ARM: DRA7: Add ABB setup for all domains

ABB should be initialized for all required domains voltage domain
for DRA7: IVA, GPU, EVE in addition to the existing MPU domain. If
we do not do this, kernel configuring just the frequency using the
default boot loader configured voltage can fail on many corner lot
units and has been hard to debug. This specifically is a concern with
DRA7 generation of SoCs since other than VDD_MPU, all other domains
are only permitted to setup the voltages to required OPP only at boot.

Reported-by: Richard Woodruff <r-woodruff2@ti.com>
Signed-off-by: Nishanth Menon <nm@ti.com>

1 files changed, 9 insertions, 0 deletions

diff --git a/arch/arm/include/asm/omap_common.h b/arch/arm/include/asm/omap_common.h
index 14c07fab34..8fb05e18b9 100644
--- a/arch/arm/include/asm/omap_common.h
+++ b/arch/arm/include/asm/omap_common.h
@@ -324,6 +324,12 @@ struct prcm_regs {
 	u32 prm_abbldo_mpu_ctrl;
 	u32 prm_abbldo_mm_setup;
 	u32 prm_abbldo_mm_ctrl;
+	u32 prm_abbldo_iva_setup;
+	u32 prm_abbldo_iva_ctrl;
+	u32 prm_abbldo_eve_setup;
+	u32 prm_abbldo_eve_ctrl;
+	u32 prm_abbldo_gpu_setup;
+	u32 prm_abbldo_gpu_ctrl;
 
 	u32 cm_div_m4_dpll_core;
 	u32 cm_div_m5_dpll_core;
@@ -445,6 +451,9 @@ struct omap_sys_ctrl_regs {
 	u32 control_emif2_sdram_config_ext;
 	u32 control_wkup_ldovbb_mpu_voltage_ctrl;
 	u32 control_wkup_ldovbb_mm_voltage_ctrl;
+	u32 control_wkup_ldovbb_iva_voltage_ctrl;
+	u32 control_wkup_ldovbb_eve_voltage_ctrl;
+	u32 control_wkup_ldovbb_gpu_voltage_ctrl;
 	u32 control_smart1nopmio_padconf_0;
 	u32 control_smart1nopmio_padconf_1;
 	u32 control_padconf_mode;