summaryrefslogtreecommitdiffstats
path: root/Documentation/devicetree/bindings/display/msm/dsi.txt
blob: 6b1cab17f52d0549ea8a3e3cbef460e6c3367cbf (plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
Qualcomm Technologies Inc. adreno/snapdragon DSI output

DSI Controller:
Required properties:
- compatible:
  * "qcom,mdss-dsi-ctrl"
- reg: Physical base address and length of the registers of controller
- reg-names: The names of register regions. The following regions are required:
  * "dsi_ctrl"
- qcom,dsi-host-index: The ID of DSI controller hardware instance. This should
  be 0 or 1, since we have 2 DSI controllers at most for now.
- interrupts: The interrupt signal from the DSI block.
- power-domains: Should be <&mmcc MDSS_GDSC>.
- clocks: Phandles to device clocks.
- clock-names: the following clocks are required:
  * "mdp_core_clk"
  * "iface_clk"
  * "bus_clk"
  * "core_mmss_clk"
  * "byte_clk"
  * "pixel_clk"
  * "core_clk"
  For DSIv2, we need an additional clock:
   * "src_clk"
- assigned-clocks: Parents of "byte_clk" and "pixel_clk" for the given platform.
- assigned-clock-parents: The Byte clock and Pixel clock PLL outputs provided
  by a DSI PHY block. See [1] for details on clock bindings.
- vdd-supply: phandle to vdd regulator device node
- vddio-supply: phandle to vdd-io regulator device node
- vdda-supply: phandle to vdda regulator device node
- phys: phandle to DSI PHY device node
- phy-names: the name of the corresponding PHY device
- syscon-sfpb: A phandle to mmss_sfpb syscon node (only for DSIv2)
- ports: Contains 2 DSI controller ports as child nodes. Each port contains
  an endpoint subnode as defined in [2] and [3].

Optional properties:
- panel@0: Node of panel connected to this DSI controller.
  See files in [4] for each supported panel.
- qcom,dual-dsi-mode: Boolean value indicating if the DSI controller is
  driving a panel which needs 2 DSI links.
- qcom,master-dsi: Boolean value indicating if the DSI controller is driving
  the master link of the 2-DSI panel.
- qcom,sync-dual-dsi: Boolean value indicating if the DSI controller is
  driving a 2-DSI panel whose 2 links need receive command simultaneously.
- interrupt-parent: phandle to the MDP block if the interrupt signal is routed
  through MDP block
- pinctrl-names: the pin control state names; should contain "default"
- pinctrl-0: the default pinctrl state (active)
- pinctrl-n: the "sleep" pinctrl state
- ports: contains DSI controller input and output ports as children, each
  containing one endpoint subnode.

  DSI Endpoint properties:
  - remote-endpoint: For port@0, set to phandle of the connected panel/bridge's
    input endpoint. For port@1, set to the MDP interface output. See [2] for
    device graph info.

  - data-lanes: this describes how the physical DSI data lanes are mapped
    to the logical lanes on the given platform. The value contained in
    index n describes what physical lane is mapped to the logical lane n
    (DATAn, where n lies between 0 and 3). The clock lane position is fixed
    and can't be changed. Hence, they aren't a part of the DT bindings. See
    [3] for more info on the data-lanes property.

    For example:

    data-lanes = <3 0 1 2>;

    The above mapping describes that the logical data lane DATA0 is mapped to
    the physical data lane DATA3, logical DATA1 to physical DATA0, logic DATA2
    to phys DATA1 and logic DATA3 to phys DATA2.

    There are only a limited number of physical to logical mappings possible:
    <0 1 2 3>
    <1 2 3 0>
    <2 3 0 1>
    <3 0 1 2>
    <0 3 2 1>
    <1 0 3 2>
    <2 1 0 3>
    <3 2 1 0>

DSI PHY:
Required properties:
- compatible: Could be the following
  * "qcom,dsi-phy-28nm-hpm"
  * "qcom,dsi-phy-28nm-lp"
  * "qcom,dsi-phy-20nm"
  * "qcom,dsi-phy-28nm-8960"
- reg: Physical base address and length of the registers of PLL, PHY and PHY
  regulator
- reg-names: The names of register regions. The following regions are required:
  * "dsi_pll"
  * "dsi_phy"
  * "dsi_phy_regulator"
- clock-cells: Must be 1. The DSI PHY block acts as a clock provider, creating
  2 clocks: A byte clock (index 0), and a pixel clock (index 1).
- qcom,dsi-phy-index: The ID of DSI PHY hardware instance. This should
  be 0 or 1, since we have 2 DSI PHYs at most for now.
- power-domains: Should be <&mmcc MDSS_GDSC>.
- clocks: Phandles to device clocks. See [1] for details on clock bindings.
- clock-names: the following clocks are required:
  * "iface_clk"
- vddio-supply: phandle to vdd-io regulator device node

Optional properties:
- qcom,dsi-phy-regulator-ldo-mode: Boolean value indicating if the LDO mode PHY
  regulator is wanted.

[1] Documentation/devicetree/bindings/clocks/clock-bindings.txt
[2] Documentation/devicetree/bindings/graph.txt
[3] Documentation/devicetree/bindings/media/video-interfaces.txt
[4] Documentation/devicetree/bindings/display/panel/

Example:
	dsi0: dsi@fd922800 {
		compatible = "qcom,mdss-dsi-ctrl";
		qcom,dsi-host-index = <0>;
		interrupt-parent = <&mdp>;
		interrupts = <4 0>;
		reg-names = "dsi_ctrl";
		reg = <0xfd922800 0x200>;
		power-domains = <&mmcc MDSS_GDSC>;
		clock-names =
			"bus_clk",
			"byte_clk",
			"core_clk",
			"core_mmss_clk",
			"iface_clk",
			"mdp_core_clk",
			"pixel_clk";
		clocks =
			<&mmcc MDSS_AXI_CLK>,
			<&mmcc MDSS_BYTE0_CLK>,
			<&mmcc MDSS_ESC0_CLK>,
			<&mmcc MMSS_MISC_AHB_CLK>,
			<&mmcc MDSS_AHB_CLK>,
			<&mmcc MDSS_MDP_CLK>,
			<&mmcc MDSS_PCLK0_CLK>;

		assigned-clocks =
				 <&mmcc BYTE0_CLK_SRC>,
				 <&mmcc PCLK0_CLK_SRC>;
		assigned-clock-parents =
				 <&dsi_phy0 0>,
				 <&dsi_phy0 1>;

		vdda-supply = <&pma8084_l2>;
		vdd-supply = <&pma8084_l22>;
		vddio-supply = <&pma8084_l12>;

		phys = <&dsi_phy0>;
		phy-names ="dsi-phy";

		qcom,dual-dsi-mode;
		qcom,master-dsi;
		qcom,sync-dual-dsi;

		pinctrl-names = "default", "sleep";
		pinctrl-0 = <&dsi_active>;
		pinctrl-1 = <&dsi_suspend>;

		ports {
			#address-cells = <1>;
			#size-cells = <0>;

			port@0 {
				reg = <0>;
				dsi0_in: endpoint {
					remote-endpoint = <&mdp_intf1_out>;
				};
			};

			port@1 {
				reg = <1>;
				dsi0_out: endpoint {
					remote-endpoint = <&panel_in>;
					data-lanes = <0 1 2 3>;
				};
			};
		};

		panel: panel@0 {
			compatible = "sharp,lq101r1sx01";
			reg = <0>;
			link2 = <&secondary>;

			power-supply = <...>;
			backlight = <...>;

			port {
				panel_in: endpoint {
					remote-endpoint = <&dsi0_out>;
				};
			};
		};
	};

	dsi_phy0: dsi-phy@fd922a00 {
		compatible = "qcom,dsi-phy-28nm-hpm";
		qcom,dsi-phy-index = <0>;
		reg-names =
			"dsi_pll",
			"dsi_phy",
			"dsi_phy_regulator";
		reg =   <0xfd922a00 0xd4>,
			<0xfd922b00 0x2b0>,
			<0xfd922d80 0x7b>;
		clock-names = "iface_clk";
		clocks = <&mmcc MDSS_AHB_CLK>;
		#clock-cells = <1>;
		vddio-supply = <&pma8084_l12>;

		qcom,dsi-phy-regulator-ldo-mode;
	};
OpenPOWER on IntegriCloud