From bb362e2e4f4874f3fd4cbc2497385b9bceb3a08a Mon Sep 17 00:00:00 2001 From: Zeng Zhaoming Date: Wed, 18 Jan 2012 13:58:07 +0800 Subject: ASoC: sgtl5000: Fix wrong register name in restore Correct SGTL5000_CHIP_CLK_CTRL to SGTL5000_CHIP_REF_CTRL in sgtl5000_restore_regs(), and add comment to explain the restore order. Reported-by: Julia Lawall Signed-off-by: Zeng Zhaoming Acked-by: Dong Aisheng Signed-off-by: Mark Brown --- sound/soc/codecs/sgtl5000.c | 17 +++++++++++++---- 1 file changed, 13 insertions(+), 4 deletions(-) (limited to 'sound') diff --git a/sound/soc/codecs/sgtl5000.c b/sound/soc/codecs/sgtl5000.c index f8863ebb4304..7f4ba819a9f6 100644 --- a/sound/soc/codecs/sgtl5000.c +++ b/sound/soc/codecs/sgtl5000.c @@ -987,12 +987,12 @@ static int sgtl5000_restore_regs(struct snd_soc_codec *codec) /* restore regular registers */ for (reg = 0; reg <= SGTL5000_CHIP_SHORT_CTRL; reg += 2) { - /* this regs depends on the others */ + /* These regs should restore in particular order */ if (reg == SGTL5000_CHIP_ANA_POWER || reg == SGTL5000_CHIP_CLK_CTRL || reg == SGTL5000_CHIP_LINREG_CTRL || reg == SGTL5000_CHIP_LINE_OUT_CTRL || - reg == SGTL5000_CHIP_CLK_CTRL) + reg == SGTL5000_CHIP_REF_CTRL) continue; snd_soc_write(codec, reg, cache[reg]); @@ -1003,8 +1003,17 @@ static int sgtl5000_restore_regs(struct snd_soc_codec *codec) snd_soc_write(codec, reg, cache[reg]); /* - * restore power and other regs according - * to set_power() and set_clock() + * restore these regs according to the power setting sequence in + * sgtl5000_set_power_regs() and clock setting sequence in + * sgtl5000_set_clock(). + * + * The order of restore is: + * 1. SGTL5000_CHIP_CLK_CTRL MCLK_FREQ bits (1:0) should be restore after + * SGTL5000_CHIP_ANA_POWER PLL bits set + * 2. SGTL5000_CHIP_LINREG_CTRL should be set before + * SGTL5000_CHIP_ANA_POWER LINREG_D restored + * 3. SGTL5000_CHIP_REF_CTRL controls Analog Ground Voltage, + * prefer to resotre it after SGTL5000_CHIP_ANA_POWER restored */ snd_soc_write(codec, SGTL5000_CHIP_LINREG_CTRL, cache[SGTL5000_CHIP_LINREG_CTRL]); -- cgit v1.2.1 From 01b37e94c04bc6dae2c4837a2eb6fff6819ea82a Mon Sep 17 00:00:00 2001 From: Wolfram Sang Date: Wed, 18 Jan 2012 11:48:58 +0100 Subject: ASoC: tlv320aic32x4: always enable dividers Dividers (such as MDAC) are always needed, independent of the codec being I2S master or slave. Needed on a custom board where the codec has to be slave. Signed-off-by: Wolfram Sang Acked-by: Javier Martin Signed-off-by: Mark Brown --- sound/soc/codecs/tlv320aic32x4.c | 102 ++++++++++++++++++--------------------- 1 file changed, 46 insertions(+), 56 deletions(-) (limited to 'sound') diff --git a/sound/soc/codecs/tlv320aic32x4.c b/sound/soc/codecs/tlv320aic32x4.c index eb401ef021fb..3806cb6d9d4d 100644 --- a/sound/soc/codecs/tlv320aic32x4.c +++ b/sound/soc/codecs/tlv320aic32x4.c @@ -60,7 +60,6 @@ struct aic32x4_rate_divs { struct aic32x4_priv { u32 sysclk; - s32 master; u8 page_no; void *control_data; u32 power_cfg; @@ -369,7 +368,6 @@ static int aic32x4_set_dai_sysclk(struct snd_soc_dai *codec_dai, static int aic32x4_set_dai_fmt(struct snd_soc_dai *codec_dai, unsigned int fmt) { struct snd_soc_codec *codec = codec_dai->codec; - struct aic32x4_priv *aic32x4 = snd_soc_codec_get_drvdata(codec); u8 iface_reg_1; u8 iface_reg_2; u8 iface_reg_3; @@ -384,11 +382,9 @@ static int aic32x4_set_dai_fmt(struct snd_soc_dai *codec_dai, unsigned int fmt) /* set master/slave audio interface */ switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) { case SND_SOC_DAIFMT_CBM_CFM: - aic32x4->master = 1; iface_reg_1 |= AIC32X4_BCLKMASTER | AIC32X4_WCLKMASTER; break; case SND_SOC_DAIFMT_CBS_CFS: - aic32x4->master = 0; break; default: printk(KERN_ERR "aic32x4: invalid DAI master/slave interface\n"); @@ -526,64 +522,58 @@ static int aic32x4_mute(struct snd_soc_dai *dai, int mute) static int aic32x4_set_bias_level(struct snd_soc_codec *codec, enum snd_soc_bias_level level) { - struct aic32x4_priv *aic32x4 = snd_soc_codec_get_drvdata(codec); - switch (level) { case SND_SOC_BIAS_ON: - if (aic32x4->master) { - /* Switch on PLL */ - snd_soc_update_bits(codec, AIC32X4_PLLPR, - AIC32X4_PLLEN, AIC32X4_PLLEN); - - /* Switch on NDAC Divider */ - snd_soc_update_bits(codec, AIC32X4_NDAC, - AIC32X4_NDACEN, AIC32X4_NDACEN); - - /* Switch on MDAC Divider */ - snd_soc_update_bits(codec, AIC32X4_MDAC, - AIC32X4_MDACEN, AIC32X4_MDACEN); - - /* Switch on NADC Divider */ - snd_soc_update_bits(codec, AIC32X4_NADC, - AIC32X4_NADCEN, AIC32X4_NADCEN); - - /* Switch on MADC Divider */ - snd_soc_update_bits(codec, AIC32X4_MADC, - AIC32X4_MADCEN, AIC32X4_MADCEN); - - /* Switch on BCLK_N Divider */ - snd_soc_update_bits(codec, AIC32X4_BCLKN, - AIC32X4_BCLKEN, AIC32X4_BCLKEN); - } + /* Switch on PLL */ + snd_soc_update_bits(codec, AIC32X4_PLLPR, + AIC32X4_PLLEN, AIC32X4_PLLEN); + + /* Switch on NDAC Divider */ + snd_soc_update_bits(codec, AIC32X4_NDAC, + AIC32X4_NDACEN, AIC32X4_NDACEN); + + /* Switch on MDAC Divider */ + snd_soc_update_bits(codec, AIC32X4_MDAC, + AIC32X4_MDACEN, AIC32X4_MDACEN); + + /* Switch on NADC Divider */ + snd_soc_update_bits(codec, AIC32X4_NADC, + AIC32X4_NADCEN, AIC32X4_NADCEN); + + /* Switch on MADC Divider */ + snd_soc_update_bits(codec, AIC32X4_MADC, + AIC32X4_MADCEN, AIC32X4_MADCEN); + + /* Switch on BCLK_N Divider */ + snd_soc_update_bits(codec, AIC32X4_BCLKN, + AIC32X4_BCLKEN, AIC32X4_BCLKEN); break; case SND_SOC_BIAS_PREPARE: break; case SND_SOC_BIAS_STANDBY: - if (aic32x4->master) { - /* Switch off PLL */ - snd_soc_update_bits(codec, AIC32X4_PLLPR, - AIC32X4_PLLEN, 0); - - /* Switch off NDAC Divider */ - snd_soc_update_bits(codec, AIC32X4_NDAC, - AIC32X4_NDACEN, 0); - - /* Switch off MDAC Divider */ - snd_soc_update_bits(codec, AIC32X4_MDAC, - AIC32X4_MDACEN, 0); - - /* Switch off NADC Divider */ - snd_soc_update_bits(codec, AIC32X4_NADC, - AIC32X4_NADCEN, 0); - - /* Switch off MADC Divider */ - snd_soc_update_bits(codec, AIC32X4_MADC, - AIC32X4_MADCEN, 0); - - /* Switch off BCLK_N Divider */ - snd_soc_update_bits(codec, AIC32X4_BCLKN, - AIC32X4_BCLKEN, 0); - } + /* Switch off PLL */ + snd_soc_update_bits(codec, AIC32X4_PLLPR, + AIC32X4_PLLEN, 0); + + /* Switch off NDAC Divider */ + snd_soc_update_bits(codec, AIC32X4_NDAC, + AIC32X4_NDACEN, 0); + + /* Switch off MDAC Divider */ + snd_soc_update_bits(codec, AIC32X4_MDAC, + AIC32X4_MDACEN, 0); + + /* Switch off NADC Divider */ + snd_soc_update_bits(codec, AIC32X4_NADC, + AIC32X4_NADCEN, 0); + + /* Switch off MADC Divider */ + snd_soc_update_bits(codec, AIC32X4_MADC, + AIC32X4_MADCEN, 0); + + /* Switch off BCLK_N Divider */ + snd_soc_update_bits(codec, AIC32X4_BCLKN, + AIC32X4_BCLKEN, 0); break; case SND_SOC_BIAS_OFF: break; -- cgit v1.2.1 From 0c93a167a6b3fa510c74e88477852c41defda075 Mon Sep 17 00:00:00 2001 From: Wolfram Sang Date: Wed, 18 Jan 2012 11:48:59 +0100 Subject: ASoC: tlv320aic32x4: always enable analouge block Register LDOCTLEN must always be initialized to clear the analog power control bit, otherwise the analog block will stay deactivated. Signed-off-by: Wolfram Sang Acked-by: Javier Martin Signed-off-by: Mark Brown --- sound/soc/codecs/tlv320aic32x4.c | 8 +++++--- 1 file changed, 5 insertions(+), 3 deletions(-) (limited to 'sound') diff --git a/sound/soc/codecs/tlv320aic32x4.c b/sound/soc/codecs/tlv320aic32x4.c index 3806cb6d9d4d..372b0b83bd9f 100644 --- a/sound/soc/codecs/tlv320aic32x4.c +++ b/sound/soc/codecs/tlv320aic32x4.c @@ -641,9 +641,11 @@ static int aic32x4_probe(struct snd_soc_codec *codec) if (aic32x4->power_cfg & AIC32X4_PWR_AVDD_DVDD_WEAK_DISABLE) { snd_soc_write(codec, AIC32X4_PWRCFG, AIC32X4_AVDDWEAKDISABLE); } - if (aic32x4->power_cfg & AIC32X4_PWR_AIC32X4_LDO_ENABLE) { - snd_soc_write(codec, AIC32X4_LDOCTL, AIC32X4_LDOCTLEN); - } + + tmp_reg = (aic32x4->power_cfg & AIC32X4_PWR_AIC32X4_LDO_ENABLE) ? + AIC32X4_LDOCTLEN : 0; + snd_soc_write(codec, AIC32X4_LDOCTL, tmp_reg); + tmp_reg = snd_soc_read(codec, AIC32X4_CMMODE); if (aic32x4->power_cfg & AIC32X4_PWR_CMMODE_LDOIN_RANGE_18_36) { tmp_reg |= AIC32X4_LDOIN_18_36; -- cgit v1.2.1 From e53e417331c57b9b97e3f8be870214a02c99265c Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Wed, 18 Jan 2012 20:02:38 +0000 Subject: ASoC: Mark WM5100 register map cache only when going into BIAS_OFF Writing to the registers won't work if we do actually manage to hit a fully powered off state. Signed-off-by: Mark Brown Cc: stable@kernel.org --- sound/soc/codecs/wm5100.c | 1 + 1 file changed, 1 insertion(+) (limited to 'sound') diff --git a/sound/soc/codecs/wm5100.c b/sound/soc/codecs/wm5100.c index 8b24323d6b2c..3fd9cfe6dcd7 100644 --- a/sound/soc/codecs/wm5100.c +++ b/sound/soc/codecs/wm5100.c @@ -1402,6 +1402,7 @@ static int wm5100_set_bias_level(struct snd_soc_codec *codec, break; case SND_SOC_BIAS_OFF: + regcache_cache_only(wm5100->regmap, true); if (wm5100->pdata.ldo_ena) gpio_set_value_cansleep(wm5100->pdata.ldo_ena, 0); regulator_bulk_disable(ARRAY_SIZE(wm5100->core_supplies), -- cgit v1.2.1 From 495174a8ffbaa0d15153d855cf206cdc46d51cf4 Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Thu, 19 Jan 2012 11:16:37 +0000 Subject: ASoC: Don't go through cache when applying WM5100 rev A updates These are all to either uncached registers or fixes to register defaults, in the former case the cache won't do anything and in the latter case we're fixing things so the cache sync will do the right thing. Signed-off-by: Mark Brown Cc: stable@kernel.org --- sound/soc/codecs/wm5100.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'sound') diff --git a/sound/soc/codecs/wm5100.c b/sound/soc/codecs/wm5100.c index 3fd9cfe6dcd7..66f0611e68b6 100644 --- a/sound/soc/codecs/wm5100.c +++ b/sound/soc/codecs/wm5100.c @@ -1377,6 +1377,7 @@ static int wm5100_set_bias_level(struct snd_soc_codec *codec, switch (wm5100->rev) { case 0: + regcache_cache_bypass(wm5100->regmap, true); snd_soc_write(codec, 0x11, 0x3); snd_soc_write(codec, 0x203, 0xc); snd_soc_write(codec, 0x206, 0); @@ -1392,6 +1393,7 @@ static int wm5100_set_bias_level(struct snd_soc_codec *codec, snd_soc_write(codec, wm5100_reva_patches[i].reg, wm5100_reva_patches[i].val); + regcache_cache_bypass(wm5100->regmap, false); break; default: break; -- cgit v1.2.1 From fed22007113cb857e917913ce016d9b539dc3a80 Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Wed, 18 Jan 2012 19:17:06 +0000 Subject: ASoC: Disable register synchronisation for low frequency WM8996 SYSCLK With a low frequency SYSCLK and a fast I2C clock register synchronisation may occasionally take too long to take effect, causing I/O issues. Disable synchronisation in order to avoid any issues. Signed-off-by: Mark Brown Cc: stable@kernel.org --- sound/soc/codecs/wm8996.c | 4 ++++ sound/soc/codecs/wm8996.h | 4 ++++ 2 files changed, 8 insertions(+) (limited to 'sound') diff --git a/sound/soc/codecs/wm8996.c b/sound/soc/codecs/wm8996.c index d8da10fe5b52..86f5b6bd7af2 100644 --- a/sound/soc/codecs/wm8996.c +++ b/sound/soc/codecs/wm8996.c @@ -2007,6 +2007,7 @@ static int wm8996_set_sysclk(struct snd_soc_dai *dai, struct wm8996_priv *wm8996 = snd_soc_codec_get_drvdata(codec); int lfclk = 0; int ratediv = 0; + int sync = WM8996_REG_SYNC; int src; int old; @@ -2051,6 +2052,7 @@ static int wm8996_set_sysclk(struct snd_soc_dai *dai, case 32000: case 32768: lfclk = WM8996_LFCLK_ENA; + sync = 0; break; default: dev_warn(codec->dev, "Unsupported clock rate %dHz\n", @@ -2064,6 +2066,8 @@ static int wm8996_set_sysclk(struct snd_soc_dai *dai, WM8996_SYSCLK_SRC_MASK | WM8996_SYSCLK_DIV_MASK, src << WM8996_SYSCLK_SRC_SHIFT | ratediv); snd_soc_update_bits(codec, WM8996_CLOCKING_1, WM8996_LFCLK_ENA, lfclk); + snd_soc_update_bits(codec, WM8996_CONTROL_INTERFACE_1, + WM8996_REG_SYNC, sync); snd_soc_update_bits(codec, WM8996_AIF_CLOCKING_1, WM8996_SYSCLK_ENA, old); diff --git a/sound/soc/codecs/wm8996.h b/sound/soc/codecs/wm8996.h index 0fde643194ce..de9ac3e44aec 100644 --- a/sound/soc/codecs/wm8996.h +++ b/sound/soc/codecs/wm8996.h @@ -1567,6 +1567,10 @@ int wm8996_detect(struct snd_soc_codec *codec, struct snd_soc_jack *jack, /* * R257 (0x101) - Control Interface (1) */ +#define WM8996_REG_SYNC 0x8000 /* REG_SYNC */ +#define WM8996_REG_SYNC_MASK 0x8000 /* REG_SYNC */ +#define WM8996_REG_SYNC_SHIFT 15 /* REG_SYNC */ +#define WM8996_REG_SYNC_WIDTH 1 /* REG_SYNC */ #define WM8996_AUTO_INC 0x0004 /* AUTO_INC */ #define WM8996_AUTO_INC_MASK 0x0004 /* AUTO_INC */ #define WM8996_AUTO_INC_SHIFT 2 /* AUTO_INC */ -- cgit v1.2.1 From 6b35f924b80a0e6d71711e66f5b3c16f427f3d2a Mon Sep 17 00:00:00 2001 From: Fabio Estevam Date: Thu, 19 Jan 2012 10:23:22 -0200 Subject: ASoC: mxs: Fix mxs-saif timeout On a mx28evk board the following errors happens on mxs-sgtl5000 probe: [ 0.660000] saif0_clk_set_rate: divider writing timeout [ 0.670000] mxs-sgtl5000: probe of mxs-sgtl5000.0 failed with error -110 [ 0.670000] ALSA device list: [ 0.680000] No soundcards found. This timeout happens because clk_set_rate will result in writing to the DIV bits of register HW_CLKCTRL_SAIF0 with the saif clock gated (CLKGATE bit set to one). MX28 Reference states the following about CLKGATE: "The DIV field can change ONLY when this clock gate bit field is low." So call clk_prepare_enable prior to clk_set_rate to fix this problem. After this change the mxs-saif driver can be correctly probed and audio is functional. Signed-off-by: Fabio Estevam Signed-off-by: Mark Brown --- sound/soc/mxs/mxs-saif.c | 5 +++++ 1 file changed, 5 insertions(+) (limited to 'sound') diff --git a/sound/soc/mxs/mxs-saif.c b/sound/soc/mxs/mxs-saif.c index dccfb37a9626..f204dbac11d4 100644 --- a/sound/soc/mxs/mxs-saif.c +++ b/sound/soc/mxs/mxs-saif.c @@ -124,6 +124,8 @@ static int mxs_saif_set_clk(struct mxs_saif *saif, * * If MCLK is not used, we just set saif clk to 512*fs. */ + clk_prepare_enable(master_saif->clk); + if (master_saif->mclk_in_use) { if (mclk % 32 == 0) { scr &= ~BM_SAIF_CTRL_BITCLK_BASE_RATE; @@ -133,6 +135,7 @@ static int mxs_saif_set_clk(struct mxs_saif *saif, ret = clk_set_rate(master_saif->clk, 384 * rate); } else { /* SAIF MCLK should be either 32x or 48x */ + clk_disable_unprepare(master_saif->clk); return -EINVAL; } } else { @@ -140,6 +143,8 @@ static int mxs_saif_set_clk(struct mxs_saif *saif, scr &= ~BM_SAIF_CTRL_BITCLK_BASE_RATE; } + clk_disable_unprepare(master_saif->clk); + if (ret) return ret; -- cgit v1.2.1 From a14304edcd5e8323205db34b08f709feb5357e64 Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Sat, 21 Jan 2012 21:48:53 +0000 Subject: ASoC: wm8996: Call _POST_PMU callback for CPVDD We should be allowing a 5ms delay after the charge pump is started in order to ensure it has finished ramping. Signed-off-by: Mark Brown Cc: stable@kernel.org --- sound/soc/codecs/wm8996.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'sound') diff --git a/sound/soc/codecs/wm8996.c b/sound/soc/codecs/wm8996.c index 86f5b6bd7af2..13aa2bdaa7d7 100644 --- a/sound/soc/codecs/wm8996.c +++ b/sound/soc/codecs/wm8996.c @@ -1120,7 +1120,8 @@ SND_SOC_DAPM_SUPPLY_S("SYSCLK", 1, WM8996_AIF_CLOCKING_1, 0, 0, NULL, 0), SND_SOC_DAPM_SUPPLY_S("SYSDSPCLK", 2, WM8996_CLOCKING_1, 1, 0, NULL, 0), SND_SOC_DAPM_SUPPLY_S("AIFCLK", 2, WM8996_CLOCKING_1, 2, 0, NULL, 0), SND_SOC_DAPM_SUPPLY_S("Charge Pump", 2, WM8996_CHARGE_PUMP_1, 15, 0, cp_event, - SND_SOC_DAPM_PRE_PMU | SND_SOC_DAPM_POST_PMD), + SND_SOC_DAPM_PRE_PMU | SND_SOC_DAPM_POST_PMU | + SND_SOC_DAPM_POST_PMD), SND_SOC_DAPM_SUPPLY("Bandgap", SND_SOC_NOPM, 0, 0, bg_event, SND_SOC_DAPM_PRE_PMU | SND_SOC_DAPM_POST_PMD), SND_SOC_DAPM_SUPPLY("LDO2", WM8996_POWER_MANAGEMENT_2, 1, 0, NULL, 0), -- cgit v1.2.1 From 7edf1a4f27f44588d69cbde955651990090eb25d Mon Sep 17 00:00:00 2001 From: Jesper Juhl Date: Mon, 23 Jan 2012 21:15:48 +0100 Subject: ASoC: wm8958: Use correct format string in dev_err() call To print a value of type size_t one should use %zd, not %d. Signed-off-by: Jesper Juhl Signed-off-by: Mark Brown --- sound/soc/codecs/wm8958-dsp2.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'sound') diff --git a/sound/soc/codecs/wm8958-dsp2.c b/sound/soc/codecs/wm8958-dsp2.c index 8d4ea43d40a3..40ac888faf3d 100644 --- a/sound/soc/codecs/wm8958-dsp2.c +++ b/sound/soc/codecs/wm8958-dsp2.c @@ -55,7 +55,7 @@ static int wm8958_dsp2_fw(struct snd_soc_codec *codec, const char *name, return 0; if (fw->size < 32) { - dev_err(codec->dev, "%s: firmware too short (%d bytes)\n", + dev_err(codec->dev, "%s: firmware too short (%zd bytes)\n", name, fw->size); goto err; } -- cgit v1.2.1 From c83f1d7e71625801c72f4013291194e09b6f0a6e Mon Sep 17 00:00:00 2001 From: Jesper Juhl Date: Mon, 23 Jan 2012 22:28:44 +0100 Subject: ASoC: wm2000: Fix use-after-free - don't release_firmware() twice on error In wm2000_i2c_probe(), if we take the true branch in " ret = snd_soc_register_codec(&i2c->dev, &soc_codec_dev_wm2000, NULL, 0); if (ret != 0) goto err_fw; " then we'll release_firmware(fw) at the 'err_fw' label. But we've already done that just a few lines above. That's a use-after-free bug. This patch restructures the code so that we always call release_firmware(fw) before leaving the function, but only ever call it once. This means that we have to initialize 'fw' to NULL since some paths may now end up calling it without having called request_firmware(), but since request_firmware() deals gracefully with NULL pointers, we are fine if we just NULL initialize it. Signed-off-by: Jesper Juhl Signed-off-by: Mark Brown --- sound/soc/codecs/wm2000.c | 31 +++++++++++++------------------ 1 file changed, 13 insertions(+), 18 deletions(-) (limited to 'sound') diff --git a/sound/soc/codecs/wm2000.c b/sound/soc/codecs/wm2000.c index c2880907fced..a75c3766aede 100644 --- a/sound/soc/codecs/wm2000.c +++ b/sound/soc/codecs/wm2000.c @@ -733,8 +733,9 @@ static int __devinit wm2000_i2c_probe(struct i2c_client *i2c, struct wm2000_priv *wm2000; struct wm2000_platform_data *pdata; const char *filename; - const struct firmware *fw; - int reg, ret; + const struct firmware *fw = NULL; + int ret; + int reg; u16 id; wm2000 = devm_kzalloc(&i2c->dev, sizeof(struct wm2000_priv), @@ -751,7 +752,7 @@ static int __devinit wm2000_i2c_probe(struct i2c_client *i2c, ret = PTR_ERR(wm2000->regmap); dev_err(&i2c->dev, "Failed to allocate register map: %d\n", ret); - goto err; + goto out; } /* Verify that this is a WM2000 */ @@ -763,7 +764,7 @@ static int __devinit wm2000_i2c_probe(struct i2c_client *i2c, if (id != 0x2000) { dev_err(&i2c->dev, "Device is not a WM2000 - ID %x\n", id); ret = -ENODEV; - goto err_regmap; + goto out_regmap_exit; } reg = wm2000_read(i2c, WM2000_REG_REVISON); @@ -782,7 +783,7 @@ static int __devinit wm2000_i2c_probe(struct i2c_client *i2c, ret = request_firmware(&fw, filename, &i2c->dev); if (ret != 0) { dev_err(&i2c->dev, "Failed to acquire ANC data: %d\n", ret); - goto err_regmap; + goto out_regmap_exit; } /* Pre-cook the concatenation of the register address onto the image */ @@ -793,15 +794,13 @@ static int __devinit wm2000_i2c_probe(struct i2c_client *i2c, if (wm2000->anc_download == NULL) { dev_err(&i2c->dev, "Out of memory\n"); ret = -ENOMEM; - goto err_fw; + goto out_regmap_exit; } wm2000->anc_download[0] = 0x80; wm2000->anc_download[1] = 0x00; memcpy(wm2000->anc_download + 2, fw->data, fw->size); - release_firmware(fw); - wm2000->anc_eng_ena = 1; wm2000->anc_active = 1; wm2000->spk_ena = 1; @@ -809,18 +808,14 @@ static int __devinit wm2000_i2c_probe(struct i2c_client *i2c, wm2000_reset(wm2000); - ret = snd_soc_register_codec(&i2c->dev, &soc_codec_dev_wm2000, - NULL, 0); - if (ret != 0) - goto err_fw; + ret = snd_soc_register_codec(&i2c->dev, &soc_codec_dev_wm2000, NULL, 0); + if (!ret) + goto out; - return 0; - -err_fw: - release_firmware(fw); -err_regmap: +out_regmap_exit: regmap_exit(wm2000->regmap); -err: +out: + release_firmware(fw); return ret; } -- cgit v1.2.1