diff options
| author | Jon Loeliger <jdl@freescale.com> | 2008-11-10 10:04:51 -0600 |
|---|---|---|
| committer | Jon Loeliger <jdl@freescale.com> | 2008-11-10 10:04:51 -0600 |
| commit | 33211469f7d7e2afacf103cc55790f734572f7a6 (patch) | |
| tree | 7c374cde48fba08b52b4f83bdf00aae89d7f85a3 | |
| parent | 1266df887781c779deaf6d05eea2ef90a470cb34 (diff) | |
| parent | 1378174a1351c0285736863a665ab758fe8d5f71 (diff) | |
| download | talos-obmc-uboot-33211469f7d7e2afacf103cc55790f734572f7a6.tar.gz talos-obmc-uboot-33211469f7d7e2afacf103cc55790f734572f7a6.zip | |
Merge commit 'wd/master'
156 files changed, 7619 insertions, 8536 deletions
@@ -1,3 +1,2227 @@ +commit a47f957ab523019992fdef857af01bd71c58a4da +Author: Alessandro Rubini <rubini-list@gnudd.com> +Date: Fri Oct 31 22:33:21 2008 +0100 + + NAND: Allow NAND and OneNAND to coexist + + This removes in nand.h code that is verbatim duplicated from bbm.h, + including directly bbm.h in nand.h. The previous state of affairs + prevented compiling code for a board hosting both NAND and OneNAND chips. + + Reported-by: Scott Wood <scottwood@freescale.com> + Signed-off-by: Alessandro Rubini <rubini@unipv.it> + Signed-off-by: Scott Wood <scottwood@freescale.com> + +commit 2f77c7f45b9a37ef265a8dbe3c18efa706fed214 +Author: Scott Wood <scottwood@freescale.com> +Date: Fri Oct 31 13:51:12 2008 -0500 + + JFFS2: Eliminate compiler error when both NAND and OneNAND are enabled. + + Reported-by: Alessandro Rubini <rubini-list@gnudd.com> + Signed-off-by: Scott Wood <scottwood@freescale.com> + +commit c57fc28947e248fb03c49a28b467686299895055 +Author: Jason Jin <Jason.Jin@freescale.com> +Date: Fri Oct 31 05:07:04 2008 -0500 + + NAND: Add NAND support for MPC8536DS board + + This patch defines 1M TLB&LAW size for NAND on MPC8536DS, assigns 0xffa00000 + for CONFIG_SYS_NAND_BASE and adds other NAND supports in config file. + It also moves environment(CONFIG_ENV_ADDR) outside of u-boot image. + + Singed-off-by: Jason Jin <Jason.Jin@freescale.com> + Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com> + Signed-off-by: Kumar Gala <galak@kernel.crashing.org> + +commit 6fc110bd8a8d642b8f7b0653bd9a08a0b7c3d50b +Author: Haiying Wang <Haiying.Wang@freescale.com> +Date: Fri Oct 31 05:06:14 2008 -0500 + + NAND: Fix CONFIG_ENV_ADDR for MPC8572DS + + CONFIG_ENV_ADDR should be (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE). + + Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com> + Signed-off-by: Kumar Gala <galak@kernel.crashing.org> + +commit 51b572a801be57790fe26adaa530210e7fba59cc +Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> +Date: Fri Oct 24 10:49:48 2008 +0900 + + sh: rsk7203: Moved rsk7203 board to board/renesas + + Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> + +commit 58453b00b3ebb26aaa901210023f99504a90bb00 +Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> +Date: Fri Oct 24 10:48:31 2008 +0900 + + sh: MigoR: Moved MigoR board to board/renesas + + Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> + +commit c1da2a22817ba85b437afa2f4e715e658b219fd1 +Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> +Date: Fri Oct 24 10:39:44 2008 +0900 + + sh: r2dplus: Moved r2dplus board to board/renesas + + Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> + +commit 78385bf2359d828184d0b3649f7ae6b933420000 +Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> +Date: Fri Oct 24 10:36:13 2008 +0900 + + sh: sh7763rdp: Moved sh7763rdp board to board/renesas + + Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> + +commit c6525d459c350bfc246ea7826456af77e1e314eb +Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> +Date: Fri Oct 24 10:35:19 2008 +0900 + + sh: sh7785lcr: Moved sh7785lcr board to board/renesas + + Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> + +commit acd3e30d09a73f876222f0d496c4f52ee9d0771d +Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> +Date: Fri Oct 24 10:34:21 2008 +0900 + + sh: r7780mp: Moved r7780mp board to board/renesas + + Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> + +commit f84e6ea275353b8fea772ec7553ff7e4b1f642e0 +Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> +Date: Fri Oct 24 10:32:14 2008 +0900 + + sh: ap325rxa: Moved ap325rxa board to board/renesas + + Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> + +commit 9abda6ba735efb059f63dcb25d78b174bfcad1ad +Author: Wolfgang Denk <wd@xpert.denx.de> +Date: Fri Oct 31 01:12:28 2008 +0100 + + CFI Driver: Fix "flash not ready" problem + + This patch fixes a problem on systems where the NOR flash is attached + to a 64 bit bus. The toggle bit detection in flash_toggle() is based + on the assumption that the same flash address is read twice without + any other interjacent flash accesses. However, on 32 bit systems the + function flash_read64() [as currently implemented] does not perform + an atomic 64 bit read - instead, this is broken down into two 32 bit + read accesses on addresses "addr" and "addr + 4". So instead of + reading a 64 bit value twice from "addr", we see a sequence of 4 32 + bit reads from "addr", "addr + 4", "addr", and "addr + 4". The + consequence is that flash_toggle() fails to work. + + This patch implements a simple, but somewhat ugly solution, as it + avoids the use of flash_read64() in this critical place (by breaking + it down manually into 32 bit read operations) instead of rewriting + flash_read64() such to perform atomic 64 bit reads as one could + expect. However, such a rewrite would require the use of floating + point load operations, which becomes pretty complex: + + save MSR; + set Floating Point Enable bit in MSR; + use "lfd" instruction to perform atomic 64 bit read; + use "stfd" to store value to temporary variable on stack; + load u64 value from temporary variable; + restore saved MSR; + return u64 value; + + The benefit-cost ratio of such an implementation was considered too + bad to actually attempt this, especially as we can expect that such + an implementation would not only have a bigger memory footprint but + also cause a performance degradation. + + Signed-off-by: Wolfgang Denk <wd@denx.de> + Signed-off-by: Stefan Roese <sr@denx.de> + +commit cdd4fe63b094d4b767f12ff241d72566b461ee61 +Author: Stefan Roese <sr@denx.de> +Date: Fri Oct 31 10:48:08 2008 +0100 + + ppc4xx: Fix spelling error in MAINTAINERS file + + Signed-off-by: Stefan Roese <sr@denx.de> + +commit be270798900b75ad9c47c7b79c72f70441196c56 +Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com> +Date: Tue Oct 28 13:37:00 2008 +0100 + + ppc4xx: Update PMC440 board support + + This patch brings PMC440 board support up to date: + + - fix GPIO configuration + - add misc_init_f() + - use better values for usbact variable + - fix USB 2.0 phy reset sequence + - shrink BAR2 to save PCI address space + - add FDT support + + Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com> + Signed-off-by: Stefan Roese <sr@denx.de> + +commit 75183b1a7fc04206d9779d13f16e03853d7e965d +Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com> +Date: Tue Oct 28 13:36:59 2008 +0100 + + ppc4xx: Fix PMC440 BSP commands + + This patch fixes the PMC440 BSP commands painit and selfreset + + Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com> + Signed-off-by: Stefan Roese <sr@denx.de> + +commit 76b565b69f886d5ae748db65e44f464b0e70d41a +Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com> +Date: Tue Oct 28 13:36:58 2008 +0100 + + ppc4xx: Update PMC440 board configuration + + Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com> + Signed-off-by: Stefan Roese <sr@denx.de> + +commit ca0c2d42b93116a8e1b8ef8ad4493c7dc9b5f2e4 +Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com> +Date: Tue Oct 28 13:36:57 2008 +0100 + + ppc4xx: Fix esd loadpci command + + This patch fixes esd's loadpci command when not all + memory on adapter boards is accessable via PCI. + + Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com> + Signed-off-by: Stefan Roese <sr@denx.de> + +commit 492aa9ea13791ca4591b5bde895a425e27ae2d10 +Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com> +Date: Tue Oct 28 13:36:56 2008 +0100 + + ppc4xx: Clean up PMC440 header + + -Codingstyle cleanup + -Remove unused GPIO define + + Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com> + Signed-off-by: Stefan Roese <sr@denx.de> + +commit 295133258a44f97a57fb2ec339aecfda11f4db95 +Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com> +Date: Tue Oct 28 13:36:55 2008 +0100 + + ppc4xx: Handle other board variant in PMC440 FPGA code + + Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com> + Signed-off-by: Stefan Roese <sr@denx.de> + +commit cc2dc9b08cf7c09f9f237f8cb9303f11603d4fb0 +Author: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es> +Date: Mon Oct 27 12:35:59 2008 +0100 + + ppc4xx: Merge xilinx-ppc440 and xilinx-ppc405 cfg + + Xilinx ppc440 and ppc405 have many similarities. This patch merge the + config files of both infrastuctures + + Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es> + Signed-off-by: Stefan Roese <sr@denx.de> + +commit 3befd85633d33c4dcca1f359c3f4848c5ab8e4d2 +Author: Stefan Roese <sr@denx.de> +Date: Sat Oct 25 06:45:31 2008 +0200 + + ppc4xx: Correctly configure the GPIO pin muxing on Arches + + Arches doesn't use PerCS3 but GPIO43, so let's configure the GPIO + pin multiplexing correctly + + Signed-off-by: Stefan Roese <sr@denx.de> + +commit 7c84fe6a06dad9f793ed85b39b1e6c11a7882f5c +Author: Bartlomiej Sieka <tur@semihalf.com> +Date: Thu Oct 30 23:22:04 2008 +0100 + + Fix to the auto-update feature documentation (CONFIG_UPDATE_TFTP_MSEC_MAX) + + Signed-off-by: Bartlomiej Sieka <tur@semihalf.com> + +commit 4bc7deee9095f21e243b724ca3d634251c1d5432 +Author: David Gibson <david@gibson.dropbear.id.au> +Date: Wed Oct 29 23:27:45 2008 -0500 + + libfdt: Fix bug in fdt_subnode_offset_namelen() + + There's currently an off-by-one bug in fdt_subnode_offset_namelen() + which causes it to keep searching after it's finished the subnodes of + the given parent, and into the subnodes of siblings of the original + node which come after it in the tree. + + Signed-off-by: David Gibson <david@gibson.dropbear.id.au> + Signed-off-by: Kumar Gala <galak@kernel.crashing.org> + +commit f242a08871839eac081ba5b599af979f3a148a0d +Author: Peter Korsgaard <jacmet@sunsite.dk> +Date: Tue Oct 28 08:26:52 2008 +0100 + + fdt_resize(): ensure minimum padding + + fdt_add_mem_rsv() requires space for a struct fdt_reserve_entry + (16 bytes), so make sure that fdt_resize at least adds that much + padding, no matter what the location or size of the fdt is. + + Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk> + Acked-by: Andy Fleming <afleming@freescale.com> + +commit d685b74c64a38849f1a129b3ab846fbf67dd937e +Author: Dave Liu <daveliu@freescale.com> +Date: Thu Oct 23 21:59:35 2008 +0800 + + 74xx: use r4 instead of r2 in lock_ram_in_cache and unlock_ram_in_cache + + The patch is following the commit 392438406041415fe64ab8748ec5ab5ad01d1cf7 + + mpc86xx: use r4 instead of r2 in lock_ram_in_cache and unlock_ram_in_cache + + This is needed in unlock_ram_in_cache() because it is called from C and + will corrupt the small data area anchor that is kept in R2. + + lock_ram_in_cache() is modified similarly as good coding practice, but + is not called from C. + + Signed-off-by: Nick Spence <nick.spence@freescale.com> + + also, the r2 is used as global data pointer. + + Signed-off-by: Dave Liu <daveliu@freescale.com> + +commit e053ab1903ccae6048ef759025b9f675bba91450 +Author: Scott Wood <scottwood@freescale.com> +Date: Tue Oct 28 11:45:04 2008 -0500 + + mpc83xx pci: Round up memory size in inbound window. + + The current calculation will fail to cover all memory if + its size is not a power of two. + + Signed-off-by: Scott Wood <scottwood@freescale.com> + Signed-off-by: Kim Phillips <kim.phillips@freescale.com> + +commit 1c671977dc81359628be27ac99c174e76e8069ba +Author: Dave Liu <daveliu@freescale.com> +Date: Thu Oct 23 21:19:13 2008 +0800 + + 86xx: remove the unused definition + + Signed-off-by: Dave Liu <daveliu@freescale.com> + +commit eaa44c5dc83756c3067b9e6c9db626facd0b0660 +Author: Dave Liu <daveliu@freescale.com> +Date: Tue Oct 28 17:47:49 2008 +0800 + + 86xx: remove the redundant r2 global data pointer save + + The commit 67256678f00c09b0a7f19e862e5c1847553d31bc add + the another global data pointer save, but in fact the + global data pointer will be initialized in the board_init_r, + so remove it such as the 85xx/83xx family. + + Signed-off-by: Dave Liu <daveliu@freescale.com> + Acked-by: Kumar Gala <kumar.gala@freescale.com> + +commit bd888e9544419665334a6f47f81f34011cea38f3 +Author: Dave Liu <daveliu@freescale.com> +Date: Tue Oct 28 17:47:41 2008 +0800 + + 86xx: remove the unused code for 86xx family + + I believe these code was copied from 74xx family, but for + 86xx, it is unused. + + Signed-off-by: Dave Liu <daveliu@freescale.com> + Acked-by: Kumar Gala <kumar.gala@freescale.com> + +commit 5ba1ef507402bc5e344dc374203792a40f222e8a +Author: Dave Liu <daveliu@freescale.com> +Date: Tue Oct 28 17:46:35 2008 +0800 + + 86xx: remove the second DDR LAW setting for mpc8641hpcn + + The DDR1 LAW will precedence the DDR2 LAW, so remove + the second DDR LAW. + + Signed-off-by: Dave Liu <daveliu@freescale.com> + Acked-by: Becky Bruce <becky.bruce@freescale.com> + +commit 137a2dfd11ac51ae3154f13f323609b33a4a072e +Author: Dave Liu <daveliu@freescale.com> +Date: Tue Oct 28 17:46:23 2008 +0800 + + 86xx: remove the unused ddr_enable_ecc in the board file + + The DDR controller of 86xx processors have the ECC data init + feature, and the new DDR code is using the feature, we don't + need the way with DMA to init memory again. + + Signed-off-by: Dave Liu <daveliu@freescale.com> + Acked-by: Kumar Gala <kumar.gala@freescale.com> + +commit dc2adad85bf580d65916c940683f6e9671e8a5dd +Author: Dave Liu <daveliu@freescale.com> +Date: Tue Oct 28 17:46:12 2008 +0800 + + 86xx: Move the clear_tlbs before MMU turn on + + We must invalidate TLBs before MMU turn on, but + currently the code is not, if there are some stale + TLB entry valid in the TLBs, it will cause strange + issue. + + Signed-off-by: Dave Liu <daveliu@freescale.com> + Acked-by: Becky Bruce <becky.bruce@freescale.com> + +commit 5cdade07b118d07154cb882650f9778cecc8a87c +Author: Scott Wood <scottwood@freescale.com> +Date: Mon Oct 27 15:57:08 2008 -0500 + + mpc8313erdb: Document NAND boot. + + Previously, the documentation claimed that NAND boot is not supported. + This is no longer true. + + Signed-off-by: Scott Wood <scottwood@freescale.com> + +commit bd78bc6b2aebf5566aac464f936b88dfd97ab0bd +Author: Scott Wood <scottwood@freescale.com> +Date: Wed Oct 29 14:20:26 2008 -0500 + + NAND: Properly create JFFS2 cleanmarkers. + + As reported by Ilko Iliev <iliev@ronetix.at>, the "nand erase clean" + command is currently broken, and among other things causes all blocks + to be marked bad. + + This implements it properly using MTD_OOB_AUTO, along with some + indentation fixes. + + Signed-off-by: Scott Wood <scottwood@freescale.com> + +commit f7fe57c09866b44692d18c8cf22828bd137ec58d +Author: Scott Wood <scottwood@freescale.com> +Date: Wed Oct 29 13:42:41 2008 -0500 + + NAND fsl elbc: Set FMR[ECCM] based on page size. + + Hardware expects ECCM 0 for small page and ECCM 1 for large page + when booting from NAND, so use those defaults. + + Signed-off-by: Scott Wood <scottwood@freescale.com> + +commit c013b74975dab0805ef6d369b013230c4e8a660d +Author: Haiying Wang <Haiying.Wang@freescale.com> +Date: Wed Oct 29 13:32:59 2008 -0400 + + NAND: Add support for MPC8572DS board + + This patch defines 1M TLB&LAW size for NAND on MPC8572DS, assigns + 0xffa00000 for CONFIG_SYS_NAND_BASE and adds other NAND supports in + config file. + + It also moves environment(CONFIG_ENV_ADDR) outside of u-boot image, to + make room for the increased code size with NAND enabled. + + Signed-off-by: Jason Jin <Jason.Jin@freescale.com> + Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com> + Signed-off-by: Scott Wood <scottwood@freescale.com> + +commit 4e190b03aaf2309bd2e025d1187a2ca880fedc95 +Author: Haiying Wang <Haiying.Wang@freescale.com> +Date: Wed Oct 29 11:05:55 2008 -0400 + + Make Freescale local bus registers available for both 83xx and 85xx. + + - Rename lbus83xx_t to fsl_lbus_t and move it to asm/fsl_lbc.h so that it + can be shared by both 83xx and 85xx + - Remove lbus83xx_t and replace it with fsl_lbus_t in all 83xx boards + files which use lbus83xx_t. + - Move FMR, FIR, FCR, FPAR, LTESR from mpc83xx.h to asm/fsl_lbc.h so that + 85xx can share them. + + Signed-off-by: Jason Jin <Jason.Jin@freescale.com> + Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com> + Signed-off-by: Scott Wood <scottwood@freescale.com> + +commit 695c130e4bf75b444720ddfd83aca88f41c046cf +Author: Scott Wood <scottwood@freescale.com> +Date: Mon Oct 27 15:38:30 2008 -0500 + + NAND: Align right column of the shorthelp with other commands. + + I accidentally broke this in when making consistent the partial + alignment of the longhelp. + + Signed-off-by: Scott Wood <scottwood@freescale.com> + +commit 33efde5ecac91ab118ff00b95a181fd6d75f8645 +Author: Karl Beldan <karl.beldan@gmail.com> +Date: Mon Sep 15 16:08:03 2008 +0200 + + NAND: Reset chip on power-up + + Some chips require a RESET after power-up (e.g. Micron MT29FxGxxxxx). + The first command sent is NAND_CMD_READID. + Issue a NAND_CMD_RESET in nand_scan_ident before reading the device id. + Tested with an MT29F4G08AAC. + + Signed-off-by: Karl Beldan <karl.beldan@gmail.com> + Signed-off-by: Scott Wood <scottwood@freescale.com> + +commit c45912d8abc52de796b9059a58faf7c4166eab58 +Author: Scott Wood <scottwood@freescale.com> +Date: Fri Oct 24 16:20:43 2008 -0500 + + NAND: sync with 2.6.27 + + This brings the core NAND code up to date with the Linux kernel. + + Since there were several drivers in Linux as of the last update that are + not in u-boot, I'm not bringing over new drivers that have been added + since in the absence of an interested party. + + I did not update OneNAND since it was recently synced by Kyungmin Park, + and I'm not sure exactly what the common ancestor is. + + Signed-off-by: Scott Wood <scottwood@freescale.com> + +commit b1d0db1805c3395149777e507b6da53410abac4e +Author: Kumar Gala <galak@kernel.crashing.org> +Date: Tue Oct 21 17:25:47 2008 -0500 + + bootm: Added CONFIG_BOOTM_{LINUX, NETBSD, RTEMS} + + Added the ability to config out bootm support for Linux, NetBSD, RTEMS + + Signed-off-by: Kumar Gala <galak@kernel.crashing.org> + +commit 5a98127d81a6eefc5a78a704df619bfe362eeb87 +Author: Kumar Gala <galak@kernel.crashing.org> +Date: Tue Oct 21 17:25:46 2008 -0500 + + bootm: support subcommands in linux ppc bootm + + Add support for 'bdt', 'cmdline', 'prep' to the linux PPC bootm. + + Signed-off-by: Kumar Gala <galak@kernel.crashing.org> + +commit 49c3a861d11735838f1f1b11999ce433006dc919 +Author: Kumar Gala <galak@kernel.crashing.org> +Date: Tue Oct 21 17:25:45 2008 -0500 + + bootm: Add subcommands + + Add the ability to break the steps of the bootm command into several + subcommands: start, loados, ramdisk, fdt, bdt, cmdline, prep, go. + + This allows us to do things like manipulate device trees before + they are passed to a booting kernel or setup memory for a secondary + core in multicore situations. + + Not all OS types support all subcommands (currently only start, loados, + ramdisk, fdt, and go are supported). + + Signed-off-by: Kumar Gala <galak@kernel.crashing.org> + +commit be08315933537f061bc1ce61f33a29c56458bbad +Author: Kumar Gala <galak@kernel.crashing.org> +Date: Tue Oct 21 17:25:44 2008 -0500 + + bootm: Move to using a function pointer table for the boot os function + + This removes a bit of code and makes it easier for the upcoming sub bootm + command support to call into the proper OS specific handler. + + Signed-off-by: Kumar Gala <galak@kernel.crashing.org> + Signed-off-by: Wolfgang Denk <wd@denx.de> + +commit a369f4a492fa2805d87775d27380f0eeaca35aa6 +Author: Graeme Russ <graeme.russ@gmail.com> +Date: Mon Sep 29 23:03:14 2008 +1000 + + i386: Renamed show_boot_progress in assembler code + + Renamed show_boot_progress in assembler init phase to + show_boot_progress_asm to avoid link conflicts with C version + + Signed-off-by: Graeme Russ <graeme.russ@gmail.com> + +commit 4442f45b0e1cbad35aa22d4cad22b90a57e3f32d +Author: Peter Tyser <ptyser@xes-inc.com> +Date: Mon Oct 27 16:42:00 2008 -0500 + + 85xx: Update MPC85xx_PORDEVSR_IO_SEL mask + + The MPC8572 has a 4-bit wide PORDEVSR IO_SEL field. Other MPC85xx + processors have a 3-bit wide IO_SEL field but have the most + significant bit is wired to 0 so this change should not affect + them. + + Signed-off-by: Peter Tyser <ptyser@xes-inc.com> + +commit cd4251624205cb97104f6e32679dc7754934f711 +Author: Becky Bruce <becky.bruce@freescale.com> +Date: Mon Oct 27 16:09:42 2008 -0500 + + powerpc: fix pci window initialization to work with > 4GB DRAM + + The existing code has a few errors that need to be fixed in + order to support large RAM sizes. Fix those, and add a + comment to make it clearer. + + Signed-off-by: Becky Bruce <becky.bruce@freescale.com> + Acked-by: Kumar Gala <galak@kernel.crashing.org> + +commit 219542a1a66ca017b12860920714a9859b18a5d7 +Author: Kumar Gala <galak@kernel.crashing.org> +Date: Mon Oct 27 13:16:20 2008 -0500 + + pci/fsl_pci_init: Removed a bunch pointless trailing backslashes. + + Signed-off-by: Kumar Gala <galak@kernel.crashing.org> + +commit 6b59e03e0237a40a2305ea385defdfd92000978b +Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com> +Date: Mon Sep 1 16:21:22 2008 +0200 + + lcd: Let the board code show board-specific info + + The information displayed when CONFIG_LCD_INFO is set is inherently + board-specific, so it should be done by the board code. The current code + dealing with this only handles two cases, and is already a horrible mess + of #ifdeffery. + + Yes, this duplicates some code, but it also allows boards to print more + board-specific information; this used to be very difficult. + + Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com> + Signed-off-by: Anatolij Gustschin <agust@denx.de> + +commit 6f93d2b8fca504200a5758f7c6dd2d6852900765 +Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com> +Date: Mon Sep 1 16:21:21 2008 +0200 + + lcd: Set lcd_is_enabled before clearing the screen + + This allows the logo/info rendering routines to use the regular + lcd_putc/lcd_puts/lcd_printf calls. + + Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com> + Signed-off-by: Anatolij Gustschin <agust@denx.de> + +commit 15b17ab52b7c15d46d9fc631cc06092e1e764de2 +Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com> +Date: Mon Sep 1 16:21:20 2008 +0200 + + lcd: Implement lcd_printf() + + lcd_printf() has a prototype in include/lcd.h but no implementation. Fix + this by borrowing the lcd_printf() implementation from the cogent board + code (which appears to use its own LCD framework.) + + Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com> + Signed-off-by: Anatolij Gustschin <agust@denx.de> + +commit 70dbc54c0a5c798bcf82ae2a1e227404f412e892 +Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com> +Date: Mon Sep 1 16:21:19 2008 +0200 + + atmel_lcdfb: Straighten out funky vl_sync logic + + If the board _didn't_ request INVLINE_INVERTED, we set INVLINE_INVERTED, + otherwise we don't. WTF? + + Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com> + Signed-off-by: Anatolij Gustschin <agust@denx.de> + +commit 23bb28f0f76b46c4b573374b0bb3b3f23d85ef55 +Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com> +Date: Mon Sep 1 16:21:18 2008 +0200 + + atmel_lcdfb: Eliminate unneeded #include <asm/arch/hardware.h> + + atmel_lcdfb doesn't actually need anything from asm/arch/hardware.h. It + includes a file that does, asm/arch/gpio.h, but this file doesn't + include <asm/arch/hardware.h> like it's supposed to. + + Add the missing include to asm/arch/gpio.h and remove the workaround + from the atmel_lcdfb driver. This makes the driver compile on avr32. + + Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com> + Signed-off-by: Anatolij Gustschin <agust@denx.de> + +commit c2083e0e11a03ef8be2e9f0ed8720fdc20832f3e +Author: Kumar Gala <galak@kernel.crashing.org> +Date: Wed Oct 22 14:38:55 2008 -0500 + + 86xx: Convert all fsl_pci_init users to new APIs + + Converted MPC8610HCPD, MPC8641HPCN, and SBC8641D to use + fsl_pci_setup_inbound_windows() and ft_fsl_pci_setup(). + + With these changes the board code is a bit smaller and we get dma-ranges + set in the device tree for these boards. + + Signed-off-by: Kumar Gala <galak@kernel.crashing.org> + Signed-off-by: Andrew Fleming-AFLEMING <afleming@freescale.com> + Acked-by: Jon Loeliger <jdl@freescale.com> + +commit 2dba0dea98c0dee1799ffd6fd6eb541645dbbd98 +Author: Kumar Gala <galak@kernel.crashing.org> +Date: Tue Oct 21 08:28:33 2008 -0500 + + 85xx: Convert all fsl_pci_init users to new APIs + + Converted ATUM8548, MPC8536DS, MPC8544DS, MPC8548CDS, MPC8568MDS, + MPC8572DS, TQM85xx, and SBC8548 to use fsl_pci_setup_inbound_windows() + and ft_fsl_pci_setup(). + + With these changes the board code is a bit smaller and we get dma-ranges + set in the device tree for these boards. + + Signed-off-by: Kumar Gala <galak@kernel.crashing.org> + Signed-off-by: Andrew Fleming-AFLEMING <afleming@freescale.com> + +commit a2aab460727e5f674353a83a81000ef794bffcae +Author: Kumar Gala <galak@kernel.crashing.org> +Date: Thu Oct 23 00:01:06 2008 -0500 + + pci/fsl_pci_init: Added fdt helper for setting up bus-ranges & dma-ranges + + Signed-off-by: Kumar Gala <galak@kernel.crashing.org> + Signed-off-by: Andrew Fleming-AFLEMING <afleming@freescale.com> + +commit b9a1fa9787a3a79573f5f932a4f8aa216bcb1785 +Author: Kumar Gala <galak@kernel.crashing.org> +Date: Wed Oct 22 14:06:24 2008 -0500 + + pci/fsl_pci_init: Add a common PCI inbound setup function + + Add a common setup function that determines the pci_region(s) based + on how much memory we have in the system. + + Signed-off-by: Kumar Gala <galak@kernel.crashing.org> + Signed-off-by: Andrew Fleming-AFLEMING <afleming@freescale.com> + +commit 612ea01018a459234d54ed57ec6a5a244ce75678 +Author: Kumar Gala <galak@kernel.crashing.org> +Date: Tue Oct 21 10:13:14 2008 -0500 + + pci/fsl_pci_init: Enable larger address and setting inbound windows properly + + * PCI Inbound window was setup incorrectly. The PCI address and system + address were swapped. The PCI address should be setting piwar/piwbear + and the system address should be setting pitar. + + * Removed masking of addresses to allow for system address to support + system address & PCI address >32-bits + + * Set PIWBEAR & POTEAR to allow for full 64-bit PCI addresses + + * Respect the PCI_REGION_PREFETCH for inbound windows + + Signed-off-by: Kumar Gala <galak@kernel.crashing.org> + Signed-off-by: Andrew Fleming-AFLEMING <afleming@freescale.com> + +commit 8ab451c46b846f2bbd7122b29ffdd9a4a04da228 +Author: Kumar Gala <galak@kernel.crashing.org> +Date: Wed Oct 22 23:33:56 2008 -0500 + + fdt: Added helper to set PCI dma-ranges property + + Added fdt_pci_dma_ranges() that parses the pci_region info from the + struct pci_controller and populates the dma-ranges based on it. + + The max # of windws/dma-ranges we support is 3 since on embedded + PowerPC based systems this is the max number of windows. + + Signed-off-by: Kumar Gala <galak@kernel.crashing.org> + Signed-off-by: Andrew Fleming-AFLEMING <afleming@freescale.com> + +commit 3bed2aaf2d50fd13273c14d17d4fd40ef42e0d0f +Author: Kumar Gala <galak@kernel.crashing.org> +Date: Thu Oct 23 00:05:47 2008 -0500 + + fdt: Add fdt_getprop_u32_default helpers + + Add helper functions to return find a node and return it's property + or a default value. + + Signed-off-by: Kumar Gala <galak@kernel.crashing.org> + Signed-off-by: Andrew Fleming-AFLEMING <afleming@freescale.com> + Acked-by: Gerald Van Baren <vanbaren@cideas.com> + +commit 8ba93f68a1bae89e033527ce67b41b4a87aa5b7f +Author: Kumar Gala <galak@kernel.crashing.org> +Date: Tue Oct 21 18:06:15 2008 -0500 + + 86xx: Enable 64-bit PCI resources on all Freescale boards + + Signed-off-by: Kumar Gala <galak@kernel.crashing.org> + Signed-off-by: Andrew Fleming-AFLEMING <afleming@freescale.com> + +commit 0151cbaccf4504821ecfde0217299bd740086bb6 +Author: Kumar Gala <galak@kernel.crashing.org> +Date: Tue Oct 21 11:33:58 2008 -0500 + + 85xx: Enable 64-bit PCI resources on all Freescale boards + + Signed-off-by: Kumar Gala <galak@kernel.crashing.org> + Signed-off-by: Andrew Fleming-AFLEMING <afleming@freescale.com> + +commit 30e76d5e3bc4c5208ee63585fe12b409d9308cd8 +Author: Kumar Gala <galak@kernel.crashing.org> +Date: Tue Oct 21 08:36:08 2008 -0500 + + pci: Allow for PCI addresses to be 64-bit + + PCI bus is inherently 64-bit. While not all system require access to + the full 64-bit PCI address range some do. This allows those systems + to enable the full PCI address width via CONFIG_SYS_PCI_64BIT. + + Signed-off-by: Kumar Gala <galak@kernel.crashing.org> + Signed-off-by: Andrew Fleming-AFLEMING <afleming@freescale.com> + Acked-by: Wolfgang Denk <wd@denx.de> + +commit ae5f943ba8ede448a4b1a145fd8911856701ecc5 +Author: Dave Liu <daveliu@freescale.com> +Date: Thu Oct 23 21:18:53 2008 +0800 + + 85xx: Fix the incorrect register used for DDR erratum1 + + The 8572 DDR erratum1: + DDR controller may enter an illegal state when operating + in 32-bit bus mode with 4-beat bursts. + + Description: + When operating with a 32-bit bus, it is recommended that + DDR_SDRAM_CFG[8_BE] is cleared when DDR2 memories are used. + This forces the DDR controller to use 4-beat bursts when + communicating to the DRAMs. However, an issue exists that + could lead to data corruption when the DDR controller is + in 32-bit bus mode while using 4-beat bursts. + + Projected Impact: + If the DDR controller is operating in 32-bit bus mode with + 4-beat bursts, then the controller may enter into a bad state. + All subsequent reads from memory is corrupted. + Four-beat bursts with a 32-bit bus only is used with DDR2 memories. + Therefore, this erratum does not affect DDR3 mode. + + Work Arounds: + To work around this issue, software must set DEBUG_1[31] in + DDR memory mapped space (CCSRBAR offset + 0x2f00 for DDR_1 + and CCSRBAR offset + 0x6f00 for DDR_2). + + Currenlty, the code is using incorrect register DDR_SDRAM_CFG_2 + as condition, but it should be DDR_SDRAM_CFG register. + + Signed-off-by: Dave Liu <daveliu@freescale.com> + +commit d5b693090ed08d24c18491df9d8fc7387b2906f3 +Author: Dave Liu <daveliu@freescale.com> +Date: Thu Oct 23 21:17:19 2008 +0800 + + 85xx: remove unused config definition + + Signed-off-by: Dave Liu <daveliu@freescale.com> + +commit 0f060c3bf82832331a509f2e5d2442539e7aad09 +Author: Kumar Gala <galak@kernel.crashing.org> +Date: Thu Oct 23 01:47:38 2008 -0500 + + 85xx: Add basic e500mc core support + + Introduce CONFIG_E500MC to deal with the minor differences between + e500v2 and e500mc. + + * Certain fields of HID0/1 don't exist anymore on e500mc + * Cache line size is 64-bytes on e500mc + * reset value of PIR is different + + Signed-off-by: Kumar Gala <galak@kernel.crashing.org> + +commit a38a5b6edd30f29fd5fdb1d7f674521906c0e677 +Author: Kumar Gala <galak@kernel.crashing.org> +Date: Thu Oct 23 01:47:37 2008 -0500 + + 85xx: Use CONFIG_SYS_CACHELINE_SIZE instead of magic number + + Using CONFIG_SYS_CACHELINE_SIZE instead of 31 means we can handle + e500mc's 64-byte cacheline properly when it gets added. + + Signed-off-by: Kumar Gala <galak@kernel.crashing.org> + +commit 5deb8022c3749faac30e9ad9694691e2442b5c93 +Author: Georg Schardt <schardt@team-ctech.de> +Date: Fri Oct 24 13:51:52 2008 +0200 + + ppc4xx: New board avnet fx12 minimodul + + This patch adds support for the avnet fx12 minimodul. + It needs the "ppc4xx: Generic architecture for xilinx ppc405" + patch from Ricardo. + + Signed-off-by: Georg Schardt <schardt@team-ctech.de> + Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es> + Signed-off-by: Stefan Roese <sr@denx.de> + +commit 1f4d53260ec6f8f122aed75cce7c757d97a551e0 +Author: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es> +Date: Tue Oct 21 18:29:46 2008 +0200 + + ppc4xx: Generic architecture for xilinx ppc405(v3) + + As "ppc44x: Unification of virtex5 pp440 boards" did for the xilinx + ppc440 boards, this patch presents a common architecture for all the + xilinx ppc405 boards. + + Any custom xilinx ppc405 board can be added very easily with no code + duplicity. + + This patch also adds a simple generic board, that can be used on almost + any design with xilinx ppc405 replacing the file ppc405-generic/xparameters.h + + This patch is prepared to work with the latest version of EDK (10.1) + + Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es> + Signed-off-by: Stefan Roese <sr@denx.de> + +commit 485c00a57fab86f72a3769480c66bf1ca22e1459 +Author: Stefan Roese <sr@denx.de> +Date: Fri Oct 24 08:56:09 2008 +0200 + + ppc4xx: Disable DDR2 autocalibration on Kilauea for now + + Since the new autocalibration still has some problems on some Kilauea + boards with 200MHz DDR2 frequency we disable the autocalibration and + use the hardcoded values as done before. This seems to work reliably + on all known DDR2 frequencies. + + After the autocalibration issue is fixed we will enable it again. + + Signed-off-by: Stefan Roese <sr@denx.de> + +commit f177f4250c729727b1629fa8d8d6556c999e9b8c +Author: Mike Frysinger <vapier@gentoo.org> +Date: Wed Apr 9 02:02:07 2008 -0400 + + Blackfin: fix up UART status bit handling + + Some Blackfin UARTs are read-to-clear while others are write-to-clear. + This can cause problems when we poll the LSR and then later try and handle + any errors detected. + + Signed-off-by: Mike Frysinger <vapier@gentoo.org> + +commit ae0910298f31f5bb3d33a64b8467c60ea3c5d6d0 +Author: Mike Frysinger <vapier@gentoo.org> +Date: Sat Oct 11 20:42:17 2008 -0400 + + Blackfin: bf561-ezkit: drop redundant code + + Common Blackfin code already announces CPU information. + + Signed-off-by: Mike Frysinger <vapier@gentoo.org> + +commit e2eea98bff1369f77a9f59a5fd0bd4928bc3332e +Author: Mike Frysinger <vapier@gentoo.org> +Date: Sat Oct 11 20:43:10 2008 -0400 + + Blackfin: bf561-ezkit: drop pointless USB code + + The USB/LAN register settings are not actually used/needed in order to + drive things from U-Boot, so drop the code. + + Signed-off-by: Mike Frysinger <vapier@gentoo.org> + +commit c23bff63fb03cb9dbcd26522841e53f9b34fa1ab +Author: Mike Frysinger <vapier@gentoo.org> +Date: Sat Oct 11 20:47:58 2008 -0400 + + Blackfin: linker scripts: force start.o and set initcode boundaries + + Make sure that the start.o object is always the first object in our linker + script regardless of configuration settings, and add some linker symbols + so the ldr utility can properly locate the initcode when generating a LDR. + + Signed-off-by: Mike Frysinger <vapier@gentoo.org> + +commit bd33e5c613cf70e3cb51a73fdd653fe83b942bb0 +Author: Mike Frysinger <vapier@gentoo.org> +Date: Sat Oct 11 21:19:39 2008 -0400 + + Blackfin: small cpu init optimization while setting interrupt mask + + Use the sti instruction to set the initial interrupt mask rather than + banging on the core IMASK MMR to save both space and time. + + Signed-off-by: Mike Frysinger <vapier@gentoo.org> + +commit 960922291c9594acb575cec7e47d7bed9b58182c +Author: Mike Frysinger <vapier@gentoo.org> +Date: Sat Oct 11 21:18:10 2008 -0400 + + Blackfin: set initial stack correctly according to Blackfin ABI + + Signed-off-by: Mike Frysinger <vapier@gentoo.org> + +commit 25cd33d82ea521b7bd90ca858f8919fae1e9732b +Author: Mike Frysinger <vapier@gentoo.org> +Date: Sun Apr 20 03:11:53 2008 -0400 + + Blackfin: make baud calculation more accurate + + We should use the algorithm in the Linux kernel so that the UART divisor + calculation is more accurate. It also fixes problems on some picky UARTs + that have sampling anomalies. + + Signed-off-by: Mike Frysinger <vapier@gentoo.org> + +commit 0ba1da116e5edcb0c5ae4a7585d73f6548400a06 +Author: Mike Frysinger <vapier@gentoo.org> +Date: Mon Oct 6 04:21:41 2008 -0400 + + Blackfin: decode hwerrcause/excause when crashing + + Having to decode hwerrcause/excause values is a pain, so automate it. + + Signed-off-by: Mike Frysinger <vapier@gentoo.org> + +commit 2de95bb20c488f20298df6881b700a5a757ee780 +Author: Mike Frysinger <vapier@gentoo.org> +Date: Mon Oct 6 04:20:54 2008 -0400 + + Blackfin: fix register dump messages + + Make sure we report RETI/IPEND correctly. + + Signed-off-by: Mike Frysinger <vapier@gentoo.org> + +commit 7133999e6f62a9a01f6a8ffe234b8532b3ad1e4b +Author: Mike Frysinger <vapier@gentoo.org> +Date: Mon Oct 6 04:19:34 2008 -0400 + + Blackfin: don't bother displaying reboot msg when crashing + + The hang function already tells you to reboot, so no point in showing it + twice. + + Signed-off-by: Mike Frysinger <vapier@gentoo.org> + +commit 70c4c032ea112cc42aa1ce959c33fc4825eaef95 +Author: Mike Frysinger <vapier@gentoo.org> +Date: Sun Jun 1 01:23:48 2008 -0400 + + Blackfin: enable support for nested interrupts + + During cpu init, make sure we initialize the CEC properly so that + interrupts can fire and be handled while U-Boot is running. + + Signed-off-by: Mike Frysinger <vapier@gentoo.org> + +commit 39782727e185860faa4884c2b04e84cb33d1c6cf +Author: Mike Frysinger <vapier@gentoo.org> +Date: Mon Oct 6 03:55:25 2008 -0400 + + Blackfin: init NAND before relocating env + + If booting out of NAND, we need to make sure we initialize it properly + before attempting to relocate the environment. + + Signed-off-by: Mike Frysinger <vapier@gentoo.org> + +commit 0f9a8819416ba40a53de50af148847a0e508f84d +Author: Mike Frysinger <vapier@gentoo.org> +Date: Thu Aug 7 18:40:13 2008 -0400 + + Blackfin: check cache bits, not cplb bits + + Signed-off-by: Mike Frysinger <vapier@gentoo.org> + +commit 2c1ea9e370cb72dd6a5aa32338e87a8a1f77bd76 +Author: Mike Frysinger <vapier@gentoo.org> +Date: Thu Aug 7 17:52:59 2008 -0400 + + Blackfin: drop unused cache flush code + + Signed-off-by: Mike Frysinger <vapier@gentoo.org> + +commit 50f0d211912a648e31aa9123b4665a0444bb8ca9 +Author: Mike Frysinger <vapier@gentoo.org> +Date: Thu Aug 7 15:21:47 2008 -0400 + + Blackfin: unify cache handling code + + Signed-off-by: Mike Frysinger <vapier@gentoo.org> + +commit 3c8798983403cb68a827d7a0d09b1134524a1b7d +Author: Mike Frysinger <vapier@gentoo.org> +Date: Mon Oct 6 03:39:07 2008 -0400 + + Blackfin: only initialize the RTC when actually used + + Signed-off-by: Mike Frysinger <vapier@gentoo.org> + +commit 621e579b812dd1a2e6777f7cbf6e55e736505823 +Author: Mike Frysinger <vapier@gentoo.org> +Date: Mon Oct 6 03:44:33 2008 -0400 + + Blackfin: fix SWRST register definition + + The SWRST register is a 16bit, not 32bit, register. + + Signed-off-by: Mike Frysinger <vapier@gentoo.org> + +commit 06121c4e2d183887dcd7a4ca2dcd395b213ea15b +Author: Mike Frysinger <vapier@gentoo.org> +Date: Thu Aug 7 18:54:57 2008 -0400 + + Blackfin: build with -fomit-frame-pointer + + Signed-off-by: Mike Frysinger <vapier@gentoo.org> + +commit adbfeeb7b32f737a9738daa583350d2bb9ed017a +Author: Mike Frysinger <vapier@gentoo.org> +Date: Thu Aug 7 17:50:26 2008 -0400 + + Blackfin: document some of the blackfin directories + + Signed-off-by: Mike Frysinger <vapier@gentoo.org> + +commit e4337968e43698a68ba608369f46d4a4114111ca +Author: Mike Frysinger <vapier@gentoo.org> +Date: Thu Aug 7 15:16:56 2008 -0400 + + Blackfin: only enable hardware error irq by default + + Signed-off-by: Mike Frysinger <vapier@gentoo.org> + +commit 2b66f08f257ef6a06785f27b3c6dc2a4cfc9cac4 +Author: Mike Frysinger <vapier@gentoo.org> +Date: Thu Aug 7 13:36:43 2008 -0400 + + Blackfin: punt old unused mem_init.h header + + Signed-off-by: Mike Frysinger <vapier@gentoo.org> + +commit bcc121a01608042066a19ab5bff5bcfb805bf406 +Author: Mike Frysinger <vapier@gentoo.org> +Date: Thu Aug 7 13:18:55 2008 -0400 + + Blackfin: delete unused page_descriptor_table_size define + + Signed-off-by: Mike Frysinger <vapier@gentoo.org> + +commit 30fb9d24ae16e5b0ed39e5b7cc85981165ca98bc +Author: Mike Frysinger <vapier@gentoo.org> +Date: Thu Aug 7 13:17:03 2008 -0400 + + Blackfin: fix typo in boot mode comment and add NAND define + + Signed-off-by: Mike Frysinger <vapier@gentoo.org> + +commit 2e5cbe5461c5c4c6665e318cfe950a5a150d999c +Author: Ben Maan <moo@cow> +Date: Thu Aug 7 13:14:21 2008 -0400 + + Blackfin: fix port mux defines for BF54x + + Signed-off-by: Mike Frysinger <vapier@gentoo.org> + +commit 0656ef2ba274910d31364fe022f6c7db0051660d +Author: Mike Frysinger <vapier@gentoo.org> +Date: Thu Aug 7 13:09:50 2008 -0400 + + Blackfin: update anomaly lists + + Signed-off-by: Mike Frysinger <vapier@gentoo.org> + +commit 50ca95402876cf7bac4e2d4f7855f616a038763f +Author: Mike Frysinger <vapier@gentoo.org> +Date: Thu Aug 7 13:08:54 2008 -0400 + + Blackfin: unify DSPID/DBGSTAT MMR definitions + + Signed-off-by: Mike Frysinger <vapier@gentoo.org> + +commit d9d8c7c696dec370ca714c03beb6e79d4c90bd5e +Author: Wolfgang Denk <wd@denx.de> +Date: Tue Oct 21 15:53:51 2008 +0200 + + Fix strmhz(): avoid printing negative fractions + + Signed-off-by: Wolfgang Denk <wd@denx.de> + +commit 4a7f6b750d8de543fdf8e58acd86745010054571 +Author: Richard Retanubun <RichardRetanubun@ruggedcom.com> +Date: Fri Oct 17 08:55:51 2008 -0400 + + mpc83xx: Removed #ifdef CONFIG_MPC834X dependency on upmconfig function + + This is done to allow other 83XX based platforms which also have UPM + (e.g. 8360) to configure and use their UPM in u-boot. + + Signed-off-by: Richard Retanubun <RichardRetanubun@RuggedCom.com> + Signed-off-by: Kim Phillips <kim.phillips@freescale.com> + +commit 3bf1be3c0cfb1129b68cc1474119e5f323536488 +Author: Anton Vorontsov <avorontsov@ru.mvista.com> +Date: Tue Oct 14 22:58:53 2008 +0400 + + mpc83xx: add support for switching between USB Host/Function for MPC837XEMDS + + With this patch u-boot can fixup the dr_mode and phy_type properties + for the Dual-Role USB controller. + + While at it, also remove #ifdefs around includes, they are not needed. + + Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> + Signed-off-by: Kim Phillips <kim.phillips@freescale.com> + +commit b3379f3fd13969934c00097c05754e7a8990fd39 +Author: Anton Vorontsov <avorontsov@ru.mvista.com> +Date: Wed Oct 8 20:52:54 2008 +0400 + + mpc83xx: add ELBC NAND support for the MPC837XEMDS boards + + Though NAND chip is replaceable on the MPC837XE-MDS boards, the + current settings don't work with the default chip on the board. + Nevertheless Freescale's U-Boot sets the option register correctly, + so I just dumped the register from the working u-boot. My guess is + that the old settings were applicable for some pilot boards, not + found in the production. + + This patch also enables FSL ELBC driver so that we could access + the NAND storage in the u-boot. + + The NAND support costs about 45KB, so the u-boot no longer fits + into two 128KB NOR flash sectors, thus we also have to adjust + environment location: add another 128KB to the monitor length. + + Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> + + It is due to hardware design and logic defect, that is the + I/O[0:7] of NAND chip is connected to LAD[7:0], so when + the NAND chip connected to nLCS3, you have to set up the + OR3[BCTLD] = '1' for normal operation, otherwise it will have + bus contention due to the pin 48/25 of U60 is enabled. + + Setup the OR3[BCTLD] = '1' , that meaning the LBCTL is not + asserted upon access to the NAND chip, keep the default state. + + Acked-by: Dave Liu <daveliu@freescale.com> + Signed-off-by: Kim Phillips <kim.phillips@freescale.com> + +commit 00f7bbae92e3b13f2b37aeb1def9bb12445521b7 +Author: Anton Vorontsov <avorontsov@ru.mvista.com> +Date: Thu Oct 2 19:17:33 2008 +0400 + + mpc83xx: fix PCI scan hang on the standalone MPC837xE-MDS boards + + The MPC837xE-MDS board's CPLD can auto-detect if the board is on the PIB, + standalone or acting as a PCI agent. User's Guide says: + + - When the CPLD recognizes its location on the PIB it automatically + configures RCW to the PCI Host. + - If the CPLD fails to recognize its location then it is automatically + configured as an Agent and the PCI is configured to an external arbiter. + + This sounds good. Though in the standalone setup the CPLD sets PCI_HOST + flag (it's ok, we can't act as PCI agents since we receive CLKIN, not + PCICLK), but the CPLD doesn't set the ARBITER_ENABLE flag, and without + any arbiter bad things will happen (here the board hangs during any config + space reads). + + In this situation we must disable the PCI. And in case of anybody really + want to use an external arbiter, we provide "pci_external_aribter" + environment variable. + + Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> + Signed-off-by: Kim Phillips <kim.phillips@freescale.com> + +commit 1da83a63d8e1b4bddeb82581b1745a09aac3e2d3 +Author: Anton Vorontsov <avorontsov@ru.mvista.com> +Date: Thu Oct 2 18:32:25 2008 +0400 + + mpc83xx: add SGMII riser module support for the MPC8378E-MDS boards + + This involves configuring the SerDes and fixing up the flags and + PHY addresses for the TSECs. + + For Linux we also fix up the device tree. + + Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> + Signed-off-by: Kim Phillips <kim.phillips@freescale.com> + +commit e6d9c8916de9c24f2c52d0b01cf00d2e74a04cd8 +Author: Anton Vorontsov <avorontsov@ru.mvista.com> +Date: Thu Oct 2 18:31:59 2008 +0400 + + mpc83xx: add TSECs' HRCWH masks for MPC837x processors + + We'll use these masks to parse TSEC modes out of HRCWH. + + Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> + Signed-off-by: Kim Phillips <kim.phillips@freescale.com> + +commit 6f9cc6608b4e1cefde56c0fb99ae1c95c42575ff +Author: Anton Vorontsov <avorontsov@ru.mvista.com> +Date: Thu Oct 2 18:31:56 2008 +0400 + + mpc83xx: serdes: add forgotten shifts for rfcks + + The rfcks should be shifted by 28 bits left. We didn't notice the bug + because we were using only 100MHz clocks (for which rfcks == 0). + + Though, for SGMII we'll need 125MHz clocks. + + Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> + Signed-off-by: Kim Phillips <kim.phillips@freescale.com> + +commit 55c531984dcf933e4cd13a187a7e08e873b7ced1 +Author: Anton Vorontsov <avorontsov@ru.mvista.com> +Date: Thu Oct 2 18:31:53 2008 +0400 + + mpc83xx: fix serdes setup for the MPC8378E boards + + MPC837xE specs says that SerDes1 has: + + — Two lanes running x1 SGMII at 1.25 Gbps; + — Two lanes running x1 SATA at 1.5 or 3.0 Gbps. + + And for SerDes2: + + — Two lanes running x1 PCI Express at 2.5 Gbps; + — One lane running x2 PCI Express at 2.5 Gbps; + — Two lanes running x1 SATA at 1.5 or 3.0 Gbps. + + The spec also explicitly states that PEX options are not valid for + the SD1. + + Nevertheless MPC8378 RDB and MDS boards configure the SD1 for PEX, + which is wrong to do. + + Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> + Signed-off-by: Kim Phillips <kim.phillips@freescale.com> + +commit 5c2ff323a94e27e481f70c44838d43fcd844dd46 +Author: Anton Vorontsov <avorontsov@ru.mvista.com> +Date: Wed Sep 10 18:12:37 2008 +0400 + + mpc83xx: mpc8360emds: rework LBC SDRAM setup + + Currently 64M of LBC SDRAM are mapped at 0xF0000000 which makes + it difficult to use (b/c then the memory is discontinuous and + there is quite big memory hole between the DDR/SDRAM regions). + + This patch reworks LBC SDRAM setup so that now we dynamically + place the LBC SDRAM near the DDR (or at 0x0 if there isn't any + DDR memory). + + With this patch we're able to: + + - Boot without external DDR memory; + - Use most "DDR + SDRAM" setups without need to support for + sparse/discontinuous memory model in the software. + + Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> + Signed-off-by: Kim Phillips <kim.phillips@freescale.com> + +commit def0819e920b05b34b56d8b42e1e43d9b89a52d6 +Author: Wolfgang Denk <wd@xpert.denx.de> +Date: Tue Oct 21 11:23:56 2008 +0200 + + FDT: don't use private kernel header files + + On some systems (for example Fedora Core 4) U-Boot builds with the + following wanrings only: + + ... + In file included from /home/wd/git/u-boot/include/libfdt_env.h:33, + from fdt.c:51: + /usr/include/asm/byteorder.h:6:2: warning: #warning using private kernel header; include <endian.h> instead! + + This patch fixes this problem. + + Signed-off-by: Wolfgang Denk <wd@denx.de> + +commit f4d14c55504ce40287321bd63ee269e3233ee4ae +Author: Stefan Roese <sr@denx.de> +Date: Mon Oct 13 15:15:31 2008 +0200 + + ppc4xx: Add 1.0 & 1.066 GHz to canyonlands bootstrap command for PLL setup + + Signed-off-by: Stefan Roese <sr@denx.de> + +commit 43cbce69d48d052574d71f50724be546d90a46a4 +Author: Stefan Roese <sr@denx.de> +Date: Mon Oct 13 10:45:14 2008 +0200 + + ppc4xx: Correctly setup ranges property in ebc node + + Previously only the NOR flash mapping was written into the ranges + property of the ebc node. This patch now writes all enabled chip + select areas into the ranges property. + + Signed-off-by: Stefan Roese <sr@denx.de> + +commit d7b26d58328f137471ea97de382bfa63f7239931 +Author: Dirk Eibach <eibach@gdsys.de> +Date: Wed Oct 8 15:37:50 2008 +0200 + + ppc4xx: Add GDSys neo 405EP board support + + Signed-off-by: Dirk Eibach <eibach@gdsys.de> + Signed-off-by: Stefan Roese <sr@denx.de> + +commit c11da194545d2f4bbb54be1bb5e504e20ce8c16c +Author: Niklaus Giger <niklaus.giger@netstal.com> +Date: Wed Oct 1 14:46:13 2008 +0200 + + ppc4xx: Update configs for Netstal boards + + I reorganized my config files, putting the common stuff into netstal-common.h + (got the idea by looking a amcc-common.h from Stefan). + + Added stuff to boot the new powerpc linux via NFS (only tested with HCU4). + + Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com> + Signed-off-by: Stefan Roese <sr@denx.de> + +commit c9c11d751e4242cf29c3c3c290d971f6d0cb1d15 +Author: Adam Graham <agraham@amcc.com> +Date: Wed Oct 8 10:13:19 2008 -0700 + + ppc4xx: Add routine to retrieve CPU number + + Provide a weak defined routine to retrieve the CPU number for + reference boards that have multiple CPU's. Default behavior + is the existing single CPU print output. Reference boards with + multiple CPU's need to provide a board specific routine. + See board/amcc/arches/arches.c for an example. + + Signed-off-by: Adam Graham <agraham@amcc.com> + Signed-off-by: Victor Gallardo <vgallardo@amcc.com> + Signed-off-by: Stefan Roese <sr@denx.de> + +commit 59217bae40e90982ab5400d849c08af683ace036 +Author: Adam Graham <agraham@amcc.com> +Date: Wed Oct 8 10:13:14 2008 -0700 + + ppc4xx: Add static support for 44x IBM SDRAM Controller + + This patch add the capability to configure a PPC440 based IBM SDRAM + Controller with static, compiled-in, values. PPC440 memory subsystem + includes a Memory Queue core. + + Signed-off-by: Adam Graham <agraham@amcc.com> + Signed-off-by: Victor Gallardo <vgallardo@amcc.com> + Signed-off-by: Stefan Roese <sr@denx.de> + +commit f09f09d3899017aaaa2b031bba63c271e9c48e4d +Author: Adam Graham <agraham@amcc.com> +Date: Wed Oct 8 10:12:53 2008 -0700 + + ppc4xx: Add AMCC Arches board support (dual 460GT) + + The Arches Evaluation board is based on the AMCC 460GT SoC chip. + This board is a dual processor board with each processor providing + independent resources for Rapid IO, Gigabit Ethernet, and serial + communications. Each 460GT has it's own 512MB DDR2 memory, 32MB NOR + FLASH, UART, EEPROM and temperature sensor, along with a shared debug + port. The two 460GT's will communicate with each other via shared + memory, Gigabit Ethernet and x1 PCI-Express. + + Signed-off-by: Adam Graham <agraham@amcc.com> + Signed-off-by: Victor Gallardo <vgallardo@amcc.com> + Signed-off-by: Stefan Roese <sr@denx.de> + +commit 055b12f2ffd7c34eea7e983a0588b24f2e69e0e3 +Author: Wolfgang Denk <wd@xpert.denx.de> +Date: Sun Oct 19 21:54:30 2008 +0200 + + TQM8260: environment in flash instead EEPROM, baudrate 115k + + Several customers have reported problems with the environment in + EEPROM, including corrupted content after board reset. Probably the + code to prevent I2C Enge Conditions is not working sufficiently. + + We move the environment to flash now, which allows to have a backup + copy plus gives much faster boot times. + + Also, change the default console initialization to 115200 bps as used + on most other boards. + + Signed-off-by: Wolfgang Denk <wd@denx.de> + +commit 1836881190b3d8a6918b0d64b39fe32bbbdf85d8 +Author: Kumar Gala <galak@kernel.crashing.org> +Date: Sun Oct 19 12:49:19 2008 -0500 + + 85xx: Fix compile warning in mpc8536ds.c + + mpc8536ds.c: In function 'is_sata_supported': + mpc8536ds.c:615: warning: unused variable 'devdisr' + + Signed-off-by: Kumar Gala <galak@kernel.crashing.org> + +commit 8ed44d91c8122d00368523b0b746691c895d3b3c +Author: Wolfgang Denk <wd@denx.de> +Date: Sun Oct 19 02:35:50 2008 +0200 + + Cleanup: fix "MHz" spelling + + Signed-off-by: Wolfgang Denk <wd@denx.de> + +commit 08ef89ecd174969b3544f3f0c7cd1de3c57f737b +Author: Wolfgang Denk <wd@denx.de> +Date: Sun Oct 19 02:35:49 2008 +0200 + + Use strmhz() to format clock frequencies + + Signed-off-by: Wolfgang Denk <wd@denx.de> + +commit d50c7d4be150b2252c0d2e16cfcf69643bdd6dc9 +Author: Wolfgang Denk <wd@denx.de> +Date: Sun Oct 19 02:35:48 2008 +0200 + + strmhz(): Round numbers when printing clock frequencies + + Round clock frequencies for printing. + + Many boards printed off clock frequencies like 399 MHz instead of the + exact 400 MHz because numberes were not rounded. This is fixed now. + + Signed-off-by: Wolfgang Denk <wd@denx.de> + +commit 681c02d05b29c6d46093525052c74b9c4ddc8b08 +Author: Timur Tabi <timur@freescale.com> +Date: Mon Oct 20 15:16:47 2008 -0500 + + 85xx: properly document MPC85xx_PORDEVSR2_SEC_CFG + + Commit f7d190b1 corrected the value of MPC85xx_PORDEVSR2_SEC_CFG, but forgot + to add a comment that the correct value disagrees with the 8544 reference + manual. The changelog for that commit is also wrong, as it says "bit 28" + when it should be "bit 24". + + Signed-off-by: Timur Tabi <timur@freescale.com> + +commit 360fe71e82b83e264c964c9447c537e9a1f643c8 +Author: Heiko Schocher <hs@denx.de> +Date: Fri Oct 17 18:24:06 2008 +0200 + + mgcoge: add redundant environment sector + + Signed-off-by: Heiko Schocher <hs@denx.de> + +commit 53ebf0c470c87d5f9fa76462e5f4064d26a9b16a +Author: Heiko Schocher <hs@denx.de> +Date: Fri Oct 17 18:23:27 2008 +0200 + + mgsuvd: update size of environment + + Signed-off-by: Heiko Schocher <hs@denx.de> + +commit 2e26d837f11460c0e6dede7d65424a31e0183d09 +Author: Jason Jin <Jason.jin@freescale.com> +Date: Fri Oct 10 11:41:00 2008 +0800 + + Enabled the Freescale SGMII riser card on 8536DS + + Signed-off-by: Jason Jin <Jason.jin@freescale.com> + +commit 7e183cad0c5ab6415dca95d6ac290ea918b28c55 +Author: Liu Yu <yu.liu@freescale.com> +Date: Fri Oct 10 11:40:59 2008 +0800 + + Enabled the Freescale SGMII riser card on 8572DS + + This patch based on Andy's work. + Including command 'pixis_set_sgmii' support. + + Signed-off-by: Liu Yu <yu.liu@freescale.com> + +commit bff188baf9427c35745356439435acf3864d4c65 +Author: Liu Yu <yu.liu@freescale.com> +Date: Fri Oct 10 11:40:58 2008 +0800 + + Make pixis_set_sgmii more general to support MPC85xx boards. + + The pixis sgmii command depend on the FPGA support on the board, some 85xx + boards support SGMII riser card but did not support this command, define + CONFIG_PIXIS_SGMII_CMD for those boards which support the sgmii command. + + Not like 8544, 8572 has 4 eTsec so that the other two's pixis bits + are not supported by 8544. Therefor, define PIXIS_VSPEED2_MASK and + PIXIS_VCFGEN1_MASK in header file for both boards. + + Signed-off-by: Liu Yu <yu.liu@freescale.com> + +commit 5e981d683d2363204c76773941c2e9c2044c808f +Author: Ed Swarthout <Ed.Swarthout@freescale.com> +Date: Wed Oct 8 23:38:02 2008 -0500 + + Add cpu/8xxx to TAGS_SUBDIRS + + Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com> + +commit e1f7d22b8b52fc08c4d17a6a7db1e664281aed63 +Author: Ed Swarthout <Ed.Swarthout@freescale.com> +Date: Thu Oct 9 01:25:55 2008 -0500 + + fsl_law clear enable before changing. + + Debug sessions may have left enabled laws. + Changing lawbar with an unkown enabled tgtid could cause problems. + + Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com> + +commit 86be510f7b5443e7e937f696bfbe037fdc740b15 +Author: Ed Swarthout <Ed.Swarthout@freescale.com> +Date: Thu Oct 9 00:29:27 2008 -0500 + + mpc8572 additional end-point mode + + mpc8572 supports all pcie controllers as end-points with cfg_host_agent=0. + Include host_agent == 0 decode for end-point determination. + + This is not needed for the ds reference board since pcie3 will be a host + in order to connect to the uli chip. Include it here as a reference for + other mpc8572 boards. + + Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com> + +commit 6856b3d0221a838580e6bb06f61425fd7529ba93 +Author: Ed Swarthout <Ed.Swarthout@freescale.com> +Date: Wed Oct 8 23:37:59 2008 -0500 + + 85xx if NUM_CPUS>1, print cpu number + + Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com> + +commit f7fecc3e25050a036c9f50f0d2b85bc3199a96e0 +Author: Ed Swarthout <Ed.Swarthout@freescale.com> +Date: Wed Oct 8 23:38:01 2008 -0500 + + pixis do not print long help if not configured + + Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com> + +commit 0e17f02a8a78d85225a4d805f6a1ea95a0a460b5 +Author: Andy Fleming <afleming@freescale.com> +Date: Tue Oct 7 08:09:50 2008 -0500 + + Have u-boot pass stashing parameters into device tree + + Some cores don't support ethernet stashing at all, and some + instances have errata. Adds 3 properties to gianfar nodes + which support stashing. For now, just add this support to + 85xx SoCs. + + Signed-off-by: Andy Fleming <afleming@freescale.com> + +commit c21617fd265b7c126c6e2f2d8a23cdb00d4fade7 +Author: Haiying Wang <Haiying.Wang@freescale.com> +Date: Fri Oct 3 12:37:57 2008 -0400 + + Add DDR options setting on MPC8641HPCN board + + * Add board specific parameter table to choose correct cpo, clk_adjust, + write_data_delay based on board ddr frequency and n_ranks. + + * Set odt_rd_cfg and odt_wr_cfg based on the dimm# and CS#. + + Signed-off-by: James Yang <James.Yang@freescale.com> + Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com> + +commit 4ca06607d60d0a6378812ef58fd1eab2a7f77111 +Author: Haiying Wang <Haiying.Wang@freescale.com> +Date: Fri Oct 3 12:37:41 2008 -0400 + + Add ddr interleaving suppport for MPC8572DS board + + * Add board specific parameter table to choose correct cpo, clk_adjust, + write_data_delay, 2T based on board ddr frequency and n_ranks. + + * Set odt_rd_cfg and odt_wr_cfg based on the dimm# and CS#. + + * Set memory controller interleaving mode to bank interleaving, and disable + bank(chip select) interleaving mode by default, because the default on-board + DDR DIMMs are 2x512MB single-rank. + + * Change CONFIG_ICS307_REFCLK_HZ from 33333333 to 33333000. + + Signed-off-by: James Yang <James.Yang@freescale.com> + Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com> + +commit 1f293b417ac6ab8e317ca2b770377ca93edf2370 +Author: Haiying Wang <Haiying.Wang@freescale.com> +Date: Fri Oct 3 12:37:26 2008 -0400 + + Add debug information for DDR controller registers + + Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com> + +commit c9ffd839b1ada502c86f88edaf1534426b6688ce +Author: Haiying Wang <Haiying.Wang@freescale.com> +Date: Fri Oct 3 12:37:10 2008 -0400 + + Check DDR interleaving mode + + * Check DDR interleaving mode from environment by reading memctl_intlv_ctl and + ba_intlv_ctl. + * Print DDR interleaving mode information + * Add doc/README.fsl-ddr to describe the interleaving setting + + Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com> + +commit dfb49108e4f86c2224e1f30124328b0de66ef72e +Author: Haiying Wang <Haiying.Wang@freescale.com> +Date: Fri Oct 3 12:36:55 2008 -0400 + + Pass dimm parameters to populate populate controller options + + Because some dimm parameters like n_ranks needs to be used with the board + frequency to choose the board parameters like clk_adjust etc. in the + board_specific_paramesters table of the board ddr file, we need to pass + the dimm parameters to the board file. + + * move ddr dimm parameters header file from /cpu to /include directory. + * add ddr dimm parameters to populate board specific options. + * Fix fsl_ddr_board_options() for all the 8xxx boards which call this function. + + Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com> + +commit dbbbb3abeff325855cae76e33d69d5665631443f +Author: Haiying Wang <Haiying.Wang@freescale.com> +Date: Fri Oct 3 12:36:39 2008 -0400 + + Make DDR interleaving mode work correctly + + Fix some bugs: + 1. Correctly set intlv_ctl in cs_config. + 2. Correctly set sa, ea in cs_bnds when bank interleaving mode is enabled. + 3. Set base_address and total memory for each ddr controller in memory + controller interleaving mode. + + Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com> + +commit 1c9aa76bf9013069e24258f46f4687c9f98a02d6 +Author: Kumar Gala <galak@kernel.crashing.org> +Date: Mon Sep 22 23:40:42 2008 -0500 + + 85xx: Enable interrupt and setexpr commands on Freescale 85xx boards + + Signed-off-by: Kumar Gala <galak@kernel.crashing.org> + +commit 7c0d4a7508d252d2d7c137eeb376814132dda30f +Author: Kumar Gala <galak@kernel.crashing.org> +Date: Mon Sep 22 14:11:11 2008 -0500 + + 85xx: Improve flash remapping on MPC8572DS & MPC8536DS + + Changing the flash from cacheable to cache-inhibited was taking a significant + amount of time due to the fact that we were iterating over the full 256M of + flash. Instead we can just flush the L1 d-cache and invalidate the i-cache. + + Signed-off-by: Kumar Gala <galak@kernel.crashing.org> + +commit 54e091d3b603a3332c619199ca83a07e95960da4 +Author: Kumar Gala <galak@kernel.crashing.org> +Date: Mon Sep 22 14:11:10 2008 -0500 + + 85xx: Export invalidate_{i,d}cache and add flush_dcache + + Added the ability for C code to invalidate the i/d-cache's and + to flush the d-cache. This allows us to more efficient change mappings + from cache-able to cache-inhibited. + + Signed-off-by: Kumar Gala <galak@kernel.crashing.org> + +commit 6250f0f6297c5ba9aecdea6290799a95c5d4b1da +Author: Heiko Schocher <hs@denx.de> +Date: Fri Oct 17 16:11:52 2008 +0200 + + mgcoge, mgsuvd: extract more common code + + in ft_blob_update () for both boards was an unneccessary + repetition of code, which this patch moves in a common + function for this boards. + + Signed-off-by: Heiko Schocher <hs@denx.de> + +commit 9e299192ca9850cf725456388042a5aa5a6f3ec7 +Author: Heiko Schocher <hs@denx.de> +Date: Fri Oct 17 12:15:55 2008 +0200 + + mgcoge, mgsuvd: use in_*/out_* accesors + + Signed-off-by: Heiko Schocher <hs@denx.de> + +commit a21ca95f8b9dca22714952b348e4905ac157b5cd +Author: Heiko Schocher <hs@denx.de> +Date: Fri Oct 17 13:52:51 2008 +0200 + + mgsuvd: fix compiler warning when using soft_i2c driver + + Signed-off-by: Heiko Schocher <hs@denx.de> + +commit cac9cf7875c2a01d63422820ed4732a9bdf5ab7b +Author: Heiko Schocher <hs@denx.de> +Date: Fri Oct 17 12:15:05 2008 +0200 + + mgsuvd: fix coding style + + Signed-off-by: Heiko Schocher <hs@denx.de> + +commit 5f4c3137f4f051787707c548133823f1656eb508 +Author: Heiko Schocher <hs@denx.de> +Date: Fri Oct 17 12:13:30 2008 +0200 + + mgcoge: Second Flash on CS5 not on CS1 + + Signed-off-by: Heiko Schocher <hs@denx.de> + +commit 76da19df5b8e186d269f29190696bd31fb6c836b +Author: Kumar Gala <galak@kernel.crashing.org> +Date: Thu Oct 16 21:52:08 2008 -0500 + + Added arch_lmb_reserve to allow arch specific memory regions protection + + Each architecture has different ways of determine what regions of memory + might not be valid to get overwritten when we boot. This provides a + hook to allow them to reserve any regions they care about. Currently + only ppc, m68k and sparc need/use this. + + Signed-off-by: Kumar Gala <galak@kernel.crashing.org> + +commit e02d4a9904c8f36395994c0c81469d552b82f5ea +Author: Heiko Schocher <hs@denx.de> +Date: Thu Oct 16 16:32:35 2008 +0200 + + mgcoge: added CONFIG_FIT to support the new u-boot image format + + Signed-off-by: Heiko Schocher <hs@denx.de> + +commit 6d0f6bcf337c5261c08fabe12982178c2c489d76 +Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> +Date: Thu Oct 16 15:01:15 2008 +0200 + + rename CFG_ macros to CONFIG_SYS + + Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> + +commit 71edc271816ec82cf0550dd6980be2da3cc2ad9e +Author: Kumar Gala <galak@kernel.crashing.org> +Date: Mon Oct 13 14:12:55 2008 -0500 + + 74xx/7xx/86xx: Rename flush_data_cache to flush_dcache to match 85xx version + + Signed-off-by: Kumar Gala <galak@kernel.crashing.org> + +commit b799cb4c0eebb0762e91e9653d8b9cc9a98440e3 +Author: Kumar Gala <galak@kernel.crashing.org> +Date: Tue Sep 23 10:05:02 2008 -0500 + + Expose command table search for sub-commands + + Sub-command can benefit from using the same table and search functions + that top level commands have. Expose this functionality by refactoring + find_cmd() and introducing find_cmd_tbl() that sub-command processing + can call. + + Signed-off-by: Kumar Gala <galak@kernel.crashing.org> + +commit f7e51b27508446f8cae3927975817137979ad5e8 +Author: Heiko Schocher <hs@denx.de> +Date: Wed Oct 15 09:41:33 2008 +0200 + + mgsuvd, mgcoge: added BOOTCOUNT feature. + + Signed-off-by: Heiko Schocher <hs@denx.de> + +commit 8f64da7f83b553889bc08400c97047998382e9d2 +Author: Heiko Schocher <hs@denx.de> +Date: Wed Oct 15 09:41:00 2008 +0200 + + mgcoge, mgsuvd: added support for the IVM EEprom. + + The EEprom contains some Manufacturerinformation, + which are read from u-boot at boot time, and saved + in same hush shell variables. + + Signed-off-by: Heiko Schocher <hs@denx.de> + +commit 81473f67810c4c9b7efaed8dee258ed6bc4c7983 +Author: Heiko Schocher <hs@denx.de> +Date: Wed Oct 15 09:40:28 2008 +0200 + + hush: add showvar command for hush shell. + + This new command shows the local variables defined in + the hush shell: + + => help showvar + showvar + - print values of all hushshell variables + showvar name ... + - print value of hushshell variable 'name' + + Also make the set_local_var() and unset_local_var () + no longer static, so it is possible to define local + hush shell variables at boot time. If CONFIG_HUSH_INIT_VAR + is defined, u-boot calls hush_init_var (), where + boardspecific code can define local hush shell + variables at boottime. + + Signed-off-by: Heiko Schocher <hs@denx.de> + +commit 67b23a322848d828a5e45c0567b72762bfde7abf +Author: Heiko Schocher <hs@denx.de> +Date: Wed Oct 15 09:39:47 2008 +0200 + + I2C: adding new "i2c bus" Command to the I2C Subsystem. + + With this Command it is possible to add new I2C Busses, + which are behind 1 .. n I2C Muxes. Details see README. + + Signed-off-by: Heiko Schocher <hs@denx.de> + +commit c24853644ddd2dd2e4246b5854a93e6254a14092 +Author: Heiko Schocher <hs@denx.de> +Date: Wed Oct 15 09:39:08 2008 +0200 + + mgcoge, mgsuvd: add board specific I2C deblocking mechanism. + + As documented in doc/I2C_Edge_Conditions, adding a + board specific deblocking mechanism via CFG_I2C_INIT_BOARD + for the mgcoge and mgsuvd board. + + This code was originally written by Keymile in association + with Anatech and Atmel in 1998. The Code toggels the SCL + until the SCA line goes to HIGH (max. 16 times). + And after this, a start condition is sent. + + This is another approach to deblock the I2C Bus. The + soft I2C driver actually sends 9 clocks with SDA High, + and then a stop at the end, to deblock the I2C Bus. + + Maybe we should use the approach from Keymile as + the new standard? + + Signed-off-by: Heiko Schocher <hs@denx.de> + +commit 4ca107effebfbabac1057c39632105dacef95957 +Author: Heiko Schocher <hs@denx.de> +Date: Wed Oct 15 09:38:38 2008 +0200 + + soft_i2c: Add CFG_I2C_INIT_BOARD option + + This patch adds the option for a boardspecific + I2C deblocking mechanism for the soft i2c driver. + + Signed-off-by: Heiko Schocher <hs@denx.de> + +commit e5e4edd9f1f76210a09c34ee835f6cff60fdbbd1 +Author: Heiko Schocher <hs@denx.de> +Date: Wed Oct 15 09:38:07 2008 +0200 + + mgcoge, mgsuvd: add DTT (LM75) support. + + Signed-off-by: Heiko Schocher <hs@denx.de> + +commit 8e442df438ab677057571e3ac01846bff7719bce +Author: Heiko Schocher <hs@denx.de> +Date: Wed Oct 15 09:37:34 2008 +0200 + + lm75: Make the LM75 MULTI_BUS compatible. + + Signed-off-by: Heiko Schocher <hs@denx.de> + +commit 12f1678127c1df2b2878ba93c88948bedc060775 +Author: Heiko Schocher <hs@denx.de> +Date: Wed Oct 15 09:37:04 2008 +0200 + + lm75: fix Codingstyle issues. + + Signed-off-by: Heiko Schocher <hs@denx.de> + +commit f2202450c75ba6934b356024101500ddcde6e2a6 +Author: Heiko Schocher <hs@denx.de> +Date: Wed Oct 15 09:36:33 2008 +0200 + + mgcoge, mgsuvd: added EEprom support. + + Signed-off-by: Heiko Schocher <hs@denx.de> + +commit 9661bf9d120f760238b2a073b84f2baf05010057 +Author: Heiko Schocher <hs@denx.de> +Date: Wed Oct 15 09:36:03 2008 +0200 + + mgcoge, mgsuvd: add I2C support. + + Signed-off-by: Heiko Schocher <hs@denx.de> + +commit 98aed379586a155292efbf3209356836584b601c +Author: Heiko Schocher <hs@denx.de> +Date: Wed Oct 15 09:35:26 2008 +0200 + + soft_i2c: prevent compiler warnings if driver does not use CPU Pins. + + This patch fixes the following warnings, when using + the soft_i2c driver using no CPU pins on MPC82xx or MPC8xx + systems: + + soft_i2c.c: In function 'send_reset': + soft_i2c.c:93: warning: unused variable 'immr' + soft_i2c.c: In function 'send_start': + soft_i2c.c:124: warning: unused variable 'immr' + soft_i2c.c: In function 'send_stop': + soft_i2c.c:146: warning: unused variable 'immr' + soft_i2c.c: In function 'send_ack': + soft_i2c.c:171: warning: unused variable 'immr' + soft_i2c.c: In function 'write_byte': + soft_i2c.c:196: warning: unused variable 'immr' + soft_i2c.c: In function 'read_byte': + soft_i2c.c:244: warning: unused variable 'immr' + + Signed-off-by: Heiko Schocher <hs@denx.de> + +commit 799b784aa00cb03a352847ab9f9acdde79b72d21 +Author: Heiko Schocher <hs@denx.de> +Date: Wed Oct 15 09:34:45 2008 +0200 + + i2c: add CONFIG_I2C_MULTI_BUS for soft_i2c and mpc8260 i2c driver. + + Signed-off-by: Heiko Schocher <hs@denx.de> + +commit 0809ea2f4340ab2047400c7d3d3047f97987d0fd +Author: Heiko Schocher <hs@denx.de> +Date: Wed Oct 15 09:34:05 2008 +0200 + + mgcoge: fix Coding Style issues. + + Signed-off-by: Heiko Schocher <hs@denx.de> + +commit e43a27c49712203fe8848a17714330623edfb2eb +Author: Heiko Schocher <hs@denx.de> +Date: Wed Oct 15 09:33:30 2008 +0200 + + I2C: add new command i2c reset. + + If I2C Bus is blocked (see doc/I2C_Edge_Conditions), + it is not possible to get out of this, until the + complete Hardware gets a reset. This new commando + calls again i2c_init (and that calls i2c_init_board + if defined), which will deblock the I2C Bus. + + Signed-off-by: Heiko Schocher <hs@denx.de> + Signed-off-by: Wolfgang Denk <wd@denx.de> + +commit 86e9cdf8c415c1a9725e9dae5237ba1e7bd9f686 +Author: Heiko Schocher <hs@denx.de> +Date: Wed Oct 15 09:32:25 2008 +0200 + + mgsuvd, mgcoge: move this 2 boards in one dir. + + There are some more extensions, which are for both boards + and some more boards from this manufacturer will follow soon. + + Signed-off-by: Heiko Schocher <hs@denx.de> + Signed-off-by: Wolfgang Denk <wd@denx.de> + +commit 1c6fe6eac75d695fde677af8330c0dbe75fb6a2b +Author: Dirk Eibach <eibach@gdsys.de> +Date: Wed Oct 8 13:44:27 2008 +0200 + + hwmon: Add LM63 support + + This patch adds support for the National LM63 temperature + sensor with integrated fan control. It's used on the GDSys + Neo board (405EP) which will be submitted later. + + Signed-off-by: Dirk Eibach <eibach@gdsys.de> + Acked-by: Stefan Roese <sr@denx.de> + +commit 7ba890bf2f2b92831420243c058951aa831119fd +Author: Kyungmin Park <kmpark@infradead.org> +Date: Wed Oct 8 11:01:17 2008 +0900 + + Add Red Black Tree support + + Now it's used at UBI module. Of course other modules can use it. + If you want to use it, please define CONFIG_RBTREE + + Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> + +commit fbd85ad65dd9c98f36ed3fb12fe41f381b7d4794 +Author: richardretanubun <richardretanubun@ruggedcom.com> +Date: Mon Oct 6 16:10:53 2008 -0400 + + CONFIG_EFI_PARTITION: Added support for EFI partition in cmd_ext2fs.c + + Added support for CONFIG_EFI_PARTITION to ext2 commands. + Signed-off-by: Richard Retanubun <RichardRetanubun@RugggedCom.com> + +commit 07f3d789b9beb7ce3278c974f4d5c8f51b6ab567 +Author: richardretanubun <richardretanubun@ruggedcom.com> +Date: Fri Sep 26 11:13:22 2008 -0400 + + Add support for CONFIG_EFI_PARTITION (GUID Partition Table) + + The GUID (Globally Unique Identifier) Partition Table (GPT) is a part + of EFI. See http://en.wikipedia.org/wiki/GUID_Partition_Table + + Based on linux/fs/partitions/efi.[ch] + + Signed-off-by: Richard Retanubun <RichardRetanubun@RugggedCom.com> + +commit fbc87dc0546dff709b38f358e2c5d5e39c4ca374 +Author: Bartlomiej Sieka <tur@semihalf.com> +Date: Wed Oct 1 15:26:32 2008 +0200 + + FIT: output image load address for type 'firmware', fix message while there + + Now that the auto-update feature uses the 'firmware' type for updates, it is + useful to inspect the load address of such images. + + Signed-off-by: Bartlomiej Sieka <tur@semihalf.com> + +commit 4bae90904b69ce3deb9f7c334ef12ed74e18a275 +Author: Bartlomiej Sieka <tur@semihalf.com> +Date: Wed Oct 1 15:26:31 2008 +0200 + + Automatic software update from TFTP server + + The auto-update feature allows to automatically download software updates + from a TFTP server and store them in Flash memory during boot. Updates are + contained in a FIT file and protected with SHA-1 checksum. + + More detailed description can be found in doc/README.update. + + Signed-off-by: Rafal Czubak <rcz@semihalf.com> + Signed-off-by: Bartlomiej Sieka <tur@semihalf.com> + +commit 3f0cf51dabacc2724731c5079a60ea989103bb8f +Author: Bartlomiej Sieka <tur@semihalf.com> +Date: Wed Oct 1 15:26:27 2008 +0200 + + flash: factor out adjusting of Flash address to the end of sector + + The upcoming automatic update feature needs the ability to adjust an + address within Flash to the end of its respective sector. Factor out + this functionality to a new function flash_sect_roundb(). + + Signed-off-by: Rafal Czubak <rcz@semihalf.com> + Signed-off-by: Bartlomiej Sieka <tur@semihalf.com> + Signed-off-by: Stefan Roese <sr@denx.de> + +commit e83cc06375ac2bea0830c6ed0f9d8fdc3c1b27d5 +Author: Bartlomiej Sieka <tur@semihalf.com> +Date: Wed Oct 1 15:26:29 2008 +0200 + + net: Make TFTP server timeout configurable + + There are two aspects of a TFTP transfer involving timeouts: + 1. timeout waiting for initial server reply after sending RRQ + 2. timeouts while transferring actual data from the server + + Since the upcoming auto-update feature attempts a TFTP download during each + boot, it is undesirable to have a long delay when the TFTP server is not + available. Thus, this commit makes the server timeout (1.) configurable by two + global variables: + + TftpRRQTimeoutMSecs + TftpRRQTimeoutCountMax + + TftpRRQTimeoutMSecs overrides default timeout when trying to connect to a TFTP + server, TftpRRQTimeoutCountMax overrides default number of connection retries. + The total delay when trying to download a file from a non-existing TFTP server + is TftpRRQTimeoutMSecs x TftpRRQTimeoutCountMax milliseconds. + + Timeouts during file transfers (2.) are unaffected. + + Signed-off-by: Rafal Czubak <rcz@semihalf.com> + Signed-off-by: Bartlomiej Sieka <tur@semihalf.com> + Signed-off-by: Ben Warren <biggerbadderben@gmail.com> + +commit 49f3bdbba8071f56d950a9498b6cdb998b35340a +Author: Bartlomiej Sieka <tur@semihalf.com> +Date: Wed Oct 1 15:26:28 2008 +0200 + + net: express the first argument to NetSetTimeout() in milliseconds + + Enforce millisecond semantics of the first argument to NetSetTimeout() -- + the change is transparent for well-behaving boards (CFG_HZ == 1000 and + get_timer() countiing in milliseconds). + + Rationale for this patch is to enable millisecond granularity for + network-related timeouts, which is needed for the upcoming automatic + software update feature. + + Summary of changes: + - do not scale the first argument to NetSetTimeout() by CFG_HZ + - change timeout values used in the networking code to milliseconds + + Signed-off-by: Rafal Czubak <rcz@semihalf.com> + Signed-off-by: Bartlomiej Sieka <tur@semihalf.com> + Signed-off-by: Ben Warren <biggerbadderben@gmail.com> + +commit c68a05feeb88de9fcf158e67ff6423c4cc988f88 +Author: richardretanubun <richardretanubun@ruggedcom.com> +Date: Mon Sep 29 18:28:23 2008 -0400 + + Adds two more ethernet interface to 83xx + + Added as a convenience for other platforms that uses MPC8360 (has 8 UCC). + Six eth interface is chosen because the platform I am using combines + UCC1&2 and UCC3&4 as 1000 Eth and the other four UCCs as 10/100 Eth. + + Signed-off-by: Richard Retanubun <RichardRetanubun@RugggedCom.com> + Signed-off-by: Ben Warren <biggerbadderben@gmail.com> + +commit 41410eee472b0f42e03a77f961bbc55ef58f3c01 +Author: Haiying Wang <Haiying.Wang@freescale.com> +Date: Wed Sep 24 11:42:12 2008 -0500 + + Change UEC PHY interface to RGMII on MPC8568MDS + + Change UEC phy interface from GMII to RGMII on MPC8568MDS board + + Because on MPC8568MDS, GMII interface is only recommended for 1000Mbps speed, + but RGMII interface can work at 10/100/1000Mbps, and RGMII interface works more stable. + + Now both UEC1 and UEC2 can work properly under u-boot. + + It is also in consistent with the kernel setting for 8568 UEC phy interface. + + Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com> + Signed-off-by: Ben Warren <biggerbadderben@gmail.com> + +commit b59b16ca24bc7e77ec113021a6d77b9b32fcf192 +Author: Wolfgang Denk <wd@denx.de> +Date: Sat Oct 18 21:30:31 2008 +0200 + + Prepare v2008.10 release: update CHANGELOG & Makefile + + Signed-off-by: Wolfgang Denk <wd@denx.de> + commit f7a35a60cf45491871a5c28e9ad24db005487857 Author: Heiko Schocher <hs@denx.de> Date: Fri Oct 17 18:24:06 2008 +0200 @@ -54,6 +2278,29 @@ Date: Fri Oct 17 12:54:18 2008 +0200 Signed-off-by: Yuri Tikhonov <yur@emcraft.com> Signed-off-by: Stefan Roese <sr@denx.de> +commit ec081c2c190148b374e86a795fb6b1c49caeb549 +Author: Stefan Roese <sr@denx.de> +Date: Fri Oct 17 12:51:46 2008 +0200 + + ppc4xx: PPC44x MQ initialization + + Set the MQ Read Passing & MCIF Cycle limits to the recommended by AMCC + values. This fixes the occasional 440SPe hard locking issues when the 440SPe's + dedicated DMA engines are used (e.g. by the h/w accelerated RAID driver). + + Previously the appropriate initialization had been made in Linux, by the + ppc440spe ADMA driver, which is wrong because modifying the MQ configuration + registers after normal operation has begun is not supported and could + have unpredictable results. + + Comment from Stefan: This patch doesn't change the resulting value of the + MQ registers. It explicitly sets/clears all bits to the desired state which + better documents the resulting register value instead of relying on pre-set + default values. + + Signed-off-by: Yuri Tikhonov <yur@emcraft.com> + Signed-off-by: Stefan Roese <sr@denx.de> + commit f7d190b1c0b3ab7fc53074ad2862f7de99de37ff Author: Kumar Gala <galak@kernel.crashing.org> Date: Thu Oct 16 21:58:50 2008 -0500 @@ -212,6 +2459,53 @@ Date: Fri Oct 10 11:41:01 2008 +0800 Signed-off-by: Jason Jin <Jason.jin@freescale.com> Acked-by: Andy Fleming <afleming@freescale.com> +commit 9dbc366744960013965fce8851035b6141f3b3ae +Author: Remy Bohmer <linux@bohmer.net> +Date: Fri Oct 10 10:23:22 2008 +0200 + + The PIPE_INTERRUPT flag is used wrong + + At a lot of places in the code the PIPE_INTERRUPT flags and friends + are used wrong. The wrong bits are compared to this flag resulting + in wrong conditions. Also there are macros that should be used for + PIPE_* flags. + This patch tries to fix them all, however, I was not able to test the + changes, because I do not have any of these boards. + + Review required! + + Signed-off-by: Remy Bohmer <linux@bohmer.net> + Signed-off-by: Markus Klotzbuecher <mk@denx.de> + +commit 48867208444cb2a82e2af9c3249e90b7ed4a1751 +Author: Remy Bohmer <linux@bohmer.net> +Date: Fri Oct 10 10:23:21 2008 +0200 + + fix USB initialisation procedure + + The max packet size is encoded as 0,1,2,3 for 8,16,32,64 bytes. + At some places directly 8,16,32,64 was used instead of the encoded + value. Made a enum for the options to make this more clear and to help + preventing similar errors in the future. + + After fixing this bug it became clear that another bug existed where + the 'pipe' is and-ed with PIPE_* flags, where it should have been + 'usb_pipetype(pipe)', or even better usb_pipeint(pipe). + + Also removed the triple 'get_device_descriptor' sequence, it has no use, + and Windows nor Linux behaves that way. + There is also a poll going on with a timeout when usb_control_msg() fails. + However, the poll is useless, because the flag will never be set on a error, + because there is no code that runs in a parallel that can set this flag. + Changed this to something more logical. + + Tested on AT91SAM9261ek and compared the flow on the USB bus to what + Linux is doing. There is no difference anymore in the early initialisation + sequence. + + Signed-off-by: Remy Bohmer <linux@bohmer.net> + Signed-off-by: Markus Klotzbuecher <mk@denx.de> + commit ec4d8c1c1d94a790c1473ae8aace282b817c3123 Author: Nikita V. Youshchenko <yoush@cs.msu.su> Date: Fri Oct 3 00:03:55 2008 +0400 @@ -899,6 +3193,15 @@ Date: Mon Sep 22 11:06:50 2008 +0200 Signed-off-by: Stefan Roese <sr@denx.de> +commit e58c41e26cf3c8accd60311be579f452e368e97e +Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> +Date: Thu Sep 18 20:13:08 2008 +0900 + + usb: Fix compile warning of r8a66597-hcd + + Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> + Signed-off-by: Markus Klotzbuecher <mk@denx.de> + commit b5d10a13525c07ec6374adf840d7c87553b5f189 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> Date: Thu Sep 18 19:34:36 2008 +0900 @@ -960,6 +3263,71 @@ Date: Thu Sep 18 13:57:32 2008 +0200 Signed-off-by: Wolfgang Denk <wd@denx.de> +commit c9e8436b10cca53fca4904ecbadcd6231ad72c38 +Author: Remy Bohmer <linux@bohmer.net> +Date: Tue Sep 16 14:55:44 2008 +0200 + + USB layer of U-Boot causes USB protocol errors while using USB memory sticks + + There are several differences between Linux, Windows and U-boot for initialising the + USB devices. While analysing the behaviour of U-boot it turned out that U-boot does + things really different, and some are wrong (compared to the USB standard). + + This patch fixes some errors: + * The NEW_init procedure that was already in the code is good, while the old procedure + is wrong. See code comments for more info. + * On a Control request the data returned by the device can be more than 8 bytes, while + the host limits it to 8 bytes. This caused the host to generate a DataOverrun error. + This results in a lot of USB sticks not being recognised, and the transmission ended + frequently with a CTL:TIMEOUT Error. + * Added a flag CONFIG_LEGACY_USB_INIT_SEQ to allow users to use the old init procedure. + + Signed-off-by: Remy Bohmer <linux@bohmer.net> + Signed-off-by: Markus Klotzbuecher <mk@denx.de> + +commit 6f5794a6f78b313231256958fd73673c6aacc116 +Author: Remy Bohmer <linux@bohmer.net> +Date: Tue Sep 16 14:55:43 2008 +0200 + + Refactoring parts of the common USB OHCI code + + This patch refactors some large routines of the USB OHCI code by + making some routines smaller and more readable which helps + debugging and understanding the code. (Makes the code looks + somewhat more like the Linux implementation.) + + Also made entire file compliant to Linux Coding Rules (checkpatch.pl compliant) + + Signed-off-by: Remy Bohmer <linux@bohmer.net> + Signed-off-by: Markus Klotzbuecher <mk@denx.de> + +commit be19d324edc1a1d7f393d24e10d164cd94c91a00 +Author: Remy Bohmer <linux@bohmer.net> +Date: Tue Sep 16 14:55:42 2008 +0200 + + Fix for USB sticks not working on ARM while using GCC 4.x compilers + + The GCC-compiler makes an optimisation error while optimising the routine + usb_set_maxpacket(). This should be fixed in the compiler in the first place, + but there lots of compilers out there that makes this error, that it is + probably wiser to workaround it in U-boot itself. + + What happens is that the register r3 is used as loop-counter 'i', but gets + overwritten later on. From there it starts using register r3 for several other + things and the assembler code is becoming a big mess. This is clearly a compiler bug. + + This error occurs on at least several versions of Code Sourcery Lite compilers + for ARM. Like the Edition 2008q1, and 2008q3, It has also been seen on other + compilers, while compiling for armv4t, or armv5te with Os, O1 and O2. + + We work around it by splitting up this routine in 2 parts, and making sure that + the split out part is NOT inlined any longer. This will make GCC spit out assembler + that do not show this problem. Another possibility is to adapt the Makefile to stop + optimisation for the complete file. I think this solution is nicer. + + Signed-off-by: Remy Bohmer <linux@bohmer.net> + Signed-off-by: Markus Klotzbuecher <mk@denx.de> + commit 87b4ef560cf2da4ccc9e59711ad1ff7fafe96670 Author: Wolfgang Denk <wd@denx.de> Date: Wed Sep 17 10:17:55 2008 +0200 diff --git a/MAINTAINERS b/MAINTAINERS index a7f9b8737c..127604b0f7 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -616,6 +616,10 @@ Alex Züpke <azu@sysgo.de> lart SA1100 dnp1110 SA1110 +Sergey Lapin <slapin@ossfans.org> + + afeb9260 ARM926EJS (AT91SAM9260 SoC) + ------------------------------------------------------------------------- Unknown / orphaned boards: @@ -722,6 +726,7 @@ TsiChung Liew <Tsi-Chung.Liew@freescale.com> M52277EVB mcf5227x M5235EVB mcf52x2 M5253DEMO mcf52x2 + M53017EVB mcf532x M5329EVB mcf532x M5373EVB mcf532x M54455EVB mcf5445x @@ -534,6 +534,7 @@ LIST_ARM11=" \ ######################################################################### LIST_at91=" \ + afeb9260 \ at91cap9adk \ at91rm9200dk \ at91sam9260ek \ @@ -709,6 +710,7 @@ LIST_coldfire=" \ M5272C3 \ M5275EVB \ M5282EVB \ + M53017EVB \ M5329AFEE \ M5373EVB \ M54451EVB \ @@ -1932,7 +1932,27 @@ ZPC1900_config: unconfig ## Coldfire ######################################################################### -M52277EVB_config: unconfig +M52277EVB_config \ +M52277EVB_spansion_config \ +M52277EVB_stmicro_config : unconfig + @case "$@" in \ + M52277EVB_config) FLASH=SPANSION;; \ + M52277EVB_spansion_config) FLASH=SPANSION;; \ + M52277EVB_stmicro_config) FLASH=STMICRO;; \ + esac; \ + if [ "$${FLASH}" = "SPANSION" ] ; then \ + echo "#define CONFIG_SYS_SPANSION_BOOT" >> $(obj)include/config.h ; \ + echo "TEXT_BASE = 0x00000000" > $(obj)board/freescale/m52277evb/config.tmp ; \ + cp $(obj)board/freescale/m52277evb/u-boot.spa $(obj)board/freescale/m52277evb/u-boot.lds ; \ + $(XECHO) "... with SPANSION boot..." ; \ + fi; \ + if [ "$${FLASH}" = "STMICRO" ] ; then \ + echo "#define CONFIG_CF_SBF" >> $(obj)include/config.h ; \ + echo "#define CONFIG_SYS_STMICRO_BOOT" >> $(obj)include/config.h ; \ + echo "TEXT_BASE = 0x43E00000" > $(obj)board/freescale/m52277evb/config.tmp ; \ + cp $(obj)board/freescale/m52277evb/u-boot.stm $(obj)board/freescale/m52277evb/u-boot.lds ; \ + $(XECHO) "... with ST Micro boot..." ; \ + fi @$(MKCONFIG) -a M52277EVB m68k mcf5227x m52277evb freescale M5235EVB_config \ @@ -1992,6 +2012,9 @@ M5275EVB_config : unconfig M5282EVB_config : unconfig @$(MKCONFIG) $(@:_config=) m68k mcf52x2 m5282evb freescale +M53017EVB_config : unconfig + @$(MKCONFIG) $(@:_config=) m68k mcf532x m53017evb freescale + M5329AFEE_config \ M5329BFEE_config : unconfig @case "$@" in \ @@ -2527,15 +2550,6 @@ shannon_config : unconfig at91rm9200dk_config : unconfig @$(MKCONFIG) $(@:_config=) arm arm920t at91rm9200dk atmel at91rm9200 -at91sam9261ek_config : unconfig - @$(MKCONFIG) $(@:_config=) arm arm926ejs at91sam9261ek atmel at91 - -at91sam9263ek_config : unconfig - @$(MKCONFIG) $(@:_config=) arm arm926ejs at91sam9263ek atmel at91 - -at91sam9rlek_config : unconfig - @$(MKCONFIG) $(@:_config=) arm arm926ejs at91sam9rlek atmel at91 - cmc_pu2_config : unconfig @$(MKCONFIG) $(@:_config=) arm arm920t cmc_pu2 NULL at91rm9200 @@ -2555,12 +2569,24 @@ mp2usb_config : unconfig ## Atmel ARM926EJ-S Systems ######################################################################### +afeb9260_config: unconfig + @$(MKCONFIG) $(@:_config=) arm arm926ejs afeb9260 NULL at91 + at91cap9adk_config : unconfig @$(MKCONFIG) $(@:_config=) arm arm926ejs at91cap9adk atmel at91 at91sam9260ek_config : unconfig @$(MKCONFIG) $(@:_config=) arm arm926ejs at91sam9260ek atmel at91 +at91sam9261ek_config : unconfig + @$(MKCONFIG) $(@:_config=) arm arm926ejs at91sam9261ek atmel at91 + +at91sam9263ek_config : unconfig + @$(MKCONFIG) $(@:_config=) arm arm926ejs at91sam9263ek atmel at91 + +at91sam9rlek_config : unconfig + @$(MKCONFIG) $(@:_config=) arm arm926ejs at91sam9rlek atmel at91 + ######################################################################## ## ARM Integrator boards - see doc/README-integrator for more info. integratorap_config \ diff --git a/board/BuS/EB+MCF-EV123/Makefile b/board/BuS/EB+MCF-EV123/Makefile index ceeffa7753..ed3ac07558 100644 --- a/board/BuS/EB+MCF-EV123/Makefile +++ b/board/BuS/EB+MCF-EV123/Makefile @@ -25,7 +25,7 @@ include $(TOPDIR)/config.mk LIB = $(obj)lib$(BOARD).a -COBJS = $(BOARD).o cfm_flash.o flash.o VCxK.o mii.o +COBJS = $(BOARD).o cfm_flash.o flash.o VCxK.o SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) OBJS := $(addprefix $(obj),$(COBJS)) diff --git a/board/BuS/EB+MCF-EV123/mii.c b/board/BuS/EB+MCF-EV123/mii.c deleted file mode 100644 index 7f925142c9..0000000000 --- a/board/BuS/EB+MCF-EV123/mii.c +++ /dev/null @@ -1,304 +0,0 @@ -/* - * Copyright (C) 2004-2007 Freescale Semiconductor, Inc. - * TsiChung Liew (Tsi-Chung.Liew@freescale.com) - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include <common.h> -#include <asm/fec.h> -#include <asm/immap.h> - -#include <config.h> -#include <net.h> - -DECLARE_GLOBAL_DATA_PTR; - -#if defined(CONFIG_CMD_NET) && defined(CONFIG_NET_MULTI) -#undef MII_DEBUG -#undef ET_DEBUG - -int fecpin_setclear(struct eth_device *dev, int setclear) -{ - if (setclear) { - MCFGPIO_PASPAR |= 0x0F00; - MCFGPIO_PEHLPAR = CONFIG_SYS_PEHLPAR; - } else { - MCFGPIO_PASPAR &= 0xF0FF; - MCFGPIO_PEHLPAR &= ~CONFIG_SYS_PEHLPAR; - } - return 0; -} - -#if defined(CONFIG_SYS_DISCOVER_PHY) || defined(CONFIG_CMD_MII) -#include <miiphy.h> - -/* Make MII read/write commands for the FEC. */ -#define mk_mii_read(ADDR, REG) (0x60020000 | ((ADDR << 23) | (REG & 0x1f) << 18)) - -#define mk_mii_write(ADDR, REG, VAL) (0x50020000 | ((ADDR << 23) | (REG & 0x1f) << 18) | (VAL & 0xffff)) - -/* PHY identification */ -#define PHY_ID_LXT970 0x78100000 /* LXT970 */ -#define PHY_ID_LXT971 0x001378e0 /* LXT971 and 972 */ -#define PHY_ID_82555 0x02a80150 /* Intel 82555 */ -#define PHY_ID_QS6612 0x01814400 /* QS6612 */ -#define PHY_ID_AMD79C784 0x00225610 /* AMD 79C784 */ -#define PHY_ID_AMD79C874VC 0x0022561B /* AMD 79C874 */ -#define PHY_ID_LSI80225 0x0016f870 /* LSI 80225 */ -#define PHY_ID_LSI80225B 0x0016f880 /* LSI 80225/B */ -#define PHY_ID_DP83848VV 0x20005C90 /* National 83848 */ -#define PHY_ID_DP83849 0x20005CA2 /* National 82849 */ - -#define STR_ID_LXT970 "LXT970" -#define STR_ID_LXT971 "LXT971" -#define STR_ID_82555 "Intel82555" -#define STR_ID_QS6612 "QS6612" -#define STR_ID_AMD79C784 "AMD79C784" -#define STR_ID_AMD79C874VC "AMD79C874VC" -#define STR_ID_LSI80225 "LSI80225" -#define STR_ID_LSI80225B "LSI80225/B" -#define STR_ID_DP83848VV "N83848" -#define STR_ID_DP83849 "N83849" - -/**************************************************************************** - * mii_init -- Initialize the MII for MII command without ethernet - * This function is a subset of eth_init - **************************************************************************** - */ -void mii_reset(struct fec_info_s *info) -{ - volatile fec_t *fecp = (fec_t *) (info->miibase); - int i; - - fecp->ecr = FEC_ECR_RESET; - for (i = 0; (fecp->ecr & FEC_ECR_RESET) && (i < FEC_RESET_DELAY); ++i) { - udelay(1); - } - if (i == FEC_RESET_DELAY) { - printf("FEC_RESET_DELAY timeout\n"); - } -} - -/* send command to phy using mii, wait for result */ -uint mii_send(uint mii_cmd) -{ - struct fec_info_s *info; - struct eth_device *dev; - volatile fec_t *ep; - uint mii_reply; - int j = 0; - - /* retrieve from register structure */ - dev = eth_get_dev(); - info = dev->priv; - - ep = (fec_t *) info->miibase; - - ep->mmfr = mii_cmd; /* command to phy */ - - /* wait for mii complete */ - while (!(ep->eir & FEC_EIR_MII) && (j < MCFFEC_TOUT_LOOP)) { - udelay(1); - j++; - } - if (j >= MCFFEC_TOUT_LOOP) { - printf("MII not complete\n"); - return -1; - } - - mii_reply = ep->mmfr; /* result from phy */ - ep->eir = FEC_EIR_MII; /* clear MII complete */ -#ifdef ET_DEBUG - printf("%s[%d] %s: sent=0x%8.8x, reply=0x%8.8x\n", - __FILE__, __LINE__, __FUNCTION__, mii_cmd, mii_reply); -#endif - - return (mii_reply & 0xffff); /* data read from phy */ -} -#endif /* CONFIG_SYS_DISCOVER_PHY || CONFIG_CMD_MII */ - -#if defined(CONFIG_SYS_DISCOVER_PHY) -int mii_discover_phy(struct eth_device *dev) -{ -#define MAX_PHY_PASSES 11 - struct fec_info_s *info = dev->priv; - int phyaddr, pass; - uint phyno, phytype; - - if (info->phyname_init) - return info->phy_addr; - - phyaddr = -1; /* didn't find a PHY yet */ - for (pass = 1; pass <= MAX_PHY_PASSES && phyaddr < 0; ++pass) { - if (pass > 1) { - /* PHY may need more time to recover from reset. - * The LXT970 needs 50ms typical, no maximum is - * specified, so wait 10ms before try again. - * With 11 passes this gives it 100ms to wake up. - */ - udelay(10000); /* wait 10ms */ - } - - for (phyno = 0; phyno < 32 && phyaddr < 0; ++phyno) { - - phytype = mii_send(mk_mii_read(phyno, PHY_PHYIDR1)); -#ifdef ET_DEBUG - printf("PHY type 0x%x pass %d type\n", phytype, pass); -#endif - if (phytype != 0xffff) { - phyaddr = phyno; - phytype <<= 16; - phytype |= - mii_send(mk_mii_read(phyno, PHY_PHYIDR2)); - - switch (phytype & 0xffffffff) { - case PHY_ID_AMD79C874VC: - strcpy(info->phy_name, - STR_ID_AMD79C874VC); - info->phyname_init = 1; - break; - default: - strcpy(info->phy_name, "unknown"); - info->phyname_init = 1; - break; - } - -#ifdef ET_DEBUG - printf("PHY @ 0x%x pass %d type ", phyno, pass); - switch (phytype & 0xffffffff) { - case PHY_ID_AMD79C874VC: - printf(STR_ID_AMD79C874VC); - break; - default: - printf("0x%08x\n", phytype); - break; - } -#endif - } - } - } - if (phyaddr < 0) - printf("No PHY device found.\n"); - - return phyaddr; -} -#endif /* CONFIG_SYS_DISCOVER_PHY */ - -void mii_init(void) __attribute__((weak,alias("__mii_init"))); - -void __mii_init(void) -{ - volatile fec_t *fecp; - struct fec_info_s *info; - struct eth_device *dev; - int miispd = 0, i = 0; - u16 autoneg = 0; - - /* retrieve from register structure */ - dev = eth_get_dev(); - info = dev->priv; - - fecp = (fec_t *) info->miibase; - - fecpin_setclear(dev, 1); - - mii_reset(info); - - /* We use strictly polling mode only */ - fecp->eimr = 0; - - /* Clear any pending interrupt */ - fecp->eir = 0xffffffff; - - /* Set MII speed */ - miispd = (gd->bus_clk / 1000000) / 5; - fecp->mscr = miispd << 1; - - info->phy_addr = mii_discover_phy(dev); - -#define AUTONEGLINK (PHY_BMSR_AUTN_COMP | PHY_BMSR_LS) - while (i < MCFFEC_TOUT_LOOP) { - autoneg = 0; - miiphy_read(dev->name, info->phy_addr, PHY_BMSR, &autoneg); - i++; - - if ((autoneg & AUTONEGLINK) == AUTONEGLINK) - break; - - udelay(500); - } - if (i >= MCFFEC_TOUT_LOOP) { - printf("Auto Negotiation not complete\n"); - } - - /* adapt to the half/full speed settings */ - info->dup_spd = miiphy_duplex(dev->name, info->phy_addr) << 16; - info->dup_spd |= miiphy_speed(dev->name, info->phy_addr); -} - -/***************************************************************************** - * Read and write a MII PHY register, routines used by MII Utilities - * - * FIXME: These routines are expected to return 0 on success, but mii_send - * does _not_ return an error code. Maybe 0xFFFF means error, i.e. - * no PHY connected... - * For now always return 0. - * FIXME: These routines only work after calling eth_init() at least once! - * Otherwise they hang in mii_send() !!! Sorry! - *****************************************************************************/ - -int mcffec_miiphy_read(char *devname, unsigned char addr, unsigned char reg, - unsigned short *value) -{ - short rdreg; /* register working value */ - -#ifdef MII_DEBUG - printf("miiphy_read(0x%x) @ 0x%x = ", reg, addr); -#endif - rdreg = mii_send(mk_mii_read(addr, reg)); - - *value = rdreg; - -#ifdef MII_DEBUG - printf("0x%04x\n", *value); -#endif - - return 0; -} - -int mcffec_miiphy_write(char *devname, unsigned char addr, unsigned char reg, - unsigned short value) -{ - short rdreg; /* register working value */ - -#ifdef MII_DEBUG - printf("miiphy_write(0x%x) @ 0x%x = ", reg, addr); -#endif - - rdreg = mii_send(mk_mii_write(addr, reg, value)); - -#ifdef MII_DEBUG - printf("0x%04x\n", value); -#endif - - return 0; -} - -#endif /* CONFIG_CMD_NET, FEC_ENET & NET_MULTI */ diff --git a/board/afeb9260/Makefile b/board/afeb9260/Makefile new file mode 100644 index 0000000000..60c4304c1c --- /dev/null +++ b/board/afeb9260/Makefile @@ -0,0 +1,56 @@ +# +# (C) Copyright 2003-2008 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# +# (C) Copyright 2008 +# Stelian Pop <stelian.pop@leadtechdesign.com> +# Lead Tech Design <www.leadtechdesign.com> +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +include $(TOPDIR)/config.mk + +LIB = $(obj)lib$(BOARD).a + +COBJS-y += afeb9260.o +COBJS-y += partition.o +COBJS-$(CONFIG_CMD_NAND) += nand.o + +SRCS := $(SOBJS:.o=.S) $(COBJS-y:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS-y)) +SOBJS := $(addprefix $(obj),$(SOBJS)) + +$(LIB): $(obj).depend $(OBJS) $(SOBJS) + $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS) + +clean: + rm -f $(SOBJS) $(OBJS) + +distclean: clean + rm -f $(LIB) core *.bak .depend + +######################################################################### + +# defines $(obj).depend target +include $(SRCTREE)/rules.mk + +sinclude $(obj).depend + +######################################################################### diff --git a/board/afeb9260/afeb9260.c b/board/afeb9260/afeb9260.c new file mode 100644 index 0000000000..32445ab740 --- /dev/null +++ b/board/afeb9260/afeb9260.c @@ -0,0 +1,243 @@ +/* + * (C) Copyright 2007-2008 + * Stelian Pop <stelian.pop@leadtechdesign.com> + * Lead Tech Design <www.leadtechdesign.com> + * (C) Copyright 2008 Sergey Lapin <slapin@ossfans.org> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <asm/arch/at91sam9260.h> +#include <asm/arch/at91sam9260_matrix.h> +#include <asm/arch/at91sam9_smc.h> +#include <asm/arch/at91_pmc.h> +#include <asm/arch/at91_rstc.h> +#include <asm/arch/gpio.h> +#include <asm/arch/io.h> +#include <asm/arch/hardware.h> +#if defined(CONFIG_RESET_PHY_R) && defined(CONFIG_MACB) +#include <netdev.h> +#include <net.h> +#endif + +DECLARE_GLOBAL_DATA_PTR; + +/* ------------------------------------------------------------------------- */ +/* + * Miscelaneous platform dependent initialisations + */ + +static void afeb9260_serial_hw_init(void) +{ +#ifdef CONFIG_USART0 + at91_set_A_periph(AT91_PIN_PB4, 1); /* TXD0 */ + at91_set_A_periph(AT91_PIN_PB5, 0); /* RXD0 */ + at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9260_ID_US0); +#endif + +#ifdef CONFIG_USART1 + at91_set_A_periph(AT91_PIN_PB6, 1); /* TXD1 */ + at91_set_A_periph(AT91_PIN_PB7, 0); /* RXD1 */ + at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9260_ID_US1); +#endif + +#ifdef CONFIG_USART2 + at91_set_A_periph(AT91_PIN_PB8, 1); /* TXD2 */ + at91_set_A_periph(AT91_PIN_PB9, 0); /* RXD2 */ + at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9260_ID_US2); +#endif + +#ifdef CONFIG_USART3 /* DBGU */ + at91_set_A_periph(AT91_PIN_PB14, 0); /* DRXD */ + at91_set_A_periph(AT91_PIN_PB15, 1); /* DTXD */ + at91_sys_write(AT91_PMC_PCER, 1 << AT91_ID_SYS); +#endif +} + +static void afeb9260_nand_hw_init(void) +{ + unsigned long csa; + + /* Enable CS3 */ + csa = at91_sys_read(AT91_MATRIX_EBICSA); + at91_sys_write(AT91_MATRIX_EBICSA, + csa | AT91_MATRIX_CS3A_SMC_SMARTMEDIA); + + /* Configure SMC CS3 for NAND/SmartMedia */ + at91_sys_write(AT91_SMC_SETUP(3), + AT91_SMC_NWESETUP_(0) | AT91_SMC_NCS_WRSETUP_(0) | + AT91_SMC_NRDSETUP_(0) | AT91_SMC_NCS_RDSETUP_(0)); + at91_sys_write(AT91_SMC_PULSE(3), + AT91_SMC_NWEPULSE_(3) | AT91_SMC_NCS_WRPULSE_(3) | + AT91_SMC_NRDPULSE_(3) | AT91_SMC_NCS_RDPULSE_(3)); + at91_sys_write(AT91_SMC_CYCLE(3), + AT91_SMC_NWECYCLE_(5) | AT91_SMC_NRDCYCLE_(5)); + at91_sys_write(AT91_SMC_MODE(3), + AT91_SMC_READMODE | AT91_SMC_WRITEMODE | + AT91_SMC_EXNWMODE_DISABLE | + AT91_SMC_DBW_8 | + AT91_SMC_TDF_(2)); + + at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9260_ID_PIOC); + + /* Configure RDY/BSY */ + at91_set_gpio_input(AT91_PIN_PC13, 1); + + /* Enable NandFlash */ + at91_set_gpio_output(AT91_PIN_PC14, 1); +} + +static void afeb9260_spi_hw_init(void) +{ + at91_set_A_periph(AT91_PIN_PA3, 0); /* SPI0_NPCS0 */ + at91_set_B_periph(AT91_PIN_PC11, 0); /* SPI0_NPCS1 */ + + at91_set_A_periph(AT91_PIN_PA0, 0); /* SPI0_MISO */ + at91_set_A_periph(AT91_PIN_PA1, 0); /* SPI0_MOSI */ + at91_set_A_periph(AT91_PIN_PA2, 0); /* SPI0_SPCK */ + + /* Enable clock */ + at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9260_ID_SPI0); +} + +#ifdef CONFIG_MACB +static void afeb9260_macb_hw_init(void) +{ + /* Enable clock */ + at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9260_ID_EMAC); + + /* + * Disable pull-up on: + * RXDV (PA17) => PHY normal mode (not Test mode) + * ERX0 (PA14) => PHY ADDR0 + * ERX1 (PA15) => PHY ADDR1 + * ERX2 (PA25) => PHY ADDR2 + * ERX3 (PA26) => PHY ADDR3 + * ECRS (PA28) => PHY ADDR4 => PHYADDR = 0x0 + * + * PHY has internal pull-down + */ + writel(pin_to_mask(AT91_PIN_PA14) | + pin_to_mask(AT91_PIN_PA15) | + pin_to_mask(AT91_PIN_PA17) | + pin_to_mask(AT91_PIN_PA25) | + pin_to_mask(AT91_PIN_PA26) | + pin_to_mask(AT91_PIN_PA28), + pin_to_controller(AT91_PIN_PA0) + PIO_PUDR); + + /* Need to reset PHY -> 500ms reset */ + at91_sys_write(AT91_RSTC_MR, AT91_RSTC_KEY | + AT91_RSTC_ERSTL | (0x0D << 8) | + AT91_RSTC_URSTEN); + + at91_sys_write(AT91_RSTC_CR, AT91_RSTC_KEY | AT91_RSTC_EXTRST); + + /* Wait for end hardware reset */ + while (!(at91_sys_read(AT91_RSTC_SR) & AT91_RSTC_NRSTL)); + + /* Restore NRST value */ + at91_sys_write(AT91_RSTC_MR, AT91_RSTC_KEY | + AT91_RSTC_ERSTL | (0x0 << 8) | + AT91_RSTC_URSTEN); + + /* Re-enable pull-up */ + writel(pin_to_mask(AT91_PIN_PA14) | + pin_to_mask(AT91_PIN_PA15) | + pin_to_mask(AT91_PIN_PA17) | + pin_to_mask(AT91_PIN_PA25) | + pin_to_mask(AT91_PIN_PA26) | + pin_to_mask(AT91_PIN_PA28), + pin_to_controller(AT91_PIN_PA0) + PIO_PUER); + + at91_set_A_periph(AT91_PIN_PA19, 0); /* ETXCK_EREFCK */ + at91_set_A_periph(AT91_PIN_PA17, 0); /* ERXDV */ + at91_set_A_periph(AT91_PIN_PA14, 0); /* ERX0 */ + at91_set_A_periph(AT91_PIN_PA15, 0); /* ERX1 */ + at91_set_A_periph(AT91_PIN_PA18, 0); /* ERXER */ + at91_set_A_periph(AT91_PIN_PA16, 0); /* ETXEN */ + at91_set_A_periph(AT91_PIN_PA12, 0); /* ETX0 */ + at91_set_A_periph(AT91_PIN_PA13, 0); /* ETX1 */ + at91_set_A_periph(AT91_PIN_PA21, 0); /* EMDIO */ + at91_set_A_periph(AT91_PIN_PA20, 0); /* EMDC */ + +#ifndef CONFIG_RMII + at91_set_B_periph(AT91_PIN_PA28, 0); /* ECRS */ + at91_set_B_periph(AT91_PIN_PA29, 0); /* ECOL */ + at91_set_B_periph(AT91_PIN_PA25, 0); /* ERX2 */ + at91_set_B_periph(AT91_PIN_PA26, 0); /* ERX3 */ + at91_set_B_periph(AT91_PIN_PA27, 0); /* ERXCK */ + at91_set_B_periph(AT91_PIN_PA10, 0); /* ETX2 */ + at91_set_B_periph(AT91_PIN_PA11, 0); /* ETX3 */ + at91_set_B_periph(AT91_PIN_PA22, 0); /* ETXER */ +#endif + +} +#endif + +int board_init(void) +{ + /* Enable Ctrlc */ + console_init_f(); + + /* arch number of AT91SAM9260EK-Board */ + gd->bd->bi_arch_number = MACH_TYPE_AFEB9260; + /* adress of boot parameters */ + gd->bd->bi_boot_params = PHYS_SDRAM + 0x100; + + afeb9260_serial_hw_init(); +#ifdef CONFIG_CMD_NAND + afeb9260_nand_hw_init(); +#endif + afeb9260_spi_hw_init(); +#ifdef CONFIG_MACB + afeb9260_macb_hw_init(); +#endif + + return 0; +} + +int dram_init(void) +{ + gd->bd->bi_dram[0].start = PHYS_SDRAM; + gd->bd->bi_dram[0].size = PHYS_SDRAM_SIZE; + return 0; +} + +#ifdef CONFIG_RESET_PHY_R +void reset_phy(void) +{ +#ifdef CONFIG_MACB + /* + * Initialize ethernet HW addr prior to starting Linux, + * needed for nfsroot + */ + eth_init(gd->bd); +#endif +} +#endif + +int board_eth_init(bd_t *bis) +{ + int rc = 0; +#ifdef CONFIG_MACB + rc = macb_eth_initialize(0, (void *)AT91SAM9260_BASE_EMAC, 0x00); +#endif + return rc; +} diff --git a/board/afeb9260/config.mk b/board/afeb9260/config.mk new file mode 100644 index 0000000000..9ce161e55f --- /dev/null +++ b/board/afeb9260/config.mk @@ -0,0 +1 @@ +TEXT_BASE = 0x21f00000 diff --git a/board/afeb9260/nand.c b/board/afeb9260/nand.c new file mode 100644 index 0000000000..c5ac634aab --- /dev/null +++ b/board/afeb9260/nand.c @@ -0,0 +1,78 @@ +/* + * (C) Copyright 2007-2008 + * Stelian Pop <stelian.pop@leadtechdesign.com> + * Lead Tech Design <www.leadtechdesign.com> + * + * (C) Copyright 2006 ATMEL Rousset, Lacressonniere Nicolas + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <asm/arch/at91sam9260.h> +#include <asm/arch/gpio.h> +#include <asm/arch/at91_pio.h> + +#include <nand.h> + +/* + * hardware specific access to control-lines + */ +#define MASK_ALE (1 << 21) /* our ALE is AD21 */ +#define MASK_CLE (1 << 22) /* our CLE is AD22 */ + +static void at91sam9260ek_nand_hwcontrol(struct mtd_info *mtd, + int cmd, unsigned int ctrl) +{ + struct nand_chip *this = mtd->priv; + + if (ctrl & NAND_CTRL_CHANGE) { + ulong IO_ADDR_W = (ulong) this->IO_ADDR_W; + IO_ADDR_W &= ~(MASK_ALE | MASK_CLE); + + if (ctrl & NAND_CLE) + IO_ADDR_W |= MASK_CLE; + if (ctrl & NAND_ALE) + IO_ADDR_W |= MASK_ALE; + + at91_set_gpio_value(AT91_PIN_PC14, !(ctrl & NAND_NCE)); + this->IO_ADDR_W = (void *) IO_ADDR_W; + } + + if (cmd != NAND_CMD_NONE) + writeb(cmd, this->IO_ADDR_W); +} + +static int at91sam9260ek_nand_ready(struct mtd_info *mtd) +{ + return at91_get_gpio_value(AT91_PIN_PC13); +} + +int board_nand_init(struct nand_chip *nand) +{ + nand->ecc.mode = NAND_ECC_SOFT; +#ifdef CONFIG_SYS_NAND_DBW_16 + nand->options = NAND_BUSWIDTH_16; +#endif + nand->cmd_ctrl = at91sam9260ek_nand_hwcontrol; + nand->dev_ready = at91sam9260ek_nand_ready; + nand->chip_delay = 20; + + return 0; +} diff --git a/board/afeb9260/partition.c b/board/afeb9260/partition.c new file mode 100644 index 0000000000..0b5dc5e06f --- /dev/null +++ b/board/afeb9260/partition.c @@ -0,0 +1,37 @@ +/* + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + * + */ +#include <common.h> +#include <config.h> +#include <asm/hardware.h> +#include <dataflash.h> + +AT91S_DATAFLASH_INFO dataflash_info[CONFIG_SYS_MAX_DATAFLASH_BANKS]; + +struct dataflash_addr cs[CONFIG_SYS_MAX_DATAFLASH_BANKS] = { + {CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0, 0}, /* Logical adress, CS */ + {CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS1, 1} +}; + +/*define the area offsets*/ +dataflash_protect_t area_list[NB_DATAFLASH_AREA] = { + {0x00000000, 0x000041FF, FLAG_PROTECT_CLEAR, 0, "Bootstrap"}, + {0x00004200, 0x000083FF, FLAG_PROTECT_CLEAR, 0, "Environment"}, + {0x00008400, 0x00041FFF, FLAG_PROTECT_CLEAR, 0, "U-Boot"}, +}; + diff --git a/board/amcc/canyonlands/init.S b/board/amcc/canyonlands/init.S index 694cc89929..51b46d7107 100644 --- a/board/amcc/canyonlands/init.S +++ b/board/amcc/canyonlands/init.S @@ -98,7 +98,7 @@ tlbtab: tlbentry(CONFIG_SYS_AHB_BASE, SZ_1M, 0xbff00000, 4, AC_R|AC_W|AC_X|SA_G|SA_I) #if defined(CONFIG_RAPIDIO) - /* TLB-entries for RapidIO (SRIO) */ + /* TLB-entries for RapidIO (SRIO) */ tlbentry(CONFIG_SYS_SRGPL0_REG_BAR, SZ_16M, CONFIG_SYS_SRGPL0_REG_BAR, 0xD, AC_R|AC_W|SA_G|SA_I) tlbentry(CONFIG_SYS_SRGPL0_CFG_BAR, SZ_16M, CONFIG_SYS_SRGPL0_CFG_BAR, diff --git a/board/atmel/at91cap9adk/at91cap9adk.c b/board/atmel/at91cap9adk/at91cap9adk.c index a1a9238f6e..af145cc7c0 100644 --- a/board/atmel/at91cap9adk/at91cap9adk.c +++ b/board/atmel/at91cap9adk/at91cap9adk.c @@ -52,19 +52,19 @@ static void at91cap9_serial_hw_init(void) #ifdef CONFIG_USART0 at91_set_A_periph(AT91_PIN_PA22, 1); /* TXD0 */ at91_set_A_periph(AT91_PIN_PA23, 0); /* RXD0 */ - at91_sys_write(AT91_PMC_PCER, 1 << AT91_ID_US0); + at91_sys_write(AT91_PMC_PCER, 1 << AT91CAP9_ID_US0); #endif #ifdef CONFIG_USART1 at91_set_A_periph(AT91_PIN_PD0, 1); /* TXD1 */ at91_set_A_periph(AT91_PIN_PD1, 0); /* RXD1 */ - at91_sys_write(AT91_PMC_PCER, 1 << AT91_ID_US1); + at91_sys_write(AT91_PMC_PCER, 1 << AT91CAP9_ID_US1); #endif #ifdef CONFIG_USART2 at91_set_A_periph(AT91_PIN_PD2, 1); /* TXD2 */ at91_set_A_periph(AT91_PIN_PD3, 0); /* RXD2 */ - at91_sys_write(AT91_PMC_PCER, 1 << AT91_ID_US2); + at91_sys_write(AT91_PMC_PCER, 1 << AT91CAP9_ID_US2); #endif #ifdef CONFIG_USART3 /* DBGU */ @@ -412,7 +412,7 @@ int board_eth_init(bd_t *bis) { int rc = 0; #ifdef CONFIG_MACB - rc = macb_eth_initialize(0, (void *)AT91_BASE_EMAC, 0x00); + rc = macb_eth_initialize(0, (void *)AT91CAP9_BASE_EMAC, 0x00); #endif return rc; } diff --git a/board/atmel/at91sam9260ek/at91sam9260ek.c b/board/atmel/at91sam9260ek/at91sam9260ek.c index 372cfb22f3..ef99b8b0d5 100644 --- a/board/atmel/at91sam9260ek/at91sam9260ek.c +++ b/board/atmel/at91sam9260ek/at91sam9260ek.c @@ -48,19 +48,19 @@ static void at91sam9260ek_serial_hw_init(void) #ifdef CONFIG_USART0 at91_set_A_periph(AT91_PIN_PB4, 1); /* TXD0 */ at91_set_A_periph(AT91_PIN_PB5, 0); /* RXD0 */ - at91_sys_write(AT91_PMC_PCER, 1 << AT91_ID_US0); + at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9260_ID_US0); #endif #ifdef CONFIG_USART1 at91_set_A_periph(AT91_PIN_PB6, 1); /* TXD1 */ at91_set_A_periph(AT91_PIN_PB7, 0); /* RXD1 */ - at91_sys_write(AT91_PMC_PCER, 1 << AT91_ID_US1); + at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9260_ID_US1); #endif #ifdef CONFIG_USART2 at91_set_A_periph(AT91_PIN_PB8, 1); /* TXD2 */ at91_set_A_periph(AT91_PIN_PB9, 0); /* RXD2 */ - at91_sys_write(AT91_PMC_PCER, 1 << AT91_ID_US2); + at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9260_ID_US2); #endif #ifdef CONFIG_USART3 /* DBGU */ @@ -255,7 +255,7 @@ int board_eth_init(bd_t *bis) { int rc = 0; #ifdef CONFIG_MACB - rc = macb_eth_initialize(0, (void *)AT91_BASE_EMAC, 0x00); + rc = macb_eth_initialize(0, (void *)AT91SAM9260_BASE_EMAC, 0x00); #endif return rc; } diff --git a/board/atmel/at91sam9261ek/at91sam9261ek.c b/board/atmel/at91sam9261ek/at91sam9261ek.c index 70f1db93f6..185d6e1307 100644 --- a/board/atmel/at91sam9261ek/at91sam9261ek.c +++ b/board/atmel/at91sam9261ek/at91sam9261ek.c @@ -48,19 +48,19 @@ static void at91sam9261ek_serial_hw_init(void) #ifdef CONFIG_USART0 at91_set_A_periph(AT91_PIN_PC8, 1); /* TXD0 */ at91_set_A_periph(AT91_PIN_PC9, 0); /* RXD0 */ - at91_sys_write(AT91_PMC_PCER, 1 << AT91_ID_US0); + at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9261_ID_US0); #endif #ifdef CONFIG_USART1 at91_set_A_periph(AT91_PIN_PC12, 1); /* TXD1 */ at91_set_A_periph(AT91_PIN_PC13, 0); /* RXD1 */ - at91_sys_write(AT91_PMC_PCER, 1 << AT91_ID_US1); + at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9261_ID_US1); #endif #ifdef CONFIG_USART2 at91_set_A_periph(AT91_PIN_PC14, 1); /* TXD2 */ at91_set_A_periph(AT91_PIN_PC15, 0); /* RXD2 */ - at91_sys_write(AT91_PMC_PCER, 1 << AT91_ID_US2); + at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9261_ID_US2); #endif #ifdef CONFIG_USART3 /* DBGU */ diff --git a/board/atmel/at91sam9263ek/at91sam9263ek.c b/board/atmel/at91sam9263ek/at91sam9263ek.c index 63f95e718f..4feed9a52f 100644 --- a/board/atmel/at91sam9263ek/at91sam9263ek.c +++ b/board/atmel/at91sam9263ek/at91sam9263ek.c @@ -51,19 +51,19 @@ static void at91sam9263ek_serial_hw_init(void) #ifdef CONFIG_USART0 at91_set_A_periph(AT91_PIN_PA26, 1); /* TXD0 */ at91_set_A_periph(AT91_PIN_PA27, 0); /* RXD0 */ - at91_sys_write(AT91_PMC_PCER, 1 << AT91_ID_US0); + at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9263_ID_US0); #endif #ifdef CONFIG_USART1 at91_set_A_periph(AT91_PIN_PD0, 1); /* TXD1 */ at91_set_A_periph(AT91_PIN_PD1, 0); /* RXD1 */ - at91_sys_write(AT91_PMC_PCER, 1 << AT91_ID_US1); + at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9263_ID_US1); #endif #ifdef CONFIG_USART2 at91_set_A_periph(AT91_PIN_PD2, 1); /* TXD2 */ at91_set_A_periph(AT91_PIN_PD3, 0); /* RXD2 */ - at91_sys_write(AT91_PMC_PCER, 1 << AT91_ID_US2); + at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9263_ID_US2); #endif #ifdef CONFIG_USART3 /* DBGU */ @@ -344,7 +344,7 @@ int board_eth_init(bd_t *bis) { int rc = 0; #ifdef CONFIG_MACB - rc = macb_eth_initialize(0, (void *)AT91_BASE_EMAC, 0x00); + rc = macb_eth_initialize(0, (void *)AT91SAM9263_BASE_EMAC, 0x00); #endif return rc; } diff --git a/board/atmel/at91sam9rlek/at91sam9rlek.c b/board/atmel/at91sam9rlek/at91sam9rlek.c index 37e371ff2d..992dd4cd2c 100644 --- a/board/atmel/at91sam9rlek/at91sam9rlek.c +++ b/board/atmel/at91sam9rlek/at91sam9rlek.c @@ -48,19 +48,19 @@ static void at91sam9rlek_serial_hw_init(void) #ifdef CONFIG_USART0 at91_set_A_periph(AT91_PIN_PA6, 1); /* TXD0 */ at91_set_A_periph(AT91_PIN_PA7, 0); /* RXD0 */ - at91_sys_write(AT91_PMC_PCER, 1 << AT91_ID_US0); + at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9RL_ID_US0); #endif #ifdef CONFIG_USART1 at91_set_A_periph(AT91_PIN_PA11, 1); /* TXD1 */ at91_set_A_periph(AT91_PIN_PA12, 0); /* RXD1 */ - at91_sys_write(AT91_PMC_PCER, 1 << AT91_ID_US1); + at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9RL_ID_US1); #endif #ifdef CONFIG_USART2 at91_set_A_periph(AT91_PIN_PA13, 1); /* TXD2 */ at91_set_A_periph(AT91_PIN_PA14, 0); /* RXD2 */ - at91_sys_write(AT91_PMC_PCER, 1 << AT91_ID_US2); + at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9RL_ID_US2); #endif #ifdef CONFIG_USART3 /* DBGU */ diff --git a/board/atum8548/atum8548.c b/board/atum8548/atum8548.c index 7b7a968a71..226ef57eee 100644 --- a/board/atum8548/atum8548.c +++ b/board/atum8548/atum8548.c @@ -377,7 +377,7 @@ int last_stage_init(void) #if defined(CONFIG_OF_BOARD_SETUP) extern void ft_fsl_pci_setup(void *blob, const char *pci_alias, - struct pci_controller *hose); + struct pci_controller *hose); void ft_board_setup(void *blob, bd_t *bd) { diff --git a/board/cobra5272/Makefile b/board/cobra5272/Makefile index be704b76f0..cf07cf40fd 100644 --- a/board/cobra5272/Makefile +++ b/board/cobra5272/Makefile @@ -25,7 +25,7 @@ include $(TOPDIR)/config.mk LIB = $(obj)lib$(BOARD).a -COBJS = $(BOARD).o flash.o mii.o +COBJS = $(BOARD).o flash.o SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) OBJS := $(addprefix $(obj),$(COBJS)) diff --git a/board/cobra5272/mii.c b/board/cobra5272/mii.c deleted file mode 100644 index 161c694b82..0000000000 --- a/board/cobra5272/mii.c +++ /dev/null @@ -1,303 +0,0 @@ -/* - * Copyright (C) 2004-2007 Freescale Semiconductor, Inc. - * TsiChung Liew (Tsi-Chung.Liew@freescale.com) - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include <common.h> -#include <asm/fec.h> -#include <asm/immap.h> - -#include <config.h> -#include <net.h> - -DECLARE_GLOBAL_DATA_PTR; - -#if defined(CONFIG_CMD_NET) && defined(CONFIG_NET_MULTI) -#undef MII_DEBUG -#undef ET_DEBUG - -int fecpin_setclear(struct eth_device *dev, int setclear) -{ - volatile gpio_t *gpio = (gpio_t *) MMAP_GPIO; - - if (setclear) { - gpio->gpio_pbcnt |= GPIO_PBCNT_E_MDC | GPIO_PBCNT_E_RXER | GPIO_PBCNT_E_RXD1 | GPIO_PBCNT_E_RXD2 | GPIO_PBCNT_E_RXD3 | GPIO_PBCNT_E_TXD1 | GPIO_PBCNT_E_TXD2 | GPIO_PBCNT_E_TXD3; - } else { - } - return 0; -} - -#if defined(CONFIG_SYS_DISCOVER_PHY) || defined(CONFIG_CMD_MII) -#include <miiphy.h> - -/* Make MII read/write commands for the FEC. */ -#define mk_mii_read(ADDR, REG) (0x60020000 | ((ADDR << 23) | (REG & 0x1f) << 18)) - -#define mk_mii_write(ADDR, REG, VAL) (0x50020000 | ((ADDR << 23) | (REG & 0x1f) << 18) | (VAL & 0xffff)) - -/* PHY identification */ -#define PHY_ID_LXT970 0x78100000 /* LXT970 */ -#define PHY_ID_LXT971 0x001378e0 /* LXT971 and 972 */ -#define PHY_ID_82555 0x02a80150 /* Intel 82555 */ -#define PHY_ID_QS6612 0x01814400 /* QS6612 */ -#define PHY_ID_AMD79C784 0x00225610 /* AMD 79C784 */ -#define PHY_ID_AMD79C874VC 0x0022561B /* AMD 79C874 */ -#define PHY_ID_LSI80225 0x0016f870 /* LSI 80225 */ -#define PHY_ID_LSI80225B 0x0016f880 /* LSI 80225/B */ -#define PHY_ID_DP83848VV 0x20005C90 /* National 83848 */ -#define PHY_ID_DP83849 0x20005CA2 /* National 82849 */ - -#define STR_ID_LXT970 "LXT970" -#define STR_ID_LXT971 "LXT971" -#define STR_ID_82555 "Intel82555" -#define STR_ID_QS6612 "QS6612" -#define STR_ID_AMD79C784 "AMD79C784" -#define STR_ID_AMD79C874VC "AMD79C874VC" -#define STR_ID_LSI80225 "LSI80225" -#define STR_ID_LSI80225B "LSI80225/B" -#define STR_ID_DP83848VV "N83848" -#define STR_ID_DP83849 "N83849" - -/**************************************************************************** - * mii_init -- Initialize the MII for MII command without ethernet - * This function is a subset of eth_init - **************************************************************************** - */ -void mii_reset(struct fec_info_s *info) -{ - volatile fec_t *fecp = (fec_t *) (info->miibase); - int i; - - fecp->ecr = FEC_ECR_RESET; - for (i = 0; (fecp->ecr & FEC_ECR_RESET) && (i < FEC_RESET_DELAY); ++i) { - udelay(1); - } - if (i == FEC_RESET_DELAY) { - printf("FEC_RESET_DELAY timeout\n"); - } -} - -/* send command to phy using mii, wait for result */ -uint mii_send(uint mii_cmd) -{ - struct fec_info_s *info; - struct eth_device *dev; - volatile fec_t *ep; - uint mii_reply; - int j = 0; - - /* retrieve from register structure */ - dev = eth_get_dev(); - info = dev->priv; - - ep = (fec_t *) info->miibase; - - ep->mmfr = mii_cmd; /* command to phy */ - - /* wait for mii complete */ - while (!(ep->eir & FEC_EIR_MII) && (j < MCFFEC_TOUT_LOOP)) { - udelay(1); - j++; - } - if (j >= MCFFEC_TOUT_LOOP) { - printf("MII not complete\n"); - return -1; - } - - mii_reply = ep->mmfr; /* result from phy */ - ep->eir = FEC_EIR_MII; /* clear MII complete */ -#ifdef ET_DEBUG - printf("%s[%d] %s: sent=0x%8.8x, reply=0x%8.8x\n", - __FILE__, __LINE__, __FUNCTION__, mii_cmd, mii_reply); -#endif - - return (mii_reply & 0xffff); /* data read from phy */ -} -#endif /* CONFIG_SYS_DISCOVER_PHY || CONFIG_CMD_MII */ - -#if defined(CONFIG_SYS_DISCOVER_PHY) -int mii_discover_phy(struct eth_device *dev) -{ -#define MAX_PHY_PASSES 11 - struct fec_info_s *info = dev->priv; - int phyaddr, pass; - uint phyno, phytype; - - if (info->phyname_init) - return info->phy_addr; - - phyaddr = -1; /* didn't find a PHY yet */ - for (pass = 1; pass <= MAX_PHY_PASSES && phyaddr < 0; ++pass) { - if (pass > 1) { - /* PHY may need more time to recover from reset. - * The LXT970 needs 50ms typical, no maximum is - * specified, so wait 10ms before try again. - * With 11 passes this gives it 100ms to wake up. - */ - udelay(10000); /* wait 10ms */ - } - - for (phyno = 0; phyno < 32 && phyaddr < 0; ++phyno) { - - phytype = mii_send(mk_mii_read(phyno, PHY_PHYIDR1)); -#ifdef ET_DEBUG - printf("PHY type 0x%x pass %d type\n", phytype, pass); -#endif - if (phytype != 0xffff) { - phyaddr = phyno; - phytype <<= 16; - phytype |= - mii_send(mk_mii_read(phyno, PHY_PHYIDR2)); - - switch (phytype & 0xffffffff) { - case PHY_ID_AMD79C874VC: - strcpy(info->phy_name, - STR_ID_AMD79C874VC); - info->phyname_init = 1; - break; - default: - strcpy(info->phy_name, "unknown"); - info->phyname_init = 1; - break; - } - -#ifdef ET_DEBUG - printf("PHY @ 0x%x pass %d type ", phyno, pass); - switch (phytype & 0xffffffff) { - case PHY_ID_AMD79C874VC: - printf(STR_ID_AMD79C874VC); - break; - default: - printf("0x%08x\n", phytype); - break; - } -#endif - } - } - } - if (phyaddr < 0) - printf("No PHY device found.\n"); - - return phyaddr; -} -#endif /* CONFIG_SYS_DISCOVER_PHY */ - -void mii_init(void) __attribute__((weak,alias("__mii_init"))); - -void __mii_init(void) -{ - volatile fec_t *fecp; - struct fec_info_s *info; - struct eth_device *dev; - int miispd = 0, i = 0; - u16 autoneg = 0; - - /* retrieve from register structure */ - dev = eth_get_dev(); - info = dev->priv; - - fecp = (fec_t *) info->miibase; - - fecpin_setclear(dev, 1); - - mii_reset(info); - - /* We use strictly polling mode only */ - fecp->eimr = 0; - - /* Clear any pending interrupt */ - fecp->eir = 0xffffffff; - - /* Set MII speed */ - miispd = (gd->bus_clk / 1000000) / 5; - fecp->mscr = miispd << 1; - - info->phy_addr = mii_discover_phy(dev); - -#define AUTONEGLINK (PHY_BMSR_AUTN_COMP | PHY_BMSR_LS) - while (i < MCFFEC_TOUT_LOOP) { - autoneg = 0; - miiphy_read(dev->name, info->phy_addr, PHY_BMSR, &autoneg); - i++; - - if ((autoneg & AUTONEGLINK) == AUTONEGLINK) - break; - - udelay(500); - } - if (i >= MCFFEC_TOUT_LOOP) { - printf("Auto Negotiation not complete\n"); - } - - /* adapt to the half/full speed settings */ - info->dup_spd = miiphy_duplex(dev->name, info->phy_addr) << 16; - info->dup_spd |= miiphy_speed(dev->name, info->phy_addr); -} - -/***************************************************************************** - * Read and write a MII PHY register, routines used by MII Utilities - * - * FIXME: These routines are expected to return 0 on success, but mii_send - * does _not_ return an error code. Maybe 0xFFFF means error, i.e. - * no PHY connected... - * For now always return 0. - * FIXME: These routines only work after calling eth_init() at least once! - * Otherwise they hang in mii_send() !!! Sorry! - *****************************************************************************/ - -int mcffec_miiphy_read(char *devname, unsigned char addr, unsigned char reg, - unsigned short *value) -{ - short rdreg; /* register working value */ - -#ifdef MII_DEBUG - printf("miiphy_read(0x%x) @ 0x%x = ", reg, addr); -#endif - rdreg = mii_send(mk_mii_read(addr, reg)); - - *value = rdreg; - -#ifdef MII_DEBUG - printf("0x%04x\n", *value); -#endif - - return 0; -} - -int mcffec_miiphy_write(char *devname, unsigned char addr, unsigned char reg, - unsigned short value) -{ - short rdreg; /* register working value */ - -#ifdef MII_DEBUG - printf("miiphy_write(0x%x) @ 0x%x = ", reg, addr); -#endif - - rdreg = mii_send(mk_mii_write(addr, reg, value)); - -#ifdef MII_DEBUG - printf("0x%04x\n", value); -#endif - - return 0; -} - -#endif /* CONFIG_CMD_NET, FEC_ENET & NET_MULTI */ diff --git a/board/delta/nand.c b/board/delta/nand.c index 14382f5a85..aff7c54fc2 100644 --- a/board/delta/nand.c +++ b/board/delta/nand.c @@ -46,8 +46,6 @@ # define DFC_DEBUG3(fmt, args...) #endif -#define MIN(x, y) ((x < y) ? x : y) - /* These really don't belong here, as they are specific to the NAND Model */ static uint8_t scan_ff_pattern[] = { 0xff, 0xff }; diff --git a/board/freescale/m52277evb/config.mk b/board/freescale/m52277evb/config.mk index ce014edca8..b42fcc94ce 100644 --- a/board/freescale/m52277evb/config.mk +++ b/board/freescale/m52277evb/config.mk @@ -22,4 +22,6 @@ # MA 02111-1307 USA # -TEXT_BASE = 0 +sinclude $(OBJTREE)/board/$(BOARDDIR)/config.tmp + +PLATFORM_CPPFLAGS += -DTEXT_BASE=$(TEXT_BASE) diff --git a/board/freescale/m52277evb/m52277evb.c b/board/freescale/m52277evb/m52277evb.c index 838a6de0f9..9109edb371 100644 --- a/board/freescale/m52277evb/m52277evb.c +++ b/board/freescale/m52277evb/m52277evb.c @@ -38,8 +38,18 @@ int checkboard(void) phys_size_t initdram(int board_type) { + u32 dramsize; + +#ifdef CONFIG_CF_SBF + /* + * Serial Boot: The dram is already initialized in start.S + * only require to return DRAM size + */ + dramsize = CONFIG_SYS_SDRAM_SIZE * 0x100000; +#else volatile sdramc_t *sdram = (volatile sdramc_t *)(MMAP_SDRAM); - u32 dramsize, i; + volatile gpio_t *gpio = (volatile gpio_t *)(MMAP_GPIO); + u32 i; dramsize = CONFIG_SYS_SDRAM_SIZE * 0x100000; @@ -49,6 +59,8 @@ phys_size_t initdram(int board_type) } i--; + gpio->mscr_sdram = CONFIG_SYS_SDRAM_DRV_STRENGTH; + sdram->sdcs0 = (CONFIG_SYS_SDRAM_BASE | i); sdram->sdcfg1 = CONFIG_SYS_SDRAM_CFG1; @@ -56,24 +68,30 @@ phys_size_t initdram(int board_type) /* Issue PALL */ sdram->sdcr = CONFIG_SYS_SDRAM_CTRL | 2; + __asm__("nop"); /* Issue LEMR */ - /*sdram->sdmr = CONFIG_SYS_SDRAM_EMOD; */ sdram->sdmr = CONFIG_SYS_SDRAM_MODE; + __asm__("nop"); + sdram->sdmr = CONFIG_SYS_SDRAM_EMOD; + __asm__("nop"); udelay(1000); /* Issue PALL */ sdram->sdcr = CONFIG_SYS_SDRAM_CTRL | 2; + __asm__("nop"); /* Perform two refresh cycles */ sdram->sdcr = CONFIG_SYS_SDRAM_CTRL | 4; + __asm__("nop"); sdram->sdcr = CONFIG_SYS_SDRAM_CTRL | 4; + __asm__("nop"); - sdram->sdcr = (CONFIG_SYS_SDRAM_CTRL & ~0x80000000) | 0x10000c00; + sdram->sdcr = (CONFIG_SYS_SDRAM_CTRL & ~0x80000000) | 0x10000C00; udelay(100); - +#endif return (dramsize); }; diff --git a/board/freescale/m52277evb/u-boot.lds b/board/freescale/m52277evb/u-boot.spa index 7ae70d455f..7ae70d455f 100644 --- a/board/freescale/m52277evb/u-boot.lds +++ b/board/freescale/m52277evb/u-boot.spa diff --git a/board/freescale/m5235evb/u-boot.lds b/board/freescale/m52277evb/u-boot.stm index c0611b9ce3..03ff532964 100644 --- a/board/freescale/m5235evb/u-boot.lds +++ b/board/freescale/m52277evb/u-boot.stm @@ -33,11 +33,11 @@ SECTIONS .dynsym : { *(.dynsym) } .dynstr : { *(.dynstr) } .rel.text : { *(.rel.text) } - .rela.text : { *(.rela.text) } + .rela.text : { *(.rela.text) } .rel.data : { *(.rel.data) } - .rela.data : { *(.rela.data) } - .rel.rodata : { *(.rel.rodata) } - .rela.rodata : { *(.rela.rodata) } + .rela.data : { *(.rela.data) } + .rel.rodata : { *(.rel.rodata) } + .rela.rodata : { *(.rela.rodata) } .rel.got : { *(.rel.got) } .rela.got : { *(.rela.got) } .rel.ctors : { *(.rel.ctors) } @@ -55,15 +55,7 @@ SECTIONS /* WARNING - the following is hand-optimized to fit within */ /* the sector layout of our flash chips! XXX FIXME XXX */ - cpu/mcf523x/start.o (.text) - cpu/mcf523x/cpu_init.o (.text) - lib_m68k/traps.o (.text) - lib_m68k/interrupts.o (.text) - common/dlmalloc.o (.text) - lib_generic/zlib.o (.text) - - . = DEFINED(env_offset) ? env_offset : .; - common/env_embedded.o (.text) + cpu/mcf5227x/start.o (.text) *(.text) *(.fixup) @@ -129,7 +121,7 @@ SECTIONS __init_end = .; __bss_start = .; - .bss (NOLOAD) : + .bss : { _sbss = .; *(.sbss) *(.scommon) diff --git a/board/freescale/m5235evb/Makefile b/board/freescale/m5235evb/Makefile index 74c2528698..981763d205 100644 --- a/board/freescale/m5235evb/Makefile +++ b/board/freescale/m5235evb/Makefile @@ -25,7 +25,7 @@ include $(TOPDIR)/config.mk LIB = $(obj)lib$(BOARD).a -COBJS = $(BOARD).o mii.o +COBJS = $(BOARD).o SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) OBJS := $(addprefix $(obj),$(COBJS)) diff --git a/board/freescale/m5235evb/mii.c b/board/freescale/m5235evb/mii.c deleted file mode 100644 index 5fbbd667a1..0000000000 --- a/board/freescale/m5235evb/mii.c +++ /dev/null @@ -1,307 +0,0 @@ -/* - * Copyright (C) 2004-2007 Freescale Semiconductor, Inc. - * TsiChung Liew (Tsi-Chung.Liew@freescale.com) - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include <common.h> -#include <asm/fec.h> -#include <asm/immap.h> - -#include <config.h> -#include <net.h> - -DECLARE_GLOBAL_DATA_PTR; - -#if defined(CONFIG_CMD_NET) && defined(CONFIG_NET_MULTI) -#undef MII_DEBUG -#undef ET_DEBUG - -int fecpin_setclear(struct eth_device *dev, int setclear) -{ - volatile gpio_t *gpio = (gpio_t *) MMAP_GPIO; - - if (setclear) { - gpio->par_feci2c |= - (GPIO_PAR_FECI2C_EMDC_FECEMDC | GPIO_PAR_FECI2C_EMDIO_FECEMDIO); - } else { - gpio->par_feci2c &= - ~(GPIO_PAR_FECI2C_EMDC_MASK | GPIO_PAR_FECI2C_EMDIO_MASK); - } - - return 0; -} - -#if defined(CONFIG_SYS_DISCOVER_PHY) || defined(CONFIG_MII) -#include <miiphy.h> - -/* Make MII read/write commands for the FEC. */ -#define mk_mii_read(ADDR, REG) (0x60020000 | ((ADDR << 23) | (REG & 0x1f) << 18)) - -#define mk_mii_write(ADDR, REG, VAL) (0x50020000 | ((ADDR << 23) | (REG & 0x1f) << 18) | (VAL & 0xffff)) - -/* PHY identification */ -#define PHY_ID_LXT970 0x78100000 /* LXT970 */ -#define PHY_ID_LXT971 0x001378e0 /* LXT971 and 972 */ -#define PHY_ID_82555 0x02a80150 /* Intel 82555 */ -#define PHY_ID_QS6612 0x01814400 /* QS6612 */ -#define PHY_ID_AMD79C784 0x00225610 /* AMD 79C784 */ -#define PHY_ID_LSI80225 0x0016f870 /* LSI 80225 */ -#define PHY_ID_LSI80225B 0x0016f880 /* LSI 80225/B */ -#define PHY_ID_DP83848VV 0x20005C90 /* National 83848 */ -#define PHY_ID_DP83849 0x20005CA2 /* National 82849 */ -#define PHY_ID_KS8721BL 0x00221619 /* Micrel KS8721BL/SL */ - -#define STR_ID_LXT970 "LXT970" -#define STR_ID_LXT971 "LXT971" -#define STR_ID_82555 "Intel82555" -#define STR_ID_QS6612 "QS6612" -#define STR_ID_AMD79C784 "AMD79C784" -#define STR_ID_LSI80225 "LSI80225" -#define STR_ID_LSI80225B "LSI80225/B" -#define STR_ID_DP83848VV "N83848" -#define STR_ID_DP83849 "N83849" -#define STR_ID_KS8721BL "KS8721BL" - -/**************************************************************************** - * mii_init -- Initialize the MII for MII command without ethernet - * This function is a subset of eth_init - **************************************************************************** - */ -void mii_reset(struct fec_info_s *info) -{ - volatile fec_t *fecp = (fec_t *) (info->miibase); - int i; - - fecp->ecr = FEC_ECR_RESET; - for (i = 0; (fecp->ecr & FEC_ECR_RESET) && (i < FEC_RESET_DELAY); ++i) { - udelay(1); - } - if (i == FEC_RESET_DELAY) { - printf("FEC_RESET_DELAY timeout\n"); - } -} - -/* send command to phy using mii, wait for result */ -uint mii_send(uint mii_cmd) -{ - struct fec_info_s *info; - struct eth_device *dev; - volatile fec_t *ep; - uint mii_reply; - int j = 0; - - /* retrieve from register structure */ - dev = eth_get_dev(); - info = dev->priv; - - ep = (fec_t *) info->miibase; - - ep->mmfr = mii_cmd; /* command to phy */ - - /* wait for mii complete */ - while (!(ep->eir & FEC_EIR_MII) && (j < MCFFEC_TOUT_LOOP)) { - udelay(1); - j++; - } - if (j >= MCFFEC_TOUT_LOOP) { - printf("MII not complete\n"); - return -1; - } - - mii_reply = ep->mmfr; /* result from phy */ - ep->eir = FEC_EIR_MII; /* clear MII complete */ -#ifdef ET_DEBUG - printf("%s[%d] %s: sent=0x%8.8x, reply=0x%8.8x\n", - __FILE__, __LINE__, __FUNCTION__, mii_cmd, mii_reply); -#endif - - return (mii_reply & 0xffff); /* data read from phy */ -} -#endif /* CONFIG_SYS_DISCOVER_PHY || (CONFIG_MII) */ - -#if defined(CONFIG_SYS_DISCOVER_PHY) -int mii_discover_phy(struct eth_device *dev) -{ -#define MAX_PHY_PASSES 11 - struct fec_info_s *info = dev->priv; - int phyaddr, pass; - uint phyno, phytype; - - if (info->phyname_init) - return info->phy_addr; - - phyaddr = -1; /* didn't find a PHY yet */ - for (pass = 1; pass <= MAX_PHY_PASSES && phyaddr < 0; ++pass) { - if (pass > 1) { - /* PHY may need more time to recover from reset. - * The LXT970 needs 50ms typical, no maximum is - * specified, so wait 10ms before try again. - * With 11 passes this gives it 100ms to wake up. - */ - udelay(10000); /* wait 10ms */ - } - - for (phyno = 0; phyno < 32 && phyaddr < 0; ++phyno) { - - phytype = mii_send(mk_mii_read(phyno, PHY_PHYIDR1)); -#ifdef ET_DEBUG - printf("PHY type 0x%x pass %d type\n", phytype, pass); -#endif - if (phytype != 0xffff) { - phyaddr = phyno; - phytype <<= 16; - phytype |= - mii_send(mk_mii_read(phyno, PHY_PHYIDR2)); - - switch (phytype & 0xffffffff) { - case PHY_ID_KS8721BL: - strcpy(info->phy_name, - STR_ID_KS8721BL); - info->phyname_init = 1; - break; - default: - strcpy(info->phy_name, "unknown"); - info->phyname_init = 1; - break; - } - -#ifdef ET_DEBUG - printf("PHY @ 0x%x pass %d type ", phyno, pass); - switch (phytype & 0xffffffff) { - case PHY_ID_KS8721BL: - printf(STR_ID_KS8721BL); - break; - default: - printf("0x%08x\n", phytype); - break; - } -#endif - } - } - } - if (phyaddr < 0) - printf("No PHY device found.\n"); - - return phyaddr; -} -#endif /* CONFIG_SYS_DISCOVER_PHY */ - -void mii_init(void) __attribute__((weak,alias("__mii_init"))); - -void __mii_init(void) -{ - volatile fec_t *fecp; - struct fec_info_s *info; - struct eth_device *dev; - int miispd = 0, i = 0; - u16 autoneg = 0; - - /* retrieve from register structure */ - dev = eth_get_dev(); - info = dev->priv; - - fecp = (fec_t *) info->miibase; - - fecpin_setclear(dev, 1); - - mii_reset(info); - - /* We use strictly polling mode only */ - fecp->eimr = 0; - - /* Clear any pending interrupt */ - fecp->eir = 0xffffffff; - - /* Set MII speed */ - miispd = (gd->bus_clk / 1000000) / 5; - fecp->mscr = miispd << 1; - - info->phy_addr = mii_discover_phy(dev); - -#define AUTONEGLINK (PHY_BMSR_AUTN_COMP | PHY_BMSR_LS) - while (i < MCFFEC_TOUT_LOOP) { - autoneg = 0; - miiphy_read(dev->name, info->phy_addr, PHY_BMSR, &autoneg); - i++; - - if ((autoneg & AUTONEGLINK) == AUTONEGLINK) - break; - - udelay(500); - } - if (i >= MCFFEC_TOUT_LOOP) { - printf("Auto Negotiation not complete\n"); - } - - /* adapt to the half/full speed settings */ - info->dup_spd = miiphy_duplex(dev->name, info->phy_addr) << 16; - info->dup_spd |= miiphy_speed(dev->name, info->phy_addr); -} - -/***************************************************************************** - * Read and write a MII PHY register, routines used by MII Utilities - * - * FIXME: These routines are expected to return 0 on success, but mii_send - * does _not_ return an error code. Maybe 0xFFFF means error, i.e. - * no PHY connected... - * For now always return 0. - * FIXME: These routines only work after calling eth_init() at least once! - * Otherwise they hang in mii_send() !!! Sorry! - *****************************************************************************/ - -int mcffec_miiphy_read(char *devname, unsigned char addr, unsigned char reg, - unsigned short *value) -{ - short rdreg; /* register working value */ - -#ifdef MII_DEBUG - printf("miiphy_read(0x%x) @ 0x%x = ", reg, addr); -#endif - rdreg = mii_send(mk_mii_read(addr, reg)); - - *value = rdreg; - -#ifdef MII_DEBUG - printf("0x%04x\n", *value); -#endif - - return 0; -} - -int mcffec_miiphy_write(char *devname, unsigned char addr, unsigned char reg, - unsigned short value) -{ - short rdreg; /* register working value */ - -#ifdef MII_DEBUG - printf("miiphy_write(0x%x) @ 0x%x = ", reg, addr); -#endif - - rdreg = mii_send(mk_mii_write(addr, reg, value)); - -#ifdef MII_DEBUG - printf("0x%04x\n", value); -#endif - - return 0; -} - -#endif /* CONFIG_CMD_NET, FEC_ENET & NET_MULTI */ diff --git a/board/freescale/m5271evb/Makefile b/board/freescale/m5271evb/Makefile index 2ec71ee1d2..424ab1cf9e 100644 --- a/board/freescale/m5271evb/Makefile +++ b/board/freescale/m5271evb/Makefile @@ -25,7 +25,7 @@ include $(TOPDIR)/config.mk LIB = $(obj)lib$(BOARD).a -COBJS = $(BOARD).o mii.o +COBJS = $(BOARD).o SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) OBJS := $(addprefix $(obj),$(COBJS)) diff --git a/board/freescale/m5271evb/mii.c b/board/freescale/m5271evb/mii.c deleted file mode 100644 index e79fa19584..0000000000 --- a/board/freescale/m5271evb/mii.c +++ /dev/null @@ -1,303 +0,0 @@ -/* - * Copyright (C) 2004-2007 Freescale Semiconductor, Inc. - * TsiChung Liew (Tsi-Chung.Liew@freescale.com) - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include <common.h> -#include <asm/fec.h> -#include <asm/immap.h> - -#include <config.h> -#include <net.h> - -DECLARE_GLOBAL_DATA_PTR; - -#if defined(CONFIG_CMD_NET) && defined(CONFIG_NET_MULTI) -#undef MII_DEBUG -#undef ET_DEBUG - -int fecpin_setclear(struct eth_device *dev, int setclear) -{ - if (setclear) { - /* Enable Ethernet pins */ - mbar_writeByte(MCF_GPIO_PAR_FECI2C, CONFIG_SYS_FECI2C); - } else { - } - - return 0; -} - -#if defined(CONFIG_SYS_DISCOVER_PHY) || defined(CONFIG_CMD_MII) -#include <miiphy.h> - -/* Make MII read/write commands for the FEC. */ -#define mk_mii_read(ADDR, REG) (0x60020000 | ((ADDR << 23) | (REG & 0x1f) << 18)) - -#define mk_mii_write(ADDR, REG, VAL) (0x50020000 | ((ADDR << 23) | (REG & 0x1f) << 18) | (VAL & 0xffff)) - -/* PHY identification */ -#define PHY_ID_LXT970 0x78100000 /* LXT970 */ -#define PHY_ID_LXT971 0x001378e0 /* LXT971 and 972 */ -#define PHY_ID_82555 0x02a80150 /* Intel 82555 */ -#define PHY_ID_QS6612 0x01814400 /* QS6612 */ -#define PHY_ID_AMD79C784 0x00225610 /* AMD 79C784 */ -#define PHY_ID_LSI80225 0x0016f870 /* LSI 80225 */ -#define PHY_ID_LSI80225B 0x0016f880 /* LSI 80225/B */ -#define PHY_ID_DP83848VV 0x20005C90 /* National 83848 */ -#define PHY_ID_DP83849 0x20005CA2 /* National 82849 */ -#define PHY_ID_KS8721BL 0x00221619 /* Micrel KS8721BL/SL */ - -#define STR_ID_LXT970 "LXT970" -#define STR_ID_LXT971 "LXT971" -#define STR_ID_82555 "Intel82555" -#define STR_ID_QS6612 "QS6612" -#define STR_ID_AMD79C784 "AMD79C784" -#define STR_ID_LSI80225 "LSI80225" -#define STR_ID_LSI80225B "LSI80225/B" -#define STR_ID_DP83848VV "N83848" -#define STR_ID_DP83849 "N83849" -#define STR_ID_KS8721BL "KS8721BL" - -/**************************************************************************** - * mii_init -- Initialize the MII for MII command without ethernet - * This function is a subset of eth_init - **************************************************************************** - */ -void mii_reset(struct fec_info_s *info) -{ - volatile fec_t *fecp = (fec_t *) (info->miibase); - int i; - - fecp->ecr = FEC_ECR_RESET; - for (i = 0; (fecp->ecr & FEC_ECR_RESET) && (i < FEC_RESET_DELAY); ++i) { - udelay(1); - } - if (i == FEC_RESET_DELAY) { - printf("FEC_RESET_DELAY timeout\n"); - } -} - -/* send command to phy using mii, wait for result */ -uint mii_send(uint mii_cmd) -{ - struct fec_info_s *info; - struct eth_device *dev; - volatile fec_t *ep; - uint mii_reply; - int j = 0; - - /* retrieve from register structure */ - dev = eth_get_dev(); - info = dev->priv; - - ep = (fec_t *) info->miibase; - - ep->mmfr = mii_cmd; /* command to phy */ - - /* wait for mii complete */ - while (!(ep->eir & FEC_EIR_MII) && (j < MCFFEC_TOUT_LOOP)) { - udelay(1); - j++; - } - if (j >= MCFFEC_TOUT_LOOP) { - printf("MII not complete\n"); - return -1; - } - - mii_reply = ep->mmfr; /* result from phy */ - ep->eir = FEC_EIR_MII; /* clear MII complete */ -#ifdef ET_DEBUG - printf("%s[%d] %s: sent=0x%8.8x, reply=0x%8.8x\n", - __FILE__, __LINE__, __FUNCTION__, mii_cmd, mii_reply); -#endif - - return (mii_reply & 0xffff); /* data read from phy */ -} -#endif /* CONFIG_SYS_DISCOVER_PHY || CONFIG_CMD_MII */ - -#if defined(CONFIG_SYS_DISCOVER_PHY) -int mii_discover_phy(struct eth_device *dev) -{ -#define MAX_PHY_PASSES 11 - struct fec_info_s *info = dev->priv; - int phyaddr, pass; - uint phyno, phytype; - - if (info->phyname_init) - return info->phy_addr; - - phyaddr = -1; /* didn't find a PHY yet */ - for (pass = 1; pass <= MAX_PHY_PASSES && phyaddr < 0; ++pass) { - if (pass > 1) { - /* PHY may need more time to recover from reset. - * The LXT970 needs 50ms typical, no maximum is - * specified, so wait 10ms before try again. - * With 11 passes this gives it 100ms to wake up. - */ - udelay(10000); /* wait 10ms */ - } - - for (phyno = 0; phyno < 32 && phyaddr < 0; ++phyno) { - - phytype = mii_send(mk_mii_read(phyno, PHY_PHYIDR1)); -#ifdef ET_DEBUG - printf("PHY type 0x%x pass %d type\n", phytype, pass); -#endif - if (phytype != 0xffff) { - phyaddr = phyno; - phytype <<= 16; - phytype |= - mii_send(mk_mii_read(phyno, PHY_PHYIDR2)); - - switch (phytype & 0xffffffff) { - case PHY_ID_KS8721BL: - strcpy(info->phy_name, - STR_ID_KS8721BL); - info->phyname_init = 1; - break; - default: - strcpy(info->phy_name, "unknown"); - info->phyname_init = 1; - break; - } - -#ifdef ET_DEBUG - printf("PHY @ 0x%x pass %d type ", phyno, pass); - switch (phytype & 0xffffffff) { - case PHY_ID_KS8721BL: - printf(STR_ID_KS8721BL); - break; - default: - printf("0x%08x\n", phytype); - break; - } -#endif - } - } - } - if (phyaddr < 0) - printf("No PHY device found.\n"); - - return phyaddr; -} -#endif /* CONFIG_SYS_DISCOVER_PHY */ - -void mii_init(void) __attribute__((weak,alias("__mii_init"))); - -void __mii_init(void) -{ - volatile fec_t *fecp; - struct fec_info_s *info; - struct eth_device *dev; - int miispd = 0, i = 0; - u16 autoneg = 0; - - /* retrieve from register structure */ - dev = eth_get_dev(); - info = dev->priv; - - fecp = (fec_t *) info->miibase; - - fecpin_setclear(dev, 1); - - mii_reset(info); - - /* We use strictly polling mode only */ - fecp->eimr = 0; - - /* Clear any pending interrupt */ - fecp->eir = 0xffffffff; - - /* Set MII speed */ - miispd = (gd->bus_clk / 1000000) / 5; - fecp->mscr = miispd << 1; - - info->phy_addr = mii_discover_phy(dev); - -#define AUTONEGLINK (PHY_BMSR_AUTN_COMP | PHY_BMSR_LS) - while (i < MCFFEC_TOUT_LOOP) { - autoneg = 0; - miiphy_read(dev->name, info->phy_addr, PHY_BMSR, &autoneg); - i++; - - if ((autoneg & AUTONEGLINK) == AUTONEGLINK) - break; - - udelay(500); - } - if (i >= MCFFEC_TOUT_LOOP) { - printf("Auto Negotiation not complete\n"); - } - - /* adapt to the half/full speed settings */ - info->dup_spd = miiphy_duplex(dev->name, info->phy_addr) << 16; - info->dup_spd |= miiphy_speed(dev->name, info->phy_addr); -} - -/***************************************************************************** - * Read and write a MII PHY register, routines used by MII Utilities - * - * FIXME: These routines are expected to return 0 on success, but mii_send - * does _not_ return an error code. Maybe 0xFFFF means error, i.e. - * no PHY connected... - * For now always return 0. - * FIXME: These routines only work after calling eth_init() at least once! - * Otherwise they hang in mii_send() !!! Sorry! - *****************************************************************************/ - -int mcffec_miiphy_read(char *devname, unsigned char addr, unsigned char reg, - unsigned short *value) -{ - short rdreg; /* register working value */ - -#ifdef MII_DEBUG - printf("miiphy_read(0x%x) @ 0x%x = ", reg, addr); -#endif - rdreg = mii_send(mk_mii_read(addr, reg)); - - *value = rdreg; - -#ifdef MII_DEBUG - printf("0x%04x\n", *value); -#endif - - return 0; -} - -int mcffec_miiphy_write(char *devname, unsigned char addr, unsigned char reg, - unsigned short value) -{ - short rdreg; /* register working value */ - -#ifdef MII_DEBUG - printf("miiphy_write(0x%x) @ 0x%x = ", reg, addr); -#endif - - rdreg = mii_send(mk_mii_write(addr, reg, value)); - -#ifdef MII_DEBUG - printf("0x%04x\n", value); -#endif - - return 0; -} - -#endif /* CONFIG_CMD_NET, FEC_ENET & NET_MULTI */ diff --git a/board/freescale/m5272c3/Makefile b/board/freescale/m5272c3/Makefile index be704b76f0..424ab1cf9e 100644 --- a/board/freescale/m5272c3/Makefile +++ b/board/freescale/m5272c3/Makefile @@ -25,7 +25,7 @@ include $(TOPDIR)/config.mk LIB = $(obj)lib$(BOARD).a -COBJS = $(BOARD).o flash.o mii.o +COBJS = $(BOARD).o SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) OBJS := $(addprefix $(obj),$(COBJS)) diff --git a/board/freescale/m5272c3/flash.c b/board/freescale/m5272c3/flash.c deleted file mode 100644 index 586a2cfc63..0000000000 --- a/board/freescale/m5272c3/flash.c +++ /dev/null @@ -1,378 +0,0 @@ -/* - * (C) Copyright 2000-2003 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include <common.h> - -#define PHYS_FLASH_1 CONFIG_SYS_FLASH_BASE -#define FLASH_BANK_SIZE 0x200000 - -flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS]; - -void flash_print_info (flash_info_t * info) -{ - int i; - - switch (info->flash_id & FLASH_VENDMASK) { - case (AMD_MANUFACT & FLASH_VENDMASK): - printf ("AMD: "); - break; - default: - printf ("Unknown Vendor "); - break; - } - - switch (info->flash_id & FLASH_TYPEMASK) { - case (AMD_ID_PL160CB & FLASH_TYPEMASK): - printf ("AM29PL160CB (16Mbit)\n"); - break; - default: - printf ("Unknown Chip Type\n"); - goto Done; - break; - } - - printf (" Size: %ld MB in %d Sectors\n", - info->size >> 20, info->sector_count); - - printf (" Sector Start Addresses:"); - for (i = 0; i < info->sector_count; i++) { - if ((i % 5) == 0) { - printf ("\n "); - } - printf (" %08lX%s", info->start[i], - info->protect[i] ? " (RO)" : " "); - } - printf ("\n"); - - Done: - return; -} - - -unsigned long flash_init (void) -{ - int i, j; - ulong size = 0; - - for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; i++) { - ulong flashbase = 0; - - flash_info[i].flash_id = - (AMD_MANUFACT & FLASH_VENDMASK) | - (AMD_ID_PL160CB & FLASH_TYPEMASK); - flash_info[i].size = FLASH_BANK_SIZE; - flash_info[i].sector_count = CONFIG_SYS_MAX_FLASH_SECT; - memset (flash_info[i].protect, 0, CONFIG_SYS_MAX_FLASH_SECT); - if (i == 0) - flashbase = PHYS_FLASH_1; - else - panic ("configured to many flash banks!\n"); - - for (j = 0; j < flash_info[i].sector_count; j++) { - if (j == 0) { - /* 1st is 16 KiB */ - flash_info[i].start[j] = flashbase; - } - if ((j >= 1) && (j <= 2)) { - /* 2nd and 3rd are 8 KiB */ - flash_info[i].start[j] = - flashbase + 0x4000 + 0x2000 * (j - 1); - } - if (j == 3) { - /* 4th is 224 KiB */ - flash_info[i].start[j] = flashbase + 0x8000; - } - if ((j >= 4) && (j <= 10)) { - /* rest is 256 KiB */ - flash_info[i].start[j] = - flashbase + 0x40000 + 0x40000 * (j - - 4); - } - } - size += flash_info[i].size; - } - - flash_protect (FLAG_PROTECT_SET, - CONFIG_SYS_FLASH_BASE, - CONFIG_SYS_FLASH_BASE + 0x3ffff, &flash_info[0]); - - return size; -} - - -#define CMD_READ_ARRAY 0x00F0 -#define CMD_UNLOCK1 0x00AA -#define CMD_UNLOCK2 0x0055 -#define CMD_ERASE_SETUP 0x0080 -#define CMD_ERASE_CONFIRM 0x0030 -#define CMD_PROGRAM 0x00A0 -#define CMD_UNLOCK_BYPASS 0x0020 - -#define MEM_FLASH_ADDR1 (*(volatile u16 *)(CONFIG_SYS_FLASH_BASE + (0x00000555<<1))) -#define MEM_FLASH_ADDR2 (*(volatile u16 *)(CONFIG_SYS_FLASH_BASE + (0x000002AA<<1))) - -#define BIT_ERASE_DONE 0x0080 -#define BIT_RDY_MASK 0x0080 -#define BIT_PROGRAM_ERROR 0x0020 -#define BIT_TIMEOUT 0x80000000 /* our flag */ - -#define READY 1 -#define ERR 2 -#define TMO 4 - - -int flash_erase (flash_info_t * info, int s_first, int s_last) -{ - ulong result; - int iflag, cflag, prot, sect; - int rc = ERR_OK; - int chip1; - - /* first look for protection bits */ - - if (info->flash_id == FLASH_UNKNOWN) - return ERR_UNKNOWN_FLASH_TYPE; - - if ((s_first < 0) || (s_first > s_last)) { - return ERR_INVAL; - } - - if ((info->flash_id & FLASH_VENDMASK) != - (AMD_MANUFACT & FLASH_VENDMASK)) { - return ERR_UNKNOWN_FLASH_VENDOR; - } - - prot = 0; - for (sect = s_first; sect <= s_last; ++sect) { - if (info->protect[sect]) { - prot++; - } - } - if (prot) - return ERR_PROTECTED; - - /* - * Disable interrupts which might cause a timeout - * here. Remember that our exception vectors are - * at address 0 in the flash, and we don't want a - * (ticker) exception to happen while the flash - * chip is in programming mode. - */ - - cflag = icache_status (); - icache_disable (); - iflag = disable_interrupts (); - - printf ("\n"); - - /* Start erase on unprotected sectors */ - for (sect = s_first; sect <= s_last && !ctrlc (); sect++) { - printf ("Erasing sector %2d ... ", sect); - - /* arm simple, non interrupt dependent timer */ - set_timer (0); - - if (info->protect[sect] == 0) { /* not protected */ - volatile u16 *addr = - (volatile u16 *) (info->start[sect]); - - MEM_FLASH_ADDR1 = CMD_UNLOCK1; - MEM_FLASH_ADDR2 = CMD_UNLOCK2; - MEM_FLASH_ADDR1 = CMD_ERASE_SETUP; - - MEM_FLASH_ADDR1 = CMD_UNLOCK1; - MEM_FLASH_ADDR2 = CMD_UNLOCK2; - *addr = CMD_ERASE_CONFIRM; - - /* wait until flash is ready */ - chip1 = 0; - - do { - result = *addr; - - /* check timeout */ - if (get_timer (0) > CONFIG_SYS_FLASH_ERASE_TOUT) { - MEM_FLASH_ADDR1 = CMD_READ_ARRAY; - chip1 = TMO; - break; - } - - if (!chip1 - && (result & 0xFFFF) & BIT_ERASE_DONE) - chip1 = READY; - - } while (!chip1); - - MEM_FLASH_ADDR1 = CMD_READ_ARRAY; - - if (chip1 == ERR) { - rc = ERR_PROG_ERROR; - goto outahere; - } - if (chip1 == TMO) { - rc = ERR_TIMOUT; - goto outahere; - } - - printf ("ok.\n"); - } else { /* it was protected */ - - printf ("protected!\n"); - } - } - - if (ctrlc ()) - printf ("User Interrupt!\n"); - - outahere: - /* allow flash to settle - wait 10 ms */ - udelay (10000); - - if (iflag) - enable_interrupts (); - - if (cflag) - icache_enable (); - - return rc; -} - -static int write_word (flash_info_t * info, ulong dest, ulong data) -{ - volatile u16 *addr = (volatile u16 *) dest; - ulong result; - int rc = ERR_OK; - int cflag, iflag; - int chip1; - - /* - * Check if Flash is (sufficiently) erased - */ - result = *addr; - if ((result & data) != data) - return ERR_NOT_ERASED; - - - /* - * Disable interrupts which might cause a timeout - * here. Remember that our exception vectors are - * at address 0 in the flash, and we don't want a - * (ticker) exception to happen while the flash - * chip is in programming mode. - */ - - cflag = icache_status (); - icache_disable (); - iflag = disable_interrupts (); - - MEM_FLASH_ADDR1 = CMD_UNLOCK1; - MEM_FLASH_ADDR2 = CMD_UNLOCK2; - MEM_FLASH_ADDR1 = CMD_PROGRAM; - *addr = data; - - /* arm simple, non interrupt dependent timer */ - set_timer (0); - - /* wait until flash is ready */ - chip1 = 0; - do { - result = *addr; - - /* check timeout */ - if (get_timer (0) > CONFIG_SYS_FLASH_ERASE_TOUT) { - chip1 = ERR | TMO; - break; - } - if (!chip1 && ((result & 0x80) == (data & 0x80))) - chip1 = READY; - - } while (!chip1); - - *addr = CMD_READ_ARRAY; - - if (chip1 == ERR || *addr != data) - rc = ERR_PROG_ERROR; - - if (iflag) - enable_interrupts (); - - if (cflag) - icache_enable (); - - return rc; -} - - -int write_buff (flash_info_t * info, uchar * src, ulong addr, ulong cnt) -{ - ulong wp, data; - int rc; - - if (addr & 1) { - printf ("unaligned destination not supported\n"); - return ERR_ALIGN; - } - -#if 0 - if (cnt & 1) { - printf ("odd transfer sizes not supported\n"); - return ERR_ALIGN; - } -#endif - - wp = addr; - - if (addr & 1) { - data = (*((volatile u8 *) addr) << 8) | *((volatile u8 *) - src); - if ((rc = write_word (info, wp - 1, data)) != 0) { - return (rc); - } - src += 1; - wp += 1; - cnt -= 1; - } - - while (cnt >= 2) { - data = *((volatile u16 *) src); - if ((rc = write_word (info, wp, data)) != 0) { - return (rc); - } - src += 2; - wp += 2; - cnt -= 2; - } - - if (cnt == 1) { - data = (*((volatile u8 *) src) << 8) | - *((volatile u8 *) (wp + 1)); - if ((rc = write_word (info, wp, data)) != 0) { - return (rc); - } - src += 1; - wp += 1; - cnt -= 1; - } - - return ERR_OK; -} diff --git a/board/freescale/m5272c3/mii.c b/board/freescale/m5272c3/mii.c deleted file mode 100644 index 161c694b82..0000000000 --- a/board/freescale/m5272c3/mii.c +++ /dev/null @@ -1,303 +0,0 @@ -/* - * Copyright (C) 2004-2007 Freescale Semiconductor, Inc. - * TsiChung Liew (Tsi-Chung.Liew@freescale.com) - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include <common.h> -#include <asm/fec.h> -#include <asm/immap.h> - -#include <config.h> -#include <net.h> - -DECLARE_GLOBAL_DATA_PTR; - -#if defined(CONFIG_CMD_NET) && defined(CONFIG_NET_MULTI) -#undef MII_DEBUG -#undef ET_DEBUG - -int fecpin_setclear(struct eth_device *dev, int setclear) -{ - volatile gpio_t *gpio = (gpio_t *) MMAP_GPIO; - - if (setclear) { - gpio->gpio_pbcnt |= GPIO_PBCNT_E_MDC | GPIO_PBCNT_E_RXER | GPIO_PBCNT_E_RXD1 | GPIO_PBCNT_E_RXD2 | GPIO_PBCNT_E_RXD3 | GPIO_PBCNT_E_TXD1 | GPIO_PBCNT_E_TXD2 | GPIO_PBCNT_E_TXD3; - } else { - } - return 0; -} - -#if defined(CONFIG_SYS_DISCOVER_PHY) || defined(CONFIG_CMD_MII) -#include <miiphy.h> - -/* Make MII read/write commands for the FEC. */ -#define mk_mii_read(ADDR, REG) (0x60020000 | ((ADDR << 23) | (REG & 0x1f) << 18)) - -#define mk_mii_write(ADDR, REG, VAL) (0x50020000 | ((ADDR << 23) | (REG & 0x1f) << 18) | (VAL & 0xffff)) - -/* PHY identification */ -#define PHY_ID_LXT970 0x78100000 /* LXT970 */ -#define PHY_ID_LXT971 0x001378e0 /* LXT971 and 972 */ -#define PHY_ID_82555 0x02a80150 /* Intel 82555 */ -#define PHY_ID_QS6612 0x01814400 /* QS6612 */ -#define PHY_ID_AMD79C784 0x00225610 /* AMD 79C784 */ -#define PHY_ID_AMD79C874VC 0x0022561B /* AMD 79C874 */ -#define PHY_ID_LSI80225 0x0016f870 /* LSI 80225 */ -#define PHY_ID_LSI80225B 0x0016f880 /* LSI 80225/B */ -#define PHY_ID_DP83848VV 0x20005C90 /* National 83848 */ -#define PHY_ID_DP83849 0x20005CA2 /* National 82849 */ - -#define STR_ID_LXT970 "LXT970" -#define STR_ID_LXT971 "LXT971" -#define STR_ID_82555 "Intel82555" -#define STR_ID_QS6612 "QS6612" -#define STR_ID_AMD79C784 "AMD79C784" -#define STR_ID_AMD79C874VC "AMD79C874VC" -#define STR_ID_LSI80225 "LSI80225" -#define STR_ID_LSI80225B "LSI80225/B" -#define STR_ID_DP83848VV "N83848" -#define STR_ID_DP83849 "N83849" - -/**************************************************************************** - * mii_init -- Initialize the MII for MII command without ethernet - * This function is a subset of eth_init - **************************************************************************** - */ -void mii_reset(struct fec_info_s *info) -{ - volatile fec_t *fecp = (fec_t *) (info->miibase); - int i; - - fecp->ecr = FEC_ECR_RESET; - for (i = 0; (fecp->ecr & FEC_ECR_RESET) && (i < FEC_RESET_DELAY); ++i) { - udelay(1); - } - if (i == FEC_RESET_DELAY) { - printf("FEC_RESET_DELAY timeout\n"); - } -} - -/* send command to phy using mii, wait for result */ -uint mii_send(uint mii_cmd) -{ - struct fec_info_s *info; - struct eth_device *dev; - volatile fec_t *ep; - uint mii_reply; - int j = 0; - - /* retrieve from register structure */ - dev = eth_get_dev(); - info = dev->priv; - - ep = (fec_t *) info->miibase; - - ep->mmfr = mii_cmd; /* command to phy */ - - /* wait for mii complete */ - while (!(ep->eir & FEC_EIR_MII) && (j < MCFFEC_TOUT_LOOP)) { - udelay(1); - j++; - } - if (j >= MCFFEC_TOUT_LOOP) { - printf("MII not complete\n"); - return -1; - } - - mii_reply = ep->mmfr; /* result from phy */ - ep->eir = FEC_EIR_MII; /* clear MII complete */ -#ifdef ET_DEBUG - printf("%s[%d] %s: sent=0x%8.8x, reply=0x%8.8x\n", - __FILE__, __LINE__, __FUNCTION__, mii_cmd, mii_reply); -#endif - - return (mii_reply & 0xffff); /* data read from phy */ -} -#endif /* CONFIG_SYS_DISCOVER_PHY || CONFIG_CMD_MII */ - -#if defined(CONFIG_SYS_DISCOVER_PHY) -int mii_discover_phy(struct eth_device *dev) -{ -#define MAX_PHY_PASSES 11 - struct fec_info_s *info = dev->priv; - int phyaddr, pass; - uint phyno, phytype; - - if (info->phyname_init) - return info->phy_addr; - - phyaddr = -1; /* didn't find a PHY yet */ - for (pass = 1; pass <= MAX_PHY_PASSES && phyaddr < 0; ++pass) { - if (pass > 1) { - /* PHY may need more time to recover from reset. - * The LXT970 needs 50ms typical, no maximum is - * specified, so wait 10ms before try again. - * With 11 passes this gives it 100ms to wake up. - */ - udelay(10000); /* wait 10ms */ - } - - for (phyno = 0; phyno < 32 && phyaddr < 0; ++phyno) { - - phytype = mii_send(mk_mii_read(phyno, PHY_PHYIDR1)); -#ifdef ET_DEBUG - printf("PHY type 0x%x pass %d type\n", phytype, pass); -#endif - if (phytype != 0xffff) { - phyaddr = phyno; - phytype <<= 16; - phytype |= - mii_send(mk_mii_read(phyno, PHY_PHYIDR2)); - - switch (phytype & 0xffffffff) { - case PHY_ID_AMD79C874VC: - strcpy(info->phy_name, - STR_ID_AMD79C874VC); - info->phyname_init = 1; - break; - default: - strcpy(info->phy_name, "unknown"); - info->phyname_init = 1; - break; - } - -#ifdef ET_DEBUG - printf("PHY @ 0x%x pass %d type ", phyno, pass); - switch (phytype & 0xffffffff) { - case PHY_ID_AMD79C874VC: - printf(STR_ID_AMD79C874VC); - break; - default: - printf("0x%08x\n", phytype); - break; - } -#endif - } - } - } - if (phyaddr < 0) - printf("No PHY device found.\n"); - - return phyaddr; -} -#endif /* CONFIG_SYS_DISCOVER_PHY */ - -void mii_init(void) __attribute__((weak,alias("__mii_init"))); - -void __mii_init(void) -{ - volatile fec_t *fecp; - struct fec_info_s *info; - struct eth_device *dev; - int miispd = 0, i = 0; - u16 autoneg = 0; - - /* retrieve from register structure */ - dev = eth_get_dev(); - info = dev->priv; - - fecp = (fec_t *) info->miibase; - - fecpin_setclear(dev, 1); - - mii_reset(info); - - /* We use strictly polling mode only */ - fecp->eimr = 0; - - /* Clear any pending interrupt */ - fecp->eir = 0xffffffff; - - /* Set MII speed */ - miispd = (gd->bus_clk / 1000000) / 5; - fecp->mscr = miispd << 1; - - info->phy_addr = mii_discover_phy(dev); - -#define AUTONEGLINK (PHY_BMSR_AUTN_COMP | PHY_BMSR_LS) - while (i < MCFFEC_TOUT_LOOP) { - autoneg = 0; - miiphy_read(dev->name, info->phy_addr, PHY_BMSR, &autoneg); - i++; - - if ((autoneg & AUTONEGLINK) == AUTONEGLINK) - break; - - udelay(500); - } - if (i >= MCFFEC_TOUT_LOOP) { - printf("Auto Negotiation not complete\n"); - } - - /* adapt to the half/full speed settings */ - info->dup_spd = miiphy_duplex(dev->name, info->phy_addr) << 16; - info->dup_spd |= miiphy_speed(dev->name, info->phy_addr); -} - -/***************************************************************************** - * Read and write a MII PHY register, routines used by MII Utilities - * - * FIXME: These routines are expected to return 0 on success, but mii_send - * does _not_ return an error code. Maybe 0xFFFF means error, i.e. - * no PHY connected... - * For now always return 0. - * FIXME: These routines only work after calling eth_init() at least once! - * Otherwise they hang in mii_send() !!! Sorry! - *****************************************************************************/ - -int mcffec_miiphy_read(char *devname, unsigned char addr, unsigned char reg, - unsigned short *value) -{ - short rdreg; /* register working value */ - -#ifdef MII_DEBUG - printf("miiphy_read(0x%x) @ 0x%x = ", reg, addr); -#endif - rdreg = mii_send(mk_mii_read(addr, reg)); - - *value = rdreg; - -#ifdef MII_DEBUG - printf("0x%04x\n", *value); -#endif - - return 0; -} - -int mcffec_miiphy_write(char *devname, unsigned char addr, unsigned char reg, - unsigned short value) -{ - short rdreg; /* register working value */ - -#ifdef MII_DEBUG - printf("miiphy_write(0x%x) @ 0x%x = ", reg, addr); -#endif - - rdreg = mii_send(mk_mii_write(addr, reg, value)); - -#ifdef MII_DEBUG - printf("0x%04x\n", value); -#endif - - return 0; -} - -#endif /* CONFIG_CMD_NET, FEC_ENET & NET_MULTI */ diff --git a/board/freescale/m5275evb/Makefile b/board/freescale/m5275evb/Makefile index 74c2528698..981763d205 100644 --- a/board/freescale/m5275evb/Makefile +++ b/board/freescale/m5275evb/Makefile @@ -25,7 +25,7 @@ include $(TOPDIR)/config.mk LIB = $(obj)lib$(BOARD).a -COBJS = $(BOARD).o mii.o +COBJS = $(BOARD).o SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) OBJS := $(addprefix $(obj),$(COBJS)) diff --git a/board/freescale/m5275evb/mii.c b/board/freescale/m5275evb/mii.c deleted file mode 100644 index 706d8d6b24..0000000000 --- a/board/freescale/m5275evb/mii.c +++ /dev/null @@ -1,319 +0,0 @@ -/* - * Copyright (C) 2004-2007 Freescale Semiconductor, Inc. - * TsiChung Liew (Tsi-Chung.Liew@freescale.com) - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include <common.h> -#include <asm/fec.h> -#include <asm/immap.h> - -#include <config.h> -#include <net.h> - -DECLARE_GLOBAL_DATA_PTR; - -#if defined(CONFIG_CMD_NET) && defined(CONFIG_NET_MULTI) -#undef MII_DEBUG -#undef ET_DEBUG - -int fecpin_setclear(struct eth_device *dev, int setclear) -{ - struct fec_info_s *info = (struct fec_info_s *) dev->priv; - volatile gpio_t *gpio = (gpio_t *)MMAP_GPIO; - - if (setclear) { - /* Enable Ethernet pins */ - if (info->iobase == CONFIG_SYS_FEC0_IOBASE) { - gpio->par_feci2c |= 0x0F00; - gpio->par_fec0hl |= 0xC0; - } else { - gpio->par_feci2c |= 0x00A0; - gpio->par_fec1hl |= 0xC0; - } - } else { - if (info->iobase == CONFIG_SYS_FEC0_IOBASE) { - gpio->par_feci2c &= ~0x0F00; - gpio->par_fec0hl &= ~0xC0; - } else { - gpio->par_feci2c &= ~0x00A0; - gpio->par_fec1hl &= ~0xC0; - } - } - - return 0; -} - -#if defined(CONFIG_SYS_DISCOVER_PHY) || defined(CONFIG_CMD_MII) -#include <miiphy.h> - -/* Make MII read/write commands for the FEC. */ -#define mk_mii_read(ADDR, REG) (0x60020000 | ((ADDR << 23) | (REG & 0x1f) << 18)) - -#define mk_mii_write(ADDR, REG, VAL) (0x50020000 | ((ADDR << 23) | (REG & 0x1f) << 18) | (VAL & 0xffff)) - -/* PHY identification */ -#define PHY_ID_LXT970 0x78100000 /* LXT970 */ -#define PHY_ID_LXT971 0x001378e0 /* LXT971 and 972 */ -#define PHY_ID_82555 0x02a80150 /* Intel 82555 */ -#define PHY_ID_QS6612 0x01814400 /* QS6612 */ -#define PHY_ID_AMD79C784 0x00225610 /* AMD 79C784 */ -#define PHY_ID_LSI80225 0x0016f870 /* LSI 80225 */ -#define PHY_ID_LSI80225B 0x0016f880 /* LSI 80225/B */ -#define PHY_ID_DP83848VV 0x20005C90 /* National 83848 */ -#define PHY_ID_DP83849 0x20005CA2 /* National 82849 */ -#define PHY_ID_KS8721BL 0x00221619 /* Micrel KS8721BL/SL */ - -#define STR_ID_LXT970 "LXT970" -#define STR_ID_LXT971 "LXT971" -#define STR_ID_82555 "Intel82555" -#define STR_ID_QS6612 "QS6612" -#define STR_ID_AMD79C784 "AMD79C784" -#define STR_ID_LSI80225 "LSI80225" -#define STR_ID_LSI80225B "LSI80225/B" -#define STR_ID_DP83848VV "N83848" -#define STR_ID_DP83849 "N83849" -#define STR_ID_KS8721BL "KS8721BL" - -/**************************************************************************** - * mii_init -- Initialize the MII for MII command without ethernet - * This function is a subset of eth_init - **************************************************************************** - */ -void mii_reset(struct fec_info_s *info) -{ - volatile fec_t *fecp = (fec_t *) (info->miibase); - int i; - - fecp->ecr = FEC_ECR_RESET; - for (i = 0; (fecp->ecr & FEC_ECR_RESET) && (i < FEC_RESET_DELAY); ++i) { - udelay(1); - } - if (i == FEC_RESET_DELAY) { - printf("FEC_RESET_DELAY timeout\n"); - } -} - -/* send command to phy using mii, wait for result */ -uint mii_send(uint mii_cmd) -{ - struct fec_info_s *info; - struct eth_device *dev; - volatile fec_t *ep; - uint mii_reply; - int j = 0; - - /* retrieve from register structure */ - dev = eth_get_dev(); - info = dev->priv; - - ep = (fec_t *) info->miibase; - - ep->mmfr = mii_cmd; /* command to phy */ - - /* wait for mii complete */ - while (!(ep->eir & FEC_EIR_MII) && (j < MCFFEC_TOUT_LOOP)) { - udelay(1); - j++; - } - if (j >= MCFFEC_TOUT_LOOP) { - printf("MII not complete\n"); - return -1; - } - - mii_reply = ep->mmfr; /* result from phy */ - ep->eir = FEC_EIR_MII; /* clear MII complete */ -#ifdef ET_DEBUG - printf("%s[%d] %s: sent=0x%8.8x, reply=0x%8.8x\n", - __FILE__, __LINE__, __FUNCTION__, mii_cmd, mii_reply); -#endif - - return (mii_reply & 0xffff); /* data read from phy */ -} -#endif /* CONFIG_SYS_DISCOVER_PHY || (CONFIG_COMMANDS & CONFIG_CMD_MII) */ - -#if defined(CONFIG_SYS_DISCOVER_PHY) -int mii_discover_phy(struct eth_device *dev) -{ -#define MAX_PHY_PASSES 11 - struct fec_info_s *info = dev->priv; - int phyaddr, pass; - uint phyno, phytype; - - if (info->phyname_init) - return info->phy_addr; - - phyaddr = -1; /* didn't find a PHY yet */ - for (pass = 1; pass <= MAX_PHY_PASSES && phyaddr < 0; ++pass) { - if (pass > 1) { - /* PHY may need more time to recover from reset. - * The LXT970 needs 50ms typical, no maximum is - * specified, so wait 10ms before try again. - * With 11 passes this gives it 100ms to wake up. - */ - udelay(10000); /* wait 10ms */ - } - - for (phyno = 0; phyno < 32 && phyaddr < 0; ++phyno) { - - phytype = mii_send(mk_mii_read(phyno, PHY_PHYIDR1)); -#ifdef ET_DEBUG - printf("PHY type 0x%x pass %d type\n", phytype, pass); -#endif - if (phytype != 0xffff) { - phyaddr = phyno; - phytype <<= 16; - phytype |= - mii_send(mk_mii_read(phyno, PHY_PHYIDR2)); - - switch (phytype & 0xffffffff) { - case PHY_ID_KS8721BL: - strcpy(info->phy_name, - STR_ID_KS8721BL); - info->phyname_init = 1; - break; - default: - strcpy(info->phy_name, "unknown"); - info->phyname_init = 1; - break; - } - -#ifdef ET_DEBUG - printf("PHY @ 0x%x pass %d type ", phyno, pass); - switch (phytype & 0xffffffff) { - case PHY_ID_KS8721BL: - printf(STR_ID_KS8721BL); - break; - default: - printf("0x%08x\n", phytype); - break; - } -#endif - } - } - } - if (phyaddr < 0) - printf("No PHY device found.\n"); - - return phyaddr; -} -#endif /* CONFIG_SYS_DISCOVER_PHY */ - -void mii_init(void) __attribute__((weak,alias("__mii_init"))); - -void __mii_init(void) -{ - volatile fec_t *fecp; - struct fec_info_s *info; - struct eth_device *dev; - int miispd = 0, i = 0; - u16 autoneg = 0; - - /* retrieve from register structure */ - dev = eth_get_dev(); - info = dev->priv; - - fecp = (fec_t *) info->miibase; - - fecpin_setclear(dev, 1); - - mii_reset(info); - - /* We use strictly polling mode only */ - fecp->eimr = 0; - - /* Clear any pending interrupt */ - fecp->eir = 0xffffffff; - - /* Set MII speed */ - miispd = (gd->bus_clk / 1000000) / 5; - fecp->mscr = miispd << 1; - - info->phy_addr = mii_discover_phy(dev); - -#define AUTONEGLINK (PHY_BMSR_AUTN_COMP | PHY_BMSR_LS) - while (i < MCFFEC_TOUT_LOOP) { - autoneg = 0; - miiphy_read(dev->name, info->phy_addr, PHY_BMSR, &autoneg); - i++; - - if ((autoneg & AUTONEGLINK) == AUTONEGLINK) - break; - - udelay(500); - } - if (i >= MCFFEC_TOUT_LOOP) { - printf("Auto Negotiation not complete\n"); - } - - /* adapt to the half/full speed settings */ - info->dup_spd = miiphy_duplex(dev->name, info->phy_addr) << 16; - info->dup_spd |= miiphy_speed(dev->name, info->phy_addr); -} - -/***************************************************************************** - * Read and write a MII PHY register, routines used by MII Utilities - * - * FIXME: These routines are expected to return 0 on success, but mii_send - * does _not_ return an error code. Maybe 0xFFFF means error, i.e. - * no PHY connected... - * For now always return 0. - * FIXME: These routines only work after calling eth_init() at least once! - * Otherwise they hang in mii_send() !!! Sorry! - *****************************************************************************/ - -int mcffec_miiphy_read(char *devname, unsigned char addr, unsigned char reg, - unsigned short *value) -{ - short rdreg; /* register working value */ - -#ifdef MII_DEBUG - printf("miiphy_read(0x%x) @ 0x%x = ", reg, addr); -#endif - rdreg = mii_send(mk_mii_read(addr, reg)); - - *value = rdreg; - -#ifdef MII_DEBUG - printf("0x%04x\n", *value); -#endif - - return 0; -} - -int mcffec_miiphy_write(char *devname, unsigned char addr, unsigned char reg, - unsigned short value) -{ - short rdreg; /* register working value */ - -#ifdef MII_DEBUG - printf("miiphy_write(0x%x) @ 0x%x = ", reg, addr); -#endif - - rdreg = mii_send(mk_mii_write(addr, reg, value)); - -#ifdef MII_DEBUG - printf("0x%04x\n", value); -#endif - - return 0; -} - -#endif /* CONFIG_CMD_NET, FEC_ENET & NET_MULTI */ diff --git a/board/freescale/m5282evb/Makefile b/board/freescale/m5282evb/Makefile index 2ec71ee1d2..424ab1cf9e 100644 --- a/board/freescale/m5282evb/Makefile +++ b/board/freescale/m5282evb/Makefile @@ -25,7 +25,7 @@ include $(TOPDIR)/config.mk LIB = $(obj)lib$(BOARD).a -COBJS = $(BOARD).o mii.o +COBJS = $(BOARD).o SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) OBJS := $(addprefix $(obj),$(COBJS)) diff --git a/board/freescale/m5282evb/mii.c b/board/freescale/m5282evb/mii.c deleted file mode 100644 index 7f925142c9..0000000000 --- a/board/freescale/m5282evb/mii.c +++ /dev/null @@ -1,304 +0,0 @@ -/* - * Copyright (C) 2004-2007 Freescale Semiconductor, Inc. - * TsiChung Liew (Tsi-Chung.Liew@freescale.com) - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include <common.h> -#include <asm/fec.h> -#include <asm/immap.h> - -#include <config.h> -#include <net.h> - -DECLARE_GLOBAL_DATA_PTR; - -#if defined(CONFIG_CMD_NET) && defined(CONFIG_NET_MULTI) -#undef MII_DEBUG -#undef ET_DEBUG - -int fecpin_setclear(struct eth_device *dev, int setclear) -{ - if (setclear) { - MCFGPIO_PASPAR |= 0x0F00; - MCFGPIO_PEHLPAR = CONFIG_SYS_PEHLPAR; - } else { - MCFGPIO_PASPAR &= 0xF0FF; - MCFGPIO_PEHLPAR &= ~CONFIG_SYS_PEHLPAR; - } - return 0; -} - -#if defined(CONFIG_SYS_DISCOVER_PHY) || defined(CONFIG_CMD_MII) -#include <miiphy.h> - -/* Make MII read/write commands for the FEC. */ -#define mk_mii_read(ADDR, REG) (0x60020000 | ((ADDR << 23) | (REG & 0x1f) << 18)) - -#define mk_mii_write(ADDR, REG, VAL) (0x50020000 | ((ADDR << 23) | (REG & 0x1f) << 18) | (VAL & 0xffff)) - -/* PHY identification */ -#define PHY_ID_LXT970 0x78100000 /* LXT970 */ -#define PHY_ID_LXT971 0x001378e0 /* LXT971 and 972 */ -#define PHY_ID_82555 0x02a80150 /* Intel 82555 */ -#define PHY_ID_QS6612 0x01814400 /* QS6612 */ -#define PHY_ID_AMD79C784 0x00225610 /* AMD 79C784 */ -#define PHY_ID_AMD79C874VC 0x0022561B /* AMD 79C874 */ -#define PHY_ID_LSI80225 0x0016f870 /* LSI 80225 */ -#define PHY_ID_LSI80225B 0x0016f880 /* LSI 80225/B */ -#define PHY_ID_DP83848VV 0x20005C90 /* National 83848 */ -#define PHY_ID_DP83849 0x20005CA2 /* National 82849 */ - -#define STR_ID_LXT970 "LXT970" -#define STR_ID_LXT971 "LXT971" -#define STR_ID_82555 "Intel82555" -#define STR_ID_QS6612 "QS6612" -#define STR_ID_AMD79C784 "AMD79C784" -#define STR_ID_AMD79C874VC "AMD79C874VC" -#define STR_ID_LSI80225 "LSI80225" -#define STR_ID_LSI80225B "LSI80225/B" -#define STR_ID_DP83848VV "N83848" -#define STR_ID_DP83849 "N83849" - -/**************************************************************************** - * mii_init -- Initialize the MII for MII command without ethernet - * This function is a subset of eth_init - **************************************************************************** - */ -void mii_reset(struct fec_info_s *info) -{ - volatile fec_t *fecp = (fec_t *) (info->miibase); - int i; - - fecp->ecr = FEC_ECR_RESET; - for (i = 0; (fecp->ecr & FEC_ECR_RESET) && (i < FEC_RESET_DELAY); ++i) { - udelay(1); - } - if (i == FEC_RESET_DELAY) { - printf("FEC_RESET_DELAY timeout\n"); - } -} - -/* send command to phy using mii, wait for result */ -uint mii_send(uint mii_cmd) -{ - struct fec_info_s *info; - struct eth_device *dev; - volatile fec_t *ep; - uint mii_reply; - int j = 0; - - /* retrieve from register structure */ - dev = eth_get_dev(); - info = dev->priv; - - ep = (fec_t *) info->miibase; - - ep->mmfr = mii_cmd; /* command to phy */ - - /* wait for mii complete */ - while (!(ep->eir & FEC_EIR_MII) && (j < MCFFEC_TOUT_LOOP)) { - udelay(1); - j++; - } - if (j >= MCFFEC_TOUT_LOOP) { - printf("MII not complete\n"); - return -1; - } - - mii_reply = ep->mmfr; /* result from phy */ - ep->eir = FEC_EIR_MII; /* clear MII complete */ -#ifdef ET_DEBUG - printf("%s[%d] %s: sent=0x%8.8x, reply=0x%8.8x\n", - __FILE__, __LINE__, __FUNCTION__, mii_cmd, mii_reply); -#endif - - return (mii_reply & 0xffff); /* data read from phy */ -} -#endif /* CONFIG_SYS_DISCOVER_PHY || CONFIG_CMD_MII */ - -#if defined(CONFIG_SYS_DISCOVER_PHY) -int mii_discover_phy(struct eth_device *dev) -{ -#define MAX_PHY_PASSES 11 - struct fec_info_s *info = dev->priv; - int phyaddr, pass; - uint phyno, phytype; - - if (info->phyname_init) - return info->phy_addr; - - phyaddr = -1; /* didn't find a PHY yet */ - for (pass = 1; pass <= MAX_PHY_PASSES && phyaddr < 0; ++pass) { - if (pass > 1) { - /* PHY may need more time to recover from reset. - * The LXT970 needs 50ms typical, no maximum is - * specified, so wait 10ms before try again. - * With 11 passes this gives it 100ms to wake up. - */ - udelay(10000); /* wait 10ms */ - } - - for (phyno = 0; phyno < 32 && phyaddr < 0; ++phyno) { - - phytype = mii_send(mk_mii_read(phyno, PHY_PHYIDR1)); -#ifdef ET_DEBUG - printf("PHY type 0x%x pass %d type\n", phytype, pass); -#endif - if (phytype != 0xffff) { - phyaddr = phyno; - phytype <<= 16; - phytype |= - mii_send(mk_mii_read(phyno, PHY_PHYIDR2)); - - switch (phytype & 0xffffffff) { - case PHY_ID_AMD79C874VC: - strcpy(info->phy_name, - STR_ID_AMD79C874VC); - info->phyname_init = 1; - break; - default: - strcpy(info->phy_name, "unknown"); - info->phyname_init = 1; - break; - } - -#ifdef ET_DEBUG - printf("PHY @ 0x%x pass %d type ", phyno, pass); - switch (phytype & 0xffffffff) { - case PHY_ID_AMD79C874VC: - printf(STR_ID_AMD79C874VC); - break; - default: - printf("0x%08x\n", phytype); - break; - } -#endif - } - } - } - if (phyaddr < 0) - printf("No PHY device found.\n"); - - return phyaddr; -} -#endif /* CONFIG_SYS_DISCOVER_PHY */ - -void mii_init(void) __attribute__((weak,alias("__mii_init"))); - -void __mii_init(void) -{ - volatile fec_t *fecp; - struct fec_info_s *info; - struct eth_device *dev; - int miispd = 0, i = 0; - u16 autoneg = 0; - - /* retrieve from register structure */ - dev = eth_get_dev(); - info = dev->priv; - - fecp = (fec_t *) info->miibase; - - fecpin_setclear(dev, 1); - - mii_reset(info); - - /* We use strictly polling mode only */ - fecp->eimr = 0; - - /* Clear any pending interrupt */ - fecp->eir = 0xffffffff; - - /* Set MII speed */ - miispd = (gd->bus_clk / 1000000) / 5; - fecp->mscr = miispd << 1; - - info->phy_addr = mii_discover_phy(dev); - -#define AUTONEGLINK (PHY_BMSR_AUTN_COMP | PHY_BMSR_LS) - while (i < MCFFEC_TOUT_LOOP) { - autoneg = 0; - miiphy_read(dev->name, info->phy_addr, PHY_BMSR, &autoneg); - i++; - - if ((autoneg & AUTONEGLINK) == AUTONEGLINK) - break; - - udelay(500); - } - if (i >= MCFFEC_TOUT_LOOP) { - printf("Auto Negotiation not complete\n"); - } - - /* adapt to the half/full speed settings */ - info->dup_spd = miiphy_duplex(dev->name, info->phy_addr) << 16; - info->dup_spd |= miiphy_speed(dev->name, info->phy_addr); -} - -/***************************************************************************** - * Read and write a MII PHY register, routines used by MII Utilities - * - * FIXME: These routines are expected to return 0 on success, but mii_send - * does _not_ return an error code. Maybe 0xFFFF means error, i.e. - * no PHY connected... - * For now always return 0. - * FIXME: These routines only work after calling eth_init() at least once! - * Otherwise they hang in mii_send() !!! Sorry! - *****************************************************************************/ - -int mcffec_miiphy_read(char *devname, unsigned char addr, unsigned char reg, - unsigned short *value) -{ - short rdreg; /* register working value */ - -#ifdef MII_DEBUG - printf("miiphy_read(0x%x) @ 0x%x = ", reg, addr); -#endif - rdreg = mii_send(mk_mii_read(addr, reg)); - - *value = rdreg; - -#ifdef MII_DEBUG - printf("0x%04x\n", *value); -#endif - - return 0; -} - -int mcffec_miiphy_write(char *devname, unsigned char addr, unsigned char reg, - unsigned short value) -{ - short rdreg; /* register working value */ - -#ifdef MII_DEBUG - printf("miiphy_write(0x%x) @ 0x%x = ", reg, addr); -#endif - - rdreg = mii_send(mk_mii_write(addr, reg, value)); - -#ifdef MII_DEBUG - printf("0x%04x\n", value); -#endif - - return 0; -} - -#endif /* CONFIG_CMD_NET, FEC_ENET & NET_MULTI */ diff --git a/board/freescale/m53017evb/Makefile b/board/freescale/m53017evb/Makefile new file mode 100644 index 0000000000..981763d205 --- /dev/null +++ b/board/freescale/m53017evb/Makefile @@ -0,0 +1,44 @@ +# +# (C) Copyright 2000-2003 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +include $(TOPDIR)/config.mk + +LIB = $(obj)lib$(BOARD).a + +COBJS = $(BOARD).o + +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) +SOBJS := $(addprefix $(obj),$(SOBJS)) + +$(LIB): $(obj).depend $(OBJS) + $(AR) $(ARFLAGS) $@ $(OBJS) + +######################################################################### + +# defines $(obj).depend target +include $(SRCTREE)/rules.mk + +sinclude $(obj).depend + +######################################################################### diff --git a/board/freescale/m53017evb/config.mk b/board/freescale/m53017evb/config.mk new file mode 100644 index 0000000000..ce014edca8 --- /dev/null +++ b/board/freescale/m53017evb/config.mk @@ -0,0 +1,25 @@ +# +# (C) Copyright 2000-2003 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# Coldfire contribution by Bernhard Kuhn <bkuhn@metrowerks.com> +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +TEXT_BASE = 0 diff --git a/board/freescale/m53017evb/m53017evb.c b/board/freescale/m53017evb/m53017evb.c new file mode 100644 index 0000000000..f331786bf7 --- /dev/null +++ b/board/freescale/m53017evb/m53017evb.c @@ -0,0 +1,94 @@ +/* + * (C) Copyright 2000-2003 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * Copyright (C) 2004-2008 Freescale Semiconductor, Inc. + * TsiChung Liew (Tsi-Chung.Liew@freescale.com) + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <config.h> +#include <common.h> +#include <asm/immap.h> + +DECLARE_GLOBAL_DATA_PTR; + +int checkboard(void) +{ + puts("Board: "); + puts("Freescale M53017EVB\n"); + return 0; +}; + +phys_size_t initdram(int board_type) +{ + volatile sdram_t *sdram = (volatile sdram_t *)(MMAP_SDRAM); + u32 dramsize, i; + + dramsize = CONFIG_SYS_SDRAM_SIZE * 0x100000; + + for (i = 0x13; i < 0x20; i++) { + if (dramsize == (1 << i)) + break; + } + i--; + + sdram->cs0 = (CONFIG_SYS_SDRAM_BASE | i); +#ifdef CONFIG_SYS_SDRAM_BASE1 + sdram->cs1 = (CONFIG_SYS_SDRAM_BASE | i); +#endif + sdram->cfg1 = CONFIG_SYS_SDRAM_CFG1; + sdram->cfg2 = CONFIG_SYS_SDRAM_CFG2; + + udelay(500); + + /* Issue PALL */ + sdram->ctrl = (CONFIG_SYS_SDRAM_CTRL | 2); + asm("nop"); + + /* Perform two refresh cycles */ + sdram->ctrl = CONFIG_SYS_SDRAM_CTRL | 4; + sdram->ctrl = CONFIG_SYS_SDRAM_CTRL | 4; + asm("nop"); + + /* Issue LEMR */ + sdram->mode = CONFIG_SYS_SDRAM_MODE; + asm("nop"); + sdram->mode = CONFIG_SYS_SDRAM_EMOD; + asm("nop"); + + sdram->ctrl = (CONFIG_SYS_SDRAM_CTRL | 2); + asm("nop"); + + sdram->ctrl = (CONFIG_SYS_SDRAM_CTRL & ~0x80000000) | 0x10000F00; + asm("nop"); + + udelay(100); + + return dramsize; +}; + +int testdram(void) +{ + /* TODO: XXX XXX XXX */ + printf("DRAM test not implemented!\n"); + + return (0); +} diff --git a/board/freescale/m54455evb/u-boot.lds b/board/freescale/m53017evb/u-boot.lds index bcf30c3532..dc531418c3 100644 --- a/board/freescale/m54455evb/u-boot.lds +++ b/board/freescale/m53017evb/u-boot.lds @@ -55,9 +55,9 @@ SECTIONS /* WARNING - the following is hand-optimized to fit within */ /* the sector layout of our flash chips! XXX FIXME XXX */ - cpu/mcf5445x/start.o (.text) - lib_m68k/traps.o (.text) - lib_m68k/interrupts.o (.text) + cpu/mcf532x/start.o (.text) + cpu/mcf532x/libmcf532x.a (.text) + lib_m68k/libm68k.a (.text) common/dlmalloc.o (.text) lib_generic/zlib.o (.text) diff --git a/board/freescale/m5329evb/Makefile b/board/freescale/m5329evb/Makefile index ab0f11e9d0..07b693c13e 100644 --- a/board/freescale/m5329evb/Makefile +++ b/board/freescale/m5329evb/Makefile @@ -25,7 +25,7 @@ include $(TOPDIR)/config.mk LIB = $(obj)lib$(BOARD).a -COBJS = $(BOARD).o mii.o nand.o +COBJS = $(BOARD).o nand.o SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) OBJS := $(addprefix $(obj),$(COBJS)) diff --git a/board/freescale/m5329evb/mii.c b/board/freescale/m5329evb/mii.c deleted file mode 100644 index c0f5817965..0000000000 --- a/board/freescale/m5329evb/mii.c +++ /dev/null @@ -1,306 +0,0 @@ -/* - * Copyright (C) 2004-2007 Freescale Semiconductor, Inc. - * TsiChung Liew (Tsi-Chung.Liew@freescale.com) - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include <common.h> -#include <asm/fec.h> -#include <asm/immap.h> - -#include <config.h> -#include <net.h> - -DECLARE_GLOBAL_DATA_PTR; - -#if defined(CONFIG_CMD_NET) && defined(CONFIG_NET_MULTI) -#undef MII_DEBUG -#undef ET_DEBUG - -int fecpin_setclear(struct eth_device *dev, int setclear) -{ - volatile gpio_t *gpio = (gpio_t *) MMAP_GPIO; - - if (setclear) { - gpio->par_fec |= GPIO_PAR_FEC_7W_FEC | GPIO_PAR_FEC_MII_FEC; - gpio->par_feci2c |= - GPIO_PAR_FECI2C_MDC_EMDC | GPIO_PAR_FECI2C_MDIO_EMDIO; - } else { - gpio->par_fec &= ~(GPIO_PAR_FEC_7W_FEC | GPIO_PAR_FEC_MII_FEC); - gpio->par_feci2c &= - ~(GPIO_PAR_FECI2C_MDC_EMDC | GPIO_PAR_FECI2C_MDIO_EMDIO); - } - return 0; -} - -#if defined(CONFIG_SYS_DISCOVER_PHY) || defined(CONFIG_CMD_MII) -#include <miiphy.h> - -/* Make MII read/write commands for the FEC. */ -#define mk_mii_read(ADDR, REG) (0x60020000 | ((ADDR << 23) | (REG & 0x1f) << 18)) - -#define mk_mii_write(ADDR, REG, VAL) (0x50020000 | ((ADDR << 23) | (REG & 0x1f) << 18) | (VAL & 0xffff)) - -/* PHY identification */ -#define PHY_ID_LXT970 0x78100000 /* LXT970 */ -#define PHY_ID_LXT971 0x001378e0 /* LXT971 and 972 */ -#define PHY_ID_82555 0x02a80150 /* Intel 82555 */ -#define PHY_ID_QS6612 0x01814400 /* QS6612 */ -#define PHY_ID_AMD79C784 0x00225610 /* AMD 79C784 */ -#define PHY_ID_LSI80225 0x0016f870 /* LSI 80225 */ -#define PHY_ID_LSI80225B 0x0016f880 /* LSI 80225/B */ -#define PHY_ID_DP83848VV 0x20005C90 /* National 83848 */ -#define PHY_ID_DP83849 0x20005CA2 /* National 82849 */ - -#define STR_ID_LXT970 "LXT970" -#define STR_ID_LXT971 "LXT971" -#define STR_ID_82555 "Intel82555" -#define STR_ID_QS6612 "QS6612" -#define STR_ID_AMD79C784 "AMD79C784" -#define STR_ID_LSI80225 "LSI80225" -#define STR_ID_LSI80225B "LSI80225/B" -#define STR_ID_DP83848VV "N83848" -#define STR_ID_DP83849 "N83849" - -/**************************************************************************** - * mii_init -- Initialize the MII for MII command without ethernet - * This function is a subset of eth_init - **************************************************************************** - */ -void mii_reset(struct fec_info_s *info) -{ - volatile fec_t *fecp = (fec_t *) (info->miibase); - int i; - - fecp->ecr = FEC_ECR_RESET; - for (i = 0; (fecp->ecr & FEC_ECR_RESET) && (i < FEC_RESET_DELAY); ++i) { - udelay(1); - } - if (i == FEC_RESET_DELAY) { - printf("FEC_RESET_DELAY timeout\n"); - } -} - -/* send command to phy using mii, wait for result */ -uint mii_send(uint mii_cmd) -{ - struct fec_info_s *info; - struct eth_device *dev; - volatile fec_t *ep; - uint mii_reply; - int j = 0; - - /* retrieve from register structure */ - dev = eth_get_dev(); - info = dev->priv; - - ep = (fec_t *) info->miibase; - - ep->mmfr = mii_cmd; /* command to phy */ - - /* wait for mii complete */ - while (!(ep->eir & FEC_EIR_MII) && (j < MCFFEC_TOUT_LOOP)) { - udelay(1); - j++; - } - if (j >= MCFFEC_TOUT_LOOP) { - printf("MII not complete\n"); - return -1; - } - - mii_reply = ep->mmfr; /* result from phy */ - ep->eir = FEC_EIR_MII; /* clear MII complete */ -#ifdef ET_DEBUG - printf("%s[%d] %s: sent=0x%8.8x, reply=0x%8.8x\n", - __FILE__, __LINE__, __FUNCTION__, mii_cmd, mii_reply); -#endif - - return (mii_reply & 0xffff); /* data read from phy */ -} -#endif /* CONFIG_SYS_DISCOVER_PHY || CONFIG_CMD_MII */ - -#if defined(CONFIG_SYS_DISCOVER_PHY) -int mii_discover_phy(struct eth_device *dev) -{ -#define MAX_PHY_PASSES 11 - struct fec_info_s *info = dev->priv; - int phyaddr, pass; - uint phyno, phytype; - - if (info->phyname_init) - return info->phy_addr; - - phyaddr = -1; /* didn't find a PHY yet */ - for (pass = 1; pass <= MAX_PHY_PASSES && phyaddr < 0; ++pass) { - if (pass > 1) { - /* PHY may need more time to recover from reset. - * The LXT970 needs 50ms typical, no maximum is - * specified, so wait 10ms before try again. - * With 11 passes this gives it 100ms to wake up. - */ - udelay(10000); /* wait 10ms */ - } - - for (phyno = 0; phyno < 32 && phyaddr < 0; ++phyno) { - - phytype = mii_send(mk_mii_read(phyno, PHY_PHYIDR1)); -#ifdef ET_DEBUG - printf("PHY type 0x%x pass %d type\n", phytype, pass); -#endif - if (phytype != 0xffff) { - phyaddr = phyno; - phytype <<= 16; - phytype |= - mii_send(mk_mii_read(phyno, PHY_PHYIDR2)); - - switch (phytype & 0xffffffff) { - case PHY_ID_DP83848VV: - strcpy(info->phy_name, - STR_ID_DP83848VV); - info->phyname_init = 1; - break; - default: - strcpy(info->phy_name, "unknown"); - info->phyname_init = 1; - break; - } - -#ifdef ET_DEBUG - printf("PHY @ 0x%x pass %d type ", phyno, pass); - switch (phytype & 0xffffffff) { - case PHY_ID_DP83848VV: - printf(STR_ID_DP83848VV); - break; - default: - printf("0x%08x\n", phytype); - break; - } -#endif - } - } - } - if (phyaddr < 0) - printf("No PHY device found.\n"); - - return phyaddr; -} -#endif /* CONFIG_SYS_DISCOVER_PHY */ - -void mii_init(void) __attribute__((weak,alias("__mii_init"))); - -void __mii_init(void) -{ - volatile fec_t *fecp; - struct fec_info_s *info; - struct eth_device *dev; - int miispd = 0, i = 0; - u16 autoneg = 0; - - /* retrieve from register structure */ - dev = eth_get_dev(); - info = dev->priv; - - fecp = (fec_t *) info->miibase; - - fecpin_setclear(dev, 1); - - mii_reset(info); - - /* We use strictly polling mode only */ - fecp->eimr = 0; - - /* Clear any pending interrupt */ - fecp->eir = 0xffffffff; - - /* Set MII speed */ - miispd = (gd->bus_clk / 1000000) / 5; - fecp->mscr = miispd << 1; - - info->phy_addr = mii_discover_phy(dev); - -#define AUTONEGLINK (PHY_BMSR_AUTN_COMP | PHY_BMSR_LS) - while (i < MCFFEC_TOUT_LOOP) { - autoneg = 0; - miiphy_read(dev->name, info->phy_addr, PHY_BMSR, &autoneg); - i++; - - if ((autoneg & AUTONEGLINK) == AUTONEGLINK) - break; - - udelay(500); - } - if (i >= MCFFEC_TOUT_LOOP) { - printf("Auto Negotiation not complete\n"); - } - - /* adapt to the half/full speed settings */ - info->dup_spd = miiphy_duplex(dev->name, info->phy_addr) << 16; - info->dup_spd |= miiphy_speed(dev->name, info->phy_addr); -} - -/***************************************************************************** - * Read and write a MII PHY register, routines used by MII Utilities - * - * FIXME: These routines are expected to return 0 on success, but mii_send - * does _not_ return an error code. Maybe 0xFFFF means error, i.e. - * no PHY connected... - * For now always return 0. - * FIXME: These routines only work after calling eth_init() at least once! - * Otherwise they hang in mii_send() !!! Sorry! - *****************************************************************************/ - -int mcffec_miiphy_read(char *devname, unsigned char addr, unsigned char reg, - unsigned short *value) -{ - short rdreg; /* register working value */ - -#ifdef MII_DEBUG - printf("miiphy_read(0x%x) @ 0x%x = ", reg, addr); -#endif - rdreg = mii_send(mk_mii_read(addr, reg)); - - *value = rdreg; - -#ifdef MII_DEBUG - printf("0x%04x\n", *value); -#endif - - return 0; -} - -int mcffec_miiphy_write(char *devname, unsigned char addr, unsigned char reg, - unsigned short value) -{ - short rdreg; /* register working value */ - -#ifdef MII_DEBUG - printf("miiphy_write(0x%x) @ 0x%x = ", reg, addr); -#endif - - rdreg = mii_send(mk_mii_write(addr, reg, value)); - -#ifdef MII_DEBUG - printf("0x%04x\n", value); -#endif - - return 0; -} - -#endif /* CONFIG_CMD_NET, FEC_ENET & NET_MULTI */ diff --git a/board/freescale/m5329evb/nand.c b/board/freescale/m5329evb/nand.c index 82492f69db..cf27dda2ff 100644 --- a/board/freescale/m5329evb/nand.c +++ b/board/freescale/m5329evb/nand.c @@ -36,56 +36,42 @@ DECLARE_GLOBAL_DATA_PTR; #include <linux/mtd/mtd.h> #define SET_CLE 0x10 -#define CLR_CLE ~SET_CLE #define SET_ALE 0x08 -#define CLR_ALE ~SET_ALE -static void nand_hwcontrol(struct mtd_info *mtd, int cmd, unsigned int ctrl) +static void nand_hwcontrol(struct mtd_info *mtdinfo, int cmd, unsigned int ctrl) { struct nand_chip *this = mtdinfo->priv; -/* volatile fbcs_t *fbcs = (fbcs_t *) MMAP_FBCS; TODO: handle wp */ - u32 nand_baseaddr = (u32) this->IO_ADDR_W; + volatile u16 *nCE = (u16 *) CONFIG_SYS_LATCH_ADDR; if (ctrl & NAND_CTRL_CHANGE) { - if ( ctrl & NAND_CLE ) - nand_baseaddr |= SET_CLE; - else - nand_baseaddr &= CLR_CLE; - if ( ctrl & NAND_ALE ) - nand_baseaddr |= SET_ALE; - else - nand_baseaddr &= CLR_ALE; - } - this->IO_ADDR_W = (void __iomem *)(nand_baseaddr); + ulong IO_ADDR_W = (ulong) this->IO_ADDR_W; - if (cmd != NAND_CMD_NONE) - writeb(cmd, this->IO_ADDR_W); -} + IO_ADDR_W &= ~(SET_ALE | SET_CLE); + *nCE &= 0xFFFB; -static void nand_write_byte(struct mtd_info *mtdinfo, u_char byte) -{ - struct nand_chip *this = mtdinfo->priv; - *((volatile u8 *)(this->IO_ADDR_W)) = byte; -} + if (ctrl & NAND_NCE) + *nCE |= 0x0004; + if (ctrl & NAND_CLE) + IO_ADDR_W |= SET_CLE; + if (ctrl & NAND_ALE) + IO_ADDR_W |= SET_ALE; -static u8 nand_read_byte(struct mtd_info *mtdinfo) -{ - struct nand_chip *this = mtdinfo->priv; - return (u8) (*((volatile u8 *)this->IO_ADDR_R)); -} + this->IO_ADDR_W = (void *)IO_ADDR_W; + } -static int nand_dev_ready(struct mtd_info *mtdinfo) -{ - return 1; + if (cmd != NAND_CMD_NONE) + writeb(cmd, this->IO_ADDR_W); } int board_nand_init(struct nand_chip *nand) { volatile gpio_t *gpio = (gpio_t *) MMAP_GPIO; - *((volatile u16 *)CONFIG_SYS_LATCH_ADDR) |= 0x0004; - - /* set up pin configuration */ + /* + * set up pin configuration - enabled 2nd output buffer's signals + * (nand_ngpio - nCE USB1/2_PWR_EN, LATCH_GPIOs, LCD_VEEEN, etc) + * to use nCE signal + */ gpio->par_timer &= ~GPIO_PAR_TIN3_TIN3; gpio->pddr_timer |= 0x08; gpio->ppd_timer |= 0x08; @@ -95,9 +81,6 @@ int board_nand_init(struct nand_chip *nand) nand->chip_delay = 50; nand->ecc.mode = NAND_ECC_SOFT; nand->cmd_ctrl = nand_hwcontrol; - nand->read_byte = nand_read_byte; - nand->write_byte = nand_write_byte; - nand->dev_ready = nand_dev_ready; return 0; } diff --git a/board/freescale/m5373evb/Makefile b/board/freescale/m5373evb/Makefile index ab0f11e9d0..07b693c13e 100644 --- a/board/freescale/m5373evb/Makefile +++ b/board/freescale/m5373evb/Makefile @@ -25,7 +25,7 @@ include $(TOPDIR)/config.mk LIB = $(obj)lib$(BOARD).a -COBJS = $(BOARD).o mii.o nand.o +COBJS = $(BOARD).o nand.o SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) OBJS := $(addprefix $(obj),$(COBJS)) diff --git a/board/freescale/m5373evb/mii.c b/board/freescale/m5373evb/mii.c deleted file mode 100644 index c0f5817965..0000000000 --- a/board/freescale/m5373evb/mii.c +++ /dev/null @@ -1,306 +0,0 @@ -/* - * Copyright (C) 2004-2007 Freescale Semiconductor, Inc. - * TsiChung Liew (Tsi-Chung.Liew@freescale.com) - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include <common.h> -#include <asm/fec.h> -#include <asm/immap.h> - -#include <config.h> -#include <net.h> - -DECLARE_GLOBAL_DATA_PTR; - -#if defined(CONFIG_CMD_NET) && defined(CONFIG_NET_MULTI) -#undef MII_DEBUG -#undef ET_DEBUG - -int fecpin_setclear(struct eth_device *dev, int setclear) -{ - volatile gpio_t *gpio = (gpio_t *) MMAP_GPIO; - - if (setclear) { - gpio->par_fec |= GPIO_PAR_FEC_7W_FEC | GPIO_PAR_FEC_MII_FEC; - gpio->par_feci2c |= - GPIO_PAR_FECI2C_MDC_EMDC | GPIO_PAR_FECI2C_MDIO_EMDIO; - } else { - gpio->par_fec &= ~(GPIO_PAR_FEC_7W_FEC | GPIO_PAR_FEC_MII_FEC); - gpio->par_feci2c &= - ~(GPIO_PAR_FECI2C_MDC_EMDC | GPIO_PAR_FECI2C_MDIO_EMDIO); - } - return 0; -} - -#if defined(CONFIG_SYS_DISCOVER_PHY) || defined(CONFIG_CMD_MII) -#include <miiphy.h> - -/* Make MII read/write commands for the FEC. */ -#define mk_mii_read(ADDR, REG) (0x60020000 | ((ADDR << 23) | (REG & 0x1f) << 18)) - -#define mk_mii_write(ADDR, REG, VAL) (0x50020000 | ((ADDR << 23) | (REG & 0x1f) << 18) | (VAL & 0xffff)) - -/* PHY identification */ -#define PHY_ID_LXT970 0x78100000 /* LXT970 */ -#define PHY_ID_LXT971 0x001378e0 /* LXT971 and 972 */ -#define PHY_ID_82555 0x02a80150 /* Intel 82555 */ -#define PHY_ID_QS6612 0x01814400 /* QS6612 */ -#define PHY_ID_AMD79C784 0x00225610 /* AMD 79C784 */ -#define PHY_ID_LSI80225 0x0016f870 /* LSI 80225 */ -#define PHY_ID_LSI80225B 0x0016f880 /* LSI 80225/B */ -#define PHY_ID_DP83848VV 0x20005C90 /* National 83848 */ -#define PHY_ID_DP83849 0x20005CA2 /* National 82849 */ - -#define STR_ID_LXT970 "LXT970" -#define STR_ID_LXT971 "LXT971" -#define STR_ID_82555 "Intel82555" -#define STR_ID_QS6612 "QS6612" -#define STR_ID_AMD79C784 "AMD79C784" -#define STR_ID_LSI80225 "LSI80225" -#define STR_ID_LSI80225B "LSI80225/B" -#define STR_ID_DP83848VV "N83848" -#define STR_ID_DP83849 "N83849" - -/**************************************************************************** - * mii_init -- Initialize the MII for MII command without ethernet - * This function is a subset of eth_init - **************************************************************************** - */ -void mii_reset(struct fec_info_s *info) -{ - volatile fec_t *fecp = (fec_t *) (info->miibase); - int i; - - fecp->ecr = FEC_ECR_RESET; - for (i = 0; (fecp->ecr & FEC_ECR_RESET) && (i < FEC_RESET_DELAY); ++i) { - udelay(1); - } - if (i == FEC_RESET_DELAY) { - printf("FEC_RESET_DELAY timeout\n"); - } -} - -/* send command to phy using mii, wait for result */ -uint mii_send(uint mii_cmd) -{ - struct fec_info_s *info; - struct eth_device *dev; - volatile fec_t *ep; - uint mii_reply; - int j = 0; - - /* retrieve from register structure */ - dev = eth_get_dev(); - info = dev->priv; - - ep = (fec_t *) info->miibase; - - ep->mmfr = mii_cmd; /* command to phy */ - - /* wait for mii complete */ - while (!(ep->eir & FEC_EIR_MII) && (j < MCFFEC_TOUT_LOOP)) { - udelay(1); - j++; - } - if (j >= MCFFEC_TOUT_LOOP) { - printf("MII not complete\n"); - return -1; - } - - mii_reply = ep->mmfr; /* result from phy */ - ep->eir = FEC_EIR_MII; /* clear MII complete */ -#ifdef ET_DEBUG - printf("%s[%d] %s: sent=0x%8.8x, reply=0x%8.8x\n", - __FILE__, __LINE__, __FUNCTION__, mii_cmd, mii_reply); -#endif - - return (mii_reply & 0xffff); /* data read from phy */ -} -#endif /* CONFIG_SYS_DISCOVER_PHY || CONFIG_CMD_MII */ - -#if defined(CONFIG_SYS_DISCOVER_PHY) -int mii_discover_phy(struct eth_device *dev) -{ -#define MAX_PHY_PASSES 11 - struct fec_info_s *info = dev->priv; - int phyaddr, pass; - uint phyno, phytype; - - if (info->phyname_init) - return info->phy_addr; - - phyaddr = -1; /* didn't find a PHY yet */ - for (pass = 1; pass <= MAX_PHY_PASSES && phyaddr < 0; ++pass) { - if (pass > 1) { - /* PHY may need more time to recover from reset. - * The LXT970 needs 50ms typical, no maximum is - * specified, so wait 10ms before try again. - * With 11 passes this gives it 100ms to wake up. - */ - udelay(10000); /* wait 10ms */ - } - - for (phyno = 0; phyno < 32 && phyaddr < 0; ++phyno) { - - phytype = mii_send(mk_mii_read(phyno, PHY_PHYIDR1)); -#ifdef ET_DEBUG - printf("PHY type 0x%x pass %d type\n", phytype, pass); -#endif - if (phytype != 0xffff) { - phyaddr = phyno; - phytype <<= 16; - phytype |= - mii_send(mk_mii_read(phyno, PHY_PHYIDR2)); - - switch (phytype & 0xffffffff) { - case PHY_ID_DP83848VV: - strcpy(info->phy_name, - STR_ID_DP83848VV); - info->phyname_init = 1; - break; - default: - strcpy(info->phy_name, "unknown"); - info->phyname_init = 1; - break; - } - -#ifdef ET_DEBUG - printf("PHY @ 0x%x pass %d type ", phyno, pass); - switch (phytype & 0xffffffff) { - case PHY_ID_DP83848VV: - printf(STR_ID_DP83848VV); - break; - default: - printf("0x%08x\n", phytype); - break; - } -#endif - } - } - } - if (phyaddr < 0) - printf("No PHY device found.\n"); - - return phyaddr; -} -#endif /* CONFIG_SYS_DISCOVER_PHY */ - -void mii_init(void) __attribute__((weak,alias("__mii_init"))); - -void __mii_init(void) -{ - volatile fec_t *fecp; - struct fec_info_s *info; - struct eth_device *dev; - int miispd = 0, i = 0; - u16 autoneg = 0; - - /* retrieve from register structure */ - dev = eth_get_dev(); - info = dev->priv; - - fecp = (fec_t *) info->miibase; - - fecpin_setclear(dev, 1); - - mii_reset(info); - - /* We use strictly polling mode only */ - fecp->eimr = 0; - - /* Clear any pending interrupt */ - fecp->eir = 0xffffffff; - - /* Set MII speed */ - miispd = (gd->bus_clk / 1000000) / 5; - fecp->mscr = miispd << 1; - - info->phy_addr = mii_discover_phy(dev); - -#define AUTONEGLINK (PHY_BMSR_AUTN_COMP | PHY_BMSR_LS) - while (i < MCFFEC_TOUT_LOOP) { - autoneg = 0; - miiphy_read(dev->name, info->phy_addr, PHY_BMSR, &autoneg); - i++; - - if ((autoneg & AUTONEGLINK) == AUTONEGLINK) - break; - - udelay(500); - } - if (i >= MCFFEC_TOUT_LOOP) { - printf("Auto Negotiation not complete\n"); - } - - /* adapt to the half/full speed settings */ - info->dup_spd = miiphy_duplex(dev->name, info->phy_addr) << 16; - info->dup_spd |= miiphy_speed(dev->name, info->phy_addr); -} - -/***************************************************************************** - * Read and write a MII PHY register, routines used by MII Utilities - * - * FIXME: These routines are expected to return 0 on success, but mii_send - * does _not_ return an error code. Maybe 0xFFFF means error, i.e. - * no PHY connected... - * For now always return 0. - * FIXME: These routines only work after calling eth_init() at least once! - * Otherwise they hang in mii_send() !!! Sorry! - *****************************************************************************/ - -int mcffec_miiphy_read(char *devname, unsigned char addr, unsigned char reg, - unsigned short *value) -{ - short rdreg; /* register working value */ - -#ifdef MII_DEBUG - printf("miiphy_read(0x%x) @ 0x%x = ", reg, addr); -#endif - rdreg = mii_send(mk_mii_read(addr, reg)); - - *value = rdreg; - -#ifdef MII_DEBUG - printf("0x%04x\n", *value); -#endif - - return 0; -} - -int mcffec_miiphy_write(char *devname, unsigned char addr, unsigned char reg, - unsigned short value) -{ - short rdreg; /* register working value */ - -#ifdef MII_DEBUG - printf("miiphy_write(0x%x) @ 0x%x = ", reg, addr); -#endif - - rdreg = mii_send(mk_mii_write(addr, reg, value)); - -#ifdef MII_DEBUG - printf("0x%04x\n", value); -#endif - - return 0; -} - -#endif /* CONFIG_CMD_NET, FEC_ENET & NET_MULTI */ diff --git a/board/freescale/m5373evb/nand.c b/board/freescale/m5373evb/nand.c index d01b819ec8..3ebef059e1 100644 --- a/board/freescale/m5373evb/nand.c +++ b/board/freescale/m5373evb/nand.c @@ -41,19 +41,21 @@ DECLARE_GLOBAL_DATA_PTR; static void nand_hwcontrol(struct mtd_info *mtdinfo, int cmd, unsigned int ctrl) { struct nand_chip *this = mtdinfo->priv; - volatile fbcs_t *fbcs = (fbcs_t *) MMAP_FBCS; - u32 nand_baseaddr = (u32) this->IO_ADDR_W; + volatile u16 *nCE = (u16 *) CONFIG_SYS_LATCH_ADDR; if (ctrl & NAND_CTRL_CHANGE) { ulong IO_ADDR_W = (ulong) this->IO_ADDR_W; - IO_ADDR_W &= ~(SET_ALE | SE_CLE); + IO_ADDR_W &= ~(SET_ALE | SET_CLE); + *nCE &= 0xFFFB; + + if (ctrl & NAND_NCE) + *nCE |= 0x0004; if (ctrl & NAND_CLE) IO_ADDR_W |= SET_CLE; if (ctrl & NAND_ALE) IO_ADDR_W |= SET_ALE; - at91_set_gpio_value(AT91_PIN_PD15, !(ctrl & NAND_NCE)); this->IO_ADDR_W = (void *)IO_ADDR_W; } @@ -67,10 +69,13 @@ int board_nand_init(struct nand_chip *nand) volatile gpio_t *gpio = (gpio_t *) MMAP_GPIO; volatile fbcs_t *fbcs = (fbcs_t *) MMAP_FBCS; - *((volatile u16 *)CONFIG_SYS_LATCH_ADDR) |= 0x0004; fbcs->csmr2 &= ~FBCS_CSMR_WP; - /* set up pin configuration */ + /* + * set up pin configuration - enabled 2nd output buffer's signals + * (nand_ngpio - nCE USB1/2_PWR_EN, LATCH_GPIOs, LCD_VEEEN, etc) + * to use nCE signal + */ gpio->par_timer &= ~GPIO_PAR_TIN3_TIN3; gpio->pddr_timer |= 0x08; gpio->ppd_timer |= 0x08; diff --git a/board/freescale/m54451evb/Makefile b/board/freescale/m54451evb/Makefile index 74c2528698..981763d205 100644 --- a/board/freescale/m54451evb/Makefile +++ b/board/freescale/m54451evb/Makefile @@ -25,7 +25,7 @@ include $(TOPDIR)/config.mk LIB = $(obj)lib$(BOARD).a -COBJS = $(BOARD).o mii.o +COBJS = $(BOARD).o SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) OBJS := $(addprefix $(obj),$(COBJS)) diff --git a/board/freescale/m54451evb/mii.c b/board/freescale/m54451evb/mii.c deleted file mode 100644 index 6e24736f18..0000000000 --- a/board/freescale/m54451evb/mii.c +++ /dev/null @@ -1,303 +0,0 @@ -/* - * Copyright (C) 2004-2007 Freescale Semiconductor, Inc. - * TsiChung Liew (Tsi-Chung.Liew@freescale.com) - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include <common.h> -#include <asm/fec.h> -#include <asm/immap.h> - -#include <config.h> -#include <net.h> - -DECLARE_GLOBAL_DATA_PTR; - -#if defined(CONFIG_CMD_NET) && defined(CONFIG_NET_MULTI) -#undef MII_DEBUG -#undef ET_DEBUG - -int fecpin_setclear(struct eth_device *dev, int setclear) -{ - volatile gpio_t *gpio = (gpio_t *) MMAP_GPIO; - struct fec_info_s *info = (struct fec_info_s *)dev->priv; - - if (setclear) { - gpio->par_feci2c |= - (GPIO_PAR_FECI2C_MDC0_MDC0 | GPIO_PAR_FECI2C_MDIO0_MDIO0); - - if (info->iobase == CONFIG_SYS_FEC0_IOBASE) - gpio->par_fec |= GPIO_PAR_FEC_FEC0_RMII_GPIO; - else - gpio->par_fec |= GPIO_PAR_FEC_FEC1_RMII_ATA; - } else { - gpio->par_feci2c &= - ~(GPIO_PAR_FECI2C_MDC0_MDC0 | GPIO_PAR_FECI2C_MDIO0_MDIO0); - - if (info->iobase == CONFIG_SYS_FEC0_IOBASE) - gpio->par_fec &= GPIO_PAR_FEC_FEC0_MASK; - else - gpio->par_fec &= GPIO_PAR_FEC_FEC1_MASK; - } - return 0; -} - -#if defined(CONFIG_SYS_DISCOVER_PHY) || defined(CONFIG_CMD_MII) -#include <miiphy.h> - -/* Make MII read/write commands for the FEC. */ -#define mk_mii_read(ADDR, REG) (0x60020000 | ((ADDR << 23) | (REG & 0x1f) << 18)) - -#define mk_mii_write(ADDR, REG, VAL) (0x50020000 | ((ADDR << 23) | (REG & 0x1f) << 18) | (VAL & 0xffff)) - -/* PHY identification */ -#define PHY_ID_KSZ8041NL 0x00221512 -#define STR_ID_KSZ8041NL "KSZ8041NL" - -/**************************************************************************** - * mii_init -- Initialize the MII for MII command without ethernet - * This function is a subset of eth_init - **************************************************************************** - */ -void mii_reset(struct fec_info_s *info) -{ - volatile fec_t *fecp = (fec_t *) (info->miibase); - struct eth_device *dev; - int i, miispd; - u16 rst = 0; - - dev = eth_get_dev(); - - miispd = (gd->bus_clk / 1000000) / 5; - fecp->mscr = miispd << 1; - - miiphy_write(dev->name, info->phy_addr, PHY_BMCR, PHY_BMCR_RESET); - for (i = 0; i < FEC_RESET_DELAY; ++i) { - udelay(500); - miiphy_read(dev->name, info->phy_addr, PHY_BMCR, &rst); - if ((rst & PHY_BMCR_RESET) == 0) - break; - } - if (i == FEC_RESET_DELAY) - printf("Mii reset timeout %d\n", i); -} - -/* send command to phy using mii, wait for result */ -uint mii_send(uint mii_cmd) -{ - struct fec_info_s *info; - struct eth_device *dev; - volatile fec_t *ep; - uint mii_reply; - int j = 0; - - /* retrieve from register structure */ - dev = eth_get_dev(); - info = dev->priv; - - ep = (fec_t *) info->miibase; - - ep->mmfr = mii_cmd; /* command to phy */ - - /* wait for mii complete */ - while (!(ep->eir & FEC_EIR_MII) && (j < MCFFEC_TOUT_LOOP)) { - udelay(1); - j++; - } - if (j >= MCFFEC_TOUT_LOOP) { - printf("MII not complete\n"); - return -1; - } - - mii_reply = ep->mmfr; /* result from phy */ - ep->eir = FEC_EIR_MII; /* clear MII complete */ -#ifdef ET_DEBUG - printf("%s[%d] %s: sent=0x%8.8x, reply=0x%8.8x\n", - __FILE__, __LINE__, __FUNCTION__, mii_cmd, mii_reply); -#endif - - return (mii_reply & 0xffff); /* data read from phy */ -} -#endif /* CONFIG_SYS_DISCOVER_PHY || (CONFIG_MII) */ - -#if defined(CONFIG_SYS_DISCOVER_PHY) -int mii_discover_phy(struct eth_device *dev) -{ -#define MAX_PHY_PASSES 11 - struct fec_info_s *info = dev->priv; - int phyaddr, pass; - uint phyno, phytype; - - if (info->phyname_init) - return info->phy_addr; - - phyaddr = -1; /* didn't find a PHY yet */ - for (pass = 1; pass <= MAX_PHY_PASSES && phyaddr < 0; ++pass) { - if (pass > 1) { - /* PHY may need more time to recover from reset. - * The LXT970 needs 50ms typical, no maximum is - * specified, so wait 10ms before try again. - * With 11 passes this gives it 100ms to wake up. - */ - udelay(10000); /* wait 10ms */ - } - - for (phyno = 0; phyno < 32 && phyaddr < 0; ++phyno) { - - phytype = mii_send(mk_mii_read(phyno, PHY_PHYIDR1)); -#ifdef ET_DEBUG - printf("PHY type 0x%x pass %d type\n", phytype, pass); -#endif - if (phytype != 0xffff) { - phyaddr = phyno; - phytype <<= 16; - phytype |= - mii_send(mk_mii_read(phyno, PHY_PHYIDR2)); - - switch (phytype & 0xffffffff) { - case PHY_ID_KSZ8041NL: - strcpy(info->phy_name, - STR_ID_KSZ8041NL); - info->phyname_init = 1; - break; - default: - strcpy(info->phy_name, "unknown"); - info->phyname_init = 1; - break; - } - -#ifdef ET_DEBUG - printf("PHY @ 0x%x pass %d type ", phyno, pass); - switch (phytype & 0xffffffff) { - case PHY_ID_KSZ8041NL: - printf(STR_ID_KSZ8041NL); - break; - default: - printf("0x%08x\n", phytype); - break; - } -#endif - } - } - } - if (phyaddr < 0) - printf("No PHY device found.\n"); - - return phyaddr; -} -#endif /* CONFIG_SYS_DISCOVER_PHY */ - -void mii_init(void) __attribute__ ((weak, alias("__mii_init"))); - -void __mii_init(void) -{ - volatile fec_t *fecp; - struct fec_info_s *info; - struct eth_device *dev; - int miispd = 0, i = 0; - u16 autoneg = 0; - - /* retrieve from register structure */ - dev = eth_get_dev(); - info = dev->priv; - - fecp = (fec_t *) info->miibase; - - /* We use strictly polling mode only */ - fecp->eimr = 0; - - /* Clear any pending interrupt */ - fecp->eir = 0xffffffff; - - /* Set MII speed */ - miispd = (gd->bus_clk / 1000000) / 5; - fecp->mscr = miispd << 1; - - info->phy_addr = mii_discover_phy(dev); - -#define AUTONEGLINK (PHY_BMSR_AUTN_COMP | PHY_BMSR_LS) - while (i < MCFFEC_TOUT_LOOP) { - autoneg = 0; - miiphy_read(dev->name, info->phy_addr, PHY_BMSR, &autoneg); - i++; - - if ((autoneg & AUTONEGLINK) == AUTONEGLINK) - break; - - udelay(500); - } - if (i >= MCFFEC_TOUT_LOOP) { - printf("Auto Negotiation not complete\n"); - } - - /* adapt to the half/full speed settings */ - info->dup_spd = miiphy_duplex(dev->name, info->phy_addr) << 16; - info->dup_spd |= miiphy_speed(dev->name, info->phy_addr); -} - -/***************************************************************************** - * Read and write a MII PHY register, routines used by MII Utilities - * - * FIXME: These routines are expected to return 0 on success, but mii_send - * does _not_ return an error code. Maybe 0xFFFF means error, i.e. - * no PHY connected... - * For now always return 0. - * FIXME: These routines only work after calling eth_init() at least once! - * Otherwise they hang in mii_send() !!! Sorry! - *****************************************************************************/ - -int mcffec_miiphy_read(char *devname, unsigned char addr, unsigned char reg, - unsigned short *value) -{ - short rdreg; /* register working value */ - -#ifdef MII_DEBUG - printf("miiphy_read(0x%x) @ 0x%x = ", reg, addr); -#endif - rdreg = mii_send(mk_mii_read(addr, reg)); - - *value = rdreg; - -#ifdef MII_DEBUG - printf("0x%04x\n", *value); -#endif - - return 0; -} - -int mcffec_miiphy_write(char *devname, unsigned char addr, unsigned char reg, - unsigned short value) -{ - short rdreg; /* register working value */ - -#ifdef MII_DEBUG - printf("miiphy_write(0x%x) @ 0x%x = ", reg, addr); -#endif - - rdreg = mii_send(mk_mii_write(addr, reg, value)); - -#ifdef MII_DEBUG - printf("0x%04x\n", value); -#endif - - return 0; -} - -#endif /* CONFIG_CMD_NET, FEC_ENET & NET_MULTI */ diff --git a/board/freescale/m54455evb/Makefile b/board/freescale/m54455evb/Makefile index 74c2528698..981763d205 100644 --- a/board/freescale/m54455evb/Makefile +++ b/board/freescale/m54455evb/Makefile @@ -25,7 +25,7 @@ include $(TOPDIR)/config.mk LIB = $(obj)lib$(BOARD).a -COBJS = $(BOARD).o mii.o +COBJS = $(BOARD).o SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) OBJS := $(addprefix $(obj),$(COBJS)) diff --git a/board/freescale/m54455evb/mii.c b/board/freescale/m54455evb/mii.c deleted file mode 100644 index c19519144c..0000000000 --- a/board/freescale/m54455evb/mii.c +++ /dev/null @@ -1,324 +0,0 @@ -/* - * Copyright (C) 2004-2007 Freescale Semiconductor, Inc. - * TsiChung Liew (Tsi-Chung.Liew@freescale.com) - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include <common.h> -#include <asm/fec.h> -#include <asm/immap.h> - -#include <config.h> -#include <net.h> - -DECLARE_GLOBAL_DATA_PTR; - -#if defined(CONFIG_CMD_NET) && defined(CONFIG_NET_MULTI) -#undef MII_DEBUG -#undef ET_DEBUG - -int fecpin_setclear(struct eth_device *dev, int setclear) -{ - volatile gpio_t *gpio = (gpio_t *) MMAP_GPIO; - struct fec_info_s *info = (struct fec_info_s *)dev->priv; - - if (setclear) { - gpio->par_feci2c |= - (GPIO_PAR_FECI2C_MDC0_MDC0 | GPIO_PAR_FECI2C_MDIO0_MDIO0); - - if (info->iobase == CONFIG_SYS_FEC0_IOBASE) - gpio->par_fec |= GPIO_PAR_FEC_FEC0_RMII_GPIO; - else - gpio->par_fec |= GPIO_PAR_FEC_FEC1_RMII_ATA; - } else { - gpio->par_feci2c &= - ~(GPIO_PAR_FECI2C_MDC0_MDC0 | GPIO_PAR_FECI2C_MDIO0_MDIO0); - - if (info->iobase == CONFIG_SYS_FEC0_IOBASE) - gpio->par_fec &= GPIO_PAR_FEC_FEC0_MASK; - else - gpio->par_fec &= GPIO_PAR_FEC_FEC1_MASK; - } - return 0; -} - -#if defined(CONFIG_SYS_DISCOVER_PHY) || defined(CONFIG_CMD_MII) -#include <miiphy.h> - -/* Make MII read/write commands for the FEC. */ -#define mk_mii_read(ADDR, REG) (0x60020000 | ((ADDR << 23) | (REG & 0x1f) << 18)) - -#define mk_mii_write(ADDR, REG, VAL) (0x50020000 | ((ADDR << 23) | (REG & 0x1f) << 18) | (VAL & 0xffff)) - -/* PHY identification */ -#define PHY_ID_LXT970 0x78100000 /* LXT970 */ -#define PHY_ID_LXT971 0x001378e0 /* LXT971 and 972 */ -#define PHY_ID_82555 0x02a80150 /* Intel 82555 */ -#define PHY_ID_QS6612 0x01814400 /* QS6612 */ -#define PHY_ID_AMD79C784 0x00225610 /* AMD 79C784 */ -#define PHY_ID_LSI80225 0x0016f870 /* LSI 80225 */ -#define PHY_ID_LSI80225B 0x0016f880 /* LSI 80225/B */ -#define PHY_ID_DP83848VV 0x20005C90 /* National 83848 */ -#define PHY_ID_DP83849 0x20005CA2 /* National 82849 */ - -#define STR_ID_LXT970 "LXT970" -#define STR_ID_LXT971 "LXT971" -#define STR_ID_82555 "Intel82555" -#define STR_ID_QS6612 "QS6612" -#define STR_ID_AMD79C784 "AMD79C784" -#define STR_ID_LSI80225 "LSI80225" -#define STR_ID_LSI80225B "LSI80225/B" -#define STR_ID_DP83848VV "N83848" -#define STR_ID_DP83849 "N83849" - -/**************************************************************************** - * mii_init -- Initialize the MII for MII command without ethernet - * This function is a subset of eth_init - **************************************************************************** - */ -void mii_reset(struct fec_info_s *info) -{ - volatile fec_t *fecp = (fec_t *) (info->miibase); - struct eth_device *dev; - int i, miispd; - u16 rst = 0; - - dev = eth_get_dev(); - - miispd = (gd->bus_clk / 1000000) / 5; - fecp->mscr = miispd << 1; - - miiphy_write(dev->name, info->phy_addr, PHY_BMCR, PHY_BMCR_RESET); - for (i = 0; i < FEC_RESET_DELAY; ++i) { - udelay(500); - miiphy_read(dev->name, info->phy_addr, PHY_BMCR, &rst); - if ((rst & PHY_BMCR_RESET) == 0) - break; - } - if (i == FEC_RESET_DELAY) - printf("Mii reset timeout %d\n", i); -} - -/* send command to phy using mii, wait for result */ -uint mii_send(uint mii_cmd) -{ - struct fec_info_s *info; - struct eth_device *dev; - volatile fec_t *ep; - uint mii_reply; - int j = 0; - - /* retrieve from register structure */ - dev = eth_get_dev(); - info = dev->priv; - - ep = (fec_t *) info->miibase; - - ep->mmfr = mii_cmd; /* command to phy */ - - /* wait for mii complete */ - while (!(ep->eir & FEC_EIR_MII) && (j < MCFFEC_TOUT_LOOP)) { - udelay(1); - j++; - } - if (j >= MCFFEC_TOUT_LOOP) { - printf("MII not complete\n"); - return -1; - } - - mii_reply = ep->mmfr; /* result from phy */ - ep->eir = FEC_EIR_MII; /* clear MII complete */ -#ifdef ET_DEBUG - printf("%s[%d] %s: sent=0x%8.8x, reply=0x%8.8x\n", - __FILE__, __LINE__, __FUNCTION__, mii_cmd, mii_reply); -#endif - - return (mii_reply & 0xffff); /* data read from phy */ -} -#endif /* CONFIG_SYS_DISCOVER_PHY || (CONFIG_MII) */ - -#if defined(CONFIG_SYS_DISCOVER_PHY) -int mii_discover_phy(struct eth_device *dev) -{ -#define MAX_PHY_PASSES 11 - struct fec_info_s *info = dev->priv; - int phyaddr, pass; - uint phyno, phytype; - - if (info->phyname_init) - return info->phy_addr; - - phyaddr = -1; /* didn't find a PHY yet */ - for (pass = 1; pass <= MAX_PHY_PASSES && phyaddr < 0; ++pass) { - if (pass > 1) { - /* PHY may need more time to recover from reset. - * The LXT970 needs 50ms typical, no maximum is - * specified, so wait 10ms before try again. - * With 11 passes this gives it 100ms to wake up. - */ - udelay(10000); /* wait 10ms */ - } - - for (phyno = 0; phyno < 32 && phyaddr < 0; ++phyno) { - - phytype = mii_send(mk_mii_read(phyno, PHY_PHYIDR1)); -#ifdef ET_DEBUG - printf("PHY type 0x%x pass %d type\n", phytype, pass); -#endif - if (phytype != 0xffff) { - phyaddr = phyno; - phytype <<= 16; - phytype |= - mii_send(mk_mii_read(phyno, PHY_PHYIDR2)); - - switch (phytype & 0xffffffff) { - case PHY_ID_DP83848VV: - strcpy(info->phy_name, - STR_ID_DP83848VV); - info->phyname_init = 1; - break; - default: - strcpy(info->phy_name, "unknown"); - info->phyname_init = 1; - break; - } - -#ifdef ET_DEBUG - printf("PHY @ 0x%x pass %d type ", phyno, pass); - switch (phytype & 0xffffffff) { - case PHY_ID_DP83848VV: - printf(STR_ID_DP83848VV); - break; - default: - printf("0x%08x\n", phytype); - break; - } -#endif - } - } - } - if (phyaddr < 0) - printf("No PHY device found.\n"); - - return phyaddr; -} -#endif /* CONFIG_SYS_DISCOVER_PHY */ - -void mii_init(void) __attribute__((weak,alias("__mii_init"))); - -void __mii_init(void) -{ - volatile fec_t *fecp; - struct fec_info_s *info; - struct eth_device *dev; - int miispd = 0, i = 0; - u16 autoneg = 0; - - /* retrieve from register structure */ - dev = eth_get_dev(); - info = dev->priv; - - fecp = (fec_t *) info->miibase; - - fecpin_setclear(dev, 1); - - mii_reset(info); - - /* We use strictly polling mode only */ - fecp->eimr = 0; - - /* Clear any pending interrupt */ - fecp->eir = 0xffffffff; - - /* Set MII speed */ - miispd = (gd->bus_clk / 1000000) / 5; - fecp->mscr = miispd << 1; - - info->phy_addr = mii_discover_phy(dev); - -#define AUTONEGLINK (PHY_BMSR_AUTN_COMP | PHY_BMSR_LS) - while (i < MCFFEC_TOUT_LOOP) { - autoneg = 0; - miiphy_read(dev->name, info->phy_addr, PHY_BMSR, &autoneg); - i++; - - if ((autoneg & AUTONEGLINK) == AUTONEGLINK) - break; - - udelay(500); - } - if (i >= MCFFEC_TOUT_LOOP) { - printf("Auto Negotiation not complete\n"); - } - - /* adapt to the half/full speed settings */ - info->dup_spd = miiphy_duplex(dev->name, info->phy_addr) << 16; - info->dup_spd |= miiphy_speed(dev->name, info->phy_addr); -} - -/***************************************************************************** - * Read and write a MII PHY register, routines used by MII Utilities - * - * FIXME: These routines are expected to return 0 on success, but mii_send - * does _not_ return an error code. Maybe 0xFFFF means error, i.e. - * no PHY connected... - * For now always return 0. - * FIXME: These routines only work after calling eth_init() at least once! - * Otherwise they hang in mii_send() !!! Sorry! - *****************************************************************************/ - -int mcffec_miiphy_read(char *devname, unsigned char addr, unsigned char reg, - unsigned short *value) -{ - short rdreg; /* register working value */ - -#ifdef MII_DEBUG - printf("miiphy_read(0x%x) @ 0x%x = ", reg, addr); -#endif - rdreg = mii_send(mk_mii_read(addr, reg)); - - *value = rdreg; - -#ifdef MII_DEBUG - printf("0x%04x\n", *value); -#endif - - return 0; -} - -int mcffec_miiphy_write(char *devname, unsigned char addr, unsigned char reg, - unsigned short value) -{ - short rdreg; /* register working value */ - -#ifdef MII_DEBUG - printf("miiphy_write(0x%x) @ 0x%x = ", reg, addr); -#endif - - rdreg = mii_send(mk_mii_write(addr, reg, value)); - -#ifdef MII_DEBUG - printf("0x%04x\n", value); -#endif - - return 0; -} - -#endif /* CONFIG_CMD_NET, FEC_ENET & NET_MULTI */ diff --git a/board/freescale/m547xevb/Makefile b/board/freescale/m547xevb/Makefile index 74c2528698..981763d205 100644 --- a/board/freescale/m547xevb/Makefile +++ b/board/freescale/m547xevb/Makefile @@ -25,7 +25,7 @@ include $(TOPDIR)/config.mk LIB = $(obj)lib$(BOARD).a -COBJS = $(BOARD).o mii.o +COBJS = $(BOARD).o SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) OBJS := $(addprefix $(obj),$(COBJS)) diff --git a/board/freescale/m547xevb/mii.c b/board/freescale/m547xevb/mii.c deleted file mode 100644 index 4d11506d4a..0000000000 --- a/board/freescale/m547xevb/mii.c +++ /dev/null @@ -1,322 +0,0 @@ -/* - * Copyright (C) 2004-2007 Freescale Semiconductor, Inc. - * TsiChung Liew (Tsi-Chung.Liew@freescale.com) - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include <common.h> -#include <config.h> -#include <net.h> - -#include <asm/immap.h> -#include <asm/fec.h> -#include <asm/fsl_mcdmafec.h> - -DECLARE_GLOBAL_DATA_PTR; - -#if defined(CONFIG_CMD_NET) && defined(CONFIG_NET_MULTI) -#undef MII_DEBUG -#undef ET_DEBUG - -int fecpin_setclear(struct eth_device *dev, int setclear) -{ - volatile gpio_t *gpio = (gpio_t *) MMAP_GPIO; - struct fec_info_dma *info = (struct fec_info_dma *)dev->priv; - - if (setclear) { - if (info->iobase == CONFIG_SYS_FEC0_IOBASE) - gpio->par_feci2cirq |= 0xF000; - else - gpio->par_feci2cirq |= 0x0FC0; - } else { - if (info->iobase == CONFIG_SYS_FEC0_IOBASE) - gpio->par_feci2cirq &= 0x0FFF; - else - gpio->par_feci2cirq &= 0xF03F; - } - return 0; -} - -#if defined(CONFIG_SYS_DISCOVER_PHY) || defined(CONFIG_CMD_MII) -#include <miiphy.h> - -/* Make MII read/write commands for the FEC. */ -#define mk_mii_read(ADDR, REG) (0x60020000 | ((ADDR << 23) | (REG & 0x1f) << 18)) - -#define mk_mii_write(ADDR, REG, VAL) (0x50020000 | ((ADDR << 23) | (REG & 0x1f) << 18) | (VAL & 0xffff)) - -/* PHY identification */ -#define PHY_ID_LXT970 0x78100000 /* LXT970 */ -#define PHY_ID_LXT971 0x001378e0 /* LXT971 and 972 */ -#define PHY_ID_82555 0x02a80150 /* Intel 82555 */ -#define PHY_ID_QS6612 0x01814400 /* QS6612 */ -#define PHY_ID_AMD79C784 0x00225610 /* AMD 79C784 */ -#define PHY_ID_LSI80225 0x0016f870 /* LSI 80225 */ -#define PHY_ID_LSI80225B 0x0016f880 /* LSI 80225/B */ -#define PHY_ID_DP83848VV 0x20005C90 /* National 83848 */ -#define PHY_ID_DP83849 0x20005CA2 /* National 82849 */ -#define PHY_ID_BCM5222 0x00406322 /* Broadcom 5222 */ - -#define STR_ID_LXT970 "LXT970" -#define STR_ID_LXT971 "LXT971" -#define STR_ID_82555 "Intel82555" -#define STR_ID_QS6612 "QS6612" -#define STR_ID_AMD79C784 "AMD79C784" -#define STR_ID_LSI80225 "LSI80225" -#define STR_ID_LSI80225B "LSI80225/B" -#define STR_ID_DP83848VV "N83848" -#define STR_ID_DP83849 "N83849" -#define STR_ID_BCM5222 "BCM5222" - -/**************************************************************************** - * mii_init -- Initialize the MII for MII command without ethernet - * This function is a subset of eth_init - **************************************************************************** - */ -void mii_reset(struct fec_info_dma *info) -{ - volatile fecdma_t *fecp = (fecdma_t *) (info->miibase); - int i; - - fecp->ecr = FEC_ECR_RESET; - for (i = 0; (fecp->ecr & FEC_ECR_RESET) && (i < FEC_RESET_DELAY); ++i) { - udelay(1); - } - if (i == FEC_RESET_DELAY) { - printf("FEC_RESET_DELAY timeout\n"); - } -} - -/* send command to phy using mii, wait for result */ -uint mii_send(uint mii_cmd) -{ - struct fec_info_dma *info; - struct eth_device *dev; - volatile fecdma_t *ep; - uint mii_reply; - int j = 0; - - /* retrieve from register structure */ - dev = eth_get_dev(); - info = dev->priv; - - ep = (fecdma_t *) info->miibase; - - ep->mmfr = mii_cmd; /* command to phy */ - - /* wait for mii complete */ - while (!(ep->eir & FEC_EIR_MII) && (j < MCFFEC_TOUT_LOOP)) { - udelay(1); - j++; - } - if (j >= MCFFEC_TOUT_LOOP) { - printf("MII not complete\n"); - return -1; - } - - mii_reply = ep->mmfr; /* result from phy */ - ep->eir = FEC_EIR_MII; /* clear MII complete */ -#ifdef ET_DEBUG - printf("%s[%d] %s: sent=0x%8.8x, reply=0x%8.8x\n", - __FILE__, __LINE__, __FUNCTION__, mii_cmd, mii_reply); -#endif - - return (mii_reply & 0xffff); /* data read from phy */ -} -#endif /* CONFIG_SYS_DISCOVER_PHY || CONFIG_CMD_MII */ - -#if defined(CONFIG_SYS_DISCOVER_PHY) -int mii_discover_phy(struct eth_device *dev) -{ -#define MAX_PHY_PASSES 11 - struct fec_info_dma *info = dev->priv; - int phyaddr, pass, temp; - uint phyno, phytype; - - if (info->phyname_init) { - return info->phy_addr; - } - - phyaddr = -1; /* didn't find a PHY yet */ - for (pass = 1; pass <= MAX_PHY_PASSES && phyaddr < 0; ++pass) { - if (pass > 1) { - /* PHY may need more time to recover from reset. - * The LXT970 needs 50ms typical, no maximum is - * specified, so wait 10ms before try again. - * With 11 passes this gives it 100ms to wake up. - */ - udelay(10000); /* wait 10ms */ - } - - temp = 0; - if (info->index > 0) { - /* Some phy have multiple address, to solve the issue - where phyno keeps starting from 0, check the - previous phy address if both miibase are the same. */ - if (info->miibase == (info->next)->miibase) { - temp = (info->next)->phy_addr + 1; - } - } - - for (phyno = temp; phyno < 32 && phyaddr < 0; ++phyno) { - - phytype = mii_send(mk_mii_read(phyno, PHY_PHYIDR1)); -#ifdef ET_DEBUG - printf("PHY type 0x%x pass %d type\n", phytype, pass); -#endif - if (phytype != 0xffff) { - phyaddr = phyno; - phytype <<= 16; - phytype |= - mii_send(mk_mii_read(phyno, PHY_PHYIDR2)); - - switch (phytype & 0xffffffff) { - case PHY_ID_BCM5222: - strcpy(info->phy_name, STR_ID_BCM5222); - info->phyname_init = 1; - break; - default: - strcpy(info->phy_name, "unknown"); - info->phyname_init = 1; - break; - } - -#ifdef ET_DEBUG - printf("PHY @ 0x%x pass %d type ", phyno, pass); - switch (phytype & 0xffffffff) { - case PHY_ID_BCM5222: - printf(STR_ID_BCM5222); - break; - default: - printf("0x%08x\n", phytype); - break; - } -#endif - } - } - } - if (phyaddr < 0) - printf("No PHY device found.\n"); - - return phyaddr; -} -#endif /* CONFIG_SYS_DISCOVER_PHY */ - -void mii_init(void) __attribute__ ((weak, alias("__mii_init"))); - -void __mii_init(void) -{ - volatile fecdma_t *fecp; - struct fec_info_dma *info; - struct eth_device *dev; - int miispd = 0, i = 0; - u16 autoneg = 0; - - /* retrieve from register structure */ - dev = eth_get_dev(); - info = dev->priv; - - fecp = (fecdma_t *) info->miibase; - - fecpin_setclear(dev, 1); - - mii_reset(info); - - /* We use strictly polling mode only */ - fecp->eimr = 0; - - /* Clear any pending interrupt */ - fecp->eir = 0xffffffff; - - /* Set MII speed */ - miispd = (gd->bus_clk / 1000000) / 5; - fecp->mscr = miispd << 1; - - info->phy_addr = mii_discover_phy(dev); - -#define AUTONEGLINK (PHY_BMSR_AUTN_COMP | PHY_BMSR_LS) - while (i < MCFFEC_TOUT_LOOP) { - autoneg = 0; - miiphy_read(dev->name, info->phy_addr, PHY_BMSR, &autoneg); - i++; - - if ((autoneg & AUTONEGLINK) == AUTONEGLINK) - break; - - udelay(500); - } - if (i >= MCFFEC_TOUT_LOOP) { - printf("Auto Negotiation not complete\n"); - } - - /* adapt to the half/full speed settings */ - info->dup_spd = miiphy_duplex(dev->name, info->phy_addr) << 16; - info->dup_spd |= miiphy_speed(dev->name, info->phy_addr); -} - -/***************************************************************************** - * Read and write a MII PHY register, routines used by MII Utilities - * - * FIXME: These routines are expected to return 0 on success, but mii_send - * does _not_ return an error code. Maybe 0xFFFF means error, i.e. - * no PHY connected... - * For now always return 0. - * FIXME: These routines only work after calling eth_init() at least once! - * Otherwise they hang in mii_send() !!! Sorry! - *****************************************************************************/ - -int mcffec_miiphy_read(char *devname, unsigned char addr, unsigned char reg, - unsigned short *value) -{ - short rdreg; /* register working value */ - -#ifdef MII_DEBUG - printf("miiphy_read(0x%x) @ 0x%x = ", reg, addr); -#endif - rdreg = mii_send(mk_mii_read(addr, reg)); - - *value = rdreg; - -#ifdef MII_DEBUG - printf("0x%04x\n", *value); -#endif - - return 0; -} - -int mcffec_miiphy_write(char *devname, unsigned char addr, unsigned char reg, - unsigned short value) -{ - short rdreg; /* register working value */ - -#ifdef MII_DEBUG - printf("miiphy_write(0x%x) @ 0x%x = ", reg, addr); -#endif - - rdreg = mii_send(mk_mii_write(addr, reg, value)); - -#ifdef MII_DEBUG - printf("0x%04x\n", value); -#endif - - return 0; -} - -#endif /* CONFIG_CMD_NET, FEC_ENET & NET_MULTI */ diff --git a/board/freescale/m548xevb/Makefile b/board/freescale/m548xevb/Makefile index 74c2528698..981763d205 100644 --- a/board/freescale/m548xevb/Makefile +++ b/board/freescale/m548xevb/Makefile @@ -25,7 +25,7 @@ include $(TOPDIR)/config.mk LIB = $(obj)lib$(BOARD).a -COBJS = $(BOARD).o mii.o +COBJS = $(BOARD).o SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) OBJS := $(addprefix $(obj),$(COBJS)) diff --git a/board/freescale/m548xevb/mii.c b/board/freescale/m548xevb/mii.c deleted file mode 100644 index 4d11506d4a..0000000000 --- a/board/freescale/m548xevb/mii.c +++ /dev/null @@ -1,322 +0,0 @@ -/* - * Copyright (C) 2004-2007 Freescale Semiconductor, Inc. - * TsiChung Liew (Tsi-Chung.Liew@freescale.com) - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include <common.h> -#include <config.h> -#include <net.h> - -#include <asm/immap.h> -#include <asm/fec.h> -#include <asm/fsl_mcdmafec.h> - -DECLARE_GLOBAL_DATA_PTR; - -#if defined(CONFIG_CMD_NET) && defined(CONFIG_NET_MULTI) -#undef MII_DEBUG -#undef ET_DEBUG - -int fecpin_setclear(struct eth_device *dev, int setclear) -{ - volatile gpio_t *gpio = (gpio_t *) MMAP_GPIO; - struct fec_info_dma *info = (struct fec_info_dma *)dev->priv; - - if (setclear) { - if (info->iobase == CONFIG_SYS_FEC0_IOBASE) - gpio->par_feci2cirq |= 0xF000; - else - gpio->par_feci2cirq |= 0x0FC0; - } else { - if (info->iobase == CONFIG_SYS_FEC0_IOBASE) - gpio->par_feci2cirq &= 0x0FFF; - else - gpio->par_feci2cirq &= 0xF03F; - } - return 0; -} - -#if defined(CONFIG_SYS_DISCOVER_PHY) || defined(CONFIG_CMD_MII) -#include <miiphy.h> - -/* Make MII read/write commands for the FEC. */ -#define mk_mii_read(ADDR, REG) (0x60020000 | ((ADDR << 23) | (REG & 0x1f) << 18)) - -#define mk_mii_write(ADDR, REG, VAL) (0x50020000 | ((ADDR << 23) | (REG & 0x1f) << 18) | (VAL & 0xffff)) - -/* PHY identification */ -#define PHY_ID_LXT970 0x78100000 /* LXT970 */ -#define PHY_ID_LXT971 0x001378e0 /* LXT971 and 972 */ -#define PHY_ID_82555 0x02a80150 /* Intel 82555 */ -#define PHY_ID_QS6612 0x01814400 /* QS6612 */ -#define PHY_ID_AMD79C784 0x00225610 /* AMD 79C784 */ -#define PHY_ID_LSI80225 0x0016f870 /* LSI 80225 */ -#define PHY_ID_LSI80225B 0x0016f880 /* LSI 80225/B */ -#define PHY_ID_DP83848VV 0x20005C90 /* National 83848 */ -#define PHY_ID_DP83849 0x20005CA2 /* National 82849 */ -#define PHY_ID_BCM5222 0x00406322 /* Broadcom 5222 */ - -#define STR_ID_LXT970 "LXT970" -#define STR_ID_LXT971 "LXT971" -#define STR_ID_82555 "Intel82555" -#define STR_ID_QS6612 "QS6612" -#define STR_ID_AMD79C784 "AMD79C784" -#define STR_ID_LSI80225 "LSI80225" -#define STR_ID_LSI80225B "LSI80225/B" -#define STR_ID_DP83848VV "N83848" -#define STR_ID_DP83849 "N83849" -#define STR_ID_BCM5222 "BCM5222" - -/**************************************************************************** - * mii_init -- Initialize the MII for MII command without ethernet - * This function is a subset of eth_init - **************************************************************************** - */ -void mii_reset(struct fec_info_dma *info) -{ - volatile fecdma_t *fecp = (fecdma_t *) (info->miibase); - int i; - - fecp->ecr = FEC_ECR_RESET; - for (i = 0; (fecp->ecr & FEC_ECR_RESET) && (i < FEC_RESET_DELAY); ++i) { - udelay(1); - } - if (i == FEC_RESET_DELAY) { - printf("FEC_RESET_DELAY timeout\n"); - } -} - -/* send command to phy using mii, wait for result */ -uint mii_send(uint mii_cmd) -{ - struct fec_info_dma *info; - struct eth_device *dev; - volatile fecdma_t *ep; - uint mii_reply; - int j = 0; - - /* retrieve from register structure */ - dev = eth_get_dev(); - info = dev->priv; - - ep = (fecdma_t *) info->miibase; - - ep->mmfr = mii_cmd; /* command to phy */ - - /* wait for mii complete */ - while (!(ep->eir & FEC_EIR_MII) && (j < MCFFEC_TOUT_LOOP)) { - udelay(1); - j++; - } - if (j >= MCFFEC_TOUT_LOOP) { - printf("MII not complete\n"); - return -1; - } - - mii_reply = ep->mmfr; /* result from phy */ - ep->eir = FEC_EIR_MII; /* clear MII complete */ -#ifdef ET_DEBUG - printf("%s[%d] %s: sent=0x%8.8x, reply=0x%8.8x\n", - __FILE__, __LINE__, __FUNCTION__, mii_cmd, mii_reply); -#endif - - return (mii_reply & 0xffff); /* data read from phy */ -} -#endif /* CONFIG_SYS_DISCOVER_PHY || CONFIG_CMD_MII */ - -#if defined(CONFIG_SYS_DISCOVER_PHY) -int mii_discover_phy(struct eth_device *dev) -{ -#define MAX_PHY_PASSES 11 - struct fec_info_dma *info = dev->priv; - int phyaddr, pass, temp; - uint phyno, phytype; - - if (info->phyname_init) { - return info->phy_addr; - } - - phyaddr = -1; /* didn't find a PHY yet */ - for (pass = 1; pass <= MAX_PHY_PASSES && phyaddr < 0; ++pass) { - if (pass > 1) { - /* PHY may need more time to recover from reset. - * The LXT970 needs 50ms typical, no maximum is - * specified, so wait 10ms before try again. - * With 11 passes this gives it 100ms to wake up. - */ - udelay(10000); /* wait 10ms */ - } - - temp = 0; - if (info->index > 0) { - /* Some phy have multiple address, to solve the issue - where phyno keeps starting from 0, check the - previous phy address if both miibase are the same. */ - if (info->miibase == (info->next)->miibase) { - temp = (info->next)->phy_addr + 1; - } - } - - for (phyno = temp; phyno < 32 && phyaddr < 0; ++phyno) { - - phytype = mii_send(mk_mii_read(phyno, PHY_PHYIDR1)); -#ifdef ET_DEBUG - printf("PHY type 0x%x pass %d type\n", phytype, pass); -#endif - if (phytype != 0xffff) { - phyaddr = phyno; - phytype <<= 16; - phytype |= - mii_send(mk_mii_read(phyno, PHY_PHYIDR2)); - - switch (phytype & 0xffffffff) { - case PHY_ID_BCM5222: - strcpy(info->phy_name, STR_ID_BCM5222); - info->phyname_init = 1; - break; - default: - strcpy(info->phy_name, "unknown"); - info->phyname_init = 1; - break; - } - -#ifdef ET_DEBUG - printf("PHY @ 0x%x pass %d type ", phyno, pass); - switch (phytype & 0xffffffff) { - case PHY_ID_BCM5222: - printf(STR_ID_BCM5222); - break; - default: - printf("0x%08x\n", phytype); - break; - } -#endif - } - } - } - if (phyaddr < 0) - printf("No PHY device found.\n"); - - return phyaddr; -} -#endif /* CONFIG_SYS_DISCOVER_PHY */ - -void mii_init(void) __attribute__ ((weak, alias("__mii_init"))); - -void __mii_init(void) -{ - volatile fecdma_t *fecp; - struct fec_info_dma *info; - struct eth_device *dev; - int miispd = 0, i = 0; - u16 autoneg = 0; - - /* retrieve from register structure */ - dev = eth_get_dev(); - info = dev->priv; - - fecp = (fecdma_t *) info->miibase; - - fecpin_setclear(dev, 1); - - mii_reset(info); - - /* We use strictly polling mode only */ - fecp->eimr = 0; - - /* Clear any pending interrupt */ - fecp->eir = 0xffffffff; - - /* Set MII speed */ - miispd = (gd->bus_clk / 1000000) / 5; - fecp->mscr = miispd << 1; - - info->phy_addr = mii_discover_phy(dev); - -#define AUTONEGLINK (PHY_BMSR_AUTN_COMP | PHY_BMSR_LS) - while (i < MCFFEC_TOUT_LOOP) { - autoneg = 0; - miiphy_read(dev->name, info->phy_addr, PHY_BMSR, &autoneg); - i++; - - if ((autoneg & AUTONEGLINK) == AUTONEGLINK) - break; - - udelay(500); - } - if (i >= MCFFEC_TOUT_LOOP) { - printf("Auto Negotiation not complete\n"); - } - - /* adapt to the half/full speed settings */ - info->dup_spd = miiphy_duplex(dev->name, info->phy_addr) << 16; - info->dup_spd |= miiphy_speed(dev->name, info->phy_addr); -} - -/***************************************************************************** - * Read and write a MII PHY register, routines used by MII Utilities - * - * FIXME: These routines are expected to return 0 on success, but mii_send - * does _not_ return an error code. Maybe 0xFFFF means error, i.e. - * no PHY connected... - * For now always return 0. - * FIXME: These routines only work after calling eth_init() at least once! - * Otherwise they hang in mii_send() !!! Sorry! - *****************************************************************************/ - -int mcffec_miiphy_read(char *devname, unsigned char addr, unsigned char reg, - unsigned short *value) -{ - short rdreg; /* register working value */ - -#ifdef MII_DEBUG - printf("miiphy_read(0x%x) @ 0x%x = ", reg, addr); -#endif - rdreg = mii_send(mk_mii_read(addr, reg)); - - *value = rdreg; - -#ifdef MII_DEBUG - printf("0x%04x\n", *value); -#endif - - return 0; -} - -int mcffec_miiphy_write(char *devname, unsigned char addr, unsigned char reg, - unsigned short value) -{ - short rdreg; /* register working value */ - -#ifdef MII_DEBUG - printf("miiphy_write(0x%x) @ 0x%x = ", reg, addr); -#endif - - rdreg = mii_send(mk_mii_write(addr, reg, value)); - -#ifdef MII_DEBUG - printf("0x%04x\n", value); -#endif - - return 0; -} - -#endif /* CONFIG_CMD_NET, FEC_ENET & NET_MULTI */ diff --git a/board/freescale/mpc8536ds/mpc8536ds.c b/board/freescale/mpc8536ds/mpc8536ds.c index 2978b7d77a..6fed4eaf2a 100644 --- a/board/freescale/mpc8536ds/mpc8536ds.c +++ b/board/freescale/mpc8536ds/mpc8536ds.c @@ -439,8 +439,8 @@ int board_early_init_r(void) */ /* Flush d-cache and invalidate i-cache of any FLASH data */ - flush_dcache(); - invalidate_icache(); + flush_dcache(); + invalidate_icache(); /* invalidate existing TLB entry for flash + promjet */ disable_tlb(flash_esel); @@ -646,7 +646,7 @@ int board_eth_init(bd_t *bis) #if defined(CONFIG_OF_BOARD_SETUP) extern void ft_fsl_pci_setup(void *blob, const char *pci_alias, - struct pci_controller *hose); + struct pci_controller *hose); void ft_board_setup(void *blob, bd_t *bd) { diff --git a/board/freescale/mpc8544ds/mpc8544ds.c b/board/freescale/mpc8544ds/mpc8544ds.c index 600d606db3..545d869fcc 100644 --- a/board/freescale/mpc8544ds/mpc8544ds.c +++ b/board/freescale/mpc8544ds/mpc8544ds.c @@ -488,7 +488,7 @@ int board_eth_init(bd_t *bis) #if defined(CONFIG_OF_BOARD_SETUP) extern void ft_fsl_pci_setup(void *blob, const char *pci_alias, - struct pci_controller *hose); + struct pci_controller *hose); void ft_board_setup(void *blob, bd_t *bd) { diff --git a/board/freescale/mpc8548cds/mpc8548cds.c b/board/freescale/mpc8548cds/mpc8548cds.c index 6eb62eab3b..af5ff42e31 100644 --- a/board/freescale/mpc8548cds/mpc8548cds.c +++ b/board/freescale/mpc8548cds/mpc8548cds.c @@ -479,7 +479,7 @@ int last_stage_init(void) #if defined(CONFIG_OF_BOARD_SETUP) extern void ft_fsl_pci_setup(void *blob, const char *pci_alias, - struct pci_controller *hose); + struct pci_controller *hose); void ft_pci_setup(void *blob, bd_t *bd) { diff --git a/board/freescale/mpc8568mds/mpc8568mds.c b/board/freescale/mpc8568mds/mpc8568mds.c index 28e3892e3d..688d8c390f 100644 --- a/board/freescale/mpc8568mds/mpc8568mds.c +++ b/board/freescale/mpc8568mds/mpc8568mds.c @@ -496,7 +496,7 @@ pci_init_board(void) #if defined(CONFIG_OF_BOARD_SETUP) extern void ft_fsl_pci_setup(void *blob, const char *pci_alias, - struct pci_controller *hose); + struct pci_controller *hose); void ft_board_setup(void *blob, bd_t *bd) { diff --git a/board/freescale/mpc8572ds/mpc8572ds.c b/board/freescale/mpc8572ds/mpc8572ds.c index d1528a78e4..3a78c98d14 100644 --- a/board/freescale/mpc8572ds/mpc8572ds.c +++ b/board/freescale/mpc8572ds/mpc8572ds.c @@ -362,8 +362,8 @@ int board_early_init_r(void) */ /* Flush d-cache and invalidate i-cache of any FLASH data */ - flush_dcache(); - invalidate_icache(); + flush_dcache(); + invalidate_icache(); /* invalidate existing TLB entry for flash + promjet */ disable_tlb(flash_esel); @@ -560,7 +560,7 @@ int board_eth_init(bd_t *bis) #if defined(CONFIG_OF_BOARD_SETUP) extern void ft_fsl_pci_setup(void *blob, const char *pci_alias, - struct pci_controller *hose); + struct pci_controller *hose); void ft_board_setup(void *blob, bd_t *bd) { diff --git a/board/freescale/mpc8610hpcd/mpc8610hpcd.c b/board/freescale/mpc8610hpcd/mpc8610hpcd.c index 02dc744065..2792778e32 100644 --- a/board/freescale/mpc8610hpcd/mpc8610hpcd.c +++ b/board/freescale/mpc8610hpcd/mpc8610hpcd.c @@ -403,7 +403,7 @@ void pci_init_board(void) #if defined(CONFIG_OF_BOARD_SETUP) extern void ft_fsl_pci_setup(void *blob, const char *pci_alias, - struct pci_controller *hose); + struct pci_controller *hose); void ft_board_setup(void *blob, bd_t *bd) diff --git a/board/freescale/mpc8641hpcn/ddr.c b/board/freescale/mpc8641hpcn/ddr.c index 517c6ee0e9..3789b5442e 100644 --- a/board/freescale/mpc8641hpcn/ddr.c +++ b/board/freescale/mpc8641hpcn/ddr.c @@ -47,12 +47,12 @@ void fsl_ddr_get_spd(ddr2_spd_eeprom_t *ctrl_dimms_spd, } typedef struct { - u32 datarate_mhz_low; - u32 datarate_mhz_high; - u32 n_ranks; - u32 clk_adjust; - u32 cpo; - u32 write_data_delay; + u32 datarate_mhz_low; + u32 datarate_mhz_high; + u32 n_ranks; + u32 clk_adjust; + u32 cpo; + u32 write_data_delay; } board_specific_parameters_t; /* XXX: these values need to be checked for all interleaving modes. */ @@ -84,7 +84,7 @@ const board_specific_parameters_t board_specific_parameters[2][16] = { { /* memory controller 1 */ - /* lo| hi| num| clk| cpo|wrdata */ + /* lo| hi| num| clk| cpo|wrdata */ /* mhz| mhz|ranks|adjst| | delay */ { 0, 333, 4, 7, 7, 3}, {334, 400, 4, 7, 9, 3}, @@ -129,7 +129,7 @@ void fsl_ddr_board_options(memctl_options_t *popts, if (i&1) { /* odd CS */ popts->cs_local_opts[i].odt_rd_cfg = 0; popts->cs_local_opts[i].odt_wr_cfg = 0; - } else { /* even CS */ + } else { /* even CS */ if ((CONFIG_DIMM_SLOTS_PER_CTLR == 2) && (pdimm[i/2].n_ranks != 0)) { popts->cs_local_opts[i].odt_rd_cfg = 3; diff --git a/board/freescale/mpc8641hpcn/mpc8641hpcn.c b/board/freescale/mpc8641hpcn/mpc8641hpcn.c index d6a0a56292..15be0c6134 100644 --- a/board/freescale/mpc8641hpcn/mpc8641hpcn.c +++ b/board/freescale/mpc8641hpcn/mpc8641hpcn.c @@ -249,7 +249,7 @@ void pci_init_board(void) #if defined(CONFIG_OF_BOARD_SETUP) extern void ft_fsl_pci_setup(void *blob, const char *pci_alias, - struct pci_controller *hose); + struct pci_controller *hose); void ft_board_setup(void *blob, bd_t *bd) diff --git a/board/idmr/Makefile b/board/idmr/Makefile index be704b76f0..cf07cf40fd 100644 --- a/board/idmr/Makefile +++ b/board/idmr/Makefile @@ -25,7 +25,7 @@ include $(TOPDIR)/config.mk LIB = $(obj)lib$(BOARD).a -COBJS = $(BOARD).o flash.o mii.o +COBJS = $(BOARD).o flash.o SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) OBJS := $(addprefix $(obj),$(COBJS)) diff --git a/board/idmr/mii.c b/board/idmr/mii.c deleted file mode 100644 index e79fa19584..0000000000 --- a/board/idmr/mii.c +++ /dev/null @@ -1,303 +0,0 @@ -/* - * Copyright (C) 2004-2007 Freescale Semiconductor, Inc. - * TsiChung Liew (Tsi-Chung.Liew@freescale.com) - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include <common.h> -#include <asm/fec.h> -#include <asm/immap.h> - -#include <config.h> -#include <net.h> - -DECLARE_GLOBAL_DATA_PTR; - -#if defined(CONFIG_CMD_NET) && defined(CONFIG_NET_MULTI) -#undef MII_DEBUG -#undef ET_DEBUG - -int fecpin_setclear(struct eth_device *dev, int setclear) -{ - if (setclear) { - /* Enable Ethernet pins */ - mbar_writeByte(MCF_GPIO_PAR_FECI2C, CONFIG_SYS_FECI2C); - } else { - } - - return 0; -} - -#if defined(CONFIG_SYS_DISCOVER_PHY) || defined(CONFIG_CMD_MII) -#include <miiphy.h> - -/* Make MII read/write commands for the FEC. */ -#define mk_mii_read(ADDR, REG) (0x60020000 | ((ADDR << 23) | (REG & 0x1f) << 18)) - -#define mk_mii_write(ADDR, REG, VAL) (0x50020000 | ((ADDR << 23) | (REG & 0x1f) << 18) | (VAL & 0xffff)) - -/* PHY identification */ -#define PHY_ID_LXT970 0x78100000 /* LXT970 */ -#define PHY_ID_LXT971 0x001378e0 /* LXT971 and 972 */ -#define PHY_ID_82555 0x02a80150 /* Intel 82555 */ -#define PHY_ID_QS6612 0x01814400 /* QS6612 */ -#define PHY_ID_AMD79C784 0x00225610 /* AMD 79C784 */ -#define PHY_ID_LSI80225 0x0016f870 /* LSI 80225 */ -#define PHY_ID_LSI80225B 0x0016f880 /* LSI 80225/B */ -#define PHY_ID_DP83848VV 0x20005C90 /* National 83848 */ -#define PHY_ID_DP83849 0x20005CA2 /* National 82849 */ -#define PHY_ID_KS8721BL 0x00221619 /* Micrel KS8721BL/SL */ - -#define STR_ID_LXT970 "LXT970" -#define STR_ID_LXT971 "LXT971" -#define STR_ID_82555 "Intel82555" -#define STR_ID_QS6612 "QS6612" -#define STR_ID_AMD79C784 "AMD79C784" -#define STR_ID_LSI80225 "LSI80225" -#define STR_ID_LSI80225B "LSI80225/B" -#define STR_ID_DP83848VV "N83848" -#define STR_ID_DP83849 "N83849" -#define STR_ID_KS8721BL "KS8721BL" - -/**************************************************************************** - * mii_init -- Initialize the MII for MII command without ethernet - * This function is a subset of eth_init - **************************************************************************** - */ -void mii_reset(struct fec_info_s *info) -{ - volatile fec_t *fecp = (fec_t *) (info->miibase); - int i; - - fecp->ecr = FEC_ECR_RESET; - for (i = 0; (fecp->ecr & FEC_ECR_RESET) && (i < FEC_RESET_DELAY); ++i) { - udelay(1); - } - if (i == FEC_RESET_DELAY) { - printf("FEC_RESET_DELAY timeout\n"); - } -} - -/* send command to phy using mii, wait for result */ -uint mii_send(uint mii_cmd) -{ - struct fec_info_s *info; - struct eth_device *dev; - volatile fec_t *ep; - uint mii_reply; - int j = 0; - - /* retrieve from register structure */ - dev = eth_get_dev(); - info = dev->priv; - - ep = (fec_t *) info->miibase; - - ep->mmfr = mii_cmd; /* command to phy */ - - /* wait for mii complete */ - while (!(ep->eir & FEC_EIR_MII) && (j < MCFFEC_TOUT_LOOP)) { - udelay(1); - j++; - } - if (j >= MCFFEC_TOUT_LOOP) { - printf("MII not complete\n"); - return -1; - } - - mii_reply = ep->mmfr; /* result from phy */ - ep->eir = FEC_EIR_MII; /* clear MII complete */ -#ifdef ET_DEBUG - printf("%s[%d] %s: sent=0x%8.8x, reply=0x%8.8x\n", - __FILE__, __LINE__, __FUNCTION__, mii_cmd, mii_reply); -#endif - - return (mii_reply & 0xffff); /* data read from phy */ -} -#endif /* CONFIG_SYS_DISCOVER_PHY || CONFIG_CMD_MII */ - -#if defined(CONFIG_SYS_DISCOVER_PHY) -int mii_discover_phy(struct eth_device *dev) -{ -#define MAX_PHY_PASSES 11 - struct fec_info_s *info = dev->priv; - int phyaddr, pass; - uint phyno, phytype; - - if (info->phyname_init) - return info->phy_addr; - - phyaddr = -1; /* didn't find a PHY yet */ - for (pass = 1; pass <= MAX_PHY_PASSES && phyaddr < 0; ++pass) { - if (pass > 1) { - /* PHY may need more time to recover from reset. - * The LXT970 needs 50ms typical, no maximum is - * specified, so wait 10ms before try again. - * With 11 passes this gives it 100ms to wake up. - */ - udelay(10000); /* wait 10ms */ - } - - for (phyno = 0; phyno < 32 && phyaddr < 0; ++phyno) { - - phytype = mii_send(mk_mii_read(phyno, PHY_PHYIDR1)); -#ifdef ET_DEBUG - printf("PHY type 0x%x pass %d type\n", phytype, pass); -#endif - if (phytype != 0xffff) { - phyaddr = phyno; - phytype <<= 16; - phytype |= - mii_send(mk_mii_read(phyno, PHY_PHYIDR2)); - - switch (phytype & 0xffffffff) { - case PHY_ID_KS8721BL: - strcpy(info->phy_name, - STR_ID_KS8721BL); - info->phyname_init = 1; - break; - default: - strcpy(info->phy_name, "unknown"); - info->phyname_init = 1; - break; - } - -#ifdef ET_DEBUG - printf("PHY @ 0x%x pass %d type ", phyno, pass); - switch (phytype & 0xffffffff) { - case PHY_ID_KS8721BL: - printf(STR_ID_KS8721BL); - break; - default: - printf("0x%08x\n", phytype); - break; - } -#endif - } - } - } - if (phyaddr < 0) - printf("No PHY device found.\n"); - - return phyaddr; -} -#endif /* CONFIG_SYS_DISCOVER_PHY */ - -void mii_init(void) __attribute__((weak,alias("__mii_init"))); - -void __mii_init(void) -{ - volatile fec_t *fecp; - struct fec_info_s *info; - struct eth_device *dev; - int miispd = 0, i = 0; - u16 autoneg = 0; - - /* retrieve from register structure */ - dev = eth_get_dev(); - info = dev->priv; - - fecp = (fec_t *) info->miibase; - - fecpin_setclear(dev, 1); - - mii_reset(info); - - /* We use strictly polling mode only */ - fecp->eimr = 0; - - /* Clear any pending interrupt */ - fecp->eir = 0xffffffff; - - /* Set MII speed */ - miispd = (gd->bus_clk / 1000000) / 5; - fecp->mscr = miispd << 1; - - info->phy_addr = mii_discover_phy(dev); - -#define AUTONEGLINK (PHY_BMSR_AUTN_COMP | PHY_BMSR_LS) - while (i < MCFFEC_TOUT_LOOP) { - autoneg = 0; - miiphy_read(dev->name, info->phy_addr, PHY_BMSR, &autoneg); - i++; - - if ((autoneg & AUTONEGLINK) == AUTONEGLINK) - break; - - udelay(500); - } - if (i >= MCFFEC_TOUT_LOOP) { - printf("Auto Negotiation not complete\n"); - } - - /* adapt to the half/full speed settings */ - info->dup_spd = miiphy_duplex(dev->name, info->phy_addr) << 16; - info->dup_spd |= miiphy_speed(dev->name, info->phy_addr); -} - -/***************************************************************************** - * Read and write a MII PHY register, routines used by MII Utilities - * - * FIXME: These routines are expected to return 0 on success, but mii_send - * does _not_ return an error code. Maybe 0xFFFF means error, i.e. - * no PHY connected... - * For now always return 0. - * FIXME: These routines only work after calling eth_init() at least once! - * Otherwise they hang in mii_send() !!! Sorry! - *****************************************************************************/ - -int mcffec_miiphy_read(char *devname, unsigned char addr, unsigned char reg, - unsigned short *value) -{ - short rdreg; /* register working value */ - -#ifdef MII_DEBUG - printf("miiphy_read(0x%x) @ 0x%x = ", reg, addr); -#endif - rdreg = mii_send(mk_mii_read(addr, reg)); - - *value = rdreg; - -#ifdef MII_DEBUG - printf("0x%04x\n", *value); -#endif - - return 0; -} - -int mcffec_miiphy_write(char *devname, unsigned char addr, unsigned char reg, - unsigned short value) -{ - short rdreg; /* register working value */ - -#ifdef MII_DEBUG - printf("miiphy_write(0x%x) @ 0x%x = ", reg, addr); -#endif - - rdreg = mii_send(mk_mii_write(addr, reg, value)); - -#ifdef MII_DEBUG - printf("0x%04x\n", value); -#endif - - return 0; -} - -#endif /* CONFIG_CMD_NET, FEC_ENET & NET_MULTI */ diff --git a/board/keymile/mgcoge/mgcoge.c b/board/keymile/mgcoge/mgcoge.c index 6dda92062b..3683417f5c 100644 --- a/board/keymile/mgcoge/mgcoge.c +++ b/board/keymile/mgcoge/mgcoge.c @@ -45,152 +45,152 @@ extern int ivm_read_eeprom (void); const iop_conf_t iop_conf_tab[4][32] = { /* Port A */ - { /* conf ppar psor pdir podr pdat */ - /* PA31 */ { 0, 0, 0, 0, 0, 0 }, /* PA31 */ - /* PA30 */ { 0, 0, 0, 0, 0, 0 }, /* PA30 */ - /* PA29 */ { 0, 0, 0, 0, 0, 0 }, /* PA29 */ - /* PA28 */ { 0, 0, 0, 0, 0, 0 }, /* PA28 */ - /* PA27 */ { 0, 0, 0, 0, 0, 0 }, /* PA27 */ - /* PA26 */ { 0, 0, 0, 0, 0, 0 }, /* PA26 */ - /* PA25 */ { 0, 0, 0, 0, 0, 0 }, /* PA25 */ - /* PA24 */ { 0, 0, 0, 0, 0, 0 }, /* PA24 */ - /* PA23 */ { 0, 0, 0, 0, 0, 0 }, /* PA23 */ - /* PA22 */ { 0, 0, 0, 0, 0, 0 }, /* PA22 */ - /* PA21 */ { 0, 0, 0, 0, 0, 0 }, /* PA21 */ - /* PA20 */ { 0, 0, 0, 0, 0, 0 }, /* PA20 */ - /* PA19 */ { 0, 0, 0, 0, 0, 0 }, /* PA19 */ - /* PA18 */ { 0, 0, 0, 0, 0, 0 }, /* PA18 */ - /* PA17 */ { 0, 0, 0, 0, 0, 0 }, /* PA17 */ - /* PA16 */ { 0, 0, 0, 0, 0, 0 }, /* PA16 */ - /* PA15 */ { 0, 0, 0, 0, 0, 0 }, /* PA15 */ - /* PA14 */ { 0, 0, 0, 0, 0, 0 }, /* PA14 */ - /* PA13 */ { 0, 0, 0, 0, 0, 0 }, /* PA13 */ - /* PA12 */ { 0, 0, 0, 0, 0, 0 }, /* PA12 */ - /* PA11 */ { 0, 0, 0, 0, 0, 0 }, /* PA11 */ - /* PA10 */ { 0, 0, 0, 0, 0, 0 }, /* PA10 */ - /* PA9 */ { 1, 1, 0, 1, 0, 0 }, /* SMC2 TxD */ - /* PA8 */ { 1, 1, 0, 0, 0, 0 }, /* SMC2 RxD */ - /* PA7 */ { 0, 0, 0, 0, 0, 0 }, /* PA7 */ - /* PA6 */ { 0, 0, 0, 0, 0, 0 }, /* PA6 */ - /* PA5 */ { 0, 0, 0, 0, 0, 0 }, /* PA5 */ - /* PA4 */ { 0, 0, 0, 0, 0, 0 }, /* PA4 */ - /* PA3 */ { 0, 0, 0, 0, 0, 0 }, /* PA3 */ - /* PA2 */ { 0, 0, 0, 0, 0, 0 }, /* PA2 */ - /* PA1 */ { 0, 0, 0, 0, 0, 0 }, /* PA1 */ - /* PA0 */ { 0, 0, 0, 0, 0, 0 } /* PA0 */ + { /* conf ppar psor pdir podr pdat */ + /* PA31 */ { 0, 0, 0, 0, 0, 0 }, /* PA31 */ + /* PA30 */ { 0, 0, 0, 0, 0, 0 }, /* PA30 */ + /* PA29 */ { 0, 0, 0, 0, 0, 0 }, /* PA29 */ + /* PA28 */ { 0, 0, 0, 0, 0, 0 }, /* PA28 */ + /* PA27 */ { 0, 0, 0, 0, 0, 0 }, /* PA27 */ + /* PA26 */ { 0, 0, 0, 0, 0, 0 }, /* PA26 */ + /* PA25 */ { 0, 0, 0, 0, 0, 0 }, /* PA25 */ + /* PA24 */ { 0, 0, 0, 0, 0, 0 }, /* PA24 */ + /* PA23 */ { 0, 0, 0, 0, 0, 0 }, /* PA23 */ + /* PA22 */ { 0, 0, 0, 0, 0, 0 }, /* PA22 */ + /* PA21 */ { 0, 0, 0, 0, 0, 0 }, /* PA21 */ + /* PA20 */ { 0, 0, 0, 0, 0, 0 }, /* PA20 */ + /* PA19 */ { 0, 0, 0, 0, 0, 0 }, /* PA19 */ + /* PA18 */ { 0, 0, 0, 0, 0, 0 }, /* PA18 */ + /* PA17 */ { 0, 0, 0, 0, 0, 0 }, /* PA17 */ + /* PA16 */ { 0, 0, 0, 0, 0, 0 }, /* PA16 */ + /* PA15 */ { 0, 0, 0, 0, 0, 0 }, /* PA15 */ + /* PA14 */ { 0, 0, 0, 0, 0, 0 }, /* PA14 */ + /* PA13 */ { 0, 0, 0, 0, 0, 0 }, /* PA13 */ + /* PA12 */ { 0, 0, 0, 0, 0, 0 }, /* PA12 */ + /* PA11 */ { 0, 0, 0, 0, 0, 0 }, /* PA11 */ + /* PA10 */ { 0, 0, 0, 0, 0, 0 }, /* PA10 */ + /* PA9 */ { 1, 1, 0, 1, 0, 0 }, /* SMC2 TxD */ + /* PA8 */ { 1, 1, 0, 0, 0, 0 }, /* SMC2 RxD */ + /* PA7 */ { 0, 0, 0, 0, 0, 0 }, /* PA7 */ + /* PA6 */ { 0, 0, 0, 0, 0, 0 }, /* PA6 */ + /* PA5 */ { 0, 0, 0, 0, 0, 0 }, /* PA5 */ + /* PA4 */ { 0, 0, 0, 0, 0, 0 }, /* PA4 */ + /* PA3 */ { 0, 0, 0, 0, 0, 0 }, /* PA3 */ + /* PA2 */ { 0, 0, 0, 0, 0, 0 }, /* PA2 */ + /* PA1 */ { 0, 0, 0, 0, 0, 0 }, /* PA1 */ + /* PA0 */ { 0, 0, 0, 0, 0, 0 } /* PA0 */ }, /* Port B */ - { /* conf ppar psor pdir podr pdat */ - /* PB31 */ { 0, 0, 0, 0, 0, 0 }, /* PB31 */ - /* PB30 */ { 0, 0, 0, 0, 0, 0 }, /* PB30 */ - /* PB29 */ { 0, 0, 0, 0, 0, 0 }, /* PB29 */ - /* PB28 */ { 0, 0, 0, 0, 0, 0 }, /* PB28 */ - /* PB27 */ { 0, 0, 0, 0, 0, 0 }, /* PB27 */ - /* PB26 */ { 0, 0, 0, 0, 0, 0 }, /* PB26 */ - /* PB25 */ { 0, 0, 0, 0, 0, 0 }, /* PB25 */ - /* PB24 */ { 0, 0, 0, 0, 0, 0 }, /* PB24 */ - /* PB23 */ { 0, 0, 0, 0, 0, 0 }, /* PB23 */ - /* PB22 */ { 0, 0, 0, 0, 0, 0 }, /* PB22 */ - /* PB21 */ { 0, 0, 0, 0, 0, 0 }, /* PB21 */ - /* PB20 */ { 0, 0, 0, 0, 0, 0 }, /* PB20 */ - /* PB19 */ { 0, 0, 0, 0, 0, 0 }, /* PB19 */ - /* PB18 */ { 0, 0, 0, 0, 0, 0 }, /* PB18 */ - /* PB17 */ { 0, 0, 0, 0, 0, 0 }, /* non-existent */ - /* PB16 */ { 0, 0, 0, 0, 0, 0 }, /* non-existent */ - /* PB15 */ { 0, 0, 0, 0, 0, 0 }, /* non-existent */ - /* PB14 */ { 0, 0, 0, 0, 0, 0 }, /* non-existent */ - /* PB13 */ { 0, 0, 0, 0, 0, 0 }, /* non-existent */ - /* PB12 */ { 0, 0, 0, 0, 0, 0 }, /* non-existent */ - /* PB11 */ { 0, 0, 0, 0, 0, 0 }, /* non-existent */ - /* PB10 */ { 0, 0, 0, 0, 0, 0 }, /* non-existent */ - /* PB9 */ { 0, 0, 0, 0, 0, 0 }, /* non-existent */ - /* PB8 */ { 0, 0, 0, 0, 0, 0 }, /* non-existent */ - /* PB7 */ { 0, 0, 0, 0, 0, 0 }, /* non-existent */ - /* PB6 */ { 0, 0, 0, 0, 0, 0 }, /* non-existent */ - /* PB5 */ { 0, 0, 0, 0, 0, 0 }, /* non-existent */ - /* PB4 */ { 0, 0, 0, 0, 0, 0 }, /* non-existent */ - /* PB3 */ { 0, 0, 0, 0, 0, 0 }, /* non-existent */ - /* PB2 */ { 0, 0, 0, 0, 0, 0 }, /* non-existent */ - /* PB1 */ { 0, 0, 0, 0, 0, 0 }, /* non-existent */ - /* PB0 */ { 0, 0, 0, 0, 0, 0 } /* non-existent */ + { /* conf ppar psor pdir podr pdat */ + /* PB31 */ { 0, 0, 0, 0, 0, 0 }, /* PB31 */ + /* PB30 */ { 0, 0, 0, 0, 0, 0 }, /* PB30 */ + /* PB29 */ { 0, 0, 0, 0, 0, 0 }, /* PB29 */ + /* PB28 */ { 0, 0, 0, 0, 0, 0 }, /* PB28 */ + /* PB27 */ { 0, 0, 0, 0, 0, 0 }, /* PB27 */ + /* PB26 */ { 0, 0, 0, 0, 0, 0 }, /* PB26 */ + /* PB25 */ { 0, 0, 0, 0, 0, 0 }, /* PB25 */ + /* PB24 */ { 0, 0, 0, 0, 0, 0 }, /* PB24 */ + /* PB23 */ { 0, 0, 0, 0, 0, 0 }, /* PB23 */ + /* PB22 */ { 0, 0, 0, 0, 0, 0 }, /* PB22 */ + /* PB21 */ { 0, 0, 0, 0, 0, 0 }, /* PB21 */ + /* PB20 */ { 0, 0, 0, 0, 0, 0 }, /* PB20 */ + /* PB19 */ { 0, 0, 0, 0, 0, 0 }, /* PB19 */ + /* PB18 */ { 0, 0, 0, 0, 0, 0 }, /* PB18 */ + /* PB17 */ { 0, 0, 0, 0, 0, 0 }, /* non-existent */ + /* PB16 */ { 0, 0, 0, 0, 0, 0 }, /* non-existent */ + /* PB15 */ { 0, 0, 0, 0, 0, 0 }, /* non-existent */ + /* PB14 */ { 0, 0, 0, 0, 0, 0 }, /* non-existent */ + /* PB13 */ { 0, 0, 0, 0, 0, 0 }, /* non-existent */ + /* PB12 */ { 0, 0, 0, 0, 0, 0 }, /* non-existent */ + /* PB11 */ { 0, 0, 0, 0, 0, 0 }, /* non-existent */ + /* PB10 */ { 0, 0, 0, 0, 0, 0 }, /* non-existent */ + /* PB9 */ { 0, 0, 0, 0, 0, 0 }, /* non-existent */ + /* PB8 */ { 0, 0, 0, 0, 0, 0 }, /* non-existent */ + /* PB7 */ { 0, 0, 0, 0, 0, 0 }, /* non-existent */ + /* PB6 */ { 0, 0, 0, 0, 0, 0 }, /* non-existent */ + /* PB5 */ { 0, 0, 0, 0, 0, 0 }, /* non-existent */ + /* PB4 */ { 0, 0, 0, 0, 0, 0 }, /* non-existent */ + /* PB3 */ { 0, 0, 0, 0, 0, 0 }, /* non-existent */ + /* PB2 */ { 0, 0, 0, 0, 0, 0 }, /* non-existent */ + /* PB1 */ { 0, 0, 0, 0, 0, 0 }, /* non-existent */ + /* PB0 */ { 0, 0, 0, 0, 0, 0 } /* non-existent */ }, /* Port C */ - { /* conf ppar psor pdir podr pdat */ - /* PC31 */ { 0, 0, 0, 0, 0, 0 }, /* PC31 */ - /* PC30 */ { 0, 0, 0, 0, 0, 0 }, /* PC30 */ - /* PC29 */ { 0, 0, 0, 0, 0, 0 }, /* PC29 */ - /* PC28 */ { 0, 0, 0, 0, 0, 0 }, /* PC28 */ - /* PC27 */ { 0, 0, 0, 0, 0, 0 }, /* PC27 */ - /* PC26 */ { 0, 0, 0, 0, 0, 0 }, /* PC26 */ - /* PC25 */ { 1, 1, 0, 0, 0, 0 }, /* SCC4 RxClk */ - /* PC24 */ { 1, 1, 0, 0, 0, 0 }, /* SCC4 TxClk */ - /* PC23 */ { 0, 0, 0, 0, 0, 0 }, /* PC23 */ - /* PC22 */ { 0, 0, 0, 0, 0, 0 }, /* PC22 */ - /* PC21 */ { 0, 0, 0, 0, 0, 0 }, /* PC21 */ - /* PC20 */ { 0, 0, 0, 0, 0, 0 }, /* PC20 */ - /* PC19 */ { 0, 0, 0, 0, 0, 0 }, /* PC19 */ - /* PC18 */ { 0, 0, 0, 0, 0, 0 }, /* PC18 */ - /* PC17 */ { 0, 0, 0, 0, 0, 0 }, /* PC17 */ - /* PC16 */ { 0, 0, 0, 0, 0, 0 }, /* PC16 */ - /* PC15 */ { 0, 0, 0, 0, 0, 0 }, /* PC15 */ - /* PC14 */ { 0, 0, 0, 0, 0, 0 }, /* PC14 */ - /* PC13 */ { 0, 0, 0, 0, 0, 0 }, /* PC13 */ - /* PC12 */ { 0, 0, 0, 0, 0, 0 }, /* PC12 */ - /* PC11 */ { 0, 0, 0, 0, 0, 0 }, /* PC11 */ - /* PC10 */ { 0, 0, 0, 0, 0, 0 }, /* PC10 */ - /* PC9 */ { 1, 1, 0, 0, 0, 0 }, /* SCC4: CTS */ - /* PC8 */ { 1, 1, 0, 0, 0, 0 }, /* SCC4: CD */ - /* PC7 */ { 0, 0, 0, 0, 0, 0 }, /* PC7 */ - /* PC6 */ { 0, 0, 0, 0, 0, 0 }, /* PC6 */ - /* PC5 */ { 0, 0, 0, 0, 0, 0 }, /* PC5 */ - /* PC4 */ { 0, 0, 0, 0, 0, 0 }, /* PC4 */ - /* PC3 */ { 0, 0, 0, 0, 0, 0 }, /* PC3 */ - /* PC2 */ { 0, 0, 0, 0, 0, 0 }, /* PC2 */ - /* PC1 */ { 0, 0, 0, 0, 0, 0 }, /* PC1 */ - /* PC0 */ { 0, 0, 0, 0, 0, 0 }, /* PC0 */ + { /* conf ppar psor pdir podr pdat */ + /* PC31 */ { 0, 0, 0, 0, 0, 0 }, /* PC31 */ + /* PC30 */ { 0, 0, 0, 0, 0, 0 }, /* PC30 */ + /* PC29 */ { 0, 0, 0, 0, 0, 0 }, /* PC29 */ + /* PC28 */ { 0, 0, 0, 0, 0, 0 }, /* PC28 */ + /* PC27 */ { 0, 0, 0, 0, 0, 0 }, /* PC27 */ + /* PC26 */ { 0, 0, 0, 0, 0, 0 }, /* PC26 */ + /* PC25 */ { 1, 1, 0, 0, 0, 0 }, /* SCC4 RxClk */ + /* PC24 */ { 1, 1, 0, 0, 0, 0 }, /* SCC4 TxClk */ + /* PC23 */ { 0, 0, 0, 0, 0, 0 }, /* PC23 */ + /* PC22 */ { 0, 0, 0, 0, 0, 0 }, /* PC22 */ + /* PC21 */ { 0, 0, 0, 0, 0, 0 }, /* PC21 */ + /* PC20 */ { 0, 0, 0, 0, 0, 0 }, /* PC20 */ + /* PC19 */ { 0, 0, 0, 0, 0, 0 }, /* PC19 */ + /* PC18 */ { 0, 0, 0, 0, 0, 0 }, /* PC18 */ + /* PC17 */ { 0, 0, 0, 0, 0, 0 }, /* PC17 */ + /* PC16 */ { 0, 0, 0, 0, 0, 0 }, /* PC16 */ + /* PC15 */ { 0, 0, 0, 0, 0, 0 }, /* PC15 */ + /* PC14 */ { 0, 0, 0, 0, 0, 0 }, /* PC14 */ + /* PC13 */ { 0, 0, 0, 0, 0, 0 }, /* PC13 */ + /* PC12 */ { 0, 0, 0, 0, 0, 0 }, /* PC12 */ + /* PC11 */ { 0, 0, 0, 0, 0, 0 }, /* PC11 */ + /* PC10 */ { 0, 0, 0, 0, 0, 0 }, /* PC10 */ + /* PC9 */ { 1, 1, 0, 0, 0, 0 }, /* SCC4: CTS */ + /* PC8 */ { 1, 1, 0, 0, 0, 0 }, /* SCC4: CD */ + /* PC7 */ { 0, 0, 0, 0, 0, 0 }, /* PC7 */ + /* PC6 */ { 0, 0, 0, 0, 0, 0 }, /* PC6 */ + /* PC5 */ { 0, 0, 0, 0, 0, 0 }, /* PC5 */ + /* PC4 */ { 0, 0, 0, 0, 0, 0 }, /* PC4 */ + /* PC3 */ { 0, 0, 0, 0, 0, 0 }, /* PC3 */ + /* PC2 */ { 0, 0, 0, 0, 0, 0 }, /* PC2 */ + /* PC1 */ { 0, 0, 0, 0, 0, 0 }, /* PC1 */ + /* PC0 */ { 0, 0, 0, 0, 0, 0 }, /* PC0 */ }, /* Port D */ - { /* conf ppar psor pdir podr pdat */ - /* PD31 */ { 0, 0, 0, 0, 0, 0 }, /* PD31 */ - /* PD30 */ { 0, 0, 0, 0, 0, 0 }, /* PD30 */ - /* PD29 */ { 0, 0, 0, 0, 0, 0 }, /* PD29 */ - /* PD28 */ { 0, 0, 0, 0, 0, 0 }, /* PD28 */ - /* PD27 */ { 0, 0, 0, 0, 0, 0 }, /* PD27 */ - /* PD26 */ { 0, 0, 0, 0, 0, 0 }, /* PD26 */ - /* PD25 */ { 0, 0, 0, 0, 0, 0 }, /* PD25 */ - /* PD24 */ { 0, 0, 0, 0, 0, 0 }, /* PD24 */ - /* PD23 */ { 0, 0, 0, 0, 0, 0 }, /* PD23 */ - /* PD22 */ { 1, 1, 0, 0, 0, 0 }, /* SCC4: RXD */ - /* PD21 */ { 1, 1, 0, 1, 0, 0 }, /* SCC4: TXD */ - /* PD20 */ { 1, 1, 0, 1, 0, 0 }, /* SCC4: RTS */ - /* PD19 */ { 0, 0, 0, 0, 0, 0 }, /* PD19 */ - /* PD18 */ { 0, 0, 0, 0, 0, 0 }, /* PD18 */ - /* PD17 */ { 0, 0, 0, 0, 0, 0 }, /* PD17 */ - /* PD16 */ { 0, 0, 0, 0, 0, 0 }, /* PD16 */ + { /* conf ppar psor pdir podr pdat */ + /* PD31 */ { 0, 0, 0, 0, 0, 0 }, /* PD31 */ + /* PD30 */ { 0, 0, 0, 0, 0, 0 }, /* PD30 */ + /* PD29 */ { 0, 0, 0, 0, 0, 0 }, /* PD29 */ + /* PD28 */ { 0, 0, 0, 0, 0, 0 }, /* PD28 */ + /* PD27 */ { 0, 0, 0, 0, 0, 0 }, /* PD27 */ + /* PD26 */ { 0, 0, 0, 0, 0, 0 }, /* PD26 */ + /* PD25 */ { 0, 0, 0, 0, 0, 0 }, /* PD25 */ + /* PD24 */ { 0, 0, 0, 0, 0, 0 }, /* PD24 */ + /* PD23 */ { 0, 0, 0, 0, 0, 0 }, /* PD23 */ + /* PD22 */ { 1, 1, 0, 0, 0, 0 }, /* SCC4: RXD */ + /* PD21 */ { 1, 1, 0, 1, 0, 0 }, /* SCC4: TXD */ + /* PD20 */ { 1, 1, 0, 1, 0, 0 }, /* SCC4: RTS */ + /* PD19 */ { 0, 0, 0, 0, 0, 0 }, /* PD19 */ + /* PD18 */ { 0, 0, 0, 0, 0, 0 }, /* PD18 */ + /* PD17 */ { 0, 0, 0, 0, 0, 0 }, /* PD17 */ + /* PD16 */ { 0, 0, 0, 0, 0, 0 }, /* PD16 */ #if defined(CONFIG_HARD_I2C) - /* PD15 */ { 1, 1, 1, 0, 1, 0 }, /* I2C SDA */ - /* PD14 */ { 1, 1, 1, 0, 1, 0 }, /* I2C SCL */ + /* PD15 */ { 1, 1, 1, 0, 1, 0 }, /* I2C SDA */ + /* PD14 */ { 1, 1, 1, 0, 1, 0 }, /* I2C SCL */ #else - /* PD15 */ { 1, 0, 0, 0, 1, 1 }, /* PD15 */ - /* PD14 */ { 1, 0, 0, 1, 1, 1 }, /* PD14 */ + /* PD15 */ { 1, 0, 0, 0, 1, 1 }, /* PD15 */ + /* PD14 */ { 1, 0, 0, 1, 1, 1 }, /* PD14 */ #endif - /* PD13 */ { 0, 0, 0, 0, 0, 0 }, /* PD13 */ - /* PD12 */ { 0, 0, 0, 0, 0, 0 }, /* PD12 */ - /* PD11 */ { 0, 0, 0, 0, 0, 0 }, /* PD11 */ - /* PD10 */ { 0, 0, 0, 0, 0, 0 }, /* PD10 */ - /* PD9 */ { 0, 0, 0, 0, 0, 0 }, /* PD9 */ - /* PD8 */ { 0, 0, 0, 0, 0, 0 }, /* PD8 */ - /* PD7 */ { 0, 0, 0, 0, 0, 0 }, /* PD7 */ - /* PD6 */ { 0, 0, 0, 0, 0, 0 }, /* PD6 */ - /* PD5 */ { 0, 0, 0, 0, 0, 0 }, /* PD5 */ - /* PD4 */ { 0, 0, 0, 0, 0, 0 }, /* PD4 */ - /* PD3 */ { 0, 0, 0, 0, 0, 0 }, /* non-existent */ - /* PD2 */ { 0, 0, 0, 0, 0, 0 }, /* non-existent */ - /* PD1 */ { 0, 0, 0, 0, 0, 0 }, /* non-existent */ - /* PD0 */ { 0, 0, 0, 0, 0, 0 } /* non-existent */ + /* PD13 */ { 0, 0, 0, 0, 0, 0 }, /* PD13 */ + /* PD12 */ { 0, 0, 0, 0, 0, 0 }, /* PD12 */ + /* PD11 */ { 0, 0, 0, 0, 0, 0 }, /* PD11 */ + /* PD10 */ { 0, 0, 0, 0, 0, 0 }, /* PD10 */ + /* PD9 */ { 0, 0, 0, 0, 0, 0 }, /* PD9 */ + /* PD8 */ { 0, 0, 0, 0, 0, 0 }, /* PD8 */ + /* PD7 */ { 0, 0, 0, 0, 0, 0 }, /* PD7 */ + /* PD6 */ { 0, 0, 0, 0, 0, 0 }, /* PD6 */ + /* PD5 */ { 0, 0, 0, 0, 0, 0 }, /* PD5 */ + /* PD4 */ { 0, 0, 0, 0, 0, 0 }, /* PD4 */ + /* PD3 */ { 0, 0, 0, 0, 0, 0 }, /* non-existent */ + /* PD2 */ { 0, 0, 0, 0, 0, 0 }, /* non-existent */ + /* PD1 */ { 0, 0, 0, 0, 0, 0 }, /* non-existent */ + /* PD0 */ { 0, 0, 0, 0, 0, 0 } /* non-existent */ } }; @@ -309,10 +309,10 @@ int hush_init_var (void) #if defined(CONFIG_OF_BOARD_SETUP) && defined(CONFIG_OF_LIBFDT) extern int fdt_set_node_and_value (void *blob, - char *nodename, - char *regname, - void *var, - int size); + char *nodename, + char *regname, + void *var, + int size); /* * update "memory" property in the blob diff --git a/board/keymile/mgsuvd/mgsuvd.c b/board/keymile/mgsuvd/mgsuvd.c index 0fd28da8d7..3726acf4a1 100644 --- a/board/keymile/mgsuvd/mgsuvd.c +++ b/board/keymile/mgsuvd/mgsuvd.c @@ -151,10 +151,10 @@ int hush_init_var (void) #if defined(CONFIG_OF_BOARD_SETUP) && defined(CONFIG_OF_LIBFDT) extern int fdt_set_node_and_value (void *blob, - char *nodename, - char *regname, - void *var, - int size); + char *nodename, + char *regname, + void *var, + int size); /* * update "memory" property in the blob diff --git a/board/sbc8548/sbc8548.c b/board/sbc8548/sbc8548.c index e27c92dd71..9548ac637d 100644 --- a/board/sbc8548/sbc8548.c +++ b/board/sbc8548/sbc8548.c @@ -530,7 +530,7 @@ int last_stage_init(void) #if defined(CONFIG_OF_BOARD_SETUP) extern void ft_fsl_pci_setup(void *blob, const char *pci_alias, - struct pci_controller *hose); + struct pci_controller *hose); void ft_board_setup(void *blob, bd_t *bd) { diff --git a/board/sbc8641d/sbc8641d.c b/board/sbc8641d/sbc8641d.c index e33dbee9d8..1471e581e3 100644 --- a/board/sbc8641d/sbc8641d.c +++ b/board/sbc8641d/sbc8641d.c @@ -322,7 +322,7 @@ void pci_init_board(void) #if defined(CONFIG_OF_BOARD_SETUP) extern void ft_fsl_pci_setup(void *blob, const char *pci_alias, - struct pci_controller *hose); + struct pci_controller *hose); void ft_board_setup (void *blob, bd_t *bd) { diff --git a/board/tqc/tqm8260/Makefile b/board/tqc/tqm8260/Makefile index 61221fdca2..94ba1e94e9 100644 --- a/board/tqc/tqm8260/Makefile +++ b/board/tqc/tqm8260/Makefile @@ -28,7 +28,7 @@ endif LIB = $(obj)lib$(BOARD).a -COBJS = $(BOARD).o flash.o ../tqm8xx/load_sernum_ethaddr.o +COBJS = $(BOARD).o ../tqm8xx/load_sernum_ethaddr.o SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) OBJS := $(addprefix $(obj),$(COBJS)) diff --git a/board/tqc/tqm8260/flash.c b/board/tqc/tqm8260/flash.c deleted file mode 100644 index cabc818ee9..0000000000 --- a/board/tqc/tqm8260/flash.c +++ /dev/null @@ -1,497 +0,0 @@ -/* - * (C) Copyright 2001, 2002 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * Flash Routines for AMD devices on the TQM8260 board - * - *-------------------------------------------------------------------- - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include <common.h> -#include <mpc8xx.h> - -#define V_ULONG(a) (*(volatile unsigned long *)( a )) -#define V_BYTE(a) (*(volatile unsigned char *)( a )) - - -flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS]; - - -/*----------------------------------------------------------------------- - */ -void flash_reset (void) -{ - if (flash_info[0].flash_id != FLASH_UNKNOWN) { - V_ULONG (flash_info[0].start[0]) = 0x00F000F0; - V_ULONG (flash_info[0].start[0] + 4) = 0x00F000F0; - } -} - -/*----------------------------------------------------------------------- - */ -ulong flash_get_size (ulong baseaddr, flash_info_t * info) -{ - short i; - unsigned long flashtest_h, flashtest_l; - - /* Write auto select command sequence and test FLASH answer */ - V_ULONG (baseaddr + ((ulong) 0x0555 << 3)) = 0x00AA00AA; - V_ULONG (baseaddr + ((ulong) 0x02AA << 3)) = 0x00550055; - V_ULONG (baseaddr + ((ulong) 0x0555 << 3)) = 0x00900090; - V_ULONG (baseaddr + 4 + ((ulong) 0x0555 << 3)) = 0x00AA00AA; - V_ULONG (baseaddr + 4 + ((ulong) 0x02AA << 3)) = 0x00550055; - V_ULONG (baseaddr + 4 + ((ulong) 0x0555 << 3)) = 0x00900090; - - flashtest_h = V_ULONG (baseaddr); /* manufacturer ID */ - flashtest_l = V_ULONG (baseaddr + 4); - - switch ((int) flashtest_h) { - case AMD_MANUFACT: - info->flash_id = FLASH_MAN_AMD; - break; - case FUJ_MANUFACT: - info->flash_id = FLASH_MAN_FUJ; - break; - default: - info->flash_id = FLASH_UNKNOWN; - info->sector_count = 0; - info->size = 0; - return (0); /* no or unknown flash */ - } - - flashtest_h = V_ULONG (baseaddr + 8); /* device ID */ - flashtest_l = V_ULONG (baseaddr + 12); - if (flashtest_h != flashtest_l) { - info->flash_id = FLASH_UNKNOWN; - } else { - switch (flashtest_h) { - case AMD_ID_LV800T: - info->flash_id += FLASH_AM800T; - info->sector_count = 19; - info->size = 0x00400000; - break; /* 4 * 1 MB = 4 MB */ - case AMD_ID_LV800B: - info->flash_id += FLASH_AM800B; - info->sector_count = 19; - info->size = 0x00400000; - break; /* 4 * 1 MB = 4 MB */ - case AMD_ID_LV160T: - info->flash_id += FLASH_AM160T; - info->sector_count = 35; - info->size = 0x00800000; - break; /* 4 * 2 MB = 8 MB */ - case AMD_ID_LV160B: - info->flash_id += FLASH_AM160B; - info->sector_count = 35; - info->size = 0x00800000; - break; /* 4 * 2 MB = 8 MB */ - case AMD_ID_DL322T: - info->flash_id += FLASH_AMDL322T; - info->sector_count = 71; - info->size = 0x01000000; - break; /* 4 * 4 MB = 16 MB */ - case AMD_ID_DL322B: - info->flash_id += FLASH_AMDL322B; - info->sector_count = 71; - info->size = 0x01000000; - break; /* 4 * 4 MB = 16 MB */ - case AMD_ID_DL323T: - info->flash_id += FLASH_AMDL323T; - info->sector_count = 71; - info->size = 0x01000000; - break; /* 4 * 4 MB = 16 MB */ - case AMD_ID_DL323B: - info->flash_id += FLASH_AMDL323B; - info->sector_count = 71; - info->size = 0x01000000; - break; /* 4 * 4 MB = 16 MB */ - case AMD_ID_LV640U: - info->flash_id += FLASH_AM640U; - info->sector_count = 128; - info->size = 0x02000000; - break; /* 4 * 8 MB = 32 MB */ - default: - info->flash_id = FLASH_UNKNOWN; - return (0); /* no or unknown flash */ - } - } - - if (flashtest_h == AMD_ID_LV640U) { - - /* set up sector start adress table (uniform sector type) */ - for (i = 0; i < info->sector_count; i++) - info->start[i] = baseaddr + (i * 0x00040000); - - } else if (info->flash_id & FLASH_BTYPE) { - - /* set up sector start adress table (bottom sector type) */ - info->start[0] = baseaddr + 0x00000000; - info->start[1] = baseaddr + 0x00010000; - info->start[2] = baseaddr + 0x00018000; - info->start[3] = baseaddr + 0x00020000; - for (i = 4; i < info->sector_count; i++) { - info->start[i] = baseaddr + (i * 0x00040000) - 0x000C0000; - } - - } else { - - /* set up sector start adress table (top sector type) */ - i = info->sector_count - 1; - info->start[i--] = baseaddr + info->size - 0x00010000; - info->start[i--] = baseaddr + info->size - 0x00018000; - info->start[i--] = baseaddr + info->size - 0x00020000; - for (; i >= 0; i--) { - info->start[i] = baseaddr + i * 0x00040000; - } - } - - /* check for protected sectors */ - for (i = 0; i < info->sector_count; i++) { - /* read sector protection at sector address, (A7 .. A0) = 0x02 */ - if ((V_ULONG (info->start[i] + 16) & 0x00010001) || - (V_ULONG (info->start[i] + 20) & 0x00010001)) { - info->protect[i] = 1; /* D0 = 1 if protected */ - } else { - info->protect[i] = 0; - } - } - - flash_reset (); - return (info->size); -} - -/*----------------------------------------------------------------------- - */ -unsigned long flash_init (void) -{ - unsigned long size_b0 = 0; - int i; - - /* Init: no FLASHes known */ - for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; ++i) { - flash_info[i].flash_id = FLASH_UNKNOWN; - } - - /* Static FLASH Bank configuration here (only one bank) */ - - size_b0 = flash_get_size (CONFIG_SYS_FLASH0_BASE, &flash_info[0]); - if (flash_info[0].flash_id == FLASH_UNKNOWN || size_b0 == 0) { - printf ("## Unknown FLASH on Bank 0 - Size = 0x%08lx = %ld MB\n", - size_b0, size_b0 >> 20); - } - - /* - * protect monitor and environment sectors - */ - -#if CONFIG_SYS_MONITOR_BASE >= CONFIG_SYS_FLASH0_BASE - flash_protect (FLAG_PROTECT_SET, - CONFIG_SYS_MONITOR_BASE, - CONFIG_SYS_MONITOR_BASE + monitor_flash_len - 1, - &flash_info[0]); -#endif - -#if defined(CONFIG_ENV_IS_IN_FLASH) && defined(CONFIG_ENV_ADDR) -# ifndef CONFIG_ENV_SIZE -# define CONFIG_ENV_SIZE CONFIG_ENV_SECT_SIZE -# endif - flash_protect (FLAG_PROTECT_SET, - CONFIG_ENV_ADDR, - CONFIG_ENV_ADDR + CONFIG_ENV_SIZE - 1, - &flash_info[0]); -#endif - -#if defined(CONFIG_ENV_IS_IN_FLASH) && defined(CONFIG_ENV_ADDR_REDUND) - flash_protect (FLAG_PROTECT_SET, - CONFIG_ENV_ADDR_REDUND, - CONFIG_ENV_ADDR_REDUND + CONFIG_ENV_SIZE_REDUND - 1, - &flash_info[0]); -#endif - - return (size_b0); -} - -/*----------------------------------------------------------------------- - */ -void flash_print_info (flash_info_t * info) -{ - int i; - - if (info->flash_id == FLASH_UNKNOWN) { - printf ("missing or unknown FLASH type\n"); - return; - } - - switch (info->flash_id & FLASH_VENDMASK) { - case FLASH_MAN_AMD: - printf ("AMD "); - break; - case FLASH_MAN_FUJ: - printf ("FUJITSU "); - break; - default: - printf ("Unknown Vendor "); - break; - } - - switch (info->flash_id & FLASH_TYPEMASK) { - case FLASH_AM800T: - printf ("29LV800T (8 M, top sector)\n"); - break; - case FLASH_AM800B: - printf ("29LV800T (8 M, bottom sector)\n"); - break; - case FLASH_AM160T: - printf ("29LV160T (16 M, top sector)\n"); - break; - case FLASH_AM160B: - printf ("29LV160B (16 M, bottom sector)\n"); - break; - case FLASH_AMDL322T: - printf ("29DL322T (32 M, top sector)\n"); - break; - case FLASH_AMDL322B: - printf ("29DL322B (32 M, bottom sector)\n"); - break; - case FLASH_AMDL323T: - printf ("29DL323T (32 M, top sector)\n"); - break; - case FLASH_AMDL323B: - printf ("29DL323B (32 M, bottom sector)\n"); - break; - case FLASH_AM640U: - printf ("29LV640D (64 M, uniform sector)\n"); - break; - default: - printf ("Unknown Chip Type\n"); - break; - } - - printf (" Size: %ld MB in %d Sectors\n", - info->size >> 20, info->sector_count); - - printf (" Sector Start Addresses:"); - for (i = 0; i < info->sector_count; ++i) { - if ((i % 5) == 0) - printf ("\n "); - printf (" %08lX%s", - info->start[i], - info->protect[i] ? " (RO)" : " " - ); - } - printf ("\n"); - return; -} - -/*----------------------------------------------------------------------- - */ -int flash_erase (flash_info_t * info, int s_first, int s_last) -{ - int flag, prot, sect, l_sect; - ulong start, now, last; - - if ((s_first < 0) || (s_first > s_last)) { - if (info->flash_id == FLASH_UNKNOWN) { - printf ("- missing\n"); - } else { - printf ("- no sectors to erase\n"); - } - return 1; - } - - prot = 0; - for (sect = s_first; sect <= s_last; sect++) { - if (info->protect[sect]) - prot++; - } - - if (prot) { - printf ("- Warning: %d protected sectors will not be erased!\n", - prot); - } else { - printf ("\n"); - } - - l_sect = -1; - - /* Disable interrupts which might cause a timeout here */ - flag = disable_interrupts (); - - V_ULONG (info->start[0] + (0x0555 << 3)) = 0x00AA00AA; - V_ULONG (info->start[0] + (0x02AA << 3)) = 0x00550055; - V_ULONG (info->start[0] + (0x0555 << 3)) = 0x00800080; - V_ULONG (info->start[0] + (0x0555 << 3)) = 0x00AA00AA; - V_ULONG (info->start[0] + (0x02AA << 3)) = 0x00550055; - V_ULONG (info->start[0] + 4 + (0x0555 << 3)) = 0x00AA00AA; - V_ULONG (info->start[0] + 4 + (0x02AA << 3)) = 0x00550055; - V_ULONG (info->start[0] + 4 + (0x0555 << 3)) = 0x00800080; - V_ULONG (info->start[0] + 4 + (0x0555 << 3)) = 0x00AA00AA; - V_ULONG (info->start[0] + 4 + (0x02AA << 3)) = 0x00550055; - udelay (1000); - - /* Start erase on unprotected sectors */ - for (sect = s_first; sect <= s_last; sect++) { - if (info->protect[sect] == 0) { /* not protected */ - V_ULONG (info->start[sect]) = 0x00300030; - V_ULONG (info->start[sect] + 4) = 0x00300030; - l_sect = sect; - } - } - - /* re-enable interrupts if necessary */ - if (flag) - enable_interrupts (); - - /* wait at least 80us - let's wait 1 ms */ - udelay (1000); - - /* - * We wait for the last triggered sector - */ - if (l_sect < 0) - goto DONE; - - start = get_timer (0); - last = start; - while ((V_ULONG (info->start[l_sect]) & 0x00800080) != 0x00800080 || - (V_ULONG (info->start[l_sect] + 4) & 0x00800080) != 0x00800080) - { - if ((now = get_timer (start)) > CONFIG_SYS_FLASH_ERASE_TOUT) { - printf ("Timeout\n"); - return 1; - } - /* show that we're waiting */ - if ((now - last) > 1000) { /* every second */ - serial_putc ('.'); - last = now; - } - } - - DONE: - /* reset to read mode */ - flash_reset (); - - printf (" done\n"); - return 0; -} - -static int write_dword (flash_info_t *, ulong, unsigned char *); - -/*----------------------------------------------------------------------- - * Copy memory to flash, returns: - * 0 - OK - * 1 - write timeout - * 2 - Flash not erased - */ - -int write_buff (flash_info_t * info, uchar * src, ulong addr, ulong cnt) -{ - ulong dp; - static unsigned char bb[8]; - int i, l, rc, cc = cnt; - - dp = (addr & ~7); /* get lower dword aligned address */ - - /* - * handle unaligned start bytes - */ - if ((l = addr - dp) != 0) { - for (i = 0; i < 8; i++) - bb[i] = (i < l || (i - l) >= cc) ? V_BYTE (dp + i) : *src++; - if ((rc = write_dword (info, dp, bb)) != 0) { - return (rc); - } - dp += 8; - cc -= 8 - l; - } - - /* - * handle word aligned part - */ - while (cc >= 8) { - if ((rc = write_dword (info, dp, src)) != 0) { - return (rc); - } - dp += 8; - src += 8; - cc -= 8; - } - - if (cc <= 0) { - return (0); - } - - /* - * handle unaligned tail bytes - */ - for (i = 0; i < 8; i++) { - bb[i] = (i < cc) ? *src++ : V_BYTE (dp + i); - } - return (write_dword (info, dp, bb)); -} - -/*----------------------------------------------------------------------- - * Write a dword to Flash, returns: - * 0 - OK - * 1 - write timeout - * 2 - Flash not erased - */ -static int write_dword (flash_info_t * info, ulong dest, unsigned char *pdata) -{ - ulong start, cl, ch; - int flag, i; - - for (ch = 0, i = 0; i < 4; i++) - ch = (ch << 8) + *pdata++; /* high word */ - for (cl = 0, i = 0; i < 4; i++) - cl = (cl << 8) + *pdata++; /* low word */ - - /* Check if Flash is (sufficiently) erased */ - if ((*((vu_long *) dest) & ch) != ch - || (*((vu_long *) (dest + 4)) & cl) != cl) { - return (2); - } - - /* Disable interrupts which might cause a timeout here */ - flag = disable_interrupts (); - - V_ULONG (info->start[0] + (0x0555 << 3)) = 0x00AA00AA; - V_ULONG (info->start[0] + (0x02AA << 3)) = 0x00550055; - V_ULONG (info->start[0] + (0x0555 << 3)) = 0x00A000A0; - V_ULONG (dest) = ch; - V_ULONG (info->start[0] + 4 + (0x0555 << 3)) = 0x00AA00AA; - V_ULONG (info->start[0] + 4 + (0x02AA << 3)) = 0x00550055; - V_ULONG (info->start[0] + 4 + (0x0555 << 3)) = 0x00A000A0; - V_ULONG (dest + 4) = cl; - - /* re-enable interrupts if necessary */ - if (flag) - enable_interrupts (); - - /* data polling for D7 */ - start = get_timer (0); - while (((V_ULONG (dest) & 0x00800080) != (ch & 0x00800080)) || - ((V_ULONG (dest + 4) & 0x00800080) != (cl & 0x00800080))) { - if (get_timer (start) > CONFIG_SYS_FLASH_WRITE_TOUT) { - return (1); - } - } - return (0); -} diff --git a/board/tqc/tqm85xx/tqm85xx.c b/board/tqc/tqm85xx/tqm85xx.c index 97d49eae0b..3a828edc1a 100644 --- a/board/tqc/tqm85xx/tqm85xx.c +++ b/board/tqc/tqm85xx/tqm85xx.c @@ -23,7 +23,7 @@ * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License @@ -702,7 +702,7 @@ void pci_init_board (void) #ifdef CONFIG_OF_BOARD_SETUP extern void ft_fsl_pci_setup(void *blob, const char *pci_alias, - struct pci_controller *hose); + struct pci_controller *hose); void ft_board_setup (void *blob, bd_t *bd) { diff --git a/board/versatile/versatile.c b/board/versatile/versatile.c index 3b9b0207a3..0f35caa9be 100644 --- a/board/versatile/versatile.c +++ b/board/versatile/versatile.c @@ -37,10 +37,6 @@ DECLARE_GLOBAL_DATA_PTR; -void flash__init (void); -void ether__init (void); -void peripheral_power_enable (void); - #if defined(CONFIG_SHOW_BOOT_PROGRESS) void show_boot_progress(int progress) { @@ -82,8 +78,6 @@ int board_init (void) icache_enable (); - flash__init (); - ether__init (); return 0; } @@ -98,22 +92,6 @@ int misc_init_r (void) Routine: Description: ******************************/ -void flash__init (void) -{ -} -/************************************************************* - Routine:ether__init - Description: take the Ethernet controller out of reset and wait - for the EEPROM load to complete. -*************************************************************/ -void ether__init (void) -{ -} - -/****************************** - Routine: - Description: -******************************/ int dram_init (void) { return 0; diff --git a/board/zylonite/nand.c b/board/zylonite/nand.c index 895fb2bacd..899445ee6b 100644 --- a/board/zylonite/nand.c +++ b/board/zylonite/nand.c @@ -46,8 +46,6 @@ # define DFC_DEBUG3(fmt, args...) #endif -#define MIN(x, y) ((x < y) ? x : y) - /* These really don't belong here, as they are specific to the NAND Model */ static uint8_t scan_ff_pattern[] = { 0xff, 0xff }; diff --git a/common/Makefile b/common/Makefile index f00cbd9291..6484b239a3 100644 --- a/common/Makefile +++ b/common/Makefile @@ -42,7 +42,7 @@ COBJS-y += s_record.o COBJS-y += serial.o COBJS-y += xyzModem.o -#core command +# core command COBJS-y += cmd_boot.o COBJS-y += cmd_bootm.o COBJS-y += cmd_nvedit.o @@ -148,6 +148,9 @@ endif COBJS-$(CONFIG_CMD_XIMG) += cmd_ximg.o COBJS-$(CONFIG_YAFFS2) += cmd_yaffs2.o COBJS-$(CONFIG_VFD) += cmd_vfd.o + +# others +COBJS-$(CONFIG_DDR_SPD) += ddr_spd.o COBJS-$(CONFIG_CMD_DOC) += docecc.o COBJS-y += flash.o COBJS-y += kgdb.o @@ -155,7 +158,7 @@ COBJS-$(CONFIG_LCD) += lcd.o COBJS-$(CONFIG_LYNXKDI) += lynxkdi.o COBJS-$(CONFIG_UPDATE_TFTP) += update.o COBJS-$(CONFIG_USB_KEYBOARD) += usb_kbd.o -COBJS-$(CONFIG_DDR_SPD) += ddr_spd.o + COBJS := $(sort $(COBJS-y)) SRCS := $(AOBJS:.o=.S) $(COBJS:.o=.c) diff --git a/common/cmd_bedbug.c b/common/cmd_bedbug.c index 3e597f9820..e6277c9408 100644 --- a/common/cmd_bedbug.c +++ b/common/cmd_bedbug.c @@ -13,10 +13,6 @@ DECLARE_GLOBAL_DATA_PTR; -#ifndef MAX -#define MAX(a,b) ((a) > (b) ? (a) : (b)) -#endif - extern void show_regs __P ((struct pt_regs *)); extern int run_command __P ((const char *, int)); extern char console_buffer[]; diff --git a/common/cmd_elf.c b/common/cmd_elf.c index 3ebb6d9354..4d8e1d2762 100644 --- a/common/cmd_elf.c +++ b/common/cmd_elf.c @@ -23,10 +23,6 @@ DECLARE_GLOBAL_DATA_PTR; #endif -#ifndef MAX -#define MAX(a,b) ((a) > (b) ? (a) : (b)) -#endif - int valid_elf_image (unsigned long addr); unsigned long load_elf_image (unsigned long addr); diff --git a/common/cmd_i2c.c b/common/cmd_i2c.c index 84ecf49726..448f2fedd7 100644 --- a/common/cmd_i2c.c +++ b/common/cmd_i2c.c @@ -249,7 +249,6 @@ int do_i2c_mm ( cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) return mod_i2c_mem (cmdtp, 1, flag, argc, argv); } - int do_i2c_nm ( cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) { return mod_i2c_mem (cmdtp, 0, flag, argc, argv); @@ -339,7 +338,6 @@ int do_i2c_mw ( cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) return (0); } - /* Calculate a CRC on memory * * Syntax: @@ -409,7 +407,6 @@ int do_i2c_crc (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) return 0; } - /* Modify memory. * * Syntax: @@ -587,7 +584,6 @@ int do_i2c_probe (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) return 0; } - /* * Syntax: * iloop {i2c_chip} {addr}{.0, .1, .2} [{length}] [{delay}] @@ -658,7 +654,6 @@ int do_i2c_loop(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) return 0; } - /* * The SDRAM command is separately configured because many * (most?) embedded boards don't use SDRAM DIMMs. @@ -1601,4 +1596,3 @@ int i2x_mux_select_mux(int bus) return 0; } #endif /* CONFIG_I2C_MUX */ - diff --git a/cpu/arm1136/mx31/interrupts.c b/cpu/arm1136/mx31/interrupts.c index b36c58c6ac..ab7202fef2 100644 --- a/cpu/arm1136/mx31/interrupts.c +++ b/cpu/arm1136/mx31/interrupts.c @@ -23,6 +23,7 @@ #include <common.h> #include <asm/arch/mx31-regs.h> +#include <div64.h> #define TIMER_BASE 0x53f90000 /* General purpose timer 1 */ @@ -38,24 +39,55 @@ #define GPTCR_CLKSOURCE_32 (4 << 6) /* Clock source */ #define GPTCR_TEN 1 /* Timer enable */ +static ulong timestamp; +static ulong lastinc; + /* "time" is measured in 1 / CONFIG_SYS_HZ seconds, "tick" is internal timer period */ #ifdef CONFIG_MX31_TIMER_HIGH_PRECISION /* ~0.4% error - measured with stop-watch on 100s boot-delay */ -#define TICK_TO_TIME(t) ((t) * CONFIG_SYS_HZ / CONFIG_MX31_CLK32) -#define TIME_TO_TICK(t) ((unsigned long long)(t) * CONFIG_MX31_CLK32 / CONFIG_SYS_HZ) -#define US_TO_TICK(t) (((unsigned long long)(t) * CONFIG_MX31_CLK32 + \ - 999999) / 1000000) +static inline unsigned long long tick_to_time(unsigned long long tick) +{ + tick *= CONFIG_SYS_HZ; + do_div(tick, CONFIG_MX31_CLK32); + return tick; +} + +static inline unsigned long long time_to_tick(unsigned long long time) +{ + time *= CONFIG_MX31_CLK32; + do_div(time, CONFIG_SYS_HZ); + return time; +} + +static inline unsigned long long us_to_tick(unsigned long long us) +{ + us = us * CONFIG_MX31_CLK32 + 999999; + do_div(us, 1000000); + return us; +} #else /* ~2% error */ #define TICK_PER_TIME ((CONFIG_MX31_CLK32 + CONFIG_SYS_HZ / 2) / CONFIG_SYS_HZ) #define US_PER_TICK (1000000 / CONFIG_MX31_CLK32) -#define TICK_TO_TIME(t) ((t) / TICK_PER_TIME) -#define TIME_TO_TICK(t) ((unsigned long long)(t) * TICK_PER_TIME) -#define US_TO_TICK(t) (((t) + US_PER_TICK - 1) / US_PER_TICK) -#endif -static ulong timestamp; -static ulong lastinc; +static inline unsigned long long tick_to_time(unsigned long long tick) +{ + do_div(tick, TICK_PER_TIME); + return tick; +} + +static inline unsigned long long time_to_tick(unsigned long long time) +{ + return time * TICK_PER_TIME; +} + +static inline unsigned long long us_to_tick(unsigned long long us) +{ + us += US_PER_TICK - 1; + do_div(us, US_PER_TICK); + return us; +} +#endif /* nothing really to do with interrupts, just starts up a counter. */ /* The 32768Hz 32-bit timer overruns in 131072 seconds */ @@ -107,7 +139,7 @@ ulong get_timer_masked (void) * 5 * 10^9 days... and get_ticks() * CONFIG_SYS_HZ wraps in * 5 * 10^6 days - long enough. */ - return TICK_TO_TIME(get_ticks()); + return tick_to_time(get_ticks()); } ulong get_timer (ulong base) @@ -117,7 +149,7 @@ ulong get_timer (ulong base) void set_timer (ulong t) { - timestamp = TIME_TO_TICK(t); + timestamp = time_to_tick(t); } /* delay x useconds AND perserve advance timstamp value */ @@ -126,7 +158,7 @@ void udelay (unsigned long usec) unsigned long long tmp; ulong tmo; - tmo = US_TO_TICK(usec); + tmo = us_to_tick(usec); tmp = get_ticks() + tmo; /* get current timestamp */ while (get_ticks() < tmp) /* loop till event */ diff --git a/cpu/arm926ejs/Makefile b/cpu/arm926ejs/Makefile index 0facce4703..d5ac7d3fd9 100644 --- a/cpu/arm926ejs/Makefile +++ b/cpu/arm926ejs/Makefile @@ -26,7 +26,7 @@ include $(TOPDIR)/config.mk LIB = $(obj)lib$(CPU).a START = start.o -COBJS = interrupts.o cpu.o cpuinfo.o +COBJS = interrupts.o cpu.o SRCS := $(START:.o=.S) $(SOBJS:.o=.S) $(COBJS:.o=.c) OBJS := $(addprefix $(obj),$(COBJS) $(SOBJS)) diff --git a/cpu/arm926ejs/omap/Makefile b/cpu/arm926ejs/omap/Makefile index c335d5c866..74aea74189 100644 --- a/cpu/arm926ejs/omap/Makefile +++ b/cpu/arm926ejs/omap/Makefile @@ -25,7 +25,7 @@ include $(TOPDIR)/config.mk LIB = $(obj)lib$(SOC).a -COBJS = timer.o +COBJS = timer.o cpuinfo.o SOBJS = reset.o SRCS := $(START:.o=.S) $(SOBJS:.o=.S) $(COBJS:.o=.c) diff --git a/cpu/arm926ejs/cpuinfo.c b/cpu/arm926ejs/omap/cpuinfo.c index 35ba7dba0f..35ba7dba0f 100644 --- a/cpu/arm926ejs/cpuinfo.c +++ b/cpu/arm926ejs/omap/cpuinfo.c diff --git a/cpu/ixp/npe/include/IxEthDB_p.h b/cpu/ixp/npe/include/IxEthDB_p.h index e7c67ae520..ccec7ea7be 100644 --- a/cpu/ixp/npe/include/IxEthDB_p.h +++ b/cpu/ixp/npe/include/IxEthDB_p.h @@ -193,8 +193,6 @@ extern int overflowEvent; #define LEFT (-1) /* macros */ -#define MIN(a, b) ((a) < (b) ? (a) : (b)) - #define IX_ETH_DB_CHECK_PORT_EXISTS(portID) \ { \ if ((portID) >= IX_ETH_DB_NUMBER_OF_PORTS) \ diff --git a/cpu/mcf5227x/Makefile b/cpu/mcf5227x/Makefile index d0e9b4550f..44f93850e2 100644 --- a/cpu/mcf5227x/Makefile +++ b/cpu/mcf5227x/Makefile @@ -28,7 +28,7 @@ include $(TOPDIR)/config.mk LIB = lib$(CPU).a START = start.o -COBJS = cpu.o speed.o cpu_init.o interrupts.o +COBJS = cpu.o speed.o cpu_init.o interrupts.o dspi.o SRCS := $(START:.o=.S) $(SOBJS:.o=.S) $(COBJS:.o=.c) OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS)) diff --git a/cpu/mcf5227x/cpu.c b/cpu/mcf5227x/cpu.c index 765aec639a..d9f5f43c3c 100644 --- a/cpu/mcf5227x/cpu.c +++ b/cpu/mcf5227x/cpu.c @@ -65,12 +65,12 @@ int checkcpu(void) printf("Freescale MCF%d (Mask:%01x Version:%x)\n", id, msk, ver); printf(" CPU CLK %s MHz BUS CLK %s MHz FLB CLK %s MHz\n", - strmhz(buf1, gd->cpu_clk)), - strmhz(buf2, gd->bus_clk)), - strmhz(buf3, gd->flb_clk))); + strmhz(buf1, gd->cpu_clk), + strmhz(buf2, gd->bus_clk), + strmhz(buf3, gd->flb_clk)); printf(" INP CLK %s MHz VCO CLK %s MHz\n", - strmhz(buf1, gd->inp_clk)), - strmhz(buf2, gd->vco_clk))); + strmhz(buf1, gd->inp_clk), + strmhz(buf2, gd->vco_clk)); } return 0; diff --git a/cpu/mcf5227x/cpu_init.c b/cpu/mcf5227x/cpu_init.c index 0f1dd1f125..8945ef3160 100644 --- a/cpu/mcf5227x/cpu_init.c +++ b/cpu/mcf5227x/cpu_init.c @@ -45,6 +45,7 @@ void cpu_init_f(void) volatile fbcs_t *fbcs = (fbcs_t *) MMAP_FBCS; volatile pll_t *pll = (volatile pll_t *)MMAP_PLL; +#if !defined(CONFIG_CF_SBF) /* Workaround, must place before fbcs */ pll->psr = 0x12; @@ -58,37 +59,44 @@ void cpu_init_f(void) scm1->pacrg = 0; scm1->pacri = 0; -#if (defined(CONFIG_SYS_CS0_BASE) && defined(CONFIG_SYS_CS0_MASK) && defined(CONFIG_SYS_CS0_CTRL)) +#if (defined(CONFIG_SYS_CS0_BASE) && defined(CONFIG_SYS_CS0_MASK) \ + && defined(CONFIG_SYS_CS0_CTRL)) fbcs->csar0 = CONFIG_SYS_CS0_BASE; fbcs->cscr0 = CONFIG_SYS_CS0_CTRL; fbcs->csmr0 = CONFIG_SYS_CS0_MASK; #endif +#endif /* CONFIG_CF_SBF */ -#if (defined(CONFIG_SYS_CS1_BASE) && defined(CONFIG_SYS_CS1_MASK) && defined(CONFIG_SYS_CS1_CTRL)) +#if (defined(CONFIG_SYS_CS1_BASE) && defined(CONFIG_SYS_CS1_MASK) \ + && defined(CONFIG_SYS_CS1_CTRL)) fbcs->csar1 = CONFIG_SYS_CS1_BASE; fbcs->cscr1 = CONFIG_SYS_CS1_CTRL; fbcs->csmr1 = CONFIG_SYS_CS1_MASK; #endif -#if (defined(CONFIG_SYS_CS2_BASE) && defined(CONFIG_SYS_CS2_MASK) && defined(CONFIG_SYS_CS2_CTRL)) +#if (defined(CONFIG_SYS_CS2_BASE) && defined(CONFIG_SYS_CS2_MASK) \ + && defined(CONFIG_SYS_CS2_CTRL)) fbcs->csar2 = CONFIG_SYS_CS2_BASE; fbcs->cscr2 = CONFIG_SYS_CS2_CTRL; fbcs->csmr2 = CONFIG_SYS_CS2_MASK; #endif -#if (defined(CONFIG_SYS_CS3_BASE) && defined(CONFIG_SYS_CS3_MASK) && defined(CONFIG_SYS_CS3_CTRL)) +#if (defined(CONFIG_SYS_CS3_BASE) && defined(CONFIG_SYS_CS3_MASK) \ + && defined(CONFIG_SYS_CS3_CTRL)) fbcs->csar3 = CONFIG_SYS_CS3_BASE; fbcs->cscr3 = CONFIG_SYS_CS3_CTRL; fbcs->csmr3 = CONFIG_SYS_CS3_MASK; #endif -#if (defined(CONFIG_SYS_CS4_BASE) && defined(CONFIG_SYS_CS4_MASK) && defined(CONFIG_SYS_CS4_CTRL)) +#if (defined(CONFIG_SYS_CS4_BASE) && defined(CONFIG_SYS_CS4_MASK) \ + && defined(CONFIG_SYS_CS4_CTRL)) fbcs->csar4 = CONFIG_SYS_CS4_BASE; fbcs->cscr4 = CONFIG_SYS_CS4_CTRL; fbcs->csmr4 = CONFIG_SYS_CS4_MASK; #endif -#if (defined(CONFIG_SYS_CS5_BASE) && defined(CONFIG_SYS_CS5_MASK) && defined(CONFIG_SYS_CS5_CTRL)) +#if (defined(CONFIG_SYS_CS5_BASE) && defined(CONFIG_SYS_CS5_MASK) \ + && defined(CONFIG_SYS_CS5_CTRL)) fbcs->csar5 = CONFIG_SYS_CS5_BASE; fbcs->cscr5 = CONFIG_SYS_CS5_CTRL; fbcs->csmr5 = CONFIG_SYS_CS5_MASK; diff --git a/cpu/mcf5227x/dspi.c b/cpu/mcf5227x/dspi.c new file mode 100644 index 0000000000..7f48f91844 --- /dev/null +++ b/cpu/mcf5227x/dspi.c @@ -0,0 +1,261 @@ +/* + * + * (C) Copyright 2000-2003 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * Copyright (C) 2004-2008 Freescale Semiconductor, Inc. + * TsiChung Liew (Tsi-Chung.Liew@freescale.com) + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <spi.h> +#include <malloc.h> + +#if defined(CONFIG_CF_DSPI) +#include <asm/immap.h> + +void dspi_init(void) +{ + volatile gpio_t *gpio = (gpio_t *) MMAP_GPIO; + volatile dspi_t *dspi = (dspi_t *) MMAP_DSPI; + + gpio->par_dspi = + GPIO_PAR_DSPI_SIN_SIN | GPIO_PAR_DSPI_SOUT_SOUT | + GPIO_PAR_DSPI_SCK_SCK; + + dspi->dmcr = DSPI_DMCR_MSTR | DSPI_DMCR_CSIS7 | DSPI_DMCR_CSIS6 | + DSPI_DMCR_CSIS5 | DSPI_DMCR_CSIS4 | DSPI_DMCR_CSIS3 | + DSPI_DMCR_CSIS2 | DSPI_DMCR_CSIS1 | DSPI_DMCR_CSIS0 | + DSPI_DMCR_CRXF | DSPI_DMCR_CTXF; + +#ifdef CONFIG_SYS_DSPI_DCTAR0 + dspi->dctar0 = CONFIG_SYS_DSPI_DCTAR0; +#endif +#ifdef CONFIG_SYS_DSPI_DCTAR1 + dspi->dctar1 = CONFIG_SYS_DSPI_DCTAR1; +#endif +#ifdef CONFIG_SYS_DSPI_DCTAR2 + dspi->dctar2 = CONFIG_SYS_DSPI_DCTAR2; +#endif +#ifdef CONFIG_SYS_DSPI_DCTAR3 + dspi->dctar3 = CONFIG_SYS_DSPI_DCTAR3; +#endif +#ifdef CONFIG_SYS_DSPI_DCTAR4 + dspi->dctar4 = CONFIG_SYS_DSPI_DCTAR4; +#endif +#ifdef CONFIG_SYS_DSPI_DCTAR5 + dspi->dctar5 = CONFIG_SYS_DSPI_DCTAR5; +#endif +#ifdef CONFIG_SYS_DSPI_DCTAR6 + dspi->dctar6 = CONFIG_SYS_DSPI_DCTAR6; +#endif +#ifdef CONFIG_SYS_DSPI_DCTAR7 + dspi->dctar7 = CONFIG_SYS_DSPI_DCTAR7; +#endif +} + +void dspi_tx(int chipsel, u8 attrib, u16 data) +{ + volatile dspi_t *dspi = (dspi_t *) MMAP_DSPI; + + while ((dspi->dsr & 0x0000F000) >= 4) ; + + dspi->dtfr = (attrib << 24) | ((1 << chipsel) << 16) | data; +} + +u16 dspi_rx(void) +{ + volatile dspi_t *dspi = (dspi_t *) MMAP_DSPI; + + while ((dspi->dsr & 0x000000F0) == 0) ; + + return (dspi->drfr & 0xFFFF); +} + +#if defined(CONFIG_CMD_SPI) +void spi_init_f(void) +{ +} + +void spi_init_r(void) +{ +} + +void spi_init(void) +{ + dspi_init(); +} + +struct spi_slave *spi_setup_slave(unsigned int bus, unsigned int cs, + unsigned int max_hz, unsigned int mode) +{ + volatile gpio_t *gpio = (gpio_t *) MMAP_GPIO; + struct spi_slave *slave; + + slave = malloc(sizeof(struct spi_slave)); + if (!slave) + return NULL; + + switch (cs) { + case 0: + gpio->par_dspi &= ~GPIO_PAR_DSPI_PCS0_PCS0; + gpio->par_dspi |= GPIO_PAR_DSPI_PCS0_PCS0; + break; + case 2: + gpio->par_timer &= GPIO_PAR_TIMER_T2IN_MASK; + gpio->par_timer |= GPIO_PAR_TIMER_T2IN_DSPIPCS2; + break; + } + + slave->bus = bus; + slave->cs = cs; + + return slave; +} + +void spi_free_slave(struct spi_slave *slave) +{ + volatile gpio_t *gpio = (gpio_t *) MMAP_GPIO; + + switch (slave->cs) { + case 0: + gpio->par_dspi &= ~GPIO_PAR_DSPI_PCS0_PCS0; + break; + case 2: + gpio->par_timer &= GPIO_PAR_TIMER_T2IN_MASK; + break; + } + + free(slave); +} + +int spi_claim_bus(struct spi_slave *slave) +{ + return 0; +} + +void spi_release_bus(struct spi_slave *slave) +{ +} + +int spi_xfer(struct spi_slave *slave, unsigned int bitlen, const void *dout, + void *din, unsigned long flags) +{ + static int bWrite = 0; + u8 *spi_rd, *spi_wr; + int len = bitlen >> 3; + + spi_rd = (u8 *) din; + spi_wr = (u8 *) dout; + + /* command handling */ + if (((len == 4) || (len == 1) || (len == 5)) && (dout != NULL)) { + switch (*spi_wr) { + case 0x02: /* Page Prog */ + bWrite = 1; + dspi_tx(slave->cs, 0x80, spi_wr[0]); + dspi_rx(); + dspi_tx(slave->cs, 0x80, spi_wr[1]); + dspi_rx(); + dspi_tx(slave->cs, 0x80, spi_wr[2]); + dspi_rx(); + dspi_tx(slave->cs, 0x80, spi_wr[3]); + dspi_rx(); + return 0; + case 0x05: /* Read Status */ + if (len == 4) + if ((spi_wr[1] == 0xFF) && (spi_wr[2] == 0xFF) + && (spi_wr[3] == 0xFF)) { + dspi_tx(slave->cs, 0x80, *spi_wr); + dspi_rx(); + } + return 0; + case 0x06: /* WREN */ + dspi_tx(slave->cs, 0x00, *spi_wr); + dspi_rx(); + return 0; + case 0x0B: /* Fast read */ + if ((len == 5) && (spi_wr[4] == 0)) { + dspi_tx(slave->cs, 0x80, spi_wr[0]); + dspi_rx(); + dspi_tx(slave->cs, 0x80, spi_wr[1]); + dspi_rx(); + dspi_tx(slave->cs, 0x80, spi_wr[2]); + dspi_rx(); + dspi_tx(slave->cs, 0x80, spi_wr[3]); + dspi_rx(); + dspi_tx(slave->cs, 0x80, spi_wr[4]); + dspi_rx(); + } + return 0; + case 0x9F: /* RDID */ + dspi_tx(slave->cs, 0x80, *spi_wr); + dspi_rx(); + return 0; + case 0xD8: /* Sector erase */ + if (len == 4) + if ((spi_wr[2] == 0) && (spi_wr[3] == 0)) { + dspi_tx(slave->cs, 0x80, spi_wr[0]); + dspi_rx(); + dspi_tx(slave->cs, 0x80, spi_wr[1]); + dspi_rx(); + dspi_tx(slave->cs, 0x80, spi_wr[2]); + dspi_rx(); + dspi_tx(slave->cs, 0x00, spi_wr[3]); + dspi_rx(); + } + return 0; + } + } + + if (bWrite) + len--; + + while (len--) { + if (dout != NULL) { + dspi_tx(slave->cs, 0x80, *spi_wr); + dspi_rx(); + spi_wr++; + } + + if (din != NULL) { + dspi_tx(slave->cs, 0x80, 0); + *spi_rd = dspi_rx(); + spi_rd++; + } + } + + if (flags == SPI_XFER_END) { + if (bWrite) { + dspi_tx(slave->cs, 0x00, *spi_wr); + dspi_rx(); + bWrite = 0; + } else { + dspi_tx(slave->cs, 0x00, 0); + dspi_rx(); + } + } + + return 0; +} +#endif /* CONFIG_CMD_SPI */ + +#endif /* CONFIG_CF_DSPI */ diff --git a/cpu/mcf5227x/speed.c b/cpu/mcf5227x/speed.c index 74b9059d3d..7e385d3998 100644 --- a/cpu/mcf5227x/speed.c +++ b/cpu/mcf5227x/speed.c @@ -90,17 +90,33 @@ int get_clocks(void) int vco, temp, pcrvalue, pfdr; u8 bootmode; - bootmode = (ccm->ccr & 0x000C) >> 2; - pcrvalue = pll->pcr & 0xFF0F0FFF; pfdr = pcrvalue >> 24; - if (pfdr != 0x1E) { + if (pfdr == 0x1E) + bootmode = 0; /* Normal Mode */ + +#ifdef CONFIG_CF_SBF + bootmode = 3; /* Serial Mode */ +#endif + + if (bootmode == 0) { + /* Normal mode */ + vco = ((pll->pcr & 0xFF000000) >> 24) * CONFIG_SYS_INPUT_CLKSRC; + if ((vco < CLOCK_PLL_FVCO_MIN) || (vco > CLOCK_PLL_FVCO_MAX)) { + /* Default value */ + pcrvalue = (pll->pcr & 0x00FFFFFF); + pcrvalue |= 0x1E << 24; + pll->pcr = pcrvalue; + vco = + ((pll->pcr & 0xFF000000) >> 24) * + CONFIG_SYS_INPUT_CLKSRC; + } + gd->vco_clk = vco; /* Vco clock */ + } else if (bootmode == 3) { /* serial mode */ - } else { - /* Normal Mode */ - vco = pfdr * CONFIG_SYS_INPUT_CLKSRC; - gd->vco_clk = vco; + vco = ((pll->pcr & 0xFF000000) >> 24) * CONFIG_SYS_INPUT_CLKSRC; + gd->vco_clk = vco; /* Vco clock */ } if ((ccm->ccr & CCM_MISCCR_LIMP) == CCM_MISCCR_LIMP) { diff --git a/cpu/mcf5227x/start.S b/cpu/mcf5227x/start.S index becaab7c25..93872507b1 100644 --- a/cpu/mcf5227x/start.S +++ b/cpu/mcf5227x/start.S @@ -46,6 +46,11 @@ addl #60,%sp; /* space for 15 regs */ \ rte; +#if defined(CONFIG_CF_SBF) +#define ASM_DRAMINIT (asm_dram_init - TEXT_BASE + CONFIG_SYS_INIT_RAM_ADDR) +#define ASM_SBF_IMG_HDR (asm_sbf_img_hdr - TEXT_BASE + CONFIG_SYS_INIT_RAM_ADDR) +#endif + .text /* * Vector table. This is used for initial platform startup. @@ -53,8 +58,14 @@ */ _vectors: -INITSP: .long 0x00000000 /* Initial SP */ -INITPC: .long _START /* Initial PC */ +#if defined(CONFIG_CF_SBF) +INITSP: .long 0 /* Initial SP */ +INITPC: .long ASM_DRAMINIT /* Initial PC */ +#else +INITSP: .long 0 /* Initial SP */ +INITPC: .long _START /* Initial PC */ +#endif + vector02: .long _FAULT /* Access Error */ vector03: .long _FAULT /* Address Error */ vector04: .long _FAULT /* Illegal Instruction */ @@ -83,6 +94,7 @@ vector1D: .long _FAULT /* Autovector Level 5 */ vector1E: .long _FAULT /* Autovector Level 6 */ vector1F: .long _FAULT /* Autovector Level 7 */ +#if !defined(CONFIG_CF_SBF) /* TRAP #0 - #15 */ vector20_2F: .long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT @@ -122,9 +134,231 @@ vector192_255: .long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT .long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT .long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT +#endif - .text +#if defined(CONFIG_CF_SBF) + /* Image header: chksum 4 bytes, len 4 bytes, img dest 4 bytes */ +asm_sbf_img_hdr: + .long 0x00000000 /* checksum, not yet implemented */ + .long 0x00020000 /* image length */ + .long TEXT_BASE /* image to be relocated at */ + +asm_dram_init: + move.l #(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_RAM_CTRL), %d0 + movec %d0, %RAMBAR1 /* init Rambar */ + move.l #(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET), %sp + clr.l %sp@- + + /* Must disable global address */ + move.l #0xFC008000, %a1 + move.l #(CONFIG_SYS_CS0_BASE), (%a1) + move.l #0xFC008008, %a1 + move.l #(CONFIG_SYS_CS0_CTRL), (%a1) + move.l #0xFC008004, %a1 + move.l #(CONFIG_SYS_CS0_MASK), (%a1) + + /* + * Dram Initialization + * a1, a2, and d0 + */ + /* mscr sdram */ + move.l #0xFC0A4074, %a1 + move.b #(CONFIG_SYS_SDRAM_DRV_STRENGTH), (%a1) + nop + + /* SDRAM Chip 0 and 1 */ + move.l #0xFC0B8110, %a1 + move.l #0xFC0B8114, %a2 + + /* calculate the size */ + move.l #0x13, %d1 + move.l #(CONFIG_SYS_SDRAM_SIZE), %d2 +#ifdef CONFIG_SYS_SDRAM_BASE1 + lsr.l #1, %d2 +#endif + +dramsz_loop: + lsr.l #1, %d2 + add.l #1, %d1 + cmp.l #1, %d2 + bne dramsz_loop + + /* SDRAM Chip 0 and 1 */ + move.l #(CONFIG_SYS_SDRAM_BASE), (%a1) + or.l %d1, (%a1) +#ifdef CONFIG_SYS_SDRAM_BASE1 + move.l #(CONFIG_SYS_SDRAM_BASE1), (%a2) + or.l %d1, (%a2) +#endif + nop + + /* dram cfg1 and cfg2 */ + move.l #0xFC0B8008, %a1 + move.l #(CONFIG_SYS_SDRAM_CFG1), (%a1) + nop + move.l #0xFC0B800C, %a2 + move.l #(CONFIG_SYS_SDRAM_CFG2), (%a2) + nop + move.l #0xFC0B8000, %a1 /* Mode */ + move.l #0xFC0B8004, %a2 /* Ctrl */ + + /* Issue PALL */ + move.l #(CONFIG_SYS_SDRAM_CTRL + 2), (%a2) + nop + + /* Issue LEMR */ + move.l #(CONFIG_SYS_SDRAM_MODE), (%a1) + nop + move.l #(CONFIG_SYS_SDRAM_EMOD), (%a1) + nop + + move.l #1000, %d0 +wait1000: + nop + subq.l #1, %d0 + bne wait1000 + + /* Issue PALL */ + move.l #(CONFIG_SYS_SDRAM_CTRL + 2), (%a2) + nop + + /* Perform two refresh cycles */ + move.l #(CONFIG_SYS_SDRAM_CTRL + 4), %d0 + nop + move.l %d0, (%a2) + move.l %d0, (%a2) + nop + + move.l #(CONFIG_SYS_SDRAM_CTRL), %d0 + and.l #0x7FFFFFFF, %d0 + or.l #0x10000c00, %d0 + move.l %d0, (%a2) + nop + + /* + * DSPI Initialization + * a0 - general, sram - 0x80008000 - 32, see M52277EVB.h + * a1 - dspi status + * a2 - dtfr + * a3 - drfr + * a4 - Dst addr + */ + + /* Enable pins for DSPI mode - chip-selects are enabled later */ + move.l #0xFC0A4036, %a0 + move.b #0x3F, %d0 + move.b %d0, (%a0) + + /* DSPI CS */ +#ifdef CONFIG_SYS_DSPI_CS0 + move.b (%a0), %d0 + or.l #0xC0, %d0 + move.b %d0, (%a0) +#endif +#ifdef CONFIG_SYS_DSPI_CS2 + move.l #0xFC0A4037, %a0 + move.b (%a0), %d0 + or.l #0x10, %d0 + move.b %d0, (%a0) +#endif + nop + + /* Configure DSPI module */ + move.l #0xFC05C000, %a0 + move.l #0x80FF0C00, (%a0) /* Master, clear TX/RX FIFO */ + + move.l #0xFC05C00C, %a0 + move.l #0x3E000011, (%a0) + + move.l #0xFC05C034, %a2 /* dtfr */ + move.l #0xFC05C03B, %a3 /* drfr */ + + move.l #(ASM_SBF_IMG_HDR + 4), %a1 + move.l (%a1)+, %d5 + move.l (%a1), %a4 + + move.l #(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_SBFHDR_DATA_OFFSET), %a0 + move.l #(CONFIG_SYS_SBFHDR_SIZE), %d4 + + move.l #0xFC05C02C, %a1 /* dspi status */ + + /* Issue commands and address */ + move.l #0x8004000B, %d2 /* Fast Read Cmd */ + jsr asm_dspi_wr_status + jsr asm_dspi_rd_status + + move.l #0x80040000, %d2 /* Address byte 2 */ + jsr asm_dspi_wr_status + jsr asm_dspi_rd_status + + move.l #0x80040000, %d2 /* Address byte 1 */ + jsr asm_dspi_wr_status + jsr asm_dspi_rd_status + + move.l #0x80040000, %d2 /* Address byte 0 */ + jsr asm_dspi_wr_status + jsr asm_dspi_rd_status + + move.l #0x80040000, %d2 /* Dummy Wr and Rd */ + jsr asm_dspi_wr_status + jsr asm_dspi_rd_status + + /* Transfer serial boot header to sram */ +asm_dspi_rd_loop1: + move.l #0x80040000, %d2 + jsr asm_dspi_wr_status + jsr asm_dspi_rd_status + + move.b %d1, (%a0) /* read, copy to dst */ + + add.l #1, %a0 /* inc dst by 1 */ + sub.l #1, %d4 /* dec cnt by 1 */ + bne asm_dspi_rd_loop1 + + /* Transfer u-boot from serial flash to memory */ +asm_dspi_rd_loop2: + move.l #0x80040000, %d2 + jsr asm_dspi_wr_status + jsr asm_dspi_rd_status + + move.b %d1, (%a4) /* read, copy to dst */ + + add.l #1, %a4 /* inc dst by 1 */ + sub.l #1, %d5 /* dec cnt by 1 */ + bne asm_dspi_rd_loop2 + + move.l #0x00040000, %d2 /* Terminate */ + jsr asm_dspi_wr_status + jsr asm_dspi_rd_status + + /* jump to memory and execute */ + move.l #(TEXT_BASE + 0x400), %a0 + move.l %a0, (%a1) + jmp (%a0) + +asm_dspi_wr_status: + move.l (%a1), %d0 /* status */ + and.l #0x0000F000, %d0 + cmp.l #0x00003000, %d0 + bgt asm_dspi_wr_status + + move.l %d2, (%a2) + rts + +asm_dspi_rd_status: + move.l (%a1), %d0 /* status */ + and.l #0x000000F0, %d0 + lsr.l #4, %d0 + cmp.l #0, %d0 + beq asm_dspi_rd_status + + move.b (%a3), %d1 + rts +#endif /* CONFIG_CF_SBF */ + + .text + . = 0x400 .globl _start _start: nop @@ -132,11 +366,16 @@ _start: move.w #0x2700,%sr /* Mask off Interrupt */ /* Set vector base register at the beginning of the Flash */ +#if defined(CONFIG_CF_SBF) + move.l #TEXT_BASE, %d0 + movec %d0, %VBR +#else move.l #CONFIG_SYS_FLASH_BASE, %d0 movec %d0, %VBR move.l #(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_RAM_CTRL), %d0 movec %d0, %RAMBAR1 +#endif /* initialize general use internal ram */ move.l #0, %d0 diff --git a/cpu/mcf523x/cpu.c b/cpu/mcf523x/cpu.c index b9e48aa433..a1a51336c2 100644 --- a/cpu/mcf523x/cpu.c +++ b/cpu/mcf523x/cpu.c @@ -65,8 +65,8 @@ int checkcpu(void) printf("Freescale MCF%d (Mask:%01x Version:%x)\n", id, msk, ver); printf(" CPU CLK %s MHz BUS CLK %s MHz\n", - strmhz(buf1, gd->cpu_clk)), - strmhz(buf2, gd->bus_clk))); + strmhz(buf1, gd->cpu_clk), + strmhz(buf2, gd->bus_clk)); } return 0; diff --git a/cpu/mcf523x/cpu_init.c b/cpu/mcf523x/cpu_init.c index 652094485e..3c04fd4134 100644 --- a/cpu/mcf523x/cpu_init.c +++ b/cpu/mcf523x/cpu_init.c @@ -27,9 +27,14 @@ #include <common.h> #include <watchdog.h> - #include <asm/immap.h> +#if defined(CONFIG_CMD_NET) +#include <config.h> +#include <net.h> +#include <asm/fec.h> +#endif + /* * Breath some life into the CPU... * @@ -143,3 +148,20 @@ void uart_port_conf(void) break; } } + +#if defined(CONFIG_CMD_NET) +int fecpin_setclear(struct eth_device *dev, int setclear) +{ + volatile gpio_t *gpio = (gpio_t *) MMAP_GPIO; + + if (setclear) { + gpio->par_feci2c |= + (GPIO_PAR_FECI2C_EMDC_FECEMDC | GPIO_PAR_FECI2C_EMDIO_FECEMDIO); + } else { + gpio->par_feci2c &= + ~(GPIO_PAR_FECI2C_EMDC_MASK | GPIO_PAR_FECI2C_EMDIO_MASK); + } + + return 0; +} +#endif diff --git a/cpu/mcf52x2/cpu_init.c b/cpu/mcf52x2/cpu_init.c index 7bb358e63f..18308c8a7a 100644 --- a/cpu/mcf52x2/cpu_init.c +++ b/cpu/mcf52x2/cpu_init.c @@ -36,6 +36,71 @@ #include <watchdog.h> #include <asm/immap.h> +#if defined(CONFIG_CMD_NET) +#include <config.h> +#include <net.h> +#include <asm/fec.h> +#endif + +#ifndef CONFIG_M5272 +/* Only 5272 Flexbus chipselect is different from the rest */ +void init_fbcs(void) +{ + volatile fbcs_t *fbcs = (fbcs_t *) (MMAP_FBCS); + +#if (defined(CONFIG_SYS_CS0_BASE) && defined(CONFIG_SYS_CS0_MASK) \ + && defined(CONFIG_SYS_CS0_CTRL)) + fbcs->csar0 = CONFIG_SYS_CS0_BASE; + fbcs->cscr0 = CONFIG_SYS_CS0_CTRL; + fbcs->csmr0 = CONFIG_SYS_CS0_MASK; +#else +#warning "Chip Select 0 are not initialized/used" +#endif +#if (defined(CONFIG_SYS_CS1_BASE) && defined(CONFIG_SYS_CS1_MASK) \ + && defined(CONFIG_SYS_CS1_CTRL)) + fbcs->csar1 = CONFIG_SYS_CS1_BASE; + fbcs->cscr1 = CONFIG_SYS_CS1_CTRL; + fbcs->csmr1 = CONFIG_SYS_CS1_MASK; +#endif +#if (defined(CONFIG_SYS_CS2_BASE) && defined(CONFIG_SYS_CS2_MASK) \ + && defined(CONFIG_SYS_CS2_CTRL)) + fbcs->csar2 = CONFIG_SYS_CS2_BASE; + fbcs->cscr2 = CONFIG_SYS_CS2_CTRL; + fbcs->csmr2 = CONFIG_SYS_CS2_MASK; +#endif +#if (defined(CONFIG_SYS_CS3_BASE) && defined(CONFIG_SYS_CS3_MASK) \ + && defined(CONFIG_SYS_CS3_CTRL)) + fbcs->csar3 = CONFIG_SYS_CS3_BASE; + fbcs->cscr3 = CONFIG_SYS_CS3_CTRL; + fbcs->csmr3 = CONFIG_SYS_CS3_MASK; +#endif +#if (defined(CONFIG_SYS_CS4_BASE) && defined(CONFIG_SYS_CS4_MASK) \ + && defined(CONFIG_SYS_CS4_CTRL)) + fbcs->csar4 = CONFIG_SYS_CS4_BASE; + fbcs->cscr4 = CONFIG_SYS_CS4_CTRL; + fbcs->csmr4 = CONFIG_SYS_CS4_MASK; +#endif +#if (defined(CONFIG_SYS_CS5_BASE) && defined(CONFIG_SYS_CS5_MASK) \ + && defined(CONFIG_SYS_CS5_CTRL)) + fbcs->csar5 = CONFIG_SYS_CS5_BASE; + fbcs->cscr5 = CONFIG_SYS_CS5_CTRL; + fbcs->csmr5 = CONFIG_SYS_CS5_MASK; +#endif +#if (defined(CONFIG_SYS_CS6_BASE) && defined(CONFIG_SYS_CS6_MASK) \ + && defined(CONFIG_SYS_CS6_CTRL)) + fbcs->csar6 = CONFIG_SYS_CS6_BASE; + fbcs->cscr6 = CONFIG_SYS_CS6_CTRL; + fbcs->csmr6 = CONFIG_SYS_CS6_MASK; +#endif +#if (defined(CONFIG_SYS_CS7_BASE) && defined(CONFIG_SYS_CS7_MASK) \ + && defined(CONFIG_SYS_CS7_CTRL)) + fbcs->csar7 = CONFIG_SYS_CS7_BASE; + fbcs->cscr7 = CONFIG_SYS_CS7_CTRL; + fbcs->csmr7 = CONFIG_SYS_CS7_MASK; +#endif +} +#endif + #if defined(CONFIG_M5253) /* * Breath some life into the CPU... @@ -66,22 +131,14 @@ void cpu_init_f(void) mbar2_writeByte(MCFSIM_INTBASE, 0x40); /* Base interrupts at 64 */ mbar2_writeByte(MCFSIM_SPURVEC, 0x00); - /*mbar2_writeLong(MCFSIM_IDECONFIG1, 0x00000020); */ /* Enable a 1 cycle pre-drive cycle on CS1 */ - - /* - * Setup chip selects... - */ - - mbar_writeShort(MCFSIM_CSAR1, CONFIG_SYS_CSAR1); - mbar_writeShort(MCFSIM_CSCR1, CONFIG_SYS_CSCR1); - mbar_writeLong(MCFSIM_CSMR1, CONFIG_SYS_CSMR1); + /*mbar2_writeLong(MCFSIM_IDECONFIG1, 0x00000020); *//* Enable a 1 cycle pre-drive cycle on CS1 */ - mbar_writeShort(MCFSIM_CSAR0, CONFIG_SYS_CSAR0); - mbar_writeShort(MCFSIM_CSCR0, CONFIG_SYS_CSCR0); - mbar_writeLong(MCFSIM_CSMR0, CONFIG_SYS_CSMR0); + /* FlexBus Chipselect */ + init_fbcs(); #ifdef CONFIG_FSL_I2C - CONFIG_SYS_I2C_PINMUX_REG = CONFIG_SYS_I2C_PINMUX_REG & CONFIG_SYS_I2C_PINMUX_CLR; + CONFIG_SYS_I2C_PINMUX_REG = + CONFIG_SYS_I2C_PINMUX_REG & CONFIG_SYS_I2C_PINMUX_CLR; CONFIG_SYS_I2C_PINMUX_REG |= CONFIG_SYS_I2C_PINMUX_SET; #ifdef CONFIG_SYS_I2C2_OFFSET CONFIG_SYS_I2C2_PINMUX_REG &= CONFIG_SYS_I2C2_PINMUX_CLR; @@ -121,6 +178,9 @@ void cpu_init_f(void) mbar_writeShort(MCF_WTM_WCR, 0); #endif + /* FlexBus Chipselect */ + init_fbcs(); + /* Set clockspeed to 100MHz */ mbar_writeShort(MCF_FMPLL_SYNCR, MCF_FMPLL_SYNCR_MFD(0) | MCF_FMPLL_SYNCR_RFD(0)); @@ -153,6 +213,19 @@ void uart_port_conf(void) break; } } + +#if defined(CONFIG_CMD_NET) +int fecpin_setclear(struct eth_device *dev, int setclear) +{ + if (setclear) { + /* Enable Ethernet pins */ + mbar_writeByte(MCF_GPIO_PAR_FECI2C, CONFIG_SYS_FECI2C); + } else { + } + + return 0; +} +#endif /* CONFIG_CMD_NET */ #endif #if defined(CONFIG_M5272) @@ -255,6 +328,22 @@ void uart_port_conf(void) break; } } + +#if defined(CONFIG_CMD_NET) +int fecpin_setclear(struct eth_device *dev, int setclear) +{ + volatile gpio_t *gpio = (gpio_t *) MMAP_GPIO; + + if (setclear) { + gpio->gpio_pbcnt |= GPIO_PBCNT_E_MDC | GPIO_PBCNT_E_RXER | + GPIO_PBCNT_E_RXD1 | GPIO_PBCNT_E_RXD2 | + GPIO_PBCNT_E_RXD3 | GPIO_PBCNT_E_TXD1 | + GPIO_PBCNT_E_TXD2 | GPIO_PBCNT_E_TXD3; + } else { + } + return 0; +} +#endif /* CONFIG_CMD_NET */ #endif /* #if defined(CONFIG_M5272) */ #if defined(CONFIG_M5275) @@ -268,66 +357,20 @@ void uart_port_conf(void) */ void cpu_init_f(void) { - /* if we come from RAM we assume the CPU is + /* + * if we come from RAM we assume the CPU is * already initialized. */ #ifndef CONFIG_MONITOR_IS_IN_RAM - volatile wdog_t *wdog_reg = (wdog_t *)(MMAP_WDOG); - volatile gpio_t *gpio_reg = (gpio_t *)(MMAP_GPIO); - volatile csctrl_t *csctrl_reg = (csctrl_t *)(MMAP_FBCS); + volatile wdog_t *wdog_reg = (wdog_t *) (MMAP_WDOG); + volatile gpio_t *gpio_reg = (gpio_t *) (MMAP_GPIO); /* Kill watchdog so we can initialize the PLL */ wdog_reg->wcr = 0; - /* Memory Controller: */ - /* Flash */ - csctrl_reg->ar0 = CONFIG_SYS_AR0_PRELIM; - csctrl_reg->cr0 = CONFIG_SYS_CR0_PRELIM; - csctrl_reg->mr0 = CONFIG_SYS_MR0_PRELIM; - -#if (defined(CONFIG_SYS_AR1_PRELIM) && defined(CONFIG_SYS_CR1_PRELIM) && defined(CONFIG_SYS_MR1_PRELIM)) - csctrl_reg->ar1 = CONFIG_SYS_AR1_PRELIM; - csctrl_reg->cr1 = CONFIG_SYS_CR1_PRELIM; - csctrl_reg->mr1 = CONFIG_SYS_MR1_PRELIM; -#endif - -#if (defined(CONFIG_SYS_AR2_PRELIM) && defined(CONFIG_SYS_CR2_PRELIM) && defined(CONFIG_SYS_MR2_PRELIM)) - csctrl_reg->ar2 = CONFIG_SYS_AR2_PRELIM; - csctrl_reg->cr2 = CONFIG_SYS_CR2_PRELIM; - csctrl_reg->mr2 = CONFIG_SYS_MR2_PRELIM; -#endif - -#if (defined(CONFIG_SYS_AR3_PRELIM) && defined(CONFIG_SYS_CR3_PRELIM) && defined(CONFIG_SYS_MR3_PRELIM)) - csctrl_reg->ar3 = CONFIG_SYS_AR3_PRELIM; - csctrl_reg->cr3 = CONFIG_SYS_CR3_PRELIM; - csctrl_reg->mr3 = CONFIG_SYS_MR3_PRELIM; -#endif - -#if (defined(CONFIG_SYS_AR4_PRELIM) && defined(CONFIG_SYS_CR4_PRELIM) && defined(CONFIG_SYS_MR4_PRELIM)) - csctrl_reg->ar4 = CONFIG_SYS_AR4_PRELIM; - csctrl_reg->cr4 = CONFIG_SYS_CR4_PRELIM; - csctrl_reg->mr4 = CONFIG_SYS_MR4_PRELIM; -#endif - -#if (defined(CONFIG_SYS_AR5_PRELIM) && defined(CONFIG_SYS_CR5_PRELIM) && defined(CONFIG_SYS_MR5_PRELIM)) - csctrl_reg->ar5 = CONFIG_SYS_AR5_PRELIM; - csctrl_reg->cr5 = CONFIG_SYS_CR5_PRELIM; - csctrl_reg->mr5 = CONFIG_SYS_MR5_PRELIM; -#endif - -#if (defined(CONFIG_SYS_AR6_PRELIM) && defined(CONFIG_SYS_CR6_PRELIM) && defined(CONFIG_SYS_MR6_PRELIM)) - csctrl_reg->ar6 = CONFIG_SYS_AR6_PRELIM; - csctrl_reg->cr6 = CONFIG_SYS_CR6_PRELIM; - csctrl_reg->mr6 = CONFIG_SYS_MR6_PRELIM; -#endif - -#if (defined(CONFIG_SYS_AR7_PRELIM) && defined(CONFIG_SYS_CR7_PRELIM) && defined(CONFIG_SYS_MR7_PRELIM)) - csctrl_reg->ar7 = CONFIG_SYS_AR7_PRELIM; - csctrl_reg->cr7 = CONFIG_SYS_CR7_PRELIM; - csctrl_reg->mr7 = CONFIG_SYS_MR7_PRELIM; -#endif - + /* FlexBus Chipselect */ + init_fbcs(); #endif /* #ifndef CONFIG_MONITOR_IS_IN_RAM */ #ifdef CONFIG_FSL_I2C @@ -349,7 +392,7 @@ int cpu_init_r(void) void uart_port_conf(void) { - volatile gpio_t *gpio = (gpio_t *)MMAP_GPIO; + volatile gpio_t *gpio = (gpio_t *) MMAP_GPIO; /* Setup Ports: */ switch (CONFIG_SYS_UART_PORT) { @@ -364,6 +407,35 @@ void uart_port_conf(void) break; } } + +#if defined(CONFIG_CMD_NET) +int fecpin_setclear(struct eth_device *dev, int setclear) +{ + struct fec_info_s *info = (struct fec_info_s *) dev->priv; + volatile gpio_t *gpio = (gpio_t *)MMAP_GPIO; + + if (setclear) { + /* Enable Ethernet pins */ + if (info->iobase == CONFIG_SYS_FEC0_IOBASE) { + gpio->par_feci2c |= 0x0F00; + gpio->par_fec0hl |= 0xC0; + } else { + gpio->par_feci2c |= 0x00A0; + gpio->par_fec1hl |= 0xC0; + } + } else { + if (info->iobase == CONFIG_SYS_FEC0_IOBASE) { + gpio->par_feci2c &= ~0x0F00; + gpio->par_fec0hl &= ~0xC0; + } else { + gpio->par_feci2c &= ~0x00A0; + gpio->par_fec1hl &= ~0xC0; + } + } + + return 0; +} +#endif /* CONFIG_CMD_NET */ #endif /* #if defined(CONFIG_M5275) */ #if defined(CONFIG_M5282) @@ -384,7 +456,8 @@ void cpu_init_f(void) #ifndef CONFIG_MONITOR_IS_IN_RAM /* Set speed /PLL */ MCFCLOCK_SYNCR = - MCFCLOCK_SYNCR_MFD(CONFIG_SYS_MFD) | MCFCLOCK_SYNCR_RFD(CONFIG_SYS_RFD); + MCFCLOCK_SYNCR_MFD(CONFIG_SYS_MFD) | + MCFCLOCK_SYNCR_RFD(CONFIG_SYS_RFD); while (!(MCFCLOCK_SYNSR & MCFCLOCK_SYNSR_LOCK)) ; MCFGPIO_PBCDPAR = 0xc0; @@ -425,119 +498,8 @@ void cpu_init_f(void) MCFGPIO_DDRUA = CONFIG_SYS_DDRUA; #endif - /* This is probably a bad place to setup chip selects, but everyone - else is doing it! */ - -#if defined(CONFIG_SYS_CS0_BASE) & defined(CONFIG_SYS_CS0_SIZE) & \ - defined(CONFIG_SYS_CS0_WIDTH) & defined(CONFIG_SYS_CS0_WS) - - MCFCSM_CSAR0 = (CONFIG_SYS_CS0_BASE >> 16) & 0xFFFF; - -#if (CONFIG_SYS_CS0_WIDTH == 8) -#define CONFIG_SYS_CS0_PS MCFCSM_CSCR_PS_8 -#elif (CONFIG_SYS_CS0_WIDTH == 16) -#define CONFIG_SYS_CS0_PS MCFCSM_CSCR_PS_16 -#elif (CONFIG_SYS_CS0_WIDTH == 32) -#define CONFIG_SYS_CS0_PS MCFCSM_CSCR_PS_32 -#else -#error "CONFIG_SYS_CS0_WIDTH: Fault - wrong bus with for CS0" -#endif - MCFCSM_CSCR0 = MCFCSM_CSCR_WS(CONFIG_SYS_CS0_WS) - | CONFIG_SYS_CS0_PS | MCFCSM_CSCR_AA; - -#if (CONFIG_SYS_CS0_RO != 0) - MCFCSM_CSMR0 = MCFCSM_CSMR_BAM(CONFIG_SYS_CS0_SIZE - 1) - | MCFCSM_CSMR_WP | MCFCSM_CSMR_V; -#else - MCFCSM_CSMR0 = MCFCSM_CSMR_BAM(CONFIG_SYS_CS0_SIZE - 1) | MCFCSM_CSMR_V; -#endif -#else -#warning "Chip Select 0 are not initialized/used" -#endif - -#if defined(CONFIG_SYS_CS1_BASE) & defined(CONFIG_SYS_CS1_SIZE) & \ - defined(CONFIG_SYS_CS1_WIDTH) & defined(CONFIG_SYS_CS1_WS) - - MCFCSM_CSAR1 = (CONFIG_SYS_CS1_BASE >> 16) & 0xFFFF; - -#if (CONFIG_SYS_CS1_WIDTH == 8) -#define CONFIG_SYS_CS1_PS MCFCSM_CSCR_PS_8 -#elif (CONFIG_SYS_CS1_WIDTH == 16) -#define CONFIG_SYS_CS1_PS MCFCSM_CSCR_PS_16 -#elif (CONFIG_SYS_CS1_WIDTH == 32) -#define CONFIG_SYS_CS1_PS MCFCSM_CSCR_PS_32 -#else -#error "CONFIG_SYS_CS1_WIDTH: Fault - wrong bus with for CS1" -#endif - MCFCSM_CSCR1 = MCFCSM_CSCR_WS(CONFIG_SYS_CS1_WS) - | CONFIG_SYS_CS1_PS | MCFCSM_CSCR_AA; - -#if (CONFIG_SYS_CS1_RO != 0) - MCFCSM_CSMR1 = MCFCSM_CSMR_BAM(CONFIG_SYS_CS1_SIZE - 1) - | MCFCSM_CSMR_WP | MCFCSM_CSMR_V; -#else - MCFCSM_CSMR1 = MCFCSM_CSMR_BAM(CONFIG_SYS_CS1_SIZE - 1) - | MCFCSM_CSMR_V; -#endif -#else -#warning "Chip Select 1 are not initialized/used" -#endif - -#if defined(CONFIG_SYS_CS2_BASE) & defined(CONFIG_SYS_CS2_SIZE) & \ - defined(CONFIG_SYS_CS2_WIDTH) & defined(CONFIG_SYS_CS2_WS) - - MCFCSM_CSAR2 = (CONFIG_SYS_CS2_BASE >> 16) & 0xFFFF; - -#if (CONFIG_SYS_CS2_WIDTH == 8) -#define CONFIG_SYS_CS2_PS MCFCSM_CSCR_PS_8 -#elif (CONFIG_SYS_CS2_WIDTH == 16) -#define CONFIG_SYS_CS2_PS MCFCSM_CSCR_PS_16 -#elif (CONFIG_SYS_CS2_WIDTH == 32) -#define CONFIG_SYS_CS2_PS MCFCSM_CSCR_PS_32 -#else -#error "CONFIG_SYS_CS2_WIDTH: Fault - wrong bus with for CS2" -#endif - MCFCSM_CSCR2 = MCFCSM_CSCR_WS(CONFIG_SYS_CS2_WS) - | CONFIG_SYS_CS2_PS | MCFCSM_CSCR_AA; - -#if (CONFIG_SYS_CS2_RO != 0) - MCFCSM_CSMR2 = MCFCSM_CSMR_BAM(CONFIG_SYS_CS2_SIZE - 1) - | MCFCSM_CSMR_WP | MCFCSM_CSMR_V; -#else - MCFCSM_CSMR2 = MCFCSM_CSMR_BAM(CONFIG_SYS_CS2_SIZE - 1) - | MCFCSM_CSMR_V; -#endif -#else -#warning "Chip Select 2 are not initialized/used" -#endif - -#if defined(CONFIG_SYS_CS3_BASE) & defined(CONFIG_SYS_CS3_SIZE) & \ - defined(CONFIG_SYS_CS3_WIDTH) & defined(CONFIG_SYS_CS3_WS) - - MCFCSM_CSAR3 = (CONFIG_SYS_CS3_BASE >> 16) & 0xFFFF; - -#if (CONFIG_SYS_CS3_WIDTH == 8) -#define CONFIG_SYS_CS3_PS MCFCSM_CSCR_PS_8 -#elif (CONFIG_SYS_CS3_WIDTH == 16) -#define CONFIG_SYS_CS3_PS MCFCSM_CSCR_PS_16 -#elif (CONFIG_SYS_CS3_WIDTH == 32) -#define CONFIG_SYS_CS3_PS MCFCSM_CSCR_PS_32 -#else -#error "CONFIG_SYS_CS3_WIDTH: Fault - wrong bus with for CS1" -#endif - MCFCSM_CSCR3 = MCFCSM_CSCR_WS(CONFIG_SYS_CS3_WS) - | CONFIG_SYS_CS3_PS | MCFCSM_CSCR_AA; - -#if (CONFIG_SYS_CS3_RO != 0) - MCFCSM_CSMR3 = MCFCSM_CSMR_BAM(CONFIG_SYS_CS3_SIZE - 1) - | MCFCSM_CSMR_WP | MCFCSM_CSMR_V; -#else - MCFCSM_CSMR3 = MCFCSM_CSMR_BAM(CONFIG_SYS_CS3_SIZE - 1) - | MCFCSM_CSMR_V; -#endif -#else -#warning "Chip Select 3 are not initialized/used" -#endif + /* FlexBus Chipselect */ + init_fbcs(); #endif /* CONFIG_MONITOR_IS_IN_RAM */ @@ -571,6 +533,20 @@ void uart_port_conf(void) break; } } + +#if defined(CONFIG_CMD_NET) +int fecpin_setclear(struct eth_device *dev, int setclear) +{ + if (setclear) { + MCFGPIO_PASPAR |= 0x0F00; + MCFGPIO_PEHLPAR = CONFIG_SYS_PEHLPAR; + } else { + MCFGPIO_PASPAR &= 0xF0FF; + MCFGPIO_PEHLPAR &= ~CONFIG_SYS_PEHLPAR; + } + return 0; +} +#endif /* CONFIG_CMD_NET */ #endif #if defined(CONFIG_M5249) @@ -632,17 +608,8 @@ void cpu_init_f(void) mbar2_writeLong(MCFSIM_IDECONFIG1, 0x00000020); mbar2_writeLong(MCFSIM_IDECONFIG2, 0x00000000); - /* - * Setup chip selects... - */ - - mbar_writeShort(MCFSIM_CSAR1, CONFIG_SYS_CSAR1); - mbar_writeShort(MCFSIM_CSCR1, CONFIG_SYS_CSCR1); - mbar_writeLong(MCFSIM_CSMR1, CONFIG_SYS_CSMR1); - - mbar_writeShort(MCFSIM_CSAR0, CONFIG_SYS_CSAR0); - mbar_writeShort(MCFSIM_CSCR0, CONFIG_SYS_CSCR0); - mbar_writeLong(MCFSIM_CSMR0, CONFIG_SYS_CSMR0); + /* FlexBus Chipselect */ + init_fbcs(); /* enable instruction cache now */ icache_enable(); diff --git a/cpu/mcf532x/cpu.c b/cpu/mcf532x/cpu.c index fd77939f24..331cc15da4 100644 --- a/cpu/mcf532x/cpu.c +++ b/cpu/mcf532x/cpu.c @@ -3,7 +3,7 @@ * (C) Copyright 2000-2003 * Wolfgang Denk, DENX Software Engineering, wd@denx.de. * - * Copyright (C) 2004-2007 Freescale Semiconductor, Inc. + * Copyright (C) 2004-2008 Freescale Semiconductor, Inc. * TsiChung Liew (Tsi-Chung.Liew@freescale.com) * * See file CREDITS for list of people who contributed to this @@ -56,6 +56,24 @@ int checkcpu(void) msk = (ccm->cir >> 6); ver = (ccm->cir & 0x003f); switch (msk) { +#ifdef CONFIG_MCF5301x + case 0x78: + id = 53010; + break; + case 0x77: + id = 53012; + break; + case 0x76: + id = 53015; + break; + case 0x74: + id = 53011; + break; + case 0x73: + id = 53013; + break; +#endif +#ifdef CONFIG_MCF532x case 0x54: id = 5329; break; @@ -77,6 +95,7 @@ int checkcpu(void) case 0x6B: id = 5372; break; +#endif } if (id) { @@ -85,8 +104,8 @@ int checkcpu(void) printf("Freescale MCF%d (Mask:%01x Version:%x)\n", id, msk, ver); printf(" CPU CLK %s MHz BUS CLK %s MHz\n", - strmhz(buf1, gd->cpu_clk)), - strmhz(buf2, gd->bus_clk))); + strmhz(buf1, gd->cpu_clk), + strmhz(buf2, gd->bus_clk)); } return 0; diff --git a/cpu/mcf532x/cpu_init.c b/cpu/mcf532x/cpu_init.c index d348e29a1f..687c7e42ec 100644 --- a/cpu/mcf532x/cpu_init.c +++ b/cpu/mcf532x/cpu_init.c @@ -3,7 +3,7 @@ * (C) Copyright 2000-2003 * Wolfgang Denk, DENX Software Engineering, wd@denx.de. * - * (C) Copyright 2007 Freescale Semiconductor, Inc. + * (C) Copyright 2004-2008 Freescale Semiconductor, Inc. * TsiChung Liew (Tsi-Chung.Liew@freescale.com) * * See file CREDITS for list of people who contributed to this @@ -27,16 +27,188 @@ #include <common.h> #include <watchdog.h> - #include <asm/immap.h> -/* - * Breath some life into the CPU... - * - * Set up the memory map, - * initialize a bunch of registers, - * initialize the UPM's - */ +#if defined(CONFIG_CMD_NET) +#include <config.h> +#include <net.h> +#include <asm/fec.h> +#endif + +#ifdef CONFIG_MCF5301x +void cpu_init_f(void) +{ + volatile scm1_t *scm1 = (scm1_t *) MMAP_SCM1; + volatile scm2_t *scm2 = (scm2_t *) MMAP_SCM2; + volatile gpio_t *gpio = (gpio_t *) MMAP_GPIO; + volatile fbcs_t *fbcs = (fbcs_t *) MMAP_FBCS; + + /* watchdog is enabled by default - disable the watchdog */ +#ifndef CONFIG_WATCHDOG + /*wdog->cr = 0; */ +#endif + + scm1->mpr = 0x77777777; + scm1->pacra = 0; + scm1->pacrb = 0; + scm1->pacrc = 0; + scm1->pacrd = 0; + scm1->pacre = 0; + scm1->pacrf = 0; + scm1->pacrg = 0; + +#if (defined(CONFIG_SYS_CS0_BASE) && defined(CONFIG_SYS_CS0_MASK) \ + && defined(CONFIG_SYS_CS0_CTRL)) + gpio->par_cs |= GPIO_PAR_CS0_CS0; + fbcs->csar0 = CONFIG_SYS_CS0_BASE; + fbcs->cscr0 = CONFIG_SYS_CS0_CTRL; + fbcs->csmr0 = CONFIG_SYS_CS0_MASK; +#endif + +#if (defined(CONFIG_SYS_CS1_BASE) && defined(CONFIG_SYS_CS1_MASK) \ + && defined(CONFIG_SYS_CS1_CTRL)) + gpio->par_cs |= GPIO_PAR_CS1_CS1; + fbcs->csar1 = CONFIG_SYS_CS1_BASE; + fbcs->cscr1 = CONFIG_SYS_CS1_CTRL; + fbcs->csmr1 = CONFIG_SYS_CS1_MASK; +#endif + +#if (defined(CONFIG_SYS_CS2_BASE) && defined(CONFIG_SYS_CS2_MASK) \ + && defined(CONFIG_SYS_CS2_CTRL)) + fbcs->csar2 = CONFIG_SYS_CS2_BASE; + fbcs->cscr2 = CONFIG_SYS_CS2_CTRL; + fbcs->csmr2 = CONFIG_SYS_CS2_MASK; +#endif + +#if (defined(CONFIG_SYS_CS3_BASE) && defined(CONFIG_SYS_CS3_MASK) \ + && defined(CONFIG_SYS_CS3_CTRL)) + fbcs->csar3 = CONFIG_SYS_CS3_BASE; + fbcs->cscr3 = CONFIG_SYS_CS3_CTRL; + fbcs->csmr3 = CONFIG_SYS_CS3_MASK; +#endif + +#if (defined(CONFIG_SYS_CS4_BASE) && defined(CONFIG_SYS_CS4_MASK) \ + && defined(CONFIG_SYS_CS4_CTRL)) + gpio->par_cs |= GPIO_PAR_CS4; + fbcs->csar4 = CONFIG_SYS_CS4_BASE; + fbcs->cscr4 = CONFIG_SYS_CS4_CTRL; + fbcs->csmr4 = CONFIG_SYS_CS4_MASK; +#endif + +#if (defined(CONFIG_SYS_CS5_BASE) && defined(CONFIG_SYS_CS5_MASK) \ + && defined(CONFIG_SYS_CS5_CTRL)) + gpio->par_cs |= GPIO_PAR_CS5; + fbcs->csar5 = CONFIG_SYS_CS5_BASE; + fbcs->cscr5 = CONFIG_SYS_CS5_CTRL; + fbcs->csmr5 = CONFIG_SYS_CS5_MASK; +#endif + +#ifdef CONFIG_FSL_I2C + gpio->par_feci2c = GPIO_PAR_FECI2C_SDA_SDA | GPIO_PAR_FECI2C_SCL_SCL; +#endif + + icache_enable(); +} + +/* initialize higher level parts of CPU like timers */ +int cpu_init_r(void) +{ +#ifdef CONFIG_MCFFEC + volatile ccm_t *ccm = (ccm_t *) MMAP_CCM; +#endif +#ifdef CONFIG_MCFRTC + volatile rtc_t *rtc = (rtc_t *) (CONFIG_SYS_MCFRTC_BASE); + volatile rtcex_t *rtcex = (rtcex_t *) & rtc->extended; + + rtcex->gocu = CONFIG_SYS_RTC_CNT; + rtcex->gocl = CONFIG_SYS_RTC_SETUP; + +#endif +#ifdef CONFIG_MCFFEC + if (CONFIG_SYS_FEC0_MIIBASE != CONFIG_SYS_FEC1_MIIBASE) + ccm->misccr |= CCM_MISCCR_FECM; + else + ccm->misccr &= ~CCM_MISCCR_FECM; +#endif + + return (0); +} + +void uart_port_conf(void) +{ + volatile gpio_t *gpio = (gpio_t *) MMAP_GPIO; + + /* Setup Ports: */ + switch (CONFIG_SYS_UART_PORT) { + case 0: + gpio->par_uart = (GPIO_PAR_UART_U0TXD | GPIO_PAR_UART_U0RXD); + break; + case 1: +#ifdef CONFIG_SYS_UART1_ALT1_GPIO + gpio->par_simp1h &= + ~(GPIO_PAR_SIMP1H_DATA1_MASK | GPIO_PAR_SIMP1H_VEN1_MASK); + gpio->par_simp1h |= + (GPIO_PAR_SIMP1H_DATA1_U1TXD | GPIO_PAR_SIMP1H_VEN1_U1RXD); +#elif defined(CONFIG_SYS_UART1_ALT2_GPIO) + gpio->par_ssih &= + ~(GPIO_PAR_SSIH_RXD_MASK | GPIO_PAR_SSIH_TXD_MASK); + gpio->par_ssih |= + (GPIO_PAR_SSIH_RXD_U1RXD | GPIO_PAR_SSIH_TXD_U1TXD); +#endif + break; + case 2: +#ifdef CONFIG_SYS_UART2_PRI_GPIO + gpio->par_uart |= (GPIO_PAR_UART_U2TXD | GPIO_PAR_UART_U2RXD); +#elif defined(CONFIG_SYS_UART2_ALT1_GPIO) + gpio->par_dspih &= + ~(GPIO_PAR_DSPIH_SIN_MASK | GPIO_PAR_DSPIH_SOUT_MASK); + gpio->par_dspih |= + (GPIO_PAR_DSPIH_SIN_U2RXD | GPIO_PAR_DSPIH_SOUT_U2TXD); +#elif defined(CONFIG_SYS_UART2_ALT2_GPIO) + gpio->par_feci2c &= + ~(GPIO_PAR_FECI2C_SDA_MASK | GPIO_PAR_FECI2C_SCL_MASK); + gpio->par_feci2c |= + (GPIO_PAR_FECI2C_SDA_U2TXD | GPIO_PAR_FECI2C_SCL_U2RXD); +#endif + break; + } +} + +#if defined(CONFIG_CMD_NET) +int fecpin_setclear(struct eth_device *dev, int setclear) +{ + volatile gpio_t *gpio = (gpio_t *) MMAP_GPIO; + struct fec_info_s *info = (struct fec_info_s *)dev->priv; + + if (setclear) { + if (info->iobase == CONFIG_SYS_FEC0_IOBASE) { + gpio->par_fec |= + GPIO_PAR_FEC0_7W_FEC | GPIO_PAR_FEC0_RMII_FEC; + gpio->par_feci2c |= + GPIO_PAR_FECI2C_MDC0 | GPIO_PAR_FECI2C_MDIO0; + } else { + gpio->par_fec |= + GPIO_PAR_FEC1_7W_FEC | GPIO_PAR_FEC1_RMII_FEC; + gpio->par_feci2c |= + GPIO_PAR_FECI2C_MDC1 | GPIO_PAR_FECI2C_MDIO1; + } + } else { + if (info->iobase == CONFIG_SYS_FEC0_IOBASE) { + gpio->par_fec &= + ~(GPIO_PAR_FEC0_7W_FEC | GPIO_PAR_FEC0_RMII_FEC); + gpio->par_feci2c &= GPIO_PAR_FECI2C_RMII0_MASK; + } else { + gpio->par_fec &= + ~(GPIO_PAR_FEC1_7W_FEC | GPIO_PAR_FEC1_RMII_FEC); + gpio->par_feci2c &= GPIO_PAR_FECI2C_RMII1_MASK; + } + } + return 0; +} +#endif /* CONFIG_CMD_NET */ +#endif /* CONFIG_MCF5301x */ + +#ifdef CONFIG_MCF532x void cpu_init_f(void) { volatile scm1_t *scm1 = (scm1_t *) MMAP_SCM1; @@ -63,13 +235,15 @@ void cpu_init_f(void) /* Port configuration */ gpio->par_cs = 0; -#if (defined(CONFIG_SYS_CS0_BASE) && defined(CONFIG_SYS_CS0_MASK) && defined(CONFIG_SYS_CS0_CTRL)) +#if (defined(CONFIG_SYS_CS0_BASE) && defined(CONFIG_SYS_CS0_MASK) \ + && defined(CONFIG_SYS_CS0_CTRL)) fbcs->csar0 = CONFIG_SYS_CS0_BASE; fbcs->cscr0 = CONFIG_SYS_CS0_CTRL; fbcs->csmr0 = CONFIG_SYS_CS0_MASK; #endif -#if (defined(CONFIG_SYS_CS1_BASE) && defined(CONFIG_SYS_CS1_MASK) && defined(CONFIG_SYS_CS1_CTRL)) +#if (defined(CONFIG_SYS_CS1_BASE) && defined(CONFIG_SYS_CS1_MASK) \ + && defined(CONFIG_SYS_CS1_CTRL)) /* Latch chipselect */ gpio->par_cs |= GPIO_PAR_CS1; fbcs->csar1 = CONFIG_SYS_CS1_BASE; @@ -77,28 +251,32 @@ void cpu_init_f(void) fbcs->csmr1 = CONFIG_SYS_CS1_MASK; #endif -#if (defined(CONFIG_SYS_CS2_BASE) && defined(CONFIG_SYS_CS2_MASK) && defined(CONFIG_SYS_CS2_CTRL)) +#if (defined(CONFIG_SYS_CS2_BASE) && defined(CONFIG_SYS_CS2_MASK) \ + && defined(CONFIG_SYS_CS2_CTRL)) gpio->par_cs |= GPIO_PAR_CS2; fbcs->csar2 = CONFIG_SYS_CS2_BASE; fbcs->cscr2 = CONFIG_SYS_CS2_CTRL; fbcs->csmr2 = CONFIG_SYS_CS2_MASK; #endif -#if (defined(CONFIG_SYS_CS3_BASE) && defined(CONFIG_SYS_CS3_MASK) && defined(CONFIG_SYS_CS3_CTRL)) +#if (defined(CONFIG_SYS_CS3_BASE) && defined(CONFIG_SYS_CS3_MASK) \ + && defined(CONFIG_SYS_CS3_CTRL)) gpio->par_cs |= GPIO_PAR_CS3; fbcs->csar3 = CONFIG_SYS_CS3_BASE; fbcs->cscr3 = CONFIG_SYS_CS3_CTRL; fbcs->csmr3 = CONFIG_SYS_CS3_MASK; #endif -#if (defined(CONFIG_SYS_CS4_BASE) && defined(CONFIG_SYS_CS4_MASK) && defined(CONFIG_SYS_CS4_CTRL)) +#if (defined(CONFIG_SYS_CS4_BASE) && defined(CONFIG_SYS_CS4_MASK) \ + && defined(CONFIG_SYS_CS4_CTRL)) gpio->par_cs |= GPIO_PAR_CS4; fbcs->csar4 = CONFIG_SYS_CS4_BASE; fbcs->cscr4 = CONFIG_SYS_CS4_CTRL; fbcs->csmr4 = CONFIG_SYS_CS4_MASK; #endif -#if (defined(CONFIG_SYS_CS5_BASE) && defined(CONFIG_SYS_CS5_MASK) && defined(CONFIG_SYS_CS5_CTRL)) +#if (defined(CONFIG_SYS_CS5_BASE) && defined(CONFIG_SYS_CS5_MASK) \ + && defined(CONFIG_SYS_CS5_CTRL)) gpio->par_cs |= GPIO_PAR_CS5; fbcs->csar5 = CONFIG_SYS_CS5_BASE; fbcs->cscr5 = CONFIG_SYS_CS5_CTRL; @@ -139,3 +317,22 @@ void uart_port_conf(void) break; } } + +#if defined(CONFIG_CMD_NET) +int fecpin_setclear(struct eth_device *dev, int setclear) +{ + volatile gpio_t *gpio = (gpio_t *) MMAP_GPIO; + + if (setclear) { + gpio->par_fec |= GPIO_PAR_FEC_7W_FEC | GPIO_PAR_FEC_MII_FEC; + gpio->par_feci2c |= + GPIO_PAR_FECI2C_MDC_EMDC | GPIO_PAR_FECI2C_MDIO_EMDIO; + } else { + gpio->par_fec &= ~(GPIO_PAR_FEC_7W_FEC | GPIO_PAR_FEC_MII_FEC); + gpio->par_feci2c &= + ~(GPIO_PAR_FECI2C_MDC_EMDC | GPIO_PAR_FECI2C_MDIO_EMDIO); + } + return 0; +} +#endif +#endif /* CONFIG_MCF532x */ diff --git a/cpu/mcf532x/speed.c b/cpu/mcf532x/speed.c index 1e40374d09..0d378e63d4 100644 --- a/cpu/mcf532x/speed.c +++ b/cpu/mcf532x/speed.c @@ -3,7 +3,7 @@ * (C) Copyright 2000-2003 * Wolfgang Denk, DENX Software Engineering, wd@denx.de. * - * Copyright (C) 2004-2007 Freescale Semiconductor, Inc. + * Copyright (C) 2004-2008 Freescale Semiconductor, Inc. * TsiChung Liew (Tsi-Chung.Liew@freescale.com) * * See file CREDITS for list of people who contributed to this @@ -36,26 +36,33 @@ DECLARE_GLOBAL_DATA_PTR; #define MAX_FVCO 500000 /* KHz */ #define MAX_FSYS 80000 /* KHz */ #define MIN_FSYS 58333 /* KHz */ + +#ifdef CONFIG_MCF5301x +#define FREF 20000 /* KHz */ +#define MAX_MFD 63 /* Multiplier */ +#define MIN_MFD 0 /* Multiplier */ +#define USBDIV 8 + +/* Low Power Divider specifications */ +#define MIN_LPD (0) /* Divider (not encoded) */ +#define MAX_LPD (15) /* Divider (not encoded) */ +#define DEFAULT_LPD (0) /* Divider (not encoded) */ +#endif + +#ifdef CONFIG_MCF532x #define FREF 16000 /* KHz */ #define MAX_MFD 135 /* Multiplier */ #define MIN_MFD 88 /* Multiplier */ -#define BUSDIV 6 /* Divider */ -/* - * Low Power Divider specifications - */ + +/* Low Power Divider specifications */ #define MIN_LPD (1 << 0) /* Divider (not encoded) */ #define MAX_LPD (1 << 15) /* Divider (not encoded) */ #define DEFAULT_LPD (1 << 1) /* Divider (not encoded) */ +#endif -/* - * Get the value of the current system clock - * - * Parameters: - * none - * - * Return Value: - * The current output system frequency - */ +#define BUSDIV 6 /* Divider */ + +/* Get the value of the current system clock */ int get_sys_clock(void) { volatile ccm_t *ccm = (volatile ccm_t *)(MMAP_CCM); @@ -65,9 +72,23 @@ int get_sys_clock(void) /* Test to see if device is in LIMP mode */ if (ccm->misccr & CCM_MISCCR_LIMP) { divider = ccm->cdr & CCM_CDR_LPDIV(0xF); +#ifdef CONFIG_MCF5301x + return (FREF / (3 * (1 << divider))); +#endif +#ifdef CONFIG_MCF532x return (FREF / (2 << divider)); +#endif } else { +#ifdef CONFIG_MCF5301x + u32 pfdr = (pll->pcr & 0x3F) + 1; + u32 refdiv = (1 << ((pll->pcr & PLL_PCR_REFDIV(7)) >> 8)); + u32 busdiv = ((pll->pdr & 0x00F0) >> 4) + 1; + + return (((FREF * pfdr) / refdiv) / busdiv); +#endif +#ifdef CONFIG_MCF532x return ((FREF * pll->pfdr) / (BUSDIV * 4)); +#endif } } @@ -92,7 +113,7 @@ int clock_limp(int div) div = MAX_LPD; /* Save of the current value of the SSIDIV so we don't overwrite the value */ - temp = (ccm->cdr & CCM_CDR_SSIDIV(0xF)); + temp = (ccm->cdr & CCM_CDR_SSIDIV(0xFF)); /* Apply the divider to the system clock */ ccm->cdr = (CCM_CDR_LPDIV(div) | CCM_CDR_SSIDIV(temp)); @@ -102,15 +123,7 @@ int clock_limp(int div) return (FREF / (3 * (1 << div))); } -/* - * Exit low power LIMP mode - * - * Parameters: - * div Desired system frequency divider - * - * Return Value: - * The resulting output system frequency - */ +/* Exit low power LIMP mode */ int clock_exit_limp(void) { volatile ccm_t *ccm = (volatile ccm_t *)(MMAP_CCM); @@ -139,7 +152,10 @@ int clock_exit_limp(void) */ int clock_pll(int fsys, int flags) { +#ifdef CONFIG_MCF532x volatile u32 *sdram_workaround = (volatile u32 *)(MMAP_SDRAM + 0x80); +#endif + volatile sdram_t *sdram = (volatile sdram_t *)(MMAP_SDRAM); volatile pll_t *pll = (volatile pll_t *)(MMAP_PLL); int fref, temp, fout, mfd; u32 i; @@ -148,9 +164,17 @@ int clock_pll(int fsys, int flags) if (fsys == 0) { /* Return current PLL output */ +#ifdef CONFIG_MCF5301x + u32 busdiv = ((pll->pdr >> 4) & 0x0F) + 1; + mfd = (pll->pcr & 0x3F) + 1; + + return (fref * mfd) / busdiv; +#endif +#ifdef CONFIG_MCF532x mfd = pll->pfdr; return (fref * mfd / (BUSDIV * 4)); +#endif } /* Check bounds of requested system clock */ @@ -160,21 +184,33 @@ int clock_pll(int fsys, int flags) if (fsys < MIN_FSYS) fsys = MIN_FSYS; - /* Multiplying by 100 when calculating the temp value, - and then dividing by 100 to calculate the mfd allows - for exact values without needing to include floating - point libraries. */ + /* + * Multiplying by 100 when calculating the temp value, + * and then dividing by 100 to calculate the mfd allows + * for exact values without needing to include floating + * point libraries. + */ temp = (100 * fsys) / fref; +#ifdef CONFIG_MCF5301x + mfd = (BUSDIV * temp) / 100; + + /* Determine the output frequency for selected values */ + fout = ((fref * mfd) / BUSDIV); +#endif +#ifdef CONFIG_MCF532x mfd = (4 * BUSDIV * temp) / 100; /* Determine the output frequency for selected values */ fout = ((fref * mfd) / (BUSDIV * 4)); +#endif /* * Check to see if the SDRAM has already been initialized. * If it has then the SDRAM needs to be put into self refresh * mode before reprogramming the PLL. */ + if (sdram->ctrl & SDRAMC_SDCR_REF) + sdram->ctrl &= ~SDRAMC_SDCR_CKE; /* * Initialize the PLL to generate the new system clock frequency. @@ -184,20 +220,37 @@ int clock_pll(int fsys, int flags) /* Enter LIMP mode */ clock_limp(DEFAULT_LPD); +#ifdef CONFIG_MCF5301x + pll->pdr = + PLL_PDR_OUTDIV1((BUSDIV / 3) - 1) | + PLL_PDR_OUTDIV2(BUSDIV - 1) | + PLL_PDR_OUTDIV3((BUSDIV / 2) - 1) | + PLL_PDR_OUTDIV4(USBDIV - 1); + + pll->pcr &= PLL_PCR_FBDIV_MASK; + pll->pcr |= PLL_PCR_FBDIV(mfd - 1); +#endif +#ifdef CONFIG_MCF532x /* Reprogram PLL for desired fsys */ pll->podr = (PLL_PODR_CPUDIV(BUSDIV / 3) | PLL_PODR_BUSDIV(BUSDIV)); pll->pfdr = mfd; +#endif /* Exit LIMP mode */ clock_exit_limp(); + /* Return the SDRAM to normal operation if it is in use. */ + if (sdram->ctrl & SDRAMC_SDCR_REF) + sdram->ctrl |= SDRAMC_SDCR_CKE; + +#ifdef CONFIG_MCF532x /* - * Return the SDRAM to normal operation if it is in use. + * software workaround for SDRAM opeartion after exiting LIMP + * mode errata */ - - /* software workaround for SDRAM opeartion after exiting LIMP mode errata */ *sdram_workaround = CONFIG_SYS_SDRAM_BASE; +#endif /* wait for DQS logic to relock */ for (i = 0; i < 0x200; i++) ; @@ -205,9 +258,7 @@ int clock_pll(int fsys, int flags) return fout; } -/* - * get_clocks() fills in gd->cpu_clock and gd->bus_clk - */ +/* get_clocks() fills in gd->cpu_clock and gd->bus_clk */ int get_clocks(void) { gd->bus_clk = clock_pll(CONFIG_SYS_CLK / 1000, 0) * 1000; diff --git a/cpu/mcf532x/start.S b/cpu/mcf532x/start.S index 7a3eb5f98c..8fa605a644 100644 --- a/cpu/mcf532x/start.S +++ b/cpu/mcf532x/start.S @@ -2,6 +2,9 @@ * Copyright (C) 2003 Josef Baumgartner <josef.baumgartner@telex.de> * Based on code from Bernhard Kuhn <bkuhn@metrowerks.com> * + * (C) Copyright 2004-2008 Freescale Semiconductor, Inc. + * TsiChung Liew (Tsi-Chung.Liew@freescale.com) + * * See file CREDITS for list of people who contributed to this * project. * @@ -140,6 +143,14 @@ _start: movec %d0, %ACR0 movec %d0, %ACR1 +#ifdef CONFIG_MCF5301x + move.l #(0xFC0a0010), %a0 + move.w (%a0), %d0 + and.l %d0, 0xEFFF + + move.w %d0, (%a0) +#endif + /* initialize general use internal ram */ move.l #0, %d0 move.l #(CONFIG_SYS_INIT_RAM_ADDR+CONFIG_SYS_INIT_RAM_END-8), %a1 diff --git a/cpu/mcf5445x/cpu_init.c b/cpu/mcf5445x/cpu_init.c index 50b4561f3f..7e04e32c70 100644 --- a/cpu/mcf5445x/cpu_init.c +++ b/cpu/mcf5445x/cpu_init.c @@ -27,10 +27,15 @@ #include <common.h> #include <watchdog.h> - #include <asm/immap.h> #include <asm/rtc.h> +#if defined(CONFIG_CMD_NET) +#include <config.h> +#include <net.h> +#include <asm/fec.h> +#endif + /* * Breath some life into the CPU... * @@ -139,3 +144,30 @@ void uart_port_conf(void) break; } } + +#if defined(CONFIG_CMD_NET) +int fecpin_setclear(struct eth_device *dev, int setclear) +{ + volatile gpio_t *gpio = (gpio_t *) MMAP_GPIO; + struct fec_info_s *info = (struct fec_info_s *)dev->priv; + + if (setclear) { + gpio->par_feci2c |= + (GPIO_PAR_FECI2C_MDC0_MDC0 | GPIO_PAR_FECI2C_MDIO0_MDIO0); + + if (info->iobase == CONFIG_SYS_FEC0_IOBASE) + gpio->par_fec |= GPIO_PAR_FEC_FEC0_RMII_GPIO; + else + gpio->par_fec |= GPIO_PAR_FEC_FEC1_RMII_ATA; + } else { + gpio->par_feci2c &= + ~(GPIO_PAR_FECI2C_MDC0_MDC0 | GPIO_PAR_FECI2C_MDIO0_MDIO0); + + if (info->iobase == CONFIG_SYS_FEC0_IOBASE) + gpio->par_fec &= GPIO_PAR_FEC_FEC0_MASK; + else + gpio->par_fec &= GPIO_PAR_FEC_FEC1_MASK; + } + return 0; +} +#endif diff --git a/cpu/mcf547x_8x/cpu_init.c b/cpu/mcf547x_8x/cpu_init.c index 9a0e04083c..1ba57835e5 100644 --- a/cpu/mcf547x_8x/cpu_init.c +++ b/cpu/mcf547x_8x/cpu_init.c @@ -29,6 +29,12 @@ #include <MCD_dma.h> #include <asm/immap.h> +#if defined(CONFIG_CMD_NET) +#include <config.h> +#include <net.h> +#include <asm/fsl_mcdmafec.h> +#endif + /* * Breath some life into the CPU... * @@ -130,3 +136,24 @@ void uart_port_conf(void) *pscsicr &= 0xF8; } + +#if defined(CONFIG_CMD_NET) +int fecpin_setclear(struct eth_device *dev, int setclear) +{ + volatile gpio_t *gpio = (gpio_t *) MMAP_GPIO; + struct fec_info_dma *info = (struct fec_info_dma *)dev->priv; + + if (setclear) { + if (info->iobase == CONFIG_SYS_FEC0_IOBASE) + gpio->par_feci2cirq |= 0xF000; + else + gpio->par_feci2cirq |= 0x0FC0; + } else { + if (info->iobase == CONFIG_SYS_FEC0_IOBASE) + gpio->par_feci2cirq &= 0x0FFF; + else + gpio->par_feci2cirq &= 0xF03F; + } + return 0; +} +#endif diff --git a/disk/part_efi.h b/disk/part_efi.h index aad905daa7..6bbb06bde9 100644 --- a/disk/part_efi.h +++ b/disk/part_efi.h @@ -43,33 +43,33 @@ #define GPT_ENTRY_NAME "gpt" #define EFI_GUID(a,b,c,d0,d1,d2,d3,d4,d5,d6,d7) \ -((efi_guid_t) \ -{{ (a) & 0xff, ((a) >> 8) & 0xff, ((a) >> 16) & 0xff, ((a) >> 24) & 0xff, \ - (b) & 0xff, ((b) >> 8) & 0xff, \ - (c) & 0xff, ((c) >> 8) & 0xff, \ - (d0), (d1), (d2), (d3), (d4), (d5), (d6), (d7) }}) + ((efi_guid_t) \ + {{ (a) & 0xff, ((a) >> 8) & 0xff, ((a) >> 16) & 0xff, ((a) >> 24) & 0xff, \ + (b) & 0xff, ((b) >> 8) & 0xff, \ + (c) & 0xff, ((c) >> 8) & 0xff, \ + (d0), (d1), (d2), (d3), (d4), (d5), (d6), (d7) }}) #define PARTITION_SYSTEM_GUID \ - EFI_GUID( 0xC12A7328, 0xF81F, 0x11d2, \ - 0xBA, 0x4B, 0x00, 0xA0, 0xC9, 0x3E, 0xC9, 0x3B) + EFI_GUID( 0xC12A7328, 0xF81F, 0x11d2, \ + 0xBA, 0x4B, 0x00, 0xA0, 0xC9, 0x3E, 0xC9, 0x3B) #define LEGACY_MBR_PARTITION_GUID \ - EFI_GUID( 0x024DEE41, 0x33E7, 0x11d3, \ - 0x9D, 0x69, 0x00, 0x08, 0xC7, 0x81, 0xF3, 0x9F) + EFI_GUID( 0x024DEE41, 0x33E7, 0x11d3, \ + 0x9D, 0x69, 0x00, 0x08, 0xC7, 0x81, 0xF3, 0x9F) #define PARTITION_MSFT_RESERVED_GUID \ - EFI_GUID( 0xE3C9E316, 0x0B5C, 0x4DB8, \ - 0x81, 0x7D, 0xF9, 0x2D, 0xF0, 0x02, 0x15, 0xAE) + EFI_GUID( 0xE3C9E316, 0x0B5C, 0x4DB8, \ + 0x81, 0x7D, 0xF9, 0x2D, 0xF0, 0x02, 0x15, 0xAE) #define PARTITION_BASIC_DATA_GUID \ - EFI_GUID( 0xEBD0A0A2, 0xB9E5, 0x4433, \ - 0x87, 0xC0, 0x68, 0xB6, 0xB7, 0x26, 0x99, 0xC7) + EFI_GUID( 0xEBD0A0A2, 0xB9E5, 0x4433, \ + 0x87, 0xC0, 0x68, 0xB6, 0xB7, 0x26, 0x99, 0xC7) #define PARTITION_LINUX_RAID_GUID \ - EFI_GUID( 0xa19d880f, 0x05fc, 0x4d3b, \ - 0xa0, 0x06, 0x74, 0x3f, 0x0f, 0x84, 0x91, 0x1e) + EFI_GUID( 0xa19d880f, 0x05fc, 0x4d3b, \ + 0xa0, 0x06, 0x74, 0x3f, 0x0f, 0x84, 0x91, 0x1e) #define PARTITION_LINUX_SWAP_GUID \ - EFI_GUID( 0x0657fd6d, 0xa4ab, 0x43c4, \ - 0x84, 0xe5, 0x09, 0x33, 0xc8, 0x4b, 0x4f, 0x4f) + EFI_GUID( 0x0657fd6d, 0xa4ab, 0x43c4, \ + 0x84, 0xe5, 0x09, 0x33, 0xc8, 0x4b, 0x4f, 0x4f) #define PARTITION_LINUX_LVM_GUID \ - EFI_GUID( 0xe6d6d379, 0xf507, 0x44c2, \ - 0xa2, 0x3c, 0x23, 0x8f, 0x2a, 0x3d, 0xf9, 0x28) + EFI_GUID( 0xe6d6d379, 0xf507, 0x44c2, \ + 0xa2, 0x3c, 0x23, 0x8f, 0x2a, 0x3d, 0xf9, 0x28) /* linux/include/efi.h */ typedef unsigned short efi_char16_t; @@ -80,14 +80,14 @@ typedef struct { /* based on linux/include/genhd.h */ struct partition { - unsigned char boot_ind; /* 0x80 - active */ - unsigned char head; /* starting head */ - unsigned char sector; /* starting sector */ - unsigned char cyl; /* starting cylinder */ - unsigned char sys_ind; /* What partition type */ - unsigned char end_head; /* end head */ + unsigned char boot_ind; /* 0x80 - active */ + unsigned char head; /* starting head */ + unsigned char sector; /* starting sector */ + unsigned char cyl; /* starting cylinder */ + unsigned char sys_ind; /* What partition type */ + unsigned char end_head; /* end head */ unsigned char end_sector; /* end sector */ - unsigned char end_cyl; /* end cylinder */ + unsigned char end_cyl; /* end cylinder */ unsigned char start_sect[4]; /* starting sector counting from 0 */ unsigned char nr_sects[4]; /* nr of sectors in partition */ } __attribute__ ((packed)); @@ -135,4 +135,4 @@ typedef struct _legacy_mbr { unsigned char signature[2]; } __attribute__ ((packed)) legacy_mbr; -#endif /* _DISK_PART_EFI_H */ +#endif /* _DISK_PART_EFI_H */ diff --git a/doc/README.m53017evb b/doc/README.m53017evb new file mode 100644 index 0000000000..60cfa95af3 --- /dev/null +++ b/doc/README.m53017evb @@ -0,0 +1,181 @@ +Freescale MCF53017EVB ColdFire Development Board +================================================ + +TsiChung Liew(Tsi-Chung.Liew@freescale.com) +Created 10/22/08 +=========================================== + + +Changed files: +============== + +- board/freescale/m53017evb/m53017evb.c Dram setup +- board/freescale/m53017evb/mii.c Mii access +- board/freescale/m53017evb/Makefile Makefile +- board/freescale/m53017evb/config.mk config make +- board/freescale/m53017evb/u-boot.lds Linker description + +- cpu/mcf532x/cpu.c cpu specific code +- cpu/mcf532x/cpu_init.c FBCS, Mux pins, icache and RTC extra regs +- cpu/mcf532x/interrupts.c cpu specific interrupt support +- cpu/mcf532x/speed.c system, flexbus, and cpu clock +- cpu/mcf532x/Makefile Makefile +- cpu/mcf532x/config.mk config make +- cpu/mcf532x/start.S start up assembly code + +- doc/README.m53017evb This readme file + +- drivers/net/mcffec.c ColdFire common FEC driver +- drivers/net/mcfmii.c ColdFire common Mii driver +- drivers/serial/mcfuart.c ColdFire common UART driver +- drivers/rtc/mcfrtc.c Realtime clock Driver + +- include/asm-m68k/bitops.h Bit operation function export +- include/asm-m68k/byteorder.h Byte order functions +- include/asm-m68k/fec.h FEC structure and definition +- include/asm-m68k/fsl_i2c.h I2C structure and definition +- include/asm-m68k/global_data.h Global data structure +- include/asm-m68k/immap.h ColdFire specific header file and driver macros +- include/asm-m68k/immap_5301x.h mcf5301x specific header file +- include/asm-m68k/io.h io functions +- include/asm-m68k/m532x.h mcf5301x specific header file +- include/asm-m68k/posix_types.h Posix +- include/asm-m68k/processor.h header file +- include/asm-m68k/ptrace.h Exception structure +- include/asm-m68k/rtc.h Realtime clock header file +- include/asm-m68k/string.h String function export +- include/asm-m68k/timer.h Timer structure and definition +- include/asm-m68k/types.h Data types definition +- include/asm-m68k/uart.h Uart structure and definition +- include/asm-m68k/u-boot.h u-boot structure + +- include/configs/M53017EVB.h Board specific configuration file + +- lib_m68k/board.c board init function +- lib_m68k/cache.c +- lib_m68k/interrupts Coldfire common interrupt functions +- lib_m68k/m68k_linux.c +- lib_m68k/time.c Timer functions (Dma timer and PIT) +- lib_m68k/traps.c Exception init code + +1 MCF5301x specific Options/Settings +==================================== +1.1 pre-loader is no longer suppoer in thie coldfire family + +1.2 Configuration settings for M53017EVB Development Board +CONFIG_MCF5301x -- define for all MCF5301x CPUs +CONFIG_M53015 -- define for MCF53015 CPUs +CONFIG_M53017EVB -- define for M53017EVB board + +CONFIG_MCFUART -- define to use common CF Uart driver +CONFIG_SYS_UART_PORT -- define UART port number, start with 0, 1 and 2 +CONFIG_BAUDRATE -- define UART baudrate + +CONFIG_MCFRTC -- define to use common CF RTC driver +CONFIG_SYS_MCFRTC_BASE -- provide base address for RTC in immap.h +CONFIG_SYS_RTC_OSCILLATOR -- define RTC clock frequency +RTC_DEBUG -- define to show RTC debug message +CONFIG_CMD_DATE -- enable to use date feature in u-boot + +CONFIG_MCFFEC -- define to use common CF FEC driver +CONFIG_NET_MULTI -- define to use multi FEC in u-boot +CONFIG_MII -- enable to use MII driver +CONFIG_CF_DOMII -- enable to use MII feature in cmd_mii.c +CONFIG_SYS_DISCOVER_PHY -- enable PHY discovery +CONFIG_SYS_RX_ETH_BUFFER -- Set FEC Receive buffer +CONFIG_SYS_FAULT_ECHO_LINK_DOWN -- +CONFIG_SYS_FEC0_PINMUX -- Set FEC0 Pin configuration +CONFIG_SYS_FEC0_MIIBASE -- Set FEC0 MII base register +MCFFEC_TOUT_LOOP -- set FEC timeout loop + +CONFIG_MCFTMR -- define to use DMA timer +CONFIG_MCFPIT -- define to use PIT timer + +CONFIG_FSL_I2C -- define to use FSL common I2C driver +CONFIG_HARD_I2C -- define for I2C hardware support +CONFIG_SOFT_I2C -- define for I2C bit-banged +CONFIG_SYS_I2C_SPEED -- define for I2C speed +CONFIG_SYS_I2C_SLAVE -- define for I2C slave address +CONFIG_SYS_I2C_OFFSET -- define for I2C base address offset +CONFIG_SYS_IMMR -- define for MBAR offset + +CONFIG_SYS_MBAR -- define MBAR offset + +CONFIG_MONITOR_IS_IN_RAM -- Not support + +CONFIG_SYS_INIT_RAM_ADDR -- defines the base address of the MCF5301x internal SRAM + +CONFIG_SYS_CSn_BASE -- defines the Chip Select Base register +CONFIG_SYS_CSn_MASK -- defines the Chip Select Mask register +CONFIG_SYS_CSn_CTRL -- defines the Chip Select Control register + +CONFIG_SYS_SDRAM_BASE -- defines the DRAM Base + +2. MEMORY MAP UNDER U-BOOT AND LINUX KERNEL +=========================================== +2.1. System memory map: + Flash: 0x00000000-0x3FFFFFFF (1024MB) + DDR: 0x40000000-0x7FFFFFFF (1024MB) + SRAM: 0x80000000-0x8FFFFFFF (256MB) + IP: 0xFC000000-0xFFFFFFFF (256MB) + +2.2. For the initial bringup, we adopted a consistent memory scheme between u-boot and + linux kernel, you can customize it based on your system requirements: + Flash0: 0x00000000-0x00FFFFFF (16MB) + DDR: 0x40000000-0x4FFFFFFF (256MB) + SRAM: 0x80000000-0x80007FFF (32KB) + IP: 0xFC000000-0xFC0FFFFF (64KB) + +3. COMPILATION +============== +3.1 To create U-Boot the gcc-4.x-xx compiler set (ColdFire ELF or +uClinux version) from codesourcery.com was used. Download it from: +http://www.codesourcery.com/gnu_toolchains/coldfire/download.html + +3.2 Compilation + export CROSS_COMPILE=cross-compile-prefix + cd u-boot + make distclean + make M53017EVB_config + make + +4. SCREEN DUMP +============== +4.1 M53017EVB Development board + (NOTE: May not show exactly the same) + +U-Boot 2008.10 (Oct 22 2007 - 11:07:57) + +CPU: Freescale MCF53015 (Mask:76 Version:0) + CPU CLK 240 Mhz BUS CLK 80 Mhz +Board: Freescale M53017EVB +I2C: ready +DRAM: 64 MB +FLASH: 16 MB +In: serial +Out: serial +Err: serial +NAND: 16 MiB +Net: FEC0, FEC1 +-> print +bootdelay=1 +baudrate=115200 +ethaddr=00:e0:0c:bc:e5:60 +hostname=M53017EVB +netdev=eth0 +loadaddr=40010000 +u-boot=u-boot.bin +load=tftp ${loadaddr) ${u-boot} +upd=run load; run prog +prog=prot off 0 3ffff;era 0 3ffff;cp.b ${loadaddr} 0 ${filesize};save +gatewayip=192.168.1.1 +netmask=255.255.255.0 +ipaddr=192.168.1.3 +serverip=192.168.1.2 +stdin=serial +stdout=serial +stderr=serial +mem=65024k + +Environment size: 437/4092 bytes +-> diff --git a/include/asm-arm/arch-at91/hardware.h b/include/asm-arm/arch-at91/hardware.h index f31241901a..b881e4e2e0 100644 --- a/include/asm-arm/arch-at91/hardware.h +++ b/include/asm-arm/arch-at91/hardware.h @@ -20,7 +20,6 @@ #include <asm/arch/at91rm9200.h> #elif defined(CONFIG_AT91SAM9260) #include <asm/arch/at91sam9260.h> -#define AT91_BASE_EMAC AT91SAM9260_BASE_EMAC #define AT91_BASE_SPI AT91SAM9260_BASE_SPI0 #define AT91_ID_UHP AT91SAM9260_ID_UHP #define AT91_PMC_UHP AT91SAM926x_PMC_UHP @@ -31,7 +30,6 @@ #define AT91_PMC_UHP AT91SAM926x_PMC_UHP #elif defined(CONFIG_AT91SAM9263) #include <asm/arch/at91sam9263.h> -#define AT91_BASE_EMAC AT91SAM9263_BASE_EMAC #define AT91_BASE_SPI AT91SAM9263_BASE_SPI0 #define AT91_ID_UHP AT91SAM9263_ID_UHP #define AT91_PMC_UHP AT91SAM926x_PMC_UHP @@ -41,7 +39,6 @@ #define AT91_ID_UHP AT91SAM9RL_ID_UHP #elif defined(CONFIG_AT91CAP9) #include <asm/arch/at91cap9.h> -#define AT91_BASE_EMAC AT91CAP9_BASE_EMAC #define AT91_BASE_SPI AT91CAP9_BASE_SPI0 #define AT91_ID_UHP AT91CAP9_ID_UHP #define AT91_PMC_UHP AT91CAP9_PMC_UHP diff --git a/include/asm-m68k/coldfire/ata.h b/include/asm-m68k/coldfire/ata.h new file mode 100644 index 0000000000..3efd03a62a --- /dev/null +++ b/include/asm-m68k/coldfire/ata.h @@ -0,0 +1,79 @@ +/* + * ATA Internal Memory Map + * + * Copyright (C) 2004-2008 Freescale Semiconductor, Inc. + * TsiChung Liew (Tsi-Chung.Liew@freescale.com) + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __ATA_H__ +#define __ATA_H__ + +/* ATA */ +typedef struct atac { + /* PIO */ + u8 toff; /* 0x00 */ + u8 ton; /* 0x01 */ + u8 t1; /* 0x02 */ + u8 t2w; /* 0x03 */ + u8 t2r; /* 0x04 */ + u8 ta; /* 0x05 */ + u8 trd; /* 0x06 */ + u8 t4; /* 0x07 */ + u8 t9; /* 0x08 */ + + /* DMA */ + u8 tm; /* 0x09 */ + u8 tn; /* 0x0A */ + u8 td; /* 0x0B */ + u8 tk; /* 0x0C */ + u8 tack; /* 0x0D */ + u8 tenv; /* 0x0E */ + u8 trp; /* 0x0F */ + u8 tzah; /* 0x10 */ + u8 tmli; /* 0x11 */ + u8 tdvh; /* 0x12 */ + u8 tdzfs; /* 0x13 */ + u8 tdvs; /* 0x14 */ + u8 tcvh; /* 0x15 */ + u8 tss; /* 0x16 */ + u8 tcyc; /* 0x17 */ + + /* FIFO */ + u32 fifo32; /* 0x18 */ + u16 fifo16; /* 0x1C */ + u8 rsvd0[2]; + u8 ffill; /* 0x20 */ + u8 rsvd1[3]; + + /* ATA */ + u8 cr; /* 0x24 */ + u8 rsvd2[3]; + u8 isr; /* 0x28 */ + u8 rsvd3[3]; + u8 ier; /* 0x2C */ + u8 rsvd4[3]; + u8 icr; /* 0x30 */ + u8 rsvd5[3]; + u8 falarm; /* 0x34 */ + u8 rsvd6[106]; +} atac_t; + +#endif /* __ATA_H__ */ diff --git a/include/asm-m68k/coldfire/dspi.h b/include/asm-m68k/coldfire/dspi.h index 8327e1b68a..4b7d61e0fe 100644 --- a/include/asm-m68k/coldfire/dspi.h +++ b/include/asm-m68k/coldfire/dspi.h @@ -46,15 +46,14 @@ typedef struct dspi { u32 dirsr; u32 dtfr; u32 drfr; - u32 dtfdr0; - u32 dtfdr1; - u32 dtfdr2; - u32 dtfdr3; +#ifdef CONFIG_MCF547x_8x + u32 dtfdr[4]; u8 resv1[0x30]; - u32 drfdr0; - u32 drfdr1; - u32 drfdr2; - u32 drfdr3; + u32 drfdr[4]; +#else + u32 dtfdr[16]; + u32 drfdr[16]; +#endif } dspi_t; /* Bit definitions and macros for DMCR */ diff --git a/include/asm-m68k/coldfire/eport.h b/include/asm-m68k/coldfire/eport.h new file mode 100644 index 0000000000..1d1bf63310 --- /dev/null +++ b/include/asm-m68k/coldfire/eport.h @@ -0,0 +1,139 @@ +/* + * Edge Port Memory Map + * + * Copyright (C) 2004-2008 Freescale Semiconductor, Inc. + * TsiChung Liew (Tsi-Chung.Liew@freescale.com) + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __EPORT_H__ +#define __EPORT_H__ + +/* Edge Port Module (EPORT) */ +typedef struct eport { +#ifdef CONFIG_MCF547x_8x + u16 par; /* 0x00 */ + u16 res0; /* 0x02 */ + u8 ddr; /* 0x04 */ + u8 ier; /* 0x05 */ + u16 res1; /* 0x06 */ + u8 dr; /* 0x08 */ + u8 pdr; /* 0x09 */ + u16 res2; /* 0x0A */ + u8 fr; /* 0x0C */ + u8 res3[3]; /* 0x0D */ +#else + u16 par; /* 0x00 Pin Assignment */ + u8 ddr; /* 0x02 Data Direction */ + u8 ier; /* 0x03 Interrupt Enable */ + u8 dr; /* 0x04 Data */ + u8 pdr; /* 0x05 Pin Data */ + u8 fr; /* 0x06 Flag */ + u8 res0; +#endif +} eport_t; + +/* EPPAR */ +#define EPORT_PAR_EPPA1(x) (((x)&0x0003)<<2) +#define EPORT_PAR_EPPA2(x) (((x)&0x0003)<<4) +#define EPORT_PAR_EPPA3(x) (((x)&0x0003)<<6) +#define EPORT_PAR_EPPA4(x) (((x)&0x0003)<<8) +#define EPORT_PAR_EPPA5(x) (((x)&0x0003)<<10) +#define EPORT_PAR_EPPA6(x) (((x)&0x0003)<<12) +#define EPORT_PAR_EPPA7(x) (((x)&0x0003)<<14) +#define EPORT_PAR_LEVEL (0) +#define EPORT_PAR_RISING (1) +#define EPORT_PAR_FALLING (2) +#define EPORT_PAR_BOTH (3) +#define EPORT_PAR_EPPA7_LEVEL (0x0000) +#define EPORT_PAR_EPPA7_RISING (0x4000) +#define EPORT_PAR_EPPA7_FALLING (0x8000) +#define EPORT_PAR_EPPA7_BOTH (0xC000) +#define EPORT_PAR_EPPA6_LEVEL (0x0000) +#define EPORT_PAR_EPPA6_RISING (0x1000) +#define EPORT_PAR_EPPA6_FALLING (0x2000) +#define EPORT_PAR_EPPA6_BOTH (0x3000) +#define EPORT_PAR_EPPA5_LEVEL (0x0000) +#define EPORT_PAR_EPPA5_RISING (0x0400) +#define EPORT_PAR_EPPA5_FALLING (0x0800) +#define EPORT_PAR_EPPA5_BOTH (0x0C00) +#define EPORT_PAR_EPPA4_LEVEL (0x0000) +#define EPORT_PAR_EPPA4_RISING (0x0100) +#define EPORT_PAR_EPPA4_FALLING (0x0200) +#define EPORT_PAR_EPPA4_BOTH (0x0300) +#define EPORT_PAR_EPPA3_LEVEL (0x0000) +#define EPORT_PAR_EPPA3_RISING (0x0040) +#define EPORT_PAR_EPPA3_FALLING (0x0080) +#define EPORT_PAR_EPPA3_BOTH (0x00C0) +#define EPORT_PAR_EPPA2_LEVEL (0x0000) +#define EPORT_PAR_EPPA2_RISING (0x0010) +#define EPORT_PAR_EPPA2_FALLING (0x0020) +#define EPORT_PAR_EPPA2_BOTH (0x0030) +#define EPORT_PAR_EPPA1_LEVEL (0x0000) +#define EPORT_PAR_EPPA1_RISING (0x0004) +#define EPORT_PAR_EPPA1_FALLING (0x0008) +#define EPORT_PAR_EPPA1_BOTH (0x000C) + +/* EPDDR */ +#define EPORT_DDR_EPDD1 (0x02) +#define EPORT_DDR_EPDD2 (0x04) +#define EPORT_DDR_EPDD3 (0x08) +#define EPORT_DDR_EPDD4 (0x10) +#define EPORT_DDR_EPDD5 (0x20) +#define EPORT_DDR_EPDD6 (0x40) +#define EPORT_DDR_EPDD7 (0x80) + +/* EPIER */ +#define EPORT_IER_EPIE1 (0x02) +#define EPORT_IER_EPIE2 (0x04) +#define EPORT_IER_EPIE3 (0x08) +#define EPORT_IER_EPIE4 (0x10) +#define EPORT_IER_EPIE5 (0x20) +#define EPORT_IER_EPIE6 (0x40) +#define EPORT_IER_EPIE7 (0x80) + +/* EPDR */ +#define EPORT_DR_EPD1 (0x02) +#define EPORT_DR_EPD2 (0x04) +#define EPORT_DR_EPD3 (0x08) +#define EPORT_DR_EPD4 (0x10) +#define EPORT_DR_EPD5 (0x20) +#define EPORT_DR_EPD6 (0x40) +#define EPORT_DR_EPD7 (0x80) + +/* EPPDR */ +#define EPORT_PDR_EPPD1 (0x02) +#define EPORT_PDR_EPPD2 (0x04) +#define EPORT_PDR_EPPD3 (0x08) +#define EPORT_PDR_EPPD4 (0x10) +#define EPORT_PDR_EPPD5 (0x20) +#define EPORT_PDR_EPPD6 (0x40) +#define EPORT_PDR_EPPD7 (0x80) + +/* EPFR */ +#define EPORT_FR_EPF1 (0x02) +#define EPORT_FR_EPF2 (0x04) +#define EPORT_FR_EPF3 (0x08) +#define EPORT_FR_EPF4 (0x10) +#define EPORT_FR_EPF5 (0x20) +#define EPORT_FR_EPF6 (0x40) +#define EPORT_FR_EPF7 (0x80) + +#endif /* __EPORT_H__ */ diff --git a/include/asm-m68k/coldfire/flexbus.h b/include/asm-m68k/coldfire/flexbus.h index 1d902c07f9..51cbbd8b2b 100644 --- a/include/asm-m68k/coldfire/flexbus.h +++ b/include/asm-m68k/coldfire/flexbus.h @@ -31,33 +31,36 @@ *********************************************************************/ typedef struct fbcs { - u32 csar0; /* Chip-select Address Register */ - u32 csmr0; /* Chip-select Mask Register */ - u32 cscr0; /* Chip-select Control Register */ - u32 csar1; /* Chip-select Address Register */ - u32 csmr1; /* Chip-select Mask Register */ - u32 cscr1; /* Chip-select Control Register */ - u32 csar2; /* Chip-select Address Register */ - u32 csmr2; /* Chip-select Mask Register */ - u32 cscr2; /* Chip-select Control Register */ - u32 csar3; /* Chip-select Address Register */ - u32 csmr3; /* Chip-select Mask Register */ - u32 cscr3; /* Chip-select Control Register */ - u32 csar4; /* Chip-select Address Register */ - u32 csmr4; /* Chip-select Mask Register */ - u32 cscr4; /* Chip-select Control Register */ - u32 csar5; /* Chip-select Address Register */ - u32 csmr5; /* Chip-select Mask Register */ - u32 cscr5; /* Chip-select Control Register */ + u32 csar0; /* Chip-select Address */ + u32 csmr0; /* Chip-select Mask */ + u32 cscr0; /* Chip-select Control */ + u32 csar1; + u32 csmr1; + u32 cscr1; + u32 csar2; + u32 csmr2; + u32 cscr2; + u32 csar3; + u32 csmr3; + u32 cscr3; + u32 csar4; + u32 csmr4; + u32 cscr4; + u32 csar5; + u32 csmr5; + u32 cscr5; + u32 csar6; + u32 csmr6; + u32 cscr6; + u32 csar7; + u32 csmr7; + u32 cscr7; } fbcs_t; -/* Bit definitions and macros for CSAR group */ -#define FBCS_CSAR_BA(x) ((x)&0xFFFF0000) +#define FBCS_CSAR_BA(x) ((x) & 0xFFFF0000) -/* Bit definitions and macros for CSMR group */ -#define FBCS_CSMR_V (0x00000001) /* Valid bit */ -#define FBCS_CSMR_WP (0x00000100) /* Write protect */ -#define FBCS_CSMR_BAM(x) (((x)&0x0000FFFF)<<16) /* Base address mask */ +#define FBCS_CSMR_BAM(x) (((x) & 0xFFFF) << 16) +#define FBCS_CSMR_BAM_MASK (0x0000FFFF) #define FBCS_CSMR_BAM_4G (0xFFFF0000) #define FBCS_CSMR_BAM_2G (0x7FFF0000) #define FBCS_CSMR_BAM_1G (0x3FFF0000) @@ -78,21 +81,40 @@ typedef struct fbcs { #define FBCS_CSMR_BAM_128K (0x00010000) #define FBCS_CSMR_BAM_64K (0x00000000) -/* Bit definitions and macros for CSCR group */ -#define FBCS_CSCR_BSTW (0x00000008) /* Burst-write enable */ -#define FBCS_CSCR_BSTR (0x00000010) /* Burst-read enable */ -#define FBCS_CSCR_BEM (0x00000020) /* Byte-enable mode */ -#define FBCS_CSCR_PS(x) (((x)&0x00000003)<<6) /* Port size */ -#define FBCS_CSCR_AA (0x00000100) /* Auto-acknowledge */ -#define FBCS_CSCR_WS(x) (((x)&0x0000003F)<<10) /* Wait states */ -#define FBCS_CSCR_WRAH(x) (((x)&0x00000003)<<16) /* Write address hold or deselect */ -#define FBCS_CSCR_RDAH(x) (((x)&0x00000003)<<18) /* Read address hold or deselect */ -#define FBCS_CSCR_ASET(x) (((x)&0x00000003)<<20) /* Address setup */ -#define FBCS_CSCR_SWSEN (0x00800000) /* Secondary wait state enable */ -#define FBCS_CSCR_SWS(x) (((x)&0x0000003F)<<26) /* Secondary wait states */ +#ifdef CONFIG_M5249 +#define FBCS_CSMR_WP (0x00000080) +#define FBCS_CSMR_AM (0x00000040) +#define FBCS_CSMR_CI (0x00000020) +#define FBCS_CSMR_SC (0x00000010) +#define FBCS_CSMR_SD (0x00000008) +#define FBCS_CSMR_UC (0x00000004) +#define FBCS_CSMR_UD (0x00000002) +#else +#define FBCS_CSMR_WP (0x00000100) +#endif +#define FBCS_CSMR_V (0x00000001) /* Valid bit */ + +#define FBCS_CSCR_SWS(x) (((x) & 0x3F) << 26) +#define FBCS_CSCR_SWS_MASK (0x03FFFFFF) +#define FBCS_CSCR_SWSEN (0x00800000) +#define FBCS_CSCR_ASET(x) (((x) & 0x03) << 20) +#define FBCS_CSCR_ASET_MASK (0xFFCFFFFF) +#define FBCS_CSCR_RDAH(x) (((x) & 0x03) << 18) +#define FBCS_CSCR_RDAH_MASK (0xFFF3FFFF) +#define FBCS_CSCR_WRAH(x) (((x) & 0x03) << 16) +#define FBCS_CSCR_WRAH_MASK (0xFFFCFFFF) +#define FBCS_CSCR_WS(x) (((x) & 0x3F) << 10) +#define FBCS_CSCR_WS_MASK (0xFFFF03FF) +#define FBCS_CSCR_SBM (0x00000200) +#define FBCS_CSCR_AA (0x00000100) +#define FBCS_CSCR_PS(x) (((x) & 0x03) << 6) +#define FBCS_CSCR_PS_MASK (0xFFFFFF3F) +#define FBCS_CSCR_BEM (0x00000020) +#define FBCS_CSCR_BSTR (0x00000010) +#define FBCS_CSCR_BSTW (0x00000008) -#define FBCS_CSCR_PS_8 (0x00000040) #define FBCS_CSCR_PS_16 (0x00000080) +#define FBCS_CSCR_PS_8 (0x00000040) #define FBCS_CSCR_PS_32 (0x00000000) #endif /* __FLEXBUS_H */ diff --git a/include/asm-m68k/coldfire/flexcan.h b/include/asm-m68k/coldfire/flexcan.h new file mode 100644 index 0000000000..cafd44ff49 --- /dev/null +++ b/include/asm-m68k/coldfire/flexcan.h @@ -0,0 +1,219 @@ +/* + * Flex CAN Memory Map + * + * Copyright (C) 2004-2007 Freescale Semiconductor, Inc. + * TsiChung Liew (Tsi-Chung.Liew@freescale.com) + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __FLEXCAN_H__ +#define __FLEXCAN_H__ + +/* FlexCan Message Buffer */ +typedef struct can_msgbuf_ctrl { +#ifdef CONFIG_M5282 + u8 tmstamp; /* 0x00 Timestamp */ + u8 ctrl; /* 0x01 Control */ + u16 idh; /* 0x02 ID High */ + u16 idl; /* 0x04 ID High */ + u8 data[8]; /* 0x06 8 Byte Data Field */ + u16 res; /* 0x0E */ +#else + u16 ctrl; /* 0x00 Control/Status */ + u16 tmstamp; /* 0x02 Timestamp */ + u32 id; /* 0x04 Identifier */ + u8 data[8]; /* 0x08 8 Byte Data Field */ +#endif +} can_msg_t; + +#ifdef CONFIG_M5282 +/* MSGBUF CTRL */ +#define CAN_MSGBUF_CTRL_CODE(x) (((x) & 0x0F) << 4) +#define CAN_MSGBUF_CTRL_CODE_MASK (0x0F) +#define CAN_MSGBUF_CTRL_LEN(x) ((x) & 0x0F) +#define CAN_MSGBUF_CTRL_LEN_MASK (0xF0) + +/* MSGBUF ID */ +#define CAN_MSGBUF_IDH_STD(x) (((x) & 0x07FF) << 5) +#define CAN_MSGBUF_IDH_STD_MASK (0xE003FFFF) +#define CAN_MSGBUF_IDH_SRR (0x0010) +#define CAN_MSGBUF_IDH_IDE (0x0080) +#define CAN_MSGBUF_IDH_EXTH(x) ((x) & 0x07) +#define CAN_MSGBUF_IDH_EXTH_MASK (0xFFF8) +#define CAN_MSGBUF_IDL_EXTL(x) (((x) & 0x7FFF) << 1) +#define CAN_MSGBUF_IDL_EXTL_MASK (0xFFFE) +#define CAN_MSGBUF_IDL_RTR (0x0001) +#else +/* MSGBUF CTRL */ +#define CAN_MSGBUF_CTRL_CODE(x) (((x) & 0x000F) << 8) +#define CAN_MSGBUF_CTRL_CODE_MASK (0xF0FF) +#define CAN_MSGBUF_CTRL_SRR (0x0040) +#define CAN_MSGBUF_CTRL_IDE (0x0020) +#define CAN_MSGBUF_CTRL_RTR (0x0010) +#define CAN_MSGBUF_CTRL_LEN(x) ((x) & 0x000F) +#define CAN_MSGBUF_CTRL_LEN_MASK (0xFFF0) + +/* MSGBUF ID */ +#define CAN_MSGBUF_ID_STD(x) (((x) & 0x000007FF) << 18) +#define CAN_MSGBUF_ID_STD_MASK (0xE003FFFF) +#define CAN_MSGBUF_ID_EXT(x) ((x) & 0x0003FFFF) +#define CAN_MSGBUF_ID_EXT_MASK (0xFFFC0000) +#endif + +/* FlexCan module */ +typedef struct can_ctrl { + u32 mcr; /* 0x00 Module Configuration */ + u32 ctrl; /* 0x04 Control */ + u32 timer; /* 0x08 Free Running Timer */ + u32 res1; /* 0x0C */ + u32 rxgmsk; /* 0x10 Rx Global Mask */ + u32 rx14msk; /* 0x14 RxBuffer 14 Mask */ + u32 rx15msk; /* 0x18 RxBuffer 15 Mask */ +#ifdef CONFIG_M5282 + u32 res2; /* 0x1C */ + u16 errstat; /* 0x20 Error and status */ + u16 imsk; /* 0x22 Interrupt Mask */ + u16 iflag; /* 0x24 Interrupt Flag */ + u16 errcnt; /* 0x26 Error Counter */ + u32 res3[3]; /* 0x28 - 0x33 */ +#else + u16 res2; /* 0x1C */ + u16 errcnt; /* 0x1E Error Counter */ + u16 res3; /* 0x20 */ + u16 errstat; /* 0x22 Error and status */ + u32 res4; /* 0x24 */ + u32 imsk; /* 0x28 Interrupt Mask */ + u32 res5; /* 0x2C */ + u16 iflag; /* 0x30 Interrupt Flag */ +#endif + u32 res6[19]; /* 0x34 - 0x7F */ + void *msgbuf; /* 0x80 Message Buffer 0-15 */ +} can_t; + +/* MCR */ +#define CAN_MCR_MDIS (0x80000000) +#define CAN_MCR_FRZ (0x40000000) +#define CAN_MCR_HALT (0x10000000) +#define CAN_MCR_NORDY (0x08000000) +#define CAN_MCF_WAKEMSK (0x04000000) /* 5282 */ +#define CAN_MCR_SOFTRST (0x02000000) +#define CAN_MCR_FRZACK (0x01000000) +#define CAN_MCR_SUPV (0x00800000) +#define CAN_MCR_SELFWAKE (0x00400000) /* 5282 */ +#define CAN_MCR_APS (0x00200000) /* 5282 */ +#define CAN_MCR_LPMACK (0x00100000) +#define CAN_MCF_BCC (0x00010000) +#define CAN_MCR_MAXMB(x) ((x) & 0x0F) +#define CAN_MCR_MAXMB_MASK (0xFFFFFFF0) + +/* CTRL */ +#define CAN_CTRL_PRESDIV(x) (((x) & 0xFF) << 24) +#define CAN_CTRL_PRESDIV_MASK (0x00FFFFFF) +#define CAN_CTRL_RJW(x) (((x) & 0x03) << 22) +#define CAN_CTRL_RJW_MASK (0xFF3FFFFF) +#define CAN_CTRL_PSEG1(x) (((x) & 0x07) << 19) +#define CAN_CTRL_PSEG1_MASK (0xFFC7FFFF) +#define CAN_CTRL_PSEG2(x) (((x) & 0x07) << 16) +#define CAN_CTRL_PSEG2_MASK (0xFFF8FFFF) +#define CAN_CTRL_BOFFMSK (0x00008000) +#define CAN_CTRL_ERRMSK (0x00004000) +#define CAN_CTRL_CLKSRC (0x00002000) +#define CAN_CTRL_LPB (0x00001000) +#define CAN_CTRL_RXMODE (0x00000400) /* 5282 */ +#define CAN_CTRL_TXMODE(x) (((x) & 0x03) << 8) /* 5282 */ +#define CAN_CTRL_TXMODE_MASK (0xFFFFFCFF) /* 5282 */ +#define CAN_CTRL_TXMODE_CAN0 (0x00000000) /* 5282 */ +#define CAN_CTRL_TXMODE_CAN1 (0x00000100) /* 5282 */ +#define CAN_CTRL_TXMODE_OPEN (0x00000200) /* 5282 */ +#define CAN_CTRL_SMP (0x00000080) +#define CAN_CTRL_BOFFREC (0x00000040) +#define CAN_CTRL_TSYNC (0x00000020) +#define CAN_CTRL_LBUF (0x00000010) +#define CAN_CTRL_LOM (0x00000008) +#define CAN_CTRL_PROPSEG(x) ((x) & 0x07) +#define CAN_CTRL_PROPSEG_MASK (0xFFFFFFF8) + +/* TIMER */ +/* Note: PRESDIV, RJW, PSG1, and PSG2 are part of timer in 5282 */ +#define CAN_TIMER(x) ((x) & 0xFFFF) +#define CAN_TIMER_MASK (0xFFFF0000) + +/* RXGMASK */ +#ifdef CONFIG_M5282 +#define CAN_RXGMSK_MI_STD(x) (((x) & 0x000007FF) << 21) +#define CAN_RXGMSK_MI_STD_MASK (0x001FFFFF) +#define CAN_RXGMSK_MI_EXT(x) (((x) & 0x0003FFFF) << 1) +#define CAN_RXGMSK_MI_EXT_MASK (0xFFF80001) +#else +#define CAN_RXGMSK_MI_STD(x) (((x) & 0x000007FF) << 18) +#define CAN_RXGMSK_MI_STD_MASK (0xE003FFFF) +#define CAN_RXGMSK_MI_EXT(x) ((x) & 0x0003FFFF) +#define CAN_RXGMSK_MI_EXT_MASK (0xFFFC0000) +#endif + +/* ERRCNT */ +#define CAN_ERRCNT_RXECTR(x) (((x) & 0xFF) << 8) +#define CAN_ERRCNT_RXECTR_MASK (0x00FF) +#define CAN_ERRCNT_TXECTR(x) ((x) & 0xFF) +#define CAN_ERRCNT_TXECTR_MASK (0xFF00) + +/* ERRSTAT */ +#define CAN_ERRSTAT_BITERR1 (0x8000) +#define CAN_ERRSTAT_BITERR0 (0x4000) +#define CAN_ERRSTAT_ACKERR (0x2000) +#define CAN_ERRSTAT_CRCERR (0x1000) +#define CAN_ERRSTAT_FRMERR (0x0800) +#define CAN_ERRSTAT_STFERR (0x0400) +#define CAN_ERRSTAT_TXWRN (0x0200) +#define CAN_ERRSTAT_RXWRN (0x0100) +#define CAN_ERRSTAT_IDLE (0x0080) +#define CAN_ERRSTAT_TXRX (0x0040) +#define CAN_ERRSTAT_FLT_MASK (0xFFCF) +#define CAN_ERRSTAT_FLT_BUSOFF (0x0020) +#define CAN_ERRSTAT_FLT_PASSIVE (0x0010) +#define CAN_ERRSTAT_FLT_ACTIVE (0x0000) +#ifdef CONFIG_M5282 +#define CAN_ERRSTAT_BOFFINT (0x0004) +#define CAN_ERRSTAT_ERRINT (0x0002) +#else +#define CAN_ERRSTAT_ERRINT (0x0004) +#define CAN_ERRSTAT_BOFFINT (0x0002) +#define CAN_ERRSTAT_WAKEINT (0x0001) +#endif + +/* IMASK */ +#ifdef CONFIG_M5253 +#define CAN_IMASK_BUFnM(x) (1 << (x & 0xFFFFFFFF)) +#define CAN_IMASK_BUFnM_MASKBIT(x) ~CAN_IMASK_BUFnM(x) +#else +#define CAN_IMASK_BUFnM(x) (1 << (x & 0xFFFF)) +#define CAN_IMASK_BUFnM_MASKBIT(x) ~CAN_IMASK_BUFnM(x) +#endif + +/* IFLAG */ +#ifdef CONFIG_M5253 +#define CAN_IFLAG_BUFnM(x) (1 << (x & 0xFFFFFFFF)) +#define CAN_IFLAG_BUFnM_MASKBIT(x) ~CAN_IFLAG_BUFnM(x) +#else +#define CAN_IFLAG_BUFnM(x) (1 << (x & 0xFFFF)) +#define CAN_IFLAG_BUFnM_MASKBIT(x) ~CAN_IFLAG_BUFnM(x) +#endif + +#endif /* __FLEXCAN_H__ */ diff --git a/include/asm-m68k/coldfire/intctrl.h b/include/asm-m68k/coldfire/intctrl.h new file mode 100644 index 0000000000..ae82b292b1 --- /dev/null +++ b/include/asm-m68k/coldfire/intctrl.h @@ -0,0 +1,246 @@ +/* + * Interrupt Controller Memory Map + * + * Copyright (C) 2004-2008 Freescale Semiconductor, Inc. + * TsiChung Liew (Tsi-Chung.Liew@freescale.com) + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __INTCTRL_H__ +#define __INTCTRL_H__ + +#if defined(CONFIG_M5235) || defined(CONFIG_M5271) || \ + defined(CONFIG_M5275) || defined(CONFIG_M5282) || \ + defined(CONFIG_M547x) || defined(CONFIG_M548x) +# define CONFIG_SYS_CF_INTC_REG1 +#endif + +typedef struct int0_ctrl { + /* Interrupt Controller 0 */ + u32 iprh0; /* 0x00 Pending High */ + u32 iprl0; /* 0x04 Pending Low */ + u32 imrh0; /* 0x08 Mask High */ + u32 imrl0; /* 0x0C Mask Low */ + u32 frch0; /* 0x10 Force High */ + u32 frcl0; /* 0x14 Force Low */ +#if defined(CONFIG_SYS_CF_INTC_REG1) + u8 irlr; /* 0x18 */ + u8 iacklpr; /* 0x19 */ + u16 res1[19]; /* 0x1a - 0x3c */ +#else + u16 res1; /* 0x18 - 0x19 */ + u16 icfg0; /* 0x1A Configuration */ + u8 simr0; /* 0x1C Set Interrupt Mask */ + u8 cimr0; /* 0x1D Clear Interrupt Mask */ + u8 clmask0; /* 0x1E Current Level Mask */ + u8 slmask; /* 0x1F Saved Level Mask */ + u32 res2[8]; /* 0x20 - 0x3F */ +#endif + u8 icr0[64]; /* 0x40 - 0x7F Control registers */ + u32 res3[24]; /* 0x80 - 0xDF */ + u8 swiack0; /* 0xE0 Software Interrupt ack */ + u8 res4[3]; /* 0xE1 - 0xE3 */ + u8 L1iack0; /* 0xE4 Level n interrupt ack */ + u8 res5[3]; /* 0xE5 - 0xE7 */ + u8 L2iack0; /* 0xE8 Level n interrupt ack */ + u8 res6[3]; /* 0xE9 - 0xEB */ + u8 L3iack0; /* 0xEC Level n interrupt ack */ + u8 res7[3]; /* 0xED - 0xEF */ + u8 L4iack0; /* 0xF0 Level n interrupt ack */ + u8 res8[3]; /* 0xF1 - 0xF3 */ + u8 L5iack0; /* 0xF4 Level n interrupt ack */ + u8 res9[3]; /* 0xF5 - 0xF7 */ + u8 L6iack0; /* 0xF8 Level n interrupt ack */ + u8 resa[3]; /* 0xF9 - 0xFB */ + u8 L7iack0; /* 0xFC Level n interrupt ack */ + u8 resb[3]; /* 0xFD - 0xFF */ +} int0_t; + +typedef struct int1_ctrl { + /* Interrupt Controller 1 */ + u32 iprh1; /* 0x00 Pending High */ + u32 iprl1; /* 0x04 Pending Low */ + u32 imrh1; /* 0x08 Mask High */ + u32 imrl1; /* 0x0C Mask Low */ + u32 frch1; /* 0x10 Force High */ + u32 frcl1; /* 0x14 Force Low */ +#if defined(CONFIG_SYS_CF_INTC_REG1) + u8 irlr; /* 0x18 */ + u8 iacklpr; /* 0x19 */ + u16 res1[19]; /* 0x1a - 0x3c */ +#else + u16 res1; /* 0x18 */ + u16 icfg1; /* 0x1A Configuration */ + u8 simr1; /* 0x1C Set Interrupt Mask */ + u8 cimr1; /* 0x1D Clear Interrupt Mask */ + u16 res2; /* 0x1E - 0x1F */ + u32 res3[8]; /* 0x20 - 0x3F */ +#endif + u8 icr1[64]; /* 0x40 - 0x7F */ + u32 res4[24]; /* 0x80 - 0xDF */ + u8 swiack1; /* 0xE0 Software Interrupt ack */ + u8 res5[3]; /* 0xE1 - 0xE3 */ + u8 L1iack1; /* 0xE4 Level n interrupt ack */ + u8 res6[3]; /* 0xE5 - 0xE7 */ + u8 L2iack1; /* 0xE8 Level n interrupt ack */ + u8 res7[3]; /* 0xE9 - 0xEB */ + u8 L3iack1; /* 0xEC Level n interrupt ack */ + u8 res8[3]; /* 0xED - 0xEF */ + u8 L4iack1; /* 0xF0 Level n interrupt ack */ + u8 res9[3]; /* 0xF1 - 0xF3 */ + u8 L5iack1; /* 0xF4 Level n interrupt ack */ + u8 resa[3]; /* 0xF5 - 0xF7 */ + u8 L6iack1; /* 0xF8 Level n interrupt ack */ + u8 resb[3]; /* 0xF9 - 0xFB */ + u8 L7iack1; /* 0xFC Level n interrupt ack */ + u8 resc[3]; /* 0xFD - 0xFF */ +} int1_t; + +typedef struct intgack_ctrl1 { + /* Global IACK Registers */ + u8 swiack; /* 0x00 Global Software Interrupt ack */ + u8 res0[0x3]; + u8 gl1iack; /* 0x04 */ + u8 resv1[0x3]; + u8 gl2iack; /* 0x08 */ + u8 res2[0x3]; + u8 gl3iack; /* 0x0C */ + u8 res3[0x3]; + u8 gl4iack; /* 0x10 */ + u8 res4[0x3]; + u8 gl5iack; /* 0x14 */ + u8 res5[0x3]; + u8 gl6iack; /* 0x18 */ + u8 res6[0x3]; + u8 gl7iack; /* 0x1C */ + u8 res7[0x3]; +} intgack_t; + +#define INTC_IPRH_INT63 (0x80000000) +#define INTC_IPRH_INT62 (0x40000000) +#define INTC_IPRH_INT61 (0x20000000) +#define INTC_IPRH_INT60 (0x10000000) +#define INTC_IPRH_INT59 (0x08000000) +#define INTC_IPRH_INT58 (0x04000000) +#define INTC_IPRH_INT57 (0x02000000) +#define INTC_IPRH_INT56 (0x01000000) +#define INTC_IPRH_INT55 (0x00800000) +#define INTC_IPRH_INT54 (0x00400000) +#define INTC_IPRH_INT53 (0x00200000) +#define INTC_IPRH_INT52 (0x00100000) +#define INTC_IPRH_INT51 (0x00080000) +#define INTC_IPRH_INT50 (0x00040000) +#define INTC_IPRH_INT49 (0x00020000) +#define INTC_IPRH_INT48 (0x00010000) +#define INTC_IPRH_INT47 (0x00008000) +#define INTC_IPRH_INT46 (0x00004000) +#define INTC_IPRH_INT45 (0x00002000) +#define INTC_IPRH_INT44 (0x00001000) +#define INTC_IPRH_INT43 (0x00000800) +#define INTC_IPRH_INT42 (0x00000400) +#define INTC_IPRH_INT41 (0x00000200) +#define INTC_IPRH_INT40 (0x00000100) +#define INTC_IPRH_INT39 (0x00000080) +#define INTC_IPRH_INT38 (0x00000040) +#define INTC_IPRH_INT37 (0x00000020) +#define INTC_IPRH_INT36 (0x00000010) +#define INTC_IPRH_INT35 (0x00000008) +#define INTC_IPRH_INT34 (0x00000004) +#define INTC_IPRH_INT33 (0x00000002) +#define INTC_IPRH_INT32 (0x00000001) + +#define INTC_IPRL_INT31 (0x80000000) +#define INTC_IPRL_INT30 (0x40000000) +#define INTC_IPRL_INT29 (0x20000000) +#define INTC_IPRL_INT28 (0x10000000) +#define INTC_IPRL_INT27 (0x08000000) +#define INTC_IPRL_INT26 (0x04000000) +#define INTC_IPRL_INT25 (0x02000000) +#define INTC_IPRL_INT24 (0x01000000) +#define INTC_IPRL_INT23 (0x00800000) +#define INTC_IPRL_INT22 (0x00400000) +#define INTC_IPRL_INT21 (0x00200000) +#define INTC_IPRL_INT20 (0x00100000) +#define INTC_IPRL_INT19 (0x00080000) +#define INTC_IPRL_INT18 (0x00040000) +#define INTC_IPRL_INT17 (0x00020000) +#define INTC_IPRL_INT16 (0x00010000) +#define INTC_IPRL_INT15 (0x00008000) +#define INTC_IPRL_INT14 (0x00004000) +#define INTC_IPRL_INT13 (0x00002000) +#define INTC_IPRL_INT12 (0x00001000) +#define INTC_IPRL_INT11 (0x00000800) +#define INTC_IPRL_INT10 (0x00000400) +#define INTC_IPRL_INT9 (0x00000200) +#define INTC_IPRL_INT8 (0x00000100) +#define INTC_IPRL_INT7 (0x00000080) +#define INTC_IPRL_INT6 (0x00000040) +#define INTC_IPRL_INT5 (0x00000020) +#define INTC_IPRL_INT4 (0x00000010) +#define INTC_IPRL_INT3 (0x00000008) +#define INTC_IPRL_INT2 (0x00000004) +#define INTC_IPRL_INT1 (0x00000002) +#define INTC_IPRL_INT0 (0x00000001) + +#define INTC_IMRLn_MASKALL (0x00000001) + +#define INTC_IRLR(x) (((x) & 0x7F) << 1) +#define INTC_IRLR_MASK (0x01) + +#define INTC_IACKLPR_LVL(x) (((x) & 0x07) << 4) +#define INTC_IACKLPR_LVL_MASK (0x8F) +#define INTC_IACKLPR_PRI(x) ((x) & 0x0F) +#define INTC_IACKLPR_PRI_MASK (0xF0) + +#if defined(CONFIG_SYS_CF_INTC_REG1) +#define INTC_ICR_IL(x) (((x) & 0x07) << 3) +#define INTC_ICR_IL_MASK (0xC7) +#define INTC_ICR_IP(x) ((x) & 0x07) +#define INTC_ICR_IP_MASK (0xF8) +#else +#define INTC_ICR_IL(x) ((x) & 0x07) +#define INTC_ICR_IL_MASK (0xF8) +#endif + +#define INTC_ICONFIG_ELVLPRI_MASK (0x01FF) +#define INTC_ICONFIG_ELVLPRI7 (0x8000) +#define INTC_ICONFIG_ELVLPRI6 (0x4000) +#define INTC_ICONFIG_ELVLPRI5 (0x2000) +#define INTC_ICONFIG_ELVLPRI4 (0x1000) +#define INTC_ICONFIG_ELVLPRI3 (0x0800) +#define INTC_ICONFIG_ELVLPRI2 (0x0400) +#define INTC_ICONFIG_ELVLPRI1 (0x0200) +#define INTC_ICONFIG_EMASK (0x0020) + +#define INTC_SIMR_ALL (0x40) +#define INTC_SIMR(x) ((x) & 0x3F) +#define INTC_SIMR_MASK (0x80) + +#define INTC_CIMR_ALL (0x40) +#define INTC_CIMR(x) ((x) & 0x3F) +#define INTC_CIMR_MASK (0x80) + +#define INTC_CLMASK(x) ((x) & 0x0F) +#define INTC_CLMASK_MASK (0xF0) + +#define INTC_SLMASK(x) ((x) & 0x0F) +#define INTC_SLMASK_MASK (0xF0) + +#endif /* __INTCTRL_H__ */ diff --git a/include/asm-m68k/coldfire/mdha.h b/include/asm-m68k/coldfire/mdha.h new file mode 100644 index 0000000000..b698136371 --- /dev/null +++ b/include/asm-m68k/coldfire/mdha.h @@ -0,0 +1,102 @@ +/* + * Message Digest Hardware Accelerator Memory Map + * + * Copyright (C) 2004-2008 Freescale Semiconductor, Inc. + * TsiChung Liew (Tsi-Chung.Liew@freescale.com) + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __MDHA_H__ +#define __MDHA_H__ + +/* Message Digest Hardware Accelerator */ +typedef struct mdha_ctrl { + u32 mr; /* 0x00 MDHA Mode */ + u32 cr; /* 0x04 Control */ + u32 cmd; /* 0x08 Command */ + u32 sr; /* 0x0C Status */ + u32 isr; /* 0x10 Interrupt Status */ + u32 imr; /* 0x14 Interrupt Mask */ + u32 dsz; /* 0x1C Data Size */ + u32 inp; /* 0x20 Input FIFO */ + u32 res1[3]; /* 0x24 - 0x2F */ + u32 mda0; /* 0x30 Message Digest AO */ + u32 mdb0; /* 0x34 Message Digest BO */ + u32 mdc0; /* 0x38 Message Digest CO */ + u32 mdd0; /* 0x3C Message Digest DO */ + u32 mde0; /* 0x40 Message Digest EO */ + u32 mdsz; /* 0x44 Message Data Size */ + u32 res[10]; /* 0x48 - 0x6F */ + u32 mda1; /* 0x70 Message Digest A1 */ + u32 mdb1; /* 0x74 Message Digest B1 */ + u32 mdc1; /* 0x78 Message Digest C1 */ + u32 mdd1; /* 0x7C Message Digest D1 */ + u32 mde1; /* 0x80 Message Digest E1 */ +} mdha_t; + +#define MDHA_MR_SSL (0x00000400) +#define MDHA_MR_MACFUL (0x00000200) +#define MDHA_MR_SWAP (0x00000100) +#define MDHA_MR_OPAD (0x00000080) +#define MDHA_MR_IPAD (0x00000040) +#define MDHA_MR_INIT (0x00000020) +#define MDHA_MR_MAC(x) (((x) & 0x03) << 3) +#define MDHA_MR_MAC_MASK (0xFFFFFFE7) +#define MDHA_MR_MAC_EHMAC (0x00000010) +#define MDHA_MR_MAC_HMAC (0x00000008) +#define MDHA_MR_MAC_NONE (0x00000000) +#define MDHA_MR_PDATA (0x00000004) +#define MDHA_MR_ALG (0x00000001) + +#define MDHA_CR_DMAL(x) (((x) & 0x1F) << 16) /* 532x */ +#define MDHA_CR_DMAL_MASK (0xFFE0FFFF) /* 532x */ +#define MDHA_CR_END (0x00000004) /* 532x */ +#define MDHA_CR_DMA (0x00000002) /* 532x */ +#define MDHA_CR_IE (0x00000001) + +#define MDHA_CMD_GO (0x00000008) +#define MDHA_CMD_CI (0x00000004) +#define MDHA_CMD_RI (0x00000001) +#define MDHA_CMD_SWR (0x00000001) + +#define MDHA_SR_IFL(x) (((x) & 0xFF) << 16) +#define MDHA_SR_IFL_MASK (0xFF00FFFF) +#define MDHA_SR_APD(x) (((x) & 0x7) << 13) +#define MDHA_SR_APD_MASK (0xFFFF1FFF) +#define MDHA_SR_FS(x) (((x) & 0x7) << 8) +#define MDHA_SR_FS_MASK (0xFFFFF8FF) +#define MDHA_SR_GNW (0x00000080) +#define MDHA_SR_HSH (0x00000040) +#define MDHA_SR_BUSY (0x00000010) +#define MDHA_SR_RD (0x00000008) +#define MDHA_SR_ERR (0x00000004) +#define MDHA_SR_DONE (0x00000002) +#define MDHA_SR_INT (0x00000001) + +#define MDHA_ISR_DRL (0x00000400) /* 532x */ +#define MDHA_ISR_GTDS (0x00000200) +#define MDHA_ISR_ERE (0x00000100) +#define MDHA_ISR_RMDP (0x00000080) +#define MDHA_ISR_DSE (0x00000020) +#define MDHA_ISR_IME (0x00000010) +#define MDHA_ISR_NEIF (0x00000004) +#define MDHA_ISR_IFO (0x00000001) + +#endif /* __MDHA_H__ */ diff --git a/include/asm-m68k/coldfire/pwm.h b/include/asm-m68k/coldfire/pwm.h new file mode 100644 index 0000000000..f737d98c1f --- /dev/null +++ b/include/asm-m68k/coldfire/pwm.h @@ -0,0 +1,115 @@ +/* + * Pulse Width Modulation Memory Map + * + * Copyright (C) 2004-2008 Freescale Semiconductor, Inc. + * TsiChung Liew (Tsi-Chung.Liew@freescale.com) + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __ATA_H__ +#define __ATA_H__ + +/* Pulse Width Modulation (PWM) */ +typedef struct pwm_ctrl { +#ifdef CONFIG_M5272 + u8 cr0; + u8 res1[3]; + u8 cr1; + u8 res2[3]; + u8 cr2; + u8 res3[7]; + u8 pwr0; + u8 res4[3]; + u8 pwr1; + u8 res5[3]; + u8 pwr2; + u8 res6[7]; +#else + u8 en; /* 0x00 PWM Enable */ + u8 pol; /* 0x01 Polarity */ + u8 clk; /* 0x02 Clock Select */ + u8 prclk; /* 0x03 Prescale Clock Select */ + u8 cae; /* 0x04 Center Align Enable */ + u8 ctl; /* 0x05 Control */ + u16 res1; /* 0x06 - 0x07 */ + u8 scla; /* 0x08 Scale A */ + u8 sclb; /* 0x09 Scale B */ + u16 res2; /* 0x0A - 0x0B */ +#ifdef CONFIG_M5275 + u8 cnt[4]; /* 0x0C Channel n Counter */ + u16 res3; /* 0x10 - 0x11 */ + u8 per[4]; /* 0x14 Channel n Period */ + u16 res4; /* 0x16 - 0x17 */ + u8 dty[4]; /* 0x18 Channel n Duty */ +#else + u8 cnt[8]; /* 0x0C Channel n Counter */ + u8 per[8]; /* 0x14 Channel n Period */ + u8 dty[8]; /* 0x1C Channel n Duty */ + u8 sdn; /* 0x24 Shutdown */ + u8 res3[3]; /* 0x25 - 0x27 */ +#endif /* CONFIG_M5275 */ +#endif /* CONFIG_M5272 */ +} pwm_t; + +#ifdef CONFIG_M5272 + +#define PWM_CR_EN (0x80) +#define PWM_CR_FRC1 (0x40) +#define PWM_CR_LVL (0x20) +#define PWM_CR_CLKSEL(x) ((x) & 0x0F) +#define PWM_CR_CLKSEL_MASK (0xF0) + +#else + +#define PWM_EN_PWMEn(x) (1 << ((x) & 0x07)) +#define PWM_EN_PWMEn_MASK (0xF0) + +#define PWM_POL_PPOLn(x) (1 << ((x) & 0x07)) +#define PWM_POL_PPOLn_MASK (0xF0) + +#define PWM_CLK_PCLKn(x) (1 << ((x) & 0x07)) +#define PWM_CLK_PCLKn_MASK (0xF0) + +#define PWM_PRCLK_PCKB(x) (((x) & 0x07) << 4) +#define PWM_PRCLK_PCKB_MASK (0x8F) +#define PWM_PRCLK_PCKA(x) ((x) & 0x07) +#define PWM_PRCLK_PCKA_MASK (0xF8) + +#define PWM_CLK_PCLKn(x) (1 << ((x) & 0x07)) +#define PWM_CLK_PCLKn_MASK (0xF0) + +#define PWM_CTL_CON67 (0x80) +#define PWM_CTL_CON45 (0x40) +#define PWM_CTL_CON23 (0x20) +#define PWM_CTL_CON01 (0x10) +#define PWM_CTL_PSWAR (0x08) +#define PWM_CTL_PFRZ (0x04) + +#define PWM_SDN_IF (0x80) +#define PWM_SDN_IE (0x40) +#define PWM_SDN_RESTART (0x20) +#define PWM_SDN_LVL (0x10) +#define PWM_SDN_PWM7IN (0x04) +#define PWM_SDN_PWM7IL (0x02) +#define PWM_SDN_SDNEN (0x01) + +#endif /* CONFIG_M5272 */ + +#endif /* __ATA_H__ */ diff --git a/include/asm-m68k/coldfire/qspi.h b/include/asm-m68k/coldfire/qspi.h new file mode 100644 index 0000000000..8bcd2e4db1 --- /dev/null +++ b/include/asm-m68k/coldfire/qspi.h @@ -0,0 +1,111 @@ +/* + * Queue Serial Peripheral Interface Memory Map + * + * Copyright (C) 2004-2007 Freescale Semiconductor, Inc. + * TsiChung Liew (Tsi-Chung.Liew@freescale.com) + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __QSPI_H__ +#define __QSPI_H__ + +/* QSPI module registers */ +typedef struct qspi_ctrl { + u16 mr; /* 0x00 Mode */ + u16 res1; + u16 dlyr; /* 0x04 Delay */ + u16 res2; + u16 wr; /* 0x08 Wrap */ + u16 res3; + u16 ir; /* 0x0C Interrupt */ + u16 res4; + u16 ar; /* 0x10 Address */ + u16 res5; + u16 dr; /* 0x14 Data */ + u16 res6; +} qspi_t; + +/* MR */ +#define QSPI_QMR_MSTR (0x8000) +#define QSPI_QMR_DOHIE (0x4000) +#define QSPI_QMR_BITS(x) (((x)&0x000F)<<10) +#define QSPI_QMR_BITS_MASK (0xC3FF) +#define QSPI_QMR_BITS_8 (0x2000) +#define QSPI_QMR_BITS_9 (0x2400) +#define QSPI_QMR_BITS_10 (0x2800) +#define QSPI_QMR_BITS_11 (0x2C00) +#define QSPI_QMR_BITS_12 (0x3000) +#define QSPI_QMR_BITS_13 (0x3400) +#define QSPI_QMR_BITS_14 (0x3800) +#define QSPI_QMR_BITS_15 (0x3C00) +#define QSPI_QMR_BITS_16 (0x0000) +#define QSPI_QMR_CPOL (0x0200) +#define QSPI_QMR_CPHA (0x0100) +#define QSPI_QMR_BAUD(x) ((x)&0x00FF) +#define QSPI_QMR_BAUD_MASK (0xFF00) + +/* DLYR */ +#define QSPI_QDLYR_SPE (0x8000) +#define QSPI_QDLYR_QCD(x) (((x)&0x007F)<<8) +#define QSPI_QDLYR_QCD_MASK (0x80FF) +#define QSPI_QDLYR_DTL(x) ((x)&0x00FF) +#define QSPI_QDLYR_DTL_MASK (0xFF00) + +/* WR */ +#define QSPI_QWR_HALT (0x8000) +#define QSPI_QWR_WREN (0x4000) +#define QSPI_QWR_WRTO (0x2000) +#define QSPI_QWR_CSIV (0x1000) +#define QSPI_QWR_ENDQP(x) (((x)&0x000F)<<8) +#define QSPI_QWR_ENDQP_MASK (0xF0FF) +#define QSPI_QWR_CPTQP(x) (((x)&0x000F)<<4) +#define QSPI_QWR_CPTQP_MASK (0xFF0F) +#define QSPI_QWR_NEWQP(x) ((x)&0x000F) +#define QSPI_QWR_NEWQP_MASK (0xFFF0) + +/* IR */ +#define QSPI_QIR_WCEFB (0x8000) +#define QSPI_QIR_ABRTB (0x4000) +#define QSPI_QIR_ABRTL (0x1000) +#define QSPI_QIR_WCEFE (0x0800) +#define QSPI_QIR_ABRTE (0x0400) +#define QSPI_QIR_SPIFE (0x0100) +#define QSPI_QIR_WCEF (0x0008) +#define QSPI_QIR_ABRT (0x0004) +#define QSPI_QIR_SPIF (0x0001) + +/* AR */ +#define QSPI_QAR_ADDR(x) ((x)&0x003F) +#define QSPI_QAR_ADDR_MASK (0xFFC0) +#define QSPI_QAR_TRANS (0x0000) +#define QSPI_QAR_RECV (0x0010) +#define QSPI_QAR_CMD (0x0020) + +/* DR */ +#define QSPI_QDR_CONT (0x8000) +#define QSPI_QDR_BITSE (0x4000) +#define QSPI_QDR_DT (0x2000) +#define QSPI_QDR_DSCK (0x1000) +#define QSPI_QDR_QSPI_CS3 (0x0800) +#define QSPI_QDR_QSPI_CS2 (0x0400) +#define QSPI_QDR_QSPI_CS1 (0x0200) +#define QSPI_QDR_QSPI_CS0 (0x0100) + +#endif /* __QSPI_H__ */ diff --git a/include/asm-m68k/coldfire/rng.h b/include/asm-m68k/coldfire/rng.h new file mode 100644 index 0000000000..1eefc56bd4 --- /dev/null +++ b/include/asm-m68k/coldfire/rng.h @@ -0,0 +1,52 @@ +/* + * RNG Memory Map + * + * Copyright (C) 2004-2008 Freescale Semiconductor, Inc. + * TsiChung Liew (Tsi-Chung.Liew@freescale.com) + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __RNG_H__ +#define __RNG_H__ + +/* Random Number Generator */ +typedef struct rng_ctrl { + u32 cr; /* 0x00 Control */ + u32 sr; /* 0x04 Status */ + u32 er; /* 0x08 Entropy */ + u32 out; /* 0x0C Output FIFO */ +} rng_t; + +#define RNG_CR_SLM (0x00000010) /* Sleep mode - 5445x */ +#define RNG_CR_CI (0x00000008) /* Clear interrupt */ +#define RNG_CR_IM (0x00000004) /* Interrupt mask */ +#define RNG_CR_HA (0x00000002) /* High assurance */ +#define RNG_CR_GO (0x00000001) /* Go bit */ + +#define RNG_SR_OFS(x) (((x) & 0x000000FF) << 16) +#define RNG_SR_OFS_MASK (0xFF00FFFF) +#define RNG_SR_OFL(x) (((x) & 0x000000FF) << 8) +#define RNG_SR_OFL_MASK (0xFFFF00FF) +#define RNG_SR_EI (0x00000008) +#define RNG_SR_FUF (0x00000004) +#define RNG_SR_LRS (0x00000002) +#define RNG_SR_SV (0x00000001) + +#endif /* __RNG_H__ */ diff --git a/include/asm-m68k/coldfire/skha.h b/include/asm-m68k/coldfire/skha.h new file mode 100644 index 0000000000..bd6b5af04b --- /dev/null +++ b/include/asm-m68k/coldfire/skha.h @@ -0,0 +1,121 @@ +/* + * Symmetric Key Hardware Accelerator Memory Map + * + * Copyright (C) 2004-2008 Freescale Semiconductor, Inc. + * TsiChung Liew (Tsi-Chung.Liew@freescale.com) + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __SKHA_H__ +#define __SKHA_H__ + +typedef struct skha_ctrl { + u32 mr; /* 0x00 Mode */ + u32 cr; /* 0x04 Control */ + u32 cmr; /* 0x08 Command */ + u32 sr; /* 0x0C Status */ + u32 esr; /* 0x10 Error Status */ + u32 emr; /* 0x14 Error Status Mask Register) */ + u32 ksr; /* 0x18 Key Size */ + u32 dsr; /* 0x1C Data Size */ + u32 in; /* 0x20 Input FIFO */ + u32 out; /* 0x24 Output FIFO */ + u32 res1[2]; /* 0x28 - 0x2F */ + u32 kdr1; /* 0x30 Key Data 1 */ + u32 kdr2; /* 0x34 Key Data 2 */ + u32 kdr3; /* 0x38 Key Data 3 */ + u32 kdr4; /* 0x3C Key Data 4 */ + u32 kdr5; /* 0x40 Key Data 5 */ + u32 kdr6; /* 0x44 Key Data 6 */ + u32 res2[10]; /* 0x48 - 0x6F */ + u32 c1; /* 0x70 Context 1 */ + u32 c2; /* 0x74 Context 2 */ + u32 c3; /* 0x78 Context 3 */ + u32 c4; /* 0x7C Context 4 */ + u32 c5; /* 0x80 Context 5 */ + u32 c6; /* 0x84 Context 6 */ + u32 c7; /* 0x88 Context 7 */ + u32 c8; /* 0x8C Context 8 */ + u32 c9; /* 0x90 Context 9 */ + u32 c10; /* 0x94 Context 10 */ + u32 c11; /* 0x98 Context 11 */ + u32 c12; /* 0x9C Context 12 - 5235, 5271, 5272 */ +} skha_t; + +#ifdef CONFIG_MCF532x +#define SKHA_MODE_CTRM(x) (((x) & 0x0F) << 9) +#define SKHA_MODE_CTRM_MASK (0xFFFFE1FF) +#define SKHA_MODE_DKP (0x00000100) +#else +#define SKHA_MODE_CTRM(x) (((x) & 0x0F) << 8) +#define SKHA_MODE_CTRM_MASK (0xFFFFF0FF) +#define SKHA_MODE_DKP (0x00000080) +#endif +#define SKHA_MODE_CM(x) (((x) & 0x03) << 3) +#define SKHA_MODE_CM_MASK (0xFFFFFFE7) +#define SKHA_MODE_DIR (0x00000004) +#define SKHA_MODE_ALG(x) ((x) & 0x03) +#define SKHA_MODE_ALG_MASK (0xFFFFFFFC) + +#define SHKA_CR_ODMAL(x) (((x) & 0x3F) << 24) +#define SHKA_CR_ODMAL_MASK (0xC0FFFFFF) +#define SHKA_CR_IDMAL(x) (((x) & 0x3F) << 16) +#define SHKA_CR_IDMAL_MASK (0xFFC0FFFF) +#define SHKA_CR_END (0x00000008) +#define SHKA_CR_ODMA (0x00000004) +#define SHKA_CR_IDMA (0x00000002) +#define SKHA_CR_IE (0x00000001) + +#define SKHA_CMR_GO (0x00000008) +#define SKHA_CMR_CI (0x00000004) +#define SKHA_CMR_RI (0x00000002) +#define SKHA_CMR_SWR (0x00000001) + +#define SKHA_SR_OFL(x) (((x) & 0xFF) << 24) +#define SKHA_SR_OFL_MASK (0x00FFFFFF) +#define SKHA_SR_IFL(x) (((x) & 0xFF) << 16) +#define SKHA_SR_IFL_MASK (0xFF00FFFF) +#define SKHA_SR_AESES(x) (((x) & 0x1F) << 11) +#define SKHA_SR_AESES_MASK (0xFFFF07FF) +#define SKHA_SR_DESES(x) (((x) & 0x7) << 8) +#define SKHA_SR_DESES_MASK (0xFFFFF8FF) +#define SKHA_SR_BUSY (0x00000010) +#define SKHA_SR_RD (0x00000008) +#define SKHA_SR_ERR (0x00000004) +#define SKHA_SR_DONE (0x00000002) +#define SKHA_SR_INT (0x00000001) + +#define SHKA_ESE_DRL (0x00000800) +#define SKHA_ESR_KRE (0x00000400) +#define SKHA_ESR_KPE (0x00000200) +#define SKHA_ESR_ERE (0x00000100) +#define SKHA_ESR_RMDP (0x00000080) +#define SKHA_ESR_KSE (0x00000040) +#define SKHA_ESR_DSE (0x00000020) +#define SKHA_ESR_IME (0x00000010) +#define SKHA_ESR_NEOF (0x00000008) +#define SKHA_ESR_NEIF (0x00000004) +#define SKHA_ESR_OFU (0x00000002) +#define SKHA_ESR_IFO (0x00000001) + +#define SKHA_KSR_SZ(x) ((x) & 0x3F) +#define SKHA_KSR_SZ_MASK (0xFFFFFFC0) + +#endif /* __SKHA_H__ */ diff --git a/include/asm-m68k/coldfire/ssi.h b/include/asm-m68k/coldfire/ssi.h index 105c4751d5..b3dfbfab6b 100644 --- a/include/asm-m68k/coldfire/ssi.h +++ b/include/asm-m68k/coldfire/ssi.h @@ -26,10 +26,6 @@ #ifndef __SSI_H__ #define __SSI_H__ -/********************************************************************* -* Synchronous Serial Interface (SSI) -*********************************************************************/ - typedef struct ssi { u32 tx0; u32 tx1; @@ -52,14 +48,10 @@ typedef struct ssi { u32 rmask; } ssi_t; -/********************************************************************* -* Synchronous Serial Interface (SSI) -*********************************************************************/ - -/* Bit definitions and macros for SSI_CR */ #define SSI_CR_CIS (0x00000200) #define SSI_CR_TCH (0x00000100) #define SSI_CR_MCE (0x00000080) +#define SSI_CR_I2S_MASK (0xFFFFFF9F) #define SSI_CR_I2S_SLAVE (0x00000040) #define SSI_CR_I2S_MASTER (0x00000020) #define SSI_CR_I2S_NORMAL (0x00000000) @@ -69,7 +61,6 @@ typedef struct ssi { #define SSI_CR_TE (0x00000002) #define SSI_CR_SSI_EN (0x00000001) -/* Bit definitions and macros for SSI_ISR */ #define SSI_ISR_CMDAU (0x00040000) #define SSI_ISR_CMDDU (0x00020000) #define SSI_ISR_RXT (0x00010000) @@ -90,7 +81,6 @@ typedef struct ssi { #define SSI_ISR_TFE1 (0x00000002) #define SSI_ISR_TFE0 (0x00000001) -/* Bit definitions and macros for SSI_IER */ #define SSI_IER_RDMAE (0x00400000) #define SSI_IER_RIE (0x00200000) #define SSI_IER_TDMAE (0x00100000) @@ -115,7 +105,6 @@ typedef struct ssi { #define SSI_IER_TFE1 (0x00000002) #define SSI_IER_TFE0 (0x00000001) -/* Bit definitions and macros for SSI_TCR */ #define SSI_TCR_TXBIT0 (0x00000200) #define SSI_TCR_TFEN1 (0x00000100) #define SSI_TCR_TFEN0 (0x00000080) @@ -127,7 +116,6 @@ typedef struct ssi { #define SSI_TCR_TFSL (0x00000002) #define SSI_TCR_TEFS (0x00000001) -/* Bit definitions and macros for SSI_RCR */ #define SSI_RCR_RXEXT (0x00000400) #define SSI_RCR_RXBIT0 (0x00000200) #define SSI_RCR_RFEN1 (0x00000100) @@ -138,38 +126,44 @@ typedef struct ssi { #define SSI_RCR_RFSL (0x00000002) #define SSI_RCR_REFS (0x00000001) -/* Bit definitions and macros for SSI_CCR */ #define SSI_CCR_DIV2 (0x00040000) #define SSI_CCR_PSR (0x00020000) -#define SSI_CCR_WL(x) (((x)&0x0000000F)<<13) -#define SSI_CCR_DC(x) (((x)&0x0000001F)<<8) -#define SSI_CCR_PM(x) ((x)&0x000000FF) - -/* Bit definitions and macros for SSI_FCSR */ -#define SSI_FCSR_RFCNT1(x) (((x)&0x0000000F)<<28) -#define SSI_FCSR_TFCNT1(x) (((x)&0x0000000F)<<24) -#define SSI_FCSR_RFWM1(x) (((x)&0x0000000F)<<20) -#define SSI_FCSR_TFWM1(x) (((x)&0x0000000F)<<16) -#define SSI_FCSR_RFCNT0(x) (((x)&0x0000000F)<<12) -#define SSI_FCSR_TFCNT0(x) (((x)&0x0000000F)<<8) -#define SSI_FCSR_RFWM0(x) (((x)&0x0000000F)<<4) -#define SSI_FCSR_TFWM0(x) ((x)&0x0000000F) - -/* Bit definitions and macros for SSI_ACR */ -#define SSI_ACR_FRDIV(x) (((x)&0x0000003F)<<5) +#define SSI_CCR_WL(x) (((x) & 0x0F) << 13) +#define SSI_CCR_WL_MASK (0xFFFE1FFF) +#define SSI_CCR_DC(x) (((x)& 0x1F) << 8) +#define SSI_CCR_DC_MASK (0xFFFFE0FF) +#define SSI_CCR_PM(x) ((x) & 0xFF) +#define SSI_CCR_PM_MASK (0xFFFFFF00) + +#define SSI_FCSR_RFCNT1(x) (((x) & 0x0F) << 28) +#define SSI_FCSR_RFCNT1_MASK (0x0FFFFFFF) +#define SSI_FCSR_TFCNT1(x) (((x) & 0x0F) << 24) +#define SSI_FCSR_TFCNT1_MASK (0xF0FFFFFF) +#define SSI_FCSR_RFWM1(x) (((x) & 0x0F) << 20) +#define SSI_FCSR_RFWM1_MASK (0xFF0FFFFF) +#define SSI_FCSR_TFWM1(x) (((x) & 0x0F) << 16) +#define SSI_FCSR_TFWM1_MASK (0xFFF0FFFF) +#define SSI_FCSR_RFCNT0(x) (((x) & 0x0F) << 12) +#define SSI_FCSR_RFCNT0_MASK (0xFFFF0FFF) +#define SSI_FCSR_TFCNT0(x) (((x) & 0x0F) << 8) +#define SSI_FCSR_TFCNT0_MASK (0xFFFFF0FF) +#define SSI_FCSR_RFWM0(x) (((x) & 0x0F) << 4) +#define SSI_FCSR_RFWM0_MASK (0xFFFFFF0F) +#define SSI_FCSR_TFWM0(x) ((x) & 0x0F) +#define SSI_FCSR_TFWM0_MASK (0xFFFFFFF0) + +#define SSI_ACR_FRDIV(x) (((x) & 0x3F) << 5) +#define SSI_ACR_FRDIV_MASK (0xFFFFF81F) #define SSI_ACR_WR (0x00000010) #define SSI_ACR_RD (0x00000008) #define SSI_ACR_TIF (0x00000004) #define SSI_ACR_FV (0x00000002) #define SSI_ACR_AC97EN (0x00000001) -/* Bit definitions and macros for SSI_ACADD */ -#define SSI_ACADD_SSI_ACADD(x) ((x)&0x0007FFFF) +#define SSI_ACADD_SSI_ACADD(x) ((x) & 0x0007FFFF) -/* Bit definitions and macros for SSI_ACDAT */ -#define SSI_ACDAT_SSI_ACDAT(x) ((x)&0x0007FFFF) +#define SSI_ACDAT_SSI_ACDAT(x) ((x) & 0x0007FFFF) -/* Bit definitions and macros for SSI_ATAG */ -#define SSI_ATAG_DDI_ATAG(x) ((x)&0x0000FFFF) +#define SSI_ATAG_DDI_ATAG(x) ((x) & 0x0000FFFF) #endif /* __SSI_H__ */ diff --git a/include/asm-m68k/fec.h b/include/asm-m68k/fec.h index e639599024..49311e596f 100644 --- a/include/asm-m68k/fec.h +++ b/include/asm-m68k/fec.h @@ -351,4 +351,16 @@ typedef struct fec { #define FEC_RESET_DELAY 100 #define FEC_RX_TOUT 100 +int fecpin_setclear(struct eth_device *dev, int setclear); + +#ifdef CONFIG_SYS_DISCOVER_PHY +void __mii_init(void); +uint mii_send(uint mii_cmd); +int mii_discover_phy(struct eth_device *dev); +int mcffec_miiphy_read(char *devname, unsigned char addr, + unsigned char reg, unsigned short *value); +int mcffec_miiphy_write(char *devname, unsigned char addr, + unsigned char reg, unsigned short value); +#endif + #endif /* fec_h */ diff --git a/include/asm-m68k/fsl_mcdmafec.h b/include/asm-m68k/fsl_mcdmafec.h index 82da5931ee..7e540567aa 100644 --- a/include/asm-m68k/fsl_mcdmafec.h +++ b/include/asm-m68k/fsl_mcdmafec.h @@ -164,13 +164,4 @@ struct fec_info_dma { #define FIFO_CTRL_UFMASK (0x00100000) #define FIFO_CTRL_OFMASK (0x00080000) -int fecpin_setclear(struct eth_device *dev, int setclear); -void mii_init(void); -uint mii_send(uint mii_cmd); -int mii_discover_phy(struct eth_device *dev); -int mcffec_miiphy_read(char *devname, unsigned char addr, - unsigned char reg, unsigned short *value); -int mcffec_miiphy_write(char *devname, unsigned char addr, - unsigned char reg, unsigned short value); - #endif /* fsl_mcdmafec_h */ diff --git a/include/asm-m68k/immap.h b/include/asm-m68k/immap.h index ccd7c2be81..93f730f6d4 100644 --- a/include/asm-m68k/immap.h +++ b/include/asm-m68k/immap.h @@ -227,6 +227,38 @@ #endif #endif /* CONFIG_M5282 */ +#if defined(CONFIG_MCF5301x) +#include <asm/immap_5301x.h> +#include <asm/m5301x.h> + +#define CONFIG_SYS_FEC0_IOBASE (MMAP_FEC0) +#define CONFIG_SYS_FEC1_IOBASE (MMAP_FEC1) +#define CONFIG_SYS_UART_BASE (MMAP_UART0 + (CONFIG_SYS_UART_PORT * 0x4000)) + +#define CONFIG_SYS_MCFRTC_BASE (MMAP_RTC) + +/* Timer */ +#ifdef CONFIG_MCFTMR +#define CONFIG_SYS_UDELAY_BASE (MMAP_DTMR0) +#define CONFIG_SYS_TMR_BASE (MMAP_DTMR1) +#define CONFIG_SYS_TMRPND_REG (((volatile int0_t *)(CONFIG_SYS_INTR_BASE))->iprh0) +#define CONFIG_SYS_TMRINTR_NO (INT0_HI_DTMR1) +#define CONFIG_SYS_TMRINTR_MASK (INTC_IPRH_INT33) +#define CONFIG_SYS_TMRINTR_PEND (CONFIG_SYS_TMRINTR_MASK) +#define CONFIG_SYS_TMRINTR_PRI (6) +#define CONFIG_SYS_TIMER_PRESCALER (((gd->bus_clk / 1000000) - 1) << 8) +#endif + +#ifdef CONFIG_MCFPIT +#define CONFIG_SYS_UDELAY_BASE (MMAP_PIT0) +#define CONFIG_SYS_PIT_BASE (MMAP_PIT1) +#define CONFIG_SYS_PIT_PRESCALE (6) +#endif + +#define CONFIG_SYS_INTR_BASE (MMAP_INTC0) +#define CONFIG_SYS_NUM_IRQS (128) +#endif /* CONFIG_M5301x */ + #if defined(CONFIG_M5329) || defined(CONFIG_M5373) #include <asm/immap_5329.h> #include <asm/m5329.h> diff --git a/include/asm-m68k/immap_5227x.h b/include/asm-m68k/immap_5227x.h index 83da3d5f76..6f65f50307 100644 --- a/include/asm-m68k/immap_5227x.h +++ b/include/asm-m68k/immap_5227x.h @@ -69,109 +69,14 @@ #include <asm/coldfire/crossbar.h> #include <asm/coldfire/dspi.h> #include <asm/coldfire/edma.h> +#include <asm/coldfire/eport.h> #include <asm/coldfire/flexbus.h> +#include <asm/coldfire/flexcan.h> +#include <asm/coldfire/intctrl.h> #include <asm/coldfire/lcd.h> +#include <asm/coldfire/pwm.h> #include <asm/coldfire/ssi.h> -/* Interrupt Controller (INTC) */ -typedef struct int0_ctrl { - u32 iprh0; /* 0x00 Pending Register High */ - u32 iprl0; /* 0x04 Pending Register Low */ - u32 imrh0; /* 0x08 Mask Register High */ - u32 imrl0; /* 0x0C Mask Register Low */ - u32 frch0; /* 0x10 Force Register High */ - u32 frcl0; /* 0x14 Force Register Low */ - u16 res1; /* 0x18 - 0x19 */ - u16 icfg0; /* 0x1A Configuration Register */ - u8 simr0; /* 0x1C Set Interrupt Mask */ - u8 cimr0; /* 0x1D Clear Interrupt Mask */ - u8 clmask0; /* 0x1E Current Level Mask */ - u8 slmask; /* 0x1F Saved Level Mask */ - u32 res2[8]; /* 0x20 - 0x3F */ - u8 icr0[64]; /* 0x40 - 0x7F Control registers */ - u32 res3[24]; /* 0x80 - 0xDF */ - u8 swiack0; /* 0xE0 Software Interrupt ack */ - u8 res4[3]; /* 0xE1 - 0xE3 */ - u8 Lniack0_1; /* 0xE4 Level n interrupt ack */ - u8 res5[3]; /* 0xE5 - 0xE7 */ - u8 Lniack0_2; /* 0xE8 Level n interrupt ack */ - u8 res6[3]; /* 0xE9 - 0xEB */ - u8 Lniack0_3; /* 0xEC Level n interrupt ack */ - u8 res7[3]; /* 0xED - 0xEF */ - u8 Lniack0_4; /* 0xF0 Level n interrupt ack */ - u8 res8[3]; /* 0xF1 - 0xF3 */ - u8 Lniack0_5; /* 0xF4 Level n interrupt ack */ - u8 res9[3]; /* 0xF5 - 0xF7 */ - u8 Lniack0_6; /* 0xF8 Level n interrupt ack */ - u8 resa[3]; /* 0xF9 - 0xFB */ - u8 Lniack0_7; /* 0xFC Level n interrupt ack */ - u8 resb[3]; /* 0xFD - 0xFF */ -} int0_t; - -typedef struct int1_ctrl { - /* Interrupt Controller 1 */ - u32 iprh1; /* 0x00 Pending Register High */ - u32 iprl1; /* 0x04 Pending Register Low */ - u32 imrh1; /* 0x08 Mask Register High */ - u32 imrl1; /* 0x0C Mask Register Low */ - u32 frch1; /* 0x10 Force Register High */ - u32 frcl1; /* 0x14 Force Register Low */ - u16 res1; /* 0x18 */ - u16 icfg1; /* 0x1A Configuration Register */ - u8 simr1; /* 0x1C Set Interrupt Mask */ - u8 cimr1; /* 0x1D Clear Interrupt Mask */ - u16 res2; /* 0x1E - 0x1F */ - u32 res3[8]; /* 0x20 - 0x3F */ - u8 icr1[64]; /* 0x40 - 0x7F */ - u32 res4[24]; /* 0x80 - 0xDF */ - u8 swiack1; /* 0xE0 Software Interrupt ack */ - u8 res5[3]; /* 0xE1 - 0xE3 */ - u8 Lniack1_1; /* 0xE4 Level n interrupt ack */ - u8 res6[3]; /* 0xE5 - 0xE7 */ - u8 Lniack1_2; /* 0xE8 Level n interrupt ack */ - u8 res7[3]; /* 0xE9 - 0xEB */ - u8 Lniack1_3; /* 0xEC Level n interrupt ack */ - u8 res8[3]; /* 0xED - 0xEF */ - u8 Lniack1_4; /* 0xF0 Level n interrupt ack */ - u8 res9[3]; /* 0xF1 - 0xF3 */ - u8 Lniack1_5; /* 0xF4 Level n interrupt ack */ - u8 resa[3]; /* 0xF5 - 0xF7 */ - u8 Lniack1_6; /* 0xF8 Level n interrupt ack */ - u8 resb[3]; /* 0xF9 - 0xFB */ - u8 Lniack1_7; /* 0xFC Level n interrupt ack */ - u8 resc[3]; /* 0xFD - 0xFF */ -} int1_t; - -/* Global Interrupt Acknowledge (IACK) */ -typedef struct iack { - u8 resv0[0xE0]; - u8 gswiack; - u8 resv1[0x3]; - u8 gl1iack; - u8 resv2[0x3]; - u8 gl2iack; - u8 resv3[0x3]; - u8 gl3iack; - u8 resv4[0x3]; - u8 gl4iack; - u8 resv5[0x3]; - u8 gl5iack; - u8 resv6[0x3]; - u8 gl6iack; - u8 resv7[0x3]; - u8 gl7iack; -} iack_t; - -/* Edge Port Module (EPORT) */ -typedef struct eport { - u16 eppar; - u8 epddr; - u8 epier; - u8 epdr; - u8 eppdr; - u8 epfr; -} eport_t; - /* Reset Controller Module (RCM) */ typedef struct rcm { u8 rcr; @@ -193,6 +98,12 @@ typedef struct ccm { u16 sbfcr; /* Serial Boot Control */ } ccm_t; +typedef struct canex_ctrl { + can_msg_t msg[16]; /* 0x00 Message Buffer 0-15 */ + u32 res0[0x700]; /* 0x100 */ + can_msg_t rxim[16]; /* 0x800 Rx Individual Mask 0-15 */ +} canex_t; + /* General Purpose I/O Module (GPIO) */ typedef struct gpio { /* Port Output Data Registers */ diff --git a/include/asm-m68k/immap_5235.h b/include/asm-m68k/immap_5235.h index 3ef0321082..f7f35fcb9f 100644 --- a/include/asm-m68k/immap_5235.h +++ b/include/asm-m68k/immap_5235.h @@ -63,6 +63,15 @@ #define MMAP_ETPU (CONFIG_SYS_MBAR + 0x001D0000) #define MMAP_CAN2 (CONFIG_SYS_MBAR + 0x001F0000) +#include <asm/coldfire/eport.h> +#include <asm/coldfire/flexbus.h> +#include <asm/coldfire/flexcan.h> +#include <asm/coldfire/intctrl.h> +#include <asm/coldfire/mdha.h> +#include <asm/coldfire/qspi.h> +#include <asm/coldfire/rng.h> +#include <asm/coldfire/skha.h> + /* System Control Module register */ typedef struct scm_ctrl { u32 ipsbar; /* 0x00 - MBAR */ @@ -104,141 +113,9 @@ typedef struct sdram_ctrl { u32 dmr1; /* 0x14 mask register block 1 */ } sdram_t; -/* Flexbus module Chip select registers */ -typedef struct fbcs_ctrl { - u16 csar0; /* 0x00 Chip-Select Address Register 0 */ - u16 res0; - u32 csmr0; /* 0x04 Chip-Select Mask Register 0 */ - u16 res1; /* 0x08 */ - u16 cscr0; /* 0x0A Chip-Select Control Register 0 */ - - u16 csar1; /* 0x0C Chip-Select Address Register 1 */ - u16 res2; - u32 csmr1; /* 0x10 Chip-Select Mask Register 1 */ - u16 res3; /* 0x14 */ - u16 cscr1; /* 0x16 Chip-Select Control Register 1 */ - - u16 csar2; /* 0x18 Chip-Select Address Register 2 */ - u16 res4; - u32 csmr2; /* 0x1C Chip-Select Mask Register 2 */ - u16 res5; /* 0x20 */ - u16 cscr2; /* 0x22 Chip-Select Control Register 2 */ - - u16 csar3; /* 0x24 Chip-Select Address Register 3 */ - u16 res6; - u32 csmr3; /* 0x28 Chip-Select Mask Register 3 */ - u16 res7; /* 0x2C */ - u16 cscr3; /* 0x2E Chip-Select Control Register 3 */ - - u16 csar4; /* 0x30 Chip-Select Address Register 4 */ - u16 res8; - u32 csmr4; /* 0x34 Chip-Select Mask Register 4 */ - u16 res9; /* 0x38 */ - u16 cscr4; /* 0x3A Chip-Select Control Register 4 */ - - u16 csar5; /* 0x3C Chip-Select Address Register 5 */ - u16 res10; - u32 csmr5; /* 0x40 Chip-Select Mask Register 5 */ - u16 res11; /* 0x44 */ - u16 cscr5; /* 0x46 Chip-Select Control Register 5 */ - - u16 csar6; /* 0x48 Chip-Select Address Register 5 */ - u16 res12; - u32 csmr6; /* 0x4C Chip-Select Mask Register 5 */ - u16 res13; /* 0x50 */ - u16 cscr6; /* 0x52 Chip-Select Control Register 5 */ - - u16 csar7; /* 0x54 Chip-Select Address Register 5 */ - u16 res14; - u32 csmr7; /* 0x58 Chip-Select Mask Register 5 */ - u16 res15; /* 0x5C */ - u16 cscr7; /* 0x5E Chip-Select Control Register 5 */ -} fbcs_t; - -/* QSPI module registers */ -typedef struct qspi_ctrl { - u16 qmr; /* Mode register */ - u16 res1; - u16 qdlyr; /* Delay register */ - u16 res2; - u16 qwr; /* Wrap register */ - u16 res3; - u16 qir; /* Interrupt register */ - u16 res4; - u16 qar; /* Address register */ - u16 res5; - u16 qdr; /* Data register */ - u16 res6; -} qspi_t; - -/* Interrupt module registers */ -typedef struct int0_ctrl { - /* Interrupt Controller 0 */ - u32 iprh0; /* 0x00 Pending Register High */ - u32 iprl0; /* 0x04 Pending Register Low */ - u32 imrh0; /* 0x08 Mask Register High */ - u32 imrl0; /* 0x0C Mask Register Low */ - u32 frch0; /* 0x10 Force Register High */ - u32 frcl0; /* 0x14 Force Register Low */ - u8 irlr; /* 0x18 */ - u8 iacklpr; /* 0x19 */ - u16 res1[19]; /* 0x1a - 0x3c */ - u8 icr0[64]; /* 0x40 - 0x7F Control registers */ - u32 res3[24]; /* 0x80 - 0xDF */ - u8 swiack0; /* 0xE0 Software Interrupt Acknowledge */ - u8 res4[3]; /* 0xE1 - 0xE3 */ - u8 Lniack0_1; /* 0xE4 Level n interrupt acknowledge resister */ - u8 res5[3]; /* 0xE5 - 0xE7 */ - u8 Lniack0_2; /* 0xE8 Level n interrupt acknowledge resister */ - u8 res6[3]; /* 0xE9 - 0xEB */ - u8 Lniack0_3; /* 0xEC Level n interrupt acknowledge resister */ - u8 res7[3]; /* 0xED - 0xEF */ - u8 Lniack0_4; /* 0xF0 Level n interrupt acknowledge resister */ - u8 res8[3]; /* 0xF1 - 0xF3 */ - u8 Lniack0_5; /* 0xF4 Level n interrupt acknowledge resister */ - u8 res9[3]; /* 0xF5 - 0xF7 */ - u8 Lniack0_6; /* 0xF8 Level n interrupt acknowledge resister */ - u8 resa[3]; /* 0xF9 - 0xFB */ - u8 Lniack0_7; /* 0xFC Level n interrupt acknowledge resister */ - u8 resb[3]; /* 0xFD - 0xFF */ -} int0_t; - -typedef struct int1_ctrl { - /* Interrupt Controller 1 */ - u32 iprh1; /* 0x00 Pending Register High */ - u32 iprl1; /* 0x04 Pending Register Low */ - u32 imrh1; /* 0x08 Mask Register High */ - u32 imrl1; /* 0x0C Mask Register Low */ - u32 frch1; /* 0x10 Force Register High */ - u32 frcl1; /* 0x14 Force Register Low */ - u8 irlr; /* 0x18 */ - u8 iacklpr; /* 0x19 */ - u16 res1[19]; /* 0x1a - 0x3c */ - u8 icr1[64]; /* 0x40 - 0x7F */ - u32 res4[24]; /* 0x80 - 0xDF */ - u8 swiack1; /* 0xE0 Software Interrupt Acknowledge */ - u8 res5[3]; /* 0xE1 - 0xE3 */ - u8 Lniack1_1; /* 0xE4 Level n interrupt acknowledge resister */ - u8 res6[3]; /* 0xE5 - 0xE7 */ - u8 Lniack1_2; /* 0xE8 Level n interrupt acknowledge resister */ - u8 res7[3]; /* 0xE9 - 0xEB */ - u8 Lniack1_3; /* 0xEC Level n interrupt acknowledge resister */ - u8 res8[3]; /* 0xED - 0xEF */ - u8 Lniack1_4; /* 0xF0 Level n interrupt acknowledge resister */ - u8 res9[3]; /* 0xF1 - 0xF3 */ - u8 Lniack1_5; /* 0xF4 Level n interrupt acknowledge resister */ - u8 resa[3]; /* 0xF5 - 0xF7 */ - u8 Lniack1_6; /* 0xF8 Level n interrupt acknowledge resister */ - u8 resb[3]; /* 0xF9 - 0xFB */ - u8 Lniack1_7; /* 0xFC Level n interrupt acknowledge resister */ - u8 resc[3]; /* 0xFD - 0xFF */ -} int1_t; - -typedef struct intgack_ctrl1 { - /* Global IACK Registers */ - u8 swiack; /* 0xE0 Global Software Interrupt Acknowledge */ - u8 Lniack[7]; /* 0xE1 - 0xE7 Global Level 0 Interrupt Acknowledge */ -} intgack_t; +typedef struct canex_ctrl { + can_msg_t msg[16]; /* 0x00 Message Buffer 0-15 */ +} canex_t; /* GPIO port registers */ typedef struct gpio_ctrl { @@ -356,23 +233,4 @@ typedef struct wdog_ctrl { u16 sr; /* 0x06 Service register */ } wdog_t; -/* FlexCan module registers */ -typedef struct can_ctrl { - u32 mcr; /* 0x00 Module Configuration register */ - u32 ctrl; /* 0x04 Control register */ - u32 timer; /* 0x08 Free Running Timer */ - u32 res1; /* 0x0C */ - u32 rxgmask; /* 0x10 Rx Global Mask */ - u32 rx14mask; /* 0x14 RxBuffer 14 Mask */ - u32 rx15mask; /* 0x18 RxBuffer 15 Mask */ - u32 errcnt; /* 0x1C Error Counter Register */ - u32 errstat; /* 0x20 Error and status Register */ - u32 res2; /* 0x24 */ - u32 imask; /* 0x28 Interrupt Mask Register */ - u32 res3; /* 0x2C */ - u32 iflag; /* 0x30 Interrupt Flag Register */ - u32 res4[19]; /* 0x34 - 0x7F */ - u32 MB0_15[2048]; /* 0x80 Message Buffer 0-15 */ -} can_t; - #endif /* __IMMAP_5235__ */ diff --git a/include/asm-m68k/immap_5249.h b/include/asm-m68k/immap_5249.h index 6b57ba7a5c..02420869e8 100644 --- a/include/asm-m68k/immap_5249.h +++ b/include/asm-m68k/immap_5249.h @@ -26,10 +26,14 @@ #define __IMMAP_5249__ #define MMAP_INTC (CONFIG_SYS_MBAR + 0x00000040) +#define MMAP_FBCS (CONFIG_SYS_MBAR + 0x00000080) #define MMAP_DTMR0 (CONFIG_SYS_MBAR + 0x00000140) #define MMAP_DTMR1 (CONFIG_SYS_MBAR + 0x00000180) #define MMAP_UART0 (CONFIG_SYS_MBAR + 0x000001C0) #define MMAP_UART1 (CONFIG_SYS_MBAR + 0x00000200) #define MMAP_QSPI (CONFIG_SYS_MBAR + 0x00000400) +#include <asm/coldfire/flexbus.h> +#include <asm/coldfire/qspi.h> + #endif /* __IMMAP_5249__ */ diff --git a/include/asm-m68k/immap_5253.h b/include/asm-m68k/immap_5253.h index 4e3a481555..b5a4cb54a7 100644 --- a/include/asm-m68k/immap_5253.h +++ b/include/asm-m68k/immap_5253.h @@ -23,10 +23,11 @@ * MA 02111-1307 USA */ -#ifndef __IMMAP_5249__ -#define __IMMAP_5249__ +#ifndef __IMMAP_5253__ +#define __IMMAP_5253__ #define MMAP_INTC (CONFIG_SYS_MBAR + 0x00000040) +#define MMAP_FBCS (CONFIG_SYS_MBAR + 0x00000080) #define MMAP_DTMR0 (CONFIG_SYS_MBAR + 0x00000140) #define MMAP_DTMR1 (CONFIG_SYS_MBAR + 0x00000180) #define MMAP_UART0 (CONFIG_SYS_MBAR + 0x000001C0) @@ -39,57 +40,13 @@ #define MMAP_I2C1 (CONFIG_SYS_MBAR2 + 0x00000440) #define MMAP_UART2 (CONFIG_SYS_MBAR2 + 0x00000C00) -/********************************************************************* -* ATA Module (ATAC) -*********************************************************************/ +#include <asm/coldfire/ata.h> +#include <asm/coldfire/flexbus.h> +#include <asm/coldfire/flexcan.h> +#include <asm/coldfire/qspi.h> -/* Register read/write struct */ -typedef struct atac { - /* PIO */ - u8 toff; /* 0x00 */ - u8 ton; /* 0x01 */ - u8 t1; /* 0x02 */ - u8 t2w; /* 0x03 */ - u8 t2r; /* 0x04 */ - u8 ta; /* 0x05 */ - u8 trd; /* 0x06 */ - u8 t4; /* 0x07 */ - u8 t9; /* 0x08 */ +typedef struct canex_ctrl { + can_msg_t msg[32]; /* 0x80 Message Buffer 0-31 */ +} canex_t; - /* DMA */ - u8 tm; /* 0x09 */ - u8 tn; /* 0x0A */ - u8 td; /* 0x0B */ - u8 tk; /* 0x0C */ - u8 tack; /* 0x0D */ - u8 tenv; /* 0x0E */ - u8 trp; /* 0x0F */ - u8 tzah; /* 0x10 */ - u8 tmli; /* 0x11 */ - u8 tdvh; /* 0x12 */ - u8 tdzfs; /* 0x13 */ - u8 tdvs; /* 0x14 */ - u8 tcvh; /* 0x15 */ - u8 tss; /* 0x16 */ - u8 tcyc; /* 0x17 */ - - /* FIFO */ - u32 fifo32; /* 0x18 */ - u16 fifo16; /* 0x1C */ - u8 rsvd0[2]; - u8 ffill; /* 0x20 */ - u8 rsvd1[3]; - - /* ATA */ - u8 cr; /* 0x24 */ - u8 rsvd2[3]; - u8 isr; /* 0x28 */ - u8 rsvd3[3]; - u8 ier; /* 0x2C */ - u8 rsvd4[3]; - u8 icr; /* 0x30 */ - u8 rsvd5[3]; - u8 falarm; /* 0x34 */ -} atac_t; - -#endif /* __IMMAP_5249__ */ +#endif /* __IMMAP_5253__ */ diff --git a/include/asm-m68k/immap_5271.h b/include/asm-m68k/immap_5271.h index 462d5f2b44..8ddec5c566 100644 --- a/include/asm-m68k/immap_5271.h +++ b/include/asm-m68k/immap_5271.h @@ -63,36 +63,13 @@ #define MMAP_ETPU (CONFIG_SYS_MBAR + 0x001D0000) #define MMAP_CAN2 (CONFIG_SYS_MBAR + 0x001F0000) -/* Interrupt module registers */ -typedef struct int0_ctrl { - /* Interrupt Controller 0 */ - u32 iprh0; /* 0x00 Pending Register High */ - u32 iprl0; /* 0x04 Pending Register Low */ - u32 imrh0; /* 0x08 Mask Register High */ - u32 imrl0; /* 0x0C Mask Register Low */ - u32 frch0; /* 0x10 Force Register High */ - u32 frcl0; /* 0x14 Force Register Low */ - u8 irlr; /* 0x18 */ - u8 iacklpr; /* 0x19 */ - u16 res1[19]; /* 0x1a - 0x3c */ - u8 icr0[64]; /* 0x40 - 0x7F Control registers */ - u32 res3[24]; /* 0x80 - 0xDF */ - u8 swiack0; /* 0xE0 Software Interrupt Acknowledge */ - u8 res4[3]; /* 0xE1 - 0xE3 */ - u8 Lniack0_1; /* 0xE4 Level n interrupt acknowledge resister */ - u8 res5[3]; /* 0xE5 - 0xE7 */ - u8 Lniack0_2; /* 0xE8 Level n interrupt acknowledge resister */ - u8 res6[3]; /* 0xE9 - 0xEB */ - u8 Lniack0_3; /* 0xEC Level n interrupt acknowledge resister */ - u8 res7[3]; /* 0xED - 0xEF */ - u8 Lniack0_4; /* 0xF0 Level n interrupt acknowledge resister */ - u8 res8[3]; /* 0xF1 - 0xF3 */ - u8 Lniack0_5; /* 0xF4 Level n interrupt acknowledge resister */ - u8 res9[3]; /* 0xF5 - 0xF7 */ - u8 Lniack0_6; /* 0xF8 Level n interrupt acknowledge resister */ - u8 resa[3]; /* 0xF9 - 0xFB */ - u8 Lniack0_7; /* 0xFC Level n interrupt acknowledge resister */ - u8 resb[3]; /* 0xFD - 0xFF */ -} int0_t; +#include <asm/coldfire/eport.h> +#include <asm/coldfire/flexbus.h> +#include <asm/coldfire/intctrl.h> +#include <asm/coldfire/mdha.h> +#include <asm/coldfire/qspi.h> +#include <asm/coldfire/rng.h> +#include <asm/coldfire/skha.h> + #endif /* __IMMAP_5271__ */ diff --git a/include/asm-m68k/immap_5272.h b/include/asm-m68k/immap_5272.h index b106289c03..8d4254bcdb 100644 --- a/include/asm-m68k/immap_5272.h +++ b/include/asm-m68k/immap_5272.h @@ -44,6 +44,8 @@ #define MMAP_FEC (CONFIG_SYS_MBAR + 0x00000840) #define MMAP_USB (CONFIG_SYS_MBAR + 0x00001000) +#include <asm/coldfire/pwm.h> + /* System configuration registers */ typedef struct sys_ctrl { uint sc_mbar; @@ -104,38 +106,6 @@ typedef struct gpio_ctrl { uchar res2[4]; } gpio_t; -/* QSPI module registers */ -typedef struct qspi_ctrl { - ushort qspi_qmr; - uchar res1[2]; - ushort qspi_qdlyr; - uchar res2[2]; - ushort qspi_qwr; - uchar res3[2]; - ushort qspi_qir; - uchar res4[2]; - ushort qspi_qar; - uchar res5[2]; - ushort qspi_qdr; - uchar res6[10]; -} qspi_t; - -/* PWM module registers */ -typedef struct pwm_ctrl { - uchar pwm_pwcr0; - uchar res1[3]; - uchar pwm_pwcr1; - uchar res2[3]; - uchar pwm_pwcr2; - uchar res3[7]; - uchar pwm_pwwd0; - uchar res4[3]; - uchar pwm_pwwd1; - uchar res5[3]; - uchar pwm_pwwd2; - uchar res6[7]; -} pwm_t; - /* DMA module registers */ typedef struct dma_ctrl { ulong dma_dmr; diff --git a/include/asm-m68k/immap_5275.h b/include/asm-m68k/immap_5275.h index 495010b139..46426a33d6 100644 --- a/include/asm-m68k/immap_5275.h +++ b/include/asm-m68k/immap_5275.h @@ -66,6 +66,15 @@ #define MMAP_USB (CONFIG_SYS_MBAR + 0x001C0000) #define MMAP_PWM0 (CONFIG_SYS_MBAR + 0x001D0000) +#include <asm/coldfire/eport.h> +#include <asm/coldfire/flexbus.h> +#include <asm/coldfire/intctrl.h> +#include <asm/coldfire/mdha.h> +#include <asm/coldfire/pwm.h> +#include <asm/coldfire/qspi.h> +#include <asm/coldfire/rng.h> +#include <asm/coldfire/skha.h> + /* System configuration registers */ typedef struct sys_ctrl { @@ -109,51 +118,6 @@ typedef struct sdram_ctrl { u32 sdbmr1; } sdramctrl_t; -/* Chip select module registers, offset: 0x080 -*/ -typedef struct cs_ctlr { - u16 ar0; - u16 res1; - u32 mr0; - u16 res2; - u16 cr0; - u16 ar1; - u16 res3; - u32 mr1; - u16 res4; - u16 cr1; - u16 ar2; - u16 res5; - u32 mr2; - u16 res6; - u16 cr2; - u16 ar3; - u16 res7; - u32 mr3; - u16 res8; - u16 cr3; - u16 ar4; - u16 res9; - u32 mr4; - u16 res10; - u16 cr4; - u16 ar5; - u16 res11; - u32 mr5; - u16 res12; - u16 cr5; - u16 ar6; - u16 res13; - u32 mr6; - u16 res14; - u16 cr6; - u16 ar7; - u16 res15; - u32 mr7; - u16 res16; - u16 cr7; -} csctrl_t; - /* DMA module registers, offset 0x100 */ typedef struct dma_ctrl { @@ -163,55 +127,6 @@ typedef struct dma_ctrl { u32 dcr; } dma_t; -/* QSPI module registers, offset 0x340 - */ -typedef struct qspi_ctrl { - u16 qmr; - u8 res1[2]; - u16 qdlyr; - u8 res2[2]; - u16 qwr; - u8 res3[2]; - u16 qir; - u8 res4[2]; - u16 qar; - u8 res5[2]; - u16 qdr; - u8 res6[2]; -} qspi_t; - -/* Interrupt module registers, offset 0xc00 -*/ -typedef struct int_ctrl { - u32 iprh0; - u32 iprl0; - u32 imrh0; - u32 imrl0; - u32 frch0; - u32 frcl0; - u8 irlr; - u8 iacklpr; - u8 res1[0x26]; - u8 icr0[64]; /* No ICR0, done this way for readability */ - u8 res2[0x60]; - u8 swiack0; - u8 res3[3]; - u8 Lniack0_1; - u8 res4[3]; - u8 Lniack0_2; - u8 res5[3]; - u8 Lniack0_3; - u8 res6[3]; - u8 Lniack0_4; - u8 res7[3]; - u8 Lniack0_5; - u8 res8[3]; - u8 Lniack0_6; - u8 res9[3]; - u8 Lniack0_7; - u8 res10[3]; -} int0_t; - /* GPIO port registers */ typedef struct gpio_ctrl { @@ -325,23 +240,6 @@ typedef struct gpio_ctrl { } gpio_t; -/* PWM module registers - */ -typedef struct pwm_ctrl { - u8 pwcr0; - u8 res1[3]; - u8 pwcr1; - u8 res2[3]; - u8 pwcr2; - u8 res3[7]; - u8 pwwd0; - u8 res4[3]; - u8 pwwd1; - u8 res5[3]; - u8 pwwd2; - u8 res6[7]; -} pwm_t; - /* Watchdog registers */ typedef struct wdog_ctrl { diff --git a/include/asm-m68k/immap_5282.h b/include/asm-m68k/immap_5282.h index e96463be43..dd526a1198 100644 --- a/include/asm-m68k/immap_5282.h +++ b/include/asm-m68k/immap_5282.h @@ -62,6 +62,12 @@ #define MMAP_CFMC (CONFIG_SYS_MBAR + 0x001D0000) #define MMAP_CFMMEM (CONFIG_SYS_MBAR + 0x04000000) +#include <asm/coldfire/eport.h> +#include <asm/coldfire/flexbus.h> +#include <asm/coldfire/flexcan.h> +#include <asm/coldfire/intctrl.h> +#include <asm/coldfire/qspi.h> + /* System Control Module */ typedef struct scm_ctrl { u32 ipsbar; @@ -92,88 +98,9 @@ typedef struct scm_ctrl { u16 res8; } scm_t; -/* Flexbus module Chip select registers */ -typedef struct fbcs_ctrl { - u16 csar0; /* 0x00 Chip-Select Address Register 0 */ - u16 res0; - u32 csmr0; /* 0x04 Chip-Select Mask Register 0 */ - u16 res1; /* 0x08 */ - u16 cscr0; /* 0x0A Chip-Select Control Register 0 */ - - u16 csar1; /* 0x0C Chip-Select Address Register 1 */ - u16 res2; - u32 csmr1; /* 0x10 Chip-Select Mask Register 1 */ - u16 res3; /* 0x14 */ - u16 cscr1; /* 0x16 Chip-Select Control Register 1 */ - - u16 csar2; /* 0x18 Chip-Select Address Register 2 */ - u16 res4; - u32 csmr2; /* 0x1C Chip-Select Mask Register 2 */ - u16 res5; /* 0x20 */ - u16 cscr2; /* 0x22 Chip-Select Control Register 2 */ - - u16 csar3; /* 0x24 Chip-Select Address Register 3 */ - u16 res6; - u32 csmr3; /* 0x28 Chip-Select Mask Register 3 */ - u16 res7; /* 0x2C */ - u16 cscr3; /* 0x2E Chip-Select Control Register 3 */ - - u16 csar4; /* 0x30 Chip-Select Address Register 4 */ - u16 res8; - u32 csmr4; /* 0x34 Chip-Select Mask Register 4 */ - u16 res9; /* 0x38 */ - u16 cscr4; /* 0x3A Chip-Select Control Register 4 */ - - u16 csar5; /* 0x3C Chip-Select Address Register 5 */ - u16 res10; - u32 csmr5; /* 0x40 Chip-Select Mask Register 5 */ - u16 res11; /* 0x44 */ - u16 cscr5; /* 0x46 Chip-Select Control Register 5 */ - - u16 csar6; /* 0x48 Chip-Select Address Register 5 */ - u16 res12; - u32 csmr6; /* 0x4C Chip-Select Mask Register 5 */ - u16 res13; /* 0x50 */ - u16 cscr6; /* 0x52 Chip-Select Control Register 5 */ - - u16 csar7; /* 0x54 Chip-Select Address Register 5 */ - u16 res14; - u32 csmr7; /* 0x58 Chip-Select Mask Register 5 */ - u16 res15; /* 0x5C */ - u16 cscr7; /* 0x5E Chip-Select Control Register 5 */ -} fbcs_t; - -/* Interrupt module registers */ -typedef struct int0_ctrl { - /* Interrupt Controller 0 */ - u32 iprh0; /* 0x00 Pending Register High */ - u32 iprl0; /* 0x04 Pending Register Low */ - u32 imrh0; /* 0x08 Mask Register High */ - u32 imrl0; /* 0x0C Mask Register Low */ - u32 frch0; /* 0x10 Force Register High */ - u32 frcl0; /* 0x14 Force Register Low */ - u8 irlr; /* 0x18 */ - u8 iacklpr; /* 0x19 */ - u16 res1[19]; /* 0x1a - 0x3c */ - u8 icr0[64]; /* 0x40 - 0x7F Control registers */ - u32 res3[24]; /* 0x80 - 0xDF */ - u8 swiack0; /* 0xE0 Software Interrupt Acknowledge */ - u8 res4[3]; /* 0xE1 - 0xE3 */ - u8 Lniack0_1; /* 0xE4 Level n interrupt acknowledge resister */ - u8 res5[3]; /* 0xE5 - 0xE7 */ - u8 Lniack0_2; /* 0xE8 Level n interrupt acknowledge resister */ - u8 res6[3]; /* 0xE9 - 0xEB */ - u8 Lniack0_3; /* 0xEC Level n interrupt acknowledge resister */ - u8 res7[3]; /* 0xED - 0xEF */ - u8 Lniack0_4; /* 0xF0 Level n interrupt acknowledge resister */ - u8 res8[3]; /* 0xF1 - 0xF3 */ - u8 Lniack0_5; /* 0xF4 Level n interrupt acknowledge resister */ - u8 res9[3]; /* 0xF5 - 0xF7 */ - u8 Lniack0_6; /* 0xF8 Level n interrupt acknowledge resister */ - u8 resa[3]; /* 0xF9 - 0xFB */ - u8 Lniack0_7; /* 0xFC Level n interrupt acknowledge resister */ - u8 resb[3]; /* 0xFD - 0xFF */ -} int0_t; +typedef struct canex_ctrl { + can_msg_t msg[16]; /* 0x00 Message Buffer 0-15 */ +} canex_t; /* Clock Module registers */ typedef struct pll_ctrl { diff --git a/include/asm-m68k/immap_5301x.h b/include/asm-m68k/immap_5301x.h new file mode 100644 index 0000000000..87ac770cf8 --- /dev/null +++ b/include/asm-m68k/immap_5301x.h @@ -0,0 +1,324 @@ +/* + * MCF5301x Internal Memory Map + * + * Copyright (C) 2004-2008 Freescale Semiconductor, Inc. + * TsiChung Liew (Tsi-Chung.Liew@freescale.com) + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __IMMAP_5301X__ +#define __IMMAP_5301X__ + +#define MMAP_SCM1 (CONFIG_SYS_MBAR + 0x00000000) +#define MMAP_XBS (CONFIG_SYS_MBAR + 0x00004000) +#define MMAP_FBCS (CONFIG_SYS_MBAR + 0x00008000) +#define MMAP_MPU (CONFIG_SYS_MBAR + 0x00014000) +#define MMAP_FEC0 (CONFIG_SYS_MBAR + 0x00030000) +#define MMAP_FEC1 (CONFIG_SYS_MBAR + 0x00034000) +#define MMAP_SCM2 (CONFIG_SYS_MBAR + 0x00040000) +#define MMAP_EDMA (CONFIG_SYS_MBAR + 0x00044000) +#define MMAP_INTC0 (CONFIG_SYS_MBAR + 0x00048000) +#define MMAP_INTC1 (CONFIG_SYS_MBAR + 0x0004C000) +#define MMAP_INTCACK (CONFIG_SYS_MBAR + 0x00054000) +#define MMAP_I2C (CONFIG_SYS_MBAR + 0x00058000) +#define MMAP_DSPI (CONFIG_SYS_MBAR + 0x0005C000) +#define MMAP_UART0 (CONFIG_SYS_MBAR + 0x00060000) +#define MMAP_UART1 (CONFIG_SYS_MBAR + 0x00064000) +#define MMAP_UART2 (CONFIG_SYS_MBAR + 0x00068000) +#define MMAP_DTMR0 (CONFIG_SYS_MBAR + 0x00070000) +#define MMAP_DTMR1 (CONFIG_SYS_MBAR + 0x00074000) +#define MMAP_DTMR2 (CONFIG_SYS_MBAR + 0x00078000) +#define MMAP_DTMR3 (CONFIG_SYS_MBAR + 0x0007C000) +#define MMAP_PIT0 (CONFIG_SYS_MBAR + 0x00080000) +#define MMAP_PIT1 (CONFIG_SYS_MBAR + 0x00084000) +#define MMAP_PIT2 (CONFIG_SYS_MBAR + 0x00088000) +#define MMAP_PIT3 (CONFIG_SYS_MBAR + 0x0008C000) +#define MMAP_EPORT0 (CONFIG_SYS_MBAR + 0x00090000) +#define MMAP_EPORT1 (CONFIG_SYS_MBAR + 0x00094000) +#define MMAP_VOICOD (CONFIG_SYS_MBAR + 0x0009C000) +#define MMAP_RCM (CONFIG_SYS_MBAR + 0x000A0000) +#define MMAP_CCM (CONFIG_SYS_MBAR + 0x000A0004) +#define MMAP_GPIO (CONFIG_SYS_MBAR + 0x000A4000) +#define MMAP_RTC (CONFIG_SYS_MBAR + 0x000A8000) +#define MMAP_SIM (CONFIG_SYS_MBAR + 0x000AC000) +#define MMAP_USBOTG (CONFIG_SYS_MBAR + 0x000B0000) +#define MMAP_USBH (CONFIG_SYS_MBAR + 0x000B4000) +#define MMAP_SDRAM (CONFIG_SYS_MBAR + 0x000B8000) +#define MMAP_SSI (CONFIG_SYS_MBAR + 0x000BC000) +#define MMAP_PLL (CONFIG_SYS_MBAR + 0x000C0000) +#define MMAP_RNG (CONFIG_SYS_MBAR + 0x000C4000) +#define MMAP_IIM (CONFIG_SYS_MBAR + 0x000C8000) +#define MMAP_ESDHC (CONFIG_SYS_MBAR + 0x000CC000) + +#include <asm/coldfire/crossbar.h> +#include <asm/coldfire/dspi.h> +#include <asm/coldfire/edma.h> +#include <asm/coldfire/eport.h> +#include <asm/coldfire/flexbus.h> +#include <asm/coldfire/intctrl.h> +#include <asm/coldfire/ssi.h> +#include <asm/coldfire/rng.h> +#include <asm/rtc.h> + +/* System Controller Module */ +typedef struct scm1 { + u32 mpr; /* 0x00 Master Privilege */ + u32 rsvd1[7]; + u32 pacra; /* 0x20 Peripheral Access Ctrl A */ + u32 pacrb; /* 0x24 Peripheral Access Ctrl B */ + u32 pacrc; /* 0x28 Peripheral Access Ctrl C */ + u32 pacrd; /* 0x2C Peripheral Access Ctrl D */ + u32 rsvd2[4]; + u32 pacre; /* 0x40 Peripheral Access Ctrl E */ + u32 pacrf; /* 0x44 Peripheral Access Ctrl F */ + u32 pacrg; /* 0x48 Peripheral Access Ctrl G */ +} scm1_t; + +typedef struct scm2 { + u8 rsvd1[19]; /* 0x00 - 0x12 */ + u8 wcr; /* 0x13 */ + u16 rsvd2; /* 0x14 - 0x15 */ + u16 cwcr; /* 0x16 */ + u8 rsvd3[3]; /* 0x18 - 0x1A */ + u8 cwsr; /* 0x1B */ + u8 rsvd4[3]; /* 0x1C - 0x1E */ + u8 scmisr; /* 0x1F */ + u32 rsvd5; /* 0x20 - 0x23 */ + u8 bcr; /* 0x24 */ + u8 rsvd6[74]; /* 0x25 - 0x6F */ + u32 cfadr; /* 0x70 */ + u8 rsvd7; /* 0x74 */ + u8 cfier; /* 0x75 */ + u8 cfloc; /* 0x76 */ + u8 cfatr; /* 0x77 */ + u32 rsvd8; /* 0x78 - 0x7B */ + u32 cfdtr; /* 0x7C */ +} scm2_t; + +/* PWM module */ +typedef struct pwm_ctrl { + u8 en; /* 0x00 PWM Enable */ + u8 pol; /* 0x01 Polarity */ + u8 clk; /* 0x02 Clock Select */ + u8 prclk; /* 0x03 Prescale Clock Select */ + u8 cae; /* 0x04 Center Align Enable */ + u8 ctl; /* 0x05 Ctrl */ + u8 res1[2]; /* 0x06 - 0x07 */ + u8 scla; /* 0x08 Scale A */ + u8 sclb; /* 0x09 Scale B */ + u8 res2[2]; /* 0x0A - 0x0B */ + u8 cnt0; /* 0x0C Channel 0 Counter */ + u8 cnt1; /* 0x0D Channel 1 Counter */ + u8 cnt2; /* 0x0E Channel 2 Counter */ + u8 cnt3; /* 0x0F Channel 3 Counter */ + u8 cnt4; /* 0x10 Channel 4 Counter */ + u8 cnt5; /* 0x11 Channel 5 Counter */ + u8 cnt6; /* 0x12 Channel 6 Counter */ + u8 cnt7; /* 0x13 Channel 7 Counter */ + u8 per0; /* 0x14 Channel 0 Period */ + u8 per1; /* 0x15 Channel 1 Period */ + u8 per2; /* 0x16 Channel 2 Period */ + u8 per3; /* 0x17 Channel 3 Period */ + u8 per4; /* 0x18 Channel 4 Period */ + u8 per5; /* 0x19 Channel 5 Period */ + u8 per6; /* 0x1A Channel 6 Period */ + u8 per7; /* 0x1B Channel 7 Period */ + u8 dty0; /* 0x1C Channel 0 Duty */ + u8 dty1; /* 0x1D Channel 1 Duty */ + u8 dty2; /* 0x1E Channel 2 Duty */ + u8 dty3; /* 0x1F Channel 3 Duty */ + u8 dty4; /* 0x20 Channel 4 Duty */ + u8 dty5; /* 0x21 Channel 5 Duty */ + u8 dty6; /* 0x22 Channel 6 Duty */ + u8 dty7; /* 0x23 Channel 7 Duty */ + u8 sdn; /* 0x24 Shutdown */ + u8 res3[3]; /* 0x25 - 0x27 */ +} pwm_t; + +/* Chip configuration module */ +typedef struct rcm { + u8 rcr; + u8 rsr; +} rcm_t; + +typedef struct ccm_ctrl { + u16 ccr; /* 0x00 Chip Cfg */ + u16 res1; /* 0x02 */ + u16 rcon; /* 0x04 Reset Cfg */ + u16 cir; /* 0x06 Chip ID */ + u32 res2; /* 0x08 */ + u16 misccr; /* 0x0A Misc Ctrl */ + u16 cdr; /* 0x0C Clock divider */ + u16 uhcsr; /* 0x10 USB Host status */ + u16 uocsr; /* 0x12 USB On-the-Go Status */ + u16 res3; /* 0x14 */ + u16 codeccr; /* 0x16 Codec Control */ + u16 misccr2; /* 0x18 Misc2 Ctrl */ +} ccm_t; + +/* GPIO port */ +typedef struct gpio_ctrl { + /* Port Output Data */ + u8 podr_fbctl; /* 0x00 */ + u8 podr_be; /* 0x01 */ + u8 podr_cs; /* 0x02 */ + u8 podr_dspi; /* 0x03 */ + u8 res01; /* 0x04 */ + u8 podr_fec0; /* 0x05 */ + u8 podr_feci2c; /* 0x06 */ + u8 res02[2]; /* 0x07 - 0x08 */ + u8 podr_simp1; /* 0x09 */ + u8 podr_simp0; /* 0x0A */ + u8 podr_timer; /* 0x0B */ + u8 podr_uart; /* 0x0C */ + u8 podr_debug; /* 0x0D */ + u8 res03; /* 0x0E */ + u8 podr_sdhc; /* 0x0F */ + u8 podr_ssi; /* 0x10 */ + u8 res04[3]; /* 0x11 - 0x13 */ + + /* Port Data Direction */ + u8 pddr_fbctl; /* 0x14 */ + u8 pddr_be; /* 0x15 */ + u8 pddr_cs; /* 0x16 */ + u8 pddr_dspi; /* 0x17 */ + u8 res05; /* 0x18 */ + u8 pddr_fec0; /* 0x19 */ + u8 pddr_feci2c; /* 0x1A */ + u8 res06[2]; /* 0x1B - 0x1C */ + u8 pddr_simp1; /* 0x1D */ + u8 pddr_simp0; /* 0x1E */ + u8 pddr_timer; /* 0x1F */ + u8 pddr_uart; /* 0x20 */ + u8 pddr_debug; /* 0x21 */ + u8 res07; /* 0x22 */ + u8 pddr_sdhc; /* 0x23 */ + u8 pddr_ssi; /* 0x24 */ + u8 res08[3]; /* 0x25 - 0x27 */ + + /* Port Data Direction */ + u8 ppdr_fbctl; /* 0x28 */ + u8 ppdr_be; /* 0x29 */ + u8 ppdr_cs; /* 0x2A */ + u8 ppdr_dspi; /* 0x2B */ + u8 res09; /* 0x2C */ + u8 ppdr_fec0; /* 0x2D */ + u8 ppdr_feci2c; /* 0x2E */ + u8 res10[2]; /* 0x2F - 0x30 */ + u8 ppdr_simp1; /* 0x31 */ + u8 ppdr_simp0; /* 0x32 */ + u8 ppdr_timer; /* 0x33 */ + u8 ppdr_uart; /* 0x34 */ + u8 ppdr_debug; /* 0x35 */ + u8 res11; /* 0x36 */ + u8 ppdr_sdhc; /* 0x37 */ + u8 ppdr_ssi; /* 0x38 */ + u8 res12[3]; /* 0x39 - 0x3B */ + + /* Port Clear Output Data */ + u8 pclrr_fbctl; /* 0x3C */ + u8 pclrr_be; /* 0x3D */ + u8 pclrr_cs; /* 0x3E */ + u8 pclrr_dspi; /* 0x3F */ + u8 res13; /* 0x40 */ + u8 pclrr_fec0; /* 0x41 */ + u8 pclrr_feci2c; /* 0x42 */ + u8 res14[2]; /* 0x43 - 0x44 */ + u8 pclrr_simp1; /* 0x45 */ + u8 pclrr_simp0; /* 0x46 */ + u8 pclrr_timer; /* 0x47 */ + u8 pclrr_uart; /* 0x48 */ + u8 pclrr_debug; /* 0x49 */ + u8 res15; /* 0x4A */ + u8 pclrr_sdhc; /* 0x4B */ + u8 pclrr_ssi; /* 0x4C */ + u8 res16[3]; /* 0x4D - 0x4F */ + + /* Pin Assignment */ + u8 par_fbctl; /* 0x50 */ + u8 par_be; /* 0x51 */ + u8 par_cs; /* 0x52 */ + u8 res17; /* 0x53 */ + u8 par_dspih; /* 0x54 */ + u8 par_dspil; /* 0x55 */ + u8 par_fec; /* 0x56 */ + u8 par_feci2c; /* 0x57 */ + u8 par_irq0h; /* 0x58 */ + u8 par_irq0l; /* 0x59 */ + u8 par_irq1h; /* 0x5A */ + u8 par_irq1l; /* 0x5B */ + u8 par_simp1h; /* 0x5C */ + u8 par_simp1l; /* 0x5D */ + u8 par_simp0; /* 0x5E */ + u8 par_timer; /* 0x5F */ + u8 par_uart; /* 0x60 */ + u8 res18; /* 0x61 */ + u8 par_debug; /* 0x62 */ + u8 par_sdhc; /* 0x63 */ + u8 par_ssih; /* 0x64 */ + u8 par_ssil; /* 0x65 */ + u8 res19[2]; /* 0x66 - 0x67 */ + + /* Mode Select Control */ + /* Drive Strength Control */ + u8 mscr_mscr1; /* 0x68 */ + u8 mscr_mscr2; /* 0x69 */ + u8 mscr_mscr3; /* 0x6A */ + u8 mscr_mscr45; /* 0x6B */ + u8 srcr_dspi; /* 0x6C */ + u8 dscr_fec; /* 0x6D */ + u8 srcr_i2c; /* 0x6E */ + u8 srcr_irq; /* 0x6F */ + + u8 srcr_sim; /* 0x70 */ + u8 srcr_timer; /* 0x71 */ + u8 srcr_uart; /* 0x72 */ + u8 res20; /* 0x73 */ + u8 srcr_sdhc; /* 0x74 */ + u8 srcr_ssi; /* 0x75 */ + u8 res21[2]; /* 0x76 - 0x77 */ + u8 pcr_pcrh; /* 0x78 */ + u8 pcr_pcrl; /* 0x79 */ +} gpio_t; + +/* SDRAM controller */ +typedef struct sdram_ctrl { + u32 mode; /* 0x00 Mode/Extended Mode */ + u32 ctrl; /* 0x04 Ctrl */ + u32 cfg1; /* 0x08 Cfg 1 */ + u32 cfg2; /* 0x0C Cfg 2 */ + u32 res1[64]; /* 0x10 - 0x10F */ + u32 cs0; /* 0x110 Chip Select 0 Cfg */ + u32 cs1; /* 0x114 Chip Select 1 Cfg */ +} sdram_t; + +/* Clock Module */ +typedef struct pll_ctrl { + u32 pcr; /* 0x00 Ctrl */ + u32 pdr; /* 0x04 Divider */ + u32 psr; /* 0x08 Status */ +} pll_t; + +typedef struct rtcex { + u32 rsvd1[3]; + u32 gocu; + u32 gocl; +} rtcex_t; +#endif /* __IMMAP_5301X__ */ diff --git a/include/asm-m68k/immap_5329.h b/include/asm-m68k/immap_5329.h index 7678406e51..4f255c6a30 100644 --- a/include/asm-m68k/immap_5329.h +++ b/include/asm-m68k/immap_5329.h @@ -70,9 +70,16 @@ #include <asm/coldfire/crossbar.h> #include <asm/coldfire/edma.h> +#include <asm/coldfire/eport.h> +#include <asm/coldfire/qspi.h> #include <asm/coldfire/flexbus.h> +#include <asm/coldfire/flexcan.h> +#include <asm/coldfire/intctrl.h> #include <asm/coldfire/lcd.h> +#include <asm/coldfire/mdha.h> +#include <asm/coldfire/pwm.h> #include <asm/coldfire/ssi.h> +#include <asm/coldfire/skha.h> /* System control module registers */ typedef struct scm1_ctrl { @@ -83,72 +90,6 @@ typedef struct scm1_ctrl { u32 bmt0; /*0x54 Bus Monitor Timeout 0 */ } scm1_t; -/* Message Digest Hardware Accelerator */ -typedef struct mdha_ctrl { - u32 mdmr; /* 0x00 MDHA Mode Register */ - u32 mdcr; /* 0x04 Control register */ - u32 mdcmr; /* 0x08 Command Register */ - u32 mdsr; /* 0x0C Status Register */ - u32 mdisr; /* 0x10 Interrupt Status Register */ - u32 mdimr; /* 0x14 Interrupt Mask Register */ - u32 mddsr; /* 0x1C Data Size Register */ - u32 mdin; /* 0x20 Input FIFO */ - u32 res1[3]; /* 0x24 - 0x2F */ - u32 mdao; /* 0x30 Message Digest AO Register */ - u32 mdbo; /* 0x34 Message Digest BO Register */ - u32 mdco; /* 0x38 Message Digest CO Register */ - u32 mddo; /* 0x3C Message Digest DO Register */ - u32 mdeo; /* 0x40 Message Digest EO Register */ - u32 mdmds; /* 0x44 Message Data Size Register */ - u32 res[10]; /* 0x48 - 0x6F */ - u32 mda1; /* 0x70 Message Digest A1 Register */ - u32 mdb1; /* 0x74 Message Digest B1 Register */ - u32 mdc1; /* 0x78 Message Digest C1 Register */ - u32 mdd1; /* 0x7C Message Digest D1 Register */ - u32 mde1; /* 0x80 Message Digest E1 Register */ -} mdha_t; - -/* Symmetric Key Hardware Accelerator */ -typedef struct skha_ctrl { - u32 mr; /* 0x00 Mode Register */ - u32 cr; /* 0x04 Control Register */ - u32 cmr; /* 0x08 Command Register */ - u32 sr; /* 0x0C Status Register */ - u32 esr; /* 0x10 Error Status Register */ - u32 emr; /* 0x14 Error Status Mask Register) */ - u32 ksr; /* 0x18 Key Size Register */ - u32 dsr; /* 0x1C Data Size Register */ - u32 in; /* 0x20 Input FIFO */ - u32 out; /* 0x24 Output FIFO */ - u32 res1[2]; /* 0x28 - 0x2F */ - u32 kdr1; /* 0x30 Key Data Register 1 */ - u32 kdr2; /* 0x34 Key Data Register 2 */ - u32 kdr3; /* 0x38 Key Data Register 3 */ - u32 kdr4; /* 0x3C Key Data Register 4 */ - u32 kdr5; /* 0x40 Key Data Register 5 */ - u32 kdr6; /* 0x44 Key Data Register 6 */ - u32 res2[10]; /* 0x48 - 0x6F */ - u32 c1; /* 0x70 Context 1 */ - u32 c2; /* 0x74 Context 2 */ - u32 c3; /* 0x78 Context 3 */ - u32 c4; /* 0x7C Context 4 */ - u32 c5; /* 0x80 Context 5 */ - u32 c6; /* 0x84 Context 6 */ - u32 c7; /* 0x88 Context 7 */ - u32 c8; /* 0x8C Context 8 */ - u32 c9; /* 0x90 Context 9 */ - u32 c10; /* 0x94 Context 10 */ - u32 c11; /* 0x98 Context 11 */ -} skha_t; - -/* Random Number Generator */ -typedef struct rng_ctrl { - u32 rngcr; /* 0x00 RNG Control Register */ - u32 rngsr; /* 0x04 RNG Status Register */ - u32 rnger; /* 0x08 RNG Entropy Register */ - u32 rngout; /* 0x0C RNG Output FIFO */ -} rng_t; - /* System control module registers 2 */ typedef struct scm2_ctrl { u32 mpr1; /* 0x00 Master Privilege Register */ @@ -165,25 +106,6 @@ typedef struct scm2_ctrl { u32 bmt1; /* 0x54 Bus Monitor Timeout 1 */ } scm2_t; -/* FlexCan module registers */ -typedef struct can_ctrl { - u32 mcr; /* 0x00 Module Configuration register */ - u32 ctrl; /* 0x04 Control register */ - u32 timer; /* 0x08 Free Running Timer */ - u32 res1; /* 0x0C */ - u32 rxgmask; /* 0x10 Rx Global Mask */ - u32 rx14mask; /* 0x14 RxBuffer 14 Mask */ - u32 rx15mask; /* 0x18 RxBuffer 15 Mask */ - u32 errcnt; /* 0x1C Error Counter Register */ - u32 errstat; /* 0x20 Error and status Register */ - u32 res2; /* 0x24 */ - u32 imask; /* 0x28 Interrupt Mask Register */ - u32 res3; /* 0x2C */ - u32 iflag; /* 0x30 Interrupt Flag Register */ - u32 res4[19]; /* 0x34 - 0x7F */ - u32 MB0_15[2048]; /* 0x80 Message Buffer 0-15 */ -} can_t; - /* System Control Module register 3 */ typedef struct scm3_ctrl { u8 res1[19]; /* 0x00 - 0x12 */ @@ -206,148 +128,9 @@ typedef struct scm3_ctrl { u32 cfdtr; /* 0x7C Core Fault Data Register */ } scm3_t; -/* Interrupt module registers */ -typedef struct int0_ctrl { - /* Interrupt Controller 0 */ - u32 iprh0; /* 0x00 Pending Register High */ - u32 iprl0; /* 0x04 Pending Register Low */ - u32 imrh0; /* 0x08 Mask Register High */ - u32 imrl0; /* 0x0C Mask Register Low */ - u32 frch0; /* 0x10 Force Register High */ - u32 frcl0; /* 0x14 Force Register Low */ - u16 res1; /* 0x18 - 0x19 */ - u16 icfg0; /* 0x1A Configuration Register */ - u8 simr0; /* 0x1C Set Interrupt Mask */ - u8 cimr0; /* 0x1D Clear Interrupt Mask */ - u8 clmask0; /* 0x1E Current Level Mask */ - u8 slmask; /* 0x1F Saved Level Mask */ - u32 res2[8]; /* 0x20 - 0x3F */ - u8 icr0[64]; /* 0x40 - 0x7F Control registers */ - u32 res3[24]; /* 0x80 - 0xDF */ - u8 swiack0; /* 0xE0 Software Interrupt Acknowledge */ - u8 res4[3]; /* 0xE1 - 0xE3 */ - u8 Lniack0_1; /* 0xE4 Level n interrupt acknowledge resister */ - u8 res5[3]; /* 0xE5 - 0xE7 */ - u8 Lniack0_2; /* 0xE8 Level n interrupt acknowledge resister */ - u8 res6[3]; /* 0xE9 - 0xEB */ - u8 Lniack0_3; /* 0xEC Level n interrupt acknowledge resister */ - u8 res7[3]; /* 0xED - 0xEF */ - u8 Lniack0_4; /* 0xF0 Level n interrupt acknowledge resister */ - u8 res8[3]; /* 0xF1 - 0xF3 */ - u8 Lniack0_5; /* 0xF4 Level n interrupt acknowledge resister */ - u8 res9[3]; /* 0xF5 - 0xF7 */ - u8 Lniack0_6; /* 0xF8 Level n interrupt acknowledge resister */ - u8 resa[3]; /* 0xF9 - 0xFB */ - u8 Lniack0_7; /* 0xFC Level n interrupt acknowledge resister */ - u8 resb[3]; /* 0xFD - 0xFF */ -} int0_t; - -typedef struct int1_ctrl { - /* Interrupt Controller 1 */ - u32 iprh1; /* 0x00 Pending Register High */ - u32 iprl1; /* 0x04 Pending Register Low */ - u32 imrh1; /* 0x08 Mask Register High */ - u32 imrl1; /* 0x0C Mask Register Low */ - u32 frch1; /* 0x10 Force Register High */ - u32 frcl1; /* 0x14 Force Register Low */ - u16 res1; /* 0x18 */ - u16 icfg1; /* 0x1A Configuration Register */ - u8 simr1; /* 0x1C Set Interrupt Mask */ - u8 cimr1; /* 0x1D Clear Interrupt Mask */ - u16 res2; /* 0x1E - 0x1F */ - u32 res3[8]; /* 0x20 - 0x3F */ - u8 icr1[64]; /* 0x40 - 0x7F */ - u32 res4[24]; /* 0x80 - 0xDF */ - u8 swiack1; /* 0xE0 Software Interrupt Acknowledge */ - u8 res5[3]; /* 0xE1 - 0xE3 */ - u8 Lniack1_1; /* 0xE4 Level n interrupt acknowledge resister */ - u8 res6[3]; /* 0xE5 - 0xE7 */ - u8 Lniack1_2; /* 0xE8 Level n interrupt acknowledge resister */ - u8 res7[3]; /* 0xE9 - 0xEB */ - u8 Lniack1_3; /* 0xEC Level n interrupt acknowledge resister */ - u8 res8[3]; /* 0xED - 0xEF */ - u8 Lniack1_4; /* 0xF0 Level n interrupt acknowledge resister */ - u8 res9[3]; /* 0xF1 - 0xF3 */ - u8 Lniack1_5; /* 0xF4 Level n interrupt acknowledge resister */ - u8 resa[3]; /* 0xF5 - 0xF7 */ - u8 Lniack1_6; /* 0xF8 Level n interrupt acknowledge resister */ - u8 resb[3]; /* 0xF9 - 0xFB */ - u8 Lniack1_7; /* 0xFC Level n interrupt acknowledge resister */ - u8 resc[3]; /* 0xFD - 0xFF */ -} int1_t; - -typedef struct intgack_ctrl1 { - /* Global IACK Registers */ - u8 swiack; /* 0xE0 Global Software Interrupt Acknowledge */ - u8 Lniack[7]; /* 0xE1 - 0xE7 Global Level 0 Interrupt Acknowledge */ -} intgack_t; - -/* QSPI module registers */ -typedef struct qspi_ctrl { - u16 qmr; /* Mode register */ - u16 res1; - u16 qdlyr; /* Delay register */ - u16 res2; - u16 qwr; /* Wrap register */ - u16 res3; - u16 qir; /* Interrupt register */ - u16 res4; - u16 qar; /* Address register */ - u16 res5; - u16 qdr; /* Data register */ - u16 res6; -} qspi_t; - -/* PWM module registers */ -typedef struct pwm_ctrl { - u8 en; /* 0x00 PWM Enable Register */ - u8 pol; /* 0x01 Polarity Register */ - u8 clk; /* 0x02 Clock Select Register */ - u8 prclk; /* 0x03 Prescale Clock Select Register */ - u8 cae; /* 0x04 Center Align Enable Register */ - u8 ctl; /* 0x05 Control Register */ - u8 res1[2]; /* 0x06 - 0x07 */ - u8 scla; /* 0x08 Scale A register */ - u8 sclb; /* 0x09 Scale B register */ - u8 res2[2]; /* 0x0A - 0x0B */ - u8 cnt0; /* 0x0C Channel 0 Counter register */ - u8 cnt1; /* 0x0D Channel 1 Counter register */ - u8 cnt2; /* 0x0E Channel 2 Counter register */ - u8 cnt3; /* 0x0F Channel 3 Counter register */ - u8 cnt4; /* 0x10 Channel 4 Counter register */ - u8 cnt5; /* 0x11 Channel 5 Counter register */ - u8 cnt6; /* 0x12 Channel 6 Counter register */ - u8 cnt7; /* 0x13 Channel 7 Counter register */ - u8 per0; /* 0x14 Channel 0 Period register */ - u8 per1; /* 0x15 Channel 1 Period register */ - u8 per2; /* 0x16 Channel 2 Period register */ - u8 per3; /* 0x17 Channel 3 Period register */ - u8 per4; /* 0x18 Channel 4 Period register */ - u8 per5; /* 0x19 Channel 5 Period register */ - u8 per6; /* 0x1A Channel 6 Period register */ - u8 per7; /* 0x1B Channel 7 Period register */ - u8 dty0; /* 0x1C Channel 0 Duty register */ - u8 dty1; /* 0x1D Channel 1 Duty register */ - u8 dty2; /* 0x1E Channel 2 Duty register */ - u8 dty3; /* 0x1F Channel 3 Duty register */ - u8 dty4; /* 0x20 Channel 4 Duty register */ - u8 dty5; /* 0x21 Channel 5 Duty register */ - u8 dty6; /* 0x22 Channel 6 Duty register */ - u8 dty7; /* 0x23 Channel 7 Duty register */ - u8 sdn; /* 0x24 Shutdown register */ - u8 res3[3]; /* 0x25 - 0x27 */ -} pwm_t; - -/* Edge Port module registers */ -typedef struct eport_ctrl { - u16 par; /* 0x00 Pin Assignment Register */ - u8 ddar; /* 0x02 Data Direction Register */ - u8 ier; /* 0x03 Interrupt Enable Register */ - u8 dr; /* 0x04 Data Register */ - u8 pdr; /* 0x05 Pin Data Register */ - u8 fr; /* 0x06 Flag_Register */ - u8 res1; -} eport_t; +typedef struct canex_ctrl { + can_msg_t msg[16]; /* 0x00 Message Buffer 0-15 */ +} canex_t; /* Watchdog registers */ typedef struct wdog_ctrl { @@ -593,53 +376,6 @@ typedef struct usb_otg { u32 eptctrl3; /* 0x1CC Endpoint control 3 */ } usbotg_t; -/* USB Host module registers */ -typedef struct usb_host { - u32 id; /* 0x000 Identification Register */ - u32 hwgeneral; /* 0x004 General HW Parameters */ - u32 hwhost; /* 0x008 Host HW Parameters */ - u32 res1; /* 0x0C */ - u32 hwtxbuf; /* 0x010 TX Buffer HW Parameters */ - u32 hwrxbuf; /* 0x014 RX Buffer HW Parameters */ - u32 res2[58]; /* 0x18 - 0xFF */ - - /* Host Controller Capability Register */ - u8 caplength; /* 0x100 Capability Register Length */ - u8 res3; /* 0x101 */ - u16 hciver; /* 0x102 Host Interface Version Number */ - u32 hcsparams; /* 0x104 Host Structural Parameters */ - u32 hccparams; /* 0x108 Host Capability Parameters */ - u32 res4[13]; /* 0x10C - 0x13F */ - - /* Host Controller Operational Register */ - u32 cmd; /* 0x140 USB Command */ - u32 sts; /* 0x144 USB Status */ - u32 intr; /* 0x148 USB Interrupt Enable */ - u32 frindex; /* 0x14C USB Frame Index */ - u32 res5; /* 0x150 (ctrl segment register in EHCI spec) */ - u32 prdlst; /* 0x154 Periodic Frame List Base Address */ - u32 aynclst; /* 0x158 Current Asynchronous List Address */ - u32 ttctrl; /* 0x15C Host TT Asynchronous Buffer Control (non-ehci) */ - u32 burstsize; /* 0x160 Master Interface Data Burst Size (non-ehci) */ - u32 txfill; /* 0x164 Host Transmit FIFO Tuning Control (non-ehci) */ - u32 res6[6]; /* 0x168 - 0x17F */ - u32 cfgflag; /* 0x180 Configure Flag Register */ - u32 portsc1; /* 0x184 Port Status/Control */ - u32 res7[8]; /* 0x188 - 0x1A7 */ - - /* non-ehci registers */ - u32 mode; /* 0x1A8 USB mode register */ - u32 eptsetstat; /* 0x1AC Endpoint Setup status */ - u32 eptprime; /* 0x1B0 Endpoint initialization */ - u32 eptflush; /* 0x1B4 Endpoint de-initialize */ - u32 eptstat; /* 0x1B8 Endpoint status */ - u32 eptcomplete; /* 0x1BC Endpoint Complete */ - u32 eptctrl0; /* 0x1C0 Endpoint control 0 */ - u32 eptctrl1; /* 0x1C4 Endpoint control 1 */ - u32 eptctrl2; /* 0x1C8 Endpoint control 2 */ - u32 eptctrl3; /* 0x1CC Endpoint control 3 */ -} usbhost_t; - /* SDRAM controller registers */ typedef struct sdram_ctrl { u32 mode; /* 0x00 Mode/Extended Mode register */ diff --git a/include/asm-m68k/immap_5445x.h b/include/asm-m68k/immap_5445x.h index ef8930ecd5..57cf3ec7da 100644 --- a/include/asm-m68k/immap_5445x.h +++ b/include/asm-m68k/immap_5445x.h @@ -69,161 +69,15 @@ #define MMAP_USBEHCI 0xFC0B0140 #define MMAP_USBOTG 0xFC0B01A0 +#include <asm/coldfire/ata.h> #include <asm/coldfire/crossbar.h> #include <asm/coldfire/dspi.h> #include <asm/coldfire/edma.h> +#include <asm/coldfire/eport.h> #include <asm/coldfire/flexbus.h> +#include <asm/coldfire/intctrl.h> #include <asm/coldfire/ssi.h> -/* ATA */ -typedef struct atac { - /* PIO */ - u8 toff; /* 0x00 */ - u8 ton; /* 0x01 */ - u8 t1; /* 0x02 */ - u8 t2w; /* 0x03 */ - u8 t2r; /* 0x04 */ - u8 ta; /* 0x05 */ - u8 trd; /* 0x06 */ - u8 t4; /* 0x07 */ - u8 t9; /* 0x08 */ - - /* DMA */ - u8 tm; /* 0x09 */ - u8 tn; /* 0x0A */ - u8 td; /* 0x0B */ - u8 tk; /* 0x0C */ - u8 tack; /* 0x0D */ - u8 tenv; /* 0x0E */ - u8 trp; /* 0x0F */ - u8 tzah; /* 0x10 */ - u8 tmli; /* 0x11 */ - u8 tdvh; /* 0x12 */ - u8 tdzfs; /* 0x13 */ - u8 tdvs; /* 0x14 */ - u8 tcvh; /* 0x15 */ - u8 tss; /* 0x16 */ - u8 tcyc; /* 0x17 */ - - /* FIFO */ - u32 fifo32; /* 0x18 */ - u16 fifo16; /* 0x1C */ - u8 rsvd0[2]; - u8 ffill; /* 0x20 */ - u8 rsvd1[3]; - - /* ATA */ - u8 cr; /* 0x24 */ - u8 rsvd2[3]; - u8 isr; /* 0x28 */ - u8 rsvd3[3]; - u8 ier; /* 0x2C */ - u8 rsvd4[3]; - u8 icr; /* 0x30 */ - u8 rsvd5[3]; - u8 falarm; /* 0x34 */ - u8 rsvd6[106]; -} atac_t; - -/* Interrupt Controller (INTC) */ -typedef struct int0_ctrl { - u32 iprh0; /* 0x00 Pending Register High */ - u32 iprl0; /* 0x04 Pending Register Low */ - u32 imrh0; /* 0x08 Mask Register High */ - u32 imrl0; /* 0x0C Mask Register Low */ - u32 frch0; /* 0x10 Force Register High */ - u32 frcl0; /* 0x14 Force Register Low */ - u16 res1; /* 0x18 - 0x19 */ - u16 icfg0; /* 0x1A Configuration Register */ - u8 simr0; /* 0x1C Set Interrupt Mask */ - u8 cimr0; /* 0x1D Clear Interrupt Mask */ - u8 clmask0; /* 0x1E Current Level Mask */ - u8 slmask; /* 0x1F Saved Level Mask */ - u32 res2[8]; /* 0x20 - 0x3F */ - u8 icr0[64]; /* 0x40 - 0x7F Control registers */ - u32 res3[24]; /* 0x80 - 0xDF */ - u8 swiack0; /* 0xE0 Software Interrupt Acknowledge */ - u8 res4[3]; /* 0xE1 - 0xE3 */ - u8 Lniack0_1; /* 0xE4 Level n interrupt acknowledge resister */ - u8 res5[3]; /* 0xE5 - 0xE7 */ - u8 Lniack0_2; /* 0xE8 Level n interrupt acknowledge resister */ - u8 res6[3]; /* 0xE9 - 0xEB */ - u8 Lniack0_3; /* 0xEC Level n interrupt acknowledge resister */ - u8 res7[3]; /* 0xED - 0xEF */ - u8 Lniack0_4; /* 0xF0 Level n interrupt acknowledge resister */ - u8 res8[3]; /* 0xF1 - 0xF3 */ - u8 Lniack0_5; /* 0xF4 Level n interrupt acknowledge resister */ - u8 res9[3]; /* 0xF5 - 0xF7 */ - u8 Lniack0_6; /* 0xF8 Level n interrupt acknowledge resister */ - u8 resa[3]; /* 0xF9 - 0xFB */ - u8 Lniack0_7; /* 0xFC Level n interrupt acknowledge resister */ - u8 resb[3]; /* 0xFD - 0xFF */ -} int0_t; - -typedef struct int1_ctrl { - /* Interrupt Controller 1 */ - u32 iprh1; /* 0x00 Pending Register High */ - u32 iprl1; /* 0x04 Pending Register Low */ - u32 imrh1; /* 0x08 Mask Register High */ - u32 imrl1; /* 0x0C Mask Register Low */ - u32 frch1; /* 0x10 Force Register High */ - u32 frcl1; /* 0x14 Force Register Low */ - u16 res1; /* 0x18 */ - u16 icfg1; /* 0x1A Configuration Register */ - u8 simr1; /* 0x1C Set Interrupt Mask */ - u8 cimr1; /* 0x1D Clear Interrupt Mask */ - u16 res2; /* 0x1E - 0x1F */ - u32 res3[8]; /* 0x20 - 0x3F */ - u8 icr1[64]; /* 0x40 - 0x7F */ - u32 res4[24]; /* 0x80 - 0xDF */ - u8 swiack1; /* 0xE0 Software Interrupt Acknowledge */ - u8 res5[3]; /* 0xE1 - 0xE3 */ - u8 Lniack1_1; /* 0xE4 Level n interrupt acknowledge resister */ - u8 res6[3]; /* 0xE5 - 0xE7 */ - u8 Lniack1_2; /* 0xE8 Level n interrupt acknowledge resister */ - u8 res7[3]; /* 0xE9 - 0xEB */ - u8 Lniack1_3; /* 0xEC Level n interrupt acknowledge resister */ - u8 res8[3]; /* 0xED - 0xEF */ - u8 Lniack1_4; /* 0xF0 Level n interrupt acknowledge resister */ - u8 res9[3]; /* 0xF1 - 0xF3 */ - u8 Lniack1_5; /* 0xF4 Level n interrupt acknowledge resister */ - u8 resa[3]; /* 0xF5 - 0xF7 */ - u8 Lniack1_6; /* 0xF8 Level n interrupt acknowledge resister */ - u8 resb[3]; /* 0xF9 - 0xFB */ - u8 Lniack1_7; /* 0xFC Level n interrupt acknowledge resister */ - u8 resc[3]; /* 0xFD - 0xFF */ -} int1_t; - -/* Global Interrupt Acknowledge (IACK) */ -typedef struct iack { - u8 resv0[0xE0]; - u8 gswiack; - u8 resv1[0x3]; - u8 gl1iack; - u8 resv2[0x3]; - u8 gl2iack; - u8 resv3[0x3]; - u8 gl3iack; - u8 resv4[0x3]; - u8 gl4iack; - u8 resv5[0x3]; - u8 gl5iack; - u8 resv6[0x3]; - u8 gl6iack; - u8 resv7[0x3]; - u8 gl7iack; -} iack_t; - -/* Edge Port Module (EPORT) */ -typedef struct eport { - u16 eppar; - u8 epddr; - u8 epier; - u8 epdr; - u8 eppdr; - u8 epfr; -} eport_t; - /* Watchdog Timer Modules (WTM) */ typedef struct wtm { u16 wcr; @@ -387,14 +241,6 @@ typedef struct gpio { u8 dscr_ata; /* ATA Drive Strength Control Register */ } gpio_t; -/* Random Number Generator (RNG) */ -typedef struct rng { - u32 rngcr; - u32 rngsr; - u32 rnger; - u32 rngout; -} rng_t; - /* SDRAM Controller (SDRAMC) */ typedef struct sdramc { u32 sdmr; /* SDRAM Mode/Extended Mode Register */ diff --git a/include/asm-m68k/immap_547x_8x.h b/include/asm-m68k/immap_547x_8x.h index c2219361d2..50f8b05d98 100644 --- a/include/asm-m68k/immap_547x_8x.h +++ b/include/asm-m68k/immap_547x_8x.h @@ -57,7 +57,11 @@ #define MMAP_SRAMCFG (CONFIG_SYS_MBAR + 0x0001FF00) #define MMAP_SEC (CONFIG_SYS_MBAR + 0x00020000) +#include <asm/coldfire/dspi.h> +#include <asm/coldfire/eport.h> #include <asm/coldfire/flexbus.h> +#include <asm/coldfire/flexcan.h> +#include <asm/coldfire/intctrl.h> typedef struct siu { u32 mbar; /* 0x00 */ @@ -98,37 +102,6 @@ typedef struct xlb_arb { u32 pri; /* 0x268 */ } xlbarb_t; -typedef struct int0_ctrl { - u32 iprh0; /* 0x00 */ - u32 iprl0; /* 0x04 */ - u32 imrh0; /* 0x08 */ - u32 imrl0; /* 0x0C */ - u32 frch0; /* 0x10 */ - u32 frcl0; /* 0x14 */ - u8 irlr; /* 0x18 */ - u8 iacklpr; /* 0x19 */ - u16 res1; /* 0x1A - 0x1B */ - u32 res2[9]; /* 0x1C - 0x3F */ - u8 icr0[64]; /* 0x40 - 0x7F */ - u32 res3[24]; /* 0x80 - 0xDF */ - u8 swiack0; /* 0xE0 */ - u8 res4[3]; /* 0xE1 - 0xE3 */ - u8 Lniack0_1; /* 0xE4 */ - u8 res5[3]; /* 0xE5 - 0xE7 */ - u8 Lniack0_2; /* 0xE8 */ - u8 res6[3]; /* 0xE9 - 0xEB */ - u8 Lniack0_3; /* 0xEC */ - u8 res7[3]; /* 0xED - 0xEF */ - u8 Lniack0_4; /* 0xF0 */ - u8 res8[3]; /* 0xF1 - 0xF3 */ - u8 Lniack0_5; /* 0xF4 */ - u8 res9[3]; /* 0xF5 - 0xF7 */ - u8 Lniack0_6; /* 0xF8 */ - u8 resa[3]; /* 0xF9 - 0xFB */ - u8 Lniack0_7; /* 0xFC */ - u8 resb[3]; /* 0xFD - 0xFF */ -} int0_t; - typedef struct gptmr { u8 ocpw; u8 octict; @@ -147,6 +120,11 @@ typedef struct gptmr { u8 intr; /* Interrupts */ } gptmr_t; +typedef struct canex_ctrl { + can_msg_t msg[16]; /* 0x00 Message Buffer 0-15 */ +} canex_t; + + typedef struct slt { u32 tcnt; /* 0x00 */ u32 cr; /* 0x04 */ diff --git a/include/asm-m68k/m5227x.h b/include/asm-m68k/m5227x.h index afd31ba3cf..824d333114 100644 --- a/include/asm-m68k/m5227x.h +++ b/include/asm-m68k/m5227x.h @@ -26,9 +26,7 @@ #ifndef __MCF5227X__ #define __MCF5227X__ -/********************************************************************* -* Interrupt Controller (INTC) -*********************************************************************/ +/* Interrupt Controller (INTC) */ #define INT0_LO_RSVD0 (0) #define INT0_LO_EPORT1 (1) #define INT0_LO_EPORT4 (4) @@ -98,235 +96,6 @@ #define INT1_HI_TOUCH_ADC (61) #define INT1_HI_PLL_LOCKS (62) -/* Bit definitions and macros for IPRH */ -#define INTC_IPRH_INT32 (0x00000001) -#define INTC_IPRH_INT33 (0x00000002) -#define INTC_IPRH_INT34 (0x00000004) -#define INTC_IPRH_INT35 (0x00000008) -#define INTC_IPRH_INT36 (0x00000010) -#define INTC_IPRH_INT37 (0x00000020) -#define INTC_IPRH_INT38 (0x00000040) -#define INTC_IPRH_INT39 (0x00000080) -#define INTC_IPRH_INT40 (0x00000100) -#define INTC_IPRH_INT41 (0x00000200) -#define INTC_IPRH_INT42 (0x00000400) -#define INTC_IPRH_INT43 (0x00000800) -#define INTC_IPRH_INT44 (0x00001000) -#define INTC_IPRH_INT45 (0x00002000) -#define INTC_IPRH_INT46 (0x00004000) -#define INTC_IPRH_INT47 (0x00008000) -#define INTC_IPRH_INT48 (0x00010000) -#define INTC_IPRH_INT49 (0x00020000) -#define INTC_IPRH_INT50 (0x00040000) -#define INTC_IPRH_INT51 (0x00080000) -#define INTC_IPRH_INT52 (0x00100000) -#define INTC_IPRH_INT53 (0x00200000) -#define INTC_IPRH_INT54 (0x00400000) -#define INTC_IPRH_INT55 (0x00800000) -#define INTC_IPRH_INT56 (0x01000000) -#define INTC_IPRH_INT57 (0x02000000) -#define INTC_IPRH_INT58 (0x04000000) -#define INTC_IPRH_INT59 (0x08000000) -#define INTC_IPRH_INT60 (0x10000000) -#define INTC_IPRH_INT61 (0x20000000) -#define INTC_IPRH_INT62 (0x40000000) -#define INTC_IPRH_INT63 (0x80000000) - -/* Bit definitions and macros for IPRL */ -#define INTC_IPRL_INT0 (0x00000001) -#define INTC_IPRL_INT1 (0x00000002) -#define INTC_IPRL_INT2 (0x00000004) -#define INTC_IPRL_INT3 (0x00000008) -#define INTC_IPRL_INT4 (0x00000010) -#define INTC_IPRL_INT5 (0x00000020) -#define INTC_IPRL_INT6 (0x00000040) -#define INTC_IPRL_INT7 (0x00000080) -#define INTC_IPRL_INT8 (0x00000100) -#define INTC_IPRL_INT9 (0x00000200) -#define INTC_IPRL_INT10 (0x00000400) -#define INTC_IPRL_INT11 (0x00000800) -#define INTC_IPRL_INT12 (0x00001000) -#define INTC_IPRL_INT13 (0x00002000) -#define INTC_IPRL_INT14 (0x00004000) -#define INTC_IPRL_INT15 (0x00008000) -#define INTC_IPRL_INT16 (0x00010000) -#define INTC_IPRL_INT17 (0x00020000) -#define INTC_IPRL_INT18 (0x00040000) -#define INTC_IPRL_INT19 (0x00080000) -#define INTC_IPRL_INT20 (0x00100000) -#define INTC_IPRL_INT21 (0x00200000) -#define INTC_IPRL_INT22 (0x00400000) -#define INTC_IPRL_INT23 (0x00800000) -#define INTC_IPRL_INT24 (0x01000000) -#define INTC_IPRL_INT25 (0x02000000) -#define INTC_IPRL_INT26 (0x04000000) -#define INTC_IPRL_INT27 (0x08000000) -#define INTC_IPRL_INT28 (0x10000000) -#define INTC_IPRL_INT29 (0x20000000) -#define INTC_IPRL_INT30 (0x40000000) -#define INTC_IPRL_INT31 (0x80000000) - -/* Bit definitions and macros for IMRH */ -#define INTC_IMRH_INT_MASK32 (0x00000001) -#define INTC_IMRH_INT_MASK33 (0x00000002) -#define INTC_IMRH_INT_MASK34 (0x00000004) -#define INTC_IMRH_INT_MASK35 (0x00000008) -#define INTC_IMRH_INT_MASK36 (0x00000010) -#define INTC_IMRH_INT_MASK37 (0x00000020) -#define INTC_IMRH_INT_MASK38 (0x00000040) -#define INTC_IMRH_INT_MASK39 (0x00000080) -#define INTC_IMRH_INT_MASK40 (0x00000100) -#define INTC_IMRH_INT_MASK41 (0x00000200) -#define INTC_IMRH_INT_MASK42 (0x00000400) -#define INTC_IMRH_INT_MASK43 (0x00000800) -#define INTC_IMRH_INT_MASK44 (0x00001000) -#define INTC_IMRH_INT_MASK45 (0x00002000) -#define INTC_IMRH_INT_MASK46 (0x00004000) -#define INTC_IMRH_INT_MASK47 (0x00008000) -#define INTC_IMRH_INT_MASK48 (0x00010000) -#define INTC_IMRH_INT_MASK49 (0x00020000) -#define INTC_IMRH_INT_MASK50 (0x00040000) -#define INTC_IMRH_INT_MASK51 (0x00080000) -#define INTC_IMRH_INT_MASK52 (0x00100000) -#define INTC_IMRH_INT_MASK53 (0x00200000) -#define INTC_IMRH_INT_MASK54 (0x00400000) -#define INTC_IMRH_INT_MASK55 (0x00800000) -#define INTC_IMRH_INT_MASK56 (0x01000000) -#define INTC_IMRH_INT_MASK57 (0x02000000) -#define INTC_IMRH_INT_MASK58 (0x04000000) -#define INTC_IMRH_INT_MASK59 (0x08000000) -#define INTC_IMRH_INT_MASK60 (0x10000000) -#define INTC_IMRH_INT_MASK61 (0x20000000) -#define INTC_IMRH_INT_MASK62 (0x40000000) -#define INTC_IMRH_INT_MASK63 (0x80000000) - -/* Bit definitions and macros for IMRL */ -#define INTC_IMRL_INT_MASK0 (0x00000001) -#define INTC_IMRL_INT_MASK1 (0x00000002) -#define INTC_IMRL_INT_MASK2 (0x00000004) -#define INTC_IMRL_INT_MASK3 (0x00000008) -#define INTC_IMRL_INT_MASK4 (0x00000010) -#define INTC_IMRL_INT_MASK5 (0x00000020) -#define INTC_IMRL_INT_MASK6 (0x00000040) -#define INTC_IMRL_INT_MASK7 (0x00000080) -#define INTC_IMRL_INT_MASK8 (0x00000100) -#define INTC_IMRL_INT_MASK9 (0x00000200) -#define INTC_IMRL_INT_MASK10 (0x00000400) -#define INTC_IMRL_INT_MASK11 (0x00000800) -#define INTC_IMRL_INT_MASK12 (0x00001000) -#define INTC_IMRL_INT_MASK13 (0x00002000) -#define INTC_IMRL_INT_MASK14 (0x00004000) -#define INTC_IMRL_INT_MASK15 (0x00008000) -#define INTC_IMRL_INT_MASK16 (0x00010000) -#define INTC_IMRL_INT_MASK17 (0x00020000) -#define INTC_IMRL_INT_MASK18 (0x00040000) -#define INTC_IMRL_INT_MASK19 (0x00080000) -#define INTC_IMRL_INT_MASK20 (0x00100000) -#define INTC_IMRL_INT_MASK21 (0x00200000) -#define INTC_IMRL_INT_MASK22 (0x00400000) -#define INTC_IMRL_INT_MASK23 (0x00800000) -#define INTC_IMRL_INT_MASK24 (0x01000000) -#define INTC_IMRL_INT_MASK25 (0x02000000) -#define INTC_IMRL_INT_MASK26 (0x04000000) -#define INTC_IMRL_INT_MASK27 (0x08000000) -#define INTC_IMRL_INT_MASK28 (0x10000000) -#define INTC_IMRL_INT_MASK29 (0x20000000) -#define INTC_IMRL_INT_MASK30 (0x40000000) -#define INTC_IMRL_INT_MASK31 (0x80000000) - -/* Bit definitions and macros for INTFRCH */ -#define INTC_INTFRCH_INTFRC32 (0x00000001) -#define INTC_INTFRCH_INTFRC33 (0x00000002) -#define INTC_INTFRCH_INTFRC34 (0x00000004) -#define INTC_INTFRCH_INTFRC35 (0x00000008) -#define INTC_INTFRCH_INTFRC36 (0x00000010) -#define INTC_INTFRCH_INTFRC37 (0x00000020) -#define INTC_INTFRCH_INTFRC38 (0x00000040) -#define INTC_INTFRCH_INTFRC39 (0x00000080) -#define INTC_INTFRCH_INTFRC40 (0x00000100) -#define INTC_INTFRCH_INTFRC41 (0x00000200) -#define INTC_INTFRCH_INTFRC42 (0x00000400) -#define INTC_INTFRCH_INTFRC43 (0x00000800) -#define INTC_INTFRCH_INTFRC44 (0x00001000) -#define INTC_INTFRCH_INTFRC45 (0x00002000) -#define INTC_INTFRCH_INTFRC46 (0x00004000) -#define INTC_INTFRCH_INTFRC47 (0x00008000) -#define INTC_INTFRCH_INTFRC48 (0x00010000) -#define INTC_INTFRCH_INTFRC49 (0x00020000) -#define INTC_INTFRCH_INTFRC50 (0x00040000) -#define INTC_INTFRCH_INTFRC51 (0x00080000) -#define INTC_INTFRCH_INTFRC52 (0x00100000) -#define INTC_INTFRCH_INTFRC53 (0x00200000) -#define INTC_INTFRCH_INTFRC54 (0x00400000) -#define INTC_INTFRCH_INTFRC55 (0x00800000) -#define INTC_INTFRCH_INTFRC56 (0x01000000) -#define INTC_INTFRCH_INTFRC57 (0x02000000) -#define INTC_INTFRCH_INTFRC58 (0x04000000) -#define INTC_INTFRCH_INTFRC59 (0x08000000) -#define INTC_INTFRCH_INTFRC60 (0x10000000) -#define INTC_INTFRCH_INTFRC61 (0x20000000) -#define INTC_INTFRCH_INTFRC62 (0x40000000) -#define INTC_INTFRCH_INTFRC63 (0x80000000) - -/* Bit definitions and macros for INTFRCL */ -#define INTC_INTFRCL_INTFRC0 (0x00000001) -#define INTC_INTFRCL_INTFRC1 (0x00000002) -#define INTC_INTFRCL_INTFRC2 (0x00000004) -#define INTC_INTFRCL_INTFRC3 (0x00000008) -#define INTC_INTFRCL_INTFRC4 (0x00000010) -#define INTC_INTFRCL_INTFRC5 (0x00000020) -#define INTC_INTFRCL_INTFRC6 (0x00000040) -#define INTC_INTFRCL_INTFRC7 (0x00000080) -#define INTC_INTFRCL_INTFRC8 (0x00000100) -#define INTC_INTFRCL_INTFRC9 (0x00000200) -#define INTC_INTFRCL_INTFRC10 (0x00000400) -#define INTC_INTFRCL_INTFRC11 (0x00000800) -#define INTC_INTFRCL_INTFRC12 (0x00001000) -#define INTC_INTFRCL_INTFRC13 (0x00002000) -#define INTC_INTFRCL_INTFRC14 (0x00004000) -#define INTC_INTFRCL_INTFRC15 (0x00008000) -#define INTC_INTFRCL_INTFRC16 (0x00010000) -#define INTC_INTFRCL_INTFRC17 (0x00020000) -#define INTC_INTFRCL_INTFRC18 (0x00040000) -#define INTC_INTFRCL_INTFRC19 (0x00080000) -#define INTC_INTFRCL_INTFRC20 (0x00100000) -#define INTC_INTFRCL_INTFRC21 (0x00200000) -#define INTC_INTFRCL_INTFRC22 (0x00400000) -#define INTC_INTFRCL_INTFRC23 (0x00800000) -#define INTC_INTFRCL_INTFRC24 (0x01000000) -#define INTC_INTFRCL_INTFRC25 (0x02000000) -#define INTC_INTFRCL_INTFRC26 (0x04000000) -#define INTC_INTFRCL_INTFRC27 (0x08000000) -#define INTC_INTFRCL_INTFRC28 (0x10000000) -#define INTC_INTFRCL_INTFRC29 (0x20000000) -#define INTC_INTFRCL_INTFRC30 (0x40000000) -#define INTC_INTFRCL_INTFRC31 (0x80000000) - -/* Bit definitions and macros for ICONFIG */ -#define INTC_ICONFIG_EMASK (0x0020) -#define INTC_ICONFIG_ELVLPRI1 (0x0200) -#define INTC_ICONFIG_ELVLPRI2 (0x0400) -#define INTC_ICONFIG_ELVLPRI3 (0x0800) -#define INTC_ICONFIG_ELVLPRI4 (0x1000) -#define INTC_ICONFIG_ELVLPRI5 (0x2000) -#define INTC_ICONFIG_ELVLPRI6 (0x4000) -#define INTC_ICONFIG_ELVLPRI7 (0x8000) - -/* Bit definitions and macros for SIMR */ -#define INTC_SIMR_SIMR(x) (((x)&0x7F)) - -/* Bit definitions and macros for CIMR */ -#define INTC_CIMR_CIMR(x) (((x)&0x7F)) - -/* Bit definitions and macros for CLMASK */ -#define INTC_CLMASK_CLMASK(x) (((x)&0x0F)) - -/* Bit definitions and macros for SLMASK */ -#define INTC_SLMASK_SLMASK(x) (((x)&0x0F)) - -/* Bit definitions and macros for ICR group */ -#define INTC_ICR_IL(x) (((x)&0x07)) - /********************************************************************* * Reset Controller Module (RCM) *********************************************************************/ @@ -513,8 +282,8 @@ /* Bit definitions and macros for PAR_DSPI */ #define GPIO_PAR_DSPI_PCS0_MASK (0x3F) -#define GPIO_PAR_DSPI_PCS0_PCS0 (0x80) -#define GPIO_PAR_DSPI_PCS0_U2RTS (0x40) +#define GPIO_PAR_DSPI_PCS0_PCS0 (0xC0) +#define GPIO_PAR_DSPI_PCS0_U2RTS (0x80) #define GPIO_PAR_DSPI_PCS0_GPIO (0x00) #define GPIO_PAR_DSPI_SIN_MASK (0xCF) #define GPIO_PAR_DSPI_SIN_SIN (0x30) diff --git a/include/asm-m68k/m5235.h b/include/asm-m68k/m5235.h index b98b452ca9..22987ac778 100644 --- a/include/asm-m68k/m5235.h +++ b/include/asm-m68k/m5235.h @@ -163,94 +163,6 @@ #define SDRAMC_DMRn_V (0x00000001) /********************************************************************* -* FlexBus Chip Selects (FBCS) -*********************************************************************/ -/* Bit definitions and macros for FBCS_CSMR */ -#define FBCS_CSMR_BAM(x) (((x)&0xFFFF)<<16) -#define FBCS_CSMR_BAM_4G (0xFFFF0000) -#define FBCS_CSMR_BAM_2G (0x7FFF0000) -#define FBCS_CSMR_BAM_1G (0x3FFF0000) -#define FBCS_CSMR_BAM_1024M (0x3FFF0000) -#define FBCS_CSMR_BAM_512M (0x1FFF0000) -#define FBCS_CSMR_BAM_256M (0x0FFF0000) -#define FBCS_CSMR_BAM_128M (0x07FF0000) -#define FBCS_CSMR_BAM_64M (0x03FF0000) -#define FBCS_CSMR_BAM_32M (0x01FF0000) -#define FBCS_CSMR_BAM_16M (0x00FF0000) -#define FBCS_CSMR_BAM_8M (0x007F0000) -#define FBCS_CSMR_BAM_4M (0x003F0000) -#define FBCS_CSMR_BAM_2M (0x001F0000) -#define FBCS_CSMR_BAM_1M (0x000F0000) -#define FBCS_CSMR_BAM_1024K (0x000F0000) -#define FBCS_CSMR_BAM_512K (0x00070000) -#define FBCS_CSMR_BAM_256K (0x00030000) -#define FBCS_CSMR_BAM_128K (0x00010000) -#define FBCS_CSMR_BAM_64K (0x00000000) -#define FBCS_CSMR_WP (0x00000100) -#define FBCS_CSMR_V (0x00000001) - -/* Bit definitions and macros for FBCS_CSCR */ -#define FBCS_CSCR_SRWS(x) (((x)&0x03)<<14) -#define FBCS_CSCR_IWS(x) (((x)&0x0F)<<10) -#define FBCS_CSCR_AA (0x0100) -#define FBCS_CSCR_PS_MASK (0x00C0) -#define FBCS_CSCR_PS_32 (0x0000) -#define FBCS_CSCR_PS_16 (0x0080) -#define FBCS_CSCR_PS_8 (0x0040) -#define FBCS_CSCR_BEM (0x0020) -#define FBCS_CSCR_BSTR (0x0010) -#define FBCS_CSCR_BSTW (0x0008) -#define FBCS_CSCR_SWWS(x) ((x)&0x07) - -/********************************************************************* -* Queued Serial Peripheral Interface (QSPI) -*********************************************************************/ -/* Bit definitions and macros for QSPI_QMR */ -#define QSPI_QMR_MSTR (0x8000) -#define QSPI_QMR_DOHIE (0x4000) -#define QSPI_QMR_BITS(x) (((x)&0x000F)<<10) -#define QSPI_QMR_CPOL (0x0200) -#define QSPI_QMR_CPHA (0x0100) -#define QSPI_QMR_BAUD(x) ((x)&0x00FF) - -/* Bit definitions and macros for QSPI_QDLYR */ -#define QSPI_QDLYR_SPE (0x8000) -#define QSPI_QDLYR_QCD(x) (((x)&0x007F)<<8) -#define QSPI_QDLYR_DTL(x) ((x)&0x00FF) - -/* Bit definitions and macros for QSPI_QWR */ -#define QSPI_QWR_HALT (0x8000) -#define QSPI_QWR_WREN (0x4000) -#define QSPI_QWR_WRTO (0x2000) -#define QSPI_QWR_CSIV (0x1000) -#define QSPI_QWR_ENDQP(x) (((x)&0x000F)<<8) -#define QSPI_QWR_NEWQP(x) ((x)&0x000F) - -/* Bit definitions and macros for QSPI_QIR */ -#define QSPI_QIR_WCEFB (0x8000) -#define QSPI_QIR_ABRTB (0x4000) -#define QSPI_QIR_ABRTL (0x1000) -#define QSPI_QIR_WCEFE (0x0800) -#define QSPI_QIR_ABRTE (0x0400) -#define QSPI_QIR_SPIFE (0x0100) -#define QSPI_QIR_WCEF (0x0008) -#define QSPI_QIR_ABRT (0x0004) -#define QSPI_QIR_SPIF (0x0001) - -/* Bit definitions and macros for QSPI_QAR */ -#define QSPI_QAR_ADDR(x) ((x)&0x003F) - -/* Bit definitions and macros for QSPI_QDR */ -#define QSPI_QDR_CONT (0x8000) -#define QSPI_QDR_BITSE (0x4000) -#define QSPI_QDR_DT (0x2000) -#define QSPI_QDR_DSCK (0x1000) -#define QSPI_QDR_QSPI_CS3 (0x0800) -#define QSPI_QDR_QSPI_CS2 (0x0400) -#define QSPI_QDR_QSPI_CS1 (0x0200) -#define QSPI_QDR_QSPI_CS0 (0x0100) - -/********************************************************************* * Interrupt Controller (INTC) *********************************************************************/ #define INT0_LO_RSVD0 (0) @@ -370,85 +282,6 @@ #define INT1_HI_ETPU_TC31F (58) #define INT1_HI_ETPU_TGIF (59) -/* Bit definitions and macros for INTC_IPRH */ -#define INTC_IPRH_INT63 (0x80000000) -#define INTC_IPRH_INT62 (0x40000000) -#define INTC_IPRH_INT61 (0x20000000) -#define INTC_IPRH_INT60 (0x10000000) -#define INTC_IPRH_INT59 (0x08000000) -#define INTC_IPRH_INT58 (0x04000000) -#define INTC_IPRH_INT57 (0x02000000) -#define INTC_IPRH_INT56 (0x01000000) -#define INTC_IPRH_INT55 (0x00800000) -#define INTC_IPRH_INT54 (0x00400000) -#define INTC_IPRH_INT53 (0x00200000) -#define INTC_IPRH_INT52 (0x00100000) -#define INTC_IPRH_INT51 (0x00080000) -#define INTC_IPRH_INT50 (0x00040000) -#define INTC_IPRH_INT49 (0x00020000) -#define INTC_IPRH_INT48 (0x00010000) -#define INTC_IPRH_INT47 (0x00008000) -#define INTC_IPRH_INT46 (0x00004000) -#define INTC_IPRH_INT45 (0x00002000) -#define INTC_IPRH_INT44 (0x00001000) -#define INTC_IPRH_INT43 (0x00000800) -#define INTC_IPRH_INT42 (0x00000400) -#define INTC_IPRH_INT41 (0x00000200) -#define INTC_IPRH_INT40 (0x00000100) -#define INTC_IPRH_INT39 (0x00000080) -#define INTC_IPRH_INT38 (0x00000040) -#define INTC_IPRH_INT37 (0x00000020) -#define INTC_IPRH_INT36 (0x00000010) -#define INTC_IPRH_INT35 (0x00000008) -#define INTC_IPRH_INT34 (0x00000004) -#define INTC_IPRH_INT33 (0x00000002) -#define INTC_IPRH_INT32 (0x00000001) - -/* Bit definitions and macros for INTC_IPRL */ -#define INTC_IPRL_INT31 (0x80000000) -#define INTC_IPRL_INT30 (0x40000000) -#define INTC_IPRL_INT29 (0x20000000) -#define INTC_IPRL_INT28 (0x10000000) -#define INTC_IPRL_INT27 (0x08000000) -#define INTC_IPRL_INT26 (0x04000000) -#define INTC_IPRL_INT25 (0x02000000) -#define INTC_IPRL_INT24 (0x01000000) -#define INTC_IPRL_INT23 (0x00800000) -#define INTC_IPRL_INT22 (0x00400000) -#define INTC_IPRL_INT21 (0x00200000) -#define INTC_IPRL_INT20 (0x00100000) -#define INTC_IPRL_INT19 (0x00080000) -#define INTC_IPRL_INT18 (0x00040000) -#define INTC_IPRL_INT17 (0x00020000) -#define INTC_IPRL_INT16 (0x00010000) -#define INTC_IPRL_INT15 (0x00008000) -#define INTC_IPRL_INT14 (0x00004000) -#define INTC_IPRL_INT13 (0x00002000) -#define INTC_IPRL_INT12 (0x00001000) -#define INTC_IPRL_INT11 (0x00000800) -#define INTC_IPRL_INT10 (0x00000400) -#define INTC_IPRL_INT9 (0x00000200) -#define INTC_IPRL_INT8 (0x00000100) -#define INTC_IPRL_INT7 (0x00000080) -#define INTC_IPRL_INT6 (0x00000040) -#define INTC_IPRL_INT5 (0x00000020) -#define INTC_IPRL_INT4 (0x00000010) -#define INTC_IPRL_INT3 (0x00000008) -#define INTC_IPRL_INT2 (0x00000004) -#define INTC_IPRL_INT1 (0x00000002) -#define INTC_IPRL_INT0 (0x00000001) - -/* Bit definitions and macros for INTC_IRLR */ -#define INTC_IRLRn(x) (((x)&0x7F)<<1) - -/* Bit definitions and macros for INTC_IACKLPRn */ -#define INTC_IACKLPRn_LEVEL(x) (((x)&0x07)<<4) -#define INTC_IACKLPRn_PRI(x) ((x)&0x0F) - -/* Bit definitions and macros for INTC_ICRnx */ -#define INTC_ICRnx_IL(x) (((x)&0x07)<<3) -#define INTC_ICRnx_IP(x) ((x)&0x07) - /********************************************************************* * General Purpose I/O (GPIO) *********************************************************************/ @@ -758,49 +591,6 @@ #define PLL_SYNSR_CALPASS (0x00000001) /********************************************************************* - * Edge Port -*********************************************************************/ -#define EPORT_EPPAR_EPPA7(x) (((x)&0x03)<<14) -#define EPORT_EPPAR_EPPA6(x) (((x)&0x03)<<12) -#define EPORT_EPPAR_EPPA5(x) (((x)&0x03)<<10) -#define EPORT_EPPAR_EPPA4(x) (((x)&0x03)<<8) -#define EPORT_EPPAR_EPPA3(x) (((x)&0x03)<<6) -#define EPORT_EPPAR_EPPA2(x) (((x)&0x03)<<4) -#define EPORT_EPPAR_EPPA1(x) (((x)&0x03)<<2) - -#define EPORT_EPDDR_EPDD7(x) EPORT_EPPAR_EPPA7(x) -#define EPORT_EPDDR_EPDD6(x) EPORT_EPPAR_EPPA6(x) -#define EPORT_EPDDR_EPDD5(x) EPORT_EPPAR_EPPA5(x) -#define EPORT_EPDDR_EPDD4(x) EPORT_EPPAR_EPPA4(x) -#define EPORT_EPDDR_EPDD3(x) EPORT_EPPAR_EPPA3(x) -#define EPORT_EPDDR_EPDD2(x) EPORT_EPPAR_EPPA2(x) -#define EPORT_EPDDR_EPDD1(x) EPORT_EPPAR_EPPA1(x) - -#define EPORT_EPIER_EPIE7 (0x80) -#define EPORT_EPIER_EPIE6 (0x40) -#define EPORT_EPIER_EPIE5 (0x20) -#define EPORT_EPIER_EPIE4 (0x10) -#define EPORT_EPIER_EPIE3 (0x08) -#define EPORT_EPIER_EPIE2 (0x04) -#define EPORT_EPIER_EPIE1 (0x02) - -#define EPORT_EPDR_EPDR7 EPORT_EPIER_EPIE7 -#define EPORT_EPDR_EPDR6 EPORT_EPIER_EPIE6 -#define EPORT_EPDR_EPDR5 EPORT_EPIER_EPIE5 -#define EPORT_EPDR_EPDR4 EPORT_EPIER_EPIE4 -#define EPORT_EPDR_EPDR3 EPORT_EPIER_EPIE3 -#define EPORT_EPDR_EPDR2 EPORT_EPIER_EPIE2 -#define EPORT_EPDR_EPDR1 EPORT_EPIER_EPIE1 - -#define EPORT_EPPDR_EPPDR7 EPORT_EPIER_EPIE7 -#define EPORT_EPPDR_EPPDR6 EPORT_EPIER_EPIE6 -#define EPORT_EPPDR_EPPDR5 EPORT_EPIER_EPIE5 -#define EPORT_EPPDR_EPPDR4 EPORT_EPIER_EPIE4 -#define EPORT_EPPDR_EPPDR3 EPORT_EPIER_EPIE3 -#define EPORT_EPPDR_EPPDR2 EPORT_EPIER_EPIE2 -#define EPORT_EPPDR_EPPDR1 EPORT_EPIER_EPIE1 - -/********************************************************************* * Watchdog Timer Modules (WTM) *********************************************************************/ /* Bit definitions and macros for WTM_WCR */ @@ -809,97 +599,4 @@ #define WTM_WCR_HALTED (0x0002) #define WTM_WCR_EN (0x0001) -/********************************************************************* -* FlexCAN Module (CAN) -*********************************************************************/ -/* Bit definitions and macros for CAN_CANMCR */ -#define CANMCR_MDIS (0x80000000) -#define CANMCR_FRZ (0x40000000) -#define CANMCR_HALT (0x10000000) -#define CANMCR_NORDY (0x08000000) -#define CANMCR_SOFTRST (0x02000000) -#define CANMCR_FRZACK (0x01000000) -#define CANMCR_SUPV (0x00800000) -#define CANMCR_LPMACK (0x00100000) -#define CANMCR_MAXMB(x) (((x)&0x0F)) - -/* Bit definitions and macros for CAN_CANCTRL */ -#define CANCTRL_PRESDIV(x) (((x)&0xFF)<<24) -#define CANCTRL_RJW(x) (((x)&0x03)<<22) -#define CANCTRL_PSEG1(x) (((x)&0x07)<<19) -#define CANCTRL_PSEG2(x) (((x)&0x07)<<16) -#define CANCTRL_BOFFMSK (0x00008000) -#define CANCTRL_ERRMSK (0x00004000) -#define CANCTRL_CLKSRC (0x00002000) -#define CANCTRL_LPB (0x00001000) -#define CANCTRL_SMP (0x00000080) -#define CANCTRL_BOFFREC (0x00000040) -#define CANCTRL_TSYNC (0x00000020) -#define CANCTRL_LBUF (0x00000010) -#define CANCTRL_LOM (0x00000008) -#define CANCTRL_PROPSEG(x) (((x)&0x07)) - -/* Bit definitions and macros for CAN_TIMER */ -#define TIMER_TIMER(x) ((x)&0xFFFF) - -/* Bit definitions and macros for CAN_RXGMASK */ -#define RXGMASK_MI(x) ((x)&0x1FFFFFFF) - -/* Bit definitions and macros for CAN_ERRCNT */ -#define ERRCNT_TXECTR(x) (((x)&0xFF)) -#define ERRCNT_RXECTR(x) (((x)&0xFF)<<8) - -/* Bit definitions and macros for CAN_ERRSTAT */ -#define ERRSTAT_BITERR1 (0x00008000) -#define ERRSTAT_BITERR0 (0x00004000) -#define ERRSTAT_ACKERR (0x00002000) -#define ERRSTAT_CRCERR (0x00001000) -#define ERRSTAT_FRMERR (0x00000800) -#define ERRSTAT_STFERR (0x00000400) -#define ERRSTAT_TXWRN (0x00000200) -#define ERRSTAT_RXWRN (0x00000100) -#define ERRSTAT_IDLE (0x00000080) -#define ERRSTAT_TXRX (0x00000040) -#define ERRSTAT_FLT_BUSOFF (0x00000020) -#define ERRSTAT_FLT_PASSIVE (0x00000010) -#define ERRSTAT_FLT_ACTIVE (0x00000000) -#define ERRSTAT_BOFFINT (0x00000004) -#define ERRSTAT_ERRINT (0x00000002) - -/* Bit definitions and macros for CAN_IMASK */ -#define IMASK_BUF15M (0x00008000) -#define IMASK_BUF14M (0x00004000) -#define IMASK_BUF13M (0x00002000) -#define IMASK_BUF12M (0x00001000) -#define IMASK_BUF11M (0x00000800) -#define IMASK_BUF10M (0x00000400) -#define IMASK_BUF9M (0x00000200) -#define IMASK_BUF8M (0x00000100) -#define IMASK_BUF7M (0x00000080) -#define IMASK_BUF6M (0x00000040) -#define IMASK_BUF5M (0x00000020) -#define IMASK_BUF4M (0x00000010) -#define IMASK_BUF3M (0x00000008) -#define IMASK_BUF2M (0x00000004) -#define IMASK_BUF1M (0x00000002) -#define IMASK_BUF0M (0x00000001) - -/* Bit definitions and macros for CAN_IFLAG */ -#define IFLAG_BUF15I (0x00008000) -#define IFLAG_BUF14I (0x00004000) -#define IFLAG_BUF13I (0x00002000) -#define IFLAG_BUF12I (0x00001000) -#define IFLAG_BUF11I (0x00000800) -#define IFLAG_BUF10I (0x00000400) -#define IFLAG_BUF9I (0x00000200) -#define IFLAG_BUF8I (0x00000100) -#define IFLAG_BUF7I (0x00000080) -#define IFLAG_BUF6I (0x00000040) -#define IFLAG_BUF5I (0x00000020) -#define IFLAG_BUF4I (0x00000010) -#define IFLAG_BUF3I (0x00000008) -#define IFLAG_BUF2I (0x00000004) -#define IFLAG_BUF1I (0x00000002) -#define IFLAG_BUF0I (0x00000001) - #endif /* mcf5235_h */ diff --git a/include/asm-m68k/m5249.h b/include/asm-m68k/m5249.h index feb675c41b..fa0cb14dae 100644 --- a/include/asm-m68k/m5249.h +++ b/include/asm-m68k/m5249.h @@ -77,19 +77,6 @@ #define MCFSIM_IPR 0x40 /* Interrupt Pend reg (r/w) */ #define MCFSIM_IMR 0x44 /* Interrupt Mask reg (r/w) */ -#define MCFSIM_CSAR0 0x80 /* CS 0 Address 0 reg (r/w) */ -#define MCFSIM_CSMR0 0x84 /* CS 0 Mask 0 reg (r/w) */ -#define MCFSIM_CSCR0 0x8a /* CS 0 Control reg (r/w) */ -#define MCFSIM_CSAR1 0x8c /* CS 1 Address reg (r/w) */ -#define MCFSIM_CSMR1 0x90 /* CS 1 Mask reg (r/w) */ -#define MCFSIM_CSCR1 0x96 /* CS 1 Control reg (r/w) */ -#define MCFSIM_CSAR2 0x98 /* CS 2 Address reg (r/w) */ -#define MCFSIM_CSMR2 0x9c /* CS 2 Mask reg (r/w) */ -#define MCFSIM_CSCR2 0xa2 /* CS 2 Control reg (r/w) */ -#define MCFSIM_CSAR3 0xa4 /* CS 3 Address reg (r/w) */ -#define MCFSIM_CSMR3 0xa8 /* CS 3 Mask reg (r/w) */ -#define MCFSIM_CSCR3 0xae /* CS 3 Control reg (r/w) */ - #define MCFSIM_DCR 0x100 /* DRAM Control reg (r/w) */ #define MCFSIM_DACR0 0x108 /* DRAM 0 Addr and Ctrl (r/w) */ #define MCFSIM_DMR0 0x10c /* DRAM 0 Mask reg (r/w) */ diff --git a/include/asm-m68k/m5271.h b/include/asm-m68k/m5271.h index 000f0a5e97..7877616894 100644 --- a/include/asm-m68k/m5271.h +++ b/include/asm-m68k/m5271.h @@ -116,9 +116,7 @@ #define MCFSIM_ICR1 0x000C41 -/********************************************************************* -* Interrupt Controller (INTC) -*********************************************************************/ +/* Interrupt Controller (INTC) */ #define INT0_LO_RSVD0 (0) #define INT0_LO_EPORT1 (1) #define INT0_LO_EPORT2 (2) @@ -182,38 +180,4 @@ #define INT0_HI_CAN1_BOFFINT (60) /* 60-63 Reserved */ -/* Bit definitions and macros for INTC_IPRL */ -#define INTC_IPRL_INT31 (0x80000000) -#define INTC_IPRL_INT30 (0x40000000) -#define INTC_IPRL_INT29 (0x20000000) -#define INTC_IPRL_INT28 (0x10000000) -#define INTC_IPRL_INT27 (0x08000000) -#define INTC_IPRL_INT26 (0x04000000) -#define INTC_IPRL_INT25 (0x02000000) -#define INTC_IPRL_INT24 (0x01000000) -#define INTC_IPRL_INT23 (0x00800000) -#define INTC_IPRL_INT22 (0x00400000) -#define INTC_IPRL_INT21 (0x00200000) -#define INTC_IPRL_INT20 (0x00100000) -#define INTC_IPRL_INT19 (0x00080000) -#define INTC_IPRL_INT18 (0x00040000) -#define INTC_IPRL_INT17 (0x00020000) -#define INTC_IPRL_INT16 (0x00010000) -#define INTC_IPRL_INT15 (0x00008000) -#define INTC_IPRL_INT14 (0x00004000) -#define INTC_IPRL_INT13 (0x00002000) -#define INTC_IPRL_INT12 (0x00001000) -#define INTC_IPRL_INT11 (0x00000800) -#define INTC_IPRL_INT10 (0x00000400) -#define INTC_IPRL_INT9 (0x00000200) -#define INTC_IPRL_INT8 (0x00000100) -#define INTC_IPRL_INT7 (0x00000080) -#define INTC_IPRL_INT6 (0x00000040) -#define INTC_IPRL_INT5 (0x00000020) -#define INTC_IPRL_INT4 (0x00000010) -#define INTC_IPRL_INT3 (0x00000008) -#define INTC_IPRL_INT2 (0x00000004) -#define INTC_IPRL_INT1 (0x00000002) -#define INTC_IPRL_INT0 (0x00000001) - #endif /* _MCF5271_H_ */ diff --git a/include/asm-m68k/m5275.h b/include/asm-m68k/m5275.h index 89c6c92594..24dbae2533 100644 --- a/include/asm-m68k/m5275.h +++ b/include/asm-m68k/m5275.h @@ -30,18 +30,6 @@ * Define the 5275 SIM register set addresses. These are similar, * but not quite identical to the 5282 registers and offsets. */ -#define MCFICM_INTC0 0x0c00 /* Base for Interrupt Ctrl 0 */ -#define MCFICM_INTC1 0x0d00 /* Base for Interrupt Ctrl 1 */ -#define MCFINTC_IPRH 0x00 /* Interrupt pending 32-63 */ -#define MCFINTC_IPRL 0x04 /* Interrupt pending 1-31 */ -#define MCFINTC_IMRH 0x08 /* Interrupt mask 32-63 */ -#define MCFINTC_IMRL 0x0c /* Interrupt mask 1-31 */ -#define MCFINTC_INTFRCH 0x10 /* Interrupt force 32-63 */ -#define MCFINTC_INTFRCL 0x14 /* Interrupt force 1-31 */ -#define MCFINTC_IRLR 0x18 /* */ -#define MCFINTC_IACKL 0x19 /* */ -#define MCFINTC_ICR0 0x40 /* Base ICR register */ - #define MCF_GPIO_PAR_UART 0x10007c #define UART0_ENABLE_MASK 0x000f #define UART1_ENABLE_MASK 0x00f0 @@ -198,40 +186,6 @@ #define INT1_HI_FEC1_BABR (35) /* 36-63 Reserved */ -/* Bit definitions and macros for INTC_IPRL */ -#define INTC_IPRL_INT31 (0x80000000) -#define INTC_IPRL_INT30 (0x40000000) -#define INTC_IPRL_INT29 (0x20000000) -#define INTC_IPRL_INT28 (0x10000000) -#define INTC_IPRL_INT27 (0x08000000) -#define INTC_IPRL_INT26 (0x04000000) -#define INTC_IPRL_INT25 (0x02000000) -#define INTC_IPRL_INT24 (0x01000000) -#define INTC_IPRL_INT23 (0x00800000) -#define INTC_IPRL_INT22 (0x00400000) -#define INTC_IPRL_INT21 (0x00200000) -#define INTC_IPRL_INT20 (0x00100000) -#define INTC_IPRL_INT19 (0x00080000) -#define INTC_IPRL_INT18 (0x00040000) -#define INTC_IPRL_INT17 (0x00020000) -#define INTC_IPRL_INT16 (0x00010000) -#define INTC_IPRL_INT15 (0x00008000) -#define INTC_IPRL_INT14 (0x00004000) -#define INTC_IPRL_INT13 (0x00002000) -#define INTC_IPRL_INT12 (0x00001000) -#define INTC_IPRL_INT11 (0x00000800) -#define INTC_IPRL_INT10 (0x00000400) -#define INTC_IPRL_INT9 (0x00000200) -#define INTC_IPRL_INT8 (0x00000100) -#define INTC_IPRL_INT7 (0x00000080) -#define INTC_IPRL_INT6 (0x00000040) -#define INTC_IPRL_INT5 (0x00000020) -#define INTC_IPRL_INT4 (0x00000010) -#define INTC_IPRL_INT3 (0x00000008) -#define INTC_IPRL_INT2 (0x00000004) -#define INTC_IPRL_INT1 (0x00000002) -#define INTC_IPRL_INT0 (0x00000001) - /* Bit definitions and macros for RCR */ #define RCM_RCR_FRCRSTOUT (0x40) #define RCM_RCR_SOFTRST (0x80) diff --git a/include/asm-m68k/m5282.h b/include/asm-m68k/m5282.h index 772c7e0e5e..d59a8b2c31 100644 --- a/include/asm-m68k/m5282.h +++ b/include/asm-m68k/m5282.h @@ -440,29 +440,6 @@ #define MCFWTM_WCNTR (*(vu_short *)(CONFIG_SYS_MBAR+0x00140004)) #define MCFWTM_WSR (*(vu_short *)(CONFIG_SYS_MBAR+0x00140006)) -/* Chip SELECT Module CSM */ -#define MCFCSM_CSAR0 (*(vu_short *)(CONFIG_SYS_MBAR+0x00000080)) -#define MCFCSM_CSMR0 (*(vu_long *) (CONFIG_SYS_MBAR+0x00000084)) -#define MCFCSM_CSCR0 (*(vu_short *)(CONFIG_SYS_MBAR+0x0000008a)) -#define MCFCSM_CSAR1 (*(vu_short *)(CONFIG_SYS_MBAR+0x0000008C)) -#define MCFCSM_CSMR1 (*(vu_long *) (CONFIG_SYS_MBAR+0x00000090)) -#define MCFCSM_CSCR1 (*(vu_short *)(CONFIG_SYS_MBAR+0x00000096)) -#define MCFCSM_CSAR2 (*(vu_short *)(CONFIG_SYS_MBAR+0x00000098)) -#define MCFCSM_CSMR2 (*(vu_long *) (CONFIG_SYS_MBAR+0x0000009C)) -#define MCFCSM_CSCR2 (*(vu_short *)(CONFIG_SYS_MBAR+0x000000A2)) -#define MCFCSM_CSAR3 (*(vu_short *)(CONFIG_SYS_MBAR+0x000000A4)) -#define MCFCSM_CSMR3 (*(vu_long *) (CONFIG_SYS_MBAR+0x000000A8)) -#define MCFCSM_CSCR3 (*(vu_short *)(CONFIG_SYS_MBAR+0x000000AE)) - -#define MCFCSM_CSMR_BAM(x) ((x) & 0xFFFF0000) -#define MCFCSM_CSMR_WP (1<<8) -#define MCFCSM_CSMR_V (0x01) -#define MCFCSM_CSCR_WS(x) ((x & 0x0F)<<10) -#define MCFCSM_CSCR_AA (0x0100) -#define MCFCSM_CSCR_PS_32 (0x0000) -#define MCFCSM_CSCR_PS_8 (0x0040) -#define MCFCSM_CSCR_PS_16 (0x0080) - /********************************************************************* * General Purpose Timer (GPT) Module *********************************************************************/ diff --git a/include/asm-m68k/m5301x.h b/include/asm-m68k/m5301x.h new file mode 100644 index 0000000000..52bbb87e27 --- /dev/null +++ b/include/asm-m68k/m5301x.h @@ -0,0 +1,604 @@ +/* + * m5301x.h -- Definitions for Freescale Coldfire 5301x + * + * Copyright (C) 2004-2008 Freescale Semiconductor, Inc. + * TsiChung Liew (Tsi-Chung.Liew@freescale.com) + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef m5301x_h +#define m5301x_h + +/* *** System Control Module (SCM) *** */ +#define SCM_MPR_MPROT0(x) (((x) & 0x0F) << 28) +#define SCM_MPR_MPROT1(x) (((x) & 0x0F) << 24) +#define SCM_MPR_MPROT2(x) (((x) & 0x0F) << 20) +#define SCM_MPR_MPROT4(x) (((x) & 0x0F) << 12) +#define SCM_MPR_MPROT5(x) (((x) & 0x0F) << 8) +#define SCM_MPR_MPROT6(x) (((x) & 0x0F) << 4) +#define MPROT_MTR 4 +#define MPROT_MTW 2 +#define MPROT_MPL 1 + +#define SCM_PACRA_PACR0(x) (((x) & 0x0F) << 28) +#define SCM_PACRA_PACR1(x) (((x) & 0x0F) << 24) +#define SCM_PACRA_PACR2(x) (((x) & 0x0F) << 20) +#define SCM_PACRA_PACR5(x) (((x) & 0x0F) << 8) + +#define SCM_PACRB_PACR12(x) (((x) & 0x0F) << 12) +#define SCM_PACRB_PACR13(x) (((x) & 0x0F) << 8) + +#define SCM_PACRC_PACR16(x) (((x) & 0x0F) << 28) +#define SCM_PACRC_PACR17(x) (((x) & 0x0F) << 24) +#define SCM_PACRC_PACR18(x) (((x) & 0x0F) << 20) +#define SCM_PACRC_PACR19(x) (((x) & 0x0F) << 16) +#define SCM_PACRC_PACR21(x) (((x) & 0x0F) << 8) +#define SCM_PACRC_PACR22(x) (((x) & 0x0F) << 4) +#define SCM_PACRC_PACR23(x) ((x) & 0x0F) + +#define SCM_PACRD_PACR24(x) (((x) & 0x0F) << 28) +#define SCM_PACRD_PACR25(x) (((x) & 0x0F) << 24) +#define SCM_PACRD_PACR26(x) (((x) & 0x0F) << 20) +#define SCM_PACRD_PACR28(x) (((x) & 0x0F) << 12) +#define SCM_PACRD_PACR29(x) (((x) & 0x0F) << 8) +#define SCM_PACRD_PACR30(x) (((x) & 0x0F) << 4) +#define SCM_PACRD_PACR31(x) ((x) & 0x0F) + +#define SCM_PACRE_PACR32(x) (((x) & 0x0F) << 28) +#define SCM_PACRE_PACR33(x) (((x) & 0x0F) << 24) +#define SCM_PACRE_PACR34(x) (((x) & 0x0F) << 20) +#define SCM_PACRE_PACR35(x) (((x) & 0x0F) << 16) +#define SCM_PACRE_PACR36(x) (((x) & 0x0F) << 12) +#define SCM_PACRE_PACR37(x) (((x) & 0x0F) << 8) +#define SCM_PACRE_PACR39(x) ((x) & 0x0F) + +#define SCM_PACRF_PACR40(x) (((x) & 0x0F) << 28) +#define SCM_PACRF_PACR41(x) (((x) & 0x0F) << 24) +#define SCM_PACRF_PACR42(x) (((x) & 0x0F) << 20) +#define SCM_PACRF_PACR43(x) (((x) & 0x0F) << 16) +#define SCM_PACRF_PACR44(x) (((x) & 0x0F) << 12) +#define SCM_PACRF_PACR45(x) (((x) & 0x0F) << 8) +#define SCM_PACRF_PACR46(x) (((x) & 0x0F) << 4) +#define SCM_PACRF_PACR47(x) ((x) & 0x0F) + +#define SCM_PACRG_PACR48(x) (((x) & 0x0F) << 28) +#define SCM_PACRG_PACR49(x) (((x) & 0x0F) << 24) +#define SCM_PACRG_PACR50(x) (((x) & 0x0F) << 20) +#define SCM_PACRG_PACR51(x) (((x) & 0x0F) << 16) + +#define PACR_SP 4 +#define PACR_WP 2 +#define PACR_TP 1 + +#define SCM_CWCR_RO (0x8000) +#define SCM_CWCR_CWR_WH (0x0100) +#define SCM_CWCR_CWE (0x0080) +#define SCM_CWCR_CWRI_WINDOW (0x0060) +#define SCM_CWCR_CWRI_RESET (0x0040) +#define SCM_CWCR_CWRI_INT_RESET (0x0020) +#define SCM_CWCR_CWRI_INT (0x0000) +#define SCM_CWCR_CWT(x) (((x) & 0x001F)) + +#define SCM_ISR_CFEI (0x02) +#define SCM_ISR_CWIC (0x01) + +#define BCR_GBR (0x00000200) +#define BCR_GBW (0x00000100) +#define BCR_S7 (0x00000080) +#define BCR_S6 (0x00000040) +#define BCR_S4 (0x00000010) +#define BCR_S1 (0x00000002) + +#define SCM_CFIER_ECFEI (0x01) + +#define SCM_CFLOC_LOC (0x80) + +#define SCM_CFATR_WRITE (0x80) +#define SCM_CFATR_SZ32 (0x20) +#define SCM_CFATR_SZ16 (0x10) +#define SCM_CFATR_SZ08 (0x00) +#define SCM_CFATR_CACHE (0x08) +#define SCM_CFATR_MODE (0x02) +#define SCM_CFATR_TYPE (0x01) + +/* *** Interrupt Controller (INTC) *** */ +#define INT0_LO_RSVD0 (0) +#define INT0_LO_EPORT1 (1) +#define INT0_LO_EPORT2 (2) +#define INT0_LO_EPORT3 (3) +#define INT0_LO_EPORT4 (4) +#define INT0_LO_EPORT5 (5) +#define INT0_LO_EPORT6 (6) +#define INT0_LO_EPORT7 (7) +#define INT0_LO_EDMA_00 (8) +#define INT0_LO_EDMA_01 (9) +#define INT0_LO_EDMA_02 (10) +#define INT0_LO_EDMA_03 (11) +#define INT0_LO_EDMA_04 (12) +#define INT0_LO_EDMA_05 (13) +#define INT0_LO_EDMA_06 (14) +#define INT0_LO_EDMA_07 (15) +#define INT0_LO_EDMA_08 (16) +#define INT0_LO_EDMA_09 (17) +#define INT0_LO_EDMA_10 (18) +#define INT0_LO_EDMA_11 (19) +#define INT0_LO_EDMA_12 (20) +#define INT0_LO_EDMA_13 (21) +#define INT0_LO_EDMA_14 (22) +#define INT0_LO_EDMA_15 (23) +#define INT0_LO_EDMA_ERR (24) +#define INT0_LO_SCM_CWIC (25) +#define INT0_LO_UART0 (26) +#define INT0_LO_UART1 (27) +#define INT0_LO_UART2 (28) +#define INT0_LO_RSVD1 (29) +#define INT0_LO_I2C (30) +#define INT0_LO_DSPI (31) +#define INT0_HI_DTMR0 (32) +#define INT0_HI_DTMR1 (33) +#define INT0_HI_DTMR2 (34) +#define INT0_HI_DTMR3 (35) +#define INT0_HI_FEC0_TXF (36) +#define INT0_HI_FEC0_TXB (37) +#define INT0_HI_FEC0_UN (38) +#define INT0_HI_FEC0_RL (39) +#define INT0_HI_FEC0_RXF (40) +#define INT0_HI_FEC0_RXB (41) +#define INT0_HI_FEC0_MII (42) +#define INT0_HI_FEC0_LC (43) +#define INT0_HI_FEC0_HBERR (44) +#define INT0_HI_FEC0_GRA (45) +#define INT0_HI_FEC0_EBERR (46) +#define INT0_HI_FEC0_BABT (47) +#define INT0_HI_FEC0_BABR (48) +#define INT0_HI_FEC1_TXF (49) +#define INT0_HI_FEC1_TXB (50) +#define INT0_HI_FEC1_UN (51) +#define INT0_HI_FEC1_RL (52) +#define INT0_HI_FEC1_RXF (53) +#define INT0_HI_FEC1_RXB (54) +#define INT0_HI_FEC1_MII (55) +#define INT0_HI_FEC1_LC (56) +#define INT0_HI_FEC1_HBERR (57) +#define INT0_HI_FEC1_GRA (58) +#define INT0_HI_FEC1_EBERR (59) +#define INT0_HI_FEC1_BABT (60) +#define INT0_HI_FEC1_BABR (61) +#define INT0_HI_SCM_CFEI (62) + +/* 0 - 24 reserved */ +#define INT1_LO_EPORT1_FLAG0 (25) +#define INT1_LO_EPORT1_FLAG1 (26) +#define INT1_LO_EPORT1_FLAG2 (27) +#define INT1_LO_EPORT1_FLAG3 (28) +#define INT1_LO_EPORT1_FLAG4 (29) +#define INT1_LO_EPORT1_FLAG5 (30) +#define INT1_LO_EPORT1_FLAG6 (31) +#define INT1_LO_EPORT1_FLAG7 (32) +#define INT1_HI_DSPI_EOQF (33) +#define INT1_HI_DSPI_TFFF (34) +#define INT1_HI_DSPI_TCF (35) +#define INT1_HI_DSPI_TFUF (36) +#define INT1_HI_DSPI_RFDF (37) +#define INT1_HI_DSPI_RFOF (38) +#define INT1_HI_DSPI_RFOF_TFUF (39) +#define INT1_HI_RNG_EI (40) +#define INT1_HI_PLL_LOCF (41) +#define INT1_HI_PLL_LOLF (42) +#define INT1_HI_PIT0 (43) +#define INT1_HI_PIT1 (44) +#define INT1_HI_PIT2 (45) +#define INT1_HI_PIT3 (46) +#define INT1_HI_USBOTG_STS (47) +#define INT1_HI_USBHOST_STS (48) +#define INT1_HI_SSI (49) +/* 50 - 51 reserved */ +#define INT1_HI_RTC (52) +#define INT1_HI_CCM_USBSTAT (53) +#define INT1_HI_CODEC_OR (54) +#define INT1_HI_CODEC_RF_TE (55) +#define INT1_HI_CODEC_ROE (56) +#define INT1_HI_CODEC_TUE (57) +/* 58 reserved */ +#define INT1_HI_SIM1_DATA (59) +#define INT1_HI_SIM1_GENERAL (60) +/* 61 - 62 reserved */ +#define INT1_HI_SDHC (63) + +/* *** Reset Controller Module (RCM) *** */ +#define RCM_RCR_SOFTRST (0x80) +#define RCM_RCR_FRCRSTOUT (0x40) + +#define RCM_RSR_SOFT (0x20) +#define RCM_RSR_LOC (0x10) +#define RCM_RSR_POR (0x08) +#define RCM_RSR_EXT (0x04) +#define RCM_RSR_WDR_CORE (0x02) +#define RCM_RSR_LOL (0x01) + +/* *** Chip Configuration Module (CCM) *** */ +#define CCM_CCR_CSC (0x0020) +#define CCM_CCR_BOOTPS (0x0010) +#define CCM_CCR_LOAD (0x0008) +#define CCM_CCR_OSC_MODE (0x0004) +#define CCM_CCR_SDR_MODE (0x0002) +#define CCM_CCR_RESERVED (0x0001) + +#define CCM_RCON_SDR_32BIT_UNIFIED (0x0012) +#define CCM_RCON_DDR_8BIT_SPLIT (0x0010) +#define CCM_RCON_SDR_16BIT_UNIFIED (0x0002) +#define CCM_RCON_DDR_16BIT_SPLIT (0x0000) + +#define CCM_CIR_PIN(x) (((x) & 0x03FF) << 6) +#define CCM_CIR_PRN(x) ((x) & 0x003F) + +#define CCM_MISCCR_FECM (0x8000) +#define CCM_MISCCR_CDCSRC (0x4000) +#define CCM_MISCCR_PLL_LOCK (0x2000) +#define CCM_MISCCR_LIMP (0x1000) +#define CCM_MISCCR_BME (0x8000) +#define CCM_MISCCR_BMT_MASK (0xF8FF) +#define CCM_MISCCR_BMT(x) (((x) & 0x0007) << 8) +#define CCM_MISCCR_BMT_512 (0x0700) +#define CCM_MISCCR_BMT_1024 (0x0600) +#define CCM_MISCCR_BMT_2048 (0x0500) +#define CCM_MISCCR_BMT_4096 (0x0400) +#define CCM_MISCCR_BMT_8192 (0x0300) +#define CCM_MISCCR_BMT_16384 (0x0200) +#define CCM_MISCCR_BMT_32768 (0x0100) +#define CCM_MISCCR_BMT_65536 (0x0000) +#define CCM_MISCCR_TIM_DMA (0x0020) +#define CCM_MISCCR_SSI_SRC (0x0010) +#define CCM_MISCCR_USBH_OC (0x0008) +#define CCM_MISCCR_USBO_OC (0x0004) +#define CCM_MISCCR_USB_PUE (0x0002) +#define CCM_MISCCR_USB_SRC (0x0001) + +#define CCM_CDR_LPDIV(x) (((x) & 0x0F) << 8) +#define CCM_CDR_SSIDIV(x) ((x) & 0xFF) + +#define CCM_UOCSR_DPPD (0x2000) +#define CCM_UOCSR_DMPD (0x1000) +#define CCM_UOCSR_DRV_VBUS (0x0800) +#define CCM_UOCSR_CRG_VBUS (0x0400) +#define CCM_UOCSR_DCR_VBUS (0x0200) +#define CCM_UOCSR_DPPU (0x0100) +#define CCM_UOCSR_AVLD (0x0080) +#define CCM_UOCSR_BVLD (0x0040) +#define CCM_UOCSR_VVLD (0x0020) +#define CCM_UOCSR_SEND (0x0010) +#define CCM_UOCSR_PWRFLT (0x0008) +#define CCM_UOCSR_WKUP (0x0004) +#define CCM_UOCSR_UOMIE (0x0002) +#define CCM_UOCSR_XPDE (0x0001) + +#define CCM_UHCSR_PORTIND(x) (((x) & 0x0003) << 14) +#define CCM_UHCSR_DRV_VBUS (0x0010) +#define CCM_UHCSR_PWRFLT (0x0008) +#define CCM_UHCSR_WKUP (0x0004) +#define CCM_UHCSR_UHMIE (0x0002) +#define CCM_UHCSR_XPDE (0x0001) + +#define CCM_CODCR_BGREN (0x8000) +#define CCM_CODCR_REGEN (0x0080) + +#define CCM_MISC2_IGNLL (0x0008) +#define CCM_MISC2_DPS (0x0001) + +/* *** General Purpose I/O (GPIO) *** */ +#define GPIO_PDR_FBCTL ((x) & 0x0F) +#define GPIO_PDR_BE ((x) & 0x0F) +#define GPIO_PDR_CS32 (((x) & 0x03) << 4) +#define GPIO_PDR_CS10 (((x) & 0x03) << 4) +#define GPIO_PDR_DSPI ((x) & 0x7F) +#define GPIO_PDR_FEC0 ((x) & 0x7F) +#define GPIO_PDR_FECI2C ((x) & 0x3F) +#define GPIO_PDR_SIMP1 ((x) & 0x1F) +#define GPIO_PDR_SIMP0 ((x) & 0x1F) +#define GPIO_PDR_TIMER ((x) & 0x0F) +#define GPIO_PDR_UART ((x) & 0x3F) +#define GPIO_PDR_DEBUG (0x01) +#define GPIO_PDR_SDHC ((x) & 0x3F) +#define GPIO_PDR_SSI ((x) & 0x1F) + +#define GPIO_PAR_FBCTL_OE (0x80) +#define GPIO_PAR_FBCTL_TA (0x40) +#define GPIO_PAR_FBCTL_RWB (0x20) +#define GPIO_PAR_FBCTL_TS (0x18) + +#define GPIO_PAR_BE3 (0x40) +#define GPIO_PAR_BE2 (0x10) +#define GPIO_PAR_BE1 (0x04) +#define GPIO_PAR_BE0 (0x01) + +#define GPIO_PAR_CS5 (0x40) +#define GPIO_PAR_CS4 (0x10) +#define GPIO_PAR_CS1_MASK (0xF3) +#define GPIO_PAR_CS1_CS1 (0x0C) +#define GPIO_PAR_CS1_SDCS1 (0x08) +#define GPIO_PAR_CS0_MASK (0xFC) +#define GPIO_PAR_CS0_CS0 (0x03) +#define GPIO_PAR_CS0_CS4 (0x02) + +#define GPIO_PAR_DSPIH_SIN_MASK (0x3F) +#define GPIO_PAR_DSPIH_SIN (0xC0) +#define GPIO_PAR_DSPIH_SIN_U2RXD (0x80) +#define GPIO_PAR_DSPIH_SOUT_MASK (0xCF) +#define GPIO_PAR_DSPIH_SOUT (0x30) +#define GPIO_PAR_DSPIH_SOUT_U2TXD (0x20) +#define GPIO_PAR_DSPIH_SCK_MASK (0xF3) +#define GPIO_PAR_DSPIH_SCK (0x0C) +#define GPIO_PAR_DSPIH_SCK_U2CTS (0x08) +#define GPIO_PAR_DSPIH_PCS0_MASK (0xFC) +#define GPIO_PAR_DSPIH_PCS0 (0x03) +#define GPIO_PAR_DSPIH_PCS0_U2RTS (0x02) + +#define GPIO_PAR_DSPIL_PCS1_MASK (0x3F) +#define GPIO_PAR_DSPIL_PCS1 (0xC0) +#define GPIO_PAR_DSPIL_PCS2_MASK (0xCF) +#define GPIO_PAR_DSPIL_PCS2 (0x30) +#define GPIO_PAR_DSPIL_PCS2_USBH_OC (0x20) +#define GPIO_PAR_DSPIL_PCS3_MASK (0xF3) +#define GPIO_PAR_DSPIL_PCS3 (0x0C) +#define GPIO_PAR_DSPIL_PCS3_USBH_EN (0x08) + +#define GPIO_PAR_FEC1_7W_FEC (0x40) +#define GPIO_PAR_FEC1_RMII_FEC (0x10) +#define GPIO_PAR_FEC0_7W_FEC (0x04) +#define GPIO_PAR_FEC0_RMII_FEC (0x01) + +/* GPIO_PAR_FECI2C */ +#define GPIO_PAR_FECI2C_RMII0_MASK (0x3F) +#define GPIO_PAR_FECI2C_MDC0 (0x80) +#define GPIO_PAR_FECI2C_MDIO0 (0x40) +#define GPIO_PAR_FECI2C_RMII1_MASK (0xCF) +#define GPIO_PAR_FECI2C_MDC1 (0x20) +#define GPIO_PAR_FECI2C_MDIO1 (0x10) +#define GPIO_PAR_FECI2C_SDA_MASK (0xF3) +#define GPIO_PAR_FECI2C_SDA(x) (((x) & 0x03) << 2) +#define GPIO_PAR_FECI2C_SDA_SDA (0x0C) +#define GPIO_PAR_FECI2C_SDA_U2TXD (0x08) +#define GPIO_PAR_FECI2C_SDA_MDIO1 (0x04) +#define GPIO_PAR_FECI2C_SCL_MASK (0xFC) +#define GPIO_PAR_FECI2C_SCL(x) ((x) & 0x03) +#define GPIO_PAR_FECI2C_SCL_SCL (0x03) +#define GPIO_PAR_FECI2C_SCL_U2RXD (0x02) +#define GPIO_PAR_FECI2C_SCL_MDC1 (0x01) + +#define GPIO_PAR_IRQ0H_IRQ07_MASK (0x3F) +#define GPIO_PAR_IRQ0H_IRQ06_MASK (0xCF) +#define GPIO_PAR_IRQ0H_IRQ06_USBCLKIN (0x10) +#define GPIO_PAR_IRQ0H_IRQ04_MASK (0xFC) +#define GPIO_PAR_IRQ0H_IRQ04_DREQ0 (0x02) + +#define GPIO_PAR_IRQ0L_IRQ01_MASK (0xF3) +#define GPIO_PAR_IRQ0L_IRQ01_DREQ1 (0x08) + +#define GPIO_PAR_IRQ1H_IRQ17_DDATA3 (0x40) +#define GPIO_PAR_IRQ1H_IRQ16_DDATA2 (0x10) +#define GPIO_PAR_IRQ1H_IRQ15_DDATA1 (0x04) +#define GPIO_PAR_IRQ1H_IRQ14_DDATA0 (0x01) + +#define GPIO_PAR_IRQ1L_IRQ13_PST3 (0x40) +#define GPIO_PAR_IRQ1L_IRQ12_PST2 (0x10) +#define GPIO_PAR_IRQ1L_IRQ11_PST1 (0x04) +#define GPIO_PAR_IRQ1L_IRQ10_PST0 (0x01) + +#define GPIO_PAR_SIMP1H_DATA1_MASK (0x3F) +#define GPIO_PAR_SIMP1H_DATA1_SIMDATA1 (0xC0) +#define GPIO_PAR_SIMP1H_DATA1_SSITXD (0x80) +#define GPIO_PAR_SIMP1H_DATA1_U1TXD (0x40) +#define GPIO_PAR_SIMP1H_VEN1_MASK (0xCF) +#define GPIO_PAR_SIMP1H_VEN1_SIMVEN1 (0x30) +#define GPIO_PAR_SIMP1H_VEN1_SSIRXD (0x20) +#define GPIO_PAR_SIMP1H_VEN1_U1RXD (0x10) +#define GPIO_PAR_SIMP1H_RST1_MASK (0xF3) +#define GPIO_PAR_SIMP1H_RST1_SIMRST1 (0x0C) +#define GPIO_PAR_SIMP1H_RST1_SSIFS (0x08) +#define GPIO_PAR_SIMP1H_RST1_U1RTS (0x04) +#define GPIO_PAR_SIMP1H_PD1_MASK (0xFC) +#define GPIO_PAR_SIMP1H_PD1_SIMPD1 (0x03) +#define GPIO_PAR_SIMP1H_PD1_SSIBCLK (0x02) +#define GPIO_PAR_SIMP1H_PD1_U1CTS (0x01) + +#define GPIO_PAR_SIMP1L_CLK_MASK (0x3F) +#define GPIO_PAR_SIMP1L_CLK_CLK1 (0xC0) +#define GPIO_PAR_SIMP1L_CLK_SSIMCLK (0x80) + +#define GPIO_PAR_SIMP0_DATA0 (0x10) +#define GPIO_PAR_SIMP0_VEN0 (0x08) +#define GPIO_PAR_SIMP0_RST0 (0x04) +#define GPIO_PAR_SIMP0_PD0 (0x02) +#define GPIO_PAR_SIMP0_CLK0 (0x01) + +#define GPIO_PAR_TIN3(x) (((x) & 0x03) << 6) +#define GPIO_PAR_TIN2(x) (((x) & 0x03) << 4) +#define GPIO_PAR_TIN1(x) (((x) & 0x03) << 2) +#define GPIO_PAR_TIN0(x) ((x) & 0x03) +#define GPIO_PAR_TIN3_MASK (0x3F) +#define GPIO_PAR_TIN3_TIN3 (0xC0) +#define GPIO_PAR_TIN3_TOUT3 (0x80) +#define GPIO_PAR_TIN3_IRQ03 (0x40) +#define GPIO_PAR_TIN2_MASK (0xCF) +#define GPIO_PAR_TIN2_TIN2 (0x30) +#define GPIO_PAR_TIN2_TOUT2 (0x20) +#define GPIO_PAR_TIN2_IRQ02 (0x10) +#define GPIO_PAR_TIN1_MASK (0xF3) +#define GPIO_PAR_TIN1_TIN1 (0x0C) +#define GPIO_PAR_TIN1_TOUT1 (0x08) +#define GPIO_PAR_TIN1_DACK1 (0x04) +#define GPIO_PAR_TIN0_MASK (0xFC) +#define GPIO_PAR_TIN0_TIN0 (0x03) +#define GPIO_PAR_TIN0_TOUT0 (0x02) +#define GPIO_PAR_TIN0_CODEC_ALTCLK (0x01) + +#define GPIO_PAR_UART_U2TXD (0x80) +#define GPIO_PAR_UART_U2RXD (0x40) +#define GPIO_PAR_UART_U0TXD (0x20) +#define GPIO_PAR_UART_U0RXD (0x10) +#define GPIO_PAR_UART_RTS0(x) (((x) & 0x03) << 2) +#define GPIO_PAR_UART_CTS0(x) ((x) & 0x03) +#define GPIO_PAR_UART_RTS0_MASK (0xF3) +#define GPIO_PAR_UART_RTS0_U0RTS (0x0C) +#define GPIO_PAR_UART_RTS0_USBO_VBOC (0x08) +#define GPIO_PAR_UART_CTS0_MASK (0xFC) +#define GPIO_PAR_UART_CTS0_U0CTS (0x03) +#define GPIO_PAR_UART_CTS0_USB0_VBEN (0x02) +#define GPIO_PAR_UART_CTS0_USB_PULLUP (0x01) + +#define GPIO_PAR_DEBUG_ALLPST (0x80) + +#define GPIO_PAR_SDHC_DATA3 (0x20) +#define GPIO_PAR_SDHC_DATA2 (0x10) +#define GPIO_PAR_SDHC_DATA1 (0x08) +#define GPIO_PAR_SDHC_DATA0 (0x04) +#define GPIO_PAR_SDHC_CMD (0x02) +#define GPIO_PAR_SDHC_CLK (0x01) + +#define GPIO_PAR_SSIH_RXD(x) (((x) & 0x03) << 6) +#define GPIO_PAR_SSIH_TXD(x) (((x) & 0x03) << 4) +#define GPIO_PAR_SSIH_FS(x) (((x) & 0x03) << 2) +#define GPIO_PAR_SSIH_MCLK(x) ((x) & 0x03) +#define GPIO_PAR_SSIH_RXD_MASK (0x3F) +#define GPIO_PAR_SSIH_RXD_SSIRXD (0xC0) +#define GPIO_PAR_SSIH_RXD_U1RXD (0x40) +#define GPIO_PAR_SSIH_TXD_MASK (0xCF) +#define GPIO_PAR_SSIH_TXD_SSIRXD (0x30) +#define GPIO_PAR_SSIH_TXD_U1TXD (0x10) +#define GPIO_PAR_SSIH_FS_MASK (0xF3) +#define GPIO_PAR_SSIH_FS_SSIFS (0x0C) +#define GPIO_PAR_SSIH_FS_U1RTS (0x04) +#define GPIO_PAR_SSIH_MCLK_MASK (0xFC) +#define GPIO_PAR_SSIH_MCLK_SSIMCLK (0x03) +#define GPIO_PAR_SSIH_MCLK_SSICLKIN (0x01) + +#define GPIO_PAR_SSIL_MASK (0x3F) +#define GPIO_PAR_SSIL_BCLK (0xC0) +#define GPIO_PAR_SSIL_U1CTS (0x40) + +#define GPIO_MSCR_MSCR1(x) (((x) & 0x07) << 5) +#define GPIO_MSCR_MSCR2(x) (((x) & 0x07) << 5) +#define GPIO_MSCR_MSCR3(x) (((x) & 0x07) << 5) +#define GPIO_MSCR_MSCR4(x) (((x) & 0x07) << 5) +#define GPIO_MSCR_MSCRn_MASK (0x1F) +#define GPIO_MSCR_MSCRn_SDR (0xE0) +#define GPIO_MSCR_MSCRn_25VDDR (0x60) +#define GPIO_MSCR_MSCRn_18VDDR_FULL (0x20) +#define GPIO_MSCR_MSCRn_18VDDR_HALF (0x00) + +#define GPIO_MSCR_MSCR5(x) (((x) & 0x07) << 2) +#define GPIO_MSCR_MSCR5_MASK (0xE3) +#define GPIO_MSCR_MSCR5_SDR (0x1C) +#define GPIO_MSCR_MSCR5_25VDDR (0x0C) +#define GPIO_MSCR_MSCR5_18VDDR_FULL (0x04) +#define GPIO_MSCR_MSCR5_18VDDR_HALF (0x00) + +#define GPIO_SRCR_DSPI_MASK (0xFC) +#define GPIO_SRCR_DSPI(x) ((x) & 0x03) +#define GPIO_SRCR_I2C_MASK (0xFC) +#define GPIO_SRCR_I2C(x) ((x) & 0x03) +#define GPIO_SRCR_IRQ_IRQ0_MASK (0xF3) +#define GPIO_SRCR_IRQ_IRQ0(x) (((x) & 0x03) << 2) +#define GPIO_SRCR_IRQ_IRQ1DBG_MASK (0xFC) +#define GPIO_SRCR_IRQ_IRQ1DBG(x) ((x) & 0x03) +#define GPIO_SRCR_SIM_SIMP0_MASK (0xF3) +#define GPIO_SRCR_SIM_SIMP0(x) (((x) & 0x03) << 2) +#define GPIO_SRCR_SIM_SIMP1_MASK (0xFC) +#define GPIO_SRCR_SIM_SIMP1(x) ((x) & 0x03) +#define GPIO_SRCR_TIMER_MASK (0xFC) +#define GPIO_SRCR_TIMER(x) ((x) & 0x03) +#define GPIO_SRCR_UART2_MASK (0xF3) +#define GPIO_SRCR_UART2(x) (((x) & 0x03) << 2) +#define GPIO_SRCR_UART0_MASK (0xFC) +#define GPIO_SRCR_UART0(x) ((x) & 0x03) +#define GPIO_SRCR_SDHC_MASK (0xFC) +#define GPIO_SRCR_SDHC(x) ((x) & 0x03) +#define GPIO_SRCR_SSI_MASK (0xFC) +#define GPIO_SRCR_SSI(x) ((x) & 0x03) + +#define SRCR_HIGHEST (0x03) +#define SRCR_HIGH (0x02) +#define SRCR_LOW (0x01) +#define SRCR_LOWEST (0x00) + +#define GPIO_DSCR_FEC_RMIICLK_MASK (0xCF) +#define GPIO_DSCR_FEC_RMIICLK(x) (((x) & 0x03) << 4) +#define GPIO_DSCR_FEC_RMII0_MASK (0xF3) +#define GPIO_DSCR_FEC_RMII0(x) (((x) & 0x03) << 2) +#define GPIO_DSCR_FEC_RMII1_MASK (0xFC) +#define GPIO_DSCR_FEC_RMII1(x) ((x) & 0x03) + +#define DSCR_50PF (0x03) +#define DSCR_30PF (0x02) +#define DSCR_20PF (0x01) +#define DSCR_10PF (0x00) + +#define GPIO_PCRH_DSPI_PCS0_PULLUP_EN (0x80) +#define GPIO_PCRH_SIM_VEN1_PULLUP_EN (0x40) +#define GPIO_PCRH_SIM_VEN1_PULLUP (0x20) +#define GPIO_PCRH_SIM_DATA1_PULLUP_EN (0x10) +#define GPIO_PCRH_SIM_DATA1_PULLUP (0x08) +#define GPIO_PCRH_SSI_PULLUP_EN (0x02) +#define GPIO_PCRH_SSI_PULLUP (0x01) + +#define GPIO_PCRL_SDHC_DATA3_PULLUP_EN (0x80) +#define GPIO_PCRL_SDHC_DATA3_PULLUP (0x40) +#define GPIO_PCRL_SDHC_DATA2_PULLUP_EN (0x20) +#define GPIO_PCRL_SDHC_DATA1_PULLUP_EN (0x10) +#define GPIO_PCRL_SDHC_DATA0_PULLUP_EN (0x08) +#define GPIO_PCRL_SDHC_CMD_PULLUP_EN (0x04) + +/* *** Phase Locked Loop (PLL) *** */ +#define PLL_PCR_LOC_IRQ (0x00040000) +#define PLL_PCR_LOC_RE (0x00020000) +#define PLL_PCR_LOC_EN (0x00010000) +#define PLL_PCR_LOL_IRQ (0x00004000) +#define PLL_PCR_LOL_RE (0x00002000) +#define PLL_PCR_LOL_EN (0x00001000) +#define PLL_PCR_REFDIV_MASK (0xFFFFF8FF) +#define PLL_PCR_REFDIV(x) (((x) & 0x07) << 8) +#define PLL_PCR_FBDIV_MASK (0xFFFFFFC0) +#define PLL_PCR_FBDIV(x) ((x) & 0x3F) + +#define PLL_PDR_OUTDIV4_MASK (0x0FFF) +#define PLL_PDR_OUTDIV4(x) (((x) & 0x0000000F) << 12) +#define PLL_PDR_OUTDIV3_MASK (0xF0FF) +#define PLL_PDR_OUTDIV3(x) (((x) & 0x0000000F) << 8) +#define PLL_PDR_OUTDIV2_MASK (0xFF0F) +#define PLL_PDR_OUTDIV2(x) (((x) & 0x0000000F) << 4) +#define PLL_PDR_OUTDIV1_MASK (0xFFF0) +#define PLL_PDR_OUTDIV1(x) ((x) & 0x0000000F) +#define PLL_PDR_USB(x) PLL_PDR_OUTDIV4(x) +#define PLL_PDR_SDRAM(x) PLL_PDR_OUTDIV3(x) +#define PLL_PDR_FB(x) PLL_PDR_OUTDIV2(x) +#define PLL_PDR_CPU(x) PLL_PDR_OUTDIV1(x) + +#define PLL_PSR_LOCF (0x00000200) +#define PLL_PSR_LOC (0x00000100) +#define PLL_PSR_LOLF (0x00000040) +#define PLL_PSR_LOCKS (0x00000020) +#define PLL_PSR_LOCK (0x00000010) +#define PLL_PSR_MODE(x) ((x) & 0x07) + +/* *** Real Time Clock *** */ +#define RTC_OCEN_OSCBYP (0x00000010) +#define RTC_OCEN_CLKEN (0x00000008) + +#endif /* m5301x_h */ diff --git a/include/asm-m68k/m5329.h b/include/asm-m68k/m5329.h index c1669dcb10..c7ebed1375 100644 --- a/include/asm-m68k/m5329.h +++ b/include/asm-m68k/m5329.h @@ -187,65 +187,6 @@ #define CFATR_TYPE (0x01) /********************************************************************* -* FlexBus Chip Selects (FBCS) -*********************************************************************/ -/* Bit definitions and macros for FBCS_CSAR */ -#define CSAR_BA(x) (((x)&0xFFFF)<<16) - -/* Bit definitions and macros for FBCS_CSMR */ -#define CSMR_BAM(x) (((x)&0xFFFF)<<16) -#define CSMR_BAM_4G (0xFFFF0000) -#define CSMR_BAM_2G (0x7FFF0000) -#define CSMR_BAM_1G (0x3FFF0000) -#define CSMR_BAM_1024M (0x3FFF0000) -#define CSMR_BAM_512M (0x1FFF0000) -#define CSMR_BAM_256M (0x0FFF0000) -#define CSMR_BAM_128M (0x07FF0000) -#define CSMR_BAM_64M (0x03FF0000) -#define CSMR_BAM_32M (0x01FF0000) -#define CSMR_BAM_16M (0x00FF0000) -#define CSMR_BAM_8M (0x007F0000) -#define CSMR_BAM_4M (0x003F0000) -#define CSMR_BAM_2M (0x001F0000) -#define CSMR_BAM_1M (0x000F0000) -#define CSMR_BAM_1024K (0x000F0000) -#define CSMR_BAM_512K (0x00070000) -#define CSMR_BAM_256K (0x00030000) -#define CSMR_BAM_128K (0x00010000) -#define CSMR_BAM_64K (0x00000000) -#define CSMR_WP (0x00000100) -#define CSMR_V (0x00000001) - -/* Bit definitions and macros for FBCS_CSCR */ -#define CSCR_SWS(x) (((x)&0x3F)<<26) -#define CSCR_ASET(x) (((x)&0x03)<<20) -#define CSCR_SWSEN (0x00800000) -#define CSCR_ASET_4CLK (0x00300000) -#define CSCR_ASET_3CLK (0x00200000) -#define CSCR_ASET_2CLK (0x00100000) -#define CSCR_ASET_1CLK (0x00000000) -#define CSCR_RDAH(x) (((x)&0x03)<<18) -#define CSCR_RDAH_4CYC (0x000C0000) -#define CSCR_RDAH_3CYC (0x00080000) -#define CSCR_RDAH_2CYC (0x00040000) -#define CSCR_RDAH_1CYC (0x00000000) -#define CSCR_WRAH(x) (((x)&0x03)<<16) -#define CSCR_WDAH_4CYC (0x00003000) -#define CSCR_WDAH_3CYC (0x00002000) -#define CSCR_WDAH_2CYC (0x00001000) -#define CSCR_WDAH_1CYC (0x00000000) -#define CSCR_WS(x) (((x)&0x3F)<<10) -#define CSCR_SBM (0x00000200) -#define CSCR_AA (0x00000100) -#define CSCR_PS_MASK (0x000000C0) -#define CSCR_PS_32 (0x00000000) -#define CSCR_PS_16 (0x00000080) -#define CSCR_PS_8 (0x00000040) -#define CSCR_BEM (0x00000020) -#define CSCR_BSTR (0x00000010) -#define CSCR_BSTW (0x00000008) - -/********************************************************************* * Reset Controller Module (RCM) *********************************************************************/ @@ -261,100 +202,6 @@ #define RCM_RSR_SOFT (0x20) /********************************************************************* -* FlexCAN Module (CAN) -*********************************************************************/ -/* Bit definitions and macros for CAN_CANMCR */ -#define CANMCR_MDIS (0x80000000) -#define CANMCR_FRZ (0x40000000) -#define CANMCR_HALT (0x10000000) -#define CANMCR_NORDY (0x08000000) -#define CANMCR_SOFTRST (0x02000000) -#define CANMCR_FRZACK (0x01000000) -#define CANMCR_SUPV (0x00800000) -#define CANMCR_LPMACK (0x00100000) -#define CANMCR_MAXMB(x) (((x)&0x0F)) - -/* Bit definitions and macros for CAN_CANCTRL */ -#define CANCTRL_PRESDIV(x) (((x)&0xFF)<<24) -#define CANCTRL_RJW(x) (((x)&0x03)<<22) -#define CANCTRL_PSEG1(x) (((x)&0x07)<<19) -#define CANCTRL_PSEG2(x) (((x)&0x07)<<16) -#define CANCTRL_BOFFMSK (0x00008000) -#define CANCTRL_ERRMSK (0x00004000) -#define CANCTRL_CLKSRC (0x00002000) -#define CANCTRL_LPB (0x00001000) -#define CANCTRL_SMP (0x00000080) -#define CANCTRL_BOFFREC (0x00000040) -#define CANCTRL_TSYNC (0x00000020) -#define CANCTRL_LBUF (0x00000010) -#define CANCTRL_LOM (0x00000008) -#define CANCTRL_PROPSEG(x) (((x)&0x07)) - -/* Bit definitions and macros for CAN_TIMER */ -#define TIMER_TIMER(x) ((x)&0xFFFF) - -/* Bit definitions and macros for CAN_RXGMASK */ -#define RXGMASK_MI(x) ((x)&0x1FFFFFFF) - -/* Bit definitions and macros for CAN_ERRCNT */ -#define ERRCNT_TXECTR(x) (((x)&0xFF)) -#define ERRCNT_RXECTR(x) (((x)&0xFF)<<8) - -/* Bit definitions and macros for CAN_ERRSTAT */ -#define ERRSTAT_BITERR1 (0x00008000) -#define ERRSTAT_BITERR0 (0x00004000) -#define ERRSTAT_ACKERR (0x00002000) -#define ERRSTAT_CRCERR (0x00001000) -#define ERRSTAT_FRMERR (0x00000800) -#define ERRSTAT_STFERR (0x00000400) -#define ERRSTAT_TXWRN (0x00000200) -#define ERRSTAT_RXWRN (0x00000100) -#define ERRSTAT_IDLE (0x00000080) -#define ERRSTAT_TXRX (0x00000040) -#define ERRSTAT_FLT_BUSOFF (0x00000020) -#define ERRSTAT_FLT_PASSIVE (0x00000010) -#define ERRSTAT_FLT_ACTIVE (0x00000000) -#define ERRSTAT_BOFFINT (0x00000004) -#define ERRSTAT_ERRINT (0x00000002) -#define ERRSTAT_WAKINT (0x00000001) - -/* Bit definitions and macros for CAN_IMASK */ -#define IMASK_BUF15M (0x00008000) -#define IMASK_BUF14M (0x00004000) -#define IMASK_BUF13M (0x00002000) -#define IMASK_BUF12M (0x00001000) -#define IMASK_BUF11M (0x00000800) -#define IMASK_BUF10M (0x00000400) -#define IMASK_BUF9M (0x00000200) -#define IMASK_BUF8M (0x00000100) -#define IMASK_BUF7M (0x00000080) -#define IMASK_BUF6M (0x00000040) -#define IMASK_BUF5M (0x00000020) -#define IMASK_BUF4M (0x00000010) -#define IMASK_BUF3M (0x00000008) -#define IMASK_BUF2M (0x00000004) -#define IMASK_BUF1M (0x00000002) -#define IMASK_BUF0M (0x00000001) - -/* Bit definitions and macros for CAN_IFLAG */ -#define IFLAG_BUF15I (0x00008000) -#define IFLAG_BUF14I (0x00004000) -#define IFLAG_BUF13I (0x00002000) -#define IFLAG_BUF12I (0x00001000) -#define IFLAG_BUF11I (0x00000800) -#define IFLAG_BUF10I (0x00000400) -#define IFLAG_BUF9I (0x00000200) -#define IFLAG_BUF8I (0x00000100) -#define IFLAG_BUF7I (0x00000080) -#define IFLAG_BUF6I (0x00000040) -#define IFLAG_BUF5I (0x00000020) -#define IFLAG_BUF4I (0x00000010) -#define IFLAG_BUF3I (0x00000008) -#define IFLAG_BUF2I (0x00000004) -#define IFLAG_BUF1I (0x00000002) -#define IFLAG_BUF0I (0x00000001) - -/********************************************************************* * Interrupt Controller (INTC) *********************************************************************/ #define INTC0_EPORT INTC_IPRL_INT1 @@ -411,200 +258,6 @@ /* 49 - 61 Reserved */ #define INT0_HI_SCM (62) -/* Bit definitions and macros for INTC_IPRH */ -#define INTC_IPRH_INT63 (0x80000000) -#define INTC_IPRH_INT62 (0x40000000) -#define INTC_IPRH_INT61 (0x20000000) -#define INTC_IPRH_INT60 (0x10000000) -#define INTC_IPRH_INT59 (0x08000000) -#define INTC_IPRH_INT58 (0x04000000) -#define INTC_IPRH_INT57 (0x02000000) -#define INTC_IPRH_INT56 (0x01000000) -#define INTC_IPRH_INT55 (0x00800000) -#define INTC_IPRH_INT54 (0x00400000) -#define INTC_IPRH_INT53 (0x00200000) -#define INTC_IPRH_INT52 (0x00100000) -#define INTC_IPRH_INT51 (0x00080000) -#define INTC_IPRH_INT50 (0x00040000) -#define INTC_IPRH_INT49 (0x00020000) -#define INTC_IPRH_INT48 (0x00010000) -#define INTC_IPRH_INT47 (0x00008000) -#define INTC_IPRH_INT46 (0x00004000) -#define INTC_IPRH_INT45 (0x00002000) -#define INTC_IPRH_INT44 (0x00001000) -#define INTC_IPRH_INT43 (0x00000800) -#define INTC_IPRH_INT42 (0x00000400) -#define INTC_IPRH_INT41 (0x00000200) -#define INTC_IPRH_INT40 (0x00000100) -#define INTC_IPRH_INT39 (0x00000080) -#define INTC_IPRH_INT38 (0x00000040) -#define INTC_IPRH_INT37 (0x00000020) -#define INTC_IPRH_INT36 (0x00000010) -#define INTC_IPRH_INT35 (0x00000008) -#define INTC_IPRH_INT34 (0x00000004) -#define INTC_IPRH_INT33 (0x00000002) -#define INTC_IPRH_INT32 (0x00000001) - -/* Bit definitions and macros for INTC_IPRL */ -#define INTC_IPRL_INT31 (0x80000000) -#define INTC_IPRL_INT30 (0x40000000) -#define INTC_IPRL_INT29 (0x20000000) -#define INTC_IPRL_INT28 (0x10000000) -#define INTC_IPRL_INT27 (0x08000000) -#define INTC_IPRL_INT26 (0x04000000) -#define INTC_IPRL_INT25 (0x02000000) -#define INTC_IPRL_INT24 (0x01000000) -#define INTC_IPRL_INT23 (0x00800000) -#define INTC_IPRL_INT22 (0x00400000) -#define INTC_IPRL_INT21 (0x00200000) -#define INTC_IPRL_INT20 (0x00100000) -#define INTC_IPRL_INT19 (0x00080000) -#define INTC_IPRL_INT18 (0x00040000) -#define INTC_IPRL_INT17 (0x00020000) -#define INTC_IPRL_INT16 (0x00010000) -#define INTC_IPRL_INT15 (0x00008000) -#define INTC_IPRL_INT14 (0x00004000) -#define INTC_IPRL_INT13 (0x00002000) -#define INTC_IPRL_INT12 (0x00001000) -#define INTC_IPRL_INT11 (0x00000800) -#define INTC_IPRL_INT10 (0x00000400) -#define INTC_IPRL_INT9 (0x00000200) -#define INTC_IPRL_INT8 (0x00000100) -#define INTC_IPRL_INT7 (0x00000080) -#define INTC_IPRL_INT6 (0x00000040) -#define INTC_IPRL_INT5 (0x00000020) -#define INTC_IPRL_INT4 (0x00000010) -#define INTC_IPRL_INT3 (0x00000008) -#define INTC_IPRL_INT2 (0x00000004) -#define INTC_IPRL_INT1 (0x00000002) -#define INTC_IPRL_INT0 (0x00000001) - -/* Bit definitions and macros for INTC_ICONFIG */ -#define INTC_ICFG_ELVLPRI7 (0x8000) -#define INTC_ICFG_ELVLPRI6 (0x4000) -#define INTC_ICFG_ELVLPRI5 (0x2000) -#define INTC_ICFG_ELVLPRI4 (0x1000) -#define INTC_ICFG_ELVLPRI3 (0x0800) -#define INTC_ICFG_ELVLPRI2 (0x0400) -#define INTC_ICFG_ELVLPRI1 (0x0200) -#define INTC_ICFG_EMASK (0x0020) - -/* Bit definitions and macros for INTC_SIMR */ -#define INTC_SIMR_SALL (0x40) -#define INTC_SIMR_SIMR(x) ((x)&0x3F) - -/* Bit definitions and macros for INTC_CIMR */ -#define INTC_CIMR_CALL (0x40) -#define INTC_CIMR_CIMR(x) ((x)&0x3F) - -/* Bit definitions and macros for INTC_CLMASK */ -#define INTC_CLMASK_CLMASK(x) ((x)&0x0F) - -/* Bit definitions and macros for INTC_SLMASK */ -#define INTC_SLMASK_SLMASK(x) ((x)&0x0F) - -/* Bit definitions and macros for INTC_ICR */ -#define INTC_ICR_IL(x) ((x)&0x07) - -/********************************************************************* -* Queued Serial Peripheral Interface (QSPI) -*********************************************************************/ -/* Bit definitions and macros for QSPI_QMR */ -#define QSPI_QMR_MSTR (0x8000) -#define QSPI_QMR_DOHIE (0x4000) -#define QSPI_QMR_BITS(x) (((x)&0x000F)<<10) -#define QSPI_QMR_CPOL (0x0200) -#define QSPI_QMR_CPHA (0x0100) -#define QSPI_QMR_BAUD(x) ((x)&0x00FF) - -/* Bit definitions and macros for QSPI_QDLYR */ -#define QSPI_QDLYR_SPE (0x8000) -#define QSPI_QDLYR_QCD(x) (((x)&0x007F)<<8) -#define QSPI_QDLYR_DTL(x) ((x)&0x00FF) - -/* Bit definitions and macros for QSPI_QWR */ -#define QSPI_QWR_NEWQP(x) ((x)&0x000F) -#define QSPI_QWR_ENDQP(x) (((x)&0x000F)<<8) -#define QSPI_QWR_CSIV (0x1000) -#define QSPI_QWR_WRTO (0x2000) -#define QSPI_QWR_WREN (0x4000) -#define QSPI_QWR_HALT (0x8000) - -/* Bit definitions and macros for QSPI_QIR */ -#define QSPI_QIR_WCEFB (0x8000) -#define QSPI_QIR_ABRTB (0x4000) -#define QSPI_QIR_ABRTL (0x1000) -#define QSPI_QIR_WCEFE (0x0800) -#define QSPI_QIR_ABRTE (0x0400) -#define QSPI_QIR_SPIFE (0x0100) -#define QSPI_QIR_WCEF (0x0008) -#define QSPI_QIR_ABRT (0x0004) -#define QSPI_QIR_SPIF (0x0001) - -/* Bit definitions and macros for QSPI_QAR */ -#define QSPI_QAR_ADDR(x) ((x)&0x003F) -#define QSPI_QAR_TRANS (0x0000) -#define QSPI_QAR_RECV (0x0010) -#define QSPI_QAR_CMD (0x0020) - -/* Bit definitions and macros for QSPI_QDR */ -#define QSPI_QDR_CONT (0x8000) -#define QSPI_QDR_BITSE (0x4000) -#define QSPI_QDR_DT (0x2000) -#define QSPI_QDR_DSCK (0x1000) -#define QSPI_QDR_QSPI_CS3 (0x0800) -#define QSPI_QDR_QSPI_CS2 (0x0400) -#define QSPI_QDR_QSPI_CS1 (0x0200) -#define QSPI_QDR_QSPI_CS0 (0x0100) - -/********************************************************************* -* Pulse Width Modulation (PWM) -*********************************************************************/ -/* Bit definitions and macros for PWM_E */ -#define PWM_EN_PWME7 (0x80) -#define PWM_EN_PWME5 (0x20) -#define PWM_EN_PWME3 (0x08) -#define PWM_EN_PWME1 (0x02) - -/* Bit definitions and macros for PWM_POL */ -#define PWM_POL_PPOL7 (0x80) -#define PWM_POL_PPOL5 (0x20) -#define PWM_POL_PPOL3 (0x08) -#define PWM_POL_PPOL1 (0x02) - -/* Bit definitions and macros for PWM_CLK */ -#define PWM_CLK_PCLK7 (0x80) -#define PWM_CLK_PCLK5 (0x20) -#define PWM_CLK_PCLK3 (0x08) -#define PWM_CLK_PCLK1 (0x02) - -/* Bit definitions and macros for PWM_PRCLK */ -#define PWM_PRCLK_PCKB(x) (((x)&0x07)<<4) -#define PWM_PRCLK_PCKA(x) ((x)&0x07) - -/* Bit definitions and macros for PWM_CAE */ -#define PWM_CAE_CAE7 (0x80) -#define PWM_CAE_CAE5 (0x20) -#define PWM_CAE_CAE3 (0x08) -#define PWM_CAE_CAE1 (0x02) - -/* Bit definitions and macros for PWM_CTL */ -#define PWM_CTL_CON67 (0x80) -#define PWM_CTL_CON45 (0x40) -#define PWM_CTL_CON23 (0x20) -#define PWM_CTL_CON01 (0x10) -#define PWM_CTL_PSWAR (0x08) -#define PWM_CTL_PFRZ (0x04) - -/* Bit definitions and macros for PWM_SDN */ -#define PWM_SDN_IF (0x80) -#define PWM_SDN_IE (0x40) -#define PWM_SDN_RESTART (0x20) -#define PWM_SDN_LVL (0x10) -#define PWM_SDN_PWM7IN (0x04) -#define PWM_SDN_PWM7IL (0x02) -#define PWM_SDN_SDNEN (0x01) - /********************************************************************* * Watchdog Timer Modules (WTM) *********************************************************************/ diff --git a/include/asm-m68k/m5445x.h b/include/asm-m68k/m5445x.h index 7fcf4ef7d4..596662191c 100644 --- a/include/asm-m68k/m5445x.h +++ b/include/asm-m68k/m5445x.h @@ -114,325 +114,6 @@ #define INT1_HI_PCI_ASR (56) #define INT1_HI_PLL_LOCKS (57) -/* Bit definitions and macros for IPRH */ -#define INTC_IPRH_INT32 (0x00000001) -#define INTC_IPRH_INT33 (0x00000002) -#define INTC_IPRH_INT34 (0x00000004) -#define INTC_IPRH_INT35 (0x00000008) -#define INTC_IPRH_INT36 (0x00000010) -#define INTC_IPRH_INT37 (0x00000020) -#define INTC_IPRH_INT38 (0x00000040) -#define INTC_IPRH_INT39 (0x00000080) -#define INTC_IPRH_INT40 (0x00000100) -#define INTC_IPRH_INT41 (0x00000200) -#define INTC_IPRH_INT42 (0x00000400) -#define INTC_IPRH_INT43 (0x00000800) -#define INTC_IPRH_INT44 (0x00001000) -#define INTC_IPRH_INT45 (0x00002000) -#define INTC_IPRH_INT46 (0x00004000) -#define INTC_IPRH_INT47 (0x00008000) -#define INTC_IPRH_INT48 (0x00010000) -#define INTC_IPRH_INT49 (0x00020000) -#define INTC_IPRH_INT50 (0x00040000) -#define INTC_IPRH_INT51 (0x00080000) -#define INTC_IPRH_INT52 (0x00100000) -#define INTC_IPRH_INT53 (0x00200000) -#define INTC_IPRH_INT54 (0x00400000) -#define INTC_IPRH_INT55 (0x00800000) -#define INTC_IPRH_INT56 (0x01000000) -#define INTC_IPRH_INT57 (0x02000000) -#define INTC_IPRH_INT58 (0x04000000) -#define INTC_IPRH_INT59 (0x08000000) -#define INTC_IPRH_INT60 (0x10000000) -#define INTC_IPRH_INT61 (0x20000000) -#define INTC_IPRH_INT62 (0x40000000) -#define INTC_IPRH_INT63 (0x80000000) - -/* Bit definitions and macros for IPRL */ -#define INTC_IPRL_INT0 (0x00000001) -#define INTC_IPRL_INT1 (0x00000002) -#define INTC_IPRL_INT2 (0x00000004) -#define INTC_IPRL_INT3 (0x00000008) -#define INTC_IPRL_INT4 (0x00000010) -#define INTC_IPRL_INT5 (0x00000020) -#define INTC_IPRL_INT6 (0x00000040) -#define INTC_IPRL_INT7 (0x00000080) -#define INTC_IPRL_INT8 (0x00000100) -#define INTC_IPRL_INT9 (0x00000200) -#define INTC_IPRL_INT10 (0x00000400) -#define INTC_IPRL_INT11 (0x00000800) -#define INTC_IPRL_INT12 (0x00001000) -#define INTC_IPRL_INT13 (0x00002000) -#define INTC_IPRL_INT14 (0x00004000) -#define INTC_IPRL_INT15 (0x00008000) -#define INTC_IPRL_INT16 (0x00010000) -#define INTC_IPRL_INT17 (0x00020000) -#define INTC_IPRL_INT18 (0x00040000) -#define INTC_IPRL_INT19 (0x00080000) -#define INTC_IPRL_INT20 (0x00100000) -#define INTC_IPRL_INT21 (0x00200000) -#define INTC_IPRL_INT22 (0x00400000) -#define INTC_IPRL_INT23 (0x00800000) -#define INTC_IPRL_INT24 (0x01000000) -#define INTC_IPRL_INT25 (0x02000000) -#define INTC_IPRL_INT26 (0x04000000) -#define INTC_IPRL_INT27 (0x08000000) -#define INTC_IPRL_INT28 (0x10000000) -#define INTC_IPRL_INT29 (0x20000000) -#define INTC_IPRL_INT30 (0x40000000) -#define INTC_IPRL_INT31 (0x80000000) - -/* Bit definitions and macros for IMRH */ -#define INTC_IMRH_INT_MASK32 (0x00000001) -#define INTC_IMRH_INT_MASK33 (0x00000002) -#define INTC_IMRH_INT_MASK34 (0x00000004) -#define INTC_IMRH_INT_MASK35 (0x00000008) -#define INTC_IMRH_INT_MASK36 (0x00000010) -#define INTC_IMRH_INT_MASK37 (0x00000020) -#define INTC_IMRH_INT_MASK38 (0x00000040) -#define INTC_IMRH_INT_MASK39 (0x00000080) -#define INTC_IMRH_INT_MASK40 (0x00000100) -#define INTC_IMRH_INT_MASK41 (0x00000200) -#define INTC_IMRH_INT_MASK42 (0x00000400) -#define INTC_IMRH_INT_MASK43 (0x00000800) -#define INTC_IMRH_INT_MASK44 (0x00001000) -#define INTC_IMRH_INT_MASK45 (0x00002000) -#define INTC_IMRH_INT_MASK46 (0x00004000) -#define INTC_IMRH_INT_MASK47 (0x00008000) -#define INTC_IMRH_INT_MASK48 (0x00010000) -#define INTC_IMRH_INT_MASK49 (0x00020000) -#define INTC_IMRH_INT_MASK50 (0x00040000) -#define INTC_IMRH_INT_MASK51 (0x00080000) -#define INTC_IMRH_INT_MASK52 (0x00100000) -#define INTC_IMRH_INT_MASK53 (0x00200000) -#define INTC_IMRH_INT_MASK54 (0x00400000) -#define INTC_IMRH_INT_MASK55 (0x00800000) -#define INTC_IMRH_INT_MASK56 (0x01000000) -#define INTC_IMRH_INT_MASK57 (0x02000000) -#define INTC_IMRH_INT_MASK58 (0x04000000) -#define INTC_IMRH_INT_MASK59 (0x08000000) -#define INTC_IMRH_INT_MASK60 (0x10000000) -#define INTC_IMRH_INT_MASK61 (0x20000000) -#define INTC_IMRH_INT_MASK62 (0x40000000) -#define INTC_IMRH_INT_MASK63 (0x80000000) - -/* Bit definitions and macros for IMRL */ -#define INTC_IMRL_INT_MASK0 (0x00000001) -#define INTC_IMRL_INT_MASK1 (0x00000002) -#define INTC_IMRL_INT_MASK2 (0x00000004) -#define INTC_IMRL_INT_MASK3 (0x00000008) -#define INTC_IMRL_INT_MASK4 (0x00000010) -#define INTC_IMRL_INT_MASK5 (0x00000020) -#define INTC_IMRL_INT_MASK6 (0x00000040) -#define INTC_IMRL_INT_MASK7 (0x00000080) -#define INTC_IMRL_INT_MASK8 (0x00000100) -#define INTC_IMRL_INT_MASK9 (0x00000200) -#define INTC_IMRL_INT_MASK10 (0x00000400) -#define INTC_IMRL_INT_MASK11 (0x00000800) -#define INTC_IMRL_INT_MASK12 (0x00001000) -#define INTC_IMRL_INT_MASK13 (0x00002000) -#define INTC_IMRL_INT_MASK14 (0x00004000) -#define INTC_IMRL_INT_MASK15 (0x00008000) -#define INTC_IMRL_INT_MASK16 (0x00010000) -#define INTC_IMRL_INT_MASK17 (0x00020000) -#define INTC_IMRL_INT_MASK18 (0x00040000) -#define INTC_IMRL_INT_MASK19 (0x00080000) -#define INTC_IMRL_INT_MASK20 (0x00100000) -#define INTC_IMRL_INT_MASK21 (0x00200000) -#define INTC_IMRL_INT_MASK22 (0x00400000) -#define INTC_IMRL_INT_MASK23 (0x00800000) -#define INTC_IMRL_INT_MASK24 (0x01000000) -#define INTC_IMRL_INT_MASK25 (0x02000000) -#define INTC_IMRL_INT_MASK26 (0x04000000) -#define INTC_IMRL_INT_MASK27 (0x08000000) -#define INTC_IMRL_INT_MASK28 (0x10000000) -#define INTC_IMRL_INT_MASK29 (0x20000000) -#define INTC_IMRL_INT_MASK30 (0x40000000) -#define INTC_IMRL_INT_MASK31 (0x80000000) - -/* Bit definitions and macros for INTFRCH */ -#define INTC_INTFRCH_INTFRC32 (0x00000001) -#define INTC_INTFRCH_INTFRC33 (0x00000002) -#define INTC_INTFRCH_INTFRC34 (0x00000004) -#define INTC_INTFRCH_INTFRC35 (0x00000008) -#define INTC_INTFRCH_INTFRC36 (0x00000010) -#define INTC_INTFRCH_INTFRC37 (0x00000020) -#define INTC_INTFRCH_INTFRC38 (0x00000040) -#define INTC_INTFRCH_INTFRC39 (0x00000080) -#define INTC_INTFRCH_INTFRC40 (0x00000100) -#define INTC_INTFRCH_INTFRC41 (0x00000200) -#define INTC_INTFRCH_INTFRC42 (0x00000400) -#define INTC_INTFRCH_INTFRC43 (0x00000800) -#define INTC_INTFRCH_INTFRC44 (0x00001000) -#define INTC_INTFRCH_INTFRC45 (0x00002000) -#define INTC_INTFRCH_INTFRC46 (0x00004000) -#define INTC_INTFRCH_INTFRC47 (0x00008000) -#define INTC_INTFRCH_INTFRC48 (0x00010000) -#define INTC_INTFRCH_INTFRC49 (0x00020000) -#define INTC_INTFRCH_INTFRC50 (0x00040000) -#define INTC_INTFRCH_INTFRC51 (0x00080000) -#define INTC_INTFRCH_INTFRC52 (0x00100000) -#define INTC_INTFRCH_INTFRC53 (0x00200000) -#define INTC_INTFRCH_INTFRC54 (0x00400000) -#define INTC_INTFRCH_INTFRC55 (0x00800000) -#define INTC_INTFRCH_INTFRC56 (0x01000000) -#define INTC_INTFRCH_INTFRC57 (0x02000000) -#define INTC_INTFRCH_INTFRC58 (0x04000000) -#define INTC_INTFRCH_INTFRC59 (0x08000000) -#define INTC_INTFRCH_INTFRC60 (0x10000000) -#define INTC_INTFRCH_INTFRC61 (0x20000000) -#define INTC_INTFRCH_INTFRC62 (0x40000000) -#define INTC_INTFRCH_INTFRC63 (0x80000000) - -/* Bit definitions and macros for INTFRCL */ -#define INTC_INTFRCL_INTFRC0 (0x00000001) -#define INTC_INTFRCL_INTFRC1 (0x00000002) -#define INTC_INTFRCL_INTFRC2 (0x00000004) -#define INTC_INTFRCL_INTFRC3 (0x00000008) -#define INTC_INTFRCL_INTFRC4 (0x00000010) -#define INTC_INTFRCL_INTFRC5 (0x00000020) -#define INTC_INTFRCL_INTFRC6 (0x00000040) -#define INTC_INTFRCL_INTFRC7 (0x00000080) -#define INTC_INTFRCL_INTFRC8 (0x00000100) -#define INTC_INTFRCL_INTFRC9 (0x00000200) -#define INTC_INTFRCL_INTFRC10 (0x00000400) -#define INTC_INTFRCL_INTFRC11 (0x00000800) -#define INTC_INTFRCL_INTFRC12 (0x00001000) -#define INTC_INTFRCL_INTFRC13 (0x00002000) -#define INTC_INTFRCL_INTFRC14 (0x00004000) -#define INTC_INTFRCL_INTFRC15 (0x00008000) -#define INTC_INTFRCL_INTFRC16 (0x00010000) -#define INTC_INTFRCL_INTFRC17 (0x00020000) -#define INTC_INTFRCL_INTFRC18 (0x00040000) -#define INTC_INTFRCL_INTFRC19 (0x00080000) -#define INTC_INTFRCL_INTFRC20 (0x00100000) -#define INTC_INTFRCL_INTFRC21 (0x00200000) -#define INTC_INTFRCL_INTFRC22 (0x00400000) -#define INTC_INTFRCL_INTFRC23 (0x00800000) -#define INTC_INTFRCL_INTFRC24 (0x01000000) -#define INTC_INTFRCL_INTFRC25 (0x02000000) -#define INTC_INTFRCL_INTFRC26 (0x04000000) -#define INTC_INTFRCL_INTFRC27 (0x08000000) -#define INTC_INTFRCL_INTFRC28 (0x10000000) -#define INTC_INTFRCL_INTFRC29 (0x20000000) -#define INTC_INTFRCL_INTFRC30 (0x40000000) -#define INTC_INTFRCL_INTFRC31 (0x80000000) - -/* Bit definitions and macros for ICONFIG */ -#define INTC_ICONFIG_EMASK (0x0020) -#define INTC_ICONFIG_ELVLPRI1 (0x0200) -#define INTC_ICONFIG_ELVLPRI2 (0x0400) -#define INTC_ICONFIG_ELVLPRI3 (0x0800) -#define INTC_ICONFIG_ELVLPRI4 (0x1000) -#define INTC_ICONFIG_ELVLPRI5 (0x2000) -#define INTC_ICONFIG_ELVLPRI6 (0x4000) -#define INTC_ICONFIG_ELVLPRI7 (0x8000) - -/* Bit definitions and macros for SIMR */ -#define INTC_SIMR_SIMR(x) (((x)&0x7F)) - -/* Bit definitions and macros for CIMR */ -#define INTC_CIMR_CIMR(x) (((x)&0x7F)) - -/* Bit definitions and macros for CLMASK */ -#define INTC_CLMASK_CLMASK(x) (((x)&0x0F)) - -/* Bit definitions and macros for SLMASK */ -#define INTC_SLMASK_SLMASK(x) (((x)&0x0F)) - -/* Bit definitions and macros for ICR group */ -#define INTC_ICR_IL(x) (((x)&0x07)) - -/********************************************************************* -* Edge Port Module (EPORT) -*********************************************************************/ - -/* Bit definitions and macros for EPPAR */ -#define EPORT_EPPAR_EPPA1(x) (((x)&0x0003)<<2) -#define EPORT_EPPAR_EPPA2(x) (((x)&0x0003)<<4) -#define EPORT_EPPAR_EPPA3(x) (((x)&0x0003)<<6) -#define EPORT_EPPAR_EPPA4(x) (((x)&0x0003)<<8) -#define EPORT_EPPAR_EPPA5(x) (((x)&0x0003)<<10) -#define EPORT_EPPAR_EPPA6(x) (((x)&0x0003)<<12) -#define EPORT_EPPAR_EPPA7(x) (((x)&0x0003)<<14) -#define EPORT_EPPAR_LEVEL (0) -#define EPORT_EPPAR_RISING (1) -#define EPORT_EPPAR_FALLING (2) -#define EPORT_EPPAR_BOTH (3) -#define EPORT_EPPAR_EPPA7_LEVEL (0x0000) -#define EPORT_EPPAR_EPPA7_RISING (0x4000) -#define EPORT_EPPAR_EPPA7_FALLING (0x8000) -#define EPORT_EPPAR_EPPA7_BOTH (0xC000) -#define EPORT_EPPAR_EPPA6_LEVEL (0x0000) -#define EPORT_EPPAR_EPPA6_RISING (0x1000) -#define EPORT_EPPAR_EPPA6_FALLING (0x2000) -#define EPORT_EPPAR_EPPA6_BOTH (0x3000) -#define EPORT_EPPAR_EPPA5_LEVEL (0x0000) -#define EPORT_EPPAR_EPPA5_RISING (0x0400) -#define EPORT_EPPAR_EPPA5_FALLING (0x0800) -#define EPORT_EPPAR_EPPA5_BOTH (0x0C00) -#define EPORT_EPPAR_EPPA4_LEVEL (0x0000) -#define EPORT_EPPAR_EPPA4_RISING (0x0100) -#define EPORT_EPPAR_EPPA4_FALLING (0x0200) -#define EPORT_EPPAR_EPPA4_BOTH (0x0300) -#define EPORT_EPPAR_EPPA3_LEVEL (0x0000) -#define EPORT_EPPAR_EPPA3_RISING (0x0040) -#define EPORT_EPPAR_EPPA3_FALLING (0x0080) -#define EPORT_EPPAR_EPPA3_BOTH (0x00C0) -#define EPORT_EPPAR_EPPA2_LEVEL (0x0000) -#define EPORT_EPPAR_EPPA2_RISING (0x0010) -#define EPORT_EPPAR_EPPA2_FALLING (0x0020) -#define EPORT_EPPAR_EPPA2_BOTH (0x0030) -#define EPORT_EPPAR_EPPA1_LEVEL (0x0000) -#define EPORT_EPPAR_EPPA1_RISING (0x0004) -#define EPORT_EPPAR_EPPA1_FALLING (0x0008) -#define EPORT_EPPAR_EPPA1_BOTH (0x000C) - -/* Bit definitions and macros for EPDDR */ -#define EPORT_EPDDR_EPDD1 (0x02) -#define EPORT_EPDDR_EPDD2 (0x04) -#define EPORT_EPDDR_EPDD3 (0x08) -#define EPORT_EPDDR_EPDD4 (0x10) -#define EPORT_EPDDR_EPDD5 (0x20) -#define EPORT_EPDDR_EPDD6 (0x40) -#define EPORT_EPDDR_EPDD7 (0x80) - -/* Bit definitions and macros for EPIER */ -#define EPORT_EPIER_EPIE1 (0x02) -#define EPORT_EPIER_EPIE2 (0x04) -#define EPORT_EPIER_EPIE3 (0x08) -#define EPORT_EPIER_EPIE4 (0x10) -#define EPORT_EPIER_EPIE5 (0x20) -#define EPORT_EPIER_EPIE6 (0x40) -#define EPORT_EPIER_EPIE7 (0x80) - -/* Bit definitions and macros for EPDR */ -#define EPORT_EPDR_EPD1 (0x02) -#define EPORT_EPDR_EPD2 (0x04) -#define EPORT_EPDR_EPD3 (0x08) -#define EPORT_EPDR_EPD4 (0x10) -#define EPORT_EPDR_EPD5 (0x20) -#define EPORT_EPDR_EPD6 (0x40) -#define EPORT_EPDR_EPD7 (0x80) - -/* Bit definitions and macros for EPPDR */ -#define EPORT_EPPDR_EPPD1 (0x02) -#define EPORT_EPPDR_EPPD2 (0x04) -#define EPORT_EPPDR_EPPD3 (0x08) -#define EPORT_EPPDR_EPPD4 (0x10) -#define EPORT_EPPDR_EPPD5 (0x20) -#define EPORT_EPPDR_EPPD6 (0x40) -#define EPORT_EPPDR_EPPD7 (0x80) - -/* Bit definitions and macros for EPFR */ -#define EPORT_EPFR_EPF1 (0x02) -#define EPORT_EPFR_EPF2 (0x04) -#define EPORT_EPFR_EPF3 (0x08) -#define EPORT_EPFR_EPF4 (0x10) -#define EPORT_EPFR_EPF5 (0x20) -#define EPORT_EPFR_EPF6 (0x40) -#define EPORT_EPFR_EPF7 (0x80) - /********************************************************************* * Watchdog Timer Modules (WTM) *********************************************************************/ @@ -1040,24 +721,6 @@ #define GPIO_DSCR_ATA_ATA_LOAD_10PF (0x00) /********************************************************************* -* Random Number Generator (RNG) -*********************************************************************/ - -/* Bit definitions and macros for RNGCR */ -#define RNG_RNGCR_GO (0x00000001) -#define RNG_RNGCR_HA (0x00000002) -#define RNG_RNGCR_IM (0x00000004) -#define RNG_RNGCR_CI (0x00000008) - -/* Bit definitions and macros for RNGSR */ -#define RNG_RNGSR_SV (0x00000001) -#define RNG_RNGSR_LRS (0x00000002) -#define RNG_RNGSR_FUF (0x00000004) -#define RNG_RNGSR_EI (0x00000008) -#define RNG_RNGSR_OFL(x) (((x)&0x000000FF)<<8) -#define RNG_RNGSR_OFS(x) (((x)&0x000000FF)<<16) - -/********************************************************************* * SDRAM Controller (SDRAMC) *********************************************************************/ diff --git a/include/asm-m68k/m547x_8x.h b/include/asm-m68k/m547x_8x.h index 2db8df26f2..23cee8e5e4 100644 --- a/include/asm-m68k/m547x_8x.h +++ b/include/asm-m68k/m547x_8x.h @@ -305,74 +305,6 @@ #define INT0_HI_GPT1 (61) #define INT0_HI_GPT0 (62) -/* Bit definitions and macros for IPRH */ -#define INTC_IPRH_INT32 (0x00000001) -#define INTC_IPRH_INT33 (0x00000002) -#define INTC_IPRH_INT34 (0x00000004) -#define INTC_IPRH_INT35 (0x00000008) -#define INTC_IPRH_INT36 (0x00000010) -#define INTC_IPRH_INT37 (0x00000020) -#define INTC_IPRH_INT38 (0x00000040) -#define INTC_IPRH_INT39 (0x00000080) -#define INTC_IPRH_INT40 (0x00000100) -#define INTC_IPRH_INT41 (0x00000200) -#define INTC_IPRH_INT42 (0x00000400) -#define INTC_IPRH_INT43 (0x00000800) -#define INTC_IPRH_INT44 (0x00001000) -#define INTC_IPRH_INT45 (0x00002000) -#define INTC_IPRH_INT46 (0x00004000) -#define INTC_IPRH_INT47 (0x00008000) -#define INTC_IPRH_INT48 (0x00010000) -#define INTC_IPRH_INT49 (0x00020000) -#define INTC_IPRH_INT50 (0x00040000) -#define INTC_IPRH_INT51 (0x00080000) -#define INTC_IPRH_INT52 (0x00100000) -#define INTC_IPRH_INT53 (0x00200000) -#define INTC_IPRH_INT54 (0x00400000) -#define INTC_IPRH_INT55 (0x00800000) -#define INTC_IPRH_INT56 (0x01000000) -#define INTC_IPRH_INT57 (0x02000000) -#define INTC_IPRH_INT58 (0x04000000) -#define INTC_IPRH_INT59 (0x08000000) -#define INTC_IPRH_INT60 (0x10000000) -#define INTC_IPRH_INT61 (0x20000000) -#define INTC_IPRH_INT62 (0x40000000) -#define INTC_IPRH_INT63 (0x80000000) - -/* Bit definitions and macros for IPRL */ -#define INTC_IPRL_INT0 (0x00000001) -#define INTC_IPRL_INT1 (0x00000002) -#define INTC_IPRL_INT2 (0x00000004) -#define INTC_IPRL_INT3 (0x00000008) -#define INTC_IPRL_INT4 (0x00000010) -#define INTC_IPRL_INT5 (0x00000020) -#define INTC_IPRL_INT6 (0x00000040) -#define INTC_IPRL_INT7 (0x00000080) -#define INTC_IPRL_INT8 (0x00000100) -#define INTC_IPRL_INT9 (0x00000200) -#define INTC_IPRL_INT10 (0x00000400) -#define INTC_IPRL_INT11 (0x00000800) -#define INTC_IPRL_INT12 (0x00001000) -#define INTC_IPRL_INT13 (0x00002000) -#define INTC_IPRL_INT14 (0x00004000) -#define INTC_IPRL_INT15 (0x00008000) -#define INTC_IPRL_INT16 (0x00010000) -#define INTC_IPRL_INT17 (0x00020000) -#define INTC_IPRL_INT18 (0x00040000) -#define INTC_IPRL_INT19 (0x00080000) -#define INTC_IPRL_INT20 (0x00100000) -#define INTC_IPRL_INT21 (0x00200000) -#define INTC_IPRL_INT22 (0x00400000) -#define INTC_IPRL_INT23 (0x00800000) -#define INTC_IPRL_INT24 (0x01000000) -#define INTC_IPRL_INT25 (0x02000000) -#define INTC_IPRL_INT26 (0x04000000) -#define INTC_IPRL_INT27 (0x08000000) -#define INTC_IPRL_INT28 (0x10000000) -#define INTC_IPRL_INT29 (0x20000000) -#define INTC_IPRL_INT30 (0x40000000) -#define INTC_IPRL_INT31 (0x80000000) - /********************************************************************* * General Purpose Timers (GPTMR) *********************************************************************/ diff --git a/include/common.h b/include/common.h index b8a654a8ad..df64bf0f41 100644 --- a/include/common.h +++ b/include/common.h @@ -177,6 +177,9 @@ typedef void (interrupt_handler_t)(void *); ({ typeof (X) __x = (X), __y = (Y); \ (__x > __y) ? __x : __y; }) +#define MIN(x, y) min(x, y) +#define MAX(x, y) max(x, y) + /** * container_of - cast a member of a structure out to the containing structure diff --git a/include/configs/EB+MCF-EV123.h b/include/configs/EB+MCF-EV123.h index 876ec20ad1..a13db7c229 100644 --- a/include/configs/EB+MCF-EV123.h +++ b/include/configs/EB+MCF-EV123.h @@ -178,7 +178,7 @@ #define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_SDRAM_BASE1 #define CONFIG_SYS_SDRAM_SIZE CONFIG_SYS_SDRAM_SIZE1 -#define CONFIG_SYS_FLASH_BASE 0xFFE00000 +#define CONFIG_SYS_FLASH_BASE CONFIG_SYS_CS0_BASE #define CONFIG_SYS_INT_FLASH_BASE 0xF0000000 #define CONFIG_SYS_INT_FLASH_ENABLE 0x21 @@ -218,17 +218,13 @@ * Memory bank definitions */ -#define CONFIG_SYS_CS0_BASE CONFIG_SYS_FLASH_BASE -#define CONFIG_SYS_CS0_SIZE 2*1024*1024 -#define CONFIG_SYS_CS0_WIDTH 16 -#define CONFIG_SYS_CS0_RO 0 -#define CONFIG_SYS_CS0_WS 6 +#define CONFIG_SYS_CS0_BASE 0xFFE00000 +#define CONFIG_SYS_CS0_CTRL 0x00001980 +#define CONFIG_SYS_CS0_MASK 0x001F0001 #define CONFIG_SYS_CS3_BASE 0xE0000000 -#define CONFIG_SYS_CS3_SIZE 1*1024*1024 -#define CONFIG_SYS_CS3_WIDTH 16 -#define CONFIG_SYS_CS3_RO 0 -#define CONFIG_SYS_CS3_WS 6 +#define CONFIG_SYS_CS0_CTRL 0x00001980 +#define CONFIG_SYS_CS3_MASK 0x000F0001 /*----------------------------------------------------------------------- * Port configuration diff --git a/include/configs/M52277EVB.h b/include/configs/M52277EVB.h index b6226c6fd9..5d5966fc03 100644 --- a/include/configs/M52277EVB.h +++ b/include/configs/M52277EVB.h @@ -40,7 +40,7 @@ #define CONFIG_MCFUART #define CONFIG_SYS_UART_PORT (0) -#define CONFIG_BAUDRATE 115200 +#define CONFIG_BAUDRATE 115200 #define CONFIG_SYS_BAUDRATE_TABLE { 9600 , 19200 , 38400 , 57600, 115200 } #undef CONFIG_WATCHDOG @@ -72,21 +72,50 @@ #define CONFIG_CMD_REGINFO #undef CONFIG_CMD_USB #undef CONFIG_CMD_BMP - -#define CONFIG_HOSTNAME M52277EVB +#define CONFIG_CMD_SPI +#define CONFIG_CMD_SF + +#define CONFIG_HOSTNAME M52277EVB +#define CONFIG_SYS_UBOOT_END 0x3FFFF +#define CONFIG_SYS_LOAD_ADDR2 0x40010007 +#ifdef CONFIG_SYS_STMICRO_BOOT +/* ST Micro serial flash */ #define CONFIG_EXTRA_ENV_SETTINGS \ "inpclk=" MK_STR(CONFIG_SYS_INPUT_CLKSRC) "\0" \ - "loadaddr=" MK_STR(CONFIG_SYS_LOAD_ADDR) "\0" \ - "u-boot=u-boot.bin\0" \ - "load=tftp ${loadaddr) ${u-boot}\0" \ + "loadaddr=0x40010000\0" \ + "uboot=u-boot.bin\0" \ + "load=loadb ${loadaddr} ${baudrate};" \ + "loadb " MK_STR(CONFIG_SYS_LOAD_ADDR2) " ${baudrate} \0" \ "upd=run load; run prog\0" \ - "prog=prot off 0 0x3ffff;" \ - "era 0 3ffff;" \ - "cp.b ${loadaddr} 0 ${filesize};" \ + "prog=sf probe 0:2 10000 1;" \ + "sf erase 0 30000;" \ + "sf write ${loadaddr} 0 30000;" \ "save\0" \ "" +#endif +#ifdef CONFIG_SYS_SPANSION_BOOT +#define CONFIG_EXTRA_ENV_SETTINGS \ + "inpclk=" MK_STR(CONFIG_SYS_INPUT_CLKSRC) "\0" \ + "loadaddr=0x40010000\0" \ + "uboot=u-boot.bin\0" \ + "load=loadb ${loadaddr} ${baudrate}\0" \ + "upd=run load; run prog\0" \ + "prog=prot off " MK_STR(CONFIG_SYS_FLASH_BASE) \ + " " MK_STR(CONFIG_SYS_UBOOT_END) ";" \ + "era " MK_STR(CONFIG_SYS_FLASH_BASE) " " \ + MK_STR(CONFIG_SYS_UBOOT_END) ";" \ + "cp.b ${loadaddr} " MK_STR(CONFIG_SYS_FLASH_BASE) \ + " ${filesize}; save\0" \ + "updsbf=run loadsbf; run progsbf\0" \ + "loadsbf=loadb ${loadaddr} ${baudrate};" \ + "loadb " MK_STR(CONFIG_SYS_LOAD_ADDR2) " ${baudrate} \0" \ + "progsbf=sf probe 0:2 10000 1;" \ + "sf erase 0 30000;" \ + "sf write ${loadaddr} 0 30000;" \ + "" +#endif -#define CONFIG_BOOTDELAY 3 /* autoboot after 3 seconds */ +#define CONFIG_BOOTDELAY 3 /* autoboot after 3 seconds */ /* LCD */ #ifdef CONFIG_CMD_BMP #define CONFIG_LCD @@ -102,7 +131,7 @@ #define CONFIG_DOS_PARTITION #define CONFIG_MAC_PARTITION #define CONFIG_ISO_PARTITION -#define CONFIG_SYS_USB_EHCI_REGS_BASE 0xFC0B0000 +#define CONFIG_SYS_USB_EHCI_REGS_BASE 0xFC0B0000 #define CONFIG_SYS_USB_EHCI_CPU_INIT #endif @@ -122,30 +151,53 @@ #define CONFIG_SYS_I2C_SPEED 80000 /* I2C speed and slave address */ #define CONFIG_SYS_I2C_SLAVE 0x7F #define CONFIG_SYS_I2C_OFFSET 0x58000 -#define CONFIG_SYS_IMMR CONFIG_SYS_MBAR +#define CONFIG_SYS_IMMR CONFIG_SYS_MBAR + +/* DSPI and Serial Flash */ +#define CONFIG_CF_DSPI +#define CONFIG_HARD_SPI +#define CONFIG_SYS_SER_FLASH_BASE 0x01000000 +#define CONFIG_SYS_SBFHDR_SIZE 0x7 +#ifdef CONFIG_CMD_SPI +# define CONFIG_SYS_DSPI_CS2 +# define CONFIG_SPI_FLASH +# define CONFIG_SPI_FLASH_STMICRO + +# define CONFIG_SYS_DSPI_DCTAR0 (DSPI_DCTAR_TRSZ(7) | \ + DSPI_DCTAR_CPOL | \ + DSPI_DCTAR_CPHA | \ + DSPI_DCTAR_PCSSCK_1CLK | \ + DSPI_DCTAR_PASC(0) | \ + DSPI_DCTAR_PDT(0) | \ + DSPI_DCTAR_CSSCK(0) | \ + DSPI_DCTAR_ASC(0) | \ + DSPI_DCTAR_PBR(0) | \ + DSPI_DCTAR_DT(1) | \ + DSPI_DCTAR_BR(1)) +#endif /* Input, PCI, Flexbus, and VCO */ #define CONFIG_EXTRA_CLOCK #define CONFIG_SYS_INPUT_CLKSRC 16000000 -#define CONFIG_PRAM 512 /* 512 KB */ +#define CONFIG_PRAM 2048 /* 2048 KB */ -#define CONFIG_SYS_PROMPT "-> " +#define CONFIG_SYS_PROMPT "-> " #define CONFIG_SYS_LONGHELP /* undef to save memory */ #if defined(CONFIG_CMD_KGDB) -#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ +#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ #else -#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ +#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ #endif -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ -#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ +#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ +#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ +#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ -#define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_SDRAM_BASE + 0x10000) +#define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_SDRAM_BASE + 0x10000) -#define CONFIG_SYS_HZ 1000 +#define CONFIG_SYS_HZ 1000 #define CONFIG_SYS_MBAR 0xFC000000 @@ -155,17 +207,18 @@ * You should know what you are doing if you make changes here. */ -/*----------------------------------------------------------------------- +/* * Definitions for initial stack pointer and data area (in DPRAM) */ #define CONFIG_SYS_INIT_RAM_ADDR 0x80000000 -#define CONFIG_SYS_INIT_RAM_END 0x8000 /* End of used area in internal SRAM */ -#define CONFIG_SYS_INIT_RAM_CTRL 0x21 +#define CONFIG_SYS_INIT_RAM_END 0x8000 /* End of used area in internal SRAM */ +#define CONFIG_SYS_INIT_RAM_CTRL 0x221 #define CONFIG_SYS_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET ((CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE) - 16) -#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET +#define CONFIG_SYS_GBL_DATA_OFFSET ((CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE) - 32) +#define CONFIG_SYS_INIT_SP_OFFSET (CONFIG_SYS_GBL_DATA_OFFSET - 32) +#define CONFIG_SYS_SBFHDR_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - 32) -/*----------------------------------------------------------------------- +/* * Start addresses for the final memory configuration * (Set up by the startup code) * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0 @@ -177,11 +230,16 @@ #define CONFIG_SYS_SDRAM_CTRL 0xE1092000 #define CONFIG_SYS_SDRAM_EMOD 0x81810000 #define CONFIG_SYS_SDRAM_MODE 0x00CD0000 +#define CONFIG_SYS_SDRAM_DRV_STRENGTH 0x00 #define CONFIG_SYS_MEMTEST_START CONFIG_SYS_SDRAM_BASE + 0x400 #define CONFIG_SYS_MEMTEST_END ((CONFIG_SYS_SDRAM_SIZE - 3) << 20) -#define CONFIG_SYS_MONITOR_BASE (CONFIG_SYS_FLASH_BASE + 0x400) +#ifdef CONFIG_CF_SBF +# define CONFIG_SYS_MONITOR_BASE (TEXT_BASE + 0x400) +#else +# define CONFIG_SYS_MONITOR_BASE (CONFIG_SYS_FLASH_BASE + 0x400) +#endif #define CONFIG_SYS_BOOTPARAMS_LEN 64*1024 #define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */ #define CONFIG_SYS_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc() */ @@ -189,24 +247,40 @@ /* Initial Memory map for Linux */ #define CONFIG_SYS_BOOTMAPSZ (CONFIG_SYS_SDRAM_BASE + (CONFIG_SYS_SDRAM_SIZE << 20)) -/* Configuration for environment +/* + * Configuration for environment * Environment is embedded in u-boot in the second sector of the flash */ -#define CONFIG_ENV_IS_IN_FLASH 1 -#define CONFIG_ENV_OVERWRITE 1 +#ifdef CONFIG_CF_SBF +# define CONFIG_ENV_IS_IN_SPI_FLASH +# define CONFIG_ENV_SPI_CS 2 +#else +# define CONFIG_ENV_IS_IN_FLASH 1 +#endif +#define CONFIG_ENV_OVERWRITE 1 #undef CONFIG_ENV_IS_EMBEDDED /*----------------------------------------------------------------------- * FLASH organization */ -#define CONFIG_SYS_FLASH_BASE CONFIG_SYS_CS0_BASE -#define CONFIG_SYS_FLASH0_BASE CONFIG_SYS_CS0_BASE -#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + 0x8000) -#define CONFIG_ENV_SECT_SIZE 0x8000 +#ifdef CONFIG_SYS_STMICRO_BOOT +# define CONFIG_SYS_FLASH_BASE CONFIG_SYS_SER_FLASH_BASE +# define CONFIG_SYS_FLASH0_BASE CONFIG_SYS_SER_FLASH_BASE +# define CONFIG_SYS_FLASH1_BASE CONFIG_SYS_CS0_BASE +# define CONFIG_ENV_OFFSET 0x30000 +# define CONFIG_ENV_SIZE 0x1000 +# define CONFIG_ENV_SECT_SIZE 0x10000 +#endif +#ifdef CONFIG_SYS_SPANSION_BOOT +# define CONFIG_SYS_FLASH_BASE CONFIG_SYS_CS0_BASE +# define CONFIG_SYS_FLASH0_BASE CONFIG_SYS_CS0_BASE +# define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + 0x8000) +# define CONFIG_ENV_SIZE 0x1000 +# define CONFIG_ENV_SECT_SIZE 0x8000 +#endif #define CONFIG_SYS_FLASH_CFI #ifdef CONFIG_SYS_FLASH_CFI - # define CONFIG_FLASH_CFI_DRIVER 1 # define CONFIG_SYS_FLASH_SIZE 0x1000000 /* Max size that the board might have */ # define CONFIG_SYS_FLASH_CFI_WIDTH FLASH_CFI_16BIT @@ -214,6 +288,7 @@ # define CONFIG_SYS_MAX_FLASH_SECT 137 /* max number of sectors on one chip */ # define CONFIG_SYS_FLASH_PROTECTION /* "Real" (hardware) sectors protection */ # define CONFIG_SYS_FLASH_CHECKSUM +# define CONFIG_SYS_FLASH_BANKS_LIST { CONFIG_SYS_CS0_BASE } #endif /* @@ -229,7 +304,7 @@ /*----------------------------------------------------------------------- * Cache Configuration */ -#define CONFIG_SYS_CACHELINE_SIZE 16 +#define CONFIG_SYS_CACHELINE_SIZE 16 /*----------------------------------------------------------------------- * Memory bank definitions @@ -243,8 +318,14 @@ * CS5 - Available */ +#ifdef CONFIG_CF_SBF +#define CONFIG_SYS_CS0_BASE 0x04000000 +#define CONFIG_SYS_CS0_MASK 0x00FF0001 +#define CONFIG_SYS_CS0_CTRL 0x00001FA0 +#else #define CONFIG_SYS_CS0_BASE 0x00000000 #define CONFIG_SYS_CS0_MASK 0x00FF0001 #define CONFIG_SYS_CS0_CTRL 0x00001FA0 +#endif #endif /* _M52277EVB_H */ diff --git a/include/configs/M5235EVB.h b/include/configs/M5235EVB.h index e6c87efef0..8c66f879e8 100644 --- a/include/configs/M5235EVB.h +++ b/include/configs/M5235EVB.h @@ -215,7 +215,7 @@ # define CONFIG_SYS_FLASH_PROTECTION /* "Real" (hardware) sectors protection */ #endif -#define CONFIG_SYS_FLASH_BASE (CONFIG_SYS_CS0_BASE << 16) +#define CONFIG_SYS_FLASH_BASE (CONFIG_SYS_CS0_BASE) /* Configuration for environment * Environment is embedded in u-boot in the second sector of the flash @@ -251,13 +251,13 @@ * CS7 - Available */ #ifdef NORFLASH_PS32BIT -# define CONFIG_SYS_CS0_BASE 0xFFC0 +# define CONFIG_SYS_CS0_BASE 0xFFC00000 # define CONFIG_SYS_CS0_MASK 0x003f0001 -# define CONFIG_SYS_CS0_CTRL 0x1D00 +# define CONFIG_SYS_CS0_CTRL 0x00001D00 #else -# define CONFIG_SYS_CS0_BASE 0xFFE0 +# define CONFIG_SYS_CS0_BASE 0xFFE00000 # define CONFIG_SYS_CS0_MASK 0x001f0001 -# define CONFIG_SYS_CS0_CTRL 0x1D80 +# define CONFIG_SYS_CS0_CTRL 0x00001D80 #endif #endif /* _M5329EVB_H */ diff --git a/include/configs/M5249EVB.h b/include/configs/M5249EVB.h index 8699ef98ee..e3830e5369 100644 --- a/include/configs/M5249EVB.h +++ b/include/configs/M5249EVB.h @@ -125,7 +125,7 @@ */ #define CONFIG_SYS_SDRAM_BASE 0x00000000 #define CONFIG_SYS_SDRAM_SIZE 16 /* SDRAM size in MB */ -#define CONFIG_SYS_FLASH_BASE (CONFIG_SYS_CSAR0 << 16) +#define CONFIG_SYS_FLASH_BASE (CONFIG_SYS_CS0_BASE) #if 0 /* test-only */ #define CONFIG_PRAM 512 /* test-only for SDRAM problem!!!!!!!!!!!!!!!!!!!! */ @@ -170,15 +170,15 @@ */ /* CS0 - AMD Flash, address 0xffc00000 */ -#define CONFIG_SYS_CSAR0 0xffe0 -#define CONFIG_SYS_CSCR0 0x1980 /* WS=0110, AA=1, PS=10 */ +#define CONFIG_SYS_CS0_BASE 0xffe00000 +#define CONFIG_SYS_CS0_CTRL 0x00001980 /* WS=0110, AA=1, PS=10 */ /** Note: There is a CSMR0/DRAM vector problem, need to disable C/I ***/ -#define CONFIG_SYS_CSMR0 0x003f0021 /* 4MB, AA=0, WP=0, C/I=1, V=1 */ +#define CONFIG_SYS_CS0_MASK 0x003f0021 /* 4MB, AA=0, WP=0, C/I=1, V=1 */ /* CS1 - FPGA, address 0xe0000000 */ -#define CONFIG_SYS_CSAR1 0xe000 -#define CONFIG_SYS_CSCR1 0x0d80 /* WS=0011, AA=1, PS=10 */ -#define CONFIG_SYS_CSMR1 0x00010001 /* 128kB, AA=0, WP=0, C/I=0, V=1*/ +#define CONFIG_SYS_CS1_BASE 0xe0000000 +#define CONFIG_SYS_CS1_CTRL 0x00000d80 /* WS=0011, AA=1, PS=10 */ +#define CONFIG_SYS_CS1_MASK 0x00010001 /* 128kB, AA=0, WP=0, C/I=0, V=1*/ /*----------------------------------------------------------------------- * Port configuration diff --git a/include/configs/M5253DEMO.h b/include/configs/M5253DEMO.h index 3a5c12faa4..378e45a446 100644 --- a/include/configs/M5253DEMO.h +++ b/include/configs/M5253DEMO.h @@ -90,7 +90,7 @@ #define CONFIG_DRIVER_DM9000 #ifdef CONFIG_DRIVER_DM9000 -# define CONFIG_DM9000_BASE ((CONFIG_SYS_CSAR1 << 16) | 0x300) +# define CONFIG_DM9000_BASE (CONFIG_SYS_CS1_BASE | 0x300) # define DM9000_IO CONFIG_DM9000_BASE # define DM9000_DATA (CONFIG_DM9000_BASE + 4) # undef CONFIG_DM9000_DEBUG @@ -202,7 +202,7 @@ #define CONFIG_SYS_BOOTMAPSZ (CONFIG_SYS_SDRAM_BASE + (CONFIG_SYS_SDRAM_SIZE << 20)) /* FLASH organization */ -#define CONFIG_SYS_FLASH_BASE (CONFIG_SYS_CSAR0 << 16) +#define CONFIG_SYS_FLASH_BASE (CONFIG_SYS_CS0_BASE) #define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of memory banks */ #define CONFIG_SYS_MAX_FLASH_SECT 2048 /* max number of sectors on one chip */ #define CONFIG_SYS_FLASH_ERASE_TOUT 1000 @@ -233,21 +233,13 @@ /* Port configuration */ #define CONFIG_SYS_FECI2C 0xF0 -#define CONFIG_SYS_CSAR0 0xFF80 -#define CONFIG_SYS_CSMR0 0x007F0021 -#define CONFIG_SYS_CSCR0 0x1D80 +#define CONFIG_SYS_CS0_BASE 0xFF800000 +#define CONFIG_SYS_CS0_MASK 0x007F0021 +#define CONFIG_SYS_CS0_CTRL 0x00001D80 -#define CONFIG_SYS_CSAR1 0xE000 -#define CONFIG_SYS_CSMR1 0x00000001 -#define CONFIG_SYS_CSCR1 0x3DD8 - -#define CONFIG_SYS_CSAR2 0 -#define CONFIG_SYS_CSMR2 0 -#define CONFIG_SYS_CSCR2 0 - -#define CONFIG_SYS_CSAR3 0 -#define CONFIG_SYS_CSMR3 0 -#define CONFIG_SYS_CSCR3 0 +#define CONFIG_SYS_CS1_BASE 0xE0000000 +#define CONFIG_SYS_CS1_MASK 0x00000001 +#define CONFIG_SYS_CS1_CTRL 0x00003DD8 /*----------------------------------------------------------------------- * Port configuration diff --git a/include/configs/M5253EVBE.h b/include/configs/M5253EVBE.h index c2cd62ba70..86de97d7d0 100644 --- a/include/configs/M5253EVBE.h +++ b/include/configs/M5253EVBE.h @@ -166,7 +166,7 @@ #define CONFIG_SYS_BOOTMAPSZ (CONFIG_SYS_SDRAM_BASE + (CONFIG_SYS_SDRAM_SIZE << 20)) /* FLASH organization */ -#define CONFIG_SYS_FLASH_BASE 0xffe00000 +#define CONFIG_SYS_FLASH_BASE CONFIG_SYS_CS0_BASE #define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of memory banks */ #define CONFIG_SYS_MAX_FLASH_SECT 35 /* max number of sectors on one chip */ #define CONFIG_SYS_FLASH_ERASE_TOUT 1000 @@ -182,21 +182,9 @@ /* Port configuration */ #define CONFIG_SYS_FECI2C 0xF0 -#define CONFIG_SYS_CSAR0 0xFFE0 -#define CONFIG_SYS_CSMR0 0x001F0021 -#define CONFIG_SYS_CSCR0 0x1D80 - -#define CONFIG_SYS_CSAR1 0 -#define CONFIG_SYS_CSMR1 0 -#define CONFIG_SYS_CSCR1 0 - -#define CONFIG_SYS_CSAR2 0 -#define CONFIG_SYS_CSMR2 0 -#define CONFIG_SYS_CSCR2 0 - -#define CONFIG_SYS_CSAR3 0 -#define CONFIG_SYS_CSMR3 0 -#define CONFIG_SYS_CSCR3 0 +#define CONFIG_SYS_CS0_BASE 0xFFE00000 +#define CONFIG_SYS_CS0_MASK 0x001F0021 +#define CONFIG_SYS_CS0_CTRL 0x00001D80 /*----------------------------------------------------------------------- * Port configuration diff --git a/include/configs/M5272C3.h b/include/configs/M5272C3.h index 779d373a54..fc73d64091 100644 --- a/include/configs/M5272C3.h +++ b/include/configs/M5272C3.h @@ -194,12 +194,18 @@ */ #define CONFIG_SYS_BOOTMAPSZ (CONFIG_SYS_SDRAM_BASE + (CONFIG_SYS_SDRAM_SIZE << 20)) -/*----------------------------------------------------------------------- +/* * FLASH organization */ -#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of memory banks */ -#define CONFIG_SYS_MAX_FLASH_SECT 11 /* max number of sectors on one chip */ -#define CONFIG_SYS_FLASH_ERASE_TOUT 1000 +#define CONFIG_SYS_FLASH_CFI +#ifdef CONFIG_SYS_FLASH_CFI +# define CONFIG_FLASH_CFI_DRIVER 1 +# define CONFIG_SYS_FLASH_SIZE 0x800000 /* Max size that the board might have */ +# define CONFIG_SYS_FLASH_CFI_WIDTH FLASH_CFI_16BIT +# define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of memory banks */ +# define CONFIG_SYS_MAX_FLASH_SECT 137 /* max number of sectors on one chip */ +# define CONFIG_SYS_FLASH_PROTECTION /* "Real" (hardware) sectors protection */ +#endif /*----------------------------------------------------------------------- * Cache Configuration diff --git a/include/configs/M5275EVB.h b/include/configs/M5275EVB.h index 1f3539e834..db48d7608b 100644 --- a/include/configs/M5275EVB.h +++ b/include/configs/M5275EVB.h @@ -173,7 +173,7 @@ */ #define CONFIG_SYS_SDRAM_BASE 0x00000000 #define CONFIG_SYS_SDRAM_SIZE 16 /* SDRAM size in MB */ -#define CONFIG_SYS_FLASH_BASE 0xffe00000 +#define CONFIG_SYS_FLASH_BASE CONFIG_SYS_CS0_BASE #ifdef CONFIG_MONITOR_IS_IN_RAM #define CONFIG_SYS_MONITOR_BASE 0x20000 @@ -211,13 +211,13 @@ /*----------------------------------------------------------------------- * Memory bank definitions */ -#define CONFIG_SYS_AR0_PRELIM (CONFIG_SYS_FLASH_BASE >> 16) -#define CONFIG_SYS_CR0_PRELIM 0x1980 -#define CONFIG_SYS_MR0_PRELIM 0x001F0001 +#define CONFIG_SYS_CS0_BASE 0xffe00000 +#define CONFIG_SYS_CS0_CTRL 0x00001980 +#define CONFIG_SYS_CS0_MASK 0x001F0001 -#define CONFIG_SYS_AR1_PRELIM 0x3000 -#define CONFIG_SYS_CR1_PRELIM 0x1900 -#define CONFIG_SYS_MR1_PRELIM 0x00070001 +#define CONFIG_SYS_CS1_BASE 0x30000000 +#define CONFIG_SYS_CS1_CTRL 0x00001900 +#define CONFIG_SYS_CS1_MASK 0x00070001 /*----------------------------------------------------------------------- * Port configuration diff --git a/include/configs/M5282EVB.h b/include/configs/M5282EVB.h index a8a265564d..15590cfcd5 100644 --- a/include/configs/M5282EVB.h +++ b/include/configs/M5282EVB.h @@ -165,7 +165,7 @@ */ #define CONFIG_SYS_SDRAM_BASE 0x00000000 #define CONFIG_SYS_SDRAM_SIZE 16 /* SDRAM size in MB */ -#define CONFIG_SYS_FLASH_BASE 0xffe00000 +#define CONFIG_SYS_FLASH_BASE CONFIG_SYS_CS0_BASE #define CONFIG_SYS_INT_FLASH_BASE 0xf0000000 #define CONFIG_SYS_INT_FLASH_ENABLE 0x21 @@ -212,18 +212,10 @@ /*----------------------------------------------------------------------- * Memory bank definitions */ -#define CONFIG_SYS_CS0_BASE CONFIG_SYS_FLASH_BASE -#define CONFIG_SYS_CS0_SIZE 2*1024*1024 -#define CONFIG_SYS_CS0_WIDTH 16 -#define CONFIG_SYS_CS0_RO 0 -#define CONFIG_SYS_CS0_WS 6 -/* -#define CONFIG_SYS_CS3_BASE 0xE0000000 -#define CONFIG_SYS_CS3_SIZE 1*1024*1024 -#define CONFIG_SYS_CS3_WIDTH 16 -#define CONFIG_SYS_CS3_RO 0 -#define CONFIG_SYS_CS3_WS 6 -*/ +#define CONFIG_SYS_CS0_BASE 0xFFE00000 +#define CONFIG_SYS_CS0_CTRL 0x00001980 +#define CONFIG_SYS_CS0_MASK 0x001F0001 + /*----------------------------------------------------------------------- * Port configuration */ diff --git a/include/configs/M53017EVB.h b/include/configs/M53017EVB.h new file mode 100644 index 0000000000..df54c606be --- /dev/null +++ b/include/configs/M53017EVB.h @@ -0,0 +1,247 @@ +/* + * Configuation settings for the Freescale MCF53017EVB. + * + * Copyright (C) 2004-2008 Freescale Semiconductor, Inc. + * TsiChung Liew (Tsi-Chung.Liew@freescale.com) + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +/* + * board/config.h - configuration options, board specific + */ + +#ifndef _M53017EVB_H +#define _M53017EVB_H + +/* + * High Level Configuration Options + * (easy to change) + */ +#define CONFIG_MCF5301x /* define processor family */ +#define CONFIG_M53015 /* define processor type */ + +#define CONFIG_MCFUART +#define CONFIG_SYS_UART_PORT (0) +#define CONFIG_BAUDRATE 115200 +#define CONFIG_SYS_BAUDRATE_TABLE { 9600 , 19200 , 38400 , 57600, 115200 } + +#undef CONFIG_WATCHDOG +#define CONFIG_WATCHDOG_TIMEOUT 5000 + +/* Command line configuration */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_CACHE +#define CONFIG_CMD_DATE +#define CONFIG_CMD_ELF +#define CONFIG_CMD_FLASH +#undef CONFIG_CMD_I2C +#define CONFIG_CMD_MEMORY +#define CONFIG_CMD_MISC +#define CONFIG_CMD_MII +#define CONFIG_CMD_NET +#define CONFIG_CMD_PING +#define CONFIG_CMD_REGINFO + +#define CONFIG_SYS_UNIFY_CACHE + +#define CONFIG_MCFFEC +#ifdef CONFIG_MCFFEC +# define CONFIG_NET_MULTI 1 +# define CONFIG_MII 1 +# define CONFIG_MII_INIT 1 +# define CONFIG_SYS_DISCOVER_PHY +# define CONFIG_SYS_RX_ETH_BUFFER 8 +# define CONFIG_SYS_FAULT_ECHO_LINK_DOWN +# define CONFIG_HAS_ETH1 + +# define CONFIG_SYS_FEC0_PINMUX 0 +# define CONFIG_SYS_FEC0_MIIBASE CONFIG_SYS_FEC0_IOBASE +# define CONFIG_SYS_FEC1_PINMUX 0 +# define CONFIG_SYS_FEC1_MIIBASE CONFIG_SYS_FEC1_IOBASE +# define MCFFEC_TOUT_LOOP 50000 +/* If CONFIG_SYS_DISCOVER_PHY is not defined - hardcoded */ +# ifndef CONFIG_SYS_DISCOVER_PHY +# define FECDUPLEX FULL +# define FECSPEED _100BASET +# else +# ifndef CONFIG_SYS_FAULT_ECHO_LINK_DOWN +# define CONFIG_SYS_FAULT_ECHO_LINK_DOWN +# endif +# endif /* CONFIG_SYS_DISCOVER_PHY */ +#endif + +#define CONFIG_MCFRTC +#undef RTC_DEBUG +#define CONFIG_SYS_RTC_CNT (0x8000) +#define CONFIG_SYS_RTC_SETUP (RTC_OCEN_OSCBYP | RTC_OCEN_CLKEN) + +/* Timer */ +#define CONFIG_MCFTMR +#undef CONFIG_MCFPIT + +/* I2C */ +#define CONFIG_FSL_I2C +#define CONFIG_HARD_I2C /* I2C with hw support */ +#undef CONFIG_SOFT_I2C /* I2C bit-banged */ +#define CONFIG_SYS_I2C_SPEED 80000 +#define CONFIG_SYS_I2C_SLAVE 0x7F +#define CONFIG_SYS_I2C_OFFSET 0x58000 +#define CONFIG_SYS_IMMR CONFIG_SYS_MBAR + +#define CONFIG_BOOTDELAY 1 /* autoboot after 5 seconds */ +#define CONFIG_UDP_CHECKSUM + +#ifdef CONFIG_MCFFEC +# define CONFIG_ETHADDR 00:e0:0c:bc:e5:60 +# define CONFIG_ETH1ADDR 00:e0:0c:bc:e5:61 +# define CONFIG_IPADDR 192.162.1.2 +# define CONFIG_NETMASK 255.255.255.0 +# define CONFIG_SERVERIP 192.162.1.1 +# define CONFIG_GATEWAYIP 192.162.1.1 +# define CONFIG_OVERWRITE_ETHADDR_ONCE +#endif /* FEC_ENET */ + +#define CONFIG_HOSTNAME M53017 +#define CONFIG_EXTRA_ENV_SETTINGS \ + "netdev=eth0\0" \ + "loadaddr=40010000\0" \ + "u-boot=u-boot.bin\0" \ + "load=tftp ${loadaddr) ${u-boot}\0" \ + "upd=run load; run prog\0" \ + "prog=prot off 0 3ffff;" \ + "era 0 3ffff;" \ + "cp.b ${loadaddr} 0 ${filesize};" \ + "save\0" \ + "" + +#define CONFIG_PRAM 512 /* 512 KB */ +#define CONFIG_SYS_PROMPT "-> " +#define CONFIG_SYS_LONGHELP /* undef to save memory */ + +#ifdef CONFIG_CMD_KGDB +# define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ +#else +# define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ +#endif + +#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ +#define CONFIG_SYS_MAXARGS 16 /* max number of cmd args */ +#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Arg Buf Sz */ +#define CONFIG_SYS_LOAD_ADDR 0x40010000 + +#define CONFIG_SYS_HZ 1000 +#define CONFIG_SYS_CLK 80000000 +#define CONFIG_SYS_CPU_CLK CONFIG_SYS_CLK * 3 + +#define CONFIG_SYS_MBAR 0xFC000000 + +/* + * Low Level Configuration Settings + * (address mappings, register initial values, etc.) + * You should know what you are doing if you make changes here. + */ +/* + * Definitions for initial stack pointer and data area (in DPRAM) + */ +#define CONFIG_SYS_INIT_RAM_ADDR 0x80000000 +#define CONFIG_SYS_INIT_RAM_END 0x20000 /* End of used area in internal SRAM */ +#define CONFIG_SYS_INIT_RAM_CTRL 0x21 +#define CONFIG_SYS_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ +#define CONFIG_SYS_GBL_DATA_OFFSET ((CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE) - 0x10) +#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET + +/* + * Start addresses for the final memory configuration + * (Set up by the startup code) + * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0 + */ +#define CONFIG_SYS_SDRAM_BASE 0x40000000 +#define CONFIG_SYS_SDRAM_SIZE 64 /* SDRAM size in MB */ +#define CONFIG_SYS_SDRAM_CFG1 0x43711630 +#define CONFIG_SYS_SDRAM_CFG2 0x56670000 +#define CONFIG_SYS_SDRAM_CTRL 0xE1002000 +#define CONFIG_SYS_SDRAM_EMOD 0x80010000 +#define CONFIG_SYS_SDRAM_MODE 0x00CD0000 + +#define CONFIG_SYS_MEMTEST_START CONFIG_SYS_SDRAM_BASE + 0x400 +#define CONFIG_SYS_MEMTEST_END ((CONFIG_SYS_SDRAM_SIZE - 3) << 20) + +#define CONFIG_SYS_MONITOR_BASE (CONFIG_SYS_FLASH_BASE + 0x400) +#define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */ + +#define CONFIG_SYS_BOOTPARAMS_LEN 64*1024 +#define CONFIG_SYS_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc() */ + +/* + * For booting Linux, the board info and command line data + * have to be in the first 8 MB of memory, since this is + * the maximum mapped by the Linux kernel during initialization ?? + */ +#define CONFIG_SYS_BOOTMAPSZ (CONFIG_SYS_SDRAM_BASE + (CONFIG_SYS_SDRAM_SIZE << 20)) + +/*----------------------------------------------------------------------- + * FLASH organization + */ +#define CONFIG_SYS_FLASH_CFI +#ifdef CONFIG_SYS_FLASH_CFI +# define CONFIG_FLASH_CFI_DRIVER 1 +# define CONFIG_SYS_FLASH_SIZE 0x800000 /* Max size that the board might have */ +# define CONFIG_SYS_FLASH_CFI_WIDTH FLASH_CFI_16BIT +# define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of memory banks */ +# define CONFIG_SYS_MAX_FLASH_SECT 137 /* max number of sectors on one chip */ +# define CONFIG_SYS_FLASH_PROTECTION /* "Real" (hardware) sectors protection */ +#endif + +#define CONFIG_SYS_FLASH_BASE CONFIG_SYS_CS0_BASE + +/* Configuration for environment + * Environment is embedded in u-boot in the second sector of the flash + */ +#define CONFIG_ENV_OFFSET 0x8000 +#define CONFIG_ENV_SIZE 0x1000 +#define CONFIG_ENV_SECT_SIZE 0x8000 +#define CONFIG_ENV_IS_IN_FLASH 1 + +/*----------------------------------------------------------------------- + * Cache Configuration + */ +#define CONFIG_SYS_CACHELINE_SIZE 16 + +/*----------------------------------------------------------------------- + * Chipselect bank definitions + */ +/* + * CS0 - NOR Flash + * CS1 - Ext SRAM + * CS2 - Available + * CS3 - Available + * CS4 - Available + * CS5 - Available + */ +#define CONFIG_SYS_CS0_BASE 0 +#define CONFIG_SYS_CS0_MASK 0x00FF0001 +#define CONFIG_SYS_CS0_CTRL 0x00001FA0 + +#define CONFIG_SYS_CS1_BASE 0xC0000000 +#define CONFIG_SYS_CS1_MASK 0x00070001 +#define CONFIG_SYS_CS1_CTRL 0x00001FA0 + +#endif /* _M53017EVB_H */ diff --git a/include/configs/MPC8572DS.h b/include/configs/MPC8572DS.h index 244ecc2944..c3693b8565 100644 --- a/include/configs/MPC8572DS.h +++ b/include/configs/MPC8572DS.h @@ -158,7 +158,7 @@ extern unsigned long get_board_ddr_clk(unsigned long dummy); * Localbus non-cacheable * 0xe000_0000 0xe80f_ffff Promjet/free 128M non-cacheable * 0xe800_0000 0xefff_ffff FLASH 128M non-cacheable - * 0xffa0_0000 0xffaf_ffff NAND 1M non-cacheable + * 0xffa0_0000 0xffaf_ffff NAND 1M non-cacheable * 0xffdf_0000 0xffdf_7fff PIXIS 32K non-cacheable TLB0 * 0xffd0_0000 0xffd0_3fff L1 for stack 16K Cacheable TLB0 * 0xffe0_0000 0xffef_ffff CCSR 1M non-cacheable @@ -268,50 +268,49 @@ extern unsigned long get_board_ddr_clk(unsigned long dummy); CONFIG_SYS_NAND_BASE + 0x80000,\ CONFIG_SYS_NAND_BASE + 0xC0000} #define CONFIG_SYS_MAX_NAND_DEVICE 4 -#define NAND_MAX_CHIPS 1 +#define NAND_MAX_CHIPS 1 #define CONFIG_MTD_NAND_VERIFY_WRITE -#define CONFIG_CMD_NAND 1 -#define CONFIG_NAND_FSL_ELBC 1 +#define CONFIG_CMD_NAND 1 +#define CONFIG_NAND_FSL_ELBC 1 #define CONFIG_SYS_NAND_BLOCK_SIZE (128 * 1024) /* NAND flash config */ #define CONFIG_NAND_BR_PRELIM (CONFIG_SYS_NAND_BASE_PHYS \ - | (2<<BR_DECC_SHIFT) /* Use HW ECC */ \ - | BR_PS_8 /* Port Size = 8 bit */ \ - | BR_MS_FCM /* MSEL = FCM */ \ - | BR_V) /* valid */ -#define CONFIG_NAND_OR_PRELIM (0xFFFC0000 /* length 256K */ \ - | OR_FCM_PGS /* Large Page*/ \ - | OR_FCM_CSCT \ - | OR_FCM_CST \ - | OR_FCM_CHT \ - | OR_FCM_SCY_1 \ - | OR_FCM_TRLX \ - | OR_FCM_EHTR) + | (2<<BR_DECC_SHIFT) /* Use HW ECC */ \ + | BR_PS_8 /* Port Size = 8 bit */ \ + | BR_MS_FCM /* MSEL = FCM */ \ + | BR_V) /* valid */ +#define CONFIG_NAND_OR_PRELIM (0xFFFC0000 /* length 256K */ \ + | OR_FCM_PGS /* Large Page*/ \ + | OR_FCM_CSCT \ + | OR_FCM_CST \ + | OR_FCM_CHT \ + | OR_FCM_SCY_1 \ + | OR_FCM_TRLX \ + | OR_FCM_EHTR) #define CONFIG_SYS_BR2_PRELIM CONFIG_NAND_BR_PRELIM /* NAND Base Address */ #define CONFIG_SYS_OR2_PRELIM CONFIG_NAND_OR_PRELIM /* NAND Options */ #define CONFIG_SYS_BR4_PRELIM ((CONFIG_SYS_NAND_BASE_PHYS + 0x40000)\ - | (2<<BR_DECC_SHIFT) /* Use HW ECC */ \ - | BR_PS_8 /* Port Size = 8 bit */ \ - | BR_MS_FCM /* MSEL = FCM */ \ - | BR_V) /* valid */ -#define CONFIG_SYS_OR4_PRELIM CONFIG_NAND_OR_PRELIM /* NAND Options */ + | (2<<BR_DECC_SHIFT) /* Use HW ECC */ \ + | BR_PS_8 /* Port Size = 8 bit */ \ + | BR_MS_FCM /* MSEL = FCM */ \ + | BR_V) /* valid */ +#define CONFIG_SYS_OR4_PRELIM CONFIG_NAND_OR_PRELIM /* NAND Options */ #define CONFIG_SYS_BR5_PRELIM ((CONFIG_SYS_NAND_BASE_PHYS + 0x80000)\ - | (2<<BR_DECC_SHIFT) /* Use HW ECC */ \ - | BR_PS_8 /* Port Size = 8 bit */ \ - | BR_MS_FCM /* MSEL = FCM */ \ - | BR_V) /* valid */ -#define CONFIG_SYS_OR5_PRELIM CONFIG_NAND_OR_PRELIM /* NAND Options */ + | (2<<BR_DECC_SHIFT) /* Use HW ECC */ \ + | BR_PS_8 /* Port Size = 8 bit */ \ + | BR_MS_FCM /* MSEL = FCM */ \ + | BR_V) /* valid */ +#define CONFIG_SYS_OR5_PRELIM CONFIG_NAND_OR_PRELIM /* NAND Options */ #define CONFIG_SYS_BR6_PRELIM ((CONFIG_SYS_NAND_BASE_PHYS + 0xC0000)\ - | (2<<BR_DECC_SHIFT) /* Use HW ECC */ \ - | BR_PS_8 /* Port Size = 8 bit */ \ - | BR_MS_FCM /* MSEL = FCM */ \ - | BR_V) /* valid */ -#define CONFIG_SYS_OR6_PRELIM CONFIG_NAND_OR_PRELIM /* NAND Options */ - + | (2<<BR_DECC_SHIFT) /* Use HW ECC */ \ + | BR_PS_8 /* Port Size = 8 bit */ \ + | BR_MS_FCM /* MSEL = FCM */ \ + | BR_V) /* valid */ +#define CONFIG_SYS_OR6_PRELIM CONFIG_NAND_OR_PRELIM /* NAND Options */ /* Serial Port - controlled on board with jumper J8 diff --git a/include/configs/TASREG.h b/include/configs/TASREG.h index 18ffbfd72f..25f3a26f35 100644 --- a/include/configs/TASREG.h +++ b/include/configs/TASREG.h @@ -206,7 +206,7 @@ */ #define CONFIG_SYS_SDRAM_BASE 0x00000000 #define CONFIG_SYS_SDRAM_SIZE 16 /* SDRAM size in MB */ -#define CONFIG_SYS_FLASH_BASE 0xffc00000 +#define CONFIG_SYS_FLASH_BASE CONFIG_SYS_CS0_BASE #if 0 /* test-only */ #define CONFIG_PRAM 512 /* test-only for SDRAM problem!!!!!!!!!!!!!!!!!!!! */ @@ -257,15 +257,15 @@ */ /* CS0 - AMD Flash, address 0xffc00000 */ -#define CONFIG_SYS_CSAR0 0xffc0 -#define CONFIG_SYS_CSCR0 0x1980 /* WS=0110, AA=1, PS=10 */ +#define CONFIG_SYS_CS0_BASE 0xffc00000 +#define CONFIG_SYS_CS0_CTRL 0x00001980 /* WS=0110, AA=1, PS=10 */ /** Note: There is a CSMR0/DRAM vector problem, need to disable C/I ***/ -#define CONFIG_SYS_CSMR0 0x003f0021 /* 4MB, AA=0, WP=0, C/I=1, V=1 */ +#define CONFIG_SYS_CS0_MASK 0x003f0021 /* 4MB, AA=0, WP=0, C/I=1, V=1 */ /* CS1 - FPGA, address 0xe0000000 */ -#define CONFIG_SYS_CSAR1 0xe000 -#define CONFIG_SYS_CSCR1 0x0d80 /* WS=0011, AA=1, PS=10 */ -#define CONFIG_SYS_CSMR1 0x00010001 /* 128kB, AA=0, WP=0, C/I=0, V=1*/ +#define CONFIG_SYS_CS1_BASE 0xe0000000 +#define CONFIG_SYS_CS1_CTRL 0x00000d80 /* WS=0011, AA=1, PS=10 */ +#define CONFIG_SYS_CS1_MASK 0x00010001 /* 128kB, AA=0, WP=0, C/I=0, V=1*/ /*----------------------------------------------------------------------- * Port configuration diff --git a/include/configs/TQM8260.h b/include/configs/TQM8260.h index 533c7adb3d..ac9c94e689 100644 --- a/include/configs/TQM8260.h +++ b/include/configs/TQM8260.h @@ -300,6 +300,13 @@ #define CONFIG_SYS_FLASH_ERASE_TOUT 240000 /* Flash Erase Timeout (in ms) */ #define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (in ms) */ +/* use CFI flash driver */ +#define CONFIG_SYS_FLASH_CFI 1 /* Flash is CFI conformant */ +#define CONFIG_FLASH_CFI_DRIVER 1 /* Use the common driver */ +#define CONFIG_SYS_FLASH_BANKS_LIST { CONFIG_SYS_FLASH_BASE } +#define CONFIG_SYS_FLASH_EMPTY_INFO 1 +#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 1 + #define CONFIG_ENV_IS_IN_FLASH 1 #define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + 0x40000) #define CONFIG_ENV_SIZE 0x08000 diff --git a/include/configs/afeb9260.h b/include/configs/afeb9260.h new file mode 100644 index 0000000000..755952fe21 --- /dev/null +++ b/include/configs/afeb9260.h @@ -0,0 +1,169 @@ +/* + * (C) Copyright 2008 Sergey Lapin <slapin@ossfans.org> + * + * Configuation settings for the AFEB9260 board. + * Based on configuration for AT91SAM9260-EK + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __CONFIG_H +#define __CONFIG_H + +/* ARM asynchronous clock */ +#define AT91_MAIN_CLOCK 18429952 /* from 18.432 MHz crystal */ +#define AT91_MASTER_CLOCK 89999598 /* peripheral = main / 2 */ +#define CONFIG_SYS_HZ 1000000 /* 1us resolution */ + +#define AT91_SLOW_CLOCK 32768 /* slow clock */ + +#define CONFIG_AT91SAM9260 1 /* It's an Atmel AT91SAM9260 SoC*/ +#define CONFIG_AFEB9260 1 /* on an AFEB9260 Board */ +#undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */ + +#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */ +#define CONFIG_SETUP_MEMORY_TAGS 1 +#define CONFIG_INITRD_TAG 1 + +#define CONFIG_SKIP_LOWLEVEL_INIT +#define CONFIG_SKIP_RELOCATE_UBOOT + +/* + * Hardware drivers + */ +#define CONFIG_ATMEL_USART 1 +#undef CONFIG_USART0 +#undef CONFIG_USART1 +#undef CONFIG_USART2 +#define CONFIG_USART3 1 /* USART 3 is DBGU */ + +#define CONFIG_BOOTDELAY 3 + +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE 1 +#define CONFIG_BOOTP_BOOTPATH 1 +#define CONFIG_BOOTP_GATEWAY 1 +#define CONFIG_BOOTP_HOSTNAME 1 + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> +#undef CONFIG_CMD_BDI +#undef CONFIG_CMD_IMI +#undef CONFIG_CMD_AUTOSCRIPT +#undef CONFIG_CMD_FPGA +#undef CONFIG_CMD_LOADS +#undef CONFIG_CMD_IMLS + +#define CONFIG_CMD_PING 1 +#define CONFIG_CMD_DHCP 1 + +#define CONFIG_CMD_NAND 1 +#define CONFIG_CMD_USB 1 + +/* SDRAM */ +#define CONFIG_NR_DRAM_BANKS 1 +#define PHYS_SDRAM 0x20000000 +#define PHYS_SDRAM_SIZE 0x04000000 /* 64 megs */ + +/* DataFlash */ +#define CONFIG_HAS_DATAFLASH 1 +#define CONFIG_SYS_SPI_WRITE_TOUT (5 * CONFIG_SYS_HZ) +#define CONFIG_SYS_MAX_DATAFLASH_BANKS 2 +#define CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0 0xC0000000 /* CS0 */ +#define CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS1 0xD0000000 /* CS1 */ +#define AT91_SPI_CLK 15000000 +#define DATAFLASH_TCSS (0x1a << 16) +#define DATAFLASH_TCHS (0x1 << 24) + +/* NAND flash */ +#define NAND_MAX_CHIPS 1 +#define CONFIG_SYS_MAX_NAND_DEVICE 1 +#define CONFIG_SYS_NAND_BASE 0x40000000 +#define CONFIG_SYS_NAND_DBW_8 1 + +/* NOR flash - no real flash on this board */ +#define CONFIG_SYS_NO_FLASH 1 + +/* Ethernet */ +#define CONFIG_MACB 1 +#undef CONFIG_RMII /* We have full MII there */ +#define CONFIG_RESET_PHY_R 1 + +#define CONFIG_NET_MULTI 1 +#define CONFIG_NET_RETRY_COUNT 20 + +/* USB */ +#define CONFIG_USB_OHCI_NEW 1 +#define LITTLEENDIAN 1 +#define CONFIG_DOS_PARTITION 1 +#define CONFIG_SYS_USB_OHCI_CPU_INIT 1 +#define CONFIG_SYS_USB_OHCI_REGS_BASE 0x00500000 /* AT91SAM9260_UHP_BASE */ +#define CONFIG_SYS_USB_OHCI_SLOT_NAME "at91sam9260" +#define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 1 +#define CONFIG_USB_STORAGE 1 + +#define CONFIG_SYS_LOAD_ADDR 0x21000000 /* load address */ + +#define CONFIG_SYS_MEMTEST_START PHYS_SDRAM +#define CONFIG_SYS_MEMTEST_END 0x21e00000 + +#undef CONFIG_SYS_USE_DATAFLASH_CS0 +#define CONFIG_SYS_USE_DATAFLASH_CS1 1 +#undef CONFIG_SYS_USE_NANDFLASH + +/* bootstrap + u-boot + env + linux in dataflash on CS1 */ +#define CONFIG_ENV_IS_IN_DATAFLASH 1 +#define CONFIG_SYS_MONITOR_BASE (CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS1 + 0x8400) +#define CONFIG_ENV_OFFSET 0x4200 +#define CONFIG_ENV_ADDR (CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS1 + CONFIG_ENV_OFFSET) +#define CONFIG_ENV_SIZE 0x4200 +#define CONFIG_BOOTCOMMAND "nand read 0x21000000 0xa0000 0x200000; bootm" +#define CONFIG_BOOTARGS "console=ttyS0,115200 " \ + "root=/dev/mtdblock2 " \ + "rw rootfstype=jffs2 panic=20" + +#define CONFIG_BAUDRATE 115200 +#define CONFIG_SYS_BAUDRATE_TABLE {115200 , 19200, 38400, 57600, 9600 } + +#define CONFIG_SYS_PROMPT "U-Boot> " +#define CONFIG_SYS_CBSIZE 256 +#define CONFIG_SYS_MAXARGS 16 +#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) +#define CFG_LONGHELP 1 +#define CONFIG_CMDLINE_EDITING 1 + +#define ROUND(A, B) (((A) + (B)) & ~((B) - 1)) +/* + * Size of malloc() pool + */ +#define CONFIG_SYS_MALLOC_LEN ROUND(3 * CONFIG_ENV_SIZE + 128*1024, 0x1000) +#define CONFIG_SYS_GBL_DATA_SIZE 128 /* 128 bytes for initial data */ + +#define CONFIG_STACKSIZE (32 * 1024) /* regular stack */ + +#ifdef CONFIG_USE_IRQ +#error CONFIG_USE_IRQ not supported +#endif + +#endif + diff --git a/include/configs/fx12mm.h b/include/configs/fx12mm.h index 8481c33b9f..58445674c3 100644 --- a/include/configs/fx12mm.h +++ b/include/configs/fx12mm.h @@ -25,11 +25,10 @@ * MA 02111-1307 USA */ - /* - Configuration file for the Virtex4FX12 Minimodul by Avnet/Memec, - see http://www.em.avnet.com -*/ + * Configuration file for the Virtex4FX12 Minimodul by Avnet/Memec, + * see http://www.em.avnet.com + */ #ifndef __CONFIG_FX12_H #define __CONFIG_FX12_H @@ -54,7 +53,7 @@ /*Misc*/ #define CONFIG_SYS_PROMPT "FX12MM:/# " /* Monitor Command Prompt */ -#define CONFIG_PREBOOT "echo U-Boot is up and runnining;" +#define CONFIG_PREBOOT "echo U-Boot is up and running;" /*Flash*/ #define CONFIG_SYS_FLASH_SIZE (4*1024*1024) @@ -62,8 +61,6 @@ #define MTDIDS_DEFAULT "nor0=fx12mm-flash" #define MTDPARTS_DEFAULT "mtdparts=fx12mm-flash:-(user)" - #include "configs/xilinx-ppc405.h" -#endif /* __CONFIG_H */ - +#endif /* __CONFIG_H */ diff --git a/include/configs/mgsuvd.h b/include/configs/mgsuvd.h index ff52f8449f..fca2e55134 100644 --- a/include/configs/mgsuvd.h +++ b/include/configs/mgsuvd.h @@ -329,9 +329,6 @@ #define CONFIG_OF_LIBFDT 1 #define CONFIG_OF_BOARD_SETUP 1 -#define OF_CPU "PowerPC,866@0" -#define OF_SOC "soc@fff00000" -#define OF_TBCLK (bd->bi_busfreq / 4) #define OF_STDOUT_PATH "/soc/cpm/serial@a80" /* enable I2C and select the hardware/software driver */ diff --git a/include/usbdcore.h b/include/usbdcore.h index cb2be72804..206dbbc864 100644 --- a/include/usbdcore.h +++ b/include/usbdcore.h @@ -126,14 +126,6 @@ }) #endif -#ifndef MIN -#define MIN(a,b) ((a) < (b) ? (a) : (b)) -#endif -#ifndef MAX -#define MAX(a,b) ((a) > (b) ? (a) : (b)) -#endif - - /* * Structure member address manipulation macros. * These are used by client code (code using the urb_link routines), since diff --git a/lib_ppc/bootm.c b/lib_ppc/bootm.c index fce4effe85..e03d763907 100644 --- a/lib_ppc/bootm.c +++ b/lib_ppc/bootm.c @@ -173,7 +173,7 @@ static void boot_prep_linux(void) #if (CONFIG_NUM_CPUS > 1) /* if we are MP make sure to flush the dcache() to any changes are made * visibile to all other cores */ - flush_dcache(); + flush_dcache(); #endif return ; } @@ -224,12 +224,13 @@ static int boot_bd_t_linux(bootm_headers_t *images) static int boot_body_linux(bootm_headers_t *images) { - ulong rd_len, bootmap_base = getenv_bootm_low(); - ulong of_size = images->ft_len; + ulong rd_len; struct lmb *lmb = &images->lmb; ulong *initrd_start = &images->initrd_start; ulong *initrd_end = &images->initrd_end; #if defined(CONFIG_OF_LIBFDT) + ulong bootmap_base = getenv_bootm_low(); + ulong of_size = images->ft_len; char **of_flat_tree = &images->ft_addr; #endif |
