/* ------------------------------------------------------------------------- * Copyright (C) 2014-2015, Intel Corporation * * Derived from: * gslX68X.c * Copyright (C) 2010-2015, Shanghai Sileadinc Co.Ltd * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 2 of the License, or * (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * ------------------------------------------------------------------------- */ #include #include #include #include #include #include #include #include #include #include #include #include #include #include #define SILEAD_TS_NAME "silead_ts" #define SILEAD_REG_RESET 0xE0 #define SILEAD_REG_DATA 0x80 #define SILEAD_REG_TOUCH_NR 0x80 #define SILEAD_REG_POWER 0xBC #define SILEAD_REG_CLOCK 0xE4 #define SILEAD_REG_STATUS 0xB0 #define SILEAD_REG_ID 0xFC #define SILEAD_REG_MEM_CHECK 0xB0 #define SILEAD_STATUS_OK 0x5A5A5A5A #define SILEAD_TS_DATA_LEN 44 #define SILEAD_CLOCK 0x04 #define SILEAD_CMD_RESET 0x88 #define SILEAD_CMD_START 0x00 #define SILEAD_POINT_DATA_LEN 0x04 #define SILEAD_POINT_Y_OFF 0x00 #define SILEAD_POINT_Y_MSB_OFF 0x01 #define SILEAD_POINT_X_OFF 0x02 #define SILEAD_POINT_X_MSB_OFF 0x03 #define SILEAD_EXTRA_DATA_MASK 0xF0 #define SILEAD_CMD_SLEEP_MIN 10000 #define SILEAD_CMD_SLEEP_MAX 20000 #define SILEAD_POWER_SLEEP 20 #define SILEAD_STARTUP_SLEEP 30 #define SILEAD_MAX_FINGERS 10 enum silead_ts_power { SILEAD_POWER_ON = 1, SILEAD_POWER_OFF = 0 }; struct silead_ts_data { struct i2c_client *client; struct gpio_desc *gpio_power; struct input_dev *input; struct regulator_bulk_data regulators[2]; char fw_name[64]; struct touchscreen_properties prop; u32 max_fingers; u32 chip_id; struct input_mt_pos pos[SILEAD_MAX_FINGERS]; int slots[SILEAD_MAX_FINGERS]; int id[SILEAD_MAX_FINGERS]; }; struct silead_fw_data { u32 offset; u32 val; }; static int silead_ts_request_input_dev(struct silead_ts_data *data) { struct device *dev = &data->client->dev; int error; data->input = devm_input_allocate_device(dev); if (!data->input) { dev_err(dev, "Failed to allocate input device\n"); return -ENOMEM; } input_set_abs_params(data->input, ABS_MT_POSITION_X, 0, 4095, 0, 0); input_set_abs_params(data->input, ABS_MT_POSITION_Y, 0, 4095, 0, 0); touchscreen_parse_properties(data->input, true, &data->prop); input_mt_init_slots(data->input, data->max_fingers, INPUT_MT_DIRECT | INPUT_MT_DROP_UNUSED | INPUT_MT_TRACK); if (device_property_read_bool(dev, "silead,home-button")) input_set_capability(data->input, EV_KEY, KEY_LEFTMETA); data->input->name = SILEAD_TS_NAME; data->input->phys = "input/ts"; data->input->id.bustype = BUS_I2C; error = input_register_device(data->input); if (error) { dev_err(dev, "Failed to register input device: %d\n", error); return error; } return 0; } static void silead_ts_set_power(struct i2c_client *client, enum silead_ts_power state) { struct silead_ts_data *data = i2c_get_clientdata(client); if (data->gpio_power) { gpiod_set_value_cansleep(data->gpio_power, state); msleep(SILEAD_POWER_SLEEP); } } static void silead_ts_read_data(struct i2c_client *client) { struct silead_ts_data *data = i2c_get_clientdata(client); struct input_dev *input = data->input; struct device *dev = &client->dev; u8 *bufp, buf[SILEAD_TS_DATA_LEN]; int touch_nr, softbutton, error, i; bool softbutton_pressed = false; error = i2c_smbus_read_i2c_block_data(client, SILEAD_REG_DATA, SILEAD_TS_DATA_LEN, buf); if (error < 0) { dev_err(dev, "Data read error %d\n", error); return; } if (buf[0] > data->max_fingers) { dev_warn(dev, "More touches reported then supported %d > %d\n", buf[0], data->max_fingers); buf[0] = data->max_fingers; } touch_nr = 0; bufp = buf + SILEAD_POINT_DATA_LEN; for (i = 0; i < buf[0]; i++, bufp += SILEAD_POINT_DATA_LEN) { softbutton = (bufp[SILEAD_POINT_Y_MSB_OFF] & SILEAD_EXTRA_DATA_MASK) >> 4; if (softbutton) { /* * For now only respond to softbutton == 0x01, some * tablets *without* a capacative button send 0x04 * when crossing the edges of the screen. */ if (softbutton == 0x01) softbutton_pressed = true; continue; } /* * Bits 4-7 are the touch id, note not all models have * hardware touch ids so atm we don't use these. */ data->id[touch_nr] = (bufp[SILEAD_POINT_X_MSB_OFF] & SILEAD_EXTRA_DATA_MASK) >> 4; touchscreen_set_mt_pos(&data->pos[touch_nr], &data->prop, get_unaligned_le16(&bufp[SILEAD_POINT_X_OFF]) & 0xfff, get_unaligned_le16(&bufp[SILEAD_POINT_Y_OFF]) & 0xfff); touch_nr++; } input_mt_assign_slots(input, data->slots, data->pos, touch_nr, 0); for (i = 0; i < touch_nr; i++) { input_mt_slot(input, data->slots[i]); input_mt_report_slot_state(input, MT_TOOL_FINGER, true); input_report_abs(input, ABS_MT_POSITION_X, data->pos[i].x); input_report_abs(input, ABS_MT_POSITION_Y, data->pos[i].y); dev_dbg(dev, "x=%d y=%d hw_id=%d sw_id=%d\n", data->pos[i].x, data->pos[i].y, data->id[i], data->slots[i]); } input_mt_sync_frame(input); input_report_key(input, KEY_LEFTMETA, softbutton_pressed); input_sync(input); } static int silead_ts_init(struct i2c_client *client) { struct silead_ts_data *data = i2c_get_clientdata(client); int error; error = i2c_smbus_write_byte_data(client, SILEAD_REG_RESET, SILEAD_CMD_RESET); if (error) goto i2c_write_err; usleep_range(SILEAD_CMD_SLEEP_MIN, SILEAD_CMD_SLEEP_MAX); error = i2c_smbus_write_byte_data(client, SILEAD_REG_TOUCH_NR, data->max_fingers); if (error) goto i2c_write_err; usleep_range(SILEAD_CMD_SLEEP_MIN, SILEAD_CMD_SLEEP_MAX); error = i2c_smbus_write_byte_data(client, SILEAD_REG_CLOCK, SILEAD_CLOCK); if (error) goto i2c_write_err; usleep_range(SILEAD_CMD_SLEEP_MIN, SILEAD_CMD_SLEEP_MAX); error = i2c_smbus_write_byte_data(client, SILEAD_REG_RESET, SILEAD_CMD_START); if (error) goto i2c_write_err; usleep_range(SILEAD_CMD_SLEEP_MIN, SILEAD_CMD_SLEEP_MAX); return 0; i2c_write_err: dev_err(&client->dev, "Registers clear error %d\n", error); return error; } static int silead_ts_reset(struct i2c_client *client) { int error; error = i2c_smbus_write_byte_data(client, SILEAD_REG_RESET, SILEAD_CMD_RESET); if (error) goto i2c_write_err; usleep_range(SILEAD_CMD_SLEEP_MIN, SILEAD_CMD_SLEEP_MAX); error = i2c_smbus_write_byte_data(client, SILEAD_REG_CLOCK, SILEAD_CLOCK); if (error) goto i2c_write_err; usleep_range(SILEAD_CMD_SLEEP_MIN, SILEAD_CMD_SLEEP_MAX); error = i2c_smbus_write_byte_data(client, SILEAD_REG_POWER, SILEAD_CMD_START); if (error) goto i2c_write_err; usleep_range(SILEAD_CMD_SLEEP_MIN, SILEAD_CMD_SLEEP_MAX); return 0; i2c_write_err: dev_err(&client->dev, "Chip reset error %d\n", error); return error; } static int silead_ts_startup(struct i2c_client *client) { int error; error = i2c_smbus_write_byte_data(client, SILEAD_REG_RESET, 0x00); if (error) { dev_err(&client->dev, "Startup error %d\n", error); return error; } msleep(SILEAD_STARTUP_SLEEP); return 0; } static int silead_ts_load_fw(struct i2c_client *client) { struct device *dev = &client->dev; struct silead_ts_data *data = i2c_get_clientdata(client); unsigned int fw_size, i; const struct firmware *fw; struct silead_fw_data *fw_data; int error; dev_dbg(dev, "Firmware file name: %s", data->fw_name); error = request_firmware(&fw, data->fw_name, dev); if (error) { dev_err(dev, "Firmware request error %d\n", error); return error; } fw_size = fw->size / sizeof(*fw_data); fw_data = (struct silead_fw_data *)fw->data; for (i = 0; i < fw_size; i++) { error = i2c_smbus_write_i2c_block_data(client, fw_data[i].offset, 4, (u8 *)&fw_data[i].val); if (error) { dev_err(dev, "Firmware load error %d\n", error); break; } } release_firmware(fw); return error ?: 0; } static u32 silead_ts_get_status(struct i2c_client *client) { int error; __le32 status; error = i2c_smbus_read_i2c_block_data(client, SILEAD_REG_STATUS, sizeof(status), (u8 *)&status); if (error < 0) { dev_err(&client->dev, "Status read error %d\n", error); return error; } return le32_to_cpu(status); } static int silead_ts_get_id(struct i2c_client *client) { struct silead_ts_data *data = i2c_get_clientdata(client); __le32 chip_id; int error; error = i2c_smbus_read_i2c_block_data(client, SILEAD_REG_ID, sizeof(chip_id), (u8 *)&chip_id); if (error < 0) { dev_err(&client->dev, "Chip ID read error %d\n", error); return error; } data->chip_id = le32_to_cpu(chip_id); dev_info(&client->dev, "Silead chip ID: 0x%8X", data->chip_id); return 0; } static int silead_ts_setup(struct i2c_client *client) { int error; u32 status; silead_ts_set_power(client, SILEAD_POWER_OFF); silead_ts_set_power(client, SILEAD_POWER_ON); error = silead_ts_get_id(client); if (error) return error; error = silead_ts_init(client); if (error) return error; error = silead_ts_reset(client); if (error) return error; error = silead_ts_load_fw(client); if (error) return error; error = silead_ts_startup(client); if (error) return error; status = silead_ts_get_status(client); if (status != SILEAD_STATUS_OK) { dev_err(&client->dev, "Initialization error, status: 0x%X\n", status); return -ENODEV; } return 0; } static irqreturn_t silead_ts_threaded_irq_handler(int irq, void *id) { struct silead_ts_data *data = id; struct i2c_client *client = data->client; silead_ts_read_data(client); return IRQ_HANDLED; } static void silead_ts_read_props(struct i2c_client *client) { struct silead_ts_data *data = i2c_get_clientdata(client); struct device *dev = &client->dev; const char *str; int error; error = device_property_read_u32(dev, "silead,max-fingers", &data->max_fingers); if (error) { dev_dbg(dev, "Max fingers read error %d\n", error); data->max_fingers = 5; /* Most devices handle up-to 5 fingers */ } error = device_property_read_string(dev, "firmware-name", &str); if (!error) snprintf(data->fw_name, sizeof(data->fw_name), "silead/%s", str); else dev_dbg(dev, "Firmware file name read error. Using default."); } #ifdef CONFIG_ACPI static int silead_ts_set_default_fw_name(struct silead_ts_data *data, const struct i2c_device_id *id) { const struct acpi_device_id *acpi_id; struct device *dev = &data->client->dev; int i; if (ACPI_HANDLE(dev)) { acpi_id = acpi_match_device(dev->driver->acpi_match_table, dev); if (!acpi_id) return -ENODEV; snprintf(data->fw_name, sizeof(data->fw_name), "silead/%s.fw", acpi_id->id); for (i = 0; i < strlen(data->fw_name); i++) data->fw_name[i] = tolower(data->fw_name[i]); } else { snprintf(data->fw_name, sizeof(data->fw_name), "silead/%s.fw", id->name); } return 0; } #else static int silead_ts_set_default_fw_name(struct silead_ts_data *data, const struct i2c_device_id *id) { snprintf(data->fw_name, sizeof(data->fw_name), "silead/%s.fw", id->name); return 0; } #endif static void silead_disable_regulator(void *arg) { struct silead_ts_data *data = arg; regulator_bulk_disable(ARRAY_SIZE(data->regulators), data->regulators); } static int silead_ts_probe(struct i2c_client *client, const struct i2c_device_id *id) { struct silead_ts_data *data; struct device *dev = &client->dev; int error; if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C | I2C_FUNC_SMBUS_READ_I2C_BLOCK | I2C_FUNC_SMBUS_WRITE_I2C_BLOCK)) { dev_err(dev, "I2C functionality check failed\n"); return -ENXIO; } data = devm_kzalloc(dev, sizeof(*data), GFP_KERNEL); if (!data) return -ENOMEM; i2c_set_clientdata(client, data); data->client = client; error = silead_ts_set_default_fw_name(data, id); if (error) return error; silead_ts_read_props(client); /* We must have the IRQ provided by DT or ACPI subsytem */ if (client->irq <= 0) return -ENODEV; data->regulators[0].supply = "vddio"; data->regulators[1].supply = "avdd"; error = devm_regulator_bulk_get(dev, ARRAY_SIZE(data->regulators), data->regulators); if (error) return error; /* * Enable regulators at probe and disable them at remove, we need * to keep the chip powered otherwise it forgets its firmware. */ error = regulator_bulk_enable(ARRAY_SIZE(data->regulators), data->regulators); if (error) return error; error = devm_add_action_or_reset(dev, silead_disable_regulator, data); if (error) return error; /* Power GPIO pin */ data->gpio_power = devm_gpiod_get_optional(dev, "power", GPIOD_OUT_LOW); if (IS_ERR(data->gpio_power)) { if (PTR_ERR(data->gpio_power) != -EPROBE_DEFER) dev_err(dev, "Shutdown GPIO request failed\n"); return PTR_ERR(data->gpio_power); } error = silead_ts_setup(client); if (error) return error; error = silead_ts_request_input_dev(data); if (error) return error; error = devm_request_threaded_irq(dev, client->irq, NULL, silead_ts_threaded_irq_handler, IRQF_ONESHOT, client->name, data); if (error) { if (error != -EPROBE_DEFER) dev_err(dev, "IRQ request failed %d\n", error); return error; } return 0; } static int __maybe_unused silead_ts_suspend(struct device *dev) { struct i2c_client *client = to_i2c_client(dev); disable_irq(client->irq); silead_ts_set_power(client, SILEAD_POWER_OFF); return 0; } static int __maybe_unused silead_ts_resume(struct device *dev) { struct i2c_client *client = to_i2c_client(dev); bool second_try = false; int error, status; silead_ts_set_power(client, SILEAD_POWER_ON); retry: error = silead_ts_reset(client); if (error) return error; if (second_try) { error = silead_ts_load_fw(client); if (error) return error; } error = silead_ts_startup(client); if (error) return error; status = silead_ts_get_status(client); if (status != SILEAD_STATUS_OK) { if (!second_try) { second_try = true; dev_dbg(dev, "Reloading firmware after unsuccessful resume\n"); goto retry; } dev_err(dev, "Resume error, status: 0x%02x\n", status); return -ENODEV; } enable_irq(client->irq); return 0; } static SIMPLE_DEV_PM_OPS(silead_ts_pm, silead_ts_suspend, silead_ts_resume); static const struct i2c_device_id silead_ts_id[] = { { "gsl1680", 0 }, { "gsl1688", 0 }, { "gsl3670", 0 }, { "gsl3675", 0 }, { "gsl3692", 0 }, { "mssl1680", 0 }, { } }; MODULE_DEVICE_TABLE(i2c, silead_ts_id); #ifdef CONFIG_ACPI static const struct acpi_device_id silead_ts_acpi_match[] = { { "GSL1680", 0 }, { "GSL1688", 0 }, { "GSL3670", 0 }, { "GSL3675", 0 }, { "GSL3692", 0 }, { "MSSL1680", 0 }, { "MSSL0001", 0 }, { } }; MODULE_DEVICE_TABLE(acpi, silead_ts_acpi_match); #endif #ifdef CONFIG_OF static const struct of_device_id silead_ts_of_match[] = { { .compatible = "silead,gsl1680" }, { .compatible = "silead,gsl1688" }, { .compatible = "silead,gsl3670" }, { .compatible = "silead,gsl3675" }, { .compatible = "silead,gsl3692" }, { }, }; MODULE_DEVICE_TABLE(of, silead_ts_of_match); #endif static struct i2c_driver silead_ts_driver = { .probe = silead_ts_probe, .id_table = silead_ts_id, .driver = { .name = SILEAD_TS_NAME, .acpi_match_table = ACPI_PTR(silead_ts_acpi_match), .of_match_table = of_match_ptr(silead_ts_of_match), .pm = &silead_ts_pm, }, }; module_i2c_driver(silead_ts_driver); MODULE_AUTHOR("Robert Dolca "); MODULE_DESCRIPTION("Silead I2C touchscreen driver"); MODULE_LICENSE("GPL");