rpi: add support for Raspberry Pi 2 model B

USB doesn't seem to work yet; the controller detects the on-board Hub/
Ethernet device but can't read the descriptors from it. I haven't
investigated yet.

Signed-off-by: Stephen Warren <swarren@wwwdotorg.org>

11 files changed, 271 insertions, 169 deletions

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 083823e8c4..820ba1ccab 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -310,6 +310,10 @@ config TARGET_RPI
 	bool "Support rpi"
 	select CPU_ARM1176
 
+config TARGET_RPI_2
+	bool "Support rpi_2"
+	select CPU_V7
+
 config TARGET_TNETV107X_EVM
 	bool "Support tnetv107x_evm"
 	select CPU_ARM1176
@@ -830,6 +834,7 @@ source "board/phytec/pcm051/Kconfig"
 source "board/ppcag/bg0900/Kconfig"
 source "board/pxa255_idp/Kconfig"
 source "board/raspberrypi/rpi/Kconfig"
+source "board/raspberrypi/rpi_2/Kconfig"
 source "board/samsung/smdk2410/Kconfig"
 source "board/sandisk/sansa_fuze_plus/Kconfig"
 source "board/scb9328/Kconfig"
diff --git a/arch/arm/cpu/arm1176/bcm2835/Kconfig b/arch/arm/cpu/arm1176/bcm2835/Kconfig
index 94f57d732f..162f973f6c 100644
--- a/arch/arm/cpu/arm1176/bcm2835/Kconfig
+++ b/arch/arm/cpu/arm1176/bcm2835/Kconfig
@@ -1,4 +1,4 @@
-if TARGET_RPI
+if TARGET_RPI || TARGET_RPI_2
 
 config DM
 	default y if !SPL_BUILD
diff --git a/arch/arm/include/asm/arch-bcm2835/mbox.h b/arch/arm/include/asm/arch-bcm2835/mbox.h
index c4bbacaf3c..04bf480a54 100644
--- a/arch/arm/include/asm/arch-bcm2835/mbox.h
+++ b/arch/arm/include/asm/arch-bcm2835/mbox.h
@@ -125,6 +125,9 @@ struct bcm2835_mbox_tag_hdr {
 
 #define BCM2835_MBOX_TAG_GET_BOARD_REV	0x00010002
 
+#ifdef CONFIG_BCM2836
+#define BCM2836_BOARD_REV_2_B		0x4
+#else
 /*
  * 0x2..0xf from:
  * http://raspberryalphaomega.org.uk/2013/02/06/automatic-raspberry-pi-board-revision-detection-model-a-b1-and-b2/
@@ -145,6 +148,7 @@ struct bcm2835_mbox_tag_hdr {
 #define BCM2835_BOARD_REV_B_PLUS	0x10
 #define BCM2835_BOARD_REV_CM		0x11
 #define BCM2835_BOARD_REV_A_PLUS	0x12
+#endif
 
 struct bcm2835_mbox_tag_get_board_rev {
 	struct bcm2835_mbox_tag_hdr tag_hdr;
diff --git a/board/raspberrypi/rpi/rpi.c b/board/raspberrypi/rpi/rpi.c
index fdbf87d6fa..50a699bb9e 100644
--- a/board/raspberrypi/rpi/rpi.c
+++ b/board/raspberrypi/rpi/rpi.c
@@ -1,5 +1,5 @@
 /*
- * (C) Copyright 2012-2013 Stephen Warren
+ * (C) Copyright 2012-2013,2015 Stephen Warren
  *
  * SPDX-License-Identifier:	GPL-2.0
  */
@@ -29,7 +29,11 @@ U_BOOT_DEVICE(bcm2835_gpios) = {
 };
 
 static const struct pl01x_serial_platdata serial_platdata = {
+#ifdef CONFIG_BCM2836
+	.base = 0x3f201000,
+#else
 	.base = 0x20201000,
+#endif
 	.type = TYPE_PL011,
 	.clock = 3000000,
 };
@@ -77,9 +81,20 @@ static const struct {
 } models[] = {
 	[0] = {
 		"Unknown model",
+#ifdef CONFIG_BCM2836
+		"bcm2836-rpi-other.dtb",
+#else
 		"bcm2835-rpi-other.dtb",
+#endif
 		false,
 	},
+#ifdef CONFIG_BCM2836
+	[BCM2836_BOARD_REV_2_B] = {
+		"2 Model B",
+		"bcm2836-rpi-2-b.dtb",
+		true,
+	},
+#else
 	[BCM2835_BOARD_REV_B_I2C0_2] = {
 		"Model B (no P5)",
 		"bcm2835-rpi-b-i2c0.dtb",
@@ -150,6 +165,7 @@ static const struct {
 		"bcm2835-rpi-a-plus.dtb",
 		false,
 	},
+#endif
 };
 
 u32 rpi_board_rev = 0;
@@ -257,7 +273,15 @@ static void get_board_rev(void)
 		return;
 	}
 
+	/*
+	 * For details of old-vs-new scheme, see:
+	 * https://github.com/pimoroni/RPi.version/blob/master/RPi/version.py
+	 * http://www.raspberrypi.org/forums/viewtopic.php?f=63&t=99293&p=690282
+	 * (a few posts down)
+	 */
 	rpi_board_rev = msg->get_board_rev.body.resp.rev;
+	if (rpi_board_rev & 0x800000)
+		rpi_board_rev = (rpi_board_rev >> 4) & 0xff;
 	if (rpi_board_rev >= ARRAY_SIZE(models)) {
 		printf("RPI: Board rev %u outside known range\n",
 		       rpi_board_rev);
@@ -269,7 +293,7 @@ static void get_board_rev(void)
 	}
 
 	name = models[rpi_board_rev].name;
-	printf("RPI model: %s\n", name);
+	printf("RPI %s\n", name);
 }
 
 int board_init(void)
diff --git a/board/raspberrypi/rpi_2/Kconfig b/board/raspberrypi/rpi_2/Kconfig
new file mode 100644
index 0000000000..032184d5ad
--- /dev/null
+++ b/board/raspberrypi/rpi_2/Kconfig
@@ -0,0 +1,15 @@
+if TARGET_RPI_2
+
+config SYS_BOARD
+	default "rpi_2"
+
+config SYS_VENDOR
+	default "raspberrypi"
+
+config SYS_SOC
+	default "bcm2835"
+
+config SYS_CONFIG_NAME
+	default "rpi_2"
+
+endif
diff --git a/board/raspberrypi/rpi_2/MAINTAINERS b/board/raspberrypi/rpi_2/MAINTAINERS
new file mode 100644
index 0000000000..85a480c9d1
--- /dev/null
+++ b/board/raspberrypi/rpi_2/MAINTAINERS
@@ -0,0 +1,6 @@
+RPI_2 BOARD
+M:	Stephen Warren <swarren@wwwdotorg.org>
+S:	Maintained
+F:	board/raspberrypi/rpi_2/
+F:	include/configs/rpi_2.h
+F:	configs/rpi_2_defconfig
diff --git a/board/raspberrypi/rpi_2/Makefile b/board/raspberrypi/rpi_2/Makefile
new file mode 100644
index 0000000000..d82cd21f4c
--- /dev/null
+++ b/board/raspberrypi/rpi_2/Makefile
@@ -0,0 +1,7 @@
+#
+# (C) Copyright 2012,2015 Stephen Warren
+#
+# SPDX-License-Identifier:	GPL-2.0
+#
+
+obj-y	:= ../rpi/rpi.o
diff --git a/configs/rpi_2_defconfig b/configs/rpi_2_defconfig
new file mode 100644
index 0000000000..b539d4a689
--- /dev/null
+++ b/configs/rpi_2_defconfig
@@ -0,0 +1,4 @@
+CONFIG_ARM=y
+CONFIG_TARGET_RPI_2=y
+CONFIG_SYS_MALLOC_F=y
+CONFIG_SYS_MALLOC_F_LEN=0x400
diff --git a/include/configs/rpi-common.h b/include/configs/rpi-common.h
new file mode 100644
index 0000000000..3121ac9874
--- /dev/null
+++ b/include/configs/rpi-common.h
@@ -0,0 +1,186 @@
+/*
+ * (C) Copyright 2012,2015 Stephen Warren
+ *
+ * SPDX-License-Identifier:	GPL-2.0
+ */
+
+#ifndef _RPI_COMMON_H_
+#define _RPI_COMMON_H_
+
+#include <linux/sizes.h>
+
+/* Architecture, CPU, etc.*/
+#define CONFIG_SYS_GENERIC_BOARD
+#define CONFIG_BCM2835
+#define CONFIG_ARCH_CPU_INIT
+#define CONFIG_SYS_DCACHE_OFF
+/*
+ * 2835 is a SKU in a series for which the 2708 is the first or primary SoC,
+ * so 2708 has historically been used rather than a dedicated 2835 ID.
+ *
+ * We don't define a machine type for bcm2709/bcm2836 since the RPi Foundation
+ * chose to use someone else's previously registered machine ID (3139, MX51_GGC)
+ * rather than obtaining a valid ID:-/
+ */
+#ifndef CONFIG_BCM2836
+#define CONFIG_MACH_TYPE		MACH_TYPE_BCM2708
+#endif
+
+/* Memory layout */
+#define CONFIG_NR_DRAM_BANKS		1
+#define CONFIG_SYS_SDRAM_BASE		0x00000000
+#define CONFIG_SYS_TEXT_BASE		0x00008000
+#define CONFIG_SYS_UBOOT_BASE		CONFIG_SYS_TEXT_BASE
+/*
+ * The board really has 256M. However, the VC (VideoCore co-processor) shares
+ * the RAM, and uses a configurable portion at the top. We tell U-Boot that a
+ * smaller amount of RAM is present in order to avoid stomping on the area
+ * the VC uses.
+ */
+#define CONFIG_SYS_SDRAM_SIZE		SZ_128M
+#define CONFIG_SYS_INIT_SP_ADDR		(CONFIG_SYS_SDRAM_BASE + \
+					 CONFIG_SYS_SDRAM_SIZE - \
+					 GENERATED_GBL_DATA_SIZE)
+#define CONFIG_SYS_MALLOC_LEN		SZ_4M
+#define CONFIG_SYS_MEMTEST_START	0x00100000
+#define CONFIG_SYS_MEMTEST_END		0x00200000
+#define CONFIG_LOADADDR			0x00200000
+
+/* Flash */
+#define CONFIG_SYS_NO_FLASH
+
+/* Devices */
+/* GPIO */
+#define CONFIG_BCM2835_GPIO
+/* LCD */
+#define CONFIG_LCD
+#define CONFIG_LCD_DT_SIMPLEFB
+#define LCD_BPP				LCD_COLOR16
+/*
+ * Prevent allocation of RAM for FB; the real FB address is queried
+ * dynamically from the VideoCore co-processor, and comes from RAM
+ * not owned by the ARM CPU.
+ */
+#define CONFIG_FB_ADDR			0
+#define CONFIG_VIDEO_BCM2835
+#define CONFIG_SYS_WHITE_ON_BLACK
+
+/* SD/MMC configuration */
+#define CONFIG_GENERIC_MMC
+#define CONFIG_MMC
+#define CONFIG_SDHCI
+#define CONFIG_MMC_SDHCI_IO_ACCESSORS
+#define CONFIG_BCM2835_SDHCI
+
+#define CONFIG_CMD_USB
+#ifdef CONFIG_CMD_USB
+#define CONFIG_USB_DWC2
+#ifdef CONFIG_BCM2836
+#define CONFIG_USB_DWC2_REG_ADDR 0x3f980000
+#else
+#define CONFIG_USB_DWC2_REG_ADDR 0x20980000
+#endif
+#define CONFIG_USB_STORAGE
+#define CONFIG_USB_HOST_ETHER
+#define CONFIG_USB_ETHER_SMSC95XX
+#define CONFIG_MISC_INIT_R
+#endif
+
+/* Console UART */
+#define CONFIG_PL01X_SERIAL
+#define CONFIG_CONS_INDEX		0
+#define CONFIG_BAUDRATE			115200
+
+/* Console configuration */
+#define CONFIG_SYS_CBSIZE		1024
+#define CONFIG_SYS_PBSIZE		(CONFIG_SYS_CBSIZE +		\
+					 sizeof(CONFIG_SYS_PROMPT) + 16)
+
+/* Environment */
+#define CONFIG_ENV_SIZE			SZ_16K
+#define CONFIG_ENV_IS_IN_FAT
+#define FAT_ENV_INTERFACE		"mmc"
+#define FAT_ENV_DEVICE_AND_PART		"0:1"
+#define FAT_ENV_FILE			"uboot.env"
+#define CONFIG_FAT_WRITE
+#define CONFIG_ENV_VARS_UBOOT_CONFIG
+#define CONFIG_SYS_LOAD_ADDR		0x1000000
+#define CONFIG_CONSOLE_MUX
+#define CONFIG_SYS_CONSOLE_IS_IN_ENV
+
+/* Shell */
+#define CONFIG_SYS_MAXARGS		8
+#define CONFIG_SYS_PROMPT		"U-Boot> "
+#define CONFIG_COMMAND_HISTORY
+
+/* Commands */
+#include <config_cmd_default.h>
+#define CONFIG_CMD_GPIO
+#define CONFIG_CMD_MMC
+#define CONFIG_PARTITION_UUIDS
+#define CONFIG_CMD_PART
+
+/* Device tree support */
+#define CONFIG_OF_BOARD_SETUP
+/* ATAGs support for bootm/bootz */
+#define CONFIG_SETUP_MEMORY_TAGS
+#define CONFIG_CMDLINE_TAG
+#define CONFIG_INITRD_TAG
+
+#include <config_distro_defaults.h>
+
+/* Some things don't make sense on this HW or yet */
+#undef CONFIG_CMD_FPGA
+
+/* Environment */
+#define ENV_DEVICE_SETTINGS \
+	"stdin=serial,lcd\0" \
+	"stdout=serial,lcd\0" \
+	"stderr=serial,lcd\0"
+
+/*
+ * Memory layout for where various images get loaded by boot scripts:
+ *
+ * scriptaddr can be pretty much anywhere that doesn't conflict with something
+ *   else. Put it low in memory to avoid conflicts.
+ *
+ * pxefile_addr_r can be pretty much anywhere that doesn't conflict with
+ *   something else. Put it low in memory to avoid conflicts.
+ *
+ * kernel_addr_r must be within the first 128M of RAM in order for the
+ *   kernel's CONFIG_AUTO_ZRELADDR option to work. Since the kernel will
+ *   decompress itself to 0x8000 after the start of RAM, kernel_addr_r
+ *   should not overlap that area, or the kernel will have to copy itself
+ *   somewhere else before decompression. Similarly, the address of any other
+ *   data passed to the kernel shouldn't overlap the start of RAM. Pushing
+ *   this up to 16M allows for a sizable kernel to be decompressed below the
+ *   compressed load address.
+ *
+ * fdt_addr_r simply shouldn't overlap anything else. Choosing 32M allows for
+ *   the compressed kernel to be up to 16M too.
+ *
+ * ramdisk_addr_r simply shouldn't overlap anything else. Choosing 33M allows
+ *   for the FDT/DTB to be up to 1M, which is hopefully plenty.
+ */
+#define ENV_MEM_LAYOUT_SETTINGS \
+	"scriptaddr=0x00000000\0" \
+	"pxefile_addr_r=0x00100000\0" \
+	"kernel_addr_r=0x01000000\0" \
+	"fdt_addr_r=0x02000000\0" \
+	"ramdisk_addr_r=0x02100000\0" \
+
+#define BOOT_TARGET_DEVICES(func) \
+	func(MMC, mmc, 0) \
+	func(USB, usb, 0) \
+	func(PXE, pxe, na) \
+	func(DHCP, dhcp, na)
+#include <config_distro_bootcmd.h>
+
+#define CONFIG_EXTRA_ENV_SETTINGS \
+	ENV_DEVICE_SETTINGS \
+	ENV_MEM_LAYOUT_SETTINGS \
+	BOOTENV
+
+#define CONFIG_BOOTDELAY 2
+
+#endif
diff --git a/include/configs/rpi.h b/include/configs/rpi.h
index 9b32149b0e..ab2f4db39f 100644
--- a/include/configs/rpi.h
+++ b/include/configs/rpi.h
@@ -1,5 +1,5 @@
 /*
- * (C) Copyright 2012 Stephen Warren
+ * (C) Copyright 2012,2015 Stephen Warren
  *
  * SPDX-License-Identifier:	GPL-2.0
  */
@@ -7,170 +7,6 @@
 #ifndef __CONFIG_H
 #define __CONFIG_H
 
-#include <linux/sizes.h>
-
-/* Architecture, CPU, etc.*/
-#define CONFIG_SYS_GENERIC_BOARD
-#define CONFIG_BCM2835
-#define CONFIG_ARCH_CPU_INIT
-#define CONFIG_SYS_DCACHE_OFF
-/*
- * 2835 is a SKU in a series for which the 2708 is the first or primary SoC,
- * so 2708 has historically been used rather than a dedicated 2835 ID.
- */
-#define CONFIG_MACH_TYPE		MACH_TYPE_BCM2708
-
-/* Memory layout */
-#define CONFIG_NR_DRAM_BANKS		1
-#define CONFIG_SYS_SDRAM_BASE		0x00000000
-#define CONFIG_SYS_TEXT_BASE		0x00008000
-#define CONFIG_SYS_UBOOT_BASE		CONFIG_SYS_TEXT_BASE
-/*
- * The board really has 256M. However, the VC (VideoCore co-processor) shares
- * the RAM, and uses a configurable portion at the top. We tell U-Boot that a
- * smaller amount of RAM is present in order to avoid stomping on the area
- * the VC uses.
- */
-#define CONFIG_SYS_SDRAM_SIZE		SZ_128M
-#define CONFIG_SYS_INIT_SP_ADDR		(CONFIG_SYS_SDRAM_BASE + \
-					 CONFIG_SYS_SDRAM_SIZE - \
-					 GENERATED_GBL_DATA_SIZE)
-#define CONFIG_SYS_MALLOC_LEN		SZ_4M
-#define CONFIG_SYS_MEMTEST_START	0x00100000
-#define CONFIG_SYS_MEMTEST_END		0x00200000
-#define CONFIG_LOADADDR			0x00200000
-
-/* Flash */
-#define CONFIG_SYS_NO_FLASH
-
-/* Devices */
-/* GPIO */
-#define CONFIG_BCM2835_GPIO
-/* LCD */
-#define CONFIG_LCD
-#define CONFIG_LCD_DT_SIMPLEFB
-#define LCD_BPP				LCD_COLOR16
-/*
- * Prevent allocation of RAM for FB; the real FB address is queried
- * dynamically from the VideoCore co-processor, and comes from RAM
- * not owned by the ARM CPU.
- */
-#define CONFIG_FB_ADDR			0
-#define CONFIG_VIDEO_BCM2835
-#define CONFIG_SYS_WHITE_ON_BLACK
-
-/* SD/MMC configuration */
-#define CONFIG_GENERIC_MMC
-#define CONFIG_MMC
-#define CONFIG_SDHCI
-#define CONFIG_MMC_SDHCI_IO_ACCESSORS
-#define CONFIG_BCM2835_SDHCI
-
-#define CONFIG_CMD_USB
-#ifdef CONFIG_CMD_USB
-#define CONFIG_USB_DWC2
-#define CONFIG_USB_DWC2_REG_ADDR 0x20980000
-#define CONFIG_USB_STORAGE
-#define CONFIG_USB_HOST_ETHER
-#define CONFIG_USB_ETHER_SMSC95XX
-#define CONFIG_MISC_INIT_R
-#endif
-
-/* Console UART */
-#define CONFIG_PL01X_SERIAL
-#define CONFIG_CONS_INDEX		0
-#define CONFIG_BAUDRATE			115200
-
-/* Console configuration */
-#define CONFIG_SYS_CBSIZE		1024
-#define CONFIG_SYS_PBSIZE		(CONFIG_SYS_CBSIZE +		\
-					 sizeof(CONFIG_SYS_PROMPT) + 16)
-
-/* Environment */
-#define CONFIG_ENV_SIZE			SZ_16K
-#define CONFIG_ENV_IS_IN_FAT
-#define FAT_ENV_INTERFACE		"mmc"
-#define FAT_ENV_DEVICE_AND_PART		"0:1"
-#define FAT_ENV_FILE			"uboot.env"
-#define CONFIG_FAT_WRITE
-#define CONFIG_ENV_VARS_UBOOT_CONFIG
-#define CONFIG_SYS_LOAD_ADDR		0x1000000
-#define CONFIG_CONSOLE_MUX
-#define CONFIG_SYS_CONSOLE_IS_IN_ENV
-
-/* Shell */
-#define CONFIG_SYS_MAXARGS		8
-#define CONFIG_SYS_PROMPT		"U-Boot> "
-#define CONFIG_COMMAND_HISTORY
-
-/* Commands */
-#include <config_cmd_default.h>
-#define CONFIG_CMD_GPIO
-#define CONFIG_CMD_MMC
-#define CONFIG_PARTITION_UUIDS
-#define CONFIG_CMD_PART
-
-/* Device tree support */
-#define CONFIG_OF_BOARD_SETUP
-/* ATAGs support for bootm/bootz */
-#define CONFIG_SETUP_MEMORY_TAGS
-#define CONFIG_CMDLINE_TAG
-#define CONFIG_INITRD_TAG
-
-#include <config_distro_defaults.h>
-
-/* Some things don't make sense on this HW or yet */
-#undef CONFIG_CMD_FPGA
-
-/* Environment */
-#define ENV_DEVICE_SETTINGS \
-	"stdin=serial,lcd\0" \
-	"stdout=serial,lcd\0" \
-	"stderr=serial,lcd\0"
-
-/*
- * Memory layout for where various images get loaded by boot scripts:
- *
- * scriptaddr can be pretty much anywhere that doesn't conflict with something
- *   else. Put it low in memory to avoid conflicts.
- *
- * pxefile_addr_r can be pretty much anywhere that doesn't conflict with
- *   something else. Put it low in memory to avoid conflicts.
- *
- * kernel_addr_r must be within the first 128M of RAM in order for the
- *   kernel's CONFIG_AUTO_ZRELADDR option to work. Since the kernel will
- *   decompress itself to 0x8000 after the start of RAM, kernel_addr_r
- *   should not overlap that area, or the kernel will have to copy itself
- *   somewhere else before decompression. Similarly, the address of any other
- *   data passed to the kernel shouldn't overlap the start of RAM. Pushing
- *   this up to 16M allows for a sizable kernel to be decompressed below the
- *   compressed load address.
- *
- * fdt_addr_r simply shouldn't overlap anything else. Choosing 32M allows for
- *   the compressed kernel to be up to 16M too.
- *
- * ramdisk_addr_r simply shouldn't overlap anything else. Choosing 33M allows
- *   for the FDT/DTB to be up to 1M, which is hopefully plenty.
- */
-#define ENV_MEM_LAYOUT_SETTINGS \
-	"scriptaddr=0x00000000\0" \
-	"pxefile_addr_r=0x00100000\0" \
-	"kernel_addr_r=0x01000000\0" \
-	"fdt_addr_r=0x02000000\0" \
-	"ramdisk_addr_r=0x02100000\0" \
-
-#define BOOT_TARGET_DEVICES(func) \
-	func(MMC, mmc, 0) \
-	func(USB, usb, 0) \
-	func(PXE, pxe, na) \
-	func(DHCP, dhcp, na)
-#include <config_distro_bootcmd.h>
-
-#define CONFIG_EXTRA_ENV_SETTINGS \
-	ENV_DEVICE_SETTINGS \
-	ENV_MEM_LAYOUT_SETTINGS \
-	BOOTENV
-
-#define CONFIG_BOOTDELAY 2
+#include "rpi-common.h"
 
 #endif
diff --git a/include/configs/rpi_2.h b/include/configs/rpi_2.h
new file mode 100644
index 0000000000..2e7e74fd56
--- /dev/null
+++ b/include/configs/rpi_2.h
@@ -0,0 +1,15 @@
+/*
+ * (C) Copyright 2012,2015 Stephen Warren
+ *
+ * SPDX-License-Identifier:	GPL-2.0
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+#define CONFIG_SKIP_LOWLEVEL_INIT
+#define CONFIG_BCM2836
+
+#include "rpi-common.h"
+
+#endif