/* * OMAP3xxx PRM module functions * * Copyright (C) 2010-2012 Texas Instruments, Inc. * Copyright (C) 2010 Nokia Corporation * Benoît Cousson * Paul Walmsley * Rajendra Nayak * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. */ #include #include #include #include #include #include #include "soc.h" #include "common.h" #include "vp.h" #include "powerdomain.h" #include "prm3xxx.h" #include "prm2xxx_3xxx.h" #include "cm2xxx_3xxx.h" #include "prm-regbits-34xx.h" #include "cm3xxx.h" #include "cm-regbits-34xx.h" static const struct omap_prcm_irq omap3_prcm_irqs[] = { OMAP_PRCM_IRQ("wkup", 0, 0), OMAP_PRCM_IRQ("io", 9, 1), }; static struct omap_prcm_irq_setup omap3_prcm_irq_setup = { .ack = OMAP3_PRM_IRQSTATUS_MPU_OFFSET, .mask = OMAP3_PRM_IRQENABLE_MPU_OFFSET, .nr_regs = 1, .irqs = omap3_prcm_irqs, .nr_irqs = ARRAY_SIZE(omap3_prcm_irqs), .irq = 11 + OMAP_INTC_START, .read_pending_irqs = &omap3xxx_prm_read_pending_irqs, .ocp_barrier = &omap3xxx_prm_ocp_barrier, .save_and_clear_irqen = &omap3xxx_prm_save_and_clear_irqen, .restore_irqen = &omap3xxx_prm_restore_irqen, .reconfigure_io_chain = NULL, }; /* * omap3_prm_reset_src_map - map from bits in the PRM_RSTST hardware * register (which are specific to OMAP3xxx SoCs) to reset source ID * bit shifts (which is an OMAP SoC-independent enumeration) */ static struct prm_reset_src_map omap3xxx_prm_reset_src_map[] = { { OMAP3430_GLOBAL_COLD_RST_SHIFT, OMAP_GLOBAL_COLD_RST_SRC_ID_SHIFT }, { OMAP3430_GLOBAL_SW_RST_SHIFT, OMAP_GLOBAL_WARM_RST_SRC_ID_SHIFT }, { OMAP3430_SECURITY_VIOL_RST_SHIFT, OMAP_SECU_VIOL_RST_SRC_ID_SHIFT }, { OMAP3430_MPU_WD_RST_SHIFT, OMAP_MPU_WD_RST_SRC_ID_SHIFT }, { OMAP3430_SECURE_WD_RST_SHIFT, OMAP_MPU_WD_RST_SRC_ID_SHIFT }, { OMAP3430_EXTERNAL_WARM_RST_SHIFT, OMAP_EXTWARM_RST_SRC_ID_SHIFT }, { OMAP3430_VDD1_VOLTAGE_MANAGER_RST_SHIFT, OMAP_VDD_MPU_VM_RST_SRC_ID_SHIFT }, { OMAP3430_VDD2_VOLTAGE_MANAGER_RST_SHIFT, OMAP_VDD_CORE_VM_RST_SRC_ID_SHIFT }, { OMAP3430_ICEPICK_RST_SHIFT, OMAP_ICEPICK_RST_SRC_ID_SHIFT }, { OMAP3430_ICECRUSHER_RST_SHIFT, OMAP_ICECRUSHER_RST_SRC_ID_SHIFT }, { -1, -1 }, }; /* PRM VP */ /* * struct omap3_vp - OMAP3 VP register access description. * @tranxdone_status: VP_TRANXDONE_ST bitmask in PRM_IRQSTATUS_MPU reg */ struct omap3_vp { u32 tranxdone_status; }; static struct omap3_vp omap3_vp[] = { [OMAP3_VP_VDD_MPU_ID] = { .tranxdone_status = OMAP3430_VP1_TRANXDONE_ST_MASK, }, [OMAP3_VP_VDD_CORE_ID] = { .tranxdone_status = OMAP3430_VP2_TRANXDONE_ST_MASK, }, }; #define MAX_VP_ID ARRAY_SIZE(omap3_vp); u32 omap3_prm_vp_check_txdone(u8 vp_id) { struct omap3_vp *vp = &omap3_vp[vp_id]; u32 irqstatus; irqstatus = omap2_prm_read_mod_reg(OCP_MOD, OMAP3_PRM_IRQSTATUS_MPU_OFFSET); return irqstatus & vp->tranxdone_status; } void omap3_prm_vp_clear_txdone(u8 vp_id) { struct omap3_vp *vp = &omap3_vp[vp_id]; omap2_prm_write_mod_reg(vp->tranxdone_status, OCP_MOD, OMAP3_PRM_IRQSTATUS_MPU_OFFSET); } u32 omap3_prm_vcvp_read(u8 offset) { return omap2_prm_read_mod_reg(OMAP3430_GR_MOD, offset); } void omap3_prm_vcvp_write(u32 val, u8 offset) { omap2_prm_write_mod_reg(val, OMAP3430_GR_MOD, offset); } u32 omap3_prm_vcvp_rmw(u32 mask, u32 bits, u8 offset) { return omap2_prm_rmw_mod_reg_bits(mask, bits, OMAP3430_GR_MOD, offset); } /** * omap3xxx_prm_dpll3_reset - use DPLL3 reset to reboot the OMAP SoC * * Set the DPLL3 reset bit, which should reboot the SoC. This is the * recommended way to restart the SoC, considering Errata i520. No * return value. */ void omap3xxx_prm_dpll3_reset(void) { omap2_prm_set_mod_reg_bits(OMAP_RST_DPLL3_MASK, OMAP3430_GR_MOD, OMAP2_RM_RSTCTRL); /* OCP barrier */ omap2_prm_read_mod_reg(OMAP3430_GR_MOD, OMAP2_RM_RSTCTRL); } /** * omap3xxx_prm_read_pending_irqs - read pending PRM MPU IRQs into @events * @events: ptr to a u32, preallocated by caller * * Read PRM_IRQSTATUS_MPU bits, AND'ed with the currently-enabled PRM * MPU IRQs, and store the result into the u32 pointed to by @events. * No return value. */ void omap3xxx_prm_read_pending_irqs(unsigned long *events) { u32 mask, st; /* XXX Can the mask read be avoided (e.g., can it come from RAM?) */ mask = omap2_prm_read_mod_reg(OCP_MOD, OMAP3_PRM_IRQENABLE_MPU_OFFSET); st = omap2_prm_read_mod_reg(OCP_MOD, OMAP3_PRM_IRQSTATUS_MPU_OFFSET); events[0] = mask & st; } /** * omap3xxx_prm_ocp_barrier - force buffered MPU writes to the PRM to complete * * Force any buffered writes to the PRM IP block to complete. Needed * by the PRM IRQ handler, which reads and writes directly to the IP * block, to avoid race conditions after acknowledging or clearing IRQ * bits. No return value. */ void omap3xxx_prm_ocp_barrier(void) { omap2_prm_read_mod_reg(OCP_MOD, OMAP3_PRM_REVISION_OFFSET); } /** * omap3xxx_prm_save_and_clear_irqen - save/clear PRM_IRQENABLE_MPU reg * @saved_mask: ptr to a u32 array to save IRQENABLE bits * * Save the PRM_IRQENABLE_MPU register to @saved_mask. @saved_mask * must be allocated by the caller. Intended to be used in the PRM * interrupt handler suspend callback. The OCP barrier is needed to * ensure the write to disable PRM interrupts reaches the PRM before * returning; otherwise, spurious interrupts might occur. No return * value. */ void omap3xxx_prm_save_and_clear_irqen(u32 *saved_mask) { saved_mask[0] = omap2_prm_read_mod_reg(OCP_MOD, OMAP3_PRM_IRQENABLE_MPU_OFFSET); omap2_prm_write_mod_reg(0, OCP_MOD, OMAP3_PRM_IRQENABLE_MPU_OFFSET); /* OCP barrier */ omap2_prm_read_mod_reg(OCP_MOD, OMAP3_PRM_REVISION_OFFSET); } /** * omap3xxx_prm_restore_irqen - set PRM_IRQENABLE_MPU register from args * @saved_mask: ptr to a u32 array of IRQENABLE bits saved previously * * Restore the PRM_IRQENABLE_MPU register from @saved_mask. Intended * to be used in the PRM interrupt handler resume callback to restore * values saved by omap3xxx_prm_save_and_clear_irqen(). No OCP * barrier should be needed here; any pending PRM interrupts will fire * once the writes reach the PRM. No return value. */ void omap3xxx_prm_restore_irqen(u32 *saved_mask) { omap2_prm_write_mod_reg(saved_mask[0], OCP_MOD, OMAP3_PRM_IRQENABLE_MPU_OFFSET); } /** * omap3xxx_prm_clear_mod_irqs - clear wake-up events from PRCM interrupt * @module: PRM module to clear wakeups from * @regs: register set to clear, 1 or 3 * @ignore_bits: wakeup status bits to ignore * * The purpose of this function is to clear any wake-up events latched * in the PRCM PM_WKST_x registers. It is possible that a wake-up event * may occur whilst attempting to clear a PM_WKST_x register and thus * set another bit in this register. A while loop is used to ensure * that any peripheral wake-up events occurring while attempting to * clear the PM_WKST_x are detected and cleared. */ int omap3xxx_prm_clear_mod_irqs(s16 module, u8 regs, u32 ignore_bits) { u32 wkst, fclk, iclk, clken; u16 wkst_off = (regs == 3) ? OMAP3430ES2_PM_WKST3 : PM_WKST1; u16 fclk_off = (regs == 3) ? OMAP3430ES2_CM_FCLKEN3 : CM_FCLKEN1; u16 iclk_off = (regs == 3) ? CM_ICLKEN3 : CM_ICLKEN1; u16 grpsel_off = (regs == 3) ? OMAP3430ES2_PM_MPUGRPSEL3 : OMAP3430_PM_MPUGRPSEL; int c = 0; wkst = omap2_prm_read_mod_reg(module, wkst_off); wkst &= omap2_prm_read_mod_reg(module, grpsel_off); wkst &= ~ignore_bits; if (wkst) { iclk = omap2_cm_read_mod_reg(module, iclk_off); fclk = omap2_cm_read_mod_reg(module, fclk_off); while (wkst) { clken = wkst; omap2_cm_set_mod_reg_bits(clken, module, iclk_off); /* * For USBHOST, we don't know whether HOST1 or * HOST2 woke us up, so enable both f-clocks */ if (module == OMAP3430ES2_USBHOST_MOD) clken |= 1 << OMAP3430ES2_EN_USBHOST2_SHIFT; omap2_cm_set_mod_reg_bits(clken, module, fclk_off); omap2_prm_write_mod_reg(wkst, module, wkst_off); wkst = omap2_prm_read_mod_reg(module, wkst_off); wkst &= ~ignore_bits; c++; } omap2_cm_write_mod_reg(iclk, module, iclk_off); omap2_cm_write_mod_reg(fclk, module, fclk_off); } return c; } /** * omap3_prm_reset_modem - toggle reset signal for modem * * Toggles the reset signal to modem IP block. Required to allow * OMAP3430 without stacked modem to idle properly. */ void __init omap3_prm_reset_modem(void) { omap2_prm_write_mod_reg( OMAP3430_RM_RSTCTRL_CORE_MODEM_SW_RSTPWRON_MASK | OMAP3430_RM_RSTCTRL_CORE_MODEM_SW_RST_MASK, CORE_MOD, OMAP2_RM_RSTCTRL); omap2_prm_write_mod_reg(0, CORE_MOD, OMAP2_RM_RSTCTRL); } /** * omap3_prm_init_pm - initialize PM related registers for PRM * @has_uart4: SoC has UART4 * @has_iva: SoC has IVA * * Initializes PRM registers for PM use. Called from PM init. */ void __init omap3_prm_init_pm(bool has_uart4, bool has_iva) { u32 en_uart4_mask; u32 grpsel_uart4_mask; /* * Enable control of expternal oscillator through * sys_clkreq. In the long run clock framework should * take care of this. */ omap2_prm_rmw_mod_reg_bits(OMAP_AUTOEXTCLKMODE_MASK, 1 << OMAP_AUTOEXTCLKMODE_SHIFT, OMAP3430_GR_MOD, OMAP3_PRM_CLKSRC_CTRL_OFFSET); /* setup wakup source */ omap2_prm_write_mod_reg(OMAP3430_EN_IO_MASK | OMAP3430_EN_GPIO1_MASK | OMAP3430_EN_GPT1_MASK | OMAP3430_EN_GPT12_MASK, WKUP_MOD, PM_WKEN); /* No need to write EN_IO, that is always enabled */ omap2_prm_write_mod_reg(OMAP3430_GRPSEL_GPIO1_MASK | OMAP3430_GRPSEL_GPT1_MASK | OMAP3430_GRPSEL_GPT12_MASK, WKUP_MOD, OMAP3430_PM_MPUGRPSEL); /* Enable PM_WKEN to support DSS LPR */ omap2_prm_write_mod_reg(OMAP3430_PM_WKEN_DSS_EN_DSS_MASK, OMAP3430_DSS_MOD, PM_WKEN); if (has_uart4) { en_uart4_mask = OMAP3630_EN_UART4_MASK; grpsel_uart4_mask = OMAP3630_GRPSEL_UART4_MASK; } /* Enable wakeups in PER */ omap2_prm_write_mod_reg(en_uart4_mask | OMAP3430_EN_GPIO2_MASK | OMAP3430_EN_GPIO3_MASK | OMAP3430_EN_GPIO4_MASK | OMAP3430_EN_GPIO5_MASK | OMAP3430_EN_GPIO6_MASK | OMAP3430_EN_UART3_MASK | OMAP3430_EN_MCBSP2_MASK | OMAP3430_EN_MCBSP3_MASK | OMAP3430_EN_MCBSP4_MASK, OMAP3430_PER_MOD, PM_WKEN); /* and allow them to wake up MPU */ omap2_prm_write_mod_reg(grpsel_uart4_mask | OMAP3430_GRPSEL_GPIO2_MASK | OMAP3430_GRPSEL_GPIO3_MASK | OMAP3430_GRPSEL_GPIO4_MASK | OMAP3430_GRPSEL_GPIO5_MASK | OMAP3430_GRPSEL_GPIO6_MASK | OMAP3430_GRPSEL_UART3_MASK | OMAP3430_GRPSEL_MCBSP2_MASK | OMAP3430_GRPSEL_MCBSP3_MASK | OMAP3430_GRPSEL_MCBSP4_MASK, OMAP3430_PER_MOD, OMAP3430_PM_MPUGRPSEL); /* Don't attach IVA interrupts */ if (has_iva) { omap2_prm_write_mod_reg(0, WKUP_MOD, OMAP3430_PM_IVAGRPSEL); omap2_prm_write_mod_reg(0, CORE_MOD, OMAP3430_PM_IVAGRPSEL1); omap2_prm_write_mod_reg(0, CORE_MOD, OMAP3430ES2_PM_IVAGRPSEL3); omap2_prm_write_mod_reg(0, OMAP3430_PER_MOD, OMAP3430_PM_IVAGRPSEL); } /* Clear any pending 'reset' flags */ omap2_prm_write_mod_reg(0xffffffff, MPU_MOD, OMAP2_RM_RSTST); omap2_prm_write_mod_reg(0xffffffff, CORE_MOD, OMAP2_RM_RSTST); omap2_prm_write_mod_reg(0xffffffff, OMAP3430_PER_MOD, OMAP2_RM_RSTST); omap2_prm_write_mod_reg(0xffffffff, OMAP3430_EMU_MOD, OMAP2_RM_RSTST); omap2_prm_write_mod_reg(0xffffffff, OMAP3430_NEON_MOD, OMAP2_RM_RSTST); omap2_prm_write_mod_reg(0xffffffff, OMAP3430_DSS_MOD, OMAP2_RM_RSTST); omap2_prm_write_mod_reg(0xffffffff, OMAP3430ES2_USBHOST_MOD, OMAP2_RM_RSTST); /* Clear any pending PRCM interrupts */ omap2_prm_write_mod_reg(0, OCP_MOD, OMAP3_PRM_IRQSTATUS_MPU_OFFSET); /* We need to idle iva2_pwrdm even on am3703 with no iva2. */ omap3xxx_prm_iva_idle(); omap3_prm_reset_modem(); } /** * omap3430_pre_es3_1_reconfigure_io_chain - restart wake-up daisy chain * * The ST_IO_CHAIN bit does not exist in 3430 before es3.1. The only * thing we can do is toggle EN_IO bit for earlier omaps. */ void omap3430_pre_es3_1_reconfigure_io_chain(void) { omap2_prm_clear_mod_reg_bits(OMAP3430_EN_IO_MASK, WKUP_MOD, PM_WKEN); omap2_prm_set_mod_reg_bits(OMAP3430_EN_IO_MASK, WKUP_MOD, PM_WKEN); omap2_prm_read_mod_reg(WKUP_MOD, PM_WKEN); } /** * omap3_prm_reconfigure_io_chain - clear latches and reconfigure I/O chain * * Clear any previously-latched I/O wakeup events and ensure that the * I/O wakeup gates are aligned with the current mux settings. Works * by asserting WUCLKIN, waiting for WUCLKOUT to be asserted, and then * deasserting WUCLKIN and clearing the ST_IO_CHAIN WKST bit. No * return value. These registers are only available in 3430 es3.1 and later. */ void omap3_prm_reconfigure_io_chain(void) { int i = 0; omap2_prm_set_mod_reg_bits(OMAP3430_EN_IO_CHAIN_MASK, WKUP_MOD, PM_WKEN); omap_test_timeout(omap2_prm_read_mod_reg(WKUP_MOD, PM_WKST) & OMAP3430_ST_IO_CHAIN_MASK, MAX_IOPAD_LATCH_TIME, i); if (i == MAX_IOPAD_LATCH_TIME) pr_warn("PRM: I/O chain clock line assertion timed out\n"); omap2_prm_clear_mod_reg_bits(OMAP3430_EN_IO_CHAIN_MASK, WKUP_MOD, PM_WKEN); omap2_prm_set_mod_reg_bits(OMAP3430_ST_IO_CHAIN_MASK, WKUP_MOD, PM_WKST); omap2_prm_read_mod_reg(WKUP_MOD, PM_WKST); } /** * omap3xxx_prm_reconfigure_io_chain - reconfigure I/O chain */ void omap3xxx_prm_reconfigure_io_chain(void) { if (omap3_prcm_irq_setup.reconfigure_io_chain) omap3_prcm_irq_setup.reconfigure_io_chain(); } /** * omap3xxx_prm_enable_io_wakeup - enable wakeup events from I/O wakeup latches * * Activates the I/O wakeup event latches and allows events logged by * those latches to signal a wakeup event to the PRCM. For I/O * wakeups to occur, WAKEUPENABLE bits must be set in the pad mux * registers, and omap3xxx_prm_reconfigure_io_chain() must be called. * No return value. */ static void __init omap3xxx_prm_enable_io_wakeup(void) { if (prm_features & PRM_HAS_IO_WAKEUP) omap2_prm_set_mod_reg_bits(OMAP3430_EN_IO_MASK, WKUP_MOD, PM_WKEN); } /** * omap3xxx_prm_read_reset_sources - return the last SoC reset source * * Return a u32 representing the last reset sources of the SoC. The * returned reset source bits are standardized across OMAP SoCs. */ static u32 omap3xxx_prm_read_reset_sources(void) { struct prm_reset_src_map *p; u32 r = 0; u32 v; v = omap2_prm_read_mod_reg(WKUP_MOD, OMAP2_RM_RSTST); p = omap3xxx_prm_reset_src_map; while (p->reg_shift >= 0 && p->std_shift >= 0) { if (v & (1 << p->reg_shift)) r |= 1 << p->std_shift; p++; } return r; } /** * omap3xxx_prm_iva_idle - ensure IVA is in idle so it can be put into retention * * In cases where IVA2 is activated by bootcode, it may prevent * full-chip retention or off-mode because it is not idle. This * function forces the IVA2 into idle state so it can go * into retention/off and thus allow full-chip retention/off. */ void omap3xxx_prm_iva_idle(void) { /* ensure IVA2 clock is disabled */ omap2_cm_write_mod_reg(0, OMAP3430_IVA2_MOD, CM_FCLKEN); /* if no clock activity, nothing else to do */ if (!(omap2_cm_read_mod_reg(OMAP3430_IVA2_MOD, OMAP3430_CM_CLKSTST) & OMAP3430_CLKACTIVITY_IVA2_MASK)) return; /* Reset IVA2 */ omap2_prm_write_mod_reg(OMAP3430_RST1_IVA2_MASK | OMAP3430_RST2_IVA2_MASK | OMAP3430_RST3_IVA2_MASK, OMAP3430_IVA2_MOD, OMAP2_RM_RSTCTRL); /* Enable IVA2 clock */ omap2_cm_write_mod_reg(OMAP3430_CM_FCLKEN_IVA2_EN_IVA2_MASK, OMAP3430_IVA2_MOD, CM_FCLKEN); /* Un-reset IVA2 */ omap2_prm_write_mod_reg(0, OMAP3430_IVA2_MOD, OMAP2_RM_RSTCTRL); /* Disable IVA2 clock */ omap2_cm_write_mod_reg(0, OMAP3430_IVA2_MOD, CM_FCLKEN); /* Reset IVA2 */ omap2_prm_write_mod_reg(OMAP3430_RST1_IVA2_MASK | OMAP3430_RST2_IVA2_MASK | OMAP3430_RST3_IVA2_MASK, OMAP3430_IVA2_MOD, OMAP2_RM_RSTCTRL); } /** * omap3xxx_prm_clear_global_cold_reset - checks the global cold reset status * and clears it if asserted * * Checks if cold-reset has occurred and clears the status bit if yes. Returns * 1 if cold-reset has occurred, 0 otherwise. */ int omap3xxx_prm_clear_global_cold_reset(void) { if (omap2_prm_read_mod_reg(OMAP3430_GR_MOD, OMAP3_PRM_RSTST_OFFSET) & OMAP3430_GLOBAL_COLD_RST_MASK) { omap2_prm_set_mod_reg_bits(OMAP3430_GLOBAL_COLD_RST_MASK, OMAP3430_GR_MOD, OMAP3_PRM_RSTST_OFFSET); return 1; } return 0; } void omap3_prm_save_scratchpad_contents(u32 *ptr) { *ptr++ = omap2_prm_read_mod_reg(OMAP3430_GR_MOD, OMAP3_PRM_CLKSRC_CTRL_OFFSET); *ptr++ = omap2_prm_read_mod_reg(OMAP3430_GR_MOD, OMAP3_PRM_CLKSEL_OFFSET); } /* Powerdomain low-level functions */ static int omap3_pwrdm_set_next_pwrst(struct powerdomain *pwrdm, u8 pwrst) { omap2_prm_rmw_mod_reg_bits(OMAP_POWERSTATE_MASK, (pwrst << OMAP_POWERSTATE_SHIFT), pwrdm->prcm_offs, OMAP2_PM_PWSTCTRL); return 0; } static int omap3_pwrdm_read_next_pwrst(struct powerdomain *pwrdm) { return omap2_prm_read_mod_bits_shift(pwrdm->prcm_offs, OMAP2_PM_PWSTCTRL, OMAP_POWERSTATE_MASK); } static int omap3_pwrdm_read_pwrst(struct powerdomain *pwrdm) { return omap2_prm_read_mod_bits_shift(pwrdm->prcm_offs, OMAP2_PM_PWSTST, OMAP_POWERSTATEST_MASK); } /* Applicable only for OMAP3. Not supported on OMAP2 */ static int omap3_pwrdm_read_prev_pwrst(struct powerdomain *pwrdm) { return omap2_prm_read_mod_bits_shift(pwrdm->prcm_offs, OMAP3430_PM_PREPWSTST, OMAP3430_LASTPOWERSTATEENTERED_MASK); } static int omap3_pwrdm_read_logic_pwrst(struct powerdomain *pwrdm) { return omap2_prm_read_mod_bits_shift(pwrdm->prcm_offs, OMAP2_PM_PWSTST, OMAP3430_LOGICSTATEST_MASK); } static int omap3_pwrdm_read_logic_retst(struct powerdomain *pwrdm) { return omap2_prm_read_mod_bits_shift(pwrdm->prcm_offs, OMAP2_PM_PWSTCTRL, OMAP3430_LOGICSTATEST_MASK); } static int omap3_pwrdm_read_prev_logic_pwrst(struct powerdomain *pwrdm) { return omap2_prm_read_mod_bits_shift(pwrdm->prcm_offs, OMAP3430_PM_PREPWSTST, OMAP3430_LASTLOGICSTATEENTERED_MASK); } static int omap3_get_mem_bank_lastmemst_mask(u8 bank) { switch (bank) { case 0: return OMAP3430_LASTMEM1STATEENTERED_MASK; case 1: return OMAP3430_LASTMEM2STATEENTERED_MASK; case 2: return OMAP3430_LASTSHAREDL2CACHEFLATSTATEENTERED_MASK; case 3: return OMAP3430_LASTL2FLATMEMSTATEENTERED_MASK; default: WARN_ON(1); /* should never happen */ return -EEXIST; } return 0; } static int omap3_pwrdm_read_prev_mem_pwrst(struct powerdomain *pwrdm, u8 bank) { u32 m; m = omap3_get_mem_bank_lastmemst_mask(bank); return omap2_prm_read_mod_bits_shift(pwrdm->prcm_offs, OMAP3430_PM_PREPWSTST, m); } static int omap3_pwrdm_clear_all_prev_pwrst(struct powerdomain *pwrdm) { omap2_prm_write_mod_reg(0, pwrdm->prcm_offs, OMAP3430_PM_PREPWSTST); return 0; } static int omap3_pwrdm_enable_hdwr_sar(struct powerdomain *pwrdm) { return omap2_prm_rmw_mod_reg_bits(0, 1 << OMAP3430ES2_SAVEANDRESTORE_SHIFT, pwrdm->prcm_offs, OMAP2_PM_PWSTCTRL); } static int omap3_pwrdm_disable_hdwr_sar(struct powerdomain *pwrdm) { return omap2_prm_rmw_mod_reg_bits(1 << OMAP3430ES2_SAVEANDRESTORE_SHIFT, 0, pwrdm->prcm_offs, OMAP2_PM_PWSTCTRL); } struct pwrdm_ops omap3_pwrdm_operations = { .pwrdm_set_next_pwrst = omap3_pwrdm_set_next_pwrst, .pwrdm_read_next_pwrst = omap3_pwrdm_read_next_pwrst, .pwrdm_read_pwrst = omap3_pwrdm_read_pwrst, .pwrdm_read_prev_pwrst = omap3_pwrdm_read_prev_pwrst, .pwrdm_set_logic_retst = omap2_pwrdm_set_logic_retst, .pwrdm_read_logic_pwrst = omap3_pwrdm_read_logic_pwrst, .pwrdm_read_logic_retst = omap3_pwrdm_read_logic_retst, .pwrdm_read_prev_logic_pwrst = omap3_pwrdm_read_prev_logic_pwrst, .pwrdm_set_mem_onst = omap2_pwrdm_set_mem_onst, .pwrdm_set_mem_retst = omap2_pwrdm_set_mem_retst, .pwrdm_read_mem_pwrst = omap2_pwrdm_read_mem_pwrst, .pwrdm_read_mem_retst = omap2_pwrdm_read_mem_retst, .pwrdm_read_prev_mem_pwrst = omap3_pwrdm_read_prev_mem_pwrst, .pwrdm_clear_all_prev_pwrst = omap3_pwrdm_clear_all_prev_pwrst, .pwrdm_enable_hdwr_sar = omap3_pwrdm_enable_hdwr_sar, .pwrdm_disable_hdwr_sar = omap3_pwrdm_disable_hdwr_sar, .pwrdm_wait_transition = omap2_pwrdm_wait_transition, }; /* * */ static int omap3xxx_prm_late_init(void); static struct prm_ll_data omap3xxx_prm_ll_data = { .read_reset_sources = &omap3xxx_prm_read_reset_sources, .late_init = &omap3xxx_prm_late_init, .assert_hardreset = &omap2_prm_assert_hardreset, }; int __init omap3xxx_prm_init(void) { if (omap3_has_io_wakeup()) prm_features |= PRM_HAS_IO_WAKEUP; return prm_register(&omap3xxx_prm_ll_data); } static struct of_device_id omap3_prm_dt_match_table[] = { { .compatible = "ti,omap3-prm" }, { } }; static int omap3xxx_prm_late_init(void) { int ret; if (!(prm_features & PRM_HAS_IO_WAKEUP)) return 0; if (omap3_has_io_chain_ctrl()) omap3_prcm_irq_setup.reconfigure_io_chain = omap3_prm_reconfigure_io_chain; else omap3_prcm_irq_setup.reconfigure_io_chain = omap3430_pre_es3_1_reconfigure_io_chain; if (of_have_populated_dt()) { struct device_node *np; int irq_num; np = of_find_matching_node(NULL, omap3_prm_dt_match_table); if (np) { irq_num = of_irq_get(np, 0); if (irq_num >= 0) omap3_prcm_irq_setup.irq = irq_num; } } omap3xxx_prm_enable_io_wakeup(); ret = omap_prcm_register_chain_handler(&omap3_prcm_irq_setup); if (!ret) irq_set_status_flags(omap_prcm_event_to_irq("io"), IRQ_NOAUTOEN); return ret; } static void __exit omap3xxx_prm_exit(void) { prm_unregister(&omap3xxx_prm_ll_data); } __exitcall(omap3xxx_prm_exit);