From 2f005471e2e2f2c7fa5898153387d421f7d24ad6 Mon Sep 17 00:00:00 2001 From: Peter Ujfalusi Date: Thu, 6 May 2010 12:04:25 +0300 Subject: ASoC: tlv320dac33: Use codec defaults for LOM/LOP and DAC power Do not change the codec defaults for the following registers: 0x40, 0x41: Line output gains, do not use amplification 0x42: LOM/LOP Voltage hold, and selection 0x44: LOM inversion control It has been found, that the values configured to these registers can cause amplification, which can make the output of DAC33 distorted. The codec reset values are considered safe in all environmnts. Signed-off-by: Peter Ujfalusi Acked-by: Mark Brown Signed-off-by: Liam Girdwood --- sound/soc/codecs/tlv320dac33.c | 11 ----------- 1 file changed, 11 deletions(-) (limited to 'sound/soc') diff --git a/sound/soc/codecs/tlv320dac33.c b/sound/soc/codecs/tlv320dac33.c index 68b7ccbf2e7c..ad5e2636c944 100644 --- a/sound/soc/codecs/tlv320dac33.c +++ b/sound/soc/codecs/tlv320dac33.c @@ -303,21 +303,10 @@ static void dac33_init_chip(struct snd_soc_codec *codec) /* C : (defaults) */ dac33_write(codec, DAC33_DAC_CTRL_C, 0x00); - /* 64-65 : L&R DAC power control - Line In -> OUT 1V/V Gain, DAC -> OUT 4V/V Gain*/ - dac33_write(codec, DAC33_LDAC_PWR_CTRL, DAC33_LROUT_GAIN(2)); - dac33_write(codec, DAC33_RDAC_PWR_CTRL, DAC33_LROUT_GAIN(2)); - /* 73 : volume soft stepping control, clock source = internal osc (?) */ dac33_write(codec, DAC33_ANA_VOL_SOFT_STEP_CTRL, DAC33_VOLCLKEN); - /* 66 : LOP/LOM Modes */ - dac33_write(codec, DAC33_OUT_AMP_CM_CTRL, 0xff); - - /* 68 : LOM inverted from LOP */ - dac33_write(codec, DAC33_OUT_AMP_CTRL, (3<<2)); - dac33_write(codec, DAC33_PWR_CTRL, DAC33_PDNALLB); /* Restore only selected registers (gains mostly) */ -- cgit v1.2.1