Merge branch 'master' of git://git.denx.de/u-boot-arm

Conflicts: board/samsung/trats2/trats2.c include/configs/exynos5250-dt.h Signed-off-by: Tom Rini <trini@ti.com>
author: Tom Rini <trini@ti.com> 2013-12-10 17:15:18 -0500
committer: Tom Rini <trini@ti.com> 2013-12-10 17:15:18 -0500
commit: 4b210ad34282bfd9fc982a8e3c9a9126f4094cdb (patch)
tree: f91ebdc46ede952728602d5ecc18e64ad0e52682
parent: 65b7fe28a12bbaccc7a0c076f5f9f213150030e7 (diff)
parent: f15ea6e1d67782a1626d4a4922b6c20e380085e5 (diff)
download: talos-obmc-uboot-4b210ad34282bfd9fc982a8e3c9a9126f4094cdb.tar.gz
talos-obmc-uboot-4b210ad34282bfd9fc982a8e3c9a9126f4094cdb.zip
217 files changed, 12159 insertions, 2833 deletions
diff --git a/Makefile b/Makefile
index e693f7ffa2..7310c4ef0a 100644
--- a/Makefile
+++ b/Makefile
@@ -372,7 +372,7 @@ $(obj)u-boot.hex:	$(obj)u-boot
 		$(OBJCOPY) ${OBJCFLAGS} -O ihex $< $@
 
 $(obj)u-boot.srec:	$(obj)u-boot
-		$(OBJCOPY) -O srec $< $@
+		$(OBJCOPY) ${OBJCFLAGS} -O srec $< $@
 
 $(obj)u-boot.bin:	$(obj)u-boot
 		$(OBJCOPY) ${OBJCFLAGS} -O binary $< $@
diff --git a/README b/README
index 3c233db068..8f0b38cbf3 100644
--- a/README
+++ b/README
@@ -818,6 +818,22 @@ The following options need to be configured:
 		as a convenience, when switching between booting from
 		RAM and NFS.
 
+- Bootcount:
+		CONFIG_BOOTCOUNT_LIMIT
+		Implements a mechanism for detecting a repeating reboot
+		cycle, see:
+		http://www.denx.de/wiki/view/DULG/UBootBootCountLimit
+
+		CONFIG_BOOTCOUNT_ENV
+		If no softreset save registers are found on the hardware
+		"bootcount" is stored in the environment. To prevent a
+		saveenv on all reboots, the environment variable
+		"upgrade_available" is used. If "upgrade_available" is
+		0, "bootcount" is always 0, if "upgrade_available" is
+		1 "bootcount" is incremented in the environment.
+		So the Userspace Applikation must set the "upgrade_available"
+		and "bootcount" variable to 0, if a boot was successfully.
+
 - Pre-Boot Commands:
 		CONFIG_PREBOOT
 
@@ -4394,6 +4410,9 @@ Low Level (hardware related) configuration options:
 
 		NOTE : currently only supported on AM335x platforms.
 
+- CONFIG_SPL_AM33XX_ENABLE_RTC32K_OSC:
+		Enables the RTC32K OSC on AM33xx based plattforms
+
 Freescale QE/FMAN Firmware Support:
 -----------------------------------
 
diff --git a/arch/arm/config.mk b/arch/arm/config.mk
index bdabcf407e..fd3e5fb661 100644
--- a/arch/arm/config.mk
+++ b/arch/arm/config.mk
@@ -103,3 +103,6 @@ ALL-y += checkarmreloc
 # such usage by requiring word relocations.
 PLATFORM_CPPFLAGS += $(call cc-option, -mword-relocations)
 endif
+
+# limit ourselves to the sections we want in the .bin.
+OBJCFLAGS += -j .text -j .rodata -j .data -j .u_boot_list -j .rel.dyn
diff --git a/arch/arm/cpu/Makefile b/arch/arm/cpu/Makefile
index fd0da530e1..b2d30b1a72 100644
--- a/arch/arm/cpu/Makefile
+++ b/arch/arm/cpu/Makefile
@@ -1,2 +1,3 @@
+obj-$(CONFIG_AT91FAMILY) += at91-common/
 obj-$(CONFIG_TEGRA) += $(SOC)-common/
 obj-$(CONFIG_TEGRA) += tegra-common/
diff --git a/arch/arm/cpu/arm926ejs/at91/led.c b/arch/arm/cpu/arm926ejs/at91/led.c
index 5dd90487ed..46ed055023 100644
--- a/arch/arm/cpu/arm926ejs/at91/led.c
+++ b/arch/arm/cpu/arm926ejs/at91/led.c
@@ -7,43 +7,41 @@
  */
 
 #include <common.h>
-#include <asm/io.h>
-#include <asm/arch/at91_pmc.h>
-#include <asm/arch/at91_pio.h>
+#include <asm/gpio.h>
 #include <asm/arch/gpio.h>
 
 #ifdef CONFIG_RED_LED
 void red_led_on(void)
 {
-	at91_set_gpio_value(CONFIG_RED_LED, 1);
+	gpio_set_value(CONFIG_RED_LED, 1);
 }
 
 void red_led_off(void)
 {
-	at91_set_gpio_value(CONFIG_RED_LED, 0);
+	gpio_set_value(CONFIG_RED_LED, 0);
 }
 #endif
 
 #ifdef CONFIG_GREEN_LED
 void green_led_on(void)
 {
-	at91_set_gpio_value(CONFIG_GREEN_LED, 0);
+	gpio_set_value(CONFIG_GREEN_LED, 0);
 }
 
 void green_led_off(void)
 {
-	at91_set_gpio_value(CONFIG_GREEN_LED, 1);
+	gpio_set_value(CONFIG_GREEN_LED, 1);
 }
 #endif
 
 #ifdef CONFIG_YELLOW_LED
 void yellow_led_on(void)
 {
-	at91_set_gpio_value(CONFIG_YELLOW_LED, 0);
+	gpio_set_value(CONFIG_YELLOW_LED, 0);
 }
 
 void yellow_led_off(void)
 {
-	at91_set_gpio_value(CONFIG_YELLOW_LED, 1);
+	gpio_set_value(CONFIG_YELLOW_LED, 1);
 }
 #endif
diff --git a/arch/arm/cpu/arm926ejs/mxs/u-boot-spl.lds b/arch/arm/cpu/arm926ejs/mxs/u-boot-spl.lds
index 40bcc3132f..80fb9bdc8d 100644
--- a/arch/arm/cpu/arm926ejs/mxs/u-boot-spl.lds
+++ b/arch/arm/cpu/arm926ejs/mxs/u-boot-spl.lds
@@ -51,11 +51,13 @@ SECTIONS
 
 	_end = .;
 
-	/DISCARD/ : { *(.dynstr*) }
-	/DISCARD/ : { *(.dynsym*) }
-	/DISCARD/ : { *(.dynamic*) }
-	/DISCARD/ : { *(.hash*) }
-	/DISCARD/ : { *(.plt*) }
-	/DISCARD/ : { *(.interp*) }
-	/DISCARD/ : { *(.gnu*) }
+	.dynsym _end : { *(.dynsym) }
+	.dynbss : { *(.dynbss) }
+	.dynstr : { *(.dynstr*) }
+	.dynamic : { *(.dynamic*) }
+	.hash : { *(.hash*) }
+	.plt : { *(.plt*) }
+	.interp : { *(.interp*) }
+	.gnu : { *(.gnu*) }
+	.ARM.exidx : { *(.ARM.exidx*) }
 }
diff --git a/arch/arm/cpu/arm926ejs/spear/u-boot-spl.lds b/arch/arm/cpu/arm926ejs/spear/u-boot-spl.lds
index 4927736b9b..76b499d87f 100644
--- a/arch/arm/cpu/arm926ejs/spear/u-boot-spl.lds
+++ b/arch/arm/cpu/arm926ejs/spear/u-boot-spl.lds
@@ -51,11 +51,13 @@ SECTIONS
 
 	_end = .;
 
-	/DISCARD/ : { *(.dynstr*) }
-	/DISCARD/ : { *(.dynsym*) }
-	/DISCARD/ : { *(.dynamic*) }
-	/DISCARD/ : { *(.hash*) }
-	/DISCARD/ : { *(.plt*) }
-	/DISCARD/ : { *(.interp*) }
-	/DISCARD/ : { *(.gnu*) }
+	.dynsym _end : { *(.dynsym) }
+	.dynbss : { *(.dynbss) }
+	.dynstr : { *(.dynstr*) }
+	.dynamic : { *(.dynamic*) }
+	.hash : { *(.hash*) }
+	.plt : { *(.plt*) }
+	.interp : { *(.interp*) }
+	.gnu : { *(.gnu*) }
+	.ARM.exidx : { *(.ARM.exidx*) }
 }
diff --git a/arch/arm/cpu/armv7/Makefile b/arch/arm/cpu/armv7/Makefile
index d3347b375b..0467d00d6a 100644
--- a/arch/arm/cpu/armv7/Makefile
+++ b/arch/arm/cpu/armv7/Makefile
@@ -12,7 +12,7 @@ obj-y	+= cache_v7.o
 obj-y	+= cpu.o
 obj-y	+= syslib.o
 
-ifneq ($(CONFIG_AM43XX)$(CONFIG_AM33XX)$(CONFIG_OMAP44XX)$(CONFIG_OMAP54XX)$(CONFIG_TEGRA)$(CONFIG_MX6)$(CONFIG_TI81XX),)
+ifneq ($(CONFIG_AM43XX)$(CONFIG_AM33XX)$(CONFIG_OMAP44XX)$(CONFIG_OMAP54XX)$(CONFIG_TEGRA)$(CONFIG_MX6)$(CONFIG_TI81XX)$(CONFIG_AT91FAMILY),)
 ifneq ($(CONFIG_SKIP_LOWLEVEL_INIT),y)
 obj-y	+= lowlevel_init.o
 endif
diff --git a/arch/arm/cpu/armv7/am33xx/board.c b/arch/arm/cpu/armv7/am33xx/board.c
index 453effa541..803aa9c545 100644
--- a/arch/arm/cpu/armv7/am33xx/board.c
+++ b/arch/arm/cpu/armv7/am33xx/board.c
@@ -149,6 +149,7 @@ __weak void am33xx_spl_board_init(void)
 	do_setup_dpll(&dpll_mpu_regs, &dpll_mpu_opp100);
 }
 
+#if defined(CONFIG_SPL_AM33XX_ENABLE_RTC32K_OSC)
 static void rtc32k_enable(void)
 {
 	struct davinci_rtc *rtc = (struct davinci_rtc *)RTC_BASE;
@@ -164,6 +165,7 @@ static void rtc32k_enable(void)
 	/* Enable the RTC 32K OSC by setting bits 3 and 6. */
 	writel((1 << 3) | (1 << 6), &rtc->osc);
 }
+#endif
 
 static void uart_soft_reset(void)
 {
@@ -232,8 +234,10 @@ void s_init(void)
 #if defined(CONFIG_SPL_BUILD) || defined(CONFIG_NOR_BOOT)
 	prcm_init();
 	set_mux_conf_regs();
+#if defined(CONFIG_SPL_AM33XX_ENABLE_RTC32K_OSC)
 	/* Enable RTC32K clock */
 	rtc32k_enable();
+#endif
 	sdram_init();
 #endif
 }
diff --git a/arch/arm/cpu/armv7/am33xx/ddr.c b/arch/arm/cpu/armv7/am33xx/ddr.c
index fa697c74ab..5b0454c3ea 100644
--- a/arch/arm/cpu/armv7/am33xx/ddr.c
+++ b/arch/arm/cpu/armv7/am33xx/ddr.c
@@ -89,15 +89,12 @@ void config_ddr_phy(const struct emif_regs *regs, int nr)
 void config_cmd_ctrl(const struct cmd_control *cmd, int nr)
 {
 	writel(cmd->cmd0csratio, &ddr_cmd_reg[nr]->cm0csratio);
-	writel(cmd->cmd0dldiff, &ddr_cmd_reg[nr]->cm0dldiff);
 	writel(cmd->cmd0iclkout, &ddr_cmd_reg[nr]->cm0iclkout);
 
 	writel(cmd->cmd1csratio, &ddr_cmd_reg[nr]->cm1csratio);
-	writel(cmd->cmd1dldiff, &ddr_cmd_reg[nr]->cm1dldiff);
 	writel(cmd->cmd1iclkout, &ddr_cmd_reg[nr]->cm1iclkout);
 
 	writel(cmd->cmd2csratio, &ddr_cmd_reg[nr]->cm2csratio);
-	writel(cmd->cmd2dldiff, &ddr_cmd_reg[nr]->cm2dldiff);
 	writel(cmd->cmd2iclkout, &ddr_cmd_reg[nr]->cm2iclkout);
 }
 
@@ -121,10 +118,6 @@ void config_ddr_data(const struct ddr_data *data, int nr)
 			&(ddr_data_reg[nr]+i)->dt0fwsratio0);
 		writel(data->datawrsratio0,
 			&(ddr_data_reg[nr]+i)->dt0wrsratio0);
-		writel(data->datauserank0delay,
-			&(ddr_data_reg[nr]+i)->dt0rdelays0);
-		writel(data->datadldiff0,
-			&(ddr_data_reg[nr]+i)->dt0dldiff0);
 	}
 }
 
diff --git a/arch/arm/cpu/armv7/at91/sama5d3_devices.c b/arch/arm/cpu/armv7/at91/sama5d3_devices.c
index 51f0a6dff1..78ecfc882a 100644
--- a/arch/arm/cpu/armv7/at91/sama5d3_devices.c
+++ b/arch/arm/cpu/armv7/at91/sama5d3_devices.c
@@ -15,7 +15,7 @@
 
 unsigned int has_emac()
 {
-	return cpu_is_sama5d31() || cpu_is_sama5d35();
+	return cpu_is_sama5d31() || cpu_is_sama5d35() || cpu_is_sama5d36();
 }
 
 unsigned int has_gmac()
@@ -42,6 +42,8 @@ char *get_cpu_name()
 			return "SAMA5D34";
 		case ARCH_EXID_SAMA5D35:
 			return "SAMA5D35";
+		case ARCH_EXID_SAMA5D36:
+			return "SAMA5D36";
 		default:
 			return "Unknown CPU type";
 		}
@@ -82,7 +84,7 @@ void at91_seriald_hw_init(void)
 	at91_set_a_periph(AT91_PIO_PORTB, 30, 0);	/* DRXD */
 
 	/* Enable clock */
-	at91_periph_clk_enable(ATMEL_ID_SYS);
+	at91_periph_clk_enable(ATMEL_ID_DBGU);
 }
 
 #if defined(CONFIG_ATMEL_SPI)
diff --git a/arch/arm/cpu/armv7/at91/timer.c b/arch/arm/cpu/armv7/at91/timer.c
index 3808aedc79..e3ebfe0c52 100644
--- a/arch/arm/cpu/armv7/at91/timer.c
+++ b/arch/arm/cpu/armv7/at91/timer.c
@@ -60,7 +60,7 @@ int timer_init(void)
 	at91_pit_t *pit = (at91_pit_t *)ATMEL_BASE_PIT;
 
 	/* Enable PITC Clock */
-	at91_periph_clk_enable(ATMEL_ID_SYS);
+	at91_periph_clk_enable(ATMEL_ID_PIT);
 
 	/* Enable PITC */
 	writel(TIMER_LOAD_VAL | AT91_PIT_MR_EN , &pit->mr);
diff --git a/arch/arm/cpu/armv7/exynos/clock.c b/arch/arm/cpu/armv7/exynos/clock.c
index 36fedd630c..84a50470aa 100644
--- a/arch/arm/cpu/armv7/exynos/clock.c
+++ b/arch/arm/cpu/armv7/exynos/clock.c
@@ -1410,7 +1410,8 @@ void set_mmc_clk(int dev_index, unsigned int div)
 	else {
 		if (proid_is_exynos4412())
 			exynos4x12_set_mmc_clk(dev_index, div);
-		exynos4_set_mmc_clk(dev_index, div);
+		else
+			exynos4_set_mmc_clk(dev_index, div);
 	}
 }
 
diff --git a/arch/arm/cpu/armv7/exynos/pinmux.c b/arch/arm/cpu/armv7/exynos/pinmux.c
index 8002bce79c..74cc7009ff 100644
--- a/arch/arm/cpu/armv7/exynos/pinmux.c
+++ b/arch/arm/cpu/armv7/exynos/pinmux.c
@@ -462,7 +462,7 @@ static int exynos4_pinmux_config(int peripheral, int flags)
 	case PERIPH_ID_SDMMC1:
 	case PERIPH_ID_SDMMC3:
 	case PERIPH_ID_SDMMC4:
-		printf("SDMMC device %d not implemented\n", peripheral);
+		debug("SDMMC device %d not implemented\n", peripheral);
 		return -1;
 	default:
 		debug("%s: invalid peripheral %d", __func__, peripheral);
diff --git a/arch/arm/cpu/armv7/exynos/spl_boot.c b/arch/arm/cpu/armv7/exynos/spl_boot.c
index 3651c00859..ade45fd5d3 100644
--- a/arch/arm/cpu/armv7/exynos/spl_boot.c
+++ b/arch/arm/cpu/armv7/exynos/spl_boot.c
@@ -10,8 +10,11 @@
 #include <asm/arch/clock.h>
 #include <asm/arch/clk.h>
 #include <asm/arch/dmc.h>
+#include <asm/arch/periph.h>
+#include <asm/arch/pinmux.h>
 #include <asm/arch/power.h>
 #include <asm/arch/spl.h>
+#include <asm/arch/spi.h>
 
 #include "common_setup.h"
 #include "clock_init.h"
@@ -59,6 +62,121 @@ static int config_branch_prediction(int set_cr_z)
 }
 #endif
 
+#ifdef CONFIG_SPI_BOOTING
+static void spi_rx_tx(struct exynos_spi *regs, int todo,
+			void *dinp, void const *doutp, int i)
+{
+	uint *rxp = (uint *)(dinp + (i * (32 * 1024)));
+	int rx_lvl, tx_lvl;
+	uint out_bytes, in_bytes;
+
+	out_bytes = todo;
+	in_bytes = todo;
+	setbits_le32(&regs->ch_cfg, SPI_CH_RST);
+	clrbits_le32(&regs->ch_cfg, SPI_CH_RST);
+	writel(((todo * 8) / 32) | SPI_PACKET_CNT_EN, &regs->pkt_cnt);
+
+	while (in_bytes) {
+		uint32_t spi_sts;
+		int temp;
+
+		spi_sts = readl(&regs->spi_sts);
+		rx_lvl = ((spi_sts >> 15) & 0x7f);
+		tx_lvl = ((spi_sts >> 6) & 0x7f);
+		while (tx_lvl < 32 && out_bytes) {
+			temp = 0xffffffff;
+			writel(temp, &regs->tx_data);
+			out_bytes -= 4;
+			tx_lvl += 4;
+		}
+		while (rx_lvl >= 4 && in_bytes) {
+			temp = readl(&regs->rx_data);
+			if (rxp)
+				*rxp++ = temp;
+			in_bytes -= 4;
+			rx_lvl -= 4;
+		}
+	}
+}
+
+/*
+ * Copy uboot from spi flash to RAM
+ *
+ * @parma uboot_size	size of u-boot to copy
+ * @param uboot_addr	address in u-boot to copy
+ */
+static void exynos_spi_copy(unsigned int uboot_size, unsigned int uboot_addr)
+{
+	int upto, todo;
+	int i, timeout = 100;
+	struct exynos_spi *regs = (struct exynos_spi *)CONFIG_ENV_SPI_BASE;
+
+	set_spi_clk(PERIPH_ID_SPI1, 50000000); /* set spi clock to 50Mhz */
+	/* set the spi1 GPIO */
+	exynos_pinmux_config(PERIPH_ID_SPI1, PINMUX_FLAG_NONE);
+
+	/* set pktcnt and enable it */
+	writel(4 | SPI_PACKET_CNT_EN, &regs->pkt_cnt);
+	/* set FB_CLK_SEL */
+	writel(SPI_FB_DELAY_180, &regs->fb_clk);
+	/* set CH_WIDTH and BUS_WIDTH as word */
+	setbits_le32(&regs->mode_cfg, SPI_MODE_CH_WIDTH_WORD |
+					SPI_MODE_BUS_WIDTH_WORD);
+	clrbits_le32(&regs->ch_cfg, SPI_CH_CPOL_L); /* CPOL: active high */
+
+	/* clear rx and tx channel if set priveously */
+	clrbits_le32(&regs->ch_cfg, SPI_RX_CH_ON | SPI_TX_CH_ON);
+
+	setbits_le32(&regs->swap_cfg, SPI_RX_SWAP_EN |
+			SPI_RX_BYTE_SWAP |
+			SPI_RX_HWORD_SWAP);
+
+	/* do a soft reset */
+	setbits_le32(&regs->ch_cfg, SPI_CH_RST);
+	clrbits_le32(&regs->ch_cfg, SPI_CH_RST);
+
+	/* now set rx and tx channel ON */
+	setbits_le32(&regs->ch_cfg, SPI_RX_CH_ON | SPI_TX_CH_ON | SPI_CH_HS_EN);
+	clrbits_le32(&regs->cs_reg, SPI_SLAVE_SIG_INACT); /* CS low */
+
+	/* Send read instruction (0x3h) followed by a 24 bit addr */
+	writel((SF_READ_DATA_CMD << 24) | SPI_FLASH_UBOOT_POS, &regs->tx_data);
+
+	/* waiting for TX done */
+	while (!(readl(&regs->spi_sts) & SPI_ST_TX_DONE)) {
+		if (!timeout) {
+			debug("SPI TIMEOUT\n");
+			break;
+		}
+		timeout--;
+	}
+
+	for (upto = 0, i = 0; upto < uboot_size; upto += todo, i++) {
+		todo = min(uboot_size - upto, (1 << 15));
+		spi_rx_tx(regs, todo, (void *)(uboot_addr),
+			  (void *)(SPI_FLASH_UBOOT_POS), i);
+	}
+
+	setbits_le32(&regs->cs_reg, SPI_SLAVE_SIG_INACT);/* make the CS high */
+
+	/*
+	 * Let put controller mode to BYTE as
+	 * SPI driver does not support WORD mode yet
+	 */
+	clrbits_le32(&regs->mode_cfg, SPI_MODE_CH_WIDTH_WORD |
+					SPI_MODE_BUS_WIDTH_WORD);
+	writel(0, &regs->swap_cfg);
+
+	/*
+	 * Flush spi tx, rx fifos and reset the SPI controller
+	 * and clear rx/tx channel
+	 */
+	clrsetbits_le32(&regs->ch_cfg, SPI_CH_HS_EN, SPI_CH_RST);
+	clrbits_le32(&regs->ch_cfg, SPI_CH_RST);
+	clrbits_le32(&regs->ch_cfg, SPI_TX_CH_ON | SPI_RX_CH_ON);
+}
+#endif
+
 /*
 * Copy U-boot from mmc to RAM:
 * COPY_BL2_FNPTR_ADDR: Address in iRAM, which Contains
@@ -70,6 +188,9 @@ void copy_uboot_to_ram(void)
 
 	u32 (*copy_bl2)(u32 offset, u32 nblock, u32 dst) = NULL;
 	u32 offset = 0, size = 0;
+#ifdef CONFIG_SPI_BOOTING
+	struct spl_machine_param *param = spl_get_machine_params();
+#endif
 #ifdef CONFIG_SUPPORT_EMMC_BOOT
 	u32 (*copy_bl2_from_emmc)(u32 nblock, u32 dst);
 	void (*end_bootop_from_emmc)(void);
@@ -91,9 +212,8 @@ void copy_uboot_to_ram(void)
 	switch (bootmode) {
 #ifdef CONFIG_SPI_BOOTING
 	case BOOT_MODE_SERIAL:
-		offset = SPI_FLASH_UBOOT_POS;
-		size = CONFIG_BL2_SIZE;
-		copy_bl2 = get_irom_func(SPI_INDEX);
+		/* Customised function to copy u-boot from SF */
+		exynos_spi_copy(param->uboot_size, CONFIG_SYS_TEXT_BASE);
 		break;
 #endif
 	case BOOT_MODE_MMC:
diff --git a/arch/arm/cpu/armv7/nonsec_virt.S b/arch/arm/cpu/armv7/nonsec_virt.S
index 24b4c18bd4..6367e09612 100644
--- a/arch/arm/cpu/armv7/nonsec_virt.S
+++ b/arch/arm/cpu/armv7/nonsec_virt.S
@@ -14,6 +14,7 @@
 .arch_extension sec
 .arch_extension virt
 
+	.align	5
 /* the vector table for secure state and HYP mode */
 _monitor_vectors:
 	.word 0	/* reset */
@@ -32,7 +33,6 @@ _monitor_vectors:
  * to non-secure state.
  * We use only r0 and r1 here, due to constraints in the caller.
  */
-	.align	5
 _secure_monitor:
 	mrc	p15, 0, r1, c1, c1, 0		@ read SCR
 	bic	r1, r1, #0x4e			@ clear IRQ, FIQ, EA, nET bits
diff --git a/arch/arm/cpu/armv7/omap-common/Makefile b/arch/arm/cpu/armv7/omap-common/Makefile
index 4d3a165f59..59f5352b26 100644
--- a/arch/arm/cpu/armv7/omap-common/Makefile
+++ b/arch/arm/cpu/armv7/omap-common/Makefile
@@ -17,6 +17,11 @@ obj-y	+= vc.o
 obj-y	+= abb.o
 endif
 
+ifneq ($(CONFIG_OMAP54XX),)
+obj-y	+= pipe3-phy.o
+obj-$(CONFIG_SCSI_AHCI_PLAT) += sata.o
+endif
+
 ifeq ($(CONFIG_OMAP34XX),)
 obj-y	+= boot-common.o
 obj-y	+= lowlevel_init.o
diff --git a/arch/arm/cpu/armv7/omap-common/emif-common.c b/arch/arm/cpu/armv7/omap-common/emif-common.c
index b0e1caa356..5a3f2858cd 100644
--- a/arch/arm/cpu/armv7/omap-common/emif-common.c
+++ b/arch/arm/cpu/armv7/omap-common/emif-common.c
@@ -206,7 +206,7 @@ void emif_update_timings(u32 base, const struct emif_regs *regs)
 	}
 }
 
-static void ddr3_leveling(u32 base, const struct emif_regs *regs)
+static void omap5_ddr3_leveling(u32 base, const struct emif_regs *regs)
 {
 	struct emif_reg_struct *emif = (struct emif_reg_struct *)base;
 
@@ -217,47 +217,86 @@ static void ddr3_leveling(u32 base, const struct emif_regs *regs)
 
 	/*
 	 * Set invert_clkout (if activated)--DDR_PHYCTRL_1
-	 * Invert clock adds an additional half cycle delay on the command
-	 * interface.  The additional half cycle, is usually meant to enable
-	 * leveling in the situation that DQS is later than CK on the board.It
-	 * also helps provide some additional margin for leveling.
+	 * Invert clock adds an additional half cycle delay on the
+	 * command interface.  The additional half cycle, is usually
+	 * meant to enable leveling in the situation that DQS is later
+	 * than CK on the board.It also helps provide some additional
+	 * margin for leveling.
 	 */
-	writel(regs->emif_ddr_phy_ctlr_1, &emif->emif_ddr_phy_ctrl_1);
-	writel(regs->emif_ddr_phy_ctlr_1, &emif->emif_ddr_phy_ctrl_1_shdw);
+	writel(regs->emif_ddr_phy_ctlr_1,
+	       &emif->emif_ddr_phy_ctrl_1);
+
+	writel(regs->emif_ddr_phy_ctlr_1,
+	       &emif->emif_ddr_phy_ctrl_1_shdw);
 	__udelay(130);
 
 	writel(((LP_MODE_DISABLE << EMIF_REG_LP_MODE_SHIFT)
-		& EMIF_REG_LP_MODE_MASK), &emif->emif_pwr_mgmt_ctrl);
+	       & EMIF_REG_LP_MODE_MASK), &emif->emif_pwr_mgmt_ctrl);
 
 	/* Launch Full leveling */
 	writel(DDR3_FULL_LVL, &emif->emif_rd_wr_lvl_ctl);
 
 	/* Wait till full leveling is complete */
 	readl(&emif->emif_rd_wr_lvl_ctl);
-	__udelay(130);
+	      __udelay(130);
 
 	/* Read data eye leveling no of samples */
 	config_data_eye_leveling_samples(base);
 
-	/* Launch 8 incremental WR_LVL- to compensate for PHY limitation */
-	writel(0x2 << EMIF_REG_WRLVLINC_INT_SHIFT, &emif->emif_rd_wr_lvl_ctl);
+	/*
+	 * Launch 8 incremental WR_LVL- to compensate for
+	 * PHY limitation.
+	 */
+	writel(0x2 << EMIF_REG_WRLVLINC_INT_SHIFT,
+	       &emif->emif_rd_wr_lvl_ctl);
+
 	__udelay(130);
 
 	/* Launch Incremental leveling */
 	writel(DDR3_INC_LVL, &emif->emif_rd_wr_lvl_ctl);
-	__udelay(130);
+	       __udelay(130);
 }
 
-static void ddr3_sw_leveling(u32 base, const struct emif_regs *regs)
+static void dra7_ddr3_leveling(u32 base, const struct emif_regs *regs)
 {
 	struct emif_reg_struct *emif = (struct emif_reg_struct *)base;
 
-	writel(regs->emif_ddr_phy_ctlr_1, &emif->emif_ddr_phy_ctrl_1);
-	writel(regs->emif_ddr_phy_ctlr_1, &emif->emif_ddr_phy_ctrl_1_shdw);
+	u32 fifo_reg;
+
+	fifo_reg = readl(&emif->emif_ddr_fifo_misaligned_clear_1);
+	writel(fifo_reg | 0x00000100,
+	       &emif->emif_ddr_fifo_misaligned_clear_1);
+
+	fifo_reg = readl(&emif->emif_ddr_fifo_misaligned_clear_2);
+	writel(fifo_reg | 0x00000100,
+	       &emif->emif_ddr_fifo_misaligned_clear_2);
+
+	/* Launch Full leveling */
+	writel(DDR3_FULL_LVL, &emif->emif_rd_wr_lvl_ctl);
+
+	/* Wait till full leveling is complete */
+	readl(&emif->emif_rd_wr_lvl_ctl);
+	      __udelay(130);
+
+	/* Read data eye leveling no of samples */
 	config_data_eye_leveling_samples(base);
 
-	writel(regs->emif_rd_wr_lvl_ctl, &emif->emif_rd_wr_lvl_ctl);
-	writel(regs->sdram_config, &emif->emif_sdram_config);
+	/*
+	 * Disable leveling. This is because if leveling is kept
+	 * enabled, then PHY triggers a false leveling during
+	 * EMIF-idle scenario which results in wrong delay
+	 * values getting updated. After this the EMIF becomes
+	 * unaccessible. So disable it after the first time
+	 */
+	writel(0x0, &emif->emif_rd_wr_lvl_rmp_ctl);
+}
+
+static void ddr3_leveling(u32 base, const struct emif_regs *regs)
+{
+	if (is_omap54xx())
+		omap5_ddr3_leveling(base, regs);
+	else
+		dra7_ddr3_leveling(base, regs);
 }
 
 static void ddr3_init(u32 base, const struct emif_regs *regs)
@@ -270,9 +309,6 @@ static void ddr3_init(u32 base, const struct emif_regs *regs)
 	 * defined, contents of mode Registers must be fully initialized.
 	 * H/W takes care of this initialization
 	 */
-	writel(regs->sdram_config2, &emif->emif_lpddr2_nvm_config);
-	writel(regs->sdram_config_init, &emif->emif_sdram_config);
-
 	writel(regs->emif_ddr_phy_ctlr_1_init, &emif->emif_ddr_phy_ctrl_1);
 
 	/* Update timing registers */
@@ -283,15 +319,24 @@ static void ddr3_init(u32 base, const struct emif_regs *regs)
 	writel(regs->ref_ctrl, &emif->emif_sdram_ref_ctrl);
 	writel(regs->read_idle_ctrl, &emif->emif_read_idlectrl);
 
-	do_ext_phy_settings(base, regs);
+	/*
+	 * The same sequence should work on OMAP5432 as well. But strange that
+	 * it is not working
+	 */
+	if (omap_revision() == DRA752_ES1_0) {
+		do_ext_phy_settings(base, regs);
+		writel(regs->sdram_config2, &emif->emif_lpddr2_nvm_config);
+		writel(regs->sdram_config_init, &emif->emif_sdram_config);
+	} else {
+		writel(regs->sdram_config2, &emif->emif_lpddr2_nvm_config);
+		writel(regs->sdram_config_init, &emif->emif_sdram_config);
+		do_ext_phy_settings(base, regs);
+	}
 
 	/* enable leveling */
 	writel(regs->emif_rd_wr_lvl_rmp_ctl, &emif->emif_rd_wr_lvl_rmp_ctl);
 
-	if (omap_revision() == DRA752_ES1_0)
-		ddr3_sw_leveling(base, regs);
-	else
-		ddr3_leveling(base, regs);
+	ddr3_leveling(base, regs);
 }
 
 #ifndef CONFIG_SYS_EMIF_PRECALCULATED_TIMING_REGS
@@ -1079,10 +1124,7 @@ static void do_sdram_init(u32 base)
 	if (warm_reset() && (emif_sdram_type() == EMIF_SDRAM_TYPE_DDR3)) {
 		set_lpmode_selfrefresh(base);
 		emif_reset_phy(base);
-		if (omap_revision() == DRA752_ES1_0)
-			ddr3_sw_leveling(base, regs);
-		else
-			ddr3_leveling(base, regs);
+		ddr3_leveling(base, regs);
 	}
 
 	/* Write to the shadow registers */
@@ -1244,6 +1286,42 @@ void dmm_init(u32 base)
 
 }
 
+static void do_bug0039_workaround(u32 base)
+{
+	u32 val, i, clkctrl;
+	struct emif_reg_struct *emif_base = (struct emif_reg_struct *)base;
+	const struct read_write_regs *bug_00339_regs;
+	u32 iterations;
+	u32 *phy_status_base = &emif_base->emif_ddr_phy_status[0];
+	u32 *phy_ctrl_base = &emif_base->emif_ddr_ext_phy_ctrl_1;
+
+	if (is_dra7xx())
+		phy_status_base++;
+
+	bug_00339_regs = get_bug_regs(&iterations);
+
+	/* Put EMIF in to idle */
+	clkctrl = __raw_readl((*prcm)->cm_memif_clkstctrl);
+	__raw_writel(0x0, (*prcm)->cm_memif_clkstctrl);
+
+	/* Copy the phy status registers in to phy ctrl shadow registers */
+	for (i = 0; i < iterations; i++) {
+		val = __raw_readl(phy_status_base +
+				  bug_00339_regs[i].read_reg - 1);
+
+		__raw_writel(val, phy_ctrl_base +
+			     ((bug_00339_regs[i].write_reg - 1) << 1));
+
+		__raw_writel(val, phy_ctrl_base +
+			     (bug_00339_regs[i].write_reg << 1) - 1);
+	}
+
+	/* Disable leveling */
+	writel(0x0, &emif_base->emif_rd_wr_lvl_rmp_ctl);
+
+	__raw_writel(clkctrl,  (*prcm)->cm_memif_clkstctrl);
+}
+
 /*
  * SDRAM initialization:
  * SDRAM initialization has two parts:
@@ -1319,5 +1397,11 @@ void sdram_init(void)
 			debug("get_ram_size() successful");
 	}
 
+	if (sdram_type == EMIF_SDRAM_TYPE_DDR3 &&
+	    (!in_sdram && !warm_reset())) {
+		do_bug0039_workaround(EMIF1_BASE);
+		do_bug0039_workaround(EMIF2_BASE);
+	}
+
 	debug("<<sdram_init()\n");
 }
diff --git a/arch/arm/cpu/armv7/omap-common/pipe3-phy.c b/arch/arm/cpu/armv7/omap-common/pipe3-phy.c
new file mode 100644
index 0000000000..b71d769410
--- /dev/null
+++ b/arch/arm/cpu/armv7/omap-common/pipe3-phy.c
@@ -0,0 +1,231 @@
+/*
+ * TI PIPE3 PHY
+ *
+ * (C) Copyright 2013
+ * Texas Instruments, <www.ti.com>
+ *
+ * SPDX-License-Identifier:     GPL-2.0+
+ */
+
+#include <common.h>
+#include <sata.h>
+#include <asm/arch/clock.h>
+#include <asm/arch/sys_proto.h>
+#include <asm/io.h>
+#include <asm/errno.h>
+#include "pipe3-phy.h"
+
+/* PLLCTRL Registers */
+#define PLL_STATUS              0x00000004
+#define PLL_GO                  0x00000008
+#define PLL_CONFIGURATION1      0x0000000C
+#define PLL_CONFIGURATION2      0x00000010
+#define PLL_CONFIGURATION3      0x00000014
+#define PLL_CONFIGURATION4      0x00000020
+
+#define PLL_REGM_MASK           0x001FFE00
+#define PLL_REGM_SHIFT          9
+#define PLL_REGM_F_MASK         0x0003FFFF
+#define PLL_REGM_F_SHIFT        0
+#define PLL_REGN_MASK           0x000001FE
+#define PLL_REGN_SHIFT          1
+#define PLL_SELFREQDCO_MASK     0x0000000E
+#define PLL_SELFREQDCO_SHIFT    1
+#define PLL_SD_MASK             0x0003FC00
+#define PLL_SD_SHIFT            10
+#define SET_PLL_GO              0x1
+#define PLL_TICOPWDN            BIT(16)
+#define PLL_LDOPWDN             BIT(15)
+#define PLL_LOCK                0x2
+#define PLL_IDLE                0x1
+
+/* PHY POWER CONTROL Register */
+#define OMAP_CTRL_PIPE3_PHY_PWRCTL_CLK_CMD_MASK         0x003FC000
+#define OMAP_CTRL_PIPE3_PHY_PWRCTL_CLK_CMD_SHIFT        0xE
+
+#define OMAP_CTRL_PIPE3_PHY_PWRCTL_CLK_FREQ_MASK        0xFFC00000
+#define OMAP_CTRL_PIPE3_PHY_PWRCTL_CLK_FREQ_SHIFT       0x16
+
+#define OMAP_CTRL_PIPE3_PHY_TX_RX_POWERON       0x3
+#define OMAP_CTRL_PIPE3_PHY_TX_RX_POWEROFF      0x0
+
+
+#define PLL_IDLE_TIME   100     /* in milliseconds */
+#define PLL_LOCK_TIME   100     /* in milliseconds */
+
+static inline u32 omap_pipe3_readl(void __iomem *addr, unsigned offset)
+{
+	return __raw_readl(addr + offset);
+}
+
+static inline void omap_pipe3_writel(void __iomem *addr, unsigned offset,
+		u32 data)
+{
+	__raw_writel(data, addr + offset);
+}
+
+static struct pipe3_dpll_params *omap_pipe3_get_dpll_params(struct omap_pipe3
+									*pipe3)
+{
+	u32 rate;
+	struct pipe3_dpll_map *dpll_map = pipe3->dpll_map;
+
+	rate = get_sys_clk_freq();
+
+	for (; dpll_map->rate; dpll_map++) {
+		if (rate == dpll_map->rate)
+			return &dpll_map->params;
+	}
+
+	printf("%s: No DPLL configuration for %u Hz SYS CLK\n",
+	       __func__, rate);
+	return NULL;
+}
+
+
+static int omap_pipe3_wait_lock(struct omap_pipe3 *phy)
+{
+	u32 val;
+	int timeout = PLL_LOCK_TIME;
+
+	do {
+		mdelay(1);
+		val = omap_pipe3_readl(phy->pll_ctrl_base, PLL_STATUS);
+		if (val & PLL_LOCK)
+			break;
+	} while (--timeout);
+
+	if (!(val & PLL_LOCK)) {
+		printf("%s: DPLL failed to lock\n", __func__);
+		return -EBUSY;
+	}
+
+	return 0;
+}
+
+static int omap_pipe3_dpll_program(struct omap_pipe3 *phy)
+{
+	u32                     val;
+	struct pipe3_dpll_params *dpll_params;
+
+	dpll_params = omap_pipe3_get_dpll_params(phy);
+	if (!dpll_params) {
+		printf("%s: Invalid DPLL parameters\n", __func__);
+		return -EINVAL;
+	}
+
+	val = omap_pipe3_readl(phy->pll_ctrl_base, PLL_CONFIGURATION1);
+	val &= ~PLL_REGN_MASK;
+	val |= dpll_params->n << PLL_REGN_SHIFT;
+	omap_pipe3_writel(phy->pll_ctrl_base, PLL_CONFIGURATION1, val);
+
+	val = omap_pipe3_readl(phy->pll_ctrl_base, PLL_CONFIGURATION2);
+	val &= ~PLL_SELFREQDCO_MASK;
+	val |= dpll_params->freq << PLL_SELFREQDCO_SHIFT;
+	omap_pipe3_writel(phy->pll_ctrl_base, PLL_CONFIGURATION2, val);
+
+	val = omap_pipe3_readl(phy->pll_ctrl_base, PLL_CONFIGURATION1);
+	val &= ~PLL_REGM_MASK;
+	val |= dpll_params->m << PLL_REGM_SHIFT;
+	omap_pipe3_writel(phy->pll_ctrl_base, PLL_CONFIGURATION1, val);
+
+	val = omap_pipe3_readl(phy->pll_ctrl_base, PLL_CONFIGURATION4);
+	val &= ~PLL_REGM_F_MASK;
+	val |= dpll_params->mf << PLL_REGM_F_SHIFT;
+	omap_pipe3_writel(phy->pll_ctrl_base, PLL_CONFIGURATION4, val);
+
+	val = omap_pipe3_readl(phy->pll_ctrl_base, PLL_CONFIGURATION3);
+	val &= ~PLL_SD_MASK;
+	val |= dpll_params->sd << PLL_SD_SHIFT;
+	omap_pipe3_writel(phy->pll_ctrl_base, PLL_CONFIGURATION3, val);
+
+	omap_pipe3_writel(phy->pll_ctrl_base, PLL_GO, SET_PLL_GO);
+
+	return omap_pipe3_wait_lock(phy);
+}
+
+static void omap_control_phy_power(struct omap_pipe3 *phy, int on)
+{
+	u32 val, rate;
+
+	val = readl(phy->power_reg);
+
+	rate = get_sys_clk_freq();
+	rate = rate/1000000;
+
+	if (on) {
+		val &= ~(OMAP_CTRL_PIPE3_PHY_PWRCTL_CLK_CMD_MASK |
+				OMAP_CTRL_PIPE3_PHY_PWRCTL_CLK_FREQ_MASK);
+		val |= OMAP_CTRL_PIPE3_PHY_TX_RX_POWERON <<
+			OMAP_CTRL_PIPE3_PHY_PWRCTL_CLK_CMD_SHIFT;
+		val |= rate <<
+			OMAP_CTRL_PIPE3_PHY_PWRCTL_CLK_FREQ_SHIFT;
+	} else {
+		val &= ~OMAP_CTRL_PIPE3_PHY_PWRCTL_CLK_CMD_MASK;
+		val |= OMAP_CTRL_PIPE3_PHY_TX_RX_POWEROFF <<
+			OMAP_CTRL_PIPE3_PHY_PWRCTL_CLK_CMD_SHIFT;
+	}
+
+	writel(val, phy->power_reg);
+}
+
+int phy_pipe3_power_on(struct omap_pipe3 *phy)
+{
+	int ret;
+	u32 val;
+
+	/* Program the DPLL only if not locked */
+	val = omap_pipe3_readl(phy->pll_ctrl_base, PLL_STATUS);
+	if (!(val & PLL_LOCK)) {
+		ret = omap_pipe3_dpll_program(phy);
+		if (ret)
+			return ret;
+	} else {
+		/* else just bring it out of IDLE mode */
+		val = omap_pipe3_readl(phy->pll_ctrl_base, PLL_CONFIGURATION2);
+		if (val & PLL_IDLE) {
+			val &= ~PLL_IDLE;
+			omap_pipe3_writel(phy->pll_ctrl_base,
+					  PLL_CONFIGURATION2, val);
+			ret = omap_pipe3_wait_lock(phy);
+			if (ret)
+				return ret;
+		}
+	}
+
+	/* Power up the PHY */
+	omap_control_phy_power(phy, 1);
+
+	return 0;
+}
+
+int phy_pipe3_power_off(struct omap_pipe3 *phy)
+{
+	u32 val;
+	int timeout = PLL_IDLE_TIME;
+
+	/* Power down the PHY */
+	omap_control_phy_power(phy, 0);
+
+	/* Put DPLL in IDLE mode */
+	val = omap_pipe3_readl(phy->pll_ctrl_base, PLL_CONFIGURATION2);
+	val |= PLL_IDLE;
+	omap_pipe3_writel(phy->pll_ctrl_base, PLL_CONFIGURATION2, val);
+
+	/* wait for LDO and Oscillator to power down */
+	do {
+		mdelay(1);
+		val = omap_pipe3_readl(phy->pll_ctrl_base, PLL_STATUS);
+		if ((val & PLL_TICOPWDN) && (val & PLL_LDOPWDN))
+			break;
+	} while (--timeout);
+
+	if (!(val & PLL_TICOPWDN) || !(val & PLL_LDOPWDN)) {
+		printf("%s: Failed to power down DPLL: PLL_STATUS 0x%x\n",
+		       __func__, val);
+		return -EBUSY;
+	}
+
+	return 0;
+}
+
diff --git a/arch/arm/cpu/armv7/omap-common/pipe3-phy.h b/arch/arm/cpu/armv7/omap-common/pipe3-phy.h
new file mode 100644
index 0000000000..441f49a3f9
--- /dev/null
+++ b/arch/arm/cpu/armv7/omap-common/pipe3-phy.h
@@ -0,0 +1,36 @@
+/*
+ * TI PIPE3 PHY
+ *
+ * (C) Copyright 2013
+ * Texas Instruments, <www.ti.com>
+ *
+ * SPDX-License-Identifier:     GPL-2.0+
+ */
+
+#ifndef __OMAP_PIPE3_PHY_H
+#define __OMAP_PIPE3_PHY_H
+
+struct pipe3_dpll_params {
+	u16     m;
+	u8      n;
+	u8      freq:3;
+	u8      sd;
+	u32     mf;
+};
+
+struct pipe3_dpll_map {
+	unsigned long rate;
+	struct pipe3_dpll_params params;
+};
+
+struct omap_pipe3 {
+	void __iomem            *pll_ctrl_base;
+	void __iomem		*power_reg;
+	struct pipe3_dpll_map   *dpll_map;
+};
+
+
+int phy_pipe3_power_on(struct omap_pipe3 *phy);
+int phy_pipe3_power_off(struct omap_pipe3 *pipe3);
+
+#endif /* __OMAP_PIPE3_PHY_H */
diff --git a/arch/arm/cpu/armv7/omap-common/sata.c b/arch/arm/cpu/armv7/omap-common/sata.c
new file mode 100644
index 0000000000..f5468c4c97
--- /dev/null
+++ b/arch/arm/cpu/armv7/omap-common/sata.c
@@ -0,0 +1,75 @@
+/*
+ * TI SATA platform driver
+ *
+ * (C) Copyright 2013
+ * Texas Instruments, <www.ti.com>
+ *
+ * SPDX-License-Identifier:     GPL-2.0+
+ */
+
+#include <common.h>
+#include <ahci.h>
+#include <scsi.h>
+#include <asm/arch/clock.h>
+#include <asm/arch/sata.h>
+#include <asm/io.h>
+#include "pipe3-phy.h"
+
+static struct pipe3_dpll_map dpll_map_sata[] = {
+	{12000000, {1000, 7, 4, 6, 0} },        /* 12 MHz */
+	{16800000, {714, 7, 4, 6, 0} },         /* 16.8 MHz */
+	{19200000, {625, 7, 4, 6, 0} },         /* 19.2 MHz */
+	{20000000, {600, 7, 4, 6, 0} },         /* 20 MHz */
+	{26000000, {461, 7, 4, 6, 0} },         /* 26 MHz */
+	{38400000, {312, 7, 4, 6, 0} },         /* 38.4 MHz */
+	{ },                                    /* Terminator */
+};
+
+struct omap_pipe3 sata_phy = {
+	.pll_ctrl_base = (void __iomem *)TI_SATA_PLLCTRL_BASE,
+	/* .power_reg is updated at runtime */
+	.dpll_map = dpll_map_sata,
+};
+
+int omap_sata_init(void)
+{
+	int ret;
+	u32 val;
+
+	u32 const clk_domains_sata[] = {
+		0
+	};
+
+	u32 const clk_modules_hw_auto_sata[] = {
+		(*prcm)->cm_l3init_ocp2scp3_clkctrl,
+		0
+	};
+
+	u32 const clk_modules_explicit_en_sata[] = {
+		(*prcm)->cm_l3init_sata_clkctrl,
+		0
+	};
+
+	do_enable_clocks(clk_domains_sata,
+			 clk_modules_hw_auto_sata,
+			 clk_modules_explicit_en_sata,
+			 0);
+
+	/* Enable optional functional clock for SATA */
+	setbits_le32((*prcm)->cm_l3init_sata_clkctrl,
+		     SATA_CLKCTRL_OPTFCLKEN_MASK);
+
+	sata_phy.power_reg = (void __iomem *)(*ctrl)->control_phy_power_sata;
+
+	/* Power up the PHY */
+	phy_pipe3_power_on(&sata_phy);
+
+	/* Enable SATA module, No Idle, No Standby */
+	val = TI_SATA_IDLE_NO | TI_SATA_STANDBY_NO;
+	writel(val, TI_SATA_WRAPPER_BASE + TI_SATA_SYSCONFIG);
+
+	ret = ahci_init(DWC_AHSATA_BASE);
+	scsi_scan(1);
+
+	return ret;
+}
diff --git a/arch/arm/cpu/armv7/omap3/clock.c b/arch/arm/cpu/armv7/omap3/clock.c
index 14fc7e8e81..1bc27bdc7f 100644
--- a/arch/arm/cpu/armv7/omap3/clock.c
+++ b/arch/arm/cpu/armv7/omap3/clock.c
@@ -730,8 +730,6 @@ void per_clocks_enable(void)
 		sr32(&prcm_base->fclken_cam, 0, 32, FCK_CAM_ON);
 		sr32(&prcm_base->iclken_cam, 0, 32, ICK_CAM_ON);
 	}
-	sr32(&prcm_base->fclken_per, 0, 32, FCK_PER_ON);
-	sr32(&prcm_base->iclken_per, 0, 32, ICK_PER_ON);
 
 	sdelay(1000);
 }
diff --git a/arch/arm/cpu/armv7/omap4/hw_data.c b/arch/arm/cpu/armv7/omap4/hw_data.c
index 6a225c8cb2..1b2f439241 100644
--- a/arch/arm/cpu/armv7/omap4/hw_data.c
+++ b/arch/arm/cpu/armv7/omap4/hw_data.c
@@ -288,17 +288,21 @@ struct vcores_data omap4460_volts = {
 	.mm.pmic = &twl6030,
 };
 
+/*
+ * Take closest integer part of the mV value corresponding to a TWL6032 SMPS
+ * voltage selection code. Aligned with OMAP4470 ES1.0 OCA V.0.7.
+ */
 struct vcores_data omap4470_volts = {
-	.mpu.value = 1200,
+	.mpu.value = 1202,
 	.mpu.addr = SMPS_REG_ADDR_SMPS1,
 	.mpu.pmic = &twl6030,
 
 	.core.value = 1126,
-	.core.addr = SMPS_REG_ADDR_SMPS1,
+	.core.addr = SMPS_REG_ADDR_SMPS2,
 	.core.pmic = &twl6030,
 
-	.mm.value = 1137,
-	.mm.addr = SMPS_REG_ADDR_SMPS1,
+	.mm.value = 1139,
+	.mm.addr = SMPS_REG_ADDR_SMPS5,
 	.mm.pmic = &twl6030,
 };
 
diff --git a/arch/arm/cpu/armv7/omap4/sdram_elpida.c b/arch/arm/cpu/armv7/omap4/sdram_elpida.c
index e4c8316370..6903696e1b 100644
--- a/arch/arm/cpu/armv7/omap4/sdram_elpida.c
+++ b/arch/arm/cpu/armv7/omap4/sdram_elpida.c
@@ -32,7 +32,7 @@
 
 #ifdef CONFIG_SYS_EMIF_PRECALCULATED_TIMING_REGS
 
-static const struct emif_regs emif_regs_elpida_200_mhz_2cs = {
+const struct emif_regs emif_regs_elpida_200_mhz_2cs = {
 	.sdram_config_init		= 0x80000eb9,
 	.sdram_config			= 0x80001ab9,
 	.ref_ctrl			= 0x0000030c,
@@ -46,7 +46,7 @@ static const struct emif_regs emif_regs_elpida_200_mhz_2cs = {
 	.emif_ddr_phy_ctlr_1		= 0x049ff808
 };
 
-static const struct emif_regs emif_regs_elpida_380_mhz_1cs = {
+const struct emif_regs emif_regs_elpida_380_mhz_1cs = {
 	.sdram_config_init		= 0x80000eb1,
 	.sdram_config			= 0x80001ab1,
 	.ref_ctrl			= 0x000005cd,
@@ -321,3 +321,8 @@ void get_lpddr2_mr_regs(const struct lpddr2_mr_regs **regs)
 {
 	*regs = &mr_regs;
 }
+
+__weak const struct read_write_regs *get_bug_regs(u32 *iterations)
+{
+	return 0;
+}
diff --git a/arch/arm/cpu/armv7/omap5/hw_data.c b/arch/arm/cpu/armv7/omap5/hw_data.c
index a1b249e734..82910e87a0 100644
--- a/arch/arm/cpu/armv7/omap5/hw_data.c
+++ b/arch/arm/cpu/armv7/omap5/hw_data.c
@@ -600,6 +600,7 @@ const struct ctrl_ioregs ioregs_omap5432_es1 = {
 	.ctrl_ddrio_1 = DDR_IO_1_VREF_CELLS_DDR3_VALUE,
 	.ctrl_ddrio_2 = DDR_IO_2_VREF_CELLS_DDR3_VALUE,
 	.ctrl_emif_sdram_config_ext = SDRAM_CONFIG_EXT_RD_LVL_11_SAMPLES,
+	.ctrl_emif_sdram_config_ext_final = SDRAM_CONFIG_EXT_RD_LVL_4_SAMPLES,
 };
 
 const struct ctrl_ioregs ioregs_omap5432_es2 = {
@@ -610,16 +611,18 @@ const struct ctrl_ioregs ioregs_omap5432_es2 = {
 	.ctrl_ddrio_1 = DDR_IO_1_VREF_CELLS_DDR3_VALUE_ES2,
 	.ctrl_ddrio_2 = DDR_IO_2_VREF_CELLS_DDR3_VALUE_ES2,
 	.ctrl_emif_sdram_config_ext = SDRAM_CONFIG_EXT_RD_LVL_11_SAMPLES,
+	.ctrl_emif_sdram_config_ext_final = SDRAM_CONFIG_EXT_RD_LVL_4_SAMPLES,
 };
 
 const struct ctrl_ioregs ioregs_dra7xx_es1 = {
 	.ctrl_ddrch = 0x40404040,
 	.ctrl_lpddr2ch = 0x40404040,
 	.ctrl_ddr3ch = 0x80808080,
-	.ctrl_ddrio_0 = 0xbae8c631,
-	.ctrl_ddrio_1 = 0xb46318d8,
+	.ctrl_ddrio_0 = 0xA2084210,
+	.ctrl_ddrio_1 = 0x84210840,
 	.ctrl_ddrio_2 = 0x84210000,
-	.ctrl_emif_sdram_config_ext = 0xb2c00000,
+	.ctrl_emif_sdram_config_ext = 0x0001C1A7,
+	.ctrl_emif_sdram_config_ext_final = 0x000101A7,
 	.ctrl_ddr_ctrl_ext_0 = 0xA2000000,
 };
 
diff --git a/arch/arm/cpu/armv7/omap5/hwinit.c b/arch/arm/cpu/armv7/omap5/hwinit.c
index 1065891ae1..5386ae0568 100644
--- a/arch/arm/cpu/armv7/omap5/hwinit.c
+++ b/arch/arm/cpu/armv7/omap5/hwinit.c
@@ -168,12 +168,6 @@ void do_io_settings(void)
 		io_settings_lpddr2();
 	else
 		io_settings_ddr3();
-
-	/* Efuse settings */
-	writel(EFUSE_1, (*ctrl)->control_efuse_1);
-	writel(EFUSE_2, (*ctrl)->control_efuse_2);
-	writel(EFUSE_3, (*ctrl)->control_efuse_3);
-	writel(EFUSE_4, (*ctrl)->control_efuse_4);
 }
 
 static const struct srcomp_params srcomp_parameters[NUM_SYS_CLKS] = {
@@ -297,13 +291,17 @@ void srcomp_enable(void)
 
 void config_data_eye_leveling_samples(u32 emif_base)
 {
+	const struct ctrl_ioregs *ioregs;
+
+	get_ioregs(&ioregs);
+
 	/*EMIF_SDRAM_CONFIG_EXT-Read data eye leveling no of samples =4*/
 	if (emif_base == EMIF1_BASE)
-		writel(SDRAM_CONFIG_EXT_RD_LVL_4_SAMPLES,
-			(*ctrl)->control_emif1_sdram_config_ext);
+		writel(ioregs->ctrl_emif_sdram_config_ext_final,
+		       (*ctrl)->control_emif1_sdram_config_ext);
 	else if (emif_base == EMIF2_BASE)
-		writel(SDRAM_CONFIG_EXT_RD_LVL_4_SAMPLES,
-			(*ctrl)->control_emif2_sdram_config_ext);
+		writel(ioregs->ctrl_emif_sdram_config_ext_final,
+		       (*ctrl)->control_emif2_sdram_config_ext);
 }
 
 void init_omap_revision(void)
diff --git a/arch/arm/cpu/armv7/omap5/prcm-regs.c b/arch/arm/cpu/armv7/omap5/prcm-regs.c
index 304ac1c173..77c428b535 100644
--- a/arch/arm/cpu/armv7/omap5/prcm-regs.c
+++ b/arch/arm/cpu/armv7/omap5/prcm-regs.c
@@ -203,8 +203,10 @@ struct prcm_regs const omap5_es1_prcm = {
 	.cm_l3init_hsusbotg_clkctrl = 0x4a009360,
 	.cm_l3init_hsusbtll_clkctrl = 0x4a009368,
 	.cm_l3init_p1500_clkctrl = 0x4a009378,
+	.cm_l3init_sata_clkctrl = 0x4a009388,
 	.cm_l3init_fsusb_clkctrl = 0x4a0093d0,
 	.cm_l3init_ocp2scp1_clkctrl = 0x4a0093e0,
+	.cm_l3init_ocp2scp3_clkctrl = 0x4a0093e8,
 
 	/* cm2.l4per */
 	.cm_l4per_clkstctrl = 0x4a009400,
@@ -296,6 +298,7 @@ struct omap_sys_ctrl_regs const omap5_ctrl = {
 	.control_status				= 0x4A002134,
 	.control_std_fuse_opp_vdd_mpu_2		= 0x4A0021B4,
 	.control_phy_power_usb 			= 0x4A002370,
+	.control_phy_power_sata			= 0x4A002374,
 	.control_padconf_core_base		= 0x4A002800,
 	.control_paconf_global			= 0x4A002DA0,
 	.control_paconf_mode			= 0x4A002DA4,
@@ -373,6 +376,7 @@ struct omap_sys_ctrl_regs const omap5_ctrl = {
 
 struct omap_sys_ctrl_regs const dra7xx_ctrl = {
 	.control_status				= 0x4A002134,
+	.control_phy_power_sata			= 0x4A002374,
 	.control_core_mac_id_0_lo		= 0x4A002514,
 	.control_core_mac_id_0_hi		= 0x4A002518,
 	.control_core_mac_id_1_lo		= 0x4A00251C,
@@ -698,6 +702,7 @@ struct prcm_regs const omap5_es2_prcm = {
 	.cm_l3init_hsusbotg_clkctrl = 0x4a009660,
 	.cm_l3init_hsusbtll_clkctrl = 0x4a009668,
 	.cm_l3init_p1500_clkctrl = 0x4a009678,
+	.cm_l3init_sata_clkctrl = 0x4a009688,
 	.cm_l3init_fsusb_clkctrl = 0x4a0096d0,
 	.cm_l3init_ocp2scp1_clkctrl = 0x4a0096e0,
 	.cm_l3init_ocp2scp3_clkctrl = 0x4a0096e8,
@@ -891,9 +896,11 @@ struct prcm_regs const dra7xx_prcm = {
 	.cm_l3init_hsusbhost_clkctrl		= 0x4a009340,
 	.cm_l3init_hsusbotg_clkctrl		= 0x4a009348,
 	.cm_l3init_hsusbtll_clkctrl		= 0x4a009350,
+	.cm_l3init_sata_clkctrl			= 0x4a009388,
 	.cm_gmac_clkstctrl			= 0x4a0093c0,
 	.cm_gmac_gmac_clkctrl			= 0x4a0093d0,
 	.cm_l3init_ocp2scp1_clkctrl		= 0x4a0093e0,
+	.cm_l3init_ocp2scp3_clkctrl		= 0x4a0093e8,
 
 	/* cm2.l4per */
 	.cm_l4per_clkstctrl			= 0x4a009700,
diff --git a/arch/arm/cpu/armv7/omap5/sdram.c b/arch/arm/cpu/armv7/omap5/sdram.c
index e65c1160e2..2e1870609a 100644
--- a/arch/arm/cpu/armv7/omap5/sdram.c
+++ b/arch/arm/cpu/armv7/omap5/sdram.c
@@ -148,13 +148,13 @@ const struct emif_regs emif_1_regs_ddr3_532_mhz_1cs_dra_es1 = {
 	.read_idle_ctrl                 = 0x00050000,
 	.zq_config                      = 0x0007190B,
 	.temp_alert_config              = 0x00000000,
-	.emif_ddr_phy_ctlr_1_init       = 0x0E20400A,
-	.emif_ddr_phy_ctlr_1            = 0x0E24400A,
-	.emif_ddr_ext_phy_ctrl_1        = 0x04040100,
-	.emif_ddr_ext_phy_ctrl_2        = 0x009E009E,
-	.emif_ddr_ext_phy_ctrl_3        = 0x009E009E,
-	.emif_ddr_ext_phy_ctrl_4        = 0x009E009E,
-	.emif_ddr_ext_phy_ctrl_5        = 0x009E009E,
+	.emif_ddr_phy_ctlr_1_init       = 0x0024400A,
+	.emif_ddr_phy_ctlr_1            = 0x0024400A,
+	.emif_ddr_ext_phy_ctrl_1        = 0x10040100,
+	.emif_ddr_ext_phy_ctrl_2        = 0x00B000B0,
+	.emif_ddr_ext_phy_ctrl_3        = 0x00B000B0,
+	.emif_ddr_ext_phy_ctrl_4        = 0x00B000B0,
+	.emif_ddr_ext_phy_ctrl_5        = 0x00B000B0,
 	.emif_rd_wr_lvl_rmp_win         = 0x00000000,
 	.emif_rd_wr_lvl_rmp_ctl         = 0x80000000,
 	.emif_rd_wr_lvl_ctl             = 0x00000000,
@@ -172,13 +172,13 @@ const struct emif_regs emif_2_regs_ddr3_532_mhz_1cs_dra_es1 = {
 	.read_idle_ctrl                 = 0x00050000,
 	.zq_config                      = 0x0007190B,
 	.temp_alert_config              = 0x00000000,
-	.emif_ddr_phy_ctlr_1_init       = 0x0020400A,
-	.emif_ddr_phy_ctlr_1            = 0x0E24400A,
-	.emif_ddr_ext_phy_ctrl_1        = 0x04040100,
-	.emif_ddr_ext_phy_ctrl_2        = 0x009D009D,
-	.emif_ddr_ext_phy_ctrl_3        = 0x009D009D,
-	.emif_ddr_ext_phy_ctrl_4        = 0x009D009D,
-	.emif_ddr_ext_phy_ctrl_5        = 0x009D009D,
+	.emif_ddr_phy_ctlr_1_init       = 0x0024400A,
+	.emif_ddr_phy_ctlr_1            = 0x0024400A,
+	.emif_ddr_ext_phy_ctrl_1        = 0x10040100,
+	.emif_ddr_ext_phy_ctrl_2        = 0x00B000B0,
+	.emif_ddr_ext_phy_ctrl_3        = 0x00B000B0,
+	.emif_ddr_ext_phy_ctrl_4        = 0x00B000B0,
+	.emif_ddr_ext_phy_ctrl_5        = 0x00B000B0,
 	.emif_rd_wr_lvl_rmp_win         = 0x00000000,
 	.emif_rd_wr_lvl_rmp_ctl         = 0x80000000,
 	.emif_rd_wr_lvl_ctl             = 0x00000000,
@@ -306,7 +306,7 @@ void emif_get_device_details(u32 emif_nr,
 
 #endif /* CONFIG_SYS_EMIF_PRECALCULATED_TIMING_REGS */
 
-const u32 ext_phy_ctrl_const_base[EMIF_EXT_PHY_CTRL_CONST_REG] = {
+const u32 ext_phy_ctrl_const_base[] = {
 	0x01004010,
 	0x00001004,
 	0x04010040,
@@ -329,7 +329,7 @@ const u32 ext_phy_ctrl_const_base[EMIF_EXT_PHY_CTRL_CONST_REG] = {
 	0x0
 };
 
-const u32 ddr3_ext_phy_ctrl_const_base_es1[EMIF_EXT_PHY_CTRL_CONST_REG] = {
+const u32 ddr3_ext_phy_ctrl_const_base_es1[] = {
 	0x01004010,
 	0x00001004,
 	0x04010040,
@@ -352,7 +352,7 @@ const u32 ddr3_ext_phy_ctrl_const_base_es1[EMIF_EXT_PHY_CTRL_CONST_REG] = {
 	0x0
 };
 
-const u32 ddr3_ext_phy_ctrl_const_base_es2[EMIF_EXT_PHY_CTRL_CONST_REG] = {
+const u32 ddr3_ext_phy_ctrl_const_base_es2[] = {
 	0x50D4350D,
 	0x00000D43,
 	0x04010040,
@@ -376,51 +376,61 @@ const u32 ddr3_ext_phy_ctrl_const_base_es2[EMIF_EXT_PHY_CTRL_CONST_REG] = {
 };
 
 const u32
-dra_ddr3_ext_phy_ctrl_const_base_es1_emif1[EMIF_EXT_PHY_CTRL_CONST_REG] = {
-	0x009E009E,
-	0x002E002E,
-	0x002E002E,
-	0x002E002E,
-	0x002E002E,
-	0x002E002E,
-	0x004D004D,
-	0x004D004D,
-	0x004D004D,
-	0x004D004D,
-	0x004D004D,
-	0x004D004D,
-	0x004D004D,
-	0x004D004D,
-	0x004D004D,
-	0x004D004D,
-	0x0,
-	0x600020,
+dra_ddr3_ext_phy_ctrl_const_base_es1_emif1[] = {
+	0x00B000B0,
+	0x00400040,
+	0x00400040,
+	0x00400040,
+	0x00400040,
+	0x00400040,
+	0x00800080,
+	0x00800080,
+	0x00800080,
+	0x00800080,
+	0x00800080,
+	0x00600060,
+	0x00600060,
+	0x00600060,
+	0x00600060,
+	0x00600060,
+	0x00800080,
+	0x00800080,
 	0x40010080,
-	0x8102040
+	0x08102040,
+	0x0,
+	0x0,
+	0x0,
+	0x0,
+	0x0
 };
 
 const u32
-dra_ddr3_ext_phy_ctrl_const_base_es1_emif2[EMIF_EXT_PHY_CTRL_CONST_REG] = {
-	0x009D009D,
-	0x002D002D,
-	0x002D002D,
-	0x002D002D,
-	0x002D002D,
-	0x002D002D,
-	0x00570057,
-	0x00570057,
-	0x00570057,
-	0x00570057,
-	0x00570057,
-	0x00570057,
-	0x00570057,
-	0x00570057,
-	0x00570057,
-	0x00570057,
+dra_ddr3_ext_phy_ctrl_const_base_es1_emif2[] = {
+	0x00BB00BB,
+	0x00440044,
+	0x00440044,
+	0x00440044,
+	0x00440044,
+	0x00440044,
+	0x007F007F,
+	0x007F007F,
+	0x007F007F,
+	0x007F007F,
+	0x007F007F,
+	0x00600060,
+	0x00600060,
+	0x00600060,
+	0x00600060,
+	0x00600060,
 	0x0,
-	0x600020,
+	0x00600020,
 	0x40010080,
-	0x8102040
+	0x08102040,
+	0x0,
+	0x0,
+	0x0,
+	0x0,
+	0x0
 };
 
 const struct lpddr2_mr_regs mr_regs = {
@@ -431,27 +441,38 @@ const struct lpddr2_mr_regs mr_regs = {
 	.mr16	= MR16_REF_FULL_ARRAY
 };
 
-static void emif_get_ext_phy_ctrl_const_regs(u32 emif_nr, const u32 **regs)
+static void emif_get_ext_phy_ctrl_const_regs(u32 emif_nr,
+					     const u32 **regs,
+					     u32 *size)
 {
 	switch (omap_revision()) {
 	case OMAP5430_ES1_0:
 	case OMAP5430_ES2_0:
 		*regs = ext_phy_ctrl_const_base;
+		*size = ARRAY_SIZE(ext_phy_ctrl_const_base);
 		break;
 	case OMAP5432_ES1_0:
 		*regs = ddr3_ext_phy_ctrl_const_base_es1;
+		*size = ARRAY_SIZE(ddr3_ext_phy_ctrl_const_base_es1);
 		break;
 	case OMAP5432_ES2_0:
 		*regs = ddr3_ext_phy_ctrl_const_base_es2;
+		*size = ARRAY_SIZE(ddr3_ext_phy_ctrl_const_base_es2);
 		break;
 	case DRA752_ES1_0:
-		if (emif_nr == 1)
+		if (emif_nr == 1) {
 			*regs = dra_ddr3_ext_phy_ctrl_const_base_es1_emif1;
-		else
+			*size =
+			ARRAY_SIZE(dra_ddr3_ext_phy_ctrl_const_base_es1_emif1);
+		} else {
 			*regs = dra_ddr3_ext_phy_ctrl_const_base_es1_emif2;
+			*size =
+			ARRAY_SIZE(dra_ddr3_ext_phy_ctrl_const_base_es1_emif2);
+		}
 		break;
 	default:
 		*regs = ddr3_ext_phy_ctrl_const_base_es2;
+		*size = ARRAY_SIZE(ddr3_ext_phy_ctrl_const_base_es2);
 
 	}
 }
@@ -468,6 +489,7 @@ void do_ext_phy_settings(u32 base, const struct emif_regs *regs)
 	u32 emif_nr;
 	const u32 *ext_phy_ctrl_const_regs;
 	u32 i = 0;
+	u32 size;
 
 	emif_nr = (base == EMIF1_BASE) ? 1 : 2;
 
@@ -487,8 +509,10 @@ void do_ext_phy_settings(u32 base, const struct emif_regs *regs)
 	 * external phy 6-24 registers do not change with
 	 * ddr frequency
 	 */
-	emif_get_ext_phy_ctrl_const_regs(emif_nr, &ext_phy_ctrl_const_regs);
-	for (i = 0; i < EMIF_EXT_PHY_CTRL_CONST_REG; i++) {
+	emif_get_ext_phy_ctrl_const_regs(emif_nr,
+					 &ext_phy_ctrl_const_regs, &size);
+
+	for (i = 0; i < size; i++) {
 		writel(ext_phy_ctrl_const_regs[i],
 		       emif_ext_phy_ctrl_base++);
 		/* Update shadow registers */
@@ -545,6 +569,74 @@ static const struct lpddr2_device_timings dev_4G_S4_timings = {
 	.min_tck	= &min_tck,
 };
 
+/*
+ * List of status registers to be controlled back to control registers
+ * after initial leveling
+ * readreg, writereg
+ */
+const struct read_write_regs omap5_bug_00339_regs[] = {
+	{ 8,  5 },
+	{ 9,  6 },
+	{ 10, 7 },
+	{ 14, 8 },
+	{ 15, 9 },
+	{ 16, 10 },
+	{ 11, 2 },
+	{ 12, 3 },
+	{ 13, 4 },
+	{ 17, 11 },
+	{ 18, 12 },
+	{ 19, 13 },
+};
+
+const struct read_write_regs dra_bug_00339_regs[] = {
+	{ 7,  7 },
+	{ 8,  8 },
+	{ 9,  9 },
+	{ 10, 10 },
+	{ 11, 11 },
+	{ 12, 2 },
+	{ 13, 3 },
+	{ 14, 4 },
+	{ 15, 5 },
+	{ 16, 6 },
+	{ 17, 12 },
+	{ 18, 13 },
+	{ 19, 14 },
+	{ 20, 15 },
+	{ 21, 16 },
+	{ 22, 17 },
+	{ 23, 18 },
+	{ 24, 19 },
+	{ 25, 20 },
+	{ 26, 21}
+};
+
+const struct read_write_regs *get_bug_regs(u32 *iterations)
+{
+	const struct read_write_regs *bug_00339_regs_ptr = NULL;
+
+	switch (omap_revision()) {
+	case OMAP5430_ES1_0:
+	case OMAP5430_ES2_0:
+	case OMAP5432_ES1_0:
+	case OMAP5432_ES2_0:
+		bug_00339_regs_ptr = omap5_bug_00339_regs;
+		*iterations = sizeof(omap5_bug_00339_regs)/
+			     sizeof(omap5_bug_00339_regs[0]);
+		break;
+	case DRA752_ES1_0:
+		bug_00339_regs_ptr = dra_bug_00339_regs;
+		*iterations = sizeof(dra_bug_00339_regs)/
+			     sizeof(dra_bug_00339_regs[0]);
+		break;
+	default:
+		printf("\n Error: UnKnown SOC");
+	}
+
+	return bug_00339_regs_ptr;
+}
+
 void emif_get_device_timings_sdp(u32 emif_nr,
 		const struct lpddr2_device_timings **cs0_device_timings,
 		const struct lpddr2_device_timings **cs1_device_timings)
diff --git a/arch/arm/cpu/armv7/rmobile/Makefile b/arch/arm/cpu/armv7/rmobile/Makefile
index 5e296c4208..22219990dd 100644
--- a/arch/arm/cpu/armv7/rmobile/Makefile
+++ b/arch/arm/cpu/armv7/rmobile/Makefile
@@ -5,14 +5,13 @@
 # SPDX-License-Identifier:	GPL-2.0+
 #
 
-obj-y = lowlevel_init.o
-obj-y += cpu_info.o
+obj-y = cpu_info.o
 obj-y += emac.o
 
 obj-$(CONFIG_DISPLAY_BOARDINFO) += board.o
 obj-$(CONFIG_GLOBAL_TIMER) += timer.o
-obj-$(CONFIG_R8A7740) += cpu_info-r8a7740.o
-obj-$(CONFIG_R8A7740) += pfc-r8a7740.o
-obj-$(CONFIG_SH73A0) += cpu_info-sh73a0.o
-obj-$(CONFIG_SH73A0) += pfc-sh73a0.o
+obj-$(CONFIG_R8A7740) += lowlevel_init.o cpu_info-r8a7740.o pfc-r8a7740.o
+obj-$(CONFIG_R8A7790) += lowlevel_init_ca15.o cpu_info-r8a7790.o pfc-r8a7790.o
+obj-$(CONFIG_R8A7791) += lowlevel_init_ca15.o cpu_info-r8a7791.o pfc-r8a7791.o
+obj-$(CONFIG_SH73A0) += lowlevel_init.o cpu_info-sh73a0.o pfc-sh73a0.o
 obj-$(CONFIG_TMU_TIMER) += ../../../../sh/lib/time.o
diff --git a/arch/arm/cpu/armv7/rmobile/config.mk b/arch/arm/cpu/armv7/rmobile/config.mk
deleted file mode 100644
index 3a36ab65e1..0000000000
--- a/arch/arm/cpu/armv7/rmobile/config.mk
+++ /dev/null
@@ -1,9 +0,0 @@
-#
-# (C) Copyright 2002
-# Gary Jennejohn, DENX Software Engineering, <garyj@denx.de>
-#
-# SPDX-License-Identifier:	GPL-2.0+
-#
-
-# Make ARMv5 to allow more compilers to work, even though its v7a.
-PLATFORM_CPPFLAGS += -march=armv5
diff --git a/arch/arm/cpu/armv7/rmobile/cpu_info-r8a7790.c b/arch/arm/cpu/armv7/rmobile/cpu_info-r8a7790.c
new file mode 100644
index 0000000000..7232e23774
--- /dev/null
+++ b/arch/arm/cpu/armv7/rmobile/cpu_info-r8a7790.c
@@ -0,0 +1,22 @@
+/*
+ * arch/arm/cpu/armv7/rmobile/cpu_info-r8a7790.c
+ *     This file is r8a7790 processor support.
+ *
+ * Copyright (C) 2013 Renesas Electronics Corporation
+ *
+ * SPDX-License-Identifier: GPL-2.0
+ */
+#include <common.h>
+#include <asm/io.h>
+
+#define PRR 0xFF000044
+
+u32 rmobile_get_cpu_type(void)
+{
+	return (readl(PRR) & 0x00007F00) >> 8;
+}
+
+u32 rmobile_get_cpu_rev_integer(void)
+{
+	return (readl(PRR) & 0x000000F0) >> 4;
+}
diff --git a/arch/arm/cpu/armv7/rmobile/cpu_info-r8a7791.c b/arch/arm/cpu/armv7/rmobile/cpu_info-r8a7791.c
new file mode 100644
index 0000000000..2de58ed273
--- /dev/null
+++ b/arch/arm/cpu/armv7/rmobile/cpu_info-r8a7791.c
@@ -0,0 +1,29 @@
+/*
+ * arch/arm/cpu/armv7/rmobile/cpu_info-r8a7791.c
+ *
+ * Copyright (C) 2013 Renesas Electronics Corporation
+ *
+ * SPDX-License-Identifier: GPL-2.0
+ */
+#include <common.h>
+#include <asm/io.h>
+
+#define PRR 0xFF000044
+
+u32 rmobile_get_cpu_type(void)
+{
+	u32 product;
+
+	product = readl(PRR);
+
+	return (u32)((product & 0x00007F00) >> 8);
+}
+
+u32 rmobile_get_cpu_rev_integer(void)
+{
+	u32 product;
+
+	product = readl(PRR);
+
+	return (u32)((product & 0x000000F0) >> 4);
+}
diff --git a/arch/arm/cpu/armv7/rmobile/cpu_info.c b/arch/arm/cpu/armv7/rmobile/cpu_info.c
index 07a33fb2ae..83d5282e3e 100644
--- a/arch/arm/cpu/armv7/rmobile/cpu_info.c
+++ b/arch/arm/cpu/armv7/rmobile/cpu_info.c
@@ -58,6 +58,16 @@ int print_cpuinfo(void)
 		       rmobile_get_cpu_rev_fraction());
 		break;
 
+	case 0x45:
+		printf("CPU: Renesas Electronics R8A7790 rev %d\n",
+		       rmobile_get_cpu_rev_integer());
+		break;
+
+	case 0x47:
+		printf("CPU: Renesas Electronics R8A7791 rev %d\n",
+			rmobile_get_cpu_rev_integer());
+		break;
+
 	default:
 		printf("CPU: Renesas Electronics CPU rev %d.%d\n",
 		       rmobile_get_cpu_rev_integer(),
diff --git a/arch/arm/cpu/armv7/rmobile/lowlevel_init_ca15.S b/arch/arm/cpu/armv7/rmobile/lowlevel_init_ca15.S
new file mode 100644
index 0000000000..e07cc8093a
--- /dev/null
+++ b/arch/arm/cpu/armv7/rmobile/lowlevel_init_ca15.S
@@ -0,0 +1,60 @@
+/*
+ * arch/arm/cpu/armv7/rmobile/lowlevel_init_ca15.S
+ *     This file is lager low level initialize.
+ *
+ * Copyright (C) 2013 Renesas Electronics Corporation
+ *
+ * SPDX-License-Identifier: GPL-2.0
+ */
+
+#include <config.h>
+#include <linux/linkage.h>
+
+ENTRY(lowlevel_init)
+	mrc	p15, 0, r4, c0, c0, 5 /* mpidr */
+	orr	r4, r4, r4, lsr #6
+	and	r4, r4, #7 /* id 0-3 = ca15.0,1,2,3 */
+
+	b do_lowlevel_init
+
+	.pool
+
+/*
+ * CPU ID #1-#3 come here
+ */
+	.align  4
+do_cpu_waiting:
+	ldr	r1, =0xe6180000 /* sysc */
+1:	ldr	r0, [r1, #0x20] /* sbar */
+	tst	r0, r0
+	beq	1b
+	bx	r0
+
+/*
+ * Only CPU ID #0 comes here
+ */
+	.align  4
+do_lowlevel_init:
+	/* surpress wfe if ca15 */
+	tst	r4, #4
+	mrceq p15, 0, r0, c1, c0, 1	/* actlr */
+	orreq r0, r0, #(1<<7)
+	mcreq p15, 0, r0, c1, c0, 1
+	/* and set l2 latency */
+	mrceq p15, 1, r0, c9, c0, 2	/* l2ctlr */
+	orreq r0, r0, #0x00000800
+	orreq r0, r0, #0x00000003
+	mcreq p15, 1, r0, c9, c0, 2
+
+	ldr	r3, =(CONFIG_SYS_INIT_SP_ADDR)
+	sub	sp, r3, #4
+	str	lr, [sp]
+
+	/* initialize system */
+	bl s_init
+
+	ldr	lr, [sp]
+	mov	pc, lr
+	nop
+ENDPROC(lowlevel_init)
+	.ltorg
diff --git a/arch/arm/cpu/armv7/rmobile/pfc-r8a7790.c b/arch/arm/cpu/armv7/rmobile/pfc-r8a7790.c
new file mode 100644
index 0000000000..1259062a64
--- /dev/null
+++ b/arch/arm/cpu/armv7/rmobile/pfc-r8a7790.c
@@ -0,0 +1,829 @@
+/*
+ * arch/arm/cpu/armv7/rmobile/pfc-r8a7790.c
+ *     This file is r8a7790 processor support - PFC hardware block.
+ *
+ * Copy from linux-kernel:drivers/pinctrl/sh-pfc/pfc-r8a7790.c
+ *
+ * Copyright (C) 2013 Renesas Electronics Corporation
+ * Copyright (C) 2013 Magnus Damm
+ * Copyright (C) 2012 Renesas Solutions Corp.
+ * Copyright (C) 2012 Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0
+ */
+
+#include <common.h>
+#include <sh_pfc.h>
+#include <asm/gpio.h>
+#include "pfc-r8a7790.h"
+
+enum {
+	PINMUX_RESERVED = 0,
+
+	PINMUX_DATA_BEGIN,
+	GP_ALL(DATA),
+	PINMUX_DATA_END,
+
+	PINMUX_INPUT_BEGIN,
+	GP_ALL(IN),
+	PINMUX_INPUT_END,
+
+	PINMUX_OUTPUT_BEGIN,
+	GP_ALL(OUT),
+	PINMUX_OUTPUT_END,
+
+	PINMUX_FUNCTION_BEGIN,
+	GP_ALL(FN),
+
+	/* GPSR0 */
+	FN_IP0_2_0, FN_IP0_5_3, FN_IP0_8_6, FN_IP0_11_9, FN_IP0_15_12,
+	FN_IP0_19_16, FN_IP0_22_20, FN_IP0_26_23, FN_IP0_30_27,
+	FN_IP1_3_0, FN_IP1_7_4, FN_IP1_11_8, FN_IP1_14_12,
+	FN_IP1_17_15, FN_IP1_21_18, FN_IP1_25_22, FN_IP1_27_26,
+	FN_IP1_29_28, FN_IP2_2_0, FN_IP2_5_3, FN_IP2_8_6, FN_IP2_11_9,
+	FN_IP2_14_12, FN_IP2_17_15, FN_IP2_21_18, FN_IP2_25_22,
+	FN_IP2_28_26, FN_IP3_3_0, FN_IP3_7_4, FN_IP3_11_8,
+	FN_IP3_14_12, FN_IP3_17_15,
+
+	/* GPSR1 */
+	FN_IP3_19_18, FN_IP3_22_20, FN_IP3_25_23, FN_IP3_28_26,
+	FN_IP3_31_29, FN_IP4_2_0, FN_IP4_5_3, FN_IP4_8_6, FN_IP4_11_9,
+	FN_IP4_14_12, FN_IP4_17_15, FN_IP4_20_18, FN_IP4_23_21,
+	FN_IP4_26_24, FN_IP4_29_27, FN_IP5_2_0, FN_IP5_5_3, FN_IP5_9_6,
+	FN_IP5_12_10, FN_IP5_14_13, FN_IP5_17_15, FN_IP5_20_18,
+	FN_IP5_23_21, FN_IP5_26_24, FN_IP5_29_27, FN_IP6_2_0,
+	FN_IP6_5_3, FN_IP6_8_6, FN_IP6_10_9, FN_IP6_13_11,
+
+	/* GPSR2 */
+	FN_IP7_28_27, FN_IP7_30_29, FN_IP8_1_0, FN_IP8_3_2, FN_IP8_5_4,
+	FN_IP8_7_6, FN_IP8_9_8, FN_IP8_11_10, FN_IP8_13_12, FN_IP8_15_14,
+	FN_IP8_17_16, FN_IP8_19_18, FN_IP8_21_20, FN_IP8_23_22,
+	FN_IP8_25_24, FN_IP8_26, FN_IP8_27, FN_VI1_DATA7_VI1_B7,
+	FN_IP6_16_14, FN_IP6_19_17, FN_IP6_22_20, FN_IP6_25_23,
+	FN_IP6_28_26, FN_IP6_31_29, FN_IP7_2_0, FN_IP7_5_3, FN_IP7_7_6,
+	FN_IP7_9_8, FN_IP7_12_10, FN_IP7_15_13,
+
+	/* GPSR3 */
+	FN_IP8_28, FN_IP8_30_29, FN_IP9_1_0, FN_IP9_3_2, FN_IP9_5_4,
+	FN_IP9_7_6, FN_IP9_11_8, FN_IP9_15_12, FN_IP9_17_16, FN_IP9_19_18,
+	FN_IP9_21_20, FN_IP9_23_22, FN_IP9_25_24, FN_IP9_27_26,
+	FN_IP9_31_28, FN_IP10_3_0, FN_IP10_6_4, FN_IP10_10_7, FN_IP10_14_11,
+	FN_IP10_18_15, FN_IP10_22_19, FN_IP10_25_23, FN_IP10_29_26,
+	FN_IP11_3_0, FN_IP11_4, FN_IP11_6_5, FN_IP11_8_7, FN_IP11_10_9,
+	FN_IP11_12_11, FN_IP11_14_13, FN_IP11_17_15, FN_IP11_21_18,
+
+	/* GPSR4 */
+	FN_IP11_23_22, FN_IP11_26_24, FN_IP11_29_27, FN_IP11_31_30,
+	FN_IP12_1_0, FN_IP12_3_2, FN_IP12_5_4, FN_IP12_7_6, FN_IP12_10_8,
+	FN_IP12_13_11, FN_IP12_16_14, FN_IP12_19_17, FN_IP12_22_20,
+	FN_IP12_24_23, FN_IP12_27_25, FN_IP12_30_28, FN_IP13_2_0,
+	FN_IP13_6_3, FN_IP13_9_7, FN_IP13_12_10, FN_IP13_15_13,
+	FN_IP13_18_16, FN_IP13_22_19, FN_IP13_25_23, FN_IP13_28_26,
+	FN_IP13_30_29, FN_IP14_2_0, FN_IP14_5_3, FN_IP14_8_6, FN_IP14_11_9,
+	FN_IP14_15_12, FN_IP14_18_16,
+
+	/* GPSR5 */
+	FN_IP14_21_19, FN_IP14_24_22, FN_IP14_27_25, FN_IP14_30_28,
+	FN_IP15_2_0, FN_IP15_5_3, FN_IP15_8_6, FN_IP15_11_9, FN_IP15_13_12,
+	FN_IP15_15_14, FN_IP15_17_16, FN_IP15_19_18, FN_IP15_22_20,
+	FN_IP15_25_23, FN_IP15_27_26, FN_IP15_29_28, FN_IP16_2_0,
+	FN_IP16_5_3, FN_USB0_PWEN, FN_USB0_OVC_VBUS, FN_IP16_6, FN_IP16_7,
+	FN_USB2_PWEN, FN_USB2_OVC, FN_AVS1, FN_AVS2, FN_DU_DOTCLKIN0,
+	FN_IP7_26_25, FN_DU_DOTCLKIN2, FN_IP7_18_16, FN_IP7_21_19, FN_IP7_24_22,
+
+	/* IPSR0 - IPSR5 */
+	/* IPSR6 */
+	FN_DACK0, FN_IRQ0, FN_INTC_IRQ0_N, FN_SSI_SCK6_B,
+	FN_VI1_VSYNC_N, FN_VI1_VSYNC_N_B, FN_SSI_WS78_C,
+	FN_DREQ1_N, FN_VI1_CLKENB, FN_VI1_CLKENB_B,
+	FN_SSI_SDATA7_C, FN_SSI_SCK78_B, FN_DACK1, FN_IRQ1,
+	FN_INTC_IRQ1_N, FN_SSI_WS6_B, FN_SSI_SDATA8_C,
+	FN_DREQ2_N, FN_HSCK1_B, FN_HCTS0_N_B,
+	FN_MSIOF0_TXD_B, FN_DACK2, FN_IRQ2, FN_INTC_IRQ2_N,
+	FN_SSI_SDATA6_B, FN_HRTS0_N_B, FN_MSIOF0_RXD_B,
+	FN_ETH_CRS_DV, FN_RMII_CRS_DV, FN_STP_ISCLK_0_B,
+	FN_TS_SDEN0_D, FN_GLO_Q0_C, FN_SCL2_E,
+	FN_SCL2_CIS_E, FN_ETH_RX_ER, FN_RMII_RX_ER,
+	FN_STP_ISD_0_B, FN_TS_SPSYNC0_D, FN_GLO_Q1_C,
+	FN_SDA2_E, FN_SDA2_CIS_E, FN_ETH_RXD0, FN_RMII_RXD0,
+	FN_STP_ISEN_0_B, FN_TS_SDAT0_D, FN_GLO_I0_C,
+	FN_SCIFB1_SCK_G, FN_SCK1_E, FN_ETH_RXD1,
+	FN_RMII_RXD1, FN_HRX0_E, FN_STP_ISSYNC_0_B,
+	FN_TS_SCK0_D, FN_GLO_I1_C, FN_SCIFB1_RXD_G,
+	FN_RX1_E, FN_ETH_LINK, FN_RMII_LINK, FN_HTX0_E,
+	FN_STP_IVCXO27_0_B, FN_SCIFB1_TXD_G, FN_TX1_E,
+	FN_ETH_REF_CLK, FN_RMII_REF_CLK, FN_HCTS0_N_E,
+	FN_STP_IVCXO27_1_B, FN_HRX0_F,
+
+	/* IPSR7 */
+	FN_ETH_MDIO, FN_RMII_MDIO, FN_HRTS0_N_E,
+	FN_SIM0_D_C, FN_HCTS0_N_F, FN_ETH_TXD1,
+	FN_RMII_TXD1, FN_HTX0_F, FN_BPFCLK_G, FN_RDS_CLK_F,
+	FN_ETH_TX_EN, FN_RMII_TX_EN, FN_SIM0_CLK_C,
+	FN_HRTS0_N_F, FN_ETH_MAGIC, FN_RMII_MAGIC,
+	FN_SIM0_RST_C, FN_ETH_TXD0, FN_RMII_TXD0,
+	FN_STP_ISCLK_1_B, FN_TS_SDEN1_C, FN_GLO_SCLK_C,
+	FN_ETH_MDC, FN_RMII_MDC, FN_STP_ISD_1_B,
+	FN_TS_SPSYNC1_C, FN_GLO_SDATA_C, FN_PWM0,
+	FN_SCIFA2_SCK_C, FN_STP_ISEN_1_B, FN_TS_SDAT1_C,
+	FN_GLO_SS_C, FN_PWM1, FN_SCIFA2_TXD_C,
+	FN_STP_ISSYNC_1_B, FN_TS_SCK1_C, FN_GLO_RFON_C,
+	FN_PCMOE_N, FN_PWM2, FN_PWMFSW0, FN_SCIFA2_RXD_C,
+	FN_PCMWE_N, FN_IECLK_C, FN_DU1_DOTCLKIN,
+	FN_AUDIO_CLKC, FN_AUDIO_CLKOUT_C, FN_VI0_CLK,
+	FN_ATACS00_N, FN_AVB_RXD1, FN_MII_RXD1,
+	FN_VI0_DATA0_VI0_B0, FN_ATACS10_N, FN_AVB_RXD2,
+	FN_MII_RXD2,
+
+	/* IPSR8 - IPSR16 */
+
+	FN_SEL_SCIF1_0, FN_SEL_SCIF1_1, FN_SEL_SCIF1_2, FN_SEL_SCIF1_3,
+	FN_SEL_SCIF1_4,
+	FN_SEL_SCIFB_0, FN_SEL_SCIFB_1, FN_SEL_SCIFB_2,
+	FN_SEL_SCIFB2_0, FN_SEL_SCIFB2_1, FN_SEL_SCIFB2_2,
+	FN_SEL_SCIFB1_0, FN_SEL_SCIFB1_1, FN_SEL_SCIFB1_2, FN_SEL_SCIFB1_3,
+	FN_SEL_SCIFB1_4,
+	FN_SEL_SCIFB1_5, FN_SEL_SCIFB1_6,
+	FN_SEL_SCIFA1_0, FN_SEL_SCIFA1_1, FN_SEL_SCIFA1_2, FN_SEL_SCIFA1_3,
+	FN_SEL_SCIF0_0, FN_SEL_SCIF0_1,
+	FN_SEL_SCFA_0, FN_SEL_SCFA_1,
+	FN_SEL_SOF1_0, FN_SEL_SOF1_1,
+	FN_SEL_SSI7_0, FN_SEL_SSI7_1, FN_SEL_SSI7_2,
+	FN_SEL_SSI6_0, FN_SEL_SSI6_1,
+	FN_SEL_SSI5_0, FN_SEL_SSI5_1, FN_SEL_SSI5_2,
+	FN_SEL_VI3_0, FN_SEL_VI3_1,
+	FN_SEL_VI2_0, FN_SEL_VI2_1,
+	FN_SEL_VI1_0, FN_SEL_VI1_1,
+	FN_SEL_VI0_0, FN_SEL_VI0_1,
+	FN_SEL_TSIF1_0, FN_SEL_TSIF1_1, FN_SEL_TSIF1_2,
+	FN_SEL_LBS_0, FN_SEL_LBS_1,
+	FN_SEL_TSIF0_0, FN_SEL_TSIF0_1, FN_SEL_TSIF0_2, FN_SEL_TSIF0_3,
+	FN_SEL_SOF3_0, FN_SEL_SOF3_1,
+	FN_SEL_SOF0_0, FN_SEL_SOF0_1,
+
+	FN_SEL_TMU1_0, FN_SEL_TMU1_1,
+	FN_SEL_HSCIF1_0, FN_SEL_HSCIF1_1,
+	FN_SEL_SCIFCLK_0, FN_SEL_SCIFCLK_1,
+	FN_SEL_CAN0_0, FN_SEL_CAN0_1, FN_SEL_CAN0_2, FN_SEL_CAN0_3,
+	FN_SEL_CANCLK_0, FN_SEL_CANCLK_1,
+	FN_SEL_SCIFA2_0, FN_SEL_SCIFA2_1, FN_SEL_SCIFA2_2,
+	FN_SEL_CAN1_0, FN_SEL_CAN1_1,
+	FN_SEL_ADI_0, FN_SEL_ADI_1,
+	FN_SEL_SSP_0, FN_SEL_SSP_1,
+	FN_SEL_FM_0, FN_SEL_FM_1, FN_SEL_FM_2, FN_SEL_FM_3,
+	FN_SEL_FM_4, FN_SEL_FM_5, FN_SEL_FM_6,
+	FN_SEL_HSCIF0_0, FN_SEL_HSCIF0_1, FN_SEL_HSCIF0_2, FN_SEL_HSCIF0_3,
+	FN_SEL_HSCIF0_4, FN_SEL_HSCIF0_5,
+	FN_SEL_GPS_0, FN_SEL_GPS_1, FN_SEL_GPS_2,
+	FN_SEL_RDS_0, FN_SEL_RDS_1, FN_SEL_RDS_2,
+	FN_SEL_RDS_3, FN_SEL_RDS_4, FN_SEL_RDS_5,
+	FN_SEL_SIM_0, FN_SEL_SIM_1, FN_SEL_SIM_2,
+	FN_SEL_SSI8_0, FN_SEL_SSI8_1, FN_SEL_SSI8_2,
+
+	FN_SEL_IICDVFS_0, FN_SEL_IICDVFS_1,
+	FN_SEL_IIC0_0, FN_SEL_IIC0_1,
+	FN_SEL_IEB_0, FN_SEL_IEB_1, FN_SEL_IEB_2,
+	FN_SEL_IIC2_0, FN_SEL_IIC2_1, FN_SEL_IIC2_2, FN_SEL_IIC2_3,
+	FN_SEL_IIC2_4,
+	FN_SEL_IIC1_0, FN_SEL_IIC1_1, FN_SEL_IIC1_2,
+	FN_SEL_I2C2_0, FN_SEL_I2C2_1, FN_SEL_I2C2_2, FN_SEL_I2C2_3,
+	FN_SEL_I2C2_4,
+	FN_SEL_I2C1_0, FN_SEL_I2C1_1, FN_SEL_I2C1_2,
+
+	PINMUX_FUNCTION_END,
+
+	PINMUX_MARK_BEGIN,
+
+	DACK0_MARK, IRQ0_MARK, INTC_IRQ0_N_MARK, SSI_SCK6_B_MARK,
+	VI1_VSYNC_N_MARK, VI1_VSYNC_N_B_MARK, SSI_WS78_C_MARK,
+	DREQ1_N_MARK, VI1_CLKENB_MARK, VI1_CLKENB_B_MARK,
+	SSI_SDATA7_C_MARK, SSI_SCK78_B_MARK, DACK1_MARK, IRQ1_MARK,
+	INTC_IRQ1_N_MARK, SSI_WS6_B_MARK, SSI_SDATA8_C_MARK,
+	DREQ2_N_MARK, HSCK1_B_MARK, HCTS0_N_B_MARK,
+	MSIOF0_TXD_B_MARK, DACK2_MARK, IRQ2_MARK, INTC_IRQ2_N_MARK,
+	SSI_SDATA6_B_MARK, HRTS0_N_B_MARK, MSIOF0_RXD_B_MARK,
+	ETH_CRS_DV_MARK, RMII_CRS_DV_MARK, STP_ISCLK_0_B_MARK,
+	TS_SDEN0_D_MARK, GLO_Q0_C_MARK, SCL2_E_MARK,
+	SCL2_CIS_E_MARK, ETH_RX_ER_MARK, RMII_RX_ER_MARK,
+	STP_ISD_0_B_MARK, TS_SPSYNC0_D_MARK, GLO_Q1_C_MARK,
+	SDA2_E_MARK, SDA2_CIS_E_MARK, ETH_RXD0_MARK, RMII_RXD0_MARK,
+	STP_ISEN_0_B_MARK, TS_SDAT0_D_MARK, GLO_I0_C_MARK,
+	SCIFB1_SCK_G_MARK, SCK1_E_MARK, ETH_RXD1_MARK,
+	RMII_RXD1_MARK, HRX0_E_MARK, STP_ISSYNC_0_B_MARK,
+	TS_SCK0_D_MARK, GLO_I1_C_MARK, SCIFB1_RXD_G_MARK,
+	RX1_E_MARK, ETH_LINK_MARK, RMII_LINK_MARK, HTX0_E_MARK,
+	STP_IVCXO27_0_B_MARK, SCIFB1_TXD_G_MARK, TX1_E_MARK,
+	ETH_REF_CLK_MARK, RMII_REF_CLK_MARK, HCTS0_N_E_MARK,
+	STP_IVCXO27_1_B_MARK, HRX0_F_MARK,
+
+	ETH_MDIO_MARK, RMII_MDIO_MARK, HRTS0_N_E_MARK,
+	SIM0_D_C_MARK, HCTS0_N_F_MARK, ETH_TXD1_MARK,
+	RMII_TXD1_MARK, HTX0_F_MARK, BPFCLK_G_MARK, RDS_CLK_F_MARK,
+	ETH_TX_EN_MARK, RMII_TX_EN_MARK, SIM0_CLK_C_MARK,
+	HRTS0_N_F_MARK, ETH_MAGIC_MARK, RMII_MAGIC_MARK,
+	SIM0_RST_C_MARK, ETH_TXD0_MARK, RMII_TXD0_MARK,
+	STP_ISCLK_1_B_MARK, TS_SDEN1_C_MARK, GLO_SCLK_C_MARK,
+	ETH_MDC_MARK, RMII_MDC_MARK, STP_ISD_1_B_MARK,
+	TS_SPSYNC1_C_MARK, GLO_SDATA_C_MARK, PWM0_MARK,
+	SCIFA2_SCK_C_MARK, STP_ISEN_1_B_MARK, TS_SDAT1_C_MARK,
+	GLO_SS_C_MARK, PWM1_MARK, SCIFA2_TXD_C_MARK,
+	STP_ISSYNC_1_B_MARK, TS_SCK1_C_MARK, GLO_RFON_C_MARK,
+	PCMOE_N_MARK, PWM2_MARK, PWMFSW0_MARK, SCIFA2_RXD_C_MARK,
+	PCMWE_N_MARK, IECLK_C_MARK, DU1_DOTCLKIN_MARK,
+	AUDIO_CLKC_MARK, AUDIO_CLKOUT_C_MARK, VI0_CLK_MARK,
+	ATACS00_N_MARK, AVB_RXD1_MARK, MII_RXD1_MARK,
+	VI0_DATA0_VI0_B0_MARK, ATACS10_N_MARK, AVB_RXD2_MARK,
+	MII_RXD2_MARK,
+
+	PINMUX_MARK_END,
+};
+
+static pinmux_enum_t pinmux_data[] = {
+	PINMUX_DATA_GP_ALL(), /* PINMUX_DATA(GP_M_N_DATA, GP_M_N_FN...), */
+
+	PINMUX_IPSR_DATA(IP6_2_0, DACK0),
+	PINMUX_IPSR_DATA(IP6_2_0, IRQ0),
+	PINMUX_IPSR_DATA(IP6_2_0, INTC_IRQ0_N),
+	PINMUX_IPSR_MODSEL_DATA(IP6_2_0, SSI_SCK6_B, SEL_SSI6_1),
+	PINMUX_IPSR_MODSEL_DATA(IP6_2_0, VI1_VSYNC_N, SEL_VI1_0),
+	PINMUX_IPSR_MODSEL_DATA(IP6_2_0, VI1_VSYNC_N_B, SEL_VI1_1),
+	PINMUX_IPSR_MODSEL_DATA(IP6_2_0, SSI_WS78_C, SEL_SSI7_2),
+	PINMUX_IPSR_DATA(IP6_5_3, DREQ1_N),
+	PINMUX_IPSR_MODSEL_DATA(IP6_5_3, VI1_CLKENB, SEL_VI1_0),
+	PINMUX_IPSR_MODSEL_DATA(IP6_5_3, VI1_CLKENB_B, SEL_VI1_1),
+	PINMUX_IPSR_MODSEL_DATA(IP6_5_3, SSI_SDATA7_C, SEL_SSI7_2),
+	PINMUX_IPSR_MODSEL_DATA(IP6_5_3, SSI_SCK78_B, SEL_SSI7_1),
+	PINMUX_IPSR_DATA(IP6_8_6, DACK1),
+	PINMUX_IPSR_DATA(IP6_8_6, IRQ1),
+	PINMUX_IPSR_DATA(IP6_8_6, INTC_IRQ1_N),
+	PINMUX_IPSR_MODSEL_DATA(IP6_8_6, SSI_WS6_B, SEL_SSI6_1),
+	PINMUX_IPSR_MODSEL_DATA(IP6_8_6, SSI_SDATA8_C, SEL_SSI8_2),
+	PINMUX_IPSR_DATA(IP6_10_9, DREQ2_N),
+	PINMUX_IPSR_MODSEL_DATA(IP6_10_9, HSCK1_B, SEL_HSCIF1_1),
+	PINMUX_IPSR_MODSEL_DATA(IP6_10_9, HCTS0_N_B, SEL_HSCIF0_1),
+	PINMUX_IPSR_MODSEL_DATA(IP6_10_9, MSIOF0_TXD_B, SEL_SOF0_1),
+	PINMUX_IPSR_DATA(IP6_13_11, DACK2),
+	PINMUX_IPSR_DATA(IP6_13_11, IRQ2),
+	PINMUX_IPSR_DATA(IP6_13_11, INTC_IRQ2_N),
+	PINMUX_IPSR_MODSEL_DATA(IP6_13_11, SSI_SDATA6_B, SEL_SSI6_1),
+	PINMUX_IPSR_MODSEL_DATA(IP6_13_11, HRTS0_N_B, SEL_HSCIF0_1),
+	PINMUX_IPSR_MODSEL_DATA(IP6_13_11, MSIOF0_RXD_B, SEL_SOF0_1),
+	PINMUX_IPSR_DATA(IP6_16_14, ETH_CRS_DV),
+	PINMUX_IPSR_DATA(IP6_16_14, RMII_CRS_DV),
+	PINMUX_IPSR_MODSEL_DATA(IP6_16_14, STP_ISCLK_0_B, SEL_SSP_1),
+	PINMUX_IPSR_MODSEL_DATA(IP6_16_14, TS_SDEN0_D, SEL_TSIF0_3),
+	PINMUX_IPSR_MODSEL_DATA(IP6_16_14, GLO_Q0_C, SEL_GPS_2),
+	PINMUX_IPSR_MODSEL_DATA(IP6_16_14, SCL2_E, SEL_IIC2_4),
+	PINMUX_IPSR_MODSEL_DATA(IP6_16_14, SCL2_CIS_E, SEL_I2C2_4),
+	PINMUX_IPSR_DATA(IP6_19_17, ETH_RX_ER),
+	PINMUX_IPSR_DATA(IP6_19_17, RMII_RX_ER),
+	PINMUX_IPSR_MODSEL_DATA(IP6_19_17, STP_ISD_0_B, SEL_SSP_1),
+	PINMUX_IPSR_MODSEL_DATA(IP6_19_17, TS_SPSYNC0_D, SEL_TSIF0_3),
+	PINMUX_IPSR_MODSEL_DATA(IP6_19_17, GLO_Q1_C, SEL_GPS_2),
+	PINMUX_IPSR_MODSEL_DATA(IP6_19_17, SDA2_E, SEL_IIC2_4),
+	PINMUX_IPSR_MODSEL_DATA(IP6_19_17, SDA2_CIS_E, SEL_I2C2_4),
+	PINMUX_IPSR_DATA(IP6_22_20, ETH_RXD0),
+	PINMUX_IPSR_DATA(IP6_22_20, RMII_RXD0),
+	PINMUX_IPSR_MODSEL_DATA(IP6_22_20, STP_ISEN_0_B, SEL_SSP_1),
+	PINMUX_IPSR_MODSEL_DATA(IP6_22_20, TS_SDAT0_D, SEL_TSIF0_3),
+	PINMUX_IPSR_MODSEL_DATA(IP6_22_20, GLO_I0_C, SEL_GPS_2),
+	PINMUX_IPSR_MODSEL_DATA(IP6_22_20, SCIFB1_SCK_G, SEL_SCIFB1_6),
+	PINMUX_IPSR_MODSEL_DATA(IP6_22_20, SCK1_E, SEL_SCIF1_4),
+	PINMUX_IPSR_DATA(IP6_25_23, ETH_RXD1),
+	PINMUX_IPSR_DATA(IP6_25_23, RMII_RXD1),
+	PINMUX_IPSR_MODSEL_DATA(IP6_25_23, HRX0_E, SEL_HSCIF0_4),
+	PINMUX_IPSR_MODSEL_DATA(IP6_25_23, STP_ISSYNC_0_B, SEL_SSP_1),
+	PINMUX_IPSR_MODSEL_DATA(IP6_25_23, TS_SCK0_D, SEL_TSIF0_3),
+	PINMUX_IPSR_MODSEL_DATA(IP6_25_23, GLO_I1_C, SEL_GPS_2),
+	PINMUX_IPSR_MODSEL_DATA(IP6_25_23, SCIFB1_RXD_G, SEL_SCIFB1_6),
+	PINMUX_IPSR_MODSEL_DATA(IP6_25_23, RX1_E, SEL_SCIF1_4),
+	PINMUX_IPSR_DATA(IP6_28_26, ETH_LINK),
+	PINMUX_IPSR_DATA(IP6_28_26, RMII_LINK),
+	PINMUX_IPSR_MODSEL_DATA(IP6_28_26, HTX0_E, SEL_HSCIF0_4),
+	PINMUX_IPSR_MODSEL_DATA(IP6_28_26, STP_IVCXO27_0_B, SEL_SSP_1),
+	PINMUX_IPSR_MODSEL_DATA(IP6_28_26, SCIFB1_TXD_G, SEL_SCIFB1_6),
+	PINMUX_IPSR_MODSEL_DATA(IP6_28_26, TX1_E, SEL_SCIF1_4),
+	PINMUX_IPSR_DATA(IP6_31_29, ETH_REF_CLK),
+	PINMUX_IPSR_DATA(IP6_31_29, RMII_REF_CLK),
+	PINMUX_IPSR_MODSEL_DATA(IP6_31_29, HCTS0_N_E, SEL_HSCIF0_4),
+	PINMUX_IPSR_MODSEL_DATA(IP6_31_29, STP_IVCXO27_1_B, SEL_SSP_1),
+	PINMUX_IPSR_MODSEL_DATA(IP6_31_29, HRX0_F, SEL_HSCIF0_5),
+
+	PINMUX_IPSR_DATA(IP7_2_0, ETH_MDIO),
+	PINMUX_IPSR_DATA(IP7_2_0, RMII_MDIO),
+	PINMUX_IPSR_MODSEL_DATA(IP7_2_0, HRTS0_N_E, SEL_HSCIF0_4),
+	PINMUX_IPSR_MODSEL_DATA(IP7_2_0, SIM0_D_C, SEL_SIM_2),
+	PINMUX_IPSR_MODSEL_DATA(IP7_2_0, HCTS0_N_F, SEL_HSCIF0_5),
+	PINMUX_IPSR_DATA(IP7_5_3, ETH_TXD1),
+	PINMUX_IPSR_DATA(IP7_5_3, RMII_TXD1),
+	PINMUX_IPSR_MODSEL_DATA(IP7_5_3, HTX0_F, SEL_HSCIF0_4),
+	PINMUX_IPSR_MODSEL_DATA(IP7_5_3, BPFCLK_G, SEL_SIM_2),
+	PINMUX_IPSR_MODSEL_DATA(IP7_5_3, RDS_CLK_F, SEL_HSCIF0_5),
+	PINMUX_IPSR_DATA(IP7_7_6, ETH_TX_EN),
+	PINMUX_IPSR_DATA(IP7_7_6, RMII_TX_EN),
+	PINMUX_IPSR_MODSEL_DATA(IP7_7_6, SIM0_CLK_C, SEL_SIM_2),
+	PINMUX_IPSR_MODSEL_DATA(IP7_7_6, HRTS0_N_F, SEL_HSCIF0_5),
+	PINMUX_IPSR_DATA(IP7_9_8, ETH_MAGIC),
+	PINMUX_IPSR_DATA(IP7_9_8, RMII_MAGIC),
+	PINMUX_IPSR_MODSEL_DATA(IP7_9_8, SIM0_RST_C, SEL_SIM_2),
+	PINMUX_IPSR_DATA(IP7_12_10, ETH_TXD0),
+	PINMUX_IPSR_DATA(IP7_12_10, RMII_TXD0),
+	PINMUX_IPSR_MODSEL_DATA(IP7_12_10, STP_ISCLK_1_B, SEL_SSP_1),
+	PINMUX_IPSR_MODSEL_DATA(IP7_12_10, TS_SDEN1_C, SEL_TSIF1_2),
+	PINMUX_IPSR_MODSEL_DATA(IP7_12_10, GLO_SCLK_C, SEL_GPS_2),
+	PINMUX_IPSR_DATA(IP7_15_13, ETH_MDC),
+	PINMUX_IPSR_DATA(IP7_15_13, RMII_MDC),
+	PINMUX_IPSR_MODSEL_DATA(IP7_15_13, STP_ISD_1_B, SEL_SSP_1),
+	PINMUX_IPSR_MODSEL_DATA(IP7_15_13, TS_SPSYNC1_C, SEL_TSIF1_2),
+	PINMUX_IPSR_MODSEL_DATA(IP7_15_13, GLO_SDATA_C, SEL_GPS_2),
+	PINMUX_IPSR_DATA(IP7_18_16, PWM0),
+	PINMUX_IPSR_MODSEL_DATA(IP7_18_16, SCIFA2_SCK_C, SEL_SCIFA2_2),
+	PINMUX_IPSR_MODSEL_DATA(IP7_18_16, STP_ISEN_1_B, SEL_SSP_1),
+	PINMUX_IPSR_MODSEL_DATA(IP7_18_16, TS_SDAT1_C, SEL_TSIF1_2),
+	PINMUX_IPSR_MODSEL_DATA(IP7_18_16, GLO_SS_C, SEL_GPS_2),
+	PINMUX_IPSR_DATA(IP7_21_19, PWM1),
+	PINMUX_IPSR_MODSEL_DATA(IP7_21_19, SCIFA2_TXD_C, SEL_SCIFA2_2),
+	PINMUX_IPSR_MODSEL_DATA(IP7_21_19, STP_ISSYNC_1_B, SEL_SSP_1),
+	PINMUX_IPSR_MODSEL_DATA(IP7_21_19, TS_SCK1_C, SEL_TSIF1_2),
+	PINMUX_IPSR_MODSEL_DATA(IP7_21_19, GLO_RFON_C, SEL_GPS_2),
+	PINMUX_IPSR_DATA(IP7_21_19, PCMOE_N),
+	PINMUX_IPSR_DATA(IP7_24_22, PWM2),
+	PINMUX_IPSR_DATA(IP7_24_22, PWMFSW0),
+	PINMUX_IPSR_MODSEL_DATA(IP7_24_22, SCIFA2_RXD_C, SEL_SCIFA2_2),
+	PINMUX_IPSR_DATA(IP7_24_22, PCMWE_N),
+	PINMUX_IPSR_MODSEL_DATA(IP7_24_22, IECLK_C, SEL_IEB_2),
+	PINMUX_IPSR_DATA(IP7_26_25, DU1_DOTCLKIN),
+	PINMUX_IPSR_DATA(IP7_26_25, AUDIO_CLKC),
+	PINMUX_IPSR_DATA(IP7_26_25, AUDIO_CLKOUT_C),
+	PINMUX_IPSR_MODSEL_DATA(IP7_28_27, VI0_CLK, SEL_VI0_0),
+	PINMUX_IPSR_DATA(IP7_28_27, ATACS00_N),
+	PINMUX_IPSR_DATA(IP7_28_27, AVB_RXD1),
+	PINMUX_IPSR_DATA(IP7_28_27, MII_RXD1),
+	PINMUX_IPSR_MODSEL_DATA(IP7_30_29, VI0_DATA0_VI0_B0, SEL_VI0_0),
+	PINMUX_IPSR_DATA(IP7_30_29, ATACS10_N),
+	PINMUX_IPSR_DATA(IP7_30_29, AVB_RXD2),
+	PINMUX_IPSR_DATA(IP7_30_29, MII_RXD2),
+
+};
+
+static struct pinmux_gpio pinmux_gpios[] = {
+	PINMUX_GPIO_GP_ALL(),
+
+	/*IPSR0 - IPSR5*/
+	/*IPSR6*/
+	GPIO_FN(DACK0), GPIO_FN(IRQ0), GPIO_FN(INTC_IRQ0_N),
+	GPIO_FN(SSI_SCK6_B), GPIO_FN(VI1_VSYNC_N), GPIO_FN(VI1_VSYNC_N_B),
+	GPIO_FN(SSI_WS78_C), GPIO_FN(DREQ1_N), GPIO_FN(VI1_CLKENB),
+	GPIO_FN(VI1_CLKENB_B), GPIO_FN(SSI_SDATA7_C), GPIO_FN(SSI_SCK78_B),
+	GPIO_FN(DACK1), GPIO_FN(IRQ1), GPIO_FN(INTC_IRQ1_N), GPIO_FN(SSI_WS6_B),
+	GPIO_FN(SSI_SDATA8_C), GPIO_FN(DREQ2_N), GPIO_FN(HSCK1_B),
+	GPIO_FN(HCTS0_N_B), GPIO_FN(MSIOF0_TXD_B), GPIO_FN(DACK2),
+	GPIO_FN(IRQ2), GPIO_FN(INTC_IRQ2_N), GPIO_FN(SSI_SDATA6_B),
+	GPIO_FN(HRTS0_N_B), GPIO_FN(MSIOF0_RXD_B), GPIO_FN(ETH_CRS_DV),
+	GPIO_FN(RMII_CRS_DV), GPIO_FN(STP_ISCLK_0_B), GPIO_FN(TS_SDEN0_D),
+	GPIO_FN(GLO_Q0_C), GPIO_FN(SCL2_E), GPIO_FN(SCL2_CIS_E),
+	GPIO_FN(ETH_RX_ER), GPIO_FN(RMII_RX_ER), GPIO_FN(STP_ISD_0_B),
+	GPIO_FN(TS_SPSYNC0_D), GPIO_FN(GLO_Q1_C), GPIO_FN(SDA2_E),
+	GPIO_FN(SDA2_CIS_E), GPIO_FN(ETH_RXD0), GPIO_FN(RMII_RXD0),
+	GPIO_FN(STP_ISEN_0_B), GPIO_FN(TS_SDAT0_D), GPIO_FN(GLO_I0_C),
+	GPIO_FN(SCIFB1_SCK_G), GPIO_FN(SCK1_E), GPIO_FN(ETH_RXD1),
+	GPIO_FN(RMII_RXD1), GPIO_FN(HRX0_E), GPIO_FN(STP_ISSYNC_0_B),
+	GPIO_FN(TS_SCK0_D), GPIO_FN(GLO_I1_C), GPIO_FN(SCIFB1_RXD_G),
+	GPIO_FN(RX1_E), GPIO_FN(ETH_LINK), GPIO_FN(RMII_LINK), GPIO_FN(HTX0_E),
+	GPIO_FN(STP_IVCXO27_0_B), GPIO_FN(SCIFB1_TXD_G), GPIO_FN(TX1_E),
+	GPIO_FN(ETH_REF_CLK), GPIO_FN(RMII_REF_CLK), GPIO_FN(HCTS0_N_E),
+	GPIO_FN(STP_IVCXO27_1_B), GPIO_FN(HRX0_F),
+
+	/*IPSR7*/
+	GPIO_FN(ETH_MDIO), GPIO_FN(RMII_MDIO), GPIO_FN(HRTS0_N_E),
+	GPIO_FN(SIM0_D_C), GPIO_FN(HCTS0_N_F), GPIO_FN(ETH_TXD1),
+	GPIO_FN(RMII_TXD1), GPIO_FN(HTX0_F), GPIO_FN(BPFCLK_G),
+	GPIO_FN(RDS_CLK_F), GPIO_FN(ETH_TX_EN), GPIO_FN(RMII_TX_EN),
+	GPIO_FN(SIM0_CLK_C), GPIO_FN(HRTS0_N_F), GPIO_FN(ETH_MAGIC),
+	GPIO_FN(RMII_MAGIC), GPIO_FN(SIM0_RST_C), GPIO_FN(ETH_TXD0),
+	GPIO_FN(RMII_TXD0), GPIO_FN(STP_ISCLK_1_B), GPIO_FN(TS_SDEN1_C),
+	GPIO_FN(GLO_SCLK_C), GPIO_FN(ETH_MDC), GPIO_FN(RMII_MDC),
+	GPIO_FN(STP_ISD_1_B), GPIO_FN(TS_SPSYNC1_C), GPIO_FN(GLO_SDATA_C),
+	GPIO_FN(PWM0), GPIO_FN(SCIFA2_SCK_C), GPIO_FN(STP_ISEN_1_B),
+	GPIO_FN(TS_SDAT1_C), GPIO_FN(GLO_SS_C), GPIO_FN(PWM1),
+	GPIO_FN(SCIFA2_TXD_C), GPIO_FN(STP_ISSYNC_1_B), GPIO_FN(TS_SCK1_C),
+	GPIO_FN(GLO_RFON_C), GPIO_FN(PCMOE_N), GPIO_FN(PWM2), GPIO_FN(PWMFSW0),
+	GPIO_FN(SCIFA2_RXD_C), GPIO_FN(PCMWE_N), GPIO_FN(IECLK_C),
+	GPIO_FN(DU1_DOTCLKIN), GPIO_FN(AUDIO_CLKC), GPIO_FN(AUDIO_CLKOUT_C),
+	GPIO_FN(VI0_CLK), GPIO_FN(ATACS00_N), GPIO_FN(AVB_RXD1),
+	GPIO_FN(MII_RXD1), GPIO_FN(VI0_DATA0_VI0_B0), GPIO_FN(ATACS10_N),
+	GPIO_FN(AVB_RXD2), GPIO_FN(MII_RXD2),
+	/*IPSR8 - IPSR16*/
+};
+
+static struct pinmux_cfg_reg pinmux_config_regs[] = {
+	{ PINMUX_CFG_REG("GPSR0", 0xE6060004, 32, 1) {
+		GP_0_31_FN, FN_IP3_17_15,
+		GP_0_30_FN, FN_IP3_14_12,
+		GP_0_29_FN, FN_IP3_11_8,
+		GP_0_28_FN, FN_IP3_7_4,
+		GP_0_27_FN, FN_IP3_3_0,
+		GP_0_26_FN, FN_IP2_28_26,
+		GP_0_25_FN, FN_IP2_25_22,
+		GP_0_24_FN, FN_IP2_21_18,
+		GP_0_23_FN, FN_IP2_17_15,
+		GP_0_22_FN, FN_IP2_14_12,
+		GP_0_21_FN, FN_IP2_11_9,
+		GP_0_20_FN, FN_IP2_8_6,
+		GP_0_19_FN, FN_IP2_5_3,
+		GP_0_18_FN, FN_IP2_2_0,
+		GP_0_17_FN, FN_IP1_29_28,
+		GP_0_16_FN, FN_IP1_27_26,
+		GP_0_15_FN, FN_IP1_25_22,
+		GP_0_14_FN, FN_IP1_21_18,
+		GP_0_13_FN, FN_IP1_17_15,
+		GP_0_12_FN, FN_IP1_14_12,
+		GP_0_11_FN, FN_IP1_11_8,
+		GP_0_10_FN, FN_IP1_7_4,
+		GP_0_9_FN, FN_IP1_3_0,
+		GP_0_8_FN, FN_IP0_30_27,
+		GP_0_7_FN, FN_IP0_26_23,
+		GP_0_6_FN, FN_IP0_22_20,
+		GP_0_5_FN, FN_IP0_19_16,
+		GP_0_4_FN, FN_IP0_15_12,
+		GP_0_3_FN, FN_IP0_11_9,
+		GP_0_2_FN, FN_IP0_8_6,
+		GP_0_1_FN, FN_IP0_5_3,
+		GP_0_0_FN, FN_IP0_2_0 }
+	},
+	{ PINMUX_CFG_REG("GPSR1", 0xE6060008, 32, 1) {
+		0, 0,
+		0, 0,
+		GP_1_29_FN, FN_IP6_13_11,
+		GP_1_28_FN, FN_IP6_10_9,
+		GP_1_27_FN, FN_IP6_8_6,
+		GP_1_26_FN, FN_IP6_5_3,
+		GP_1_25_FN, FN_IP6_2_0,
+		GP_1_24_FN, FN_IP5_29_27,
+		GP_1_23_FN, FN_IP5_26_24,
+		GP_1_22_FN, FN_IP5_23_21,
+		GP_1_21_FN, FN_IP5_20_18,
+		GP_1_20_FN, FN_IP5_17_15,
+		GP_1_19_FN, FN_IP5_14_13,
+		GP_1_18_FN, FN_IP5_12_10,
+		GP_1_17_FN, FN_IP5_9_6,
+		GP_1_16_FN, FN_IP5_5_3,
+		GP_1_15_FN, FN_IP5_2_0,
+		GP_1_14_FN, FN_IP4_29_27,
+		GP_1_13_FN, FN_IP4_26_24,
+		GP_1_12_FN, FN_IP4_23_21,
+		GP_1_11_FN, FN_IP4_20_18,
+		GP_1_10_FN, FN_IP4_17_15,
+		GP_1_9_FN, FN_IP4_14_12,
+		GP_1_8_FN, FN_IP4_11_9,
+		GP_1_7_FN, FN_IP4_8_6,
+		GP_1_6_FN, FN_IP4_5_3,
+		GP_1_5_FN, FN_IP4_2_0,
+		GP_1_4_FN, FN_IP3_31_29,
+		GP_1_3_FN, FN_IP3_28_26,
+		GP_1_2_FN, FN_IP3_25_23,
+		GP_1_1_FN, FN_IP3_22_20,
+		GP_1_0_FN, FN_IP3_19_18, }
+	},
+	{ PINMUX_CFG_REG("GPSR2", 0xE606000C, 32, 1) {
+		0, 0,
+		0, 0,
+		GP_2_29_FN, FN_IP7_15_13,
+		GP_2_28_FN, FN_IP7_12_10,
+		GP_2_27_FN, FN_IP7_9_8,
+		GP_2_26_FN, FN_IP7_7_6,
+		GP_2_25_FN, FN_IP7_5_3,
+		GP_2_24_FN, FN_IP7_2_0,
+		GP_2_23_FN, FN_IP6_31_29,
+		GP_2_22_FN, FN_IP6_28_26,
+		GP_2_21_FN, FN_IP6_25_23,
+		GP_2_20_FN, FN_IP6_22_20,
+		GP_2_19_FN, FN_IP6_19_17,
+		GP_2_18_FN, FN_IP6_16_14,
+		GP_2_17_FN, FN_VI1_DATA7_VI1_B7,
+		GP_2_16_FN, FN_IP8_27,
+		GP_2_15_FN, FN_IP8_26,
+		GP_2_14_FN, FN_IP8_25_24,
+		GP_2_13_FN, FN_IP8_23_22,
+		GP_2_12_FN, FN_IP8_21_20,
+		GP_2_11_FN, FN_IP8_19_18,
+		GP_2_10_FN, FN_IP8_17_16,
+		GP_2_9_FN, FN_IP8_15_14,
+		GP_2_8_FN, FN_IP8_13_12,
+		GP_2_7_FN, FN_IP8_11_10,
+		GP_2_6_FN, FN_IP8_9_8,
+		GP_2_5_FN, FN_IP8_7_6,
+		GP_2_4_FN, FN_IP8_5_4,
+		GP_2_3_FN, FN_IP8_3_2,
+		GP_2_2_FN, FN_IP8_1_0,
+		GP_2_1_FN, FN_IP7_30_29,
+		GP_2_0_FN, FN_IP7_28_27 }
+	},
+	{ PINMUX_CFG_REG("GPSR3", 0xE6060010, 32, 1) {
+		GP_3_31_FN, FN_IP11_21_18,
+		GP_3_30_FN, FN_IP11_17_15,
+		GP_3_29_FN, FN_IP11_14_13,
+		GP_3_28_FN, FN_IP11_12_11,
+		GP_3_27_FN, FN_IP11_10_9,
+		GP_3_26_FN, FN_IP11_8_7,
+		GP_3_25_FN, FN_IP11_6_5,
+		GP_3_24_FN, FN_IP11_4,
+		GP_3_23_FN, FN_IP11_3_0,
+		GP_3_22_FN, FN_IP10_29_26,
+		GP_3_21_FN, FN_IP10_25_23,
+		GP_3_20_FN, FN_IP10_22_19,
+		GP_3_19_FN, FN_IP10_18_15,
+		GP_3_18_FN, FN_IP10_14_11,
+		GP_3_17_FN, FN_IP10_10_7,
+		GP_3_16_FN, FN_IP10_6_4,
+		GP_3_15_FN, FN_IP10_3_0,
+		GP_3_14_FN, FN_IP9_31_28,
+		GP_3_13_FN, FN_IP9_27_26,
+		GP_3_12_FN, FN_IP9_25_24,
+		GP_3_11_FN, FN_IP9_23_22,
+		GP_3_10_FN, FN_IP9_21_20,
+		GP_3_9_FN, FN_IP9_19_18,
+		GP_3_8_FN, FN_IP9_17_16,
+		GP_3_7_FN, FN_IP9_15_12,
+		GP_3_6_FN, FN_IP9_11_8,
+		GP_3_5_FN, FN_IP9_7_6,
+		GP_3_4_FN, FN_IP9_5_4,
+		GP_3_3_FN, FN_IP9_3_2,
+		GP_3_2_FN, FN_IP9_1_0,
+		GP_3_1_FN, FN_IP8_30_29,
+		GP_3_0_FN, FN_IP8_28 }
+	},
+	{ PINMUX_CFG_REG("GPSR4", 0xE6060014, 32, 1) {
+		GP_4_31_FN, FN_IP14_18_16,
+		GP_4_30_FN, FN_IP14_15_12,
+		GP_4_29_FN, FN_IP14_11_9,
+		GP_4_28_FN, FN_IP14_8_6,
+		GP_4_27_FN, FN_IP14_5_3,
+		GP_4_26_FN, FN_IP14_2_0,
+		GP_4_25_FN, FN_IP13_30_29,
+		GP_4_24_FN, FN_IP13_28_26,
+		GP_4_23_FN, FN_IP13_25_23,
+		GP_4_22_FN, FN_IP13_22_19,
+		GP_4_21_FN, FN_IP13_18_16,
+		GP_4_20_FN, FN_IP13_15_13,
+		GP_4_19_FN, FN_IP13_12_10,
+		GP_4_18_FN, FN_IP13_9_7,
+		GP_4_17_FN, FN_IP13_6_3,
+		GP_4_16_FN, FN_IP13_2_0,
+		GP_4_15_FN, FN_IP12_30_28,
+		GP_4_14_FN, FN_IP12_27_25,
+		GP_4_13_FN, FN_IP12_24_23,
+		GP_4_12_FN, FN_IP12_22_20,
+		GP_4_11_FN, FN_IP12_19_17,
+		GP_4_10_FN, FN_IP12_16_14,
+		GP_4_9_FN, FN_IP12_13_11,
+		GP_4_8_FN, FN_IP12_10_8,
+		GP_4_7_FN, FN_IP12_7_6,
+		GP_4_6_FN, FN_IP12_5_4,
+		GP_4_5_FN, FN_IP12_3_2,
+		GP_4_4_FN, FN_IP12_1_0,
+		GP_4_3_FN, FN_IP11_31_30,
+		GP_4_2_FN, FN_IP11_29_27,
+		GP_4_1_FN, FN_IP11_26_24,
+		GP_4_0_FN, FN_IP11_23_22 }
+	},
+	{ PINMUX_CFG_REG("GPSR5", 0xE6060018, 32, 1) {
+		GP_5_31_FN, FN_IP7_24_22,
+		GP_5_30_FN, FN_IP7_21_19,
+		GP_5_29_FN, FN_IP7_18_16,
+		GP_5_28_FN, FN_DU_DOTCLKIN2,
+		GP_5_27_FN, FN_IP7_26_25,
+		GP_5_26_FN, FN_DU_DOTCLKIN0,
+		GP_5_25_FN, FN_AVS2,
+		GP_5_24_FN, FN_AVS1,
+		GP_5_23_FN, FN_USB2_OVC,
+		GP_5_22_FN, FN_USB2_PWEN,
+		GP_5_21_FN, FN_IP16_7,
+		GP_5_20_FN, FN_IP16_6,
+		GP_5_19_FN, FN_USB0_OVC_VBUS,
+		GP_5_18_FN, FN_USB0_PWEN,
+		GP_5_17_FN, FN_IP16_5_3,
+		GP_5_16_FN, FN_IP16_2_0,
+		GP_5_15_FN, FN_IP15_29_28,
+		GP_5_14_FN, FN_IP15_27_26,
+		GP_5_13_FN, FN_IP15_25_23,
+		GP_5_12_FN, FN_IP15_22_20,
+		GP_5_11_FN, FN_IP15_19_18,
+		GP_5_10_FN, FN_IP15_17_16,
+		GP_5_9_FN, FN_IP15_15_14,
+		GP_5_8_FN, FN_IP15_13_12,
+		GP_5_7_FN, FN_IP15_11_9,
+		GP_5_6_FN, FN_IP15_8_6,
+		GP_5_5_FN, FN_IP15_5_3,
+		GP_5_4_FN, FN_IP15_2_0,
+		GP_5_3_FN, FN_IP14_30_28,
+		GP_5_2_FN, FN_IP14_27_25,
+		GP_5_1_FN, FN_IP14_24_22,
+		GP_5_0_FN, FN_IP14_21_19 }
+	},
+
+	/*IPSR0 - IPSR5*/
+	{ PINMUX_CFG_REG_VAR("IPSR6", 0xE6060038, 32,
+			     3, 3, 3, 3, 3, 3, 3, 2, 3, 3, 3) {
+		/* IP6_31_29 [3] */
+		FN_ETH_REF_CLK, FN_RMII_REF_CLK, FN_HCTS0_N_E,
+		FN_STP_IVCXO27_1_B, FN_HRX0_F, 0, 0, 0,
+		/* IP6_28_26 [3] */
+		FN_ETH_LINK, FN_RMII_LINK, FN_HTX0_E,
+		FN_STP_IVCXO27_0_B, FN_SCIFB1_TXD_G, FN_TX1_E, 0, 0,
+		/* IP6_25_23 [3] */
+		FN_ETH_RXD1, FN_RMII_RXD1, FN_HRX0_E, FN_STP_ISSYNC_0_B,
+		FN_TS_SCK0_D, FN_GLO_I1_C, FN_SCIFB1_RXD_G, FN_RX1_E,
+		/* IP6_22_20 [3] */
+		FN_ETH_RXD0, FN_RMII_RXD0, FN_STP_ISEN_0_B, FN_TS_SDAT0_D,
+		FN_GLO_I0_C, FN_SCIFB1_SCK_G, FN_SCK1_E, 0,
+		/* IP6_19_17 [3] */
+		FN_ETH_RX_ER, FN_RMII_RX_ER, FN_STP_ISD_0_B,
+		FN_TS_SPSYNC0_D, FN_GLO_Q1_C, FN_SDA2_E, FN_SDA2_CIS_E, 0,
+		/* IP6_16_14 [3] */
+		FN_ETH_CRS_DV, FN_RMII_CRS_DV, FN_STP_ISCLK_0_B,
+		FN_TS_SDEN0_D, FN_GLO_Q0_C, FN_SCL2_E,
+		FN_SCL2_CIS_E, 0,
+		/* IP6_13_11 [3] */
+		FN_DACK2, FN_IRQ2, FN_INTC_IRQ2_N,
+		FN_SSI_SDATA6_B, FN_HRTS0_N_B, FN_MSIOF0_RXD_B, 0, 0,
+		/* IP6_10_9 [2] */
+		FN_DREQ2_N, FN_HSCK1_B, FN_HCTS0_N_B, FN_MSIOF0_TXD_B,
+		/* IP6_8_6 [3] */
+		FN_DACK1, FN_IRQ1, FN_INTC_IRQ1_N, FN_SSI_WS6_B,
+		FN_SSI_SDATA8_C, 0, 0, 0,
+		/* IP6_5_3 [3] */
+		FN_DREQ1_N, FN_VI1_CLKENB, FN_VI1_CLKENB_B,
+		FN_SSI_SDATA7_C, FN_SSI_SCK78_B, 0, 0, 0,
+		/* IP6_2_0 [3] */
+		FN_DACK0, FN_IRQ0, FN_INTC_IRQ0_N, FN_SSI_SCK6_B,
+		FN_VI1_VSYNC_N, FN_VI1_VSYNC_N_B, FN_SSI_WS78_C, 0, }
+	},
+	{ PINMUX_CFG_REG_VAR("IPSR7", 0xE606003C, 32,
+			     1, 2, 2, 2, 3, 3, 3, 3, 3, 2, 2, 3, 3) {
+		/* IP7_31 [1] */
+		0, 0,
+		/* IP7_30_29 [2] */
+		FN_VI0_DATA0_VI0_B0, FN_ATACS10_N, FN_AVB_RXD2,
+		FN_MII_RXD2,
+		/* IP7_28_27 [2] */
+		FN_VI0_CLK, FN_ATACS00_N, FN_AVB_RXD1, FN_MII_RXD1,
+		/* IP7_26_25 [2] */
+		FN_DU1_DOTCLKIN, FN_AUDIO_CLKC, FN_AUDIO_CLKOUT_C, 0,
+		/* IP7_24_22 [3] */
+		FN_PWM2, FN_PWMFSW0, FN_SCIFA2_RXD_C, FN_PCMWE_N, FN_IECLK_C,
+		0, 0, 0,
+		/* IP7_21_19 [3] */
+		FN_PWM1, FN_SCIFA2_TXD_C, FN_STP_ISSYNC_1_B, FN_TS_SCK1_C,
+		FN_GLO_RFON_C, FN_PCMOE_N, 0, 0,
+		/* IP7_18_16 [3] */
+		FN_PWM0, FN_SCIFA2_SCK_C, FN_STP_ISEN_1_B, FN_TS_SDAT1_C,
+		FN_GLO_SS_C, 0, 0, 0,
+		/* IP7_15_13 [3] */
+		FN_ETH_MDC, FN_RMII_MDC, FN_STP_ISD_1_B,
+		FN_TS_SPSYNC1_C, FN_GLO_SDATA_C, 0, 0, 0,
+		/* IP7_12_10 [3] */
+		FN_ETH_TXD0, FN_RMII_TXD0, FN_STP_ISCLK_1_B, FN_TS_SDEN1_C,
+		FN_GLO_SCLK_C, 0, 0, 0,
+		/* IP7_9_8 [2] */
+		FN_ETH_MAGIC, FN_RMII_MAGIC, FN_SIM0_RST_C, 0,
+		/* IP7_7_6 [2] */
+		FN_ETH_TX_EN, FN_RMII_TX_EN, FN_SIM0_CLK_C, FN_HRTS0_N_F,
+		/* IP7_5_3 [3] */
+		FN_ETH_TXD1, FN_RMII_TXD1, FN_HTX0_F, FN_BPFCLK_G, FN_RDS_CLK_F,
+		0, 0, 0,
+		/* IP7_2_0 [3] */
+		FN_ETH_MDIO, FN_RMII_MDIO, FN_HRTS0_N_E,
+		FN_SIM0_D_C, FN_HCTS0_N_F, 0, 0, 0, }
+	},
+	/*IPSR8 - IPSR16*/
+	{ PINMUX_CFG_REG("INOUTSEL0", 0xE6050004, 32, 1) { GP_INOUTSEL(0) } },
+	{ PINMUX_CFG_REG("INOUTSEL1", 0xE6051004, 32, 1) {
+		0, 0,
+		0, 0,
+		GP_1_29_IN, GP_1_29_OUT,
+		GP_1_28_IN, GP_1_28_OUT,
+		GP_1_27_IN, GP_1_27_OUT,
+		GP_1_26_IN, GP_1_26_OUT,
+		GP_1_25_IN, GP_1_25_OUT,
+		GP_1_24_IN, GP_1_24_OUT,
+		GP_1_23_IN, GP_1_23_OUT,
+		GP_1_22_IN, GP_1_22_OUT,
+		GP_1_21_IN, GP_1_21_OUT,
+		GP_1_20_IN, GP_1_20_OUT,
+		GP_1_19_IN, GP_1_19_OUT,
+		GP_1_18_IN, GP_1_18_OUT,
+		GP_1_17_IN, GP_1_17_OUT,
+		GP_1_16_IN, GP_1_16_OUT,
+		GP_1_15_IN, GP_1_15_OUT,
+		GP_1_14_IN, GP_1_14_OUT,
+		GP_1_13_IN, GP_1_13_OUT,
+		GP_1_12_IN, GP_1_12_OUT,
+		GP_1_11_IN, GP_1_11_OUT,
+		GP_1_10_IN, GP_1_10_OUT,
+		GP_1_9_IN, GP_1_9_OUT,
+		GP_1_8_IN, GP_1_8_OUT,
+		GP_1_7_IN, GP_1_7_OUT,
+		GP_1_6_IN, GP_1_6_OUT,
+		GP_1_5_IN, GP_1_5_OUT,
+		GP_1_4_IN, GP_1_4_OUT,
+		GP_1_3_IN, GP_1_3_OUT,
+		GP_1_2_IN, GP_1_2_OUT,
+		GP_1_1_IN, GP_1_1_OUT,
+		GP_1_0_IN, GP_1_0_OUT, }
+	},
+	{ PINMUX_CFG_REG("INOUTSEL2", 0xE6052004, 32, 1) {
+		0, 0,
+		0, 0,
+		GP_2_29_IN, GP_2_29_OUT,
+		GP_2_28_IN, GP_2_28_OUT,
+		GP_2_27_IN, GP_2_27_OUT,
+		GP_2_26_IN, GP_2_26_OUT,
+		GP_2_25_IN, GP_2_25_OUT,
+		GP_2_24_IN, GP_2_24_OUT,
+		GP_2_23_IN, GP_2_23_OUT,
+		GP_2_22_IN, GP_2_22_OUT,
+		GP_2_21_IN, GP_2_21_OUT,
+		GP_2_20_IN, GP_2_20_OUT,
+		GP_2_19_IN, GP_2_19_OUT,
+		GP_2_18_IN, GP_2_18_OUT,
+		GP_2_17_IN, GP_2_17_OUT,
+		GP_2_16_IN, GP_2_16_OUT,
+		GP_2_15_IN, GP_2_15_OUT,
+		GP_2_14_IN, GP_2_14_OUT,
+		GP_2_13_IN, GP_2_13_OUT,
+		GP_2_12_IN, GP_2_12_OUT,
+		GP_2_11_IN, GP_2_11_OUT,
+		GP_2_10_IN, GP_2_10_OUT,
+		GP_2_9_IN, GP_2_9_OUT,
+		GP_2_8_IN, GP_2_8_OUT,
+		GP_2_7_IN, GP_2_7_OUT,
+		GP_2_6_IN, GP_2_6_OUT,
+		GP_2_5_IN, GP_2_5_OUT,
+		GP_2_4_IN, GP_2_4_OUT,
+		GP_2_3_IN, GP_2_3_OUT,
+		GP_2_2_IN, GP_2_2_OUT,
+		GP_2_1_IN, GP_2_1_OUT,
+		GP_2_0_IN, GP_2_0_OUT, }
+	},
+	{ PINMUX_CFG_REG("INOUTSEL3", 0xE6053004, 32, 1) { GP_INOUTSEL(3) } },
+	{ PINMUX_CFG_REG("INOUTSEL4", 0xE6054004, 32, 1) { GP_INOUTSEL(4) } },
+	{ PINMUX_CFG_REG("INOUTSEL5", 0xE6055004, 32, 1) { GP_INOUTSEL(5) } },
+	{ },
+};
+
+static struct pinmux_data_reg pinmux_data_regs[] = {
+	{ PINMUX_DATA_REG("INDT0", 0xE6050008, 32) { GP_INDT(0) } },
+	{ PINMUX_DATA_REG("INDT1", 0xE6051008, 32) {
+		0, 0, GP_1_29_DATA, GP_1_28_DATA,
+		GP_1_27_DATA, GP_1_26_DATA, GP_1_25_DATA, GP_1_24_DATA,
+		GP_1_23_DATA, GP_1_22_DATA, GP_1_21_DATA, GP_1_20_DATA,
+		GP_1_19_DATA, GP_1_18_DATA, GP_1_17_DATA, GP_1_16_DATA,
+		GP_1_15_DATA, GP_1_14_DATA, GP_1_13_DATA, GP_1_12_DATA,
+		GP_1_11_DATA, GP_1_10_DATA, GP_1_9_DATA, GP_1_8_DATA,
+		GP_1_7_DATA, GP_1_6_DATA, GP_1_5_DATA, GP_1_4_DATA,
+		GP_1_3_DATA, GP_1_2_DATA, GP_1_1_DATA, GP_1_0_DATA }
+	},
+	{ PINMUX_DATA_REG("INDT2", 0xE6052008, 32) {
+		0, 0, GP_2_29_DATA, GP_2_28_DATA,
+		GP_2_27_DATA, GP_2_26_DATA, GP_2_25_DATA, GP_2_24_DATA,
+		GP_2_23_DATA, GP_2_22_DATA, GP_2_21_DATA, GP_2_20_DATA,
+		GP_2_19_DATA, GP_2_18_DATA, GP_2_17_DATA, GP_2_16_DATA,
+		GP_2_15_DATA, GP_2_14_DATA, GP_2_13_DATA, GP_2_12_DATA,
+		GP_2_11_DATA, GP_2_10_DATA, GP_2_9_DATA, GP_2_8_DATA,
+		GP_2_7_DATA, GP_2_6_DATA, GP_2_5_DATA, GP_2_4_DATA,
+		GP_2_3_DATA, GP_2_2_DATA, GP_2_1_DATA, GP_2_0_DATA }
+	},
+	{ PINMUX_DATA_REG("INDT3", 0xE6053008, 32) { GP_INDT(3) } },
+	{ PINMUX_DATA_REG("INDT4", 0xE6054008, 32) { GP_INDT(4) } },
+	{ PINMUX_DATA_REG("INDT5", 0xE6055008, 32) { GP_INDT(5) } },
+	{ },
+};
+
+static struct pinmux_info r8a7790_pinmux_info = {
+	.name = "r8a7790_pfc",
+
+	.unlock_reg = 0xe6060000, /* PMMR */
+
+	.reserved_id = PINMUX_RESERVED,
+	.data = { PINMUX_DATA_BEGIN, PINMUX_DATA_END },
+	.input = { PINMUX_INPUT_BEGIN, PINMUX_INPUT_END },
+	.output = { PINMUX_OUTPUT_BEGIN, PINMUX_OUTPUT_END },
+	.mark = { PINMUX_MARK_BEGIN, PINMUX_MARK_END },
+	.function = { PINMUX_FUNCTION_BEGIN, PINMUX_FUNCTION_END },
+
+	.first_gpio = GPIO_GP_0_0,
+	.last_gpio = GPIO_FN_MII_RXD2 /* GPIO_FN_TCLK1_B */,
+
+	.gpios = pinmux_gpios,
+	.cfg_regs = pinmux_config_regs,
+	.data_regs = pinmux_data_regs,
+
+	.gpio_data = pinmux_data,
+	.gpio_data_size = ARRAY_SIZE(pinmux_data),
+};
+
+void r8a7790_pinmux_init(void)
+{
+	register_pinmux(&r8a7790_pinmux_info);
+}
diff --git a/arch/arm/cpu/armv7/rmobile/pfc-r8a7790.h b/arch/arm/cpu/armv7/rmobile/pfc-r8a7790.h
new file mode 100644
index 0000000000..a13317be0b
--- /dev/null
+++ b/arch/arm/cpu/armv7/rmobile/pfc-r8a7790.h
@@ -0,0 +1,92 @@
+/*
+ * arch/arm/cpu/armv7/rmobile/pfc-r8a7790.h
+ *
+ * Copyright (C) 2013 Renesas Electronics Corporation
+ *
+ * SPDX-License-Identifier: GPL-2.0
+ */
+
+#ifndef __PFC_R8A7790_H__
+#define __PFC_R8A7790_H__
+
+#include <sh_pfc.h>
+#include <asm/gpio.h>
+
+#define CPU_32_PORT(fn, pfx, sfx)				\
+	PORT_10(fn, pfx, sfx), PORT_10(fn, pfx##1, sfx),	\
+	PORT_10(fn, pfx##2, sfx), PORT_1(fn, pfx##30, sfx),	\
+	PORT_1(fn, pfx##31, sfx)
+
+#define CPU_32_PORT2(fn, pfx, sfx)				\
+	PORT_10(fn, pfx, sfx), PORT_10(fn, pfx##1, sfx),	\
+	PORT_10(fn, pfx##2, sfx)
+
+#if defined(CONFIG_R8A7790)
+#define CPU_32_PORT1(fn, pfx, sfx)				\
+	PORT_10(fn, pfx, sfx), PORT_10(fn, pfx##1, sfx),	\
+	PORT_10(fn, pfx##2, sfx)				\
+/* GP_0_0_DATA -> GP_5_31_DATA (except for GP1[30],GP1[31],GP2[30],GP2[31]) */
+#define CPU_ALL_PORT(fn, pfx, sfx)				\
+	CPU_32_PORT(fn, pfx##_0_, sfx),				\
+	CPU_32_PORT1(fn, pfx##_1_, sfx),			\
+	CPU_32_PORT2(fn, pfx##_2_, sfx),			\
+	CPU_32_PORT(fn, pfx##_3_, sfx),				\
+	CPU_32_PORT(fn, pfx##_4_, sfx),				\
+	CPU_32_PORT(fn, pfx##_5_, sfx)
+
+#elif defined(CONFIG_R8A7791)
+#define CPU_32_PORT1(fn, pfx, sfx)				\
+	PORT_10(fn, pfx, sfx), PORT_10(fn, pfx##1, sfx),	\
+	PORT_1(fn, pfx##20, sfx), PORT_1(fn, pfx##21, sfx),	\
+	PORT_1(fn, pfx##22, sfx), PORT_1(fn, pfx##23, sfx),	\
+	PORT_1(fn, pfx##24, sfx), PORT_1(fn, pfx##25, sfx)
+
+/*
+ * GP_0_0_DATA -> GP_7_25_DATA
+ * (except for GP1[26],GP1[27],GP1[28],GP1[29]),GP1[30]),GP1[31]
+ *  GP7[26],GP7[27],GP7[28],GP7[29]),GP7[30]),GP7[31])
+ */
+#define CPU_ALL_PORT(fn, pfx, sfx)				\
+	CPU_32_PORT(fn, pfx##_0_, sfx),				\
+	CPU_32_PORT1(fn, pfx##_1_, sfx),			\
+	CPU_32_PORT(fn, pfx##_2_, sfx),				\
+	CPU_32_PORT(fn, pfx##_3_, sfx),				\
+	CPU_32_PORT(fn, pfx##_4_, sfx),				\
+	CPU_32_PORT(fn, pfx##_5_, sfx),				\
+	CPU_32_PORT(fn, pfx##_6_, sfx),				\
+	CPU_32_PORT1(fn, pfx##_7_, sfx)
+#else
+#error "NO support"
+#endif
+
+#define _GP_GPIO(pfx, sfx) PINMUX_GPIO(GPIO_GP##pfx, GP##pfx##_DATA)
+#define _GP_DATA(pfx, sfx) PINMUX_DATA(GP##pfx##_DATA, GP##pfx##_FN,	\
+				       GP##pfx##_IN, GP##pfx##_OUT)
+
+#define _GP_INOUTSEL(pfx, sfx) GP##pfx##_IN, GP##pfx##_OUT
+#define _GP_INDT(pfx, sfx) GP##pfx##_DATA
+
+#define GP_ALL(str)	CPU_ALL_PORT(_PORT_ALL, GP, str)
+#define PINMUX_GPIO_GP_ALL()	CPU_ALL_PORT(_GP_GPIO, , unused)
+#define PINMUX_DATA_GP_ALL()	CPU_ALL_PORT(_GP_DATA, , unused)
+
+#define PORT_10_REV(fn, pfx, sfx)				\
+	PORT_1(fn, pfx##9, sfx), PORT_1(fn, pfx##8, sfx),	\
+	PORT_1(fn, pfx##7, sfx), PORT_1(fn, pfx##6, sfx),	\
+	PORT_1(fn, pfx##5, sfx), PORT_1(fn, pfx##4, sfx),	\
+	PORT_1(fn, pfx##3, sfx), PORT_1(fn, pfx##2, sfx),	\
+	PORT_1(fn, pfx##1, sfx), PORT_1(fn, pfx##0, sfx)
+
+#define CPU_32_PORT_REV(fn, pfx, sfx)					\
+	PORT_1(fn, pfx##31, sfx), PORT_1(fn, pfx##30, sfx),		\
+	PORT_10_REV(fn, pfx##2, sfx), PORT_10_REV(fn, pfx##1, sfx),	\
+	PORT_10_REV(fn, pfx, sfx)
+
+#define GP_INOUTSEL(bank) CPU_32_PORT_REV(_GP_INOUTSEL, _##bank##_, unused)
+#define GP_INDT(bank) CPU_32_PORT_REV(_GP_INDT, _##bank##_, unused)
+
+#define PINMUX_IPSR_DATA(ipsr, fn) PINMUX_DATA(fn##_MARK, FN_##ipsr, FN_##fn)
+#define PINMUX_IPSR_MODSEL_DATA(ipsr, fn, ms) PINMUX_DATA(fn##_MARK, FN_##ms, \
+							  FN_##ipsr, FN_##fn)
+
+#endif /* __PFC_R8A7790_H__ */
diff --git a/arch/arm/cpu/armv7/rmobile/pfc-r8a7791.c b/arch/arm/cpu/armv7/rmobile/pfc-r8a7791.c
new file mode 100644
index 0000000000..f49f990a02
--- /dev/null
+++ b/arch/arm/cpu/armv7/rmobile/pfc-r8a7791.c
@@ -0,0 +1,1117 @@
+/*
+ * arch/arm/cpu/armv7/rmobile/pfc-r8a7791.c
+ *
+ * Copyright (C) 2013 Renesas Electronics Corporation
+ *
+ * SPDX-License-Identifier: GPL-2.0
+ */
+
+#include <common.h>
+#include <sh_pfc.h>
+#include <asm/gpio.h>
+#include "pfc-r8a7790.h"
+
+enum {
+	PINMUX_RESERVED = 0,
+
+	PINMUX_DATA_BEGIN,
+	GP_ALL(DATA),
+	PINMUX_DATA_END,
+
+	PINMUX_INPUT_BEGIN,
+	GP_ALL(IN),
+	PINMUX_INPUT_END,
+
+	PINMUX_OUTPUT_BEGIN,
+	GP_ALL(OUT),
+	PINMUX_OUTPUT_END,
+
+	PINMUX_FUNCTION_BEGIN,
+	GP_ALL(FN),
+
+	/* GPSR0 */
+	FN_IP0_0, FN_IP0_1, FN_IP0_2, FN_IP0_3, FN_IP0_4, FN_IP0_5,
+	FN_IP0_6, FN_IP0_7, FN_IP0_8, FN_IP0_9, FN_IP0_10, FN_IP0_11,
+	FN_IP0_12, FN_IP0_13, FN_IP0_14, FN_IP0_15, FN_IP0_18_16, FN_IP0_20_19,
+	FN_IP0_22_21, FN_IP0_24_23, FN_IP0_26_25, FN_IP0_28_27, FN_IP0_30_29,
+	FN_IP1_1_0, FN_IP1_3_2, FN_IP1_5_4, FN_IP1_7_6, FN_IP1_10_8,
+	FN_IP1_13_11, FN_IP1_16_14, FN_IP1_19_17, FN_IP1_22_20,
+
+	/* GPSR1 */
+	FN_IP1_25_23, FN_IP1_28_26, FN_IP1_31_29, FN_IP2_2_0, FN_IP2_4_3,
+	FN_IP2_6_5, FN_IP2_9_7, FN_IP2_12_10, FN_IP2_15_13, FN_IP2_18_16,
+	FN_IP2_20_19, FN_IP2_22_21, FN_EX_CS0_N, FN_IP2_24_23, FN_IP2_26_25,
+	FN_IP2_29_27, FN_IP3_2_0, FN_IP3_5_3, FN_IP3_8_6, FN_RD_N,
+	FN_IP3_11_9, FN_IP3_13_12, FN_IP3_15_14 , FN_IP3_17_16 , FN_IP3_19_18,
+	FN_IP3_21_20,
+
+	/* GPSR2 */
+	FN_IP3_27_25, FN_IP3_30_28, FN_IP4_1_0, FN_IP4_4_2, FN_IP4_7_5,
+	FN_IP4_9_8, FN_IP4_12_10, FN_IP4_15_13, FN_IP4_18_16, FN_IP4_19,
+	FN_IP4_20, FN_IP4_21, FN_IP4_23_22, FN_IP4_25_24, FN_IP4_27_26,
+	FN_IP4_30_28, FN_IP5_2_0, FN_IP5_5_3, FN_IP5_8_6, FN_IP5_11_9,
+	FN_IP5_14_12, FN_IP5_16_15, FN_IP5_19_17, FN_IP5_21_20, FN_IP5_23_22,
+	FN_IP5_25_24, FN_IP5_28_26, FN_IP5_31_29, FN_AUDIO_CLKA, FN_IP6_2_0,
+	FN_IP6_5_3, FN_IP6_7_6,
+
+	/* GPSR3 */
+	FN_IP7_5_3, FN_IP7_8_6, FN_IP7_10_9, FN_IP7_12_11, FN_IP7_14_13,
+	FN_IP7_16_15, FN_IP7_18_17, FN_IP7_20_19, FN_IP7_23_21, FN_IP7_26_24,
+	FN_IP7_29_27, FN_IP8_2_0, FN_IP8_5_3, FN_IP8_8_6, FN_IP8_11_9,
+	FN_IP8_14_12, FN_IP8_17_15, FN_IP8_20_18, FN_IP8_23_21, FN_IP8_25_24,
+	FN_IP8_27_26, FN_IP8_30_28, FN_IP9_2_0, FN_IP9_5_3, FN_IP9_6, FN_IP9_7,
+	FN_IP9_10_8, FN_IP9_11, FN_IP9_12, FN_IP9_15_13, FN_IP9_16,
+	FN_IP9_18_17,
+
+	/* GPSR4 */
+	FN_VI0_CLK, FN_IP9_20_19, FN_IP9_22_21, FN_IP9_24_23, FN_IP9_26_25,
+	FN_VI0_DATA0_VI0_B0, FN_VI0_DATA0_VI0_B1, FN_VI0_DATA0_VI0_B2,
+	FN_IP9_28_27, FN_VI0_DATA0_VI0_B4, FN_VI0_DATA0_VI0_B5,
+	FN_VI0_DATA0_VI0_B6, FN_VI0_DATA0_VI0_B7, FN_IP9_31_29, FN_IP10_2_0,
+	FN_IP10_5_3, FN_IP10_8_6, FN_IP10_11_9, FN_IP10_14_12, FN_IP10_16_15,
+	FN_IP10_18_17, FN_IP10_21_19, FN_IP10_24_22, FN_IP10_26_25,
+	FN_IP10_28_27, FN_IP10_31_29, FN_IP11_2_0, FN_IP11_5_3, FN_IP11_8_6,
+	FN_IP15_1_0, FN_IP15_3_2, FN_IP15_5_4,
+
+	/* GPSR5 */
+	FN_IP11_11_9, FN_IP11_14_12, FN_IP11_16_15, FN_IP11_18_17, FN_IP11_19,
+	FN_IP11_20, FN_IP11_21, FN_IP11_22, FN_IP11_23, FN_IP11_24,
+	FN_IP11_25, FN_IP11_26, FN_IP11_27, FN_IP11_29_28, FN_IP11_31_30,
+	FN_IP12_1_0, FN_IP12_3_2, FN_IP12_6_4, FN_IP12_9_7, FN_IP12_12_10,
+	FN_IP12_15_13, FN_IP12_17_16, FN_IP12_19_18, FN_IP12_21_20,
+	FN_IP12_23_22, FN_IP12_26_24, FN_IP12_29_27, FN_IP13_2_0, FN_IP13_4_3,
+	FN_IP13_6_5, FN_IP13_9_7, FN_IP3_24_22,
+
+	/* GPSR6 */
+	FN_IP13_10, FN_IP13_11, FN_IP13_12, FN_IP13_13, FN_IP13_14,
+	FN_IP13_15, FN_IP13_18_16, FN_IP13_21_19, FN_IP13_22, FN_IP13_24_23,
+	FN_IP13_25, FN_IP13_26, FN_IP13_27, FN_IP13_30_28, FN_IP14_1_0,
+	FN_IP14_2, FN_IP14_3, FN_IP14_4, FN_IP14_5, FN_IP14_6, FN_IP14_7,
+	FN_IP14_10_8, FN_IP14_13_11, FN_IP14_16_14, FN_IP14_19_17,
+	FN_IP14_22_20, FN_IP14_25_23, FN_IP14_28_26, FN_IP14_31_29,
+
+	/* GPSR7 */
+	FN_IP15_17_15, FN_IP15_20_18, FN_IP15_23_21, FN_IP15_26_24,
+	FN_IP15_29_27, FN_IP16_2_0, FN_IP16_5_3, FN_IP16_7_6, FN_IP16_9_8,
+	FN_IP16_11_10, FN_IP6_9_8, FN_IP6_11_10, FN_IP6_13_12, FN_IP6_15_14,
+	FN_IP6_18_16, FN_IP6_20_19, FN_IP6_23_21, FN_IP6_26_24, FN_IP6_29_27,
+	FN_IP7_2_0, FN_IP15_8_6, FN_IP15_11_9, FN_IP15_14_12,
+	FN_USB0_PWEN, FN_USB0_OVC, FN_USB1_PWEN,
+
+	/* IPSR0 -  IPSR10 */
+
+	/* IPSR11 */
+	FN_VI0_R5, FN_VI2_DATA6, FN_GLO_SDATA_B, FN_RX0_C, FN_SDA1_D,
+	FN_VI0_R6, FN_VI2_DATA7, FN_GLO_SS_B, FN_TX1_C, FN_SCL4_B,
+	FN_VI0_R7, FN_GLO_RFON_B, FN_RX1_C, FN_CAN0_RX_E,
+	FN_SDA4_B, FN_HRX1_D, FN_SCIFB0_RXD_D,
+	FN_VI1_HSYNC_N, FN_AVB_RXD0, FN_TS_SDATA0_B, FN_TX4_B, FN_SCIFA4_TXD_B,
+	FN_VI1_VSYNC_N, FN_AVB_RXD1, FN_TS_SCK0_B, FN_RX4_B, FN_SCIFA4_RXD_B,
+	FN_VI1_CLKENB, FN_AVB_RXD2, FN_TS_SDEN0_B,
+	FN_VI1_FIELD, FN_AVB_RXD3, FN_TS_SPSYNC0_B,
+	FN_VI1_CLK, FN_AVB_RXD4, FN_VI1_DATA0, FN_AVB_RXD5,
+	FN_VI1_DATA1, FN_AVB_RXD6, FN_VI1_DATA2, FN_AVB_RXD7,
+	FN_VI1_DATA3, FN_AVB_RX_ER, FN_VI1_DATA4, FN_AVB_MDIO,
+	FN_VI1_DATA5, FN_AVB_RX_DV, FN_VI1_DATA6, FN_AVB_MAGIC,
+	FN_VI1_DATA7, FN_AVB_MDC,
+	FN_ETH_MDIO, FN_AVB_RX_CLK, FN_SCL2_C,
+	FN_ETH_CRS_DV, FN_AVB_LINK, FN_SDA2_C,
+
+	/* IPSR12 */
+	FN_ETH_RX_ER, FN_AVB_CRS, FN_SCL3, FN_SCL7,
+	FN_ETH_RXD0, FN_AVB_PHY_INT, FN_SDA3, FN_SDA7,
+	FN_ETH_RXD1, FN_AVB_GTXREFCLK, FN_CAN0_TX_C,
+	FN_SCL2_D, FN_MSIOF1_RXD_E,
+	FN_ETH_LINK, FN_AVB_TXD0, FN_CAN0_RX_C, FN_SDA2_D, FN_MSIOF1_SCK_E,
+	FN_ETH_REFCLK, FN_AVB_TXD1, FN_SCIFA3_RXD_B,
+	FN_CAN1_RX_C, FN_MSIOF1_SYNC_E,
+	FN_ETH_TXD1, FN_AVB_TXD2, FN_SCIFA3_TXD_B,
+	FN_CAN1_TX_C, FN_MSIOF1_TXD_E,
+	FN_ETH_TX_EN, FN_AVB_TXD3, FN_TCLK1_B, FN_CAN_CLK_B,
+	FN_ETH_MAGIC, FN_AVB_TXD4, FN_IETX_C,
+	FN_ETH_TXD0, FN_AVB_TXD5, FN_IECLK_C,
+	FN_ETH_MDC, FN_AVB_TXD6, FN_IERX_C,
+	FN_STP_IVCXO27_0, FN_AVB_TXD7, FN_SCIFB2_TXD_D,
+	FN_ADIDATA_B, FN_MSIOF0_SYNC_C,
+	FN_STP_ISCLK_0, FN_AVB_TX_EN, FN_SCIFB2_RXD_D,
+	FN_ADICS_SAMP_B, FN_MSIOF0_SCK_C,
+
+	/* IPSR13 */
+	/* MOD_SEL */
+	FN_SEL_SCIF1_0, FN_SEL_SCIF1_1, FN_SEL_SCIF1_2, FN_SEL_SCIF1_3,
+	FN_SEL_SCIFB_0, FN_SEL_SCIFB_1, FN_SEL_SCIFB_2, FN_SEL_SCIFB_3,
+	FN_SEL_SCIFB2_0, FN_SEL_SCIFB2_1, FN_SEL_SCIFB2_2, FN_SEL_SCIFB2_3,
+	FN_SEL_SCIFB1_0, FN_SEL_SCIFB1_1, FN_SEL_SCIFB1_2, FN_SEL_SCIFB1_3,
+	FN_SEL_SCIFA1_0, FN_SEL_SCIFA1_1, FN_SEL_SCIFA1_2,
+	FN_SEL_SSI9_0, FN_SEL_SSI9_1,
+	FN_SEL_SCFA_0, FN_SEL_SCFA_1,
+	FN_SEL_QSP_0, FN_SEL_QSP_1,
+	FN_SEL_SSI7_0, FN_SEL_SSI7_1,
+	FN_SEL_HSCIF1_0, FN_SEL_HSCIF1_1, FN_SEL_HSCIF1_2, FN_SEL_HSCIF1_3,
+	FN_SEL_HSCIF1_4,
+	FN_SEL_VI1_0, FN_SEL_VI1_1, FN_SEL_VI1_2,
+	FN_SEL_TMU1_0, FN_SEL_TMU1_1,
+	FN_SEL_LBS_0, FN_SEL_LBS_1, FN_SEL_LBS_2, FN_SEL_LBS_3,
+	FN_SEL_TSIF0_0, FN_SEL_TSIF0_1, FN_SEL_TSIF0_2, FN_SEL_TSIF0_3,
+	FN_SEL_SOF0_0, FN_SEL_SOF0_1, FN_SEL_SOF0_2,
+
+	/* MOD_SEL2 */
+	FN_SEL_SCIF0_0, FN_SEL_SCIF0_1, FN_SEL_SCIF0_2, FN_SEL_SCIF0_3,
+	FN_SEL_SCIF0_4,
+	FN_SEL_SCIF_0, FN_SEL_SCIF_1,
+	FN_SEL_CAN0_0, FN_SEL_CAN0_1, FN_SEL_CAN0_2, FN_SEL_CAN0_3,
+	FN_SEL_CAN0_4, FN_SEL_CAN0_5,
+	FN_SEL_CAN1_0, FN_SEL_CAN1_1, FN_SEL_CAN1_2, FN_SEL_CAN1_3,
+	FN_SEL_SCIFA2_0, FN_SEL_SCIFA2_1,
+	FN_SEL_SCIF4_0, FN_SEL_SCIF4_1, FN_SEL_SCIF4_2,
+	FN_SEL_ADG_0, FN_SEL_ADG_1,
+	FN_SEL_FM_0, FN_SEL_FM_1, FN_SEL_FM_2, FN_SEL_FM_3, FN_SEL_FM_4,
+	FN_SEL_SCIFA5_0, FN_SEL_SCIFA5_1, FN_SEL_SCIFA5_2,
+	FN_SEL_GPS_0, FN_SEL_GPS_1, FN_SEL_GPS_2, FN_SEL_GPS_3,
+	FN_SEL_SCIFA4_0, FN_SEL_SCIFA4_1, FN_SEL_SCIFA4_2,
+	FN_SEL_SCIFA3_0, FN_SEL_SCIFA3_1, FN_SEL_SCIFA3_2,
+	FN_SEL_SIM_0, FN_SEL_SIM_1,
+	FN_SEL_SSI8_0, FN_SEL_SSI8_1,
+
+	/* MOD_SEL3 */
+	FN_SEL_HSCIF2_0, FN_SEL_HSCIF2_1, FN_SEL_HSCIF2_2, FN_SEL_HSCIF2_3,
+	FN_SEL_CANCLK_0, FN_SEL_CANCLK_1, FN_SEL_CANCLK_2, FN_SEL_CANCLK_3,
+	FN_SEL_IIC8_0, FN_SEL_IIC8_1, FN_SEL_IIC8_2,
+	FN_SEL_IIC7_0, FN_SEL_IIC7_1, FN_SEL_IIC7_2,
+	FN_SEL_IIC4_0, FN_SEL_IIC4_1, FN_SEL_IIC4_2,
+	FN_SEL_IIC3_0, FN_SEL_IIC3_1, FN_SEL_IIC3_2, FN_SEL_IIC3_3,
+	FN_SEL_SCIF3_0, FN_SEL_SCIF3_1, FN_SEL_SCIF3_2, FN_SEL_SCIF3_3,
+	FN_SEL_IEB_0, FN_SEL_IEB_1, FN_SEL_IEB_2,
+	FN_SEL_MMC_0, FN_SEL_MMC_1,
+	FN_SEL_SCIF5_0, FN_SEL_SCIF5_1,
+	FN_SEL_IIC2_0, FN_SEL_IIC2_1, FN_SEL_IIC2_2, FN_SEL_IIC2_3,
+	FN_SEL_IIC1_0, FN_SEL_IIC1_1, FN_SEL_IIC1_2, FN_SEL_IIC1_3,
+	FN_SEL_IIC1_4,
+	FN_SEL_IIC0_0, FN_SEL_IIC0_1, FN_SEL_IIC0_2,
+
+	/* MOD_SEL4 */
+	FN_SEL_SOF1_0, FN_SEL_SOF1_1, FN_SEL_SOF1_2, FN_SEL_SOF1_3,
+	FN_SEL_SOF1_4,
+	FN_SEL_HSCIF0_0, FN_SEL_HSCIF0_1, FN_SEL_HSCIF0_2,
+	FN_SEL_DIS_0, FN_SEL_DIS_1, FN_SEL_DIS_2,
+	FN_SEL_RAD_0, FN_SEL_RAD_1,
+	FN_SEL_RCN_0, FN_SEL_RCN_1,
+	FN_SEL_RSP_0, FN_SEL_RSP_1,
+	FN_SEL_SCIF2_0, FN_SEL_SCIF2_1, FN_SEL_SCIF2_2, FN_SEL_SCIF2_3,
+	FN_SEL_SCIF2_4,
+	FN_SEL_SOF2_0, FN_SEL_SOF2_1, FN_SEL_SOF2_2, FN_SEL_SOF2_3,
+	FN_SEL_SOF2_4,
+	FN_SEL_SSI1_0, FN_SEL_SSI1_1,
+	FN_SEL_SSI0_0, FN_SEL_SSI0_1,
+	FN_SEL_SSP_0, FN_SEL_SSP_1, FN_SEL_SSP_2,
+	PINMUX_FUNCTION_END,
+
+	PINMUX_MARK_BEGIN,
+
+	EX_CS0_N_MARK, RD_N_MARK,
+
+	AUDIO_CLKA_MARK,
+
+	VI0_CLK_MARK, VI0_DATA0_VI0_B0_MARK, VI0_DATA0_VI0_B1_MARK,
+	VI0_DATA0_VI0_B2_MARK, VI0_DATA0_VI0_B4_MARK, VI0_DATA0_VI0_B5_MARK,
+	VI0_DATA0_VI0_B6_MARK, VI0_DATA0_VI0_B7_MARK,
+
+	USB0_PWEN_MARK, USB0_OVC_MARK, USB1_PWEN_MARK,
+
+	/* IPSR0  IPSR10 */
+	/* IPSR11 */
+	VI0_R5_MARK, VI2_DATA6_MARK, GLO_SDATA_B_MARK, RX0_C_MARK, SDA1_D_MARK,
+	VI0_R6_MARK, VI2_DATA7_MARK, GLO_SS_B_MARK, TX1_C_MARK, SCL4_B_MARK,
+	VI0_R7_MARK, GLO_RFON_B_MARK, RX1_C_MARK, CAN0_RX_E_MARK,
+	SDA4_B_MARK, _MARK, HRX1_D_MARK, SCIFB0_RXD_D_MARK,
+	VI1_HSYNC_N_MARK, AVB_RXD0_MARK, TS_SDATA0_B_MARK,
+	TX4_B_MARK, SCIFA4_TXD_B_MARK,
+	VI1_VSYNC_N_MARK, AVB_RXD1_MARK, TS_SCK0_B_MARK,
+	RX4_B_MARK, SCIFA4_RXD_B_MARK,
+	VI1_CLKENB_MARK, AVB_RXD2_MARK, TS_SDEN0_B_MARK,
+	VI1_FIELD_MARK, AVB_RXD3_MARK, TS_SPSYNC0_B_MARK,
+	VI1_CLK_MARK, AVB_RXD4_MARK, VI1_DATA0_MARK, AVB_RXD5_MARK,
+	VI1_DATA1_MARK, AVB_RXD6_MARK, VI1_DATA2_MARK, AVB_RXD7_MARK,
+	VI1_DATA3_MARK, AVB_RX_ER_MARK, VI1_DATA4_MARK, AVB_MDIO_MARK,
+	VI1_DATA5_MARK, AVB_RX_DV_MARK, VI1_DATA6_MARK, AVB_MAGIC_MARK,
+	VI1_DATA7_MARK, AVB_MDC_MARK,
+	ETH_MDIO_MARK, AVB_RX_CLK_MARK, SCL2_C_MARK,
+	ETH_CRS_DV_MARK, AVB_LINK_MARK, SDA2_C_MARK,
+
+	/* IPSR12 */
+	ETH_RX_ER_MARK, AVB_CRS_MARK, SCL3_MARK, SCL7_MARK,
+	ETH_RXD0_MARK, AVB_PHY_INT_MARK, SDA3_MARK, SDA7_MARK,
+	ETH_RXD1_MARK, AVB_GTXREFCLK_MARK, CAN0_TX_C_MARK,
+	SCL2_D_MARK, MSIOF1_RXD_E_MARK,
+	ETH_LINK_MARK, AVB_TXD0_MARK, CAN0_RX_C_MARK,
+	SDA2_D_MARK, MSIOF1_SCK_E_MARK,
+	ETH_REFCLK_MARK, AVB_TXD1_MARK, SCIFA3_RXD_B_MARK,
+	CAN1_RX_C_MARK, MSIOF1_SYNC_E_MARK,
+	ETH_TXD1_MARK, AVB_TXD2_MARK, SCIFA3_TXD_B_MARK,
+	CAN1_TX_C_MARK, MSIOF1_TXD_E_MARK,
+	ETH_TX_EN_MARK, AVB_TXD3_MARK, TCLK1_B_MARK, CAN_CLK_B_MARK,
+	ETH_MAGIC_MARK, AVB_TXD4_MARK, IETX_C_MARK,
+	ETH_TXD0_MARK, AVB_TXD5_MARK, IECLK_C_MARK,
+	ETH_MDC_MARK, AVB_TXD6_MARK, IERX_C_MARK,
+	STP_IVCXO27_0_MARK, AVB_TXD7_MARK, SCIFB2_TXD_D_MARK,
+	ADIDATA_B_MARK, MSIOF0_SYNC_C_MARK,
+	STP_ISCLK_0_MARK, AVB_TX_EN_MARK, SCIFB2_RXD_D_MARK,
+	ADICS_SAMP_B_MARK, MSIOF0_SCK_C_MARK,
+
+	/* IPSR13 */
+	PINMUX_MARK_END,
+};
+
+static pinmux_enum_t pinmux_data[] = {
+	PINMUX_DATA_GP_ALL(), /* PINMUX_DATA(GP_M_N_DATA, GP_M_N_FN...), */
+
+	/* OTHER IPSR0  - IPSR10 */
+	/* IPSR11 */
+	PINMUX_IPSR_DATA(IP11_2_0, VI0_R5),
+	PINMUX_IPSR_DATA(IP11_2_0, VI2_DATA6),
+	PINMUX_IPSR_MODSEL_DATA(IP11_2_0, GLO_SDATA_B, SEL_GPS_1),
+	PINMUX_IPSR_MODSEL_DATA(IP11_2_0, RX0_C, SEL_SCIF0_2),
+	PINMUX_IPSR_MODSEL_DATA(IP11_2_0, SDA1_D, SEL_IIC1_3),
+	PINMUX_IPSR_DATA(IP11_5_3, VI0_R6),
+	PINMUX_IPSR_DATA(IP11_5_3, VI2_DATA7),
+	PINMUX_IPSR_MODSEL_DATA(IP11_5_3, GLO_SS_B, SEL_GPS_1),
+	PINMUX_IPSR_MODSEL_DATA(IP11_5_3, TX1_C, SEL_SCIF1_2),
+	PINMUX_IPSR_MODSEL_DATA(IP11_5_3, SCL4_B, SEL_IIC4_1),
+	PINMUX_IPSR_DATA(IP11_8_6, VI0_R7),
+	PINMUX_IPSR_MODSEL_DATA(IP11_8_6, GLO_RFON_B, SEL_GPS_1),
+	PINMUX_IPSR_MODSEL_DATA(IP11_8_6, RX1_C, SEL_SCIF1_2),
+	PINMUX_IPSR_MODSEL_DATA(IP11_8_6, CAN0_RX_E, SEL_CAN0_4),
+	PINMUX_IPSR_MODSEL_DATA(IP11_8_6, SDA4_B, SEL_IIC4_1),
+	PINMUX_IPSR_MODSEL_DATA(IP11_8_6, HRX1_D, SEL_HSCIF1_3),
+	PINMUX_IPSR_MODSEL_DATA(IP11_8_6, SCIFB0_RXD_D, SEL_SCIFB_3),
+	PINMUX_IPSR_MODSEL_DATA(IP11_11_9, VI1_HSYNC_N, SEL_VI1_0),
+	PINMUX_IPSR_DATA(IP11_11_9, AVB_RXD0),
+	PINMUX_IPSR_MODSEL_DATA(IP11_11_9, TS_SDATA0_B, SEL_TSIF0_1),
+	PINMUX_IPSR_MODSEL_DATA(IP11_11_9, TX4_B, SEL_SCIF4_1),
+	PINMUX_IPSR_MODSEL_DATA(IP11_11_9, SCIFA4_TXD_B, SEL_SCIFA4_1),
+	PINMUX_IPSR_MODSEL_DATA(IP11_14_12, VI1_VSYNC_N, SEL_VI1_0),
+	PINMUX_IPSR_DATA(IP11_14_12, AVB_RXD1),
+	PINMUX_IPSR_MODSEL_DATA(IP11_14_12, TS_SCK0_B, SEL_TSIF0_1),
+	PINMUX_IPSR_MODSEL_DATA(IP11_14_12, RX4_B, SEL_SCIF4_1),
+	PINMUX_IPSR_MODSEL_DATA(IP11_14_12, SCIFA4_RXD_B, SEL_SCIFA4_1),
+	PINMUX_IPSR_MODSEL_DATA(IP11_16_15, VI1_CLKENB, SEL_VI1_0),
+	PINMUX_IPSR_DATA(IP11_16_15, AVB_RXD2),
+	PINMUX_IPSR_MODSEL_DATA(IP11_16_15, TS_SDEN0_B, SEL_TSIF0_1),
+	PINMUX_IPSR_MODSEL_DATA(IP11_18_17, VI1_FIELD, SEL_VI1_0),
+	PINMUX_IPSR_DATA(IP11_18_17, AVB_RXD3),
+	PINMUX_IPSR_MODSEL_DATA(IP11_18_17, TS_SPSYNC0_B, SEL_TSIF0_1),
+	PINMUX_IPSR_MODSEL_DATA(IP11_19, VI1_CLK, SEL_VI1_0),
+	PINMUX_IPSR_DATA(IP11_19, AVB_RXD4),
+	PINMUX_IPSR_MODSEL_DATA(IP11_20, VI1_DATA0, SEL_VI1_0),
+	PINMUX_IPSR_DATA(IP11_20, AVB_RXD5),
+	PINMUX_IPSR_MODSEL_DATA(IP11_21, VI1_DATA1, SEL_VI1_0),
+	PINMUX_IPSR_DATA(IP11_21, AVB_RXD6),
+	PINMUX_IPSR_MODSEL_DATA(IP11_22, VI1_DATA2, SEL_VI1_0),
+	PINMUX_IPSR_DATA(IP11_22, AVB_RXD7),
+	PINMUX_IPSR_MODSEL_DATA(IP11_23, VI1_DATA3, SEL_VI1_0),
+	PINMUX_IPSR_DATA(IP11_23, AVB_RX_ER),
+	PINMUX_IPSR_MODSEL_DATA(IP11_24, VI1_DATA4, SEL_VI1_0),
+	PINMUX_IPSR_DATA(IP11_24, AVB_MDIO),
+	PINMUX_IPSR_MODSEL_DATA(IP11_25, VI1_DATA5, SEL_VI1_0),
+	PINMUX_IPSR_DATA(IP11_25, AVB_RX_DV),
+	PINMUX_IPSR_MODSEL_DATA(IP11_26, VI1_DATA6, SEL_VI1_0),
+	PINMUX_IPSR_DATA(IP11_26, AVB_MAGIC),
+	PINMUX_IPSR_MODSEL_DATA(IP11_27, VI1_DATA7, SEL_VI1_0),
+	PINMUX_IPSR_DATA(IP11_27, AVB_MDC),
+	PINMUX_IPSR_DATA(IP11_29_28, ETH_MDIO),
+	PINMUX_IPSR_DATA(IP11_29_28, AVB_RX_CLK),
+	PINMUX_IPSR_MODSEL_DATA(IP11_29_28, SCL2_C, SEL_IIC2_2),
+	PINMUX_IPSR_DATA(IP11_31_30, ETH_CRS_DV),
+	PINMUX_IPSR_DATA(IP11_31_30, AVB_LINK),
+	PINMUX_IPSR_MODSEL_DATA(IP11_31_30, SDA2_C, SEL_IIC2_2),
+
+	/* IPSR12 */
+	PINMUX_IPSR_DATA(IP12_1_0, ETH_RX_ER),
+	PINMUX_IPSR_DATA(IP12_1_0, AVB_CRS),
+	PINMUX_IPSR_MODSEL_DATA(IP12_1_0, SCL3, SEL_IIC3_0),
+	PINMUX_IPSR_MODSEL_DATA(IP12_1_0, SCL7, SEL_IIC7_0),
+	PINMUX_IPSR_DATA(IP12_3_2, ETH_RXD0),
+	PINMUX_IPSR_DATA(IP12_3_2, AVB_PHY_INT),
+	PINMUX_IPSR_MODSEL_DATA(IP12_3_2, SDA3, SEL_IIC3_0),
+	PINMUX_IPSR_MODSEL_DATA(IP12_3_2, SDA7, SEL_IIC7_0),
+	PINMUX_IPSR_DATA(IP12_6_4, ETH_RXD1),
+	PINMUX_IPSR_DATA(IP12_6_4, AVB_GTXREFCLK),
+	PINMUX_IPSR_MODSEL_DATA(IP12_6_4, CAN0_TX_C, SEL_CAN0_2),
+	PINMUX_IPSR_MODSEL_DATA(IP12_6_4, SCL2_D, SEL_IIC2_3),
+	PINMUX_IPSR_MODSEL_DATA(IP12_6_4, MSIOF1_RXD_E, SEL_SOF1_4),
+	PINMUX_IPSR_DATA(IP12_9_7, ETH_LINK),
+	PINMUX_IPSR_DATA(IP12_9_7, AVB_TXD0),
+	PINMUX_IPSR_MODSEL_DATA(IP12_9_7, CAN0_RX_C, SEL_CAN0_2),
+	PINMUX_IPSR_MODSEL_DATA(IP12_9_7, SDA2_D, SEL_IIC2_3),
+	PINMUX_IPSR_MODSEL_DATA(IP12_9_7, MSIOF1_SCK_E, SEL_SOF1_4),
+	PINMUX_IPSR_DATA(IP12_12_10, ETH_REFCLK),
+	PINMUX_IPSR_DATA(IP12_12_10, AVB_TXD1),
+	PINMUX_IPSR_MODSEL_DATA(IP12_12_10, SCIFA3_RXD_B, SEL_SCIFA3_1),
+	PINMUX_IPSR_MODSEL_DATA(IP12_12_10, CAN1_RX_C, SEL_CAN1_2),
+	PINMUX_IPSR_MODSEL_DATA(IP12_12_10, MSIOF1_SYNC_E, SEL_SOF1_4),
+	PINMUX_IPSR_DATA(IP12_15_13, ETH_TXD1),
+	PINMUX_IPSR_DATA(IP12_15_13, AVB_TXD2),
+	PINMUX_IPSR_MODSEL_DATA(IP12_15_13, SCIFA3_TXD_B, SEL_SCIFA3_1),
+	PINMUX_IPSR_MODSEL_DATA(IP12_15_13, CAN1_TX_C, SEL_CAN1_2),
+	PINMUX_IPSR_MODSEL_DATA(IP12_15_13, MSIOF1_TXD_E, SEL_SOF1_4),
+	PINMUX_IPSR_DATA(IP12_17_16, ETH_TX_EN),
+	PINMUX_IPSR_DATA(IP12_17_16, AVB_TXD3),
+	PINMUX_IPSR_MODSEL_DATA(IP12_17_16, TCLK1_B, SEL_TMU1_0),
+	PINMUX_IPSR_MODSEL_DATA(IP12_17_16, CAN_CLK_B, SEL_CANCLK_1),
+	PINMUX_IPSR_DATA(IP12_19_18, ETH_MAGIC),
+	PINMUX_IPSR_DATA(IP12_19_18, AVB_TXD4),
+	PINMUX_IPSR_MODSEL_DATA(IP12_19_18, IETX_C, SEL_IEB_2),
+	PINMUX_IPSR_DATA(IP12_21_20, ETH_TXD0),
+	PINMUX_IPSR_DATA(IP12_21_20, AVB_TXD5),
+	PINMUX_IPSR_MODSEL_DATA(IP12_21_20, IECLK_C, SEL_IEB_2),
+	PINMUX_IPSR_DATA(IP12_23_22, ETH_MDC),
+	PINMUX_IPSR_DATA(IP12_23_22, AVB_TXD6),
+	PINMUX_IPSR_MODSEL_DATA(IP12_23_22, IERX_C, SEL_IEB_2),
+	PINMUX_IPSR_MODSEL_DATA(IP12_26_24, STP_IVCXO27_0, SEL_SSP_0),
+	PINMUX_IPSR_DATA(IP12_26_24, AVB_TXD7),
+	PINMUX_IPSR_MODSEL_DATA(IP12_26_24, SCIFB2_TXD_D, SEL_SCIFB2_3),
+	PINMUX_IPSR_MODSEL_DATA(IP12_26_24, ADIDATA_B, SEL_RAD_1),
+	PINMUX_IPSR_MODSEL_DATA(IP12_26_24, MSIOF0_SYNC_C, SEL_SOF0_2),
+	PINMUX_IPSR_MODSEL_DATA(IP12_29_27, STP_ISCLK_0, SEL_SSP_0),
+	PINMUX_IPSR_DATA(IP12_29_27, AVB_TX_EN),
+	PINMUX_IPSR_MODSEL_DATA(IP12_29_27, SCIFB2_RXD_D, SEL_SCIFB2_3),
+	PINMUX_IPSR_MODSEL_DATA(IP12_29_27, ADICS_SAMP_B, SEL_RAD_1),
+	PINMUX_IPSR_MODSEL_DATA(IP12_29_27, MSIOF0_SCK_C, SEL_SOF0_2),
+
+	/* IPSR13 - IPSR16 */
+};
+
+static struct pinmux_gpio pinmux_gpios[] = {
+	PINMUX_GPIO_GP_ALL(),
+
+	/* OTHER, IPSR0 - IPSR10 */
+	/* IPSR11 */
+	GPIO_FN(VI0_R5), GPIO_FN(VI2_DATA6), GPIO_FN(GLO_SDATA_B),
+	GPIO_FN(RX0_C), GPIO_FN(SDA1_D),
+	GPIO_FN(VI0_R6), GPIO_FN(VI2_DATA7),
+	GPIO_FN(GLO_SS_B), GPIO_FN(TX1_C), GPIO_FN(SCL4_B),
+	GPIO_FN(VI0_R7), GPIO_FN(GLO_RFON_B),
+	GPIO_FN(RX1_C), GPIO_FN(CAN0_RX_E),
+	GPIO_FN(SDA4_B), GPIO_FN(HRX1_D), GPIO_FN(SCIFB0_RXD_D),
+	GPIO_FN(VI1_HSYNC_N), GPIO_FN(AVB_RXD0), GPIO_FN(TS_SDATA0_B),
+	GPIO_FN(TX4_B), GPIO_FN(SCIFA4_TXD_B),
+	GPIO_FN(VI1_VSYNC_N), GPIO_FN(AVB_RXD1), GPIO_FN(TS_SCK0_B),
+	GPIO_FN(RX4_B), GPIO_FN(SCIFA4_RXD_B),
+	GPIO_FN(VI1_CLKENB), GPIO_FN(AVB_RXD2), GPIO_FN(TS_SDEN0_B),
+	GPIO_FN(VI1_FIELD), GPIO_FN(AVB_RXD3), GPIO_FN(TS_SPSYNC0_B),
+	GPIO_FN(VI1_CLK), GPIO_FN(AVB_RXD4),
+	GPIO_FN(VI1_DATA0), GPIO_FN(AVB_RXD5),
+	GPIO_FN(VI1_DATA1), GPIO_FN(AVB_RXD6),
+	GPIO_FN(VI1_DATA2), GPIO_FN(AVB_RXD7),
+	GPIO_FN(VI1_DATA3), GPIO_FN(AVB_RX_ER),
+	GPIO_FN(VI1_DATA4), GPIO_FN(AVB_MDIO),
+	GPIO_FN(VI1_DATA5), GPIO_FN(AVB_RX_DV),
+	GPIO_FN(VI1_DATA6), GPIO_FN(AVB_MAGIC),
+	GPIO_FN(VI1_DATA7), GPIO_FN(AVB_MDC),
+	GPIO_FN(ETH_MDIO), GPIO_FN(AVB_RX_CLK), GPIO_FN(SCL2_C),
+	GPIO_FN(ETH_CRS_DV), GPIO_FN(AVB_LINK), GPIO_FN(SDA2_C),
+
+	/* IPSR12 */
+	GPIO_FN(ETH_RX_ER), GPIO_FN(AVB_CRS), GPIO_FN(SCL3), GPIO_FN(SCL7),
+	GPIO_FN(ETH_RXD0), GPIO_FN(AVB_PHY_INT), GPIO_FN(SDA3), GPIO_FN(SDA7),
+	GPIO_FN(ETH_RXD1), GPIO_FN(AVB_GTXREFCLK), GPIO_FN(CAN0_TX_C),
+	GPIO_FN(SCL2_D), GPIO_FN(MSIOF1_RXD_E),
+	GPIO_FN(ETH_LINK), GPIO_FN(AVB_TXD0), GPIO_FN(CAN0_RX_C),
+	GPIO_FN(SDA2_D), GPIO_FN(MSIOF1_SCK_E),
+	GPIO_FN(ETH_REFCLK), GPIO_FN(AVB_TXD1), GPIO_FN(SCIFA3_RXD_B),
+	GPIO_FN(CAN1_RX_C), GPIO_FN(MSIOF1_SYNC_E),
+	GPIO_FN(ETH_TXD1), GPIO_FN(AVB_TXD2), GPIO_FN(SCIFA3_TXD_B),
+	GPIO_FN(CAN1_TX_C), GPIO_FN(MSIOF1_TXD_E),
+	GPIO_FN(ETH_TX_EN), GPIO_FN(AVB_TXD3),
+	GPIO_FN(TCLK1_B), GPIO_FN(CAN_CLK_B),
+	GPIO_FN(ETH_MAGIC), GPIO_FN(AVB_TXD4), GPIO_FN(IETX_C),
+	GPIO_FN(ETH_TXD0), GPIO_FN(AVB_TXD5), GPIO_FN(IECLK_C),
+	GPIO_FN(ETH_MDC), GPIO_FN(AVB_TXD6), GPIO_FN(IERX_C),
+	GPIO_FN(STP_IVCXO27_0), GPIO_FN(AVB_TXD7), GPIO_FN(SCIFB2_TXD_D),
+	GPIO_FN(ADIDATA_B), GPIO_FN(MSIOF0_SYNC_C),
+	GPIO_FN(STP_ISCLK_0), GPIO_FN(AVB_TX_EN), GPIO_FN(SCIFB2_RXD_D),
+	GPIO_FN(ADICS_SAMP_B), GPIO_FN(MSIOF0_SCK_C),
+
+	/* IPSR13 - IPSR16 */
+};
+
+static struct pinmux_cfg_reg pinmux_config_regs[] = {
+	{ PINMUX_CFG_REG("GPSR0", 0xE6060004, 32, 1) {
+		GP_0_31_FN, FN_IP1_22_20,
+		GP_0_30_FN, FN_IP1_19_17,
+		GP_0_29_FN, FN_IP1_16_14,
+		GP_0_28_FN, FN_IP1_13_11,
+		GP_0_27_FN, FN_IP1_10_8,
+		GP_0_26_FN, FN_IP1_7_6,
+		GP_0_25_FN, FN_IP1_5_4,
+		GP_0_24_FN, FN_IP1_3_2,
+		GP_0_23_FN, FN_IP1_1_0,
+		GP_0_22_FN, FN_IP0_30_29,
+		GP_0_21_FN, FN_IP0_28_27,
+		GP_0_20_FN, FN_IP0_26_25,
+		GP_0_19_FN, FN_IP0_24_23,
+		GP_0_18_FN, FN_IP0_22_21,
+		GP_0_17_FN, FN_IP0_20_19,
+		GP_0_16_FN, FN_IP0_18_16,
+		GP_0_15_FN, FN_IP0_15,
+		GP_0_14_FN, FN_IP0_14,
+		GP_0_13_FN, FN_IP0_13,
+		GP_0_12_FN, FN_IP0_12,
+		GP_0_11_FN, FN_IP0_11,
+		GP_0_10_FN, FN_IP0_10,
+		GP_0_9_FN, FN_IP0_9,
+		GP_0_8_FN, FN_IP0_8,
+		GP_0_7_FN, FN_IP0_7,
+		GP_0_6_FN, FN_IP0_6,
+		GP_0_5_FN, FN_IP0_5,
+		GP_0_4_FN, FN_IP0_4,
+		GP_0_3_FN, FN_IP0_3,
+		GP_0_2_FN, FN_IP0_2,
+		GP_0_1_FN, FN_IP0_1,
+		GP_0_0_FN, FN_IP0_0, }
+	},
+	{ PINMUX_CFG_REG("GPSR1", 0xE6060008, 32, 1) {
+		0, 0,
+		0, 0,
+		0, 0,
+		0, 0,
+		0, 0,
+		0, 0,
+		GP_1_25_FN, FN_IP3_21_20,
+		GP_1_24_FN, FN_IP3_19_18,
+		GP_1_23_FN, FN_IP3_17_16,
+		GP_1_22_FN, FN_IP3_15_14,
+		GP_1_21_FN, FN_IP3_13_12,
+		GP_1_20_FN, FN_IP3_11_9,
+		GP_1_19_FN, FN_RD_N,
+		GP_1_18_FN, FN_IP3_8_6,
+		GP_1_17_FN, FN_IP3_5_3,
+		GP_1_16_FN, FN_IP3_2_0,
+		GP_1_15_FN, FN_IP2_29_27,
+		GP_1_14_FN, FN_IP2_26_25,
+		GP_1_13_FN, FN_IP2_24_23,
+		GP_1_12_FN, FN_EX_CS0_N,
+		GP_1_11_FN, FN_IP2_22_21,
+		GP_1_10_FN, FN_IP2_20_19,
+		GP_1_9_FN, FN_IP2_18_16,
+		GP_1_8_FN, FN_IP2_15_13,
+		GP_1_7_FN, FN_IP2_12_10,
+		GP_1_6_FN, FN_IP2_9_7,
+		GP_1_5_FN, FN_IP2_6_5,
+		GP_1_4_FN, FN_IP2_4_3,
+		GP_1_3_FN, FN_IP2_2_0,
+		GP_1_2_FN, FN_IP1_31_29,
+		GP_1_1_FN, FN_IP1_28_26,
+		GP_1_0_FN, FN_IP1_25_23, }
+	},
+	{ PINMUX_CFG_REG("GPSR2", 0xE606000C, 32, 1) {
+		GP_2_31_FN, FN_IP6_7_6,
+		GP_2_30_FN, FN_IP6_5_3,
+		GP_2_29_FN, FN_IP6_2_0,
+		GP_2_28_FN, FN_AUDIO_CLKA,
+		GP_2_27_FN, FN_IP5_31_29,
+		GP_2_26_FN, FN_IP5_28_26,
+		GP_2_25_FN, FN_IP5_25_24,
+		GP_2_24_FN, FN_IP5_23_22,
+		GP_2_23_FN, FN_IP5_21_20,
+		GP_2_22_FN, FN_IP5_19_17,
+		GP_2_21_FN, FN_IP5_16_15,
+		GP_2_20_FN, FN_IP5_14_12,
+		GP_2_19_FN, FN_IP5_11_9,
+		GP_2_18_FN, FN_IP5_8_6,
+		GP_2_17_FN, FN_IP5_5_3,
+		GP_2_16_FN, FN_IP5_2_0,
+		GP_2_15_FN, FN_IP4_30_28,
+		GP_2_14_FN, FN_IP4_27_26,
+		GP_2_13_FN, FN_IP4_25_24,
+		GP_2_12_FN, FN_IP4_23_22,
+		GP_2_11_FN, FN_IP4_21,
+		GP_2_10_FN, FN_IP4_20,
+		GP_2_9_FN, FN_IP4_19,
+		GP_2_8_FN, FN_IP4_18_16,
+		GP_2_7_FN, FN_IP4_15_13,
+		GP_2_6_FN, FN_IP4_12_10,
+		GP_2_5_FN, FN_IP4_9_8,
+		GP_2_4_FN, FN_IP4_7_5,
+		GP_2_3_FN, FN_IP4_4_2,
+		GP_2_2_FN, FN_IP4_1_0,
+		GP_2_1_FN, FN_IP3_30_28,
+		GP_2_0_FN, FN_IP3_27_25 }
+	},
+	{ PINMUX_CFG_REG("GPSR3", 0xE6060010, 32, 1) {
+		GP_3_31_FN, FN_IP9_18_17,
+		GP_3_30_FN, FN_IP9_16,
+		GP_3_29_FN, FN_IP9_15_13,
+		GP_3_28_FN, FN_IP9_12,
+		GP_3_27_FN, FN_IP9_11,
+		GP_3_26_FN, FN_IP9_10_8,
+		GP_3_25_FN, FN_IP9_7,
+		GP_3_24_FN, FN_IP9_6,
+		GP_3_23_FN, FN_IP9_5_3,
+		GP_3_22_FN, FN_IP9_2_0,
+		GP_3_21_FN, FN_IP8_30_28,
+		GP_3_20_FN, FN_IP8_27_26,
+		GP_3_19_FN, FN_IP8_25_24,
+		GP_3_18_FN, FN_IP8_23_21,
+		GP_3_17_FN, FN_IP8_20_18,
+		GP_3_16_FN, FN_IP8_17_15,
+		GP_3_15_FN, FN_IP8_14_12,
+		GP_3_14_FN, FN_IP8_11_9,
+		GP_3_13_FN, FN_IP8_8_6,
+		GP_3_12_FN, FN_IP8_5_3,
+		GP_3_11_FN, FN_IP8_2_0,
+		GP_3_10_FN, FN_IP7_29_27,
+		GP_3_9_FN, FN_IP7_26_24,
+		GP_3_8_FN, FN_IP7_23_21,
+		GP_3_7_FN, FN_IP7_20_19,
+		GP_3_6_FN, FN_IP7_18_17,
+		GP_3_5_FN, FN_IP7_16_15,
+		GP_3_4_FN, FN_IP7_14_13,
+		GP_3_3_FN, FN_IP7_12_11,
+		GP_3_2_FN, FN_IP7_10_9,
+		GP_3_1_FN, FN_IP7_8_6,
+		GP_3_0_FN, FN_IP7_5_3 }
+	},
+	{ PINMUX_CFG_REG("GPSR4", 0xE6060014, 32, 1) {
+		GP_4_31_FN, FN_IP15_5_4,
+		GP_4_30_FN, FN_IP15_3_2,
+		GP_4_29_FN, FN_IP15_1_0,
+		GP_4_28_FN, FN_IP11_8_6,
+		GP_4_27_FN, FN_IP11_5_3,
+		GP_4_26_FN, FN_IP11_2_0,
+		GP_4_25_FN, FN_IP10_31_29,
+		GP_4_24_FN, FN_IP10_28_27,
+		GP_4_23_FN, FN_IP10_26_25,
+		GP_4_22_FN, FN_IP10_24_22,
+		GP_4_21_FN, FN_IP10_21_19,
+		GP_4_20_FN, FN_IP10_18_17,
+		GP_4_19_FN, FN_IP10_16_15,
+		GP_4_18_FN, FN_IP10_14_12,
+		GP_4_17_FN, FN_IP10_11_9,
+		GP_4_16_FN, FN_IP10_8_6,
+		GP_4_15_FN, FN_IP10_5_3,
+		GP_4_14_FN, FN_IP10_2_0,
+		GP_4_13_FN, FN_IP9_31_29,
+		GP_4_12_FN, FN_VI0_DATA0_VI0_B7,
+		GP_4_11_FN, FN_VI0_DATA0_VI0_B6,
+		GP_4_10_FN, FN_VI0_DATA0_VI0_B5,
+		GP_4_9_FN, FN_VI0_DATA0_VI0_B4,
+		GP_4_8_FN, FN_IP9_28_27,
+		GP_4_7_FN, FN_VI0_DATA0_VI0_B2,
+		GP_4_6_FN, FN_VI0_DATA0_VI0_B1,
+		GP_4_5_FN, FN_VI0_DATA0_VI0_B0,
+		GP_4_4_FN, FN_IP9_26_25,
+		GP_4_3_FN, FN_IP9_24_23,
+		GP_4_2_FN, FN_IP9_22_21,
+		GP_4_1_FN, FN_IP9_20_19,
+		GP_4_0_FN, FN_VI0_CLK }
+	},
+	{ PINMUX_CFG_REG("GPSR5", 0xE6060018, 32, 1) {
+		GP_5_31_FN, FN_IP3_24_22,
+		GP_5_30_FN, FN_IP13_9_7,
+		GP_5_29_FN, FN_IP13_6_5,
+		GP_5_28_FN, FN_IP13_4_3,
+		GP_5_27_FN, FN_IP13_2_0,
+		GP_5_26_FN, FN_IP12_29_27,
+		GP_5_25_FN, FN_IP12_26_24,
+		GP_5_24_FN, FN_IP12_23_22,
+		GP_5_23_FN, FN_IP12_21_20,
+		GP_5_22_FN, FN_IP12_19_18,
+		GP_5_21_FN, FN_IP12_17_16,
+		GP_5_20_FN, FN_IP12_15_13,
+		GP_5_19_FN, FN_IP12_12_10,
+		GP_5_18_FN, FN_IP12_9_7,
+		GP_5_17_FN, FN_IP12_6_4,
+		GP_5_16_FN, FN_IP12_3_2,
+		GP_5_15_FN, FN_IP12_1_0,
+		GP_5_14_FN, FN_IP11_31_30,
+		GP_5_13_FN, FN_IP11_29_28,
+		GP_5_12_FN, FN_IP11_27,
+		GP_5_11_FN, FN_IP11_26,
+		GP_5_10_FN, FN_IP11_25,
+		GP_5_9_FN, FN_IP11_24,
+		GP_5_8_FN, FN_IP11_23,
+		GP_5_7_FN, FN_IP11_22,
+		GP_5_6_FN, FN_IP11_21,
+		GP_5_5_FN, FN_IP11_20,
+		GP_5_4_FN, FN_IP11_19,
+		GP_5_3_FN, FN_IP11_18_17,
+		GP_5_2_FN, FN_IP11_16_15,
+		GP_5_1_FN, FN_IP11_14_12,
+		GP_5_0_FN, FN_IP11_11_9 }
+	},
+	{ PINMUX_CFG_REG("GPSR6", 0xE606001C, 32, 1) {
+		0, 0,
+		0, 0,
+		GP_6_29_FN, FN_IP14_31_29,
+		GP_6_28_FN, FN_IP14_28_26,
+		GP_6_27_FN, FN_IP14_25_23,
+		GP_6_26_FN, FN_IP14_22_20,
+		GP_6_25_FN, FN_IP14_19_17,
+		GP_6_24_FN, FN_IP14_16_14,
+		GP_6_23_FN, FN_IP14_13_11,
+		GP_6_22_FN, FN_IP14_10_8,
+		GP_6_21_FN, FN_IP14_7,
+		GP_6_20_FN, FN_IP14_6,
+		GP_6_19_FN, FN_IP14_5,
+		GP_6_18_FN, FN_IP14_4,
+		GP_6_17_FN, FN_IP14_3,
+		GP_6_16_FN, FN_IP14_2,
+		GP_6_15_FN, FN_IP14_1_0,
+		GP_6_14_FN, FN_IP13_30_28,
+		GP_6_13_FN, FN_IP13_27,
+		GP_6_12_FN, FN_IP13_26,
+		GP_6_11_FN, FN_IP13_25,
+		GP_6_10_FN, FN_IP13_24_23,
+		GP_6_9_FN, FN_IP13_22,
+		0, 0,
+		GP_6_7_FN, FN_IP13_21_19,
+		GP_6_6_FN, FN_IP13_18_16,
+		GP_6_5_FN, FN_IP13_15,
+		GP_6_4_FN, FN_IP13_14,
+		GP_6_3_FN, FN_IP13_13,
+		GP_6_2_FN, FN_IP13_12,
+		GP_6_1_FN, FN_IP13_11,
+		GP_6_0_FN, FN_IP13_10 }
+	},
+	{ PINMUX_CFG_REG("GPSR7", 0xE6060074, 32, 1) {
+		0, 0,
+		0, 0,
+		0, 0,
+		0, 0,
+		0, 0,
+		0, 0,
+		GP_7_25_FN, FN_USB1_PWEN,
+		GP_7_24_FN, FN_USB0_OVC,
+		GP_7_23_FN, FN_USB0_PWEN,
+		GP_7_22_FN, FN_IP15_14_12,
+		GP_7_21_FN, FN_IP15_11_9,
+		GP_7_20_FN, FN_IP15_8_6,
+		GP_7_19_FN, FN_IP7_2_0,
+		GP_7_18_FN, FN_IP6_29_27,
+		GP_7_17_FN, FN_IP6_26_24,
+		GP_7_16_FN, FN_IP6_23_21,
+		GP_7_15_FN, FN_IP6_20_19,
+		GP_7_14_FN, FN_IP6_18_16,
+		GP_7_13_FN, FN_IP6_15_14,
+		GP_7_12_FN, FN_IP6_13_12,
+		GP_7_11_FN, FN_IP6_11_10,
+		GP_7_10_FN, FN_IP6_9_8,
+		GP_7_9_FN, FN_IP16_11_10,
+		GP_7_8_FN, FN_IP16_9_8,
+		GP_7_7_FN, FN_IP16_7_6,
+		GP_7_6_FN, FN_IP16_5_3,
+		GP_7_5_FN, FN_IP16_2_0,
+		GP_7_4_FN, FN_IP15_29_27,
+		GP_7_3_FN, FN_IP15_26_24,
+		GP_7_2_FN, FN_IP15_23_21,
+		GP_7_1_FN, FN_IP15_20_18,
+		GP_7_0_FN, FN_IP15_17_15 }
+	},
+	/* IPSR0 - IPSR10 */
+	{ PINMUX_CFG_REG_VAR("IPSR11", 0xE606004C, 32,
+			     2, 2, 1, 1, 1, 1, 1, 1, 1, 1, 1, 2, 2,
+			     3, 3, 3, 3, 3) {
+		/* IP11_31_30 [2] */
+		FN_ETH_CRS_DV, FN_AVB_LINK, FN_SDA2_C, 0,
+		/* IP11_29_28 [2] */
+		FN_ETH_MDIO, FN_AVB_RX_CLK, FN_SCL2_C, 0,
+		/* IP11_27 [1] */
+		FN_VI1_DATA7, FN_AVB_MDC,
+		/* IP11_26 [1] */
+		FN_VI1_DATA6, FN_AVB_MAGIC,
+		/* IP11_25 [1] */
+		FN_VI1_DATA5, FN_AVB_RX_DV,
+		/* IP11_24 [1] */
+		FN_VI1_DATA4, FN_AVB_MDIO,
+		/* IP11_23 [1] */
+		FN_VI1_DATA3, FN_AVB_RX_ER,
+		/* IP11_22 [1] */
+		FN_VI1_DATA2, FN_AVB_RXD7,
+		/* IP11_21 [1] */
+		FN_VI1_DATA1, FN_AVB_RXD6,
+		/* IP11_20 [1] */
+		FN_VI1_DATA0, FN_AVB_RXD5,
+		/* IP11_19 [1] */
+		FN_VI1_CLK, FN_AVB_RXD4,
+		/* IP11_18_17 [2] */
+		FN_VI1_FIELD, FN_AVB_RXD3, FN_TS_SPSYNC0_B, 0,
+		/* IP11_16_15 [2] */
+		FN_VI1_CLKENB, FN_AVB_RXD2, FN_TS_SDEN0_B, 0,
+		/* IP11_14_12 [3] */
+		FN_VI1_VSYNC_N, FN_AVB_RXD1, FN_TS_SCK0_B,
+		FN_RX4_B, FN_SCIFA4_RXD_B,
+		0, 0, 0,
+		/* IP11_11_9 [3] */
+		FN_VI1_HSYNC_N, FN_AVB_RXD0, FN_TS_SDATA0_B,
+		FN_TX4_B, FN_SCIFA4_TXD_B,
+		0, 0, 0,
+		/* IP11_8_6 [3] */
+		FN_VI0_R7, FN_GLO_RFON_B, FN_RX1_C, FN_CAN0_RX_E,
+		FN_SDA4_B, FN_HRX1_D, FN_SCIFB0_RXD_D, 0,
+		/* IP11_5_3 [3] */
+		FN_VI0_R6, FN_VI2_DATA7, FN_GLO_SS_B, FN_TX1_C, FN_SCL4_B,
+		0, 0, 0,
+		/* IP11_2_0 [3] */
+		FN_VI0_R5, FN_VI2_DATA6, FN_GLO_SDATA_B, FN_RX0_C, FN_SDA1_D,
+		0, 0, 0, }
+	},
+	{ PINMUX_CFG_REG_VAR("IPSR12", 0xE6060050, 32,
+			     2, 3, 3, 2, 2, 2, 2, 3, 3, 3, 3, 2, 2) {
+		/* IP12_31_30 [2] */
+		0, 0, 0, 0,
+		/* IP12_29_27 [3] */
+		FN_STP_ISCLK_0, FN_AVB_TX_EN, FN_SCIFB2_RXD_D,
+		FN_ADICS_SAMP_B, FN_MSIOF0_SCK_C,
+		0, 0, 0,
+		/* IP12_26_24 [3] */
+		FN_STP_IVCXO27_0, FN_AVB_TXD7, FN_SCIFB2_TXD_D,
+		FN_ADIDATA_B, FN_MSIOF0_SYNC_C,
+		0, 0, 0,
+		/* IP12_23_22 [2] */
+		FN_ETH_MDC, FN_AVB_TXD6, FN_IERX_C, 0,
+		/* IP12_21_20 [2] */
+		FN_ETH_TXD0, FN_AVB_TXD5, FN_IECLK_C, 0,
+		/* IP12_19_18 [2] */
+		FN_ETH_MAGIC, FN_AVB_TXD4, FN_IETX_C, 0,
+		/* IP12_17_16 [2] */
+		FN_ETH_TX_EN, FN_AVB_TXD3, FN_TCLK1_B, FN_CAN_CLK_B,
+		/* IP12_15_13 [3] */
+		FN_ETH_TXD1, FN_AVB_TXD2, FN_SCIFA3_TXD_B,
+		FN_CAN1_TX_C, FN_MSIOF1_TXD_E,
+		0, 0, 0,
+		/* IP12_12_10 [3] */
+		FN_ETH_REFCLK, FN_AVB_TXD1, FN_SCIFA3_RXD_B,
+		FN_CAN1_RX_C, FN_MSIOF1_SYNC_E,
+		0, 0, 0,
+		/* IP12_9_7 [3] */
+		FN_ETH_LINK, FN_AVB_TXD0, FN_CAN0_RX_C,
+		FN_SDA2_D, FN_MSIOF1_SCK_E,
+		0, 0, 0,
+		/* IP12_6_4 [3] */
+		FN_ETH_RXD1, FN_AVB_GTXREFCLK, FN_CAN0_TX_C,
+		FN_SCL2_D, FN_MSIOF1_RXD_E,
+		0, 0, 0,
+		/* IP12_3_2 [2] */
+		FN_ETH_RXD0, FN_AVB_PHY_INT, FN_SDA3, FN_SDA7,
+		/* IP12_1_0 [2] */
+		FN_ETH_RX_ER, FN_AVB_CRS, FN_SCL3, FN_SCL7, }
+	},
+
+	/* IPSR13 - IPSR16 */
+
+	{ PINMUX_CFG_REG_VAR("MOD_SEL", 0xE6060090, 32,
+			     1, 2, 2, 2, 3, 2, 1, 1, 1, 1,
+			     3, 2, 2, 2, 1, 2, 2, 2) {
+		/* RESEVED [1] */
+		0, 0,
+		/* SEL_SCIF1 [2] */
+		FN_SEL_SCIF1_0, FN_SEL_SCIF1_1, FN_SEL_SCIF1_2, FN_SEL_SCIF1_3,
+		/* SEL_SCIFB [2] */
+		FN_SEL_SCIFB_0, FN_SEL_SCIFB_1, FN_SEL_SCIFB_2, FN_SEL_SCIFB_3,
+		/* SEL_SCIFB2 [2] */
+		FN_SEL_SCIFB2_0, FN_SEL_SCIFB2_1,
+		FN_SEL_SCIFB2_2, FN_SEL_SCIFB2_3,
+		/* SEL_SCIFB1 [3] */
+		FN_SEL_SCIFB1_0, FN_SEL_SCIFB1_1,
+		FN_SEL_SCIFB1_2, FN_SEL_SCIFB1_3,
+		0, 0, 0, 0,
+		/* SEL_SCIFA1 [2] */
+		FN_SEL_SCIFA1_0, FN_SEL_SCIFA1_1, FN_SEL_SCIFA1_2, 0,
+		/* SEL_SSI9 [1] */
+		FN_SEL_SSI9_0, FN_SEL_SSI9_1,
+		/* SEL_SCFA [1] */
+		FN_SEL_SCFA_0, FN_SEL_SCFA_1,
+		/* SEL_QSP [1] */
+		FN_SEL_QSP_0, FN_SEL_QSP_1,
+		/* SEL_SSI7 [1] */
+		FN_SEL_SSI7_0, FN_SEL_SSI7_1,
+		/* SEL_HSCIF1 [3] */
+		FN_SEL_HSCIF1_0, FN_SEL_HSCIF1_1, FN_SEL_HSCIF1_2,
+		FN_SEL_HSCIF1_3, FN_SEL_HSCIF1_4,
+		0, 0, 0,
+		/* RESEVED [2] */
+		0, 0, 0, 0,
+		/* SEL_VI1 [2] */
+		FN_SEL_VI1_0, FN_SEL_VI1_1, FN_SEL_VI1_2, 0,
+		/* RESEVED [2] */
+		0, 0, 0, 0,
+		/* SEL_TMU [1] */
+		FN_SEL_TMU1_0, FN_SEL_TMU1_1,
+		/* SEL_LBS [2] */
+		FN_SEL_LBS_0, FN_SEL_LBS_1, FN_SEL_LBS_2, FN_SEL_LBS_3,
+		/* SEL_TSIF0 [2] */
+		FN_SEL_TSIF0_0, FN_SEL_TSIF0_1, FN_SEL_TSIF0_2, FN_SEL_TSIF0_3,
+		/* SEL_SOF0 [2] */
+		FN_SEL_SOF0_0, FN_SEL_SOF0_1, FN_SEL_SOF0_2, 0, }
+	},
+	{ PINMUX_CFG_REG_VAR("MOD_SEL2", 0xE6060094, 32,
+			     3, 1, 1, 3, 2, 1, 1, 2, 2,
+			     1, 3, 2, 1, 2, 2, 2, 1, 1, 1) {
+		/* SEL_SCIF0 [3] */
+		FN_SEL_SCIF0_0, FN_SEL_SCIF0_1, FN_SEL_SCIF0_2,
+		FN_SEL_SCIF0_3, FN_SEL_SCIF0_4,
+		0, 0, 0,
+		/* RESEVED [1] */
+		0, 0,
+		/* SEL_SCIF [1] */
+		FN_SEL_SCIF_0, FN_SEL_SCIF_1,
+		/* SEL_CAN0 [3] */
+		FN_SEL_CAN0_0, FN_SEL_CAN0_1, FN_SEL_CAN0_2, FN_SEL_CAN0_3,
+		FN_SEL_CAN0_4, FN_SEL_CAN0_5,
+		0, 0,
+		/* SEL_CAN1 [2] */
+		FN_SEL_CAN1_0, FN_SEL_CAN1_1, FN_SEL_CAN1_2, FN_SEL_CAN1_3,
+		/* RESEVED [1] */
+		0, 0,
+		/* SEL_SCIFA2 [1] */
+		FN_SEL_SCIFA2_0, FN_SEL_SCIFA2_1,
+		/* SEL_SCIF4 [2] */
+		FN_SEL_SCIF4_0, FN_SEL_SCIF4_1, FN_SEL_SCIF4_2, 0,
+		/* RESEVED [2] */
+		0, 0, 0, 0,
+		/* SEL_ADG [1] */
+		FN_SEL_ADG_0, FN_SEL_ADG_1,
+		/* SEL_FM [3] */
+		FN_SEL_FM_0, FN_SEL_FM_1, FN_SEL_FM_2,
+		FN_SEL_FM_3, FN_SEL_FM_4,
+		0, 0, 0,
+		/* SEL_SCIFA5 [2] */
+		FN_SEL_SCIFA5_0, FN_SEL_SCIFA5_1, FN_SEL_SCIFA5_2, 0,
+		/* RESEVED [1] */
+		0, 0,
+		/* SEL_GPS [2] */
+		FN_SEL_GPS_0, FN_SEL_GPS_1, FN_SEL_GPS_2, FN_SEL_GPS_3,
+		/* SEL_SCIFA4 [2] */
+		FN_SEL_SCIFA4_0, FN_SEL_SCIFA4_1, FN_SEL_SCIFA4_2, 0,
+		/* SEL_SCIFA3 [2] */
+		FN_SEL_SCIFA3_0, FN_SEL_SCIFA3_1, FN_SEL_SCIFA3_2, 0,
+		/* SEL_SIM [1] */
+		FN_SEL_SIM_0, FN_SEL_SIM_1,
+		/* RESEVED [1] */
+		0, 0,
+		/* SEL_SSI8 [1] */
+		FN_SEL_SSI8_0, FN_SEL_SSI8_1, }
+	},
+	{ PINMUX_CFG_REG_VAR("MOD_SEL3", 0xE6060098, 32,
+			     2, 2, 2, 2, 2, 2, 2, 2,
+			     1, 1, 2, 2, 3, 2, 2, 2, 1) {
+		/* SEL_HSCIF2 [2] */
+		FN_SEL_HSCIF2_0, FN_SEL_HSCIF2_1,
+		FN_SEL_HSCIF2_2, FN_SEL_HSCIF2_3,
+		/* SEL_CANCLK [2] */
+		FN_SEL_CANCLK_0, FN_SEL_CANCLK_1,
+		FN_SEL_CANCLK_2, FN_SEL_CANCLK_3,
+		/* SEL_IIC8 [2] */
+		FN_SEL_IIC8_0, FN_SEL_IIC8_1, FN_SEL_IIC8_2, 0,
+		/* SEL_IIC7 [2] */
+		FN_SEL_IIC7_0, FN_SEL_IIC7_1, FN_SEL_IIC7_2, 0,
+		/* SEL_IIC4 [2] */
+		FN_SEL_IIC4_0, FN_SEL_IIC4_1, FN_SEL_IIC4_2, 0,
+		/* SEL_IIC3 [2] */
+		FN_SEL_IIC3_0, FN_SEL_IIC3_1, FN_SEL_IIC3_2, FN_SEL_IIC3_3,
+		/* SEL_SCIF3 [2] */
+		FN_SEL_SCIF3_0, FN_SEL_SCIF3_1, FN_SEL_SCIF3_2, FN_SEL_SCIF3_3,
+		/* SEL_IEB [2] */
+		FN_SEL_IEB_0, FN_SEL_IEB_1, FN_SEL_IEB_2,
+		/* SEL_MMC [1] */
+		FN_SEL_MMC_0, FN_SEL_MMC_1,
+		/* SEL_SCIF5 [1] */
+		FN_SEL_SCIF5_0, FN_SEL_SCIF5_1,
+		/* RESEVED [2] */
+		0, 0, 0, 0,
+		/* SEL_IIC2 [2] */
+		FN_SEL_IIC2_0, FN_SEL_IIC2_1, FN_SEL_IIC2_2, FN_SEL_IIC2_3,
+		/* SEL_IIC1 [3] */
+		FN_SEL_IIC1_0, FN_SEL_IIC1_1, FN_SEL_IIC1_2, FN_SEL_IIC1_3,
+		FN_SEL_IIC1_4,
+		0, 0, 0,
+		/* SEL_IIC0 [2] */
+		FN_SEL_IIC0_0, FN_SEL_IIC0_1, FN_SEL_IIC0_2, 0,
+		/* RESEVED [2] */
+		0, 0, 0, 0,
+		/* RESEVED [2] */
+		0, 0, 0, 0,
+		/* RESEVED [1] */
+		0, 0, }
+	},
+	{ PINMUX_CFG_REG_VAR("MOD_SEL4", 0xE606009C, 32,
+			     3, 2, 2, 1, 1, 1, 1, 3, 2,
+			     2, 3, 1, 1, 1, 2, 2, 2, 2) {
+		/* SEL_SOF1 [3] */
+		FN_SEL_SOF1_0, FN_SEL_SOF1_1, FN_SEL_SOF1_2, FN_SEL_SOF1_3,
+		FN_SEL_SOF1_4,
+		0, 0, 0,
+		/* SEL_HSCIF0 [2] */
+		FN_SEL_HSCIF0_0, FN_SEL_HSCIF0_1, FN_SEL_HSCIF0_2, 0,
+		/* SEL_DIS [2] */
+		FN_SEL_DIS_0, FN_SEL_DIS_1, FN_SEL_DIS_2, 0,
+		/* RESEVED [1] */
+		0, 0,
+		/* SEL_RAD [1] */
+		FN_SEL_RAD_0, FN_SEL_RAD_1,
+		/* SEL_RCN [1] */
+		FN_SEL_RCN_0, FN_SEL_RCN_1,
+		/* SEL_RSP [1] */
+		FN_SEL_RSP_0, FN_SEL_RSP_1,
+		/* SEL_SCIF2 [3] */
+		FN_SEL_SCIF2_0, FN_SEL_SCIF2_1, FN_SEL_SCIF2_2,
+		FN_SEL_SCIF2_3, FN_SEL_SCIF2_4,
+		0, 0, 0,
+		/* RESEVED [2] */
+		0, 0, 0, 0,
+		/* RESEVED [2] */
+		0, 0, 0, 0,
+		/* SEL_SOF2 [3] */
+		FN_SEL_SOF2_0, FN_SEL_SOF2_1, FN_SEL_SOF2_2,
+		FN_SEL_SOF2_3, FN_SEL_SOF2_4,
+		0, 0, 0,
+		/* RESEVED [1] */
+		0, 0,
+		/* SEL_SSI1 [1] */
+		FN_SEL_SSI1_0, FN_SEL_SSI1_1,
+		/* SEL_SSI0 [1] */
+		FN_SEL_SSI0_0, FN_SEL_SSI0_1,
+		/* SEL_SSP [2] */
+		FN_SEL_SSP_0, FN_SEL_SSP_1, FN_SEL_SSP_2, 0,
+		/* RESEVED [2] */
+		0, 0, 0, 0,
+		/* RESEVED [2] */
+		0, 0, 0, 0,
+		/* RESEVED [2] */
+		0, 0, 0, 0, }
+	},
+	{ PINMUX_CFG_REG("INOUTSEL0", 0xE6050004, 32, 1) { GP_INOUTSEL(0) } },
+	{ PINMUX_CFG_REG("INOUTSEL1", 0xE6051004, 32, 1) {
+		0, 0,
+		0, 0,
+		0, 0,
+		0, 0,
+		0, 0,
+		0, 0,
+		GP_1_25_IN, GP_1_25_OUT,
+		GP_1_24_IN, GP_1_24_OUT,
+		GP_1_23_IN, GP_1_23_OUT,
+		GP_1_22_IN, GP_1_22_OUT,
+		GP_1_21_IN, GP_1_21_OUT,
+		GP_1_20_IN, GP_1_20_OUT,
+		GP_1_19_IN, GP_1_19_OUT,
+		GP_1_18_IN, GP_1_18_OUT,
+		GP_1_17_IN, GP_1_17_OUT,
+		GP_1_16_IN, GP_1_16_OUT,
+		GP_1_15_IN, GP_1_15_OUT,
+		GP_1_14_IN, GP_1_14_OUT,
+		GP_1_13_IN, GP_1_13_OUT,
+		GP_1_12_IN, GP_1_12_OUT,
+		GP_1_11_IN, GP_1_11_OUT,
+		GP_1_10_IN, GP_1_10_OUT,
+		GP_1_9_IN, GP_1_9_OUT,
+		GP_1_8_IN, GP_1_8_OUT,
+		GP_1_7_IN, GP_1_7_OUT,
+		GP_1_6_IN, GP_1_6_OUT,
+		GP_1_5_IN, GP_1_5_OUT,
+		GP_1_4_IN, GP_1_4_OUT,
+		GP_1_3_IN, GP_1_3_OUT,
+		GP_1_2_IN, GP_1_2_OUT,
+		GP_1_1_IN, GP_1_1_OUT,
+		GP_1_0_IN, GP_1_0_OUT, }
+	},
+	{ PINMUX_CFG_REG("INOUTSEL2", 0xE6052004, 32, 1) { GP_INOUTSEL(2) } },
+	{ PINMUX_CFG_REG("INOUTSEL3", 0xE6053004, 32, 1) { GP_INOUTSEL(3) } },
+	{ PINMUX_CFG_REG("INOUTSEL4", 0xE6054004, 32, 1) { GP_INOUTSEL(4) } },
+	{ PINMUX_CFG_REG("INOUTSEL5", 0xE6055004, 32, 1) { GP_INOUTSEL(5) } },
+	{ PINMUX_CFG_REG("INOUTSEL6", 0xE6055404, 32, 1) { GP_INOUTSEL(6) } },
+	{ PINMUX_CFG_REG("INOUTSEL7", 0xE6055804, 32, 1) {
+		0, 0,
+		0, 0,
+		0, 0,
+		0, 0,
+		0, 0,
+		0, 0,
+		GP_7_25_IN, GP_7_25_OUT,
+		GP_7_24_IN, GP_7_24_OUT,
+		GP_7_23_IN, GP_7_23_OUT,
+		GP_7_22_IN, GP_7_22_OUT,
+		GP_7_21_IN, GP_7_21_OUT,
+		GP_7_20_IN, GP_7_20_OUT,
+		GP_7_19_IN, GP_7_19_OUT,
+		GP_7_18_IN, GP_7_18_OUT,
+		GP_7_17_IN, GP_7_17_OUT,
+		GP_7_16_IN, GP_7_16_OUT,
+		GP_7_15_IN, GP_7_15_OUT,
+		GP_7_14_IN, GP_7_14_OUT,
+		GP_7_13_IN, GP_7_13_OUT,
+		GP_7_12_IN, GP_7_12_OUT,
+		GP_7_11_IN, GP_7_11_OUT,
+		GP_7_10_IN, GP_7_10_OUT,
+		GP_7_9_IN, GP_7_9_OUT,
+		GP_7_8_IN, GP_7_8_OUT,
+		GP_7_7_IN, GP_7_7_OUT,
+		GP_7_6_IN, GP_7_6_OUT,
+		GP_7_5_IN, GP_7_5_OUT,
+		GP_7_4_IN, GP_7_4_OUT,
+		GP_7_3_IN, GP_7_3_OUT,
+		GP_7_2_IN, GP_7_2_OUT,
+		GP_7_1_IN, GP_7_1_OUT,
+		GP_7_0_IN, GP_7_0_OUT, }
+	},
+	{ },
+};
+
+static struct pinmux_data_reg pinmux_data_regs[] = {
+	{ PINMUX_DATA_REG("INDT0", 0xE6050008, 32) { GP_INDT(0) } },
+	{ PINMUX_DATA_REG("INDT1", 0xE6051008, 32) {
+		0, 0, 0, 0,
+		0, 0, GP_1_25_DATA, GP_1_24_DATA,
+		GP_1_23_DATA, GP_1_22_DATA, GP_1_21_DATA, GP_1_20_DATA,
+		GP_1_19_DATA, GP_1_18_DATA, GP_1_17_DATA, GP_1_16_DATA,
+		GP_1_15_DATA, GP_1_14_DATA, GP_1_13_DATA, GP_1_12_DATA,
+		GP_1_11_DATA, GP_1_10_DATA, GP_1_9_DATA, GP_1_8_DATA,
+		GP_1_7_DATA, GP_1_6_DATA, GP_1_5_DATA, GP_1_4_DATA,
+		GP_1_3_DATA, GP_1_2_DATA, GP_1_1_DATA, GP_1_0_DATA }
+	},
+	{ PINMUX_DATA_REG("INDT2", 0xE6052008, 32) { GP_INDT(2) } },
+	{ PINMUX_DATA_REG("INDT3", 0xE6053008, 32) { GP_INDT(3) } },
+	{ PINMUX_DATA_REG("INDT4", 0xE6054008, 32) { GP_INDT(4) } },
+	{ PINMUX_DATA_REG("INDT5", 0xE6055008, 32) { GP_INDT(5) } },
+	{ PINMUX_DATA_REG("INDT6", 0xE6055408, 32) { GP_INDT(6) } },
+	{ PINMUX_DATA_REG("INDT7", 0xE6055808, 32) {
+		0, 0, 0, 0,
+		0, 0, GP_7_25_DATA, GP_7_24_DATA,
+		GP_7_23_DATA, GP_7_22_DATA, GP_7_21_DATA, GP_7_20_DATA,
+		GP_7_19_DATA, GP_7_18_DATA, GP_7_17_DATA, GP_7_16_DATA,
+		GP_7_15_DATA, GP_7_14_DATA, GP_7_13_DATA, GP_7_12_DATA,
+		GP_7_11_DATA, GP_7_10_DATA, GP_7_9_DATA, GP_7_8_DATA,
+		GP_7_7_DATA, GP_7_6_DATA, GP_7_5_DATA, GP_7_4_DATA,
+		GP_7_3_DATA, GP_7_2_DATA, GP_7_1_DATA, GP_7_0_DATA }
+	},
+	{ },
+};
+
+static struct pinmux_info r8a7791_pinmux_info = {
+	.name = "r8a7791_pfc",
+
+	.unlock_reg = 0xe6060000, /* PMMR */
+
+	.reserved_id = PINMUX_RESERVED,
+	.data = { PINMUX_DATA_BEGIN, PINMUX_DATA_END },
+	.input = { PINMUX_INPUT_BEGIN, PINMUX_INPUT_END },
+	.output = { PINMUX_OUTPUT_BEGIN, PINMUX_OUTPUT_END },
+	.mark = { PINMUX_MARK_BEGIN, PINMUX_MARK_END },
+	.function = { PINMUX_FUNCTION_BEGIN, PINMUX_FUNCTION_END },
+
+	.first_gpio = GPIO_GP_0_0,
+	.last_gpio = GPIO_FN_MSIOF0_SCK_C /* GPIO_FN_CAN1_RX_B */,
+
+	.gpios = pinmux_gpios,
+	.cfg_regs = pinmux_config_regs,
+	.data_regs = pinmux_data_regs,
+
+	.gpio_data = pinmux_data,
+	.gpio_data_size = ARRAY_SIZE(pinmux_data),
+};
+
+void r8a7791_pinmux_init(void)
+{
+	register_pinmux(&r8a7791_pinmux_info);
+}
diff --git a/arch/arm/cpu/armv7/rmobile/timer.c b/arch/arm/cpu/armv7/rmobile/timer.c
index 72e0c12545..04700e7d34 100644
--- a/arch/arm/cpu/armv7/rmobile/timer.c
+++ b/arch/arm/cpu/armv7/rmobile/timer.c
@@ -6,6 +6,7 @@
  */
 
 #include <common.h>
+#include <div64.h>
 #include <asm/io.h>
 #include <asm/arch-armv7/globaltimer.h>
 #include <asm/arch/rmobile.h>
@@ -38,13 +39,16 @@ static u64 get_time_us(void)
 	u64 timer = get_cpu_global_timer();
 
 	timer = ((timer << 2) + (CLK2MHZ(CONFIG_SYS_CPU_CLK) >> 1));
-	timer /= (u64)CLK2MHZ(CONFIG_SYS_CPU_CLK);
+	do_div(timer, CLK2MHZ(CONFIG_SYS_CPU_CLK));
 	return timer;
 }
 
 static ulong get_time_ms(void)
 {
-	return (ulong)(get_time_us() / 1000);
+	u64 us = get_time_us();
+
+	do_div(us, 1000);
+	return us;
 }
 
 int timer_init(void)
diff --git a/arch/arm/cpu/armv7/socfpga/Makefile b/arch/arm/cpu/armv7/socfpga/Makefile
index dac2bbdac1..3e84a0c9f9 100644
--- a/arch/arm/cpu/armv7/socfpga/Makefile
+++ b/arch/arm/cpu/armv7/socfpga/Makefile
@@ -9,4 +9,4 @@
 
 obj-y	:= lowlevel_init.o
 obj-y	+= misc.o timer.o reset_manager.o system_manager.o
-obj-$(CONFIG_SPL_BUILD) += spl.o
+obj-$(CONFIG_SPL_BUILD) += spl.o freeze_controller.o
diff --git a/arch/arm/cpu/armv7/socfpga/freeze_controller.c b/arch/arm/cpu/armv7/socfpga/freeze_controller.c
new file mode 100644
index 0000000000..b8c9bce1e0
--- /dev/null
+++ b/arch/arm/cpu/armv7/socfpga/freeze_controller.c
@@ -0,0 +1,215 @@
+/*
+ *  Copyright (C) 2013 Altera Corporation <www.altera.com>
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+
+#include <common.h>
+#include <asm/io.h>
+#include <asm/arch/freeze_controller.h>
+#include <asm/arch/timer.h>
+#include <asm/errno.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+static const struct socfpga_freeze_controller *freeze_controller_base =
+		(void *)(SOCFPGA_SYSMGR_ADDRESS + SYSMGR_FRZCTRL_ADDRESS);
+
+/*
+ * Default state from cold reset is FREEZE_ALL; the global
+ * flag is set to TRUE to indicate the IO banks are frozen
+ */
+static uint32_t frzctrl_channel_freeze[FREEZE_CHANNEL_NUM]
+	= { FREEZE_CTRL_FROZEN, FREEZE_CTRL_FROZEN,
+	FREEZE_CTRL_FROZEN, FREEZE_CTRL_FROZEN};
+
+/* Freeze HPS IOs */
+void sys_mgr_frzctrl_freeze_req(void)
+{
+	u32 ioctrl_reg_offset;
+	u32 reg_value;
+	u32 reg_cfg_mask;
+	u32 channel_id;
+
+	/* select software FSM */
+	writel(SYSMGR_FRZCTRL_SRC_VIO1_ENUM_SW,	&freeze_controller_base->src);
+
+	/* Freeze channel 0 to 2 */
+	for (channel_id = 0; channel_id <= 2; channel_id++) {
+		ioctrl_reg_offset = (u32)(
+			&freeze_controller_base->vioctrl +
+			(channel_id << SYSMGR_FRZCTRL_VIOCTRL_SHIFT));
+
+		/*
+		 * Assert active low enrnsl, plniotri
+		 * and niotri signals
+		 */
+		reg_cfg_mask =
+			SYSMGR_FRZCTRL_VIOCTRL_SLEW_MASK
+			| SYSMGR_FRZCTRL_VIOCTRL_WKPULLUP_MASK
+			| SYSMGR_FRZCTRL_VIOCTRL_TRISTATE_MASK;
+		clrbits_le32(ioctrl_reg_offset,	reg_cfg_mask);
+
+		/*
+		 * Note: Delay for 20ns at min
+		 * Assert active low bhniotri signal and de-assert
+		 * active high csrdone
+		 */
+		reg_cfg_mask
+			= SYSMGR_FRZCTRL_VIOCTRL_BUSHOLD_MASK
+			| SYSMGR_FRZCTRL_VIOCTRL_CFG_MASK;
+		clrbits_le32(ioctrl_reg_offset,	reg_cfg_mask);
+
+		/* Set global flag to indicate channel is frozen */
+		frzctrl_channel_freeze[channel_id] = FREEZE_CTRL_FROZEN;
+	}
+
+	/* Freeze channel 3 */
+	/*
+	 * Assert active low enrnsl, plniotri and
+	 * niotri signals
+	 */
+	reg_cfg_mask
+		= SYSMGR_FRZCTRL_HIOCTRL_SLEW_MASK
+		| SYSMGR_FRZCTRL_HIOCTRL_WKPULLUP_MASK
+		| SYSMGR_FRZCTRL_HIOCTRL_TRISTATE_MASK;
+	clrbits_le32(&freeze_controller_base->hioctrl, reg_cfg_mask);
+
+	/*
+	 * assert active low bhniotri & nfrzdrv signals,
+	 * de-assert active high csrdone and assert
+	 * active high frzreg and nfrzdrv signals
+	 */
+	reg_value = readl(&freeze_controller_base->hioctrl);
+	reg_cfg_mask
+		= SYSMGR_FRZCTRL_HIOCTRL_BUSHOLD_MASK
+		| SYSMGR_FRZCTRL_HIOCTRL_CFG_MASK;
+	reg_value
+		= (reg_value & ~reg_cfg_mask)
+		| SYSMGR_FRZCTRL_HIOCTRL_REGRST_MASK
+		| SYSMGR_FRZCTRL_HIOCTRL_OCTRST_MASK;
+	writel(reg_value, &freeze_controller_base->hioctrl);
+
+	/*
+	 * assert active high reinit signal and de-assert
+	 * active high pllbiasen signals
+	 */
+	reg_value = readl(&freeze_controller_base->hioctrl);
+	reg_value
+		= (reg_value &
+		~SYSMGR_FRZCTRL_HIOCTRL_OCT_CFGEN_CALSTART_MASK)
+		| SYSMGR_FRZCTRL_HIOCTRL_DLLRST_MASK;
+	writel(reg_value, &freeze_controller_base->hioctrl);
+
+	/* Set global flag to indicate channel is frozen */
+	frzctrl_channel_freeze[channel_id] = FREEZE_CTRL_FROZEN;
+}
+
+/* Unfreeze/Thaw HPS IOs */
+void sys_mgr_frzctrl_thaw_req(void)
+{
+	u32 ioctrl_reg_offset;
+	u32 reg_cfg_mask;
+	u32 reg_value;
+	u32 channel_id;
+
+	/* select software FSM */
+	writel(SYSMGR_FRZCTRL_SRC_VIO1_ENUM_SW,	&freeze_controller_base->src);
+
+	/* Thaw channel 0 to 2 */
+	for (channel_id = 0; channel_id <= 2; channel_id++) {
+		ioctrl_reg_offset
+			= (u32)(&freeze_controller_base->vioctrl
+				+ (channel_id << SYSMGR_FRZCTRL_VIOCTRL_SHIFT));
+
+		/*
+		 * Assert active low bhniotri signal and
+		 * de-assert active high csrdone
+		 */
+		reg_cfg_mask
+			= SYSMGR_FRZCTRL_VIOCTRL_BUSHOLD_MASK
+			| SYSMGR_FRZCTRL_VIOCTRL_CFG_MASK;
+		setbits_le32(ioctrl_reg_offset,	reg_cfg_mask);
+
+		/*
+		 * Note: Delay for 20ns at min
+		 * de-assert active low plniotri and niotri signals
+		 */
+		reg_cfg_mask
+			= SYSMGR_FRZCTRL_VIOCTRL_WKPULLUP_MASK
+			| SYSMGR_FRZCTRL_VIOCTRL_TRISTATE_MASK;
+		setbits_le32(ioctrl_reg_offset,	reg_cfg_mask);
+
+		/*
+		 * Note: Delay for 20ns at min
+		 * de-assert active low enrnsl signal
+		 */
+		setbits_le32(ioctrl_reg_offset,
+			SYSMGR_FRZCTRL_VIOCTRL_SLEW_MASK);
+
+		/* Set global flag to indicate channel is thawed */
+		frzctrl_channel_freeze[channel_id] = FREEZE_CTRL_THAWED;
+	}
+
+	/* Thaw channel 3 */
+	/* de-assert active high reinit signal */
+	clrbits_le32(&freeze_controller_base->hioctrl,
+		SYSMGR_FRZCTRL_HIOCTRL_DLLRST_MASK);
+
+	/*
+	 * Note: Delay for 40ns at min
+	 * assert active high pllbiasen signals
+	 */
+	setbits_le32(&freeze_controller_base->hioctrl,
+		SYSMGR_FRZCTRL_HIOCTRL_OCT_CFGEN_CALSTART_MASK);
+
+	/*
+	 * Delay 1000 intosc. intosc is based on eosc1
+	 * Use worst case which is fatest eosc1=50MHz, delay required
+	 * is 1/50MHz * 1000 = 20us
+	 */
+	udelay(20);
+
+	/*
+	 * de-assert active low bhniotri signals,
+	 * assert active high csrdone and nfrzdrv signal
+	 */
+	reg_value = readl(&freeze_controller_base->hioctrl);
+	reg_value = (reg_value
+		| SYSMGR_FRZCTRL_HIOCTRL_BUSHOLD_MASK
+		| SYSMGR_FRZCTRL_HIOCTRL_CFG_MASK)
+		& ~SYSMGR_FRZCTRL_HIOCTRL_OCTRST_MASK;
+	writel(reg_value, &freeze_controller_base->hioctrl);
+
+	/*
+	 * Delay 33 intosc
+	 * Use worst case which is fatest eosc1=50MHz, delay required
+	 * is 1/50MHz * 33 = 660ns ~= 1us
+	 */
+	udelay(1);
+
+	/* de-assert active low plniotri and niotri signals */
+	reg_cfg_mask
+		= SYSMGR_FRZCTRL_HIOCTRL_WKPULLUP_MASK
+		| SYSMGR_FRZCTRL_HIOCTRL_TRISTATE_MASK;
+
+	setbits_le32(&freeze_controller_base->hioctrl, reg_cfg_mask);
+
+	/*
+	 * Note: Delay for 40ns at min
+	 * de-assert active high frzreg signal
+	 */
+	clrbits_le32(&freeze_controller_base->hioctrl,
+		SYSMGR_FRZCTRL_HIOCTRL_REGRST_MASK);
+
+	/*
+	 * Note: Delay for 40ns at min
+	 * de-assert active low enrnsl signal
+	 */
+	setbits_le32(&freeze_controller_base->hioctrl,
+		SYSMGR_FRZCTRL_HIOCTRL_SLEW_MASK);
+
+	/* Set global flag to indicate channel is thawed */
+	frzctrl_channel_freeze[channel_id] = FREEZE_CTRL_THAWED;
+}
diff --git a/arch/arm/cpu/armv7/socfpga/spl.c b/arch/arm/cpu/armv7/socfpga/spl.c
index 74bceab183..36a00c39b7 100644
--- a/arch/arm/cpu/armv7/socfpga/spl.c
+++ b/arch/arm/cpu/armv7/socfpga/spl.c
@@ -13,6 +13,7 @@
 #include <asm/arch/reset_manager.h>
 #include <spl.h>
 #include <asm/arch/system_manager.h>
+#include <asm/arch/freeze_controller.h>
 
 DECLARE_GLOBAL_DATA_PTR;
 
@@ -27,6 +28,10 @@ u32 spl_boot_device(void)
 void spl_board_init(void)
 {
 #ifndef CONFIG_SOCFPGA_VIRTUAL_TARGET
+	debug("Freezing all I/O banks\n");
+	/* freeze all IO banks */
+	sys_mgr_frzctrl_freeze_req();
+
 	/* configure the pin muxing through system manager */
 	sysmgr_pinmux_init();
 #endif /* CONFIG_SOCFPGA_VIRTUAL_TARGET */
@@ -34,6 +39,10 @@ void spl_board_init(void)
 	/* de-assert reset for peripherals and bridges based on handoff */
 	reset_deassert_peripherals_handoff();
 
+	debug("Unfreezing/Thaw all I/O banks\n");
+	/* unfreeze / thaw all IO banks */
+	sys_mgr_frzctrl_thaw_req();
+
 	/* enable console uart printing */
 	preloader_console_init();
 }
diff --git a/arch/arm/cpu/armv7/zynq/cpu.c b/arch/arm/cpu/armv7/zynq/cpu.c
index 2bb38438ae..9af340e75e 100644
--- a/arch/arm/cpu/armv7/zynq/cpu.c
+++ b/arch/arm/cpu/armv7/zynq/cpu.c
@@ -16,23 +16,24 @@ void lowlevel_init(void)
 int arch_cpu_init(void)
 {
 	zynq_slcr_unlock();
-	/* remap DDR to zero, FILTERSTART */
-	writel(0, &scu_base->filter_start);
 
 	/* Device config APB, unlock the PCAP */
 	writel(0x757BDF0D, &devcfg_base->unlock);
 	writel(0xFFFFFFFF, &devcfg_base->rom_shadow);
 
+#if (CONFIG_SYS_SDRAM_BASE == 0)
+	/* remap DDR to zero, FILTERSTART */
+	writel(0, &scu_base->filter_start);
+
 	/* OCM_CFG, Mask out the ROM, map ram into upper addresses */
 	writel(0x1F, &slcr_base->ocm_cfg);
 	/* FPGA_RST_CTRL, clear resets on AXI fabric ports */
 	writel(0x0, &slcr_base->fpga_rst_ctrl);
-	/* TZ_DDR_RAM, Set DDR trust zone non-secure */
-	writel(0xFFFFFFFF, &slcr_base->trust_zone);
 	/* Set urgent bits with register */
 	writel(0x0, &slcr_base->ddr_urgent_sel);
 	/* Urgent write, ports S2/S3 */
 	writel(0xC, &slcr_base->ddr_urgent);
+#endif
 
 	zynq_slcr_lock();
 
diff --git a/arch/arm/cpu/at91-common/Makefile b/arch/arm/cpu/at91-common/Makefile
new file mode 100644
index 0000000000..5b978384eb
--- /dev/null
+++ b/arch/arm/cpu/at91-common/Makefile
@@ -0,0 +1,12 @@
+#
+# (C) Copyright 2000-2008
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# (C) Copyright 2013 Atmel Corporation
+#		     Bo Shen <voice.shen@atmel.com>
+#
+# SPDX-License-Identifier:	GPL-2.0+
+#
+
+obj-$(CONFIG_AT91_WANTS_COMMON_PHY) += phy.o
+obj-$(CONFIG_SPL_BUILD) += mpddrc.o spl.o
diff --git a/arch/arm/cpu/at91-common/mpddrc.c b/arch/arm/cpu/at91-common/mpddrc.c
new file mode 100644
index 0000000000..8136396403
--- /dev/null
+++ b/arch/arm/cpu/at91-common/mpddrc.c
@@ -0,0 +1,124 @@
+/*
+ * Copyright (C) 2013 Atmel Corporation
+ *		      Bo Shen <voice.shen@atmel.com>
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <asm/arch/atmel_mpddrc.h>
+
+static inline void atmel_mpddr_op(int mode, u32 ram_address)
+{
+	struct atmel_mpddr *mpddr = (struct atmel_mpddr *)ATMEL_BASE_MPDDRC;
+
+	writel(mode, &mpddr->mr);
+	writel(0, ram_address);
+}
+
+int ddr2_init(const unsigned int ram_address,
+	      const struct atmel_mpddr *mpddr_value)
+{
+	struct atmel_mpddr *mpddr = (struct atmel_mpddr *)ATMEL_BASE_MPDDRC;
+	u32 ba_off, cr;
+
+	/* Compute bank offset according to NC in configuration register */
+	ba_off = (mpddr_value->cr & ATMEL_MPDDRC_CR_NC_MASK) + 9;
+	if (!(mpddr_value->cr & ATMEL_MPDDRC_CR_DECOD_INTERLEAVED))
+		ba_off += ((mpddr->cr & ATMEL_MPDDRC_CR_NR_MASK) >> 2) + 11;
+
+	ba_off += (mpddr_value->md & ATMEL_MPDDRC_MD_DBW_MASK) ? 1 : 2;
+
+	/* Program the memory device type into the memory device register */
+	writel(mpddr_value->md, &mpddr->md);
+
+	/* Program the configuration register */
+	writel(mpddr_value->cr, &mpddr->cr);
+
+	/* Program the timing register */
+	writel(mpddr_value->tpr0, &mpddr->tpr0);
+	writel(mpddr_value->tpr1, &mpddr->tpr1);
+	writel(mpddr_value->tpr2, &mpddr->tpr2);
+
+	/* Issue a NOP command */
+	atmel_mpddr_op(ATMEL_MPDDRC_MR_MODE_NOP_CMD, ram_address);
+
+	/* A 200 us is provided to precede any signal toggle */
+	udelay(200);
+
+	/* Issue a NOP command */
+	atmel_mpddr_op(ATMEL_MPDDRC_MR_MODE_NOP_CMD, ram_address);
+
+	/* Issue an all banks precharge command */
+	atmel_mpddr_op(ATMEL_MPDDRC_MR_MODE_PRCGALL_CMD, ram_address);
+
+	/* Issue an extended mode register set(EMRS2) to choose operation */
+	atmel_mpddr_op(ATMEL_MPDDRC_MR_MODE_EXT_LMR_CMD,
+		       ram_address + (0x2 << ba_off));
+
+	/* Issue an extended mode register set(EMRS3) to set EMSR to 0 */
+	atmel_mpddr_op(ATMEL_MPDDRC_MR_MODE_EXT_LMR_CMD,
+		       ram_address + (0x3 << ba_off));
+
+	/*
+	 * Issue an extended mode register set(EMRS1) to enable DLL and
+	 * program D.I.C (output driver impedance control)
+	 */
+	atmel_mpddr_op(ATMEL_MPDDRC_MR_MODE_EXT_LMR_CMD,
+		       ram_address + (0x1 << ba_off));
+
+	/* Enable DLL reset */
+	cr = readl(&mpddr->cr);
+	writel(cr | ATMEL_MPDDRC_CR_DLL_RESET_ENABLED, &mpddr->cr);
+
+	/* A mode register set(MRS) cycle is issued to reset DLL */
+	atmel_mpddr_op(ATMEL_MPDDRC_MR_MODE_LMR_CMD, ram_address);
+
+	/* Issue an all banks precharge command */
+	atmel_mpddr_op(ATMEL_MPDDRC_MR_MODE_PRCGALL_CMD, ram_address);
+
+	/* Two auto-refresh (CBR) cycles are provided */
+	atmel_mpddr_op(ATMEL_MPDDRC_MR_MODE_RFSH_CMD, ram_address);
+	atmel_mpddr_op(ATMEL_MPDDRC_MR_MODE_RFSH_CMD, ram_address);
+
+	/* Disable DLL reset */
+	cr = readl(&mpddr->cr);
+	writel(cr & (~ATMEL_MPDDRC_CR_DLL_RESET_ENABLED), &mpddr->cr);
+
+	/* A mode register set (MRS) cycle is issued to disable DLL reset */
+	atmel_mpddr_op(ATMEL_MPDDRC_MR_MODE_LMR_CMD, ram_address);
+
+	/* Set OCD calibration in default state */
+	cr = readl(&mpddr->cr);
+	writel(cr | ATMEL_MPDDRC_CR_OCD_DEFAULT, &mpddr->cr);
+
+	/*
+	 * An extended mode register set (EMRS1) cycle is issued
+	 * to OCD default value
+	 */
+	atmel_mpddr_op(ATMEL_MPDDRC_MR_MODE_EXT_LMR_CMD,
+		       ram_address + (0x1 << ba_off));
+
+	 /* OCD calibration mode exit */
+	cr = readl(&mpddr->cr);
+	writel(cr & (~ATMEL_MPDDRC_CR_OCD_DEFAULT), &mpddr->cr);
+
+	/*
+	 * An extended mode register set (EMRS1) cycle is issued
+	 * to enable OCD exit
+	 */
+	atmel_mpddr_op(ATMEL_MPDDRC_MR_MODE_EXT_LMR_CMD,
+		       ram_address + (0x1 << ba_off));
+
+	/* A nornal mode command is provided */
+	atmel_mpddr_op(ATMEL_MPDDRC_MR_MODE_NORMAL_CMD, ram_address);
+
+	/* Perform a write access to any DDR2-SDRAM address */
+	writel(0, ram_address);
+
+	/* Write the refresh rate */
+	writel(mpddr_value->rtr, &mpddr->rtr);
+
+	return 0;
+}
diff --git a/arch/arm/cpu/at91-common/phy.c b/arch/arm/cpu/at91-common/phy.c
new file mode 100644
index 0000000000..3b6c60ca56
--- /dev/null
+++ b/arch/arm/cpu/at91-common/phy.c
@@ -0,0 +1,57 @@
+/*
+ * (C) Copyright 2007-2008
+ * Stelian Pop <stelian@popies.net>
+ * Lead Tech Design <www.leadtechdesign.com>
+ *
+ * (C) Copyright 2012
+ * Markus Hubig <mhubig@imko.de>
+ * IMKO GmbH <www.imko.de>
+ *
+ * Copyright (C) 2013 DENX Software Engineering, hs@denx.de
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <asm/sizes.h>
+#include <asm/arch/at91_pmc.h>
+#include <asm/arch/at91_rstc.h>
+#include <watchdog.h>
+
+void at91_phy_reset(void)
+{
+	unsigned long erstl;
+	unsigned long start = get_timer(0);
+	unsigned long const timeout = 1000; /* 1000ms */
+	at91_rstc_t *rstc = (at91_rstc_t *)ATMEL_BASE_RSTC;
+
+	erstl = readl(&rstc->mr) & AT91_RSTC_MR_ERSTL_MASK;
+
+	/*
+	 * Need to reset PHY -> 500ms reset
+	 * Reset PHY by pulling the NRST line for 500ms to low. To do so
+	 * disable user reset for low level on NRST pin and poll the NRST
+	 * level in reset status register.
+	 */
+	writel(AT91_RSTC_KEY | AT91_RSTC_MR_ERSTL(0x0D) |
+		AT91_RSTC_MR_URSTEN, &rstc->mr);
+
+	writel(AT91_RSTC_KEY | AT91_RSTC_CR_EXTRST, &rstc->cr);
+
+	/* Wait for end of hardware reset */
+	while (!(readl(&rstc->sr) & AT91_RSTC_SR_NRSTL)) {
+		/* avoid shutdown by watchdog */
+		WATCHDOG_RESET();
+		mdelay(10);
+
+		/* timeout for not getting stuck in an endless loop */
+		if (get_timer(start) >= timeout) {
+			puts("*** ERROR: Timeout waiting for PHY reset!\n");
+			break;
+		}
+	};
+
+	/* Restore NRST value */
+	writel(AT91_RSTC_KEY | erstl | AT91_RSTC_MR_URSTEN, &rstc->mr);
+}
diff --git a/arch/arm/cpu/at91-common/spl.c b/arch/arm/cpu/at91-common/spl.c
new file mode 100644
index 0000000000..37c0cc4be5
--- /dev/null
+++ b/arch/arm/cpu/at91-common/spl.c
@@ -0,0 +1,90 @@
+/*
+ * Copyright (C) 2013 Atmel Corporation
+ *		      Bo Shen <voice.shen@atmel.com>
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <asm/arch/at91_common.h>
+#include <asm/arch/at91_pmc.h>
+#include <asm/arch/at91_wdt.h>
+#include <asm/arch/clk.h>
+#include <spl.h>
+
+static void at91_disable_wdt(void)
+{
+	struct at91_wdt *wdt = (struct at91_wdt *)ATMEL_BASE_WDT;
+
+	writel(AT91_WDT_MR_WDDIS, &wdt->mr);
+}
+
+void at91_plla_init(u32 pllar)
+{
+	struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC;
+
+	writel(pllar, &pmc->pllar);
+	while (!(readl(&pmc->sr) & (AT91_PMC_LOCKA | AT91_PMC_MCKRDY)))
+		;
+}
+
+void at91_mck_init(u32 mckr)
+{
+	struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC;
+	u32 tmp;
+
+	tmp = readl(&pmc->mckr);
+	tmp &= ~(AT91_PMC_MCKR_PRES_MASK |
+		 AT91_PMC_MCKR_MDIV_MASK |
+		 AT91_PMC_MCKR_PLLADIV_2);
+	tmp |= mckr & (AT91_PMC_MCKR_PRES_MASK |
+		       AT91_PMC_MCKR_MDIV_MASK |
+		       AT91_PMC_MCKR_PLLADIV_2);
+	writel(tmp, &pmc->mckr);
+
+	while (!(readl(&pmc->sr) & AT91_PMC_MCKRDY))
+		;
+}
+
+
+u32 spl_boot_device(void)
+{
+#ifdef CONFIG_SYS_USE_MMC
+	return BOOT_DEVICE_MMC1;
+#endif
+	return BOOT_DEVICE_NONE;
+}
+
+u32 spl_boot_mode(void)
+{
+	switch (spl_boot_device()) {
+#ifdef CONFIG_SYS_USE_MMC
+	case BOOT_DEVICE_MMC1:
+		return MMCSD_MODE_FAT;
+		break;
+#endif
+	case BOOT_DEVICE_NONE:
+	default:
+		hang();
+	}
+}
+
+void s_init(void)
+{
+	/* disable watchdog */
+	at91_disable_wdt();
+
+	/* PMC configuration */
+	at91_pmc_init();
+
+	at91_clock_init(CONFIG_SYS_AT91_MAIN_CLOCK);
+
+	timer_init();
+
+	board_early_init_f();
+
+	preloader_console_init();
+
+	mem_init();
+}
diff --git a/arch/arm/cpu/at91-common/u-boot-spl.lds b/arch/arm/cpu/at91-common/u-boot-spl.lds
new file mode 100644
index 0000000000..038335d3da
--- /dev/null
+++ b/arch/arm/cpu/at91-common/u-boot-spl.lds
@@ -0,0 +1,50 @@
+/*
+ * (C) Copyright 2002
+ * Gary Jennejohn, DENX Software Engineering, <garyj@denx.de>
+ *
+ * (C) Copyright 2010
+ * Texas Instruments, <www.ti.com>
+ *	Aneesh V <aneesh@ti.com>
+ *
+ * (C) 2013 Atmel Corporation
+ *	    Bo Shen <voice.shen@atmel.com>
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+MEMORY { .sram : ORIGIN = CONFIG_SPL_TEXT_BASE, \
+		LENGTH = CONFIG_SPL_MAX_SIZE }
+MEMORY { .sdram : ORIGIN = CONFIG_SPL_BSS_START_ADDR, \
+		LENGTH = CONFIG_SPL_BSS_MAX_SIZE }
+
+OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm")
+OUTPUT_ARCH(arm)
+ENTRY(_start)
+SECTIONS
+{
+	.text      :
+	{
+		__start = .;
+		arch/arm/cpu/armv7/start.o	(.text*)
+		*(.text*)
+	} >.sram
+
+	. = ALIGN(4);
+	.rodata : { *(SORT_BY_ALIGNMENT(.rodata*)) } >.sram
+
+	. = ALIGN(4);
+	.data : { *(SORT_BY_ALIGNMENT(.data*)) } >.sram
+
+	. = ALIGN(4);
+	__image_copy_end = .;
+	_end = .;
+
+	.bss :
+	{
+		. = ALIGN(4);
+		__bss_start = .;
+		*(.bss*)
+		. = ALIGN(4);
+		__bss_end = .;
+	} >.sdram
+}
diff --git a/arch/arm/cpu/ixp/u-boot.lds b/arch/arm/cpu/ixp/u-boot.lds
index c8d2e126ae..676ae2c4f9 100644
--- a/arch/arm/cpu/ixp/u-boot.lds
+++ b/arch/arm/cpu/ixp/u-boot.lds
@@ -79,10 +79,13 @@ SECTIONS
 		KEEP(*(.__bss_end));
 	}
 
-	/DISCARD/ : { *(.dynsym) }
-	/DISCARD/ : { *(.dynstr*) }
-	/DISCARD/ : { *(.dynamic*) }
-	/DISCARD/ : { *(.plt*) }
-	/DISCARD/ : { *(.interp*) }
-	/DISCARD/ : { *(.gnu*) }
+	.dynsym _end : { *(.dynsym) }
+	.dynbss : { *(.dynbss) }
+	.dynstr : { *(.dynstr*) }
+	.dynamic : { *(.dynamic*) }
+	.hash : { *(.hash*) }
+	.plt : { *(.plt*) }
+	.interp : { *(.interp*) }
+	.gnu : { *(.gnu*) }
+	.ARM.exidx : { *(.ARM.exidx*) }
 }
diff --git a/arch/arm/cpu/u-boot-spl.lds b/arch/arm/cpu/u-boot-spl.lds
index 36cc54a292..4880d0f78a 100644
--- a/arch/arm/cpu/u-boot-spl.lds
+++ b/arch/arm/cpu/u-boot-spl.lds
@@ -51,12 +51,15 @@ SECTIONS
 		__bss_end = .;
 	}
 
-	/DISCARD/ : { *(.dynsym) }
-	/DISCARD/ : { *(.dynstr*) }
-	/DISCARD/ : { *(.dynamic*) }
-	/DISCARD/ : { *(.plt*) }
-	/DISCARD/ : { *(.interp*) }
-	/DISCARD/ : { *(.gnu*) }
+	.dynsym _end : { *(.dynsym) }
+	.dynbss : { *(.dynbss) }
+	.dynstr : { *(.dynstr*) }
+	.dynamic : { *(.dynamic*) }
+	.hash : { *(.hash*) }
+	.plt : { *(.plt*) }
+	.interp : { *(.interp*) }
+	.gnu : { *(.gnu*) }
+	.ARM.exidx : { *(.ARM.exidx*) }
 }
 
 #if defined(CONFIG_SPL_MAX_SIZE)
diff --git a/arch/arm/cpu/u-boot.lds b/arch/arm/cpu/u-boot.lds
index 23bf030655..9463a33dcb 100644
--- a/arch/arm/cpu/u-boot.lds
+++ b/arch/arm/cpu/u-boot.lds
@@ -91,12 +91,14 @@ SECTIONS
 		KEEP(*(.__bss_end));
 	}
 
-	/DISCARD/ : { *(.dynsym) }
-	/DISCARD/ : { *(.dynstr*) }
-	/DISCARD/ : { *(.dynamic*) }
-	/DISCARD/ : { *(.plt*) }
-	/DISCARD/ : { *(.interp*) }
-	/DISCARD/ : { *(.gnu*) }
-	/DISCARD/ : { *(.ARM.exidx*) }
-	/DISCARD/ : { *(.gnu.linkonce.armexidx.*) }
+	.dynsym _end : { *(.dynsym) }
+	.hash : { *(.hash) }
+	.got.plt : { *(.got.plt) }
+	.dynbss : { *(.dynbss) }
+	.dynstr : { *(.dynstr*) }
+	.dynamic : { *(.dynamic*) }
+	.plt : { *(.plt*) }
+	.interp : { *(.interp*) }
+	.gnu : { *(.gnu*) }
+	.ARM.exidx : { *(.ARM.exidx*) }
 }
diff --git a/arch/arm/include/asm/arch-am33xx/ddr_defs.h b/arch/arm/include/asm/arch-am33xx/ddr_defs.h
index fe48b5fedc..2278358ab2 100644
--- a/arch/arm/include/asm/arch-am33xx/ddr_defs.h
+++ b/arch/arm/include/asm/arch-am33xx/ddr_defs.h
@@ -18,7 +18,6 @@
 #define VTP_CTRL_READY		(0x1 << 5)
 #define VTP_CTRL_ENABLE		(0x1 << 6)
 #define VTP_CTRL_START_EN	(0x1)
-#define PHY_DLL_LOCK_DIFF	0x0
 #define DDR_CKE_CTRL_NORMAL	0x1
 #define PHY_EN_DYN_PWRDN	(0x1 << 20)
 
@@ -29,7 +28,6 @@
 #define MT47H128M16RT25E_EMIF_TIM3		0x0000033F
 #define MT47H128M16RT25E_EMIF_SDCFG		0x41805332
 #define MT47H128M16RT25E_EMIF_SDREF		0x0000081a
-#define MT47H128M16RT25E_DLL_LOCK_DIFF		0x0
 #define MT47H128M16RT25E_RATIO			0x80
 #define MT47H128M16RT25E_INVERT_CLKOUT		0x00
 #define MT47H128M16RT25E_RD_DQS			0x12
@@ -38,7 +36,6 @@
 #define MT47H128M16RT25E_PHY_GATELVL		0x00
 #define MT47H128M16RT25E_PHY_WR_DATA		0x40
 #define MT47H128M16RT25E_PHY_FIFO_WE		0x80
-#define MT47H128M16RT25E_PHY_RANK0_DELAY		0x1
 #define MT47H128M16RT25E_IOCTRL_VALUE		0x18B
 
 /* Micron MT41J128M16JT-125 */
@@ -49,7 +46,6 @@
 #define MT41J128MJT125_EMIF_SDCFG		0x61C04AB2
 #define MT41J128MJT125_EMIF_SDREF		0x0000093B
 #define MT41J128MJT125_ZQ_CFG			0x50074BE4
-#define MT41J128MJT125_DLL_LOCK_DIFF		0x1
 #define MT41J128MJT125_RATIO			0x40
 #define MT41J128MJT125_INVERT_CLKOUT		0x1
 #define MT41J128MJT125_RD_DQS			0x3B
@@ -58,6 +54,12 @@
 #define MT41J128MJT125_PHY_FIFO_WE		0x100
 #define MT41J128MJT125_IOCTRL_VALUE		0x18B
 
+/* Micron MT41J64M16JT-125 */
+#define MT41J64MJT125_EMIF_SDCFG		0x61C04A32
+
+/* Micron MT41J256M16JT-125 */
+#define MT41J256MJT125_EMIF_SDCFG		0x61C04B32
+
 /* Micron MT41J256M8HX-15E */
 #define MT41J256M8HX15E_EMIF_READ_LATENCY	0x06
 #define MT41J256M8HX15E_EMIF_TIM1		0x0888A39B
@@ -66,7 +68,6 @@
 #define MT41J256M8HX15E_EMIF_SDCFG		0x61C04B32
 #define MT41J256M8HX15E_EMIF_SDREF		0x0000093B
 #define MT41J256M8HX15E_ZQ_CFG			0x50074BE4
-#define MT41J256M8HX15E_DLL_LOCK_DIFF		0x1
 #define MT41J256M8HX15E_RATIO			0x40
 #define MT41J256M8HX15E_INVERT_CLKOUT		0x1
 #define MT41J256M8HX15E_RD_DQS			0x3B
@@ -83,7 +84,6 @@
 #define MT41K256M16HA125E_EMIF_SDCFG		0x61C05332
 #define MT41K256M16HA125E_EMIF_SDREF		0xC30
 #define MT41K256M16HA125E_ZQ_CFG		0x50074BE4
-#define MT41K256M16HA125E_DLL_LOCK_DIFF		0x1
 #define MT41K256M16HA125E_RATIO			0x80
 #define MT41K256M16HA125E_INVERT_CLKOUT		0x0
 #define MT41K256M16HA125E_RD_DQS		0x38
@@ -100,7 +100,6 @@
 #define MT41J512M8RH125_EMIF_SDCFG		0x61C04BB2
 #define MT41J512M8RH125_EMIF_SDREF		0x0000093B
 #define MT41J512M8RH125_ZQ_CFG			0x50074BE4
-#define MT41J512M8RH125_DLL_LOCK_DIFF		0x1
 #define MT41J512M8RH125_RATIO			0x80
 #define MT41J512M8RH125_INVERT_CLKOUT		0x0
 #define MT41J512M8RH125_RD_DQS			0x3B
@@ -117,7 +116,6 @@
 #define K4B2G1646EBIH9_EMIF_SDCFG		0x61C052B2
 #define K4B2G1646EBIH9_EMIF_SDREF		0x00000C30
 #define K4B2G1646EBIH9_ZQ_CFG			0x50074BE4
-#define K4B2G1646EBIH9_DLL_LOCK_DIFF		0x1
 #define K4B2G1646EBIH9_RATIO			0x80
 #define K4B2G1646EBIH9_INVERT_CLKOUT		0x0
 #define K4B2G1646EBIH9_RD_DQS			0x35
@@ -149,18 +147,15 @@ void config_ddr_phy(const struct emif_regs *regs, int nr);
 struct ddr_cmd_regs {
 	unsigned int resv0[7];
 	unsigned int cm0csratio;	/* offset 0x01C */
-	unsigned int resv1[2];
-	unsigned int cm0dldiff;		/* offset 0x028 */
+	unsigned int resv1[3];
 	unsigned int cm0iclkout;	/* offset 0x02C */
 	unsigned int resv2[8];
 	unsigned int cm1csratio;	/* offset 0x050 */
-	unsigned int resv3[2];
-	unsigned int cm1dldiff;		/* offset 0x05C */
+	unsigned int resv3[3];
 	unsigned int cm1iclkout;	/* offset 0x060 */
 	unsigned int resv4[8];
 	unsigned int cm2csratio;	/* offset 0x084 */
-	unsigned int resv5[2];
-	unsigned int cm2dldiff;		/* offset 0x090 */
+	unsigned int resv5[3];
 	unsigned int cm2iclkout;	/* offset 0x094 */
 	unsigned int resv6[3];
 };
@@ -197,24 +192,21 @@ struct ddr_regs {
 	unsigned int cm0configclk;	/* offset 0x010 */
 	unsigned int resv1[2];
 	unsigned int cm0csratio;	/* offset 0x01C */
-	unsigned int resv2[2];
-	unsigned int cm0dldiff;		/* offset 0x028 */
+	unsigned int resv2[3];
 	unsigned int cm0iclkout;	/* offset 0x02C */
 	unsigned int resv3[4];
 	unsigned int cm1config;		/* offset 0x040 */
 	unsigned int cm1configclk;	/* offset 0x044 */
 	unsigned int resv4[2];
 	unsigned int cm1csratio;	/* offset 0x050 */
-	unsigned int resv5[2];
-	unsigned int cm1dldiff;		/* offset 0x05C */
+	unsigned int resv5[3];
 	unsigned int cm1iclkout;	/* offset 0x060 */
 	unsigned int resv6[4];
 	unsigned int cm2config;		/* offset 0x074 */
 	unsigned int cm2configclk;	/* offset 0x078 */
 	unsigned int resv7[2];
 	unsigned int cm2csratio;	/* offset 0x084 */
-	unsigned int resv8[2];
-	unsigned int cm2dldiff;		/* offset 0x090 */
+	unsigned int resv8[3];
 	unsigned int cm2iclkout;	/* offset 0x094 */
 	unsigned int resv9[12];
 	unsigned int dt0rdsratio0;	/* offset 0x0C8 */
@@ -243,17 +235,14 @@ struct cmd_control {
 	unsigned long cmd0csratio;
 	unsigned long cmd0csforce;
 	unsigned long cmd0csdelay;
-	unsigned long cmd0dldiff;
 	unsigned long cmd0iclkout;
 	unsigned long cmd1csratio;
 	unsigned long cmd1csforce;
 	unsigned long cmd1csdelay;
-	unsigned long cmd1dldiff;
 	unsigned long cmd1iclkout;
 	unsigned long cmd2csratio;
 	unsigned long cmd2csforce;
 	unsigned long cmd2csdelay;
-	unsigned long cmd2dldiff;
 	unsigned long cmd2iclkout;
 };
 
@@ -267,8 +256,6 @@ struct ddr_data {
 	unsigned long datagiratio0;
 	unsigned long datafwsratio0;
 	unsigned long datawrsratio0;
-	unsigned long datauserank0delay;
-	unsigned long datadldiff0;
 };
 
 /**
diff --git a/arch/arm/include/asm/arch-at91/at91_common.h b/arch/arm/include/asm/arch-at91/at91_common.h
index abcb97d107..59e2f4391c 100644
--- a/arch/arm/include/asm/arch-at91/at91_common.h
+++ b/arch/arm/include/asm/arch-at91/at91_common.h
@@ -22,5 +22,10 @@ void at91_spi1_hw_init(unsigned long cs_mask);
 void at91_udp_hw_init(void);
 void at91_uhp_hw_init(void);
 void at91_lcd_hw_init(void);
+void at91_plla_init(u32 pllar);
+void at91_mck_init(u32 mckr);
+void at91_pmc_init(void);
+void mem_init(void);
+void at91_phy_reset(void);
 
 #endif /* AT91_COMMON_H */
diff --git a/arch/arm/include/asm/arch-at91/at91_pio.h b/arch/arm/include/asm/arch-at91/at91_pio.h
index 676f024e47..50464ffe8e 100644
--- a/arch/arm/include/asm/arch-at91/at91_pio.h
+++ b/arch/arm/include/asm/arch-at91/at91_pio.h
@@ -151,37 +151,4 @@ int at91_get_pio_value(unsigned port, unsigned pin);
 #define	AT91_PIO_PORTD		0x3
 #define	AT91_PIO_PORTE		0x4
 
-#ifdef CONFIG_AT91_LEGACY
-
-#define PIO_PER		0x00	/* Enable Register */
-#define PIO_PDR		0x04	/* Disable Register */
-#define PIO_PSR		0x08	/* Status Register */
-#define PIO_OER		0x10	/* Output Enable Register */
-#define PIO_ODR		0x14	/* Output Disable Register */
-#define PIO_OSR		0x18	/* Output Status Register */
-#define PIO_IFER	0x20	/* Glitch Input Filter Enable */
-#define PIO_IFDR	0x24	/* Glitch Input Filter Disable */
-#define PIO_IFSR	0x28	/* Glitch Input Filter Status */
-#define PIO_SODR	0x30	/* Set Output Data Register */
-#define PIO_CODR	0x34	/* Clear Output Data Register */
-#define PIO_ODSR	0x38	/* Output Data Status Register */
-#define PIO_PDSR	0x3c	/* Pin Data Status Register */
-#define PIO_IER		0x40	/* Interrupt Enable Register */
-#define PIO_IDR		0x44	/* Interrupt Disable Register */
-#define PIO_IMR		0x48	/* Interrupt Mask Register */
-#define PIO_ISR		0x4c	/* Interrupt Status Register */
-#define PIO_MDER	0x50	/* Multi-driver Enable Register */
-#define PIO_MDDR	0x54	/* Multi-driver Disable Register */
-#define PIO_MDSR	0x58	/* Multi-driver Status Register */
-#define PIO_PUDR	0x60	/* Pull-up Disable Register */
-#define PIO_PUER	0x64	/* Pull-up Enable Register */
-#define PIO_PUSR	0x68	/* Pull-up Status Register */
-#define PIO_ASR		0x70	/* Peripheral A Select Register */
-#define PIO_BSR		0x74	/* Peripheral B Select Register */
-#define PIO_ABSR	0x78	/* AB Status Register */
-#define PIO_OWER	0xa0	/* Output Write Enable Register */
-#define PIO_OWDR	0xa4	/* Output Write Disable Register */
-#define PIO_OWSR	0xa8	/* Output Write Status Register */
-#endif
-
 #endif
diff --git a/arch/arm/include/asm/arch-at91/at91_pit.h b/arch/arm/include/asm/arch-at91/at91_pit.h
index d314b062bf..56724f15e7 100644
--- a/arch/arm/include/asm/arch-at91/at91_pit.h
+++ b/arch/arm/include/asm/arch-at91/at91_pit.h
@@ -25,20 +25,4 @@ typedef struct at91_pit {
 #define		AT91_PIT_MR_PIV_MASK(x)	(x & 0x000fffff)
 #define		AT91_PIT_MR_PIV(x)	(x & AT91_PIT_MR_PIV_MASK)
 
-#ifdef CONFIG_AT91_LEGACY
-
-#define AT91_PIT_MR		(AT91_PIT + 0x00)	/* Mode Register */
-#define		AT91_PIT_PITIEN		(1 << 25)		/* Timer Interrupt Enable */
-#define		AT91_PIT_PITEN		(1 << 24)		/* Timer Enabled */
-#define		AT91_PIT_PIV		(0xfffff)		/* Periodic Interval Value */
-
-#define AT91_PIT_SR		(AT91_PIT + 0x04)	/* Status Register */
-#define		AT91_PIT_PITS		(1 << 0)		/* Timer Status */
-
-#define AT91_PIT_PIVR		(AT91_PIT + 0x08)	/* Periodic Interval Value Register */
-#define AT91_PIT_PIIR		(AT91_PIT + 0x0c)	/* Periodic Interval Image Register */
-#define		AT91_PIT_PICNT		(0xfff << 20)		/* Interval Counter */
-#define		AT91_PIT_CPIV		(0xfffff)		/* Inverval Value */
-
-#endif /* CONFIG_AT91_LEGACY */
 #endif
diff --git a/arch/arm/include/asm/arch-at91/at91_pmc.h b/arch/arm/include/asm/arch-at91/at91_pmc.h
index 7b36f74f83..4535608434 100644
--- a/arch/arm/include/asm/arch-at91/at91_pmc.h
+++ b/arch/arm/include/asm/arch-at91/at91_pmc.h
@@ -14,13 +14,15 @@
 #ifndef AT91_PMC_H
 #define AT91_PMC_H
 
+#ifdef __ASSEMBLY__
+
 #define	AT91_ASM_PMC_MOR	(ATMEL_BASE_PMC + 0x20)
 #define	AT91_ASM_PMC_PLLAR	(ATMEL_BASE_PMC + 0x28)
 #define	AT91_ASM_PMC_PLLBR	(ATMEL_BASE_PMC + 0x2c)
 #define AT91_ASM_PMC_MCKR	(ATMEL_BASE_PMC + 0x30)
 #define AT91_ASM_PMC_SR		(ATMEL_BASE_PMC + 0x68)
 
-#ifndef __ASSEMBLY__
+#else
 
 #include <asm/types.h>
 
@@ -73,7 +75,11 @@ typedef struct at91_pmc {
 #define AT91_PMC_PLLXR_DIV(x)		(x & 0xFF)
 #define AT91_PMC_PLLXR_PLLCOUNT(x)	((x & 0x3F) << 8)
 #define AT91_PMC_PLLXR_OUT(x)		((x & 0x03) << 14)
+#ifdef CONFIG_SAMA5D3
+#define AT91_PMC_PLLXR_MUL(x)		((x & 0x7F) << 18)
+#else
 #define AT91_PMC_PLLXR_MUL(x)		((x & 0x7FF) << 16)
+#endif
 #define AT91_PMC_PLLAR_29		0x20000000
 #define AT91_PMC_PLLBR_USBDIV_1		0x00000000
 #define AT91_PMC_PLLBR_USBDIV_2		0x10000000
@@ -124,8 +130,8 @@ typedef struct at91_pmc {
 #define AT91_PMC_MCKR_MDIV_MASK		0x00000300
 #endif
 
-#define AT91_PMC_MCKR_PLLADIV_1		0x00001000
-#define AT91_PMC_MCKR_PLLADIV_2		0x00002000
+#define AT91_PMC_MCKR_PLLADIV_1		0x00000000
+#define AT91_PMC_MCKR_PLLADIV_2		0x00001000
 
 #define AT91_PMC_IXR_MOSCS		0x00000001
 #define AT91_PMC_IXR_LOCKA		0x00000002
@@ -137,13 +143,6 @@ typedef struct at91_pmc {
 #define AT91_PMC_IXR_PCKRDY2		0x00000400
 #define AT91_PMC_IXR_PCKRDY3		0x00000800
 
-#ifdef CONFIG_AT91_LEGACY
-#define	AT91_PMC_SCER		(AT91_PMC + 0x00)	/* System Clock Enable Register */
-#define	AT91_PMC_SCDR		(AT91_PMC + 0x04)	/* System Clock Disable Register */
-
-#define	AT91_PMC_SCSR		(AT91_PMC + 0x08)	/* System Clock Status Register */
-#endif
-
 #define		AT91_PMC_PCK		(1 <<  0)		/* Processor Clock */
 #define		AT91RM9200_PMC_UDP	(1 <<  1)		/* USB Devcice Port Clock [AT91RM9200 only] */
 #define		AT91RM9200_PMC_MCKUDP	(1 <<  2)		/* USB Device Port Master Clock Automatic Disable on Suspend [AT91RM9200 only] */
@@ -159,34 +158,18 @@ typedef struct at91_pmc {
 #define		AT91_PMC_HCK0		(1 << 16)		/* AHB Clock (USB host) [AT91SAM9261 only] */
 #define		AT91_PMC_HCK1		(1 << 17)		/* AHB Clock (LCD) [AT91SAM9261 only] */
 
-#ifdef CONFIG_AT91_LEGACY
-#define	AT91_PMC_PCER		(AT91_PMC + 0x10)	/* Peripheral Clock Enable Register */
-#define	AT91_PMC_PCDR		(AT91_PMC + 0x14)	/* Peripheral Clock Disable Register */
-#define	AT91_PMC_PCSR		(AT91_PMC + 0x18)	/* Peripheral Clock Status Register */
-
-#define	AT91_CKGR_UCKR		(AT91_PMC + 0x1C)	/* UTMI Clock Register [SAM9RL, CAP9] */
-#endif
-
 #define		AT91_PMC_UPLLEN		(1   << 16)		/* UTMI PLL Enable */
 #define		AT91_PMC_UPLLCOUNT	(0xf << 20)		/* UTMI PLL Start-up Time */
 #define		AT91_PMC_BIASEN		(1   << 24)		/* UTMI BIAS Enable */
 #define		AT91_PMC_BIASCOUNT	(0xf << 28)		/* UTMI PLL Start-up Time */
 
-#ifdef CONFIG_AT91_LEGACY
-#define	AT91_CKGR_MOR		(AT91_PMC + 0x20)	/* Main Oscillator Register [not on SAM9RL] */
-#endif
 #define		AT91_PMC_MOSCEN		(1    << 0)		/* Main Oscillator Enable */
 #define		AT91_PMC_OSCBYPASS	(1    << 1)		/* Oscillator Bypass [SAM9x, CAP9] */
 #define		AT91_PMC_OSCOUNT	(0xff << 8)		/* Main Oscillator Start-up Time */
-#ifdef CONFIG_AT91_LEGACY
-#define	AT91_CKGR_MCFR		(AT91_PMC + 0x24)	/* Main Clock Frequency Register */
-#endif
+
 #define		AT91_PMC_MAINF		(0xffff <<  0)		/* Main Clock Frequency */
 #define		AT91_PMC_MAINRDY	(1	<< 16)		/* Main Clock Ready */
-#ifdef CONFIG_AT91_LEGACY
-#define	AT91_CKGR_PLLAR		(AT91_PMC + 0x28)	/* PLL A Register */
-#define	AT91_CKGR_PLLBR		(AT91_PMC + 0x2c)	/* PLL B Register */
-#endif
+
 #define		AT91_PMC_DIV		(0xff  <<  0)		/* Divider */
 #define		AT91_PMC_PLLCOUNT	(0x3f  <<  8)		/* PLL Counter */
 #define		AT91_PMC_OUT		(3     << 14)		/* PLL Clock Frequency Range */
@@ -198,9 +181,6 @@ typedef struct at91_pmc {
 #define		AT91_PMC_USB96M		(1     << 28)		/* Divider by 2 Enable (PLLB only) */
 #define		AT91_PMC_PLLA_WR_ERRATA	(1     << 29)		/* Bit 29 must always be set to 1 when programming the CKGR_PLLAR register */
 
-#ifdef CONFIG_AT91_LEGACY
-#define	AT91_PMC_MCKR		(AT91_PMC + 0x30)	/* Master Clock Register */
-#endif
 #define		AT91_PMC_CSS		(3 <<  0)		/* Master Clock Selection */
 #define			AT91_PMC_CSS_SLOW		(0 << 0)
 #define			AT91_PMC_CSS_MAIN		(1 << 0)
@@ -228,9 +208,6 @@ typedef struct at91_pmc {
 #define			AT91_PMC_PDIV_1			(0 << 12)
 #define			AT91_PMC_PDIV_2			(1 << 12)
 
-#ifdef CONFIG_AT91_LEGACY
-#define		AT91_PMC_USB			(AT91_PMC + 0x38)	/* USB Clock Register */
-#endif
 #define		AT91_PMC_USBS_USB_PLLA		(0x0)		/* USB Clock Input is PLLA */
 #define		AT91_PMC_USBS_USB_UPLL		(0x1)		/* USB Clock Input is UPLL */
 #define		AT91_PMC_USBS_USB_PLLB		(0x1)		/* USB Clock Input is PLLB, AT91SAM9N12 only */
@@ -238,13 +215,6 @@ typedef struct at91_pmc {
 #define		AT91_PMC_USBDIV_8		(0x7 <<  8)	/* USB Clock divided by 8 */
 #define		AT91_PMC_USBDIV_10		(0x9 <<  8)	/* USB Clock divided by 10 */
 
-#ifdef CONFIG_AT91_LEGACY
-#define	AT91_PMC_PCKR(n)	(AT91_PMC + 0x40 + ((n) * 4))	/* Programmable Clock 0-3 Registers */
-
-#define	AT91_PMC_IER		(AT91_PMC + 0x60)	/* Interrupt Enable Register */
-#define	AT91_PMC_IDR		(AT91_PMC + 0x64)	/* Interrupt Disable Register */
-#define	AT91_PMC_SR		(AT91_PMC + 0x68)	/* Status Register */
-#endif
 #define		AT91_PMC_MOSCS		(1 <<  0)		/* MOSCS Flag */
 #define		AT91_PMC_LOCKA		(1 <<  1)		/* PLLA Lock */
 #define		AT91_PMC_LOCKB		(1 <<  2)		/* PLLB Lock */
@@ -255,13 +225,6 @@ typedef struct at91_pmc {
 #define		AT91_PMC_PCK1RDY	(1 <<  9)		/* Programmable Clock 1 */
 #define		AT91_PMC_PCK2RDY	(1 << 10)		/* Programmable Clock 2 */
 #define		AT91_PMC_PCK3RDY	(1 << 11)		/* Programmable Clock 3 */
-#ifdef CONFIG_AT91_LEGACY
-#define	AT91_PMC_IMR		(AT91_PMC + 0x6c)	/* Interrupt Mask Register */
 
-#define AT91_PMC_PROT		(AT91_PMC + 0xe4)	/* Protect Register [AT91CAP9 revC only] */
-#endif
 #define		AT91_PMC_PROTKEY	0x504d4301	/* Activation Code */
-#ifdef CONFIG_AT91_LEGACY
-#define AT91_PMC_VER		(AT91_PMC + 0xfc)	/* PMC Module Version [AT91CAP9 only] */
-#endif /* CONFIG_AT91_LEGACY */
 #endif
diff --git a/arch/arm/include/asm/arch-at91/at91_spi.h b/arch/arm/include/asm/arch-at91/at91_spi.h
index f44cf67849..b18665b62c 100644
--- a/arch/arm/include/asm/arch-at91/at91_spi.h
+++ b/arch/arm/include/asm/arch-at91/at91_spi.h
@@ -118,6 +118,6 @@ typedef struct at91_spi {
 
 #define AT91_SPI_PTSR		0x0124			/* PDC Transfer Status Register */
 
-#endif /* CONFIG_AT91_LEGACY */
+#endif /* CONFIG_ATMEL_LEGACY */
 
 #endif
diff --git a/arch/arm/include/asm/arch-at91/at91_wdt.h b/arch/arm/include/asm/arch-at91/at91_wdt.h
index f0f4ed154a..0644bbf3c6 100644
--- a/arch/arm/include/asm/arch-at91/at91_wdt.h
+++ b/arch/arm/include/asm/arch-at91/at91_wdt.h
@@ -40,25 +40,4 @@ typedef struct at91_wdt {
 #define AT91_WDT_MR_WDDBGHLT		0x10000000
 #define AT91_WDT_MR_WDIDLEHLT		0x20000000
 
-#ifdef CONFIG_AT91_LEGACY
-
-#define AT91_WDT_CR		(AT91_WDT + 0x00)	/* Watchdog Control Register */
-#define		AT91_WDT_WDRSTT		(1    << 0)		/* Restart */
-#define		AT91_WDT_KEY		(0xa5 << 24)		/* KEY Password */
-
-#define AT91_WDT_MR		(AT91_WDT + 0x04)	/* Watchdog Mode Register */
-#define		AT91_WDT_WDV		(0xfff << 0)		/* Counter Value */
-#define		AT91_WDT_WDFIEN		(1     << 12)		/* Fault Interrupt Enable */
-#define		AT91_WDT_WDRSTEN	(1     << 13)		/* Reset Processor */
-#define		AT91_WDT_WDRPROC	(1     << 14)		/* Timer Restart */
-#define		AT91_WDT_WDDIS		(1     << 15)		/* Watchdog Disable */
-#define		AT91_WDT_WDD		(0xfff << 16)		/* Delta Value */
-#define		AT91_WDT_WDDBGHLT	(1     << 28)		/* Debug Halt */
-#define		AT91_WDT_WDIDLEHLT	(1     << 29)		/* Idle Halt */
-
-#define AT91_WDT_SR		(AT91_WDT + 0x08)	/* Watchdog Status Register */
-#define		AT91_WDT_WDUNF		(1 << 0)		/* Watchdog Underflow */
-#define		AT91_WDT_WDERR		(1 << 1)		/* Watchdog Error */
-
-#endif /* CONFIG_AT91_LEGACY */
 #endif
diff --git a/arch/arm/include/asm/arch-at91/at91cap9.h b/arch/arm/include/asm/arch-at91/at91cap9.h
index 7ac5bc1e7a..63870bc65d 100644
--- a/arch/arm/include/asm/arch-at91/at91cap9.h
+++ b/arch/arm/include/asm/arch-at91/at91cap9.h
@@ -55,75 +55,6 @@
 #define AT91_RSTC_BASE	0xfffffd00
 #define AT91_PIT_BASE	0xfffffd30
 
-#ifdef CONFIG_AT91_LEGACY
-
-/*
- * User Peripheral physical base addresses.
- */
-#define AT91CAP9_BASE_UDPHS		0xfff78000
-#define AT91CAP9_BASE_TCB0		0xfff7c000
-#define AT91CAP9_BASE_TC0		0xfff7c000
-#define AT91CAP9_BASE_TC1		0xfff7c040
-#define AT91CAP9_BASE_TC2		0xfff7c080
-#define AT91CAP9_BASE_MCI0		0xfff80000
-#define AT91CAP9_BASE_MCI1		0xfff84000
-#define AT91CAP9_BASE_TWI		0xfff88000
-#define AT91CAP9_BASE_US0		0xfff8c000
-#define AT91CAP9_BASE_US1		0xfff90000
-#define AT91CAP9_BASE_US2		0xfff94000
-#define AT91CAP9_BASE_SSC0		0xfff98000
-#define AT91CAP9_BASE_SSC1		0xfff9c000
-#define AT91CAP9_BASE_AC97C		0xfffa0000
-#define AT91CAP9_BASE_SPI0		0xfffa4000
-#define AT91CAP9_BASE_SPI1		0xfffa8000
-#define AT91CAP9_BASE_CAN		0xfffac000
-#define AT91CAP9_BASE_PWMC		0xfffb8000
-#define AT91CAP9_BASE_EMAC		0xfffbc000
-#define AT91CAP9_BASE_ADC		0xfffc0000
-#define AT91CAP9_BASE_ISI		0xfffc4000
-#define AT91_BASE_SYS			0xffffe200
-
-/*
- * System Peripherals (offset from AT91_BASE_SYS)
- */
-#define AT91_ECC	(0xffffe200 - AT91_BASE_SYS)
-#define AT91_BCRAMC	(0xffffe400 - AT91_BASE_SYS)
-#define AT91_DDRSDRC	(0xffffe600 - AT91_BASE_SYS)
-#define AT91_SMC	(0xffffe800 - AT91_BASE_SYS)
-#define AT91_MATRIX	(0xffffea00 - AT91_BASE_SYS)
-#define AT91_CCFG	(0xffffeb10 - AT91_BASE_SYS)
-#define AT91_DMA	(0xffffec00 - AT91_BASE_SYS)
-#define AT91_DBGU	(0xffffee00 - AT91_BASE_SYS)
-#define AT91_AIC	(0xfffff000 - AT91_BASE_SYS)
-#define AT91_PIOA	(0xfffff200 - AT91_BASE_SYS)
-#define AT91_PIOB	(0xfffff400 - AT91_BASE_SYS)
-#define AT91_PIOC	(0xfffff600 - AT91_BASE_SYS)
-#define AT91_PIOD	(0xfffff800 - AT91_BASE_SYS)
-#define AT91_PMC	(0xfffffc00 - AT91_BASE_SYS)
-#define AT91_RSTC	(0xfffffd00 - AT91_BASE_SYS)
-#define AT91_SHDWC	(0xfffffd10 - AT91_BASE_SYS)
-#define AT91_RTT	(0xfffffd20 - AT91_BASE_SYS)
-#define AT91_PIT	(0xfffffd30 - AT91_BASE_SYS)
-#define AT91_WDT	(0xfffffd40 - AT91_BASE_SYS)
-#define AT91_SCKCR	(0xfffffd50 - AT91_BASE_SYS)
-#define AT91_GPBR_REVB	(0xfffffd50 - AT91_BASE_SYS)
-#define AT91_GPBR_REVC	(0xfffffd60 - AT91_BASE_SYS)
-
-#define AT91_USART0	AT91CAP9_BASE_US0
-#define AT91_USART1	AT91CAP9_BASE_US1
-#define AT91_USART2	AT91CAP9_BASE_US2
-
-/*
- * SCKCR flags
- */
-#define AT91CAP9_SCKCR_RCEN	(1 << 0)	/* RC Oscillator Enable */
-#define AT91CAP9_SCKCR_OSC32EN	(1 << 1)	/* 32kHz Oscillator Enable */
-#define AT91CAP9_SCKCR_OSC32BYP	(1 << 2)	/* 32kHz Oscillator Bypass */
-#define AT91CAP9_SCKCR_OSCSEL	(1 << 3)	/* Slow Clock Selector */
-#define		AT91CAP9_SCKCR_OSCSEL_RC	(0 << 3)
-#define		AT91CAP9_SCKCR_OSCSEL_32	(1 << 3)
-
-#endif /* CONFIG_AT91_LEGACY */
 /*
  * Internal Memory.
  */
diff --git a/arch/arm/include/asm/arch-at91/at91sam9_smc.h b/arch/arm/include/asm/arch-at91/at91sam9_smc.h
index ec5d79735e..d29e98e711 100644
--- a/arch/arm/include/asm/arch-at91/at91sam9_smc.h
+++ b/arch/arm/include/asm/arch-at91/at91sam9_smc.h
@@ -73,64 +73,4 @@ typedef struct	at91_smc {
 #define AT91_SMC_MODE_PS_16		0x20000000
 #define AT91_SMC_MODE_PS_32		0x30000000
 
-#ifdef CONFIG_AT91_LEGACY
-
-#define AT91_SMC_SETUP(n)	(AT91_SMC + 0x00 + ((n)*0x10))	/* Setup Register for CS n */
-#define		AT91_SMC_NWESETUP	(0x3f << 0)			/* NWE Setup Length */
-#define			AT91_SMC_NWESETUP_(x)	((x) << 0)
-#define		AT91_SMC_NCS_WRSETUP	(0x3f << 8)			/* NCS Setup Length in Write Access */
-#define			AT91_SMC_NCS_WRSETUP_(x)	((x) << 8)
-#define		AT91_SMC_NRDSETUP	(0x3f << 16)			/* NRD Setup Length */
-#define			AT91_SMC_NRDSETUP_(x)	((x) << 16)
-#define		AT91_SMC_NCS_RDSETUP	(0x3f << 24)			/* NCS Setup Length in Read Access */
-#define			AT91_SMC_NCS_RDSETUP_(x)	((x) << 24)
-
-#define AT91_SMC_PULSE(n)	(AT91_SMC + 0x04 + ((n)*0x10))	/* Pulse Register for CS n */
-#define		AT91_SMC_NWEPULSE	(0x7f <<  0)			/* NWE Pulse Length */
-#define			AT91_SMC_NWEPULSE_(x)	((x) << 0)
-#define		AT91_SMC_NCS_WRPULSE	(0x7f <<  8)			/* NCS Pulse Length in Write Access */
-#define			AT91_SMC_NCS_WRPULSE_(x)((x) << 8)
-#define		AT91_SMC_NRDPULSE	(0x7f << 16)			/* NRD Pulse Length */
-#define			AT91_SMC_NRDPULSE_(x)	((x) << 16)
-#define		AT91_SMC_NCS_RDPULSE	(0x7f << 24)			/* NCS Pulse Length in Read Access */
-#define			AT91_SMC_NCS_RDPULSE_(x)((x) << 24)
-
-#define AT91_SMC_CYCLE(n)	(AT91_SMC + 0x08 + ((n)*0x10))	/* Cycle Register for CS n */
-#define		AT91_SMC_NWECYCLE	(0x1ff << 0 )			/* Total Write Cycle Length */
-#define			AT91_SMC_NWECYCLE_(x)	((x) << 0)
-#define		AT91_SMC_NRDCYCLE	(0x1ff << 16)			/* Total Read Cycle Length */
-#define			AT91_SMC_NRDCYCLE_(x)	((x) << 16)
-
-#define AT91_SMC_MODE(n)	(AT91_SMC + 0x0c + ((n)*0x10))	/* Mode Register for CS n */
-#define		AT91_SMC_READMODE	(1 <<  0)			/* Read Mode */
-#define		AT91_SMC_WRITEMODE	(1 <<  1)			/* Write Mode */
-#define		AT91_SMC_EXNWMODE	(3 <<  4)			/* NWAIT Mode */
-#define			AT91_SMC_EXNWMODE_DISABLE	(0 << 4)
-#define			AT91_SMC_EXNWMODE_FROZEN	(2 << 4)
-#define			AT91_SMC_EXNWMODE_READY		(3 << 4)
-#define		AT91_SMC_BAT		(1 <<  8)			/* Byte Access Type */
-#define			AT91_SMC_BAT_SELECT		(0 << 8)
-#define			AT91_SMC_BAT_WRITE		(1 << 8)
-#define		AT91_SMC_DBW		(3 << 12)			/* Data Bus Width */
-#define			AT91_SMC_DBW_8			(0 << 12)
-#define			AT91_SMC_DBW_16			(1 << 12)
-#define			AT91_SMC_DBW_32			(2 << 12)
-#define		AT91_SMC_TDF		(0xf << 16)			/* Data Float Time. */
-#define			AT91_SMC_TDF_(x)		((x) << 16)
-#define		AT91_SMC_TDFMODE	(1 << 20)			/* TDF Optimization - Enabled */
-#define		AT91_SMC_PMEN		(1 << 24)			/* Page Mode Enabled */
-#define		AT91_SMC_PS		(3 << 28)			/* Page Size */
-#define			AT91_SMC_PS_4			(0 << 28)
-#define			AT91_SMC_PS_8			(1 << 28)
-#define			AT91_SMC_PS_16			(2 << 28)
-#define			AT91_SMC_PS_32			(3 << 28)
-
-#if defined(AT91_SMC1)		/* The AT91SAM9263 has 2 Static Memory contollers */
-#define AT91_SMC1_SETUP(n)	(AT91_SMC1 + 0x00 + ((n)*0x10))	/* Setup Register for CS n */
-#define AT91_SMC1_PULSE(n)	(AT91_SMC1 + 0x04 + ((n)*0x10))	/* Pulse Register for CS n */
-#define AT91_SMC1_CYCLE(n)	(AT91_SMC1 + 0x08 + ((n)*0x10))	/* Cycle Register for CS n */
-#define AT91_SMC1_MODE(n)	(AT91_SMC1 + 0x0c + ((n)*0x10))	/* Mode Register for CS n */
-#endif
-
-#endif
 #endif
diff --git a/arch/arm/include/asm/arch-at91/atmel_mpddrc.h b/arch/arm/include/asm/arch-at91/atmel_mpddrc.h
new file mode 100644
index 0000000000..5741f6e94a
--- /dev/null
+++ b/arch/arm/include/asm/arch-at91/atmel_mpddrc.h
@@ -0,0 +1,115 @@
+/*
+ * Copyright (C) 2013 Atmel Corporation
+ *		      Bo Shen <voice.shen@atmel.com>
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#ifndef __ATMEL_MPDDRC_H__
+#define __ATMEL_MPDDRC_H__
+
+/*
+ * Only define the needed register in mpddr
+ * If other register needed, will add them later
+ */
+struct atmel_mpddr {
+	u32 mr;
+	u32 rtr;
+	u32 cr;
+	u32 tpr0;
+	u32 tpr1;
+	u32 tpr2;
+	u32 reserved[2];
+	u32 md;
+};
+
+int ddr2_init(const unsigned int ram_address,
+	       const struct atmel_mpddr *mpddr);
+
+/* Bit field in mode register */
+#define ATMEL_MPDDRC_MR_MODE_NORMAL_CMD		0x0
+#define ATMEL_MPDDRC_MR_MODE_NOP_CMD		0x1
+#define ATMEL_MPDDRC_MR_MODE_PRCGALL_CMD	0x2
+#define ATMEL_MPDDRC_MR_MODE_LMR_CMD		0x3
+#define ATMEL_MPDDRC_MR_MODE_RFSH_CMD		0x4
+#define ATMEL_MPDDRC_MR_MODE_EXT_LMR_CMD	0x5
+#define ATMEL_MPDDRC_MR_MODE_DEEP_CMD		0x6
+#define ATMEL_MPDDRC_MR_MODE_LPDDR2_CMD		0x7
+
+/* Bit field in configuration register */
+#define ATMEL_MPDDRC_CR_NC_MASK			0x3
+#define ATMEL_MPDDRC_CR_NC_COL_9		0x0
+#define ATMEL_MPDDRC_CR_NC_COL_10		0x1
+#define ATMEL_MPDDRC_CR_NC_COL_11		0x2
+#define ATMEL_MPDDRC_CR_NC_COL_12		0x3
+#define ATMEL_MPDDRC_CR_NR_MASK			(0x3 << 2)
+#define ATMEL_MPDDRC_CR_NR_ROW_11		(0x0 << 2)
+#define ATMEL_MPDDRC_CR_NR_ROW_12		(0x1 << 2)
+#define ATMEL_MPDDRC_CR_NR_ROW_13		(0x2 << 2)
+#define ATMEL_MPDDRC_CR_NR_ROW_14		(0x3 << 2)
+#define ATMEL_MPDDRC_CR_CAS_MASK		(0x7 << 4)
+#define ATMEL_MPDDRC_CR_CAS_DDR_CAS2		(0x2 << 4)
+#define ATMEL_MPDDRC_CR_CAS_DDR_CAS3		(0x3 << 4)
+#define ATMEL_MPDDRC_CR_CAS_DDR_CAS4		(0x4 << 4)
+#define ATMEL_MPDDRC_CR_CAS_DDR_CAS5		(0x5 << 4)
+#define ATMEL_MPDDRC_CR_CAS_DDR_CAS6		(0x6 << 4)
+#define ATMEL_MPDDRC_CR_DLL_RESET_ENABLED	(0x1 << 7)
+#define ATMEL_MPDDRC_CR_DIC_DS			(0x1 << 8)
+#define ATMEL_MPDDRC_CR_DIS_DLL			(0x1 << 9)
+#define ATMEL_MPDDRC_CR_OCD_DEFAULT		(0x7 << 12)
+#define ATMEL_MPDDRC_CR_ENRDM_ON		(0x1 << 17)
+#define ATMEL_MPDDRC_CR_NB_8BANKS		(0x1 << 20)
+#define ATMEL_MPDDRC_CR_NDQS_DISABLED		(0x1 << 21)
+#define ATMEL_MPDDRC_CR_DECOD_INTERLEAVED	(0x1 << 22)
+#define ATMEL_MPDDRC_CR_UNAL_SUPPORTED		(0x1 << 23)
+
+/* Bit field in timing parameter 0 register */
+#define ATMEL_MPDDRC_TPR0_TRAS_OFFSET		0
+#define ATMEL_MPDDRC_TPR0_TRAS_MASK		0xf
+#define ATMEL_MPDDRC_TPR0_TRCD_OFFSET		4
+#define ATMEL_MPDDRC_TPR0_TRCD_MASK		0xf
+#define ATMEL_MPDDRC_TPR0_TWR_OFFSET		8
+#define ATMEL_MPDDRC_TPR0_TWR_MASK		0xf
+#define ATMEL_MPDDRC_TPR0_TRC_OFFSET		12
+#define ATMEL_MPDDRC_TPR0_TRC_MASK		0xf
+#define ATMEL_MPDDRC_TPR0_TRP_OFFSET		16
+#define ATMEL_MPDDRC_TPR0_TRP_MASK		0xf
+#define ATMEL_MPDDRC_TPR0_TRRD_OFFSET		20
+#define ATMEL_MPDDRC_TPR0_TRRD_MASK		0xf
+#define ATMEL_MPDDRC_TPR0_TWTR_OFFSET		24
+#define ATMEL_MPDDRC_TPR0_TWTR_MASK		0x7
+#define ATMEL_MPDDRC_TPR0_RDC_WRRD_OFFSET	27
+#define ATMEL_MPDDRC_TPR0_RDC_WRRD_MASK		0x1
+#define ATMEL_MPDDRC_TPR0_TMRD_OFFSET		28
+#define ATMEL_MPDDRC_TPR0_TMRD_MASK		0xf
+
+/* Bit field in timing parameter 1 register */
+#define ATMEL_MPDDRC_TPR1_TRFC_OFFSET		0
+#define ATMEL_MPDDRC_TPR1_TRFC_MASK		0x7f
+#define ATMEL_MPDDRC_TPR1_TXSNR_OFFSET		8
+#define ATMEL_MPDDRC_TPR1_TXSNR_MASK		0xff
+#define ATMEL_MPDDRC_TPR1_TXSRD_OFFSET		16
+#define ATMEL_MPDDRC_TPR1_TXSRD_MASK		0xff
+#define ATMEL_MPDDRC_TPR1_TXP_OFFSET		24
+#define ATMEL_MPDDRC_TPR1_TXP_MASK		0xf
+
+/* Bit field in timing parameter 2 register */
+#define ATMEL_MPDDRC_TPR2_TXARD_OFFSET		0
+#define ATMEL_MPDDRC_TPR2_TXARD_MASK		0xf
+#define ATMEL_MPDDRC_TPR2_TXARDS_OFFSET		4
+#define ATMEL_MPDDRC_TPR2_TXARDS_MASK		0xf
+#define ATMEL_MPDDRC_TPR2_TRPA_OFFSET		8
+#define ATMEL_MPDDRC_TPR2_TRPA_MASK		0xf
+#define ATMEL_MPDDRC_TPR2_TRTP_OFFSET		12
+#define ATMEL_MPDDRC_TPR2_TRTP_MASK		0x7
+#define ATMEL_MPDDRC_TPR2_TFAW_OFFSET		16
+#define ATMEL_MPDDRC_TPR2_TFAW_MASK		0xf
+
+/* Bit field in Memory Device Register */
+#define ATMEL_MPDDRC_MD_LPDDR_SDRAM	0x3
+#define ATMEL_MPDDRC_MD_DDR2_SDRAM	0x6
+#define ATMEL_MPDDRC_MD_DBW_MASK	(0x1 << 4)
+#define ATMEL_MPDDRC_MD_DBW_32_BITS	(0x0 << 4)
+#define ATMEL_MPDDRC_MD_DBW_16_BITS	(0x1 << 4)
+
+#endif
diff --git a/arch/arm/include/asm/arch-at91/gpio.h b/arch/arm/include/asm/arch-at91/gpio.h
index 0700427fa4..ff6142b8aa 100644
--- a/arch/arm/include/asm/arch-at91/gpio.h
+++ b/arch/arm/include/asm/arch-at91/gpio.h
@@ -16,7 +16,7 @@
 
 #ifdef CONFIG_ATMEL_LEGACY
 
-#define PIN_BASE		32
+#define PIN_BASE		0
 
 #define MAX_GPIO_BANKS		5
 
@@ -231,4 +231,26 @@ static inline unsigned pin_to_mask(unsigned pin)
 #define at91_set_gpio_value(x, y)	at91_set_pio_value(x, y)
 #define at91_get_gpio_value(x)		at91_get_pio_value(x)
 #endif
-#endif
+
+#define GPIO_PIOA_BASE  (0)
+#define GPIO_PIOB_BASE  (GPIO_PIOA_BASE + 32)
+#define GPIO_PIOC_BASE  (GPIO_PIOB_BASE + 32)
+#define GPIO_PIOD_BASE  (GPIO_PIOC_BASE + 32)
+#define GPIO_PIOE_BASE  (GPIO_PIOD_BASE + 32)
+#define GPIO_PIN_PA(x)  (GPIO_PIOA_BASE + (x))
+#define GPIO_PIN_PB(x)  (GPIO_PIOB_BASE + (x))
+#define GPIO_PIN_PC(x)  (GPIO_PIOC_BASE + (x))
+#define GPIO_PIN_PD(x)  (GPIO_PIOD_BASE + (x))
+#define GPIO_PIN_PE(x)  (GPIO_PIOE_BASE + (x))
+
+static inline unsigned at91_gpio_to_port(unsigned gpio)
+{
+	return gpio / 32;
+}
+
+static inline unsigned at91_gpio_to_pin(unsigned gpio)
+{
+	return gpio % 32;
+}
+
+#endif /* __ASM_ARCH_AT91_GPIO_H */
diff --git a/arch/arm/include/asm/arch-at91/sama5d3.h b/arch/arm/include/asm/arch-at91/sama5d3.h
index 123a627cca..6d936f47fa 100644
--- a/arch/arm/include/asm/arch-at91/sama5d3.h
+++ b/arch/arm/include/asm/arch-at91/sama5d3.h
@@ -79,6 +79,7 @@
 #define ARCH_EXID_SAMA5D33	0x00414300
 #define ARCH_EXID_SAMA5D34	0x00414301
 #define ARCH_EXID_SAMA5D35	0x00584300
+#define ARCH_EXID_SAMA5D36	0x00004301
 
 #define cpu_is_sama5d3()	(get_chip_id() == ARCH_ID_SAMA5D3)
 #define cpu_is_sama5d31()	(cpu_is_sama5d3() && \
@@ -89,6 +90,8 @@
 		(get_extension_chip_id() == ARCH_EXID_SAMA5D34))
 #define cpu_is_sama5d35()	(cpu_is_sama5d3() && \
 		(get_extension_chip_id() == ARCH_EXID_SAMA5D35))
+#define cpu_is_sama5d36()	(cpu_is_sama5d3() && \
+		(get_extension_chip_id() == ARCH_EXID_SAMA5D36))
 
 /*
  * User Peripherals physical base addresses.
diff --git a/arch/arm/include/asm/arch-at91/spl.h b/arch/arm/include/asm/arch-at91/spl.h
new file mode 100644
index 0000000000..68c5349601
--- /dev/null
+++ b/arch/arm/include/asm/arch-at91/spl.h
@@ -0,0 +1,20 @@
+/*
+ * Copyright (C) 2013 Atmel Corporation
+ *		      Bo Shen <voice.shen@atmel.com>
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#ifndef	_ASM_ARCH_SPL_H_
+#define	_ASM_ARCH_SPL_H_
+
+enum {
+	BOOT_DEVICE_NONE,
+#ifdef CONFIG_SYS_USE_MMC
+	BOOT_DEVICE_MMC1,
+	BOOT_DEVICE_MMC2,
+	BOOT_DEVICE_MMC2_2,
+#endif
+};
+
+#endif
diff --git a/arch/arm/include/asm/arch-davinci/hardware.h b/arch/arm/include/asm/arch-davinci/hardware.h
index 7aaf4bff85..27b1844ee6 100644
--- a/arch/arm/include/asm/arch-davinci/hardware.h
+++ b/arch/arm/include/asm/arch-davinci/hardware.h
@@ -478,8 +478,9 @@ struct davinci_syscfg_regs {
 	dv_reg	rsvd[13];
 	dv_reg	kick0;
 	dv_reg	kick1;
-	dv_reg	rsvd1[53];
+	dv_reg	rsvd1[52];
 	dv_reg	mstpri[3];
+	dv_reg  rsvd2;
 	dv_reg	pinmux[20];
 	dv_reg	suspsrc;
 	dv_reg	chipsig;
diff --git a/arch/arm/include/asm/arch-exynos/dwmmc.h b/arch/arm/include/asm/arch-exynos/dwmmc.h
index d1c5d4f26a..09d739dfca 100644
--- a/arch/arm/include/asm/arch-exynos/dwmmc.h
+++ b/arch/arm/include/asm/arch-exynos/dwmmc.h
@@ -6,10 +6,6 @@
  */
 
 #define DWMCI_CLKSEL		0x09C
-#define DWMCI_SHIFT_0		0x0
-#define DWMCI_SHIFT_1		0x1
-#define DWMCI_SHIFT_2		0x2
-#define DWMCI_SHIFT_3		0x3
 #define DWMCI_SET_SAMPLE_CLK(x)	(x)
 #define DWMCI_SET_DRV_CLK(x)	((x) << 16)
 #define DWMCI_SET_DIV_RATIO(x)	((x) << 24)
diff --git a/arch/arm/include/asm/arch-exynos/mmc.h b/arch/arm/include/asm/arch-exynos/mmc.h
index 98312d1c3c..98d6530b15 100644
--- a/arch/arm/include/asm/arch-exynos/mmc.h
+++ b/arch/arm/include/asm/arch-exynos/mmc.h
@@ -55,7 +55,7 @@
 
 int s5p_sdhci_init(u32 regbase, int index, int bus_width);
 
-static inline unsigned int s5p_mmc_init(int index, int bus_width)
+static inline int s5p_mmc_init(int index, int bus_width)
 {
 	unsigned int base = samsung_get_base_mmc() +
 				(S5P_MMC_DEV_OFFSET * index);
diff --git a/arch/arm/include/asm/arch-exynos/power.h b/arch/arm/include/asm/arch-exynos/power.h
index 8db18c545c..2bfee18eb7 100644
--- a/arch/arm/include/asm/arch-exynos/power.h
+++ b/arch/arm/include/asm/arch-exynos/power.h
@@ -16,7 +16,7 @@ struct exynos4_power {
 	unsigned int	gnss_rtc_out_ctrl;
 	unsigned char	res2[0x1ec];
 	unsigned int	system_power_down_ctrl;
-	unsigned char	res3[0x1];
+	unsigned int	res3;
 	unsigned int	system_power_down_option;
 	unsigned char	res4[0x1f4];
 	unsigned int	swreset;
diff --git a/arch/arm/include/asm/arch-exynos/spi.h b/arch/arm/include/asm/arch-exynos/spi.h
index 147c1a7304..0ba931b7e3 100644
--- a/arch/arm/include/asm/arch-exynos/spi.h
+++ b/arch/arm/include/asm/arch-exynos/spi.h
@@ -30,6 +30,7 @@ struct exynos_spi {
 #define EXYNOS_SPI_MAX_FREQ	50000000
 
 #define SPI_TIMEOUT_MS		10
+#define SF_READ_DATA_CMD	0x3
 
 /* SPI_CHCFG */
 #define SPI_CH_HS_EN		(1 << 6)
diff --git a/arch/arm/include/asm/arch-omap3/clock.h b/arch/arm/include/asm/arch-omap3/clock.h
index be669c156f..1912cc9a67 100644
--- a/arch/arm/include/asm/arch-omap3/clock.h
+++ b/arch/arm/include/asm/arch-omap3/clock.h
@@ -27,8 +27,6 @@
 #define ICK_DSS_ON	0x00000001
 #define FCK_CAM_ON	0x00000001
 #define ICK_CAM_ON	0x00000001
-#define FCK_PER_ON	0x0003ffff
-#define ICK_PER_ON	0x0003ffff
 
 /* Used to index into DPLL parameter tables */
 typedef struct {
diff --git a/arch/arm/include/asm/arch-omap3/omap3.h b/arch/arm/include/asm/arch-omap3/omap3.h
index 7fb549af54..65a5995020 100644
--- a/arch/arm/include/asm/arch-omap3/omap3.h
+++ b/arch/arm/include/asm/arch-omap3/omap3.h
@@ -55,6 +55,7 @@ struct control_prog_io {
 #define OMAP34XX_UART1			(OMAP34XX_L4_IO_BASE + 0x6a000)
 #define OMAP34XX_UART2			(OMAP34XX_L4_IO_BASE + 0x6c000)
 #define OMAP34XX_UART3			(OMAP34XX_L4_PER + 0x20000)
+#define OMAP34XX_UART4			(OMAP34XX_L4_PER + 0x42000)
 
 /* General Purpose Timers */
 #define OMAP34XX_GPT1			0x48318000
diff --git a/arch/arm/include/asm/arch-omap4/sys_proto.h b/arch/arm/include/asm/arch-omap4/sys_proto.h
index 39c531632e..ce8217f697 100644
--- a/arch/arm/include/asm/arch-omap4/sys_proto.h
+++ b/arch/arm/include/asm/arch-omap4/sys_proto.h
@@ -16,6 +16,10 @@
 
 DECLARE_GLOBAL_DATA_PTR;
 
+extern const struct emif_regs emif_regs_elpida_200_mhz_2cs;
+extern const struct emif_regs emif_regs_elpida_380_mhz_1cs;
+extern const struct emif_regs emif_regs_elpida_400_mhz_1cs;
+extern const struct emif_regs emif_regs_elpida_400_mhz_2cs;
 struct omap_sysinfo {
 	char *board_string;
 };
diff --git a/arch/arm/include/asm/arch-omap5/clock.h b/arch/arm/include/asm/arch-omap5/clock.h
index 8869b50017..2dfe4efb4b 100644
--- a/arch/arm/include/asm/arch-omap5/clock.h
+++ b/arch/arm/include/asm/arch-omap5/clock.h
@@ -137,6 +137,9 @@
 #define HSMMC_CLKCTRL_CLKSEL_MASK		(1 << 24)
 #define HSMMC_CLKCTRL_CLKSEL_DIV_MASK		(1 << 25)
 
+/* CM_L3INIT_SATA_CLKCTRL */
+#define SATA_CLKCTRL_OPTFCLKEN_MASK		(1 << 8)
+
 /* CM_WKUP_GPTIMER1_CLKCTRL */
 #define GPTIMER1_CLKCTRL_CLKSEL_MASK		(1 << 24)
 
diff --git a/arch/arm/include/asm/arch-omap5/omap.h b/arch/arm/include/asm/arch-omap5/omap.h
index 3c2306fe37..590235be09 100644
--- a/arch/arm/include/asm/arch-omap5/omap.h
+++ b/arch/arm/include/asm/arch-omap5/omap.h
@@ -64,6 +64,9 @@
 /* QSPI */
 #define QSPI_BASE		0x4B300000
 
+/* SATA */
+#define DWC_AHSATA_BASE		0x4A140000
+
 /*
  * Hardware Register Details
  */
@@ -239,6 +242,7 @@ struct ctrl_ioregs {
 	u32 ctrl_ddrio_1;
 	u32 ctrl_ddrio_2;
 	u32 ctrl_emif_sdram_config_ext;
+	u32 ctrl_emif_sdram_config_ext_final;
 	u32 ctrl_ddr_ctrl_ext_0;
 };
 
diff --git a/arch/arm/include/asm/arch-omap5/sata.h b/arch/arm/include/asm/arch-omap5/sata.h
new file mode 100644
index 0000000000..2ca8947730
--- /dev/null
+++ b/arch/arm/include/asm/arch-omap5/sata.h
@@ -0,0 +1,48 @@
+/*
+ * SATA Wrapper Register map
+ *
+ * (C) Copyright 2013
+ * Texas Instruments, <www.ti.com>
+ *
+ * SPDX-License-Identifier:     GPL-2.0+
+ */
+
+#ifndef _TI_SATA_H
+#define _TI_SATA_H
+
+/* SATA Wrapper module */
+#define TI_SATA_WRAPPER_BASE		(OMAP54XX_L4_CORE_BASE + 0x141100)
+/* SATA PHY Module */
+#define TI_SATA_PLLCTRL_BASE		(OMAP54XX_L4_CORE_BASE + 0x96800)
+
+/* SATA Wrapper register offsets */
+#define TI_SATA_SYSCONFIG			0x00
+#define TI_SATA_CDRLOCK				0x04
+
+/* Register Set */
+#define TI_SATA_SYSCONFIG_OVERRIDE0		(1 << 16)
+#define TI_SATA_SYSCONFIG_STANDBY_MASK		(0x3 << 4)
+#define TI_SATA_SYSCONFIG_IDLE_MASK		(0x3 << 2)
+
+/* Standby modes */
+#define TI_SATA_STANDBY_FORCE			0x0
+#define TI_SATA_STANDBY_NO			(0x1 << 4)
+#define TI_SATA_STANDBY_SMART_WAKE		(0x3 << 4)
+#define TI_SATA_STANDBY_SMART			(0x2 << 4)
+
+/* Idle modes */
+#define TI_SATA_IDLE_FORCE			0x0
+#define TI_SATA_IDLE_NO				(0x1 << 2)
+#define TI_SATA_IDLE_SMART_WAKE			(0x3 << 2)
+#define TI_SATA_IDLE_SMART			(0x2 << 2)
+
+#ifdef CONFIG_SCSI_AHCI_PLAT
+int omap_sata_init(void);
+#else
+static inline int omap_sata_init(void)
+{
+	return 0;
+}
+#endif /* CONFIG_SCSI_AHCI_PLAT */
+
+#endif /* _TI_SATA_H */
diff --git a/arch/arm/include/asm/arch-rmobile/gpio.h b/arch/arm/include/asm/arch-rmobile/gpio.h
index 6b5e4ed4eb..560e9f42d9 100644
--- a/arch/arm/include/asm/arch-rmobile/gpio.h
+++ b/arch/arm/include/asm/arch-rmobile/gpio.h
@@ -7,6 +7,12 @@ void sh73a0_pinmux_init(void);
 #elif defined(CONFIG_R8A7740)
 #include "r8a7740-gpio.h"
 void r8a7740_pinmux_init(void);
+#elif defined(CONFIG_R8A7790)
+#include "r8a7790-gpio.h"
+void r8a7790_pinmux_init(void);
+#elif defined(CONFIG_R8A7791)
+#include "r8a7791-gpio.h"
+void r8a7791_pinmux_init(void);
 #endif
 
 #endif /* __ASM_ARCH_GPIO_H */
diff --git a/arch/arm/include/asm/arch-rmobile/r8a7790-gpio.h b/arch/arm/include/asm/arch-rmobile/r8a7790-gpio.h
new file mode 100644
index 0000000000..444e361c06
--- /dev/null
+++ b/arch/arm/include/asm/arch-rmobile/r8a7790-gpio.h
@@ -0,0 +1,387 @@
+#ifndef __ASM_R8A7790_H__
+#define __ASM_R8A7790_H__
+
+/* Pin Function Controller:
+ * GPIO_FN_xx - GPIO used to select pin function
+ * GPIO_GP_x_x - GPIO mapped to real I/O pin on CPU
+ */
+enum {
+	GPIO_GP_0_0, GPIO_GP_0_1, GPIO_GP_0_2, GPIO_GP_0_3,
+	GPIO_GP_0_4, GPIO_GP_0_5, GPIO_GP_0_6, GPIO_GP_0_7,
+	GPIO_GP_0_8, GPIO_GP_0_9, GPIO_GP_0_10, GPIO_GP_0_11,
+	GPIO_GP_0_12, GPIO_GP_0_13, GPIO_GP_0_14, GPIO_GP_0_15,
+	GPIO_GP_0_16, GPIO_GP_0_17, GPIO_GP_0_18, GPIO_GP_0_19,
+	GPIO_GP_0_20, GPIO_GP_0_21, GPIO_GP_0_22, GPIO_GP_0_23,
+	GPIO_GP_0_24, GPIO_GP_0_25, GPIO_GP_0_26, GPIO_GP_0_27,
+	GPIO_GP_0_28, GPIO_GP_0_29, GPIO_GP_0_30, GPIO_GP_0_31,
+
+	GPIO_GP_1_0, GPIO_GP_1_1, GPIO_GP_1_2, GPIO_GP_1_3,
+	GPIO_GP_1_4, GPIO_GP_1_5, GPIO_GP_1_6, GPIO_GP_1_7,
+	GPIO_GP_1_8, GPIO_GP_1_9, GPIO_GP_1_10, GPIO_GP_1_11,
+	GPIO_GP_1_12, GPIO_GP_1_13, GPIO_GP_1_14, GPIO_GP_1_15,
+	GPIO_GP_1_16, GPIO_GP_1_17, GPIO_GP_1_18, GPIO_GP_1_19,
+	GPIO_GP_1_20, GPIO_GP_1_21, GPIO_GP_1_22, GPIO_GP_1_23,
+	GPIO_GP_1_24, GPIO_GP_1_25, GPIO_GP_1_26, GPIO_GP_1_27,
+	GPIO_GP_1_28, GPIO_GP_1_29,
+
+	GPIO_GP_2_0, GPIO_GP_2_1, GPIO_GP_2_2, GPIO_GP_2_3,
+	GPIO_GP_2_4, GPIO_GP_2_5, GPIO_GP_2_6, GPIO_GP_2_7,
+	GPIO_GP_2_8, GPIO_GP_2_9, GPIO_GP_2_10, GPIO_GP_2_11,
+	GPIO_GP_2_12, GPIO_GP_2_13, GPIO_GP_2_14, GPIO_GP_2_15,
+	GPIO_GP_2_16, GPIO_GP_2_17, GPIO_GP_2_18, GPIO_GP_2_19,
+	GPIO_GP_2_20, GPIO_GP_2_21, GPIO_GP_2_22, GPIO_GP_2_23,
+	GPIO_GP_2_24, GPIO_GP_2_25, GPIO_GP_2_26, GPIO_GP_2_27,
+	GPIO_GP_2_28, GPIO_GP_2_29,
+
+	GPIO_GP_3_0, GPIO_GP_3_1, GPIO_GP_3_2, GPIO_GP_3_3,
+	GPIO_GP_3_4, GPIO_GP_3_5, GPIO_GP_3_6, GPIO_GP_3_7,
+	GPIO_GP_3_8, GPIO_GP_3_9, GPIO_GP_3_10, GPIO_GP_3_11,
+	GPIO_GP_3_12, GPIO_GP_3_13, GPIO_GP_3_14, GPIO_GP_3_15,
+	GPIO_GP_3_16, GPIO_GP_3_17, GPIO_GP_3_18, GPIO_GP_3_19,
+	GPIO_GP_3_20, GPIO_GP_3_21, GPIO_GP_3_22, GPIO_GP_3_23,
+	GPIO_GP_3_24, GPIO_GP_3_25, GPIO_GP_3_26, GPIO_GP_3_27,
+	GPIO_GP_3_28, GPIO_GP_3_29, GPIO_GP_3_30, GPIO_GP_3_31,
+
+	GPIO_GP_4_0, GPIO_GP_4_1, GPIO_GP_4_2, GPIO_GP_4_3,
+	GPIO_GP_4_4, GPIO_GP_4_5, GPIO_GP_4_6, GPIO_GP_4_7,
+	GPIO_GP_4_8, GPIO_GP_4_9, GPIO_GP_4_10, GPIO_GP_4_11,
+	GPIO_GP_4_12, GPIO_GP_4_13, GPIO_GP_4_14, GPIO_GP_4_15,
+	GPIO_GP_4_16, GPIO_GP_4_17, GPIO_GP_4_18, GPIO_GP_4_19,
+	GPIO_GP_4_20, GPIO_GP_4_21, GPIO_GP_4_22, GPIO_GP_4_23,
+	GPIO_GP_4_24, GPIO_GP_4_25, GPIO_GP_4_26, GPIO_GP_4_27,
+	GPIO_GP_4_28, GPIO_GP_4_29, GPIO_GP_4_30, GPIO_GP_4_31,
+
+	GPIO_GP_5_0, GPIO_GP_5_1, GPIO_GP_5_2, GPIO_GP_5_3,
+	GPIO_GP_5_4, GPIO_GP_5_5, GPIO_GP_5_6, GPIO_GP_5_7,
+	GPIO_GP_5_8, GPIO_GP_5_9, GPIO_GP_5_10, GPIO_GP_5_11,
+	GPIO_GP_5_12, GPIO_GP_5_13, GPIO_GP_5_14, GPIO_GP_5_15,
+	GPIO_GP_5_16, GPIO_GP_5_17, GPIO_GP_5_18, GPIO_GP_5_19,
+	GPIO_GP_5_20, GPIO_GP_5_21, GPIO_GP_5_22, GPIO_GP_5_23,
+	GPIO_GP_5_24, GPIO_GP_5_25, GPIO_GP_5_26, GPIO_GP_5_27,
+	GPIO_GP_5_28, GPIO_GP_5_29, GPIO_GP_5_30, GPIO_GP_5_31,
+
+	GPIO_FN_VI1_DATA7_VI1_B7, GPIO_FN_USB0_PWEN, GPIO_FN_USB0_OVC_VBUS,
+	GPIO_FN_USB2_PWEN, GPIO_FN_USB2_OVC, GPIO_FN_AVS1, GPIO_FN_AVS2,
+	GPIO_FN_DU_DOTCLKIN0, GPIO_FN_DU_DOTCLKIN2,
+
+	/* IPSR0 */
+	GPIO_FN_D1, GPIO_FN_MSIOF3_SYNC_B, GPIO_FN_VI3_DATA1, GPIO_FN_VI0_G5,
+	GPIO_FN_VI0_G5_B, GPIO_FN_D2, GPIO_FN_MSIOF3_RXD_B, GPIO_FN_VI3_DATA2,
+	GPIO_FN_VI0_G6, GPIO_FN_VI0_G6_B, GPIO_FN_D3, GPIO_FN_MSIOF3_TXD_B,
+	GPIO_FN_VI3_DATA3, GPIO_FN_VI0_G7, GPIO_FN_VI0_G7_B, GPIO_FN_D4,
+	GPIO_FN_SCIFB1_RXD_F, GPIO_FN_SCIFB0_RXD_C, GPIO_FN_VI3_DATA4,
+	GPIO_FN_VI0_R0, GPIO_FN_VI0_R0_B, GPIO_FN_RX0_B, GPIO_FN_D5,
+	GPIO_FN_SCIFB1_TXD_F, GPIO_FN_SCIFB0_TXD_C, GPIO_FN_VI3_DATA5,
+	GPIO_FN_VI0_R1, GPIO_FN_VI0_R1_B, GPIO_FN_TX0_B, GPIO_FN_D6,
+	GPIO_FN_SCL2_C, GPIO_FN_VI3_DATA6, GPIO_FN_VI0_R2, GPIO_FN_VI0_R2_B,
+	GPIO_FN_SCL2_CIS_C, GPIO_FN_D7, GPIO_FN_AD_DI_B, GPIO_FN_SDA2_C,
+	GPIO_FN_VI3_DATA7, GPIO_FN_VI0_R3, GPIO_FN_VI0_R3_B, GPIO_FN_SDA2_CIS_C,
+	GPIO_FN_D8, GPIO_FN_SCIFA1_SCK_C, GPIO_FN_AVB_TXD0, GPIO_FN_MII_TXD0,
+	GPIO_FN_VI0_G0, GPIO_FN_VI0_G0_B, GPIO_FN_VI2_DATA0_VI2_B0,
+
+	/* IPSR1 */
+	GPIO_FN_D9, GPIO_FN_SCIFA1_RXD_C, GPIO_FN_AVB_TXD1, GPIO_FN_MII_TXD1,
+	GPIO_FN_VI0_G1, GPIO_FN_VI0_G1_B, GPIO_FN_VI2_DATA1_VI2_B1, GPIO_FN_D10,
+	GPIO_FN_SCIFA1_TXD_C, GPIO_FN_AVB_TXD2, GPIO_FN_MII_TXD2,
+	GPIO_FN_VI0_G2, GPIO_FN_VI0_G2_B, GPIO_FN_VI2_DATA2_VI2_B2, GPIO_FN_D11,
+	GPIO_FN_SCIFA1_CTS_N_C, GPIO_FN_AVB_TXD3, GPIO_FN_MII_TXD3,
+	GPIO_FN_VI0_G3, GPIO_FN_VI0_G3_B, GPIO_FN_VI2_DATA3_VI2_B3,
+	GPIO_FN_D12, GPIO_FN_SCIFA1_RTS_N_C, GPIO_FN_AVB_TXD4,
+	GPIO_FN_VI0_HSYNC_N, GPIO_FN_VI0_HSYNC_N_B, GPIO_FN_VI2_DATA4_VI2_B4,
+	GPIO_FN_D13, GPIO_FN_AVB_TXD5, GPIO_FN_VI0_VSYNC_N,
+	GPIO_FN_VI0_VSYNC_N_B, GPIO_FN_VI2_DATA5_VI2_B5, GPIO_FN_D14,
+	GPIO_FN_SCIFB1_RXD_C, GPIO_FN_AVB_TXD6, GPIO_FN_RX1_B,
+	GPIO_FN_VI0_CLKENB, GPIO_FN_VI0_CLKENB_B, GPIO_FN_VI2_DATA6_VI2_B6,
+	GPIO_FN_D15, GPIO_FN_SCIFB1_TXD_C, GPIO_FN_AVB_TXD7, GPIO_FN_TX1_B,
+	GPIO_FN_VI0_FIELD, GPIO_FN_VI0_FIELD_B, GPIO_FN_VI2_DATA7_VI2_B7,
+	GPIO_FN_A0, GPIO_FN_PWM3, GPIO_FN_A1, GPIO_FN_PWM4,
+
+	/* IPSR2 */
+	GPIO_FN_A2, GPIO_FN_PWM5, GPIO_FN_MSIOF1_SS1_B, GPIO_FN_A3,
+	GPIO_FN_PWM6, GPIO_FN_MSIOF1_SS2_B, GPIO_FN_A4, GPIO_FN_MSIOF1_TXD_B,
+	GPIO_FN_TPU0TO0, GPIO_FN_A5, GPIO_FN_SCIFA1_TXD_B, GPIO_FN_TPU0TO1,
+	GPIO_FN_A6, GPIO_FN_SCIFA1_RTS_N_B, GPIO_FN_TPU0TO2, GPIO_FN_A7,
+	GPIO_FN_SCIFA1_SCK_B, GPIO_FN_AUDIO_CLKOUT_B, GPIO_FN_TPU0TO3,
+	GPIO_FN_A8, GPIO_FN_SCIFA1_RXD_B, GPIO_FN_SSI_SCK5_B, GPIO_FN_VI0_R4,
+	GPIO_FN_VI0_R4_B, GPIO_FN_SCIFB2_RXD_C, GPIO_FN_VI2_DATA0_VI2_B0_B,
+	GPIO_FN_A9, GPIO_FN_SCIFA1_CTS_N_B, GPIO_FN_SSI_WS5_B, GPIO_FN_VI0_R5,
+	GPIO_FN_VI0_R5_B, GPIO_FN_SCIFB2_TXD_C, GPIO_FN_VI2_DATA1_VI2_B1_B,
+	GPIO_FN_A10, GPIO_FN_SSI_SDATA5_B, GPIO_FN_MSIOF2_SYNC, GPIO_FN_VI0_R6,
+	GPIO_FN_VI0_R6_B, GPIO_FN_VI2_DATA2_VI2_B2_B,
+
+	/* IPSR3 */
+	GPIO_FN_A11, GPIO_FN_SCIFB2_CTS_N_B, GPIO_FN_MSIOF2_SCK, GPIO_FN_VI1_R0,
+	GPIO_FN_VI1_R0_B, GPIO_FN_VI2_G0, GPIO_FN_VI2_DATA3_VI2_B3_B,
+	GPIO_FN_A12, GPIO_FN_SCIFB2_RXD_B, GPIO_FN_MSIOF2_TXD, GPIO_FN_VI1_R1,
+	GPIO_FN_VI1_R1_B, GPIO_FN_VI2_G1, GPIO_FN_VI2_DATA4_VI2_B4_B,
+	GPIO_FN_A13, GPIO_FN_SCIFB2_RTS_N_B, GPIO_FN_EX_WAIT2,
+	GPIO_FN_MSIOF2_RXD, GPIO_FN_VI1_R2, GPIO_FN_VI1_R2_B, GPIO_FN_VI2_G2,
+	GPIO_FN_VI2_DATA5_VI2_B5_B, GPIO_FN_A14, GPIO_FN_SCIFB2_TXD_B,
+	GPIO_FN_ATACS11_N, GPIO_FN_MSIOF2_SS1, GPIO_FN_A15,
+	GPIO_FN_SCIFB2_SCK_B, GPIO_FN_ATARD1_N, GPIO_FN_MSIOF2_SS2, GPIO_FN_A16,
+	GPIO_FN_ATAWR1_N, GPIO_FN_A17, GPIO_FN_AD_DO_B, GPIO_FN_ATADIR1_N,
+	GPIO_FN_A18, GPIO_FN_AD_CLK_B, GPIO_FN_ATAG1_N, GPIO_FN_A19,
+	GPIO_FN_AD_NCS_N_B, GPIO_FN_ATACS01_N, GPIO_FN_EX_WAIT0_B, GPIO_FN_A20,
+	GPIO_FN_SPCLK, GPIO_FN_VI1_R3, GPIO_FN_VI1_R3_B, GPIO_FN_VI2_G4,
+
+	/* IPSR4 */
+	GPIO_FN_A21, GPIO_FN_MOSI_IO0, GPIO_FN_VI1_R4, GPIO_FN_VI1_R4_B,
+	GPIO_FN_VI2_G5, GPIO_FN_A22, GPIO_FN_MISO_IO1, GPIO_FN_VI1_R5,
+	GPIO_FN_VI1_R5_B, GPIO_FN_VI2_G6, GPIO_FN_A23, GPIO_FN_IO2,
+	GPIO_FN_VI1_G7, GPIO_FN_VI1_G7_B, GPIO_FN_VI2_G7, GPIO_FN_A24,
+	GPIO_FN_IO3, GPIO_FN_VI1_R7, GPIO_FN_VI1_R7_B, GPIO_FN_VI2_CLKENB,
+	GPIO_FN_VI2_CLKENB_B, GPIO_FN_A25, GPIO_FN_SSL, GPIO_FN_VI1_G6,
+	GPIO_FN_VI1_G6_B, GPIO_FN_VI2_FIELD, GPIO_FN_VI2_FIELD_B, GPIO_FN_CS0_N,
+	GPIO_FN_VI1_R6, GPIO_FN_VI1_R6_B, GPIO_FN_VI2_G3, GPIO_FN_MSIOF0_SS2_B,
+	GPIO_FN_CS1_N_A26, GPIO_FN_SPEEDIN, GPIO_FN_VI0_R7, GPIO_FN_VI0_R7_B,
+	GPIO_FN_VI2_CLK, GPIO_FN_VI2_CLK_B, GPIO_FN_EX_CS0_N, GPIO_FN_HRX1_B,
+	GPIO_FN_VI1_G5, GPIO_FN_VI1_G5_B, GPIO_FN_VI2_R0, GPIO_FN_HTX0_B,
+	GPIO_FN_MSIOF0_SS1_B, GPIO_FN_EX_CS1_N, GPIO_FN_GPS_CLK,
+	GPIO_FN_HCTS1_N_B, GPIO_FN_VI1_FIELD, GPIO_FN_VI1_FIELD_B,
+	GPIO_FN_VI2_R1, GPIO_FN_EX_CS2_N, GPIO_FN_GPS_SIGN, GPIO_FN_HRTS1_N_B,
+	GPIO_FN_VI3_CLKENB, GPIO_FN_VI1_G0, GPIO_FN_VI1_G0_B, GPIO_FN_VI2_R2,
+
+	/* IPSR5 */
+	GPIO_FN_EX_CS3_N, GPIO_FN_GPS_MAG, GPIO_FN_VI3_FIELD, GPIO_FN_VI1_G1,
+	GPIO_FN_VI1_G1_B, GPIO_FN_VI2_R3, GPIO_FN_EX_CS4_N,
+	GPIO_FN_MSIOF1_SCK_B, GPIO_FN_VI3_HSYNC_N,
+	GPIO_FN_VI2_HSYNC_N, GPIO_FN_SCL1, GPIO_FN_VI2_HSYNC_N_B,
+	GPIO_FN_INTC_EN0_N, GPIO_FN_SCL1_CIS, GPIO_FN_EX_CS5_N, GPIO_FN_CAN0_RX,
+	GPIO_FN_MSIOF1_RXD_B, GPIO_FN_VI3_VSYNC_N, GPIO_FN_VI1_G2,
+	GPIO_FN_VI1_G2_B, GPIO_FN_VI2_R4, GPIO_FN_SDA1, GPIO_FN_INTC_EN1_N,
+	GPIO_FN_SDA1_CIS, GPIO_FN_BS_N, GPIO_FN_IETX, GPIO_FN_HTX1_B,
+	GPIO_FN_CAN1_TX, GPIO_FN_DRACK0, GPIO_FN_IETX_C, GPIO_FN_RD_N,
+	GPIO_FN_CAN0_TX, GPIO_FN_SCIFA0_SCK_B, GPIO_FN_RD_WR_N, GPIO_FN_VI1_G3,
+	GPIO_FN_VI1_G3_B, GPIO_FN_VI2_R5, GPIO_FN_SCIFA0_RXD_B,
+	GPIO_FN_INTC_IRQ4_N, GPIO_FN_WE0_N, GPIO_FN_IECLK, GPIO_FN_CAN_CLK,
+	GPIO_FN_VI2_VSYNC_N, GPIO_FN_SCIFA0_TXD_B, GPIO_FN_VI2_VSYNC_N_B,
+	GPIO_FN_WE1_N, GPIO_FN_IERX, GPIO_FN_CAN1_RX, GPIO_FN_VI1_G4,
+	GPIO_FN_VI1_G4_B, GPIO_FN_VI2_R6, GPIO_FN_SCIFA0_CTS_N_B,
+	GPIO_FN_IERX_C, GPIO_FN_EX_WAIT0, GPIO_FN_IRQ3, GPIO_FN_INTC_IRQ3_N,
+	GPIO_FN_VI3_CLK, GPIO_FN_SCIFA0_RTS_N_B, GPIO_FN_HRX0_B,
+	GPIO_FN_MSIOF0_SCK_B, GPIO_FN_DREQ0_N, GPIO_FN_VI1_HSYNC_N,
+	GPIO_FN_VI1_HSYNC_N_B, GPIO_FN_VI2_R7, GPIO_FN_SSI_SCK78_C,
+	GPIO_FN_SSI_WS78_B,
+
+	/* IPSR6 */
+	GPIO_FN_DACK0, GPIO_FN_IRQ0, GPIO_FN_INTC_IRQ0_N, GPIO_FN_SSI_SCK6_B,
+	GPIO_FN_VI1_VSYNC_N, GPIO_FN_VI1_VSYNC_N_B, GPIO_FN_SSI_WS78_C,
+	GPIO_FN_DREQ1_N, GPIO_FN_VI1_CLKENB, GPIO_FN_VI1_CLKENB_B,
+	GPIO_FN_SSI_SDATA7_C, GPIO_FN_SSI_SCK78_B, GPIO_FN_DACK1, GPIO_FN_IRQ1,
+	GPIO_FN_INTC_IRQ1_N, GPIO_FN_SSI_WS6_B, GPIO_FN_SSI_SDATA8_C,
+	GPIO_FN_DREQ2_N, GPIO_FN_HSCK1_B, GPIO_FN_HCTS0_N_B,
+	GPIO_FN_MSIOF0_TXD_B, GPIO_FN_DACK2, GPIO_FN_IRQ2, GPIO_FN_INTC_IRQ2_N,
+	GPIO_FN_SSI_SDATA6_B, GPIO_FN_HRTS0_N_B, GPIO_FN_MSIOF0_RXD_B,
+	GPIO_FN_ETH_CRS_DV, GPIO_FN_RMII_CRS_DV, GPIO_FN_STP_ISCLK_0_B,
+	GPIO_FN_TS_SDEN0_D, GPIO_FN_GLO_Q0_C, GPIO_FN_SCL2_E,
+	GPIO_FN_SCL2_CIS_E, GPIO_FN_ETH_RX_ER, GPIO_FN_RMII_RX_ER,
+	GPIO_FN_STP_ISD_0_B, GPIO_FN_TS_SPSYNC0_D, GPIO_FN_GLO_Q1_C,
+	GPIO_FN_SDA2_E, GPIO_FN_SDA2_CIS_E, GPIO_FN_ETH_RXD0, GPIO_FN_RMII_RXD0,
+	GPIO_FN_STP_ISEN_0_B, GPIO_FN_TS_SDAT0_D, GPIO_FN_GLO_I0_C,
+	GPIO_FN_SCIFB1_SCK_G, GPIO_FN_SCK1_E, GPIO_FN_ETH_RXD1,
+	GPIO_FN_RMII_RXD1, GPIO_FN_HRX0_E, GPIO_FN_STP_ISSYNC_0_B,
+	GPIO_FN_TS_SCK0_D, GPIO_FN_GLO_I1_C, GPIO_FN_SCIFB1_RXD_G,
+	GPIO_FN_RX1_E, GPIO_FN_ETH_LINK, GPIO_FN_RMII_LINK, GPIO_FN_HTX0_E,
+	GPIO_FN_STP_IVCXO27_0_B, GPIO_FN_SCIFB1_TXD_G, GPIO_FN_TX1_E,
+	GPIO_FN_ETH_REF_CLK, GPIO_FN_RMII_REF_CLK, GPIO_FN_HCTS0_N_E,
+	GPIO_FN_STP_IVCXO27_1_B, GPIO_FN_HRX0_F,
+
+	/* IPSR7 */
+	GPIO_FN_ETH_MDIO, GPIO_FN_RMII_MDIO, GPIO_FN_HRTS0_N_E,
+	GPIO_FN_SIM0_D_C, GPIO_FN_HCTS0_N_F, GPIO_FN_ETH_TXD1,
+	GPIO_FN_RMII_TXD1, GPIO_FN_HTX0_F, GPIO_FN_BPFCLK_G, GPIO_FN_RDS_CLK_F,
+	GPIO_FN_ETH_TX_EN, GPIO_FN_RMII_TX_EN, GPIO_FN_SIM0_CLK_C,
+	GPIO_FN_HRTS0_N_F, GPIO_FN_ETH_MAGIC, GPIO_FN_RMII_MAGIC,
+	GPIO_FN_SIM0_RST_C, GPIO_FN_ETH_TXD0, GPIO_FN_RMII_TXD0,
+	GPIO_FN_STP_ISCLK_1_B, GPIO_FN_TS_SDEN1_C, GPIO_FN_GLO_SCLK_C,
+	GPIO_FN_ETH_MDC, GPIO_FN_RMII_MDC, GPIO_FN_STP_ISD_1_B,
+	GPIO_FN_TS_SPSYNC1_C, GPIO_FN_GLO_SDATA_C, GPIO_FN_PWM0,
+	GPIO_FN_SCIFA2_SCK_C, GPIO_FN_STP_ISEN_1_B, GPIO_FN_TS_SDAT1_C,
+	GPIO_FN_GLO_SS_C, GPIO_FN_PWM1, GPIO_FN_SCIFA2_TXD_C,
+	GPIO_FN_STP_ISSYNC_1_B, GPIO_FN_TS_SCK1_C, GPIO_FN_GLO_RFON_C,
+	GPIO_FN_PCMOE_N, GPIO_FN_PWM2, GPIO_FN_PWMFSW0, GPIO_FN_SCIFA2_RXD_C,
+	GPIO_FN_PCMWE_N, GPIO_FN_IECLK_C, GPIO_FN_DU1_DOTCLKIN,
+	GPIO_FN_AUDIO_CLKC, GPIO_FN_AUDIO_CLKOUT_C, GPIO_FN_VI0_CLK,
+	GPIO_FN_ATACS00_N, GPIO_FN_AVB_RXD1, GPIO_FN_MII_RXD1,
+	GPIO_FN_VI0_DATA0_VI0_B0, GPIO_FN_ATACS10_N, GPIO_FN_AVB_RXD2,
+	GPIO_FN_MII_RXD2,
+
+	/* IPSR8 */
+	GPIO_FN_VI0_DATA1_VI0_B1, GPIO_FN_ATARD0_N, GPIO_FN_AVB_RXD3,
+	GPIO_FN_MII_RXD3, GPIO_FN_VI0_DATA2_VI0_B2, GPIO_FN_ATAWR0_N,
+	GPIO_FN_AVB_RXD4, GPIO_FN_VI0_DATA3_VI0_B3, GPIO_FN_ATADIR0_N,
+	GPIO_FN_AVB_RXD5, GPIO_FN_VI0_DATA4_VI0_B4, GPIO_FN_ATAG0_N,
+	GPIO_FN_AVB_RXD6, GPIO_FN_VI0_DATA5_VI0_B5, GPIO_FN_EX_WAIT1,
+	GPIO_FN_AVB_RXD7, GPIO_FN_VI0_DATA6_VI0_B6, GPIO_FN_AVB_RX_ER,
+	GPIO_FN_MII_RX_ER, GPIO_FN_VI0_DATA7_VI0_B7, GPIO_FN_AVB_RX_CLK,
+	GPIO_FN_MII_RX_CLK, GPIO_FN_VI1_CLK, GPIO_FN_AVB_RX_DV,
+	GPIO_FN_MII_RX_DV, GPIO_FN_VI1_DATA0_VI1_B0, GPIO_FN_SCIFA1_SCK_D,
+	GPIO_FN_AVB_CRS, GPIO_FN_MII_CRS, GPIO_FN_VI1_DATA1_VI1_B1,
+	GPIO_FN_SCIFA1_RXD_D, GPIO_FN_AVB_MDC, GPIO_FN_MII_MDC,
+	GPIO_FN_VI1_DATA2_VI1_B2, GPIO_FN_SCIFA1_TXD_D, GPIO_FN_AVB_MDIO,
+	GPIO_FN_MII_MDIO, GPIO_FN_VI1_DATA3_VI1_B3, GPIO_FN_SCIFA1_CTS_N_D,
+	GPIO_FN_AVB_GTX_CLK, GPIO_FN_VI1_DATA4_VI1_B4, GPIO_FN_SCIFA1_RTS_N_D,
+	GPIO_FN_AVB_MAGIC, GPIO_FN_MII_MAGIC, GPIO_FN_VI1_DATA5_VI1_B5,
+	GPIO_FN_AVB_PHY_INT, GPIO_FN_VI1_DATA6_VI1_B6, GPIO_FN_AVB_GTXREFCLK,
+	GPIO_FN_SD0_CLK, GPIO_FN_VI1_DATA0_VI1_B0_B, GPIO_FN_SD0_CMD,
+	GPIO_FN_SCIFB1_SCK_B, GPIO_FN_VI1_DATA1_VI1_B1_B,
+
+	/* IPSR9 */
+	GPIO_FN_SD0_DAT0, GPIO_FN_SCIFB1_RXD_B, GPIO_FN_VI1_DATA2_VI1_B2_B,
+	GPIO_FN_SD0_DAT1, GPIO_FN_SCIFB1_TXD_B, GPIO_FN_VI1_DATA3_VI1_B3_B,
+	GPIO_FN_SD0_DAT2, GPIO_FN_SCIFB1_CTS_N_B, GPIO_FN_VI1_DATA4_VI1_B4_B,
+	GPIO_FN_SD0_DAT3, GPIO_FN_SCIFB1_RTS_N_B, GPIO_FN_VI1_DATA5_VI1_B5_B,
+	GPIO_FN_SD0_CD, GPIO_FN_MMC0_D6, GPIO_FN_TS_SDEN0_B, GPIO_FN_USB0_EXTP,
+	GPIO_FN_GLO_SCLK, GPIO_FN_VI1_DATA6_VI1_B6_B, GPIO_FN_SCL1_B,
+	GPIO_FN_SCL1_CIS_B, GPIO_FN_VI2_DATA6_VI2_B6_B, GPIO_FN_SD0_WP,
+	GPIO_FN_MMC0_D7, GPIO_FN_TS_SPSYNC0_B, GPIO_FN_USB0_IDIN,
+	GPIO_FN_GLO_SDATA, GPIO_FN_VI1_DATA7_VI1_B7_B, GPIO_FN_SDA1_B,
+	GPIO_FN_SDA1_CIS_B, GPIO_FN_VI2_DATA7_VI2_B7_B, GPIO_FN_SD1_CLK,
+	GPIO_FN_AVB_TX_EN, GPIO_FN_MII_TX_EN, GPIO_FN_SD1_CMD,
+	GPIO_FN_AVB_TX_ER, GPIO_FN_MII_TX_ER, GPIO_FN_SCIFB0_SCK_B,
+	GPIO_FN_SD1_DAT0, GPIO_FN_AVB_TX_CLK, GPIO_FN_MII_TX_CLK,
+	GPIO_FN_SCIFB0_RXD_B, GPIO_FN_SD1_DAT1, GPIO_FN_AVB_LINK,
+	GPIO_FN_MII_LINK, GPIO_FN_SCIFB0_TXD_B, GPIO_FN_SD1_DAT2,
+	GPIO_FN_AVB_COL, GPIO_FN_MII_COL, GPIO_FN_SCIFB0_CTS_N_B,
+	GPIO_FN_SD1_DAT3, GPIO_FN_AVB_RXD0, GPIO_FN_MII_RXD0,
+	GPIO_FN_SCIFB0_RTS_N_B, GPIO_FN_SD1_CD, GPIO_FN_MMC1_D6,
+	GPIO_FN_TS_SDEN1, GPIO_FN_USB1_EXTP, GPIO_FN_GLO_SS, GPIO_FN_VI0_CLK_B,
+	GPIO_FN_SCL2_D, GPIO_FN_SCL2_CIS_D, GPIO_FN_SIM0_CLK_B,
+	GPIO_FN_VI3_CLK_B,
+
+	/* IPSR10 */
+	GPIO_FN_SD1_WP, GPIO_FN_MMC1_D7, GPIO_FN_TS_SPSYNC1, GPIO_FN_USB1_IDIN,
+	GPIO_FN_GLO_RFON, GPIO_FN_VI1_CLK_B, GPIO_FN_SDA2_D, GPIO_FN_SDA2_CIS_D,
+	GPIO_FN_SIM0_D_B, GPIO_FN_SD2_CLK, GPIO_FN_MMC0_CLK, GPIO_FN_SIM0_CLK,
+	GPIO_FN_VI0_DATA0_VI0_B0_B, GPIO_FN_TS_SDEN0_C, GPIO_FN_GLO_SCLK_B,
+	GPIO_FN_VI3_DATA0_B, GPIO_FN_SD2_CMD, GPIO_FN_MMC0_CMD, GPIO_FN_SIM0_D,
+	GPIO_FN_VI0_DATA1_VI0_B1_B, GPIO_FN_SCIFB1_SCK_E, GPIO_FN_SCK1_D,
+	GPIO_FN_TS_SPSYNC0_C, GPIO_FN_GLO_SDATA_B, GPIO_FN_VI3_DATA1_B,
+	GPIO_FN_SD2_DAT0, GPIO_FN_MMC0_D0, GPIO_FN_FMCLK_B,
+	GPIO_FN_VI0_DATA2_VI0_B2_B, GPIO_FN_SCIFB1_RXD_E, GPIO_FN_RX1_D,
+	GPIO_FN_TS_SDAT0_C, GPIO_FN_GLO_SS_B, GPIO_FN_VI3_DATA2_B,
+	GPIO_FN_SD2_DAT1, GPIO_FN_MMC0_D1, GPIO_FN_FMIN_B, GPIO_FN_RDS_DATA,
+	GPIO_FN_VI0_DATA3_VI0_B3_B, GPIO_FN_SCIFB1_TXD_E, GPIO_FN_TX1_D,
+	GPIO_FN_TS_SCK0_C, GPIO_FN_GLO_RFON_B, GPIO_FN_VI3_DATA3_B,
+	GPIO_FN_SD2_DAT2, GPIO_FN_MMC0_D2, GPIO_FN_BPFCLK_B, GPIO_FN_RDS_CLK,
+	GPIO_FN_VI0_DATA4_VI0_B4_B, GPIO_FN_HRX0_D, GPIO_FN_TS_SDEN1_B,
+	GPIO_FN_GLO_Q0_B, GPIO_FN_VI3_DATA4_B, GPIO_FN_SD2_DAT3,
+	GPIO_FN_MMC0_D3, GPIO_FN_SIM0_RST, GPIO_FN_VI0_DATA5_VI0_B5_B,
+	GPIO_FN_HTX0_D, GPIO_FN_TS_SPSYNC1_B, GPIO_FN_GLO_Q1_B,
+	GPIO_FN_VI3_DATA5_B, GPIO_FN_SD2_CD, GPIO_FN_MMC0_D4,
+	GPIO_FN_TS_SDAT0_B, GPIO_FN_USB2_EXTP, GPIO_FN_GLO_I0,
+	GPIO_FN_VI0_DATA6_VI0_B6_B, GPIO_FN_HCTS0_N_D, GPIO_FN_TS_SDAT1_B,
+	GPIO_FN_GLO_I0_B, GPIO_FN_VI3_DATA6_B,
+
+	/* IPSR11 */
+	GPIO_FN_SD2_WP, GPIO_FN_MMC0_D5, GPIO_FN_TS_SCK0_B, GPIO_FN_USB2_IDIN,
+	GPIO_FN_GLO_I1, GPIO_FN_VI0_DATA7_VI0_B7_B, GPIO_FN_HRTS0_N_D,
+	GPIO_FN_TS_SCK1_B, GPIO_FN_GLO_I1_B, GPIO_FN_VI3_DATA7_B,
+	GPIO_FN_SD3_CLK, GPIO_FN_MMC1_CLK, GPIO_FN_SD3_CMD, GPIO_FN_MMC1_CMD,
+	GPIO_FN_MTS_N, GPIO_FN_SD3_DAT0, GPIO_FN_MMC1_D0, GPIO_FN_STM_N,
+	GPIO_FN_SD3_DAT1, GPIO_FN_MMC1_D1, GPIO_FN_MDATA, GPIO_FN_SD3_DAT2,
+	GPIO_FN_MMC1_D2, GPIO_FN_SDATA, GPIO_FN_SD3_DAT3, GPIO_FN_MMC1_D3,
+	GPIO_FN_SCKZ, GPIO_FN_SD3_CD, GPIO_FN_MMC1_D4, GPIO_FN_TS_SDAT1,
+	GPIO_FN_VSP, GPIO_FN_GLO_Q0, GPIO_FN_SIM0_RST_B, GPIO_FN_SD3_WP,
+	GPIO_FN_MMC1_D5, GPIO_FN_TS_SCK1, GPIO_FN_GLO_Q1, GPIO_FN_FMIN_C,
+	GPIO_FN_RDS_DATA_B, GPIO_FN_FMIN_E, GPIO_FN_RDS_DATA_D, GPIO_FN_FMIN_F,
+	GPIO_FN_RDS_DATA_E, GPIO_FN_MLB_CLK, GPIO_FN_SCL2_B, GPIO_FN_SCL2_CIS_B,
+	GPIO_FN_MLB_SIG, GPIO_FN_SCIFB1_RXD_D, GPIO_FN_RX1_C, GPIO_FN_SDA2_B,
+	GPIO_FN_SDA2_CIS_B, GPIO_FN_MLB_DAT, GPIO_FN_SPV_EVEN,
+	GPIO_FN_SCIFB1_TXD_D, GPIO_FN_TX1_C, GPIO_FN_BPFCLK_C,
+	GPIO_FN_RDS_CLK_B, GPIO_FN_SSI_SCK0129, GPIO_FN_CAN_CLK_B,
+	GPIO_FN_MOUT0,
+
+	/* IPSR12 */
+	GPIO_FN_SSI_WS0129, GPIO_FN_CAN0_TX_B, GPIO_FN_MOUT1,
+	GPIO_FN_SSI_SDATA0, GPIO_FN_CAN0_RX_B, GPIO_FN_MOUT2,
+	GPIO_FN_SSI_SDATA1, GPIO_FN_CAN1_TX_B, GPIO_FN_MOUT5,
+	GPIO_FN_SSI_SDATA2, GPIO_FN_CAN1_RX_B, GPIO_FN_SSI_SCK1, GPIO_FN_MOUT6,
+	GPIO_FN_SSI_SCK34, GPIO_FN_STP_OPWM_0, GPIO_FN_SCIFB0_SCK,
+	GPIO_FN_MSIOF1_SCK, GPIO_FN_CAN_DEBUG_HW_TRIGGER, GPIO_FN_SSI_WS34,
+	GPIO_FN_STP_IVCXO27_0, GPIO_FN_SCIFB0_RXD, GPIO_FN_MSIOF1_SYNC,
+	GPIO_FN_CAN_STEP0, GPIO_FN_SSI_SDATA3, GPIO_FN_STP_ISCLK_0,
+	GPIO_FN_SCIFB0_TXD, GPIO_FN_MSIOF1_SS1, GPIO_FN_CAN_TXCLK,
+	GPIO_FN_SSI_SCK4, GPIO_FN_STP_ISD_0, GPIO_FN_SCIFB0_CTS_N,
+	GPIO_FN_MSIOF1_SS2, GPIO_FN_SSI_SCK5_C, GPIO_FN_CAN_DEBUGOUT0,
+	GPIO_FN_SSI_WS4, GPIO_FN_STP_ISEN_0, GPIO_FN_SCIFB0_RTS_N,
+	GPIO_FN_MSIOF1_TXD, GPIO_FN_SSI_WS5_C, GPIO_FN_CAN_DEBUGOUT1,
+	GPIO_FN_SSI_SDATA4, GPIO_FN_STP_ISSYNC_0, GPIO_FN_MSIOF1_RXD,
+	GPIO_FN_CAN_DEBUGOUT2, GPIO_FN_SSI_SCK5, GPIO_FN_SCIFB1_SCK,
+	GPIO_FN_IERX_B, GPIO_FN_DU2_EXHSYNC_DU2_HSYNC, GPIO_FN_QSTH_QHS,
+	GPIO_FN_CAN_DEBUGOUT3, GPIO_FN_SSI_WS5, GPIO_FN_SCIFB1_RXD,
+	GPIO_FN_IECLK_B, GPIO_FN_DU2_EXVSYNC_DU2_VSYNC, GPIO_FN_QSTB_QHE,
+	GPIO_FN_CAN_DEBUGOUT4,
+
+	/* IPSR13 */
+	GPIO_FN_SSI_SDATA5, GPIO_FN_SCIFB1_TXD, GPIO_FN_IETX_B, GPIO_FN_DU2_DR2,
+	GPIO_FN_LCDOUT2, GPIO_FN_CAN_DEBUGOUT5, GPIO_FN_SSI_SCK6,
+	GPIO_FN_SCIFB1_CTS_N, GPIO_FN_BPFCLK_D, GPIO_FN_RDS_CLK_C,
+	GPIO_FN_DU2_DR3, GPIO_FN_LCDOUT3, GPIO_FN_CAN_DEBUGOUT6,
+	GPIO_FN_BPFCLK_F, GPIO_FN_RDS_CLK_E, GPIO_FN_SSI_WS6,
+	GPIO_FN_SCIFB1_RTS_N, GPIO_FN_CAN0_TX_D, GPIO_FN_DU2_DR4,
+	GPIO_FN_LCDOUT4, GPIO_FN_CAN_DEBUGOUT7, GPIO_FN_SSI_SDATA6,
+	GPIO_FN_FMIN_D, GPIO_FN_RDS_DATA_C, GPIO_FN_DU2_DR5, GPIO_FN_LCDOUT5,
+	GPIO_FN_CAN_DEBUGOUT8, GPIO_FN_SSI_SCK78, GPIO_FN_STP_IVCXO27_1,
+	GPIO_FN_SCK1, GPIO_FN_SCIFA1_SCK, GPIO_FN_DU2_DR6, GPIO_FN_LCDOUT6,
+	GPIO_FN_CAN_DEBUGOUT9, GPIO_FN_SSI_WS78, GPIO_FN_STP_ISCLK_1,
+	GPIO_FN_SCIFB2_SCK, GPIO_FN_SCIFA2_CTS_N, GPIO_FN_DU2_DR7,
+	GPIO_FN_LCDOUT7, GPIO_FN_CAN_DEBUGOUT10, GPIO_FN_SSI_SDATA7,
+	GPIO_FN_STP_ISD_1, GPIO_FN_SCIFB2_RXD, GPIO_FN_SCIFA2_RTS_N,
+	GPIO_FN_TCLK2, GPIO_FN_QSTVA_QVS, GPIO_FN_CAN_DEBUGOUT11,
+	GPIO_FN_BPFCLK_E, GPIO_FN_RDS_CLK_D, GPIO_FN_SSI_SDATA7_B,
+	GPIO_FN_FMIN_G, GPIO_FN_RDS_DATA_F, GPIO_FN_SSI_SDATA8,
+	GPIO_FN_STP_ISEN_1, GPIO_FN_SCIFB2_TXD, GPIO_FN_CAN0_TX_C,
+	GPIO_FN_CAN_DEBUGOUT12, GPIO_FN_SSI_SDATA8_B, GPIO_FN_SSI_SDATA9,
+	GPIO_FN_STP_ISSYNC_1, GPIO_FN_SCIFB2_CTS_N, GPIO_FN_SSI_WS1,
+	GPIO_FN_SSI_SDATA5_C, GPIO_FN_CAN_DEBUGOUT13, GPIO_FN_AUDIO_CLKA,
+	GPIO_FN_SCIFB2_RTS_N, GPIO_FN_CAN_DEBUGOUT14,
+
+	/* IPSR14 */
+	GPIO_FN_AUDIO_CLKB, GPIO_FN_SCIF_CLK, GPIO_FN_CAN0_RX_D,
+	GPIO_FN_DVC_MUTE, GPIO_FN_CAN0_RX_C, GPIO_FN_CAN_DEBUGOUT15,
+	GPIO_FN_REMOCON, GPIO_FN_SCIFA0_SCK, GPIO_FN_HSCK1, GPIO_FN_SCK0,
+	GPIO_FN_MSIOF3_SS2, GPIO_FN_DU2_DG2, GPIO_FN_LCDOUT10, GPIO_FN_SDA1_C,
+	GPIO_FN_SDA1_CIS_C, GPIO_FN_SCIFA0_RXD, GPIO_FN_HRX1, GPIO_FN_RX0,
+	GPIO_FN_DU2_DR0, GPIO_FN_LCDOUT0, GPIO_FN_SCIFA0_TXD, GPIO_FN_HTX1,
+	GPIO_FN_TX0, GPIO_FN_DU2_DR1, GPIO_FN_LCDOUT1, GPIO_FN_SCIFA0_CTS_N,
+	GPIO_FN_HCTS1_N, GPIO_FN_CTS0_N, GPIO_FN_MSIOF3_SYNC, GPIO_FN_DU2_DG3,
+	GPIO_FN_LCDOUT11, GPIO_FN_PWM0_B, GPIO_FN_SCL1_C, GPIO_FN_SCL1_CIS_C,
+	GPIO_FN_SCIFA0_RTS_N, GPIO_FN_HRTS1_N, GPIO_FN_RTS0_N_TANS,
+	GPIO_FN_MSIOF3_SS1, GPIO_FN_DU2_DG0, GPIO_FN_LCDOUT8, GPIO_FN_PWM1_B,
+	GPIO_FN_SCIFA1_RXD, GPIO_FN_AD_DI, GPIO_FN_RX1,
+	GPIO_FN_DU2_EXODDF_DU2_ODDF_DISP_CDE, GPIO_FN_QCPV_QDE,
+	GPIO_FN_SCIFA1_TXD, GPIO_FN_AD_DO, GPIO_FN_TX1, GPIO_FN_DU2_DG1,
+	GPIO_FN_LCDOUT9, GPIO_FN_SCIFA1_CTS_N, GPIO_FN_AD_CLK,
+	GPIO_FN_CTS1_N, GPIO_FN_MSIOF3_RXD, GPIO_FN_DU0_DOTCLKOUT, GPIO_FN_QCLK,
+	GPIO_FN_SCIFA1_RTS_N, GPIO_FN_AD_NCS_N, GPIO_FN_RTS1_N_TANS,
+	GPIO_FN_MSIOF3_TXD, GPIO_FN_DU1_DOTCLKOUT, GPIO_FN_QSTVB_QVE,
+	GPIO_FN_HRTS0_N_C,
+
+	/* IPSR15 */
+	GPIO_FN_SCIFA2_SCK, GPIO_FN_FMCLK, GPIO_FN_MSIOF3_SCK, GPIO_FN_DU2_DG7,
+	GPIO_FN_LCDOUT15, GPIO_FN_SCIF_CLK_B, GPIO_FN_SCIFA2_RXD, GPIO_FN_FMIN,
+	GPIO_FN_DU2_DB0, GPIO_FN_LCDOUT16, GPIO_FN_SCL2, GPIO_FN_SCL2_CIS,
+	GPIO_FN_SCIFA2_TXD, GPIO_FN_BPFCLK, GPIO_FN_DU2_DB1, GPIO_FN_LCDOUT17,
+	GPIO_FN_SDA2, GPIO_FN_SDA2_CIS, GPIO_FN_HSCK0, GPIO_FN_TS_SDEN0,
+	GPIO_FN_DU2_DG4, GPIO_FN_LCDOUT12, GPIO_FN_HCTS0_N_C, GPIO_FN_HRX0,
+	GPIO_FN_DU2_DB2, GPIO_FN_LCDOUT18, GPIO_FN_HTX0, GPIO_FN_DU2_DB3,
+	GPIO_FN_LCDOUT19, GPIO_FN_HCTS0_N, GPIO_FN_SSI_SCK9, GPIO_FN_DU2_DB4,
+	GPIO_FN_LCDOUT20, GPIO_FN_HRTS0_N, GPIO_FN_SSI_WS9, GPIO_FN_DU2_DB5,
+	GPIO_FN_LCDOUT21, GPIO_FN_MSIOF0_SCK, GPIO_FN_TS_SDAT0, GPIO_FN_ADICLK,
+	GPIO_FN_DU2_DB6, GPIO_FN_LCDOUT22, GPIO_FN_MSIOF0_SYNC, GPIO_FN_TS_SCK0,
+	GPIO_FN_SSI_SCK2, GPIO_FN_ADIDATA, GPIO_FN_DU2_DB7, GPIO_FN_LCDOUT23,
+	GPIO_FN_SCIFA2_RXD_B, GPIO_FN_MSIOF0_SS1, GPIO_FN_ADICHS0,
+	GPIO_FN_DU2_DG5, GPIO_FN_LCDOUT13, GPIO_FN_MSIOF0_TXD, GPIO_FN_ADICHS1,
+	GPIO_FN_DU2_DG6, GPIO_FN_LCDOUT14,
+
+	/* IPSR16 */
+	GPIO_FN_MSIOF0_SS2, GPIO_FN_AUDIO_CLKOUT, GPIO_FN_ADICHS2,
+	GPIO_FN_DU2_DISP, GPIO_FN_QPOLA, GPIO_FN_HTX0_C, GPIO_FN_SCIFA2_TXD_B,
+	GPIO_FN_MSIOF0_RXD, GPIO_FN_TS_SPSYNC0, GPIO_FN_SSI_WS2,
+	GPIO_FN_ADICS_SAMP, GPIO_FN_DU2_CDE, GPIO_FN_QPOLB, GPIO_FN_HRX0_C,
+	GPIO_FN_USB1_PWEN, GPIO_FN_AUDIO_CLKOUT_D, GPIO_FN_USB1_OVC,
+	GPIO_FN_TCLK1_B,
+};
+
+#endif /* __ASM_R8A7790_H__ */
diff --git a/arch/arm/include/asm/arch-rmobile/r8a7790.h b/arch/arm/include/asm/arch-rmobile/r8a7790.h
new file mode 100644
index 0000000000..42d65d356d
--- /dev/null
+++ b/arch/arm/include/asm/arch-rmobile/r8a7790.h
@@ -0,0 +1,614 @@
+/*
+ * arch/arm/include/asm/arch-rmobile/r8a7790.h
+ *
+ * Copyright (C) 2013 Renesas Electronics Corporation
+ *
+ * SPDX-License-Identifier: GPL-2.0
+ */
+
+#ifndef __ASM_ARCH_R8A7790_H
+#define __ASM_ARCH_R8A7790_H
+
+/*
+ * R8A7790 I/O Addresses
+ */
+#define	RWDT_BASE		0xE6020000
+#define	SWDT_BASE		0xE6030000
+#define	LBSC_BASE		0xFEC00200
+#define DBSC3_0_BASE		0xE6790000
+#define DBSC3_1_BASE		0xE67A0000
+#define TMU_BASE		0xE61E0000
+#define	GPIO5_BASE		0xE6055000
+
+#define S3C_BASE		0xE6784000
+#define S3C_INT_BASE		0xE6784A00
+#define S3C_MEDIA_BASE		0xE6784B00
+
+#define S3C_QOS_DCACHE_BASE	0xE6784BDC
+#define S3C_QOS_CCI0_BASE	0xE6784C00
+#define S3C_QOS_CCI1_BASE	0xE6784C24
+#define S3C_QOS_MXI_BASE	0xE6784C48
+#define S3C_QOS_AXI_BASE	0xE6784C6C
+
+#define DBSC3_0_QOS_R0_BASE	0xE6791000
+#define DBSC3_0_QOS_R1_BASE	0xE6791100
+#define DBSC3_0_QOS_R2_BASE	0xE6791200
+#define DBSC3_0_QOS_R3_BASE	0xE6791300
+#define DBSC3_0_QOS_R4_BASE	0xE6791400
+#define DBSC3_0_QOS_R5_BASE	0xE6791500
+#define DBSC3_0_QOS_R6_BASE	0xE6791600
+#define DBSC3_0_QOS_R7_BASE	0xE6791700
+#define DBSC3_0_QOS_R8_BASE	0xE6791800
+#define DBSC3_0_QOS_R9_BASE	0xE6791900
+#define DBSC3_0_QOS_R10_BASE	0xE6791A00
+#define DBSC3_0_QOS_R11_BASE	0xE6791B00
+#define DBSC3_0_QOS_R12_BASE	0xE6791C00
+#define DBSC3_0_QOS_R13_BASE	0xE6791D00
+#define DBSC3_0_QOS_R14_BASE	0xE6791E00
+#define DBSC3_0_QOS_R15_BASE	0xE6791F00
+#define DBSC3_0_QOS_W0_BASE	0xE6792000
+#define DBSC3_0_QOS_W1_BASE	0xE6792100
+#define DBSC3_0_QOS_W2_BASE	0xE6792200
+#define DBSC3_0_QOS_W3_BASE	0xE6792300
+#define DBSC3_0_QOS_W4_BASE	0xE6792400
+#define DBSC3_0_QOS_W5_BASE	0xE6792500
+#define DBSC3_0_QOS_W6_BASE	0xE6792600
+#define DBSC3_0_QOS_W7_BASE	0xE6792700
+#define DBSC3_0_QOS_W8_BASE	0xE6792800
+#define DBSC3_0_QOS_W9_BASE	0xE6792900
+#define DBSC3_0_QOS_W10_BASE	0xE6792A00
+#define DBSC3_0_QOS_W11_BASE	0xE6792B00
+#define DBSC3_0_QOS_W12_BASE	0xE6792C00
+#define DBSC3_0_QOS_W13_BASE	0xE6792D00
+#define DBSC3_0_QOS_W14_BASE	0xE6792E00
+#define DBSC3_0_QOS_W15_BASE	0xE6792F00
+
+#define DBSC3_0_DBADJ2		0xE67900C8
+
+#define CCI_400_MAXOT_1		0xF0091110
+#define CCI_400_MAXOT_2		0xF0092110
+#define CCI_400_QOSCNTL_1	0xF009110C
+#define CCI_400_QOSCNTL_2	0xF009210C
+
+#define	MXI_BASE		0xFE960000
+#define	MXI_QOS_BASE		0xFE960300
+
+#define SYS_AXI_SYX64TO128_BASE	0xFF800300
+#define SYS_AXI_AVB_BASE	0xFF800340
+#define SYS_AXI_G2D_BASE	0xFF800540
+#define SYS_AXI_IMP0_BASE	0xFF800580
+#define SYS_AXI_IMP1_BASE	0xFF8005C0
+#define SYS_AXI_IMUX0_BASE	0xFF800600
+#define SYS_AXI_IMUX1_BASE	0xFF800640
+#define SYS_AXI_IMUX2_BASE	0xFF800680
+#define SYS_AXI_LBS_BASE	0xFF8006C0
+#define SYS_AXI_MMUDS_BASE	0xFF800700
+#define SYS_AXI_MMUM_BASE	0xFF800740
+#define SYS_AXI_MMUR_BASE	0xFF800780
+#define SYS_AXI_MMUS0_BASE	0xFF8007C0
+#define SYS_AXI_MMUS1_BASE	0xFF800800
+#define SYS_AXI_MTSB0_BASE	0xFF800880
+#define SYS_AXI_MTSB1_BASE	0xFF8008C0
+#define SYS_AXI_PCI_BASE	0xFF800900
+#define SYS_AXI_RTX_BASE	0xFF800940
+#define SYS_AXI_SDS0_BASE	0xFF800A80
+#define SYS_AXI_SDS1_BASE	0xFF800AC0
+#define SYS_AXI_USB20_BASE	0xFF800C00
+#define SYS_AXI_USB21_BASE	0xFF800C40
+#define SYS_AXI_USB22_BASE	0xFF800C80
+#define SYS_AXI_USB30_BASE	0xFF800CC0
+
+#define RT_AXI_SHX_BASE		0xFF810100
+#define RT_AXI_RDS_BASE		0xFF8101C0
+#define RT_AXI_RTX64TO128_BASE	0xFF810200
+#define RT_AXI_STPRO_BASE	0xFF810240
+
+#define MP_AXI_ADSP_BASE	0xFF820100
+#define MP_AXI_ASDS0_BASE	0xFF8201C0
+#define MP_AXI_ASDS1_BASE	0xFF820200
+#define MP_AXI_MLP_BASE		0xFF820240
+#define MP_AXI_MMUMP_BASE	0xFF820280
+#define MP_AXI_SPU_BASE		0xFF8202C0
+#define MP_AXI_SPUC_BASE	0xFF820300
+
+#define SYS_AXI256_AXI128TO256_BASE	0xFF860100
+#define SYS_AXI256_SYX_BASE	0xFF860140
+#define SYS_AXI256_MPX_BASE	0xFF860180
+#define SYS_AXI256_MXI_BASE	0xFF8601C0
+
+#define CCI_AXI_MMUS0_BASE	0xFF880100
+#define CCI_AXI_SYX2_BASE	0xFF880140
+#define CCI_AXI_MMUR_BASE	0xFF880180
+#define CCI_AXI_MMUDS_BASE	0xFF8801C0
+#define CCI_AXI_MMUM_BASE	0xFF880200
+#define CCI_AXI_MXI_BASE	0xFF880240
+#define CCI_AXI_MMUS1_BASE	0xFF880280
+#define CCI_AXI_MMUMP_BASE	0xFF8802C0
+
+#define MEDIA_AXI_JPR_BASE	0xFE964100
+#define MEDIA_AXI_JPW_BASE	0xFE966100
+#define MEDIA_AXI_GCU0R_BASE	0xFE964140
+#define MEDIA_AXI_GCU0W_BASE	0xFE966140
+#define MEDIA_AXI_GCU1R_BASE	0xFE964180
+#define MEDIA_AXI_GCU1W_BASE	0xFE966180
+#define MEDIA_AXI_TDMR_BASE	0xFE964500
+#define MEDIA_AXI_TDMW_BASE	0xFE966500
+#define MEDIA_AXI_VSP0CR_BASE	0xFE964540
+#define MEDIA_AXI_VSP0CW_BASE	0xFE966540
+#define MEDIA_AXI_VSP1CR_BASE	0xFE964580
+#define MEDIA_AXI_VSP1CW_BASE	0xFE966580
+#define MEDIA_AXI_VSPDU0CR_BASE	0xFE9645C0
+#define MEDIA_AXI_VSPDU0CW_BASE	0xFE9665C0
+#define MEDIA_AXI_VSPDU1CR_BASE	0xFE964600
+#define MEDIA_AXI_VSPDU1CW_BASE	0xFE966600
+#define MEDIA_AXI_VIN0W_BASE	0xFE966900
+#define MEDIA_AXI_VSP0R_BASE	0xFE964D00
+#define MEDIA_AXI_VSP0W_BASE	0xFE966D00
+#define MEDIA_AXI_FDP0R_BASE	0xFE964D40
+#define MEDIA_AXI_FDP0W_BASE	0xFE966D40
+#define MEDIA_AXI_IMSR_BASE	0xFE964D80
+#define MEDIA_AXI_IMSW_BASE	0xFE966D80
+#define MEDIA_AXI_VSP1R_BASE	0xFE965100
+#define MEDIA_AXI_VSP1W_BASE	0xFE967100
+#define MEDIA_AXI_FDP1R_BASE	0xFE965140
+#define MEDIA_AXI_FDP1W_BASE	0xFE967140
+#define MEDIA_AXI_IMRR_BASE	0xFE965180
+#define MEDIA_AXI_IMRW_BASE	0xFE967180
+#define MEDIA_AXI_FDP2R_BASE	0xFE9651C0
+#define MEDIA_AXI_FDP2W_BASE	0xFE966DC0
+#define MEDIA_AXI_VSPD0R_BASE	0xFE965500
+#define MEDIA_AXI_VSPD0W_BASE	0xFE967500
+#define MEDIA_AXI_VSPD1R_BASE	0xFE965540
+#define MEDIA_AXI_VSPD1W_BASE	0xFE967540
+#define MEDIA_AXI_DU0R_BASE	0xFE965580
+#define MEDIA_AXI_DU0W_BASE	0xFE967580
+#define MEDIA_AXI_DU1R_BASE	0xFE9655C0
+#define MEDIA_AXI_DU1W_BASE	0xFE9675C0
+#define MEDIA_AXI_VCP0CR_BASE	0xFE965900
+#define MEDIA_AXI_VCP0CW_BASE	0xFE967900
+#define MEDIA_AXI_VCP0VR_BASE	0xFE965940
+#define MEDIA_AXI_VCP0VW_BASE	0xFE967940
+#define MEDIA_AXI_VPC0R_BASE	0xFE965980
+#define MEDIA_AXI_VCP1CR_BASE	0xFE965D00
+#define MEDIA_AXI_VCP1CW_BASE	0xFE967D00
+#define MEDIA_AXI_VCP1VR_BASE	0xFE965D40
+#define MEDIA_AXI_VCP1VW_BASE	0xFE967D40
+#define MEDIA_AXI_VPC1R_BASE	0xFE965D80
+
+#define SYS_AXI_AVBDMSCR	0xFF802000
+#define SYS_AXI_SYX2DMSCR	0xFF802004
+#define SYS_AXI_CC50DMSCR	0xFF802008
+#define SYS_AXI_CC51DMSCR	0xFF80200C
+#define SYS_AXI_CCIDMSCR	0xFF802010
+#define SYS_AXI_CSDMSCR		0xFF802014
+#define SYS_AXI_DDMDMSCR	0xFF802018
+#define SYS_AXI_ETHDMSCR	0xFF80201C
+#define SYS_AXI_G2DDMSCR	0xFF802020
+#define SYS_AXI_IMP0DMSCR	0xFF802024
+#define SYS_AXI_IMP1DMSCR	0xFF802028
+#define SYS_AXI_LBSDMSCR	0xFF80202C
+#define SYS_AXI_MMUDSDMSCR	0xFF802030
+#define SYS_AXI_MMUMXDMSCR	0xFF802034
+#define SYS_AXI_MMURDDMSCR	0xFF802038
+#define SYS_AXI_MMUS0DMSCR	0xFF80203C
+#define SYS_AXI_MMUS1DMSCR	0xFF802040
+#define SYS_AXI_MPXDMSCR	0xFF802044
+#define SYS_AXI_MTSB0DMSCR	0xFF802048
+#define SYS_AXI_MTSB1DMSCR	0xFF80204C
+#define SYS_AXI_PCIDMSCR	0xFF802050
+#define SYS_AXI_RTXDMSCR	0xFF802054
+#define SYS_AXI_SAT0DMSCR	0xFF802058
+#define SYS_AXI_SAT1DMSCR	0xFF80205C
+#define SYS_AXI_SDM0DMSCR	0xFF802060
+#define SYS_AXI_SDM1DMSCR	0xFF802064
+#define SYS_AXI_SDS0DMSCR	0xFF802068
+#define SYS_AXI_SDS1DMSCR	0xFF80206C
+#define SYS_AXI_ETRABDMSCR	0xFF802070
+#define SYS_AXI_ETRKFDMSCR	0xFF802074
+#define SYS_AXI_UDM0DMSCR	0xFF802078
+#define SYS_AXI_UDM1DMSCR	0xFF80207C
+#define SYS_AXI_USB20DMSCR	0xFF802080
+#define SYS_AXI_USB21DMSCR	0xFF802084
+#define SYS_AXI_USB22DMSCR	0xFF802088
+#define SYS_AXI_USB30DMSCR	0xFF80208C
+#define SYS_AXI_X128TO64SLVDMSCR	0xFF802100
+#define SYS_AXI_X64TO128SLVDMSCR	0xFF802104
+#define SYS_AXI_AVBSLVDMSCR	0xFF802108
+#define SYS_AXI_SYX2SLVDMSCR	0xFF80210C
+#define SYS_AXI_ETHSLVDMSCR	0xFF802110
+#define SYS_AXI_GICSLVDMSCR	0xFF802114
+#define SYS_AXI_IMPSLVDMSCR	0xFF802118
+#define SYS_AXI_IMX0SLVDMSCR	0xFF80211C
+#define SYS_AXI_IMX1SLVDMSCR	0xFF802120
+#define SYS_AXI_IMX2SLVDMSCR	0xFF802124
+#define SYS_AXI_LBSSLVDMSCR	0xFF802128
+#define SYS_AXI_MMC0SLVDMSCR	0xFF80212C
+#define SYS_AXI_MMC1SLVDMSCR	0xFF802130
+#define SYS_AXI_MPXSLVDMSCR	0xFF802134
+#define SYS_AXI_MTSB0SLVDMSCR	0xFF802138
+#define SYS_AXI_MTSB1SLVDMSCR	0xFF80213C
+#define SYS_AXI_MXTSLVDMSCR	0xFF802140
+#define SYS_AXI_PCISLVDMSCR	0xFF802144
+#define SYS_AXI_SYAPBSLVDMSCR	0xFF802148
+#define SYS_AXI_QSAPBSLVDMSCR	0xFF80214C
+#define SYS_AXI_RTXSLVDMSCR	0xFF802150
+#define SYS_AXI_SAT0SLVDMSCR	0xFF802168
+#define SYS_AXI_SAT1SLVDMSCR	0xFF80216C
+#define SYS_AXI_SDAP0SLVDMSCR	0xFF802170
+#define SYS_AXI_SDAP1SLVDMSCR	0xFF802174
+#define SYS_AXI_SDAP2SLVDMSCR	0xFF802178
+#define SYS_AXI_SDAP3SLVDMSCR	0xFF80217C
+#define SYS_AXI_SGXSLVDMSCR	0xFF802180
+#define SYS_AXI_STBSLVDMSCR	0xFF802188
+#define SYS_AXI_STMSLVDMSCR	0xFF80218C
+#define SYS_AXI_TSPL0SLVDMSCR	0xFF802194
+#define SYS_AXI_TSPL1SLVDMSCR	0xFF802198
+#define SYS_AXI_TSPL2SLVDMSCR	0xFF80219C
+#define SYS_AXI_USB20SLVDMSCR	0xFF8021A0
+#define SYS_AXI_USB21SLVDMSCR	0xFF8021A4
+#define SYS_AXI_USB22SLVDMSCR	0xFF8021A8
+#define SYS_AXI_USB30SLVDMSCR	0xFF8021AC
+
+#define RT_AXI_CBMDMSCR		0xFF812000
+#define RT_AXI_DBDMSCR		0xFF812004
+#define RT_AXI_RDMDMSCR		0xFF812008
+#define RT_AXI_RDSDMSCR		0xFF81200C
+#define RT_AXI_STRDMSCR		0xFF812010
+#define RT_AXI_SY2RTDMSCR	0xFF812014
+#define RT_AXI_CBSSLVDMSCR	0xFF812100
+#define RT_AXI_DBSSLVDMSCR	0xFF812104
+#define RT_AXI_RTAP1SLVDMSCR	0xFF812108
+#define RT_AXI_RTAP2SLVDMSCR	0xFF81210C
+#define RT_AXI_RTAP3SLVDMSCR	0xFF812110
+#define RT_AXI_RT2SYSLVDMSCR	0xFF812114
+#define RT_AXI_A128TO64SLVDMSCR	0xFF812118
+#define RT_AXI_A64TO128SLVDMSCR	0xFF81211C
+#define RT_AXI_A64TO128CSLVDMSCR	0xFF812120
+#define RT_AXI_UTLBRSLVDMSCR	0xFF812128
+
+#define MP_AXI_ADSPDMSCR	0xFF822000
+#define MP_AXI_ASDM0DMSCR	0xFF822004
+#define MP_AXI_ASDM1DMSCR	0xFF822008
+#define MP_AXI_ASDS0DMSCR	0xFF82200C
+#define MP_AXI_ASDS1DMSCR	0xFF822010
+#define MP_AXI_MLPDMSCR		0xFF822014
+#define MP_AXI_MMUMPDMSCR	0xFF822018
+#define MP_AXI_SPUDMSCR		0xFF82201C
+#define MP_AXI_SPUCDMSCR	0xFF822020
+#define MP_AXI_SY2MPDMSCR	0xFF822024
+#define MP_AXI_ADSPSLVDMSCR	0xFF822100
+#define MP_AXI_MLMSLVDMSCR	0xFF822104
+#define MP_AXI_MPAP4SLVDMSCR	0xFF822108
+#define MP_AXI_MPAP5SLVDMSCR	0xFF82210C
+#define MP_AXI_MPAP6SLVDMSCR	0xFF822110
+#define MP_AXI_MPAP7SLVDMSCR	0xFF822114
+#define MP_AXI_MP2SYSLVDMSCR	0xFF822118
+#define MP_AXI_MP2SY2SLVDMSCR	0xFF82211C
+#define MP_AXI_MPXAPSLVDMSCR	0xFF822124
+#define MP_AXI_SPUSLVDMSCR	0xFF822128
+#define MP_AXI_UTLBMPSLVDMSCR	0xFF82212C
+
+#define ADM_AXI_ASDM0DMSCR	0xFF842000
+#define ADM_AXI_ASDM1DMSCR	0xFF842004
+#define ADM_AXI_MPAP1SLVDMSCR	0xFF842104
+#define ADM_AXI_MPAP2SLVDMSCR	0xFF842108
+#define ADM_AXI_MPAP3SLVDMSCR	0xFF84210C
+
+#define DM_AXI_RDMDMSCR		0xFF852000
+#define DM_AXI_SDM0DMSCR	0xFF852004
+#define DM_AXI_SDM1DMSCR	0xFF852008
+#define DM_AXI_MMAP0SLVDMSCR	0xFF852100
+#define DM_AXI_MMAP1SLVDMSCR	0xFF852104
+#define DM_AXI_QSPAPSLVDMSCR	0xFF852108
+#define DM_AXI_RAP4SLVDMSCR	0xFF85210C
+#define DM_AXI_RAP5SLVDMSCR	0xFF852110
+#define DM_AXI_SAP4SLVDMSCR	0xFF852114
+#define DM_AXI_SAP5SLVDMSCR	0xFF852118
+#define DM_AXI_SAP6SLVDMSCR	0xFF85211C
+#define DM_AXI_SAP65SLVDMSCR	0xFF852120
+#define DM_AXI_SDAP0SLVDMSCR	0xFF852124
+#define DM_AXI_SDAP1SLVDMSCR	0xFF852128
+#define DM_AXI_SDAP2SLVDMSCR	0xFF85212C
+#define DM_AXI_SDAP3SLVDMSCR	0xFF852130
+
+#define SYS_AXI256_SYXDMSCR	0xFF862000
+#define SYS_AXI256_MPXDMSCR	0xFF862004
+#define SYS_AXI256_MXIDMSCR	0xFF862008
+#define SYS_AXI256_X128TO256SLVDMSCR	0xFF862100
+#define SYS_AXI256_X256TO128SLVDMSCR	0xFF862104
+#define SYS_AXI256_SYXSLVDMSCR	0xFF862108
+#define SYS_AXI256_CCXSLVDMSCR	0xFF86210C
+#define SYS_AXI256_S3CSLVDMSCR	0xFF862110
+
+#define MXT_SYXDMSCR		0xFF872000
+#define MXT_CMM0SLVDMSCR	0xFF872100
+#define MXT_CMM1SLVDMSCR	0xFF872104
+#define MXT_CMM2SLVDMSCR	0xFF872108
+#define MXT_FDPSLVDMSCR		0xFF87210C
+#define MXT_IMRSLVDMSCR		0xFF872110
+#define MXT_VINSLVDMSCR		0xFF872114
+#define MXT_VPC0SLVDMSCR	0xFF872118
+#define MXT_VPC1SLVDMSCR	0xFF87211C
+#define MXT_VSP0SLVDMSCR	0xFF872120
+#define MXT_VSP1SLVDMSCR	0xFF872124
+#define MXT_VSPD0SLVDMSCR	0xFF872128
+#define MXT_VSPD1SLVDMSCR	0xFF87212C
+#define MXT_MAP1SLVDMSCR	0xFF872130
+#define MXT_MAP2SLVDMSCR	0xFF872134
+
+#define CCI_AXI_MMUS0DMSCR	0xFF882000
+#define CCI_AXI_SYX2DMSCR	0xFF882004
+#define CCI_AXI_MMURDMSCR	0xFF882008
+#define CCI_AXI_MMUDSDMSCR	0xFF88200C
+#define CCI_AXI_MMUMDMSCR	0xFF882010
+#define CCI_AXI_MXIDMSCR	0xFF882014
+#define CCI_AXI_MMUS1DMSCR	0xFF882018
+#define CCI_AXI_MMUMPDMSCR	0xFF88201C
+#define CCI_AXI_DVMDMSCR	0xFF882020
+#define CCI_AXI_CCISLVDMSCR	0xFF882100
+
+#define CCI_AXI_IPMMUIDVMCR	0xFF880400
+#define CCI_AXI_IPMMURDVMCR	0xFF880404
+#define CCI_AXI_IPMMUS0DVMCR	0xFF880408
+#define CCI_AXI_IPMMUS1DVMCR	0xFF88040C
+#define CCI_AXI_IPMMUMPDVMCR	0xFF880410
+#define CCI_AXI_IPMMUDSDVMCR	0xFF880414
+#define CCI_AXI_AX2ADDRMASK	0xFF88041C
+
+#ifndef __ASSEMBLY__
+#include <asm/types.h>
+
+/* RWDT */
+struct r8a7790_rwdt {
+	u32 rwtcnt;	/* 0x00 */
+	u32 rwtcsra;	/* 0x04 */
+	u16 rwtcsrb;	/* 0x08 */
+};
+
+/* SWDT */
+struct r8a7790_swdt {
+	u32 swtcnt;	/* 0x00 */
+	u32 swtcsra;	/* 0x04 */
+	u16 swtcsrb;	/* 0x08 */
+};
+
+/* LBSC */
+struct r8a7790_lbsc {
+	u32 cs0ctrl;
+	u32 cs1ctrl;
+	u32 ecs0ctrl;
+	u32 ecs1ctrl;
+	u32 ecs2ctrl;
+	u32 ecs3ctrl;
+	u32 ecs4ctrl;
+	u32 ecs5ctrl;
+	u32 dummy0[4];	/* 0x20 .. 0x2C */
+	u32 cswcr0;
+	u32 cswcr1;
+	u32 ecswcr0;
+	u32 ecswcr1;
+	u32 ecswcr2;
+	u32 ecswcr3;
+	u32 ecswcr4;
+	u32 ecswcr5;
+	u32 exdmawcr0;
+	u32 exdmawcr1;
+	u32 exdmawcr2;
+	u32 dummy1[9];	/* 0x5C .. 0x7C */
+	u32 cspwcr0;
+	u32 cspwcr1;
+	u32 ecspwcr0;
+	u32 ecspwcr1;
+	u32 ecspwcr2;
+	u32 ecspwcr3;
+	u32 ecspwcr4;
+	u32 ecspwcr5;
+	u32 exwtsync;
+	u32 dummy2[3];	/* 0xA4 .. 0xAC */
+	u32 cs0bstctl;
+	u32 cs0btph;
+	u32 dummy3[2];	/* 0xB8 .. 0xBC */
+	u32 cs1gdst;
+	u32 ecs0gdst;
+	u32 ecs1gdst;
+	u32 ecs2gdst;
+	u32 ecs3gdst;
+	u32 ecs4gdst;
+	u32 ecs5gdst;
+	u32 dummy4[5];	/* 0xDC .. 0xEC */
+	u32 exdmaset0;
+	u32 exdmaset1;
+	u32 exdmaset2;
+	u32 dummy5[5];	/* 0xFC .. 0x10C */
+	u32 exdmcr0;
+	u32 exdmcr1;
+	u32 exdmcr2;
+	u32 dummy6[5];	/* 0x11C .. 0x12C */
+	u32 bcintsr;
+	u32 bcintcr;
+	u32 bcintmr;
+	u32 dummy7;	/* 0x13C */
+	u32 exbatlv;
+	u32 exwtsts;
+	u32 dummy8[14];	/* 0x148 .. 0x17C */
+	u32 atacsctrl;
+	u32 dummy9[15]; /* 0x184 .. 0x1BC */
+	u32 exbct;
+	u32 extct;
+};
+
+/* DBSC3 */
+struct r8a7790_dbsc3 {
+	u32 dummy0[3];	/* 0x00 .. 0x08 */
+	u32 dbstate1;
+	u32 dbacen;
+	u32 dbrfen;
+	u32 dbcmd;
+	u32 dbwait;
+	u32 dbkind;
+	u32 dbconf0;
+	u32 dummy1[2];	/* 0x28 .. 0x2C */
+	u32 dbphytype;
+	u32 dummy2[3];	/* 0x34 .. 0x3C */
+	u32 dbtr0;
+	u32 dbtr1;
+	u32 dbtr2;
+	u32 dummy3;	/* 0x4C */
+	u32 dbtr3;
+	u32 dbtr4;
+	u32 dbtr5;
+	u32 dbtr6;
+	u32 dbtr7;
+	u32 dbtr8;
+	u32 dbtr9;
+	u32 dbtr10;
+	u32 dbtr11;
+	u32 dbtr12;
+	u32 dbtr13;
+	u32 dbtr14;
+	u32 dbtr15;
+	u32 dbtr16;
+	u32 dbtr17;
+	u32 dbtr18;
+	u32 dbtr19;
+	u32 dummy4[7];	/* 0x94 .. 0xAC */
+	u32 dbbl;
+	u32 dummy5[3];	/* 0xB4 .. 0xBC */
+	u32 dbadj0;
+	u32 dummy6;	/* 0xC4 */
+	u32 dbadj2;
+	u32 dummy7[5];	/* 0xCC .. 0xDC */
+	u32 dbrfcnf0;
+	u32 dbrfcnf1;
+	u32 dbrfcnf2;
+	u32 dummy8[2];	/* 0xEC .. 0xF0 */
+	u32 dbcalcnf;
+	u32 dbcaltr;
+	u32 dummy9;	/* 0xFC */
+	u32 dbrnk0;
+	u32 dummy10[31];	/* 0x104 .. 0x17C */
+	u32 dbpdncnf;
+	u32 dummy11[47];	/* 0x184 ..0x23C */
+	u32 dbdfistat;
+	u32 dbdficnt;
+	u32 dummy12[14];	/* 0x248 .. 0x27C */
+	u32 dbpdlck;
+	u32 dummy13[3];	/* 0x284 .. 0x28C */
+	u32 dbpdrga;
+	u32 dummy14[3];	/* 0x294 .. 0x29C */
+	u32 dbpdrgd;
+	u32 dummy15[24];	/* 0x2A4 .. 0x300 */
+	u32 dbbs0cnt1;
+	u32 dummy16[30];	/* 0x308 .. 0x37C */
+	u32 dbwt0cnf0;
+	u32 dbwt0cnf1;
+	u32 dbwt0cnf2;
+	u32 dbwt0cnf3;
+	u32 dbwt0cnf4;
+};
+
+/* GPIO */
+struct r8a7790_gpio {
+	u32 iointsel;
+	u32 inoutsel;
+	u32 outdt;
+	u32 indt;
+	u32 intdt;
+	u32 intclr;
+	u32 intmsk;
+	u32 posneg;
+	u32 edglevel;
+	u32 filonoff;
+	u32 intmsks;
+	u32 mskclrs;
+	u32 outdtsel;
+	u32 outdth;
+	u32 outdtl;
+	u32 bothedge;
+};
+
+/* S3C(QoS) */
+struct r8a7790_s3c {
+	u32 s3cexcladdmsk;
+	u32 s3cexclidmsk;
+	u32 s3cadsplcr;
+	u32 s3cmaar;
+	u32 s3carcr11;
+	u32 s3crorr;
+	u32 s3cworr;
+	u32 s3carcr22;
+	u32 dummy1[2];	/* 0x20 .. 0x24 */
+	u32 s3cmctr;
+	u32 dummy2;	/* 0x2C */
+	u32 cconf0;
+	u32 cconf1;
+	u32 cconf2;
+	u32 cconf3;
+};
+
+struct r8a7790_s3c_qos {
+	u32 s3cqos0;
+	u32 s3cqos1;
+	u32 s3cqos2;
+	u32 s3cqos3;
+	u32 s3cqos4;
+	u32 s3cqos5;
+	u32 s3cqos6;
+	u32 s3cqos7;
+	u32 s3cqos8;
+};
+
+/* DBSC(QoS) */
+struct r8a7790_dbsc3_qos {
+	u32 dblgcnt;
+	u32 dbtmval0;
+	u32 dbtmval1;
+	u32 dbtmval2;
+	u32 dbtmval3;
+	u32 dbrqctr;
+	u32 dbthres0;
+	u32 dbthres1;
+	u32 dbthres2;
+	u32 dummy0;	/* 0x24 */
+	u32 dblgqon;
+};
+
+/* MXI(QoS) */
+struct r8a7790_mxi {
+	u32 mxsaar0;
+	u32 mxsaar1;
+	u32 dummy0[7];	/* 0x08 .. 0x20 */
+	u32 mxaxiracr;
+	u32 mxs3cracr;
+	u32 dummy1[2];	/* 0x2C .. 0x30 */
+	u32 mxaxiwacr;
+	u32 mxs3cwacr;
+	u32 dummy2;	/* 0x3C */
+	u32 mxrtcr;
+	u32 mxwtcr;
+};
+
+struct r8a7790_mxi_qos {
+	u32 vspdu0;
+	u32 vspdu1;
+	u32 du0;
+	u32 du1;
+};
+
+/* AXI(QoS) */
+struct r8a7790_axi_qos {
+	u32 qosconf;
+	u32 qosctset0;
+	u32 qosctset1;
+	u32 qosctset2;
+	u32 qosctset3;
+	u32 qosreqctr;
+	u32 qosthres0;
+	u32 qosthres1;
+	u32 qosthres2;
+	u32 qosqon;
+};
+
+#endif
+
+#endif /* __ASM_ARCH_R8A7790_H */
diff --git a/arch/arm/include/asm/arch-rmobile/r8a7791-gpio.h b/arch/arm/include/asm/arch-rmobile/r8a7791-gpio.h
new file mode 100644
index 0000000000..d3cf0c10ac
--- /dev/null
+++ b/arch/arm/include/asm/arch-rmobile/r8a7791-gpio.h
@@ -0,0 +1,438 @@
+#ifndef __ASM_R8A7791_H__
+#define __ASM_R8A7791_H__
+
+/* Pin Function Controller:
+ * GPIO_FN_xx - GPIO used to select pin function
+ * GPIO_GP_x_x - GPIO mapped to real I/O pin on CPU
+ */
+enum {
+	GPIO_GP_0_0, GPIO_GP_0_1, GPIO_GP_0_2, GPIO_GP_0_3,
+	GPIO_GP_0_4, GPIO_GP_0_5, GPIO_GP_0_6, GPIO_GP_0_7,
+	GPIO_GP_0_8, GPIO_GP_0_9, GPIO_GP_0_10, GPIO_GP_0_11,
+	GPIO_GP_0_12, GPIO_GP_0_13, GPIO_GP_0_14, GPIO_GP_0_15,
+	GPIO_GP_0_16, GPIO_GP_0_17, GPIO_GP_0_18, GPIO_GP_0_19,
+	GPIO_GP_0_20, GPIO_GP_0_21, GPIO_GP_0_22, GPIO_GP_0_23,
+	GPIO_GP_0_24, GPIO_GP_0_25, GPIO_GP_0_26, GPIO_GP_0_27,
+	GPIO_GP_0_28, GPIO_GP_0_29, GPIO_GP_0_30, GPIO_GP_0_31,
+
+	GPIO_GP_1_0, GPIO_GP_1_1, GPIO_GP_1_2, GPIO_GP_1_3,
+	GPIO_GP_1_4, GPIO_GP_1_5, GPIO_GP_1_6, GPIO_GP_1_7,
+	GPIO_GP_1_8, GPIO_GP_1_9, GPIO_GP_1_10, GPIO_GP_1_11,
+	GPIO_GP_1_12, GPIO_GP_1_13, GPIO_GP_1_14, GPIO_GP_1_15,
+	GPIO_GP_1_16, GPIO_GP_1_17, GPIO_GP_1_18, GPIO_GP_1_19,
+	GPIO_GP_1_20, GPIO_GP_1_21, GPIO_GP_1_22, GPIO_GP_1_23,
+	GPIO_GP_1_24, GPIO_GP_1_25,
+
+	GPIO_GP_2_0, GPIO_GP_2_1, GPIO_GP_2_2, GPIO_GP_2_3,
+	GPIO_GP_2_4, GPIO_GP_2_5, GPIO_GP_2_6, GPIO_GP_2_7,
+	GPIO_GP_2_8, GPIO_GP_2_9, GPIO_GP_2_10, GPIO_GP_2_11,
+	GPIO_GP_2_12, GPIO_GP_2_13, GPIO_GP_2_14, GPIO_GP_2_15,
+	GPIO_GP_2_16, GPIO_GP_2_17, GPIO_GP_2_18, GPIO_GP_2_19,
+	GPIO_GP_2_20, GPIO_GP_2_21, GPIO_GP_2_22, GPIO_GP_2_23,
+	GPIO_GP_2_24, GPIO_GP_2_25, GPIO_GP_2_26, GPIO_GP_2_27,
+	GPIO_GP_2_28, GPIO_GP_2_29, GPIO_GP_2_30, GPIO_GP_2_31,
+
+	GPIO_GP_3_0, GPIO_GP_3_1, GPIO_GP_3_2, GPIO_GP_3_3,
+	GPIO_GP_3_4, GPIO_GP_3_5, GPIO_GP_3_6, GPIO_GP_3_7,
+	GPIO_GP_3_8, GPIO_GP_3_9, GPIO_GP_3_10, GPIO_GP_3_11,
+	GPIO_GP_3_12, GPIO_GP_3_13, GPIO_GP_3_14, GPIO_GP_3_15,
+	GPIO_GP_3_16, GPIO_GP_3_17, GPIO_GP_3_18, GPIO_GP_3_19,
+	GPIO_GP_3_20, GPIO_GP_3_21, GPIO_GP_3_22, GPIO_GP_3_23,
+	GPIO_GP_3_24, GPIO_GP_3_25, GPIO_GP_3_26, GPIO_GP_3_27,
+	GPIO_GP_3_28, GPIO_GP_3_29, GPIO_GP_3_30, GPIO_GP_3_31,
+
+	GPIO_GP_4_0, GPIO_GP_4_1, GPIO_GP_4_2, GPIO_GP_4_3,
+	GPIO_GP_4_4, GPIO_GP_4_5, GPIO_GP_4_6, GPIO_GP_4_7,
+	GPIO_GP_4_8, GPIO_GP_4_9, GPIO_GP_4_10, GPIO_GP_4_11,
+	GPIO_GP_4_12, GPIO_GP_4_13, GPIO_GP_4_14, GPIO_GP_4_15,
+	GPIO_GP_4_16, GPIO_GP_4_17, GPIO_GP_4_18, GPIO_GP_4_19,
+	GPIO_GP_4_20, GPIO_GP_4_21, GPIO_GP_4_22, GPIO_GP_4_23,
+	GPIO_GP_4_24, GPIO_GP_4_25, GPIO_GP_4_26, GPIO_GP_4_27,
+	GPIO_GP_4_28, GPIO_GP_4_29, GPIO_GP_4_30, GPIO_GP_4_31,
+
+	GPIO_GP_5_0, GPIO_GP_5_1, GPIO_GP_5_2, GPIO_GP_5_3,
+	GPIO_GP_5_4, GPIO_GP_5_5, GPIO_GP_5_6, GPIO_GP_5_7,
+	GPIO_GP_5_8, GPIO_GP_5_9, GPIO_GP_5_10, GPIO_GP_5_11,
+	GPIO_GP_5_12, GPIO_GP_5_13, GPIO_GP_5_14, GPIO_GP_5_15,
+	GPIO_GP_5_16, GPIO_GP_5_17, GPIO_GP_5_18, GPIO_GP_5_19,
+	GPIO_GP_5_20, GPIO_GP_5_21, GPIO_GP_5_22, GPIO_GP_5_23,
+	GPIO_GP_5_24, GPIO_GP_5_25, GPIO_GP_5_26, GPIO_GP_5_27,
+	GPIO_GP_5_28, GPIO_GP_5_29, GPIO_GP_5_30, GPIO_GP_5_31,
+
+	GPIO_GP_6_0, GPIO_GP_6_1, GPIO_GP_6_2, GPIO_GP_6_3,
+	GPIO_GP_6_4, GPIO_GP_6_5, GPIO_GP_6_6, GPIO_GP_6_7,
+	GPIO_GP_6_8, GPIO_GP_6_9, GPIO_GP_6_10, GPIO_GP_6_11,
+	GPIO_GP_6_12, GPIO_GP_6_13, GPIO_GP_6_14, GPIO_GP_6_15,
+	GPIO_GP_6_16, GPIO_GP_6_17, GPIO_GP_6_18, GPIO_GP_6_19,
+	GPIO_GP_6_20, GPIO_GP_6_21, GPIO_GP_6_22, GPIO_GP_6_23,
+	GPIO_GP_6_24, GPIO_GP_6_25, GPIO_GP_6_26, GPIO_GP_6_27,
+	GPIO_GP_6_28, GPIO_GP_6_29, GPIO_GP_6_30, GPIO_GP_6_31,
+
+	GPIO_GP_7_0, GPIO_GP_7_1, GPIO_GP_7_2, GPIO_GP_7_3,
+	GPIO_GP_7_4, GPIO_GP_7_5, GPIO_GP_7_6, GPIO_GP_7_7,
+	GPIO_GP_7_8, GPIO_GP_7_9, GPIO_GP_7_10, GPIO_GP_7_11,
+	GPIO_GP_7_12, GPIO_GP_7_13, GPIO_GP_7_14, GPIO_GP_7_15,
+	GPIO_GP_7_16, GPIO_GP_7_17, GPIO_GP_7_18, GPIO_GP_7_19,
+	GPIO_GP_7_20, GPIO_GP_7_21, GPIO_GP_7_22, GPIO_GP_7_23,
+	GPIO_GP_7_24, GPIO_GP_7_25,
+
+	GPIO_FN_EX_CS0_N, GPIO_FN_RD_N, GPIO_FN_AUDIO_CLKA,
+	GPIO_FN_VI0_CLK, GPIO_FN_VI0_DATA0_VI0_B0,
+	GPIO_FN_VI0_DATA0_VI0_B1, GPIO_FN_VI0_DATA0_VI0_B2,
+	GPIO_FN_VI0_DATA0_VI0_B4, GPIO_FN_VI0_DATA0_VI0_B5,
+	GPIO_FN_VI0_DATA0_VI0_B6, GPIO_FN_VI0_DATA0_VI0_B7,
+	GPIO_FN_USB0_PWEN, GPIO_FN_USB0_OVC, GPIO_FN_USB1_PWEN,
+
+	/* IPSR0 */
+	GPIO_FN_D0, GPIO_FN_D1, GPIO_FN_D2, GPIO_FN_D3, GPIO_FN_D4, GPIO_FN_D5,
+	GPIO_FN_D6, GPIO_FN_D7, GPIO_FN_D8, GPIO_FN_D9, GPIO_FN_D10,
+	GPIO_FN_D11, GPIO_FN_D12, GPIO_FN_D13, GPIO_FN_D14, GPIO_FN_D15,
+	GPIO_FN_A0, GPIO_FN_ATAWR0_N_C, GPIO_FN_MSIOF0_SCK_B,
+	GPIO_FN_SCL0_C, GPIO_FN_PWM2_B,
+	GPIO_FN_A1, GPIO_FN_MSIOF0_SYNC_B, GPIO_FN_A2, GPIO_FN_MSIOF0_SS1_B,
+	GPIO_FN_A3, GPIO_FN_MSIOF0_SS2_B, GPIO_FN_A4, GPIO_FN_MSIOF0_TXD_B,
+	GPIO_FN_A5, GPIO_FN_MSIOF0_RXD_B, GPIO_FN_A6, GPIO_FN_MSIOF1_SCK,
+
+	/* IPSR1 */
+	GPIO_FN_A7, GPIO_FN_MSIOF1_SYNC, GPIO_FN_A8,
+	GPIO_FN_MSIOF1_SS1, GPIO_FN_SCL0,
+	GPIO_FN_A9, GPIO_FN_MSIOF1_SS2, GPIO_FN_SDA0,
+	GPIO_FN_A10, GPIO_FN_MSIOF1_TXD, GPIO_FN_MSIOF1_TXD_D,
+	GPIO_FN_A11, GPIO_FN_MSIOF1_RXD, GPIO_FN_SCL3_D, GPIO_FN_MSIOF1_RXD_D,
+	GPIO_FN_A12, GPIO_FN_FMCLK, GPIO_FN_SDA3_D, GPIO_FN_MSIOF1_SCK_D,
+	GPIO_FN_A13, GPIO_FN_ATAG0_N_C, GPIO_FN_BPFCLK, GPIO_FN_MSIOF1_SS1_D,
+	GPIO_FN_A14, GPIO_FN_ATADIR0_N_C, GPIO_FN_FMIN,
+	GPIO_FN_FMIN_C, GPIO_FN_MSIOF1_SYNC_D,
+	GPIO_FN_A15, GPIO_FN_BPFCLK_C,
+	GPIO_FN_A16, GPIO_FN_DREQ2_B, GPIO_FN_FMCLK_C, GPIO_FN_SCIFA1_SCK_B,
+	GPIO_FN_A17, GPIO_FN_DACK2_B, GPIO_FN_SDA0_C,
+	GPIO_FN_A18, GPIO_FN_DREQ1, GPIO_FN_SCIFA1_RXD_C, GPIO_FN_SCIFB1_RXD_C,
+
+	/* IPSR2 */
+	GPIO_FN_A19, GPIO_FN_DACK1, GPIO_FN_SCIFA1_TXD_C,
+	GPIO_FN_SCIFB1_TXD_C, GPIO_FN_SCIFB1_SCK_B,
+	GPIO_FN_A20, GPIO_FN_SPCLK,
+	GPIO_FN_A21, GPIO_FN_ATAWR0_N_B, GPIO_FN_MOSI_IO0,
+	GPIO_FN_A22, GPIO_FN_MISO_IO1, GPIO_FN_FMCLK_B,
+	GPIO_FN_TX0, GPIO_FN_SCIFA0_TXD,
+	GPIO_FN_A23, GPIO_FN_IO2, GPIO_FN_BPFCLK_B,
+	GPIO_FN_RX0, GPIO_FN_SCIFA0_RXD,
+	GPIO_FN_A24, GPIO_FN_DREQ2, GPIO_FN_IO3,
+	GPIO_FN_TX1, GPIO_FN_SCIFA1_TXD,
+	GPIO_FN_A25, GPIO_FN_DACK2, GPIO_FN_SSL, GPIO_FN_DREQ1_C,
+	GPIO_FN_RX1, GPIO_FN_SCIFA1_RXD,
+	GPIO_FN_CS0_N, GPIO_FN_ATAG0_N_B, GPIO_FN_SCL1,
+	GPIO_FN_CS1_N_A26, GPIO_FN_ATADIR0_N_B, GPIO_FN_SDA1,
+	GPIO_FN_EX_CS1_N, GPIO_FN_MSIOF2_SCK,
+	GPIO_FN_EX_CS2_N, GPIO_FN_ATAWR0_N, GPIO_FN_MSIOF2_SYNC,
+	GPIO_FN_EX_CS3_N, GPIO_FN_ATADIR0_N, GPIO_FN_MSIOF2_TXD,
+	GPIO_FN_ATAG0_N, GPIO_FN_EX_WAIT1,
+
+	/* IPSR3 */
+	GPIO_FN_EX_CS4_N, GPIO_FN_ATARD0_N,
+	GPIO_FN_MSIOF2_RXD, GPIO_FN_EX_WAIT2,
+	GPIO_FN_EX_CS5_N, GPIO_FN_ATACS00_N, GPIO_FN_MSIOF2_SS1,
+	GPIO_FN_HRX1_B, GPIO_FN_SCIFB1_RXD_B,
+	GPIO_FN_PWM1, GPIO_FN_TPU_TO1,
+	GPIO_FN_BS_N, GPIO_FN_ATACS10_N, GPIO_FN_MSIOF2_SS2,
+	GPIO_FN_HTX1_B, GPIO_FN_SCIFB1_TXD_B,
+	GPIO_FN_PWM2, GPIO_FN_TPU_TO2,
+	GPIO_FN_RD_WR_N, GPIO_FN_HRX2_B, GPIO_FN_FMIN_B,
+	GPIO_FN_SCIFB0_RXD_B, GPIO_FN_DREQ1_D,
+	GPIO_FN_WE0_N, GPIO_FN_HCTS2_N_B, GPIO_FN_SCIFB0_TXD_B,
+	GPIO_FN_WE1_N, GPIO_FN_ATARD0_N_B,
+	GPIO_FN_HTX2_B, GPIO_FN_SCIFB0_RTS_N_B,
+	GPIO_FN_EX_WAIT0, GPIO_FN_HRTS2_N_B, GPIO_FN_SCIFB0_CTS_N_B,
+	GPIO_FN_DREQ0, GPIO_FN_PWM3, GPIO_FN_TPU_TO3,
+	GPIO_FN_DACK0, GPIO_FN_DRACK0, GPIO_FN_REMOCON,
+	GPIO_FN_SPEEDIN, GPIO_FN_HSCK0_C, GPIO_FN_HSCK2_C,
+	GPIO_FN_SCIFB0_SCK_B, GPIO_FN_SCIFB2_SCK_B,
+	GPIO_FN_DREQ2_C, GPIO_FN_HTX2_D,
+	GPIO_FN_SSI_SCK0129, GPIO_FN_HRX0_C, GPIO_FN_HRX2_C,
+	GPIO_FN_SCIFB0_RXD_C, GPIO_FN_SCIFB2_RXD_C,
+	GPIO_FN_SSI_WS0129, GPIO_FN_HTX0_C, GPIO_FN_HTX2_C,
+	GPIO_FN_SCIFB0_TXD_C, GPIO_FN_SCIFB2_TXD_C,
+
+	/* IPSR4 */
+	GPIO_FN_SSI_SDATA0, GPIO_FN_SCL0_B,
+	GPIO_FN_SCL7_B, GPIO_FN_MSIOF2_SCK_C,
+	GPIO_FN_SSI_SCK1, GPIO_FN_SDA0_B, GPIO_FN_SDA7_B,
+	GPIO_FN_MSIOF2_SYNC_C, GPIO_FN_GLO_I0_D,
+	GPIO_FN_SSI_WS1, GPIO_FN_SCL1_B, GPIO_FN_SCL8_B,
+	GPIO_FN_MSIOF2_TXD_C, GPIO_FN_GLO_I1_D,
+	GPIO_FN_SSI_SDATA1, GPIO_FN_SDA1_B,
+	GPIO_FN_SDA8_B, GPIO_FN_MSIOF2_RXD_C,
+	GPIO_FN_SSI_SCK2, GPIO_FN_SCL2, GPIO_FN_GPS_CLK_B,
+	GPIO_FN_GLO_Q0_D, GPIO_FN_HSCK1_E,
+	GPIO_FN_SSI_WS2, GPIO_FN_SDA2, GPIO_FN_GPS_SIGN_B,
+	GPIO_FN_RX2_E, GPIO_FN_GLO_Q1_D, GPIO_FN_HCTS1_N_E,
+	GPIO_FN_SSI_SDATA2, GPIO_FN_GPS_MAG_B,
+	GPIO_FN_TX2_E, GPIO_FN_HRTS1_N_E,
+	GPIO_FN_SSI_SCK34, GPIO_FN_SSI_WS34, GPIO_FN_SSI_SDATA3,
+	GPIO_FN_SSI_SCK4, GPIO_FN_GLO_SS_D,
+	GPIO_FN_SSI_WS4, GPIO_FN_GLO_RFON_D,
+	GPIO_FN_SSI_SDATA4, GPIO_FN_MSIOF2_SCK_D,
+	GPIO_FN_SSI_SCK5, GPIO_FN_MSIOF1_SCK_C,
+	GPIO_FN_TS_SDATA0, GPIO_FN_GLO_I0,
+	GPIO_FN_MSIOF2_SYNC_D, GPIO_FN_VI1_R2_B,
+
+	/* IPSR5 */
+	GPIO_FN_SSI_WS5, GPIO_FN_MSIOF1_SYNC_C, GPIO_FN_TS_SCK0,
+	GPIO_FN_GLO_I1, GPIO_FN_MSIOF2_TXD_D, GPIO_FN_VI1_R3_B,
+	GPIO_FN_SSI_SDATA5, GPIO_FN_MSIOF1_TXD_C, GPIO_FN_TS_SDEN0,
+	GPIO_FN_GLO_Q0, GPIO_FN_MSIOF2_SS1_D, GPIO_FN_VI1_R4_B,
+	GPIO_FN_SSI_SCK6, GPIO_FN_MSIOF1_RXD_C, GPIO_FN_TS_SPSYNC0,
+	GPIO_FN_GLO_Q1, GPIO_FN_MSIOF2_RXD_D, GPIO_FN_VI1_R5_B,
+	GPIO_FN_SSI_WS6, GPIO_FN_GLO_SCLK,
+	GPIO_FN_MSIOF2_SS2_D, GPIO_FN_VI1_R6_B,
+	GPIO_FN_SSI_SDATA6, GPIO_FN_STP_IVCXO27_0_B,
+	GPIO_FN_GLO_SDATA, GPIO_FN_VI1_R7_B,
+	GPIO_FN_SSI_SCK78, GPIO_FN_STP_ISCLK_0_B, GPIO_FN_GLO_SS,
+	GPIO_FN_SSI_WS78, GPIO_FN_TX0_D, GPIO_FN_STP_ISD_0_B, GPIO_FN_GLO_RFON,
+	GPIO_FN_SSI_SDATA7, GPIO_FN_RX0_D, GPIO_FN_STP_ISEN_0_B,
+	GPIO_FN_SSI_SDATA8, GPIO_FN_TX1_D, GPIO_FN_STP_ISSYNC_0_B,
+	GPIO_FN_SSI_SCK9, GPIO_FN_RX1_D, GPIO_FN_GLO_SCLK_D,
+	GPIO_FN_SSI_WS9, GPIO_FN_TX3_D, GPIO_FN_CAN0_TX_D, GPIO_FN_GLO_SDATA_D,
+	GPIO_FN_SSI_SDATA9, GPIO_FN_RX3_D, GPIO_FN_CAN0_RX_D,
+
+	/* IPSR6 */
+	GPIO_FN_AUDIO_CLKB, GPIO_FN_STP_OPWM_0_B, GPIO_FN_MSIOF1_SCK_B,
+	GPIO_FN_SCIF_CLK, GPIO_FN_BPFCLK_E,
+	GPIO_FN_AUDIO_CLKC, GPIO_FN_SCIFB0_SCK_C, GPIO_FN_MSIOF1_SYNC_B,
+	GPIO_FN_RX2, GPIO_FN_SCIFA2_RXD, GPIO_FN_FMIN_E,
+	GPIO_FN_AUDIO_CLKOUT, GPIO_FN_MSIOF1_SS1_B,
+	GPIO_FN_TX2, GPIO_FN_SCIFA2_TXD,
+	GPIO_FN_IRQ0, GPIO_FN_SCIFB1_RXD_D, GPIO_FN_INTC_IRQ0_N,
+	GPIO_FN_IRQ1, GPIO_FN_SCIFB1_SCK_C, GPIO_FN_INTC_IRQ1_N,
+	GPIO_FN_IRQ2, GPIO_FN_SCIFB1_TXD_D, GPIO_FN_INTC_IRQ2_N,
+	GPIO_FN_IRQ3, GPIO_FN_SCL4_C,
+	GPIO_FN_MSIOF2_TXD_E, GPIO_FN_INTC_IRQ3_N,
+	GPIO_FN_IRQ4, GPIO_FN_HRX1_C, GPIO_FN_SDA4_C,
+	GPIO_FN_MSIOF2_RXD_E, GPIO_FN_INTC_IRQ4_N,
+	GPIO_FN_IRQ5, GPIO_FN_HTX1_C, GPIO_FN_SCL1_E, GPIO_FN_MSIOF2_SCK_E,
+	GPIO_FN_IRQ6, GPIO_FN_HSCK1_C, GPIO_FN_MSIOF1_SS2_B,
+	GPIO_FN_SDA1_E, GPIO_FN_MSIOF2_SYNC_E,
+	GPIO_FN_IRQ7, GPIO_FN_HCTS1_N_C, GPIO_FN_MSIOF1_TXD_B,
+	GPIO_FN_GPS_CLK_C, GPIO_FN_GPS_CLK_D,
+	GPIO_FN_IRQ8, GPIO_FN_HRTS1_N_C, GPIO_FN_MSIOF1_RXD_B,
+	GPIO_FN_GPS_SIGN_C, GPIO_FN_GPS_SIGN_D,
+
+	/* IPSR7 */
+	GPIO_FN_IRQ9, GPIO_FN_DU1_DOTCLKIN_B, GPIO_FN_CAN_CLK_D,
+	GPIO_FN_GPS_MAG_C, GPIO_FN_SCIF_CLK_B, GPIO_FN_GPS_MAG_D,
+	GPIO_FN_DU1_DR0, GPIO_FN_LCDOUT0, GPIO_FN_VI1_DATA0_B, GPIO_FN_TX0_B,
+	GPIO_FN_SCIFA0_TXD_B, GPIO_FN_MSIOF2_SCK_B,
+	GPIO_FN_DU1_DR1, GPIO_FN_LCDOUT1, GPIO_FN_VI1_DATA1_B, GPIO_FN_RX0_B,
+	GPIO_FN_SCIFA0_RXD_B, GPIO_FN_MSIOF2_SYNC_B,
+	GPIO_FN_DU1_DR2, GPIO_FN_LCDOUT2, GPIO_FN_SSI_SCK0129_B,
+	GPIO_FN_DU1_DR3, GPIO_FN_LCDOUT3, GPIO_FN_SSI_WS0129_B,
+	GPIO_FN_DU1_DR4, GPIO_FN_LCDOUT4, GPIO_FN_SSI_SDATA0_B,
+	GPIO_FN_DU1_DR5, GPIO_FN_LCDOUT5, GPIO_FN_SSI_SCK1_B,
+	GPIO_FN_DU1_DR6, GPIO_FN_LCDOUT6, GPIO_FN_SSI_WS1_B,
+	GPIO_FN_DU1_DR7, GPIO_FN_LCDOUT7, GPIO_FN_SSI_SDATA1_B,
+	GPIO_FN_DU1_DG0, GPIO_FN_LCDOUT8, GPIO_FN_VI1_DATA2_B, GPIO_FN_TX1_B,
+	GPIO_FN_SCIFA1_TXD_B, GPIO_FN_MSIOF2_SS1_B,
+	GPIO_FN_DU1_DG1, GPIO_FN_LCDOUT9, GPIO_FN_VI1_DATA3_B, GPIO_FN_RX1_B,
+	GPIO_FN_SCIFA1_RXD_B, GPIO_FN_MSIOF2_SS2_B,
+	GPIO_FN_DU1_DG2, GPIO_FN_LCDOUT10, GPIO_FN_VI1_DATA4_B,
+	GPIO_FN_SCIF1_SCK_B, GPIO_FN_SCIFA1_SCK, GPIO_FN_SSI_SCK78_B,
+
+	/* IPSR8 */
+	GPIO_FN_DU1_DG3, GPIO_FN_LCDOUT11,
+	GPIO_FN_VI1_DATA5_B, GPIO_FN_SSI_WS78_B,
+	GPIO_FN_DU1_DG4, GPIO_FN_LCDOUT12, GPIO_FN_VI1_DATA6_B,
+	GPIO_FN_HRX0_B, GPIO_FN_SCIFB2_RXD_B, GPIO_FN_SSI_SDATA7_B,
+	GPIO_FN_DU1_DG5, GPIO_FN_LCDOUT13, GPIO_FN_VI1_DATA7_B,
+	GPIO_FN_HCTS0_N_B, GPIO_FN_SCIFB2_TXD_B, GPIO_FN_SSI_SDATA8_B,
+	GPIO_FN_DU1_DG6, GPIO_FN_LCDOUT14, GPIO_FN_HRTS0_N_B,
+	GPIO_FN_SCIFB2_CTS_N_B, GPIO_FN_SSI_SCK9_B,
+	GPIO_FN_DU1_DG7, GPIO_FN_LCDOUT15, GPIO_FN_HTX0_B,
+	GPIO_FN_SCIFB2_RTS_N_B, GPIO_FN_SSI_WS9_B,
+	GPIO_FN_DU1_DB0, GPIO_FN_LCDOUT16, GPIO_FN_VI1_CLK_B, GPIO_FN_TX2_B,
+	GPIO_FN_SCIFA2_TXD_B, GPIO_FN_MSIOF2_TXD_B,
+	GPIO_FN_DU1_DB1, GPIO_FN_LCDOUT17, GPIO_FN_VI1_HSYNC_N_B,
+	GPIO_FN_RX2_B, GPIO_FN_SCIFA2_RXD_B, GPIO_FN_MSIOF2_RXD_B,
+	GPIO_FN_DU1_DB2, GPIO_FN_LCDOUT18, GPIO_FN_VI1_VSYNC_N_B,
+	GPIO_FN_SCIF2_SCK_B, GPIO_FN_SCIFA2_SCK, GPIO_FN_SSI_SDATA9_B,
+	GPIO_FN_DU1_DB3, GPIO_FN_LCDOUT19, GPIO_FN_VI1_CLKENB_B,
+	GPIO_FN_DU1_DB4, GPIO_FN_LCDOUT20,
+	GPIO_FN_VI1_FIELD_B, GPIO_FN_CAN1_RX,
+	GPIO_FN_DU1_DB5, GPIO_FN_LCDOUT21, GPIO_FN_TX3,
+	GPIO_FN_SCIFA3_TXD, GPIO_FN_CAN1_TX,
+
+	/* IPSR9 */
+	GPIO_FN_DU1_DB6, GPIO_FN_LCDOUT22, GPIO_FN_SCL3_C,
+	GPIO_FN_RX3, GPIO_FN_SCIFA3_RXD,
+	GPIO_FN_DU1_DB7, GPIO_FN_LCDOUT23, GPIO_FN_SDA3_C,
+	GPIO_FN_SCIF3_SCK, GPIO_FN_SCIFA3_SCK,
+	GPIO_FN_DU1_DOTCLKIN, GPIO_FN_QSTVA_QVS,
+	GPIO_FN_DU1_DOTCLKOUT0, GPIO_FN_QCLK,
+	GPIO_FN_DU1_DOTCLKOUT1, GPIO_FN_QSTVB_QVE, GPIO_FN_CAN0_TX,
+	GPIO_FN_TX3_B, GPIO_FN_SCL2_B, GPIO_FN_PWM4,
+	GPIO_FN_DU1_EXHSYNC_DU1_HSYNC, GPIO_FN_QSTH_QHS,
+	GPIO_FN_DU1_EXVSYNC_DU1_VSYNC, GPIO_FN_QSTB_QHE,
+	GPIO_FN_DU1_EXODDF_DU1_ODDF_DISP_CDE, GPIO_FN_QCPV_QDE,
+	GPIO_FN_CAN0_RX, GPIO_FN_RX3_B, GPIO_FN_SDA2_B,
+	GPIO_FN_DU1_DISP, GPIO_FN_QPOLA,
+	GPIO_FN_DU1_CDE, GPIO_FN_QPOLB, GPIO_FN_PWM4_B,
+	GPIO_FN_VI0_CLKENB, GPIO_FN_TX4,
+	GPIO_FN_SCIFA4_TXD, GPIO_FN_TS_SDATA0_D,
+	GPIO_FN_VI0_FIELD, GPIO_FN_RX4, GPIO_FN_SCIFA4_RXD, GPIO_FN_TS_SCK0_D,
+	GPIO_FN_VI0_HSYNC_N, GPIO_FN_TX5,
+	GPIO_FN_SCIFA5_TXD, GPIO_FN_TS_SDEN0_D,
+	GPIO_FN_VI0_VSYNC_N, GPIO_FN_RX5,
+	GPIO_FN_SCIFA5_RXD, GPIO_FN_TS_SPSYNC0_D,
+	GPIO_FN_VI0_DATA3_VI0_B3, GPIO_FN_SCIF3_SCK_B, GPIO_FN_SCIFA3_SCK_B,
+	GPIO_FN_VI0_G0, GPIO_FN_SCL8, GPIO_FN_STP_IVCXO27_0_C, GPIO_FN_SCL4,
+	GPIO_FN_HCTS2_N, GPIO_FN_SCIFB2_CTS_N, GPIO_FN_ATAWR1_N,
+
+	/* IPSR10 */
+	GPIO_FN_VI0_G1, GPIO_FN_SDA8, GPIO_FN_STP_ISCLK_0_C, GPIO_FN_SDA4,
+	GPIO_FN_HRTS2_N, GPIO_FN_SCIFB2_RTS_N, GPIO_FN_ATADIR1_N,
+	GPIO_FN_VI0_G2, GPIO_FN_VI2_HSYNC_N, GPIO_FN_STP_ISD_0_C,
+	GPIO_FN_SCL3_B, GPIO_FN_HSCK2, GPIO_FN_SCIFB2_SCK, GPIO_FN_ATARD1_N,
+	GPIO_FN_VI0_G3, GPIO_FN_VI2_VSYNC_N, GPIO_FN_STP_ISEN_0_C,
+	GPIO_FN_SDA3_B, GPIO_FN_HRX2, GPIO_FN_SCIFB2_RXD, GPIO_FN_ATACS01_N,
+	GPIO_FN_VI0_G4, GPIO_FN_VI2_CLKENB, GPIO_FN_STP_ISSYNC_0_C,
+	GPIO_FN_HTX2, GPIO_FN_SCIFB2_TXD, GPIO_FN_SCIFB0_SCK_D,
+	GPIO_FN_VI0_G5, GPIO_FN_VI2_FIELD, GPIO_FN_STP_OPWM_0_C,
+	GPIO_FN_FMCLK_D, GPIO_FN_CAN0_TX_E,
+	GPIO_FN_HTX1_D, GPIO_FN_SCIFB0_TXD_D,
+	GPIO_FN_VI0_G6, GPIO_FN_VI2_CLK, GPIO_FN_BPFCLK_D,
+	GPIO_FN_VI0_G7, GPIO_FN_VI2_DATA0, GPIO_FN_FMIN_D,
+	GPIO_FN_VI0_R0, GPIO_FN_VI2_DATA1, GPIO_FN_GLO_I0_B,
+	GPIO_FN_TS_SDATA0_C, GPIO_FN_ATACS11_N,
+	GPIO_FN_VI0_R1, GPIO_FN_VI2_DATA2, GPIO_FN_GLO_I1_B,
+	GPIO_FN_TS_SCK0_C, GPIO_FN_ATAG1_N,
+	GPIO_FN_VI0_R2, GPIO_FN_VI2_DATA3,
+	GPIO_FN_GLO_Q0_B, GPIO_FN_TS_SDEN0_C,
+	GPIO_FN_VI0_R3, GPIO_FN_VI2_DATA4,
+	GPIO_FN_GLO_Q1_B, GPIO_FN_TS_SPSYNC0_C,
+	GPIO_FN_VI0_R4, GPIO_FN_VI2_DATA5, GPIO_FN_GLO_SCLK_B,
+	GPIO_FN_TX0_C, GPIO_FN_SCL1_D,
+
+	/* IPSR11 */
+	GPIO_FN_VI0_R5, GPIO_FN_VI2_DATA6, GPIO_FN_GLO_SDATA_B,
+	GPIO_FN_RX0_C, GPIO_FN_SDA1_D,
+	GPIO_FN_VI0_R6, GPIO_FN_VI2_DATA7, GPIO_FN_GLO_SS_B,
+	GPIO_FN_TX1_C, GPIO_FN_SCL4_B,
+	GPIO_FN_VI0_R7, GPIO_FN_GLO_RFON_B, GPIO_FN_RX1_C, GPIO_FN_CAN0_RX_E,
+	GPIO_FN_SDA4_B, GPIO_FN_HRX1_D, GPIO_FN_SCIFB0_RXD_D,
+	GPIO_FN_VI1_HSYNC_N, GPIO_FN_AVB_RXD0, GPIO_FN_TS_SDATA0_B,
+	GPIO_FN_TX4_B, GPIO_FN_SCIFA4_TXD_B,
+	GPIO_FN_VI1_VSYNC_N, GPIO_FN_AVB_RXD1, GPIO_FN_TS_SCK0_B,
+	GPIO_FN_RX4_B, GPIO_FN_SCIFA4_RXD_B,
+	GPIO_FN_VI1_CLKENB, GPIO_FN_AVB_RXD2, GPIO_FN_TS_SDEN0_B,
+	GPIO_FN_VI1_FIELD, GPIO_FN_AVB_RXD3, GPIO_FN_TS_SPSYNC0_B,
+	GPIO_FN_VI1_CLK, GPIO_FN_AVB_RXD4, GPIO_FN_VI1_DATA0, GPIO_FN_AVB_RXD5,
+	GPIO_FN_VI1_DATA1, GPIO_FN_AVB_RXD6,
+	GPIO_FN_VI1_DATA2, GPIO_FN_AVB_RXD7,
+	GPIO_FN_VI1_DATA3, GPIO_FN_AVB_RX_ER,
+	GPIO_FN_VI1_DATA4, GPIO_FN_AVB_MDIO,
+	GPIO_FN_VI1_DATA5, GPIO_FN_AVB_RX_DV,
+	GPIO_FN_VI1_DATA6, GPIO_FN_AVB_MAGIC,
+	GPIO_FN_VI1_DATA7, GPIO_FN_AVB_MDC,
+	GPIO_FN_ETH_MDIO, GPIO_FN_AVB_RX_CLK, GPIO_FN_SCL2_C,
+	GPIO_FN_ETH_CRS_DV, GPIO_FN_AVB_LINK, GPIO_FN_SDA2_C,
+
+	/* IPSR12 */
+	GPIO_FN_ETH_RX_ER, GPIO_FN_AVB_CRS, GPIO_FN_SCL3, GPIO_FN_SCL7,
+	GPIO_FN_ETH_RXD0, GPIO_FN_AVB_PHY_INT, GPIO_FN_SDA3, GPIO_FN_SDA7,
+	GPIO_FN_ETH_RXD1, GPIO_FN_AVB_GTXREFCLK, GPIO_FN_CAN0_TX_C,
+	GPIO_FN_SCL2_D, GPIO_FN_MSIOF1_RXD_E,
+	GPIO_FN_ETH_LINK, GPIO_FN_AVB_TXD0, GPIO_FN_CAN0_RX_C,
+	GPIO_FN_SDA2_D, GPIO_FN_MSIOF1_SCK_E,
+	GPIO_FN_ETH_REFCLK, GPIO_FN_AVB_TXD1, GPIO_FN_SCIFA3_RXD_B,
+	GPIO_FN_CAN1_RX_C, GPIO_FN_MSIOF1_SYNC_E,
+	GPIO_FN_ETH_TXD1, GPIO_FN_AVB_TXD2, GPIO_FN_SCIFA3_TXD_B,
+	GPIO_FN_CAN1_TX_C, GPIO_FN_MSIOF1_TXD_E,
+	GPIO_FN_ETH_TX_EN, GPIO_FN_AVB_TXD3,
+	GPIO_FN_TCLK1_B, GPIO_FN_CAN_CLK_B,
+	GPIO_FN_ETH_MAGIC, GPIO_FN_AVB_TXD4, GPIO_FN_IETX_C,
+	GPIO_FN_ETH_TXD0, GPIO_FN_AVB_TXD5, GPIO_FN_IECLK_C,
+	GPIO_FN_ETH_MDC, GPIO_FN_AVB_TXD6, GPIO_FN_IERX_C,
+	GPIO_FN_STP_IVCXO27_0, GPIO_FN_AVB_TXD7, GPIO_FN_SCIFB2_TXD_D,
+	GPIO_FN_ADIDATA_B, GPIO_FN_MSIOF0_SYNC_C,
+	GPIO_FN_STP_ISCLK_0, GPIO_FN_AVB_TX_EN, GPIO_FN_SCIFB2_RXD_D,
+	GPIO_FN_ADICS_SAMP_B, GPIO_FN_MSIOF0_SCK_C,
+
+	/* IPSR13 */
+	GPIO_FN_STP_ISD_0, GPIO_FN_AVB_TX_ER, GPIO_FN_SCIFB2_SCK_C,
+	GPIO_FN_ADICLK_B, GPIO_FN_MSIOF0_SS1_C,
+	GPIO_FN_STP_ISEN_0, GPIO_FN_AVB_TX_CLK,
+	GPIO_FN_ADICHS0_B, GPIO_FN_MSIOF0_SS2_C,
+	GPIO_FN_STP_ISSYNC_0, GPIO_FN_AVB_COL,
+	GPIO_FN_ADICHS1_B, GPIO_FN_MSIOF0_RXD_C,
+	GPIO_FN_STP_OPWM_0, GPIO_FN_AVB_GTX_CLK, GPIO_FN_PWM0_B,
+	GPIO_FN_ADICHS2_B, GPIO_FN_MSIOF0_TXD_C,
+	GPIO_FN_SD0_CLK, GPIO_FN_SPCLK_B, GPIO_FN_SD0_CMD, GPIO_FN_MOSI_IO0_B,
+	GPIO_FN_SD0_DATA0, GPIO_FN_MISO_IO1_B,
+	GPIO_FN_SD0_DATA1, GPIO_FN_IO2_B,
+	GPIO_FN_SD0_DATA2, GPIO_FN_IO3_B, GPIO_FN_SD0_DATA3, GPIO_FN_SSL_B,
+	GPIO_FN_SD0_CD, GPIO_FN_MMC_D6_B,
+	GPIO_FN_SIM0_RST_B, GPIO_FN_CAN0_RX_F,
+	GPIO_FN_SCIFA5_TXD_B, GPIO_FN_TX3_C,
+	GPIO_FN_SD0_WP, GPIO_FN_MMC_D7_B, GPIO_FN_SIM0_D_B, GPIO_FN_CAN0_TX_F,
+	GPIO_FN_SCIFA5_RXD_B, GPIO_FN_RX3_C,
+	GPIO_FN_SD1_CMD, GPIO_FN_REMOCON_B,
+	GPIO_FN_SD1_DATA0, GPIO_FN_SPEEDIN_B,
+	GPIO_FN_SD1_DATA1, GPIO_FN_IETX_B, GPIO_FN_SD1_DATA2, GPIO_FN_IECLK_B,
+	GPIO_FN_SD1_DATA3, GPIO_FN_IERX_B,
+	GPIO_FN_SD1_CD, GPIO_FN_PWM0, GPIO_FN_TPU_TO0, GPIO_FN_SCL1_C,
+
+	/* IPSR14 */
+	GPIO_FN_SD1_WP, GPIO_FN_PWM1_B, GPIO_FN_SDA1_C,
+	GPIO_FN_SD2_CLK, GPIO_FN_MMC_CLK, GPIO_FN_SD2_CMD, GPIO_FN_MMC_CMD,
+	GPIO_FN_SD2_DATA0, GPIO_FN_MMC_D0, GPIO_FN_SD2_DATA1, GPIO_FN_MMC_D1,
+	GPIO_FN_SD2_DATA2, GPIO_FN_MMC_D2, GPIO_FN_SD2_DATA3, GPIO_FN_MMC_D3,
+	GPIO_FN_SD2_CD, GPIO_FN_MMC_D4, GPIO_FN_SCL8_C,
+	GPIO_FN_TX5_B, GPIO_FN_SCIFA5_TXD_C,
+	GPIO_FN_SD2_WP, GPIO_FN_MMC_D5, GPIO_FN_SDA8_C,
+	GPIO_FN_RX5_B, GPIO_FN_SCIFA5_RXD_C,
+	GPIO_FN_MSIOF0_SCK, GPIO_FN_RX2_C, GPIO_FN_ADIDATA,
+	GPIO_FN_VI1_CLK_C, GPIO_FN_VI1_G0_B,
+	GPIO_FN_MSIOF0_SYNC, GPIO_FN_TX2_C, GPIO_FN_ADICS_SAMP,
+	GPIO_FN_VI1_CLKENB_C, GPIO_FN_VI1_G1_B,
+	GPIO_FN_MSIOF0_TXD, GPIO_FN_ADICLK,
+	GPIO_FN_VI1_FIELD_C, GPIO_FN_VI1_G2_B,
+	GPIO_FN_MSIOF0_RXD, GPIO_FN_ADICHS0,
+	GPIO_FN_VI1_DATA0_C, GPIO_FN_VI1_G3_B,
+	GPIO_FN_MSIOF0_SS1, GPIO_FN_MMC_D6, GPIO_FN_ADICHS1, GPIO_FN_TX0_E,
+	GPIO_FN_VI1_HSYNC_N_C, GPIO_FN_SCL7_C, GPIO_FN_VI1_G4_B,
+	GPIO_FN_MSIOF0_SS2, GPIO_FN_MMC_D7, GPIO_FN_ADICHS2, GPIO_FN_RX0_E,
+	GPIO_FN_VI1_VSYNC_N_C, GPIO_FN_SDA7_C, GPIO_FN_VI1_G5_B,
+
+	/* IPSR15 */
+	GPIO_FN_SIM0_RST, GPIO_FN_IETX, GPIO_FN_CAN1_TX_D,
+	GPIO_FN_SIM0_CLK, GPIO_FN_IECLK, GPIO_FN_CAN_CLK_C,
+	GPIO_FN_SIM0_D, GPIO_FN_IERX, GPIO_FN_CAN1_RX_D,
+	GPIO_FN_GPS_CLK, GPIO_FN_DU1_DOTCLKIN_C, GPIO_FN_AUDIO_CLKB_B,
+	GPIO_FN_PWM5_B, GPIO_FN_SCIFA3_TXD_C,
+	GPIO_FN_GPS_SIGN, GPIO_FN_TX4_C, GPIO_FN_SCIFA4_TXD_C, GPIO_FN_PWM5,
+	GPIO_FN_VI1_G6_B, GPIO_FN_SCIFA3_RXD_C,
+	GPIO_FN_GPS_MAG, GPIO_FN_RX4_C, GPIO_FN_SCIFA4_RXD_C, GPIO_FN_PWM6,
+	GPIO_FN_VI1_G7_B, GPIO_FN_SCIFA3_SCK_C,
+	GPIO_FN_HCTS0_N, GPIO_FN_SCIFB0_CTS_N, GPIO_FN_GLO_I0_C,
+	GPIO_FN_TCLK1, GPIO_FN_VI1_DATA1_C,
+	GPIO_FN_HRTS0_N, GPIO_FN_SCIFB0_RTS_N,
+	GPIO_FN_GLO_I1_C, GPIO_FN_VI1_DATA2_C,
+	GPIO_FN_HSCK0, GPIO_FN_SCIFB0_SCK, GPIO_FN_GLO_Q0_C, GPIO_FN_CAN_CLK,
+	GPIO_FN_TCLK2, GPIO_FN_VI1_DATA3_C,
+	GPIO_FN_HRX0, GPIO_FN_SCIFB0_RXD, GPIO_FN_GLO_Q1_C,
+	GPIO_FN_CAN0_RX_B, GPIO_FN_VI1_DATA4_C,
+	GPIO_FN_HTX0, GPIO_FN_SCIFB0_TXD, GPIO_FN_GLO_SCLK_C,
+	GPIO_FN_CAN0_TX_B, GPIO_FN_VI1_DATA5_C,
+
+	/* IPSR16 */
+	GPIO_FN_HRX1, GPIO_FN_SCIFB1_RXD, GPIO_FN_VI1_R0_B,
+	GPIO_FN_GLO_SDATA_C, GPIO_FN_VI1_DATA6_C,
+	GPIO_FN_HTX1, GPIO_FN_SCIFB1_TXD, GPIO_FN_VI1_R1_B,
+	GPIO_FN_GLO_SS_C, GPIO_FN_VI1_DATA7_C,
+	GPIO_FN_HSCK1, GPIO_FN_SCIFB1_SCK, GPIO_FN_MLB_CK, GPIO_FN_GLO_RFON_C,
+	GPIO_FN_HCTS1_N, GPIO_FN_SCIFB1_CTS_N,
+	GPIO_FN_MLB_SIG, GPIO_FN_CAN1_TX_B,
+	GPIO_FN_HRTS1_N, GPIO_FN_SCIFB1_RTS_N,
+	GPIO_FN_MLB_DAT, GPIO_FN_CAN1_RX_B,
+};
+
+#endif /* __ASM_R8A7791_H__ */
diff --git a/arch/arm/include/asm/arch-rmobile/r8a7791.h b/arch/arm/include/asm/arch-rmobile/r8a7791.h
new file mode 100644
index 0000000000..2afda0a62f
--- /dev/null
+++ b/arch/arm/include/asm/arch-rmobile/r8a7791.h
@@ -0,0 +1,664 @@
+/*
+ * arch/arm/include/asm/arch-rmobile/r8a7791.h
+ *
+ * Copyright (C) 2013 Renesas Electronics Corporation
+ *
+ * SPDX-License-Identifier: GPL-2.0
+ */
+
+#ifndef __ASM_ARCH_R8A7791_H
+#define __ASM_ARCH_R8A7791_H
+
+/*
+ * R8A7791 I/O Addresses
+ */
+#define	RWDT_BASE	0xE6020000
+#define	SWDT_BASE	0xE6030000
+#define	LBSC_BASE	0xFEC00200
+#define DBSC3_0_BASE	0xE6790000
+#define DBSC3_1_BASE	0xE67A0000
+#define TMU_BASE	0xE61E0000
+#define	GPIO5_BASE	0xE6055000
+
+#define S3C_BASE	0xE6784000
+#define S3C_INT_BASE	0xE6784A00
+#define S3C_MEDIA_BASE	0xE6784B00
+
+#define S3C_QOS_DCACHE_BASE	0xE6784BDC
+#define S3C_QOS_CCI0_BASE	0xE6784C00
+#define S3C_QOS_CCI1_BASE	0xE6784C24
+#define S3C_QOS_MXI_BASE	0xE6784C48
+#define S3C_QOS_AXI_BASE	0xE6784C6C
+
+#define DBSC3_0_QOS_R0_BASE	0xE6791000
+#define DBSC3_0_QOS_R1_BASE	0xE6791100
+#define DBSC3_0_QOS_R2_BASE	0xE6791200
+#define DBSC3_0_QOS_R3_BASE	0xE6791300
+#define DBSC3_0_QOS_R4_BASE	0xE6791400
+#define DBSC3_0_QOS_R5_BASE	0xE6791500
+#define DBSC3_0_QOS_R6_BASE	0xE6791600
+#define DBSC3_0_QOS_R7_BASE	0xE6791700
+#define DBSC3_0_QOS_R8_BASE	0xE6791800
+#define DBSC3_0_QOS_R9_BASE	0xE6791900
+#define DBSC3_0_QOS_R10_BASE	0xE6791A00
+#define DBSC3_0_QOS_R11_BASE	0xE6791B00
+#define DBSC3_0_QOS_R12_BASE	0xE6791C00
+#define DBSC3_0_QOS_R13_BASE	0xE6791D00
+#define DBSC3_0_QOS_R14_BASE	0xE6791E00
+#define DBSC3_0_QOS_R15_BASE	0xE6791F00
+#define DBSC3_0_QOS_W0_BASE	0xE6792000
+#define DBSC3_0_QOS_W1_BASE	0xE6792100
+#define DBSC3_0_QOS_W2_BASE	0xE6792200
+#define DBSC3_0_QOS_W3_BASE	0xE6792300
+#define DBSC3_0_QOS_W4_BASE	0xE6792400
+#define DBSC3_0_QOS_W5_BASE	0xE6792500
+#define DBSC3_0_QOS_W6_BASE	0xE6792600
+#define DBSC3_0_QOS_W7_BASE	0xE6792700
+#define DBSC3_0_QOS_W8_BASE	0xE6792800
+#define DBSC3_0_QOS_W9_BASE	0xE6792900
+#define DBSC3_0_QOS_W10_BASE	0xE6792A00
+#define DBSC3_0_QOS_W11_BASE	0xE6792B00
+#define DBSC3_0_QOS_W12_BASE	0xE6792C00
+#define DBSC3_0_QOS_W13_BASE	0xE6792D00
+#define DBSC3_0_QOS_W14_BASE	0xE6792E00
+#define DBSC3_0_QOS_W15_BASE	0xE6792F00
+
+#define DBSC3_1_QOS_R0_BASE	0xE67A1000
+#define DBSC3_1_QOS_R1_BASE	0xE67A1100
+#define DBSC3_1_QOS_R2_BASE	0xE67A1200
+#define DBSC3_1_QOS_R3_BASE	0xE67A1300
+#define DBSC3_1_QOS_R4_BASE	0xE67A1400
+#define DBSC3_1_QOS_R5_BASE	0xE67A1500
+#define DBSC3_1_QOS_R6_BASE	0xE67A1600
+#define DBSC3_1_QOS_R7_BASE	0xE67A1700
+#define DBSC3_1_QOS_R8_BASE	0xE67A1800
+#define DBSC3_1_QOS_R9_BASE	0xE67A1900
+#define DBSC3_1_QOS_R10_BASE	0xE67A1A00
+#define DBSC3_1_QOS_R11_BASE	0xE67A1B00
+#define DBSC3_1_QOS_R12_BASE	0xE67A1C00
+#define DBSC3_1_QOS_R13_BASE	0xE67A1D00
+#define DBSC3_1_QOS_R14_BASE	0xE67A1E00
+#define DBSC3_1_QOS_R15_BASE	0xE67A1F00
+#define DBSC3_1_QOS_W0_BASE	0xE67A2000
+#define DBSC3_1_QOS_W1_BASE	0xE67A2100
+#define DBSC3_1_QOS_W2_BASE	0xE67A2200
+#define DBSC3_1_QOS_W3_BASE	0xE67A2300
+#define DBSC3_1_QOS_W4_BASE	0xE67A2400
+#define DBSC3_1_QOS_W5_BASE	0xE67A2500
+#define DBSC3_1_QOS_W6_BASE	0xE67A2600
+#define DBSC3_1_QOS_W7_BASE	0xE67A2700
+#define DBSC3_1_QOS_W8_BASE	0xE67A2800
+#define DBSC3_1_QOS_W9_BASE	0xE67A2900
+#define DBSC3_1_QOS_W10_BASE	0xE67A2A00
+#define DBSC3_1_QOS_W11_BASE	0xE67A2B00
+#define DBSC3_1_QOS_W12_BASE	0xE67A2C00
+#define DBSC3_1_QOS_W13_BASE	0xE67A2D00
+#define DBSC3_1_QOS_W14_BASE	0xE67A2E00
+#define DBSC3_1_QOS_W15_BASE	0xE67A2F00
+
+#define DBSC3_0_DBADJ2		0xE67900C8
+
+#define CCI_400_MAXOT_1		0xF0091110
+#define CCI_400_MAXOT_2		0xF0092110
+#define CCI_400_QOSCNTL_1	0xF009110C
+#define CCI_400_QOSCNTL_2	0xF009210C
+
+#define	MXI_BASE		0xFE960000
+#define	MXI_QOS_BASE		0xFE960300
+
+#define SYS_AXI_SYX64TO128_BASE	0xFF800300
+#define SYS_AXI_AVB_BASE	0xFF800340
+#define SYS_AXI_G2D_BASE	0xFF800540
+#define SYS_AXI_IMP0_BASE	0xFF800580
+#define SYS_AXI_IMP1_BASE	0xFF8005C0
+#define SYS_AXI_IMUX0_BASE	0xFF800600
+#define SYS_AXI_IMUX1_BASE	0xFF800640
+#define SYS_AXI_IMUX2_BASE	0xFF800680
+#define SYS_AXI_LBS_BASE	0xFF8006C0
+#define SYS_AXI_MMUDS_BASE	0xFF800700
+#define SYS_AXI_MMUM_BASE	0xFF800740
+#define SYS_AXI_MMUR_BASE	0xFF800780
+#define SYS_AXI_MMUS0_BASE	0xFF8007C0
+#define SYS_AXI_MMUS1_BASE	0xFF800800
+#define SYS_AXI_MTSB0_BASE	0xFF800880
+#define SYS_AXI_MTSB1_BASE	0xFF8008C0
+#define SYS_AXI_PCI_BASE	0xFF800900
+#define SYS_AXI_RTX_BASE	0xFF800940
+#define SYS_AXI_SDS0_BASE	0xFF800A80
+#define SYS_AXI_SDS1_BASE	0xFF800AC0
+#define SYS_AXI_USB20_BASE	0xFF800C00
+#define SYS_AXI_USB21_BASE	0xFF800C40
+#define SYS_AXI_USB22_BASE	0xFF800C80
+#define SYS_AXI_USB30_BASE	0xFF800CC0
+#define SYS_AXI_AX2M_BASE	0xFF800380
+#define SYS_AXI_CC50_BASE	0xFF8003C0
+#define SYS_AXI_CCI_BASE	0xFF800440
+#define SYS_AXI_CS_BASE		0xFF800480
+#define SYS_AXI_DDM_BASE	0xFF8004C0
+#define SYS_AXI_ETH_BASE	0xFF800500
+#define SYS_AXI_MPXM_BASE	0xFF800840
+#define SYS_AXI_SAT0_BASE	0xFF800980
+#define SYS_AXI_SAT1_BASE	0xFF8009C0
+#define SYS_AXI_SDM0_BASE	0xFF800A00
+#define SYS_AXI_SDM1_BASE	0xFF800A40
+#define SYS_AXI_TRAB_BASE	0xFF800B00
+#define SYS_AXI_UDM0_BASE	0xFF800B80
+#define SYS_AXI_UDM1_BASE	0xFF800BC0
+
+#define RT_AXI_SHX_BASE		0xFF810100
+#define RT_AXI_DBG_BASE		0xFF810140
+#define RT_AXI_RDM_BASE		0xFF810180
+#define RT_AXI_RDS_BASE		0xFF8101C0
+#define RT_AXI_RTX64TO128_BASE	0xFF810200
+#define RT_AXI_STPRO_BASE	0xFF810240
+#define RT_AXI_SY2RT_BASE	0xFF810280
+
+#define MP_AXI_ADSP_BASE	0xFF820100
+#define MP_AXI_ASDS0_BASE	0xFF8201C0
+#define MP_AXI_ASDS1_BASE	0xFF820200
+#define MP_AXI_MLP_BASE		0xFF820240
+#define MP_AXI_MMUMP_BASE	0xFF820280
+#define MP_AXI_SPU_BASE		0xFF8202C0
+#define MP_AXI_SPUC_BASE	0xFF820300
+
+#define SYS_AXI256_AXI128TO256_BASE	0xFF860100
+#define SYS_AXI256_SYX_BASE	0xFF860140
+#define SYS_AXI256_MPX_BASE	0xFF860180
+#define SYS_AXI256_MXI_BASE	0xFF8601C0
+
+#define CCI_AXI_MMUS0_BASE	0xFF880100
+#define CCI_AXI_SYX2_BASE	0xFF880140
+#define CCI_AXI_MMUR_BASE	0xFF880180
+#define CCI_AXI_MMUDS_BASE	0xFF8801C0
+#define CCI_AXI_MMUM_BASE	0xFF880200
+#define CCI_AXI_MXI_BASE	0xFF880240
+#define CCI_AXI_MMUS1_BASE	0xFF880280
+#define CCI_AXI_MMUMP_BASE	0xFF8802C0
+
+#define MEDIA_AXI_MXR_BASE	0xFE960080
+#define MEDIA_AXI_MXW_BASE	0xFE9600C0
+#define MEDIA_AXI_JPR_BASE	0xFE964100
+#define MEDIA_AXI_JPW_BASE	0xFE966100
+#define MEDIA_AXI_GCU0R_BASE	0xFE964140
+#define MEDIA_AXI_GCU0W_BASE	0xFE966140
+#define MEDIA_AXI_GCU1R_BASE	0xFE964180
+#define MEDIA_AXI_GCU1W_BASE	0xFE966180
+#define MEDIA_AXI_TDMR_BASE	0xFE964500
+#define MEDIA_AXI_TDMW_BASE	0xFE966500
+#define MEDIA_AXI_VSP0CR_BASE	0xFE964540
+#define MEDIA_AXI_VSP0CW_BASE	0xFE966540
+#define MEDIA_AXI_VSP1CR_BASE	0xFE964580
+#define MEDIA_AXI_VSP1CW_BASE	0xFE966580
+#define MEDIA_AXI_VSPDU0CR_BASE	0xFE9645C0
+#define MEDIA_AXI_VSPDU0CW_BASE	0xFE9665C0
+#define MEDIA_AXI_VSPDU1CR_BASE	0xFE964600
+#define MEDIA_AXI_VSPDU1CW_BASE	0xFE966600
+#define MEDIA_AXI_VIN0W_BASE	0xFE966900
+#define MEDIA_AXI_VSP0R_BASE	0xFE964D00
+#define MEDIA_AXI_VSP0W_BASE	0xFE966D00
+#define MEDIA_AXI_FDP0R_BASE	0xFE964D40
+#define MEDIA_AXI_FDP0W_BASE	0xFE966D40
+#define MEDIA_AXI_IMSR_BASE	0xFE964D80
+#define MEDIA_AXI_IMSW_BASE	0xFE966D80
+#define MEDIA_AXI_VSP1R_BASE	0xFE965100
+#define MEDIA_AXI_VSP1W_BASE	0xFE967100
+#define MEDIA_AXI_FDP1R_BASE	0xFE965140
+#define MEDIA_AXI_FDP1W_BASE	0xFE967140
+#define MEDIA_AXI_IMRR_BASE	0xFE965180
+#define MEDIA_AXI_IMRW_BASE	0xFE967180
+#define MEDIA_AXI_FDP2R_BASE	0xFE9651C0
+#define MEDIA_AXI_FDP2W_BASE	0xFE966DC0
+#define MEDIA_AXI_VSPD0R_BASE	0xFE965500
+#define MEDIA_AXI_VSPD0W_BASE	0xFE967500
+#define MEDIA_AXI_VSPD1R_BASE	0xFE965540
+#define MEDIA_AXI_VSPD1W_BASE	0xFE967540
+#define MEDIA_AXI_DU0R_BASE	0xFE965580
+#define MEDIA_AXI_DU0W_BASE	0xFE967580
+#define MEDIA_AXI_DU1R_BASE	0xFE9655C0
+#define MEDIA_AXI_DU1W_BASE	0xFE9675C0
+#define MEDIA_AXI_VCP0CR_BASE	0xFE965900
+#define MEDIA_AXI_VCP0CW_BASE	0xFE967900
+#define MEDIA_AXI_VCP0VR_BASE	0xFE965940
+#define MEDIA_AXI_VCP0VW_BASE	0xFE967940
+#define MEDIA_AXI_VPC0R_BASE	0xFE965980
+#define MEDIA_AXI_VCP1CR_BASE	0xFE965D00
+#define MEDIA_AXI_VCP1CW_BASE	0xFE967D00
+#define MEDIA_AXI_VCP1VR_BASE	0xFE965D40
+#define MEDIA_AXI_VCP1VW_BASE	0xFE967D40
+#define MEDIA_AXI_VPC1R_BASE	0xFE965D80
+
+#define SYS_AXI_AVBDMSCR	0xFF802000
+#define SYS_AXI_SYX2DMSCR	0xFF802004
+#define SYS_AXI_CC50DMSCR	0xFF802008
+#define SYS_AXI_CC51DMSCR	0xFF80200C
+#define SYS_AXI_CCIDMSCR	0xFF802010
+#define SYS_AXI_CSDMSCR		0xFF802014
+#define SYS_AXI_DDMDMSCR	0xFF802018
+#define SYS_AXI_ETHDMSCR	0xFF80201C
+#define SYS_AXI_G2DDMSCR	0xFF802020
+#define SYS_AXI_IMP0DMSCR	0xFF802024
+#define SYS_AXI_IMP1DMSCR	0xFF802028
+#define SYS_AXI_LBSDMSCR	0xFF80202C
+#define SYS_AXI_MMUDSDMSCR	0xFF802030
+#define SYS_AXI_MMUMXDMSCR	0xFF802034
+#define SYS_AXI_MMURDDMSCR	0xFF802038
+#define SYS_AXI_MMUS0DMSCR	0xFF80203C
+#define SYS_AXI_MMUS1DMSCR	0xFF802040
+#define SYS_AXI_MPXDMSCR	0xFF802044
+#define SYS_AXI_MTSB0DMSCR	0xFF802048
+#define SYS_AXI_MTSB1DMSCR	0xFF80204C
+#define SYS_AXI_PCIDMSCR	0xFF802050
+#define SYS_AXI_RTXDMSCR	0xFF802054
+#define SYS_AXI_SAT0DMSCR	0xFF802058
+#define SYS_AXI_SAT1DMSCR	0xFF80205C
+#define SYS_AXI_SDM0DMSCR	0xFF802060
+#define SYS_AXI_SDM1DMSCR	0xFF802064
+#define SYS_AXI_SDS0DMSCR	0xFF802068
+#define SYS_AXI_SDS1DMSCR	0xFF80206C
+#define SYS_AXI_ETRABDMSCR	0xFF802070
+#define SYS_AXI_ETRKFDMSCR	0xFF802074
+#define SYS_AXI_UDM0DMSCR	0xFF802078
+#define SYS_AXI_UDM1DMSCR	0xFF80207C
+#define SYS_AXI_USB20DMSCR	0xFF802080
+#define SYS_AXI_USB21DMSCR	0xFF802084
+#define SYS_AXI_USB22DMSCR	0xFF802088
+#define SYS_AXI_USB30DMSCR	0xFF80208C
+#define SYS_AXI_X128TO64SLVDMSCR	0xFF802100
+#define SYS_AXI_X64TO128SLVDMSCR	0xFF802104
+#define SYS_AXI_AVBSLVDMSCR	0xFF802108
+#define SYS_AXI_SYX2SLVDMSCR	0xFF80210C
+#define SYS_AXI_ETHSLVDMSCR	0xFF802110
+#define SYS_AXI_GICSLVDMSCR	0xFF802114
+#define SYS_AXI_IMPSLVDMSCR	0xFF802118
+#define SYS_AXI_IMX0SLVDMSCR	0xFF80211C
+#define SYS_AXI_IMX1SLVDMSCR	0xFF802120
+#define SYS_AXI_IMX2SLVDMSCR	0xFF802124
+#define SYS_AXI_LBSSLVDMSCR	0xFF802128
+#define SYS_AXI_MMC0SLVDMSCR	0xFF80212C
+#define SYS_AXI_MMC1SLVDMSCR	0xFF802130
+#define SYS_AXI_MPXSLVDMSCR	0xFF802134
+#define SYS_AXI_MTSB0SLVDMSCR	0xFF802138
+#define SYS_AXI_MTSB1SLVDMSCR	0xFF80213C
+#define SYS_AXI_MXTSLVDMSCR	0xFF802140
+#define SYS_AXI_PCISLVDMSCR	0xFF802144
+#define SYS_AXI_SYAPBSLVDMSCR	0xFF802148
+#define SYS_AXI_QSAPBSLVDMSCR	0xFF80214C
+#define SYS_AXI_RTXSLVDMSCR	0xFF802150
+#define SYS_AXI_SAT0SLVDMSCR	0xFF802168
+#define SYS_AXI_SAT1SLVDMSCR	0xFF80216C
+#define SYS_AXI_SDAP0SLVDMSCR	0xFF802170
+#define SYS_AXI_SDAP1SLVDMSCR	0xFF802174
+#define SYS_AXI_SDAP2SLVDMSCR	0xFF802178
+#define SYS_AXI_SDAP3SLVDMSCR	0xFF80217C
+#define SYS_AXI_SGXSLVDMSCR	0xFF802180
+#define SYS_AXI_STBSLVDMSCR	0xFF802188
+#define SYS_AXI_STMSLVDMSCR	0xFF80218C
+#define SYS_AXI_TSPL0SLVDMSCR	0xFF802194
+#define SYS_AXI_TSPL1SLVDMSCR	0xFF802198
+#define SYS_AXI_TSPL2SLVDMSCR	0xFF80219C
+#define SYS_AXI_USB20SLVDMSCR	0xFF8021A0
+#define SYS_AXI_USB21SLVDMSCR	0xFF8021A4
+#define SYS_AXI_USB22SLVDMSCR	0xFF8021A8
+#define SYS_AXI_USB30SLVDMSCR	0xFF8021AC
+
+#define RT_AXI_CBMDMSCR		0xFF812000
+#define RT_AXI_DBDMSCR		0xFF812004
+#define RT_AXI_RDMDMSCR		0xFF812008
+#define RT_AXI_RDSDMSCR		0xFF81200C
+#define RT_AXI_STRDMSCR		0xFF812010
+#define RT_AXI_SY2RTDMSCR	0xFF812014
+#define RT_AXI_CBSSLVDMSCR	0xFF812100
+#define RT_AXI_DBSSLVDMSCR	0xFF812104
+#define RT_AXI_RTAP1SLVDMSCR	0xFF812108
+#define RT_AXI_RTAP2SLVDMSCR	0xFF81210C
+#define RT_AXI_RTAP3SLVDMSCR	0xFF812110
+#define RT_AXI_RT2SYSLVDMSCR	0xFF812114
+#define RT_AXI_A128TO64SLVDMSCR	0xFF812118
+#define RT_AXI_A64TO128SLVDMSCR	0xFF81211C
+#define RT_AXI_A64TO128CSLVDMSCR	0xFF812120
+#define RT_AXI_UTLBRSLVDMSCR	0xFF812128
+
+#define MP_AXI_ADSPDMSCR	0xFF822000
+#define MP_AXI_ASDM0DMSCR	0xFF822004
+#define MP_AXI_ASDM1DMSCR	0xFF822008
+#define MP_AXI_ASDS0DMSCR	0xFF82200C
+#define MP_AXI_ASDS1DMSCR	0xFF822010
+#define MP_AXI_MLPDMSCR		0xFF822014
+#define MP_AXI_MMUMPDMSCR	0xFF822018
+#define MP_AXI_SPUDMSCR		0xFF82201C
+#define MP_AXI_SPUCDMSCR	0xFF822020
+#define MP_AXI_SY2MPDMSCR	0xFF822024
+#define MP_AXI_ADSPSLVDMSCR	0xFF822100
+#define MP_AXI_MLMSLVDMSCR	0xFF822104
+#define MP_AXI_MPAP4SLVDMSCR	0xFF822108
+#define MP_AXI_MPAP5SLVDMSCR	0xFF82210C
+#define MP_AXI_MPAP6SLVDMSCR	0xFF822110
+#define MP_AXI_MPAP7SLVDMSCR	0xFF822114
+#define MP_AXI_MP2SYSLVDMSCR	0xFF822118
+#define MP_AXI_MP2SY2SLVDMSCR	0xFF82211C
+#define MP_AXI_MPXAPSLVDMSCR	0xFF822124
+#define MP_AXI_SPUSLVDMSCR	0xFF822128
+#define MP_AXI_UTLBMPSLVDMSCR	0xFF82212C
+
+#define ADM_AXI_ASDM0DMSCR	0xFF842000
+#define ADM_AXI_ASDM1DMSCR	0xFF842004
+#define ADM_AXI_MPAP1SLVDMSCR	0xFF842104
+#define ADM_AXI_MPAP2SLVDMSCR	0xFF842108
+#define ADM_AXI_MPAP3SLVDMSCR	0xFF84210C
+
+#define DM_AXI_RDMDMSCR		0xFF852000
+#define DM_AXI_SDM0DMSCR	0xFF852004
+#define DM_AXI_SDM1DMSCR	0xFF852008
+#define DM_AXI_MMAP0SLVDMSCR	0xFF852100
+#define DM_AXI_MMAP1SLVDMSCR	0xFF852104
+#define DM_AXI_QSPAPSLVDMSCR	0xFF852108
+#define DM_AXI_RAP4SLVDMSCR	0xFF85210C
+#define DM_AXI_RAP5SLVDMSCR	0xFF852110
+#define DM_AXI_SAP4SLVDMSCR	0xFF852114
+#define DM_AXI_SAP5SLVDMSCR	0xFF852118
+#define DM_AXI_SAP6SLVDMSCR	0xFF85211C
+#define DM_AXI_SAP65SLVDMSCR	0xFF852120
+#define DM_AXI_SDAP0SLVDMSCR	0xFF852124
+#define DM_AXI_SDAP1SLVDMSCR	0xFF852128
+#define DM_AXI_SDAP2SLVDMSCR	0xFF85212C
+#define DM_AXI_SDAP3SLVDMSCR	0xFF852130
+
+#define SYS_AXI256_SYXDMSCR	0xFF862000
+#define SYS_AXI256_MPXDMSCR	0xFF862004
+#define SYS_AXI256_MXIDMSCR	0xFF862008
+#define SYS_AXI256_X128TO256SLVDMSCR	0xFF862100
+#define SYS_AXI256_X256TO128SLVDMSCR	0xFF862104
+#define SYS_AXI256_SYXSLVDMSCR	0xFF862108
+#define SYS_AXI256_CCXSLVDMSCR	0xFF86210C
+#define SYS_AXI256_S3CSLVDMSCR	0xFF862110
+
+#define MXT_SYXDMSCR		0xFF872000
+#define MXT_CMM0SLVDMSCR	0xFF872100
+#define MXT_CMM1SLVDMSCR	0xFF872104
+#define MXT_CMM2SLVDMSCR	0xFF872108
+#define MXT_FDPSLVDMSCR		0xFF87210C
+#define MXT_IMRSLVDMSCR		0xFF872110
+#define MXT_VINSLVDMSCR		0xFF872114
+#define MXT_VPC0SLVDMSCR	0xFF872118
+#define MXT_VPC1SLVDMSCR	0xFF87211C
+#define MXT_VSP0SLVDMSCR	0xFF872120
+#define MXT_VSP1SLVDMSCR	0xFF872124
+#define MXT_VSPD0SLVDMSCR	0xFF872128
+#define MXT_VSPD1SLVDMSCR	0xFF87212C
+#define MXT_MAP1SLVDMSCR	0xFF872130
+#define MXT_MAP2SLVDMSCR	0xFF872134
+
+#define CCI_AXI_MMUS0DMSCR	0xFF882000
+#define CCI_AXI_SYX2DMSCR	0xFF882004
+#define CCI_AXI_MMURDMSCR	0xFF882008
+#define CCI_AXI_MMUDSDMSCR	0xFF88200C
+#define CCI_AXI_MMUMDMSCR	0xFF882010
+#define CCI_AXI_MXIDMSCR	0xFF882014
+#define CCI_AXI_MMUS1DMSCR	0xFF882018
+#define CCI_AXI_MMUMPDMSCR	0xFF88201C
+#define CCI_AXI_DVMDMSCR	0xFF882020
+#define CCI_AXI_CCISLVDMSCR	0xFF882100
+
+#define CCI_AXI_IPMMUIDVMCR	0xFF880400
+#define CCI_AXI_IPMMURDVMCR	0xFF880404
+#define CCI_AXI_IPMMUS0DVMCR	0xFF880408
+#define CCI_AXI_IPMMUS1DVMCR	0xFF88040C
+#define CCI_AXI_IPMMUMPDVMCR	0xFF880410
+#define CCI_AXI_IPMMUDSDVMCR	0xFF880414
+#define CCI_AXI_AX2ADDRMASK	0xFF88041C
+
+#ifndef __ASSEMBLY__
+#include <asm/types.h>
+
+/* RWDT */
+struct r8a7791_rwdt {
+	u32 rwtcnt;	/* 0x00 */
+	u32 rwtcsra;	/* 0x04 */
+	u16 rwtcsrb;	/* 0x08 */
+};
+
+/* SWDT */
+struct r8a7791_swdt {
+	u32 swtcnt;	/* 0x00 */
+	u32 swtcsra;	/* 0x04 */
+	u16 swtcsrb;	/* 0x08 */
+};
+
+/* LBSC */
+struct r8a7791_lbsc {
+	u32 cs0ctrl;
+	u32 cs1ctrl;
+	u32 ecs0ctrl;
+	u32 ecs1ctrl;
+	u32 ecs2ctrl;
+	u32 ecs3ctrl;
+	u32 ecs4ctrl;
+	u32 ecs5ctrl;
+	u32 dummy0[4];	/* 0x20 .. 0x2C */
+	u32 cswcr0;
+	u32 cswcr1;
+	u32 ecswcr0;
+	u32 ecswcr1;
+	u32 ecswcr2;
+	u32 ecswcr3;
+	u32 ecswcr4;
+	u32 ecswcr5;
+	u32 exdmawcr0;
+	u32 exdmawcr1;
+	u32 exdmawcr2;
+	u32 dummy1[9];	/* 0x5C .. 0x7C */
+	u32 cspwcr0;
+	u32 cspwcr1;
+	u32 ecspwcr0;
+	u32 ecspwcr1;
+	u32 ecspwcr2;
+	u32 ecspwcr3;
+	u32 ecspwcr4;
+	u32 ecspwcr5;
+	u32 exwtsync;
+	u32 dummy2[3];	/* 0xA4 .. 0xAC */
+	u32 cs0bstctl;
+	u32 cs0btph;
+	u32 dummy3[2];	/* 0xB8 .. 0xBC */
+	u32 cs1gdst;
+	u32 ecs0gdst;
+	u32 ecs1gdst;
+	u32 ecs2gdst;
+	u32 ecs3gdst;
+	u32 ecs4gdst;
+	u32 ecs5gdst;
+	u32 dummy4[5];	/* 0xDC .. 0xEC */
+	u32 exdmaset0;
+	u32 exdmaset1;
+	u32 exdmaset2;
+	u32 dummy5[5];	/* 0xFC .. 0x10C */
+	u32 exdmcr0;
+	u32 exdmcr1;
+	u32 exdmcr2;
+	u32 dummy6[5];	/* 0x11C .. 0x12C */
+	u32 bcintsr;
+	u32 bcintcr;
+	u32 bcintmr;
+	u32 dummy7;	/* 0x13C */
+	u32 exbatlv;
+	u32 exwtsts;
+	u32 dummy8[14];	/* 0x148 .. 0x17C */
+	u32 atacsctrl;
+	u32 dummy9[15]; /* 0x184 .. 0x1BC */
+	u32 exbct;
+	u32 extct;
+};
+
+/* DBSC3 */
+struct r8a7791_dbsc3 {
+	u32 dummy0[3];	/* 0x00 .. 0x08 */
+	u32 dbstate1;
+	u32 dbacen;
+	u32 dbrfen;
+	u32 dbcmd;
+	u32 dbwait;
+	u32 dbkind;
+	u32 dbconf0;
+	u32 dummy1[2];	/* 0x28 .. 0x2C */
+	u32 dbphytype;
+	u32 dummy2[3];	/* 0x34 .. 0x3C */
+	u32 dbtr0;
+	u32 dbtr1;
+	u32 dbtr2;
+	u32 dummy3;	/* 0x4C */
+	u32 dbtr3;
+	u32 dbtr4;
+	u32 dbtr5;
+	u32 dbtr6;
+	u32 dbtr7;
+	u32 dbtr8;
+	u32 dbtr9;
+	u32 dbtr10;
+	u32 dbtr11;
+	u32 dbtr12;
+	u32 dbtr13;
+	u32 dbtr14;
+	u32 dbtr15;
+	u32 dbtr16;
+	u32 dbtr17;
+	u32 dbtr18;
+	u32 dbtr19;
+	u32 dummy4[7];	/* 0x94 .. 0xAC */
+	u32 dbbl;
+	u32 dummy5[3];	/* 0xB4 .. 0xBC */
+	u32 dbadj0;
+	u32 dummy6;	/* 0xC4 */
+	u32 dbadj2;
+	u32 dummy7[5];	/* 0xCC .. 0xDC */
+	u32 dbrfcnf0;
+	u32 dbrfcnf1;
+	u32 dbrfcnf2;
+	u32 dummy8[2];	/* 0xEC .. 0xF0 */
+	u32 dbcalcnf;
+	u32 dbcaltr;
+	u32 dummy9;	/* 0xFC */
+	u32 dbrnk0;
+	u32 dummy10[31];	/* 0x104 .. 0x17C */
+	u32 dbpdncnf;
+	u32 dummy11[47];	/* 0x184 ..0x23C */
+	u32 dbdfistat;
+	u32 dbdficnt;
+	u32 dummy12[14];	/* 0x248 .. 0x27C */
+	u32 dbpdlck;
+	u32 dummy13[3];	/* 0x284 .. 0x28C */
+	u32 dbpdrga;
+	u32 dummy14[3];	/* 0x294 .. 0x29C */
+	u32 dbpdrgd;
+	u32 dummy15[24];	/* 0x2A4 .. 0x300 */
+	u32 dbbs0cnt1;
+	u32 dummy16[30];	/* 0x308 .. 0x37C */
+	u32 dbwt0cnf0;
+	u32 dbwt0cnf1;
+	u32 dbwt0cnf2;
+	u32 dbwt0cnf3;
+	u32 dbwt0cnf4;
+};
+
+/* GPIO */
+struct r8a7791_gpio {
+	u32 iointsel;
+	u32 inoutsel;
+	u32 outdt;
+	u32 indt;
+	u32 intdt;
+	u32 intclr;
+	u32 intmsk;
+	u32 posneg;
+	u32 edglevel;
+	u32 filonoff;
+	u32 intmsks;
+	u32 mskclrs;
+	u32 outdtsel;
+	u32 outdth;
+	u32 outdtl;
+	u32 bothedge;
+};
+
+/* S3C(QoS) */
+struct r8a7791_s3c {
+	u32 s3cexcladdmsk;
+	u32 s3cexclidmsk;
+	u32 s3cadsplcr;
+	u32 s3cmaar;
+	u32 dummy0;	/* 0x10 */
+	u32 s3crorr;
+	u32 s3cworr;
+	u32 s3carcr22;
+	u32 dummy1[2];	/* 0x20 .. 0x24 */
+	u32 s3cmctr;
+	u32 dummy2;	/* 0x2C */
+	u32 cconf0;
+	u32 cconf1;
+	u32 cconf2;
+	u32 cconf3;
+};
+
+struct r8a7791_s3c_qos {
+	u32 s3cqos0;
+	u32 s3cqos1;
+	u32 s3cqos2;
+	u32 s3cqos3;
+	u32 s3cqos4;
+	u32 s3cqos5;
+	u32 s3cqos6;
+	u32 s3cqos7;
+	u32 s3cqos8;
+};
+
+/* DBSC(QoS) */
+struct r8a7791_dbsc3_qos {
+	u32 dblgcnt;
+	u32 dbtmval0;
+	u32 dbtmval1;
+	u32 dbtmval2;
+	u32 dbtmval3;
+	u32 dbrqctr;
+	u32 dbthres0;
+	u32 dbthres1;
+	u32 dbthres2;
+	u32 dummy0;	/* 0x24 */
+	u32 dblgqon;
+};
+
+/* MXI(QoS) */
+struct r8a7791_mxi {
+	u32 mxsaar0;
+	u32 mxsaar1;
+	u32 dummy0[8];	/* 0x08 .. 0x24 */
+	u32 mxs3cracr;
+	u32 dummy1[3];	/* 0x2C .. 0x34 */
+	u32 mxs3cwacr;
+	u32 dummy2;	/* 0x3C */
+	u32 mxrtcr;
+	u32 mxwtcr;
+};
+
+struct r8a7791_mxi_qos {
+	u32 vspdu0;
+	u32 vspdu1;
+	u32 du0;
+	u32 du1;
+};
+
+/* AXI(QoS) */
+struct r8a7791_axi_qos {
+	u32 qosconf;
+	u32 qosctset0;
+	u32 qosctset1;
+	u32 qosctset2;
+	u32 qosctset3;
+	u32 qosreqctr;
+	u32 qosthres0;
+	u32 qosthres1;
+	u32 qosthres2;
+	u32 qosqon;
+};
+
+#endif
+
+#endif /* __ASM_ARCH_R8A7791_H */
diff --git a/arch/arm/include/asm/arch-rmobile/rmobile.h b/arch/arm/include/asm/arch-rmobile/rmobile.h
index ac175617cd..2382565023 100644
--- a/arch/arm/include/asm/arch-rmobile/rmobile.h
+++ b/arch/arm/include/asm/arch-rmobile/rmobile.h
@@ -6,6 +6,10 @@
 #include <asm/arch/sh73a0.h>
 #elif defined(CONFIG_R8A7740)
 #include <asm/arch/r8a7740.h>
+#elif defined(CONFIG_R8A7790)
+#include <asm/arch/r8a7790.h>
+#elif defined(CONFIG_R8A7791)
+#include <asm/arch/r8a7791.h>
 #else
 #error "SOC Name not defined"
 #endif
diff --git a/arch/arm/include/asm/arch-s5pc1xx/mmc.h b/arch/arm/include/asm/arch-s5pc1xx/mmc.h
index 55ff10b23c..dd473c8ecd 100644
--- a/arch/arm/include/asm/arch-s5pc1xx/mmc.h
+++ b/arch/arm/include/asm/arch-s5pc1xx/mmc.h
@@ -55,7 +55,7 @@
 
 int s5p_sdhci_init(u32 regbase, int index, int bus_width);
 
-static inline unsigned int s5p_mmc_init(int index, int bus_width)
+static inline int s5p_mmc_init(int index, int bus_width)
 {
 	unsigned int base = samsung_get_base_mmc() +
 				 (S5P_MMC_DEV_OFFSET * index);
diff --git a/arch/arm/include/asm/arch-socfpga/freeze_controller.h b/arch/arm/include/asm/arch-socfpga/freeze_controller.h
new file mode 100644
index 0000000000..120f20e038
--- /dev/null
+++ b/arch/arm/include/asm/arch-socfpga/freeze_controller.h
@@ -0,0 +1,50 @@
+/*
+ *  Copyright (C) 2013 Altera Corporation <www.altera.com>
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#ifndef	_FREEZE_CONTROLLER_H_
+#define	_FREEZE_CONTROLLER_H_
+
+struct socfpga_freeze_controller {
+	u32	vioctrl;
+	u32	padding[3];
+	u32	hioctrl;
+	u32	src;
+	u32	hwctrl;
+};
+
+#define FREEZE_CHANNEL_NUM		(4)
+
+typedef enum {
+	FREEZE_CTRL_FROZEN = 0,
+	FREEZE_CTRL_THAWED = 1
+} FREEZE_CTRL_CHAN_STATE;
+
+#define SYSMGR_FRZCTRL_ADDRESS 0x40
+#define SYSMGR_FRZCTRL_SRC_VIO1_ENUM_SW 0x0
+#define SYSMGR_FRZCTRL_SRC_VIO1_ENUM_HW 0x1
+#define SYSMGR_FRZCTRL_VIOCTRL_SLEW_MASK 0x00000010
+#define SYSMGR_FRZCTRL_VIOCTRL_WKPULLUP_MASK 0x00000008
+#define SYSMGR_FRZCTRL_VIOCTRL_TRISTATE_MASK 0x00000004
+#define SYSMGR_FRZCTRL_VIOCTRL_BUSHOLD_MASK 0x00000002
+#define SYSMGR_FRZCTRL_VIOCTRL_CFG_MASK 0x00000001
+#define SYSMGR_FRZCTRL_HIOCTRL_SLEW_MASK 0x00000010
+#define SYSMGR_FRZCTRL_HIOCTRL_WKPULLUP_MASK 0x00000008
+#define SYSMGR_FRZCTRL_HIOCTRL_TRISTATE_MASK 0x00000004
+#define SYSMGR_FRZCTRL_HIOCTRL_BUSHOLD_MASK 0x00000002
+#define SYSMGR_FRZCTRL_HIOCTRL_CFG_MASK 0x00000001
+#define SYSMGR_FRZCTRL_HIOCTRL_REGRST_MASK 0x00000080
+#define SYSMGR_FRZCTRL_HIOCTRL_OCTRST_MASK 0x00000040
+#define SYSMGR_FRZCTRL_HIOCTRL_OCT_CFGEN_CALSTART_MASK 0x00000100
+#define SYSMGR_FRZCTRL_HIOCTRL_DLLRST_MASK 0x00000020
+#define SYSMGR_FRZCTRL_HWCTRL_VIO1REQ_MASK 0x00000001
+#define SYSMGR_FRZCTRL_HWCTRL_VIO1STATE_ENUM_FROZEN 0x2
+#define SYSMGR_FRZCTRL_HWCTRL_VIO1STATE_ENUM_THAWED 0x1
+#define SYSMGR_FRZCTRL_VIOCTRL_SHIFT 0x2
+
+void sys_mgr_frzctrl_freeze_req(void);
+void sys_mgr_frzctrl_thaw_req(void);
+
+#endif /* _FREEZE_CONTROLLER_H_ */
diff --git a/arch/arm/include/asm/emif.h b/arch/arm/include/asm/emif.h
index 1b94a99c54..d9d521a515 100644
--- a/arch/arm/include/asm/emif.h
+++ b/arch/arm/include/asm/emif.h
@@ -581,7 +581,6 @@
 	(0xFF << EMIF_SYS_ADDR_SHIFT))
 
 #define EMIF_EXT_PHY_CTRL_TIMING_REG	0x5
-#define EMIF_EXT_PHY_CTRL_CONST_REG	0x14
 
 /* Reg mapping structure */
 struct emif_reg_struct {
@@ -641,7 +640,9 @@ struct emif_reg_struct {
 	u32 emif_ddr_phy_ctrl_2;
 	u32 padding7[12];
 	u32 emif_rd_wr_exec_thresh;
-	u32 padding8[55];
+	u32 padding8[7];
+	u32 emif_ddr_phy_status[21];
+	u32 padding9[27];
 	u32 emif_ddr_ext_phy_ctrl_1;
 	u32 emif_ddr_ext_phy_ctrl_1_shdw;
 	u32 emif_ddr_ext_phy_ctrl_2;
@@ -690,6 +691,9 @@ struct emif_reg_struct {
 	u32 emif_ddr_ext_phy_ctrl_23_shdw;
 	u32 emif_ddr_ext_phy_ctrl_24;
 	u32 emif_ddr_ext_phy_ctrl_24_shdw;
+	u32 padding[22];
+	u32 emif_ddr_fifo_misaligned_clear_1;
+	u32 emif_ddr_fifo_misaligned_clear_2;
 };
 
 struct dmm_lisa_map_regs {
@@ -1139,6 +1143,11 @@ struct lpddr2_mr_regs {
 	s8 mr16;
 };
 
+struct read_write_regs {
+	u32 read_reg;
+	u32 write_reg;
+};
+
 /* assert macros */
 #if defined(DEBUG)
 #define emif_assert(c)	({ if (!(c)) for (;;); })
@@ -1167,4 +1176,5 @@ extern u32 *const T_den;
 
 void config_data_eye_leveling_samples(u32 emif_base);
 u32 emif_sdram_type(void);
+const struct read_write_regs *get_bug_regs(u32 *iterations);
 #endif
diff --git a/arch/arm/include/asm/omap_common.h b/arch/arm/include/asm/omap_common.h
index 8a395e8a13..a78f99079b 100644
--- a/arch/arm/include/asm/omap_common.h
+++ b/arch/arm/include/asm/omap_common.h
@@ -226,6 +226,7 @@ struct prcm_regs {
 	u32 cm_l3init_hsusbotg_clkctrl;
 	u32 cm_l3init_hsusbtll_clkctrl;
 	u32 cm_l3init_p1500_clkctrl;
+	u32 cm_l3init_sata_clkctrl;
 	u32 cm_l3init_fsusb_clkctrl;
 	u32 cm_l3init_ocp2scp1_clkctrl;
 	u32 cm_l3init_ocp2scp3_clkctrl;
@@ -366,6 +367,7 @@ struct omap_sys_ctrl_regs {
 	u32 control_ldosram_mpu_voltage_ctrl;
 	u32 control_ldosram_core_voltage_ctrl;
 	u32 control_usbotghs_ctrl;
+	u32 control_phy_power_sata;
 	u32 control_padconf_core_base;
 	u32 control_paconf_global;
 	u32 control_paconf_mode;
@@ -605,6 +607,14 @@ static inline u8 is_omap54xx(void)
 	extern u32 *const omap_si_rev;
 	return ((*omap_si_rev & 0xFF000000) == OMAP54xx);
 }
+
+#define DRA7XX		0x07000000
+
+static inline u8 is_dra7xx(void)
+{
+	extern u32 *const omap_si_rev;
+	return ((*omap_si_rev & 0xFF000000) == DRA7XX);
+}
 #endif
 
 /*
diff --git a/board/BuS/vl_ma2sc/vl_ma2sc.c b/board/BuS/vl_ma2sc/vl_ma2sc.c
index e2ae6fde6c..63f7ad9a7a 100644
--- a/board/BuS/vl_ma2sc/vl_ma2sc.c
+++ b/board/BuS/vl_ma2sc/vl_ma2sc.c
@@ -10,13 +10,13 @@
 #include <common.h>
 #include <asm/sizes.h>
 #include <asm/io.h>
+#include <asm/gpio.h>
 #include <asm/arch/hardware.h>
 #include <asm/arch/clk.h>
 #include <asm/arch/at91_matrix.h>
 #include <asm/arch/at91sam9_smc.h>
 #include <asm/arch/at91_pmc.h>
 #include <asm/arch/at91_pio.h>
-#include <asm/arch/at91_rstc.h>
 #include <asm/arch/at91sam9263.h>
 #include <asm/arch/gpio.h>
 #include <asm/arch/at91_common.h>
@@ -66,35 +66,22 @@ static void vl_ma2sc_nand_hw_init(void)
 
 	/* Configure RDY/BSY */
 #ifdef CONFIG_SYS_NAND_READY_PIN
-	at91_set_pio_input(CONFIG_SYS_NAND_READY_PIN, 1);
+	gpio_direction_input(CONFIG_SYS_NAND_READY_PIN);
 #endif
 	/* Enable NandFlash */
-	at91_set_pio_output(CONFIG_SYS_NAND_ENABLE_PIN, 1);
+	gpio_direction_output(CONFIG_SYS_NAND_ENABLE_PIN, 1);
 }
 #endif
 
 #ifdef CONFIG_MACB
 static void vl_ma2sc_macb_hw_init(void)
 {
-	unsigned long	erstl;
 	at91_pmc_t	*pmc	= (at91_pmc_t *) ATMEL_BASE_PMC;
-	at91_rstc_t	*rstc	= (at91_rstc_t *) ATMEL_BASE_RSTC;
+
 	/* Enable clock */
 	writel(1 << ATMEL_ID_EMAC, &pmc->pcer);
 
-	erstl = readl(&rstc->mr) & AT91_RSTC_MR_ERSTL_MASK;
-
-	/* Need to reset PHY -> 500ms reset */
-	writel(AT91_RSTC_KEY | AT91_RSTC_MR_ERSTL(0x0D) |
-		AT91_RSTC_MR_URSTEN, &rstc->mr);
-
-	writel(AT91_RSTC_KEY | AT91_RSTC_CR_EXTRST, &rstc->cr);
-	/* Wait for end hardware reset */
-	while (!(readl(&rstc->sr) & AT91_RSTC_SR_NRSTL))
-		;
-
-	/* Restore NRST value */
-	writel(AT91_RSTC_KEY | erstl | AT91_RSTC_MR_URSTEN, &rstc->mr);
+	at91_phy_reset();
 
 	at91_macb_hw_init();
 }
diff --git a/board/actux1/u-boot.lds b/board/actux1/u-boot.lds
index b0f09f592e..4716e4f0e0 100644
--- a/board/actux1/u-boot.lds
+++ b/board/actux1/u-boot.lds
@@ -87,10 +87,13 @@ SECTIONS
 		KEEP(*(.__bss_end));
 	}
 
-	/DISCARD/ : { *(.dynsym) }
-	/DISCARD/ : { *(.dynstr*) }
-	/DISCARD/ : { *(.dynamic*) }
-	/DISCARD/ : { *(.plt*) }
-	/DISCARD/ : { *(.interp*) }
-	/DISCARD/ : { *(.gnu*) }
+	.dynsym _end : { *(.dynsym) }
+	.dynbss : { *(.dynbss) }
+	.dynstr : { *(.dynstr*) }
+	.dynamic : { *(.dynamic*) }
+	.hash : { *(.hash*) }
+	.plt : { *(.plt*) }
+	.interp : { *(.interp*) }
+	.gnu : { *(.gnu*) }
+	.ARM.exidx : { *(.ARM.exidx*) }
 }
diff --git a/board/actux2/u-boot.lds b/board/actux2/u-boot.lds
index d84934e1f8..f00d7c72b1 100644
--- a/board/actux2/u-boot.lds
+++ b/board/actux2/u-boot.lds
@@ -87,10 +87,13 @@ SECTIONS
 		KEEP(*(.__bss_end));
 	}
 
-	/DISCARD/ : { *(.dynsym) }
-	/DISCARD/ : { *(.dynstr*) }
-	/DISCARD/ : { *(.dynamic*) }
-	/DISCARD/ : { *(.plt*) }
-	/DISCARD/ : { *(.interp*) }
-	/DISCARD/ : { *(.gnu*) }
+	.dynsym _end : { *(.dynsym) }
+	.dynbss : { *(.dynbss) }
+	.dynstr : { *(.dynstr*) }
+	.dynamic : { *(.dynamic*) }
+	.hash : { *(.hash*) }
+	.plt : { *(.plt*) }
+	.interp : { *(.interp*) }
+	.gnu : { *(.gnu*) }
+	.ARM.exidx : { *(.ARM.exidx*) }
 }
diff --git a/board/actux3/u-boot.lds b/board/actux3/u-boot.lds
index 30c204b646..2de3ca60b5 100644
--- a/board/actux3/u-boot.lds
+++ b/board/actux3/u-boot.lds
@@ -87,10 +87,13 @@ SECTIONS
 		KEEP(*(.__bss_end));
 	}
 
-	/DISCARD/ : { *(.dynsym) }
-	/DISCARD/ : { *(.dynstr*) }
-	/DISCARD/ : { *(.dynamic*) }
-	/DISCARD/ : { *(.plt*) }
-	/DISCARD/ : { *(.interp*) }
-	/DISCARD/ : { *(.gnu*) }
+	.dynsym _end : { *(.dynsym) }
+	.dynbss : { *(.dynbss) }
+	.dynstr : { *(.dynstr*) }
+	.dynamic : { *(.dynamic*) }
+	.hash : { *(.hash*) }
+	.plt : { *(.plt*) }
+	.interp : { *(.interp*) }
+	.gnu : { *(.gnu*) }
+	.ARM.exidx : { *(.ARM.exidx*) }
 }
diff --git a/board/afeb9260/afeb9260.c b/board/afeb9260/afeb9260.c
index e1b1c10d52..ea9575d413 100644
--- a/board/afeb9260/afeb9260.c
+++ b/board/afeb9260/afeb9260.c
@@ -13,7 +13,6 @@
 #include <asm/arch/at91sam9_smc.h>
 #include <asm/arch/at91_common.h>
 #include <asm/arch/at91_pmc.h>
-#include <asm/arch/at91_rstc.h>
 #include <asm/arch/gpio.h>
 #include <asm/io.h>
 #include <asm/arch/hardware.h>
@@ -67,8 +66,6 @@ static void afeb9260_macb_hw_init(void)
 {
 	struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC;
 	struct at91_port *pioa = (struct at91_port *)ATMEL_BASE_PIOA;
-	struct at91_rstc *rstc = (struct at91_rstc *)ATMEL_BASE_RSTC;
-	unsigned long erstl;
 
 
 	/* Enable EMAC clock */
@@ -94,20 +91,7 @@ static void afeb9260_macb_hw_init(void)
 	       pin_to_mask(AT91_PIN_PA28),
 	       &pioa->pudr);
 
-	erstl = readl(&rstc->mr) & AT91_RSTC_MR_ERSTL_MASK;
-
-	/* Need to reset PHY -> 500ms reset */
-	writel(AT91_RSTC_KEY | AT91_RSTC_MR_ERSTL(13) |
-		AT91_RSTC_MR_URSTEN, &rstc->mr);
-	writel(AT91_RSTC_KEY | AT91_RSTC_CR_EXTRST, &rstc->cr);
-
-	/* Wait for end hardware reset */
-	while (!(readl(&rstc->sr) & AT91_RSTC_SR_NRSTL))
-		;
-	/* Restore NRST value */
-	writel(AT91_RSTC_KEY | erstl | AT91_RSTC_MR_URSTEN,
-		&rstc->mr);
-
+	at91_phy_reset();
 
 	/* Re-enable pull-up */
 	writel(pin_to_mask(AT91_PIN_PA14) |
diff --git a/board/atmel/at91sam9260ek/at91sam9260ek.c b/board/atmel/at91sam9260ek/at91sam9260ek.c
index 263de49c76..7f14af1011 100644
--- a/board/atmel/at91sam9260ek/at91sam9260ek.c
+++ b/board/atmel/at91sam9260ek/at91sam9260ek.c
@@ -12,7 +12,6 @@
 #include <asm/arch/at91sam9_smc.h>
 #include <asm/arch/at91_common.h>
 #include <asm/arch/at91_pmc.h>
-#include <asm/arch/at91_rstc.h>
 #include <asm/arch/gpio.h>
 #include <atmel_mci.h>
 
@@ -73,8 +72,6 @@ static void at91sam9260ek_macb_hw_init(void)
 {
 	struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC;
 	struct at91_port *pioa = (struct at91_port *)ATMEL_BASE_PIOA;
-	struct at91_rstc *rstc = (struct at91_rstc *)ATMEL_BASE_RSTC;
-	unsigned long erstl;
 
 	/* Enable EMAC clock */
 	writel(1 << ATMEL_ID_EMAC0, &pmc->pcer);
@@ -98,21 +95,7 @@ static void at91sam9260ek_macb_hw_init(void)
 		pin_to_mask(AT91_PIN_PA28),
 		&pioa->pudr);
 
-	erstl = readl(&rstc->mr) & AT91_RSTC_MR_ERSTL_MASK;
-
-	/* Need to reset PHY -> 500ms reset */
-	writel(AT91_RSTC_KEY | AT91_RSTC_MR_ERSTL(13) |
-		AT91_RSTC_MR_URSTEN, &rstc->mr);
-
-	writel(AT91_RSTC_KEY | AT91_RSTC_CR_EXTRST, &rstc->cr);
-
-	/* Wait for end hardware reset */
-	while (!(readl(&rstc->sr) & AT91_RSTC_SR_NRSTL))
-		;
-
-	/* Restore NRST value */
-	writel(AT91_RSTC_KEY | erstl | AT91_RSTC_MR_URSTEN,
-		&rstc->mr);
+	at91_phy_reset();
 
 	/* Re-enable pull-up */
 	writel(pin_to_mask(AT91_PIN_PA14) |
diff --git a/board/atmel/at91sam9263ek/at91sam9263ek.c b/board/atmel/at91sam9263ek/at91sam9263ek.c
index 2e9246f31c..d42a1730cc 100644
--- a/board/atmel/at91sam9263ek/at91sam9263ek.c
+++ b/board/atmel/at91sam9263ek/at91sam9263ek.c
@@ -12,7 +12,6 @@
 #include <asm/arch/at91sam9_smc.h>
 #include <asm/arch/at91_common.h>
 #include <asm/arch/at91_pmc.h>
-#include <asm/arch/at91_rstc.h>
 #include <asm/arch/at91_matrix.h>
 #include <asm/arch/at91_pio.h>
 #include <asm/arch/clk.h>
@@ -82,10 +81,9 @@ static void at91sam9263ek_nand_hw_init(void)
 #ifdef CONFIG_MACB
 static void at91sam9263ek_macb_hw_init(void)
 {
-	unsigned long 	erstl;
 	at91_pmc_t	*pmc	= (at91_pmc_t *) ATMEL_BASE_PMC;
 	at91_pio_t	*pio	= (at91_pio_t *) ATMEL_BASE_PIO;
-	at91_rstc_t	*rstc	= (at91_rstc_t *) ATMEL_BASE_RSTC;
+
 	/* Enable clock */
 	writel(1 << ATMEL_ID_EMAC, &pmc->pcer);
 
@@ -97,23 +95,10 @@ static void at91sam9263ek_macb_hw_init(void)
 	 *
 	 * PHY has internal pull-down
 	 */
-
 	writel(1 << 25, &pio->pioc.pudr);
 	writel((1 << 25) | (1 <<26), &pio->pioe.pudr);
 
-	erstl = readl(&rstc->mr) & AT91_RSTC_MR_ERSTL_MASK;
-
-	/* Need to reset PHY -> 500ms reset */
-	writel(AT91_RSTC_KEY | AT91_RSTC_MR_ERSTL(0x0D) |
-		AT91_RSTC_MR_URSTEN, &rstc->mr);
-
-	writel(AT91_RSTC_KEY | AT91_RSTC_CR_EXTRST, &rstc->cr);
-	/* Wait for end hardware reset */
-	while (!(readl(&rstc->sr) & AT91_RSTC_SR_NRSTL))
-		;
-
-	/* Restore NRST value */
-	writel(AT91_RSTC_KEY | erstl | AT91_RSTC_MR_URSTEN, &rstc->mr);
+	at91_phy_reset();
 
 	/* Re-enable pull-up */
 	writel(1 << 25, &pio->pioc.puer);
diff --git a/board/atmel/at91sam9m10g45ek/at91sam9m10g45ek.c b/board/atmel/at91sam9m10g45ek/at91sam9m10g45ek.c
index 6a071f6b7d..b7e2efd2fc 100644
--- a/board/atmel/at91sam9m10g45ek/at91sam9m10g45ek.c
+++ b/board/atmel/at91sam9m10g45ek/at91sam9m10g45ek.c
@@ -12,7 +12,6 @@
 #include <asm/arch/at91sam9_smc.h>
 #include <asm/arch/at91_common.h>
 #include <asm/arch/at91_pmc.h>
-#include <asm/arch/at91_rstc.h>
 #include <asm/arch/gpio.h>
 #include <asm/arch/clk.h>
 #include <lcd.h>
@@ -88,8 +87,6 @@ static void at91sam9m10g45ek_macb_hw_init(void)
 {
 	struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC;
 	struct at91_port *pioa = (struct at91_port *)ATMEL_BASE_PIOA;
-	struct at91_rstc *rstc = (struct at91_rstc *)ATMEL_BASE_RSTC;
-	unsigned long erstl;
 
 	/* Enable clock */
 	writel(1 << ATMEL_ID_EMAC, &pmc->pcer);
@@ -107,21 +104,7 @@ static void at91sam9m10g45ek_macb_hw_init(void)
 	       pin_to_mask(AT91_PIN_PA13),
 	       &pioa->pudr);
 
-	erstl = readl(&rstc->mr) & AT91_RSTC_MR_ERSTL_MASK;
-
-	/* Need to reset PHY -> 500ms reset */
-	writel(AT91_RSTC_KEY | AT91_RSTC_MR_ERSTL(13) |
-		AT91_RSTC_MR_URSTEN, &rstc->mr);
-
-	writel(AT91_RSTC_KEY | AT91_RSTC_CR_EXTRST, &rstc->cr);
-
-	/* Wait for end hardware reset */
-	while (!(readl(&rstc->sr) & AT91_RSTC_SR_NRSTL))
-		;
-
-	/* Restore NRST value */
-	writel(AT91_RSTC_KEY | erstl | AT91_RSTC_MR_URSTEN,
-		&rstc->mr);
+	at91_phy_reset();
 
 	/* Re-enable pull-up */
 	writel(pin_to_mask(AT91_PIN_PA15) |
diff --git a/board/atmel/sama5d3xek/sama5d3xek.c b/board/atmel/sama5d3xek/sama5d3xek.c
index 83fd63f541..eff94a48b2 100644
--- a/board/atmel/sama5d3xek/sama5d3xek.c
+++ b/board/atmel/sama5d3xek/sama5d3xek.c
@@ -20,6 +20,9 @@
 #include <micrel.h>
 #include <net.h>
 #include <netdev.h>
+#include <spl.h>
+#include <asm/arch/atmel_mpddrc.h>
+#include <asm/arch/at91_wdt.h>
 
 #ifdef CONFIG_USB_GADGET_ATMEL_USBA
 #include <asm/arch/atmel_usba_udc.h>
@@ -159,6 +162,12 @@ void lcd_show_board_info(void)
 
 int board_early_init_f(void)
 {
+	at91_periph_clk_enable(ATMEL_ID_PIOA);
+	at91_periph_clk_enable(ATMEL_ID_PIOB);
+	at91_periph_clk_enable(ATMEL_ID_PIOC);
+	at91_periph_clk_enable(ATMEL_ID_PIOD);
+	at91_periph_clk_enable(ATMEL_ID_PIOE);
+
 	at91_seriald_hw_init();
 
 	return 0;
@@ -291,3 +300,85 @@ void spi_cs_deactivate(struct spi_slave *slave)
 	}
 }
 #endif /* CONFIG_ATMEL_SPI */
+
+/* SPL */
+#ifdef CONFIG_SPL_BUILD
+void spl_board_init(void)
+{
+#ifdef CONFIG_SYS_USE_MMC
+	sama5d3xek_mci_hw_init();
+#endif
+}
+
+static void ddr2_conf(struct atmel_mpddr *ddr2)
+{
+	ddr2->md = (ATMEL_MPDDRC_MD_DBW_32_BITS | ATMEL_MPDDRC_MD_DDR2_SDRAM);
+
+	ddr2->cr = (ATMEL_MPDDRC_CR_NC_COL_10 |
+		    ATMEL_MPDDRC_CR_NR_ROW_14 |
+		    ATMEL_MPDDRC_CR_CAS_DDR_CAS3 |
+		    ATMEL_MPDDRC_CR_ENRDM_ON |
+		    ATMEL_MPDDRC_CR_NB_8BANKS |
+		    ATMEL_MPDDRC_CR_NDQS_DISABLED |
+		    ATMEL_MPDDRC_CR_DECOD_INTERLEAVED |
+		    ATMEL_MPDDRC_CR_UNAL_SUPPORTED);
+	/*
+	 * As the DDR2-SDRAm device requires a refresh time is 7.8125us
+	 * when DDR run at 133MHz, so it needs (7.8125us * 133MHz / 10^9) clocks
+	 */
+	ddr2->rtr = 0x411;
+
+	ddr2->tpr0 = (6 << ATMEL_MPDDRC_TPR0_TRAS_OFFSET |
+		      2 << ATMEL_MPDDRC_TPR0_TRCD_OFFSET |
+		      2 << ATMEL_MPDDRC_TPR0_TWR_OFFSET |
+		      8 << ATMEL_MPDDRC_TPR0_TRC_OFFSET |
+		      2 << ATMEL_MPDDRC_TPR0_TRP_OFFSET |
+		      2 << ATMEL_MPDDRC_TPR0_TRRD_OFFSET |
+		      2 << ATMEL_MPDDRC_TPR0_TWTR_OFFSET |
+		      2 << ATMEL_MPDDRC_TPR0_TMRD_OFFSET);
+
+	ddr2->tpr1 = (2 << ATMEL_MPDDRC_TPR1_TXP_OFFSET |
+		      200 << ATMEL_MPDDRC_TPR1_TXSRD_OFFSET |
+		      28 << ATMEL_MPDDRC_TPR1_TXSNR_OFFSET |
+		      26 << ATMEL_MPDDRC_TPR1_TRFC_OFFSET);
+
+	ddr2->tpr2 = (7 << ATMEL_MPDDRC_TPR2_TFAW_OFFSET |
+		      2 << ATMEL_MPDDRC_TPR2_TRTP_OFFSET |
+		      2 << ATMEL_MPDDRC_TPR2_TRPA_OFFSET |
+		      7 << ATMEL_MPDDRC_TPR2_TXARDS_OFFSET |
+		      8 << ATMEL_MPDDRC_TPR2_TXARD_OFFSET);
+}
+
+void mem_init(void)
+{
+	struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC;
+	struct atmel_mpddr ddr2;
+
+	ddr2_conf(&ddr2);
+
+	/* enable MPDDR clock */
+	at91_periph_clk_enable(ATMEL_ID_MPDDRC);
+	writel(0x4, &pmc->scer);
+
+	/* DDRAM2 Controller initialize */
+	ddr2_init(ATMEL_BASE_DDRCS, &ddr2);
+}
+
+void at91_pmc_init(void)
+{
+	struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC;
+	u32 tmp;
+
+	tmp = AT91_PMC_PLLAR_29 |
+	      AT91_PMC_PLLXR_PLLCOUNT(0x3f) |
+	      AT91_PMC_PLLXR_MUL(43) |
+	      AT91_PMC_PLLXR_DIV(1);
+	at91_plla_init(tmp);
+
+	writel(0x3 << 8, &pmc->pllicpr);
+
+	tmp = AT91_PMC_MCKR_MDIV_4 |
+	      AT91_PMC_MCKR_CSS_PLLA;
+	at91_mck_init(tmp);
+}
+#endif
diff --git a/board/bluewater/snapper9260/snapper9260.c b/board/bluewater/snapper9260/snapper9260.c
index 8a6919dbb1..bfde1291a5 100644
--- a/board/bluewater/snapper9260/snapper9260.c
+++ b/board/bluewater/snapper9260/snapper9260.c
@@ -14,7 +14,6 @@
 #include <asm/arch/at91sam9_smc.h>
 #include <asm/arch/at91_common.h>
 #include <asm/arch/at91_pmc.h>
-#include <asm/arch/at91_rstc.h>
 #include <asm/arch/gpio.h>
 #include <net.h>
 #include <netdev.h>
@@ -31,8 +30,6 @@ static void macb_hw_init(void)
 {
 	struct at91_pmc *pmc   = (struct at91_pmc  *)ATMEL_BASE_PMC;
 	struct at91_port *pioa = (struct at91_port *)ATMEL_BASE_PIOA;
-	struct at91_rstc *rstc = (struct at91_rstc *)ATMEL_BASE_RSTC;
-	unsigned long erstl;
 
 	/* Enable clock */
 	writel(1 << ATMEL_ID_EMAC0, &pmc->pcer);
@@ -54,18 +51,7 @@ static void macb_hw_init(void)
 	/* Enable ethernet power */
 	pca953x_set_val(0x28, IO_EXP_ETH_POWER, 0);
 
-	/* Need to reset PHY -> 500ms reset */
-	erstl = readl(&rstc->mr) & AT91_RSTC_MR_ERSTL_MASK;
-	writel(AT91_RSTC_KEY | AT91_RSTC_MR_ERSTL(13) |
-	       AT91_RSTC_MR_URSTEN, &rstc->mr);
-	writel(AT91_RSTC_KEY | AT91_RSTC_CR_EXTRST, &rstc->cr);
-
-	/* Wait for end hardware reset */
-	while (!(readl(&rstc->sr) & AT91_RSTC_SR_NRSTL))
-		;
-
-	/* Restore NRST value */
-	writel(AT91_RSTC_KEY | erstl | AT91_RSTC_MR_URSTEN, &rstc->mr);
+	at91_phy_reset();
 
 	/* Bring the ethernet out of reset */
 	pca953x_set_val(0x28, IO_EXP_ETH_RESET, 1);
diff --git a/board/calao/sbc35_a9g20/sbc35_a9g20.c b/board/calao/sbc35_a9g20/sbc35_a9g20.c
index ecf261c1ae..2074a93a12 100644
--- a/board/calao/sbc35_a9g20/sbc35_a9g20.c
+++ b/board/calao/sbc35_a9g20/sbc35_a9g20.c
@@ -15,7 +15,6 @@
 #include <asm/arch/at91sam9_smc.h>
 #include <asm/arch/at91_common.h>
 #include <asm/arch/at91_pmc.h>
-#include <asm/arch/at91_rstc.h>
 #include <asm/arch/gpio.h>
 
 #if defined(CONFIG_RESET_PHY_R) && defined(CONFIG_MACB)
@@ -77,8 +76,6 @@ static void sbc35_a9g20_macb_hw_init(void)
 {
 	struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC;
 	struct at91_port *pioa = (struct at91_port *)ATMEL_BASE_PIOA;
-	struct at91_rstc *rstc = (struct at91_rstc *)ATMEL_BASE_RSTC;
-	unsigned long erstl;
 
 	/* Enable EMAC clock */
 	writel(1 << ATMEL_ID_EMAC0, &pmc->pcer);
@@ -102,21 +99,7 @@ static void sbc35_a9g20_macb_hw_init(void)
 	       pin_to_mask(AT91_PIN_PA28),
 	       &pioa->pudr);
 
-	erstl = readl(&rstc->mr) & AT91_RSTC_MR_ERSTL_MASK;
-
-	/* Need to reset PHY -> 500ms reset */
-	writel(AT91_RSTC_KEY | AT91_RSTC_MR_ERSTL(13) |
-		AT91_RSTC_MR_URSTEN, &rstc->mr);
-
-	writel(AT91_RSTC_KEY | AT91_RSTC_CR_EXTRST, &rstc->cr);
-
-	/* Wait for end hardware reset */
-	while (!(readl(&rstc->sr) & AT91_RSTC_SR_NRSTL))
-		;
-
-	/* Restore NRST value */
-	writel(AT91_RSTC_KEY | erstl | AT91_RSTC_MR_URSTEN,
-		&rstc->mr);
+	at91_phy_reset();
 
 	/* Re-enable pull-up */
 	writel(pin_to_mask(AT91_PIN_PA14) |
diff --git a/board/calao/usb_a9263/Makefile b/board/calao/usb_a9263/Makefile
new file mode 100644
index 0000000000..8a22b3eac7
--- /dev/null
+++ b/board/calao/usb_a9263/Makefile
@@ -0,0 +1,14 @@
+#
+# (C) Copyright 2003-2008
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# (C) Copyright 2008
+# Stelian Pop <stelian@popies.net>
+# Lead Tech Design <www.leadtechdesign.com>
+#
+# (C) Copyright 2013
+# Mateusz Kulikowski <mateusz.kulikowski@gmail.com>
+#
+# SPDX-License-Identifier:	GPL-2.0+
+
+obj-y	+= usb_a9263.o
diff --git a/board/calao/usb_a9263/usb_a9263.c b/board/calao/usb_a9263/usb_a9263.c
new file mode 100644
index 0000000000..266e9507ef
--- /dev/null
+++ b/board/calao/usb_a9263/usb_a9263.c
@@ -0,0 +1,148 @@
+/*
+ * (C) Copyright 2007-2013
+ * Stelian Pop <stelian.pop@leadtechdesign.com>
+ * Lead Tech Design <www.leadtechdesign.com>
+ * Thomas Petazzoni, Free Electrons, <thomas.petazzoni@free-electrons.com>
+ * Mateusz Kulikowski <mateusz.kulikowski@gmail.com>
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#include <common.h>
+#include <asm/arch/at91sam9_smc.h>
+#include <asm/arch/at91_common.h>
+#include <asm/arch/at91_matrix.h>
+#include <asm/arch/at91_pmc.h>
+#include <asm/arch/gpio.h>
+#include <asm-generic/gpio.h>
+#include <asm/io.h>
+#include <net.h>
+#include <netdev.h>
+#include <dataflash.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+#ifdef CONFIG_HAS_DATAFLASH
+AT91S_DATAFLASH_INFO dataflash_info[CONFIG_SYS_MAX_DATAFLASH_BANKS];
+
+struct dataflash_addr cs[CONFIG_SYS_MAX_DATAFLASH_BANKS] = {
+	{CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0, 0},	/* Logical adress, CS */
+};
+
+/*define the area offsets*/
+dataflash_protect_t area_list[NB_DATAFLASH_AREA] = {
+	{0x00000000, 0x00001FFF, FLAG_PROTECT_SET, 0, "Bootstrap"},
+	{0x00002000, 0x00003FFF, FLAG_PROTECT_CLEAR, 0, "Environment"},
+	{0x00004000, 0xFFFFFFFF, FLAG_PROTECT_CLEAR, 0, "U-Boot"},
+};
+#endif
+
+#ifdef CONFIG_CMD_NAND
+static void usb_a9263_nand_hw_init(void)
+{
+	unsigned long csa;
+	at91_smc_t *smc = (at91_smc_t *)ATMEL_BASE_SMC0;
+	at91_matrix_t *matrix = (at91_matrix_t *)ATMEL_BASE_MATRIX;
+	at91_pmc_t *pmc = (at91_pmc_t *)ATMEL_BASE_PMC;
+
+	/* Enable CS3 */
+	csa = readl(&matrix->csa[0]) | AT91_MATRIX_CSA_EBI_CS3A;
+	writel(csa, &matrix->csa[0]);
+
+	/* Configure SMC CS3 for NAND/SmartMedia */
+	writel(AT91_SMC_SETUP_NWE(1) | AT91_SMC_SETUP_NCS_WR(0) |
+	       AT91_SMC_SETUP_NRD(1) | AT91_SMC_SETUP_NCS_RD(0),
+	       &smc->cs[3].setup);
+
+	writel(AT91_SMC_PULSE_NWE(3) | AT91_SMC_PULSE_NCS_WR(3) |
+	       AT91_SMC_PULSE_NRD(3) | AT91_SMC_PULSE_NCS_RD(3),
+	       &smc->cs[3].pulse);
+
+	writel(AT91_SMC_CYCLE_NWE(5) | AT91_SMC_CYCLE_NRD(5),
+	       &smc->cs[3].cycle);
+
+	writel(AT91_SMC_MODE_RM_NRD | AT91_SMC_MODE_WM_NWE |
+	       AT91_SMC_MODE_EXNW_DISABLE |
+	       AT91_SMC_MODE_DBW_8 |
+	       AT91_SMC_MODE_TDF_CYCLE(2), &smc->cs[3].mode);
+
+	writel(1 << ATMEL_ID_PIOA | 1 << ATMEL_ID_PIOCDE, &pmc->pcer);
+
+	/* Configure RDY/BSY */
+	gpio_request(CONFIG_SYS_NAND_READY_PIN, "NAND ready/busy");
+	gpio_direction_input(CONFIG_SYS_NAND_READY_PIN);
+
+	/* Enable NandFlash */
+	gpio_request(CONFIG_SYS_NAND_ENABLE_PIN, "NAND enable");
+	gpio_direction_output(CONFIG_SYS_NAND_ENABLE_PIN, 1);
+}
+#endif
+
+#ifdef CONFIG_MACB
+static void usb_a9263_macb_hw_init(void)
+{
+	at91_pmc_t *pmc = (at91_pmc_t *)ATMEL_BASE_PMC;
+
+	/* Enable clock */
+	writel(1 << ATMEL_ID_EMAC, &pmc->pcer);
+
+	/*
+	 * Disable pull-up on:
+	 *  RXDV (PC25) => PHY normal mode (not Test mode)
+	 *  ERX0 (PE25) => PHY ADDR0
+	 *  ERX1 (PE26) => PHY ADDR1 => PHYADDR = 0x0
+	 *
+	 * PHY has internal weak pull-up/pull-down
+	 */
+	gpio_request(GPIO_PIN_PC(25), "PHY mode");
+	gpio_direction_input(GPIO_PIN_PC(25));
+
+	gpio_request(GPIO_PIN_PE(25), "PHY ADDR0");
+	gpio_direction_input(GPIO_PIN_PE(25));
+
+	gpio_request(GPIO_PIN_PE(26), "PHY ADDR1");
+	gpio_direction_input(GPIO_PIN_PE(26));
+
+	at91_phy_reset();
+
+	/* It will set proper pinmux for ports PC25, PE25-26 */
+	at91_macb_hw_init();
+}
+#endif
+
+int board_init(void)
+{
+	/* adress of boot parameters */
+	gd->bd->bi_boot_params = CONFIG_SYS_SDRAM_BASE + 0x100;
+
+#ifdef CONFIG_CMD_NAND
+	usb_a9263_nand_hw_init();
+#endif
+#ifdef CONFIG_HAS_DATAFLASH
+	at91_spi0_hw_init(1 << 0);
+#endif
+#ifdef CONFIG_MACB
+	usb_a9263_macb_hw_init();
+#endif
+#ifdef CONFIG_USB_OHCI_NEW
+	at91_uhp_hw_init();
+#endif
+	return 0;
+}
+
+int dram_init(void)
+{
+	gd->ram_size = get_ram_size((void *)CONFIG_SYS_SDRAM_BASE,
+				    CONFIG_SYS_SDRAM_SIZE);
+	return 0;
+}
+
+int board_eth_init(bd_t *bis)
+{
+	int rc = 0;
+
+#ifdef CONFIG_MACB
+	rc = macb_eth_initialize(0, (void *)ATMEL_BASE_EMAC, 0x0001);
+#endif
+	return rc;
+}
diff --git a/board/compulab/cm_t335/Makefile b/board/compulab/cm_t335/Makefile
new file mode 100644
index 0000000000..0e6e96e039
--- /dev/null
+++ b/board/compulab/cm_t335/Makefile
@@ -0,0 +1,10 @@
+#
+# Copyright (C) 2013 Compulab Ltd - http://compulab.co.il/
+#
+# Author: Ilya Ledvich <ilya@compulab.co.il>
+#
+# SPDX-License-Identifier:	GPL-2.0+
+#
+
+obj-y	+= $(BOARD).o
+obj-$(CONFIG_SPL_BUILD) += mux.o spl.o
diff --git a/board/compulab/cm_t335/cm_t335.c b/board/compulab/cm_t335/cm_t335.c
new file mode 100644
index 0000000000..01019e8eb2
--- /dev/null
+++ b/board/compulab/cm_t335/cm_t335.c
@@ -0,0 +1,162 @@
+/*
+ * Board functions for Compulab CM-T335 board
+ *
+ * Copyright (C) 2013, Compulab Ltd - http://compulab.co.il/
+ *
+ * Author: Ilya Ledvich <ilya@compulab.co.il>
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#include <common.h>
+#include <errno.h>
+#include <miiphy.h>
+#include <cpsw.h>
+
+#include <asm/arch/sys_proto.h>
+#include <asm/arch/hardware_am33xx.h>
+#include <asm/io.h>
+#include <asm/gpio.h>
+
+#include "../common/eeprom.h"
+
+DECLARE_GLOBAL_DATA_PTR;
+
+/*
+ * Basic board specific setup.  Pinmux has been handled already.
+ */
+int board_init(void)
+{
+	gd->bd->bi_boot_params = CONFIG_SYS_SDRAM_BASE + 0x100;
+
+	gpmc_init();
+
+#if defined(CONFIG_STATUS_LED) && defined(STATUS_LED_BOOT)
+	status_led_set(STATUS_LED_BOOT, STATUS_LED_OFF);
+#endif
+	return 0;
+}
+
+#if defined (CONFIG_DRIVER_TI_CPSW) && !defined(CONFIG_SPL_BUILD)
+static void cpsw_control(int enabled)
+{
+	/* VTP can be added here */
+	return;
+}
+
+static struct cpsw_slave_data cpsw_slave = {
+	.slave_reg_ofs	= 0x208,
+	.sliver_reg_ofs	= 0xd80,
+	.phy_id		= 0,
+	.phy_if		= PHY_INTERFACE_MODE_RGMII,
+};
+
+static struct cpsw_platform_data cpsw_data = {
+	.mdio_base		= CPSW_MDIO_BASE,
+	.cpsw_base		= CPSW_BASE,
+	.mdio_div		= 0xff,
+	.channels		= 8,
+	.cpdma_reg_ofs		= 0x800,
+	.slaves			= 1,
+	.slave_data		= &cpsw_slave,
+	.ale_reg_ofs		= 0xd00,
+	.ale_entries		= 1024,
+	.host_port_reg_ofs	= 0x108,
+	.hw_stats_reg_ofs	= 0x900,
+	.bd_ram_ofs		= 0x2000,
+	.mac_control		= (1 << 5),
+	.control		= cpsw_control,
+	.host_port_num		= 0,
+	.version		= CPSW_CTRL_VERSION_2,
+};
+
+/* PHY reset GPIO */
+#define GPIO_PHY_RST		GPIO_PIN(3, 7)
+
+static void board_phy_init(void)
+{
+	gpio_request(GPIO_PHY_RST, "phy_rst");
+	gpio_direction_output(GPIO_PHY_RST, 0);
+	mdelay(2);
+	gpio_set_value(GPIO_PHY_RST, 1);
+	mdelay(2);
+}
+
+static void get_efuse_mac_addr(uchar *enetaddr)
+{
+	uint32_t mac_hi, mac_lo;
+	struct ctrl_dev *cdev = (struct ctrl_dev *)CTRL_DEVICE_BASE;
+
+	mac_lo = readl(&cdev->macid0l);
+	mac_hi = readl(&cdev->macid0h);
+	enetaddr[0] = mac_hi & 0xFF;
+	enetaddr[1] = (mac_hi & 0xFF00) >> 8;
+	enetaddr[2] = (mac_hi & 0xFF0000) >> 16;
+	enetaddr[3] = (mac_hi & 0xFF000000) >> 24;
+	enetaddr[4] = mac_lo & 0xFF;
+	enetaddr[5] = (mac_lo & 0xFF00) >> 8;
+}
+
+/*
+ * Routine: handle_mac_address
+ * Description: prepare MAC address for on-board Ethernet.
+ */
+static int handle_mac_address(void)
+{
+	uchar enetaddr[6];
+	int rv;
+
+	rv = eth_getenv_enetaddr("ethaddr", enetaddr);
+	if (rv)
+		return 0;
+
+	rv = cl_eeprom_read_mac_addr(enetaddr);
+	if (rv)
+		get_efuse_mac_addr(enetaddr);
+
+	if (!is_valid_ether_addr(enetaddr))
+		return -1;
+
+	return eth_setenv_enetaddr("ethaddr", enetaddr);
+}
+
+#define AR8051_PHY_DEBUG_ADDR_REG	0x1d
+#define AR8051_PHY_DEBUG_DATA_REG	0x1e
+#define AR8051_DEBUG_RGMII_CLK_DLY_REG	0x5
+#define AR8051_RGMII_TX_CLK_DLY		0x100
+
+int board_eth_init(bd_t *bis)
+{
+	int rv, n = 0;
+	const char *devname;
+	struct ctrl_dev *cdev = (struct ctrl_dev *)CTRL_DEVICE_BASE;
+
+	rv = handle_mac_address();
+	if (rv)
+		printf("No MAC address found!\n");
+
+	writel(RGMII_MODE_ENABLE | RGMII_INT_DELAY, &cdev->miisel);
+
+	board_phy_init();
+
+	rv = cpsw_register(&cpsw_data);
+	if (rv < 0)
+		printf("Error %d registering CPSW switch\n", rv);
+	else
+		n += rv;
+
+	/*
+	 * CPSW RGMII Internal Delay Mode is not supported in all PVT
+	 * operating points.  So we must set the TX clock delay feature
+	 * in the AR8051 PHY.  Since we only support a single ethernet
+	 * device, we only do this for the first instance.
+	 */
+	devname = miiphy_get_current_dev();
+
+	miiphy_write(devname, 0x0, AR8051_PHY_DEBUG_ADDR_REG,
+		     AR8051_DEBUG_RGMII_CLK_DLY_REG);
+	miiphy_write(devname, 0x0, AR8051_PHY_DEBUG_DATA_REG,
+		     AR8051_RGMII_TX_CLK_DLY);
+	return n;
+}
+#endif /* CONFIG_DRIVER_TI_CPSW && !CONFIG_SPL_BUILD */
diff --git a/board/compulab/cm_t335/mux.c b/board/compulab/cm_t335/mux.c
new file mode 100644
index 0000000000..7d2beb01e5
--- /dev/null
+++ b/board/compulab/cm_t335/mux.c
@@ -0,0 +1,117 @@
+/*
+ * Pinmux configuration for Compulab CM-T335 board
+ *
+ * Copyright (C) 2013, Compulab Ltd - http://compulab.co.il/
+ *
+ * Author: Ilya Ledvich <ilya@compulab.co.il>
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#include <common.h>
+#include <asm/arch/sys_proto.h>
+#include <asm/arch/hardware.h>
+#include <asm/arch/mux.h>
+#include <asm/io.h>
+
+static struct module_pin_mux uart0_pin_mux[] = {
+	{OFFSET(uart0_rxd), (MODE(0) | PULLUP_EN | RXACTIVE)},
+	{OFFSET(uart0_txd), (MODE(0) | PULLUDEN)},
+	{-1},
+};
+
+static struct module_pin_mux uart1_pin_mux[] = {
+	{OFFSET(uart1_rxd), (MODE(0) | PULLUP_EN | RXACTIVE)},
+	{OFFSET(uart1_txd), (MODE(0) | PULLUDEN)},
+	{OFFSET(uart1_ctsn), (MODE(0) | PULLUP_EN | RXACTIVE)},
+	{OFFSET(uart1_rtsn), (MODE(0) | PULLUDEN)},
+	{-1},
+};
+
+static struct module_pin_mux mmc0_pin_mux[] = {
+	{OFFSET(mmc0_dat3), (MODE(0) | RXACTIVE | PULLUP_EN)},
+	{OFFSET(mmc0_dat2), (MODE(0) | RXACTIVE | PULLUP_EN)},
+	{OFFSET(mmc0_dat1), (MODE(0) | RXACTIVE | PULLUP_EN)},
+	{OFFSET(mmc0_dat0), (MODE(0) | RXACTIVE | PULLUP_EN)},
+	{OFFSET(mmc0_clk), (MODE(0) | RXACTIVE | PULLUP_EN)},
+	{OFFSET(mmc0_cmd), (MODE(0) | RXACTIVE | PULLUP_EN)},
+	{-1},
+};
+
+static struct module_pin_mux i2c0_pin_mux[] = {
+	{OFFSET(i2c0_sda), (MODE(0) | RXACTIVE | PULLUDDIS | SLEWCTRL)},
+	{OFFSET(i2c0_scl), (MODE(0) | RXACTIVE | PULLUDDIS | SLEWCTRL)},
+	{-1},
+};
+
+static struct module_pin_mux i2c1_pin_mux[] = {
+	/* I2C_DATA */
+	{OFFSET(uart0_ctsn), (MODE(3) | RXACTIVE | PULLUDDIS | SLEWCTRL)},
+	/* I2C_SCLK */
+	{OFFSET(uart0_rtsn), (MODE(3) | RXACTIVE | PULLUDDIS | SLEWCTRL)},
+	{-1},
+};
+
+static struct module_pin_mux rgmii1_pin_mux[] = {
+	{OFFSET(mii1_txen), MODE(2)},			/* RGMII1_TCTL */
+	{OFFSET(mii1_rxdv), MODE(2) | RXACTIVE},	/* RGMII1_RCTL */
+	{OFFSET(mii1_txd3), MODE(2)},			/* RGMII1_TD3 */
+	{OFFSET(mii1_txd2), MODE(2)},			/* RGMII1_TD2 */
+	{OFFSET(mii1_txd1), MODE(2)},			/* RGMII1_TD1 */
+	{OFFSET(mii1_txd0), MODE(2)},			/* RGMII1_TD0 */
+	{OFFSET(mii1_txclk), MODE(2)},			/* RGMII1_TCLK */
+	{OFFSET(mii1_rxclk), MODE(2) | RXACTIVE},	/* RGMII1_RCLK */
+	{OFFSET(mii1_rxd3), MODE(2) | RXACTIVE},	/* RGMII1_RD3 */
+	{OFFSET(mii1_rxd2), MODE(2) | RXACTIVE},	/* RGMII1_RD2 */
+	{OFFSET(mii1_rxd1), MODE(2) | RXACTIVE},	/* RGMII1_RD1 */
+	{OFFSET(mii1_rxd0), MODE(2) | RXACTIVE},	/* RGMII1_RD0 */
+	{OFFSET(mdio_data), MODE(0) | RXACTIVE | PULLUP_EN},/* MDIO_DATA */
+	{OFFSET(mdio_clk), MODE(0) | PULLUP_EN},	/* MDIO_CLK */
+	{-1},
+};
+
+static struct module_pin_mux nand_pin_mux[] = {
+	{OFFSET(gpmc_ad0), (MODE(0) | PULLUP_EN | RXACTIVE)},	/* NAND AD0 */
+	{OFFSET(gpmc_ad1), (MODE(0) | PULLUP_EN | RXACTIVE)},	/* NAND AD1 */
+	{OFFSET(gpmc_ad2), (MODE(0) | PULLUP_EN | RXACTIVE)},	/* NAND AD2 */
+	{OFFSET(gpmc_ad3), (MODE(0) | PULLUP_EN | RXACTIVE)},	/* NAND AD3 */
+	{OFFSET(gpmc_ad4), (MODE(0) | PULLUP_EN | RXACTIVE)},	/* NAND AD4 */
+	{OFFSET(gpmc_ad5), (MODE(0) | PULLUP_EN | RXACTIVE)},	/* NAND AD5 */
+	{OFFSET(gpmc_ad6), (MODE(0) | PULLUP_EN | RXACTIVE)},	/* NAND AD6 */
+	{OFFSET(gpmc_ad7), (MODE(0) | PULLUP_EN | RXACTIVE)},	/* NAND AD7 */
+	{OFFSET(gpmc_wait0), (MODE(0) | RXACTIVE | PULLUP_EN)}, /* NAND WAIT */
+	{OFFSET(gpmc_wpn), (MODE(7) | PULLUP_EN | RXACTIVE)},	/* NAND_WPN */
+	{OFFSET(gpmc_csn0), (MODE(0) | PULLUDEN)},		/* NAND_CS0 */
+	{OFFSET(gpmc_advn_ale), (MODE(0) | PULLUDEN)},	/* NAND_ADV_ALE */
+	{OFFSET(gpmc_oen_ren), (MODE(0) | PULLUDEN)},	/* NAND_OE */
+	{OFFSET(gpmc_wen), (MODE(0) | PULLUDEN)},	/* NAND_WEN */
+	{OFFSET(gpmc_be0n_cle), (MODE(0) | PULLUDEN)},	/* NAND_BE_CLE */
+	{-1},
+};
+
+static struct module_pin_mux eth_phy_rst_pin_mux[] = {
+	{OFFSET(emu0), (MODE(7) | PULLUDDIS)},	/* GPIO3_7 */
+	{-1},
+};
+
+static struct module_pin_mux status_led_pin_mux[] = {
+	{OFFSET(gpmc_csn3), (MODE(7) | PULLUDEN)},	/* GPIO2_0 */
+	{-1},
+};
+
+void set_uart_mux_conf(void)
+{
+	configure_module_pin_mux(uart0_pin_mux);
+	configure_module_pin_mux(uart1_pin_mux);
+}
+
+void set_mux_conf_regs(void)
+{
+	configure_module_pin_mux(i2c0_pin_mux);
+	configure_module_pin_mux(i2c1_pin_mux);
+	configure_module_pin_mux(rgmii1_pin_mux);
+	configure_module_pin_mux(eth_phy_rst_pin_mux);
+	configure_module_pin_mux(mmc0_pin_mux);
+	configure_module_pin_mux(nand_pin_mux);
+	configure_module_pin_mux(status_led_pin_mux);
+}
diff --git a/board/compulab/cm_t335/spl.c b/board/compulab/cm_t335/spl.c
new file mode 100644
index 0000000000..99f3a869bb
--- /dev/null
+++ b/board/compulab/cm_t335/spl.c
@@ -0,0 +1,106 @@
+/*
+ * SPL specific code for Compulab CM-T335 board
+ *
+ * Board functions for Compulab CM-T335 board
+ *
+ * Copyright (C) 2013, Compulab Ltd - http://compulab.co.il/
+ *
+ * Author: Ilya Ledvich <ilya@compulab.co.il>
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#include <common.h>
+#include <errno.h>
+
+#include <asm/arch/ddr_defs.h>
+#include <asm/arch/clock.h>
+#include <asm/arch/clocks_am33xx.h>
+#include <asm/arch/sys_proto.h>
+#include <asm/arch/hardware_am33xx.h>
+#include <asm/sizes.h>
+
+static const struct ddr_data ddr3_data = {
+	.datardsratio0		= MT41J128MJT125_RD_DQS,
+	.datawdsratio0		= MT41J128MJT125_WR_DQS,
+	.datafwsratio0		= MT41J128MJT125_PHY_FIFO_WE,
+	.datawrsratio0		= MT41J128MJT125_PHY_WR_DATA,
+};
+
+static const struct cmd_control ddr3_cmd_ctrl_data = {
+	.cmd0csratio		= MT41J128MJT125_RATIO,
+	.cmd0iclkout		= MT41J128MJT125_INVERT_CLKOUT,
+
+	.cmd1csratio		= MT41J128MJT125_RATIO,
+	.cmd1iclkout		= MT41J128MJT125_INVERT_CLKOUT,
+
+	.cmd2csratio		= MT41J128MJT125_RATIO,
+	.cmd2iclkout		= MT41J128MJT125_INVERT_CLKOUT,
+};
+
+static struct emif_regs ddr3_emif_reg_data = {
+	.sdram_config		= MT41J128MJT125_EMIF_SDCFG,
+	.ref_ctrl		= MT41J128MJT125_EMIF_SDREF,
+	.sdram_tim1		= MT41J128MJT125_EMIF_TIM1,
+	.sdram_tim2		= MT41J128MJT125_EMIF_TIM2,
+	.sdram_tim3		= MT41J128MJT125_EMIF_TIM3,
+	.zq_config		= MT41J128MJT125_ZQ_CFG,
+	.emif_ddr_phy_ctlr_1	= MT41J128MJT125_EMIF_READ_LATENCY |
+					PHY_EN_DYN_PWRDN,
+};
+
+const struct dpll_params dpll_ddr = {
+/*       M           N            M2  M3  M4  M5  M6 */
+	303, (V_OSCK/1000000) - 1, 1, -1, -1, -1, -1};
+
+void am33xx_spl_board_init(void)
+{
+	struct ctrl_dev *cdev = (struct ctrl_dev *)CTRL_DEVICE_BASE;
+
+	/* Get the frequency */
+	dpll_mpu_opp100.m = am335x_get_efuse_mpu_max_freq(cdev);
+
+	/* Set CORE Frequencies to OPP100 */
+	do_setup_dpll(&dpll_core_regs, &dpll_core_opp100);
+
+	/* Set MPU Frequency to what we detected now that voltages are set */
+	do_setup_dpll(&dpll_mpu_regs, &dpll_mpu_opp100);
+}
+
+const struct dpll_params *get_dpll_ddr_params(void)
+{
+	return &dpll_ddr;
+}
+
+static void probe_sdram_size(long size)
+{
+	switch (size) {
+	case SZ_512M:
+		ddr3_emif_reg_data.sdram_config = MT41J256MJT125_EMIF_SDCFG;
+		break;
+	case SZ_256M:
+		ddr3_emif_reg_data.sdram_config = MT41J128MJT125_EMIF_SDCFG;
+		break;
+	case SZ_128M:
+		ddr3_emif_reg_data.sdram_config = MT41J64MJT125_EMIF_SDCFG;
+		break;
+	default:
+		puts("Failed configuring DRAM, resetting...\n\n");
+		reset_cpu(0);
+	}
+	debug("%s: setting DRAM size to %ldM\n", __func__, size >> 20);
+	config_ddr(303, MT41J128MJT125_IOCTRL_VALUE, &ddr3_data,
+		   &ddr3_cmd_ctrl_data, &ddr3_emif_reg_data, 0);
+}
+
+void sdram_init(void)
+{
+	long size = SZ_1G;
+
+	do {
+		size = size / 2;
+		probe_sdram_size(size);
+	} while (get_ram_size((void *)CONFIG_SYS_SDRAM_BASE, size) < size);
+
+	return;
+}
diff --git a/board/compulab/cm_t335/u-boot.lds b/board/compulab/cm_t335/u-boot.lds
new file mode 100644
index 0000000000..1b609a249a
--- /dev/null
+++ b/board/compulab/cm_t335/u-boot.lds
@@ -0,0 +1,101 @@
+/*
+ * Copyright (c) 2004-2008 Texas Instruments
+ *
+ * (C) Copyright 2002
+ * Gary Jennejohn, DENX Software Engineering, <garyj@denx.de>
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm")
+OUTPUT_ARCH(arm)
+ENTRY(_start)
+SECTIONS
+{
+	. = 0x00000000;
+
+	. = ALIGN(4);
+	.text :
+	{
+		*(.__image_copy_start)
+		CPUDIR/start.o (.text*)
+		board/compulab/cm_t335/built-in.o (.text*)
+		*(.text*)
+	}
+
+	. = ALIGN(4);
+	.rodata : { *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*))) }
+
+	. = ALIGN(4);
+	.data : {
+		*(.data*)
+	}
+
+	. = ALIGN(4);
+
+	. = .;
+
+	. = ALIGN(4);
+	.u_boot_list : {
+		KEEP(*(SORT(.u_boot_list*)));
+	}
+
+	. = ALIGN(4);
+
+	.image_copy_end :
+	{
+		*(.__image_copy_end)
+	}
+
+	.rel_dyn_start :
+	{
+		*(.__rel_dyn_start)
+	}
+
+	.rel.dyn : {
+		*(.rel*)
+	}
+
+	.rel_dyn_end :
+	{
+		*(.__rel_dyn_end)
+	}
+
+	_end = .;
+
+	/*
+	 * Deprecated: this MMU section is used by pxa at present but
+	 * should not be used by new boards/CPUs.
+	 */
+	. = ALIGN(4096);
+	.mmutable : {
+		*(.mmutable)
+	}
+
+/*
+ * Compiler-generated __bss_start and __bss_end, see arch/arm/lib/bss.c
+ * __bss_base and __bss_limit are for linker only (overlay ordering)
+ */
+
+	.bss_start __rel_dyn_start (OVERLAY) : {
+		KEEP(*(.__bss_start));
+		__bss_base = .;
+	}
+
+	.bss __bss_base (OVERLAY) : {
+		*(.bss*)
+		 . = ALIGN(4);
+		 __bss_limit = .;
+	}
+
+	.bss_end __bss_limit (OVERLAY) : {
+		KEEP(*(.__bss_end));
+	}
+
+	/DISCARD/ : { *(.dynsym) }
+	/DISCARD/ : { *(.dynstr*) }
+	/DISCARD/ : { *(.dynamic*) }
+	/DISCARD/ : { *(.plt*) }
+	/DISCARD/ : { *(.interp*) }
+	/DISCARD/ : { *(.gnu*) }
+}
diff --git a/board/compulab/cm_t35/Makefile b/board/compulab/cm_t35/Makefile
index 6e2e1cbb6a..ede250b524 100644
--- a/board/compulab/cm_t35/Makefile
+++ b/board/compulab/cm_t35/Makefile
@@ -7,4 +7,4 @@
 # SPDX-License-Identifier:	GPL-2.0+
 #
 
-obj-y	+= cm_t35.o leds.o
+obj-y	+= cm_t35.o
diff --git a/board/compulab/cm_t35/leds.c b/board/compulab/cm_t35/leds.c
deleted file mode 100644
index 7e2803e3b8..0000000000
--- a/board/compulab/cm_t35/leds.c
+++ /dev/null
@@ -1,33 +0,0 @@
-/*
- * (C) Copyright 2011 - 2013 CompuLab, Ltd. <www.compulab.co.il>
- *
- * Author: Igor Grinberg <grinberg@compulab.co.il>
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#include <common.h>
-#include <status_led.h>
-#include <asm/gpio.h>
-
-static unsigned int leds[] = { GREEN_LED_GPIO };
-
-void __led_init(led_id_t mask, int state)
-{
-	if (gpio_request(leds[mask], "") != 0) {
-		printf("%s: failed requesting GPIO%u\n", __func__, leds[mask]);
-		return;
-	}
-
-	gpio_direction_output(leds[mask], 0);
-}
-
-void __led_set(led_id_t mask, int state)
-{
-	gpio_set_value(leds[mask], state == STATUS_LED_ON);
-}
-
-void __led_toggle(led_id_t mask)
-{
-	gpio_set_value(leds[mask], !gpio_get_value(leds[mask]));
-}
diff --git a/board/dvlhost/u-boot.lds b/board/dvlhost/u-boot.lds
index 0035a0bf07..ebcaf447b8 100644
--- a/board/dvlhost/u-boot.lds
+++ b/board/dvlhost/u-boot.lds
@@ -87,10 +87,13 @@ SECTIONS
 		KEEP(*(.__bss_end));
 	}
 
-	/DISCARD/ : { *(.dynsym) }
-	/DISCARD/ : { *(.dynstr*) }
-	/DISCARD/ : { *(.dynamic*) }
-	/DISCARD/ : { *(.plt*) }
-	/DISCARD/ : { *(.interp*) }
-	/DISCARD/ : { *(.gnu*) }
+	.dynsym _end : { *(.dynsym) }
+	.dynbss : { *(.dynbss) }
+	.dynstr : { *(.dynstr*) }
+	.dynamic : { *(.dynamic*) }
+	.hash : { *(.hash*) }
+	.plt : { *(.plt*) }
+	.interp : { *(.interp*) }
+	.gnu : { *(.gnu*) }
+	.ARM.exidx : { *(.ARM.exidx*) }
 }
diff --git a/board/egnite/ethernut5/ethernut5.c b/board/egnite/ethernut5/ethernut5.c
index 1f5eea56ac..b45213c245 100644
--- a/board/egnite/ethernut5/ethernut5.c
+++ b/board/egnite/ethernut5/ethernut5.c
@@ -71,6 +71,7 @@
 #include <asm/arch/at91_spi.h>
 #include <asm/arch/gpio.h>
 #include <asm/io.h>
+#include <asm/gpio.h>
 
 #include "ethernut5_pwrman.h"
 
@@ -141,7 +142,7 @@ static void ethernut5_nand_hw_init(void)
 	/* Ready pin is optional. */
 	at91_set_pio_input(CONFIG_SYS_NAND_READY_PIN, 1);
 #endif
-	at91_set_pio_output(CONFIG_SYS_NAND_ENABLE_PIN, 1);
+	gpio_direction_output(CONFIG_SYS_NAND_ENABLE_PIN, 1);
 }
 #endif
 
diff --git a/board/esd/meesc/meesc.c b/board/esd/meesc/meesc.c
index 9bf6739081..c5994e0a4a 100644
--- a/board/esd/meesc/meesc.c
+++ b/board/esd/meesc/meesc.c
@@ -12,6 +12,7 @@
 
 #include <common.h>
 #include <asm/io.h>
+#include <asm/gpio.h>
 #include <asm/arch/at91sam9_smc.h>
 #include <asm/arch/at91_common.h>
 #include <asm/arch/at91_pmc.h>
@@ -74,10 +75,10 @@ static void meesc_nand_hw_init(void)
 		&smc->cs[3].mode);
 
 	/* Configure RDY/BSY */
-	at91_set_pio_input(CONFIG_SYS_NAND_READY_PIN, 1);
+	gpio_direction_input(CONFIG_SYS_NAND_READY_PIN);
 
 	/* Enable NandFlash */
-	at91_set_pio_output(CONFIG_SYS_NAND_ENABLE_PIN, 1);
+	gpio_direction_output(CONFIG_SYS_NAND_ENABLE_PIN, 1);
 }
 #endif /* CONFIG_CMD_NAND */
 
diff --git a/board/esd/otc570/otc570.c b/board/esd/otc570/otc570.c
index acc1b31b70..4751d0a9e9 100644
--- a/board/esd/otc570/otc570.c
+++ b/board/esd/otc570/otc570.c
@@ -12,6 +12,7 @@
 
 #include <common.h>
 #include <asm/io.h>
+#include <asm/gpio.h>
 #include <asm/arch/at91sam9_smc.h>
 #include <asm/arch/at91_common.h>
 #include <asm/arch/at91_pmc.h>
@@ -82,10 +83,10 @@ static void otc570_nand_hw_init(void)
 		&smc->cs[3].mode);
 
 	/* Configure RDY/BSY */
-	at91_set_pio_input(CONFIG_SYS_NAND_READY_PIN, 1);
+	gpio_direction_input(CONFIG_SYS_NAND_READY_PIN);
 
 	/* Enable NandFlash */
-	at91_set_pio_output(CONFIG_SYS_NAND_ENABLE_PIN, 1);
+	gpio_direction_output(CONFIG_SYS_NAND_ENABLE_PIN, 1);
 }
 #endif /* CONFIG_CMD_NAND */
 
diff --git a/board/eukrea/cpu9260/cpu9260.c b/board/eukrea/cpu9260/cpu9260.c
index 5e1524e07b..01ecccb8c9 100644
--- a/board/eukrea/cpu9260/cpu9260.c
+++ b/board/eukrea/cpu9260/cpu9260.c
@@ -12,12 +12,12 @@
 
 #include <common.h>
 #include <asm/io.h>
+#include <asm/gpio.h>
 #include <asm/arch/at91sam9260.h>
 #include <asm/arch/at91sam9_smc.h>
 #include <asm/arch/at91_common.h>
 #include <asm/arch/at91_matrix.h>
 #include <asm/arch/at91_pmc.h>
-#include <asm/arch/at91_rstc.h>
 #include <asm/arch/at91_pio.h>
 #include <asm/arch/clk.h>
 #include <asm/arch/hardware.h>
@@ -79,39 +79,24 @@ static void cpu9260_nand_hw_init(void)
 	writel(1 << ATMEL_ID_PIOC, &pmc->pcer);
 
 	/* Configure RDY/BSY */
-	at91_set_pio_input(CONFIG_SYS_NAND_READY_PIN, 1);
+	gpio_direction_input(CONFIG_SYS_NAND_READY_PIN);
 
 	/* Enable NandFlash */
-	at91_set_pio_output(CONFIG_SYS_NAND_ENABLE_PIN, 1);
+	gpio_direction_output(CONFIG_SYS_NAND_ENABLE_PIN, 1);
 }
 #endif
 
 #ifdef CONFIG_MACB
 static void cpu9260_macb_hw_init(void)
 {
-	unsigned long rstcmr;
 	at91_pmc_t *pmc = (at91_pmc_t *) ATMEL_BASE_PMC;
-	at91_rstc_t *rstc = (at91_rstc_t *) ATMEL_BASE_RSTC;
 
 	/* Enable clock */
 	writel(1 << ATMEL_ID_EMAC0, &pmc->pcer);
 
 	at91_set_pio_pullup(AT91_PIO_PORTA, 17, 1);
 
-	rstcmr = readl(&rstc->mr) & AT91_RSTC_MR_ERSTL_MASK;
-
-	/* Need to reset PHY -> 500ms reset */
-	writel(AT91_RSTC_KEY | AT91_RSTC_MR_ERSTL(0xD) |
-				AT91_RSTC_MR_URSTEN, &rstc->mr);
-
-	writel(AT91_RSTC_KEY | AT91_RSTC_CR_EXTRST, &rstc->cr);
-
-	/* Wait for end hardware reset */
-	while (!(readl(&rstc->sr) & AT91_RSTC_SR_NRSTL))
-		;
-
-	/* Restore NRST value */
-	writel(AT91_RSTC_KEY | rstcmr | AT91_RSTC_MR_URSTEN, &rstc->mr);
+	at91_phy_reset();
 
 	at91_macb_hw_init();
 }
diff --git a/board/freescale/mx31ads/u-boot.lds b/board/freescale/mx31ads/u-boot.lds
index 8d5cc9101a..1cca176c38 100644
--- a/board/freescale/mx31ads/u-boot.lds
+++ b/board/freescale/mx31ads/u-boot.lds
@@ -90,13 +90,13 @@ SECTIONS
 		KEEP(*(.__bss_end));
 	}
 
-	/DISCARD/ : { *(.bss*) }
-	/DISCARD/ : { *(.dynsym) }
-	/DISCARD/ : { *(.dynstr*) }
-	/DISCARD/ : { *(.dynsym*) }
-	/DISCARD/ : { *(.dynamic*) }
-	/DISCARD/ : { *(.hash*) }
-	/DISCARD/ : { *(.plt*) }
-	/DISCARD/ : { *(.interp*) }
-	/DISCARD/ : { *(.gnu*) }
+	.dynsym _end : { *(.dynsym) }
+	.dynbss : { *(.dynbss) }
+	.dynstr : { *(.dynstr*) }
+	.dynamic : { *(.dynamic*) }
+	.hash : { *(.hash*) }
+	.plt : { *(.plt*) }
+	.interp : { *(.interp*) }
+	.gnu : { *(.gnu*) }
+	.ARM.exidx : { *(.ARM.exidx*) }
 }
diff --git a/board/isee/igep0033/board.c b/board/isee/igep0033/board.c
index 0b8356dc47..6a8ca2b4c3 100644
--- a/board/isee/igep0033/board.c
+++ b/board/isee/igep0033/board.c
@@ -35,20 +35,16 @@ static const struct ddr_data ddr3_data = {
 	.datawdsratio0 = K4B2G1646EBIH9_WR_DQS,
 	.datafwsratio0 = K4B2G1646EBIH9_PHY_FIFO_WE,
 	.datawrsratio0 = K4B2G1646EBIH9_PHY_WR_DATA,
-	.datadldiff0 = PHY_DLL_LOCK_DIFF,
 };
 
 static const struct cmd_control ddr3_cmd_ctrl_data = {
 	.cmd0csratio = K4B2G1646EBIH9_RATIO,
-	.cmd0dldiff = K4B2G1646EBIH9_DLL_LOCK_DIFF,
 	.cmd0iclkout = K4B2G1646EBIH9_INVERT_CLKOUT,
 
 	.cmd1csratio = K4B2G1646EBIH9_RATIO,
-	.cmd1dldiff = K4B2G1646EBIH9_DLL_LOCK_DIFF,
 	.cmd1iclkout = K4B2G1646EBIH9_INVERT_CLKOUT,
 
 	.cmd2csratio = K4B2G1646EBIH9_RATIO,
-	.cmd2dldiff = K4B2G1646EBIH9_DLL_LOCK_DIFF,
 	.cmd2iclkout = K4B2G1646EBIH9_INVERT_CLKOUT,
 };
 
diff --git a/board/phytec/pcm051/board.c b/board/phytec/pcm051/board.c
index 034886ad5d..68463e78db 100644
--- a/board/phytec/pcm051/board.c
+++ b/board/phytec/pcm051/board.c
@@ -49,25 +49,22 @@ const struct dpll_params *get_dpll_ddr_params(void)
 	return &dpll_ddr;
 }
 
+#ifdef CONFIG_REV1
 static const struct ddr_data ddr3_data = {
 	.datardsratio0 = MT41J256M8HX15E_RD_DQS,
 	.datawdsratio0 = MT41J256M8HX15E_WR_DQS,
 	.datafwsratio0 = MT41J256M8HX15E_PHY_FIFO_WE,
 	.datawrsratio0 = MT41J256M8HX15E_PHY_WR_DATA,
-	.datadldiff0 = PHY_DLL_LOCK_DIFF,
 };
 
 static const struct cmd_control ddr3_cmd_ctrl_data = {
 	.cmd0csratio = MT41J256M8HX15E_RATIO,
-	.cmd0dldiff = MT41J256M8HX15E_DLL_LOCK_DIFF,
 	.cmd0iclkout = MT41J256M8HX15E_INVERT_CLKOUT,
 
 	.cmd1csratio = MT41J256M8HX15E_RATIO,
-	.cmd1dldiff = MT41J256M8HX15E_DLL_LOCK_DIFF,
 	.cmd1iclkout = MT41J256M8HX15E_INVERT_CLKOUT,
 
 	.cmd2csratio = MT41J256M8HX15E_RATIO,
-	.cmd2dldiff = MT41J256M8HX15E_DLL_LOCK_DIFF,
 	.cmd2iclkout = MT41J256M8HX15E_INVERT_CLKOUT,
 };
 
@@ -82,6 +79,48 @@ static struct emif_regs ddr3_emif_reg_data = {
 				PHY_EN_DYN_PWRDN,
 };
 
+void sdram_init(void)
+{
+	config_ddr(DDR_CLK_MHZ, MT41J256M8HX15E_IOCTRL_VALUE, &ddr3_data,
+		   &ddr3_cmd_ctrl_data, &ddr3_emif_reg_data, 0);
+}
+#else
+static const struct ddr_data ddr3_data = {
+	.datardsratio0 = MT41K256M16HA125E_RD_DQS,
+	.datawdsratio0 = MT41K256M16HA125E_WR_DQS,
+	.datafwsratio0 = MT41K256M16HA125E_PHY_FIFO_WE,
+	.datawrsratio0 = MT41K256M16HA125E_PHY_WR_DATA,
+};
+
+static const struct cmd_control ddr3_cmd_ctrl_data = {
+	.cmd0csratio = MT41K256M16HA125E_RATIO,
+	.cmd0iclkout = MT41K256M16HA125E_INVERT_CLKOUT,
+
+	.cmd1csratio = MT41K256M16HA125E_RATIO,
+	.cmd1iclkout = MT41K256M16HA125E_INVERT_CLKOUT,
+
+	.cmd2csratio = MT41K256M16HA125E_RATIO,
+	.cmd2iclkout = MT41K256M16HA125E_INVERT_CLKOUT,
+};
+
+static struct emif_regs ddr3_emif_reg_data = {
+	.sdram_config = MT41K256M16HA125E_EMIF_SDCFG,
+	.ref_ctrl = MT41K256M16HA125E_EMIF_SDREF,
+	.sdram_tim1 = MT41K256M16HA125E_EMIF_TIM1,
+	.sdram_tim2 = MT41K256M16HA125E_EMIF_TIM2,
+	.sdram_tim3 = MT41K256M16HA125E_EMIF_TIM3,
+	.zq_config = MT41K256M16HA125E_ZQ_CFG,
+	.emif_ddr_phy_ctlr_1 = MT41K256M16HA125E_EMIF_READ_LATENCY |
+				PHY_EN_DYN_PWRDN,
+};
+
+void sdram_init(void)
+{
+	config_ddr(DDR_CLK_MHZ, MT41K256M16HA125E_IOCTRL_VALUE, &ddr3_data,
+		   &ddr3_cmd_ctrl_data, &ddr3_emif_reg_data, 0);
+}
+#endif
+
 void set_uart_mux_conf(void)
 {
 	enable_uart0_pin_mux();
@@ -95,12 +134,6 @@ void set_mux_conf_regs(void)
 
 	enable_board_pin_mux();
 }
-
-void sdram_init(void)
-{
-	config_ddr(DDR_CLK_MHZ, MT41J256M8HX15E_IOCTRL_VALUE, &ddr3_data,
-			&ddr3_cmd_ctrl_data, &ddr3_emif_reg_data, 0);
-}
 #endif
 
 /*
diff --git a/board/renesas/koelsch/Makefile b/board/renesas/koelsch/Makefile
new file mode 100644
index 0000000000..b4d0183b3b
--- /dev/null
+++ b/board/renesas/koelsch/Makefile
@@ -0,0 +1,9 @@
+#
+# board/renesas/koelsch/Makefile
+#
+# Copyright (C) 2013 Renesas Electronics Corporation
+#
+# SPDX-License-Identifier: GPL-2.0
+#
+
+obj-y	:= koelsch.o qos.o
diff --git a/board/renesas/koelsch/koelsch.c b/board/renesas/koelsch/koelsch.c
new file mode 100644
index 0000000000..7153f652b5
--- /dev/null
+++ b/board/renesas/koelsch/koelsch.c
@@ -0,0 +1,283 @@
+/*
+ * board/renesas/koelsch/koelsch.c
+ *
+ * Copyright (C) 2013 Renesas Electronics Corporation
+ *
+ * SPDX-License-Identifier: GPL-2.0
+ *
+ */
+
+#include <common.h>
+#include <malloc.h>
+#include <asm/processor.h>
+#include <asm/mach-types.h>
+#include <asm/io.h>
+#include <asm/errno.h>
+#include <asm/arch/sys_proto.h>
+#include <asm/gpio.h>
+#include <asm/arch/rmobile.h>
+#include <i2c.h>
+#include "qos.h"
+
+DECLARE_GLOBAL_DATA_PTR;
+
+#define s_init_wait(cnt) \
+	({	\
+		u32 i = 0x10000 * cnt;	\
+		while (i > 0)	\
+			i--;	\
+	})
+
+
+#define dbpdrgd_check(bsc) \
+	({	\
+		while ((readl(&bsc->dbpdrgd) & 0x1) != 0x1)	\
+			;	\
+	})
+
+#if defined(CONFIG_NORFLASH)
+static void bsc_init(void)
+{
+	struct r8a7791_lbsc *lbsc = (struct r8a7791_lbsc *)LBSC_BASE;
+	struct r8a7791_dbsc3 *dbsc3_0 = (struct r8a7791_dbsc3 *)DBSC3_0_BASE;
+
+	/* LBSC */
+	writel(0x00000020, &lbsc->cs0ctrl);
+	writel(0x00000020, &lbsc->cs1ctrl);
+	writel(0x00002020, &lbsc->ecs0ctrl);
+	writel(0x00002020, &lbsc->ecs1ctrl);
+
+	writel(0x077F077F, &lbsc->cswcr0);
+	writel(0x077F077F, &lbsc->cswcr1);
+	writel(0x077F077F, &lbsc->ecswcr0);
+	writel(0x077F077F, &lbsc->ecswcr1);
+
+	/* DBSC3 */
+	s_init_wait(10);
+
+	writel(0x0000A55A, &dbsc3_0->dbpdlck);
+	writel(0x00000001, &dbsc3_0->dbpdrga);
+	writel(0x80000000, &dbsc3_0->dbpdrgd);
+	writel(0x00000004, &dbsc3_0->dbpdrga);
+	dbpdrgd_check(dbsc3_0);
+
+	writel(0x00000006, &dbsc3_0->dbpdrga);
+	writel(0x0001C000, &dbsc3_0->dbpdrgd);
+
+	writel(0x00000023, &dbsc3_0->dbpdrga);
+	writel(0x00FD2480, &dbsc3_0->dbpdrgd);
+
+	writel(0x00000010, &dbsc3_0->dbpdrga);
+	writel(0xF004649B, &dbsc3_0->dbpdrgd);
+
+	writel(0x0000000F, &dbsc3_0->dbpdrga);
+	writel(0x00181EE4, &dbsc3_0->dbpdrgd);
+
+	writel(0x0000000E, &dbsc3_0->dbpdrga);
+	writel(0x33C03812, &dbsc3_0->dbpdrgd);
+
+	writel(0x00000003, &dbsc3_0->dbpdrga);
+	writel(0x0300C481, &dbsc3_0->dbpdrgd);
+
+	writel(0x00000007, &dbsc3_0->dbkind);
+	writel(0x10030A02, &dbsc3_0->dbconf0);
+	writel(0x00000001, &dbsc3_0->dbphytype);
+	writel(0x00000000, &dbsc3_0->dbbl);
+	writel(0x0000000B, &dbsc3_0->dbtr0);
+	writel(0x00000008, &dbsc3_0->dbtr1);
+	writel(0x00000000, &dbsc3_0->dbtr2);
+	writel(0x0000000B, &dbsc3_0->dbtr3);
+	writel(0x000C000B, &dbsc3_0->dbtr4);
+	writel(0x00000027, &dbsc3_0->dbtr5);
+	writel(0x0000001C, &dbsc3_0->dbtr6);
+	writel(0x00000005, &dbsc3_0->dbtr7);
+	writel(0x00000018, &dbsc3_0->dbtr8);
+	writel(0x00000008, &dbsc3_0->dbtr9);
+	writel(0x0000000C, &dbsc3_0->dbtr10);
+	writel(0x00000009, &dbsc3_0->dbtr11);
+	writel(0x00000012, &dbsc3_0->dbtr12);
+	writel(0x000000D0, &dbsc3_0->dbtr13);
+	writel(0x00140005, &dbsc3_0->dbtr14);
+	writel(0x00050004, &dbsc3_0->dbtr15);
+	writel(0x70233005, &dbsc3_0->dbtr16);
+	writel(0x000C0000, &dbsc3_0->dbtr17);
+	writel(0x00000300, &dbsc3_0->dbtr18);
+	writel(0x00000040, &dbsc3_0->dbtr19);
+	writel(0x00000001, &dbsc3_0->dbrnk0);
+	writel(0x00020001, &dbsc3_0->dbadj0);
+	writel(0x20082008, &dbsc3_0->dbadj2);
+	writel(0x00020002, &dbsc3_0->dbwt0cnf0);
+	writel(0x0000000F, &dbsc3_0->dbwt0cnf4);
+
+	writel(0x00000015, &dbsc3_0->dbpdrga);
+	writel(0x00000D70, &dbsc3_0->dbpdrgd);
+
+	writel(0x00000016, &dbsc3_0->dbpdrga);
+	writel(0x00000006, &dbsc3_0->dbpdrgd);
+
+	writel(0x00000017, &dbsc3_0->dbpdrga);
+	writel(0x00000018, &dbsc3_0->dbpdrgd);
+
+	writel(0x00000012, &dbsc3_0->dbpdrga);
+	writel(0x9D5CBB66, &dbsc3_0->dbpdrgd);
+
+	writel(0x00000013, &dbsc3_0->dbpdrga);
+	writel(0x1A868300, &dbsc3_0->dbpdrgd);
+
+	writel(0x00000023, &dbsc3_0->dbpdrga);
+	writel(0x00FDB6C0, &dbsc3_0->dbpdrgd);
+
+	writel(0x00000014, &dbsc3_0->dbpdrga);
+	writel(0x300214D8, &dbsc3_0->dbpdrgd);
+
+	writel(0x0000001A, &dbsc3_0->dbpdrga);
+	writel(0x930035C7, &dbsc3_0->dbpdrgd);
+
+	writel(0x00000060, &dbsc3_0->dbpdrga);
+	writel(0x330657B2, &dbsc3_0->dbpdrgd);
+
+	writel(0x00000011, &dbsc3_0->dbpdrga);
+	writel(0x1000040B, &dbsc3_0->dbpdrgd);
+
+	writel(0x0000FA00, &dbsc3_0->dbcmd);
+	writel(0x00000001, &dbsc3_0->dbpdrga);
+	writel(0x00000071, &dbsc3_0->dbpdrgd);
+
+	writel(0x00000004, &dbsc3_0->dbpdrga);
+	dbpdrgd_check(dbsc3_0);
+
+	writel(0x0000FA00, &dbsc3_0->dbcmd);
+	writel(0x2100FA00, &dbsc3_0->dbcmd);
+	writel(0x0000FA00, &dbsc3_0->dbcmd);
+	writel(0x0000FA00, &dbsc3_0->dbcmd);
+	writel(0x0000FA00, &dbsc3_0->dbcmd);
+	writel(0x0000FA00, &dbsc3_0->dbcmd);
+	writel(0x0000FA00, &dbsc3_0->dbcmd);
+	writel(0x0000FA00, &dbsc3_0->dbcmd);
+	writel(0x0000FA00, &dbsc3_0->dbcmd);
+
+	writel(0x110000DB, &dbsc3_0->dbcmd);
+
+	writel(0x00000001, &dbsc3_0->dbpdrga);
+	writel(0x00000181, &dbsc3_0->dbpdrgd);
+
+	writel(0x00000004, &dbsc3_0->dbpdrga);
+	dbpdrgd_check(dbsc3_0);
+
+	writel(0x00000001, &dbsc3_0->dbpdrga);
+	writel(0x0000FE01, &dbsc3_0->dbpdrgd);
+
+	writel(0x00000004, &dbsc3_0->dbpdrga);
+	dbpdrgd_check(dbsc3_0);
+
+	writel(0x00000000, &dbsc3_0->dbbs0cnt1);
+	writel(0x01004C20, &dbsc3_0->dbcalcnf);
+	writel(0x014000AA, &dbsc3_0->dbcaltr);
+	writel(0x00000140, &dbsc3_0->dbrfcnf0);
+	writel(0x00081860, &dbsc3_0->dbrfcnf1);
+	writel(0x00010000, &dbsc3_0->dbrfcnf2);
+	writel(0x00000001, &dbsc3_0->dbrfen);
+	writel(0x00000001, &dbsc3_0->dbacen);
+}
+#else
+#define bsc_init() do {} while (0)
+#endif /* CONFIG_NORFLASH */
+
+void s_init(void)
+{
+	struct r8a7791_rwdt *rwdt = (struct r8a7791_rwdt *)RWDT_BASE;
+	struct r8a7791_swdt *swdt = (struct r8a7791_swdt *)SWDT_BASE;
+
+	/* Watchdog init */
+	writel(0xA5A5A500, &rwdt->rwtcsra);
+	writel(0xA5A5A500, &swdt->swtcsra);
+
+	/* QoS */
+	qos_init();
+
+	/* BSC */
+	bsc_init();
+}
+
+#define MSTPSR1		0xE6150038
+#define SMSTPCR1	0xE6150134
+#define TMU0_MSTP125	(1 << 25)
+
+#define MSTPSR7		0xE61501C4
+#define SMSTPCR7	0xE615014C
+#define SCIF0_MSTP721	(1 << 21)
+
+#define PMMR	0xE6060000
+#define GPSR4	0xE6060014
+#define IPSR14	0xE6060058
+
+#define set_guard_reg(addr, mask, value)	\
+{ \
+	u32 val; \
+	val = (readl(addr) & ~(mask)) | (value); \
+	writel(~val, PMMR); \
+	writel(val, addr); \
+}
+
+#define mstp_setbits(type, addr, saddr, set) \
+	out_##type((saddr), in_##type(addr) | (set))
+#define mstp_clrbits(type, addr, saddr, clear) \
+	out_##type((saddr), in_##type(addr) & ~(clear))
+#define mstp_setbits_le32(addr, saddr, set) \
+	mstp_setbits(le32, addr, saddr, set)
+#define mstp_clrbits_le32(addr, saddr, clear)   \
+	mstp_clrbits(le32, addr, saddr, clear)
+
+int board_early_init_f(void)
+{
+	mstp_clrbits_le32(MSTPSR1, SMSTPCR1, TMU0_MSTP125);
+
+#if defined(CONFIG_NORFLASH)
+	/* SCIF0 */
+	set_guard_reg(GPSR4, 0x34000000, 0x00000000);
+	set_guard_reg(IPSR14, 0x00000FC7, 0x00000481);
+	set_guard_reg(GPSR4, 0x00000000, 0x34000000);
+#endif
+
+	mstp_clrbits_le32(MSTPSR7, SMSTPCR7, SCIF0_MSTP721);
+
+	return 0;
+}
+
+int board_init(void)
+{
+	/* adress of boot parameters */
+	gd->bd->bi_boot_params = KOELSCH_SDRAM_BASE + 0x100;
+
+	/* Init PFC controller */
+	r8a7791_pinmux_init();
+
+	return 0;
+}
+
+int dram_init(void)
+{
+	gd->bd->bi_dram[0].start = CONFIG_SYS_SDRAM_BASE;
+	gd->ram_size = CONFIG_SYS_SDRAM_SIZE;
+
+	return 0;
+}
+
+const struct rmobile_sysinfo sysinfo = {
+	CONFIG_RMOBILE_BOARD_STRING
+};
+
+void dram_init_banksize(void)
+{
+	gd->bd->bi_dram[0].start = KOELSCH_SDRAM_BASE;
+	gd->bd->bi_dram[0].size = KOELSCH_SDRAM_SIZE;
+}
+
+int board_late_init(void)
+{
+	return 0;
+}
+
+void reset_cpu(ulong addr)
+{
+}
diff --git a/board/renesas/koelsch/qos.c b/board/renesas/koelsch/qos.c
new file mode 100644
index 0000000000..7f88f7da8d
--- /dev/null
+++ b/board/renesas/koelsch/qos.c
@@ -0,0 +1,1220 @@
+/*
+ * board/renesas/koelsch/qos.c
+ *
+ * Copyright (C) 2013 Renesas Electronics Corporation
+ *
+ * SPDX-License-Identifier: GPL-2.0
+ *
+ */
+
+#include <common.h>
+#include <asm/processor.h>
+#include <asm/mach-types.h>
+#include <asm/io.h>
+#include <asm/arch/rmobile.h>
+
+/* QoS version 0.23 */
+
+enum {
+	DBSC3_00, DBSC3_01, DBSC3_02, DBSC3_03, DBSC3_04,
+	DBSC3_05, DBSC3_06, DBSC3_07, DBSC3_08, DBSC3_09,
+	DBSC3_10, DBSC3_11, DBSC3_12, DBSC3_13, DBSC3_14,
+	DBSC3_15,
+	DBSC3_NR,
+};
+
+static u32 dbsc3_0_r_qos_addr[DBSC3_NR] = {
+	[DBSC3_00] = DBSC3_0_QOS_R0_BASE,
+	[DBSC3_01] = DBSC3_0_QOS_R1_BASE,
+	[DBSC3_02] = DBSC3_0_QOS_R2_BASE,
+	[DBSC3_03] = DBSC3_0_QOS_R3_BASE,
+	[DBSC3_04] = DBSC3_0_QOS_R4_BASE,
+	[DBSC3_05] = DBSC3_0_QOS_R5_BASE,
+	[DBSC3_06] = DBSC3_0_QOS_R6_BASE,
+	[DBSC3_07] = DBSC3_0_QOS_R7_BASE,
+	[DBSC3_08] = DBSC3_0_QOS_R8_BASE,
+	[DBSC3_09] = DBSC3_0_QOS_R9_BASE,
+	[DBSC3_10] = DBSC3_0_QOS_R10_BASE,
+	[DBSC3_11] = DBSC3_0_QOS_R11_BASE,
+	[DBSC3_12] = DBSC3_0_QOS_R12_BASE,
+	[DBSC3_13] = DBSC3_0_QOS_R13_BASE,
+	[DBSC3_14] = DBSC3_0_QOS_R14_BASE,
+	[DBSC3_15] = DBSC3_0_QOS_R15_BASE,
+};
+
+static u32 dbsc3_0_w_qos_addr[DBSC3_NR] = {
+	[DBSC3_00] = DBSC3_0_QOS_W0_BASE,
+	[DBSC3_01] = DBSC3_0_QOS_W1_BASE,
+	[DBSC3_02] = DBSC3_0_QOS_W2_BASE,
+	[DBSC3_03] = DBSC3_0_QOS_W3_BASE,
+	[DBSC3_04] = DBSC3_0_QOS_W4_BASE,
+	[DBSC3_05] = DBSC3_0_QOS_W5_BASE,
+	[DBSC3_06] = DBSC3_0_QOS_W6_BASE,
+	[DBSC3_07] = DBSC3_0_QOS_W7_BASE,
+	[DBSC3_08] = DBSC3_0_QOS_W8_BASE,
+	[DBSC3_09] = DBSC3_0_QOS_W9_BASE,
+	[DBSC3_10] = DBSC3_0_QOS_W10_BASE,
+	[DBSC3_11] = DBSC3_0_QOS_W11_BASE,
+	[DBSC3_12] = DBSC3_0_QOS_W12_BASE,
+	[DBSC3_13] = DBSC3_0_QOS_W13_BASE,
+	[DBSC3_14] = DBSC3_0_QOS_W14_BASE,
+	[DBSC3_15] = DBSC3_0_QOS_W15_BASE,
+};
+
+static u32 dbsc3_1_r_qos_addr[DBSC3_NR] = {
+	[DBSC3_00] = DBSC3_1_QOS_R0_BASE,
+	[DBSC3_01] = DBSC3_1_QOS_R1_BASE,
+	[DBSC3_02] = DBSC3_1_QOS_R2_BASE,
+	[DBSC3_03] = DBSC3_1_QOS_R3_BASE,
+	[DBSC3_04] = DBSC3_1_QOS_R4_BASE,
+	[DBSC3_05] = DBSC3_1_QOS_R5_BASE,
+	[DBSC3_06] = DBSC3_1_QOS_R6_BASE,
+	[DBSC3_07] = DBSC3_1_QOS_R7_BASE,
+	[DBSC3_08] = DBSC3_1_QOS_R8_BASE,
+	[DBSC3_09] = DBSC3_1_QOS_R9_BASE,
+	[DBSC3_10] = DBSC3_1_QOS_R10_BASE,
+	[DBSC3_11] = DBSC3_1_QOS_R11_BASE,
+	[DBSC3_12] = DBSC3_1_QOS_R12_BASE,
+	[DBSC3_13] = DBSC3_1_QOS_R13_BASE,
+	[DBSC3_14] = DBSC3_1_QOS_R14_BASE,
+	[DBSC3_15] = DBSC3_1_QOS_R15_BASE,
+};
+
+static u32 dbsc3_1_w_qos_addr[DBSC3_NR] = {
+	[DBSC3_00] = DBSC3_1_QOS_W0_BASE,
+	[DBSC3_01] = DBSC3_1_QOS_W1_BASE,
+	[DBSC3_02] = DBSC3_1_QOS_W2_BASE,
+	[DBSC3_03] = DBSC3_1_QOS_W3_BASE,
+	[DBSC3_04] = DBSC3_1_QOS_W4_BASE,
+	[DBSC3_05] = DBSC3_1_QOS_W5_BASE,
+	[DBSC3_06] = DBSC3_1_QOS_W6_BASE,
+	[DBSC3_07] = DBSC3_1_QOS_W7_BASE,
+	[DBSC3_08] = DBSC3_1_QOS_W8_BASE,
+	[DBSC3_09] = DBSC3_1_QOS_W9_BASE,
+	[DBSC3_10] = DBSC3_1_QOS_W10_BASE,
+	[DBSC3_11] = DBSC3_1_QOS_W11_BASE,
+	[DBSC3_12] = DBSC3_1_QOS_W12_BASE,
+	[DBSC3_13] = DBSC3_1_QOS_W13_BASE,
+	[DBSC3_14] = DBSC3_1_QOS_W14_BASE,
+	[DBSC3_15] = DBSC3_1_QOS_W15_BASE,
+};
+
+void qos_init(void)
+{
+	int i;
+	struct r8a7791_s3c *s3c;
+	struct r8a7791_s3c_qos *s3c_qos;
+	struct r8a7791_dbsc3_qos *qos_addr;
+	struct r8a7791_mxi *mxi;
+	struct r8a7791_mxi_qos *mxi_qos;
+	struct r8a7791_axi_qos *axi_qos;
+
+	/* DBSC DBADJ2 */
+	writel(0x20042004, DBSC3_0_DBADJ2);
+
+	/* S3C -QoS */
+	s3c = (struct r8a7791_s3c *)S3C_BASE;
+	writel(0x00FF1B1D, &s3c->s3cadsplcr);
+	writel(0x1F0D0C0C, &s3c->s3crorr);
+	writel(0x1F0D0C0A, &s3c->s3cworr);
+
+	/* QoS Control Registers */
+	s3c_qos = (struct r8a7791_s3c_qos *)S3C_QOS_CCI0_BASE;
+	writel(0x00890089, &s3c_qos->s3cqos0);
+	writel(0x20960010, &s3c_qos->s3cqos1);
+	writel(0x20302030, &s3c_qos->s3cqos2);
+	writel(0x20AA2200, &s3c_qos->s3cqos3);
+	writel(0x00002032, &s3c_qos->s3cqos4);
+	writel(0x20960010, &s3c_qos->s3cqos5);
+	writel(0x20302030, &s3c_qos->s3cqos6);
+	writel(0x20AA2200, &s3c_qos->s3cqos7);
+	writel(0x00002032, &s3c_qos->s3cqos8);
+
+	s3c_qos = (struct r8a7791_s3c_qos *)S3C_QOS_CCI1_BASE;
+	writel(0x00890089, &s3c_qos->s3cqos0);
+	writel(0x20960010, &s3c_qos->s3cqos1);
+	writel(0x20302030, &s3c_qos->s3cqos2);
+	writel(0x20AA2200, &s3c_qos->s3cqos3);
+	writel(0x00002032, &s3c_qos->s3cqos4);
+	writel(0x20960010, &s3c_qos->s3cqos5);
+	writel(0x20302030, &s3c_qos->s3cqos6);
+	writel(0x20AA2200, &s3c_qos->s3cqos7);
+	writel(0x00002032, &s3c_qos->s3cqos8);
+
+	s3c_qos = (struct r8a7791_s3c_qos *)S3C_QOS_MXI_BASE;
+	writel(0x00820082, &s3c_qos->s3cqos0);
+	writel(0x20960020, &s3c_qos->s3cqos1);
+	writel(0x20302030, &s3c_qos->s3cqos2);
+	writel(0x20AA20DC, &s3c_qos->s3cqos3);
+	writel(0x00002032, &s3c_qos->s3cqos4);
+	writel(0x20960020, &s3c_qos->s3cqos5);
+	writel(0x20302030, &s3c_qos->s3cqos6);
+	writel(0x20AA20DC, &s3c_qos->s3cqos7);
+	writel(0x00002032, &s3c_qos->s3cqos8);
+
+	s3c_qos = (struct r8a7791_s3c_qos *)S3C_QOS_AXI_BASE;
+	writel(0x00820082, &s3c_qos->s3cqos0);
+	writel(0x20960020, &s3c_qos->s3cqos1);
+	writel(0x20302030, &s3c_qos->s3cqos2);
+	writel(0x20AA20FA, &s3c_qos->s3cqos3);
+	writel(0x00002032, &s3c_qos->s3cqos4);
+	writel(0x20960020, &s3c_qos->s3cqos5);
+	writel(0x20302030, &s3c_qos->s3cqos6);
+	writel(0x20AA20FA, &s3c_qos->s3cqos7);
+	writel(0x00002032, &s3c_qos->s3cqos8);
+
+	/* DBSC -QoS */
+	/* DBSC0 - Read */
+	for (i = DBSC3_00; i < DBSC3_NR; i++) {
+		qos_addr = (struct r8a7791_dbsc3_qos *)dbsc3_0_r_qos_addr[i];
+		writel(0x00000002, &qos_addr->dblgcnt);
+		writel(0x00002096, &qos_addr->dbtmval0);
+		writel(0x00002064, &qos_addr->dbtmval1);
+		writel(0x00002032, &qos_addr->dbtmval2);
+		writel(0x00001FB0, &qos_addr->dbtmval3);
+		writel(0x00000001, &qos_addr->dbrqctr);
+		writel(0x00002078, &qos_addr->dbthres0);
+		writel(0x0000204B, &qos_addr->dbthres1);
+		writel(0x00001FE7, &qos_addr->dbthres2);
+		writel(0x00000001, &qos_addr->dblgqon);
+	}
+
+	/* DBSC0 - Write */
+	for (i = DBSC3_00; i < DBSC3_NR; i++) {
+		qos_addr = (struct r8a7791_dbsc3_qos *)dbsc3_0_w_qos_addr[i];
+		writel(0x00000002, &qos_addr->dblgcnt);
+		writel(0x000020EB, &qos_addr->dbtmval0);
+		writel(0x0000206E, &qos_addr->dbtmval1);
+		writel(0x00002050, &qos_addr->dbtmval2);
+		writel(0x0000203A, &qos_addr->dbtmval3);
+		writel(0x00000001, &qos_addr->dbrqctr);
+		writel(0x00002078, &qos_addr->dbthres0);
+		writel(0x0000205A, &qos_addr->dbthres1);
+		writel(0x0000203C, &qos_addr->dbthres2);
+		writel(0x00000001, &qos_addr->dblgqon);
+	}
+
+	/* DBSC1 - Read */
+	for (i = DBSC3_00; i < DBSC3_NR; i++) {
+		qos_addr = (struct r8a7791_dbsc3_qos *)dbsc3_1_r_qos_addr[i];
+		writel(0x00000002, &qos_addr->dblgcnt);
+		writel(0x00002096, &qos_addr->dbtmval0);
+		writel(0x00002064, &qos_addr->dbtmval1);
+		writel(0x00002032, &qos_addr->dbtmval2);
+		writel(0x00001FB0, &qos_addr->dbtmval3);
+		writel(0x00000001, &qos_addr->dbrqctr);
+		writel(0x00002078, &qos_addr->dbthres0);
+		writel(0x0000204B, &qos_addr->dbthres1);
+		writel(0x00001FE7, &qos_addr->dbthres2);
+		writel(0x00000001, &qos_addr->dblgqon);
+	}
+
+	/* DBSC1 - Write */
+	for (i = DBSC3_00; i < DBSC3_NR; i++) {
+		qos_addr = (struct r8a7791_dbsc3_qos *)dbsc3_1_w_qos_addr[i];
+		writel(0x00000002, &qos_addr->dblgcnt);
+		writel(0x000020EB, &qos_addr->dbtmval0);
+		writel(0x0000206E, &qos_addr->dbtmval1);
+		writel(0x00002050, &qos_addr->dbtmval2);
+		writel(0x0000203A, &qos_addr->dbtmval3);
+		writel(0x00000001, &qos_addr->dbrqctr);
+		writel(0x00002078, &qos_addr->dbthres0);
+		writel(0x0000205A, &qos_addr->dbthres1);
+		writel(0x0000203C, &qos_addr->dbthres2);
+		writel(0x00000001, &qos_addr->dblgqon);
+	}
+
+	/* CCI-400 -QoS */
+	writel(0x20001000, CCI_400_MAXOT_1);
+	writel(0x20001000, CCI_400_MAXOT_2);
+	writel(0x0000000C, CCI_400_QOSCNTL_1);
+	writel(0x0000000C, CCI_400_QOSCNTL_2);
+
+	/* MXI -QoS */
+	/* Transaction Control (MXI) */
+	mxi = (struct r8a7791_mxi *)MXI_BASE;
+	writel(0x00000013, &mxi->mxrtcr);
+	writel(0x00000013, &mxi->mxwtcr);
+	writel(0x00780080, &mxi->mxsaar0);
+	writel(0x02000800, &mxi->mxsaar1);
+
+	/* QoS Control (MXI) */
+	mxi_qos = (struct r8a7791_mxi_qos *)MXI_QOS_BASE;
+	writel(0x0000000C, &mxi_qos->vspdu0);
+	writel(0x0000000C, &mxi_qos->vspdu1);
+	writel(0x0000000D, &mxi_qos->du0);
+	writel(0x0000000D, &mxi_qos->du1);
+
+	/* AXI -QoS */
+	/* Transaction Control (MXI) */
+	axi_qos = (struct r8a7791_axi_qos *)SYS_AXI_SYX64TO128_BASE;
+	writel(0x00000002, &axi_qos->qosconf);
+	writel(0x00002245, &axi_qos->qosctset0);
+	writel(0x00002096, &axi_qos->qosctset1);
+	writel(0x00002030, &axi_qos->qosctset2);
+	writel(0x00002030, &axi_qos->qosctset3);
+	writel(0x00000001, &axi_qos->qosreqctr);
+	writel(0x00002064, &axi_qos->qosthres0);
+	writel(0x00002004, &axi_qos->qosthres1);
+	writel(0x00000000, &axi_qos->qosthres2);
+	writel(0x00000001, &axi_qos->qosqon);
+
+	axi_qos = (struct r8a7791_axi_qos *)SYS_AXI_AVB_BASE;
+	writel(0x00000000, &axi_qos->qosconf);
+	writel(0x000020A6, &axi_qos->qosctset0);
+	writel(0x00000001, &axi_qos->qosreqctr);
+	writel(0x00002064, &axi_qos->qosthres0);
+	writel(0x00002004, &axi_qos->qosthres1);
+	writel(0x00000000, &axi_qos->qosthres2);
+	writel(0x00000001, &axi_qos->qosqon);
+
+	axi_qos = (struct r8a7791_axi_qos *)SYS_AXI_G2D_BASE;
+	writel(0x00000000, &axi_qos->qosconf);
+	writel(0x000020A6, &axi_qos->qosctset0);
+	writel(0x00000001, &axi_qos->qosreqctr);
+	writel(0x00002064, &axi_qos->qosthres0);
+	writel(0x00002004, &axi_qos->qosthres1);
+	writel(0x00000000, &axi_qos->qosthres2);
+	writel(0x00000001, &axi_qos->qosqon);
+
+	axi_qos = (struct r8a7791_axi_qos *)SYS_AXI_IMP0_BASE;
+	writel(0x00000000, &axi_qos->qosconf);
+	writel(0x00002021, &axi_qos->qosctset0);
+	writel(0x00000001, &axi_qos->qosreqctr);
+	writel(0x00002064, &axi_qos->qosthres0);
+	writel(0x00002004, &axi_qos->qosthres1);
+	writel(0x00000000, &axi_qos->qosthres2);
+	writel(0x00000001, &axi_qos->qosqon);
+
+	axi_qos = (struct r8a7791_axi_qos *)SYS_AXI_IMP1_BASE;
+	writel(0x00000000, &axi_qos->qosconf);
+	writel(0x00002037, &axi_qos->qosctset0);
+	writel(0x00000001, &axi_qos->qosreqctr);
+	writel(0x00002064, &axi_qos->qosthres0);
+	writel(0x00002004, &axi_qos->qosthres1);
+	writel(0x00000000, &axi_qos->qosthres2);
+	writel(0x00000001, &axi_qos->qosqon);
+
+	axi_qos = (struct r8a7791_axi_qos *)SYS_AXI_IMUX0_BASE;
+	writel(0x00000002, &axi_qos->qosconf);
+	writel(0x00002245, &axi_qos->qosctset0);
+	writel(0x00002096, &axi_qos->qosctset1);
+	writel(0x00002030, &axi_qos->qosctset2);
+	writel(0x00002030, &axi_qos->qosctset3);
+	writel(0x00000001, &axi_qos->qosreqctr);
+	writel(0x00002064, &axi_qos->qosthres0);
+	writel(0x00002004, &axi_qos->qosthres1);
+	writel(0x00000000, &axi_qos->qosthres2);
+	writel(0x00000001, &axi_qos->qosqon);
+
+	axi_qos = (struct r8a7791_axi_qos *)SYS_AXI_IMUX1_BASE;
+	writel(0x00000002, &axi_qos->qosconf);
+	writel(0x00002245, &axi_qos->qosctset0);
+	writel(0x00002096, &axi_qos->qosctset1);
+	writel(0x00002030, &axi_qos->qosctset2);
+	writel(0x00002030, &axi_qos->qosctset3);
+	writel(0x00000001, &axi_qos->qosreqctr);
+	writel(0x00002064, &axi_qos->qosthres0);
+	writel(0x00002004, &axi_qos->qosthres1);
+	writel(0x00000000, &axi_qos->qosthres2);
+	writel(0x00000001, &axi_qos->qosqon);
+
+	axi_qos = (struct r8a7791_axi_qos *)SYS_AXI_IMUX2_BASE;
+	writel(0x00000002, &axi_qos->qosconf);
+	writel(0x00002245, &axi_qos->qosctset0);
+	writel(0x00002096, &axi_qos->qosctset1);
+	writel(0x00002030, &axi_qos->qosctset2);
+	writel(0x00002030, &axi_qos->qosctset3);
+	writel(0x00000001, &axi_qos->qosreqctr);
+	writel(0x00002064, &axi_qos->qosthres0);
+	writel(0x00002004, &axi_qos->qosthres1);
+	writel(0x00000000, &axi_qos->qosthres2);
+	writel(0x00000001, &axi_qos->qosqon);
+
+	axi_qos = (struct r8a7791_axi_qos *)SYS_AXI_LBS_BASE;
+	writel(0x00000000, &axi_qos->qosconf);
+	writel(0x0000214C, &axi_qos->qosctset0);
+	writel(0x00000001, &axi_qos->qosreqctr);
+	writel(0x00002064, &axi_qos->qosthres0);
+	writel(0x00002004, &axi_qos->qosthres1);
+	writel(0x00000000, &axi_qos->qosthres2);
+	writel(0x00000001, &axi_qos->qosqon);
+
+	axi_qos = (struct r8a7791_axi_qos *)SYS_AXI_MMUDS_BASE;
+	writel(0x00000001, &axi_qos->qosconf);
+	writel(0x00002004, &axi_qos->qosctset0);
+	writel(0x00002096, &axi_qos->qosctset1);
+	writel(0x00002030, &axi_qos->qosctset2);
+	writel(0x00002030, &axi_qos->qosctset3);
+	writel(0x00000001, &axi_qos->qosreqctr);
+	writel(0x00002064, &axi_qos->qosthres0);
+	writel(0x00002004, &axi_qos->qosthres1);
+	writel(0x00000000, &axi_qos->qosthres2);
+	writel(0x00000001, &axi_qos->qosqon);
+
+	axi_qos = (struct r8a7791_axi_qos *)SYS_AXI_MMUM_BASE;
+	writel(0x00000001, &axi_qos->qosconf);
+	writel(0x00002004, &axi_qos->qosctset0);
+	writel(0x00002096, &axi_qos->qosctset1);
+	writel(0x00002030, &axi_qos->qosctset2);
+	writel(0x00002030, &axi_qos->qosctset3);
+	writel(0x00000001, &axi_qos->qosreqctr);
+	writel(0x00002064, &axi_qos->qosthres0);
+	writel(0x00002004, &axi_qos->qosthres1);
+	writel(0x00000000, &axi_qos->qosthres2);
+	writel(0x00000001, &axi_qos->qosqon);
+
+	axi_qos = (struct r8a7791_axi_qos *)SYS_AXI_MMUR_BASE;
+	writel(0x00000001, &axi_qos->qosconf);
+	writel(0x00002004, &axi_qos->qosctset0);
+	writel(0x00002096, &axi_qos->qosctset1);
+	writel(0x00002030, &axi_qos->qosctset2);
+	writel(0x00002030, &axi_qos->qosctset3);
+	writel(0x00000001, &axi_qos->qosreqctr);
+	writel(0x00002064, &axi_qos->qosthres0);
+	writel(0x00002004, &axi_qos->qosthres1);
+	writel(0x00000000, &axi_qos->qosthres2);
+	writel(0x00000001, &axi_qos->qosqon);
+
+	axi_qos = (struct r8a7791_axi_qos *)SYS_AXI_MMUS0_BASE;
+	writel(0x00000001, &axi_qos->qosconf);
+	writel(0x00002004, &axi_qos->qosctset0);
+	writel(0x00002096, &axi_qos->qosctset1);
+	writel(0x00002030, &axi_qos->qosctset2);
+	writel(0x00002030, &axi_qos->qosctset3);
+	writel(0x00000001, &axi_qos->qosreqctr);
+	writel(0x00002064, &axi_qos->qosthres0);
+	writel(0x00002004, &axi_qos->qosthres1);
+	writel(0x00000000, &axi_qos->qosthres2);
+	writel(0x00000001, &axi_qos->qosqon);
+
+	axi_qos = (struct r8a7791_axi_qos *)SYS_AXI_MMUS1_BASE;
+	writel(0x00000001, &axi_qos->qosconf);
+	writel(0x00002004, &axi_qos->qosctset0);
+	writel(0x00002096, &axi_qos->qosctset1);
+	writel(0x00002030, &axi_qos->qosctset2);
+	writel(0x00002030, &axi_qos->qosctset3);
+	writel(0x00000001, &axi_qos->qosreqctr);
+	writel(0x00002064, &axi_qos->qosthres0);
+	writel(0x00002004, &axi_qos->qosthres1);
+	writel(0x00000000, &axi_qos->qosthres2);
+	writel(0x00000001, &axi_qos->qosqon);
+
+	axi_qos = (struct r8a7791_axi_qos *)SYS_AXI_MTSB0_BASE;
+	writel(0x00000000, &axi_qos->qosconf);
+	writel(0x00002021, &axi_qos->qosctset0);
+	writel(0x00000001, &axi_qos->qosreqctr);
+	writel(0x00002064, &axi_qos->qosthres0);
+	writel(0x00002004, &axi_qos->qosthres1);
+	writel(0x00000000, &axi_qos->qosthres2);
+	writel(0x00000001, &axi_qos->qosqon);
+
+	axi_qos = (struct r8a7791_axi_qos *)SYS_AXI_MTSB1_BASE;
+	writel(0x00000000, &axi_qos->qosconf);
+	writel(0x00002021, &axi_qos->qosctset0);
+	writel(0x00000001, &axi_qos->qosreqctr);
+	writel(0x00002064, &axi_qos->qosthres0);
+	writel(0x00002004, &axi_qos->qosthres1);
+	writel(0x00000000, &axi_qos->qosthres2);
+	writel(0x00000001, &axi_qos->qosqon);
+
+	axi_qos = (struct r8a7791_axi_qos *)SYS_AXI_PCI_BASE;
+	writel(0x00000000, &axi_qos->qosconf);
+	writel(0x0000214C, &axi_qos->qosctset0);
+	writel(0x00000001, &axi_qos->qosreqctr);
+	writel(0x00002064, &axi_qos->qosthres0);
+	writel(0x00002004, &axi_qos->qosthres1);
+	writel(0x00000000, &axi_qos->qosthres2);
+	writel(0x00000001, &axi_qos->qosqon);
+
+	axi_qos = (struct r8a7791_axi_qos *)SYS_AXI_RTX_BASE;
+	writel(0x00000002, &axi_qos->qosconf);
+	writel(0x00002245, &axi_qos->qosctset0);
+	writel(0x00002096, &axi_qos->qosctset1);
+	writel(0x00002030, &axi_qos->qosctset2);
+	writel(0x00002030, &axi_qos->qosctset3);
+	writel(0x00000001, &axi_qos->qosreqctr);
+	writel(0x00002064, &axi_qos->qosthres0);
+	writel(0x00002004, &axi_qos->qosthres1);
+	writel(0x00000000, &axi_qos->qosthres2);
+	writel(0x00000001, &axi_qos->qosqon);
+
+	axi_qos = (struct r8a7791_axi_qos *)SYS_AXI_SDS0_BASE;
+	writel(0x00000000, &axi_qos->qosconf);
+	writel(0x000020A6, &axi_qos->qosctset0);
+	writel(0x00000001, &axi_qos->qosreqctr);
+	writel(0x00002064, &axi_qos->qosthres0);
+	writel(0x00002004, &axi_qos->qosthres1);
+	writel(0x00000000, &axi_qos->qosthres2);
+	writel(0x00000001, &axi_qos->qosqon);
+
+	axi_qos = (struct r8a7791_axi_qos *)SYS_AXI_SDS1_BASE;
+	writel(0x00000000, &axi_qos->qosconf);
+	writel(0x000020A6, &axi_qos->qosctset0);
+	writel(0x00000001, &axi_qos->qosreqctr);
+	writel(0x00002064, &axi_qos->qosthres0);
+	writel(0x00002004, &axi_qos->qosthres1);
+	writel(0x00000000, &axi_qos->qosthres2);
+	writel(0x00000001, &axi_qos->qosqon);
+
+	axi_qos = (struct r8a7791_axi_qos *)SYS_AXI_USB20_BASE;
+	writel(0x00000000, &axi_qos->qosconf);
+	writel(0x00002053, &axi_qos->qosctset0);
+	writel(0x00000001, &axi_qos->qosreqctr);
+	writel(0x00002064, &axi_qos->qosthres0);
+	writel(0x00002004, &axi_qos->qosthres1);
+	writel(0x00000000, &axi_qos->qosthres2);
+	writel(0x00000001, &axi_qos->qosqon);
+
+	axi_qos = (struct r8a7791_axi_qos *)SYS_AXI_USB21_BASE;
+	writel(0x00000000, &axi_qos->qosconf);
+	writel(0x00002053, &axi_qos->qosctset0);
+	writel(0x00000001, &axi_qos->qosreqctr);
+	writel(0x00002064, &axi_qos->qosthres0);
+	writel(0x00002004, &axi_qos->qosthres1);
+	writel(0x00000000, &axi_qos->qosthres2);
+	writel(0x00000001, &axi_qos->qosqon);
+
+	axi_qos = (struct r8a7791_axi_qos *)SYS_AXI_USB22_BASE;
+	writel(0x00000000, &axi_qos->qosconf);
+	writel(0x00002053, &axi_qos->qosctset0);
+	writel(0x00000001, &axi_qos->qosreqctr);
+	writel(0x00002064, &axi_qos->qosthres0);
+	writel(0x00002004, &axi_qos->qosthres1);
+	writel(0x00000000, &axi_qos->qosthres2);
+	writel(0x00000001, &axi_qos->qosqon);
+
+	axi_qos = (struct r8a7791_axi_qos *)SYS_AXI_USB30_BASE;
+	writel(0x00000000, &axi_qos->qosconf);
+	writel(0x0000214C, &axi_qos->qosctset0);
+	writel(0x00000001, &axi_qos->qosreqctr);
+	writel(0x00002064, &axi_qos->qosthres0);
+	writel(0x00002004, &axi_qos->qosthres1);
+	writel(0x00000000, &axi_qos->qosthres2);
+	writel(0x00000001, &axi_qos->qosqon);
+
+	axi_qos = (struct r8a7791_axi_qos *)SYS_AXI_AX2M_BASE;
+	writel(0x00000002, &axi_qos->qosconf);
+	writel(0x00002245, &axi_qos->qosctset0);
+	writel(0x00000001, &axi_qos->qosreqctr);
+	writel(0x00002064, &axi_qos->qosthres0);
+	writel(0x00002004, &axi_qos->qosthres1);
+	writel(0x00000000, &axi_qos->qosthres2);
+	writel(0x00000001, &axi_qos->qosqon);
+
+	axi_qos = (struct r8a7791_axi_qos *)SYS_AXI_CC50_BASE;
+	writel(0x00000000, &axi_qos->qosconf);
+	writel(0x00002029, &axi_qos->qosctset0);
+	writel(0x00000001, &axi_qos->qosreqctr);
+	writel(0x00002064, &axi_qos->qosthres0);
+	writel(0x00002004, &axi_qos->qosthres1);
+	writel(0x00000000, &axi_qos->qosthres2);
+	writel(0x00000001, &axi_qos->qosqon);
+
+	axi_qos = (struct r8a7791_axi_qos *)SYS_AXI_CCI_BASE;
+	writel(0x00000002, &axi_qos->qosconf);
+	writel(0x00002245, &axi_qos->qosctset0);
+	writel(0x00000001, &axi_qos->qosreqctr);
+	writel(0x00002064, &axi_qos->qosthres0);
+	writel(0x00002004, &axi_qos->qosthres1);
+	writel(0x00000000, &axi_qos->qosthres2);
+	writel(0x00000001, &axi_qos->qosqon);
+
+	axi_qos = (struct r8a7791_axi_qos *)SYS_AXI_CS_BASE;
+	writel(0x00000000, &axi_qos->qosconf);
+	writel(0x00002053, &axi_qos->qosctset0);
+	writel(0x00000001, &axi_qos->qosreqctr);
+	writel(0x00002064, &axi_qos->qosthres0);
+	writel(0x00002004, &axi_qos->qosthres1);
+	writel(0x00000000, &axi_qos->qosthres2);
+	writel(0x00000001, &axi_qos->qosqon);
+
+	axi_qos = (struct r8a7791_axi_qos *)SYS_AXI_DDM_BASE;
+	writel(0x00000000, &axi_qos->qosconf);
+	writel(0x000020A6, &axi_qos->qosctset0);
+	writel(0x00000001, &axi_qos->qosreqctr);
+	writel(0x00002064, &axi_qos->qosthres0);
+	writel(0x00002004, &axi_qos->qosthres1);
+	writel(0x00000000, &axi_qos->qosthres2);
+	writel(0x00000001, &axi_qos->qosqon);
+
+	axi_qos = (struct r8a7791_axi_qos *)SYS_AXI_ETH_BASE;
+	writel(0x00000000, &axi_qos->qosconf);
+	writel(0x00002053, &axi_qos->qosctset0);
+	writel(0x00000001, &axi_qos->qosreqctr);
+	writel(0x00002064, &axi_qos->qosthres0);
+	writel(0x00002004, &axi_qos->qosthres1);
+	writel(0x00000000, &axi_qos->qosthres2);
+	writel(0x00000001, &axi_qos->qosqon);
+
+	axi_qos = (struct r8a7791_axi_qos *)SYS_AXI_MPXM_BASE;
+	writel(0x00000002, &axi_qos->qosconf);
+	writel(0x00002245, &axi_qos->qosctset0);
+	writel(0x00000001, &axi_qos->qosreqctr);
+	writel(0x00002064, &axi_qos->qosthres0);
+	writel(0x00002004, &axi_qos->qosthres1);
+	writel(0x00000000, &axi_qos->qosthres2);
+	writel(0x00000001, &axi_qos->qosqon);
+
+	axi_qos = (struct r8a7791_axi_qos *)SYS_AXI_SAT0_BASE;
+	writel(0x00000000, &axi_qos->qosconf);
+	writel(0x00002053, &axi_qos->qosctset0);
+	writel(0x00000001, &axi_qos->qosreqctr);
+	writel(0x00002064, &axi_qos->qosthres0);
+	writel(0x00002004, &axi_qos->qosthres1);
+	writel(0x00000000, &axi_qos->qosthres2);
+	writel(0x00000001, &axi_qos->qosqon);
+
+	axi_qos = (struct r8a7791_axi_qos *)SYS_AXI_SAT1_BASE;
+	writel(0x00000000, &axi_qos->qosconf);
+	writel(0x00002053, &axi_qos->qosctset0);
+	writel(0x00000001, &axi_qos->qosreqctr);
+	writel(0x00002064, &axi_qos->qosthres0);
+	writel(0x00002004, &axi_qos->qosthres1);
+	writel(0x00000000, &axi_qos->qosthres2);
+	writel(0x00000001, &axi_qos->qosqon);
+
+	axi_qos = (struct r8a7791_axi_qos *)SYS_AXI_SDM0_BASE;
+	writel(0x00000000, &axi_qos->qosconf);
+	writel(0x0000214C, &axi_qos->qosctset0);
+	writel(0x00000001, &axi_qos->qosreqctr);
+	writel(0x00002064, &axi_qos->qosthres0);
+	writel(0x00002004, &axi_qos->qosthres1);
+	writel(0x00000000, &axi_qos->qosthres2);
+	writel(0x00000001, &axi_qos->qosqon);
+
+	axi_qos = (struct r8a7791_axi_qos *)SYS_AXI_SDM1_BASE;
+	writel(0x00000000, &axi_qos->qosconf);
+	writel(0x0000214C, &axi_qos->qosctset0);
+	writel(0x00000001, &axi_qos->qosreqctr);
+	writel(0x00002064, &axi_qos->qosthres0);
+	writel(0x00002004, &axi_qos->qosthres1);
+	writel(0x00000000, &axi_qos->qosthres2);
+	writel(0x00000001, &axi_qos->qosqon);
+
+	axi_qos = (struct r8a7791_axi_qos *)SYS_AXI_TRAB_BASE;
+	writel(0x00000000, &axi_qos->qosconf);
+	writel(0x000020A6, &axi_qos->qosctset0);
+	writel(0x00000001, &axi_qos->qosreqctr);
+	writel(0x00002064, &axi_qos->qosthres0);
+	writel(0x00002004, &axi_qos->qosthres1);
+	writel(0x00000000, &axi_qos->qosthres2);
+	writel(0x00000001, &axi_qos->qosqon);
+
+	axi_qos = (struct r8a7791_axi_qos *)SYS_AXI_UDM0_BASE;
+	writel(0x00000000, &axi_qos->qosconf);
+	writel(0x00002053, &axi_qos->qosctset0);
+	writel(0x00000001, &axi_qos->qosreqctr);
+	writel(0x00002064, &axi_qos->qosthres0);
+	writel(0x00002004, &axi_qos->qosthres1);
+	writel(0x00000000, &axi_qos->qosthres2);
+	writel(0x00000001, &axi_qos->qosqon);
+
+	axi_qos = (struct r8a7791_axi_qos *)SYS_AXI_UDM1_BASE;
+	writel(0x00000000, &axi_qos->qosconf);
+	writel(0x00002053, &axi_qos->qosctset0);
+	writel(0x00000001, &axi_qos->qosreqctr);
+	writel(0x00002064, &axi_qos->qosthres0);
+	writel(0x00002004, &axi_qos->qosthres1);
+	writel(0x00000000, &axi_qos->qosthres2);
+	writel(0x00000001, &axi_qos->qosqon);
+
+	/* QoS Register (RT-AXI) */
+	axi_qos = (struct r8a7791_axi_qos *)RT_AXI_SHX_BASE;
+	writel(0x00000000, &axi_qos->qosconf);
+	writel(0x00002053, &axi_qos->qosctset0);
+	writel(0x00002096, &axi_qos->qosctset1);
+	writel(0x00002030, &axi_qos->qosctset2);
+	writel(0x00002030, &axi_qos->qosctset3);
+	writel(0x00000001, &axi_qos->qosreqctr);
+	writel(0x00002064, &axi_qos->qosthres0);
+	writel(0x00002004, &axi_qos->qosthres1);
+	writel(0x00000000, &axi_qos->qosthres2);
+	writel(0x00000001, &axi_qos->qosqon);
+
+	axi_qos = (struct r8a7791_axi_qos *)RT_AXI_DBG_BASE;
+	writel(0x00000000, &axi_qos->qosconf);
+	writel(0x00002053, &axi_qos->qosctset0);
+	writel(0x00002096, &axi_qos->qosctset1);
+	writel(0x00002030, &axi_qos->qosctset2);
+	writel(0x00002030, &axi_qos->qosctset3);
+	writel(0x00000001, &axi_qos->qosreqctr);
+	writel(0x00002064, &axi_qos->qosthres0);
+	writel(0x00002004, &axi_qos->qosthres1);
+	writel(0x00000000, &axi_qos->qosthres2);
+	writel(0x00000001, &axi_qos->qosqon);
+
+	axi_qos = (struct r8a7791_axi_qos *)RT_AXI_RDM_BASE;
+	writel(0x00000000, &axi_qos->qosconf);
+	writel(0x00002299, &axi_qos->qosctset0);
+	writel(0x00000001, &axi_qos->qosreqctr);
+	writel(0x00002064, &axi_qos->qosthres0);
+	writel(0x00002004, &axi_qos->qosthres1);
+	writel(0x00000000, &axi_qos->qosthres2);
+	writel(0x00000001, &axi_qos->qosqon);
+
+	axi_qos = (struct r8a7791_axi_qos *)RT_AXI_RDS_BASE;
+	writel(0x00000000, &axi_qos->qosconf);
+	writel(0x00002029, &axi_qos->qosctset0);
+	writel(0x00000001, &axi_qos->qosreqctr);
+	writel(0x00002064, &axi_qos->qosthres0);
+	writel(0x00002004, &axi_qos->qosthres1);
+	writel(0x00000000, &axi_qos->qosthres2);
+	writel(0x00000001, &axi_qos->qosqon);
+
+	axi_qos = (struct r8a7791_axi_qos *)RT_AXI_RTX64TO128_BASE;
+	writel(0x00000002, &axi_qos->qosconf);
+	writel(0x00002245, &axi_qos->qosctset0);
+	writel(0x00002096, &axi_qos->qosctset1);
+	writel(0x00002030, &axi_qos->qosctset2);
+	writel(0x00002030, &axi_qos->qosctset3);
+	writel(0x00000001, &axi_qos->qosreqctr);
+	writel(0x00002064, &axi_qos->qosthres0);
+	writel(0x00002004, &axi_qos->qosthres1);
+	writel(0x00000000, &axi_qos->qosthres2);
+	writel(0x00000001, &axi_qos->qosqon);
+
+	axi_qos = (struct r8a7791_axi_qos *)RT_AXI_STPRO_BASE;
+	writel(0x00000000, &axi_qos->qosconf);
+	writel(0x00002029, &axi_qos->qosctset0);
+	writel(0x00002096, &axi_qos->qosctset1);
+	writel(0x00002030, &axi_qos->qosctset2);
+	writel(0x00002030, &axi_qos->qosctset3);
+	writel(0x00000001, &axi_qos->qosreqctr);
+	writel(0x00002064, &axi_qos->qosthres0);
+	writel(0x00002004, &axi_qos->qosthres1);
+	writel(0x00000000, &axi_qos->qosthres2);
+	writel(0x00000001, &axi_qos->qosqon);
+
+	axi_qos = (struct r8a7791_axi_qos *)RT_AXI_SY2RT_BASE;
+	writel(0x00000002, &axi_qos->qosconf);
+	writel(0x00002245, &axi_qos->qosctset0);
+	writel(0x00002096, &axi_qos->qosctset1);
+	writel(0x00002030, &axi_qos->qosctset2);
+	writel(0x00002030, &axi_qos->qosctset3);
+	writel(0x00000001, &axi_qos->qosreqctr);
+	writel(0x00002064, &axi_qos->qosthres0);
+	writel(0x00002004, &axi_qos->qosthres1);
+	writel(0x00000000, &axi_qos->qosthres2);
+	writel(0x00000001, &axi_qos->qosqon);
+
+	/* QoS Register (MP-AXI) */
+	axi_qos = (struct r8a7791_axi_qos *)MP_AXI_ADSP_BASE;
+	writel(0x00000000, &axi_qos->qosconf);
+	writel(0x00002037, &axi_qos->qosctset0);
+	writel(0x00000001, &axi_qos->qosreqctr);
+	writel(0x00002064, &axi_qos->qosthres0);
+	writel(0x00002004, &axi_qos->qosthres1);
+	writel(0x00000000, &axi_qos->qosthres2);
+	writel(0x00000001, &axi_qos->qosqon);
+
+	axi_qos = (struct r8a7791_axi_qos *)MP_AXI_ASDS0_BASE;
+	writel(0x00000001, &axi_qos->qosconf);
+	writel(0x00002014, &axi_qos->qosctset0);
+	writel(0x00000001, &axi_qos->qosreqctr);
+	writel(0x00002064, &axi_qos->qosthres0);
+	writel(0x00002004, &axi_qos->qosthres1);
+	writel(0x00000000, &axi_qos->qosthres2);
+	writel(0x00000001, &axi_qos->qosqon);
+
+	axi_qos = (struct r8a7791_axi_qos *)MP_AXI_ASDS1_BASE;
+	writel(0x00000001, &axi_qos->qosconf);
+	writel(0x00002014, &axi_qos->qosctset0);
+	writel(0x00000001, &axi_qos->qosreqctr);
+	writel(0x00002064, &axi_qos->qosthres0);
+	writel(0x00002004, &axi_qos->qosthres1);
+	writel(0x00000000, &axi_qos->qosthres2);
+	writel(0x00000001, &axi_qos->qosqon);
+
+	axi_qos = (struct r8a7791_axi_qos *)MP_AXI_MLP_BASE;
+	writel(0x00000000, &axi_qos->qosconf);
+	writel(0x00002014, &axi_qos->qosctset0);
+	writel(0x00000001, &axi_qos->qosreqctr);
+	writel(0x00002064, &axi_qos->qosthres0);
+	writel(0x00002004, &axi_qos->qosthres1);
+	writel(0x00000000, &axi_qos->qosthres2);
+	writel(0x00000001, &axi_qos->qosqon);
+
+	axi_qos = (struct r8a7791_axi_qos *)MP_AXI_MMUMP_BASE;
+	writel(0x00000001, &axi_qos->qosconf);
+	writel(0x00002004, &axi_qos->qosctset0);
+	writel(0x00002096, &axi_qos->qosctset1);
+	writel(0x00002030, &axi_qos->qosctset2);
+	writel(0x00002030, &axi_qos->qosctset3);
+	writel(0x00000001, &axi_qos->qosreqctr);
+	writel(0x00002064, &axi_qos->qosthres0);
+	writel(0x00002004, &axi_qos->qosthres1);
+	writel(0x00000000, &axi_qos->qosthres2);
+	writel(0x00000001, &axi_qos->qosqon);
+
+	axi_qos = (struct r8a7791_axi_qos *)MP_AXI_SPU_BASE;
+	writel(0x00000000, &axi_qos->qosconf);
+	writel(0x00002053, &axi_qos->qosctset0);
+	writel(0x00000001, &axi_qos->qosreqctr);
+	writel(0x00002064, &axi_qos->qosthres0);
+	writel(0x00002004, &axi_qos->qosthres1);
+	writel(0x00000000, &axi_qos->qosthres2);
+	writel(0x00000001, &axi_qos->qosqon);
+
+	axi_qos = (struct r8a7791_axi_qos *)MP_AXI_SPUC_BASE;
+	writel(0x00000000, &axi_qos->qosconf);
+	writel(0x0000206E, &axi_qos->qosctset0);
+	writel(0x00000001, &axi_qos->qosreqctr);
+	writel(0x00002064, &axi_qos->qosthres0);
+	writel(0x00002004, &axi_qos->qosthres1);
+	writel(0x00000000, &axi_qos->qosthres2);
+	writel(0x00000001, &axi_qos->qosqon);
+
+	/* QoS Register (SYS-AXI256) */
+	axi_qos = (struct r8a7791_axi_qos *)SYS_AXI256_AXI128TO256_BASE;
+	writel(0x00000002, &axi_qos->qosconf);
+	writel(0x00002245, &axi_qos->qosctset0);
+	writel(0x00002096, &axi_qos->qosctset1);
+	writel(0x00002030, &axi_qos->qosctset2);
+	writel(0x00002030, &axi_qos->qosctset3);
+	writel(0x00000001, &axi_qos->qosreqctr);
+	writel(0x00002064, &axi_qos->qosthres0);
+	writel(0x00002004, &axi_qos->qosthres1);
+	writel(0x00000000, &axi_qos->qosthres2);
+	writel(0x00000001, &axi_qos->qosqon);
+
+	axi_qos = (struct r8a7791_axi_qos *)SYS_AXI256_SYX_BASE;
+	writel(0x00000002, &axi_qos->qosconf);
+	writel(0x00002245, &axi_qos->qosctset0);
+	writel(0x00002096, &axi_qos->qosctset1);
+	writel(0x00002030, &axi_qos->qosctset2);
+	writel(0x00002030, &axi_qos->qosctset3);
+	writel(0x00000001, &axi_qos->qosreqctr);
+	writel(0x00002064, &axi_qos->qosthres0);
+	writel(0x00002004, &axi_qos->qosthres1);
+	writel(0x00000000, &axi_qos->qosthres2);
+	writel(0x00000001, &axi_qos->qosqon);
+
+	axi_qos = (struct r8a7791_axi_qos *)SYS_AXI256_MPX_BASE;
+	writel(0x00000002, &axi_qos->qosconf);
+	writel(0x00002245, &axi_qos->qosctset0);
+	writel(0x00002096, &axi_qos->qosctset1);
+	writel(0x00002030, &axi_qos->qosctset2);
+	writel(0x00002030, &axi_qos->qosctset3);
+	writel(0x00000001, &axi_qos->qosreqctr);
+	writel(0x00002064, &axi_qos->qosthres0);
+	writel(0x00002004, &axi_qos->qosthres1);
+	writel(0x00000000, &axi_qos->qosthres2);
+	writel(0x00000001, &axi_qos->qosqon);
+
+	axi_qos = (struct r8a7791_axi_qos *)SYS_AXI256_MXI_BASE;
+	writel(0x00000002, &axi_qos->qosconf);
+	writel(0x00002245, &axi_qos->qosctset0);
+	writel(0x00002096, &axi_qos->qosctset1);
+	writel(0x00002030, &axi_qos->qosctset2);
+	writel(0x00002030, &axi_qos->qosctset3);
+	writel(0x00000001, &axi_qos->qosreqctr);
+	writel(0x00002064, &axi_qos->qosthres0);
+	writel(0x00002004, &axi_qos->qosthres1);
+	writel(0x00000000, &axi_qos->qosthres2);
+	writel(0x00000001, &axi_qos->qosqon);
+
+	/* QoS Register (CCI-AXI) */
+	axi_qos = (struct r8a7791_axi_qos *)CCI_AXI_MMUS0_BASE;
+	writel(0x00000001, &axi_qos->qosconf);
+	writel(0x00002004, &axi_qos->qosctset0);
+	writel(0x00002096, &axi_qos->qosctset1);
+	writel(0x00002030, &axi_qos->qosctset2);
+	writel(0x00002030, &axi_qos->qosctset3);
+	writel(0x00000001, &axi_qos->qosreqctr);
+	writel(0x00002064, &axi_qos->qosthres0);
+	writel(0x00002004, &axi_qos->qosthres1);
+	writel(0x00000000, &axi_qos->qosthres2);
+	writel(0x00000001, &axi_qos->qosqon);
+
+	axi_qos = (struct r8a7791_axi_qos *)CCI_AXI_SYX2_BASE;
+	writel(0x00000002, &axi_qos->qosconf);
+	writel(0x00002245, &axi_qos->qosctset0);
+	writel(0x00002096, &axi_qos->qosctset1);
+	writel(0x00002030, &axi_qos->qosctset2);
+	writel(0x00002030, &axi_qos->qosctset3);
+	writel(0x00000001, &axi_qos->qosreqctr);
+	writel(0x00002064, &axi_qos->qosthres0);
+	writel(0x00002004, &axi_qos->qosthres1);
+	writel(0x00000000, &axi_qos->qosthres2);
+	writel(0x00000001, &axi_qos->qosqon);
+
+	axi_qos = (struct r8a7791_axi_qos *)CCI_AXI_MMUR_BASE;
+	writel(0x00000001, &axi_qos->qosconf);
+	writel(0x00002004, &axi_qos->qosctset0);
+	writel(0x00002096, &axi_qos->qosctset1);
+	writel(0x00002030, &axi_qos->qosctset2);
+	writel(0x00002030, &axi_qos->qosctset3);
+	writel(0x00000001, &axi_qos->qosreqctr);
+	writel(0x00002064, &axi_qos->qosthres0);
+	writel(0x00002004, &axi_qos->qosthres1);
+	writel(0x00000000, &axi_qos->qosthres2);
+	writel(0x00000001, &axi_qos->qosqon);
+
+	axi_qos = (struct r8a7791_axi_qos *)CCI_AXI_MMUDS_BASE;
+	writel(0x00000001, &axi_qos->qosconf);
+	writel(0x00002004, &axi_qos->qosctset0);
+	writel(0x00002096, &axi_qos->qosctset1);
+	writel(0x00002030, &axi_qos->qosctset2);
+	writel(0x00002030, &axi_qos->qosctset3);
+	writel(0x00000001, &axi_qos->qosreqctr);
+	writel(0x00002064, &axi_qos->qosthres0);
+	writel(0x00002004, &axi_qos->qosthres1);
+	writel(0x00000000, &axi_qos->qosthres2);
+	writel(0x00000001, &axi_qos->qosqon);
+
+	axi_qos = (struct r8a7791_axi_qos *)CCI_AXI_MMUM_BASE;
+	writel(0x00000001, &axi_qos->qosconf);
+	writel(0x00002004, &axi_qos->qosctset0);
+	writel(0x00002096, &axi_qos->qosctset1);
+	writel(0x00002030, &axi_qos->qosctset2);
+	writel(0x00002030, &axi_qos->qosctset3);
+	writel(0x00000001, &axi_qos->qosreqctr);
+	writel(0x00002064, &axi_qos->qosthres0);
+	writel(0x00002004, &axi_qos->qosthres1);
+	writel(0x00000000, &axi_qos->qosthres2);
+	writel(0x00000001, &axi_qos->qosqon);
+
+	axi_qos = (struct r8a7791_axi_qos *)CCI_AXI_MXI_BASE;
+	writel(0x00000002, &axi_qos->qosconf);
+	writel(0x00002245, &axi_qos->qosctset0);
+	writel(0x00002096, &axi_qos->qosctset1);
+	writel(0x00002030, &axi_qos->qosctset2);
+	writel(0x00002030, &axi_qos->qosctset3);
+	writel(0x00000001, &axi_qos->qosreqctr);
+	writel(0x00002064, &axi_qos->qosthres0);
+	writel(0x00002004, &axi_qos->qosthres1);
+	writel(0x00000000, &axi_qos->qosthres2);
+	writel(0x00000001, &axi_qos->qosqon);
+
+	axi_qos = (struct r8a7791_axi_qos *)CCI_AXI_MMUS1_BASE;
+	writel(0x00000001, &axi_qos->qosconf);
+	writel(0x00002004, &axi_qos->qosctset0);
+	writel(0x00002096, &axi_qos->qosctset1);
+	writel(0x00002030, &axi_qos->qosctset2);
+	writel(0x00002030, &axi_qos->qosctset3);
+	writel(0x00000001, &axi_qos->qosreqctr);
+	writel(0x00002064, &axi_qos->qosthres0);
+	writel(0x00002004, &axi_qos->qosthres1);
+	writel(0x00000000, &axi_qos->qosthres2);
+	writel(0x00000001, &axi_qos->qosqon);
+
+	axi_qos = (struct r8a7791_axi_qos *)CCI_AXI_MMUMP_BASE;
+	writel(0x00000001, &axi_qos->qosconf);
+	writel(0x00002004, &axi_qos->qosctset0);
+	writel(0x00002096, &axi_qos->qosctset1);
+	writel(0x00002030, &axi_qos->qosctset2);
+	writel(0x00002030, &axi_qos->qosctset3);
+	writel(0x00000001, &axi_qos->qosreqctr);
+	writel(0x00002064, &axi_qos->qosthres0);
+	writel(0x00002004, &axi_qos->qosthres1);
+	writel(0x00000000, &axi_qos->qosthres2);
+	writel(0x00000001, &axi_qos->qosqon);
+
+	/* QoS Register (Media-AXI) */
+	axi_qos = (struct r8a7791_axi_qos *)MEDIA_AXI_MXR_BASE;
+	writel(0x00000002, &axi_qos->qosconf);
+	writel(0x000020DC, &axi_qos->qosctset0);
+	writel(0x00002096, &axi_qos->qosctset1);
+	writel(0x00002030, &axi_qos->qosctset2);
+	writel(0x00002030, &axi_qos->qosctset3);
+	writel(0x00000020, &axi_qos->qosreqctr);
+	writel(0x000020AA, &axi_qos->qosthres0);
+	writel(0x00002032, &axi_qos->qosthres1);
+	writel(0x00000001, &axi_qos->qosthres2);
+
+	axi_qos = (struct r8a7791_axi_qos *)MEDIA_AXI_MXW_BASE;
+	writel(0x00000002, &axi_qos->qosconf);
+	writel(0x000020DC, &axi_qos->qosctset0);
+	writel(0x00002096, &axi_qos->qosctset1);
+	writel(0x00002030, &axi_qos->qosctset2);
+	writel(0x00002030, &axi_qos->qosctset3);
+	writel(0x00000020, &axi_qos->qosreqctr);
+	writel(0x000020AA, &axi_qos->qosthres0);
+	writel(0x00002032, &axi_qos->qosthres1);
+	writel(0x00000001, &axi_qos->qosthres2);
+
+	axi_qos = (struct r8a7791_axi_qos *)MEDIA_AXI_JPR_BASE;
+	writel(0x00000001, &axi_qos->qosconf);
+	writel(0x00002190, &axi_qos->qosctset0);
+	writel(0x00000020, &axi_qos->qosreqctr);
+	writel(0x00002064, &axi_qos->qosthres0);
+	writel(0x00002004, &axi_qos->qosthres1);
+	writel(0x00000001, &axi_qos->qosthres2);
+	writel(0x00000001, &axi_qos->qosqon);
+
+	axi_qos = (struct r8a7791_axi_qos *)MEDIA_AXI_JPW_BASE;
+	writel(0x00000001, &axi_qos->qosconf);
+	writel(0x00002190, &axi_qos->qosctset0);
+	writel(0x00000020, &axi_qos->qosreqctr);
+	writel(0x00002064, &axi_qos->qosthres0);
+	writel(0x00002004, &axi_qos->qosthres1);
+	writel(0x00000001, &axi_qos->qosthres2);
+	writel(0x00000001, &axi_qos->qosqon);
+
+	axi_qos = (struct r8a7791_axi_qos *)MEDIA_AXI_TDMR_BASE;
+	writel(0x00000001, &axi_qos->qosconf);
+	writel(0x00002190, &axi_qos->qosctset0);
+	writel(0x00000020, &axi_qos->qosreqctr);
+	writel(0x00002064, &axi_qos->qosthres0);
+	writel(0x00002004, &axi_qos->qosthres1);
+	writel(0x00000001, &axi_qos->qosthres2);
+	writel(0x00000001, &axi_qos->qosqon);
+
+	axi_qos = (struct r8a7791_axi_qos *)MEDIA_AXI_TDMW_BASE;
+	writel(0x00000001, &axi_qos->qosconf);
+	writel(0x00002190, &axi_qos->qosctset0);
+	writel(0x00000020, &axi_qos->qosreqctr);
+	writel(0x00002064, &axi_qos->qosthres0);
+	writel(0x00002004, &axi_qos->qosthres1);
+	writel(0x00000001, &axi_qos->qosthres2);
+	writel(0x00000001, &axi_qos->qosqon);
+
+	axi_qos = (struct r8a7791_axi_qos *)MEDIA_AXI_VSP1CR_BASE;
+	writel(0x00000001, &axi_qos->qosconf);
+	writel(0x00002190, &axi_qos->qosctset0);
+	writel(0x00000020, &axi_qos->qosreqctr);
+	writel(0x00002064, &axi_qos->qosthres0);
+	writel(0x00002004, &axi_qos->qosthres1);
+	writel(0x00000001, &axi_qos->qosthres2);
+	writel(0x00000001, &axi_qos->qosqon);
+
+	axi_qos = (struct r8a7791_axi_qos *)MEDIA_AXI_VSP1CW_BASE;
+	writel(0x00000001, &axi_qos->qosconf);
+	writel(0x00002190, &axi_qos->qosctset0);
+	writel(0x00000020, &axi_qos->qosreqctr);
+	writel(0x00002064, &axi_qos->qosthres0);
+	writel(0x00002004, &axi_qos->qosthres1);
+	writel(0x00000001, &axi_qos->qosthres2);
+	writel(0x00000001, &axi_qos->qosqon);
+
+	axi_qos = (struct r8a7791_axi_qos *)MEDIA_AXI_VSPDU0CR_BASE;
+	writel(0x00000001, &axi_qos->qosconf);
+	writel(0x00002190, &axi_qos->qosctset0);
+	writel(0x00000020, &axi_qos->qosreqctr);
+	writel(0x00002064, &axi_qos->qosthres0);
+	writel(0x00002004, &axi_qos->qosthres1);
+	writel(0x00000001, &axi_qos->qosthres2);
+	writel(0x00000001, &axi_qos->qosqon);
+
+	axi_qos = (struct r8a7791_axi_qos *)MEDIA_AXI_VSPDU0CW_BASE;
+	writel(0x00000001, &axi_qos->qosconf);
+	writel(0x00002190, &axi_qos->qosctset0);
+	writel(0x00000020, &axi_qos->qosreqctr);
+	writel(0x00002064, &axi_qos->qosthres0);
+	writel(0x00002004, &axi_qos->qosthres1);
+	writel(0x00000001, &axi_qos->qosthres2);
+	writel(0x00000001, &axi_qos->qosqon);
+
+	axi_qos = (struct r8a7791_axi_qos *)MEDIA_AXI_VSPDU1CR_BASE;
+	writel(0x00000001, &axi_qos->qosconf);
+	writel(0x00002190, &axi_qos->qosctset0);
+	writel(0x00000020, &axi_qos->qosreqctr);
+	writel(0x00002064, &axi_qos->qosthres0);
+	writel(0x00002004, &axi_qos->qosthres1);
+	writel(0x00000001, &axi_qos->qosthres2);
+	writel(0x00000001, &axi_qos->qosqon);
+
+	axi_qos = (struct r8a7791_axi_qos *)MEDIA_AXI_VSPDU1CW_BASE;
+	writel(0x00000001, &axi_qos->qosconf);
+	writel(0x00002190, &axi_qos->qosctset0);
+	writel(0x00000020, &axi_qos->qosreqctr);
+	writel(0x00002064, &axi_qos->qosthres0);
+	writel(0x00002004, &axi_qos->qosthres1);
+	writel(0x00000001, &axi_qos->qosthres2);
+	writel(0x00000001, &axi_qos->qosqon);
+
+	axi_qos = (struct r8a7791_axi_qos *)MEDIA_AXI_VIN0W_BASE;
+	writel(0x00000001, &axi_qos->qosconf);
+	writel(0x000020C8, &axi_qos->qosctset0);
+	writel(0x00000020, &axi_qos->qosreqctr);
+	writel(0x00002064, &axi_qos->qosthres0);
+	writel(0x00002004, &axi_qos->qosthres1);
+	writel(0x00000001, &axi_qos->qosthres2);
+	writel(0x00000001, &axi_qos->qosqon);
+
+	axi_qos = (struct r8a7791_axi_qos *)MEDIA_AXI_FDP0R_BASE;
+	writel(0x00000001, &axi_qos->qosconf);
+	writel(0x000020C8, &axi_qos->qosctset0);
+	writel(0x00000020, &axi_qos->qosreqctr);
+	writel(0x00002064, &axi_qos->qosthres0);
+	writel(0x00002004, &axi_qos->qosthres1);
+	writel(0x00000001, &axi_qos->qosthres2);
+	writel(0x00000001, &axi_qos->qosqon);
+
+	axi_qos = (struct r8a7791_axi_qos *)MEDIA_AXI_FDP0W_BASE;
+	writel(0x00000001, &axi_qos->qosconf);
+	writel(0x000020C8, &axi_qos->qosctset0);
+	writel(0x00000020, &axi_qos->qosreqctr);
+	writel(0x00002064, &axi_qos->qosthres0);
+	writel(0x00002004, &axi_qos->qosthres1);
+	writel(0x00000001, &axi_qos->qosthres2);
+	writel(0x00000001, &axi_qos->qosqon);
+
+	axi_qos = (struct r8a7791_axi_qos *)MEDIA_AXI_IMSR_BASE;
+	writel(0x00000001, &axi_qos->qosconf);
+	writel(0x000020C8, &axi_qos->qosctset0);
+	writel(0x00000020, &axi_qos->qosreqctr);
+	writel(0x00002064, &axi_qos->qosthres0);
+	writel(0x00002004, &axi_qos->qosthres1);
+	writel(0x00000001, &axi_qos->qosthres2);
+	writel(0x00000001, &axi_qos->qosqon);
+
+	axi_qos = (struct r8a7791_axi_qos *)MEDIA_AXI_IMSW_BASE;
+	writel(0x00000001, &axi_qos->qosconf);
+	writel(0x000020C8, &axi_qos->qosctset0);
+	writel(0x00000020, &axi_qos->qosreqctr);
+	writel(0x00002064, &axi_qos->qosthres0);
+	writel(0x00002004, &axi_qos->qosthres1);
+	writel(0x00000001, &axi_qos->qosthres2);
+	writel(0x00000001, &axi_qos->qosqon);
+
+	axi_qos = (struct r8a7791_axi_qos *)MEDIA_AXI_VSP1R_BASE;
+	writel(0x00000001, &axi_qos->qosconf);
+	writel(0x000020C8, &axi_qos->qosctset0);
+	writel(0x00000020, &axi_qos->qosreqctr);
+	writel(0x00002064, &axi_qos->qosthres0);
+	writel(0x00002004, &axi_qos->qosthres1);
+	writel(0x00000001, &axi_qos->qosthres2);
+	writel(0x00000001, &axi_qos->qosqon);
+
+	axi_qos = (struct r8a7791_axi_qos *)MEDIA_AXI_VSP1W_BASE;
+	writel(0x00000001, &axi_qos->qosconf);
+	writel(0x000020C8, &axi_qos->qosctset0);
+	writel(0x00000020, &axi_qos->qosreqctr);
+	writel(0x00002064, &axi_qos->qosthres0);
+	writel(0x00002004, &axi_qos->qosthres1);
+	writel(0x00000001, &axi_qos->qosthres2);
+	writel(0x00000001, &axi_qos->qosqon);
+
+	axi_qos = (struct r8a7791_axi_qos *)MEDIA_AXI_FDP1R_BASE;
+	writel(0x00000001, &axi_qos->qosconf);
+	writel(0x000020C8, &axi_qos->qosctset0);
+	writel(0x00000020, &axi_qos->qosreqctr);
+	writel(0x00002064, &axi_qos->qosthres0);
+	writel(0x00002004, &axi_qos->qosthres1);
+	writel(0x00000001, &axi_qos->qosthres2);
+	writel(0x00000001, &axi_qos->qosqon);
+
+	axi_qos = (struct r8a7791_axi_qos *)MEDIA_AXI_FDP1W_BASE;
+	writel(0x00000001, &axi_qos->qosconf);
+	writel(0x000020C8, &axi_qos->qosctset0);
+	writel(0x00000020, &axi_qos->qosreqctr);
+	writel(0x00002064, &axi_qos->qosthres0);
+	writel(0x00002004, &axi_qos->qosthres1);
+	writel(0x00000001, &axi_qos->qosthres2);
+	writel(0x00000001, &axi_qos->qosqon);
+
+	axi_qos = (struct r8a7791_axi_qos *)MEDIA_AXI_IMRR_BASE;
+	writel(0x00000001, &axi_qos->qosconf);
+	writel(0x000020C8, &axi_qos->qosctset0);
+	writel(0x00000020, &axi_qos->qosreqctr);
+	writel(0x00002064, &axi_qos->qosthres0);
+	writel(0x00002004, &axi_qos->qosthres1);
+	writel(0x00000001, &axi_qos->qosthres2);
+	writel(0x00000001, &axi_qos->qosqon);
+
+	axi_qos = (struct r8a7791_axi_qos *)MEDIA_AXI_IMRW_BASE;
+	writel(0x00000001, &axi_qos->qosconf);
+	writel(0x000020C8, &axi_qos->qosctset0);
+	writel(0x00000020, &axi_qos->qosreqctr);
+	writel(0x00002064, &axi_qos->qosthres0);
+	writel(0x00002004, &axi_qos->qosthres1);
+	writel(0x00000001, &axi_qos->qosthres2);
+	writel(0x00000001, &axi_qos->qosqon);
+
+	axi_qos = (struct r8a7791_axi_qos *)MEDIA_AXI_VSPD0R_BASE;
+	writel(0x00000000, &axi_qos->qosconf);
+	writel(0x000020C8, &axi_qos->qosctset0);
+	writel(0x00002064, &axi_qos->qosthres0);
+	writel(0x00002004, &axi_qos->qosthres1);
+	writel(0x00000001, &axi_qos->qosthres2);
+	writel(0x00000001, &axi_qos->qosqon);
+
+	axi_qos = (struct r8a7791_axi_qos *)MEDIA_AXI_VSPD0W_BASE;
+	writel(0x00000000, &axi_qos->qosconf);
+	writel(0x000020C8, &axi_qos->qosctset0);
+	writel(0x00002064, &axi_qos->qosthres0);
+	writel(0x00002004, &axi_qos->qosthres1);
+	writel(0x00000001, &axi_qos->qosthres2);
+	writel(0x00000001, &axi_qos->qosqon);
+
+	axi_qos = (struct r8a7791_axi_qos *)MEDIA_AXI_VSPD1R_BASE;
+	writel(0x00000000, &axi_qos->qosconf);
+	writel(0x000020C8, &axi_qos->qosctset0);
+	writel(0x00002064, &axi_qos->qosthres0);
+	writel(0x00002004, &axi_qos->qosthres1);
+	writel(0x00000001, &axi_qos->qosthres2);
+	writel(0x00000001, &axi_qos->qosqon);
+
+	axi_qos = (struct r8a7791_axi_qos *)MEDIA_AXI_VSPD1W_BASE;
+	writel(0x00000000, &axi_qos->qosconf);
+	writel(0x000020C8, &axi_qos->qosctset0);
+	writel(0x00002064, &axi_qos->qosthres0);
+	writel(0x00002004, &axi_qos->qosthres1);
+	writel(0x00000001, &axi_qos->qosthres2);
+	writel(0x00000001, &axi_qos->qosqon);
+
+	axi_qos = (struct r8a7791_axi_qos *)MEDIA_AXI_DU0R_BASE;
+	writel(0x00000000, &axi_qos->qosconf);
+	writel(0x00002063, &axi_qos->qosctset0);
+	writel(0x00000001, &axi_qos->qosreqctr);
+	writel(0x00002064, &axi_qos->qosthres0);
+	writel(0x00002004, &axi_qos->qosthres1);
+	writel(0x00000001, &axi_qos->qosthres2);
+	writel(0x00000001, &axi_qos->qosqon);
+
+	axi_qos = (struct r8a7791_axi_qos *)MEDIA_AXI_DU0W_BASE;
+	writel(0x00000000, &axi_qos->qosconf);
+	writel(0x00002063, &axi_qos->qosctset0);
+	writel(0x00000001, &axi_qos->qosreqctr);
+	writel(0x00002064, &axi_qos->qosthres0);
+	writel(0x00002004, &axi_qos->qosthres1);
+	writel(0x00000001, &axi_qos->qosthres2);
+	writel(0x00000001, &axi_qos->qosqon);
+
+	axi_qos = (struct r8a7791_axi_qos *)MEDIA_AXI_VCP0CR_BASE;
+	writel(0x00000001, &axi_qos->qosconf);
+	writel(0x00002073, &axi_qos->qosctset0);
+	writel(0x00000020, &axi_qos->qosreqctr);
+	writel(0x00002064, &axi_qos->qosthres0);
+	writel(0x00002004, &axi_qos->qosthres1);
+	writel(0x00000001, &axi_qos->qosthres2);
+	writel(0x00000001, &axi_qos->qosqon);
+
+	axi_qos = (struct r8a7791_axi_qos *)MEDIA_AXI_VCP0CW_BASE;
+	writel(0x00000001, &axi_qos->qosconf);
+	writel(0x00002073, &axi_qos->qosctset0);
+	writel(0x00000020, &axi_qos->qosreqctr);
+	writel(0x00002064, &axi_qos->qosthres0);
+	writel(0x00002004, &axi_qos->qosthres1);
+	writel(0x00000001, &axi_qos->qosthres2);
+	writel(0x00000001, &axi_qos->qosqon);
+
+	axi_qos = (struct r8a7791_axi_qos *)MEDIA_AXI_VCP0VR_BASE;
+	writel(0x00000001, &axi_qos->qosconf);
+	writel(0x00002073, &axi_qos->qosctset0);
+	writel(0x00000020, &axi_qos->qosreqctr);
+	writel(0x00002064, &axi_qos->qosthres0);
+	writel(0x00002004, &axi_qos->qosthres1);
+	writel(0x00000001, &axi_qos->qosthres2);
+	writel(0x00000001, &axi_qos->qosqon);
+
+	axi_qos = (struct r8a7791_axi_qos *)MEDIA_AXI_VCP0VW_BASE;
+	writel(0x00000001, &axi_qos->qosconf);
+	writel(0x00002073, &axi_qos->qosctset0);
+	writel(0x00000020, &axi_qos->qosreqctr);
+	writel(0x00002064, &axi_qos->qosthres0);
+	writel(0x00002004, &axi_qos->qosthres1);
+	writel(0x00000001, &axi_qos->qosthres2);
+	writel(0x00000001, &axi_qos->qosqon);
+
+	axi_qos = (struct r8a7791_axi_qos *)MEDIA_AXI_VPC0R_BASE;
+	writel(0x00000001, &axi_qos->qosconf);
+	writel(0x00002073, &axi_qos->qosctset0);
+	writel(0x00000020, &axi_qos->qosreqctr);
+	writel(0x00002064, &axi_qos->qosthres0);
+	writel(0x00002004, &axi_qos->qosthres1);
+	writel(0x00000001, &axi_qos->qosthres2);
+	writel(0x00000001, &axi_qos->qosqon);
+}
diff --git a/board/renesas/koelsch/qos.h b/board/renesas/koelsch/qos.h
new file mode 100644
index 0000000000..9a6c0461be
--- /dev/null
+++ b/board/renesas/koelsch/qos.h
@@ -0,0 +1,12 @@
+/*
+ * Copyright (C) 2013 Renesas Electronics Corporation
+ *
+ * SPDX-License-Identifier: GPL-2.0
+ */
+
+#ifndef __QOS_H__
+#define __QOS_H__
+
+void qos_init(void);
+
+#endif
diff --git a/board/renesas/lager/Makefile b/board/renesas/lager/Makefile
new file mode 100644
index 0000000000..034c6f8c07
--- /dev/null
+++ b/board/renesas/lager/Makefile
@@ -0,0 +1,9 @@
+#
+# board/renesas/lager/Makefile
+#
+# Copyright (C) 2013 Renesas Electronics Corporation
+#
+# SPDX-License-Identifier: GPL-2.0
+#
+
+obj-y	:= lager.o qos.o
diff --git a/board/renesas/lager/lager.c b/board/renesas/lager/lager.c
new file mode 100644
index 0000000000..5c99fc9b58
--- /dev/null
+++ b/board/renesas/lager/lager.c
@@ -0,0 +1,287 @@
+/*
+ * board/renesas/lager/lager.c
+ *     This file is lager board support.
+ *
+ * Copyright (C) 2013 Renesas Electronics Corporation
+ * Copyright (C) 2013 Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0
+ */
+
+#include <common.h>
+#include <malloc.h>
+#include <netdev.h>
+#include <asm/processor.h>
+#include <asm/mach-types.h>
+#include <asm/io.h>
+#include <asm/errno.h>
+#include <asm/arch/sys_proto.h>
+#include <asm/gpio.h>
+#include <asm/arch/rmobile.h>
+#include "qos.h"
+
+DECLARE_GLOBAL_DATA_PTR;
+
+#define s_init_wait(cnt) \
+	({	\
+		u32 i = 0x10000 * cnt;	\
+		while (i > 0)	\
+			i--;	\
+	})
+
+#define dbpdrgd_check(bsc) \
+	({	\
+		while ((readl(&bsc->dbpdrgd) & 0x1) != 0x1)	\
+			;	\
+	})
+
+#if defined(CONFIG_NORFLASH)
+static void bsc_init(void)
+{
+	struct r8a7790_lbsc *lbsc = (struct r8a7790_lbsc *)LBSC_BASE;
+	struct r8a7790_dbsc3 *dbsc3_0 = (struct r8a7790_dbsc3 *)DBSC3_0_BASE;
+
+	/* LBSC */
+	writel(0x00000020, &lbsc->cs0ctrl);
+	writel(0x00000020, &lbsc->cs1ctrl);
+	writel(0x00002020, &lbsc->ecs0ctrl);
+	writel(0x00002020, &lbsc->ecs1ctrl);
+
+	writel(0x077F077F, &lbsc->cswcr0);
+	writel(0x077F077F, &lbsc->cswcr1);
+	writel(0x077F077F, &lbsc->ecswcr0);
+	writel(0x077F077F, &lbsc->ecswcr1);
+
+	/* DBSC3 */
+	s_init_wait(10);
+
+	writel(0x0000A55A, &dbsc3_0->dbpdlck);
+	writel(0x00000001, &dbsc3_0->dbpdrga);
+	writel(0x80000000, &dbsc3_0->dbpdrgd);
+	writel(0x00000004, &dbsc3_0->dbpdrga);
+	dbpdrgd_check(dbsc3_0);
+
+	writel(0x00000006, &dbsc3_0->dbpdrga);
+	writel(0x0001C000, &dbsc3_0->dbpdrgd);
+
+	writel(0x00000023, &dbsc3_0->dbpdrga);
+	writel(0x00FD2480, &dbsc3_0->dbpdrgd);
+
+	writel(0x00000010, &dbsc3_0->dbpdrga);
+	writel(0xF004649B, &dbsc3_0->dbpdrgd);
+
+	writel(0x0000000F, &dbsc3_0->dbpdrga);
+	writel(0x00181EE4, &dbsc3_0->dbpdrgd);
+
+	writel(0x0000000E, &dbsc3_0->dbpdrga);
+	writel(0x33C03812, &dbsc3_0->dbpdrgd);
+
+	writel(0x00000003, &dbsc3_0->dbpdrga);
+	writel(0x0300C481, &dbsc3_0->dbpdrgd);
+
+	writel(0x00000007, &dbsc3_0->dbkind);
+	writel(0x10030A02, &dbsc3_0->dbconf0);
+	writel(0x00000001, &dbsc3_0->dbphytype);
+	writel(0x00000000, &dbsc3_0->dbbl);
+	writel(0x0000000B, &dbsc3_0->dbtr0);
+	writel(0x00000008, &dbsc3_0->dbtr1);
+	writel(0x00000000, &dbsc3_0->dbtr2);
+	writel(0x0000000B, &dbsc3_0->dbtr3);
+	writel(0x000C000B, &dbsc3_0->dbtr4);
+	writel(0x00000027, &dbsc3_0->dbtr5);
+	writel(0x0000001C, &dbsc3_0->dbtr6);
+	writel(0x00000005, &dbsc3_0->dbtr7);
+	writel(0x00000018, &dbsc3_0->dbtr8);
+	writel(0x00000008, &dbsc3_0->dbtr9);
+	writel(0x0000000C, &dbsc3_0->dbtr10);
+	writel(0x00000009, &dbsc3_0->dbtr11);
+	writel(0x00000012, &dbsc3_0->dbtr12);
+	writel(0x000000D0, &dbsc3_0->dbtr13);
+	writel(0x00140005, &dbsc3_0->dbtr14);
+	writel(0x00050004, &dbsc3_0->dbtr15);
+	writel(0x70233005, &dbsc3_0->dbtr16);
+	writel(0x000C0000, &dbsc3_0->dbtr17);
+	writel(0x00000300, &dbsc3_0->dbtr18);
+	writel(0x00000040, &dbsc3_0->dbtr19);
+	writel(0x00000001, &dbsc3_0->dbrnk0);
+	writel(0x00020001, &dbsc3_0->dbadj0);
+	writel(0x20082008, &dbsc3_0->dbadj2);
+	writel(0x00020002, &dbsc3_0->dbwt0cnf0);
+	writel(0x0000000F, &dbsc3_0->dbwt0cnf4);
+
+	writel(0x00000015, &dbsc3_0->dbpdrga);
+	writel(0x00000D70, &dbsc3_0->dbpdrgd);
+
+	writel(0x00000016, &dbsc3_0->dbpdrga);
+	writel(0x00000006, &dbsc3_0->dbpdrgd);
+
+	writel(0x00000017, &dbsc3_0->dbpdrga);
+	writel(0x00000018, &dbsc3_0->dbpdrgd);
+
+	writel(0x00000012, &dbsc3_0->dbpdrga);
+	writel(0x9D5CBB66, &dbsc3_0->dbpdrgd);
+
+	writel(0x00000013, &dbsc3_0->dbpdrga);
+	writel(0x1A868300, &dbsc3_0->dbpdrgd);
+
+	writel(0x00000023, &dbsc3_0->dbpdrga);
+	writel(0x00FDB6C0, &dbsc3_0->dbpdrgd);
+
+	writel(0x00000014, &dbsc3_0->dbpdrga);
+	writel(0x300214D8, &dbsc3_0->dbpdrgd);
+
+	writel(0x0000001A, &dbsc3_0->dbpdrga);
+	writel(0x930035C7, &dbsc3_0->dbpdrgd);
+
+	writel(0x00000060, &dbsc3_0->dbpdrga);
+	writel(0x330657B2, &dbsc3_0->dbpdrgd);
+
+	writel(0x00000011, &dbsc3_0->dbpdrga);
+	writel(0x1000040B, &dbsc3_0->dbpdrgd);
+
+	writel(0x0000FA00, &dbsc3_0->dbcmd);
+	writel(0x00000001, &dbsc3_0->dbpdrga);
+	writel(0x00000071, &dbsc3_0->dbpdrgd);
+
+	writel(0x00000004, &dbsc3_0->dbpdrga);
+	dbpdrgd_check(dbsc3_0);
+
+	writel(0x0000FA00, &dbsc3_0->dbcmd);
+	writel(0x2100FA00, &dbsc3_0->dbcmd);
+	writel(0x0000FA00, &dbsc3_0->dbcmd);
+	writel(0x0000FA00, &dbsc3_0->dbcmd);
+	writel(0x0000FA00, &dbsc3_0->dbcmd);
+	writel(0x0000FA00, &dbsc3_0->dbcmd);
+	writel(0x0000FA00, &dbsc3_0->dbcmd);
+	writel(0x0000FA00, &dbsc3_0->dbcmd);
+	writel(0x0000FA00, &dbsc3_0->dbcmd);
+
+	writel(0x110000DB, &dbsc3_0->dbcmd);
+
+	writel(0x00000001, &dbsc3_0->dbpdrga);
+	writel(0x00000181, &dbsc3_0->dbpdrgd);
+
+	writel(0x00000004, &dbsc3_0->dbpdrga);
+	dbpdrgd_check(dbsc3_0);
+
+	writel(0x00000001, &dbsc3_0->dbpdrga);
+	writel(0x0000FE01, &dbsc3_0->dbpdrgd);
+
+	writel(0x00000004, &dbsc3_0->dbpdrga);
+	dbpdrgd_check(dbsc3_0);
+
+	writel(0x00000000, &dbsc3_0->dbbs0cnt1);
+	writel(0x01004C20, &dbsc3_0->dbcalcnf);
+	writel(0x014000AA, &dbsc3_0->dbcaltr);
+	writel(0x00000140, &dbsc3_0->dbrfcnf0);
+	writel(0x00081860, &dbsc3_0->dbrfcnf1);
+	writel(0x00010000, &dbsc3_0->dbrfcnf2);
+	writel(0x00000001, &dbsc3_0->dbrfen);
+	writel(0x00000001, &dbsc3_0->dbacen);
+}
+#else
+#define bsc_init() do {} while (0)
+#endif /* CONFIG_NORFLASH */
+
+void s_init(void)
+{
+	struct r8a7790_rwdt *rwdt = (struct r8a7790_rwdt *)RWDT_BASE;
+	struct r8a7790_swdt *swdt = (struct r8a7790_swdt *)SWDT_BASE;
+
+	/* Watchdog init */
+	writel(0xA5A5A500, &rwdt->rwtcsra);
+	writel(0xA5A5A500, &swdt->swtcsra);
+
+	/* QoS(Quality-of-Service) Init */
+	qos_init();
+
+	/* BSC init */
+	bsc_init();
+}
+
+#define MSTPSR1	0xE6150038
+#define SMSTPCR1	0xE6150134
+#define TMU0_MSTP125	(1 << 25)
+
+#define MSTPSR7	0xE61501C4
+#define SMSTPCR7	0xE615014C
+#define SCIF0_MSTP721	(1 << 21)
+
+#define PMMR	0xE6060000
+#define GPSR4	0xE6060014
+#define IPSR14	0xE6060058
+
+#define	set_guard_reg(addr, mask, value)	\
+{ \
+	u32	val; \
+	val = (readl(addr) & ~(mask)) | (value);	\
+	writel(~val, PMMR);	\
+	writel(val, addr);	\
+}
+
+#define mstp_setbits(type, addr, saddr, set) \
+	out_##type((saddr), in_##type(addr) | (set))
+#define mstp_clrbits(type, addr, saddr, clear) \
+	out_##type((saddr), in_##type(addr) & ~(clear))
+#define mstp_setbits_le32(addr, saddr, set)	\
+		mstp_setbits(le32, addr, saddr, set)
+#define mstp_clrbits_le32(addr, saddr, clear)	\
+		mstp_clrbits(le32, addr, saddr, clear)
+
+int board_early_init_f(void)
+{
+	/* TMU0 */
+	mstp_clrbits_le32(MSTPSR1, SMSTPCR1, TMU0_MSTP125);
+
+#if defined(CONFIG_NORFLASH)
+	/* SCIF0 */
+	set_guard_reg(GPSR4, 0x34000000, 0x00000000);
+	set_guard_reg(IPSR14, 0x00000FC7, 0x00000481);
+	set_guard_reg(GPSR4,  0x00000000, 0x34000000);
+#endif
+
+	mstp_clrbits_le32(MSTPSR7, SMSTPCR7, SCIF0_MSTP721);
+
+	return 0;
+}
+
+DECLARE_GLOBAL_DATA_PTR;
+int board_init(void)
+{
+	/* board id for linux */
+	gd->bd->bi_arch_number = MACH_TYPE_LAGER;
+	/* adress of boot parameters */
+	gd->bd->bi_boot_params = LAGER_SDRAM_BASE + 0x100;
+
+	/* Init PFC controller */
+	r8a7790_pinmux_init();
+
+	return 0;
+}
+
+int dram_init(void)
+{
+	gd->bd->bi_dram[0].start = CONFIG_SYS_SDRAM_BASE;
+	gd->ram_size = CONFIG_SYS_SDRAM_SIZE;
+
+	return 0;
+}
+
+const struct rmobile_sysinfo sysinfo = {
+	CONFIG_RMOBILE_BOARD_STRING
+};
+
+void dram_init_banksize(void)
+{
+	gd->bd->bi_dram[0].start = LAGER_SDRAM_BASE;
+	gd->bd->bi_dram[0].size = LAGER_SDRAM_SIZE;
+}
+
+int board_late_init(void)
+{
+	return 0;
+}
+
+void reset_cpu(ulong addr)
+{
+}
diff --git a/board/renesas/lager/qos.c b/board/renesas/lager/qos.c
new file mode 100644
index 0000000000..b88511a326
--- /dev/null
+++ b/board/renesas/lager/qos.c
@@ -0,0 +1,1119 @@
+/*
+ * board/renesas/lager/qos.c
+ *
+ * Copyright (C) 2013 Renesas Electronics Corporation
+ *
+ * SPDX-License-Identifier: GPL-2.0
+ */
+
+#include <common.h>
+#include <asm/processor.h>
+#include <asm/mach-types.h>
+#include <asm/io.h>
+#include <asm/arch/rmobile.h>
+
+/* QoS version 0.954 */
+
+enum {
+	DBSC3_R00, DBSC3_R01, DBSC3_R02, DBSC3_R03, DBSC3_R04,
+	DBSC3_R05, DBSC3_R06, DBSC3_R07, DBSC3_R08, DBSC3_R09,
+	DBSC3_R10, DBSC3_R11, DBSC3_R12, DBSC3_R13, DBSC3_R14,
+	DBSC3_R15,
+	DBSC3_W00, DBSC3_W01, DBSC3_W02, DBSC3_W03, DBSC3_W04,
+	DBSC3_W05, DBSC3_W06, DBSC3_W07, DBSC3_W08, DBSC3_W09,
+	DBSC3_W10, DBSC3_W11, DBSC3_W12, DBSC3_W13, DBSC3_W14,
+	DBSC3_W15,
+	DBSC3_NR,
+};
+
+static const u32 dbsc3_qos_addr[DBSC3_NR] = {
+	[DBSC3_R00] = DBSC3_0_QOS_R0_BASE,
+	[DBSC3_R01] = DBSC3_0_QOS_R1_BASE,
+	[DBSC3_R02] = DBSC3_0_QOS_R2_BASE,
+	[DBSC3_R03] = DBSC3_0_QOS_R3_BASE,
+	[DBSC3_R04] = DBSC3_0_QOS_R4_BASE,
+	[DBSC3_R05] = DBSC3_0_QOS_R5_BASE,
+	[DBSC3_R06] = DBSC3_0_QOS_R6_BASE,
+	[DBSC3_R07] = DBSC3_0_QOS_R7_BASE,
+	[DBSC3_R08] = DBSC3_0_QOS_R8_BASE,
+	[DBSC3_R09] = DBSC3_0_QOS_R9_BASE,
+	[DBSC3_R10] = DBSC3_0_QOS_R10_BASE,
+	[DBSC3_R11] = DBSC3_0_QOS_R11_BASE,
+	[DBSC3_R12] = DBSC3_0_QOS_R12_BASE,
+	[DBSC3_R13] = DBSC3_0_QOS_R13_BASE,
+	[DBSC3_R14] = DBSC3_0_QOS_R14_BASE,
+	[DBSC3_R15] = DBSC3_0_QOS_R15_BASE,
+	[DBSC3_W00] = DBSC3_0_QOS_W0_BASE,
+	[DBSC3_W01] = DBSC3_0_QOS_W1_BASE,
+	[DBSC3_W02] = DBSC3_0_QOS_W2_BASE,
+	[DBSC3_W03] = DBSC3_0_QOS_W3_BASE,
+	[DBSC3_W04] = DBSC3_0_QOS_W4_BASE,
+	[DBSC3_W05] = DBSC3_0_QOS_W5_BASE,
+	[DBSC3_W06] = DBSC3_0_QOS_W6_BASE,
+	[DBSC3_W07] = DBSC3_0_QOS_W7_BASE,
+	[DBSC3_W08] = DBSC3_0_QOS_W8_BASE,
+	[DBSC3_W09] = DBSC3_0_QOS_W9_BASE,
+	[DBSC3_W10] = DBSC3_0_QOS_W10_BASE,
+	[DBSC3_W11] = DBSC3_0_QOS_W11_BASE,
+	[DBSC3_W12] = DBSC3_0_QOS_W12_BASE,
+	[DBSC3_W13] = DBSC3_0_QOS_W13_BASE,
+	[DBSC3_W14] = DBSC3_0_QOS_W14_BASE,
+	[DBSC3_W15] = DBSC3_0_QOS_W15_BASE,
+};
+
+void qos_init(void)
+{
+	int i;
+	struct r8a7790_s3c *s3c;
+	struct r8a7790_s3c_qos *s3c_qos;
+	struct r8a7790_dbsc3_qos *qos_addr;
+	struct r8a7790_mxi *mxi;
+	struct r8a7790_mxi_qos *mxi_qos;
+	struct r8a7790_axi_qos *axi_qos;
+
+	/* DBSC DBADJ2 */
+	writel(0x20042004, DBSC3_0_DBADJ2);
+
+	/* S3C -QoS */
+	s3c = (struct r8a7790_s3c *)S3C_BASE;
+	writel(0x80FF1C1E, &s3c->s3cadsplcr);
+	writel(0x1F060505, &s3c->s3crorr);
+	writel(0x1F020100, &s3c->s3cworr);
+
+	/* QoS Control Registers */
+	s3c_qos = (struct r8a7790_s3c_qos *)S3C_QOS_CCI0_BASE;
+	writel(0x00800080, &s3c_qos->s3cqos0);
+	writel(0x22000010, &s3c_qos->s3cqos1);
+	writel(0x22002200, &s3c_qos->s3cqos2);
+	writel(0x2F002200, &s3c_qos->s3cqos3);
+	writel(0x2F002F00, &s3c_qos->s3cqos4);
+	writel(0x22000010, &s3c_qos->s3cqos5);
+	writel(0x22002200, &s3c_qos->s3cqos6);
+	writel(0x2F002200, &s3c_qos->s3cqos7);
+	writel(0x2F002F00, &s3c_qos->s3cqos8);
+
+	s3c_qos = (struct r8a7790_s3c_qos *)S3C_QOS_CCI1_BASE;
+	writel(0x00800080, &s3c_qos->s3cqos0);
+	writel(0x22000010, &s3c_qos->s3cqos1);
+	writel(0x22002200, &s3c_qos->s3cqos2);
+	writel(0x2F002200, &s3c_qos->s3cqos3);
+	writel(0x2F002F00, &s3c_qos->s3cqos4);
+	writel(0x22000010, &s3c_qos->s3cqos5);
+	writel(0x22002200, &s3c_qos->s3cqos6);
+	writel(0x2F002200, &s3c_qos->s3cqos7);
+	writel(0x2F002F00, &s3c_qos->s3cqos8);
+
+	s3c_qos = (struct r8a7790_s3c_qos *)S3C_QOS_MXI_BASE;
+	writel(0x80918099, &s3c_qos->s3cqos0);
+	writel(0x20410010, &s3c_qos->s3cqos1);
+	writel(0x200A2023, &s3c_qos->s3cqos2);
+	writel(0x20502001, &s3c_qos->s3cqos3);
+	writel(0x00002032, &s3c_qos->s3cqos4);
+	writel(0x20410FFF, &s3c_qos->s3cqos5);
+	writel(0x200A2023, &s3c_qos->s3cqos6);
+	writel(0x20502001, &s3c_qos->s3cqos7);
+	writel(0x20142032, &s3c_qos->s3cqos8);
+
+	s3c_qos = (struct r8a7790_s3c_qos *)S3C_QOS_AXI_BASE;
+
+	writel(0x00810089, &s3c_qos->s3cqos0);
+	writel(0x20410001, &s3c_qos->s3cqos1);
+	writel(0x200A2023, &s3c_qos->s3cqos2);
+	writel(0x20502001, &s3c_qos->s3cqos3);
+	writel(0x00002032, &s3c_qos->s3cqos4);
+	writel(0x20410FFF, &s3c_qos->s3cqos5);
+	writel(0x200A2023, &s3c_qos->s3cqos6);
+	writel(0x20502001, &s3c_qos->s3cqos7);
+	writel(0x20142032, &s3c_qos->s3cqos8);
+
+	writel(0x00200808, &s3c->s3carcr11);
+
+	/* DBSC -QoS */
+	/* DBSC0 - Read/Write */
+	for (i = DBSC3_R00; i < DBSC3_NR; i++) {
+		qos_addr = (struct r8a7790_dbsc3_qos *)dbsc3_qos_addr[i];
+		writel(0x00000203, &qos_addr->dblgcnt);
+		writel(0x00002064, &qos_addr->dbtmval0);
+		writel(0x00002048, &qos_addr->dbtmval1);
+		writel(0x00002032, &qos_addr->dbtmval2);
+		writel(0x00002019, &qos_addr->dbtmval3);
+		writel(0x00000001, &qos_addr->dbrqctr);
+		writel(0x00002019, &qos_addr->dbthres0);
+		writel(0x00002019, &qos_addr->dbthres1);
+		writel(0x00002019, &qos_addr->dbthres2);
+		writel(0x00000000, &qos_addr->dblgqon);
+	}
+	/* CCI-400 -QoS */
+	writel(0x20001000, CCI_400_MAXOT_1);
+	writel(0x20001000, CCI_400_MAXOT_2);
+	writel(0x0000000C, CCI_400_QOSCNTL_1);
+	writel(0x0000000C, CCI_400_QOSCNTL_2);
+
+	/* MXI -QoS */
+	/* Transaction Control (MXI) */
+	mxi = (struct r8a7790_mxi *)MXI_BASE;
+	writel(0x00000013, &mxi->mxrtcr);
+	writel(0x00000013, &mxi->mxwtcr);
+	writel(0x00B800C0, &mxi->mxsaar0);
+	writel(0x02000800, &mxi->mxsaar1);
+	writel(0x00200000, &mxi->mxs3cracr);
+	writel(0x00200000, &mxi->mxs3cwacr);
+	writel(0x00200000, &mxi->mxaxiracr);
+	writel(0x00200000, &mxi->mxaxiwacr);
+
+	/* QoS Control (MXI) */
+	mxi_qos = (struct r8a7790_mxi_qos *)MXI_QOS_BASE;
+	writel(0x0000000C, &mxi_qos->vspdu0);
+	writel(0x0000000C, &mxi_qos->vspdu1);
+	writel(0x0000000D, &mxi_qos->du0);
+	writel(0x0000000D, &mxi_qos->du1);
+
+	/* AXI -QoS */
+	/* Transaction Control (MXI) */
+	axi_qos = (struct r8a7790_axi_qos *)SYS_AXI_SYX64TO128_BASE;
+	writel(0x00000002, &axi_qos->qosconf);
+	writel(0x0000200F, &axi_qos->qosctset0);
+	writel(0x00002009, &axi_qos->qosctset1);
+	writel(0x00002003, &axi_qos->qosctset2);
+	writel(0x00002003, &axi_qos->qosctset3);
+	writel(0x00000001, &axi_qos->qosreqctr);
+	writel(0x00002006, &axi_qos->qosthres0);
+	writel(0x00002001, &axi_qos->qosthres1);
+	writel(0x00000000, &axi_qos->qosthres2);
+	writel(0x00000001, &axi_qos->qosqon);
+
+	axi_qos = (struct r8a7790_axi_qos *)SYS_AXI_AVB_BASE;
+	writel(0x00000000, &axi_qos->qosconf);
+	writel(0x0000200A, &axi_qos->qosctset0);
+	writel(0x00000001, &axi_qos->qosreqctr);
+	writel(0x00002006, &axi_qos->qosthres0);
+	writel(0x00002001, &axi_qos->qosthres1);
+	writel(0x00000000, &axi_qos->qosthres2);
+	writel(0x00000001, &axi_qos->qosqon);
+
+	axi_qos = (struct r8a7790_axi_qos *)SYS_AXI_G2D_BASE;
+	writel(0x00000000, &axi_qos->qosconf);
+	writel(0x0000200A, &axi_qos->qosctset0);
+	writel(0x00000001, &axi_qos->qosreqctr);
+	writel(0x00002006, &axi_qos->qosthres0);
+	writel(0x00002001, &axi_qos->qosthres1);
+	writel(0x00000000, &axi_qos->qosthres2);
+	writel(0x00000001, &axi_qos->qosqon);
+
+	axi_qos = (struct r8a7790_axi_qos *)SYS_AXI_IMP0_BASE;
+	writel(0x00000000, &axi_qos->qosconf);
+	writel(0x00002002, &axi_qos->qosctset0);
+	writel(0x00000001, &axi_qos->qosreqctr);
+	writel(0x00002006, &axi_qos->qosthres0);
+	writel(0x00002001, &axi_qos->qosthres1);
+	writel(0x00000000, &axi_qos->qosthres2);
+	writel(0x00000001, &axi_qos->qosqon);
+
+	axi_qos = (struct r8a7790_axi_qos *)SYS_AXI_IMP1_BASE;
+	writel(0x00000000, &axi_qos->qosconf);
+	writel(0x00002004, &axi_qos->qosctset0);
+	writel(0x00000001, &axi_qos->qosreqctr);
+	writel(0x00002006, &axi_qos->qosthres0);
+	writel(0x00002001, &axi_qos->qosthres1);
+	writel(0x00000000, &axi_qos->qosthres2);
+	writel(0x00000001, &axi_qos->qosqon);
+
+	axi_qos = (struct r8a7790_axi_qos *)SYS_AXI_IMUX0_BASE;
+	writel(0x00000002, &axi_qos->qosconf);
+	writel(0x0000200F, &axi_qos->qosctset0);
+	writel(0x00002009, &axi_qos->qosctset1);
+	writel(0x00002003, &axi_qos->qosctset2);
+	writel(0x00002003, &axi_qos->qosctset3);
+	writel(0x00000001, &axi_qos->qosreqctr);
+	writel(0x00002006, &axi_qos->qosthres0);
+	writel(0x00002001, &axi_qos->qosthres1);
+	writel(0x00000000, &axi_qos->qosthres2);
+	writel(0x00000001, &axi_qos->qosqon);
+
+	axi_qos = (struct r8a7790_axi_qos *)SYS_AXI_IMUX1_BASE;
+	writel(0x00000002, &axi_qos->qosconf);
+	writel(0x0000200F, &axi_qos->qosctset0);
+	writel(0x00002009, &axi_qos->qosctset1);
+	writel(0x00002003, &axi_qos->qosctset2);
+	writel(0x00002003, &axi_qos->qosctset3);
+	writel(0x00000001, &axi_qos->qosreqctr);
+	writel(0x00002006, &axi_qos->qosthres0);
+	writel(0x00002001, &axi_qos->qosthres1);
+	writel(0x00000000, &axi_qos->qosthres2);
+	writel(0x00000001, &axi_qos->qosqon);
+
+	axi_qos = (struct r8a7790_axi_qos *)SYS_AXI_IMUX2_BASE;
+	writel(0x00000002, &axi_qos->qosconf);
+	writel(0x0000200F, &axi_qos->qosctset0);
+	writel(0x00002009, &axi_qos->qosctset1);
+	writel(0x00002003, &axi_qos->qosctset2);
+	writel(0x00002003, &axi_qos->qosctset3);
+	writel(0x00000001, &axi_qos->qosreqctr);
+	writel(0x00002006, &axi_qos->qosthres0);
+	writel(0x00002001, &axi_qos->qosthres1);
+	writel(0x00000000, &axi_qos->qosthres2);
+	writel(0x00000001, &axi_qos->qosqon);
+
+	axi_qos = (struct r8a7790_axi_qos *)SYS_AXI_LBS_BASE;
+	writel(0x00000000, &axi_qos->qosconf);
+	writel(0x00002014, &axi_qos->qosctset0);
+	writel(0x00000001, &axi_qos->qosreqctr);
+	writel(0x00002006, &axi_qos->qosthres0);
+	writel(0x00002001, &axi_qos->qosthres1);
+	writel(0x00000000, &axi_qos->qosthres2);
+	writel(0x00000001, &axi_qos->qosqon);
+
+	axi_qos = (struct r8a7790_axi_qos *)SYS_AXI_MMUDS_BASE;
+	writel(0x00000001, &axi_qos->qosconf);
+	writel(0x00002001, &axi_qos->qosctset0);
+	writel(0x00002009, &axi_qos->qosctset1);
+	writel(0x00002003, &axi_qos->qosctset2);
+	writel(0x00002003, &axi_qos->qosctset3);
+	writel(0x00000001, &axi_qos->qosreqctr);
+	writel(0x00002006, &axi_qos->qosthres0);
+	writel(0x00002001, &axi_qos->qosthres1);
+	writel(0x00000000, &axi_qos->qosthres2);
+	writel(0x00000001, &axi_qos->qosqon);
+
+	axi_qos = (struct r8a7790_axi_qos *)SYS_AXI_MMUM_BASE;
+	writel(0x00000001, &axi_qos->qosconf);
+	writel(0x00002001, &axi_qos->qosctset0);
+	writel(0x00002009, &axi_qos->qosctset1);
+	writel(0x00002003, &axi_qos->qosctset2);
+	writel(0x00002003, &axi_qos->qosctset3);
+	writel(0x00000001, &axi_qos->qosreqctr);
+	writel(0x00002006, &axi_qos->qosthres0);
+	writel(0x00002001, &axi_qos->qosthres1);
+	writel(0x00000000, &axi_qos->qosthres2);
+	writel(0x00000001, &axi_qos->qosqon);
+
+	axi_qos = (struct r8a7790_axi_qos *)SYS_AXI_MMUR_BASE;
+	writel(0x00000001, &axi_qos->qosconf);
+	writel(0x00002001, &axi_qos->qosctset0);
+	writel(0x00002009, &axi_qos->qosctset1);
+	writel(0x00002003, &axi_qos->qosctset2);
+	writel(0x00002003, &axi_qos->qosctset3);
+	writel(0x00000001, &axi_qos->qosreqctr);
+	writel(0x00002006, &axi_qos->qosthres0);
+	writel(0x00002001, &axi_qos->qosthres1);
+	writel(0x00000000, &axi_qos->qosthres2);
+	writel(0x00000001, &axi_qos->qosqon);
+
+	axi_qos = (struct r8a7790_axi_qos *)SYS_AXI_MMUS0_BASE;
+	writel(0x00000001, &axi_qos->qosconf);
+	writel(0x00002001, &axi_qos->qosctset0);
+	writel(0x00002009, &axi_qos->qosctset1);
+	writel(0x00002003, &axi_qos->qosctset2);
+	writel(0x00002003, &axi_qos->qosctset3);
+	writel(0x00000001, &axi_qos->qosreqctr);
+	writel(0x00002006, &axi_qos->qosthres0);
+	writel(0x00002001, &axi_qos->qosthres1);
+	writel(0x00000000, &axi_qos->qosthres2);
+	writel(0x00000001, &axi_qos->qosqon);
+
+	axi_qos = (struct r8a7790_axi_qos *)SYS_AXI_MMUS1_BASE;
+	writel(0x00000001, &axi_qos->qosconf);
+	writel(0x00002001, &axi_qos->qosctset0);
+	writel(0x00002009, &axi_qos->qosctset1);
+	writel(0x00002003, &axi_qos->qosctset2);
+	writel(0x00002003, &axi_qos->qosctset3);
+	writel(0x00000001, &axi_qos->qosreqctr);
+	writel(0x00002006, &axi_qos->qosthres0);
+	writel(0x00002001, &axi_qos->qosthres1);
+	writel(0x00000000, &axi_qos->qosthres2);
+	writel(0x00000001, &axi_qos->qosqon);
+
+	axi_qos = (struct r8a7790_axi_qos *)SYS_AXI_MTSB0_BASE;
+	writel(0x00000000, &axi_qos->qosconf);
+	writel(0x00002002, &axi_qos->qosctset0);
+	writel(0x00000001, &axi_qos->qosreqctr);
+	writel(0x00002006, &axi_qos->qosthres0);
+	writel(0x00002001, &axi_qos->qosthres1);
+	writel(0x00000000, &axi_qos->qosthres2);
+	writel(0x00000001, &axi_qos->qosqon);
+
+	axi_qos = (struct r8a7790_axi_qos *)SYS_AXI_MTSB1_BASE;
+	writel(0x00000000, &axi_qos->qosconf);
+	writel(0x00002002, &axi_qos->qosctset0);
+	writel(0x00000001, &axi_qos->qosreqctr);
+	writel(0x00002006, &axi_qos->qosthres0);
+	writel(0x00002001, &axi_qos->qosthres1);
+	writel(0x00000000, &axi_qos->qosthres2);
+	writel(0x00000001, &axi_qos->qosqon);
+
+	axi_qos = (struct r8a7790_axi_qos *)SYS_AXI_PCI_BASE;
+	writel(0x00000000, &axi_qos->qosconf);
+	writel(0x00002014, &axi_qos->qosctset0);
+	writel(0x00000001, &axi_qos->qosreqctr);
+	writel(0x00002006, &axi_qos->qosthres0);
+	writel(0x00002001, &axi_qos->qosthres1);
+	writel(0x00000000, &axi_qos->qosthres2);
+	writel(0x00000001, &axi_qos->qosqon);
+
+	axi_qos = (struct r8a7790_axi_qos *)SYS_AXI_RTX_BASE;
+	writel(0x00000002, &axi_qos->qosconf);
+	writel(0x0000200F, &axi_qos->qosctset0);
+	writel(0x00002009, &axi_qos->qosctset1);
+	writel(0x00002003, &axi_qos->qosctset2);
+	writel(0x00002003, &axi_qos->qosctset3);
+	writel(0x00000001, &axi_qos->qosreqctr);
+	writel(0x00002006, &axi_qos->qosthres0);
+	writel(0x00002001, &axi_qos->qosthres1);
+	writel(0x00000000, &axi_qos->qosthres2);
+	writel(0x00000001, &axi_qos->qosqon);
+
+	axi_qos = (struct r8a7790_axi_qos *)SYS_AXI_SDS0_BASE;
+	writel(0x00000000, &axi_qos->qosconf);
+	writel(0x0000200A, &axi_qos->qosctset0);
+	writel(0x00000001, &axi_qos->qosreqctr);
+	writel(0x00002006, &axi_qos->qosthres0);
+	writel(0x00002001, &axi_qos->qosthres1);
+	writel(0x00000000, &axi_qos->qosthres2);
+	writel(0x00000001, &axi_qos->qosqon);
+
+	axi_qos = (struct r8a7790_axi_qos *)SYS_AXI_SDS1_BASE;
+	writel(0x00000000, &axi_qos->qosconf);
+	writel(0x0000200A, &axi_qos->qosctset0);
+	writel(0x00000001, &axi_qos->qosreqctr);
+	writel(0x00002006, &axi_qos->qosthres0);
+	writel(0x00002001, &axi_qos->qosthres1);
+	writel(0x00000000, &axi_qos->qosthres2);
+	writel(0x00000001, &axi_qos->qosqon);
+
+	axi_qos = (struct r8a7790_axi_qos *)SYS_AXI_USB20_BASE;
+	writel(0x00000000, &axi_qos->qosconf);
+	writel(0x00002005, &axi_qos->qosctset0);
+	writel(0x00000001, &axi_qos->qosreqctr);
+	writel(0x00002006, &axi_qos->qosthres0);
+	writel(0x00002001, &axi_qos->qosthres1);
+	writel(0x00000000, &axi_qos->qosthres2);
+	writel(0x00000001, &axi_qos->qosqon);
+
+	axi_qos = (struct r8a7790_axi_qos *)SYS_AXI_USB21_BASE;
+	writel(0x00000000, &axi_qos->qosconf);
+	writel(0x00002005, &axi_qos->qosctset0);
+	writel(0x00000001, &axi_qos->qosreqctr);
+	writel(0x00002006, &axi_qos->qosthres0);
+	writel(0x00002001, &axi_qos->qosthres1);
+	writel(0x00000000, &axi_qos->qosthres2);
+	writel(0x00000001, &axi_qos->qosqon);
+
+	axi_qos = (struct r8a7790_axi_qos *)SYS_AXI_USB22_BASE;
+	writel(0x00000000, &axi_qos->qosconf);
+	writel(0x00002005, &axi_qos->qosctset0);
+	writel(0x00000001, &axi_qos->qosreqctr);
+	writel(0x00002006, &axi_qos->qosthres0);
+	writel(0x00002001, &axi_qos->qosthres1);
+	writel(0x00000000, &axi_qos->qosthres2);
+	writel(0x00000001, &axi_qos->qosqon);
+
+	axi_qos = (struct r8a7790_axi_qos *)SYS_AXI_USB30_BASE;
+	writel(0x00000000, &axi_qos->qosconf);
+	writel(0x00002014, &axi_qos->qosctset0);
+	writel(0x00000001, &axi_qos->qosreqctr);
+	writel(0x00002006, &axi_qos->qosthres0);
+	writel(0x00002001, &axi_qos->qosthres1);
+	writel(0x00000000, &axi_qos->qosthres2);
+	writel(0x00000001, &axi_qos->qosqon);
+
+	/* QoS Register (RT-AXI) */
+	axi_qos = (struct r8a7790_axi_qos *)RT_AXI_SHX_BASE;
+	writel(0x00000000, &axi_qos->qosconf);
+	writel(0x00002005, &axi_qos->qosctset0);
+	writel(0x00002009, &axi_qos->qosctset1);
+	writel(0x00002003, &axi_qos->qosctset2);
+	writel(0x00002003, &axi_qos->qosctset3);
+	writel(0x00000001, &axi_qos->qosreqctr);
+	writel(0x00002006, &axi_qos->qosthres0);
+	writel(0x00002001, &axi_qos->qosthres1);
+	writel(0x00000000, &axi_qos->qosthres2);
+	writel(0x00000001, &axi_qos->qosqon);
+
+	axi_qos = (struct r8a7790_axi_qos *)RT_AXI_RDS_BASE;
+	writel(0x00000000, &axi_qos->qosconf);
+	writel(0x00002007, &axi_qos->qosctset0);
+	writel(0x00000001, &axi_qos->qosreqctr);
+	writel(0x00002006, &axi_qos->qosthres0);
+	writel(0x00002001, &axi_qos->qosthres1);
+	writel(0x00000000, &axi_qos->qosthres2);
+	writel(0x00000001, &axi_qos->qosqon);
+
+	axi_qos = (struct r8a7790_axi_qos *)RT_AXI_RTX64TO128_BASE;
+	writel(0x00000002, &axi_qos->qosconf);
+	writel(0x0000200F, &axi_qos->qosctset0);
+	writel(0x00002009, &axi_qos->qosctset1);
+	writel(0x00002003, &axi_qos->qosctset2);
+	writel(0x00002003, &axi_qos->qosctset3);
+	writel(0x00000001, &axi_qos->qosreqctr);
+	writel(0x00002006, &axi_qos->qosthres0);
+	writel(0x00002001, &axi_qos->qosthres1);
+	writel(0x00000000, &axi_qos->qosthres2);
+	writel(0x00000001, &axi_qos->qosqon);
+
+	axi_qos = (struct r8a7790_axi_qos *)RT_AXI_STPRO_BASE;
+	writel(0x00000000, &axi_qos->qosconf);
+	writel(0x00002003, &axi_qos->qosctset0);
+	writel(0x00002009, &axi_qos->qosctset1);
+	writel(0x00002003, &axi_qos->qosctset2);
+	writel(0x00002003, &axi_qos->qosctset3);
+	writel(0x00000001, &axi_qos->qosreqctr);
+	writel(0x00002006, &axi_qos->qosthres0);
+	writel(0x00002001, &axi_qos->qosthres1);
+	writel(0x00000000, &axi_qos->qosthres2);
+	writel(0x00000001, &axi_qos->qosqon);
+
+	/* QoS Register (MP-AXI) */
+	axi_qos = (struct r8a7790_axi_qos *)MP_AXI_ADSP_BASE;
+	writel(0x00000000, &axi_qos->qosconf);
+	writel(0x00002007, &axi_qos->qosctset0);
+	writel(0x00000001, &axi_qos->qosreqctr);
+	writel(0x00002006, &axi_qos->qosthres0);
+	writel(0x00002001, &axi_qos->qosthres1);
+	writel(0x00000000, &axi_qos->qosthres2);
+	writel(0x00000001, &axi_qos->qosqon);
+
+	axi_qos = (struct r8a7790_axi_qos *)MP_AXI_ASDS0_BASE;
+	writel(0x00000001, &axi_qos->qosconf);
+	writel(0x00002014, &axi_qos->qosctset0);
+	writel(0x00000001, &axi_qos->qosreqctr);
+	writel(0x00002006, &axi_qos->qosthres0);
+	writel(0x00002001, &axi_qos->qosthres1);
+	writel(0x00000000, &axi_qos->qosthres2);
+	writel(0x00000001, &axi_qos->qosqon);
+
+	axi_qos = (struct r8a7790_axi_qos *)MP_AXI_ASDS1_BASE;
+	writel(0x00000001, &axi_qos->qosconf);
+	writel(0x00002014, &axi_qos->qosctset0);
+	writel(0x00000001, &axi_qos->qosreqctr);
+	writel(0x00002006, &axi_qos->qosthres0);
+	writel(0x00002001, &axi_qos->qosthres1);
+	writel(0x00000000, &axi_qos->qosthres2);
+	writel(0x00000001, &axi_qos->qosqon);
+
+	axi_qos = (struct r8a7790_axi_qos *)MP_AXI_MLP_BASE;
+	writel(0x00000000, &axi_qos->qosconf);
+	writel(0x00002002, &axi_qos->qosctset0);
+	writel(0x00000001, &axi_qos->qosreqctr);
+	writel(0x00002006, &axi_qos->qosthres0);
+	writel(0x00002001, &axi_qos->qosthres1);
+	writel(0x00000000, &axi_qos->qosthres2);
+	writel(0x00000001, &axi_qos->qosqon);
+
+	axi_qos = (struct r8a7790_axi_qos *)MP_AXI_MMUMP_BASE;
+	writel(0x00000001, &axi_qos->qosconf);
+	writel(0x00002001, &axi_qos->qosctset0);
+	writel(0x00002009, &axi_qos->qosctset1);
+	writel(0x00002003, &axi_qos->qosctset2);
+	writel(0x00002003, &axi_qos->qosctset3);
+	writel(0x00000001, &axi_qos->qosreqctr);
+	writel(0x00002006, &axi_qos->qosthres0);
+	writel(0x00002001, &axi_qos->qosthres1);
+	writel(0x00000000, &axi_qos->qosthres2);
+	writel(0x00000001, &axi_qos->qosqon);
+
+	axi_qos = (struct r8a7790_axi_qos *)MP_AXI_SPU_BASE;
+	writel(0x00000000, &axi_qos->qosconf);
+	writel(0x00002018, &axi_qos->qosctset0);
+	writel(0x00000001, &axi_qos->qosreqctr);
+	writel(0x00002006, &axi_qos->qosthres0);
+	writel(0x00002001, &axi_qos->qosthres1);
+	writel(0x00000000, &axi_qos->qosthres2);
+	writel(0x00000001, &axi_qos->qosqon);
+
+	axi_qos = (struct r8a7790_axi_qos *)MP_AXI_SPUC_BASE;
+	writel(0x00000000, &axi_qos->qosconf);
+	writel(0x0000200D, &axi_qos->qosctset0);
+	writel(0x00000001, &axi_qos->qosreqctr);
+	writel(0x00002006, &axi_qos->qosthres0);
+	writel(0x00002001, &axi_qos->qosthres1);
+	writel(0x00000000, &axi_qos->qosthres2);
+	writel(0x00000001, &axi_qos->qosqon);
+
+	/* QoS Register (SYS-AXI256) */
+	axi_qos = (struct r8a7790_axi_qos *)SYS_AXI256_AXI128TO256_BASE;
+	writel(0x00000002, &axi_qos->qosconf);
+	writel(0x0000200F, &axi_qos->qosctset0);
+	writel(0x00002009, &axi_qos->qosctset1);
+	writel(0x00002003, &axi_qos->qosctset2);
+	writel(0x00002003, &axi_qos->qosctset3);
+	writel(0x00000001, &axi_qos->qosreqctr);
+	writel(0x00002006, &axi_qos->qosthres0);
+	writel(0x00002001, &axi_qos->qosthres1);
+	writel(0x00000000, &axi_qos->qosthres2);
+	writel(0x00000001, &axi_qos->qosqon);
+
+	axi_qos = (struct r8a7790_axi_qos *)SYS_AXI256_SYX_BASE;
+	writel(0x00000002, &axi_qos->qosconf);
+	writel(0x0000200F, &axi_qos->qosctset0);
+	writel(0x00002009, &axi_qos->qosctset1);
+	writel(0x00002003, &axi_qos->qosctset2);
+	writel(0x00002003, &axi_qos->qosctset3);
+	writel(0x00000001, &axi_qos->qosreqctr);
+	writel(0x00002006, &axi_qos->qosthres0);
+	writel(0x00002001, &axi_qos->qosthres1);
+	writel(0x00000000, &axi_qos->qosthres2);
+	writel(0x00000001, &axi_qos->qosqon);
+
+	axi_qos = (struct r8a7790_axi_qos *)SYS_AXI256_MPX_BASE;
+	writel(0x00000002, &axi_qos->qosconf);
+	writel(0x0000200F, &axi_qos->qosctset0);
+	writel(0x00002009, &axi_qos->qosctset1);
+	writel(0x00002003, &axi_qos->qosctset2);
+	writel(0x00002003, &axi_qos->qosctset3);
+	writel(0x00000001, &axi_qos->qosreqctr);
+	writel(0x00002006, &axi_qos->qosthres0);
+	writel(0x00002001, &axi_qos->qosthres1);
+	writel(0x00000000, &axi_qos->qosthres2);
+	writel(0x00000001, &axi_qos->qosqon);
+
+	axi_qos = (struct r8a7790_axi_qos *)SYS_AXI256_MXI_BASE;
+	writel(0x00000002, &axi_qos->qosconf);
+	writel(0x0000200F, &axi_qos->qosctset0);
+	writel(0x00002009, &axi_qos->qosctset1);
+	writel(0x00002003, &axi_qos->qosctset2);
+	writel(0x00002003, &axi_qos->qosctset3);
+	writel(0x00000001, &axi_qos->qosreqctr);
+	writel(0x00002006, &axi_qos->qosthres0);
+	writel(0x00002001, &axi_qos->qosthres1);
+	writel(0x00000000, &axi_qos->qosthres2);
+	writel(0x00000001, &axi_qos->qosqon);
+
+	/* QoS Register (CCI-AXI) */
+	axi_qos = (struct r8a7790_axi_qos *)CCI_AXI_MMUS0_BASE;
+	writel(0x00000001, &axi_qos->qosconf);
+	writel(0x00002001, &axi_qos->qosctset0);
+	writel(0x00002009, &axi_qos->qosctset1);
+	writel(0x00002003, &axi_qos->qosctset2);
+	writel(0x00002003, &axi_qos->qosctset3);
+	writel(0x00000001, &axi_qos->qosreqctr);
+	writel(0x00002006, &axi_qos->qosthres0);
+	writel(0x00002001, &axi_qos->qosthres1);
+	writel(0x00000000, &axi_qos->qosthres2);
+	writel(0x00000001, &axi_qos->qosqon);
+
+	axi_qos = (struct r8a7790_axi_qos *)CCI_AXI_SYX2_BASE;
+	writel(0x00000002, &axi_qos->qosconf);
+	writel(0x0000200F, &axi_qos->qosctset0);
+	writel(0x00002009, &axi_qos->qosctset1);
+	writel(0x00002003, &axi_qos->qosctset2);
+	writel(0x00002003, &axi_qos->qosctset3);
+	writel(0x00000001, &axi_qos->qosreqctr);
+	writel(0x00002006, &axi_qos->qosthres0);
+	writel(0x00002001, &axi_qos->qosthres1);
+	writel(0x00000000, &axi_qos->qosthres2);
+	writel(0x00000001, &axi_qos->qosqon);
+
+	axi_qos = (struct r8a7790_axi_qos *)CCI_AXI_MMUR_BASE;
+	writel(0x00000001, &axi_qos->qosconf);
+	writel(0x00002001, &axi_qos->qosctset0);
+	writel(0x00002009, &axi_qos->qosctset1);
+	writel(0x00002003, &axi_qos->qosctset2);
+	writel(0x00002003, &axi_qos->qosctset3);
+	writel(0x00000001, &axi_qos->qosreqctr);
+	writel(0x00002006, &axi_qos->qosthres0);
+	writel(0x00002001, &axi_qos->qosthres1);
+	writel(0x00000000, &axi_qos->qosthres2);
+	writel(0x00000001, &axi_qos->qosqon);
+
+	axi_qos = (struct r8a7790_axi_qos *)CCI_AXI_MMUDS_BASE;
+	writel(0x00000001, &axi_qos->qosconf);
+	writel(0x00002001, &axi_qos->qosctset0);
+	writel(0x00002009, &axi_qos->qosctset1);
+	writel(0x00002003, &axi_qos->qosctset2);
+	writel(0x00002003, &axi_qos->qosctset3);
+	writel(0x00000001, &axi_qos->qosreqctr);
+	writel(0x00002006, &axi_qos->qosthres0);
+	writel(0x00002001, &axi_qos->qosthres1);
+	writel(0x00000000, &axi_qos->qosthres2);
+	writel(0x00000001, &axi_qos->qosqon);
+
+	axi_qos = (struct r8a7790_axi_qos *)CCI_AXI_MMUM_BASE;
+	writel(0x00000001, &axi_qos->qosconf);
+	writel(0x00002001, &axi_qos->qosctset0);
+	writel(0x00002009, &axi_qos->qosctset1);
+	writel(0x00002003, &axi_qos->qosctset2);
+	writel(0x00002003, &axi_qos->qosctset3);
+	writel(0x00000001, &axi_qos->qosreqctr);
+	writel(0x00002006, &axi_qos->qosthres0);
+	writel(0x00002001, &axi_qos->qosthres1);
+	writel(0x00000000, &axi_qos->qosthres2);
+	writel(0x00000001, &axi_qos->qosqon);
+
+	axi_qos = (struct r8a7790_axi_qos *)CCI_AXI_MXI_BASE;
+	writel(0x00000002, &axi_qos->qosconf);
+	writel(0x0000200F, &axi_qos->qosctset0);
+	writel(0x00002009, &axi_qos->qosctset1);
+	writel(0x00002003, &axi_qos->qosctset2);
+	writel(0x00002003, &axi_qos->qosctset3);
+	writel(0x00000001, &axi_qos->qosreqctr);
+	writel(0x00002006, &axi_qos->qosthres0);
+	writel(0x00002001, &axi_qos->qosthres1);
+	writel(0x00000000, &axi_qos->qosthres2);
+	writel(0x00000001, &axi_qos->qosqon);
+
+	axi_qos = (struct r8a7790_axi_qos *)CCI_AXI_MMUS1_BASE;
+	writel(0x00000001, &axi_qos->qosconf);
+	writel(0x00002001, &axi_qos->qosctset0);
+	writel(0x00002009, &axi_qos->qosctset1);
+	writel(0x00002003, &axi_qos->qosctset2);
+	writel(0x00002003, &axi_qos->qosctset3);
+	writel(0x00000001, &axi_qos->qosreqctr);
+	writel(0x00002006, &axi_qos->qosthres0);
+	writel(0x00002001, &axi_qos->qosthres1);
+	writel(0x00000000, &axi_qos->qosthres2);
+	writel(0x00000001, &axi_qos->qosqon);
+
+	axi_qos = (struct r8a7790_axi_qos *)CCI_AXI_MMUMP_BASE;
+	writel(0x00000001, &axi_qos->qosconf);
+	writel(0x00002001, &axi_qos->qosctset0);
+	writel(0x00002009, &axi_qos->qosctset1);
+	writel(0x00002003, &axi_qos->qosctset2);
+	writel(0x00002003, &axi_qos->qosctset3);
+	writel(0x00000001, &axi_qos->qosreqctr);
+	writel(0x00002006, &axi_qos->qosthres0);
+	writel(0x00002001, &axi_qos->qosthres1);
+	writel(0x00000000, &axi_qos->qosthres2);
+	writel(0x00000001, &axi_qos->qosqon);
+
+	/* QoS Register (Media-AXI) */
+	axi_qos = (struct r8a7790_axi_qos *)MEDIA_AXI_JPR_BASE;
+	writel(0x00000001, &axi_qos->qosconf);
+	writel(0x00002018, &axi_qos->qosctset0);
+	writel(0x00000020, &axi_qos->qosreqctr);
+	writel(0x00002006, &axi_qos->qosthres0);
+	writel(0x00002001, &axi_qos->qosthres1);
+	writel(0x00000001, &axi_qos->qosthres2);
+	writel(0x00000001, &axi_qos->qosqon);
+
+	axi_qos = (struct r8a7790_axi_qos *)MEDIA_AXI_JPW_BASE;
+	writel(0x00000001, &axi_qos->qosconf);
+	writel(0x00002018, &axi_qos->qosctset0);
+	writel(0x00000020, &axi_qos->qosreqctr);
+	writel(0x00002006, &axi_qos->qosthres0);
+	writel(0x00002001, &axi_qos->qosthres1);
+	writel(0x00000001, &axi_qos->qosthres2);
+	writel(0x00000001, &axi_qos->qosqon);
+
+	axi_qos = (struct r8a7790_axi_qos *)MEDIA_AXI_GCU0R_BASE;
+	writel(0x00000001, &axi_qos->qosconf);
+	writel(0x00002018, &axi_qos->qosctset0);
+	writel(0x00000020, &axi_qos->qosreqctr);
+	writel(0x00002006, &axi_qos->qosthres0);
+	writel(0x00002001, &axi_qos->qosthres1);
+	writel(0x00000001, &axi_qos->qosthres2);
+	writel(0x00000001, &axi_qos->qosqon);
+
+	axi_qos = (struct r8a7790_axi_qos *)MEDIA_AXI_GCU0W_BASE;
+	writel(0x00000001, &axi_qos->qosconf);
+	writel(0x00002018, &axi_qos->qosctset0);
+	writel(0x00000020, &axi_qos->qosreqctr);
+	writel(0x00002006, &axi_qos->qosthres0);
+	writel(0x00002001, &axi_qos->qosthres1);
+	writel(0x00000001, &axi_qos->qosthres2);
+	writel(0x00000001, &axi_qos->qosqon);
+
+	axi_qos = (struct r8a7790_axi_qos *)MEDIA_AXI_GCU1R_BASE;
+	writel(0x00000001, &axi_qos->qosconf);
+	writel(0x00002018, &axi_qos->qosctset0);
+	writel(0x00000020, &axi_qos->qosreqctr);
+	writel(0x00002006, &axi_qos->qosthres0);
+	writel(0x00002001, &axi_qos->qosthres1);
+	writel(0x00000001, &axi_qos->qosthres2);
+	writel(0x00000001, &axi_qos->qosqon);
+
+	axi_qos = (struct r8a7790_axi_qos *)MEDIA_AXI_GCU1W_BASE;
+	writel(0x00000001, &axi_qos->qosconf);
+	writel(0x00002018, &axi_qos->qosctset0);
+	writel(0x00000020, &axi_qos->qosreqctr);
+	writel(0x00002006, &axi_qos->qosthres0);
+	writel(0x00002001, &axi_qos->qosthres1);
+	writel(0x00000001, &axi_qos->qosthres2);
+	writel(0x00000001, &axi_qos->qosqon);
+
+	axi_qos = (struct r8a7790_axi_qos *)MEDIA_AXI_TDMR_BASE;
+	writel(0x00000001, &axi_qos->qosconf);
+	writel(0x00002018, &axi_qos->qosctset0);
+	writel(0x00000020, &axi_qos->qosreqctr);
+	writel(0x00002006, &axi_qos->qosthres0);
+	writel(0x00002001, &axi_qos->qosthres1);
+	writel(0x00000001, &axi_qos->qosthres2);
+	writel(0x00000001, &axi_qos->qosqon);
+
+	axi_qos = (struct r8a7790_axi_qos *)MEDIA_AXI_TDMW_BASE;
+	writel(0x00000001, &axi_qos->qosconf);
+	writel(0x00002018, &axi_qos->qosctset0);
+	writel(0x00000020, &axi_qos->qosreqctr);
+	writel(0x00002006, &axi_qos->qosthres0);
+	writel(0x00002001, &axi_qos->qosthres1);
+	writel(0x00000001, &axi_qos->qosthres2);
+	writel(0x00000001, &axi_qos->qosqon);
+
+	axi_qos = (struct r8a7790_axi_qos *)MEDIA_AXI_VSP0CR_BASE;
+	writel(0x00000001, &axi_qos->qosconf);
+	writel(0x00002018, &axi_qos->qosctset0);
+	writel(0x00000020, &axi_qos->qosreqctr);
+	writel(0x00002006, &axi_qos->qosthres0);
+	writel(0x00002001, &axi_qos->qosthres1);
+	writel(0x00000001, &axi_qos->qosthres2);
+	writel(0x00000001, &axi_qos->qosqon);
+
+	axi_qos = (struct r8a7790_axi_qos *)MEDIA_AXI_VSP0CW_BASE;
+	writel(0x00000001, &axi_qos->qosconf);
+	writel(0x00002018, &axi_qos->qosctset0);
+	writel(0x00000020, &axi_qos->qosreqctr);
+	writel(0x00002006, &axi_qos->qosthres0);
+	writel(0x00002001, &axi_qos->qosthres1);
+	writel(0x00000001, &axi_qos->qosthres2);
+	writel(0x00000001, &axi_qos->qosqon);
+
+	axi_qos = (struct r8a7790_axi_qos *)MEDIA_AXI_VSP1CR_BASE;
+	writel(0x00000001, &axi_qos->qosconf);
+	writel(0x00002018, &axi_qos->qosctset0);
+	writel(0x00000020, &axi_qos->qosreqctr);
+	writel(0x00002006, &axi_qos->qosthres0);
+	writel(0x00002001, &axi_qos->qosthres1);
+	writel(0x00000001, &axi_qos->qosthres2);
+	writel(0x00000001, &axi_qos->qosqon);
+
+	axi_qos = (struct r8a7790_axi_qos *)MEDIA_AXI_VSP1CW_BASE;
+	writel(0x00000001, &axi_qos->qosconf);
+	writel(0x00002018, &axi_qos->qosctset0);
+	writel(0x00000020, &axi_qos->qosreqctr);
+	writel(0x00002006, &axi_qos->qosthres0);
+	writel(0x00002001, &axi_qos->qosthres1);
+	writel(0x00000001, &axi_qos->qosthres2);
+	writel(0x00000001, &axi_qos->qosqon);
+
+	axi_qos = (struct r8a7790_axi_qos *)MEDIA_AXI_VSPDU0CR_BASE;
+	writel(0x00000001, &axi_qos->qosconf);
+	writel(0x00002018, &axi_qos->qosctset0);
+	writel(0x00000020, &axi_qos->qosreqctr);
+	writel(0x00002006, &axi_qos->qosthres0);
+	writel(0x00002001, &axi_qos->qosthres1);
+	writel(0x00000001, &axi_qos->qosthres2);
+	writel(0x00000001, &axi_qos->qosqon);
+
+	axi_qos = (struct r8a7790_axi_qos *)MEDIA_AXI_VSPDU0CW_BASE;
+	writel(0x00000001, &axi_qos->qosconf);
+	writel(0x00002018, &axi_qos->qosctset0);
+	writel(0x00000020, &axi_qos->qosreqctr);
+	writel(0x00002006, &axi_qos->qosthres0);
+	writel(0x00002001, &axi_qos->qosthres1);
+	writel(0x00000001, &axi_qos->qosthres2);
+	writel(0x00000001, &axi_qos->qosqon);
+
+	axi_qos = (struct r8a7790_axi_qos *)MEDIA_AXI_VSPDU1CR_BASE;
+	writel(0x00000001, &axi_qos->qosconf);
+	writel(0x00002018, &axi_qos->qosctset0);
+	writel(0x00000020, &axi_qos->qosreqctr);
+	writel(0x00002006, &axi_qos->qosthres0);
+	writel(0x00002001, &axi_qos->qosthres1);
+	writel(0x00000001, &axi_qos->qosthres2);
+	writel(0x00000001, &axi_qos->qosqon);
+
+	axi_qos = (struct r8a7790_axi_qos *)MEDIA_AXI_VSPDU1CW_BASE;
+	writel(0x00000001, &axi_qos->qosconf);
+	writel(0x00002018, &axi_qos->qosctset0);
+	writel(0x00000020, &axi_qos->qosreqctr);
+	writel(0x00002006, &axi_qos->qosthres0);
+	writel(0x00002001, &axi_qos->qosthres1);
+	writel(0x00000001, &axi_qos->qosthres2);
+	writel(0x00000001, &axi_qos->qosqon);
+
+	axi_qos = (struct r8a7790_axi_qos *)MEDIA_AXI_VIN0W_BASE;
+	writel(0x00000001, &axi_qos->qosconf);
+	writel(0x0000200C, &axi_qos->qosctset0);
+	writel(0x00000020, &axi_qos->qosreqctr);
+	writel(0x00002006, &axi_qos->qosthres0);
+	writel(0x00002001, &axi_qos->qosthres1);
+	writel(0x00000001, &axi_qos->qosthres2);
+	writel(0x00000001, &axi_qos->qosqon);
+
+	axi_qos = (struct r8a7790_axi_qos *)MEDIA_AXI_VSP0R_BASE;
+	writel(0x00000001, &axi_qos->qosconf);
+	writel(0x0000200C, &axi_qos->qosctset0);
+	writel(0x00000020, &axi_qos->qosreqctr);
+	writel(0x00002006, &axi_qos->qosthres0);
+	writel(0x00002001, &axi_qos->qosthres1);
+	writel(0x00000001, &axi_qos->qosthres2);
+	writel(0x00000001, &axi_qos->qosqon);
+
+	axi_qos = (struct r8a7790_axi_qos *)MEDIA_AXI_VSP0W_BASE;
+	writel(0x00000001, &axi_qos->qosconf);
+	writel(0x0000200C, &axi_qos->qosctset0);
+	writel(0x00000020, &axi_qos->qosreqctr);
+	writel(0x00002006, &axi_qos->qosthres0);
+	writel(0x00002001, &axi_qos->qosthres1);
+	writel(0x00000001, &axi_qos->qosthres2);
+	writel(0x00000001, &axi_qos->qosqon);
+
+	axi_qos = (struct r8a7790_axi_qos *)MEDIA_AXI_FDP0R_BASE;
+	writel(0x00000001, &axi_qos->qosconf);
+	writel(0x0000200C, &axi_qos->qosctset0);
+	writel(0x00000020, &axi_qos->qosreqctr);
+	writel(0x00002006, &axi_qos->qosthres0);
+	writel(0x00002001, &axi_qos->qosthres1);
+	writel(0x00000001, &axi_qos->qosthres2);
+	writel(0x00000001, &axi_qos->qosqon);
+
+	axi_qos = (struct r8a7790_axi_qos *)MEDIA_AXI_FDP0W_BASE;
+	writel(0x00000001, &axi_qos->qosconf);
+	writel(0x0000200C, &axi_qos->qosctset0);
+	writel(0x00000020, &axi_qos->qosreqctr);
+	writel(0x00002006, &axi_qos->qosthres0);
+	writel(0x00002001, &axi_qos->qosthres1);
+	writel(0x00000001, &axi_qos->qosthres2);
+	writel(0x00000001, &axi_qos->qosqon);
+
+	axi_qos = (struct r8a7790_axi_qos *)MEDIA_AXI_IMSR_BASE;
+	writel(0x00000001, &axi_qos->qosconf);
+	writel(0x0000200C, &axi_qos->qosctset0);
+	writel(0x00000020, &axi_qos->qosreqctr);
+	writel(0x00002006, &axi_qos->qosthres0);
+	writel(0x00002001, &axi_qos->qosthres1);
+	writel(0x00000001, &axi_qos->qosthres2);
+	writel(0x00000001, &axi_qos->qosqon);
+
+	axi_qos = (struct r8a7790_axi_qos *)MEDIA_AXI_IMSW_BASE;
+	writel(0x00000001, &axi_qos->qosconf);
+	writel(0x0000200C, &axi_qos->qosctset0);
+	writel(0x00000020, &axi_qos->qosreqctr);
+	writel(0x00002006, &axi_qos->qosthres0);
+	writel(0x00002001, &axi_qos->qosthres1);
+	writel(0x00000001, &axi_qos->qosthres2);
+	writel(0x00000001, &axi_qos->qosqon);
+
+	axi_qos = (struct r8a7790_axi_qos *)MEDIA_AXI_VSP1R_BASE;
+	writel(0x00000001, &axi_qos->qosconf);
+	writel(0x0000200C, &axi_qos->qosctset0);
+	writel(0x00000020, &axi_qos->qosreqctr);
+	writel(0x00002006, &axi_qos->qosthres0);
+	writel(0x00002001, &axi_qos->qosthres1);
+	writel(0x00000001, &axi_qos->qosthres2);
+	writel(0x00000001, &axi_qos->qosqon);
+
+	axi_qos = (struct r8a7790_axi_qos *)MEDIA_AXI_VSP1W_BASE;
+	writel(0x00000001, &axi_qos->qosconf);
+	writel(0x0000200C, &axi_qos->qosctset0);
+	writel(0x00000020, &axi_qos->qosreqctr);
+	writel(0x00002006, &axi_qos->qosthres0);
+	writel(0x00002001, &axi_qos->qosthres1);
+	writel(0x00000001, &axi_qos->qosthres2);
+	writel(0x00000001, &axi_qos->qosqon);
+
+	axi_qos = (struct r8a7790_axi_qos *)MEDIA_AXI_FDP1R_BASE;
+	writel(0x00000001, &axi_qos->qosconf);
+	writel(0x0000200C, &axi_qos->qosctset0);
+	writel(0x00000020, &axi_qos->qosreqctr);
+	writel(0x00002006, &axi_qos->qosthres0);
+	writel(0x00002001, &axi_qos->qosthres1);
+	writel(0x00000001, &axi_qos->qosthres2);
+	writel(0x00000001, &axi_qos->qosqon);
+
+	axi_qos = (struct r8a7790_axi_qos *)MEDIA_AXI_FDP1W_BASE;
+	writel(0x00000001, &axi_qos->qosconf);
+	writel(0x0000200C, &axi_qos->qosctset0);
+	writel(0x00000020, &axi_qos->qosreqctr);
+	writel(0x00002006, &axi_qos->qosthres0);
+	writel(0x00002001, &axi_qos->qosthres1);
+	writel(0x00000001, &axi_qos->qosthres2);
+	writel(0x00000001, &axi_qos->qosqon);
+
+	axi_qos = (struct r8a7790_axi_qos *)MEDIA_AXI_IMRR_BASE;
+	writel(0x00000001, &axi_qos->qosconf);
+	writel(0x0000200C, &axi_qos->qosctset0);
+	writel(0x00000020, &axi_qos->qosreqctr);
+	writel(0x00002006, &axi_qos->qosthres0);
+	writel(0x00002001, &axi_qos->qosthres1);
+	writel(0x00000001, &axi_qos->qosthres2);
+	writel(0x00000001, &axi_qos->qosqon);
+
+	axi_qos = (struct r8a7790_axi_qos *)MEDIA_AXI_IMRW_BASE;
+	writel(0x00000001, &axi_qos->qosconf);
+	writel(0x0000200C, &axi_qos->qosctset0);
+	writel(0x00000020, &axi_qos->qosreqctr);
+	writel(0x00002006, &axi_qos->qosthres0);
+	writel(0x00002001, &axi_qos->qosthres1);
+	writel(0x00000001, &axi_qos->qosthres2);
+	writel(0x00000001, &axi_qos->qosqon);
+
+	axi_qos = (struct r8a7790_axi_qos *)MEDIA_AXI_FDP2R_BASE;
+	writel(0x00000001, &axi_qos->qosconf);
+	writel(0x0000200C, &axi_qos->qosctset0);
+	writel(0x00000020, &axi_qos->qosreqctr);
+	writel(0x00002006, &axi_qos->qosthres0);
+	writel(0x00002001, &axi_qos->qosthres1);
+	writel(0x00000001, &axi_qos->qosthres2);
+	writel(0x00000001, &axi_qos->qosqon);
+
+	axi_qos = (struct r8a7790_axi_qos *)MEDIA_AXI_FDP2W_BASE;
+	writel(0x00000001, &axi_qos->qosconf);
+	writel(0x0000200C, &axi_qos->qosctset0);
+	writel(0x00000020, &axi_qos->qosreqctr);
+	writel(0x00002006, &axi_qos->qosthres0);
+	writel(0x00002001, &axi_qos->qosthres1);
+	writel(0x00000001, &axi_qos->qosthres2);
+	writel(0x00000001, &axi_qos->qosqon);
+
+	axi_qos = (struct r8a7790_axi_qos *)MEDIA_AXI_VSPD0R_BASE;
+	writel(0x00000000, &axi_qos->qosconf);
+	writel(0x0000200C, &axi_qos->qosctset0);
+	writel(0x00000001, &axi_qos->qosreqctr);
+	writel(0x00002006, &axi_qos->qosthres0);
+	writel(0x00002001, &axi_qos->qosthres1);
+	writel(0x00000001, &axi_qos->qosthres2);
+	writel(0x00000001, &axi_qos->qosqon);
+
+	axi_qos = (struct r8a7790_axi_qos *)MEDIA_AXI_VSPD0W_BASE;
+	writel(0x00000000, &axi_qos->qosconf);
+	writel(0x0000200C, &axi_qos->qosctset0);
+	writel(0x00000001, &axi_qos->qosreqctr);
+	writel(0x00002006, &axi_qos->qosthres0);
+	writel(0x00002001, &axi_qos->qosthres1);
+	writel(0x00000001, &axi_qos->qosthres2);
+	writel(0x00000001, &axi_qos->qosqon);
+
+	axi_qos = (struct r8a7790_axi_qos *)MEDIA_AXI_VSPD1R_BASE;
+	writel(0x00000000, &axi_qos->qosconf);
+	writel(0x0000200C, &axi_qos->qosctset0);
+	writel(0x00000001, &axi_qos->qosreqctr);
+	writel(0x00002006, &axi_qos->qosthres0);
+	writel(0x00002001, &axi_qos->qosthres1);
+	writel(0x00000001, &axi_qos->qosthres2);
+	writel(0x00000001, &axi_qos->qosqon);
+
+	axi_qos = (struct r8a7790_axi_qos *)MEDIA_AXI_VSPD1W_BASE;
+	writel(0x00000000, &axi_qos->qosconf);
+	writel(0x0000200C, &axi_qos->qosctset0);
+	writel(0x00000001, &axi_qos->qosreqctr);
+	writel(0x00002006, &axi_qos->qosthres0);
+	writel(0x00002001, &axi_qos->qosthres1);
+	writel(0x00000001, &axi_qos->qosthres2);
+	writel(0x00000001, &axi_qos->qosqon);
+
+	axi_qos = (struct r8a7790_axi_qos *)MEDIA_AXI_DU0R_BASE;
+	writel(0x00000000, &axi_qos->qosconf);
+	writel(0x0000200C, &axi_qos->qosctset0);
+	writel(0x00000001, &axi_qos->qosreqctr);
+	writel(0x00002006, &axi_qos->qosthres0);
+	writel(0x00002001, &axi_qos->qosthres1);
+	writel(0x00000001, &axi_qos->qosthres2);
+	writel(0x00000001, &axi_qos->qosqon);
+
+	axi_qos = (struct r8a7790_axi_qos *)MEDIA_AXI_DU0W_BASE;
+	writel(0x00000000, &axi_qos->qosconf);
+	writel(0x0000200C, &axi_qos->qosctset0);
+	writel(0x00000001, &axi_qos->qosreqctr);
+	writel(0x00002006, &axi_qos->qosthres0);
+	writel(0x00002001, &axi_qos->qosthres1);
+	writel(0x00000001, &axi_qos->qosthres2);
+	writel(0x00000001, &axi_qos->qosqon);
+
+	axi_qos = (struct r8a7790_axi_qos *)MEDIA_AXI_DU1R_BASE;
+	writel(0x00000000, &axi_qos->qosconf);
+	writel(0x0000200C, &axi_qos->qosctset0);
+	writel(0x00000001, &axi_qos->qosreqctr);
+	writel(0x00002006, &axi_qos->qosthres0);
+	writel(0x00002001, &axi_qos->qosthres1);
+	writel(0x00000001, &axi_qos->qosthres2);
+	writel(0x00000001, &axi_qos->qosqon);
+
+	axi_qos = (struct r8a7790_axi_qos *)MEDIA_AXI_DU1W_BASE;
+	writel(0x00000000, &axi_qos->qosconf);
+	writel(0x0000200C, &axi_qos->qosctset0);
+	writel(0x00000001, &axi_qos->qosreqctr);
+	writel(0x00002006, &axi_qos->qosthres0);
+	writel(0x00002001, &axi_qos->qosthres1);
+	writel(0x00000001, &axi_qos->qosthres2);
+	writel(0x00000001, &axi_qos->qosqon);
+
+	axi_qos = (struct r8a7790_axi_qos *)MEDIA_AXI_VCP0CR_BASE;
+	writel(0x00000001, &axi_qos->qosconf);
+	writel(0x00002007, &axi_qos->qosctset0);
+	writel(0x00000020, &axi_qos->qosreqctr);
+	writel(0x00002006, &axi_qos->qosthres0);
+	writel(0x00002001, &axi_qos->qosthres1);
+	writel(0x00000001, &axi_qos->qosthres2);
+	writel(0x00000001, &axi_qos->qosqon);
+
+	axi_qos = (struct r8a7790_axi_qos *)MEDIA_AXI_VCP0CW_BASE;
+	writel(0x00000001, &axi_qos->qosconf);
+	writel(0x00002007, &axi_qos->qosctset0);
+	writel(0x00000020, &axi_qos->qosreqctr);
+	writel(0x00002006, &axi_qos->qosthres0);
+	writel(0x00002001, &axi_qos->qosthres1);
+	writel(0x00000001, &axi_qos->qosthres2);
+	writel(0x00000001, &axi_qos->qosqon);
+
+	axi_qos = (struct r8a7790_axi_qos *)MEDIA_AXI_VCP0VR_BASE;
+	writel(0x00000001, &axi_qos->qosconf);
+	writel(0x00002007, &axi_qos->qosctset0);
+	writel(0x00000020, &axi_qos->qosreqctr);
+	writel(0x00002006, &axi_qos->qosthres0);
+	writel(0x00002001, &axi_qos->qosthres1);
+	writel(0x00000001, &axi_qos->qosthres2);
+	writel(0x00000001, &axi_qos->qosqon);
+
+	axi_qos = (struct r8a7790_axi_qos *)MEDIA_AXI_VCP0VW_BASE;
+	writel(0x00000001, &axi_qos->qosconf);
+	writel(0x00002007, &axi_qos->qosctset0);
+	writel(0x00000020, &axi_qos->qosreqctr);
+	writel(0x00002006, &axi_qos->qosthres0);
+	writel(0x00002001, &axi_qos->qosthres1);
+	writel(0x00000001, &axi_qos->qosthres2);
+	writel(0x00000001, &axi_qos->qosqon);
+
+	axi_qos = (struct r8a7790_axi_qos *)MEDIA_AXI_VPC0R_BASE;
+	writel(0x00000001, &axi_qos->qosconf);
+	writel(0x00002007, &axi_qos->qosctset0);
+	writel(0x00000020, &axi_qos->qosreqctr);
+	writel(0x00002006, &axi_qos->qosthres0);
+	writel(0x00002001, &axi_qos->qosthres1);
+	writel(0x00000001, &axi_qos->qosthres2);
+	writel(0x00000001, &axi_qos->qosqon);
+
+	axi_qos = (struct r8a7790_axi_qos *)MEDIA_AXI_VCP1CR_BASE;
+	writel(0x00000001, &axi_qos->qosconf);
+	writel(0x00002007, &axi_qos->qosctset0);
+	writel(0x00000020, &axi_qos->qosreqctr);
+	writel(0x00002006, &axi_qos->qosthres0);
+	writel(0x00002001, &axi_qos->qosthres1);
+	writel(0x00000001, &axi_qos->qosthres2);
+	writel(0x00000001, &axi_qos->qosqon);
+
+	axi_qos = (struct r8a7790_axi_qos *)MEDIA_AXI_VCP1CW_BASE;
+	writel(0x00000001, &axi_qos->qosconf);
+	writel(0x00002007, &axi_qos->qosctset0);
+	writel(0x00000020, &axi_qos->qosreqctr);
+	writel(0x00002006, &axi_qos->qosthres0);
+	writel(0x00002001, &axi_qos->qosthres1);
+	writel(0x00000001, &axi_qos->qosthres2);
+	writel(0x00000001, &axi_qos->qosqon);
+
+	axi_qos = (struct r8a7790_axi_qos *)MEDIA_AXI_VCP1VR_BASE;
+	writel(0x00000001, &axi_qos->qosconf);
+	writel(0x00002007, &axi_qos->qosctset0);
+	writel(0x00000020, &axi_qos->qosreqctr);
+	writel(0x00002006, &axi_qos->qosthres0);
+	writel(0x00002001, &axi_qos->qosthres1);
+	writel(0x00000001, &axi_qos->qosthres2);
+	writel(0x00000001, &axi_qos->qosqon);
+
+	axi_qos = (struct r8a7790_axi_qos *)MEDIA_AXI_VCP1VW_BASE;
+	writel(0x00000001, &axi_qos->qosconf);
+	writel(0x00002007, &axi_qos->qosctset0);
+	writel(0x00000020, &axi_qos->qosreqctr);
+	writel(0x00002006, &axi_qos->qosthres0);
+	writel(0x00002001, &axi_qos->qosthres1);
+	writel(0x00000001, &axi_qos->qosthres2);
+	writel(0x00000001, &axi_qos->qosqon);
+
+	axi_qos = (struct r8a7790_axi_qos *)MEDIA_AXI_VPC1R_BASE;
+	writel(0x00000001, &axi_qos->qosconf);
+	writel(0x00002007, &axi_qos->qosctset0);
+	writel(0x00000020, &axi_qos->qosreqctr);
+	writel(0x00002006, &axi_qos->qosthres0);
+	writel(0x00002001, &axi_qos->qosthres1);
+	writel(0x00000001, &axi_qos->qosthres2);
+	writel(0x00000000, &axi_qos->qosqon);
+}
diff --git a/board/renesas/lager/qos.h b/board/renesas/lager/qos.h
new file mode 100644
index 0000000000..9a6c0461be
--- /dev/null
+++ b/board/renesas/lager/qos.h
@@ -0,0 +1,12 @@
+/*
+ * Copyright (C) 2013 Renesas Electronics Corporation
+ *
+ * SPDX-License-Identifier: GPL-2.0
+ */
+
+#ifndef __QOS_H__
+#define __QOS_H__
+
+void qos_init(void);
+
+#endif
diff --git a/board/ronetix/pm9261/led.c b/board/ronetix/pm9261/led.c
index 223a516179..cc4c2a072b 100644
--- a/board/ronetix/pm9261/led.c
+++ b/board/ronetix/pm9261/led.c
@@ -8,9 +8,9 @@
  */
 
 #include <common.h>
+#include <asm/gpio.h>
 #include <asm/arch/at91_pmc.h>
 #include <asm/arch/gpio.h>
-#include <asm/io.h>
 
 void coloured_LED_init(void)
 {
@@ -19,11 +19,11 @@ void coloured_LED_init(void)
 	/* Enable clock */
 	writel(1 << ATMEL_ID_PIOC, &pmc->pcer);
 
-	at91_set_pio_output(CONFIG_RED_LED, 1);
-	at91_set_pio_output(CONFIG_GREEN_LED, 1);
-	at91_set_pio_output(CONFIG_YELLOW_LED, 1);
+	gpio_direction_output(CONFIG_RED_LED, 1);
+	gpio_direction_output(CONFIG_GREEN_LED, 1);
+	gpio_direction_output(CONFIG_YELLOW_LED, 1);
 
-	at91_set_pio_value(CONFIG_RED_LED, 0);
-	at91_set_pio_value(CONFIG_GREEN_LED, 1);
-	at91_set_pio_value(CONFIG_YELLOW_LED, 1);
+	gpio_set_value(CONFIG_RED_LED, 0);
+	gpio_set_value(CONFIG_GREEN_LED, 1);
+	gpio_set_value(CONFIG_YELLOW_LED, 1);
 }
diff --git a/board/ronetix/pm9261/pm9261.c b/board/ronetix/pm9261/pm9261.c
index a2a569b0cd..a63438343e 100644
--- a/board/ronetix/pm9261/pm9261.c
+++ b/board/ronetix/pm9261/pm9261.c
@@ -11,6 +11,7 @@
 #include <common.h>
 #include <asm/sizes.h>
 #include <asm/io.h>
+#include <asm/gpio.h>
 #include <asm/arch/at91sam9_smc.h>
 #include <asm/arch/at91_common.h>
 #include <asm/arch/at91_pmc.h>
@@ -73,10 +74,10 @@ static void pm9261_nand_hw_init(void)
 		&pmc->pcer);
 
 	/* Configure RDY/BSY */
-	at91_set_pio_input(CONFIG_SYS_NAND_READY_PIN, 1);
+	gpio_direction_input(CONFIG_SYS_NAND_READY_PIN);
 
 	/* Enable NandFlash */
-	at91_set_pio_output(CONFIG_SYS_NAND_ENABLE_PIN, 1);
+	gpio_direction_output(CONFIG_SYS_NAND_ENABLE_PIN, 1);
 
 	at91_set_a_periph(AT91_PIO_PORTC, 0, 0);	/* NANDOE */
 	at91_set_a_periph(AT91_PIO_PORTC, 1, 0);	/* NANDWE */
diff --git a/board/ronetix/pm9263/led.c b/board/ronetix/pm9263/led.c
index 44e3430900..bfc2310b0e 100644
--- a/board/ronetix/pm9263/led.c
+++ b/board/ronetix/pm9263/led.c
@@ -8,9 +8,9 @@
  */
 
 #include <common.h>
+#include <asm/gpio.h>
 #include <asm/arch/at91_pmc.h>
 #include <asm/arch/gpio.h>
-#include <asm/io.h>
 
 void coloured_LED_init(void)
 {
@@ -19,9 +19,9 @@ void coloured_LED_init(void)
 	/* Enable clock */
 	writel(1 << ATMEL_ID_PIOB, &pmc->pcer);
 
-	at91_set_pio_output(CONFIG_RED_LED, 1);
-	at91_set_pio_output(CONFIG_GREEN_LED, 1);
+	gpio_direction_output(CONFIG_RED_LED, 1);
+	gpio_direction_output(CONFIG_GREEN_LED, 1);
 
-	at91_set_pio_value(CONFIG_RED_LED, 0);
-	at91_set_pio_value(CONFIG_GREEN_LED, 1);
+	gpio_set_value(CONFIG_RED_LED, 0);
+	gpio_set_value(CONFIG_GREEN_LED, 1);
 }
diff --git a/board/ronetix/pm9263/pm9263.c b/board/ronetix/pm9263/pm9263.c
index 48eba99d00..3cedeef8ae 100644
--- a/board/ronetix/pm9263/pm9263.c
+++ b/board/ronetix/pm9263/pm9263.c
@@ -11,6 +11,7 @@
 #include <common.h>
 #include <asm/sizes.h>
 #include <asm/io.h>
+#include <asm/gpio.h>
 #include <asm/arch/at91sam9_smc.h>
 #include <asm/arch/at91_common.h>
 #include <asm/arch/at91_pmc.h>
@@ -67,10 +68,10 @@ static void pm9263_nand_hw_init(void)
 		&smc->cs[3].mode);
 
 	/* Configure RDY/BSY */
-	at91_set_pio_input(CONFIG_SYS_NAND_READY_PIN, 1);
+	gpio_direction_input(CONFIG_SYS_NAND_READY_PIN);
 
 	/* Enable NandFlash */
-	at91_set_pio_output(CONFIG_SYS_NAND_ENABLE_PIN, 1);
+	gpio_direction_output(CONFIG_SYS_NAND_ENABLE_PIN, 1);
 }
 #endif
 
diff --git a/board/ronetix/pm9g45/pm9g45.c b/board/ronetix/pm9g45/pm9g45.c
index 5bb5a3c102..c9f2747007 100644
--- a/board/ronetix/pm9g45/pm9g45.c
+++ b/board/ronetix/pm9g45/pm9g45.c
@@ -14,6 +14,7 @@
 #include <common.h>
 #include <asm/sizes.h>
 #include <asm/io.h>
+#include <asm/gpio.h>
 #include <asm/arch/at91sam9_smc.h>
 #include <asm/arch/at91_common.h>
 #include <asm/arch/at91_pmc.h>
@@ -66,11 +67,11 @@ static void pm9g45_nand_hw_init(void)
 
 #ifdef CONFIG_SYS_NAND_READY_PIN
 	/* Configure RDY/BSY */
-	at91_set_pio_input(CONFIG_SYS_NAND_READY_PIN, 1);
+	gpio_direction_input(CONFIG_SYS_NAND_READY_PIN);
 #endif
 
 	/* Enable NandFlash */
-	at91_set_pio_output(CONFIG_SYS_NAND_ENABLE_PIN, 1);
+	gpio_direction_output(CONFIG_SYS_NAND_ENABLE_PIN, 1);
 }
 #endif
 
diff --git a/board/samsung/trats/trats.c b/board/samsung/trats/trats.c
index 44be5fcaf9..8aba51c009 100644
--- a/board/samsung/trats/trats.c
+++ b/board/samsung/trats/trats.c
@@ -504,6 +504,17 @@ int board_usb_init(int index, enum usb_init_type init)
 	debug("USB_udc_probe\n");
 	return s3c_udc_probe(&s5pc210_otg_data);
 }
+
+#ifdef CONFIG_USB_CABLE_CHECK
+int usb_cable_connected(void)
+{
+	struct pmic *muic = pmic_get("MAX8997_MUIC");
+	if (!muic)
+		return 0;
+
+	return !!muic->chrg->chrg_type(muic);
+}
+#endif
 #endif
 
 static void pmic_reset(void)
diff --git a/board/samsung/trats2/trats2.c b/board/samsung/trats2/trats2.c
index 8df85ee396..147de179cc 100644
--- a/board/samsung/trats2/trats2.c
+++ b/board/samsung/trats2/trats2.c
@@ -25,6 +25,9 @@
 #include <power/max77693_fg.h>
 #include <libtizen.h>
 #include <errno.h>
+#include <usb.h>
+#include <usb/s3c_udc.h>
+#include <usb_mass_storage.h>
 
 DECLARE_GLOBAL_DATA_PTR;
 
@@ -40,7 +43,7 @@ static void check_hw_revision(void)
 	int modelrev = 0;
 	int i;
 
-	gpio2 = (struct exynos4x12_gpio_part2 *)EXYNOS4X12_GPIO_PART2_BASE;
+	gpio2 = (struct exynos4x12_gpio_part2 *)samsung_get_base_gpio_part2();
 
 	/*
 	 * GPM1[1:0]: MODEL_REV[1:0]
@@ -90,7 +93,7 @@ static inline u32 get_model_rev(void)
 
 static void board_external_gpio_init(void)
 {
-	gpio2 = (struct exynos4x12_gpio_part2 *)EXYNOS4X12_GPIO_PART2_BASE;
+	gpio2 = (struct exynos4x12_gpio_part2 *)samsung_get_base_gpio_part2();
 
 	/*
 	 * some pins which in alive block are connected with external pull-up
@@ -117,8 +120,8 @@ static void board_init_i2c(void)
 {
 	int err;
 
-	gpio1 = (struct exynos4x12_gpio_part1 *)EXYNOS4X12_GPIO_PART1_BASE;
-	gpio2 = (struct exynos4x12_gpio_part2 *)EXYNOS4X12_GPIO_PART2_BASE;
+	gpio1 = (struct exynos4x12_gpio_part1 *)samsung_get_base_gpio_part1();
+	gpio2 = (struct exynos4x12_gpio_part2 *)samsung_get_base_gpio_part2();
 
 	/* I2C_7 */
 	err = exynos_pinmux_config(PERIPH_ID_I2C7, PINMUX_FLAG_NONE);
@@ -170,7 +173,7 @@ static int pmic_init_max77686(void);
 int board_init(void)
 {
 	struct exynos4_power *pwr =
-		(struct exynos4_power *)EXYNOS4X12_POWER_BASE;
+		(struct exynos4_power *)samsung_get_base_power();
 
 	gd->bd->bi_boot_params = PHYS_SDRAM_1 + 0x100;
 
@@ -277,7 +280,7 @@ int board_mmc_init(bd_t *bis)
 {
 	int err0, err2 = 0;
 
-	gpio2 = (struct exynos4x12_gpio_part2 *)EXYNOS4X12_GPIO_PART2_BASE;
+	gpio2 = (struct exynos4x12_gpio_part2 *)samsung_get_base_gpio_part2();
 
 	/* eMMC_EN: SD_0_CDn: GPK0[2] Output High */
 	s5p_gpio_direction_output(&gpio2->k0, 2, 1);
@@ -331,6 +334,95 @@ int board_mmc_init(bd_t *bis)
 	return err0 & err2;
 }
 
+#ifdef CONFIG_USB_GADGET
+static int s5pc210_phy_control(int on)
+{
+	int ret = 0;
+	unsigned int val;
+	struct pmic *p, *p_pmic, *p_muic;
+
+	p_pmic = pmic_get("MAX77686_PMIC");
+	if (!p_pmic)
+		return -ENODEV;
+
+	if (pmic_probe(p_pmic))
+		return -1;
+
+	p_muic = pmic_get("MAX77693_MUIC");
+	if (!p_muic)
+		return -ENODEV;
+
+	if (pmic_probe(p_muic))
+		return -1;
+
+	if (on) {
+		ret = max77686_set_ldo_mode(p_pmic, 12, OPMODE_ON);
+		if (ret)
+			return -1;
+
+		p = pmic_get("MAX77693_PMIC");
+		if (!p)
+			return -ENODEV;
+
+		if (pmic_probe(p))
+			return -1;
+
+		/* SAFEOUT */
+		ret = pmic_reg_read(p, MAX77693_SAFEOUT, &val);
+		if (ret)
+			return -1;
+
+		val |= MAX77693_ENSAFEOUT1;
+		ret = pmic_reg_write(p, MAX77693_SAFEOUT, val);
+		if (ret)
+			return -1;
+
+		/* PATH: USB */
+		ret = pmic_reg_write(p_muic, MAX77693_MUIC_CONTROL1,
+			MAX77693_MUIC_CTRL1_DN1DP2);
+
+	} else {
+		ret = max77686_set_ldo_mode(p_pmic, 12, OPMODE_LPM);
+		if (ret)
+			return -1;
+
+		/* PATH: UART */
+		ret = pmic_reg_write(p_muic, MAX77693_MUIC_CONTROL1,
+			MAX77693_MUIC_CTRL1_UT1UR2);
+	}
+
+	if (ret)
+		return -1;
+
+	return 0;
+}
+
+struct s3c_plat_otg_data s5pc210_otg_data = {
+	.phy_control	= s5pc210_phy_control,
+	.regs_phy	= EXYNOS4X12_USBPHY_BASE,
+	.regs_otg	= EXYNOS4X12_USBOTG_BASE,
+	.usb_phy_ctrl	= EXYNOS4X12_USBPHY_CONTROL,
+	.usb_flags	= PHY0_SLEEP,
+};
+
+int board_usb_init(int index, enum usb_init_type init)
+{
+	debug("USB_udc_probe\n");
+	return s3c_udc_probe(&s5pc210_otg_data);
+}
+
+#ifdef CONFIG_USB_CABLE_CHECK
+int usb_cable_connected(void)
+{
+	struct pmic *muic = pmic_get("MAX77693_MUIC");
+	if (!muic)
+		return 0;
+
+	return !!muic->chrg->chrg_type(muic);
+}
+#endif
+#endif
+
 static int pmic_init_max77686(void)
 {
 	struct pmic *p = pmic_get("MAX77686_PMIC");
@@ -444,7 +536,7 @@ void exynos_lcd_power_on(void)
 {
 	struct pmic *p = pmic_get("MAX77686_PMIC");
 
-	gpio1 = (struct exynos4x12_gpio_part1 *)EXYNOS4X12_GPIO_PART1_BASE;
+	gpio1 = (struct exynos4x12_gpio_part1 *)samsung_get_base_gpio_part1();
 
 	/* LCD_2.2V_EN: GPC0[1] */
 	s5p_gpio_set_pull(&gpio1->c0, 1, GPIO_PULL_UP);
@@ -458,7 +550,7 @@ void exynos_lcd_power_on(void)
 
 void exynos_reset_lcd(void)
 {
-	gpio1 = (struct exynos4x12_gpio_part1 *)EXYNOS4X12_GPIO_PART1_BASE;
+	gpio1 = (struct exynos4x12_gpio_part1 *)samsung_get_base_gpio_part1();
 
 	/* reset lcd */
 	s5p_gpio_direction_output(&gpio1->f2, 1, 0);
diff --git a/board/siemens/common/factoryset.c b/board/siemens/common/factoryset.c
index fbe79973e3..266dbbbb5f 100644
--- a/board/siemens/common/factoryset.c
+++ b/board/siemens/common/factoryset.c
@@ -15,7 +15,8 @@
 #include <asm/arch/sys_proto.h>
 #include <asm/unaligned.h>
 #include <net.h>
-#include <usbdescriptors.h>
+#include <errno.h>
+#include <g_dnl.h>
 #include "factoryset.h"
 
 #define EEPR_PG_SZ		0x80
@@ -224,8 +225,20 @@ int factoryset_read_eeprom(int i2c_addr)
 					MAX_STRING_LENGTH)) {
 		debug("display name: %s\n", factory_dat.disp_name);
 	}
-
 #endif
+	if (0 <= get_factory_record_val(cp, size, (uchar *)"DEV",
+					(uchar *)"num", factory_dat.serial,
+					MAX_STRING_LENGTH)) {
+		debug("serial number: %s\n", factory_dat.serial);
+	}
+	if (0 <= get_factory_record_val(cp, size, (uchar *)"DEV",
+					(uchar *)"ver", buf,
+					MAX_STRING_LENGTH)) {
+		factory_dat.version = simple_strtoul((char *)buf,
+							    NULL, 16);
+		debug("version number: %d\n", factory_dat.version);
+	}
+
 	return 0;
 
 err:
@@ -279,6 +292,13 @@ int g_dnl_bind_fixup(struct usb_device_descriptor *dev, const char *name)
 {
 	put_unaligned(factory_dat.usb_vendor_id, &dev->idVendor);
 	put_unaligned(factory_dat.usb_product_id, &dev->idProduct);
+	g_dnl_set_serialnumber((char *)factory_dat.serial);
+
 	return 0;
 }
+
+int g_dnl_get_board_bcd_device_number(int gcnum)
+{
+	return factory_dat.version;
+}
 #endif /* defined(CONFIG_SPL_BUILD) */
diff --git a/board/siemens/common/factoryset.h b/board/siemens/common/factoryset.h
index 445f3842da..4d6de10f52 100644
--- a/board/siemens/common/factoryset.h
+++ b/board/siemens/common/factoryset.h
@@ -18,6 +18,8 @@ struct factorysetcontainer {
 #if defined(CONFIG_VIDEO)
 	unsigned char disp_name[MAX_STRING_LENGTH];
 #endif
+	unsigned char serial[MAX_STRING_LENGTH];
+	int version;
 };
 
 int factoryset_read_eeprom(int i2c_addr);
diff --git a/board/siemens/corvus/Makefile b/board/siemens/corvus/Makefile
new file mode 100644
index 0000000000..f3ebf77f1b
--- /dev/null
+++ b/board/siemens/corvus/Makefile
@@ -0,0 +1,18 @@
+#
+# Makefile for siemens CORVUS (AT91SAM9G45) based board
+# (C) Copyright 2013 Siemens AG
+#
+# Based on:
+# U-Boot file: board/atmel/at91sam9m10g45ek/Makefile
+#
+# (C) Copyright 2003-2008
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# (C) Copyright 2008
+# Stelian Pop <stelian@popies.net>
+# Lead Tech Design <www.leadtechdesign.com>
+#
+# SPDX-License-Identifier:	GPL-2.0+
+#
+
+obj-y += board.o
diff --git a/board/siemens/corvus/board.c b/board/siemens/corvus/board.c
new file mode 100644
index 0000000000..f1e93ef063
--- /dev/null
+++ b/board/siemens/corvus/board.c
@@ -0,0 +1,195 @@
+/*
+ * Board functions for Siemens CORVUS (AT91SAM9G45) based board
+ * (C) Copyright 2013 Siemens AG
+ *
+ * Based on:
+ * U-Boot file: board/atmel/at91sam9m10g45ek/at91sam9m10g45ek.c
+ * (C) Copyright 2007-2008
+ * Stelian Pop <stelian@popies.net>
+ * Lead Tech Design <www.leadtechdesign.com>
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+
+#include <common.h>
+#include <asm/io.h>
+#include <asm/arch/at91sam9g45_matrix.h>
+#include <asm/arch/at91sam9_smc.h>
+#include <asm/arch/at91_common.h>
+#include <asm/arch/at91_pmc.h>
+#include <asm/arch/at91_rstc.h>
+#include <asm/arch/gpio.h>
+#include <asm/arch/clk.h>
+#include <lcd.h>
+#include <atmel_lcdc.h>
+#if defined(CONFIG_RESET_PHY_R) && defined(CONFIG_MACB)
+#include <net.h>
+#endif
+#include <netdev.h>
+#include <spi.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+#ifdef CONFIG_CMD_NAND
+static void corvus_nand_hw_init(void)
+{
+	struct at91_smc *smc = (struct at91_smc *)ATMEL_BASE_SMC;
+	struct at91_matrix *matrix = (struct at91_matrix *)ATMEL_BASE_MATRIX;
+	struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC;
+	unsigned long csa;
+
+	/* Enable CS3 */
+	csa = readl(&matrix->ebicsa);
+	csa |= AT91_MATRIX_EBI_CS3A_SMC_SMARTMEDIA;
+	writel(csa, &matrix->ebicsa);
+
+	/* Configure SMC CS3 for NAND/SmartMedia */
+	writel(AT91_SMC_SETUP_NWE(1) | AT91_SMC_SETUP_NCS_WR(0) |
+	       AT91_SMC_SETUP_NRD(1) | AT91_SMC_SETUP_NCS_RD(0),
+	       &smc->cs[3].setup);
+	writel(AT91_SMC_PULSE_NWE(4) | AT91_SMC_PULSE_NCS_WR(3) |
+	       AT91_SMC_PULSE_NRD(3) | AT91_SMC_PULSE_NCS_RD(2),
+	       &smc->cs[3].pulse);
+	writel(AT91_SMC_CYCLE_NWE(7) | AT91_SMC_CYCLE_NRD(4),
+	       &smc->cs[3].cycle);
+	writel(AT91_SMC_MODE_RM_NRD | AT91_SMC_MODE_WM_NWE |
+	       AT91_SMC_MODE_EXNW_DISABLE |
+#ifdef CONFIG_SYS_NAND_DBW_16
+	       AT91_SMC_MODE_DBW_16 |
+#else /* CONFIG_SYS_NAND_DBW_8 */
+	       AT91_SMC_MODE_DBW_8 |
+#endif
+	       AT91_SMC_MODE_TDF_CYCLE(3),
+	       &smc->cs[3].mode);
+
+	writel(1 << ATMEL_ID_PIOC, &pmc->pcer);
+
+	/* Configure RDY/BSY */
+	at91_set_gpio_input(CONFIG_SYS_NAND_READY_PIN, 1);
+
+	/* Enable NandFlash */
+	at91_set_gpio_output(CONFIG_SYS_NAND_ENABLE_PIN, 1);
+}
+#endif
+
+#ifdef CONFIG_CMD_USB
+static void taurus_usb_hw_init(void)
+{
+	struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC;
+
+	writel(1 << ATMEL_ID_PIODE, &pmc->pcer);
+
+	at91_set_gpio_output(AT91_PIN_PD1, 0);
+	at91_set_gpio_output(AT91_PIN_PD3, 0);
+}
+#endif
+
+#ifdef CONFIG_MACB
+static void corvus_macb_hw_init(void)
+{
+	struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC;
+
+	/* Enable clock */
+	writel(1 << ATMEL_ID_EMAC, &pmc->pcer);
+
+	/*
+	 * Disable pull-up on:
+	 *      RXDV (PA15) => PHY normal mode (not Test mode)
+	 *      ERX0 (PA12) => PHY ADDR0
+	 *      ERX1 (PA13) => PHY ADDR1 => PHYADDR = 0x0
+	 *
+	 * PHY has internal pull-down
+	 */
+	at91_set_pio_pullup(AT91_PIO_PORTA, 15, 0);
+	at91_set_pio_pullup(AT91_PIO_PORTA, 12, 0);
+	at91_set_pio_pullup(AT91_PIO_PORTA, 13, 0);
+
+	at91_phy_reset();
+
+	/* Re-enable pull-up */
+	at91_set_pio_pullup(AT91_PIO_PORTA, 15, 1);
+	at91_set_pio_pullup(AT91_PIO_PORTA, 12, 1);
+	at91_set_pio_pullup(AT91_PIO_PORTA, 13, 1);
+
+	/* And the pins. */
+	at91_macb_hw_init();
+}
+#endif
+
+int board_early_init_f(void)
+{
+	at91_seriald_hw_init();
+	return 0;
+}
+
+int board_init(void)
+{
+	/* address of boot parameters */
+	gd->bd->bi_boot_params = CONFIG_SYS_SDRAM_BASE + 0x100;
+
+#ifdef CONFIG_CMD_NAND
+	corvus_nand_hw_init();
+#endif
+#ifdef CONFIG_ATMEL_SPI
+	at91_spi0_hw_init(1 << 4);
+#endif
+#ifdef CONFIG_HAS_DATAFLASH
+	at91_spi0_hw_init(1 << 0);
+#endif
+#ifdef CONFIG_MACB
+	corvus_macb_hw_init();
+#endif
+#ifdef CONFIG_CMD_USB
+	taurus_usb_hw_init();
+#endif
+	return 0;
+}
+
+int dram_init(void)
+{
+	gd->ram_size = get_ram_size((void *)CONFIG_SYS_SDRAM_BASE,
+				    CONFIG_SYS_SDRAM_SIZE);
+	return 0;
+}
+
+int board_eth_init(bd_t *bis)
+{
+	int rc = 0;
+#ifdef CONFIG_MACB
+	rc = macb_eth_initialize(0, (void *)ATMEL_BASE_EMAC, 0x00);
+#endif
+	return rc;
+}
+
+/* SPI chip select control */
+int spi_cs_is_valid(unsigned int bus, unsigned int cs)
+{
+	return bus == 0 && cs < 2;
+}
+
+void spi_cs_activate(struct spi_slave *slave)
+{
+	switch (slave->cs) {
+	case 1:
+			at91_set_gpio_output(AT91_PIN_PB18, 0);
+			break;
+	case 0:
+	default:
+			at91_set_gpio_output(AT91_PIN_PB3, 0);
+			break;
+	}
+}
+
+void spi_cs_deactivate(struct spi_slave *slave)
+{
+	switch (slave->cs) {
+	case 1:
+			at91_set_gpio_output(AT91_PIN_PB18, 1);
+			break;
+	case 0:
+	default:
+			at91_set_gpio_output(AT91_PIN_PB3, 1);
+			break;
+	}
+}
diff --git a/board/siemens/dxr2/board.c b/board/siemens/dxr2/board.c
index af9d84f128..3a5e11dc81 100644
--- a/board/siemens/dxr2/board.c
+++ b/board/siemens/dxr2/board.c
@@ -38,11 +38,11 @@ DECLARE_GLOBAL_DATA_PTR;
 
 #ifdef CONFIG_SPL_BUILD
 static struct dxr2_baseboard_id __attribute__((section(".data"))) settings;
-
+/* @303MHz-i0 */
 const struct ddr3_data ddr3_default = {
-	0x33524444, 0x56312e33, 0x0100, 0x0001, 0x003A, 0x008A, 0x010B,
-	0x00C4, 0x0888A39B, 0x26247FDA, 0x501F821F, 0x0006, 0x61C04AB2,
-	0x00000618,
+	0x33524444, 0x56312e34, 0x0080, 0x0000, 0x0038, 0x003E, 0x00A4,
+	0x0075, 0x0888A39B, 0x26247FDA, 0x501F821F, 0x00100206, 0x61A44A32,
+	0x00000618, 0x0000014A,
 };
 
 static void set_default_ddr3_timings(void)
@@ -73,6 +73,7 @@ static void print_ddr3_timings(void)
 
 	PRINTARGS(sdram_config);
 	PRINTARGS(ref_ctrl);
+	PRINTARGS(ioctr_val);
 }
 
 static void print_chip_data(void)
@@ -139,13 +140,9 @@ struct emif_regs dxr2_ddr3_emif_reg_data = {
 };
 
 struct ddr_data dxr2_ddr3_data = {
-	.datadldiff0 = PHY_DLL_LOCK_DIFF,
 };
 
 struct cmd_control dxr2_ddr3_cmd_ctrl_data = {
-	.cmd0dldiff = 0,
-	.cmd1dldiff = 0,
-	.cmd2dldiff = 0,
 };
 	/* pass values from eeprom */
 	dxr2_ddr3_emif_reg_data.sdram_tim1 = settings.ddr3.sdram_tim1;
@@ -168,7 +165,7 @@ struct cmd_control dxr2_ddr3_cmd_ctrl_data = {
 	dxr2_ddr3_cmd_ctrl_data.cmd2csratio = settings.ddr3.ddr3_sratio;
 	dxr2_ddr3_cmd_ctrl_data.cmd2iclkout = settings.ddr3.iclkout;
 
-	config_ddr(DDR_PLL_FREQ, DXR2_IOCTRL_VAL, &dxr2_ddr3_data,
+	config_ddr(DDR_PLL_FREQ, settings.ddr3.ioctr_val, &dxr2_ddr3_data,
 		   &dxr2_ddr3_cmd_ctrl_data, &dxr2_ddr3_emif_reg_data, 0);
 }
 
diff --git a/board/siemens/dxr2/board.h b/board/siemens/dxr2/board.h
index 2be78fbab2..abf5432329 100644
--- a/board/siemens/dxr2/board.h
+++ b/board/siemens/dxr2/board.h
@@ -22,11 +22,11 @@
 #define MAGIC_CHIP	0x50494843
 
 /* Automatic generated definition */
-/* Wed, 19 Jun 2013 10:57:48 +0200 */
-/* From file: draco/ddr3-data-micron.txt */
+/* Wed, 18 Sep 2013 18:58:27 +0200 */
+/* From file: draco/ddr3-data-micron-v2.txt */
 struct ddr3_data {
 	unsigned int magic;			/* 0x33524444 */
-	unsigned int version;			/* 0x56312e33 */
+	unsigned int version;			/* 0x56312e34 */
 	unsigned short int ddr3_sratio;		/* 0x0100 */
 	unsigned short int iclkout;		/* 0x0001 */
 	unsigned short int dt0rdsratio0;	/* 0x003A */
@@ -36,9 +36,10 @@ struct ddr3_data {
 	unsigned int sdram_tim1;		/* 0x0888A39B */
 	unsigned int sdram_tim2;		/* 0x26247FDA */
 	unsigned int sdram_tim3;		/* 0x501F821F */
-	unsigned short int emif_ddr_phy_ctlr_1;	/* 0x0006 */
+	unsigned int emif_ddr_phy_ctlr_1;	/* 0x00100206 */
 	unsigned int sdram_config;		/* 0x61C04AB2 */
 	unsigned int ref_ctrl;			/* 0x00000618 */
+	unsigned int ioctr_val;			/* 0x0000018B */
 };
 
 struct chip_data {
diff --git a/board/siemens/dxr2/mux.c b/board/siemens/dxr2/mux.c
index bc80b79d7e..5c22999bb8 100644
--- a/board/siemens/dxr2/mux.c
+++ b/board/siemens/dxr2/mux.c
@@ -63,6 +63,164 @@ static struct module_pin_mux gpios_pin_mux[] = {
 	{OFFSET(gpmc_ad11), (MODE(7) | PULLUDEN | RXACTIVE)},
 	{OFFSET(gpmc_csn3), MODE(7) },			/* LED0 GPIO2_0 */
 	{OFFSET(emu0), MODE(7)},			/* LED1 GPIO3_7 */
+	/* Triacs in HW Rev 2 */
+	{OFFSET(uart1_ctsn), MODE(7) | PULLUDDIS | RXACTIVE},	/* Y5 GPIO0_12*/
+	{OFFSET(mmc0_dat1), MODE(7) | PULLUDDIS | RXACTIVE},	/* Y3 GPIO2_28*/
+	{OFFSET(mmc0_dat2), MODE(7) | PULLUDDIS | RXACTIVE},	/* Y7 GPIO2_27*/
+	/* Triacs initial HW Rev */
+	{OFFSET(gpmc_csn1), MODE(7) | RXACTIVE | PULLUDDIS},	/* 1_30 Y0 */
+	{OFFSET(gpmc_be1n), MODE(7) | RXACTIVE | PULLUDDIS},	/* 1_28 Y1 */
+	{OFFSET(gpmc_csn2), MODE(7) | RXACTIVE | PULLUDDIS},	/* 1_31 Y2 */
+	{OFFSET(lcd_data15), MODE(7) | RXACTIVE | PULLUDDIS},	/* 0_11 Y3 */
+	{OFFSET(lcd_data14), MODE(7) | RXACTIVE | PULLUDDIS},	/* 0_10 Y4 */
+	{OFFSET(gpmc_clk), MODE(7) | RXACTIVE | PULLUDDIS},	/* 2_1  Y5 */
+	{OFFSET(emu1), MODE(7) | RXACTIVE | PULLUDDIS},		/* 3_8  Y6 */
+	{OFFSET(gpmc_ad15), MODE(7) | RXACTIVE | PULLUDDIS},	/* 1_15 Y7 */
+	/* Remaining pins that were not used in this file */
+	{OFFSET(gpmc_ad8), MODE(7) | RXACTIVE | PULLUDDIS},
+	{OFFSET(gpmc_ad9), MODE(7) | RXACTIVE | PULLUDDIS},
+	{OFFSET(gpmc_a0), MODE(7) | RXACTIVE | PULLUDDIS},
+	{OFFSET(gpmc_a1), MODE(7) | RXACTIVE | PULLUDDIS},
+	{OFFSET(gpmc_a2), MODE(7) | RXACTIVE | PULLUDDIS},
+	{OFFSET(gpmc_a3), MODE(7) | RXACTIVE | PULLUDDIS},
+	{OFFSET(gpmc_a4), MODE(7) | RXACTIVE | PULLUDDIS},
+	{OFFSET(gpmc_a5), MODE(7) | RXACTIVE | PULLUDDIS},
+	{OFFSET(gpmc_a6), MODE(7) | RXACTIVE | PULLUDDIS},
+	{OFFSET(gpmc_a7), MODE(7) | RXACTIVE | PULLUDDIS},
+	{OFFSET(gpmc_a8), MODE(7) | RXACTIVE | PULLUDDIS},
+	{OFFSET(gpmc_a9), MODE(7) | RXACTIVE | PULLUDDIS},
+	{OFFSET(gpmc_a10), MODE(7) | RXACTIVE | PULLUDDIS},
+	{OFFSET(gpmc_a11), MODE(7) | RXACTIVE | PULLUDDIS},
+	{OFFSET(lcd_data0), MODE(7) | RXACTIVE | PULLUDDIS},
+	{OFFSET(lcd_data2), MODE(7) | RXACTIVE | PULLUDDIS},
+	{OFFSET(lcd_data3), MODE(7) | RXACTIVE | PULLUDDIS},
+	{OFFSET(lcd_data4), MODE(7) | RXACTIVE | PULLUDDIS},
+	{OFFSET(lcd_data5), MODE(7) | RXACTIVE | PULLUDDIS},
+	{OFFSET(lcd_data6), MODE(7) | RXACTIVE | PULLUDDIS},
+	{OFFSET(lcd_data7), MODE(7) | RXACTIVE | PULLUDDIS},
+	{OFFSET(lcd_data8), MODE(7) | RXACTIVE | PULLUDDIS},
+	{OFFSET(lcd_data9), MODE(7) | RXACTIVE | PULLUDDIS},
+	{OFFSET(lcd_vsync), MODE(7) | RXACTIVE | PULLUDDIS},
+	{OFFSET(lcd_hsync), MODE(7) | RXACTIVE | PULLUDDIS},
+	{OFFSET(lcd_pclk), MODE(7) | RXACTIVE | PULLUDDIS},
+	{OFFSET(lcd_ac_bias_en), MODE(7) | RXACTIVE | PULLUDDIS},
+	{OFFSET(mmc0_dat3), MODE(7) | RXACTIVE | PULLUDDIS},
+	{OFFSET(mmc0_dat0), MODE(7) | RXACTIVE | PULLUDDIS},
+	{OFFSET(mmc0_clk), MODE(7) | RXACTIVE | PULLUDDIS},
+	{OFFSET(mmc0_cmd), MODE(7) | RXACTIVE | PULLUDDIS},
+	{OFFSET(spi0_sclk), MODE(7) | RXACTIVE | PULLUDDIS},
+	{OFFSET(spi0_d0), MODE(7) | RXACTIVE | PULLUDDIS},
+	{OFFSET(spi0_d1), MODE(7) | RXACTIVE | PULLUDDIS},
+	{OFFSET(spi0_cs0), MODE(7) | RXACTIVE | PULLUDDIS},
+	{OFFSET(uart0_ctsn), MODE(7) | RXACTIVE | PULLUDDIS},
+	{OFFSET(uart0_rtsn), MODE(7) | RXACTIVE | PULLUDDIS},
+	{OFFSET(uart1_rtsn), MODE(7) | RXACTIVE | PULLUDDIS},
+	{OFFSET(uart1_rxd), MODE(7) | RXACTIVE | PULLUDDIS},
+	{OFFSET(uart1_txd), MODE(7) | RXACTIVE | PULLUDDIS},
+	{OFFSET(mcasp0_aclkx), MODE(7) | RXACTIVE | PULLUDDIS},
+	{OFFSET(mcasp0_fsx), MODE(7) | RXACTIVE | PULLUDDIS},
+	{OFFSET(mcasp0_axr0), MODE(7) | RXACTIVE | PULLUDDIS},
+	{OFFSET(mcasp0_ahclkr), MODE(7) | RXACTIVE | PULLUDDIS},
+	{OFFSET(mcasp0_aclkr), MODE(7) | RXACTIVE | PULLUDDIS},
+	{OFFSET(mcasp0_fsr), MODE(7) | RXACTIVE | PULLUDDIS},
+	{OFFSET(mcasp0_axr1), MODE(7) | RXACTIVE | PULLUDDIS},
+	{OFFSET(mcasp0_ahclkx), MODE(7) | RXACTIVE | PULLUDDIS},
+	{OFFSET(xdma_event_intr0), MODE(7) | RXACTIVE | PULLUDDIS},
+	{OFFSET(xdma_event_intr1), MODE(7) | RXACTIVE | PULLUDDIS},
+	{OFFSET(nresetin_out), MODE(7) | RXACTIVE | PULLUDDIS},
+	{OFFSET(porz), MODE(7) | RXACTIVE | PULLUDDIS},
+	{OFFSET(nnmi), MODE(7) | RXACTIVE | PULLUDDIS},
+	{OFFSET(osc0_in), MODE(7) | RXACTIVE | PULLUDDIS},
+	{OFFSET(osc0_out), MODE(7) | RXACTIVE | PULLUDDIS},
+	{OFFSET(rsvd1), MODE(7) | RXACTIVE | PULLUDDIS},
+	{OFFSET(tms), MODE(7) | RXACTIVE | PULLUDDIS},
+	{OFFSET(tdi), MODE(7) | RXACTIVE | PULLUDDIS},
+	{OFFSET(tdo), MODE(7) | RXACTIVE | PULLUDDIS},
+	{OFFSET(tck), MODE(7) | RXACTIVE | PULLUDDIS},
+	{OFFSET(ntrst), MODE(7) | RXACTIVE | PULLUDDIS},
+	{OFFSET(osc1_in), MODE(7) | RXACTIVE | PULLUDDIS},
+	{OFFSET(osc1_out), MODE(7) | RXACTIVE | PULLUDDIS},
+	{OFFSET(pmic_power_en), MODE(7) | RXACTIVE | PULLUDDIS},
+	{OFFSET(rtc_porz), MODE(7) | RXACTIVE | PULLUDDIS},
+	{OFFSET(rsvd2), MODE(7) | RXACTIVE | PULLUDDIS},
+	{OFFSET(ext_wakeup), MODE(7) | RXACTIVE | PULLUDDIS},
+	{OFFSET(enz_kaldo_1p8v), MODE(7) | RXACTIVE | PULLUDDIS},
+	{OFFSET(usb0_dm), MODE(7) | RXACTIVE | PULLUDDIS},
+	{OFFSET(usb0_dp), MODE(7) | RXACTIVE | PULLUDDIS},
+	{OFFSET(usb0_ce), MODE(7) | RXACTIVE | PULLUDDIS},
+	{OFFSET(usb0_id), MODE(7) | RXACTIVE | PULLUDDIS},
+	{OFFSET(usb0_vbus), MODE(7) | RXACTIVE | PULLUDDIS},
+	{OFFSET(usb0_drvvbus), MODE(7) | RXACTIVE | PULLUDDIS},
+	{OFFSET(usb1_dm), MODE(7) | RXACTIVE | PULLUDDIS},
+	{OFFSET(usb1_dp), MODE(7) | RXACTIVE | PULLUDDIS},
+	{OFFSET(usb1_ce), MODE(7) | RXACTIVE | PULLUDDIS},
+	{OFFSET(usb1_id), MODE(7) | RXACTIVE | PULLUDDIS},
+	{OFFSET(usb1_vbus), MODE(7) | RXACTIVE | PULLUDDIS},
+	{OFFSET(usb1_drvvbus), MODE(7) | RXACTIVE | PULLUDDIS},
+	{OFFSET(ddr_resetn), MODE(7) | RXACTIVE | PULLUDDIS},
+	{OFFSET(ddr_csn0), MODE(7) | RXACTIVE | PULLUDDIS},
+	{OFFSET(ddr_cke), MODE(7) | RXACTIVE | PULLUDDIS},
+	{OFFSET(ddr_ck), MODE(7) | RXACTIVE | PULLUDDIS},
+	{OFFSET(ddr_nck), MODE(7) | RXACTIVE | PULLUDDIS},
+	{OFFSET(ddr_casn), MODE(7) | RXACTIVE | PULLUDDIS},
+	{OFFSET(ddr_rasn), MODE(7) | RXACTIVE | PULLUDDIS},
+	{OFFSET(ddr_wen), MODE(7) | RXACTIVE | PULLUDDIS},
+	{OFFSET(ddr_ba0), MODE(7) | RXACTIVE | PULLUDDIS},
+	{OFFSET(ddr_ba1), MODE(7) | RXACTIVE | PULLUDDIS},
+	{OFFSET(ddr_ba2), MODE(7) | RXACTIVE | PULLUDDIS},
+	{OFFSET(ddr_a0), MODE(7) | RXACTIVE | PULLUDDIS},
+	{OFFSET(ddr_a1), MODE(7) | RXACTIVE | PULLUDDIS},
+	{OFFSET(ddr_a2), MODE(7) | RXACTIVE | PULLUDDIS},
+	{OFFSET(ddr_a3), MODE(7) | RXACTIVE | PULLUDDIS},
+	{OFFSET(ddr_a4), MODE(7) | RXACTIVE | PULLUDDIS},
+	{OFFSET(ddr_a5), MODE(7) | RXACTIVE | PULLUDDIS},
+	{OFFSET(ddr_a6), MODE(7) | RXACTIVE | PULLUDDIS},
+	{OFFSET(ddr_a7), MODE(7) | RXACTIVE | PULLUDDIS},
+	{OFFSET(ddr_a8), MODE(7) | RXACTIVE | PULLUDDIS},
+	{OFFSET(ddr_a9), MODE(7) | RXACTIVE | PULLUDDIS},
+	{OFFSET(ddr_a10), MODE(7) | RXACTIVE | PULLUDDIS},
+	{OFFSET(ddr_a11), MODE(7) | RXACTIVE | PULLUDDIS},
+	{OFFSET(ddr_a12), MODE(7) | RXACTIVE | PULLUDDIS},
+	{OFFSET(ddr_a13), MODE(7) | RXACTIVE | PULLUDDIS},
+	{OFFSET(ddr_a14), MODE(7) | RXACTIVE | PULLUDDIS},
+	{OFFSET(ddr_a15), MODE(7) | RXACTIVE | PULLUDDIS},
+	{OFFSET(ddr_odt), MODE(7) | RXACTIVE | PULLUDDIS},
+	{OFFSET(ddr_d0), MODE(7) | RXACTIVE | PULLUDDIS},
+	{OFFSET(ddr_d1), MODE(7) | RXACTIVE | PULLUDDIS},
+	{OFFSET(ddr_d2), MODE(7) | RXACTIVE | PULLUDDIS},
+	{OFFSET(ddr_d3), MODE(7) | RXACTIVE | PULLUDDIS},
+	{OFFSET(ddr_d4), MODE(7) | RXACTIVE | PULLUDDIS},
+	{OFFSET(ddr_d5), MODE(7) | RXACTIVE | PULLUDDIS},
+	{OFFSET(ddr_d6), MODE(7) | RXACTIVE | PULLUDDIS},
+	{OFFSET(ddr_d7), MODE(7) | RXACTIVE | PULLUDDIS},
+	{OFFSET(ddr_d8), MODE(7) | RXACTIVE | PULLUDDIS},
+	{OFFSET(ddr_d9), MODE(7) | RXACTIVE | PULLUDDIS},
+	{OFFSET(ddr_d10), MODE(7) | RXACTIVE | PULLUDDIS},
+	{OFFSET(ddr_d11), MODE(7) | RXACTIVE | PULLUDDIS},
+	{OFFSET(ddr_d12), MODE(7) | RXACTIVE | PULLUDDIS},
+	{OFFSET(ddr_d13), MODE(7) | RXACTIVE | PULLUDDIS},
+	{OFFSET(ddr_d14), MODE(7) | RXACTIVE | PULLUDDIS},
+	{OFFSET(ddr_d15), MODE(7) | RXACTIVE | PULLUDDIS},
+	{OFFSET(ddr_dqm0), MODE(7) | RXACTIVE | PULLUDDIS},
+	{OFFSET(ddr_dqm1), MODE(7) | RXACTIVE | PULLUDDIS},
+	{OFFSET(ddr_dqs0), MODE(7) | RXACTIVE | PULLUDDIS},
+	{OFFSET(ddr_dqsn0), MODE(7) | RXACTIVE | PULLUDDIS},
+	{OFFSET(ddr_dqs1), MODE(7) | RXACTIVE | PULLUDDIS},
+	{OFFSET(ddr_dqsn1), MODE(7) | RXACTIVE | PULLUDDIS},
+	{OFFSET(ddr_vref), MODE(7) | RXACTIVE | PULLUDDIS},
+	{OFFSET(ddr_vtp), MODE(7) | RXACTIVE | PULLUDDIS},
+	{OFFSET(ddr_strben0), MODE(7) | RXACTIVE | PULLUDDIS},
+	{OFFSET(ddr_strben1), MODE(7) | RXACTIVE | PULLUDDIS},
+	{OFFSET(ain7), MODE(7) | RXACTIVE | PULLUDDIS},
+	{OFFSET(ain6), MODE(7) | RXACTIVE | PULLUDDIS},
+	{OFFSET(ain5), MODE(7) | RXACTIVE | PULLUDDIS},
+	{OFFSET(ain4), MODE(7) | RXACTIVE | PULLUDDIS},
+	{OFFSET(ain3), MODE(7) | RXACTIVE | PULLUDDIS},
+	{OFFSET(ain2), MODE(7) | RXACTIVE | PULLUDDIS},
+	{OFFSET(ain1), MODE(7) | RXACTIVE | PULLUDDIS},
+	{OFFSET(ain0), MODE(7) | RXACTIVE | PULLUDDIS},
+	{OFFSET(vrefp), MODE(7) | RXACTIVE | PULLUDDIS},
+	{OFFSET(vrefn), MODE(7) | RXACTIVE | PULLUDDIS},
 	{-1},
 };
 
diff --git a/board/siemens/pxm2/board.c b/board/siemens/pxm2/board.c
index 2c1841f8ae..0a25b4b40c 100644
--- a/board/siemens/pxm2/board.c
+++ b/board/siemens/pxm2/board.c
@@ -58,19 +58,14 @@ struct ddr_data pxm2_ddr3_data = {
 	.datawdsratio0 = 0,
 	.datafwsratio0 = 0x8020080,
 	.datawrsratio0 = 0x4010040,
-	.datauserank0delay = 1,
-	.datadldiff0 = PHY_DLL_LOCK_DIFF,
 };
 
 struct cmd_control pxm2_ddr3_cmd_ctrl_data = {
 	.cmd0csratio = 0x80,
-	.cmd0dldiff = 0,
 	.cmd0iclkout = 0,
 	.cmd1csratio = 0x80,
-	.cmd1dldiff = 0,
 	.cmd1iclkout = 0,
 	.cmd2csratio = 0x80,
-	.cmd2dldiff = 0,
 	.cmd2iclkout = 0,
 };
 
@@ -413,8 +408,7 @@ static int conf_disp_pll(int m, int n)
 
 static int board_video_init(void)
 {
-	/* set 300 MHz */
-	conf_disp_pll(25, 2);
+	conf_disp_pll(24, 1);
 	if (factory_dat.pxm50)
 		da8xx_video_init(&lcd_panels[0], &lcd_cfg, lcd_cfg.bpp);
 	else
diff --git a/board/siemens/rut/board.c b/board/siemens/rut/board.c
index 5de8fc6cbf..77592dbba8 100644
--- a/board/siemens/rut/board.c
+++ b/board/siemens/rut/board.c
@@ -63,19 +63,14 @@ struct ddr_data rut_ddr3_data = {
 	.datawdsratio0 = 0x85,
 	.datafwsratio0 = 0x100,
 	.datawrsratio0 = 0xc1,
-	.datauserank0delay = 1,
-	.datadldiff0 = PHY_DLL_LOCK_DIFF,
 };
 
 struct cmd_control rut_ddr3_cmd_ctrl_data = {
 	.cmd0csratio = 0x40,
-	.cmd0dldiff = 0,
 	.cmd0iclkout = 1,
 	.cmd1csratio = 0x40,
-	.cmd1dldiff = 0,
 	.cmd1iclkout = 1,
 	.cmd2csratio = 0x40,
-	.cmd2dldiff = 0,
 	.cmd2iclkout = 1,
 };
 
@@ -83,9 +78,48 @@ struct cmd_control rut_ddr3_cmd_ctrl_data = {
 		   &rut_ddr3_cmd_ctrl_data, &rut_ddr3_emif_reg_data, 0);
 }
 
+static int request_and_pulse_reset(int gpio, const char *name)
+{
+	int ret;
+	const int delay_us = 2000; /* 2ms */
+
+	ret = gpio_request(gpio, name);
+	if (ret < 0) {
+		printf("%s: Unable to request %s\n", __func__, name);
+		goto err;
+	}
+
+	ret = gpio_direction_output(gpio, 0);
+	if (ret < 0) {
+		printf("%s: Unable to set %s  as output\n", __func__, name);
+		goto err_free_gpio;
+	}
+
+	udelay(delay_us);
+
+	gpio_set_value(gpio, 1);
+
+	return 0;
+
+err_free_gpio:
+	gpio_free(gpio);
+err:
+	return ret;
+}
+
+#define GPIO_TO_PIN(bank, gpio)		(32 * (bank) + (gpio))
+#define ETH_PHY_RESET_GPIO		GPIO_TO_PIN(2, 18)
+#define MAXTOUCH_RESET_GPIO		GPIO_TO_PIN(3, 18)
+#define DISPLAY_RESET_GPIO		GPIO_TO_PIN(3, 19)
+
+#define REQUEST_AND_PULSE_RESET(N) \
+		request_and_pulse_reset(N, #N);
+
 static void spl_siemens_board_init(void)
 {
-	return;
+	REQUEST_AND_PULSE_RESET(ETH_PHY_RESET_GPIO);
+	REQUEST_AND_PULSE_RESET(MAXTOUCH_RESET_GPIO);
+	REQUEST_AND_PULSE_RESET(DISPLAY_RESET_GPIO);
 }
 #endif /* if def CONFIG_SPL_BUILD */
 
@@ -336,7 +370,6 @@ int clk_get(int clk)
 static int conf_disp_pll(int m, int n)
 {
 	struct cm_perpll *cmper = (struct cm_perpll *)CM_PER;
-	struct cm_dpll *cmdpll = (struct cm_dpll *)CM_DPLL;
 	struct dpll_params dpll_lcd = {m, n, -1, -1, -1, -1, -1};
 #if defined(DISPL_PLL_SPREAD_SPECTRUM)
 	struct cm_wkuppll *cmwkup = (struct cm_wkuppll *)CM_WKUP;
@@ -353,8 +386,6 @@ static int conf_disp_pll(int m, int n)
 		0
 	};
 	do_enable_clocks(clk_domains, clk_modules_explicit_en, 1);
-	/* 0x44e0_0500 write lcdc pixel clock mux Linux hat hier 0 */
-	writel(0x0, &cmdpll->clklcdcpixelclk);
 
 	do_setup_dpll(&dpll_lcd_regs, &dpll_lcd);
 
@@ -380,10 +411,13 @@ static int enable_lcd(void)
 {
 	unsigned char buf[1];
 
+	set_gpio(BOARD_LCD_RESET, 0);
+	mdelay(1);
 	set_gpio(BOARD_LCD_RESET, 1);
+	mdelay(1);
 
 	/* spi lcd init */
-	kwh043st20_f01_spi_startup(1, 0, 5000000, SPI_MODE_3);
+	kwh043st20_f01_spi_startup(1, 0, 5000000, SPI_MODE_0);
 
 	/* backlight on */
 	buf[0] = 0xf;
@@ -418,7 +452,7 @@ static int board_video_init(void)
 		printf("%s: %s not found, using default %s\n", __func__,
 		       factory_dat.disp_name, lcd_panels[i].name);
 	}
-	conf_disp_pll(25, 2);
+	conf_disp_pll(24, 1);
 	da8xx_video_init(&lcd_panels[display], &lcd_cfgs[display],
 			 lcd_cfgs[display].bpp);
 
diff --git a/board/siemens/taurus/Makefile b/board/siemens/taurus/Makefile
new file mode 100644
index 0000000000..a26fb92147
--- /dev/null
+++ b/board/siemens/taurus/Makefile
@@ -0,0 +1,18 @@
+#
+# Makefile for Siemens TAURUS (AT91SAM9G20) based board
+# (C) Copyright 2013 Siemens AG
+#
+# Based on:
+# U-Boot file: board/atmel/at91sam9260ek/Makefile
+#
+# (C) Copyright 2003-2008
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# (C) Copyright 2008
+# Stelian Pop <stelian@popies.net>
+# Lead Tech Design <www.leadtechdesign.com>
+#
+# SPDX-License-Identifier:	GPL-2.0+
+#
+
+obj-y	+= taurus.o
diff --git a/board/siemens/taurus/taurus.c b/board/siemens/taurus/taurus.c
new file mode 100644
index 0000000000..673b3029a6
--- /dev/null
+++ b/board/siemens/taurus/taurus.c
@@ -0,0 +1,160 @@
+/*
+ * Board functions for Siemens TAURUS (AT91SAM9G20) based boards
+ * (C) Copyright Siemens AG
+ *
+ * Based on:
+ * U-Boot file: board/atmel/at91sam9260ek/at91sam9260ek.c
+ *
+ * (C) Copyright 2007-2008
+ * Stelian Pop <stelian@popies.net>
+ * Lead Tech Design <www.leadtechdesign.com>
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <asm/arch/at91sam9260_matrix.h>
+#include <asm/arch/at91sam9_smc.h>
+#include <asm/arch/at91_common.h>
+#include <asm/arch/at91_pmc.h>
+#include <asm/arch/at91_rstc.h>
+#include <asm/arch/gpio.h>
+#include <asm/arch/at91sam9_sdramc.h>
+#include <atmel_mci.h>
+
+#include <net.h>
+#include <netdev.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+#ifdef CONFIG_CMD_NAND
+static void taurus_nand_hw_init(void)
+{
+	struct at91_smc *smc = (struct at91_smc *)ATMEL_BASE_SMC;
+	struct at91_matrix *matrix = (struct at91_matrix *)ATMEL_BASE_MATRIX;
+	unsigned long csa;
+
+	/* Assign CS3 to NAND/SmartMedia Interface */
+	csa = readl(&matrix->ebicsa);
+	csa |= AT91_MATRIX_CS3A_SMC_SMARTMEDIA;
+	writel(csa, &matrix->ebicsa);
+
+	/* Configure SMC CS3 for NAND/SmartMedia */
+	writel(AT91_SMC_SETUP_NWE(2) | AT91_SMC_SETUP_NCS_WR(0) |
+	       AT91_SMC_SETUP_NRD(2) | AT91_SMC_SETUP_NCS_RD(0),
+	       &smc->cs[3].setup);
+	writel(AT91_SMC_PULSE_NWE(4) | AT91_SMC_PULSE_NCS_WR(3) |
+	       AT91_SMC_PULSE_NRD(4) | AT91_SMC_PULSE_NCS_RD(3),
+	       &smc->cs[3].pulse);
+	writel(AT91_SMC_CYCLE_NWE(7) | AT91_SMC_CYCLE_NRD(7),
+	       &smc->cs[3].cycle);
+	writel(AT91_SMC_MODE_RM_NRD | AT91_SMC_MODE_WM_NWE |
+	       AT91_SMC_MODE_EXNW_DISABLE |
+	       AT91_SMC_MODE_DBW_8 |
+	       AT91_SMC_MODE_TDF_CYCLE(3),
+	       &smc->cs[3].mode);
+
+	/* Configure RDY/BSY */
+	at91_set_gpio_input(CONFIG_SYS_NAND_READY_PIN, 1);
+
+	/* Enable NandFlash */
+	at91_set_gpio_output(CONFIG_SYS_NAND_ENABLE_PIN, 1);
+}
+#endif
+
+#ifdef CONFIG_MACB
+static void taurus_macb_hw_init(void)
+{
+	struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC;
+
+	/* Enable EMAC clock */
+	writel(1 << ATMEL_ID_EMAC0, &pmc->pcer);
+
+	/*
+	 * Disable pull-up on:
+	 *	RXDV (PA17) => PHY normal mode (not Test mode)
+	 *	ERX0 (PA14) => PHY ADDR0
+	 *	ERX1 (PA15) => PHY ADDR1
+	 *	ERX2 (PA25) => PHY ADDR2
+	 *	ERX3 (PA26) => PHY ADDR3
+	 *	ECRS (PA28) => PHY ADDR4  => PHYADDR = 0x0
+	 *
+	 * PHY has internal pull-down
+	 */
+	at91_set_pio_pullup(AT91_PIO_PORTA, 14, 0);
+	at91_set_pio_pullup(AT91_PIO_PORTA, 15, 0);
+	at91_set_pio_pullup(AT91_PIO_PORTA, 17, 0);
+	at91_set_pio_pullup(AT91_PIO_PORTA, 25, 0);
+	at91_set_pio_pullup(AT91_PIO_PORTA, 26, 0);
+	at91_set_pio_pullup(AT91_PIO_PORTA, 28, 0);
+
+	at91_phy_reset();
+
+	at91_set_gpio_input(AT91_PIN_PA25, 1);   /* ERST tri-state */
+
+	/* Re-enable pull-up */
+	at91_set_pio_pullup(AT91_PIO_PORTA, 14, 1);
+	at91_set_pio_pullup(AT91_PIO_PORTA, 15, 1);
+	at91_set_pio_pullup(AT91_PIO_PORTA, 17, 1);
+	at91_set_pio_pullup(AT91_PIO_PORTA, 25, 1);
+	at91_set_pio_pullup(AT91_PIO_PORTA, 26, 1);
+	at91_set_pio_pullup(AT91_PIO_PORTA, 28, 1);
+
+	/* Initialize EMAC=MACB hardware */
+	at91_macb_hw_init();
+}
+#endif
+
+#ifdef CONFIG_GENERIC_ATMEL_MCI
+int board_mmc_init(bd_t *bd)
+{
+	at91_mci_hw_init();
+
+	return atmel_mci_init((void *)ATMEL_BASE_MCI);
+}
+#endif
+
+int board_early_init_f(void)
+{
+	struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC;
+
+	/* Enable clocks for all PIOs */
+	writel((1 << ATMEL_ID_PIOA) | (1 << ATMEL_ID_PIOB) |
+		(1 << ATMEL_ID_PIOC),
+		&pmc->pcer);
+
+	return 0;
+}
+
+int board_init(void)
+{
+	/* adress of boot parameters */
+	gd->bd->bi_boot_params = CONFIG_SYS_SDRAM_BASE + 0x100;
+
+	at91_seriald_hw_init();
+#ifdef CONFIG_CMD_NAND
+	taurus_nand_hw_init();
+#endif
+#ifdef CONFIG_MACB
+	taurus_macb_hw_init();
+#endif
+
+	return 0;
+}
+
+int dram_init(void)
+{
+	gd->ram_size = get_ram_size((void *)CONFIG_SYS_SDRAM_BASE,
+				    CONFIG_SYS_SDRAM_SIZE);
+	return 0;
+}
+
+int board_eth_init(bd_t *bis)
+{
+	int rc = 0;
+#ifdef CONFIG_MACB
+	rc = macb_eth_initialize(0, (void *)ATMEL_BASE_EMAC0, 0x00);
+#endif
+	return rc;
+}
diff --git a/board/taskit/stamp9g20/stamp9g20.c b/board/taskit/stamp9g20/stamp9g20.c
index 704a63bad8..27cdf77f01 100644
--- a/board/taskit/stamp9g20/stamp9g20.c
+++ b/board/taskit/stamp9g20/stamp9g20.c
@@ -19,7 +19,6 @@
 #include <asm/arch/at91sam9_smc.h>
 #include <asm/arch/at91_common.h>
 #include <asm/arch/at91_pmc.h>
-#include <asm/arch/at91_rstc.h>
 #include <asm/arch/gpio.h>
 #include <watchdog.h>
 
@@ -67,8 +66,6 @@ static void stamp9G20_nand_hw_init(void)
 static void stamp9G20_macb_hw_init(void)
 {
 	struct at91_port *pioa = (struct at91_port *)ATMEL_BASE_PIOA;
-	struct at91_rstc *rstc = (struct at91_rstc *)ATMEL_BASE_RSTC;
-	unsigned long erstl;
 
 	/* Enable the PHY Chip via PA26 on the Stamp 2 Adaptor */
 	at91_set_gpio_output(AT91_PIN_PA26, 0);
@@ -91,33 +88,7 @@ static void stamp9G20_macb_hw_init(void)
 		pin_to_mask(AT91_PIN_PA28),
 		&pioa->pudr);
 
-	erstl = readl(&rstc->mr) & AT91_RSTC_MR_ERSTL_MASK;
-
-	/* Need to reset PHY -> 500ms reset */
-	writel(AT91_RSTC_KEY | (AT91_RSTC_MR_ERSTL(13) &
-				~AT91_RSTC_MR_URSTEN), &rstc->mr);
-	writel(AT91_RSTC_KEY | AT91_RSTC_CR_EXTRST, &rstc->cr);
-
-	/* Wait for end of hardware reset */
-	unsigned long start = get_timer(0);
-	unsigned long timeout = 1000; /* 1000ms */
-
-	while (!(readl(&rstc->sr) & AT91_RSTC_SR_NRSTL)) {
-
-		/* avoid shutdown by watchdog */
-		WATCHDOG_RESET();
-		mdelay(10);
-
-		/* timeout for not getting stuck in an endless loop */
-		if (get_timer(start) >= timeout) {
-			puts("*** ERROR: Timeout waiting for PHY reset!\n");
-			break;
-		};
-	};
-
-	/* Restore NRST value */
-	writel(AT91_RSTC_KEY | erstl | AT91_RSTC_MR_URSTEN,
-		&rstc->mr);
+	at91_phy_reset();
 
 	/* Re-enable pull-up */
 	writel(pin_to_mask(AT91_PIN_PA14) |
diff --git a/board/ti/am335x/board.c b/board/ti/am335x/board.c
index db225ce1d9..33693e4ead 100644
--- a/board/ti/am335x/board.c
+++ b/board/ti/am335x/board.c
@@ -107,21 +107,16 @@ static const struct ddr_data ddr2_data = {
 			  (MT47H128M16RT25E_PHY_WR_DATA<<20) |
 			  (MT47H128M16RT25E_PHY_WR_DATA<<10) |
 			  (MT47H128M16RT25E_PHY_WR_DATA<<0)),
-	.datauserank0delay = MT47H128M16RT25E_PHY_RANK0_DELAY,
-	.datadldiff0 = PHY_DLL_LOCK_DIFF,
 };
 
 static const struct cmd_control ddr2_cmd_ctrl_data = {
 	.cmd0csratio = MT47H128M16RT25E_RATIO,
-	.cmd0dldiff = MT47H128M16RT25E_DLL_LOCK_DIFF,
 	.cmd0iclkout = MT47H128M16RT25E_INVERT_CLKOUT,
 
 	.cmd1csratio = MT47H128M16RT25E_RATIO,
-	.cmd1dldiff = MT47H128M16RT25E_DLL_LOCK_DIFF,
 	.cmd1iclkout = MT47H128M16RT25E_INVERT_CLKOUT,
 
 	.cmd2csratio = MT47H128M16RT25E_RATIO,
-	.cmd2dldiff = MT47H128M16RT25E_DLL_LOCK_DIFF,
 	.cmd2iclkout = MT47H128M16RT25E_INVERT_CLKOUT,
 };
 
@@ -139,7 +134,6 @@ static const struct ddr_data ddr3_data = {
 	.datawdsratio0 = MT41J128MJT125_WR_DQS,
 	.datafwsratio0 = MT41J128MJT125_PHY_FIFO_WE,
 	.datawrsratio0 = MT41J128MJT125_PHY_WR_DATA,
-	.datadldiff0 = PHY_DLL_LOCK_DIFF,
 };
 
 static const struct ddr_data ddr3_beagleblack_data = {
@@ -147,7 +141,6 @@ static const struct ddr_data ddr3_beagleblack_data = {
 	.datawdsratio0 = MT41K256M16HA125E_WR_DQS,
 	.datafwsratio0 = MT41K256M16HA125E_PHY_FIFO_WE,
 	.datawrsratio0 = MT41K256M16HA125E_PHY_WR_DATA,
-	.datadldiff0 = PHY_DLL_LOCK_DIFF,
 };
 
 static const struct ddr_data ddr3_evm_data = {
@@ -155,48 +148,38 @@ static const struct ddr_data ddr3_evm_data = {
 	.datawdsratio0 = MT41J512M8RH125_WR_DQS,
 	.datafwsratio0 = MT41J512M8RH125_PHY_FIFO_WE,
 	.datawrsratio0 = MT41J512M8RH125_PHY_WR_DATA,
-	.datadldiff0 = PHY_DLL_LOCK_DIFF,
 };
 
 static const struct cmd_control ddr3_cmd_ctrl_data = {
 	.cmd0csratio = MT41J128MJT125_RATIO,
-	.cmd0dldiff = MT41J128MJT125_DLL_LOCK_DIFF,
 	.cmd0iclkout = MT41J128MJT125_INVERT_CLKOUT,
 
 	.cmd1csratio = MT41J128MJT125_RATIO,
-	.cmd1dldiff = MT41J128MJT125_DLL_LOCK_DIFF,
 	.cmd1iclkout = MT41J128MJT125_INVERT_CLKOUT,
 
 	.cmd2csratio = MT41J128MJT125_RATIO,
-	.cmd2dldiff = MT41J128MJT125_DLL_LOCK_DIFF,
 	.cmd2iclkout = MT41J128MJT125_INVERT_CLKOUT,
 };
 
 static const struct cmd_control ddr3_beagleblack_cmd_ctrl_data = {
 	.cmd0csratio = MT41K256M16HA125E_RATIO,
-	.cmd0dldiff = MT41K256M16HA125E_DLL_LOCK_DIFF,
 	.cmd0iclkout = MT41K256M16HA125E_INVERT_CLKOUT,
 
 	.cmd1csratio = MT41K256M16HA125E_RATIO,
-	.cmd1dldiff = MT41K256M16HA125E_DLL_LOCK_DIFF,
 	.cmd1iclkout = MT41K256M16HA125E_INVERT_CLKOUT,
 
 	.cmd2csratio = MT41K256M16HA125E_RATIO,
-	.cmd2dldiff = MT41K256M16HA125E_DLL_LOCK_DIFF,
 	.cmd2iclkout = MT41K256M16HA125E_INVERT_CLKOUT,
 };
 
 static const struct cmd_control ddr3_evm_cmd_ctrl_data = {
 	.cmd0csratio = MT41J512M8RH125_RATIO,
-	.cmd0dldiff = MT41J512M8RH125_DLL_LOCK_DIFF,
 	.cmd0iclkout = MT41J512M8RH125_INVERT_CLKOUT,
 
 	.cmd1csratio = MT41J512M8RH125_RATIO,
-	.cmd1dldiff = MT41J512M8RH125_DLL_LOCK_DIFF,
 	.cmd1iclkout = MT41J512M8RH125_INVERT_CLKOUT,
 
 	.cmd2csratio = MT41J512M8RH125_RATIO,
-	.cmd2dldiff = MT41J512M8RH125_DLL_LOCK_DIFF,
 	.cmd2iclkout = MT41J512M8RH125_INVERT_CLKOUT,
 };
 
diff --git a/board/ti/am335x/u-boot.lds b/board/ti/am335x/u-boot.lds
index e77a501f56..6a734b30ac 100644
--- a/board/ti/am335x/u-boot.lds
+++ b/board/ti/am335x/u-boot.lds
@@ -108,10 +108,13 @@ SECTIONS
 		KEEP(*(.__bss_end));
 	}
 
-	/DISCARD/ : { *(.dynsym) }
-	/DISCARD/ : { *(.dynstr*) }
-	/DISCARD/ : { *(.dynamic*) }
-	/DISCARD/ : { *(.plt*) }
-	/DISCARD/ : { *(.interp*) }
-	/DISCARD/ : { *(.gnu*) }
+	.dynsym _end : { *(.dynsym) }
+	.dynbss : { *(.dynbss) }
+	.dynstr : { *(.dynstr*) }
+	.dynamic : { *(.dynamic*) }
+	.hash : { *(.hash*) }
+	.plt : { *(.plt*) }
+	.interp : { *(.interp*) }
+	.gnu : { *(.gnu*) }
+	.ARM.exidx : { *(.ARM.exidx*) }
 }
diff --git a/board/ti/dra7xx/evm.c b/board/ti/dra7xx/evm.c
index 9657c75f23..9ae88c57a4 100644
--- a/board/ti/dra7xx/evm.c
+++ b/board/ti/dra7xx/evm.c
@@ -14,6 +14,7 @@
 #include <palmas.h>
 #include <asm/arch/sys_proto.h>
 #include <asm/arch/mmc_host_def.h>
+#include <asm/arch/sata.h>
 
 #include "mux_data.h"
 
@@ -77,6 +78,12 @@ int board_init(void)
 	return 0;
 }
 
+int board_late_init(void)
+{
+	omap_sata_init();
+	return 0;
+}
+
 /**
  * @brief misc_init_r - Configure EVM board specific configurations
  * such as power configurations, ethernet initialization as phase2 of
diff --git a/board/ti/omap5_uevm/evm.c b/board/ti/omap5_uevm/evm.c
index bb3a699cf7..af854dac1a 100644
--- a/board/ti/omap5_uevm/evm.c
+++ b/board/ti/omap5_uevm/evm.c
@@ -20,6 +20,7 @@
 #include <asm/arch/clock.h>
 #include <asm/arch/ehci.h>
 #include <asm/ehci-omap.h>
+#include <asm/arch/sata.h>
 
 #define DIE_ID_REG_BASE     (OMAP54XX_L4_CORE_BASE + 0x2000)
 #define DIE_ID_REG_OFFSET	0x200
@@ -67,6 +68,12 @@ int board_init(void)
 	return 0;
 }
 
+int board_late_init(void)
+{
+	omap_sata_init();
+	return 0;
+}
+
 int board_eth_init(bd_t *bis)
 {
 	return 0;
diff --git a/board/ti/omap730p2/Makefile b/board/ti/omap730p2/Makefile
deleted file mode 100644
index 8242f3d69f..0000000000
--- a/board/ti/omap730p2/Makefile
+++ /dev/null
@@ -1,9 +0,0 @@
-#
-# (C) Copyright 2000-2006
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# SPDX-License-Identifier:	GPL-2.0+
-#
-
-obj-y	:= omap730p2.o flash.o
-obj-y	+= lowlevel_init.o
diff --git a/board/ti/omap730p2/README.omap730p2 b/board/ti/omap730p2/README.omap730p2
deleted file mode 100644
index 7c70916120..0000000000
--- a/board/ti/omap730p2/README.omap730p2
+++ /dev/null
@@ -1,91 +0,0 @@
-
-		     u-boot for the TI OMAP730 Perseus2
-
-		      Dave Peverley, MPC-Data Limited
-			 http://www.mpc-data.co.uk
-
-
-Overview :
-
- As the OMAP730 is similar to the OMAP1610 in many ways, this port was based
-on the u-boot port to the OMAP1610 Innovator. Supported features are :
-
-  - Serial terminal support
-  - Onboard NOR Flash
-  - Ethernet via the seperate debug board
-  - Tested on Rev4 and Rev5 boards
-
- It has also been tested to work correctly when built with a 'standard' GCC
-3.2.1 cross-compiler as well as Montavista Linux CEE 3.1's toolchain.
-
-
-Hardware Configuration :
-
- The main dips on the P2 board should be set to 2,3,7 and 9 on with all
-others off. On the debug board, dips 1 and 7 should be on with the rest off.
-The serial console has been set up to run from the DB9 connector on the
-P2 board at 115200 baud, 8 data bits, no stop bits, 1 parity bit.
-
- It should be noted that the P2 board has NOR flash that is addressable via
-either CS0 or CS3. This mode can be changed via DIP9 on the P2 board.
-
-
-Installing u-boot for the P2 :
-
- You can simply build u-boot for the Perseus by following the instructions
-in the main readme file. The target configuration is "omap730p2_config".
-Once u-boot has been built, you should strip the executable so it can be
-loaded via CCS (which cant cope with the symbols in the ELF binary) :
-  $ cp u-boot u-boot.out
-  $ arm-linux-strip u-boot.out
-
- The method we've used for installing u-boot the first time on a P2 is
-as follows :
-
-1) Configure TI Code Composer Studio to connect to the P2 board via JTAG
-   as described in the Users Guide.
-
-2) Set up the P2 to boot from CS3, and connect with CCS. Reset the CPU
-   and run the "init_mmu" GEL script.
-
-3) Use the "Load Program" option to send the u-boot.out file to the P2 and
-   run.
-
- At this point, u-boot should run and you will see the boot menu on your
-serial terminal. You can then load the u-boot image to memory :
-
-  # loadb 0x10000000
-
- Send the "u-boot.bin" binary via the serial using Kermit. Once loaded
-you can self-flash u-boot :
-
-  # protect off 1:0
-  # erase 1:0
-  # cp.b 0x10000000 0x0 0x20000
-
- You should now be able to reset the board and run u-boot from flash.
-
-
-Alternative flash option :
-
- Sometimes, if you've been silly, you can get the board into a state where
-whats in flash has upset the board so much that you can no longer connect
-to the P2 via JTAG. However, you can set DIP9 to off to swap the boot mode
-of the P2 so that you boot from RAM instead of NOR flash. This moves NOR
-flash up to 0x0C000000. You can build a special version of u-boot to
-utilise this by the following config :
-
-  $ make omap730p2_cs0boot_config
-
- If you load this up via CCS it will detect flash at its alternate location
-and allow you to programme your u-boot image (which, remember must be built
-for CS3 boot!) Once you do this, you can revert to CS3 boot and it will work
-fine again.
-
-
-Errata :
-
-1) It's been observed that sometimes the tftp transfer of kernels to the
-   board can have checksum errors or stall. This appears to be an issue
-   with the lan91c96.c driver, and can normally be worked around by
-   resetting the board and trying again.
diff --git a/board/ti/omap730p2/config.mk b/board/ti/omap730p2/config.mk
deleted file mode 100644
index 86188204ea..0000000000
--- a/board/ti/omap730p2/config.mk
+++ /dev/null
@@ -1,25 +0,0 @@
-#
-# (C) Copyright 2002
-# Gary Jennejohn, DENX Software Engineering, <garyj@denx.de>
-# David Mueller, ELSOFT AG, <d.mueller@elsoft.ch>
-#
-# (C) Copyright 2003
-# Texas Instruments, <www.ti.com>
-# Kshitij Gupta <Kshitij@ti.com>
-#
-# TI Perseus 2 board with OMAP720 (ARM925EJS) cpu
-# see http://www.ti.com/ for more information on Texas Instruments
-#
-# Innovator has 1 bank of 256 MB SDRAM
-# Physical Address:
-# 1000'0000 to 2000'0000
-#
-#
-# Linux-Kernel is expected to be at 1000'8000, entry 1000'8000
-# (mem base + reserved)
-#
-# we load ourself to 1108'0000
-#
-#
-
-CONFIG_SYS_TEXT_BASE = 0x11080000
diff --git a/board/ti/omap730p2/flash.c b/board/ti/omap730p2/flash.c
deleted file mode 100644
index 56f981c47b..0000000000
--- a/board/ti/omap730p2/flash.c
+++ /dev/null
@@ -1,463 +0,0 @@
-/*
- * (C) Copyright 2001
- * Kyle Harris, Nexus Technologies, Inc. kharris@nexus-tech.net
- *
- * (C) Copyright 2001
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * (C) Copyright 2003
- * Texas Instruments, <www.ti.com>
- * Kshitij Gupta <Kshitij@ti.com>
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#include <common.h>
-#include <linux/byteorder/swab.h>
-
-#define PHYS_FLASH_SECT_SIZE	0x00020000	/* 256 KB sectors (x2) */
-flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS];	/* info for FLASH chips    */
-
-/* Board support for 1 or 2 flash devices */
-#undef FLASH_PORT_WIDTH32
-#define FLASH_PORT_WIDTH16
-
-#ifdef FLASH_PORT_WIDTH16
-#define FLASH_PORT_WIDTH		ushort
-#define FLASH_PORT_WIDTHV		vu_short
-#define SWAP(x)			__swab16(x)
-#else
-#define FLASH_PORT_WIDTH		ulong
-#define FLASH_PORT_WIDTHV		vu_long
-#define SWAP(x)			__swab32(x)
-#endif
-
-#define FPW	FLASH_PORT_WIDTH
-#define FPWV	FLASH_PORT_WIDTHV
-
-#define mb() __asm__ __volatile__ ("" : : : "memory")
-
-
-/* Flash Organization Structure */
-typedef struct OrgDef {
-	unsigned int sector_number;
-	unsigned int sector_size;
-} OrgDef;
-
-
-/* Flash Organizations */
-OrgDef OrgIntel_28F256L18T[] = {
-	{4, 32 * 1024},				/* 4 * 32kBytes sectors */
-	{255, 128 * 1024},			/* 255 * 128kBytes sectors */
-};
-
-
-/*-----------------------------------------------------------------------
- * Functions
- */
-unsigned long flash_init (void);
-static ulong flash_get_size (FPW * addr, flash_info_t * info);
-static int write_data (flash_info_t * info, ulong dest, FPW data);
-static void flash_get_offsets (ulong base, flash_info_t * info);
-void inline spin_wheel (void);
-void flash_print_info (flash_info_t * info);
-void flash_unprotect_sectors (FPWV * addr);
-int flash_erase (flash_info_t * info, int s_first, int s_last);
-int write_buff (flash_info_t * info, uchar * src, ulong addr, ulong cnt);
-
-/*-----------------------------------------------------------------------
- */
-
-unsigned long flash_init (void)
-{
-	int i;
-	ulong size = 0;
-	for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; i++) {
-		switch (i) {
-		case 0:
-			flash_get_size ((FPW *) PHYS_FLASH_1, &flash_info[i]);
-			flash_get_offsets (PHYS_FLASH_1, &flash_info[i]);
-			break;
-		default:
-			panic ("configured too many flash banks!\n");
-			break;
-		}
-		size += flash_info[i].size;
-	}
-
-	/* Protect monitor and environment sectors
-	 */
-	flash_protect (FLAG_PROTECT_SET,
-			CONFIG_SYS_FLASH_BASE,
-			CONFIG_SYS_FLASH_BASE + monitor_flash_len - 1, &flash_info[0]);
-
-	flash_protect (FLAG_PROTECT_SET,
-			CONFIG_ENV_ADDR,
-			CONFIG_ENV_ADDR + CONFIG_ENV_SIZE - 1, &flash_info[0]);
-
-	return size;
-}
-
-/*-----------------------------------------------------------------------
- */
-static void flash_get_offsets (ulong base, flash_info_t * info)
-{
-	int i;
-
-	if (info->flash_id == FLASH_UNKNOWN) {
-		return;
-	}
-
-	if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_INTEL) {
-		for (i = 0; i < info->sector_count; i++) {
-			if (i > 255) {
-				info->start[i] = base + (i * 0x8000);
-				info->protect[i] = 0;
-			} else {
-				info->start[i] = base +
-						(i * PHYS_FLASH_SECT_SIZE);
-				info->protect[i] = 0;
-			}
-		}
-	}
-}
-
-/*-----------------------------------------------------------------------
- */
-void flash_print_info (flash_info_t * info)
-{
-	int i;
-
-	if (info->flash_id == FLASH_UNKNOWN) {
-		printf ("missing or unknown FLASH type\n");
-		return;
-	}
-
-	switch (info->flash_id & FLASH_VENDMASK) {
-	case FLASH_MAN_INTEL:
-		printf ("INTEL ");
-		break;
-	default:
-		printf ("Unknown Vendor ");
-		break;
-	}
-
-	switch (info->flash_id & FLASH_TYPEMASK) {
-	case FLASH_28F256L18T:
-		printf ("FLASH 28F256L18T\n");
-		break;
-	default:
-		printf ("Unknown Chip Type\n");
-		break;
-	}
-
-	printf ("  Size: %ld MB in %d Sectors\n",
-			info->size >> 20, info->sector_count);
-
-	printf ("  Sector Start Addresses:");
-	for (i = 0; i < info->sector_count; ++i) {
-		if ((i % 5) == 0)
-			printf ("\n   ");
-		printf (" %08lX%s",
-			info->start[i], info->protect[i] ? " (RO)" : "     ");
-	}
-	printf ("\n");
-	return;
-}
-
-/*
- * The following code cannot be run from FLASH!
- */
-static ulong flash_get_size (FPW * addr, flash_info_t * info)
-{
-	volatile FPW value;
-
-	/* Write auto select command: read Manufacturer ID */
-	addr[0x5555] = (FPW) 0x00AA00AA;
-	addr[0x2AAA] = (FPW) 0x00550055;
-	addr[0x5555] = (FPW) 0x00900090;
-
-	mb ();
-	value = addr[0];
-
-	switch (value) {
-
-	case (FPW) INTEL_MANUFACT:
-		info->flash_id = FLASH_MAN_INTEL;
-		break;
-
-	default:
-		info->flash_id = FLASH_UNKNOWN;
-		info->sector_count = 0;
-		info->size = 0;
-		addr[0] = (FPW) 0x00FF00FF;	/* restore read mode */
-		return (0);		/* no or unknown flash  */
-	}
-
-	mb ();
-	value = addr[1];	/* device ID        */
-	switch (value) {
-
-	case (FPW) (INTEL_ID_28F256L18T):
-		info->flash_id += FLASH_28F256L18T;
-		info->sector_count = 259;
-		info->size = 0x02000000;
-		break;			/* => 32 MB     */
-
-	default:
-		info->flash_id = FLASH_UNKNOWN;
-		break;
-	}
-
-	if (info->sector_count > CONFIG_SYS_MAX_FLASH_SECT) {
-		printf ("** ERROR: sector count %d > max (%d) **\n",
-				info->sector_count, CONFIG_SYS_MAX_FLASH_SECT);
-		info->sector_count = CONFIG_SYS_MAX_FLASH_SECT;
-	}
-
-	addr[0] = (FPW) 0x00FF00FF;	/* restore read mode */
-
-	return (info->size);
-}
-
-
-/* unprotects a sector for write and erase
- * on some intel parts, this unprotects the entire chip, but it
- * wont hurt to call this additional times per sector...
- */
-void flash_unprotect_sectors (FPWV * addr)
-{
-#define PD_FINTEL_WSMS_READY_MASK    0x0080
-
-	*addr = (FPW) 0x00500050;	/* clear status register */
-
-	/* this sends the clear lock bit command */
-	*addr = (FPW) 0x00600060;
-	*addr = (FPW) 0x00D000D0;
-}
-
-
-/*-----------------------------------------------------------------------
- */
-
-int flash_erase (flash_info_t * info, int s_first, int s_last)
-{
-	int flag, prot, sect;
-	ulong type, start;
-	int rcode = 0;
-
-	if ((s_first < 0) || (s_first > s_last)) {
-		if (info->flash_id == FLASH_UNKNOWN) {
-			printf ("- missing\n");
-		} else {
-			printf ("- no sectors to erase\n");
-		}
-		return 1;
-	}
-
-	type = (info->flash_id & FLASH_VENDMASK);
-	if ((type != FLASH_MAN_INTEL)) {
-		printf ("Can't erase unknown flash type %08lx - aborted\n",
-				info->flash_id);
-		return 1;
-	}
-
-	prot = 0;
-	for (sect = s_first; sect <= s_last; ++sect) {
-		if (info->protect[sect]) {
-			prot++;
-		}
-	}
-
-	if (prot) {
-		printf ("- Warning: %d protected sectors will not be erased!\n",
-				prot);
-	} else {
-		printf ("\n");
-	}
-
-	/* Disable interrupts which might cause a timeout here */
-	flag = disable_interrupts ();
-
-	/* Start erase on unprotected sectors */
-	for (sect = s_first; sect <= s_last; sect++) {
-		if (info->protect[sect] == 0) {	/* not protected */
-			FPWV *addr = (FPWV *) (info->start[sect]);
-			FPW status;
-
-			printf ("Erasing sector %2d ... ", sect);
-
-			flash_unprotect_sectors (addr);
-
-			/* arm simple, non interrupt dependent timer */
-			start = get_timer(0);
-
-			*addr = (FPW) 0x00500050;/* clear status register */
-			*addr = (FPW) 0x00200020;/* erase setup */
-			*addr = (FPW) 0x00D000D0;/* erase confirm */
-
-			while (((status =
-				*addr) & (FPW) 0x00800080) !=
-				(FPW) 0x00800080) {
-					if (get_timer(start) >
-					CONFIG_SYS_FLASH_ERASE_TOUT) {
-					printf ("Timeout\n");
-					/* suspend erase     */
-					*addr = (FPW) 0x00B000B0;
-					/* reset to read mode */
-					*addr = (FPW) 0x00FF00FF;
-					rcode = 1;
-					break;
-				}
-			}
-
-			/* clear status register cmd.   */
-			*addr = (FPW) 0x00500050;
-			*addr = (FPW) 0x00FF00FF;/* resest to read mode */
-			printf (" done\n");
-		}
-	}
-
-	if (flag)
-		enable_interrupts();
-
-	return rcode;
-}
-
-/*-----------------------------------------------------------------------
- * Copy memory to flash, returns:
- * 0 - OK
- * 1 - write timeout
- * 2 - Flash not erased
- * 4 - Flash not identified
- */
-
-int write_buff (flash_info_t * info, uchar * src, ulong addr, ulong cnt)
-{
-	ulong cp, wp;
-	FPW data;
-	int count, i, l, rc, port_width;
-
-	if (info->flash_id == FLASH_UNKNOWN) {
-		return 4;
-	}
-/* get lower word aligned address */
-#ifdef FLASH_PORT_WIDTH16
-	wp = (addr & ~1);
-	port_width = 2;
-#else
-	wp = (addr & ~3);
-	port_width = 4;
-#endif
-
-	/*
-	 * handle unaligned start bytes
-	 */
-	if ((l = addr - wp) != 0) {
-		data = 0;
-		for (i = 0, cp = wp; i < l; ++i, ++cp) {
-			data = (data << 8) | (*(uchar *) cp);
-		}
-		for (; i < port_width && cnt > 0; ++i) {
-			data = (data << 8) | *src++;
-			--cnt;
-			++cp;
-		}
-		for (; cnt == 0 && i < port_width; ++i, ++cp) {
-			data = (data << 8) | (*(uchar *) cp);
-		}
-
-		if ((rc = write_data (info, wp, SWAP (data))) != 0) {
-			return (rc);
-		}
-		wp += port_width;
-	}
-
-	/*
-	 * handle word aligned part
-	 */
-	count = 0;
-	while (cnt >= port_width) {
-		data = 0;
-		for (i = 0; i < port_width; ++i) {
-			data = (data << 8) | *src++;
-		}
-		if ((rc = write_data (info, wp, SWAP (data))) != 0) {
-			return (rc);
-		}
-		wp += port_width;
-		cnt -= port_width;
-		if (count++ > 0x800) {
-			spin_wheel ();
-			count = 0;
-		}
-	}
-
-	if (cnt == 0) {
-		return (0);
-	}
-
-	/*
-	 * handle unaligned tail bytes
-	 */
-	data = 0;
-	for (i = 0, cp = wp; i < port_width && cnt > 0; ++i, ++cp) {
-		data = (data << 8) | *src++;
-		--cnt;
-	}
-	for (; i < port_width; ++i, ++cp) {
-		data = (data << 8) | (*(uchar *) cp);
-	}
-
-	return (write_data (info, wp, SWAP (data)));
-}
-
-/*-----------------------------------------------------------------------
- * Write a word or halfword to Flash, returns:
- * 0 - OK
- * 1 - write timeout
- * 2 - Flash not erased
- */
-static int write_data (flash_info_t * info, ulong dest, FPW data)
-{
-	FPWV *addr = (FPWV *) dest;
-	ulong status;
-	int flag, rc = 0;
-	ulong start;
-
-	/* Check if Flash is (sufficiently) erased */
-	if ((*addr & data) != data) {
-		printf ("not erased at %08lx (%x)\n", (ulong) addr, *addr);
-		return (2);
-	}
-	flash_unprotect_sectors (addr);
-	/* Disable interrupts which might cause a timeout here */
-	flag = disable_interrupts ();
-	*addr = (FPW) 0x00400040;	/* write setup */
-	*addr = data;
-
-	/* arm simple, non interrupt dependent timer */
-	start = get_timer(0);
-
-	/* wait while polling the status register */
-	while (((status = *addr) & (FPW) 0x00800080) != (FPW) 0x00800080) {
-		if (get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT) {
-			rc = 1;
-			goto done;
-		}
-	}
-done:
-	*addr = (FPW)0x00FF00FF;	/* restore read mode */
-	if (flag)
-		enable_interrupts();
-	return rc;
-}
-
-void inline spin_wheel (void)
-{
-	static int p = 0;
-	static char w[] = "\\/-";
-
-	printf ("\010%c", w[p]);
-	(++p == 3) ? (p = 0) : 0;
-}
diff --git a/board/ti/omap730p2/lowlevel_init.S b/board/ti/omap730p2/lowlevel_init.S
deleted file mode 100644
index 795c495372..0000000000
--- a/board/ti/omap730p2/lowlevel_init.S
+++ /dev/null
@@ -1,379 +0,0 @@
-/*
- * Board specific setup info
- *
- * (C) Copyright 2003-2004
- *
- * Texas Instruments, <www.ti.com>
- * Kshitij Gupta <Kshitij@ti.com>
- *
- * Modified for OMAP 1610 H2 board by Nishant Kamat, Jan 2004
- *
- * Modified for OMAP730 P2 Board by Dave Peverley, MPC-Data Limited
- * (http://www.mpc-data.co.uk)
- *
- * TODO : Tidy up and change to use system register defines
- *        from omap730.h where possible.
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#include <config.h>
-#include <version.h>
-
-#if defined(CONFIG_OMAP730)
-#include <./configs/omap730.h>
-#endif
-
-_TEXT_BASE:
-	.word	CONFIG_SYS_TEXT_BASE	/* sdram load addr from config.mk */
-
-.globl lowlevel_init
-lowlevel_init:
-	/* Save callers address in r11 - r11 must never be modified */
-	mov r11, lr
-
-	/*------------------------------------------------------*
-	 *mask all IRQs by setting all bits in the INTMR default*
-	 *------------------------------------------------------*/
-	mov	r1,	#0xffffffff
-	ldr	r0,	=REG_IHL1_MIR
-	str	r1,	[r0]
-	ldr	r0,	=REG_IHL2_MIR
-	str	r1,	[r0]
-
-	/*------------------------------------------------------*
-	 * Set up ARM CLM registers (IDLECT1)                   *
-	 *------------------------------------------------------*/
-	ldr	r0,	REG_ARM_IDLECT1
-	ldr	r1,	VAL_ARM_IDLECT1
-	str	r1,	[r0]
-
-	/*------------------------------------------------------*
-	 * Set up ARM CLM registers (IDLECT2)		        *
-	 *------------------------------------------------------*/
-	ldr	r0,	REG_ARM_IDLECT2
-	ldr	r1,	VAL_ARM_IDLECT2
-	str	r1,	[r0]
-
-	/*------------------------------------------------------*
-	 * Set up ARM CLM registers (IDLECT3)		        *
-	 *------------------------------------------------------*/
-	ldr	r0,	REG_ARM_IDLECT3
-	ldr	r1,	VAL_ARM_IDLECT3
-	str	r1,	[r0]
-
-
-	mov	r1,	#0x01		/* PER_EN bit */
-	ldr	r0,	REG_ARM_RSTCT2
-	strh	r1,	[r0]		/* CLKM; Peripheral reset. */
-
-	/* Set CLKM to Sync-Scalable	*/
-	/* I supposedly need to enable the dsp clock before switching */
-	mov	r1,	#0x1000
-	ldr	r0,	REG_ARM_SYSST
-	strh	r1,	[r0]
-	mov	r0,	#0x400
-1:
-	subs	r0,	r0,	#0x1	/* wait for any bubbles to finish */
-	bne	1b
-	ldr	r1,	VAL_ARM_CKCTL
-	ldr	r0,	REG_ARM_CKCTL
-	strh	r1,	[r0]
-
-	/* a few nops to let settle */
-	nop
-	nop
-	nop
-	nop
-	nop
-	nop
-	nop
-	nop
-	nop
-	nop
-
-	/* setup DPLL 1 */
-	/* Ramp up the clock to 96Mhz */
-	ldr	r1,	VAL_DPLL1_CTL
-	ldr	r0,	REG_DPLL1_CTL
-	strh	r1,	[r0]
-	ands	r1,	r1,	#0x10	/* Check if PLL is enabled. */
-	beq	lock_end	/* Do not look for lock if BYPASS selected */
-2:
-	ldrh	r1,	[r0]
-	ands	r1,	r1,	#0x01	/*	Check the LOCK bit.*/
-	beq 2b			/*	loop until bit goes hi. */
-lock_end:
-
-	/*------------------------------------------------------*
-	 * Turn off the watchdog during init...			*
-	 *------------------------------------------------------*/
-	ldr	r0,	REG_WATCHDOG
-	ldr	r1,	WATCHDOG_VAL1
-	str	r1,	[r0]
-	ldr	r1,	WATCHDOG_VAL2
-	str	r1,	[r0]
-	ldr	r0,	REG_WSPRDOG
-	ldr	r1,	WSPRDOG_VAL1
-	str	r1,	[r0]
-	ldr	r0,	REG_WWPSDOG
-
-watch1Wait:
-	ldr	r1,	[r0]
-	tst	r1,	#0x10
-	bne	watch1Wait
-
-	ldr	r0,	REG_WSPRDOG
-	ldr	r1,	WSPRDOG_VAL2
-	str	r1,	[r0]
-	ldr	r0,	REG_WWPSDOG
-watch2Wait:
-	ldr	r1,	[r0]
-	tst	r1,	#0x10
-	bne	watch2Wait
-
-	/* Set memory timings corresponding to the new clock speed */
-
-	/* Check execution location to determine current execution location
-	 * and branch to appropriate initialization code.
-	 */
-	/* Compare physical SDRAM base & current execution location. */
-	and     r0, pc, #0xF0000000
-	/* Compare. */
-	cmp     r0, #0
-	/* Skip over EMIF-fast initialization if running from SDRAM. */
-	bne	skip_sdram
-
-	/*
-	* Delay for SDRAM initialization.
-	*/
-	mov	r3,	#0x1800		/* value should be checked */
-3:
-	subs	r3,	r3,	#0x1	/* Decrement count */
-	bne	3b
-
-	ldr	r0,	REG_SDRAM_CONFIG
-	ldr	r1,	SDRAM_CONFIG_VAL
-	str	r1,	[r0]
-
-	ldr	r0,	REG_SDRAM_MRS_LEGACY
-	ldr	r1,	SDRAM_MRS_VAL
-	str	r1,	[r0]
-
-skip_sdram:
-
-common_tc:
-	/* slow interface */
-	ldr	r1,	VAL_TC_EMIFS_CS0_CONFIG
-	ldr	r0,	REG_TC_EMIFS_CS0_CONFIG
-	str	r1,	[r0] /* Chip Select 0 */
-
-	ldr	r1,	VAL_TC_EMIFS_CS1_CONFIG
-	ldr	r0,	REG_TC_EMIFS_CS1_CONFIG
-	str	r1,	[r0] /* Chip Select 1 */
-	ldr	r1,	VAL_TC_EMIFS_CS2_CONFIG
-	ldr	r0,	REG_TC_EMIFS_CS2_CONFIG
-	str	r1,	[r0] /* Chip Select 2 */
-	ldr	r1,	VAL_TC_EMIFS_CS3_CONFIG
-	ldr	r0,	REG_TC_EMIFS_CS3_CONFIG
-	str	r1,	[r0] /* Chip Select 3 */
-
-	/* 48MHz clock request for UART1 */
-	ldr	r1,	PERSEUS2_CONFIG_BASE
-	ldrh	r0,	[r1, #CONFIG_PCC_CONF]
-	orr	r0,	r0, #CONF_MOD_UART1_CLK_MODE_R
-	strh	r0,	[r1, #CONFIG_PCC_CONF]
-
-	/* Initialize public and private rheas
-	 *  - set access factor 2 on both rhea / strobe
-	 *  - disable write buffer on strb0, enable write buffer on strb1
-	 */
-
-	ldr	R0,	REG_RHEA_PUB_CTL
-	ldr	R1,	REG_RHEA_PRIV_CTL
-	ldr	R2,	VAL_RHEA_CTL
-	strh	R2,	[R0]
-	strh	R2,	[R1]
-	mov	R3,	#2          /* disable write buffer on strb0, enable write buffer on strb1 */
-	strh	R3,	[R0, #0x08]	/* arm rhea control reg */
-	strh	R3,	[R1, #0x08]
-
-	/* enable IRQ and FIQ */
-
-	mrs	r4,	CPSR
-	bic	r4,	r4, #IRQ_MASK
-	bic	r4,	r4, #FIQ_MASK
-	msr	CPSR,	r4
-
-	/* set TAP CONF to TRI EMULATION */
-
-	ldr	r1,	[r0, #CONFIG_MODE2]
-	bic	r1,	r1, #0x18
-	orr	r1,	r1, #0x10
-	str	r1,	[r0, #CONFIG_MODE2]
-
-	/* set tdbgen to 1 */
-
-	ldr	r0,	PERSEUS2_CONFIG_BASE
-	ldr	r1,	[r0, #CONFIG_MODE1]
-	mov	r2,	#0x10000
-	orr	r1,	r1, r2
-	str	r1,	[r0, #CONFIG_MODE1]
-
-#ifdef CONFIG_P2_OMAP1610
-	/* inserting additional 2 clock cycle hold time for LAN */
-	ldr     r0,     REG_TC_EMIFS_CS1_ADVANCED
-	ldr	r1,     VAL_TC_EMIFS_CS1_ADVANCED
-	str     r1,     [r0]
-#endif
-	/* Start MPU Timer 1 */
-	ldr	r0,	REG_MPU_LOAD_TIMER
-	ldr	r1,	VAL_MPU_LOAD_TIMER
-	str	r1,	[r0]
-
-	ldr	r0,	REG_MPU_CNTL_TIMER
-	ldr	r1,	VAL_MPU_CNTL_TIMER
-	str	r1,	[r0]
-
-	/* back to arch calling code */
-	mov	pc,	r11
-
-	/* the literal pools origin */
-	.ltorg
-
-REG_TC_EMIFS_CONFIG:		/* 32 bits */
-	.word 0xfffecc0c
-REG_TC_EMIFS_CS0_CONFIG:	/* 32 bits */
-	.word 0xfffecc10
-REG_TC_EMIFS_CS1_CONFIG:	/* 32 bits */
-	.word 0xfffecc14
-REG_TC_EMIFS_CS2_CONFIG:	/* 32 bits */
-	.word 0xfffecc18
-REG_TC_EMIFS_CS3_CONFIG:	/* 32 bits */
-	.word 0xfffecc1c
-
-#ifdef CONFIG_P2_OMAP730
-REG_TC_EMIFS_CS1_ADVANCED:	/* 32 bits */
-	.word 0xfffecc54
-#endif
-
-/* MPU clock/reset/power mode control registers */
-REG_ARM_CKCTL:			/* 16 bits */
-	.word 0xfffece00
-
-REG_ARM_IDLECT3:		/* 16 bits */
-	.word 0xfffece24
-REG_ARM_IDLECT2:		/* 16 bits */
-	.word 0xfffece08
-REG_ARM_IDLECT1:		/* 16 bits */
-	.word 0xfffece04
-
-REG_ARM_RSTCT2:			/* 16 bits */
-	.word 0xfffece14
-REG_ARM_SYSST:			/* 16 bits */
-	.word 0xfffece18
-/* DPLL control registers */
-REG_DPLL1_CTL:			/* 16 bits */
-	.word 0xfffecf00
-
-/* Watch Dog register */
-/* secure watchdog stop */
-REG_WSPRDOG:
-	.word 0xfffeb048
-/* watchdog write pending */
-REG_WWPSDOG:
-	.word 0xfffeb034
-
-WSPRDOG_VAL1:
-	.word 0x0000aaaa
-WSPRDOG_VAL2:
-	.word 0x00005555
-
-/* SDRAM config is: auto refresh enabled, 16 bit 4 bank,
- counter @8192 rows, 10 ns, 8 burst */
-REG_SDRAM_CONFIG:
-	.word 0xfffecc20
-
-REG_SDRAM_MRS_LEGACY:
-	.word 0xfffecc24
-
-REG_WATCHDOG:
-	.word 0xfffec808
-
-REG_MPU_LOAD_TIMER:
-	.word 0xfffec504
-REG_MPU_CNTL_TIMER:
-	.word 0xfffec500
-
-/* Public and private rhea bridge registers definition */
-
-REG_RHEA_PUB_CTL:
-	.word 0xFFFECA00
-
-REG_RHEA_PRIV_CTL:
-	.word 0xFFFED300
-
-/* EMIFF SDRAM Configuration register
-   - self refresh disable
-   - auto refresh enabled
-   - SDRAM type 64 Mb, 16 bits bus 4 banks
-   - power down enabled
-   - SDRAM clock disabled
- */
-SDRAM_CONFIG_VAL:
-	.word 0x0C017DF4
-
-/* Burst full page length ; cas latency = 3 */
-SDRAM_MRS_VAL:
-	.word 0x00000037
-
-VAL_ARM_CKCTL:
-	.word 0x6505
-VAL_DPLL1_CTL:
-	.word 0x3412
-
-#ifdef CONFIG_P2_OMAP730
-VAL_TC_EMIFS_CS0_CONFIG:
-	.word 0x0000FFF3
-VAL_TC_EMIFS_CS1_CONFIG:
-	.word 0x00004278
-VAL_TC_EMIFS_CS2_CONFIG:
-	.word 0x00004278
-VAL_TC_EMIFS_CS3_CONFIG:
-	.word 0x00004278
-VAL_TC_EMIFS_CS1_ADVANCED:
-	.word 0x00000022
-#endif
-
-VAL_ARM_IDLECT1:
-	.word 0x00000400
-VAL_ARM_IDLECT2:
-	.word 0x00000886
-VAL_ARM_IDLECT3:
-	.word 0x00000015
-
-WATCHDOG_VAL1:
-	.word 0x000000f5
-WATCHDOG_VAL2:
-	.word 0x000000a0
-
-VAL_MPU_LOAD_TIMER:
-	.word 0xffffffff
-VAL_MPU_CNTL_TIMER:
-	.word 0xffffffa1
-
-VAL_RHEA_CTL:
-	.word			0xFF22
-
-/* Config Register vals */
-PERSEUS2_CONFIG_BASE:
-	.word			0xFFFE1000
-
-.equ	CONFIG_PCC_CONF,	0xB4
-.equ	CONFIG_MODE1,		0x10
-.equ	CONFIG_MODE2,		0x14
-.equ	CONF_MOD_UART1_CLK_MODE_R,	0x0A
-
-/* misc values */
-.equ	IRQ_MASK,		0x80           /* IRQ mask value */
-.equ	FIQ_MASK,		0x40           /* FIQ mask value */
diff --git a/board/ti/omap730p2/omap730p2.c b/board/ti/omap730p2/omap730p2.c
deleted file mode 100644
index 554019c207..0000000000
--- a/board/ti/omap730p2/omap730p2.c
+++ /dev/null
@@ -1,255 +0,0 @@
-/*
- * (C) Copyright 2002
- * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
- * Marius Groeger <mgroeger@sysgo.de>
- *
- * (C) Copyright 2002
- * David Mueller, ELSOFT AG, <d.mueller@elsoft.ch>
- *
- * (C) Copyright 2003
- * Texas Instruments, <www.ti.com>
- * Kshitij Gupta <Kshitij@ti.com>
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#include <common.h>
-#include <netdev.h>
-#if defined(CONFIG_OMAP730)
-#include <./configs/omap730.h>
-#endif
-
-DECLARE_GLOBAL_DATA_PTR;
-
-int test_boot_mode(void);
-void spin_up_leds(void);
-void flash__init (void);
-void ether__init (void);
-void set_muxconf_regs (void);
-void peripheral_power_enable (void);
-
-#define FLASH_ON_CS0	1
-#define FLASH_ON_CS3	0
-
-static inline void delay (unsigned long loops)
-{
-	__asm__ volatile ("1:\n"
-			  "subs %0, %1, #1\n"
-			  "bne 1b":"=r" (loops):"0" (loops));
-}
-
-int test_boot_mode(void)
-{
-	/* Check for CS0 and CS3 address decode swapping */
-	if (*((volatile int *)EMIFS_CONFIG) & 0x00000002)
-		return(FLASH_ON_CS3);
-	else
-		return(FLASH_ON_CS0);
-}
-
-/* Toggle backup LED indication */
-void toggle_backup_led(void)
-{
-	static int  backupLEDState = 0;	 /* Init variable so that the LED will be ON the first time */
-	volatile unsigned int *IOConfReg;
-
-
-	IOConfReg = (volatile unsigned int *) ((unsigned int) OMAP730_GPIO_BASE_5 + GPIO_DATA_OUTPUT);
-
-	if (backupLEDState != 0) {
-		*IOConfReg &= (0xFFFFEFFF);
-		backupLEDState = 0;
-	} else {
-		*IOConfReg |= (0x00001000);
-		backupLEDState = 1;
-	}
-}
-
-/*
- * Miscellaneous platform dependent initialisations
- */
-
-int board_init (void)
-{
-	/* arch number of OMAP 730 P2 Board - Same as the Innovator! */
-	gd->bd->bi_arch_number = MACH_TYPE_OMAP_PERSEUS2;
-
-	/* adress of boot parameters */
-	gd->bd->bi_boot_params = 0x10000100;
-
-	/* Configure MUX settings */
-	set_muxconf_regs ();
-
-	peripheral_power_enable ();
-
-	/* Backup LED indication via GPIO_140 -> Red led if MUX correctly setup */
-	toggle_backup_led();
-
-	/* Hold GSM in reset until needed */
-	*((volatile unsigned short *)M_CTL) &= ~1;
-
-	/*
-	 *  CSx timings, GPIO Mux ... setup
-	 */
-
-	/* Flash: CS0 timings setup */
-	*((volatile unsigned int *) FLASH_CFG_0) = 0x0000fff3;
-	*((volatile unsigned int *) FLASH_ACFG_0_1) = 0x00000088;
-
-	/* Ethernet support trough the debug board */
-	/* CS1 timings setup */
-	*((volatile unsigned int *) FLASH_CFG_1) = 0x0000fff3;
-	*((volatile unsigned int *) FLASH_ACFG_0_1) = 0x00000000;
-
-	/* this speeds up your boot a quite a bit.  However to make it
-	 *  work, you need make sure your kernel startup flush bug is fixed.
-	 *  ... rkw ...
-	 */
-	icache_enable ();
-
-	flash__init ();
-	ether__init ();
-
-	return 0;
-}
-
-/******************************
- Routine:
- Description:
-******************************/
-void flash__init (void)
-{
-	unsigned int regval;
-
-	regval = *((volatile unsigned int *) EMIFS_CONFIG);
-	/* Turn off write protection for flash devices. */
-	regval = regval | 0x0001;
-	*((volatile unsigned int *) EMIFS_CONFIG) = regval;
-}
-
-/*************************************************************
- Routine:ether__init
- Description: take the Ethernet controller out of reset and wait
-			   for the EEPROM load to complete.
-*************************************************************/
-void ether__init (void)
-{
-#define LAN_RESET_REGISTER 0x0400001c
-
-	*((volatile unsigned short *) LAN_RESET_REGISTER) = 0x0000;
-	do {
-		*((volatile unsigned short *) LAN_RESET_REGISTER) = 0x0001;
-		udelay (100);
-	} while (*((volatile unsigned short *) LAN_RESET_REGISTER) != 0x0001);
-
-	do {
-		*((volatile unsigned short *) LAN_RESET_REGISTER) = 0x0000;
-		udelay (100);
-	} while (*((volatile unsigned short *) LAN_RESET_REGISTER) != 0x0000);
-
-#define ETH_CONTROL_REG 0x0400030b
-
-	*((volatile unsigned char *) ETH_CONTROL_REG) &= ~0x01;
-	udelay (100);
-}
-
-/******************************
- Routine:
- Description:
-******************************/
-int dram_init (void)
-{
-	gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
-	gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE;
-
-	return 0;
-}
-
-/******************************************************
- Routine: set_muxconf_regs
- Description: Setting up the configuration Mux registers
-			  specific to the hardware
-*******************************************************/
-void set_muxconf_regs (void)
-{
-	volatile unsigned int *MuxConfReg;
-	/* set each registers to its reset value; */
-
-	/*
-	 *  Backup LED Indication
-	 */
-
-	/* Configure MUXed pin. Mode 6: GPIO_140 */
-	MuxConfReg = (volatile unsigned int *) (PERSEUS2_IO_CONF10);
-	*MuxConfReg &= (0xFFFFFF1F);	     /* Clear D_MPU_LPG1 */
-	*MuxConfReg |= 0x000000C0;	     /* Set D_MPU_LPG1 to 0x6 */
-
-	/* Configure GPIO_140 as output */
-	MuxConfReg = (volatile unsigned int *) ((unsigned int) OMAP730_GPIO_BASE_5 + GPIO_DIRECTION_CONTROL);
-	*MuxConfReg &= (0xFFFFEFFF);	     /* Clear direction (output) for GPIO 140 */
-
-	/*
-	 * Configure GPIOs for battery charge & feedback
-	 */
-
-	/* Configure MUXed pin. Mode 6: GPIO_35 */
-	MuxConfReg = (volatile unsigned int *) (PERSEUS2_IO_CONF3);
-	*MuxConfReg &= 0xFFFFFFF1;	     /* Clear M_CLK_OUT */
-	*MuxConfReg |= 0x0000000C;	     /* Set M_CLK_OUT = 0x6 (GPIOs) */
-
-	/* Configure MUXed pin. Mode 6: GPIO_72,73,74 */
-	MuxConfReg = (volatile unsigned int *) (PERSEUS2_IO_CONF5);
-	*MuxConfReg &= 0xFFFF1FFF;	     /* Clear D_DDR */
-	*MuxConfReg |= 0x0000C000;	     /* Set D_DDR = 0x6 (GPIOs) */
-
-	MuxConfReg = (volatile unsigned int *) ((unsigned int) OMAP730_GPIO_BASE_3 + GPIO_DIRECTION_CONTROL);
-	*MuxConfReg |= 0x00000100;	     /* Configure GPIO_72 as input */
-	*MuxConfReg &= 0xFFFFFDFF;	     /* Configure GPIO_73 as output	*/
-
-	/*
-	 * Allow battery charge
-	 */
-
-	MuxConfReg = (volatile unsigned int *) ((unsigned int) OMAP730_GPIO_BASE_3 + GPIO_DATA_OUTPUT);
-	*MuxConfReg &= (0xFFFFFDFF);	     /* Clear GPIO_73 pin */
-
-	/*
-	 * Configure MPU_EXT_NIRQ IO in IO_CONF9 register,
-	 * It is used as the Ethernet controller interrupt
-	 */
-	MuxConfReg = (volatile unsigned int *) (PERSEUS2_IO_CONF9);
-	*MuxConfReg &= 0x1FFFFFFF;
-}
-
-/******************************************************
- Routine: peripheral_power_enable
- Description: Enable the power for UART1
-*******************************************************/
-void peripheral_power_enable (void)
-{
-	volatile unsigned int *MuxConfReg;
-
-
-	/* Set up pins used by UART */
-
-	/* Start UART clock (48MHz) */
-	MuxConfReg = (volatile unsigned int *) (PERSEUS_PCC_CONF_REG);
-	*MuxConfReg &= (0xFFFFFFF7);
-	*MuxConfReg |= (0x00000008);
-
-	/* Get the UART pin in mode0  */
-	MuxConfReg = (volatile unsigned int *) (PERSEUS2_IO_CONF3);
-	*MuxConfReg &= (0xFF1FFFFF);
-	*MuxConfReg &= (0xF1FFFFFF);
-}
-
-#ifdef CONFIG_CMD_NET
-int board_eth_init(bd_t *bis)
-{
-	int rc = 0;
-#ifdef CONFIG_LAN91C96
-	rc = lan91c96_initialize(0, CONFIG_LAN91C96_BASE);
-#endif
-	return rc;
-}
-#endif
diff --git a/board/ti/panda/panda.c b/board/ti/panda/panda.c
index c104024b10..cda09a9125 100644
--- a/board/ti/panda/panda.c
+++ b/board/ti/panda/panda.c
@@ -123,6 +123,66 @@ int get_board_revision(void)
 }
 
 /**
+ * is_panda_es_rev_b3() - Detect if we are running on rev B3 of panda board ES
+ *
+ *
+ * Detect if we are running on B3 version of ES panda board,
+ * This can be done by reading the level of GPIO 171 and checking the
+ * processor revisions.
+ * GPIO171: 1 => Panda ES Rev B3
+ *
+ * Return : return 1 if Panda ES Rev B3 , else return 0
+ */
+u8 is_panda_es_rev_b3(void)
+{
+        int processor_rev = omap_revision();
+        int ret = 0;
+
+        if ((processor_rev >= OMAP4460_ES1_0 &&
+             processor_rev <= OMAP4460_ES1_1)) {
+
+                /* Setup the mux for the common board ID pins (gpio 171) */
+                writew((IEN | M3),
+			(*ctrl)->control_padconf_core_base + UNIPRO_TX0);
+
+                /* if processor_rev is panda ES and GPIO171 is 1,it is rev b3 */
+                ret = gpio_get_value(PANDA_BOARD_ID_2_GPIO);
+        }
+        return ret;
+}
+
+#ifdef CONFIG_SYS_EMIF_PRECALCULATED_TIMING_REGS
+/*
+ * emif_get_reg_dump() - emif_get_reg_dump strong function
+ *
+ * @emif_nr - emif base
+ * @regs - reg dump of timing values
+ *
+ * Strong function to override emif_get_reg_dump weak function in sdram_elpida.c
+ */
+void emif_get_reg_dump(u32 emif_nr, const struct emif_regs **regs)
+{
+	u32 omap4_rev = omap_revision();
+
+	/* Same devices and geometry on both EMIFs */
+	if (omap4_rev == OMAP4430_ES1_0)
+		*regs = &emif_regs_elpida_380_mhz_1cs;
+	else if (omap4_rev == OMAP4430_ES2_0)
+		*regs = &emif_regs_elpida_200_mhz_2cs;
+	else if (omap4_rev == OMAP4430_ES2_3)
+		*regs = &emif_regs_elpida_400_mhz_1cs;
+	else if (omap4_rev < OMAP4470_ES1_0) {
+		if(is_panda_es_rev_b3())
+			*regs = &emif_regs_elpida_400_mhz_1cs;
+		else
+			*regs = &emif_regs_elpida_400_mhz_2cs;
+	}
+	else
+		*regs = &emif_regs_elpida_400_mhz_1cs;
+}
+#endif
+
+/**
  * @brief misc_init_r - Configure Panda board specific configurations
  * such as power configurations, ethernet initialization as phase2 of
  * boot sequence
diff --git a/board/ti/ti814x/evm.c b/board/ti/ti814x/evm.c
index e406326a11..0b76a77905 100644
--- a/board/ti/ti814x/evm.c
+++ b/board/ti/ti814x/evm.c
@@ -33,15 +33,12 @@ static struct ctrl_dev *cdev = (struct ctrl_dev *)CTRL_DEVICE_BASE;
 #ifdef CONFIG_SPL_BUILD
 static const struct cmd_control evm_ddr2_cctrl_data = {
 	.cmd0csratio	= 0x80,
-	.cmd0dldiff	= 0x04,
 	.cmd0iclkout	= 0x00,
 
 	.cmd1csratio	= 0x80,
-	.cmd1dldiff	= 0x04,
 	.cmd1iclkout	= 0x00,
 
 	.cmd2csratio	= 0x80,
-	.cmd2dldiff	= 0x04,
 	.cmd2iclkout	= 0x00,
 };
 
@@ -77,8 +74,6 @@ static const struct ddr_data evm_ddr2_data = {
 	.datagiratio0		= ((0<<10) | (0<<0)),
 	.datafwsratio0		= ((0x90<<10) | (0x90<<0)),
 	.datawrsratio0		= ((0x50<<10) | (0x50<<0)),
-	.datauserank0delay	= 1,
-	.datadldiff0		= 0x4,
 };
 
 void set_uart_mux_conf(void)
diff --git a/board/ti/ti816x/evm.c b/board/ti/ti816x/evm.c
index 74d35e936d..a53859e52e 100644
--- a/board/ti/ti816x/evm.c
+++ b/board/ti/ti816x/evm.c
@@ -59,21 +59,16 @@ static struct ddr_data ddr2_data = {
 	.datagiratio0		= ((0x0<<10) | (0x0<<0)),
 	.datafwsratio0		= ((0x13A<<10) | (0x13A<<0)),
 	.datawrsratio0		= ((0x8A<<10) | (0x8A<<0)),
-	.datauserank0delay	= 0x1,
-	.datadldiff0		= 0x0, /* depend on cpu rev, set later */
 };
 
 static struct cmd_control ddr2_ctrl = {
 	.cmd0csratio	= 0x80,
-	.cmd0dldiff	= 0x04, /* reset value is 0x4 */
 	.cmd0iclkout	= 0x00,
 
 	.cmd1csratio	= 0x80,
-	.cmd1dldiff	= 0x04, /* reset value is 0x4 */
 	.cmd1iclkout	= 0x00,
 
 	.cmd2csratio	= 0x80,
-	.cmd2dldiff	= 0x04, /* reset value is 0x4 */
 	.cmd2iclkout	= 0x00,
 
 };
@@ -150,21 +145,16 @@ static struct ddr_data ddr3_data = {
 	.datagiratio0		= ((0x20<<10) | 0x20<<0),
 	.datafwsratio0		= ((RD_DQS_GATE<<10) | (RD_DQS_GATE<<0)),
 	.datawrsratio0		= (((WR_DQS+0x40)<<10) | ((WR_DQS+0x40)<<0)),
-	.datauserank0delay	= 0x1,
-	.datadldiff0		= 0x0, /* depend on cpu rev, set later */
 };
 
 static const struct cmd_control ddr3_ctrl = {
 	.cmd0csratio	= 0x100,
-	.cmd0dldiff	= 0x004, /* reset value is 0x4 */
 	.cmd0iclkout	= 0x001,
 
 	.cmd1csratio	= 0x100,
-	.cmd1dldiff	= 0x004, /* reset value is 0x4 */
 	.cmd1iclkout	= 0x001,
 
 	.cmd2csratio	= 0x100,
-	.cmd2dldiff	= 0x004, /* reset value is 0x4 */
 	.cmd2iclkout	= 0x001,
 };
 
@@ -198,11 +188,6 @@ void sdram_init(void)
 	config_dmm(&evm_lisa_map_regs);
 
 #ifdef CONFIG_TI816X_EVM_DDR2
-	ddr2_data.datadldiff0 = (get_cpu_rev() == 0x1 ? 0x0 : 0xF);
-	ddr2_ctrl.cmd0dldiff = (get_cpu_rev() == 0x1 ? 0x0 : 0xF);
-	ddr2_ctrl.cmd1dldiff = (get_cpu_rev() == 0x1 ? 0x0 : 0xF);
-	ddr2_ctrl.cmd2dldiff = (get_cpu_rev() == 0x1 ? 0x0 : 0xF);
-
 	if (CONFIG_TI816X_USE_EMIF0) {
 		ddr2_emif0_regs.emif_ddr_phy_ctlr_1 =
 			(get_cpu_rev() == 0x1 ? 0x0000010B : 0x0000030B);
@@ -217,8 +202,6 @@ void sdram_init(void)
 #endif
 
 #ifdef CONFIG_TI816X_EVM_DDR3
-	ddr3_data.datadldiff0 = (get_cpu_rev() == 0x1 ? 0x0 : 0xF);
-
 	if (CONFIG_TI816X_USE_EMIF0)
 		config_ddr(0, 0, &ddr3_data, &ddr3_ctrl, &ddr3_emif0_regs, 0);
 
diff --git a/board/vpac270/u-boot-spl.lds b/board/vpac270/u-boot-spl.lds
index c9b50e9f4d..02d107c4b9 100644
--- a/board/vpac270/u-boot-spl.lds
+++ b/board/vpac270/u-boot-spl.lds
@@ -62,13 +62,13 @@ SECTIONS
 		__bss_end = .;
 	}
 
-	/DISCARD/ : { *(.bss*) }
-	/DISCARD/ : { *(.dynsym) }
-	/DISCARD/ : { *(.dynstr*) }
-	/DISCARD/ : { *(.dynsym*) }
-	/DISCARD/ : { *(.dynamic*) }
-	/DISCARD/ : { *(.hash*) }
-	/DISCARD/ : { *(.plt*) }
-	/DISCARD/ : { *(.interp*) }
-	/DISCARD/ : { *(.gnu*) }
+	.dynsym _end : { *(.dynsym) }
+	.dynbss : { *(.dynbss) }
+	.dynstr : { *(.dynstr*) }
+	.dynamic : { *(.dynamic*) }
+	.hash : { *(.hash*) }
+	.plt : { *(.plt*) }
+	.interp : { *(.interp*) }
+	.gnu : { *(.gnu*) }
+	.ARM.exidx : { *(.ARM.exidx*) }
 }
diff --git a/boards.cfg b/boards.cfg
index 114cc86d00..2128996a1e 100644
--- a/boards.cfg
+++ b/boards.cfg
@@ -119,6 +119,7 @@ Active  arm         arm926ejs      at91        calao           tny_a9260
 Active  arm         arm926ejs      at91        calao           tny_a9260           tny_a9260_nandflash                  tny_a9260:AT91SAM9260,SYS_USE_NANDFLASH                                                                                           Albin Tonnerre <albin.tonnerre@free-electrons.com>
 Active  arm         arm926ejs      at91        calao           tny_a9260           tny_a9g20_eeprom                     tny_a9260:AT91SAM9G20,SYS_USE_EEPROM                                                                                              Albin Tonnerre <albin.tonnerre@free-electrons.com>
 Active  arm         arm926ejs      at91        calao           tny_a9260           tny_a9g20_nandflash                  tny_a9260:AT91SAM9G20,SYS_USE_NANDFLASH                                                                                           Albin Tonnerre <albin.tonnerre@free-electrons.com>
+Active  arm         arm926ejs      at91        calao           usb_a9263           usb_a9263_dataflash                  usb_a9263:AT91SAM9263,SYS_USE_DATAFLASH                                                                                           Mateusz Kulikowski <mateusz.kulikowski@gmail.com>
 Active  arm         arm926ejs      at91        egnite          ethernut5           ethernut5                            ethernut5:AT91SAM9XE                                                                                                              egnite GmbH <info@egnite.de>
 Active  arm         arm926ejs      at91        emk             top9000             top9000eval_xe                       top9000:EVAL9000                                                                                                                  Reinhard Meyer <reinhard.meyer@emk-elektronik.de>
 Active  arm         arm926ejs      at91        emk             top9000             top9000su_xe                         top9000:SU9000                                                                                                                    Reinhard Meyer <reinhard.meyer@emk-elektronik.de>
@@ -139,6 +140,9 @@ Active  arm         arm926ejs      at91        ronetix         pm9263
 Active  arm         arm926ejs      at91        ronetix         pm9g45              pm9g45                               pm9g45:AT91SAM9G45                                                                                                                Ilko Iliev <iliev@ronetix.at>
 Active  arm         arm926ejs      at91        taskit          stamp9g20           portuxg20                            stamp9g20:AT91SAM9G20,PORTUXG20                                                                                                   Markus Hubig <mhubig@imko.de>
 Active  arm         arm926ejs      at91        taskit          stamp9g20           stamp9g20                            stamp9g20:AT91SAM9G20                                                                                                             Markus Hubig <mhubig@imko.de>
+Active  arm         arm926ejs      at91        siemens         taurus              axm                                  taurus:AT91SAM9G20,MACH_TYPE=2068,BOARD_AXM                                                                                       Heiko Schocher <hs@denx.de>
+Active  arm         arm926ejs      at91        siemens         corvus              corvus                               corvus:AT91SAM9M10G45,SYS_USE_NANDFLASH                                                                                           Heiko Schocher <hs@denx.de>
+Active  arm         arm926ejs      at91        siemens         taurus              taurus                               taurus:AT91SAM9G20,MACH_TYPE=2067,BOARD_TAURUS                                                                                    Heiko Schocher <hs@denx.de>
 Active  arm         arm926ejs      davinci     ait             cam_enc_4xx         cam_enc_4xx                          cam_enc_4xx                                                                                                                       Heiko Schocher <hs@denx.de>
 Active  arm         arm926ejs      davinci     Barix           ipam390             ipam390                              -                                                                                                                                 Heiko Schocher <hs@denx.de>
 Active  arm         arm926ejs      davinci     davinci         da8xxevm            da830evm                             -                                                                                                                                 Nick Thompson <nick.thompson@gefanuc.com>
@@ -213,9 +217,6 @@ Active  arm         arm926ejs      mxs         schulercontrol  sc_sps_1
 Active  arm         arm926ejs      nomadik     st              nhk8815             nhk8815                              -                                                                                                                                 Nomadik Linux Team <STN_WMM_nomadik_linux@list.st.com>:Alessandro Rubini <rubini@unipv.it>
 Active  arm         arm926ejs      nomadik     st              nhk8815             nhk8815_onenand                      nhk8815:BOOT_ONENAND                                                                                                              Nomadik Linux Team <STN_WMM_nomadik_linux@list.st.com>:Alessandro Rubini <rubini@unipv.it>
 Active  arm         arm926ejs      omap        ti              -                   omap5912osk                          -                                                                                                                                 Rishi Bhattacharya <rishi@ti.com>
-Active  arm         arm926ejs      omap        ti              omap730p2           omap730p2                            omap730p2:CS3_BOOT                                                                                                                Dave Peverley <dpeverley@mpc-data.co.uk>
-Active  arm         arm926ejs      omap        ti              omap730p2           omap730p2_cs0boot                    omap730p2:CS0_BOOT                                                                                                                Dave Peverley <dpeverley@mpc-data.co.uk>
-Active  arm         arm926ejs      omap        ti              omap730p2           omap730p2_cs3boot                    omap730p2:CS3_BOOT                                                                                                                Dave Peverley <dpeverley@mpc-data.co.uk>
 Active  arm         arm926ejs      orion5x     LaCie           -                   edminiv2                             -                                                                                                                                 Albert ARIBAUD <albert.u.boot@aribaud.net>
 Active  arm         arm926ejs      pantheon    Marvell         -                   dkb                                  -                                                                                                                                 Lei Wen <leiwen@marvell.com>
 Active  arm         arm926ejs      spear       spear           -                   x600                                 x600                                                                                                                              Stefan Roese <sr@denx.de>
@@ -247,8 +248,10 @@ Active  arm         arm946es       -           armltd          integrator
 Active  arm         armv7          -           armltd          vexpress            vexpress_ca15_tc2                    -                                                                                                                                 -
 Active  arm         armv7          -           armltd          vexpress            vexpress_ca5x2                       -                                                                                                                                 Matt Waddel <matt.waddel@linaro.org>
 Active  arm         armv7          -           armltd          vexpress            vexpress_ca9x4                       -                                                                                                                                 Matt Waddel <matt.waddel@linaro.org>
+Active  arm         armv7          am33xx      compulab        cm_t335             cm_t335                              cm_t335                                                                                                                           Igor Grinberg <grinberg@compulab.co.il>
 Active  arm         armv7          am33xx      isee            igep0033            am335x_igep0033                      -                                                                                                                                 Enric Balletbo i Serra <eballetbo@iseebcn.com>
-Active  arm         armv7          am33xx      phytec          pcm051              pcm051                               pcm051                                                                                                                            Lars Poeschel <poeschel@lemonage.de>
+Active  arm         armv7          am33xx      phytec          pcm051              pcm051_rev1                          pcm051:REV1                                                                                                                       Lars Poeschel <poeschel@lemonage.de>
+Active  arm         armv7          am33xx      phytec          pcm051              pcm051_rev3                          pcm051:REV3                                                                                                                       Lars Poeschel <poeschel@lemonage.de>
 Active  arm         armv7          am33xx      siemens         dxr2                dxr2                                 -                                                                                                                                 Roger Meier <r.meier@siemens.com>
 Active  arm         armv7          am33xx      siemens         pxm2                pxm2                                 -                                                                                                                                 Roger Meier <r.meier@siemens.com>
 Active  arm         armv7          am33xx      siemens         rut                 rut                                  -                                                                                                                                 Roger Meier <r.meier@siemens.com>
@@ -257,14 +260,14 @@ Active  arm         armv7          am33xx      ti              am335x
 Active  arm         armv7          am33xx      ti              am335x              am335x_evm_nor                       am335x_evm:SERIAL1,CONS_INDEX=1,NAND,NOR                                                                                          Tom Rini <trini@ti.com>
 Active  arm         armv7          am33xx      ti              am335x              am335x_evm_norboot                   am335x_evm:SERIAL1,CONS_INDEX=1,NOR,NOR_BOOT                                                                                      Tom Rini <trini@ti.com>
 Active  arm         armv7          am33xx      ti              am335x              am335x_evm_spiboot                   am335x_evm:SERIAL1,CONS_INDEX=1,SPI_BOOT                                                                                          Tom Rini <trini@ti.com>
-Active  arm         armv7          am33xx      ti              am335x              am335x_evm_uart1                     am335x_evm:SERIAL2,CONS_INDEX=1,NAND                                                                                              Tom Rini <trini@ti.com>
-Active  arm         armv7          am33xx      ti              am335x              am335x_evm_uart2                     am335x_evm:SERIAL3,CONS_INDEX=1,NAND                                                                                              Tom Rini <trini@ti.com>
-Active  arm         armv7          am33xx      ti              am335x              am335x_evm_uart3                     am335x_evm:SERIAL4,CONS_INDEX=1,NAND                                                                                              Tom Rini <trini@ti.com>
-Active  arm         armv7          am33xx      ti              am335x              am335x_evm_uart4                     am335x_evm:SERIAL5,CONS_INDEX=1,NAND                                                                                              Tom Rini <trini@ti.com>
-Active  arm         armv7          am33xx      ti              am335x              am335x_evm_uart5                     am335x_evm:SERIAL6,CONS_INDEX=1,NAND                                                                                              Tom Rini <trini@ti.com>
+Active  arm         armv7          am33xx      ti              am335x              am335x_evm_uart1                     am335x_evm:SERIAL2,CONS_INDEX=2,NAND                                                                                              Tom Rini <trini@ti.com>
+Active  arm         armv7          am33xx      ti              am335x              am335x_evm_uart2                     am335x_evm:SERIAL3,CONS_INDEX=3,NAND                                                                                              Tom Rini <trini@ti.com>
+Active  arm         armv7          am33xx      ti              am335x              am335x_evm_uart3                     am335x_evm:SERIAL4,CONS_INDEX=4,NAND                                                                                              Tom Rini <trini@ti.com>
+Active  arm         armv7          am33xx      ti              am335x              am335x_evm_uart4                     am335x_evm:SERIAL5,CONS_INDEX=5,NAND                                                                                              Tom Rini <trini@ti.com>
+Active  arm         armv7          am33xx      ti              am335x              am335x_evm_uart5                     am335x_evm:SERIAL6,CONS_INDEX=6,NAND                                                                                              Tom Rini <trini@ti.com>
 Active  arm         armv7          am33xx      ti              am335x              am335x_evm_usbspl                    am335x_evm:SERIAL1,CONS_INDEX=1,NAND,SPL_USBETH_SUPPORT                                                                           Tom Rini <trini@ti.com>
 Active  arm         armv7          am33xx      ti              am43xx              am43xx_evm                           am43xx_evm:SERIAL1,CONS_INDEX=1                                                                                                   -
-Active  arm         armv7          am33xx      ti              ti814x              ti814x_evm                           -                                                                                                                                 Matt Porter <mporter@ti.com>
+Active  arm         armv7          am33xx      ti              ti814x              ti814x_evm                           -                                                                                                                                 Matt Porter <matt.porter@linaro.org>
 Active  arm         armv7          am33xx      ti              ti816x              ti816x_evm                           -                                                                                                                                 -
 Active  arm         armv7          at91        atmel           sama5d3xek          sama5d3xek_mmc                       sama5d3xek:SAMA5D3,SYS_USE_MMC                                                                                                    Bo Shen <voice.shen@atmel.com>
 Active  arm         armv7          at91        atmel           sama5d3xek          sama5d3xek_nandflash                 sama5d3xek:SAMA5D3,SYS_USE_NANDFLASH                                                                                              Bo Shen <voice.shen@atmel.com>
@@ -341,6 +344,10 @@ Active  arm         armv7          omap5       ti              dra7xx
 Active  arm         armv7          omap5       ti              omap5_uevm          omap5_uevm                           -                                                                                                                                 -
 Active  arm         armv7          rmobile     atmark-techno   armadillo-800eva    armadillo-800eva                     -                                                                                                                                 Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com>
 Active  arm         armv7          rmobile     kmc             kzm9g               kzm9g                                -                                                                                                                                 Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com>:Tetsuyuki Kobayashi <koba@kmckk.co.jp>
+Active  arm         armv7          rmobile     renesas         lager               lager                                -                                                                                                                                 Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com>
+Active  arm         armv7          rmobile     renesas         lager               lager_nor                            lager:NORFLASH                                                                                                                    Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com>
+Active  arm         armv7          rmobile     renesas         koelsch             koelsch                              -                                                                                                                                 Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com>
+Active  arm         armv7          rmobile     renesas         koelsch             koelsch_nor                          koelsch:NORFLASH                                                                                                                  Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com>
 Active  arm         armv7          s5pc1xx     samsung         goni                s5p_goni                             -                                                                                                                                 Minkyu Kang <mk7.kang@samsung.com>
 Active  arm         armv7          s5pc1xx     samsung         smdkc100            smdkc100                             -                                                                                                                                 Minkyu Kang <mk7.kang@samsung.com>
 Active  arm         armv7          socfpga     altera          socfpga             socfpga_cyclone5                     -                                                                                                                                 -
diff --git a/doc/README.at91-soc b/doc/README.at91-soc
index bed035c88d..ab3f713422 100644
--- a/doc/README.at91-soc
+++ b/doc/README.at91-soc
@@ -39,3 +39,10 @@ The method for updating
 3. add new structures for SoC access
 4. Convert arch, driver and boards file to new SoC
 5. remove legacy code, if all boards and drives are ready
+
+2013-10-30 Andreas Bießmann <andreas.devel@googlemail.com>:
+
+The goal is almost reached, we could remove the CONFIG_AT91_LEGACY switch but
+remain the CONFIG_ATMEL_LEGACY switch until the GPIO disaster is fixed. The
+AT91 spi driver has also some CONFIG_ATMEL_LEGACY stuff left, so another point
+to fix until this README can be removed.
diff --git a/doc/README.scrapyard b/doc/README.scrapyard
index f045f433f6..604de0c8a7 100644
--- a/doc/README.scrapyard
+++ b/doc/README.scrapyard
@@ -11,9 +11,10 @@ easily if here is something they might want to dig for...
 
 Board            Arch        CPU            Commit      Removed     Last known maintainer/contact
 =================================================================================================
+omap730p2        arm         arm926ejs      -           2013-11-11
 pn62             powerpc     mpc824x        -           2013-11-11  Wolfgang Grandegger <wg@grandegger.com>
-pdnb3            arm         ixp            -           2013-09-24  Stefan Roese <sr@denx.de>
-scpu             arm         ixp            -           2013-09-24  Stefan Roese <sr@denx.de>
+pdnb3            arm         ixp            304db0b     2013-09-24  Stefan Roese <sr@denx.de>
+scpu             arm         ixp            304db0b     2013-09-24  Stefan Roese <sr@denx.de>
 omap1510inn      arm         arm925t        0610a16     2013-09-23  Kshitij Gupta <kshitij@ti.com>
 CANBT            powerpc     405CR          fb8f4fd     2013-08-07  Matthias Fuchs <matthias.fuchs@esd.eu>
 Alaska8220       powerpc     mpc8220        d6ed322     2013-05-11
diff --git a/drivers/block/ahci.c b/drivers/block/ahci.c
index 0daad364d7..e64df4f98d 100644
--- a/drivers/block/ahci.c
+++ b/drivers/block/ahci.c
@@ -379,6 +379,11 @@ static int ahci_init_one(pci_dev_t pdev)
 	int rc;
 
 	probe_ent = malloc(sizeof(struct ahci_probe_ent));
+	if (!probe_ent) {
+		printf("%s: No memory for probe_ent\n", __func__);
+		return -ENOMEM;
+	}
+
 	memset(probe_ent, 0, sizeof(struct ahci_probe_ent));
 	probe_ent->dev = pdev;
 
@@ -503,7 +508,7 @@ static int ahci_port_start(u8 port)
 	mem = (u32) malloc(AHCI_PORT_PRIV_DMA_SZ + 2048);
 	if (!mem) {
 		free(pp);
-		printf("No mem for table!\n");
+		printf("%s: No mem for table!\n", __func__);
 		return -ENOMEM;
 	}
 
@@ -618,7 +623,7 @@ static int ata_scsiop_inquiry(ccb *pccb)
 		95 - 4,
 	};
 	u8 fis[20];
-	u16 *tmpid;
+	ALLOC_CACHE_ALIGN_BUFFER(u16, tmpid, ATA_ID_WORDS);
 	u8 port;
 
 	/* Clean ccb data buffer */
@@ -637,14 +642,10 @@ static int ata_scsiop_inquiry(ccb *pccb)
 
 	/* Read id from sata */
 	port = pccb->target;
-	tmpid = malloc(ATA_ID_WORDS * 2);
-	if (!tmpid)
-		return -ENOMEM;
 
 	if (ahci_device_data_io(port, (u8 *) &fis, sizeof(fis), (u8 *)tmpid,
 				ATA_ID_WORDS * 2, 0)) {
 		debug("scsi_ahci: SCSI inquiry command failure.\n");
-		free(tmpid);
 		return -EIO;
 	}
 
@@ -889,6 +890,11 @@ int ahci_init(u32 base)
 	u32 linkmap;
 
 	probe_ent = malloc(sizeof(struct ahci_probe_ent));
+	if (!probe_ent) {
+		printf("%s: No memory for probe_ent\n", __func__);
+		return -ENOMEM;
+	}
+
 	memset(probe_ent, 0, sizeof(struct ahci_probe_ent));
 
 	probe_ent->host_flags = ATA_FLAG_SATA
diff --git a/drivers/bootcount/Makefile b/drivers/bootcount/Makefile
index 8256ed0f46..bed6971aa5 100644
--- a/drivers/bootcount/Makefile
+++ b/drivers/bootcount/Makefile
@@ -6,5 +6,6 @@ obj-y				+= bootcount.o
 obj-$(CONFIG_AT91SAM9XE)	+= bootcount_at91.o
 obj-$(CONFIG_BLACKFIN)		+= bootcount_blackfin.o
 obj-$(CONFIG_SOC_DA8XX)		+= bootcount_davinci.o
-obj-$(CONFIG_AM33XX)		+= bootcount_davinci.o
+obj-$(CONFIG_BOOTCOUNT_AM33XX)	+= bootcount_davinci.o
 obj-$(CONFIG_BOOTCOUNT_RAM)	+= bootcount_ram.o
+obj-$(CONFIG_BOOTCOUNT_ENV)	+= bootcount_env.o
diff --git a/drivers/bootcount/bootcount_davinci.c b/drivers/bootcount/bootcount_davinci.c
index f0acfad805..fa87b5e7b9 100644
--- a/drivers/bootcount/bootcount_davinci.c
+++ b/drivers/bootcount/bootcount_davinci.c
@@ -2,6 +2,10 @@
  * (C) Copyright 2011
  * Heiko Schocher, DENX Software Engineering, hs@denx.de.
  *
+ * A bootcount driver for the RTC IP block found on many TI platforms.
+ * This requires the RTC clocks, etc, to be enabled prior to use and
+ * not all boards with this IP block on it will have the RTC in use.
+ *
  * SPDX-License-Identifier:	GPL-2.0+
  */
 
diff --git a/drivers/bootcount/bootcount_env.c b/drivers/bootcount/bootcount_env.c
new file mode 100644
index 0000000000..2d6e8db126
--- /dev/null
+++ b/drivers/bootcount/bootcount_env.c
@@ -0,0 +1,29 @@
+/*
+ * (C) Copyright 2013
+ * Heiko Schocher, DENX Software Engineering, hs@denx.de.
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#include <common.h>
+
+void bootcount_store(ulong a)
+{
+	int upgrade_available = getenv_ulong("upgrade_available", 10, 0);
+
+	if (upgrade_available) {
+		setenv_ulong("bootcount", a);
+		saveenv();
+	}
+}
+
+ulong bootcount_load(void)
+{
+	int upgrade_available = getenv_ulong("upgrade_available", 10, 0);
+	ulong val = 0;
+
+	if (upgrade_available)
+		val = getenv_ulong("bootcount", 10, 0);
+
+	return val;
+}
diff --git a/drivers/gpio/at91_gpio.c b/drivers/gpio/at91_gpio.c
index af0978675e..8b766665c6 100644
--- a/drivers/gpio/at91_gpio.c
+++ b/drivers/gpio/at91_gpio.c
@@ -14,6 +14,7 @@
 #include <asm/sizes.h>
 #include <asm/arch/hardware.h>
 #include <asm/arch/at91_pio.h>
+#include <asm/arch/gpio.h>
 
 static struct at91_port *at91_pio_get_port(unsigned port)
 {
@@ -356,9 +357,6 @@ int at91_get_pio_value(unsigned port, unsigned pin)
 
 /* Common GPIO API */
 
-#define at91_gpio_to_port(gpio)		(gpio / 32)
-#define at91_gpio_to_pin(gpio)		(gpio % 32)
-
 int gpio_request(unsigned gpio, const char *label)
 {
 	return 0;
diff --git a/drivers/i2c/soft_i2c.c b/drivers/i2c/soft_i2c.c
index 396fea89af..dfea54ae73 100644
--- a/drivers/i2c/soft_i2c.c
+++ b/drivers/i2c/soft_i2c.c
@@ -25,7 +25,7 @@
 #include <asm/io.h>
 #include <asm/arch/hardware.h>
 #include <asm/arch/at91_pio.h>
-#ifdef CONFIG_AT91_LEGACY
+#ifdef CONFIG_ATMEL_LEGACY
 #include <asm/arch/gpio.h>
 #endif
 #endif
diff --git a/drivers/mtd/nand/atmel_nand.c b/drivers/mtd/nand/atmel_nand.c
index 16b7df0f72..05ddfbb644 100644
--- a/drivers/mtd/nand/atmel_nand.c
+++ b/drivers/mtd/nand/atmel_nand.c
@@ -12,9 +12,8 @@
  */
 
 #include <common.h>
-#include <asm/arch/hardware.h>
+#include <asm/gpio.h>
 #include <asm/arch/gpio.h>
-#include <asm/arch/at91_pio.h>
 
 #include <malloc.h>
 #include <nand.h>
@@ -1154,8 +1153,7 @@ static void at91_nand_hwcontrol(struct mtd_info *mtd,
 			IO_ADDR_W |= CONFIG_SYS_NAND_MASK_ALE;
 
 #ifdef CONFIG_SYS_NAND_ENABLE_PIN
-		at91_set_gpio_value(CONFIG_SYS_NAND_ENABLE_PIN,
-				    !(ctrl & NAND_NCE));
+		gpio_set_value(CONFIG_SYS_NAND_ENABLE_PIN, !(ctrl & NAND_NCE));
 #endif
 		this->IO_ADDR_W = (void *) IO_ADDR_W;
 	}
@@ -1167,7 +1165,7 @@ static void at91_nand_hwcontrol(struct mtd_info *mtd,
 #ifdef CONFIG_SYS_NAND_READY_PIN
 static int at91_nand_ready(struct mtd_info *mtd)
 {
-	return at91_get_gpio_value(CONFIG_SYS_NAND_READY_PIN);
+	return gpio_get_value(CONFIG_SYS_NAND_READY_PIN);
 }
 #endif
 
diff --git a/drivers/net/at91_emac.c b/drivers/net/at91_emac.c
index 73612ea069..64d4c56ac5 100644
--- a/drivers/net/at91_emac.c
+++ b/drivers/net/at91_emac.c
@@ -10,19 +10,10 @@
 
 #include <common.h>
 #include <asm/io.h>
-#ifndef CONFIG_AT91_LEGACY
 #include <asm/arch/hardware.h>
 #include <asm/arch/at91_emac.h>
 #include <asm/arch/at91_pmc.h>
 #include <asm/arch/at91_pio.h>
-#else
-/* remove next 5 lines, if all RM9200 boards convert to at91 arch */
-#include <asm/arch-at91/at91rm9200.h>
-#include <asm/arch-at91/hardware.h>
-#include <asm/arch-at91/at91_emac.h>
-#include <asm/arch-at91/at91_pmc.h>
-#include <asm/arch-at91/at91_pio.h>
-#endif
 #include <net.h>
 #include <netdev.h>
 #include <malloc.h>
diff --git a/drivers/net/cpsw.c b/drivers/net/cpsw.c
index 39240d9662..50167aab63 100644
--- a/drivers/net/cpsw.c
+++ b/drivers/net/cpsw.c
@@ -914,7 +914,7 @@ static int cpsw_recv(struct eth_device *dev)
 	void *buffer;
 	int len;
 
-	cpsw_update_link(priv);
+	cpsw_check_link(priv);
 
 	while (cpdma_process(priv, &priv->rx_chan, &buffer, &len) >= 0) {
 		invalidate_dcache_range((unsigned long)buffer,
diff --git a/drivers/power/twl6030.c b/drivers/power/twl6030.c
index 0858b60e06..a1c6663a2e 100644
--- a/drivers/power/twl6030.c
+++ b/drivers/power/twl6030.c
@@ -9,6 +9,26 @@
 
 #include <twl6030.h>
 
+static struct twl6030_data *twl;
+
+static struct twl6030_data twl6030_info = {
+	.chip_type	= chip_TWL6030,
+	.adc_rbase	= GPCH0_LSB,
+	.adc_ctrl	= CTRL_P2,
+	.adc_enable	= CTRL_P2_SP2,
+	.vbat_mult	= TWL6030_VBAT_MULT,
+	.vbat_shift	= TWL6030_VBAT_SHIFT,
+};
+
+static struct twl6030_data twl6032_info = {
+	.chip_type	= chip_TWL6032,
+	.adc_rbase	= TWL6032_GPCH0_LSB,
+	.adc_ctrl	= TWL6032_CTRL_P1,
+	.adc_enable	= CTRL_P1_SP1,
+	.vbat_mult	= TWL6032_VBAT_MULT,
+	.vbat_shift	= TWL6032_VBAT_SHIFT,
+};
+
 static int twl6030_gpadc_read_channel(u8 channel_no)
 {
 	u8 lsb = 0;
@@ -16,12 +36,12 @@ static int twl6030_gpadc_read_channel(u8 channel_no)
 	int ret = 0;
 
 	ret = twl6030_i2c_read_u8(TWL6030_CHIP_ADC,
-				  GPCH0_LSB + channel_no * 2, &lsb);
+				  twl->adc_rbase + channel_no * 2, &lsb);
 	if (ret)
 		return ret;
 
 	ret = twl6030_i2c_read_u8(TWL6030_CHIP_ADC,
-				  GPCH0_MSB + channel_no * 2, &msb);
+				  twl->adc_rbase + 1 + channel_no * 2, &msb);
 	if (ret)
 		return ret;
 
@@ -33,7 +53,8 @@ static int twl6030_gpadc_sw2_trigger(void)
 	u8 val;
 	int ret = 0;
 
-	ret = twl6030_i2c_write_u8(TWL6030_CHIP_ADC, CTRL_P2, CTRL_P2_SP2);
+	ret = twl6030_i2c_write_u8(TWL6030_CHIP_ADC,
+				   twl->adc_ctrl, twl->adc_enable);
 	if (ret)
 		return ret;
 
@@ -41,7 +62,8 @@ static int twl6030_gpadc_sw2_trigger(void)
 	val =  CTRL_P2_BUSY;
 
 	while (!((val & CTRL_P2_EOCP2) && (!(val & CTRL_P2_BUSY)))) {
-		ret = twl6030_i2c_read_u8(TWL6030_CHIP_ADC, CTRL_P2, &val);
+		ret = twl6030_i2c_read_u8(TWL6030_CHIP_ADC,
+					  twl->adc_ctrl, &val);
 		if (ret)
 			return ret;
 		udelay(1000);
@@ -102,6 +124,18 @@ int twl6030_get_battery_voltage(void)
 {
 	int battery_volt = 0;
 	int ret = 0;
+	u8 vbatch;
+
+	if (twl->chip_type == chip_TWL6030) {
+		vbatch = TWL6030_GPADC_VBAT_CHNL;
+	} else {
+		ret = twl6030_i2c_write_u8(TWL6030_CHIP_ADC,
+					   TWL6032_GPSELECT_ISB,
+					   TWL6032_GPADC_VBAT_CHNL);
+		if (ret)
+			return ret;
+		vbatch = 0;
+	}
 
 	/* Start GPADC SW conversion */
 	ret = twl6030_gpadc_sw2_trigger();
@@ -111,12 +145,12 @@ int twl6030_get_battery_voltage(void)
 	}
 
 	/* measure Vbat voltage */
-	battery_volt = twl6030_gpadc_read_channel(7);
+	battery_volt = twl6030_gpadc_read_channel(vbatch);
 	if (battery_volt < 0) {
 		printf("Failed to read battery voltage\n");
 		return ret;
 	}
-	battery_volt = (battery_volt * 25 * 1000) >> (10 + 2);
+	battery_volt = (battery_volt * twl->vbat_mult) >> twl->vbat_shift;
 	printf("Battery Voltage: %d mV\n", battery_volt);
 
 	return battery_volt;
@@ -124,12 +158,35 @@ int twl6030_get_battery_voltage(void)
 
 void twl6030_init_battery_charging(void)
 {
-	u8 stat1 = 0;
+	u8 val = 0;
 	int battery_volt = 0;
 	int ret = 0;
 
+	ret = twl6030_i2c_read_u8(TWL6030_CHIP_USB, USB_PRODUCT_ID_LSB, &val);
+	if (ret) {
+		puts("twl6030_init_battery_charging(): could not determine chip!\n");
+		return;
+	}
+	if (val == 0x30) {
+		twl = &twl6030_info;
+	} else if (val == 0x32) {
+		twl = &twl6032_info;
+	} else {
+		puts("twl6030_init_battery_charging(): unsupported chip type\n");
+		return;
+	}
+
 	/* Enable VBAT measurement */
-	twl6030_i2c_write_u8(TWL6030_CHIP_PM, MISC1, VBAT_MEAS);
+	if (twl->chip_type == chip_TWL6030) {
+		twl6030_i2c_write_u8(TWL6030_CHIP_PM, MISC1, VBAT_MEAS);
+		twl6030_i2c_write_u8(TWL6030_CHIP_ADC,
+				     TWL6030_GPADC_CTRL,
+				     GPADC_CTRL_SCALER_DIV4);
+	} else {
+		twl6030_i2c_write_u8(TWL6030_CHIP_ADC,
+				     TWL6032_GPADC_CTRL2,
+				     GPADC_CTRL2_CH18_SCALER_EN);
+	}
 
 	/* Enable GPADC module */
 	ret = twl6030_i2c_write_u8(TWL6030_CHIP_CHARGER, TOGGLE1, FGS | GPADCS);
@@ -146,10 +203,10 @@ void twl6030_init_battery_charging(void)
 		printf("Main battery voltage too low!\n");
 
 	/* Check for the presence of USB charger */
-	twl6030_i2c_read_u8(TWL6030_CHIP_CHARGER, CONTROLLER_STAT1, &stat1);
+	twl6030_i2c_read_u8(TWL6030_CHIP_CHARGER, CONTROLLER_STAT1, &val);
 
 	/* check for battery presence indirectly via Fuel gauge */
-	if ((stat1 & VBUS_DET) && (battery_volt < 3300))
+	if ((val & VBUS_DET) && (battery_volt < 3300))
 		twl6030_start_usb_charging();
 
 	return;
diff --git a/drivers/usb/gadget/g_dnl.c b/drivers/usb/gadget/g_dnl.c
index 8dc3d9f8a8..dd95afe86a 100644
--- a/drivers/usb/gadget/g_dnl.c
+++ b/drivers/usb/gadget/g_dnl.c
@@ -147,6 +147,23 @@ int g_dnl_bind_fixup(struct usb_device_descriptor *dev, const char *name)
 	return 0;
 }
 
+__weak int g_dnl_get_board_bcd_device_number(int gcnum)
+{
+	return gcnum;
+}
+
+static int g_dnl_get_bcd_device_number(struct usb_composite_dev *cdev)
+{
+	struct usb_gadget *gadget = cdev->gadget;
+	int gcnum;
+
+	gcnum = usb_gadget_controller_number(gadget);
+	if (gcnum > 0)
+		gcnum += 0x200;
+
+	return g_dnl_get_board_bcd_device_number(gcnum);
+}
+
 static int g_dnl_bind(struct usb_composite_dev *cdev)
 {
 	struct usb_gadget *gadget = cdev->gadget;
@@ -181,11 +198,9 @@ static int g_dnl_bind(struct usb_composite_dev *cdev)
 	if (ret)
 		goto error;
 
-	gcnum = usb_gadget_controller_number(gadget);
-
-	debug("gcnum: %d\n", gcnum);
+	gcnum = g_dnl_get_bcd_device_number(cdev);
 	if (gcnum >= 0)
-		device_desc.bcdDevice = cpu_to_le16(0x0200 + gcnum);
+		device_desc.bcdDevice = cpu_to_le16(gcnum);
 	else {
 		debug("%s: controller '%s' not recognized\n",
 			shortname, gadget->name);
diff --git a/drivers/usb/gadget/regs-otg.h b/drivers/usb/gadget/regs-otg.h
index 84bfcc5a01..ac5d11213d 100644
--- a/drivers/usb/gadget/regs-otg.h
+++ b/drivers/usb/gadget/regs-otg.h
@@ -226,6 +226,11 @@ struct s3c_usbotg_reg {
 #define CLK_SEL_12MHZ                   (0x2 << 0)
 #define CLK_SEL_48MHZ                   (0x0 << 0)
 
+#define EXYNOS4X12_ID_PULLUP0		(0x01 << 3)
+#define EXYNOS4X12_COMMON_ON_N0	(0x01 << 4)
+#define EXYNOS4X12_CLK_SEL_12MHZ	(0x02 << 0)
+#define EXYNOS4X12_CLK_SEL_24MHZ	(0x05 << 0)
+
 /* Device Configuration Register DCFG */
 #define DEV_SPEED_HIGH_SPEED_20         (0x0 << 0)
 #define DEV_SPEED_FULL_SPEED_20         (0x1 << 0)
diff --git a/drivers/usb/gadget/s3c_udc_otg.c b/drivers/usb/gadget/s3c_udc_otg.c
index 7e2020915e..ba17a04265 100644
--- a/drivers/usb/gadget/s3c_udc_otg.c
+++ b/drivers/usb/gadget/s3c_udc_otg.c
@@ -167,8 +167,13 @@ void otg_phy_init(struct s3c_udc *dev)
 		writel((readl(&phy->phypwr) &~(OTG_DISABLE_0 | ANALOG_PWRDOWN)
 			&~FORCE_SUSPEND_0), &phy->phypwr);
 
-	writel((readl(&phy->phyclk) &~(ID_PULLUP0 | COMMON_ON_N0)) |
-	       CLK_SEL_24MHZ, &phy->phyclk); /* PLL 24Mhz */
+	if (s5p_cpu_id == 0x4412)
+		writel((readl(&phy->phyclk) & ~(EXYNOS4X12_ID_PULLUP0 |
+			EXYNOS4X12_COMMON_ON_N0)) | EXYNOS4X12_CLK_SEL_24MHZ,
+		       &phy->phyclk); /* PLL 24Mhz */
+	else
+		writel((readl(&phy->phyclk) & ~(ID_PULLUP0 | COMMON_ON_N0)) |
+		       CLK_SEL_24MHZ, &phy->phyclk); /* PLL 24Mhz */
 
 	writel((readl(&phy->rstcon) &~(LINK_SW_RST | PHYLNK_SW_RST))
 	       | PHY_SW_RST0, &phy->rstcon);
diff --git a/drivers/usb/host/ehci-omap.c b/drivers/usb/host/ehci-omap.c
index c4ce487087..1b215c25f6 100644
--- a/drivers/usb/host/ehci-omap.c
+++ b/drivers/usb/host/ehci-omap.c
@@ -28,21 +28,48 @@ static struct omap_ehci *const ehci = (struct omap_ehci *)OMAP_EHCI_BASE;
 
 static int omap_uhh_reset(void)
 {
-/*
- * Soft resetting the UHH module causes instability issues on
- * all OMAPs so we just avoid it.
- *
- * See OMAP36xx Errata
- *  i571: USB host EHCI may stall when entering smart-standby mode
- *  i660: USBHOST Configured In Smart-Idle Can Lead To a Deadlock
- *
- * On OMAP4/5, soft-resetting the UHH module will put it into
- * Smart-Idle mode and lead to a deadlock.
- *
- * On OMAP3, this doesn't seem to be the case but still instabilities
- * are observed on beagle (3530 ES1.0) if soft-reset is used.
- * e.g. NFS root failures with Linux kernel.
- */
+	int timeout = 0;
+	u32 rev;
+
+	rev = readl(&uhh->rev);
+
+	/* Soft RESET */
+	writel(OMAP_UHH_SYSCONFIG_SOFTRESET, &uhh->sysc);
+
+	switch (rev) {
+	case OMAP_USBHS_REV1:
+		/* Wait for soft RESET to complete */
+		while (!(readl(&uhh->syss) & 0x1)) {
+			if (timeout > 100) {
+				printf("%s: RESET timeout\n", __func__);
+				return -1;
+			}
+			udelay(10);
+			timeout++;
+		}
+
+		/* Set No-Idle, No-Standby */
+		writel(OMAP_UHH_SYSCONFIG_VAL, &uhh->sysc);
+		break;
+
+	default:	/* Rev. 2 onwards */
+
+		udelay(2); /* Need to wait before accessing SYSCONFIG back */
+
+		/* Wait for soft RESET to complete */
+		while ((readl(&uhh->sysc) & 0x1)) {
+			if (timeout > 100) {
+				printf("%s: RESET timeout\n", __func__);
+				return -1;
+			}
+			udelay(10);
+			timeout++;
+		}
+
+		writel(OMAP_UHH_SYSCONFIG_VAL, &uhh->sysc);
+		break;
+	}
+
 	return 0;
 }
 
diff --git a/drivers/video/bus_vcxk.c b/drivers/video/bus_vcxk.c
index 0138bca05e..60a5cc5b71 100644
--- a/drivers/video/bus_vcxk.c
+++ b/drivers/video/bus_vcxk.c
@@ -20,7 +20,6 @@ vu_long  *vcxk_bws_long = ((vu_long *) (CONFIG_SYS_VCXK_BASE));
 	#ifndef VCBITMASK
 		#define VCBITMASK(bitno)	(0x0001 << (bitno % 16))
 	#endif
-#ifndef CONFIG_AT91_LEGACY
 at91_pio_t *pio = (at91_pio_t *) AT91_PIO_BASE;
 #define VCXK_INIT_PIN(PORT, PIN, DDR, I0O1) \
 	do { \
@@ -37,20 +36,6 @@ at91_pio_t *pio = (at91_pio_t *) AT91_PIO_BASE;
 #define VCXK_ACKNOWLEDGE	\
 	(!(readl(&pio->CONFIG_SYS_VCXK_ACKNOWLEDGE_PORT.pdsr) & \
 			CONFIG_SYS_VCXK_ACKNOWLEDGE_PIN))
-#else
-	#define VCXK_INIT_PIN(PORT, PIN, DDR, I0O1) \
-		((AT91PS_PIO) PORT)->PIO_PER = PIN; \
-		((AT91PS_PIO) PORT)->DDR = PIN; \
-		((AT91PS_PIO) PORT)->PIO_MDDR = PIN; \
-		if (!I0O1) ((AT91PS_PIO) PORT)->PIO_PPUER = PIN;
-
-	#define VCXK_SET_PIN(PORT, PIN)	((AT91PS_PIO) PORT)->PIO_SODR  = PIN;
-	#define VCXK_CLR_PIN(PORT, PIN)	((AT91PS_PIO) PORT)->PIO_CODR  = PIN;
-
-	#define VCXK_ACKNOWLEDGE	\
-		(!(((AT91PS_PIO) CONFIG_SYS_VCXK_ACKNOWLEDGE_PORT)->\
-			PIO_PDSR & CONFIG_SYS_VCXK_ACKNOWLEDGE_PIN))
-#endif
 #elif defined(CONFIG_MCF52x2)
 	#include <asm/m5282.h>
 	#ifndef VCBITMASK
diff --git a/include/configs/afeb9260.h b/include/configs/afeb9260.h
index 5e718980ff..14bac155a3 100644
--- a/include/configs/afeb9260.h
+++ b/include/configs/afeb9260.h
@@ -106,7 +106,7 @@
 /* Ethernet */
 #define CONFIG_MACB
 #define CONFIG_RESET_PHY_R
-
+#define CONFIG_AT91_WANTS_COMMON_PHY
 #define CONFIG_NET_RETRY_COUNT		20
 
 /* USB */
diff --git a/include/configs/am335x_evm.h b/include/configs/am335x_evm.h
index d75df92797..8af4d6afba 100644
--- a/include/configs/am335x_evm.h
+++ b/include/configs/am335x_evm.h
@@ -42,12 +42,11 @@
 	"dfu_alt_info_nand=" DFU_ALT_INFO_NAND "\0" \
 	"nandroot=ubi0:rootfs rw ubi.mtd=7,2048\0" \
 	"nandrootfstype=ubifs rootwait=1\0" \
-	"nandsrcaddr=0x280000\0" \
-		"nandboot=echo Booting from nand ...; " \
+	"nandboot=echo Booting from nand ...; " \
 		"run nandargs; " \
-		"nand read ${loadaddr} ${nandsrcaddr} ${nandimgsize}; " \
-		"bootz ${loadaddr}\0" \
-	"nandimgsize=0x500000\0"
+		"nand read ${fdtaddr} u-boot-spl-os; " \
+		"nand read ${loadaddr} kernel; " \
+		"bootz ${loadaddr} - ${fdtaddr}\0"
 #else
 #define NANDARGS ""
 #endif
@@ -198,6 +197,10 @@
 #define CONFIG_SPL_POWER_SUPPORT
 #define CONFIG_SPL_YMODEM_SUPPORT
 
+/* Bootcount using the RTC block */
+#define CONFIG_BOOTCOUNT_LIMIT
+#define CONFIG_BOOTCOUNT_AM33XX
+
 /* CPSW support */
 #define CONFIG_SPL_ETH_SUPPORT
 
diff --git a/include/configs/am3517_evm.h b/include/configs/am3517_evm.h
index a3473b51bd..1fa477aac8 100644
--- a/include/configs/am3517_evm.h
+++ b/include/configs/am3517_evm.h
@@ -141,8 +141,18 @@
 #define CONFIG_SYS_OMAP24_I2C_SLAVE	1
 #define CONFIG_SYS_I2C_OMAP34XX
 
-#undef CONFIG_CMD_NET
-#undef CONFIG_CMD_NFS
+/*
+ * Ethernet
+ */
+#define CONFIG_DRIVER_TI_EMAC
+#define CONFIG_DRIVER_TI_EMAC_USE_RMII
+#define CONFIG_MII
+#define CONFIG_BOOTP_DEFAULT
+#define CONFIG_BOOTP_DNS
+#define CONFIG_BOOTP_DNS2
+#define CONFIG_BOOTP_SEND_HOSTNAME
+#define CONFIG_NET_RETRY_COUNT		10
+
 /*
  * Board NAND Info.
  */
diff --git a/include/configs/arndale.h b/include/configs/arndale.h
index ea8753b544..a3cb56b8bf 100644
--- a/include/configs/arndale.h
+++ b/include/configs/arndale.h
@@ -198,10 +198,6 @@
 #define BL2_START_OFFSET	(CONFIG_BL2_OFFSET/512)
 #define BL2_SIZE_BLOC_COUNT	(CONFIG_BL2_SIZE/512)
 
-#define CONFIG_SPI_BOOTING
-#define EXYNOS_COPY_SPI_FNPTR_ADDR	0x02020058
-#define SPI_FLASH_UBOOT_POS		(CONFIG_SEC_FW_SIZE + CONFIG_BL1_SIZE)
-
 #define CONFIG_DOS_PARTITION
 #define CONFIG_EFI_PARTITION
 #define CONFIG_CMD_PART
diff --git a/include/configs/at91sam9260ek.h b/include/configs/at91sam9260ek.h
index 1c4bb812f0..73917b0ec1 100644
--- a/include/configs/at91sam9260ek.h
+++ b/include/configs/at91sam9260ek.h
@@ -181,6 +181,7 @@
 #define CONFIG_RMII			1
 #define CONFIG_NET_RETRY_COUNT		20
 #define CONFIG_RESET_PHY_R		1
+#define CONFIG_AT91_WANTS_COMMON_PHY
 
 /* USB */
 #define CONFIG_USB_ATMEL
diff --git a/include/configs/at91sam9263ek.h b/include/configs/at91sam9263ek.h
index 0a1969df98..b9aa036039 100644
--- a/include/configs/at91sam9263ek.h
+++ b/include/configs/at91sam9263ek.h
@@ -275,6 +275,7 @@
 #define CONFIG_RMII			1
 #define CONFIG_NET_RETRY_COUNT		20
 #define CONFIG_RESET_PHY_R		1
+#define CONFIG_AT91_WANTS_COMMON_PHY
 
 /* USB */
 #define CONFIG_USB_ATMEL
diff --git a/include/configs/at91sam9m10g45ek.h b/include/configs/at91sam9m10g45ek.h
index 2095fe6879..ccfda71c95 100644
--- a/include/configs/at91sam9m10g45ek.h
+++ b/include/configs/at91sam9m10g45ek.h
@@ -15,7 +15,6 @@
 
 #define CONFIG_SYS_TEXT_BASE		0x73f00000
 
-#define CONFIG_AT91_LEGACY
 #define CONFIG_ATMEL_LEGACY		/* required until (g)pio is fixed */
 
 /* ARM asynchronous clock */
@@ -77,6 +76,10 @@
 /*
  * Command line configuration.
  */
+
+/* No NOR flash */
+#define CONFIG_SYS_NO_FLASH
+
 #include <config_cmd_default.h>
 #undef CONFIG_CMD_BDI
 #undef CONFIG_CMD_FPGA
@@ -97,9 +100,6 @@
 #define CONFIG_SYS_INIT_SP_ADDR \
 	(CONFIG_SYS_SDRAM_BASE + 4 * 1024 - GENERATED_GBL_DATA_SIZE)
 
-/* No NOR flash */
-#define CONFIG_SYS_NO_FLASH
-
 /* NAND flash */
 #ifdef CONFIG_CMD_NAND
 #define CONFIG_NAND_ATMEL
@@ -120,6 +120,7 @@
 #define CONFIG_RMII
 #define CONFIG_NET_RETRY_COUNT		20
 #define CONFIG_RESET_PHY_R
+#define CONFIG_AT91_WANTS_COMMON_PHY
 
 /* USB */
 #define CONFIG_USB_EHCI
diff --git a/include/configs/at91sam9n12ek.h b/include/configs/at91sam9n12ek.h
index 4ec1799ebc..e23549d444 100644
--- a/include/configs/at91sam9n12ek.h
+++ b/include/configs/at91sam9n12ek.h
@@ -113,8 +113,8 @@
 #define CONFIG_SYS_NAND_BASE		0x40000000
 #define CONFIG_SYS_NAND_MASK_ALE	(1 << 21)
 #define CONFIG_SYS_NAND_MASK_CLE	(1 << 22)
-#define CONFIG_SYS_NAND_ENABLE_PIN	AT91_PIO_PORTD, 4
-#define CONFIG_SYS_NAND_READY_PIN	AT91_PIO_PORTD, 5
+#define CONFIG_SYS_NAND_ENABLE_PIN	GPIO_PIN_PD(4)
+#define CONFIG_SYS_NAND_READY_PIN	GPIO_PIN_PD(5)
 
 /* PMECC & PMERRLOC */
 #define CONFIG_ATMEL_NAND_HWECC
diff --git a/include/configs/cm_t335.h b/include/configs/cm_t335.h
new file mode 100644
index 0000000000..56e9a8e0e8
--- /dev/null
+++ b/include/configs/cm_t335.h
@@ -0,0 +1,182 @@
+/*
+ * Config file for Compulab CM-T335 board
+ *
+ * Copyright (C) 2013, Compulab Ltd - http://compulab.co.il/
+ *
+ * Author: Ilya Ledvich <ilya@compulab.co.il>
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#ifndef __CONFIG_CM_T335_H
+#define __CONFIG_CM_T335_H
+
+#define CONFIG_CM_T335
+#define CONFIG_NAND
+
+#include <configs/ti_am335x_common.h>
+
+#undef CONFIG_BOARD_LATE_INIT
+#undef CONFIG_SPI
+#undef CONFIG_OMAP3_SPI
+#undef CONFIG_CMD_SPI
+#undef CONFIG_SPL_OS_BOOT
+#undef CONFIG_BOOTCOUNT_LIMIT
+#undef CONFIG_SPL_AM33XX_ENABLE_RTC32K_OSC
+
+#undef CONFIG_MAX_RAM_BANK_SIZE
+#define CONFIG_MAX_RAM_BANK_SIZE	(512 << 20)	/* 512MB */
+
+#undef CONFIG_SYS_PROMPT
+#define CONFIG_SYS_PROMPT		"CM-T335 # "
+
+#define CONFIG_OMAP_COMMON
+
+#define MACH_TYPE_CM_T335		4586	/* Until the next sync */
+#define CONFIG_MACH_TYPE		MACH_TYPE_CM_T335
+
+/* Clock Defines */
+#define V_OSCK				25000000  /* Clock output from T2 */
+#define V_SCLK				(V_OSCK)
+
+#define CONFIG_ENV_SIZE			(16 << 10)	/* 16 KiB */
+
+#ifndef CONFIG_SPL_BUILD
+#define MMCARGS \
+	"mmcdev=0\0" \
+	"mmcroot=/dev/mmcblk0p2 rw rootwait\0" \
+	"mmcrootfstype=ext4\0" \
+	"mmcargs=setenv bootargs console=${console} " \
+		"root=${mmcroot} " \
+		"rootfstype=${mmcrootfstype}\0" \
+	"mmcboot=echo Booting from mmc ...; " \
+		"run mmcargs; " \
+		"bootm ${loadaddr}\0"
+
+#define NANDARGS \
+	"mtdids=" MTDIDS_DEFAULT "\0" \
+	"mtdparts=" MTDPARTS_DEFAULT "\0" \
+	"nandroot=ubi0:rootfs rw\0" \
+	"nandrootfstype=ubifs\0" \
+	"nandargs=setenv bootargs console=${console} " \
+		"root=${nandroot} " \
+		"rootfstype=${nandrootfstype} " \
+		"ubi.mtd=${rootfs_name}\0" \
+	"nandboot=echo Booting from nand ...; " \
+		"run nandargs; " \
+		"nboot ${loadaddr} nand0 900000; " \
+		"bootm ${loadaddr}\0"
+
+
+#define CONFIG_EXTRA_ENV_SETTINGS \
+	"loadaddr=82000000\0" \
+	"console=ttyO0,115200n8\0" \
+	"rootfs_name=rootfs\0" \
+	"loadbootscript=fatload mmc ${mmcdev} ${loadaddr} boot.scr\0" \
+	"bootscript=echo Running bootscript from mmc ...; " \
+		"source ${loadaddr}\0" \
+	"loaduimage=fatload mmc ${mmcdev} ${loadaddr} uImage\0" \
+	MMCARGS \
+	NANDARGS
+
+#define CONFIG_BOOTCOMMAND \
+	"mmc dev ${mmcdev}; if mmc rescan; then " \
+		"if run loadbootscript; then " \
+			"run bootscript; " \
+		"else " \
+			"if run loaduimage; then " \
+				"run mmcboot; " \
+			"else run nandboot; " \
+			"fi; " \
+		"fi; " \
+	"else run nandboot; fi"
+#endif /* CONFIG_SPL_BUILD */
+
+#define CONFIG_TIMESTAMP
+#define CONFIG_SYS_AUTOLOAD		"no"
+
+/* Serial console configuration */
+#define CONFIG_CONS_INDEX		1
+#define CONFIG_SERIAL1			1	/* UART0 */
+
+/* NS16550 Configuration */
+#define CONFIG_SYS_NS16550_COM1		0x44e09000	/* UART0 */
+#define CONFIG_SYS_NS16550_COM2		0x48022000	/* UART1 */
+#define CONFIG_BAUDRATE			115200
+
+/* I2C Configuration */
+#define CONFIG_SYS_I2C_EEPROM_ADDR	0x50	/* Main EEPROM */
+#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN	1
+
+/* SPL */
+#define CONFIG_SPL_LDSCRIPT		"$(CPUDIR)/am33xx/u-boot-spl.lds"
+
+/* Network. */
+#define CONFIG_PHY_GIGE
+#define CONFIG_PHYLIB
+#define CONFIG_PHY_ADDR			0
+#define CONFIG_PHY_ATHEROS
+
+/* NAND support */
+#define CONFIG_SYS_NAND_5_ADDR_CYCLE
+#define CONFIG_SYS_NAND_PAGE_COUNT	(CONFIG_SYS_NAND_BLOCK_SIZE / \
+					 CONFIG_SYS_NAND_PAGE_SIZE)
+#define CONFIG_SYS_NAND_PAGE_SIZE	2048
+#define CONFIG_SYS_NAND_OOBSIZE		64
+#define CONFIG_SYS_NAND_BLOCK_SIZE	(128 * 1024)
+#define CONFIG_SYS_NAND_BAD_BLOCK_POS	NAND_LARGE_BADBLOCK_POS
+#define CONFIG_SYS_NAND_ECCPOS		{ 2, 3, 4, 5, 6, 7, 8, 9, \
+					 10, 11, 12, 13, 14, 15, 16, 17, \
+					 18, 19, 20, 21, 22, 23, 24, 25, \
+					 26, 27, 28, 29, 30, 31, 32, 33, \
+					 34, 35, 36, 37, 38, 39, 40, 41, \
+					 42, 43, 44, 45, 46, 47, 48, 49, \
+					 50, 51, 52, 53, 54, 55, 56, 57, }
+
+#define CONFIG_SYS_NAND_ECCSIZE		512
+#define CONFIG_SYS_NAND_ECCBYTES	14
+
+#define CONFIG_SYS_NAND_U_BOOT_START	CONFIG_SYS_TEXT_BASE
+
+#undef CONFIG_SYS_NAND_U_BOOT_OFFS
+#define CONFIG_SYS_NAND_U_BOOT_OFFS	0x200000
+
+#define CONFIG_CMD_NAND
+#define GPMC_NAND_ECC_LP_x8_LAYOUT
+#define MTDIDS_DEFAULT			"nand0=nand"
+#define MTDPARTS_DEFAULT		"mtdparts=nand:2m(spl)," \
+					"1m(u-boot),1m(u-boot-env)," \
+					"1m(dtb),4m(splash)," \
+					"6m(kernel),-(rootfs)"
+#define CONFIG_ENV_IS_IN_NAND
+#define CONFIG_ENV_OFFSET		0x300000 /* environment starts here */
+#define CONFIG_SYS_ENV_SECT_SIZE	(128 << 10)	/* 128 KiB */
+#define CONFIG_SYS_NAND_ONFI_DETECTION
+
+/* GPIO pin + bank to pin ID mapping */
+#define GPIO_PIN(_bank, _pin)		((_bank << 5) + _pin)
+
+/* Status LED */
+#define CONFIG_STATUS_LED
+#define CONFIG_GPIO_LED
+#define CONFIG_BOARD_SPECIFIC_LED
+#define STATUS_LED_BIT			GPIO_PIN(2, 0)
+/* Status LED polarity is inversed, so init it in the "off" state */
+#define STATUS_LED_STATE		STATUS_LED_OFF
+#define STATUS_LED_PERIOD		(CONFIG_SYS_HZ / 2)
+#define STATUS_LED_BOOT			0
+
+#ifndef CONFIG_SPL_BUILD
+/*
+ * Enable PCA9555 at I2C0-0x26.
+ * First select the I2C0 bus with "i2c dev 0", then use "pca953x" command.
+ */
+#define CONFIG_PCA953X
+#define CONFIG_CMD_PCA953X
+#define CONFIG_CMD_PCA953X_INFO
+#define CONFIG_SYS_I2C_PCA953X_ADDR	0x26
+#define CONFIG_SYS_I2C_PCA953X_WIDTH	{ {0x26, 16} }
+#endif /* CONFIG_SPL_BUILD */
+
+#endif	/* __CONFIG_CM_T335_H */
+
diff --git a/include/configs/cm_t35.h b/include/configs/cm_t35.h
index f4ecd0ddbe..e72187e30b 100644
--- a/include/configs/cm_t35.h
+++ b/include/configs/cm_t35.h
@@ -302,12 +302,13 @@
 /* Status LED */
 #define CONFIG_STATUS_LED		/* Status LED enabled */
 #define CONFIG_BOARD_SPECIFIC_LED
-#define STATUS_LED_GREEN		0
-#define STATUS_LED_BIT			STATUS_LED_GREEN
+#define CONFIG_GPIO_LED
+#define GREEN_LED_GPIO			186 /* CM-T35 Green LED is GPIO186 */
+#define GREEN_LED_DEV			0
+#define STATUS_LED_BIT			GREEN_LED_GPIO
 #define STATUS_LED_STATE		STATUS_LED_ON
 #define STATUS_LED_PERIOD		(CONFIG_SYS_HZ / 2)
-#define STATUS_LED_BOOT			STATUS_LED_BIT
-#define GREEN_LED_GPIO			186 /* CM-T35 Green LED is GPIO186 */
+#define STATUS_LED_BOOT			GREEN_LED_DEV
 
 #define CONFIG_SPLASHIMAGE_GUARD
 
diff --git a/include/configs/corvus.h b/include/configs/corvus.h
new file mode 100644
index 0000000000..11ba4cffc4
--- /dev/null
+++ b/include/configs/corvus.h
@@ -0,0 +1,165 @@
+/*
+ * Common board functions for siemens AT91SAM9G45 based boards
+ * (C) Copyright 2013 Siemens AG
+ *
+ * Based on:
+ * U-Boot file: include/configs/at91sam9m10g45ek.h
+ * (C) Copyright 2007-2008
+ * Stelian Pop <stelian@popies.net>
+ * Lead Tech Design <www.leadtechdesign.com>
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+#include <asm/hardware.h>
+
+#define MACH_TYPE_CORVUS               2066
+
+/*
+ * Warning: changing CONFIG_SYS_TEXT_BASE requires
+ * adapting the initial boot program.
+ * Since the linker has to swallow that define, we must use a pure
+ * hex number here!
+ */
+
+#define CONFIG_SYS_TEXT_BASE  0x73f00000
+
+#define CONFIG_AT91_LEGACY
+#define CONFIG_ATMEL_LEGACY		/* required until (g)pio is fixed */
+
+/* ARM asynchronous clock */
+#define CONFIG_SYS_AT91_SLOW_CLOCK      32768
+#define CONFIG_SYS_AT91_MAIN_CLOCK      12000000 /* from 12 MHz crystal */
+#define CONFIG_SYS_HZ		        1000
+
+#define CONFIG_AT91FAMILY
+
+#define CONFIG_CMDLINE_TAG		/* enable passing of ATAGs	*/
+#define CONFIG_SETUP_MEMORY_TAGS
+#define CONFIG_INITRD_TAG
+#define CONFIG_SKIP_LOWLEVEL_INIT
+#define CONFIG_BOARD_EARLY_INIT_F
+#define CONFIG_DISPLAY_CPUINFO
+
+#define CONFIG_CMD_BOOTZ
+#define CONFIG_OF_LIBFDT
+
+/* general purpose I/O */
+#define CONFIG_ATMEL_LEGACY		/* required until (g)pio is fixed */
+#define CONFIG_AT91_GPIO
+#define CONFIG_AT91_GPIO_PULLUP	1	/* keep pullups on peripheral pins */
+
+/* serial console */
+#define CONFIG_ATMEL_USART
+#define CONFIG_USART_BASE		ATMEL_BASE_DBGU
+#define CONFIG_USART_ID			ATMEL_ID_SYS
+
+/* LED */
+#define CONFIG_AT91_LED
+#define CONFIG_RED_LED		AT91_PIN_PD31	/* this is the user1 led */
+#define CONFIG_GREEN_LED	AT91_PIN_PD0	/* this is the user2 led */
+
+#define CONFIG_BOOTDELAY	3
+
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+#undef CONFIG_CMD_BDI
+#undef CONFIG_CMD_FPGA
+#undef CONFIG_CMD_IMI
+#undef CONFIG_CMD_IMLS
+#undef CONFIG_CMD_LOADS
+
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_NAND
+#define CONFIG_CMD_USB
+
+/* SDRAM */
+#define CONFIG_NR_DRAM_BANKS		1
+#define CONFIG_SYS_SDRAM_BASE           ATMEL_BASE_CS6
+#define CONFIG_SYS_SDRAM_SIZE		0x08000000
+
+#define CONFIG_SYS_INIT_SP_ADDR \
+	(CONFIG_SYS_SDRAM_BASE + 4 * 1024 - GENERATED_GBL_DATA_SIZE)
+
+/* No NOR flash */
+#define CONFIG_SYS_NO_FLASH
+
+/* NAND flash */
+#ifdef CONFIG_CMD_NAND
+#define CONFIG_NAND_ATMEL
+#define CONFIG_SYS_MAX_NAND_DEVICE		1
+#define CONFIG_SYS_NAND_BASE			ATMEL_BASE_CS3
+#define CONFIG_SYS_NAND_DBW_8
+/* our ALE is AD21 */
+#define CONFIG_SYS_NAND_MASK_ALE		(1 << 21)
+/* our CLE is AD22 */
+#define CONFIG_SYS_NAND_MASK_CLE		(1 << 22)
+#define CONFIG_SYS_NAND_ENABLE_PIN		AT91_PIN_PC14
+#define CONFIG_SYS_NAND_READY_PIN		AT91_PIN_PC8
+
+#endif
+
+/* Ethernet */
+#define CONFIG_MACB
+#define CONFIG_RMII
+#define CONFIG_NET_RETRY_COUNT		20
+#define CONFIG_AT91_WANTS_COMMON_PHY
+
+/* USB */
+#define CONFIG_USB_EHCI
+#define CONFIG_USB_EHCI_ATMEL
+#define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS	2
+#define CONFIG_DOS_PARTITION
+#define CONFIG_USB_STORAGE
+
+#define CONFIG_SYS_LOAD_ADDR		0x72000000	/* load address */
+
+/* bootstrap + u-boot + env in nandflash */
+#define CONFIG_ENV_IS_IN_NAND
+#define CONFIG_ENV_OFFSET		0x100000
+#define CONFIG_ENV_OFFSET_REDUND	0x180000
+#define CONFIG_ENV_SIZE			0x20000
+
+#define CONFIG_BOOTCOMMAND						\
+	"nand read 0x70000000 0x200000 0x300000;"			\
+	"bootm 0x70000000"
+#define CONFIG_BOOTARGS							\
+	"console=ttyS0,115200 earlyprintk "				\
+	"mtdparts=atmel_nand:256k(bootstrap)ro,512k(uboot)ro,"		\
+	"256k(env),256k(env_redundant),256k(spare),"			\
+	"512k(dtb),6M(kernel)ro,-(rootfs) "				\
+	"root=/dev/mtdblock7 rw rootfstype=jffs2"
+
+#define CONFIG_BAUDRATE			115200
+
+#define CONFIG_SYS_PROMPT		"U-Boot> "
+#define CONFIG_SYS_CBSIZE		256
+#define CONFIG_SYS_MAXARGS		16
+#define CONFIG_SYS_PBSIZE	(CONFIG_SYS_CBSIZE +	\
+				 sizeof(CONFIG_SYS_PROMPT) + 16)
+#define CONFIG_SYS_LONGHELP
+#define CONFIG_CMDLINE_EDITING
+#define CONFIG_AUTO_COMPLETE
+#define CONFIG_SYS_HUSH_PARSER
+
+/*
+ * Size of malloc() pool
+ */
+#define CONFIG_SYS_MALLOC_LEN	ROUND(3 * CONFIG_ENV_SIZE + \
+				128*1024, 0x1000)
+
+#endif
diff --git a/include/configs/cpu9260.h b/include/configs/cpu9260.h
index ccf36a5f93..39f7062388 100644
--- a/include/configs/cpu9260.h
+++ b/include/configs/cpu9260.h
@@ -280,8 +280,8 @@
 #define CONFIG_SYS_MAX_NAND_DEVICE		1
 #define CONFIG_SYS_NAND_BASE			0x40000000
 #define CONFIG_SYS_NAND_DBW_8			1
-#define CONFIG_SYS_NAND_READY_PIN		AT91_PIO_PORTC, 13
-#define CONFIG_SYS_NAND_ENABLE_PIN		AT91_PIO_PORTC, 14
+#define CONFIG_SYS_NAND_READY_PIN		GPIO_PIN_PC(13)
+#define CONFIG_SYS_NAND_ENABLE_PIN		GPIO_PIN_PC(14)
 #define CONFIG_SYS_NAND_MASK_ALE		(1 << 21)
 #define CONFIG_SYS_NAND_MASK_CLE		(1 << 22)
 
@@ -310,6 +310,7 @@
 #define CONFIG_RMII
 #define CONFIG_NET_RETRY_COUNT			20
 #define CONFIG_MACB_SEARCH_PHY
+#define CONFIG_AT91_WANTS_COMMON_PHY
 
 /* LEDS */
 /* Status LED */
diff --git a/include/configs/dra7xx_evm.h b/include/configs/dra7xx_evm.h
index 8a69c7d0a6..48b47cbd0b 100644
--- a/include/configs/dra7xx_evm.h
+++ b/include/configs/dra7xx_evm.h
@@ -83,4 +83,15 @@
 #define CONFIG_OMAP_USB_PHY
 #define CONFIG_OMAP_USB2PHY2_HOST
 
+/* SATA */
+#define CONFIG_BOARD_LATE_INIT
+#define CONFIG_CMD_SCSI
+#define CONFIG_LIBATA
+#define CONFIG_SCSI_AHCI
+#define CONFIG_SCSI_AHCI_PLAT
+#define CONFIG_SYS_SCSI_MAX_SCSI_ID	1
+#define CONFIG_SYS_SCSI_MAX_LUN		1
+#define CONFIG_SYS_SCSI_MAX_DEVICE	(CONFIG_SYS_SCSI_MAX_SCSI_ID * \
+						CONFIG_SYS_SCSI_MAX_LUN)
+
 #endif /* __CONFIG_DRA7XX_EVM_H */
diff --git a/include/configs/dxr2.h b/include/configs/dxr2.h
index cd553ec55b..1e42f5c23c 100644
--- a/include/configs/dxr2.h
+++ b/include/configs/dxr2.h
@@ -21,8 +21,8 @@
 
 #define CONFIG_SYS_MPUCLK	275
 #define DXR2_IOCTRL_VAL	0x18b
-#define DDR_PLL_FREQ	266
-#define CONFIG_SPL_AM33XX_DO_NOT_ENABLE_RTC32K
+#define DDR_PLL_FREQ	303
+#undef CONFIG_SPL_AM33XX_ENABLE_RTC32K_OSC
 
 #define BOARD_DFU_BUTTON_GPIO	27
 #define BOARD_DFU_BUTTON_LED	64
@@ -62,7 +62,7 @@
 /* Default env settings */
 #define CONFIG_EXTRA_ENV_SETTINGS \
 	"hostname=dxr2\0" \
-	"nand_img_size=0x300000\0" \
+	"nand_img_size=0x400000\0" \
 	"optargs=\0" \
 	CONFIG_COMMON_ENV_SETTINGS
 
@@ -75,10 +75,9 @@
 	"run dfu_start; " \
 	"reset; " \
 "fi;" \
-"if ping ${serverip}; then " \
-	"run net_nfs; " \
-"fi;" \
-"run nand_boot;"
+"run nand_boot;" \
+"reset;"
+
 
 #else
 #define CONFIG_BOOTDELAY		0
diff --git a/include/configs/eb_cpux9k2.h b/include/configs/eb_cpux9k2.h
index 2d8c42cf57..f7e70aa573 100644
--- a/include/configs/eb_cpux9k2.h
+++ b/include/configs/eb_cpux9k2.h
@@ -41,10 +41,6 @@
 #define CONFIG_SYS_LOAD_ADDR		0x21000000  /* default load address */
 #define CONFIG_STANDALONE_LOAD_ADDR	0x21000000
 
-#define CONFIG_SYS_BOOT_SIZE		0x00 /* 0 KBytes */
-#define CONFIG_SYS_U_BOOT_BASE		PHYS_FLASH_1
-#define CONFIG_SYS_U_BOOT_SIZE		0x60000 /* 384 KBytes */
-
 #define CONFIG_BOOT_RETRY_TIME		30
 #define CONFIG_CMDLINE_EDITING
 
diff --git a/include/configs/ethernut5.h b/include/configs/ethernut5.h
index 252df54e98..480d8678c6 100644
--- a/include/configs/ethernut5.h
+++ b/include/configs/ethernut5.h
@@ -149,7 +149,7 @@
 #define CONFIG_SYS_NAND_MASK_ALE	(1 << 21)
 /* our CLE is AD22 */
 #define CONFIG_SYS_NAND_MASK_CLE	(1 << 22)
-#define CONFIG_SYS_NAND_ENABLE_PIN	AT91_PIO_PORTC, 14
+#define CONFIG_SYS_NAND_ENABLE_PIN	GPIO_PIN_PC(14)
 #endif
 
 /* JFFS2 */
diff --git a/include/configs/exynos5250-dt.h b/include/configs/exynos5250-dt.h
index 1e9c1e3118..8fb904cddf 100644
--- a/include/configs/exynos5250-dt.h
+++ b/include/configs/exynos5250-dt.h
@@ -157,6 +157,7 @@
 #define COPY_BL2_FNPTR_ADDR	0x02020030
 
 #define CONFIG_SPL_LIBCOMMON_SUPPORT
+#define CONFIG_SPL_GPIO_SUPPORT
 
 /* specific .lds file */
 #define CONFIG_SPL_LDSCRIPT	"board/samsung/common/exynos-uboot-spl.lds"
@@ -266,6 +267,7 @@
 /* SPI */
 #define CONFIG_ENV_IS_IN_SPI_FLASH
 #define CONFIG_SPI_FLASH
+#define CONFIG_ENV_SPI_BASE	0x12D30000
 
 #ifdef CONFIG_SPI_FLASH
 #define CONFIG_EXYNOS_SPI
@@ -291,27 +293,6 @@
 #define CONFIG_POWER_I2C
 #define CONFIG_POWER_MAX77686
 
-/* SPI */
-#define CONFIG_ENV_IS_IN_SPI_FLASH
-#define CONFIG_SPI_FLASH
-
-#ifdef CONFIG_SPI_FLASH
-#define CONFIG_EXYNOS_SPI
-#define CONFIG_CMD_SF
-#define CONFIG_CMD_SPI
-#define CONFIG_SPI_FLASH_WINBOND
-#define CONFIG_SF_DEFAULT_MODE		SPI_MODE_0
-#define CONFIG_SF_DEFAULT_SPEED		50000000
-#define EXYNOS5_SPI_NUM_CONTROLLERS	5
-#endif
-
-#ifdef CONFIG_ENV_IS_IN_SPI_FLASH
-#define CONFIG_ENV_SPI_MODE	SPI_MODE_0
-#define CONFIG_ENV_SECT_SIZE	CONFIG_ENV_SIZE
-#define CONFIG_ENV_SPI_BUS	1
-#define CONFIG_ENV_SPI_MAX_HZ	50000000
-#endif
-
 /* Ethernet Controllor Driver */
 #ifdef CONFIG_CMD_NET
 #define CONFIG_SMC911X
diff --git a/include/configs/h2_p2_dbg_board.h b/include/configs/h2_p2_dbg_board.h
deleted file mode 100644
index 4ba2c55e98..0000000000
--- a/include/configs/h2_p2_dbg_board.h
+++ /dev/null
@@ -1,120 +0,0 @@
-/*
- *
- * BRIEF MODULE DESCRIPTION
- *   TI H2 and P2 Debug Board hardware map
- *
- * Copyright (C) 2004 MPC-Data Limited. (http://www.mpc-data.co.uk)
- * Author: MPC-Data Limited
- *	   Dave Peverley
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#ifndef __INCLUDED_H2_P2_DBH_BOARD_H
-#define __INCLUDED_H2_P2_DBH_BOARD_H
-
-#include <asm/sizes.h>
-
-/*
- * The Debug board is designed to function with the P2 Sample, H2
- * Sample and 1610 Innovator boards. The main difference AFAICT is
- * the chip selects used with each system ;
- *
- *   P2 Sample : CS1 of OMAP730 is used to select the CPLD & LAN regs
- *   H2 Sample : CS1a is used to select the CPLD registers.
- *
- */
-
-/***************************************************************************
- * CPLD Registers
- **************************************************************************/
-
-#define H2DBG_CPLD_REVISION        0x04000010
-#define H2DBG_BOARD_REVISION       0x04000012
-#define H2DBG_GPIO_REGISTER        0x04000014
-#define H2DBG_LED_CONTROL          0x04000016
-#define H2DBG_MISC_INPUT           0x04000018
-#define H2DBG_LAN_STATUS           0x0400001A
-#define H2DBG_LAN_RESET            0x0400001C
-#define H2DBG_ETH_REG_BASE         0x04000300
-
-/***************************************************************************
- * Ethernet Control Registers
- * These are for the LAN91C96 on the debug board
- **************************************************************************/
-
-/* Bank 0 in IO space */
-
-#define ETH_TCR            (H2DBG_ETH_REG_BASE + 0x00)   /* Transmit Control Register */
-#define ETH_EPH_STATUS     (H2DBG_ETH_REG_BASE + 0x02)   /* EPH Status Register */
-#define ETH_RCR            (H2DBG_ETH_REG_BASE + 0x04)   /* Receive Control Register */
-#define ETH_COUNTER        (H2DBG_ETH_REG_BASE + 0x06)   /* Counter Register */
-#define ETH_MIR            (H2DBG_ETH_REG_BASE + 0x08)   /* Memory Information Register */
-#define ETH_MCR            (H2DBG_ETH_REG_BASE + 0x0A)   /* Memory Configuration Register */
-
-/* Bank 1 in IO space */
-
-#define ETH_CONFIG         (H2DBG_ETH_REG_BASE + 0x00)   /* Configuration Register */
-#define ETH_BASE           (H2DBG_ETH_REG_BASE + 0x02)   /* Base Address Register */
-#define ETH_IA0            (H2DBG_ETH_REG_BASE + 0x04)   /* Individual Address Register - 0 */
-#define ETH_IA1            (H2DBG_ETH_REG_BASE + 0x05)   /* Individual Address Register - 1 */
-#define ETH_IA2            (H2DBG_ETH_REG_BASE + 0x06)   /* Individual Address Register - 2 */
-#define ETH_IA3            (H2DBG_ETH_REG_BASE + 0x07)   /* Individual Address Register - 3 */
-#define ETH_IA4            (H2DBG_ETH_REG_BASE + 0x08)   /* Individual Address Register - 4 */
-#define ETH_IA5            (H2DBG_ETH_REG_BASE + 0x09)   /* Individual Address Register - 5 */
-#define ETH_GEN_PURPOSE    (H2DBG_ETH_REG_BASE + 0x0A)   /* General Address Registers */
-#define ETH_CONTROL        (H2DBG_ETH_REG_BASE + 0x0B)   /* Control Register */
-
-/* Bank 2 in IO space */
-
-#define ETH_MMU            (H2DBG_ETH_REG_BASE + 0x00)   /* MMU Command Register */
-#define ETH_AUTO_TX_START  (H2DBG_ETH_REG_BASE + 0x01)   /* Auto Tx Start Register */
-#define ETH_PNR            (H2DBG_ETH_REG_BASE + 0x02)   /* Packet Number Register */
-#define ETH_ARR            (H2DBG_ETH_REG_BASE + 0x03)   /* Allocation Result Register */
-#define ETH_FIFO           (H2DBG_ETH_REG_BASE + 0x04)   /* FIFO Ports Register */
-#define ETH_POINTER        (H2DBG_ETH_REG_BASE + 0x06)   /* Pointer Register */
-#define ETH_DATA_HIGH      (H2DBG_ETH_REG_BASE + 0x08)   /* Data High Register */
-#define ETH_DATA_LOW       (H2DBG_ETH_REG_BASE + 0x0A)   /* Data Low Register */
-#define ETH_INT_STATS      (H2DBG_ETH_REG_BASE + 0x0C)   /* Interrupt Status Register - RO */
-#define ETH_INT_ACK        (H2DBG_ETH_REG_BASE + 0x0C)   /* Interrupt Acknowledge Register -WO */
-#define ETH_INT_MASK       (H2DBG_ETH_REG_BASE + 0x0D)   /* Interrupt Mask Register */
-
-
-#ifndef __ASSEMBLY__
-
-/*
- * A couple of utility inlines to aid debugging using the LED's on the
- * debug board.
- */
-
-static inline void set_led_state(int state)
-{
-	static unsigned long hw_led_state = 0;
-	volatile unsigned short *led_address = (volatile unsigned short *)0x04000016;
-
-	hw_led_state = ((unsigned long)state);
-	*((unsigned short *) (led_address)) = (unsigned short) (~hw_led_state & 0xFFFF);
-}
-
-
-static inline void spin_up_leds(void)
-{
-	volatile int i, j, k;
-
-	for (k = 0; k < 2; k++) {
-		for (i = 0; i < 16; i++) {
-			for (j = 0; j < 5000; j++) {
-				set_led_state(1 << i);
-			}
-		}
-		for (i = 15; i >= 0; i--) {
-			for (j = 0; j < 5000; j++) {
-				set_led_state(1 << i);
-			}
-		}
-	}
-}
-
-#endif    /* !  __ASSEMBLY__ */
-
-#endif    /* !  __INCLUDED_H2_P2_DBH_BOARD_H */
diff --git a/include/configs/koelsch.h b/include/configs/koelsch.h
new file mode 100644
index 0000000000..59c494854b
--- /dev/null
+++ b/include/configs/koelsch.h
@@ -0,0 +1,133 @@
+/*
+ * include/configs/koelsch.h
+ *
+ * Copyright (C) 2013 Renesas Electronics Corporation
+ *
+ * SPDX-License-Identifier: GPL-2.0
+ */
+
+#ifndef __KOELSCH_H
+#define __KOELSCH_H
+
+#undef DEBUG
+#define CONFIG_ARMV7
+#define CONFIG_R8A7791
+#define CONFIG_RMOBILE
+#define CONFIG_RMOBILE_BOARD_STRING "Koelsch"
+#define CONFIG_SH_GPIO_PFC
+
+#include <asm/arch/rmobile.h>
+
+#define	CONFIG_CMD_EDITENV
+#define	CONFIG_CMD_SAVEENV
+#define CONFIG_CMD_MEMORY
+#define CONFIG_CMD_DFL
+#define CONFIG_CMD_SDRAM
+#define CONFIG_CMD_RUN
+#define CONFIG_CMD_LOADS
+#define CONFIG_CMD_BOOTZ
+#define	CONFIG_CMD_FLASH
+
+#define	CONFIG_CMDLINE_TAG
+#define	CONFIG_SETUP_MEMORY_TAGS
+#define	CONFIG_INITRD_TAG
+#define	CONFIG_CMDLINE_EDITING
+
+#define CONFIG_OF_LIBFDT
+#define BOARD_LATE_INIT
+
+#define CONFIG_BAUDRATE		38400
+#define CONFIG_BOOTDELAY	3
+#define CONFIG_BOOTARGS		""
+
+#define CONFIG_VERSION_VARIABLE
+#undef	CONFIG_SHOW_BOOT_PROGRESS
+
+#define CONFIG_ARCH_CPU_INIT
+#define CONFIG_DISPLAY_CPUINFO
+#define CONFIG_DISPLAY_BOARDINFO
+#define CONFIG_BOARD_EARLY_INIT_F
+#define CONFIG_USE_ARCH_MEMSET
+#define CONFIG_USE_ARCH_MEMCPY
+#define CONFIG_TMU_TIMER
+
+/* STACK */
+#define CONFIG_SYS_INIT_SP_ADDR		0xE633fffc
+#define STACK_AREA_SIZE				0xC000
+#define LOW_LEVEL_MERAM_STACK	\
+		(CONFIG_SYS_INIT_SP_ADDR + STACK_AREA_SIZE - 4)
+
+/* MEMORY */
+#define KOELSCH_SDRAM_BASE	0x40000000
+#define KOELSCH_SDRAM_SIZE	(2048u * 1024 * 1024)
+#define KOELSCH_UBOOT_SDRAM_SIZE	(512 * 1024 * 1024)
+
+#define CONFIG_SYS_LONGHELP
+#define CONFIG_SYS_CBSIZE		256
+#define CONFIG_SYS_PBSIZE		256
+#define CONFIG_SYS_MAXARGS		16
+#define CONFIG_SYS_BARGSIZE		512
+#define CONFIG_SYS_BAUDRATE_TABLE	{ 38400, 115200 }
+
+/* SCIF */
+#define CONFIG_SCIF_CONSOLE
+#define CONFIG_CONS_SCIF0
+#define SCIF0_BASE		0xe6e60000
+#undef	CONFIG_SYS_CONSOLE_INFO_QUIET
+#undef	CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE
+#undef	CONFIG_SYS_CONSOLE_ENV_OVERWRITE
+
+#define CONFIG_SYS_MEMTEST_START	(KOELSCH_SDRAM_BASE)
+#define CONFIG_SYS_MEMTEST_END		(CONFIG_SYS_MEMTEST_START + \
+					 504 * 1024 * 1024)
+#undef	CONFIG_SYS_ALT_MEMTEST
+#undef	CONFIG_SYS_MEMTEST_SCRATCH
+#undef	CONFIG_SYS_LOADS_BAUD_CHANGE
+
+#define CONFIG_SYS_SDRAM_BASE		(KOELSCH_SDRAM_BASE)
+#define CONFIG_SYS_SDRAM_SIZE		(KOELSCH_UBOOT_SDRAM_SIZE)
+#define CONFIG_SYS_LOAD_ADDR		(CONFIG_SYS_SDRAM_BASE + 0x7fc0)
+#define CONFIG_NR_DRAM_BANKS		1
+
+#define CONFIG_SYS_MONITOR_BASE		0x00000000
+#define CONFIG_SYS_MONITOR_LEN		(256 * 1024)
+#define CONFIG_SYS_MALLOC_LEN		(1 * 1024 * 1024)
+#define CONFIG_SYS_GBL_DATA_SIZE	(256)
+#define CONFIG_SYS_BOOTMAPSZ		(8 * 1024 * 1024)
+
+/* FLASH */
+#define CONFIG_SYS_TEXT_BASE	0x00000000
+#define CONFIG_SYS_FLASH_CFI
+#define CONFIG_SYS_FLASH_CFI_WIDTH	FLASH_CFI_16BIT
+#define	CONFIG_FLASH_CFI_DRIVER
+#define	CONFIG_CFI_FLASH_USE_WEAK_ACCESSORS
+#define	CONFIG_FLASH_SHOW_PROGRESS	45
+#define CONFIG_SYS_FLASH_BASE		0x00000000
+#define	CONFIG_SYS_FLASH_SIZE		0x04000000	/* 64 MB */
+#define CONFIG_SYS_MAX_FLASH_SECT	1024
+#define CONFIG_SYS_MAX_FLASH_BANKS	1
+#define CONFIG_SYS_FLASH_BANKS_LIST	{ (CONFIG_SYS_FLASH_BASE) }
+#define	CONFIG_SYS_FLASH_BANKS_SIZES	{ (CONFIG_SYS_FLASH_SIZE) }
+#define CONFIG_SYS_FLASH_ERASE_TOUT	3000
+#define CONFIG_SYS_FLASH_WRITE_TOUT	3000
+#define CONFIG_SYS_FLASH_LOCK_TOUT	3000
+#define CONFIG_SYS_FLASH_UNLOCK_TOUT	3000
+
+/* ENV setting */
+#define CONFIG_ENV_IS_IN_FLASH
+#define CONFIG_ENV_OVERWRITE	1
+#define CONFIG_ENV_SECT_SIZE	(256 * 1024)
+#define CONFIG_ENV_ADDR		(CONFIG_SYS_FLASH_BASE + \
+				 CONFIG_SYS_MONITOR_LEN)
+#define CONFIG_ENV_OFFSET	(CONFIG_ENV_ADDR)
+#define CONFIG_ENV_SIZE		(CONFIG_ENV_SECT_SIZE)
+#define CONFIG_ENV_SIZE_REDUND	(CONFIG_SYS_MONITOR_LEN)
+
+/* Board Clock */
+#define	CONFIG_SYS_CLK_FREQ	10000000
+#define CONFIG_SH_TMU_CLK_FREQ	CONFIG_SYS_CLK_FREQ
+#define CONFIG_SH_SCIF_CLK_FREQ	14745600
+#define CONFIG_SYS_TMU_CLK_DIV	4
+#define CONFIG_SYS_HZ		1000
+
+#endif	/* __KOELSCH_H */
diff --git a/include/configs/lager.h b/include/configs/lager.h
new file mode 100644
index 0000000000..7819edddc6
--- /dev/null
+++ b/include/configs/lager.h
@@ -0,0 +1,141 @@
+/*
+ * include/configs/lager.h
+ *     This file is lager board configuration.
+ *
+ * Copyright (C) 2013 Renesas Electronics Corporation
+ *
+ * SPDX-License-Identifier: GPL-2.0
+ */
+
+#ifndef __LAGER_H
+#define __LAGER_H
+
+#undef DEBUG
+#define CONFIG_ARMV7
+#define CONFIG_R8A7790
+#define CONFIG_RMOBILE
+#define CONFIG_RMOBILE_BOARD_STRING "Lager"
+#define CONFIG_SH_GPIO_PFC
+#define MACH_TYPE_LAGER		4538
+#define CONFIG_MACH_TYPE	MACH_TYPE_LAGER
+
+#include <asm/arch/rmobile.h>
+
+#define	CONFIG_CMD_EDITENV
+#define	CONFIG_CMD_SAVEENV
+#define CONFIG_CMD_MEMORY
+#define CONFIG_CMD_DFL
+#define CONFIG_CMD_SDRAM
+#define CONFIG_CMD_RUN
+#define CONFIG_CMD_LOADS
+#define CONFIG_CMD_BOOTZ
+#define	CONFIG_CMD_FLASH
+
+#define	CONFIG_CMDLINE_TAG
+#define	CONFIG_SETUP_MEMORY_TAGS
+#define	CONFIG_INITRD_TAG
+#define	CONFIG_CMDLINE_EDITING
+#define	CONFIG_OF_LIBFDT
+
+/* #define CONFIG_OF_LIBFDT */
+#define BOARD_LATE_INIT
+
+#define CONFIG_BAUDRATE		38400
+#define CONFIG_BOOTDELAY	3
+#define CONFIG_BOOTARGS		""
+
+#define CONFIG_VERSION_VARIABLE
+#undef	CONFIG_SHOW_BOOT_PROGRESS
+
+#define CONFIG_ARCH_CPU_INIT
+#define CONFIG_DISPLAY_CPUINFO
+#define CONFIG_DISPLAY_BOARDINFO
+#define CONFIG_BOARD_EARLY_INIT_F
+#define CONFIG_USE_ARCH_MEMSET
+#define CONFIG_USE_ARCH_MEMCPY
+#define CONFIG_TMU_TIMER
+
+/* STACK */
+#define CONFIG_SYS_INIT_SP_ADDR		0xE827fffc
+#define STACK_AREA_SIZE				0xC000
+#define LOW_LEVEL_MERAM_STACK	\
+		(CONFIG_SYS_INIT_SP_ADDR + STACK_AREA_SIZE - 4)
+
+/* MEMORY */
+#define LAGER_SDRAM_BASE	0x40000000
+#define LAGER_SDRAM_SIZE	(2048u * 1024 * 1024)
+#define LAGER_UBOOT_SDRAM_SIZE	(512 * 1024 * 1024)
+
+#define CONFIG_SYS_LONGHELP
+#define CONFIG_SYS_CBSIZE		256
+#define CONFIG_SYS_PBSIZE		256
+#define CONFIG_SYS_MAXARGS		16
+#define CONFIG_SYS_BARGSIZE		512
+#define CONFIG_SYS_BAUDRATE_TABLE	{ 38400, 115200 }
+
+/* SCIF */
+#define CONFIG_SCIF_CONSOLE
+#define CONFIG_CONS_SCIF0
+#define SCIF0_BASE		0xe6e60000
+#undef	CONFIG_SYS_CONSOLE_INFO_QUIET
+#undef	CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE
+#undef	CONFIG_SYS_CONSOLE_ENV_OVERWRITE
+
+#define CONFIG_SYS_MEMTEST_START	(LAGER_SDRAM_BASE)
+#define CONFIG_SYS_MEMTEST_END		(CONFIG_SYS_MEMTEST_START + \
+					 504 * 1024 * 1024)
+#undef	CONFIG_SYS_ALT_MEMTEST
+#undef	CONFIG_SYS_MEMTEST_SCRATCH
+#undef	CONFIG_SYS_LOADS_BAUD_CHANGE
+
+#define CONFIG_SYS_SDRAM_BASE		(LAGER_SDRAM_BASE)
+#define CONFIG_SYS_SDRAM_SIZE		(LAGER_UBOOT_SDRAM_SIZE)
+#define CONFIG_SYS_LOAD_ADDR		(CONFIG_SYS_SDRAM_BASE + 0x7fc0)
+#define CONFIG_NR_DRAM_BANKS		1
+
+#define CONFIG_SYS_MONITOR_BASE		0x00000000
+#define CONFIG_SYS_MONITOR_LEN		(256 * 1024)
+#define CONFIG_SYS_MALLOC_LEN		(1 * 1024 * 1024)
+#define CONFIG_SYS_GBL_DATA_SIZE	(256)
+#define CONFIG_SYS_BOOTMAPSZ		(8 * 1024 * 1024)
+
+/* USE NOR FLASH */
+#define CONFIG_SYS_TEXT_BASE	0x00000000
+#define CONFIG_SYS_FLASH_CFI
+#define CONFIG_SYS_FLASH_CFI_WIDTH	FLASH_CFI_16BIT
+#define	CONFIG_FLASH_CFI_DRIVER
+#define	CONFIG_CFI_FLASH_USE_WEAK_ACCESSORS
+#define	CONFIG_FLASH_SHOW_PROGRESS	45
+#define CONFIG_SYS_FLASH_BASE		0x00000000
+#define	CONFIG_SYS_FLASH_SIZE		0x04000000	/* 64 MB */
+#define CONFIG_SYS_MAX_FLASH_SECT	1024
+#define CONFIG_SYS_MAX_FLASH_BANKS	1
+#define CONFIG_SYS_FLASH_BANKS_LIST	{ (CONFIG_SYS_FLASH_BASE) }
+#define	CONFIG_SYS_FLASH_BANKS_SIZES	{ (CONFIG_SYS_FLASH_SIZE) }
+#define CONFIG_SYS_FLASH_ERASE_TOUT	3000
+#define CONFIG_SYS_FLASH_WRITE_TOUT	3000
+#define CONFIG_SYS_FLASH_LOCK_TOUT	3000
+#define CONFIG_SYS_FLASH_UNLOCK_TOUT	3000
+
+/* ENV setting */
+#define CONFIG_ENV_IS_IN_FLASH
+#define CONFIG_ENV_OVERWRITE	1
+#define CONFIG_ENV_SECT_SIZE	(256 * 1024)
+#define CONFIG_ENV_ADDR		(CONFIG_SYS_FLASH_BASE + \
+				 CONFIG_SYS_MONITOR_LEN)
+#define CONFIG_ENV_OFFSET	(CONFIG_ENV_ADDR)
+#define CONFIG_ENV_SIZE		(CONFIG_ENV_SECT_SIZE)
+#define CONFIG_ENV_SIZE_REDUND	(CONFIG_SYS_MONITOR_LEN)
+
+/* Board Clock */
+#define CONFIG_BASE_CLK_FREQ	20000000u
+#define CONFIG_SH_TMU_CLK_FREQ	(CONFIG_BASE_CLK_FREQ / 2) /* EXT / 2 */
+#define CONFIG_PLL1_CLK_FREQ	(CONFIG_BASE_CLK_FREQ * 156 / 2)
+#define CONFIG_PLL1_DIV2_CLK_FREQ	(CONFIG_PLL1_CLK_FREQ / 2)
+#define CONFIG_MP_CLK_FREQ	(CONFIG_PLL1_DIV2_CLK_FREQ / 15)
+#define CONFIG_SH_SCIF_CLK_FREQ	CONFIG_MP_CLK_FREQ
+
+#define CONFIG_SYS_TMU_CLK_DIV	4
+#define CONFIG_SYS_HZ		1000
+
+#endif	/* __LAGER_H */
diff --git a/include/configs/meesc.h b/include/configs/meesc.h
index 91f6e2f8d3..86ce5f2397 100644
--- a/include/configs/meesc.h
+++ b/include/configs/meesc.h
@@ -143,8 +143,8 @@
 # define CONFIG_SYS_NAND_DBW_8
 # define CONFIG_SYS_NAND_MASK_ALE		(1 << 21)
 # define CONFIG_SYS_NAND_MASK_CLE		(1 << 22)
-# define CONFIG_SYS_NAND_ENABLE_PIN		AT91_PIO_PORTD, 15
-# define CONFIG_SYS_NAND_READY_PIN		AT91_PIO_PORTA, 22
+# define CONFIG_SYS_NAND_ENABLE_PIN		GPIO_PIN_PD(15)
+# define CONFIG_SYS_NAND_READY_PIN		GPIO_PIN_PA(22)
 #endif
 
 /* Ethernet */
diff --git a/include/configs/omap3_beagle.h b/include/configs/omap3_beagle.h
index 9eab1903ff..3acb8543f8 100644
--- a/include/configs/omap3_beagle.h
+++ b/include/configs/omap3_beagle.h
@@ -118,9 +118,6 @@
 #define CONFIG_USB_EHCI_OMAP
 #define CONFIG_OMAP_EHCI_PHY1_RESET_GPIO	147
 
-#define CONFIG_USB_ULPI
-#define CONFIG_USB_ULPI_VIEWPORT_OMAP
-
 #define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS 3
 #define CONFIG_USB_HOST_ETHER
 #define CONFIG_USB_ETHER_SMSC95XX
diff --git a/include/configs/omap4_panda.h b/include/configs/omap4_panda.h
index 6820e424d6..73dc088595 100644
--- a/include/configs/omap4_panda.h
+++ b/include/configs/omap4_panda.h
@@ -36,9 +36,6 @@
 #define CONFIG_CMD_PING
 #define CONFIG_CMD_DHCP
 
-#define CONFIG_USB_ULPI
-#define CONFIG_USB_ULPI_VIEWPORT_OMAP
-
 #include <configs/omap4_common.h>
 #define CONFIG_CMD_NET
 
diff --git a/include/configs/omap5_uevm.h b/include/configs/omap5_uevm.h
index 4d3a800298..2f128b8a69 100644
--- a/include/configs/omap5_uevm.h
+++ b/include/configs/omap5_uevm.h
@@ -69,4 +69,14 @@
 /* Max time to hold reset on this board, see doc/README.omap-reset-time */
 #define CONFIG_OMAP_PLATFORM_RESET_TIME_MAX_USEC	16296
 
+#define CONFIG_BOARD_LATE_INIT
+#define CONFIG_CMD_SCSI
+#define CONFIG_LIBATA
+#define CONFIG_SCSI_AHCI
+#define CONFIG_SCSI_AHCI_PLAT
+#define CONFIG_SYS_SCSI_MAX_SCSI_ID	1
+#define CONFIG_SYS_SCSI_MAX_LUN		1
+#define CONFIG_SYS_SCSI_MAX_DEVICE	(CONFIG_SYS_SCSI_MAX_SCSI_ID * \
+						CONFIG_SYS_SCSI_MAX_LUN)
+
 #endif /* __CONFIG_OMAP5_EVM_H */
diff --git a/include/configs/omap730.h b/include/configs/omap730.h
deleted file mode 100644
index b54e0fb2da..0000000000
--- a/include/configs/omap730.h
+++ /dev/null
@@ -1,246 +0,0 @@
-/*
- *
- * BRIEF MODULE DESCRIPTION
- *   OMAP730 hardware map
- *
- * Copyright (C) 2004 MPC-Data Limited. (http://www.mpc-data.co.uk)
- * Author: MPC-Data Limited
- *	   Dave Peverley
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#ifndef __INCLUDED_OMAP730_H
-#define __INCLUDED_OMAP730_H
-
-#include <asm/sizes.h>
-
-/***************************************************************************
- * OMAP730 Configuration Registers
- **************************************************************************/
-
-#define PERSEUS2_MPU_DEV_ID               ((unsigned int)(0xFFFE1000))
-#define PERSEUS2_GSM_DEV_ID0              ((unsigned int)(0xFFFE1000))
-#define PERSEUS2_GDM_DEV_ID1              ((unsigned int)(0xFFFE1002))
-#define DSP_CONF                          ((unsigned int)(0xFFFE1004))
-#define PERSEUS2_MPU_DIE_ID0              ((unsigned int)(0xFFFE1008))
-#define GSM_ASIC_CONF                     ((unsigned int)(0xFFFE1008))
-#define PERSEUS2_MPU_DIE_ID1              ((unsigned int)(0xFFFE100C))
-#define PERSEUS2_MODE1                    ((unsigned int)(0xFFFE1010))
-#define PERSEUS2_GSM_DIE_ID0              ((unsigned int)(0xFFFE1010))
-#define PERSEUS2_GSM_DIE_ID1              ((unsigned int)(0xFFFE1012))
-#define PERSEUS2_MODE2                    ((unsigned int)(0xFFFE1014))
-#define PERSEUS2_GSM_DIE_ID2              ((unsigned int)(0xFFFE1014))
-#define PERSEUS2_GSM_DIE_ID3              ((unsigned int)(0xFFFE1016))
-#define PERSEUS2_ANALOG_CELLS_CONF        ((unsigned int)(0xFFFE1018))
-#define SPECCTL                           ((unsigned int)(0xFFFE101C))
-#define SPARE1                            ((unsigned int)(0xFFFE1020))
-#define SPARE2                            ((unsigned int)(0xFFFE1024))
-#define GSM_PBG_IRQ                       ((unsigned int)(0xFFFE1028))
-#define DMA_REQ_CONF                      ((unsigned int)(0xFFFE1030))
-#define PE_CONF_NO_DUAL                   ((unsigned int)(0xFFFE1060))
-#define PERSEUS2_IO_CONF0                 ((unsigned int)(0xFFFE1070))
-#define PERSEUS2_IO_CONF1                 ((unsigned int)(0xFFFE1074))
-#define PERSEUS2_IO_CONF2                 ((unsigned int)(0xFFFE1078))
-#define PERSEUS2_IO_CONF3                 ((unsigned int)(0xFFFE107C))
-#define PERSEUS2_IO_CONF4                 ((unsigned int)(0xFFFE1080))
-#define PERSEUS2_IO_CONF5                 ((unsigned int)(0xFFFE1084))
-#define PERSEUS2_IO_CONF6                 ((unsigned int)(0xFFFE1088))
-#define PERSEUS2_IO_CONF7                 ((unsigned int)(0xFFFE108C))
-#define PERSEUS2_IO_CONF8                 ((unsigned int)(0xFFFE1090))
-#define PERSEUS2_IO_CONF9                 ((unsigned int)(0xFFFE1094))
-#define PERSEUS2_IO_CONF10                ((unsigned int)(0xFFFE1098))
-#define PERSEUS2_IO_CONF11                ((unsigned int)(0xFFFE109C))
-#define PERSEUS2_IO_CONF12                ((unsigned int)(0xFFFE10A0))
-#define PERSEUS2_IO_CONF13                ((unsigned int)(0xFFFE10A4))
-#define PERSEUS_PCC_CONF_REG              ((unsigned int)(0xFFFE10B4))
-#define BIST_STATUS_INTERNAL              ((unsigned int)(0xFFFE10B8))
-#define BIST_CONTROL                      ((unsigned int)(0xFFFE10C0))
-#define BOOT_ROM_REG                      ((unsigned int)(0xFFFE10C4))
-#define PRODUCTION_ID_REG                 ((unsigned int)(0xFFFE10C8))
-#define BIST_SECROM_SIGNATURE1_INTERNAL   ((unsigned int)(0xFFFE10D0))
-#define BIST_SECROM_SIGNATURE2_INTERNAL   ((unsigned int)(0xFFFE10D4))
-#define BIST_CONTROL_2                    ((unsigned int)(0xFFFE10D8))
-#define DEBUG1                            ((unsigned int)(0xFFFE10E0))
-#define DEBUG2                            ((unsigned int)(0xFFFE10E4))
-#define DEBUG_DMA_IRQ                     ((unsigned int)(0xFFFE10E8))
-
-/***************************************************************************
- * OMAP730 EMIFS Registers                                       (TRM 2.5.7)
- **************************************************************************/
-
-#define TCMIF_BASE                 0xFFFECC00
-
-#define EMIFS_LRUREG               (TCMIF_BASE + 0x04)
-#define EMIFS_CONFIG               (TCMIF_BASE + 0x0C)
-#define FLASH_CFG_0                (TCMIF_BASE + 0x10)
-#define FLASH_CFG_1                (TCMIF_BASE + 0x14)
-#define FLASH_CFG_2                (TCMIF_BASE + 0x18)
-#define FLASH_CFG_3                (TCMIF_BASE + 0x1C)
-#define FL_CFG_DYN_WAIT            (TCMIF_BASE + 0x40)
-#define EMIFS_TIMEOUT1_REG         (TCMIF_BASE + 0x28)
-#define EMIFS_TIMEOUT2_REG         (TCMIF_BASE + 0x2C)
-#define EMIFS_TIMEOUT3_REG         (TCMIF_BASE + 0x30)
-#define EMIFS_ABORT_ADDR           (TCMIF_BASE + 0x44)
-#define EMIFS_ABORT_TYPE           (TCMIF_BASE + 0x48)
-#define EMIFS_ABORT_TOUT           (TCMIF_BASE + 0x4C)
-#define FLASH_ACFG_0_1             (TCMIF_BASE + 0x50)
-#define FLASH_ACFG_1_1             (TCMIF_BASE + 0x54)
-#define FLASH_ACFG_2_1             (TCMIF_BASE + 0x58)
-#define FLASH_ACFG_3_1             (TCMIF_BASE + 0x5C)
-
-/***************************************************************************
- * OMAP730 Interrupt handlers
- **************************************************************************/
-
-#define OMAP_IH1_BASE		0xFFFECB00     /* MPU Level 1 IRQ handler */
-#define OMAP_IH2_BASE           0xfffe0000
-
-/***************************************************************************
- * OMAP730 Timers
- *
- * There are three general purpose OS timers in the 730 that can be
- * configured in autoreload or one-shot modes.
- **************************************************************************/
-
-#define OMAP730_32kHz_TIMER_BASE  0xFFFB9000
-
-/* 32k Timer Registers */
-#define TIMER32k_CR               0x08
-#define TIMER32k_TVR              0x00
-#define TIMER32k_TCR              0x04
-
-/* 32k Timer Control Register definition */
-#define TIMER32k_TSS              (1<<0)
-#define TIMER32k_TRB              (1<<1)
-#define TIMER32k_INT              (1<<2)
-#define TIMER32k_ARL              (1<<3)
-
-/* MPU Timer base addresses  */
-#define OMAP730_MPUTIMER_BASE	0xfffec500
-#define OMAP730_MPUTIMER_OFF	0x00000100
-
-#define OMAP730_TIMER1_BASE	0xFFFEC500
-#define OMAP730_TIMER2_BASE	0xFFFEC600
-#define OMAP730_TIMER3_BASE	0xFFFEC700
-
-/* MPU Timer Register offsets */
-#define CNTL_TIMER	           0x00   /* MPU_CNTL_TIMER */
-#define LOAD_TIM	           0x04   /* MPU_LOAD_TIMER */
-#define READ_TIM	           0x08   /* MPU_READ_TIMER */
-
-/* MPU_CNTL_TIMER register bits */
-#define MPUTIM_FREE               (1<<6)
-#define MPUTIM_CLOCK_ENABLE       (1<<5)
-#define MPUTIM_PTV_MASK           (0x7<<MPUTIM_PTV_BIT)
-#define MPUTIM_PTV_BIT            2
-#define MPUTIM_AR                 (1<<1)
-#define MPUTIM_ST                 (1<<0)
-
-/***************************************************************************
- * OMAP730 GPIO
- *
- * The GPIO control is split over 6 register bases in the OMAP730 to allow
- * access to all the (6 x 32) GPIO pins!
- **************************************************************************/
-
-#define OMAP730_GPIO_BASE_1        0xFFFBC000
-#define OMAP730_GPIO_BASE_2        0xFFFBC800
-#define OMAP730_GPIO_BASE_3        0xFFFBD000
-#define OMAP730_GPIO_BASE_4        0xFFFBD800
-#define OMAP730_GPIO_BASE_5        0xFFFBE000
-#define OMAP730_GPIO_BASE_6        0xFFFBE800
-
-#define GPIO_DATA_INPUT            0x00
-#define GPIO_DATA_OUTPUT           0x04
-#define GPIO_DIRECTION_CONTROL     0x08
-#define GPIO_INTERRUPT_CONTROL     0x0C
-#define GPIO_INTERRUPT_MASK        0x10
-#define GPIO_INTERRUPT_STATUS      0x14
-
-#define GPIO_DATA_INPUT_1            ((unsigned int)(OMAP730_GPIO_BASE_1 + GPIO_DATA_INPUT))
-#define GPIO_DATA_OUTPUT_1           ((unsigned int)(OMAP730_GPIO_BASE_1 + GPIO_DATA_OUTPUT))
-#define GPIO_DIRECTION_CONTROL_1     ((unsigned int)(OMAP730_GPIO_BASE_1 + GPIO_DIRECTION_CONTROL))
-#define GPIO_INTERRUPT_CONTROL_1     ((unsigned int)(OMAP730_GPIO_BASE_1 + GPIO_INTERRUPT_CONTROL))
-#define GPIO_INTERRUPT_MASK_1        ((unsigned int)(OMAP730_GPIO_BASE_1 + GPIO_INTERRUPT_MASK))
-#define GPIO_INTERRUPT_STATUS_1      ((unsigned int)(OMAP730_GPIO_BASE_1 + GPIO_INTERRUPT_STATUS))
-
-#define GPIO_DATA_INPUT_2            ((unsigned int)(OMAP730_GPIO_BASE_2 + GPIO_DATA_INPUT))
-#define GPIO_DATA_OUTPUT_2           ((unsigned int)(OMAP730_GPIO_BASE_2 + GPIO_DATA_OUTPUT))
-#define GPIO_DIRECTION_CONTROL_2     ((unsigned int)(OMAP730_GPIO_BASE_2 + GPIO_DIRECTION_CONTROL))
-#define GPIO_INTERRUPT_CONTROL_2     ((unsigned int)(OMAP730_GPIO_BASE_2 + GPIO_INTERRUPT_CONTROL))
-#define GPIO_INTERRUPT_MASK_2        ((unsigned int)(OMAP730_GPIO_BASE_2 + GPIO_INTERRUPT_MASK))
-#define GPIO_INTERRUPT_STATUS_2      ((unsigned int)(OMAP730_GPIO_BASE_2 + GPIO_INTERRUPT_STATUS))
-
-#define GPIO_DATA_INPUT_3            ((unsigned int)(OMAP730_GPIO_BASE_3 + GPIO_DATA_INPUT))
-#define GPIO_DATA_OUTPUT_3           ((unsigned int)(OMAP730_GPIO_BASE_3 + GPIO_DATA_OUTPUT))
-#define GPIO_DIRECTION_CONTROL_3     ((unsigned int)(OMAP730_GPIO_BASE_3 + GPIO_DIRECTION_CONTROL))
-#define GPIO_INTERRUPT_CONTROL_3     ((unsigned int)(OMAP730_GPIO_BASE_3 + GPIO_INTERRUPT_CONTROL))
-#define GPIO_INTERRUPT_MASK_3        ((unsigned int)(OMAP730_GPIO_BASE_3 + GPIO_INTERRUPT_MASK))
-#define GPIO_INTERRUPT_STATUS_3      ((unsigned int)(OMAP730_GPIO_BASE_3 + GPIO_INTERRUPT_STATUS))
-
-#define GPIO_DATA_INPUT_4            ((unsigned int)(OMAP730_GPIO_BASE_4 + GPIO_DATA_INPUT))
-#define GPIO_DATA_OUTPUT_4           ((unsigned int)(OMAP730_GPIO_BASE_4 + GPIO_DATA_OUTPUT))
-#define GPIO_DIRECTION_CONTROL_4     ((unsigned int)(OMAP730_GPIO_BASE_4 + GPIO_DIRECTION_CONTROL))
-#define GPIO_INTERRUPT_CONTROL_4     ((unsigned int)(OMAP730_GPIO_BASE_4 + GPIO_INTERRUPT_CONTROL))
-#define GPIO_INTERRUPT_MASK_4        ((unsigned int)(OMAP730_GPIO_BASE_4 + GPIO_INTERRUPT_MASK))
-#define GPIO_INTERRUPT_STATUS_4      ((unsigned int)(OMAP730_GPIO_BASE_4 + GPIO_INTERRUPT_STATUS))
-
-#define GPIO_DATA_INPUT_5            ((unsigned int)(OMAP730_GPIO_BASE_5 + GPIO_DATA_INPUT))
-#define GPIO_DATA_OUTPUT_5           ((unsigned int)(OMAP730_GPIO_BASE_5 + GPIO_DATA_OUTPUT))
-#define GPIO_DIRECTION_CONTROL_5     ((unsigned int)(OMAP730_GPIO_BASE_5 + GPIO_DIRECTION_CONTROL))
-#define GPIO_INTERRUPT_CONTROL_5     ((unsigned int)(OMAP730_GPIO_BASE_5 + GPIO_INTERRUPT_CONTROL))
-#define GPIO_INTERRUPT_MASK_5        ((unsigned int)(OMAP730_GPIO_BASE_5 + GPIO_INTERRUPT_MASK))
-#define GPIO_INTERRUPT_STATUS_5      ((unsigned int)(OMAP730_GPIO_BASE_5 + GPIO_INTERRUPT_STATUS))
-
-#define GPIO_DATA_INPUT_6            ((unsigned int)(OMAP730_GPIO_BASE_6 + GPIO_DATA_INPUT))
-#define GPIO_DATA_OUTPUT_6           ((unsigned int)(OMAP730_GPIO_BASE_6 + GPIO_DATA_OUTPUT))
-#define GPIO_DIRECTION_CONTROL_6     ((unsigned int)(OMAP730_GPIO_BASE_6 + GPIO_DIRECTION_CONTROL))
-#define GPIO_INTERRUPT_CONTROL_6     ((unsigned int)(OMAP730_GPIO_BASE_6 + GPIO_INTERRUPT_CONTROL))
-#define GPIO_INTERRUPT_MASK_6        ((unsigned int)(OMAP730_GPIO_BASE_6 + GPIO_INTERRUPT_MASK))
-#define GPIO_INTERRUPT_STATUS_6      ((unsigned int)(OMAP730_GPIO_BASE_6 + GPIO_INTERRUPT_STATUS))
-
-/***************************************************************************
- * OMAP730 Watchdog timers
- **************************************************************************/
-
-#define WDTIM_BASE                 0xFFFEC800
-#define WDTIM_CONTROL              (WDTIM_BASE + 0x00)    /* MPU_CNTL_TIMER */
-#define WDTIM_LOAD                 (WDTIM_BASE + 0x04)    /* MPU_LOAD_TIMER */
-#define WDTIM_READ                 (WDTIM_BASE + 0x04)    /* MPU_READ_TIMER */
-#define WDTIM_MODE                 (WDTIM_BASE + 0x08)    /* MPU_TIMER_MODE */
-
-/***************************************************************************
- * OMAP730 Interrupt Registers
- **************************************************************************/
-
-/* Interrupt Register offsets */
-
-#define IRQ_ITR                               0x00
-#define IRQ_MIR                               0x04
-#define IRQ_SIR_IRQ                           0x10
-#define IRQ_SIR_FIQ                           0x14
-#define IRQ_CONTROL_REG                       0x18
-#define IRQ_ILR0                              0x1C  /* ILRx == ILR0 + (0x4 * x) */
-#define IRQ_SIR                               0x9C  /* a.k.a.IRQ_ISR */
-#define IRQ_GMIR                              0xA0
-
-#define REG_IHL1_MIR  (OMAP_IH1_BASE + IRQ_MIR)
-#define REG_IHL2_MIR  (OMAP_IH2_BASE + IRQ_MIR)
-
-/***************************************************************************
- * OMAP730 Intersystem Communication Register                      (TRM 4.5)
- **************************************************************************/
-
-#define ICR_BASE                   0xFFFBB800
-
-#define M_ICR                      (ICR_BASE + 0x00)
-#define G_ICR                      (ICR_BASE + 0x02)
-#define M_CTL                      (ICR_BASE + 0x04)
-#define G_CTL                      (ICR_BASE + 0x06)
-#define PM_BA                      (ICR_BASE + 0x0A)
-#define DM_BA                      (ICR_BASE + 0x0C)
-#define RM_BA                      (ICR_BASE + 0x0E)
-#define SSPI_TAS                   (ICR_BASE + 0x12)
-
-#endif /* ! __INCLUDED_OMAP730_H */
diff --git a/include/configs/omap730p2.h b/include/configs/omap730p2.h
deleted file mode 100644
index 947f27bae5..0000000000
--- a/include/configs/omap730p2.h
+++ /dev/null
@@ -1,173 +0,0 @@
-/*
- * (C) Copyright 2003-2004
- * MPC Data Limited (http://www.mpc-data.co.uk)
- * Dave Peverley <dpeverley at mpc-data.co.uk>
- *
- * Configuation settings for the TI OMAP Perseus 2 board.
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-/* allow to overwrite serial and ethaddr */
-#define CONFIG_ENV_OVERWRITE
-
-/*
- * High Level Configuration Options
- * (easy to change)
- */
-
-#define CONFIG_ARM926EJS	   1	     /* This is an arm926ejs CPU core  */
-#define CONFIG_OMAP		   1	     /* in a TI OMAP core    */
-#define CONFIG_OMAP730		   1	     /* which is in a 730  */
-#define CONFIG_P2_OMAP730	   1	     /*	 a Perseus 2 Board  */
-
-/*
- * Input clock of PLL
- * The OMAP730 Perseus 2 has 13MHz input clock
- */
-
-#define CONFIG_SYS_CLK_FREQ	   13000000
-
-#define CONFIG_CMDLINE_TAG	   1	     /* enable passing of ATAGs	 */
-#define CONFIG_SETUP_MEMORY_TAGS   1
-
-/*
- * Size of malloc() pool
- */
-
-#define CONFIG_SYS_MALLOC_LEN		   (CONFIG_ENV_SIZE + 128*1024)
-
-/*
- * Hardware drivers
- */
-
-#define CONFIG_LAN91C96
-#define CONFIG_LAN91C96_BASE	   0x04000300
-#define CONFIG_LAN91C96_EXT_PHY
-
-/*
- * NS16550 Configuration
- */
-
-#define CONFIG_SYS_NS16550
-#define CONFIG_SYS_NS16550_SERIAL
-#define CONFIG_SYS_NS16550_REG_SIZE	   (1)
-#define CONFIG_SYS_NS16550_CLK		   (48000000)	  /* can be 12M/32Khz or 48Mhz */
-#define CONFIG_SYS_NS16550_COM1	   0xfffb0000	  /* uart1, bluetooth uart
-						   * on perseus */
-
-/*
- * select serial console configuration
- */
-
-#define CONFIG_SERIAL1		   1	     /* we use SERIAL 1 on OMAP730 Perseus 2 */
-
-#define CONFIG_CONS_INDEX	   1
-#define CONFIG_BAUDRATE		   115200
-
-/*
- * Command line configuration.
- */
-#include <config_cmd_default.h>
-
-#define CONFIG_CMD_DHCP
-
-
-/*
- * BOOTP options
- */
-#define CONFIG_BOOTP_SUBNETMASK
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_HOSTNAME
-#define CONFIG_BOOTP_BOOTPATH
-
-
-#include <configs/omap730.h>
-#include <configs/h2_p2_dbg_board.h>
-
-#define CONFIG_BOOTDELAY	   3
-#define CONFIG_BOOTARGS		   "mem=32M console=ttyS0,115200n8 noinitrd root=/dev/nfs rw ip=bootp"
-
-#define CONFIG_LOADADDR		   0x10000000
-
-#define CONFIG_ETHADDR
-#define CONFIG_NETMASK		   255.255.255.0
-#define CONFIG_IPADDR		   192.168.0.23
-#define CONFIG_SERVERIP		   192.150.0.100
-#define CONFIG_BOOTFILE		   "uImage"  /* File to load */
-
-#if defined(CONFIG_CMD_KGDB)
-#define CONFIG_KGDB_BAUDRATE	   115200    /* Speed to run kgdb serial port */
-#define CONFIG_KGDB_SER_INDEX	   1	     /* Which serial port to use */
-#endif
-
-/*
- * Miscellaneous configurable options
- */
-
-#define CONFIG_SYS_LONGHELP				       /* undef to save memory	   */
-#define CONFIG_SYS_PROMPT		   "OMAP730 P2 # "     /* Monitor Command Prompt   */
-#define CONFIG_SYS_CBSIZE		   256		       /* Console I/O Buffer Size  */
-/* Print Buffer Size */
-#define CONFIG_SYS_PBSIZE		   (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)
-#define CONFIG_SYS_MAXARGS		   16		       /* max number of command args   */
-#define CONFIG_SYS_BARGSIZE		   CONFIG_SYS_CBSIZE	       /* Boot Argument Buffer Size    */
-
-#define CONFIG_SYS_MEMTEST_START	   0x10000000	       /* memtest works on */
-#define CONFIG_SYS_MEMTEST_END		   0x12000000	       /* 32 MB in DRAM	   */
-
-#define CONFIG_SYS_LOAD_ADDR		   0x10000000	       /* default load address */
-
-/* The OMAP730 has 3 general purpose MPU timers, they can be driven by
- * the RefClk (12Mhz) or by DPLL1. This time is further subdivided by a
- * local divisor.
- */
-#define CONFIG_SYS_TIMERBASE		0xFFFEC500	/* use timer 1 */
-#define CONFIG_SYS_PTV			7	/* 2^(PTV+1), divide by 256 */
-#define CONFIG_SYS_HZ			((CONFIG_SYS_CLK_FREQ)/(2 << CONFIG_SYS_PTV))
-
-/*-----------------------------------------------------------------------
- * Physical Memory Map
- */
-
-#define CONFIG_NR_DRAM_BANKS	   1		  /* we have 1 bank of DRAM */
-#define PHYS_SDRAM_1		   0x10000000	  /* SDRAM Bank #1 */
-#define PHYS_SDRAM_1_SIZE	   0x02000000	  /* 32 MB */
-
-#if defined(CONFIG_CS0_BOOT)
-#define PHYS_FLASH_1		   0x0C000000
-#elif defined(CONFIG_CS3_BOOT)
-#define PHYS_FLASH_1		   0x00000000
-#else
-#error Unknown Boot Chip-Select number
-#endif
-
-#define PHYS_SRAM		0x20000000
-
-#define CONFIG_SYS_FLASH_BASE		   PHYS_FLASH_1
-
-/*-----------------------------------------------------------------------
- * FLASH and environment organization
- */
-
-#define CONFIG_SYS_MAX_FLASH_BANKS	   1		  /* max number of memory banks */
-#define PHYS_FLASH_SIZE		   0x02000000	  /* 32MB */
-#define CONFIG_SYS_MAX_FLASH_SECT	   (259)	  /* max number of sectors on one chip */
-/* addr of environment */
-#define CONFIG_ENV_ADDR		   (CONFIG_SYS_FLASH_BASE + 0x020000)
-
-/* timeout values are in ticks */
-#define CONFIG_SYS_FLASH_ERASE_TOUT	    (20*CONFIG_SYS_HZ)	  /* Timeout for Flash Erase */
-#define CONFIG_SYS_FLASH_WRITE_TOUT	    (20*CONFIG_SYS_HZ)	  /* Timeout for Flash Write */
-
-#define CONFIG_ENV_IS_IN_FLASH	   1
-#define CONFIG_ENV_SIZE		   0x20000	  /* Total Size of Environment Sector */
-#define CONFIG_ENV_OFFSET		   0x20000	  /* environment starts here  */
-
-#define CONFIG_SYS_SDRAM_BASE		PHYS_SDRAM_1
-#define CONFIG_SYS_INIT_SP_ADDR 	PHYS_SRAM
-
-#endif	  /* ! __CONFIG_H */
diff --git a/include/configs/otc570.h b/include/configs/otc570.h
index 3f4e0734ab..629967d054 100644
--- a/include/configs/otc570.h
+++ b/include/configs/otc570.h
@@ -193,8 +193,8 @@
 # define CONFIG_SYS_NAND_DBW_8
 # define CONFIG_SYS_NAND_MASK_ALE		(1 << 21)
 # define CONFIG_SYS_NAND_MASK_CLE		(1 << 22)
-# define CONFIG_SYS_NAND_ENABLE_PIN		AT91_PIO_PORTD, 15
-# define CONFIG_SYS_NAND_READY_PIN		AT91_PIO_PORTA, 22
+# define CONFIG_SYS_NAND_ENABLE_PIN		GPIO_PIN_PD(15)
+# define CONFIG_SYS_NAND_READY_PIN		GPIO_PIN_PA(22)
 #endif
 
 /* Ethernet */
diff --git a/include/configs/pm9261.h b/include/configs/pm9261.h
index fc95cf0bfa..4a71927217 100644
--- a/include/configs/pm9261.h
+++ b/include/configs/pm9261.h
@@ -50,15 +50,13 @@
 #define	CONFIG_SYS_MCKR1_VAL		\
 		(AT91_PMC_MCKR_CSS_SLOW |	\
 		 AT91_PMC_MCKR_PRES_1 |	\
-		 AT91_PMC_MCKR_MDIV_2 |	\
-		 AT91_PMC_MCKR_PLLADIV_1)
+		 AT91_PMC_MCKR_MDIV_2)
 
 /* PCK/2 = MCK Master Clock from PLLA */
 #define	CONFIG_SYS_MCKR2_VAL		\
 		(AT91_PMC_MCKR_CSS_PLLA |	\
 		 AT91_PMC_MCKR_PRES_1 |	\
-		 AT91_PMC_MCKR_MDIV_2 |	\
-		 AT91_PMC_MCKR_PLLADIV_1)
+		 AT91_PMC_MCKR_MDIV_2)
 
 /* define PDC[31:16] as DATA[31:16] */
 #define CONFIG_SYS_PIOC_PDR_VAL1	0xFFFF0000
@@ -166,9 +164,9 @@
 
 /* LED */
 #define CONFIG_AT91_LED
-#define	CONFIG_RED_LED		AT91_PIO_PORTC, 12
-#define	CONFIG_GREEN_LED	AT91_PIO_PORTC, 13
-#define	CONFIG_YELLOW_LED	AT91_PIO_PORTC, 15
+#define CONFIG_RED_LED		GPIO_PIN_PC(12)
+#define CONFIG_GREEN_LED	GPIO_PIN_PC(13)
+#define CONFIG_YELLOW_LED	GPIO_PIN_PC(15)
 
 #define CONFIG_BOOTDELAY	3
 
@@ -221,8 +219,8 @@
 #define CONFIG_SYS_NAND_MASK_ALE		(1 << 22)
 /* our CLE is AD21 */
 #define CONFIG_SYS_NAND_MASK_CLE		(1 << 21)
-#define CONFIG_SYS_NAND_ENABLE_PIN		AT91_PIO_PORTC, 14
-#define CONFIG_SYS_NAND_READY_PIN		AT91_PIO_PORTA, 16
+#define CONFIG_SYS_NAND_ENABLE_PIN		GPIO_PIN_PC(14)
+#define CONFIG_SYS_NAND_READY_PIN		GPIO_PIN_PA(16)
 
 /* NOR flash */
 #define CONFIG_SYS_FLASH_CFI			1
diff --git a/include/configs/pm9263.h b/include/configs/pm9263.h
index 533e249a7c..d9c04d14b9 100644
--- a/include/configs/pm9263.h
+++ b/include/configs/pm9263.h
@@ -179,8 +179,8 @@
 
 /* LED */
 #define CONFIG_AT91_LED
-#define	CONFIG_RED_LED		AT91_PIO_PORTB, 7	/* this is the power led */
-#define	CONFIG_GREEN_LED	AT91_PIO_PORTB, 8	/* this is the user1 led */
+#define CONFIG_RED_LED		GPIO_PIN_PB(7) /* this is the power led */
+#define CONFIG_GREEN_LED	GPIO_PIN_PB(8) /* this is the user1 led */
 
 #define CONFIG_BOOTDELAY	3
 
@@ -241,8 +241,8 @@
 #define CONFIG_SYS_NAND_MASK_ALE	(1 << 21)
 /* our CLE is AD22 */
 #define CONFIG_SYS_NAND_MASK_CLE	(1 << 22)
-#define CONFIG_SYS_NAND_ENABLE_PIN	AT91_PIO_PORTD, 15
-#define CONFIG_SYS_NAND_READY_PIN	AT91_PIO_PORTB, 30
+#define CONFIG_SYS_NAND_ENABLE_PIN	GPIO_PIN_PD(15)
+#define CONFIG_SYS_NAND_READY_PIN	GPIO_PIN_PB(30)
 
 #endif
 
diff --git a/include/configs/pm9g45.h b/include/configs/pm9g45.h
index e0c388e70c..f78e0ec173 100644
--- a/include/configs/pm9g45.h
+++ b/include/configs/pm9g45.h
@@ -54,8 +54,8 @@
 
 /* LED */
 #define CONFIG_AT91_LED
-#define	CONFIG_RED_LED		AT91_PIO_PORTD, 31 /* this is the user1 led */
-#define	CONFIG_GREEN_LED	AT91_PIO_PORTD, 0 /* this is the user2 led */
+#define CONFIG_RED_LED		GPIO_PIN_PD(31) /* this is the user1 led */
+#define CONFIG_GREEN_LED	GPIO_PIN_PD(0)  /* this is the user2 led */
 
 #define CONFIG_BOOTDELAY	3
 
@@ -106,8 +106,8 @@
 #define CONFIG_SYS_NAND_MASK_ALE	(1 << 21)
 /* our CLE is AD22 */
 #define CONFIG_SYS_NAND_MASK_CLE	(1 << 22)
-#define CONFIG_SYS_NAND_ENABLE_PIN	AT91_PIO_PORTC, 14
-#define CONFIG_SYS_NAND_READY_PIN	AT91_PIO_PORTD, 3
+#define CONFIG_SYS_NAND_ENABLE_PIN	GPIO_PIN_PC(14)
+#define CONFIG_SYS_NAND_READY_PIN	GPIO_PIN_PD(3)
 
 #endif
 
diff --git a/include/configs/pxm2.h b/include/configs/pxm2.h
index 20b0f9ab4d..7722f7be2e 100644
--- a/include/configs/pxm2.h
+++ b/include/configs/pxm2.h
@@ -70,6 +70,7 @@
 	"hostname=pxm2\0" \
 	"nand_img_size=0x500000\0" \
 	"optargs=\0" \
+	"splashpos=m,m\0"	\
 	CONFIG_COMMON_ENV_SETTINGS \
 	"mmc_dev=0\0" \
 	"mmc_root=/dev/mmcblk0p2 rw\0" \
@@ -118,9 +119,7 @@
 		"fi;" \
 	"fi;" \
 	"run nand_boot;" \
-	"if ping ${serverip}; then " \
-		"run net_nfs; " \
-	"fi; "
+	"reset;"
 
 #else
 #define CONFIG_BOOTDELAY		0
@@ -148,6 +147,8 @@
 #define DA8XX_LCD_CNTL_BASE	LCD_CNTL_BASE
 #define PWM_TICKS	0x1388
 #define PWM_DUTY	0x200
+#define CONFIG_SYS_CONSOLE_BG_COL	0xff
+#define CONFIG_SYS_CONSOLE_FG_COL	0x00
 #endif
 
 #endif	/* ! __CONFIG_PXM2_H */
diff --git a/include/configs/rut.h b/include/configs/rut.h
index 7c94644de8..d4519f946c 100644
--- a/include/configs/rut.h
+++ b/include/configs/rut.h
@@ -65,7 +65,8 @@
 /* Default env settings */
 #define CONFIG_EXTRA_ENV_SETTINGS \
 	"hostname=rut\0" \
-	"splashpos=488,352\0" \
+	"nand_img_size=0x500000\0" \
+	"splashpos=m,m\0" \
 	"optargs=fixrtc --no-log consoleblank=0 \0" \
 	CONFIG_COMMON_ENV_SETTINGS \
 	"mmc_dev=0\0" \
@@ -111,9 +112,7 @@
 		"fi;" \
 	"fi;" \
 	"run nand_boot;" \
-	"if ping ${serverip}; then " \
-		"run net_nfs; " \
-	"fi; "
+	"reset;"
 
 #else
 #define CONFIG_BOOTDELAY		0
@@ -151,6 +150,9 @@
 #define BOARD_LCD_RESET		115	/* Bank 3 pin 19 */
 #define CONFIG_ARCH_EARLY_INIT_R
 #define CONFIG_FORMIKE
+#define DISPL_PLL_SPREAD_SPECTRUM
+#define CONFIG_SYS_CONSOLE_BG_COL	0xff
+#define CONFIG_SYS_CONSOLE_FG_COL	0x00
 #endif
 
 #endif	/* ! __CONFIG_RUT_H */
diff --git a/include/configs/sama5d3xek.h b/include/configs/sama5d3xek.h
index 5a6f0fc708..c34feb5081 100644
--- a/include/configs/sama5d3xek.h
+++ b/include/configs/sama5d3xek.h
@@ -24,7 +24,10 @@
 #define CONFIG_AT91FAMILY
 #define CONFIG_ARCH_CPU_INIT
 
+#ifndef CONFIG_SPL_BUILD
 #define CONFIG_SKIP_LOWLEVEL_INIT
+#endif
+
 #define CONFIG_BOARD_EARLY_INIT_F
 #define CONFIG_DISPLAY_CPUINFO
 
@@ -93,8 +96,12 @@
 #define CONFIG_SYS_SDRAM_BASE           ATMEL_BASE_DDRCS
 #define CONFIG_SYS_SDRAM_SIZE		0x20000000
 
+#ifdef CONFIG_SPL_BUILD
+#define CONFIG_SYS_INIT_SP_ADDR		0x310000
+#else
 #define CONFIG_SYS_INIT_SP_ADDR \
 	(CONFIG_SYS_SDRAM_BASE + 4 * 1024 - GENERATED_GBL_DATA_SIZE)
+#endif
 
 /* SerialFlash */
 #define CONFIG_CMD_SF
@@ -235,4 +242,31 @@
 /* Size of malloc() pool */
 #define CONFIG_SYS_MALLOC_LEN		(1024 * 1024)
 
+/* SPL */
+#define CONFIG_SPL
+#define CONFIG_SPL_FRAMEWORK
+#define CONFIG_SPL_TEXT_BASE		0x300000
+#define CONFIG_SPL_MAX_SIZE		0x10000
+#define CONFIG_SPL_BSS_START_ADDR	0x20000000
+#define CONFIG_SPL_BSS_MAX_SIZE		0x80000
+#define CONFIG_SYS_SPL_MALLOC_START	0x20080000
+#define CONFIG_SYS_SPL_MALLOC_SIZE	0x80000
+
+#define CONFIG_SPL_LIBCOMMON_SUPPORT
+#define CONFIG_SPL_LIBGENERIC_SUPPORT
+#define CONFIG_SPL_GPIO_SUPPORT
+#define CONFIG_SPL_SERIAL_SUPPORT
+
+#define CONFIG_SPL_BOARD_INIT
+#ifdef CONFIG_SYS_USE_MMC
+#define CONFIG_SPL_LDSCRIPT		arch/arm/cpu/at91-common/u-boot-spl.lds
+#define CONFIG_SPL_MMC_SUPPORT
+#define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS	0x400
+#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x200
+#define CONFIG_SYS_MMC_SD_FAT_BOOT_PARTITION	1
+#define CONFIG_SPL_FAT_LOAD_PAYLOAD_NAME	"u-boot.img"
+#define CONFIG_SPL_FAT_SUPPORT
+#define CONFIG_SPL_LIBDISK_SUPPORT
+#endif
+
 #endif
diff --git a/include/configs/sbc35_a9g20.h b/include/configs/sbc35_a9g20.h
index cbcd4e16b2..7e16c451c3 100644
--- a/include/configs/sbc35_a9g20.h
+++ b/include/configs/sbc35_a9g20.h
@@ -115,6 +115,7 @@
 #define CONFIG_NET_RETRY_COUNT		20
 #define CONFIG_RESET_PHY_R
 #define CONFIG_MACB_SEARCH_PHY
+#define CONFIG_AT91_WANTS_COMMON_PHY
 
 /* USB */
 #define CONFIG_USB_ATMEL
diff --git a/include/configs/siemens-am33x-common.h b/include/configs/siemens-am33x-common.h
index f37653fea3..4569fd4840 100644
--- a/include/configs/siemens-am33x-common.h
+++ b/include/configs/siemens-am33x-common.h
@@ -254,11 +254,11 @@
 #define CONFIG_USB_GADGET
 #define CONFIG_USBDOWNLOAD_GADGET
 
-/* USB TI's IDs */
+/* USB DRACO ID as default */
 #define CONFIG_USBD_HS
-#define CONFIG_G_DNL_VENDOR_NUM 0x0525
-#define CONFIG_G_DNL_PRODUCT_NUM 0x4a47
-#define CONFIG_G_DNL_MANUFACTURER "Texas Instruments"
+#define CONFIG_G_DNL_VENDOR_NUM 0x0908
+#define CONFIG_G_DNL_PRODUCT_NUM 0x02d2
+#define CONFIG_G_DNL_MANUFACTURER "Siemens AG"
 
 /* USB Device Firmware Update support */
 #define CONFIG_DFU_FUNCTION
@@ -358,31 +358,38 @@
 #define CONFIG_COMMON_ENV_SETTINGS \
 	"verify=no \0" \
 	"project_dir=systemone\0" \
+	"upgrade_available=0\0" \
+	"altbootcmd=run bootcmd\0" \
+	"bootlimit=3\0" \
+	"partitionset_active=A\0" \
 	"loadaddr=0x82000000\0" \
 	"kloadaddr=0x81000000\0" \
 	"script_addr=0x81900000\0" \
-	"console=console=ttyMTD,mtdoops console=ttyO0,115200n8\0" \
-	"active_set=a\0" \
+	"console=console=ttyMTD,mtdoops console=ttyO0,115200n8 panic=5\0" \
 	"nand_active_ubi_vol=rootfs_a\0" \
+	"nand_active_ubi_vol_A=rootfs_a\0" \
+	"nand_active_ubi_vol_B=rootfs_b\0" \
 	"nand_root_fs_type=ubifs rootwait=1\0" \
 	"nand_src_addr=0x280000\0" \
-	"nand_src_addr_a=0x280000\0" \
-	"nand_src_addr_b=0x780000\0" \
+	"nand_src_addr_A=0x280000\0" \
+	"nand_src_addr_B=0x780000\0" \
 	"nfsopts=nolock rw mem=128M\0" \
 	"ip_method=none\0" \
 	"bootenv=uEnv.txt\0" \
 	"bootargs_defaults=setenv bootargs " \
 		"console=${console} " \
+		"${testargs} " \
 		"${optargs}\0" \
 	"nand_args=run bootargs_defaults;" \
 		"mtdparts default;" \
-		"setenv nand_active_ubi_vol rootfs_${active_set};" \
-		"setenv ${active_set} true;" \
-		"if test -n ${a}; then " \
-			"setenv nand_src_addr ${nand_src_addr_a};" \
+		"setenv ${partitionset_active} true;" \
+		"if test -n ${A}; then " \
+			"setenv nand_active_ubi_vol ${nand_active_ubi_vol_A};" \
+			"setenv nand_src_addr ${nand_src_addr_A};" \
 		"fi;" \
-		"if test -n ${b}; then " \
-			"setenv nand_src_addr ${nand_src_addr_b};" \
+		"if test -n ${B}; then " \
+			"setenv nand_active_ubi_vol ${nand_active_ubi_vol_B};" \
+			"setenv nand_src_addr ${nand_src_addr_B};" \
 		"fi;" \
 		"setenv nand_root ubi0:${nand_active_ubi_vol} rw " \
 		"ubi.mtd=9,2048;" \
@@ -403,9 +410,26 @@
 		"setenv bootargs ${bootargs} " \
 		"root=/dev/nfs ${mtdparts} " \
 		"nfsroot=${serverip}:${rootpath},${nfsopts} " \
-		"addip=setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:" \
+		"ip=${ipaddr}:${serverip}:" \
 		"${gatewayip}:${netmask}:${hostname}:eth0:off\0" \
-	"nand_boot=echo Booting from nand, active set ${active_set} ...; " \
+	"nand_boot=echo Booting from nand; " \
+		"if test ${upgrade_available} -eq 1; then " \
+			"if test ${bootcount} -gt ${bootlimit}; " \
+				"then " \
+				"setenv upgrade_available 0;" \
+				"setenv ${partitionset_active} true;" \
+				"if test -n ${A}; then " \
+					"setenv partitionset_active B; " \
+					"env delete A; " \
+				"fi;" \
+				"if test -n ${B}; then " \
+					"setenv partitionset_active A; " \
+					"env delete B; " \
+				"fi;" \
+				"saveenv; " \
+			"fi;" \
+		"fi;" \
+		"echo set ${partitionset_active}...;" \
 		"run nand_args; " \
 		"nand read.i ${kloadaddr} ${nand_src_addr} " \
 		"${nand_img_size}; bootm ${kloadaddr}\0" \
@@ -414,7 +438,7 @@
 		"tftpboot ${kloadaddr} ${serverip}:${bootfile}; " \
 		"bootm ${kloadaddr}\0" \
 	"flash_self=run nand_boot\0" \
-	"flash_self_test=setenv bootargs_defaults ${bootargs_defaults} test; " \
+	"flash_self_test=setenv testargs test; " \
 		"run nand_boot\0" \
 	"dfu_start=echo Preparing for dfu mode ...; " \
 		"run dfu_args; \0" \
@@ -425,8 +449,9 @@
 		"mode; echo Not ready yet: 'run flash_nfs' to use kernel " \
 		"from memory and root filesystem over NFS; echo Type " \
 		"'run net_nfs' to get Kernel over TFTP and mount root " \
-		"filesystem over NFS; echo Set active_set variable to 'a' " \
-		"or 'b' to select kernel and rootfs partition; " \
+		"filesystem over NFS; " \
+		"echo Set partitionset_active variable to 'A' " \
+		"or 'B' to select kernel and rootfs partition; " \
 		"echo" \
 		"\0"
 
@@ -457,4 +482,15 @@
 #define CONFIG_AUTOBOOT_PROMPT	"Autobooting in %d seconds, "		\
 				"press \"<Esc><Esc>\" to stop\n", bootdelay
 
+/* Reboot after 60 sec if bootcmd fails */
+#define CONFIG_RESET_TO_RETRY
+#define CONFIG_BOOT_RETRY_TIME 60
+
+#define CONFIG_BOOTCOUNT_LIMIT
+#define CONFIG_BOOTCOUNT_ENV
+
+/* Enable Device-Tree (FDT) support */
+#define CONFIG_OF_LIBFDT
+#define CONFIG_CMD_FDT
+
 #endif	/* ! __CONFIG_SIEMENS_AM33X_COMMON_H */
diff --git a/include/configs/snapper9260.h b/include/configs/snapper9260.h
index 5436bae15e..94a65c4d01 100644
--- a/include/configs/snapper9260.h
+++ b/include/configs/snapper9260.h
@@ -59,6 +59,7 @@
 #define CONFIG_RMII
 #define CONFIG_NET_RETRY_COUNT		20
 #define CONFIG_RESET_PHY_R
+#define CONFIG_AT91_WANTS_COMMON_PHY
 #define CONFIG_TFTP_PORT
 #define CONFIG_TFTP_TSIZE
 
@@ -74,7 +75,6 @@
 #define CONFIG_USB_STORAGE
 
 /* GPIOs and IO expander */
-#define CONFIG_AT91_LEGACY
 #define CONFIG_ATMEL_LEGACY
 #define CONFIG_AT91_GPIO
 #define CONFIG_AT91_GPIO_PULLUP		1
diff --git a/include/configs/stamp9g20.h b/include/configs/stamp9g20.h
index 248e657e4c..51339b1496 100644
--- a/include/configs/stamp9g20.h
+++ b/include/configs/stamp9g20.h
@@ -145,6 +145,7 @@
 #ifdef CONFIG_MACB
 # define CONFIG_RMII			/* use reduced MII inteface */
 # define CONFIG_NET_RETRY_COUNT	20      /* # of DHCP/BOOTP retries */
+#define CONFIG_AT91_WANTS_COMMON_PHY
 
 /* BOOTP and DHCP options */
 # define CONFIG_BOOTP_BOOTFILESIZE
diff --git a/include/configs/taurus.h b/include/configs/taurus.h
new file mode 100644
index 0000000000..c98002317f
--- /dev/null
+++ b/include/configs/taurus.h
@@ -0,0 +1,160 @@
+/*
+ * Common board functions for Siemens TAURUS (AT91SAM9G20) based boards
+ * (C) Copyright 2013 Siemens AG
+ *
+ * Based on:
+ * U-Boot file: include/configs/at91sam9260ek.h
+ *
+ * (C) Copyright 2007-2008
+ * Stelian Pop <stelian@popies.net>
+ * Lead Tech Design <www.leadtechdesign.com>
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+/*
+ * SoC must be defined first, before hardware.h is included.
+ * In this case SoC is defined in boards.cfg.
+ */
+#include <asm/hardware.h>
+
+#define MACH_TYPE_TAURUS		2067
+#define MACH_TYPE_AXM			2068
+
+/*
+ * Warning: changing CONFIG_SYS_TEXT_BASE requires
+ * adapting the initial boot program.
+ * Since the linker has to swallow that define, we must use a pure
+ * hex number here!
+ */
+
+
+#define CONFIG_SYS_TEXT_BASE		0x23f00000
+
+/* ARM asynchronous clock */
+#define CONFIG_SYS_AT91_SLOW_CLOCK	32768		/* slow clock xtal */
+#define CONFIG_SYS_AT91_MAIN_CLOCK	18432000	/* main clock xtal */
+#define CONFIG_SYS_HZ			1000
+
+/* Misc CPU related */
+#define CONFIG_ARCH_CPU_INIT
+#define CONFIG_CMDLINE_TAG		/* enable passing of ATAGs */
+#define CONFIG_SETUP_MEMORY_TAGS
+#define CONFIG_INITRD_TAG
+#define CONFIG_SKIP_LOWLEVEL_INIT
+#define CONFIG_BOARD_EARLY_INIT_F
+#define CONFIG_DISPLAY_CPUINFO
+
+#define CONFIG_CMD_BOOTZ
+#define CONFIG_OF_LIBFDT
+
+/* general purpose I/O */
+#define CONFIG_ATMEL_LEGACY		/* required until (g)pio is fixed */
+#define CONFIG_AT91_GPIO
+#define CONFIG_AT91_GPIO_PULLUP	1	/* keep pullups on peripheral pins */
+
+/* serial console */
+#define CONFIG_ATMEL_USART
+#define CONFIG_USART_BASE		ATMEL_BASE_DBGU
+#define CONFIG_USART_ID			ATMEL_ID_SYS
+#define CONFIG_BAUDRATE			115200
+
+#define CONFIG_BOOTDELAY	3
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+#undef CONFIG_CMD_BDI
+#undef CONFIG_CMD_FPGA
+#undef CONFIG_CMD_IMI
+#undef CONFIG_CMD_IMLS
+#undef CONFIG_CMD_LOADS
+#undef CONFIG_CMD_SOURCE
+
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_NAND
+
+/*
+ * SDRAM: 1 bank, min 32, max 128 MB
+ * Initialized before u-boot gets started.
+ */
+#define CONFIG_NR_DRAM_BANKS		1
+#define CONFIG_SYS_SDRAM_BASE		ATMEL_BASE_CS1
+#define CONFIG_SYS_SDRAM_SIZE		(128 * 1024 * 1024)
+
+/*
+ * Initial stack pointer: 4k - GENERATED_GBL_DATA_SIZE in internal SRAM,
+ * leaving the correct space for initial global data structure above
+ * that address while providing maximum stack area below.
+ */
+# define CONFIG_SYS_INIT_SP_ADDR \
+	(ATMEL_BASE_SRAM1 + 0x1000 - GENERATED_GBL_DATA_SIZE)
+
+/* NAND flash */
+#ifdef CONFIG_CMD_NAND
+#define CONFIG_NAND_ATMEL
+#define CONFIG_SYS_MAX_NAND_DEVICE	1
+#define CONFIG_SYS_NAND_BASE		ATMEL_BASE_CS3
+#define CONFIG_SYS_NAND_DBW_8
+#define CONFIG_SYS_NAND_MASK_ALE	(1 << 21)
+#define CONFIG_SYS_NAND_MASK_CLE	(1 << 22)
+#define CONFIG_SYS_NAND_ENABLE_PIN	AT91_PIN_PC14
+#define CONFIG_SYS_NAND_READY_PIN	AT91_PIN_PC13
+#endif
+
+/* NOR flash - no real flash on this board */
+#define CONFIG_SYS_NO_FLASH			1
+
+/* Ethernet */
+#define CONFIG_MACB
+#define CONFIG_RMII
+#define CONFIG_AT91_WANTS_COMMON_PHY
+
+/* USB */
+#if defined(CONFIG_BOARD_TAURUS)
+#define CONFIG_USB_ATMEL
+#define CONFIG_USB_OHCI_NEW
+#define CONFIG_SYS_USB_OHCI_CPU_INIT
+#define CONFIG_SYS_USB_OHCI_REGS_BASE		0x00500000
+#define CONFIG_SYS_USB_OHCI_SLOT_NAME		"at91sam9260"
+#define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS	2
+#define CONFIG_USB_STORAGE
+#endif
+
+/* load address */
+#define CONFIG_SYS_LOAD_ADDR			0x22000000
+
+/* bootstrap in spi flash , u-boot + env + linux in nandflash */
+#define CONFIG_ENV_IS_IN_NAND
+#define CONFIG_ENV_OFFSET		0x100000
+#define CONFIG_ENV_OFFSET_REDUND	0x180000
+#define CONFIG_ENV_SIZE		0x20000		/* 1 sector = 128 kB */
+#define CONFIG_BOOTCOMMAND	"nand read 0x22000000 0x200000 0x300000; bootm"
+#define CONFIG_BOOTARGS							\
+	"console=ttyS0,115200 earlyprintk "				\
+	"mtdparts=atmel_nand:256k(bootstrap)ro,512k(uboot)ro,"		\
+	"256k(env),256k(env_redundant),256k(spare),"			\
+	"512k(dtb),6M(kernel)ro,-(rootfs) "				\
+	"root=/dev/mtdblock7 rw rootfstype=jffs2"
+
+#define CONFIG_SYS_PROMPT		"U-Boot> "
+#define CONFIG_SYS_CBSIZE		256
+#define CONFIG_SYS_MAXARGS		16
+#define CONFIG_SYS_PBSIZE \
+	(CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
+#define CONFIG_SYS_LONGHELP
+#define CONFIG_CMDLINE_EDITING
+#define CONFIG_AUTO_COMPLETE
+
+/*
+ * Size of malloc() pool
+ */
+#define CONFIG_SYS_MALLOC_LEN \
+	ROUND(3 * CONFIG_ENV_SIZE + 128*1024, 0x1000)
+
+#endif
diff --git a/include/configs/ti_am335x_common.h b/include/configs/ti_am335x_common.h
index 10fe47f4d6..4364eef7ba 100644
--- a/include/configs/ti_am335x_common.h
+++ b/include/configs/ti_am335x_common.h
@@ -18,6 +18,7 @@
 #define CONFIG_SYS_CACHELINE_SIZE       64
 #define CONFIG_MAX_RAM_BANK_SIZE	(1024 << 20)	/* 1GB */
 #define CONFIG_SYS_TIMERBASE		0x48040000	/* Use Timer2 */
+#define CONFIG_SPL_AM33XX_ENABLE_RTC32K_OSC
 
 #include <asm/arch/omap.h>
 
@@ -42,9 +43,9 @@
 
 /*
  * RTC related defines. To use bootcount you must set bootlimit in the
- * environment to a non-zero value.
+ * environment to a non-zero value and enable CONFIG_BOOTCOUNT_LIMIT
+ * in the board config.
  */
-#define CONFIG_BOOTCOUNT_LIMIT
 #define CONFIG_SYS_BOOTCOUNT_ADDR	0x44E3E000
 
 /* Enable the HW watchdog, since we can use this with bootcount */
diff --git a/include/configs/trats.h b/include/configs/trats.h
index f163303142..08771422ec 100644
--- a/include/configs/trats.h
+++ b/include/configs/trats.h
@@ -299,6 +299,7 @@
 #define CONFIG_USB_GADGET_S3C_UDC_OTG
 #define CONFIG_USB_GADGET_DUALSPEED
 #define CONFIG_USB_GADGET_VBUS_DRAW	2
+#define CONFIG_USB_CABLE_CHECK
 
 /* LCD */
 #define CONFIG_EXYNOS_FB
diff --git a/include/configs/trats2.h b/include/configs/trats2.h
index 3bcdfb140c..5d86a3d4e3 100644
--- a/include/configs/trats2.h
+++ b/include/configs/trats2.h
@@ -20,8 +20,6 @@
 #define CONFIG_EXYNOS4		/* which is in a EXYNOS4XXX */
 #define CONFIG_TIZEN		/* TIZEN lib */
 
-#define PLATFORM_NO_UNALIGNED
-
 #include <asm/arch/cpu.h>		/* get chip and board defs */
 
 #define CONFIG_ARCH_CPU_INIT
@@ -65,10 +63,9 @@
 
 #define CONFIG_DISPLAY_CPUINFO
 
-/*
- * Size of malloc() pool
- */
-#define CONFIG_SYS_MALLOC_LEN		(CONFIG_ENV_SIZE + (2 << 20))
+#include <asm/sizes.h>
+/* Size of malloc() pool */
+#define CONFIG_SYS_MALLOC_LEN		(CONFIG_ENV_SIZE + (80 * SZ_1M))
 
 /* select serial console configuration */
 #define CONFIG_SERIAL2
@@ -100,6 +97,7 @@
 #define CONFIG_CMD_CACHE
 #define CONFIG_CMD_I2C
 #define CONFIG_CMD_MMC
+#define CONFIG_CMD_DFU
 #define CONFIG_CMD_GPT
 #define CONFIG_CMD_PMIC
 
@@ -113,6 +111,23 @@
 #define CONFIG_CMD_EXT4
 #define CONFIG_CMD_EXT4_WRITE
 
+/* USB Composite download gadget - g_dnl */
+#define CONFIG_USBDOWNLOAD_GADGET
+#define CONFIG_SYS_DFU_DATA_BUF_SIZE SZ_32M
+#define CONFIG_DFU_FUNCTION
+#define CONFIG_DFU_MMC
+
+/* TIZEN THOR downloader support */
+#define CONFIG_CMD_THOR_DOWNLOAD
+#define CONFIG_THOR_FUNCTION
+
+/* USB Samsung's IDs */
+#define CONFIG_G_DNL_VENDOR_NUM 0x04E8
+#define CONFIG_G_DNL_PRODUCT_NUM 0x6601
+#define CONFIG_G_DNL_THOR_VENDOR_NUM CONFIG_G_DNL_VENDOR_NUM
+#define CONFIG_G_DNL_THOR_PRODUCT_NUM 0x685D
+#define CONFIG_G_DNL_MANUFACTURER "Samsung"
+
 /* To use the TFTPBOOT over USB, Please enable the CONFIG_CMD_NET */
 #undef CONFIG_CMD_NET
 
@@ -136,25 +151,29 @@
 #define CONFIG_SYS_CONSOLE_IS_IN_ENV
 
 /* Tizen - partitions definitions */
-#define PARTS_CSA		"csa-mmc"
-#define PARTS_BOOTLOADER	"u-boot"
+#define PARTS_CSA		"csa"
 #define PARTS_BOOT		"boot"
+#define PARTS_MODEM		"modem"
+#define PARTS_CSC		"csc"
 #define PARTS_ROOT		"platform"
 #define PARTS_DATA		"data"
-#define PARTS_CSC		"csc"
 #define PARTS_UMS		"ums"
 
 #define PARTS_DEFAULT \
-	"uuid_disk=${uuid_gpt_disk};" \
-	"name="PARTS_CSA",size=8MiB,uuid=${uuid_gpt_"PARTS_CSA"};" \
-	"name="PARTS_BOOTLOADER",size=60MiB," \
-		"uuid=${uuid_gpt_"PARTS_BOOTLOADER"};" \
-	"name="PARTS_BOOT",size=100MiB,uuid=${uuid_gpt_"PARTS_BOOT"};" \
-	"name="PARTS_ROOT",size=1GiB,uuid=${uuid_gpt_"PARTS_ROOT"};" \
-	"name="PARTS_DATA",size=3GiB,uuid=${uuid_gpt_"PARTS_DATA"};" \
+	"name="PARTS_CSA",start=5MiB,size=8MiB,uuid=${uuid_gpt_"PARTS_CSA"};" \
+	"name="PARTS_BOOT",size=64MiB,uuid=${uuid_gpt_"PARTS_BOOT"};" \
+	"name="PARTS_MODEM",size=100MiB,uuid=${uuid_gpt_"PARTS_MODEM"};" \
 	"name="PARTS_CSC",size=150MiB,uuid=${uuid_gpt_"PARTS_CSC"};" \
+	"name="PARTS_ROOT",size=1536MiB,uuid=${uuid_gpt_"PARTS_ROOT"};" \
+	"name="PARTS_DATA",size=512MiB,uuid=${uuid_gpt_"PARTS_DATA"};" \
 	"name="PARTS_UMS",size=-,uuid=${uuid_gpt_"PARTS_UMS"}\0" \
 
+#define CONFIG_DFU_ALT \
+	"u-boot mmc 80 800;" \
+	"uImage ext4 0 2;" \
+	"exynos4412-trats2.dtb ext4 0 2;" \
+	""PARTS_ROOT" part 0 5\0"
+
 #define CONFIG_EXTRA_ENV_SETTINGS \
 	"bootk=" \
 		"run loaddtb; run loaduimage; bootm 0x40007FC0 - ${fdtaddr}\0" \
@@ -178,15 +197,16 @@
 	"rootfstype=ext4\0" \
 	"console=" CONFIG_DEFAULT_CONSOLE \
 	"kernelname=uImage\0" \
-	"loaduimage=ext4load mmc ${mmcdev}:${mmcbootpart} 0x40007FC0 uImage\0" \
-		"0x40007FC0 ${kernelname}\0" \
+	"loaduimage=ext4load mmc ${mmcdev}:${mmcbootpart} 0x40007FC0 " \
+		"${kernelname}\0" \
 	"loaddtb=ext4load mmc ${mmcdev}:${mmcbootpart} ${fdtaddr} " \
 		"${fdtfile}\0" \
-	"mmcdev=0\0" \
+	"mmcdev=CONFIG_MMC_DEFAULT_DEV\0" \
 	"mmcbootpart=2\0" \
 	"mmcrootpart=5\0" \
 	"opts=always_resume=1\0" \
 	"partitions=" PARTS_DEFAULT \
+	"dfu_alt_info=" CONFIG_DFU_ALT \
 	"uartpath=ap\0" \
 	"usbpath=ap\0" \
 	"consoleon=set console console=ttySAC2,115200n8; save; reset\0" \
@@ -233,8 +253,6 @@
 #define CONFIG_SYS_INIT_SP_ADDR		(CONFIG_SYS_LOAD_ADDR \
 					- GENERATED_GBL_DATA_SIZE)
 
-#define CONFIG_SYS_HZ			1000
-
 /* valid baudrates */
 #define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
 
@@ -288,6 +306,11 @@ int get_soft_i2c_sda_pin(void);
 #define CONFIG_POWER_MUIC_MAX77693
 #define CONFIG_POWER_FG_MAX77693
 #define CONFIG_POWER_BATTERY_TRATS2
+#define CONFIG_USB_GADGET
+#define CONFIG_USB_GADGET_S3C_UDC_OTG
+#define CONFIG_USB_GADGET_DUALSPEED
+#define CONFIG_USB_GADGET_VBUS_DRAW	2
+#define CONFIG_USB_CABLE_CHECK
 
 /* LCD */
 #define CONFIG_EXYNOS_FB
@@ -300,6 +323,9 @@ int get_soft_i2c_sda_pin(void);
 #define CONFIG_VIDEO_BMP_GZIP
 #define CONFIG_SYS_VIDEO_LOGO_MAX_SIZE ((500 * 250 * 4) + (1 << 12))
 
+#define CONFIG_CMD_USB_MASS_STORAGE
+#define CONFIG_USB_GADGET_MASS_STORAGE
+
 /* Pass open firmware flat tree */
 #define CONFIG_OF_LIBFDT    1
 
diff --git a/include/configs/usb_a9263.h b/include/configs/usb_a9263.h
new file mode 100644
index 0000000000..c4d04dec38
--- /dev/null
+++ b/include/configs/usb_a9263.h
@@ -0,0 +1,169 @@
+/*
+ * (C) Copyright 2007-2013
+ * Stelian Pop <stelian.pop@leadtechdesign.com>
+ * Lead Tech Design <www.leadtechdesign.com>
+ * Thomas Petazzoni, Free Electrons, <thomas.petazzoni@free-electrons.com>
+ * Mateusz Kulikowski <mateusz.kulikowski@gmail.com>
+ *
+ * Settings for Calao USB-A9263 board
+ *
+ * U-Boot image has to be less than 200704 bytes, otherwise at91bootstrap
+ * installed on board will not be able to load it properly.
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+#include <asm/hardware.h>
+
+/* ARM asynchronous clock */
+#define CONFIG_SYS_AT91_MAIN_CLOCK	12000000	/* 12 MHz crystal */
+#define CONFIG_SYS_AT91_SLOW_CLOCK	32768
+#define CONFIG_SYS_HZ			1000
+
+#define CONFIG_MACH_TYPE		MACH_TYPE_USB_A9263
+
+#define CONFIG_ARCH_CPU_INIT
+
+#define CONFIG_CMDLINE_TAG	/* enable passing of ATAGs      */
+#define CONFIG_SETUP_MEMORY_TAGS
+#define CONFIG_INITRD_TAG
+
+#define CONFIG_SKIP_LOWLEVEL_INIT
+
+#define CONFIG_DISPLAY_CPUINFO
+
+#define CONFIG_OF_LIBFDT
+#define CONFIG_SYS_GENERIC_BOARD
+#define CONFIG_SYS_TEXT_BASE		0x23f00000
+
+/*
+ * Hardware drivers
+ */
+#define CONFIG_AT91_GPIO
+
+/* serial console */
+#define CONFIG_ATMEL_USART
+#define CONFIG_USART_BASE		ATMEL_BASE_DBGU
+#define CONFIG_USART_ID			ATMEL_ID_SYS
+#define CONFIG_BAUDRATE			115200
+
+#define CONFIG_BOOTDELAY 3
+
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+#undef CONFIG_CMD_BDI
+#undef CONFIG_CMD_FPGA
+#undef CONFIG_CMD_IMI
+#undef CONFIG_CMD_IMLS
+#undef CONFIG_CMD_ITEST
+#undef CONFIG_CMD_LOADB
+#undef CONFIG_CMD_LOADS
+
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_NAND
+
+/* SDRAM */
+#define CONFIG_NR_DRAM_BANKS		1
+#define CONFIG_SYS_SDRAM_BASE		ATMEL_BASE_CS1
+#define CONFIG_SYS_SDRAM_SIZE		0x04000000
+
+#define CONFIG_SYS_INIT_SP_ADDR \
+	(ATMEL_BASE_SRAM1 + 0x1000 - GENERATED_GBL_DATA_SIZE)
+
+/* DataFlash */
+#define CONFIG_ATMEL_DATAFLASH_SPI
+#define CONFIG_HAS_DATAFLASH
+#define CONFIG_SYS_SPI_WRITE_TOUT		(5*CONFIG_SYS_HZ)
+#define CONFIG_SYS_MAX_DATAFLASH_BANKS		1
+#define CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0	0xC0000000
+#define AT91_SPI_CLK				8000000
+#define DATAFLASH_TCSS				(0x1a << 16)
+#define DATAFLASH_TCHS				(0x1 << 24)
+
+/* no NOR flash */
+#define CONFIG_SYS_NO_FLASH
+
+/* NAND flash */
+#ifdef CONFIG_CMD_NAND
+#define CONFIG_NAND_ATMEL
+#define CONFIG_SYS_MAX_NAND_DEVICE		1
+#define CONFIG_SYS_NAND_BASE			ATMEL_BASE_CS3
+/* our ALE is AD21 */
+#define CONFIG_SYS_NAND_MASK_ALE		(1 << 21)
+/* our CLE is AD22 */
+#define CONFIG_SYS_NAND_MASK_CLE		(1 << 22)
+#define CONFIG_SYS_NAND_ENABLE_PIN		GPIO_PIN_PD(15)
+#define CONFIG_SYS_NAND_READY_PIN		GPIO_PIN_PA(22)
+#endif
+
+#define MTDPARTS_DEFAULT \
+	"mtdparts=atmel_nand:16m(kernel)ro,120m(root1),-(root2)"
+
+/* Ethernet */
+#define CONFIG_MACB
+#define CONFIG_RMII
+#define CONFIG_NET_RETRY_COUNT			20
+#define CONFIG_AT91_WANTS_COMMON_PHY
+
+/* USB */
+#ifdef CONFIG_CMD_USB
+#define CONFIG_USB_ATMEL
+#define CONFIG_USB_OHCI_NEW
+#define CONFIG_DOS_PARTITION
+#define CONFIG_SYS_USB_OHCI_CPU_INIT
+#define CONFIG_SYS_USB_OHCI_REGS_BASE		0x00a00000
+#define CONFIG_SYS_USB_OHCI_SLOT_NAME		"at91sam9263"
+#define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS	2
+#define CONFIG_USB_STORAGE
+#define CONFIG_CMD_FAT
+#endif
+
+#define CONFIG_SYS_LOAD_ADDR			0x22000000
+
+#define CONFIG_SYS_MEMTEST_START		CONFIG_SYS_SDRAM_BASE
+#define CONFIG_SYS_MEMTEST_END			0x23e00000
+
+/* bootstrap + u-boot + env in dataflash on CS0 */
+#define CONFIG_ENV_IS_IN_DATAFLASH
+#define CONFIG_SYS_MONITOR_BASE	(CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0 + 0x4000)
+#define CONFIG_ENV_OFFSET	0x2000
+#define CONFIG_ENV_ADDR		(CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0 + \
+				 CONFIG_ENV_OFFSET)
+#define CONFIG_ENV_SIZE		0x2000
+#define CONFIG_BOOTCOMMAND	"nboot 21000000 0"
+#define CONFIG_BOOTARGS		"console=ttyS0,115200 " \
+	"root=/dev/mtdblock1 " \
+	"mtdparts=" MTDPARTS_DEFAULT " " \
+	"rw rootfstype=jffs2"
+#define CONFIG_EXTRA_ENV_SETTINGS \
+	"mtdparts=" MTDPARTS_DEFAULT "\0" \
+
+#define CONFIG_SYS_PROMPT		"U-Boot> "
+#define CONFIG_SYS_CBSIZE		256
+#define CONFIG_SYS_MAXARGS		16
+#define CONFIG_SYS_PBSIZE		(CONFIG_SYS_CBSIZE + \
+					 sizeof(CONFIG_SYS_PROMPT) + 16)
+#define CONFIG_CMDLINE_EDITING
+#define CONFIG_AUTO_COMPLETE
+#define CONFIG_SYS_HUSH_PARSER
+#define CONFIG_SYS_LONGHELP
+
+/*
+ * Size of malloc() pool
+ */
+#define CONFIG_SYS_MALLOC_LEN	ROUND(3 * CONFIG_ENV_SIZE + 128*1024, 0x1000)
+
+#endif
diff --git a/include/configs/vexpress_common.h b/include/configs/vexpress_common.h
index 6da5e8f5db..7e78f8ac8f 100644
--- a/include/configs/vexpress_common.h
+++ b/include/configs/vexpress_common.h
@@ -132,7 +132,7 @@
 #define VEXPRESS_FLASHPROG_FLVPPEN	(1 << 0)
 
 #define CONFIG_SYS_TIMER_RATE		1000000
-#define CONFIG_SYS_TIMER_COUNTER	(0x10011000 + 0x4)
+#define CONFIG_SYS_TIMER_COUNTER	(V2M_TIMER01 + 0x4)
 #define CONFIG_SYS_TIMER_COUNTS_DOWN
 
 /* SMSC9115 Ethernet from SMSC9118 family */
diff --git a/include/configs/vl_ma2sc.h b/include/configs/vl_ma2sc.h
index 1489080041..88aaa95fb1 100644
--- a/include/configs/vl_ma2sc.h
+++ b/include/configs/vl_ma2sc.h
@@ -320,8 +320,8 @@
 #define CONFIG_SYS_NAND_DBW_8		1
 #define CONFIG_SYS_NAND_MASK_ALE	(1 << 21)	/* our ALE is AD21 */
 #define CONFIG_SYS_NAND_MASK_CLE	(1 << 22)	/* our CLE is AD22 */
-#define CONFIG_SYS_NAND_ENABLE_PIN	AT91_PIO_PORTD, 15
-#define CONFIG_SYS_NAND_READY_PIN	AT91_PIO_PORTB, 0
+#define CONFIG_SYS_NAND_ENABLE_PIN	GPIO_PIN_PD(15)
+#define CONFIG_SYS_NAND_READY_PIN	GPIO_PIN_PB(0)
 #define CONFIG_SYS_64BIT_VSPRINTF	/* needed for nand_util.c */
 #endif
 
@@ -330,6 +330,7 @@
 #define CONFIG_RMII
 #define CONFIG_NET_MULTI
 #define CONFIG_NET_RETRY_COUNT		5
+#define CONFIG_AT91_WANTS_COMMON_PHY
 
 #define CONFIG_OVERWRITE_ETHADDR_ONCE
 
diff --git a/include/i2c.h b/include/i2c.h
index c1be533d57..f93a18366e 100644
--- a/include/i2c.h
+++ b/include/i2c.h
@@ -147,7 +147,7 @@ extern struct i2c_bus_hose	i2c_bus[];
 
 # elif (defined(CONFIG_AT91RM9200) || \
 	defined(CONFIG_AT91SAM9260) ||  defined(CONFIG_AT91SAM9261) || \
-	defined(CONFIG_AT91SAM9263)) && !defined(CONFIG_AT91_LEGACY)
+	defined(CONFIG_AT91SAM9263))
 #  define I2C_SOFT_DECLARATIONS	at91_pio_t *pio	= (at91_pio_t *) ATMEL_BASE_PIOA;
 # else
 #  define I2C_SOFT_DECLARATIONS
diff --git a/include/twl6030.h b/include/twl6030.h
index b4035ba4fe..7898699eac 100644
--- a/include/twl6030.h
+++ b/include/twl6030.h
@@ -110,9 +110,47 @@
 #define CTRL_P2_EOCP2	(1 << 1)
 #define CTRL_P2_BUSY	(1 << 0)
 
+#define TWL6032_CTRL_P1	0x36
+#define CTRL_P1_SP1	(1 << 3)
+
 #define GPCH0_LSB	0x57
 #define GPCH0_MSB	0x58
 
+#define TWL6032_GPCH0_LSB	0x3b
+
+#define TWL6032_GPSELECT_ISB	0x35
+
+#define USB_PRODUCT_ID_LSB	0x02
+
+#define TWL6030_GPADC_VBAT_CHNL	0x07
+#define TWL6032_GPADC_VBAT_CHNL	0x12
+
+#define TWL6030_GPADC_CTRL	0x2e
+#define TWL6032_GPADC_CTRL2	0x2f
+#define GPADC_CTRL2_CH18_SCALER_EN	(1 << 2)
+#define GPADC_CTRL_SCALER_DIV4		(1 << 3)
+
+#define TWL6030_VBAT_MULT	40 * 1000
+#define TWL6032_VBAT_MULT	25 * 1000
+
+#define TWL6030_VBAT_SHIFT	(10 + 3)
+#define TWL6032_VBAT_SHIFT	(12 + 2)
+
+enum twl603x_chip_type{
+	chip_TWL6030,
+	chip_TWL6032,
+	chip_TWL603X_cnt
+};
+
+struct twl6030_data{
+	u8 chip_type;
+	u8 adc_rbase;
+	u8 adc_ctrl;
+	u8 adc_enable;
+	int vbat_mult;
+	int vbat_shift;
+};
+
 /* Functions to read and write from TWL6030 */
 static inline int twl6030_i2c_write_u8(u8 chip_no, u8 reg, u8 val)
 {
author	Tom Rini <trini@ti.com>	2013-12-10 17:15:18 -0500
committer	Tom Rini <trini@ti.com>	2013-12-10 17:15:18 -0500
commit	4b210ad34282bfd9fc982a8e3c9a9126f4094cdb (patch)
tree	f91ebdc46ede952728602d5ecc18e64ad0e52682
parent	65b7fe28a12bbaccc7a0c076f5f9f213150030e7 (diff)
parent	f15ea6e1d67782a1626d4a4922b6c20e380085e5 (diff)
download	talos-obmc-uboot-4b210ad34282bfd9fc982a8e3c9a9126f4094cdb.tar.gz talos-obmc-uboot-4b210ad34282bfd9fc982a8e3c9a9126f4094cdb.zip