From ae6215576d6b2251ab8c6bbeaf1c4cea99f0481b Mon Sep 17 00:00:00 2001 From: Leonard Crestez Date: Fri, 14 Jul 2017 17:11:08 +0300 Subject: thermal: imx: Add support for reading OCOTP through nvmem On newer imx SOCs accessing OCOTP directly is wrong because the ocotp clock needs to be enabled first. Add support for reading those same values through the nvmem API instead. The older path is preserved for compatibility with older dts and because it works correctly on imx6qdl chips. Signed-off-by: Leonard Crestez Acked-by: Shawn Guo Signed-off-by: Zhang Rui --- drivers/thermal/imx_thermal.c | 104 ++++++++++++++++++++++++++++++------------ 1 file changed, 74 insertions(+), 30 deletions(-) (limited to 'drivers') diff --git a/drivers/thermal/imx_thermal.c b/drivers/thermal/imx_thermal.c index 4798b4b1fd77..e7d4ffc3de7f 100644 --- a/drivers/thermal/imx_thermal.c +++ b/drivers/thermal/imx_thermal.c @@ -25,6 +25,7 @@ #include #include #include +#include #define REG_SET 0x4 #define REG_CLR 0x8 @@ -94,7 +95,7 @@ struct imx_thermal_data { struct thermal_cooling_device *cdev; enum thermal_device_mode mode; struct regmap *tempmon; - u32 c1, c2; /* See formula in imx_get_sensor_data() */ + u32 c1, c2; /* See formula in imx_init_calib() */ int temp_passive; int temp_critical; int temp_max; @@ -177,7 +178,7 @@ static int imx_get_temp(struct thermal_zone_device *tz, int *temp) n_meas = (val & TEMPSENSE0_TEMP_CNT_MASK) >> TEMPSENSE0_TEMP_CNT_SHIFT; - /* See imx_get_sensor_data() for formula derivation */ + /* See imx_init_calib() for formula derivation */ *temp = data->c2 - n_meas * data->c1; /* Update alarm value to next higher trip point for TEMPMON_IMX6Q */ @@ -346,29 +347,12 @@ static struct thermal_zone_device_ops imx_tz_ops = { .set_trip_temp = imx_set_trip_temp, }; -static int imx_get_sensor_data(struct platform_device *pdev) +static int imx_init_calib(struct platform_device *pdev, u32 val) { struct imx_thermal_data *data = platform_get_drvdata(pdev); - struct regmap *map; int t1, n1; - int ret; - u32 val; u64 temp64; - map = syscon_regmap_lookup_by_phandle(pdev->dev.of_node, - "fsl,tempmon-data"); - if (IS_ERR(map)) { - ret = PTR_ERR(map); - dev_err(&pdev->dev, "failed to get sensor regmap: %d\n", ret); - return ret; - } - - ret = regmap_read(map, OCOTP_ANA1, &val); - if (ret) { - dev_err(&pdev->dev, "failed to read sensor data: %d\n", ret); - return ret; - } - if (val == 0 || val == ~0) { dev_err(&pdev->dev, "invalid sensor calibration data\n"); return -EINVAL; @@ -405,12 +389,12 @@ static int imx_get_sensor_data(struct platform_device *pdev) data->c1 = temp64; data->c2 = n1 * data->c1 + 1000 * t1; - /* use OTP for thermal grade */ - ret = regmap_read(map, OCOTP_MEM0, &val); - if (ret) { - dev_err(&pdev->dev, "failed to read temp grade: %d\n", ret); - return ret; - } + return 0; +} + +static void imx_init_temp_grade(struct platform_device *pdev, u32 val) +{ + struct imx_thermal_data *data = platform_get_drvdata(pdev); /* The maximum die temp is specified by the Temperature Grade */ switch ((val >> 6) & 0x3) { @@ -438,6 +422,55 @@ static int imx_get_sensor_data(struct platform_device *pdev) */ data->temp_critical = data->temp_max - (1000 * 5); data->temp_passive = data->temp_max - (1000 * 10); +} + +static int imx_init_from_tempmon_data(struct platform_device *pdev) +{ + struct regmap *map; + int ret; + u32 val; + + map = syscon_regmap_lookup_by_phandle(pdev->dev.of_node, + "fsl,tempmon-data"); + if (IS_ERR(map)) { + ret = PTR_ERR(map); + dev_err(&pdev->dev, "failed to get sensor regmap: %d\n", ret); + return ret; + } + + ret = regmap_read(map, OCOTP_ANA1, &val); + if (ret) { + dev_err(&pdev->dev, "failed to read sensor data: %d\n", ret); + return ret; + } + ret = imx_init_calib(pdev, val); + if (ret) + return ret; + + ret = regmap_read(map, OCOTP_MEM0, &val); + if (ret) { + dev_err(&pdev->dev, "failed to read sensor data: %d\n", ret); + return ret; + } + imx_init_temp_grade(pdev, val); + + return 0; +} + +static int imx_init_from_nvmem_cells(struct platform_device *pdev) +{ + int ret; + u32 val; + + ret = nvmem_cell_read_u32(&pdev->dev, "calib", &val); + if (ret) + return ret; + imx_init_calib(pdev, val); + + ret = nvmem_cell_read_u32(&pdev->dev, "temp_grade", &val); + if (ret) + return ret; + imx_init_temp_grade(pdev, val); return 0; } @@ -514,10 +547,21 @@ static int imx_thermal_probe(struct platform_device *pdev) platform_set_drvdata(pdev, data); - ret = imx_get_sensor_data(pdev); - if (ret) { - dev_err(&pdev->dev, "failed to get sensor data\n"); - return ret; + if (of_find_property(pdev->dev.of_node, "nvmem-cells", NULL)) { + ret = imx_init_from_nvmem_cells(pdev); + if (ret == -EPROBE_DEFER) + return ret; + if (ret) { + dev_err(&pdev->dev, "failed to init from nvmem: %d\n", + ret); + return ret; + } + } else { + ret = imx_init_from_tempmon_data(pdev); + if (ret) { + dev_err(&pdev->dev, "failed to init from from fsl,tempmon-data\n"); + return ret; + } } /* Make sure sensor is in known good state for measurements */ -- cgit v1.2.1 From d344f3138a473b99f09041a1e6ece9f3b8953858 Mon Sep 17 00:00:00 2001 From: Arvind Yadav Date: Mon, 9 Oct 2017 17:21:07 +0530 Subject: thermal/intel_powerclamp: pr_err()/pr_info() strings should end with newlines pr_err()/pr_info() messages should end with a new-line to avoid other messages being concatenated. Signed-off-by: Arvind Yadav Signed-off-by: Zhang Rui --- drivers/thermal/intel_powerclamp.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/thermal/intel_powerclamp.c b/drivers/thermal/intel_powerclamp.c index d718cd179ddb..4540e892b61d 100644 --- a/drivers/thermal/intel_powerclamp.c +++ b/drivers/thermal/intel_powerclamp.c @@ -675,13 +675,13 @@ static int __init powerclamp_probe(void) { if (!x86_match_cpu(intel_powerclamp_ids)) { - pr_err("CPU does not support MWAIT"); + pr_err("CPU does not support MWAIT\n"); return -ENODEV; } /* The goal for idle time alignment is to achieve package cstate. */ if (!has_pkg_state_counter()) { - pr_info("No package C-state available"); + pr_info("No package C-state available\n"); return -ENODEV; } -- cgit v1.2.1 From 531fcdeb71f0be1d4c77838b1a4694c317b1eb98 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Mon, 18 Sep 2017 22:48:16 +0200 Subject: thermal: imx: add NVMEM dependency The driver now fails to link into vmlinux when CONFIG_NVMEM is a loadable module: drivers/thermal/imx_thermal.o: In function `imx_thermal_probe': imx_thermal.c:(.text+0x360): undefined reference to `nvmem_cell_read_u32' imx_thermal.c:(.text+0x360): relocation truncated to fit: R_AARCH64_CALL26 against undefined symbol `nvmem_cell_read_u32' imx_thermal.c:(.text+0x388): undefined reference to `nvmem_cell_read_u32' imx_thermal.c:(.text+0x388): relocation truncated to fit: R_AARCH64_CALL26 against undefined symbol `nvmem_cell_read_u32' This adds a Kconfig dependency to force it to be a module as well when its dependency is loadable. Fixes: 7fe5ba04fcdc ("thermal: imx: Add support for reading OCOTP through nvmem") Signed-off-by: Arnd Bergmann Reviewed-by: Leonard Crestez Signed-off-by: Zhang Rui --- drivers/thermal/Kconfig | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/thermal/Kconfig b/drivers/thermal/Kconfig index 07002df4f83a..cb14f1ec5953 100644 --- a/drivers/thermal/Kconfig +++ b/drivers/thermal/Kconfig @@ -206,6 +206,7 @@ config HISI_THERMAL config IMX_THERMAL tristate "Temperature sensor driver for Freescale i.MX SoCs" depends on (ARCH_MXC && CPU_THERMAL) || COMPILE_TEST + depends on NVMEM || !NVMEM depends on MFD_SYSCON depends on OF help -- cgit v1.2.1 From 4eca8cac256a9557f9e1295147df8135c0b3540f Mon Sep 17 00:00:00 2001 From: Rocky Hao Date: Thu, 24 Aug 2017 18:27:52 +0800 Subject: thermal: rockchip: Support the RV1108 SoC in thermal driver RV1108 SOC has one Temperature Sensor for CPU. Reviewed-by: Caesar Wang Signed-off-by: Rocky Hao Signed-off-by: Eduardo Valentin --- drivers/thermal/rockchip_thermal.c | 67 ++++++++++++++++++++++++++++++++++++++ 1 file changed, 67 insertions(+) (limited to 'drivers') diff --git a/drivers/thermal/rockchip_thermal.c b/drivers/thermal/rockchip_thermal.c index 206035139110..f36375d5a16c 100644 --- a/drivers/thermal/rockchip_thermal.c +++ b/drivers/thermal/rockchip_thermal.c @@ -242,6 +242,45 @@ struct tsadc_table { int temp; }; +static const struct tsadc_table rv1108_table[] = { + {0, -40000}, + {374, -40000}, + {382, -35000}, + {389, -30000}, + {397, -25000}, + {405, -20000}, + {413, -15000}, + {421, -10000}, + {429, -5000}, + {436, 0}, + {444, 5000}, + {452, 10000}, + {460, 15000}, + {468, 20000}, + {476, 25000}, + {483, 30000}, + {491, 35000}, + {499, 40000}, + {507, 45000}, + {515, 50000}, + {523, 55000}, + {531, 60000}, + {539, 65000}, + {547, 70000}, + {555, 75000}, + {562, 80000}, + {570, 85000}, + {578, 90000}, + {586, 95000}, + {594, 100000}, + {602, 105000}, + {610, 110000}, + {618, 115000}, + {626, 120000}, + {634, 125000}, + {TSADCV2_DATA_MASK, 125000}, +}; + static const struct tsadc_table rk3228_code_table[] = { {0, -40000}, {588, -40000}, @@ -779,6 +818,30 @@ static void rk_tsadcv2_tshut_mode(int chn, void __iomem *regs, writel_relaxed(val, regs + TSADCV2_INT_EN); } +static const struct rockchip_tsadc_chip rv1108_tsadc_data = { + .chn_id[SENSOR_CPU] = 0, /* cpu sensor is channel 0 */ + .chn_num = 1, /* one channel for tsadc */ + + .tshut_mode = TSHUT_MODE_GPIO, /* default TSHUT via GPIO give PMIC */ + .tshut_polarity = TSHUT_LOW_ACTIVE, /* default TSHUT LOW ACTIVE */ + .tshut_temp = 95000, + + .initialize = rk_tsadcv2_initialize, + .irq_ack = rk_tsadcv3_irq_ack, + .control = rk_tsadcv3_control, + .get_temp = rk_tsadcv2_get_temp, + .set_alarm_temp = rk_tsadcv2_alarm_temp, + .set_tshut_temp = rk_tsadcv2_tshut_temp, + .set_tshut_mode = rk_tsadcv2_tshut_mode, + + .table = { + .id = rv1108_table, + .length = ARRAY_SIZE(rv1108_table), + .data_mask = TSADCV2_DATA_MASK, + .mode = ADC_INCREMENT, + }, +}; + static const struct rockchip_tsadc_chip rk3228_tsadc_data = { .chn_id[SENSOR_CPU] = 0, /* cpu sensor is channel 0 */ .chn_num = 1, /* one channel for tsadc */ @@ -927,6 +990,10 @@ static const struct rockchip_tsadc_chip rk3399_tsadc_data = { }; static const struct of_device_id of_rockchip_thermal_match[] = { + { + .compatible = "rockchip,rv1108-tsadc", + .data = (void *)&rv1108_tsadc_data, + }, { .compatible = "rockchip,rk3228-tsadc", .data = (void *)&rk3228_tsadc_data, -- cgit v1.2.1 From fec3624f0bcdb6b20ef9ccf9d9d55d0d75d776f8 Mon Sep 17 00:00:00 2001 From: Allen Wild Date: Tue, 26 Sep 2017 19:37:44 +0200 Subject: thermal: enable broadcom menu for arm64 bcm2835 Moving the bcm2835 thermal driver to the broadcom directory prevented it from getting enabled for arm64 builds, since the broadcom directory is only available when 32-bit specific ARCH_BCM is set. Fix this by enabling the Broadcom menu for ARCH_BCM or ARCH_BCM2835. Fixes: 6892cf07e733 ("thermal: bcm2835: move to the broadcom subdirectory") Reviewed-by: Eric Anholt Signed-off-by: Allen Wild Signed-off-by: Stefan Wahren Signed-off-by: Eduardo Valentin --- drivers/thermal/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/thermal/Kconfig b/drivers/thermal/Kconfig index 07002df4f83a..e3f0d1fd1720 100644 --- a/drivers/thermal/Kconfig +++ b/drivers/thermal/Kconfig @@ -408,7 +408,7 @@ config MTK_THERMAL controller present in Mediatek SoCs menu "Broadcom thermal drivers" -depends on ARCH_BCM || COMPILE_TEST +depends on ARCH_BCM || ARCH_BCM2835 || COMPILE_TEST source "drivers/thermal/broadcom/Kconfig" endmenu -- cgit v1.2.1 From 1fba81cc09bd3cd71ca43cd66ca7223217eaa054 Mon Sep 17 00:00:00 2001 From: Nicolin Chen Date: Tue, 5 Sep 2017 00:41:16 -0700 Subject: thermal: tegra: remove null check for dev pointer The dev pointer is going through a null check after a dereference. So this patch removes that useless check since the driver does not pass a null dev pointer in any case. Signed-off-by: Nicolin Chen Signed-off-by: Eduardo Valentin --- drivers/thermal/tegra/soctherm.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/thermal/tegra/soctherm.c b/drivers/thermal/tegra/soctherm.c index 7d2db23d71a3..075db1de5e53 100644 --- a/drivers/thermal/tegra/soctherm.c +++ b/drivers/thermal/tegra/soctherm.c @@ -483,7 +483,7 @@ static int throttrip_program(struct device *dev, unsigned int throt; u32 r, reg_off; - if (!dev || !sg || !stc || !stc->init) + if (!sg || !stc || !stc->init) return -EINVAL; temp = enforce_temp_range(dev, trip_temp) / ts->soc->thresh_grain; -- cgit v1.2.1 From 0cf3a1ac3e10a5920531e38cf2ae99fa1e4d45a2 Mon Sep 17 00:00:00 2001 From: Baruch Siach Date: Thu, 14 Sep 2017 18:06:57 +0300 Subject: thermal: armada: fix formula documentation comment The formula implementation at armada_get_temp() indicates that the sign in the formula is inverted. Cc: Ezequiel Garcia Signed-off-by: Baruch Siach Signed-off-by: Eduardo Valentin --- drivers/thermal/armada_thermal.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/thermal/armada_thermal.c b/drivers/thermal/armada_thermal.c index ae75328945f7..706d74798cbe 100644 --- a/drivers/thermal/armada_thermal.c +++ b/drivers/thermal/armada_thermal.c @@ -58,7 +58,7 @@ struct armada_thermal_data { /* Test for a valid sensor value (optional) */ bool (*is_valid)(struct armada_thermal_priv *); - /* Formula coeficients: temp = (b + m * reg) / div */ + /* Formula coeficients: temp = (b - m * reg) / div */ unsigned long coef_b; unsigned long coef_m; unsigned long coef_div; -- cgit v1.2.1 From d668c807aa6ef3c3eef57b4e9e785ec0cfab4f6d Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Niklas=20S=C3=B6derlund?= Date: Tue, 17 Oct 2017 13:36:13 +0200 Subject: thermal: rcar_gen3_thermal: fix initialization sequence for H3 ES2.0 MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The initialization sequence for H3 (r8a7795) ES1.x and ES2.0 is different. H3 ES2.0 and later uses the same sequence as M3 (r8a7796) ES1.0. Fix this by not looking at compatible strings and instead defaulting to the r8a7796 initialization sequence and use soc_device_match() to check for H3 ES1.x. Signed-off-by: Niklas Söderlund Reviewed-by: Geert Uytterhoeven Acked-by: Wolfram Sang Signed-off-by: Eduardo Valentin --- drivers/thermal/rcar_gen3_thermal.c | 34 +++++++++++++++------------------- 1 file changed, 15 insertions(+), 19 deletions(-) (limited to 'drivers') diff --git a/drivers/thermal/rcar_gen3_thermal.c b/drivers/thermal/rcar_gen3_thermal.c index 203aca44a2bb..561a0a332208 100644 --- a/drivers/thermal/rcar_gen3_thermal.c +++ b/drivers/thermal/rcar_gen3_thermal.c @@ -24,6 +24,7 @@ #include #include #include +#include #include #include "thermal_core.h" @@ -90,10 +91,6 @@ struct rcar_gen3_thermal_priv { struct rcar_gen3_thermal_tsc *tscs[TSC_MAX_NUM]; unsigned int num_tscs; spinlock_t lock; /* Protect interrupts on and off */ - const struct rcar_gen3_thermal_data *data; -}; - -struct rcar_gen3_thermal_data { void (*thermal_init)(struct rcar_gen3_thermal_tsc *tsc); }; @@ -278,7 +275,12 @@ static irqreturn_t rcar_gen3_thermal_irq_thread(int irq, void *data) return IRQ_HANDLED; } -static void r8a7795_thermal_init(struct rcar_gen3_thermal_tsc *tsc) +static const struct soc_device_attribute r8a7795es1[] = { + { .soc_id = "r8a7795", .revision = "ES1.*" }, + { /* sentinel */ } +}; + +static void rcar_gen3_thermal_init_r8a7795es1(struct rcar_gen3_thermal_tsc *tsc) { rcar_gen3_thermal_write(tsc, REG_GEN3_CTSR, CTSR_THBGR); rcar_gen3_thermal_write(tsc, REG_GEN3_CTSR, 0x0); @@ -303,7 +305,7 @@ static void r8a7795_thermal_init(struct rcar_gen3_thermal_tsc *tsc) usleep_range(1000, 2000); } -static void r8a7796_thermal_init(struct rcar_gen3_thermal_tsc *tsc) +static void rcar_gen3_thermal_init(struct rcar_gen3_thermal_tsc *tsc) { u32 reg_val; @@ -324,17 +326,9 @@ static void r8a7796_thermal_init(struct rcar_gen3_thermal_tsc *tsc) usleep_range(1000, 2000); } -static const struct rcar_gen3_thermal_data r8a7795_data = { - .thermal_init = r8a7795_thermal_init, -}; - -static const struct rcar_gen3_thermal_data r8a7796_data = { - .thermal_init = r8a7796_thermal_init, -}; - static const struct of_device_id rcar_gen3_thermal_dt_ids[] = { - { .compatible = "renesas,r8a7795-thermal", .data = &r8a7795_data}, - { .compatible = "renesas,r8a7796-thermal", .data = &r8a7796_data}, + { .compatible = "renesas,r8a7795-thermal", }, + { .compatible = "renesas,r8a7796-thermal", }, {}, }; MODULE_DEVICE_TABLE(of, rcar_gen3_thermal_dt_ids); @@ -371,7 +365,9 @@ static int rcar_gen3_thermal_probe(struct platform_device *pdev) if (!priv) return -ENOMEM; - priv->data = of_device_get_match_data(dev); + priv->thermal_init = rcar_gen3_thermal_init; + if (soc_device_match(r8a7795es1)) + priv->thermal_init = rcar_gen3_thermal_init_r8a7795es1; spin_lock_init(&priv->lock); @@ -423,7 +419,7 @@ static int rcar_gen3_thermal_probe(struct platform_device *pdev) priv->tscs[i] = tsc; - priv->data->thermal_init(tsc); + priv->thermal_init(tsc); rcar_gen3_thermal_calc_coefs(&tsc->coef, ptat, thcode[i]); zone = devm_thermal_zone_of_sensor_register(dev, i, tsc, @@ -476,7 +472,7 @@ static int __maybe_unused rcar_gen3_thermal_resume(struct device *dev) for (i = 0; i < priv->num_tscs; i++) { struct rcar_gen3_thermal_tsc *tsc = priv->tscs[i]; - priv->data->thermal_init(tsc); + priv->thermal_init(tsc); rcar_gen3_thermal_set_trips(tsc, tsc->low, tsc->high); } -- cgit v1.2.1 From ba817a8cfc2e128b59af7fe8b6af72ed38763b87 Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Mon, 16 Oct 2017 14:07:14 -0700 Subject: thermal: ti-soc-thermal: Fix ti_thermal_unregister_cpu_cooling NULL pointer on unload While debugging some PM issues and trying to remove all the loaded modules, I ran across the following when unloading ti-soc-thermal: Unable to handle kernel NULL pointer dereference at virtual address 000000b4 ... [] (kobject_put) from [] (ti_thermal_unregister_cpu_cooling+0x20/0x28 [ti_soc_thermal]) [] (ti_thermal_unregister_cpu_cooling [ti_soc_thermal]) from [] (ti_bandgap_remove+0x3c/0x104 [ti_soc_thermal]) [] (ti_bandgap_remove [ti_soc_thermal]) from [] (platform_drv_remove+0x24/0x3c) [] (platform_drv_remove) from [] (device_release_driver_internal+0x160/0x208) [] (device_release_driver_internal) from [] (driver_detach+0x38/0x6c) [] (driver_detach) from [] (bus_remove_driver+0x4c/0xa0) [] (bus_remove_driver) from [] (SyS_delete_module+0x168/0x238) [] (SyS_delete_module) from [] (ret_fast_syscall+0x0/0x28) Cc: Keerthy Signed-off-by: Tony Lindgren Signed-off-by: Eduardo Valentin --- drivers/thermal/ti-soc-thermal/ti-thermal-common.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/thermal/ti-soc-thermal/ti-thermal-common.c b/drivers/thermal/ti-soc-thermal/ti-thermal-common.c index c211a8e4a210..b4f981daeaf2 100644 --- a/drivers/thermal/ti-soc-thermal/ti-thermal-common.c +++ b/drivers/thermal/ti-soc-thermal/ti-thermal-common.c @@ -278,7 +278,8 @@ int ti_thermal_unregister_cpu_cooling(struct ti_bandgap *bgp, int id) if (data) { cpufreq_cooling_unregister(data->cool_dev); - cpufreq_cpu_put(data->policy); + if (data->policy) + cpufreq_cpu_put(data->policy); } return 0; -- cgit v1.2.1 From c176b10b025acee4dc8f2ab1cd64eb73b5ccef53 Mon Sep 17 00:00:00 2001 From: Daniel Lezcano Date: Thu, 19 Oct 2017 19:05:43 +0200 Subject: thermal/drivers/hisi: Fix missing interrupt enablement The interrupt for the temperature threshold is not enabled at the end of the probe function, enable it after the setup is complete. On the other side, the irq_enabled is not correctly set as we are checking if the interrupt is masked where 'yes' means irq_enabled=false. irq_get_irqchip_state(data->irq, IRQCHIP_STATE_MASKED, &data->irq_enabled); As we are always enabling the interrupt, it is pointless to check if the interrupt is masked or not, just set irq_enabled to 'true'. Signed-off-by: Daniel Lezcano Reviewed-by: Leo Yan Tested-by: Leo Yan Signed-off-by: Eduardo Valentin --- drivers/thermal/hisi_thermal.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/thermal/hisi_thermal.c b/drivers/thermal/hisi_thermal.c index bd3572c41585..8381696241d6 100644 --- a/drivers/thermal/hisi_thermal.c +++ b/drivers/thermal/hisi_thermal.c @@ -345,8 +345,7 @@ static int hisi_thermal_probe(struct platform_device *pdev) } hisi_thermal_enable_bind_irq_sensor(data); - irq_get_irqchip_state(data->irq, IRQCHIP_STATE_MASKED, - &data->irq_enabled); + data->irq_enabled = true; for (i = 0; i < HISI_MAX_SENSORS; ++i) { ret = hisi_thermal_register_sensor(pdev, data, @@ -358,6 +357,8 @@ static int hisi_thermal_probe(struct platform_device *pdev) hisi_thermal_toggle_sensor(&data->sensors[i], true); } + enable_irq(data->irq); + return 0; } -- cgit v1.2.1 From ff4ec2997df8fe7cc40513dbe5f86d9f88fb6be7 Mon Sep 17 00:00:00 2001 From: Daniel Lezcano Date: Thu, 19 Oct 2017 19:05:44 +0200 Subject: thermal/drivers/hisi: Remove the multiple sensors support By essence, the tsensor does not really support multiple sensor at the same time. It allows to set a sensor and use it to get the temperature, another sensor could be switched but with a delay of 3-5ms. It is difficult to read simultaneously several sensors without a big delay. Today, just one sensor is used, it is not necessary to deal with multiple sensors in the code. Remove them and if it is needed in the future add them on top of a code which will be clean up in the meantime. Signed-off-by: Daniel Lezcano Reviewed-by: Leo Yan Acked-by: Wangtao (Kevin, Kirin) Signed-off-by: Eduardo Valentin --- drivers/thermal/hisi_thermal.c | 75 +++++++++++------------------------------- 1 file changed, 19 insertions(+), 56 deletions(-) (limited to 'drivers') diff --git a/drivers/thermal/hisi_thermal.c b/drivers/thermal/hisi_thermal.c index 8381696241d6..725d0d434d83 100644 --- a/drivers/thermal/hisi_thermal.c +++ b/drivers/thermal/hisi_thermal.c @@ -39,6 +39,7 @@ #define HISI_TEMP_RESET (100000) #define HISI_MAX_SENSORS 4 +#define HISI_DEFAULT_SENSOR 2 struct hisi_thermal_sensor { struct hisi_thermal_data *thermal; @@ -53,9 +54,8 @@ struct hisi_thermal_data { struct mutex thermal_lock; /* protects register data */ struct platform_device *pdev; struct clk *clk; - struct hisi_thermal_sensor sensors[HISI_MAX_SENSORS]; - - int irq, irq_bind_sensor; + struct hisi_thermal_sensor sensors; + int irq; bool irq_enabled; void __iomem *regs; @@ -113,7 +113,7 @@ static void hisi_thermal_enable_bind_irq_sensor mutex_lock(&data->thermal_lock); - sensor = &data->sensors[data->irq_bind_sensor]; + sensor = &data->sensors; /* setting the hdak time */ writel(0x0, data->regs + TEMP0_CFG); @@ -160,31 +160,8 @@ static int hisi_thermal_get_temp(void *_sensor, int *temp) struct hisi_thermal_sensor *sensor = _sensor; struct hisi_thermal_data *data = sensor->thermal; - int sensor_id = -1, i; - long max_temp = 0; - *temp = hisi_thermal_get_sensor_temp(data, sensor); - sensor->sensor_temp = *temp; - - for (i = 0; i < HISI_MAX_SENSORS; i++) { - if (!data->sensors[i].tzd) - continue; - - if (data->sensors[i].sensor_temp >= max_temp) { - max_temp = data->sensors[i].sensor_temp; - sensor_id = i; - } - } - - /* If no sensor has been enabled, then skip to enable irq */ - if (sensor_id == -1) - return 0; - - mutex_lock(&data->thermal_lock); - data->irq_bind_sensor = sensor_id; - mutex_unlock(&data->thermal_lock); - dev_dbg(&data->pdev->dev, "id=%d, irq=%d, temp=%d, thres=%d\n", sensor->id, data->irq_enabled, *temp, sensor->thres_temp); /* @@ -197,7 +174,7 @@ static int hisi_thermal_get_temp(void *_sensor, int *temp) return 0; } - if (max_temp < sensor->thres_temp) { + if (*temp < sensor->thres_temp) { data->irq_enabled = true; hisi_thermal_enable_bind_irq_sensor(data); enable_irq(data->irq); @@ -224,22 +201,16 @@ static irqreturn_t hisi_thermal_alarm_irq_thread(int irq, void *dev) { struct hisi_thermal_data *data = dev; struct hisi_thermal_sensor *sensor; - int i; mutex_lock(&data->thermal_lock); - sensor = &data->sensors[data->irq_bind_sensor]; + sensor = &data->sensors; dev_crit(&data->pdev->dev, "THERMAL ALARM: T > %d\n", sensor->thres_temp / 1000); mutex_unlock(&data->thermal_lock); - for (i = 0; i < HISI_MAX_SENSORS; i++) { - if (!data->sensors[i].tzd) - continue; - - thermal_zone_device_update(data->sensors[i].tzd, - THERMAL_EVENT_UNSPECIFIED); - } + thermal_zone_device_update(data->sensors.tzd, + THERMAL_EVENT_UNSPECIFIED); return IRQ_HANDLED; } @@ -296,7 +267,6 @@ static int hisi_thermal_probe(struct platform_device *pdev) { struct hisi_thermal_data *data; struct resource *res; - int i; int ret; data = devm_kzalloc(&pdev->dev, sizeof(*data), GFP_KERNEL); @@ -347,16 +317,17 @@ static int hisi_thermal_probe(struct platform_device *pdev) hisi_thermal_enable_bind_irq_sensor(data); data->irq_enabled = true; - for (i = 0; i < HISI_MAX_SENSORS; ++i) { - ret = hisi_thermal_register_sensor(pdev, data, - &data->sensors[i], i); - if (ret) - dev_err(&pdev->dev, - "failed to register thermal sensor: %d\n", ret); - else - hisi_thermal_toggle_sensor(&data->sensors[i], true); + ret = hisi_thermal_register_sensor(pdev, data, + &data->sensors, + HISI_DEFAULT_SENSOR); + if (ret) { + dev_err(&pdev->dev, "failed to register thermal sensor: %d\n", + ret); + return ret; } + hisi_thermal_toggle_sensor(&data->sensors, true); + enable_irq(data->irq); return 0; @@ -365,17 +336,9 @@ static int hisi_thermal_probe(struct platform_device *pdev) static int hisi_thermal_remove(struct platform_device *pdev) { struct hisi_thermal_data *data = platform_get_drvdata(pdev); - int i; - - for (i = 0; i < HISI_MAX_SENSORS; i++) { - struct hisi_thermal_sensor *sensor = &data->sensors[i]; - - if (!sensor->tzd) - continue; - - hisi_thermal_toggle_sensor(sensor, false); - } + struct hisi_thermal_sensor *sensor = &data->sensors; + hisi_thermal_toggle_sensor(sensor, false); hisi_thermal_disable_sensor(data); clk_disable_unprepare(data->clk); -- cgit v1.2.1 From 2cb4de785c40d4a2132cfc13e63828f5a28c3351 Mon Sep 17 00:00:00 2001 From: Daniel Lezcano Date: Thu, 19 Oct 2017 19:05:45 +0200 Subject: thermal/drivers/hisi: Fix kernel panic on alarm interrupt The threaded interrupt for the alarm interrupt is requested before the temperature controller is setup. This one can fire an interrupt immediately leading to a kernel panic as the sensor data is not initialized. In order to prevent that, move the threaded irq after the Tsensor is setup. Signed-off-by: Daniel Lezcano Reviewed-by: Leo Yan Tested-by: Leo Yan Signed-off-by: Eduardo Valentin --- drivers/thermal/hisi_thermal.c | 18 +++++++++--------- 1 file changed, 9 insertions(+), 9 deletions(-) (limited to 'drivers') diff --git a/drivers/thermal/hisi_thermal.c b/drivers/thermal/hisi_thermal.c index 725d0d434d83..f69aea0b2fe3 100644 --- a/drivers/thermal/hisi_thermal.c +++ b/drivers/thermal/hisi_thermal.c @@ -287,15 +287,6 @@ static int hisi_thermal_probe(struct platform_device *pdev) if (data->irq < 0) return data->irq; - ret = devm_request_threaded_irq(&pdev->dev, data->irq, - hisi_thermal_alarm_irq, - hisi_thermal_alarm_irq_thread, - 0, "hisi_thermal", data); - if (ret < 0) { - dev_err(&pdev->dev, "failed to request alarm irq: %d\n", ret); - return ret; - } - platform_set_drvdata(pdev, data); data->clk = devm_clk_get(&pdev->dev, "thermal_clk"); @@ -328,6 +319,15 @@ static int hisi_thermal_probe(struct platform_device *pdev) hisi_thermal_toggle_sensor(&data->sensors, true); + ret = devm_request_threaded_irq(&pdev->dev, data->irq, + hisi_thermal_alarm_irq, + hisi_thermal_alarm_irq_thread, + 0, "hisi_thermal", data); + if (ret < 0) { + dev_err(&pdev->dev, "failed to request alarm irq: %d\n", ret); + return ret; + } + enable_irq(data->irq); return 0; -- cgit v1.2.1 From 48880b979cdc9ef5a70af020f42b8ba1e51dbd34 Mon Sep 17 00:00:00 2001 From: Daniel Lezcano Date: Thu, 19 Oct 2017 19:05:46 +0200 Subject: thermal/drivers/hisi: Simplify the temperature/step computation The step and the base temperature are fixed values, we can simplify the computation by converting the base temperature to milli celsius and use a pre-computed step value. That saves us a lot of mult + div for nothing at runtime. Take also the opportunity to change the function names to be consistent with the rest of the code. Signed-off-by: Daniel Lezcano Reviewed-by: Leo Yan Tested-by: Leo Yan Signed-off-by: Eduardo Valentin --- drivers/thermal/hisi_thermal.c | 41 ++++++++++++++++++++++++++++------------- 1 file changed, 28 insertions(+), 13 deletions(-) (limited to 'drivers') diff --git a/drivers/thermal/hisi_thermal.c b/drivers/thermal/hisi_thermal.c index f69aea0b2fe3..583bc1934127 100644 --- a/drivers/thermal/hisi_thermal.c +++ b/drivers/thermal/hisi_thermal.c @@ -35,8 +35,9 @@ #define TEMP0_RST_MSK (0x1C) #define TEMP0_VALUE (0x28) -#define HISI_TEMP_BASE (-60) +#define HISI_TEMP_BASE (-60000) #define HISI_TEMP_RESET (100000) +#define HISI_TEMP_STEP (784) #define HISI_MAX_SENSORS 4 #define HISI_DEFAULT_SENSOR 2 @@ -61,19 +62,32 @@ struct hisi_thermal_data { void __iomem *regs; }; -/* in millicelsius */ -static inline int _step_to_temp(int step) +/* + * The temperature computation on the tsensor is as follow: + * Unit: millidegree Celsius + * Step: 255/200 (0.7843) + * Temperature base: -60°C + * + * The register is programmed in temperature steps, every step is 784 + * millidegree and begins at -60 000 m°C + * + * The temperature from the steps: + * + * Temp = TempBase + (steps x 784) + * + * and the steps from the temperature: + * + * steps = (Temp - TempBase) / 784 + * + */ +static inline int hisi_thermal_step_to_temp(int step) { - /* - * Every step equals (1 * 200) / 255 celsius, and finally - * need convert to millicelsius. - */ - return (HISI_TEMP_BASE * 1000 + (step * 200000 / 255)); + return HISI_TEMP_BASE + (step * HISI_TEMP_STEP); } -static inline long _temp_to_step(long temp) +static inline long hisi_thermal_temp_to_step(long temp) { - return ((temp - HISI_TEMP_BASE * 1000) * 255) / 200000; + return (temp - HISI_TEMP_BASE) / HISI_TEMP_STEP; } static long hisi_thermal_get_sensor_temp(struct hisi_thermal_data *data, @@ -99,7 +113,7 @@ static long hisi_thermal_get_sensor_temp(struct hisi_thermal_data *data, usleep_range(3000, 5000); val = readl(data->regs + TEMP0_VALUE); - val = _step_to_temp(val); + val = hisi_thermal_step_to_temp(val); mutex_unlock(&data->thermal_lock); @@ -126,10 +140,11 @@ static void hisi_thermal_enable_bind_irq_sensor writel((sensor->id << 12), data->regs + TEMP0_CFG); /* enable for interrupt */ - writel(_temp_to_step(sensor->thres_temp) | 0x0FFFFFF00, + writel(hisi_thermal_temp_to_step(sensor->thres_temp) | 0x0FFFFFF00, data->regs + TEMP0_TH); - writel(_temp_to_step(HISI_TEMP_RESET), data->regs + TEMP0_RST_TH); + writel(hisi_thermal_temp_to_step(HISI_TEMP_RESET), + data->regs + TEMP0_RST_TH); /* enable module */ writel(0x1, data->regs + TEMP0_RST_MSK); -- cgit v1.2.1 From db2b0332608c8e648ea1e44727d36ad37cdb56cb Mon Sep 17 00:00:00 2001 From: Daniel Lezcano Date: Thu, 19 Oct 2017 19:05:47 +0200 Subject: thermal/drivers/hisi: Fix multiple alarm interrupts firing The DT specifies a threshold of 65000, we setup the register with a value in the temperature resolution for the controller, 64656. When we reach 64656, the interrupt fires, the interrupt is disabled. Then the irq thread runs and calls thermal_zone_device_update() which will call in turn hisi_thermal_get_temp(). The function will look if the temperature decreased, assuming it was more than 65000, but that is not the case because the current temperature is 64656 (because of the rounding when setting the threshold). This condition being true, we re-enable the interrupt which fires immediately after exiting the irq thread. That happens again and again until the temperature goes to more than 65000. Potentially, there is here an interrupt storm if the temperature stabilizes at this temperature. A very unlikely case but possible. In any case, it does not make sense to handle dozens of alarm interrupt for nothing. Fix this by rounding the threshold value to the controller resolution so the check against the threshold is consistent with the one set in the controller. Signed-off-by: Daniel Lezcano Reviewed-by: Leo Yan Tested-by: Leo Yan Signed-off-by: Eduardo Valentin --- drivers/thermal/hisi_thermal.c | 10 ++++++++-- 1 file changed, 8 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/thermal/hisi_thermal.c b/drivers/thermal/hisi_thermal.c index 583bc1934127..f5231974504c 100644 --- a/drivers/thermal/hisi_thermal.c +++ b/drivers/thermal/hisi_thermal.c @@ -90,6 +90,12 @@ static inline long hisi_thermal_temp_to_step(long temp) return (temp - HISI_TEMP_BASE) / HISI_TEMP_STEP; } +static inline long hisi_thermal_round_temp(int temp) +{ + return hisi_thermal_step_to_temp( + hisi_thermal_temp_to_step(temp)); +} + static long hisi_thermal_get_sensor_temp(struct hisi_thermal_data *data, struct hisi_thermal_sensor *sensor) { @@ -221,7 +227,7 @@ static irqreturn_t hisi_thermal_alarm_irq_thread(int irq, void *dev) sensor = &data->sensors; dev_crit(&data->pdev->dev, "THERMAL ALARM: T > %d\n", - sensor->thres_temp / 1000); + sensor->thres_temp); mutex_unlock(&data->thermal_lock); thermal_zone_device_update(data->sensors.tzd, @@ -255,7 +261,7 @@ static int hisi_thermal_register_sensor(struct platform_device *pdev, for (i = 0; i < of_thermal_get_ntrips(sensor->tzd); i++) { if (trip[i].type == THERMAL_TRIP_PASSIVE) { - sensor->thres_temp = trip[i].temperature; + sensor->thres_temp = hisi_thermal_round_temp(trip[i].temperature); break; } } -- cgit v1.2.1 From 2d4fa7b4c6f8080ced2e8237c9f46fb1fc110d64 Mon Sep 17 00:00:00 2001 From: Daniel Lezcano Date: Thu, 19 Oct 2017 19:05:48 +0200 Subject: thermal/drivers/hisi: Remove pointless lock The threaded interrupt inspect the sensors structure to look in the temp threshold field, but this field is read-only in all the code, except in the probe function before the threaded interrupt is set. In other words there is not race window in the threaded interrupt when reading the field value. Signed-off-by: Daniel Lezcano Reviewed-by: Leo Yan Signed-off-by: Eduardo Valentin --- drivers/thermal/hisi_thermal.c | 6 +----- 1 file changed, 1 insertion(+), 5 deletions(-) (limited to 'drivers') diff --git a/drivers/thermal/hisi_thermal.c b/drivers/thermal/hisi_thermal.c index f5231974504c..9ec5f290b850 100644 --- a/drivers/thermal/hisi_thermal.c +++ b/drivers/thermal/hisi_thermal.c @@ -221,14 +221,10 @@ static irqreturn_t hisi_thermal_alarm_irq(int irq, void *dev) static irqreturn_t hisi_thermal_alarm_irq_thread(int irq, void *dev) { struct hisi_thermal_data *data = dev; - struct hisi_thermal_sensor *sensor; - - mutex_lock(&data->thermal_lock); - sensor = &data->sensors; + struct hisi_thermal_sensor *sensor = &data->sensors; dev_crit(&data->pdev->dev, "THERMAL ALARM: T > %d\n", sensor->thres_temp); - mutex_unlock(&data->thermal_lock); thermal_zone_device_update(data->sensors.tzd, THERMAL_EVENT_UNSPECIFIED); -- cgit v1.2.1 From 1e11b014271ceccb5ea04ae58f4829ac8209a86d Mon Sep 17 00:00:00 2001 From: Daniel Lezcano Date: Thu, 19 Oct 2017 19:05:49 +0200 Subject: thermal/drivers/hisi: Encapsulate register writes into helpers Hopefully, the function name can help to clarify the semantic of the operations when writing in the register. Signed-off-by: Daniel Lezcano Signed-off-by: Eduardo Valentin --- drivers/thermal/hisi_thermal.c | 92 ++++++++++++++++++++++++++++++++---------- 1 file changed, 70 insertions(+), 22 deletions(-) (limited to 'drivers') diff --git a/drivers/thermal/hisi_thermal.c b/drivers/thermal/hisi_thermal.c index 9ec5f290b850..7747b96002e3 100644 --- a/drivers/thermal/hisi_thermal.c +++ b/drivers/thermal/hisi_thermal.c @@ -26,6 +26,7 @@ #include "thermal_core.h" +#define TEMP0_LAG (0x0) #define TEMP0_TH (0x4) #define TEMP0_RST_TH (0x8) #define TEMP0_CFG (0xC) @@ -96,6 +97,56 @@ static inline long hisi_thermal_round_temp(int temp) hisi_thermal_temp_to_step(temp)); } +static inline void hisi_thermal_set_lag(void __iomem *addr, int value) +{ + writel(value, addr + TEMP0_LAG); +} + +static inline void hisi_thermal_alarm_clear(void __iomem *addr, int value) +{ + writel(value, addr + TEMP0_INT_CLR); +} + +static inline void hisi_thermal_alarm_enable(void __iomem *addr, int value) +{ + writel(value, addr + TEMP0_INT_EN); +} + +static inline void hisi_thermal_alarm_set(void __iomem *addr, int temp) +{ + writel(hisi_thermal_temp_to_step(temp) | 0x0FFFFFF00, addr + TEMP0_TH); +} + +static inline void hisi_thermal_reset_set(void __iomem *addr, int temp) +{ + writel(hisi_thermal_temp_to_step(temp), addr + TEMP0_RST_TH); +} + +static inline void hisi_thermal_reset_enable(void __iomem *addr, int value) +{ + writel(value, addr + TEMP0_RST_MSK); +} + +static inline void hisi_thermal_enable(void __iomem *addr, int value) +{ + writel(value, addr + TEMP0_EN); +} + +static inline void hisi_thermal_sensor_select(void __iomem *addr, int sensor) +{ + writel((sensor << 12), addr + TEMP0_CFG); +} + +static inline int hisi_thermal_get_temperature(void __iomem *addr) +{ + return hisi_thermal_step_to_temp(readl(addr + TEMP0_VALUE)); +} + +static inline void hisi_thermal_hdak_set(void __iomem *addr, int value) +{ + writel(value, addr + TEMP0_CFG); +} + static long hisi_thermal_get_sensor_temp(struct hisi_thermal_data *data, struct hisi_thermal_sensor *sensor) { @@ -104,22 +155,21 @@ static long hisi_thermal_get_sensor_temp(struct hisi_thermal_data *data, mutex_lock(&data->thermal_lock); /* disable interrupt */ - writel(0x0, data->regs + TEMP0_INT_EN); - writel(0x1, data->regs + TEMP0_INT_CLR); + hisi_thermal_alarm_enable(data->regs, 0); + hisi_thermal_alarm_clear(data->regs, 1); /* disable module firstly */ - writel(0x0, data->regs + TEMP0_EN); + hisi_thermal_enable(data->regs, 0); /* select sensor id */ - writel((sensor->id << 12), data->regs + TEMP0_CFG); + hisi_thermal_sensor_select(data->regs, sensor->id); /* enable module */ - writel(0x1, data->regs + TEMP0_EN); + hisi_thermal_enable(data->regs, 1); usleep_range(3000, 5000); - val = readl(data->regs + TEMP0_VALUE); - val = hisi_thermal_step_to_temp(val); + val = hisi_thermal_get_temperature(data->regs); mutex_unlock(&data->thermal_lock); @@ -136,28 +186,26 @@ static void hisi_thermal_enable_bind_irq_sensor sensor = &data->sensors; /* setting the hdak time */ - writel(0x0, data->regs + TEMP0_CFG); + hisi_thermal_hdak_set(data->regs, 0); /* disable module firstly */ - writel(0x0, data->regs + TEMP0_RST_MSK); - writel(0x0, data->regs + TEMP0_EN); + hisi_thermal_reset_enable(data->regs, 0); + hisi_thermal_enable(data->regs, 0); /* select sensor id */ - writel((sensor->id << 12), data->regs + TEMP0_CFG); + hisi_thermal_sensor_select(data->regs, sensor->id); /* enable for interrupt */ - writel(hisi_thermal_temp_to_step(sensor->thres_temp) | 0x0FFFFFF00, - data->regs + TEMP0_TH); + hisi_thermal_alarm_set(data->regs, sensor->thres_temp); - writel(hisi_thermal_temp_to_step(HISI_TEMP_RESET), - data->regs + TEMP0_RST_TH); + hisi_thermal_reset_set(data->regs, HISI_TEMP_RESET); /* enable module */ - writel(0x1, data->regs + TEMP0_RST_MSK); - writel(0x1, data->regs + TEMP0_EN); + hisi_thermal_reset_enable(data->regs, 1); + hisi_thermal_enable(data->regs, 1); - writel(0x0, data->regs + TEMP0_INT_CLR); - writel(0x1, data->regs + TEMP0_INT_EN); + hisi_thermal_alarm_clear(data->regs, 0); + hisi_thermal_alarm_enable(data->regs, 1); usleep_range(3000, 5000); @@ -169,9 +217,9 @@ static void hisi_thermal_disable_sensor(struct hisi_thermal_data *data) mutex_lock(&data->thermal_lock); /* disable sensor module */ - writel(0x0, data->regs + TEMP0_INT_EN); - writel(0x0, data->regs + TEMP0_RST_MSK); - writel(0x0, data->regs + TEMP0_EN); + hisi_thermal_enable(data->regs, 0); + hisi_thermal_alarm_enable(data->regs, 0); + hisi_thermal_reset_enable(data->regs, 0); mutex_unlock(&data->thermal_lock); } -- cgit v1.2.1 From b424315a287c70eeb5f920f84c92492bd2f5658e Mon Sep 17 00:00:00 2001 From: Daniel Lezcano Date: Thu, 19 Oct 2017 19:05:50 +0200 Subject: thermal/drivers/hisi: Fix configuration register setting The TEMP0_CFG configuration register contains different field to set up the temperature controller. However in the code, nothing prevents a setup to overwrite the previous one: eg. writing the hdak value overwrites the sensor selection, the sensor selection overwrites the hdak value. In order to prevent such thing, use a regmap-like mechanism by reading the value before, set the corresponding bits and write the result. Signed-off-by: Daniel Lezcano Signed-off-by: Eduardo Valentin --- drivers/thermal/hisi_thermal.c | 34 +++++++++++++++++++++++++++++----- 1 file changed, 29 insertions(+), 5 deletions(-) (limited to 'drivers') diff --git a/drivers/thermal/hisi_thermal.c b/drivers/thermal/hisi_thermal.c index 7747b96002e3..f3fb8e2a7f0c 100644 --- a/drivers/thermal/hisi_thermal.c +++ b/drivers/thermal/hisi_thermal.c @@ -30,6 +30,8 @@ #define TEMP0_TH (0x4) #define TEMP0_RST_TH (0x8) #define TEMP0_CFG (0xC) +#define TEMP0_CFG_SS_MSK (0xF000) +#define TEMP0_CFG_HDAK_MSK (0x30) #define TEMP0_EN (0x10) #define TEMP0_INT_EN (0x14) #define TEMP0_INT_CLR (0x18) @@ -132,19 +134,41 @@ static inline void hisi_thermal_enable(void __iomem *addr, int value) writel(value, addr + TEMP0_EN); } -static inline void hisi_thermal_sensor_select(void __iomem *addr, int sensor) +static inline int hisi_thermal_get_temperature(void __iomem *addr) { - writel((sensor << 12), addr + TEMP0_CFG); + return hisi_thermal_step_to_temp(readl(addr + TEMP0_VALUE)); } -static inline int hisi_thermal_get_temperature(void __iomem *addr) +/* + * Temperature configuration register - Sensor selection + * + * Bits [19:12] + * + * 0x0: local sensor (default) + * 0x1: remote sensor 1 (ACPU cluster 1) + * 0x2: remote sensor 2 (ACPU cluster 0) + * 0x3: remote sensor 3 (G3D) + */ +static inline void hisi_thermal_sensor_select(void __iomem *addr, int sensor) { - return hisi_thermal_step_to_temp(readl(addr + TEMP0_VALUE)); + writel((readl(addr + TEMP0_CFG) & ~TEMP0_CFG_SS_MSK) | + (sensor << 12), addr + TEMP0_CFG); } +/* + * Temperature configuration register - Hdak conversion polling interval + * + * Bits [5:4] + * + * 0x0 : 0.768 ms + * 0x1 : 6.144 ms + * 0x2 : 49.152 ms + * 0x3 : 393.216 ms + */ static inline void hisi_thermal_hdak_set(void __iomem *addr, int value) { - writel(value, addr + TEMP0_CFG); + writel((readl(addr + TEMP0_CFG) & ~TEMP0_CFG_HDAK_MSK) | + (value << 4), addr + TEMP0_CFG); } static long hisi_thermal_get_sensor_temp(struct hisi_thermal_data *data, -- cgit v1.2.1 From 10d7e9a9181f4637640f388d334c6740c1b5d0e8 Mon Sep 17 00:00:00 2001 From: Daniel Lezcano Date: Thu, 19 Oct 2017 19:05:51 +0200 Subject: thermal/drivers/hisi: Remove costly sensor inspection The sensor is all setup, bind, resetted, acked, etc... every single second. That was the way to workaround a problem with the interrupt bouncing again and again. With the following changes, we fix all in one: - Do the setup, one time, at probe time - Add the IRQF_ONESHOT, ack the interrupt in the threaded handler - Remove the interrupt handler - Set the correct value for the LAG register - Remove all the irq_enabled stuff in the code as the interruption handling is fixed - Remove the 3ms delay - Reorder the initialization routine to be in the right order It ends up to a nicer code and more efficient, the 3-5ms delay is removed from the get_temp() path. Signed-off-by: Daniel Lezcano Reviewed-by: Leo Yan Tested-by: Leo Yan Signed-off-by: Eduardo Valentin --- drivers/thermal/hisi_thermal.c | 203 +++++++++++++++++++---------------------- 1 file changed, 93 insertions(+), 110 deletions(-) (limited to 'drivers') diff --git a/drivers/thermal/hisi_thermal.c b/drivers/thermal/hisi_thermal.c index f3fb8e2a7f0c..7c5d4647cb5e 100644 --- a/drivers/thermal/hisi_thermal.c +++ b/drivers/thermal/hisi_thermal.c @@ -41,6 +41,7 @@ #define HISI_TEMP_BASE (-60000) #define HISI_TEMP_RESET (100000) #define HISI_TEMP_STEP (784) +#define HISI_TEMP_LAG (3500) #define HISI_MAX_SENSORS 4 #define HISI_DEFAULT_SENSOR 2 @@ -60,8 +61,6 @@ struct hisi_thermal_data { struct clk *clk; struct hisi_thermal_sensor sensors; int irq; - bool irq_enabled; - void __iomem *regs; }; @@ -99,9 +98,40 @@ static inline long hisi_thermal_round_temp(int temp) hisi_thermal_temp_to_step(temp)); } +/* + * The lag register contains 5 bits encoding the temperature in steps. + * + * Each time the temperature crosses the threshold boundary, an + * interrupt is raised. It could be when the temperature is going + * above the threshold or below. However, if the temperature is + * fluctuating around this value due to the load, we can receive + * several interrupts which may not desired. + * + * We can setup a temperature representing the delta between the + * threshold and the current temperature when the temperature is + * decreasing. + * + * For instance: the lag register is 5°C, the threshold is 65°C, when + * the temperature reaches 65°C an interrupt is raised and when the + * temperature decrease to 65°C - 5°C another interrupt is raised. + * + * A very short lag can lead to an interrupt storm, a long lag + * increase the latency to react to the temperature changes. In our + * case, that is not really a problem as we are polling the + * temperature. + * + * [0:4] : lag register + * + * The temperature is coded in steps, cf. HISI_TEMP_STEP. + * + * Min : 0x00 : 0.0 °C + * Max : 0x1F : 24.3 °C + * + * The 'value' parameter is in milliCelsius. + */ static inline void hisi_thermal_set_lag(void __iomem *addr, int value) { - writel(value, addr + TEMP0_LAG); + writel((value / HISI_TEMP_STEP) & 0x1F, addr + TEMP0_LAG); } static inline void hisi_thermal_alarm_clear(void __iomem *addr, int value) @@ -171,71 +201,6 @@ static inline void hisi_thermal_hdak_set(void __iomem *addr, int value) (value << 4), addr + TEMP0_CFG); } -static long hisi_thermal_get_sensor_temp(struct hisi_thermal_data *data, - struct hisi_thermal_sensor *sensor) -{ - long val; - - mutex_lock(&data->thermal_lock); - - /* disable interrupt */ - hisi_thermal_alarm_enable(data->regs, 0); - hisi_thermal_alarm_clear(data->regs, 1); - - /* disable module firstly */ - hisi_thermal_enable(data->regs, 0); - - /* select sensor id */ - hisi_thermal_sensor_select(data->regs, sensor->id); - - /* enable module */ - hisi_thermal_enable(data->regs, 1); - - usleep_range(3000, 5000); - - val = hisi_thermal_get_temperature(data->regs); - - mutex_unlock(&data->thermal_lock); - - return val; -} - -static void hisi_thermal_enable_bind_irq_sensor - (struct hisi_thermal_data *data) -{ - struct hisi_thermal_sensor *sensor; - - mutex_lock(&data->thermal_lock); - - sensor = &data->sensors; - - /* setting the hdak time */ - hisi_thermal_hdak_set(data->regs, 0); - - /* disable module firstly */ - hisi_thermal_reset_enable(data->regs, 0); - hisi_thermal_enable(data->regs, 0); - - /* select sensor id */ - hisi_thermal_sensor_select(data->regs, sensor->id); - - /* enable for interrupt */ - hisi_thermal_alarm_set(data->regs, sensor->thres_temp); - - hisi_thermal_reset_set(data->regs, HISI_TEMP_RESET); - - /* enable module */ - hisi_thermal_reset_enable(data->regs, 1); - hisi_thermal_enable(data->regs, 1); - - hisi_thermal_alarm_clear(data->regs, 0); - hisi_thermal_alarm_enable(data->regs, 1); - - usleep_range(3000, 5000); - - mutex_unlock(&data->thermal_lock); -} - static void hisi_thermal_disable_sensor(struct hisi_thermal_data *data) { mutex_lock(&data->thermal_lock); @@ -253,25 +218,10 @@ static int hisi_thermal_get_temp(void *_sensor, int *temp) struct hisi_thermal_sensor *sensor = _sensor; struct hisi_thermal_data *data = sensor->thermal; - *temp = hisi_thermal_get_sensor_temp(data, sensor); - - dev_dbg(&data->pdev->dev, "id=%d, irq=%d, temp=%d, thres=%d\n", - sensor->id, data->irq_enabled, *temp, sensor->thres_temp); - /* - * Bind irq to sensor for two cases: - * Reenable alarm IRQ if temperature below threshold; - * if irq has been enabled, always set it; - */ - if (data->irq_enabled) { - hisi_thermal_enable_bind_irq_sensor(data); - return 0; - } + *temp = hisi_thermal_get_temperature(data->regs); - if (*temp < sensor->thres_temp) { - data->irq_enabled = true; - hisi_thermal_enable_bind_irq_sensor(data); - enable_irq(data->irq); - } + dev_dbg(&data->pdev->dev, "id=%d, temp=%d, thres=%d\n", + sensor->id, *temp, sensor->thres_temp); return 0; } @@ -280,26 +230,27 @@ static const struct thermal_zone_of_device_ops hisi_of_thermal_ops = { .get_temp = hisi_thermal_get_temp, }; -static irqreturn_t hisi_thermal_alarm_irq(int irq, void *dev) +static irqreturn_t hisi_thermal_alarm_irq_thread(int irq, void *dev) { struct hisi_thermal_data *data = dev; + struct hisi_thermal_sensor *sensor = &data->sensors; + int temp; - disable_irq_nosync(irq); - data->irq_enabled = false; + hisi_thermal_alarm_clear(data->regs, 1); - return IRQ_WAKE_THREAD; -} + temp = hisi_thermal_get_temperature(data->regs); -static irqreturn_t hisi_thermal_alarm_irq_thread(int irq, void *dev) -{ - struct hisi_thermal_data *data = dev; - struct hisi_thermal_sensor *sensor = &data->sensors; + if (temp >= sensor->thres_temp) { + dev_crit(&data->pdev->dev, "THERMAL ALARM: %d > %d\n", + temp, sensor->thres_temp); - dev_crit(&data->pdev->dev, "THERMAL ALARM: T > %d\n", - sensor->thres_temp); + thermal_zone_device_update(data->sensors.tzd, + THERMAL_EVENT_UNSPECIFIED); - thermal_zone_device_update(data->sensors.tzd, - THERMAL_EVENT_UNSPECIFIED); + } else if (temp < sensor->thres_temp) { + dev_crit(&data->pdev->dev, "THERMAL ALARM stopped: %d < %d\n", + temp, sensor->thres_temp); + } return IRQ_HANDLED; } @@ -352,6 +303,40 @@ static void hisi_thermal_toggle_sensor(struct hisi_thermal_sensor *sensor, on ? THERMAL_DEVICE_ENABLED : THERMAL_DEVICE_DISABLED); } +static int hisi_thermal_setup(struct hisi_thermal_data *data) +{ + struct hisi_thermal_sensor *sensor; + + sensor = &data->sensors; + + /* disable module firstly */ + hisi_thermal_reset_enable(data->regs, 0); + hisi_thermal_enable(data->regs, 0); + + /* select sensor id */ + hisi_thermal_sensor_select(data->regs, sensor->id); + + /* setting the hdak time */ + hisi_thermal_hdak_set(data->regs, 0); + + /* setting lag value between current temp and the threshold */ + hisi_thermal_set_lag(data->regs, HISI_TEMP_LAG); + + /* enable for interrupt */ + hisi_thermal_alarm_set(data->regs, sensor->thres_temp); + + hisi_thermal_reset_set(data->regs, HISI_TEMP_RESET); + + /* enable module */ + hisi_thermal_reset_enable(data->regs, 1); + hisi_thermal_enable(data->regs, 1); + + hisi_thermal_alarm_clear(data->regs, 0); + hisi_thermal_alarm_enable(data->regs, 1); + + return 0; +} + static int hisi_thermal_probe(struct platform_device *pdev) { struct hisi_thermal_data *data; @@ -394,9 +379,6 @@ static int hisi_thermal_probe(struct platform_device *pdev) return ret; } - hisi_thermal_enable_bind_irq_sensor(data); - data->irq_enabled = true; - ret = hisi_thermal_register_sensor(pdev, data, &data->sensors, HISI_DEFAULT_SENSOR); @@ -406,18 +388,21 @@ static int hisi_thermal_probe(struct platform_device *pdev) return ret; } - hisi_thermal_toggle_sensor(&data->sensors, true); + ret = hisi_thermal_setup(data); + if (ret) { + dev_err(&pdev->dev, "Failed to setup the sensor: %d\n", ret); + return ret; + } - ret = devm_request_threaded_irq(&pdev->dev, data->irq, - hisi_thermal_alarm_irq, + ret = devm_request_threaded_irq(&pdev->dev, data->irq, NULL, hisi_thermal_alarm_irq_thread, - 0, "hisi_thermal", data); + IRQF_ONESHOT, "hisi_thermal", data); if (ret < 0) { dev_err(&pdev->dev, "failed to request alarm irq: %d\n", ret); return ret; } - enable_irq(data->irq); + hisi_thermal_toggle_sensor(&data->sensors, true); return 0; } @@ -440,7 +425,6 @@ static int hisi_thermal_suspend(struct device *dev) struct hisi_thermal_data *data = dev_get_drvdata(dev); hisi_thermal_disable_sensor(data); - data->irq_enabled = false; clk_disable_unprepare(data->clk); @@ -456,8 +440,7 @@ static int hisi_thermal_resume(struct device *dev) if (ret) return ret; - data->irq_enabled = true; - hisi_thermal_enable_bind_irq_sensor(data); + hisi_thermal_setup(data); return 0; } -- cgit v1.2.1 From 609f26dcbb340d7d6b30b1951c8b525611a97c20 Mon Sep 17 00:00:00 2001 From: Daniel Lezcano Date: Thu, 19 Oct 2017 19:05:52 +0200 Subject: thermal/drivers/hisi: Rename and remove unused field Rename the 'sensors' field to 'sensor' as we describe only one sensor. Remove the 'sensor_temp' as it is no longer used. Signed-off-by: Daniel Lezcano Reviewed-by: Leo Yan Tested-by: Leo Yan Signed-off-by: Eduardo Valentin --- drivers/thermal/hisi_thermal.c | 18 ++++++++---------- 1 file changed, 8 insertions(+), 10 deletions(-) (limited to 'drivers') diff --git a/drivers/thermal/hisi_thermal.c b/drivers/thermal/hisi_thermal.c index 7c5d4647cb5e..0b1f56a81b9f 100644 --- a/drivers/thermal/hisi_thermal.c +++ b/drivers/thermal/hisi_thermal.c @@ -49,8 +49,6 @@ struct hisi_thermal_sensor { struct hisi_thermal_data *thermal; struct thermal_zone_device *tzd; - - long sensor_temp; uint32_t id; uint32_t thres_temp; }; @@ -59,9 +57,9 @@ struct hisi_thermal_data { struct mutex thermal_lock; /* protects register data */ struct platform_device *pdev; struct clk *clk; - struct hisi_thermal_sensor sensors; - int irq; + struct hisi_thermal_sensor sensor; void __iomem *regs; + int irq; }; /* @@ -233,7 +231,7 @@ static const struct thermal_zone_of_device_ops hisi_of_thermal_ops = { static irqreturn_t hisi_thermal_alarm_irq_thread(int irq, void *dev) { struct hisi_thermal_data *data = dev; - struct hisi_thermal_sensor *sensor = &data->sensors; + struct hisi_thermal_sensor *sensor = &data->sensor; int temp; hisi_thermal_alarm_clear(data->regs, 1); @@ -244,7 +242,7 @@ static irqreturn_t hisi_thermal_alarm_irq_thread(int irq, void *dev) dev_crit(&data->pdev->dev, "THERMAL ALARM: %d > %d\n", temp, sensor->thres_temp); - thermal_zone_device_update(data->sensors.tzd, + thermal_zone_device_update(data->sensor.tzd, THERMAL_EVENT_UNSPECIFIED); } else if (temp < sensor->thres_temp) { @@ -307,7 +305,7 @@ static int hisi_thermal_setup(struct hisi_thermal_data *data) { struct hisi_thermal_sensor *sensor; - sensor = &data->sensors; + sensor = &data->sensor; /* disable module firstly */ hisi_thermal_reset_enable(data->regs, 0); @@ -380,7 +378,7 @@ static int hisi_thermal_probe(struct platform_device *pdev) } ret = hisi_thermal_register_sensor(pdev, data, - &data->sensors, + &data->sensor, HISI_DEFAULT_SENSOR); if (ret) { dev_err(&pdev->dev, "failed to register thermal sensor: %d\n", @@ -402,7 +400,7 @@ static int hisi_thermal_probe(struct platform_device *pdev) return ret; } - hisi_thermal_toggle_sensor(&data->sensors, true); + hisi_thermal_toggle_sensor(&data->sensor, true); return 0; } @@ -410,7 +408,7 @@ static int hisi_thermal_probe(struct platform_device *pdev) static int hisi_thermal_remove(struct platform_device *pdev) { struct hisi_thermal_data *data = platform_get_drvdata(pdev); - struct hisi_thermal_sensor *sensor = &data->sensors; + struct hisi_thermal_sensor *sensor = &data->sensor; hisi_thermal_toggle_sensor(sensor, false); hisi_thermal_disable_sensor(data); -- cgit v1.2.1 From bc02ef6d98a601a39f735cbbb67807fb752b5138 Mon Sep 17 00:00:00 2001 From: Daniel Lezcano Date: Thu, 19 Oct 2017 19:05:53 +0200 Subject: thermal/drivers/hisi: Convert long to int There is no point to specify the temperature as long variable, the int is enough. Replace all long variables to int, so making the code consistent. Signed-off-by: Daniel Lezcano Reviewed-by: Leo Yan Signed-off-by: Eduardo Valentin --- drivers/thermal/hisi_thermal.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/thermal/hisi_thermal.c b/drivers/thermal/hisi_thermal.c index 0b1f56a81b9f..30bc69921dca 100644 --- a/drivers/thermal/hisi_thermal.c +++ b/drivers/thermal/hisi_thermal.c @@ -85,12 +85,12 @@ static inline int hisi_thermal_step_to_temp(int step) return HISI_TEMP_BASE + (step * HISI_TEMP_STEP); } -static inline long hisi_thermal_temp_to_step(long temp) +static inline int hisi_thermal_temp_to_step(int temp) { return (temp - HISI_TEMP_BASE) / HISI_TEMP_STEP; } -static inline long hisi_thermal_round_temp(int temp) +static inline int hisi_thermal_round_temp(int temp) { return hisi_thermal_step_to_temp( hisi_thermal_temp_to_step(temp)); -- cgit v1.2.1 From 81d7cb7946f03d339244e1a822b7da246d8c79ff Mon Sep 17 00:00:00 2001 From: Daniel Lezcano Date: Thu, 19 Oct 2017 19:05:54 +0200 Subject: thermal/drivers/hisi: Remove thermal data back pointer The presence of the thermal data pointer in the sensor structure has the unique purpose of accessing the thermal data in the interrupt handler. The sensor pointer is passed when registering the interrupt handler, replace the cookie by the thermal data pointer, so the back pointer is no longer needed. Signed-off-by: Daniel Lezcano Signed-off-by: Eduardo Valentin --- drivers/thermal/hisi_thermal.c | 11 +++++------ 1 file changed, 5 insertions(+), 6 deletions(-) (limited to 'drivers') diff --git a/drivers/thermal/hisi_thermal.c b/drivers/thermal/hisi_thermal.c index 30bc69921dca..e09b52313ceb 100644 --- a/drivers/thermal/hisi_thermal.c +++ b/drivers/thermal/hisi_thermal.c @@ -47,7 +47,6 @@ #define HISI_DEFAULT_SENSOR 2 struct hisi_thermal_sensor { - struct hisi_thermal_data *thermal; struct thermal_zone_device *tzd; uint32_t id; uint32_t thres_temp; @@ -211,10 +210,10 @@ static void hisi_thermal_disable_sensor(struct hisi_thermal_data *data) mutex_unlock(&data->thermal_lock); } -static int hisi_thermal_get_temp(void *_sensor, int *temp) +static int hisi_thermal_get_temp(void *__data, int *temp) { - struct hisi_thermal_sensor *sensor = _sensor; - struct hisi_thermal_data *data = sensor->thermal; + struct hisi_thermal_data *data = __data; + struct hisi_thermal_sensor *sensor = &data->sensor; *temp = hisi_thermal_get_temperature(data->regs); @@ -262,10 +261,10 @@ static int hisi_thermal_register_sensor(struct platform_device *pdev, const struct thermal_trip *trip; sensor->id = index; - sensor->thermal = data; sensor->tzd = devm_thermal_zone_of_sensor_register(&pdev->dev, - sensor->id, sensor, &hisi_of_thermal_ops); + sensor->id, data, + &hisi_of_thermal_ops); if (IS_ERR(sensor->tzd)) { ret = PTR_ERR(sensor->tzd); sensor->tzd = NULL; -- cgit v1.2.1 From cc1ab38d2b2ad3290426c2234cf83e7a323554c7 Mon Sep 17 00:00:00 2001 From: Daniel Lezcano Date: Thu, 19 Oct 2017 19:05:55 +0200 Subject: thermal/drivers/hisi: Remove mutex_lock in the code The mutex is used to protect against writes in the configuration register. That happens at probe time, with no possible race yet. Then when the module is unloaded and at suspend/resume. When the module is unloaded, it is an userspace operation, thus via a process. Suspending the system goes through the freezer to suspend all the tasks synchronously before continuing. So it is not possible to hit the suspend ops in this driver while we are unloading it. The resume is the same situation than the probe. In other words, even if there are several places where we write the configuration register, there is no situation where we can write it at the same time, so far as I can judge Signed-off-by: Daniel Lezcano Reviewed-by: Leo Yan Tested-by: Leo Yan Signed-off-by: Eduardo Valentin --- drivers/thermal/hisi_thermal.c | 6 ------ 1 file changed, 6 deletions(-) (limited to 'drivers') diff --git a/drivers/thermal/hisi_thermal.c b/drivers/thermal/hisi_thermal.c index e09b52313ceb..90e91fedc76d 100644 --- a/drivers/thermal/hisi_thermal.c +++ b/drivers/thermal/hisi_thermal.c @@ -53,7 +53,6 @@ struct hisi_thermal_sensor { }; struct hisi_thermal_data { - struct mutex thermal_lock; /* protects register data */ struct platform_device *pdev; struct clk *clk; struct hisi_thermal_sensor sensor; @@ -200,14 +199,10 @@ static inline void hisi_thermal_hdak_set(void __iomem *addr, int value) static void hisi_thermal_disable_sensor(struct hisi_thermal_data *data) { - mutex_lock(&data->thermal_lock); - /* disable sensor module */ hisi_thermal_enable(data->regs, 0); hisi_thermal_alarm_enable(data->regs, 0); hisi_thermal_reset_enable(data->regs, 0); - - mutex_unlock(&data->thermal_lock); } static int hisi_thermal_get_temp(void *__data, int *temp) @@ -344,7 +339,6 @@ static int hisi_thermal_probe(struct platform_device *pdev) if (!data) return -ENOMEM; - mutex_init(&data->thermal_lock); data->pdev = pdev; res = platform_get_resource(pdev, IORESOURCE_MEM, 0); -- cgit v1.2.1 From 943c0f6abfb6010065b80943356975885a33233c Mon Sep 17 00:00:00 2001 From: Kevin Wangtao Date: Thu, 19 Oct 2017 19:05:56 +0200 Subject: thermal/drivers/hisi: Move the clk setup in the corresponding functions The sensor's clock is enabled and disabled outside of the probe and disable function. Moving the corresponding action in the hisi_thermal_setup() and hisi_thermal_disable_sensor(), factors out some lines of code and makes the code more symmetric. Signed-off-by: Kevin Wangtao Tested-by: Daniel Lezcano # hikey6220 Signed-off-by: Daniel Lezcano Signed-off-by: Eduardo Valentin --- drivers/thermal/hisi_thermal.c | 29 +++++++++-------------------- 1 file changed, 9 insertions(+), 20 deletions(-) (limited to 'drivers') diff --git a/drivers/thermal/hisi_thermal.c b/drivers/thermal/hisi_thermal.c index 90e91fedc76d..373bb6d094a1 100644 --- a/drivers/thermal/hisi_thermal.c +++ b/drivers/thermal/hisi_thermal.c @@ -203,6 +203,8 @@ static void hisi_thermal_disable_sensor(struct hisi_thermal_data *data) hisi_thermal_enable(data->regs, 0); hisi_thermal_alarm_enable(data->regs, 0); hisi_thermal_reset_enable(data->regs, 0); + + clk_disable_unprepare(data->clk); } static int hisi_thermal_get_temp(void *__data, int *temp) @@ -297,9 +299,13 @@ static void hisi_thermal_toggle_sensor(struct hisi_thermal_sensor *sensor, static int hisi_thermal_setup(struct hisi_thermal_data *data) { - struct hisi_thermal_sensor *sensor; + struct hisi_thermal_sensor *sensor = &data->sensor; + int ret; - sensor = &data->sensor; + /* enable clock for tsensor */ + ret = clk_prepare_enable(data->clk); + if (ret) + return ret; /* disable module firstly */ hisi_thermal_reset_enable(data->regs, 0); @@ -363,13 +369,6 @@ static int hisi_thermal_probe(struct platform_device *pdev) return ret; } - /* enable clock for thermal */ - ret = clk_prepare_enable(data->clk); - if (ret) { - dev_err(&pdev->dev, "failed to enable thermal clk: %d\n", ret); - return ret; - } - ret = hisi_thermal_register_sensor(pdev, data, &data->sensor, HISI_DEFAULT_SENSOR); @@ -405,7 +404,6 @@ static int hisi_thermal_remove(struct platform_device *pdev) hisi_thermal_toggle_sensor(sensor, false); hisi_thermal_disable_sensor(data); - clk_disable_unprepare(data->clk); return 0; } @@ -417,23 +415,14 @@ static int hisi_thermal_suspend(struct device *dev) hisi_thermal_disable_sensor(data); - clk_disable_unprepare(data->clk); - return 0; } static int hisi_thermal_resume(struct device *dev) { struct hisi_thermal_data *data = dev_get_drvdata(dev); - int ret; - ret = clk_prepare_enable(data->clk); - if (ret) - return ret; - - hisi_thermal_setup(data); - - return 0; + return hisi_thermal_setup(data); } #endif -- cgit v1.2.1 From e42bbe1160c3b5fcab8d5afcc49d8647adff6c9c Mon Sep 17 00:00:00 2001 From: Kevin Wangtao Date: Thu, 19 Oct 2017 19:05:57 +0200 Subject: thermal/drivers/hisi: Use round up step value Use round up division to ensure the programmed value of threshold and the lag are not less than what we set, and in order to keep the accuracy while using round up division, the step value should be a rounded up value. There is no need to use hisi_thermal_round_temp. Signed-off-by: Kevin Wangtao Tested-by: Daniel Lezcano # hikey6220 Signed-off-by: Daniel Lezcano Signed-off-by: Eduardo Valentin --- drivers/thermal/hisi_thermal.c | 22 ++++++++-------------- 1 file changed, 8 insertions(+), 14 deletions(-) (limited to 'drivers') diff --git a/drivers/thermal/hisi_thermal.c b/drivers/thermal/hisi_thermal.c index 373bb6d094a1..65f9e5c80741 100644 --- a/drivers/thermal/hisi_thermal.c +++ b/drivers/thermal/hisi_thermal.c @@ -40,7 +40,7 @@ #define HISI_TEMP_BASE (-60000) #define HISI_TEMP_RESET (100000) -#define HISI_TEMP_STEP (784) +#define HISI_TEMP_STEP (785) #define HISI_TEMP_LAG (3500) #define HISI_MAX_SENSORS 4 @@ -63,19 +63,19 @@ struct hisi_thermal_data { /* * The temperature computation on the tsensor is as follow: * Unit: millidegree Celsius - * Step: 255/200 (0.7843) + * Step: 200/255 (0.7843) * Temperature base: -60°C * - * The register is programmed in temperature steps, every step is 784 + * The register is programmed in temperature steps, every step is 785 * millidegree and begins at -60 000 m°C * * The temperature from the steps: * - * Temp = TempBase + (steps x 784) + * Temp = TempBase + (steps x 785) * * and the steps from the temperature: * - * steps = (Temp - TempBase) / 784 + * steps = (Temp - TempBase) / 785 * */ static inline int hisi_thermal_step_to_temp(int step) @@ -85,13 +85,7 @@ static inline int hisi_thermal_step_to_temp(int step) static inline int hisi_thermal_temp_to_step(int temp) { - return (temp - HISI_TEMP_BASE) / HISI_TEMP_STEP; -} - -static inline int hisi_thermal_round_temp(int temp) -{ - return hisi_thermal_step_to_temp( - hisi_thermal_temp_to_step(temp)); + return DIV_ROUND_UP(temp - HISI_TEMP_BASE, HISI_TEMP_STEP); } /* @@ -127,7 +121,7 @@ static inline int hisi_thermal_round_temp(int temp) */ static inline void hisi_thermal_set_lag(void __iomem *addr, int value) { - writel((value / HISI_TEMP_STEP) & 0x1F, addr + TEMP0_LAG); + writel(DIV_ROUND_UP(value, HISI_TEMP_STEP) & 0x1F, addr + TEMP0_LAG); } static inline void hisi_thermal_alarm_clear(void __iomem *addr, int value) @@ -274,7 +268,7 @@ static int hisi_thermal_register_sensor(struct platform_device *pdev, for (i = 0; i < of_thermal_get_ntrips(sensor->tzd); i++) { if (trip[i].type == THERMAL_TRIP_PASSIVE) { - sensor->thres_temp = hisi_thermal_round_temp(trip[i].temperature); + sensor->thres_temp = trip[i].temperature; break; } } -- cgit v1.2.1 From 07209fcf33542c1ff1e29df2dbdf8f29cdaacb10 Mon Sep 17 00:00:00 2001 From: Daniel Lezcano Date: Thu, 19 Oct 2017 19:05:58 +0200 Subject: thermal/drivers/step_wise: Fix temperature regulation misbehavior MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit There is a particular situation when the cooling device is cpufreq and the heat dissipation is not efficient enough where the temperature increases little by little until reaching the critical threshold and leading to a SoC reset. The behavior is reproducible on a hikey6220 with bad heat dissipation (eg. stacked with other boards). Running a simple C program doing while(1); for each CPU of the SoC makes the temperature to reach the passive regulation trip point and ends up to the maximum allowed temperature followed by a reset. This issue has been also reported by running the libhugetlbfs test suite. What is observed is a ping pong between two cpu frequencies, 1.2GHz and 900MHz while the temperature continues to grow. It appears the step wise governor calls get_target_state() the first time with the throttle set to true and the trend to 'raising'. The code selects logically the next state, so the cpu frequency decreases from 1.2GHz to 900MHz, so far so good. The temperature decreases immediately but still stays greater than the trip point, then get_target_state() is called again, this time with the throttle set to true *and* the trend to 'dropping'. From there the algorithm assumes we have to step down the state and the cpu frequency jumps back to 1.2GHz. But the temperature is still higher than the trip point, so get_target_state() is called with throttle=1 and trend='raising' again, we jump to 900MHz, then get_target_state() is called with throttle=1 and trend='dropping', we jump to 1.2GHz, etc ... but the temperature does not stabilizes and continues to increase. [ 237.922654] thermal thermal_zone0: Trip0[type=1,temp=65000]:trend=1,throttle=1 [ 237.922678] thermal thermal_zone0: Trip1[type=1,temp=75000]:trend=1,throttle=1 [ 237.922690] thermal cooling_device0: cur_state=0 [ 237.922701] thermal cooling_device0: old_target=0, target=1 [ 238.026656] thermal thermal_zone0: Trip0[type=1,temp=65000]:trend=2,throttle=1 [ 238.026680] thermal thermal_zone0: Trip1[type=1,temp=75000]:trend=2,throttle=1 [ 238.026694] thermal cooling_device0: cur_state=1 [ 238.026707] thermal cooling_device0: old_target=1, target=0 [ 238.134647] thermal thermal_zone0: Trip0[type=1,temp=65000]:trend=1,throttle=1 [ 238.134667] thermal thermal_zone0: Trip1[type=1,temp=75000]:trend=1,throttle=1 [ 238.134679] thermal cooling_device0: cur_state=0 [ 238.134690] thermal cooling_device0: old_target=0, target=1 In this situation the temperature continues to increase while the trend is oscillating between 'dropping' and 'raising'. We need to keep the current state untouched if the throttle is set, so the temperature can decrease or a higher state could be selected, thus preventing this oscillation. Keeping the next_target untouched when 'throttle' is true at 'dropping' time fixes the issue. The following traces show the governor does not change the next state if trend==2 (dropping) and throttle==1. [ 2306.127987] thermal thermal_zone0: Trip0[type=1,temp=65000]:trend=1,throttle=1 [ 2306.128009] thermal thermal_zone0: Trip1[type=1,temp=75000]:trend=1,throttle=1 [ 2306.128021] thermal cooling_device0: cur_state=0 [ 2306.128031] thermal cooling_device0: old_target=0, target=1 [ 2306.231991] thermal thermal_zone0: Trip0[type=1,temp=65000]:trend=2,throttle=1 [ 2306.232016] thermal thermal_zone0: Trip1[type=1,temp=75000]:trend=2,throttle=1 [ 2306.232030] thermal cooling_device0: cur_state=1 [ 2306.232042] thermal cooling_device0: old_target=1, target=1 [ 2306.335982] thermal thermal_zone0: Trip0[type=1,temp=65000]:trend=0,throttle=1 [ 2306.336006] thermal thermal_zone0: Trip1[type=1,temp=75000]:trend=0,throttle=1 [ 2306.336021] thermal cooling_device0: cur_state=1 [ 2306.336034] thermal cooling_device0: old_target=1, target=1 [ 2306.439984] thermal thermal_zone0: Trip0[type=1,temp=65000]:trend=2,throttle=1 [ 2306.440008] thermal thermal_zone0: Trip1[type=1,temp=75000]:trend=2,throttle=0 [ 2306.440022] thermal cooling_device0: cur_state=1 [ 2306.440034] thermal cooling_device0: old_target=1, target=0 [ ... ] After a while, if the temperature continues to increase, the next state becomes 2 which is 720MHz on the hikey. That results in the temperature stabilizing around the trip point. [ 2455.831982] thermal thermal_zone0: Trip0[type=1,temp=65000]:trend=1,throttle=1 [ 2455.832006] thermal thermal_zone0: Trip1[type=1,temp=75000]:trend=1,throttle=0 [ 2455.832019] thermal cooling_device0: cur_state=1 [ 2455.832032] thermal cooling_device0: old_target=1, target=1 [ 2455.935985] thermal thermal_zone0: Trip0[type=1,temp=65000]:trend=0,throttle=1 [ 2455.936013] thermal thermal_zone0: Trip1[type=1,temp=75000]:trend=0,throttle=0 [ 2455.936027] thermal cooling_device0: cur_state=1 [ 2455.936040] thermal cooling_device0: old_target=1, target=1 [ 2456.043984] thermal thermal_zone0: Trip0[type=1,temp=65000]:trend=0,throttle=1 [ 2456.044009] thermal thermal_zone0: Trip1[type=1,temp=75000]:trend=0,throttle=0 [ 2456.044023] thermal cooling_device0: cur_state=1 [ 2456.044036] thermal cooling_device0: old_target=1, target=1 [ 2456.148001] thermal thermal_zone0: Trip0[type=1,temp=65000]:trend=1,throttle=1 [ 2456.148028] thermal thermal_zone0: Trip1[type=1,temp=75000]:trend=1,throttle=1 [ 2456.148042] thermal cooling_device0: cur_state=1 [ 2456.148055] thermal cooling_device0: old_target=1, target=2 [ 2456.252009] thermal thermal_zone0: Trip0[type=1,temp=65000]:trend=2,throttle=1 [ 2456.252041] thermal thermal_zone0: Trip1[type=1,temp=75000]:trend=2,throttle=0 [ 2456.252058] thermal cooling_device0: cur_state=2 [ 2456.252075] thermal cooling_device0: old_target=2, target=1 IOW, this change is needed to keep the state for a cooling device if the temperature trend is oscillating while the temperature increases slightly. Without this change, the situation above leads to a catastrophic crash by a hardware reset on hikey. This issue has been reported to happen on an OMAP dra7xx also. Signed-off-by: Daniel Lezcano Cc: Keerthy Cc: John Stultz Cc: Leo Yan Tested-by: Keerthy Reviewed-by: Keerthy Signed-off-by: Eduardo Valentin --- drivers/thermal/step_wise.c | 11 ++++++----- 1 file changed, 6 insertions(+), 5 deletions(-) (limited to 'drivers') diff --git a/drivers/thermal/step_wise.c b/drivers/thermal/step_wise.c index be95826631b7..ee047ca43084 100644 --- a/drivers/thermal/step_wise.c +++ b/drivers/thermal/step_wise.c @@ -31,8 +31,7 @@ * If the temperature is higher than a trip point, * a. if the trend is THERMAL_TREND_RAISING, use higher cooling * state for this trip point - * b. if the trend is THERMAL_TREND_DROPPING, use lower cooling - * state for this trip point + * b. if the trend is THERMAL_TREND_DROPPING, do nothing * c. if the trend is THERMAL_TREND_RAISE_FULL, use upper limit * for this trip point * d. if the trend is THERMAL_TREND_DROP_FULL, use lower limit @@ -94,9 +93,11 @@ static unsigned long get_target_state(struct thermal_instance *instance, if (!throttle) next_target = THERMAL_NO_TARGET; } else { - next_target = cur_state - 1; - if (next_target > instance->upper) - next_target = instance->upper; + if (!throttle) { + next_target = cur_state - 1; + if (next_target > instance->upper) + next_target = instance->upper; + } } break; case THERMAL_TREND_DROP_FULL: -- cgit v1.2.1 From d377aba193111419341fabaec6cab92df25e1b28 Mon Sep 17 00:00:00 2001 From: Daniel Lezcano Date: Thu, 19 Oct 2017 19:05:59 +0200 Subject: thermal/drivers/generic-iio-adc: Switch tz request to devm version Everything mentionned here: https://lkml.org/lkml/2016/4/20/850 This driver was added before the devm_iio_channel_get() function version was merged. The sensor should be released before the iio channel, thus we had to use the non-devm version of thermal_zone_of_sensor_register(). Now the devm_iio_channel_get() is available, do the corresponding change in this driver and remove gadc_thermal_remove(). [Compiled tested only] Acked-by: Laxman Dewangan Signed-off-by: Daniel Lezcano Signed-off-by: Eduardo Valentin --- drivers/thermal/thermal-generic-adc.c | 24 ++++-------------------- 1 file changed, 4 insertions(+), 20 deletions(-) (limited to 'drivers') diff --git a/drivers/thermal/thermal-generic-adc.c b/drivers/thermal/thermal-generic-adc.c index 73f55d6a1721..46d3005335c7 100644 --- a/drivers/thermal/thermal-generic-adc.c +++ b/drivers/thermal/thermal-generic-adc.c @@ -126,37 +126,22 @@ static int gadc_thermal_probe(struct platform_device *pdev) gti->dev = &pdev->dev; platform_set_drvdata(pdev, gti); - gti->channel = iio_channel_get(&pdev->dev, "sensor-channel"); + gti->channel = devm_iio_channel_get(&pdev->dev, "sensor-channel"); if (IS_ERR(gti->channel)) { ret = PTR_ERR(gti->channel); dev_err(&pdev->dev, "IIO channel not found: %d\n", ret); return ret; } - gti->tz_dev = thermal_zone_of_sensor_register(&pdev->dev, 0, - gti, &gadc_thermal_ops); + gti->tz_dev = devm_thermal_zone_of_sensor_register(&pdev->dev, 0, gti, + &gadc_thermal_ops); if (IS_ERR(gti->tz_dev)) { ret = PTR_ERR(gti->tz_dev); dev_err(&pdev->dev, "Thermal zone sensor register failed: %d\n", ret); - goto sensor_fail; + return ret; } - return 0; - -sensor_fail: - iio_channel_release(gti->channel); - - return ret; -} - -static int gadc_thermal_remove(struct platform_device *pdev) -{ - struct gadc_thermal_info *gti = platform_get_drvdata(pdev); - - thermal_zone_of_sensor_unregister(&pdev->dev, gti->tz_dev); - iio_channel_release(gti->channel); - return 0; } @@ -172,7 +157,6 @@ static struct platform_driver gadc_thermal_driver = { .of_match_table = of_adc_thermal_match, }, .probe = gadc_thermal_probe, - .remove = gadc_thermal_remove, }; module_platform_driver(gadc_thermal_driver); -- cgit v1.2.1 From 7a4ca51b704038d1d7f5e31177a7fa4d9dcb839e Mon Sep 17 00:00:00 2001 From: Daniel Lezcano Date: Thu, 19 Oct 2017 19:06:00 +0200 Subject: thermal/drivers/qcom-spmi: Use devm_iio_channel_get The iio_channel_get() function has now its devm_ version. Use it and remove all the rollback code for iio_channel_release() as well as the .remove ops. [Compiled tested only] Signed-off-by: Daniel Lezcano Signed-off-by: Eduardo Valentin --- drivers/thermal/qcom-spmi-temp-alarm.c | 43 +++++++++++----------------------- 1 file changed, 14 insertions(+), 29 deletions(-) (limited to 'drivers') diff --git a/drivers/thermal/qcom-spmi-temp-alarm.c b/drivers/thermal/qcom-spmi-temp-alarm.c index f50241962ad2..95f987d5aa71 100644 --- a/drivers/thermal/qcom-spmi-temp-alarm.c +++ b/drivers/thermal/qcom-spmi-temp-alarm.c @@ -125,7 +125,7 @@ static int qpnp_tm_get_temp(void *data, int *temp) if (!temp) return -EINVAL; - if (IS_ERR(chip->adc)) { + if (!chip->adc) { ret = qpnp_tm_update_temp_no_adc(chip); if (ret < 0) return ret; @@ -224,67 +224,53 @@ static int qpnp_tm_probe(struct platform_device *pdev) return irq; /* ADC based measurements are optional */ - chip->adc = iio_channel_get(&pdev->dev, "thermal"); - if (PTR_ERR(chip->adc) == -EPROBE_DEFER) - return PTR_ERR(chip->adc); + chip->adc = devm_iio_channel_get(&pdev->dev, "thermal"); + if (IS_ERR(chip->adc)) { + ret = PTR_ERR(chip->adc); + chip->adc = NULL; + if (ret == -EPROBE_DEFER) + return ret; + } chip->base = res; ret = qpnp_tm_read(chip, QPNP_TM_REG_TYPE, &type); if (ret < 0) { dev_err(&pdev->dev, "could not read type\n"); - goto fail; + return ret; } ret = qpnp_tm_read(chip, QPNP_TM_REG_SUBTYPE, &subtype); if (ret < 0) { dev_err(&pdev->dev, "could not read subtype\n"); - goto fail; + return ret; } if (type != QPNP_TM_TYPE || subtype != QPNP_TM_SUBTYPE) { dev_err(&pdev->dev, "invalid type 0x%02x or subtype 0x%02x\n", type, subtype); - ret = -ENODEV; - goto fail; + return -ENODEV; } ret = qpnp_tm_init(chip); if (ret < 0) { dev_err(&pdev->dev, "init failed\n"); - goto fail; + return ret; } ret = devm_request_threaded_irq(&pdev->dev, irq, NULL, qpnp_tm_isr, IRQF_ONESHOT, node->name, chip); if (ret < 0) - goto fail; + return ret; chip->tz_dev = devm_thermal_zone_of_sensor_register(&pdev->dev, 0, chip, &qpnp_tm_sensor_ops); if (IS_ERR(chip->tz_dev)) { dev_err(&pdev->dev, "failed to register sensor\n"); - ret = PTR_ERR(chip->tz_dev); - goto fail; + return PTR_ERR(chip->tz_dev); } return 0; - -fail: - if (!IS_ERR(chip->adc)) - iio_channel_release(chip->adc); - - return ret; -} - -static int qpnp_tm_remove(struct platform_device *pdev) -{ - struct qpnp_tm_chip *chip = dev_get_drvdata(&pdev->dev); - - if (!IS_ERR(chip->adc)) - iio_channel_release(chip->adc); - - return 0; } static const struct of_device_id qpnp_tm_match_table[] = { @@ -299,7 +285,6 @@ static struct platform_driver qpnp_tm_driver = { .of_match_table = qpnp_tm_match_table, }, .probe = qpnp_tm_probe, - .remove = qpnp_tm_remove, }; module_platform_driver(qpnp_tm_driver); -- cgit v1.2.1 From a0678da82ca01771db57f53bfb7f0a5a7494900e Mon Sep 17 00:00:00 2001 From: Kevin Wangtao Date: Sun, 22 Oct 2017 10:54:32 +0200 Subject: thermal/drivers/hisi: Put platform code together Reorganize the code for next patches by moving the functions upper in the file which will prevent a forward declaration. There is no functional change here. Signed-off-by: Kevin Wangtao Tested-by: Daniel Lezcano # hikey6220 Signed-off-by: Daniel Lezcano Signed-off-by: Eduardo Valentin --- drivers/thermal/hisi_thermal.c | 76 +++++++++++++++++++++--------------------- 1 file changed, 38 insertions(+), 38 deletions(-) (limited to 'drivers') diff --git a/drivers/thermal/hisi_thermal.c b/drivers/thermal/hisi_thermal.c index 65f9e5c80741..a0b7e26e4796 100644 --- a/drivers/thermal/hisi_thermal.c +++ b/drivers/thermal/hisi_thermal.c @@ -201,6 +201,44 @@ static void hisi_thermal_disable_sensor(struct hisi_thermal_data *data) clk_disable_unprepare(data->clk); } +static int hisi_thermal_setup(struct hisi_thermal_data *data) +{ + struct hisi_thermal_sensor *sensor = &data->sensor; + int ret; + + /* enable clock for tsensor */ + ret = clk_prepare_enable(data->clk); + if (ret) + return ret; + + /* disable module firstly */ + hisi_thermal_reset_enable(data->regs, 0); + hisi_thermal_enable(data->regs, 0); + + /* select sensor id */ + hisi_thermal_sensor_select(data->regs, sensor->id); + + /* setting the hdak time */ + hisi_thermal_hdak_set(data->regs, 0); + + /* setting lag value between current temp and the threshold */ + hisi_thermal_set_lag(data->regs, HISI_TEMP_LAG); + + /* enable for interrupt */ + hisi_thermal_alarm_set(data->regs, sensor->thres_temp); + + hisi_thermal_reset_set(data->regs, HISI_TEMP_RESET); + + /* enable module */ + hisi_thermal_reset_enable(data->regs, 1); + hisi_thermal_enable(data->regs, 1); + + hisi_thermal_alarm_clear(data->regs, 0); + hisi_thermal_alarm_enable(data->regs, 1); + + return 0; +} + static int hisi_thermal_get_temp(void *__data, int *temp) { struct hisi_thermal_data *data = __data; @@ -291,44 +329,6 @@ static void hisi_thermal_toggle_sensor(struct hisi_thermal_sensor *sensor, on ? THERMAL_DEVICE_ENABLED : THERMAL_DEVICE_DISABLED); } -static int hisi_thermal_setup(struct hisi_thermal_data *data) -{ - struct hisi_thermal_sensor *sensor = &data->sensor; - int ret; - - /* enable clock for tsensor */ - ret = clk_prepare_enable(data->clk); - if (ret) - return ret; - - /* disable module firstly */ - hisi_thermal_reset_enable(data->regs, 0); - hisi_thermal_enable(data->regs, 0); - - /* select sensor id */ - hisi_thermal_sensor_select(data->regs, sensor->id); - - /* setting the hdak time */ - hisi_thermal_hdak_set(data->regs, 0); - - /* setting lag value between current temp and the threshold */ - hisi_thermal_set_lag(data->regs, HISI_TEMP_LAG); - - /* enable for interrupt */ - hisi_thermal_alarm_set(data->regs, sensor->thres_temp); - - hisi_thermal_reset_set(data->regs, HISI_TEMP_RESET); - - /* enable module */ - hisi_thermal_reset_enable(data->regs, 1); - hisi_thermal_enable(data->regs, 1); - - hisi_thermal_alarm_clear(data->regs, 0); - hisi_thermal_alarm_enable(data->regs, 1); - - return 0; -} - static int hisi_thermal_probe(struct platform_device *pdev) { struct hisi_thermal_data *data; -- cgit v1.2.1 From 5ed82b79e526f755bf0630a7c47a31ca2f4a7ad5 Mon Sep 17 00:00:00 2001 From: Kevin Wangtao Date: Sun, 22 Oct 2017 10:54:33 +0200 Subject: thermal/drivers/hisi: Add platform prefix to function name As the next patches will provide support for the hikey3660's sensor, several functions with the same purpose but for different platforms will be introduced. In order to make a clear distinction between them, let's prefix the function names with the platform name. This patch has no functional changes, only name changes. Signed-off-by: Kevin Wangtao Tested-by: Daniel Lezcano # hikey6220 Signed-off-by: Daniel Lezcano Signed-off-by: Eduardo Valentin --- drivers/thermal/hisi_thermal.c | 145 +++++++++++++++++++++-------------------- 1 file changed, 73 insertions(+), 72 deletions(-) (limited to 'drivers') diff --git a/drivers/thermal/hisi_thermal.c b/drivers/thermal/hisi_thermal.c index a0b7e26e4796..c2cb2807372d 100644 --- a/drivers/thermal/hisi_thermal.c +++ b/drivers/thermal/hisi_thermal.c @@ -26,25 +26,24 @@ #include "thermal_core.h" -#define TEMP0_LAG (0x0) -#define TEMP0_TH (0x4) -#define TEMP0_RST_TH (0x8) -#define TEMP0_CFG (0xC) -#define TEMP0_CFG_SS_MSK (0xF000) -#define TEMP0_CFG_HDAK_MSK (0x30) -#define TEMP0_EN (0x10) -#define TEMP0_INT_EN (0x14) -#define TEMP0_INT_CLR (0x18) -#define TEMP0_RST_MSK (0x1C) -#define TEMP0_VALUE (0x28) - -#define HISI_TEMP_BASE (-60000) -#define HISI_TEMP_RESET (100000) -#define HISI_TEMP_STEP (785) -#define HISI_TEMP_LAG (3500) - -#define HISI_MAX_SENSORS 4 -#define HISI_DEFAULT_SENSOR 2 +#define HI6220_TEMP0_LAG (0x0) +#define HI6220_TEMP0_TH (0x4) +#define HI6220_TEMP0_RST_TH (0x8) +#define HI6220_TEMP0_CFG (0xC) +#define HI6220_TEMP0_CFG_SS_MSK (0xF000) +#define HI6220_TEMP0_CFG_HDAK_MSK (0x30) +#define HI6220_TEMP0_EN (0x10) +#define HI6220_TEMP0_INT_EN (0x14) +#define HI6220_TEMP0_INT_CLR (0x18) +#define HI6220_TEMP0_RST_MSK (0x1C) +#define HI6220_TEMP0_VALUE (0x28) + +#define HI6220_TEMP_BASE (-60000) +#define HI6220_TEMP_RESET (100000) +#define HI6220_TEMP_STEP (785) +#define HI6220_TEMP_LAG (3500) + +#define HI6220_DEFAULT_SENSOR 2 struct hisi_thermal_sensor { struct thermal_zone_device *tzd; @@ -78,14 +77,14 @@ struct hisi_thermal_data { * steps = (Temp - TempBase) / 785 * */ -static inline int hisi_thermal_step_to_temp(int step) +static inline int hi6220_thermal_step_to_temp(int step) { - return HISI_TEMP_BASE + (step * HISI_TEMP_STEP); + return HI6220_TEMP_BASE + (step * HI6220_TEMP_STEP); } -static inline int hisi_thermal_temp_to_step(int temp) +static inline int hi6220_thermal_temp_to_step(int temp) { - return DIV_ROUND_UP(temp - HISI_TEMP_BASE, HISI_TEMP_STEP); + return DIV_ROUND_UP(temp - HI6220_TEMP_BASE, HI6220_TEMP_STEP); } /* @@ -112,51 +111,53 @@ static inline int hisi_thermal_temp_to_step(int temp) * * [0:4] : lag register * - * The temperature is coded in steps, cf. HISI_TEMP_STEP. + * The temperature is coded in steps, cf. HI6220_TEMP_STEP. * * Min : 0x00 : 0.0 °C * Max : 0x1F : 24.3 °C * * The 'value' parameter is in milliCelsius. */ -static inline void hisi_thermal_set_lag(void __iomem *addr, int value) +static inline void hi6220_thermal_set_lag(void __iomem *addr, int value) { - writel(DIV_ROUND_UP(value, HISI_TEMP_STEP) & 0x1F, addr + TEMP0_LAG); + writel(DIV_ROUND_UP(value, HI6220_TEMP_STEP) & 0x1F, + addr + HI6220_TEMP0_LAG); } -static inline void hisi_thermal_alarm_clear(void __iomem *addr, int value) +static inline void hi6220_thermal_alarm_clear(void __iomem *addr, int value) { - writel(value, addr + TEMP0_INT_CLR); + writel(value, addr + HI6220_TEMP0_INT_CLR); } -static inline void hisi_thermal_alarm_enable(void __iomem *addr, int value) +static inline void hi6220_thermal_alarm_enable(void __iomem *addr, int value) { - writel(value, addr + TEMP0_INT_EN); + writel(value, addr + HI6220_TEMP0_INT_EN); } -static inline void hisi_thermal_alarm_set(void __iomem *addr, int temp) +static inline void hi6220_thermal_alarm_set(void __iomem *addr, int temp) { - writel(hisi_thermal_temp_to_step(temp) | 0x0FFFFFF00, addr + TEMP0_TH); + writel(hi6220_thermal_temp_to_step(temp) | 0x0FFFFFF00, + addr + HI6220_TEMP0_TH); } -static inline void hisi_thermal_reset_set(void __iomem *addr, int temp) +static inline void hi6220_thermal_reset_set(void __iomem *addr, int temp) { - writel(hisi_thermal_temp_to_step(temp), addr + TEMP0_RST_TH); + writel(hi6220_thermal_temp_to_step(temp), addr + HI6220_TEMP0_RST_TH); } -static inline void hisi_thermal_reset_enable(void __iomem *addr, int value) +static inline void hi6220_thermal_reset_enable(void __iomem *addr, int value) { - writel(value, addr + TEMP0_RST_MSK); + writel(value, addr + HI6220_TEMP0_RST_MSK); } -static inline void hisi_thermal_enable(void __iomem *addr, int value) +static inline void hi6220_thermal_enable(void __iomem *addr, int value) { - writel(value, addr + TEMP0_EN); + writel(value, addr + HI6220_TEMP0_EN); } -static inline int hisi_thermal_get_temperature(void __iomem *addr) +static inline int hi6220_thermal_get_temperature(void __iomem *addr) { - return hisi_thermal_step_to_temp(readl(addr + TEMP0_VALUE)); + return hi6220_thermal_step_to_temp(readl(addr + HI6220_TEMP0_VALUE)); } /* @@ -169,10 +170,10 @@ static inline int hisi_thermal_get_temperature(void __iomem *addr) * 0x2: remote sensor 2 (ACPU cluster 0) * 0x3: remote sensor 3 (G3D) */ -static inline void hisi_thermal_sensor_select(void __iomem *addr, int sensor) +static inline void hi6220_thermal_sensor_select(void __iomem *addr, int sensor) { - writel((readl(addr + TEMP0_CFG) & ~TEMP0_CFG_SS_MSK) | - (sensor << 12), addr + TEMP0_CFG); + writel((readl(addr + HI6220_TEMP0_CFG) & ~HI6220_TEMP0_CFG_SS_MSK) | + (sensor << 12), addr + HI6220_TEMP0_CFG); } /* @@ -185,23 +186,23 @@ static inline void hisi_thermal_sensor_select(void __iomem *addr, int sensor) * 0x2 : 49.152 ms * 0x3 : 393.216 ms */ -static inline void hisi_thermal_hdak_set(void __iomem *addr, int value) +static inline void hi6220_thermal_hdak_set(void __iomem *addr, int value) { - writel((readl(addr + TEMP0_CFG) & ~TEMP0_CFG_HDAK_MSK) | - (value << 4), addr + TEMP0_CFG); + writel((readl(addr + HI6220_TEMP0_CFG) & ~HI6220_TEMP0_CFG_HDAK_MSK) | + (value << 4), addr + HI6220_TEMP0_CFG); } -static void hisi_thermal_disable_sensor(struct hisi_thermal_data *data) +static void hi6220_thermal_disable_sensor(struct hisi_thermal_data *data) { /* disable sensor module */ - hisi_thermal_enable(data->regs, 0); - hisi_thermal_alarm_enable(data->regs, 0); - hisi_thermal_reset_enable(data->regs, 0); + hi6220_thermal_enable(data->regs, 0); + hi6220_thermal_alarm_enable(data->regs, 0); + hi6220_thermal_reset_enable(data->regs, 0); clk_disable_unprepare(data->clk); } -static int hisi_thermal_setup(struct hisi_thermal_data *data) +static int hi6220_thermal_enable_sensor(struct hisi_thermal_data *data) { struct hisi_thermal_sensor *sensor = &data->sensor; int ret; @@ -212,29 +213,29 @@ static int hisi_thermal_setup(struct hisi_thermal_data *data) return ret; /* disable module firstly */ - hisi_thermal_reset_enable(data->regs, 0); - hisi_thermal_enable(data->regs, 0); + hi6220_thermal_reset_enable(data->regs, 0); + hi6220_thermal_enable(data->regs, 0); /* select sensor id */ - hisi_thermal_sensor_select(data->regs, sensor->id); + hi6220_thermal_sensor_select(data->regs, sensor->id); /* setting the hdak time */ - hisi_thermal_hdak_set(data->regs, 0); + hi6220_thermal_hdak_set(data->regs, 0); /* setting lag value between current temp and the threshold */ - hisi_thermal_set_lag(data->regs, HISI_TEMP_LAG); + hi6220_thermal_set_lag(data->regs, HI6220_TEMP_LAG); /* enable for interrupt */ - hisi_thermal_alarm_set(data->regs, sensor->thres_temp); + hi6220_thermal_alarm_set(data->regs, sensor->thres_temp); - hisi_thermal_reset_set(data->regs, HISI_TEMP_RESET); + hi6220_thermal_reset_set(data->regs, HI6220_TEMP_RESET); /* enable module */ - hisi_thermal_reset_enable(data->regs, 1); - hisi_thermal_enable(data->regs, 1); + hi6220_thermal_reset_enable(data->regs, 1); + hi6220_thermal_enable(data->regs, 1); - hisi_thermal_alarm_clear(data->regs, 0); - hisi_thermal_alarm_enable(data->regs, 1); + hi6220_thermal_alarm_clear(data->regs, 0); + hi6220_thermal_alarm_enable(data->regs, 1); return 0; } @@ -244,7 +245,7 @@ static int hisi_thermal_get_temp(void *__data, int *temp) struct hisi_thermal_data *data = __data; struct hisi_thermal_sensor *sensor = &data->sensor; - *temp = hisi_thermal_get_temperature(data->regs); + *temp = hi6220_thermal_get_temperature(data->regs); dev_dbg(&data->pdev->dev, "id=%d, temp=%d, thres=%d\n", sensor->id, *temp, sensor->thres_temp); @@ -260,11 +261,11 @@ static irqreturn_t hisi_thermal_alarm_irq_thread(int irq, void *dev) { struct hisi_thermal_data *data = dev; struct hisi_thermal_sensor *sensor = &data->sensor; - int temp; + int temp = 0; - hisi_thermal_alarm_clear(data->regs, 1); + hi6220_thermal_alarm_clear(data->regs, 1); - temp = hisi_thermal_get_temperature(data->regs); + hisi_thermal_get_temp(data, &temp); if (temp >= sensor->thres_temp) { dev_crit(&data->pdev->dev, "THERMAL ALARM: %d > %d\n", @@ -273,7 +274,7 @@ static irqreturn_t hisi_thermal_alarm_irq_thread(int irq, void *dev) thermal_zone_device_update(data->sensor.tzd, THERMAL_EVENT_UNSPECIFIED); - } else if (temp < sensor->thres_temp) { + } else { dev_crit(&data->pdev->dev, "THERMAL ALARM stopped: %d < %d\n", temp, sensor->thres_temp); } @@ -365,14 +366,14 @@ static int hisi_thermal_probe(struct platform_device *pdev) ret = hisi_thermal_register_sensor(pdev, data, &data->sensor, - HISI_DEFAULT_SENSOR); + HI6220_DEFAULT_SENSOR); if (ret) { dev_err(&pdev->dev, "failed to register thermal sensor: %d\n", ret); return ret; } - ret = hisi_thermal_setup(data); + ret = hi6220_thermal_enable_sensor(data); if (ret) { dev_err(&pdev->dev, "Failed to setup the sensor: %d\n", ret); return ret; @@ -397,7 +398,7 @@ static int hisi_thermal_remove(struct platform_device *pdev) struct hisi_thermal_sensor *sensor = &data->sensor; hisi_thermal_toggle_sensor(sensor, false); - hisi_thermal_disable_sensor(data); + hi6220_thermal_disable_sensor(data); return 0; } @@ -407,7 +408,7 @@ static int hisi_thermal_suspend(struct device *dev) { struct hisi_thermal_data *data = dev_get_drvdata(dev); - hisi_thermal_disable_sensor(data); + hi6220_thermal_disable_sensor(data); return 0; } @@ -416,7 +417,7 @@ static int hisi_thermal_resume(struct device *dev) { struct hisi_thermal_data *data = dev_get_drvdata(dev); - return hisi_thermal_setup(data); + return hi6220_thermal_enable_sensor(data); } #endif -- cgit v1.2.1 From a160a465297362c515db28848b79eb876ceab9c0 Mon Sep 17 00:00:00 2001 From: Kevin Wangtao Date: Sun, 22 Oct 2017 10:54:34 +0200 Subject: thermal/drivers/hisi: Prepare to add support for other hisi platforms For platform compatibility, add the tsensor ops to a thermal data structure. Each platform has its own probe function to register proper tsensor ops function to the pointer, platform related resource request are also implemented in the platform probe function. Signed-off-by: Kevin Wangtao Tested-by: Daniel Lezcano # hikey6220 Signed-off-by: Daniel Lezcano Signed-off-by: Eduardo Valentin --- drivers/thermal/hisi_thermal.c | 132 +++++++++++++++++++++++++++-------------- 1 file changed, 87 insertions(+), 45 deletions(-) (limited to 'drivers') diff --git a/drivers/thermal/hisi_thermal.c b/drivers/thermal/hisi_thermal.c index c2cb2807372d..b862506a588b 100644 --- a/drivers/thermal/hisi_thermal.c +++ b/drivers/thermal/hisi_thermal.c @@ -23,6 +23,7 @@ #include #include #include +#include #include "thermal_core.h" @@ -30,7 +31,7 @@ #define HI6220_TEMP0_TH (0x4) #define HI6220_TEMP0_RST_TH (0x8) #define HI6220_TEMP0_CFG (0xC) -#define HI6220_TEMP0_CFG_SS_MSK (0xF000) +#define HI6220_TEMP0_CFG_SS_MSK (0xF000) #define HI6220_TEMP0_CFG_HDAK_MSK (0x30) #define HI6220_TEMP0_EN (0x10) #define HI6220_TEMP0_INT_EN (0x14) @@ -41,7 +42,7 @@ #define HI6220_TEMP_BASE (-60000) #define HI6220_TEMP_RESET (100000) #define HI6220_TEMP_STEP (785) -#define HI6220_TEMP_LAG (3500) +#define HI6220_TEMP_LAG (3500) #define HI6220_DEFAULT_SENSOR 2 @@ -52,6 +53,10 @@ struct hisi_thermal_sensor { }; struct hisi_thermal_data { + int (*get_temp)(struct hisi_thermal_data *data); + int (*enable_sensor)(struct hisi_thermal_data *data); + int (*disable_sensor)(struct hisi_thermal_data *data); + int (*irq_handler)(struct hisi_thermal_data *data); struct platform_device *pdev; struct clk *clk; struct hisi_thermal_sensor sensor; @@ -192,7 +197,18 @@ static inline void hi6220_thermal_hdak_set(void __iomem *addr, int value) (value << 4), addr + HI6220_TEMP0_CFG); } -static void hi6220_thermal_disable_sensor(struct hisi_thermal_data *data) +static int hi6220_thermal_irq_handler(struct hisi_thermal_data *data) +{ + hi6220_thermal_alarm_clear(data->regs, 1); + return 0; +} + +static int hi6220_thermal_get_temp(struct hisi_thermal_data *data) +{ + return hi6220_thermal_get_temperature(data->regs); +} + +static int hi6220_thermal_disable_sensor(struct hisi_thermal_data *data) { /* disable sensor module */ hi6220_thermal_enable(data->regs, 0); @@ -200,6 +216,8 @@ static void hi6220_thermal_disable_sensor(struct hisi_thermal_data *data) hi6220_thermal_reset_enable(data->regs, 0); clk_disable_unprepare(data->clk); + + return 0; } static int hi6220_thermal_enable_sensor(struct hisi_thermal_data *data) @@ -240,12 +258,48 @@ static int hi6220_thermal_enable_sensor(struct hisi_thermal_data *data) return 0; } +static int hi6220_thermal_probe(struct hisi_thermal_data *data) +{ + struct platform_device *pdev = data->pdev; + struct device *dev = &pdev->dev; + struct resource *res; + int ret; + + data->get_temp = hi6220_thermal_get_temp; + data->enable_sensor = hi6220_thermal_enable_sensor; + data->disable_sensor = hi6220_thermal_disable_sensor; + data->irq_handler = hi6220_thermal_irq_handler; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + data->regs = devm_ioremap_resource(dev, res); + if (IS_ERR(data->regs)) { + dev_err(dev, "failed to get io address\n"); + return PTR_ERR(data->regs); + } + + data->clk = devm_clk_get(dev, "thermal_clk"); + if (IS_ERR(data->clk)) { + ret = PTR_ERR(data->clk); + if (ret != -EPROBE_DEFER) + dev_err(dev, "failed to get thermal clk: %d\n", ret); + return ret; + } + + data->irq = platform_get_irq(pdev, 0); + if (data->irq < 0) + return data->irq; + + data->sensor.id = HI6220_DEFAULT_SENSOR; + + return 0; +} + static int hisi_thermal_get_temp(void *__data, int *temp) { struct hisi_thermal_data *data = __data; struct hisi_thermal_sensor *sensor = &data->sensor; - *temp = hi6220_thermal_get_temperature(data->regs); + *temp = data->get_temp(data); dev_dbg(&data->pdev->dev, "id=%d, temp=%d, thres=%d\n", sensor->id, *temp, sensor->thres_temp); @@ -263,7 +317,7 @@ static irqreturn_t hisi_thermal_alarm_irq_thread(int irq, void *dev) struct hisi_thermal_sensor *sensor = &data->sensor; int temp = 0; - hi6220_thermal_alarm_clear(data->regs, 1); + data->irq_handler(data); hisi_thermal_get_temp(data, &temp); @@ -284,14 +338,11 @@ static irqreturn_t hisi_thermal_alarm_irq_thread(int irq, void *dev) static int hisi_thermal_register_sensor(struct platform_device *pdev, struct hisi_thermal_data *data, - struct hisi_thermal_sensor *sensor, - int index) + struct hisi_thermal_sensor *sensor) { int ret, i; const struct thermal_trip *trip; - sensor->id = index; - sensor->tzd = devm_thermal_zone_of_sensor_register(&pdev->dev, sensor->id, data, &hisi_of_thermal_ops); @@ -316,7 +367,7 @@ static int hisi_thermal_register_sensor(struct platform_device *pdev, } static const struct of_device_id of_hisi_thermal_match[] = { - { .compatible = "hisilicon,tsensor" }, + { .compatible = "hisilicon,tsensor", .data = hi6220_thermal_probe }, { /* end */ } }; MODULE_DEVICE_TABLE(of, of_hisi_thermal_match); @@ -333,58 +384,48 @@ static void hisi_thermal_toggle_sensor(struct hisi_thermal_sensor *sensor, static int hisi_thermal_probe(struct platform_device *pdev) { struct hisi_thermal_data *data; - struct resource *res; + int const (*platform_probe)(struct hisi_thermal_data *); + struct device *dev = &pdev->dev; int ret; - data = devm_kzalloc(&pdev->dev, sizeof(*data), GFP_KERNEL); + data = devm_kzalloc(dev, sizeof(*data), GFP_KERNEL); if (!data) return -ENOMEM; data->pdev = pdev; + platform_set_drvdata(pdev, data); - res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - data->regs = devm_ioremap_resource(&pdev->dev, res); - if (IS_ERR(data->regs)) { - dev_err(&pdev->dev, "failed to get io address\n"); - return PTR_ERR(data->regs); + platform_probe = of_device_get_match_data(dev); + if (!platform_probe) { + dev_err(dev, "failed to get probe func\n"); + return -EINVAL; } - data->irq = platform_get_irq(pdev, 0); - if (data->irq < 0) - return data->irq; - - platform_set_drvdata(pdev, data); - - data->clk = devm_clk_get(&pdev->dev, "thermal_clk"); - if (IS_ERR(data->clk)) { - ret = PTR_ERR(data->clk); - if (ret != -EPROBE_DEFER) - dev_err(&pdev->dev, - "failed to get thermal clk: %d\n", ret); + ret = platform_probe(data); + if (ret) return ret; - } ret = hisi_thermal_register_sensor(pdev, data, - &data->sensor, - HI6220_DEFAULT_SENSOR); + &data->sensor); if (ret) { - dev_err(&pdev->dev, "failed to register thermal sensor: %d\n", - ret); + dev_err(dev, "failed to register thermal sensor: %d\n", ret); return ret; } - ret = hi6220_thermal_enable_sensor(data); + ret = data->enable_sensor(data); if (ret) { - dev_err(&pdev->dev, "Failed to setup the sensor: %d\n", ret); + dev_err(dev, "Failed to setup the sensor: %d\n", ret); return ret; } - ret = devm_request_threaded_irq(&pdev->dev, data->irq, NULL, - hisi_thermal_alarm_irq_thread, - IRQF_ONESHOT, "hisi_thermal", data); - if (ret < 0) { - dev_err(&pdev->dev, "failed to request alarm irq: %d\n", ret); - return ret; + if (data->irq) { + ret = devm_request_threaded_irq(dev, data->irq, NULL, + hisi_thermal_alarm_irq_thread, + IRQF_ONESHOT, "hisi_thermal", data); + if (ret < 0) { + dev_err(dev, "failed to request alarm irq: %d\n", ret); + return ret; + } } hisi_thermal_toggle_sensor(&data->sensor, true); @@ -398,7 +439,8 @@ static int hisi_thermal_remove(struct platform_device *pdev) struct hisi_thermal_sensor *sensor = &data->sensor; hisi_thermal_toggle_sensor(sensor, false); - hi6220_thermal_disable_sensor(data); + + data->disable_sensor(data); return 0; } @@ -408,7 +450,7 @@ static int hisi_thermal_suspend(struct device *dev) { struct hisi_thermal_data *data = dev_get_drvdata(dev); - hi6220_thermal_disable_sensor(data); + data->disable_sensor(data); return 0; } @@ -417,7 +459,7 @@ static int hisi_thermal_resume(struct device *dev) { struct hisi_thermal_data *data = dev_get_drvdata(dev); - return hi6220_thermal_enable_sensor(data); + return data->enable_sensor(data); } #endif -- cgit v1.2.1 From 2bb60a8ea721900c13b580689d647a6423e88104 Mon Sep 17 00:00:00 2001 From: Kevin Wangtao Date: Sun, 22 Oct 2017 10:54:35 +0200 Subject: thermal/drivers/hisi: Add support for hi3660 SoC This patch adds the support for thermal sensor on the Hi3660 SoC. Hi3660 tsensor support alarm in alarm threshold, it also has a configurable hysteresis interval, interrupt will be triggered when temperature rise above the alarm threshold or fall below the hysteresis threshold. Signed-off-by: Kevin Wangtao Tested-by: Daniel Lezcano # hikey6220 Signed-off-by: Daniel Lezcano Signed-off-by: Eduardo Valentin --- drivers/thermal/hisi_thermal.c | 145 ++++++++++++++++++++++++++++++++++++++++- 1 file changed, 144 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/thermal/hisi_thermal.c b/drivers/thermal/hisi_thermal.c index b862506a588b..2d855a96cdd9 100644 --- a/drivers/thermal/hisi_thermal.c +++ b/drivers/thermal/hisi_thermal.c @@ -39,12 +39,24 @@ #define HI6220_TEMP0_RST_MSK (0x1C) #define HI6220_TEMP0_VALUE (0x28) +#define HI3660_OFFSET(chan) ((chan) * 0x40) +#define HI3660_TEMP(chan) (HI3660_OFFSET(chan) + 0x1C) +#define HI3660_TH(chan) (HI3660_OFFSET(chan) + 0x20) +#define HI3660_LAG(chan) (HI3660_OFFSET(chan) + 0x28) +#define HI3660_INT_EN(chan) (HI3660_OFFSET(chan) + 0x2C) +#define HI3660_INT_CLR(chan) (HI3660_OFFSET(chan) + 0x30) + #define HI6220_TEMP_BASE (-60000) #define HI6220_TEMP_RESET (100000) #define HI6220_TEMP_STEP (785) #define HI6220_TEMP_LAG (3500) +#define HI3660_TEMP_BASE (-63780) +#define HI3660_TEMP_STEP (205) +#define HI3660_TEMP_LAG (4000) + #define HI6220_DEFAULT_SENSOR 2 +#define HI3660_DEFAULT_SENSOR 1 struct hisi_thermal_sensor { struct thermal_zone_device *tzd; @@ -92,6 +104,24 @@ static inline int hi6220_thermal_temp_to_step(int temp) return DIV_ROUND_UP(temp - HI6220_TEMP_BASE, HI6220_TEMP_STEP); } +/* + * for Hi3660, + * Step: 189/922 (0.205) + * Temperature base: -63.780°C + * + * The register is programmed in temperature steps, every step is 205 + * millidegree and begins at -63 780 m°C + */ +static inline int hi3660_thermal_step_to_temp(int step) +{ + return HI3660_TEMP_BASE + step * HI3660_TEMP_STEP; +} + +static inline int hi3660_thermal_temp_to_step(int temp) +{ + return DIV_ROUND_UP(temp - HI3660_TEMP_BASE, HI3660_TEMP_STEP); +} + /* * The lag register contains 5 bits encoding the temperature in steps. * @@ -165,6 +195,45 @@ static inline int hi6220_thermal_get_temperature(void __iomem *addr) return hi6220_thermal_step_to_temp(readl(addr + HI6220_TEMP0_VALUE)); } +/* + * [0:6] lag register + * + * The temperature is coded in steps, cf. HI3660_TEMP_STEP. + * + * Min : 0x00 : 0.0 °C + * Max : 0x7F : 26.0 °C + * + */ +static inline void hi3660_thermal_set_lag(void __iomem *addr, + int id, int value) +{ + writel(DIV_ROUND_UP(value, HI3660_TEMP_STEP) & 0x7F, + addr + HI3660_LAG(id)); +} + +static inline void hi3660_thermal_alarm_clear(void __iomem *addr, + int id, int value) +{ + writel(value, addr + HI3660_INT_CLR(id)); +} + +static inline void hi3660_thermal_alarm_enable(void __iomem *addr, + int id, int value) +{ + writel(value, addr + HI3660_INT_EN(id)); +} + +static inline void hi3660_thermal_alarm_set(void __iomem *addr, + int id, int value) +{ + writel(value, addr + HI3660_TH(id)); +} + +static inline int hi3660_thermal_get_temperature(void __iomem *addr, int id) +{ + return hi3660_thermal_step_to_temp(readl(addr + HI3660_TEMP(id))); +} + /* * Temperature configuration register - Sensor selection * @@ -203,11 +272,22 @@ static int hi6220_thermal_irq_handler(struct hisi_thermal_data *data) return 0; } +static int hi3660_thermal_irq_handler(struct hisi_thermal_data *data) +{ + hi3660_thermal_alarm_clear(data->regs, data->sensor.id, 1); + return 0; +} + static int hi6220_thermal_get_temp(struct hisi_thermal_data *data) { return hi6220_thermal_get_temperature(data->regs); } +static int hi3660_thermal_get_temp(struct hisi_thermal_data *data) +{ + return hi3660_thermal_get_temperature(data->regs, data->sensor.id); +} + static int hi6220_thermal_disable_sensor(struct hisi_thermal_data *data) { /* disable sensor module */ @@ -220,6 +300,13 @@ static int hi6220_thermal_disable_sensor(struct hisi_thermal_data *data) return 0; } +static int hi3660_thermal_disable_sensor(struct hisi_thermal_data *data) +{ + /* disable sensor module */ + hi3660_thermal_alarm_enable(data->regs, data->sensor.id, 0); + return 0; +} + static int hi6220_thermal_enable_sensor(struct hisi_thermal_data *data) { struct hisi_thermal_sensor *sensor = &data->sensor; @@ -258,6 +345,28 @@ static int hi6220_thermal_enable_sensor(struct hisi_thermal_data *data) return 0; } +static int hi3660_thermal_enable_sensor(struct hisi_thermal_data *data) +{ + unsigned int value; + struct hisi_thermal_sensor *sensor = &data->sensor; + + /* disable interrupt */ + hi3660_thermal_alarm_enable(data->regs, sensor->id, 0); + + /* setting lag value between current temp and the threshold */ + hi3660_thermal_set_lag(data->regs, sensor->id, HI3660_TEMP_LAG); + + /* set interrupt threshold */ + value = hi3660_thermal_temp_to_step(sensor->thres_temp); + hi3660_thermal_alarm_set(data->regs, sensor->id, value); + + /* enable interrupt */ + hi3660_thermal_alarm_clear(data->regs, sensor->id, 1); + hi3660_thermal_alarm_enable(data->regs, sensor->id, 1); + + return 0; +} + static int hi6220_thermal_probe(struct hisi_thermal_data *data) { struct platform_device *pdev = data->pdev; @@ -294,6 +403,33 @@ static int hi6220_thermal_probe(struct hisi_thermal_data *data) return 0; } +static int hi3660_thermal_probe(struct hisi_thermal_data *data) +{ + struct platform_device *pdev = data->pdev; + struct device *dev = &pdev->dev; + struct resource *res; + + data->get_temp = hi3660_thermal_get_temp; + data->enable_sensor = hi3660_thermal_enable_sensor; + data->disable_sensor = hi3660_thermal_disable_sensor; + data->irq_handler = hi3660_thermal_irq_handler; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + data->regs = devm_ioremap_resource(dev, res); + if (IS_ERR(data->regs)) { + dev_err(dev, "failed to get io address\n"); + return PTR_ERR(data->regs); + } + + data->irq = platform_get_irq(pdev, 0); + if (data->irq < 0) + return data->irq; + + data->sensor.id = HI3660_DEFAULT_SENSOR; + + return 0; +} + static int hisi_thermal_get_temp(void *__data, int *temp) { struct hisi_thermal_data *data = __data; @@ -367,7 +503,14 @@ static int hisi_thermal_register_sensor(struct platform_device *pdev, } static const struct of_device_id of_hisi_thermal_match[] = { - { .compatible = "hisilicon,tsensor", .data = hi6220_thermal_probe }, + { + .compatible = "hisilicon,tsensor", + .data = hi6220_thermal_probe + }, + { + .compatible = "hisilicon,hi3660-tsensor", + .data = hi3660_thermal_probe + }, { /* end */ } }; MODULE_DEVICE_TABLE(of, of_hisi_thermal_match); -- cgit v1.2.1 From 9e03cf1b2dd54733d0d2c5811b78257d78562c03 Mon Sep 17 00:00:00 2001 From: Brian Norris Date: Tue, 26 Sep 2017 14:27:59 -0700 Subject: thermal: add brcmstb AVS TMON driver The AVS TMON core provides temperature readings, a pair of configurable high- and low-temperature threshold interrupts, and an emergency over-temperature chip reset. The driver utilizes the first two to provide temperature readings and high-temperature notifications to applications. The over-temperature reset is not exposed to applications; this reset threshold is critical to the system and should be set with care within the bootloader. Applications may choose to utilize the notification mechanism, the temperature reading mechanism (e.g., through polling), or both. Signed-off-by: Brian Norris Signed-off-by: Doug Berger Signed-off-by: Markus Mayer Signed-off-by: Eduardo Valentin --- drivers/thermal/Kconfig | 2 +- drivers/thermal/broadcom/Kconfig | 7 + drivers/thermal/broadcom/Makefile | 1 + drivers/thermal/broadcom/brcmstb_thermal.c | 387 +++++++++++++++++++++++++++++ 4 files changed, 396 insertions(+), 1 deletion(-) create mode 100644 drivers/thermal/broadcom/brcmstb_thermal.c (limited to 'drivers') diff --git a/drivers/thermal/Kconfig b/drivers/thermal/Kconfig index e3f0d1fd1720..c70f6bfd9e85 100644 --- a/drivers/thermal/Kconfig +++ b/drivers/thermal/Kconfig @@ -408,7 +408,7 @@ config MTK_THERMAL controller present in Mediatek SoCs menu "Broadcom thermal drivers" -depends on ARCH_BCM || ARCH_BCM2835 || COMPILE_TEST +depends on ARCH_BCM || ARCH_BRCMSTB || ARCH_BCM2835 || COMPILE_TEST source "drivers/thermal/broadcom/Kconfig" endmenu diff --git a/drivers/thermal/broadcom/Kconfig b/drivers/thermal/broadcom/Kconfig index 42c098e86f84..c106a15bf7f9 100644 --- a/drivers/thermal/broadcom/Kconfig +++ b/drivers/thermal/broadcom/Kconfig @@ -6,6 +6,13 @@ config BCM2835_THERMAL help Support for thermal sensors on Broadcom bcm2835 SoCs. +config BRCMSTB_THERMAL + tristate "Broadcom STB AVS TMON thermal driver" + depends on ARCH_BRCMSTB || COMPILE_TEST + help + Enable this driver if you have a Broadcom STB SoC and would like + thermal framework support. + config BCM_NS_THERMAL tristate "Northstar thermal driver" depends on ARCH_BCM_IPROC || COMPILE_TEST diff --git a/drivers/thermal/broadcom/Makefile b/drivers/thermal/broadcom/Makefile index c6f62e4fd0ee..fae10ecafaef 100644 --- a/drivers/thermal/broadcom/Makefile +++ b/drivers/thermal/broadcom/Makefile @@ -1,2 +1,3 @@ obj-$(CONFIG_BCM2835_THERMAL) += bcm2835_thermal.o +obj-$(CONFIG_BRCMSTB_THERMAL) += brcmstb_thermal.o obj-$(CONFIG_BCM_NS_THERMAL) += ns-thermal.o diff --git a/drivers/thermal/broadcom/brcmstb_thermal.c b/drivers/thermal/broadcom/brcmstb_thermal.c new file mode 100644 index 000000000000..1919f91fa756 --- /dev/null +++ b/drivers/thermal/broadcom/brcmstb_thermal.c @@ -0,0 +1,387 @@ +/* + * Broadcom STB AVS TMON thermal sensor driver + * + * Copyright (c) 2015-2017 Broadcom + * + * This software is licensed under the terms of the GNU General Public + * License version 2, as published by the Free Software Foundation, and + * may be copied, distributed, and modified under those terms. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + */ + +#define DRV_NAME "brcmstb_thermal" + +#define pr_fmt(fmt) DRV_NAME ": " fmt + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define AVS_TMON_STATUS 0x00 + #define AVS_TMON_STATUS_valid_msk BIT(11) + #define AVS_TMON_STATUS_data_msk GENMASK(10, 1) + #define AVS_TMON_STATUS_data_shift 1 + +#define AVS_TMON_EN_OVERTEMP_RESET 0x04 + #define AVS_TMON_EN_OVERTEMP_RESET_msk BIT(0) + +#define AVS_TMON_RESET_THRESH 0x08 + #define AVS_TMON_RESET_THRESH_msk GENMASK(10, 1) + #define AVS_TMON_RESET_THRESH_shift 1 + +#define AVS_TMON_INT_IDLE_TIME 0x10 + +#define AVS_TMON_EN_TEMP_INT_SRCS 0x14 + #define AVS_TMON_EN_TEMP_INT_SRCS_high BIT(1) + #define AVS_TMON_EN_TEMP_INT_SRCS_low BIT(0) + +#define AVS_TMON_INT_THRESH 0x18 + #define AVS_TMON_INT_THRESH_high_msk GENMASK(26, 17) + #define AVS_TMON_INT_THRESH_high_shift 17 + #define AVS_TMON_INT_THRESH_low_msk GENMASK(10, 1) + #define AVS_TMON_INT_THRESH_low_shift 1 + +#define AVS_TMON_TEMP_INT_CODE 0x1c +#define AVS_TMON_TP_TEST_ENABLE 0x20 + +/* Default coefficients */ +#define AVS_TMON_TEMP_SLOPE -487 +#define AVS_TMON_TEMP_OFFSET 410040 + +/* HW related temperature constants */ +#define AVS_TMON_TEMP_MAX 0x3ff +#define AVS_TMON_TEMP_MIN -88161 +#define AVS_TMON_TEMP_MASK AVS_TMON_TEMP_MAX + +enum avs_tmon_trip_type { + TMON_TRIP_TYPE_LOW = 0, + TMON_TRIP_TYPE_HIGH, + TMON_TRIP_TYPE_RESET, + TMON_TRIP_TYPE_MAX, +}; + +struct avs_tmon_trip { + /* HW bit to enable the trip */ + u32 enable_offs; + u32 enable_mask; + + /* HW field to read the trip temperature */ + u32 reg_offs; + u32 reg_msk; + int reg_shift; +}; + +static struct avs_tmon_trip avs_tmon_trips[] = { + /* Trips when temperature is below threshold */ + [TMON_TRIP_TYPE_LOW] = { + .enable_offs = AVS_TMON_EN_TEMP_INT_SRCS, + .enable_mask = AVS_TMON_EN_TEMP_INT_SRCS_low, + .reg_offs = AVS_TMON_INT_THRESH, + .reg_msk = AVS_TMON_INT_THRESH_low_msk, + .reg_shift = AVS_TMON_INT_THRESH_low_shift, + }, + /* Trips when temperature is above threshold */ + [TMON_TRIP_TYPE_HIGH] = { + .enable_offs = AVS_TMON_EN_TEMP_INT_SRCS, + .enable_mask = AVS_TMON_EN_TEMP_INT_SRCS_high, + .reg_offs = AVS_TMON_INT_THRESH, + .reg_msk = AVS_TMON_INT_THRESH_high_msk, + .reg_shift = AVS_TMON_INT_THRESH_high_shift, + }, + /* Automatically resets chip when above threshold */ + [TMON_TRIP_TYPE_RESET] = { + .enable_offs = AVS_TMON_EN_OVERTEMP_RESET, + .enable_mask = AVS_TMON_EN_OVERTEMP_RESET_msk, + .reg_offs = AVS_TMON_RESET_THRESH, + .reg_msk = AVS_TMON_RESET_THRESH_msk, + .reg_shift = AVS_TMON_RESET_THRESH_shift, + }, +}; + +struct brcmstb_thermal_priv { + void __iomem *tmon_base; + struct device *dev; + struct thermal_zone_device *thermal; +}; + +static void avs_tmon_get_coeffs(struct thermal_zone_device *tz, int *slope, + int *offset) +{ + *slope = thermal_zone_get_slope(tz); + *offset = thermal_zone_get_offset(tz); +} + +/* Convert a HW code to a temperature reading (millidegree celsius) */ +static inline int avs_tmon_code_to_temp(struct thermal_zone_device *tz, + u32 code) +{ + const int val = code & AVS_TMON_TEMP_MASK; + int slope, offset; + + avs_tmon_get_coeffs(tz, &slope, &offset); + + return slope * val + offset; +} + +/* + * Convert a temperature value (millidegree celsius) to a HW code + * + * @temp: temperature to convert + * @low: if true, round toward the low side + */ +static inline u32 avs_tmon_temp_to_code(struct thermal_zone_device *tz, + int temp, bool low) +{ + int slope, offset; + + if (temp < AVS_TMON_TEMP_MIN) + return AVS_TMON_TEMP_MAX; /* Maximum code value */ + + avs_tmon_get_coeffs(tz, &slope, &offset); + + if (temp >= offset) + return 0; /* Minimum code value */ + + if (low) + return (u32)(DIV_ROUND_UP(offset - temp, abs(slope))); + else + return (u32)((offset - temp) / abs(slope)); +} + +static int brcmstb_get_temp(void *data, int *temp) +{ + struct brcmstb_thermal_priv *priv = data; + u32 val; + long t; + + val = __raw_readl(priv->tmon_base + AVS_TMON_STATUS); + + if (!(val & AVS_TMON_STATUS_valid_msk)) { + dev_err(priv->dev, "reading not valid\n"); + return -EIO; + } + + val = (val & AVS_TMON_STATUS_data_msk) >> AVS_TMON_STATUS_data_shift; + + t = avs_tmon_code_to_temp(priv->thermal, val); + if (t < 0) + *temp = 0; + else + *temp = t; + + return 0; +} + +static void avs_tmon_trip_enable(struct brcmstb_thermal_priv *priv, + enum avs_tmon_trip_type type, int en) +{ + struct avs_tmon_trip *trip = &avs_tmon_trips[type]; + u32 val = __raw_readl(priv->tmon_base + trip->enable_offs); + + dev_dbg(priv->dev, "%sable trip, type %d\n", en ? "en" : "dis", type); + + if (en) + val |= trip->enable_mask; + else + val &= ~trip->enable_mask; + + __raw_writel(val, priv->tmon_base + trip->enable_offs); +} + +static int avs_tmon_get_trip_temp(struct brcmstb_thermal_priv *priv, + enum avs_tmon_trip_type type) +{ + struct avs_tmon_trip *trip = &avs_tmon_trips[type]; + u32 val = __raw_readl(priv->tmon_base + trip->reg_offs); + + val &= trip->reg_msk; + val >>= trip->reg_shift; + + return avs_tmon_code_to_temp(priv->thermal, val); +} + +static void avs_tmon_set_trip_temp(struct brcmstb_thermal_priv *priv, + enum avs_tmon_trip_type type, + int temp) +{ + struct avs_tmon_trip *trip = &avs_tmon_trips[type]; + u32 val, orig; + + dev_dbg(priv->dev, "set temp %d to %d\n", type, temp); + + /* round toward low temp for the low interrupt */ + val = avs_tmon_temp_to_code(priv->thermal, temp, + type == TMON_TRIP_TYPE_LOW); + + val <<= trip->reg_shift; + val &= trip->reg_msk; + + orig = __raw_readl(priv->tmon_base + trip->reg_offs); + orig &= ~trip->reg_msk; + orig |= val; + __raw_writel(orig, priv->tmon_base + trip->reg_offs); +} + +static int avs_tmon_get_intr_temp(struct brcmstb_thermal_priv *priv) +{ + u32 val; + + val = __raw_readl(priv->tmon_base + AVS_TMON_TEMP_INT_CODE); + return avs_tmon_code_to_temp(priv->thermal, val); +} + +static irqreturn_t brcmstb_tmon_irq_thread(int irq, void *data) +{ + struct brcmstb_thermal_priv *priv = data; + int low, high, intr; + + low = avs_tmon_get_trip_temp(priv, TMON_TRIP_TYPE_LOW); + high = avs_tmon_get_trip_temp(priv, TMON_TRIP_TYPE_HIGH); + intr = avs_tmon_get_intr_temp(priv); + + dev_dbg(priv->dev, "low/intr/high: %d/%d/%d\n", + low, intr, high); + + /* Disable high-temp until next threshold shift */ + if (intr >= high) + avs_tmon_trip_enable(priv, TMON_TRIP_TYPE_HIGH, 0); + /* Disable low-temp until next threshold shift */ + if (intr <= low) + avs_tmon_trip_enable(priv, TMON_TRIP_TYPE_LOW, 0); + + /* + * Notify using the interrupt temperature, in case the temperature + * changes before it can next be read out + */ + thermal_zone_device_update(priv->thermal, intr); + + return IRQ_HANDLED; +} + +static int brcmstb_set_trips(void *data, int low, int high) +{ + struct brcmstb_thermal_priv *priv = data; + + dev_dbg(priv->dev, "set trips %d <--> %d\n", low, high); + + /* + * Disable low-temp if "low" is too small. As per thermal framework + * API, we use -INT_MAX rather than INT_MIN. + */ + if (low <= -INT_MAX) { + avs_tmon_trip_enable(priv, TMON_TRIP_TYPE_LOW, 0); + } else { + avs_tmon_set_trip_temp(priv, TMON_TRIP_TYPE_LOW, low); + avs_tmon_trip_enable(priv, TMON_TRIP_TYPE_LOW, 1); + } + + /* Disable high-temp if "high" is too big. */ + if (high == INT_MAX) { + avs_tmon_trip_enable(priv, TMON_TRIP_TYPE_HIGH, 0); + } else { + avs_tmon_set_trip_temp(priv, TMON_TRIP_TYPE_HIGH, high); + avs_tmon_trip_enable(priv, TMON_TRIP_TYPE_HIGH, 1); + } + + return 0; +} + +static struct thermal_zone_of_device_ops of_ops = { + .get_temp = brcmstb_get_temp, + .set_trips = brcmstb_set_trips, +}; + +static const struct of_device_id brcmstb_thermal_id_table[] = { + { .compatible = "brcm,avs-tmon" }, + {}, +}; +MODULE_DEVICE_TABLE(of, brcmstb_thermal_id_table); + +static int brcmstb_thermal_probe(struct platform_device *pdev) +{ + struct thermal_zone_device *thermal; + struct brcmstb_thermal_priv *priv; + struct resource *res; + int irq, ret; + + priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL); + if (!priv) + return -ENOMEM; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + priv->tmon_base = devm_ioremap_resource(&pdev->dev, res); + if (IS_ERR(priv->tmon_base)) + return PTR_ERR(priv->tmon_base); + + priv->dev = &pdev->dev; + platform_set_drvdata(pdev, priv); + + thermal = thermal_zone_of_sensor_register(&pdev->dev, 0, priv, &of_ops); + if (IS_ERR(thermal)) { + ret = PTR_ERR(thermal); + dev_err(&pdev->dev, "could not register sensor: %d\n", ret); + return ret; + } + + priv->thermal = thermal; + + irq = platform_get_irq(pdev, 0); + if (irq < 0) { + dev_err(&pdev->dev, "could not get IRQ\n"); + ret = irq; + goto err; + } + ret = devm_request_threaded_irq(&pdev->dev, irq, NULL, + brcmstb_tmon_irq_thread, IRQF_ONESHOT, + DRV_NAME, priv); + if (ret < 0) { + dev_err(&pdev->dev, "could not request IRQ: %d\n", ret); + goto err; + } + + dev_info(&pdev->dev, "registered AVS TMON of-sensor driver\n"); + + return 0; + +err: + thermal_zone_of_sensor_unregister(&pdev->dev, thermal); + return ret; +} + +static int brcmstb_thermal_exit(struct platform_device *pdev) +{ + struct brcmstb_thermal_priv *priv = platform_get_drvdata(pdev); + struct thermal_zone_device *thermal = priv->thermal; + + if (thermal) + thermal_zone_of_sensor_unregister(&pdev->dev, priv->thermal); + + return 0; +} + +static struct platform_driver brcmstb_thermal_driver = { + .probe = brcmstb_thermal_probe, + .remove = brcmstb_thermal_exit, + .driver = { + .name = DRV_NAME, + .of_match_table = brcmstb_thermal_id_table, + }, +}; +module_platform_driver(brcmstb_thermal_driver); + +MODULE_LICENSE("GPL v2"); +MODULE_AUTHOR("Brian Norris"); +MODULE_DESCRIPTION("Broadcom STB AVS TMON thermal driver"); -- cgit v1.2.1 From b2fd708ffa7f43ce8680271924e1771e26a3ec91 Mon Sep 17 00:00:00 2001 From: Arvind Yadav Date: Tue, 24 Oct 2017 13:20:39 +0530 Subject: thermal: cpu_cooling: pr_err() strings should end with newlines pr_err() messages should end with a new-line to avoid other messages being concatenated. Acked-by: Viresh Kumar Acked-by: Javi Merino Signed-off-by: Arvind Yadav Signed-off-by: Eduardo Valentin --- drivers/thermal/cpu_cooling.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/thermal/cpu_cooling.c b/drivers/thermal/cpu_cooling.c index 908a8014cf76..dc63aba092e4 100644 --- a/drivers/thermal/cpu_cooling.c +++ b/drivers/thermal/cpu_cooling.c @@ -696,7 +696,7 @@ __cpufreq_cooling_register(struct device_node *np, bool first; if (IS_ERR_OR_NULL(policy)) { - pr_err("%s: cpufreq policy isn't valid: %p", __func__, policy); + pr_err("%s: cpufreq policy isn't valid: %p\n", __func__, policy); return ERR_PTR(-EINVAL); } -- cgit v1.2.1 From d83870a5bedeca22027cb5e81cdd1e6975e02f81 Mon Sep 17 00:00:00 2001 From: Colin Ian King Date: Wed, 1 Nov 2017 09:41:18 +0000 Subject: thermal: bxt: remove redundant variable trip Variable trip is assigned but never read, hence it is redundant and can be removed. Cleans up clang warning: drivers/thermal/intel_bxt_pmic_thermal.c:204:4: warning: Value stored to 'trip' is never read Signed-off-by: Colin Ian King Signed-off-by: Zhang Rui --- drivers/thermal/intel_bxt_pmic_thermal.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/thermal/intel_bxt_pmic_thermal.c b/drivers/thermal/intel_bxt_pmic_thermal.c index ef6b32242ccb..94cfd0064c43 100644 --- a/drivers/thermal/intel_bxt_pmic_thermal.c +++ b/drivers/thermal/intel_bxt_pmic_thermal.c @@ -166,7 +166,7 @@ static irqreturn_t pmic_thermal_irq_handler(int irq, void *data) struct pmic_thermal_data *td; struct intel_soc_pmic *pmic; struct regmap *regmap; - u8 reg_val, mask, irq_stat, trip; + u8 reg_val, mask, irq_stat; u16 reg, evt_stat_reg; int i, j, ret; @@ -201,7 +201,6 @@ static irqreturn_t pmic_thermal_irq_handler(int irq, void *data) if (regmap_read(regmap, evt_stat_reg, &ret)) return IRQ_HANDLED; - trip = td->maps[i].trip_config[j].trip_num; tzd = thermal_zone_get_zone_by_name(td->maps[i].handle); if (!IS_ERR(tzd)) thermal_zone_device_update(tzd, -- cgit v1.2.1 From 42c0a36c1c96382e4f9ce158abc64276751bd505 Mon Sep 17 00:00:00 2001 From: Srinivas Pandruvada Date: Wed, 1 Nov 2017 09:39:49 -0700 Subject: thermal: int340x: processor_thermal: Add Cannon Lake support Added PCI-ID of Cannon Lake thermal device. Signed-off-by: Srinivas Pandruvada Signed-off-by: Zhang Rui --- drivers/thermal/int340x_thermal/processor_thermal_device.c | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'drivers') diff --git a/drivers/thermal/int340x_thermal/processor_thermal_device.c b/drivers/thermal/int340x_thermal/processor_thermal_device.c index f02341f7134d..e724a23d250e 100644 --- a/drivers/thermal/int340x_thermal/processor_thermal_device.c +++ b/drivers/thermal/int340x_thermal/processor_thermal_device.c @@ -30,6 +30,9 @@ /* Skylake thermal reporting device */ #define PCI_DEVICE_ID_PROC_SKL_THERMAL 0x1903 +/* CannonLake thermal reporting device */ +#define PCI_DEVICE_ID_PROC_CNL_THERMAL 0x5a03 + /* Braswell thermal reporting device */ #define PCI_DEVICE_ID_PROC_BSW_THERMAL 0x22DC @@ -461,6 +464,7 @@ static const struct pci_device_id proc_thermal_pci_ids[] = { { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_PROC_BXT1_THERMAL)}, { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_PROC_BXTX_THERMAL)}, { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_PROC_BXTP_THERMAL)}, + { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_PROC_CNL_THERMAL)}, { 0, }, }; -- cgit v1.2.1 From eea4a69a4636867b18b6ba414b964cdc21c53789 Mon Sep 17 00:00:00 2001 From: Srinivas Pandruvada Date: Wed, 1 Nov 2017 09:39:50 -0700 Subject: thermal: int340x: processor_thermal: Add Coffee Lake support Add new PCI id for Coffee lake processor thermal device. Signed-off-by: Srinivas Pandruvada Signed-off-by: Zhang Rui --- drivers/thermal/int340x_thermal/processor_thermal_device.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'drivers') diff --git a/drivers/thermal/int340x_thermal/processor_thermal_device.c b/drivers/thermal/int340x_thermal/processor_thermal_device.c index e724a23d250e..80bbf9ce2fb6 100644 --- a/drivers/thermal/int340x_thermal/processor_thermal_device.c +++ b/drivers/thermal/int340x_thermal/processor_thermal_device.c @@ -32,6 +32,7 @@ /* CannonLake thermal reporting device */ #define PCI_DEVICE_ID_PROC_CNL_THERMAL 0x5a03 +#define PCI_DEVICE_ID_PROC_CFL_THERMAL 0x3E83 /* Braswell thermal reporting device */ #define PCI_DEVICE_ID_PROC_BSW_THERMAL 0x22DC @@ -465,6 +466,7 @@ static const struct pci_device_id proc_thermal_pci_ids[] = { { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_PROC_BXTX_THERMAL)}, { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_PROC_BXTP_THERMAL)}, { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_PROC_CNL_THERMAL)}, + { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_PROC_CFL_THERMAL)}, { 0, }, }; -- cgit v1.2.1 From 6ed5ed14e25914dab92ed492565f6feb80ae0559 Mon Sep 17 00:00:00 2001 From: Srinivas Pandruvada Date: Wed, 1 Nov 2017 09:39:51 -0700 Subject: thermal: pch: Add Cannon Lake support Added Cannon Lake PCH ids. Signed-off-by: Srinivas Pandruvada Signed-off-by: Zhang Rui --- drivers/thermal/intel_pch_thermal.c | 11 +++++++++++ 1 file changed, 11 insertions(+) (limited to 'drivers') diff --git a/drivers/thermal/intel_pch_thermal.c b/drivers/thermal/intel_pch_thermal.c index c60b1cfcc64e..8a7f69b4b022 100644 --- a/drivers/thermal/intel_pch_thermal.c +++ b/drivers/thermal/intel_pch_thermal.c @@ -30,6 +30,8 @@ #define PCH_THERMAL_DID_WPT 0x9CA4 /* Wildcat Point */ #define PCH_THERMAL_DID_SKL 0x9D31 /* Skylake PCH */ #define PCH_THERMAL_DID_SKL_H 0xA131 /* Skylake PCH 100 series */ +#define PCH_THERMAL_DID_CNL 0x9Df9 /* CNL PCH */ +#define PCH_THERMAL_DID_CNL_H 0xA379 /* CNL-H PCH */ /* Wildcat Point-LP PCH Thermal registers */ #define WPT_TEMP 0x0000 /* Temperature */ @@ -278,6 +280,7 @@ enum board_ids { board_hsw, board_wpt, board_skl, + board_cnl, }; static const struct board_info { @@ -296,6 +299,10 @@ static const struct board_info { .name = "pch_skylake", .ops = &pch_dev_ops_wpt, }, + [board_cnl] = { + .name = "pch_cannonlake", + .ops = &pch_dev_ops_wpt, + }, }; static int intel_pch_thermal_probe(struct pci_dev *pdev, @@ -398,6 +405,10 @@ static const struct pci_device_id intel_pch_thermal_id[] = { .driver_data = board_skl, }, { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCH_THERMAL_DID_SKL_H), .driver_data = board_skl, }, + { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCH_THERMAL_DID_CNL), + .driver_data = board_cnl, }, + { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCH_THERMAL_DID_CNL_H), + .driver_data = board_cnl, }, { 0, }, }; MODULE_DEVICE_TABLE(pci, intel_pch_thermal_id); -- cgit v1.2.1