fix comments with new drivers organization

Signed-off-by: Marcel Ziswiler <marcel@ziswiler.com>

24 files changed, 31 insertions, 30 deletions

diff --git a/README b/README
index 9a8b3b903d..57fc01a909 100644
--- a/README
+++ b/README
@@ -924,7 +924,7 @@ The following options need to be configured:
 		(i.e. setenv videomode 317; saveenv; reset;)
 
 		- "videomode=bootargs" all the video parameters are parsed
-		from the bootargs. (See drivers/videomodes.c)
+		from the bootargs. (See drivers/video/videomodes.c)
 
 
 		CONFIG_VIDEO_SED13806
@@ -1353,7 +1353,7 @@ The following options need to be configured:
 		CONFIG_FSL_I2C
 
 		Define this option if you want to use Freescale's I2C driver in
-		drivers/fsl_i2c.c.
+		drivers/i2c/fsl_i2c.c.
 
 
 - SPI Support:	CONFIG_SPI
diff --git a/board/sc3/sc3.c b/board/sc3/sc3.c
index 363a77d8a4..09407647ab 100644
--- a/board/sc3/sc3.c
+++ b/board/sc3/sc3.c
@@ -757,7 +757,7 @@ static struct pci_config_table pci_solidcard3_config_table[] =
 };
 
 /*-------------------------------------------------------------------------+
- | pci_init_board (Called from pci_init() in drivers/pci.c)
+ | pci_init_board (Called from pci_init() in drivers/pci/pci.c)
  |
  | Init the PCI part of the SolidCard III
  |
diff --git a/board/ssv/common/cmd_sled.c b/board/ssv/common/cmd_sled.c
index 713ed65568..2208580fae 100644
--- a/board/ssv/common/cmd_sled.c
+++ b/board/ssv/common/cmd_sled.c
@@ -32,8 +32,8 @@
  * !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
  * !!!!!						 !!!!!
  * !!!!! Next type definition was coming from original	 !!!!!
- * !!!!! status LED driver drivers/status_led.c and	 !!!!!
- * !!!!! should exported for using here.		 !!!!!
+ * !!!!! status LED driver drivers/misc/status_led.c	 !!!!!
+ * !!!!! and should be exported for using it here.	 !!!!!
  * !!!!!						 !!!!!
  * !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! */
 
diff --git a/common/env_nand.c b/common/env_nand.c
index 38a07f8993..ce0a2514db 100644
--- a/common/env_nand.c
+++ b/common/env_nand.c
@@ -57,7 +57,7 @@ int nand_legacy_rw (struct nand_chip* nand, int cmd,
 	    size_t start, size_t len,
 	    size_t * retlen, u_char * buf);
 
-/* info for NAND chips, defined in drivers/nand/nand.c */
+/* info for NAND chips, defined in drivers/mtd/nand/nand.c */
 extern nand_info_t nand_info[];
 
 /* references to names in env_common.c */
diff --git a/cpu/ppc4xx/4xx_pci.c b/cpu/ppc4xx/4xx_pci.c
index a68c419b1b..a5b9690bec 100644
--- a/cpu/ppc4xx/4xx_pci.c
+++ b/cpu/ppc4xx/4xx_pci.c
@@ -339,7 +339,7 @@ void pci_405gp_init(struct pci_controller *hose)
 }
 
 /*
- * drivers/pci.c skips every host bridge but the 405GP since it could
+ * drivers/pci/pci.c skips every host bridge but the 405GP since it could
  * be set as an Adapter.
  *
  * I (Andrew May) don't know what we should do here, but I don't want
diff --git a/doc/README.generic_usb_ohci b/doc/README.generic_usb_ohci
index 494dd1f5d9..c44c501474 100644
--- a/doc/README.generic_usb_ohci
+++ b/doc/README.generic_usb_ohci
@@ -1,7 +1,7 @@
 Notes on the the generic USB-OHCI driver
 ========================================
 
-This driver (drivers/usb_ohci.[ch]) is the result of the merge of
+This driver (drivers/usb/usb_ohci.[ch]) is the result of the merge of
 various existing OHCI drivers that were basically identical beside
 cpu/board dependant initalization. This initalization has been moved
 into cpu/board directories and are called via the hooks below.
diff --git a/doc/README.modnet50 b/doc/README.modnet50
index 30338ce8cc..f7bb254e16 100644
--- a/doc/README.modnet50
+++ b/doc/README.modnet50
@@ -51,8 +51,8 @@ board/modnet50/lowlevel_init.S   .. memory setup for ModNET50
 board/modnet50/flash.c	    .. flash routines
 board/modnet50/modnet50.c   .. some board init stuff
 
-drivers/netarm_eth.c	    .. ethernet driver for the NET+50 CPU
-drivers/netarm_eth.h	    .. header for ethernet driver
+drivers/net/netarm_eth.c    .. ethernet driver for the NET+50 CPU
+drivers/net/netarm_eth.h    .. header for ethernet driver
 
 include/configs/modnet50.h  .. configuration file for ModNET50
 
diff --git a/drivers/mtd/nand/nand_util.c b/drivers/mtd/nand/nand_util.c
index 4fd4e166e6..6c5624a49a 100644
--- a/drivers/mtd/nand/nand_util.c
+++ b/drivers/mtd/nand/nand_util.c
@@ -1,5 +1,5 @@
 /*
- * drivers/nand/nand_util.c
+ * drivers/mtd/nand/nand_util.c
  *
  * Copyright (C) 2006 by Weiss-Electronic GmbH.
  * All rights reserved.
diff --git a/drivers/net/sk98lin/Makefile b/drivers/net/sk98lin/Makefile
index a7d4a3b7a7..8b83faeb15 100644
--- a/drivers/net/sk98lin/Makefile
+++ b/drivers/net/sk98lin/Makefile
@@ -20,7 +20,7 @@
 # Foundation, Inc., 59 Temple Place, Suite 330, Boston,
 # MA 02111-1307 USA
 #
-# File: drivers/sk98lin/Makefile
+# File: drivers/net/sk98lin/Makefile
 #
 # Makefile for the SysKonnect SK-98xx device driver.
 #
diff --git a/drivers/usb/isp116x-hcd.c b/drivers/usb/isp116x-hcd.c
index b21af10d0b..ac6703056c 100644
--- a/drivers/usb/isp116x-hcd.c
+++ b/drivers/usb/isp116x-hcd.c
@@ -20,7 +20,7 @@
  * MA 02111-1307 USA
  *
  *
- * Derived in part from the SL811 HCD driver "u-boot/drivers/sl811_usb.c"
+ * Derived in part from the SL811 HCD driver "u-boot/drivers/usb/sl811_usb.c"
  * (original copyright message follows):
  *
  *    (C) Copyright 2004
diff --git a/drivers/usb/usbdcore_mpc8xx.c b/drivers/usb/usbdcore_mpc8xx.c
index d4c4096565..122793c023 100644
--- a/drivers/usb/usbdcore_mpc8xx.c
+++ b/drivers/usb/usbdcore_mpc8xx.c
@@ -3,7 +3,8 @@
  * bodonoghue@CodeHermit.ie
  *
  * References
- * DasUBoot/drivers/usbdcore_omap1510.c, for design and implementation ideas.
+ * DasUBoot/drivers/usb/usbdcore_omap1510.c, for design and implementation
+ * ideas.
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
diff --git a/drivers/video/cfb_console.c b/drivers/video/cfb_console.c
index bcf877194e..82cc0c76c3 100644
--- a/drivers/video/cfb_console.c
+++ b/drivers/video/cfb_console.c
@@ -187,9 +187,9 @@ CONFIG_VIDEO_HW_CURSOR:	     - Uses the hardware cursor capability of the
 
 /*****************************************************************************/
 /* Cursor definition:							     */
-/* CONFIG_CONSOLE_CURSOR:  Uses a timer function (see drivers/i8042.c) to    */
-/*			   let the cursor blink. Uses the macros CURSOR_OFF  */
-/*			   and CURSOR_ON.				     */
+/* CONFIG_CONSOLE_CURSOR:  Uses a timer function (see drivers/input/i8042.c) */
+/*                         to let the cursor blink. Uses the macros	     */
+/*                         CURSOR_OFF and CURSOR_ON.			     */
 /* CONFIG_VIDEO_SW_CURSOR: Draws a cursor after the last character. No	     */
 /*			   blinking is provided. Uses the macros CURSOR_SET  */
 /*			   and CURSOR_OFF.				     */
@@ -217,7 +217,7 @@ void	console_cursor (int state);
 #define CURSOR_OFF console_cursor(0);
 #define CURSOR_SET
 #ifndef CONFIG_I8042_KBD
-#warning Cursor drawing on/off needs timer function s.a. drivers/i8042.c
+#warning Cursor drawing on/off needs timer function s.a. drivers/input/i8042.c
 #endif
 #else
 #ifdef	CONFIG_CONSOLE_TIME
diff --git a/fs/jffs2/jffs2_1pass.c b/fs/jffs2/jffs2_1pass.c
index 53166683fd..69f53eabcf 100644
--- a/fs/jffs2/jffs2_1pass.c
+++ b/fs/jffs2/jffs2_1pass.c
@@ -165,7 +165,7 @@ static struct part_info *current_part;
 int read_jffs2_nand(size_t start, size_t len,
 		size_t * retlen, u_char * buf, int nanddev);
 #else
-/* info for NAND chips, defined in drivers/nand/nand.c */
+/* info for NAND chips, defined in drivers/mtd/nand/nand.c */
 extern nand_info_t nand_info[];
 #endif
 
diff --git a/include/configs/CATcenter.h b/include/configs/CATcenter.h
index 0321650f3d..1603c9c0bd 100644
--- a/include/configs/CATcenter.h
+++ b/include/configs/CATcenter.h
@@ -473,7 +473,7 @@
 #define CONFIG_VGA_AS_SINGLE_DEVICE
 /* This is the base address (on 405EP-side) used to generate I/O accesses on PCI bus */
 #define CFG_ISA_IO 0xE8000000
-/* see also drivers/videomodes.c */
+/* see also drivers/video/videomodes.c */
 #define CFG_DEFAULT_VIDEO_MODE 0x303
 #endif
 
diff --git a/include/configs/MPC8313ERDB.h b/include/configs/MPC8313ERDB.h
index c9a9c83f22..7bc4e27436 100644
--- a/include/configs/MPC8313ERDB.h
+++ b/include/configs/MPC8313ERDB.h
@@ -192,7 +192,7 @@
 
 #define CFG_LBC_MRTPR	0x20000000  /*TODO */ 	/* LB refresh timer prescal, 266MHz/32 */
 
-/* drivers/nand/nand.c */
+/* drivers/mtd/nand/nand.c */
 #define CFG_NAND_BASE		0xE2800000	/* 0xF0000000 */
 #define CFG_MAX_NAND_DEVICE	1
 #define NAND_MAX_CHIPS		1
diff --git a/include/configs/PPChameleonEVB.h b/include/configs/PPChameleonEVB.h
index c2aa2cc098..cf98324344 100644
--- a/include/configs/PPChameleonEVB.h
+++ b/include/configs/PPChameleonEVB.h
@@ -496,7 +496,7 @@
 #define CONFIG_VGA_AS_SINGLE_DEVICE
 /* This is the base address (on 405EP-side) used to generate I/O accesses on PCI bus */
 #define CFG_ISA_IO 0xE8000000
-/* see also drivers/videomodes.c */
+/* see also drivers/video/videomodes.c */
 #define CFG_DEFAULT_VIDEO_MODE 0x303
 #endif
 
diff --git a/include/configs/SX1.h b/include/configs/SX1.h
index 05cef873e5..50ad7dd598 100644
--- a/include/configs/SX1.h
+++ b/include/configs/SX1.h
@@ -181,7 +181,7 @@
  * FLASH driver setup
  */
 #define CFG_FLASH_CFI		1	/* Flash memory is CFI compliant */
-#define CFG_FLASH_CFI_DRIVER	1	/* Use drivers/cfi_flash.c */
+#define CFG_FLASH_CFI_DRIVER	1	/* Use drivers/mtd/cfi_flash.c */
 #define CFG_FLASH_USE_BUFFER_WRITE 1	/* Use buffered writes (~10x faster) */
 #define CFG_FLASH_PROTECTION	1	/* Use hardware sector protection */
 
diff --git a/include/configs/integratorcp.h b/include/configs/integratorcp.h
index 69310d4dfb..e1d1483b71 100644
--- a/include/configs/integratorcp.h
+++ b/include/configs/integratorcp.h
@@ -168,7 +168,7 @@ SIB at Block62 End Block62 address 0x24f80000
 /*
  * Move up the U-Boot & monitor area if more flash is fitted.
  * If this U-Boot is to be run on Integrators with varying flash sizes,
- * drivers/cfi_flash.c::flash_init() can read the Integrator CP_FLASHPROG
+ * drivers/mtd/cfi_flash.c::flash_init() can read the Integrator CP_FLASHPROG
  * register and dynamically assign CFG_ENV_ADDR & CFG_MONITOR_BASE
  * - CFG_MONITOR_BASE is set to indicate that the environment is not
  * embedded in the boot monitor(s) area
diff --git a/include/configs/omap1510inn.h b/include/configs/omap1510inn.h
index 8623ed3cc8..0be46eacec 100644
--- a/include/configs/omap1510inn.h
+++ b/include/configs/omap1510inn.h
@@ -179,7 +179,7 @@
  * FLASH driver setup
  */
 #define CFG_FLASH_CFI		1	/* Flash memory is CFI compliant */
-#define CFG_FLASH_CFI_DRIVER	1	/* Use drivers/cfi_flash.c */
+#define CFG_FLASH_CFI_DRIVER	1	/* Use drivers/mtd/cfi_flash.c */
 #define CFG_FLASH_USE_BUFFER_WRITE	1	/* Use buffered writes (~10x faster) */
 #define CFG_FLASH_PROTECTION	1	/* Use hardware sector protection */
 
diff --git a/include/configs/omap2420h4.h b/include/configs/omap2420h4.h
index 8ae8efeb81..88a3f6eb95 100644
--- a/include/configs/omap2420h4.h
+++ b/include/configs/omap2420h4.h
@@ -283,7 +283,7 @@
  * CFI FLASH driver setup
  */
 #define CFG_FLASH_CFI		1	/* Flash memory is CFI compliant */
-#define CFG_FLASH_CFI_DRIVER	1	/* Use drivers/cfi_flash.c */
+#define CFG_FLASH_CFI_DRIVER	1	/* Use drivers/mtd/cfi_flash.c */
 #define CFG_FLASH_USE_BUFFER_WRITE 1	/* Use buffered writes (~10x faster) */
 #define CFG_FLASH_PROTECTION	1	/* Use hardware sector protection */
 
diff --git a/include/configs/omap5912osk.h b/include/configs/omap5912osk.h
index 16ce2f61ae..e3bde4ff81 100644
--- a/include/configs/omap5912osk.h
+++ b/include/configs/omap5912osk.h
@@ -174,7 +174,7 @@
  * FLASH driver setup
  */
 #define CFG_FLASH_CFI          1       /* Flash memory is CFI compliant */
-#define CFG_FLASH_CFI_DRIVER   1       /* Use drivers/cfi_flash.c */
+#define CFG_FLASH_CFI_DRIVER   1       /* Use drivers/mtd/cfi_flash.c */
 
 #define CFG_FLASH_BANKS_LIST { PHYS_FLASH_1, PHYS_FLASH_2 }
 
diff --git a/nand_spl/board/amcc/acadia/Makefile b/nand_spl/board/amcc/acadia/Makefile
index 6e53bea017..4272108b51 100644
--- a/nand_spl/board/amcc/acadia/Makefile
+++ b/nand_spl/board/amcc/acadia/Makefile
@@ -97,7 +97,7 @@ $(obj)nand_boot.c:
 	@rm -f $(obj)nand_boot.c
 	ln -s $(SRCTREE)/nand_spl/nand_boot.c $(obj)nand_boot.c
 
-# from drivers/nand directory
+# from drivers/mtd/nand directory
 $(obj)nand_ecc.c:
 	@rm -f $(obj)nand_ecc.c
 	ln -s $(SRCTREE)/drivers/mtd/nand/nand_ecc.c $(obj)nand_ecc.c
diff --git a/nand_spl/board/amcc/bamboo/Makefile b/nand_spl/board/amcc/bamboo/Makefile
index 3a633fb887..aed7960709 100644
--- a/nand_spl/board/amcc/bamboo/Makefile
+++ b/nand_spl/board/amcc/bamboo/Makefile
@@ -79,7 +79,7 @@ $(obj)nand_boot.c:
 	@rm -f $(obj)nand_boot.c
 	ln -s $(SRCTREE)/nand_spl/nand_boot.c $(obj)nand_boot.c
 
-# from drivers/nand directory
+# from drivers/mtd/nand directory
 $(obj)nand_ecc.c:
 	@rm -f $(obj)nand_ecc.c
 	ln -s $(SRCTREE)/drivers/mtd/nand/nand_ecc.c $(obj)nand_ecc.c
diff --git a/nand_spl/board/amcc/sequoia/Makefile b/nand_spl/board/amcc/sequoia/Makefile
index dfa0ce39e8..93150aad1b 100644
--- a/nand_spl/board/amcc/sequoia/Makefile
+++ b/nand_spl/board/amcc/sequoia/Makefile
@@ -89,7 +89,7 @@ $(obj)nand_boot.c:
 	@rm -f $(obj)nand_boot.c
 	ln -s $(SRCTREE)/nand_spl/nand_boot.c $(obj)nand_boot.c
 
-# from drivers/nand directory
+# from drivers/mtd/nand directory
 $(obj)nand_ecc.c:
 	@rm -f $(obj)nand_ecc.c
 	ln -s $(SRCTREE)/drivers/mtd/nand/nand_ecc.c $(obj)nand_ecc.c