Merge branch 'u-boot-samsung/master' into 'u-boot-arm/master'

Conflicts:
	tools/Makefile

20 files changed, 766 insertions, 45 deletions

diff --git a/MAINTAINERS b/MAINTAINERS
index 0807727703..86a5ce402e 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -464,6 +464,10 @@ Andre Schwarz <andre.schwarz@matrix-vision.de>
 	mvblm7		MPC8343
 	mvsmr		MPC5200
 
+Inderpal Singh <inderpal.singh@linaro.org>
+
+	Arndale		ARM ARMV7 (EXYNOS5250 SoC)
+
 Jon Smirl <jonsmirl@gmail.com>
 
 	pcm030		MPC5200
diff --git a/Makefile b/Makefile
index ed48279acd..5de84b6474 100644
--- a/Makefile
+++ b/Makefile
@@ -866,7 +866,7 @@ clean:
 	       $(obj)tools/gdb/{astest,gdbcont,gdbsend}			  \
 	       $(obj)tools/gen_eth_addr    $(obj)tools/img2srec		  \
 	       $(obj)tools/mk{env,}image   $(obj)tools/mpc86x_clk	  \
-	       $(obj)tools/mk{smdk5250,}spl				  \
+	       $(obj)tools/mk{$(BOARD),}spl				  \
 	       $(obj)tools/mxsboot					  \
 	       $(obj)tools/ncb		   $(obj)tools/ubsha1		  \
 	       $(obj)tools/kernel-doc/docproc				  \
diff --git a/arch/arm/include/asm/arch-exynos/gpio.h b/arch/arm/include/asm/arch-exynos/gpio.h
index e955811262..a1a74393d0 100644
--- a/arch/arm/include/asm/arch-exynos/gpio.h
+++ b/arch/arm/include/asm/arch-exynos/gpio.h
@@ -290,10 +290,19 @@ static inline unsigned int s5p_gpio_part_max(int nr)
 			return EXYNOS5_GPIO_PART2_MAX;
 
 	} else if (cpu_is_exynos4()) {
-		if (nr < EXYNOS4_GPIO_PART1_MAX)
-			return 0;
-		else
-			return EXYNOS4_GPIO_PART1_MAX;
+		if (proid_is_exynos4412()) {
+			if (nr < EXYNOS4X12_GPIO_PART1_MAX)
+				return 0;
+			else if (nr < EXYNOS4X12_GPIO_PART2_MAX)
+				return EXYNOS4X12_GPIO_PART1_MAX;
+			else
+				return EXYNOS4X12_GPIO_PART2_MAX;
+		} else {
+			if (nr < EXYNOS4_GPIO_PART1_MAX)
+				return 0;
+			else
+				return EXYNOS4_GPIO_PART1_MAX;
+		}
 	}
 
 	return 0;
diff --git a/arch/arm/include/asm/arch-exynos/mmc.h b/arch/arm/include/asm/arch-exynos/mmc.h
index 96610b88f4..98312d1c3c 100644
--- a/arch/arm/include/asm/arch-exynos/mmc.h
+++ b/arch/arm/include/asm/arch-exynos/mmc.h
@@ -8,6 +8,8 @@
 #ifndef __ASM_ARCH_MMC_H_
 #define __ASM_ARCH_MMC_H_
 
+#define S5P_MMC_DEV_OFFSET	0x10000
+
 #define SDHCI_CONTROL2		0x80
 #define SDHCI_CONTROL3		0x84
 #define SDHCI_CONTROL4		0x8C
@@ -55,7 +57,9 @@ int s5p_sdhci_init(u32 regbase, int index, int bus_width);
 
 static inline unsigned int s5p_mmc_init(int index, int bus_width)
 {
-	unsigned int base = samsung_get_base_mmc() + (0x10000 * index);
+	unsigned int base = samsung_get_base_mmc() +
+				(S5P_MMC_DEV_OFFSET * index);
+
 	return s5p_sdhci_init(base, index, bus_width);
 }
 #endif
diff --git a/arch/arm/include/asm/arch-s5pc1xx/mmc.h b/arch/arm/include/asm/arch-s5pc1xx/mmc.h
index 96610b88f4..55ff10b23c 100644
--- a/arch/arm/include/asm/arch-s5pc1xx/mmc.h
+++ b/arch/arm/include/asm/arch-s5pc1xx/mmc.h
@@ -8,6 +8,8 @@
 #ifndef __ASM_ARCH_MMC_H_
 #define __ASM_ARCH_MMC_H_
 
+#define S5P_MMC_DEV_OFFSET	0x100000
+
 #define SDHCI_CONTROL2		0x80
 #define SDHCI_CONTROL3		0x84
 #define SDHCI_CONTROL4		0x8C
@@ -55,7 +57,9 @@ int s5p_sdhci_init(u32 regbase, int index, int bus_width);
 
 static inline unsigned int s5p_mmc_init(int index, int bus_width)
 {
-	unsigned int base = samsung_get_base_mmc() + (0x10000 * index);
+	unsigned int base = samsung_get_base_mmc() +
+				 (S5P_MMC_DEV_OFFSET * index);
+
 	return s5p_sdhci_init(base, index, bus_width);
 }
 #endif
diff --git a/board/samsung/arndale/Makefile b/board/samsung/arndale/Makefile
new file mode 100644
index 0000000000..afd8db3cee
--- /dev/null
+++ b/board/samsung/arndale/Makefile
@@ -0,0 +1,34 @@
+#
+# Copyright (C) 2013 Samsung Electronics
+#
+# SPDX-License-Identifier:	GPL-2.0+
+#
+
+include $(TOPDIR)/config.mk
+
+LIB	= $(obj)lib$(BOARD).o
+
+COBJS	+= arndale_spl.o
+
+ifndef CONFIG_SPL_BUILD
+COBJS	+= arndale.o
+endif
+
+SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS	:= $(addprefix $(obj),$(COBJS) $(SOBJS))
+
+ALL	:=	 $(obj).depend $(LIB)
+
+all:	$(ALL)
+
+$(LIB):	$(OBJS)
+	$(call cmd_link_o_target, $(OBJS))
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
diff --git a/board/samsung/arndale/arndale.c b/board/samsung/arndale/arndale.c
new file mode 100644
index 0000000000..052fecdd5b
--- /dev/null
+++ b/board/samsung/arndale/arndale.c
@@ -0,0 +1,101 @@
+/*
+ * Copyright (C) 2013 Samsung Electronics
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#include <common.h>
+#include <asm/arch/pinmux.h>
+#include <asm/arch/dwmmc.h>
+#include <asm/arch/power.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+int board_init(void)
+{
+	gd->bd->bi_boot_params = (PHYS_SDRAM_1 + 0x100UL);
+	return 0;
+}
+
+int dram_init(void)
+{
+	int i;
+	u32 addr;
+
+	for (i = 0; i < CONFIG_NR_DRAM_BANKS; i++) {
+		addr = CONFIG_SYS_SDRAM_BASE + (i * SDRAM_BANK_SIZE);
+		gd->ram_size += get_ram_size((long *)addr, SDRAM_BANK_SIZE);
+	}
+	return 0;
+}
+
+int power_init_board(void)
+{
+	set_ps_hold_ctrl();
+	return 0;
+}
+
+void dram_init_banksize(void)
+{
+	int i;
+	u32 addr, size;
+
+	for (i = 0; i < CONFIG_NR_DRAM_BANKS; i++) {
+		addr = CONFIG_SYS_SDRAM_BASE + (i * SDRAM_BANK_SIZE);
+		size = get_ram_size((long *)addr, SDRAM_BANK_SIZE);
+
+		gd->bd->bi_dram[i].start = addr;
+		gd->bd->bi_dram[i].size = size;
+	}
+}
+
+#ifdef CONFIG_GENERIC_MMC
+int board_mmc_init(bd_t *bis)
+{
+	int ret;
+	/* dwmmc initializattion for available channels */
+	ret = exynos_dwmmc_init(gd->fdt_blob);
+	if (ret)
+		debug("dwmmc init failed\n");
+
+	return ret;
+}
+#endif
+
+static int board_uart_init(void)
+{
+	int err = 0, uart_id;
+
+	for (uart_id = PERIPH_ID_UART0; uart_id <= PERIPH_ID_UART3; uart_id++) {
+		err = exynos_pinmux_config(uart_id, PINMUX_FLAG_NONE);
+		if (err) {
+			debug("UART%d not configured\n",
+			      (uart_id - PERIPH_ID_UART0));
+			return err;
+		}
+	}
+	return err;
+}
+
+#ifdef CONFIG_BOARD_EARLY_INIT_F
+int board_early_init_f(void)
+{
+	int err;
+
+	err = board_uart_init();
+	if (err) {
+		debug("UART init failed\n");
+		return err;
+	}
+	return err;
+}
+#endif
+
+#ifdef CONFIG_DISPLAY_BOARDINFO
+int checkboard(void)
+{
+	printf("\nBoard: Arndale\n");
+
+	return 0;
+}
+#endif
diff --git a/board/samsung/arndale/arndale_spl.c b/board/samsung/arndale/arndale_spl.c
new file mode 100644
index 0000000000..2949c0828d
--- /dev/null
+++ b/board/samsung/arndale/arndale_spl.c
@@ -0,0 +1,50 @@
+/*
+ * Copyright (c) 2012 The Chromium OS Authors.
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#include <common.h>
+#include <asm/arch/spl.h>
+
+#define SIGNATURE	0xdeadbeef
+
+/* Parameters of early board initialization in SPL */
+static struct spl_machine_param machine_param
+		__attribute__((section(".machine_param"))) = {
+	.signature	= SIGNATURE,
+	.version	= 1,
+	.params		= "vmubfasirM",
+	.size		= sizeof(machine_param),
+
+	.mem_iv_size	= 0x1f,
+	.mem_type	= DDR_MODE_DDR3,
+
+	/*
+	 * Set uboot_size to 0x100000 bytes.
+	 *
+	 * This is an overly conservative value chosen to accommodate all
+	 * possible U-Boot image.  You are advised to set this value to a
+	 * smaller realistic size via scripts that modifies the .machine_param
+	 * section of output U-Boot image.
+	 */
+	.uboot_size	= 0x100000,
+
+	.boot_source	= BOOT_MODE_OM,
+	.frequency_mhz	= 800,
+	.arm_freq_mhz	= 1000,
+	.serial_base	= 0x12c30000,
+	.i2c_base	= 0x12c60000,
+	.mem_manuf	= MEM_MANUF_SAMSUNG,
+};
+
+struct spl_machine_param *spl_get_machine_params(void)
+{
+	if (machine_param.signature != SIGNATURE) {
+		/* Will hang if SIGNATURE dont match */
+		while (1)
+			;
+	}
+
+	return &machine_param;
+}
diff --git a/board/samsung/dts/exynos5250-arndale.dts b/board/samsung/dts/exynos5250-arndale.dts
new file mode 100644
index 0000000000..202f2ea6ed
--- /dev/null
+++ b/board/samsung/dts/exynos5250-arndale.dts
@@ -0,0 +1,39 @@
+/*
+ * SAMSUNG Arndale board device tree source
+ *
+ * Copyright (c) 2013 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+*/
+
+/dts-v1/;
+#include "exynos5250.dtsi"
+
+/ {
+	model = "SAMSUNG Arndale board based on EXYNOS5250";
+	compatible = "samsung,arndale", "samsung,exynos5250";
+
+	aliases {
+		serial0 = "/serial@12C20000";
+		console = "/serial@12C20000";
+	};
+
+	mmc@12200000 {
+		samsung,bus-width = <8>;
+		samsung,timing = <1 3 3>;
+	};
+
+	mmc@12210000 {
+		status = "disabled";
+	};
+
+	mmc@12220000 {
+		samsung,bus-width = <4>;
+		samsung,timing = <1 2 3>;
+	};
+
+	mmc@12230000 {
+		status = "disabled";
+	};
+};
diff --git a/board/samsung/goni/config.mk b/board/samsung/goni/config.mk
deleted file mode 100644
index e1cadbceed..0000000000
--- a/board/samsung/goni/config.mk
+++ /dev/null
@@ -1,18 +0,0 @@
-#
-# Copyright (C) 2010 Samsung Electronics
-# Kyungmin Park <kyungmin.park@samsung.com>
-#
-# SPDX-License-Identifier:	GPL-2.0+
-#
-
-# On S5PC100 we use the 128 MiB OneDRAM bank at
-#
-# 0x30000000 to 0x35000000 (80MiB)
-# 0x38000000 to 0x40000000 (128MiB)
-#
-# On S5PC110 we use the 128 MiB OneDRAM bank at
-#
-# 0x30000000 to 0x35000000 (80MiB)
-# 0x40000000 to 0x50000000 (256MiB)
-#
-CONFIG_SYS_TEXT_BASE = 0x34800000
diff --git a/board/samsung/goni/goni.c b/board/samsung/goni/goni.c
index 5b3d6ef853..366f648d32 100644
--- a/board/samsung/goni/goni.c
+++ b/board/samsung/goni/goni.c
@@ -72,7 +72,7 @@ int checkboard(void)
 #ifdef CONFIG_GENERIC_MMC
 int board_mmc_init(bd_t *bis)
 {
-	int i;
+	int i, ret, ret_sd = 0;
 
 	/* MASSMEMORY_EN: XMSMDATA7: GPJ2[7] output high */
 	s5p_gpio_direction_output(&s5pc110_gpio->j2, 7, 1);
@@ -95,7 +95,36 @@ int board_mmc_init(bd_t *bis)
 		s5p_gpio_set_drv(&s5pc110_gpio->g0, i, GPIO_DRV_4X);
 	}
 
-	return s5p_mmc_init(0, 4);
+	ret = s5p_mmc_init(0, 4);
+	if (ret)
+		error("MMC: Failed to init MMC:0.\n");
+
+	/*
+	 * SD card (T_FLASH) detect and init
+	 * T_FLASH_DETECT: EINT28: GPH3[4] input mode
+	 */
+	s5p_gpio_cfg_pin(&s5pc110_gpio->h3, 4, GPIO_INPUT);
+	s5p_gpio_set_pull(&s5pc110_gpio->h3, 4, GPIO_PULL_UP);
+
+	if (!s5p_gpio_get_value(&s5pc110_gpio->h3, 4)) {
+		for (i = 0; i < 7; i++) {
+			if (i == 2)
+				continue;
+
+			/* GPG2[0:6] special function 2 */
+			s5p_gpio_cfg_pin(&s5pc110_gpio->g2, i, 0x2);
+			/* GPG2[0:6] pull disable */
+			s5p_gpio_set_pull(&s5pc110_gpio->g2, i, GPIO_PULL_NONE);
+			/* GPG2[0:6] drv 4x */
+			s5p_gpio_set_drv(&s5pc110_gpio->g2, i, GPIO_DRV_4X);
+		}
+
+		ret_sd = s5p_mmc_init(2, 4);
+		if (ret_sd)
+			error("MMC: Failed to init SD card (MMC:2).\n");
+	}
+
+	return ret & ret_sd;
 }
 #endif
 
diff --git a/board/samsung/smdkc100/config.mk b/board/samsung/smdkc100/config.mk
deleted file mode 100644
index 3a08bb17a5..0000000000
--- a/board/samsung/smdkc100/config.mk
+++ /dev/null
@@ -1,16 +0,0 @@
-#
-# Copyright (C) 2008 # Samsung Elecgtronics
-# Kyungmin Park <kyungmin.park@samsung.com>
-#
-
-# On S5PC100 we use the 128 MiB OneDRAM bank at
-#
-# 0x30000000 to 0x35000000 (80MiB)
-# 0x38000000 to 0x40000000 (128MiB)
-#
-# On S5PC110 we use the 128 MiB OneDRAM bank at
-#
-# 0x30000000 to 0x35000000 (80MiB)
-# 0x40000000 to 0x48000000 (128MiB)
-#
-CONFIG_SYS_TEXT_BASE = 0x34800000
diff --git a/boards.cfg b/boards.cfg
index 48aa0bf102..b4297e568d 100644
--- a/boards.cfg
+++ b/boards.cfg
@@ -327,6 +327,7 @@ omap5_uevm                   arm         armv7       omap5_uevm          ti		oma
 dra7xx_evm		     arm	 armv7	     dra7xx		 ti	        omap5
 s5p_goni                     arm         armv7       goni                samsung        s5pc1xx
 smdkc100                     arm         armv7       smdkc100            samsung        s5pc1xx
+arndale		     	     arm	 armv7	     arndale		 samsung	exynos
 origen			     arm	 armv7	     origen		 samsung	exynos
 s5pc210_universal            arm         armv7       universal_c210      samsung        exynos
 snow			     arm	 armv7	     smdk5250		 samsung	exynos
diff --git a/drivers/power/pmic/pmic_max77686.c b/drivers/power/pmic/pmic_max77686.c
index 7208e5b679..d4c430e22e 100644
--- a/drivers/power/pmic/pmic_max77686.c
+++ b/drivers/power/pmic/pmic_max77686.c
@@ -14,6 +14,198 @@
 
 DECLARE_GLOBAL_DATA_PTR;
 
+static const char max77686_buck_addr[] = {
+	0xff, 0x10, 0x12, 0x1c, 0x26, 0x30, 0x32, 0x34, 0x36, 0x38
+};
+
+static unsigned int max77686_ldo_volt2hex(int ldo, ulong uV)
+{
+	unsigned int hex = 0;
+
+	switch (ldo) {
+	case 1:
+	case 2:
+	case 6:
+	case 7:
+	case 8:
+	case 15:
+		hex = (uV - 800000) / 25000;
+		break;
+	default:
+		hex = (uV - 800000) / 50000;
+	}
+
+	if (hex >= 0 && hex <= MAX77686_LDO_VOLT_MAX_HEX)
+		return hex;
+
+	debug("%s: %ld is wrong voltage value for LDO%d\n", __func__, uV, ldo);
+	return 0;
+}
+
+int max77686_set_ldo_voltage(struct pmic *p, int ldo, ulong uV)
+{
+	unsigned int val, ret, hex, adr;
+
+	if (ldo < 1 && ldo > 26) {
+		printf("%s: %d is wrong ldo number\n", __func__, ldo);
+		return -1;
+	}
+
+	adr = MAX77686_REG_PMIC_LDO1CTRL1 + ldo - 1;
+	hex = max77686_ldo_volt2hex(ldo, uV);
+
+	if (!hex)
+		return -1;
+
+	ret = pmic_reg_read(p, adr, &val);
+	if (ret)
+		return ret;
+
+	val &= ~MAX77686_LDO_VOLT_MASK;
+	val |= hex;
+	ret |= pmic_reg_write(p, adr, val);
+
+	return ret;
+}
+
+int max77686_set_ldo_mode(struct pmic *p, int ldo, char opmode)
+{
+	unsigned int val, ret, adr, mode;
+
+	if (ldo < 1 && 26 < ldo) {
+		printf("%s: %d is wrong ldo number\n", __func__, ldo);
+		return -1;
+	}
+
+	adr = MAX77686_REG_PMIC_LDO1CTRL1 + ldo - 1;
+
+	/* mode */
+	switch (opmode) {
+	case OPMODE_OFF:
+		mode = MAX77686_LDO_MODE_OFF;
+		break;
+	case OPMODE_STANDBY:
+		switch (ldo) {
+		case 2:
+		case 6:
+		case 7:
+		case 8:
+		case 10:
+		case 11:
+		case 12:
+		case 14:
+		case 15:
+		case 16:
+			mode = MAX77686_LDO_MODE_STANDBY;
+			break;
+		default:
+			mode = 0xff;
+		}
+		break;
+	case OPMODE_LPM:
+		mode = MAX77686_LDO_MODE_LPM;
+		break;
+	case OPMODE_ON:
+		mode = MAX77686_LDO_MODE_ON;
+		break;
+	default:
+		mode = 0xff;
+	}
+
+	if (mode == 0xff) {
+		printf("%s: %d is not supported on LDO%d\n",
+		       __func__, opmode, ldo);
+		return -1;
+	}
+
+	ret = pmic_reg_read(p, adr, &val);
+	if (ret)
+		return ret;
+
+	val &= ~MAX77686_LDO_MODE_MASK;
+	val |= mode;
+	ret |= pmic_reg_write(p, adr, val);
+
+	return ret;
+}
+
+int max77686_set_buck_mode(struct pmic *p, int buck, char opmode)
+{
+	unsigned int val, ret, mask, adr, size, mode, mode_shift;
+
+	size = ARRAY_SIZE(max77686_buck_addr);
+	if (buck >= size) {
+		printf("%s: %d is wrong buck number\n", __func__, buck);
+		return -1;
+	}
+
+	adr = max77686_buck_addr[buck];
+
+	/* mask */
+	switch (buck) {
+	case 2:
+	case 3:
+	case 4:
+		mode_shift = MAX77686_BUCK_MODE_SHIFT_2;
+		break;
+	default:
+		mode_shift = MAX77686_BUCK_MODE_SHIFT_1;
+	}
+
+	mask = MAX77686_BUCK_MODE_MASK << mode_shift;
+
+	/* mode */
+	switch (opmode) {
+	case OPMODE_OFF:
+		mode = MAX77686_BUCK_MODE_OFF;
+		break;
+	case OPMODE_STANDBY:
+		switch (buck) {
+		case 1:
+		case 2:
+		case 3:
+		case 4:
+			mode = MAX77686_BUCK_MODE_STANDBY << mode_shift;
+			break;
+		default:
+			mode = 0xff;
+		}
+		break;
+	case OPMODE_LPM:
+		switch (buck) {
+		case 2:
+		case 3:
+		case 4:
+			mode = MAX77686_BUCK_MODE_LPM << mode_shift;
+			break;
+		default:
+			mode = 0xff;
+		}
+		break;
+	case OPMODE_ON:
+		mode = MAX77686_BUCK_MODE_ON << mode_shift;
+		break;
+	default:
+		mode = 0xff;
+	}
+
+	if (mode == 0xff) {
+		printf("%s: %d is not supported on BUCK%d\n",
+		       __func__, opmode, buck);
+		return -1;
+	}
+
+	ret = pmic_reg_read(p, adr, &val);
+	if (ret)
+		return ret;
+
+	val &= ~mask;
+	val |= mode;
+	ret |= pmic_reg_write(p, adr, val);
+
+	return ret;
+}
+
 int pmic_init(unsigned char bus)
 {
 	static const char name[] = "MAX77686_PMIC";
diff --git a/include/configs/arndale.h b/include/configs/arndale.h
new file mode 100644
index 0000000000..ed44a0424c
--- /dev/null
+++ b/include/configs/arndale.h
@@ -0,0 +1,255 @@
+/*
+ * Copyright (C) 2013 Samsung Electronics
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ *
+ * Configuration settings for the SAMSUNG Arndale board.
+ */
+
+#ifndef __CONFIG_ARNDALE_H
+#define __CONFIG_ARNDALE_H
+
+/* High Level Configuration Options */
+#define CONFIG_SAMSUNG			/* in a SAMSUNG core */
+#define CONFIG_S5P			/* S5P Family */
+#define CONFIG_EXYNOS5			/* which is in a Exynos5 Family */
+#define CONFIG_EXYNOS5250
+
+#include <asm/arch/cpu.h>		/* get chip and board defs */
+
+#define CONFIG_SYS_GENERIC_BOARD
+#define CONFIG_ARCH_CPU_INIT
+#define CONFIG_DISPLAY_CPUINFO
+#define CONFIG_DISPLAY_BOARDINFO
+
+/* Enable fdt support for Exynos5250 */
+#define CONFIG_ARCH_DEVICE_TREE		exynos5250
+#define CONFIG_OF_CONTROL
+#define CONFIG_OF_SEPARATE
+
+/* Allow tracing to be enabled */
+#define CONFIG_TRACE
+#define CONFIG_CMD_TRACE
+#define CONFIG_TRACE_BUFFER_SIZE	(16 << 20)
+#define CONFIG_TRACE_EARLY_SIZE		(8 << 20)
+#define CONFIG_TRACE_EARLY
+#define CONFIG_TRACE_EARLY_ADDR		0x50000000
+
+/* Keep L2 Cache Disabled */
+#define CONFIG_SYS_DCACHE_OFF
+
+#define CONFIG_SYS_SDRAM_BASE		0x40000000
+#define CONFIG_SYS_TEXT_BASE		0x43E00000
+
+/* input clock of PLL: SMDK5250 has 24MHz input clock */
+#define CONFIG_SYS_CLK_FREQ		24000000
+
+#define CONFIG_SETUP_MEMORY_TAGS
+#define CONFIG_CMDLINE_TAG
+#define CONFIG_INITRD_TAG
+#define CONFIG_CMDLINE_EDITING
+
+/* Power Down Modes */
+#define S5P_CHECK_SLEEP			0x00000BAD
+#define S5P_CHECK_DIDLE			0xBAD00000
+#define S5P_CHECK_LPA			0xABAD0000
+
+/* Offset for inform registers */
+#define INFORM0_OFFSET			0x800
+#define INFORM1_OFFSET			0x804
+
+/* Size of malloc() pool */
+#define CONFIG_SYS_MALLOC_LEN		(CONFIG_ENV_SIZE + (4 << 20))
+
+/* select serial console configuration */
+#define CONFIG_BAUDRATE			115200
+#define EXYNOS5_DEFAULT_UART_OFFSET	0x010000
+#define CONFIG_SILENT_CONSOLE
+
+/* Console configuration */
+#define CONFIG_CONSOLE_MUX
+#define CONFIG_SYS_CONSOLE_IS_IN_ENV
+#define EXYNOS_DEVICE_SETTINGS \
+		"stdin=serial\0" \
+		"stdout=serial\0" \
+		"stderr=serial\0"
+
+#define CONFIG_EXTRA_ENV_SETTINGS \
+	EXYNOS_DEVICE_SETTINGS
+
+/* SD/MMC configuration */
+#define CONFIG_GENERIC_MMC
+#define CONFIG_MMC
+#define CONFIG_SDHCI
+#define CONFIG_S5P_SDHCI
+#define CONFIG_DWMMC
+#define CONFIG_EXYNOS_DWMMC
+#define CONFIG_SUPPORT_EMMC_BOOT
+
+
+#define CONFIG_BOARD_EARLY_INIT_F
+#define CONFIG_SKIP_LOWLEVEL_INIT
+
+/* PWM */
+#define CONFIG_PWM
+
+/* allow to overwrite serial and ethaddr */
+#define CONFIG_ENV_OVERWRITE
+
+/* Command definition*/
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_ELF
+#define CONFIG_CMD_MMC
+#define CONFIG_CMD_EXT2
+#define CONFIG_CMD_FAT
+#define CONFIG_CMD_NET
+#define CONFIG_CMD_HASH
+
+#define CONFIG_BOOTDELAY		3
+#define CONFIG_ZERO_BOOTDELAY_CHECK
+
+/* USB */
+#define CONFIG_CMD_USB
+#define CONFIG_USB_EHCI
+#define CONFIG_USB_EHCI_EXYNOS
+#define CONFIG_USB_STORAGE
+
+/* MMC SPL */
+#define CONFIG_SPL
+#define COPY_BL2_FNPTR_ADDR	0x02020030
+
+#define CONFIG_SPL_LIBCOMMON_SUPPORT
+
+/* specific .lds file */
+#define CONFIG_SPL_LDSCRIPT	"board/samsung/common/exynos-uboot-spl.lds"
+#define CONFIG_SPL_TEXT_BASE	0x02023400
+#define CONFIG_SPL_MAX_FOOTPRINT	(14 * 1024)
+
+#define CONFIG_BOOTCOMMAND	"mmc read 40007000 451 2000; bootm 40007000"
+
+/* Miscellaneous configurable options */
+#define CONFIG_SYS_LONGHELP		/* undef to save memory */
+#define CONFIG_SYS_HUSH_PARSER		/* use "hush" command parser	*/
+#define CONFIG_SYS_PROMPT		"ARNDALE # "
+#define CONFIG_SYS_CBSIZE		256	/* Console I/O Buffer Size */
+#define CONFIG_SYS_PBSIZE		384	/* Print Buffer Size */
+#define CONFIG_SYS_MAXARGS		16	/* max number of command args */
+#define CONFIG_DEFAULT_CONSOLE		"console=ttySAC2,115200n8\0"
+/* Boot Argument Buffer Size */
+#define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE
+/* memtest works on */
+#define CONFIG_SYS_MEMTEST_START	CONFIG_SYS_SDRAM_BASE
+#define CONFIG_SYS_MEMTEST_END		(CONFIG_SYS_SDRAM_BASE + 0x5E00000)
+#define CONFIG_SYS_LOAD_ADDR		(CONFIG_SYS_SDRAM_BASE + 0x3E00000)
+
+#define CONFIG_SYS_HZ			1000
+
+#define CONFIG_RD_LVL
+
+#define CONFIG_NR_DRAM_BANKS	8
+#define SDRAM_BANK_SIZE		(256UL << 20UL)	/* 256 MB */
+#define PHYS_SDRAM_1		CONFIG_SYS_SDRAM_BASE
+#define PHYS_SDRAM_1_SIZE	SDRAM_BANK_SIZE
+#define PHYS_SDRAM_2		(CONFIG_SYS_SDRAM_BASE + SDRAM_BANK_SIZE)
+#define PHYS_SDRAM_2_SIZE	SDRAM_BANK_SIZE
+#define PHYS_SDRAM_3		(CONFIG_SYS_SDRAM_BASE + (2 * SDRAM_BANK_SIZE))
+#define PHYS_SDRAM_3_SIZE	SDRAM_BANK_SIZE
+#define PHYS_SDRAM_4		(CONFIG_SYS_SDRAM_BASE + (3 * SDRAM_BANK_SIZE))
+#define PHYS_SDRAM_4_SIZE	SDRAM_BANK_SIZE
+#define PHYS_SDRAM_5		(CONFIG_SYS_SDRAM_BASE + (4 * SDRAM_BANK_SIZE))
+#define PHYS_SDRAM_5_SIZE	SDRAM_BANK_SIZE
+#define PHYS_SDRAM_6		(CONFIG_SYS_SDRAM_BASE + (5 * SDRAM_BANK_SIZE))
+#define PHYS_SDRAM_6_SIZE	SDRAM_BANK_SIZE
+#define PHYS_SDRAM_7		(CONFIG_SYS_SDRAM_BASE + (6 * SDRAM_BANK_SIZE))
+#define PHYS_SDRAM_7_SIZE	SDRAM_BANK_SIZE
+#define PHYS_SDRAM_8		(CONFIG_SYS_SDRAM_BASE + (7 * SDRAM_BANK_SIZE))
+#define PHYS_SDRAM_8_SIZE	SDRAM_BANK_SIZE
+
+#define CONFIG_SYS_MONITOR_BASE	0x00000000
+
+/* FLASH and environment organization */
+#define CONFIG_SYS_NO_FLASH
+#undef CONFIG_CMD_IMLS
+#define CONFIG_IDENT_STRING		" for ARNDALE"
+
+#define CONFIG_SYS_MMC_ENV_DEV		0
+
+#define CONFIG_ENV_IS_IN_MMC
+#define CONFIG_SECURE_BL1_ONLY
+
+/* Secure FW size configuration */
+#ifdef	CONFIG_SECURE_BL1_ONLY
+#define	CONFIG_SEC_FW_SIZE		(8 << 10)	/* 8KB */
+#else
+#define	CONFIG_SEC_FW_SIZE		0
+#endif
+
+/* Configuration of BL1, BL2, ENV Blocks on mmc */
+#define CONFIG_RES_BLOCK_SIZE	(512)
+#define CONFIG_BL1_SIZE		(16 << 10) /*16 K reserved for BL1*/
+#define	CONFIG_BL2_SIZE		(512UL << 10UL)	/* 512 KB */
+#define CONFIG_ENV_SIZE		(16 << 10)	/* 16 KB */
+
+#define CONFIG_BL1_OFFSET	(CONFIG_RES_BLOCK_SIZE + CONFIG_SEC_FW_SIZE)
+#define CONFIG_BL2_OFFSET	(CONFIG_BL1_OFFSET + CONFIG_BL1_SIZE)
+#define CONFIG_ENV_OFFSET	(CONFIG_BL2_OFFSET + CONFIG_BL2_SIZE)
+
+/* U-boot copy size from boot Media to DRAM.*/
+#define BL2_START_OFFSET	(CONFIG_BL2_OFFSET/512)
+#define BL2_SIZE_BLOC_COUNT	(CONFIG_BL2_SIZE/512)
+
+#define CONFIG_SPI_BOOTING
+#define EXYNOS_COPY_SPI_FNPTR_ADDR	0x02020058
+#define SPI_FLASH_UBOOT_POS		(CONFIG_SEC_FW_SIZE + CONFIG_BL1_SIZE)
+
+#define CONFIG_DOS_PARTITION
+#define CONFIG_EFI_PARTITION
+#define CONFIG_CMD_PART
+#define CONFIG_PARTITION_UUIDS
+
+
+#define CONFIG_IRAM_STACK	0x02050000
+
+#define CONFIG_SYS_INIT_SP_ADDR	CONFIG_IRAM_STACK
+
+/* I2C */
+#define CONFIG_SYS_I2C_INIT_BOARD
+#define CONFIG_HARD_I2C
+#define CONFIG_CMD_I2C
+#define CONFIG_SYS_I2C_SPEED	100000		/* 100 Kbps */
+#define CONFIG_DRIVER_S3C24X0_I2C
+#define CONFIG_I2C_MULTI_BUS
+#define CONFIG_MAX_I2C_NUM	8
+#define CONFIG_SYS_I2C_SLAVE    0x0
+#define CONFIG_I2C_EDID
+
+/* PMIC */
+#define CONFIG_PMIC
+#define CONFIG_PMIC_I2C
+#define CONFIG_PMIC_MAX77686
+
+#define CONFIG_DEFAULT_DEVICE_TREE	exynos5250-arndale
+
+/* Ethernet Controllor Driver */
+#ifdef CONFIG_CMD_NET
+#define CONFIG_SMC911X
+#define CONFIG_SMC911X_BASE		0x5000000
+#define CONFIG_SMC911X_16_BIT
+#define CONFIG_ENV_SROM_BANK		1
+#endif /*CONFIG_CMD_NET*/
+
+/* Enable PXE Support */
+#ifdef CONFIG_CMD_NET
+#define CONFIG_CMD_PXE
+#define CONFIG_MENU
+#endif
+
+/* Enable devicetree support */
+#define CONFIG_OF_LIBFDT
+
+/* Enable Time Command */
+#define CONFIG_CMD_TIME
+
+#endif	/* __CONFIG_H */
diff --git a/include/configs/exynos5250-dt.h b/include/configs/exynos5250-dt.h
index 8f8f85f440..8c21909d63 100644
--- a/include/configs/exynos5250-dt.h
+++ b/include/configs/exynos5250-dt.h
@@ -13,7 +13,7 @@
 #define CONFIG_SAMSUNG			/* in a SAMSUNG core */
 #define CONFIG_S5P			/* S5P Family */
 #define CONFIG_EXYNOS5			/* which is in a Exynos5 Family */
-#define CONFIG_SMDK5250			/* which is in a SMDK5250 */
+#define CONFIG_EXYNOS5250
 
 #include <asm/arch/cpu.h>		/* get chip and board defs */
 
diff --git a/include/configs/s5p_goni.h b/include/configs/s5p_goni.h
index d0fafd7136..c303244f98 100644
--- a/include/configs/s5p_goni.h
+++ b/include/configs/s5p_goni.h
@@ -29,6 +29,9 @@
 /* DRAM Base */
 #define CONFIG_SYS_SDRAM_BASE		0x30000000
 
+/* Text Base */
+#define CONFIG_SYS_TEXT_BASE		0x34800000
+
 #define CONFIG_SETUP_MEMORY_TAGS
 #define CONFIG_CMDLINE_TAG
 #define CONFIG_INITRD_TAG
diff --git a/include/configs/smdkc100.h b/include/configs/smdkc100.h
index a572e629da..507a5d309e 100644
--- a/include/configs/smdkc100.h
+++ b/include/configs/smdkc100.h
@@ -34,6 +34,9 @@
 /* DRAM Base */
 #define CONFIG_SYS_SDRAM_BASE		0x30000000
 
+/* Text Base */
+#define CONFIG_SYS_TEXT_BASE		0x34800000
+
 #define CONFIG_SETUP_MEMORY_TAGS
 #define CONFIG_CMDLINE_TAG
 #define CONFIG_INITRD_TAG
diff --git a/include/power/max77686_pmic.h b/include/power/max77686_pmic.h
index 91b7ba7bdb..c98db1b75d 100644
--- a/include/power/max77686_pmic.h
+++ b/include/power/max77686_pmic.h
@@ -139,6 +139,32 @@ enum {
 	EN_LDO = (0x3 << 6),
 };
 
+enum {
+	OPMODE_OFF = 0,
+	OPMODE_STANDBY,
+	OPMODE_LPM,
+	OPMODE_ON,
+};
+
+int max77686_set_ldo_voltage(struct pmic *p, int ldo, ulong uV);
+int max77686_set_ldo_mode(struct pmic *p, int ldo, char opmode);
+int max77686_set_buck_mode(struct pmic *p, int buck, char opmode);
+
+#define MAX77686_LDO_VOLT_MAX_HEX	0x3f
+#define MAX77686_LDO_VOLT_MASK		0x3f
+#define MAX77686_LDO_MODE_MASK		0xc0
+#define MAX77686_LDO_MODE_OFF		(0x00 << 0x06)
+#define MAX77686_LDO_MODE_STANDBY	(0x01 << 0x06)
+#define MAX77686_LDO_MODE_LPM		(0x02 << 0x06)
+#define MAX77686_LDO_MODE_ON		(0x03 << 0x06)
+#define MAX77686_BUCK_MODE_MASK		0x03
+#define MAX77686_BUCK_MODE_SHIFT_1	0x00
+#define MAX77686_BUCK_MODE_SHIFT_2	0x04
+#define MAX77686_BUCK_MODE_OFF		0x00
+#define MAX77686_BUCK_MODE_STANDBY	0x01
+#define MAX77686_BUCK_MODE_LPM		0x02
+#define MAX77686_BUCK_MODE_ON		0x03
+
 /* Buck1 1 volt value */
 #define MAX77686_BUCK1OUT_1V	0x5
 /* Buck1 1.05 volt value */
diff --git a/tools/Makefile b/tools/Makefile
index 0a29147847..c36cde2007 100644
--- a/tools/Makefile
+++ b/tools/Makefile
@@ -52,7 +52,7 @@ BIN_FILES-$(CONFIG_CMD_LOADS) += img2srec$(SFX)
 BIN_FILES-$(CONFIG_XWAY_SWAP_BYTES) += xway-swap-bytes$(SFX)
 BIN_FILES-y += mkenvimage$(SFX)
 BIN_FILES-y += mkimage$(SFX)
-BIN_FILES-$(CONFIG_SMDK5250) += mksmdk5250spl$(SFX)
+BIN_FILES-$(CONFIG_EXYNOS5250) += mk$(BOARD)spl$(SFX)
 BIN_FILES-$(CONFIG_MX23) += mxsboot$(SFX)
 BIN_FILES-$(CONFIG_MX28) += mxsboot$(SFX)
 BIN_FILES-$(CONFIG_NETCONSOLE) += ncb$(SFX)
@@ -87,6 +87,7 @@ NOPED_OBJ_FILES-y += ublimage.o
 OBJ_FILES-$(CONFIG_BUILD_ENVCRC) += envcrc.o
 OBJ_FILES-$(CONFIG_CMD_LOADS) += img2srec.o
 OBJ_FILES-$(CONFIG_CMD_NET) += gen_eth_addr.o
+OBJ_FILES-$(CONFIG_EXYNOS5250) += mkexynosspl.o
 OBJ_FILES-$(CONFIG_KIRKWOOD) += kwboot.o
 OBJ_FILES-$(CONFIG_LCD_LOGO) += bmp_logo.o
 OBJ_FILES-$(CONFIG_MX23) += mxsboot.o