From c0cc3f1665256b7cfdc1d581f997dcea1af71405 Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Fri, 28 Sep 2012 16:50:15 +0100 Subject: ASoC: wm8994: Allow a delay between jack insertion and microphone detect This can be used to provide some additional settling time to ensure that we don't start microphone detection while the microphone pin is connected to one of the headphone pins. Signed-off-by: Mark Brown --- sound/soc/codecs/wm8994.c | 74 +++++++++++++++++++++++++++++++++++------------ 1 file changed, 55 insertions(+), 19 deletions(-) (limited to 'sound/soc') diff --git a/sound/soc/codecs/wm8994.c b/sound/soc/codecs/wm8994.c index 2b2dadc54dac..07095a9ca9a6 100644 --- a/sound/soc/codecs/wm8994.c +++ b/sound/soc/codecs/wm8994.c @@ -3470,11 +3470,46 @@ static void wm8958_default_micdet(u16 status, void *data) } } +/* Deferred mic detection to allow for extra settling time */ +static void wm1811_mic_work(struct work_struct *work) +{ + struct wm8994_priv *wm8994 = container_of(work, struct wm8994_priv, + mic_work.work); + struct snd_soc_codec *codec = wm8994->hubs.codec; + + pm_runtime_get_sync(codec->dev); + + /* If required for an external cap force MICBIAS on */ + if (wm8994->pdata->jd_ext_cap) { + snd_soc_dapm_force_enable_pin(&codec->dapm, + "MICBIAS2"); + snd_soc_dapm_sync(&codec->dapm); + } + + mutex_lock(&wm8994->accdet_lock); + + dev_dbg(codec->dev, "Starting mic detection\n"); + + /* + * Start off measument of microphone impedence to find out + * what's actually there. + */ + wm8994->mic_detecting = true; + wm1811_jackdet_set_mode(codec, WM1811_JACKDET_MODE_MIC); + + snd_soc_update_bits(codec, WM8958_MIC_DETECT_1, + WM8958_MICD_ENA, WM8958_MICD_ENA); + + mutex_unlock(&wm8994->accdet_lock); + + pm_runtime_put(codec->dev); +} + static irqreturn_t wm1811_jackdet_irq(int irq, void *data) { struct wm8994_priv *wm8994 = data; struct snd_soc_codec *codec = wm8994->hubs.codec; - int reg; + int reg, delay; bool present; pm_runtime_get_sync(codec->dev); @@ -3505,18 +3540,14 @@ static irqreturn_t wm1811_jackdet_irq(int irq, void *data) snd_soc_update_bits(codec, WM1811_JACKDET_CTRL, WM1811_JACKDET_DB, 0); - /* - * Start off measument of microphone impedence to find - * out what's actually there. - */ - wm8994->mic_detecting = true; - wm1811_jackdet_set_mode(codec, WM1811_JACKDET_MODE_MIC); - - snd_soc_update_bits(codec, WM8958_MIC_DETECT_1, - WM8958_MICD_ENA, WM8958_MICD_ENA); + delay = wm8994->pdata->micdet_delay; + schedule_delayed_work(&wm8994->mic_work, + msecs_to_jiffies(delay)); } else { dev_dbg(codec->dev, "Jack not detected\n"); + cancel_delayed_work_sync(&wm8994->mic_work); + snd_soc_update_bits(codec, WM8958_MICBIAS2, WM8958_MICB2_DISCH, WM8958_MICB2_DISCH); @@ -3533,14 +3564,9 @@ static irqreturn_t wm1811_jackdet_irq(int irq, void *data) mutex_unlock(&wm8994->accdet_lock); - /* If required for an external cap force MICBIAS on */ - if (wm8994->pdata->jd_ext_cap) { - if (present) - snd_soc_dapm_force_enable_pin(&codec->dapm, - "MICBIAS2"); - else - snd_soc_dapm_disable_pin(&codec->dapm, "MICBIAS2"); - } + /* Turn off MICBIAS if it was on for an external cap */ + if (wm8994->pdata->jd_ext_cap && !present) + snd_soc_dapm_disable_pin(&codec->dapm, "MICBIAS2"); if (present) snd_soc_jack_report(wm8994->micdet[0].jack, @@ -3763,10 +3789,20 @@ static int wm8994_codec_probe(struct snd_soc_codec *codec) snd_soc_codec_set_cache_io(codec, 16, 16, SND_SOC_REGMAP); mutex_init(&wm8994->accdet_lock); - INIT_DELAYED_WORK(&wm8994->mic_work, wm8994_mic_work); INIT_DELAYED_WORK(&wm8994->jackdet_bootstrap, wm1811_jackdet_bootstrap); + switch (control->type) { + case WM8994: + INIT_DELAYED_WORK(&wm8994->mic_work, wm8994_mic_work); + break; + case WM1811: + INIT_DELAYED_WORK(&wm8994->mic_work, wm1811_mic_work); + break; + default: + break; + } + for (i = 0; i < ARRAY_SIZE(wm8994->fll_locked); i++) init_completion(&wm8994->fll_locked[i]); -- cgit v1.2.1