From 6f0b2c696ca340cc2da381fe693fda3f8fdb2149 Mon Sep 17 00:00:00 2001 From: Yadwinder Singh Brar Date: Mon, 11 Jun 2012 17:41:08 +0530 Subject: regulator: Add ramp_delay configuration to constraints For some hardwares ramp_delay for BUCKs is a configurable parameter which can be configured through DT or board file.This patch adds ramp_delay to regulator constraints and allow user to configure it for regulators which supports this feature, through DT or board file. It will provide two ways of setting the ramp_delay for a regulator: First, by setting it as constraints in board file(for configurable regulators) and set_machine_constraints() will take care of setting it on hardware by calling(the provided) .set_ramp_delay() operation(callback). Second, by setting it as data in regulator_desc(as fixed/default ramp_delay rate) for a regulator in driver. regulator_set_voltage_time_sel() will give preference to constraints->ramp_delay while reading ramp_delay rate for regulator. Similarly users should also take care accordingly while refering ramp_delay rate(in case of implementing their private .set_voltage_time_sel() callbacks for different regulators). [Rewrote subject for 80 columns -- broonie] Signed-off-by: Yadwinder Singh Brar Signed-off-by: Mark Brown --- include/linux/regulator/driver.h | 3 +++ 1 file changed, 3 insertions(+) (limited to 'include/linux/regulator/driver.h') diff --git a/include/linux/regulator/driver.h b/include/linux/regulator/driver.h index ae5c25379237..ddc155d262da 100644 --- a/include/linux/regulator/driver.h +++ b/include/linux/regulator/driver.h @@ -67,6 +67,8 @@ enum regulator_status { * * @enable_time: Time taken for the regulator voltage output voltage to * stabilise after being enabled, in microseconds. + * @set_ramp_delay: Set the ramp delay for the regulator. The driver should + * select ramp delay equal to or less than(closest) ramp_delay. * @set_voltage_time_sel: Time taken for the regulator voltage output voltage * to stabilise after being set to a new value, in microseconds. * The function provides the from and to voltage selector, the @@ -113,6 +115,7 @@ struct regulator_ops { /* Time taken to enable or set voltage on the regulator */ int (*enable_time) (struct regulator_dev *); + int (*set_ramp_delay) (struct regulator_dev *, int ramp_delay); int (*set_voltage_time_sel) (struct regulator_dev *, unsigned int old_selector, unsigned int new_selector); -- cgit v1.2.1