include/configs: Use new CONFIG_CMD_* in various s* named board config files.

Signed-off-by: Jon Loeliger <jdl@freescale.com>

15 files changed, 272 insertions, 274 deletions

diff --git a/include/configs/sacsng.h b/include/configs/sacsng.h
index 97b52fa1ae..dc25831288 100644
--- a/include/configs/sacsng.h
+++ b/include/configs/sacsng.h
@@ -502,31 +502,28 @@
  */
 #define CONFIG_VERSION_VARIABLE
 
-/* What U-Boot subsytems do you want enabled? */
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_ELF
+#define CONFIG_CMD_ASKENV
+#define CONFIG_CMD_I2C
+#define CONFIG_CMD_SPI
+#define CONFIG_CMD_SDRAM
+#define CONFIG_CMD_REGINFO
+#define CONFIG_CMD_IMMAP
+#define CONFIG_CMD_IRQ
+#define CONFIG_CMD_PING
+
+#undef CONFIG_CMD_KGDB
+
 #ifdef CONFIG_ETHER_ON_FCC
-# define CONFIG_COMMANDS	(((CONFIG_CMD_DFL & ~(CFG_CMD_KGDB))) | \
-				CFG_CMD_ELF	| \
-				CFG_CMD_ASKENV	| \
-				CFG_CMD_I2C	| \
-				CFG_CMD_SPI	| \
-				CFG_CMD_SDRAM   | \
-				CFG_CMD_REGINFO | \
-				CFG_CMD_IMMAP	| \
-				CFG_CMD_IRQ	| \
-				CFG_CMD_PING	| \
-				CFG_CMD_MII	)
-#else
-# define CONFIG_COMMANDS	(((CONFIG_CMD_DFL & ~(CFG_CMD_KGDB))) | \
-				CFG_CMD_ELF	| \
-				CFG_CMD_ASKENV	| \
-				CFG_CMD_I2C	| \
-				CFG_CMD_SPI	| \
-				CFG_CMD_SDRAM   | \
-				CFG_CMD_REGINFO | \
-				CFG_CMD_IMMAP	| \
-				CFG_CMD_IRQ	| \
-				CFG_CMD_PING	)
-#endif /* CONFIG_ETHER_ON_FCC */
+#define CONFIG_CMD_MII
+#endif
+
 
 /* Where do the internal registers live? */
 #define CFG_IMMR		0xF0000000
@@ -544,10 +541,6 @@
 #define CONFIG_SACSng		1	/* munged for the SACSng */
 #define CONFIG_CPM2		1	/* Has a CPM2 */
 
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
-
-
 /*
  * Miscellaneous configurable options
  */
@@ -589,7 +582,7 @@
 #define CFG_TFTP_TIMEOUT_COUNT 5        /* How many timeouts TFTP will allow */
 					/* before it gives up.               */
 
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
 #  define CFG_CBSIZE		1024	/* Console I/O Buffer Size	     */
 #else
 #  define CFG_CBSIZE		256	/* Console I/O Buffer Size	     */
@@ -732,7 +725,7 @@
  */
 #define CFG_CACHELINE_SIZE	32	/* For MPC8260 CPU */
 
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
 # define CFG_CACHELINE_SHIFT	5	/* log base 2 of the above value */
 #endif
 
diff --git a/include/configs/sc3.h b/include/configs/sc3.h
index e4357b0885..578ef80aa6 100644
--- a/include/configs/sc3.h
+++ b/include/configs/sc3.h
@@ -169,25 +169,27 @@
 #define CONFIG_MII 1			/* add 405GP MII PHY management		*/
 #define CONFIG_PHY_ADDR 1	/* the connected Phy defaults to address 1 */
 
-#define CONFIG_COMMANDS	  \
-	   (CONFIG_CMD_DFL	| \
-			CFG_CMD_AUTOSCRIPT	| \
-			CFG_CMD_PCI		| \
-			CFG_CMD_IRQ		| \
-			CFG_CMD_NET		| \
-			CFG_CMD_MII		| \
-			CFG_CMD_PING		| \
-			CFG_CMD_NAND		| \
-			CFG_CMD_JFFS2		| \
-			CFG_CMD_I2C		| \
-			CFG_CMD_IDE		| \
-			CFG_CMD_DATE		| \
-			CFG_CMD_DHCP		| \
-			CFG_CMD_CACHE		| \
-			CFG_CMD_ELF	)
-
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+
+#define CONFIG_CMD_AUTOSCRIPT
+#define CONFIG_CMD_PCI
+#define CONFIG_CMD_IRQ
+#define CONFIG_CMD_NET
+#define CONFIG_CMD_MII
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_NAND
+#define CONFIG_CMD_JFFS2
+#define CONFIG_CMD_I2C
+#define CONFIG_CMD_IDE
+#define CONFIG_CMD_DATE
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_CACHE
+#define CONFIG_CMD_ELF
+
 
 #undef CONFIG_WATCHDOG			/* watchdog disabled		*/
 
@@ -277,7 +279,7 @@
  * External peripheral base address
  *-----------------------------------------------------------------------
  */
-#if !(CONFIG_COMMANDS & CFG_CMD_IDE)
+#if !defined(CONFIG_CMD_IDE)
 
 #undef	CONFIG_IDE_LED			/* no led for ide supported	*/
 #undef	CONFIG_IDE_RESET		/* no reset for ide supported	*/
@@ -286,7 +288,7 @@
  * IDE/ATA stuff
  *-----------------------------------------------------------------------
  */
-#else /* !(CONFIG_COMMANDS & CFG_CMD_IDE) */
+#else
 #define CONFIG_START_IDE	1	/* check, if use IDE */
 
 #undef	CONFIG_IDE_8xx_DIRECT		/* no pcmcia interface required */
@@ -346,7 +348,7 @@
 
 #endif /* IDE_USES_ISA_EMULATION */
 
-#endif /* !(CONFIG_COMMANDS & CFG_CMD_IDE) */
+#endif
 
 /*
 #define	CFG_KEY_REG_BASE_ADDR	0xF0100000
@@ -437,7 +439,7 @@ extern unsigned long offsetOfEnvironment;
 
 #define CFG_CACHELINE_SIZE 32
 
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
  #define CFG_CACHELINE_SHIFT	5	/* log base 2 of the above value	*/
 #endif
 
diff --git a/include/configs/sc520_cdp.h b/include/configs/sc520_cdp.h
index 8b2ec077bd..1001342a05 100644
--- a/include/configs/sc520_cdp.h
+++ b/include/configs/sc520_cdp.h
@@ -67,16 +67,25 @@
 
 #define CONFIG_BAUDRATE		9600
 
-#define CONFIG_COMMANDS         (CONFIG_CMD_DFL | CFG_CMD_PCI | CFG_CMD_JFFS2 | CFG_CMD_IDE | CFG_CMD_NET | CFG_CMD_EEPROM)
 
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_PCI
+#define CONFIG_CMD_JFFS2
+#define CONFIG_CMD_IDE
+#define CONFIG_CMD_NET
+#define CONFIG_CMD_EEPROM
+
+
 
 #define CONFIG_BOOTDELAY	15
 #define CONFIG_BOOTARGS    	"root=/dev/mtdblock0 console=ttyS0,9600"
 /* #define CONFIG_BOOTCOMMAND	"bootm 38000000" */
 
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE	115200		/* speed to run kgdb serial port */
 #define CONFIG_KGDB_SER_INDEX	2		/* which serial port to use */
 #endif
diff --git a/include/configs/sc520_spunk.h b/include/configs/sc520_spunk.h
index a8e355508b..e761ca7b55 100644
--- a/include/configs/sc520_spunk.h
+++ b/include/configs/sc520_spunk.h
@@ -64,16 +64,25 @@
 
 #define CONFIG_BAUDRATE		9600
 
-#define CONFIG_COMMANDS         (CONFIG_CMD_DFL | CFG_CMD_PCI | CFG_CMD_JFFS2 | CFG_CMD_IDE | CFG_CMD_NET | CFG_CMD_PCMCIA | CFG_CMD_EEPROM)
 
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_PCI
+#define CONFIG_CMD_JFFS2
+#define CONFIG_CMD_IDE
+#define CONFIG_CMD_NET
+#define CONFIG_CMD_PCMCIA
+#define CONFIG_CMD_EEPROM
+
 
 #define CONFIG_BOOTDELAY	15
 #define CONFIG_BOOTARGS    	"root=/dev/mtdblock1 console=ttyS0,9600 mtdparts=phys:7936k(root),256k(uboot) "
 #define CONFIG_BOOTCOMMAND	"setenv bootargs root=/dev/nfs ip=autoconf console=ttyS0,9600 mtdparts=phys:7808k(root),128k(env),256k(uboot); bootp; bootm"
 
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE	115200		/* speed to run kgdb serial port */
 #define CONFIG_KGDB_SER_INDEX	2		/* which serial port to use */
 #endif
diff --git a/include/configs/scb9328.h b/include/configs/scb9328.h
index a4249c47c6..489c35ff4b 100644
--- a/include/configs/scb9328.h
+++ b/include/configs/scb9328.h
@@ -36,20 +36,18 @@
 
 
 /*
- * Definition of u-boot build in commands. Check out CONFIG_CMD_DFL if
- * neccessary in include/cmd_confdefs.h file. (Un)comment for getting
- * functionality or size of u-boot code.
+ * Command line configuration.
  */
-#define CONFIG_COMMANDS		(CONFIG_CMD_DFL		\
-				& ~CFG_CMD_LOADS	\
-				& ~CFG_CMD_CONSOLE	\
-				& ~CFG_CMD_AUTOSCRIPT	\
-				| CFG_CMD_NET		\
-				| CFG_CMD_PING		\
-				| CFG_CMD_DHCP		\
-				)
-
-#include <cmd_confdefs.h>
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_NET
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_DHCP
+
+#undef CONFIG_CMD_LOADS
+#undef CONFIG_CMD_CONSOLE
+#undef CONFIG_CMD_AUTOSCRIPT
+
 
 /*
  * Boot options. Setting delay to -1 stops autostart count down.
diff --git a/include/configs/sequoia.h b/include/configs/sequoia.h
index 44bc955519..14a64e8c3f 100644
--- a/include/configs/sequoia.h
+++ b/include/configs/sequoia.h
@@ -299,9 +299,6 @@
 /* Comment this out to enable USB 1.1 device */
 #define USB_2_0_DEVICE
 
-#define CMD_USB			CFG_CMD_USB
-#else
-#define CMD_USB			0	/* no USB on 440GRx		*/
 #endif /* CONFIG_440EPX */
 
 /* Partitions */
@@ -309,25 +306,34 @@
 #define CONFIG_DOS_PARTITION
 #define CONFIG_ISO_PARTITION
 
-#define CONFIG_COMMANDS       (CONFIG_CMD_DFL	|	\
-			       CFG_CMD_ASKENV	|	\
-			       CFG_CMD_DHCP	|	\
-			       CFG_CMD_DTT	|	\
-			       CFG_CMD_DIAG	|	\
-			       CFG_CMD_EEPROM	|	\
-			       CFG_CMD_ELF	|	\
-			       CFG_CMD_FAT	|	\
-			       CFG_CMD_I2C	|	\
-			       CFG_CMD_IRQ	|	\
-			       CFG_CMD_MII	|	\
-			       CFG_CMD_NAND	|	\
-			       CFG_CMD_NET	|	\
-			       CFG_CMD_NFS	|	\
-			       CFG_CMD_PCI	|	\
-			       CFG_CMD_PING	|	\
-			       CFG_CMD_REGINFO	|	\
-			       CFG_CMD_SDRAM	|	\
-			       CMD_USB)
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_ASKENV
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_DTT
+#define CONFIG_CMD_DIAG
+#define CONFIG_CMD_EEPROM
+#define CONFIG_CMD_ELF
+#define CONFIG_CMD_FAT
+#define CONFIG_CMD_I2C
+#define CONFIG_CMD_IRQ
+#define CONFIG_CMD_MII
+#define CONFIG_CMD_NAND
+#define CONFIG_CMD_NET
+#define CONFIG_CMD_NFS
+#define CONFIG_CMD_PCI
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_REGINFO
+#define CONFIG_CMD_SDRAM
+
+#ifdef CONFIG_440EPX
+#define CONFIG_CMD_USB
+#endif
+
 
 /* POST support */
 #define CONFIG_POST		(CFG_POST_MEMORY   | \
@@ -343,15 +349,12 @@
 
 #define CONFIG_SUPPORT_VFAT
 
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
-
 /*-----------------------------------------------------------------------
  * Miscellaneous configurable options
  *----------------------------------------------------------------------*/
 #define CFG_LONGHELP			/* undef to save memory		*/
 #define CFG_PROMPT	        "=> "	/* Monitor Command Prompt	*/
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
 #define CFG_CBSIZE	        1024	/* Console I/O Buffer Size	*/
 #else
 #define CFG_CBSIZE	        256	/* Console I/O Buffer Size	*/
@@ -441,7 +444,7 @@
  *----------------------------------------------------------------------*/
 #define CFG_DCACHE_SIZE		(32<<10)  /* For AMCC 440 CPUs			*/
 #define CFG_CACHELINE_SIZE	32	      /* ...			            */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
 #define CFG_CACHELINE_SHIFT	5	      /* log base 2 of the above value	*/
 #endif
 
@@ -453,7 +456,7 @@
 #define BOOTFLAG_COLD	0x01		/* Normal Power-On: Boot from FLASH	*/
 #define BOOTFLAG_WARM	0x02		/* Software reboot			*/
 
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE	230400	/* speed to run kgdb serial port */
 #define CONFIG_KGDB_SER_INDEX	2	    /* which serial port to use */
 #endif
diff --git a/include/configs/shannon.h b/include/configs/shannon.h
index 572985b051..cad38d0c00 100644
--- a/include/configs/shannon.h
+++ b/include/configs/shannon.h
@@ -66,21 +66,19 @@
 
 #define CONFIG_BAUDRATE		115200
 
-#if 0 /* XXX - cannot test IDE anyway, so disabled for now - wd */
-#define CONFIG_COMMANDS		(CONFIG_CMD_DFL	| \
-				 CFG_CMD_PCMCIA	| \
-				 CFG_CMD_IDE)
-#endif /* 0 */
 
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
 
 #define CONFIG_BOOTDELAY	3
 #define CONFIG_BOOTARGS    	"root=ramfs devfs=mount console=ttySA0,115200"
 #define CONFIG_NETMASK          255.255.0.0
 #define CONFIG_BOOTCOMMAND	"help"
 
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE	230400		/* speed to run kgdb serial port */
 #define CONFIG_KGDB_SER_INDEX	2		/* which serial port to use */
 #endif
diff --git a/include/configs/smdk2400.h b/include/configs/smdk2400.h
index a137f9d7c9..22e69725b3 100644
--- a/include/configs/smdk2400.h
+++ b/include/configs/smdk2400.h
@@ -86,24 +86,23 @@
 /* Use s3c2400's RTC */
 #define CONFIG_RTC_S3C24X0	1
 
-#ifndef USE_920T_MMU
-#define CONFIG_COMMANDS_tmp    ((CONFIG_CMD_DFL & ~CFG_CMD_CACHE) | \
-				CFG_CMD_DATE	| \
-				CFG_CMD_SNTP	)
-#else
-#define CONFIG_COMMANDS_tmp    (CONFIG_CMD_DFL	| \
-				CFG_CMD_DATE	| \
-				CFG_CMD_SNTP	)
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_DATE
+#define CONFIG_CMD_SNTP
+
+#if defined(CONFIG_HWFLOW)
+    #define CONFIG_CONFIG_HWFLOW
 #endif
 
-#ifdef CONFIG_HWFLOW
-#define CONFIG_COMMANDS		(CONFIG_COMMANDS_tmp | CFG_CMD_HWFLOW)
-#else
-#define CONFIG_COMMANDS		CONFIG_COMMANDS_tmp
+#if !defined(USE_920T_MMU)
+    #undef CONFIG_CMD_CACHE
 #endif
 
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
 
 #define CONFIG_BOOTDELAY	3
 #if 0
@@ -118,7 +117,7 @@
 #define CONFIG_BOOTCOMMAND	"tftp; bootm"
 #endif
 
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE	115200		/* speed to run kgdb serial port */
 /* what's this ? it's not used anywhere */
 #define CONFIG_KGDB_SER_INDEX	1		/* which serial port to use */
diff --git a/include/configs/smdk2410.h b/include/configs/smdk2410.h
index 7edec0db43..cd3d327654 100644
--- a/include/configs/smdk2410.h
+++ b/include/configs/smdk2410.h
@@ -72,22 +72,17 @@
 
 #define CONFIG_BAUDRATE		115200
 
-/***********************************************************
- * Command definition
- ***********************************************************/
-#define CONFIG_COMMANDS \
-			(CONFIG_CMD_DFL	 | \
-			CFG_CMD_CACHE	 | \
-			/*CFG_CMD_NAND	 |*/ \
-			/*CFG_CMD_EEPROM |*/ \
-			/*CFG_CMD_I2C	 |*/ \
-			/*CFG_CMD_USB	 |*/ \
-			CFG_CMD_REGINFO  | \
-			CFG_CMD_DATE	 | \
-			CFG_CMD_ELF)
-
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_CACHE
+#define CONFIG_CMD_REGINFO
+#define CONFIG_CMD_DATE
+#define CONFIG_CMD_ELF
+
 
 #define CONFIG_BOOTDELAY	3
 /*#define CONFIG_BOOTARGS    	"root=ramfs devfs=mount console=ttySA0,9600" */
@@ -98,7 +93,7 @@
 /*#define CONFIG_BOOTFILE	"elinos-lart" */
 /*#define CONFIG_BOOTCOMMAND	"tftp; bootm" */
 
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE	115200		/* speed to run kgdb serial port */
 /* what's this ? it's not used anywhere */
 #define CONFIG_KGDB_SER_INDEX	1		/* which serial port to use */
diff --git a/include/configs/smmaco4.h b/include/configs/smmaco4.h
index 185c2d4870..8d098579d7 100644
--- a/include/configs/smmaco4.h
+++ b/include/configs/smmaco4.h
@@ -42,11 +42,6 @@
 #define BOOTFLAG_COLD		0x01	/* Normal Power-On: Boot from FLASH  */
 #define BOOTFLAG_WARM		0x02	/* Software reboot	     */
 
-#define CFG_CACHELINE_SIZE	32	/* For MPC5xxx CPUs */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
-#  define CFG_CACHELINE_SHIFT	5	/* log base 2 of the above value */
-#endif
-
 /*
  * Serial console configuration
  */
@@ -72,26 +67,25 @@
 #define CFG_CMD_POST_DIAG 0
 #endif
 
+
 /*
- * Supported commands
+ * Command line configuration.
  */
-#define CONFIG_COMMANDS	       (CONFIG_CMD_DFL	| \
-				CFG_CMD_ASKENV	| \
-				CFG_CMD_DATE	| \
-				CFG_CMD_DHCP	| \
-				CFG_CMD_ECHO	| \
-				CFG_CMD_EEPROM	| \
-				CFG_CMD_I2C	| \
-				CFG_CMD_JFFS2	| \
-				CFG_CMD_MII	| \
-				CFG_CMD_NFS	| \
-				CFG_CMD_PING	| \
-				CFG_CMD_POST_DIAG | \
-				CFG_CMD_REGINFO | \
-				CFG_CMD_SNTP	)
-
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
+#include <config_cmd_default.h>
+#define CONFIG_CMD_ASKENV
+#define CONFIG_CMD_DATE
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_ECHO
+#define CONFIG_CMD_EEPROM
+#define CONFIG_CMD_I2C
+#define CONFIG_CMD_JFFS2
+#define CONFIG_CMD_MII
+#define CONFIG_CMD_NFS
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_POST
+#define CONFIG_CMD_REGINFO
+#define CONFIG_CMD_SNTP
+
 
 #define	CONFIG_TIMESTAMP		/* display image timestamps */
 
@@ -319,7 +313,7 @@
  */
 #define CFG_LONGHELP			/* undef to save memory	    */
 #define CFG_PROMPT		"=> "	/* Monitor Command Prompt   */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
 #define CFG_CBSIZE		1024	/* Console I/O Buffer Size  */
 #else
 #define CFG_CBSIZE		256	/* Console I/O Buffer Size  */
@@ -338,6 +332,11 @@
 
 #define CFG_HZ			1000	/* decrementer freq: 1 ms ticks */
 
+#define CFG_CACHELINE_SIZE	32	/* For MPC5xxx CPUs */
+#if defined(CONFIG_CMD_KGDB)
+#  define CFG_CACHELINE_SHIFT	5	/* log base 2 of the above value */
+#endif
+
 /*
  * Enable loopw commando. This has only affect, if CFG_CMD_MEM is defined,
  * which is normally part of the default commands (CFV_CMD_DFL)
diff --git a/include/configs/sorcery.h b/include/configs/sorcery.h
index 4937638820..e8f4cfac3f 100644
--- a/include/configs/sorcery.h
+++ b/include/configs/sorcery.h
@@ -39,12 +39,6 @@
 #define BOOTFLAG_COLD		0x01	/* Normal Power-On: Boot from FLASH */
 #define BOOTFLAG_WARM		0x02	/* Software reboot	*/
 
-#define CFG_CACHELINE_SIZE	32	/* For MPC8220 CPUs */
-
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
-#  define CFG_CACHELINE_SHIFT	5   	/* log base 2 of the above value */
-#endif
-
 /*
  * Serial console configuration
  */
@@ -69,30 +63,26 @@
 #define CONFIG_PCI_CFG_PHYS	CONFIG_PCI_CFG_BUS
 #define CONFIG_PCI_CFG_SIZE	0x01000000
 
+
 /*
- * Supported commands
+ * Command line configuration.
  */
-#define CONFIG_COMMANDS	      ( CONFIG_CMD_DFL	| \
-				CFG_CMD_BOOTD	| \
-				CFG_CMD_CACHE	| \
-				CFG_CMD_DHCP	| \
-				CFG_CMD_DIAG	| \
-				CFG_CMD_ELF	| \
-				CFG_CMD_I2C	| \
-				CFG_CMD_NET	| \
-				CFG_CMD_NFS	| \
-				CFG_CMD_PCI	| \
-				CFG_CMD_PING	| \
-				CFG_CMD_REGINFO	| \
-				CFG_CMD_SDRAM	| \
-				CFG_CMD_SNTP	| \
-				0)
-
-/*			CFG_CMD_MII	| \ */
-/*			       CFG_CMD_USB	| \ */
-
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_BOOTD
+#define CONFIG_CMD_CACHE
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_DIAG
+#define CONFIG_CMD_ELF
+#define CONFIG_CMD_I2C
+#define CONFIG_CMD_NET
+#define CONFIG_CMD_NFS
+#define CONFIG_CMD_PCI
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_REGINFO
+#define CONFIG_CMD_SDRAM
+#define CONFIG_CMD_SNTP
+
 
 /*
  * Default Environment
@@ -268,7 +258,7 @@
  */
 #define CFG_LONGHELP			    /* undef to save memory	*/
 #define CFG_PROMPT		"=> "	    /* Monitor Command Prompt	*/
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
 #define CFG_CBSIZE		1024	    /* Console I/O Buffer Size	*/
 #else
 #define CFG_CBSIZE		256	    /* Console I/O Buffer Size	*/
@@ -284,6 +274,11 @@
 
 #define CFG_HZ			1000	    /* decrementer freq: 1 ms ticks */
 
+#define CFG_CACHELINE_SIZE	32	/* For MPC8220 CPUs */
+#if defined(CONFIG_CMD_KGDB)
+#  define CFG_CACHELINE_SHIFT	5   	/* log base 2 of the above value */
+#endif
+
 /*
  * Various low-level settings
  */
diff --git a/include/configs/spc1920.h b/include/configs/spc1920.h
index 09bbebdce8..ea6a11237d 100644
--- a/include/configs/spc1920.h
+++ b/include/configs/spc1920.h
@@ -80,24 +80,24 @@
 #undef	CONFIG_WATCHDOG			/* watchdog disabled		*/
 #define CONFIG_BZIP2	 /* include support for bzip2 compressed images */
 
-#ifndef CONFIG_COMMANDS
-#define CONFIG_COMMANDS	(CONFIG_CMD_DFL   \
-			 | CFG_CMD_ASKENV \
-			 | CFG_CMD_DATE \
-			 | CFG_CMD_ECHO   \
-			 | CFG_CMD_IMMAP  \
-			 | CFG_CMD_JFFS2 \
-			 | CFG_CMD_PING \
-			 | CFG_CMD_DHCP \
-			 | CFG_CMD_I2C \
-			 | CFG_CMD_MII)
-			/* & ~( CFG_CMD_NET)) */
 
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_ASKENV
+#define CONFIG_CMD_DATE
+#define CONFIG_CMD_ECHO
+#define CONFIG_CMD_IMMAP
+#define CONFIG_CMD_JFFS2
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_I2C
+#define CONFIG_CMD_MII
 
-#endif /* !CONFIG_COMMANDS */
+#undef CONFIG_CMD_NET
 
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
 
 /*
  * Miscellaneous configurable options
@@ -107,7 +107,7 @@
 #define CFG_HUSH_PARSER
 #define CFG_PROMPT_HUSH_PS2	"> "
 
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
 #define	CFG_CBSIZE		1024		/* Console I/O Buffer Size	*/
 #else
 #define	CFG_CBSIZE		256		/* Console I/O Buffer Size	*/
@@ -202,7 +202,7 @@
 /*-----------------------------------------------------------------------
  * I2C configuration
  */
-#if (CONFIG_COMMANDS & CFG_CMD_I2C)
+#if defined(CONFIG_CMD_I2C)
 /* enable I2C and select the hardware/software driver */
 #undef CONFIG_HARD_I2C                 /* I2C with hardware support    */
 #define CONFIG_SOFT_I2C                1       /* I2C bit-banged               */
diff --git a/include/configs/spieval.h b/include/configs/spieval.h
index 9888d11108..e480df5f9c 100644
--- a/include/configs/spieval.h
+++ b/include/configs/spieval.h
@@ -44,11 +44,6 @@
 #define BOOTFLAG_COLD		0x01	/* Normal Power-On: Boot from FLASH  */
 #define BOOTFLAG_WARM		0x02	/* Software reboot	     */
 
-#define CFG_CACHELINE_SIZE	32	/* For MPC5xxx CPUs */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
-#  define CFG_CACHELINE_SHIFT	5	/* log base 2 of the above value */
-#endif
-
 /*
  * Serial console configuration
  */
@@ -88,12 +83,6 @@
 #define CONFIG_NS8382X		1
 #endif	/* CONFIG_STK52XX */
 
-#ifdef CONFIG_PCI
-#define ADD_PCI_CMD		CFG_CMD_PCI
-#else
-#define ADD_PCI_CMD		0
-#endif
-
 /*
  * Video console
  */
@@ -110,12 +99,6 @@
 #define CFG_CONSOLE_IS_IN_ENV
 #endif
 
-#ifdef CONFIG_VIDEO
-#define ADD_BMP_CMD		CFG_CMD_BMP
-#else
-#define ADD_BMP_CMD		0
-#endif
-
 /* Partitions */
 #define CONFIG_MAC_PARTITION
 #define CONFIG_DOS_PARTITION
@@ -124,10 +107,7 @@
 /* USB */
 #ifdef CONFIG_STK52XX
 #define CONFIG_USB_OHCI
-#define ADD_USB_CMD		CFG_CMD_USB | CFG_CMD_FAT
 #define CONFIG_USB_STORAGE
-#else
-#define ADD_USB_CMD		0
 #endif
 
 /* POST support */
@@ -143,36 +123,44 @@
 #define CFG_CMD_POST_DIAG 0
 #endif
 
-/* IDE */
-#if defined (CONFIG_MINIFAP) || defined (CONFIG_STK52XX)
-#define ADD_IDE_CMD		(CFG_CMD_IDE | CFG_CMD_FAT | CFG_CMD_EXT2)
-#else
-#define ADD_IDE_CMD		0
-#endif
 
 /*
- * Supported commands
+ * Command line configuration.
  */
-#define CONFIG_COMMANDS	       (CONFIG_CMD_DFL	| \
-				ADD_BMP_CMD	| \
-				ADD_IDE_CMD	| \
-				ADD_PCI_CMD	| \
-				ADD_USB_CMD	| \
-				CFG_CMD_ASKENV	| \
-				CFG_CMD_DATE	| \
-				CFG_CMD_DHCP	| \
-				CFG_CMD_ECHO	| \
-				CFG_CMD_EEPROM	| \
-				CFG_CMD_I2C	| \
-				CFG_CMD_MII	| \
-				CFG_CMD_NFS	| \
-				CFG_CMD_PING	| \
-				CFG_CMD_POST_DIAG | \
-				CFG_CMD_REGINFO | \
-				CFG_CMD_SNTP	)
-
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
+#include <config_cmd_default.h>
+
+#if defined(CONFIG_MINIFAP) || defined(CONFIG_STK52XX)
+    #define CONFIG_CMD_IDE
+    #define CONFIG_CMD_FAT
+    #define CONFIG_CMD_EXT2
+#endif
+
+#ifdef CONFIG_STK52XX
+    #define CONFIG_CMD_USB
+    #define CONFIG_CMD_FAT
+#endif
+
+#ifdef CONFIG_VIDEO
+    #define CONFIG_CMD_BMP
+#endif
+
+#ifdef CONFIG_PCI
+    #define CONFIG_CMD_PCI
+#endif
+
+#define CONFIG_CMD_ASKENV
+#define CONFIG_CMD_DATE
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_ECHO
+#define CONFIG_CMD_EEPROM
+#define CONFIG_CMD_I2C
+#define CONFIG_CMD_MII
+#define CONFIG_CMD_NFS
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_POST
+#define CONFIG_CMD_REGINFO
+#define CONFIG_CMD_SNTP
+
 
 #define	CONFIG_TIMESTAMP		/* display image timestamps */
 
@@ -406,7 +394,7 @@
  */
 #define CFG_LONGHELP			/* undef to save memory	    */
 #define CFG_PROMPT		"=> "	/* Monitor Command Prompt   */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
 #define CFG_CBSIZE		1024	/* Console I/O Buffer Size  */
 #else
 #define CFG_CBSIZE		256	/* Console I/O Buffer Size  */
@@ -425,6 +413,11 @@
 
 #define CFG_HZ			1000	/* decrementer freq: 1 ms ticks */
 
+#define CFG_CACHELINE_SIZE	32	/* For MPC5xxx CPUs */
+#if defined(CONFIG_CMD_KGDB)
+#  define CFG_CACHELINE_SHIFT	5	/* log base 2 of the above value */
+#endif
+
 /*
  * Enable loopw commando. This has only affect, if CFG_CMD_MEM is defined,
  * which is normally part of the default commands (CFV_CMD_DFL)
diff --git a/include/configs/suzaku.h b/include/configs/suzaku.h
index 8224555896..cb1a2e6a1a 100644
--- a/include/configs/suzaku.h
+++ b/include/configs/suzaku.h
@@ -55,10 +55,12 @@
 #define MICROBLAZE_SYSREG_BASE_ADDR 0xFFFFA000
 #define MICROBLAZE_SYSREG_RECONFIGURE (1 << 0)
 
-#define CONFIG_COMMANDS		(CONFIG__CMD_DFL)
 
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
 
 #define CFG_UART1_BASE		(0xFFFF2000)
 #define CONFIG_SERIAL_BASE	CFG_UART1_BASE
diff --git a/include/configs/svm_sc8xx.h b/include/configs/svm_sc8xx.h
index 92ee8cb333..0cd0219b80 100644
--- a/include/configs/svm_sc8xx.h
+++ b/include/configs/svm_sc8xx.h
@@ -132,15 +132,18 @@
 
 #define	CONFIG_RTC_MPC8xx		/* use internal RTC of MPC8xx	*/
 
-#define CONFIG_COMMANDS	      ( CONFIG_CMD_DFL	| \
-				CFG_CMD_ASKENV  | \
-				CFG_CMD_DHCP	| \
-				CFG_CMD_DOC	| \
-/*				CFG_CMD_IDE     |*/ \
-				CFG_CMD_DATE	)
-
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_ASKENV
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_DOC
+#define CONFIG_CMD_DATE
+
+
 #define CFG_NAND_LEGACY
 
 /*
@@ -153,7 +156,7 @@
 #define CFG_PROMPT_HUSH_PS2     "> "
 #endif
 
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
 #define	CFG_CBSIZE	1024		/* Console I/O Buffer Size	*/
 #else
 #define	CFG_CBSIZE	256		/* Console I/O Buffer Size	*/
@@ -246,7 +249,7 @@
  * Cache Configuration
  */
 #define CFG_CACHELINE_SIZE	16	/* For all MPC8xx CPUs			*/
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
 #define CFG_CACHELINE_SHIFT	4	/* log base 2 of the above value	*/
 #endif