move erratum a008336 and a008514 to soc specific file

As the errata A008336 and A008514 do not apply to all LS series SoCs
(such as LS1021A, LS1043A) we move them to an soc specific file

Signed-off-by: Yuan Yao <yao.yuan@freescale.com>
Reviewed-by: York Sun <yorksun@freescale.com>

2 files changed, 37 insertions, 34 deletions

diff --git a/arch/arm/cpu/armv8/fsl-layerscape/soc.c b/arch/arm/cpu/armv8/fsl-layerscape/soc.c
index 8896b70e78..a0de4becd1 100644
--- a/arch/arm/cpu/armv8/fsl-layerscape/soc.c
+++ b/arch/arm/cpu/armv8/fsl-layerscape/soc.c
@@ -14,6 +14,41 @@
 DECLARE_GLOBAL_DATA_PTR;
 
 #if defined(CONFIG_LS2080A) || defined(CONFIG_LS2085A)
+/*
+ * This erratum requires setting a value to eddrtqcr1 to
+ * optimal the DDR performance.
+ */
+static void erratum_a008336(void)
+{
+	u32 *eddrtqcr1;
+
+#ifdef CONFIG_SYS_FSL_ERRATUM_A008336
+#ifdef CONFIG_SYS_FSL_DCSR_DDR_ADDR
+	eddrtqcr1 = (void *)CONFIG_SYS_FSL_DCSR_DDR_ADDR + 0x800;
+	out_le32(eddrtqcr1, 0x63b30002);
+#endif
+#ifdef CONFIG_SYS_FSL_DCSR_DDR2_ADDR
+	eddrtqcr1 = (void *)CONFIG_SYS_FSL_DCSR_DDR2_ADDR + 0x800;
+	out_le32(eddrtqcr1, 0x63b30002);
+#endif
+#endif
+}
+
+/*
+ * This erratum requires a register write before being Memory
+ * controller 3 being enabled.
+ */
+static void erratum_a008514(void)
+{
+	u32 *eddrtqcr1;
+
+#ifdef CONFIG_SYS_FSL_ERRATUM_A008514
+#ifdef CONFIG_SYS_FSL_DCSR_DDR3_ADDR
+	eddrtqcr1 = (void *)CONFIG_SYS_FSL_DCSR_DDR3_ADDR + 0x800;
+	out_le32(eddrtqcr1, 0x63b20002);
+#endif
+#endif
+}
 #ifdef CONFIG_SYS_FSL_ERRATUM_A009635
 #define PLATFORM_CYCLE_ENV_VAR	"a009635_interval_val"
 
@@ -118,6 +153,8 @@ void fsl_lsch3_early_init_f(void)
 	erratum_rcw_src();
 	init_early_memctl_regs();	/* tighten IFC timing */
 	erratum_a009203();
+	erratum_a008514();
+	erratum_a008336();
 }
 
 #elif defined(CONFIG_LS1043A)
diff --git a/drivers/ddr/fsl/fsl_ddr_gen4.c b/drivers/ddr/fsl/fsl_ddr_gen4.c
index 0755ff7c24..3fca5c2684 100644
--- a/drivers/ddr/fsl/fsl_ddr_gen4.c
+++ b/drivers/ddr/fsl/fsl_ddr_gen4.c
@@ -49,10 +49,6 @@ void fsl_ddr_set_memctl_regs(const fsl_ddr_cfg_regs_t *regs,
 	u32 temp_sdram_cfg;
 	u32 total_gb_size_per_controller;
 	int timeout;
-#if defined(CONFIG_SYS_FSL_ERRATUM_A008336) || \
-	defined(CONFIG_SYS_FSL_ERRATUM_A008514)
-	u32 *eddrtqcr1;
-#endif
 #ifdef CONFIG_SYS_FSL_ERRATUM_A008511
 	u32 temp32, mr6;
 	u32 vref_seq1[3] = {0x80, 0x96, 0x16};	/* for range 1 */
@@ -70,36 +66,20 @@ void fsl_ddr_set_memctl_regs(const fsl_ddr_cfg_regs_t *regs,
 	switch (ctrl_num) {
 	case 0:
 		ddr = (void *)CONFIG_SYS_FSL_DDR_ADDR;
-#if defined(CONFIG_SYS_FSL_ERRATUM_A008336) || \
-	defined(CONFIG_SYS_FSL_ERRATUM_A008514)
-		eddrtqcr1 = (void *)CONFIG_SYS_FSL_DCSR_DDR_ADDR + 0x800;
-#endif
 		break;
 #if defined(CONFIG_SYS_FSL_DDR2_ADDR) && (CONFIG_NUM_DDR_CONTROLLERS > 1)
 	case 1:
 		ddr = (void *)CONFIG_SYS_FSL_DDR2_ADDR;
-#if defined(CONFIG_SYS_FSL_ERRATUM_A008336) || \
-	defined(CONFIG_SYS_FSL_ERRATUM_A008514)
-		eddrtqcr1 = (void *)CONFIG_SYS_FSL_DCSR_DDR2_ADDR + 0x800;
-#endif
 		break;
 #endif
 #if defined(CONFIG_SYS_FSL_DDR3_ADDR) && (CONFIG_NUM_DDR_CONTROLLERS > 2)
 	case 2:
 		ddr = (void *)CONFIG_SYS_FSL_DDR3_ADDR;
-#if defined(CONFIG_SYS_FSL_ERRATUM_A008336) || \
-	defined(CONFIG_SYS_FSL_ERRATUM_A008514)
-		eddrtqcr1 = (void *)CONFIG_SYS_FSL_DCSR_DDR3_ADDR + 0x800;
-#endif
 		break;
 #endif
 #if defined(CONFIG_SYS_FSL_DDR4_ADDR) && (CONFIG_NUM_DDR_CONTROLLERS > 3)
 	case 3:
 		ddr = (void *)CONFIG_SYS_FSL_DDR4_ADDR;
-#if defined(CONFIG_SYS_FSL_ERRATUM_A008336) || \
-	defined(CONFIG_SYS_FSL_ERRATUM_A008514)
-		eddrtqcr1 = (void *)CONFIG_SYS_FSL_DCSR_DDR4_ADDR + 0x800;
-#endif
 		break;
 #endif
 	default:
@@ -110,20 +90,6 @@ void fsl_ddr_set_memctl_regs(const fsl_ddr_cfg_regs_t *regs,
 	if (step == 2)
 		goto step2;
 
-#ifdef CONFIG_SYS_FSL_ERRATUM_A008336
-#if defined(CONFIG_LS2080A) || defined(CONFIG_LS2085A)
-	/* A008336 only applies to general DDR controllers */
-	if ((ctrl_num == 0) || (ctrl_num == 1))
-#endif
-		ddr_out32(eddrtqcr1, 0x63b30002);
-#endif
-#ifdef CONFIG_SYS_FSL_ERRATUM_A008514
-#if defined(CONFIG_LS2080A) || defined(CONFIG_LS2085A)
-	/* A008514 only applies to DP-DDR controler */
-	if (ctrl_num == 2)
-#endif
-		ddr_out32(eddrtqcr1, 0x63b20002);
-#endif
 	if (regs->ddr_eor)
 		ddr_out32(&ddr->eor, regs->ddr_eor);