# # Misc strange devices # menuconfig MISC_DEVICES bool "Misc devices" default y ---help--- Say Y here to get to see options for device drivers from various different categories. This option alone does not add any kernel code. If you say N, all options in this submenu will be skipped and disabled. if MISC_DEVICES config AD525X_DPOT tristate "Analog Devices AD525x Digital Potentiometers" depends on I2C && SYSFS help If you say yes here, you get support for the Analog Devices AD5258, AD5259, AD5251, AD5252, AD5253, AD5254 and AD5255 digital potentiometer chips. See Documentation/misc-devices/ad525x_dpot.txt for the userspace interface. This driver can also be built as a module. If so, the module will be called ad525x_dpot. config ATMEL_PWM tristate "Atmel AT32/AT91 PWM support" depends on AVR32 || ARCH_AT91SAM9263 || ARCH_AT91SAM9RL || ARCH_AT91CAP9 help This option enables device driver support for the PWM channels on certain Atmel processors. Pulse Width Modulation is used for purposes including software controlled power-efficient backlights on LCD displays, motor control, and waveform generation. config ATMEL_TCLIB bool "Atmel AT32/AT91 Timer/Counter Library" depends on (AVR32 || ARCH_AT91) help Select this if you want a library to allocate the Timer/Counter blocks found on many Atmel processors. This facilitates using these blocks by different drivers despite processor differences. config ATMEL_TCB_CLKSRC bool "TC Block Clocksource" depends on ATMEL_TCLIB && GENERIC_TIME default y help Select this to get a high precision clocksource based on a TC block with a 5+ MHz base clock rate. Two timer channels are combined to make a single 32-bit timer. When GENERIC_CLOCKEVENTS is defined, the third timer channel may be used as a clock event device supporting oneshot mode (delays of up to two seconds) based on the 32 KiHz clock. config ATMEL_TCB_CLKSRC_BLOCK int depends on ATMEL_TCB_CLKSRC prompt "TC Block" if ARCH_AT91RM9200 || ARCH_AT91SAM9260 || CPU_AT32AP700X default 0 range 0 1 help Some chips provide more than one TC block, so you have the choice of which one to use for the clock framework. The other TC can be used for other purposes, such as PWM generation and interval timing. config IBM_ASM tristate "Device driver for IBM RSA service processor" depends on X86 && PCI && INPUT && EXPERIMENTAL ---help--- This option enables device driver support for in-band access to the IBM RSA (Condor) service processor in eServer xSeries systems. The ibmasm device driver allows user space application to access ASM (Advanced Systems Management) functions on the service processor. The driver is meant to be used in conjunction with a user space API. The ibmasm driver also enables the OS to use the UART on the service processor board as a regular serial port. To make use of this feature serial driver support (CONFIG_SERIAL_8250) must be enabled. WARNING: This software may not be supported or function correctly on your IBM server. Please consult the IBM ServerProven website for information on the specific driver level and support statement for your IBM server. config PHANTOM tristate "Sensable PHANToM (PCI)" depends on PCI help Say Y here if you want to build a driver for Sensable PHANToM device. This driver is only for PCI PHANToMs. If you choose to build module, its name will be phantom. If unsure, say N here. config SGI_IOC4 tristate "SGI IOC4 Base IO support" depends on PCI ---help--- This option enables basic support for the IOC4 chip on certain SGI IO controller cards (IO9, IO10, and PCI-RT). This option does not enable any specific functions on such a card, but provides necessary infrastructure for other drivers to utilize. If you have an SGI Altix with an IOC4-based card say Y. Otherwise say N. config TIFM_CORE tristate "TI Flash Media interface support (EXPERIMENTAL)" depends on EXPERIMENTAL && PCI help If you want support for Texas Instruments(R) Flash Media adapters you should select this option and then also choose an appropriate host adapter, such as 'TI Flash Media PCI74xx/PCI76xx host adapter support', if you have a TI PCI74xx compatible card reader, for example. You will also have to select some flash card format drivers. MMC/SD cards are supported via 'MMC/SD Card support: TI Flash Media MMC/SD Interface support (MMC_TIFM_SD)'. To compile this driver as a module, choose M here: the module will be called tifm_core. config TIFM_7XX1 tristate "TI Flash Media PCI74xx/PCI76xx host adapter support (EXPERIMENTAL)" depends on PCI && TIFM_CORE && EXPERIMENTAL default TIFM_CORE help This option enables support for Texas Instruments(R) PCI74xx and PCI76xx families of Flash Media adapters, found in many laptops. To make actual use of the device, you will have to select some flash card format drivers, as outlined in the TIFM_CORE Help. To compile this driver as a module, choose M here: the module will be called tifm_7xx1. config ICS932S401 tristate "Integrated Circuits ICS932S401" depends on I2C && EXPERIMENTAL help If you say yes here you get support for the Integrated Circuits ICS932S401 clock control chips. This driver can also be built as a module. If so, the module will be called ics932s401. config ATMEL_SSC tristate "Device driver for Atmel SSC peripheral" depends on AVR32 || ARCH_AT91 ---help--- This option enables device driver support for Atmel Synchronized Serial Communication peripheral (SSC). The SSC peripheral supports a wide variety of serial frame based communications, i.e. I2S, SPI, etc. If unsure, say N. config ENCLOSURE_SERVICES tristate "Enclosure Services" default n help Provides support for intelligent enclosures (bays which contain storage devices). You also need either a host driver (SCSI/ATA) which supports enclosures or a SCSI enclosure device (SES) to use these services. config SGI_XP tristate "Support communication between SGI SSIs" depends on NET depends on (IA64_GENERIC || IA64_SGI_SN2 || IA64_SGI_UV || X86_UV) && SMP select IA64_UNCACHED_ALLOCATOR if IA64_GENERIC || IA64_SGI_SN2 select GENERIC_ALLOCATOR if IA64_GENERIC || IA64_SGI_SN2 select SGI_GRU if X86_64 && SMP ---help--- An SGI machine can be divided into multiple Single System Images which act independently of each other and have hardware based memory protection from the others. Enabling this feature will allow for direct communication between SSIs based on a network adapter and DMA messaging. config HP_ILO tristate "Channel interface driver for HP iLO/iLO2 processor" depends on PCI default n help The channel interface driver allows applications to communicate with iLO/iLO2 management processors present on HP ProLiant servers. Upon loading, the driver creates /dev/hpilo/dXccbN files, which can be used to gather data from the management processor, via read and write system calls. To compile this driver as a module, choose M here: the module will be called hpilo. config SGI_GRU tristate "SGI GRU driver" depends on X86_UV && SMP default n select MMU_NOTIFIER ---help--- The GRU is a hardware resource located in the system chipset. The GRU contains memory that can be mmapped into the user address space. This memory is used to communicate with the GRU to perform functions such as load/store, scatter/gather, bcopy, AMOs, etc. The GRU is directly accessed by user instructions using user virtual addresses. GRU instructions (ex., bcopy) use user virtual addresses for operands. If you are not running on a SGI UV system, say N. config SGI_GRU_DEBUG bool "SGI GRU driver debug" depends on SGI_GRU default n ---help--- This option enables addition debugging code for the SGI GRU driver. If you are unsure, say N. config DELL_LAPTOP tristate "Dell Laptop Extras (EXPERIMENTAL)" depends on X86 depends on DCDBAS depends on EXPERIMENTAL depends on BACKLIGHT_CLASS_DEVICE depends on RFKILL depends on POWER_SUPPLY default n ---help--- This driver adds support for rfkill and backlight control to Dell laptops. config ISL29003 tristate "Intersil ISL29003 ambient light sensor" depends on I2C && SYSFS help If you say yes here you get support for the Intersil ISL29003 ambient light sensor. This driver can also be built as a module. If so, the module will be called isl29003. config EP93XX_PWM tristate "EP93xx PWM support" depends on ARCH_EP93XX help This option enables device driver support for the PWM channels on the Cirrus EP93xx processors. The EP9307 chip only has one PWM channel all the others have two, the second channel is an alternate function of the EGPIO14 pin. A sysfs interface is provided to control the PWM channels. To compile this driver as a module, choose M here: the module will be called ep93xx_pwm. config DS1682 tristate "Dallas DS1682 Total Elapsed Time Recorder with Alarm" depends on I2C && EXPERIMENTAL help If you say yes here you get support for Dallas Semiconductor DS1682 Total Elapsed Time Recorder. This driver can also be built as a module. If so, the module will be called ds1682. config TI_DAC7512 tristate "Texas Instruments DAC7512" depends on SPI && SYSFS help If you say yes here you get support for the Texas Instruments DAC7512 16-bit digital-to-analog converter. This driver can also be built as a module. If so, the module will be calles ti_dac7512. source "drivers/misc/c2port/Kconfig" source "drivers/misc/eeprom/Kconfig" source "drivers/misc/cb710/Kconfig" source "drivers/misc/iwmc3200top/Kconfig" endif # MISC_DEVICES