at91: nand: switch atmel_nand to generic GPIO API

Signed-off-by: Andreas Bießmann <andreas.devel@googlemail.com>
Acked-by: Jens Scharsig (BuS Elektronik)<esw@bus-elektronik.de>
Tested-by: Jens Scharsig (BuS Elektronik)<esw@bus-elektronik.de>
Acked-by: Scott Wood <scottwood@freescale.com>

18 files changed, 43 insertions, 37 deletions

diff --git a/board/BuS/vl_ma2sc/vl_ma2sc.c b/board/BuS/vl_ma2sc/vl_ma2sc.c
index 412ff3b482..63f7ad9a7a 100644
--- a/board/BuS/vl_ma2sc/vl_ma2sc.c
+++ b/board/BuS/vl_ma2sc/vl_ma2sc.c
@@ -10,6 +10,7 @@
 #include <common.h>
 #include <asm/sizes.h>
 #include <asm/io.h>
+#include <asm/gpio.h>
 #include <asm/arch/hardware.h>
 #include <asm/arch/clk.h>
 #include <asm/arch/at91_matrix.h>
@@ -65,10 +66,10 @@ static void vl_ma2sc_nand_hw_init(void)
 
 	/* Configure RDY/BSY */
 #ifdef CONFIG_SYS_NAND_READY_PIN
-	at91_set_pio_input(CONFIG_SYS_NAND_READY_PIN, 1);
+	gpio_direction_input(CONFIG_SYS_NAND_READY_PIN);
 #endif
 	/* Enable NandFlash */
-	at91_set_pio_output(CONFIG_SYS_NAND_ENABLE_PIN, 1);
+	gpio_direction_output(CONFIG_SYS_NAND_ENABLE_PIN, 1);
 }
 #endif
 
diff --git a/board/egnite/ethernut5/ethernut5.c b/board/egnite/ethernut5/ethernut5.c
index 1f5eea56ac..b45213c245 100644
--- a/board/egnite/ethernut5/ethernut5.c
+++ b/board/egnite/ethernut5/ethernut5.c
@@ -71,6 +71,7 @@
 #include <asm/arch/at91_spi.h>
 #include <asm/arch/gpio.h>
 #include <asm/io.h>
+#include <asm/gpio.h>
 
 #include "ethernut5_pwrman.h"
 
@@ -141,7 +142,7 @@ static void ethernut5_nand_hw_init(void)
 	/* Ready pin is optional. */
 	at91_set_pio_input(CONFIG_SYS_NAND_READY_PIN, 1);
 #endif
-	at91_set_pio_output(CONFIG_SYS_NAND_ENABLE_PIN, 1);
+	gpio_direction_output(CONFIG_SYS_NAND_ENABLE_PIN, 1);
 }
 #endif
 
diff --git a/board/esd/meesc/meesc.c b/board/esd/meesc/meesc.c
index 9bf6739081..c5994e0a4a 100644
--- a/board/esd/meesc/meesc.c
+++ b/board/esd/meesc/meesc.c
@@ -12,6 +12,7 @@
 
 #include <common.h>
 #include <asm/io.h>
+#include <asm/gpio.h>
 #include <asm/arch/at91sam9_smc.h>
 #include <asm/arch/at91_common.h>
 #include <asm/arch/at91_pmc.h>
@@ -74,10 +75,10 @@ static void meesc_nand_hw_init(void)
 		&smc->cs[3].mode);
 
 	/* Configure RDY/BSY */
-	at91_set_pio_input(CONFIG_SYS_NAND_READY_PIN, 1);
+	gpio_direction_input(CONFIG_SYS_NAND_READY_PIN);
 
 	/* Enable NandFlash */
-	at91_set_pio_output(CONFIG_SYS_NAND_ENABLE_PIN, 1);
+	gpio_direction_output(CONFIG_SYS_NAND_ENABLE_PIN, 1);
 }
 #endif /* CONFIG_CMD_NAND */
 
diff --git a/board/esd/otc570/otc570.c b/board/esd/otc570/otc570.c
index acc1b31b70..4751d0a9e9 100644
--- a/board/esd/otc570/otc570.c
+++ b/board/esd/otc570/otc570.c
@@ -12,6 +12,7 @@
 
 #include <common.h>
 #include <asm/io.h>
+#include <asm/gpio.h>
 #include <asm/arch/at91sam9_smc.h>
 #include <asm/arch/at91_common.h>
 #include <asm/arch/at91_pmc.h>
@@ -82,10 +83,10 @@ static void otc570_nand_hw_init(void)
 		&smc->cs[3].mode);
 
 	/* Configure RDY/BSY */
-	at91_set_pio_input(CONFIG_SYS_NAND_READY_PIN, 1);
+	gpio_direction_input(CONFIG_SYS_NAND_READY_PIN);
 
 	/* Enable NandFlash */
-	at91_set_pio_output(CONFIG_SYS_NAND_ENABLE_PIN, 1);
+	gpio_direction_output(CONFIG_SYS_NAND_ENABLE_PIN, 1);
 }
 #endif /* CONFIG_CMD_NAND */
 
diff --git a/board/eukrea/cpu9260/cpu9260.c b/board/eukrea/cpu9260/cpu9260.c
index 274f72d427..01ecccb8c9 100644
--- a/board/eukrea/cpu9260/cpu9260.c
+++ b/board/eukrea/cpu9260/cpu9260.c
@@ -12,6 +12,7 @@
 
 #include <common.h>
 #include <asm/io.h>
+#include <asm/gpio.h>
 #include <asm/arch/at91sam9260.h>
 #include <asm/arch/at91sam9_smc.h>
 #include <asm/arch/at91_common.h>
@@ -78,10 +79,10 @@ static void cpu9260_nand_hw_init(void)
 	writel(1 << ATMEL_ID_PIOC, &pmc->pcer);
 
 	/* Configure RDY/BSY */
-	at91_set_pio_input(CONFIG_SYS_NAND_READY_PIN, 1);
+	gpio_direction_input(CONFIG_SYS_NAND_READY_PIN);
 
 	/* Enable NandFlash */
-	at91_set_pio_output(CONFIG_SYS_NAND_ENABLE_PIN, 1);
+	gpio_direction_output(CONFIG_SYS_NAND_ENABLE_PIN, 1);
 }
 #endif
 
diff --git a/board/ronetix/pm9261/pm9261.c b/board/ronetix/pm9261/pm9261.c
index a2a569b0cd..a63438343e 100644
--- a/board/ronetix/pm9261/pm9261.c
+++ b/board/ronetix/pm9261/pm9261.c
@@ -11,6 +11,7 @@
 #include <common.h>
 #include <asm/sizes.h>
 #include <asm/io.h>
+#include <asm/gpio.h>
 #include <asm/arch/at91sam9_smc.h>
 #include <asm/arch/at91_common.h>
 #include <asm/arch/at91_pmc.h>
@@ -73,10 +74,10 @@ static void pm9261_nand_hw_init(void)
 		&pmc->pcer);
 
 	/* Configure RDY/BSY */
-	at91_set_pio_input(CONFIG_SYS_NAND_READY_PIN, 1);
+	gpio_direction_input(CONFIG_SYS_NAND_READY_PIN);
 
 	/* Enable NandFlash */
-	at91_set_pio_output(CONFIG_SYS_NAND_ENABLE_PIN, 1);
+	gpio_direction_output(CONFIG_SYS_NAND_ENABLE_PIN, 1);
 
 	at91_set_a_periph(AT91_PIO_PORTC, 0, 0);	/* NANDOE */
 	at91_set_a_periph(AT91_PIO_PORTC, 1, 0);	/* NANDWE */
diff --git a/board/ronetix/pm9263/pm9263.c b/board/ronetix/pm9263/pm9263.c
index 48eba99d00..3cedeef8ae 100644
--- a/board/ronetix/pm9263/pm9263.c
+++ b/board/ronetix/pm9263/pm9263.c
@@ -11,6 +11,7 @@
 #include <common.h>
 #include <asm/sizes.h>
 #include <asm/io.h>
+#include <asm/gpio.h>
 #include <asm/arch/at91sam9_smc.h>
 #include <asm/arch/at91_common.h>
 #include <asm/arch/at91_pmc.h>
@@ -67,10 +68,10 @@ static void pm9263_nand_hw_init(void)
 		&smc->cs[3].mode);
 
 	/* Configure RDY/BSY */
-	at91_set_pio_input(CONFIG_SYS_NAND_READY_PIN, 1);
+	gpio_direction_input(CONFIG_SYS_NAND_READY_PIN);
 
 	/* Enable NandFlash */
-	at91_set_pio_output(CONFIG_SYS_NAND_ENABLE_PIN, 1);
+	gpio_direction_output(CONFIG_SYS_NAND_ENABLE_PIN, 1);
 }
 #endif
 
diff --git a/board/ronetix/pm9g45/pm9g45.c b/board/ronetix/pm9g45/pm9g45.c
index 5bb5a3c102..c9f2747007 100644
--- a/board/ronetix/pm9g45/pm9g45.c
+++ b/board/ronetix/pm9g45/pm9g45.c
@@ -14,6 +14,7 @@
 #include <common.h>
 #include <asm/sizes.h>
 #include <asm/io.h>
+#include <asm/gpio.h>
 #include <asm/arch/at91sam9_smc.h>
 #include <asm/arch/at91_common.h>
 #include <asm/arch/at91_pmc.h>
@@ -66,11 +67,11 @@ static void pm9g45_nand_hw_init(void)
 
 #ifdef CONFIG_SYS_NAND_READY_PIN
 	/* Configure RDY/BSY */
-	at91_set_pio_input(CONFIG_SYS_NAND_READY_PIN, 1);
+	gpio_direction_input(CONFIG_SYS_NAND_READY_PIN);
 #endif
 
 	/* Enable NandFlash */
-	at91_set_pio_output(CONFIG_SYS_NAND_ENABLE_PIN, 1);
+	gpio_direction_output(CONFIG_SYS_NAND_ENABLE_PIN, 1);
 }
 #endif
 
diff --git a/drivers/mtd/nand/atmel_nand.c b/drivers/mtd/nand/atmel_nand.c
index da83f06e47..99fc86c8db 100644
--- a/drivers/mtd/nand/atmel_nand.c
+++ b/drivers/mtd/nand/atmel_nand.c
@@ -12,9 +12,8 @@
  */
 
 #include <common.h>
-#include <asm/arch/hardware.h>
+#include <asm/gpio.h>
 #include <asm/arch/gpio.h>
-#include <asm/arch/at91_pio.h>
 
 #include <malloc.h>
 #include <nand.h>
@@ -1146,8 +1145,7 @@ static void at91_nand_hwcontrol(struct mtd_info *mtd,
 			IO_ADDR_W |= CONFIG_SYS_NAND_MASK_ALE;
 
 #ifdef CONFIG_SYS_NAND_ENABLE_PIN
-		at91_set_gpio_value(CONFIG_SYS_NAND_ENABLE_PIN,
-				    !(ctrl & NAND_NCE));
+		gpio_set_value(CONFIG_SYS_NAND_ENABLE_PIN, !(ctrl & NAND_NCE));
 #endif
 		this->IO_ADDR_W = (void *) IO_ADDR_W;
 	}
@@ -1159,7 +1157,7 @@ static void at91_nand_hwcontrol(struct mtd_info *mtd,
 #ifdef CONFIG_SYS_NAND_READY_PIN
 static int at91_nand_ready(struct mtd_info *mtd)
 {
-	return at91_get_gpio_value(CONFIG_SYS_NAND_READY_PIN);
+	return gpio_get_value(CONFIG_SYS_NAND_READY_PIN);
 }
 #endif
 
diff --git a/include/configs/at91sam9n12ek.h b/include/configs/at91sam9n12ek.h
index 4ec1799ebc..e23549d444 100644
--- a/include/configs/at91sam9n12ek.h
+++ b/include/configs/at91sam9n12ek.h
@@ -113,8 +113,8 @@
 #define CONFIG_SYS_NAND_BASE		0x40000000
 #define CONFIG_SYS_NAND_MASK_ALE	(1 << 21)
 #define CONFIG_SYS_NAND_MASK_CLE	(1 << 22)
-#define CONFIG_SYS_NAND_ENABLE_PIN	AT91_PIO_PORTD, 4
-#define CONFIG_SYS_NAND_READY_PIN	AT91_PIO_PORTD, 5
+#define CONFIG_SYS_NAND_ENABLE_PIN	GPIO_PIN_PD(4)
+#define CONFIG_SYS_NAND_READY_PIN	GPIO_PIN_PD(5)
 
 /* PMECC & PMERRLOC */
 #define CONFIG_ATMEL_NAND_HWECC
diff --git a/include/configs/cpu9260.h b/include/configs/cpu9260.h
index 22c0a0915c..39f7062388 100644
--- a/include/configs/cpu9260.h
+++ b/include/configs/cpu9260.h
@@ -280,8 +280,8 @@
 #define CONFIG_SYS_MAX_NAND_DEVICE		1
 #define CONFIG_SYS_NAND_BASE			0x40000000
 #define CONFIG_SYS_NAND_DBW_8			1
-#define CONFIG_SYS_NAND_READY_PIN		AT91_PIO_PORTC, 13
-#define CONFIG_SYS_NAND_ENABLE_PIN		AT91_PIO_PORTC, 14
+#define CONFIG_SYS_NAND_READY_PIN		GPIO_PIN_PC(13)
+#define CONFIG_SYS_NAND_ENABLE_PIN		GPIO_PIN_PC(14)
 #define CONFIG_SYS_NAND_MASK_ALE		(1 << 21)
 #define CONFIG_SYS_NAND_MASK_CLE		(1 << 22)
 
diff --git a/include/configs/ethernut5.h b/include/configs/ethernut5.h
index 252df54e98..480d8678c6 100644
--- a/include/configs/ethernut5.h
+++ b/include/configs/ethernut5.h
@@ -149,7 +149,7 @@
 #define CONFIG_SYS_NAND_MASK_ALE	(1 << 21)
 /* our CLE is AD22 */
 #define CONFIG_SYS_NAND_MASK_CLE	(1 << 22)
-#define CONFIG_SYS_NAND_ENABLE_PIN	AT91_PIO_PORTC, 14
+#define CONFIG_SYS_NAND_ENABLE_PIN	GPIO_PIN_PC(14)
 #endif
 
 /* JFFS2 */
diff --git a/include/configs/meesc.h b/include/configs/meesc.h
index 91f6e2f8d3..86ce5f2397 100644
--- a/include/configs/meesc.h
+++ b/include/configs/meesc.h
@@ -143,8 +143,8 @@
 # define CONFIG_SYS_NAND_DBW_8
 # define CONFIG_SYS_NAND_MASK_ALE		(1 << 21)
 # define CONFIG_SYS_NAND_MASK_CLE		(1 << 22)
-# define CONFIG_SYS_NAND_ENABLE_PIN		AT91_PIO_PORTD, 15
-# define CONFIG_SYS_NAND_READY_PIN		AT91_PIO_PORTA, 22
+# define CONFIG_SYS_NAND_ENABLE_PIN		GPIO_PIN_PD(15)
+# define CONFIG_SYS_NAND_READY_PIN		GPIO_PIN_PA(22)
 #endif
 
 /* Ethernet */
diff --git a/include/configs/otc570.h b/include/configs/otc570.h
index 3f4e0734ab..629967d054 100644
--- a/include/configs/otc570.h
+++ b/include/configs/otc570.h
@@ -193,8 +193,8 @@
 # define CONFIG_SYS_NAND_DBW_8
 # define CONFIG_SYS_NAND_MASK_ALE		(1 << 21)
 # define CONFIG_SYS_NAND_MASK_CLE		(1 << 22)
-# define CONFIG_SYS_NAND_ENABLE_PIN		AT91_PIO_PORTD, 15
-# define CONFIG_SYS_NAND_READY_PIN		AT91_PIO_PORTA, 22
+# define CONFIG_SYS_NAND_ENABLE_PIN		GPIO_PIN_PD(15)
+# define CONFIG_SYS_NAND_READY_PIN		GPIO_PIN_PA(22)
 #endif
 
 /* Ethernet */
diff --git a/include/configs/pm9261.h b/include/configs/pm9261.h
index acf6d610e7..f977e25b87 100644
--- a/include/configs/pm9261.h
+++ b/include/configs/pm9261.h
@@ -219,8 +219,8 @@
 #define CONFIG_SYS_NAND_MASK_ALE		(1 << 22)
 /* our CLE is AD21 */
 #define CONFIG_SYS_NAND_MASK_CLE		(1 << 21)
-#define CONFIG_SYS_NAND_ENABLE_PIN		AT91_PIO_PORTC, 14
-#define CONFIG_SYS_NAND_READY_PIN		AT91_PIO_PORTA, 16
+#define CONFIG_SYS_NAND_ENABLE_PIN		GPIO_PIN_PC(14)
+#define CONFIG_SYS_NAND_READY_PIN		GPIO_PIN_PA(16)
 
 /* NOR flash */
 #define CONFIG_SYS_FLASH_CFI			1
diff --git a/include/configs/pm9263.h b/include/configs/pm9263.h
index 533e249a7c..dffc3365c6 100644
--- a/include/configs/pm9263.h
+++ b/include/configs/pm9263.h
@@ -241,8 +241,8 @@
 #define CONFIG_SYS_NAND_MASK_ALE	(1 << 21)
 /* our CLE is AD22 */
 #define CONFIG_SYS_NAND_MASK_CLE	(1 << 22)
-#define CONFIG_SYS_NAND_ENABLE_PIN	AT91_PIO_PORTD, 15
-#define CONFIG_SYS_NAND_READY_PIN	AT91_PIO_PORTB, 30
+#define CONFIG_SYS_NAND_ENABLE_PIN	GPIO_PIN_PD(15)
+#define CONFIG_SYS_NAND_READY_PIN	GPIO_PIN_PB(30)
 
 #endif
 
diff --git a/include/configs/pm9g45.h b/include/configs/pm9g45.h
index e0c388e70c..03a25c8230 100644
--- a/include/configs/pm9g45.h
+++ b/include/configs/pm9g45.h
@@ -106,8 +106,8 @@
 #define CONFIG_SYS_NAND_MASK_ALE	(1 << 21)
 /* our CLE is AD22 */
 #define CONFIG_SYS_NAND_MASK_CLE	(1 << 22)
-#define CONFIG_SYS_NAND_ENABLE_PIN	AT91_PIO_PORTC, 14
-#define CONFIG_SYS_NAND_READY_PIN	AT91_PIO_PORTD, 3
+#define CONFIG_SYS_NAND_ENABLE_PIN	GPIO_PIN_PC(14)
+#define CONFIG_SYS_NAND_READY_PIN	GPIO_PIN_PD(3)
 
 #endif
 
diff --git a/include/configs/vl_ma2sc.h b/include/configs/vl_ma2sc.h
index aacb84c8b5..88aaa95fb1 100644
--- a/include/configs/vl_ma2sc.h
+++ b/include/configs/vl_ma2sc.h
@@ -320,8 +320,8 @@
 #define CONFIG_SYS_NAND_DBW_8		1
 #define CONFIG_SYS_NAND_MASK_ALE	(1 << 21)	/* our ALE is AD21 */
 #define CONFIG_SYS_NAND_MASK_CLE	(1 << 22)	/* our CLE is AD22 */
-#define CONFIG_SYS_NAND_ENABLE_PIN	AT91_PIO_PORTD, 15
-#define CONFIG_SYS_NAND_READY_PIN	AT91_PIO_PORTB, 0
+#define CONFIG_SYS_NAND_ENABLE_PIN	GPIO_PIN_PD(15)
+#define CONFIG_SYS_NAND_READY_PIN	GPIO_PIN_PB(0)
 #define CONFIG_SYS_64BIT_VSPRINTF	/* needed for nand_util.c */
 #endif