summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
authorMateusz Kulikowski <mateusz.kulikowski@gmail.com>2016-03-31 23:12:28 +0200
committerTom Rini <trini@konsulko.com>2016-04-01 17:18:12 -0400
commitd33776e43dc8471ab03920dda77b00333a8ddd3e (patch)
tree6aa15b2e9fe52e476c02c647c0ccc2493a77a79a
parent04868b407b624c414805c9e9a79195eeb3a14829 (diff)
downloadtalos-obmc-uboot-d33776e43dc8471ab03920dda77b00333a8ddd3e.tar.gz
talos-obmc-uboot-d33776e43dc8471ab03920dda77b00333a8ddd3e.zip
spmi: Add sandbox test driver
This patch adds emulated spmi bus controller with part of pm8916 pmic on it to sandbox and tests validating SPMI uclass. Signed-off-by: Mateusz Kulikowski <mateusz.kulikowski@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
-rw-r--r--arch/sandbox/dts/sandbox.dts20
-rw-r--r--arch/sandbox/dts/test.dts20
-rw-r--r--configs/sandbox_defconfig4
-rw-r--r--doc/device-tree-bindings/spmi/spmi-sandbox.txt31
-rw-r--r--drivers/spmi/Kconfig8
-rw-r--r--drivers/spmi/Makefile1
-rw-r--r--drivers/spmi/spmi-sandbox.c157
-rw-r--r--test/dm/Makefile1
-rw-r--r--test/dm/spmi.c114
9 files changed, 356 insertions, 0 deletions
diff --git a/arch/sandbox/dts/sandbox.dts b/arch/sandbox/dts/sandbox.dts
index e3f02bf13c..2ae40148b0 100644
--- a/arch/sandbox/dts/sandbox.dts
+++ b/arch/sandbox/dts/sandbox.dts
@@ -240,6 +240,26 @@
status = "disabled";
};
+ spmi: spmi@0 {
+ compatible = "sandbox,spmi";
+ #address-cells = <0x1>;
+ #size-cells = <0x1>;
+ pm8916@0 {
+ compatible = "qcom,spmi-pmic";
+ reg = <0x0 0x1>;
+ #address-cells = <0x1>;
+ #size-cells = <0x1>;
+
+ spmi_gpios: gpios@c000 {
+ compatible = "qcom,pm8916-gpio";
+ reg = <0xc000 0x400>;
+ gpio-controller;
+ gpio-count = <4>;
+ #gpio-cells = <2>;
+ gpio-bank-name="spmi";
+ };
+ };
+ };
};
#include "cros-ec-keyboard.dtsi"
diff --git a/arch/sandbox/dts/test.dts b/arch/sandbox/dts/test.dts
index 9b8d658bf3..89300096a5 100644
--- a/arch/sandbox/dts/test.dts
+++ b/arch/sandbox/dts/test.dts
@@ -351,6 +351,26 @@
status = "disabled";
};
+ spmi: spmi@0 {
+ compatible = "sandbox,spmi";
+ #address-cells = <0x1>;
+ #size-cells = <0x1>;
+ pm8916@0 {
+ compatible = "qcom,spmi-pmic";
+ reg = <0x0 0x1>;
+ #address-cells = <0x1>;
+ #size-cells = <0x1>;
+
+ spmi_gpios: gpios@c000 {
+ compatible = "qcom,pm8916-gpio";
+ reg = <0xc000 0x400>;
+ gpio-controller;
+ gpio-count = <4>;
+ #gpio-cells = <2>;
+ gpio-bank-name="spmi";
+ };
+ };
+ };
};
#include "sandbox_pmic.dtsi"
diff --git a/configs/sandbox_defconfig b/configs/sandbox_defconfig
index d69c9fc25d..bfc8b61b1a 100644
--- a/configs/sandbox_defconfig
+++ b/configs/sandbox_defconfig
@@ -31,6 +31,7 @@ CONFIG_ADC_SANDBOX=y
CONFIG_BLK=y
CONFIG_CLK=y
CONFIG_SANDBOX_GPIO=y
+CONFIG_PM8916_GPIO=y
CONFIG_SYS_I2C_SANDBOX=y
CONFIG_CROS_EC_KEYB=y
CONFIG_LED=y
@@ -59,6 +60,9 @@ CONFIG_PINCONF=y
CONFIG_PINCTRL_SANDBOX=y
CONFIG_DM_PMIC=y
CONFIG_DM_PMIC_SANDBOX=y
+CONFIG_PMIC_PM8916=y
+CONFIG_SPMI=y
+CONFIG_SPMI_SANDBOX=y
CONFIG_DM_REGULATOR=y
CONFIG_DM_REGULATOR_SANDBOX=y
CONFIG_RAM=y
diff --git a/doc/device-tree-bindings/spmi/spmi-sandbox.txt b/doc/device-tree-bindings/spmi/spmi-sandbox.txt
new file mode 100644
index 0000000000..8569a1a840
--- /dev/null
+++ b/doc/device-tree-bindings/spmi/spmi-sandbox.txt
@@ -0,0 +1,31 @@
+Sandbox SPMI emulated arbiter.
+
+This is bus driver for Sandbox. It includes part of emulated pm8916 pmic.
+
+Required properties:
+- compatible: "sandbox,spmi"
+- #address-cells: 0x1 - childs slave ID address
+- #size-cells: 0x1
+
+Example:
+
+spmi: spmi@0 {
+ compatible = "sandbox,spmi";
+ #address-cells = <0x1>;
+ #size-cells = <0x1>;
+ pm8916@0 {
+ compatible = "qcom,spmi-pmic";
+ reg = <0x0 0x1>;
+ #address-cells = <0x1>;
+ #size-cells = <0x1>;
+
+ spmi_gpios: gpios@c000 {
+ compatible = "qcom,pm8916-gpio";
+ reg = <0xc000 0x400>;
+ gpio-controller;
+ gpio-count = <4>;
+ #gpio-cells = <2>;
+ gpio-bank-name="spmi";
+ };
+ };
+};
diff --git a/drivers/spmi/Kconfig b/drivers/spmi/Kconfig
index 0b9bd31206..c70d67582d 100644
--- a/drivers/spmi/Kconfig
+++ b/drivers/spmi/Kconfig
@@ -7,4 +7,12 @@ config SPMI
Select this to enable to support SPMI bus.
SPMI (System Power Management Interface) bus is used
to connect PMIC devices on various SoCs.
+
+config SPMI_SANDBOX
+ boolean "Support for Sandbox SPMI bus"
+ depends on SPMI
+ ---help---
+ Demo SPMI bus implementation. Emulates part of PM8916 as single
+ slave (0) on bus. It has 4 GPIO peripherals, pid 0xC0-0xC3.
+
endmenu
diff --git a/drivers/spmi/Makefile b/drivers/spmi/Makefile
index 99092eba53..4ca65a99d8 100644
--- a/drivers/spmi/Makefile
+++ b/drivers/spmi/Makefile
@@ -5,3 +5,4 @@
#
obj-$(CONFIG_SPMI) += spmi-uclass.o
+obj-$(CONFIG_SPMI_SANDBOX) += spmi-sandbox.o
diff --git a/drivers/spmi/spmi-sandbox.c b/drivers/spmi/spmi-sandbox.c
new file mode 100644
index 0000000000..2f0fea07e8
--- /dev/null
+++ b/drivers/spmi/spmi-sandbox.c
@@ -0,0 +1,157 @@
+/*
+ * Sample SPMI bus driver
+ *
+ * It emulates bus with single pm8916-like pmic that has only GPIO reigsters.
+ *
+ * (C) Copyright 2015 Mateusz Kulikowski <mateusz.kulikowski@gmail.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <dm.h>
+#include <errno.h>
+#include <spmi/spmi.h>
+#include <asm/gpio.h>
+#include <asm/io.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+#define EMUL_GPIO_PID_START 0xC0
+#define EMUL_GPIO_PID_END 0xC3
+
+#define EMUL_GPIO_COUNT 4
+
+#define EMUL_GPIO_REG_END 0x46 /* Last valid register */
+
+#define EMUL_PERM_R 0x1
+#define EMUL_PERM_W 0x2
+#define EMUL_PERM_RW (EMUL_PERM_R | EMUL_PERM_W)
+
+struct sandbox_emul_fake_regs {
+ u8 value;
+ u8 access_mask;
+ u8 perms; /* Access permissions */
+};
+
+struct sandbox_emul_gpio {
+ struct sandbox_emul_fake_regs r[EMUL_GPIO_REG_END]; /* Fake registers */
+};
+
+struct sandbox_spmi_priv {
+ struct sandbox_emul_gpio gpios[EMUL_GPIO_COUNT];
+};
+
+/* Check if valid register was requested */
+static bool check_address_valid(int usid, int pid, int off)
+{
+ if (usid != 0)
+ return false;
+ if (pid < EMUL_GPIO_PID_START || pid > EMUL_GPIO_PID_END)
+ return false;
+ if (off > EMUL_GPIO_REG_END)
+ return false;
+ return true;
+}
+
+static int sandbox_spmi_write(struct udevice *dev, int usid, int pid, int off,
+ uint8_t val)
+{
+ struct sandbox_spmi_priv *priv = dev_get_priv(dev);
+ struct sandbox_emul_fake_regs *regs;
+
+ if (!check_address_valid(usid, pid, off))
+ return -EIO;
+
+ regs = priv->gpios[pid & 0x3].r; /* Last 3 bits of pid are gpio # */
+
+ switch (off) {
+ case 0x40: /* Control */
+ val &= regs[off].access_mask;
+ if (((val & 0x30) == 0x10) || ((val & 0x30) == 0x20)) {
+ /* out/inout - set status register */
+ regs[0x8].value &= ~0x1;
+ regs[0x8].value |= val & 0x1;
+ }
+ break;
+ default:
+ if (regs[off].perms & EMUL_PERM_W)
+ regs[off].value = val & regs[off].access_mask;
+ }
+ return 0;
+}
+
+static int sandbox_spmi_read(struct udevice *dev, int usid, int pid, int off)
+{
+ struct sandbox_spmi_priv *priv = dev_get_priv(dev);
+ struct sandbox_emul_fake_regs *regs;
+
+ if (!check_address_valid(usid, pid, off))
+ return -EIO;
+
+ regs = priv->gpios[pid & 0x3].r; /* Last 3 bits of pid are gpio # */
+
+ if (regs[0x46].value == 0) /* Block disabled */
+ return 0;
+
+ switch (off) {
+ case 0x8: /* Status */
+ if (regs[0x46].value == 0) /* Block disabled */
+ return 0;
+ return regs[off].value;
+ default:
+ if (regs[off].perms & EMUL_PERM_R)
+ return regs[off].value;
+ else
+ return 0;
+ }
+}
+
+static struct dm_spmi_ops sandbox_spmi_ops = {
+ .read = sandbox_spmi_read,
+ .write = sandbox_spmi_write,
+};
+
+static int sandbox_spmi_probe(struct udevice *dev)
+{
+ struct sandbox_spmi_priv *priv = dev_get_priv(dev);
+ int i;
+
+ for (i = 0; i < EMUL_GPIO_COUNT; ++i) {
+ struct sandbox_emul_fake_regs *regs = priv->gpios[i].r;
+ regs[4].perms = EMUL_PERM_R;
+ regs[4].value = 0x10;
+ regs[5].perms = EMUL_PERM_R;
+ regs[5].value = 0x5;
+ regs[8].access_mask = 0x81;
+ regs[8].perms = EMUL_PERM_RW;
+ regs[0x40].access_mask = 0x7F;
+ regs[0x40].perms = EMUL_PERM_RW;
+ regs[0x41].access_mask = 7;
+ regs[0x41].perms = EMUL_PERM_RW;
+ regs[0x42].access_mask = 7;
+ regs[0x42].perms = EMUL_PERM_RW;
+ regs[0x42].value = 0x4;
+ regs[0x45].access_mask = 0x3F;
+ regs[0x45].perms = EMUL_PERM_RW;
+ regs[0x45].value = 0x1;
+ regs[0x46].access_mask = 0x80;
+ regs[0x46].perms = EMUL_PERM_RW;
+ regs[0x46].value = 0x80;
+ }
+ return 0;
+}
+
+static const struct udevice_id sandbox_spmi_ids[] = {
+ { .compatible = "sandbox,spmi" },
+ { }
+};
+
+U_BOOT_DRIVER(msm_spmi) = {
+ .name = "sandbox_spmi",
+ .id = UCLASS_SPMI,
+ .of_match = sandbox_spmi_ids,
+ .ops = &sandbox_spmi_ops,
+ .probe = sandbox_spmi_probe,
+ .priv_auto_alloc_size = sizeof(struct sandbox_spmi_priv),
+};
diff --git a/test/dm/Makefile b/test/dm/Makefile
index df2d71fdad..9a11ae0a14 100644
--- a/test/dm/Makefile
+++ b/test/dm/Makefile
@@ -37,4 +37,5 @@ obj-$(CONFIG_DM_REGULATOR) += regulator.o
obj-$(CONFIG_TIMER) += timer.o
obj-$(CONFIG_DM_VIDEO) += video.o
obj-$(CONFIG_ADC) += adc.o
+obj-$(CONFIG_SPMI) += spmi.o
endif
diff --git a/test/dm/spmi.c b/test/dm/spmi.c
new file mode 100644
index 0000000000..d519a9015e
--- /dev/null
+++ b/test/dm/spmi.c
@@ -0,0 +1,114 @@
+/*
+ * (C) Copyright 2015 Mateusz Kulikowski <mateusz.kulikowski@gmail.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <fdtdec.h>
+#include <dm.h>
+#include <dm/device.h>
+#include <dm/root.h>
+#include <dm/test.h>
+#include <dm/util.h>
+#include <power/pmic.h>
+#include <spmi/spmi.h>
+#include <asm/gpio.h>
+#include <test/ut.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+/* Test if bus childs got probed propperly*/
+static int dm_test_spmi_probe(struct unit_test_state *uts)
+{
+ const char *name = "spmi@0";
+ struct udevice *bus, *dev;
+
+ ut_assertok(uclass_get_device(UCLASS_SPMI, 0, &bus));
+
+ /* Check bus name */
+ ut_asserteq_str(name, bus->name);
+
+ /* Check that it has some devices */
+ ut_asserteq(device_has_children(bus), true);
+
+ ut_assertok(device_find_first_child(bus, &dev));
+
+ /* There should be at least one child */
+ ut_assertnonnull(dev);
+
+ /* Check that only PMICs are connected to the bus */
+ while (dev) {
+ ut_asserteq(device_get_uclass_id(dev), UCLASS_PMIC);
+ device_find_next_child(&dev);
+ }
+
+ return 0;
+}
+DM_TEST(dm_test_spmi_probe, DM_TESTF_SCAN_FDT);
+
+/* Test if it's possible to read bus directly and indirectly */
+static int dm_test_spmi_access(struct unit_test_state *uts)
+{
+ const char *pmic_name = "pm8916@0";
+ struct udevice *bus, *pmic;
+
+ ut_assertok(uclass_get_device(UCLASS_SPMI, 0, &bus));
+
+ ut_assertok(device_get_child(bus, 0, &pmic));
+
+ /* Sanity check if it's proper PMIC */
+ ut_asserteq_str(pmic_name, pmic->name);
+
+ /* Read PMIC ID reg using SPMI bus - it assumes it has slaveID == 0*/
+ ut_asserteq(spmi_reg_read(bus, 0, 0xC0, 0x4), 0x10);
+ ut_asserteq(spmi_reg_read(bus, 0, 0xC0, 0x5), 0x5);
+
+ /* Read ID reg via pmic interface */
+ ut_asserteq(pmic_reg_read(pmic, 0xC004), 0x10);
+ ut_asserteq(pmic_reg_read(pmic, 0xC005), 0x5);
+
+ return 0;
+}
+DM_TEST(dm_test_spmi_access, DM_TESTF_SCAN_FDT);
+
+
+/* Test if it's possible to access GPIO that should be in pmic */
+static int dm_test_spmi_access_peripheral(struct unit_test_state *uts)
+{
+ struct udevice *dev;
+ unsigned int offset, gpio;
+ const char *name;
+ int offset_count;
+
+ /* Get second pin of PMIC GPIO */
+ ut_assertok(gpio_lookup_name("spmi1", &dev, &offset, &gpio));
+
+ /* Check if PMIC is parent */
+ ut_asserteq(device_get_uclass_id(dev->parent), UCLASS_PMIC);
+
+ /* This should be second gpio */
+ ut_asserteq(1, offset);
+
+ name = gpio_get_bank_info(dev, &offset_count);
+
+ /* Check bank name */
+ ut_asserteq_str("spmi", name);
+ /* Check pin count */
+ ut_asserteq(4, offset_count);
+
+ ut_assertok(gpio_request(gpio, "testing"));
+
+ /* Try to set/clear gpio */
+ ut_assertok(gpio_direction_output(gpio, 0));
+ ut_asserteq(gpio_get_value(gpio), 0);
+ ut_assertok(gpio_direction_output(gpio, 1));
+ ut_asserteq(gpio_get_value(gpio), 1);
+ ut_assertok(gpio_direction_input(gpio));
+ ut_asserteq(gpio_get_value(gpio), 1);
+
+ ut_assertok(gpio_free(gpio));
+
+ return 0;
+}
+DM_TEST(dm_test_spmi_access_peripheral, DM_TESTF_SCAN_FDT);
OpenPOWER on IntegriCloud