/* * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program. If not, see . */ #include #include #include #include #include #include #include "vgic.h" void vgic_v3_process_maintenance(struct kvm_vcpu *vcpu) { struct vgic_v3_cpu_if *cpuif = &vcpu->arch.vgic_cpu.vgic_v3; u32 model = vcpu->kvm->arch.vgic.vgic_model; if (cpuif->vgic_misr & ICH_MISR_EOI) { unsigned long eisr_bmap = cpuif->vgic_eisr; int lr; for_each_set_bit(lr, &eisr_bmap, kvm_vgic_global_state.nr_lr) { u32 intid; u64 val = cpuif->vgic_lr[lr]; if (model == KVM_DEV_TYPE_ARM_VGIC_V3) intid = val & ICH_LR_VIRTUAL_ID_MASK; else intid = val & GICH_LR_VIRTUALID; WARN_ON(cpuif->vgic_lr[lr] & ICH_LR_STATE); /* Only SPIs require notification */ if (vgic_valid_spi(vcpu->kvm, intid)) kvm_notify_acked_irq(vcpu->kvm, 0, intid - VGIC_NR_PRIVATE_IRQS); } /* * In the next iterations of the vcpu loop, if we sync * the vgic state after flushing it, but before * entering the guest (this happens for pending * signals and vmid rollovers), then make sure we * don't pick up any old maintenance interrupts here. */ cpuif->vgic_eisr = 0; } cpuif->vgic_hcr &= ~ICH_HCR_UIE; } void vgic_v3_set_underflow(struct kvm_vcpu *vcpu) { struct vgic_v3_cpu_if *cpuif = &vcpu->arch.vgic_cpu.vgic_v3; cpuif->vgic_hcr |= ICH_HCR_UIE; } void vgic_v3_fold_lr_state(struct kvm_vcpu *vcpu) { struct vgic_v3_cpu_if *cpuif = &vcpu->arch.vgic_cpu.vgic_v3; u32 model = vcpu->kvm->arch.vgic.vgic_model; int lr; for (lr = 0; lr < vcpu->arch.vgic_cpu.used_lrs; lr++) { u64 val = cpuif->vgic_lr[lr]; u32 intid; struct vgic_irq *irq; if (model == KVM_DEV_TYPE_ARM_VGIC_V3) intid = val & ICH_LR_VIRTUAL_ID_MASK; else intid = val & GICH_LR_VIRTUALID; irq = vgic_get_irq(vcpu->kvm, vcpu, intid); if (!irq) /* An LPI could have been unmapped. */ continue; spin_lock(&irq->irq_lock); /* Always preserve the active bit */ irq->active = !!(val & ICH_LR_ACTIVE_BIT); /* Edge is the only case where we preserve the pending bit */ if (irq->config == VGIC_CONFIG_EDGE && (val & ICH_LR_PENDING_BIT)) { irq->pending_latch = true; if (vgic_irq_is_sgi(intid) && model == KVM_DEV_TYPE_ARM_VGIC_V2) { u32 cpuid = val & GICH_LR_PHYSID_CPUID; cpuid >>= GICH_LR_PHYSID_CPUID_SHIFT; irq->source |= (1 << cpuid); } } /* * Clear soft pending state when level irqs have been acked. * Always regenerate the pending state. */ if (irq->config == VGIC_CONFIG_LEVEL) { if (!(val & ICH_LR_PENDING_BIT)) irq->pending_latch = false; } spin_unlock(&irq->irq_lock); vgic_put_irq(vcpu->kvm, irq); } } /* Requires the irq to be locked already */ void vgic_v3_populate_lr(struct kvm_vcpu *vcpu, struct vgic_irq *irq, int lr) { u32 model = vcpu->kvm->arch.vgic.vgic_model; u64 val = irq->intid; if (irq_is_pending(irq)) { val |= ICH_LR_PENDING_BIT; if (irq->config == VGIC_CONFIG_EDGE) irq->pending_latch = false; if (vgic_irq_is_sgi(irq->intid) && model == KVM_DEV_TYPE_ARM_VGIC_V2) { u32 src = ffs(irq->source); BUG_ON(!src); val |= (src - 1) << GICH_LR_PHYSID_CPUID_SHIFT; irq->source &= ~(1 << (src - 1)); if (irq->source) irq->pending_latch = true; } } if (irq->active) val |= ICH_LR_ACTIVE_BIT; if (irq->hw) { val |= ICH_LR_HW; val |= ((u64)irq->hwintid) << ICH_LR_PHYS_ID_SHIFT; } else { if (irq->config == VGIC_CONFIG_LEVEL) val |= ICH_LR_EOI; } /* * We currently only support Group1 interrupts, which is a * known defect. This needs to be addressed at some point. */ if (model == KVM_DEV_TYPE_ARM_VGIC_V3) val |= ICH_LR_GROUP; val |= (u64)irq->priority << ICH_LR_PRIORITY_SHIFT; vcpu->arch.vgic_cpu.vgic_v3.vgic_lr[lr] = val; } void vgic_v3_clear_lr(struct kvm_vcpu *vcpu, int lr) { vcpu->arch.vgic_cpu.vgic_v3.vgic_lr[lr] = 0; } void vgic_v3_set_vmcr(struct kvm_vcpu *vcpu, struct vgic_vmcr *vmcrp) { u32 vmcr; vmcr = (vmcrp->ctlr << ICH_VMCR_CTLR_SHIFT) & ICH_VMCR_CTLR_MASK; vmcr |= (vmcrp->abpr << ICH_VMCR_BPR1_SHIFT) & ICH_VMCR_BPR1_MASK; vmcr |= (vmcrp->bpr << ICH_VMCR_BPR0_SHIFT) & ICH_VMCR_BPR0_MASK; vmcr |= (vmcrp->pmr << ICH_VMCR_PMR_SHIFT) & ICH_VMCR_PMR_MASK; vcpu->arch.vgic_cpu.vgic_v3.vgic_vmcr = vmcr; } void vgic_v3_get_vmcr(struct kvm_vcpu *vcpu, struct vgic_vmcr *vmcrp) { u32 vmcr = vcpu->arch.vgic_cpu.vgic_v3.vgic_vmcr; vmcrp->ctlr = (vmcr & ICH_VMCR_CTLR_MASK) >> ICH_VMCR_CTLR_SHIFT; vmcrp->abpr = (vmcr & ICH_VMCR_BPR1_MASK) >> ICH_VMCR_BPR1_SHIFT; vmcrp->bpr = (vmcr & ICH_VMCR_BPR0_MASK) >> ICH_VMCR_BPR0_SHIFT; vmcrp->pmr = (vmcr & ICH_VMCR_PMR_MASK) >> ICH_VMCR_PMR_SHIFT; } #define INITIAL_PENDBASER_VALUE \ (GIC_BASER_CACHEABILITY(GICR_PENDBASER, INNER, RaWb) | \ GIC_BASER_CACHEABILITY(GICR_PENDBASER, OUTER, SameAsInner) | \ GIC_BASER_SHAREABILITY(GICR_PENDBASER, InnerShareable)) void vgic_v3_enable(struct kvm_vcpu *vcpu) { struct vgic_v3_cpu_if *vgic_v3 = &vcpu->arch.vgic_cpu.vgic_v3; /* * By forcing VMCR to zero, the GIC will restore the binary * points to their reset values. Anything else resets to zero * anyway. */ vgic_v3->vgic_vmcr = 0; vgic_v3->vgic_elrsr = ~0; /* * If we are emulating a GICv3, we do it in an non-GICv2-compatible * way, so we force SRE to 1 to demonstrate this to the guest. * This goes with the spec allowing the value to be RAO/WI. */ if (vcpu->kvm->arch.vgic.vgic_model == KVM_DEV_TYPE_ARM_VGIC_V3) { vgic_v3->vgic_sre = ICC_SRE_EL1_SRE; vcpu->arch.vgic_cpu.pendbaser = INITIAL_PENDBASER_VALUE; } else { vgic_v3->vgic_sre = 0; } /* Get the show on the road... */ vgic_v3->vgic_hcr = ICH_HCR_EN; } /* check for overlapping regions and for regions crossing the end of memory */ static bool vgic_v3_check_base(struct kvm *kvm) { struct vgic_dist *d = &kvm->arch.vgic; gpa_t redist_size = KVM_VGIC_V3_REDIST_SIZE; redist_size *= atomic_read(&kvm->online_vcpus); if (d->vgic_dist_base + KVM_VGIC_V3_DIST_SIZE < d->vgic_dist_base) return false; if (d->vgic_redist_base + redist_size < d->vgic_redist_base) return false; if (d->vgic_dist_base + KVM_VGIC_V3_DIST_SIZE <= d->vgic_redist_base) return true; if (d->vgic_redist_base + redist_size <= d->vgic_dist_base) return true; return false; } int vgic_v3_map_resources(struct kvm *kvm) { int ret = 0; struct vgic_dist *dist = &kvm->arch.vgic; if (vgic_ready(kvm)) goto out; if (IS_VGIC_ADDR_UNDEF(dist->vgic_dist_base) || IS_VGIC_ADDR_UNDEF(dist->vgic_redist_base)) { kvm_err("Need to set vgic distributor addresses first\n"); ret = -ENXIO; goto out; } if (!vgic_v3_check_base(kvm)) { kvm_err("VGIC redist and dist frames overlap\n"); ret = -EINVAL; goto out; } /* * For a VGICv3 we require the userland to explicitly initialize * the VGIC before we need to use it. */ if (!vgic_initialized(kvm)) { ret = -EBUSY; goto out; } ret = vgic_register_dist_iodev(kvm, dist->vgic_dist_base, VGIC_V3); if (ret) { kvm_err("Unable to register VGICv3 dist MMIO regions\n"); goto out; } ret = vgic_register_redist_iodevs(kvm, dist->vgic_redist_base); if (ret) { kvm_err("Unable to register VGICv3 redist MMIO regions\n"); goto out; } if (vgic_has_its(kvm)) { ret = vgic_register_its_iodevs(kvm); if (ret) { kvm_err("Unable to register VGIC ITS MMIO regions\n"); goto out; } } dist->ready = true; out: return ret; } /** * vgic_v3_probe - probe for a GICv3 compatible interrupt controller in DT * @node: pointer to the DT node * * Returns 0 if a GICv3 has been found, returns an error code otherwise */ int vgic_v3_probe(const struct gic_kvm_info *info) { u32 ich_vtr_el2 = kvm_call_hyp(__vgic_v3_get_ich_vtr_el2); int ret; /* * The ListRegs field is 5 bits, but there is a architectural * maximum of 16 list registers. Just ignore bit 4... */ kvm_vgic_global_state.nr_lr = (ich_vtr_el2 & 0xf) + 1; kvm_vgic_global_state.can_emulate_gicv2 = false; if (!info->vcpu.start) { kvm_info("GICv3: no GICV resource entry\n"); kvm_vgic_global_state.vcpu_base = 0; } else if (!PAGE_ALIGNED(info->vcpu.start)) { pr_warn("GICV physical address 0x%llx not page aligned\n", (unsigned long long)info->vcpu.start); kvm_vgic_global_state.vcpu_base = 0; } else if (!PAGE_ALIGNED(resource_size(&info->vcpu))) { pr_warn("GICV size 0x%llx not a multiple of page size 0x%lx\n", (unsigned long long)resource_size(&info->vcpu), PAGE_SIZE); kvm_vgic_global_state.vcpu_base = 0; } else { kvm_vgic_global_state.vcpu_base = info->vcpu.start; kvm_vgic_global_state.can_emulate_gicv2 = true; ret = kvm_register_vgic_device(KVM_DEV_TYPE_ARM_VGIC_V2); if (ret) { kvm_err("Cannot register GICv2 KVM device.\n"); return ret; } kvm_info("vgic-v2@%llx\n", info->vcpu.start); } ret = kvm_register_vgic_device(KVM_DEV_TYPE_ARM_VGIC_V3); if (ret) { kvm_err("Cannot register GICv3 KVM device.\n"); kvm_unregister_device_ops(KVM_DEV_TYPE_ARM_VGIC_V2); return ret; } if (kvm_vgic_global_state.vcpu_base == 0) kvm_info("disabling GICv2 emulation\n"); kvm_vgic_global_state.vctrl_base = NULL; kvm_vgic_global_state.type = VGIC_V3; kvm_vgic_global_state.max_gic_vcpus = VGIC_V3_MAX_CPUS; return 0; }