1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
|
* Allwinner A10 I2S controller
The I2S bus (Inter-IC sound bus) is a serial link for digital
audio data transfer between devices in the system.
Required properties:
- compatible: should be one of the following:
- "allwinner,sun4i-a10-i2s"
- "allwinner,sun6i-a31-i2s"
- "allwinner,sun8i-a83t-i2s"
- "allwinner,sun8i-h3-i2s"
- reg: physical base address of the controller and length of memory mapped
region.
- interrupts: should contain the I2S interrupt.
- dmas: DMA specifiers for tx and rx dma. See the DMA client binding,
Documentation/devicetree/bindings/dma/dma.txt
- dma-names: should include "tx" and "rx".
- clocks: a list of phandle + clock-specifer pairs, one for each entry in clock-names.
- clock-names: should contain the following:
- "apb" : clock for the I2S bus interface
- "mod" : module clock for the I2S controller
- #sound-dai-cells : Must be equal to 0
Required properties for the following compatibles:
- "allwinner,sun6i-a31-i2s"
- "allwinner,sun8i-a83t-i2s"
- "allwinner,sun8i-h3-i2s"
- resets: phandle to the reset line for this codec
Example:
i2s0: i2s@1c22400 {
#sound-dai-cells = <0>;
compatible = "allwinner,sun4i-a10-i2s";
reg = <0x01c22400 0x400>;
interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&apb0_gates 3>, <&i2s0_clk>;
clock-names = "apb", "mod";
dmas = <&dma SUN4I_DMA_NORMAL 3>,
<&dma SUN4I_DMA_NORMAL 3>;
dma-names = "rx", "tx";
};
|
