* Add support for MIPS32 4Kc CPUs

* Add support for INCA-IP Board

25 files changed, 5874 insertions, 3 deletions

diff --git a/CHANGELOG b/CHANGELOG
index 3beab3560f..2fa9a94a62 100644
--- a/CHANGELOG
+++ b/CHANGELOG
@@ -3,7 +3,9 @@ Changes since U-Boot 0.2.2:
 ======================================================================
 
 * Patch by Rick Bronson, 16 Mar 2003:
-  Add support for Atmel AT91RM9200DK w/NAND
+  - Add NAND flash support for reading, writing, and erasing NAND
+    flash (certain forms of which are called SmartMedia).
+  - Add support for Atmel AT91RM9200DK ARM920T based development kit.
 
 * Patches by Robert Schwebel, 19 Mar 2003:
   - use arm-linux-gcc as default compiler for ARM
@@ -36,6 +38,12 @@ Changes since U-Boot 0.2.2:
     to existing PPC405GP designs.
   - Clip udiv to 5 bits on PPC405 (serial.c).
 
+* Extend INCAIP board support:
+  - add automatic RAM size detection
+  - add "bdinfo" command
+  - pass flash address and size to Linux kernel
+  - switch to 150 MHz clock
+
 * Avoid flicker on the TRAB's VFD by synchronizing the enable with
   the HSYNC/VSYNC. Requires new CPLD code (Version 101 for Rev. 100
   boards, version 153 for Rev. 200 boards).
@@ -179,6 +187,10 @@ Changes since U-Boot 0.2.2:
 * Patch by Stefan Roese, 10 Feb 2003:
   Add support for 4MB and 128MB onboard SDRAM (cpu/ppc4xx/sdram.c)
 
+* Add support for MIPS32 4Kc CPUs
+
+* Add support for INCA-IP Board
+
 ======================================================================
 Changes for U-Boot 0.2.2:
 ======================================================================
diff --git a/CREDITS b/CREDITS
index 9139ccf75c..4a213101ed 100644
--- a/CREDITS
+++ b/CREDITS
@@ -48,7 +48,7 @@ D: 8xxrom-0.3.0
 
 N: Rick Bronson
 E: rick@efn.org
-D: Atmel AT91RM9200DK w/NAND support
+D: Atmel AT91RM9200DK and NAND support
 
 N: David Brown
 E: DBrown03@harris.com
diff --git a/MAKEALL b/MAKEALL
index e8d87e7ef1..ba4d9eb97d 100644
--- a/MAKEALL
+++ b/MAKEALL
@@ -107,6 +107,14 @@ LIST_xscale="cradle csb226 innokom lubbock"
 
 LIST_arm="${LIST_SA} ${LIST_ARM7} ${LIST_ARM9} ${LIST_xscale}"
 
+#########################################################################
+## MIPS 4Kc Systems
+#########################################################################
+
+LIST_mips4kc="incaip"
+
+LIST_mips="${LIST_mips4kc}"
+
 
 #----- for now, just run PPC by default -----
 [ $# = 0 ] && set $LIST_ppc
@@ -128,7 +136,7 @@ build_target() {
 for arg in $@
 do
 	case "$arg" in
-	8xx|824x|8260|4xx|7xx|74xx|SA|ARM7|ARM9|ppc|arm|xscale)
+	8xx|824x|8260|4xx|7xx|74xx|SA|ARM7|ARM9|ppc|arm|xscale|mips)
 			for target in `eval echo '$LIST_'${arg}`
 			do
 				build_target ${target}
diff --git a/board/incaip/Makefile b/board/incaip/Makefile
new file mode 100644
index 0000000000..ad59bf0af6
--- /dev/null
+++ b/board/incaip/Makefile
@@ -0,0 +1,41 @@
+#
+# (C) Copyright 2003
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB	= lib$(BOARD).a
+
+OBJS	= $(BOARD).o flash.o
+SOBJS	= memsetup.o
+
+$(LIB):	.depend $(OBJS) $(SOBJS)
+	$(AR) crv $@ $^
+
+#########################################################################
+
+.depend:	Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
+		$(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+
+sinclude .depend
+
+#########################################################################
diff --git a/board/incaip/config.mk b/board/incaip/config.mk
new file mode 100644
index 0000000000..0cecc011e3
--- /dev/null
+++ b/board/incaip/config.mk
@@ -0,0 +1,32 @@
+#
+# (C) Copyright 2003
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+#
+# INCA-IP board with MIPS 4Kc CPU core
+#
+
+# ROM version
+TEXT_BASE = 0xB0000000
+
+# RAM version
+#TEXT_BASE = 0x80100000
diff --git a/board/incaip/flash.c b/board/incaip/flash.c
new file mode 100644
index 0000000000..427f14a616
--- /dev/null
+++ b/board/incaip/flash.c
@@ -0,0 +1,671 @@
+/*
+ * (C) Copyright 2003
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/inca-ip.h>
+
+flash_info_t	flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips	*/
+
+/* NOTE - CONFIG_FLASH_16BIT means the CPU interface is 16-bit, it
+ *        has nothing to do with the flash chip being 8-bit or 16-bit.
+ */
+#ifdef CONFIG_FLASH_16BIT
+typedef unsigned short FLASH_PORT_WIDTH;
+typedef volatile unsigned short FLASH_PORT_WIDTHV;
+#define	FLASH_ID_MASK	0xFFFF
+#else
+typedef unsigned long FLASH_PORT_WIDTH;
+typedef volatile unsigned long FLASH_PORT_WIDTHV;
+#define	FLASH_ID_MASK	0xFFFFFFFF
+#endif
+
+#define FPW	FLASH_PORT_WIDTH
+#define FPWV	FLASH_PORT_WIDTHV
+
+#define ORMASK(size) ((-size) & OR_AM_MSK)
+
+#if 0
+#define FLASH_CYCLE1	0x0555
+#define FLASH_CYCLE2	0x02aa
+#else
+#define FLASH_CYCLE1	0x0554
+#define FLASH_CYCLE2	0x02ab
+#endif
+
+/*-----------------------------------------------------------------------
+ * Functions
+ */
+static ulong flash_get_size(FPWV *addr, flash_info_t *info);
+static void flash_reset(flash_info_t *info);
+static int write_word_intel(flash_info_t *info, FPWV *dest, FPW data);
+static int write_word_amd(flash_info_t *info, FPWV *dest, FPW data);
+static void flash_get_offsets(ulong base, flash_info_t *info);
+static flash_info_t *flash_get_info(ulong base);
+
+/*-----------------------------------------------------------------------
+ * flash_init()
+ *
+ * sets up flash_info and returns size of FLASH (bytes)
+ */
+unsigned long flash_init (void)
+{
+	unsigned long size = 0;
+	int i;
+
+	/* Init: no FLASHes known */
+	for (i=0; i < CFG_MAX_FLASH_BANKS; ++i) {
+		ulong flashbase = (i == 0) ? PHYS_FLASH_1 : PHYS_FLASH_2;
+		ulong * buscon = (ulong *)
+			((i == 0) ? INCA_IP_EBU_EBU_BUSCON0 : INCA_IP_EBU_EBU_BUSCON2);
+
+		/* Disable write protection */
+		*buscon &= ~INCA_IP_EBU_EBU_BUSCON1_WRDIS;
+
+#if 1
+		memset(&flash_info[i], 0, sizeof(flash_info_t));
+#endif
+
+		flash_info[i].size = 
+			flash_get_size((FPW *)flashbase, &flash_info[i]);
+
+		if (flash_info[i].flash_id == FLASH_UNKNOWN) {
+			printf ("## Unknown FLASH on Bank %d - Size = 0x%08lx\n",
+			i, flash_info[i].size);
+		}
+		
+		size += flash_info[i].size;
+	}
+
+#if CFG_MONITOR_BASE >= CFG_FLASH_BASE
+	/* monitor protection ON by default */
+	flash_protect(FLAG_PROTECT_SET,
+		      CFG_MONITOR_BASE,
+		      CFG_MONITOR_BASE+CFG_MONITOR_LEN-1,
+		      flash_get_info(CFG_MONITOR_BASE));
+#endif
+
+#ifdef	CFG_ENV_IS_IN_FLASH
+	/* ENV protection ON by default */
+	flash_protect(FLAG_PROTECT_SET,
+		      CFG_ENV_ADDR,
+		      CFG_ENV_ADDR+CFG_ENV_SIZE-1,
+		      flash_get_info(CFG_ENV_ADDR));
+#endif
+
+
+	return size;
+}
+
+/*-----------------------------------------------------------------------
+ */
+static void flash_reset(flash_info_t *info)
+{
+	FPWV *base = (FPWV *)(info->start[0]);
+
+	/* Put FLASH back in read mode */
+	if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_INTEL)
+		*base = (FPW)0x00FF00FF;	/* Intel Read Mode */
+	else if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_AMD)
+		*base = (FPW)0x00F000F0;	/* AMD Read Mode */
+}
+
+/*-----------------------------------------------------------------------
+ */
+static void flash_get_offsets (ulong base, flash_info_t *info)
+{
+	int i;
+
+	/* set up sector start address table */
+	if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_INTEL
+	    && (info->flash_id & FLASH_BTYPE)) {
+		int bootsect_size;	/* number of bytes/boot sector	*/
+		int sect_size;		/* number of bytes/regular sector */
+
+		bootsect_size = 0x00002000 * (sizeof(FPW)/2);
+		sect_size =     0x00010000 * (sizeof(FPW)/2);
+
+		/* set sector offsets for bottom boot block type	*/
+		for (i = 0; i < 8; ++i) {
+			info->start[i] = base + (i * bootsect_size);
+		}
+		for (i = 8; i < info->sector_count; i++) {
+			info->start[i] = base + ((i - 7) * sect_size);
+		}
+	}
+	else if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_AMD
+		 && (info->flash_id & FLASH_TYPEMASK) == FLASH_AM640U) {
+
+		int sect_size;		/* number of bytes/sector */
+
+		sect_size = 0x00010000 * (sizeof(FPW)/2);
+
+		/* set up sector start address table (uniform sector type) */
+		for( i = 0; i < info->sector_count; i++ )
+			info->start[i] = base + (i * sect_size);
+	}
+}
+
+/*-----------------------------------------------------------------------
+ */
+
+static flash_info_t *flash_get_info(ulong base)
+{
+	int i;
+	flash_info_t * info;
+	
+	for (i = 0; i < CFG_MAX_FLASH_BANKS; i ++) {
+		info = & flash_info[i];
+		if (info->start[0] <= base && base < info->start[0] + info->size)
+			break;
+	}
+	
+	return i == CFG_MAX_FLASH_BANKS ? 0 : info;
+}
+
+/*-----------------------------------------------------------------------
+ */
+
+void flash_print_info (flash_info_t *info)
+{
+	int i;
+	uchar *boottype;
+	uchar *bootletter;
+	uchar *fmt;
+	uchar botbootletter[] = "B";
+	uchar topbootletter[] = "T";
+	uchar botboottype[] = "bottom boot sector";
+	uchar topboottype[] = "top boot sector";
+
+	if (info->flash_id == FLASH_UNKNOWN) {
+		printf ("missing or unknown FLASH type\n");
+		return;
+	}
+
+	switch (info->flash_id & FLASH_VENDMASK) {
+	case FLASH_MAN_AMD:	printf ("AMD ");		break;
+	case FLASH_MAN_BM:	printf ("BRIGHT MICRO ");	break;
+	case FLASH_MAN_FUJ:	printf ("FUJITSU ");		break;
+	case FLASH_MAN_SST:	printf ("SST ");		break;
+	case FLASH_MAN_STM:	printf ("STM ");		break;
+	case FLASH_MAN_INTEL:	printf ("INTEL ");		break;
+	default:		printf ("Unknown Vendor ");	break;
+	}
+
+	/* check for top or bottom boot, if it applies */
+	if (info->flash_id & FLASH_BTYPE) {
+		boottype = botboottype;
+		bootletter = botbootletter;
+	}
+	else {
+		boottype = topboottype;
+		bootletter = topbootletter;
+	}
+
+	switch (info->flash_id & FLASH_TYPEMASK) {
+	case FLASH_AM640U:
+		fmt = "29LV641D (64 Mbit, uniform sectors)\n";
+		break;
+        case FLASH_28F800C3B:
+        case FLASH_28F800C3T:
+		fmt = "28F800C3%s (8 Mbit, %s)\n";
+		break;
+	case FLASH_INTEL800B:
+	case FLASH_INTEL800T:
+		fmt = "28F800B3%s (8 Mbit, %s)\n";
+		break;
+        case FLASH_28F160C3B:
+        case FLASH_28F160C3T:
+		fmt = "28F160C3%s (16 Mbit, %s)\n";
+		break;
+	case FLASH_INTEL160B:
+	case FLASH_INTEL160T:
+		fmt = "28F160B3%s (16 Mbit, %s)\n";
+		break;
+        case FLASH_28F320C3B:
+        case FLASH_28F320C3T:
+		fmt = "28F320C3%s (32 Mbit, %s)\n";
+		break;
+	case FLASH_INTEL320B:
+	case FLASH_INTEL320T:
+		fmt = "28F320B3%s (32 Mbit, %s)\n";
+		break;
+        case FLASH_28F640C3B:
+        case FLASH_28F640C3T:
+		fmt = "28F640C3%s (64 Mbit, %s)\n";
+		break;
+	case FLASH_INTEL640B:
+	case FLASH_INTEL640T:
+		fmt = "28F640B3%s (64 Mbit, %s)\n";
+		break;
+	default:
+		fmt = "Unknown Chip Type\n";
+		break;
+	}
+
+	printf (fmt, bootletter, boottype);
+
+	printf ("  Size: %ld MB in %d Sectors\n",
+		info->size >> 20,
+		info->sector_count);
+
+	printf ("  Sector Start Addresses:");
+
+	for (i=0; i<info->sector_count; ++i) {
+		if ((i % 5) == 0) {
+			printf ("\n   ");
+		}
+
+		printf (" %08lX%s", info->start[i],
+			info->protect[i] ? " (RO)" : "     ");
+	}
+
+	printf ("\n");
+}
+
+/*-----------------------------------------------------------------------
+ */
+
+/*
+ * The following code cannot be run from FLASH!
+ */
+
+ulong flash_get_size (FPWV *addr, flash_info_t *info)
+{
+	/* Write auto select command: read Manufacturer ID */
+
+	/* Write auto select command sequence and test FLASH answer */
+	addr[FLASH_CYCLE1] = (FPW)0x00AA00AA;	/* for AMD, Intel ignores this */
+	addr[FLASH_CYCLE2] = (FPW)0x00550055;	/* for AMD, Intel ignores this */
+	addr[FLASH_CYCLE1] = (FPW)0x00900090;	/* selects Intel or AMD */
+
+	/* The manufacturer codes are only 1 byte, so just use 1 byte.
+	 * This works for any bus width and any FLASH device width.
+	 */
+	switch (addr[1] & 0xff) {
+
+	case (uchar)AMD_MANUFACT:
+		info->flash_id = FLASH_MAN_AMD;
+		break;
+
+	case (uchar)INTEL_MANUFACT:
+		info->flash_id = FLASH_MAN_INTEL;
+		break;
+
+	default:
+		info->flash_id = FLASH_UNKNOWN;
+		info->sector_count = 0;
+		info->size = 0;
+		break;
+	}
+
+	/* Check 16 bits or 32 bits of ID so work on 32 or 16 bit bus. */
+	if (info->flash_id != FLASH_UNKNOWN) switch (addr[0]) {
+
+	case (FPW)AMD_ID_LV640U:	/* 29LV640 and 29LV641 have same ID */
+		info->flash_id += FLASH_AM640U;
+		info->sector_count = 128;
+		info->size = 0x00800000 * (sizeof(FPW)/2);
+		break;				/* => 8 or 16 MB	*/
+
+	case (FPW)INTEL_ID_28F800C3B:
+		info->flash_id += FLASH_28F800C3B;
+		info->sector_count = 23;
+		info->size = 0x00100000 * (sizeof(FPW)/2);
+		break;				/* => 1 or 2 MB		*/
+
+	case (FPW)INTEL_ID_28F800B3B:
+		info->flash_id += FLASH_INTEL800B;
+		info->sector_count = 23;
+		info->size = 0x00100000 * (sizeof(FPW)/2);
+		break;				/* => 1 or 2 MB		*/
+
+	case (FPW)INTEL_ID_28F160C3B:
+		info->flash_id += FLASH_28F160C3B;
+		info->sector_count = 39;
+		info->size = 0x00200000 * (sizeof(FPW)/2);
+		break;				/* => 2 or 4 MB		*/
+
+	case (FPW)INTEL_ID_28F160B3B:
+		info->flash_id += FLASH_INTEL160B;
+		info->sector_count = 39;
+		info->size = 0x00200000 * (sizeof(FPW)/2);
+		break;				/* => 2 or 4 MB		*/
+
+	case (FPW)INTEL_ID_28F320C3B:
+		info->flash_id += FLASH_28F320C3B;
+		info->sector_count = 71;
+		info->size = 0x00400000 * (sizeof(FPW)/2);
+		break;				/* => 4 or 8 MB		*/
+
+	case (FPW)INTEL_ID_28F320B3B:
+		info->flash_id += FLASH_INTEL320B;
+		info->sector_count = 71;
+		info->size = 0x00400000 * (sizeof(FPW)/2);
+		break;				/* => 4 or 8 MB		*/
+
+	case (FPW)INTEL_ID_28F640C3B:
+		info->flash_id += FLASH_28F640C3B;
+		info->sector_count = 135;
+		info->size = 0x00800000 * (sizeof(FPW)/2);
+		break;				/* => 8 or 16 MB	*/
+
+	case (FPW)INTEL_ID_28F640B3B:
+		info->flash_id += FLASH_INTEL640B;
+		info->sector_count = 135;
+		info->size = 0x00800000 * (sizeof(FPW)/2);
+		break;				/* => 8 or 16 MB	*/
+
+	default:
+		info->flash_id = FLASH_UNKNOWN;
+		info->sector_count = 0;
+		info->size = 0;
+		return (0);			/* => no or unknown flash */
+	}
+
+	flash_get_offsets((ulong)addr, info);
+
+	/* Put FLASH back in read mode */
+	flash_reset(info);
+
+	return (info->size);
+}
+
+/*-----------------------------------------------------------------------
+ */
+
+int	flash_erase (flash_info_t *info, int s_first, int s_last)
+{
+	FPWV *addr;
+	int flag, prot, sect;
+	int intel = (info->flash_id & FLASH_VENDMASK) == FLASH_MAN_INTEL;
+	ulong start, now, last;
+	int rcode = 0;
+
+	if ((s_first < 0) || (s_first > s_last)) {
+		if (info->flash_id == FLASH_UNKNOWN) {
+			printf ("- missing\n");
+		} else {
+			printf ("- no sectors to erase\n");
+		}
+		return 1;
+	}
+
+	switch (info->flash_id & FLASH_TYPEMASK) {
+	case FLASH_INTEL800B:
+	case FLASH_INTEL160B:
+	case FLASH_INTEL320B:
+	case FLASH_INTEL640B:
+	case FLASH_28F800C3B:
+	case FLASH_28F160C3B:
+	case FLASH_28F320C3B:
+	case FLASH_28F640C3B:
+	case FLASH_AM640U:
+		break;
+	case FLASH_UNKNOWN:
+	default:
+		printf ("Can't erase unknown flash type %08lx - aborted\n",
+			info->flash_id);
+		return 1;
+	}
+
+	prot = 0;
+	for (sect=s_first; sect<=s_last; ++sect) {
+		if (info->protect[sect]) {
+			prot++;
+		}
+	}
+
+	if (prot) {
+		printf ("- Warning: %d protected sectors will not be erased!\n",
+			prot);
+	} else {
+		printf ("\n");
+	}
+
+	last  = get_timer(0);
+
+	/* Start erase on unprotected sectors */
+	for (sect = s_first; sect<=s_last && rcode == 0; sect++) {
+
+		if (info->protect[sect] != 0)	/* protected, skip it */
+			continue;
+
+		/* Disable interrupts which might cause a timeout here */
+		flag = disable_interrupts();
+
+		addr = (FPWV *)(info->start[sect]);
+		if (intel) {
+			*addr = (FPW)0x00500050; /* clear status register */
+			*addr = (FPW)0x00200020; /* erase setup */
+			*addr = (FPW)0x00D000D0; /* erase confirm */
+		}
+		else {
+			/* must be AMD style if not Intel */
+			FPWV *base;		/* first address in bank */
+
+			base = (FPWV *)(info->start[0]);
+			base[FLASH_CYCLE1] = (FPW)0x00AA00AA;	/* unlock */
+			base[FLASH_CYCLE2] = (FPW)0x00550055;	/* unlock */
+			base[FLASH_CYCLE1] = (FPW)0x00800080;	/* erase mode */
+			base[FLASH_CYCLE1] = (FPW)0x00AA00AA;	/* unlock */
+			base[FLASH_CYCLE2] = (FPW)0x00550055;	/* unlock */
+			*addr = (FPW)0x00300030;	/* erase sector */
+		}
+
+		/* re-enable interrupts if necessary */
+		if (flag)
+			enable_interrupts();
+
+		start = get_timer(0);
+
+		/* wait at least 50us for AMD, 80us for Intel.
+		 * Let's wait 1 ms.
+		 */
+		udelay (1000);
+
+		while ((*addr & (FPW)0x00800080) != (FPW)0x00800080) {
+			if ((now = get_timer(start)) > CFG_FLASH_ERASE_TOUT) {
+				printf ("Timeout\n");
+
+				if (intel) {
+					/* suspend erase	*/
+					*addr = (FPW)0x00B000B0;
+				}
+
+				flash_reset(info);	/* reset to read mode */
+				rcode = 1;		/* failed */
+				break;
+			}
+
+			/* show that we're waiting */
+			if ((get_timer(last)) > CFG_HZ) {/* every second */
+				putc ('.');
+				last = get_timer(0);
+			}
+		}
+
+		/* show that we're waiting */
+		if ((get_timer(last)) > CFG_HZ) {	/* every second */
+			putc ('.');
+			last = get_timer(0);
+		}
+
+		flash_reset(info);	/* reset to read mode	*/
+	}
+
+	printf (" done\n");
+	return rcode;
+}
+
+/*-----------------------------------------------------------------------
+ * Copy memory to flash, returns:
+ * 0 - OK
+ * 1 - write timeout
+ * 2 - Flash not erased
+ */
+int write_buff (flash_info_t *info, uchar *src, ulong addr, ulong cnt)
+{
+    FPW data = 0; /* 16 or 32 bit word, matches flash bus width on MPC8XX */
+    int bytes;	  /* number of bytes to program in current word		*/
+    int left;	  /* number of bytes left to program			*/
+    int i, res;
+
+    for (left = cnt, res = 0;
+	 left > 0 && res == 0;
+	 addr += sizeof(data), left -= sizeof(data) - bytes) {
+
+        bytes = addr & (sizeof(data) - 1);
+        addr &= ~(sizeof(data) - 1);
+
+	/* combine source and destination data so can program
+	 * an entire word of 16 or 32 bits
+	 */
+        for (i = 0; i < sizeof(data); i++) {
+            data <<= 8;
+            if (i < bytes || i - bytes >= left )
+		data += *((uchar *)addr + i);
+	    else
+		data += *src++;
+	}
+
+	/* write one word to the flash */
+	switch (info->flash_id & FLASH_VENDMASK) {
+	case FLASH_MAN_AMD:
+		res = write_word_amd(info, (FPWV *)addr, data);
+		break;
+	case FLASH_MAN_INTEL:
+		res = write_word_intel(info, (FPWV *)addr, data);
+		break;
+	default:
+		/* unknown flash type, error! */
+		printf ("missing or unknown FLASH type\n");
+		res = 1;	/* not really a timeout, but gives error */
+		break;
+	}
+    }
+
+    return (res);
+}
+
+/*-----------------------------------------------------------------------
+ * Write a word to Flash for AMD FLASH
+ * A word is 16 or 32 bits, whichever the bus width of the flash bank
+ * (not an individual chip) is.
+ *
+ * returns:
+ * 0 - OK
+ * 1 - write timeout
+ * 2 - Flash not erased
+ */
+static int write_word_amd (flash_info_t *info, FPWV *dest, FPW data)
+{
+    ulong start;
+    int flag;
+    int res = 0;	/* result, assume success	*/
+    FPWV *base;		/* first address in flash bank	*/
+
+    /* Check if Flash is (sufficiently) erased */
+    if ((*dest & data) != data) {
+	return (2);
+    }
+
+
+    base = (FPWV *)(info->start[0]);
+
+    /* Disable interrupts which might cause a timeout here */
+    flag = disable_interrupts();
+
+    base[FLASH_CYCLE1] = (FPW)0x00AA00AA;	/* unlock */
+    base[FLASH_CYCLE2] = (FPW)0x00550055;	/* unlock */
+    base[FLASH_CYCLE1] = (FPW)0x00A000A0;	/* selects program mode */
+
+    *dest = data;		/* start programming the data	*/
+
+    /* re-enable interrupts if necessary */
+    if (flag)
+	enable_interrupts();
+
+    start = get_timer (0);
+
+    /* data polling for D7 */
+    while (res == 0 && (*dest & (FPW)0x00800080) != (data & (FPW)0x00800080)) {
+	if (get_timer(start) > CFG_FLASH_WRITE_TOUT) {
+	    *dest = (FPW)0x00F000F0;	/* reset bank */
+	    res = 1;
+	}
+    }
+
+    return (res);
+}
+
+/*-----------------------------------------------------------------------
+ * Write a word to Flash for Intel FLASH
+ * A word is 16 or 32 bits, whichever the bus width of the flash bank
+ * (not an individual chip) is.
+ *
+ * returns:
+ * 0 - OK
+ * 1 - write timeout
+ * 2 - Flash not erased
+ */
+static int write_word_intel (flash_info_t *info, FPWV *dest, FPW data)
+{
+    ulong start;
+    int flag;
+    int res = 0;	/* result, assume success	*/
+
+    /* Check if Flash is (sufficiently) erased */
+    if ((*dest & data) != data) {
+	return (2);
+    }
+
+    /* Disable interrupts which might cause a timeout here */
+    flag = disable_interrupts();
+
+    *dest = (FPW)0x00500050;	/* clear status register	*/
+    *dest = (FPW)0x00FF00FF;	/* make sure in read mode	*/
+    *dest = (FPW)0x00400040;	/* program setup		*/
+
+    *dest = data;		/* start programming the data	*/
+
+    /* re-enable interrupts if necessary */
+    if (flag)
+	enable_interrupts();
+
+    start = get_timer (0);
+
+    while (res == 0 && (*dest & (FPW)0x00800080) != (FPW)0x00800080) {
+	if (get_timer(start) > CFG_FLASH_WRITE_TOUT) {
+	    *dest = (FPW)0x00B000B0;	/* Suspend program	*/
+	    res = 1;
+	}
+    }
+
+    if (res == 0 && (*dest & (FPW)0x00100010))
+	res = 1;	/* write failed, time out error is close enough	*/
+
+    *dest = (FPW)0x00500050;	/* clear status register	*/
+    *dest = (FPW)0x00FF00FF;	/* make sure in read mode	*/
+
+    return (res);
+}
diff --git a/board/incaip/incaip.c b/board/incaip/incaip.c
new file mode 100644
index 0000000000..72f1c21512
--- /dev/null
+++ b/board/incaip/incaip.c
@@ -0,0 +1,129 @@
+/*
+ * (C) Copyright 2003
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <command.h>
+#include <asm/addrspace.h>
+#include <asm/inca-ip.h>
+
+
+static ulong max_sdram_size(void)
+{
+	/* The only supported SDRAM data width is 16bit.
+	 */
+#define CFG_DW	2
+
+	/* The only supported number of SDRAM banks is 4.
+	 */
+#define CFG_NB	4
+
+	ulong cfgpb0 = *INCA_IP_SDRAM_MC_CFGPB0;
+	int   cols   = cfgpb0 & 0xF;
+	int   rows   = (cfgpb0 & 0xF0) >> 4;
+	ulong size   = (1 << (rows + cols)) * CFG_DW * CFG_NB;
+
+	return size;
+}
+
+/*
+ * Check memory range for valid RAM. A simple memory test determines
+ * the actually available RAM size between addresses `base' and
+ * `base + maxsize'. Some (not all) hardware errors are detected:
+ * - short between address lines
+ * - short between data lines
+ */
+
+static long int dram_size(long int *base, long int maxsize)
+{
+	volatile long int *addr;
+	ulong cnt, val;
+	ulong save[32];			/* to make test non-destructive */
+	unsigned char i = 0;
+
+	for (cnt = (maxsize / sizeof (long)) >> 1; cnt > 0; cnt >>= 1) {
+		addr = base + cnt;		/* pointer arith! */
+
+		save[i++] = *addr;
+		*addr = ~cnt;
+	}
+
+	/* write 0 to base address */
+	addr = base;
+	save[i] = *addr;
+	*addr = 0;
+
+	/* check at base address */
+	if ((val = *addr) != 0) {
+		*addr = save[i];
+		return (0);
+	}
+
+	for (cnt = 1; cnt < maxsize / sizeof (long); cnt <<= 1) {
+		addr = base + cnt;		/* pointer arith! */
+
+		val = *addr;
+		*addr = save[--i];
+
+		if (val != (~cnt)) {
+			return (cnt * sizeof (long));
+		}
+	}
+	return (maxsize);
+}
+
+long int initdram(int board_type)
+{
+	int   rows, cols, best_val = *INCA_IP_SDRAM_MC_CFGPB0;
+	ulong size, max_size       = 0;
+	ulong our_address;
+
+	asm volatile ("move %0, $25" : "=r" (our_address) :);
+
+		/* Can't probe for RAM size unless we are running from Flash.
+		 */
+	if (PHYSADDR(our_address) < PHYSADDR(PHYS_FLASH_1))
+	{
+		return max_sdram_size();
+	}
+
+	for (cols = 0x8; cols <= 0xC; cols++)
+	{
+		for (rows = 0xB; rows <= 0xD; rows++)
+		{
+			*INCA_IP_SDRAM_MC_CFGPB0 = (0x14 << 8) |
+			                           (rows << 4) | cols;
+			size = dram_size((ulong *)CFG_SDRAM_BASE,
+			                                     max_sdram_size());
+
+			if (size > max_size)
+			{
+				best_val = *INCA_IP_SDRAM_MC_CFGPB0;
+				max_size = size;
+			}
+		}
+	}
+
+	*INCA_IP_SDRAM_MC_CFGPB0 = best_val;
+	return max_size;
+}
+
diff --git a/board/incaip/memsetup.S b/board/incaip/memsetup.S
new file mode 100644
index 0000000000..4faf627f07
--- /dev/null
+++ b/board/incaip/memsetup.S
@@ -0,0 +1,151 @@
+/*
+ *  Memory sub-system initialization code for INCA-IP development board.
+ *
+ *  Copyright (c) 2003	Wolfgang Denk <wd@denx.de>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <config.h>
+#include <version.h>
+#include <asm/regdef.h>
+
+
+#define EBU_MODUL_BASE          0xB8000200
+#define EBU_CLC(value)          0x0000(value)
+#define EBU_CON(value)          0x0010(value)
+#define EBU_ADDSEL0(value)      0x0020(value)
+#define EBU_ADDSEL1(value)      0x0024(value)
+#define EBU_ADDSEL2(value)      0x0028(value)
+#define EBU_BUSCON0(value)      0x0060(value)
+#define EBU_BUSCON1(value)      0x0064(value)
+#define EBU_BUSCON2(value)      0x0068(value)
+
+#define MC_MODUL_BASE           0xBF800000
+#define MC_ERRCAUSE(value)      0x0100(value)
+#define MC_ERRADDR(value)       0x0108(value)
+#define MC_IOGP(value)          0x0800(value)
+#define MC_SELFRFSH(value)      0x0A00(value)
+#define MC_CTRLENA(value)       0x1000(value)
+#define MC_MRSCODE(value)       0x1008(value)
+#define MC_CFGDW(value)         0x1010(value)
+#define MC_CFGPB0(value)        0x1018(value)
+#define MC_LATENCY(value)       0x1038(value)
+#define MC_TREFRESH(value)      0x1040(value)
+
+#if CPU_CLOCK_RATE==150000000   /* 150 MHz clock for the MIPS core */
+#define CGU_MODUL_BASE          0xBF107000
+#define CGU_PLL1CR(value)       0x0008(value)
+#define CGU_DIVCR(value)        0x0010(value)
+#define CGU_MUXCR(value)        0x0014(value)
+#define CGU_PLL1SR(value)       0x000C(value)
+#endif
+
+	.globl	memsetup
+memsetup:
+
+	/* EBU Initialization for the Flash CS0 and CS2.
+	 */
+	li	t0, EBU_MODUL_BASE
+
+	li	t1, 0xA0000041
+	sw	t1, EBU_ADDSEL0(t0)
+
+#if CPU_CLOCK_RATE==150000000   /* 150 MHz clock for the MIPS core */
+	li	t1, 0xE841417E
+	sw	t1, EBU_BUSCON0(t0)   /* value set up by magic flash word */
+	sw	t1, EBU_BUSCON2(t0)
+#else /* 100 MHz */
+	lw	t1, EBU_BUSCON0(t0)   /* value set up by magic flash word */
+	sw	t1, EBU_BUSCON2(t0)
+#endif
+
+	li	t1, 0xA0800041
+	sw	t1, EBU_ADDSEL2(t0)
+
+	/* Need to initialize CS1 too, so as to to prevent overlapping with
+	 * Flash bank 1.
+	 */
+	li	t1, 0xBE0000F1
+ 	sw	t1, EBU_ADDSEL1(t0)
+
+#if CPU_CLOCK_RATE==150000000   /* 150 MHz clock for the MIPS core */
+	li	t1, 0x684143FD
+#else /* 100 MHz */
+	li	t1, 0x684142BD
+#endif
+ 	sw	t1, EBU_BUSCON1(t0)
+
+#if CPU_CLOCK_RATE==150000000   /* 150 MHz clock for the MIPS core */
+	li      t0, CGU_MODUL_BASE
+	li      t1, 0x80000017
+	sw      t1, CGU_DIVCR(t0)
+	li      t1, 0xC00B0001
+	sw      t1, CGU_PLL1CR(t0)
+	lui     t2, 0x8000
+b1:
+	lw      t1, CGU_PLL1SR(t0)
+	and     t1, t1, t2
+	beq     t1, zero, b1
+	li      t1, 0x80000001
+	sw      t1, CGU_MUXCR(t0)
+#endif
+
+	/* SDRAM Initialization.
+	 */
+	li	t0, MC_MODUL_BASE
+
+	/* Clear Error log registers */
+	sw	zero, MC_ERRCAUSE(t0)
+	sw	zero, MC_ERRADDR(t0)
+
+	/* Set clock ratio to 1:1 */
+	li	t1, 0x03		/* clkrat=1:1, rddel=3 */
+	sw	t1, MC_IOGP(t0)
+
+	/* Clear Power-down registers */
+	sw	zero, MC_SELFRFSH(t0)
+
+	/* Set CAS Latency */
+	li	t1, 0x00000020		/* CL = 2 */
+	sw	t1, MC_MRSCODE(t0)
+
+	/* Set word width to 16 bit */
+	li	t1, 0x2  
+	sw	t1, MC_CFGDW(t0)
+
+	/* Set CS0 to SDRAM parameters */
+	li	t1, 0x000014C9
+	sw	t1, MC_CFGPB0(t0)
+
+	/* Set SDRAM latency parameters */
+	li	t1, 0x00026325		/* BC PC100 */
+	sw	t1, MC_LATENCY(t0)
+
+	/* Set SDRAM refresh rate */
+	li	t1, 0x00000C30		/* 4K/64ms @ 100MHz */
+	sw	t1, MC_TREFRESH(t0)
+
+	/* Finally enable the controller */
+	li	t1, 1
+	sw	t1, MC_CTRLENA(t0)
+
+	j	ra
+	nop
+
diff --git a/board/incaip/u-boot.lds b/board/incaip/u-boot.lds
new file mode 100644
index 0000000000..3c9ca89061
--- /dev/null
+++ b/board/incaip/u-boot.lds
@@ -0,0 +1,64 @@
+/*
+ * (C) Copyright 2003
+ * Wolfgang Denk Engineering, <wd@denx.de>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*
+OUTPUT_FORMAT("elf32-bigmips", "elf32-bigmips", "elf32-bigmips")
+*/
+OUTPUT_FORMAT("elf32-tradbigmips", "elf32-tradbigmips", "elf32-tradbigmips")
+OUTPUT_ARCH(mips)
+ENTRY(_start)
+SECTIONS
+{
+        . = 0x00000000;
+
+        . = ALIGN(4);
+	.text       :
+	{
+	  *(.text)
+	}
+
+        . = ALIGN(4);
+        .rodata  : { *(.rodata) }
+
+        . = ALIGN(4);
+        .data  : { *(.data) }
+
+	. = ALIGN(4);
+	.sdata  : { *(.sdata) }
+
+	_gp = ALIGN(16);
+
+	__got_start = .;
+	.got  : { *(.got) }
+	__got_end = .;
+
+	.sdata  : { *(.sdata) }
+
+	uboot_end_data = .;
+	num_got_entries = (__got_end - __got_start) >> 2;
+
+        . = ALIGN(4);
+	.sbss  : { *(.sbss) }
+        .bss  : { *(.bss) }
+	uboot_end = .;
+}
diff --git a/cpu/mips/Makefile b/cpu/mips/Makefile
new file mode 100644
index 0000000000..91008bfe1b
--- /dev/null
+++ b/cpu/mips/Makefile
@@ -0,0 +1,44 @@
+#
+# (C) Copyright 2003
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB	= lib$(CPU).a
+
+START	= start.o
+OBJS	= interrupts.o cpu.o incaip_clock.o serial.o
+SOBJS	= incaip_wdt.o cache.o
+
+all:	.depend $(START) $(LIB)
+
+$(LIB):	$(OBJS) $(SOBJS)
+	$(AR) crv $@ $(OBJS) $(SOBJS)
+
+#########################################################################
+
+.depend:	Makefile $(START:.o=.S) $(OBJS:.o=.c)
+		$(CC) -M $(CFLAGS) $(START:.o=.S) $(OBJS:.o=.c) > $@
+
+sinclude .depend
+
+#########################################################################
diff --git a/cpu/mips/cache.S b/cpu/mips/cache.S
new file mode 100644
index 0000000000..aeb04b3790
--- /dev/null
+++ b/cpu/mips/cache.S
@@ -0,0 +1,265 @@
+/*
+ *  Cache-handling routined for MIPS 4K CPUs
+ *
+ *  Copyright (c) 2003	Wolfgang Denk <wd@denx.de>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+
+#include <config.h>
+#include <version.h>
+#include <asm/regdef.h>
+#include <asm/mipsregs.h>
+#include <asm/addrspace.h>
+#include <asm/cacheops.h>
+
+
+	/* 16KB is the maximum size of instruction and data caches on
+	 * MIPS 4K.
+	 */
+#define MIPS_MAX_CACHE_SIZE	0x4000
+
+
+/*
+ * cacheop macro to automate cache operations
+ * first some helpers...
+ */
+#define _mincache(size, maxsize) \
+   bltu  size,maxsize,9f ; \
+   move  size,maxsize ;    \
+9:
+
+#define _align(minaddr, maxaddr, linesize) \
+   .set noat ; \
+   subu  AT,linesize,1 ;   \
+   not   AT ;        \
+   and   minaddr,AT ;      \
+   addu  maxaddr,-1 ;      \
+   and   maxaddr,AT ;      \
+   .set at
+
+/* general operations */
+#define doop1(op1) \
+   cache op1,0(a0)
+#define doop2(op1, op2) \
+   cache op1,0(a0) ;    \
+   nop ;          \
+   cache op2,0(a0)
+
+/* specials for cache initialisation */
+#define doop1lw(op1) \
+   lw zero,0(a0)
+#define doop1lw1(op1) \
+   cache op1,0(a0) ;    \
+   lw zero,0(a0) ;      \
+   cache op1,0(a0)
+#define doop121(op1,op2) \
+   cache op1,0(a0) ;    \
+   nop;           \
+   cache op2,0(a0) ;    \
+   nop;           \
+   cache op1,0(a0)
+
+#define _oploopn(minaddr, maxaddr, linesize, tag, ops) \
+   .set  noreorder ;    \
+10:   doop##tag##ops ;  \
+   bne     minaddr,maxaddr,10b ; \
+   add      minaddr,linesize ;   \
+   .set  reorder
+
+/* finally the cache operation macros */
+#define vcacheopn(kva, n, cacheSize, cacheLineSize, tag, ops) \
+   blez  n,11f ;        \
+   addu  n,kva ;        \
+   _align(kva, n, cacheLineSize) ; \
+   _oploopn(kva, n, cacheLineSize, tag, ops) ; \
+11:
+
+#define icacheopn(kva, n, cacheSize, cacheLineSize, tag, ops) \
+   _mincache(n, cacheSize);   \
+   blez  n,11f ;        \
+   addu  n,kva ;        \
+   _align(kva, n, cacheLineSize) ; \
+   _oploopn(kva, n, cacheLineSize, tag, ops) ; \
+11:
+
+#define vcacheop(kva, n, cacheSize, cacheLineSize, op) \
+   vcacheopn(kva, n, cacheSize, cacheLineSize, 1, (op))
+
+#define icacheop(kva, n, cacheSize, cacheLineSize, op) \
+   icacheopn(kva, n, cacheSize, cacheLineSize, 1, (op))
+
+/*******************************************************************************
+*
+* mips_cache_reset - low level initialisation of the primary caches
+*
+* This routine initialises the primary caches to ensure that they
+* have good parity.  It must be called by the ROM before any cached locations
+* are used to prevent the possibility of data with bad parity being written to
+* memory.
+* To initialise the instruction cache it is essential that a source of data
+* with good parity is available. This routine
+* will initialise an area of memory starting at location zero to be used as
+* a source of parity.
+*
+* RETURNS: N/A
+*
+*/
+	.globl	mips_cache_reset
+	.ent	mips_cache_reset
+mips_cache_reset:
+
+	li	t2, CFG_ICACHE_SIZE
+	li	t3, CFG_DCACHE_SIZE
+	li	t4, CFG_CACHELINE_SIZE
+	move	t5, t4
+
+
+	li	v0, MIPS_MAX_CACHE_SIZE
+
+	/* Now clear that much memory starting from zero.
+	 */
+
+	li	a0, KSEG1
+	addu	a1, a0, v0
+
+2:	sw	zero, 0(a0)
+	sw	zero, 4(a0)
+	sw	zero, 8(a0)
+	sw	zero, 12(a0)
+	sw	zero, 16(a0)
+	sw	zero, 20(a0)
+	sw	zero, 24(a0)
+	sw	zero, 28(a0)
+	addu	a0, 32
+	bltu	a0, a1, 2b
+   
+	/* Set invalid tag.
+	 */
+
+	mtc0	zero, CP0_TAGLO
+
+   /*
+    * The caches are probably in an indeterminate state,
+    * so we force good parity into them by doing an
+    * invalidate, load/fill, invalidate for each line.
+    */
+
+	/* Assume bottom of RAM will generate good parity for the cache.
+	 */
+
+	li	a0, K0BASE
+	move	a2, t2		# icacheSize
+	move	a3, t4		# icacheLineSize
+	move	a1, a2
+	icacheopn(a0,a1,a2,a3,121,(Index_Store_Tag_I,Fill))
+
+	/* To support Orion/R4600, we initialise the data cache in 3 passes.
+	 */
+
+	/* 1: initialise dcache tags.
+	 */
+
+	li	a0, K0BASE
+	move	a2, t3		# dcacheSize
+	move	a3, t5		# dcacheLineSize
+	move	a1, a2
+	icacheop(a0,a1,a2,a3,Index_Store_Tag_D)
+
+	/* 2: fill dcache.
+	 */
+
+	li	a0, K0BASE
+	move	a2, t3		# dcacheSize
+	move	a3, t5		# dcacheLineSize
+	move	a1, a2
+	icacheopn(a0,a1,a2,a3,1lw,(dummy))
+
+	/* 3: clear dcache tags.
+	 */
+
+	li	a0, K0BASE
+	move	a2, t3		# dcacheSize
+	move	a3, t5		# dcacheLineSize
+	move	a1, a2
+	icacheop(a0,a1,a2,a3,Index_Store_Tag_D)
+
+	j  ra
+	.end  mips_cache_reset
+
+
+/*******************************************************************************
+*
+* dcache_status - get cache status
+*
+* RETURNS: 0 - cache disabled; 1 - cache enabled
+*
+*/
+	.globl	dcache_status
+	.ent	dcache_status
+dcache_status:
+
+	mfc0	v0, CP0_CONFIG
+	andi	v0, v0, 1
+	j	ra
+
+	.end  dcache_status
+
+/*******************************************************************************
+*
+* dcache_disable - disable cache
+*
+* RETURNS: N/A
+*
+*/
+	.globl	dcache_disable
+	.ent	dcache_disable
+dcache_disable:
+
+	mfc0	t0, CP0_CONFIG
+	li	t1, -8
+	and	t0, t0, t1
+	ori	t0, t0, CONF_CM_UNCACHED
+	mtc0    t0, CP0_CONFIG
+	j	ra
+
+	.end  dcache_disable
+
+
+/*******************************************************************************
+*
+* mips_cache_lock - lock RAM area pointed to by a0 in cache.
+*
+* RETURNS: N/A
+*
+*/
+	.globl	mips_cache_lock
+	.ent	mips_cache_lock
+mips_cache_lock:
+	li	a1, K0BASE - CFG_DCACHE_SIZE
+	addu	a0, a1
+	li	a2, CFG_DCACHE_SIZE
+	li	a3, CFG_CACHELINE_SIZE
+	move	a1, a2
+	icacheop(a0,a1,a2,a3,0x1d)
+
+	j	ra
+	.end	mips_cache_lock
+
diff --git a/cpu/mips/config.mk b/cpu/mips/config.mk
new file mode 100644
index 0000000000..4ea66172d1
--- /dev/null
+++ b/cpu/mips/config.mk
@@ -0,0 +1,25 @@
+#
+# (C) Copyright 2003
+# Wolfgang Denk, DENX Software Engineering, <wd@denx.de>
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+PLATFORM_CPPFLAGS += -mcpu=4kc -EB -mabicalls
+
diff --git a/cpu/mips/cpu.c b/cpu/mips/cpu.c
new file mode 100644
index 0000000000..3fc3916b4e
--- /dev/null
+++ b/cpu/mips/cpu.c
@@ -0,0 +1,41 @@
+/*
+ * (C) Copyright 2003
+ * Wolfgang Denk, DENX Software Engineering, <wd@denx.de>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <command.h>
+#include <asm/inca-ip.h>
+
+int do_reset(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
+{
+#ifdef CONFIG_INCA_IP
+	*INCA_IP_WDT_RST_REQ = 0x3f;
+#endif
+	fprintf(stderr, "*** reset failed ***\n");
+	return 0;
+}
+
+void flush_cache (ulong start_addr, ulong size)
+{
+
+}
+
diff --git a/cpu/mips/incaip_clock.c b/cpu/mips/incaip_clock.c
new file mode 100644
index 0000000000..7fc6eb0351
--- /dev/null
+++ b/cpu/mips/incaip_clock.c
@@ -0,0 +1,107 @@
+/*
+ * (C) Copyright 2003
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/inca-ip.h>
+
+
+
+/*******************************************************************************
+*
+* get_cpuclk - returns the frequency of the CPU. 
+*
+* Gets the value directly from the INCA-IP hardware.
+*
+* RETURNS: 
+*          150.000.000 for 150 MHz
+*          130.000.000. for 130 Mhz
+*          100.000.000. for 100 Mhz
+* NOTE:
+*   This functions should be used by the hardware driver to get the correct
+*   frequency of the CPU. Don't use the macros, which are set to init the CPU
+*   frequency in the ROM code.
+*/
+uint incaip_get_cpuclk(void)
+{
+   /*-------------------------------------------------------------------------*/
+   /* CPU Clock Input Multiplexer (MUX I)                                     */
+   /* Multiplexer MUX I selects the maximum input clock to the CPU.           */
+   /*-------------------------------------------------------------------------*/
+   if (*((volatile ulong*)INCA_IP_CGU_CGU_MUXCR) & INCA_IP_CGU_CGU_MUXCR_MUXI)
+   {
+      /* MUX I set to 150 MHz clock */
+      return 150000000;
+   }
+   else
+   {
+      /* MUX I set to 100/133 MHz clock */
+      if (*((volatile ulong*)INCA_IP_CGU_CGU_DIVCR) & 0x40) 
+      {
+         /* Division value is 1/3, maximum CPU operating */
+         /* frequency is 133.3 MHz                       */
+         return 130000000;
+      }
+      else
+      {
+         /* Division value is 1/4, maximum CPU operating */
+         /* frequency is 100 MHz                         */
+         return 100000000;
+      }
+   }
+}
+
+/*******************************************************************************
+*
+* get_fpiclk - returns the frequency of the FPI bus. 
+*
+* Gets the value directly from the INCA-IP hardware.
+*
+* RETURNS: Frquency in Hz
+*
+* NOTE:
+*   This functions should be used by the hardware driver to get the correct
+*   frequency of the CPU. Don't use the macros, which are set to init the CPU
+*   frequency in the ROM code.
+*   The calculation for the 
+*/
+uint incaip_get_fpiclk(void)
+{
+   uint  clkCPU;
+   
+   clkCPU = incaip_get_cpuclk();
+   
+   switch (*((volatile ulong*)INCA_IP_CGU_CGU_DIVCR) & 0xC)
+   {
+      case 0x4:
+         return clkCPU >> 1; /* devided by 2 */
+         break;
+      case 0x8:
+         return clkCPU >> 2; /* devided by 4 */
+         break;
+      default:
+         return clkCPU;
+         break;
+   }
+}
+
+
diff --git a/cpu/mips/incaip_wdt.S b/cpu/mips/incaip_wdt.S
new file mode 100644
index 0000000000..9455569f52
--- /dev/null
+++ b/cpu/mips/incaip_wdt.S
@@ -0,0 +1,73 @@
+/*
+ *  INCA-IP Watchdog timer management code.
+ *
+ *  Copyright (c) 2003	Wolfgang Denk <wd@denx.de>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+
+#include <config.h>
+#include <version.h>
+#include <asm/regdef.h>
+
+
+#define WD_BASE            0xb8000000
+#define WD_CON0(value)     0x0020(value)
+#define WD_CON1(value)     0x0024(value)
+#define WD_DISABLE         0x00000008
+#define WD_ENABLE          0x00000000
+#define WD_WRITE_PW        0xFFFC00F8
+#define WD_WRITE_ENDINIT   0xFFFC00F3
+#define WD_WRITE_INIT      0xFFFC00F2
+
+
+	.globl	disable_incaip_wdt
+disable_incaip_wdt:
+	li	t0, WD_BASE
+
+	/* Calculate password.
+	 */
+	lw	t2, WD_CON1(t0)
+	and	t2, 0xC
+
+	lw	t3, WD_CON0(t0)
+	and	t3, 0xFFFFFF01
+
+	or	t3, t2
+	or 	t3, 0xF0
+
+	sw	t3, WD_CON0(t0)		/* write password */
+
+	/* Clear ENDINIT.
+	 */
+	li	t1, WD_WRITE_INIT
+	sw	t1, WD_CON0(t0)
+
+
+	li	t1, WD_DISABLE
+	sw	t1, WD_CON1(t0)		/* disable watchdog */
+	li	t1, WD_WRITE_PW
+	sw	t1, WD_CON0(t0)		/* write password */
+	li	t1, WD_WRITE_ENDINIT
+	sw	t1, WD_CON0(t0)		/* end command */
+
+	j	ra
+	nop
+
diff --git a/cpu/mips/interrupts.c b/cpu/mips/interrupts.c
new file mode 100644
index 0000000000..0490a7661a
--- /dev/null
+++ b/cpu/mips/interrupts.c
@@ -0,0 +1,34 @@
+/*
+ * (C) Copyright 2003
+ * Wolfgang Denk, DENX Software Engineering, <wd@denx.de>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+
+void enable_interrupts(void)
+{
+}
+
+int disable_interrupts(void)
+{
+	return 0;
+}
+
diff --git a/cpu/mips/serial.c b/cpu/mips/serial.c
new file mode 100644
index 0000000000..ebda509b11
--- /dev/null
+++ b/cpu/mips/serial.c
@@ -0,0 +1,282 @@
+/*
+ * (INCA) ASC UART support
+ */
+
+#include <common.h>
+#include <asm/inca-ip.h>
+#include "serial.h"
+
+#define SET_BIT(reg, mask)                  reg |= (mask)
+#define CLEAR_BIT(reg, mask)                reg &= (~mask)
+#define CLEAR_BITS(reg, mask)               CLEAR_BIT(reg, mask)
+#define SET_BITS(reg, mask)                 SET_BIT(reg, mask)
+#define SET_BITFIELD(reg, mask, off, val)   {reg &= (~mask); reg |= (val << off);}
+
+extern uint incaip_get_fpiclk(void);
+
+static int serial_setopt (void);
+
+/* pointer to ASC register base address */
+static volatile incaAsc_t *pAsc = (incaAsc_t *)INCA_IP_ASC;
+
+/******************************************************************************
+*
+* serial_init - initialize a INCAASC channel
+*
+* This routine initializes the number of data bits, parity
+* and set the selected baud rate. Interrupts are disabled.
+* Set the modem control signals if the option is selected.
+*
+* RETURNS: N/A
+*/
+
+int serial_init (void)
+{
+    /* we have to set PMU.EN13 bit to enable an ASC device*/
+    INCAASC_PMU_ENABLE(13);
+    
+    /* and we have to set CLC register*/
+    CLEAR_BIT(pAsc->asc_clc, ASCCLC_DISS);
+    SET_BITFIELD(pAsc->asc_clc, ASCCLC_RMCMASK, ASCCLC_RMCOFFSET, 0x0001);
+    
+    /* initialy we are in async mode */
+    pAsc->asc_con = ASCCON_M_8ASYNC;
+
+    /* select input port */
+    pAsc->asc_pisel = (CONSOLE_TTY & 0x1);
+
+    /* TXFIFO's filling level */
+    SET_BITFIELD(pAsc->asc_txfcon, ASCTXFCON_TXFITLMASK,
+                    ASCTXFCON_TXFITLOFF, INCAASC_TXFIFO_FL);
+    /* enable TXFIFO */
+    SET_BIT(pAsc->asc_txfcon, ASCTXFCON_TXFEN);
+
+    /* RXFIFO's filling level */
+    SET_BITFIELD(pAsc->asc_txfcon, ASCRXFCON_RXFITLMASK, 
+                    ASCRXFCON_RXFITLOFF, INCAASC_RXFIFO_FL);
+    /* enable RXFIFO */
+    SET_BIT(pAsc->asc_rxfcon, ASCRXFCON_RXFEN);
+
+    /* enable error signals */
+    SET_BIT(pAsc->asc_con, ASCCON_FEN);
+    SET_BIT(pAsc->asc_con, ASCCON_OEN);
+
+    /* acknowledge ASC interrupts */
+    ASC_INTERRUPTS_CLEAR(INCAASC_IRQ_LINE_ALL);
+
+    /* disable ASC interrupts */
+    ASC_INTERRUPTS_DISABLE(INCAASC_IRQ_LINE_ALL);
+
+    /* set FIFOs into the transparent mode */
+    SET_BIT(pAsc->asc_txfcon, ASCTXFCON_TXTMEN);
+    SET_BIT(pAsc->asc_rxfcon, ASCRXFCON_RXTMEN);
+
+    /* set baud rate */
+    serial_setbrg();
+
+    /* set the options */
+    serial_setopt();
+    
+    return 0;
+}
+
+void serial_setbrg (void)
+{
+    ulong      uiReloadValue, fdv;
+    ulong      f_ASC;
+
+    f_ASC = incaip_get_fpiclk();
+
+#ifndef INCAASC_USE_FDV
+    fdv = 2;
+    uiReloadValue = (f_ASC / (fdv * 16 * CONFIG_BAUDRATE)) - 1;
+#else 
+    fdv = INCAASC_FDV_HIGH_BAUDRATE;
+    uiReloadValue = (f_ASC / (8192 * CONFIG_BAUDRATE / fdv)) - 1;
+#endif /* INCAASC_USE_FDV */
+    
+    if ( (uiReloadValue < 0) || (uiReloadValue > 8191) )
+    {
+#ifndef INCAASC_USE_FDV
+        fdv = 3;
+        uiReloadValue = (f_ASC / (fdv * 16 * CONFIG_BAUDRATE)) - 1;
+#else 
+        fdv = INCAASC_FDV_LOW_BAUDRATE;
+        uiReloadValue = (f_ASC / (8192 * CONFIG_BAUDRATE / fdv)) - 1;
+#endif /* INCAASC_USE_FDV */
+        
+        if ( (uiReloadValue < 0) || (uiReloadValue > 8191) )
+        {
+            return;    /* can't impossibly generate that baud rate */
+        }
+    }
+
+    /* Disable Baud Rate Generator; BG should only be written when R=0 */
+    CLEAR_BIT(pAsc->asc_con, ASCCON_R);
+
+#ifndef INCAASC_USE_FDV
+    /*
+     * Disable Fractional Divider (FDE)
+     * Divide clock by reload-value + constant (BRS)
+     */
+    /* FDE = 0 */
+    CLEAR_BIT(pAsc->asc_con, ASCCON_FDE);
+
+    if ( fdv == 2 )
+        CLEAR_BIT(pAsc->asc_con, ASCCON_BRS);   /* BRS = 0 */
+    else
+        SET_BIT(pAsc->asc_con, ASCCON_BRS); /* BRS = 1 */
+
+#else /* INCAASC_USE_FDV */
+
+    /* Enable Fractional Divider */
+    SET_BIT(pAsc->asc_con, ASCCON_FDE); /* FDE = 1 */
+
+    /* Set fractional divider value */
+    pAsc->asc_fdv = fdv & ASCFDV_VALUE_MASK;
+
+#endif /* INCAASC_USE_FDV */
+
+    /* Set reload value in BG */
+    pAsc->asc_bg = uiReloadValue;
+
+    /* Enable Baud Rate Generator */
+    SET_BIT(pAsc->asc_con, ASCCON_R);           /* R = 1 */
+}
+
+/*******************************************************************************
+*
+* serial_setopt - set the serial options
+*
+* Set the channel operating mode to that specified. Following options
+* are supported: CREAD, CSIZE, PARENB, and PARODD.
+*
+* Note, this routine disables the transmitter.  The calling routine
+* may have to re-enable it.
+*
+* RETURNS:
+* Returns 0 to indicate success, otherwise -1 is returned
+*/
+
+static int serial_setopt (void)
+{
+    ulong  con;
+
+    switch ( ASC_OPTIONS & ASCOPT_CSIZE )
+    {
+    /* 7-bit-data */
+    case ASCOPT_CS7:
+        con = ASCCON_M_7ASYNCPAR;   /* 7-bit-data and parity bit */
+        break;
+
+    /* 8-bit-data */
+    case ASCOPT_CS8:
+        if ( ASC_OPTIONS & ASCOPT_PARENB )
+            con = ASCCON_M_8ASYNCPAR;   /* 8-bit-data and parity bit */
+        else
+            con = ASCCON_M_8ASYNC;      /* 8-bit-data no parity */
+        break;
+    
+    /* 
+     *  only 7 and 8-bit frames are supported
+     *  if we don't use IOCTL extensions 
+     */
+    default:
+        return -1;
+    }
+
+    if ( ASC_OPTIONS & ASCOPT_STOPB )
+        SET_BIT(con, ASCCON_STP);       /* 2 stop bits */
+    else
+        CLEAR_BIT(con, ASCCON_STP);     /* 1 stop bit */
+
+    if ( ASC_OPTIONS & ASCOPT_PARENB )
+        SET_BIT(con, ASCCON_PEN);           /* enable parity checking */    
+    else
+        CLEAR_BIT(con, ASCCON_PEN);         /* disable parity checking */
+    
+    if ( ASC_OPTIONS & ASCOPT_PARODD )
+        SET_BIT(con, ASCCON_ODD);       /* odd parity */
+    else
+        CLEAR_BIT(con, ASCCON_ODD);     /* even parity */
+
+    if ( ASC_OPTIONS & ASCOPT_CREAD )
+        SET_BIT(pAsc->asc_whbcon, ASCWHBCON_SETREN); /* Receiver enable */
+
+    pAsc->asc_con |= con;
+
+    return 0;
+}
+
+void serial_putc (const char c)
+{
+    uint txFl = 0;
+
+    if (c == '\n') serial_putc ('\r');
+
+    /* check do we have a free space in the TX FIFO */
+    /* get current filling level */
+    do
+    {
+	txFl = ( pAsc->asc_fstat & ASCFSTAT_TXFFLMASK ) >> ASCFSTAT_TXFFLOFF;
+    }
+    while ( txFl == INCAASC_TXFIFO_FULL );
+
+    pAsc->asc_tbuf = c; /* write char to Transmit Buffer Register */
+    /* check for errors */
+    if ( pAsc->asc_con & ASCCON_OE )
+    {
+        SET_BIT(pAsc->asc_whbcon, ASCWHBCON_CLROE);
+        return;
+    }
+}
+
+void serial_puts (const char *s)
+{
+    while (*s)
+    {
+	serial_putc (*s++);
+    }
+}
+
+int serial_getc (void)
+{
+    ulong symbol_mask;
+    char c;
+
+    while (!serial_tstc());
+
+    symbol_mask =
+	((ASC_OPTIONS & ASCOPT_CSIZE) == ASCOPT_CS7) ? (0x7f) : (0xff);
+    
+    c = (char)(pAsc->asc_rbuf & symbol_mask);
+
+    return c;
+}
+
+int serial_tstc (void)
+{
+    int res = 1;
+
+    if ( (pAsc->asc_fstat & ASCFSTAT_RXFFLMASK) == 0 )
+    {
+        res = 0;
+    }
+    else if ( pAsc->asc_con & ASCCON_FE )
+    {
+        SET_BIT(pAsc->asc_whbcon, ASCWHBCON_CLRFE);
+        res = 0;
+    }
+    else if ( pAsc->asc_con & ASCCON_PE )
+    {
+        SET_BIT(pAsc->asc_whbcon, ASCWHBCON_CLRPE);
+        res = 0;
+    }
+    else if ( pAsc->asc_con & ASCCON_OE )
+    {
+        SET_BIT(pAsc->asc_whbcon, ASCWHBCON_CLROE);
+        res = 0;
+    }
+
+    return res;
+}
diff --git a/cpu/mips/serial.h b/cpu/mips/serial.h
new file mode 100644
index 0000000000..ee63360e63
--- /dev/null
+++ b/cpu/mips/serial.h
@@ -0,0 +1,178 @@
+/* incaAscSio.h - (INCA) ASC UART tty driver header */
+
+#ifndef __INCincaAscSioh
+#define __INCincaAscSioh
+
+#include <asm/inca-ip.h>
+
+/* channel operating modes */
+#define	ASCOPT_CSIZE	0x00000003
+#define	ASCOPT_CS7	0x00000001
+#define	ASCOPT_CS8	0x00000002
+#define	ASCOPT_PARENB	0x00000004
+#define	ASCOPT_STOPB	0x00000008
+#define	ASCOPT_PARODD	0x00000010
+#define	ASCOPT_CREAD	0x00000020
+
+#define ASC_OPTIONS		(ASCOPT_CREAD | ASCOPT_CS8)
+
+/* ASC input select (0 or 1) */
+#define CONSOLE_TTY	0
+
+/* use fractional divider for baudrate settings */
+#define INCAASC_USE_FDV
+
+#ifdef INCAASC_USE_FDV
+   #define INCAASC_FDV_LOW_BAUDRATE        71
+   #define INCAASC_FDV_HIGH_BAUDRATE       453   
+#endif /*INCAASC_USE_FDV*/
+
+
+#define INCAASC_TXFIFO_FL       1
+#define INCAASC_RXFIFO_FL       1
+#define INCAASC_TXFIFO_FULL     16
+
+/* interrupt lines masks for the ASC device interrupts*/
+/* change these macroses if it's necessary */
+#define INCAASC_IRQ_LINE_ALL        0x000F0000  /* all IRQs */
+
+#define INCAASC_IRQ_LINE_TIR            0x00010000      /* TIR - Tx */
+#define INCAASC_IRQ_LINE_RIR            0x00020000      /* RIR - Rx */
+#define INCAASC_IRQ_LINE_EIR            0x00040000      /* EIR - Err */
+#define INCAASC_IRQ_LINE_TBIR           0x00080000      /* TBIR - Tx Buf*/
+
+/* interrupt controller access macros */    
+#define ASC_INTERRUPTS_ENABLE(X)  \
+   *((volatile unsigned int*) INCA_IP_ICU_IM2_IER) |= X;
+#define ASC_INTERRUPTS_DISABLE(X) \
+   *((volatile unsigned int*) INCA_IP_ICU_IM2_IER) &= ~X;
+#define ASC_INTERRUPTS_CLEAR(X)   \
+   *((volatile unsigned int*) INCA_IP_ICU_IM2_ISR) = X;
+
+/* CLC register's bits and bitfields */
+#define ASCCLC_DISR        0x00000001
+#define ASCCLC_DISS        0x00000002
+#define ASCCLC_RMCMASK     0x0000FF00
+#define ASCCLC_RMCOFFSET   8
+
+/* CON register's bits and bitfields */
+#define ASCCON_MODEMASK 0x0007
+    #define ASCCON_M_8SYNC          0x0
+    #define ASCCON_M_8ASYNC         0x1
+    #define ASCCON_M_8IRDAASYNC     0x2
+    #define ASCCON_M_7ASYNCPAR      0x3
+    #define ASCCON_M_9ASYNC         0x4
+    #define ASCCON_M_8WAKEUPASYNC   0x5
+    #define ASCCON_M_8ASYNCPAR      0x7
+#define ASCCON_STP      0x0008
+#define ASCCON_REN      0x0010
+#define ASCCON_PEN      0x0020
+#define ASCCON_FEN      0x0040
+#define ASCCON_OEN      0x0080
+#define ASCCON_PE       0x0100
+#define ASCCON_FE       0x0200
+#define ASCCON_OE       0x0400
+#define ASCCON_FDE      0x0800
+#define ASCCON_ODD      0x1000
+#define ASCCON_BRS      0x2000
+#define ASCCON_LB       0x4000
+#define ASCCON_R        0x8000
+
+/* WHBCON register's bits and bitfields */
+#define ASCWHBCON_CLRREN    0x0010
+#define ASCWHBCON_SETREN    0x0020
+#define ASCWHBCON_CLRPE     0x0100
+#define ASCWHBCON_CLRFE     0x0200
+#define ASCWHBCON_CLROE     0x0400
+#define ASCWHBCON_SETPE     0x0800
+#define ASCWHBCON_SETFE     0x1000
+#define ASCWHBCON_SETOE     0x2000
+
+/* ABCON register's bits and bitfields */
+#define ASCABCON_ABEN       0x0001
+#define ASCABCON_AUREN      0x0002
+#define ASCABCON_ABSTEN     0x0004
+#define ASCABCON_ABDETEN    0x0008
+#define ASCABCON_FCDETEN    0x0010
+#define ASCABCON_EMMASK     0x0300
+    #define ASCABCON_EMOFF          8
+        #define ASCABCON_EM_DISAB       0x0
+        #define ASCABCON_EM_DURAB       0x1
+        #define ASCABCON_EM_ALWAYS      0x2
+#define ASCABCON_TXINV      0x0400
+#define ASCABCON_RXINV      0x0800
+
+/* FDV register mask, offset and bitfields*/
+#define ASCFDV_VALUE_MASK     0x000001FF
+
+/* WHBABCON register's bits and bitfields */
+#define ASCWHBABCON_SETABEN     0x0001
+#define ASCWHBABCON_CLRABEN     0x0002
+
+/* ABSTAT register's bits and bitfields */
+#define ASCABSTAT_FCSDET    0x0001
+#define ASCABSTAT_FCCDET    0x0002
+#define ASCABSTAT_SCSDET    0x0004
+#define ASCABSTAT_SCCDET    0x0008
+#define ASCABSTAT_DETWAIT   0x0010
+
+/* WHBABSTAT register's bits and bitfields */
+#define ASCWHBABSTAT_CLRFCSDET  0x0001
+#define ASCWHBABSTAT_SETFCSDET  0x0002
+#define ASCWHBABSTAT_CLRFCCDET  0x0004
+#define ASCWHBABSTAT_SETFCCDET  0x0008
+#define ASCWHBABSTAT_CLRSCSDET  0x0010
+#define ASCWHBABSTAT_SETSCSDET  0x0020
+#define ASCWHBABSTAT_SETSCCDET  0x0040
+#define ASCWHBABSTAT_CLRSCCDET  0x0080
+#define ASCWHBABSTAT_CLRDETWAIT 0x0100
+#define ASCWHBABSTAT_SETDETWAIT 0x0200
+
+/* TXFCON register's bits and bitfields */
+#define ASCTXFCON_TXFEN         0x0001
+#define ASCTXFCON_TXFFLU        0x0002
+#define ASCTXFCON_TXTMEN        0x0004
+#define ASCTXFCON_TXFITLMASK    0x3F00
+#define ASCTXFCON_TXFITLOFF     8
+
+/* RXFCON register's bits and bitfields */
+#define ASCRXFCON_RXFEN         0x0001
+#define ASCRXFCON_RXFFLU        0x0002
+#define ASCRXFCON_RXTMEN        0x0004
+#define ASCRXFCON_RXFITLMASK    0x3F00
+#define ASCRXFCON_RXFITLOFF     8
+
+/* FSTAT register's bits and bitfields */
+#define ASCFSTAT_RXFFLMASK      0x003F
+#define ASCFSTAT_TXFFLMASK      0x3F00
+#define ASCFSTAT_TXFFLOFF       8
+
+#define INCAASC_PMU_ENABLE(BIT) *((volatile ulong*)0xBF102000) |= (0x1 << BIT);
+
+typedef  struct         /* incaAsc_t */
+{
+    volatile unsigned long  asc_clc;                            /*0x0000*/
+    volatile unsigned long  asc_pisel;                          /*0x0004*/
+    volatile unsigned long  asc_rsvd1[2];   /* for mapping */   /*0x0008*/
+    volatile unsigned long  asc_con;                            /*0x0010*/
+    volatile unsigned long  asc_bg;                             /*0x0014*/
+    volatile unsigned long  asc_fdv;                            /*0x0018*/
+    volatile unsigned long  asc_pmw;        /* not used */      /*0x001C*/
+    volatile unsigned long  asc_tbuf;                           /*0x0020*/
+    volatile unsigned long  asc_rbuf;                           /*0x0024*/
+    volatile unsigned long  asc_rsvd2[2];   /* for mapping */   /*0x0028*/
+    volatile unsigned long  asc_abcon;                          /*0x0030*/
+    volatile unsigned long  asc_abstat;     /* not used */      /*0x0034*/
+    volatile unsigned long  asc_rsvd3[2];   /* for mapping */   /*0x0038*/
+    volatile unsigned long  asc_rxfcon;                         /*0x0040*/
+    volatile unsigned long  asc_txfcon;                         /*0x0044*/
+    volatile unsigned long  asc_fstat;                          /*0x0048*/
+    volatile unsigned long  asc_rsvd4;      /* for mapping */   /*0x004C*/
+    volatile unsigned long  asc_whbcon;                         /*0x0050*/
+    volatile unsigned long  asc_whbabcon;                       /*0x0054*/
+    volatile unsigned long  asc_whbabstat;  /* not used */      /*0x0058*/
+
+} incaAsc_t;
+
+#endif /* __INCincaAscSioh */
+
diff --git a/cpu/mips/start.S b/cpu/mips/start.S
new file mode 100644
index 0000000000..bf11655617
--- /dev/null
+++ b/cpu/mips/start.S
@@ -0,0 +1,350 @@
+/*
+ *  Startup Code for MIPS32 CPU-core
+ *
+ *  Copyright (c) 2003	Wolfgang Denk <wd@denx.de>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+
+#include <config.h>
+#include <version.h>
+#include <asm/regdef.h>
+#include <asm/mipsregs.h>
+
+
+#define RVECENT(f,n) \
+   b f; nop
+#define XVECENT(f,bev) \
+   b f     ;           \
+   li k0,bev
+
+	.set noreorder
+
+	.globl _start
+	.text
+_start:
+	RVECENT(reset,0)	/* U-boot entry point */
+	RVECENT(reset,1)	/* software reboot */
+#ifdef CONFIG_INCA_IP
+	.word 0x000020C4	/* EBU init code, fetched during booting */
+	.word 0x00000000        /* phase of the flash                    */
+#else
+	RVECENT(romReserved,2)
+#endif
+	RVECENT(romReserved,3)
+	RVECENT(romReserved,4)
+	RVECENT(romReserved,5)
+	RVECENT(romReserved,6)
+	RVECENT(romReserved,7)
+	RVECENT(romReserved,8)
+	RVECENT(romReserved,9)
+	RVECENT(romReserved,10)
+	RVECENT(romReserved,11)
+	RVECENT(romReserved,12)
+	RVECENT(romReserved,13)
+	RVECENT(romReserved,14)
+	RVECENT(romReserved,15)
+	RVECENT(romReserved,16)
+	RVECENT(romReserved,17) 
+	RVECENT(romReserved,18)
+	RVECENT(romReserved,19)
+	RVECENT(romReserved,20)
+	RVECENT(romReserved,21)
+	RVECENT(romReserved,22)
+	RVECENT(romReserved,23)
+	RVECENT(romReserved,24)
+	RVECENT(romReserved,25)
+	RVECENT(romReserved,26)
+	RVECENT(romReserved,27)
+	RVECENT(romReserved,28)
+	RVECENT(romReserved,29)
+	RVECENT(romReserved,30)
+	RVECENT(romReserved,31)
+	RVECENT(romReserved,32)
+	RVECENT(romReserved,33)
+	RVECENT(romReserved,34)
+	RVECENT(romReserved,35)
+	RVECENT(romReserved,36)
+	RVECENT(romReserved,37)
+	RVECENT(romReserved,38)
+	RVECENT(romReserved,39)
+	RVECENT(romReserved,40)
+	RVECENT(romReserved,41)
+	RVECENT(romReserved,42)
+	RVECENT(romReserved,43)
+	RVECENT(romReserved,44)
+	RVECENT(romReserved,45)
+	RVECENT(romReserved,46)
+	RVECENT(romReserved,47)
+	RVECENT(romReserved,48)
+	RVECENT(romReserved,49)
+	RVECENT(romReserved,50)
+	RVECENT(romReserved,51)
+	RVECENT(romReserved,52)
+	RVECENT(romReserved,53)
+	RVECENT(romReserved,54)
+	RVECENT(romReserved,55)
+	RVECENT(romReserved,56)
+	RVECENT(romReserved,57)
+	RVECENT(romReserved,58)
+	RVECENT(romReserved,59)
+	RVECENT(romReserved,60)
+	RVECENT(romReserved,61)
+	RVECENT(romReserved,62)
+	RVECENT(romReserved,63) 
+	XVECENT(romExcHandle,0x200)	/* bfc00200: R4000 tlbmiss vector */
+	RVECENT(romReserved,65)
+	RVECENT(romReserved,66)
+	RVECENT(romReserved,67)
+	RVECENT(romReserved,68)
+	RVECENT(romReserved,69)
+	RVECENT(romReserved,70)
+	RVECENT(romReserved,71)
+	RVECENT(romReserved,72)
+	RVECENT(romReserved,73)
+	RVECENT(romReserved,74)
+	RVECENT(romReserved,75)
+	RVECENT(romReserved,76)
+	RVECENT(romReserved,77)
+	RVECENT(romReserved,78)
+	RVECENT(romReserved,79) 
+	XVECENT(romExcHandle,0x280)	/* bfc00280: R4000 xtlbmiss vector */
+	RVECENT(romReserved,81)
+	RVECENT(romReserved,82)
+	RVECENT(romReserved,83)
+	RVECENT(romReserved,84)
+	RVECENT(romReserved,85)
+	RVECENT(romReserved,86)
+	RVECENT(romReserved,87)
+	RVECENT(romReserved,88)
+	RVECENT(romReserved,89)
+	RVECENT(romReserved,90)
+	RVECENT(romReserved,91)
+	RVECENT(romReserved,92)
+	RVECENT(romReserved,93)
+	RVECENT(romReserved,94)
+	RVECENT(romReserved,95) 
+	XVECENT(romExcHandle,0x300)	/* bfc00300: R4000 cache vector */
+	RVECENT(romReserved,97)
+	RVECENT(romReserved,98)
+	RVECENT(romReserved,99)
+	RVECENT(romReserved,100)
+	RVECENT(romReserved,101)
+	RVECENT(romReserved,102)
+	RVECENT(romReserved,103)
+	RVECENT(romReserved,104)
+	RVECENT(romReserved,105)
+	RVECENT(romReserved,106)
+	RVECENT(romReserved,107)
+	RVECENT(romReserved,108)
+	RVECENT(romReserved,109)
+	RVECENT(romReserved,110)
+	RVECENT(romReserved,111)
+	XVECENT(romExcHandle,0x380)	/* bfc00380: R4000 general vector */
+	RVECENT(romReserved,113)
+	RVECENT(romReserved,114)
+	RVECENT(romReserved,115)
+	RVECENT(romReserved,116)
+	RVECENT(romReserved,116)
+	RVECENT(romReserved,118)
+	RVECENT(romReserved,119)
+	RVECENT(romReserved,120)
+	RVECENT(romReserved,121)
+	RVECENT(romReserved,122)
+	RVECENT(romReserved,123)
+	RVECENT(romReserved,124)
+	RVECENT(romReserved,125)
+	RVECENT(romReserved,126)
+	RVECENT(romReserved,127)
+   
+	/* We hope there are no more reserved vectors!
+	 * 128 * 8 == 1024 == 0x400
+	 * so this is address R_VEC+0x400 == 0xbfc00400
+	 */
+	.align 4
+reset:
+
+	/* Clear watch registers.
+	 */
+	mtc0	zero, CP0_WATCHLO
+	mtc0	zero, CP0_WATCHHI
+
+	/* STATUS register */
+	mfc0	k0, CP0_STATUS
+	li	k1, ~ST0_IE
+	and	k0, k1
+	mtc0	k0, CP0_STATUS
+
+	/* CAUSE register */
+	mtc0	zero, CP0_CAUSE
+
+	/* Init Timer */
+	mtc0	zero, CP0_COUNT
+	mtc0	zero, CP0_COMPARE
+
+	/* CONFIG0 register */
+	li	t0, CONF_CM_UNCACHED
+	mtc0	t0, CP0_CONFIG
+
+#ifdef CONFIG_INCA_IP
+	/* Disable INCA-IP Watchdog.
+	 */
+	bal	disable_incaip_wdt
+	nop
+#endif
+
+	/* Initialize any external memory. 
+	 */
+	bal	memsetup
+	nop
+
+	/* Initialize caches...
+	 */
+	bal	mips_cache_reset
+	nop
+
+	/* ... and enable them.
+	 */
+	li	t0, CONF_CM_CACHABLE_NONCOHERENT
+	mtc0	t0, CP0_CONFIG
+
+
+	/* Set up temporary stack.
+	 */
+	li	a0, CFG_INIT_SP_OFFSET
+	bal	mips_cache_lock
+	nop
+
+	li	t0, CFG_SDRAM_BASE + CFG_INIT_SP_OFFSET
+	la	sp, 0(t0)
+
+	/* Initialize GOT pointer.
+	 */
+	bal	1f
+	nop
+	.word	_GLOBAL_OFFSET_TABLE_ - 1f + 4
+1:
+	move	gp, ra
+	lw	t1, 0(ra)
+	add	gp, t1
+	la	t9, board_init_f
+	j	t9
+	nop
+
+
+/*
+ * void relocate_code (addr_sp, gd, addr_moni)
+ *
+ * This "function" does not return, instead it continues in RAM
+ * after relocating the monitor code.
+ *
+ * a0 = addr_sp
+ * a1 = gd
+ * a2 = destination address
+ */
+	.globl	relocate_code
+	.ent	relocate_code
+relocate_code:
+	move	sp, a0		/* Set new stack pointer		*/
+
+	/*
+	 * Fix GOT pointer:
+	 *
+	 * New GOT-PTR = (old GOT-PTR - CFG_MONITOR_BASE) + Destination Address
+	 */
+	move	t6, gp
+	sub	gp, CFG_MONITOR_BASE
+	add	gp, a2			/* gp now adjusted		*/
+	sub	t6, gp, t6		/* t6 <-- relocation offset	*/
+	
+	li	t0, CFG_MONITOR_BASE
+	add	t2, t0, CFG_MONITOR_LEN
+	move	t1, a2
+
+	/*
+	 * t0 = source address
+	 * t1 = target address
+	 * t2 = source end address
+	 */
+1:
+	lw	t3, 0(t0)
+	sw	t3, 0(t1)
+	addu	t0, 4
+	ble	t0, t2, 1b
+	addu	t1, 4			/* delay slot			*/
+
+	/* If caches were enabled, we would have to flush them here.
+	 */
+
+	/* Jump to where we've relocated ourselves.
+	 */
+	addi	t0, a2, in_ram - _start
+	j	t0
+	nop
+
+	.word	uboot_end_data
+	.word	uboot_end
+	.word	num_got_entries
+
+in_ram:
+	/* Now we want to update GOT.
+	 */
+	lw	t3, -4(t0)	/* t3 <-- num_got_entries	*/
+	addi	t4, gp, 8	/* Skipping first two entries.	*/
+	li	t2, 2
+1:
+	lw	t1, 0(t4)
+	beqz	t1, 2f
+	add	t1, t6
+	sw	t1, 0(t4)
+2:
+	addi	t2, 1
+	blt	t2, t3, 1b
+	addi	t4, 4		/* delay slot			*/
+
+	/* Clear BSS.
+	 */
+	lw	t1, -12(t0)	/* t1 <-- uboot_end_data	*/
+	lw	t2, -8(t0)	/* t2 <-- uboot_end		*/
+	add	t1, t6		/* adjust pointers		*/
+	add	t2, t6
+
+	sub	t1, 4
+1:	addi	t1, 4
+	bltl	t1, t2, 1b
+	sw	zero, 0(t1)	/* delay slot			*/
+	
+	move	a0, a1
+	la	t9, board_init_r
+	j	t9
+	move	a1, a2		/* delay slot			*/
+
+	.end	relocate_code
+	
+
+
+	/* Exception handlers.
+	 */
+romReserved:
+	b romReserved
+
+romExcHandle:
+	b romExcHandle
+
diff --git a/include/asm-mips/inca-ip.h b/include/asm-mips/inca-ip.h
new file mode 100644
index 0000000000..dbacb33f80
--- /dev/null
+++ b/include/asm-mips/inca-ip.h
@@ -0,0 +1,2431 @@
+
+/******************************************************************************
+       Copyright (c) 2002, Infineon Technologies.  All rights reserved.
+
+                               No Warranty
+   Because the program is licensed free of charge, there is no warranty for 
+   the program, to the extent permitted by applicable law.  Except when     
+   otherwise stated in writing the copyright holders and/or other parties   
+   provide the program "as is" without warranty of any kind, either         
+   expressed or implied, including, but not limited to, the implied         
+   warranties of merchantability and fitness for a particular purpose. The  
+   entire risk as to the quality and performance of the program is with     
+   you.  should the program prove defective, you assume the cost of all     
+   necessary servicing, repair or correction.                               
+                                                                            
+   In no event unless required by applicable law or agreed to in writing    
+   will any copyright holder, or any other party who may modify and/or      
+   redistribute the program as permitted above, be liable to you for        
+   damages, including any general, special, incidental or consequential     
+   damages arising out of the use or inability to use the program           
+   (including but not limited to loss of data or data being rendered        
+   inaccurate or losses sustained by you or third parties or a failure of   
+   the program to operate with any other programs), even if such holder or  
+   other party has been advised of the possibility of such damages. 
+******************************************************************************/
+		
+         
+/***********************************************************************/
+/*  Module      :  WDT register address and bits                       */
+/***********************************************************************/
+         
+#define INCA_IP_WDT                          (0xB8000000)
+/***********************************************************************/   
+
+      
+/***Reset Status Register Power On***/ 
+#define INCA_IP_WDT_RST_SR                       ((volatile u32*)(INCA_IP_WDT+ 0x0014))
+      
+/***Reset Request Register***/ 
+#define INCA_IP_WDT_RST_REQ                      ((volatile u32*)(INCA_IP_WDT+ 0x0010))
+#define INCA_IP_WDT_RST_REQ_SWBOOT                        (1 << 24)
+#define INCA_IP_WDT_RST_REQ_SWCFG                          (1 << 16)
+#define INCA_IP_WDT_RST_REQ_RRPHY                          (1 << 5)
+#define INCA_IP_WDT_RST_REQ_RRHSP                          (1 << 4)
+#define INCA_IP_WDT_RST_REQ_RRFPI                          (1 << 3)
+#define INCA_IP_WDT_RST_REQ_RREXT                          (1 << 2)
+#define INCA_IP_WDT_RST_REQ_RRDSP                          (1 << 1)
+#define INCA_IP_WDT_RST_REQ_RRCPU                          (1 << 0)
+      
+/***NMI Status Register***/ 
+#define INCA_IP_WDT_NMISR                        ((volatile u32*)(INCA_IP_WDT+ 0x002C))
+#define INCA_IP_WDT_NMISR_NMIWDT                        (1 << 2)
+#define INCA_IP_WDT_NMISR_NMIPLL                        (1 << 1)
+#define INCA_IP_WDT_NMISR_NMIEXT                        (1 << 0)
+      
+/***Manufacturer Identification Register***/ 
+#define INCA_IP_WDT_MANID                        ((volatile u32*)(INCA_IP_WDT+ 0x0070))
+#define INCA_IP_WDT_MANID_MANUF (value)              (((( 1 << 11) - 1) & (value)) << 5)
+      
+/***Chip Identification Register***/ 
+#define INCA_IP_WDT_CHIPID                       ((volatile u32*)(INCA_IP_WDT+ 0x0074))
+#define INCA_IP_WDT_CHIPID_VERSION (value)            (((( 1 << 4) - 1) & (value)) << 28)
+#define INCA_IP_WDT_CHIPID_PART_NUMBER (value)        (((( 1 << 16) - 1) & (value)) << 12)
+#define INCA_IP_WDT_CHIPID_MANID (value)              (((( 1 << 11) - 1) & (value)) << 1)
+      
+/***Redesign Tracing Identification Register***/ 
+#define INCA_IP_WDT_RTID                         ((volatile u32*)(INCA_IP_WDT+ 0x0078))
+#define INCA_IP_WDT_RTID_LC                              (1 << 15)
+#define INCA_IP_WDT_RTID_RIX (value)                (((( 1 << 3) - 1) & (value)) << 0)
+      
+/***Watchdog Timer Control Register 0***/ 
+#define INCA_IP_WDT_WDT_CON0                    ((volatile u32*)(INCA_IP_WDT+ 0x0020))
+      
+/***Watchdog Timer Control Register 1***/ 
+#define INCA_IP_WDT_WDT_CON1                    ((volatile u32*)(INCA_IP_WDT+ 0x0024))
+#define INCA_IP_WDT_WDT_CON1_WDTDR                          (1 << 3)
+#define INCA_IP_WDT_WDT_CON1_WDTIR                          (1 << 2)
+      
+/***Watchdog Timer Status Register***/ 
+#define INCA_IP_WDT_WDT_SR                       ((volatile u32*)(INCA_IP_WDT+ 0x0028))
+#define INCA_IP_WDT_WDT_SR_WDTTIM (value)             (((( 1 << 16) - 1) & (value)) << 16)
+#define INCA_IP_WDT_WDT_SR_WDTPR                          (1 << 5)
+#define INCA_IP_WDT_WDT_SR_WDTTO                          (1 << 4)
+#define INCA_IP_WDT_WDT_SR_WDTDS                          (1 << 3)
+#define INCA_IP_WDT_WDT_SR_WDTIS                          (1 << 2)
+#define INCA_IP_WDT_WDT_SR_WDTOE                          (1 << 1)
+#define INCA_IP_WDT_WDT_SR_WDTAE                          (1 << 0)		
+         
+/***********************************************************************/
+/*  Module      :  CGU register address and bits                       */
+/***********************************************************************/
+         
+#define INCA_IP_CGU                          (0xBF107000)
+/***********************************************************************/   
+
+      
+/***CGU PLL1 Control Register***/ 
+#define INCA_IP_CGU_CGU_PLL1CR                   ((volatile u32*)(INCA_IP_CGU+ 0x0008))
+#define INCA_IP_CGU_CGU_PLL1CR_SWRST                          (1 << 31)
+#define INCA_IP_CGU_CGU_PLL1CR_EN                              (1 << 30)
+#define INCA_IP_CGU_CGU_PLL1CR_NDIV (value)               (((( 1 << 6) - 1) & (value)) << 16)
+#define INCA_IP_CGU_CGU_PLL1CR_MDIV (value)               (((( 1 << 4) - 1) & (value)) << 0)
+      
+/***CGU PLL0 Control Register***/ 
+#define INCA_IP_CGU_CGU_PLL0CR                   ((volatile u32*)(INCA_IP_CGU+ 0x0000))
+#define INCA_IP_CGU_CGU_PLL0CR_SWRST                          (1 << 31)
+#define INCA_IP_CGU_CGU_PLL0CR_EN                              (1 << 30)
+#define INCA_IP_CGU_CGU_PLL0CR_NDIV (value)               (((( 1 << 6) - 1) & (value)) << 16)
+#define INCA_IP_CGU_CGU_PLL0CR_MDIV (value)               (((( 1 << 4) - 1) & (value)) << 0)
+      
+/***CGU PLL0 Status Register***/ 
+#define INCA_IP_CGU_CGU_PLL0SR                   ((volatile u32*)(INCA_IP_CGU+ 0x0004))
+#define INCA_IP_CGU_CGU_PLL0SR_LOCK                            (1 << 31)
+#define INCA_IP_CGU_CGU_PLL0SR_RCF                              (1 << 29)
+#define INCA_IP_CGU_CGU_PLL0SR_PLLBYP                        (1 << 15)
+      
+/***CGU PLL1 Status Register***/ 
+#define INCA_IP_CGU_CGU_PLL1SR                   ((volatile u32*)(INCA_IP_CGU+ 0x000C))
+#define INCA_IP_CGU_CGU_PLL1SR_LOCK                            (1 << 31)
+#define INCA_IP_CGU_CGU_PLL1SR_RCF                              (1 << 29)
+#define INCA_IP_CGU_CGU_PLL1SR_PLLBYP                        (1 << 15)
+      
+/***CGU Divider Control Register***/ 
+#define INCA_IP_CGU_CGU_DIVCR                    ((volatile u32*)(INCA_IP_CGU+ 0x0010))
+      
+/***CGU Multiplexer Control Register***/ 
+#define INCA_IP_CGU_CGU_MUXCR                    ((volatile u32*)(INCA_IP_CGU+ 0x0014))
+#define INCA_IP_CGU_CGU_MUXCR_SWRST                          (1 << 31)
+#define INCA_IP_CGU_CGU_MUXCR_MUXII                          (1 << 1)
+#define INCA_IP_CGU_CGU_MUXCR_MUXI                            (1 << 0)
+      
+/***CGU Fractional Divider Control Register***/ 
+#define INCA_IP_CGU_CGU_FDCR                    ((volatile u32*)(INCA_IP_CGU+ 0x0018))
+#define INCA_IP_CGU_CGU_FDCR_FDEN                            (1 << 31)
+#define INCA_IP_CGU_CGU_FDCR_INTEGER (value)            (((( 1 << 12) - 1) & (value)) << 16)
+#define INCA_IP_CGU_CGU_FDCR_FRACTION (value)          (((( 1 << 16) - 1) & (value)) << 0)		
+         
+/***********************************************************************/
+/*  Module      :  PMU register address and bits                       */
+/***********************************************************************/
+         
+#define INCA_IP_PMU                          (0xBF102000)
+/***********************************************************************/   
+
+      
+/***PM Global Enable Register***/ 
+#define INCA_IP_PMU_PM_GEN                       ((volatile u32*)(INCA_IP_PMU+ 0x0000))
+#define INCA_IP_PMU_PM_GEN_EN16                            (1 << 16)
+#define INCA_IP_PMU_PM_GEN_EN15                            (1 << 15)
+#define INCA_IP_PMU_PM_GEN_EN14                            (1 << 14)
+#define INCA_IP_PMU_PM_GEN_EN13                            (1 << 13)
+#define INCA_IP_PMU_PM_GEN_EN12                            (1 << 12)
+#define INCA_IP_PMU_PM_GEN_EN11                            (1 << 11)
+#define INCA_IP_PMU_PM_GEN_EN10                            (1 << 10)
+#define INCA_IP_PMU_PM_GEN_EN9                              (1 << 9)
+#define INCA_IP_PMU_PM_GEN_EN8                              (1 << 8)
+#define INCA_IP_PMU_PM_GEN_EN7                              (1 << 7)
+#define INCA_IP_PMU_PM_GEN_EN6                              (1 << 6)
+#define INCA_IP_PMU_PM_GEN_EN5                              (1 << 5)
+#define INCA_IP_PMU_PM_GEN_EN4                              (1 << 4)
+#define INCA_IP_PMU_PM_GEN_EN3                              (1 << 3)
+#define INCA_IP_PMU_PM_GEN_EN2                              (1 << 2)
+#define INCA_IP_PMU_PM_GEN_EN0                              (1 << 0)
+      
+/***PM Power Down Enable Register***/ 
+#define INCA_IP_PMU_PM_PDEN                      ((volatile u32*)(INCA_IP_PMU+ 0x0008))
+#define INCA_IP_PMU_PM_PDEN_EN16                            (1 << 16)
+#define INCA_IP_PMU_PM_PDEN_EN15                            (1 << 15)
+#define INCA_IP_PMU_PM_PDEN_EN14                            (1 << 14)
+#define INCA_IP_PMU_PM_PDEN_EN13                            (1 << 13)
+#define INCA_IP_PMU_PM_PDEN_EN12                            (1 << 12)
+#define INCA_IP_PMU_PM_PDEN_EN11                            (1 << 11)
+#define INCA_IP_PMU_PM_PDEN_EN10                            (1 << 10)
+#define INCA_IP_PMU_PM_PDEN_EN9                              (1 << 9)
+#define INCA_IP_PMU_PM_PDEN_EN8                              (1 << 8)
+#define INCA_IP_PMU_PM_PDEN_EN7                              (1 << 7)
+#define INCA_IP_PMU_PM_PDEN_EN5                              (1 << 5)
+#define INCA_IP_PMU_PM_PDEN_EN4                              (1 << 4)
+#define INCA_IP_PMU_PM_PDEN_EN3                              (1 << 3)
+#define INCA_IP_PMU_PM_PDEN_EN2                              (1 << 2)
+#define INCA_IP_PMU_PM_PDEN_EN0                              (1 << 0)
+      
+/***PM Wake-Up from Power Down Register***/ 
+#define INCA_IP_PMU_PM_WUP                       ((volatile u32*)(INCA_IP_PMU+ 0x0010))
+#define INCA_IP_PMU_PM_WUP_WUP16                          (1 << 16)
+#define INCA_IP_PMU_PM_WUP_WUP15                          (1 << 15)
+#define INCA_IP_PMU_PM_WUP_WUP14                          (1 << 14)
+#define INCA_IP_PMU_PM_WUP_WUP13                          (1 << 13)
+#define INCA_IP_PMU_PM_WUP_WUP12                          (1 << 12)
+#define INCA_IP_PMU_PM_WUP_WUP11                          (1 << 11)
+#define INCA_IP_PMU_PM_WUP_WUP10                          (1 << 10)
+#define INCA_IP_PMU_PM_WUP_WUP9                            (1 << 9)
+#define INCA_IP_PMU_PM_WUP_WUP8                            (1 << 8)
+#define INCA_IP_PMU_PM_WUP_WUP7                            (1 << 7)
+#define INCA_IP_PMU_PM_WUP_WUP5                            (1 << 5)
+#define INCA_IP_PMU_PM_WUP_WUP4                            (1 << 4)
+#define INCA_IP_PMU_PM_WUP_WUP3                            (1 << 3)
+#define INCA_IP_PMU_PM_WUP_WUP2                            (1 << 2)
+#define INCA_IP_PMU_PM_WUP_WUP0                            (1 << 0)
+      
+/***PM Control Register***/ 
+#define INCA_IP_PMU_PM_CR                        ((volatile u32*)(INCA_IP_PMU+ 0x0014))
+#define INCA_IP_PMU_PM_CR_AWEN                            (1 << 31)
+#define INCA_IP_PMU_PM_CR_SWRST                          (1 << 30)
+#define INCA_IP_PMU_PM_CR_SWCR                            (1 << 2)
+#define INCA_IP_PMU_PM_CR_CRD (value)                (((( 1 << 2) - 1) & (value)) << 0)		
+         
+/***********************************************************************/
+/*  Module      :  BCU register address and bits                       */
+/***********************************************************************/
+         
+#define INCA_IP_BCU                          (0xB8000100)
+/***********************************************************************/   
+
+      
+/***BCU Control Register (0010H)***/ 
+#define INCA_IP_BCU_BCU_CON                      ((volatile u32*)(INCA_IP_BCU+ 0x0010))
+#define INCA_IP_BCU_BCU_CON_SPC (value)                (((( 1 << 8) - 1) & (value)) << 24)
+#define INCA_IP_BCU_BCU_CON_SPE                              (1 << 19)
+#define INCA_IP_BCU_BCU_CON_PSE                              (1 << 18)
+#define INCA_IP_BCU_BCU_CON_DBG                              (1 << 16)
+#define INCA_IP_BCU_BCU_CON_TOUT (value)               (((( 1 << 16) - 1) & (value)) << 0)
+      
+/***BCU Error Control Capture Register (0020H)***/ 
+#define INCA_IP_BCU_BCU_ECON                    ((volatile u32*)(INCA_IP_BCU+ 0x0020))
+#define INCA_IP_BCU_BCU_ECON_TAG (value)                (((( 1 << 4) - 1) & (value)) << 24)
+#define INCA_IP_BCU_BCU_ECON_RDN                              (1 << 23)
+#define INCA_IP_BCU_BCU_ECON_WRN                              (1 << 22)
+#define INCA_IP_BCU_BCU_ECON_SVM                              (1 << 21)
+#define INCA_IP_BCU_BCU_ECON_ACK (value)                (((( 1 << 2) - 1) & (value)) << 19)
+#define INCA_IP_BCU_BCU_ECON_ABT                              (1 << 18)
+#define INCA_IP_BCU_BCU_ECON_RDY                              (1 << 17)
+#define INCA_IP_BCU_BCU_ECON_TOUT                            (1 << 16)
+#define INCA_IP_BCU_BCU_ECON_ERRCNT (value)             (((( 1 << 16) - 1) & (value)) << 0)
+#define INCA_IP_BCU_BCU_ECON_OPC (value)                (((( 1 << 4) - 1) & (value)) << 28)
+      
+/***BCU Error Address Capture Register (0024 H)***/ 
+#define INCA_IP_BCU_BCU_EADD                    ((volatile u32*)(INCA_IP_BCU+ 0x0024))
+#define INCA_IP_BCU_BCU_EADD_FPIADR
+      
+/***BCU Error Data Capture Register (0028H)***/ 
+#define INCA_IP_BCU_BCU_EDAT                    ((volatile u32*)(INCA_IP_BCU+ 0x0028))
+#define INCA_IP_BCU_BCU_EDAT_FPIDAT		
+         
+/***********************************************************************/
+/*  Module      :  MBC register address and bits                       */
+/***********************************************************************/
+         
+#define INCA_IP_MBC                          (0xBF103000)
+/***********************************************************************/   
+
+      
+/***Mailbox CPU Configuration Register***/ 
+#define INCA_IP_MBC_MBC_CFG                      ((volatile u32*)(INCA_IP_MBC+ 0x0080))
+#define INCA_IP_MBC_MBC_CFG_SWAP (value)               (((( 1 << 2) - 1) & (value)) << 6)
+#define INCA_IP_MBC_MBC_CFG_RES                              (1 << 5)
+#define INCA_IP_MBC_MBC_CFG_FWID (value)               (((( 1 << 4) - 1) & (value)) << 1)
+#define INCA_IP_MBC_MBC_CFG_SIZE                            (1 << 0)
+      
+/***Mailbox CPU Interrupt Status Register***/ 
+#define INCA_IP_MBC_MBC_ISR                      ((volatile u32*)(INCA_IP_MBC+ 0x0084))
+#define INCA_IP_MBC_MBC_ISR_B3DA                            (1 << 31)
+#define INCA_IP_MBC_MBC_ISR_B2DA                            (1 << 30)
+#define INCA_IP_MBC_MBC_ISR_B1E                              (1 << 29)
+#define INCA_IP_MBC_MBC_ISR_B0E                              (1 << 28)
+#define INCA_IP_MBC_MBC_ISR_WDT                              (1 << 27)
+#define INCA_IP_MBC_MBC_ISR_DS260 (value)             (((( 1 << 27) - 1) & (value)) << 0)
+      
+/***Mailbox CPU Mask Register***/ 
+#define INCA_IP_MBC_MBC_MSK                      ((volatile u32*)(INCA_IP_MBC+ 0x0088))
+#define INCA_IP_MBC_MBC_MSK_B3DA                            (1 << 31)
+#define INCA_IP_MBC_MBC_MSK_B2DA                            (1 << 30)
+#define INCA_IP_MBC_MBC_MSK_B1E                              (1 << 29)
+#define INCA_IP_MBC_MBC_MSK_B0E                              (1 << 28)
+#define INCA_IP_MBC_MBC_MSK_WDT                              (1 << 27)
+#define INCA_IP_MBC_MBC_MSK_DS260 (value)             (((( 1 << 27) - 1) & (value)) << 0)
+      
+/***Mailbox CPU Mask 01 Register***/ 
+#define INCA_IP_MBC_MBC_MSK01                    ((volatile u32*)(INCA_IP_MBC+ 0x008C))
+#define INCA_IP_MBC_MBC_MSK01_B3DA                            (1 << 31)
+#define INCA_IP_MBC_MBC_MSK01_B2DA                            (1 << 30)
+#define INCA_IP_MBC_MBC_MSK01_B1E                              (1 << 29)
+#define INCA_IP_MBC_MBC_MSK01_B0E                              (1 << 28)
+#define INCA_IP_MBC_MBC_MSK01_WDT                              (1 << 27)
+#define INCA_IP_MBC_MBC_MSK01_DS260 (value)             (((( 1 << 27) - 1) & (value)) << 0)
+      
+/***Mailbox CPU Mask 10 Register***/ 
+#define INCA_IP_MBC_MBC_MSK10                    ((volatile u32*)(INCA_IP_MBC+ 0x0090))
+#define INCA_IP_MBC_MBC_MSK10_B3DA                            (1 << 31)
+#define INCA_IP_MBC_MBC_MSK10_B2DA                            (1 << 30)
+#define INCA_IP_MBC_MBC_MSK10_B1E                              (1 << 29)
+#define INCA_IP_MBC_MBC_MSK10_B0E                              (1 << 28)
+#define INCA_IP_MBC_MBC_MSK10_WDT                              (1 << 27)
+#define INCA_IP_MBC_MBC_MSK10_DS260 (value)             (((( 1 << 27) - 1) & (value)) << 0)
+      
+/***Mailbox CPU Short Command Register***/ 
+#define INCA_IP_MBC_MBC_CMD                      ((volatile u32*)(INCA_IP_MBC+ 0x0094))
+#define INCA_IP_MBC_MBC_CMD_CS270 (value)             (((( 1 << 28) - 1) & (value)) << 0)
+      
+/***Mailbox CPU Input Data of Buffer 0***/ 
+#define INCA_IP_MBC_MBC_ID0                      ((volatile u32*)(INCA_IP_MBC+ 0x0000))
+#define INCA_IP_MBC_MBC_ID0_INDATA
+      
+/***Mailbox CPU Input Data of Buffer 1***/ 
+#define INCA_IP_MBC_MBC_ID1                      ((volatile u32*)(INCA_IP_MBC+ 0x0020))
+#define INCA_IP_MBC_MBC_ID1_INDATA
+      
+/***Mailbox CPU Output Data of Buffer 2***/ 
+#define INCA_IP_MBC_MBC_OD2                      ((volatile u32*)(INCA_IP_MBC+ 0x0040))
+#define INCA_IP_MBC_MBC_OD2_OUTDATA
+      
+/***Mailbox CPU Output Data of Buffer 3***/ 
+#define INCA_IP_MBC_MBC_OD3                      ((volatile u32*)(INCA_IP_MBC+ 0x0060))
+#define INCA_IP_MBC_MBC_OD3_OUTDATA
+      
+/***Mailbox CPU Control Register of Buffer 0***/ 
+#define INCA_IP_MBC_MBC_CR0                      ((volatile u32*)(INCA_IP_MBC+ 0x0004))
+#define INCA_IP_MBC_MBC_CR0_RDYABTFLS (value)          (((( 1 << 3) - 1) & (value)) << 0)
+      
+/***Mailbox CPU Control Register of Buffer 1***/ 
+#define INCA_IP_MBC_MBC_CR1                      ((volatile u32*)(INCA_IP_MBC+ 0x0024))
+#define INCA_IP_MBC_MBC_CR1_RDYABTFLS (value)          (((( 1 << 3) - 1) & (value)) << 0)
+      
+/***Mailbox CPU Control Register of Buffer 2***/ 
+#define INCA_IP_MBC_MBC_CR2                      ((volatile u32*)(INCA_IP_MBC+ 0x0044))
+#define INCA_IP_MBC_MBC_CR2_RDYABTFLS (value)          (((( 1 << 3) - 1) & (value)) << 0)
+      
+/***Mailbox CPU Control Register of Buffer 3***/ 
+#define INCA_IP_MBC_MBC_CR3                      ((volatile u32*)(INCA_IP_MBC+ 0x0064))
+#define INCA_IP_MBC_MBC_CR3_RDYABTFLS (value)          (((( 1 << 3) - 1) & (value)) << 0)
+      
+/***Mailbox CPU Free Space of Buffer 0***/ 
+#define INCA_IP_MBC_MBC_FS0                      ((volatile u32*)(INCA_IP_MBC+ 0x0008))
+#define INCA_IP_MBC_MBC_FS0_FS
+      
+/***Mailbox CPU Free Space of Buffer 1***/ 
+#define INCA_IP_MBC_MBC_FS1                      ((volatile u32*)(INCA_IP_MBC+ 0x0028))
+#define INCA_IP_MBC_MBC_FS1_FS
+      
+/***Mailbox CPU Free Space of Buffer 2***/ 
+#define INCA_IP_MBC_MBC_FS2                      ((volatile u32*)(INCA_IP_MBC+ 0x0048))
+#define INCA_IP_MBC_MBC_FS2_FS
+      
+/***Mailbox CPU Free Space of Buffer 3***/ 
+#define INCA_IP_MBC_MBC_FS3                      ((volatile u32*)(INCA_IP_MBC+ 0x0068))
+#define INCA_IP_MBC_MBC_FS3_FS
+      
+/***Mailbox CPU Data Available in Buffer 0***/ 
+#define INCA_IP_MBC_MBC_DA0                      ((volatile u32*)(INCA_IP_MBC+ 0x000C))
+#define INCA_IP_MBC_MBC_DA0_DA
+      
+/***Mailbox CPU Data Available in Buffer 1***/ 
+#define INCA_IP_MBC_MBC_DA1                      ((volatile u32*)(INCA_IP_MBC+ 0x002C))
+#define INCA_IP_MBC_MBC_DA1_DA
+      
+/***Mailbox CPU Data Available in Buffer 2***/ 
+#define INCA_IP_MBC_MBC_DA2                      ((volatile u32*)(INCA_IP_MBC+ 0x004C))
+#define INCA_IP_MBC_MBC_DA2_DA
+      
+/***Mailbox CPU Data Available in Buffer 3***/ 
+#define INCA_IP_MBC_MBC_DA3                      ((volatile u32*)(INCA_IP_MBC+ 0x006C))
+#define INCA_IP_MBC_MBC_DA3_DA
+      
+/***Mailbox CPU Input Absolute Pointer of Buffer 0***/ 
+#define INCA_IP_MBC_MBC_IABS0                    ((volatile u32*)(INCA_IP_MBC+ 0x0010))
+#define INCA_IP_MBC_MBC_IABS0_IABS
+      
+/***Mailbox CPU Input Absolute Pointer of Buffer 1***/ 
+#define INCA_IP_MBC_MBC_IABS1                    ((volatile u32*)(INCA_IP_MBC+ 0x0030))
+#define INCA_IP_MBC_MBC_IABS1_IABS
+      
+/***Mailbox CPU Input Absolute Pointer of Buffer 2***/ 
+#define INCA_IP_MBC_MBC_IABS2                    ((volatile u32*)(INCA_IP_MBC+ 0x0050))
+#define INCA_IP_MBC_MBC_IABS2_IABS
+      
+/***Mailbox CPU Input Absolute Pointer of Buffer 3***/ 
+#define INCA_IP_MBC_MBC_IABS3                    ((volatile u32*)(INCA_IP_MBC+ 0x0070))
+#define INCA_IP_MBC_MBC_IABS3_IABS
+      
+/***Mailbox CPU Input Temporary Pointer of Buffer 0***/ 
+#define INCA_IP_MBC_MBC_ITMP0                    ((volatile u32*)(INCA_IP_MBC+ 0x0014))
+#define INCA_IP_MBC_MBC_ITMP0_ITMP
+      
+/***Mailbox CPU Input Temporary Pointer of Buffer 1***/ 
+#define INCA_IP_MBC_MBC_ITMP1                    ((volatile u32*)(INCA_IP_MBC+ 0x0034))
+#define INCA_IP_MBC_MBC_ITMP1_ITMP
+      
+/***Mailbox CPU Input Temporary Pointer of Buffer 2***/ 
+#define INCA_IP_MBC_MBC_ITMP2                    ((volatile u32*)(INCA_IP_MBC+ 0x0054))
+#define INCA_IP_MBC_MBC_ITMP2_ITMP
+      
+/***Mailbox CPU Input Temporary Pointer of Buffer 3***/ 
+#define INCA_IP_MBC_MBC_ITMP3                    ((volatile u32*)(INCA_IP_MBC+ 0x0074))
+#define INCA_IP_MBC_MBC_ITMP3_ITMP
+      
+/***Mailbox CPU Output Absolute Pointer of Buffer 0***/ 
+#define INCA_IP_MBC_MBC_OABS0                    ((volatile u32*)(INCA_IP_MBC+ 0x0018))
+#define INCA_IP_MBC_MBC_OABS0_OABS
+      
+/***Mailbox CPU Output Absolute Pointer of Buffer 1***/ 
+#define INCA_IP_MBC_MBC_OABS1                    ((volatile u32*)(INCA_IP_MBC+ 0x0038))
+#define INCA_IP_MBC_MBC_OABS1_OABS
+      
+/***Mailbox CPU Output Absolute Pointer of Buffer 2***/ 
+#define INCA_IP_MBC_MBC_OABS2                    ((volatile u32*)(INCA_IP_MBC+ 0x0058))
+#define INCA_IP_MBC_MBC_OABS2_OABS
+      
+/***Mailbox CPU Output Absolute Pointer of Buffer 3***/ 
+#define INCA_IP_MBC_MBC_OABS3                    ((volatile u32*)(INCA_IP_MBC+ 0x0078))
+#define INCA_IP_MBC_MBC_OABS3_OABS
+      
+/***Mailbox CPU Output Temporary Pointer of Buffer 0***/ 
+#define INCA_IP_MBC_MBC_OTMP0                    ((volatile u32*)(INCA_IP_MBC+ 0x001C))
+#define INCA_IP_MBC_MBC_OTMP0_OTMP
+      
+/***Mailbox CPU Output Temporary Pointer of Buffer 1***/ 
+#define INCA_IP_MBC_MBC_OTMP1                    ((volatile u32*)(INCA_IP_MBC+ 0x003C))
+#define INCA_IP_MBC_MBC_OTMP1_OTMP
+      
+/***Mailbox CPU Output Temporary Pointer of Buffer 2***/ 
+#define INCA_IP_MBC_MBC_OTMP2                    ((volatile u32*)(INCA_IP_MBC+ 0x005C))
+#define INCA_IP_MBC_MBC_OTMP2_OTMP
+      
+/***Mailbox CPU Output Temporary Pointer of Buffer 3***/ 
+#define INCA_IP_MBC_MBC_OTMP3                    ((volatile u32*)(INCA_IP_MBC+ 0x007C))
+#define INCA_IP_MBC_MBC_OTMP3_OTMP
+      
+/***DSP Control Register***/ 
+#define INCA_IP_MBC_DCTRL                        ((volatile u32*)(INCA_IP_MBC+ 0x00A0))
+#define INCA_IP_MBC_DCTRL_BA                              (1 << 0)
+#define INCA_IP_MBC_DCTRL_BMOD (value)               (((( 1 << 3) - 1) & (value)) << 1)
+#define INCA_IP_MBC_DCTRL_IDL                              (1 << 4)
+#define INCA_IP_MBC_DCTRL_RES                              (1 << 15)
+      
+/***DSP Status Register***/ 
+#define INCA_IP_MBC_DSTA                         ((volatile u32*)(INCA_IP_MBC+ 0x00A4))
+#define INCA_IP_MBC_DSTA_IDLE                            (1 << 0)
+#define INCA_IP_MBC_DSTA_PD                              (1 << 1)
+      
+/***DSP Test 1 Register***/ 
+#define INCA_IP_MBC_DTST1                        ((volatile u32*)(INCA_IP_MBC+ 0x00A8))
+#define INCA_IP_MBC_DTST1_ABORT                          (1 << 0)
+#define INCA_IP_MBC_DTST1_HWF32                          (1 << 1)
+#define INCA_IP_MBC_DTST1_HWF4M                          (1 << 2)
+#define INCA_IP_MBC_DTST1_HWFOP                          (1 << 3)		
+         
+/***********************************************************************/
+/*  Module      :  Switch register address and bits                    */
+/***********************************************************************/
+         
+#define INCA_IP_Switch                       (0xBF104000)
+/***********************************************************************/   
+
+      
+/***Unknown Destination Register***/ 
+#define INCA_IP_Switch_UN_DEST                      ((volatile u32*)(INCA_IP_Switch+ 0x0000))
+#define INCA_IP_Switch_UN_DEST_CB                              (1 << 8)
+#define INCA_IP_Switch_UN_DEST_LB                              (1 << 7)
+#define INCA_IP_Switch_UN_DEST_PB                              (1 << 6)
+#define INCA_IP_Switch_UN_DEST_CM                              (1 << 5)
+#define INCA_IP_Switch_UN_DEST_LM                              (1 << 4)
+#define INCA_IP_Switch_UN_DEST_PM                              (1 << 3)
+#define INCA_IP_Switch_UN_DEST_CU                              (1 << 2)
+#define INCA_IP_Switch_UN_DEST_LU                              (1 << 1)
+#define INCA_IP_Switch_UN_DEST_PU                              (1 << 0)
+      
+/***VLAN Control Register***/ 
+#define INCA_IP_Switch_VLAN_CTRL                    ((volatile u32*)(INCA_IP_Switch+ 0x0004))
+#define INCA_IP_Switch_VLAN_CTRL_SC                              (1 << 6)
+#define INCA_IP_Switch_VLAN_CTRL_SL                              (1 << 5)
+#define INCA_IP_Switch_VLAN_CTRL_SP                              (1 << 4)
+#define INCA_IP_Switch_VLAN_CTRL_TC                              (1 << 3)
+#define INCA_IP_Switch_VLAN_CTRL_TL                              (1 << 2)
+#define INCA_IP_Switch_VLAN_CTRL_TP                              (1 << 1)
+#define INCA_IP_Switch_VLAN_CTRL_VA                              (1 << 0)
+      
+/***PC VLAN Configuration Register***/ 
+#define INCA_IP_Switch_PC_VLAN                      ((volatile u32*)(INCA_IP_Switch+ 0x0008))
+#define INCA_IP_Switch_PC_VLAN_PRI (value)                (((( 1 << 3) - 1) & (value)) << 12)
+#define INCA_IP_Switch_PC_VLAN_VLAN_ID (value)            (((( 1 << 12) - 1) & (value)) << 0)
+      
+/***LAN VLAN Configuration Register***/ 
+#define INCA_IP_Switch_LAN_VLAN                    ((volatile u32*)(INCA_IP_Switch+ 0x000C))
+#define INCA_IP_Switch_LAN_VLAN_PRI (value)                (((( 1 << 3) - 1) & (value)) << 12)
+#define INCA_IP_Switch_LAN_VLAN_VLAN_ID (value)            (((( 1 << 12) - 1) & (value)) << 0)
+      
+/***CPU VLAN Configuration Register***/ 
+#define INCA_IP_Switch_CPU_VLAN                    ((volatile u32*)(INCA_IP_Switch+ 0x0010))
+#define INCA_IP_Switch_CPU_VLAN_PRI (value)                (((( 1 << 3) - 1) & (value)) << 12)
+#define INCA_IP_Switch_CPU_VLAN_VLAN_ID (value)            (((( 1 << 12) - 1) & (value)) << 0)
+      
+/***Priority CoS Mapping Register***/ 
+#define INCA_IP_Switch_PRI_CoS                      ((volatile u32*)(INCA_IP_Switch+ 0x0014))
+#define INCA_IP_Switch_PRI_CoS_P7                              (1 << 7)
+#define INCA_IP_Switch_PRI_CoS_P6                              (1 << 6)
+#define INCA_IP_Switch_PRI_CoS_P5                              (1 << 5)
+#define INCA_IP_Switch_PRI_CoS_P4                              (1 << 4)
+#define INCA_IP_Switch_PRI_CoS_P3                              (1 << 3)
+#define INCA_IP_Switch_PRI_CoS_P2                              (1 << 2)
+#define INCA_IP_Switch_PRI_CoS_P1                              (1 << 1)
+#define INCA_IP_Switch_PRI_CoS_P0                              (1 << 0)
+      
+/***Spanning Tree Port Status Register***/ 
+#define INCA_IP_Switch_ST_PT                        ((volatile u32*)(INCA_IP_Switch+ 0x0018))
+#define INCA_IP_Switch_ST_PT_CPS (value)                (((( 1 << 2) - 1) & (value)) << 4)
+#define INCA_IP_Switch_ST_PT_LPS (value)                (((( 1 << 2) - 1) & (value)) << 2)
+#define INCA_IP_Switch_ST_PT_PPS (value)                (((( 1 << 2) - 1) & (value)) << 0)
+      
+/***ARL Control Register***/ 
+#define INCA_IP_Switch_ARL_CTL                      ((volatile u32*)(INCA_IP_Switch+ 0x001C))
+#define INCA_IP_Switch_ARL_CTL_CHCC                            (1 << 15)
+#define INCA_IP_Switch_ARL_CTL_CHCL                            (1 << 14)
+#define INCA_IP_Switch_ARL_CTL_CHCP                            (1 << 13)
+#define INCA_IP_Switch_ARL_CTL_CC                              (1 << 12)
+#define INCA_IP_Switch_ARL_CTL_CL                              (1 << 11)
+#define INCA_IP_Switch_ARL_CTL_CP                              (1 << 10)
+#define INCA_IP_Switch_ARL_CTL_CG                              (1 << 9)
+#define INCA_IP_Switch_ARL_CTL_PS                              (1 << 8)
+#define INCA_IP_Switch_ARL_CTL_MRO                              (1 << 7)
+#define INCA_IP_Switch_ARL_CTL_SRC                              (1 << 6)
+#define INCA_IP_Switch_ARL_CTL_ATS                              (1 << 5)
+#define INCA_IP_Switch_ARL_CTL_AGE_TICK_SEL (value)       (((( 1 << 3) - 1) & (value)) << 2)
+#define INCA_IP_Switch_ARL_CTL_MAF                              (1 << 1)
+#define INCA_IP_Switch_ARL_CTL_ENL                              (1 << 0)
+#define INCA_IP_Switch_ARL_CTL_Res (value)                (((( 1 << 19) - 1) & (value)) << 13)
+      
+/***CPU Access Control Register***/ 
+#define INCA_IP_Switch_CPU_ACTL                    ((volatile u32*)(INCA_IP_Switch+ 0x0020))
+#define INCA_IP_Switch_CPU_ACTL_RA                              (1 << 31)
+#define INCA_IP_Switch_CPU_ACTL_RW                              (1 << 30)
+#define INCA_IP_Switch_CPU_ACTL_Res (value)                (((( 1 << 21) - 1) & (value)) << 9)
+#define INCA_IP_Switch_CPU_ACTL_AVA                              (1 << 8)
+#define INCA_IP_Switch_CPU_ACTL_IDX (value)                (((( 1 << 8) - 1) & (value)) << 0)
+      
+/***CPU Access Data Register 1***/ 
+#define INCA_IP_Switch_DATA1                        ((volatile u32*)(INCA_IP_Switch+ 0x0024))
+#define INCA_IP_Switch_DATA1_Data (value)               (((( 1 << 24) - 1) & (value)) << 0)
+      
+/***CPU Access Data Register 2***/ 
+#define INCA_IP_Switch_DATA2                        ((volatile u32*)(INCA_IP_Switch+ 0x0028))
+#define INCA_IP_Switch_DATA2_Data
+      
+/***CPU Port Control Register***/ 
+#define INCA_IP_Switch_CPU_PCTL                    ((volatile u32*)(INCA_IP_Switch+ 0x002C))
+#define INCA_IP_Switch_CPU_PCTL_DA_PORTS (value)          (((( 1 << 3) - 1) & (value)) << 11)
+#define INCA_IP_Switch_CPU_PCTL_DAC                              (1 << 10)
+#define INCA_IP_Switch_CPU_PCTL_MA_STATE (value)          (((( 1 << 3) - 1) & (value)) << 7)
+#define INCA_IP_Switch_CPU_PCTL_MAM                              (1 << 6)
+#define INCA_IP_Switch_CPU_PCTL_MA_Ports (value)          (((( 1 << 3) - 1) & (value)) << 3)
+#define INCA_IP_Switch_CPU_PCTL_MAC                              (1 << 2)
+#define INCA_IP_Switch_CPU_PCTL_EML                              (1 << 1)
+#define INCA_IP_Switch_CPU_PCTL_EDL                              (1 << 0)
+#define INCA_IP_Switch_CPU_PCTL_Res (value)                (((( 1 << 18) - 1) & (value)) << 14)
+      
+/***DSCP CoS Mapping Register 1***/ 
+#define INCA_IP_Switch_DSCP_COS1                    ((volatile u32*)(INCA_IP_Switch+ 0x0030))
+#define INCA_IP_Switch_DSCP_COS1_DSCP
+      
+/***DSCP CoS Mapping Register 1***/ 
+#define INCA_IP_Switch_DSCP_COS2                    ((volatile u32*)(INCA_IP_Switch+ 0x0034))
+#define INCA_IP_Switch_DSCP_COS2_DSCP
+      
+/***PC WFQ Control Register***/ 
+#define INCA_IP_Switch_PC_WFQ_CTL                   ((volatile u32*)(INCA_IP_Switch+ 0x0080))
+#define INCA_IP_Switch_PC_WFQ_CTL_P1                              (1 << 9)
+#define INCA_IP_Switch_PC_WFQ_CTL_P0                              (1 << 8)
+#define INCA_IP_Switch_PC_WFQ_CTL_WT1 (value)                (((( 1 << 3) - 1) & (value)) << 5)
+#define INCA_IP_Switch_PC_WFQ_CTL_WT0 (value)                (((( 1 << 3) - 1) & (value)) << 2)
+#define INCA_IP_Switch_PC_WFQ_CTL_SCH_SEL (value)            (((( 1 << 2) - 1) & (value)) << 0)
+      
+/***PC TX Control Register***/ 
+#define INCA_IP_Switch_PC_TX_CTL                    ((volatile u32*)(INCA_IP_Switch+ 0x0084))
+#define INCA_IP_Switch_PC_TX_CTL_ELR                              (1 << 1)
+#define INCA_IP_Switch_PC_TX_CTL_EER                              (1 << 0)
+      
+/***LAN WFQ Control Register***/ 
+#define INCA_IP_Switch_LAN_WFQ_CTL                  ((volatile u32*)(INCA_IP_Switch+ 0x0100))
+#define INCA_IP_Switch_LAN_WFQ_CTL_P1                              (1 << 9)
+#define INCA_IP_Switch_LAN_WFQ_CTL_P0                              (1 << 8)
+#define INCA_IP_Switch_LAN_WFQ_CTL_WT1 (value)                (((( 1 << 3) - 1) & (value)) << 5)
+#define INCA_IP_Switch_LAN_WFQ_CTL_WT0 (value)                (((( 1 << 3) - 1) & (value)) << 2)
+#define INCA_IP_Switch_LAN_WFQ_CTL_SCH_SEL (value)            (((( 1 << 2) - 1) & (value)) << 0)
+      
+/***LAN TX Control Register***/ 
+#define INCA_IP_Switch_LAN_TX_CTL                   ((volatile u32*)(INCA_IP_Switch+ 0x0104))
+#define INCA_IP_Switch_LAN_TX_CTL_ELR                              (1 << 1)
+#define INCA_IP_Switch_LAN_TX_CTL_EER                              (1 << 0)
+      
+/***CPU WFQ Control Register***/ 
+#define INCA_IP_Switch_CPU_WFQ_CTL                  ((volatile u32*)(INCA_IP_Switch+ 0x0180))
+#define INCA_IP_Switch_CPU_WFQ_CTL_P1                              (1 << 9)
+#define INCA_IP_Switch_CPU_WFQ_CTL_P0                              (1 << 8)
+#define INCA_IP_Switch_CPU_WFQ_CTL_WT1 (value)                (((( 1 << 3) - 1) & (value)) << 5)
+#define INCA_IP_Switch_CPU_WFQ_CTL_WT0 (value)                (((( 1 << 3) - 1) & (value)) << 2)
+#define INCA_IP_Switch_CPU_WFQ_CTL_SCH_SEL (value)            (((( 1 << 2) - 1) & (value)) << 0)
+      
+/***PM PC RX Watermark Register***/ 
+#define INCA_IP_Switch_PC_WM                        ((volatile u32*)(INCA_IP_Switch+ 0x0200))
+#define INCA_IP_Switch_PC_WM_RX_WM1 (value)             (((( 1 << 8) - 1) & (value)) << 24)
+#define INCA_IP_Switch_PC_WM_RX_WM2 (value)             (((( 1 << 8) - 1) & (value)) << 16)
+#define INCA_IP_Switch_PC_WM_RX_WM3 (value)             (((( 1 << 8) - 1) & (value)) << 8)
+#define INCA_IP_Switch_PC_WM_RX_WM4 (value)             (((( 1 << 8) - 1) & (value)) << 0)
+      
+/***PM LAN RX Watermark Register***/ 
+#define INCA_IP_Switch_LAN_WM                       ((volatile u32*)(INCA_IP_Switch+ 0x0204))
+#define INCA_IP_Switch_LAN_WM_RX_WM1 (value)             (((( 1 << 8) - 1) & (value)) << 24)
+#define INCA_IP_Switch_LAN_WM_RX_WM2 (value)             (((( 1 << 8) - 1) & (value)) << 16)
+#define INCA_IP_Switch_LAN_WM_RX_WM3 (value)             (((( 1 << 8) - 1) & (value)) << 8)
+#define INCA_IP_Switch_LAN_WM_RX_WM4 (value)             (((( 1 << 8) - 1) & (value)) << 0)
+      
+/***PM CPU RX Watermark Register***/ 
+#define INCA_IP_Switch_CPU_WM                       ((volatile u32*)(INCA_IP_Switch+ 0x0208))
+#define INCA_IP_Switch_CPU_WM_RX_WM1 (value)             (((( 1 << 8) - 1) & (value)) << 24)
+#define INCA_IP_Switch_CPU_WM_RX_WM2 (value)             (((( 1 << 8) - 1) & (value)) << 16)
+#define INCA_IP_Switch_CPU_WM_RX_WM3 (value)             (((( 1 << 8) - 1) & (value)) << 8)
+#define INCA_IP_Switch_CPU_WM_RX_WM4 (value)             (((( 1 << 8) - 1) & (value)) << 0)
+      
+/***PM CPU RX Watermark Register***/ 
+#define INCA_IP_Switch_GBL_WM                       ((volatile u32*)(INCA_IP_Switch+ 0x020C))
+#define INCA_IP_Switch_GBL_WM_GBL_RX_WM1 (value)         (((( 1 << 8) - 1) & (value)) << 24)
+#define INCA_IP_Switch_GBL_WM_GBL_RX_WM2 (value)         (((( 1 << 8) - 1) & (value)) << 16)
+#define INCA_IP_Switch_GBL_WM_GBL_RX_WM3 (value)         (((( 1 << 8) - 1) & (value)) << 8)
+#define INCA_IP_Switch_GBL_WM_GBL_RX_WM4 (value)         (((( 1 << 8) - 1) & (value)) << 0)
+      
+/***PM Control Register***/ 
+#define INCA_IP_Switch_PM_CTL                       ((volatile u32*)(INCA_IP_Switch+ 0x0210))
+#define INCA_IP_Switch_PM_CTL_GDN                              (1 << 3)
+#define INCA_IP_Switch_PM_CTL_CDN                              (1 << 2)
+#define INCA_IP_Switch_PM_CTL_LDN                              (1 << 1)
+#define INCA_IP_Switch_PM_CTL_PDN                              (1 << 0)
+      
+/***PM Header Control Register***/ 
+#define INCA_IP_Switch_PMAC_HD_CTL                  ((volatile u32*)(INCA_IP_Switch+ 0x0280))
+#define INCA_IP_Switch_PMAC_HD_CTL_RL2                              (1 << 21)
+#define INCA_IP_Switch_PMAC_HD_CTL_RC                              (1 << 20)
+#define INCA_IP_Switch_PMAC_HD_CTL_CM                              (1 << 19)
+#define INCA_IP_Switch_PMAC_HD_CTL_CV                              (1 << 18)
+#define INCA_IP_Switch_PMAC_HD_CTL_TYPE_LEN (value)          (((( 1 << 16) - 1) & (value)) << 2)
+#define INCA_IP_Switch_PMAC_HD_CTL_TAG                              (1 << 1)
+#define INCA_IP_Switch_PMAC_HD_CTL_ADD                              (1 << 0)
+      
+/***PM Source Address Register 1***/ 
+#define INCA_IP_Switch_PMAC_SA1                    ((volatile u32*)(INCA_IP_Switch+ 0x0284))
+#define INCA_IP_Switch_PMAC_SA1_SA_47_32 (value)          (((( 1 << 16) - 1) & (value)) << 0)
+      
+/***PM Source Address Register 2***/ 
+#define INCA_IP_Switch_PMAC_SA2                    ((volatile u32*)(INCA_IP_Switch+ 0x0288))
+#define INCA_IP_Switch_PMAC_SA2_SA_31_0
+      
+/***PM Dest Address Register 1***/ 
+#define INCA_IP_Switch_PMAC_DA1                    ((volatile u32*)(INCA_IP_Switch+ 0x028C))
+#define INCA_IP_Switch_PMAC_DA1_DA_47_32 (value)          (((( 1 << 16) - 1) & (value)) << 0)
+      
+/***PM Dest Address Register 2***/ 
+#define INCA_IP_Switch_PMAC_DA2                    ((volatile u32*)(INCA_IP_Switch+ 0x0290))
+#define INCA_IP_Switch_PMAC_DA2_DA_31_0
+      
+/***PM VLAN Register***/ 
+#define INCA_IP_Switch_PMAC_VLAN                    ((volatile u32*)(INCA_IP_Switch+ 0x0294))
+#define INCA_IP_Switch_PMAC_VLAN_PRI (value)                (((( 1 << 3) - 1) & (value)) << 13)
+#define INCA_IP_Switch_PMAC_VLAN_CFI                              (1 << 12)
+#define INCA_IP_Switch_PMAC_VLAN_VLANID (value)             (((( 1 << 12) - 1) & (value)) << 0)
+      
+/***PM TX IPG Counter Register***/ 
+#define INCA_IP_Switch_PMAC_TX_IPG                  ((volatile u32*)(INCA_IP_Switch+ 0x0298))
+#define INCA_IP_Switch_PMAC_TX_IPG_IPGCNT (value)             (((( 1 << 8) - 1) & (value)) << 0)
+      
+/***PM RX IPG Counter Register***/ 
+#define INCA_IP_Switch_PMAC_RX_IPG                  ((volatile u32*)(INCA_IP_Switch+ 0x029C))
+#define INCA_IP_Switch_PMAC_RX_IPG_IPGCNT (value)             (((( 1 << 8) - 1) & (value)) << 0)
+      
+/***Mirror Register***/ 
+#define INCA_IP_Switch_MRR                          ((volatile u32*)(INCA_IP_Switch+ 0x0300))
+#define INCA_IP_Switch_MRR_MRR (value)                (((( 1 << 2) - 1) & (value)) << 6)
+#define INCA_IP_Switch_MRR_EC                              (1 << 5)
+#define INCA_IP_Switch_MRR_EL                              (1 << 4)
+#define INCA_IP_Switch_MRR_EP                              (1 << 3)
+#define INCA_IP_Switch_MRR_IC                              (1 << 2)
+#define INCA_IP_Switch_MRR_IL                              (1 << 1)
+#define INCA_IP_Switch_MRR_IP                              (1 << 0)
+      
+/***Packet Length Register***/ 
+#define INCA_IP_Switch_PKT_LEN                      ((volatile u32*)(INCA_IP_Switch+ 0x0304))
+#define INCA_IP_Switch_PKT_LEN_ADD                              (1 << 11)
+#define INCA_IP_Switch_PKT_LEN_MAX_PKT_LEN (value)        (((( 1 << 11) - 1) & (value)) << 0)
+      
+/***MDIO Access Register***/ 
+#define INCA_IP_Switch_MDIO_ACC                    ((volatile u32*)(INCA_IP_Switch+ 0x0480))
+#define INCA_IP_Switch_MDIO_ACC_RA                              (1 << 31)
+#define INCA_IP_Switch_MDIO_ACC_RW                              (1 << 30)
+#define INCA_IP_Switch_MDIO_ACC_PHY_ADDR (value)          (((( 1 << 5) - 1) & (value)) << 21)
+#define INCA_IP_Switch_MDIO_ACC_REG_ADDR (value)          (((( 1 << 5) - 1) & (value)) << 16)
+#define INCA_IP_Switch_MDIO_ACC_PHY_DATA (value)          (((( 1 << 16) - 1) & (value)) << 0)
+      
+/***Ethernet PHY Register***/ 
+#define INCA_IP_Switch_EPHY                         ((volatile u32*)(INCA_IP_Switch+ 0x0484))
+#define INCA_IP_Switch_EPHY_SL                              (1 << 7)
+#define INCA_IP_Switch_EPHY_SP                              (1 << 6)
+#define INCA_IP_Switch_EPHY_LL                              (1 << 5)
+#define INCA_IP_Switch_EPHY_LP                              (1 << 4)
+#define INCA_IP_Switch_EPHY_DL                              (1 << 3)
+#define INCA_IP_Switch_EPHY_DP                              (1 << 2)
+#define INCA_IP_Switch_EPHY_PL                              (1 << 1)
+#define INCA_IP_Switch_EPHY_PP                              (1 << 0)
+      
+/***Pause Write Enable Register***/ 
+#define INCA_IP_Switch_PWR_EN                       ((volatile u32*)(INCA_IP_Switch+ 0x0488))
+#define INCA_IP_Switch_PWR_EN_PL                              (1 << 1)
+#define INCA_IP_Switch_PWR_EN_PP                              (1 << 0)
+      
+/***MDIO Configuration Register***/ 
+#define INCA_IP_Switch_MDIO_CFG                    ((volatile u32*)(INCA_IP_Switch+ 0x048C))
+#define INCA_IP_Switch_MDIO_CFG_MDS (value)                (((( 1 << 2) - 1) & (value)) << 14)
+#define INCA_IP_Switch_MDIO_CFG_PHY_LAN_ADDR (value)       (((( 1 << 5) - 1) & (value)) << 9)
+#define INCA_IP_Switch_MDIO_CFG_PHY_PC_ADDR (value)        (((( 1 << 5) - 1) & (value)) << 4)
+#define INCA_IP_Switch_MDIO_CFG_UEP                              (1 << 3)
+#define INCA_IP_Switch_MDIO_CFG_PS                              (1 << 2)
+#define INCA_IP_Switch_MDIO_CFG_PT                              (1 << 1)
+#define INCA_IP_Switch_MDIO_CFG_UMM                              (1 << 0)
+      
+/***Clock Configuration Register***/ 
+#define INCA_IP_Switch_CLK_CFG                      ((volatile u32*)(INCA_IP_Switch+ 0x0500))
+#define INCA_IP_Switch_CLK_CFG_ARL_ID                        (1 << 9)
+#define INCA_IP_Switch_CLK_CFG_CPU_ID                        (1 << 8)
+#define INCA_IP_Switch_CLK_CFG_LAN_ID                        (1 << 7)
+#define INCA_IP_Switch_CLK_CFG_PC_ID                          (1 << 6)
+#define INCA_IP_Switch_CLK_CFG_SE_ID                          (1 << 5)		
+         
+/***********************************************************************/
+/*  Module      :  SSC1 register address and bits                      */
+/***********************************************************************/
+         
+#define INCA_IP_SSC1                         (0xB8000500)
+/***********************************************************************/   
+
+      
+/***Control Register (Programming Mode)***/ 
+#define INCA_IP_SSC1_SCC_CON_PRG                  ((volatile u32*)(INCA_IP_SSC1+ 0x0010))
+#define INCA_IP_SSC1_SCC_CON_PRG_EN                              (1 << 15)
+#define INCA_IP_SSC1_SCC_CON_PRG_MS                              (1 << 14)
+#define INCA_IP_SSC1_SCC_CON_PRG_AREN                            (1 << 12)
+#define INCA_IP_SSC1_SCC_CON_PRG_BEN                              (1 << 11)
+#define INCA_IP_SSC1_SCC_CON_PRG_PEN                              (1 << 10)
+#define INCA_IP_SSC1_SCC_CON_PRG_REN                              (1 << 9)
+#define INCA_IP_SSC1_SCC_CON_PRG_TEN                              (1 << 8)
+#define INCA_IP_SSC1_SCC_CON_PRG_LB                              (1 << 7)
+#define INCA_IP_SSC1_SCC_CON_PRG_PO                              (1 << 6)
+#define INCA_IP_SSC1_SCC_CON_PRG_PH                              (1 << 5)
+#define INCA_IP_SSC1_SCC_CON_PRG_HB                              (1 << 4)
+#define INCA_IP_SSC1_SCC_CON_PRG_BM (value)                (((( 1 << 4) - 1) & (value)) << 0)
+      
+/***SCC Control Register (Operating Mode)***/ 
+#define INCA_IP_SSC1_SCC_CON_OPR                  ((volatile u32*)(INCA_IP_SSC1+ 0x0010))
+#define INCA_IP_SSC1_SCC_CON_OPR_EN                              (1 << 15)
+#define INCA_IP_SSC1_SCC_CON_OPR_MS                              (1 << 14)
+#define INCA_IP_SSC1_SCC_CON_OPR_BSY                              (1 << 12)
+#define INCA_IP_SSC1_SCC_CON_OPR_BE                              (1 << 11)
+#define INCA_IP_SSC1_SCC_CON_OPR_PE                              (1 << 10)
+#define INCA_IP_SSC1_SCC_CON_OPR_RE                              (1 << 9)
+#define INCA_IP_SSC1_SCC_CON_OPR_TE                              (1 << 8)
+#define INCA_IP_SSC1_SCC_CON_OPR_BC (value)                (((( 1 << 4) - 1) & (value)) << 0)
+      
+/***SSC Write Hardware Modified Control Register***/ 
+#define INCA_IP_SSC1_SSC_WHBCON                   ((volatile u32*)(INCA_IP_SSC1+ 0x0040))
+#define INCA_IP_SSC1_SSC_WHBCON_SETBE                          (1 << 15)
+#define INCA_IP_SSC1_SSC_WHBCON_SETPE                          (1 << 14)
+#define INCA_IP_SSC1_SSC_WHBCON_SETRE                          (1 << 13)
+#define INCA_IP_SSC1_SSC_WHBCON_SETTE                          (1 << 12)
+#define INCA_IP_SSC1_SSC_WHBCON_CLRBE                          (1 << 11)
+#define INCA_IP_SSC1_SSC_WHBCON_CLRPE                          (1 << 10)
+#define INCA_IP_SSC1_SSC_WHBCON_CLRRE                          (1 << 9)
+#define INCA_IP_SSC1_SSC_WHBCON_CLRTE                          (1 << 8)
+      
+/***SSC Baudrate Timer Reload Register***/ 
+#define INCA_IP_SSC1_SSC_BR                       ((volatile u32*)(INCA_IP_SSC1+ 0x0014))
+#define INCA_IP_SSC1_SSC_BR_BR_VALUE (value)          (((( 1 << 16) - 1) & (value)) << 0)
+      
+/***SSC Transmitter Buffer Register***/ 
+#define INCA_IP_SSC1_SSC_TB                       ((volatile u32*)(INCA_IP_SSC1+ 0x0020))
+#define INCA_IP_SSC1_SSC_TB_TB_VALUE (value)          (((( 1 << 16) - 1) & (value)) << 0)
+      
+/***SSC Receiver Buffer Register***/ 
+#define INCA_IP_SSC1_SSC_RB                       ((volatile u32*)(INCA_IP_SSC1+ 0x0024))
+#define INCA_IP_SSC1_SSC_RB_RB_VALUE (value)          (((( 1 << 16) - 1) & (value)) << 0)
+      
+/***SSC Receive FIFO Control Register***/ 
+#define INCA_IP_SSC1_SSC_RXFCON                   ((volatile u32*)(INCA_IP_SSC1+ 0x0030))
+#define INCA_IP_SSC1_SSC_RXFCON_RXFITL (value)             (((( 1 << 6) - 1) & (value)) << 8)
+#define INCA_IP_SSC1_SSC_RXFCON_RXTMEN                        (1 << 2)
+#define INCA_IP_SSC1_SSC_RXFCON_RXFLU                          (1 << 1)
+#define INCA_IP_SSC1_SSC_RXFCON_RXFEN                          (1 << 0)
+      
+/***SSC Transmit FIFO Control Register***/ 
+#define INCA_IP_SSC1_SSC_TXFCON                   ((volatile u32*)(INCA_IP_SSC1+ 0x0034))
+#define INCA_IP_SSC1_SSC_TXFCON_RXFITL (value)             (((( 1 << 6) - 1) & (value)) << 8)
+#define INCA_IP_SSC1_SSC_TXFCON_TXTMEN                        (1 << 2)
+#define INCA_IP_SSC1_SSC_TXFCON_TXFLU                          (1 << 1)
+#define INCA_IP_SSC1_SSC_TXFCON_TXFEN                          (1 << 0)
+      
+/***SSC FIFO Status Register***/ 
+#define INCA_IP_SSC1_SSC_FSTAT                    ((volatile u32*)(INCA_IP_SSC1+ 0x0038))
+#define INCA_IP_SSC1_SSC_FSTAT_TXFFL (value)              (((( 1 << 6) - 1) & (value)) << 8)
+#define INCA_IP_SSC1_SSC_FSTAT_RXFFL (value)              (((( 1 << 6) - 1) & (value)) << 0)
+      
+/***SSC Clock Control Register***/ 
+#define INCA_IP_SSC1_SSC_CLC                      ((volatile u32*)(INCA_IP_SSC1+ 0x0000))
+#define INCA_IP_SSC1_SSC_CLC_RMC (value)                (((( 1 << 8) - 1) & (value)) << 8)
+#define INCA_IP_SSC1_SSC_CLC_DISS                            (1 << 1)
+#define INCA_IP_SSC1_SSC_CLC_DISR                            (1 << 0)		
+         
+/***********************************************************************/
+/*  Module      :  SSC2 register address and bits                      */
+/***********************************************************************/
+         
+#define INCA_IP_SSC2                         (0xB8000600)
+/***********************************************************************/   
+
+      
+/***Control Register (Programming Mode)***/ 
+#define INCA_IP_SSC2_SCC_CON_PRG                  ((volatile u32*)(INCA_IP_SSC2+ 0x0010))
+#define INCA_IP_SSC2_SCC_CON_PRG_EN                              (1 << 15)
+#define INCA_IP_SSC2_SCC_CON_PRG_MS                              (1 << 14)
+#define INCA_IP_SSC2_SCC_CON_PRG_AREN                            (1 << 12)
+#define INCA_IP_SSC2_SCC_CON_PRG_BEN                              (1 << 11)
+#define INCA_IP_SSC2_SCC_CON_PRG_PEN                              (1 << 10)
+#define INCA_IP_SSC2_SCC_CON_PRG_REN                              (1 << 9)
+#define INCA_IP_SSC2_SCC_CON_PRG_TEN                              (1 << 8)
+#define INCA_IP_SSC2_SCC_CON_PRG_LB                              (1 << 7)
+#define INCA_IP_SSC2_SCC_CON_PRG_PO                              (1 << 6)
+#define INCA_IP_SSC2_SCC_CON_PRG_PH                              (1 << 5)
+#define INCA_IP_SSC2_SCC_CON_PRG_HB                              (1 << 4)
+#define INCA_IP_SSC2_SCC_CON_PRG_BM (value)                (((( 1 << 4) - 1) & (value)) << 0)
+      
+/***SCC Control Register (Operating Mode)***/ 
+#define INCA_IP_SSC2_SCC_CON_OPR                  ((volatile u32*)(INCA_IP_SSC2+ 0x0010))
+#define INCA_IP_SSC2_SCC_CON_OPR_EN                              (1 << 15)
+#define INCA_IP_SSC2_SCC_CON_OPR_MS                              (1 << 14)
+#define INCA_IP_SSC2_SCC_CON_OPR_BSY                              (1 << 12)
+#define INCA_IP_SSC2_SCC_CON_OPR_BE                              (1 << 11)
+#define INCA_IP_SSC2_SCC_CON_OPR_PE                              (1 << 10)
+#define INCA_IP_SSC2_SCC_CON_OPR_RE                              (1 << 9)
+#define INCA_IP_SSC2_SCC_CON_OPR_TE                              (1 << 8)
+#define INCA_IP_SSC2_SCC_CON_OPR_BC (value)                (((( 1 << 4) - 1) & (value)) << 0)
+      
+/***SSC Write Hardware Modified Control Register***/ 
+#define INCA_IP_SSC2_SSC_WHBCON                   ((volatile u32*)(INCA_IP_SSC2+ 0x0040))
+#define INCA_IP_SSC2_SSC_WHBCON_SETBE                          (1 << 15)
+#define INCA_IP_SSC2_SSC_WHBCON_SETPE                          (1 << 14)
+#define INCA_IP_SSC2_SSC_WHBCON_SETRE                          (1 << 13)
+#define INCA_IP_SSC2_SSC_WHBCON_SETTE                          (1 << 12)
+#define INCA_IP_SSC2_SSC_WHBCON_CLRBE                          (1 << 11)
+#define INCA_IP_SSC2_SSC_WHBCON_CLRPE                          (1 << 10)
+#define INCA_IP_SSC2_SSC_WHBCON_CLRRE                          (1 << 9)
+#define INCA_IP_SSC2_SSC_WHBCON_CLRTE                          (1 << 8)
+      
+/***SSC Baudrate Timer Reload Register***/ 
+#define INCA_IP_SSC2_SSC_BR                       ((volatile u32*)(INCA_IP_SSC2+ 0x0014))
+#define INCA_IP_SSC2_SSC_BR_BR_VALUE (value)          (((( 1 << 16) - 1) & (value)) << 0)
+      
+/***SSC Transmitter Buffer Register***/ 
+#define INCA_IP_SSC2_SSC_TB                       ((volatile u32*)(INCA_IP_SSC2+ 0x0020))
+#define INCA_IP_SSC2_SSC_TB_TB_VALUE (value)          (((( 1 << 16) - 1) & (value)) << 0)
+      
+/***SSC Receiver Buffer Register***/ 
+#define INCA_IP_SSC2_SSC_RB                       ((volatile u32*)(INCA_IP_SSC2+ 0x0024))
+#define INCA_IP_SSC2_SSC_RB_RB_VALUE (value)          (((( 1 << 16) - 1) & (value)) << 0)
+      
+/***SSC Receive FIFO Control Register***/ 
+#define INCA_IP_SSC2_SSC_RXFCON                   ((volatile u32*)(INCA_IP_SSC2+ 0x0030))
+#define INCA_IP_SSC2_SSC_RXFCON_RXFITL (value)             (((( 1 << 6) - 1) & (value)) << 8)
+#define INCA_IP_SSC2_SSC_RXFCON_RXTMEN                        (1 << 2)
+#define INCA_IP_SSC2_SSC_RXFCON_RXFLU                          (1 << 1)
+#define INCA_IP_SSC2_SSC_RXFCON_RXFEN                          (1 << 0)
+      
+/***SSC Transmit FIFO Control Register***/ 
+#define INCA_IP_SSC2_SSC_TXFCON                   ((volatile u32*)(INCA_IP_SSC2+ 0x0034))
+#define INCA_IP_SSC2_SSC_TXFCON_RXFITL (value)             (((( 1 << 6) - 1) & (value)) << 8)
+#define INCA_IP_SSC2_SSC_TXFCON_TXTMEN                        (1 << 2)
+#define INCA_IP_SSC2_SSC_TXFCON_TXFLU                          (1 << 1)
+#define INCA_IP_SSC2_SSC_TXFCON_TXFEN                          (1 << 0)
+      
+/***SSC FIFO Status Register***/ 
+#define INCA_IP_SSC2_SSC_FSTAT                    ((volatile u32*)(INCA_IP_SSC2+ 0x0038))
+#define INCA_IP_SSC2_SSC_FSTAT_TXFFL (value)              (((( 1 << 6) - 1) & (value)) << 8)
+#define INCA_IP_SSC2_SSC_FSTAT_RXFFL (value)              (((( 1 << 6) - 1) & (value)) << 0)
+      
+/***SSC Clock Control Register***/ 
+#define INCA_IP_SSC2_SSC_CLC                      ((volatile u32*)(INCA_IP_SSC2+ 0x0000))
+#define INCA_IP_SSC2_SSC_CLC_RMC (value)                (((( 1 << 8) - 1) & (value)) << 8)
+#define INCA_IP_SSC2_SSC_CLC_DISS                            (1 << 1)
+#define INCA_IP_SSC2_SSC_CLC_DISR                            (1 << 0)		
+         
+/***********************************************************************/
+/*  Module      :  EBU register address and bits                       */
+/***********************************************************************/
+         
+#define INCA_IP_EBU                          (0xB8000200)
+/***********************************************************************/   
+
+      
+/***EBU Clock Control Register***/ 
+#define INCA_IP_EBU_EBU_CLC                      ((volatile u32*)(INCA_IP_EBU+ 0x0000))
+#define INCA_IP_EBU_EBU_CLC_DISS                            (1 << 1)
+#define INCA_IP_EBU_EBU_CLC_DISR                            (1 << 0)
+      
+/***EBU Global Control Register***/ 
+#define INCA_IP_EBU_EBU_CON                      ((volatile u32*)(INCA_IP_EBU+ 0x0010))
+#define INCA_IP_EBU_EBU_CON_DTACS (value)              (((( 1 << 3) - 1) & (value)) << 20)
+#define INCA_IP_EBU_EBU_CON_DTARW (value)              (((( 1 << 3) - 1) & (value)) << 16)
+#define INCA_IP_EBU_EBU_CON_TOUTC (value)              (((( 1 << 8) - 1) & (value)) << 8)
+#define INCA_IP_EBU_EBU_CON_ARBMODE (value)            (((( 1 << 2) - 1) & (value)) << 6)
+#define INCA_IP_EBU_EBU_CON_ARBSYNC                      (1 << 5)
+#define INCA_IP_EBU_EBU_CON_1                              (1 << 3)
+      
+/***EBU Address Select Register 0***/ 
+#define INCA_IP_EBU_EBU_ADDSEL0                  ((volatile u32*)(INCA_IP_EBU+ 0x0020))
+#define INCA_IP_EBU_EBU_ADDSEL0_BASE (value)               (((( 1 << 20) - 1) & (value)) << 12)
+#define INCA_IP_EBU_EBU_ADDSEL0_MASK (value)               (((( 1 << 4) - 1) & (value)) << 4)
+#define INCA_IP_EBU_EBU_ADDSEL0_MIRRORE                      (1 << 1)
+#define INCA_IP_EBU_EBU_ADDSEL0_REGEN                          (1 << 0)
+      
+/***EBU Address Select Register 1***/ 
+#define INCA_IP_EBU_EBU_ADDSEL1                  ((volatile u32*)(INCA_IP_EBU+ 0x0024))
+#define INCA_IP_EBU_EBU_ADDSEL1_BASE (value)               (((( 1 << 20) - 1) & (value)) << 12)
+#define INCA_IP_EBU_EBU_ADDSEL1_MASK (value)               (((( 1 << 4) - 1) & (value)) << 4)
+#define INCA_IP_EBU_EBU_ADDSEL1_MIRRORE                      (1 << 1)
+#define INCA_IP_EBU_EBU_ADDSEL1_REGEN                          (1 << 0)
+      
+/***EBU Address Select Register 2***/ 
+#define INCA_IP_EBU_EBU_ADDSEL2                  ((volatile u32*)(INCA_IP_EBU+ 0x0028))
+#define INCA_IP_EBU_EBU_ADDSEL2_BASE (value)               (((( 1 << 20) - 1) & (value)) << 12)
+#define INCA_IP_EBU_EBU_ADDSEL2_MASK (value)               (((( 1 << 4) - 1) & (value)) << 4)
+#define INCA_IP_EBU_EBU_ADDSEL2_MIRRORE                      (1 << 1)
+#define INCA_IP_EBU_EBU_ADDSEL2_REGEN                          (1 << 0)
+      
+/***EBU Bus Configuration Register 0***/ 
+#define INCA_IP_EBU_EBU_BUSCON0                  ((volatile u32*)(INCA_IP_EBU+ 0x0060))
+#define INCA_IP_EBU_EBU_BUSCON0_WRDIS                          (1 << 31)
+#define INCA_IP_EBU_EBU_BUSCON0_ALEC (value)               (((( 1 << 2) - 1) & (value)) << 29)
+#define INCA_IP_EBU_EBU_BUSCON0_BCGEN (value)              (((( 1 << 2) - 1) & (value)) << 27)
+#define INCA_IP_EBU_EBU_BUSCON0_AGEN (value)               (((( 1 << 2) - 1) & (value)) << 24)
+#define INCA_IP_EBU_EBU_BUSCON0_CMULTR (value)             (((( 1 << 2) - 1) & (value)) << 22)
+#define INCA_IP_EBU_EBU_BUSCON0_WAIT (value)               (((( 1 << 2) - 1) & (value)) << 20)
+#define INCA_IP_EBU_EBU_BUSCON0_WAITINV                      (1 << 19)
+#define INCA_IP_EBU_EBU_BUSCON0_SETUP                          (1 << 18)
+#define INCA_IP_EBU_EBU_BUSCON0_PORTW (value)              (((( 1 << 2) - 1) & (value)) << 16)
+#define INCA_IP_EBU_EBU_BUSCON0_WAITRDC (value)            (((( 1 << 7) - 1) & (value)) << 9)
+#define INCA_IP_EBU_EBU_BUSCON0_WAITWRC (value)            (((( 1 << 3) - 1) & (value)) << 6)
+#define INCA_IP_EBU_EBU_BUSCON0_HOLDC (value)              (((( 1 << 2) - 1) & (value)) << 4)
+#define INCA_IP_EBU_EBU_BUSCON0_RECOVC (value)             (((( 1 << 2) - 1) & (value)) << 2)
+#define INCA_IP_EBU_EBU_BUSCON0_CMULT (value)              (((( 1 << 2) - 1) & (value)) << 0)
+      
+/***EBU Bus Configuration Register 1***/ 
+#define INCA_IP_EBU_EBU_BUSCON1                  ((volatile u32*)(INCA_IP_EBU+ 0x0064))
+#define INCA_IP_EBU_EBU_BUSCON1_WRDIS                          (1 << 31)
+#define INCA_IP_EBU_EBU_BUSCON1_ALEC (value)               (((( 1 << 2) - 1) & (value)) << 29)
+#define INCA_IP_EBU_EBU_BUSCON1_BCGEN (value)              (((( 1 << 2) - 1) & (value)) << 27)
+#define INCA_IP_EBU_EBU_BUSCON1_AGEN (value)               (((( 1 << 2) - 1) & (value)) << 24)
+#define INCA_IP_EBU_EBU_BUSCON1_CMULTR (value)             (((( 1 << 2) - 1) & (value)) << 22)
+#define INCA_IP_EBU_EBU_BUSCON1_WAIT (value)               (((( 1 << 2) - 1) & (value)) << 20)
+#define INCA_IP_EBU_EBU_BUSCON1_WAITINV                      (1 << 19)
+#define INCA_IP_EBU_EBU_BUSCON1_SETUP                          (1 << 18)
+#define INCA_IP_EBU_EBU_BUSCON1_PORTW (value)              (((( 1 << 2) - 1) & (value)) << 16)
+#define INCA_IP_EBU_EBU_BUSCON1_WAITRDC (value)            (((( 1 << 7) - 1) & (value)) << 9)
+#define INCA_IP_EBU_EBU_BUSCON1_WAITWRC (value)            (((( 1 << 3) - 1) & (value)) << 6)
+#define INCA_IP_EBU_EBU_BUSCON1_HOLDC (value)              (((( 1 << 2) - 1) & (value)) << 4)
+#define INCA_IP_EBU_EBU_BUSCON1_RECOVC (value)             (((( 1 << 2) - 1) & (value)) << 2)
+#define INCA_IP_EBU_EBU_BUSCON1_CMULT (value)              (((( 1 << 2) - 1) & (value)) << 0)
+      
+/***EBU Bus Configuration Register 2***/ 
+#define INCA_IP_EBU_EBU_BUSCON2                  ((volatile u32*)(INCA_IP_EBU+ 0x0068))
+#define INCA_IP_EBU_EBU_BUSCON2_WRDIS                          (1 << 31)
+#define INCA_IP_EBU_EBU_BUSCON2_ALEC (value)               (((( 1 << 2) - 1) & (value)) << 29)
+#define INCA_IP_EBU_EBU_BUSCON2_BCGEN (value)              (((( 1 << 2) - 1) & (value)) << 27)
+#define INCA_IP_EBU_EBU_BUSCON2_AGEN (value)               (((( 1 << 2) - 1) & (value)) << 24)
+#define INCA_IP_EBU_EBU_BUSCON2_CMULTR (value)             (((( 1 << 2) - 1) & (value)) << 22)
+#define INCA_IP_EBU_EBU_BUSCON2_WAIT (value)               (((( 1 << 2) - 1) & (value)) << 20)
+#define INCA_IP_EBU_EBU_BUSCON2_WAITINV                      (1 << 19)
+#define INCA_IP_EBU_EBU_BUSCON2_SETUP                          (1 << 18)
+#define INCA_IP_EBU_EBU_BUSCON2_PORTW (value)              (((( 1 << 2) - 1) & (value)) << 16)
+#define INCA_IP_EBU_EBU_BUSCON2_WAITRDC (value)            (((( 1 << 7) - 1) & (value)) << 9)
+#define INCA_IP_EBU_EBU_BUSCON2_WAITWRC (value)            (((( 1 << 3) - 1) & (value)) << 6)
+#define INCA_IP_EBU_EBU_BUSCON2_HOLDC (value)              (((( 1 << 2) - 1) & (value)) << 4)
+#define INCA_IP_EBU_EBU_BUSCON2_RECOVC (value)             (((( 1 << 2) - 1) & (value)) << 2)
+#define INCA_IP_EBU_EBU_BUSCON2_CMULT (value)              (((( 1 << 2) - 1) & (value)) << 0)		
+         
+/***********************************************************************/
+/*  Module      :  SDRAM register address and bits                     */
+/***********************************************************************/
+         
+#define INCA_IP_SDRAM                        (0xBF800000)
+/***********************************************************************/   
+
+      
+/***MC Access Error Cause Register***/ 
+#define INCA_IP_SDRAM_MC_ERRCAUSE                  ((volatile u32*)(INCA_IP_SDRAM+ 0x0100))
+#define INCA_IP_SDRAM_MC_ERRCAUSE_ERR                              (1 << 31)
+#define INCA_IP_SDRAM_MC_ERRCAUSE_PORT (value)               (((( 1 << 4) - 1) & (value)) << 16)
+#define INCA_IP_SDRAM_MC_ERRCAUSE_CAUSE (value)              (((( 1 << 2) - 1) & (value)) << 0)
+#define INCA_IP_SDRAM_MC_ERRCAUSE_Res (value)                (((( 1 << NaN) - 1) & (value)) << NaN)
+      
+/***MC Access Error Address Register***/ 
+#define INCA_IP_SDRAM_MC_ERRADDR                   ((volatile u32*)(INCA_IP_SDRAM+ 0x0108))
+#define INCA_IP_SDRAM_MC_ERRADDR_ADDR
+      
+/***MC I/O General Purpose Register***/ 
+#define INCA_IP_SDRAM_MC_IOGP                      ((volatile u32*)(INCA_IP_SDRAM+ 0x0800))
+#define INCA_IP_SDRAM_MC_IOGP_GPR6 (value)               (((( 1 << 4) - 1) & (value)) << 28)
+#define INCA_IP_SDRAM_MC_IOGP_GPR5 (value)               (((( 1 << 4) - 1) & (value)) << 24)
+#define INCA_IP_SDRAM_MC_IOGP_GPR4 (value)               (((( 1 << 4) - 1) & (value)) << 20)
+#define INCA_IP_SDRAM_MC_IOGP_GPR3 (value)               (((( 1 << 4) - 1) & (value)) << 16)
+#define INCA_IP_SDRAM_MC_IOGP_GPR2 (value)               (((( 1 << 4) - 1) & (value)) << 12)
+#define INCA_IP_SDRAM_MC_IOGP_CPS                              (1 << 11)
+#define INCA_IP_SDRAM_MC_IOGP_CLKDELAY (value)          (((( 1 << 3) - 1) & (value)) << 8)
+#define INCA_IP_SDRAM_MC_IOGP_CLKRAT (value)             (((( 1 << 4) - 1) & (value)) << 4)
+#define INCA_IP_SDRAM_MC_IOGP_RDDEL (value)              (((( 1 << 4) - 1) & (value)) << 0)
+      
+/***MC Self Refresh Register***/ 
+#define INCA_IP_SDRAM_MC_SELFRFSH                  ((volatile u32*)(INCA_IP_SDRAM+ 0x0A00))
+#define INCA_IP_SDRAM_MC_SELFRFSH_PWDS                            (1 << 1)
+#define INCA_IP_SDRAM_MC_SELFRFSH_PWD                              (1 << 0)
+#define INCA_IP_SDRAM_MC_SELFRFSH_Res (value)                (((( 1 << 30) - 1) & (value)) << 2)
+      
+/***MC Enable Register***/ 
+#define INCA_IP_SDRAM_MC_CTRLENA                   ((volatile u32*)(INCA_IP_SDRAM+ 0x1000))
+#define INCA_IP_SDRAM_MC_CTRLENA_ENA                              (1 << 0)
+#define INCA_IP_SDRAM_MC_CTRLENA_Res (value)                (((( 1 << 31) - 1) & (value)) << 1)
+      
+/***MC Mode Register Setup Code***/ 
+#define INCA_IP_SDRAM_MC_MRSCODE                   ((volatile u32*)(INCA_IP_SDRAM+ 0x1008))
+#define INCA_IP_SDRAM_MC_MRSCODE_UMC (value)                (((( 1 << 5) - 1) & (value)) << 7)
+#define INCA_IP_SDRAM_MC_MRSCODE_CL (value)                (((( 1 << 3) - 1) & (value)) << 4)
+#define INCA_IP_SDRAM_MC_MRSCODE_WT                              (1 << 3)
+#define INCA_IP_SDRAM_MC_MRSCODE_BL (value)                (((( 1 << 3) - 1) & (value)) << 0)
+      
+/***MC Configuration Data-word Width Register***/ 
+#define INCA_IP_SDRAM_MC_CFGDW                    ((volatile u32*)(INCA_IP_SDRAM+ 0x1010))
+#define INCA_IP_SDRAM_MC_CFGDW_DW (value)                (((( 1 << 4) - 1) & (value)) << 0)
+#define INCA_IP_SDRAM_MC_CFGDW_Res (value)                (((( 1 << 28) - 1) & (value)) << 4)
+      
+/***MC Configuration Physical Bank 0 Register***/ 
+#define INCA_IP_SDRAM_MC_CFGPB0                    ((volatile u32*)(INCA_IP_SDRAM+ 0x1018))
+#define INCA_IP_SDRAM_MC_CFGPB0_MCSEN0 (value)             (((( 1 << 4) - 1) & (value)) << 12)
+#define INCA_IP_SDRAM_MC_CFGPB0_BANKN0 (value)             (((( 1 << 4) - 1) & (value)) << 8)
+#define INCA_IP_SDRAM_MC_CFGPB0_ROWW0 (value)              (((( 1 << 4) - 1) & (value)) << 4)
+#define INCA_IP_SDRAM_MC_CFGPB0_COLW0 (value)              (((( 1 << 4) - 1) & (value)) << 0)
+#define INCA_IP_SDRAM_MC_CFGPB0_Res (value)                (((( 1 << 16) - 1) & (value)) << 16)
+      
+/***MC Latency Register***/ 
+#define INCA_IP_SDRAM_MC_LATENCY                   ((volatile u32*)(INCA_IP_SDRAM+ 0x1038))
+#define INCA_IP_SDRAM_MC_LATENCY_TRP (value)                (((( 1 << 4) - 1) & (value)) << 16)
+#define INCA_IP_SDRAM_MC_LATENCY_TRAS (value)               (((( 1 << 4) - 1) & (value)) << 12)
+#define INCA_IP_SDRAM_MC_LATENCY_TRCD (value)               (((( 1 << 4) - 1) & (value)) << 8)
+#define INCA_IP_SDRAM_MC_LATENCY_TDPL (value)               (((( 1 << 4) - 1) & (value)) << 4)
+#define INCA_IP_SDRAM_MC_LATENCY_TDAL (value)               (((( 1 << 4) - 1) & (value)) << 0)
+#define INCA_IP_SDRAM_MC_LATENCY_Res (value)                (((( 1 << 12) - 1) & (value)) << 20)
+      
+/***MC Refresh Cycle Time Register***/ 
+#define INCA_IP_SDRAM_MC_TREFRESH                  ((volatile u32*)(INCA_IP_SDRAM+ 0x1040))
+#define INCA_IP_SDRAM_MC_TREFRESH_TREF (value)               (((( 1 << 13) - 1) & (value)) << 0)
+#define INCA_IP_SDRAM_MC_TREFRESH_Res (value)                (((( 1 << 19) - 1) & (value)) << 13)		
+         
+/***********************************************************************/
+/*  Module      :  GPTU register address and bits                      */
+/***********************************************************************/
+         
+#define INCA_IP_GPTU                         (0xB8000300)
+/***********************************************************************/   
+
+      
+/***GPT Clock Control Register***/ 
+#define INCA_IP_GPTU_GPT_CLC                      ((volatile u32*)(INCA_IP_GPTU+ 0x0000))
+#define INCA_IP_GPTU_GPT_CLC_RMC (value)                (((( 1 << 8) - 1) & (value)) << 8)
+#define INCA_IP_GPTU_GPT_CLC_DISS                            (1 << 1)
+#define INCA_IP_GPTU_GPT_CLC_DISR                            (1 << 0)
+      
+/***GPT Timer 3 Control Register***/ 
+#define INCA_IP_GPTU_GPT_T3CON                    ((volatile u32*)(INCA_IP_GPTU+ 0x0014))
+#define INCA_IP_GPTU_GPT_T3CON_T3RDIR                        (1 << 15)
+#define INCA_IP_GPTU_GPT_T3CON_T3CHDIR                      (1 << 14)
+#define INCA_IP_GPTU_GPT_T3CON_T3EDGE                        (1 << 13)
+#define INCA_IP_GPTU_GPT_T3CON_BPS1 (value)               (((( 1 << 2) - 1) & (value)) << 11)
+#define INCA_IP_GPTU_GPT_T3CON_T3OTL                          (1 << 10)
+#define INCA_IP_GPTU_GPT_T3CON_T3UD                            (1 << 7)
+#define INCA_IP_GPTU_GPT_T3CON_T3R                              (1 << 6)
+#define INCA_IP_GPTU_GPT_T3CON_T3M (value)                (((( 1 << 3) - 1) & (value)) << 3)
+#define INCA_IP_GPTU_GPT_T3CON_T3I (value)                (((( 1 << 3) - 1) & (value)) << 0)
+      
+/***GPT Write Hardware Modified Timer 3 Control Register 
+If set and clear bit are written concurrently with 1, the associated bit is not changed.***/
+#define INCA_IP_GPTU_GPT_WHBT3CON                 ((volatile u32*)(INCA_IP_GPTU+ 0x004C))
+#define INCA_IP_GPTU_GPT_WHBT3CON_SETT3CHDIR                (1 << 15)
+#define INCA_IP_GPTU_GPT_WHBT3CON_CLRT3CHDIR                (1 << 14)
+#define INCA_IP_GPTU_GPT_WHBT3CON_SETT3EDGE                  (1 << 13)
+#define INCA_IP_GPTU_GPT_WHBT3CON_CLRT3EDGE                  (1 << 12)
+#define INCA_IP_GPTU_GPT_WHBT3CON_SETT3OTL                  (1 << 11)
+#define INCA_IP_GPTU_GPT_WHBT3CON_CLRT3OTL                  (1 << 10)
+      
+/***GPT Timer 2 Control Register***/ 
+#define INCA_IP_GPTU_GPT_T2CON                    ((volatile u32*)(INCA_IP_GPTU+ 0x0010))
+#define INCA_IP_GPTU_GPT_T2CON_TxRDIR                        (1 << 15)
+#define INCA_IP_GPTU_GPT_T2CON_TxCHDIR                      (1 << 14)
+#define INCA_IP_GPTU_GPT_T2CON_TxEDGE                        (1 << 13)
+#define INCA_IP_GPTU_GPT_T2CON_TxIRDIS                      (1 << 12)
+#define INCA_IP_GPTU_GPT_T2CON_TxRC                            (1 << 9)
+#define INCA_IP_GPTU_GPT_T2CON_TxUD                            (1 << 7)
+#define INCA_IP_GPTU_GPT_T2CON_TxR                              (1 << 6)
+#define INCA_IP_GPTU_GPT_T2CON_TxM (value)                (((( 1 << 3) - 1) & (value)) << 3)
+#define INCA_IP_GPTU_GPT_T2CON_TxI (value)                (((( 1 << 3) - 1) & (value)) << 0)
+      
+/***GPT Timer 4 Control Register***/ 
+#define INCA_IP_GPTU_GPT_T4CON                    ((volatile u32*)(INCA_IP_GPTU+ 0x0018))
+#define INCA_IP_GPTU_GPT_T4CON_TxRDIR                        (1 << 15)
+#define INCA_IP_GPTU_GPT_T4CON_TxCHDIR                      (1 << 14)
+#define INCA_IP_GPTU_GPT_T4CON_TxEDGE                        (1 << 13)
+#define INCA_IP_GPTU_GPT_T4CON_TxIRDIS                      (1 << 12)
+#define INCA_IP_GPTU_GPT_T4CON_TxRC                            (1 << 9)
+#define INCA_IP_GPTU_GPT_T4CON_TxUD                            (1 << 7)
+#define INCA_IP_GPTU_GPT_T4CON_TxR                              (1 << 6)
+#define INCA_IP_GPTU_GPT_T4CON_TxM (value)                (((( 1 << 3) - 1) & (value)) << 3)
+#define INCA_IP_GPTU_GPT_T4CON_TxI (value)                (((( 1 << 3) - 1) & (value)) << 0)
+      
+/***GPT Write HW Modified Timer 2 Control Register If set
+ and clear bit are written concurrently with 1, the associated bit is not changed.***/
+#define INCA_IP_GPTU_GPT_WHBT2CON                 ((volatile u32*)(INCA_IP_GPTU+ 0x0048))
+#define INCA_IP_GPTU_GPT_WHBT2CON_SETTxCHDIR                (1 << 15)
+#define INCA_IP_GPTU_GPT_WHBT2CON_CLRTxCHDIR                (1 << 14)
+#define INCA_IP_GPTU_GPT_WHBT2CON_SETTxEDGE                  (1 << 13)
+#define INCA_IP_GPTU_GPT_WHBT2CON_CLRTxEDGE                  (1 << 12)
+      
+/***GPT Write HW Modified Timer 4 Control Register If set
+ and clear bit are written concurrently with 1, the associated bit is not changed.***/
+#define INCA_IP_GPTU_GPT_WHBT4CON                 ((volatile u32*)(INCA_IP_GPTU+ 0x0050))
+#define INCA_IP_GPTU_GPT_WHBT4CON_SETTxCHDIR                (1 << 15)
+#define INCA_IP_GPTU_GPT_WHBT4CON_CLRTxCHDIR                (1 << 14)
+#define INCA_IP_GPTU_GPT_WHBT4CON_SETTxEDGE                  (1 << 13)
+#define INCA_IP_GPTU_GPT_WHBT4CON_CLRTxEDGE                  (1 << 12)
+      
+/***GPT Capture Reload Register***/ 
+#define INCA_IP_GPTU_GPT_CAPREL                   ((volatile u32*)(INCA_IP_GPTU+ 0x0030))
+#define INCA_IP_GPTU_GPT_CAPREL_CAPREL (value)             (((( 1 << 16) - 1) & (value)) << 0)
+      
+/***GPT Timer 2 Register***/ 
+#define INCA_IP_GPTU_GPT_T2                       ((volatile u32*)(INCA_IP_GPTU+ 0x0034))
+#define INCA_IP_GPTU_GPT_T2_TVAL (value)               (((( 1 << 16) - 1) & (value)) << 0)
+      
+/***GPT Timer 3 Register***/ 
+#define INCA_IP_GPTU_GPT_T3                       ((volatile u32*)(INCA_IP_GPTU+ 0x0038))
+#define INCA_IP_GPTU_GPT_T3_TVAL (value)               (((( 1 << 16) - 1) & (value)) << 0)
+      
+/***GPT Timer 4 Register***/ 
+#define INCA_IP_GPTU_GPT_T4                       ((volatile u32*)(INCA_IP_GPTU+ 0x003C))
+#define INCA_IP_GPTU_GPT_T4_TVAL (value)               (((( 1 << 16) - 1) & (value)) << 0)
+      
+/***GPT Timer 5 Register***/ 
+#define INCA_IP_GPTU_GPT_T5                       ((volatile u32*)(INCA_IP_GPTU+ 0x0040))
+#define INCA_IP_GPTU_GPT_T5_TVAL (value)               (((( 1 << 16) - 1) & (value)) << 0)
+      
+/***GPT Timer 6 Register***/ 
+#define INCA_IP_GPTU_GPT_T6                       ((volatile u32*)(INCA_IP_GPTU+ 0x0044))
+#define INCA_IP_GPTU_GPT_T6_TVAL (value)               (((( 1 << 16) - 1) & (value)) << 0)
+      
+/***GPT Timer 6 Control Register***/ 
+#define INCA_IP_GPTU_GPT_T6CON                    ((volatile u32*)(INCA_IP_GPTU+ 0x0020))
+#define INCA_IP_GPTU_GPT_T6CON_T6SR                            (1 << 15)
+#define INCA_IP_GPTU_GPT_T6CON_T6CLR                          (1 << 14)
+#define INCA_IP_GPTU_GPT_T6CON_BPS2 (value)               (((( 1 << 2) - 1) & (value)) << 11)
+#define INCA_IP_GPTU_GPT_T6CON_T6OTL                          (1 << 10)
+#define INCA_IP_GPTU_GPT_T6CON_T6UD                            (1 << 7)
+#define INCA_IP_GPTU_GPT_T6CON_T6R                              (1 << 6)
+#define INCA_IP_GPTU_GPT_T6CON_T6M (value)                (((( 1 << 3) - 1) & (value)) << 3)
+#define INCA_IP_GPTU_GPT_T6CON_T6I (value)                (((( 1 << 3) - 1) & (value)) << 0)
+      
+/***GPT Write HW Modified Timer 6 Control Register If set
+ and clear bit are written concurrently with 1, the associated bit is not changed.***/
+#define INCA_IP_GPTU_GPT_WHBT6CON                 ((volatile u32*)(INCA_IP_GPTU+ 0x0054))
+#define INCA_IP_GPTU_GPT_WHBT6CON_SETT6OTL                  (1 << 11)
+#define INCA_IP_GPTU_GPT_WHBT6CON_CLRT6OTL                  (1 << 10)
+      
+/***GPT Timer 5 Control Register***/ 
+#define INCA_IP_GPTU_GPT_T5CON                    ((volatile u32*)(INCA_IP_GPTU+ 0x001C))
+#define INCA_IP_GPTU_GPT_T5CON_T5SC                            (1 << 15)
+#define INCA_IP_GPTU_GPT_T5CON_T5CLR                          (1 << 14)
+#define INCA_IP_GPTU_GPT_T5CON_CI (value)                (((( 1 << 2) - 1) & (value)) << 12)
+#define INCA_IP_GPTU_GPT_T5CON_T5CC                            (1 << 11)
+#define INCA_IP_GPTU_GPT_T5CON_CT3                              (1 << 10)
+#define INCA_IP_GPTU_GPT_T5CON_T5RC                            (1 << 9)
+#define INCA_IP_GPTU_GPT_T5CON_T5UDE                          (1 << 8)
+#define INCA_IP_GPTU_GPT_T5CON_T5UD                            (1 << 7)
+#define INCA_IP_GPTU_GPT_T5CON_T5R                              (1 << 6)
+#define INCA_IP_GPTU_GPT_T5CON_T5M (value)                (((( 1 << 3) - 1) & (value)) << 3)
+#define INCA_IP_GPTU_GPT_T5CON_T5I (value)                (((( 1 << 3) - 1) & (value)) << 0)		
+         
+/***********************************************************************/
+/*  Module      :  IOM register address and bits                       */
+/***********************************************************************/
+         
+#define INCA_IP_IOM                          (0xBF105000)
+/***********************************************************************/   
+
+      
+/***Receive FIFO***/ 
+#define INCA_IP_IOM_RFIFO                        ((volatile u32*)(INCA_IP_IOM+ 0x0000))
+#define INCA_IP_IOM_RFIFO_RXD (value)                (((( 1 << 8) - 1) & (value)) << 0)
+      
+/***Transmit FIFO***/ 
+#define INCA_IP_IOM_XFIFO                        ((volatile u32*)(INCA_IP_IOM+ 0x0000))
+#define INCA_IP_IOM_XFIFO_TXD (value)                (((( 1 << 8) - 1) & (value)) << 0)
+      
+/***Interrupt Status Register HDLC***/ 
+#define INCA_IP_IOM_ISTAH                        ((volatile u32*)(INCA_IP_IOM+ 0x0080))
+#define INCA_IP_IOM_ISTAH_RME                              (1 << 7)
+#define INCA_IP_IOM_ISTAH_RPF                              (1 << 6)
+#define INCA_IP_IOM_ISTAH_RFO                              (1 << 5)
+#define INCA_IP_IOM_ISTAH_XPR                              (1 << 4)
+#define INCA_IP_IOM_ISTAH_XMR                              (1 << 3)
+#define INCA_IP_IOM_ISTAH_XDU                              (1 << 2)
+      
+/***Interrupt Mask Register HDLC***/ 
+#define INCA_IP_IOM_MASKH                        ((volatile u32*)(INCA_IP_IOM+ 0x0080))
+#define INCA_IP_IOM_MASKH_RME                              (1 << 7)
+#define INCA_IP_IOM_MASKH_RPF                              (1 << 6)
+#define INCA_IP_IOM_MASKH_RFO                              (1 << 5)
+#define INCA_IP_IOM_MASKH_XPR                              (1 << 4)
+#define INCA_IP_IOM_MASKH_XMR                              (1 << 3)
+#define INCA_IP_IOM_MASKH_XDU                              (1 << 2)
+      
+/***Status Register***/ 
+#define INCA_IP_IOM_STAR                         ((volatile u32*)(INCA_IP_IOM+ 0x0084))
+#define INCA_IP_IOM_STAR_XDOV                            (1 << 7)
+#define INCA_IP_IOM_STAR_XFW                              (1 << 6)
+#define INCA_IP_IOM_STAR_RACI                            (1 << 3)
+#define INCA_IP_IOM_STAR_XACI                            (1 << 1)
+      
+/***Command Register***/ 
+#define INCA_IP_IOM_CMDR                         ((volatile u32*)(INCA_IP_IOM+ 0x0084))
+#define INCA_IP_IOM_CMDR_RMC                              (1 << 7)
+#define INCA_IP_IOM_CMDR_RRES                            (1 << 6)
+#define INCA_IP_IOM_CMDR_XTF                              (1 << 3)
+#define INCA_IP_IOM_CMDR_XME                              (1 << 1)
+#define INCA_IP_IOM_CMDR_XRES                            (1 << 0)
+      
+/***Mode Register***/ 
+#define INCA_IP_IOM_MODEH                        ((volatile u32*)(INCA_IP_IOM+ 0x0088))
+#define INCA_IP_IOM_MODEH_MDS2                            (1 << 7)
+#define INCA_IP_IOM_MODEH_MDS1                            (1 << 6)
+#define INCA_IP_IOM_MODEH_MDS0                            (1 << 5)
+#define INCA_IP_IOM_MODEH_RAC                              (1 << 3)
+#define INCA_IP_IOM_MODEH_DIM2                            (1 << 2)
+#define INCA_IP_IOM_MODEH_DIM1                            (1 << 1)
+#define INCA_IP_IOM_MODEH_DIM0                            (1 << 0)
+      
+/***Extended Mode Register***/ 
+#define INCA_IP_IOM_EXMR                         ((volatile u32*)(INCA_IP_IOM+ 0x008C))
+#define INCA_IP_IOM_EXMR_XFBS                            (1 << 7)
+#define INCA_IP_IOM_EXMR_RFBS (value)               (((( 1 << 2) - 1) & (value)) << 5)
+#define INCA_IP_IOM_EXMR_SRA                              (1 << 4)
+#define INCA_IP_IOM_EXMR_XCRC                            (1 << 3)
+#define INCA_IP_IOM_EXMR_RCRC                            (1 << 2)
+#define INCA_IP_IOM_EXMR_ITF                              (1 << 0)
+      
+/***SAPI1 Register***/ 
+#define INCA_IP_IOM_SAP1                         ((volatile u32*)(INCA_IP_IOM+ 0x0094))
+#define INCA_IP_IOM_SAP1_SAPI1 (value)              (((( 1 << 6) - 1) & (value)) << 2)
+#define INCA_IP_IOM_SAP1_MHA                              (1 << 0)
+      
+/***Receive Frame Byte Count Low***/ 
+#define INCA_IP_IOM_RBCL                         ((volatile u32*)(INCA_IP_IOM+ 0x0098))
+#define INCA_IP_IOM_RBCL_RBC(value)              (1 << value)
+                      
+      
+/***SAPI2 Register***/ 
+#define INCA_IP_IOM_SAP2                         ((volatile u32*)(INCA_IP_IOM+ 0x0098))
+#define INCA_IP_IOM_SAP2_SAPI2 (value)              (((( 1 << 6) - 1) & (value)) << 2)
+#define INCA_IP_IOM_SAP2_MLA                              (1 << 0)
+      
+/***Receive Frame Byte Count High***/ 
+#define INCA_IP_IOM_RBCH                         ((volatile u32*)(INCA_IP_IOM+ 0x009C))
+#define INCA_IP_IOM_RBCH_OV                              (1 << 4)
+#define INCA_IP_IOM_RBCH_RBC11                          (1 << 3)
+#define INCA_IP_IOM_RBCH_RBC10                          (1 << 2)
+#define INCA_IP_IOM_RBCH_RBC9                            (1 << 1)
+#define INCA_IP_IOM_RBCH_RBC8                            (1 << 0)
+      
+/***TEI1 Register 1***/ 
+#define INCA_IP_IOM_TEI1                         ((volatile u32*)(INCA_IP_IOM+ 0x009C))
+#define INCA_IP_IOM_TEI1_TEI1 (value)               (((( 1 << 7) - 1) & (value)) << 1)
+#define INCA_IP_IOM_TEI1_EA                              (1 << 0)
+      
+/***Receive Status Register***/ 
+#define INCA_IP_IOM_RSTA                         ((volatile u32*)(INCA_IP_IOM+ 0x00A0))
+#define INCA_IP_IOM_RSTA_VFR                              (1 << 7)
+#define INCA_IP_IOM_RSTA_RDO                              (1 << 6)
+#define INCA_IP_IOM_RSTA_CRC                              (1 << 5)
+#define INCA_IP_IOM_RSTA_RAB                              (1 << 4)
+#define INCA_IP_IOM_RSTA_SA1                              (1 << 3)
+#define INCA_IP_IOM_RSTA_SA0                              (1 << 2)
+#define INCA_IP_IOM_RSTA_TA                              (1 << 0)
+#define INCA_IP_IOM_RSTA_CR                              (1 << 1)
+      
+/***TEI2 Register***/ 
+#define INCA_IP_IOM_TEI2                         ((volatile u32*)(INCA_IP_IOM+ 0x00A0))
+#define INCA_IP_IOM_TEI2_TEI2 (value)               (((( 1 << 7) - 1) & (value)) << 1)
+#define INCA_IP_IOM_TEI2_EA                              (1 << 0)
+      
+/***Test Mode Register HDLC***/ 
+#define INCA_IP_IOM_TMH                          ((volatile u32*)(INCA_IP_IOM+ 0x00A4))
+#define INCA_IP_IOM_TMH_TLP                              (1 << 0)
+      
+/***Command/Indication Receive 0***/ 
+#define INCA_IP_IOM_CIR0                         ((volatile u32*)(INCA_IP_IOM+ 0x00B8))
+#define INCA_IP_IOM_CIR0_CODR0 (value)              (((( 1 << 4) - 1) & (value)) << 4)
+#define INCA_IP_IOM_CIR0_CIC0                            (1 << 3)
+#define INCA_IP_IOM_CIR0_CIC1                            (1 << 2)
+#define INCA_IP_IOM_CIR0_SG                              (1 << 1)
+#define INCA_IP_IOM_CIR0_BAS                              (1 << 0)
+      
+/***Command/Indication Transmit 0***/ 
+#define INCA_IP_IOM_CIX0                         ((volatile u32*)(INCA_IP_IOM+ 0x00B8))
+#define INCA_IP_IOM_CIX0_CODX0 (value)              (((( 1 << 4) - 1) & (value)) << 4)
+#define INCA_IP_IOM_CIX0_TBA2                            (1 << 3)
+#define INCA_IP_IOM_CIX0_TBA1                            (1 << 2)
+#define INCA_IP_IOM_CIX0_TBA0                            (1 << 1)
+#define INCA_IP_IOM_CIX0_BAC                              (1 << 0)
+      
+/***Command/Indication Receive 1***/ 
+#define INCA_IP_IOM_CIR1                         ((volatile u32*)(INCA_IP_IOM+ 0x00BC))
+#define INCA_IP_IOM_CIR1_CODR1 (value)              (((( 1 << 6) - 1) & (value)) << 2)
+      
+/***Command/Indication Transmit 1***/ 
+#define INCA_IP_IOM_CIX1                         ((volatile u32*)(INCA_IP_IOM+ 0x00BC))
+#define INCA_IP_IOM_CIX1_CODX1 (value)              (((( 1 << 6) - 1) & (value)) << 2)
+#define INCA_IP_IOM_CIX1_CICW                            (1 << 1)
+#define INCA_IP_IOM_CIX1_CI1E                            (1 << 0)
+      
+/***Controller Data Access Reg. (CH10)***/ 
+#define INCA_IP_IOM_CDA10                        ((volatile u32*)(INCA_IP_IOM+ 0x0100))
+#define INCA_IP_IOM_CDA10_CDA (value)                (((( 1 << 8) - 1) & (value)) << 0)
+      
+/***Controller Data Access Reg. (CH11)***/ 
+#define INCA_IP_IOM_CDA11                        ((volatile u32*)(INCA_IP_IOM+ 0x0104))
+#define INCA_IP_IOM_CDA11_CDA (value)                (((( 1 << 8) - 1) & (value)) << 0)
+      
+/***Controller Data Access Reg. (CH20)***/ 
+#define INCA_IP_IOM_CDA20                        ((volatile u32*)(INCA_IP_IOM+ 0x0108))
+#define INCA_IP_IOM_CDA20_CDA (value)                (((( 1 << 8) - 1) & (value)) << 0)
+      
+/***Controller Data Access Reg. (CH21)***/ 
+#define INCA_IP_IOM_CDA21                        ((volatile u32*)(INCA_IP_IOM+ 0x010C))
+#define INCA_IP_IOM_CDA21_CDA (value)                (((( 1 << 8) - 1) & (value)) << 0)
+      
+/***Time Slot and Data Port Sel. (CH10)***/ 
+#define INCA_IP_IOM_CDA_TSDP10                   ((volatile u32*)(INCA_IP_IOM+ 0x0110))
+#define INCA_IP_IOM_CDA_TSDP10_DPS                              (1 << 7)
+#define INCA_IP_IOM_CDA_TSDP10_TSS (value)                (((( 1 << 4) - 1) & (value)) << 0)
+      
+/***Time Slot and Data Port Sel. (CH11)***/ 
+#define INCA_IP_IOM_CDA_TSDP11                   ((volatile u32*)(INCA_IP_IOM+ 0x0114))
+#define INCA_IP_IOM_CDA_TSDP11_DPS                              (1 << 7)
+#define INCA_IP_IOM_CDA_TSDP11_TSS (value)                (((( 1 << 4) - 1) & (value)) << 0)
+      
+/***Time Slot and Data Port Sel. (CH20)***/ 
+#define INCA_IP_IOM_CDA_TSDP20                   ((volatile u32*)(INCA_IP_IOM+ 0x0118))
+#define INCA_IP_IOM_CDA_TSDP20_DPS                              (1 << 7)
+#define INCA_IP_IOM_CDA_TSDP20_TSS (value)                (((( 1 << 4) - 1) & (value)) << 0)
+      
+/***Time Slot and Data Port Sel. (CH21)***/ 
+#define INCA_IP_IOM_CDA_TSDP21                   ((volatile u32*)(INCA_IP_IOM+ 0x011C))
+#define INCA_IP_IOM_CDA_TSDP21_DPS                              (1 << 7)
+#define INCA_IP_IOM_CDA_TSDP21_TSS (value)                (((( 1 << 4) - 1) & (value)) << 0)
+      
+/***Time Slot and Data Port Sel. (CH10)***/ 
+#define INCA_IP_IOM_CO_TSDP10                    ((volatile u32*)(INCA_IP_IOM+ 0x0120))
+#define INCA_IP_IOM_CO_TSDP10_DPS                              (1 << 7)
+#define INCA_IP_IOM_CO_TSDP10_TSS (value)                (((( 1 << 4) - 1) & (value)) << 0)
+      
+/***Time Slot and Data Port Sel. (CH11)***/ 
+#define INCA_IP_IOM_CO_TSDP11                    ((volatile u32*)(INCA_IP_IOM+ 0x0124))
+#define INCA_IP_IOM_CO_TSDP11_DPS                              (1 << 7)
+#define INCA_IP_IOM_CO_TSDP11_TSS (value)                (((( 1 << 4) - 1) & (value)) << 0)
+      
+/***Time Slot and Data Port Sel. (CH20)***/ 
+#define INCA_IP_IOM_CO_TSDP20                    ((volatile u32*)(INCA_IP_IOM+ 0x0128))
+#define INCA_IP_IOM_CO_TSDP20_DPS                              (1 << 7)
+#define INCA_IP_IOM_CO_TSDP20_TSS (value)                (((( 1 << 4) - 1) & (value)) << 0)
+      
+/***Time Slot and Data Port Sel. (CH21)***/ 
+#define INCA_IP_IOM_CO_TSDP21                    ((volatile u32*)(INCA_IP_IOM+ 0x012C))
+#define INCA_IP_IOM_CO_TSDP21_DPS                              (1 << 7)
+#define INCA_IP_IOM_CO_TSDP21_TSS (value)                (((( 1 << 4) - 1) & (value)) << 0)
+      
+/***Ctrl. Reg. Contr. Data Access CH1x***/ 
+#define INCA_IP_IOM_CDA1_CR                      ((volatile u32*)(INCA_IP_IOM+ 0x0138))
+#define INCA_IP_IOM_CDA1_CR_EN_TBM                        (1 << 5)
+#define INCA_IP_IOM_CDA1_CR_EN_I1                          (1 << 4)
+#define INCA_IP_IOM_CDA1_CR_EN_I0                          (1 << 3)
+#define INCA_IP_IOM_CDA1_CR_EN_O1                          (1 << 2)
+#define INCA_IP_IOM_CDA1_CR_EN_O0                          (1 << 1)
+#define INCA_IP_IOM_CDA1_CR_SWAP                            (1 << 0)
+      
+/***Ctrl. Reg. Contr. Data Access CH1x***/ 
+#define INCA_IP_IOM_CDA2_CR                      ((volatile u32*)(INCA_IP_IOM+ 0x013C))
+#define INCA_IP_IOM_CDA2_CR_EN_TBM                        (1 << 5)
+#define INCA_IP_IOM_CDA2_CR_EN_I1                          (1 << 4)
+#define INCA_IP_IOM_CDA2_CR_EN_I0                          (1 << 3)
+#define INCA_IP_IOM_CDA2_CR_EN_O1                          (1 << 2)
+#define INCA_IP_IOM_CDA2_CR_EN_O0                          (1 << 1)
+#define INCA_IP_IOM_CDA2_CR_SWAP                            (1 << 0)
+      
+/***Control Register B-Channel Data***/ 
+#define INCA_IP_IOM_BCHA_CR                      ((volatile u32*)(INCA_IP_IOM+ 0x0144))
+#define INCA_IP_IOM_BCHA_CR_EN_BC2                        (1 << 4)
+#define INCA_IP_IOM_BCHA_CR_EN_BC1                        (1 << 3)
+      
+/***Control Register B-Channel Data***/ 
+#define INCA_IP_IOM_BCHB_CR                      ((volatile u32*)(INCA_IP_IOM+ 0x0148))
+#define INCA_IP_IOM_BCHB_CR_EN_BC2                        (1 << 4)
+#define INCA_IP_IOM_BCHB_CR_EN_BC1                        (1 << 3)
+      
+/***Control Reg. for HDLC and CI1 Data***/ 
+#define INCA_IP_IOM_DCI_CR                       ((volatile u32*)(INCA_IP_IOM+ 0x014C))
+#define INCA_IP_IOM_DCI_CR_DPS_CI1                      (1 << 7)
+#define INCA_IP_IOM_DCI_CR_EN_CI1                        (1 << 6)
+#define INCA_IP_IOM_DCI_CR_EN_D                            (1 << 5)
+      
+/***Control Reg. for HDLC and CI1 Data***/ 
+#define INCA_IP_IOM_DCIC_CR                      ((volatile u32*)(INCA_IP_IOM+ 0x014C))
+#define INCA_IP_IOM_DCIC_CR_DPS_CI0                      (1 << 7)
+#define INCA_IP_IOM_DCIC_CR_EN_CI0                        (1 << 6)
+#define INCA_IP_IOM_DCIC_CR_DPS_D                          (1 << 5)
+      
+/***Control Reg. Serial Data Strobe x***/ 
+#define INCA_IP_IOM_SDS_CR                       ((volatile u32*)(INCA_IP_IOM+ 0x0154))
+#define INCA_IP_IOM_SDS_CR_ENS_TSS                      (1 << 7)
+#define INCA_IP_IOM_SDS_CR_ENS_TSS_1                  (1 << 6)
+#define INCA_IP_IOM_SDS_CR_ENS_TSS_3                  (1 << 5)
+#define INCA_IP_IOM_SDS_CR_TSS (value)                (((( 1 << 4) - 1) & (value)) << 0)
+      
+/***Control Register IOM Data***/ 
+#define INCA_IP_IOM_IOM_CR                       ((volatile u32*)(INCA_IP_IOM+ 0x015C))
+#define INCA_IP_IOM_IOM_CR_SPU                              (1 << 7)
+#define INCA_IP_IOM_IOM_CR_CI_CS                          (1 << 5)
+#define INCA_IP_IOM_IOM_CR_TIC_DIS                      (1 << 4)
+#define INCA_IP_IOM_IOM_CR_EN_BCL                        (1 << 3)
+#define INCA_IP_IOM_IOM_CR_CLKM                            (1 << 2)
+#define INCA_IP_IOM_IOM_CR_Res                              (1 << 1)
+#define INCA_IP_IOM_IOM_CR_DIS_IOM                      (1 << 0)
+      
+/***Synchronous Transfer Interrupt***/ 
+#define INCA_IP_IOM_STI                          ((volatile u32*)(INCA_IP_IOM+ 0x0160))
+#define INCA_IP_IOM_STI_STOV21                        (1 << 7)
+#define INCA_IP_IOM_STI_STOV20                        (1 << 6)
+#define INCA_IP_IOM_STI_STOV11                        (1 << 5)
+#define INCA_IP_IOM_STI_STOV10                        (1 << 4)
+#define INCA_IP_IOM_STI_STI21                          (1 << 3)
+#define INCA_IP_IOM_STI_STI20                          (1 << 2)
+#define INCA_IP_IOM_STI_STI11                          (1 << 1)
+#define INCA_IP_IOM_STI_STI10                          (1 << 0)
+      
+/***Acknowledge Synchronous Transfer Interrupt***/ 
+#define INCA_IP_IOM_ASTI                         ((volatile u32*)(INCA_IP_IOM+ 0x0160))
+#define INCA_IP_IOM_ASTI_ACK21                          (1 << 3)
+#define INCA_IP_IOM_ASTI_ACK20                          (1 << 2)
+#define INCA_IP_IOM_ASTI_ACK11                          (1 << 1)
+#define INCA_IP_IOM_ASTI_ACK10                          (1 << 0)
+      
+/***Mask Synchronous Transfer Interrupt***/ 
+#define INCA_IP_IOM_MSTI                         ((volatile u32*)(INCA_IP_IOM+ 0x0164))
+#define INCA_IP_IOM_MSTI_STOV21                        (1 << 7)
+#define INCA_IP_IOM_MSTI_STOV20                        (1 << 6)
+#define INCA_IP_IOM_MSTI_STOV11                        (1 << 5)
+#define INCA_IP_IOM_MSTI_STOV10                        (1 << 4)
+#define INCA_IP_IOM_MSTI_STI21                          (1 << 3)
+#define INCA_IP_IOM_MSTI_STI20                          (1 << 2)
+#define INCA_IP_IOM_MSTI_STI11                          (1 << 1)
+#define INCA_IP_IOM_MSTI_STI10                          (1 << 0)
+      
+/***Configuration Register for Serial Data Strobes***/ 
+#define INCA_IP_IOM_SDS_CONF                    ((volatile u32*)(INCA_IP_IOM+ 0x0168))
+#define INCA_IP_IOM_SDS_CONF_SDS_BCL                      (1 << 0)
+      
+/***Monitoring CDA Bits***/ 
+#define INCA_IP_IOM_MCDA                         ((volatile u32*)(INCA_IP_IOM+ 0x016C))
+#define INCA_IP_IOM_MCDA_MCDA21 (value)             (((( 1 << 2) - 1) & (value)) << 6)
+#define INCA_IP_IOM_MCDA_MCDA20 (value)             (((( 1 << 2) - 1) & (value)) << 4)
+#define INCA_IP_IOM_MCDA_MCDA11 (value)             (((( 1 << 2) - 1) & (value)) << 2)
+#define INCA_IP_IOM_MCDA_MCDA10 (value)             (((( 1 << 2) - 1) & (value)) << 0)		
+         
+/***********************************************************************/
+/*  Module      :  ASC register address and bits                       */
+/***********************************************************************/
+         
+#define INCA_IP_ASC                          (0xB8000400)
+/***********************************************************************/   
+
+      
+/***ASC Port Input Select Register***/ 
+#define INCA_IP_ASC_ASC_PISEL                    ((volatile u32*)(INCA_IP_ASC+ 0x0004))
+#define INCA_IP_ASC_ASC_PISEL_RIS                              (1 << 0)
+      
+/***ASC Control Register***/ 
+#define INCA_IP_ASC_ASC_CON                      ((volatile u32*)(INCA_IP_ASC+ 0x0010))
+#define INCA_IP_ASC_ASC_CON_R                              (1 << 15)
+#define INCA_IP_ASC_ASC_CON_LB                              (1 << 14)
+#define INCA_IP_ASC_ASC_CON_BRS                              (1 << 13)
+#define INCA_IP_ASC_ASC_CON_ODD                              (1 << 12)
+#define INCA_IP_ASC_ASC_CON_FDE                              (1 << 11)
+#define INCA_IP_ASC_ASC_CON_OE                              (1 << 10)
+#define INCA_IP_ASC_ASC_CON_FE                              (1 << 9)
+#define INCA_IP_ASC_ASC_CON_PE                              (1 << 8)
+#define INCA_IP_ASC_ASC_CON_OEN                              (1 << 7)
+#define INCA_IP_ASC_ASC_CON_FEN                              (1 << 6)
+#define INCA_IP_ASC_ASC_CON_PENRXDI                  (1 << 5)
+#define INCA_IP_ASC_ASC_CON_REN                              (1 << 4)
+#define INCA_IP_ASC_ASC_CON_STP                              (1 << 3)
+#define INCA_IP_ASC_ASC_CON_M (value)                (((( 1 << 3) - 1) & (value)) << 0)
+      
+/***ASC Write Hardware Modified Control Register***/ 
+#define INCA_IP_ASC_ASC_WHBCON                   ((volatile u32*)(INCA_IP_ASC+ 0x0050))
+#define INCA_IP_ASC_ASC_WHBCON_SETOE                          (1 << 13)
+#define INCA_IP_ASC_ASC_WHBCON_SETFE                          (1 << 12)
+#define INCA_IP_ASC_ASC_WHBCON_SETPE                          (1 << 11)
+#define INCA_IP_ASC_ASC_WHBCON_CLROE                          (1 << 10)
+#define INCA_IP_ASC_ASC_WHBCON_CLRFE                          (1 << 9)
+#define INCA_IP_ASC_ASC_WHBCON_CLRPE                          (1 << 8)
+#define INCA_IP_ASC_ASC_WHBCON_SETREN                        (1 << 5)
+#define INCA_IP_ASC_ASC_WHBCON_CLRREN                        (1 << 4)
+      
+/***ASC Baudrate Timer/Reload Register***/ 
+#define INCA_IP_ASC_ASC_BTR                      ((volatile u32*)(INCA_IP_ASC+ 0x0014))
+#define INCA_IP_ASC_ASC_BTR_BR_VALUE (value)          (((( 1 << 13) - 1) & (value)) << 0)
+      
+/***ASC Fractional Divider Register***/ 
+#define INCA_IP_ASC_ASC_FDV                      ((volatile u32*)(INCA_IP_ASC+ 0x0018))
+#define INCA_IP_ASC_ASC_FDV_FD_VALUE (value)          (((( 1 << 9) - 1) & (value)) << 0)
+      
+/***ASC IrDA Pulse Mode/Width Register***/ 
+#define INCA_IP_ASC_ASC_PMW                      ((volatile u32*)(INCA_IP_ASC+ 0x001C))
+#define INCA_IP_ASC_ASC_PMW_IRPW                            (1 << 8)
+#define INCA_IP_ASC_ASC_PMW_PW_VALUE (value)          (((( 1 << 8) - 1) & (value)) << 0)
+      
+/***ASC Transmit Buffer Register***/ 
+#define INCA_IP_ASC_ASC_TBUF                    ((volatile u32*)(INCA_IP_ASC+ 0x0020))
+#define INCA_IP_ASC_ASC_TBUF_TD_VALUE (value)          (((( 1 << 9) - 1) & (value)) << 0)
+      
+/***ASC Receive Buffer Register***/ 
+#define INCA_IP_ASC_ASC_RBUF                    ((volatile u32*)(INCA_IP_ASC+ 0x0024))
+#define INCA_IP_ASC_ASC_RBUF_RD_VALUE (value)          (((( 1 << 9) - 1) & (value)) << 0)
+      
+/***ASC Autobaud Control Register***/ 
+#define INCA_IP_ASC_ASC_ABCON                    ((volatile u32*)(INCA_IP_ASC+ 0x0030))
+#define INCA_IP_ASC_ASC_ABCON_RXINV                          (1 << 11)
+#define INCA_IP_ASC_ASC_ABCON_TXINV                          (1 << 10)
+#define INCA_IP_ASC_ASC_ABCON_ABEM (value)               (((( 1 << 2) - 1) & (value)) << 8)
+#define INCA_IP_ASC_ASC_ABCON_FCDETEN                      (1 << 4)
+#define INCA_IP_ASC_ASC_ABCON_ABDETEN                      (1 << 3)
+#define INCA_IP_ASC_ASC_ABCON_ABSTEN                        (1 << 2)
+#define INCA_IP_ASC_ASC_ABCON_AUREN                          (1 << 1)
+#define INCA_IP_ASC_ASC_ABCON_ABEN                            (1 << 0)
+      
+/***Receive FIFO Control Register***/ 
+#define INCA_IP_ASC_RXFCON                       ((volatile u32*)(INCA_IP_ASC+ 0x0040))
+#define INCA_IP_ASC_RXFCON_RXFITL (value)             (((( 1 << 6) - 1) & (value)) << 8)
+#define INCA_IP_ASC_RXFCON_RXTMEN                        (1 << 2)
+#define INCA_IP_ASC_RXFCON_RXFFLU                        (1 << 1)
+#define INCA_IP_ASC_RXFCON_RXFEN                          (1 << 0)
+      
+/***Transmit FIFO Control Register***/ 
+#define INCA_IP_ASC_TXFCON                       ((volatile u32*)(INCA_IP_ASC+ 0x0044))
+#define INCA_IP_ASC_TXFCON_TXFITL (value)             (((( 1 << 6) - 1) & (value)) << 8)
+#define INCA_IP_ASC_TXFCON_TXTMEN                        (1 << 2)
+#define INCA_IP_ASC_TXFCON_TXFFLU                        (1 << 1)
+#define INCA_IP_ASC_TXFCON_TXFEN                          (1 << 0)
+      
+/***FIFO Status Register***/ 
+#define INCA_IP_ASC_FSTAT                        ((volatile u32*)(INCA_IP_ASC+ 0x0048))
+#define INCA_IP_ASC_FSTAT_TXFFL (value)              (((( 1 << 6) - 1) & (value)) << 8)
+#define INCA_IP_ASC_FSTAT_RXFFL (value)              (((( 1 << 6) - 1) & (value)) << 0)
+      
+/***ASC Write HW Modified Autobaud Control Register***/ 
+#define INCA_IP_ASC_ASC_WHBABCON                 ((volatile u32*)(INCA_IP_ASC+ 0x0054))
+#define INCA_IP_ASC_ASC_WHBABCON_SETABEN                      (1 << 1)
+#define INCA_IP_ASC_ASC_WHBABCON_CLRABEN                      (1 << 0)
+      
+/***ASC Autobaud Status Register***/ 
+#define INCA_IP_ASC_ASC_ABSTAT                   ((volatile u32*)(INCA_IP_ASC+ 0x0034))
+#define INCA_IP_ASC_ASC_ABSTAT_DETWAIT                      (1 << 4)
+#define INCA_IP_ASC_ASC_ABSTAT_SCCDET                        (1 << 3)
+#define INCA_IP_ASC_ASC_ABSTAT_SCSDET                        (1 << 2)
+#define INCA_IP_ASC_ASC_ABSTAT_FCCDET                        (1 << 1)
+#define INCA_IP_ASC_ASC_ABSTAT_FCSDET                        (1 << 0)
+      
+/***ASC Write HW Modified Autobaud Status Register***/ 
+#define INCA_IP_ASC_ASC_WHBABSTAT                 ((volatile u32*)(INCA_IP_ASC+ 0x0058))
+#define INCA_IP_ASC_ASC_WHBABSTAT_SETDETWAIT                (1 << 9)
+#define INCA_IP_ASC_ASC_WHBABSTAT_CLRDETWAIT                (1 << 8)
+#define INCA_IP_ASC_ASC_WHBABSTAT_SETSCCDET                  (1 << 7)
+#define INCA_IP_ASC_ASC_WHBABSTAT_CLRSCCDET                  (1 << 6)
+#define INCA_IP_ASC_ASC_WHBABSTAT_SETSCSDET                  (1 << 5)
+#define INCA_IP_ASC_ASC_WHBABSTAT_CLRSCSDET                  (1 << 4)
+#define INCA_IP_ASC_ASC_WHBABSTAT_SETFCCDET                  (1 << 3)
+#define INCA_IP_ASC_ASC_WHBABSTAT_CLRFCCDET                  (1 << 2)
+#define INCA_IP_ASC_ASC_WHBABSTAT_SETFCSDET                  (1 << 1)
+#define INCA_IP_ASC_ASC_WHBABSTAT_CLRFCSDET                  (1 << 0)
+      
+/***ASC Clock Control Register***/ 
+#define INCA_IP_ASC_ASC_CLC                      ((volatile u32*)(INCA_IP_ASC+ 0x0000))
+#define INCA_IP_ASC_ASC_CLC_RMC (value)                (((( 1 << 8) - 1) & (value)) << 8)
+#define INCA_IP_ASC_ASC_CLC_DISS                            (1 << 1)
+#define INCA_IP_ASC_ASC_CLC_DISR                            (1 << 0)		
+         
+/***********************************************************************/
+/*  Module      :  DMA register address and bits                       */
+/***********************************************************************/
+         
+#define INCA_IP_DMA                          (0xBF108000)
+/***********************************************************************/   
+
+      
+/***DMA RX Channel 0 Command Register***/ 
+#define INCA_IP_DMA_DMA_RXCCR0                   ((volatile u32*)(INCA_IP_DMA+ 0x0800))
+#define INCA_IP_DMA_DMA_RXCCR0_LBE                              (1 << 31)
+#define INCA_IP_DMA_DMA_RXCCR0_HPEN                            (1 << 30)
+#define INCA_IP_DMA_DMA_RXCCR0_INIT                            (1 << 2)
+#define INCA_IP_DMA_DMA_RXCCR0_OFF                              (1 << 1)
+#define INCA_IP_DMA_DMA_RXCCR0_HR                              (1 << 0)
+      
+/***DMA RX Channel 1 Command Register***/ 
+#define INCA_IP_DMA_DMA_RXCCR1                   ((volatile u32*)(INCA_IP_DMA+ 0x0804))
+#define INCA_IP_DMA_DMA_RXCCR1_LBE                              (1 << 31)
+#define INCA_IP_DMA_DMA_RXCCR1_HPEN                            (1 << 30)
+#define INCA_IP_DMA_DMA_RXCCR1_INIT                            (1 << 2)
+#define INCA_IP_DMA_DMA_RXCCR1_OFF                              (1 << 1)
+#define INCA_IP_DMA_DMA_RXCCR1_HR                              (1 << 0)
+      
+/***DMA Receive Interrupt Status Register***/ 
+#define INCA_IP_DMA_DMA_RXISR                    ((volatile u32*)(INCA_IP_DMA+ 0x0808))
+#define INCA_IP_DMA_DMA_RXISR_RDERRx (value)             (((( 1 << 2) - 1) & (value)) << 8)
+#define INCA_IP_DMA_DMA_RXISR_CMDCPTx (value)            (((( 1 << 2) - 1) & (value)) << 6)
+#define INCA_IP_DMA_DMA_RXISR_EOPx (value)               (((( 1 << 2) - 1) & (value)) << 4)
+#define INCA_IP_DMA_DMA_RXISR_CPTx (value)               (((( 1 << 2) - 1) & (value)) << 2)
+#define INCA_IP_DMA_DMA_RXISR_HLDx (value)               (((( 1 << 2) - 1) & (value)) << 0)
+      
+/***DMA Receive Interrupt Mask Register***/ 
+#define INCA_IP_DMA_DMA_RXIMR                    ((volatile u32*)(INCA_IP_DMA+ 0x080C))
+#define INCA_IP_DMA_DMA_RXIMR_RDERRx (value)             (((( 1 << 2) - 1) & (value)) << 8)
+#define INCA_IP_DMA_DMA_RXIMR_CMDCPTx (value)            (((( 1 << 2) - 1) & (value)) << 6)
+#define INCA_IP_DMA_DMA_RXIMR_EOPx (value)               (((( 1 << 2) - 1) & (value)) << 4)
+#define INCA_IP_DMA_DMA_RXIMR_CPTx (value)               (((( 1 << 2) - 1) & (value)) << 2)
+#define INCA_IP_DMA_DMA_RXIMR_HLDx (value)               (((( 1 << 2) - 1) & (value)) << 0)
+      
+/***DMA First Receive Descriptor Addr. for Rx Channel 0
+***/
+#define INCA_IP_DMA_DMA_RXFRDA0                  ((volatile u32*)(INCA_IP_DMA+ 0x0810))
+#define INCA_IP_DMA_DMA_RXFRDA0_RXFRDA (value)             (((( 1 << 28) - 1) & (value)) << 0)
+      
+/***DMA First Receive Descriptor Addr. for Rx Channel 1
+***/
+#define INCA_IP_DMA_DMA_RXFRDA1                  ((volatile u32*)(INCA_IP_DMA+ 0x0814))
+#define INCA_IP_DMA_DMA_RXFRDA1_RXFRDA (value)             (((( 1 << 28) - 1) & (value)) << 0)
+      
+/***DMA Receive Channel Polling Time***/ 
+#define INCA_IP_DMA_DMA_RXPOLL                   ((volatile u32*)(INCA_IP_DMA+ 0x0818))
+#define INCA_IP_DMA_DMA_RXPOLL_BSZ1 (value)               (((( 1 << 2) - 1) & (value)) << 30)
+#define INCA_IP_DMA_DMA_RXPOLL_BSZ0 (value)               (((( 1 << 2) - 1) & (value)) << 28)
+#define INCA_IP_DMA_DMA_RXPOLL_RXPOLLTIME (value)         (((( 1 << 8) - 1) & (value)) << 0)
+      
+/***DMA TX Channel 0 Command Register (Voice Port)***/ 
+#define INCA_IP_DMA_DMA_TXCCR0                   ((volatile u32*)(INCA_IP_DMA+ 0x0880))
+#define INCA_IP_DMA_DMA_TXCCR0_LBE                              (1 << 31)
+#define INCA_IP_DMA_DMA_TXCCR0_HPEN                            (1 << 30)
+#define INCA_IP_DMA_DMA_TXCCR0_HR                              (1 << 2)
+#define INCA_IP_DMA_DMA_TXCCR0_OFF                              (1 << 1)
+#define INCA_IP_DMA_DMA_TXCCR0_INIT                            (1 << 0)
+      
+/***DMA TX Channel 1 Command Register (Mangmt Port)***/ 
+#define INCA_IP_DMA_DMA_TXCCR1                   ((volatile u32*)(INCA_IP_DMA+ 0x0884))
+#define INCA_IP_DMA_DMA_TXCCR1_LBE                              (1 << 31)
+#define INCA_IP_DMA_DMA_TXCCR1_HPEN                            (1 << 30)
+#define INCA_IP_DMA_DMA_TXCCR1_HR                              (1 << 2)
+#define INCA_IP_DMA_DMA_TXCCR1_OFF                              (1 << 1)
+#define INCA_IP_DMA_DMA_TXCCR1_INIT                            (1 << 0)
+      
+/***DMA TX Channel 2 Command Register (SSC Port)***/ 
+#define INCA_IP_DMA_DMA_TXCCR2                   ((volatile u32*)(INCA_IP_DMA+ 0x0888))
+#define INCA_IP_DMA_DMA_TXCCR2_LBE                              (1 << 31)
+#define INCA_IP_DMA_DMA_TXCCR2_HPEN                            (1 << 30)
+#define INCA_IP_DMA_DMA_TXCCR2_HBF                              (1 << 29)
+#define INCA_IP_DMA_DMA_TXCCR2_HR                              (1 << 2)
+#define INCA_IP_DMA_DMA_TXCCR2_OFF                              (1 << 1)
+#define INCA_IP_DMA_DMA_TXCCR2_INIT                            (1 << 0)
+      
+/***DMA First Receive Descriptor Addr. for Tx Channel 0
+***/
+#define INCA_IP_DMA_DMA_TXFRDA0                  ((volatile u32*)(INCA_IP_DMA+ 0x08A0))
+#define INCA_IP_DMA_DMA_TXFRDA0_TXFRDA (value)             (((( 1 << 28) - 1) & (value)) << 0)
+      
+/***DMA First Receive Descriptor Addr. for Tx Channel 1
+***/
+#define INCA_IP_DMA_DMA_TXFRDA1                  ((volatile u32*)(INCA_IP_DMA+ 0x08A4))
+#define INCA_IP_DMA_DMA_TXFRDA1_TXFRDA (value)             (((( 1 << 28) - 1) & (value)) << 0)
+      
+/***DMA First Receive Descriptor Addr. for Tx Channel 2
+***/
+#define INCA_IP_DMA_DMA_TXFRDA2                  ((volatile u32*)(INCA_IP_DMA+ 0x08A8))
+#define INCA_IP_DMA_DMA_TXFRDA2_TXFRDA (value)             (((( 1 << 28) - 1) & (value)) << 0)
+      
+/***DMA Transmit Channel Arbitration Register***/ 
+#define INCA_IP_DMA_DMA_TXWGT                    ((volatile u32*)(INCA_IP_DMA+ 0x08C0))
+#define INCA_IP_DMA_DMA_TXWGT_TX2PR (value)              (((( 1 << 2) - 1) & (value)) << 4)
+#define INCA_IP_DMA_DMA_TXWGT_TX1PRI (value)             (((( 1 << 2) - 1) & (value)) << 2)
+#define INCA_IP_DMA_DMA_TXWGT_TX0PRI (value)             (((( 1 << 2) - 1) & (value)) << 0)
+      
+/***DMA Transmit Channel Polling Time***/ 
+#define INCA_IP_DMA_DMA_TXPOLL                   ((volatile u32*)(INCA_IP_DMA+ 0x08C4))
+#define INCA_IP_DMA_DMA_TXPOLL_BSZ2 (value)               (((( 1 << 2) - 1) & (value)) << 30)
+#define INCA_IP_DMA_DMA_TXPOLL_BSZ1 (value)               (((( 1 << 2) - 1) & (value)) << 28)
+#define INCA_IP_DMA_DMA_TXPOLL_BSZ0 (value)               (((( 1 << 2) - 1) & (value)) << 26)
+#define INCA_IP_DMA_DMA_TXPOLL_TXPOLLTIME (value)         (((( 1 << 8) - 1) & (value)) << 0)
+      
+/***DMA Transmit Interrupt Status Register***/ 
+#define INCA_IP_DMA_DMA_TXISR                    ((volatile u32*)(INCA_IP_DMA+ 0x08C8))
+#define INCA_IP_DMA_DMA_TXISR_RDERRx (value)             (((( 1 << 3) - 1) & (value)) << 12)
+#define INCA_IP_DMA_DMA_TXISR_HLDx (value)               (((( 1 << 3) - 1) & (value)) << 9)
+#define INCA_IP_DMA_DMA_TXISR_CPTx (value)               (((( 1 << 3) - 1) & (value)) << 6)
+#define INCA_IP_DMA_DMA_TXISR_EOPx (value)               (((( 1 << 3) - 1) & (value)) << 3)
+#define INCA_IP_DMA_DMA_TXISR_CMDCPTx (value)            (((( 1 << 3) - 1) & (value)) << 0)
+      
+/***DMA Transmit Interrupt Mask Register***/ 
+#define INCA_IP_DMA_DMA_TXIMR                    ((volatile u32*)(INCA_IP_DMA+ 0x08CC))
+#define INCA_IP_DMA_DMA_TXIMR_RDERRx (value)             (((( 1 << 3) - 1) & (value)) << 12)
+#define INCA_IP_DMA_DMA_TXIMR_HLDx (value)               (((( 1 << 3) - 1) & (value)) << 9)
+#define INCA_IP_DMA_DMA_TXIMR_CPTx (value)               (((( 1 << 3) - 1) & (value)) << 6)
+#define INCA_IP_DMA_DMA_TXIMR_EOPx (value)               (((( 1 << 3) - 1) & (value)) << 3)
+#define INCA_IP_DMA_DMA_TXIMR_CMDCPTx (value)            (((( 1 << 3) - 1) & (value)) << 0)		
+         
+/***********************************************************************/
+/*  Module      :  Debug register address and bits                     */
+/***********************************************************************/
+         
+#define INCA_IP_Debug                        (0xBF106000)
+/***********************************************************************/   
+
+      
+/***MCD Break Bus Switch Register***/ 
+#define INCA_IP_Debug_MCD_BBS                      ((volatile u32*)(INCA_IP_Debug+ 0x0000))
+#define INCA_IP_Debug_MCD_BBS_BTP1                            (1 << 19)
+#define INCA_IP_Debug_MCD_BBS_BTP0                            (1 << 18)
+#define INCA_IP_Debug_MCD_BBS_BSP1                            (1 << 17)
+#define INCA_IP_Debug_MCD_BBS_BSP0                            (1 << 16)
+#define INCA_IP_Debug_MCD_BBS_BT5EN                          (1 << 15)
+#define INCA_IP_Debug_MCD_BBS_BT4EN                          (1 << 14)
+#define INCA_IP_Debug_MCD_BBS_BT5                              (1 << 13)
+#define INCA_IP_Debug_MCD_BBS_BT4                              (1 << 12)
+#define INCA_IP_Debug_MCD_BBS_BS5EN                          (1 << 7)
+#define INCA_IP_Debug_MCD_BBS_BS4EN                          (1 << 6)
+#define INCA_IP_Debug_MCD_BBS_BS5                              (1 << 5)
+#define INCA_IP_Debug_MCD_BBS_BS4                              (1 << 4)
+      
+/***MCD Multiplexer Control Register***/ 
+#define INCA_IP_Debug_MCD_MCR                      ((volatile u32*)(INCA_IP_Debug+ 0x0008))
+#define INCA_IP_Debug_MCD_MCR_MUX5                            (1 << 4)
+#define INCA_IP_Debug_MCD_MCR_MUX4                            (1 << 3)
+#define INCA_IP_Debug_MCD_MCR_MUX1                            (1 << 0)		
+         
+/***********************************************************************/
+/*  Module      :  TSF register address and bits                       */
+/***********************************************************************/
+         
+#define INCA_IP_TSF                          (0xB8000900)
+/***********************************************************************/   
+
+      
+/***TSF Configuration Register (0000H)***/ 
+#define INCA_IP_TSF_TSF_CONF                    ((volatile u32*)(INCA_IP_TSF+ 0x0000))
+#define INCA_IP_TSF_TSF_CONF_PWMEN                          (1 << 2)
+#define INCA_IP_TSF_TSF_CONF_LEDEN                          (1 << 1)
+#define INCA_IP_TSF_TSF_CONF_KEYEN                          (1 << 0)
+      
+/***Key scan Configuration Register (0004H)***/ 
+#define INCA_IP_TSF_KEY_CONF                    ((volatile u32*)(INCA_IP_TSF+ 0x0004))
+#define INCA_IP_TSF_KEY_CONF_SL (value)                (((( 1 << 4) - 1) & (value)) << 0)
+      
+/***Scan Register Line 0 and 1 (0008H)***/ 
+#define INCA_IP_TSF_SREG01                       ((volatile u32*)(INCA_IP_TSF+ 0x0008))
+#define INCA_IP_TSF_SREG01_RES1x (value)              (((( 1 << 12) - 1) & (value)) << 16)
+#define INCA_IP_TSF_SREG01_RES0x (value)              (((( 1 << 13) - 1) & (value)) << 0)
+      
+/***Scan Register Line 2 and 3 (000CH)***/ 
+#define INCA_IP_TSF_SREG23                       ((volatile u32*)(INCA_IP_TSF+ 0x000C))
+#define INCA_IP_TSF_SREG23_RES3x (value)              (((( 1 << 10) - 1) & (value)) << 16)
+#define INCA_IP_TSF_SREG23_RES2x (value)              (((( 1 << 11) - 1) & (value)) << 0)
+      
+/***Scan Register Line 4, 5 and 6 (0010H)***/ 
+#define INCA_IP_TSF_SREG456                      ((volatile u32*)(INCA_IP_TSF+ 0x0010))
+#define INCA_IP_TSF_SREG456_RES6x (value)              (((( 1 << 7) - 1) & (value)) << 24)
+#define INCA_IP_TSF_SREG456_RES5x (value)              (((( 1 << 8) - 1) & (value)) << 16)
+#define INCA_IP_TSF_SREG456_RES4x (value)              (((( 1 << 9) - 1) & (value)) << 0)
+      
+/***Scan Register Line 7 to 12 (0014H)***/ 
+#define INCA_IP_TSF_SREG7to12                    ((volatile u32*)(INCA_IP_TSF+ 0x0014))
+#define INCA_IP_TSF_SREG7to12_RES12x                        (1 << 28)
+#define INCA_IP_TSF_SREG7to12_RES11x (value)             (((( 1 << 2) - 1) & (value)) << 24)
+#define INCA_IP_TSF_SREG7to12_RES10x (value)             (((( 1 << 3) - 1) & (value)) << 20)
+#define INCA_IP_TSF_SREG7to12_RES9x (value)              (((( 1 << 4) - 1) & (value)) << 16)
+#define INCA_IP_TSF_SREG7to12_RES8x (value)              (((( 1 << 5) - 1) & (value)) << 8)
+#define INCA_IP_TSF_SREG7to12_RES7x (value)              (((( 1 << 6) - 1) & (value)) << 0)
+      
+/***LEDMUX Configuration Register (0018H)***/ 
+#define INCA_IP_TSF_LEDMUX_CONF                  ((volatile u32*)(INCA_IP_TSF+ 0x0018))
+#define INCA_IP_TSF_LEDMUX_CONF_ETL1                            (1 << 25)
+#define INCA_IP_TSF_LEDMUX_CONF_ESTA1                          (1 << 24)
+#define INCA_IP_TSF_LEDMUX_CONF_EDPX1                          (1 << 23)
+#define INCA_IP_TSF_LEDMUX_CONF_EACT1                          (1 << 22)
+#define INCA_IP_TSF_LEDMUX_CONF_ESPD1                          (1 << 21)
+#define INCA_IP_TSF_LEDMUX_CONF_ETL0                            (1 << 20)
+#define INCA_IP_TSF_LEDMUX_CONF_ESTA0                          (1 << 19)
+#define INCA_IP_TSF_LEDMUX_CONF_EDPX0                          (1 << 18)
+#define INCA_IP_TSF_LEDMUX_CONF_EACT0                          (1 << 17)
+#define INCA_IP_TSF_LEDMUX_CONF_ESPD0                          (1 << 16)
+#define INCA_IP_TSF_LEDMUX_CONF_INV                              (1 << 1)
+#define INCA_IP_TSF_LEDMUX_CONF_NCOL                            (1 << 0)
+      
+/***LED Register (001CH)***/ 
+#define INCA_IP_TSF_LED_REG                      ((volatile u32*)(INCA_IP_TSF+ 0x001C))
+#define INCA_IP_TSF_LED_REG_Lxy (value)                (((( 1 << 24) - 1) & (value)) << 0)
+      
+/***Pulse Width Modulator 1 and 2 Register (0020H)***/ 
+#define INCA_IP_TSF_PWM12                        ((volatile u32*)(INCA_IP_TSF+ 0x0020))
+#define INCA_IP_TSF_PWM12_PW2PW1 (value)             (((( 1 << NaN) - 1) & (value)) << NaN)		
+         
+/***********************************************************************/
+/*  Module      :  Ports register address and bits                     */
+/***********************************************************************/
+         
+#define INCA_IP_Ports                        (0xB8000A00)
+/***********************************************************************/   
+
+      
+/***Port 1 Data Output Register (0020H)***/ 
+#define INCA_IP_Ports_P1_OUT                       ((volatile u32*)(INCA_IP_Ports+ 0x0020))
+#define INCA_IP_Ports_P1_OUT_P(value)               (1 << value)
+                      
+      
+/***Port 2 Data Output Register (0040H)***/ 
+#define INCA_IP_Ports_P2_OUT                       ((volatile u32*)(INCA_IP_Ports+ 0x0040))
+#define INCA_IP_Ports_P2_OUT_P(value)               (1 << value)
+                      
+      
+/***Port 1 Data Input Register (0024H)***/ 
+#define INCA_IP_Ports_P1_IN                        ((volatile u32*)(INCA_IP_Ports+ 0x0024))
+#define INCA_IP_Ports_P1_IN_P(value)               (1 << value)
+                      
+      
+/***Port 2 Data Input Register (0044H)***/ 
+#define INCA_IP_Ports_P2_IN                        ((volatile u32*)(INCA_IP_Ports+ 0x0044))
+#define INCA_IP_Ports_P2_IN_P(value)               (1 << value)
+                      
+      
+/***Port 1 Direction Register (0028H)***/ 
+#define INCA_IP_Ports_P1_DIR                       ((volatile u32*)(INCA_IP_Ports+ 0x0028))
+#define INCA_IP_Ports_P1_DIR_Port1P(value)         (1 << value)
+                      
+#define INCA_IP_Ports_P1_DIR_Port2Pn (value)          (((( 1 << 16) - 1) & (value)) << 0)
+      
+/***Port 2 Direction Register (0048H)***/ 
+#define INCA_IP_Ports_P2_DIR                       ((volatile u32*)(INCA_IP_Ports+ 0x0048))
+#define INCA_IP_Ports_P2_DIR_Port1P(value)         (1 << value)
+                      
+#define INCA_IP_Ports_P2_DIR_Port2Pn (value)          (((( 1 << 16) - 1) & (value)) << 0)
+      
+/***Port 0 Alternate Function Select Register 0 (000C H)
+***/
+#define INCA_IP_Ports_P0_ALTSEL                    ((volatile u32*)(INCA_IP_Ports+ 0x000C))
+#define INCA_IP_Ports_P0_ALTSEL_Port0P(value)         (1 << value)
+                      
+      
+/***Port 1 Alternate Function Select Register 0 (002C H)
+***/
+#define INCA_IP_Ports_P1_ALTSEL                    ((volatile u32*)(INCA_IP_Ports+ 0x002C))
+#define INCA_IP_Ports_P1_ALTSEL_Port1P(value)         (1 << value)
+                      
+#define INCA_IP_Ports_P1_ALTSEL_Port2P(value)         (1 << value)
+                      
+      
+/***Port 2 Alternate Function Select Register 0 (004C H)
+***/
+#define INCA_IP_Ports_P2_ALTSEL                    ((volatile u32*)(INCA_IP_Ports+ 0x004C))
+#define INCA_IP_Ports_P2_ALTSEL_Port1P(value)         (1 << value)
+                      
+#define INCA_IP_Ports_P2_ALTSEL_Port2P(value)         (1 << value)
+                      
+      
+/***Port 0 Input Schmitt-Trigger Off Register (0010 H)
+***/
+#define INCA_IP_Ports_P0_STOFF                    ((volatile u32*)(INCA_IP_Ports+ 0x0010))
+#define INCA_IP_Ports_P0_STOFF_Port0P(value)         (1 << value)
+                      
+      
+/***Port 1 Input Schmitt-Trigger Off Register (0030 H)
+***/
+#define INCA_IP_Ports_P1_STOFF                    ((volatile u32*)(INCA_IP_Ports+ 0x0030))
+#define INCA_IP_Ports_P1_STOFF_Port1P(value)         (1 << value)
+                      
+#define INCA_IP_Ports_P1_STOFF_Port2P(value)         (1 << value)
+                      
+      
+/***Port 2 Input Schmitt-Trigger Off Register (0050 H)
+***/
+#define INCA_IP_Ports_P2_STOFF                    ((volatile u32*)(INCA_IP_Ports+ 0x0050))
+#define INCA_IP_Ports_P2_STOFF_Port1P(value)         (1 << value)
+                      
+#define INCA_IP_Ports_P2_STOFF_Port2P(value)         (1 << value)
+                      
+      
+/***Port 2 Open Drain Control Register (0054H)***/ 
+#define INCA_IP_Ports_P2_OD                        ((volatile u32*)(INCA_IP_Ports+ 0x0054))
+#define INCA_IP_Ports_P2_OD_Port2P(value)         (1 << value)
+                      
+      
+/***Port 0 Pull Up Device Enable Register (0018 H)***/ 
+#define INCA_IP_Ports_P0_PUDEN                    ((volatile u32*)(INCA_IP_Ports+ 0x0018))
+#define INCA_IP_Ports_P0_PUDEN_Port0P(value)         (1 << value)
+                      
+      
+/***Port 2 Pull Up Device Enable Register (0058 H)***/ 
+#define INCA_IP_Ports_P2_PUDEN                    ((volatile u32*)(INCA_IP_Ports+ 0x0058))
+#define INCA_IP_Ports_P2_PUDEN_Port2P(value)         (1 << value)
+                      
+#define INCA_IP_Ports_P2_PUDEN_Port2P(value)         (1 << value)
+                      
+      
+/***Port 0 Pull Up/Pull Down Select Register (001C H)***/ 
+#define INCA_IP_Ports_P0_PUDSEL                    ((volatile u32*)(INCA_IP_Ports+ 0x001C))
+#define INCA_IP_Ports_P0_PUDSEL_Port0P(value)         (1 << value)
+                      
+      
+/***Port 2 Pull Up/Pull Down Select Register (005C H)***/ 
+#define INCA_IP_Ports_P2_PUDSEL                    ((volatile u32*)(INCA_IP_Ports+ 0x005C))
+#define INCA_IP_Ports_P2_PUDSEL_Port2P(value)         (1 << value)
+                      
+#define INCA_IP_Ports_P2_PUDSEL_Port2P(value)         (1 << value)
+                      		
+         
+/***********************************************************************/
+/*  Module      :  DES/3DES register address and bits                 */
+/***********************************************************************/
+         
+#define INCA_IP_DES_3DES                    (0xB8000800)
+/***********************************************************************/   
+
+      
+/***DES Input Data High Register***/ 
+#define INCA_IP_DES_3DES_DES_IHR                      ((volatile u32*)(INCA_IP_DES_3DES+ 0x0000))
+#define INCA_IP_DES_3DES_DES_IHR_IH(value)               (1 << value)
+                      
+      
+/***DES Input Data Low Register***/ 
+#define INCA_IP_DES_3DES_DES_ILR                      ((volatile u32*)(INCA_IP_DES_3DES+ 0x0004))
+#define INCA_IP_DES_3DES_DES_ILR_IL(value)               (1 << value)
+                      
+      
+/***DES Key #1 High Register***/ 
+#define INCA_IP_DES_3DES_DES_K1HR                    ((volatile u32*)(INCA_IP_DES_3DES+ 0x0008))
+#define INCA_IP_DES_3DES_DES_K1HR_K1H(value)              (1 << value)
+                      
+      
+/***DES Key #1 Low Register***/ 
+#define INCA_IP_DES_3DES_DES_K1LR                    ((volatile u32*)(INCA_IP_DES_3DES+ 0x000C))
+#define INCA_IP_DES_3DES_DES_K1LR_K1L(value)              (1 << value)
+                      
+      
+/***DES Key #2 High Register***/ 
+#define INCA_IP_DES_3DES_DES_K2HR                    ((volatile u32*)(INCA_IP_DES_3DES+ 0x0010))
+#define INCA_IP_DES_3DES_DES_K2HR_K2H(value)              (1 << value)
+                      
+      
+/***DES Key #2 Low Register***/ 
+#define INCA_IP_DES_3DES_DES_K2LR                    ((volatile u32*)(INCA_IP_DES_3DES+ 0x0014))
+#define INCA_IP_DES_3DES_DES_K2LR_K2L(value)              (1 << value)
+                      
+      
+/***DES Key #3 High Register***/ 
+#define INCA_IP_DES_3DES_DES_K3HR                    ((volatile u32*)(INCA_IP_DES_3DES+ 0x0018))
+#define INCA_IP_DES_3DES_DES_K3HR_K3H(value)              (1 << value)
+                      
+      
+/***DES Key #3 Low Register***/ 
+#define INCA_IP_DES_3DES_DES_K3LR                    ((volatile u32*)(INCA_IP_DES_3DES+ 0x001C))
+#define INCA_IP_DES_3DES_DES_K3LR_K3L(value)              (1 << value)
+                      
+      
+/***DES Initialization Vector High Register***/ 
+#define INCA_IP_DES_3DES_DES_IVHR                    ((volatile u32*)(INCA_IP_DES_3DES+ 0x0020))
+#define INCA_IP_DES_3DES_DES_IVHR_IVH(value)              (1 << value)
+                      
+      
+/***DES Initialization Vector Low Register***/ 
+#define INCA_IP_DES_3DES_DES_IVLR                    ((volatile u32*)(INCA_IP_DES_3DES+ 0x0024))
+#define INCA_IP_DES_3DES_DES_IVLR_IVL(value)              (1 << value)
+                      
+      
+/***DES Control Register***/ 
+#define INCA_IP_DES_3DES_DES_CONTROLR                 ((volatile u32*)(INCA_IP_DES_3DES+ 0x0028))
+#define INCA_IP_DES_3DES_DES_CONTROLR_KRE                              (1 << 31)
+#define INCA_IP_DES_3DES_DES_CONTROLR_DAU                              (1 << 16)
+#define INCA_IP_DES_3DES_DES_CONTROLR_F(value)               (1 << value)
+                      
+#define INCA_IP_DES_3DES_DES_CONTROLR_O(value)               (1 << value)
+                      
+#define INCA_IP_DES_3DES_DES_CONTROLR_GO                              (1 << 8)
+#define INCA_IP_DES_3DES_DES_CONTROLR_STP                              (1 << 7)
+#define INCA_IP_DES_3DES_DES_CONTROLR_IEN                              (1 << 6)
+#define INCA_IP_DES_3DES_DES_CONTROLR_BUS                              (1 << 5)
+#define INCA_IP_DES_3DES_DES_CONTROLR_SM                              (1 << 4)
+#define INCA_IP_DES_3DES_DES_CONTROLR_E_D                              (1 << 3)
+#define INCA_IP_DES_3DES_DES_CONTROLR_M(value)               (1 << value)
+                      
+      
+/***DES Output Data High Register***/ 
+#define INCA_IP_DES_3DES_DES_OHR                      ((volatile u32*)(INCA_IP_DES_3DES+ 0x002C))
+#define INCA_IP_DES_3DES_DES_OHR_OH(value)               (1 << value)
+                      
+      
+/***DES Output Data Low Register***/ 
+#define INCA_IP_DES_3DES_DES_OLR                      ((volatile u32*)(INCA_IP_DES_3DES+ 0x0030))
+#define INCA_IP_DES_3DES_DES_OLR_OL(value)               (1 << value)
+                      		
+         
+/***********************************************************************/
+/*  Module      :  AES register address and bits                       */
+/***********************************************************************/
+         
+#define INCA_IP_AES                          (0xB8000880)
+/***********************************************************************/   
+
+      
+/***AES Input Data 3 Register***/ 
+#define INCA_IP_AES_AES_ID3R                    ((volatile u32*)(INCA_IP_AES+ 0x0000))
+#define INCA_IP_AES_AES_ID3R_I(value)               (1 << value)
+                      
+      
+/***AES Input Data 2 Register***/ 
+#define INCA_IP_AES_AES_ID2R                    ((volatile u32*)(INCA_IP_AES+ 0x0000))
+#define INCA_IP_AES_AES_ID2R_I(value)               (1 << value)
+                      
+      
+/***AES Input Data 1 Register***/ 
+#define INCA_IP_AES_AES_ID1R                    ((volatile u32*)(INCA_IP_AES+ 0x0000))
+#define INCA_IP_AES_AES_ID1R_I(value)               (1 << value)
+                      
+      
+/***AES Input Data 0 Register***/ 
+#define INCA_IP_AES_AES_ID0R                    ((volatile u32*)(INCA_IP_AES+ 0x0000))
+#define INCA_IP_AES_AES_ID0R_I(value)               (1 << value)
+                      
+      
+/***AES Output Data 3 Register***/ 
+#define INCA_IP_AES_AES_OD3R                    ((volatile u32*)(INCA_IP_AES+ 0x0000))
+#define INCA_IP_AES_AES_OD3R_O(value)               (1 << value)
+                      
+      
+/***AES Output Data 2 Register***/ 
+#define INCA_IP_AES_AES_OD2R                    ((volatile u32*)(INCA_IP_AES+ 0x0000))
+#define INCA_IP_AES_AES_OD2R_O(value)               (1 << value)
+                      
+      
+/***AES Output Data 1 Register***/ 
+#define INCA_IP_AES_AES_OD1R                    ((volatile u32*)(INCA_IP_AES+ 0x0000))
+#define INCA_IP_AES_AES_OD1R_O(value)               (1 << value)
+                      
+      
+/***AES Output Data 0 Register***/ 
+#define INCA_IP_AES_AES_OD0R                    ((volatile u32*)(INCA_IP_AES+ 0x0000))
+#define INCA_IP_AES_AES_OD0R_O(value)               (1 << value)
+                      
+      
+/***AES Key 7 Register***/ 
+#define INCA_IP_AES_AES_K7R                      ((volatile u32*)(INCA_IP_AES+ 0x0000))
+#define INCA_IP_AES_AES_K7R_K(value)               (1 << value)
+                      
+      
+/***AES Key 6 Register***/ 
+#define INCA_IP_AES_AES_K6R                      ((volatile u32*)(INCA_IP_AES+ 0x0000))
+#define INCA_IP_AES_AES_K6R_K(value)               (1 << value)
+                      
+      
+/***AES Key 5 Register***/ 
+#define INCA_IP_AES_AES_K5R                      ((volatile u32*)(INCA_IP_AES+ 0x0000))
+#define INCA_IP_AES_AES_K5R_K(value)               (1 << value)
+                      
+      
+/***AES Key 4 Register***/ 
+#define INCA_IP_AES_AES_K4R                      ((volatile u32*)(INCA_IP_AES+ 0x0000))
+#define INCA_IP_AES_AES_K4R_K(value)               (1 << value)
+                      
+      
+/***AES Key 3 Register***/ 
+#define INCA_IP_AES_AES_K3R                      ((volatile u32*)(INCA_IP_AES+ 0x0000))
+#define INCA_IP_AES_AES_K3R_K(value)               (1 << value)
+                      
+      
+/***AES Key 2 Register***/ 
+#define INCA_IP_AES_AES_K2R                      ((volatile u32*)(INCA_IP_AES+ 0x0000))
+#define INCA_IP_AES_AES_K2R_K(value)               (1 << value)
+                      
+      
+/***AES Key 1 Register***/ 
+#define INCA_IP_AES_AES_K1R                      ((volatile u32*)(INCA_IP_AES+ 0x0000))
+#define INCA_IP_AES_AES_K1R_K(value)               (1 << value)
+                      
+      
+/***AES Key 0 Register***/ 
+#define INCA_IP_AES_AES_K0R                      ((volatile u32*)(INCA_IP_AES+ 0x0000))
+#define INCA_IP_AES_AES_K0R_K(value)               (1 << value)
+                      
+      
+/***AES Initialization Vector 3 Register***/ 
+#define INCA_IP_AES_AES_IV3R                    ((volatile u32*)(INCA_IP_AES+ 0x0000))
+#define INCA_IP_AES_AES_IV3R_IV(value)               (1 << value)
+                      
+      
+/***AES Initialization Vector 2 Register***/ 
+#define INCA_IP_AES_AES_IV2R                    ((volatile u32*)(INCA_IP_AES+ 0x0000))
+#define INCA_IP_AES_AES_IV2R_IV(value)               (1 << value)
+                      
+      
+/***AES Initialization Vector 1 Register***/ 
+#define INCA_IP_AES_AES_IV1R                    ((volatile u32*)(INCA_IP_AES+ 0x0000))
+#define INCA_IP_AES_AES_IV1R_IV(value)               (1 << value)
+                      
+      
+/***AES Initialization Vector 0 Register***/ 
+#define INCA_IP_AES_AES_IV0R                    ((volatile u32*)(INCA_IP_AES+ 0x0000))
+#define INCA_IP_AES_AES_IV0R_IV (value)                (((( 1 << 32) - 1) &(value)) << 0)
+      
+/***AES Control Register***/ 
+#define INCA_IP_AES_AES_CONTROLR                 ((volatile u32*)(INCA_IP_AES+ 0x0000))
+#define INCA_IP_AES_AES_CONTROLR_KRE                              (1 << 31)
+#define INCA_IP_AES_AES_CONTROLR_DAU                              (1 << 16)
+#define INCA_IP_AES_AES_CONTROLR_PNK                              (1 << 15)
+#define INCA_IP_AES_AES_CONTROLR_F(value)               (1 << value)
+                      
+#define INCA_IP_AES_AES_CONTROLR_O(value)               (1 << value)
+                      
+#define INCA_IP_AES_AES_CONTROLR_GO                              (1 << 8)
+#define INCA_IP_AES_AES_CONTROLR_STP                              (1 << 7)
+#define INCA_IP_AES_AES_CONTROLR_IEN                              (1 << 6)
+#define INCA_IP_AES_AES_CONTROLR_BUS                              (1 << 5)
+#define INCA_IP_AES_AES_CONTROLR_SM                              (1 << 4)
+#define INCA_IP_AES_AES_CONTROLR_E_D                              (1 << 3)
+#define INCA_IP_AES_AES_CONTROLR_KV                              (1 << 2)
+#define INCA_IP_AES_AES_CONTROLR_K(value)               (1 << value)
+                      		
+         
+/***********************************************************************/
+/*  Module      :  I²C register address and bits                       */
+/***********************************************************************/
+         
+#define INCA_IP_IIC                          (0xB8000700)
+/***********************************************************************/   
+
+      
+/***I²C Port Input Select Register***/ 
+#define INCA_IP_IIC_IIC_PISEL                    ((volatile u32*)(INCA_IP_IIC+ 0x0004))
+#define INCA_IP_IIC_IIC_PISEL_SDAIS(value)            (1 << value)
+                      
+#define INCA_IP_IIC_IIC_PISEL_SCLIS(value)            (1 << value)
+                      
+      
+/***I²C Clock Control Register***/ 
+#define INCA_IP_IIC_IIC_CLC                      ((volatile u32*)(INCA_IP_IIC+ 0x0000))
+#define INCA_IP_IIC_IIC_CLC_RMC (value)                (((( 1 << 8) - 1) & (value)) << 8)
+#define INCA_IP_IIC_IIC_CLC_DISS                            (1 << 1)
+#define INCA_IP_IIC_IIC_CLC_DISR                            (1 << 0)
+      
+/***I²C System Control Register***/ 
+#define INCA_IP_IIC_IIC_SYSCON_0                 ((volatile u32*)(INCA_IP_IIC+ 0x0010))
+#define INCA_IP_IIC_IIC_SYSCON_0_WMEN                            (1 << 31)
+#define INCA_IP_IIC_IIC_SYSCON_0_CI (value)                (((( 1 << 2) - 1) & (value)) << 26)
+#define INCA_IP_IIC_IIC_SYSCON_0_STP                              (1 << 25)
+#define INCA_IP_IIC_IIC_SYSCON_0_IGE                              (1 << 24)
+#define INCA_IP_IIC_IIC_SYSCON_0_TRX                              (1 << 23)
+#define INCA_IP_IIC_IIC_SYSCON_0_INT                              (1 << 22)
+#define INCA_IP_IIC_IIC_SYSCON_0_ACKDIS                        (1 << 21)
+#define INCA_IP_IIC_IIC_SYSCON_0_BUM                              (1 << 20)
+#define INCA_IP_IIC_IIC_SYSCON_0_MOD (value)                (((( 1 << 2) - 1) & (value)) << 18)
+#define INCA_IP_IIC_IIC_SYSCON_0_RSC                              (1 << 17)
+#define INCA_IP_IIC_IIC_SYSCON_0_M10                              (1 << 16)
+#define INCA_IP_IIC_IIC_SYSCON_0_RMEN                            (1 << 15)
+#define INCA_IP_IIC_IIC_SYSCON_0_CO (value)                (((( 1 << 3) - 1) & (value)) << 8)
+#define INCA_IP_IIC_IIC_SYSCON_0_IRQE                            (1 << 7)
+#define INCA_IP_IIC_IIC_SYSCON_0_IRQP                            (1 << 6)
+#define INCA_IP_IIC_IIC_SYSCON_0_IRQD                            (1 << 5)
+#define INCA_IP_IIC_IIC_SYSCON_0_BB                              (1 << 4)
+#define INCA_IP_IIC_IIC_SYSCON_0_LRB                              (1 << 3)
+#define INCA_IP_IIC_IIC_SYSCON_0_SLA                              (1 << 2)
+#define INCA_IP_IIC_IIC_SYSCON_0_AL                              (1 << 1)
+#define INCA_IP_IIC_IIC_SYSCON_0_ADR                              (1 << 0)
+      
+/***I²C System Control Register***/ 
+#define INCA_IP_IIC_IIC_SYSCON_1                 ((volatile u32*)(INCA_IP_IIC+ 0x0010))
+#define INCA_IP_IIC_IIC_SYSCON_1_RM (value)                (((( 1 << 8) - 1) & (value)) << 24)
+#define INCA_IP_IIC_IIC_SYSCON_1_TRX                              (1 << 23)
+#define INCA_IP_IIC_IIC_SYSCON_1_INT                              (1 << 22)
+#define INCA_IP_IIC_IIC_SYSCON_1_ACKDIS                        (1 << 21)
+#define INCA_IP_IIC_IIC_SYSCON_1_BUM                              (1 << 20)
+#define INCA_IP_IIC_IIC_SYSCON_1_MOD (value)                (((( 1 << 2) - 1) & (value)) << 18)
+#define INCA_IP_IIC_IIC_SYSCON_1_RSC                              (1 << 17)
+#define INCA_IP_IIC_IIC_SYSCON_1_M10                              (1 << 16)
+#define INCA_IP_IIC_IIC_SYSCON_1_RMEN                            (1 << 15)
+#define INCA_IP_IIC_IIC_SYSCON_1_CO (value)                (((( 1 << 3) - 1) & (value)) << 8)
+#define INCA_IP_IIC_IIC_SYSCON_1_IRQE                            (1 << 7)
+#define INCA_IP_IIC_IIC_SYSCON_1_IRQP                            (1 << 6)
+#define INCA_IP_IIC_IIC_SYSCON_1_IRQD                            (1 << 5)
+#define INCA_IP_IIC_IIC_SYSCON_1_BB                              (1 << 4)
+#define INCA_IP_IIC_IIC_SYSCON_1_LRB                              (1 << 3)
+#define INCA_IP_IIC_IIC_SYSCON_1_SLA                              (1 << 2)
+#define INCA_IP_IIC_IIC_SYSCON_1_AL                              (1 << 1)
+#define INCA_IP_IIC_IIC_SYSCON_1_ADR                              (1 << 0)
+      
+/***I²C System Control Register***/ 
+#define INCA_IP_IIC_IIC_SYSCON_2                 ((volatile u32*)(INCA_IP_IIC+ 0x0010))
+#define INCA_IP_IIC_IIC_SYSCON_2_WMEN                            (1 << 31)
+#define INCA_IP_IIC_IIC_SYSCON_2_CI (value)                (((( 1 << 2) - 1) & (value)) << 26)
+#define INCA_IP_IIC_IIC_SYSCON_2_STP                              (1 << 25)
+#define INCA_IP_IIC_IIC_SYSCON_2_IGE                              (1 << 24)
+#define INCA_IP_IIC_IIC_SYSCON_2_TRX                              (1 << 23)
+#define INCA_IP_IIC_IIC_SYSCON_2_INT                              (1 << 22)
+#define INCA_IP_IIC_IIC_SYSCON_2_ACKDIS                        (1 << 21)
+#define INCA_IP_IIC_IIC_SYSCON_2_BUM                              (1 << 20)
+#define INCA_IP_IIC_IIC_SYSCON_2_MOD (value)                (((( 1 << 2) - 1) & (value)) << 18)
+#define INCA_IP_IIC_IIC_SYSCON_2_RSC                              (1 << 17)
+#define INCA_IP_IIC_IIC_SYSCON_2_M10                              (1 << 16)
+#define INCA_IP_IIC_IIC_SYSCON_2_WM (value)                (((( 1 << 8) - 1) & (value)) << 8)
+#define INCA_IP_IIC_IIC_SYSCON_2_IRQE                            (1 << 7)
+#define INCA_IP_IIC_IIC_SYSCON_2_IRQP                            (1 << 6)
+#define INCA_IP_IIC_IIC_SYSCON_2_IRQD                            (1 << 5)
+#define INCA_IP_IIC_IIC_SYSCON_2_BB                              (1 << 4)
+#define INCA_IP_IIC_IIC_SYSCON_2_LRB                              (1 << 3)
+#define INCA_IP_IIC_IIC_SYSCON_2_SLA                              (1 << 2)
+#define INCA_IP_IIC_IIC_SYSCON_2_AL                              (1 << 1)
+#define INCA_IP_IIC_IIC_SYSCON_2_ADR                              (1 << 0)
+      
+/***I²C Write Hardware Modified System Control Register
+***/
+#define INCA_IP_IIC_IIC_WHBSYSCON                 ((volatile u32*)(INCA_IP_IIC+ 0x0020))
+#define INCA_IP_IIC_IIC_WHBSYSCON_CLRWMEN                      (1 << 31)
+#define INCA_IP_IIC_IIC_WHBSYSCON_SETWMEN                      (1 << 30)
+#define INCA_IP_IIC_IIC_WHBSYSCON_SETSTP                        (1 << 26)
+#define INCA_IP_IIC_IIC_WHBSYSCON_CLRSTP                        (1 << 25)
+#define INCA_IP_IIC_IIC_WHBSYSCON_SETTRX                        (1 << 24)
+#define INCA_IP_IIC_IIC_WHBSYSCON_CLRTRX                        (1 << 23)
+#define INCA_IP_IIC_IIC_WHBSYSCON_SETACKDIS                  (1 << 22)
+#define INCA_IP_IIC_IIC_WHBSYSCON_CLRACKDIS                  (1 << 21)
+#define INCA_IP_IIC_IIC_WHBSYSCON_SETBUM                        (1 << 20)
+#define INCA_IP_IIC_IIC_WHBSYSCON_CLRBUM                        (1 << 19)
+#define INCA_IP_IIC_IIC_WHBSYSCON_SETRSC                        (1 << 17)
+#define INCA_IP_IIC_IIC_WHBSYSCON_CLRRSC                        (1 << 16)
+#define INCA_IP_IIC_IIC_WHBSYSCON_SETRMEN                      (1 << 15)
+#define INCA_IP_IIC_IIC_WHBSYSCON_CLRRMEN                      (1 << 14)
+#define INCA_IP_IIC_IIC_WHBSYSCON_SETIRQE                      (1 << 10)
+#define INCA_IP_IIC_IIC_WHBSYSCON_SETIRQP                      (1 << 9)
+#define INCA_IP_IIC_IIC_WHBSYSCON_SETIRQD                      (1 << 8)
+#define INCA_IP_IIC_IIC_WHBSYSCON_CLRIRQE                      (1 << 7)
+#define INCA_IP_IIC_IIC_WHBSYSCON_CLRIRQP                      (1 << 6)
+#define INCA_IP_IIC_IIC_WHBSYSCON_CLRIRQD                      (1 << 5)
+#define INCA_IP_IIC_IIC_WHBSYSCON_SETAL                          (1 << 2)
+#define INCA_IP_IIC_IIC_WHBSYSCON_CLRAL                          (1 << 1)
+      
+/***I²C Bus Control Register***/ 
+#define INCA_IP_IIC_IIC_BUSCON_0                 ((volatile u32*)(INCA_IP_IIC+ 0x0014))
+#define INCA_IP_IIC_IIC_BUSCON_0_BRPMOD                        (1 << 31)
+#define INCA_IP_IIC_IIC_BUSCON_0_PREDIV (value)             (((( 1 << 2) - 1) & (value)) << 29)
+#define INCA_IP_IIC_IIC_BUSCON_0_ICA9_0 (value)             (((( 1 << 10) - 1) & (value)) << 16)
+#define INCA_IP_IIC_IIC_BUSCON_0_BRP (value)                (((( 1 << 8) - 1) & (value)) << 8)
+#define INCA_IP_IIC_IIC_BUSCON_0_SCLEN(value)            (1 << value)
+                      
+#define INCA_IP_IIC_IIC_BUSCON_0_SDAEN(value)            (1 << value)
+                      
+      
+/***I²C Bus Control Register***/ 
+#define INCA_IP_IIC_IIC_BUSCON_1                 ((volatile u32*)(INCA_IP_IIC+ 0x0014))
+#define INCA_IP_IIC_IIC_BUSCON_1_BRPMOD                        (1 << 31)
+#define INCA_IP_IIC_IIC_BUSCON_1_PREDIV (value)             (((( 1 << 2) - 1) & (value)) << 29)
+#define INCA_IP_IIC_IIC_BUSCON_1_ICA7_1 (value)             (((( 1 << 7) - 1) & (value)) << 17)
+#define INCA_IP_IIC_IIC_BUSCON_1_BRP (value)                (((( 1 << 8) - 1) & (value)) << 8)
+#define INCA_IP_IIC_IIC_BUSCON_1_SCLEN(value)            (1 << value)
+                      
+#define INCA_IP_IIC_IIC_BUSCON_1_SDAEN(value)            (1 << value)
+                      
+      
+/***I²C Receive Transmit Buffer***/ 
+#define INCA_IP_IIC_IIC_RTB                      ((volatile u32*)(INCA_IP_IIC+ 0x0018))
+#define INCA_IP_IIC_IIC_RTB_RTB(value)              (1 << value)
+                      		
+         
+/***********************************************************************/
+/*  Module      :  FB register address and bits                       */
+/***********************************************************************/
+         
+#define INCA_IP_FB                          (0xBF880000)
+/***********************************************************************/   
+
+      
+/***FB Access Error Cause Register***/ 
+#define INCA_IP_FB_FB_ERRCAUSE                  ((volatile u32*)(INCA_IP_FB+ 0x0100))
+#define INCA_IP_FB_FB_ERRCAUSE_ERR                              (1 << 31)
+#define INCA_IP_FB_FB_ERRCAUSE_PORT (value)               (((( 1 << 4) - 1) & (value)) << 16)
+#define INCA_IP_FB_FB_ERRCAUSE_CAUSE (value)              (((( 1 << 2) - 1) & (value)) << 0)
+      
+/***FB Access Error Address Register***/ 
+#define INCA_IP_FB_FB_ERRADDR                   ((volatile u32*)(INCA_IP_FB+ 0x0108))
+#define INCA_IP_FB_FB_ERRADDR_ADDR
+      
+/***FB Configuration Register***/ 
+#define INCA_IP_FB_FB_CFG                       ((volatile u32*)(INCA_IP_FB+ 0x0800))
+#define INCA_IP_FB_FB_CFG_SVM                              (1 << 0)		
+         
+/***********************************************************************/
+/*  Module      :  SRAM register address and bits                      */
+/***********************************************************************/
+         
+#define INCA_IP_SRAM                         (0xBF980000)
+/***********************************************************************/   
+
+      
+/***SRAM Size Register***/ 
+#define INCA_IP_SRAM_SRAM_SIZE                    ((volatile u32*)(INCA_IP_SRAM+ 0x0800))
+#define INCA_IP_SRAM_SRAM_SIZE_SIZE (value)               (((( 1 << 23) - 1) & (value)) << 0)		
+         
+/***********************************************************************/
+/*  Module      :  BIU register address and bits                       */
+/***********************************************************************/
+         
+#define INCA_IP_BIU                          (0xBFA80000)
+/***********************************************************************/   
+
+      
+/***BIU Identification Register***/ 
+#define INCA_IP_BIU_BIU_ID                       ((volatile u32*)(INCA_IP_BIU+ 0x0000))
+#define INCA_IP_BIU_BIU_ID_ARCH                            (1 << 16)
+#define INCA_IP_BIU_BIU_ID_ID (value)                (((( 1 << 8) - 1) & (value)) << 8)
+#define INCA_IP_BIU_BIU_ID_REV (value)                (((( 1 << 8) - 1) & (value)) << 0)
+      
+/***BIU Access Error Cause Register***/ 
+#define INCA_IP_BIU_BIU_ERRCAUSE                 ((volatile u32*)(INCA_IP_BIU+ 0x0100))
+#define INCA_IP_BIU_BIU_ERRCAUSE_ERR                              (1 << 31)
+#define INCA_IP_BIU_BIU_ERRCAUSE_PORT (value)               (((( 1 << 4) - 1) & (value)) << 16)
+#define INCA_IP_BIU_BIU_ERRCAUSE_CAUSE (value)              (((( 1 << 2) - 1) & (value)) << 0)
+      
+/***BIU Access Error Address Register***/ 
+#define INCA_IP_BIU_BIU_ERRADDR                  ((volatile u32*)(INCA_IP_BIU+ 0x0108))
+#define INCA_IP_BIU_BIU_ERRADDR_ADDR		
+         
+/***********************************************************************/
+/*  Module      :  ICU register address and bits                       */
+/***********************************************************************/
+         
+#define INCA_IP_ICU                          (0xBF101000)
+/***********************************************************************/   
+
+      
+/***IM0 Interrupt Status Register***/ 
+#define INCA_IP_ICU_IM0_ISR                      ((volatile u32*)(INCA_IP_ICU+ 0x0000))
+#define INCA_IP_ICU_IM0_ISR_IR(value)               (1 << value)
+                      
+      
+/***IM1 Interrupt Status Register***/ 
+#define INCA_IP_ICU_IM1_ISR                      ((volatile u32*)(INCA_IP_ICU+ 0x0200))
+#define INCA_IP_ICU_IM1_ISR_IR(value)               (1 << value)
+                      
+      
+/***IM2 Interrupt Status Register***/ 
+#define INCA_IP_ICU_IM2_ISR                      ((volatile u32*)(INCA_IP_ICU+ 0x0400))
+#define INCA_IP_ICU_IM2_ISR_IR(value)               (1 << value)
+                      
+      
+/***IM0 Interrupt Enable Register***/ 
+#define INCA_IP_ICU_IM0_IER                      ((volatile u32*)(INCA_IP_ICU+ 0x0008))
+#define INCA_IP_ICU_IM0_IER_IR(value)               (1 << value)
+                      
+      
+/***IM1 Interrupt Enable Register***/ 
+#define INCA_IP_ICU_IM1_IER                      ((volatile u32*)(INCA_IP_ICU+ 0x0208))
+#define INCA_IP_ICU_IM1_IER_IR(value)               (1 << value)
+                      
+      
+/***IM2 Interrupt Enable Register***/ 
+#define INCA_IP_ICU_IM2_IER                      ((volatile u32*)(INCA_IP_ICU+ 0x0408))
+#define INCA_IP_ICU_IM2_IER_IR(value)               (1 << value)
+                      
+      
+/***IM0 Interrupt Output Status Register***/ 
+#define INCA_IP_ICU_IM0_IOSR                    ((volatile u32*)(INCA_IP_ICU+ 0x0010))
+#define INCA_IP_ICU_IM0_IOSR_IR(value)               (1 << value)
+                      
+      
+/***IM1 Interrupt Output Status Register***/ 
+#define INCA_IP_ICU_IM1_IOSR                    ((volatile u32*)(INCA_IP_ICU+ 0x0210))
+#define INCA_IP_ICU_IM1_IOSR_IR(value)               (1 << value)
+                      
+      
+/***IM2 Interrupt Output Status Register***/ 
+#define INCA_IP_ICU_IM2_IOSR                    ((volatile u32*)(INCA_IP_ICU+ 0x0410))
+#define INCA_IP_ICU_IM2_IOSR_IR(value)               (1 << value)
+                      
+      
+/***IM0 Interrupt Request Set Register***/ 
+#define INCA_IP_ICU_IM0_IRSR                    ((volatile u32*)(INCA_IP_ICU+ 0x0018))
+#define INCA_IP_ICU_IM0_IRSR_IR(value)               (1 << value)
+                      
+      
+/***IM1 Interrupt Request Set Register***/ 
+#define INCA_IP_ICU_IM1_IRSR                    ((volatile u32*)(INCA_IP_ICU+ 0x0218))
+#define INCA_IP_ICU_IM1_IRSR_IR(value)               (1 << value)
+                      
+      
+/***IM2 Interrupt Request Set Register***/ 
+#define INCA_IP_ICU_IM2_IRSR                    ((volatile u32*)(INCA_IP_ICU+ 0x0418))
+#define INCA_IP_ICU_IM2_IRSR_IR(value)               (1 << value)
+                      
+      
+/***External Interrupt Control Register***/ 
+#define INCA_IP_ICU_ICU_EICR                    ((volatile u32*)(INCA_IP_ICU+ 0x0B00))
+#define INCA_IP_ICU_ICU_EICR_EII5 (value)               (((( 1 << 3) - 1) & (value)) << 20)
+#define INCA_IP_ICU_ICU_EICR_EII4 (value)               (((( 1 << 3) - 1) & (value)) << 16)
+#define INCA_IP_ICU_ICU_EICR_EII3 (value)               (((( 1 << 3) - 1) & (value)) << 12)
+#define INCA_IP_ICU_ICU_EICR_EII2 (value)               (((( 1 << 3) - 1) & (value)) << 8)
+#define INCA_IP_ICU_ICU_EICR_EII1 (value)               (((( 1 << 3) - 1) & (value)) << 4)
+#define INCA_IP_ICU_ICU_EICR_EII0 (value)               (((( 1 << 3) - 1) & (value)) << 0)
diff --git a/include/configs/incaip.h b/include/configs/incaip.h
new file mode 100644
index 0000000000..bc0db84e23
--- /dev/null
+++ b/include/configs/incaip.h
@@ -0,0 +1,107 @@
+/*
+ * (C) Copyright 2003
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*
+ * This file contains the configuration parameters for the INCA-IP board.
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+#define CONFIG_MIPS32		1	/* MIPS 4Kc CPU core	*/
+#define CONFIG_INCA_IP		1	/* on a INCA-IP Board	*/
+
+/* allowed values: 100000000 and 150000000 */
+#define CPU_CLOCK_RATE	150000000   /* 150 MHz clock for the MIPS core */
+
+#define CONFIG_BAUDRATE		115200
+
+#define CFG_SDRAM_BASE		0x80000000
+
+#define CFG_MALLOC_LEN		128*1024
+
+#define CFG_BOOTPARAMS_LEN	128*1024
+
+/* valid baudrates */
+#define CFG_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
+
+#define CONFIG_COMMANDS		(CONFIG_CMD_DFL | CFG_CMD_ELF)
+#include <cmd_confdefs.h>
+
+/*
+ * Miscellaneous configurable options
+ */
+#define	CFG_LONGHELP				/* undef to save memory      */
+#define	CFG_PROMPT		"INCA-IP # "	/* Monitor Command Prompt    */
+#define	CFG_CBSIZE		256		/* Console I/O Buffer Size   */
+#define	CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16)  /* Print Buffer Size */
+#define CFG_HZ			(CPU_CLOCK_RATE/2)
+#define	CFG_MAXARGS		16		/* max number of command args*/
+
+#define	CFG_LOAD_ADDR		0x80100000	/* default load address	*/
+
+#define CFG_MEMTEST_START	0x80200000
+#define CFG_MEMTEST_END		0x80800000
+
+/*-----------------------------------------------------------------------
+ * FLASH and environment organization
+ */
+#define CFG_MAX_FLASH_BANKS	2	/* max number of memory banks */
+#define CFG_MAX_FLASH_SECT	(128)	/* max number of sectors on one chip */
+
+#define PHYS_FLASH_1		0xb0000000 /* Flash Bank #1 */
+#define PHYS_FLASH_2		0xb0800000 /* Flash Bank #2 */
+
+/* The following #defines are needed to get flash environment right */
+#define	CFG_MONITOR_BASE	TEXT_BASE
+#define	CFG_MONITOR_LEN		(192 << 10)
+
+#define CFG_INIT_SP_OFFSET	0x400000
+
+#define CFG_FLASH_BASE		PHYS_FLASH_1
+
+/* timeout values are in ticks */
+#define CFG_FLASH_ERASE_TOUT	(2 * CFG_HZ) /* Timeout for Flash Erase */
+#define CFG_FLASH_WRITE_TOUT	(2 * CFG_HZ) /* Timeout for Flash Write */
+
+#define	CFG_ENV_IS_IN_FLASH	1
+
+/* Address and size of Primary Environment Sector	*/
+#define CFG_ENV_ADDR		0xB0030000
+#define CFG_ENV_SIZE		0x10000
+
+#define CONFIG_FLASH_16BIT
+
+#define CONFIG_NR_DRAM_BANKS	1
+
+#define CONFIG_INCA_IP_SWITCH
+#define CONFIG_NET_MULTI
+
+/*-----------------------------------------------------------------------
+ * Cache Configuration
+ */
+#define CFG_DCACHE_SIZE		4096
+#define CFG_ICACHE_SIZE		4096
+#define CFG_CACHELINE_SIZE	16
+
+#endif	/* __CONFIG_H */
diff --git a/lib_mips/Makefile b/lib_mips/Makefile
new file mode 100644
index 0000000000..540383ddf7
--- /dev/null
+++ b/lib_mips/Makefile
@@ -0,0 +1,44 @@
+#
+# (C) Copyright 2003
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB	= lib$(ARCH).a
+
+AOBJS	= 
+
+COBJS	= board.o time.o mips_linux.o
+
+OBJS	= $(AOBJS) $(COBJS)
+
+$(LIB):	.depend $(OBJS)
+	$(AR) crv $@ $(OBJS)
+
+#########################################################################
+
+.depend:	Makefile $(AOBJS:.o=.S) $(COBJS:.o=.c)
+		$(CC) -M $(CFLAGS) $(AOBJS:.o=.S) $(COBJS:.o=.c) > $@
+
+sinclude .depend
+
+#########################################################################
diff --git a/lib_mips/board.c b/lib_mips/board.c
new file mode 100644
index 0000000000..81909d37d0
--- /dev/null
+++ b/lib_mips/board.c
@@ -0,0 +1,403 @@
+/*
+ * (C) Copyright 2003
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <command.h>
+#include <malloc.h>
+#include <devices.h>
+#include <syscall.h>
+#include <version.h>
+#include <net.h>
+#include <environment.h>
+
+#if ( ((CFG_ENV_ADDR+CFG_ENV_SIZE) < CFG_MONITOR_BASE) || \
+      (CFG_ENV_ADDR >= (CFG_MONITOR_BASE + CFG_MONITOR_LEN)) ) || \
+    defined(CFG_ENV_IS_IN_NVRAM)
+#define	TOTAL_MALLOC_LEN	(CFG_MALLOC_LEN + CFG_ENV_SIZE)
+#else
+#define	TOTAL_MALLOC_LEN	CFG_MALLOC_LEN
+#endif
+
+#undef DEBUG
+
+extern int timer_init(void);
+
+const char version_string[] =
+	U_BOOT_VERSION" (" __DATE__ " - " __TIME__ ")";
+
+static char *failed = "*** failed ***\n";
+
+/*
+ * Begin and End of memory area for malloc(), and current "brk"
+ */
+static ulong mem_malloc_start;
+static ulong mem_malloc_end;
+static ulong mem_malloc_brk;
+
+
+/*
+ * The Malloc area is immediately below the monitor copy in DRAM
+ */
+static void mem_malloc_init (void)
+{
+	DECLARE_GLOBAL_DATA_PTR;
+
+	ulong dest_addr = CFG_MONITOR_BASE + gd->reloc_off;
+
+	mem_malloc_end = dest_addr;
+	mem_malloc_start = dest_addr - TOTAL_MALLOC_LEN;
+	mem_malloc_brk = mem_malloc_start;
+
+	memset ((void *) mem_malloc_start,
+		0,
+		mem_malloc_end - mem_malloc_start);
+}
+
+void *sbrk (ptrdiff_t increment)
+{
+	ulong old = mem_malloc_brk;
+	ulong new = old + increment;
+
+	if ((new < mem_malloc_start) || (new > mem_malloc_end)) {
+		return (NULL);
+	}
+	mem_malloc_brk = new;
+	return ((void *) old);
+}
+
+
+static int init_func_ram (void)
+{
+	DECLARE_GLOBAL_DATA_PTR;
+
+#ifdef	CONFIG_BOARD_TYPES
+	int board_type = gd->board_type;
+#else
+	int board_type = 0;	/* use dummy arg */
+#endif
+	puts ("DRAM:  ");
+
+	if ((gd->ram_size = initdram (board_type)) > 0) {
+		print_size (gd->ram_size, "\n");
+		return (0);
+	}
+	puts (failed);
+	return (1);
+}
+
+static int display_banner(void)
+{
+
+	printf ("\n\n%s\n\n", version_string);
+	return (0);
+}
+
+static void display_flash_config(ulong size)
+{
+	puts ("Flash: ");
+	print_size (size, "\n");
+}
+
+
+static int init_baudrate (void)
+{
+	DECLARE_GLOBAL_DATA_PTR;
+
+	uchar tmp[64];	/* long enough for environment variables */
+	int i = getenv_r ("baudrate", tmp, sizeof (tmp));
+
+	gd->baudrate = (i > 0)
+			? (int) simple_strtoul (tmp, NULL, 10)
+			: CONFIG_BAUDRATE;
+
+	return (0);
+}
+
+
+/*
+ * Breath some life into the board...
+ *
+ * The first part of initialization is running from Flash memory;
+ * its main purpose is to initialize the RAM so that we
+ * can relocate the monitor code to RAM.
+ */
+
+/*
+ * All attempts to come up with a "common" initialization sequence
+ * that works for all boards and architectures failed: some of the
+ * requirements are just _too_ different. To get rid of the resulting
+ * mess of board dependend #ifdef'ed code we now make the whole
+ * initialization sequence configurable to the user.
+ *
+ * The requirements for any new initalization function is simple: it
+ * receives a pointer to the "global data" structure as it's only
+ * argument, and returns an integer return code, where 0 means
+ * "continue" and != 0 means "fatal error, hang the system".
+ */
+typedef int (init_fnc_t) (void);
+
+init_fnc_t *init_sequence[] = {
+	timer_init,
+	env_init,		/* initialize environment */
+	init_baudrate,		/* initialze baudrate settings */
+	serial_init,		/* serial communications setup */
+	console_init_f,
+	display_banner,		/* say that we are here */
+	init_func_ram,
+	NULL,
+};
+
+
+void board_init_f(ulong bootflag)
+{
+	DECLARE_GLOBAL_DATA_PTR;
+
+	gd_t gd_data, *id;
+	bd_t *bd;
+	init_fnc_t **init_fnc_ptr;
+	ulong addr, addr_sp, len   = CFG_MONITOR_LEN;
+
+		/* Pointer is writable since we allocated a register for it.
+		 */
+	gd = &gd_data;
+	memset (gd, 0, sizeof (gd_t));
+
+	for (init_fnc_ptr = init_sequence; *init_fnc_ptr; ++init_fnc_ptr) {
+		if ((*init_fnc_ptr)() != 0) {
+			hang ();
+		}
+	}
+
+	/*
+	 * Now that we have DRAM mapped and working, we can
+	 * relocate the code and continue running from DRAM.
+	 */
+	addr = CFG_SDRAM_BASE + gd->ram_size;
+
+		/* We can reserve some RAM "on top" here.
+		 */
+
+		/* round down to next 4 kB limit.
+		 */
+	addr &= ~(4096 - 1);
+#ifdef DEBUG
+	printf ("Top of RAM usable for U-Boot at: %08lx\n", addr);
+#endif
+	 
+		/* Reserve memory for U-Boot code, data & bss
+		 * round down to next 4 kB limit
+		 */
+	addr -= len;
+	addr &= ~(4096 - 1);
+
+#ifdef DEBUG
+	printf ("Reserving %ldk for U-Boot at: %08lx\n", len >> 10, addr);
+#endif
+
+	 	/* Reserve memory for malloc() arena.
+		 */
+	addr_sp = addr - TOTAL_MALLOC_LEN;
+#ifdef DEBUG
+	printf ("Reserving %dk for malloc() at: %08lx\n",
+			TOTAL_MALLOC_LEN >> 10, addr_sp);
+#endif
+
+	/*
+	 * (permanently) allocate a Board Info struct
+	 * and a permanent copy of the "global" data
+	 */
+	addr_sp -= sizeof(bd_t);
+	bd = (bd_t *)addr_sp;
+	gd->bd = bd;
+#ifdef DEBUG
+	printf ("Reserving %d Bytes for Board Info at: %08lx\n",
+			sizeof(bd_t), addr_sp);
+#endif
+	addr_sp -= sizeof(gd_t);
+	id = (gd_t *)addr_sp;
+#ifdef DEBUG
+	printf ("Reserving %d Bytes for Global Data at: %08lx\n",
+			sizeof (gd_t), addr_sp);
+#endif
+
+	 	/* Reserve memory for boot params.
+		 */
+	addr_sp -= CFG_BOOTPARAMS_LEN;
+	bd->bi_boot_params = addr_sp;
+#ifdef DEBUG
+	printf ("Reserving %dk for malloc() at: %08lx\n",
+			CFG_BOOTPARAMS_LEN >> 10, addr_sp);
+#endif
+
+	/*
+	 * Finally, we set up a new (bigger) stack.
+	 *
+	 * Leave some safety gap for SP, force alignment on 16 byte boundary
+	 * Clear initial stack frame
+	 */
+	addr_sp -= 16;
+	addr_sp &= ~0xF;
+	*((ulong *) addr_sp)-- = 0;
+	*((ulong *) addr_sp)-- = 0;
+#ifdef DEBUG
+	printf ("Stack Pointer at: %08lx\n", addr_sp);
+#endif
+	/*
+	 * Save local variables to board info struct
+	 */
+	bd->bi_memstart	= CFG_SDRAM_BASE;	/* start of  DRAM memory */
+	bd->bi_memsize	= gd->ram_size;		/* size  of  DRAM memory in bytes */
+	bd->bi_baudrate	= gd->baudrate;		/* Console Baudrate */
+
+	memcpy (id, gd, sizeof (gd_t));
+	relocate_code (addr_sp, id, addr);
+
+	/* NOTREACHED - relocate_code() does not return */
+}
+/************************************************************************
+ *
+ * This is the next part if the initialization sequence: we are now
+ * running from RAM and have a "normal" C environment, i. e. global
+ * data can be written, BSS has been cleared, the stack size in not
+ * that critical any more, etc.
+ *
+ ************************************************************************
+ */
+
+void board_init_r (gd_t *id, ulong dest_addr)
+{
+	DECLARE_GLOBAL_DATA_PTR;
+
+	cmd_tbl_t *cmdtp;
+	ulong size;
+	extern void malloc_bin_reloc (void);
+#ifndef CFG_ENV_IS_NOWHERE
+	extern char * env_name_spec;
+#endif
+	char *s, *e;
+	bd_t *bd;
+	int i;
+
+	gd = id;
+	gd->flags |= GD_FLG_RELOC;	/* tell others: relocation done */
+
+#ifdef DEBUG
+	printf ("Now running in RAM - U-Boot at: %08lx\n", dest_addr);
+#endif
+
+	gd->reloc_off = dest_addr - CFG_MONITOR_BASE;
+
+	/*
+	 * We have to relocate the command table manually
+	 */
+	for (cmdtp = &cmd_tbl[0]; cmdtp->name; cmdtp++) {
+		ulong addr;
+
+		addr = (ulong) (cmdtp->cmd) + gd->reloc_off;
+#if 0
+		printf ("Command \"%s\": 0x%08lx => 0x%08lx\n",
+				cmdtp->name, (ulong) (cmdtp->cmd), addr);
+#endif
+		cmdtp->cmd =
+			(int (*)(struct cmd_tbl_s *, int, int, char *[]))addr;
+
+		addr = (ulong)(cmdtp->name) + gd->reloc_off;
+		cmdtp->name = (char *)addr;
+
+		if (cmdtp->usage) {
+			addr = (ulong)(cmdtp->usage) + gd->reloc_off;
+			cmdtp->usage = (char *)addr;
+		}
+#ifdef	CFG_LONGHELP
+		if (cmdtp->help) {
+			addr = (ulong)(cmdtp->help) + gd->reloc_off;
+			cmdtp->help = (char *)addr;
+		}
+#endif
+	}
+	/* there are some other pointer constants we must deal with */
+#ifndef CFG_ENV_IS_NOWHERE
+	env_name_spec += gd->reloc_off;
+#endif
+	
+	/* configure available FLASH banks */
+	size = flash_init();
+	display_flash_config (size);
+
+	bd = gd->bd;
+	bd->bi_flashstart = CFG_FLASH_BASE;
+	bd->bi_flashsize = size;
+#if CFG_MONITOR_BASE == CFG_FLASH_BASE
+	bd->bi_flashoffset = CFG_MONITOR_LEN;	/* reserved area for U-Boot */
+#else
+	bd->bi_flashoffset = 0;
+#endif
+
+	/* initialize malloc() area */
+	mem_malloc_init();
+	malloc_bin_reloc();
+
+	/* relocate environment function pointers etc. */
+	env_relocate();
+
+	/* board MAC address */
+	s = getenv ("ethaddr");
+	for (i = 0; i < 6; ++i) {
+		bd->bi_enetaddr[i] = s ? simple_strtoul (s, &e, 16) : 0;
+		if (s)
+			s = (*e) ? e + 1 : e;
+	}
+
+	/* IP Address */
+	bd->bi_ip_addr = getenv_IPaddr("ipaddr");
+
+/** leave this here (after malloc(), environment and PCI are working) **/
+	/* Initialize devices */
+	devices_init ();
+
+	/* allocate syscalls table (console_init_r will fill it in */
+	syscall_tbl = (void **) malloc (NR_SYSCALLS * sizeof (void *));
+
+	/* Initialize the console (after the relocation and devices init) */
+	console_init_r ();
+/** ** ** ** ** ** ** ** ** ** ** ** ** ** ** ** ** ** ** ** ** **/
+
+#if (CONFIG_COMMANDS & CFG_CMD_NET) && defined(CONFIG_NET_MULTI)
+	puts ("Net:   ");
+	eth_initialize(gd->bd);
+#endif
+
+	/* main_loop() can return to retry autoboot, if so just run it again. */
+	for (;;) {
+		main_loop ();
+	}
+
+	/* NOTREACHED - no way out of command loop except booting */
+}
+
+void hang (void)
+{
+	puts ("### ERROR ### Please RESET the board ###\n");
+	for (;;);
+}
+
diff --git a/lib_mips/mips_linux.c b/lib_mips/mips_linux.c
new file mode 100644
index 0000000000..e73d4d8527
--- /dev/null
+++ b/lib_mips/mips_linux.c
@@ -0,0 +1,276 @@
+/*
+ * (C) Copyright 2003
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ *
+ */
+
+#include <common.h>
+#include <command.h>
+#include <cmd_boot.h>
+#include <image.h>
+#include <zlib.h>
+#include <asm/byteorder.h>
+#include <asm/addrspace.h>
+
+#define	LINUX_MAX_ENVS		256
+#define	LINUX_MAX_ARGS		256
+
+#ifdef CONFIG_SHOW_BOOT_PROGRESS
+# include <status_led.h>
+# define SHOW_BOOT_PROGRESS(arg)	show_boot_progress(arg)
+#else
+# define SHOW_BOOT_PROGRESS(arg)
+#endif
+
+extern image_header_t header;           /* from cmd_bootm.c */
+
+static int	linux_argc;
+static char **	linux_argv;
+
+static char **	linux_env;
+static char *	linux_env_p;
+static int	linux_env_idx;
+
+static void linux_params_init (ulong start, char * commandline);
+static void linux_env_set (char * env_name, char * env_val);
+
+
+void do_bootm_linux(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[],
+		ulong addr, ulong *len_ptr, int   verify)
+{
+    DECLARE_GLOBAL_DATA_PTR;
+
+    ulong len = 0, checksum;
+    ulong initrd_start, initrd_end;
+    ulong data;
+    void (*theKernel)(int, char **, char **, int *);
+    image_header_t *hdr = &header;
+    char *commandline = getenv("bootargs");
+    char env_buf[12];
+
+    theKernel = (void (*)(int, char **, char **, int *))ntohl(hdr->ih_ep);
+
+    /*
+     * Check if there is an initrd image
+     */
+    if (argc >= 3) {
+	SHOW_BOOT_PROGRESS (9);
+
+	addr = simple_strtoul(argv[2], NULL, 16);
+
+	printf ("## Loading Ramdisk Image at %08lx ...\n", addr);
+
+	/* Copy header so we can blank CRC field for re-calculation */
+	memcpy (&header, (char *)addr, sizeof(image_header_t));
+
+	if (ntohl(hdr->ih_magic) != IH_MAGIC) {
+	    printf ("Bad Magic Number\n");
+	    SHOW_BOOT_PROGRESS (-10);
+	    do_reset (cmdtp, flag, argc, argv);
+	}
+
+	data = (ulong)&header;
+	len  = sizeof(image_header_t);
+
+	checksum = ntohl(hdr->ih_hcrc);
+	hdr->ih_hcrc = 0;
+
+	if (crc32 (0, (char *)data, len) != checksum) {
+	    printf ("Bad Header Checksum\n");
+	    SHOW_BOOT_PROGRESS (-11);
+	    do_reset (cmdtp, flag, argc, argv);
+	}
+
+	SHOW_BOOT_PROGRESS (10);
+
+	print_image_hdr (hdr);
+
+	data = addr + sizeof(image_header_t);
+	len  = ntohl(hdr->ih_size);
+
+	if (verify) {
+	    ulong csum = 0;
+
+	    printf ("   Verifying Checksum ... ");
+	    csum = crc32 (0, (char *)data, len);
+	    if (csum != ntohl(hdr->ih_dcrc)) {
+		printf ("Bad Data CRC\n");
+	        SHOW_BOOT_PROGRESS (-12);
+		do_reset (cmdtp, flag, argc, argv);
+	    }
+	    printf ("OK\n");
+	}
+
+	SHOW_BOOT_PROGRESS (11);
+
+	if ((hdr->ih_os   != IH_OS_LINUX)	||
+	    (hdr->ih_arch != IH_CPU_MIPS)	||
+	    (hdr->ih_type != IH_TYPE_RAMDISK)	) {
+	    printf ("No Linux MIPS Ramdisk Image\n");
+	    SHOW_BOOT_PROGRESS (-13);
+	    do_reset (cmdtp, flag, argc, argv);
+	}
+
+	/*
+	 * Now check if we have a multifile image
+	 */
+    } else if ((hdr->ih_type==IH_TYPE_MULTI) && (len_ptr[1])) {
+	ulong tail    = ntohl(len_ptr[0]) % 4;
+	int i;
+
+	SHOW_BOOT_PROGRESS (13);
+
+	/* skip kernel length and terminator */
+	data = (ulong)(&len_ptr[2]);
+	/* skip any additional image length fields */
+	for (i=1; len_ptr[i]; ++i)
+	  data += 4;
+	/* add kernel length, and align */
+	data += ntohl(len_ptr[0]);
+	if (tail) {
+	    data += 4 - tail;
+	}
+
+	len   = ntohl(len_ptr[1]);
+
+    } else {
+	/*
+	 * no initrd image
+	 */
+        SHOW_BOOT_PROGRESS (14);
+
+	data = 0;
+    }
+
+#ifdef	DEBUG
+    if (!data) {
+	printf ("No initrd\n");
+    }
+#endif
+
+    if (data) {
+	initrd_start = data;
+	initrd_end   = initrd_start + len;
+    } else {
+	initrd_start = 0;
+	initrd_end = 0;
+    }
+
+    SHOW_BOOT_PROGRESS (15);
+
+#ifdef DEBUG
+    printf ("## Transferring control to Linux (at address %08lx) ...\n",
+	    (ulong)theKernel);
+#endif
+
+    linux_params_init (PHYSADDR(gd->bd->bi_boot_params), commandline);
+
+    sprintf (env_buf, "%lu", gd->ram_size >> 20);
+    linux_env_set ("memsize", env_buf);
+
+    sprintf (env_buf, "0x%08X", (uint)PHYSADDR(initrd_start));
+    linux_env_set ("initrd_start", env_buf);
+
+    sprintf (env_buf, "0x%X", (uint)(initrd_end - initrd_start));
+    linux_env_set ("initrd_size", env_buf);
+
+    sprintf (env_buf, "0x%08X", (uint)(gd->bd->bi_flashstart));
+    linux_env_set ("flash_start", env_buf);
+
+    sprintf (env_buf, "0x%X", (uint)(gd->bd->bi_flashsize));
+    linux_env_set ("flash_size", env_buf);
+
+    /* we assume that the kernel is in place */
+    printf("\nStarting kernel ...\n\n");
+
+    theKernel(linux_argc, linux_argv, linux_env, 0);
+}
+
+static void linux_params_init (ulong start, char * line)
+{
+    char * next, * quote, * argp;
+
+    linux_argc = 1;
+    linux_argv = (char **) start;
+    linux_argv[0] = 0;
+    argp = (char *)(linux_argv + LINUX_MAX_ARGS);
+
+    next = line;
+
+    while (line && *line && linux_argc < LINUX_MAX_ARGS)
+    {
+	quote = strchr (line, '"');
+	next = strchr (line, ' ');
+
+        while (next != NULL && quote != NULL && quote < next)
+	{
+	    /* we found a left quote before the next blank
+             * now we have to find the matching right quote
+             */
+            next = strchr (quote + 1, '"');
+            if (next != NULL)
+	    {
+                quote = strchr (next + 1, '"');
+                next = strchr (next + 1, ' ');
+            }
+        }
+	
+	if (next == NULL)
+	{
+	    next = line + strlen (line);
+	}
+
+	linux_argv [linux_argc] = argp;
+	memcpy (argp, line, next - line);
+	argp [next - line] = 0;
+
+	argp += next - line + 1;
+	linux_argc ++;
+        
+	if (*next) next ++;
+	
+	line = next;
+    }
+
+    linux_env = (char **)(((ulong)argp + 15) & ~15);
+    linux_env [0] = 0;
+    linux_env_p = (char *)(linux_env + LINUX_MAX_ENVS);
+    linux_env_idx = 0;
+}
+
+static void linux_env_set (char * env_name, char * env_val)
+{
+    if (linux_env_idx < LINUX_MAX_ENVS - 1)
+    {
+	linux_env [linux_env_idx] = linux_env_p;
+
+	strcpy (linux_env_p, env_name);
+	linux_env_p += strlen (env_name);
+
+	strcpy (linux_env_p, "=");
+	linux_env_p += 1;
+
+	strcpy (linux_env_p, env_val);
+	linux_env_p += strlen (env_val);
+	
+	linux_env_p ++;
+	linux_env [++ linux_env_idx] = 0;
+    }
+}
diff --git a/lib_mips/time.c b/lib_mips/time.c
new file mode 100644
index 0000000000..9e6138da96
--- /dev/null
+++ b/lib_mips/time.c
@@ -0,0 +1,103 @@
+/*
+ * (C) Copyright 2003
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+
+
+static inline void mips_compare_set(u32 v)
+{
+	asm volatile ("mtc0 %0, $11" : : "r" (v));
+}
+
+static inline void mips_count_set(u32 v)
+{
+	asm volatile ("mtc0 %0, $9" : : "r" (v));
+}
+
+
+static inline u32 mips_count_get(void)
+{
+	u32 count;
+
+	asm volatile ("mfc0 %0, $9" : "=r" (count) :);
+	return count;
+}
+
+/*
+ * timer without interrupts
+ */
+
+int timer_init(void)
+{
+	mips_compare_set(0);
+	mips_count_set(0);
+
+	return 0;
+}
+
+void reset_timer(void)
+{
+	mips_count_set(0);
+}
+
+ulong get_timer(ulong base)
+{
+	return mips_count_get() - base;
+}
+
+void set_timer(ulong t)
+{
+	mips_count_set(t);
+}
+
+void udelay (unsigned long usec)
+{
+	ulong tmo;
+	ulong start = get_timer(0);
+
+	tmo = usec * CFG_HZ / 1000;
+	tmo /= 1000;
+
+	while ((ulong)((mips_count_get() - start)) < tmo)
+		/*NOP*/;
+}
+
+/*
+ * This function is derived from PowerPC code (read timebase as long long).
+ * On MIPS it just returns the timer value.
+ */
+unsigned long long get_ticks(void)
+{
+	return mips_count_get();
+}
+
+/*
+ * This function is derived from PowerPC code (timebase clock frequency).
+ * On MIPS it returns the number of timer ticks per second.
+ */
+ulong get_tbclk(void)
+{
+	return CFG_HZ;
+}
+
+