diff options
| author | pekon gupta <pekon@ti.com> | 2014-07-22 16:03:24 +0530 |
|---|---|---|
| committer | Tom Rini <trini@ti.com> | 2014-08-25 10:48:12 -0400 |
| commit | 9352697aa060e9b1b5d891e4490fdfa6f5ba6114 (patch) | |
| tree | 3b99b784f58c2f384f4fe18e562b6911d8f130f9 /arch/arm/include/asm/arch-omap5 | |
| parent | 54a97d2849979acd84a0475486edf0d0c18e47c7 (diff) | |
| download | talos-obmc-uboot-9352697aa060e9b1b5d891e4490fdfa6f5ba6114.tar.gz talos-obmc-uboot-9352697aa060e9b1b5d891e4490fdfa6f5ba6114.zip | |
board/ti/dra7xx: add support for parallel NOR
This patch adds support for parallel NOR device (S29GL512S10) present on J6-EVM.
The Flash device is connected to GPMC controller on chip-select[0] and accessed
as memory-mapped device. It has data-witdh=x16, capacity-64MBytes(512Mbits) and
is CFI compatible.
As multiple devices are share GPMC pins on this board, so following board
settings are required to detect NOR device:
SW5.1 (NAND_BOOTn) = OFF (logic-1)
SW5.2 (NOR_BOOTn) = ON (logic-0) /* Active-low */
SW5.3 (eMMC_BOOTn) = OFF (logic-1)
SW5.4 (QSPI_BOOTn) = OFF (logic-1)
And also set appropriate SYSBOOT configurations:
SW3.1 (SYSBOOT[ 8])= ON (logic-1) /* selects SYS_CLK1 speed */
SW3.2 (SYSBOOT[ 9])= OFF (logic-0) /* selects SYS_CLK1 speed */
SW3.3 (SYSBOOT[10])= ON (logic-1) /* wait-pin monitoring = enabled */
SW3.4 (SYSBOOT[11])= OFF (logic-0) /* device type: Non Muxed */
SW3.5 (SYSBOOT[12])= OFF (logic-0) /* device type: Non Muxed */
SW3.6 (SYSBOOT[13])= ON (logic-1) /* device bus-width: 1(x16) */
SW3.7 (SYSBOOT[14])= OFF (logic-0) /* reserved */
SW3.8 (SYSBOOT[15])= ON (logic-1) /* reserved */
Also, following changes are required to enable NOR Flash support in
dra7xx_evm board profile:
Diffstat (limited to 'arch/arm/include/asm/arch-omap5')
| -rw-r--r-- | arch/arm/include/asm/arch-omap5/mem.h | 12 |
1 files changed, 6 insertions, 6 deletions
diff --git a/arch/arm/include/asm/arch-omap5/mem.h b/arch/arm/include/asm/arch-omap5/mem.h index d2e708bba5..3e5d655de9 100644 --- a/arch/arm/include/asm/arch-omap5/mem.h +++ b/arch/arm/include/asm/arch-omap5/mem.h @@ -46,13 +46,13 @@ #define M_NAND_GPMC_CONFIG6 0x16000f80 #define M_NAND_GPMC_CONFIG7 0x00000008 -#define STNOR_GPMC_CONFIG1 0x00001200 -#define STNOR_GPMC_CONFIG2 0x00101000 -#define STNOR_GPMC_CONFIG3 0x00030301 -#define STNOR_GPMC_CONFIG4 0x10041004 -#define STNOR_GPMC_CONFIG5 0x000C1010 +#define STNOR_GPMC_CONFIG1 0x00001000 +#define STNOR_GPMC_CONFIG2 0x001f1f00 +#define STNOR_GPMC_CONFIG3 0x001f1f01 +#define STNOR_GPMC_CONFIG4 0x1f011f01 +#define STNOR_GPMC_CONFIG5 0x001d1f1f #define STNOR_GPMC_CONFIG6 0x08070280 -#define STNOR_GPMC_CONFIG7 0x00000F48 +#define STNOR_GPMC_CONFIG7 0x00000048 /* max number of GPMC Chip Selects */ #define GPMC_MAX_CS 8 |
