* Patch by Josef Wagner, 12 Mar 2003:

- 16/32 MB and 50/80 MHz support with auto-detection for IP860 - ETH05 and BEDBUG support for CU824 - added support for MicroSys CPC45 - new BOOTROM/FLASH0 and DOC base for PM826 * Patch by Robert Schwebel, 12 Mar 2003: Fix the chpart command on innokom board * Name cleanup: mv include/asm-i386/ppcboot-i386.h include/asm-i386/u-boot-i386.h s/PPCBoot/U-Boot/ in some files s/pImage/uImage/ in some files * Patch by Detlev Zundel, 15 Jan 2003: Fix '' command line quoting * Patch by The LEOX team, 19 Jan 2003: - add support for the ELPT860 board - add support for Dallas ds164x RTC
author: wdenk <wdenk> 2003-03-12 10:41:04 +0000
committer: wdenk <wdenk> 2003-03-12 10:41:04 +0000
commit: 3bac351370ef7cbf9d2af27ba52bee1703ad677e (patch)
tree: 689fbd22fcde4e63a0f4909acb3ea65475099e9c
parent: 1cb8e980c41e86760fa93de63f4e4cf643bef9d9 (diff)
download: talos-obmc-uboot-3bac351370ef7cbf9d2af27ba52bee1703ad677e.tar.gz
talos-obmc-uboot-3bac351370ef7cbf9d2af27ba52bee1703ad677e.zip
55 files changed, 4249 insertions, 183 deletions
diff --git a/CHANGELOG b/CHANGELOG
index 81fc0729e3..1b36b41a40 100644
--- a/CHANGELOG
+++ b/CHANGELOG
@@ -2,11 +2,32 @@
 Changes since U-Boot 0.2.2:
 ======================================================================
 
+* Patch by Josef Wagner, 12 Mar 2003:
+  - 16/32 MB and 50/80 MHz support with auto-detection for IP860
+  - ETH05 and BEDBUG support for CU824
+  - added support for MicroSys CPC45
+  - new BOOTROM/FLASH0 and DOC base for PM826
+
+* Patch by Robert Schwebel, 12 Mar 2003:
+  Fix the chpart command on innokom board
+
+* Name cleanup:
+  mv include/asm-i386/ppcboot-i386.h include/asm-i386/u-boot-i386.h
+  s/PPCBoot/U-Boot/ in some files
+  s/pImage/uImage/  in some files
+
+* Patch by Detlev Zundel, 15 Jan 2003:
+  Fix '' command line quoting
+
+* Patch by The LEOX team, 19 Jan 2003:
+  - add support for the ELPT860 board
+  - add support for Dallas ds164x RTC
+
 * Patches by David M�ller, 31 Jan 2003:
   - minimal setup for CardBus bridges
   - add EEPROM read/write support in the CS8900 driver
   - add support for the builtin I2C controller in the Samsung s3c24x0 chips
-  - add support for  MPL's VCMA9 (Samsung s3c2410 based) board
+  - add support for MPL's VCMA9 (Samsung s3c2410 based) board
 
 * Patch by Steven Scholz, 04 Feb 2003:
   add support for RTC DS1307
diff --git a/CREDITS b/CREDITS
index 77e609eda4..976044b7de 100644
--- a/CREDITS
+++ b/CREDITS
@@ -166,6 +166,11 @@ N: Thomas Lange
 E: thomas@corelatus.com
 D: Support for GTH board; lots of PCMCIA fixes
 
+N: The LEOX team
+E: team@leox.org
+D: Support for LEOX boards, DS164x RTC
+W: http://www.leox.org
+
 N: Raymond Lo
 E: lo@routefree.com
 D: Support for DOS partitions
diff --git a/MAINTAINERS b/MAINTAINERS
index a673cdcb64..292a290978 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -137,6 +137,10 @@ Thomas Lange <thomas@corelatus.com>
 
 	GTH			MPC860
 
+The LEOX team <team@leox.org>
+
+	ELPT860			MPC860T
+
 Eran Man <eran@nbase.co.il>
 
 	EVB64260_750CX		MPC750CX
diff --git a/MAKEALL b/MAKEALL
index 45e44e723b..37d6c73219 100644
--- a/MAKEALL
+++ b/MAKEALL
@@ -16,18 +16,18 @@ LIST=""
 
 LIST_8xx="	\
 	ADS860		AMX860		c2mon		CCM		\
-	cogent_mpc8xx	ESTEEM192E	ETX094		FADS823		\
-	FADS850SAR	FADS860T	FLAGADM		FPS850L		\
-	GEN860T		GENIETV		GTH		hermes		\
-	IAD210		ICU862_100MHz	IP860		IVML24		\
-	IVML24_128	IVML24_256	IVMS8		IVMS8_128	\
-	IVMS8_256	KUP4K           LANTEC	        lwmon   	\
-	MBX		MBX860T		MHPC		MVS1		\
-	NETVIA		NX823		pcu_e		R360MPI		\
-	RPXClassic	RPXlite		RRvision	SM850		\
-	SPD823TS	SXNI855T	TOP860		TQM823L		\
-	TQM823L_LCD	TQM850L		TQM855L		TQM860L		\
-	TQM860L_FEC	TTTech		v37				\
+	cogent_mpc8xx	ESTEEM192E	ETX094		ELPT860		\
+	FADS823		FADS850SAR	FADS860T	FLAGADM		\
+	FPS850L		GEN860T		GENIETV		GTH		\
+	hermes		IAD210		ICU862_100MHz	IP860		\
+	IVML24		IVML24_128	IVML24_256	IVMS8		\
+	IVMS8_128	IVMS8_256	KUP4K           LANTEC	        \
+	lwmon   	MBX		MBX860T		MHPC		\
+	MVS1		NETVIA		NX823		pcu_e		\
+	R360MPI		RPXClassic	RPXlite		RRvision	\
+	SM850		SPD823TS	SXNI855T	TOP860		\
+	TQM823L		TQM823L_LCD	TQM850L		TQM855L		\
+	TQM860L		TQM860L_FEC	TTTech		v37		\
 "
 
 #########################################################################
@@ -48,9 +48,9 @@ LIST_4xx="	\
 #########################################################################
 
 LIST_824x="	\
-	BMW		CU824		MOUSSE		MUSENKI		\
-	OXC		PN62		Sandpoint8240	Sandpoint8245	\
-	utx8245								\
+	BMW		CPC45		CU824		MOUSSE		\
+	MUSENKI		OXC		PN62		Sandpoint8240	\
+	Sandpoint8245	utx8245						\
 "
 
 #########################################################################
diff --git a/Makefile b/Makefile
index e77a747508..6e6a44d334 100644
--- a/Makefile
+++ b/Makefile
@@ -53,21 +53,6 @@ ifndef CROSS_COMPILE
 ifeq ($(HOSTARCH),ppc)
 CROSS_COMPILE =
 else
-##  #ifeq ($(CPU),mpc8xx)
-##  CROSS_COMPILE = ppc_8xx-
-##  #endif
-##  #ifeq ($(CPU),ppc4xx)
-##  #CROSS_COMPILE = ppc_4xx-
-##  #endif
-##  #ifeq ($(CPU),mpc824x)
-##  #CROSS_COMPILE = ppc_82xx-
-##  #endif
-##  #ifeq ($(CPU),mpc8260)
-##  #CROSS_COMPILE = ppc_82xx-
-##  #endif
-##  #ifeq ($(CPU),74xx_7xx)
-##  #CROSS_COMPILE = ppc_74xx-)
-##  #endif
 ifeq ($(ARCH),ppc)
 CROSS_COMPILE = ppc_8xx-
 endif
@@ -202,6 +187,9 @@ CCM_config:		unconfig
 cogent_mpc8xx_config:	unconfig
 	@./mkconfig $(@:_config=) ppc mpc8xx cogent
 
+ELPT860_config:		unconfig
+	@./mkconfig $(@:_config=) ppc mpc8xx elpt860 LEOX
+
 ESTEEM192E_config:	unconfig
 	@./mkconfig $(@:_config=) ppc mpc8xx esteem192e
 
@@ -457,9 +445,24 @@ WALNUT405_config:unconfig
 #########################################################################
 ## MPC824x Systems
 #########################################################################
+xtract_82xx = $(subst _ROMBOOT,,$(subst _L2,,$(subst _266MHz,,$(subst _300MHz,,$(subst _config,,$1)))))
+
 BMW_config: unconfig
 	@./mkconfig $(@:_config=) ppc mpc824x bmw
 
+CPC45_config	\
+CPC45_ROMBOOT_config:	unconfig
+	@./mkconfig $(call xtract_82xx,$@) ppc mpc824x cpc45
+	@cd ./include ;				\
+	if [ "$(findstring _ROMBOOT_,$@)" ] ; then \
+		echo "CONFIG_BOOT_ROM = y" >> config.mk ; \
+		echo "... booting from 8-bit flash" ; \
+	else \
+		echo "CONFIG_BOOT_ROM = n" >> config.mk ; \
+		echo "... booting from 64-bit flash" ; \
+	fi; \
+	echo "export CONFIG_BOOT_ROM" >> config.mk;
+
 CU824_config: unconfig
 	@./mkconfig $(@:_config=) ppc mpc824x cu824
 
@@ -487,7 +490,6 @@ utx8245_config: unconfig
 #########################################################################
 ## MPC8260 Systems
 #########################################################################
-xtract_82xx = $(subst _ROMBOOT,,$(subst _L2,,$(subst _266MHz,,$(subst _300MHz,,$(subst _config,,$1)))))
 
 cogent_mpc8260_config:	unconfig
 	@./mkconfig $(@:_config=) ppc mpc8260 cogent
diff --git a/README b/README
index 0539d427d2..d70d2af29a 100644
--- a/README
+++ b/README
@@ -145,6 +145,8 @@ Directory Hierarchy:
 - cpu/mpc8260	Files specific to Motorola MPC8260 CPU
 - cpu/ppc4xx	Files specific to IBM	   4xx	   CPUs
 
+- board/LEOX/   Files specific to boards manufactured by The LEOX team
+- board/LEOX/elpt860	Files specific to ELPT860 boards
 - board/RPXClassic
 		Files specific to RPXClassic boards
 - board/RPXlite	Files specific to RPXlite    boards
@@ -338,7 +340,7 @@ The following options need to be configured:
 		CONFIG_GTH,        CONFIG_RPXClassic, CONFIG_rsdproto,
 		CONFIG_IAD210,     CONFIG_RPXlite,    CONFIG_sbc8260,
 		CONFIG_EBONY,      CONFIG_sacsng,     CONFIG_FPS860L,
-		CONFIG_V37
+		CONFIG_V37,        CONFIG_ELPT860
 
 		ARM based boards:
 		-----------------
@@ -626,6 +628,7 @@ The following options need to be configured:
 		CONFIG_RTC_MC146818	- use MC146818 RTC
 		CONFIG_RTC_DS1307	- use Maxim, Inc. DS1307 RTC
 		CONFIG_RTC_DS1337	- use Maxim, Inc. DS1337 RTC
+		CONFIG_RTC_DS164x	- use Dallas DS164x RTC
 
 - Timestamp Support:
 
@@ -1716,6 +1719,7 @@ configurations; the following names are supported:
     FPS850L_config	  Sandpoint8240_config	sbc8260_config
     GENIETV_config	  TQM823L_config	PIP405_config
     GEN860T_config	  EBONY_config		FPS860L_config
+    ELPT860_config
 
 Note: for some board special configuration names may exist; check  if
       additional  information is available from the board vendor; for
diff --git a/board/LEOX/elpt860/Makefile b/board/LEOX/elpt860/Makefile
new file mode 100644
index 0000000000..abca765d72
--- /dev/null
+++ b/board/LEOX/elpt860/Makefile
@@ -0,0 +1,47 @@
+#######################################################################
+#
+# Copyright (C) 2000, 2001, 2002, 2003
+# The LEOX team <team@leox.org>, http://www.leox.org
+#
+# LEOX.org is about the development of free hardware and software resources
+#   for system on chip.
+#
+# Description: U-Boot port on the LEOX's ELPT860 CPU board
+# ~~~~~~~~~~~
+#
+#######################################################################
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+#######################################################################
+
+include $(TOPDIR)/config.mk
+
+LIB	= lib$(BOARD).a
+
+OBJS	= $(BOARD).o flash.o
+
+$(LIB):	.depend $(OBJS)
+	$(AR) crv $@ $^
+
+#########################################################################
+
+.depend:	Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
+		$(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+
+sinclude .depend
+
+#########################################################################
diff --git a/board/LEOX/elpt860/README.LEOX b/board/LEOX/elpt860/README.LEOX
new file mode 100644
index 0000000000..9ace97b3e8
--- /dev/null
+++ b/board/LEOX/elpt860/README.LEOX
@@ -0,0 +1,424 @@
+=============================================================================
+
+             U-Boot port on the LEOX's ELPT860 CPU board
+             -------------------------------------------
+
+LEOX.org is about the development of free hardware and software resources
+         for system on chip.
+
+For more information, contact The LEOX team <team@leox.org>
+
+References:
+~~~~~~~~~~
+    1) Get the last stable release from denx.de:
+           o ftp://ftp.denx.de/pub/u-boot/u-boot-0.2.0.tar.bz2
+    2) Get the current CVS snapshot:
+           o cvs -d:pserver:anonymous@cvs.u-boot.sourceforge.net:/cvsroot/u-boot login
+           o cvs -z6 -d:pserver:anonymous@cvs.u-boot.sourceforge.net:/cvsroot/u-boot co -P u-boot
+
+=============================================================================
+
+The ELPT860 CPU board has the following features:
+
+Processor:	- MPC860T @ 50MHz
+		- PowerPC Core
+		- 65 MIPS
+		- Caches: D->4KB, I->4KB
+		- CPM: 4 SCCs, 2 SMCs
+		- Ethernet 10/100
+		- SPI, I2C, PCMCIA, Parallel
+
+CPU board:	- DRAM:   16 MB
+		- FLASH: 512 KB + (2 * 4 MB)
+		- NVRAM: 128 KB
+		- 1 Serial link
+		- 2 Ethernet 10 BaseT Channels
+
+On power-up the processor jumps to the address of 0x02000100
+
+Thus, U-Boot is configured to reside in flash starting at the address of
+0x02001000.  The environment space is located in NVRAM separately from
+U-Boot, at the address of 0x03000000.
+
+=============================================================================
+
+                        U-Boot test results
+
+=============================================================================
+
+
+##################################################
+# Operation on the serial console (SMC1)
+##############################
+
+U-Boot 0.2.2 (Jan 19 2003 - 11:08:39)
+
+CPU:   XPC860xxZPnnB at 50 MHz: 4 kB I-Cache 4 kB D-Cache FEC present
+         *** Warning: CPU Core has Silicon Bugs -- Check the Errata ***
+Board: ### No HW ID - assuming ELPT860
+DRAM:  16 MB
+FLASH: 512 kB
+In:    serial
+Out:   serial
+Err:   serial
+Net:   SCC ETHERNET
+
+Type "run nfsboot" to mount root filesystem over NFS
+
+Hit any key to stop autoboot:  0
+LEOX_elpt860: help
+askenv  - get environment variables from stdin
+autoscr - run script from memory
+base    - print or set address offset
+bdinfo  - print Board Info structure
+bootm   - boot application image from memory
+bootp   - boot image via network using BootP/TFTP protocol
+bootd   - boot default, i.e., run 'bootcmd'
+cmp     - memory compare
+coninfo - print console devices and informations
+cp      - memory copy
+crc32   - checksum calculation
+echo    - echo args to console
+erase   - erase FLASH memory
+flinfo  - print FLASH memory information
+go      - start application at address 'addr'
+help    - print online help
+iminfo  - print header information for application image
+loadb   - load binary file over serial line (kermit mode)
+loads   - load S-Record file over serial line
+loop    - infinite loop on address range
+md      - memory display
+mm      - memory modify (auto-incrementing)
+mtest   - simple RAM test
+mw      - memory write (fill)
+nm      - memory modify (constant address)
+printenv- print environment variables
+protect - enable or disable FLASH write protection
+rarpboot- boot image via network using RARP/TFTP protocol
+reset   - Perform RESET of the CPU
+run     - run commands in an environment variable
+saveenv - save environment variables to persistent storage
+setenv  - set environment variables
+sleep   - delay execution for some time
+tftpboot- boot image via network using TFTP protocol
+               and env variables ipaddr and serverip
+version - print monitor version
+?       - alias for 'help'
+
+##################################################
+# Environment Variables (CFG_ENV_IS_IN_NVRAM)
+##############################
+
+LEOX_elpt860: printenv
+bootdelay=5
+loads_echo=1
+baudrate=9600
+stdin=serial
+stdout=serial
+stderr=serial
+ethaddr=00:03:ca:00:64:df
+ipaddr=192.168.0.30
+netmask=255.255.255.0
+serverip=192.168.0.1
+nfsserverip=192.168.0.1
+preboot=echo;echo Type "run nfsboot" to mount root filesystem over NFS;echo
+gatewayip=192.168.0.1
+ramargs=setenv bootargs root=/dev/ram rw
+rootargs=setenv rootpath /tftp/$(ipaddr)
+nfsargs=setenv bootargs root=/dev/nfs rw nfsroot=$(nfsserverip):$(rootpath)
+addip=setenv bootargs $(bootargs) ip=$(ipaddr):$(nfsserverip):$(gatewayip):$(netmask):$(hostname):eth0:
+ramboot=tftp 400000 /home/leox/pMulti;run ramargs;bootm
+nfsboot=tftp 400000 /home/leox/uImage;run rootargs;run nfsargs;run addip;bootm
+bootcmd=run ramboot
+clocks_in_mhz=1
+
+Environment size: 730/16380 bytes
+
+##################################################
+# Flash Memory Information
+##############################
+
+LEOX_elpt860: flinfo
+
+Bank # 1: AMD AM29F040   (4 Mbits)
+  Size: 512 KB in 8 Sectors
+  Sector Start Addresses:
+    02000000 (RO) 02010000 (RO) 02020000 (RO) 02030000 (RO) 02040000     
+    02050000      02060000      02070000     
+
+##################################################
+# Board Information Structure
+##############################
+
+LEOX_elpt860: bdinfo
+memstart    = 0x00000000
+memsize     = 0x01000000
+flashstart  = 0x02000000
+flashsize   = 0x00080000
+flashoffset = 0x00030000
+sramstart   = 0x00000000
+sramsize    = 0x00000000
+immr_base   = 0xFF000000
+bootflags   = 0x00000001
+intfreq     =     50 MHz
+busfreq     =     50 MHz
+ethaddr     = 00:03:ca:00:64:df
+IP addr     = 192.168.0.30
+baudrate    =   9600 bps
+
+##################################################
+# Image Download and run over serial port
+#    hello_world (S-Record image)
+#    ===> 1) Enter "loads" command into U-Boot monitor
+#    ===> 2) From TeraTerm's bar menu, Select 'File/Send file...'
+#            Then select 'hello_world.srec' with the file browser
+##############################
+
+U-Boot 0.2.2 (Jan 19 2003 - 11:08:39)
+
+CPU:   XPC860xxZPnnB at 50 MHz: 4 kB I-Cache 4 kB D-Cache FEC present
+         *** Warning: CPU Core has Silicon Bugs -- Check the Errata ***
+Board: ### No HW ID - assuming ELPT860
+DRAM:  16 MB
+FLASH: 512 kB
+In:    serial
+Out:   serial
+Err:   serial
+Net:   SCC ETHERNET
+
+Type "run nfsboot" to mount root filesystem over NFS
+
+Hit any key to stop autoboot:  0
+LEOX_elpt860: loads
+## Ready for S-Record download ...
+S804040004F3050154000501709905014C000501388D
+## First Load Addr = 0x00040000
+## Last  Load Addr = 0x0005018B
+## Total Size      = 0x0001018C = 65932 Bytes
+## Start Addr      = 0x00040004
+LEOX_elpt860: go 40004 This is a test !!!
+## Starting application at 0x00040004 ...
+Hello World
+argc = 6
+argv[0] = "40004"
+argv[1] = "This"
+argv[2] = "is"
+argv[3] = "a"
+argv[4] = "test"
+argv[5] = "!!!"
+argv[6] = "<NULL>"
+Hit any key to exit ...
+
+## Application terminated, rc = 0x0
+
+##################################################
+# Image download and run over ethernet interface
+#    Linux-2.4.4 (uImage) + Root filesystem mounted over NFS
+##############################
+
+U-Boot 0.2.2 (Jan 19 2003 - 11:08:39)
+
+CPU:   XPC860xxZPnnB at 50 MHz: 4 kB I-Cache 4 kB D-Cache FEC present
+         *** Warning: CPU Core has Silicon Bugs -- Check the Errata ***
+Board: ### No HW ID - assuming ELPT860
+DRAM:  16 MB
+FLASH: 512 kB
+In:    serial
+Out:   serial
+Err:   serial
+Net:   SCC ETHERNET
+
+Type "run nfsboot" to mount root filesystem over NFS
+
+Hit any key to stop autoboot:  0
+LEOX_elpt860: run nfsboot
+ARP broadcast 1
+TFTP from server 192.168.0.1; our IP address is 192.168.0.30
+Filename '/home/leox/uImage'.
+Load address: 0x400000
+Loading: #################################################################
+         #############################
+done
+Bytes transferred = 477294 (7486e hex)
+## Booting image at 00400000 ...
+   Image Name:   Linux-2.4.4
+   Image Type:   PowerPC Linux Kernel Image (gzip compressed)
+   Data Size:    477230 Bytes = 466 kB = 0 MB
+   Load Address: 00000000
+   Entry Point:  00000000
+   Verifying Checksum ... OK
+   Uncompressing Kernel Image ... OK
+Linux version 2.4.4-rthal5 (leox@p5ak6650) (gcc version 2.95.3 20010315 (release/MontaVista)) #1 Wed Jul 3 10:23:53 CEST 2002
+On node 0 totalpages: 4096
+zone(0): 4096 pages.
+zone(1): 0 pages.
+zone(2): 0 pages.
+Kernel command line: root=/dev/nfs rw nfsroot=192.168.0.1:/tftp/192.168.0.30 ip=192.168.0.30:192.168.0.1:192.168.0.1:255.255.255.0::eth0:
+rtsched version <20010618.1050.24>
+Decrementer Frequency: 3125000
+Warning: real time clock seems stuck!
+Calibrating delay loop... 49.76 BogoMIPS
+Memory: 14720k available (928k kernel code, 384k data, 44k init, 0k highmem)
+Dentry-cache hash table entries: 2048 (order: 2, 16384 bytes)
+Buffer-cache hash table entries: 1024 (order: 0, 4096 bytes)
+Page-cache hash table entries: 4096 (order: 2, 16384 bytes)
+Inode-cache hash table entries: 1024 (order: 1, 8192 bytes)
+POSIX conformance testing by UNIFIX
+Linux NET4.0 for Linux 2.4
+Based upon Swansea University Computer Society NET3.039
+Starting kswapd v1.8
+CPM UART driver version 0.03
+ttyS0 on SMC1 at 0x0280, BRG1
+block: queued sectors max/low 9701kB/3233kB, 64 slots per queue
+RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
+eth0: CPM ENET Version 0.2 on SCC1, 00:03:ca:00:64:df
+NET4: Linux TCP/IP 1.0 for NET4.0
+IP Protocols: ICMP, UDP, TCP
+IP: routing cache hash table of 512 buckets, 4Kbytes
+TCP: Hash tables configured (established 1024 bind 1024)
+NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
+Looking up port of RPC 100003/2 on 192.168.0.1
+Looking up port of RPC 100005/2 on 192.168.0.1
+VFS: Mounted root (nfs filesystem).
+Freeing unused kernel memory: 44k init
+INIT: version 2.78 booting
+                Welcome to DENX Embedded Linux Environment
+                Press 'I' to enter interactive startup.
+Mounting proc filesystem:  [  OK  ]
+Configuring kernel parameters:  [  OK  ]
+Cannot access the Hardware Clock via any known method.
+Use the --debug option to see the details of our search for an access method.
+Setting clock : Wed Dec 31 19:00:11 EST 1969 [  OK  ]
+Activating swap partitions:  [  OK  ]
+Setting hostname 192.168.0.30:  [  OK  ]
+Finding module dependencies:
+[  OK  ]
+Checking filesystems
+Checking all file systems.
+[  OK  ]
+Mounting local filesystems:  [  OK  ]
+Enabling swap space:  [  OK  ]
+INIT: Entering runlevel: 3
+Entering non-interactive startup
+Starting system logger: [  OK  ]
+Starting kernel logger: [  OK  ]
+Starting xinetd: [  OK  ]
+
+192 login: root
+Last login: Wed Dec 31 19:00:41 on ttyS0
+bash-2.04#
+
+##################################################
+# Image download and run over ethernet interface
+#    Linux-2.4.4 + Root filesystem mounted from RAM (pMulti)
+##############################
+
+U-Boot 0.2.2 (Jan 19 2003 - 11:08:39)
+
+CPU:   XPC860xxZPnnB at 50 MHz: 4 kB I-Cache 4 kB D-Cache FEC present
+         *** Warning: CPU Core has Silicon Bugs -- Check the Errata ***
+Board: ### No HW ID - assuming ELPT860
+DRAM:  16 MB
+FLASH: 512 kB
+In:    serial
+Out:   serial
+Err:   serial
+Net:   SCC ETHERNET
+
+Type "run nfsboot" to mount root filesystem over NFS
+
+Hit any key to stop autoboot:  0
+LEOX_elpt860: run ramboot
+ARP broadcast 1
+TFTP from server 192.168.0.1; our IP address is 192.168.0.30
+Filename '/home/leox/pMulti'.
+Load address: 0x400000
+Loading: #################################################################
+         #################################################################
+         #################################################################
+         #################################################################
+         #################################################################
+         ########################################################
+done
+Bytes transferred = 1947816 (1db8a8 hex)
+## Booting image at 00400000 ...
+   Image Name:   linux-2.4.4-2002-03-21 Multiboot
+   Image Type:   PowerPC Linux Multi-File Image (gzip compressed)
+   Data Size:    1947752 Bytes = 1902 kB = 1 MB
+   Load Address: 00000000
+   Entry Point:  00000000
+   Contents:
+   Image 0:   477230 Bytes = 466 kB = 0 MB
+   Image 1:  1470508 Bytes = 1436 kB = 1 MB
+   Verifying Checksum ... OK
+   Uncompressing Multi-File Image ... OK
+   Loading Ramdisk to 00e44000, end 00fab02c ... OK
+Linux version 2.4.4-rthal5 (leox@p5ak6650) (gcc version 2.95.3 20010315 (release/MontaVista)) #1 Wed Jul 3 10:23:53 CEST 2002
+On node 0 totalpages: 4096
+zone(0): 4096 pages.
+zone(1): 0 pages.
+zone(2): 0 pages.
+Kernel command line: root=/dev/ram rw
+rtsched version <20010618.1050.24>
+Decrementer Frequency: 3125000
+Warning: real time clock seems stuck!
+Calibrating delay loop... 49.76 BogoMIPS
+Memory: 13280k available (928k kernel code, 384k data, 44k init, 0k highmem)
+Dentry-cache hash table entries: 2048 (order: 2, 16384 bytes)
+Buffer-cache hash table entries: 1024 (order: 0, 4096 bytes)
+Page-cache hash table entries: 4096 (order: 2, 16384 bytes)
+Inode-cache hash table entries: 1024 (order: 1, 8192 bytes)
+POSIX conformance testing by UNIFIX
+Linux NET4.0 for Linux 2.4
+Based upon Swansea University Computer Society NET3.039
+Starting kswapd v1.8
+CPM UART driver version 0.03
+ttyS0 on SMC1 at 0x0280, BRG1
+block: queued sectors max/low 8741kB/2913kB, 64 slots per queue
+RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
+eth0: CPM ENET Version 0.2 on SCC1, 00:03:ca:00:64:df
+RAMDISK: Compressed image found at block 0
+Freeing initrd memory: 1436k freed
+NET4: Linux TCP/IP 1.0 for NET4.0
+IP Protocols: ICMP, UDP, TCP
+IP: routing cache hash table of 512 buckets, 4Kbytes
+TCP: Hash tables configured (established 1024 bind 1024)
+IP-Config: Incomplete network configuration information.
+NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
+VFS: Mounted root (ext2 filesystem).
+Freeing unused kernel memory: 44k in�
+init started:  BusyBox v0.60.2 (2002.07.01-12:06+0000) multi-call Configuring hostname
+Configuring lo...
+Configuring eth0...
+Configuring Gateway...
+
+Please press Enter to activate this console.
+
+ELPT860 login: root
+Password:
+Welcome to Linux-2.4.4 for ELPT CPU board (MPC860T @ 50MHz)
+
+                                              a8888b.
+                                             d888888b.
+                                             8P"YP"Y88
+     _      _                                8|o||o|88
+    | |    |_|                               8'    .88
+    | |     _ ____  _   _  _  _              8`._.' Y8.
+    | |    | |  _ \| | | |\ \/ /            d/      `8b.
+    | |___ | | | | | |_| |/    \          .dP   .     Y8b.
+    |_____||_|_| |_|\____|\_/\_/         d8:'   "   `::88b.
+                                        d8"           `Y88b
+                                       :8P     '       :888
+                                        8a.    :      _a88P
+                                      ._/"Yaa_ :    .| 88P|
+                                      \    YP"      `| 8P  `.
+                                      /     \._____.d|    .'
+                                      `--..__)888888P`._.'
+login[21]: root login  on `ttyS0'
+
+
+
+BusyBox v0.60.3 (2002.07.20-10:39+0000) Built-in shell (ash)
+Enter 'help' for a list of built-in commands.
+
+root@ELPT860:~ #
diff --git a/board/LEOX/elpt860/config.mk b/board/LEOX/elpt860/config.mk
new file mode 100644
index 0000000000..defc360800
--- /dev/null
+++ b/board/LEOX/elpt860/config.mk
@@ -0,0 +1,36 @@
+#######################################################################
+#
+# Copyright (C) 2000, 2001, 2002, 2003
+# The LEOX team <team@leox.org>, http://www.leox.org
+#
+# LEOX.org is about the development of free hardware and software resources
+#   for system on chip.
+#
+# Description: U-Boot port on the LEOX's ELPT860 CPU board
+# ~~~~~~~~~~~
+#
+#######################################################################
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+#######################################################################
+
+#
+# ELPT860 board
+#
+
+TEXT_BASE = 0x02000000
+#TEXT_BASE = 0x00FB0000
diff --git a/board/LEOX/elpt860/elpt860.c b/board/LEOX/elpt860/elpt860.c
new file mode 100644
index 0000000000..25645462ff
--- /dev/null
+++ b/board/LEOX/elpt860/elpt860.c
@@ -0,0 +1,399 @@
+/*
+**=====================================================================
+**
+** Copyright (C) 2000, 2001, 2002, 2003
+** The LEOX team <team@leox.org>, http://www.leox.org
+**
+** LEOX.org is about the development of free hardware and software resources
+**   for system on chip.
+**
+** Description: U-Boot port on the LEOX's ELPT860 CPU board
+** ~~~~~~~~~~~
+**
+**=====================================================================
+**
+** This program is free software; you can redistribute it and/or
+** modify it under the terms of the GNU General Public License as
+** published by the Free Software Foundation; either version 2 of
+** the License, or (at your option) any later version.
+**
+** This program is distributed in the hope that it will be useful,
+** but WITHOUT ANY WARRANTY; without even the implied warranty of
+** MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+** GNU General Public License for more details.
+**
+** You should have received a copy of the GNU General Public License
+** along with this program; if not, write to the Free Software
+** Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+** MA 02111-1307 USA
+**
+**=====================================================================
+*/
+
+/*
+** Note 1: In this file, you have to provide the following functions:
+** ------
+**              int             board_pre_init(void)
+**              int             checkboard(void)
+**              long int        initdram(int board_type)
+** called from 'board_init_f()' into 'common/board.c'
+**
+**              void            reset_phy(void)
+** called from 'board_init_r()' into 'common/board.c'
+*/
+
+#include <common.h>
+#include <mpc8xx.h>
+
+/* ------------------------------------------------------------------------- */
+
+static long int dram_size (long int, long int *, long int);
+
+/* ------------------------------------------------------------------------- */
+
+#define	_NOT_USED_	0xFFFFFFFF
+
+const uint init_sdram_table[] =
+{
+  /*
+   * Single Read. (Offset 0 in UPMA RAM)
+   */
+  0x0FFCCC04, 0xFFFFFC04, 0x0FFC3C04, 0xFFFFFC04,
+  0xFFFFFC04, /* last */
+  /*
+   * SDRAM Initialization (offset 5 in UPMA RAM)
+   *
+   * This is no UPM entry point. The following definition uses
+   * the remaining space to establish an initialization
+   * sequence, which is executed by a RUN command.
+   *
+   */
+  0xFFFFFC04, 0xFFFFFC04, 0x0FFC3C04,  /* last */
+  /*
+   * Burst Read. (Offset 8 in UPMA RAM)
+   */
+  0xFFFFFC04, 0xFFFFFC04, 0xFFFFFC04, 0xFFFFFC04,
+  0x0FFC3C04, 0xFFFFFC04, 0xFFFFFC04, 0xFFFFFC04,
+  0xFFFFFC04, 0x0FFC3C04, 0xFFFFFC04, 0xFFFFFC04,
+  0xFFFFFC04, 0xFFFFFC04, 0x0FFC3C04, 0xFFFFFC04, /* last */
+  /*
+   * Single Write. (Offset 18 in UPMA RAM)
+   */
+  0xFFFFFC04, 0xFFFFFC04, 0xFFFFFC04, 0x0FFC3C04,
+  0xFFFFFC04, 0xFFFFFC04, 0x0FFFFC04, 0xFFFFFC04, /* last */
+  /*
+   * Burst Write. (Offset 20 in UPMA RAM)
+   */
+  0x0FFC3C04, 0xFFFFFC04, 0xFFFFFC04, 0xFFFFFC04,
+  0xFFFFFC04, 0x0FFC3C04, 0xFFFFFC04, 0xFFFFFC04,
+  0xFFFFFC04, 0xFFFFFC04, 0xFFFFFC34, 0x0FAC0C34,
+  0xFFFFFC05, 0xFFFFFC04, 0x0FFCFC04, 0xFFFFFC05, /* last */
+};
+
+const uint sdram_table[] =
+{
+  /*
+   * Single Read. (Offset 0 in UPMA RAM)
+   */
+  0x0F0FFC24, 0x0F0CFC04, 0xFF0FFC04, 0x00AF3C04, 
+  0xFF0FFC00, /* last */
+  /*
+   * SDRAM Initialization (offset 5 in UPMA RAM)
+   *
+   * This is no UPM entry point. The following definition uses
+   * the remaining space to establish an initialization
+   * sequence, which is executed by a RUN command.
+   *
+   */
+  0x0FFCCC04, 0xFFAFFC05, 0xFFAFFC05, /* last */
+  /*
+   * Burst Read. (Offset 8 in UPMA RAM)
+   */
+  0x0F0FFC24, 0x0F0CFC04, 0xFF0FFC04, 0x00AF3C04, 
+  0xF00FFC00, 0xF00FFC00, 0xF00FFC00, 0xFF0FFC00,
+  0x0FFCCC04, 0xFFAFFC05, 0xFFAFFC04, 0xFFAFFC04, 
+  0xFFAFFC04, 0xFFAFFC04, 0xFFAFFC04, 0xFFAFFC04, /* last */
+  /*
+   * Single Write. (Offset 18 in UPMA RAM)
+   */
+  0x0F0FFC24, 0x0F0CFC04, 0xFF0FFC04, 0x00AF0C00, 
+  0xFF0FFC04, 0x0FFCCC04, 0xFFAFFC05, /* last */
+  _NOT_USED_, 
+  /*
+   * Burst Write. (Offset 20 in UPMA RAM)
+   */
+  0x0F0FFC24, 0x0F0CFC04, 0xFF0FFC00, 0x00AF0C00, 
+  0xF00FFC00, 0xF00FFC00, 0xF00FFC04, 0x0FFCCC04, 
+  0xFFAFFC04, 0xFFAFFC05, 0xFFAFFC04, 0xFFAFFC04, 
+  0xFFAFFC04, 0xFFAFFC04, 0xFFAFFC04, 0xFFAFFC04, /* last */
+  /*
+   * Refresh  (Offset 30 in UPMA RAM)
+   */
+  0x0FFC3C04, 0xFFFFFC04, 0xFFFFFC04, 0xFFFFFC04, 
+  0xFFFFFC05, 0xFFFFFC04, 0xFFFFFC05, _NOT_USED_, 
+  0xFFAFFC04, 0xFFAFFC04, 0xFFAFFC04, 0xFFAFFC04, /* last */
+  /*
+   * Exception. (Offset 3c in UPMA RAM)
+   */
+  0x0FFFFC34, 0x0FAC0C34, 0xFFFFFC05, 0xFFAFFC04, /* last */
+};
+
+/* ------------------------------------------------------------------------- */
+
+#define CFG_PC4    0x0800
+
+#define CFG_DS1    CFG_PC4
+
+/*
+ * Very early board init code (fpga boot, etc.)
+ */
+int
+board_pre_init (void)
+{
+  volatile immap_t *immr = (immap_t *) CFG_IMMR;
+
+  /* 
+   * Light up the red led on ELPT860 pcb (DS1) (PCDAT) 
+   */
+  immr->im_ioport.iop_pcdat &= ~CFG_DS1;   /* PCDAT (DS1 = 0)                */
+  immr->im_ioport.iop_pcpar &= ~CFG_DS1;   /* PCPAR (0=general purpose I/O)  */
+  immr->im_ioport.iop_pcdir |=  CFG_DS1;   /* PCDIR (I/O: 0=input, 1=output) */
+
+  return ( 0 );    /* success */
+}
+
+/*
+ * Check Board Identity:
+ *
+ * Test ELPT860 ID string
+ *
+ * Return 1 if no second DRAM bank, otherwise returns 0
+ */
+
+int 
+checkboard (void)
+{
+    unsigned char *s = getenv("serial#");
+
+    if ( !s || strncmp(s, "ELPT860", 7) )
+      printf ("### No HW ID - assuming ELPT860\n");
+    
+    return ( 0 );    /* success */
+}
+
+/* ------------------------------------------------------------------------- */
+
+long int 
+initdram (int board_type)
+{
+    volatile immap_t     *immap  = (immap_t *)CFG_IMMR;
+    volatile memctl8xx_t *memctl = &immap->im_memctl;
+    long int              size8, size9;
+    long int              size_b0 = 0;
+
+    /*
+     * This sequence initializes SDRAM chips on ELPT860 board
+     */
+    upmconfig(UPMA, (uint *)init_sdram_table, 
+	      sizeof(init_sdram_table)/sizeof(uint));
+
+    memctl->memc_mptpr = 0x0200;
+    memctl->memc_mamr  = 0x18002111;
+
+    memctl->memc_mar   = 0x00000088;
+    memctl->memc_mcr   = 0x80002000;	/* CS1: SDRAM bank 0 */
+
+    upmconfig(UPMA, (uint *)sdram_table, 
+	      sizeof(sdram_table)/sizeof(uint));
+
+    /*
+     * Preliminary prescaler for refresh (depends on number of
+     * banks): This value is selected for four cycles every 62.4 us
+     * with two SDRAM banks or four cycles every 31.2 us with one
+     * bank. It will be adjusted after memory sizing.
+     */
+    memctl->memc_mptpr = CFG_MPTPR_2BK_8K;
+
+    /*
+     * The following value is used as an address (i.e. opcode) for
+     * the LOAD MODE REGISTER COMMAND during SDRAM initialisation. If
+     * the port size is 32bit the SDRAM does NOT "see" the lower two
+     * address lines, i.e. mar=0x00000088 -> opcode=0x00000022 for
+     * MICRON SDRAMs:
+     * ->    0 00 010 0 010
+     *       |  |   | |   +- Burst Length = 4
+     *       |  |   | +----- Burst Type   = Sequential
+     *       |  |   +------- CAS Latency  = 2
+     *       |  +----------- Operating Mode = Standard
+     *       +-------------- Write Burst Mode = Programmed Burst Length
+     */
+    memctl->memc_mar   = 0x00000088;
+
+    /*
+     * Map controller banks 2 and 3 to the SDRAM banks 2 and 3 at
+     * preliminary addresses - these have to be modified after the
+     * SDRAM size has been determined.
+     */
+    memctl->memc_or1   = CFG_OR1_PRELIM;
+    memctl->memc_br1   = CFG_BR1_PRELIM;
+
+    memctl->memc_mamr  = CFG_MAMR_8COL & (~(MAMR_PTAE)); /* no refresh yet */
+
+    udelay (200);
+
+    /* perform SDRAM initializsation sequence */
+
+    memctl->memc_mcr   = 0x80002105;	/* CS1: SDRAM bank 0 */
+    udelay (1);
+    memctl->memc_mcr   = 0x80002230;	/* CS1: SDRAM bank 0 - execute twice */
+    udelay (1);
+
+    memctl->memc_mamr |= MAMR_PTAE;	/* enable refresh */
+
+    udelay (1000);
+
+    /*
+     * Check Bank 0 Memory Size for re-configuration
+     *
+     * try 8 column mode
+     */
+    size8 = dram_size (CFG_MAMR_8COL, 
+		       (ulong *) SDRAM_BASE1_PRELIM, 
+		       SDRAM_MAX_SIZE);
+
+    udelay (1000);
+
+    /*
+     * try 9 column mode
+     */
+    size9 = dram_size (CFG_MAMR_9COL, 
+		       (ulong *) SDRAM_BASE1_PRELIM, 
+		       SDRAM_MAX_SIZE);
+
+    if ( size8 < size9 )    /* leave configuration at 9 columns	*/
+      {
+	size_b0 = size9;
+	/* debug ("SDRAM Bank 0 in 9 column mode: %ld MB\n", size >> 20); */
+      } 
+    else                  /* back to 8 columns			*/
+      {
+	size_b0 = size8;
+	memctl->memc_mamr = CFG_MAMR_8COL;
+	udelay (500);
+	/* debug ("SDRAM Bank 0 in 8 column mode: %ld MB\n", size >> 20); */
+      }
+    
+    udelay (1000);
+
+    /*
+     * Adjust refresh rate depending on SDRAM type, both banks
+     * For types > 128 MBit leave it at the current (fast) rate
+     */
+    if ( size_b0 < 0x02000000 ) 
+      {
+	/* reduce to 15.6 us (62.4 us / quad) */
+	memctl->memc_mptpr = CFG_MPTPR_2BK_4K;
+	udelay (1000);
+      }
+
+    /*
+     * Final mapping: map bigger bank first
+     */
+    memctl->memc_or1 = ((-size_b0) & 0xFFFF0000) | CFG_OR_TIMING_SDRAM;
+    memctl->memc_br1 = (CFG_SDRAM_BASE & BR_BA_MSK) | BR_MS_UPMA | BR_V;
+
+    {
+      unsigned long reg;
+      
+      /* adjust refresh rate depending on SDRAM type, one bank */
+      reg = memctl->memc_mptpr;
+      reg >>= 1;	/* reduce to CFG_MPTPR_1BK_8K / _4K */
+      memctl->memc_mptpr = reg;
+    }
+
+    udelay(10000);
+    
+    return (size_b0);
+}
+
+/* ------------------------------------------------------------------------- */
+
+/*
+ * Check memory range for valid RAM. A simple memory test determines
+ * the actually available RAM size between addresses `base' and
+ * `base + maxsize'. Some (not all) hardware errors are detected:
+ * - short between address lines
+ * - short between data lines
+ */
+
+static long int 
+dram_size (long int   mamr_value, 
+	   long int  *base, 
+	   long int   maxsize)
+{
+  volatile immap_t     *immap  = (immap_t *)CFG_IMMR;
+  volatile memctl8xx_t *memctl = &immap->im_memctl;
+  volatile long int    *addr;
+  ulong                 cnt, val;
+  ulong                 save[32];    /* to make test non-destructive */
+  unsigned char         i = 0;
+  
+  memctl->memc_mamr = mamr_value;
+  
+  for (cnt = maxsize/sizeof(long); cnt > 0; cnt >>= 1) 
+    {
+      addr = base + cnt;    /* pointer arith! */
+      
+      save[i++] = *addr;
+      *addr     = ~cnt;
+    }
+  
+  /* write 0 to base address */
+  addr    = base;
+  save[i] = *addr;
+  *addr   = 0;
+  
+  /* check at base address */
+  if ( (val = *addr) != 0 ) 
+    {
+      *addr = save[i];
+
+      return (0);
+    }
+  
+  for (cnt = 1; cnt <= maxsize/sizeof(long); cnt <<= 1) 
+    {
+      addr = base + cnt;    /* pointer arith! */
+      
+      val   = *addr;
+      *addr = save[--i];
+      
+      if ( val != (~cnt) ) 
+	{
+	  return (cnt * sizeof(long));
+	}
+    }
+
+  return (maxsize);
+}
+
+/* ------------------------------------------------------------------------- */
+
+#define CFG_PA1     0x4000
+#define CFG_PA2     0x2000
+
+#define CFG_LBKs    (CFG_PA2 | CFG_PA1)
+
+void
+reset_phy (void)
+{
+  volatile immap_t *immr = (immap_t *) CFG_IMMR;
+  
+  /*
+   * Ensure LBK LXT901 ethernet 1 & 2 = 0 ... for normal loopback in effect
+   *                                          and no AUI loopback
+   */
+  immr->im_ioport.iop_padat &= ~CFG_LBKs;  /* PADAT (LBK eth 1&2 = 0)        */
+  immr->im_ioport.iop_papar &= ~CFG_LBKs;  /* PAPAR (0=general purpose I/O)  */
+  immr->im_ioport.iop_padir |=  CFG_LBKs;  /* PADIR (I/O: 0=input, 1=output) */
+}
diff --git a/board/LEOX/elpt860/flash.c b/board/LEOX/elpt860/flash.c
new file mode 100644
index 0000000000..a9238e16cf
--- /dev/null
+++ b/board/LEOX/elpt860/flash.c
@@ -0,0 +1,615 @@
+/*
+**=====================================================================
+**
+** Copyright (C) 2000, 2001, 2002, 2003
+** The LEOX team <team@leox.org>, http://www.leox.org
+**
+** LEOX.org is about the development of free hardware and software resources
+**   for system on chip.
+**
+** Description: U-Boot port on the LEOX's ELPT860 CPU board
+** ~~~~~~~~~~~
+**
+**=====================================================================
+**
+** This program is free software; you can redistribute it and/or
+** modify it under the terms of the GNU General Public License as
+** published by the Free Software Foundation; either version 2 of
+** the License, or (at your option) any later version.
+**
+** This program is distributed in the hope that it will be useful,
+** but WITHOUT ANY WARRANTY; without even the implied warranty of
+** MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+** GNU General Public License for more details.
+**
+** You should have received a copy of the GNU General Public License
+** along with this program; if not, write to the Free Software
+** Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+** MA 02111-1307 USA
+**
+**=====================================================================
+*/
+
+/*
+** Note 1: In this file, you have to provide the following variable:
+** ------
+**              flash_info_t    flash_info[CFG_MAX_FLASH_BANKS]
+** 'flash_info_t' structure is defined into 'include/flash.h'
+** and defined as extern into 'common/cmd_flash.c'
+**
+** Note 2: In this file, you have to provide the following functions:
+** ------
+**              unsigned long   flash_init(void)
+** called from 'board_init_r()' into 'common/board.c'
+**
+**              void            flash_print_info(flash_info_t *info)
+** called from 'do_flinfo()' into 'common/cmd_flash.c'
+**
+**              int             flash_erase(flash_info_t *info,
+**                                          int           s_first,
+**                                          int           s_last)
+** called from 'do_flerase()' & 'flash_sect_erase()' into 'common/cmd_flash.c'
+**
+**              int             write_buff (flash_info_t *info,
+**                                          uchar        *src,
+**                                          ulong         addr,
+**                                          ulong         cnt)
+** called from 'flash_write()' into 'common/cmd_flash.c'
+*/
+
+#include <common.h>
+#include <mpc8xx.h>
+
+
+#ifndef	CFG_ENV_ADDR
+#  define CFG_ENV_ADDR	(CFG_FLASH_BASE + CFG_ENV_OFFSET)
+#endif
+
+flash_info_t	flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips */
+
+/*-----------------------------------------------------------------------
+ * Internal Functions
+ */
+static void   flash_get_offsets (ulong base, flash_info_t *info);
+static ulong  flash_get_size (volatile unsigned char *addr, flash_info_t *info);
+
+static int write_word (flash_info_t *info, ulong dest, ulong data);
+static int write_byte (flash_info_t *info, ulong dest, uchar data);
+
+/*-----------------------------------------------------------------------
+ */
+
+unsigned long 
+flash_init (void)
+{
+  volatile immap_t     *immap  = (immap_t *)CFG_IMMR;
+  volatile memctl8xx_t *memctl = &immap->im_memctl;
+  unsigned long         size_b0;
+  int i;
+  
+  /* Init: no FLASHes known */
+  for (i=0; i<CFG_MAX_FLASH_BANKS; ++i) 
+    {
+      flash_info[i].flash_id = FLASH_UNKNOWN;
+    }
+  
+  /* Static FLASH Bank configuration here - FIXME XXX */
+  
+  size_b0 = flash_get_size ((volatile unsigned char *)FLASH_BASE0_PRELIM, 
+			    &flash_info[0]);
+  
+  if ( flash_info[0].flash_id == FLASH_UNKNOWN ) 
+    {
+      printf ("## Unknown FLASH on Bank 0 - Size = 0x%08lx = %ld MB\n",
+	      size_b0, size_b0<<20);
+    }
+  
+  /* Remap FLASH according to real size */
+  memctl->memc_or0 = CFG_OR_TIMING_FLASH | (-size_b0 & OR_AM_MSK);
+  memctl->memc_br0 = (CFG_FLASH_BASE & BR_BA_MSK) | BR_MS_GPCM | BR_PS_8 | BR_V;
+  
+  /* Re-do sizing to get full correct info */
+  size_b0 = flash_get_size ((volatile unsigned char *)CFG_FLASH_BASE, 
+			    &flash_info[0]);
+  
+  flash_get_offsets (CFG_FLASH_BASE, &flash_info[0]);
+  
+#if CFG_MONITOR_BASE >= CFG_FLASH_BASE
+  /* monitor protection ON by default */
+  flash_protect (FLAG_PROTECT_SET,
+		 CFG_MONITOR_BASE,
+		 CFG_MONITOR_BASE + CFG_MONITOR_LEN-1,
+		 &flash_info[0]);
+#endif
+  
+#ifdef	CFG_ENV_IS_IN_FLASH
+  /* ENV protection ON by default */
+  flash_protect(FLAG_PROTECT_SET,
+		CFG_ENV_ADDR,
+		CFG_ENV_ADDR + CFG_ENV_SIZE-1,
+		&flash_info[0]);
+#endif
+
+  flash_info[0].size = size_b0;
+  
+  return (size_b0);
+}
+
+/*-----------------------------------------------------------------------
+ */
+static void 
+flash_get_offsets (ulong          base, 
+		   flash_info_t  *info)
+{
+  int i;
+
+#define SECTOR_64KB    0x00010000
+
+  /* set up sector start adress table */
+  for (i = 0; i < info->sector_count; i++) 
+    {
+      info->start[i] = base + (i * SECTOR_64KB);
+    }
+}
+
+/*-----------------------------------------------------------------------
+ */
+void 
+flash_print_info (flash_info_t *info)
+{
+  int i;
+  
+  if ( info->flash_id == FLASH_UNKNOWN ) 
+    {
+      printf ("missing or unknown FLASH type\n");
+      return;
+    }
+
+  switch ( info->flash_id & FLASH_VENDMASK ) 
+    {
+    case FLASH_MAN_AMD:	printf ("AMD ");		break;
+    case FLASH_MAN_FUJ:	printf ("FUJITSU ");		break;
+    case FLASH_MAN_STM: printf ("STM (Thomson) ");      break;
+    default:		printf ("Unknown Vendor ");	break;
+    }
+  
+  switch ( info->flash_id & FLASH_TYPEMASK ) 
+    {
+    case FLASH_AM040:   printf ("AM29F040   (4 Mbits)\n");
+      break;
+    default:	        printf ("Unknown Chip Type\n");
+      break;
+    }
+  
+  printf ("  Size: %ld KB in %d Sectors\n", 
+	  info->size >> 10, info->sector_count);
+  
+  printf ("  Sector Start Addresses:");
+  for (i=0; i<info->sector_count; ++i) 
+    {
+      if ((i % 5) == 0)
+	printf ("\n   ");
+      printf (" %08lX%s",
+	      info->start[i],
+	      info->protect[i] ? " (RO)" : "     "
+	      );
+    }
+  printf ("\n");
+
+  return;
+}
+
+/*-----------------------------------------------------------------------
+ */
+
+
+/*-----------------------------------------------------------------------
+ */
+
+/*
+ * The following code cannot be run from FLASH!
+ */
+
+static ulong 
+flash_get_size (volatile unsigned char *addr, 
+                flash_info_t           *info)
+{
+  short i;
+  uchar value;
+  ulong base = (ulong)addr;
+
+  /* Write auto select command: read Manufacturer ID */
+  addr[0x0555] = 0xAA;
+  addr[0x02AA] = 0x55;
+  addr[0x0555] = 0x90;
+  
+  value = addr[0];
+
+  switch ( value ) 
+    {
+      /*    case AMD_MANUFACT: */
+    case 0x01:
+      info->flash_id = FLASH_MAN_AMD;
+      break;
+      /*    case FUJ_MANUFACT: */
+    case 0x04:
+      info->flash_id = FLASH_MAN_FUJ;
+      break;
+      /*    case STM_MANUFACT: */
+    case 0x20:
+      info->flash_id = FLASH_MAN_STM;
+      break;
+
+    default:
+      info->flash_id = FLASH_UNKNOWN;
+      info->sector_count = 0;
+      info->size = 0;
+      return (0);			/* no or unknown flash	*/
+    }
+  
+  value = addr[1];			/* device ID		*/
+  
+  switch ( value ) 
+    {
+    case STM_ID_F040B:
+    case AMD_ID_F040B:
+      info->flash_id += FLASH_AM040;    /* 4 Mbits = 512k * 8  */
+      info->sector_count = 8;
+      info->size = 0x00080000;
+      break;
+
+    default:
+      info->flash_id = FLASH_UNKNOWN;
+      return (0);			/* => no or unknown flash */
+    }
+
+  /* set up sector start adress table */
+  for (i = 0; i < info->sector_count; i++) 
+    {
+      info->start[i] = base + (i * 0x00010000);
+    }
+  
+  /* check for protected sectors */
+  for (i = 0; i < info->sector_count; i++) 
+    {
+      /* read sector protection at sector address, (A7 .. A0) = 0x02 */
+      /* D0 = 1 if protected */
+      addr = (volatile unsigned char *)(info->start[i]);
+      info->protect[i] = addr[2] & 1;
+    }
+
+  /*
+   * Prevent writes to uninitialized FLASH.
+   */
+  if ( info->flash_id != FLASH_UNKNOWN ) 
+    {
+      addr = (volatile unsigned char *)info->start[0];
+      
+      *addr = 0xF0;	/* reset bank */
+    }
+  
+  return (info->size);
+}
+
+
+/*-----------------------------------------------------------------------
+ */
+
+int
+flash_erase (flash_info_t  *info, 
+	     int            s_first, 
+	     int            s_last)
+{
+  volatile unsigned char *addr = (volatile unsigned char *)(info->start[0]);
+  int flag, prot, sect, l_sect;
+  ulong start, now, last;
+  
+  if ( (s_first < 0) || (s_first > s_last) ) 
+    {
+      if ( info->flash_id == FLASH_UNKNOWN ) 
+	{
+	  printf ("- missing\n");
+	} 
+      else 
+	{
+	  printf ("- no sectors to erase\n");
+	}
+      return ( 1 );
+    }
+
+  if ( (info->flash_id == FLASH_UNKNOWN) ||
+       (info->flash_id > FLASH_AMD_COMP) ) 
+    {
+      printf ("Can't erase unknown flash type %08lx - aborted\n",
+	      info->flash_id);
+      return ( 1 );
+    }
+  
+  prot = 0;
+  for (sect=s_first; sect<=s_last; ++sect) 
+    {
+      if ( info->protect[sect] ) 
+	{
+	  prot++;
+	}
+    }
+  
+  if ( prot ) 
+    {
+      printf ("- Warning: %d protected sectors will not be erased!\n", prot);
+    } 
+  else 
+    {
+      printf ("\n");
+    }
+  
+  l_sect = -1;
+  
+  /* Disable interrupts which might cause a timeout here */
+  flag = disable_interrupts();
+  
+  addr[0x0555] = 0xAA;
+  addr[0x02AA] = 0x55;
+  addr[0x0555] = 0x80;
+  addr[0x0555] = 0xAA;
+  addr[0x02AA] = 0x55;
+  
+  /* Start erase on unprotected sectors */
+  for (sect = s_first; sect<=s_last; sect++) 
+    {
+      if (info->protect[sect] == 0)    /* not protected */
+	{
+	  addr = (volatile unsigned char *)(info->start[sect]);
+	  addr[0] = 0x30;
+	  l_sect = sect;
+	}
+    }
+  
+  /* re-enable interrupts if necessary */
+  if ( flag )
+    enable_interrupts();
+  
+  /* wait at least 80us - let's wait 1 ms */
+  udelay (1000);
+  
+  /*
+   * We wait for the last triggered sector
+   */
+  if ( l_sect < 0 )
+    goto DONE;
+  
+  start = get_timer (0);
+  last  = start;
+  addr = (volatile unsigned char *)(info->start[l_sect]);
+  while ( (addr[0] & 0x80) != 0x80 ) 
+    {
+      if ( (now = get_timer(start)) > CFG_FLASH_ERASE_TOUT ) 
+	{
+	  printf ("Timeout\n");
+	  return ( 1 );
+	}
+      /* show that we're waiting */
+      if ( (now - last) > 1000 )     /* every second */
+	{
+	  putc ('.');
+	  last = now;
+	}
+    }
+  
+DONE:
+  /* reset to read mode */
+  addr = (volatile unsigned char *)info->start[0];
+  addr[0] = 0xF0;	/* reset bank */
+  
+  printf (" done\n");
+  
+  return ( 0 );
+}
+
+/*-----------------------------------------------------------------------
+ * Copy memory to flash, returns:
+ * 0 - OK
+ * 1 - write timeout
+ * 2 - Flash not erased
+ */
+
+int 
+write_buff (flash_info_t  *info, 
+	    uchar         *src, 
+	    ulong          addr, 
+	    ulong          cnt)
+{
+  ulong cp, wp, data;
+  uchar bdata;
+  int i, l, rc;
+
+  if ( (info->flash_id & FLASH_TYPEMASK) == FLASH_AM040 )
+    {
+      /* Width of the data bus: 8 bits */
+
+      wp = addr;
+      
+      while ( cnt )
+	{
+	  bdata = *src++;
+	  
+	  if ( (rc = write_byte(info, wp, bdata)) != 0 )
+	    {
+	      return (rc);
+	    }
+	  
+	  ++wp;
+	  --cnt;
+	}
+
+      return ( 0 );
+    }
+  else
+    {
+      /* Width of the data bus: 32 bits */
+
+      wp = (addr & ~3);	/* get lower word aligned address */
+      
+      /*
+       * handle unaligned start bytes
+       */
+      if ( (l = addr - wp) != 0 ) 
+	{
+	  data = 0;
+	  for (i=0, cp=wp; i<l; ++i, ++cp) 
+	    {
+	      data = (data << 8) | (*(uchar *)cp);
+	    }
+	  for (; i<4 && cnt>0; ++i) 
+	    {
+	      data = (data << 8) | *src++;
+	      --cnt;
+	      ++cp;
+	    }
+	  for (; cnt==0 && i<4; ++i, ++cp) 
+	    {
+	      data = (data << 8) | (*(uchar *)cp);
+	    }
+	  
+	  if ( (rc = write_word(info, wp, data)) != 0 ) 
+	    {
+	      return (rc);
+	    }
+	  wp += 4;
+	}
+      
+      /*
+       * handle word aligned part
+       */
+      while ( cnt >= 4 ) 
+	{
+	  data = 0;
+	  for (i=0; i<4; ++i) 
+	    {
+	      data = (data << 8) | *src++;
+	    }
+	  if ( (rc = write_word(info, wp, data)) != 0 ) 
+	    {
+	      return (rc);
+	    }
+	  wp  += 4;
+	  cnt -= 4;
+	}
+      
+      if ( cnt == 0 ) 
+	{
+	  return (0);
+	}
+      
+      /*
+       * handle unaligned tail bytes
+       */
+      data = 0;
+      for (i=0, cp=wp; i<4 && cnt>0; ++i, ++cp) 
+	{
+	  data = (data << 8) | *src++;
+	  --cnt;
+	}
+      for (; i<4; ++i, ++cp) 
+	{
+	  data = (data << 8) | (*(uchar *)cp);
+	}
+      
+      return (write_word(info, wp, data));
+    }
+}
+
+/*-----------------------------------------------------------------------
+ * Write a word to Flash, returns:
+ * 0 - OK
+ * 1 - write timeout
+ * 2 - Flash not erased
+ */
+static int 
+write_word (flash_info_t  *info, 
+	    ulong          dest, 
+	    ulong          data)
+{
+  vu_long *addr = (vu_long*)(info->start[0]);
+  ulong start;
+  int flag;
+  
+  /* Check if Flash is (sufficiently) erased */
+  if ( (*((vu_long *)dest) & data) != data ) 
+    {
+      return (2);
+    }
+  /* Disable interrupts which might cause a timeout here */
+  flag = disable_interrupts();
+  
+  addr[0x0555] = 0x00AA00AA;
+  addr[0x02AA] = 0x00550055;
+  addr[0x0555] = 0x00A000A0;
+  
+  *((vu_long *)dest) = data;
+  
+  /* re-enable interrupts if necessary */
+  if ( flag )
+    enable_interrupts();
+
+  /* data polling for D7 */
+  start = get_timer (0);
+  while ( (*((vu_long *)dest) & 0x00800080) != (data & 0x00800080) ) 
+    {
+      if ( get_timer(start) > CFG_FLASH_WRITE_TOUT ) 
+	{
+	  return (1);
+	}
+    }
+
+  return (0);
+}
+
+/*-----------------------------------------------------------------------
+ * Write a byte to Flash, returns:
+ * 0 - OK
+ * 1 - write timeout
+ * 2 - Flash not erased
+ */
+static int 
+write_byte (flash_info_t  *info, 
+	    ulong          dest, 
+	    uchar          data)
+{
+  volatile unsigned char *addr = (volatile unsigned char *)(info->start[0]);
+  ulong  start;
+  int    flag;
+  
+  /* Check if Flash is (sufficiently) erased */
+  if ( (*((volatile unsigned char *)dest) & data) != data ) 
+    {
+      return (2);
+    }
+  /* Disable interrupts which might cause a timeout here */
+  flag = disable_interrupts();
+  
+  addr[0x0555] = 0xAA;
+  addr[0x02AA] = 0x55;
+  addr[0x0555] = 0xA0;
+  
+  *((volatile unsigned char *)dest) = data;
+  
+  /* re-enable interrupts if necessary */
+  if ( flag )
+    enable_interrupts();
+
+  /* data polling for D7 */
+  start = get_timer (0);
+  while ( (*((volatile unsigned char *)dest) & 0x80) != (data & 0x80) ) 
+    {
+      if ( get_timer(start) > CFG_FLASH_WRITE_TOUT ) 
+	{
+	  return (1);
+	}
+    }
+
+  return (0);
+}
+
+/*-----------------------------------------------------------------------
+ */
diff --git a/board/LEOX/elpt860/u-boot.lds b/board/LEOX/elpt860/u-boot.lds
new file mode 100644
index 0000000000..77945d0dd2
--- /dev/null
+++ b/board/LEOX/elpt860/u-boot.lds
@@ -0,0 +1,146 @@
+/*
+**=====================================================================
+**
+** Copyright (C) 2000, 2001, 2002, 2003
+** The LEOX team <team@leox.org>, http://www.leox.org
+**
+** LEOX.org is about the development of free hardware and software resources
+**   for system on chip.
+**
+** Description: U-Boot port on the LEOX's ELPT860 CPU board
+** ~~~~~~~~~~~
+**
+**=====================================================================
+**
+** This program is free software; you can redistribute it and/or
+** modify it under the terms of the GNU General Public License as
+** published by the Free Software Foundation; either version 2 of
+** the License, or (at your option) any later version.
+**
+** This program is distributed in the hope that it will be useful,
+** but WITHOUT ANY WARRANTY; without even the implied warranty of
+** MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+** GNU General Public License for more details.
+**
+** You should have received a copy of the GNU General Public License
+** along with this program; if not, write to the Free Software
+** Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+** MA 02111-1307 USA
+**
+**=====================================================================
+*/
+
+OUTPUT_ARCH(powerpc)
+SEARCH_DIR(/lib); SEARCH_DIR(/usr/lib); SEARCH_DIR(/usr/local/lib); SEARCH_DIR(/usr/local/powerpc-any-elf/lib);
+/* Do we need any of these for elf?
+   __DYNAMIC = 0;    */
+SECTIONS
+{
+  /* Read-only sections, merged into text segment: */
+  . = + SIZEOF_HEADERS;
+  .interp : { *(.interp) }
+  .hash          : { *(.hash)		}
+  .dynsym        : { *(.dynsym)		}
+  .dynstr        : { *(.dynstr)		}
+  .rel.text      : { *(.rel.text)		}
+  .rela.text     : { *(.rela.text) 	}
+  .rel.data      : { *(.rel.data)		}
+  .rela.data     : { *(.rela.data) 	}
+  .rel.rodata    : { *(.rel.rodata) 	}
+  .rela.rodata   : { *(.rela.rodata) 	}
+  .rel.got       : { *(.rel.got)		}
+  .rela.got      : { *(.rela.got)		}
+  .rel.ctors     : { *(.rel.ctors)	}
+  .rela.ctors    : { *(.rela.ctors)	}
+  .rel.dtors     : { *(.rel.dtors)	}
+  .rela.dtors    : { *(.rela.dtors)	}
+  .rel.bss       : { *(.rel.bss)		}
+  .rela.bss      : { *(.rela.bss)		}
+  .rel.plt       : { *(.rel.plt)		}
+  .rela.plt      : { *(.rela.plt)		}
+  .init          : { *(.init)	}
+  .plt : { *(.plt) }
+  .text      :
+  {
+    /* WARNING - the following is hand-optimized to fit within	*/
+    /* the sector layout of our flash chips!	XXX FIXME XXX	*/
+
+    cpu/mpc8xx/start.o			(.text)
+    common/dlmalloc.o			(.text)
+    lib_ppc/ppcstring.o			(.text)
+    lib_generic/vsprintf.o		(.text)
+    lib_generic/crc32.o			(.text)
+    lib_generic/zlib.o			(.text)
+    lib_generic/string.o		(.text)
+    lib_ppc/cache.o			(.text)
+    lib_ppc/extable.o			(.text)
+    lib_ppc/time.o			(.text)
+    lib_ppc/ticks.o			(.text)
+
+    . = env_offset;
+    common/environment.o		(.text)
+
+    *(.text)
+    *(.fixup)
+    *(.got1)
+  }
+  _etext = .;
+  PROVIDE (etext = .);
+  .rodata    :
+  {
+    *(.rodata)
+    *(.rodata1)
+  }
+  .fini      : { *(.fini)    } =0
+  .ctors     : { *(.ctors)   }
+  .dtors     : { *(.dtors)   }
+
+  /* Read-write section, merged into data segment: */
+  . = (. + 0x00FF) & 0xFFFFFF00;
+  _erotext = .;
+  PROVIDE (erotext = .);
+  .reloc   :
+  {
+    *(.got)
+    _GOT2_TABLE_ = .;
+    *(.got2)
+    _FIXUP_TABLE_ = .;
+    *(.fixup)
+  }
+  __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2;
+  __fixup_entries = (. - _FIXUP_TABLE_)>>2;
+
+  .data    :
+  {
+    *(.data)
+    *(.data1)
+    *(.sdata)
+    *(.sdata2)
+    *(.dynamic)
+    CONSTRUCTORS
+  }
+  _edata  =  .;
+  PROVIDE (edata = .);
+
+  __start___ex_table = .;
+  __ex_table : { *(__ex_table) }
+  __stop___ex_table = .;
+
+  . = ALIGN(256);
+  __init_begin = .;
+  .text.init : { *(.text.init) }
+  .data.init : { *(.data.init) }
+  . = ALIGN(256);
+  __init_end = .;
+
+  __bss_start = .;
+  .bss       :
+  {
+   *(.sbss) *(.scommon)
+   *(.dynbss)
+   *(.bss)
+   *(COMMON)
+  }
+  _end = . ;
+  PROVIDE (end = .);
+}
diff --git a/board/LEOX/elpt860/u-boot.lds.debug b/board/LEOX/elpt860/u-boot.lds.debug
new file mode 100644
index 0000000000..b81235fd4b
--- /dev/null
+++ b/board/LEOX/elpt860/u-boot.lds.debug
@@ -0,0 +1,140 @@
+/*
+**=====================================================================
+**
+** Copyright (C) 2000, 2001, 2002, 2003
+** The LEOX team <team@leox.org>, http://www.leox.org
+**
+** LEOX.org is about the development of free hardware and software resources
+**   for system on chip.
+**
+** Description: U-Boot port on the LEOX's ELPT860 CPU board
+** ~~~~~~~~~~~
+**
+**=====================================================================
+**
+** This program is free software; you can redistribute it and/or
+** modify it under the terms of the GNU General Public License as
+** published by the Free Software Foundation; either version 2 of
+** the License, or (at your option) any later version.
+**
+** This program is distributed in the hope that it will be useful,
+** but WITHOUT ANY WARRANTY; without even the implied warranty of
+** MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+** GNU General Public License for more details.
+**
+** You should have received a copy of the GNU General Public License
+** along with this program; if not, write to the Free Software
+** Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+** MA 02111-1307 USA
+**
+**=====================================================================
+*/
+
+OUTPUT_ARCH(powerpc)
+SEARCH_DIR(/lib); SEARCH_DIR(/usr/lib); SEARCH_DIR(/usr/local/lib); SEARCH_DIR(/usr/local/powerpc-any-elf/lib);
+/* Do we need any of these for elf?
+   __DYNAMIC = 0;    */
+SECTIONS
+{
+  /* Read-only sections, merged into text segment: */
+  . = + SIZEOF_HEADERS;
+  .interp : { *(.interp) }
+  .hash          : { *(.hash)		}
+  .dynsym        : { *(.dynsym)		}
+  .dynstr        : { *(.dynstr)		}
+  .rel.text      : { *(.rel.text)		}
+  .rela.text     : { *(.rela.text) 	}
+  .rel.data      : { *(.rel.data)		}
+  .rela.data     : { *(.rela.data) 	}
+  .rel.rodata    : { *(.rel.rodata) 	}
+  .rela.rodata   : { *(.rela.rodata) 	}
+  .rel.got       : { *(.rel.got)		}
+  .rela.got      : { *(.rela.got)		}
+  .rel.ctors     : { *(.rel.ctors)	}
+  .rela.ctors    : { *(.rela.ctors)	}
+  .rel.dtors     : { *(.rel.dtors)	}
+  .rela.dtors    : { *(.rela.dtors)	}
+  .rel.bss       : { *(.rel.bss)		}
+  .rela.bss      : { *(.rela.bss)		}
+  .rel.plt       : { *(.rel.plt)		}
+  .rela.plt      : { *(.rela.plt)		}
+  .init          : { *(.init)	}
+  .plt : { *(.plt) }
+  .text      :
+  {
+    /* WARNING - the following is hand-optimized to fit within	*/
+    /* the sector layout of our flash chips!	XXX FIXME XXX	*/
+
+    cpu/mpc8xx/start.o		(.text)
+    common/dlmalloc.o		(.text)
+    lib_generic/vsprintf.o	(.text)
+    lib_generic/crc32.o		(.text)
+
+    . = env_offset;
+    common/environment.o	(.text)
+
+    *(.text)
+    *(.fixup)
+    *(.got1)
+  }
+  _etext = .;
+  PROVIDE (etext = .);
+  .rodata    :
+  {
+    *(.rodata)
+    *(.rodata1)
+  }
+  .fini      : { *(.fini)    } =0
+  .ctors     : { *(.ctors)   }
+  .dtors     : { *(.dtors)   }
+
+  /* Read-write section, merged into data segment: */
+  . = (. + 0x0FFF) & 0xFFFFF000;
+  _erotext = .;
+  PROVIDE (erotext = .);
+  .reloc   :
+  {
+    *(.got)
+    _GOT2_TABLE_ = .;
+    *(.got2)
+    _FIXUP_TABLE_ = .;
+    *(.fixup)
+  }
+  __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2;
+  __fixup_entries = (. - _FIXUP_TABLE_)>>2;
+
+  .data    :
+  {
+    *(.data)
+    *(.data1)
+    *(.sdata)
+    *(.sdata2)
+    *(.dynamic)
+    CONSTRUCTORS
+  }
+  _edata  =  .;
+  PROVIDE (edata = .);
+
+  __start___ex_table = .;
+  __ex_table : { *(__ex_table) }
+  __stop___ex_table = .;
+
+  . = ALIGN(4096);
+  __init_begin = .;
+  .text.init : { *(.text.init) }
+  .data.init : { *(.data.init) }
+  . = ALIGN(4096);
+  __init_end = .;
+
+  __bss_start = .;
+  .bss       :
+  {
+   *(.sbss) *(.scommon)
+   *(.dynbss)
+   *(.bss)
+   *(COMMON)
+  }
+  _end = . ;
+  PROVIDE (end = .);
+}
+
diff --git a/board/cpc45/Makefile b/board/cpc45/Makefile
new file mode 100644
index 0000000000..cc66e32e2f
--- /dev/null
+++ b/board/cpc45/Makefile
@@ -0,0 +1,40 @@
+#
+# (C) Copyright 2001-2003
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB	= lib$(BOARD).a
+
+OBJS	= $(BOARD).o flash.o plx9030.o
+
+$(LIB):	.depend $(OBJS)
+	$(AR) crv $@ $^
+
+#########################################################################
+
+.depend:	Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
+		$(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+
+sinclude .depend
+
+#########################################################################
diff --git a/board/cpc45/config.mk b/board/cpc45/config.mk
new file mode 100644
index 0000000000..bf9d9debc6
--- /dev/null
+++ b/board/cpc45/config.mk
@@ -0,0 +1,36 @@
+#
+# (C) Copyright 2001-2003
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+#
+# CPC45 board
+#
+
+
+ifeq ($(CONFIG_BOOT_ROM),y)
+	TEXT_BASE := 0xFFF00000
+	PLATFORM_CPPFLAGS += -DCONFIG_BOOT_ROM
+else
+	TEXT_BASE := 0xFFF00000
+endif
+
+PLATFORM_CPPFLAGS += -DTEXT_BASE=$(TEXT_BASE) -I$(TOPDIR)
diff --git a/board/cpc45/cpc45.c b/board/cpc45/cpc45.c
new file mode 100644
index 0000000000..01067f53e6
--- /dev/null
+++ b/board/cpc45/cpc45.c
@@ -0,0 +1,173 @@
+/*
+ * (C) Copyright 2001
+ * Rob Taylor, Flying Pig Systems. robt@flyingpig.com.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <mpc824x.h>
+#include <asm/processor.h>
+#include <pci.h>
+
+int sysControlDisplay(int digit, uchar ascii_code);			
+extern void Plx9030Init(void);
+
+	/* We have to clear the initial data area here. Couldn't have done it
+	 * earlier because DRAM had not been initialized.
+	 */
+int board_pre_init(void)
+{
+
+	/* enable DUAL UART Mode on CPC45 */
+	*(uchar*)DUART_DCR |= 0x1;	/* set DCM bit */
+
+	return 0;
+}
+
+int checkboard(void)
+{
+/*
+	char  revision = BOARD_REV;
+*/
+	ulong busfreq  = get_bus_freq(0);
+	char  buf[32];
+
+	printf("CPC45 ");
+/*
+	printf("Revision %d ", revision);
+*/
+	printf("Local Bus at %s MHz\n", strmhz(buf, busfreq));
+
+	return 0;
+}
+
+long int initdram(int board_type)
+{
+	int              i, cnt;
+	volatile uchar * base      = CFG_SDRAM_BASE;
+	volatile ulong * addr;
+	ulong            save[32];
+	ulong            val, ret  = 0;
+
+	for (i=0, cnt=(CFG_MAX_RAM_SIZE / sizeof(long)) >> 1; cnt > 0; cnt >>= 1) {
+
+		addr = (volatile ulong *)base + cnt;
+		save[i++] = *addr;
+		*addr = ~cnt;
+	}
+
+	addr = (volatile ulong *)base;
+	save[i] = *addr;
+	*addr = 0;
+
+	if (*addr != 0) {
+		*addr = save[i];
+		goto Done;
+	}
+
+	for (cnt = 1; cnt <= CFG_MAX_RAM_SIZE / sizeof(long); cnt <<= 1) {
+		addr = (volatile ulong *)base + cnt;
+		val = *addr;
+		*addr = save[--i];
+		if (val != ~cnt) {
+			ulong new_bank0_end = cnt * sizeof(long) - 1;
+			ulong mear1  = mpc824x_mpc107_getreg(MEAR1);
+			ulong emear1 = mpc824x_mpc107_getreg(EMEAR1);
+			mear1 =  (mear1  & 0xFFFFFF00) |
+			  ((new_bank0_end & MICR_ADDR_MASK) >> MICR_ADDR_SHIFT);
+			emear1 = (emear1 & 0xFFFFFF00) |
+			  ((new_bank0_end & MICR_ADDR_MASK) >> MICR_EADDR_SHIFT);
+			mpc824x_mpc107_setreg(MEAR1,  mear1);
+			mpc824x_mpc107_setreg(EMEAR1, emear1);
+
+			ret = cnt * sizeof(long);
+			goto Done;
+		}
+	}
+
+	ret = CFG_MAX_RAM_SIZE;
+Done:
+	return ret;
+}
+
+/*
+ * Initialize PCI Devices, report devices found.
+ */
+#ifndef CONFIG_PCI_PNP
+
+static struct pci_config_table pci_sandpoint_config_table[] = {
+	{ PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, 0x0f, PCI_ANY_ID,
+	  pci_cfgfunc_config_device, { PCI_ENET0_IOADDR,
+				       PCI_ENET0_MEMADDR,
+				       PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER }},
+	{ }
+};
+#endif
+
+
+struct pci_controller hose = {
+#ifndef CONFIG_PCI_PNP
+	config_table: pci_sandpoint_config_table,
+#endif
+};
+
+void pci_init_board(void)
+{
+	pci_mpc824x_init(&hose);
+
+	/* init PCI_to_LOCAL Bus BRIDGE */
+	Plx9030Init();
+
+	sysControlDisplay(0,' ');
+	sysControlDisplay(1,'C');
+	sysControlDisplay(2,'P');
+	sysControlDisplay(3,'C');
+	sysControlDisplay(4,' ');
+	sysControlDisplay(5,'4');
+	sysControlDisplay(6,'5');
+	sysControlDisplay(7,' ');
+
+}
+
+/**************************************************************************
+*
+* sysControlDisplay - controls one of the Alphanum. Display digits.
+*
+* This routine will write an ASCII character to the display digit requested.
+*
+* SEE ALSO:
+*
+* RETURNS: NA
+*/
+
+int sysControlDisplay
+    (
+    int digit, 			/* number of digit 0..7 */
+    uchar ascii_code		/* ASCII code */
+    )
+{
+	if ((digit < 0) || (digit > 7))
+		return (-1);
+
+	*((volatile uchar*)(DISP_CHR_RAM + digit)) = ascii_code;
+
+	return (0);
+}
+
diff --git a/board/cpc45/flash.c b/board/cpc45/flash.c
new file mode 100644
index 0000000000..6e81b9c335
--- /dev/null
+++ b/board/cpc45/flash.c
@@ -0,0 +1,493 @@
+/*
+ * (C) Copyright 2001-2003
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <mpc824x.h>
+#include <asm/processor.h>
+
+#if defined(CFG_ENV_IS_IN_FLASH)
+# ifndef  CFG_ENV_ADDR
+#  define CFG_ENV_ADDR	(CFG_FLASH_BASE + CFG_ENV_OFFSET)
+# endif
+# ifndef  CFG_ENV_SIZE
+#  define CFG_ENV_SIZE	CFG_ENV_SECT_SIZE
+# endif
+# ifndef  CFG_ENV_SECT_SIZE
+#  define CFG_ENV_SECT_SIZE  CFG_ENV_SIZE
+# endif
+#endif
+
+#define FLASH_BANK_SIZE 0x800000
+#define MAIN_SECT_SIZE  0x40000
+#define PARAM_SECT_SIZE 0x8000
+
+flash_info_t    flash_info[CFG_MAX_FLASH_BANKS];
+
+static int write_data (flash_info_t *info, ulong dest, ulong *data);
+static void write_via_fpu(vu_long *addr, ulong *data);
+static __inline__ unsigned long get_msr(void);
+static __inline__ void set_msr(unsigned long msr);
+
+/*---------------------------------------------------------------------*/
+#undef	DEBUG_FLASH
+
+/*---------------------------------------------------------------------*/
+#ifdef DEBUG_FLASH
+#define DEBUGF(fmt,args...) printf(fmt ,##args)
+#else
+#define DEBUGF(fmt,args...)
+#endif
+/*---------------------------------------------------------------------*/
+
+/*-----------------------------------------------------------------------
+ */
+
+unsigned long flash_init(void)
+{
+    int i, j;
+    ulong size = 0;
+    uchar tempChar;
+
+   /* Enable flash writes on CPC45 */
+
+    tempChar = BOARD_CTRL;
+
+    tempChar |= (B_CTRL_FWPT_1 | B_CTRL_FWRE_1);
+
+    tempChar &= ~(B_CTRL_FWPT_0 | B_CTRL_FWRE_0);
+
+    BOARD_CTRL = tempChar;
+
+
+    for (i = 0; i < CFG_MAX_FLASH_BANKS; i++) {
+    	vu_long *addr = (vu_long *)(CFG_FLASH_BASE + i * FLASH_BANK_SIZE);
+
+	addr[0] = 0x00900090;
+
+	DEBUGF ("Flash bank # %d:\n"
+		"\tManuf. ID @ 0x%08lX: 0x%08lX\n"
+		"\tDevice ID @ 0x%08lX: 0x%08lX\n",
+		i,
+		(ulong)(&addr[0]), addr[0],
+		(ulong)(&addr[2]), addr[2]);
+
+
+	if ((addr[0] == addr[1]) && (addr[0] == INTEL_MANUFACT) &&
+	    (addr[2] == addr[3]) && (addr[2] == INTEL_ID_28F160F3T))
+	{
+
+	    flash_info[i].flash_id = (FLASH_MAN_INTEL & FLASH_VENDMASK) |
+	    			     (INTEL_ID_28F160F3T & FLASH_TYPEMASK);
+
+	} else {
+	    flash_info[i].flash_id = FLASH_UNKNOWN;
+	    addr[0] = 0xFFFFFFFF;
+	    goto Done;
+	}
+
+	DEBUGF ("flash_id = 0x%08lX\n", flash_info[i].flash_id);
+
+	addr[0] = 0xFFFFFFFF;
+
+	flash_info[i].size = FLASH_BANK_SIZE;
+	flash_info[i].sector_count = CFG_MAX_FLASH_SECT;
+	memset(flash_info[i].protect, 0, CFG_MAX_FLASH_SECT);
+	for (j = 0; j < flash_info[i].sector_count; j++) {
+		if (j > 30) {
+			flash_info[i].start[j] = CFG_FLASH_BASE +
+			                         i * FLASH_BANK_SIZE +
+			                         (MAIN_SECT_SIZE * 31) + (j - 31) * PARAM_SECT_SIZE;
+		} else {
+			flash_info[i].start[j] = CFG_FLASH_BASE +
+			                         i * FLASH_BANK_SIZE +
+			                         j * MAIN_SECT_SIZE;
+		}
+	}
+	size += flash_info[i].size;
+    }
+
+    /* Protect monitor and environment sectors
+     */
+#if CFG_MONITOR_BASE >= CFG_FLASH_BASE
+#if CFG_MONITOR_BASE >= CFG_FLASH_BASE + FLASH_BANK_SIZE
+    flash_protect(FLAG_PROTECT_SET,
+              CFG_MONITOR_BASE,
+              CFG_MONITOR_BASE + CFG_MONITOR_LEN - 1,
+              &flash_info[1]);
+#else
+    flash_protect(FLAG_PROTECT_SET,
+              CFG_MONITOR_BASE,
+              CFG_MONITOR_BASE + CFG_MONITOR_LEN - 1,
+              &flash_info[0]);
+#endif
+#endif
+
+#if (CFG_ENV_IS_IN_FLASH == 1) && defined(CFG_ENV_ADDR)
+#if CFG_ENV_ADDR >= CFG_FLASH_BASE + FLASH_BANK_SIZE
+    flash_protect(FLAG_PROTECT_SET,
+              CFG_ENV_ADDR,
+              CFG_ENV_ADDR + CFG_ENV_SIZE - 1,
+              &flash_info[1]);
+#else
+    flash_protect(FLAG_PROTECT_SET,
+              CFG_ENV_ADDR,
+              CFG_ENV_ADDR + CFG_ENV_SIZE - 1,
+              &flash_info[0]);
+#endif
+#endif
+
+Done:
+    return size;
+}
+
+/*-----------------------------------------------------------------------
+ */
+void flash_print_info (flash_info_t * info)
+{
+	int i;
+
+	switch ((i = info->flash_id & FLASH_VENDMASK)) {
+	case (FLASH_MAN_INTEL & FLASH_VENDMASK):
+		printf ("Intel: ");
+		break;
+	default:
+		printf ("Unknown Vendor 0x%04x ", i);
+		break;
+	}
+
+	switch ((i = info->flash_id & FLASH_TYPEMASK)) {
+	case (INTEL_ID_28F160F3T & FLASH_TYPEMASK):
+		printf ("28F160F3T (16Mbit)\n");
+		break;
+	default:
+		printf ("Unknown Chip Type 0x%04x\n", i);
+		goto Done;
+		break;
+	}
+
+	printf ("  Size: %ld MB in %d Sectors\n",
+			info->size >> 20, info->sector_count);
+
+	printf ("  Sector Start Addresses:");
+	for (i = 0; i < info->sector_count; i++) {
+		if ((i % 5) == 0) {
+			printf ("\n   ");
+		}
+		printf (" %08lX%s", info->start[i],
+				info->protect[i] ? " (RO)" : "     ");
+	}
+	printf ("\n");
+
+Done:
+	return;
+}
+
+/*-----------------------------------------------------------------------
+ */
+
+int	flash_erase (flash_info_t *info, int s_first, int s_last)
+{
+	int flag, prot, sect;
+	ulong start, now, last;
+
+	DEBUGF ("Erase flash bank %d sect %d ... %d\n",
+		info - &flash_info[0], s_first, s_last);
+
+	if ((s_first < 0) || (s_first > s_last)) {
+		if (info->flash_id == FLASH_UNKNOWN) {
+			printf ("- missing\n");
+		} else {
+			printf ("- no sectors to erase\n");
+		}
+		return 1;
+	}
+
+	if ((info->flash_id & FLASH_VENDMASK) !=
+	    (FLASH_MAN_INTEL & FLASH_VENDMASK)) {
+		printf ("Can erase only Intel flash types - aborted\n");
+		return 1;
+	}
+
+	prot = 0;
+	for (sect=s_first; sect<=s_last; ++sect) {
+		if (info->protect[sect]) {
+			prot++;
+		}
+	}
+
+	if (prot) {
+		printf ("- Warning: %d protected sectors will not be erased!\n",
+			prot);
+	} else {
+		printf ("\n");
+	}
+
+	start = get_timer (0);
+	last  = start;
+	/* Start erase on unprotected sectors */
+	for (sect = s_first; sect<=s_last; sect++) {
+		if (info->protect[sect] == 0) {	/* not protected */
+			vu_long *addr = (vu_long *)(info->start[sect]);
+
+			DEBUGF ("Erase sect %d @ 0x%08lX\n",
+				sect, (ulong)addr);
+
+			/* Disable interrupts which might cause a timeout
+			 * here.
+			 */
+			flag = disable_interrupts();
+
+			addr[0] = 0x00500050;	/* clear status register */
+			addr[0] = 0x00200020;	/* erase setup */
+			addr[0] = 0x00D000D0;	/* erase confirm */
+
+			addr[1] = 0x00500050;	/* clear status register */
+			addr[1] = 0x00200020;	/* erase setup */
+			addr[1] = 0x00D000D0;	/* erase confirm */
+
+			/* re-enable interrupts if necessary */
+			if (flag)
+				enable_interrupts();
+
+			/* wait at least 80us - let's wait 1 ms */
+			udelay (1000);
+
+			while (((addr[0] & 0x00800080) != 0x00800080) ||
+			       ((addr[1] & 0x00800080) != 0x00800080) ) {
+				if ((now=get_timer(start)) >
+				           CFG_FLASH_ERASE_TOUT) {
+					printf ("Timeout\n");
+					addr[0] = 0x00B000B0; /* suspend erase */
+					addr[0] = 0x00FF00FF; /* to read mode  */
+					return 1;
+				}
+
+				/* show that we're waiting */
+				if ((now - last) > 1000) {  /* every second  */
+					putc ('.');
+					last = now;
+				}
+			}
+
+			addr[0] = 0x00FF00FF;
+		}
+	}
+	printf (" done\n");
+	return 0;
+}
+
+/*-----------------------------------------------------------------------
+ * Copy memory to flash, returns:
+ * 0 - OK
+ * 1 - write timeout
+ * 2 - Flash not erased
+ * 4 - Flash not identified
+ */
+
+#define	FLASH_WIDTH	8	/* flash bus width in bytes */
+
+int write_buff (flash_info_t *info, uchar *src, ulong addr, ulong cnt)
+{
+	ulong wp, cp, msr;
+	int l, rc, i;
+	ulong data[2];
+	ulong *datah = &data[0];
+	ulong *datal = &data[1];
+
+	DEBUGF ("Flash write_buff: @ 0x%08lx, src 0x%08lx len %ld\n",
+		addr, (ulong)src, cnt);
+
+	if (info->flash_id == FLASH_UNKNOWN) {
+		return 4;
+	}
+
+	msr = get_msr();
+	set_msr(msr | MSR_FP);
+
+	wp = (addr & ~(FLASH_WIDTH-1));	/* get lower aligned address */
+
+	/*
+	 * handle unaligned start bytes
+	 */
+	if ((l = addr - wp) != 0) {
+		*datah = *datal = 0;
+
+		for (i = 0, cp = wp; i < l; i++, cp++) {
+			if (i >= 4) {
+				*datah = (*datah << 8) |
+				                ((*datal & 0xFF000000) >> 24);
+			}
+
+			*datal = (*datal << 8) | (*(uchar *)cp);
+		}
+		for (; i < FLASH_WIDTH && cnt > 0; ++i) {
+			char tmp;
+
+			tmp = *src;
+
+			src++;
+
+			if (i >= 4) {
+				*datah = (*datah << 8) |
+			                        ((*datal & 0xFF000000) >> 24);
+			}
+
+			*datal = (*datal << 8) | tmp;
+
+			--cnt; ++cp;
+		}
+
+		for (; cnt == 0 && i < FLASH_WIDTH; ++i, ++cp) {
+			if (i >= 4) {
+				*datah = (*datah << 8) |
+				                ((*datal & 0xFF000000) >> 24);
+			}
+
+			*datal = (*datah << 8) | (*(uchar *)cp);
+		}
+
+		if ((rc = write_data(info, wp, data)) != 0) {
+			set_msr(msr);
+			return (rc);
+		}
+
+		wp += FLASH_WIDTH;
+	}
+
+	/*
+	 * handle FLASH_WIDTH aligned part
+	 */
+	while (cnt >= FLASH_WIDTH) {
+		*datah = *(ulong *)src;
+		*datal = *(ulong *)(src + 4);
+		if ((rc = write_data(info, wp, data)) != 0) {
+			set_msr(msr);
+			return (rc);
+		}
+		wp  += FLASH_WIDTH;
+		cnt -= FLASH_WIDTH;
+		src += FLASH_WIDTH;
+	}
+
+	if (cnt == 0) {
+		set_msr(msr);
+		return (0);
+	}
+
+	/*
+	 * handle unaligned tail bytes
+	 */
+	*datah = *datal = 0;
+	for (i = 0, cp = wp; i < FLASH_WIDTH && cnt > 0; ++i, ++cp) {
+		char tmp;
+
+      		tmp = *src;
+
+		src++;
+
+		if (i >= 4) {
+			*datah = (*datah << 8) | ((*datal & 0xFF000000) >> 24);
+		}
+
+		*datal = (*datal << 8) | tmp;
+
+		--cnt;
+	}
+
+	for (; i < FLASH_WIDTH; ++i, ++cp) {
+		if (i >= 4) {
+			*datah = (*datah << 8) | ((*datal & 0xFF000000) >> 24);
+		}
+
+		*datal = (*datal << 8) | (*(uchar *)cp);
+	}
+
+	rc = write_data(info, wp, data);
+	set_msr(msr);
+
+	return (rc);
+}
+
+/*-----------------------------------------------------------------------
+ * Write a word to Flash, returns:
+ * 0 - OK
+ * 1 - write timeout
+ * 2 - Flash not erased
+ */
+static int write_data (flash_info_t *info, ulong dest, ulong *data)
+{
+	vu_long *addr = (vu_long *)dest;
+	ulong start;
+	int flag;
+
+	/* Check if Flash is (sufficiently) erased */
+	if (((addr[0] & data[0]) != data[0]) ||
+	    ((addr[1] & data[1]) != data[1]) ) {
+		return (2);
+	}
+	/* Disable interrupts which might cause a timeout here */
+	flag = disable_interrupts();
+
+	addr[0] = 0x00400040;		/* write setup */
+	write_via_fpu(addr, data);
+
+	/* re-enable interrupts if necessary */
+	if (flag)
+		enable_interrupts();
+
+	start = get_timer (0);
+
+	while (((addr[0] & 0x00800080) != 0x00800080) ||
+	       ((addr[1] & 0x00800080) != 0x00800080) ) {
+		if (get_timer(start) > CFG_FLASH_WRITE_TOUT) {
+			addr[0] = 0x00FF00FF;	/* restore read mode */
+			return (1);
+		}
+	}
+
+	addr[0] = 0x00FF00FF;	/* restore read mode */
+
+	return (0);
+}
+
+/*-----------------------------------------------------------------------
+ */
+static void write_via_fpu(vu_long *addr, ulong *data)
+{
+	__asm__ __volatile__ ("lfd  1, 0(%0)" : : "r" (data));
+	__asm__ __volatile__ ("stfd 1, 0(%0)" : : "r" (addr));
+}
+/*-----------------------------------------------------------------------
+ */
+static __inline__ unsigned long get_msr(void)
+{
+    unsigned long msr;
+
+    __asm__ __volatile__ ("mfmsr %0" : "=r" (msr) :);
+    return msr;
+}
+
+static __inline__ void set_msr(unsigned long msr)
+{
+    __asm__ __volatile__ ("mtmsr %0" : : "r" (msr));
+}
diff --git a/board/cpc45/plx9030.c b/board/cpc45/plx9030.c
new file mode 100644
index 0000000000..e337bd200b
--- /dev/null
+++ b/board/cpc45/plx9030.c
@@ -0,0 +1,174 @@
+/* Plx9030.c - system configuration module for PLX9030 PCI to Local Bus Bridge */
+/*
+ * (C) Copyright 2002-2003
+ * Josef Wagner, MicroSys GmbH, wagner@microsys.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ *   Date       Modification                                      by
+ * -------      ----------------------------------------------    ---
+ * 30sep02      converted from VxWorks to LINUX                   wa
+*/
+
+
+/*
+DESCRIPTION
+
+This is the configuration module for the PLX9030 PCI to Local Bus Bridge.
+It configures the Chip select lines for SRAM (CS0), ST16C552 (CS1,CS2), Display and local
+registers (CS3) on CPC45.
+*/
+
+/* includes */
+
+#include <common.h>
+#include <malloc.h>
+#include <net.h>
+#include <asm/io.h>
+#include <pci.h>
+
+/* imports */
+
+
+/* defines */
+#define	PLX9030_VENDOR_ID	0x10B5
+#define	PLX9030_DEVICE_ID	0x9030
+
+#undef PLX_DEBUG
+
+/* PLX9030 register offsets  */
+#define	P9030_LAS0RR	0x00
+#define	P9030_LAS1RR 	0x04
+#define	P9030_LAS2RR	0x08
+#define	P9030_LAS3RR	0x0c
+#define	P9030_EROMRR	0x10
+#define	P9030_LAS0BA	0x14
+#define	P9030_LAS1BA	0x18
+#define	P9030_LAS2BA	0x1c
+#define	P9030_LAS3BA	0x20
+#define	P9030_EROMBA	0x24
+#define	P9030_LAS0BRD	0x28
+#define	P9030_LAS1BRD	0x2c
+#define	P9030_LAS2BRD	0x30
+#define	P9030_LAS3BRD	0x34
+#define	P9030_EROMBRD	0x38
+#define	P9030_CS0BASE	0x3C
+#define	P9030_CS1BASE	0x40
+#define	P9030_CS2BASE	0x44
+#define	P9030_CS3BASE	0x48
+#define	P9030_INTCSR 	0x4c
+#define	P9030_CNTRL  	0x50
+#define	P9030_GPIOC	0x54
+
+/* typedefs */
+
+
+/* locals */
+
+static struct pci_device_id supported[] = {
+	{ PLX9030_VENDOR_ID, PLX9030_DEVICE_ID },
+	{ }
+};
+
+/* forward declarations */
+void sysOutLong(ulong address, ulong value);
+
+
+/***************************************************************************
+*
+* Plx9030Init - init CS0..CS3 for CPC45
+*
+*
+* RETURNS: N/A
+*/
+
+void Plx9030Init (void)
+{
+    pci_dev_t   devno;
+    ulong	membaseCsr;	  /* base address of device memory space */
+    int		idx = 0;	  /* general index */
+
+
+    /* find plx9030 device */
+
+    if ((devno = pci_find_devices(supported, idx++)) < 0)
+    {
+	printf("No PLX9030 device found !!\n");
+	return;
+    }
+
+
+#ifdef PLX_DEBUG
+	printf("PLX 9030 device found ! devno = 0x%x\n",devno);
+#endif
+
+	membaseCsr   = PCI_PLX9030_MEMADDR;
+
+	/* set base address */
+	pci_write_config_dword(devno, PCI_BASE_ADDRESS_0, membaseCsr);
+
+	/* enable mapped memory and IO addresses */
+	pci_write_config_dword(devno,
+			       PCI_COMMAND,
+			       PCI_COMMAND_MEMORY |
+			       PCI_COMMAND_MASTER);
+
+
+	/* configure GBIOC */
+	sysOutLong((membaseCsr + P9030_GPIOC),   0x00000FC0);		/* CS2/CS3 enable */
+
+	/* configure CS0 (SRAM) */
+	sysOutLong((membaseCsr + P9030_LAS0BA),  0x00000001);		/* enable space base */
+	sysOutLong((membaseCsr + P9030_LAS0RR),  0x0FE00000);		/* 2 MByte */
+	sysOutLong((membaseCsr + P9030_LAS0BRD), 0x51928900);		/* 4 wait states */
+	sysOutLong((membaseCsr + P9030_CS0BASE), 0x00100001);		/* enable 2 MByte */	
+	/* remap CS0 (SRAM) */
+	pci_write_config_dword(devno, PCI_BASE_ADDRESS_2, SRAM_BASE);
+
+	/* configure CS1 (ST16552 / CHAN A) */
+	sysOutLong((membaseCsr + P9030_LAS1BA),  0x00400001);		/* enable space base */
+	sysOutLong((membaseCsr + P9030_LAS1RR),  0x0FFFFF00);		/* 256 byte */
+	sysOutLong((membaseCsr + P9030_LAS1BRD), 0x55122900);		/* 4 wait states */
+	sysOutLong((membaseCsr + P9030_CS1BASE), 0x00400081);		/* enable 256 Byte */	
+	/* remap CS1 (ST16552 / CHAN A) */
+	/* remap CS1 (ST16552 / CHAN A) */
+	pci_write_config_dword(devno, PCI_BASE_ADDRESS_3, ST16552_A_BASE);
+
+	/* configure CS2 (ST16552 / CHAN B) */
+	sysOutLong((membaseCsr + P9030_LAS2BA),  0x00800001);		/* enable space base */
+	sysOutLong((membaseCsr + P9030_LAS2RR),  0x0FFFFF00);		/* 256 byte */
+	sysOutLong((membaseCsr + P9030_LAS2BRD), 0x55122900);		/* 4 wait states */
+	sysOutLong((membaseCsr + P9030_CS2BASE), 0x00800081);		/* enable 256 Byte */	
+	/* remap CS2 (ST16552 / CHAN B) */
+	pci_write_config_dword(devno, PCI_BASE_ADDRESS_4, ST16552_B_BASE);
+
+	/* configure CS3 (BCSR) */
+	sysOutLong((membaseCsr + P9030_LAS3BA),  0x00C00001);		/* enable space base */
+	sysOutLong((membaseCsr + P9030_LAS3RR),  0x0FFFFF00);		/* 256 byte */
+	sysOutLong((membaseCsr + P9030_LAS3BRD), 0x55357A80);		/* 9 wait states */
+	sysOutLong((membaseCsr + P9030_CS3BASE), 0x00C00081);		/* enable 256 Byte */	
+	/* remap CS3 (DISPLAY and BCSR) */
+	pci_write_config_dword(devno, PCI_BASE_ADDRESS_5, BCSR_BASE);
+}
+
+void sysOutLong(ulong address, ulong value)
+{
+	*(ulong*)address = cpu_to_le32(value);
+}
+
diff --git a/board/cpc45/u-boot.lds b/board/cpc45/u-boot.lds
new file mode 100644
index 0000000000..611ac0a063
--- /dev/null
+++ b/board/cpc45/u-boot.lds
@@ -0,0 +1,128 @@
+/*
+ * (C) Copyright 2001-2003
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+OUTPUT_ARCH(powerpc)
+SEARCH_DIR(/lib); SEARCH_DIR(/usr/lib); SEARCH_DIR(/usr/local/lib); SEARCH_DIR(/usr/local/powerpc-any-elf/lib);
+/* Do we need any of these for elf?
+   __DYNAMIC = 0;    */
+SECTIONS
+{
+  /* Read-only sections, merged into text segment: */
+  . = + SIZEOF_HEADERS;
+  .interp : { *(.interp) }
+  .hash          : { *(.hash)		}
+  .dynsym        : { *(.dynsym)		}
+  .dynstr        : { *(.dynstr)		}
+  .rel.text      : { *(.rel.text)		}
+  .rela.text     : { *(.rela.text) 	}
+  .rel.data      : { *(.rel.data)		}
+  .rela.data     : { *(.rela.data) 	}
+  .rel.rodata    : { *(.rel.rodata) 	}
+  .rela.rodata   : { *(.rela.rodata) 	}
+  .rel.got       : { *(.rel.got)		}
+  .rela.got      : { *(.rela.got)		}
+  .rel.ctors     : { *(.rel.ctors)	}
+  .rela.ctors    : { *(.rela.ctors)	}
+  .rel.dtors     : { *(.rel.dtors)	}
+  .rela.dtors    : { *(.rela.dtors)	}
+  .rel.bss       : { *(.rel.bss)		}
+  .rela.bss      : { *(.rela.bss)		}
+  .rel.plt       : { *(.rel.plt)		}
+  .rela.plt      : { *(.rela.plt)		}
+  .init          : { *(.init)	}
+  .plt : { *(.plt) }
+  .text      :
+  {
+    cpu/mpc824x/start.o	(.text)
+    lib_ppc/board.o (.text)
+    lib_ppc/ppcstring.o	(.text)
+    lib_generic/vsprintf.o	(.text)
+    lib_generic/crc32.o		(.text)
+    lib_generic/zlib.o		(.text)
+
+		. = DEFINED(env_offset) ? env_offset : .;
+    common/environment.o (.text)
+
+		*(.text)
+
+    *(.fixup)
+    *(.got1)
+    . = ALIGN(16);
+    *(.rodata)
+    *(.rodata1)
+  }
+  .fini      : { *(.fini)    } =0
+  .ctors     : { *(.ctors)   }
+  .dtors     : { *(.dtors)   }
+
+  /* Read-write section, merged into data segment: */
+  . = (. + 0x0FFF) & 0xFFFFF000;
+  _erotext = .;
+  PROVIDE (erotext = .);
+  .reloc   :
+  {
+    *(.got)
+    _GOT2_TABLE_ = .;
+    *(.got2)
+    _FIXUP_TABLE_ = .;
+    *(.fixup)
+  }
+  __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >> 2;
+  __fixup_entries = (. - _FIXUP_TABLE_) >> 2;
+
+  .data    :
+  {
+    *(.data)
+    *(.data1)
+    *(.sdata)
+    *(.sdata2)
+    *(.dynamic)
+    CONSTRUCTORS
+  }
+  _edata  =  .;
+  PROVIDE (edata = .);
+
+  __start___ex_table = .;
+  __ex_table : { *(__ex_table) }
+  __stop___ex_table = .;
+
+  . = ALIGN(4096);
+  __init_begin = .;
+  .text.init : { *(.text.init) }
+  .data.init : { *(.data.init) }
+  . = ALIGN(4096);
+  __init_end = .;
+
+  __bss_start = .;
+  .bss       :
+  {
+   *(.sbss) *(.scommon)
+   *(.dynbss)
+   *(.bss)
+   *(COMMON)
+  }
+
+  _end = . ;
+  PROVIDE (end = .);
+}
+
diff --git a/board/cu824/cu824.c b/board/cu824/cu824.c
index a7c583cc38..f960ce51ea 100644
--- a/board/cu824/cu824.c
+++ b/board/cu824/cu824.c
@@ -98,11 +98,11 @@ Done:
  */
 #ifndef CONFIG_PCI_PNP
 static struct pci_config_table pci_sandpoint_config_table[] = {
-	{ PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID,
-	  PCI_BUS(CFG_ETH_DEV_FN), PCI_DEV(CFG_ETH_DEV_FN), PCI_FUNC(CFG_ETH_DEV_FN),
-	  pci_cfgfunc_config_device, { CFG_ETH_IOBASE,
-				       0,
-				       PCI_COMMAND_IO | PCI_COMMAND_MASTER }},
+	{ PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, 0x0f, PCI_ANY_ID,
+	  pci_cfgfunc_config_device, { PCI_ENET0_IOADDR,
+				       PCI_ENET0_MEMADDR,
+				       PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER }},
+
 	{ }
 };
 #endif
diff --git a/board/emk/top860/config.mk b/board/emk/top860/config.mk
new file mode 100644
index 0000000000..95917a18b6
--- /dev/null
+++ b/board/emk/top860/config.mk
@@ -0,0 +1,24 @@
+#
+# (C) Copyright 2003
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+TEXT_BASE = 0x80000000
diff --git a/board/innokom/flash.c b/board/innokom/flash.c
index 5505bb549b..b56707d232 100644
--- a/board/innokom/flash.c
+++ b/board/innokom/flash.c
@@ -86,81 +86,79 @@ flash_info_t    flash_info[CFG_MAX_FLASH_BANKS];
  */
 
 static struct part_info part;
+static int current_part = -1;
 
 #ifdef CONFIG_MTD_INNOKOM_16MB
 #ifdef CONFIG_MTD_INNOKOM_64MB
 #error Please define only one CONFIG_MTD_INNOKOM_XXMB option.
 #endif
 struct part_info* jffs2_part_info(int part_num) {
+	void *jffs2_priv_saved = part.jffs2_priv;
 
 	PRINTK2("jffs2_part_info: part_num=%i\n",part_num);
 
+	if (current_part == part_num)
+		return &part;
+
 	/* u-boot partition                                                 */
 	if(part_num==0){
-		if(part.usr_priv==(void*)1) return &part;
-
 		memset(&part, 0, sizeof(part));
-
+		
 		part.offset=(char*)0x00000000;
 		part.size=256*1024;
-
+		
 		/* Mark the struct as ready */
-		part.usr_priv=(void*)1;
+		current_part = part_num;
 
 		PRINTK("part.offset = 0x%08x\n",(unsigned int)part.offset);
 		PRINTK("part.size   = 0x%08x\n",(unsigned int)part.size);
-		return &part;
 	}
 
 	/* primary OS+firmware partition                                    */
 	if(part_num==1){
-		if(part.usr_priv==(void*)1) return &part;
-
 		memset(&part, 0, sizeof(part));
-
+		
 		part.offset=(char*)0x00040000;
 		part.size=768*1024;
-
+		
 		/* Mark the struct as ready */
-		part.usr_priv=(void*)1;
+		current_part = part_num;
 
 		PRINTK("part.offset = 0x%08x\n",(unsigned int)part.offset);
 		PRINTK("part.size   = 0x%08x\n",(unsigned int)part.size);
-		return &part;
 	}
-
+	
 	/* secondary OS+firmware partition                                  */
 	if(part_num==2){
-		if(part.usr_priv==(void*)1) return &part;
-
 		memset(&part, 0, sizeof(part));
-
+		
 		part.offset=(char*)0x00100000;
 		part.size=8*1024*1024;
-
+		
 		/* Mark the struct as ready */
-		part.usr_priv=(void*)1;
+		current_part = part_num;
 
 		PRINTK("part.offset = 0x%08x\n",(unsigned int)part.offset);
 		PRINTK("part.size   = 0x%08x\n",(unsigned int)part.size);
-		return &part;
 	}
 
 	/* data partition */
 	if(part_num==3){
-		if(part.usr_priv==(void*)1) return &part;
-
 		memset(&part, 0, sizeof(part));
-
+		
 		part.offset=(char*)0x00900000;
 		part.size=7*1024*1024;
-
+		
 		/* Mark the struct as ready */
-		part.usr_priv=(void*)1;
+		current_part = part_num;
 
 		PRINTK("part.offset = 0x%08x\n",(unsigned int)part.offset);
 		PRINTK("part.size   = 0x%08x\n",(unsigned int)part.size);
-
+	}
+	
+	if (current_part == part_num) {
+		part.usr_priv = &current_part;
+		part.jffs2_priv = jffs2_priv_saved;
 		return &part;
 	}
 
@@ -174,75 +172,72 @@ struct part_info* jffs2_part_info(int part_num) {
 #error Please define only one CONFIG_MTD_INNOKOM_XXMB option.
 #endif
 struct part_info* jffs2_part_info(int part_num) {
+	void *jffs2_priv_saved = part.jffs2_priv;
 
 	PRINTK2("jffs2_part_info: part_num=%i\n",part_num);
 
+	if (current_part == part_num)
+		return &part;
+
 	/* u-boot partition                                                 */
 	if(part_num==0){
-		if(part.usr_priv==(void*)1) return &part;
-
 		memset(&part, 0, sizeof(part));
-
+		
 		part.offset=(char*)0x00000000;
 		part.size=256*1024;
-
+		
 		/* Mark the struct as ready */
-		part.usr_priv=(void*)1;
+		current_part = part_num;
 
 		PRINTK("part.offset = 0x%08x\n",(unsigned int)part.offset);
 		PRINTK("part.size   = 0x%08x\n",(unsigned int)part.size);
-		return &part;
 	}
 
 	/* primary OS+firmware partition                                    */
 	if(part_num==1){
-		if(part.usr_priv==(void*)1) return &part;
-
 		memset(&part, 0, sizeof(part));
-
+		
 		part.offset=(char*)0x00040000;
 		part.size=16*1024*1024-128*1024;
-
+		
 		/* Mark the struct as ready */
-		part.usr_priv=(void*)1;
+		current_part = part_num;
 
 		PRINTK("part.offset = 0x%08x\n",(unsigned int)part.offset);
 		PRINTK("part.size   = 0x%08x\n",(unsigned int)part.size);
-		return &part;
 	}
-
+	
 	/* secondary OS+firmware partition                                  */
 	if(part_num==2){
-		if(part.usr_priv==(void*)1) return &part;
-
 		memset(&part, 0, sizeof(part));
-
+		
 		part.offset=(char*)0x01020000;
 		part.size=16*1024*1024-128*1024;
-
+		
 		/* Mark the struct as ready */
-		part.usr_priv=(void*)1;
+		current_part = part_num;
 
 		PRINTK("part.offset = 0x%08x\n",(unsigned int)part.offset);
 		PRINTK("part.size   = 0x%08x\n",(unsigned int)part.size);
-		return &part;
 	}
 
 	/* data partition */
 	if(part_num==3){
-		if(part.usr_priv==(void*)1) return &part;
-
 		memset(&part, 0, sizeof(part));
-
+		
 		part.offset=(char*)0x02000000;
 		part.size=32*1024*1024;
-
+		
 		/* Mark the struct as ready */
-		part.usr_priv=(void*)1;
+		current_part = part_num;
 
 		PRINTK("part.offset = 0x%08x\n",(unsigned int)part.offset);
 		PRINTK("part.size   = 0x%08x\n",(unsigned int)part.size);
-
+	}
+	
+	if (current_part == part_num) {
+		part.usr_priv = &current_part;
+		part.jffs2_priv = jffs2_priv_saved;
 		return &part;
 	}
 
@@ -336,13 +331,13 @@ void flash_print_info  (flash_info_t *info)
 				return;
 		}
 
-		printf("  Size: %ld MB in %d Sectors\n",
+		printf("  Size: %ld MB in %d Sectors\n", 
 			info->size >> 20, info->sector_count);
 
 		printf("  Sector Start Addresses:");
 		for (i = 0; i < info->sector_count; i++) {
 			if ((i % 5) == 0) printf ("\n   ");
-
+	        
 			printf (" %08lX%s", info->start[i],
 				info->protect[i] ? " (RO)" : "     ");
 		}
@@ -371,7 +366,7 @@ int flash_erase(flash_info_t *info, int s_first, int s_last)
 
 	if ((info->flash_id & FLASH_VENDMASK) != (INTEL_MANUFACT & FLASH_VENDMASK))
 		return ERR_UNKNOWN_FLASH_VENDOR;
-
+	
 	prot = 0;
 	for (sect=s_first; sect<=s_last; ++sect) {
 		if (info->protect[sect]) prot++;
@@ -421,13 +416,13 @@ int flash_erase(flash_info_t *info, int s_first, int s_last)
 					goto outahere;
 				}
 			}
-
+			
 			PRINTK("clearing status register\n");
-			*addr = 0x0050;
+			*addr = 0x0050; 
 			PRINTK("resetting to read mode");
-			*addr = 0x00FF;
+			*addr = 0x00FF; 
 		}
-
+		
 		printf("ok.\n");
 	}
 
diff --git a/board/ip860/ip860.c b/board/ip860/ip860.c
index 11f33279ee..a20c211055 100644
--- a/board/ip860/ip860.c
+++ b/board/ip860/ip860.c
@@ -28,7 +28,8 @@
 /* ------------------------------------------------------------------------- */
 
 static long int dram_size (long int, long int *, long int);
-
+unsigned long ip860_get_dram_size(void);
+unsigned long ip860_get_clk_freq (void);
 /* ------------------------------------------------------------------------- */
 
 #define	_NOT_USED_	0xFFFFFFFF
@@ -82,8 +83,22 @@ const uint sdram_table[] = {
 	_NOT_USED_, _NOT_USED_, _NOT_USED_,
 };
 
+
 /* ------------------------------------------------------------------------- */
+int board_pre_init(void)
+{
+    volatile immap_t     *immap  = (immap_t *)CFG_IMMR;
+    volatile memctl8xx_t *memctl = &immap->im_memctl;
+
+/* init BCSR chipselect line for ip860_get_clk_freq() and ip860_get_dram_size() */
+    memctl->memc_or4 = CFG_OR4;
+    memctl->memc_br4 = CFG_BR4;
 
+    return 0;
+}
+
+
+/* ------------------------------------------------------------------------- */
 
 /*
  * Check Board Identity:
@@ -127,6 +142,7 @@ long int initdram (int board_type)
 	volatile immap_t *immap = (immap_t *) CFG_IMMR;
 	volatile memctl8xx_t *memctl = &immap->im_memctl;
 	long int size;
+	ulong refresh_val;
 
 	upmconfig (UPMA, (uint *) sdram_table,
 			   sizeof (sdram_table) / sizeof (uint));
@@ -134,7 +150,17 @@ long int initdram (int board_type)
 	/*
 	 * Preliminary prescaler for refresh
 	 */
-	memctl->memc_mptpr = 0x0400;
+	if (ip860_get_clk_freq() == 50000000)
+	{
+		memctl->memc_mptpr = 0x0400;
+		refresh_val = 0xC3000000;
+	}
+	else
+	{
+		memctl->memc_mptpr = 0x0200;
+		refresh_val = 0x9C000000;
+	}
+
 
 	memctl->memc_mar = 0x00000088;
 
@@ -151,18 +177,22 @@ long int initdram (int board_type)
 
 	/* perform SDRAM initializsation sequence */
 
-	memctl->memc_mamr = 0xC3804114;
-	memctl->memc_mcr = 0x80004105;	/* run precharge pattern from loc 5 */
-	udelay (1);
-	memctl->memc_mamr = 0xC3804118;
-	memctl->memc_mcr = 0x80004130;	/* run refresh pattern 8 times */
+	memctl->memc_mamr = 0x00804114 | refresh_val;
+	memctl->memc_mcr  = 0x80004105;	/* run precharge pattern from loc 5 */
+	udelay(1);
+	memctl->memc_mamr = 0x00804118 | refresh_val;
+	memctl->memc_mcr  = 0x80004130;	/* run refresh pattern 8 times */
+
 
 	udelay (1000);
 
 	/*
 	 * Check SDRAM Memory Size
 	 */
-	size = dram_size (CFG_MAMR, (ulong *) SDRAM_BASE, SDRAM_MAX_SIZE);
+	if (ip860_get_dram_size() == 16)
+		size = dram_size (refresh_val | 0x00804114, (ulong *)SDRAM_BASE, SDRAM_MAX_SIZE);
+	else
+		size = dram_size (refresh_val | 0x00906114, (ulong *)SDRAM_BASE, SDRAM_MAX_SIZE);
 
 	udelay (1000);
 
@@ -291,3 +321,68 @@ void reset_phy (void)
 }
 
 /* ------------------------------------------------------------------------- */
+
+unsigned long ip860_get_clk_freq(void)
+{
+	volatile ip860_bcsr_t	*bcsr   = (ip860_bcsr_t *)BCSR_BASE;
+	ulong temp;
+	uchar sysclk;
+
+	if ((bcsr->bd_status & 0x80) == 0x80)	/* bd_rev valid ? */
+		sysclk = (bcsr->bd_rev & 0x18) >> 3;
+	else
+		sysclk = 0x00;
+
+	switch (sysclk)
+	{
+		case 0x00:
+			temp = 50000000;
+			break;
+
+		case 0x01:
+			temp = 80000000;
+			break;
+
+		default:
+			temp = 50000000;
+			break;
+	}
+
+	return (temp);
+
+}
+
+
+/* ------------------------------------------------------------------------- */
+
+unsigned long ip860_get_dram_size(void)
+{
+	volatile ip860_bcsr_t	*bcsr   = (ip860_bcsr_t *)BCSR_BASE;
+	ulong temp;
+	uchar dram_size;
+
+	if ((bcsr->bd_status & 0x80) == 0x80)	/* bd_rev valid ? */
+		dram_size = (bcsr->bd_rev & 0xE0) >> 5;
+	else
+		dram_size = 0x00;	/* default is 16 MB */
+
+	switch (dram_size)
+	{
+		case 0x00:
+			temp = 16;
+			break;
+
+		case 0x01:
+			temp = 32;
+			break;
+
+		default:
+			temp = 16;
+			break;
+	}
+
+	return (temp);
+
+}
+
+/* ------------------------------------------------------------------------- */
diff --git a/board/pm826/config.mk b/board/pm826/config.mk
index 8502e3f107..d2ab4fe985 100644
--- a/board/pm826/config.mk
+++ b/board/pm826/config.mk
@@ -33,10 +33,10 @@
 #
 
 ifeq ($(CONFIG_BOOT_ROM),y)
-	TEXT_BASE := 0x60000000
+	TEXT_BASE := 0xFF800000
 	PLATFORM_CPPFLAGS += -DCONFIG_BOOT_ROM
 else
-	TEXT_BASE := 0x40000000
+	TEXT_BASE := 0xFF000000
 endif
 
 PLATFORM_CPPFLAGS += -DTEXT_BASE=$(TEXT_BASE) -I$(TOPDIR)
diff --git a/board/trab/flash.c b/board/trab/flash.c
index d86c4bf770..27c2a5b490 100644
--- a/board/trab/flash.c
+++ b/board/trab/flash.c
@@ -185,9 +185,12 @@ int flash_erase (flash_info_t * info, int s_first, int s_last)
 		return ERR_INVAL;
 	}
 
-	if ((info->flash_id & FLASH_VENDMASK) !=
-		(FLASH_MAN_AMD & FLASH_VENDMASK)) {
-		return ERR_UNKNOWN_FLASH_VENDOR;
+	switch (info->flash_id & FLASH_VENDMASK) {
+	case (FLASH_MAN_AMD & FLASH_VENDMASK):	break;	/* OK */
+	case (FLASH_MAN_FUJ & FLASH_VENDMASK):	break;	/* OK */
+	default:
+		debug ("## flash_erase: unknown manufacturer\n");
+		return (ERR_UNKNOWN_FLASH_VENDOR);
 	}
 
 	prot = 0;
diff --git a/board/trab/vfd.c b/board/trab/vfd.c
index 5e601ef794..894e3157d6 100644
--- a/board/trab/vfd.c
+++ b/board/trab/vfd.c
@@ -55,7 +55,8 @@
 #define BLAU	0x0C
 #define VIOLETT	0X0D
 
-ulong	frame_buf_size;
+/* MAGIC */
+#define	FRAME_BUF_SIZE	((256*4*56)/8)
 #define frame_buf_offs 4
 
 /* Supported VFD Types */
@@ -75,19 +76,13 @@ void init_grid_ctrl(void)
 	ulong adr, grid_cycle;
 	unsigned int bit, display;
 	unsigned char temp, bit_nr;
-	ulong val;
 
 	/*
 	 * clear frame buffer (logical clear => set to "black")
 	 */
-	if (gd->vfd_inv_data == 0)
-		val = 0;
-	else
-		val = ~0;
-
-	for (adr = gd->fb_base; adr <= (gd->fb_base+7168); adr += 4) {
-		(*(volatile ulong*)(adr)) = val;
-	}
+	memset ((void *)(gd->fb_base),
+		gd->vfd_inv_data ? 0xFF : 0,
+		FRAME_BUF_SIZE);
 
 	switch (gd->vfd_type) {
 	case VFD_TYPE_T119C:
@@ -97,8 +92,8 @@ void init_grid_ctrl(void)
 			     (grid_cycle + 200) * 4 +
 			     frame_buf_offs + display;
  			/* wrap arround if offset (see manual S3C2400) */
-			if (bit>=frame_buf_size*8)
-				bit = bit - (frame_buf_size * 8);
+			if (bit>=FRAME_BUF_SIZE*8)
+				bit = bit - (FRAME_BUF_SIZE * 8);
 			adr = gd->fb_base + (bit/32) * 4 + (3 - (bit%32) / 8);
 			bit_nr = bit % 8;
 			bit_nr = (bit_nr > 3) ? bit_nr-4 : bit_nr+4;
@@ -114,8 +109,8 @@ void init_grid_ctrl(void)
 			else
 				bit = grid_cycle*256*4+200*4+frame_buf_offs+display-4; 	/* grid nr. 0 */
 			/* wrap arround if offset (see manual S3C2400) */
-			if (bit>=frame_buf_size*8)
-				bit = bit-(frame_buf_size*8);
+			if (bit>=FRAME_BUF_SIZE*8)
+				bit = bit-(FRAME_BUF_SIZE*8);
 			adr = gd->fb_base+(bit/32)*4+(3-(bit%32)/8);
 			bit_nr = bit%8;
 			bit_nr = (bit_nr>3)?bit_nr-4:bit_nr+4;
@@ -135,8 +130,8 @@ void init_grid_ctrl(void)
 			     (253 - grid_cycle) * 4 +
 			     frame_buf_offs + display;
 			/* wrap arround if offset (see manual S3C2400) */
-			if (bit>=frame_buf_size*8)
-				bit = bit - (frame_buf_size * 8);
+			if (bit>=FRAME_BUF_SIZE*8)
+				bit = bit - (FRAME_BUF_SIZE * 8);
 			adr = gd->fb_base + (bit/32) * 4 + (3 - (bit%32) / 8);
 			bit_nr = bit % 8;
 			bit_nr = (bit_nr > 3) ? bit_nr-4 : bit_nr+4;
@@ -151,8 +146,8 @@ void init_grid_ctrl(void)
 				bit = grid_cycle*256*4+(252-grid_cycle)*4+frame_buf_offs+display;
 
 			/* wrap arround if offset (see manual S3C2400) */
-			if (bit>=frame_buf_size*8)
-				bit = bit-(frame_buf_size*8);
+			if (bit>=FRAME_BUF_SIZE*8)
+				bit = bit-(FRAME_BUF_SIZE*8);
 			adr = gd->fb_base+(bit/32)*4+(3-(bit%32)/8);
 			bit_nr = bit%8;
 			bit_nr = (bit_nr>3)?bit_nr-4:bit_nr+4;
@@ -263,8 +258,8 @@ void create_vfd_table(void)
 				  * wrap arround if offset
 				  * (see manual S3C2400)
 				  */
-				if (pixel>=frame_buf_size*8)
-					pixel = pixel-(frame_buf_size*8);
+				if (pixel>=FRAME_BUF_SIZE*8)
+					pixel = pixel-(FRAME_BUF_SIZE*8);
 				adr    = gd->fb_base+(pixel/32)*4+(3-(pixel%32)/8);
 				bit_nr = pixel%8;
 				bit_nr = (bit_nr>3)?bit_nr-4:bit_nr+4;
@@ -466,7 +461,7 @@ int drv_vfd_init(void)
 	/* frame buffer startadr */
 	rLCDSADDR1 = gd->fb_base >> 1;
  	/* frame buffer endadr */
-	rLCDSADDR2 = (gd->fb_base + frame_buf_size) >> 1;
+	rLCDSADDR2 = (gd->fb_base + FRAME_BUF_SIZE) >> 1;
 	rLCDSADDR3 = ((256/4));
 
 	debug ("LCDSADDR1: %lX\n", rLCDSADDR1);
@@ -490,11 +485,8 @@ ulong vfd_setmem (ulong addr)
 {
 	ulong size;
 
-	/* MAGIC */
-	frame_buf_size = (256*4*56)/8;
-
 	/* Round up to nearest full page */
-	size = (frame_buf_size + (PAGE_SIZE - 1)) & ~(PAGE_SIZE - 1);
+	size = (FRAME_BUF_SIZE + (PAGE_SIZE - 1)) & ~(PAGE_SIZE - 1);
 
 	debug ("Reserving %ldk for VFD Framebuffer at: %08lx\n", size>>10, addr);
 
diff --git a/board/v37/flash.c b/board/v37/flash.c
index 4de0e14757..cb0e676a13 100644
--- a/board/v37/flash.c
+++ b/board/v37/flash.c
@@ -23,7 +23,7 @@
 
 /*
  * Yoo. Jonghoon, IPone, yooth@ipone.co.kr
- * PPCboot port on RPXlite board
+ * U-Boot port on RPXlite board
  *
  * Some of flash control words are modified. (from 2x16bit device
  * to 4x8bit device)
diff --git a/board/v37/v37.c b/board/v37/v37.c
index 764aff7916..f463af8e12 100644
--- a/board/v37/v37.c
+++ b/board/v37/v37.c
@@ -23,7 +23,7 @@
 
 /*
  * Yoo. Jonghoon, IPone, yooth@ipone.co.kr
- * PPCboot port on RPXlite board
+ * U-Boot port on RPXlite board
  *
  * DRAM related UPMA register values are modified.
  * See RPXLite engineering note : 50MHz/60ns - UPM RAM WORDS
diff --git a/common/cmd_fdos.c b/common/cmd_fdos.c
index 763f4181ac..4b411b3d37 100644
--- a/common/cmd_fdos.c
+++ b/common/cmd_fdos.c
@@ -53,7 +53,7 @@ int do_fdosboot(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 
     /* pre-set Boot file name */
     if ((name = getenv("bootfile")) == NULL) {
-        name = "pImage";
+        name = "uImage";
     }
 
     switch (argc) {
diff --git a/common/cmd_jffs2.c b/common/cmd_jffs2.c
index fc1d9c40f2..8df80612a7 100644
--- a/common/cmd_jffs2.c
+++ b/common/cmd_jffs2.c
@@ -83,7 +83,7 @@ jffs2_part_info(int part_num)
 int
 do_jffs2_fsload(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 {
-	char *filename = "pImage";
+	char *filename = "uImage";
 	ulong offset = CFG_LOAD_ADDR;
 	int size;
 	struct part_info *part;
diff --git a/common/main.c b/common/main.c
index 401efcf854..9ee32a5804 100644
--- a/common/main.c
+++ b/common/main.c
@@ -640,8 +640,6 @@ static void process_macros (const char *input, char *output)
 	    case 0:			/* Waiting for (unescaped) $	*/
 		if ((c == '\'') && (prev != '\\')) {
 			state = 3;
-			if (inputcnt)
-				inputcnt--;
 			break;
 		}
 		if ((c == '$') && (prev != '\\')) {
@@ -694,8 +692,6 @@ static void process_macros (const char *input, char *output)
 	    case 3:			/* Waiting for '	*/
 		if ((c == '\'') && (prev != '\\')) {
 			state = 0;
-			if (inputcnt)
-				inputcnt--;
 		} else {
 			*(output++) = c;
 			outputcnt--;
diff --git a/cpu/mpc8xx/cpu_init.c b/cpu/mpc8xx/cpu_init.c
index c0ee5de2e9..4bd91f98ca 100644
--- a/cpu/mpc8xx/cpu_init.c
+++ b/cpu/mpc8xx/cpu_init.c
@@ -42,8 +42,8 @@ void cpu_init_f (volatile immap_t * immr)
 {
 #ifndef CONFIG_MBX
 	volatile memctl8xx_t *memctl = &immr->im_memctl;
-	ulong reg;
 #endif
+	ulong reg;
 
 	/* SYPCR - contains watchdog control (11-9) */
 
diff --git a/doc/README-i386 b/doc/README-i386
index 99b3e198c4..862f3f7a3a 100644
--- a/doc/README-i386
+++ b/doc/README-i386
@@ -1,4 +1,4 @@
-This is my attempt to port PPCBoot to the i386 platform. This
+This is my attempt to port U-Boot to the i386 platform. This
 work was sponsored by my emplyer, Omicron Ceti AB. http://www.omicron.se
 
 It is currently capable of booting a linux bzImage from flash on
@@ -28,13 +28,13 @@ To use this code on the CDP:
 
 
 2) Program it in to the CDP flashbank with remon
-   ppcboot.bin should be programmed att offset 0x7e000 and the kernel at
+   u-boot.bin should be programmed att offset 0x7e000 and the kernel at
    offset 0. If you want to use a jffs2 root file system (not included here), 
    it should be  programmed to offset 0x100000.
    
    remon> z
    remon> yi
-   remon> ns ppcboot.bin 7e0000
+   remon> ns u-boot.bin 7e0000
    remon> ns bzImage 0
    remon> ns image.jffs2 100000
 
@@ -43,7 +43,7 @@ To use this code on the CDP:
    remon> z
    remon> g
 
-4) PPCboot should output some message and a prompt on the terminal, to
+4) U-Boot should output some message and a prompt on the terminal, to
    start the kernel issue the following command:
    
    BOOT> bootm
diff --git a/doc/README.IPHASE4539 b/doc/README.IPHASE4539
index d3db38ef54..9302ff5ce4 100644
--- a/doc/README.IPHASE4539
+++ b/doc/README.IPHASE4539
@@ -332,10 +332,10 @@ Linux:
 	$ make IPHASE4539_config
 	$ make oldconfig
 	$ make dep
-	$ make pImage
-	$ cp -p arch/ppc/mbxboot/pImage /tftpboot
+	$ make uImage
+	$ cp -p arch/ppc/mbxboot/uImage /tftpboot
 
-	Load pImage via tftp and boot it.
+	Load uImage via tftp and boot it.
 
 
 Flash organisation:
diff --git a/include/asm-i386/ppcboot-i386.h b/include/asm-i386/u-boot-i386.h
index 704526e2ff..6e5e059592 100644
--- a/include/asm-i386/ppcboot-i386.h
+++ b/include/asm-i386/u-boot-i386.h
@@ -21,8 +21,8 @@
  * MA 02111-1307 USA
  */
 
-#ifndef _PPCBOOT_I386_H_
-#define _PPCBOOT_I386_H_	1
+#ifndef _U_BOOT_I386_H_
+#define _U_BOOT_I386_H_	1
 
 /* for the following variables, see start.S */
 extern ulong i386boot_start;	    /* code start (in flash) */
@@ -50,4 +50,4 @@ int	board_init(void);
 int	dram_init (void);
 
 
-#endif	/* _PPCBOOT_I386_H_ */
+#endif	/* _U_BOOT_I386_H_ */
diff --git a/include/common.h b/include/common.h
index bce0132afc..ac2a57d9a3 100644
--- a/include/common.h
+++ b/include/common.h
@@ -149,7 +149,7 @@ void    setenv       (char *, char *);
 # include <asm/u-boot-arm.h>	/* ARM version to be fixed! */
 #endif /* CONFIG_ARM */
 #ifdef CONFIG_I386		/* x86 version to be fixed! */
-# include <asm/ppcboot-i386.h>  
+# include <asm/u-boot-i386.h>  
 #endif /* CONFIG_I386 */
 
 void    pci_init      (void);
diff --git a/include/commproc.h b/include/commproc.h
index 159c294f84..5ff82b71a8 100644
--- a/include/commproc.h
+++ b/include/commproc.h
@@ -595,6 +595,32 @@ typedef struct scc_enet {
 
 #endif	/* CONFIG_PCU_E, CONFIG_CCM */
 
+/***  ELPT860 *********************************************************/
+
+#ifdef CONFIG_ELPT860
+/* Bits in parallel I/O port registers that have to be set/cleared
+ * to configure the pins for SCC1 use.
+ */
+#  define PROFF_ENET        PROFF_SCC1
+#  define CPM_CR_ENET       CPM_CR_CH_SCC1
+#  define SCC_ENET          0
+
+#  define PA_ENET_RXD       ((ushort)0x0001)	/* PA 15 */
+#  define PA_ENET_TXD       ((ushort)0x0002)	/* PA 14 */
+#  define PA_ENET_RCLK      ((ushort)0x0100)	/* PA  7 */
+#  define PA_ENET_TCLK      ((ushort)0x0200)	/* PA  6 */
+
+#  define PC_ENET_TENA      ((ushort)0x0001)	/* PC 15 */
+#  define PC_ENET_CLSN      ((ushort)0x0010)	/* PC 11 */
+#  define PC_ENET_RENA      ((ushort)0x0020)	/* PC 10 */
+
+/* Control bits in the SICR to route TCLK (CLK2) and RCLK (CLK1) to
+ * SCC1.  Also, make sure GR1 (bit 24) and SC1 (bit 25) are zero.
+ */
+#  define SICR_ENET_MASK    ((uint)0x000000FF)
+#  define SICR_ENET_CLKRT   ((uint)0x00000025)
+#endif	/* CONFIG_ELPT860 */
+
 /***  ESTEEM 192E  **************************************************/
 #ifdef CONFIG_ESTEEM192E
 /* ESTEEM192E
diff --git a/include/configs/CPC45.h b/include/configs/CPC45.h
new file mode 100644
index 0000000000..ed843d40a4
--- /dev/null
+++ b/include/configs/CPC45.h
@@ -0,0 +1,448 @@
+/*
+ * (C) Copyright 2001-2003
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*
+ *
+ * Configuration settings for the CPC45 board.
+ *
+ */
+
+/* ------------------------------------------------------------------------- */
+
+/*
+ * board/config.h - configuration options, board specific
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+/*
+ * High Level Configuration Options
+ * (easy to change)
+ */
+
+#define CONFIG_MPC824X		1
+#define CONFIG_MPC8245		1
+#define CONFIG_CPC45		1
+
+
+#define CONFIG_CONS_INDEX	1
+#define CONFIG_BAUDRATE		9600
+#define CFG_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
+
+#define CONFIG_CLOCKS_IN_MHZ	1	/* clocks passsed to Linux in MHz	*/
+
+#define CONFIG_PREBOOT	"echo;echo Type \"run flash_nfs\" to mount root filesystem over NFS;echo"
+
+#define CONFIG_BOOTDELAY	5
+
+#define CONFIG_BOOTP_MASK	(CONFIG_BOOTP_DEFAULT | CONFIG_BOOTP_BOOTFILESIZE)
+
+#define CONFIG_COMMANDS	      ( CONFIG_CMD_DFL	| \
+				CFG_CMD_BEDBUG  | \
+				CFG_CMD_DHCP	| \
+				CFG_CMD_PCI	| \
+				0 /* CFG_CMD_DATE */	)
+
+/* This must be included AFTER the definition of CONFIG_COMMANDS (if any)
+ */
+#include <cmd_confdefs.h>
+
+
+/*
+ * Miscellaneous configurable options
+ */
+#define CFG_LONGHELP			/* undef to save memory		*/
+#define CFG_PROMPT	"=> "		/* Monitor Command Prompt	*/
+#define CFG_CBSIZE	256		/* Console I/O Buffer Size	*/
+
+#if 1
+#define	CFG_HUSH_PARSER		1	/* use "hush" command parser	*/
+#endif
+#ifdef	CFG_HUSH_PARSER
+#define	CFG_PROMPT_HUSH_PS2	"> "
+#endif
+
+/* Print Buffer Size
+ */
+#define CFG_PBSIZE	(CFG_CBSIZE + sizeof(CFG_PROMPT) + 16)
+
+#define	CFG_MAXARGS	16		/* max number of command args	*/
+#define CFG_BARGSIZE	CFG_CBSIZE	/* Boot Argument Buffer Size	*/
+#define CFG_LOAD_ADDR	0x00100000	/* Default load address		*/
+
+/*-----------------------------------------------------------------------
+ * Start addresses for the final memory configuration
+ * (Set up by the startup code)
+ * Please note that CFG_SDRAM_BASE _must_ start at 0
+ */
+
+#define CFG_SDRAM_BASE	    0x00000000
+
+#if defined(CONFIG_BOOT_ROM)
+#define CFG_FLASH_BASE	    0xFF000000
+#else
+#define CFG_FLASH_BASE	    0xFF800000
+#endif
+
+#define CFG_RESET_ADDRESS   0xFFF00100
+
+#define CFG_EUMB_ADDR	    0xFCE00000
+
+#define CFG_MONITOR_BASE    TEXT_BASE
+
+#define CFG_MONITOR_LEN	    (256 << 10) /* Reserve 256 kB for Monitor	*/
+#define CFG_MALLOC_LEN	    (128 << 10) /* Reserve 128 kB for malloc()	*/
+
+#define CFG_MEMTEST_START   0x00004000	/* memtest works on		*/
+#define CFG_MEMTEST_END	    0x02000000	/* 0 ... 32 MB in DRAM		*/
+
+	/* Maximum amount of RAM.
+	 */
+#define CFG_MAX_RAM_SIZE    0x10000000
+
+
+#if CFG_MONITOR_BASE >= CFG_FLASH_BASE
+#undef CFG_RAMBOOT
+#else
+#define CFG_RAMBOOT
+#endif
+
+
+/*-----------------------------------------------------------------------
+ * Definitions for initial stack pointer and data area
+ */
+
+	/* Size in bytes reserved for initial data
+	 */
+#define CFG_GBL_DATA_SIZE    128
+
+#define CFG_INIT_RAM_ADDR     0x40000000
+#define CFG_INIT_RAM_END      0x1000
+#define CFG_GBL_DATA_OFFSET  (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
+
+/*
+ * NS16550 Configuration
+ */
+#define CFG_NS16550		
+#define CFG_NS16550_SERIAL
+
+#define CFG_NS16550_REG_SIZE	1
+
+#define CFG_NS16550_CLK		get_bus_freq(0)
+
+#define CFG_NS16550_COM1	(CFG_EUMB_ADDR + 0x4500)
+#define CFG_NS16550_COM2	(CFG_EUMB_ADDR + 0x4600)
+#define	DUART_DCR		(CFG_EUMB_ADDR + 0x4511)
+
+/*
+ * Low Level Configuration Settings
+ * (address mappings, register initial values, etc.)
+ * You should know what you are doing if you make changes here.
+ * For the detail description refer to the MPC8240 user's manual.
+ */
+
+#define CONFIG_SYS_CLK_FREQ  33000000
+#define CFG_HZ		     1000
+/*
+ * SDRAM Configuration Settings
+ * Please note: currently only 64 and 128 MB SDRAM size supported
+ * set CFG_SDRAM_SIZE to 64 or 128
+ * Memory configuration using SPD information stored on the SODIMMs
+ * not yet supported.
+ */
+ 
+#define	CFG_SDRAM_SIZE    64		/* SDRAM size -- 64 or 128 MB supported */
+
+	/* Bit-field values for MCCR1.
+	 */
+#define CFG_ROMNAL	    0
+#define CFG_ROMFAL	    7
+
+#if (CFG_SDRAM_SIZE == 64)			/* 64 MB */
+#define CFG_BANK0_ROW	0			/* SDRAM bank 7-0 row address */
+#elif (CFG_SDRAM_SIZE == 128)			/* 128 MB */
+#define CFG_BANK0_ROW	2			/* SDRAM bank 7-0 row address */
+#else
+#  error "SDRAM size not supported"
+#endif
+#define CFG_BANK1_ROW	0	
+#define CFG_BANK2_ROW	0
+#define CFG_BANK3_ROW	0
+#define CFG_BANK4_ROW	0
+#define CFG_BANK5_ROW	0
+#define CFG_BANK6_ROW	0
+#define CFG_BANK7_ROW	0
+
+	/* Bit-field values for MCCR2.
+	 */
+#define CFG_REFINT	    430	    /* Refresh interval			*/
+
+	/* Burst To Precharge. Bits of this value go to MCCR3 and MCCR4.
+	 */
+#define CFG_BSTOPRE	    192
+
+	/* Bit-field values for MCCR3.
+	 */
+#define CFG_REFREC	    2	    /* Refresh to activate interval	*/
+#define CFG_RDLAT	    3	    /* Data latancy from read command	*/
+
+	/* Bit-field values for MCCR4.
+	 */
+#define CFG_PRETOACT	    2	    /* Precharge to activate interval	*/
+#define CFG_ACTTOPRE	    5	    /* Activate to Precharge interval	*/
+#define CFG_SDMODE_CAS_LAT  2	    /* SDMODE CAS latancy		*/
+#define CFG_SDMODE_WRAP	    0	    /* SDMODE wrap type			*/
+#define CFG_SDMODE_BURSTLEN 2	    /* SDMODE Burst length		*/
+#define CFG_ACTORW	    2
+#define CFG_REGISTERD_TYPE_BUFFER 1
+#define CFG_EXTROM	    1
+#define CFG_REGDIMM	    0
+
+/* Memory bank settings.
+ * Only bits 20-29 are actually used from these vales to set the
+ * start/end addresses. The upper two bits will always be 0, and the lower
+ * 20 bits will be 0x00000 for a start address, or 0xfffff for an end
+ * address. Refer to the MPC8240 book.
+ */
+
+#define CFG_BANK0_START	    0x00000000
+#define CFG_BANK0_END	    (CFG_MAX_RAM_SIZE - 1)
+#define CFG_BANK0_ENABLE    1
+#define CFG_BANK1_START	    0x3ff00000
+#define CFG_BANK1_END	    0x3fffffff
+#define CFG_BANK1_ENABLE    0
+#define CFG_BANK2_START	    0x3ff00000
+#define CFG_BANK2_END	    0x3fffffff
+#define CFG_BANK2_ENABLE    0
+#define CFG_BANK3_START	    0x3ff00000
+#define CFG_BANK3_END	    0x3fffffff
+#define CFG_BANK3_ENABLE    0
+#define CFG_BANK4_START	    0x3ff00000
+#define CFG_BANK4_END	    0x3fffffff
+#define CFG_BANK4_ENABLE    0
+#define CFG_BANK5_START	    0x3ff00000
+#define CFG_BANK5_END	    0x3fffffff
+#define CFG_BANK5_ENABLE    0
+#define CFG_BANK6_START	    0x3ff00000
+#define CFG_BANK6_END	    0x3fffffff
+#define CFG_BANK6_ENABLE    0
+#define CFG_BANK7_START	    0x3ff00000
+#define CFG_BANK7_END	    0x3fffffff
+#define CFG_BANK7_ENABLE    0
+
+#define CFG_ODCR	    0xff
+
+#define CFG_IBAT0L  (CFG_SDRAM_BASE | BATL_PP_10 | BATL_MEMCOHERENCE)
+#define CFG_IBAT0U  (CFG_SDRAM_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
+
+#define CFG_IBAT1L  (CFG_INIT_RAM_ADDR | BATL_PP_10 | BATL_MEMCOHERENCE)
+#define CFG_IBAT1U  (CFG_INIT_RAM_ADDR | BATU_BL_128K | BATU_VS | BATU_VP)
+
+#define CFG_IBAT2L  (0x80000000 | BATL_PP_10 | BATL_CACHEINHIBIT)
+#define CFG_IBAT2U  (0x80000000 | BATU_BL_256M | BATU_VS | BATU_VP)
+
+#define CFG_IBAT3L  (0xFC000000 | BATL_PP_10 | BATL_CACHEINHIBIT)
+#define CFG_IBAT3U  (0xFC000000 | BATU_BL_64M | BATU_VS | BATU_VP)
+
+#define CFG_DBAT0L  CFG_IBAT0L
+#define CFG_DBAT0U  CFG_IBAT0U
+#define CFG_DBAT1L  CFG_IBAT1L
+#define CFG_DBAT1U  CFG_IBAT1U
+#define CFG_DBAT2L  CFG_IBAT2L
+#define CFG_DBAT2U  CFG_IBAT2U
+#define CFG_DBAT3L  CFG_IBAT3L
+#define CFG_DBAT3U  CFG_IBAT3U
+
+/*
+ * For booting Linux, the board info and command line data
+ * have to be in the first 8 MB of memory, since this is
+ * the maximum mapped by the Linux kernel during initialization.
+ */
+#define CFG_BOOTMAPSZ	    (8 << 20)	/* Initial Memory map for Linux */
+
+/*-----------------------------------------------------------------------
+ * FLASH organization
+ */
+#define CFG_MAX_FLASH_BANKS	1	/* Max number of flash banks		*/
+#define CFG_MAX_FLASH_SECT	39	/* Max number of sectors in one bank	*/
+#define INTEL_ID_28F160F3T	0x88F388F3	/*  16M = 1M x 16 top boot sector	*/
+#define CFG_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms)	*/
+#define CFG_FLASH_WRITE_TOUT	500	/* Timeout for Flash Write (in ms)	*/
+
+	/* Warining: environment is not EMBEDDED in the ppcboot code.
+	 * It's stored in flash separately.
+	 */
+#define CFG_ENV_IS_IN_FLASH	    1
+
+#define CFG_ENV_ADDR		(CFG_FLASH_BASE + 0x7C0000)
+#define CFG_ENV_SIZE		0x4000	/* Size of the Environment		*/
+#define CFG_ENV_OFFSET		0	/* starting right at the beginning	*/
+#define CFG_ENV_SECT_SIZE	0x8000 /* Size of the Environment Sector	*/
+
+/*-----------------------------------------------------------------------
+ * Cache Configuration
+ */
+#define CFG_CACHELINE_SIZE	32
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#  define CFG_CACHELINE_SHIFT	5	/* log base 2 of the above value	*/
+#endif
+
+/*
+ * Internal Definitions
+ *
+ * Boot Flags
+ */
+#define BOOTFLAG_COLD		0x01	/* Normal Power-On: Boot from FLASH	*/
+#define BOOTFLAG_WARM		0x02	/* Software reboot			*/
+
+
+#define	SRAM_BASE		0x80000000	/* SRAM base address 	*/
+#define	SRAM_END		0x801FFFFF
+
+/*---------------------------------------------------------------------*/
+/* CPC45 Memory Map                                                    */
+/*---------------------------------------------------------------------*/
+#define	SRAM_BASE	0x80000000	/* SRAM base address            */
+#define	ST16552_A_BASE	0x80200000	/* ST16552 channel A		*/
+#define	ST16552_B_BASE	0x80400000	/* ST16552 channel A		*/
+#define	BCSR_BASE	0x80600000	/* board control / status registers */
+#define	DISPLAY_BASE	0x80600040	/* DISPLAY base			*/
+#define	PCMCIA_MEM_BASE	0x81000000	/* PCMCIA memory window base        */
+#define	PCMCIA_IO_BASE	0xFE000000	/* PCMCIA IO window base            */
+
+
+/*---------------------------------------------------------------------*/
+/* CPC45 Control/Status Registers                                      */
+/*---------------------------------------------------------------------*/
+#define	IRQ_ENA_1		*((volatile uchar*)(BCSR_BASE + 0x00))
+#define	IRQ_STAT_1		*((volatile uchar*)(BCSR_BASE + 0x01))
+#define	IRQ_ENA_2		*((volatile uchar*)(BCSR_BASE + 0x02))
+#define	IRQ_STAT_2		*((volatile uchar*)(BCSR_BASE + 0x03))
+#define	BOARD_CTRL		*((volatile uchar*)(BCSR_BASE + 0x04))
+#define	BOARD_STAT		*((volatile uchar*)(BCSR_BASE + 0x05))
+#define	WDG_START		*((volatile uchar*)(BCSR_BASE + 0x06))
+#define	WDG_PRESTOP		*((volatile uchar*)(BCSR_BASE + 0x06))
+#define	WDG_STOP		*((volatile uchar*)(BCSR_BASE + 0x06))
+#define	BOARD_REV		*((volatile uchar*)(BCSR_BASE + 0x07))
+
+/* IRQ_ENA_1 bit definitions */
+#define	I_ENA_1_IERA	0x80		/* INTA enable 			*/
+#define	I_ENA_1_IERB	0x40		/* INTB enable			*/
+#define	I_ENA_1_IERC	0x20		/* INTC enable			*/
+#define	I_ENA_1_IERD	0x10		/* INTD enable			*/
+
+/* IRQ_STAT_1 bit definitions */
+#define	I_STAT_1_INTA	0x80		/* INTA status			*/
+#define	I_STAT_1_INTB	0x40		/* INTB status			*/
+#define	I_STAT_1_INTC	0x20		/* INTC status			*/
+#define	I_STAT_1_INTD	0x10		/* INTD status			*/
+
+/* IRQ_ENA_2 bit definitions */
+#define	I_ENA_2_IEAB	0x80		/* ABORT IRQ enable		*/
+#define	I_ENA_2_IEK1	0x40		/* KEY1 IRQ enable		*/
+#define	I_ENA_2_IEK2	0x20		/* KEY2 IRQ enable		*/ 
+#define	I_ENA_2_IERT	0x10		/* RTC IRQ enable		*/
+#define	I_ENA_2_IESM	0x08		/* LM81 IRQ enable		*/
+#define	I_ENA_2_IEDG	0x04		/* DEGENERATING IRQ enable	*/
+#define	I_ENA_2_IES2	0x02		/* ST16552/B IRQ enable		*/
+#define	I_ENA_2_IES1	0x01		/* ST16552/A IRQ enable		*/
+
+/* IRQ_STAT_2 bit definitions */
+#define	I_STAT_2_ABO	0x80		/* ABORT IRQ status		*/
+#define	I_STAT_2_KY1	0x40		/* KEY1 IRQ status		*/
+#define	I_STAT_2_KY2	0x20		/* KEY2 IRQ status		*/ 
+#define	I_STAT_2_RTC	0x10		/* RTC IRQ status		*/
+#define	I_STAT_2_SMN	0x08		/* LM81 IRQ status		*/ 
+#define	I_STAT_2_DEG	0x04		/* DEGENERATING IRQ status	*/
+#define	I_STAT_2_SIO2	0x02		/* ST16552/B IRQ status		*/
+#define	I_STAT_2_SIO1	0x01		/* ST16552/A IRQ status		*/
+
+/* BOARD_CTRL bit definitions */
+#define	USER_LEDS		2			/* 2 user LEDs	*/
+
+#if (USER_LEDS == 4)
+#define	B_CTRL_WRSE		0x80
+#define	B_CTRL_KRSE		0x40
+#define	B_CTRL_FWRE		0x20		/* Flash write enable		*/
+#define	B_CTRL_FWPT		0x10		/* Flash write protect		*/
+#define	B_CTRL_LED3		0x08		/* LED 3 control		*/
+#define	B_CTRL_LED2		0x04		/* LED 2 control		*/
+#define	B_CTRL_LED1		0x02		/* LED 1 control		*/
+#define	B_CTRL_LED0		0x01		/* LED 0 control		*/
+#else
+#define	B_CTRL_WRSE		0x80
+#define	B_CTRL_KRSE		0x40
+#define	B_CTRL_FWRE_1		0x20		/* Flash write enable		*/
+#define	B_CTRL_FWPT_1		0x10		/* Flash write protect		*/
+#define	B_CTRL_LED1		0x08		/* LED 1 control		*/
+#define	B_CTRL_LED0		0x04		/* LED 0 control		*/
+#define	B_CTRL_FWRE_0		0x02		/* Flash write enable		*/
+#define	B_CTRL_FWPT_0		0x01		/* Flash write protect		*/
+#endif
+
+/* BOARD_STAT bit definitions */
+#define	B_STAT_WDGE		0x80
+#define	B_STAT_WDGS		0x40
+#define	B_STAT_WRST		0x20
+#define	B_STAT_KRST		0x10
+#define	B_STAT_CSW3		0x08		/* sitch bit 3 status		*/
+#define	B_STAT_CSW2		0x04		/* sitch bit 2 status		*/
+#define	B_STAT_CSW1		0x02		/* sitch bit 1 status		*/
+#define	B_STAT_CSW0		0x01		/* sitch bit 0 status		*/
+
+/*---------------------------------------------------------------------*/
+/* Display addresses                                                   */
+/*---------------------------------------------------------------------*/
+#define	DISP_UDC_RAM	(DISPLAY_BASE + 0x08)	/* UDC RAM	       */
+#define	DISP_CHR_RAM	(DISPLAY_BASE + 0x18)	/* character Ram       */
+#define	DISP_FLASH	(DISPLAY_BASE + 0x20)	/* Flash Ram           */
+
+#define	DISP_UDC_ADR	*((volatile uchar*)(DISPLAY_BASE + 0x00))	/* UDC Address Reg.    */
+#define	DISP_CWORD	*((volatile uchar*)(DISPLAY_BASE + 0x10))	/* Control Word Reg.   */
+
+#define	DISP_DIG0	*((volatile uchar*)(DISP_CHR_RAM + 0x00))	/* Digit 0 address     */      
+#define	DISP_DIG1	*((volatile uchar*)(DISP_CHR_RAM + 0x01))	/* Digit 0 address     */      
+#define	DISP_DIG2	*((volatile uchar*)(DISP_CHR_RAM + 0x02))	/* Digit 0 address     */
+#define	DISP_DIG3	*((volatile uchar*)(DISP_CHR_RAM + 0x03))	/* Digit 0 address     */      
+#define	DISP_DIG4	*((volatile uchar*)(DISP_CHR_RAM + 0x04))	/* Digit 0 address     */      
+#define	DISP_DIG5	*((volatile uchar*)(DISP_CHR_RAM + 0x05))	/* Digit 0 address     */
+#define	DISP_DIG6	*((volatile uchar*)(DISP_CHR_RAM + 0x06))	/* Digit 0 address     */      
+#define	DISP_DIG7	*((volatile uchar*)(DISP_CHR_RAM + 0x07))	/* Digit 0 address     */      
+
+
+/*-----------------------------------------------------------------------
+ * PCI stuff
+ *-----------------------------------------------------------------------
+ */
+#define CONFIG_PCI			/* include pci support			*/
+#undef CONFIG_PCI_PNP
+
+#define CONFIG_NET_MULTI		/* Multi ethernet cards support 	*/
+
+#define CONFIG_EEPRO100
+
+#define PCI_ENET0_IOADDR	0x00104000
+#define PCI_ENET0_MEMADDR	0x82000000
+#define	PCI_PLX9030_MEMADDR	0x82100000
+#endif	/* __CONFIG_H */
diff --git a/include/configs/CPU86.h b/include/configs/CPU86.h
index ae8525f9b9..9712d479c1 100644
--- a/include/configs/CPU86.h
+++ b/include/configs/CPU86.h
@@ -171,7 +171,7 @@
 				 CFG_CMD_EEPROM | \
 				 CFG_CMD_DATE	| \
 				 CFG_CMD_I2C	| \
-				 CFG_CMD_DOC)
+				 CFG_CMD_DOC	)
 
 /* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
 #include <cmd_confdefs.h>
@@ -329,8 +329,8 @@
 #define CFG_I2C_EEPROM_ADDR_OVERFLOW	0x07
 #define CFG_EEPROM_PAGE_WRITE_BITS	4
 #define CFG_EEPROM_PAGE_WRITE_DELAY_MS	10	/* and takes up to 10 msec */
-#define CFG_ENV_OFFSET		0
-#define CFG_ENV_SIZE		2048
+#define CFG_ENV_OFFSET		512
+#define CFG_ENV_SIZE		(2048 - 512)
 #endif
 
 /*
diff --git a/include/configs/CU824.h b/include/configs/CU824.h
index ed38ef6446..40ba25a62c 100644
--- a/include/configs/CU824.h
+++ b/include/configs/CU824.h
@@ -60,9 +60,10 @@
 #define CONFIG_BOOTP_MASK	(CONFIG_BOOTP_DEFAULT | CONFIG_BOOTP_BOOTFILESIZE)
 
 #define CONFIG_COMMANDS	      ( CONFIG_CMD_DFL	| \
+				CFG_CMD_BEDBUG  | \
 				CFG_CMD_DHCP	| \
 				CFG_CMD_PCI	| \
-				0/* CFG_CMD_DATE */	)
+				0 /* CFG_CMD_DATE */	)
 
 /* This must be included AFTER the definition of CONFIG_COMMANDS (if any)
  */
@@ -302,4 +303,7 @@
 #define CFG_ETH_DEV_FN	     0x7800
 #define CFG_ETH_IOBASE	     0x00104000
 
+#define CONFIG_EEPRO100
+#define PCI_ENET0_IOADDR	0x00104000
+#define PCI_ENET0_MEMADDR	0x80000000
 #endif	/* __CONFIG_H */
diff --git a/include/configs/ELPT860.h b/include/configs/ELPT860.h
new file mode 100644
index 0000000000..e9561b9eb4
--- /dev/null
+++ b/include/configs/ELPT860.h
@@ -0,0 +1,390 @@
+/*
+**=====================================================================
+**
+** Copyright (C) 2000, 2001, 2002, 2003
+** The LEOX team <team@leox.org>, http://www.leox.org
+**
+** LEOX.org is about the development of free hardware and software resources
+**   for system on chip.
+**
+** Description: U-Boot port on the LEOX's ELPT860 CPU board
+** ~~~~~~~~~~~
+**
+**=====================================================================
+**
+** This program is free software; you can redistribute it and/or
+** modify it under the terms of the GNU General Public License as
+** published by the Free Software Foundation; either version 2 of
+** the License, or (at your option) any later version.
+**
+** This program is distributed in the hope that it will be useful,
+** but WITHOUT ANY WARRANTY; without even the implied warranty of
+** MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+** GNU General Public License for more details.
+**
+** You should have received a copy of the GNU General Public License
+** along with this program; if not, write to the Free Software
+** Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+** MA 02111-1307 USA
+**
+**=====================================================================
+*/
+
+/*
+ * board/config.h - configuration options, board specific
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+
+/*
+ * High Level Configuration Options
+ * (easy to change)
+ */
+
+#define CONFIG_MPC860		1	/* It's a MPC860, in fact a 860T CPU */
+#define CONFIG_MPC860T		1
+#define CONFIG_ELPT860		1	/* ...on a LEOX's ELPT860 CPU board */
+
+#define	CONFIG_8xx_CONS_SMC1	1	/* Console is on SMC1		    */
+#undef	  CONFIG_8xx_CONS_SMC2
+#undef	  CONFIG_8xx_CONS_NONE
+
+#define CONFIG_CLOCKS_IN_MHZ    1  /* Clock passed to Linux (<2.4.5) in MHz */
+#define CONFIG_8xx_GCLK_FREQ    50000000       /* MPC860T runs at 50MHz */
+
+#define CONFIG_BOOTDELAY	5	/* autoboot after 5 seconds	*/
+
+#define CONFIG_BOARD_PRE_INIT   1       /* Call board_pre_init          */
+
+/* BOOT arguments */
+#define CONFIG_PREBOOT                                                     \
+     "echo;"	                                                           \
+     "echo Type \"run nfsboot\" to mount root filesystem over NFS;"        \
+     "echo"
+
+#undef	  CONFIG_BOOTARGS	
+
+#define	CONFIG_EXTRA_ENV_SETTINGS					\
+    "ramargs=setenv bootargs root=/dev/ram rw\0"			\
+    "rootargs=setenv rootpath /tftp/$(ipaddr)\0"			\
+    "nfsargs=setenv bootargs root=/dev/nfs rw "				\
+        "nfsroot=$(serverip):$(rootpath)\0"				\
+    "addip=setenv bootargs $(bootargs) "				\
+        "ip=$(ipaddr):$(serverip):$(gatewayip):$(netmask)"		\
+        ":$(hostname):eth0:off panic=1\0"				\
+    "ramboot=tftp 400000 /home/paugaml/pMulti;"				\
+        "run ramargs;bootm\0"						\
+    "nfsboot=tftp 400000 /home/paugaml/uImage;"				\
+        "run rootargs;run nfsargs;run addip;bootm\0"			\
+    ""
+#define CONFIG_BOOTCOMMAND	"run ramboot"
+
+#define CONFIG_BOOTP_MASK	(CONFIG_BOOTP_DEFAULT | CONFIG_BOOTP_BOOTFILESIZE)
+
+#undef	  CONFIG_WATCHDOG		/* watchdog disabled		*/
+#undef	  CONFIG_CAN_DRIVER		/* CAN Driver support disabled	*/
+#undef	  CONFIG_RTC_MPC8xx		/* internal RTC MPC8xx unused	*/
+#define CONFIG_RTC_DS164x       1       /* RTC is a Dallas DS1646       */
+
+#define CONFIG_LOADS_ECHO	1	/* echo on for serial download	*/
+#undef	  CFG_LOADS_BAUD_CHANGE		/* don't allow baudrate change	*/
+
+#define CONFIG_COMMANDS	        ( CONFIG_CMD_DFL | \
+                                  CFG_CMD_ASKENV | \
+                                  CFG_CMD_DATE   )
+
+/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
+#include <cmd_confdefs.h>
+
+/*
+ * Miscellaneous configurable options
+ */
+#define	CFG_LONGHELP			/* undef to save memory		*/
+#define	CFG_PROMPT     "LEOX_elpt860: "	/* Monitor Command Prompt	*/
+
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#  define CFG_CBSIZE	1024		/* Console I/O Buffer Size	*/
+#else
+#  define CFG_CBSIZE	 256		/* Console I/O Buffer Size	*/
+#endif
+
+#define	CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
+#define	CFG_MAXARGS	  16		/* max number of command args	*/
+#define CFG_BARGSIZE	  CFG_CBSIZE	/* Boot Argument Buffer Size	*/
+
+#define CFG_MEMTEST_START	0x00400000	/* memtest works on	*/
+#define CFG_MEMTEST_END		0x00C00000	/* 4 ... 12 MB in DRAM	*/
+
+#define	CFG_LOAD_ADDR		0x00100000	/* default load address	*/
+
+#define	CFG_HZ		1000		/* decrementer freq: 1 ms ticks	*/
+
+/*
+ * Environment Variables and Storages
+ */
+#define CONFIG_ENV_OVERWRITE    1  /* Allow Overwrite of serial# & ethaddr */
+
+#undef    CFG_ENV_IS_IN_NVRAM          /* Environment is in NVRAM       */
+#undef    CFG_ENV_IS_IN_EEPROM         /* Environment is in I2C EEPROM  */
+#define CFG_ENV_IS_IN_FLASH     1      /* Environment is in FLASH       */
+
+#define CONFIG_BAUDRATE		9600   /* console baudrate = 9600 bps   */
+#define CFG_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
+
+#define CONFIG_ETHADDR          00:01:77:00:60:40
+#define CONFIG_IPADDR           192.168.0.30
+#define CONFIG_NETMASK          255.255.255.0
+
+#define CONFIG_SERVERIP         192.168.0.1
+#define CONFIG_GATEWAYIP        192.168.0.1
+
+/*
+ * Low Level Configuration Settings
+ * (address mappings, register initial values, etc.)
+ * You should know what you are doing if you make changes here.
+ */
+
+/*-----------------------------------------------------------------------
+ * Internal Memory Mapped Register
+ */
+#define CFG_IMMR		0xFF000000
+
+/*-----------------------------------------------------------------------
+ * Definitions for initial stack pointer and data area (in DPRAM)
+ */
+#define CFG_INIT_RAM_ADDR	CFG_IMMR
+#define	CFG_INIT_RAM_END	0x2F00	/* End of used area in DPRAM	*/
+#define	CFG_GBL_DATA_SIZE	64  /* size in bytes reserved for initial data */
+#define CFG_GBL_DATA_OFFSET    (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
+#define	CFG_INIT_SP_OFFSET	CFG_GBL_DATA_OFFSET
+
+/*-----------------------------------------------------------------------
+ * Start addresses for the final memory configuration
+ * (Set up by the startup code)
+ * Please note that CFG_SDRAM_BASE _must_ start at 0
+ */
+#define	CFG_SDRAM_BASE		0x00000000
+#define CFG_FLASH_BASE		0x02000000
+#define CFG_NVRAM_BASE          0x03000000
+
+#if defined(CFG_ENV_IS_IN_FLASH)
+#  if defined(DEBUG)
+#    define CFG_MONITOR_LEN	(320 << 10)  /* Reserve 320 kB for Monitor  */
+#  else
+#    define CFG_MONITOR_LEN	(256 << 10)  /* Reserve 256 kB for Monitor  */
+#  endif
+#else
+#  if defined(DEBUG)
+#    define CFG_MONITOR_LEN	(256 << 10)  /* Reserve 256 kB for Monitor  */
+#  else
+#    define CFG_MONITOR_LEN	(192 << 10)  /* Reserve 192 kB for Monitor  */
+#  endif
+#endif
+
+#define CFG_MONITOR_BASE	CFG_FLASH_BASE
+#define	CFG_MALLOC_LEN		(128 << 10)  /* Reserve 128 kB for malloc() */
+
+/*
+ * For booting Linux, the board info and command line data
+ * have to be in the first 8 MB of memory, since this is
+ * the maximum mapped by the Linux kernel during initialization.
+ */
+#define	CFG_BOOTMAPSZ		(8 << 20)    /* Initial Memory map for Linux */
+
+/*-----------------------------------------------------------------------
+ * FLASH organization
+ */
+#define CFG_MAX_FLASH_BANKS	1	/* max number of memory banks        */
+#define CFG_MAX_FLASH_SECT	8	/* max number of sectors on one chip */
+
+#define CFG_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms)   */
+#define CFG_FLASH_WRITE_TOUT	500	/* Timeout for Flash Write (in ms)   */
+
+#if defined(CFG_ENV_IS_IN_FLASH)
+#  define CFG_ENV_OFFSET        0x10000	/* Offset   of Environment Sector    */
+#  define CFG_ENV_SIZE          0x10000 /* Total Size of Environment Sector  */
+#endif
+
+/*-----------------------------------------------------------------------
+ * NVRAM organization
+ */
+#define CFG_NVRAM_BASE_ADDR     CFG_NVRAM_BASE /* Base address of NVRAM area */
+#define CFG_NVRAM_SIZE          ((128*1024)-8) /* clock regs resident in the */
+                                               /*   8 top NVRAM locations    */
+
+#if defined(CFG_ENV_IS_IN_NVRAM)
+#  define CFG_ENV_ADDR          CFG_NVRAM_BASE /* Base address of NVRAM area */
+#  define CFG_ENV_SIZE          0x4000	/* Total Size of Environment Sector  */
+#endif
+
+/*-----------------------------------------------------------------------
+ * Cache Configuration
+ */
+#define CFG_CACHELINE_SIZE	16	/* For all MPC8xx CPUs               */
+
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#  define CFG_CACHELINE_SHIFT	 4      /* log base 2 of the above value     */
+#endif
+
+/*-----------------------------------------------------------------------
+ * SYPCR - System Protection Control				11-9
+ * SYPCR can only be written once after reset!
+ *-----------------------------------------------------------------------
+ * Software & Bus Monitor Timer max, Bus Monitor enable, SW Watchdog freeze
+ */
+#if defined(CONFIG_WATCHDOG)
+#  define CFG_SYPCR	(SYPCR_SWTC | SYPCR_BMT  | SYPCR_BME | SYPCR_SWF | \
+                         SYPCR_SWE  | SYPCR_SWRI | SYPCR_SWP)
+#else
+#  define CFG_SYPCR	(SYPCR_SWTC | SYPCR_BMT  | SYPCR_BME | SYPCR_SWF | \
+                                                   SYPCR_SWP)
+#endif
+
+/*-----------------------------------------------------------------------
+ * SUMCR - SIU Module Configuration				11-6
+ *-----------------------------------------------------------------------
+ * PCMCIA config., multi-function pin tri-state
+ */
+#define CFG_SIUMCR	(SIUMCR_DBGC11)
+
+/*-----------------------------------------------------------------------
+ * TBSCR - Time Base Status and Control				11-26
+ *-----------------------------------------------------------------------
+ * Clear Reference Interrupt Status, Timebase freezing enabled
+ */
+#define CFG_TBSCR	(TBSCR_REFA | TBSCR_REFB | TBSCR_TBF)
+
+/*-----------------------------------------------------------------------
+ * RTCSC - Real-Time Clock Status and Control Register		11-27
+ *-----------------------------------------------------------------------
+ * Once-per-Second Interrupt, Alarm Interrupt, RTC freezing enabled, RTC
+ *  enabled
+ */
+#define CFG_RTCSC	(RTCSC_SEC | RTCSC_ALR | RTCSC_RTF| RTCSC_RTE)
+
+/*-----------------------------------------------------------------------
+ * PISCR - Periodic Interrupt Status and Control		11-31
+ *-----------------------------------------------------------------------
+ * Clear Periodic Interrupt Status, Interrupt Timer freezing enabled
+ */
+#define CFG_PISCR	(PISCR_PS | PISCR_PITF)
+
+/*-----------------------------------------------------------------------
+ * PLPRCR - PLL, Low-Power, and Reset Control Register		15-30
+ *-----------------------------------------------------------------------
+ * Reset PLL lock status sticky bit, timer expired status bit and timer
+ * interrupt status bit - leave PLL multiplication factor unchanged !
+ */
+#define CFG_PLPRCR	(PLPRCR_SPLSS | PLPRCR_TEXPS | PLPRCR_TMIST)
+
+/*-----------------------------------------------------------------------
+ * SCCR - System Clock and reset Control Register		15-27
+ *-----------------------------------------------------------------------
+ * Set clock output, timebase and RTC source and divider,
+ * power management and some other internal clocks
+ */
+#define SCCR_MASK	 SCCR_EBDF11
+#define CFG_SCCR	(SCCR_TBS     | \
+			 SCCR_COM00   | SCCR_DFSYNC00 | SCCR_DFBRG00  | \
+			 SCCR_DFNL000 | SCCR_DFNH000  | SCCR_DFLCD000 | \
+			 SCCR_DFALCD00)
+
+/*-----------------------------------------------------------------------
+ * Chip Selects + SDRAM timings + Memory Periodic Timer Prescaler
+ *-----------------------------------------------------------------------
+ *
+ */
+#ifdef DEBUG
+#  define CFG_DER		0xFFE7400F	/* Debug Enable Register */
+#else
+#  define CFG_DER		0
+#endif
+
+/*
+ * Init Memory Controller:
+ * ~~~~~~~~~~~~~~~~~~~~~~
+ *
+ * BR0 and OR0 (FLASH)
+ */
+
+#define FLASH_BASE0_PRELIM	CFG_FLASH_BASE	/* FLASH bank #0          */
+
+/* used to re-map FLASH both when starting from SRAM or FLASH:
+ * restrict access enough to keep SRAM working (if any)
+ * but not too much to meddle with FLASH accesses
+ */
+#define CFG_PRELIM_OR_AM	0xFF000000	/* 16 MB between each CSx */
+
+/* FLASH timing: ACS = 11, TRLX = 0, CSNT = 0, SCY = 8, EHTR = 0	  */
+#define CFG_OR_TIMING_FLASH	(OR_ACS_DIV2 | OR_BI | OR_SCY_8_CLK)
+
+#define CFG_OR0_PRELIM	(CFG_PRELIM_OR_AM | CFG_OR_TIMING_FLASH)
+#define CFG_BR0_PRELIM	((FLASH_BASE0_PRELIM & BR_BA_MSK) | BR_PS_8 | BR_V )
+
+/*
+ * BR1 and OR1 (SDRAM)
+ *
+ */
+#define SDRAM_BASE1_PRELIM	CFG_SDRAM_BASE	/* SDRAM bank #0        */
+#define	SDRAM_MAX_SIZE		0x02000000	/* 32 MB MAX for CS1    */
+
+/* SDRAM timing:                                                        */
+#define CFG_OR_TIMING_SDRAM	0x00000000
+
+#define CFG_OR1_PRELIM	((2 * CFG_PRELIM_OR_AM) | CFG_OR_TIMING_SDRAM )
+#define CFG_BR1_PRELIM	((SDRAM_BASE1_PRELIM & BR_BA_MSK) | BR_MS_UPMA | BR_V )
+
+/*
+ * BR2 and OR2 (NVRAM)
+ *
+ */
+#define NVRAM_BASE1_PRELIM	CFG_NVRAM_BASE	/* NVRAM bank #0        */
+#define	NVRAM_MAX_SIZE		0x00020000	/* 128 KB MAX for CS2   */
+
+#define CFG_OR2_PRELIM	        0xFFF80160
+#define CFG_BR2_PRELIM	((NVRAM_BASE1_PRELIM & BR_BA_MSK) | BR_PS_8 | BR_V )
+
+/*
+ * Memory Periodic Timer Prescaler
+ */
+
+/* periodic timer for refresh */
+#define CFG_MAMR_PTA	        97     /* start with divider for 100 MHz */
+
+/* refresh rate 15.6 us (= 64 ms / 4K = 62.4 / quad bursts) for <= 128 MBit */
+#define CFG_MPTPR_2BK_4K	MPTPR_PTP_DIV16	  /* setting for 2 banks */
+#define CFG_MPTPR_1BK_4K	MPTPR_PTP_DIV32	  /* setting for 1 bank  */
+
+/* refresh rate 7.8 us (= 64 ms / 8K = 31.2 / quad bursts) for 256 MBit  */
+#define CFG_MPTPR_2BK_8K	MPTPR_PTP_DIV8    /* setting for 2 banks */
+#define CFG_MPTPR_1BK_8K	MPTPR_PTP_DIV16   /* setting for 1 bank  */
+
+/*
+ * MAMR settings for SDRAM
+ */
+
+/* 8 column SDRAM */
+#define CFG_MAMR_8COL	((CFG_MAMR_PTA << MAMR_PTA_SHIFT)  | MAMR_PTAE	    | \
+			 MAMR_AMA_TYPE_0 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A11 | \
+			 MAMR_RLFA_1X	 | MAMR_WLFA_1X	   | MAMR_TLFA_4X)
+/* 9 column SDRAM */
+#define CFG_MAMR_9COL	((CFG_MAMR_PTA << MAMR_PTA_SHIFT)  | MAMR_PTAE	    | \
+			 MAMR_AMA_TYPE_1 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A10 | \
+			 MAMR_RLFA_1X	 | MAMR_WLFA_1X	   | MAMR_TLFA_4X)
+
+/*-----------------------------------------------------------------------
+ * Internal Definitions
+ *-----------------------------------------------------------------------
+ *
+ */
+
+/*
+ * Boot Flags
+ */
+#define	BOOTFLAG_COLD	0x01             /* Normal Power-On: Boot from FLASH */
+#define BOOTFLAG_WARM	0x02             /* Software reboot                  */
+
+
+#endif	/* __CONFIG_H */
diff --git a/include/configs/IP860.h b/include/configs/IP860.h
index 6fa2d19c2f..d7dce71e31 100644
--- a/include/configs/IP860.h
+++ b/include/configs/IP860.h
@@ -35,6 +35,7 @@
 
 #define CONFIG_MPC860		1	/* This is a MPC860 CPU		*/
 #define CONFIG_IP860		1	/* ...on a IP860 board		*/
+#define CONFIG_BOARD_PRE_INIT	1	    /* Call board_pre_init	*/
 
 #define	CONFIG_8xx_CONS_SMC1	1	/* Console is on SMC1		*/
 #define CONFIG_BAUDRATE		9600
@@ -45,10 +46,6 @@
 #define CONFIG_PREBOOT	"echo;echo Type \"run flash_nfs\" to mount root filesystem over NFS;echo" \
 "\0load=tftp \"/tftpboot/u-boot.bin\"\0update=protect off 1:0;era 1:0;cp.b 100000 10000000 $(filesize)\0"
 
-#define CONFIG_ETHADDR	00:30:bf:01:02:d2
-#define CONFIG_IPADDR	10.0.0.5
-#define CONFIG_SERVERIP	10.0.0.2
-
 #undef	CONFIG_BOOTARGS
 #define CONFIG_BOOTCOMMAND							\
 	"bootp; "								\
@@ -230,10 +227,13 @@
 			 SIUMCR_DBGC11 | SIUMCR_MLRC10)
 
 /*-----------------------------------------------------------------------
- * Clock Setting - the IP860 has no 32kHz clock, so automatic detection fails
+ * Clock Setting - get clock frequency from Board Revision Register 
  *-----------------------------------------------------------------------
  */
-#define	CONFIG_8xx_GCLK_FREQ	50000000
+#ifndef __ASSEMBLY__
+extern  unsigned long           ip860_get_clk_freq (void);
+#endif
+#define	CONFIG_8xx_GCLK_FREQ	ip860_get_clk_freq()
 
 /*-----------------------------------------------------------------------
  * TBSCR - Time Base Status and Control				11-26
@@ -430,6 +430,8 @@ typedef	struct ip860_bcsr_s {
 	unsigned char	wd_trigger;	/* +1A Watchdog trigger register	*/
 	unsigned char	reservedD;
 	unsigned char	rmw_req;	/* +1C RMW request register		*/
+	unsigned char	reservedE;
+	unsigned char	bd_rev;		/* +1E Board Revision register		*/
 } ip860_bcsr_t;
 #endif	/* __ASSEMBLY__ */
 
diff --git a/include/configs/PM826.h b/include/configs/PM826.h
index b56da695e8..d95596cadf 100644
--- a/include/configs/PM826.h
+++ b/include/configs/PM826.h
@@ -158,9 +158,9 @@
 #define CONFIG_COMMANDS		(CONFIG_CMD_DFL	| \
 				 CFG_CMD_BEDBUG	| \
 				 CFG_CMD_DATE	| \
+				 CFG_CMD_DOC	| \
 				 CFG_CMD_EEPROM | \
-				 CFG_CMD_I2C	| \
-				 CFG_CMD_DOC)
+				 CFG_CMD_I2C	)
 
 /* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
 #include <cmd_confdefs.h>
@@ -211,11 +211,11 @@
  * Flash and Boot ROM mapping
  */
 
-#define	CFG_BOOTROM_BASE	0x60000000
+#define	CFG_BOOTROM_BASE	0xFF800000
 #define	CFG_BOOTROM_SIZE	0x00080000
-#define	CFG_FLASH0_BASE		0x40000000
+#define	CFG_FLASH0_BASE		0xFF000000
 #define	CFG_FLASH0_SIZE		0x02000000
-#define CFG_DOC_BASE		0x60000000
+#define CFG_DOC_BASE		0xFF800000
 #define CFG_DOC_SIZE		0x00100000
 
 
@@ -245,8 +245,8 @@
 #define CFG_I2C_EEPROM_ADDR_LEN	1
 #define CFG_EEPROM_PAGE_WRITE_BITS	4
 #define CFG_EEPROM_PAGE_WRITE_DELAY_MS	10	/* and takes up to 10 msec */
-#define CFG_ENV_OFFSET		0
-#define CFG_ENV_SIZE		2048
+#define CFG_ENV_OFFSET		512
+#define CFG_ENV_SIZE		(2048 - 512)
 #endif
 
 /*-----------------------------------------------------------------------
diff --git a/include/configs/PN62.h b/include/configs/PN62.h
index 0750116246..6c37208c05 100644
--- a/include/configs/PN62.h
+++ b/include/configs/PN62.h
@@ -70,7 +70,7 @@
 			"root=/dev/nfs rw nfsroot=$(serverip):$(rootpath) " \
 			"ip=$(ipaddr):$(serverip)::$(netmask):pn62:eth0:off;" \
 			"loadp 100000; bootm"
-			/* "tftpboot 100000 pImage; bootm" */
+			/* "tftpboot 100000 uImage; bootm" */
 #else
 /* Boot Linux with RAMdisk based filesystem (initrd, BusyBox) */
 #define CONFIG_BOOTCOMMAND \
diff --git a/include/configs/RRvision.h b/include/configs/RRvision.h
index ad36c95603..acfe747cec 100644
--- a/include/configs/RRvision.h
+++ b/include/configs/RRvision.h
@@ -75,7 +75,7 @@
 		"setenv filesize;saveenv\0"				\
 	"kernel_addr=40040000\0"					\
 	"ramdisk_addr=40100000\0"					\
-	"kernel_img=/tftpboot/pImage\0"					\
+	"kernel_img=/tftpboot/uImage\0"					\
 	"kernel_load=tftp 200000 $(kernel_img)\0"			\
 	"net_nfs=run kernel_load nfsargs addip addtty;bootm\0"		\
 	"flash_nfs=run nfsargs addip addtty;bootm $(kernel_addr)\0"	\
diff --git a/include/configs/SPD823TS.h b/include/configs/SPD823TS.h
index bbd5939f2f..9ad1839154 100644
--- a/include/configs/SPD823TS.h
+++ b/include/configs/SPD823TS.h
@@ -74,7 +74,7 @@
 #define CONFIG_IPADDR		10.0.0.98
 #define CONFIG_SERVERIP		10.0.0.1
 #undef	CONFIG_BOOTCOMMAND
-#define CONFIG_BOOTCOMMAND	"tftp 200000 pImage;bootm 200000"
+#define CONFIG_BOOTCOMMAND	"tftp 200000 uImage;bootm 200000"
 /*----------------------------------------------------------------------*/
 
 /*
diff --git a/include/configs/TQM823L.h b/include/configs/TQM823L.h
index 6836326828..cc51ce6674 100644
--- a/include/configs/TQM823L.h
+++ b/include/configs/TQM823L.h
@@ -71,7 +71,7 @@
 		"bootm $(kernel_addr) $(ramdisk_addr)\0"		\
 	"net_nfs=tftp 200000 $(bootfile);run nfsargs addip;bootm\0"	\
 	"rootpath=/opt/eldk/ppc_8xx\0"					\
-	"bootfile=/tftpboot/TQM860L/pImage\0"				\
+	"bootfile=/tftpboot/TQM860L/uImage\0"				\
 	"kernel_addr=40040000\0"					\
 	"ramdisk_addr=40100000\0"					\
 	""
diff --git a/include/configs/TQM850L.h b/include/configs/TQM850L.h
index 71e08ce817..60aacfb762 100644
--- a/include/configs/TQM850L.h
+++ b/include/configs/TQM850L.h
@@ -67,7 +67,7 @@
 		"bootm $(kernel_addr) $(ramdisk_addr)\0"		\
 	"net_nfs=tftp 200000 $(bootfile);run nfsargs addip;bootm\0"	\
 	"rootpath=/opt/eldk/ppc_8xx\0"					\
-	"bootfile=/tftpboot/TQM860L/pImage\0"				\
+	"bootfile=/tftpboot/TQM860L/uImage\0"				\
 	"kernel_addr=40040000\0"					\
 	"ramdisk_addr=40100000\0"					\
 	""
diff --git a/include/configs/TQM855L.h b/include/configs/TQM855L.h
index ac0e28a15e..37363a25ff 100644
--- a/include/configs/TQM855L.h
+++ b/include/configs/TQM855L.h
@@ -67,7 +67,7 @@
 		"bootm $(kernel_addr) $(ramdisk_addr)\0"		\
 	"net_nfs=tftp 200000 $(bootfile);run nfsargs addip;bootm\0"	\
 	"rootpath=/opt/eldk/ppc_8xx\0"					\
-	"bootfile=/tftpboot/TQM860L/pImage\0"				\
+	"bootfile=/tftpboot/TQM860L/uImage\0"				\
 	"kernel_addr=40040000\0"					\
 	"ramdisk_addr=40100000\0"					\
 	""
diff --git a/include/configs/TQM860L.h b/include/configs/TQM860L.h
index 5564b2310e..0d0b8c3162 100644
--- a/include/configs/TQM860L.h
+++ b/include/configs/TQM860L.h
@@ -67,7 +67,7 @@
 		"bootm $(kernel_addr) $(ramdisk_addr)\0"		\
 	"net_nfs=tftp 200000 $(bootfile);run nfsargs addip;bootm\0"	\
 	"rootpath=/opt/eldk/ppc_8xx\0"					\
-	"bootfile=/tftpboot/TQM860L/pImage\0"				\
+	"bootfile=/tftpboot/TQM860L/uImage\0"				\
 	"kernel_addr=40040000\0"					\
 	"ramdisk_addr=40100000\0"					\
 	""
diff --git a/include/configs/lwmon.h b/include/configs/lwmon.h
index 66c79356f4..fa466007c9 100644
--- a/include/configs/lwmon.h
+++ b/include/configs/lwmon.h
@@ -97,7 +97,7 @@
 		"bootm $(kernel_addr)\0"					\
 	"flash_self=run ramargs addip add_wdt addfb add_misc;"	\
 		"bootm $(kernel_addr) $(ramdisk_addr)\0"			\
-	"net_nfs=tftp 100000 /tftpboot/pImage.lwmon;"		\
+	"net_nfs=tftp 100000 /tftpboot/uImage.lwmon;"		\
 		"run nfsargs addip add_wdt addfb;bootm\0"	\
 	"rootpath=/opt/eldk/ppc_8xx\0"						\
 	"load=tftp 100000 /tftpboot/u-boot.bin\0"				\
diff --git a/lib_ppc/board.c b/lib_ppc/board.c
index a6464f0016..c617049f58 100644
--- a/lib_ppc/board.c
+++ b/lib_ppc/board.c
@@ -635,12 +635,15 @@ void board_init_r (gd_t *id, ulong dest_addr)
 	icache_enable ();	/* it's time to enable the instruction cache */
 #endif
 
-#if defined(CONFIG_BAB7xx)
+#if defined(CONFIG_BAB7xx) || defined(CONFIG_CPC45)
 	/*
-	 * Do pci configuration on BAB 7xx _before_ the flash
-	 * is initialised, because we need the ISA bridge there.
+	 * Do PCI configuration on BAB7xx and CPC45 _before_ the flash
+	 * gets initialised, because we need the ISA resp. PCI_to_LOCAL bus
+	 * bridge there.
 	 */
 	pci_init ();
+#endif
+#if defined(CONFIG_BAB7xx)
 	/*
 	 * Initialise the ISA bridge
 	 */
@@ -821,6 +824,7 @@ void board_init_r (gd_t *id, ulong dest_addr)
 
 #if (CONFIG_COMMANDS & CFG_CMD_NET) && ( \
     defined(CONFIG_CCM)		|| \
+    defined(CONFIG_ELPT860)	|| \
     defined(CONFIG_EP8260)	|| \
     defined(CONFIG_IP860)	|| \
     defined(CONFIG_IVML24)	|| \
diff --git a/rtc/Makefile b/rtc/Makefile
index 5d6c7f557a..5e471a6fd6 100644
--- a/rtc/Makefile
+++ b/rtc/Makefile
@@ -28,7 +28,7 @@ include $(TOPDIR)/config.mk
 LIB	= librtc.a
 
 OBJS	= date.o   \
-	  ds1302.o ds1306.o ds1307.o ds1337.o ds1556.o ds174x.o \
+	  ds1302.o ds1306.o ds1307.o ds1337.o ds1556.o ds164x.o ds174x.o \
 	  m41t11.o m48t35ax.o mc146818.o mk48t59.o \
 	  mpc8xx.o pcf8563.o
 
diff --git a/rtc/ds164x.c b/rtc/ds164x.c
new file mode 100644
index 0000000000..3f329c73cc
--- /dev/null
+++ b/rtc/ds164x.c
@@ -0,0 +1,200 @@
+/*
+ * (C) Copyright 2002
+ * ARIO Data Networks, Inc. dchiu@ariodata.com
+ * 
+ * modified for DS164x:
+ * The LEOX team <team@leox.org>, http://www.leox.org
+ *
+ * Based on MontaVista DS1743 code and U-Boot mc146818 code
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*
+ * Date & Time support for the DS164x RTC
+ */
+
+/* #define	RTC_DEBUG */
+
+#include <common.h>
+#include <command.h>
+#include <rtc.h>
+
+
+#if defined(CONFIG_RTC_DS164x) && (CONFIG_COMMANDS & CFG_CMD_DATE)
+
+static uchar    rtc_read(unsigned int addr );
+static void     rtc_write(unsigned int addr, uchar val);
+static uchar    bin2bcd(unsigned int n);
+static unsigned bcd2bin(uchar c);
+
+#define RTC_EPOCH                 2000	/* century */
+
+/*
+ * DS164x registers layout
+ */
+#define RTC_BASE		( CFG_NVRAM_BASE_ADDR + CFG_NVRAM_SIZE )
+
+#define RTC_YEAR		( RTC_BASE + 0x07 )
+#define RTC_MONTH		( RTC_BASE + 0x06 )
+#define RTC_DAY_OF_MONTH	( RTC_BASE + 0x05 )
+#define RTC_DAY_OF_WEEK		( RTC_BASE + 0x04 )
+#define RTC_HOURS		( RTC_BASE + 0x03 )
+#define RTC_MINUTES		( RTC_BASE + 0x02 )
+#define RTC_SECONDS		( RTC_BASE + 0x01 )
+#define RTC_CONTROL		( RTC_BASE + 0x00 )
+
+#define RTC_CONTROLA		RTC_CONTROL	/* W=bit6, R=bit5 */
+#define   RTC_CA_WRITE		  0x80
+#define   RTC_CA_READ		  0x40
+#define RTC_CONTROLB		RTC_SECONDS	/* OSC=bit7       */
+#define   RTC_CB_OSC_DISABLE	  0x80
+#define RTC_CONTROLC		RTC_DAY_OF_WEEK	/* FT=bit6        */
+#define   RTC_CC_FREQ_TEST	  0x40
+
+/* ------------------------------------------------------------------------- */
+
+void rtc_get( struct rtc_time *tmp )
+{
+	uchar sec, min, hour;
+	uchar mday, wday, mon, year;
+
+	uchar reg_a;
+
+	reg_a = rtc_read( RTC_CONTROLA );
+	/* lock clock registers for read */
+	rtc_write( RTC_CONTROLA, ( reg_a | RTC_CA_READ ));
+
+	sec     = rtc_read( RTC_SECONDS );
+	min     = rtc_read( RTC_MINUTES );
+	hour    = rtc_read( RTC_HOURS );
+	mday    = rtc_read( RTC_DAY_OF_MONTH );
+	wday    = rtc_read( RTC_DAY_OF_WEEK );
+	mon     = rtc_read( RTC_MONTH );
+	year    = rtc_read( RTC_YEAR );
+
+	/* unlock clock registers after read */
+	rtc_write( RTC_CONTROLA, ( reg_a & ~RTC_CA_READ ));
+
+#ifdef RTC_DEBUG
+	printf( "Get RTC year: %02x mon: %02x mday: %02x wday: %02x "
+		"hr: %02x min: %02x sec: %02x\n",
+		year, mon, mday, wday,
+		hour, min, sec );
+#endif
+	tmp->tm_sec  = bcd2bin( sec  & 0x7F );
+	tmp->tm_min  = bcd2bin( min  & 0x7F );
+	tmp->tm_hour = bcd2bin( hour & 0x3F );
+	tmp->tm_mday = bcd2bin( mday & 0x3F );
+	tmp->tm_mon  = bcd2bin( mon  & 0x1F );
+	tmp->tm_wday = bcd2bin( wday & 0x07 );
+
+	/* glue year in century (2000) */
+	tmp->tm_year = bcd2bin( year ) + RTC_EPOCH;
+
+	tmp->tm_yday = 0;
+	tmp->tm_isdst= 0;
+#ifdef RTC_DEBUG
+	printf( "Get DATE: %4d-%02d-%02d (wday=%d)  TIME: %2d:%02d:%02d\n",
+		tmp->tm_year, tmp->tm_mon, tmp->tm_mday, tmp->tm_wday,
+		tmp->tm_hour, tmp->tm_min, tmp->tm_sec );
+#endif
+}
+
+void rtc_set( struct rtc_time *tmp )
+{
+	uchar reg_a;
+
+#ifdef RTC_DEBUG
+	printf( "Set DATE: %4d-%02d-%02d (wday=%d)  TIME: %2d:%02d:%02d\n",
+		tmp->tm_year, tmp->tm_mon, tmp->tm_mday, tmp->tm_wday,
+		tmp->tm_hour, tmp->tm_min, tmp->tm_sec);
+#endif
+	/* lock clock registers for write */
+	reg_a = rtc_read( RTC_CONTROLA );
+	rtc_write( RTC_CONTROLA, ( reg_a | RTC_CA_WRITE ));
+
+	rtc_write( RTC_MONTH, bin2bcd( tmp->tm_mon ));
+
+	rtc_write( RTC_DAY_OF_WEEK, bin2bcd( tmp->tm_wday ));
+	rtc_write( RTC_DAY_OF_MONTH, bin2bcd( tmp->tm_mday ));
+	rtc_write( RTC_HOURS, bin2bcd( tmp->tm_hour ));
+	rtc_write( RTC_MINUTES, bin2bcd( tmp->tm_min ));
+	rtc_write( RTC_SECONDS, bin2bcd( tmp->tm_sec ));
+
+	/* break year in century */
+	rtc_write( RTC_YEAR, bin2bcd( tmp->tm_year % 100 ));
+
+	/* unlock clock registers after read */
+	rtc_write( RTC_CONTROLA, ( reg_a  & ~RTC_CA_WRITE ));
+}
+
+void rtc_reset (void)
+{
+	uchar reg_a, reg_b;
+
+	reg_a = rtc_read( RTC_CONTROLA );
+	reg_b = rtc_read( RTC_CONTROLB );
+
+	if ( reg_b & RTC_CB_OSC_DISABLE )
+	{
+		printf( "real-time-clock was stopped. Now starting...\n" );
+		reg_a |= RTC_CA_WRITE;
+		reg_b &= ~RTC_CB_OSC_DISABLE;
+
+		rtc_write( RTC_CONTROLA, reg_a );
+		rtc_write( RTC_CONTROLB, reg_b );
+	}
+
+	/* make sure read/write clock register bits are cleared */
+	reg_a &= ~( RTC_CA_WRITE | RTC_CA_READ );
+	rtc_write( RTC_CONTROLA, reg_a );
+}
+
+/* ------------------------------------------------------------------------- */
+
+static uchar rtc_read( unsigned int addr )
+{
+	uchar val = *(volatile unsigned char*)(addr);
+
+#ifdef RTC_DEBUG
+	printf( "rtc_read: %x:%x\n", addr, val );
+#endif
+	return( val );
+}
+
+static void rtc_write( unsigned int addr, uchar val )
+{
+#ifdef RTC_DEBUG
+	printf( "rtc_write: %x:%x\n", addr, val );
+#endif
+	*(volatile unsigned char*)(addr) = val;
+}
+
+static unsigned bcd2bin (uchar n)
+{
+	return ((((n >> 4) & 0x0F) * 10) + (n & 0x0F));
+}
+
+static unsigned char bin2bcd (unsigned int n)
+{
+	return (((n / 10) << 4) | (n % 10));
+}
+
+#endif	/* CONFIG_RTC_DS164x && CFG_CMD_DATE */
diff --git a/tools/env/fw_env_main.c b/tools/env/fw_env_main.c
index 1c22e7143d..696e30efda 100644
--- a/tools/env/fw_env_main.c
+++ b/tools/env/fw_env_main.c
@@ -22,7 +22,7 @@
  */
 
 /*
- * Command line user interface to firmware (=PPCBoot) environment.
+ * Command line user interface to firmware (=U-Boot) environment.
  *
  * Implements:
  *	fw_printenv [ name ... ]
author	wdenk <wdenk>	2003-03-12 10:41:04 +0000
committer	wdenk <wdenk>	2003-03-12 10:41:04 +0000
commit	3bac351370ef7cbf9d2af27ba52bee1703ad677e (patch)
tree	689fbd22fcde4e63a0f4909acb3ea65475099e9c
parent	1cb8e980c41e86760fa93de63f4e4cf643bef9d9 (diff)
download	talos-obmc-uboot-3bac351370ef7cbf9d2af27ba52bee1703ad677e.tar.gz talos-obmc-uboot-3bac351370ef7cbf9d2af27ba52bee1703ad677e.zip