From 94a78b79cb5f14c09a42522738d6694c6a1cdd20 Mon Sep 17 00:00:00 2001
From: Vladislav Zolotarov <vladz@broadcom.com>
Date: Mon, 27 Apr 2009 03:27:43 -0700
Subject: bnx2x: Separated FW from the source.
>From now on FW will be downloaded from the binary file using request_firmware.
There will be different files for every supported chip. Currently 57710 (e1) and
57711 (e1h).
File names have the following format: bnx2x-<chip version>-<FW version>.fw.
ihex versions of current FW files are submitted in the next patch.
Each binary file has a header in the following format:
struct bnx2x_fw_file_section {
__be32 len;
__be32 offset;
}
struct bnx2x_fw_file_hdr {
struct bnx2x_fw_file_section init_ops;
struct bnx2x_fw_file_section init_ops_offsets;
struct bnx2x_fw_file_section init_data;
struct bnx2x_fw_file_section tsem_int_table_data;
struct bnx2x_fw_file_section tsem_pram_data;
struct bnx2x_fw_file_section usem_int_table_data;
struct bnx2x_fw_file_section usem_pram_data;
struct bnx2x_fw_file_section csem_int_table_data;
struct bnx2x_fw_file_section csem_pram_data;
struct bnx2x_fw_file_section xsem_int_table_data;
struct bnx2x_fw_file_section xsem_pram_data;
struct bnx2x_fw_file_section fw_version;
}
Each bnx2x_fw_file_section contains the length and the offset of the appropriate
section in the binary file. Values are stored in the big endian format.
Data types of arrays:
init_data __be32
init_ops_offsets __be16
XXsem_pram_data u8
XXsem_int_table_data u8
init_ops struct raw_op {
u8 op;
__be24 offset;
__be32 data;
}
fw_version u8
>From now boundaries of a specific initialization stage are stored in
init_ops_offsets array instead of being defined by separate macroes. The index
in init_ops_offsets is calculated by BLOCK_OPS_IDX macro:
#define BLOCK_OPS_IDX(block, stage, end) \
(2*(((block)*STAGE_IDX_MAX) + (stage)) + (end))
Security:
In addition to sanity check of array boundaries bnx2x will check a FW version.
Additional checks might be added in the future.
Signed-off-by: Vladislav Zolotarov <vladz@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
firmware/Makefile | 1 +
firmware/WHENCE | 20 ++++++++++++++++++++
2 files changed, 21 insertions(+)
(limited to 'firmware')
diff --git a/firmware/Makefile b/firmware/Makefile
index 25200d106ee8..1c670e0c0448 100644
--- a/firmware/Makefile
+++ b/firmware/Makefile
@@ -32,6 +32,7 @@ fw-shipped-$(CONFIG_ADAPTEC_STARFIRE) += adaptec/starfire_rx.bin \
adaptec/starfire_tx.bin
fw-shipped-$(CONFIG_ATARI_DSP56K) += dsp56k/bootstrap.bin
fw-shipped-$(CONFIG_ATM_AMBASSADOR) += atmsar11.fw
+fw-shipped-$(CONFIG_BNX2X) += bnx2x-e1-4.8.53.0.fw bnx2x-e1h-4.8.53.0.fw
fw-shipped-$(CONFIG_BNX2) += bnx2/bnx2-mips-09-4.6.17.fw \
bnx2/bnx2-rv2p-09-4.6.15.fw \
bnx2/bnx2-mips-06-4.6.16.fw \
diff --git a/firmware/WHENCE b/firmware/WHENCE
index 4c52984a8319..c1e9c5ab694c 100644
--- a/firmware/WHENCE
+++ b/firmware/WHENCE
@@ -614,6 +614,26 @@ File: myricom/lanai.bin
Licence: Unknown
+Found in hex form in kernel source.
+
+--------------------------------------------------------------------------
+
+Driver: bnx2x: Broadcom Everest
+
+File: bnx2x-e1-4.8.53.0.fw.ihex
+File: bnx2x-e1h-4.8.53.0.fw.ihex
+
+License:
+ Copyright (c) 2007-2009 Broadcom Corporation
+
+ This file contains firmware data derived from proprietary unpublished
+ source code, Copyright (c) 2007-2009 Broadcom Corporation.
+
+ Permission is hereby granted for the distribution of this firmware data
+ in hexadecimal or equivalent format, provided this copyright notice is
+ accompanying it.
+
+
Found in hex form in kernel source.
--------------------------------------------------------------------------
--
cgit v1.2.1