summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
authorTroy Kisky <troy.kisky@boundarydevices.com>2013-01-18 16:14:24 +0000
committerStefano Babic <sbabic@denx.de>2013-01-22 10:20:13 +0100
commit71a988aa630f013b8425789351971dc4e202593d (patch)
tree88f007e7daecf39e11381e326faaddad50ca4b2d
parent00239977097001c1c1331a50a03708faba46e8f4 (diff)
downloadtalos-obmc-uboot-71a988aa630f013b8425789351971dc4e202593d.tar.gz
talos-obmc-uboot-71a988aa630f013b8425789351971dc4e202593d.zip
imximage.cfg: run files through C preprocessor
The '#' used as comments in the files cause the preprocessor trouble, so change to /* */. The mkimage command which uses this preprocessor output was moved to arch/arm/imx-common/Makefile .gitignore was updated to ignore .cfgtmp files. Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com>
-rw-r--r--.gitignore1
-rw-r--r--Makefile8
-rw-r--r--arch/arm/cpu/arm926ejs/config.mk2
-rw-r--r--arch/arm/cpu/armv7/config.mk2
-rw-r--r--arch/arm/imx-common/Makefile13
-rw-r--r--board/esg/ima3-mx53/imximage.cfg120
-rw-r--r--board/freescale/imx/ddr/mx6q_4x_mt41j128.cfg90
-rw-r--r--board/freescale/mx25pdk/imximage.cfg77
-rw-r--r--board/freescale/mx51evk/imximage.cfg114
-rw-r--r--board/freescale/mx53ard/imximage_dd3.cfg83
-rw-r--r--board/freescale/mx53evk/imximage.cfg86
-rw-r--r--board/freescale/mx53loco/imximage.cfg83
-rw-r--r--board/freescale/mx53smd/imximage.cfg83
-rw-r--r--board/freescale/mx6qarm2/imximage.cfg88
-rw-r--r--board/freescale/mx6qsabreauto/imximage.cfg82
-rw-r--r--board/genesi/mx51_efikamx/imximage_mx.cfg132
-rw-r--r--board/genesi/mx51_efikamx/imximage_sb.cfg126
-rw-r--r--board/ttcontrol/vision2/imximage_hynix.cfg295
-rw-r--r--board/woodburn/imximage.cfg2
-rw-r--r--spl/Makefile7
20 files changed, 791 insertions, 703 deletions
diff --git a/.gitignore b/.gitignore
index a163728832..e40eb7b669 100644
--- a/.gitignore
+++ b/.gitignore
@@ -15,6 +15,7 @@
*.swp
*.patch
*.bin
+*.cfgtmp
# Build tree
/build-*
diff --git a/Makefile b/Makefile
index 655ec39dbd..f4a9b336bd 100644
--- a/Makefile
+++ b/Makefile
@@ -467,9 +467,8 @@ $(obj)u-boot.img: $(obj)u-boot.bin
sed -e 's/"[ ]*$$/ for $(BOARD) board"/') \
-d $< $@
-$(obj)u-boot.imx: $(obj)u-boot.bin
- $(obj)tools/mkimage -n $(CONFIG_IMX_CONFIG) -T imximage \
- -e $(CONFIG_SYS_TEXT_BASE) -d $< $@
+$(OBJTREE)/u-boot.imx : $(obj)u-boot.bin $(SUBDIR_TOOLS) depend
+ $(MAKE) -C $(SRCTREE)/arch/arm/imx-common $@
$(obj)u-boot.kwb: $(obj)u-boot.bin
$(obj)tools/mkimage -n $(CONFIG_SYS_KWD_CONFIG) -T kwbimage \
@@ -844,7 +843,8 @@ clean:
@$(MAKE) -s -C doc/DocBook/ cleandocs
@find $(OBJTREE) -type f \
\( -name 'core' -o -name '*.bak' -o -name '*~' -o -name '*.su' \
- -o -name '*.o' -o -name '*.a' -o -name '*.exe' \) -print \
+ -o -name '*.o' -o -name '*.a' -o -name '*.exe' \
+ -o -name '*.cfgtmp' \) -print \
| xargs rm -f
# Removes everything not needed for testing u-boot
diff --git a/arch/arm/cpu/arm926ejs/config.mk b/arch/arm/cpu/arm926ejs/config.mk
index 6a3a1bb354..47f24f580e 100644
--- a/arch/arm/cpu/arm926ejs/config.mk
+++ b/arch/arm/cpu/arm926ejs/config.mk
@@ -34,6 +34,6 @@ PLATFORM_RELFLAGS += $(PF_RELFLAGS_SLB_AT)
ifneq ($(CONFIG_IMX_CONFIG),)
-ALL-y += $(obj)u-boot.imx
+ALL-y += $(OBJTREE)/u-boot.imx
endif
diff --git a/arch/arm/cpu/armv7/config.mk b/arch/arm/cpu/armv7/config.mk
index 9c3e2f3ce4..350e946392 100644
--- a/arch/arm/cpu/armv7/config.mk
+++ b/arch/arm/cpu/armv7/config.mk
@@ -40,5 +40,5 @@ PF_NO_UNALIGNED := $(call cc-option, -mno-unaligned-access,)
PLATFORM_NO_UNALIGNED := $(PF_NO_UNALIGNED)
ifneq ($(CONFIG_IMX_CONFIG),)
-ALL-y += $(obj)u-boot.imx
+ALL-y += $(OBJTREE)/u-boot.imx
endif
diff --git a/arch/arm/imx-common/Makefile b/arch/arm/imx-common/Makefile
index b3e608e9db..6309fcdfe6 100644
--- a/arch/arm/imx-common/Makefile
+++ b/arch/arm/imx-common/Makefile
@@ -42,6 +42,19 @@ all: $(obj).depend $(LIB)
$(LIB): $(OBJS)
$(call cmd_link_o_target, $(OBJS))
+$(OBJTREE)/$(patsubst "%",%,$(CONFIG_IMX_CONFIG)).cfgtmp: $(OBJTREE)/%.cfgtmp : $(SRCTREE)/%
+ mkdir -p $(dir $@)
+ $(CC) -E -x c $< $(CPPFLAGS) -o $@
+
+$(OBJTREE)/u-boot.imx: $(OBJTREE)/u-boot.bin $(OBJTREE)/$(patsubst "%",%,$(CONFIG_IMX_CONFIG)).cfgtmp
+ $(OBJTREE)/tools/mkimage -n $(filter-out %.bin,$^) -T imximage \
+ -e $(CONFIG_SYS_TEXT_BASE) -d $< $@
+
+$(OBJTREE)/SPL: $(OBJTREE)/spl/u-boot-spl.bin $(OBJTREE)/$(patsubst "%",%,$(CONFIG_IMX_CONFIG)).cfgtmp
+ $(OBJTREE)/tools/mkimage -n $(filter-out %.bin,$^) -T imximage \
+ -e $(CONFIG_SPL_TEXT_BASE) -d $< $@
+
+
#########################################################################
# defines $(obj).depend target
diff --git a/board/esg/ima3-mx53/imximage.cfg b/board/esg/ima3-mx53/imximage.cfg
index fa6b42ddcc..fce7492f6e 100644
--- a/board/esg/ima3-mx53/imximage.cfg
+++ b/board/esg/ima3-mx53/imximage.cfg
@@ -1,50 +1,52 @@
-#
-# (C) Copyright 2012
-# Stefano Babic DENX Software Engineering sbabic@denx.de.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not write to the Free Software
-# Foundation Inc. 51 Franklin Street Fifth Floor Boston,
-# MA 02110-1301 USA
-#
-# Refer docs/README.imxmage for more details about how-to configure
-# and create imximage boot image
-#
-# The syntax is taken as close as possible with the kwbimage
-
-# image version
+/*
+ * (C) Copyright 2012
+ * Stefano Babic DENX Software Engineering sbabic@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not write to the Free Software
+ * Foundation Inc. 51 Franklin Street Fifth Floor Boston,
+ * MA 02110-1301 USA
+ *
+ * Refer docs/README.imxmage for more details about how-to configure
+ * and create imximage boot image
+ *
+ * The syntax is taken as close as possible with the kwbimage
+ */
+/* image version */
IMAGE_VERSION 2
-# Boot Device : one of
-# spi, sd (the board has no nand neither onenand)
-
+/*
+ * Boot Device : one of
+ * spi, sd (the board has no nand neither onenand)
+ */
BOOT_FROM nor
-# Device Configuration Data (DCD)
-#
-# Each entry must have the format:
-# Addr-type Address Value
-#
-# where:
-# Addr-type register length (1,2 or 4 bytes)
-# Address absolute address of the register
-# value value to be stored in the register
-
-# IOMUX for RAM only
+/*
+ * Device Configuration Data (DCD)
+ *
+ * Each entry must have the format:
+ * Addr-type Address Value
+ *
+ * where:
+ * Addr-type register length (1,2 or 4 bytes)
+ * Address absolute address of the register
+ * value value to be stored in the register
+ */
+/* IOMUX for RAM only */
DATA 4 0x53fa8554 0x300020
DATA 4 0x53fa8560 0x300020
DATA 4 0x53fa8594 0x300020
@@ -72,37 +74,47 @@ DATA 4 0x53fa86fc 0x0
DATA 4 0x53fa86f4 0x0
DATA 4 0x53fa8714 0x0
DATA 4 0x53fa8724 0x4000000
-#
-# DDR RAM
+
+/* DDR RAM */
DATA 4 0x63fd9088 0x40404040
DATA 4 0x63fd9090 0x40404040
DATA 4 0x63fd907C 0x01420143
DATA 4 0x63fd9080 0x01450146
DATA 4 0x63fd9018 0x00111740
DATA 4 0x63fd9000 0x84190000
-# esdcfgX
+
+/* esdcfgX */
DATA 4 0x63fd900C 0x9f5152e3
DATA 4 0x63fd9010 0xb68e8a63
DATA 4 0x63fd9014 0x01ff00db
-# Read/Write command delay
+
+/* Read/Write command delay */
DATA 4 0x63fd902c 0x000026d2
-# Out of reset delays
+
+/* Out of reset delays */
DATA 4 0x63fd9030 0x00ff0e21
-# ESDCTL ODT timing control
+
+/* ESDCTL ODT timing control */
DATA 4 0x63fd9008 0x12273030
-# ESDCTL power down control
+
+/* ESDCTL power down control */
DATA 4 0x63fd9004 0x0002002d
-# Set registers in DDR memory chips
+
+/* Set registers in DDR memory chips */
DATA 4 0x63fd901c 0x00008032
DATA 4 0x63fd901c 0x00008033
DATA 4 0x63fd901c 0x00028031
DATA 4 0x63fd901c 0x052080b0
DATA 4 0x63fd901c 0x04008040
-# ESDCTL refresh control
+
+/* ESDCTL refresh control */
DATA 4 0x63fd9020 0x00005800
-# PHY ZQ HW control
+
+/* PHY ZQ HW control */
DATA 4 0x63fd9040 0x05380003
-# PHY ODT control
+
+/* PHY ODT control */
DATA 4 0x63fd9058 0x00022222
-# start DDR3
+
+/* start DDR3 */
DATA 4 0x63fd901c 0x00000000
diff --git a/board/freescale/imx/ddr/mx6q_4x_mt41j128.cfg b/board/freescale/imx/ddr/mx6q_4x_mt41j128.cfg
index 62498abca3..c86cd407a2 100644
--- a/board/freescale/imx/ddr/mx6q_4x_mt41j128.cfg
+++ b/board/freescale/imx/ddr/mx6q_4x_mt41j128.cfg
@@ -1,47 +1,51 @@
-# Copyright (C) 2011 Freescale Semiconductor, Inc.
-# Jason Liu <r64343@freescale.com>
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not write to the Free Software
-# Foundation Inc. 51 Franklin Street Fifth Floor Boston,
-# MA 02110-1301 USA
-#
-# Refer docs/README.imxmage for more details about how-to configure
-# and create imximage boot image
-#
-# The syntax is taken as close as possible with the kwbimage
-
-# image version
-
+/*
+ * Copyright (C) 2011 Freescale Semiconductor, Inc.
+ * Jason Liu <r64343@freescale.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not write to the Free Software
+ * Foundation Inc. 51 Franklin Street Fifth Floor Boston,
+ * MA 02110-1301 USA
+ *
+ * Refer docs/README.imxmage for more details about how-to configure
+ * and create imximage boot image
+ *
+ * The syntax is taken as close as possible with the kwbimage
+ */
+
+/* image version */
IMAGE_VERSION 2
-# Boot Device : one of
-# spi, sd (the board has no nand neither onenand)
-
+/*
+ * Boot Device : one of
+ * spi, sd (the board has no nand neither onenand)
+ */
BOOT_FROM sd
-# Device Configuration Data (DCD)
-#
-# Each entry must have the format:
-# Addr-type Address Value
-#
-# where:
-# Addr-type register length (1,2 or 4 bytes)
-# Address absolute address of the register
-# value value to be stored in the register
+/*
+ * Device Configuration Data (DCD)
+ *
+ * Each entry must have the format:
+ * Addr-type Address Value
+ *
+ * where:
+ * Addr-type register length (1,2 or 4 bytes)
+ * Address absolute address of the register
+ * value value to be stored in the register
+ */
DATA 4 0x020e05a8 0x00000030
DATA 4 0x020e05b0 0x00000030
DATA 4 0x020e0524 0x00000030
@@ -154,7 +158,7 @@ DATA 4 0x021b48b8 0x00000800
DATA 4 0x021b001c 0x00000000
DATA 4 0x021b0404 0x00011006
-# set the default clock gate to save power
+/* set the default clock gate to save power */
DATA 4 0x020c4068 0x00C03F3F
DATA 4 0x020c406c 0x0030FC03
DATA 4 0x020c4070 0x0FFFC000
@@ -163,8 +167,8 @@ DATA 4 0x020c4078 0x00FFF300
DATA 4 0x020c407c 0x0F0000C3
DATA 4 0x020c4080 0x000003FF
-# enable AXI cache for VDOA/VPU/IPU
+/* enable AXI cache for VDOA/VPU/IPU */
DATA 4 0x020e0010 0xF00000CF
-# set IPU AXI-id0 Qos=0xf(bypass) AXI-id1 Qos=0x7
+/* set IPU AXI-id0 Qos=0xf(bypass) AXI-id1 Qos=0x7 */
DATA 4 0x020e0018 0x007F007F
DATA 4 0x020e001c 0x007F007F
diff --git a/board/freescale/mx25pdk/imximage.cfg b/board/freescale/mx25pdk/imximage.cfg
index f7af7ff1d0..c42a2836f7 100644
--- a/board/freescale/mx25pdk/imximage.cfg
+++ b/board/freescale/mx25pdk/imximage.cfg
@@ -1,46 +1,49 @@
-#
-# (C) Copyright 2009
-# Stefano Babic DENX Software Engineering sbabic@denx.de.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# Refer docs/README.imxmage for more details about how-to configure
-# and create imximage boot image
-#
-# The syntax is taken as close as possible with the kwbimage
-
-# Boot Device : one of
-# spi, sd (the board has no nand neither onenand)
+/*
+ * (C) Copyright 2009
+ * Stefano Babic DENX Software Engineering sbabic@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Refer docs/README.imxmage for more details about how-to configure
+ * and create imximage boot image
+ *
+ * The syntax is taken as close as possible with the kwbimage
+ */
+/*
+ * Boot Device : one of
+ * spi, sd (the board has no nand neither onenand)
+ */
BOOT_FROM sd
-# Device Configuration Data (DCD)
-#
-# Each entry must have the format:
-# Addr-type Address Value
-#
-# where:
-# Addr-type register length (1,2 or 4 bytes)
-# Address absolute address of the register
-# value value to be stored in the register
-
-# EIM config-CS5 init -- CPLD
+/*
+ * Device Configuration Data (DCD)
+ *
+ * Each entry must have the format:
+ * Addr-type Address Value
+ *
+ * where:
+ * Addr-type register length (1,2 or 4 bytes)
+ * Address absolute address of the register
+ * value value to be stored in the register
+ */
+/* EIM config-CS5 init -- CPLD */
DATA 4 0xB8002050 0x0000D843
DATA 4 0xB8002054 0x22252521
DATA 4 0xB8002058 0x22220A00
-# DDR2 init
+/* DDR2 init */
DATA 4 0xB8001004 0x0076E83A
DATA 4 0xB8001010 0x00000204
DATA 4 0xB8001000 0x92210000
@@ -67,7 +70,7 @@ DATA 4 0x43FAC454 0x00001000
DATA 4 0x53F80008 0x20034000
-# Enable the clocks
+/* Enable the clocks */
DATA 4 0x53f8000c 0x1fffffff
DATA 4 0x53f80010 0xffffffff
DATA 4 0x53f80014 0xfdfff
diff --git a/board/freescale/mx51evk/imximage.cfg b/board/freescale/mx51evk/imximage.cfg
index a875e8ff55..3e141eef3e 100644
--- a/board/freescale/mx51evk/imximage.cfg
+++ b/board/freescale/mx51evk/imximage.cfg
@@ -1,46 +1,50 @@
-#
-# (C Copyright 2009
-# Stefano Babic DENX Software Engineering sbabic@denx.de.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not write to the Free Software
-# Foundation Inc. 51 Franklin Street Fifth Floor Boston,
-# MA 02110-1301 USA
-#
-# Refer docs/README.imxmage for more details about how-to configure
-# and create imximage boot image
-#
-# The syntax is taken as close as possible with the kwbimage
-
-# Boot Device : one of
-# spi, sd (the board has no nand neither onenand)
+/*
+ * (C Copyright 2009
+ * Stefano Babic DENX Software Engineering sbabic@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not write to the Free Software
+ * Foundation Inc. 51 Franklin Street Fifth Floor Boston,
+ * MA 02110-1301 USA
+ *
+ * Refer docs/README.imxmage for more details about how-to configure
+ * and create imximage boot image
+ *
+ * The syntax is taken as close as possible with the kwbimage
+ */
+/*
+ * Boot Device : one of
+ * spi, sd (the board has no nand neither onenand)
+ */
BOOT_FROM spi
-# Device Configuration Data (DCD)
-#
-# Each entry must have the format:
-# Addr-type Address Value
-#
-# where:
-# Addr-type register length (1,2 or 4 bytes)
-# Address absolute address of the register
-# value value to be stored in the register
+/*
+ * Device Configuration Data (DCD)
+ *
+ * Each entry must have the format:
+ * Addr-type Address Value
+ *
+ * where:
+ * Addr-type register length (1,2 or 4 bytes)
+ * Address absolute address of the register
+ * value value to be stored in the register
+ */
-# Setting IOMUXC
+/* Setting IOMUXC */
DATA 4 0x73FA88a0 0x200
DATA 4 0x73FA850c 0x20c5
DATA 4 0x73FA8510 0x20c5
@@ -65,22 +69,24 @@ DATA 4 0x73FA88a4 0x6
DATA 4 0x73FA88ac 0x6
DATA 4 0x73FA88b8 0x6
-# Setting DDR for micron
-# 13 Rows, 10 Cols, 32 bit, SREF=4 Micron Model
-# CAS=3 BL=4
-# ESDCTL_ESDCTL0
+/*
+ * Setting DDR for micron
+ * 13 Rows, 10 Cols, 32 bit, SREF=4 Micron Model
+ * CAS=3 BL=4
+ */
+/* ESDCTL_ESDCTL0 */
DATA 4 0x83FD9000 0x82a20000
-# ESDCTL_ESDCTL1
+/* ESDCTL_ESDCTL1 */
DATA 4 0x83FD9008 0x82a20000
-# ESDCTL_ESDMISC
+/* ESDCTL_ESDMISC */
DATA 4 0x83FD9010 0x000ad0d0
-# ESDCTL_ESDCFG0
+/* ESDCTL_ESDCFG0 */
DATA 4 0x83FD9004 0x333574aa
-# ESDCTL_ESDCFG1
+/* ESDCTL_ESDCFG1 */
DATA 4 0x83FD900C 0x333574aa
-# Init DRAM on CS0
-# ESDCTL_ESDSCR
+/* Init DRAM on CS0 */
+/* ESDCTL_ESDSCR */
DATA 4 0x83FD9014 0x04008008
DATA 4 0x83FD9014 0x0000801a
DATA 4 0x83FD9014 0x0000801b
@@ -94,7 +100,7 @@ DATA 4 0x83FD9014 0x03808019
DATA 4 0x83FD9014 0x00408019
DATA 4 0x83FD9014 0x00008000
-# Init DRAM on CS1
+/* Init DRAM on CS1 */
DATA 4 0x83FD9014 0x0400800c
DATA 4 0x83FD9014 0x0000801e
DATA 4 0x83FD9014 0x0000801f
@@ -108,12 +114,12 @@ DATA 4 0x83FD9014 0x0380801d
DATA 4 0x83FD9014 0x0040801d
DATA 4 0x83FD9014 0x00008004
-# Write to CTL0
+/* Write to CTL0 */
DATA 4 0x83FD9000 0xb2a20000
-# Write to CTL1
+/* Write to CTL1 */
DATA 4 0x83FD9008 0xb2a20000
-# ESDMISC
+/* ESDMISC */
DATA 4 0x83FD9010 0x000ad6d0
-#ESDCTL_ESDCDLYGD
+/* ESDCTL_ESDCDLYGD */
DATA 4 0x83FD9034 0x90000000
DATA 4 0x83FD9014 0x00000000
diff --git a/board/freescale/mx53ard/imximage_dd3.cfg b/board/freescale/mx53ard/imximage_dd3.cfg
index 614d29e584..4633e4d38f 100644
--- a/board/freescale/mx53ard/imximage_dd3.cfg
+++ b/board/freescale/mx53ard/imximage_dd3.cfg
@@ -1,48 +1,51 @@
-#
-# (C) Copyright 2009
-# Stefano Babic DENX Software Engineering sbabic@denx.de.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not write to the Free Software
-# Foundation Inc. 51 Franklin Street Fifth Floor Boston,
-# MA 02110-1301 USA
-#
-# Refer docs/README.imxmage for more details about how-to configure
-# and create imximage boot image
-#
-# The syntax is taken as close as possible with the kwbimage
-
-# image version
+/*
+ * (C) Copyright 2009
+ * Stefano Babic DENX Software Engineering sbabic@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not write to the Free Software
+ * Foundation Inc. 51 Franklin Street Fifth Floor Boston,
+ * MA 02110-1301 USA
+ *
+ * Refer docs/README.imxmage for more details about how-to configure
+ * and create imximage boot image
+ *
+ * The syntax is taken as close as possible with the kwbimage
+ */
+/* image version */
IMAGE_VERSION 2
-# Boot Device : one of
-# spi, sd (the board has no nand neither onenand)
-
+/*
+ * Boot Device : one of
+ * spi, sd (the board has no nand neither onenand)
+ */
BOOT_FROM sd
-# Device Configuration Data (DCD)
-#
-# Each entry must have the format:
-# Addr-type Address Value
-#
-# where:
-# Addr-type register length (1,2 or 4 bytes)
-# Address absolute address of the register
-# value value to be stored in the register
+/*
+ * Device Configuration Data (DCD)
+ *
+ * Each entry must have the format:
+ * Addr-type Address Value
+ *
+ * where:
+ * Addr-type register length (1,2 or 4 bytes)
+ * Address absolute address of the register
+ * value value to be stored in the register
+ */
DATA 4 0x53fa8554 0x00300000
DATA 4 0x53fa8558 0x00300040
DATA 4 0x53fa8560 0x00300000
diff --git a/board/freescale/mx53evk/imximage.cfg b/board/freescale/mx53evk/imximage.cfg
index 915fb2cff5..1cd61d56cd 100644
--- a/board/freescale/mx53evk/imximage.cfg
+++ b/board/freescale/mx53evk/imximage.cfg
@@ -1,50 +1,52 @@
-#
-# (C Copyright 2009
-# Stefano Babic DENX Software Engineering sbabic@denx.de.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not write to the Free Software
-# Foundation Inc. 51 Franklin Street Fifth Floor Boston,
-# MA 02110-1301 USA
-#
-# Refer docs/README.imxmage for more details about how-to configure
-# and create imximage boot image
-#
-# The syntax is taken as close as possible with the kwbimage
-
-# image version
+/*
+ * (C Copyright 2009
+ * Stefano Babic DENX Software Engineering sbabic@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not write to the Free Software
+ * Foundation Inc. 51 Franklin Street Fifth Floor Boston,
+ * MA 02110-1301 USA
+ *
+ * Refer docs/README.imxmage for more details about how-to configure
+ * and create imximage boot image
+ *
+ * The syntax is taken as close as possible with the kwbimage
+ */
+/* image version */
IMAGE_VERSION 2
-# Boot Device : one of
-# spi, sd (the board has no nand neither onenand)
-
+/*
+ * Boot Device : one of
+ * spi, sd (the board has no nand neither onenand)
+ */
BOOT_FROM sd
-# Device Configuration Data (DCD)
-#
-# Each entry must have the format:
-# Addr-type Address Value
-#
-# where:
-# Addr-type register length (1,2 or 4 bytes)
-# Address absolute address of the register
-# value value to be stored in the register
-
-# Setting IOMUXC
+/*
+ * Device Configuration Data (DCD)
+ *
+ * Each entry must have the format:
+ * Addr-type Address Value
+ *
+ * where:
+ * Addr-type register length (1,2 or 4 bytes)
+ * Address absolute address of the register
+ * value value to be stored in the register
+ */
+/* Setting IOMUXC */
DATA 4 0x53fa8554 0x00200000
DATA 4 0x53fa8560 0x00200000
DATA 4 0x53fa8594 0x00200000
diff --git a/board/freescale/mx53loco/imximage.cfg b/board/freescale/mx53loco/imximage.cfg
index 2ce5f8dee8..e6b90c116f 100644
--- a/board/freescale/mx53loco/imximage.cfg
+++ b/board/freescale/mx53loco/imximage.cfg
@@ -1,48 +1,51 @@
-# Copyright (C) 2011 Freescale Semiconductor, Inc.
-# Jason Liu <r64343@freescale.com>
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not write to the Free Software
-# Foundation Inc. 51 Franklin Street Fifth Floor Boston,
-# MA 02110-1301 USA
-#
-# Refer docs/README.imxmage for more details about how-to configure
-# and create imximage boot image
-#
-# The syntax is taken as close as possible with the kwbimage
-
-# image version
+/*
+ * Copyright (C) 2011 Freescale Semiconductor, Inc.
+ * Jason Liu <r64343@freescale.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not write to the Free Software
+ * Foundation Inc. 51 Franklin Street Fifth Floor Boston,
+ * MA 02110-1301 USA
+ *
+ * Refer docs/README.imxmage for more details about how-to configure
+ * and create imximage boot image
+ *
+ * The syntax is taken as close as possible with the kwbimage
+ */
+/* image version */
IMAGE_VERSION 2
-# Boot Device : one of
-# spi, sd (the board has no nand neither onenand)
-
+/*
+ * Boot Device : one of
+ * spi, sd (the board has no nand neither onenand)
+ */
BOOT_FROM sd
-# Device Configuration Data (DCD)
-#
-# Each entry must have the format:
-# Addr-type Address Value
-#
-# where:
-# Addr-type register length (1,2 or 4 bytes)
-# Address absolute address of the register
-# value value to be stored in the register
-
+/*
+ * Device Configuration Data (DCD)
+ *
+ * Each entry must have the format:
+ * Addr-type Address Value
+ *
+ * where:
+ * Addr-type register length (1,2 or 4 bytes)
+ * Address absolute address of the register
+ * value value to be stored in the register
+ */
DATA 4 0x53fa8554 0x00300000
DATA 4 0x53fa8558 0x00300040
DATA 4 0x53fa8560 0x00300000
diff --git a/board/freescale/mx53smd/imximage.cfg b/board/freescale/mx53smd/imximage.cfg
index 614d29e584..4633e4d38f 100644
--- a/board/freescale/mx53smd/imximage.cfg
+++ b/board/freescale/mx53smd/imximage.cfg
@@ -1,48 +1,51 @@
-#
-# (C) Copyright 2009
-# Stefano Babic DENX Software Engineering sbabic@denx.de.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not write to the Free Software
-# Foundation Inc. 51 Franklin Street Fifth Floor Boston,
-# MA 02110-1301 USA
-#
-# Refer docs/README.imxmage for more details about how-to configure
-# and create imximage boot image
-#
-# The syntax is taken as close as possible with the kwbimage
-
-# image version
+/*
+ * (C) Copyright 2009
+ * Stefano Babic DENX Software Engineering sbabic@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not write to the Free Software
+ * Foundation Inc. 51 Franklin Street Fifth Floor Boston,
+ * MA 02110-1301 USA
+ *
+ * Refer docs/README.imxmage for more details about how-to configure
+ * and create imximage boot image
+ *
+ * The syntax is taken as close as possible with the kwbimage
+ */
+/* image version */
IMAGE_VERSION 2
-# Boot Device : one of
-# spi, sd (the board has no nand neither onenand)
-
+/*
+ * Boot Device : one of
+ * spi, sd (the board has no nand neither onenand)
+ */
BOOT_FROM sd
-# Device Configuration Data (DCD)
-#
-# Each entry must have the format:
-# Addr-type Address Value
-#
-# where:
-# Addr-type register length (1,2 or 4 bytes)
-# Address absolute address of the register
-# value value to be stored in the register
+/*
+ * Device Configuration Data (DCD)
+ *
+ * Each entry must have the format:
+ * Addr-type Address Value
+ *
+ * where:
+ * Addr-type register length (1,2 or 4 bytes)
+ * Address absolute address of the register
+ * value value to be stored in the register
+ */
DATA 4 0x53fa8554 0x00300000
DATA 4 0x53fa8558 0x00300040
DATA 4 0x53fa8560 0x00300000
diff --git a/board/freescale/mx6qarm2/imximage.cfg b/board/freescale/mx6qarm2/imximage.cfg
index bf941a3198..4ed211eedd 100644
--- a/board/freescale/mx6qarm2/imximage.cfg
+++ b/board/freescale/mx6qarm2/imximage.cfg
@@ -1,47 +1,51 @@
-# Copyright (C) 2011 Freescale Semiconductor, Inc.
-# Jason Liu <r64343@freescale.com>
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not write to the Free Software
-# Foundation Inc. 51 Franklin Street Fifth Floor Boston,
-# MA 02110-1301 USA
-#
-# Refer docs/README.imxmage for more details about how-to configure
-# and create imximage boot image
-#
-# The syntax is taken as close as possible with the kwbimage
-
-# image version
-
+/*
+ * Copyright (C) 2011 Freescale Semiconductor, Inc.
+ * Jason Liu <r64343@freescale.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not write to the Free Software
+ * Foundation Inc. 51 Franklin Street Fifth Floor Boston,
+ * MA 02110-1301 USA
+ *
+ * Refer docs/README.imxmage for more details about how-to configure
+ * and create imximage boot image
+ *
+ * The syntax is taken as close as possible with the kwbimage
+ */
+
+/* image version */
IMAGE_VERSION 2
-# Boot Device : one of
-# spi, sd (the board has no nand neither onenand)
-
+/*
+ * Boot Device : one of
+ * spi, sd (the board has no nand neither onenand)
+ */
BOOT_FROM sd
-# Device Configuration Data (DCD)
-#
-# Each entry must have the format:
-# Addr-type Address Value
-#
-# where:
-# Addr-type register length (1,2 or 4 bytes)
-# Address absolute address of the register
-# value value to be stored in the register
+/*
+ * Device Configuration Data (DCD)
+ *
+ * Each entry must have the format:
+ * Addr-type Address Value
+ *
+ * where:
+ * Addr-type register length (1,2 or 4 bytes)
+ * Address absolute address of the register
+ * value value to be stored in the register
+ */
DATA 4 0x020e05a8 0x00000030
DATA 4 0x020e05b0 0x00000030
DATA 4 0x020e0524 0x00000030
@@ -166,8 +170,8 @@ DATA 4 0x020c4078 0x00FFF300
DATA 4 0x020c407c 0x0F0000C3
DATA 4 0x020c4080 0x000003FF
-# enable AXI cache for VDOA/VPU/IPU
+/* enable AXI cache for VDOA/VPU/IPU */
DATA 4 0x020e0010 0xF00000CF
-# set IPU AXI-id0 Qos=0xf(bypass) AXI-id1 Qos=0x7
+/* set IPU AXI-id0 Qos=0xf(bypass) AXI-id1 Qos=0x7 */
DATA 4 0x020e0018 0x007F007F
DATA 4 0x020e001c 0x007F007F
diff --git a/board/freescale/mx6qsabreauto/imximage.cfg b/board/freescale/mx6qsabreauto/imximage.cfg
index d909aa8208..bbff813958 100644
--- a/board/freescale/mx6qsabreauto/imximage.cfg
+++ b/board/freescale/mx6qsabreauto/imximage.cfg
@@ -1,46 +1,50 @@
-# Copyright (C) 2012 Freescale Semiconductor, Inc.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not write to the Free Software
-# Foundation Inc. 51 Franklin Street Fifth Floor Boston,
-# MA 02110-1301 USA
-#
-# Refer docs/README.imxmage for more details about how-to configure
-# and create imximage boot image
-#
-# The syntax is taken as close as possible with the kwbimage
-
-# image version
+/*
+ * Copyright (C) 2012 Freescale Semiconductor, Inc.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not write to the Free Software
+ * Foundation Inc. 51 Franklin Street Fifth Floor Boston,
+ * MA 02110-1301 USA
+ *
+ * Refer docs/README.imxmage for more details about how-to configure
+ * and create imximage boot image
+ *
+ * The syntax is taken as close as possible with the kwbimage
+ */
+/* image version */
IMAGE_VERSION 2
-# Boot Device : one of
-# spi, sd (the board has no nand neither onenand)
-
+/*
+ * Boot Device : one of
+ * spi, sd (the board has no nand neither onenand)
+ */
BOOT_FROM sd
-# Device Configuration Data (DCD)
-#
-# Each entry must have the format:
-# Addr-type Address Value
-#
-# where:
-# Addr-type register length (1,2 or 4 bytes)
-# Address absolute address of the register
-# value value to be stored in the register
+/*
+ * Device Configuration Data (DCD)
+ *
+ * Each entry must have the format:
+ * Addr-type Address Value
+ *
+ * where:
+ * Addr-type register length (1,2 or 4 bytes)
+ * Address absolute address of the register
+ * value value to be stored in the register
+ */
DATA 4 0x020e05a8 0x00000028
DATA 4 0x020e05b0 0x00000028
DATA 4 0x020e0524 0x00000028
@@ -126,7 +130,7 @@ DATA 4 0x021b0020 0x00005800
DATA 4 0x021b0818 0x00000007
DATA 4 0x021b4818 0x00000007
-# Calibration values based on ARD and 528MHz
+/* Calibration values based on ARD and 528MHz */
DATA 4 0x021b083c 0x434B0358
DATA 4 0x021b0840 0x033D033C
DATA 4 0x021b483c 0x03520362
diff --git a/board/genesi/mx51_efikamx/imximage_mx.cfg b/board/genesi/mx51_efikamx/imximage_mx.cfg
index 38fa760e4b..21ff6d678e 100644
--- a/board/genesi/mx51_efikamx/imximage_mx.cfg
+++ b/board/genesi/mx51_efikamx/imximage_mx.cfg
@@ -1,52 +1,58 @@
-#
-# Copyright (C) 2009 Pegatron Corporation
-# Copyright (C) 2010 Marek Vasut <marek.vasut@gmail.com>
-# Copyright (C) 2009-2012 Genesi USA, Inc.
-#
-# BASED ON: imx51evk
-#
-# (C) Copyright 2009
-# Stefano Babic DENX Software Engineering sbabic@denx.de.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not write to the Free Software
-# Foundation Inc. 51 Franklin Street Fifth Floor Boston,
-# MA 02110-1301 USA
-#
-# Refer docs/README.imxmage for more details about how-to configure
-# and create imximage boot image
-#
-# The syntax is taken as close as possible with the kwbimage
+/*
+ * Copyright (C) 2009 Pegatron Corporation
+ * Copyright (C) 2010 Marek Vasut <marek.vasut@gmail.com>
+ * Copyright (C) 2009-2012 Genesi USA, Inc.
+ *
+ * BASED ON: imx51evk
+ *
+ * (C) Copyright 2009
+ * Stefano Babic DENX Software Engineering sbabic@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not write to the Free Software
+ * Foundation Inc. 51 Franklin Street Fifth Floor Boston,
+ * MA 02110-1301 USA
+ *
+ * Refer docs/README.imxmage for more details about how-to configure
+ * and create imximage boot image
+ *
+ * The syntax is taken as close as possible with the kwbimage
+ */
-# Boot Device : one of
-# spi, sd (the board has no nand neither onenand)
+/*
+ * Boot Device : one of
+ * spi, sd (the board has no nand neither onenand)
+ */
BOOT_FROM spi
-# Device Configuration Data (DCD)
-#
-# Each entry must have the format:
-# Addr-type Address Value
-#
-# where:
-# Addr-type register length (1,2 or 4 bytes)
-# Address absolute address of the register
-# value value to be stored in the register
-
-# Essential GPIO settings to be done as early as possible
-# PCBIDn pad settings are all the defaults except #2 which needs HVE off
+/*
+ * Device Configuration Data (DCD)
+ *
+ * Each entry must have the format:
+ * Addr-type Address Value
+ *
+ * where:
+ * Addr-type register length (1,2 or 4 bytes)
+ * Address absolute address of the register
+ * value value to be stored in the register
+ */
+/*
+ * Essential GPIO settings to be done as early as possible
+ * PCBIDn pad settings are all the defaults except #2 which needs HVE off
+ */
DATA 4 0x73fa8134 0x3 # PCBID0 ALT3 GPIO 3_16
DATA 4 0x73fa8130 0x3 # PCBID1 ALT3 GPIO 3_17
DATA 4 0x73fa8128 0x3 # PCBID2 ALT3 GPIO 3_11
@@ -55,7 +61,7 @@ DATA 4 0x73fa8198 0x3 # LED0 ALT3 GPIO 3_13
DATA 4 0x73fa81c4 0x3 # LED1 ALT3 GPIO 3_14
DATA 4 0x73fa81c8 0x3 # LED2 ALT3 GPIO 3_15
-# DDR bus IOMUX PAD settings
+/* DDR bus IOMUX PAD settings */
DATA 4 0x73fa850c 0x20c5 # SDODT1
DATA 4 0x73fa8510 0x20c5 # SDODT0
DATA 4 0x73fa84ac 0xc5 # SDWE
@@ -72,22 +78,24 @@ DATA 4 0x73fa84d8 0xc5 # DRAM_DQM1
DATA 4 0x73fa84dc 0xc5 # DRAM_DQM2
DATA 4 0x73fa84e0 0xc5 # DRAM_DQM3
-# Setting DDR for micron
-# 13 Rows, 10 Cols, 32 bit, SREF=4 Micron Model
-# CAS=3 BL=4
-# ESDCTL_ESDCTL0
+/*
+ * Setting DDR for micron
+ * 13 Rows, 10 Cols, 32 bit, SREF=4 Micron Model
+ * CAS=3 BL=4
+ */
+/* ESDCTL_ESDCTL0 */
DATA 4 0x83fd9000 0x82a20000
-# ESDCTL_ESDCTL1
+/* ESDCTL_ESDCTL1 */
DATA 4 0x83fd9008 0x82a20000
-# ESDCTL_ESDMISC
+/* ESDCTL_ESDMISC */
DATA 4 0x83fd9010 0xcaaaf6d0
-# ESDCTL_ESDCFG0
+/* ESDCTL_ESDCFG0 */
DATA 4 0x83fd9004 0x3f3574aa
-# ESDCTL_ESDCFG1
+/* ESDCTL_ESDCFG1 */
DATA 4 0x83fd900c 0x3f3574aa
-# Init DRAM on CS0
-# ESDCTL_ESDSCR
+/* Init DRAM on CS0 */
+/* ESDCTL_ESDSCR */
DATA 4 0x83fd9014 0x04008008
DATA 4 0x83fd9014 0x0000801a
DATA 4 0x83fd9014 0x0000801b
@@ -101,7 +109,7 @@ DATA 4 0x83fd9014 0x03808019
DATA 4 0x83fd9014 0x00408019
DATA 4 0x83fd9014 0x00008000
-# Init DRAM on CS1
+/* Init DRAM on CS1 */
DATA 4 0x83fd9014 0x0400800c
DATA 4 0x83fd9014 0x0000801e
DATA 4 0x83fd9014 0x0000801f
@@ -115,12 +123,12 @@ DATA 4 0x83fd9014 0x0380801d
DATA 4 0x83fd9014 0x0040801d
DATA 4 0x83fd9014 0x00008004
-# Write to CTL0
+/* Write to CTL0 */
DATA 4 0x83fd9000 0xb2a20000
-# Write to CTL1
+/* Write to CTL1 */
DATA 4 0x83fd9008 0xb2a20000
-# ESDMISC
+/* ESDMISC */
DATA 4 0x83fd9010 0x000ad6d0
-#ESDCTL_ESDCDLYGD
+/* ESDCTL_ESDCDLYGD */
DATA 4 0x83fd9034 0x90000000
DATA 4 0x83fd9014 0x00000000
diff --git a/board/genesi/mx51_efikamx/imximage_sb.cfg b/board/genesi/mx51_efikamx/imximage_sb.cfg
index 26d259f2c2..7ddd0b15b1 100644
--- a/board/genesi/mx51_efikamx/imximage_sb.cfg
+++ b/board/genesi/mx51_efikamx/imximage_sb.cfg
@@ -1,51 +1,55 @@
-#
-# Copyright (C) 2009 Pegatron Corporation
-# Copyright (C) 2010 Marek Vasut <marek.vasut@gmail.com>
-# Copyright (C) 2009-2012 Genesi USA, Inc.
-#
-# BASED ON: imx51evk
-#
-# (C) Copyright 2009
-# Stefano Babic DENX Software Engineering sbabic@denx.de.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not write to the Free Software
-# Foundation Inc. 51 Franklin Street Fifth Floor Boston,
-# MA 02110-1301 USA
-#
-# Refer docs/README.imxmage for more details about how-to configure
-# and create imximage boot image
-#
-# The syntax is taken as close as possible with the kwbimage
+/*
+ * Copyright (C) 2009 Pegatron Corporation
+ * Copyright (C) 2010 Marek Vasut <marek.vasut@gmail.com>
+ * Copyright (C) 2009-2012 Genesi USA, Inc.
+ *
+ * BASED ON: imx51evk
+ *
+ * (C) Copyright 2009
+ * Stefano Babic DENX Software Engineering sbabic@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not write to the Free Software
+ * Foundation Inc. 51 Franklin Street Fifth Floor Boston,
+ * MA 02110-1301 USA
+ *
+ * Refer docs/README.imxmage for more details about how-to configure
+ * and create imximage boot image
+ *
+ * The syntax is taken as close as possible with the kwbimage
+ */
-# Boot Device : one of
-# spi, sd (the board has no nand neither onenand)
+/*
+ * Boot Device : one of
+ * spi, sd (the board has no nand neither onenand)
+ */
BOOT_FROM spi
-# Device Configuration Data (DCD)
-#
-# Each entry must have the format:
-# Addr-type Address Value
-#
-# where:
-# Addr-type register length (1,2 or 4 bytes)
-# Address absolute address of the register
-# value value to be stored in the register
-
-# DDR bus IOMUX PAD settings
+/*
+ * Device Configuration Data (DCD)
+ *
+ * Each entry must have the format:
+ * Addr-type Address Value
+ *
+ * where:
+ * Addr-type register length (1,2 or 4 bytes)
+ * Address absolute address of the register
+ * value value to be stored in the register
+*/
+/* DDR bus IOMUX PAD settings */
DATA 4 0x73fa88a0 0x200 # GRP_INMODE1
DATA 4 0x73fa850c 0x20c5 # SDODT1
DATA 4 0x73fa8510 0x20c5 # SDODT0
@@ -62,22 +66,24 @@ DATA 4 0x73fa84b4 0xe5 # SDCKE1
DATA 4 0x73fa84cc 0xe5 # DRAM_CS0
DATA 4 0x73fa84d0 0xe4 # DRAM_CS1
-# Setting DDR for micron
-# 13 Rows, 10 Cols, 32 bit, SREF=4 Micron Model
-# CAS=3 BL=4
-# ESDCTL_ESDCTL0
+/*
+ * Setting DDR for micron
+ * 13 Rows, 10 Cols, 32 bit, SREF=4 Micron Model
+ * CAS=3 BL=4
+ */
+/* ESDCTL_ESDCTL0 */
DATA 4 0x83fd9000 0x82a20000
-# ESDCTL_ESDCTL1
+/* ESDCTL_ESDCTL1 */
DATA 4 0x83fd9008 0x82a20000
-# ESDCTL_ESDMISC
+/* ESDCTL_ESDMISC */
DATA 4 0x83fd9010 0xcaaaf6d0
-# ESDCTL_ESDCFG0
+/* ESDCTL_ESDCFG0 */
DATA 4 0x83fd9004 0x333574aa
-# ESDCTL_ESDCFG1
+/* ESDCTL_ESDCFG1 */
DATA 4 0x83fd900c 0x333574aa
-# Init DRAM on CS0
-# ESDCTL_ESDSCR
+/* Init DRAM on CS0 */
+/* ESDCTL_ESDSCR */
DATA 4 0x83fd9014 0x04008008
DATA 4 0x83fd9014 0x0000801a
DATA 4 0x83fd9014 0x0000801b
@@ -91,7 +97,7 @@ DATA 4 0x83fd9014 0x03808019
DATA 4 0x83fd9014 0x00408019
DATA 4 0x83fd9014 0x00008000
-# Init DRAM on CS1
+/* Init DRAM on CS1 */
DATA 4 0x83fd9014 0x0400800c
DATA 4 0x83fd9014 0x0000801e
DATA 4 0x83fd9014 0x0000801f
@@ -105,12 +111,12 @@ DATA 4 0x83fd9014 0x0380801d
DATA 4 0x83fd9014 0x0042801d
DATA 4 0x83fd9014 0x00008004
-# Write to CTL0
+/* Write to CTL0 */
DATA 4 0x83fd9000 0xb2a20000
-# Write to CTL1
+/* Write to CTL1 */
DATA 4 0x83fd9008 0xb2a20000
-# ESDMISC
+/* ESDMISC */
DATA 4 0x83fd9010 0xcaaaf6d0
-#ESDCTL_ESDCDLYGD
+/* ESDCTL_ESDCDLYGD */
DATA 4 0x83fd9034 0x90000000
DATA 4 0x83fd9014 0x00000000
diff --git a/board/ttcontrol/vision2/imximage_hynix.cfg b/board/ttcontrol/vision2/imximage_hynix.cfg
index ed531db0bc..c1de94fa13 100644
--- a/board/ttcontrol/vision2/imximage_hynix.cfg
+++ b/board/ttcontrol/vision2/imximage_hynix.cfg
@@ -1,209 +1,228 @@
-#
-# (C) Copyright 2009
-# Stefano Babic DENX Software Engineering sbabic@denx.de.
-#
-# (C) Copyright 2010
-# Klaus Steinhammer TTECH Control Gmbh kst@tttech.com
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not write to the Free Software
-# Foundation Inc. 51 Franklin Street Fifth Floor Boston,
-# MA 02110-1301 USA
-#
-# Refer docs/README.imxmage for more details about how-to configure
-# and create imximage boot image
-#
-# The syntax is taken as close as possible with the kwbimage
-
-# Boot Device : one of
-# spi, nand, onenand, sd
-
+/*
+ * (C) Copyright 2009
+ * Stefano Babic DENX Software Engineering sbabic@denx.de.
+ *
+ * (C) Copyright 2010
+ * Klaus Steinhammer TTECH Control Gmbh kst@tttech.com
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not write to the Free Software
+ * Foundation Inc. 51 Franklin Street Fifth Floor Boston,
+ * MA 02110-1301 USA
+ *
+ * Refer docs/README.imxmage for more details about how-to configure
+ * and create imximage boot image
+ *
+ * The syntax is taken as close as possible with the kwbimage
+ */
+
+/*
+ * Boot Device : one of
+ * spi, nand, onenand, sd
+ */
BOOT_FROM spi
-# Device Configuration Data (DCD)
-#
-# Each entry must have the format:
-# Addr-type Address Value
-#
-# where:
-# Addr-type register length (1,2 or 4 bytes)
-# Address absolute address of the register
-# value value to be stored in the register
-
-#######################
-### Disable WDOG ###
-#######################
+/*
+ * Device Configuration Data (DCD)
+ *
+ * Each entry must have the format:
+ * Addr-type Address Value
+ *
+ * where:
+ * Addr-type register length (1,2 or 4 bytes)
+ * Address absolute address of the register
+ * value value to be stored in the register
+ */
+
+/*
+ * #######################
+ * ### Disable WDOG ###
+ * #######################
+ */
DATA 2 0x73f98000 0x30
-#######################
-### SET DDR Clk ###
-#######################
-
-# CCM: CBMCR - ddr_clk_sel: axi_b (133MHz)
+/*
+ * #######################
+ * ### SET DDR Clk ###
+ * #######################
+ */
+/* CCM: CBMCR - ddr_clk_sel: axi_b (133MHz) */
DATA 4 0x73FD4018 0x000024C0
-# DOUBLE SPI CLK (13MHz->26 MHz Clock)
+/* DOUBLE SPI CLK (13MHz->26 MHz Clock) */
DATA 4 0x73FD4038 0x2010241
-#IOMUXC_SW_PAD_CTL_PAD_CSPI1_MOSI HYS_ENABLE | DRV_MAX | SRE_FAST
+/* IOMUXC_SW_PAD_CTL_PAD_CSPI1_MOSI HYS_ENABLE | DRV_MAX | SRE_FAST */
DATA 4 0x73fa8600 0x00000107
-#IOMUXC_SW_PAD_CTL_PAD_CSPI1_MISO HYS_ENABLE | DRV_MAX | SRE_FAST
+/* IOMUXC_SW_PAD_CTL_PAD_CSPI1_MISO HYS_ENABLE | DRV_MAX | SRE_FAST */
DATA 4 0x73fa8604 0x00000107
-#IOMUXC_SW_PAD_CTL_PAD_CSPI1_SS0 HYS_ENABLE | PKE_ENABLE | DRV_MAX | SRE_FAST
+/* IOMUXC_SW_PAD_CTL_PAD_CSPI1_SS0 HYS_ENABLE | PKE_ENABLE | DRV_MAX | SRE_FAST */
DATA 4 0x73fa8608 0x00000187
-#IOMUXC_SW_PAD_CTL_PAD_CSPI1_SS1 HYS_ENABLE | PKE_ENABLE | DRV_MAX | SRE_FAST
+/* IOMUXC_SW_PAD_CTL_PAD_CSPI1_SS1 HYS_ENABLE | PKE_ENABLE | DRV_MAX | SRE_FAST */
DATA 4 0x73fa860c 0x00000187
-#IOMUXC_SW_PAD_CTL_PAD_CSPI1_SCLK HYS_ENABLE | DRV_MAX | SRE_FAST
+/* IOMUXC_SW_PAD_CTL_PAD_CSPI1_SCLK HYS_ENABLE | DRV_MAX | SRE_FAST */
DATA 4 0x73fa8614 0x00000107
-#IOMUXC_SW_PAD_CTL_PAD_DI1_PIN11 HYS_ENABLE | DRV_MAX | SRE_FAST (CSPI1_SS2)
+/* IOMUXC_SW_PAD_CTL_PAD_DI1_PIN11 HYS_ENABLE | DRV_MAX | SRE_FAST (CSPI1_SS2) */
DATA 4 0x73fa86a8 0x00000187
-#######################
-### Settings IOMUXC ###
-#######################
-
-# DDR IOMUX configuration
-# Control, Data, Address pads are in their default state: HIGH DS, FAST SR.
-# IOMUXC_SW_PAD_CTL_PAD_DRAM_SDCLK MAX DS
+/*
+ * #######################
+ * ### Settings IOMUXC ###
+ * #######################
+ */
+/*
+ * DDR IOMUX configuration
+ * Control, Data, Address pads are in their default state: HIGH DS, FAST SR.
+ * IOMUXC_SW_PAD_CTL_PAD_DRAM_SDCLK MAX DS
+ */
DATA 4 0x73fa84b8 0x000000e7
-# PVTC MAX (at GPC, PGR reg)
-#DATA 4 0x73FD8004 0x1fc00000
+/* PVTC MAX (at GPC, PGR reg) */
+/* DATA 4 0x73FD8004 0x1fc00000 */
-#DQM0 DS high slew rate slow
+/* DQM0 DS high slew rate slow */
DATA 4 0x73fa84d4 0x000000e4
-#DQM1 DS high slew rate slow
+/* DQM1 DS high slew rate slow */
DATA 4 0x73fa84d8 0x000000e4
-#DQM2 DS high slew rate slow
+/* DQM2 DS high slew rate slow */
DATA 4 0x73fa84dc 0x000000e4
-#DQM3 DS high slew rate slow
+/* DQM3 DS high slew rate slow */
DATA 4 0x73fa84e0 0x000000e4
-#IOMUXC_SW_PAD_CTL_PAD_DRAM_SDQS0 DS high & SLEW slow
+/* IOMUXC_SW_PAD_CTL_PAD_DRAM_SDQS0 DS high & SLEW slow */
DATA 4 0x73fa84bc 0x000000c4
-#IOMUXC_SW_PAD_CTL_PAD_DRAM_SDQS1 DS high & SLEW slow
+/* IOMUXC_SW_PAD_CTL_PAD_DRAM_SDQS1 DS high & SLEW slow */
DATA 4 0x73fa84c0 0x000000c4
-#IOMUXC_SW_PAD_CTL_PAD_DRAM_SDQS2 DS high & SLEW slow
+/* IOMUXC_SW_PAD_CTL_PAD_DRAM_SDQS2 DS high & SLEW slow */
DATA 4 0x73fa84c4 0x000000c4
-#IOMUXC_SW_PAD_CTL_PAD_DRAM_SDQS3 DS high & SLEW slow
+/* IOMUXC_SW_PAD_CTL_PAD_DRAM_SDQS3 DS high & SLEW slow */
DATA 4 0x73fa84c8 0x000000c4
-#DRAM_DATA B0
+/* DRAM_DATA B0 */
DATA 4 0x73fa88a4 0x00000004
-#DRAM_DATA B1
+/* DRAM_DATA B1 */
DATA 4 0x73fa88ac 0x00000004
-#DRAM_DATA B2
+/* DRAM_DATA B2 */
DATA 4 0x73fa88b8 0x00000004
-#DRAM_DATA B3
+/* DRAM_DATA B3 */
DATA 4 0x73fa882c 0x00000004
-#DRAM_DATA B0 slew rate
+/* DRAM_DATA B0 slew rate */
DATA 4 0x73fa8878 0x00000000
-#DRAM_DATA B1 slew rate
+/* DRAM_DATA B1 slew rate */
DATA 4 0x73fa8880 0x00000000
-#DRAM_DATA B2 slew rate
+/* DRAM_DATA B2 slew rate */
DATA 4 0x73fa888c 0x00000000
-#DRAM_DATA B3 slew rate
+/* DRAM_DATA B3 slew rate */
DATA 4 0x73fa889c 0x00000000
-#######################
-### Configure SDRAM ###
-#######################
+/*
+ * #######################
+ * ### Configure SDRAM ###
+ * #######################
+ */
-# Configure CS0
-#######################
+/* Configure CS0 */
+/* ####################### */
-# ESDCTL0: Enable controller
+/* ESDCTL0: Enable controller */
DATA 4 0x83fd9000 0x83220000
-# Init DRAM on CS0
-# ESDSCR: Precharge command
+/* Init DRAM on CS0 /
+/* ESDSCR: Precharge command */
DATA 4 0x83fd9014 0x04008008
-# ESDSCR: Refresh command
+/* ESDSCR: Refresh command */
DATA 4 0x83fd9014 0x00008010
-# ESDSCR: Refresh command
+/* ESDSCR: Refresh command */
DATA 4 0x83fd9014 0x00008010
-# ESDSCR: LMR with CAS=3 and BL=3 (Burst Length = 8)
+/* ESDSCR: LMR with CAS=3 and BL=3 (Burst Length = 8) */
DATA 4 0x83fd9014 0x00338018
-# ESDSCR: EMR with half Drive strength (= medium strength @ i.MX51)
+/* ESDSCR: EMR with half Drive strength (= medium strength @ i.MX51) */
DATA 4 0x83fd9014 0x0020801a
-# ESDSCR
+/* ESDSCR */
DATA 4 0x83fd9014 0x00008000
-# ESDSCR: EMR with full Drive strength
-#DATA 4 0x83fd9014 0x0000801a
+/* ESDSCR: EMR with full Drive strength */
+/* DATA 4 0x83fd9014 0x0000801a */
-# ESDCTL0: 14 ROW, 10 COL, 32Bit, SREF=8
+/* ESDCTL0: 14 ROW, 10 COL, 32Bit, SREF=8 */
DATA 4 0x83fd9000 0xC3220000
-# ESDCFG0: tRFC:22clks, tXSR:28clks, tXP:2clks, tWTR:2clk, tRP:3clks, tMRD:2clks
-# tRAS:8clks, tRRD:2clks, tWR:3clks, tRCD:3clks, tRC:11clks
-#DATA 4 0x83fd9004 0xC33574AA
-
-#micron mDDR
-# ESDCFG0: tRFC:11clks, tXSR:19clks, tXP:1clks, tWTR:2clk, tRP:3clks, tMRD:2clks
-# tRAS:7clks, tRRD:2clks, tWR:3clks, tRCD:3clks, tRC:9clks
-#DATA 4 0x83FD9004 0x101564a8
-
-#hynix mDDR
-# ESDCFG0: tRFC:17clks, tXSR:21clks, tXP:3clks, tWTR:1clk, tRP:3clks, tMRD:2clks
-# tRAS:7clks, tRRD:2clks, tWR:3clks, tRCD:3clks, tRC:9clks
+/*
+ * ESDCFG0: tRFC:22clks, tXSR:28clks, tXP:2clks, tWTR:2clk, tRP:3clks, tMRD:2clks
+ * tRAS:8clks, tRRD:2clks, tWR:3clks, tRCD:3clks, tRC:11clks
+ * DATA 4 0x83fd9004 0xC33574AA
+ */
+/*
+ * micron mDDR
+ * ESDCFG0: tRFC:11clks, tXSR:19clks, tXP:1clks, tWTR:2clk, tRP:3clks, tMRD:2clks
+ * tRAS:7clks, tRRD:2clks, tWR:3clks, tRCD:3clks, tRC:9clks
+ * DATA 4 0x83FD9004 0x101564a8
+ */
+/*
+ * hynix mDDR
+ * ESDCFG0: tRFC:17clks, tXSR:21clks, tXP:3clks, tWTR:1clk, tRP:3clks, tMRD:2clks
+ * tRAS:7clks, tRRD:2clks, tWR:3clks, tRCD:3clks, tRC:9clks
+ */
DATA 4 0x83FD9004 0x704564a8
-# ESDMISC: AP=10, Bank interleaving on, MIF3 en, RALAT=2
+/* ESDMISC: AP=10, Bank interleaving on, MIF3 en, RALAT=2 */
DATA 4 0x83fd9010 0x000a1700
-# Configure CS1
-#######################
+/* Configure CS1 */
+/* ####################### */
-# ESDCTL1: Enable controller
+/* ESDCTL1: Enable controller */
DATA 4 0x83fd9008 0x83220000
-# Init DRAM on CS1
-# ESDSCR: Precharge command
+/* Init DRAM on CS1 */
+/* ESDSCR: Precharge command */
DATA 4 0x83fd9014 0x0400800c
-# ESDSCR: Refresh command
+/* ESDSCR: Refresh command */
DATA 4 0x83fd9014 0x00008014
-# ESDSCR: Refresh command
+/* ESDSCR: Refresh command */
DATA 4 0x83fd9014 0x00008014
-# ESDSCR: LMR with CAS=3 and BL=3 (Burst Length = 8)
+/* ESDSCR: LMR with CAS=3 and BL=3 (Burst Length = 8) */
DATA 4 0x83fd9014 0x0033801c
-# ESDSCR: EMR with half Drive strength (= medium strength @ i.MX51)
+/* ESDSCR: EMR with half Drive strength (= medium strength @ i.MX51) */
DATA 4 0x83fd9014 0x0020801e
-# ESDSCR
+/* ESDSCR */
DATA 4 0x83fd9014 0x00008004
-# ESDCTL1: 14 ROW, 10 COL, 32Bit, SREF=8
+/* ESDCTL1: 14 ROW, 10 COL, 32Bit, SREF=8 */
DATA 4 0x83fd9008 0xC3220000
-
-# ESDCFG1: tRFC:22clks, tXSR:28clks, tXP:2clks, tWTR:2clk, tRP:3clks, tMRD:2clks
-# tRAS:8clks, tRRD:2clks, tWR:3clks, tRCD:3clks, tRC:11clks
-#DATA 4 0x83fd900c 0xC33574AA
-
-#micron mDDR
-# ESDCFG1: tRFC:11clks, tXSR:19clks, tXP:1clks, tWTR:2clk, tRP:3clks, tMRD:2clks
-# tRAS:7clks, tRRD:2clks, tWR:3clks, tRCD:3clks, tRC:9clks
-#DATA 4 0x83FD900C 0x101564a8
-
-#hynix mDDR
-# ESDCFG0: tRFC:17clks, tXSR:21clks, tXP:3clks, tWTR:1clk, tRP:3clks, tMRD:2clks
-# tRAS:7clks, tRRD:2clks, tWR:3clks, tRCD:3clks, tRC:9clks
+/*
+ * ESDCFG1: tRFC:22clks, tXSR:28clks, tXP:2clks, tWTR:2clk, tRP:3clks, tMRD:2clks
+ * tRAS:8clks, tRRD:2clks, tWR:3clks, tRCD:3clks, tRC:11clks
+ * DATA 4 0x83fd900c 0xC33574AA
+ */
+/*
+ * micron mDDR
+ * ESDCFG1: tRFC:11clks, tXSR:19clks, tXP:1clks, tWTR:2clk, tRP:3clks, tMRD:2clks
+ * tRAS:7clks, tRRD:2clks, tWR:3clks, tRCD:3clks, tRC:9clks
+ * DATA 4 0x83FD900C 0x101564a8
+ */
+/*
+ * hynix mDDR
+ * ESDCFG0: tRFC:17clks, tXSR:21clks, tXP:3clks, tWTR:1clk, tRP:3clks, tMRD:2clks
+ * tRAS:7clks, tRRD:2clks, tWR:3clks, tRCD:3clks, tRC:9clks
+ */
DATA 4 0x83FD900C 0x704564a8
-# ESDSCR (mDRAM configuration finished)
+/* ESDSCR (mDRAM configuration finished) */
DATA 4 0x83FD9014 0x00000004
-# ESDSCR - clear "configuration request" bit
+/* ESDSCR - clear "configuration request" bit */
DATA 4 0x83fd9014 0x00000000
diff --git a/board/woodburn/imximage.cfg b/board/woodburn/imximage.cfg
index b4cc8ecf63..ba42a5e7d5 100644
--- a/board/woodburn/imximage.cfg
+++ b/board/woodburn/imximage.cfg
@@ -1,4 +1,4 @@
BOOT_FROM sd
-# DDR2 init
+/* DDR2 init */
DATA 4 0xB8001010 0x00000304
diff --git a/spl/Makefile b/spl/Makefile
index 6dbb1055b6..d8efad0290 100644
--- a/spl/Makefile
+++ b/spl/Makefile
@@ -141,11 +141,8 @@ $(OBJTREE)/MLO.byteswap: $(obj)u-boot-spl.bin
$(OBJTREE)/tools/mkimage -T omapimage -n byteswap \
-a $(CONFIG_SPL_TEXT_BASE) -d $< $@
-ifneq ($(CONFIG_IMX_CONFIG),)
-$(OBJTREE)/SPL: $(obj)u-boot-spl.bin
- $(OBJTREE)/tools/mkimage -n $(SRCTREE)/$(CONFIG_IMX_CONFIG) -T imximage \
- -e $(CONFIG_SPL_TEXT_BASE) -d $< $@
-endif
+$(OBJTREE)/SPL : $(obj)u-boot-spl.bin depend
+ $(MAKE) -C $(SRCTREE)/arch/arm/imx-common $@
ALL-y += $(obj)u-boot-spl.bin
OpenPOWER on IntegriCloud