From 15870f05e90a365f8022da416e713be0c5024e2f Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Mon, 5 Oct 2009 08:25:13 +0200 Subject: ALSA: hda - Fix invalid initializations for ALC861 auto mode The recent auto-parser doesn't work for machines with a single output with ALC861, such as Toshiba laptops, because alc_subsystem_id() sets the hp_pins[0] while it's listed in line_outs[0]. This ends up with the doubled initialization of the same mixer widget, and it mutes the DAC route because hp_pins has no DAC assigned. To fix this problem, just check spec->autocfg.hp_outs and speaker_outs so that they are really detected pins. Reference: Novell bnc#544161 http://bugzilla.novell.com/show_bug.cgi?id=544161 Signed-off-by: Takashi Iwai --- sound/pci/hda/patch_realtek.c | 15 ++++++++------- 1 file changed, 8 insertions(+), 7 deletions(-) (limited to 'sound/pci/hda') diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index 7810d3dcad83..c1e05994cc31 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -14357,15 +14357,16 @@ static void alc861_auto_init_multi_out(struct hda_codec *codec) static void alc861_auto_init_hp_out(struct hda_codec *codec) { struct alc_spec *spec = codec->spec; - hda_nid_t pin; - pin = spec->autocfg.hp_pins[0]; - if (pin) - alc861_auto_set_output_and_unmute(codec, pin, PIN_HP, + if (spec->autocfg.hp_outs) + alc861_auto_set_output_and_unmute(codec, + spec->autocfg.hp_pins[0], + PIN_HP, spec->multiout.hp_nid); - pin = spec->autocfg.speaker_pins[0]; - if (pin) - alc861_auto_set_output_and_unmute(codec, pin, PIN_OUT, + if (spec->autocfg.speaker_outs) + alc861_auto_set_output_and_unmute(codec, + spec->autocfg.speaker_pins[0], + PIN_OUT, spec->multiout.dac_nids[0]); } -- cgit v1.2.1 From f8f25ba3563dab14b1c3ea4d829642b8a61ca5d7 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Tue, 6 Oct 2009 08:31:29 +0200 Subject: ALSA: hda - Add a workaround for ASUS A7K ASUS A7K needs additional GPIO1 bit setup; it has to be cleared. Added a new fixup hook for this laptop so that it works as is. Refernece: Novell bnc#494309 http://bugzilla.novell.com/show_bug.cgi?id=494309 Signed-off-by: Takashi Iwai --- sound/pci/hda/patch_realtek.c | 59 +++++++++++++++++++++++++++++++++++-------- 1 file changed, 48 insertions(+), 11 deletions(-) (limited to 'sound/pci/hda') diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index c1e05994cc31..901c2999ed64 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -1362,7 +1362,7 @@ static void alc_ssid_check(struct hda_codec *codec, } /* - * Fix-up pin default configurations + * Fix-up pin default configurations and add default verbs */ struct alc_pincfg { @@ -1370,9 +1370,14 @@ struct alc_pincfg { u32 val; }; -static void alc_fix_pincfg(struct hda_codec *codec, +struct alc_fixup { + const struct alc_pincfg *pins; + const struct hda_verb *verbs; +}; + +static void alc_pick_fixup(struct hda_codec *codec, const struct snd_pci_quirk *quirk, - const struct alc_pincfg **pinfix) + const struct alc_fixup *fix) { const struct alc_pincfg *cfg; @@ -1380,9 +1385,14 @@ static void alc_fix_pincfg(struct hda_codec *codec, if (!quirk) return; - cfg = pinfix[quirk->value]; - for (; cfg->nid; cfg++) - snd_hda_codec_set_pincfg(codec, cfg->nid, cfg->val); + fix += quirk->value; + cfg = fix->pins; + if (cfg) { + for (; cfg->nid; cfg++) + snd_hda_codec_set_pincfg(codec, cfg->nid, cfg->val); + } + if (fix->verbs) + add_verb(codec->spec, fix->verbs); } /* @@ -9593,11 +9603,13 @@ static struct alc_pincfg alc882_abit_aw9d_pinfix[] = { { } }; -static const struct alc_pincfg *alc882_pin_fixes[] = { - [PINFIX_ABIT_AW9D_MAX] = alc882_abit_aw9d_pinfix, +static const struct alc_fixup alc882_fixups[] = { + [PINFIX_ABIT_AW9D_MAX] = { + .pins = alc882_abit_aw9d_pinfix + }, }; -static struct snd_pci_quirk alc882_pinfix_tbl[] = { +static struct snd_pci_quirk alc882_fixup_tbl[] = { SND_PCI_QUIRK(0x147b, 0x107a, "Abit AW9D-MAX", PINFIX_ABIT_AW9D_MAX), {} }; @@ -9869,7 +9881,7 @@ static int patch_alc882(struct hda_codec *codec) board_config = ALC882_AUTO; } - alc_fix_pincfg(codec, alc882_pinfix_tbl, alc882_pin_fixes); + alc_pick_fixup(codec, alc882_fixup_tbl, alc882_fixups); if (board_config == ALC882_AUTO) { /* automatic parse from the BIOS config */ @@ -15159,7 +15171,7 @@ static struct snd_pci_quirk alc861vd_cfg_tbl[] = { SND_PCI_QUIRK(0x1019, 0xa88d, "Realtek ALC660 demo", ALC660VD_3ST), SND_PCI_QUIRK(0x103c, 0x30bf, "HP TX1000", ALC861VD_HP), SND_PCI_QUIRK(0x1043, 0x12e2, "Asus z35m", ALC660VD_3ST), - SND_PCI_QUIRK(0x1043, 0x1339, "Asus G1", ALC660VD_3ST), + /*SND_PCI_QUIRK(0x1043, 0x1339, "Asus G1", ALC660VD_3ST),*/ /* auto */ SND_PCI_QUIRK(0x1043, 0x1633, "Asus V1Sn", ALC660VD_ASUS_V1S), SND_PCI_QUIRK(0x1043, 0x81e7, "ASUS", ALC660VD_3ST_DIG), SND_PCI_QUIRK(0x10de, 0x03f0, "Realtek ALC660 demo", ALC660VD_3ST), @@ -15552,6 +15564,29 @@ static void alc861vd_auto_init(struct hda_codec *codec) alc_inithook(codec); } +enum { + ALC660VD_FIX_ASUS_GPIO1 +}; + +/* reset GPIO1 */ +static const struct hda_verb alc660vd_fix_asus_gpio1_verbs[] = { + {0x01, AC_VERB_SET_GPIO_MASK, 0x03}, + {0x01, AC_VERB_SET_GPIO_DIRECTION, 0x01}, + {0x01, AC_VERB_SET_GPIO_DATA, 0x01}, + { } +}; + +static const struct alc_fixup alc861vd_fixups[] = { + [ALC660VD_FIX_ASUS_GPIO1] = { + .verbs = alc660vd_fix_asus_gpio1_verbs, + }, +}; + +static struct snd_pci_quirk alc861vd_fixup_tbl[] = { + SND_PCI_QUIRK(0x1043, 0x1339, "ASUS A7-K", ALC660VD_FIX_ASUS_GPIO1), + {} +}; + static int patch_alc861vd(struct hda_codec *codec) { struct alc_spec *spec; @@ -15573,6 +15608,8 @@ static int patch_alc861vd(struct hda_codec *codec) board_config = ALC861VD_AUTO; } + alc_pick_fixup(codec, alc861vd_fixup_tbl, alc861vd_fixups); + if (board_config == ALC861VD_AUTO) { /* automatic parse from the BIOS config */ err = alc861vd_parse_auto_config(codec); -- cgit v1.2.1 From 01d4825df62d1d405035b90294bf38616d3f380b Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Tue, 6 Oct 2009 13:21:54 +0200 Subject: ALSA: hda - Don't pick up invalid HP pins in alc_subsystem_id() alc_subsystem_id() tries to pick up a headphone pin if not configured, but this caused side-effects as the problem in commit 15870f05e90a365f8022da416e713be0c5024e2f. This patch fixes the driver behavior to pick up invalid HP pins; at least, the pins that are listed as the primary outputs aren't taken any more. Signed-off-by: Takashi Iwai --- sound/pci/hda/patch_realtek.c | 11 ++++++++--- 1 file changed, 8 insertions(+), 3 deletions(-) (limited to 'sound/pci/hda') diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index 901c2999ed64..a61fbbb41b29 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -1332,15 +1332,20 @@ do_sku: * when the external headphone out jack is plugged" */ if (!spec->autocfg.hp_pins[0]) { + hda_nid_t nid; tmp = (ass >> 11) & 0x3; /* HP to chassis */ if (tmp == 0) - spec->autocfg.hp_pins[0] = porta; + nid = porta; else if (tmp == 1) - spec->autocfg.hp_pins[0] = porte; + nid = porte; else if (tmp == 2) - spec->autocfg.hp_pins[0] = portd; + nid = portd; else return 1; + for (i = 0; i < spec->autocfg.line_outs; i++) + if (spec->autocfg.line_out_pins[i] == nid) + return 1; + spec->autocfg.hp_pins[0] = nid; } alc_init_auto_hp(codec); -- cgit v1.2.1 From defb5ab2e0ff08ff9a942e2bb7e14c21a55ec26b Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Wed, 7 Oct 2009 15:12:27 +0200 Subject: ALSA: hda - Fix yet another auto-mic bug in ALC268 Since patch_alc268() doesn't call set_capture_mixer() (due to its h/w design different from other siblings), it needs to call fixup_automic_adc() explicitly to set up the auto-mic routing. Otherwise the indices for int/ext mics aren't set properly. Reference: Novell bnc#544899 http://bugzilla.novell.com/show_bug.cgi?id=544899 Signed-off-by: Takashi Iwai --- sound/pci/hda/patch_realtek.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) (limited to 'sound/pci/hda') diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index a61fbbb41b29..470fd74a0a1a 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -12859,12 +12859,15 @@ static int patch_alc268(struct hda_codec *codec) unsigned int wcap = get_wcaps(codec, 0x07); int i; + spec->capsrc_nids = alc268_capsrc_nids; /* get type */ wcap = get_wcaps_type(wcap); if (spec->auto_mic || wcap != AC_WID_AUD_IN || spec->input_mux->num_items == 1) { spec->adc_nids = alc268_adc_nids_alt; spec->num_adc_nids = ARRAY_SIZE(alc268_adc_nids_alt); + if (spec->auto_mic) + fixup_automic_adc(codec); if (spec->auto_mic || spec->input_mux->num_items == 1) add_mixer(spec, alc268_capture_nosrc_mixer); else @@ -12874,7 +12877,6 @@ static int patch_alc268(struct hda_codec *codec) spec->num_adc_nids = ARRAY_SIZE(alc268_adc_nids); add_mixer(spec, alc268_capture_mixer); } - spec->capsrc_nids = alc268_capsrc_nids; /* set default input source */ for (i = 0; i < spec->num_adc_nids; i++) snd_hda_codec_write_cache(codec, alc268_capsrc_nids[i], -- cgit v1.2.1 From f0613d5752d8f7d1d02e6d40947f38877fdf9c90 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Fri, 9 Oct 2009 17:44:08 +0200 Subject: ALSA: hda - Add full rates/formats support for Nvidia HDMI Allow Nvidia HDMI to support more possible sample rates and formats. At best, the really supported rates and formats should be determined together with the negotiation with the HDMI receiver, but it's currently not implemented yet (Nvidia stuff seems incompatible with HDMI 1.3 standard in this regard). As a compromise, we enable all bits, assuming that all recent devices do support such rates/formats. Tested-by: Alan Alan Signed-off-by: Takashi Iwai --- sound/pci/hda/patch_nvhdmi.c | 31 +++++++++++++++++++++++++------ 1 file changed, 25 insertions(+), 6 deletions(-) (limited to 'sound/pci/hda') diff --git a/sound/pci/hda/patch_nvhdmi.c b/sound/pci/hda/patch_nvhdmi.c index c8435c9a97f9..23ad93983118 100644 --- a/sound/pci/hda/patch_nvhdmi.c +++ b/sound/pci/hda/patch_nvhdmi.c @@ -29,6 +29,9 @@ #include "hda_codec.h" #include "hda_local.h" +/* define below to restrict the supported rates and formats */ +#define LIMITED_RATE_FMT_SUPPORT + struct nvhdmi_spec { struct hda_multi_out multiout; @@ -60,6 +63,22 @@ static struct hda_verb nvhdmi_basic_init[] = { {} /* terminator */ }; +#ifdef LIMITED_RATE_FMT_SUPPORT +/* support only the safe format and rate */ +#define SUPPORTED_RATES SNDRV_PCM_RATE_48000 +#define SUPPORTED_MAXBPS 16 +#define SUPPORTED_FORMATS SNDRV_PCM_FMTBIT_S16_LE +#else +/* support all rates and formats */ +#define SUPPORTED_RATES \ + (SNDRV_PCM_RATE_22050 | SNDRV_PCM_RATE_44100 | SNDRV_PCM_RATE_48000 |\ + SNDRV_PCM_RATE_88200 | SNDRV_PCM_RATE_96000 | SNDRV_PCM_RATE_176400 |\ + SNDRV_PCM_RATE_192000) +#define SUPPORTED_MAXBPS 24 +#define SUPPORTED_FORMATS \ + (SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_S32_LE) +#endif + /* * Controls */ @@ -258,9 +277,9 @@ static struct hda_pcm_stream nvhdmi_pcm_digital_playback_8ch = { .channels_min = 2, .channels_max = 8, .nid = Nv_Master_Convert_nid, - .rates = SNDRV_PCM_RATE_48000, - .maxbps = 16, - .formats = SNDRV_PCM_FMTBIT_S16_LE, + .rates = SUPPORTED_RATES, + .maxbps = SUPPORTED_MAXBPS, + .formats = SUPPORTED_FORMATS, .ops = { .open = nvhdmi_dig_playback_pcm_open, .close = nvhdmi_dig_playback_pcm_close_8ch, @@ -273,9 +292,9 @@ static struct hda_pcm_stream nvhdmi_pcm_digital_playback_2ch = { .channels_min = 2, .channels_max = 2, .nid = Nv_Master_Convert_nid, - .rates = SNDRV_PCM_RATE_48000, - .maxbps = 16, - .formats = SNDRV_PCM_FMTBIT_S16_LE, + .rates = SUPPORTED_RATES, + .maxbps = SUPPORTED_MAXBPS, + .formats = SUPPORTED_FORMATS, .ops = { .open = nvhdmi_dig_playback_pcm_open, .close = nvhdmi_dig_playback_pcm_close_2ch, -- cgit v1.2.1 From 2d9c648295d7bc376305337d29f540a5e411f632 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Tue, 13 Oct 2009 08:06:55 +0200 Subject: ALSA: hda - Fix overflow of spec->init_verbs in patch_realtek.c ALC861-VD lenovo model causes overflow of spec->init_verbs entries due to the recent changes. Simply increase the array size to avoid the overflow. Reported-by: Luca Tettamanti Signed-off-by: Takashi Iwai --- sound/pci/hda/patch_realtek.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'sound/pci/hda') diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index 470fd74a0a1a..c08ca660daba 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -275,7 +275,7 @@ struct alc_spec { struct snd_kcontrol_new *cap_mixer; /* capture mixer */ unsigned int beep_amp; /* beep amp value, set via set_beep_amp() */ - const struct hda_verb *init_verbs[5]; /* initialization verbs + const struct hda_verb *init_verbs[10]; /* initialization verbs * don't forget NULL * termination! */ -- cgit v1.2.1 From 54930531a00af5a1c33361a02e67dd1802110465 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Sun, 11 Oct 2009 17:38:29 +0200 Subject: ALSA: hda - Fix mute sound with STAC9227/9228 codecs On FSC laptops, the sound gets muted gradually when the volume is chnaged. This is due to the wrong volume-knob widget setup. The delta bit (bit 7) shouldn't be set for these devices. This patch adds a new quirk to set the value 0x7f to the widget 0x24 instead of 0xff. Reference: Novell bnc#546006 http://bugzilla.novell.com/show_bug.cgi?id=546006 Signed-off-by: Takashi Iwai --- sound/pci/hda/patch_sigmatel.c | 17 +++++++++++++++++ 1 file changed, 17 insertions(+) (limited to 'sound/pci/hda') diff --git a/sound/pci/hda/patch_sigmatel.c b/sound/pci/hda/patch_sigmatel.c index a9b26828a651..75736827425d 100644 --- a/sound/pci/hda/patch_sigmatel.c +++ b/sound/pci/hda/patch_sigmatel.c @@ -158,6 +158,7 @@ enum { STAC_D965_5ST_NO_FP, STAC_DELL_3ST, STAC_DELL_BIOS, + STAC_927X_VOLKNOB, STAC_927X_MODELS }; @@ -915,6 +916,14 @@ static struct hda_verb stac927x_core_init[] = { {} }; +static struct hda_verb stac927x_volknob_core_init[] = { + /* don't set delta bit */ + {0x24, AC_VERB_SET_VOLUME_KNOB_CONTROL, 0x7f}, + /* enable analog pc beep path */ + {0x01, AC_VERB_SET_DIGI_CONVERT_2, 1 << 5}, + {} +}; + static struct hda_verb stac9205_core_init[] = { /* set master volume and direct control */ { 0x24, AC_VERB_SET_VOLUME_KNOB_CONTROL, 0xff}, @@ -1999,6 +2008,7 @@ static unsigned int *stac927x_brd_tbl[STAC_927X_MODELS] = { [STAC_D965_5ST_NO_FP] = d965_5st_no_fp_pin_configs, [STAC_DELL_3ST] = dell_3st_pin_configs, [STAC_DELL_BIOS] = NULL, + [STAC_927X_VOLKNOB] = NULL, }; static const char *stac927x_models[STAC_927X_MODELS] = { @@ -2010,6 +2020,7 @@ static const char *stac927x_models[STAC_927X_MODELS] = { [STAC_D965_5ST_NO_FP] = "5stack-no-fp", [STAC_DELL_3ST] = "dell-3stack", [STAC_DELL_BIOS] = "dell-bios", + [STAC_927X_VOLKNOB] = "volknob", }; static struct snd_pci_quirk stac927x_cfg_tbl[] = { @@ -2045,6 +2056,8 @@ static struct snd_pci_quirk stac927x_cfg_tbl[] = { "Intel D965", STAC_D965_5ST), SND_PCI_QUIRK_MASK(PCI_VENDOR_ID_INTEL, 0xff00, 0x2500, "Intel D965", STAC_D965_5ST), + /* volume-knob fixes */ + SND_PCI_QUIRK_VENDOR(0x10cf, "FSC", STAC_927X_VOLKNOB), {} /* terminator */ }; @@ -5616,6 +5629,10 @@ static int patch_stac927x(struct hda_codec *codec) spec->dmux_nids = stac927x_dmux_nids; spec->num_dmuxes = ARRAY_SIZE(stac927x_dmux_nids); break; + case STAC_927X_VOLKNOB: + spec->num_dmics = 0; + spec->init = stac927x_volknob_core_init; + break; default: spec->num_dmics = 0; spec->init = stac927x_core_init; -- cgit v1.2.1 From ccca7cdc1b8dd2e7b67e9289a6abf117b11cbe6b Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Tue, 13 Oct 2009 15:32:21 +0200 Subject: ALSA: hda - Fix volume-knob setup for Dell laptops with STAC9228 The volume-knob widget needs to be set with 0x7f instead of 0xff for Dell laptops with STAC9228 codec, too, like the previous commit. Reference: Novell bnc#545013 http://bugzilla.novell.com/show_bug.cgi?id=545013 Signed-off-by: Takashi Iwai --- sound/pci/hda/patch_sigmatel.c | 12 +++++++++++- 1 file changed, 11 insertions(+), 1 deletion(-) (limited to 'sound/pci/hda') diff --git a/sound/pci/hda/patch_sigmatel.c b/sound/pci/hda/patch_sigmatel.c index 75736827425d..66c0876bf734 100644 --- a/sound/pci/hda/patch_sigmatel.c +++ b/sound/pci/hda/patch_sigmatel.c @@ -908,6 +908,16 @@ static struct hda_verb d965_core_init[] = { {} }; +static struct hda_verb dell_3st_core_init[] = { + /* don't set delta bit */ + {0x24, AC_VERB_SET_VOLUME_KNOB_CONTROL, 0x7f}, + /* unmute node 0x1b */ + {0x1b, AC_VERB_SET_AMP_GAIN_MUTE, 0xb000}, + /* select node 0x03 as DAC */ + {0x0b, AC_VERB_SET_CONNECT_SEL, 0x01}, + {} +}; + static struct hda_verb stac927x_core_init[] = { /* set master volume and direct control */ { 0x24, AC_VERB_SET_VOLUME_KNOB_CONTROL, 0xff}, @@ -5625,7 +5635,7 @@ static int patch_stac927x(struct hda_codec *codec) spec->dmic_nids = stac927x_dmic_nids; spec->num_dmics = STAC927X_NUM_DMICS; - spec->init = d965_core_init; + spec->init = dell_3st_core_init; spec->dmux_nids = stac927x_dmux_nids; spec->num_dmuxes = ARRAY_SIZE(stac927x_dmux_nids); break; -- cgit v1.2.1 From 491dc0437d4c56d11f78113eca3953cff87314f3 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Tue, 13 Oct 2009 16:07:59 +0200 Subject: ALSA: hda - Allow all formats as default for Nvidia HDMI In the commit f0613d5752d8f7d1d02e6d40947f38877fdf9c90 ALSA: hda - Add full rates/formats support for Nvidia HDMI the flag LIMITIED_RATE_FMT_SUPPORT was set as default, as I forgot to clear before commit. Let's enable all formats/rates as default. Signed-off-by: Takashi Iwai --- sound/pci/hda/patch_nvhdmi.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'sound/pci/hda') diff --git a/sound/pci/hda/patch_nvhdmi.c b/sound/pci/hda/patch_nvhdmi.c index 23ad93983118..9fb60276f5c9 100644 --- a/sound/pci/hda/patch_nvhdmi.c +++ b/sound/pci/hda/patch_nvhdmi.c @@ -30,7 +30,7 @@ #include "hda_local.h" /* define below to restrict the supported rates and formats */ -#define LIMITED_RATE_FMT_SUPPORT +/* #define LIMITED_RATE_FMT_SUPPORT */ struct nvhdmi_spec { struct hda_multi_out multiout; -- cgit v1.2.1