ARM: bcm283x: move SoC headers to mach-bcm283x/include/mach

Move arch/arm/include/asm/arch-bcm283x/*
  -> arch/arm/mach-bcm283x/include/mach/*

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Stephen Warren <swarren@wwwdotorg.org>

1 files changed, 0 insertions, 527 deletions

diff --git a/arch/arm/include/asm/arch-bcm2835/mbox.h b/arch/arm/include/asm/arch-bcm2835/mbox.h
deleted file mode 100644
index 04bf480a54..0000000000
--- a/arch/arm/include/asm/arch-bcm2835/mbox.h
+++ /dev/null
@@ -1,527 +0,0 @@
-/*
- * (C) Copyright 2012,2015 Stephen Warren
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#ifndef _BCM2835_MBOX_H
-#define _BCM2835_MBOX_H
-
-#include <linux/compiler.h>
-
-/*
- * The BCM2835 SoC contains (at least) two CPUs; the VideoCore (a/k/a "GPU")
- * and the ARM CPU. The ARM CPU is often thought of as the main CPU.
- * However, the VideoCore actually controls the initial SoC boot, and hides
- * much of the hardware behind a protocol. This protocol is transported
- * using the SoC's mailbox hardware module.
- *
- * The mailbox hardware supports passing 32-bit values back and forth.
- * Presumably by software convention of the firmware, the bottom 4 bits of the
- * value are used to indicate a logical channel, and the upper 28 bits are the
- * actual payload. Various channels exist using these simple raw messages. See
- * https://github.com/raspberrypi/firmware/wiki/Mailboxes for a list. As an
- * example, the messages on the power management channel are a bitmask of
- * devices whose power should be enabled.
- *
- * The property mailbox channel passes messages that contain the (16-byte
- * aligned) ARM physical address of a memory buffer. This buffer is passed to
- * the VC for processing, is modified in-place by the VC, and the address then
- * passed back to the ARM CPU as the response mailbox message to indicate
- * request completion. The buffers have a generic and extensible format; each
- * buffer contains a standard header, a list of "tags", and a terminating zero
- * entry. Each tag contains an ID indicating its type, and length fields for
- * generic parsing. With some limitations, an arbitrary set of tags may be
- * combined together into a single message buffer. This file defines structs
- * representing the header and many individual tag layouts and IDs.
- */
-
-/* Raw mailbox HW */
-
-#ifdef CONFIG_BCM2836
-#define BCM2835_MBOX_PHYSADDR	0x3f00b880
-#else
-#define BCM2835_MBOX_PHYSADDR	0x2000b880
-#endif
-
-struct bcm2835_mbox_regs {
-	u32 read;
-	u32 rsvd0[5];
-	u32 status;
-	u32 config;
-	u32 write;
-};
-
-#define BCM2835_MBOX_STATUS_WR_FULL	0x80000000
-#define BCM2835_MBOX_STATUS_RD_EMPTY	0x40000000
-
-/* Lower 4-bits are channel ID */
-#define BCM2835_CHAN_MASK		0xf
-#define BCM2835_MBOX_PACK(chan, data)	(((data) & (~BCM2835_CHAN_MASK)) | \
-					 (chan & BCM2835_CHAN_MASK))
-#define BCM2835_MBOX_UNPACK_CHAN(val)	((val) & BCM2835_CHAN_MASK)
-#define BCM2835_MBOX_UNPACK_DATA(val)	((val) & (~BCM2835_CHAN_MASK))
-
-/* Property mailbox buffer structures */
-
-#define BCM2835_MBOX_PROP_CHAN		8
-
-/* All message buffers must start with this header */
-struct bcm2835_mbox_hdr {
-	u32 buf_size;
-	u32 code;
-};
-
-#define BCM2835_MBOX_REQ_CODE		0
-#define BCM2835_MBOX_RESP_CODE_SUCCESS	0x80000000
-
-#define BCM2835_MBOX_INIT_HDR(_m_) { \
-		memset((_m_), 0, sizeof(*(_m_))); \
-		(_m_)->hdr.buf_size = sizeof(*(_m_)); \
-		(_m_)->hdr.code = 0; \
-		(_m_)->end_tag = 0; \
-	}
-
-/*
- * A message buffer contains a list of tags. Each tag must also start with
- * a standardized header.
- */
-struct bcm2835_mbox_tag_hdr {
-	u32 tag;
-	u32 val_buf_size;
-	u32 val_len;
-};
-
-#define BCM2835_MBOX_INIT_TAG(_t_, _id_) { \
-		(_t_)->tag_hdr.tag = BCM2835_MBOX_TAG_##_id_; \
-		(_t_)->tag_hdr.val_buf_size = sizeof((_t_)->body); \
-		(_t_)->tag_hdr.val_len = sizeof((_t_)->body.req); \
-	}
-
-#define BCM2835_MBOX_INIT_TAG_NO_REQ(_t_, _id_) { \
-		(_t_)->tag_hdr.tag = BCM2835_MBOX_TAG_##_id_; \
-		(_t_)->tag_hdr.val_buf_size = sizeof((_t_)->body); \
-		(_t_)->tag_hdr.val_len = 0; \
-	}
-
-/* When responding, the VC sets this bit in val_len to indicate a response */
-#define BCM2835_MBOX_TAG_VAL_LEN_RESPONSE	0x80000000
-
-/*
- * Below we define the ID and struct for many possible tags. This header only
- * defines individual tag structs, not entire message structs, since in
- * general an arbitrary set of tags may be combined into a single message.
- * Clients of the mbox API are expected to define their own overall message
- * structures by combining the header, a set of tags, and a terminating
- * entry. For example,
- *
- * struct msg {
- *     struct bcm2835_mbox_hdr hdr;
- *     struct bcm2835_mbox_tag_get_arm_mem get_arm_mem;
- *     ... perhaps other tags here ...
- *     u32 end_tag;
- * };
- */
-
-#define BCM2835_MBOX_TAG_GET_BOARD_REV	0x00010002
-
-#ifdef CONFIG_BCM2836
-#define BCM2836_BOARD_REV_2_B		0x4
-#else
-/*
- * 0x2..0xf from:
- * http://raspberryalphaomega.org.uk/2013/02/06/automatic-raspberry-pi-board-revision-detection-model-a-b1-and-b2/
- * http://www.raspberrypi.org/forums/viewtopic.php?f=63&t=32733
- * 0x10, 0x11 from swarren's testing
- */
-#define BCM2835_BOARD_REV_B_I2C0_2	0x2
-#define BCM2835_BOARD_REV_B_I2C0_3	0x3
-#define BCM2835_BOARD_REV_B_I2C1_4	0x4
-#define BCM2835_BOARD_REV_B_I2C1_5	0x5
-#define BCM2835_BOARD_REV_B_I2C1_6	0x6
-#define BCM2835_BOARD_REV_A_7		0x7
-#define BCM2835_BOARD_REV_A_8		0x8
-#define BCM2835_BOARD_REV_A_9		0x9
-#define BCM2835_BOARD_REV_B_REV2_d	0xd
-#define BCM2835_BOARD_REV_B_REV2_e	0xe
-#define BCM2835_BOARD_REV_B_REV2_f	0xf
-#define BCM2835_BOARD_REV_B_PLUS	0x10
-#define BCM2835_BOARD_REV_CM		0x11
-#define BCM2835_BOARD_REV_A_PLUS	0x12
-#endif
-
-struct bcm2835_mbox_tag_get_board_rev {
-	struct bcm2835_mbox_tag_hdr tag_hdr;
-	union {
-		struct {
-		} req;
-		struct {
-			u32 rev;
-		} resp;
-	} body;
-};
-
-#define BCM2835_MBOX_TAG_GET_MAC_ADDRESS	0x00010003
-
-struct bcm2835_mbox_tag_get_mac_address {
-	struct bcm2835_mbox_tag_hdr tag_hdr;
-	union {
-		struct {
-		} req;
-		struct {
-			u8 mac[6];
-			u8 pad[2];
-		} resp;
-	} body;
-};
-
-#define BCM2835_MBOX_TAG_GET_ARM_MEMORY		0x00010005
-
-struct bcm2835_mbox_tag_get_arm_mem {
-	struct bcm2835_mbox_tag_hdr tag_hdr;
-	union {
-		struct {
-		} req;
-		struct {
-			u32 mem_base;
-			u32 mem_size;
-		} resp;
-	} body;
-};
-
-#define BCM2835_MBOX_POWER_DEVID_SDHCI		0
-#define BCM2835_MBOX_POWER_DEVID_UART0		1
-#define BCM2835_MBOX_POWER_DEVID_UART1		2
-#define BCM2835_MBOX_POWER_DEVID_USB_HCD	3
-#define BCM2835_MBOX_POWER_DEVID_I2C0		4
-#define BCM2835_MBOX_POWER_DEVID_I2C1		5
-#define BCM2835_MBOX_POWER_DEVID_I2C2		6
-#define BCM2835_MBOX_POWER_DEVID_SPI		7
-#define BCM2835_MBOX_POWER_DEVID_CCP2TX		8
-
-#define BCM2835_MBOX_POWER_STATE_RESP_ON	(1 << 0)
-/* Device doesn't exist */
-#define BCM2835_MBOX_POWER_STATE_RESP_NODEV	(1 << 1)
-
-#define BCM2835_MBOX_TAG_GET_POWER_STATE	0x00020001
-
-struct bcm2835_mbox_tag_get_power_state {
-	struct bcm2835_mbox_tag_hdr tag_hdr;
-	union {
-		struct {
-			u32 device_id;
-		} req;
-		struct {
-			u32 device_id;
-			u32 state;
-		} resp;
-	} body;
-};
-
-#define BCM2835_MBOX_TAG_SET_POWER_STATE	0x00028001
-
-#define BCM2835_MBOX_SET_POWER_STATE_REQ_ON	(1 << 0)
-#define BCM2835_MBOX_SET_POWER_STATE_REQ_WAIT	(1 << 1)
-
-struct bcm2835_mbox_tag_set_power_state {
-	struct bcm2835_mbox_tag_hdr tag_hdr;
-	union {
-		struct {
-			u32 device_id;
-			u32 state;
-		} req;
-		struct {
-			u32 device_id;
-			u32 state;
-		} resp;
-	} body;
-};
-
-#define BCM2835_MBOX_TAG_GET_CLOCK_RATE	0x00030002
-
-#define BCM2835_MBOX_CLOCK_ID_EMMC	1
-#define BCM2835_MBOX_CLOCK_ID_UART	2
-#define BCM2835_MBOX_CLOCK_ID_ARM	3
-#define BCM2835_MBOX_CLOCK_ID_CORE	4
-#define BCM2835_MBOX_CLOCK_ID_V3D	5
-#define BCM2835_MBOX_CLOCK_ID_H264	6
-#define BCM2835_MBOX_CLOCK_ID_ISP	7
-#define BCM2835_MBOX_CLOCK_ID_SDRAM	8
-#define BCM2835_MBOX_CLOCK_ID_PIXEL	9
-#define BCM2835_MBOX_CLOCK_ID_PWM	10
-
-struct bcm2835_mbox_tag_get_clock_rate {
-	struct bcm2835_mbox_tag_hdr tag_hdr;
-	union {
-		struct {
-			u32 clock_id;
-		} req;
-		struct {
-			u32 clock_id;
-			u32 rate_hz;
-		} resp;
-	} body;
-};
-
-#define BCM2835_MBOX_TAG_ALLOCATE_BUFFER	0x00040001
-
-struct bcm2835_mbox_tag_allocate_buffer {
-	struct bcm2835_mbox_tag_hdr tag_hdr;
-	union {
-		struct {
-			u32 alignment;
-		} req;
-		struct {
-			u32 fb_address;
-			u32 fb_size;
-		} resp;
-	} body;
-};
-
-#define BCM2835_MBOX_TAG_RELEASE_BUFFER		0x00048001
-
-struct bcm2835_mbox_tag_release_buffer {
-	struct bcm2835_mbox_tag_hdr tag_hdr;
-	union {
-		struct {
-		} req;
-		struct {
-		} resp;
-	} body;
-};
-
-#define BCM2835_MBOX_TAG_BLANK_SCREEN		0x00040002
-
-struct bcm2835_mbox_tag_blank_screen {
-	struct bcm2835_mbox_tag_hdr tag_hdr;
-	union {
-		struct {
-			/* bit 0 means on, other bots reserved */
-			u32 state;
-		} req;
-		struct {
-			u32 state;
-		} resp;
-	} body;
-};
-
-/* Physical means output signal */
-#define BCM2835_MBOX_TAG_GET_PHYSICAL_W_H	0x00040003
-#define BCM2835_MBOX_TAG_TEST_PHYSICAL_W_H	0x00044003
-#define BCM2835_MBOX_TAG_SET_PHYSICAL_W_H	0x00048003
-
-struct bcm2835_mbox_tag_physical_w_h {
-	struct bcm2835_mbox_tag_hdr tag_hdr;
-	union {
-		/* req not used for get */
-		struct {
-			u32 width;
-			u32 height;
-		} req;
-		struct {
-			u32 width;
-			u32 height;
-		} resp;
-	} body;
-};
-
-/* Virtual means display buffer */
-#define BCM2835_MBOX_TAG_GET_VIRTUAL_W_H	0x00040004
-#define BCM2835_MBOX_TAG_TEST_VIRTUAL_W_H	0x00044004
-#define BCM2835_MBOX_TAG_SET_VIRTUAL_W_H	0x00048004
-
-struct bcm2835_mbox_tag_virtual_w_h {
-	struct bcm2835_mbox_tag_hdr tag_hdr;
-	union {
-		/* req not used for get */
-		struct {
-			u32 width;
-			u32 height;
-		} req;
-		struct {
-			u32 width;
-			u32 height;
-		} resp;
-	} body;
-};
-
-#define BCM2835_MBOX_TAG_GET_DEPTH		0x00040005
-#define BCM2835_MBOX_TAG_TEST_DEPTH		0x00044005
-#define BCM2835_MBOX_TAG_SET_DEPTH		0x00048005
-
-struct bcm2835_mbox_tag_depth {
-	struct bcm2835_mbox_tag_hdr tag_hdr;
-	union {
-		/* req not used for get */
-		struct {
-			u32 bpp;
-		} req;
-		struct {
-			u32 bpp;
-		} resp;
-	} body;
-};
-
-#define BCM2835_MBOX_TAG_GET_PIXEL_ORDER	0x00040006
-#define BCM2835_MBOX_TAG_TEST_PIXEL_ORDER	0x00044005
-#define BCM2835_MBOX_TAG_SET_PIXEL_ORDER	0x00048006
-
-#define BCM2835_MBOX_PIXEL_ORDER_BGR		0
-#define BCM2835_MBOX_PIXEL_ORDER_RGB		1
-
-struct bcm2835_mbox_tag_pixel_order {
-	struct bcm2835_mbox_tag_hdr tag_hdr;
-	union {
-		/* req not used for get */
-		struct {
-			u32 order;
-		} req;
-		struct {
-			u32 order;
-		} resp;
-	} body;
-};
-
-#define BCM2835_MBOX_TAG_GET_ALPHA_MODE		0x00040007
-#define BCM2835_MBOX_TAG_TEST_ALPHA_MODE	0x00044007
-#define BCM2835_MBOX_TAG_SET_ALPHA_MODE		0x00048007
-
-#define BCM2835_MBOX_ALPHA_MODE_0_OPAQUE	0
-#define BCM2835_MBOX_ALPHA_MODE_0_TRANSPARENT	1
-#define BCM2835_MBOX_ALPHA_MODE_IGNORED		2
-
-struct bcm2835_mbox_tag_alpha_mode {
-	struct bcm2835_mbox_tag_hdr tag_hdr;
-	union {
-		/* req not used for get */
-		struct {
-			u32 alpha;
-		} req;
-		struct {
-			u32 alpha;
-		} resp;
-	} body;
-};
-
-#define BCM2835_MBOX_TAG_GET_PITCH		0x00040008
-
-struct bcm2835_mbox_tag_pitch {
-	struct bcm2835_mbox_tag_hdr tag_hdr;
-	union {
-		struct {
-		} req;
-		struct {
-			u32 pitch;
-		} resp;
-	} body;
-};
-
-/* Offset of display window within buffer */
-#define BCM2835_MBOX_TAG_GET_VIRTUAL_OFFSET	0x00040009
-#define BCM2835_MBOX_TAG_TEST_VIRTUAL_OFFSET	0x00044009
-#define BCM2835_MBOX_TAG_SET_VIRTUAL_OFFSET	0x00048009
-
-struct bcm2835_mbox_tag_virtual_offset {
-	struct bcm2835_mbox_tag_hdr tag_hdr;
-	union {
-		/* req not used for get */
-		struct {
-			u32 x;
-			u32 y;
-		} req;
-		struct {
-			u32 x;
-			u32 y;
-		} resp;
-	} body;
-};
-
-#define BCM2835_MBOX_TAG_GET_OVERSCAN		0x0004000a
-#define BCM2835_MBOX_TAG_TEST_OVERSCAN		0x0004400a
-#define BCM2835_MBOX_TAG_SET_OVERSCAN		0x0004800a
-
-struct bcm2835_mbox_tag_overscan {
-	struct bcm2835_mbox_tag_hdr tag_hdr;
-	union {
-		/* req not used for get */
-		struct {
-			u32 top;
-			u32 bottom;
-			u32 left;
-			u32 right;
-		} req;
-		struct {
-			u32 top;
-			u32 bottom;
-			u32 left;
-			u32 right;
-		} resp;
-	} body;
-};
-
-#define BCM2835_MBOX_TAG_GET_PALETTE		0x0004000b
-
-struct bcm2835_mbox_tag_get_palette {
-	struct bcm2835_mbox_tag_hdr tag_hdr;
-	union {
-		struct {
-		} req;
-		struct {
-			u32 data[1024];
-		} resp;
-	} body;
-};
-
-#define BCM2835_MBOX_TAG_TEST_PALETTE		0x0004400b
-
-struct bcm2835_mbox_tag_test_palette {
-	struct bcm2835_mbox_tag_hdr tag_hdr;
-	union {
-		struct {
-			u32 offset;
-			u32 num_entries;
-			u32 data[256];
-		} req;
-		struct {
-			u32 is_invalid;
-		} resp;
-	} body;
-};
-
-#define BCM2835_MBOX_TAG_SET_PALETTE		0x0004800b
-
-struct bcm2835_mbox_tag_set_palette {
-	struct bcm2835_mbox_tag_hdr tag_hdr;
-	union {
-		struct {
-			u32 offset;
-			u32 num_entries;
-			u32 data[256];
-		} req;
-		struct {
-			u32 is_invalid;
-		} resp;
-	} body;
-};
-
-/*
- * Pass a raw u32 message to the VC, and receive a raw u32 back.
- *
- * Returns 0 for success, any other value for error.
- */
-int bcm2835_mbox_call_raw(u32 chan, u32 send, u32 *recv);
-
-/*
- * Pass a complete property-style buffer to the VC, and wait until it has
- * been processed.
- *
- * This function expects a pointer to the mbox_hdr structure in an attempt
- * to ensure some degree of type safety. However, some number of tags and
- * a termination value are expected to immediately follow the header in
- * memory, as required by the property protocol.
- *
- * Returns 0 for success, any other value for error.
- */
-int bcm2835_mbox_call_prop(u32 chan, struct bcm2835_mbox_hdr *buffer);
-
-#endif