From 467a44b0372d8268ce5bd90e58bde7db51c1d476 Mon Sep 17 00:00:00 2001 From: Alexandre Belloni Date: Sat, 3 May 2014 16:57:00 +0100 Subject: iio: adc: at91_adc: Repair broken platform_data support Trying to use the at91_adc driver while not using device tree is ending up in a kernel crash: Unable to handle kernel NULL pointer dereference at virtual address 00000004 [...] [] (at91_adc_probe) from [] (platform_drv_probe+0x18/0x48) [] (platform_drv_probe) from [] (driver_probe_device+0x100/0x218) [] (driver_probe_device) from [] (__driver_attach+0x8c/0x90) [] (__driver_attach) from [] (bus_for_each_dev+0x58/0x88) [] (bus_for_each_dev) from [] (bus_add_driver+0xd4/0x1d4) [] (bus_add_driver) from [] (driver_register+0x78/0xf4) [] (driver_register) from [] (do_one_initcall+0xe8/0x14c) [] (do_one_initcall) from [] (kernel_init_freeable+0xec/0x1b4) [] (kernel_init_freeable) from [] (kernel_init+0x8/0xe4) [] (kernel_init) from [] (ret_from_fork+0x14/0x24) This is because the at91_adc_caps structure is mandatory but is not filled when using platform_data. Correct that by using an id_table. It ensues that the driver will not match "at91_adc" anymore but it was crashing anyway. Fixes: c46016665fff (iio: at91: ADC start-up time calculation changed since at91sam9x5) Cc: stable@vger.kernel.org # v3.13+ Signed-off-by: Alexandre Belloni Tested-by: Josh Wu Acked-by: Josh Wu Signed-off-by: Jonathan Cameron --- drivers/iio/adc/at91_adc.c | 26 ++++++++++++++++++++++---- 1 file changed, 22 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/iio/adc/at91_adc.c b/drivers/iio/adc/at91_adc.c index 5b1aa027c034..bbba014c9939 100644 --- a/drivers/iio/adc/at91_adc.c +++ b/drivers/iio/adc/at91_adc.c @@ -765,14 +765,17 @@ static int at91_adc_probe_pdata(struct at91_adc_state *st, if (!pdata) return -EINVAL; + st->caps = (struct at91_adc_caps *) + platform_get_device_id(pdev)->driver_data; + st->use_external = pdata->use_external_triggers; st->vref_mv = pdata->vref; st->channels_mask = pdata->channels_used; - st->num_channels = pdata->num_channels; + st->num_channels = st->caps->num_channels; st->startup_time = pdata->startup_time; st->trigger_number = pdata->trigger_number; st->trigger_list = pdata->trigger_list; - st->registers = pdata->registers; + st->registers = &st->caps->registers; return 0; } @@ -1101,7 +1104,6 @@ static int at91_adc_remove(struct platform_device *pdev) return 0; } -#ifdef CONFIG_OF static struct at91_adc_caps at91sam9260_caps = { .calc_startup_ticks = calc_startup_ticks_9260, .num_channels = 4, @@ -1154,11 +1156,27 @@ static const struct of_device_id at91_adc_dt_ids[] = { {}, }; MODULE_DEVICE_TABLE(of, at91_adc_dt_ids); -#endif + +static const struct platform_device_id at91_adc_ids[] = { + { + .name = "at91sam9260-adc", + .driver_data = (unsigned long)&at91sam9260_caps, + }, { + .name = "at91sam9g45-adc", + .driver_data = (unsigned long)&at91sam9g45_caps, + }, { + .name = "at91sam9x5-adc", + .driver_data = (unsigned long)&at91sam9x5_caps, + }, { + /* terminator */ + } +}; +MODULE_DEVICE_TABLE(platform, at91_adc_ids); static struct platform_driver at91_adc_driver = { .probe = at91_adc_probe, .remove = at91_adc_remove, + .id_table = at91_adc_ids, .driver = { .name = DRIVER_NAME, .of_match_table = of_match_ptr(at91_adc_dt_ids), -- cgit v1.2.1 From 41c897f8789d0d1039ed873ddcd0caabd5756e0f Mon Sep 17 00:00:00 2001 From: Beomho Seo Date: Wed, 3 Dec 2014 00:57:00 +0000 Subject: iio: cm32181: Fix read integration time function In read integration time function, assign 0 to val. Because, prevent return inaccurate value when call read integration time. Cc: Stable@vger.kernel.org Cc: Kevin Tsai Signed-off-by: Beomho Seo Signed-off-by: Jonathan Cameron --- drivers/iio/light/cm32181.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/iio/light/cm32181.c b/drivers/iio/light/cm32181.c index 47a6dbac2d0c..d976e6ce60db 100644 --- a/drivers/iio/light/cm32181.c +++ b/drivers/iio/light/cm32181.c @@ -221,6 +221,7 @@ static int cm32181_read_raw(struct iio_dev *indio_dev, *val = cm32181->calibscale; return IIO_VAL_INT; case IIO_CHAN_INFO_INT_TIME: + *val = 0; ret = cm32181_read_als_it(cm32181, val2); return ret; } -- cgit v1.2.1 From 8f32b6ba56ef8c8434635b9f08ff6a23510960a5 Mon Sep 17 00:00:00 2001 From: Alexandre Belloni Date: Mon, 3 Mar 2014 18:07:00 +0000 Subject: iio: adc: at91_adc: correct default shtim value When sample_hold_time is zero (this is the case when DT is not used or if atmel,adc-sample-hold-time is omitted), then the calculated shtim is large. Make that 0, which is the default for that register and the ADC will then use a sane value of 2/ADCCLK or 1/ADCCLK depending on the version. Signed-off-by: Alexandre Belloni Acked-by: Josh Wu Signed-off-by: Jonathan Cameron --- drivers/iio/adc/at91_adc.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/iio/adc/at91_adc.c b/drivers/iio/adc/at91_adc.c index bbba014c9939..89777ed9abd8 100644 --- a/drivers/iio/adc/at91_adc.c +++ b/drivers/iio/adc/at91_adc.c @@ -1007,8 +1007,11 @@ static int at91_adc_probe(struct platform_device *pdev) * the best converted final value between two channels selection * The formula thus is : Sample and Hold Time = (shtim + 1) / ADCClock */ - shtim = round_up((st->sample_hold_time * adc_clk_khz / - 1000) - 1, 1); + if (st->sample_hold_time > 0) + shtim = round_up((st->sample_hold_time * adc_clk_khz / 1000) + - 1, 1); + else + shtim = 0; reg = AT91_ADC_PRESCAL_(prsc) & st->registers->mr_prescal_mask; reg |= AT91_ADC_STARTUP_(ticks) & st->registers->mr_startup_mask; -- cgit v1.2.1 From 6b9da2e77249bd62bb0902319cfa22398f32c538 Mon Sep 17 00:00:00 2001 From: Jimmy Li Date: Sat, 22 Mar 2014 05:58:00 +0000 Subject: staging:iio:ad2s1200 fix a missing break Signed-off-by: Jimmy Li Signed-off-by: Jonathan Cameron --- drivers/staging/iio/resolver/ad2s1200.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/staging/iio/resolver/ad2s1200.c b/drivers/staging/iio/resolver/ad2s1200.c index 36eedd8a0ea9..e2b482045158 100644 --- a/drivers/staging/iio/resolver/ad2s1200.c +++ b/drivers/staging/iio/resolver/ad2s1200.c @@ -70,6 +70,7 @@ static int ad2s1200_read_raw(struct iio_dev *indio_dev, vel = (((s16)(st->rx[0])) << 4) | ((st->rx[1] & 0xF0) >> 4); vel = (vel << 4) >> 4; *val = vel; + break; default: mutex_unlock(&st->lock); return -EINVAL; -- cgit v1.2.1 From 2076a20fc1a06f7b0333c62a2bb4eeeac7ed1bcb Mon Sep 17 00:00:00 2001 From: Alec Berg Date: Wed, 19 Mar 2014 18:50:00 +0000 Subject: iio: querying buffer scan_mask should return 0/1 Ensure that querying the IIO buffer scan_mask returns a value of 0 or 1. Currently querying the scan mask has the value returned by test_bit(), which returns either true or false. For some architectures test_bit() may return -1 for true, which will appear to return an error when returning from iio_scan_mask_query(). Additionally, it's important for the sysfs interface to consistently return the same thing when querying the scan_mask. Signed-off-by: Alec Berg Cc: stable@vger.kernel.org Signed-off-by: Jonathan Cameron --- drivers/iio/industrialio-buffer.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/iio/industrialio-buffer.c b/drivers/iio/industrialio-buffer.c index c67d83bdc8f0..fe25042f056a 100644 --- a/drivers/iio/industrialio-buffer.c +++ b/drivers/iio/industrialio-buffer.c @@ -165,7 +165,8 @@ static ssize_t iio_scan_el_show(struct device *dev, int ret; struct iio_dev *indio_dev = dev_to_iio_dev(dev); - ret = test_bit(to_iio_dev_attr(attr)->address, + /* Ensure ret is 0 or 1. */ + ret = !!test_bit(to_iio_dev_attr(attr)->address, indio_dev->buffer->scan_mask); return sprintf(buf, "%d\n", ret); @@ -866,7 +867,8 @@ int iio_scan_mask_query(struct iio_dev *indio_dev, if (!buffer->scan_mask) return 0; - return test_bit(bit, buffer->scan_mask); + /* Ensure return value is 0 or 1. */ + return !!test_bit(bit, buffer->scan_mask); }; EXPORT_SYMBOL_GPL(iio_scan_mask_query); -- cgit v1.2.1 From d0a588a57c2b0748df8307a0865a1bbbf1624c53 Mon Sep 17 00:00:00 2001 From: Krzysztof Kozlowski Date: Tue, 18 Mar 2014 08:13:00 +0000 Subject: iio: cm36651: Fix i2c client leak and possible NULL pointer dereference During probe the driver allocates dummy I2C devices (i2c_new_dummy()) but they aren't unregistered during driver remove or probe failure. Additionally driver does not check the return value of i2c_new_dummy(). In case of error (i2c_new_device(): memory allocation failure or I2C address cannot be used) this function returns NULL which is later dereferenced by i2c_smbus_{read,write}_data() functions. Fix issues by properly checking for i2c_new_dummy() return value and unregistering I2C devices on driver remove or probe failure. Signed-off-by: Krzysztof Kozlowski Acked-by: Beomho Seo Cc: stable@vger.kernel.org Signed-off-by: Jonathan Cameron --- drivers/iio/light/cm36651.c | 22 ++++++++++++++++++++-- 1 file changed, 20 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/iio/light/cm36651.c b/drivers/iio/light/cm36651.c index a45e07492db3..39fc67e82138 100644 --- a/drivers/iio/light/cm36651.c +++ b/drivers/iio/light/cm36651.c @@ -652,7 +652,19 @@ static int cm36651_probe(struct i2c_client *client, cm36651->client = client; cm36651->ps_client = i2c_new_dummy(client->adapter, CM36651_I2C_ADDR_PS); + if (!cm36651->ps_client) { + dev_err(&client->dev, "%s: new i2c device failed\n", __func__); + ret = -ENODEV; + goto error_disable_reg; + } + cm36651->ara_client = i2c_new_dummy(client->adapter, CM36651_ARA); + if (!cm36651->ara_client) { + dev_err(&client->dev, "%s: new i2c device failed\n", __func__); + ret = -ENODEV; + goto error_i2c_unregister_ps; + } + mutex_init(&cm36651->lock); indio_dev->dev.parent = &client->dev; indio_dev->channels = cm36651_channels; @@ -664,7 +676,7 @@ static int cm36651_probe(struct i2c_client *client, ret = cm36651_setup_reg(cm36651); if (ret) { dev_err(&client->dev, "%s: register setup failed\n", __func__); - goto error_disable_reg; + goto error_i2c_unregister_ara; } ret = request_threaded_irq(client->irq, NULL, cm36651_irq_handler, @@ -672,7 +684,7 @@ static int cm36651_probe(struct i2c_client *client, "cm36651", indio_dev); if (ret) { dev_err(&client->dev, "%s: request irq failed\n", __func__); - goto error_disable_reg; + goto error_i2c_unregister_ara; } ret = iio_device_register(indio_dev); @@ -685,6 +697,10 @@ static int cm36651_probe(struct i2c_client *client, error_free_irq: free_irq(client->irq, indio_dev); +error_i2c_unregister_ara: + i2c_unregister_device(cm36651->ara_client); +error_i2c_unregister_ps: + i2c_unregister_device(cm36651->ps_client); error_disable_reg: regulator_disable(cm36651->vled_reg); return ret; @@ -698,6 +714,8 @@ static int cm36651_remove(struct i2c_client *client) iio_device_unregister(indio_dev); regulator_disable(cm36651->vled_reg); free_irq(client->irq, indio_dev); + i2c_unregister_device(cm36651->ps_client); + i2c_unregister_device(cm36651->ara_client); return 0; } -- cgit v1.2.1 From e036f71e8ce310dc58b1351c3eb967b892f4641c Mon Sep 17 00:00:00 2001 From: Alexandre Belloni Date: Mon, 17 Mar 2014 16:43:00 +0000 Subject: iio: adc: mxs-lradc: fix warning when buidling on avr32 This fixes: drivers/staging/iio/adc/mxs-lradc.c: In function 'mxs_lradc_probe': drivers/staging/iio/adc/mxs-lradc.c:1558: warning: comparison of distinct pointer types lacks a cast drivers/staging/iio/adc/mxs-lradc.c:1558: warning: right shift count >= width of type drivers/staging/iio/adc/mxs-lradc.c:1558: warning: passing argument 1 of '__div64_32' from incompatible pointer type When building on avr32. Reported-by: Fengguang Wu Signed-off-by: Alexandre Belloni Signed-off-by: Jonathan Cameron --- drivers/staging/iio/adc/mxs-lradc.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/staging/iio/adc/mxs-lradc.c b/drivers/staging/iio/adc/mxs-lradc.c index 514844efac75..53b3f963a7e3 100644 --- a/drivers/staging/iio/adc/mxs-lradc.c +++ b/drivers/staging/iio/adc/mxs-lradc.c @@ -1527,7 +1527,7 @@ static int mxs_lradc_probe(struct platform_device *pdev) struct resource *iores; int ret = 0, touch_ret; int i, s; - unsigned int scale_uv; + uint64_t scale_uv; /* Allocate the IIO device. */ iio = devm_iio_device_alloc(dev, sizeof(*lradc)); -- cgit v1.2.1 From 74c03eb63061c834893e7ebf8d298573bdccfd08 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Wed, 2 Apr 2014 12:41:59 -0400 Subject: libata: make AHCI_XGENE depend on PHY_XGENE AHCI_XGENE is only applicable on ARM64 but it can also be enabled for compile testing; however, AHCI_XGENE selects PHY_XGENE which has other arch specific dependencies. This leads to the following warning when enabling it on other archs for compile testing. warning: (AHCI_XGENE) selects PHY_XGENE which has unmet direct dependencies (HAS_IOMEM && OF && (ARM64 || COMPILE_TEST)) Selecting a config option which itself has dependencies can easily lead to broken configurations. For now, let's just make AHCI_XGENE depend on PHY_XGENE which has all the necessary dependencies already. Signed-off-by: Tejun Heo Reported-by: Linus Torvalds Cc: Loc Ho Cc: Bartlomiej Zolnierkiewicz Cc: Kishon Vijay Abraham I --- drivers/ata/Kconfig | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/ata/Kconfig b/drivers/ata/Kconfig index 20e03a7eb8b4..2e4da3bc47fc 100644 --- a/drivers/ata/Kconfig +++ b/drivers/ata/Kconfig @@ -134,8 +134,7 @@ config AHCI_SUNXI config AHCI_XGENE tristate "APM X-Gene 6.0Gbps AHCI SATA host controller support" - depends on ARM64 || COMPILE_TEST - select PHY_XGENE + depends on PHY_XGENE help This option enables support for APM X-Gene SoC SATA host controller. -- cgit v1.2.1 From d121f7d0cbb875abce249dbf7eb191f9bafe80b7 Mon Sep 17 00:00:00 2001 From: "Martin K. Petersen" Date: Tue, 1 Apr 2014 20:42:37 -0400 Subject: libata: Update queued trim blacklist for M5x0 drives Crucial/Micron M500 drives properly support queued DSM TRIM starting with firmware MU05. Update the blacklist so we only disable queued trim for older firmware releases. Early M550 series drives suffer from the same issue as M500. A bugfix firmware is in the pipeline but not ready yet. Until then, blacklist queued trim for M550. Signed-off-by: Martin K. Petersen Cc: Chris Samuel Cc: Marc MERLIN Signed-off-by: Tejun Heo Cc: stable@vger.kernel.org --- drivers/ata/libata-core.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c index 34406f7fdd7a..f2a6020366e1 100644 --- a/drivers/ata/libata-core.c +++ b/drivers/ata/libata-core.c @@ -4224,8 +4224,10 @@ static const struct ata_blacklist_entry ata_device_blacklist [] = { { "PIONEER DVD-RW DVR-216D", NULL, ATA_HORKAGE_NOSETXFER }, /* devices that don't properly handle queued TRIM commands */ - { "Micron_M500*", NULL, ATA_HORKAGE_NO_NCQ_TRIM, }, - { "Crucial_CT???M500SSD*", NULL, ATA_HORKAGE_NO_NCQ_TRIM, }, + { "Micron_M500*", "MU0[1-4]*", ATA_HORKAGE_NO_NCQ_TRIM, }, + { "Crucial_CT???M500SSD*", "MU0[1-4]*", ATA_HORKAGE_NO_NCQ_TRIM, }, + { "Micron_M550*", NULL, ATA_HORKAGE_NO_NCQ_TRIM, }, + { "Crucial_CT???M550SSD*", NULL, ATA_HORKAGE_NO_NCQ_TRIM, }, /* * Some WD SATA-I drives spin up and down erratically when the link -- cgit v1.2.1 From 27aa64b9d1bd0d23fd692c91763a48309b694311 Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Mon, 31 Mar 2014 19:51:14 +0200 Subject: pata_at91: fix ata_host_activate() failure handling Add missing clk_put() call to ata_host_activate() failure path. Sergei says, "Hm, I have once fixed that (see that *if* (!ret)) but looks like a later commit 477c87e90853d136b188c50c0e4a93d01cad872e (ARM: at91/pata: use gpio_is_valid to check the gpio) broke it again. :-( Would be good if the changelog did mention that..." Cc: Andrew Victor Cc: Nicolas Ferre Cc: Jean-Christophe Plagniol-Villard Cc: Sergei Shtylyov Signed-off-by: Bartlomiej Zolnierkiewicz Signed-off-by: Tejun Heo Cc: stable@vger.kernel.org --- drivers/ata/pata_at91.c | 11 ++++++----- 1 file changed, 6 insertions(+), 5 deletions(-) (limited to 'drivers') diff --git a/drivers/ata/pata_at91.c b/drivers/ata/pata_at91.c index e9c87274a781..8a66f23af4c4 100644 --- a/drivers/ata/pata_at91.c +++ b/drivers/ata/pata_at91.c @@ -407,12 +407,13 @@ static int pata_at91_probe(struct platform_device *pdev) host->private_data = info; - return ata_host_activate(host, gpio_is_valid(irq) ? gpio_to_irq(irq) : 0, - gpio_is_valid(irq) ? ata_sff_interrupt : NULL, - irq_flags, &pata_at91_sht); + ret = ata_host_activate(host, gpio_is_valid(irq) ? gpio_to_irq(irq) : 0, + gpio_is_valid(irq) ? ata_sff_interrupt : NULL, + irq_flags, &pata_at91_sht); + if (ret) + goto err_put; - if (!ret) - return 0; + return 0; err_put: clk_put(info->mck); -- cgit v1.2.1 From f5f85ee065f2e243f4165d7dd7d1a4a95daa1801 Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Tue, 8 Apr 2014 11:06:26 +0200 Subject: ata: fix i.MX AHCI driver dependencies The ahci_imx driver is only needed on Freescale i.MX platforms so don't let it be built on other platforms, except for build test purpose. Signed-off-by: Jean Delvare Cc: Tejun Heo Cc: Richard Zhu Signed-off-by: Tejun Heo --- drivers/ata/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/ata/Kconfig b/drivers/ata/Kconfig index 2e4da3bc47fc..c2706047337f 100644 --- a/drivers/ata/Kconfig +++ b/drivers/ata/Kconfig @@ -116,7 +116,7 @@ config AHCI_ST config AHCI_IMX tristate "Freescale i.MX AHCI SATA support" - depends on MFD_SYSCON + depends on MFD_SYSCON && (ARCH_MXC || COMPILE_TEST) help This option enables support for the Freescale i.MX SoC's onboard AHCI SATA. -- cgit v1.2.1 From 5e3283e2920a0bd8a806964d80274b8756e0dd7f Mon Sep 17 00:00:00 2001 From: Joe Thornber Date: Tue, 8 Apr 2014 11:08:41 +0100 Subject: dm thin: irqsave must always be used with the pool->lock spinlock Commit c140e1c4e23 ("dm thin: use per thin device deferred bio lists") incorrectly stopped disabling irqs when taking the pool's spinlock. Irqs must be disabled when taking the pool's spinlock otherwise a thread could spin_lock(), then get interrupted to service thin_endio() in interrupt context, which would then deadlock in spin_lock_irqsave(). Signed-off-by: Joe Thornber Signed-off-by: Mike Snitzer --- drivers/md/dm-thin.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/md/dm-thin.c b/drivers/md/dm-thin.c index 53728be84dee..ae5fd0b9c75c 100644 --- a/drivers/md/dm-thin.c +++ b/drivers/md/dm-thin.c @@ -3101,6 +3101,7 @@ static int thin_ctr(struct dm_target *ti, unsigned argc, char **argv) struct thin_c *tc; struct dm_dev *pool_dev, *origin_dev; struct mapped_device *pool_md; + unsigned long flags; mutex_lock(&dm_thin_pool_table.mutex); @@ -3191,9 +3192,9 @@ static int thin_ctr(struct dm_target *ti, unsigned argc, char **argv) mutex_unlock(&dm_thin_pool_table.mutex); - spin_lock(&tc->pool->lock); + spin_lock_irqsave(&tc->pool->lock, flags); list_add_tail_rcu(&tc->list, &tc->pool->active_thins); - spin_unlock(&tc->pool->lock); + spin_unlock_irqrestore(&tc->pool->lock, flags); /* * This synchronize_rcu() call is needed here otherwise we risk a * wake_worker() call finding no bios to process (because the newly -- cgit v1.2.1 From b10ebd34cccae1b431caf1be54919aede2be7cbe Mon Sep 17 00:00:00 2001 From: Joe Thornber Date: Tue, 8 Apr 2014 11:29:01 +0100 Subject: dm thin: fix rcu_read_lock being held in code that can sleep Commit c140e1c4e23 ("dm thin: use per thin device deferred bio lists") introduced the use of an rculist for all active thin devices. The use of rcu_read_lock() in process_deferred_bios() can result in a BUG if a dm_bio_prison_cell must be allocated as a side-effect of bio_detain(): BUG: sleeping function called from invalid context at mm/mempool.c:203 in_atomic(): 1, irqs_disabled(): 0, pid: 6, name: kworker/u8:0 3 locks held by kworker/u8:0/6: #0: ("dm-" "thin"){.+.+..}, at: [] process_one_work+0x192/0x550 #1: ((&pool->worker)){+.+...}, at: [] process_one_work+0x192/0x550 #2: (rcu_read_lock){.+.+..}, at: [] do_worker+0x5/0x4d0 We can't process deferred bios with the rcu lock held, since dm_bio_prison_cell allocation may block if the bio-prison's cell mempool is exhausted. To fix: - Introduce a refcount and completion field to each thin_c - Add thin_get/put methods for adjusting the refcount. If the refcount hits zero then the completion is triggered. - Initialise refcount to 1 when creating thin_c - When iterating the active_thins list we thin_get() whilst the rcu lock is held. - After the rcu lock is dropped we process the deferred bios for that thin. - When destroying a thin_c we thin_put() and then wait for the completion -- to avoid a race between the worker thread iterating from that thin_c and destroying the thin_c. Signed-off-by: Joe Thornber Signed-off-by: Mike Snitzer --- drivers/md/dm-thin.c | 70 +++++++++++++++++++++++++++++++++++++++++++++++++--- 1 file changed, 67 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/md/dm-thin.c b/drivers/md/dm-thin.c index ae5fd0b9c75c..28fc282b61b2 100644 --- a/drivers/md/dm-thin.c +++ b/drivers/md/dm-thin.c @@ -232,6 +232,13 @@ struct thin_c { struct bio_list deferred_bio_list; struct bio_list retry_on_resume_list; struct rb_root sort_bio_list; /* sorted list of deferred bios */ + + /* + * Ensures the thin is not destroyed until the worker has finished + * iterating the active_thins list. + */ + atomic_t refcount; + struct completion can_destroy; }; /*----------------------------------------------------------------*/ @@ -1486,6 +1493,45 @@ static void process_thin_deferred_bios(struct thin_c *tc) blk_finish_plug(&plug); } +static void thin_get(struct thin_c *tc); +static void thin_put(struct thin_c *tc); + +/* + * We can't hold rcu_read_lock() around code that can block. So we + * find a thin with the rcu lock held; bump a refcount; then drop + * the lock. + */ +static struct thin_c *get_first_thin(struct pool *pool) +{ + struct thin_c *tc = NULL; + + rcu_read_lock(); + if (!list_empty(&pool->active_thins)) { + tc = list_entry_rcu(pool->active_thins.next, struct thin_c, list); + thin_get(tc); + } + rcu_read_unlock(); + + return tc; +} + +static struct thin_c *get_next_thin(struct pool *pool, struct thin_c *tc) +{ + struct thin_c *old_tc = tc; + + rcu_read_lock(); + list_for_each_entry_continue_rcu(tc, &pool->active_thins, list) { + thin_get(tc); + thin_put(old_tc); + rcu_read_unlock(); + return tc; + } + thin_put(old_tc); + rcu_read_unlock(); + + return NULL; +} + static void process_deferred_bios(struct pool *pool) { unsigned long flags; @@ -1493,10 +1539,11 @@ static void process_deferred_bios(struct pool *pool) struct bio_list bios; struct thin_c *tc; - rcu_read_lock(); - list_for_each_entry_rcu(tc, &pool->active_thins, list) + tc = get_first_thin(pool); + while (tc) { process_thin_deferred_bios(tc); - rcu_read_unlock(); + tc = get_next_thin(pool, tc); + } /* * If there are any deferred flush bios, we must commit @@ -3061,11 +3108,25 @@ static struct target_type pool_target = { /*---------------------------------------------------------------- * Thin target methods *--------------------------------------------------------------*/ +static void thin_get(struct thin_c *tc) +{ + atomic_inc(&tc->refcount); +} + +static void thin_put(struct thin_c *tc) +{ + if (atomic_dec_and_test(&tc->refcount)) + complete(&tc->can_destroy); +} + static void thin_dtr(struct dm_target *ti) { struct thin_c *tc = ti->private; unsigned long flags; + thin_put(tc); + wait_for_completion(&tc->can_destroy); + spin_lock_irqsave(&tc->pool->lock, flags); list_del_rcu(&tc->list); spin_unlock_irqrestore(&tc->pool->lock, flags); @@ -3192,6 +3253,9 @@ static int thin_ctr(struct dm_target *ti, unsigned argc, char **argv) mutex_unlock(&dm_thin_pool_table.mutex); + atomic_set(&tc->refcount, 1); + init_completion(&tc->can_destroy); + spin_lock_irqsave(&tc->pool->lock, flags); list_add_tail_rcu(&tc->list, &tc->pool->active_thins); spin_unlock_irqrestore(&tc->pool->lock, flags); -- cgit v1.2.1 From 151eea367c720db8a0768caf47894c32991aa02a Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Mon, 14 Apr 2014 18:01:47 +0200 Subject: pata_arasan_cf: fix ata_host_activate() failure handling Add missing cf_exit() and clk_put() calls to ata_host_activate() failure path. Cc: Viresh Kumar Cc: Shiraz Hashim Signed-off-by: Bartlomiej Zolnierkiewicz Acked-by: Viresh Kumar Signed-off-by: Tejun Heo --- drivers/ata/pata_arasan_cf.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/ata/pata_arasan_cf.c b/drivers/ata/pata_arasan_cf.c index 6fac524c2f50..4edb1a81f63f 100644 --- a/drivers/ata/pata_arasan_cf.c +++ b/drivers/ata/pata_arasan_cf.c @@ -898,9 +898,12 @@ static int arasan_cf_probe(struct platform_device *pdev) cf_card_detect(acdev, 0); - return ata_host_activate(host, acdev->irq, irq_handler, 0, - &arasan_cf_sht); + ret = ata_host_activate(host, acdev->irq, irq_handler, 0, + &arasan_cf_sht); + if (!ret) + return 0; + cf_exit(acdev); free_clk: clk_put(acdev->clk); return ret; -- cgit v1.2.1 From e8304d04ac88c21b2a68d189f01678d71479a803 Mon Sep 17 00:00:00 2001 From: Steven Miao Date: Sat, 12 Apr 2014 09:23:24 +0800 Subject: spi: bfin5xx: fix build error should include linux/gpio.h Signed-off-by: Steven Miao Signed-off-by: Mark Brown --- drivers/spi/spi-bfin5xx.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/spi/spi-bfin5xx.c b/drivers/spi/spi-bfin5xx.c index 55e57c3eb9bd..ebf720b88a2a 100644 --- a/drivers/spi/spi-bfin5xx.c +++ b/drivers/spi/spi-bfin5xx.c @@ -12,6 +12,7 @@ #include #include #include +#include #include #include #include -- cgit v1.2.1 From 818e91625aa17161cd6b39a4d08b77c984f0f485 Mon Sep 17 00:00:00 2001 From: Qipan Li Date: Mon, 14 Apr 2014 14:29:57 +0800 Subject: spi: sirf: correct TXFIFO empty interrupt status bit the old code uses wrong marco - SIRFSOC_SPI_FIFO_FULL is not for FIFO interrupt status, it is for FIFO status. here in the ISR, SIRFSOC_SPI_TXFIFO_EMPTY is the right bit for SPI TXFIFO interrupt status. Signed-off-by: Qipan Li Signed-off-by: Barry Song Signed-off-by: Mark Brown --- drivers/spi/spi-sirf.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/spi/spi-sirf.c b/drivers/spi/spi-sirf.c index 1a77ad52812f..51d7c988d3ae 100644 --- a/drivers/spi/spi-sirf.c +++ b/drivers/spi/spi-sirf.c @@ -287,8 +287,8 @@ static irqreturn_t spi_sirfsoc_irq(int irq, void *dev_id) sspi->left_rx_word) sspi->rx_word(sspi); - if (spi_stat & (SIRFSOC_SPI_FIFO_EMPTY - | SIRFSOC_SPI_TXFIFO_THD_REACH)) + if (spi_stat & (SIRFSOC_SPI_TXFIFO_EMPTY | + SIRFSOC_SPI_TXFIFO_THD_REACH)) while (!((readl(sspi->base + SIRFSOC_SPI_TXFIFO_STATUS) & SIRFSOC_SPI_FIFO_FULL)) && sspi->left_tx_word) -- cgit v1.2.1 From 625227a4e916fa87f1dd84bde518ef403c3f708a Mon Sep 17 00:00:00 2001 From: Qipan Li Date: Mon, 14 Apr 2014 14:29:58 +0800 Subject: spi: sirf: set SPI controller in RISC IO chipselect mode SPI bitbang supply "chipselect" interface for change chip-select line , in the SiRFSoC SPI controller, we need to enable "SPI_CS_IO_MODE", otherwise, spi_sirfsoc_chipselect() has no effect. now the driver is working is because SPI controller will control CS automatically without SPI_CS_IO_MODE. this patch makes the CS controller really controlled by software. Signed-off-by: Qipan Li Signed-off-by: Barry Song Signed-off-by: Mark Brown --- drivers/spi/spi-sirf.c | 5 +++++ 1 file changed, 5 insertions(+) (limited to 'drivers') diff --git a/drivers/spi/spi-sirf.c b/drivers/spi/spi-sirf.c index 51d7c988d3ae..9b30743d816a 100644 --- a/drivers/spi/spi-sirf.c +++ b/drivers/spi/spi-sirf.c @@ -559,6 +559,11 @@ spi_sirfsoc_setup_transfer(struct spi_device *spi, struct spi_transfer *t) regval &= ~SIRFSOC_SPI_CMD_MODE; sspi->tx_by_cmd = false; } + /* + * set spi controller in RISC chipselect mode, we are controlling CS by + * software BITBANG_CS_ACTIVE and BITBANG_CS_INACTIVE. + */ + regval |= SIRFSOC_SPI_CS_IO_MODE; writel(regval, sspi->base + SIRFSOC_SPI_CTRL); if (IS_DMA_VALID(t)) { -- cgit v1.2.1 From 6ee8a2f7d5e78700b6e64799b5e9976b21cfad79 Mon Sep 17 00:00:00 2001 From: Qipan Li Date: Mon, 14 Apr 2014 14:29:59 +0800 Subject: spi: sirf: make GPIO chipselect function work well orignal GPIO chipslect is not standard because it don't take care to the chipselect signal: BITBANG_CS_ACTIVE and BITBANG_CS_INACTIVE. Signed-off-by: Qipan Li Signed-off-by: Barry Song Signed-off-by: Mark Brown --- drivers/spi/spi-sirf.c | 11 ++++++++++- 1 file changed, 10 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/spi/spi-sirf.c b/drivers/spi/spi-sirf.c index 9b30743d816a..67d8909dcf39 100644 --- a/drivers/spi/spi-sirf.c +++ b/drivers/spi/spi-sirf.c @@ -470,7 +470,16 @@ static void spi_sirfsoc_chipselect(struct spi_device *spi, int value) writel(regval, sspi->base + SIRFSOC_SPI_CTRL); } else { int gpio = sspi->chipselect[spi->chip_select]; - gpio_direction_output(gpio, spi->mode & SPI_CS_HIGH ? 0 : 1); + switch (value) { + case BITBANG_CS_ACTIVE: + gpio_direction_output(gpio, + spi->mode & SPI_CS_HIGH ? 1 : 0); + break; + case BITBANG_CS_INACTIVE: + gpio_direction_output(gpio, + spi->mode & SPI_CS_HIGH ? 0 : 1); + break; + } } } -- cgit v1.2.1 From 4a4dd7d80e11f62cacf49bd90d9448a218188af7 Mon Sep 17 00:00:00 2001 From: Simon Horman Date: Mon, 14 Apr 2014 10:41:38 +0900 Subject: spi: sh-hspi: Do not specifically request shyway_clk clock Rather than requesting the shyway_clk call clk_get with the device and a NULL con_id. This is in keeping with the way that clk_get() is called on other drivers used by Renesas Gen 1 SoCs. And I believe it is compatible with supplying clocks via DT, unlike the current code. It appears to me that the two uses of this driver are the r8a7778 and r8a7779 SoCs. The r8a7779 already has clocks setup to allow this driver to continue to work with this change applied. The r8a7778 has clocks incorrectly setup to allow this driver to continue to work with this change applied. This problem is addressed in "ARM: shmobile: r8a7778: Use clks as MSTP007 parent" which is thus a pre-requisite of this patch. Signed-off-by: Simon Horman Signed-off-by: Mark Brown --- drivers/spi/spi-sh-hspi.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/spi/spi-sh-hspi.c b/drivers/spi/spi-sh-hspi.c index 9009456bdf4d..c8e795ef2e13 100644 --- a/drivers/spi/spi-sh-hspi.c +++ b/drivers/spi/spi-sh-hspi.c @@ -244,9 +244,9 @@ static int hspi_probe(struct platform_device *pdev) return -ENOMEM; } - clk = clk_get(NULL, "shyway_clk"); + clk = clk_get(&pdev->dev, NULL); if (IS_ERR(clk)) { - dev_err(&pdev->dev, "shyway_clk is required\n"); + dev_err(&pdev->dev, "couldn't get clock\n"); ret = -EINVAL; goto error0; } -- cgit v1.2.1 From 1cb7b43f6796ad0bc62669fa52d1005916911d27 Mon Sep 17 00:00:00 2001 From: Axel Lin Date: Sat, 8 Mar 2014 11:55:29 +0800 Subject: regulator: pbias: Fix is_enabled callback implementation The is_enabled implementation is wrong in some cases: e.g. for pbias_mmc_omap5: enable_mask is : BIT(27) | BIT(25) | BIT(26) However, pbias_regulator_enable() only sets BIT(27) | BIT(26) bits. So is_enabled callback will always return false in this case. Fix the logic to compare the register value with info->enable rather than info->enable_mask. Signed-off-by: Axel Lin Acked-by: Balaji T K Signed-off-by: Mark Brown --- drivers/regulator/pbias-regulator.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/regulator/pbias-regulator.c b/drivers/regulator/pbias-regulator.c index ded3b3574209..d89a1d8615c7 100644 --- a/drivers/regulator/pbias-regulator.c +++ b/drivers/regulator/pbias-regulator.c @@ -108,7 +108,7 @@ static int pbias_regulator_is_enable(struct regulator_dev *rdev) regmap_read(data->syscon, data->pbias_reg, &value); - return (value & info->enable_mask) == info->enable_mask; + return (value & info->enable_mask) == info->enable; } static struct regulator_ops pbias_regulator_voltage_ops = { -- cgit v1.2.1 From 60e8c1e34d3ab74556fb9b25f26fa34b9879ee30 Mon Sep 17 00:00:00 2001 From: Axel Lin Date: Sat, 8 Mar 2014 11:56:47 +0800 Subject: regulator: pbias: Convert to use regmap helper functions This patch converts this driver to use the regmap helper functions provided by regulator core. Signed-off-by: Axel Lin Acked-by: Balaji T K Signed-off-by: Mark Brown --- drivers/regulator/pbias-regulator.c | 74 ++++++++++--------------------------- 1 file changed, 19 insertions(+), 55 deletions(-) (limited to 'drivers') diff --git a/drivers/regulator/pbias-regulator.c b/drivers/regulator/pbias-regulator.c index d89a1d8615c7..6d38be3d970c 100644 --- a/drivers/regulator/pbias-regulator.c +++ b/drivers/regulator/pbias-regulator.c @@ -38,66 +38,24 @@ struct pbias_reg_info { struct pbias_regulator_data { struct regulator_desc desc; void __iomem *pbias_addr; - unsigned int pbias_reg; struct regulator_dev *dev; struct regmap *syscon; const struct pbias_reg_info *info; int voltage; }; -static int pbias_regulator_set_voltage(struct regulator_dev *dev, - int min_uV, int max_uV, unsigned *selector) -{ - struct pbias_regulator_data *data = rdev_get_drvdata(dev); - const struct pbias_reg_info *info = data->info; - int ret, vmode; - - if (min_uV <= 1800000) - vmode = 0; - else if (min_uV > 1800000) - vmode = info->vmode; - - ret = regmap_update_bits(data->syscon, data->pbias_reg, - info->vmode, vmode); - - return ret; -} - -static int pbias_regulator_get_voltage(struct regulator_dev *rdev) -{ - struct pbias_regulator_data *data = rdev_get_drvdata(rdev); - const struct pbias_reg_info *info = data->info; - int value, voltage; - - regmap_read(data->syscon, data->pbias_reg, &value); - value &= info->vmode; - - voltage = value ? 3000000 : 1800000; - - return voltage; -} +static const unsigned int pbias_volt_table[] = { + 1800000, + 3000000 +}; static int pbias_regulator_enable(struct regulator_dev *rdev) { struct pbias_regulator_data *data = rdev_get_drvdata(rdev); const struct pbias_reg_info *info = data->info; - int ret; - - ret = regmap_update_bits(data->syscon, data->pbias_reg, - info->enable_mask, info->enable); - - return ret; -} - -static int pbias_regulator_disable(struct regulator_dev *rdev) -{ - struct pbias_regulator_data *data = rdev_get_drvdata(rdev); - const struct pbias_reg_info *info = data->info; - int ret; - ret = regmap_update_bits(data->syscon, data->pbias_reg, - info->enable_mask, 0); - return ret; + return regmap_update_bits(data->syscon, rdev->desc->enable_reg, + info->enable_mask, info->enable); } static int pbias_regulator_is_enable(struct regulator_dev *rdev) @@ -106,17 +64,18 @@ static int pbias_regulator_is_enable(struct regulator_dev *rdev) const struct pbias_reg_info *info = data->info; int value; - regmap_read(data->syscon, data->pbias_reg, &value); + regmap_read(data->syscon, rdev->desc->enable_reg, &value); return (value & info->enable_mask) == info->enable; } static struct regulator_ops pbias_regulator_voltage_ops = { - .set_voltage = pbias_regulator_set_voltage, - .get_voltage = pbias_regulator_get_voltage, - .enable = pbias_regulator_enable, - .disable = pbias_regulator_disable, - .is_enabled = pbias_regulator_is_enable, + .list_voltage = regulator_list_voltage_table, + .get_voltage_sel = regulator_get_voltage_sel_regmap, + .set_voltage_sel = regulator_set_voltage_sel_regmap, + .enable = pbias_regulator_enable, + .disable = regulator_disable_regmap, + .is_enabled = pbias_regulator_is_enable, }; static const struct pbias_reg_info pbias_mmc_omap2430 = { @@ -192,6 +151,7 @@ static int pbias_regulator_probe(struct platform_device *pdev) if (IS_ERR(syscon)) return PTR_ERR(syscon); + cfg.regmap = syscon; cfg.dev = &pdev->dev; for (idx = 0; idx < PBIAS_NUM_REGS && data_idx < count; idx++) { @@ -207,15 +167,19 @@ static int pbias_regulator_probe(struct platform_device *pdev) if (!res) return -EINVAL; - drvdata[data_idx].pbias_reg = res->start; drvdata[data_idx].syscon = syscon; drvdata[data_idx].info = info; drvdata[data_idx].desc.name = info->name; drvdata[data_idx].desc.owner = THIS_MODULE; drvdata[data_idx].desc.type = REGULATOR_VOLTAGE; drvdata[data_idx].desc.ops = &pbias_regulator_voltage_ops; + drvdata[data_idx].desc.volt_table = pbias_volt_table; drvdata[data_idx].desc.n_voltages = 2; drvdata[data_idx].desc.enable_time = info->enable_time; + drvdata[data_idx].desc.vsel_reg = res->start; + drvdata[data_idx].desc.vsel_mask = info->vmode; + drvdata[data_idx].desc.enable_reg = res->start; + drvdata[data_idx].desc.enable_mask = info->enable_mask; cfg.init_data = pbias_matches[idx].init_data; cfg.driver_data = &drvdata[data_idx]; -- cgit v1.2.1 From 1fd10f98d9abcde090b77cfa82c3f32f159e2d94 Mon Sep 17 00:00:00 2001 From: Antti Palosaari Date: Wed, 9 Apr 2014 12:42:35 -0300 Subject: [media] rtl28xxu: do not hard depend on staging SDR module RTL2832 SDR extension module is currently on staging. SDR module headers were included from staging causing direct dependency staging directory. As a solution, add needed headers to main driver. Motivation of that change comes from Luis / driver backports project. Reported-by: Luis R. Rodriguez Cc: backports@vger.kernel.org Signed-off-by: Antti Palosaari Signed-off-by: Mauro Carvalho Chehab --- drivers/media/usb/dvb-usb-v2/Makefile | 1 - drivers/media/usb/dvb-usb-v2/rtl28xxu.c | 21 ++++++++++++++++++++- 2 files changed, 20 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/media/usb/dvb-usb-v2/Makefile b/drivers/media/usb/dvb-usb-v2/Makefile index 7407b8338ccf..bc38f03394cd 100644 --- a/drivers/media/usb/dvb-usb-v2/Makefile +++ b/drivers/media/usb/dvb-usb-v2/Makefile @@ -41,4 +41,3 @@ ccflags-y += -I$(srctree)/drivers/media/dvb-core ccflags-y += -I$(srctree)/drivers/media/dvb-frontends ccflags-y += -I$(srctree)/drivers/media/tuners ccflags-y += -I$(srctree)/drivers/media/common -ccflags-y += -I$(srctree)/drivers/staging/media/rtl2832u_sdr diff --git a/drivers/media/usb/dvb-usb-v2/rtl28xxu.c b/drivers/media/usb/dvb-usb-v2/rtl28xxu.c index 61d196e8b3ab..3a7a5a7f95a7 100644 --- a/drivers/media/usb/dvb-usb-v2/rtl28xxu.c +++ b/drivers/media/usb/dvb-usb-v2/rtl28xxu.c @@ -24,7 +24,6 @@ #include "rtl2830.h" #include "rtl2832.h" -#include "rtl2832_sdr.h" #include "qt1010.h" #include "mt2060.h" @@ -36,6 +35,26 @@ #include "tua9001.h" #include "r820t.h" +/* + * RTL2832_SDR module is in staging. That logic is added in order to avoid any + * hard dependency to drivers/staging/ directory as we want compile mainline + * driver even whole staging directory is missing. + */ +#include + +#if IS_ENABLED(CONFIG_DVB_RTL2832_SDR) +struct dvb_frontend *rtl2832_sdr_attach(struct dvb_frontend *fe, + struct i2c_adapter *i2c, const struct rtl2832_config *cfg, + struct v4l2_subdev *sd); +#else +static inline struct dvb_frontend *rtl2832_sdr_attach(struct dvb_frontend *fe, + struct i2c_adapter *i2c, const struct rtl2832_config *cfg, + struct v4l2_subdev *sd) +{ + return NULL; +} +#endif + static int rtl28xxu_disable_rc; module_param_named(disable_rc, rtl28xxu_disable_rc, int, 0644); MODULE_PARM_DESC(disable_rc, "disable RTL2832U remote controller"); -- cgit v1.2.1 From 3608aeff47034faee7518ddec52d77fb811e952c Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Mon, 31 Mar 2014 19:52:44 +0200 Subject: pata_samsung_cf: fix ata_host_activate() failure handling Add missing clk_disable() call to ata_host_activate() failure path. Cc: Ben Dooks Cc: Kukjin Kim Signed-off-by: Bartlomiej Zolnierkiewicz Reviewed-by: Jingoo Han Signed-off-by: Tejun Heo --- drivers/ata/pata_samsung_cf.c | 10 +++++++--- 1 file changed, 7 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/ata/pata_samsung_cf.c b/drivers/ata/pata_samsung_cf.c index a79566d05666..0610e78c8a2a 100644 --- a/drivers/ata/pata_samsung_cf.c +++ b/drivers/ata/pata_samsung_cf.c @@ -594,9 +594,13 @@ static int __init pata_s3c_probe(struct platform_device *pdev) platform_set_drvdata(pdev, host); - return ata_host_activate(host, info->irq, - info->irq ? pata_s3c_irq : NULL, - 0, &pata_s3c_sht); + ret = ata_host_activate(host, info->irq, + info->irq ? pata_s3c_irq : NULL, + 0, &pata_s3c_sht); + if (ret) + goto stop_clk; + + return 0; stop_clk: clk_disable(info->clk); -- cgit v1.2.1 From beab1b530efa46164fbec3dc9b779cc7739b4f2c Mon Sep 17 00:00:00 2001 From: Antti Palosaari Date: Wed, 9 Apr 2014 18:08:37 -0300 Subject: [media] rtl28xxu: silence error log about disabled rtl2832_sdr module It printed a little bit too heavy looking error log "DVB: Unable to find symbol rtl2832_sdr_attach()" when staging module was disabled. Silence that error by introducing own version of dvb_attach() macro without the error logging. Signed-off-by: Antti Palosaari Signed-off-by: Mauro Carvalho Chehab --- drivers/media/usb/dvb-usb-v2/rtl28xxu.c | 27 +++++++++++++++++++++++---- 1 file changed, 23 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/media/usb/dvb-usb-v2/rtl28xxu.c b/drivers/media/usb/dvb-usb-v2/rtl28xxu.c index 3a7a5a7f95a7..dcbd392e6efc 100644 --- a/drivers/media/usb/dvb-usb-v2/rtl28xxu.c +++ b/drivers/media/usb/dvb-usb-v2/rtl28xxu.c @@ -55,6 +55,25 @@ static inline struct dvb_frontend *rtl2832_sdr_attach(struct dvb_frontend *fe, } #endif +#ifdef CONFIG_MEDIA_ATTACH +#define dvb_attach_sdr(FUNCTION, ARGS...) ({ \ + void *__r = NULL; \ + typeof(&FUNCTION) __a = symbol_request(FUNCTION); \ + if (__a) { \ + __r = (void *) __a(ARGS); \ + if (__r == NULL) \ + symbol_put(FUNCTION); \ + } \ + __r; \ +}) + +#else +#define dvb_attach_sdr(FUNCTION, ARGS...) ({ \ + FUNCTION(ARGS); \ +}) + +#endif + static int rtl28xxu_disable_rc; module_param_named(disable_rc, rtl28xxu_disable_rc, int, 0644); MODULE_PARM_DESC(disable_rc, "disable RTL2832U remote controller"); @@ -927,7 +946,7 @@ static int rtl2832u_tuner_attach(struct dvb_usb_adapter *adap) adap->fe[0]->ops.tuner_ops.get_rf_strength; /* attach SDR */ - dvb_attach(rtl2832_sdr_attach, adap->fe[0], &d->i2c_adap, + dvb_attach_sdr(rtl2832_sdr_attach, adap->fe[0], &d->i2c_adap, &rtl28xxu_rtl2832_fc0012_config, NULL); break; case TUNER_RTL2832_FC0013: @@ -939,7 +958,7 @@ static int rtl2832u_tuner_attach(struct dvb_usb_adapter *adap) adap->fe[0]->ops.tuner_ops.get_rf_strength; /* attach SDR */ - dvb_attach(rtl2832_sdr_attach, adap->fe[0], &d->i2c_adap, + dvb_attach_sdr(rtl2832_sdr_attach, adap->fe[0], &d->i2c_adap, &rtl28xxu_rtl2832_fc0013_config, NULL); break; case TUNER_RTL2832_E4000: { @@ -970,7 +989,7 @@ static int rtl2832u_tuner_attach(struct dvb_usb_adapter *adap) i2c_set_adapdata(i2c_adap_internal, d); /* attach SDR */ - dvb_attach(rtl2832_sdr_attach, adap->fe[0], + dvb_attach_sdr(rtl2832_sdr_attach, adap->fe[0], i2c_adap_internal, &rtl28xxu_rtl2832_e4000_config, sd); } @@ -1001,7 +1020,7 @@ static int rtl2832u_tuner_attach(struct dvb_usb_adapter *adap) adap->fe[0]->ops.tuner_ops.get_rf_strength; /* attach SDR */ - dvb_attach(rtl2832_sdr_attach, adap->fe[0], &d->i2c_adap, + dvb_attach_sdr(rtl2832_sdr_attach, adap->fe[0], &d->i2c_adap, &rtl28xxu_rtl2832_r820t_config, NULL); break; case TUNER_RTL2832_R828D: -- cgit v1.2.1 From 41f484d12c0105ce01ea79acdc094fff9124491b Mon Sep 17 00:00:00 2001 From: Sylwester Nawrocki Date: Tue, 8 Apr 2014 10:05:03 -0300 Subject: [media] s5c73m3: Add missing rename of v4l2_of_get_next_endpoint() function MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit This fixes following build error: CC drivers/media/i2c/s5c73m3/s5c73m3-core.o CC drivers/md/dm-ioctl.o CC net/ipv4/inet_lro.o drivers/media/i2c/s5c73m3/s5c73m3-core.c: In function ‘s5c73m3_get_platform_data’: drivers/media/i2c/s5c73m3/s5c73m3-core.c:1619:2: error: implicit declaration of function ‘v4l2_of_get_next_endpoint’ [-Werror=implicit-function-declaration] drivers/media/i2c/s5c73m3/s5c73m3-core.c:1619:10: warning: assignment makes pointer from integer without a cast [enabled by default] Signed-off-by: Sylwester Nawrocki Signed-off-by: Mauro Carvalho Chehab --- drivers/media/i2c/s5c73m3/s5c73m3-core.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/media/i2c/s5c73m3/s5c73m3-core.c b/drivers/media/i2c/s5c73m3/s5c73m3-core.c index a4459301b5f8..ee0f57e01b56 100644 --- a/drivers/media/i2c/s5c73m3/s5c73m3-core.c +++ b/drivers/media/i2c/s5c73m3/s5c73m3-core.c @@ -1616,7 +1616,7 @@ static int s5c73m3_get_platform_data(struct s5c73m3 *state) if (ret < 0) return -EINVAL; - node_ep = v4l2_of_get_next_endpoint(node, NULL); + node_ep = of_graph_get_next_endpoint(node, NULL); if (!node_ep) { dev_warn(dev, "no endpoint defined for node: %s\n", node->full_name); -- cgit v1.2.1 From e3fadbdf1cbac7164aaefae5fb331cba86255c46 Mon Sep 17 00:00:00 2001 From: Nicolas Dufresne Date: Tue, 25 Mar 2014 17:50:11 -0300 Subject: [media] s5p-fimc: Fix YUV422P depth All YUV 422 has 16bit per pixels. Signed-off-by: Nicolas Dufresne Signed-off-by: Mauro Carvalho Chehab --- drivers/media/platform/exynos4-is/fimc-core.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/media/platform/exynos4-is/fimc-core.c b/drivers/media/platform/exynos4-is/fimc-core.c index da2fc86cc524..25dbf5b05a96 100644 --- a/drivers/media/platform/exynos4-is/fimc-core.c +++ b/drivers/media/platform/exynos4-is/fimc-core.c @@ -122,7 +122,7 @@ static struct fimc_fmt fimc_formats[] = { }, { .name = "YUV 4:2:2 planar, Y/Cb/Cr", .fourcc = V4L2_PIX_FMT_YUV422P, - .depth = { 12 }, + .depth = { 16 }, .color = FIMC_FMT_YCBYCR422, .memplanes = 1, .colplanes = 3, -- cgit v1.2.1 From e6ba3db1049548df10f90234328441b2873a4bd3 Mon Sep 17 00:00:00 2001 From: "Lad, Prabhakar" Date: Sat, 22 Mar 2014 08:03:07 -0300 Subject: [media] media: davinci: vpif_capture: fix releasing of active buffers from commit-id: b3379c6201bb3555298cdbf0aa004af260f2a6a4 "vb2: only call start_streaming if sufficient buffers are queued" the vb2 framework warns on (WARN_ON()) if all the active buffers are not released when streaming is stopped, initially the vb2 silently released the buffer internally if the buffer was not released by the driver. Also this patch moves the disabling of interrupts from relase() callback to stop_streaming() callback as which needs to be done ideally. This patch fixes following issue: WARNING: CPU: 0 PID: 2049 at drivers/media/v4l2-core/videobuf2-core.c:2011 __vb2_queue_cancel+0x1a0/0x218() Modules linked in: CPU: 0 PID: 2049 Comm: vpif_capture Tainted: G W 3.14.0-rc5-00414-ged97a6f #89 [] (unwind_backtrace) from [] (show_stack+0x10/0x14) [] (show_stack) from [] (warn_slowpath_common+0x68/0x88) [] (warn_slowpath_common) from [] (warn_slowpath_null+0x1c/0x24) [] (warn_slowpath_null) from [] (__vb2_queue_cancel+0x1a0/0x218) [] (__vb2_queue_cancel) from [] (vb2_queue_release+0x14/0x24) [] (vb2_queue_release) from [] (vpif_release+0x60/0x230) [] (vpif_release) from [] (v4l2_release+0x34/0x74) [] (v4l2_release) from [] (__fput+0x80/0x224) [] (__fput) from [] (task_work_run+0xa0/0xd0) [] (task_work_run) from [] (do_exit+0x244/0x918) [] (do_exit) from [] (do_group_exit+0x48/0xdc) [] (do_group_exit) from [] (get_signal_to_deliver+0x2a0/0x5bc) [] (get_signal_to_deliver) from [] (do_signal+0x78/0x3a0) [] (do_signal) from [] (do_work_pending+0xa4/0xb4) [] (do_work_pending) from [] (work_pending+0xc/0x20) ---[ end trace 5faa75e8c2f8a6a1 ]--- ------------[ cut here ]------------ WARNING: CPU: 0 PID: 2049 at drivers/media/v4l2-core/videobuf2-core.c:1095 vb2_buffer_done+0x1e0/0x224() Modules linked in: CPU: 0 PID: 2049 Comm: vpif_capture Tainted: G W 3.14.0-rc5-00414-ged97a6f #89 [] (unwind_backtrace) from [] (show_stack+0x10/0x14) [] (show_stack) from [] (warn_slowpath_common+0x68/0x88) [] (warn_slowpath_common) from [] (warn_slowpath_null+0x1c/0x24) [] (warn_slowpath_null) from [] (vb2_buffer_done+0x1e0/0x224) [] (vb2_buffer_done) from [] (__vb2_queue_cancel+0x1d0/0x218) [] (__vb2_queue_cancel) from [] (vb2_queue_release+0x14/0x24) [] (vb2_queue_release) from [] (vpif_release+0x60/0x230) [] (vpif_release) from [] (v4l2_release+0x34/0x74) [] (v4l2_release) from [] (__fput+0x80/0x224) [] (__fput) from [] (task_work_run+0xa0/0xd0) [] (task_work_run) from [] (do_exit+0x244/0x918) [] (do_exit) from [] (do_group_exit+0x48/0xdc) [] (do_group_exit) from [] (get_signal_to_deliver+0x2a0/0x5bc) [] (get_signal_to_deliver) from [] (do_signal+0x78/0x3a0) [] (do_signal) from [] (do_work_pending+0xa4/0xb4) [] (do_work_pending) from [] (work_pending+0xc/0x20) ---[ end trace 5faa75e8c2f8a6a2 ]--- Signed-off-by: Lad, Prabhakar Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab --- drivers/media/platform/davinci/vpif_capture.c | 34 ++++++++++++++++++--------- 1 file changed, 23 insertions(+), 11 deletions(-) (limited to 'drivers') diff --git a/drivers/media/platform/davinci/vpif_capture.c b/drivers/media/platform/davinci/vpif_capture.c index 756da78bac23..8dea0b84a3ad 100644 --- a/drivers/media/platform/davinci/vpif_capture.c +++ b/drivers/media/platform/davinci/vpif_capture.c @@ -358,8 +358,31 @@ static int vpif_stop_streaming(struct vb2_queue *vq) common = &ch->common[VPIF_VIDEO_INDEX]; + /* Disable channel as per its device type and channel id */ + if (VPIF_CHANNEL0_VIDEO == ch->channel_id) { + enable_channel0(0); + channel0_intr_enable(0); + } + if ((VPIF_CHANNEL1_VIDEO == ch->channel_id) || + (2 == common->started)) { + enable_channel1(0); + channel1_intr_enable(0); + } + common->started = 0; + /* release all active buffers */ spin_lock_irqsave(&common->irqlock, flags); + if (common->cur_frm == common->next_frm) { + vb2_buffer_done(&common->cur_frm->vb, VB2_BUF_STATE_ERROR); + } else { + if (common->cur_frm != NULL) + vb2_buffer_done(&common->cur_frm->vb, + VB2_BUF_STATE_ERROR); + if (common->next_frm != NULL) + vb2_buffer_done(&common->next_frm->vb, + VB2_BUF_STATE_ERROR); + } + while (!list_empty(&common->dma_queue)) { common->next_frm = list_entry(common->dma_queue.next, struct vpif_cap_buffer, list); @@ -933,17 +956,6 @@ static int vpif_release(struct file *filep) if (fh->io_allowed[VPIF_VIDEO_INDEX]) { /* Reset io_usrs member of channel object */ common->io_usrs = 0; - /* Disable channel as per its device type and channel id */ - if (VPIF_CHANNEL0_VIDEO == ch->channel_id) { - enable_channel0(0); - channel0_intr_enable(0); - } - if ((VPIF_CHANNEL1_VIDEO == ch->channel_id) || - (2 == common->started)) { - enable_channel1(0); - channel1_intr_enable(0); - } - common->started = 0; /* Free buffers allocated */ vb2_queue_release(&common->buffer_queue); vb2_dma_contig_cleanup_ctx(common->alloc_ctx); -- cgit v1.2.1 From 18c7adcf2c1abf7f554a52f57bee126995791748 Mon Sep 17 00:00:00 2001 From: "Lad, Prabhakar" Date: Sat, 22 Mar 2014 08:03:08 -0300 Subject: [media] media: davinci: vpif_display: fix releasing of active buffers from commit-id: b3379c6201bb3555298cdbf0aa004af260f2a6a4 "vb2: only call start_streaming if sufficient buffers are queued" the vb2 framework warns on (WARN_ON()) if all the active buffers are not released when streaming is stopped, initially the vb2 silently released the buffer internally if the buffer was not released by the driver. Also this patch moves the disabling of interrupts from relase() callback to stop_streaming() callback as which needs to be done ideally. This patch fixes following issue: WARNING: CPU: 0 PID: 2049 at drivers/media/v4l2-core/videobuf2-core.c:2011 __vb2_queue_cancel+0x1a0/0x218() Modules linked in: CPU: 0 PID: 2049 Comm: vpif_display Tainted: G W 3.14.0-rc5-00414-ged97a6f #89 [] (unwind_backtrace) from [] (show_stack+0x10/0x14) [] (show_stack) from [] (warn_slowpath_common+0x68/0x88) [] (warn_slowpath_common) from [] (warn_slowpath_null+0x1c/0x24) [] (warn_slowpath_null) from [] (__vb2_queue_cancel+0x1a0/0x218) [] (__vb2_queue_cancel) from [] (vb2_queue_release+0x14/0x24) [] (vb2_queue_release) from [] (vpif_release+0x60/0x230) [] (vpif_release) from [] (v4l2_release+0x34/0x74) [] (v4l2_release) from [] (__fput+0x80/0x224) [] (__fput) from [] (task_work_run+0xa0/0xd0) [] (task_work_run) from [] (do_exit+0x244/0x918) [] (do_exit) from [] (do_group_exit+0x48/0xdc) [] (do_group_exit) from [] (get_signal_to_deliver+0x2a0/0x5bc) [] (get_signal_to_deliver) from [] (do_signal+0x78/0x3a0) [] (do_signal) from [] (do_work_pending+0xa4/0xb4) [] (do_work_pending) from [] (work_pending+0xc/0x20) ---[ end trace 5faa75e8c2f8a6a1 ]--- ------------[ cut here ]------------ WARNING: CPU: 0 PID: 2049 at drivers/media/v4l2-core/videobuf2-core.c:1095 vb2_buffer_done+0x1e0/0x224() Modules linked in: CPU: 0 PID: 2049 Comm: vpif_display Tainted: G W 3.14.0-rc5-00414-ged97a6f #89 [] (unwind_backtrace) from [] (show_stack+0x10/0x14) [] (show_stack) from [] (warn_slowpath_common+0x68/0x88) [] (warn_slowpath_common) from [] (warn_slowpath_null+0x1c/0x24) [] (warn_slowpath_null) from [] (vb2_buffer_done+0x1e0/0x224) [] (vb2_buffer_done) from [] (__vb2_queue_cancel+0x1d0/0x218) [] (__vb2_queue_cancel) from [] (vb2_queue_release+0x14/0x24) [] (vb2_queue_release) from [] (vpif_release+0x60/0x230) [] (vpif_release) from [] (v4l2_release+0x34/0x74) [] (v4l2_release) from [] (__fput+0x80/0x224) [] (__fput) from [] (task_work_run+0xa0/0xd0) [] (task_work_run) from [] (do_exit+0x244/0x918) [] (do_exit) from [] (do_group_exit+0x48/0xdc) [] (do_group_exit) from [] (get_signal_to_deliver+0x2a0/0x5bc) [] (get_signal_to_deliver) from [] (do_signal+0x78/0x3a0) [] (do_signal) from [] (do_work_pending+0xa4/0xb4) [] (do_work_pending) from [] (work_pending+0xc/0x20) ---[ end trace 5faa75e8c2f8a6a2 ]--- Signed-off-by: Lad, Prabhakar Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab --- drivers/media/platform/davinci/vpif_display.c | 35 ++++++++++++++++++--------- 1 file changed, 23 insertions(+), 12 deletions(-) (limited to 'drivers') diff --git a/drivers/media/platform/davinci/vpif_display.c b/drivers/media/platform/davinci/vpif_display.c index 0ac841e35aa4..aed41edd0501 100644 --- a/drivers/media/platform/davinci/vpif_display.c +++ b/drivers/media/platform/davinci/vpif_display.c @@ -320,8 +320,31 @@ static int vpif_stop_streaming(struct vb2_queue *vq) common = &ch->common[VPIF_VIDEO_INDEX]; + /* Disable channel */ + if (VPIF_CHANNEL2_VIDEO == ch->channel_id) { + enable_channel2(0); + channel2_intr_enable(0); + } + if ((VPIF_CHANNEL3_VIDEO == ch->channel_id) || + (2 == common->started)) { + enable_channel3(0); + channel3_intr_enable(0); + } + common->started = 0; + /* release all active buffers */ spin_lock_irqsave(&common->irqlock, flags); + if (common->cur_frm == common->next_frm) { + vb2_buffer_done(&common->cur_frm->vb, VB2_BUF_STATE_ERROR); + } else { + if (common->cur_frm != NULL) + vb2_buffer_done(&common->cur_frm->vb, + VB2_BUF_STATE_ERROR); + if (common->next_frm != NULL) + vb2_buffer_done(&common->next_frm->vb, + VB2_BUF_STATE_ERROR); + } + while (!list_empty(&common->dma_queue)) { common->next_frm = list_entry(common->dma_queue.next, struct vpif_disp_buffer, list); @@ -773,18 +796,6 @@ static int vpif_release(struct file *filep) if (fh->io_allowed[VPIF_VIDEO_INDEX]) { /* Reset io_usrs member of channel object */ common->io_usrs = 0; - /* Disable channel */ - if (VPIF_CHANNEL2_VIDEO == ch->channel_id) { - enable_channel2(0); - channel2_intr_enable(0); - } - if ((VPIF_CHANNEL3_VIDEO == ch->channel_id) || - (2 == common->started)) { - enable_channel3(0); - channel3_intr_enable(0); - } - common->started = 0; - /* Free buffers allocated */ vb2_queue_release(&common->buffer_queue); vb2_dma_contig_cleanup_ctx(common->alloc_ctx); -- cgit v1.2.1 From b699f09d0d003cc1622aec30d81f3158da6790aa Mon Sep 17 00:00:00 2001 From: "Lad, Prabhakar" Date: Sat, 22 Mar 2014 08:03:09 -0300 Subject: [media] media: davinci: vpbe_display: fix releasing of active buffers from commit-id: b3379c6201bb3555298cdbf0aa004af260f2a6a4 "vb2: only call start_streaming if sufficient buffers are queued" the vb2 framework warns on (WARN_ON()) if all the active buffers are not released when streaming is stopped, initially the vb2 silently released the buffer internally if the buffer was not released by the driver. This patch fixes following issue: WARNING: CPU: 0 PID: 2049 at drivers/media/v4l2-core/videobuf2-core.c:2011 __vb2_queue_cancel+0x1a0/0x218() Modules linked in: CPU: 0 PID: 2049 Comm: vpbe_display Tainted: G W 3.14.0-rc5-00414-ged97a6f #89 [] (unwind_backtrace) from [] (show_stack+0x10/0x14) [] (show_stack) from [] (warn_slowpath_common+0x68/0x88) [] (warn_slowpath_common) from [] (warn_slowpath_null+0x1c/0x24) [] (warn_slowpath_null) from [] (__vb2_queue_cancel+0x1a0/0x218) [] (__vb2_queue_cancel) from [] (vb2_queue_release+0x14/0x24) [] (vb2_queue_release) from [] (vpbe_display_release+0x60/0x230) [] (vpbe_display_release) from [] (v4l2_release+0x34/0x74) [] (v4l2_release) from [] (__fput+0x80/0x224) [] (__fput) from [] (task_work_run+0xa0/0xd0) [] (task_work_run) from [] (do_exit+0x244/0x918) [] (do_exit) from [] (do_group_exit+0x48/0xdc) [] (do_group_exit) from [] (get_signal_to_deliver+0x2a0/0x5bc) [] (get_signal_to_deliver) from [] (do_signal+0x78/0x3a0) [] (do_signal) from [] (do_work_pending+0xa4/0xb4) [] (do_work_pending) from [] (work_pending+0xc/0x20) ---[ end trace 5faa75e8c2f8a6a1 ]--- ------------[ cut here ]------------ WARNING: CPU: 0 PID: 2049 at drivers/media/v4l2-core/videobuf2-core.c:1095 vb2_buffer_done+0x1e0/0x224() Modules linked in: CPU: 0 PID: 2049 Comm: vpbe_display Tainted: G W 3.14.0-rc5-00414-ged97a6f #89 [] (unwind_backtrace) from [] (show_stack+0x10/0x14) [] (show_stack) from [] (warn_slowpath_common+0x68/0x88) [] (warn_slowpath_common) from [] (warn_slowpath_null+0x1c/0x24) [] (warn_slowpath_null) from [] (vb2_buffer_done+0x1e0/0x224) [] (vb2_buffer_done) from [] (__vb2_queue_cancel+0x1d0/0x218) [] (__vb2_queue_cancel) from [] (vb2_queue_release+0x14/0x24) [] (vb2_queue_release) from [] (vpbe_display_release+0x60/0x230) [] (vpbe_display_release) from [] (v4l2_release+0x34/0x74) [] (v4l2_release) from [] (__fput+0x80/0x224) [] (__fput) from [] (task_work_run+0xa0/0xd0) [] (task_work_run) from [] (do_exit+0x244/0x918) [] (do_exit) from [] (do_group_exit+0x48/0xdc) [] (do_group_exit) from [] (get_signal_to_deliver+0x2a0/0x5bc) [] (get_signal_to_deliver) from [] (do_signal+0x78/0x3a0) [] (do_signal) from [] (do_work_pending+0xa4/0xb4) [] (do_work_pending) from [] (work_pending+0xc/0x20) ---[ end trace 5faa75e8c2f8a6a2 ]--- Signed-off-by: Lad, Prabhakar Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab --- drivers/media/platform/davinci/vpbe_display.c | 16 +++++++++++++++- 1 file changed, 15 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/media/platform/davinci/vpbe_display.c b/drivers/media/platform/davinci/vpbe_display.c index b4f12d00be05..656708252962 100644 --- a/drivers/media/platform/davinci/vpbe_display.c +++ b/drivers/media/platform/davinci/vpbe_display.c @@ -372,18 +372,32 @@ static int vpbe_stop_streaming(struct vb2_queue *vq) { struct vpbe_fh *fh = vb2_get_drv_priv(vq); struct vpbe_layer *layer = fh->layer; + struct vpbe_display *disp = fh->disp_dev; + unsigned long flags; if (!vb2_is_streaming(vq)) return 0; /* release all active buffers */ + spin_lock_irqsave(&disp->dma_queue_lock, flags); + if (layer->cur_frm == layer->next_frm) { + vb2_buffer_done(&layer->cur_frm->vb, VB2_BUF_STATE_ERROR); + } else { + if (layer->cur_frm != NULL) + vb2_buffer_done(&layer->cur_frm->vb, + VB2_BUF_STATE_ERROR); + if (layer->next_frm != NULL) + vb2_buffer_done(&layer->next_frm->vb, + VB2_BUF_STATE_ERROR); + } + while (!list_empty(&layer->dma_queue)) { layer->next_frm = list_entry(layer->dma_queue.next, struct vpbe_disp_buffer, list); list_del(&layer->next_frm->list); vb2_buffer_done(&layer->next_frm->vb, VB2_BUF_STATE_ERROR); } - + spin_unlock_irqrestore(&disp->dma_queue_lock, flags); return 0; } -- cgit v1.2.1 From d891ae5ef1efda590569b4483664c64b4aca4a4d Mon Sep 17 00:00:00 2001 From: "Lad, Prabhakar" Date: Sun, 23 Mar 2014 02:16:46 -0300 Subject: [media] staging: media: davinci: vpfe: make sure all the buffers are released from commit-id: b3379c6201bb3555298cdbf0aa004af260f2a6a4 "vb2: only call start_streaming if sufficient buffers are queued" the vb2 framework warns on (WARN_ON()) if all the active buffers are not released when streaming is stopped, initially the vb2 silently released the buffer internally if the buffer was not released by the driver. This patch fixes following issue: WARNING: CPU: 0 PID: 2049 at drivers/media/v4l2-core/videobuf2-core.c:2011 __vb2_queue_cancel+0x1a0/0x218() Modules linked in: CPU: 0 PID: 2049 Comm: vpfe_video Tainted: G W 3.14.0-rc5-00414-ged97a6f #89 [] (unwind_backtrace) from [] (show_stack+0x10/0x14) [] (show_stack) from [] (warn_slowpath_common+0x68/0x88) [] (warn_slowpath_common) from [] (warn_slowpath_null+0x1c/0x24) [] (warn_slowpath_null) from [] (__vb2_queue_cancel+0x1a0/0x218) [] (__vb2_queue_cancel) from [] (vb2_queue_release+0x14/0x24) [] (vb2_queue_release) from [] (vpfe_release+0x60/0x230) [] (vpfe_release) from [] (v4l2_release+0x34/0x74) [] (v4l2_release) from [] (__fput+0x80/0x224) [] (__fput) from [] (task_work_run+0xa0/0xd0) [] (task_work_run) from [] (do_exit+0x244/0x918) [] (do_exit) from [] (do_group_exit+0x48/0xdc) [] (do_group_exit) from [] (get_signal_to_deliver+0x2a0/0x5bc) [] (get_signal_to_deliver) from [] (do_signal+0x78/0x3a0) [] (do_signal) from [] (do_work_pending+0xa4/0xb4) [] (do_work_pending) from [] (work_pending+0xc/0x20) ---[ end trace 5faa75e8c2f8a6a1 ]--- ------------[ cut here ]------------ WARNING: CPU: 0 PID: 2049 at drivers/media/v4l2-core/videobuf2-core.c:1095 vb2_buffer_done+0x1e0/0x224() Modules linked in: CPU: 0 PID: 2049 Comm: vpfe_video Tainted: G W 3.14.0-rc5-00414-ged97a6f #89 [] (unwind_backtrace) from [] (show_stack+0x10/0x14) [] (show_stack) from [] (warn_slowpath_common+0x68/0x88) [] (warn_slowpath_common) from [] (warn_slowpath_null+0x1c/0x24) [] (warn_slowpath_null) from [] (vb2_buffer_done+0x1e0/0x224) [] (vb2_buffer_done) from [] (__vb2_queue_cancel+0x1d0/0x218) [] (__vb2_queue_cancel) from [] (vb2_queue_release+0x14/0x24) [] (vb2_queue_release) from [] (vpfe_release+0x60/0x230) [] (vpfe_release) from [] (v4l2_release+0x34/0x74) [] (v4l2_release) from [] (__fput+0x80/0x224) [] (__fput) from [] (task_work_run+0xa0/0xd0) [] (task_work_run) from [] (do_exit+0x244/0x918) [] (do_exit) from [] (do_group_exit+0x48/0xdc) [] (do_group_exit) from [] (get_signal_to_deliver+0x2a0/0x5bc) [] (get_signal_to_deliver) from [] (do_signal+0x78/0x3a0) [] (do_signal) from [] (do_work_pending+0xa4/0xb4) [] (do_work_pending) from [] (work_pending+0xc/0x20) ---[ end trace 5faa75e8c2f8a6a2 ]--- Signed-off-by: Lad, Prabhakar Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab --- drivers/staging/media/davinci_vpfe/vpfe_video.c | 13 +++++++++++-- 1 file changed, 11 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/staging/media/davinci_vpfe/vpfe_video.c b/drivers/staging/media/davinci_vpfe/vpfe_video.c index 8c101cbbee97..acc8184c46cd 100644 --- a/drivers/staging/media/davinci_vpfe/vpfe_video.c +++ b/drivers/staging/media/davinci_vpfe/vpfe_video.c @@ -1247,9 +1247,18 @@ static int vpfe_stop_streaming(struct vb2_queue *vq) struct vpfe_fh *fh = vb2_get_drv_priv(vq); struct vpfe_video_device *video = fh->video; - if (!vb2_is_streaming(vq)) - return 0; /* release all active buffers */ + if (video->cur_frm == video->next_frm) { + vb2_buffer_done(&video->cur_frm->vb, VB2_BUF_STATE_ERROR); + } else { + if (video->cur_frm != NULL) + vb2_buffer_done(&video->cur_frm->vb, + VB2_BUF_STATE_ERROR); + if (video->next_frm != NULL) + vb2_buffer_done(&video->next_frm->vb, + VB2_BUF_STATE_ERROR); + } + while (!list_empty(&video->dma_queue)) { video->next_frm = list_entry(video->dma_queue.next, struct vpfe_cap_buffer, list); -- cgit v1.2.1 From c1d1e40b8bbd712d6a8c74d8278178c8448b7abc Mon Sep 17 00:00:00 2001 From: "Lad, Prabhakar" Date: Sun, 23 Mar 2014 02:44:11 -0300 Subject: [media] media: davinci: vpfe: make sure all the buffers unmapped and released this patch makes sure that it terminates if any IO in progress and also makes sure that all the buffers are unmapped. It was observed that with several runs of application the application sometimes failed to allocate memory, This patch makes sure it all the buffers are released. Using kmemleak it was found that buffer were not released, this patch fixes following issue, echo scan > /sys/kernel/debug/kmemleak Kernel message reads: memleak: 3 new suspected memory leaks (see /sys/kernel/debug/kmemleak) Then, cat /sys/kernel/debug/kmemleak unreferenced object 0xc564a480 (size 192): comm "mttest", pid 764, jiffies 4294945878 (age 487.160s) hex dump (first 32 bytes): 00 00 00 00 28 07 07 20 d0 02 00 00 e0 01 00 00 ....(.. ........ 00 00 00 00 00 64 05 00 01 00 00 00 01 00 00 00 .....d.......... backtrace: [] create_object+0x10c/0x28c [] kmemleak_alloc+0x3c/0x70 [] __kmalloc+0x11c/0x1d4 [] __videobuf_alloc+0x1c/0x3c [] videobuf_alloc_vb+0x38/0x80 [] __videobuf_mmap_setup+0x9c/0x108 [] videobuf_reqbufs.part.10+0x12c/0x1bc [] videobuf_reqbufs+0x6c/0x8c [] vpfe_reqbufs+0xcc/0x130 [] v4l_reqbufs+0x50/0x54 [] __video_do_ioctl+0x260/0x2c4 [] video_usercopy+0xf0/0x310 [] video_ioctl2+0x14/0x1c [] v4l2_ioctl+0x104/0x14c [] do_vfs_ioctl+0x80/0x2d0 [] SyS_ioctl+0x44/0x64 unreferenced object 0xc564ac00 (size 192): comm "mttest", pid 764, jiffies 4294945878 (age 487.160s) hex dump (first 32 bytes): 01 00 00 00 28 07 07 20 d0 02 00 00 e0 01 00 00 ....(.. ........ 00 00 00 00 00 64 05 00 01 00 00 00 01 00 00 00 .....d.......... backtrace: [] create_object+0x10c/0x28c [] kmemleak_alloc+0x3c/0x70 [] __kmalloc+0x11c/0x1d4 [] __videobuf_alloc+0x1c/0x3c [] videobuf_alloc_vb+0x38/0x80 [] __videobuf_mmap_setup+0x9c/0x108 [] videobuf_reqbufs.part.10+0x12c/0x1bc [] videobuf_reqbufs+0x6c/0x8c [] vpfe_reqbufs+0xcc/0x130 [] v4l_reqbufs+0x50/0x54 [] __video_do_ioctl+0x260/0x2c4 [] video_usercopy+0xf0/0x310 [] video_ioctl2+0x14/0x1c [] v4l2_ioctl+0x104/0x14c [] do_vfs_ioctl+0x80/0x2d0 [] SyS_ioctl+0x44/0x64 unreferenced object 0xc564a180 (size 192): comm "mttest", pid 764, jiffies 4294945880 (age 487.140s) hex dump (first 32 bytes): 02 00 00 00 28 07 07 20 d0 02 00 00 e0 01 00 00 ....(.. ........ 00 00 00 00 00 64 05 00 01 00 00 00 01 00 00 00 .....d.......... backtrace: [] create_object+0x10c/0x28c [] kmemleak_alloc+0x3c/0x70 [] __kmalloc+0x11c/0x1d4 [] __videobuf_alloc+0x1c/0x3c [] videobuf_alloc_vb+0x38/0x80 [] __videobuf_mmap_setup+0x9c/0x108 [] videobuf_reqbufs.part.10+0x12c/0x1bc [] videobuf_reqbufs+0x6c/0x8c [] vpfe_reqbufs+0xcc/0x130 [] v4l_reqbufs+0x50/0x54 [] __video_do_ioctl+0x260/0x2c4 [] video_usercopy+0xf0/0x310 [] video_ioctl2+0x14/0x1c [] v4l2_ioctl+0x104/0x14c [] do_vfs_ioctl+0x80/0x2d0 [] SyS_ioctl+0x44/0x64 Reported-by: Jimmy Ho Signed-off-by: Lad, Prabhakar Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab --- drivers/media/platform/davinci/vpfe_capture.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'drivers') diff --git a/drivers/media/platform/davinci/vpfe_capture.c b/drivers/media/platform/davinci/vpfe_capture.c index d762246eabf5..0379cb9f9a9c 100644 --- a/drivers/media/platform/davinci/vpfe_capture.c +++ b/drivers/media/platform/davinci/vpfe_capture.c @@ -734,6 +734,8 @@ static int vpfe_release(struct file *file) } vpfe_dev->io_usrs = 0; vpfe_dev->numbuffers = config_params.numbuffers; + videobuf_stop(&vpfe_dev->buffer_queue); + videobuf_mmap_free(&vpfe_dev->buffer_queue); } /* Decrement device usrs counter */ -- cgit v1.2.1 From 877ed143065c3b823cfe54b5a695c6be3659e445 Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Fri, 11 Apr 2014 04:15:32 -0300 Subject: [media] Prefer gspca_sonixb over sn9c102 for all devices The sn9c102 driver is deprecated. It was moved to staging in anticipation of its removal in a future kernel version. However, USB devices 0C45:6024 and 0C45:6025 are still handled by sn9c102 when both sn9c102 and gspca_sonixb are enabled. We must migrate all the users of these devices to the gspca_sonixb driver now, so that it gets sufficient testing before the sn9c102 driver is finally phased out. Signed-off-by: Jean Delvare Acked-by: Greg Kroah-Hartman Acked-by: Hans de Goede Signed-off-by: Mauro Carvalho Chehab --- drivers/media/usb/gspca/sonixb.c | 2 -- drivers/staging/media/sn9c102/sn9c102_devtable.h | 2 -- 2 files changed, 4 deletions(-) (limited to 'drivers') diff --git a/drivers/media/usb/gspca/sonixb.c b/drivers/media/usb/gspca/sonixb.c index 7277dbd2afcd..ecbcb39feb71 100644 --- a/drivers/media/usb/gspca/sonixb.c +++ b/drivers/media/usb/gspca/sonixb.c @@ -1430,10 +1430,8 @@ static const struct usb_device_id device_table[] = { {USB_DEVICE(0x0c45, 0x600d), SB(PAS106, 101)}, {USB_DEVICE(0x0c45, 0x6011), SB(OV6650, 101)}, {USB_DEVICE(0x0c45, 0x6019), SB(OV7630, 101)}, -#if !IS_ENABLED(CONFIG_USB_SN9C102) {USB_DEVICE(0x0c45, 0x6024), SB(TAS5130CXX, 102)}, {USB_DEVICE(0x0c45, 0x6025), SB(TAS5130CXX, 102)}, -#endif {USB_DEVICE(0x0c45, 0x6027), SB(OV7630, 101)}, /* Genius Eye 310 */ {USB_DEVICE(0x0c45, 0x6028), SB(PAS202, 102)}, {USB_DEVICE(0x0c45, 0x6029), SB(PAS106, 102)}, diff --git a/drivers/staging/media/sn9c102/sn9c102_devtable.h b/drivers/staging/media/sn9c102/sn9c102_devtable.h index b3d2cc729657..4ba569258498 100644 --- a/drivers/staging/media/sn9c102/sn9c102_devtable.h +++ b/drivers/staging/media/sn9c102/sn9c102_devtable.h @@ -48,10 +48,8 @@ static const struct usb_device_id sn9c102_id_table[] = { { SN9C102_USB_DEVICE(0x0c45, 0x600d, BRIDGE_SN9C102), }, /* { SN9C102_USB_DEVICE(0x0c45, 0x6011, BRIDGE_SN9C102), }, OV6650 */ { SN9C102_USB_DEVICE(0x0c45, 0x6019, BRIDGE_SN9C102), }, -#endif { SN9C102_USB_DEVICE(0x0c45, 0x6024, BRIDGE_SN9C102), }, { SN9C102_USB_DEVICE(0x0c45, 0x6025, BRIDGE_SN9C102), }, -#if !defined CONFIG_USB_GSPCA_SONIXB && !defined CONFIG_USB_GSPCA_SONIXB_MODULE { SN9C102_USB_DEVICE(0x0c45, 0x6028, BRIDGE_SN9C102), }, { SN9C102_USB_DEVICE(0x0c45, 0x6029, BRIDGE_SN9C102), }, { SN9C102_USB_DEVICE(0x0c45, 0x602a, BRIDGE_SN9C102), }, -- cgit v1.2.1 From 3a7745215e7f73a5c7d9bcdc50661a55b39052a3 Mon Sep 17 00:00:00 2001 From: Milan Broz Date: Mon, 14 Apr 2014 22:02:30 +0200 Subject: dm verity: fix biovecs hash calculation regression Commit 003b5c5719f159f4f4bf97511c4702a0638313dd ("block: Convert drivers to immutable biovecs") incorrectly converted biovec iteration in dm-verity to always calculate the hash from a full biovec, but the function only needs to calculate the hash from part of the biovec (up to the calculated "todo" value). Fix this issue by limiting hash input to only the requested data size. This problem was identified using the cryptsetup regression test for veritysetup (verity-compat-test). Signed-off-by: Milan Broz Acked-by: Mikulas Patocka Signed-off-by: Mike Snitzer Cc: stable@vger.kernel.org # 3.14+ --- drivers/md/dm-verity.c | 15 +++++++++------ 1 file changed, 9 insertions(+), 6 deletions(-) (limited to 'drivers') diff --git a/drivers/md/dm-verity.c b/drivers/md/dm-verity.c index 796007a5e0e1..7a7bab8947ae 100644 --- a/drivers/md/dm-verity.c +++ b/drivers/md/dm-verity.c @@ -330,15 +330,17 @@ test_block_hash: return r; } } - todo = 1 << v->data_dev_block_bits; - while (io->iter.bi_size) { + do { u8 *page; + unsigned len; struct bio_vec bv = bio_iter_iovec(bio, io->iter); page = kmap_atomic(bv.bv_page); - r = crypto_shash_update(desc, page + bv.bv_offset, - bv.bv_len); + len = bv.bv_len; + if (likely(len >= todo)) + len = todo; + r = crypto_shash_update(desc, page + bv.bv_offset, len); kunmap_atomic(page); if (r < 0) { @@ -346,8 +348,9 @@ test_block_hash: return r; } - bio_advance_iter(bio, &io->iter, bv.bv_len); - } + bio_advance_iter(bio, &io->iter, len); + todo -= len; + } while (todo); if (!v->version) { r = crypto_shash_update(desc, v->salt, v->salt_size); -- cgit v1.2.1 From 3063a12be2b07c64e9802708a19489342e64c1a3 Mon Sep 17 00:00:00 2001 From: Felipe Balbi Date: Fri, 28 Mar 2014 14:31:47 -0500 Subject: usb: musb: fix PHY power on/off MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit commi 30a70b0 (usb: musb: fix obex in g_nokia.ko causing kernel panic) removed phy_power_on() and phy_power_off() calls from runtime PM callbacks but it failed to note that the driver depended on pm_runtime_get_sync() calls to power up the PHY, thus leaving some platforms without any means to have a working PHY. Fix that by enabling the phy during omap2430_musb_init() and killing it in omap2430_musb_exit(). Fixes: 30a70b0 (usb: musb: fix obex in g_nokia.ko causing kernel panic) Cc: # v3.14 Cc: Pali Rohár Cc: Ivaylo Dimitrov Reported-by: Michael Scott Tested-by: Michael Scott Tested-by: Stefan Roese Reported-by: Rabin Vincent Signed-off-by: Felipe Balbi --- drivers/usb/musb/omap2430.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'drivers') diff --git a/drivers/usb/musb/omap2430.c b/drivers/usb/musb/omap2430.c index d341c149a2f9..819a7cdcb866 100644 --- a/drivers/usb/musb/omap2430.c +++ b/drivers/usb/musb/omap2430.c @@ -416,6 +416,7 @@ static int omap2430_musb_init(struct musb *musb) omap_musb_set_mailbox(glue); phy_init(musb->phy); + phy_power_on(musb->phy); pm_runtime_put_noidle(musb->controller); return 0; @@ -478,6 +479,7 @@ static int omap2430_musb_exit(struct musb *musb) del_timer_sync(&musb_idle_timer); omap2430_low_level_exit(musb); + phy_power_off(musb->phy); phy_exit(musb->phy); return 0; -- cgit v1.2.1 From 8b2bc2c9351b4c09bc3d9096e2a7af3988565dbf Mon Sep 17 00:00:00 2001 From: Felipe Balbi Date: Mon, 7 Apr 2014 10:58:01 -0500 Subject: usb: musb: omap2430: make sure clocks are enabled when running mailbox on early initialization we could fall into a situation where the mailbox is called before MUSB's clocks are running, in order to avoid that, make sure mailbox is always wrapped with pm_runtime calls. Reported-by: Stefan Roese Signed-off-by: Felipe Balbi --- drivers/usb/musb/omap2430.c | 6 ++++++ 1 file changed, 6 insertions(+) (limited to 'drivers') diff --git a/drivers/usb/musb/omap2430.c b/drivers/usb/musb/omap2430.c index 819a7cdcb866..d369bf1f3936 100644 --- a/drivers/usb/musb/omap2430.c +++ b/drivers/usb/musb/omap2430.c @@ -316,7 +316,13 @@ static void omap_musb_mailbox_work(struct work_struct *mailbox_work) { struct omap2430_glue *glue = container_of(mailbox_work, struct omap2430_glue, omap_musb_mailbox_work); + struct musb *musb = glue_to_musb(glue); + struct device *dev = musb->controller; + + pm_runtime_get_sync(dev); omap_musb_set_mailbox(glue); + pm_runtime_mark_last_busy(dev); + pm_runtime_put_autosuspend(dev); } static irqreturn_t omap2430_musb_interrupt(int irq, void *__hci) -- cgit v1.2.1 From 32702e96a9f76ea0e0a1d218310d2ac1adbd2907 Mon Sep 17 00:00:00 2001 From: Jack Pham Date: Wed, 26 Mar 2014 10:31:44 -0700 Subject: usb: dwc3: gadget: Iterate only over valid endpoints Make dwc3_gadget_resize_tx_fifos() iterate only over IN endpoints that are actually present, based on the num_in_eps parameter. This terminates the loop so as to prevent dereferencing a potential NULL dwc->eps[i] where i >= (num_in_eps + num_out_eps). Signed-off-by: Jack Pham Signed-off-by: Felipe Balbi --- drivers/usb/dwc3/gadget.c | 12 ++++-------- 1 file changed, 4 insertions(+), 8 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c index a740eac74d56..70715eeededd 100644 --- a/drivers/usb/dwc3/gadget.c +++ b/drivers/usb/dwc3/gadget.c @@ -187,15 +187,12 @@ int dwc3_gadget_resize_tx_fifos(struct dwc3 *dwc) * improve this algorithm so that we better use the internal * FIFO space */ - for (num = 0; num < DWC3_ENDPOINTS_NUM; num++) { - struct dwc3_ep *dep = dwc->eps[num]; - int fifo_number = dep->number >> 1; + for (num = 0; num < dwc->num_in_eps; num++) { + /* bit0 indicates direction; 1 means IN ep */ + struct dwc3_ep *dep = dwc->eps[(num << 1) | 1]; int mult = 1; int tmp; - if (!(dep->number & 1)) - continue; - if (!(dep->flags & DWC3_EP_ENABLED)) continue; @@ -224,8 +221,7 @@ int dwc3_gadget_resize_tx_fifos(struct dwc3 *dwc) dev_vdbg(dwc->dev, "%s: Fifo Addr %04x Size %d\n", dep->name, last_fifo_depth, fifo_size & 0xffff); - dwc3_writel(dwc->regs, DWC3_GTXFIFOSIZ(fifo_number), - fifo_size); + dwc3_writel(dwc->regs, DWC3_GTXFIFOSIZ(num), fifo_size); last_fifo_depth += (fifo_size & 0xffff); } -- cgit v1.2.1 From 9c1b70361e0b38e4acb8e62b54da66538cb77ff2 Mon Sep 17 00:00:00 2001 From: Roger Quadros Date: Wed, 26 Mar 2014 18:46:38 +0200 Subject: usb: gadget: zero: Fix SuperSpeed enumeration for alternate setting 1 It was impossible to enumerate on a SuperSpeed (XHCI) host with alternate setting = 1 due to the wrongly set 'bMaxBurst' field in the SuperSpeed Endpoint Companion descriptor. Testcase: modprobe -r usbtest; modprobe usbtest alt=1 modprobe g_zero plug device to SuperSpeed port on the host. Without this patch the host always complains like so "usb 12-2: Not enough bandwidth for new device state. usb 12-2: Not enough bandwidth for altsetting 1" Bug was introduced by commit cf9a08ae in v3.9 Fixes: cf9a08ae5aec (usb: gadget: convert source sink and loopback to new function interface) Cc: 3.9+ # 3.9+ Reviewed-by: Felipe Balbi Acked-by: Sebastian Andrzej Siewior Signed-off-by: Roger Quadros Signed-off-by: Felipe Balbi --- drivers/usb/gadget/zero.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/usb/gadget/zero.c b/drivers/usb/gadget/zero.c index 9f170c53e3d9..134f354ede62 100644 --- a/drivers/usb/gadget/zero.c +++ b/drivers/usb/gadget/zero.c @@ -300,7 +300,7 @@ static int __init zero_bind(struct usb_composite_dev *cdev) ss_opts->isoc_interval = gzero_options.isoc_interval; ss_opts->isoc_maxpacket = gzero_options.isoc_maxpacket; ss_opts->isoc_mult = gzero_options.isoc_mult; - ss_opts->isoc_maxburst = gzero_options.isoc_maxpacket; + ss_opts->isoc_maxburst = gzero_options.isoc_maxburst; ss_opts->bulk_buflen = gzero_options.bulk_buflen; func_ss = usb_get_function(func_inst_ss); -- cgit v1.2.1 From f45e5f00dacf09362a16339d372fcc96705e40c7 Mon Sep 17 00:00:00 2001 From: Roger Quadros Date: Wed, 26 Mar 2014 11:43:09 +0200 Subject: usb: dwc3: core: Fix gadget for system suspend/resume During system resume, if the event buffers are not setup before the gadget controller starts then we start with invalid context and this can lead to bus access errors. This is especially true for platforms that loose the controller context during system suspend. e.g. AM437x. The following backtrace was found when the system is suspended and resumed with g_zero loaded on AM437x-evm (USB cable connected to host all the while). [ 120.981506] WARNING: CPU: 0 PID: 1656 at drivers/bus/omap_l3_noc.c:137 l3_interrupt_handler+0x198/0x28c() [ 120.981514] L3 custom error: MASTER:USB0 WR TARGET:GPMC [ 120.981638] Modules linked in: g_mass_storage usb_f_mass_storage libcomposite configfs bufferclass_ti(O) omaplfb(O) cryptodev(O) dwc3 snd_soc_evm snd_soc_omap snd_pe [ 120.981659] CPU: 0 PID: 1656 Comm: sh Tainted: G O 3.12.10-gc559824 #1 [ 120.981669] Backtrace: [ 120.981705] [] (dump_backtrace+0x0/0x10c) from [] (show_stack+0x18/0x1c) [ 120.981730] r6:c02819ac r5:00000009 r4:ec137cb8 r3:00000000 [ 120.981767] [] (show_stack+0x0/0x1c) from [] (dump_stack+0x20/0x28) [ 120.981802] [] (dump_stack+0x0/0x28) from [] (warn_slowpath_common+0x70/0x90) [ 120.981830] [] (warn_slowpath_common+0x0/0x90) from [] (warn_slowpath_fmt+0x38/0x40) [ 120.981856] r8:c0855eb0 r7:00000002 r6:f1000700 r5:00000007 r4:80080003 [ 120.981886] [] (warn_slowpath_fmt+0x0/0x40) from [] (l3_interrupt_handler+0x198/0x28c) [ 120.981900] r3:c0801ab8 r2:c06cb354 [ 120.981936] [] (l3_interrupt_handler+0x0/0x28c) from [] (handle_irq_event_percpu+0x54/0x1b8) [ 120.981962] [] (handle_irq_event_percpu+0x0/0x1b8) from [] (handle_irq_event+0x30/0x40) [ 120.981993] [] (handle_irq_event+0x0/0x40) from [] (handle_fasteoi_irq+0x74/0x128) [ 120.982006] r4:ed0056c0 r3:00000000 [ 120.982033] [] (handle_fasteoi_irq+0x0/0x128) from [] (generic_handle_irq+0x28/0x38) [ 120.982046] r4:0000002a r3:c0073fe4 [ 120.982085] [] (generic_handle_irq+0x0/0x38) from [] (handle_IRQ+0x38/0x8c) [ 120.982098] r4:c080137c r3:00000182 [ 120.982124] [] (handle_IRQ+0x0/0x8c) from [] (gic_handle_irq+0x30/0x5c) [ 120.982145] r6:ec137dd0 r5:c07ac480 r4:fa24010c r3:00000100 [ 120.982169] [] (gic_handle_irq+0x0/0x5c) from [] (__irq_svc+0x40/0x54) [ 120.982179] Exception stack(0xec137dd0 to 0xec137e18) [ 120.982195] 7dc0: 00000000 a00001d3 00000000 00000004 [ 120.982216] 7de0: a0000153 ec1d9010 c080de90 ec137e30 c080debc 00000000 ed756e44 ec137e2c [ 120.982232] 7e00: ec137de0 ec137e18 bf1150e4 bf115474 60000153 ffffffff [ 120.982253] r7:ec137e04 r6:ffffffff r5:60000153 r4:bf115474 [ 120.982327] [] (dwc3_complete+0x0/0x40 [dwc3]) from [] (dpm_complete+0xd4/0x19c) [ 120.982341] r5:ed756e10 r4:ed756e64 [ 120.982370] [] (dpm_complete+0x0/0x19c) from [] (dpm_resume_end+0x1c/0x20) [ 120.982400] [] (dpm_resume_end+0x0/0x20) from [] (suspend_devices_and_enter+0x118/0x33c) [ 120.982412] r4:c0833da4 r3:00000000 [ 120.982436] [] (suspend_devices_and_enter+0x0/0x33c) from [] (pm_suspend+0x218/0x254) [ 120.982458] [] (pm_suspend+0x0/0x254) from [] (state_store+0x70/0xc0) [ 120.982478] r6:c057a6cc r5:c06a8320 r4:00000003 r3:0000006d [ 120.982515] [] (state_store+0x0/0xc0) from [] (kobj_attr_store+0x1c/0x28) [ 120.982546] [] (kobj_attr_store+0x0/0x28) from [] (sysfs_write_file+0x170/0x1a4) [ 120.982583] [] (sysfs_write_file+0x0/0x1a4) from [] (vfs_write+0xb8/0x190) [ 120.982611] [] (vfs_write+0x0/0x190) from [] (SyS_write+0x44/0x78) [ 120.982641] [] (SyS_write+0x0/0x78) from [] (ret_fast_syscall+0x0/0x30) Signed-off-by: Roger Quadros Acked-by: Felipe Balbi Signed-off-by: Felipe Balbi --- drivers/usb/dwc3/core.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c index d001417e8e37..10aaaae9af25 100644 --- a/drivers/usb/dwc3/core.c +++ b/drivers/usb/dwc3/core.c @@ -821,6 +821,7 @@ static void dwc3_complete(struct device *dev) spin_lock_irqsave(&dwc->lock, flags); + dwc3_event_buffers_setup(dwc); switch (dwc->dr_mode) { case USB_DR_MODE_PERIPHERAL: case USB_DR_MODE_OTG: @@ -828,7 +829,6 @@ static void dwc3_complete(struct device *dev) /* FALLTHROUGH */ case USB_DR_MODE_HOST: default: - dwc3_event_buffers_setup(dwc); break; } -- cgit v1.2.1 From 5cdf7d5be8443ba0e14a5cfe551c59f931983647 Mon Sep 17 00:00:00 2001 From: Lubomir Rintel Date: Thu, 27 Mar 2014 08:09:21 +0100 Subject: usb: gadget: gadgetfs: Initialize CHIP to NULL before UDC probe Otherwise the value from the last probe would be retained that possibly is freed since (the UDC is removed) and therefore no longer relevant. Reproducible with the dummy UDC: modprobe dummy_hcd mount -t gadgetfs gadgetfs /dev/gadget umount /dev/gadget rmmod dummy_hcd mount -t gadgetfs gadgetfs /dev/gadget BUG: unable to handle kernel paging request at ffffffffa066fd9d Call Trace: [] ? d_alloc_name+0x22/0x50 [] ? selinux_d_instantiate+0x1c/0x20 [] gadgetfs_create_file+0x27/0xa0 [gadgetfs] [] ? setup_req.isra.4+0x80/0x80 [gadgetfs] [] gadgetfs_fill_super+0x13c/0x180 [gadgetfs] [] mount_single+0x92/0xc0 [] gadgetfs_mount+0x18/0x20 [gadgetfs] [] mount_fs+0x39/0x1b0 [] ? __alloc_percpu+0x10/0x20 [] vfs_kern_mount+0x63/0xf0 [] do_mount+0x23e/0xac0 [] ? strndup_user+0x4b/0xf0 [] SyS_mount+0x83/0xc0 [] system_call_fastpath+0x16/0x1b Signed-off-by: Lubomir Rintel Signed-off-by: Felipe Balbi --- drivers/usb/gadget/inode.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/usb/gadget/inode.c b/drivers/usb/gadget/inode.c index b5be6f0308c2..a925d0cbcd41 100644 --- a/drivers/usb/gadget/inode.c +++ b/drivers/usb/gadget/inode.c @@ -2043,6 +2043,7 @@ gadgetfs_fill_super (struct super_block *sb, void *opts, int silent) return -ESRCH; /* fake probe to determine $CHIP */ + CHIP = NULL; usb_gadget_probe_driver(&probe_driver); if (!CHIP) return -ENODEV; -- cgit v1.2.1 From 0fca91b8a446d4a38b8f3d4772c4a8665ebcd7b2 Mon Sep 17 00:00:00 2001 From: Daniel Mack Date: Wed, 2 Apr 2014 11:46:51 +0200 Subject: usb: musb: dsps: move debugfs_remove_recursive() When the platform initialization fails due to missing resources, it will return -EPROBE_DEFER after dsps_musb_init() has been called. dsps_musb_init() calls dsps_musb_dbg_init() to allocate the debugfs nodes. At a later point in time, the probe will be retried, and dsps_musb_dbg_init() will be called again. debugfs_create_dir() will fail this time, as the node already exists, and so the entire device probe will fail with -ENOMEM. Fix this by moving debugfs_remove_recursive() from dsps_remove() to the plaform's exit function, so it will be cleanly torn down when the probe fails. It also feels more natural this way, as .exit is the counterpart to .init. Signed-off-by: Daniel Mack Signed-off-by: Felipe Balbi --- drivers/usb/musb/musb_dsps.c | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/musb/musb_dsps.c b/drivers/usb/musb/musb_dsps.c index 3372ded5def7..e2fd263585de 100644 --- a/drivers/usb/musb/musb_dsps.c +++ b/drivers/usb/musb/musb_dsps.c @@ -470,8 +470,9 @@ static int dsps_musb_exit(struct musb *musb) struct dsps_glue *glue = dev_get_drvdata(dev->parent); del_timer_sync(&glue->timer); - usb_phy_shutdown(musb->xceiv); + debugfs_remove_recursive(glue->dbgfs_root); + return 0; } @@ -708,8 +709,6 @@ static int dsps_remove(struct platform_device *pdev) pm_runtime_put(&pdev->dev); pm_runtime_disable(&pdev->dev); - debugfs_remove_recursive(glue->dbgfs_root); - return 0; } -- cgit v1.2.1 From fc696881c6ec991f39a2f93d41f9ae841c6ace38 Mon Sep 17 00:00:00 2001 From: Suresh Gupta Date: Wed, 2 Apr 2014 22:26:46 +0530 Subject: usb : gadget : fsl: fix the fault issue on rmmod completion in udc_controller->done should be assign with proper value before complete called. The complete called in fsl_udc_release which intern called from usb_del_gadget_udc, so moving assignment before calling usb_del_gadget_udc Signed-off-by: Suresh Gupta Signed-off-by: Felipe Balbi --- drivers/usb/gadget/fsl_udc_core.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/usb/gadget/fsl_udc_core.c b/drivers/usb/gadget/fsl_udc_core.c index 15960af0f67e..dcd0b07ae3a0 100644 --- a/drivers/usb/gadget/fsl_udc_core.c +++ b/drivers/usb/gadget/fsl_udc_core.c @@ -2532,8 +2532,8 @@ static int __exit fsl_udc_remove(struct platform_device *pdev) if (!udc_controller) return -ENODEV; - usb_del_gadget_udc(&udc_controller->gadget); udc_controller->done = &done; + usb_del_gadget_udc(&udc_controller->gadget); fsl_udc_clk_release(); -- cgit v1.2.1 From ae8dd0cc4146740e24ffb2092530c47e838001c5 Mon Sep 17 00:00:00 2001 From: Fabio Estevam Date: Fri, 4 Apr 2014 22:27:59 -0300 Subject: usb: gadget: rndis: Include "u_rndis.h" Include "u_rndis.h" in order to fix the following sparse warning: drivers/usb/gadget/rndis.c:1144:5: warning: symbol 'rndis_init' was not declared. Should it be static? drivers/usb/gadget/rndis.c:1177:6: warning: symbol 'rndis_exit' was not declared. Should it be static? Signed-off-by: Fabio Estevam Signed-off-by: Felipe Balbi --- drivers/usb/gadget/rndis.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/usb/gadget/rndis.c b/drivers/usb/gadget/rndis.c index d822d822efb3..7ed452d90f4d 100644 --- a/drivers/usb/gadget/rndis.c +++ b/drivers/usb/gadget/rndis.c @@ -35,6 +35,7 @@ #include #include +#include "u_rndis.h" #undef VERBOSE_DEBUG -- cgit v1.2.1 From 9dc9cb0c9ad0f999e29ce4c4f307cd2abbe752d3 Mon Sep 17 00:00:00 2001 From: Mathias Krause Date: Tue, 15 Apr 2014 07:58:15 +0200 Subject: usb: phy: return an error in usb_get_phy() if try_module_get() fails In case we found a matching USB PHY in usb_get_phy() but the call to try_module_get() fails, we shouldn't return a (probably soon dangling) pointer but an ERR_PTR instead. Signed-off-by: Mathias Krause Signed-off-by: Felipe Balbi --- drivers/usb/phy/phy.c | 3 +++ 1 file changed, 3 insertions(+) (limited to 'drivers') diff --git a/drivers/usb/phy/phy.c b/drivers/usb/phy/phy.c index 8afa813d690b..36b6bce33b20 100644 --- a/drivers/usb/phy/phy.c +++ b/drivers/usb/phy/phy.c @@ -132,6 +132,9 @@ struct usb_phy *usb_get_phy(enum usb_phy_type type) if (IS_ERR(phy) || !try_module_get(phy->dev->driver->owner)) { pr_debug("PHY: unable to find transceiver of type %s\n", usb_phy_type_string(type)); + if (!IS_ERR(phy)) + phy = ERR_PTR(-ENODEV); + goto err0; } -- cgit v1.2.1 From 97839ca4b06ab27790700ad7da6be9a75fc0cc1d Mon Sep 17 00:00:00 2001 From: Chao Bi Date: Mon, 14 Apr 2014 11:19:53 +0800 Subject: usb: gadget: ffs: race between ffs_epfile_io() and ffs_func_eps_disable() ffs_epfile_io() is called from userspace, while ffs_func_eps_disable() might be called from USB disconnect interrupt, the two functions would run in parallel but they are not well protected, that epfile->ep would be removed by ffs_func_eps_disable() during ffs_epfile_io() is referring this pointer, then it leads to kernel PANIC. The scenario is as below: Thread 1 Thread 2 | | SyS_read dwc3_gadget_disconnect_interrupt | | ffs_epfile_read reset_config | | ffs_epfile_io ffs_func_eps_disable | | ----- usb_ep_disable(): epfile->ep->ep->desc = NULL | | usb_ep_align_maybe(): ----- it refers ep->desc->wMaxPacketSize ----- Signed-off-by: Chao Bi Signed-off-by: Felipe Balbi --- drivers/usb/gadget/f_fs.c | 7 +++++++ 1 file changed, 7 insertions(+) (limited to 'drivers') diff --git a/drivers/usb/gadget/f_fs.c b/drivers/usb/gadget/f_fs.c index 2e164dca08e8..1e12b3ee56fd 100644 --- a/drivers/usb/gadget/f_fs.c +++ b/drivers/usb/gadget/f_fs.c @@ -745,6 +745,12 @@ static ssize_t ffs_epfile_io(struct file *file, struct ffs_io_data *io_data) */ struct usb_gadget *gadget = epfile->ffs->gadget; + spin_lock_irq(&epfile->ffs->eps_lock); + /* In the meantime, endpoint got disabled or changed. */ + if (epfile->ep != ep) { + spin_unlock_irq(&epfile->ffs->eps_lock); + return -ESHUTDOWN; + } /* * Controller may require buffer size to be aligned to * maxpacketsize of an out endpoint. @@ -752,6 +758,7 @@ static ssize_t ffs_epfile_io(struct file *file, struct ffs_io_data *io_data) data_len = io_data->read ? usb_ep_align_maybe(gadget, ep->ep, io_data->len) : io_data->len; + spin_unlock_irq(&epfile->ffs->eps_lock); data = kmalloc(data_len, GFP_KERNEL); if (unlikely(!data)) -- cgit v1.2.1 From 9ae794ac5e407d3bc3fec785db481d5a2c0fa275 Mon Sep 17 00:00:00 2001 From: David Milburn Date: Wed, 16 Apr 2014 11:43:46 -0500 Subject: ahci: do not request irq for dummy port System may crash in ahci_hw_interrupt() or ahci_thread_fn() when accessing the interrupt status in a port's private_data if the port is actually a DUMMY port. 00:1f.2 SATA controller: Intel Corporation 82801JI (ICH10 Family) SATA AHCI Controller [ 9.352080] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x1 impl SATA mode [ 9.352084] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ccc [ 9.368155] Console: switching to colour frame buffer device 128x48 [ 9.439759] mgag200 0000:11:00.0: fb0: mgadrmfb frame buffer device [ 9.446765] mgag200 0000:11:00.0: registered panic notifier [ 9.470166] scsi1 : ahci [ 9.479166] scsi2 : ahci [ 9.488172] scsi3 : ahci [ 9.497174] scsi4 : ahci [ 9.506175] scsi5 : ahci [ 9.515174] scsi6 : ahci [ 9.518181] ata1: SATA max UDMA/133 abar m2048@0x95c00000 port 0x95c00100 irq 91 [ 9.526448] ata2: DUMMY [ 9.529182] ata3: DUMMY [ 9.531916] ata4: DUMMY [ 9.534650] ata5: DUMMY [ 9.537382] ata6: DUMMY [ 9.576196] [drm] Initialized mgag200 1.0.0 20110418 for 0000:11:00.0 on minor 0 [ 9.845257] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 9.865161] ata1.00: ATAPI: Optiarc DVD RW AD-7580S, FX04, max UDMA/100 [ 9.891407] ata1.00: configured for UDMA/100 [ 9.900525] scsi 1:0:0:0: CD-ROM Optiarc DVD RW AD-7580S FX04 PQ: 0 ANSI: 5 [ 10.247399] iTCO_vendor_support: vendor-support=0 [ 10.261572] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11 [ 10.269764] iTCO_wdt: unable to reset NO_REBOOT flag, device disabled by hardware/BIOS [ 10.301932] sd 0:2:0:0: [sda] 570310656 512-byte logical blocks: (291 GB/271 GiB) [ 10.317085] sd 0:2:0:0: [sda] Write Protect is off [ 10.328326] sd 0:2:0:0: [sda] Write cache: disabled, read cache: disabled, supports DPO and FUA [ 10.375452] BUG: unable to handle kernel NULL pointer dereference at 000000000000003c [ 10.384217] IP: [] ahci_hw_interrupt+0x100/0x130 [libahci] [ 10.392101] PGD 0 [ 10.394353] Oops: 0000 [#1] SMP [ 10.397978] Modules linked in: sr_mod(+) cdrom sd_mod iTCO_wdt crc_t10dif iTCO_vendor_support crct10dif_common ahci libahci libata lpc_ich mfd_core mgag200 syscopyarea sysfillrect sysimgblt i2c_algo_bit drm_kms_helper ttm drm i2c_core megaraid_sas dm_mirror dm_region_hash dm_log dm_mod [ 10.426499] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 3.15.0-rc1 #1 [ 10.433495] Hardware name: QCI QSSC-S4R/QSSC-S4R, BIOS QSSC-S4R.QCI.01.00.S013.032920111005 03/29/2011 [ 10.443886] task: ffffffff81906460 ti: ffffffff818f0000 task.ti: ffffffff818f0000 [ 10.452239] RIP: 0010:[] [] ahci_hw_interrupt+0x100/0x130 [libahci] [ 10.462838] RSP: 0018:ffff880033c03d98 EFLAGS: 00010046 [ 10.468767] RAX: 0000000000a400a4 RBX: ffff880029a6bc18 RCX: 00000000fffffffa [ 10.476731] RDX: 00000000000000a4 RSI: ffff880029bb0000 RDI: ffff880029a6bc18 [ 10.484696] RBP: ffff880033c03dc8 R08: 0000000000000000 R09: ffff88002f800490 [ 10.492661] R10: 0000000000000000 R11: 0000000000000005 R12: 0000000000000000 [ 10.500625] R13: ffff880029a6bd98 R14: 0000000000000000 R15: ffffc90000194000 [ 10.508590] FS: 0000000000000000(0000) GS:ffff880033c00000(0000) knlGS:0000000000000000 [ 10.517623] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b [ 10.524035] CR2: 000000000000003c CR3: 00000000328ff000 CR4: 00000000000007b0 [ 10.531999] Stack: [ 10.534241] 0000000000000017 ffff880031ba7d00 000000000000005c ffff880031ba7d00 [ 10.542535] 0000000000000000 000000000000005c ffff880033c03e10 ffffffff810c2a1e [ 10.550827] ffff880031ae2900 000000008108fb4f ffff880031ae2900 ffff880031ae2984 [ 10.559121] Call Trace: [ 10.561849] [ 10.563994] [] handle_irq_event_percpu+0x3e/0x1a0 [ 10.571309] [] handle_irq_event+0x3d/0x60 [ 10.577631] [] try_one_irq.isra.6+0x8d/0xf0 [ 10.584142] [] note_interrupt+0x173/0x1f0 [ 10.590460] [] handle_irq_event_percpu+0xae/0x1a0 [ 10.597554] [] handle_irq_event+0x3d/0x60 [ 10.603872] [] handle_edge_irq+0x77/0x130 [ 10.610199] [] handle_irq+0xbf/0x150 [ 10.616040] [] ? vtime_account_idle+0xe/0x50 [ 10.622654] [] ? atomic_notifier_call_chain+0x1a/0x20 [ 10.630140] [] do_IRQ+0x4f/0xf0 [ 10.635490] [] common_interrupt+0x6d/0x6d [ 10.641805] [ 10.643950] [] ? cpuidle_enter_state+0x4f/0xc0 [ 10.650972] [] ? cpuidle_enter_state+0x48/0xc0 [ 10.657775] [] cpuidle_enter+0x17/0x20 [ 10.663807] [] cpu_startup_entry+0x2c0/0x3d0 [ 10.670423] [] rest_init+0x77/0x80 [ 10.676065] [] start_kernel+0x40f/0x41a [ 10.682190] [] ? repair_env_string+0x5c/0x5c [ 10.688799] [] ? early_idt_handlers+0x120/0x120 [ 10.695699] [] x86_64_start_reservations+0x2a/0x2c [ 10.702889] [] x86_64_start_kernel+0x143/0x152 [ 10.709689] Code: a0 fc ff 85 c0 8b 4d d4 74 c3 48 8b 7b 08 89 ca 48 c7 c6 60 66 13 a0 31 c0 e8 9d 70 28 e1 8b 4d d4 eb aa 0f 1f 84 00 00 00 00 00 <45> 8b 64 24 3c 48 89 df e8 23 47 4c e1 41 83 fc 01 19 c0 48 83 [ 10.731470] RIP [] ahci_hw_interrupt+0x100/0x130 [libahci] [ 10.739441] RSP [ 10.743333] CR2: 000000000000003c [ 10.747032] ---[ end trace b6e82636970e2690 ]--- [ 10.760190] Kernel panic - not syncing: Fatal exception in interrupt [ 10.767291] Kernel Offset: 0x0 from 0xffffffff81000000 (relocation range: 0xffffffff80000000-0xffffffff9fffffff) Cc: Alexander Gordeev Cc: Tejun Heo Cc: Signed-of-by: David Milburn Fixes: 5ca72c4f7c41 ("AHCI: Support multiple MSIs") --- drivers/ata/ahci.c | 12 ++++-------- 1 file changed, 4 insertions(+), 8 deletions(-) (limited to 'drivers') diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c index 5a0bf8ed649b..e45b18ee04c3 100644 --- a/drivers/ata/ahci.c +++ b/drivers/ata/ahci.c @@ -1232,18 +1232,14 @@ int ahci_host_activate(struct ata_host *host, int irq, unsigned int n_msis) return rc; for (i = 0; i < host->n_ports; i++) { - const char* desc; struct ahci_port_priv *pp = host->ports[i]->private_data; /* pp is NULL for dummy ports */ if (pp) - desc = pp->irq_desc; - else - desc = dev_driver_string(host->dev); - - rc = devm_request_threaded_irq(host->dev, - irq + i, ahci_hw_interrupt, ahci_thread_fn, IRQF_SHARED, - desc, host->ports[i]); + rc = devm_request_threaded_irq(host->dev, + irq + i, ahci_hw_interrupt, + ahci_thread_fn, IRQF_SHARED, + pp->irq_desc, host->ports[i]); if (rc) goto out_free_irqs; } -- cgit v1.2.1 From 8845cc6415ec28ef8d57b3fb81c75ef9bce69c5f Mon Sep 17 00:00:00 2001 From: Antti Palosaari Date: Thu, 10 Apr 2014 21:18:16 -0300 Subject: [media] fc2580: fix tuning failure on 32-bit arch There was some frequency calculation overflows which caused tuning failure on 32-bit architecture. Use 64-bit numbers where needed in order to avoid calculation overflows. Thanks for the Finnish person, who asked remain anonymous, reporting, testing and suggesting the fix. Cc: Signed-off-by: Antti Palosaari Signed-off-by: Mauro Carvalho Chehab --- drivers/media/tuners/fc2580.c | 6 +++--- drivers/media/tuners/fc2580_priv.h | 1 + 2 files changed, 4 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/media/tuners/fc2580.c b/drivers/media/tuners/fc2580.c index 3aecaf465094..f0c9c42867de 100644 --- a/drivers/media/tuners/fc2580.c +++ b/drivers/media/tuners/fc2580.c @@ -195,7 +195,7 @@ static int fc2580_set_params(struct dvb_frontend *fe) f_ref = 2UL * priv->cfg->clock / r_val; n_val = div_u64_rem(f_vco, f_ref, &k_val); - k_val_reg = 1UL * k_val * (1 << 20) / f_ref; + k_val_reg = div_u64(1ULL * k_val * (1 << 20), f_ref); ret = fc2580_wr_reg(priv, 0x18, r18_val | ((k_val_reg >> 16) & 0xff)); if (ret < 0) @@ -348,8 +348,8 @@ static int fc2580_set_params(struct dvb_frontend *fe) if (ret < 0) goto err; - ret = fc2580_wr_reg(priv, 0x37, 1UL * priv->cfg->clock * \ - fc2580_if_filter_lut[i].mul / 1000000000); + ret = fc2580_wr_reg(priv, 0x37, div_u64(1ULL * priv->cfg->clock * + fc2580_if_filter_lut[i].mul, 1000000000)); if (ret < 0) goto err; diff --git a/drivers/media/tuners/fc2580_priv.h b/drivers/media/tuners/fc2580_priv.h index be38a9e637e0..646c99452136 100644 --- a/drivers/media/tuners/fc2580_priv.h +++ b/drivers/media/tuners/fc2580_priv.h @@ -22,6 +22,7 @@ #define FC2580_PRIV_H #include "fc2580.h" +#include struct fc2580_reg_val { u8 reg; -- cgit v1.2.1 From ce965c3d2e68c5325dd5624eb101d70423022fef Mon Sep 17 00:00:00 2001 From: Thomas Petazzoni Date: Mon, 14 Apr 2014 17:29:18 +0200 Subject: memory: mvebu-devbus: fix the conversion of the bus width According to the Armada 370 and Armada XP datasheets, the part of the Device Bus register that configure the bus width should contain 0 for a 8 bits bus width, and 1 for a 16 bits bus width (other values are unsupported/reserved). However, the current conversion done in the driver to convert from a bus width in bits to the value expected by the register leads to setting the register to 1 for a 8 bits bus, and 2 for a 16 bits bus. This mistake was compensated by a mistake in the existing Device Tree files for Armada 370/XP platforms: they were declaring a 8 bits bus width, while the hardware in fact uses a 16 bits bus width. This commit fixes that by adjusting the conversion logic. This patch fixes a bug that was introduced in 3edad321b1bd2e6c8b5f38146c115c8982438f06 ('drivers: memory: Introduce Marvell EBU Device Bus driver'), which was merged in v3.11. Signed-off-by: Thomas Petazzoni Link: https://lkml.kernel.org/r/1397489361-5833-2-git-send-email-thomas.petazzoni@free-electrons.com Fixes: 3edad321b1bd ('drivers: memory: Introduce Marvell EBU Device Bus driver') Cc: stable@vger.kernel.org # v3.11+ Acked-by: Ezequiel Garcia Acked-by: Gregory CLEMENT Signed-off-by: Jason Cooper --- drivers/memory/mvebu-devbus.c | 15 +++++++++++++-- 1 file changed, 13 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/memory/mvebu-devbus.c b/drivers/memory/mvebu-devbus.c index 110c03627051..b59a17fb7c3e 100644 --- a/drivers/memory/mvebu-devbus.c +++ b/drivers/memory/mvebu-devbus.c @@ -108,8 +108,19 @@ static int devbus_set_timing_params(struct devbus *devbus, node->full_name); return err; } - /* Convert bit width to byte width */ - r.bus_width /= 8; + + /* + * The bus width is encoded into the register as 0 for 8 bits, + * and 1 for 16 bits, so we do the necessary conversion here. + */ + if (r.bus_width == 8) + r.bus_width = 0; + else if (r.bus_width == 16) + r.bus_width = 1; + else { + dev_err(devbus->dev, "invalid bus width %d\n", r.bus_width); + return -EINVAL; + } err = get_timing_param_ps(devbus, node, "devbus,badr-skew-ps", &r.badr_skew); -- cgit v1.2.1 From 06cd7a874ec6e09d151aeb1fa8600e14f1ff89f6 Mon Sep 17 00:00:00 2001 From: Sebastian Ott Date: Tue, 15 Apr 2014 20:08:01 +0200 Subject: s390/chsc: fix SEI usage on old FW levels Using a notification type mask for the store event information chsc is unsupported on some firmware levels. Retry SEI with that mask set to zero (which is the old way of requesting only channel subsystem related events). Cc: Reported-and-tested-by: Stefan Haberland Reviewed-by: Peter Oberparleiter Signed-off-by: Sebastian Ott Signed-off-by: Martin Schwidefsky --- drivers/s390/cio/chsc.c | 22 +++++++++++++++++----- 1 file changed, 17 insertions(+), 5 deletions(-) (limited to 'drivers') diff --git a/drivers/s390/cio/chsc.c b/drivers/s390/cio/chsc.c index 9f0ea6cb6922..e3bf885f4a6c 100644 --- a/drivers/s390/cio/chsc.c +++ b/drivers/s390/cio/chsc.c @@ -541,18 +541,27 @@ static void chsc_process_sei_nt0(struct chsc_sei_nt0_area *sei_area) static void chsc_process_event_information(struct chsc_sei *sei, u64 ntsm) { - do { + static int ntsm_unsupported; + + while (true) { memset(sei, 0, sizeof(*sei)); sei->request.length = 0x0010; sei->request.code = 0x000e; - sei->ntsm = ntsm; + if (!ntsm_unsupported) + sei->ntsm = ntsm; if (chsc(sei)) break; if (sei->response.code != 0x0001) { - CIO_CRW_EVENT(2, "chsc: sei failed (rc=%04x)\n", - sei->response.code); + CIO_CRW_EVENT(2, "chsc: sei failed (rc=%04x, ntsm=%llx)\n", + sei->response.code, sei->ntsm); + + if (sei->response.code == 3 && sei->ntsm) { + /* Fallback for old firmware. */ + ntsm_unsupported = 1; + continue; + } break; } @@ -568,7 +577,10 @@ static void chsc_process_event_information(struct chsc_sei *sei, u64 ntsm) CIO_CRW_EVENT(2, "chsc: unhandled nt: %d\n", sei->nt); break; } - } while (sei->u.nt0_area.flags & 0x80); + + if (!(sei->u.nt0_area.flags & 0x80)) + break; + } } /* -- cgit v1.2.1 From ab0f9e78b97f5193dd38b3757b42b6fbded05fb7 Mon Sep 17 00:00:00 2001 From: Alexander Gordeev Date: Thu, 17 Apr 2014 14:13:49 +0200 Subject: ahci: Ensure "MSI Revert to Single Message" mode is not enforced The AHCI specification allows hardware to choose to revert to single MSI mode when fewer messages are allocated than requested. Yet, at least ICH10 chipset reverts to single MSI mode even when enough messages are allocated in some cases (see below). This update forces the driver to not rely on initialization of multiple MSIs mode alone and always check if "MSI Revert to Single Message" (MRSM) mode was enforced by the controller and fallback to the single MSI mode in case it did. That prevents a situation when the driver configured multiple per-port IRQ handlers, but the controller sends all port's interrupts to a single IRQ, which could easily screw up the interrupt handling and lead to delays and possibly crashes. The fix was tested on a 6-port controller that successfully reverted to the single MSI mode: 00:1f.2 SATA controller: Intel Corporation 82801JI (ICH10 Family) SATA AHCI Controller (prog-if 01 [AHCI 1.0]) Subsystem: Super Micro Computer Inc Device 10a7 Flags: bus master, 66MHz, medium devsel, latency 0, IRQ 101 I/O ports at f110 [size=8] I/O ports at f100 [size=4] I/O ports at f0f0 [size=8] I/O ports at f0e0 [size=4] I/O ports at f020 [size=32] Memory at fbf00000 (32-bit, non-prefetchable) [size=2K] Capabilities: [80] MSI: Enable+ Count=1/16 Maskable- 64bit- Capabilities: [70] Power Management version 3 Capabilities: [a8] SATA HBA v1.0 Capabilities: [b0] PCI Advanced Features Kernel driver in use: ahci With 6 ports just 8 MSI vectors should be enough, but the adapter enforces the MRSM mode when less than 16 vectors are written to the Multiple Messages Enable PCI register. I instigated MRSM mode by forcing @nvec to 8 in ahci_init_interrupts(). Signed-off-by: Alexander Gordeev Cc: linux-ide@vger.kernel.org Cc: stable@vger.kernel.org Signed-off-by: Tejun Heo --- drivers/ata/ahci.c | 9 ++++++++- drivers/ata/ahci.h | 1 + 2 files changed, 9 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c index e45b18ee04c3..f6b3e31f63cd 100644 --- a/drivers/ata/ahci.c +++ b/drivers/ata/ahci.c @@ -1164,7 +1164,7 @@ static inline void ahci_gtf_filter_workaround(struct ata_host *host) #endif static int ahci_init_interrupts(struct pci_dev *pdev, unsigned int n_ports, - struct ahci_host_priv *hpriv) + struct ahci_host_priv *hpriv) { int nvec; @@ -1189,6 +1189,13 @@ static int ahci_init_interrupts(struct pci_dev *pdev, unsigned int n_ports, else if (nvec < 0) goto intx; + /* fallback to single MSI mode if the controller enforced MRSM mode */ + if (readl(hpriv->mmio + HOST_CTL) & HOST_MRSM) { + pci_disable_msi(pdev); + printk(KERN_INFO "ahci: MRSM is on, fallback to single MSI\n"); + goto single_msi; + } + return nvec; single_msi: diff --git a/drivers/ata/ahci.h b/drivers/ata/ahci.h index 51af275b3388..b5eb886da226 100644 --- a/drivers/ata/ahci.h +++ b/drivers/ata/ahci.h @@ -94,6 +94,7 @@ enum { /* HOST_CTL bits */ HOST_RESET = (1 << 0), /* reset controller; self-clear */ HOST_IRQ_EN = (1 << 1), /* global IRQ enable */ + HOST_MRSM = (1 << 2), /* MSI Revert to Single Message */ HOST_AHCI_EN = (1 << 31), /* AHCI enabled */ /* HOST_CAP bits */ -- cgit v1.2.1 From ccf8f53cac7d9321c9af2b14af41e703f44ac198 Mon Sep 17 00:00:00 2001 From: Alexander Gordeev Date: Thu, 17 Apr 2014 14:13:50 +0200 Subject: ahci: Use pci_enable_msi_exact() instead of pci_enable_msi_range() The driver calls pci_enable_msi_range() function with the range of [nvec..nvec] which is what pci_enable_msi_exact() function is for. Signed-off-by: Alexander Gordeev Cc: linux-ide@vger.kernel.org Signed-off-by: Tejun Heo --- drivers/ata/ahci.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c index f6b3e31f63cd..44d40c746982 100644 --- a/drivers/ata/ahci.c +++ b/drivers/ata/ahci.c @@ -1166,7 +1166,7 @@ static inline void ahci_gtf_filter_workaround(struct ata_host *host) static int ahci_init_interrupts(struct pci_dev *pdev, unsigned int n_ports, struct ahci_host_priv *hpriv) { - int nvec; + int rc, nvec; if (hpriv->flags & AHCI_HFLAG_NO_MSI) goto intx; @@ -1183,10 +1183,10 @@ static int ahci_init_interrupts(struct pci_dev *pdev, unsigned int n_ports, if (nvec < n_ports) goto single_msi; - nvec = pci_enable_msi_range(pdev, nvec, nvec); - if (nvec == -ENOSPC) + rc = pci_enable_msi_exact(pdev, nvec); + if (rc == -ENOSPC) goto single_msi; - else if (nvec < 0) + else if (rc < 0) goto intx; /* fallback to single MSI mode if the controller enforced MRSM mode */ -- cgit v1.2.1 From 252455c40316009cc791f00338ee2e367d2d2739 Mon Sep 17 00:00:00 2001 From: Suresh Gupta Date: Fri, 21 Mar 2014 16:38:12 +0530 Subject: usb: gadget: fsl driver pullup fix This fix the fsl usb gadget driver in a way that the usb device will be only "pulled up" on requests only when vbus is powered Signed-off-by: Suresh Gupta Signed-off-by: Felipe Balbi --- drivers/usb/gadget/fsl_udc_core.c | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'drivers') diff --git a/drivers/usb/gadget/fsl_udc_core.c b/drivers/usb/gadget/fsl_udc_core.c index dcd0b07ae3a0..a2f26cdb56fe 100644 --- a/drivers/usb/gadget/fsl_udc_core.c +++ b/drivers/usb/gadget/fsl_udc_core.c @@ -1219,6 +1219,10 @@ static int fsl_pullup(struct usb_gadget *gadget, int is_on) struct fsl_udc *udc; udc = container_of(gadget, struct fsl_udc, gadget); + + if (!udc->vbus_active) + return -EOPNOTSUPP; + udc->softconnect = (is_on != 0); if (can_pullup(udc)) fsl_writel((fsl_readl(&dr_regs->usbcmd) | USB_CMD_RUN_STOP), -- cgit v1.2.1 From ffde1de64012c406dfdda8690918248b472f24e4 Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Wed, 16 Apr 2014 14:36:44 +0000 Subject: irqchip: Gic: Support forced affinity setting To support the affinity setting of per cpu timers in the early startup of a not yet online cpu, implement the force logic, which disables the cpu online check. Tagged for stable to allow a simple fix of the affected SoC clock event drivers. Signed-off-by: Thomas Gleixner Tested-by: Krzysztof Kozlowski Cc: Kyungmin Park Cc: Marek Szyprowski Cc: Bartlomiej Zolnierkiewicz Cc: Tomasz Figa , Cc: Daniel Lezcano , Cc: Kukjin Kim Cc: linux-arm-kernel@lists.infradead.org, Cc: stable@vger.kernel.org Link: http://lkml.kernel.org/r/20140416143315.916984416@linutronix.de Signed-off-by: Thomas Gleixner --- drivers/irqchip/irq-gic.c | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/irqchip/irq-gic.c b/drivers/irqchip/irq-gic.c index 4300b6606f5e..57d165e026f4 100644 --- a/drivers/irqchip/irq-gic.c +++ b/drivers/irqchip/irq-gic.c @@ -246,10 +246,14 @@ static int gic_set_affinity(struct irq_data *d, const struct cpumask *mask_val, bool force) { void __iomem *reg = gic_dist_base(d) + GIC_DIST_TARGET + (gic_irq(d) & ~3); - unsigned int shift = (gic_irq(d) % 4) * 8; - unsigned int cpu = cpumask_any_and(mask_val, cpu_online_mask); + unsigned int cpu, shift = (gic_irq(d) % 4) * 8; u32 val, mask, bit; + if (!force) + cpu = cpumask_any_and(mask_val, cpu_online_mask); + else + cpu = cpumask_first(mask_val); + if (cpu >= NR_GIC_CPU_IF || cpu >= nr_cpu_ids) return -EINVAL; -- cgit v1.2.1 From 30ccf03b4a6a2102a2219058bdc6d779dc637dd7 Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Wed, 16 Apr 2014 14:36:45 +0000 Subject: clocksource: Exynos_mct: Use irq_force_affinity() in cpu bringup The starting cpu is not yet in the online mask so irq_set_affinity() fails which results in per cpu timers for this cpu ending up on some other online cpu, ususally cpu 0. Use irq_force_affinity() which disables the online mask check and makes things work. Signed-off-by: Thomas Gleixner Tested-by: Krzysztof Kozlowski Cc: Kyungmin Park Cc: Marek Szyprowski Cc: Bartlomiej Zolnierkiewicz Cc: Tomasz Figa , Cc: Daniel Lezcano , Cc: Kukjin Kim Cc: linux-arm-kernel@lists.infradead.org, Cc: stable@vger.kernel.org Link: http://lkml.kernel.org/r/20140416143316.106665251@linutronix.de Signed-off-by: Thomas Gleixner --- drivers/clocksource/exynos_mct.c | 8 +------- 1 file changed, 1 insertion(+), 7 deletions(-) (limited to 'drivers') diff --git a/drivers/clocksource/exynos_mct.c b/drivers/clocksource/exynos_mct.c index a6ee6d7cd63f..b2d416368711 100644 --- a/drivers/clocksource/exynos_mct.c +++ b/drivers/clocksource/exynos_mct.c @@ -430,6 +430,7 @@ static int exynos4_local_timer_setup(struct clock_event_device *evt) evt->irq); return -EIO; } + irq_force_affinity(mct_irqs[MCT_L0_IRQ + cpu], cpumask_of(cpu)); } else { enable_percpu_irq(mct_irqs[MCT_L0_IRQ], 0); } @@ -450,7 +451,6 @@ static int exynos4_mct_cpu_notify(struct notifier_block *self, unsigned long action, void *hcpu) { struct mct_clock_event_device *mevt; - unsigned int cpu; /* * Grab cpu pointer in each case to avoid spurious @@ -461,12 +461,6 @@ static int exynos4_mct_cpu_notify(struct notifier_block *self, mevt = this_cpu_ptr(&percpu_mct_tick); exynos4_local_timer_setup(&mevt->evt); break; - case CPU_ONLINE: - cpu = (unsigned long)hcpu; - if (mct_int_type == MCT_INT_SPI) - irq_set_affinity(mct_irqs[MCT_L0_IRQ + cpu], - cpumask_of(cpu)); - break; case CPU_DYING: mevt = this_cpu_ptr(&percpu_mct_tick); exynos4_local_timer_stop(&mevt->evt); -- cgit v1.2.1 From 8db6e5104b77de5d0b7002b95069da0992a34be9 Mon Sep 17 00:00:00 2001 From: Krzysztof Kozlowski Date: Wed, 16 Apr 2014 14:36:45 +0000 Subject: clocksource: Exynos_mct: Register clock event after request_irq() After hotplugging CPU1 the first call of interrupt handler for CPU1 oneshot timer was called on CPU0 because it fired before setting IRQ affinity. Affected are SoCs where Multi Core Timer interrupts are shared (SPI), e.g. Exynos 4210. During setup of the MCT timers the clock event device should be registered after setting the affinity for interrupt. This will prevent starting the timer too early. Signed-off-by: Krzysztof Kozlowski Signed-off-by: Thomas Gleixner Cc: Kyungmin Park Cc: Marek Szyprowski Cc: Bartlomiej Zolnierkiewicz Cc: Tomasz Figa , Cc: Daniel Lezcano , Cc: Kukjin Kim Cc: linux-arm-kernel@lists.infradead.org, Cc: stable@vger.kernel.org Link: http://lkml.kernel.org/r/20140416143316.299247848@linutronix.de Signed-off-by: Thomas Gleixner --- drivers/clocksource/exynos_mct.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/clocksource/exynos_mct.c b/drivers/clocksource/exynos_mct.c index b2d416368711..acf5a329d538 100644 --- a/drivers/clocksource/exynos_mct.c +++ b/drivers/clocksource/exynos_mct.c @@ -416,8 +416,6 @@ static int exynos4_local_timer_setup(struct clock_event_device *evt) evt->set_mode = exynos4_tick_set_mode; evt->features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT; evt->rating = 450; - clockevents_config_and_register(evt, clk_rate / (TICK_BASE_CNT + 1), - 0xf, 0x7fffffff); exynos4_mct_write(TICK_BASE_CNT, mevt->base + MCT_L_TCNTB_OFFSET); @@ -434,6 +432,8 @@ static int exynos4_local_timer_setup(struct clock_event_device *evt) } else { enable_percpu_irq(mct_irqs[MCT_L0_IRQ], 0); } + clockevents_config_and_register(evt, clk_rate / (TICK_BASE_CNT + 1), + 0xf, 0x7fffffff); return 0; } -- cgit v1.2.1 From 1676014ef974ce71a854e7f415e2bb52feb24868 Mon Sep 17 00:00:00 2001 From: Alexander Stein Date: Sun, 13 Apr 2014 12:45:10 +0200 Subject: spi: atmel: Fix scheduling while atomic bug atmel_spi_lock does a spin_lock_irqsave, so we need to renable the interrupts when we want to schedule. Signed-off-by: Alexander Stein Signed-off-by: Mark Brown --- drivers/spi/spi-atmel.c | 3 +++ 1 file changed, 3 insertions(+) (limited to 'drivers') diff --git a/drivers/spi/spi-atmel.c b/drivers/spi/spi-atmel.c index 8005f9869481..079e6b1b0cdb 100644 --- a/drivers/spi/spi-atmel.c +++ b/drivers/spi/spi-atmel.c @@ -1115,8 +1115,11 @@ static int atmel_spi_one_transfer(struct spi_master *master, atmel_spi_next_xfer_pio(master, xfer); } + /* interrupts are disabled, so free the lock for schedule */ + atmel_spi_unlock(as); ret = wait_for_completion_timeout(&as->xfer_completion, SPI_DMA_TIMEOUT); + atmel_spi_lock(as); if (WARN_ON(ret == 0)) { dev_err(&spi->dev, "spi trasfer timeout, err %d\n", ret); -- cgit v1.2.1 From 83596fbeb5d28e8cb8878786133945d4dc7c0090 Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Mon, 14 Apr 2014 19:39:53 +0200 Subject: spi: core: Ignore unsupported Dual/Quad Transfer Mode bits The availability of SPI Dual or Quad Transfer Mode as indicated by the "spi-tx-bus-width" and "spi-rx-bus-width" properties in the device tree is a hardware property of the SPI master, SPI slave, and board wiring. Hence the SPI core should not reject an SPI slave because an SPI master driver doesn't (yet) support Dual or Quad Transfer Mode. Change the lack of Dual or Quad Transfer Mode support in the SPI master driver from an error condition to a warning condition, and ignore the unsupported mode bits, falling back to Single Transfer Mode, to avoid breakages when running old kernels with new device trees. Fixes: f477b7fb13df (spi: DUAL and QUAD support) Signed-off-by: Geert Uytterhoeven Signed-off-by: Mark Brown Cc: stable@vger.kernel.org --- drivers/spi/spi.c | 11 ++++++++++- 1 file changed, 10 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/spi/spi.c b/drivers/spi/spi.c index 4eb9bf02996c..1534fa1dac34 100644 --- a/drivers/spi/spi.c +++ b/drivers/spi/spi.c @@ -1756,7 +1756,7 @@ EXPORT_SYMBOL_GPL(spi_busnum_to_master); */ int spi_setup(struct spi_device *spi) { - unsigned bad_bits; + unsigned bad_bits, ugly_bits; int status = 0; /* check mode to prevent that DUAL and QUAD set at the same time @@ -1776,6 +1776,15 @@ int spi_setup(struct spi_device *spi) * that aren't supported with their current master */ bad_bits = spi->mode & ~spi->master->mode_bits; + ugly_bits = bad_bits & + (SPI_TX_DUAL | SPI_TX_QUAD | SPI_RX_DUAL | SPI_RX_QUAD); + if (ugly_bits) { + dev_warn(&spi->dev, + "setup: ignoring unsupported mode bits %x\n", + ugly_bits); + spi->mode &= ~ugly_bits; + bad_bits &= ~ugly_bits; + } if (bad_bits) { dev_err(&spi->dev, "setup: unsupported mode bits %x\n", bad_bits); -- cgit v1.2.1 From 2cf532f5e67c0cfe38c8c100e49280cdadacd2be Mon Sep 17 00:00:00 2001 From: Alexander Gordeev Date: Thu, 17 Apr 2014 18:06:15 +0200 Subject: ahci: Do not receive interrupts sent by dummy ports In multiple MSI mode all AHCI ports (including dummy) get assigned separate MSI vectors and (as result of execution pci_enable_msi_exact() function) separate IRQ numbers, (mapped to the MSI vectors). Therefore, although interrupts from dummy ports are not desired they are still enabled. We do not request IRQs for dummy ports, but that only means we do not assign AHCI-specific ISRs to corresponding IRQ numbers. As result, dummy port interrupts still could come and traverse all the way from the PCI device to the kernel, causing unnecessary overhead. This update disables IRQs for dummy ports and prevents the described issue. Signed-off-by: Alexander Gordeev Signed-off-by: Tejun Heo Tested-by: David Milburn Cc: linux-ide@vger.kernel.org Cc: stable@vger.kernel.org Fixes: 5ca72c4f7c41 ("AHCI: Support multiple MSIs") --- drivers/ata/ahci.c | 16 ++++++++++------ 1 file changed, 10 insertions(+), 6 deletions(-) (limited to 'drivers') diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c index 44d40c746982..71e15b73513d 100644 --- a/drivers/ata/ahci.c +++ b/drivers/ata/ahci.c @@ -1241,12 +1241,16 @@ int ahci_host_activate(struct ata_host *host, int irq, unsigned int n_msis) for (i = 0; i < host->n_ports; i++) { struct ahci_port_priv *pp = host->ports[i]->private_data; - /* pp is NULL for dummy ports */ - if (pp) - rc = devm_request_threaded_irq(host->dev, - irq + i, ahci_hw_interrupt, - ahci_thread_fn, IRQF_SHARED, - pp->irq_desc, host->ports[i]); + /* Do not receive interrupts sent by dummy ports */ + if (!pp) { + disable_irq(irq + i); + continue; + } + + rc = devm_request_threaded_irq(host->dev, irq + i, + ahci_hw_interrupt, + ahci_thread_fn, IRQF_SHARED, + pp->irq_desc, host->ports[i]); if (rc) goto out_free_irqs; } -- cgit v1.2.1 From 8a4aeec8d2d6a3edeffbdfae451cdf05cbf0fefd Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Thu, 17 Apr 2014 11:48:21 -0700 Subject: libata/ahci: accommodate tag ordered controllers The AHCI spec allows implementations to issue commands in tag order rather than FIFO order: 5.3.2.12 P:SelectCmd HBA sets pSlotLoc = (pSlotLoc + 1) mod (CAP.NCS + 1) or HBA selects the command to issue that has had the PxCI bit set to '1' longer than any other command pending to be issued. The result is that commands posted sequentially (time-wise) may play out of sequence when issued by hardware. This behavior has likely been hidden by drives that arrange for commands to complete in issue order. However, it appears recent drives (two from different vendors that we have found so far) inflict out-of-order completions as a matter of course. So, we need to take care to maintain ordered submission, otherwise we risk triggering a drive to fall out of sequential-io automation and back to random-io processing, which incurs large latency and degrades throughput. This issue was found in simple benchmarks where QD=2 seq-write performance was 30-50% *greater* than QD=32 seq-write performance. Tagging for -stable and making the change globally since it has a low risk-to-reward ratio. Also, word is that recent versions of an unnamed OS also does it this way now. So, drives in the field are already experienced with this tag ordering scheme. Cc: Cc: Dave Jiang Cc: Ed Ciechanowski Reviewed-by: Matthew Wilcox Signed-off-by: Dan Williams Signed-off-by: Tejun Heo --- drivers/ata/libata-core.c | 21 +++++++++++++-------- 1 file changed, 13 insertions(+), 8 deletions(-) (limited to 'drivers') diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c index f2a6020366e1..73c5d0410d47 100644 --- a/drivers/ata/libata-core.c +++ b/drivers/ata/libata-core.c @@ -4794,21 +4794,26 @@ void swap_buf_le16(u16 *buf, unsigned int buf_words) static struct ata_queued_cmd *ata_qc_new(struct ata_port *ap) { struct ata_queued_cmd *qc = NULL; - unsigned int i; + unsigned int i, tag; /* no command while frozen */ if (unlikely(ap->pflags & ATA_PFLAG_FROZEN)) return NULL; - /* the last tag is reserved for internal command. */ - for (i = 0; i < ATA_MAX_QUEUE - 1; i++) - if (!test_and_set_bit(i, &ap->qc_allocated)) { - qc = __ata_qc_from_tag(ap, i); + for (i = 0; i < ATA_MAX_QUEUE; i++) { + tag = (i + ap->last_tag + 1) % ATA_MAX_QUEUE; + + /* the last tag is reserved for internal command. */ + if (tag == ATA_TAG_INTERNAL) + continue; + + if (!test_and_set_bit(tag, &ap->qc_allocated)) { + qc = __ata_qc_from_tag(ap, tag); + qc->tag = tag; + ap->last_tag = tag; break; } - - if (qc) - qc->tag = i; + } return qc; } -- cgit v1.2.1 From dd225bc675bc16972cc11f73fa0dc3ccb1ed9da1 Mon Sep 17 00:00:00 2001 From: Francois Romieu Date: Sun, 30 Mar 2014 03:14:48 +0000 Subject: i40e: remove open-coded skb_cow_head Signed-off-by: Francois Romieu Cc: Jesse Brandeburg Tested-by: Kavindya Deegala Signed-off-by: Jeff Kirsher --- drivers/net/ethernet/intel/i40e/i40e_txrx.c | 18 +++++++++--------- 1 file changed, 9 insertions(+), 9 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/intel/i40e/i40e_txrx.c b/drivers/net/ethernet/intel/i40e/i40e_txrx.c index 0f5d96ad281d..1fdc8e977147 100644 --- a/drivers/net/ethernet/intel/i40e/i40e_txrx.c +++ b/drivers/net/ethernet/intel/i40e/i40e_txrx.c @@ -1713,9 +1713,11 @@ static int i40e_tx_prepare_vlan_flags(struct sk_buff *skb, I40E_TX_FLAGS_VLAN_PRIO_SHIFT; if (tx_flags & I40E_TX_FLAGS_SW_VLAN) { struct vlan_ethhdr *vhdr; - if (skb_header_cloned(skb) && - pskb_expand_head(skb, 0, 0, GFP_ATOMIC)) - return -ENOMEM; + int rc; + + rc = skb_cow_head(skb, 0); + if (rc < 0) + return rc; vhdr = (struct vlan_ethhdr *)skb->data; vhdr->h_vlan_TCI = htons(tx_flags >> I40E_TX_FLAGS_VLAN_SHIFT); @@ -1743,20 +1745,18 @@ static int i40e_tso(struct i40e_ring *tx_ring, struct sk_buff *skb, u64 *cd_type_cmd_tso_mss, u32 *cd_tunneling) { u32 cd_cmd, cd_tso_len, cd_mss; + struct ipv6hdr *ipv6h; struct tcphdr *tcph; struct iphdr *iph; u32 l4len; int err; - struct ipv6hdr *ipv6h; if (!skb_is_gso(skb)) return 0; - if (skb_header_cloned(skb)) { - err = pskb_expand_head(skb, 0, 0, GFP_ATOMIC); - if (err) - return err; - } + err = skb_cow_head(skb, 0); + if (err < 0) + return err; if (protocol == htons(ETH_P_IP)) { iph = skb->encapsulation ? inner_ip_hdr(skb) : ip_hdr(skb); -- cgit v1.2.1 From 059dab69652da3525d320d77ac5422ec708ced14 Mon Sep 17 00:00:00 2001 From: Jesse Brandeburg Date: Tue, 1 Apr 2014 09:07:20 +0000 Subject: i40e: fix TCP flag replication for hardware offload As reported by Eric Dumazet, the i40e driver was allowing the hardware to replicate the PSH flag on all segments of a TSO operation. This patch fixes the first/middle/last TCP flags settings which makes the TSO operations work correctly. With this change we are now configuring the CWR bit to only be set in the first packet of a TSO, so this patch also enables TSO_ECN, in order to advertise to the stack that we do the right thing on the wire. Reported-by: Eric Dumazet Signed-off-by: Jesse Brandeburg Tested-by: Kavindya Deegala Signed-off-by: Jeff Kirsher --- drivers/net/ethernet/intel/i40e/i40e_main.c | 9 +++++++++ 1 file changed, 9 insertions(+) (limited to 'drivers') diff --git a/drivers/net/ethernet/intel/i40e/i40e_main.c b/drivers/net/ethernet/intel/i40e/i40e_main.c index 861b722c2672..59eada31e211 100644 --- a/drivers/net/ethernet/intel/i40e/i40e_main.c +++ b/drivers/net/ethernet/intel/i40e/i40e_main.c @@ -4271,6 +4271,14 @@ static int i40e_open(struct net_device *netdev) if (err) return err; + /* configure global TSO hardware offload settings */ + wr32(&pf->hw, I40E_GLLAN_TSOMSK_F, be32_to_cpu(TCP_FLAG_PSH | + TCP_FLAG_FIN) >> 16); + wr32(&pf->hw, I40E_GLLAN_TSOMSK_M, be32_to_cpu(TCP_FLAG_PSH | + TCP_FLAG_FIN | + TCP_FLAG_CWR) >> 16); + wr32(&pf->hw, I40E_GLLAN_TSOMSK_L, be32_to_cpu(TCP_FLAG_CWR) >> 16); + #ifdef CONFIG_I40E_VXLAN vxlan_get_rx_port(netdev); #endif @@ -6712,6 +6720,7 @@ static int i40e_config_netdev(struct i40e_vsi *vsi) NETIF_F_HW_VLAN_CTAG_FILTER | NETIF_F_IPV6_CSUM | NETIF_F_TSO | + NETIF_F_TSO_ECN | NETIF_F_TSO6 | NETIF_F_RXCSUM | NETIF_F_NTUPLE | -- cgit v1.2.1 From c751a3d58cf2dae89ec941a259025b0175d67b0c Mon Sep 17 00:00:00 2001 From: Vlad Yasevich Date: Sat, 5 Apr 2014 06:25:26 +0000 Subject: e1000e: Correctly include VLAN_HLEN when changing interface MTU When changing the interface mtu, the driver starts with a value that doesn't include VLAN_HLEN. Later tests in the driver set the rx_buffer_len based on the mtu. As a result, when the user increases the mtu to 1504 (to support 802.1AD for example), the driver rx_buffer_len does not change and frames longer the 1522 bytes are rejected as too long. Include VLAN_HLEN from the start so that an user mtu greater then 1500 bytes is correctly reflected in the driver rx_buffer_len. CC: e1000-devel@lists.sourceforge.net Signed-off-by: Vlad Yasevich Tested-by: Aaron Brown Signed-off-by: Jeff Kirsher --- drivers/net/ethernet/intel/e1000e/netdev.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/intel/e1000e/netdev.c b/drivers/net/ethernet/intel/e1000e/netdev.c index d50c91e50528..165f7bcd66ae 100644 --- a/drivers/net/ethernet/intel/e1000e/netdev.c +++ b/drivers/net/ethernet/intel/e1000e/netdev.c @@ -5687,7 +5687,7 @@ struct rtnl_link_stats64 *e1000e_get_stats64(struct net_device *netdev, static int e1000_change_mtu(struct net_device *netdev, int new_mtu) { struct e1000_adapter *adapter = netdev_priv(netdev); - int max_frame = new_mtu + ETH_HLEN + ETH_FCS_LEN; + int max_frame = new_mtu + VLAN_HLEN + ETH_HLEN + ETH_FCS_LEN; /* Jumbo frame support */ if ((max_frame > ETH_FRAME_LEN + ETH_FCS_LEN) && -- cgit v1.2.1 From 3e7986f67c0e444b2419f25c48815e17ebbab836 Mon Sep 17 00:00:00 2001 From: Hiroaki SHIMODA Date: Tue, 15 Apr 2014 08:20:19 +0000 Subject: e1000e: Enclose e1000e_pm_thaw() with CONFIG_PM_SLEEP MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Fix following compilation warning: drivers/net/ethernet/intel/e1000e/netdev.c:6238:12: warning ‘e1000e_pm_thaw’ defined but not used [-Wunused-function] static int e1000e_pm_thaw(struct device *dev) ^ Signed-off-by: Hiroaki SHIMODA Tested-by: Aaron Brown Signed-off-by: Jeff Kirsher --- drivers/net/ethernet/intel/e1000e/netdev.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/intel/e1000e/netdev.c b/drivers/net/ethernet/intel/e1000e/netdev.c index 165f7bcd66ae..8926a13ae323 100644 --- a/drivers/net/ethernet/intel/e1000e/netdev.c +++ b/drivers/net/ethernet/intel/e1000e/netdev.c @@ -6235,6 +6235,7 @@ static int __e1000_resume(struct pci_dev *pdev) return 0; } +#ifdef CONFIG_PM_SLEEP static int e1000e_pm_thaw(struct device *dev) { struct net_device *netdev = pci_get_drvdata(to_pci_dev(dev)); @@ -6255,7 +6256,6 @@ static int e1000e_pm_thaw(struct device *dev) return 0; } -#ifdef CONFIG_PM_SLEEP static int e1000e_pm_suspend(struct device *dev) { struct pci_dev *pdev = to_pci_dev(dev); -- cgit v1.2.1 From e66c083aab32842f225bae2a2c30744bf96abaec Mon Sep 17 00:00:00 2001 From: Todd Fujinaka Date: Tue, 8 Apr 2014 05:36:15 +0000 Subject: igb: fix stats for i210 rx_fifo_errors RQDPC on i210/i211 is R/W not ReadClear. Clear after reading. Signed-off-by: Todd Fujinaka Tested-by: Aaron Brown Signed-off-by: Jeff Kirsher --- drivers/net/ethernet/intel/igb/igb_main.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/intel/igb/igb_main.c b/drivers/net/ethernet/intel/igb/igb_main.c index fb98d4602f9d..16430a8440fa 100644 --- a/drivers/net/ethernet/intel/igb/igb_main.c +++ b/drivers/net/ethernet/intel/igb/igb_main.c @@ -5193,8 +5193,10 @@ void igb_update_stats(struct igb_adapter *adapter, rcu_read_lock(); for (i = 0; i < adapter->num_rx_queues; i++) { - u32 rqdpc = rd32(E1000_RQDPC(i)); struct igb_ring *ring = adapter->rx_ring[i]; + u32 rqdpc = rd32(E1000_RQDPC(i)); + if (hw->mac.type >= e1000_i210) + wr32(E1000_RQDPC(i), 0); if (rqdpc) { ring->rx_stats.drops += rqdpc; -- cgit v1.2.1 From eda183c21a444aef5800cef98d63d62914d2a81a Mon Sep 17 00:00:00 2001 From: Jakub Kicinski Date: Wed, 2 Apr 2014 10:33:28 +0000 Subject: ixgbe: clean up Rx time stamping code Time stamping resources are per-interface so there is no need to keep separate last_rx_timestamp for each Rx ring, move last_rx_timestamp to the adapter structure. With last_rx_timestamp inside adapter, ixgbe_ptp_rx_hwtstamp() inline function is reduced to a single if statement so it is no longer necessary. If statement is placed directly in ixgbe_process_skb_fields() fixing likely/unlikely marking. Checks for q_vector or adapter to be NULL are superfluous. Comment about taking I/O hit is a leftover from previous design. Signed-off-by: Jakub Kicinski Tested-by: Phil Schmitt Signed-off-by: Jeff Kirsher --- drivers/net/ethernet/intel/ixgbe/ixgbe.h | 21 ++-------------- drivers/net/ethernet/intel/ixgbe/ixgbe_main.c | 3 ++- drivers/net/ethernet/intel/ixgbe/ixgbe_ptp.c | 36 ++++++++------------------- 3 files changed, 15 insertions(+), 45 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe.h b/drivers/net/ethernet/intel/ixgbe/ixgbe.h index 1a12c1dd7a27..c6c4ca7d68e6 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe.h +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe.h @@ -256,7 +256,6 @@ struct ixgbe_ring { struct ixgbe_tx_buffer *tx_buffer_info; struct ixgbe_rx_buffer *rx_buffer_info; }; - unsigned long last_rx_timestamp; unsigned long state; u8 __iomem *tail; dma_addr_t dma; /* phys. address of descriptor ring */ @@ -770,6 +769,7 @@ struct ixgbe_adapter { unsigned long ptp_tx_start; unsigned long last_overflow_check; unsigned long last_rx_ptp_check; + unsigned long last_rx_timestamp; spinlock_t tmreg_lock; struct cyclecounter cc; struct timecounter tc; @@ -944,24 +944,7 @@ void ixgbe_ptp_init(struct ixgbe_adapter *adapter); void ixgbe_ptp_stop(struct ixgbe_adapter *adapter); void ixgbe_ptp_overflow_check(struct ixgbe_adapter *adapter); void ixgbe_ptp_rx_hang(struct ixgbe_adapter *adapter); -void __ixgbe_ptp_rx_hwtstamp(struct ixgbe_q_vector *q_vector, - struct sk_buff *skb); -static inline void ixgbe_ptp_rx_hwtstamp(struct ixgbe_ring *rx_ring, - union ixgbe_adv_rx_desc *rx_desc, - struct sk_buff *skb) -{ - if (unlikely(!ixgbe_test_staterr(rx_desc, IXGBE_RXDADV_STAT_TS))) - return; - - __ixgbe_ptp_rx_hwtstamp(rx_ring->q_vector, skb); - - /* - * Update the last_rx_timestamp timer in order to enable watchdog check - * for error case of latched timestamp on a dropped packet. - */ - rx_ring->last_rx_timestamp = jiffies; -} - +void ixgbe_ptp_rx_hwtstamp(struct ixgbe_adapter *adapter, struct sk_buff *skb); int ixgbe_ptp_set_ts_config(struct ixgbe_adapter *adapter, struct ifreq *ifr); int ixgbe_ptp_get_ts_config(struct ixgbe_adapter *adapter, struct ifreq *ifr); void ixgbe_ptp_start_cyclecounter(struct ixgbe_adapter *adapter); diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c index c4c526b7f99f..d62e7a25cf97 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c @@ -1664,7 +1664,8 @@ static void ixgbe_process_skb_fields(struct ixgbe_ring *rx_ring, ixgbe_rx_checksum(rx_ring, rx_desc, skb); - ixgbe_ptp_rx_hwtstamp(rx_ring, rx_desc, skb); + if (unlikely(ixgbe_test_staterr(rx_desc, IXGBE_RXDADV_STAT_TS))) + ixgbe_ptp_rx_hwtstamp(rx_ring->q_vector->adapter, skb); if ((dev->features & NETIF_F_HW_VLAN_CTAG_RX) && ixgbe_test_staterr(rx_desc, IXGBE_RXD_STAT_VP)) { diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_ptp.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_ptp.c index 63515a6f67fa..c247a225a3e0 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe_ptp.c +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_ptp.c @@ -435,10 +435,8 @@ void ixgbe_ptp_overflow_check(struct ixgbe_adapter *adapter) void ixgbe_ptp_rx_hang(struct ixgbe_adapter *adapter) { struct ixgbe_hw *hw = &adapter->hw; - struct ixgbe_ring *rx_ring; u32 tsyncrxctl = IXGBE_READ_REG(hw, IXGBE_TSYNCRXCTL); unsigned long rx_event; - int n; /* if we don't have a valid timestamp in the registers, just update the * timeout counter and exit @@ -450,11 +448,8 @@ void ixgbe_ptp_rx_hang(struct ixgbe_adapter *adapter) /* determine the most recent watchdog or rx_timestamp event */ rx_event = adapter->last_rx_ptp_check; - for (n = 0; n < adapter->num_rx_queues; n++) { - rx_ring = adapter->rx_ring[n]; - if (time_after(rx_ring->last_rx_timestamp, rx_event)) - rx_event = rx_ring->last_rx_timestamp; - } + if (time_after(adapter->last_rx_timestamp, rx_event)) + rx_event = adapter->last_rx_timestamp; /* only need to read the high RXSTMP register to clear the lock */ if (time_is_before_jiffies(rx_event + 5*HZ)) { @@ -530,35 +525,22 @@ static void ixgbe_ptp_tx_hwtstamp_work(struct work_struct *work) } /** - * __ixgbe_ptp_rx_hwtstamp - utility function which checks for RX time stamp - * @q_vector: structure containing interrupt and ring information + * ixgbe_ptp_rx_hwtstamp - utility function which checks for RX time stamp + * @adapter: pointer to adapter struct * @skb: particular skb to send timestamp with * * if the timestamp is valid, we convert it into the timecounter ns * value, then store that result into the shhwtstamps structure which * is passed up the network stack */ -void __ixgbe_ptp_rx_hwtstamp(struct ixgbe_q_vector *q_vector, - struct sk_buff *skb) +void ixgbe_ptp_rx_hwtstamp(struct ixgbe_adapter *adapter, struct sk_buff *skb) { - struct ixgbe_adapter *adapter; - struct ixgbe_hw *hw; + struct ixgbe_hw *hw = &adapter->hw; struct skb_shared_hwtstamps *shhwtstamps; u64 regval = 0, ns; u32 tsyncrxctl; unsigned long flags; - /* we cannot process timestamps on a ring without a q_vector */ - if (!q_vector || !q_vector->adapter) - return; - - adapter = q_vector->adapter; - hw = &adapter->hw; - - /* - * Read the tsyncrxctl register afterwards in order to prevent taking an - * I/O hit on every packet. - */ tsyncrxctl = IXGBE_READ_REG(hw, IXGBE_TSYNCRXCTL); if (!(tsyncrxctl & IXGBE_TSYNCRXCTL_VALID)) return; @@ -566,13 +548,17 @@ void __ixgbe_ptp_rx_hwtstamp(struct ixgbe_q_vector *q_vector, regval |= (u64)IXGBE_READ_REG(hw, IXGBE_RXSTMPL); regval |= (u64)IXGBE_READ_REG(hw, IXGBE_RXSTMPH) << 32; - spin_lock_irqsave(&adapter->tmreg_lock, flags); ns = timecounter_cyc2time(&adapter->tc, regval); spin_unlock_irqrestore(&adapter->tmreg_lock, flags); shhwtstamps = skb_hwtstamps(skb); shhwtstamps->hwtstamp = ns_to_ktime(ns); + + /* Update the last_rx_timestamp timer in order to enable watchdog check + * for error case of latched timestamp on a dropped packet. + */ + adapter->last_rx_timestamp = jiffies; } int ixgbe_ptp_get_ts_config(struct ixgbe_adapter *adapter, struct ifreq *ifr) -- cgit v1.2.1 From c5ffe7e1f745984b37b8ffe03b03f3d716a072f3 Mon Sep 17 00:00:00 2001 From: Jakub Kicinski Date: Wed, 2 Apr 2014 10:33:22 +0000 Subject: e1000e/igb/ixgbe/i40e: fix message terminations Add \n at the end of messages where missing, remove all \r. Reported-by: Joe Perches Signed-off-by: Jakub Kicinski Tested-by: Aaron Brown Tested-by: Phil Schmitt Tested-by: Kavindya Deegala Signed-off-by: Jeff Kirsher --- drivers/net/ethernet/intel/e1000e/netdev.c | 2 +- drivers/net/ethernet/intel/i40e/i40e_nvm.c | 2 +- drivers/net/ethernet/intel/i40e/i40e_ptp.c | 4 ++-- drivers/net/ethernet/intel/i40e/i40e_txrx.c | 4 ++-- drivers/net/ethernet/intel/igb/e1000_i210.c | 2 +- drivers/net/ethernet/intel/igb/e1000_mac.c | 13 ++++++------- drivers/net/ethernet/intel/igb/igb_ptp.c | 4 ++-- drivers/net/ethernet/intel/ixgbe/ixgbe_common.c | 2 +- drivers/net/ethernet/intel/ixgbe/ixgbe_phy.c | 6 +++--- drivers/net/ethernet/intel/ixgbe/ixgbe_ptp.c | 4 ++-- 10 files changed, 21 insertions(+), 22 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/intel/e1000e/netdev.c b/drivers/net/ethernet/intel/e1000e/netdev.c index 8926a13ae323..3e69386add04 100644 --- a/drivers/net/ethernet/intel/e1000e/netdev.c +++ b/drivers/net/ethernet/intel/e1000e/netdev.c @@ -1165,7 +1165,7 @@ static void e1000e_tx_hwtstamp_work(struct work_struct *work) dev_kfree_skb_any(adapter->tx_hwtstamp_skb); adapter->tx_hwtstamp_skb = NULL; adapter->tx_hwtstamp_timeouts++; - e_warn("clearing Tx timestamp hang"); + e_warn("clearing Tx timestamp hang\n"); } else { /* reschedule to check later */ schedule_work(&adapter->tx_hwtstamp_work); diff --git a/drivers/net/ethernet/intel/i40e/i40e_nvm.c b/drivers/net/ethernet/intel/i40e/i40e_nvm.c index 262bdf11d221..81299189a47d 100644 --- a/drivers/net/ethernet/intel/i40e/i40e_nvm.c +++ b/drivers/net/ethernet/intel/i40e/i40e_nvm.c @@ -160,7 +160,7 @@ static i40e_status i40e_poll_sr_srctl_done_bit(struct i40e_hw *hw) udelay(5); } if (ret_code == I40E_ERR_TIMEOUT) - hw_dbg(hw, "Done bit in GLNVM_SRCTL not set"); + hw_dbg(hw, "Done bit in GLNVM_SRCTL not set\n"); return ret_code; } diff --git a/drivers/net/ethernet/intel/i40e/i40e_ptp.c b/drivers/net/ethernet/intel/i40e/i40e_ptp.c index e33ec6c842b7..e61e63720800 100644 --- a/drivers/net/ethernet/intel/i40e/i40e_ptp.c +++ b/drivers/net/ethernet/intel/i40e/i40e_ptp.c @@ -239,7 +239,7 @@ static void i40e_ptp_tx_work(struct work_struct *work) dev_kfree_skb_any(pf->ptp_tx_skb); pf->ptp_tx_skb = NULL; pf->tx_hwtstamp_timeouts++; - dev_warn(&pf->pdev->dev, "clearing Tx timestamp hang"); + dev_warn(&pf->pdev->dev, "clearing Tx timestamp hang\n"); return; } @@ -321,7 +321,7 @@ void i40e_ptp_rx_hang(struct i40e_vsi *vsi) pf->last_rx_ptp_check = jiffies; pf->rx_hwtstamp_cleared++; dev_warn(&vsi->back->pdev->dev, - "%s: clearing Rx timestamp hang", + "%s: clearing Rx timestamp hang\n", __func__); } } diff --git a/drivers/net/ethernet/intel/i40e/i40e_txrx.c b/drivers/net/ethernet/intel/i40e/i40e_txrx.c index 1fdc8e977147..9478ddc66caf 100644 --- a/drivers/net/ethernet/intel/i40e/i40e_txrx.c +++ b/drivers/net/ethernet/intel/i40e/i40e_txrx.c @@ -418,7 +418,7 @@ int i40e_add_del_fdir(struct i40e_vsi *vsi, } break; default: - dev_info(&pf->pdev->dev, "Could not specify spec type %d", + dev_info(&pf->pdev->dev, "Could not specify spec type %d\n", input->flow_type); ret = -EINVAL; } @@ -478,7 +478,7 @@ static void i40e_fd_handle_status(struct i40e_ring *rx_ring, pf->flags |= I40E_FLAG_FDIR_REQUIRES_REINIT; } } else { - dev_info(&pdev->dev, "FD filter programming error"); + dev_info(&pdev->dev, "FD filter programming error\n"); } } else if (error == (0x1 << I40E_RX_PROG_STATUS_DESC_NO_FD_ENTRY_SHIFT)) { diff --git a/drivers/net/ethernet/intel/igb/e1000_i210.c b/drivers/net/ethernet/intel/igb/e1000_i210.c index db963397cc27..f67f8a170b90 100644 --- a/drivers/net/ethernet/intel/igb/e1000_i210.c +++ b/drivers/net/ethernet/intel/igb/e1000_i210.c @@ -365,7 +365,7 @@ static s32 igb_read_invm_word_i210(struct e1000_hw *hw, u8 address, u16 *data) word_address = INVM_DWORD_TO_WORD_ADDRESS(invm_dword); if (word_address == address) { *data = INVM_DWORD_TO_WORD_DATA(invm_dword); - hw_dbg("Read INVM Word 0x%02x = %x", + hw_dbg("Read INVM Word 0x%02x = %x\n", address, *data); status = E1000_SUCCESS; break; diff --git a/drivers/net/ethernet/intel/igb/e1000_mac.c b/drivers/net/ethernet/intel/igb/e1000_mac.c index 5910a932ea7c..1e0c404db81a 100644 --- a/drivers/net/ethernet/intel/igb/e1000_mac.c +++ b/drivers/net/ethernet/intel/igb/e1000_mac.c @@ -929,11 +929,10 @@ s32 igb_config_fc_after_link_up(struct e1000_hw *hw) */ if (hw->fc.requested_mode == e1000_fc_full) { hw->fc.current_mode = e1000_fc_full; - hw_dbg("Flow Control = FULL.\r\n"); + hw_dbg("Flow Control = FULL.\n"); } else { hw->fc.current_mode = e1000_fc_rx_pause; - hw_dbg("Flow Control = " - "RX PAUSE frames only.\r\n"); + hw_dbg("Flow Control = RX PAUSE frames only.\n"); } } /* For receiving PAUSE frames ONLY. @@ -948,7 +947,7 @@ s32 igb_config_fc_after_link_up(struct e1000_hw *hw) (mii_nway_lp_ability_reg & NWAY_LPAR_PAUSE) && (mii_nway_lp_ability_reg & NWAY_LPAR_ASM_DIR)) { hw->fc.current_mode = e1000_fc_tx_pause; - hw_dbg("Flow Control = TX PAUSE frames only.\r\n"); + hw_dbg("Flow Control = TX PAUSE frames only.\n"); } /* For transmitting PAUSE frames ONLY. * @@ -962,7 +961,7 @@ s32 igb_config_fc_after_link_up(struct e1000_hw *hw) !(mii_nway_lp_ability_reg & NWAY_LPAR_PAUSE) && (mii_nway_lp_ability_reg & NWAY_LPAR_ASM_DIR)) { hw->fc.current_mode = e1000_fc_rx_pause; - hw_dbg("Flow Control = RX PAUSE frames only.\r\n"); + hw_dbg("Flow Control = RX PAUSE frames only.\n"); } /* Per the IEEE spec, at this point flow control should be * disabled. However, we want to consider that we could @@ -988,10 +987,10 @@ s32 igb_config_fc_after_link_up(struct e1000_hw *hw) (hw->fc.requested_mode == e1000_fc_tx_pause) || (hw->fc.strict_ieee)) { hw->fc.current_mode = e1000_fc_none; - hw_dbg("Flow Control = NONE.\r\n"); + hw_dbg("Flow Control = NONE.\n"); } else { hw->fc.current_mode = e1000_fc_rx_pause; - hw_dbg("Flow Control = RX PAUSE frames only.\r\n"); + hw_dbg("Flow Control = RX PAUSE frames only.\n"); } /* Now we need to do one last check... If we auto- diff --git a/drivers/net/ethernet/intel/igb/igb_ptp.c b/drivers/net/ethernet/intel/igb/igb_ptp.c index 9209d652e1c9..ab25e49365f7 100644 --- a/drivers/net/ethernet/intel/igb/igb_ptp.c +++ b/drivers/net/ethernet/intel/igb/igb_ptp.c @@ -389,7 +389,7 @@ static void igb_ptp_tx_work(struct work_struct *work) adapter->ptp_tx_skb = NULL; clear_bit_unlock(__IGB_PTP_TX_IN_PROGRESS, &adapter->state); adapter->tx_hwtstamp_timeouts++; - dev_warn(&adapter->pdev->dev, "clearing Tx timestamp hang"); + dev_warn(&adapter->pdev->dev, "clearing Tx timestamp hang\n"); return; } @@ -451,7 +451,7 @@ void igb_ptp_rx_hang(struct igb_adapter *adapter) rd32(E1000_RXSTMPH); adapter->last_rx_ptp_check = jiffies; adapter->rx_hwtstamp_cleared++; - dev_warn(&adapter->pdev->dev, "clearing Rx timestamp hang"); + dev_warn(&adapter->pdev->dev, "clearing Rx timestamp hang\n"); } } diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_common.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_common.c index 24fba39e194e..981b8a7b100d 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe_common.c +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_common.c @@ -1195,7 +1195,7 @@ static s32 ixgbe_detect_eeprom_page_size_generic(struct ixgbe_hw *hw, */ hw->eeprom.word_page_size = IXGBE_EEPROM_PAGE_SIZE_MAX - data[0]; - hw_dbg(hw, "Detected EEPROM page size = %d words.", + hw_dbg(hw, "Detected EEPROM page size = %d words.\n", hw->eeprom.word_page_size); out: return status; diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_phy.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_phy.c index 23f765263f12..a76af8e28a04 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe_phy.c +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_phy.c @@ -536,7 +536,7 @@ s32 ixgbe_setup_phy_link_generic(struct ixgbe_hw *hw) if (time_out == max_time_out) { status = IXGBE_ERR_LINK_SETUP; - hw_dbg(hw, "ixgbe_setup_phy_link_generic: time out"); + hw_dbg(hw, "ixgbe_setup_phy_link_generic: time out\n"); } return status; @@ -745,7 +745,7 @@ s32 ixgbe_setup_phy_link_tnx(struct ixgbe_hw *hw) if (time_out == max_time_out) { status = IXGBE_ERR_LINK_SETUP; - hw_dbg(hw, "ixgbe_setup_phy_link_tnx: time out"); + hw_dbg(hw, "ixgbe_setup_phy_link_tnx: time out\n"); } return status; @@ -1175,7 +1175,7 @@ s32 ixgbe_identify_sfp_module_generic(struct ixgbe_hw *hw) status = 0; } else { if (hw->allow_unsupported_sfp) { - e_warn(drv, "WARNING: Intel (R) Network Connections are quality tested using Intel (R) Ethernet Optics. Using untested modules is not supported and may cause unstable operation or damage to the module or the adapter. Intel Corporation is not responsible for any harm caused by using untested modules."); + e_warn(drv, "WARNING: Intel (R) Network Connections are quality tested using Intel (R) Ethernet Optics. Using untested modules is not supported and may cause unstable operation or damage to the module or the adapter. Intel Corporation is not responsible for any harm caused by using untested modules.\n"); status = 0; } else { hw_dbg(hw, diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_ptp.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_ptp.c index c247a225a3e0..8902ae683457 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe_ptp.c +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_ptp.c @@ -456,7 +456,7 @@ void ixgbe_ptp_rx_hang(struct ixgbe_adapter *adapter) IXGBE_READ_REG(hw, IXGBE_RXSTMPH); adapter->last_rx_ptp_check = jiffies; - e_warn(drv, "clearing RX Timestamp hang"); + e_warn(drv, "clearing RX Timestamp hang\n"); } } @@ -512,7 +512,7 @@ static void ixgbe_ptp_tx_hwtstamp_work(struct work_struct *work) dev_kfree_skb_any(adapter->ptp_tx_skb); adapter->ptp_tx_skb = NULL; clear_bit_unlock(__IXGBE_PTP_TX_IN_PROGRESS, &adapter->state); - e_warn(drv, "clearing Tx Timestamp hang"); + e_warn(drv, "clearing Tx Timestamp hang\n"); return; } -- cgit v1.2.1 From c509bdc20dd255842d4e9302aad12baa7d166911 Mon Sep 17 00:00:00 2001 From: Philipp Zabel Date: Mon, 7 Apr 2014 10:22:36 +0200 Subject: imx-drm: imx-drm-core: fix imx_drm_encoder_get_mux_id The decoder mux id is equal to the port id of the encoder's input port that is connected to the given crtc, not to the endpoint id (which is arbitrary and usually zero). Signed-off-by: Philipp Zabel Tested-by: Shawn Guo Signed-off-by: Russell King --- drivers/staging/imx-drm/imx-drm-core.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/staging/imx-drm/imx-drm-core.c b/drivers/staging/imx-drm/imx-drm-core.c index 4144a75e5f71..bc7f8bd227c7 100644 --- a/drivers/staging/imx-drm/imx-drm-core.c +++ b/drivers/staging/imx-drm/imx-drm-core.c @@ -517,7 +517,7 @@ int imx_drm_encoder_get_mux_id(struct device_node *node, of_node_put(port); if (port == imx_crtc->port) { ret = of_graph_parse_endpoint(ep, &endpoint); - return ret ? ret : endpoint.id; + return ret ? ret : endpoint.port; } } while (ep); -- cgit v1.2.1 From 1c2366298b105824e68e790bff1106e2d4ee2a30 Mon Sep 17 00:00:00 2001 From: Shawn Guo Date: Mon, 14 Apr 2014 10:02:26 +0800 Subject: imx-drm: imx-drm-core: skip components whose parent device is disabled In a board setup which disables LDB device node completely by changing status to 'disabled', and only enables HDMI device, we're running into the problem that imx-drm master never succeeds in binding, and hence HDMI does not come up either. &ldb { status = "disabled"; lvds-channel@1 { ... status = "okay"; }; }; The imx-drm-core should really skip the LVDS channels no matter what lvds-channel's status is, if LDB device is disabled. Let's consider such setup a misconfiguration, give a warning in there and not add the component. Signed-off-by: Shawn Guo Acked-by: Philipp Zabel Signed-off-by: Russell King --- drivers/staging/imx-drm/imx-drm-core.c | 5 +++++ 1 file changed, 5 insertions(+) (limited to 'drivers') diff --git a/drivers/staging/imx-drm/imx-drm-core.c b/drivers/staging/imx-drm/imx-drm-core.c index bc7f8bd227c7..c270c9ae6d27 100644 --- a/drivers/staging/imx-drm/imx-drm-core.c +++ b/drivers/staging/imx-drm/imx-drm-core.c @@ -675,6 +675,11 @@ static int imx_drm_platform_probe(struct platform_device *pdev) if (!remote || !of_device_is_available(remote)) { of_node_put(remote); continue; + } else if (!of_device_is_available(remote->parent)) { + dev_warn(&pdev->dev, "parent device of %s is not available\n", + remote->full_name); + of_node_put(remote); + continue; } ret = imx_drm_add_component(&pdev->dev, remote); -- cgit v1.2.1 From 76e6dcece841faebbee78895780e8209ff40d922 Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Fri, 18 Apr 2014 09:08:11 -0400 Subject: drm/radeon: disable dpm on rv770 by default There seem to be stability issues on a number of cards. bugs: https://bugs.freedesktop.org/show_bug.cgi?id=76286 https://bugzilla.redhat.com/show_bug.cgi?id=1085785 https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=741619 Signed-off-by: Alex Deucher Cc: matthias.graf@st.ovqu.de Cc: bp@alien8.de Cc: stable@vger.kernel.org --- drivers/gpu/drm/radeon/radeon_pm.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/radeon/radeon_pm.c b/drivers/gpu/drm/radeon/radeon_pm.c index ee738a524639..0c4473db8501 100644 --- a/drivers/gpu/drm/radeon/radeon_pm.c +++ b/drivers/gpu/drm/radeon/radeon_pm.c @@ -1257,6 +1257,7 @@ int radeon_pm_init(struct radeon_device *rdev) case CHIP_RV670: case CHIP_RS780: case CHIP_RS880: + case CHIP_RV770: case CHIP_BARTS: case CHIP_TURKS: case CHIP_CAICOS: @@ -1273,7 +1274,6 @@ int radeon_pm_init(struct radeon_device *rdev) else rdev->pm.pm_method = PM_METHOD_PROFILE; break; - case CHIP_RV770: case CHIP_RV730: case CHIP_RV710: case CHIP_RV740: -- cgit v1.2.1 From 24315814239a3fdb306244c99bd076bc79db4ade Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Christian=20K=C3=B6nig?= Date: Sat, 19 Apr 2014 18:57:14 +0200 Subject: drm/radeon: use fixed PPL ref divider if needed MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Signed-off-by: Christian König --- drivers/gpu/drm/radeon/radeon_display.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/radeon/radeon_display.c b/drivers/gpu/drm/radeon/radeon_display.c index 2f7cbb901fb1..e6c3c5488259 100644 --- a/drivers/gpu/drm/radeon/radeon_display.c +++ b/drivers/gpu/drm/radeon/radeon_display.c @@ -880,7 +880,12 @@ void radeon_compute_pll_avivo(struct radeon_pll *pll, ref_div_min = pll->reference_div; else ref_div_min = pll->min_ref_div; - ref_div_max = pll->max_ref_div; + + if (pll->flags & RADEON_PLL_USE_FRAC_FB_DIV && + pll->flags & RADEON_PLL_USE_REF_DIV) + ref_div_max = pll->reference_div; + else + ref_div_max = pll->max_ref_div; /* determine allowed post divider range */ if (pll->flags & RADEON_PLL_USE_POST_DIV) { -- cgit v1.2.1 From 06491e84f0f95dbe105b74fef32e7063e349f2d7 Mon Sep 17 00:00:00 2001 From: Adam Thomson Date: Tue, 8 Apr 2014 13:55:17 -0700 Subject: Input: da9055_onkey - remove use of regmap_irq_get_virq() Using platform_get_irq_byname() to retrieve the IRQ number returns the VIRQ number rather than the local IRQ number for the device. Passing that value then into regmap_irq_get_virq() causes a failure because the function is expecting the local IRQ number (e.g. 0, 1, 2, 3, etc). This patch removes use of regmap_irq_get_virq() to prevent this failure from happening. Signed-off-by: Adam Thomson Signed-off-by: Andrew Morton Signed-off-by: Dmitry Torokhov --- drivers/input/misc/da9055_onkey.c | 1 - 1 file changed, 1 deletion(-) (limited to 'drivers') diff --git a/drivers/input/misc/da9055_onkey.c b/drivers/input/misc/da9055_onkey.c index 4b11ede34950..4765799fef74 100644 --- a/drivers/input/misc/da9055_onkey.c +++ b/drivers/input/misc/da9055_onkey.c @@ -109,7 +109,6 @@ static int da9055_onkey_probe(struct platform_device *pdev) INIT_DELAYED_WORK(&onkey->work, da9055_onkey_work); - irq = regmap_irq_get_virq(da9055->irq_data, irq); err = request_threaded_irq(irq, NULL, da9055_onkey_irq, IRQF_TRIGGER_HIGH | IRQF_ONESHOT, "ONKEY", onkey); -- cgit v1.2.1 From 2fdf4cd9a2afb113e566dfe6ee5df55ada8c0631 Mon Sep 17 00:00:00 2001 From: Alexander Stein Date: Sat, 12 Apr 2014 13:42:24 -0700 Subject: Input: ads7846 - fix device usage within attribute show With commit e585c40ba (Input: ads7846 - convert to hwmon_device_register_with_groups()) the device passed to the attribute's show function isn't the spi device as before. So fixup the passed device to ads7846_read12_ser. Signed-off-by: Alexander Stein Acked-by: Guenter Roeck Signed-off-by: Dmitry Torokhov --- drivers/input/touchscreen/ads7846.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/input/touchscreen/ads7846.c b/drivers/input/touchscreen/ads7846.c index 45a06e495ed2..7f8aa981500d 100644 --- a/drivers/input/touchscreen/ads7846.c +++ b/drivers/input/touchscreen/ads7846.c @@ -425,7 +425,7 @@ static int ads7845_read12_ser(struct device *dev, unsigned command) name ## _show(struct device *dev, struct device_attribute *attr, char *buf) \ { \ struct ads7846 *ts = dev_get_drvdata(dev); \ - ssize_t v = ads7846_read12_ser(dev, \ + ssize_t v = ads7846_read12_ser(&ts->spi->dev, \ READ_12BIT_SER(var)); \ if (v < 0) \ return v; \ -- cgit v1.2.1 From 91ae0e77836b4a13f511b4fc62dc31c523858187 Mon Sep 17 00:00:00 2001 From: Ping Cheng Date: Sat, 12 Apr 2014 13:43:25 -0700 Subject: Input: wacom - missed the last bit of expresskey for DTU-1031 Signed-off-by: Ping Cheng Signed-off-by: Dmitry Torokhov --- drivers/input/tablet/wacom_wac.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/input/tablet/wacom_wac.c b/drivers/input/tablet/wacom_wac.c index 05f371df6c40..3d094c95851d 100644 --- a/drivers/input/tablet/wacom_wac.c +++ b/drivers/input/tablet/wacom_wac.c @@ -1838,7 +1838,7 @@ int wacom_setup_input_capabilities(struct input_dev *input_dev, case DTU: if (features->type == DTUS) { input_set_capability(input_dev, EV_MSC, MSC_SERIAL); - for (i = 0; i < 3; i++) + for (i = 0; i < 4; i++) __set_bit(BTN_0 + i, input_dev->keybit); } __set_bit(BTN_TOOL_PEN, input_dev->keybit); -- cgit v1.2.1 From 5866d9e3b7ecdf96a6089d12bb65736d7c473bce Mon Sep 17 00:00:00 2001 From: Jason Gerecke Date: Sat, 19 Apr 2014 13:46:40 -0700 Subject: Input: wacom - use full 32-bit HID Usage value in switch statement A HID Usage is a 32-bit value: an upper 16-bit "page" and a lower 16-bit ID. While the two halves are normally reported seperately, only the combination uniquely idenfifes a particular HID Usage. The existing code performs the comparison in two steps, first performing a switch on the ID and then verifying the page within each case. While this works fine, it is very akward to handle two Usages that share a single ID, such as HID_USAGE_PRESSURE and HID_USAGE_X because the case statement can only have a single identifier. To work around this, we now check the full 32-bit HID Usage directly rather than first checking the ID and then the page. This allows the switch statement to have distinct cases for e.g. HID_USAGE_PRESSURE and HID_USAGE_X. Signed-off-by: Jason Gerecke Tested-by: Aaron Skomra Reviewed-by: Carl Worth Signed-off-by: Dmitry Torokhov --- drivers/input/tablet/wacom_sys.c | 237 ++++++++++++++++++--------------------- 1 file changed, 109 insertions(+), 128 deletions(-) (limited to 'drivers') diff --git a/drivers/input/tablet/wacom_sys.c b/drivers/input/tablet/wacom_sys.c index b16ebef5b911..5be617755461 100644 --- a/drivers/input/tablet/wacom_sys.c +++ b/drivers/input/tablet/wacom_sys.c @@ -22,23 +22,17 @@ #define HID_USAGE_PAGE_DIGITIZER 0x0d #define HID_USAGE_PAGE_DESKTOP 0x01 #define HID_USAGE 0x09 -#define HID_USAGE_X 0x30 -#define HID_USAGE_Y 0x31 -#define HID_USAGE_X_TILT 0x3d -#define HID_USAGE_Y_TILT 0x3e -#define HID_USAGE_FINGER 0x22 -#define HID_USAGE_STYLUS 0x20 -#define HID_USAGE_CONTACTMAX 0x55 +#define HID_USAGE_X ((HID_USAGE_PAGE_DESKTOP << 16) | 0x30) +#define HID_USAGE_Y ((HID_USAGE_PAGE_DESKTOP << 16) | 0x31) +#define HID_USAGE_X_TILT ((HID_USAGE_PAGE_DIGITIZER << 16) | 0x3d) +#define HID_USAGE_Y_TILT ((HID_USAGE_PAGE_DIGITIZER << 16) | 0x3e) +#define HID_USAGE_FINGER ((HID_USAGE_PAGE_DIGITIZER << 16) | 0x22) +#define HID_USAGE_STYLUS ((HID_USAGE_PAGE_DIGITIZER << 16) | 0x20) +#define HID_USAGE_CONTACTMAX ((HID_USAGE_PAGE_DIGITIZER << 16) | 0x55) #define HID_COLLECTION 0xa1 #define HID_COLLECTION_LOGICAL 0x02 #define HID_COLLECTION_END 0xc0 -enum { - WCM_UNDEFINED = 0, - WCM_DESKTOP, - WCM_DIGITIZER, -}; - struct hid_descriptor { struct usb_descriptor_header header; __le16 bcdHID; @@ -305,7 +299,7 @@ static int wacom_parse_hid(struct usb_interface *intf, char limit = 0; /* result has to be defined as int for some devices */ int result = 0, touch_max = 0; - int i = 0, usage = WCM_UNDEFINED, finger = 0, pen = 0; + int i = 0, page = 0, finger = 0, pen = 0; unsigned char *report; report = kzalloc(hid_desc->wDescriptorLength, GFP_KERNEL); @@ -332,134 +326,121 @@ static int wacom_parse_hid(struct usb_interface *intf, switch (report[i]) { case HID_USAGE_PAGE: - switch (report[i + 1]) { - case HID_USAGE_PAGE_DIGITIZER: - usage = WCM_DIGITIZER; - i++; - break; - - case HID_USAGE_PAGE_DESKTOP: - usage = WCM_DESKTOP; - i++; - break; - } + page = report[i + 1]; + i++; break; case HID_USAGE: - switch (report[i + 1]) { + switch (page << 16 | report[i + 1]) { case HID_USAGE_X: - if (usage == WCM_DESKTOP) { - if (finger) { - features->device_type = BTN_TOOL_FINGER; - /* touch device at least supports one touch point */ - touch_max = 1; - switch (features->type) { - case TABLETPC2FG: - features->pktlen = WACOM_PKGLEN_TPC2FG; - break; - - case MTSCREEN: - case WACOM_24HDT: - features->pktlen = WACOM_PKGLEN_MTOUCH; - break; - - case MTTPC: - features->pktlen = WACOM_PKGLEN_MTTPC; - break; - - case BAMBOO_PT: - features->pktlen = WACOM_PKGLEN_BBTOUCH; - break; - - default: - features->pktlen = WACOM_PKGLEN_GRAPHIRE; - break; - } - - switch (features->type) { - case BAMBOO_PT: - features->x_phy = - get_unaligned_le16(&report[i + 5]); - features->x_max = - get_unaligned_le16(&report[i + 8]); - i += 15; - break; - - case WACOM_24HDT: - features->x_max = - get_unaligned_le16(&report[i + 3]); - features->x_phy = - get_unaligned_le16(&report[i + 8]); - features->unit = report[i - 1]; - features->unitExpo = report[i - 3]; - i += 12; - break; - - default: - features->x_max = - get_unaligned_le16(&report[i + 3]); - features->x_phy = - get_unaligned_le16(&report[i + 6]); - features->unit = report[i + 9]; - features->unitExpo = report[i + 11]; - i += 12; - break; - } - } else if (pen) { - /* penabled only accepts exact bytes of data */ - if (features->type >= TABLETPC) - features->pktlen = WACOM_PKGLEN_GRAPHIRE; - features->device_type = BTN_TOOL_PEN; + if (finger) { + features->device_type = BTN_TOOL_FINGER; + /* touch device at least supports one touch point */ + touch_max = 1; + switch (features->type) { + case TABLETPC2FG: + features->pktlen = WACOM_PKGLEN_TPC2FG; + break; + + case MTSCREEN: + case WACOM_24HDT: + features->pktlen = WACOM_PKGLEN_MTOUCH; + break; + + case MTTPC: + features->pktlen = WACOM_PKGLEN_MTTPC; + break; + + case BAMBOO_PT: + features->pktlen = WACOM_PKGLEN_BBTOUCH; + break; + + default: + features->pktlen = WACOM_PKGLEN_GRAPHIRE; + break; + } + + switch (features->type) { + case BAMBOO_PT: + features->x_phy = + get_unaligned_le16(&report[i + 5]); + features->x_max = + get_unaligned_le16(&report[i + 8]); + i += 15; + break; + + case WACOM_24HDT: features->x_max = get_unaligned_le16(&report[i + 3]); - i += 4; + features->x_phy = + get_unaligned_le16(&report[i + 8]); + features->unit = report[i - 1]; + features->unitExpo = report[i - 3]; + i += 12; + break; + + default: + features->x_max = + get_unaligned_le16(&report[i + 3]); + features->x_phy = + get_unaligned_le16(&report[i + 6]); + features->unit = report[i + 9]; + features->unitExpo = report[i + 11]; + i += 12; + break; } + } else if (pen) { + /* penabled only accepts exact bytes of data */ + if (features->type >= TABLETPC) + features->pktlen = WACOM_PKGLEN_GRAPHIRE; + features->device_type = BTN_TOOL_PEN; + features->x_max = + get_unaligned_le16(&report[i + 3]); + i += 4; } break; case HID_USAGE_Y: - if (usage == WCM_DESKTOP) { - if (finger) { - switch (features->type) { - case TABLETPC2FG: - case MTSCREEN: - case MTTPC: - features->y_max = - get_unaligned_le16(&report[i + 3]); - features->y_phy = - get_unaligned_le16(&report[i + 6]); - i += 7; - break; - - case WACOM_24HDT: - features->y_max = - get_unaligned_le16(&report[i + 3]); - features->y_phy = - get_unaligned_le16(&report[i - 2]); - i += 7; - break; - - case BAMBOO_PT: - features->y_phy = - get_unaligned_le16(&report[i + 3]); - features->y_max = - get_unaligned_le16(&report[i + 6]); - i += 12; - break; - - default: - features->y_max = - features->x_max; - features->y_phy = - get_unaligned_le16(&report[i + 3]); - i += 4; - break; - } - } else if (pen) { + if (finger) { + switch (features->type) { + case TABLETPC2FG: + case MTSCREEN: + case MTTPC: + features->y_max = + get_unaligned_le16(&report[i + 3]); + features->y_phy = + get_unaligned_le16(&report[i + 6]); + i += 7; + break; + + case WACOM_24HDT: + features->y_max = + get_unaligned_le16(&report[i + 3]); + features->y_phy = + get_unaligned_le16(&report[i - 2]); + i += 7; + break; + + case BAMBOO_PT: + features->y_phy = + get_unaligned_le16(&report[i + 3]); + features->y_max = + get_unaligned_le16(&report[i + 6]); + i += 12; + break; + + default: features->y_max = + features->x_max; + features->y_phy = get_unaligned_le16(&report[i + 3]); i += 4; + break; } + } else if (pen) { + features->y_max = + get_unaligned_le16(&report[i + 3]); + i += 4; } break; @@ -489,7 +470,7 @@ static int wacom_parse_hid(struct usb_interface *intf, case HID_COLLECTION_END: /* reset UsagePage and Finger */ - finger = usage = 0; + finger = page = 0; break; case HID_COLLECTION: -- cgit v1.2.1 From e9fc413f4a5ebd9f0f7bdf923c43191e99fc1970 Mon Sep 17 00:00:00 2001 From: Jason Gerecke Date: Sat, 19 Apr 2014 13:49:37 -0700 Subject: Input: wacom - override 'pressure_max' with value from HID_USAGE_PRESSURE The 0xEC sensor is used in multiple tablet PCs and curiously has versions that report 256 levels of pressure (Samsung Slate 7) as well as versions that report 1024 levels (Lenovo Thinkpad Yoga). To allow both versions to work properly, we allow the value of HID_USAGE_PRESSURE reported to override pressure_max. Signed-off-by: Jason Gerecke Tested-by: Aaron Skomra Reviewed-by: Carl Worth Signed-off-by: Dmitry Torokhov --- drivers/input/tablet/wacom_sys.c | 9 +++++++++ 1 file changed, 9 insertions(+) (limited to 'drivers') diff --git a/drivers/input/tablet/wacom_sys.c b/drivers/input/tablet/wacom_sys.c index 5be617755461..611fc3905d00 100644 --- a/drivers/input/tablet/wacom_sys.c +++ b/drivers/input/tablet/wacom_sys.c @@ -24,6 +24,7 @@ #define HID_USAGE 0x09 #define HID_USAGE_X ((HID_USAGE_PAGE_DESKTOP << 16) | 0x30) #define HID_USAGE_Y ((HID_USAGE_PAGE_DESKTOP << 16) | 0x31) +#define HID_USAGE_PRESSURE ((HID_USAGE_PAGE_DIGITIZER << 16) | 0x30) #define HID_USAGE_X_TILT ((HID_USAGE_PAGE_DIGITIZER << 16) | 0x3d) #define HID_USAGE_Y_TILT ((HID_USAGE_PAGE_DIGITIZER << 16) | 0x3e) #define HID_USAGE_FINGER ((HID_USAGE_PAGE_DIGITIZER << 16) | 0x22) @@ -465,6 +466,14 @@ static int wacom_parse_hid(struct usb_interface *intf, wacom_retrieve_report_data(intf, features); i++; break; + + case HID_USAGE_PRESSURE: + if (pen) { + features->pressure_max = + get_unaligned_le16(&report[i + 3]); + i += 4; + } + break; } break; -- cgit v1.2.1 From 74b634178e5f0e2d8d2d26f308c440687930274b Mon Sep 17 00:00:00 2001 From: Jason Gerecke Date: Sat, 19 Apr 2014 13:50:22 -0700 Subject: Input: wacom - references to 'wacom->data' should use 'unsigned char*' 'wacom->data' contains raw binary data and can lead to unexpected behavior if a byte under examination happens to have its MSB set. Signed-off-by: Jason Gerecke Tested-by: Aaron Skomra Reviewed-by: Carl Worth Signed-off-by: Dmitry Torokhov --- drivers/input/tablet/wacom_wac.c | 27 +++++++++------------------ 1 file changed, 9 insertions(+), 18 deletions(-) (limited to 'drivers') diff --git a/drivers/input/tablet/wacom_wac.c b/drivers/input/tablet/wacom_wac.c index 3d094c95851d..99710e9fdd6a 100644 --- a/drivers/input/tablet/wacom_wac.c +++ b/drivers/input/tablet/wacom_wac.c @@ -178,10 +178,9 @@ static int wacom_ptu_irq(struct wacom_wac *wacom) static int wacom_dtu_irq(struct wacom_wac *wacom) { - struct wacom_features *features = &wacom->features; - char *data = wacom->data; + unsigned char *data = wacom->data; struct input_dev *input = wacom->input; - int prox = data[1] & 0x20, pressure; + int prox = data[1] & 0x20; dev_dbg(input->dev.parent, "%s: received report #%d", __func__, data[0]); @@ -198,10 +197,7 @@ static int wacom_dtu_irq(struct wacom_wac *wacom) input_report_key(input, BTN_STYLUS2, data[1] & 0x10); input_report_abs(input, ABS_X, le16_to_cpup((__le16 *)&data[2])); input_report_abs(input, ABS_Y, le16_to_cpup((__le16 *)&data[4])); - pressure = ((data[7] & 0x01) << 8) | data[6]; - if (pressure < 0) - pressure = features->pressure_max + pressure + 1; - input_report_abs(input, ABS_PRESSURE, pressure); + input_report_abs(input, ABS_PRESSURE, ((data[7] & 0x01) << 8) | data[6]); input_report_key(input, BTN_TOUCH, data[1] & 0x05); if (!prox) /* out-prox */ wacom->id[0] = 0; @@ -906,7 +902,7 @@ static int int_dist(int x1, int y1, int x2, int y2) static int wacom_24hdt_irq(struct wacom_wac *wacom) { struct input_dev *input = wacom->input; - char *data = wacom->data; + unsigned char *data = wacom->data; int i; int current_num_contacts = data[61]; int contacts_to_send = 0; @@ -959,7 +955,7 @@ static int wacom_24hdt_irq(struct wacom_wac *wacom) static int wacom_mt_touch(struct wacom_wac *wacom) { struct input_dev *input = wacom->input; - char *data = wacom->data; + unsigned char *data = wacom->data; int i; int current_num_contacts = data[2]; int contacts_to_send = 0; @@ -1038,7 +1034,7 @@ static int wacom_tpc_mt_touch(struct wacom_wac *wacom) static int wacom_tpc_single_touch(struct wacom_wac *wacom, size_t len) { - char *data = wacom->data; + unsigned char *data = wacom->data; struct input_dev *input = wacom->input; bool prox; int x = 0, y = 0; @@ -1074,10 +1070,8 @@ static int wacom_tpc_single_touch(struct wacom_wac *wacom, size_t len) static int wacom_tpc_pen(struct wacom_wac *wacom) { - struct wacom_features *features = &wacom->features; - char *data = wacom->data; + unsigned char *data = wacom->data; struct input_dev *input = wacom->input; - int pressure; bool prox = data[1] & 0x20; if (!wacom->shared->stylus_in_proximity) /* first in prox */ @@ -1093,10 +1087,7 @@ static int wacom_tpc_pen(struct wacom_wac *wacom) input_report_key(input, BTN_STYLUS2, data[1] & 0x10); input_report_abs(input, ABS_X, le16_to_cpup((__le16 *)&data[2])); input_report_abs(input, ABS_Y, le16_to_cpup((__le16 *)&data[4])); - pressure = ((data[7] & 0x01) << 8) | data[6]; - if (pressure < 0) - pressure = features->pressure_max + pressure + 1; - input_report_abs(input, ABS_PRESSURE, pressure); + input_report_abs(input, ABS_PRESSURE, ((data[7] & 0x01) << 8) | data[6]); input_report_key(input, BTN_TOUCH, data[1] & 0x05); input_report_key(input, wacom->tool[0], prox); return 1; @@ -1107,7 +1098,7 @@ static int wacom_tpc_pen(struct wacom_wac *wacom) static int wacom_tpc_irq(struct wacom_wac *wacom, size_t len) { - char *data = wacom->data; + unsigned char *data = wacom->data; dev_dbg(wacom->input->dev.parent, "%s: received report #%d\n", __func__, data[0]); -- cgit v1.2.1 From 38a1807badd26d413e8f2b0393a0c5bfdf9e912b Mon Sep 17 00:00:00 2001 From: Jason Gerecke Date: Sat, 19 Apr 2014 13:51:41 -0700 Subject: Input: wacom - handle 1024 pressure levels in wacom_tpc_pen Some tablet PC sensors (e.g. the 0xEC found in the Thinkpad Yoga) report more than 256 pressure levels and will experience wraparound unless the full range is read. Signed-off-by: Jason Gerecke Tested-by: Aaron Skomra Reviewed-by: Carl Worth Signed-off-by: Dmitry Torokhov --- drivers/input/tablet/wacom_wac.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/input/tablet/wacom_wac.c b/drivers/input/tablet/wacom_wac.c index 99710e9fdd6a..4822c57a3756 100644 --- a/drivers/input/tablet/wacom_wac.c +++ b/drivers/input/tablet/wacom_wac.c @@ -1087,7 +1087,7 @@ static int wacom_tpc_pen(struct wacom_wac *wacom) input_report_key(input, BTN_STYLUS2, data[1] & 0x10); input_report_abs(input, ABS_X, le16_to_cpup((__le16 *)&data[2])); input_report_abs(input, ABS_Y, le16_to_cpup((__le16 *)&data[4])); - input_report_abs(input, ABS_PRESSURE, ((data[7] & 0x01) << 8) | data[6]); + input_report_abs(input, ABS_PRESSURE, ((data[7] & 0x03) << 8) | data[6]); input_report_key(input, BTN_TOUCH, data[1] & 0x05); input_report_key(input, wacom->tool[0], prox); return 1; -- cgit v1.2.1 From 0456c66f4e905e1ca839318219c770988b47975c Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Sat, 19 Apr 2014 20:39:35 -0700 Subject: Input: serio - add firmware_id sysfs attribute serio devices exposed via platform firmware interfaces such as ACPI may provide additional identifying information of use to userspace. We don't associate the serio devices with the firmware device (we don't set it as parent), so there's no way for userspace to make use of this information. We cannot change the parent for serio devices instantiated though a firmware interface as that would break suspend / resume ordering. Therefore this patch adds a new firmware_id sysfs attribute so that userspace can get a string from there with any additional identifying information the firmware interface may provide. Signed-off-by: Hans de Goede Acked-by: Peter Hutterer Signed-off-by: Dmitry Torokhov --- drivers/input/serio/serio.c | 14 ++++++++++++++ 1 file changed, 14 insertions(+) (limited to 'drivers') diff --git a/drivers/input/serio/serio.c b/drivers/input/serio/serio.c index 8f4c4ab04bc2..b29134de983b 100644 --- a/drivers/input/serio/serio.c +++ b/drivers/input/serio/serio.c @@ -451,6 +451,13 @@ static ssize_t serio_set_bind_mode(struct device *dev, struct device_attribute * return retval; } +static ssize_t firmware_id_show(struct device *dev, struct device_attribute *attr, char *buf) +{ + struct serio *serio = to_serio_port(dev); + + return sprintf(buf, "%s\n", serio->firmware_id); +} + static DEVICE_ATTR_RO(type); static DEVICE_ATTR_RO(proto); static DEVICE_ATTR_RO(id); @@ -473,12 +480,14 @@ static DEVICE_ATTR_RO(modalias); static DEVICE_ATTR_WO(drvctl); static DEVICE_ATTR(description, S_IRUGO, serio_show_description, NULL); static DEVICE_ATTR(bind_mode, S_IWUSR | S_IRUGO, serio_show_bind_mode, serio_set_bind_mode); +static DEVICE_ATTR_RO(firmware_id); static struct attribute *serio_device_attrs[] = { &dev_attr_modalias.attr, &dev_attr_description.attr, &dev_attr_drvctl.attr, &dev_attr_bind_mode.attr, + &dev_attr_firmware_id.attr, NULL }; @@ -921,9 +930,14 @@ static int serio_uevent(struct device *dev, struct kobj_uevent_env *env) SERIO_ADD_UEVENT_VAR("SERIO_PROTO=%02x", serio->id.proto); SERIO_ADD_UEVENT_VAR("SERIO_ID=%02x", serio->id.id); SERIO_ADD_UEVENT_VAR("SERIO_EXTRA=%02x", serio->id.extra); + SERIO_ADD_UEVENT_VAR("MODALIAS=serio:ty%02Xpr%02Xid%02Xex%02X", serio->id.type, serio->id.proto, serio->id.id, serio->id.extra); + if (serio->firmware_id[0]) + SERIO_ADD_UEVENT_VAR("SERIO_FIRMWARE_ID=%s", + serio->firmware_id); + return 0; } #undef SERIO_ADD_UEVENT_VAR -- cgit v1.2.1 From a7c5868c3482127cb308c779b8a6460a3353c17f Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Sat, 19 Apr 2014 20:47:35 -0700 Subject: Input: i8042 - add firmware_id support Fill in the new serio firmware_id sysfs attribute for pnp instantiated 8042 serio ports. Signed-off-by: Hans de Goede Acked-by: Peter Hutterer Signed-off-by: Dmitry Torokhov --- drivers/input/serio/i8042-x86ia64io.h | 15 +++++++++++++++ drivers/input/serio/i8042.c | 6 ++++++ 2 files changed, 21 insertions(+) (limited to 'drivers') diff --git a/drivers/input/serio/i8042-x86ia64io.h b/drivers/input/serio/i8042-x86ia64io.h index 0ec9abbe31fe..381b20d4c561 100644 --- a/drivers/input/serio/i8042-x86ia64io.h +++ b/drivers/input/serio/i8042-x86ia64io.h @@ -702,6 +702,17 @@ static int i8042_pnp_aux_irq; static char i8042_pnp_kbd_name[32]; static char i8042_pnp_aux_name[32]; +static void i8042_pnp_id_to_string(struct pnp_id *id, char *dst, int dst_size) +{ + strlcpy(dst, "PNP:", dst_size); + + while (id) { + strlcat(dst, " ", dst_size); + strlcat(dst, id->id, dst_size); + id = id->next; + } +} + static int i8042_pnp_kbd_probe(struct pnp_dev *dev, const struct pnp_device_id *did) { if (pnp_port_valid(dev, 0) && pnp_port_len(dev, 0) == 1) @@ -718,6 +729,8 @@ static int i8042_pnp_kbd_probe(struct pnp_dev *dev, const struct pnp_device_id * strlcat(i8042_pnp_kbd_name, ":", sizeof(i8042_pnp_kbd_name)); strlcat(i8042_pnp_kbd_name, pnp_dev_name(dev), sizeof(i8042_pnp_kbd_name)); } + i8042_pnp_id_to_string(dev->id, i8042_kbd_firmware_id, + sizeof(i8042_kbd_firmware_id)); /* Keyboard ports are always supposed to be wakeup-enabled */ device_set_wakeup_enable(&dev->dev, true); @@ -742,6 +755,8 @@ static int i8042_pnp_aux_probe(struct pnp_dev *dev, const struct pnp_device_id * strlcat(i8042_pnp_aux_name, ":", sizeof(i8042_pnp_aux_name)); strlcat(i8042_pnp_aux_name, pnp_dev_name(dev), sizeof(i8042_pnp_aux_name)); } + i8042_pnp_id_to_string(dev->id, i8042_aux_firmware_id, + sizeof(i8042_aux_firmware_id)); i8042_pnp_aux_devices++; return 0; diff --git a/drivers/input/serio/i8042.c b/drivers/input/serio/i8042.c index 020053fa5aaa..3807c3e971cc 100644 --- a/drivers/input/serio/i8042.c +++ b/drivers/input/serio/i8042.c @@ -87,6 +87,8 @@ MODULE_PARM_DESC(debug, "Turn i8042 debugging mode on and off"); #endif static bool i8042_bypass_aux_irq_test; +static char i8042_kbd_firmware_id[128]; +static char i8042_aux_firmware_id[128]; #include "i8042.h" @@ -1218,6 +1220,8 @@ static int __init i8042_create_kbd_port(void) serio->dev.parent = &i8042_platform_device->dev; strlcpy(serio->name, "i8042 KBD port", sizeof(serio->name)); strlcpy(serio->phys, I8042_KBD_PHYS_DESC, sizeof(serio->phys)); + strlcpy(serio->firmware_id, i8042_kbd_firmware_id, + sizeof(serio->firmware_id)); port->serio = serio; port->irq = I8042_KBD_IRQ; @@ -1244,6 +1248,8 @@ static int __init i8042_create_aux_port(int idx) if (idx < 0) { strlcpy(serio->name, "i8042 AUX port", sizeof(serio->name)); strlcpy(serio->phys, I8042_AUX_PHYS_DESC, sizeof(serio->phys)); + strlcpy(serio->firmware_id, i8042_aux_firmware_id, + sizeof(serio->firmware_id)); serio->close = i8042_port_close; } else { snprintf(serio->name, sizeof(serio->name), "i8042 AUX%d port", idx); -- cgit v1.2.1 From 43e19888b1fe2a3e8a5543030c5b286cde38b3f5 Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Sat, 19 Apr 2014 22:26:41 -0700 Subject: Input: synaptics - report INPUT_PROP_TOPBUTTONPAD property Check PNP ID of the PS/2 AUX port and report INPUT_PROP_TOPBUTTONPAD property for for touchpads with top button areas. Signed-off-by: Hans de Goede Signed-off-by: Dmitry Torokhov --- drivers/input/mouse/synaptics.c | 55 +++++++++++++++++++++++++++++++++++++++-- 1 file changed, 53 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/input/mouse/synaptics.c b/drivers/input/mouse/synaptics.c index d8d49d10f9bb..9d754103337d 100644 --- a/drivers/input/mouse/synaptics.c +++ b/drivers/input/mouse/synaptics.c @@ -117,6 +117,44 @@ void synaptics_reset(struct psmouse *psmouse) } #ifdef CONFIG_MOUSE_PS2_SYNAPTICS +/* This list has been kindly provided by Synaptics. */ +static const char * const topbuttonpad_pnp_ids[] = { + "LEN0017", + "LEN0018", + "LEN0019", + "LEN0023", + "LEN002A", + "LEN002B", + "LEN002C", + "LEN002D", + "LEN002E", + "LEN0033", /* Helix */ + "LEN0034", /* T431s, T540, X1 Carbon 2nd */ + "LEN0035", /* X240 */ + "LEN0036", /* T440 */ + "LEN0037", + "LEN0038", + "LEN0041", + "LEN0042", /* Yoga */ + "LEN0045", + "LEN0046", + "LEN0047", + "LEN0048", + "LEN0049", + "LEN2000", + "LEN2001", + "LEN2002", + "LEN2003", + "LEN2004", /* L440 */ + "LEN2005", + "LEN2006", + "LEN2007", + "LEN2008", + "LEN2009", + "LEN200A", + "LEN200B", + NULL +}; /***************************************************************************** * Synaptics communications functions @@ -1255,8 +1293,10 @@ static void set_abs_position_params(struct input_dev *dev, input_abs_set_res(dev, y_code, priv->y_res); } -static void set_input_params(struct input_dev *dev, struct synaptics_data *priv) +static void set_input_params(struct psmouse *psmouse, + struct synaptics_data *priv) { + struct input_dev *dev = psmouse->dev; int i; /* Things that apply to both modes */ @@ -1325,6 +1365,17 @@ static void set_input_params(struct input_dev *dev, struct synaptics_data *priv) if (SYN_CAP_CLICKPAD(priv->ext_cap_0c)) { __set_bit(INPUT_PROP_BUTTONPAD, dev->propbit); + /* See if this buttonpad has a top button area */ + if (!strncmp(psmouse->ps2dev.serio->firmware_id, "PNP:", 4)) { + for (i = 0; topbuttonpad_pnp_ids[i]; i++) { + if (strstr(psmouse->ps2dev.serio->firmware_id, + topbuttonpad_pnp_ids[i])) { + __set_bit(INPUT_PROP_TOPBUTTONPAD, + dev->propbit); + break; + } + } + } /* Clickpads report only left button */ __clear_bit(BTN_RIGHT, dev->keybit); __clear_bit(BTN_MIDDLE, dev->keybit); @@ -1593,7 +1644,7 @@ static int __synaptics_init(struct psmouse *psmouse, bool absolute_mode) priv->capabilities, priv->ext_cap, priv->ext_cap_0c, priv->board_id, priv->firmware_id); - set_input_params(psmouse->dev, priv); + set_input_params(psmouse, priv); /* * Encode touchpad model so that it can be used to set -- cgit v1.2.1 From 46a2986ebbe18757c2d8c352f8fb6e0f4f0754e3 Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Sat, 19 Apr 2014 22:31:18 -0700 Subject: Input: synaptics - add min/max quirk for ThinkPad T431s, L440, L540, S1 Yoga and X1 We expect that all the Haswell series will need such quirks, sigh. The T431s seems to be T430 hardware in a T440s case, using the T440s touchpad, with the same min/max issue. The X1 Carbon 3rd generation name says 2nd while it is a 3rd generation. The X1 and T431s share a PnPID with the T540p, but the reported ranges are closer to those of the T440s. HdG: Squashed 5 quirk patches into one. T431s + L440 + L540 are written by me, S1 Yoga and X1 are written by Benjamin Tissoires. Hdg: Standardized S1 Yoga and X1 values, Yoga uses the same touchpad as the X240, X1 uses the same touchpad as the T440. Cc: stable@vger.kernel.org Signed-off-by: Benjamin Tissoires Signed-off-by: Hans de Goede Signed-off-by: Dmitry Torokhov --- drivers/input/mouse/synaptics.c | 42 +++++++++++++++++++++++++++++++++++++++++ 1 file changed, 42 insertions(+) (limited to 'drivers') diff --git a/drivers/input/mouse/synaptics.c b/drivers/input/mouse/synaptics.c index 9d754103337d..ef9f4913450d 100644 --- a/drivers/input/mouse/synaptics.c +++ b/drivers/input/mouse/synaptics.c @@ -1565,6 +1565,14 @@ static const struct dmi_system_id min_max_dmi_table[] __initconst = { }, .driver_data = (int []){1232, 5710, 1156, 4696}, }, + { + /* Lenovo ThinkPad T431s */ + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"), + DMI_MATCH(DMI_PRODUCT_VERSION, "ThinkPad T431"), + }, + .driver_data = (int []){1024, 5112, 2024, 4832}, + }, { /* Lenovo ThinkPad T440s */ .matches = { @@ -1573,6 +1581,14 @@ static const struct dmi_system_id min_max_dmi_table[] __initconst = { }, .driver_data = (int []){1024, 5112, 2024, 4832}, }, + { + /* Lenovo ThinkPad L440 */ + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"), + DMI_MATCH(DMI_PRODUCT_VERSION, "ThinkPad L440"), + }, + .driver_data = (int []){1024, 5112, 2024, 4832}, + }, { /* Lenovo ThinkPad T540p */ .matches = { @@ -1581,6 +1597,32 @@ static const struct dmi_system_id min_max_dmi_table[] __initconst = { }, .driver_data = (int []){1024, 5056, 2058, 4832}, }, + { + /* Lenovo ThinkPad L540 */ + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"), + DMI_MATCH(DMI_PRODUCT_VERSION, "ThinkPad L540"), + }, + .driver_data = (int []){1024, 5112, 2024, 4832}, + }, + { + /* Lenovo Yoga S1 */ + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"), + DMI_EXACT_MATCH(DMI_PRODUCT_VERSION, + "ThinkPad S1 Yoga"), + }, + .driver_data = (int []){1232, 5710, 1156, 4696}, + }, + { + /* Lenovo ThinkPad X1 Carbon Haswell (3rd generation) */ + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"), + DMI_MATCH(DMI_PRODUCT_VERSION, + "ThinkPad X1 Carbon 2nd"), + }, + .driver_data = (int []){1024, 5112, 2024, 4832}, + }, #endif { } }; -- cgit v1.2.1 From c2fb3094669a3205f16a32f4119d0afe40b1a1fd Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Christian=20K=C3=B6nig?= Date: Sun, 20 Apr 2014 13:24:32 +0200 Subject: drm/radeon: improve PLL limit handling in post div calculation MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit This improves the PLL parameters when we work at the limits of the allowed ranges. Signed-off-by: Christian König --- drivers/gpu/drm/radeon/radeon_display.c | 77 ++++++++++++++++++++++----------- 1 file changed, 51 insertions(+), 26 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/radeon/radeon_display.c b/drivers/gpu/drm/radeon/radeon_display.c index e6c3c5488259..8d99d5ee8014 100644 --- a/drivers/gpu/drm/radeon/radeon_display.c +++ b/drivers/gpu/drm/radeon/radeon_display.c @@ -839,6 +839,38 @@ static void avivo_reduce_ratio(unsigned *nom, unsigned *den, } } +/** + * avivo_get_fb_ref_div - feedback and ref divider calculation + * + * @nom: nominator + * @den: denominator + * @post_div: post divider + * @fb_div_max: feedback divider maximum + * @ref_div_max: reference divider maximum + * @fb_div: resulting feedback divider + * @ref_div: resulting reference divider + * + * Calculate feedback and reference divider for a given post divider. Makes + * sure we stay within the limits. + */ +static void avivo_get_fb_ref_div(unsigned nom, unsigned den, unsigned post_div, + unsigned fb_div_max, unsigned ref_div_max, + unsigned *fb_div, unsigned *ref_div) +{ + /* limit reference * post divider to a maximum */ + ref_div_max = min(210 / post_div, ref_div_max); + + /* get matching reference and feedback divider */ + *ref_div = min(max(DIV_ROUND_CLOSEST(den, post_div), 1u), ref_div_max); + *fb_div = DIV_ROUND_CLOSEST(nom * *ref_div * post_div, den); + + /* limit fb divider to its maximum */ + if (*fb_div > fb_div_max) { + *ref_div = DIV_ROUND_CLOSEST(*ref_div * fb_div_max, *fb_div); + *fb_div = fb_div_max; + } +} + /** * radeon_compute_pll_avivo - compute PLL paramaters * @@ -860,6 +892,9 @@ void radeon_compute_pll_avivo(struct radeon_pll *pll, u32 *ref_div_p, u32 *post_div_p) { + unsigned target_clock = pll->flags & RADEON_PLL_USE_FRAC_FB_DIV ? + freq : freq / 10; + unsigned fb_div_min, fb_div_max, fb_div; unsigned post_div_min, post_div_max, post_div; unsigned ref_div_min, ref_div_max, ref_div; @@ -892,7 +927,6 @@ void radeon_compute_pll_avivo(struct radeon_pll *pll, post_div_min = pll->post_div; post_div_max = pll->post_div; } else { - unsigned target_clock = freq / 10; unsigned vco_min, vco_max; if (pll->flags & RADEON_PLL_IS_LCD) { @@ -903,6 +937,11 @@ void radeon_compute_pll_avivo(struct radeon_pll *pll, vco_max = pll->pll_out_max; } + if (pll->flags & RADEON_PLL_USE_FRAC_FB_DIV) { + vco_min *= 10; + vco_max *= 10; + } + post_div_min = vco_min / target_clock; if ((target_clock * post_div_min) < vco_min) ++post_div_min; @@ -917,7 +956,7 @@ void radeon_compute_pll_avivo(struct radeon_pll *pll, } /* represent the searched ratio as fractional number */ - nom = pll->flags & RADEON_PLL_USE_FRAC_FB_DIV ? freq : freq / 10; + nom = target_clock; den = pll->reference_freq; /* reduce the numbers to a simpler ratio */ @@ -931,7 +970,12 @@ void radeon_compute_pll_avivo(struct radeon_pll *pll, diff_best = ~0; for (post_div = post_div_min; post_div <= post_div_max; ++post_div) { - unsigned diff = abs(den - den / post_div * post_div); + unsigned diff; + avivo_get_fb_ref_div(nom, den, post_div, fb_div_max, + ref_div_max, &fb_div, &ref_div); + diff = abs(target_clock - (pll->reference_freq * fb_div) / + (ref_div * post_div)); + if (diff < diff_best || (diff == diff_best && !(pll->flags & RADEON_PLL_PREFER_MINM_OVER_MAXP))) { @@ -941,28 +985,9 @@ void radeon_compute_pll_avivo(struct radeon_pll *pll, } post_div = post_div_best; - /* limit reference * post divider to a maximum */ - ref_div_max = min(210 / post_div, ref_div_max); - - /* get matching reference and feedback divider */ - ref_div = max(DIV_ROUND_CLOSEST(den, post_div), 1u); - fb_div = DIV_ROUND_CLOSEST(nom * ref_div * post_div, den); - - /* we're almost done, but reference and feedback - divider might be to large now */ - - nom = fb_div; - den = ref_div; - - if (fb_div > fb_div_max) { - ref_div = DIV_ROUND_CLOSEST(den * fb_div_max, nom); - fb_div = fb_div_max; - } - - if (ref_div > ref_div_max) { - ref_div = ref_div_max; - fb_div = DIV_ROUND_CLOSEST(nom * ref_div_max, den); - } + /* get the feedback and reference divider for the optimal value */ + avivo_get_fb_ref_div(nom, den, post_div, fb_div_max, ref_div_max, + &fb_div, &ref_div); /* reduce the numbers to a simpler ratio once more */ /* this also makes sure that the reference divider is large enough */ @@ -984,7 +1009,7 @@ void radeon_compute_pll_avivo(struct radeon_pll *pll, *post_div_p = post_div; DRM_DEBUG_KMS("%d - %d, pll dividers - fb: %d.%d ref: %d, post %d\n", - freq, *dot_clock_p, *fb_div_p, *frac_fb_div_p, + freq, *dot_clock_p * 10, *fb_div_p, *frac_fb_div_p, ref_div, post_div); } -- cgit v1.2.1 From da343fc776e0bcb238b65d9d24610819b95d0ef4 Mon Sep 17 00:00:00 2001 From: Thomas Petazzoni Date: Fri, 18 Apr 2014 14:19:47 +0200 Subject: irqchip: armada-370-xp: fix invalid cast of signed value into unsigned variable The armada_370_xp_alloc_msi() function returns a signed int, which is negative on error. However, we store the return value into an irq_hw_number_t, which is unsigned. Therefore, we actually never test if armada_370_xp_alloc_msi() returns an error or not, which may lead us to use hwirq numbers of as 0xffffffe4 (when armada_370_xp_alloc_msi() returns -ENOSPC). This commit fixes that by storing the return value of armada_370_xp_alloc_msi() in a signed variable. Fixes: 31f614edb726fcc4d5aa0f2895fbdec9b04a3ca4 ('irqchip: armada-370-xp: implement MSI support') Cc: # v3.13+ Signed-off-by: Thomas Petazzoni Link: https://lkml.kernel.org/r/1397823593-1932-2-git-send-email-thomas.petazzoni@free-electrons.com Tested-by: Neil Greatorex Signed-off-by: Jason Cooper --- drivers/irqchip/irq-armada-370-xp.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/irqchip/irq-armada-370-xp.c b/drivers/irqchip/irq-armada-370-xp.c index 41be897df8d5..3c8d89b62a21 100644 --- a/drivers/irqchip/irq-armada-370-xp.c +++ b/drivers/irqchip/irq-armada-370-xp.c @@ -132,8 +132,7 @@ static int armada_370_xp_setup_msi_irq(struct msi_chip *chip, struct msi_desc *desc) { struct msi_msg msg; - irq_hw_number_t hwirq; - int virq; + int virq, hwirq; hwirq = armada_370_xp_alloc_msi(); if (hwirq < 0) -- cgit v1.2.1 From 830cbe4b7a918613276aa3d3b28d24410623f92c Mon Sep 17 00:00:00 2001 From: Thomas Petazzoni Date: Fri, 18 Apr 2014 14:19:48 +0200 Subject: irqchip: armada-370-xp: implement the ->check_device() msi_chip operation Until now, we were leaving the ->check_device() msi_chip operation empty, which leads the PCI core to believe that we support both MSI and MSI-X. In fact, we do not support MSI-X, so we have to tell this to the PCI core by providing an implementation of this operation. Fixes: 31f614edb726fcc4d5aa0f2895fbdec9b04a3ca4 ('irqchip: armada-370-xp: implement MSI support') Cc: # v3.13+ Signed-off-by: Thomas Petazzoni Link: https://lkml.kernel.org/r/1397823593-1932-3-git-send-email-thomas.petazzoni@free-electrons.com Tested-by: Neil Greatorex Signed-off-by: Jason Cooper --- drivers/irqchip/irq-armada-370-xp.c | 10 ++++++++++ 1 file changed, 10 insertions(+) (limited to 'drivers') diff --git a/drivers/irqchip/irq-armada-370-xp.c b/drivers/irqchip/irq-armada-370-xp.c index 3c8d89b62a21..78b0ac9129d7 100644 --- a/drivers/irqchip/irq-armada-370-xp.c +++ b/drivers/irqchip/irq-armada-370-xp.c @@ -162,6 +162,15 @@ static void armada_370_xp_teardown_msi_irq(struct msi_chip *chip, armada_370_xp_free_msi(d->hwirq); } +static int armada_370_xp_check_msi_device(struct msi_chip *chip, struct pci_dev *dev, + int nvec, int type) +{ + /* We support MSI, but not MSI-X */ + if (type == PCI_CAP_ID_MSI) + return 0; + return -EINVAL; +} + static struct irq_chip armada_370_xp_msi_irq_chip = { .name = "armada_370_xp_msi_irq", .irq_enable = unmask_msi_irq, @@ -200,6 +209,7 @@ static int armada_370_xp_msi_init(struct device_node *node, msi_chip->setup_irq = armada_370_xp_setup_msi_irq; msi_chip->teardown_irq = armada_370_xp_teardown_msi_irq; + msi_chip->check_device = armada_370_xp_check_msi_device; msi_chip->of_node = node; armada_370_xp_msi_domain = -- cgit v1.2.1 From ff3c664505bf8a8334bca5045e87b85cfe4d2277 Mon Sep 17 00:00:00 2001 From: Neil Greatorex Date: Fri, 18 Apr 2014 14:19:49 +0200 Subject: irqchip: armada-370-xp: Fix releasing of MSIs Store the value of d->hwirq in a local variable as the real value is wiped out by calling irq_dispose_mapping. Without this patch, the armada_370_xp_free_msi function would always free MSI#0, no matter what was passed to it. Fixes: 31f614edb726fcc4d5aa0f2895fbdec9b04a3ca4 ('irqchip: armada-370-xp: implement MSI support') Cc: # v3.13+ Signed-off-by: Neil Greatorex Link: https://lkml.kernel.org/r/1397823593-1932-4-git-send-email-thomas.petazzoni@free-electrons.com Signed-off-by: Thomas Petazzoni Link: https://lkml.kernel.org/r/1397823593-1932-4-git-send-email-thomas.petazzoni@free-electrons.com Signed-off-by: Jason Cooper --- drivers/irqchip/irq-armada-370-xp.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/irqchip/irq-armada-370-xp.c b/drivers/irqchip/irq-armada-370-xp.c index 78b0ac9129d7..868d11bc00d2 100644 --- a/drivers/irqchip/irq-armada-370-xp.c +++ b/drivers/irqchip/irq-armada-370-xp.c @@ -158,8 +158,10 @@ static void armada_370_xp_teardown_msi_irq(struct msi_chip *chip, unsigned int irq) { struct irq_data *d = irq_get_irq_data(irq); + unsigned long hwirq = d->hwirq; + irq_dispose_mapping(irq); - armada_370_xp_free_msi(d->hwirq); + armada_370_xp_free_msi(hwirq); } static int armada_370_xp_check_msi_device(struct msi_chip *chip, struct pci_dev *dev, -- cgit v1.2.1 From 67c99a72e3006e4276e91d7282a3d6734fc77a0b Mon Sep 17 00:00:00 2001 From: "scameron@beardog.cce.hp.com" Date: Mon, 14 Apr 2014 14:01:09 -0500 Subject: [SCSI] hpsa: fix NULL dereference in hpsa_put_ctlr_into_performant_mode() Initialize local variable trans_support before it is used rather than after. It is supposed to contain the value of a register on the controller containing bits that describe which transport modes the controller supports (e.g. "performant", "ioaccel1", "ioaccel2"). A NULL pointer dereference will almost certainly occur if trans_support is not initialized at the right point. If for example the uninitialized trans_support value does not have the bit set for ioaccel2 support when it should be, then ioaccel2_alloc_cmds_and_bft() will not get called as it should be and the h->ioaccel2_blockFetchTable array will remain NULL instead of being allocated. Too late, trans_support finally gets initialized with the correct value with ioaccel2 mode bit set, which later causes calc_bucket_map() to be called to fill in h->ioaccel2_blockFetchTable[]. However h->ioaccel2_blockFetchTable is NULL because it didn't get allocated because earlier trans_support wasn't initialized at the right point. Fixes: e1f7de0cdd68d246d7008241cd9e443a54f880a8 Signed-off-by: Stephen M. Cameron Reported-by: Baoquan He Tested-by: Baoquan He Signed-off-by: James Bottomley --- drivers/scsi/hpsa.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/scsi/hpsa.c b/drivers/scsi/hpsa.c index 8cf4a0c69baf..9a6e4a2cd072 100644 --- a/drivers/scsi/hpsa.c +++ b/drivers/scsi/hpsa.c @@ -7463,6 +7463,10 @@ static void hpsa_put_ctlr_into_performant_mode(struct ctlr_info *h) if (hpsa_simple_mode) return; + trans_support = readl(&(h->cfgtable->TransportSupport)); + if (!(trans_support & PERFORMANT_MODE)) + return; + /* Check for I/O accelerator mode support */ if (trans_support & CFGTBL_Trans_io_accel1) { transMethod |= CFGTBL_Trans_io_accel1 | @@ -7479,10 +7483,6 @@ static void hpsa_put_ctlr_into_performant_mode(struct ctlr_info *h) } /* TODO, check that this next line h->nreply_queues is correct */ - trans_support = readl(&(h->cfgtable->TransportSupport)); - if (!(trans_support & PERFORMANT_MODE)) - return; - h->nreply_queues = h->msix_vector > 0 ? h->msix_vector : 1; hpsa_get_max_perf_mode_cmds(h); /* Performant mode ring buffer and supporting data structures */ -- cgit v1.2.1 From 5e012aad85f2ee31d7de5c21d63ccd2702d63db2 Mon Sep 17 00:00:00 2001 From: Christoph Hellwig Date: Tue, 15 Apr 2014 12:24:55 +0200 Subject: [SCSI] don't reference freed command in scsi_init_sgtable Patch commit 0479633686d370303e3430256ace4bd5f7f138dc Author: Christoph Hellwig Date: Thu Feb 20 14:20:55 2014 -0800 [SCSI] do not manipulate device reference counts in scsi_get/put_command Introduced a use after free: when scsi_init_io fails we have to release our device reference, but we do this trying to reference the just freed command. Add a local scsi_device pointer to fix this. Fixes: 0479633686d370303e3430256ace4bd5f7f138dc Reported-by: Sander Eikelenboom Signed-off-by: Christoph Hellwig Signed-off-by: James Bottomley --- drivers/scsi/scsi_lib.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/scsi/scsi_lib.c b/drivers/scsi/scsi_lib.c index 65a123d9c676..54eff6a79fb8 100644 --- a/drivers/scsi/scsi_lib.c +++ b/drivers/scsi/scsi_lib.c @@ -1044,6 +1044,7 @@ static int scsi_init_sgtable(struct request *req, struct scsi_data_buffer *sdb, */ int scsi_init_io(struct scsi_cmnd *cmd, gfp_t gfp_mask) { + struct scsi_device *sdev = cmd->device; struct request *rq = cmd->request; int error = scsi_init_sgtable(rq, &cmd->sdb, gfp_mask); @@ -1091,7 +1092,7 @@ err_exit: scsi_release_buffers(cmd); cmd->request->special = NULL; scsi_put_command(cmd); - put_device(&cmd->device->sdev_gendev); + put_device(&sdev->sdev_gendev); return error; } EXPORT_SYMBOL(scsi_init_io); -- cgit v1.2.1 From 68c03d9193f55dad93036f439b94912c5003a173 Mon Sep 17 00:00:00 2001 From: Christoph Hellwig Date: Tue, 15 Apr 2014 12:24:56 +0200 Subject: [SCSI] don't reference freed command in scsi_prep_return Patch commit 0479633686d370303e3430256ace4bd5f7f138dc Author: Christoph Hellwig Date: Thu Feb 20 14:20:55 2014 -0800 [SCSI] do not manipulate device reference counts in scsi_get/put_command Introduced a use after free:I in the kill case of scsi_prep_return we have to release our device reference, but we do this trying to reference the just freed command. Use the local sdev pointer instead. Fixes: 0479633686d370303e3430256ace4bd5f7f138dc Reported-by: Joe Lawrence Signed-off-by: Christoph Hellwig Signed-off-by: James Bottomley --- drivers/scsi/scsi_lib.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/scsi/scsi_lib.c b/drivers/scsi/scsi_lib.c index 54eff6a79fb8..7fa54fe51f63 100644 --- a/drivers/scsi/scsi_lib.c +++ b/drivers/scsi/scsi_lib.c @@ -1274,7 +1274,7 @@ int scsi_prep_return(struct request_queue *q, struct request *req, int ret) struct scsi_cmnd *cmd = req->special; scsi_release_buffers(cmd); scsi_put_command(cmd); - put_device(&cmd->device->sdev_gendev); + put_device(&sdev->sdev_gendev); req->special = NULL; } break; -- cgit v1.2.1 From 9189a330936fe053d48e14c10a8d90aaef4408c9 Mon Sep 17 00:00:00 2001 From: Felipe Balbi Date: Mon, 21 Apr 2014 10:15:12 -0500 Subject: Revert "usb: gadget: u_ether: move hardware transmit to RX NAPI" This reverts commit 716fb91dfe1777bd6d5e598f3d3572214b3ed296. That commit caused a regression which would end up in a kernel BUG() as below: [ 101.554300] g_ether gadget: full-speed config #1: CDC Subset/SAFE [ 101.585186] ------------[ cut here ]------------ [ 101.600587] kernel BUG at include/linux/netdevice.h:495! [ 101.615850] Internal error: Oops - BUG: 0 [#1] PREEMPT ARM [ 101.645539] Modules linked in: [ 101.660483] CPU: 0 PID: 0 Comm: swapper Not tainted 3.15.0-rc1+ #104 [ 101.690175] task: c05dc5c8 ti: c05d2000 task.ti: c05d2000 [ 101.705579] PC is at eth_start+0x64/0x8c [ 101.720981] LR is at __netif_schedule+0x7c/0x90 [ 101.736455] pc : [] lr : [] psr: 60000093 [ 101.736455] sp : c05d3d18 ip : c05d3cf8 fp : c05d3d2c [ 101.782340] r10: 00000000 r9 : c196c1f0 r8 : c196c1a0 [ 101.797823] r7 : 00000000 r6 : 00000002 r5 : c1976400 r4 : c1976400 [ 101.828058] r3 : 00000000 r2 : c05d3ce8 r1 : 00000001 r0 : 00000002 [ 101.858722] Flags: nZCv IRQs off FIQs on Mode SVC_32 ISA ARM Segment kernel Reported-by: Robert Jarzmik Signed-of-by: Felipe Balbi --- drivers/usb/gadget/u_ether.c | 101 +++++++++++++++---------------------------- 1 file changed, 35 insertions(+), 66 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/gadget/u_ether.c b/drivers/usb/gadget/u_ether.c index 50d09c289137..b7d4f82872b7 100644 --- a/drivers/usb/gadget/u_ether.c +++ b/drivers/usb/gadget/u_ether.c @@ -48,8 +48,6 @@ #define UETH__VERSION "29-May-2008" -#define GETHER_NAPI_WEIGHT 32 - struct eth_dev { /* lock is held while accessing port_usb */ @@ -74,7 +72,6 @@ struct eth_dev { struct sk_buff_head *list); struct work_struct work; - struct napi_struct rx_napi; unsigned long todo; #define WORK_RX_MEMORY 0 @@ -256,16 +253,18 @@ enomem: DBG(dev, "rx submit --> %d\n", retval); if (skb) dev_kfree_skb_any(skb); + spin_lock_irqsave(&dev->req_lock, flags); + list_add(&req->list, &dev->rx_reqs); + spin_unlock_irqrestore(&dev->req_lock, flags); } return retval; } static void rx_complete(struct usb_ep *ep, struct usb_request *req) { - struct sk_buff *skb = req->context; + struct sk_buff *skb = req->context, *skb2; struct eth_dev *dev = ep->driver_data; int status = req->status; - bool rx_queue = 0; switch (status) { @@ -289,8 +288,30 @@ static void rx_complete(struct usb_ep *ep, struct usb_request *req) } else { skb_queue_tail(&dev->rx_frames, skb); } - if (!status) - rx_queue = 1; + skb = NULL; + + skb2 = skb_dequeue(&dev->rx_frames); + while (skb2) { + if (status < 0 + || ETH_HLEN > skb2->len + || skb2->len > VLAN_ETH_FRAME_LEN) { + dev->net->stats.rx_errors++; + dev->net->stats.rx_length_errors++; + DBG(dev, "rx length %d\n", skb2->len); + dev_kfree_skb_any(skb2); + goto next_frame; + } + skb2->protocol = eth_type_trans(skb2, dev->net); + dev->net->stats.rx_packets++; + dev->net->stats.rx_bytes += skb2->len; + + /* no buffer copies needed, unless hardware can't + * use skb buffers. + */ + status = netif_rx(skb2); +next_frame: + skb2 = skb_dequeue(&dev->rx_frames); + } break; /* software-driven interface shutdown */ @@ -313,20 +334,22 @@ quiesce: /* FALLTHROUGH */ default: - rx_queue = 1; - dev_kfree_skb_any(skb); dev->net->stats.rx_errors++; DBG(dev, "rx status %d\n", status); break; } + if (skb) + dev_kfree_skb_any(skb); + if (!netif_running(dev->net)) { clean: spin_lock(&dev->req_lock); list_add(&req->list, &dev->rx_reqs); spin_unlock(&dev->req_lock); - - if (rx_queue && likely(napi_schedule_prep(&dev->rx_napi))) - __napi_schedule(&dev->rx_napi); + req = NULL; + } + if (req) + rx_submit(dev, req, GFP_ATOMIC); } static int prealloc(struct list_head *list, struct usb_ep *ep, unsigned n) @@ -391,24 +414,16 @@ static void rx_fill(struct eth_dev *dev, gfp_t gfp_flags) { struct usb_request *req; unsigned long flags; - int rx_counts = 0; /* fill unused rxq slots with some skb */ spin_lock_irqsave(&dev->req_lock, flags); while (!list_empty(&dev->rx_reqs)) { - - if (++rx_counts > qlen(dev->gadget, dev->qmult)) - break; - req = container_of(dev->rx_reqs.next, struct usb_request, list); list_del_init(&req->list); spin_unlock_irqrestore(&dev->req_lock, flags); if (rx_submit(dev, req, gfp_flags) < 0) { - spin_lock_irqsave(&dev->req_lock, flags); - list_add(&req->list, &dev->rx_reqs); - spin_unlock_irqrestore(&dev->req_lock, flags); defer_kevent(dev, WORK_RX_MEMORY); return; } @@ -418,41 +433,6 @@ static void rx_fill(struct eth_dev *dev, gfp_t gfp_flags) spin_unlock_irqrestore(&dev->req_lock, flags); } -static int gether_poll(struct napi_struct *napi, int budget) -{ - struct eth_dev *dev = container_of(napi, struct eth_dev, rx_napi); - struct sk_buff *skb; - unsigned int work_done = 0; - int status = 0; - - while ((skb = skb_dequeue(&dev->rx_frames))) { - if (status < 0 - || ETH_HLEN > skb->len - || skb->len > VLAN_ETH_FRAME_LEN) { - dev->net->stats.rx_errors++; - dev->net->stats.rx_length_errors++; - DBG(dev, "rx length %d\n", skb->len); - dev_kfree_skb_any(skb); - continue; - } - skb->protocol = eth_type_trans(skb, dev->net); - dev->net->stats.rx_packets++; - dev->net->stats.rx_bytes += skb->len; - - status = netif_rx_ni(skb); - } - - if (netif_running(dev->net)) { - rx_fill(dev, GFP_KERNEL); - work_done++; - } - - if (work_done < budget) - napi_complete(&dev->rx_napi); - - return work_done; -} - static void eth_work(struct work_struct *work) { struct eth_dev *dev = container_of(work, struct eth_dev, work); @@ -645,7 +625,6 @@ static void eth_start(struct eth_dev *dev, gfp_t gfp_flags) /* and open the tx floodgates */ atomic_set(&dev->tx_qlen, 0); netif_wake_queue(dev->net); - napi_enable(&dev->rx_napi); } static int eth_open(struct net_device *net) @@ -672,7 +651,6 @@ static int eth_stop(struct net_device *net) unsigned long flags; VDBG(dev, "%s\n", __func__); - napi_disable(&dev->rx_napi); netif_stop_queue(net); DBG(dev, "stop stats: rx/tx %ld/%ld, errs %ld/%ld\n", @@ -790,7 +768,6 @@ struct eth_dev *gether_setup_name(struct usb_gadget *g, return ERR_PTR(-ENOMEM); dev = netdev_priv(net); - netif_napi_add(net, &dev->rx_napi, gether_poll, GETHER_NAPI_WEIGHT); spin_lock_init(&dev->lock); spin_lock_init(&dev->req_lock); INIT_WORK(&dev->work, eth_work); @@ -853,7 +830,6 @@ struct net_device *gether_setup_name_default(const char *netname) return ERR_PTR(-ENOMEM); dev = netdev_priv(net); - netif_napi_add(net, &dev->rx_napi, gether_poll, GETHER_NAPI_WEIGHT); spin_lock_init(&dev->lock); spin_lock_init(&dev->req_lock); INIT_WORK(&dev->work, eth_work); @@ -1137,7 +1113,6 @@ void gether_disconnect(struct gether *link) { struct eth_dev *dev = link->ioport; struct usb_request *req; - struct sk_buff *skb; WARN_ON(!dev); if (!dev) @@ -1164,12 +1139,6 @@ void gether_disconnect(struct gether *link) spin_lock(&dev->req_lock); } spin_unlock(&dev->req_lock); - - spin_lock(&dev->rx_frames.lock); - while ((skb = __skb_dequeue(&dev->rx_frames))) - dev_kfree_skb_any(skb); - spin_unlock(&dev->rx_frames.lock); - link->in_ep->driver_data = NULL; link->in_ep->desc = NULL; -- cgit v1.2.1 From 2656c9e28125e96bee212f146cc3f2419fd3ffef Mon Sep 17 00:00:00 2001 From: Macpaul Lin Date: Tue, 15 Apr 2014 16:09:33 +0800 Subject: usb: gadget: f_rndis: reduce NETTX irq caused by free skb header This patch reduce unecessary NETTX softirq call caused by free skb header. You will see this softirq comes twice while there is only one TX packet to be transmitted. So using dev_kfree_skb() instead of dev_kfree_skb_any() to avoid this problem. Cc: David S. Miller Cc: Stephen Hemminger Cc: Greg Kroah-Hartman Signed-off-by: Macpaul Lin Signed-off-by: Felipe Balbi --- drivers/usb/gadget/f_rndis.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/usb/gadget/f_rndis.c b/drivers/usb/gadget/f_rndis.c index c11761ce5113..9a4f49dc6ac4 100644 --- a/drivers/usb/gadget/f_rndis.c +++ b/drivers/usb/gadget/f_rndis.c @@ -377,7 +377,7 @@ static struct sk_buff *rndis_add_header(struct gether *port, if (skb2) rndis_add_hdr(skb2); - dev_kfree_skb_any(skb); + dev_kfree_skb(skb); return skb2; } -- cgit v1.2.1 From a31a942a148e0083ce560ffeb54fb60e06ab7201 Mon Sep 17 00:00:00 2001 From: Daniel Mack Date: Wed, 16 Apr 2014 17:11:16 +0200 Subject: usb: phy: am335x-control: wait 1ms after power-up transitions Tests have shown that when a power-up transition is followed by other PHY operations too quickly, the USB port appears dead. Waiting 1ms fixes this problem. Signed-off-by: Daniel Mack Cc: stable@vger.kernel.org [3.14] Signed-off-by: Felipe Balbi --- drivers/usb/phy/phy-am335x-control.c | 9 +++++++++ 1 file changed, 9 insertions(+) (limited to 'drivers') diff --git a/drivers/usb/phy/phy-am335x-control.c b/drivers/usb/phy/phy-am335x-control.c index d75196ad5f2f..35b6083b7999 100644 --- a/drivers/usb/phy/phy-am335x-control.c +++ b/drivers/usb/phy/phy-am335x-control.c @@ -3,6 +3,7 @@ #include #include #include +#include #include "am35x-phy-control.h" struct am335x_control_usb { @@ -86,6 +87,14 @@ static void am335x_phy_power(struct phy_control *phy_ctrl, u32 id, bool on) } writel(val, usb_ctrl->phy_reg + reg); + + /* + * Give the PHY ~1ms to complete the power up operation. + * Tests have shown unstable behaviour if other USB PHY related + * registers are written too shortly after such a transition. + */ + if (on) + mdelay(1); } static const struct phy_control ctrl_am335x = { -- cgit v1.2.1 From 6273f00e6ecbd60494a979033b7e5271a29a0436 Mon Sep 17 00:00:00 2001 From: Lv Zheng Date: Wed, 16 Apr 2014 21:24:34 +0800 Subject: ACPICA: Fix buffer allocation issue for generic_serial_bus region accesses. The size of the buffer allocated for generic_serial_bus region access is not correct. This patch introduces acpi_ex_get_serial_access_length() to be invoked to obtain correct data buffer length. Signed-off-by: Lv Zheng Reported by: Lan Tianyu Acked-by: Lan Tianyu Signed-off-by: Rafael J. Wysocki --- drivers/acpi/acpica/exfield.c | 104 +++++++++++++++++++++++++++++++++++++++--- 1 file changed, 97 insertions(+), 7 deletions(-) (limited to 'drivers') diff --git a/drivers/acpi/acpica/exfield.c b/drivers/acpi/acpica/exfield.c index 68d97441432c..12878e1982f7 100644 --- a/drivers/acpi/acpica/exfield.c +++ b/drivers/acpi/acpica/exfield.c @@ -45,10 +45,71 @@ #include "accommon.h" #include "acdispat.h" #include "acinterp.h" +#include "amlcode.h" #define _COMPONENT ACPI_EXECUTER ACPI_MODULE_NAME("exfield") +/* Local prototypes */ +static u32 +acpi_ex_get_serial_access_length(u32 accessor_type, u32 access_length); + +/******************************************************************************* + * + * FUNCTION: acpi_get_serial_access_bytes + * + * PARAMETERS: accessor_type - The type of the protocol indicated by region + * field access attributes + * access_length - The access length of the region field + * + * RETURN: Decoded access length + * + * DESCRIPTION: This routine returns the length of the generic_serial_bus + * protocol bytes + * + ******************************************************************************/ + +static u32 +acpi_ex_get_serial_access_length(u32 accessor_type, u32 access_length) +{ + u32 length; + + switch (accessor_type) { + case AML_FIELD_ATTRIB_QUICK: + + length = 0; + break; + + case AML_FIELD_ATTRIB_SEND_RCV: + case AML_FIELD_ATTRIB_BYTE: + + length = 1; + break; + + case AML_FIELD_ATTRIB_WORD: + case AML_FIELD_ATTRIB_WORD_CALL: + + length = 2; + break; + + case AML_FIELD_ATTRIB_MULTIBYTE: + case AML_FIELD_ATTRIB_RAW_BYTES: + case AML_FIELD_ATTRIB_RAW_PROCESS: + + length = access_length; + break; + + case AML_FIELD_ATTRIB_BLOCK: + case AML_FIELD_ATTRIB_BLOCK_CALL: + default: + + length = ACPI_GSBUS_BUFFER_SIZE; + break; + } + + return (length); +} + /******************************************************************************* * * FUNCTION: acpi_ex_read_data_from_field @@ -63,8 +124,9 @@ ACPI_MODULE_NAME("exfield") * Buffer, depending on the size of the field. * ******************************************************************************/ + acpi_status -acpi_ex_read_data_from_field(struct acpi_walk_state *walk_state, +acpi_ex_read_data_from_field(struct acpi_walk_state * walk_state, union acpi_operand_object *obj_desc, union acpi_operand_object **ret_buffer_desc) { @@ -73,6 +135,7 @@ acpi_ex_read_data_from_field(struct acpi_walk_state *walk_state, acpi_size length; void *buffer; u32 function; + u16 accessor_type; ACPI_FUNCTION_TRACE_PTR(ex_read_data_from_field, obj_desc); @@ -116,9 +179,22 @@ acpi_ex_read_data_from_field(struct acpi_walk_state *walk_state, ACPI_READ | (obj_desc->field.attribute << 16); } else if (obj_desc->field.region_obj->region.space_id == ACPI_ADR_SPACE_GSBUS) { - length = ACPI_GSBUS_BUFFER_SIZE; - function = - ACPI_READ | (obj_desc->field.attribute << 16); + accessor_type = obj_desc->field.attribute; + length = acpi_ex_get_serial_access_length(accessor_type, + obj_desc-> + field. + access_length); + + /* + * Add additional 2 bytes for modeled generic_serial_bus data buffer: + * typedef struct { + * BYTEStatus; // Byte 0 of the data buffer + * BYTELength; // Byte 1 of the data buffer + * BYTE[x-1]Data; // Bytes 2-x of the arbitrary length data buffer, + * } + */ + length += 2; + function = ACPI_READ | (accessor_type << 16); } else { /* IPMI */ length = ACPI_IPMI_BUFFER_SIZE; @@ -231,6 +307,7 @@ acpi_ex_write_data_to_field(union acpi_operand_object *source_desc, void *buffer; union acpi_operand_object *buffer_desc; u32 function; + u16 accessor_type; ACPI_FUNCTION_TRACE_PTR(ex_write_data_to_field, obj_desc); @@ -284,9 +361,22 @@ acpi_ex_write_data_to_field(union acpi_operand_object *source_desc, ACPI_WRITE | (obj_desc->field.attribute << 16); } else if (obj_desc->field.region_obj->region.space_id == ACPI_ADR_SPACE_GSBUS) { - length = ACPI_GSBUS_BUFFER_SIZE; - function = - ACPI_WRITE | (obj_desc->field.attribute << 16); + accessor_type = obj_desc->field.attribute; + length = acpi_ex_get_serial_access_length(accessor_type, + obj_desc-> + field. + access_length); + + /* + * Add additional 2 bytes for modeled generic_serial_bus data buffer: + * typedef struct { + * BYTEStatus; // Byte 0 of the data buffer + * BYTELength; // Byte 1 of the data buffer + * BYTE[x-1]Data; // Bytes 2-x of the arbitrary length data buffer, + * } + */ + length += 2; + function = ACPI_WRITE | (accessor_type << 16); } else { /* IPMI */ length = ACPI_IPMI_BUFFER_SIZE; -- cgit v1.2.1 From d555a2abf3481f81303d835046a5ec2c4fb3ca8e Mon Sep 17 00:00:00 2001 From: James Bottomley Date: Fri, 28 Mar 2014 10:50:17 -0700 Subject: [SCSI] Fix spurious request sense in error handling We unconditionally execute scsi_eh_get_sense() to make sure all failed commands that should have sense attached, do. However, the routine forgets that some commands, because of the way they fail, will not have any sense code ... we should not bother them with a REQUEST_SENSE command. Fix this by testing to see if we actually got a CHECK_CONDITION return and skip asking for sense if we don't. Tested-by: Alan Stern Signed-off-by: James Bottomley --- drivers/scsi/scsi_error.c | 9 +++++++++ 1 file changed, 9 insertions(+) (limited to 'drivers') diff --git a/drivers/scsi/scsi_error.c b/drivers/scsi/scsi_error.c index 771c16bfdbac..d020149ea8d4 100644 --- a/drivers/scsi/scsi_error.c +++ b/drivers/scsi/scsi_error.c @@ -1157,6 +1157,15 @@ int scsi_eh_get_sense(struct list_head *work_q, __func__)); break; } + if (status_byte(scmd->result) != CHECK_CONDITION) + /* + * don't request sense if there's no check condition + * status because the error we're processing isn't one + * that has a sense code (and some devices get + * confused by sense requests out of the blue) + */ + continue; + SCSI_LOG_ERROR_RECOVERY(2, scmd_printk(KERN_INFO, scmd, "%s: requesting sense\n", current->comm)); -- cgit v1.2.1 From 644373a4219add42123df69c8b7ce6a918475ccd Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Fri, 28 Mar 2014 10:51:15 -0700 Subject: [SCSI] Fix command result state propagation We're seeing a case where the contents of scmd->result isn't being reset after a SCSI command encounters an error, is resubmitted, times out and then gets handled. The error handler acts on the stale result of the previous error instead of the timeout. Fix this by properly zeroing the scmd->status before the command is resubmitted. Signed-off-by: Alan Stern Signed-off-by: James Bottomley --- drivers/scsi/scsi_error.c | 1 + drivers/scsi/scsi_lib.c | 1 + 2 files changed, 2 insertions(+) (limited to 'drivers') diff --git a/drivers/scsi/scsi_error.c b/drivers/scsi/scsi_error.c index d020149ea8d4..2953bfa92da7 100644 --- a/drivers/scsi/scsi_error.c +++ b/drivers/scsi/scsi_error.c @@ -924,6 +924,7 @@ void scsi_eh_prep_cmnd(struct scsi_cmnd *scmd, struct scsi_eh_save *ses, memset(scmd->cmnd, 0, BLK_MAX_CDB); memset(&scmd->sdb, 0, sizeof(scmd->sdb)); scmd->request->next_rq = NULL; + scmd->result = 0; if (sense_bytes) { scmd->sdb.length = min_t(unsigned, SCSI_SENSE_BUFFERSIZE, diff --git a/drivers/scsi/scsi_lib.c b/drivers/scsi/scsi_lib.c index 7fa54fe51f63..9db097a28a74 100644 --- a/drivers/scsi/scsi_lib.c +++ b/drivers/scsi/scsi_lib.c @@ -137,6 +137,7 @@ static void __scsi_queue_insert(struct scsi_cmnd *cmd, int reason, int unbusy) * lock such that the kblockd_schedule_work() call happens * before blk_cleanup_queue() finishes. */ + cmd->result = 0; spin_lock_irqsave(q->queue_lock, flags); blk_requeue_request(q, cmd->request); kblockd_schedule_work(q, &device->requeue_work); -- cgit v1.2.1 From 7daf480483e60898f30e0a2a84fecada7a7cfac0 Mon Sep 17 00:00:00 2001 From: Hannes Reinecke Date: Mon, 31 Mar 2014 16:37:34 +0200 Subject: [SCSI] Fix USB deadlock caused by SCSI error handling USB requires that every command be aborted first before we escalate to reset. In particular, USB will deadlock if we try to reset first before aborting the command. Unfortunately, the flag we use to tell if a command has already been aborted: SCSI_EH_ABORT_SCHEDULED is not cleared properly leading to cases where we can requeue a command with the flag set and proceed immediately to reset if it fails (thus causing USB to deadlock). Fix by clearing the SCSI_EH_ABORT_SCHEDULED flag if it has been set. Which means this will be the second time scsi_abort_command() has been called for the same command. IE the first abort went out, did its thing, but now the same command has timed out again. So this flag gets cleared, and scsi_abort_command() returns FAILED, and _no_ asynchronous abort is being scheduled. scsi_times_out() will then proceed to call scsi_eh_scmd_add(). But as we've cleared the SCSI_EH_ABORT_SCHEDULED flag the SCSI_EH_CANCEL_CMD flag will continue to be set, and the command will be aborted with the main SCSI EH routine. Reported-by: Alan Stern Tested-by: Andreas Reis Signed-off-by: Hannes Reinecke Signed-off-by: James Bottomley --- drivers/scsi/scsi_error.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/scsi/scsi_error.c b/drivers/scsi/scsi_error.c index 2953bfa92da7..ad064d2d730b 100644 --- a/drivers/scsi/scsi_error.c +++ b/drivers/scsi/scsi_error.c @@ -189,6 +189,7 @@ scsi_abort_command(struct scsi_cmnd *scmd) /* * Retry after abort failed, escalate to next level. */ + scmd->eh_eflags &= ~SCSI_EH_ABORT_SCHEDULED; SCSI_LOG_ERROR_RECOVERY(3, scmd_printk(KERN_INFO, scmd, "scmd %p previous abort failed\n", scmd)); -- cgit v1.2.1 From c69e6f812bab0d5442b40e2f1bfbca48d40bc50b Mon Sep 17 00:00:00 2001 From: James Bottomley Date: Thu, 10 Apr 2014 13:36:11 -0700 Subject: [SCSI] More USB deadlock fixes This patch fixes a corner case in the previous USB Deadlock fix patch (12023e7 [SCSI] Fix USB deadlock caused by SCSI error handling). The scenario is abort command, set flag, abort completes, send TUR, TUR doesn't return, so we now try to abort the TUR, but scsi_abort_eh_cmnd() will skip the abort because the flag is set and move straight to reset. Reviewed-by: Hannes Reinecke Signed-off-by: James Bottomley --- drivers/scsi/scsi_error.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/scsi/scsi_error.c b/drivers/scsi/scsi_error.c index ad064d2d730b..f17aa7aa7879 100644 --- a/drivers/scsi/scsi_error.c +++ b/drivers/scsi/scsi_error.c @@ -921,6 +921,7 @@ void scsi_eh_prep_cmnd(struct scsi_cmnd *scmd, struct scsi_eh_save *ses, ses->prot_op = scmd->prot_op; scmd->prot_op = SCSI_PROT_NORMAL; + scmd->eh_eflags = 0; scmd->cmnd = ses->eh_cmnd; memset(scmd->cmnd, 0, BLK_MAX_CDB); memset(&scmd->sdb, 0, sizeof(scmd->sdb)); -- cgit v1.2.1 From d27dca4217eb4cbdc3d33ad8c07799dd184873b9 Mon Sep 17 00:00:00 2001 From: Christoph Jaeger Date: Sat, 12 Apr 2014 19:57:30 +0200 Subject: intel_idle: fix IVT idle state table setting Ivy Town idle state table will not be set as intended. Fix it. Picked up by Coverity - CID 1201420/1201421. Fixes: 0138d8f075 ("intel_idle: fine-tune IVT residency targets") Signed-off-by: Christoph Jaeger Signed-off-by: Rafael J. Wysocki --- drivers/idle/intel_idle.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/idle/intel_idle.c b/drivers/idle/intel_idle.c index a43220c2e3d9..4d140bbbe100 100644 --- a/drivers/idle/intel_idle.c +++ b/drivers/idle/intel_idle.c @@ -750,9 +750,10 @@ void intel_idle_state_table_update(void) if (package_num + 1 > num_sockets) { num_sockets = package_num + 1; - if (num_sockets > 4) + if (num_sockets > 4) { cpuidle_state_table = ivt_cstates_8s; return; + } } } -- cgit v1.2.1 From 8ab4e2b30a0921d819b196d34ce58f19c3e0270b Mon Sep 17 00:00:00 2001 From: Duan Jiong Date: Fri, 11 Apr 2014 15:59:38 +0800 Subject: cpufreq: unicore32: replace IS_ERR and PTR_ERR with PTR_ERR_OR_ZERO This patch fixes coccinelle error regarding usage of IS_ERR and PTR_ERR instead of PTR_ERR_OR_ZERO. Signed-off-by: Duan Jiong Acked-by: Viresh Kumar Signed-off-by: Rafael J. Wysocki --- drivers/cpufreq/unicore2-cpufreq.c | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/cpufreq/unicore2-cpufreq.c b/drivers/cpufreq/unicore2-cpufreq.c index 8d045afa7fb4..6f9dfa80563a 100644 --- a/drivers/cpufreq/unicore2-cpufreq.c +++ b/drivers/cpufreq/unicore2-cpufreq.c @@ -60,9 +60,7 @@ static int __init ucv2_cpu_init(struct cpufreq_policy *policy) policy->max = policy->cpuinfo.max_freq = 1000000; policy->cpuinfo.transition_latency = CPUFREQ_ETERNAL; policy->clk = clk_get(NULL, "MAIN_CLK"); - if (IS_ERR(policy->clk)) - return PTR_ERR(policy->clk); - return 0; + return PTR_ERR_OR_ZERO(policy->clk); } static struct cpufreq_driver ucv2_driver = { -- cgit v1.2.1 From f3cae355a962784101478504ef7f6a389ad62979 Mon Sep 17 00:00:00 2001 From: "Srivatsa S. Bhat" Date: Wed, 16 Apr 2014 11:35:38 +0530 Subject: cpufreq, powernv: Fix build failure on UP Paul Gortmaker reported the following build failure of the powernv cpufreq driver on UP configs: drivers/cpufreq/powernv-cpufreq.c:241:2: error: implicit declaration of function 'cpu_sibling_mask' [-Werror=implicit-function-declaration] cc1: some warnings being treated as errors make[3]: *** [drivers/cpufreq/powernv-cpufreq.o] Error 1 make[2]: *** [drivers/cpufreq] Error 2 make[1]: *** [drivers] Error 2 make: *** [sub-make] Error 2 The trouble here is that cpu_sibling_mask is defined only in , and includes only in SMP builds. So fix this build failure by explicitly including in the driver, so that we get the definition of cpu_sibling_mask even in UP configurations. Reported-by: Paul Gortmaker Signed-off-by: Srivatsa S. Bhat Acked-by: Viresh Kumar Signed-off-by: Rafael J. Wysocki --- drivers/cpufreq/powernv-cpufreq.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/cpufreq/powernv-cpufreq.c b/drivers/cpufreq/powernv-cpufreq.c index 9edccc63245d..af4968813e76 100644 --- a/drivers/cpufreq/powernv-cpufreq.c +++ b/drivers/cpufreq/powernv-cpufreq.c @@ -29,6 +29,7 @@ #include #include +#include /* Required for cpu_sibling_mask() in UP configs */ #define POWERNV_MAX_PSTATES 256 -- cgit v1.2.1 From 1612343a264b2791f4602f4b47dac853e0892ec0 Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Thu, 17 Apr 2014 11:53:26 +0200 Subject: cpufreq: ppc: Fix integer overflow in expression On 32-bit, "12 * NSEC_PER_SEC" doesn't fit in "unsigned long" (NSEC_PER_SEC is a "long" constant), causing an integer overflow: drivers/cpufreq/ppc-corenet-cpufreq.c: In function 'corenet_cpufreq_cpu_init': drivers/cpufreq/ppc-corenet-cpufreq.c:211:9: warning: integer overflow in expression [-Woverflow] Force the intermediate to be 64-bit by adding an "ULL" suffix to the constant multiplier to fix this. Signed-off-by: Geert Uytterhoeven Acked-by: Viresh Kumar Signed-off-by: Rafael J. Wysocki --- drivers/cpufreq/ppc-corenet-cpufreq.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/cpufreq/ppc-corenet-cpufreq.c b/drivers/cpufreq/ppc-corenet-cpufreq.c index b7e677be1df0..a1ca3dd04a8e 100644 --- a/drivers/cpufreq/ppc-corenet-cpufreq.c +++ b/drivers/cpufreq/ppc-corenet-cpufreq.c @@ -206,7 +206,7 @@ static int corenet_cpufreq_cpu_init(struct cpufreq_policy *policy) per_cpu(cpu_data, i) = data; policy->cpuinfo.transition_latency = - (12 * NSEC_PER_SEC) / fsl_get_sys_freq(); + (12ULL * NSEC_PER_SEC) / fsl_get_sys_freq(); of_node_put(np); return 0; -- cgit v1.2.1 From d76ae2eabca5ff112bb58de8a7d52b70f8bb0608 Mon Sep 17 00:00:00 2001 From: Kefeng Wang Date: Wed, 9 Apr 2014 10:34:33 +0800 Subject: cpufreq: highbank: fix ARM_HIGHBANK_CPUFREQ dependency warning When make ARCH=arm multi_v7_defconfig, we get the following warnings: warning: (ARM_HIGHBANK_CPUFREQ) selects GENERIC_CPUFREQ_CPU0 which has unmet direct dependencies (ARCH_HAS_CPUFREQ && CPU_FREQ && HAVE_CLK && REGULATOR && OF && THERMAL && CPU_THERMAL) To fix this, make ARM_HIGHBANK_CPUFREQ depend on ARCH_HAS_CPUFREQ and REGULATOR instead of selecting them, PM_OPP will be selected by ARCH_HAS_CPUFREQ. Signed-off-by: Kefeng Wang Acked-by: Viresh Kumar Signed-off-by: Rafael J. Wysocki --- drivers/cpufreq/Kconfig.arm | 6 +----- 1 file changed, 1 insertion(+), 5 deletions(-) (limited to 'drivers') diff --git a/drivers/cpufreq/Kconfig.arm b/drivers/cpufreq/Kconfig.arm index 0e9cce82844b..580503513f0f 100644 --- a/drivers/cpufreq/Kconfig.arm +++ b/drivers/cpufreq/Kconfig.arm @@ -92,11 +92,7 @@ config ARM_EXYNOS_CPU_FREQ_BOOST_SW config ARM_HIGHBANK_CPUFREQ tristate "Calxeda Highbank-based" - depends on ARCH_HIGHBANK - select GENERIC_CPUFREQ_CPU0 - select PM_OPP - select REGULATOR - + depends on ARCH_HIGHBANK && GENERIC_CPUFREQ_CPU0 && REGULATOR default m help This adds the CPUFreq driver for Calxeda Highbank SoC -- cgit v1.2.1 From ad47b8fa5a679b7acaae831635e40d2e4887e9e7 Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Tue, 22 Apr 2014 02:02:06 -0400 Subject: drm/radeon/aux: fix hpd assignment for aux bus MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The hpd (hot plug detect) pin assignment got lost in the conversion to to the common i2c over aux code. Without this information, aux transactions do not work properly. Fixes DP failures. Signed-off-by: Alex Deucher Signed-off-by: Christian König --- drivers/gpu/drm/radeon/atombios_dp.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/gpu/drm/radeon/atombios_dp.c b/drivers/gpu/drm/radeon/atombios_dp.c index 15936524f226..bc0119fb6c12 100644 --- a/drivers/gpu/drm/radeon/atombios_dp.c +++ b/drivers/gpu/drm/radeon/atombios_dp.c @@ -209,6 +209,7 @@ void radeon_dp_aux_init(struct radeon_connector *radeon_connector) { int ret; + radeon_connector->ddc_bus->rec.hpd = radeon_connector->hpd.hpd; radeon_connector->ddc_bus->aux.dev = radeon_connector->base.kdev; radeon_connector->ddc_bus->aux.transfer = radeon_dp_aux_transfer; ret = drm_dp_aux_register_i2c_bus(&radeon_connector->ddc_bus->aux); -- cgit v1.2.1 From 40478455fefdc0bde24ae872c3f88d58a1b0e435 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Ville=20Syrj=C3=A4l=C3=A4?= Date: Thu, 27 Mar 2014 11:08:45 +0200 Subject: drm/i915: Allow user modes to exceed DVI 165MHz limit MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit In commit commit 6375b768a9850b6154478993e5fb566fa4614a9c Author: Ville Syrjälä Date: Mon Mar 3 11:33:36 2014 +0200 drm/i915: Reject >165MHz modes w/ DVI monitors the driver started to filter out display modes which exceed the single-link DVI 165Mz dotclock limits when the monitor doesn't report itself as being HDMI compliant. The intent was to filter out all EDID derived modes that require dual-link DVI to operate since we don't support dual-link. However the patch went a bit too far and also causes the driver to reject such modes even when specified by the user. Normally we don't check the sink limitations when setting a mode from the user. This allows the user to specify any mode whether the sink reports to support it or not. This can be useful since often the sinks support more modes than they report in the EDID. So relax the checks a bit, and apply the single-link DVI dotclock limit only when filtering the mode list, and ignore the limit when setting a user specified mode. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=72961 Tested-by: Nicholas Vinson Cc: stable@vger.kernel.org [3.14] Reviewed-by: Daniel Vetter Signed-off-by: Ville Syrjälä Signed-off-by: Jani Nikula --- drivers/gpu/drm/i915/intel_hdmi.c | 9 +++++---- 1 file changed, 5 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/i915/intel_hdmi.c b/drivers/gpu/drm/i915/intel_hdmi.c index b0413e190625..157267aa3561 100644 --- a/drivers/gpu/drm/i915/intel_hdmi.c +++ b/drivers/gpu/drm/i915/intel_hdmi.c @@ -821,11 +821,11 @@ static void intel_disable_hdmi(struct intel_encoder *encoder) } } -static int hdmi_portclock_limit(struct intel_hdmi *hdmi) +static int hdmi_portclock_limit(struct intel_hdmi *hdmi, bool respect_dvi_limit) { struct drm_device *dev = intel_hdmi_to_dev(hdmi); - if (!hdmi->has_hdmi_sink || IS_G4X(dev)) + if ((respect_dvi_limit && !hdmi->has_hdmi_sink) || IS_G4X(dev)) return 165000; else if (IS_HASWELL(dev) || INTEL_INFO(dev)->gen >= 8) return 300000; @@ -837,7 +837,8 @@ static enum drm_mode_status intel_hdmi_mode_valid(struct drm_connector *connector, struct drm_display_mode *mode) { - if (mode->clock > hdmi_portclock_limit(intel_attached_hdmi(connector))) + if (mode->clock > hdmi_portclock_limit(intel_attached_hdmi(connector), + true)) return MODE_CLOCK_HIGH; if (mode->clock < 20000) return MODE_CLOCK_LOW; @@ -879,7 +880,7 @@ bool intel_hdmi_compute_config(struct intel_encoder *encoder, struct drm_device *dev = encoder->base.dev; struct drm_display_mode *adjusted_mode = &pipe_config->adjusted_mode; int clock_12bpc = pipe_config->adjusted_mode.crtc_clock * 3 / 2; - int portclock_limit = hdmi_portclock_limit(intel_hdmi); + int portclock_limit = hdmi_portclock_limit(intel_hdmi, false); int desired_bpp; if (intel_hdmi->color_range_auto) { -- cgit v1.2.1 From 7e95cfb0b797678cd3493ca0322ef2675547a0bc Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Tue, 22 Apr 2014 08:17:18 -0400 Subject: drm/radeon: fix count in cik_sdma_ring_test() MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Should be 5 rather than 4. Noticed-by: Mathias Fröhlich Signed-off-by: Alex Deucher Cc: stable@vger.kernel.org Signed-off-by: Christian König --- drivers/gpu/drm/radeon/cik_sdma.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/radeon/cik_sdma.c b/drivers/gpu/drm/radeon/cik_sdma.c index 89b4afa5041c..f7e46cf682af 100644 --- a/drivers/gpu/drm/radeon/cik_sdma.c +++ b/drivers/gpu/drm/radeon/cik_sdma.c @@ -597,7 +597,7 @@ int cik_sdma_ring_test(struct radeon_device *rdev, tmp = 0xCAFEDEAD; writel(tmp, ptr); - r = radeon_ring_lock(rdev, ring, 4); + r = radeon_ring_lock(rdev, ring, 5); if (r) { DRM_ERROR("radeon: dma failed to lock ring %d (%d).\n", ring->idx, r); return r; -- cgit v1.2.1 From 4c5fba3d4ae3a7aae2c4a56d4a234aa556b7caca Mon Sep 17 00:00:00 2001 From: Christian Ruppert Date: Fri, 11 Apr 2014 16:46:04 +0200 Subject: pinctrl/TB10x: Fix signedness bug In the TB10x pin database, a port index of -1 is used to indicate unmuxed GPIO pin groups. This bug fixes a 'cast to unsigned' bug of this value. Thanks to Dan Carpenter for highlighting this. CC: Dan Carpenter Signed-off-by: Christian Ruppert Signed-off-by: Linus Walleij --- drivers/pinctrl/pinctrl-tb10x.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/pinctrl/pinctrl-tb10x.c b/drivers/pinctrl/pinctrl-tb10x.c index c5e0f6973a3b..26ca6855f478 100644 --- a/drivers/pinctrl/pinctrl-tb10x.c +++ b/drivers/pinctrl/pinctrl-tb10x.c @@ -629,9 +629,8 @@ static int tb10x_gpio_request_enable(struct pinctrl_dev *pctl, */ for (i = 0; i < state->pinfuncgrpcnt; i++) { const struct tb10x_pinfuncgrp *pfg = &state->pingroups[i]; - unsigned int port = pfg->port; unsigned int mode = pfg->mode; - int j; + int j, port = pfg->port; /* * Skip pin groups which are always mapped and don't need -- cgit v1.2.1 From cb3e4e7c59e4b43ac378631f6101f5c8de3a27a5 Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Tue, 15 Apr 2014 12:44:32 -0400 Subject: drm/radeon: properly unregister hwmon interface (v2) Need to properly unregister the hwmon device on driver unload. v2: minor clean up bug: https://bugzilla.kernel.org/show_bug.cgi?id=73931 Signed-off-by: Alex Deucher Cc: stable@vger.kernel.org --- drivers/gpu/drm/radeon/radeon_pm.c | 21 +++++++++++++++------ 1 file changed, 15 insertions(+), 6 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/radeon/radeon_pm.c b/drivers/gpu/drm/radeon/radeon_pm.c index 0c4473db8501..d79895aebc59 100644 --- a/drivers/gpu/drm/radeon/radeon_pm.c +++ b/drivers/gpu/drm/radeon/radeon_pm.c @@ -603,7 +603,6 @@ static const struct attribute_group *hwmon_groups[] = { static int radeon_hwmon_init(struct radeon_device *rdev) { int err = 0; - struct device *hwmon_dev; switch (rdev->pm.int_thermal_type) { case THERMAL_TYPE_RV6XX: @@ -616,11 +615,11 @@ static int radeon_hwmon_init(struct radeon_device *rdev) case THERMAL_TYPE_KV: if (rdev->asic->pm.get_temperature == NULL) return err; - hwmon_dev = hwmon_device_register_with_groups(rdev->dev, - "radeon", rdev, - hwmon_groups); - if (IS_ERR(hwmon_dev)) { - err = PTR_ERR(hwmon_dev); + rdev->pm.int_hwmon_dev = hwmon_device_register_with_groups(rdev->dev, + "radeon", rdev, + hwmon_groups); + if (IS_ERR(rdev->pm.int_hwmon_dev)) { + err = PTR_ERR(rdev->pm.int_hwmon_dev); dev_err(rdev->dev, "Unable to register hwmon device: %d\n", err); } @@ -632,6 +631,12 @@ static int radeon_hwmon_init(struct radeon_device *rdev) return err; } +static void radeon_hwmon_fini(struct radeon_device *rdev) +{ + if (rdev->pm.int_hwmon_dev) + hwmon_device_unregister(rdev->pm.int_hwmon_dev); +} + static void radeon_dpm_thermal_work_handler(struct work_struct *work) { struct radeon_device *rdev = @@ -1353,6 +1358,8 @@ static void radeon_pm_fini_old(struct radeon_device *rdev) device_remove_file(rdev->dev, &dev_attr_power_method); } + radeon_hwmon_fini(rdev); + if (rdev->pm.power_state) kfree(rdev->pm.power_state); } @@ -1372,6 +1379,8 @@ static void radeon_pm_fini_dpm(struct radeon_device *rdev) } radeon_dpm_fini(rdev); + radeon_hwmon_fini(rdev); + if (rdev->pm.power_state) kfree(rdev->pm.power_state); } -- cgit v1.2.1 From 3ed9a335cfc64b2c83545f341cdddf2347b12b97 Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Tue, 15 Apr 2014 12:44:33 -0400 Subject: drm/radeon/pm: don't walk the crtc list before it has been initialized (v2) Avoids a crash in certain cases when thermal irqs are generated before the display structures have been initialized. v2: fix the vblank and vrefresh helpers as well bug: https://bugzilla.kernel.org/show_bug.cgi?id=73931 Signed-off-by: Alex Deucher Cc: stable@vger.kernel.org --- drivers/gpu/drm/radeon/r600_dpm.c | 35 +++++++++++++++++++---------------- drivers/gpu/drm/radeon/radeon_pm.c | 28 ++++++++++++++++------------ 2 files changed, 35 insertions(+), 28 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/radeon/r600_dpm.c b/drivers/gpu/drm/radeon/r600_dpm.c index cbf7e3269f84..9c61b74ef441 100644 --- a/drivers/gpu/drm/radeon/r600_dpm.c +++ b/drivers/gpu/drm/radeon/r600_dpm.c @@ -158,16 +158,18 @@ u32 r600_dpm_get_vblank_time(struct radeon_device *rdev) u32 line_time_us, vblank_lines; u32 vblank_time_us = 0xffffffff; /* if the displays are off, vblank time is max */ - list_for_each_entry(crtc, &dev->mode_config.crtc_list, head) { - radeon_crtc = to_radeon_crtc(crtc); - if (crtc->enabled && radeon_crtc->enabled && radeon_crtc->hw_mode.clock) { - line_time_us = (radeon_crtc->hw_mode.crtc_htotal * 1000) / - radeon_crtc->hw_mode.clock; - vblank_lines = radeon_crtc->hw_mode.crtc_vblank_end - - radeon_crtc->hw_mode.crtc_vdisplay + - (radeon_crtc->v_border * 2); - vblank_time_us = vblank_lines * line_time_us; - break; + if (rdev->num_crtc && rdev->mode_info.mode_config_initialized) { + list_for_each_entry(crtc, &dev->mode_config.crtc_list, head) { + radeon_crtc = to_radeon_crtc(crtc); + if (crtc->enabled && radeon_crtc->enabled && radeon_crtc->hw_mode.clock) { + line_time_us = (radeon_crtc->hw_mode.crtc_htotal * 1000) / + radeon_crtc->hw_mode.clock; + vblank_lines = radeon_crtc->hw_mode.crtc_vblank_end - + radeon_crtc->hw_mode.crtc_vdisplay + + (radeon_crtc->v_border * 2); + vblank_time_us = vblank_lines * line_time_us; + break; + } } } @@ -181,14 +183,15 @@ u32 r600_dpm_get_vrefresh(struct radeon_device *rdev) struct radeon_crtc *radeon_crtc; u32 vrefresh = 0; - list_for_each_entry(crtc, &dev->mode_config.crtc_list, head) { - radeon_crtc = to_radeon_crtc(crtc); - if (crtc->enabled && radeon_crtc->enabled && radeon_crtc->hw_mode.clock) { - vrefresh = radeon_crtc->hw_mode.vrefresh; - break; + if (rdev->num_crtc && rdev->mode_info.mode_config_initialized) { + list_for_each_entry(crtc, &dev->mode_config.crtc_list, head) { + radeon_crtc = to_radeon_crtc(crtc); + if (crtc->enabled && radeon_crtc->enabled && radeon_crtc->hw_mode.clock) { + vrefresh = radeon_crtc->hw_mode.vrefresh; + break; + } } } - return vrefresh; } diff --git a/drivers/gpu/drm/radeon/radeon_pm.c b/drivers/gpu/drm/radeon/radeon_pm.c index d79895aebc59..6fac8efe8340 100644 --- a/drivers/gpu/drm/radeon/radeon_pm.c +++ b/drivers/gpu/drm/radeon/radeon_pm.c @@ -1406,12 +1406,14 @@ static void radeon_pm_compute_clocks_old(struct radeon_device *rdev) rdev->pm.active_crtcs = 0; rdev->pm.active_crtc_count = 0; - list_for_each_entry(crtc, - &ddev->mode_config.crtc_list, head) { - radeon_crtc = to_radeon_crtc(crtc); - if (radeon_crtc->enabled) { - rdev->pm.active_crtcs |= (1 << radeon_crtc->crtc_id); - rdev->pm.active_crtc_count++; + if (rdev->num_crtc && rdev->mode_info.mode_config_initialized) { + list_for_each_entry(crtc, + &ddev->mode_config.crtc_list, head) { + radeon_crtc = to_radeon_crtc(crtc); + if (radeon_crtc->enabled) { + rdev->pm.active_crtcs |= (1 << radeon_crtc->crtc_id); + rdev->pm.active_crtc_count++; + } } } @@ -1478,12 +1480,14 @@ static void radeon_pm_compute_clocks_dpm(struct radeon_device *rdev) /* update active crtc counts */ rdev->pm.dpm.new_active_crtcs = 0; rdev->pm.dpm.new_active_crtc_count = 0; - list_for_each_entry(crtc, - &ddev->mode_config.crtc_list, head) { - radeon_crtc = to_radeon_crtc(crtc); - if (crtc->enabled) { - rdev->pm.dpm.new_active_crtcs |= (1 << radeon_crtc->crtc_id); - rdev->pm.dpm.new_active_crtc_count++; + if (rdev->num_crtc && rdev->mode_info.mode_config_initialized) { + list_for_each_entry(crtc, + &ddev->mode_config.crtc_list, head) { + radeon_crtc = to_radeon_crtc(crtc); + if (crtc->enabled) { + rdev->pm.dpm.new_active_crtcs |= (1 << radeon_crtc->crtc_id); + rdev->pm.dpm.new_active_crtc_count++; + } } } -- cgit v1.2.1 From e9a4099a59cc598a44006059dd775c25e422b772 Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Tue, 15 Apr 2014 12:44:34 -0400 Subject: drm/radeon: fix ATPX detection on non-VGA GPUs MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Some newer PX laptops have the pci device class set to DISPLAY_OTHER rather than DISPLAY_VGA. This properly detects ATPX on those laptops. Based on a patch from: Pali Rohár Signed-off-by: Alex Deucher Cc: stable@vger.kernel.org Cc: airlied@gmail.com --- drivers/gpu/drm/radeon/radeon_atpx_handler.c | 7 +++++++ 1 file changed, 7 insertions(+) (limited to 'drivers') diff --git a/drivers/gpu/drm/radeon/radeon_atpx_handler.c b/drivers/gpu/drm/radeon/radeon_atpx_handler.c index dedea72f48c4..a9fb0d016d38 100644 --- a/drivers/gpu/drm/radeon/radeon_atpx_handler.c +++ b/drivers/gpu/drm/radeon/radeon_atpx_handler.c @@ -528,6 +528,13 @@ static bool radeon_atpx_detect(void) has_atpx |= (radeon_atpx_pci_probe_handle(pdev) == true); } + /* some newer PX laptops mark the dGPU as a non-VGA display device */ + while ((pdev = pci_get_class(PCI_CLASS_DISPLAY_OTHER << 8, pdev)) != NULL) { + vga_count++; + + has_atpx |= (radeon_atpx_pci_probe_handle(pdev) == true); + } + if (has_atpx && vga_count == 2) { acpi_get_name(radeon_atpx_priv.atpx.handle, ACPI_FULL_PATHNAME, &buffer); printk(KERN_INFO "VGA switcheroo: detected switching method %s handle\n", -- cgit v1.2.1 From 73acacc7397fe854ed2ab75f1c940fa00faaf15e Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Tue, 15 Apr 2014 12:44:35 -0400 Subject: drm/radeon: don't allow runpm=1 on systems with out ATPX vgaswitcheroo and the ATPX ACPI methods are required to power down the dGPU. bug: https://bugzilla.kernel.org/show_bug.cgi?id=73901 Signed-off-by: Alex Deucher Cc: stable@vger.kernel.org --- drivers/gpu/drm/radeon/radeon_kms.c | 8 +++----- 1 file changed, 3 insertions(+), 5 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/radeon/radeon_kms.c b/drivers/gpu/drm/radeon/radeon_kms.c index fb3d13f693dd..0cc47f12d995 100644 --- a/drivers/gpu/drm/radeon/radeon_kms.c +++ b/drivers/gpu/drm/radeon/radeon_kms.c @@ -107,11 +107,9 @@ int radeon_driver_load_kms(struct drm_device *dev, unsigned long flags) flags |= RADEON_IS_PCI; } - if (radeon_runtime_pm == 1) - flags |= RADEON_IS_PX; - else if ((radeon_runtime_pm == -1) && - radeon_has_atpx() && - ((flags & RADEON_IS_IGP) == 0)) + if ((radeon_runtime_pm != 0) && + radeon_has_atpx() && + ((flags & RADEON_IS_IGP) == 0)) flags |= RADEON_IS_PX; /* radeon_device_init should report only fatal error -- cgit v1.2.1 From a73d2e30b46787d478275db36c19222020e29dc5 Mon Sep 17 00:00:00 2001 From: Andrew Bresticker Date: Wed, 16 Apr 2014 13:40:17 -0700 Subject: pinctrl: as3722: fix handling of GPIO invert bit The AS3722_GPIO_INV bit will always be blindly overwritten by as3722_pinctrl_gpio_set_direction() and will be ignored when setting the value of the GPIO in as3722_gpio_set() since the enable_gpio_invert flag is never set. This will cause an initially inverted GPIO to toggle when requested as an output, which could be problematic if, for example, the GPIO controls a critical regulator. Instead of setting up the enable_gpio_invert flag, just leave the invert bit alone and check it before setting the GPIO value. Cc: # v3.14+ Signed-off-by: Andrew Bresticker Reviewed-by: Stephen Warren Tested-by: Stephen Warren Acked-by: Laxman Dewangan Signed-off-by: Linus Walleij --- drivers/pinctrl/pinctrl-as3722.c | 17 +++++++++++------ 1 file changed, 11 insertions(+), 6 deletions(-) (limited to 'drivers') diff --git a/drivers/pinctrl/pinctrl-as3722.c b/drivers/pinctrl/pinctrl-as3722.c index 92ed4b2e3c07..c862f9c0e9ce 100644 --- a/drivers/pinctrl/pinctrl-as3722.c +++ b/drivers/pinctrl/pinctrl-as3722.c @@ -64,7 +64,6 @@ struct as3722_pin_function { }; struct as3722_gpio_pin_control { - bool enable_gpio_invert; unsigned mode_prop; int io_function; }; @@ -320,10 +319,8 @@ static int as3722_pinctrl_gpio_set_direction(struct pinctrl_dev *pctldev, return mode; } - if (as_pci->gpio_control[offset].enable_gpio_invert) - mode |= AS3722_GPIO_INV; - - return as3722_write(as3722, AS3722_GPIOn_CONTROL_REG(offset), mode); + return as3722_update_bits(as3722, AS3722_GPIOn_CONTROL_REG(offset), + AS3722_GPIO_MODE_MASK, mode); } static const struct pinmux_ops as3722_pinmux_ops = { @@ -496,10 +493,18 @@ static void as3722_gpio_set(struct gpio_chip *chip, unsigned offset, { struct as3722_pctrl_info *as_pci = to_as_pci(chip); struct as3722 *as3722 = as_pci->as3722; - int en_invert = as_pci->gpio_control[offset].enable_gpio_invert; + int en_invert; u32 val; int ret; + ret = as3722_read(as3722, AS3722_GPIOn_CONTROL_REG(offset), &val); + if (ret < 0) { + dev_err(as_pci->dev, + "GPIO_CONTROL%d_REG read failed: %d\n", offset, ret); + return; + } + en_invert = !!(val & AS3722_GPIO_INV); + if (value) val = (en_invert) ? 0 : AS3722_GPIOn_SIGNAL(offset); else -- cgit v1.2.1 From 8834d3608cc516f13e2e510f4057c263f3d2ce42 Mon Sep 17 00:00:00 2001 From: Stanislaw Gruszka Date: Thu, 17 Apr 2014 11:08:47 +0200 Subject: rt2x00: fix beaconing on USB When disable beaconing we clear register with beacon and newer set it back, what make we stop send beacons infinitely. Cc: stable@vger.kernel.org Signed-off-by: Stanislaw Gruszka Signed-off-by: John W. Linville --- drivers/net/wireless/rt2x00/rt2x00mac.c | 22 ++++++++++++---------- 1 file changed, 12 insertions(+), 10 deletions(-) (limited to 'drivers') diff --git a/drivers/net/wireless/rt2x00/rt2x00mac.c b/drivers/net/wireless/rt2x00/rt2x00mac.c index ddeb5a709aa3..a87ee9b6585a 100644 --- a/drivers/net/wireless/rt2x00/rt2x00mac.c +++ b/drivers/net/wireless/rt2x00/rt2x00mac.c @@ -620,21 +620,19 @@ void rt2x00mac_bss_info_changed(struct ieee80211_hw *hw, rt2x00lib_config_intf(rt2x00dev, intf, vif->type, NULL, bss_conf->bssid); - /* - * Update the beacon. This is only required on USB devices. PCI - * devices fetch beacons periodically. - */ - if (changes & BSS_CHANGED_BEACON && rt2x00_is_usb(rt2x00dev)) - rt2x00queue_update_beacon(rt2x00dev, vif); - /* * Start/stop beaconing. */ if (changes & BSS_CHANGED_BEACON_ENABLED) { if (!bss_conf->enable_beacon && intf->enable_beacon) { - rt2x00queue_clear_beacon(rt2x00dev, vif); rt2x00dev->intf_beaconing--; intf->enable_beacon = false; + /* + * Clear beacon in the H/W for this vif. This is needed + * to disable beaconing on this particular interface + * and keep it running on other interfaces. + */ + rt2x00queue_clear_beacon(rt2x00dev, vif); if (rt2x00dev->intf_beaconing == 0) { /* @@ -645,11 +643,15 @@ void rt2x00mac_bss_info_changed(struct ieee80211_hw *hw, rt2x00queue_stop_queue(rt2x00dev->bcn); mutex_unlock(&intf->beacon_skb_mutex); } - - } else if (bss_conf->enable_beacon && !intf->enable_beacon) { rt2x00dev->intf_beaconing++; intf->enable_beacon = true; + /* + * Upload beacon to the H/W. This is only required on + * USB devices. PCI devices fetch beacons periodically. + */ + if (rt2x00_is_usb(rt2x00dev)) + rt2x00queue_update_beacon(rt2x00dev, vif); if (rt2x00dev->intf_beaconing == 1) { /* -- cgit v1.2.1 From 328e203fc35f0b4f6df1c4943f74cf553bcc04f8 Mon Sep 17 00:00:00 2001 From: Colin Ian King Date: Mon, 21 Apr 2014 17:38:44 +0100 Subject: rtlwifi: rtl8188ee: initialize packet_beacon static code analysis from cppcheck reports: [drivers/net/wireless/rtlwifi/rtl8188ee/trx.c:322]: (error) Uninitialized variable: packet_beacon packet_beacon is not initialized and hence packet_beacon contains garbage from the stack, so set it to false. Signed-off-by: Colin Ian King Cc: Stable [3.10+] Acked-by: Larry Finger Signed-off-by: John W. Linville --- drivers/net/wireless/rtlwifi/rtl8188ee/trx.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/wireless/rtlwifi/rtl8188ee/trx.c b/drivers/net/wireless/rtlwifi/rtl8188ee/trx.c index 06ef47cd6203..5b4c225396f2 100644 --- a/drivers/net/wireless/rtlwifi/rtl8188ee/trx.c +++ b/drivers/net/wireless/rtlwifi/rtl8188ee/trx.c @@ -293,7 +293,7 @@ static void _rtl88ee_translate_rx_signal_stuff(struct ieee80211_hw *hw, u8 *psaddr; __le16 fc; u16 type, ufc; - bool match_bssid, packet_toself, packet_beacon, addr; + bool match_bssid, packet_toself, packet_beacon = false, addr; tmp_buf = skb->data + pstatus->rx_drvinfo_size + pstatus->rx_bufshift; -- cgit v1.2.1 From 3a758134e66ca74a9df792616b5288b2fa2cfd7f Mon Sep 17 00:00:00 2001 From: Tim Harvey Date: Mon, 21 Apr 2014 16:14:56 -0700 Subject: ath9k: fix possible hang on flush If a flush is requested, make sure to clear the descriptor once we've processed it. This resolves a hang that will occur if all RX descriptors are full when a flush is requested. Signed-off-by: Tim Harvey Acked-by: Felix Fietkau Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ath9k/recv.c | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/net/wireless/ath/ath9k/recv.c b/drivers/net/wireless/ath/ath9k/recv.c index 6c9accdb52e4..e77a2536b818 100644 --- a/drivers/net/wireless/ath/ath9k/recv.c +++ b/drivers/net/wireless/ath/ath9k/recv.c @@ -1113,14 +1113,13 @@ requeue_drop_frag: } requeue: list_add_tail(&bf->list, &sc->rx.rxbuf); - if (flush) - continue; if (edma) { ath_rx_edma_buf_link(sc, qtype); } else { ath_rx_buf_relink(sc, bf); - ath9k_hw_rxena(ah); + if (!flush) + ath9k_hw_rxena(ah); } } while (1); -- cgit v1.2.1 From c82552c5b0cb1735dbcbad78b1ffc6d3c212dc56 Mon Sep 17 00:00:00 2001 From: Tim Harvey Date: Mon, 21 Apr 2014 16:14:57 -0700 Subject: ath9k: add a recv budget Implement a recv budget so that in cases of high traffic we still allow other taskets to get processed. Without this, we can encounter a host of issues during high wireless traffic reception depending on system load including rcu stall's detected (ARM), soft lockups, failure to service critical tasks such as watchdog resets, and triggering of the tx stuck tasklet. The same thing was proposed previously by Ben: http://www.spinics.net/lists/linux-wireless/msg112891.html The only difference here is that I make sure only processed packets are counted in the budget by checking at the end of the rx loop. Signed-off-by: Tim Harvey Acked-by: Felix Fietkau Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ath9k/recv.c | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'drivers') diff --git a/drivers/net/wireless/ath/ath9k/recv.c b/drivers/net/wireless/ath/ath9k/recv.c index e77a2536b818..19df969ec909 100644 --- a/drivers/net/wireless/ath/ath9k/recv.c +++ b/drivers/net/wireless/ath/ath9k/recv.c @@ -975,6 +975,7 @@ int ath_rx_tasklet(struct ath_softc *sc, int flush, bool hp) u64 tsf = 0; unsigned long flags; dma_addr_t new_buf_addr; + unsigned int budget = 512; if (edma) dma_type = DMA_BIDIRECTIONAL; @@ -1121,6 +1122,9 @@ requeue: if (!flush) ath9k_hw_rxena(ah); } + + if (!budget--) + break; } while (1); if (!(ah->imask & ATH9K_INT_RXEOL)) { -- cgit v1.2.1 From 235a251abad38910120ba2dbd77296983c1d71b2 Mon Sep 17 00:00:00 2001 From: Max Schwarz Date: Fri, 18 Apr 2014 02:17:32 +0200 Subject: arc_emac: write initial MAC address from devicetree to hw The MAC address retrieved from dt was not actually written to the hardware. This meant proper communication was only possible after changing the MAC address. Fix that by always writing the mac address during probing. Signed-off-by: Max Schwarz Acked-by: Heiko Stuebner Tested-by: Heiko Stuebner Signed-off-by: David S. Miller --- drivers/net/ethernet/arc/emac_main.c | 21 ++++++++++++++------- 1 file changed, 14 insertions(+), 7 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/arc/emac_main.c b/drivers/net/ethernet/arc/emac_main.c index eeecc29cf5b7..9f45782819ec 100644 --- a/drivers/net/ethernet/arc/emac_main.c +++ b/drivers/net/ethernet/arc/emac_main.c @@ -574,6 +574,18 @@ static int arc_emac_tx(struct sk_buff *skb, struct net_device *ndev) return NETDEV_TX_OK; } +static void arc_emac_set_address_internal(struct net_device *ndev) +{ + struct arc_emac_priv *priv = netdev_priv(ndev); + unsigned int addr_low, addr_hi; + + addr_low = le32_to_cpu(*(__le32 *) &ndev->dev_addr[0]); + addr_hi = le16_to_cpu(*(__le16 *) &ndev->dev_addr[4]); + + arc_reg_set(priv, R_ADDRL, addr_low); + arc_reg_set(priv, R_ADDRH, addr_hi); +} + /** * arc_emac_set_address - Set the MAC address for this device. * @ndev: Pointer to net_device structure. @@ -587,9 +599,7 @@ static int arc_emac_tx(struct sk_buff *skb, struct net_device *ndev) */ static int arc_emac_set_address(struct net_device *ndev, void *p) { - struct arc_emac_priv *priv = netdev_priv(ndev); struct sockaddr *addr = p; - unsigned int addr_low, addr_hi; if (netif_running(ndev)) return -EBUSY; @@ -599,11 +609,7 @@ static int arc_emac_set_address(struct net_device *ndev, void *p) memcpy(ndev->dev_addr, addr->sa_data, ndev->addr_len); - addr_low = le32_to_cpu(*(__le32 *) &ndev->dev_addr[0]); - addr_hi = le16_to_cpu(*(__le16 *) &ndev->dev_addr[4]); - - arc_reg_set(priv, R_ADDRL, addr_low); - arc_reg_set(priv, R_ADDRH, addr_hi); + arc_emac_set_address_internal(ndev); return 0; } @@ -713,6 +719,7 @@ static int arc_emac_probe(struct platform_device *pdev) else eth_hw_addr_random(ndev); + arc_emac_set_address_internal(ndev); dev_info(&pdev->dev, "MAC address is now %pM\n", ndev->dev_addr); /* Do 1 allocation instead of 2 separate ones for Rx and Tx BD rings */ -- cgit v1.2.1 From c18e9cd623b8aa88090615602c3db7f1386a139d Mon Sep 17 00:00:00 2001 From: Amos Kong Date: Fri, 18 Apr 2014 13:45:41 +0800 Subject: virtio_net: zero is an invald queue_pairs number Execute "ethtool -L eth0 combined 0" in guest, if multiqueue is enabled, virtnet_send_command() will return -EINVAL error, there is a validation in QEMU. But if multiqueue is disabled, virtnet_set_queues() will just return zero (success). We should return error for this situation. Signed-off-by: Amos Kong Acked-by: Jason Wang Signed-off-by: David S. Miller --- drivers/net/virtio_net.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/virtio_net.c b/drivers/net/virtio_net.c index 7b687469199b..8a852b5f215f 100644 --- a/drivers/net/virtio_net.c +++ b/drivers/net/virtio_net.c @@ -1285,7 +1285,7 @@ static int virtnet_set_channels(struct net_device *dev, if (channels->rx_count || channels->tx_count || channels->other_count) return -EINVAL; - if (queue_pairs > vi->max_queue_pairs) + if (queue_pairs > vi->max_queue_pairs || queue_pairs == 0) return -EINVAL; get_online_cpus(); -- cgit v1.2.1 From 3ee2b7c4b6785aab45a548b161b4c42ac6522592 Mon Sep 17 00:00:00 2001 From: Byungho An Date: Fri, 18 Apr 2014 20:59:36 +0900 Subject: net: sxgbe: rearrange dma descriptor This patch moves cksum_ctl to tx_rd_des23 from cksum_pktlen for correct checksum offloading and modifies size for Tx/Rx descriptor. Signed-off-by: Byungho An Signed-off-by: David S. Miller --- drivers/net/ethernet/samsung/sxgbe/sxgbe_desc.c | 4 +-- drivers/net/ethernet/samsung/sxgbe/sxgbe_desc.h | 39 +++++++++++-------------- 2 files changed, 19 insertions(+), 24 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/samsung/sxgbe/sxgbe_desc.c b/drivers/net/ethernet/samsung/sxgbe/sxgbe_desc.c index e896dbbd2e15..d71691be4136 100644 --- a/drivers/net/ethernet/samsung/sxgbe/sxgbe_desc.c +++ b/drivers/net/ethernet/samsung/sxgbe/sxgbe_desc.c @@ -45,10 +45,10 @@ static void sxgbe_prepare_tx_desc(struct sxgbe_tx_norm_desc *p, u8 is_fd, p->tdes23.tx_rd_des23.first_desc = is_fd; p->tdes23.tx_rd_des23.buf1_size = buf1_len; - p->tdes23.tx_rd_des23.tx_pkt_len.cksum_pktlen.total_pkt_len = pkt_len; + p->tdes23.tx_rd_des23.tx_pkt_len.pkt_len.total_pkt_len = pkt_len; if (cksum) - p->tdes23.tx_rd_des23.tx_pkt_len.cksum_pktlen.cksum_ctl = cic_full; + p->tdes23.tx_rd_des23.cksum_ctl = cic_full; } /* Set VLAN control information */ diff --git a/drivers/net/ethernet/samsung/sxgbe/sxgbe_desc.h b/drivers/net/ethernet/samsung/sxgbe/sxgbe_desc.h index 838cb9fb0ea9..022630098aea 100644 --- a/drivers/net/ethernet/samsung/sxgbe/sxgbe_desc.h +++ b/drivers/net/ethernet/samsung/sxgbe/sxgbe_desc.h @@ -39,22 +39,22 @@ struct sxgbe_tx_norm_desc { u32 int_on_com:1; /* TDES3 */ union { - u32 tcp_payload_len:18; + u16 tcp_payload_len; struct { u32 total_pkt_len:15; u32 reserved1:1; - u32 cksum_ctl:2; - } cksum_pktlen; + } pkt_len; } tx_pkt_len; - u32 tse_bit:1; - u32 tcp_hdr_len:4; - u32 sa_insert_ctl:3; - u32 crc_pad_ctl:2; - u32 last_desc:1; - u32 first_desc:1; - u32 ctxt_bit:1; - u32 own_bit:1; + u16 cksum_ctl:2; + u16 tse_bit:1; + u16 tcp_hdr_len:4; + u16 sa_insert_ctl:3; + u16 crc_pad_ctl:2; + u16 last_desc:1; + u16 first_desc:1; + u16 ctxt_bit:1; + u16 own_bit:1; } tx_rd_des23; /* tx write back Desc 2,3 */ @@ -70,25 +70,20 @@ struct sxgbe_tx_norm_desc { struct sxgbe_rx_norm_desc { union { - u32 rdes0; /* buf1 address */ - struct { + u64 rdes01; /* buf1 address */ + union { u32 out_vlan_tag:16; u32 in_vlan_tag:16; - } wb_rx_des0; - } rd_wb_des0; - - union { - u32 rdes1; /* buf2 address or buf1[63:32] */ - u32 rss_hash; /* Write-back RX */ - } rd_wb_des1; + u32 rss_hash; + } rx_wb_des01; + } rdes01; union { /* RX Read format Desc 2,3 */ struct{ /* RDES2 */ - u32 buf2_addr; + u64 buf2_addr:62; /* RDES3 */ - u32 buf2_hi_addr:30; u32 int_on_com:1; u32 own_bit:1; } rx_rd_des23; -- cgit v1.2.1 From 7b07bd4e5187e8553d7776f5225e19f00b9fb863 Mon Sep 17 00:00:00 2001 From: Byungho An Date: Fri, 18 Apr 2014 20:59:39 +0900 Subject: net: sxgbe: Added phy_found error path This patch adds phy_found error path when there is no phy device and changes bus_name. Signed-off-by: Byungho An Signed-off-by: David S. Miller --- drivers/net/ethernet/samsung/sxgbe/sxgbe_mdio.c | 14 ++++++++++++-- 1 file changed, 12 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/samsung/sxgbe/sxgbe_mdio.c b/drivers/net/ethernet/samsung/sxgbe/sxgbe_mdio.c index 01af2cbb479d..43ccb4a6de15 100644 --- a/drivers/net/ethernet/samsung/sxgbe/sxgbe_mdio.c +++ b/drivers/net/ethernet/samsung/sxgbe/sxgbe_mdio.c @@ -27,7 +27,7 @@ #define SXGBE_SMA_PREAD_CMD 0x02 /* post read increament address */ #define SXGBE_SMA_READ_CMD 0x03 /* read command */ #define SXGBE_SMA_SKIP_ADDRFRM 0x00040000 /* skip the address frame */ -#define SXGBE_MII_BUSY 0x00800000 /* mii busy */ +#define SXGBE_MII_BUSY 0x00400000 /* mii busy */ static int sxgbe_mdio_busy_wait(void __iomem *ioaddr, unsigned int mii_data) { @@ -147,6 +147,7 @@ int sxgbe_mdio_register(struct net_device *ndev) struct sxgbe_mdio_bus_data *mdio_data = priv->plat->mdio_bus_data; int err, phy_addr; int *irqlist; + bool phy_found = false; bool act; /* allocate the new mdio bus */ @@ -162,7 +163,7 @@ int sxgbe_mdio_register(struct net_device *ndev) irqlist = priv->mii_irq; /* assign mii bus fields */ - mdio_bus->name = "samsxgbe"; + mdio_bus->name = "sxgbe"; mdio_bus->read = &sxgbe_mdio_read; mdio_bus->write = &sxgbe_mdio_write; snprintf(mdio_bus->id, MII_BUS_ID_SIZE, "%s-%x", @@ -216,13 +217,22 @@ int sxgbe_mdio_register(struct net_device *ndev) netdev_info(ndev, "PHY ID %08x at %d IRQ %s (%s)%s\n", phy->phy_id, phy_addr, irq_str, dev_name(&phy->dev), act ? " active" : ""); + phy_found = true; } } + if (!phy_found) { + netdev_err(ndev, "PHY not found\n"); + goto phyfound_err; + } + priv->mii = mdio_bus; return 0; +phyfound_err: + err = -ENODEV; + mdiobus_unregister(mdio_bus); mdiobus_err: mdiobus_free(mdio_bus); return err; -- cgit v1.2.1 From 702b3468c9eed1495067f6af2094372d75b9b23b Mon Sep 17 00:00:00 2001 From: Zi Shen Lim Date: Fri, 18 Apr 2014 20:47:30 -0700 Subject: smc91x: fix compile error when SMC_DEBUG >= 2 MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit When SMC_DEBUG >= 2, we hit the following compilation error: drivers/net/ethernet/smsc/smc91x.c:85:0: drivers/net/ethernet/smsc/smc91x.c: In function ‘smc_findirq’: drivers/net/ethernet/smsc/smc91x.c:1784:9: error: ‘dev’ undeclared (first use in this function) DBG(2, dev, "%s: %s\n", CARDNAME, __func__); ^ Fix it by passing in the appropriate netdev pointer. Signed-off-by: Zi Shen Lim Signed-off-by: David S. Miller --- drivers/net/ethernet/smsc/smc91x.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/smsc/smc91x.c b/drivers/net/ethernet/smsc/smc91x.c index d1b4dca53a9d..597909ff2341 100644 --- a/drivers/net/ethernet/smsc/smc91x.c +++ b/drivers/net/ethernet/smsc/smc91x.c @@ -1781,7 +1781,7 @@ static int smc_findirq(struct smc_local *lp) int timeout = 20; unsigned long cookie; - DBG(2, dev, "%s: %s\n", CARDNAME, __func__); + DBG(2, lp->dev, "%s: %s\n", CARDNAME, __func__); cookie = probe_irq_on(); -- cgit v1.2.1 From 6a51b5e4d59e00051e65e836520912cd7c717be1 Mon Sep 17 00:00:00 2001 From: Julia Lawall Date: Sun, 20 Apr 2014 11:48:33 +0200 Subject: hisax/icc: add missing semicolon after label A label just before a brace needs a following semicolon (empty statement). Signed-off-by: Julia Lawall Signed-off-by: David S. Miller --- drivers/isdn/hisax/icc.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/isdn/hisax/icc.c b/drivers/isdn/hisax/icc.c index 51dae9167238..96d1df05044f 100644 --- a/drivers/isdn/hisax/icc.c +++ b/drivers/isdn/hisax/icc.c @@ -425,7 +425,7 @@ afterXPR: if (cs->debug & L1_DEB_MONITOR) debugl1(cs, "ICC %02x -> MOX1", cs->dc.icc.mon_tx[cs->dc.icc.mon_txp - 1]); } - AfterMOX1: + AfterMOX1: ; #endif } } -- cgit v1.2.1 From 7740fc52105c9e6d2beac389a9ae0ce7138cf5ab Mon Sep 17 00:00:00 2001 From: Lejun Zhu Date: Tue, 22 Apr 2014 22:47:13 -0700 Subject: Input: soc_button_array - fix a crash during rmmod When the system has zero or one button available, trying to rmmod soc_button_array will cause crash. Fix this by properly handling -ENODEV in probe(). Signed-off-by: Lejun Zhu Signed-off-by: Dmitry Torokhov --- drivers/input/misc/soc_button_array.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/input/misc/soc_button_array.c b/drivers/input/misc/soc_button_array.c index 08ead2aaede5..20c80f543d5e 100644 --- a/drivers/input/misc/soc_button_array.c +++ b/drivers/input/misc/soc_button_array.c @@ -169,6 +169,7 @@ static int soc_button_pnp_probe(struct pnp_dev *pdev, soc_button_remove(pdev); return error; } + continue; } priv->children[i] = pd; -- cgit v1.2.1 From ae4bedf0679d99f0a9b80a7ea9b8dd205de05d06 Mon Sep 17 00:00:00 2001 From: Jordan Rife Date: Tue, 22 Apr 2014 17:44:51 -0700 Subject: Input: elantech - add support for newer elantech touchpads Newer elantech touchpads are not recognized by the current driver, since it fails to detect their firmware version number. This prevents more advanced touchpad features from being usable such as two-finger scrolling. This patch allows newer touchpads to be detected and be fully functional. Tested on Sony Vaio SVF13N17PXB. Signed-off-by: Jordan Rife Signed-off-by: Dmitry Torokhov --- drivers/input/mouse/elantech.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/input/mouse/elantech.c b/drivers/input/mouse/elantech.c index ef1cf52f8bb9..088d3541c7d3 100644 --- a/drivers/input/mouse/elantech.c +++ b/drivers/input/mouse/elantech.c @@ -1353,6 +1353,7 @@ static int elantech_set_properties(struct elantech_data *etd) case 6: case 7: case 8: + case 9: etd->hw_version = 4; break; default: -- cgit v1.2.1 From 9953599bc02dbc1d3330e6a0bfc6c50e9dffcac6 Mon Sep 17 00:00:00 2001 From: Daniel Vetter Date: Sun, 13 Apr 2014 12:00:33 +0200 Subject: drm/i915: Don't check gmch state on inherited configs ... our current modeset code isn't good enough yet to handle this. The scenario is: 1. BIOS sets up a cloned config with lvds+external screen on the same pipe, e.g. pipe B. 2. We read out that state for pipe B and assign the gmch_pfit state to it. 3. The initial modeset switches the lvds to pipe A but due to lack of atomic modeset we don't recompute the config of pipe B. -> both pipes now claim (in the sw pipe config structure) to use the gmch_pfit, which just won't work. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=74081 Tested-by: max Cc: Alan Stern Cc: stable@vger.kernel.org Signed-off-by: Daniel Vetter Signed-off-by: Jani Nikula --- drivers/gpu/drm/i915/intel_display.c | 23 ++++++++++++++++++----- drivers/gpu/drm/i915/intel_drv.h | 3 ++- 2 files changed, 20 insertions(+), 6 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c index dae976f51d83..69bcc42a0e44 100644 --- a/drivers/gpu/drm/i915/intel_display.c +++ b/drivers/gpu/drm/i915/intel_display.c @@ -9654,11 +9654,22 @@ intel_pipe_config_compare(struct drm_device *dev, PIPE_CONF_CHECK_I(pipe_src_w); PIPE_CONF_CHECK_I(pipe_src_h); - PIPE_CONF_CHECK_I(gmch_pfit.control); - /* pfit ratios are autocomputed by the hw on gen4+ */ - if (INTEL_INFO(dev)->gen < 4) - PIPE_CONF_CHECK_I(gmch_pfit.pgm_ratios); - PIPE_CONF_CHECK_I(gmch_pfit.lvds_border_bits); + /* + * FIXME: BIOS likes to set up a cloned config with lvds+external + * screen. Since we don't yet re-compute the pipe config when moving + * just the lvds port away to another pipe the sw tracking won't match. + * + * Proper atomic modesets with recomputed global state will fix this. + * Until then just don't check gmch state for inherited modes. + */ + if (!PIPE_CONF_QUIRK(PIPE_CONFIG_QUIRK_INHERITED_MODE)) { + PIPE_CONF_CHECK_I(gmch_pfit.control); + /* pfit ratios are autocomputed by the hw on gen4+ */ + if (INTEL_INFO(dev)->gen < 4) + PIPE_CONF_CHECK_I(gmch_pfit.pgm_ratios); + PIPE_CONF_CHECK_I(gmch_pfit.lvds_border_bits); + } + PIPE_CONF_CHECK_I(pch_pfit.enabled); if (current_config->pch_pfit.enabled) { PIPE_CONF_CHECK_I(pch_pfit.pos); @@ -11616,6 +11627,8 @@ static void intel_modeset_readout_hw_state(struct drm_device *dev) base.head) { memset(&crtc->config, 0, sizeof(crtc->config)); + crtc->config.quirks |= PIPE_CONFIG_QUIRK_INHERITED_MODE; + crtc->active = dev_priv->display.get_pipe_config(crtc, &crtc->config); diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h index 0542de982260..328b1a70264b 100644 --- a/drivers/gpu/drm/i915/intel_drv.h +++ b/drivers/gpu/drm/i915/intel_drv.h @@ -236,7 +236,8 @@ struct intel_crtc_config { * tracked with quirk flags so that fastboot and state checker can act * accordingly. */ -#define PIPE_CONFIG_QUIRK_MODE_SYNC_FLAGS (1<<0) /* unreliable sync mode.flags */ +#define PIPE_CONFIG_QUIRK_MODE_SYNC_FLAGS (1<<0) /* unreliable sync mode.flags */ +#define PIPE_CONFIG_QUIRK_INHERITED_MODE (1<<1) /* mode inherited from firmware */ unsigned long quirks; /* User requested mode, only valid as a starting point to -- cgit v1.2.1 From 636352173a0dd127636fe331c97b117a8004bf50 Mon Sep 17 00:00:00 2001 From: Paulo Zanoni Date: Tue, 22 Apr 2014 19:55:42 -0300 Subject: drm/i915: get power domain in case the BIOS enabled eDP VDD If I unplug the eDP monitor, the BIOS of my machine will enable the VDD bit, then when the driver loads it will think VDD is enabled. It will detect that the eDP is not enabled and return false from intel_edp_init_connector. This will trigger a call to edp_panel_vdd_off_sync(), which trigger a WARN saying that the refcount of the power domain is less than zero. The problem happens because the driver gets a refcount whenever it enables the VDD bit, and puts the refcount whenever it disables the VDD bit. But on this case, the BIOS enabled VDD, so all we do is to call put() without calling get() first, so the code added is there to make sure we always have the get() in case the BIOS enabled the bit. This regression was introduced in commit e9cb81a22841908b1c075156b409a538d09c8466 Author: Paulo Zanoni Date: Thu Nov 21 13:47:23 2013 -0200 drm/i915: get a runtime PM reference when the panel VDD is on v2: - Rebase Tested-by: Chris Wilson (v1) Reviewed-by: Daniel Vetter Cc: stable@vger.kernel.org (v3.13+) Signed-off-by: Paulo Zanoni Signed-off-by: Jani Nikula --- drivers/gpu/drm/i915/intel_dp.c | 11 ++++++++++- 1 file changed, 10 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c index d2a55884ad52..dfa85289f28f 100644 --- a/drivers/gpu/drm/i915/intel_dp.c +++ b/drivers/gpu/drm/i915/intel_dp.c @@ -3619,7 +3619,8 @@ static bool intel_edp_init_connector(struct intel_dp *intel_dp, { struct drm_connector *connector = &intel_connector->base; struct intel_digital_port *intel_dig_port = dp_to_dig_port(intel_dp); - struct drm_device *dev = intel_dig_port->base.base.dev; + struct intel_encoder *intel_encoder = &intel_dig_port->base; + struct drm_device *dev = intel_encoder->base.dev; struct drm_i915_private *dev_priv = dev->dev_private; struct drm_display_mode *fixed_mode = NULL; bool has_dpcd; @@ -3629,6 +3630,14 @@ static bool intel_edp_init_connector(struct intel_dp *intel_dp, if (!is_edp(intel_dp)) return true; + /* The VDD bit needs a power domain reference, so if the bit is already + * enabled when we boot, grab this reference. */ + if (edp_have_panel_vdd(intel_dp)) { + enum intel_display_power_domain power_domain; + power_domain = intel_display_port_power_domain(intel_encoder); + intel_display_power_get(dev_priv, power_domain); + } + /* Cache DPCD and EDID for edp. */ intel_edp_panel_vdd_on(intel_dp); has_dpcd = intel_dp_get_dpcd(intel_dp); -- cgit v1.2.1 From ae107d06137ce210ea21d1423443d3638599f297 Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Tue, 22 Apr 2014 20:40:25 +0200 Subject: dt: Fix binding typos in clock-names and interrupt-names s/interrupts-names/interrupt-names/g s/clocks-names/clock-names/g Some of the binding files and device tree files get this wrong and the kernel won't be able to pick it up. Fix them up now so that they don't get widely used. Signed-off-by: Geert Uytterhoeven Acked-by : Patrice Chotard Signed-off-by: Grant Likely --- drivers/of/irq.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/of/irq.c b/drivers/of/irq.c index 9bcf2cf19357..e2e4c548a42f 100644 --- a/drivers/of/irq.c +++ b/drivers/of/irq.c @@ -364,7 +364,7 @@ int of_irq_to_resource(struct device_node *dev, int index, struct resource *r) memset(r, 0, sizeof(*r)); /* - * Get optional "interrupts-names" property to add a name + * Get optional "interrupt-names" property to add a name * to the resource. */ of_property_read_string_index(dev, "interrupt-names", index, -- cgit v1.2.1 From 58968625c496c2e39545781915dbb848b38bd249 Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Thu, 10 Apr 2014 16:47:19 -0700 Subject: pinctrl: single: Clear pin interrupts enabled by bootloader Since we set up device wake-up interrupts as pinctrl-single interrupts, we now must use the standard request_irq and related functions to manage them. If the pin interrupts are enabled for some pins at boot, the wake-up events can show up as constantly pending at least on omaps and will hang the system unless the related device driver clears the event at the device. To fix this, let's clear the interrupt flags during init, and print out a warning so the board maintainers can update their drivers to do proper request_irq for the driver specific wake-up events. Cc: Haojian Zhuang Cc: Linus Walleij Signed-off-by: Tony Lindgren Signed-off-by: Linus Walleij --- drivers/pinctrl/pinctrl-single.c | 13 +++++++++++++ 1 file changed, 13 insertions(+) (limited to 'drivers') diff --git a/drivers/pinctrl/pinctrl-single.c b/drivers/pinctrl/pinctrl-single.c index 81075f2a1d3f..2960557bfed9 100644 --- a/drivers/pinctrl/pinctrl-single.c +++ b/drivers/pinctrl/pinctrl-single.c @@ -810,6 +810,7 @@ static const struct pinconf_ops pcs_pinconf_ops = { static int pcs_add_pin(struct pcs_device *pcs, unsigned offset, unsigned pin_pos) { + struct pcs_soc_data *pcs_soc = &pcs->socdata; struct pinctrl_pin_desc *pin; struct pcs_name *pn; int i; @@ -821,6 +822,18 @@ static int pcs_add_pin(struct pcs_device *pcs, unsigned offset, return -ENOMEM; } + if (pcs_soc->irq_enable_mask) { + unsigned val; + + val = pcs->read(pcs->base + offset); + if (val & pcs_soc->irq_enable_mask) { + dev_dbg(pcs->dev, "irq enabled at boot for pin at %lx (%x), clearing\n", + (unsigned long)pcs->res->start + offset, val); + val &= ~pcs_soc->irq_enable_mask; + pcs->write(val, pcs->base + offset); + } + } + pin = &pcs->pins.pa[i]; pn = &pcs->names[i]; sprintf(pn->name, "%lx.%d", -- cgit v1.2.1 From 34ce57e9df7d14b52c7613bb2c190e411ca99186 Mon Sep 17 00:00:00 2001 From: Guido Piasenza Date: Tue, 22 Apr 2014 16:28:03 +0100 Subject: sh-pfc: r8a7790: Fix definition of IPSR5 The extra entry in the table makes SCIFA0_B, and all peripherals after it, fail. Signed-off-by: Phil Edworthy Acked-by: Laurent Pinchart Signed-off-by: Linus Walleij --- drivers/pinctrl/sh-pfc/pfc-r8a7790.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/pinctrl/sh-pfc/pfc-r8a7790.c b/drivers/pinctrl/sh-pfc/pfc-r8a7790.c index 48093719167a..f5cd3f961808 100644 --- a/drivers/pinctrl/sh-pfc/pfc-r8a7790.c +++ b/drivers/pinctrl/sh-pfc/pfc-r8a7790.c @@ -4794,8 +4794,7 @@ static const struct pinmux_cfg_reg pinmux_config_regs[] = { FN_MSIOF0_SCK_B, 0, /* IP5_23_21 [3] */ FN_WE1_N, FN_IERX, FN_CAN1_RX, FN_VI1_G4, - FN_VI1_G4_B, FN_VI2_R6, FN_SCIFA0_CTS_N_B, - FN_IERX_C, 0, + FN_VI1_G4_B, FN_VI2_R6, FN_SCIFA0_CTS_N_B, FN_IERX_C, /* IP5_20_18 [3] */ FN_WE0_N, FN_IECLK, FN_CAN_CLK, FN_VI2_VSYNC_N, FN_SCIFA0_TXD_B, FN_VI2_VSYNC_N_B, 0, 0, -- cgit v1.2.1 From 0c66c5628bbb5e96360032440f53a6cb6f8973d0 Mon Sep 17 00:00:00 2001 From: Phil Edworthy Date: Tue, 22 Apr 2014 17:38:05 +0100 Subject: sh-pfc: r8a7791: Fix definition of MOD_SEL3 There is a missing 0 entry from the MOD_SEL3 table. Signed-off-by: Phil Edworthy Acked-by: Laurent Pinchart Signed-off-by: Linus Walleij --- drivers/pinctrl/sh-pfc/pfc-r8a7791.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/pinctrl/sh-pfc/pfc-r8a7791.c b/drivers/pinctrl/sh-pfc/pfc-r8a7791.c index 5186d70c49d4..7868bf3a0f91 100644 --- a/drivers/pinctrl/sh-pfc/pfc-r8a7791.c +++ b/drivers/pinctrl/sh-pfc/pfc-r8a7791.c @@ -5288,7 +5288,7 @@ static const struct pinmux_cfg_reg pinmux_config_regs[] = { /* SEL_SCIF3 [2] */ FN_SEL_SCIF3_0, FN_SEL_SCIF3_1, FN_SEL_SCIF3_2, FN_SEL_SCIF3_3, /* SEL_IEB [2] */ - FN_SEL_IEB_0, FN_SEL_IEB_1, FN_SEL_IEB_2, + FN_SEL_IEB_0, FN_SEL_IEB_1, FN_SEL_IEB_2, 0, /* SEL_MMC [1] */ FN_SEL_MMC_0, FN_SEL_MMC_1, /* SEL_SCIF5 [1] */ -- cgit v1.2.1 From 6a1197457f9ec085871d2f842e1bbbe9d13216da Mon Sep 17 00:00:00 2001 From: Hubert Chaumette Date: Tue, 22 Apr 2014 15:01:04 +0200 Subject: net/phy: micrel: fix bugged test on device tree loading for ksz9021 In ksz9021_load_values_from_of() val2 to val4 aren't tested against their initialization value. This causes the test to always succeed, and this value to be used as if it was loaded from the devicetree instead of being ignored, in case of a missing/invalid property in the ethernet OF device node. As a result, the value "0" is written to the relevant registers. Change the conditions to test against the right initialization value. Signed-off-by: Hubert Chaumette Signed-off-by: David S. Miller --- drivers/net/phy/micrel.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/net/phy/micrel.c b/drivers/net/phy/micrel.c index 5ad971a55c5d..d849684231c1 100644 --- a/drivers/net/phy/micrel.c +++ b/drivers/net/phy/micrel.c @@ -246,13 +246,13 @@ static int ksz9021_load_values_from_of(struct phy_device *phydev, if (val1 != -1) newval = ((newval & 0xfff0) | ((val1 / PS_TO_REG) & 0xf) << 0); - if (val2 != -1) + if (val2 != -2) newval = ((newval & 0xff0f) | ((val2 / PS_TO_REG) & 0xf) << 4); - if (val3 != -1) + if (val3 != -3) newval = ((newval & 0xf0ff) | ((val3 / PS_TO_REG) & 0xf) << 8); - if (val4 != -1) + if (val4 != -4) newval = ((newval & 0x0fff) | ((val4 / PS_TO_REG) & 0xf) << 12); return kszphy_extended_write(phydev, reg, newval); -- cgit v1.2.1 From 9e4b93f905bc0ca1363a07b0f039455d9117d6bc Mon Sep 17 00:00:00 2001 From: Nicolas Dichtel Date: Tue, 22 Apr 2014 15:01:30 +0200 Subject: vxlan: ensure to advertise the right fdb remote The goal of this patch is to fix rtnelink notification. The main problem was about notification for fdb entry with more than one remote. Before the patch, when a remote was added to an existing fdb entry, the kernel advertised the first remote instead of the added one. Also when a remote was removed from a fdb entry with several remotes, the deleted remote was not advertised. Signed-off-by: Nicolas Dichtel Signed-off-by: David S. Miller --- drivers/net/vxlan.c | 38 +++++++++++++++++++++----------------- 1 file changed, 21 insertions(+), 17 deletions(-) (limited to 'drivers') diff --git a/drivers/net/vxlan.c b/drivers/net/vxlan.c index 82355d5d155a..4dbb2ed85b97 100644 --- a/drivers/net/vxlan.c +++ b/drivers/net/vxlan.c @@ -389,8 +389,8 @@ static inline size_t vxlan_nlmsg_size(void) + nla_total_size(sizeof(struct nda_cacheinfo)); } -static void vxlan_fdb_notify(struct vxlan_dev *vxlan, - struct vxlan_fdb *fdb, int type) +static void vxlan_fdb_notify(struct vxlan_dev *vxlan, struct vxlan_fdb *fdb, + struct vxlan_rdst *rd, int type) { struct net *net = dev_net(vxlan->dev); struct sk_buff *skb; @@ -400,8 +400,7 @@ static void vxlan_fdb_notify(struct vxlan_dev *vxlan, if (skb == NULL) goto errout; - err = vxlan_fdb_info(skb, vxlan, fdb, 0, 0, type, 0, - first_remote_rtnl(fdb)); + err = vxlan_fdb_info(skb, vxlan, fdb, 0, 0, type, 0, rd); if (err < 0) { /* -EMSGSIZE implies BUG in vxlan_nlmsg_size() */ WARN_ON(err == -EMSGSIZE); @@ -427,10 +426,7 @@ static void vxlan_ip_miss(struct net_device *dev, union vxlan_addr *ipa) .remote_vni = VXLAN_N_VID, }; - INIT_LIST_HEAD(&f.remotes); - list_add_rcu(&remote.list, &f.remotes); - - vxlan_fdb_notify(vxlan, &f, RTM_GETNEIGH); + vxlan_fdb_notify(vxlan, &f, &remote, RTM_GETNEIGH); } static void vxlan_fdb_miss(struct vxlan_dev *vxlan, const u8 eth_addr[ETH_ALEN]) @@ -438,11 +434,11 @@ static void vxlan_fdb_miss(struct vxlan_dev *vxlan, const u8 eth_addr[ETH_ALEN]) struct vxlan_fdb f = { .state = NUD_STALE, }; + struct vxlan_rdst remote = { }; - INIT_LIST_HEAD(&f.remotes); memcpy(f.eth_addr, eth_addr, ETH_ALEN); - vxlan_fdb_notify(vxlan, &f, RTM_GETNEIGH); + vxlan_fdb_notify(vxlan, &f, &remote, RTM_GETNEIGH); } /* Hash Ethernet address */ @@ -533,7 +529,8 @@ static int vxlan_fdb_replace(struct vxlan_fdb *f, /* Add/update destinations for multicast */ static int vxlan_fdb_append(struct vxlan_fdb *f, - union vxlan_addr *ip, __be16 port, __u32 vni, __u32 ifindex) + union vxlan_addr *ip, __be16 port, __u32 vni, + __u32 ifindex, struct vxlan_rdst **rdp) { struct vxlan_rdst *rd; @@ -551,6 +548,7 @@ static int vxlan_fdb_append(struct vxlan_fdb *f, list_add_tail_rcu(&rd->list, &f->remotes); + *rdp = rd; return 1; } @@ -690,6 +688,7 @@ static int vxlan_fdb_create(struct vxlan_dev *vxlan, __be16 port, __u32 vni, __u32 ifindex, __u8 ndm_flags) { + struct vxlan_rdst *rd = NULL; struct vxlan_fdb *f; int notify = 0; @@ -726,7 +725,8 @@ static int vxlan_fdb_create(struct vxlan_dev *vxlan, if ((flags & NLM_F_APPEND) && (is_multicast_ether_addr(f->eth_addr) || is_zero_ether_addr(f->eth_addr))) { - int rc = vxlan_fdb_append(f, ip, port, vni, ifindex); + int rc = vxlan_fdb_append(f, ip, port, vni, ifindex, + &rd); if (rc < 0) return rc; @@ -756,15 +756,18 @@ static int vxlan_fdb_create(struct vxlan_dev *vxlan, INIT_LIST_HEAD(&f->remotes); memcpy(f->eth_addr, mac, ETH_ALEN); - vxlan_fdb_append(f, ip, port, vni, ifindex); + vxlan_fdb_append(f, ip, port, vni, ifindex, &rd); ++vxlan->addrcnt; hlist_add_head_rcu(&f->hlist, vxlan_fdb_head(vxlan, mac)); } - if (notify) - vxlan_fdb_notify(vxlan, f, RTM_NEWNEIGH); + if (notify) { + if (rd == NULL) + rd = first_remote_rtnl(f); + vxlan_fdb_notify(vxlan, f, rd, RTM_NEWNEIGH); + } return 0; } @@ -785,7 +788,7 @@ static void vxlan_fdb_destroy(struct vxlan_dev *vxlan, struct vxlan_fdb *f) "delete %pM\n", f->eth_addr); --vxlan->addrcnt; - vxlan_fdb_notify(vxlan, f, RTM_DELNEIGH); + vxlan_fdb_notify(vxlan, f, first_remote_rtnl(f), RTM_DELNEIGH); hlist_del_rcu(&f->hlist); call_rcu(&f->rcu, vxlan_fdb_free); @@ -919,6 +922,7 @@ static int vxlan_fdb_delete(struct ndmsg *ndm, struct nlattr *tb[], */ if (rd && !list_is_singular(&f->remotes)) { list_del_rcu(&rd->list); + vxlan_fdb_notify(vxlan, f, rd, RTM_DELNEIGH); kfree_rcu(rd, rcu); goto out; } @@ -993,7 +997,7 @@ static bool vxlan_snoop(struct net_device *dev, rdst->remote_ip = *src_ip; f->updated = jiffies; - vxlan_fdb_notify(vxlan, f, RTM_NEWNEIGH); + vxlan_fdb_notify(vxlan, f, rdst, RTM_NEWNEIGH); } else { /* learned new entry */ spin_lock(&vxlan->hash_lock); -- cgit v1.2.1 From 2704f807f9498054b8153002bafa3e818079e9a5 Mon Sep 17 00:00:00 2001 From: H Hartley Sweeten Date: Fri, 28 Mar 2014 09:20:58 -0700 Subject: staging: comedi: usbdux: bug fix for accessing 'ao_chanlist' in private data In usbdux_ao_cmd(), the channels for the command are transfered from the cmd->chanlist and stored in the private data 'ao_chanlist'. The channel numbers are bit-shifted when stored so that they become the "command" that is transfered to the device. The channel to command conversion results in the 'ao_chanlist' having these values for the channels: channel 0 -> ao_chanlist = 0x00 channel 1 -> ao_chanlist = 0x40 channel 2 -> ao_chanlist = 0x80 channel 3 -> ao_chanlist = 0xc0 The problem is, the usbduxsub_ao_isoc_irq() function uses the 'chan' value from 'ao_chanlist' to access the 'ao_readback' array in the private data. So instead of accessing the array as 0, 1, 2, 3, it accesses it as 0x00, 0x40, 0x80, 0xc0. Fix this by storing the raw channel number in 'ao_chanlist' and doing the bit-shift when creating the command. Fixes: a998a3db530bff80 "staging: comedi: usbdux: cleanup the private data 'outBuffer'" Cc: stable # 3.12 Signed-off-by: H Hartley Sweeten Reviewed-by: Ian Abbott Acked-by: Bernd Porr Signed-off-by: Greg Kroah-Hartman --- drivers/staging/comedi/drivers/usbdux.c | 9 +++------ 1 file changed, 3 insertions(+), 6 deletions(-) (limited to 'drivers') diff --git a/drivers/staging/comedi/drivers/usbdux.c b/drivers/staging/comedi/drivers/usbdux.c index 71db683098d6..b59af0303581 100644 --- a/drivers/staging/comedi/drivers/usbdux.c +++ b/drivers/staging/comedi/drivers/usbdux.c @@ -493,7 +493,7 @@ static void usbduxsub_ao_isoc_irq(struct urb *urb) /* pointer to the DA */ *datap++ = val & 0xff; *datap++ = (val >> 8) & 0xff; - *datap++ = chan; + *datap++ = chan << 6; devpriv->ao_readback[chan] = val; s->async->events |= COMEDI_CB_BLOCK; @@ -1040,11 +1040,8 @@ static int usbdux_ao_cmd(struct comedi_device *dev, struct comedi_subdevice *s) /* set current channel of the running acquisition to zero */ s->async->cur_chan = 0; - for (i = 0; i < cmd->chanlist_len; ++i) { - unsigned int chan = CR_CHAN(cmd->chanlist[i]); - - devpriv->ao_chanlist[i] = chan << 6; - } + for (i = 0; i < cmd->chanlist_len; ++i) + devpriv->ao_chanlist[i] = CR_CHAN(cmd->chanlist[i]); /* we count in steps of 1ms (125us) */ /* 125us mode not used yet */ -- cgit v1.2.1 From 27a38856a948c3e8de30dc71647ff9e1778c99fc Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Wed, 23 Apr 2014 13:02:35 -0700 Subject: Input: synaptics - add min/max quirk for ThinkPad Edge E431 Cc: stable@vger.kernel.org Signed-off-by: Hans de Goede Signed-off-by: Dmitry Torokhov --- drivers/input/mouse/synaptics.c | 8 ++++++++ 1 file changed, 8 insertions(+) (limited to 'drivers') diff --git a/drivers/input/mouse/synaptics.c b/drivers/input/mouse/synaptics.c index ef9f4913450d..d68d33fb5ac2 100644 --- a/drivers/input/mouse/synaptics.c +++ b/drivers/input/mouse/synaptics.c @@ -1565,6 +1565,14 @@ static const struct dmi_system_id min_max_dmi_table[] __initconst = { }, .driver_data = (int []){1232, 5710, 1156, 4696}, }, + { + /* Lenovo ThinkPad Edge E431 */ + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"), + DMI_MATCH(DMI_PRODUCT_VERSION, "ThinkPad Edge E431"), + }, + .driver_data = (int []){1024, 5022, 2508, 4832}, + }, { /* Lenovo ThinkPad T431s */ .matches = { -- cgit v1.2.1 From cb171f7abb9a1a250fb41d088b81799f75bd1357 Mon Sep 17 00:00:00 2001 From: Bjorn Helgaas Date: Wed, 23 Apr 2014 10:21:06 -0600 Subject: PNP: Work around BIOS defects in Intel MCH area reporting Work around BIOSes that don't report the entire Intel MCH area. MCHBAR is not an architected PCI BAR, so MCH space is usually reported as a PNP0C02 resource. The MCH space was once 16KB, but is 32KB in newer parts. Some BIOSes still report a PNP0C02 resource that is only 16KB, which means the rest of the MCH space is consumed but unreported. This can cause resource map sanity check warnings or (theoretically) a device conflict if we assigned the unreported space to another device. The Intel perf event uncore driver tripped over this when it claimed the MCH region: resource map sanity check conflict: 0xfed10000 0xfed15fff 0xfed10000 0xfed13fff pnp 00:01 Info: mapping multiple BARs. Your kernel is fine. To prevent this, if we find a PNP0C02 resource that covers part of the MCH space, extend it to cover the entire space. References: http://lkml.kernel.org/r/20140224162400.GE16457@pd.tnic Reported-and-tested-by: Borislav Petkov Signed-off-by: Bjorn Helgaas Acked-by: Borislav Petkov Acked-by: Stephane Eranian Signed-off-by: Rafael J. Wysocki --- drivers/pnp/quirks.c | 79 ++++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 79 insertions(+) (limited to 'drivers') diff --git a/drivers/pnp/quirks.c b/drivers/pnp/quirks.c index 258fef272ea7..3736bc408adb 100644 --- a/drivers/pnp/quirks.c +++ b/drivers/pnp/quirks.c @@ -15,6 +15,7 @@ #include #include +#include #include #include #include @@ -334,6 +335,81 @@ static void quirk_amd_mmconfig_area(struct pnp_dev *dev) } #endif +#ifdef CONFIG_X86 +/* Device IDs of parts that have 32KB MCH space */ +static const unsigned int mch_quirk_devices[] = { + 0x0154, /* Ivy Bridge */ + 0x0c00, /* Haswell */ +}; + +static struct pci_dev *get_intel_host(void) +{ + int i; + struct pci_dev *host; + + for (i = 0; i < ARRAY_SIZE(mch_quirk_devices); i++) { + host = pci_get_device(PCI_VENDOR_ID_INTEL, mch_quirk_devices[i], + NULL); + if (host) + return host; + } + return NULL; +} + +static void quirk_intel_mch(struct pnp_dev *dev) +{ + struct pci_dev *host; + u32 addr_lo, addr_hi; + struct pci_bus_region region; + struct resource mch; + struct pnp_resource *pnp_res; + struct resource *res; + + host = get_intel_host(); + if (!host) + return; + + /* + * MCHBAR is not an architected PCI BAR, so MCH space is usually + * reported as a PNP0C02 resource. The MCH space was originally + * 16KB, but is 32KB in newer parts. Some BIOSes still report a + * PNP0C02 resource that is only 16KB, which means the rest of the + * MCH space is consumed but unreported. + */ + + /* + * Read MCHBAR for Host Member Mapped Register Range Base + * https://www-ssl.intel.com/content/www/us/en/processors/core/4th-gen-core-family-desktop-vol-2-datasheet + * Sec 3.1.12. + */ + pci_read_config_dword(host, 0x48, &addr_lo); + region.start = addr_lo & ~0x7fff; + pci_read_config_dword(host, 0x4c, &addr_hi); + region.start |= (u64) addr_hi << 32; + region.end = region.start + 32*1024 - 1; + + memset(&mch, 0, sizeof(mch)); + mch.flags = IORESOURCE_MEM; + pcibios_bus_to_resource(host->bus, &mch, ®ion); + + list_for_each_entry(pnp_res, &dev->resources, list) { + res = &pnp_res->res; + if (res->end < mch.start || res->start > mch.end) + continue; /* no overlap */ + if (res->start == mch.start && res->end == mch.end) + continue; /* exact match */ + + dev_info(&dev->dev, FW_BUG "PNP resource %pR covers only part of %s Intel MCH; extending to %pR\n", + res, pci_name(host), &mch); + res->start = mch.start; + res->end = mch.end; + break; + } + + pci_dev_put(host); +} +#endif + /* * PnP Quirks * Cards or devices that need some tweaking due to incomplete resource info @@ -363,6 +439,9 @@ static struct pnp_fixup pnp_fixups[] = { {"PNP0c02", quirk_system_pci_resources}, #ifdef CONFIG_AMD_NB {"PNP0c01", quirk_amd_mmconfig_area}, +#endif +#ifdef CONFIG_X86 + {"PNP0c02", quirk_intel_mch}, #endif {""} }; -- cgit v1.2.1 From b6d07e0273d3296cfbdc88145b8a00ddbefb310a Mon Sep 17 00:00:00 2001 From: Willy Tarreau Date: Fri, 18 Apr 2014 14:19:50 +0200 Subject: PCI: mvebu: fix off-by-one in the computed size of the mbus windows mvebu_pcie_handle_membase_change() and mvebu_pcie_handle_iobase_change() do not correctly compute the window size. PCI uses an inclusive start/end address pair, which requires a +1 when converting to size. This only worked because a bug in the mbus driver allowed it to silently accept and round up bogus sizes. Fix this by adding one to the computed size. Fixes: 45361a4fe446 ('PCIe driver for Marvell Armada 370/XP systems') Cc: # v3.11+ Signed-off-by: Willy Tarreau Reviewed-By: Jason Gunthorpe Signed-off-by: Thomas Petazzoni Link: https://lkml.kernel.org/r/1397823593-1932-5-git-send-email-thomas.petazzoni@free-electrons.com Tested-by: Neil Greatorex Acked-by: Bjorn Helgaas Signed-off-by: Jason Cooper --- drivers/pci/host/pci-mvebu.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/pci/host/pci-mvebu.c b/drivers/pci/host/pci-mvebu.c index d3d1cfd51e09..48299215cc59 100644 --- a/drivers/pci/host/pci-mvebu.c +++ b/drivers/pci/host/pci-mvebu.c @@ -331,7 +331,7 @@ static void mvebu_pcie_handle_iobase_change(struct mvebu_pcie_port *port) port->iowin_base = port->pcie->io.start + iobase; port->iowin_size = ((0xFFF | ((port->bridge.iolimit & 0xF0) << 8) | (port->bridge.iolimitupper << 16)) - - iobase); + iobase) + 1; mvebu_mbus_add_window_remap_by_id(port->io_target, port->io_attr, port->iowin_base, port->iowin_size, @@ -364,7 +364,7 @@ static void mvebu_pcie_handle_membase_change(struct mvebu_pcie_port *port) port->memwin_base = ((port->bridge.membase & 0xFFF0) << 16); port->memwin_size = (((port->bridge.memlimit & 0xFFF0) << 16) | 0xFFFFF) - - port->memwin_base; + port->memwin_base + 1; mvebu_mbus_add_window_by_id(port->mem_target, port->mem_attr, port->memwin_base, port->memwin_size); -- cgit v1.2.1 From 09752a12f430f58523fb6f435f5e30e4048fcfb2 Mon Sep 17 00:00:00 2001 From: Jason Gunthorpe Date: Fri, 18 Apr 2014 14:19:51 +0200 Subject: bus: mvebu-mbus: Avoid setting an undefined window size The mbus hardware requires a power of two size, and size aligned base. Currently, if a non-power of two is passed in to the low level routines they configure the register in a way that results in undefined behaviour. Call WARN and return EINVAL instead. Also, update the debugfs routines to show a message if there is an invalid register setting. All together this makes the recent problems with silent failure of PCI very obvious, noisy and debuggable. Signed-off-by: Jason Gunthorpe Signed-off-by: Thomas Petazzoni Link: https://lkml.kernel.org/r/1397823593-1932-6-git-send-email-thomas.petazzoni@free-electrons.com Signed-off-by: Jason Cooper --- drivers/bus/mvebu-mbus.c | 16 ++++++++++++++++ 1 file changed, 16 insertions(+) (limited to 'drivers') diff --git a/drivers/bus/mvebu-mbus.c b/drivers/bus/mvebu-mbus.c index 293e2e0a0a87..afee0f731111 100644 --- a/drivers/bus/mvebu-mbus.c +++ b/drivers/bus/mvebu-mbus.c @@ -56,6 +56,7 @@ #include #include #include +#include /* * DDR target is the same on all platforms. @@ -266,6 +267,17 @@ static int mvebu_mbus_setup_window(struct mvebu_mbus_state *mbus, mbus->soc->win_cfg_offset(win); u32 ctrl, remap_addr; + if (!is_power_of_2(size)) { + WARN(true, "Invalid MBus window size: 0x%zx\n", size); + return -EINVAL; + } + + if ((base & (phys_addr_t)(size - 1)) != 0) { + WARN(true, "Invalid MBus base/size: %pa len 0x%zx\n", &base, + size); + return -EINVAL; + } + ctrl = ((size - 1) & WIN_CTRL_SIZE_MASK) | (attr << WIN_CTRL_ATTR_SHIFT) | (target << WIN_CTRL_TGT_SHIFT) | @@ -413,6 +425,10 @@ static int mvebu_devs_debug_show(struct seq_file *seq, void *v) win, (unsigned long long)wbase, (unsigned long long)(wbase + wsize), wtarget, wattr); + if (!is_power_of_2(wsize) || + ((wbase & (u64)(wsize - 1)) != 0)) + seq_puts(seq, " (Invalid base/size!!)"); + if (win < mbus->soc->num_remappable_wins) { seq_printf(seq, " (remap %016llx)\n", (unsigned long long)wremap); -- cgit v1.2.1 From b566e782be32145664d96ada3e389f17d32742e5 Mon Sep 17 00:00:00 2001 From: Thomas Petazzoni Date: Fri, 18 Apr 2014 14:19:52 +0200 Subject: bus: mvebu-mbus: allow several windows with the same target/attribute Having multiple windows with the same target and attribute is actually legal, and can be useful for PCIe windows, when PCIe BARs have a size that isn't a power of two, and we therefore need to create several MBus windows to cover the PCIe BAR for a given PCIe interface. Fixes: fddddb52a6c4 ('bus: introduce an Marvell EBU MBus driver') Cc: # v3.10+ Signed-off-by: Thomas Petazzoni Link: https://lkml.kernel.org/r/1397823593-1932-7-git-send-email-thomas.petazzoni@free-electrons.com Tested-by: Neil Greatorex Signed-off-by: Jason Cooper --- drivers/bus/mvebu-mbus.c | 6 ------ 1 file changed, 6 deletions(-) (limited to 'drivers') diff --git a/drivers/bus/mvebu-mbus.c b/drivers/bus/mvebu-mbus.c index afee0f731111..00b73448b22e 100644 --- a/drivers/bus/mvebu-mbus.c +++ b/drivers/bus/mvebu-mbus.c @@ -223,12 +223,6 @@ static int mvebu_mbus_window_conflicts(struct mvebu_mbus_state *mbus, */ if ((u64)base < wend && end > wbase) return 0; - - /* - * Check if target/attribute conflicts - */ - if (target == wtarget && attr == wattr) - return 0; } return 1; -- cgit v1.2.1 From 398f5d5e10b6b917cd9d35ef21d545b0afbada22 Mon Sep 17 00:00:00 2001 From: Thomas Petazzoni Date: Fri, 18 Apr 2014 14:19:53 +0200 Subject: PCI: mvebu: split PCIe BARs into multiple MBus windows when needed MBus windows are used on Marvell platforms to map certain peripherals in the physical address space. In the PCIe context, MBus windows are needed to map PCIe I/O and memory regions in the physical address. However, those MBus windows can only have power of two sizes, while PCIe BAR do not necessarily guarantee this. For this reason, the current pci-mvebu breaks on platforms where PCIe devices have BARs that don't sum up to a power of two size at the emulated bridge level. This commit fixes this by allowing the pci-mvebu driver to create multiple contiguous MBus windows (each having a power of two size) to cover a given PCIe BAR. To achieve this, two functions are added: mvebu_pcie_add_windows() and mvebu_pcie_del_windows() to respectively add and remove all the MBus windows that are needed to map the provided PCIe region base and size. The emulated PCI bridge code now calls those functions, instead of directly calling the mvebu-mbus driver functions. Fixes: 45361a4fe446 ('pci: PCIe driver for Marvell Armada 370/XP systems') Cc: # v3.11+ Signed-off-by: Thomas Petazzoni Link: https://lkml.kernel.org/r/1397823593-1932-8-git-send-email-thomas.petazzoni@free-electrons.com Tested-by: Neil Greatorex Acked-by: Bjorn Helgaas Signed-off-by: Jason Cooper --- drivers/pci/host/pci-mvebu.c | 88 +++++++++++++++++++++++++++++++++++++------- 1 file changed, 74 insertions(+), 14 deletions(-) (limited to 'drivers') diff --git a/drivers/pci/host/pci-mvebu.c b/drivers/pci/host/pci-mvebu.c index 48299215cc59..e384e2534594 100644 --- a/drivers/pci/host/pci-mvebu.c +++ b/drivers/pci/host/pci-mvebu.c @@ -293,6 +293,58 @@ static int mvebu_pcie_hw_wr_conf(struct mvebu_pcie_port *port, return PCIBIOS_SUCCESSFUL; } +/* + * Remove windows, starting from the largest ones to the smallest + * ones. + */ +static void mvebu_pcie_del_windows(struct mvebu_pcie_port *port, + phys_addr_t base, size_t size) +{ + while (size) { + size_t sz = 1 << (fls(size) - 1); + + mvebu_mbus_del_window(base, sz); + base += sz; + size -= sz; + } +} + +/* + * MBus windows can only have a power of two size, but PCI BARs do not + * have this constraint. Therefore, we have to split the PCI BAR into + * areas each having a power of two size. We start from the largest + * one (i.e highest order bit set in the size). + */ +static void mvebu_pcie_add_windows(struct mvebu_pcie_port *port, + unsigned int target, unsigned int attribute, + phys_addr_t base, size_t size, + phys_addr_t remap) +{ + size_t size_mapped = 0; + + while (size) { + size_t sz = 1 << (fls(size) - 1); + int ret; + + ret = mvebu_mbus_add_window_remap_by_id(target, attribute, base, + sz, remap); + if (ret) { + dev_err(&port->pcie->pdev->dev, + "Could not create MBus window at 0x%x, size 0x%x: %d\n", + base, sz, ret); + mvebu_pcie_del_windows(port, base - size_mapped, + size_mapped); + return; + } + + size -= sz; + size_mapped += sz; + base += sz; + if (remap != MVEBU_MBUS_NO_REMAP) + remap += sz; + } +} + static void mvebu_pcie_handle_iobase_change(struct mvebu_pcie_port *port) { phys_addr_t iobase; @@ -304,8 +356,8 @@ static void mvebu_pcie_handle_iobase_change(struct mvebu_pcie_port *port) /* If a window was configured, remove it */ if (port->iowin_base) { - mvebu_mbus_del_window(port->iowin_base, - port->iowin_size); + mvebu_pcie_del_windows(port, port->iowin_base, + port->iowin_size); port->iowin_base = 0; port->iowin_size = 0; } @@ -333,9 +385,9 @@ static void mvebu_pcie_handle_iobase_change(struct mvebu_pcie_port *port) (port->bridge.iolimitupper << 16)) - iobase) + 1; - mvebu_mbus_add_window_remap_by_id(port->io_target, port->io_attr, - port->iowin_base, port->iowin_size, - iobase); + mvebu_pcie_add_windows(port, port->io_target, port->io_attr, + port->iowin_base, port->iowin_size, + iobase); } static void mvebu_pcie_handle_membase_change(struct mvebu_pcie_port *port) @@ -346,8 +398,8 @@ static void mvebu_pcie_handle_membase_change(struct mvebu_pcie_port *port) /* If a window was configured, remove it */ if (port->memwin_base) { - mvebu_mbus_del_window(port->memwin_base, - port->memwin_size); + mvebu_pcie_del_windows(port, port->memwin_base, + port->memwin_size); port->memwin_base = 0; port->memwin_size = 0; } @@ -366,8 +418,9 @@ static void mvebu_pcie_handle_membase_change(struct mvebu_pcie_port *port) (((port->bridge.memlimit & 0xFFF0) << 16) | 0xFFFFF) - port->memwin_base + 1; - mvebu_mbus_add_window_by_id(port->mem_target, port->mem_attr, - port->memwin_base, port->memwin_size); + mvebu_pcie_add_windows(port, port->mem_target, port->mem_attr, + port->memwin_base, port->memwin_size, + MVEBU_MBUS_NO_REMAP); } /* @@ -743,14 +796,21 @@ static resource_size_t mvebu_pcie_align_resource(struct pci_dev *dev, /* * On the PCI-to-PCI bridge side, the I/O windows must have at - * least a 64 KB size and be aligned on their size, and the - * memory windows must have at least a 1 MB size and be - * aligned on their size + * least a 64 KB size and the memory windows must have at + * least a 1 MB size. Moreover, MBus windows need to have a + * base address aligned on their size, and their size must be + * a power of two. This means that if the BAR doesn't have a + * power of two size, several MBus windows will actually be + * created. We need to ensure that the biggest MBus window + * (which will be the first one) is aligned on its size, which + * explains the rounddown_pow_of_two() being done here. */ if (res->flags & IORESOURCE_IO) - return round_up(start, max_t(resource_size_t, SZ_64K, size)); + return round_up(start, max_t(resource_size_t, SZ_64K, + rounddown_pow_of_two(size))); else if (res->flags & IORESOURCE_MEM) - return round_up(start, max_t(resource_size_t, SZ_1M, size)); + return round_up(start, max_t(resource_size_t, SZ_1M, + rounddown_pow_of_two(size))); else return start; } -- cgit v1.2.1 From cbd75e97a525e3819c02dc18bc2d67aa544c9e45 Mon Sep 17 00:00:00 2001 From: Thomas Hellstrom Date: Tue, 15 Apr 2014 18:25:48 +0200 Subject: drm/vmwgfx: Make sure user-space can't DMA across buffer object boundaries v2 We already check that the buffer object we're accessing is registered with the file. Now also make sure that we can't DMA across buffer object boundaries. v2: Code commenting update. Cc: stable@vger.kernel.org Signed-off-by: Thomas Hellstrom Reviewed-by: Jakob Bornecrantz --- drivers/gpu/drm/vmwgfx/vmwgfx_execbuf.c | 22 ++++++++++++++++++++++ 1 file changed, 22 insertions(+) (limited to 'drivers') diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_execbuf.c b/drivers/gpu/drm/vmwgfx/vmwgfx_execbuf.c index 931490b9cfed..87df0b3674fd 100644 --- a/drivers/gpu/drm/vmwgfx/vmwgfx_execbuf.c +++ b/drivers/gpu/drm/vmwgfx/vmwgfx_execbuf.c @@ -1214,14 +1214,36 @@ static int vmw_cmd_dma(struct vmw_private *dev_priv, SVGA3dCmdSurfaceDMA dma; } *cmd; int ret; + SVGA3dCmdSurfaceDMASuffix *suffix; + uint32_t bo_size; cmd = container_of(header, struct vmw_dma_cmd, header); + suffix = (SVGA3dCmdSurfaceDMASuffix *)((unsigned long) &cmd->dma + + header->size - sizeof(*suffix)); + + /* Make sure device and verifier stays in sync. */ + if (unlikely(suffix->suffixSize != sizeof(*suffix))) { + DRM_ERROR("Invalid DMA suffix size.\n"); + return -EINVAL; + } + ret = vmw_translate_guest_ptr(dev_priv, sw_context, &cmd->dma.guest.ptr, &vmw_bo); if (unlikely(ret != 0)) return ret; + /* Make sure DMA doesn't cross BO boundaries. */ + bo_size = vmw_bo->base.num_pages * PAGE_SIZE; + if (unlikely(cmd->dma.guest.ptr.offset > bo_size)) { + DRM_ERROR("Invalid DMA offset.\n"); + return -EINVAL; + } + + bo_size -= cmd->dma.guest.ptr.offset; + if (unlikely(suffix->maximumOffset > bo_size)) + suffix->maximumOffset = bo_size; + ret = vmw_cmd_res_check(dev_priv, sw_context, vmw_res_surface, user_surface_converter, &cmd->dma.host.sid, NULL); -- cgit v1.2.1 From 7c7606a2464fee1cf50efef34aa44aee1edf453a Mon Sep 17 00:00:00 2001 From: Tomas Sokorai Date: Wed, 23 Apr 2014 10:42:41 -0400 Subject: HID: multitouch: add support of EliteGroup 05D8 panels They need to have the class SERIAL. Note: it is a Win 7 panel, not Win 8 certified. Signed-off-by: Tomas Sokorai Signed-off-by: Benjamin Tissoires Signed-off-by: Jiri Kosina --- drivers/hid/hid-ids.h | 3 +++ drivers/hid/hid-multitouch.c | 5 +++++ 2 files changed, 8 insertions(+) (limited to 'drivers') diff --git a/drivers/hid/hid-ids.h b/drivers/hid/hid-ids.h index c8af7202c28d..e7e44f53db59 100644 --- a/drivers/hid/hid-ids.h +++ b/drivers/hid/hid-ids.h @@ -301,6 +301,9 @@ #define USB_VENDOR_ID_DREAM_CHEEKY 0x1d34 +#define USB_VENDOR_ID_ELITEGROUP 0x03fc +#define USB_DEVICE_ID_ELITEGROUP_05D8 0x05d8 + #define USB_VENDOR_ID_ELO 0x04E7 #define USB_DEVICE_ID_ELO_TS2515 0x0022 #define USB_DEVICE_ID_ELO_TS2700 0x0020 diff --git a/drivers/hid/hid-multitouch.c b/drivers/hid/hid-multitouch.c index 35278e43c7a4..51e25b9407f2 100644 --- a/drivers/hid/hid-multitouch.c +++ b/drivers/hid/hid-multitouch.c @@ -1155,6 +1155,11 @@ static const struct hid_device_id mt_devices[] = { MT_USB_DEVICE(USB_VENDOR_ID_DWAV, USB_DEVICE_ID_DWAV_EGALAX_MULTITOUCH_A001) }, + /* Elitegroup panel */ + { .driver_data = MT_CLS_SERIAL, + MT_USB_DEVICE(USB_VENDOR_ID_ELITEGROUP, + USB_DEVICE_ID_ELITEGROUP_05D8) }, + /* Flatfrog Panels */ { .driver_data = MT_CLS_FLATFROG, MT_USB_DEVICE(USB_VENDOR_ID_FLATFROG, -- cgit v1.2.1 From edd586fe705e819bc711b5ed7194a0b6f9f1a7e1 Mon Sep 17 00:00:00 2001 From: Chris Wilson Date: Wed, 23 Apr 2014 08:54:31 +0100 Subject: drm/i915: Discard BIOS framebuffers too small to accommodate chosen mode MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit If the inherited BIOS framebuffer is smaller than the mode selected for fbdev, then if we continue to use it then we cause display corruption as we do not setup the panel fitter to upscale. Regression from commit d978ef14456a38034f6c0e94a794129501f89200 Author: Jesse Barnes Date: Fri Mar 7 08:57:51 2014 -0800 drm/i915: Wrap the preallocated BIOS framebuffer and preserve for KMS fbcon v12 v2: Add a debug message to track the discard of the BIOS fb. v3: Ville pointed out the difference between ref/unref Reported-by: Knut Petersen Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=77767 Signed-off-by: Chris Wilson Cc: Jesse Barnes Reviewed-by: Daniel Vetter Reviewed-by: Ville Syrjälä Signed-off-by: Jani Nikula --- drivers/gpu/drm/i915/intel_fbdev.c | 10 ++++++++++ 1 file changed, 10 insertions(+) (limited to 'drivers') diff --git a/drivers/gpu/drm/i915/intel_fbdev.c b/drivers/gpu/drm/i915/intel_fbdev.c index b4d44e62f0c7..fce4a0d93c0b 100644 --- a/drivers/gpu/drm/i915/intel_fbdev.c +++ b/drivers/gpu/drm/i915/intel_fbdev.c @@ -132,6 +132,16 @@ static int intelfb_create(struct drm_fb_helper *helper, mutex_lock(&dev->struct_mutex); + if (intel_fb && + (sizes->fb_width > intel_fb->base.width || + sizes->fb_height > intel_fb->base.height)) { + DRM_DEBUG_KMS("BIOS fb too small (%dx%d), we require (%dx%d)," + " releasing it\n", + intel_fb->base.width, intel_fb->base.height, + sizes->fb_width, sizes->fb_height); + drm_framebuffer_unreference(&intel_fb->base); + intel_fb = ifbdev->fb = NULL; + } if (!intel_fb || WARN_ON(!intel_fb->obj)) { DRM_DEBUG_KMS("no BIOS fb, allocating a new one\n"); ret = intelfb_alloc(helper, sizes); -- cgit v1.2.1 From 0f9dc59db6abc475dc23afc077fabbc606b8830f Mon Sep 17 00:00:00 2001 From: Ben Widawsky Date: Mon, 24 Mar 2014 18:06:00 -0700 Subject: drm/i915: Allow full PPGTT with param override When PPGTT was disabled by default, the patch also prevented the user from overriding this behavior via module parameter. Being able to test this on arbitrary kernels is extremely beneficial to track down the remaining bugs. The patch that prevented this was: commit 93a25a9e2d67765c3092bfaac9b855d95e39df97 Author: Daniel Vetter Date: Thu Mar 6 09:40:43 2014 +0100 drm/i915: Disable full ppgtt by default By default PPGTT is set to -1. 0 means off, 1 means aliasing only, 2 means full, all other values are reserved. Signed-off-by: Ben Widawsky Signed-off-by: Daniel Vetter Signed-off-by: Jani Nikula --- drivers/gpu/drm/i915/i915_gem_gtt.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/i915/i915_gem_gtt.c b/drivers/gpu/drm/i915/i915_gem_gtt.c index ab5e93c30aa2..62a5c3627b90 100644 --- a/drivers/gpu/drm/i915/i915_gem_gtt.c +++ b/drivers/gpu/drm/i915/i915_gem_gtt.c @@ -50,7 +50,7 @@ bool intel_enable_ppgtt(struct drm_device *dev, bool full) /* Full ppgtt disabled by default for now due to issues. */ if (full) - return false; /* HAS_PPGTT(dev) */ + return HAS_PPGTT(dev) && (i915.enable_ppgtt == 2); else return HAS_ALIASING_PPGTT(dev); } -- cgit v1.2.1 From 6b4ed8b00e93bd31f24a25f59ed8d1b808d0cc00 Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Thu, 7 Nov 2013 08:08:44 +0000 Subject: clk: vexpress: NULL dereference on error path If the allocation fails then we dereference the NULL in the error path. Just return directly. Fixes: ed27ff1db869 ('clk: Versatile Express clock generators ("osc") driver') Signed-off-by: Dan Carpenter Signed-off-by: Pawel Moll --- drivers/clk/versatile/clk-vexpress-osc.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/clk/versatile/clk-vexpress-osc.c b/drivers/clk/versatile/clk-vexpress-osc.c index 2dc8b41a339d..a535c7bf8574 100644 --- a/drivers/clk/versatile/clk-vexpress-osc.c +++ b/drivers/clk/versatile/clk-vexpress-osc.c @@ -102,7 +102,7 @@ void __init vexpress_osc_of_setup(struct device_node *node) osc = kzalloc(sizeof(*osc), GFP_KERNEL); if (!osc) - goto error; + return; osc->func = vexpress_config_func_get_by_node(node); if (!osc->func) { -- cgit v1.2.1 From 52feaca5d685c07a4bc9812d16d84f5f7991bfe7 Mon Sep 17 00:00:00 2001 From: Pawel Moll Date: Wed, 23 Apr 2014 18:27:04 +0100 Subject: hwmon: (vexpress) Use legal hwmon device names The driver used to directly us a DT 'compatible' property for the 'name' attribute of the hwmon devices. Unfortunately it contains '-' which is illegal in this context. It messes up libsensors and thus every application using it. Fixed by providing equivalent (and simpler) name strings. Reported-by: Guenter Roeck Signed-off-by: Pawel Moll Signed-off-by: Guenter Roeck --- drivers/hwmon/vexpress.c | 61 +++++++++++++++++++++++++++++++++++++++++------- 1 file changed, 52 insertions(+), 9 deletions(-) (limited to 'drivers') diff --git a/drivers/hwmon/vexpress.c b/drivers/hwmon/vexpress.c index d867e6bb2be1..7f9690560f40 100644 --- a/drivers/hwmon/vexpress.c +++ b/drivers/hwmon/vexpress.c @@ -27,15 +27,15 @@ struct vexpress_hwmon_data { struct device *hwmon_dev; struct vexpress_config_func *func; + const char *name; }; static ssize_t vexpress_hwmon_name_show(struct device *dev, struct device_attribute *dev_attr, char *buffer) { - const char *compatible = of_get_property(dev->of_node, "compatible", - NULL); + struct vexpress_hwmon_data *data = dev_get_drvdata(dev); - return sprintf(buffer, "%s\n", compatible); + return sprintf(buffer, "%s\n", data->name); } static ssize_t vexpress_hwmon_label_show(struct device *dev, @@ -94,6 +94,11 @@ struct attribute *vexpress_hwmon_attrs_##_name[] = { \ NULL \ } +struct vexpress_hwmon_type { + const char *name; + const struct attribute_group **attr_groups; +}; + #if !defined(CONFIG_REGULATOR_VEXPRESS) static DEVICE_ATTR(in1_label, S_IRUGO, vexpress_hwmon_label_show, NULL); static SENSOR_DEVICE_ATTR(in1_input, S_IRUGO, vexpress_hwmon_u32_show, @@ -102,6 +107,13 @@ static VEXPRESS_HWMON_ATTRS(volt, in1_label, in1_input); static struct attribute_group vexpress_hwmon_group_volt = { .attrs = vexpress_hwmon_attrs_volt, }; +static struct vexpress_hwmon_type vexpress_hwmon_volt = { + .name = "vexpress_volt", + .attr_groups = (const struct attribute_group *[]) { + &vexpress_hwmon_group_volt, + NULL, + }, +}; #endif static DEVICE_ATTR(curr1_label, S_IRUGO, vexpress_hwmon_label_show, NULL); @@ -111,6 +123,13 @@ static VEXPRESS_HWMON_ATTRS(amp, curr1_label, curr1_input); static struct attribute_group vexpress_hwmon_group_amp = { .attrs = vexpress_hwmon_attrs_amp, }; +static struct vexpress_hwmon_type vexpress_hwmon_amp = { + .name = "vexpress_amp", + .attr_groups = (const struct attribute_group *[]) { + &vexpress_hwmon_group_amp, + NULL + }, +}; static DEVICE_ATTR(temp1_label, S_IRUGO, vexpress_hwmon_label_show, NULL); static SENSOR_DEVICE_ATTR(temp1_input, S_IRUGO, vexpress_hwmon_u32_show, @@ -119,6 +138,13 @@ static VEXPRESS_HWMON_ATTRS(temp, temp1_label, temp1_input); static struct attribute_group vexpress_hwmon_group_temp = { .attrs = vexpress_hwmon_attrs_temp, }; +static struct vexpress_hwmon_type vexpress_hwmon_temp = { + .name = "vexpress_temp", + .attr_groups = (const struct attribute_group *[]) { + &vexpress_hwmon_group_temp, + NULL + }, +}; static DEVICE_ATTR(power1_label, S_IRUGO, vexpress_hwmon_label_show, NULL); static SENSOR_DEVICE_ATTR(power1_input, S_IRUGO, vexpress_hwmon_u32_show, @@ -127,6 +153,13 @@ static VEXPRESS_HWMON_ATTRS(power, power1_label, power1_input); static struct attribute_group vexpress_hwmon_group_power = { .attrs = vexpress_hwmon_attrs_power, }; +static struct vexpress_hwmon_type vexpress_hwmon_power = { + .name = "vexpress_power", + .attr_groups = (const struct attribute_group *[]) { + &vexpress_hwmon_group_power, + NULL + }, +}; static DEVICE_ATTR(energy1_label, S_IRUGO, vexpress_hwmon_label_show, NULL); static SENSOR_DEVICE_ATTR(energy1_input, S_IRUGO, vexpress_hwmon_u64_show, @@ -135,26 +168,33 @@ static VEXPRESS_HWMON_ATTRS(energy, energy1_label, energy1_input); static struct attribute_group vexpress_hwmon_group_energy = { .attrs = vexpress_hwmon_attrs_energy, }; +static struct vexpress_hwmon_type vexpress_hwmon_energy = { + .name = "vexpress_energy", + .attr_groups = (const struct attribute_group *[]) { + &vexpress_hwmon_group_energy, + NULL + }, +}; static struct of_device_id vexpress_hwmon_of_match[] = { #if !defined(CONFIG_REGULATOR_VEXPRESS) { .compatible = "arm,vexpress-volt", - .data = &vexpress_hwmon_group_volt, + .data = &vexpress_hwmon_volt, }, #endif { .compatible = "arm,vexpress-amp", - .data = &vexpress_hwmon_group_amp, + .data = &vexpress_hwmon_amp, }, { .compatible = "arm,vexpress-temp", - .data = &vexpress_hwmon_group_temp, + .data = &vexpress_hwmon_temp, }, { .compatible = "arm,vexpress-power", - .data = &vexpress_hwmon_group_power, + .data = &vexpress_hwmon_power, }, { .compatible = "arm,vexpress-energy", - .data = &vexpress_hwmon_group_energy, + .data = &vexpress_hwmon_energy, }, {} }; @@ -165,6 +205,7 @@ static int vexpress_hwmon_probe(struct platform_device *pdev) int err; const struct of_device_id *match; struct vexpress_hwmon_data *data; + const struct vexpress_hwmon_type *type; data = devm_kzalloc(&pdev->dev, sizeof(*data), GFP_KERNEL); if (!data) @@ -174,12 +215,14 @@ static int vexpress_hwmon_probe(struct platform_device *pdev) match = of_match_device(vexpress_hwmon_of_match, &pdev->dev); if (!match) return -ENODEV; + type = match->data; + data->name = type->name; data->func = vexpress_config_func_get_by_dev(&pdev->dev); if (!data->func) return -ENODEV; - err = sysfs_create_group(&pdev->dev.kobj, match->data); + err = sysfs_create_groups(&pdev->dev.kobj, type->attr_groups); if (err) goto error; -- cgit v1.2.1 From b2e5411ee26bff1deefd0b2c7beec9c133632e65 Mon Sep 17 00:00:00 2001 From: Pawel Moll Date: Wed, 23 Apr 2014 18:27:05 +0100 Subject: hwmon: (vexpress) Avoid creating non-existing attributes The 'label' attribute was always created but returned -ENOENT if there is no label and such behaviour is undefined from libsensors' point of view. Fixed by providing is_visible method in the attributes group, so the attribute is not created at all when unnecessary. Reported-by: Guenter Roeck Signed-off-by: Pawel Moll Signed-off-by: Guenter Roeck --- drivers/hwmon/vexpress.c | 22 +++++++++++++++++++--- 1 file changed, 19 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/hwmon/vexpress.c b/drivers/hwmon/vexpress.c index 7f9690560f40..8242b75d96c8 100644 --- a/drivers/hwmon/vexpress.c +++ b/drivers/hwmon/vexpress.c @@ -43,9 +43,6 @@ static ssize_t vexpress_hwmon_label_show(struct device *dev, { const char *label = of_get_property(dev->of_node, "label", NULL); - if (!label) - return -ENOENT; - return snprintf(buffer, PAGE_SIZE, "%s\n", label); } @@ -84,6 +81,20 @@ static ssize_t vexpress_hwmon_u64_show(struct device *dev, to_sensor_dev_attr(dev_attr)->index)); } +static umode_t vexpress_hwmon_attr_is_visible(struct kobject *kobj, + struct attribute *attr, int index) +{ + struct device *dev = kobj_to_dev(kobj); + struct device_attribute *dev_attr = container_of(attr, + struct device_attribute, attr); + + if (dev_attr->show == vexpress_hwmon_label_show && + !of_get_property(dev->of_node, "label", NULL)) + return 0; + + return attr->mode; +} + static DEVICE_ATTR(name, S_IRUGO, vexpress_hwmon_name_show, NULL); #define VEXPRESS_HWMON_ATTRS(_name, _label_attr, _input_attr) \ @@ -105,6 +116,7 @@ static SENSOR_DEVICE_ATTR(in1_input, S_IRUGO, vexpress_hwmon_u32_show, NULL, 1000); static VEXPRESS_HWMON_ATTRS(volt, in1_label, in1_input); static struct attribute_group vexpress_hwmon_group_volt = { + .is_visible = vexpress_hwmon_attr_is_visible, .attrs = vexpress_hwmon_attrs_volt, }; static struct vexpress_hwmon_type vexpress_hwmon_volt = { @@ -121,6 +133,7 @@ static SENSOR_DEVICE_ATTR(curr1_input, S_IRUGO, vexpress_hwmon_u32_show, NULL, 1000); static VEXPRESS_HWMON_ATTRS(amp, curr1_label, curr1_input); static struct attribute_group vexpress_hwmon_group_amp = { + .is_visible = vexpress_hwmon_attr_is_visible, .attrs = vexpress_hwmon_attrs_amp, }; static struct vexpress_hwmon_type vexpress_hwmon_amp = { @@ -136,6 +149,7 @@ static SENSOR_DEVICE_ATTR(temp1_input, S_IRUGO, vexpress_hwmon_u32_show, NULL, 1000); static VEXPRESS_HWMON_ATTRS(temp, temp1_label, temp1_input); static struct attribute_group vexpress_hwmon_group_temp = { + .is_visible = vexpress_hwmon_attr_is_visible, .attrs = vexpress_hwmon_attrs_temp, }; static struct vexpress_hwmon_type vexpress_hwmon_temp = { @@ -151,6 +165,7 @@ static SENSOR_DEVICE_ATTR(power1_input, S_IRUGO, vexpress_hwmon_u32_show, NULL, 1); static VEXPRESS_HWMON_ATTRS(power, power1_label, power1_input); static struct attribute_group vexpress_hwmon_group_power = { + .is_visible = vexpress_hwmon_attr_is_visible, .attrs = vexpress_hwmon_attrs_power, }; static struct vexpress_hwmon_type vexpress_hwmon_power = { @@ -166,6 +181,7 @@ static SENSOR_DEVICE_ATTR(energy1_input, S_IRUGO, vexpress_hwmon_u64_show, NULL, 1); static VEXPRESS_HWMON_ATTRS(energy, energy1_label, energy1_input); static struct attribute_group vexpress_hwmon_group_energy = { + .is_visible = vexpress_hwmon_attr_is_visible, .attrs = vexpress_hwmon_attrs_energy, }; static struct vexpress_hwmon_type vexpress_hwmon_energy = { -- cgit v1.2.1 From 2b4c36612efac173397756398000921a7771fdda Mon Sep 17 00:00:00 2001 From: Daniel Vetter Date: Wed, 23 Apr 2014 15:15:32 +0200 Subject: drm/tegra: restrict plane loops to legacy planes In Matt Ropers primary plane series a set of prep patches like commit af2b653bfb4ef40931b4d101ca842ce0c5da57ef Author: Matt Roper Date: Tue Apr 1 15:22:32 2014 -0700 drm/i915: Restrict plane loops to only operate on overlay planes (v2) ensured that all exisiting users of the mode_config->plane_list wouldn't change behaviour. Unfortunately tegra seems to have fallen through the cracks. Fix it. This regression was introduced in commit e13161af80c185ecd8dc4641d0f5df58f9e3e0af Author: Matt Roper Date: Tue Apr 1 15:22:38 2014 -0700 drm: Add drm_crtc_init_with_planes() (v2) The result was that we've unref'ed the fb for the primary plane twice, leading to a use-after free bug. This is because the drm core will already set crtc->primary->fb to NULL and do the unref for us, and the crtc disable hook is called by the drm crtc helpers for exactly this case. Aside: Now that the fbdev helpers clean up planes there's no longer a need to do this in drivers. So this could probably be nuked entirely in linux-next. Signed-off-by: Daniel Vetter Reviewed-by: Matt Roper Tested-by: Stephen Warren Signed-off-by: Thierry Reding --- drivers/gpu/drm/tegra/dc.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/tegra/dc.c b/drivers/gpu/drm/tegra/dc.c index 36c717af6cf9..edb871d7d395 100644 --- a/drivers/gpu/drm/tegra/dc.c +++ b/drivers/gpu/drm/tegra/dc.c @@ -312,7 +312,7 @@ static void tegra_crtc_disable(struct drm_crtc *crtc) struct drm_device *drm = crtc->dev; struct drm_plane *plane; - list_for_each_entry(plane, &drm->mode_config.plane_list, head) { + drm_for_each_legacy_plane(plane, &drm->mode_config.plane_list) { if (plane->crtc == crtc) { tegra_plane_disable(plane); plane->crtc = NULL; -- cgit v1.2.1 From f75d72309192e52ef9a3efb390b1c4f408c142df Mon Sep 17 00:00:00 2001 From: Guenter Roeck Date: Mon, 21 Apr 2014 10:38:08 -0700 Subject: hwmon: (ltc2945) Don't crash the kernel unnecessarily An implementation error should not crash the kernel if it is avoidable. Replace BUG() with WARN_ONCE(). Signed-off-by: Guenter Roeck --- drivers/hwmon/ltc2945.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/hwmon/ltc2945.c b/drivers/hwmon/ltc2945.c index c104cc32989d..c9cddf5f056b 100644 --- a/drivers/hwmon/ltc2945.c +++ b/drivers/hwmon/ltc2945.c @@ -1,4 +1,4 @@ -/* + /* * Driver for Linear Technology LTC2945 I2C Power Monitor * * Copyright (c) 2014 Guenter Roeck @@ -314,8 +314,8 @@ static ssize_t ltc2945_reset_history(struct device *dev, reg = LTC2945_MAX_ADIN_H; break; default: - BUG(); - break; + WARN_ONCE(1, "Bad register: 0x%x\n", reg); + return -EINVAL; } /* Reset maximum */ ret = regmap_bulk_write(regmap, reg, buf_max, num_regs); -- cgit v1.2.1 From 9ba71705706aa83bcd7f9b74ae2d167da934c951 Mon Sep 17 00:00:00 2001 From: Stephen Warren Date: Tue, 1 Apr 2014 14:13:16 -0600 Subject: clk: tegra: remove non-existent clocks The Tegra124 clock driver currently provides 3 clocks that don't actually exist; 2 for NAND and one for UART5/UARTE. Delete these. Cc: Signed-off-by: Stephen Warren Signed-off-by: Arnd Bergmann --- drivers/clk/tegra/clk-tegra124.c | 3 --- 1 file changed, 3 deletions(-) (limited to 'drivers') diff --git a/drivers/clk/tegra/clk-tegra124.c b/drivers/clk/tegra/clk-tegra124.c index 166e02f16c8a..cc37c342c4cb 100644 --- a/drivers/clk/tegra/clk-tegra124.c +++ b/drivers/clk/tegra/clk-tegra124.c @@ -764,7 +764,6 @@ static struct tegra_clk tegra124_clks[tegra_clk_max] __initdata = { [tegra_clk_sdmmc2_8] = { .dt_id = TEGRA124_CLK_SDMMC2, .present = true }, [tegra_clk_i2s1] = { .dt_id = TEGRA124_CLK_I2S1, .present = true }, [tegra_clk_i2c1] = { .dt_id = TEGRA124_CLK_I2C1, .present = true }, - [tegra_clk_ndflash] = { .dt_id = TEGRA124_CLK_NDFLASH, .present = true }, [tegra_clk_sdmmc1_8] = { .dt_id = TEGRA124_CLK_SDMMC1, .present = true }, [tegra_clk_sdmmc4_8] = { .dt_id = TEGRA124_CLK_SDMMC4, .present = true }, [tegra_clk_pwm] = { .dt_id = TEGRA124_CLK_PWM, .present = true }, @@ -809,7 +808,6 @@ static struct tegra_clk tegra124_clks[tegra_clk_max] __initdata = { [tegra_clk_trace] = { .dt_id = TEGRA124_CLK_TRACE, .present = true }, [tegra_clk_soc_therm] = { .dt_id = TEGRA124_CLK_SOC_THERM, .present = true }, [tegra_clk_dtv] = { .dt_id = TEGRA124_CLK_DTV, .present = true }, - [tegra_clk_ndspeed] = { .dt_id = TEGRA124_CLK_NDSPEED, .present = true }, [tegra_clk_i2cslow] = { .dt_id = TEGRA124_CLK_I2CSLOW, .present = true }, [tegra_clk_dsib] = { .dt_id = TEGRA124_CLK_DSIB, .present = true }, [tegra_clk_tsec] = { .dt_id = TEGRA124_CLK_TSEC, .present = true }, @@ -952,7 +950,6 @@ static struct tegra_clk tegra124_clks[tegra_clk_max] __initdata = { [tegra_clk_clk_out_3_mux] = { .dt_id = TEGRA124_CLK_CLK_OUT_3_MUX, .present = true }, [tegra_clk_dsia_mux] = { .dt_id = TEGRA124_CLK_DSIA_MUX, .present = true }, [tegra_clk_dsib_mux] = { .dt_id = TEGRA124_CLK_DSIB_MUX, .present = true }, - [tegra_clk_uarte] = { .dt_id = TEGRA124_CLK_UARTE, .present = true }, }; static struct tegra_devclk devclks[] __initdata = { -- cgit v1.2.1 From 0cf4a7d6cf23715276fcd0f1cd1cabc6a9b46942 Mon Sep 17 00:00:00 2001 From: Jacob Pan Date: Tue, 15 Apr 2014 22:27:11 -0700 Subject: ahci: disable DEVSLP for Intel Valleyview On Intel Valleyview SoC, SATA device sleep is not reliable. When DEVSLP is attempted on certain SSDs, port_devslp write would fail and result in malfunction of AHCI controller. AHCI controller may be not shown in PCI enumeration after reset. Complete power source removal may be required to recover from this failure. So we blacklist this device and override host device reported capabilities such that device LPM will only attempt slumber but not DEVSLP. Signed-off-by: Jacob Pan Acked-by: Dan Williams Signed-off-by: Tejun Heo --- drivers/ata/ahci.c | 15 +++++++++++++++ drivers/ata/ahci.h | 1 + drivers/ata/libahci.c | 7 +++++++ 3 files changed, 23 insertions(+) (limited to 'drivers') diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c index 71e15b73513d..60707814a84b 100644 --- a/drivers/ata/ahci.c +++ b/drivers/ata/ahci.c @@ -1115,6 +1115,17 @@ static bool ahci_broken_online(struct pci_dev *pdev) return pdev->bus->number == (val >> 8) && pdev->devfn == (val & 0xff); } +static bool ahci_broken_devslp(struct pci_dev *pdev) +{ + /* device with broken DEVSLP but still showing SDS capability */ + static const struct pci_device_id ids[] = { + { PCI_VDEVICE(INTEL, 0x0f23)}, /* Valleyview SoC */ + {} + }; + + return pci_match_id(ids, pdev); +} + #ifdef CONFIG_ATA_ACPI static void ahci_gtf_filter_workaround(struct ata_host *host) { @@ -1364,6 +1375,10 @@ static int ahci_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) hpriv->mmio = pcim_iomap_table(pdev)[ahci_pci_bar]; + /* must set flag prior to save config in order to take effect */ + if (ahci_broken_devslp(pdev)) + hpriv->flags |= AHCI_HFLAG_NO_DEVSLP; + /* save initial config */ ahci_pci_save_initial_config(pdev, hpriv); diff --git a/drivers/ata/ahci.h b/drivers/ata/ahci.h index b5eb886da226..af63c75c2001 100644 --- a/drivers/ata/ahci.h +++ b/drivers/ata/ahci.h @@ -236,6 +236,7 @@ enum { port start (wait until error-handling stage) */ AHCI_HFLAG_MULTI_MSI = (1 << 16), /* multiple PCI MSIs */ + AHCI_HFLAG_NO_DEVSLP = (1 << 17), /* no device sleep */ /* ap->flags bits */ diff --git a/drivers/ata/libahci.c b/drivers/ata/libahci.c index 6bd4f660b4e1..b9861453fc81 100644 --- a/drivers/ata/libahci.c +++ b/drivers/ata/libahci.c @@ -452,6 +452,13 @@ void ahci_save_initial_config(struct device *dev, cap &= ~HOST_CAP_SNTF; } + if ((cap2 & HOST_CAP2_SDS) && (hpriv->flags & AHCI_HFLAG_NO_DEVSLP)) { + dev_info(dev, + "controller can't do DEVSLP, turning off\n"); + cap2 &= ~HOST_CAP2_SDS; + cap2 &= ~HOST_CAP2_SADM; + } + if (!(cap & HOST_CAP_FBS) && (hpriv->flags & AHCI_HFLAG_YES_FBS)) { dev_info(dev, "controller can do FBS, turning on CAP_FBS\n"); cap |= HOST_CAP_FBS; -- cgit v1.2.1 From 2284bb35503ce7b05fce8f0dc8e1cb2a3134ae4e Mon Sep 17 00:00:00 2001 From: Li Jun Date: Thu, 13 Mar 2014 15:22:50 +0800 Subject: usb: phy: fsm: update OTG HNP state transition According to:"On-The-Go and Embedded Host Supplement to the USB Revision 2.0 Specification July 27, 2012 Revision 2.0 version 1.1a" - add a_wait_vrise to a_wait_vfall - update condition from a_wait_vrise to a_wait_bcon Signed-off-by: Li Jun Signed-off-by: Felipe Balbi --- drivers/usb/phy/phy-fsm-usb.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/phy/phy-fsm-usb.c b/drivers/usb/phy/phy-fsm-usb.c index c47e5a6edde2..731b4a5d6639 100644 --- a/drivers/usb/phy/phy-fsm-usb.c +++ b/drivers/usb/phy/phy-fsm-usb.c @@ -303,10 +303,11 @@ int otg_statemachine(struct otg_fsm *fsm) otg_set_state(fsm, OTG_STATE_A_WAIT_VRISE); break; case OTG_STATE_A_WAIT_VRISE: - if (fsm->id || fsm->a_bus_drop || fsm->a_vbus_vld || - fsm->a_wait_vrise_tmout) { + if (fsm->a_vbus_vld) otg_set_state(fsm, OTG_STATE_A_WAIT_BCON); - } + else if (fsm->id || fsm->a_bus_drop || + fsm->a_wait_vrise_tmout) + otg_set_state(fsm, OTG_STATE_A_WAIT_VFALL); break; case OTG_STATE_A_WAIT_BCON: if (!fsm->a_vbus_vld) -- cgit v1.2.1 From 66668991c3515855e7a9881788feb7026f9f729f Mon Sep 17 00:00:00 2001 From: Peter Chen Date: Thu, 13 Mar 2014 15:22:51 +0800 Subject: usb: phy: fsm: change "|" to "||" for condition OTG_STATE_A_WAIT_BCON at statemachine We should be using logical "or" not bitwise "or". Signed-off-by: Peter Chen Signed-off-by: Felipe Balbi --- drivers/usb/phy/phy-fsm-usb.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/usb/phy/phy-fsm-usb.c b/drivers/usb/phy/phy-fsm-usb.c index 731b4a5d6639..d03fadd2629f 100644 --- a/drivers/usb/phy/phy-fsm-usb.c +++ b/drivers/usb/phy/phy-fsm-usb.c @@ -314,7 +314,7 @@ int otg_statemachine(struct otg_fsm *fsm) otg_set_state(fsm, OTG_STATE_A_VBUS_ERR); else if (fsm->b_conn) otg_set_state(fsm, OTG_STATE_A_HOST); - else if (fsm->id | fsm->a_bus_drop | fsm->a_wait_bcon_tmout) + else if (fsm->id || fsm->a_bus_drop || fsm->a_wait_bcon_tmout) otg_set_state(fsm, OTG_STATE_A_WAIT_VFALL); break; case OTG_STATE_A_HOST: -- cgit v1.2.1 From 82c0f5897a8708dbf7abe08e49efd9a4a8d8cd3a Mon Sep 17 00:00:00 2001 From: Rob Herring Date: Wed, 23 Apr 2014 17:57:40 -0500 Subject: of: selftest: add deferred probe interrupt test Signed-off-by: Rob Herring [grant.likely: fixed failure when root node specifies the interrupt parent] Signed-off-by: Grant Likely --- drivers/of/selftest.c | 32 ++++++++++++++++++++++++++ drivers/of/testcase-data/tests-interrupts.dtsi | 13 +++++++++++ 2 files changed, 45 insertions(+) (limited to 'drivers') diff --git a/drivers/of/selftest.c b/drivers/of/selftest.c index ae4450070503..fe70b86bcffb 100644 --- a/drivers/of/selftest.c +++ b/drivers/of/selftest.c @@ -10,6 +10,7 @@ #include #include #include +#include #include #include #include @@ -427,6 +428,36 @@ static void __init of_selftest_match_node(void) } } +static void __init of_selftest_platform_populate(void) +{ + int irq; + struct device_node *np; + struct platform_device *pdev; + + np = of_find_node_by_path("/testcase-data"); + of_platform_populate(np, of_default_bus_match_table, NULL, NULL); + + /* Test that a missing irq domain returns -EPROBE_DEFER */ + np = of_find_node_by_path("/testcase-data/testcase-device1"); + pdev = of_find_device_by_node(np); + if (!pdev) + selftest(0, "device 1 creation failed\n"); + irq = platform_get_irq(pdev, 0); + if (irq != -EPROBE_DEFER) + selftest(0, "device deferred probe failed - %d\n", irq); + + /* Test that a parsing failure does not return -EPROBE_DEFER */ + np = of_find_node_by_path("/testcase-data/testcase-device2"); + pdev = of_find_device_by_node(np); + if (!pdev) + selftest(0, "device 2 creation failed\n"); + irq = platform_get_irq(pdev, 0); + if (irq >= 0 || irq == -EPROBE_DEFER) + selftest(0, "device parsing error failed - %d\n", irq); + + selftest(1, "passed"); +} + static int __init of_selftest(void) { struct device_node *np; @@ -445,6 +476,7 @@ static int __init of_selftest(void) of_selftest_parse_interrupts(); of_selftest_parse_interrupts_extended(); of_selftest_match_node(); + of_selftest_platform_populate(); pr_info("end of selftest - %i passed, %i failed\n", selftest_results.passed, selftest_results.failed); return 0; diff --git a/drivers/of/testcase-data/tests-interrupts.dtsi b/drivers/of/testcase-data/tests-interrupts.dtsi index c843720bd3e5..da4695f60351 100644 --- a/drivers/of/testcase-data/tests-interrupts.dtsi +++ b/drivers/of/testcase-data/tests-interrupts.dtsi @@ -54,5 +54,18 @@ <&test_intmap1 1 2>; }; }; + + testcase-device1 { + compatible = "testcase-device"; + interrupt-parent = <&test_intc0>; + interrupts = <1>; + }; + + testcase-device2 { + compatible = "testcase-device"; + interrupt-parent = <&test_intc2>; + interrupts = <1>; /* invalid specifier - too short */ + }; }; + }; -- cgit v1.2.1 From d08b80373cbb76c9b485b60d49fd3ba82abdf77c Mon Sep 17 00:00:00 2001 From: Pawel Moll Date: Thu, 24 Apr 2014 17:19:30 +0100 Subject: power/reset: vexpress: Fix restart/power off operation The restart/power off implementation in the vexpress driver used to obtain the config function when necessary. This was wrong in two respects: 1. It required memory allocation with disabled interrupts (it worked, but lockdep - when enabled - reported warnings). 2. Used jiffies-based timeout, while jiffies are not running at this stage of system shutdown (therefore a config transaction error - if happened - would have never be reported). Fixed by pre-allocating the config function per device and using mdelay for timeout. Signed-off-by: Pawel Moll --- drivers/power/reset/vexpress-poweroff.c | 19 ++++++++++--------- 1 file changed, 10 insertions(+), 9 deletions(-) (limited to 'drivers') diff --git a/drivers/power/reset/vexpress-poweroff.c b/drivers/power/reset/vexpress-poweroff.c index 476aa495c110..b95cf71ed695 100644 --- a/drivers/power/reset/vexpress-poweroff.c +++ b/drivers/power/reset/vexpress-poweroff.c @@ -11,7 +11,7 @@ * Copyright (C) 2012 ARM Limited */ -#include +#include #include #include #include @@ -23,17 +23,12 @@ static void vexpress_reset_do(struct device *dev, const char *what) { int err = -ENOENT; - struct vexpress_config_func *func = - vexpress_config_func_get_by_dev(dev); + struct vexpress_config_func *func = dev_get_drvdata(dev); if (func) { - unsigned long timeout; - err = vexpress_config_write(func, 0, 0); - - timeout = jiffies + HZ; - while (time_before(jiffies, timeout)) - cpu_relax(); + if (!err) + mdelay(1000); } dev_emerg(dev, "Unable to %s (%d)\n", what, err); @@ -96,12 +91,18 @@ static int vexpress_reset_probe(struct platform_device *pdev) enum vexpress_reset_func func; const struct of_device_id *match = of_match_device(vexpress_reset_of_match, &pdev->dev); + struct vexpress_config_func *config_func; if (match) func = (enum vexpress_reset_func)match->data; else func = pdev->id_entry->driver_data; + config_func = vexpress_config_func_get_by_dev(&pdev->dev); + if (!config_func) + return -EINVAL; + dev_set_drvdata(&pdev->dev, config_func); + switch (func) { case FUNC_SHUTDOWN: vexpress_power_off_device = &pdev->dev; -- cgit v1.2.1 From a450a685791d12c0a477b75d630d6ae66acab9a7 Mon Sep 17 00:00:00 2001 From: Zi Shen Lim Date: Tue, 22 Apr 2014 20:04:42 -0700 Subject: smc91x: improve definition of debug macros Redefine some macros that were conditioned upon SMC_DEBUG level. By allowing compiler to verify parameters used by these macros unconditionally, we can flag compilation failures. Compiler will still optimize out the unused code path depending on SMC_DEBUG, so this is a net gain. Signed-off-by: Joe Perches Signed-off-by: Zi Shen Lim Signed-off-by: David S. Miller --- drivers/net/ethernet/smsc/smc91x.c | 23 ++++++++++++----------- 1 file changed, 12 insertions(+), 11 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/smsc/smc91x.c b/drivers/net/ethernet/smsc/smc91x.c index 597909ff2341..bcaa41af1e62 100644 --- a/drivers/net/ethernet/smsc/smc91x.c +++ b/drivers/net/ethernet/smsc/smc91x.c @@ -147,18 +147,19 @@ MODULE_ALIAS("platform:smc91x"); */ #define MII_DELAY 1 -#if SMC_DEBUG > 0 -#define DBG(n, dev, args...) \ - do { \ - if (SMC_DEBUG >= (n)) \ - netdev_dbg(dev, args); \ +#define DBG(n, dev, fmt, ...) \ + do { \ + if (SMC_DEBUG >= (n)) \ + netdev_dbg(dev, fmt, ##__VA_ARGS__); \ } while (0) -#define PRINTK(dev, args...) netdev_info(dev, args) -#else -#define DBG(n, dev, args...) do { } while (0) -#define PRINTK(dev, args...) netdev_dbg(dev, args) -#endif +#define PRINTK(dev, fmt, ...) \ + do { \ + if (SMC_DEBUG > 0) \ + netdev_info(dev, fmt, ##__VA_ARGS__); \ + else \ + netdev_dbg(dev, fmt, ##__VA_ARGS__); \ + } while (0) #if SMC_DEBUG > 3 static void PRINT_PKT(u_char *buf, int length) @@ -191,7 +192,7 @@ static void PRINT_PKT(u_char *buf, int length) pr_cont("\n"); } #else -#define PRINT_PKT(x...) do { } while (0) +static inline void PRINT_PKT(u_char *buf, int length) { } #endif -- cgit v1.2.1 From 8ea2b17c99b926e2229696eed7f49ac2f73f4619 Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Wed, 23 Apr 2014 10:40:12 +0200 Subject: net: cadence: Fix architecture dependencies I was told that the Cadence macb driver is also useful on Microblaze. Signed-off-by: Jean Delvare Cc: Nicolas Ferre Cc: David S. Miller Cc: Michal Simek Cc: Mark Brown Acked-by: Nicolas Ferre Signed-off-by: David S. Miller --- drivers/net/ethernet/cadence/Kconfig | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/cadence/Kconfig b/drivers/net/ethernet/cadence/Kconfig index 7e49c43b7af3..9e089d24466e 100644 --- a/drivers/net/ethernet/cadence/Kconfig +++ b/drivers/net/ethernet/cadence/Kconfig @@ -4,7 +4,7 @@ config NET_CADENCE bool "Cadence devices" - depends on HAS_IOMEM && (ARM || AVR32 || COMPILE_TEST) + depends on HAS_IOMEM && (ARM || AVR32 || MICROBLAZE || COMPILE_TEST) default y ---help--- If you have a network (Ethernet) card belonging to this class, say Y. @@ -30,7 +30,7 @@ config ARM_AT91_ETHER config MACB tristate "Cadence MACB/GEM support" - depends on HAS_DMA && (PLATFORM_AT32AP || ARCH_AT91 || ARCH_PICOXCELL || ARCH_ZYNQ || COMPILE_TEST) + depends on HAS_DMA && (PLATFORM_AT32AP || ARCH_AT91 || ARCH_PICOXCELL || ARCH_ZYNQ || MICROBLAZE || COMPILE_TEST) select PHYLIB ---help--- The Cadence MACB ethernet interface is found on many Atmel AT32 and -- cgit v1.2.1 From ed2da03c6907800871234f5cae42db7d80de8dfc Mon Sep 17 00:00:00 2001 From: Jiri Pirko Date: Wed, 23 Apr 2014 14:17:55 +0200 Subject: team: forbid incorrect fall-through in notifier There are two breaks missing there. The result is that userspace receives multiple messages which might be confusing. Introduced-by: 3d249d4c "net: introduce ethernet teaming device" Signed-off-by: Jiri Pirko Signed-off-by: David S. Miller --- drivers/net/team/team.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'drivers') diff --git a/drivers/net/team/team.c b/drivers/net/team/team.c index 33008c1d1d67..767fe61b5ac9 100644 --- a/drivers/net/team/team.c +++ b/drivers/net/team/team.c @@ -2834,8 +2834,10 @@ static int team_device_event(struct notifier_block *unused, case NETDEV_UP: if (netif_carrier_ok(dev)) team_port_change_check(port, true); + break; case NETDEV_DOWN: team_port_change_check(port, false); + break; case NETDEV_CHANGE: if (netif_running(port->dev)) team_port_change_check(port, -- cgit v1.2.1 From f66abe92ce498672ac44d550f51a526597c731c4 Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Thu, 24 Apr 2014 19:27:49 +0200 Subject: ACPI / notify: Do not block unknown type notifications in root handler MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Commit 1a699476e258 "ACPI / hotplug / PCI: Hotplug notifications from acpi_bus_notify()" changed the root notify handler, acpi_bus_notify(), to block unknown type norifications, but it overlooked the fact that they might be propagated to drivers via the ->notify() callback. Fix the problem by allowing drivers to receive unknown type notifications via ->notify() as before. Fixes: 1a699476e258 (ACPI / hotplug / PCI: Hotplug notifications from acpi_bus_notify()) Reported-and-tested-by: Mantas Mikulėnas Reported-and-tested-by: Sitsofe Wheeler Signed-off-by: Rafael J. Wysocki --- drivers/acpi/bus.c | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/acpi/bus.c b/drivers/acpi/bus.c index e7e5844c87d0..cf925c4f36b7 100644 --- a/drivers/acpi/bus.c +++ b/drivers/acpi/bus.c @@ -380,9 +380,8 @@ static void acpi_bus_notify(acpi_handle handle, u32 type, void *data) break; default: - acpi_handle_warn(handle, "Unsupported event type 0x%x\n", type); - ost_code = ACPI_OST_SC_UNRECOGNIZED_NOTIFY; - goto err; + acpi_handle_debug(handle, "Unknown event type 0x%x\n", type); + break; } adev = acpi_bus_get_acpi_device(handle); -- cgit v1.2.1 From 2c97e9e2633f3a4a3a301e5071fb0fe0d0d7543b Mon Sep 17 00:00:00 2001 From: Sony Chacko Date: Wed, 23 Apr 2014 09:59:55 -0400 Subject: qlcnic: Reset firmware API lock at driver load time Some firmware versions fails to reset the lock during initialization. Force reset firmware API lock during driver probe to ensure lock availability. Signed-off-by: Sony Chacko Signed-off-by: Shahed Shaikh Signed-off-by: David S. Miller --- drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c | 9 +++++++++ 1 file changed, 9 insertions(+) (limited to 'drivers') diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c index dbf75393f758..0bc914859e38 100644 --- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c +++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c @@ -2374,6 +2374,14 @@ void qlcnic_set_drv_version(struct qlcnic_adapter *adapter) qlcnic_fw_cmd_set_drv_version(adapter, fw_cmd); } +/* Reset firmware API lock */ +static void qlcnic_reset_api_lock(struct qlcnic_adapter *adapter) +{ + qlcnic_api_lock(adapter); + qlcnic_api_unlock(adapter); +} + + static int qlcnic_probe(struct pci_dev *pdev, const struct pci_device_id *ent) { @@ -2476,6 +2484,7 @@ qlcnic_probe(struct pci_dev *pdev, const struct pci_device_id *ent) if (qlcnic_82xx_check(adapter)) { qlcnic_check_vf(adapter, ent); adapter->portnum = adapter->ahw->pci_func; + qlcnic_reset_api_lock(adapter); err = qlcnic_start_firmware(adapter); if (err) { dev_err(&pdev->dev, "Loading fw failed.Please Reboot\n" -- cgit v1.2.1 From ab0648e8b6426a009a0e929b137037481b1c2e1e Mon Sep 17 00:00:00 2001 From: Rajesh Borundia Date: Wed, 23 Apr 2014 09:59:56 -0400 Subject: qlcnic: Fix memory leak. o In case QLC_83XX_MBX_CMD_NO_WAIT command type the calling function does not free the memory as it does not wait for response. So free it when get a response from adapter after sending the command. Signed-off-by: Rajesh Borundia Signed-off-by: Shahed Shaikh Signed-off-by: David S. Miller --- drivers/net/ethernet/qlogic/qlcnic/qlcnic_sriov_common.c | 9 ++++++++- 1 file changed, 8 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_sriov_common.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_sriov_common.c index 0638c1810d54..6afe9c1f5ab9 100644 --- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_sriov_common.c +++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_sriov_common.c @@ -1370,7 +1370,7 @@ static int qlcnic_sriov_issue_cmd(struct qlcnic_adapter *adapter, rsp = qlcnic_sriov_alloc_bc_trans(&trans); if (rsp) - return rsp; + goto free_cmd; rsp = qlcnic_sriov_prepare_bc_hdr(trans, cmd, seq, QLC_BC_COMMAND); if (rsp) @@ -1425,6 +1425,13 @@ err_out: cleanup_transaction: qlcnic_sriov_cleanup_transaction(trans); + +free_cmd: + if (cmd->type == QLC_83XX_MBX_CMD_NO_WAIT) { + qlcnic_free_mbx_args(cmd); + kfree(cmd); + } + return rsp; } -- cgit v1.2.1 From 98a46d46d1bc983125b6ff9a0e831050a7011713 Mon Sep 17 00:00:00 2001 From: Claudiu Manoil Date: Wed, 23 Apr 2014 16:38:47 +0300 Subject: gianfar: Check if phydev present on ethtool -A This fixes a seg fault on 'ethtool -A' entry if the interface is down. Obviously we need to have the phy device initialized / "connected" (see of_phy_connect()) to be able to advertise pause frame capabilities. Fixes: 23402bddf9e56eecb27bbd1e5467b3b79b3dbe58 Signed-off-by: Claudiu Manoil Signed-off-by: David S. Miller --- drivers/net/ethernet/freescale/gianfar_ethtool.c | 3 +++ 1 file changed, 3 insertions(+) (limited to 'drivers') diff --git a/drivers/net/ethernet/freescale/gianfar_ethtool.c b/drivers/net/ethernet/freescale/gianfar_ethtool.c index 891dbee6e6c1..76d70708f864 100644 --- a/drivers/net/ethernet/freescale/gianfar_ethtool.c +++ b/drivers/net/ethernet/freescale/gianfar_ethtool.c @@ -533,6 +533,9 @@ static int gfar_spauseparam(struct net_device *dev, struct gfar __iomem *regs = priv->gfargrp[0].regs; u32 oldadv, newadv; + if (!phydev) + return -ENODEV; + if (!(phydev->supported & SUPPORTED_Pause) || (!(phydev->supported & SUPPORTED_Asym_Pause) && (epause->rx_pause != epause->tx_pause))) -- cgit v1.2.1 From 90f62cf30a78721641e08737bda787552428061e Mon Sep 17 00:00:00 2001 From: "Eric W. Biederman" Date: Wed, 23 Apr 2014 14:29:27 -0700 Subject: net: Use netlink_ns_capable to verify the permisions of netlink messages It is possible by passing a netlink socket to a more privileged executable and then to fool that executable into writing to the socket data that happens to be valid netlink message to do something that privileged executable did not intend to do. To keep this from happening replace bare capable and ns_capable calls with netlink_capable, netlink_net_calls and netlink_ns_capable calls. Which act the same as the previous calls except they verify that the opener of the socket had the desired permissions as well. Reported-by: Andy Lutomirski Signed-off-by: "Eric W. Biederman" Signed-off-by: David S. Miller --- drivers/connector/cn_proc.c | 2 +- drivers/scsi/scsi_netlink.c | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/connector/cn_proc.c b/drivers/connector/cn_proc.c index 148d707a1d43..ccdd4c7e748b 100644 --- a/drivers/connector/cn_proc.c +++ b/drivers/connector/cn_proc.c @@ -369,7 +369,7 @@ static void cn_proc_mcast_ctl(struct cn_msg *msg, return; /* Can only change if privileged. */ - if (!capable(CAP_NET_ADMIN)) { + if (!__netlink_ns_capable(nsp, &init_user_ns, CAP_NET_ADMIN)) { err = EPERM; goto out; } diff --git a/drivers/scsi/scsi_netlink.c b/drivers/scsi/scsi_netlink.c index fe30ea94ffe6..109802f776ed 100644 --- a/drivers/scsi/scsi_netlink.c +++ b/drivers/scsi/scsi_netlink.c @@ -77,7 +77,7 @@ scsi_nl_rcv_msg(struct sk_buff *skb) goto next_msg; } - if (!capable(CAP_SYS_ADMIN)) { + if (!netlink_capable(skb, CAP_SYS_ADMIN)) { err = -EPERM; goto next_msg; } -- cgit v1.2.1 From cd84f009e98b3aa6109503f80f66ccf3e19e8fa9 Mon Sep 17 00:00:00 2001 From: Peter Chen Date: Thu, 24 Apr 2014 08:15:27 +0800 Subject: usb: chipidea: coordinate usb phy initialization for different phy type For internal PHY (like UTMI), the phy clock may from internal pll, it is on/off on the fly, the access PORTSC.PTS will hang without phy clock. So, the usb_phy_init which will open phy clock needs to be called before hw_phymode_configure. See: http://marc.info/?l=linux-arm-kernel&m=139350618732108&w=2 For external PHY (like ulpi), it needs to configure portsc.pts before visit viewport, or the viewport can't be visited. so phy_phymode_configure needs to be called before usb_phy_init. See: cd0b42c2a6d2a74244f0053f8960f5dad5842278 It may not the best solution, but it can work for all situations. Cc: Sascha Hauer Cc: Chris Ruehl Cc: shc_work@mail.ru Cc: denis@eukrea.com Cc: festevam@gmail.com Cc: stable # 3.14 Signed-off-by: Peter Chen Signed-off-by: Greg Kroah-Hartman --- drivers/usb/chipidea/core.c | 37 ++++++++++++++++++++++++++++++++++--- 1 file changed, 34 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/chipidea/core.c b/drivers/usb/chipidea/core.c index ca6831c5b763..1cd5d0ba587c 100644 --- a/drivers/usb/chipidea/core.c +++ b/drivers/usb/chipidea/core.c @@ -276,6 +276,39 @@ static void hw_phymode_configure(struct ci_hdrc *ci) } } +/** + * ci_usb_phy_init: initialize phy according to different phy type + * @ci: the controller + * + * This function returns an error code if usb_phy_init has failed + */ +static int ci_usb_phy_init(struct ci_hdrc *ci) +{ + int ret; + + switch (ci->platdata->phy_mode) { + case USBPHY_INTERFACE_MODE_UTMI: + case USBPHY_INTERFACE_MODE_UTMIW: + case USBPHY_INTERFACE_MODE_HSIC: + ret = usb_phy_init(ci->transceiver); + if (ret) + return ret; + hw_phymode_configure(ci); + break; + case USBPHY_INTERFACE_MODE_ULPI: + case USBPHY_INTERFACE_MODE_SERIAL: + hw_phymode_configure(ci); + ret = usb_phy_init(ci->transceiver); + if (ret) + return ret; + break; + default: + ret = usb_phy_init(ci->transceiver); + } + + return ret; +} + /** * hw_device_reset: resets chip (execute without interruption) * @ci: the controller @@ -543,8 +576,6 @@ static int ci_hdrc_probe(struct platform_device *pdev) return -ENODEV; } - hw_phymode_configure(ci); - if (ci->platdata->phy) ci->transceiver = ci->platdata->phy; else @@ -564,7 +595,7 @@ static int ci_hdrc_probe(struct platform_device *pdev) return -EPROBE_DEFER; } - ret = usb_phy_init(ci->transceiver); + ret = ci_usb_phy_init(ci); if (ret) { dev_err(dev, "unable to init phy: %d\n", ret); return ret; -- cgit v1.2.1 From c996b9379180ee578b9ea208bb4f197201bbb023 Mon Sep 17 00:00:00 2001 From: Thomas Pugliese Date: Wed, 23 Apr 2014 14:42:47 -0500 Subject: uwb: don't call spin_unlock_irq in a USB completion handler This patch converts the use of spin_lock_irq/spin_unlock_irq to spin_lock_irqsave/spin_unlock_irqrestore in uwb_rc_set_drp_cmd_done which is called from a USB completion handler. There are also whitespace cleanups to make checkpatch.pl happy. Signed-off-by: Thomas Pugliese Signed-off-by: Greg Kroah-Hartman --- drivers/uwb/drp.c | 9 +++++---- 1 file changed, 5 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/uwb/drp.c b/drivers/uwb/drp.c index 1a2fd9795367..468c89fb6a16 100644 --- a/drivers/uwb/drp.c +++ b/drivers/uwb/drp.c @@ -59,6 +59,7 @@ static void uwb_rc_set_drp_cmd_done(struct uwb_rc *rc, void *arg, struct uwb_rceb *reply, ssize_t reply_size) { struct uwb_rc_evt_set_drp_ie *r = (struct uwb_rc_evt_set_drp_ie *)reply; + unsigned long flags; if (r != NULL) { if (r->bResultCode != UWB_RC_RES_SUCCESS) @@ -67,14 +68,14 @@ static void uwb_rc_set_drp_cmd_done(struct uwb_rc *rc, void *arg, } else dev_err(&rc->uwb_dev.dev, "SET-DRP-IE: timeout\n"); - spin_lock_irq(&rc->rsvs_lock); + spin_lock_irqsave(&rc->rsvs_lock, flags); if (rc->set_drp_ie_pending > 1) { rc->set_drp_ie_pending = 0; - uwb_rsv_queue_update(rc); + uwb_rsv_queue_update(rc); } else { - rc->set_drp_ie_pending = 0; + rc->set_drp_ie_pending = 0; } - spin_unlock_irq(&rc->rsvs_lock); + spin_unlock_irqrestore(&rc->rsvs_lock, flags); } /** -- cgit v1.2.1 From 7584f2ebc18b6355f21be5fb2f75afbf3f781ce5 Mon Sep 17 00:00:00 2001 From: Thomas Pugliese Date: Wed, 23 Apr 2014 14:32:27 -0500 Subject: usb: wusbcore: convert nested lock to use spin_lock instead of spin_lock_irq Nesting a spin_lock_irq/unlock_irq inside a lock that has already disabled interrupts will enable interrupts before we are ready when spin_unlock_irq is called. This patch converts the inner lock to use spin_lock and spin_unlock instead. Signed-off-by: Thomas Pugliese Signed-off-by: Greg Kroah-Hartman --- drivers/usb/wusbcore/wa-xfer.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/wusbcore/wa-xfer.c b/drivers/usb/wusbcore/wa-xfer.c index c8e2a47d62a7..3e2e4ed20157 100644 --- a/drivers/usb/wusbcore/wa-xfer.c +++ b/drivers/usb/wusbcore/wa-xfer.c @@ -2390,10 +2390,10 @@ error_complete: done) { dev_info(dev, "Control EP stall. Queue delayed work.\n"); - spin_lock_irq(&wa->xfer_list_lock); + spin_lock(&wa->xfer_list_lock); /* move xfer from xfer_list to xfer_errored_list. */ list_move_tail(&xfer->list_node, &wa->xfer_errored_list); - spin_unlock_irq(&wa->xfer_list_lock); + spin_unlock(&wa->xfer_list_lock); spin_unlock_irqrestore(&xfer->lock, flags); queue_work(wusbd, &wa->xfer_error_work); } else { -- cgit v1.2.1 From bd130adacaf8cea179f9a700fb694f5be3b05bf0 Mon Sep 17 00:00:00 2001 From: Thomas Pugliese Date: Wed, 23 Apr 2014 14:28:10 -0500 Subject: usb: wusbcore: fix panic in wusbhc_chid_set If no valid CHID value has previously been set on an HWA, writing a value of all zeros will cause a kernel panic in uwb_radio_stop because wusbhc->uwb_rc has not been set. This patch skips the call to uwb_radio_stop if wusbhc->uwb_rc has not been initialized. Signed-off-by: Thomas Pugliese Signed-off-by: Greg Kroah-Hartman --- drivers/usb/wusbcore/mmc.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/usb/wusbcore/mmc.c b/drivers/usb/wusbcore/mmc.c index 44741267c917..3f485df96226 100644 --- a/drivers/usb/wusbcore/mmc.c +++ b/drivers/usb/wusbcore/mmc.c @@ -301,7 +301,7 @@ int wusbhc_chid_set(struct wusbhc *wusbhc, const struct wusb_ckhdid *chid) if (chid) result = uwb_radio_start(&wusbhc->pal); - else + else if (wusbhc->uwb_rc) uwb_radio_stop(&wusbhc->pal); return result; -- cgit v1.2.1 From 10164c2ad6d2c16809f6c09e278f946e47801b3a Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Wed, 23 Apr 2014 11:32:19 +0200 Subject: USB: serial: fix sysfs-attribute removal deadlock Fix driver new_id sysfs-attribute removal deadlock by making sure to not hold any locks that the attribute operations grab when removing the attribute. Specifically, usb_serial_deregister holds the table mutex when deregistering the driver, which includes removing the new_id attribute. This can lead to a deadlock as writing to new_id increments the attribute's active count before trying to grab the same mutex in usb_serial_probe. The deadlock can easily be triggered by inserting a sleep in usb_serial_deregister and writing the id of an unbound device to new_id during module unload. As the table mutex (in this case) is used to prevent subdriver unload during probe, it should be sufficient to only hold the lock while manipulating the usb-serial driver list during deregister. A racing probe will then either fail to find a matching subdriver or fail to get the corresponding module reference. Since v3.15-rc1 this also triggers the following lockdep warning: ====================================================== [ INFO: possible circular locking dependency detected ] 3.15.0-rc2 #123 Tainted: G W ------------------------------------------------------- modprobe/190 is trying to acquire lock: (s_active#4){++++.+}, at: [] kernfs_remove_by_name_ns+0x4c/0x94 but task is already holding lock: (table_lock){+.+.+.}, at: [] usb_serial_deregister+0x3c/0x78 [usbserial] which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #1 (table_lock){+.+.+.}: [] __lock_acquire+0x1694/0x1ce4 [] lock_acquire+0xb4/0x154 [] _raw_spin_lock+0x4c/0x5c [] usb_store_new_id+0x14c/0x1ac [] new_id_store+0x68/0x70 [usbserial] [] drv_attr_store+0x30/0x3c [] sysfs_kf_write+0x5c/0x60 [] kernfs_fop_write+0xd4/0x194 [] vfs_write+0xbc/0x198 [] SyS_write+0x4c/0xa0 [] ret_fast_syscall+0x0/0x48 -> #0 (s_active#4){++++.+}: [] print_circular_bug+0x68/0x2f8 [] __lock_acquire+0x1928/0x1ce4 [] lock_acquire+0xb4/0x154 [] __kernfs_remove+0x254/0x310 [] kernfs_remove_by_name_ns+0x4c/0x94 [] remove_files.isra.1+0x48/0x84 [] sysfs_remove_group+0x58/0xac [] sysfs_remove_groups+0x34/0x44 [] driver_remove_groups+0x1c/0x20 [] bus_remove_driver+0x3c/0xe4 [] driver_unregister+0x38/0x58 [] usb_serial_bus_deregister+0x84/0x88 [usbserial] [] usb_serial_deregister+0x6c/0x78 [usbserial] [] usb_serial_deregister_drivers+0x2c/0x4c [usbserial] [] usb_serial_module_exit+0x14/0x1c [sierra] [] SyS_delete_module+0x184/0x210 [] ret_fast_syscall+0x0/0x48 other info that might help us debug this: Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(table_lock); lock(s_active#4); lock(table_lock); lock(s_active#4); *** DEADLOCK *** 1 lock held by modprobe/190: #0: (table_lock){+.+.+.}, at: [] usb_serial_deregister+0x3c/0x78 [usbserial] stack backtrace: CPU: 0 PID: 190 Comm: modprobe Tainted: G W 3.15.0-rc2 #123 [] (unwind_backtrace) from [] (show_stack+0x20/0x24) [] (show_stack) from [] (dump_stack+0x24/0x28) [] (dump_stack) from [] (print_circular_bug+0x2ec/0x2f8) [] (print_circular_bug) from [] (__lock_acquire+0x1928/0x1ce4) [] (__lock_acquire) from [] (lock_acquire+0xb4/0x154) [] (lock_acquire) from [] (__kernfs_remove+0x254/0x310) [] (__kernfs_remove) from [] (kernfs_remove_by_name_ns+0x4c/0x94) [] (kernfs_remove_by_name_ns) from [] (remove_files.isra.1+0x48/0x84) [] (remove_files.isra.1) from [] (sysfs_remove_group+0x58/0xac) [] (sysfs_remove_group) from [] (sysfs_remove_groups+0x34/0x44) [] (sysfs_remove_groups) from [] (driver_remove_groups+0x1c/0x20) [] (driver_remove_groups) from [] (bus_remove_driver+0x3c/0xe4) [] (bus_remove_driver) from [] (driver_unregister+0x38/0x58) [] (driver_unregister) from [] (usb_serial_bus_deregister+0x84/0x88 [usbserial]) [] (usb_serial_bus_deregister [usbserial]) from [] (usb_serial_deregister+0x6c/0x78 [usbserial]) [] (usb_serial_deregister [usbserial]) from [] (usb_serial_deregister_drivers+0x2c/0x4c [usbserial]) [] (usb_serial_deregister_drivers [usbserial]) from [] (usb_serial_module_exit+0x14/0x1c [sierra]) [] (usb_serial_module_exit [sierra]) from [] (SyS_delete_module+0x184/0x210) [] (SyS_delete_module) from [] (ret_fast_syscall+0x0/0x48) Signed-off-by: Johan Hovold Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/usb-serial.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/usb/serial/usb-serial.c b/drivers/usb/serial/usb-serial.c index 81fc0dfcfdcf..6d40d56378d7 100644 --- a/drivers/usb/serial/usb-serial.c +++ b/drivers/usb/serial/usb-serial.c @@ -1347,10 +1347,12 @@ static int usb_serial_register(struct usb_serial_driver *driver) static void usb_serial_deregister(struct usb_serial_driver *device) { pr_info("USB Serial deregistering driver %s\n", device->description); + mutex_lock(&table_lock); list_del(&device->driver_list); - usb_serial_bus_deregister(device); mutex_unlock(&table_lock); + + usb_serial_bus_deregister(device); } /** -- cgit v1.2.1 From d1481832f1dbb9d10fab27269631a130fa082f03 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Sat, 19 Apr 2014 08:51:41 +0530 Subject: phy: exynos: fix building as a module The top-level phy-samsung-usb2 driver may be configured as a loadable module, which currently causes link errors because of the dependency on the exynos{5250,4x12,4210}_usb2_phy_config symbol. Solving this could be achieved by exporting these symbols, but as the SoC-specific parts of the driver are not currently built as modules, it seems better to just link everything into one module and avoid the need for the export. Signed-off-by: Arnd Bergmann Acked-by: Kamil Debski Signed-off-by: Kishon Vijay Abraham I Signed-off-by: Greg Kroah-Hartman --- drivers/phy/Makefile | 9 +++++---- 1 file changed, 5 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/phy/Makefile b/drivers/phy/Makefile index 2faf78edc864..7728518572a4 100644 --- a/drivers/phy/Makefile +++ b/drivers/phy/Makefile @@ -13,8 +13,9 @@ obj-$(CONFIG_TI_PIPE3) += phy-ti-pipe3.o obj-$(CONFIG_TWL4030_USB) += phy-twl4030-usb.o obj-$(CONFIG_PHY_EXYNOS5250_SATA) += phy-exynos5250-sata.o obj-$(CONFIG_PHY_SUN4I_USB) += phy-sun4i-usb.o -obj-$(CONFIG_PHY_SAMSUNG_USB2) += phy-samsung-usb2.o -obj-$(CONFIG_PHY_EXYNOS4210_USB2) += phy-exynos4210-usb2.o -obj-$(CONFIG_PHY_EXYNOS4X12_USB2) += phy-exynos4x12-usb2.o -obj-$(CONFIG_PHY_EXYNOS5250_USB2) += phy-exynos5250-usb2.o +obj-$(CONFIG_PHY_SAMSUNG_USB2) += phy-exynos-usb2.o +phy-exynos-usb2-y += phy-samsung-usb2.o +phy-exynos-usb2-$(CONFIG_PHY_EXYNOS4210_USB2) += phy-exynos4210-usb2.o +phy-exynos-usb2-$(CONFIG_PHY_EXYNOS4X12_USB2) += phy-exynos4x12-usb2.o +phy-exynos-usb2-$(CONFIG_PHY_EXYNOS5250_USB2) += phy-exynos5250-usb2.o obj-$(CONFIG_PHY_XGENE) += phy-xgene.o -- cgit v1.2.1 From 907aa3aa8dbb5437696776d40caeea245c8ba3bd Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Sat, 19 Apr 2014 08:51:42 +0530 Subject: phy: restore OMAP_CONTROL_PHY dependencies When OMAP_CONTROL_USB was renamed to OMAP_CONTROL_PHY (commit 14da699b), its dependencies were lost in the process. Nothing in the commit message indicates that this removal was intentional, so I think it was by accident and the dependencies should be restored. Signed-off-by: Jean Delvare Acked-by: Roger Quadros Cc: Felipe Balbi Signed-off-by: Kishon Vijay Abraham I Signed-off-by: Greg Kroah-Hartman --- drivers/phy/Kconfig | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/phy/Kconfig b/drivers/phy/Kconfig index 3bb05f17b9b4..4906c27fa3bd 100644 --- a/drivers/phy/Kconfig +++ b/drivers/phy/Kconfig @@ -33,6 +33,7 @@ config PHY_MVEBU_SATA config OMAP_CONTROL_PHY tristate "OMAP CONTROL PHY Driver" + depends on ARCH_OMAP2PLUS || COMPILE_TEST help Enable this to add support for the PHY part present in the control module. This driver has API to power on the USB2 PHY and to write to -- cgit v1.2.1 From 743bb387a1edbf1ebbba6cf77c1af3e488886c39 Mon Sep 17 00:00:00 2001 From: Sergei Shtylyov Date: Sat, 19 Apr 2014 08:51:43 +0530 Subject: phy: fix kernel oops in phy_lookup() The kernel oopses in phy_lookup() due to 'phy->init_data' being NULL if we register PHYs from a device tree probing driver and then call phy_get() on a device that has no representation in the device tree (e.g. a PCI device). Checking the pointer before dereferening it and skipping an interation if it's NULL prevents this kernel oops. Signed-off-by: Sergei Shtylyov Signed-off-by: Kishon Vijay Abraham I Signed-off-by: Greg Kroah-Hartman --- drivers/phy/phy-core.c | 3 +++ 1 file changed, 3 insertions(+) (limited to 'drivers') diff --git a/drivers/phy/phy-core.c b/drivers/phy/phy-core.c index 623b71c54b3e..c64a2f3b2d62 100644 --- a/drivers/phy/phy-core.c +++ b/drivers/phy/phy-core.c @@ -64,6 +64,9 @@ static struct phy *phy_lookup(struct device *device, const char *port) class_dev_iter_init(&iter, phy_class, NULL, NULL); while ((dev = class_dev_iter_next(&iter))) { phy = to_phy(dev); + + if (!phy->init_data) + continue; count = phy->init_data->num_consumers; consumers = phy->init_data->consumers; while (count--) { -- cgit v1.2.1 From 129eef2184218f4603f406945552ff4e58b05cf1 Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Fri, 11 Apr 2014 08:13:10 +0000 Subject: can: c_can_pci: Set the type of the IP core All type checks in c_can.c are != BOSCH_D_CAN so nobody noticed so far that the pci code does not update the type information. Signed-off-by: Thomas Gleixner Tested-by: Alexander Stein Signed-off-by: Marc Kleine-Budde --- drivers/net/can/c_can/c_can_pci.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'drivers') diff --git a/drivers/net/can/c_can/c_can_pci.c b/drivers/net/can/c_can/c_can_pci.c index bce0be54c2f5..1b7ff400711a 100644 --- a/drivers/net/can/c_can/c_can_pci.c +++ b/drivers/net/can/c_can/c_can_pci.c @@ -132,6 +132,8 @@ static int c_can_pci_probe(struct pci_dev *pdev, goto out_free_c_can; } + priv->type = c_can_pci_data->type; + /* Configure access to registers */ switch (c_can_pci_data->reg_align) { case C_CAN_REG_ALIGN_32: -- cgit v1.2.1 From bed11db3d4095e5f818f5e8bf7f43ef2beb36d4e Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Fri, 11 Apr 2014 08:13:10 +0000 Subject: can: c_can: Fix startup logic c_can_start() enables interrupts way too early. The first enabling happens when setting the control mode in c_can_chip_config() and then again at the end of the function. But that happens before napi_enable() and that means that an interrupt which comes in will disable interrupts again and call napi_schedule, which ignores the request and the later napi_enable() is not making thinks work either. So the interface is up with all device interrupts disabled. Move the device interrupt after napi_enable() and add it to the other callsites of c_can_start() in c_can_set_mode() and c_can_power_up() Signed-off-by: Thomas Gleixner Tested-by: Alexander Stein Signed-off-by: Marc Kleine-Budde --- drivers/net/can/c_can/c_can.c | 35 +++++++++++++++++------------------ 1 file changed, 17 insertions(+), 18 deletions(-) (limited to 'drivers') diff --git a/drivers/net/can/c_can/c_can.c b/drivers/net/can/c_can/c_can.c index a5c8dcfa8357..b1629a47c03b 100644 --- a/drivers/net/can/c_can/c_can.c +++ b/drivers/net/can/c_can/c_can.c @@ -612,30 +612,22 @@ static int c_can_chip_config(struct net_device *dev) struct c_can_priv *priv = netdev_priv(dev); /* enable automatic retransmission */ - priv->write_reg(priv, C_CAN_CTRL_REG, - CONTROL_ENABLE_AR); + priv->write_reg(priv, C_CAN_CTRL_REG, CONTROL_ENABLE_AR); if ((priv->can.ctrlmode & CAN_CTRLMODE_LISTENONLY) && (priv->can.ctrlmode & CAN_CTRLMODE_LOOPBACK)) { /* loopback + silent mode : useful for hot self-test */ - priv->write_reg(priv, C_CAN_CTRL_REG, CONTROL_EIE | - CONTROL_SIE | CONTROL_IE | CONTROL_TEST); - priv->write_reg(priv, C_CAN_TEST_REG, - TEST_LBACK | TEST_SILENT); + priv->write_reg(priv, C_CAN_CTRL_REG, CONTROL_TEST); + priv->write_reg(priv, C_CAN_TEST_REG, TEST_LBACK | TEST_SILENT); } else if (priv->can.ctrlmode & CAN_CTRLMODE_LOOPBACK) { /* loopback mode : useful for self-test function */ - priv->write_reg(priv, C_CAN_CTRL_REG, CONTROL_EIE | - CONTROL_SIE | CONTROL_IE | CONTROL_TEST); + priv->write_reg(priv, C_CAN_CTRL_REG, CONTROL_TEST); priv->write_reg(priv, C_CAN_TEST_REG, TEST_LBACK); } else if (priv->can.ctrlmode & CAN_CTRLMODE_LISTENONLY) { /* silent mode : bus-monitoring mode */ - priv->write_reg(priv, C_CAN_CTRL_REG, CONTROL_EIE | - CONTROL_SIE | CONTROL_IE | CONTROL_TEST); + priv->write_reg(priv, C_CAN_CTRL_REG, CONTROL_TEST); priv->write_reg(priv, C_CAN_TEST_REG, TEST_SILENT); - } else - /* normal mode*/ - priv->write_reg(priv, C_CAN_CTRL_REG, - CONTROL_EIE | CONTROL_SIE | CONTROL_IE); + } /* configure message objects */ c_can_configure_msg_objects(dev); @@ -662,9 +654,6 @@ static int c_can_start(struct net_device *dev) /* reset tx helper pointers */ priv->tx_next = priv->tx_echo = 0; - /* enable status change, error and module interrupts */ - c_can_enable_all_interrupts(priv, ENABLE_ALL_INTERRUPTS); - return 0; } @@ -681,6 +670,7 @@ static void c_can_stop(struct net_device *dev) static int c_can_set_mode(struct net_device *dev, enum can_mode mode) { + struct c_can_priv *priv = netdev_priv(dev); int err; switch (mode) { @@ -689,6 +679,8 @@ static int c_can_set_mode(struct net_device *dev, enum can_mode mode) if (err) return err; netif_wake_queue(dev); + /* enable status change, error and module interrupts */ + c_can_enable_all_interrupts(priv, ENABLE_ALL_INTERRUPTS); break; default: return -EOPNOTSUPP; @@ -1184,6 +1176,8 @@ static int c_can_open(struct net_device *dev) can_led_event(dev, CAN_LED_EVENT_OPEN); napi_enable(&priv->napi); + /* enable status change, error and module interrupts */ + c_can_enable_all_interrupts(priv, ENABLE_ALL_INTERRUPTS); netif_start_queue(dev); return 0; @@ -1281,6 +1275,7 @@ int c_can_power_up(struct net_device *dev) u32 val; unsigned long time_out; struct c_can_priv *priv = netdev_priv(dev); + int ret; if (!(dev->flags & IFF_UP)) return 0; @@ -1307,7 +1302,11 @@ int c_can_power_up(struct net_device *dev) if (time_after(jiffies, time_out)) return -ETIMEDOUT; - return c_can_start(dev); + ret = c_can_start(dev); + if (!ret) + c_can_enable_all_interrupts(priv, ENABLE_ALL_INTERRUPTS); + + return ret; } EXPORT_SYMBOL_GPL(c_can_power_up); #endif -- cgit v1.2.1 From ef1d2e286a2d8876e03a3f58ea1a1f549727e518 Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Fri, 11 Apr 2014 08:13:11 +0000 Subject: can: c_can: Make bus off interrupt disable logic work The state change handler is called with device interrupts disabled already. So no point in disabling them again when we enter bus off state. But what's worse is that we reenable the interrupts at the end of NAPI poll unconditionally. So c_can_start() which is called from the restart timer can trigger interrupts which confuse the hell out of the half reinitialized driver/hw. Remove the pointless device interrupt disable in the BUS_OFF handler and prevent reenabling the device interrupts at the end of the poll routine when the current state is BUS_OFF. Signed-off-by: Thomas Gleixner Tested-by: Alexander Stein Signed-off-by: Marc Kleine-Budde --- drivers/net/can/c_can/c_can.c | 11 ++++------- 1 file changed, 4 insertions(+), 7 deletions(-) (limited to 'drivers') diff --git a/drivers/net/can/c_can/c_can.c b/drivers/net/can/c_can/c_can.c index b1629a47c03b..8c725f40bc1d 100644 --- a/drivers/net/can/c_can/c_can.c +++ b/drivers/net/can/c_can/c_can.c @@ -954,11 +954,6 @@ static int c_can_handle_state_change(struct net_device *dev, /* bus-off state */ priv->can.state = CAN_STATE_BUS_OFF; cf->can_id |= CAN_ERR_BUSOFF; - /* - * disable all interrupts in bus-off mode to ensure that - * the CPU is not hogged down - */ - c_can_enable_all_interrupts(priv, DISABLE_ALL_INTERRUPTS); can_bus_off(dev); break; default: @@ -1089,6 +1084,7 @@ static int c_can_poll(struct napi_struct *napi, int quota) netdev_dbg(dev, "entered bus off state\n"); work_done += c_can_handle_state_change(dev, C_CAN_BUS_OFF); + goto end; } /* handle bus recovery events */ @@ -1122,8 +1118,9 @@ static int c_can_poll(struct napi_struct *napi, int quota) end: if (work_done < quota) { napi_complete(napi); - /* enable all IRQs */ - c_can_enable_all_interrupts(priv, ENABLE_ALL_INTERRUPTS); + /* enable all IRQs if we are not in bus off state */ + if (priv->can.state != CAN_STATE_BUS_OFF) + c_can_enable_all_interrupts(priv, ENABLE_ALL_INTERRUPTS); } return work_done; -- cgit v1.2.1 From 9c64863a49bd23c5a3a983680eb500f7796c81be Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Fri, 11 Apr 2014 08:13:12 +0000 Subject: can: c_can: Do not access skb after net_receive_skb() There is no guarantee that the skb is in the same state after calling net_receive_skb(). It might be freed or reused. Not really harmful as its a read access, except you turn on the proper debugging options which catch a use after free. The whole can subsystem is full of this. Copy and paste .... Signed-off-by: Thomas Gleixner Tested-by: Alexander Stein Signed-off-by: Marc Kleine-Budde --- drivers/net/can/c_can/c_can.c | 9 ++++----- 1 file changed, 4 insertions(+), 5 deletions(-) (limited to 'drivers') diff --git a/drivers/net/can/c_can/c_can.c b/drivers/net/can/c_can/c_can.c index 8c725f40bc1d..603876109ba8 100644 --- a/drivers/net/can/c_can/c_can.c +++ b/drivers/net/can/c_can/c_can.c @@ -429,10 +429,10 @@ static int c_can_read_msg_object(struct net_device *dev, int iface, int ctrl) } } - netif_receive_skb(skb); - stats->rx_packets++; stats->rx_bytes += frame->can_dlc; + + netif_receive_skb(skb); return 0; } @@ -960,9 +960,9 @@ static int c_can_handle_state_change(struct net_device *dev, break; } - netif_receive_skb(skb); stats->rx_packets++; stats->rx_bytes += cf->can_dlc; + netif_receive_skb(skb); return 1; } @@ -1033,10 +1033,9 @@ static int c_can_handle_bus_err(struct net_device *dev, /* set a `lec` value so that we can check for updates later */ priv->write_reg(priv, C_CAN_STS_REG, LEC_UNUSED); - netif_receive_skb(skb); stats->rx_packets++; stats->rx_bytes += cf->can_dlc; - + netif_receive_skb(skb); return 1; } -- cgit v1.2.1 From f058d548e8071a1d148d6ebd94888d011c3ca71e Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Fri, 11 Apr 2014 08:13:12 +0000 Subject: can: c_can: Handle state change correctly If the allocation of an error skb fails, the state change handling returns w/o doing any work. That leaves the interface in a wreckaged state as the internal status is wrong. Split the interface handling and the skb handling. Signed-off-by: Thomas Gleixner Tested-by: Alexander Stein Signed-off-by: Marc Kleine-Budde --- drivers/net/can/c_can/c_can.c | 25 ++++++++++++++++++++----- 1 file changed, 20 insertions(+), 5 deletions(-) (limited to 'drivers') diff --git a/drivers/net/can/c_can/c_can.c b/drivers/net/can/c_can/c_can.c index 603876109ba8..246bcf92558c 100644 --- a/drivers/net/can/c_can/c_can.c +++ b/drivers/net/can/c_can/c_can.c @@ -914,6 +914,26 @@ static int c_can_handle_state_change(struct net_device *dev, struct sk_buff *skb; struct can_berr_counter bec; + switch (error_type) { + case C_CAN_ERROR_WARNING: + /* error warning state */ + priv->can.can_stats.error_warning++; + priv->can.state = CAN_STATE_ERROR_WARNING; + break; + case C_CAN_ERROR_PASSIVE: + /* error passive state */ + priv->can.can_stats.error_passive++; + priv->can.state = CAN_STATE_ERROR_PASSIVE; + break; + case C_CAN_BUS_OFF: + /* bus-off state */ + priv->can.state = CAN_STATE_BUS_OFF; + can_bus_off(dev); + break; + default: + break; + } + /* propagate the error condition to the CAN stack */ skb = alloc_can_err_skb(dev, &cf); if (unlikely(!skb)) @@ -927,8 +947,6 @@ static int c_can_handle_state_change(struct net_device *dev, switch (error_type) { case C_CAN_ERROR_WARNING: /* error warning state */ - priv->can.can_stats.error_warning++; - priv->can.state = CAN_STATE_ERROR_WARNING; cf->can_id |= CAN_ERR_CRTL; cf->data[1] = (bec.txerr > bec.rxerr) ? CAN_ERR_CRTL_TX_WARNING : @@ -939,8 +957,6 @@ static int c_can_handle_state_change(struct net_device *dev, break; case C_CAN_ERROR_PASSIVE: /* error passive state */ - priv->can.can_stats.error_passive++; - priv->can.state = CAN_STATE_ERROR_PASSIVE; cf->can_id |= CAN_ERR_CRTL; if (rx_err_passive) cf->data[1] |= CAN_ERR_CRTL_RX_PASSIVE; @@ -952,7 +968,6 @@ static int c_can_handle_state_change(struct net_device *dev, break; case C_CAN_BUS_OFF: /* bus-off state */ - priv->can.state = CAN_STATE_BUS_OFF; cf->can_id |= CAN_ERR_BUSOFF; can_bus_off(dev); break; -- cgit v1.2.1 From 097aec19689d8f2f76fd0c1becacf32801ae94c7 Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Fri, 11 Apr 2014 08:13:13 +0000 Subject: can: c_can: Fix berr reporting Reading the LEC type with return (mode & ENABLED) && (status & LEC_MASK); is not guaranteed to return (status & LEC_MASK) if the enabled bit in mode is set. It's guaranteed to return 0 or !=0. Remove the inline function and call unconditionally into the berr_handling code and return early when the reporting is disabled. Signed-off-by: Thomas Gleixner Tested-by: Alexander Stein Signed-off-by: Marc Kleine-Budde --- drivers/net/can/c_can/c_can.c | 16 ++++++---------- 1 file changed, 6 insertions(+), 10 deletions(-) (limited to 'drivers') diff --git a/drivers/net/can/c_can/c_can.c b/drivers/net/can/c_can/c_can.c index 246bcf92558c..9ef45b037a0c 100644 --- a/drivers/net/can/c_can/c_can.c +++ b/drivers/net/can/c_can/c_can.c @@ -171,6 +171,7 @@ enum c_can_lec_type { LEC_BIT0_ERROR, LEC_CRC_ERROR, LEC_UNUSED, + LEC_MASK = LEC_UNUSED, }; /* @@ -897,12 +898,6 @@ static int c_can_do_rx_poll(struct net_device *dev, int quota) return pkts; } -static inline int c_can_has_and_handle_berr(struct c_can_priv *priv) -{ - return (priv->can.ctrlmode & CAN_CTRLMODE_BERR_REPORTING) && - (priv->current_status & LEC_UNUSED); -} - static int c_can_handle_state_change(struct net_device *dev, enum c_can_bus_error_types error_type) { @@ -998,6 +993,9 @@ static int c_can_handle_bus_err(struct net_device *dev, if (lec_type == LEC_UNUSED || lec_type == LEC_NO_ERROR) return 0; + if (!(priv->can.ctrlmode & CAN_CTRLMODE_BERR_REPORTING)) + return 0; + /* propagate the error condition to the CAN stack */ skb = alloc_can_err_skb(dev, &cf); if (unlikely(!skb)) @@ -1057,7 +1055,6 @@ static int c_can_handle_bus_err(struct net_device *dev, static int c_can_poll(struct napi_struct *napi, int quota) { u16 irqstatus; - int lec_type = 0; int work_done = 0; struct net_device *dev = napi->dev; struct c_can_priv *priv = netdev_priv(dev); @@ -1116,9 +1113,8 @@ static int c_can_poll(struct napi_struct *napi, int quota) priv->last_status = priv->current_status; /* handle lec errors on the bus */ - lec_type = c_can_has_and_handle_berr(priv); - if (lec_type) - work_done += c_can_handle_bus_err(dev, lec_type); + work_done += c_can_handle_bus_err(dev, + priv->current_status & LEC_MASK); } else if ((irqstatus >= C_CAN_MSG_OBJ_RX_FIRST) && (irqstatus <= C_CAN_MSG_OBJ_RX_LAST)) { /* handle events corresponding to receive message objects */ -- cgit v1.2.1 From 1da394d889b4110bda954813ef32601c06118376 Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Fri, 11 Apr 2014 08:13:13 +0000 Subject: can: c_can: Always update error stats If the allocation of the error skb fails, we still want to see the error statistics. Signed-off-by: Thomas Gleixner Tested-by: Alexander Stein Signed-off-by: Marc Kleine-Budde --- drivers/net/can/c_can/c_can.c | 13 +++++++------ 1 file changed, 7 insertions(+), 6 deletions(-) (limited to 'drivers') diff --git a/drivers/net/can/c_can/c_can.c b/drivers/net/can/c_can/c_can.c index 9ef45b037a0c..6170e644426d 100644 --- a/drivers/net/can/c_can/c_can.c +++ b/drivers/net/can/c_can/c_can.c @@ -378,6 +378,9 @@ static int c_can_handle_lost_msg_obj(struct net_device *dev, priv->write_reg(priv, C_CAN_IFACE(MSGCTRL_REG, iface), ctrl); c_can_object_put(dev, iface, objno, IF_COMM_CONTROL); + stats->rx_errors++; + stats->rx_over_errors++; + /* create an error msg */ skb = alloc_can_err_skb(dev, &frame); if (unlikely(!skb)) @@ -385,8 +388,6 @@ static int c_can_handle_lost_msg_obj(struct net_device *dev, frame->can_id |= CAN_ERR_CRTL; frame->data[1] = CAN_ERR_CRTL_RX_OVERFLOW; - stats->rx_errors++; - stats->rx_over_errors++; netif_receive_skb(skb); return 1; @@ -996,6 +997,10 @@ static int c_can_handle_bus_err(struct net_device *dev, if (!(priv->can.ctrlmode & CAN_CTRLMODE_BERR_REPORTING)) return 0; + /* common for all type of bus errors */ + priv->can.can_stats.bus_error++; + stats->rx_errors++; + /* propagate the error condition to the CAN stack */ skb = alloc_can_err_skb(dev, &cf); if (unlikely(!skb)) @@ -1005,10 +1010,6 @@ static int c_can_handle_bus_err(struct net_device *dev, * check for 'last error code' which tells us the * type of the last error to occur on the CAN bus */ - - /* common for all type of bus errors */ - priv->can.can_stats.bus_error++; - stats->rx_errors++; cf->can_id |= CAN_ERR_PROT | CAN_ERR_BUSERROR; cf->data[2] |= CAN_ERR_PROT_UNSPEC; -- cgit v1.2.1 From 6b48ff8d934ab5ca6697b0e311e7869ff4a1d3f3 Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Fri, 11 Apr 2014 08:13:14 +0000 Subject: can: c_can: Simplify buffer reenabling Instead of writing to the message object we can simply clear the NewDat bit with the get method. Signed-off-by: Thomas Gleixner Tested-by: Alexander Stein Signed-off-by: Marc Kleine-Budde --- drivers/net/can/c_can/c_can.c | 16 ++++++---------- 1 file changed, 6 insertions(+), 10 deletions(-) (limited to 'drivers') diff --git a/drivers/net/can/c_can/c_can.c b/drivers/net/can/c_can/c_can.c index 6170e644426d..2aae073a1dc1 100644 --- a/drivers/net/can/c_can/c_can.c +++ b/drivers/net/can/c_can/c_can.c @@ -108,6 +108,7 @@ #define IF_COMM_CONTROL BIT(4) #define IF_COMM_CLR_INT_PND BIT(3) #define IF_COMM_TXRQST BIT(2) +#define IF_COMM_CLR_NEWDAT IF_COMM_TXRQST #define IF_COMM_DATAA BIT(1) #define IF_COMM_DATAB BIT(0) #define IF_COMM_ALL (IF_COMM_MASK | IF_COMM_ARB | \ @@ -120,7 +121,7 @@ IF_COMM_DATAA | IF_COMM_DATAB) /* For the high buffers we clear the interrupt bit and newdat */ -#define IF_COMM_RCV_HIGH (IF_COMM_RCV_LOW | IF_COMM_TXRQST) +#define IF_COMM_RCV_HIGH (IF_COMM_RCV_LOW | IF_COMM_CLR_NEWDAT) /* IFx arbitration */ #define IF_ARB_MSGVAL BIT(15) @@ -353,17 +354,12 @@ static void c_can_write_msg_object(struct net_device *dev, } static inline void c_can_activate_all_lower_rx_msg_obj(struct net_device *dev, - int iface, - int ctrl_mask) + int iface) { int i; - struct c_can_priv *priv = netdev_priv(dev); - for (i = C_CAN_MSG_OBJ_RX_FIRST; i <= C_CAN_MSG_RX_LOW_LAST; i++) { - priv->write_reg(priv, C_CAN_IFACE(MSGCTRL_REG, iface), - ctrl_mask & ~IF_MCONT_NEWDAT); - c_can_object_put(dev, iface, i, IF_COMM_CONTROL); - } + for (i = C_CAN_MSG_OBJ_RX_FIRST; i <= C_CAN_MSG_RX_LOW_LAST; i++) + c_can_object_get(dev, iface, i, IF_COMM_CLR_NEWDAT); } static int c_can_handle_lost_msg_obj(struct net_device *dev, @@ -829,7 +825,7 @@ static int c_can_read_objects(struct net_device *dev, struct c_can_priv *priv, if (obj == C_CAN_MSG_RX_LOW_LAST) /* activate all lower message objects */ - c_can_activate_all_lower_rx_msg_obj(dev, IF_RX, ctrl); + c_can_activate_all_lower_rx_msg_obj(dev, IF_RX); pkts++; quota--; -- cgit v1.2.1 From b9011aae9389c8853c1ccc2236f500a6e648c525 Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Fri, 11 Apr 2014 08:13:15 +0000 Subject: can: c_can: Avoid status register update for D_CAN On D_CAN the RXOK, TXOK and LEC bits are cleared/set on read of the status register. No need to update them. Signed-off-by: Thomas Gleixner Tested-by: Alexander Stein Signed-off-by: Marc Kleine-Budde --- drivers/net/can/c_can/c_can.c | 9 ++++++--- 1 file changed, 6 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/net/can/c_can/c_can.c b/drivers/net/can/c_can/c_can.c index 2aae073a1dc1..b381f7bfb895 100644 --- a/drivers/net/can/c_can/c_can.c +++ b/drivers/net/can/c_can/c_can.c @@ -1041,7 +1041,8 @@ static int c_can_handle_bus_err(struct net_device *dev, } /* set a `lec` value so that we can check for updates later */ - priv->write_reg(priv, C_CAN_STS_REG, LEC_UNUSED); + if (priv->type != BOSCH_D_CAN) + priv->write_reg(priv, C_CAN_STS_REG, LEC_UNUSED); stats->rx_packets++; stats->rx_bytes += cf->can_dlc; @@ -1066,11 +1067,13 @@ static int c_can_poll(struct napi_struct *napi, int quota) C_CAN_STS_REG); /* handle Tx/Rx events */ - if (priv->current_status & STATUS_TXOK) + if (priv->current_status & STATUS_TXOK && + priv->type != BOSCH_D_CAN) priv->write_reg(priv, C_CAN_STS_REG, priv->current_status & ~STATUS_TXOK); - if (priv->current_status & STATUS_RXOK) + if (priv->current_status & STATUS_RXOK && + priv->type != BOSCH_D_CAN) priv->write_reg(priv, C_CAN_STS_REG, priv->current_status & ~STATUS_RXOK); -- cgit v1.2.1 From fa39b54ccf28a0a85256f04881297cd75b8ef204 Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Fri, 11 Apr 2014 08:13:15 +0000 Subject: can: c_can: Get rid of pointless interrupts The driver handles pointlessly TWO interrupts per packet. The reason is that it enables the status interrupt which fires for each rx and tx packet and it enables the per message object interrupts as well. The status interrupt merily acks or in case of D_CAN ignores the TX/RX state and then the message object interrupt fires. The message objects interrupts are only useful if all message objects have hardware filters activated. But we don't have that and its not simple to implement in that driver without rewriting it completely. So we can ditch the message object interrupts and handle the RX/TX right away from the status interrupt. Instead of TWO we handle ONE. Note: We must keep the TXIE/RXIE bits in the message buffers because the status interrupt alone is not reliable enough in corner cases. If we ever have the need for HW filtering, then this code needs a complete overhaul and we can think about it then. For now we prefer a lower interrupt load. Signed-off-by: Thomas Gleixner Tested-by: Alexander Stein Signed-off-by: Marc Kleine-Budde --- drivers/net/can/c_can/c_can.c | 122 ++++++++++++++++-------------------------- drivers/net/can/c_can/c_can.h | 3 +- 2 files changed, 48 insertions(+), 77 deletions(-) (limited to 'drivers') diff --git a/drivers/net/can/c_can/c_can.c b/drivers/net/can/c_can/c_can.c index b381f7bfb895..09cb68772737 100644 --- a/drivers/net/can/c_can/c_can.c +++ b/drivers/net/can/c_can/c_can.c @@ -593,7 +593,7 @@ static void c_can_configure_msg_objects(struct net_device *dev) /* setup receive message objects */ for (i = C_CAN_MSG_OBJ_RX_FIRST; i < C_CAN_MSG_OBJ_RX_LAST; i++) c_can_setup_receive_object(dev, IF_RX, i, 0, 0, - (IF_MCONT_RXIE | IF_MCONT_UMASK) & ~IF_MCONT_EOB); + IF_MCONT_RXIE | IF_MCONT_UMASK); c_can_setup_receive_object(dev, IF_RX, C_CAN_MSG_OBJ_RX_LAST, 0, 0, IF_MCONT_EOB | IF_MCONT_RXIE | IF_MCONT_UMASK); @@ -649,8 +649,9 @@ static int c_can_start(struct net_device *dev) priv->can.state = CAN_STATE_ERROR_ACTIVE; - /* reset tx helper pointers */ + /* reset tx helper pointers and the rx mask */ priv->tx_next = priv->tx_echo = 0; + priv->rxmasked = 0; return 0; } @@ -823,9 +824,13 @@ static int c_can_read_objects(struct net_device *dev, struct c_can_priv *priv, /* read the data from the message object */ c_can_read_msg_object(dev, IF_RX, ctrl); - if (obj == C_CAN_MSG_RX_LOW_LAST) + if (obj < C_CAN_MSG_RX_LOW_LAST) + priv->rxmasked |= BIT(obj - 1); + else if (obj == C_CAN_MSG_RX_LOW_LAST) { + priv->rxmasked = 0; /* activate all lower message objects */ c_can_activate_all_lower_rx_msg_obj(dev, IF_RX); + } pkts++; quota--; @@ -870,7 +875,8 @@ static int c_can_do_rx_poll(struct net_device *dev, int quota) while (quota > 0) { if (!pend) { - pend = priv->read_reg(priv, C_CAN_INTPND1_REG); + pend = priv->read_reg(priv, C_CAN_NEWDAT1_REG); + pend &= ~priv->rxmasked; if (!pend) break; /* @@ -1040,10 +1046,6 @@ static int c_can_handle_bus_err(struct net_device *dev, break; } - /* set a `lec` value so that we can check for updates later */ - if (priv->type != BOSCH_D_CAN) - priv->write_reg(priv, C_CAN_STS_REG, LEC_UNUSED); - stats->rx_packets++; stats->rx_bytes += cf->can_dlc; netif_receive_skb(skb); @@ -1052,79 +1054,50 @@ static int c_can_handle_bus_err(struct net_device *dev, static int c_can_poll(struct napi_struct *napi, int quota) { - u16 irqstatus; - int work_done = 0; struct net_device *dev = napi->dev; struct c_can_priv *priv = netdev_priv(dev); + u16 curr, last = priv->last_status; + int work_done = 0; - irqstatus = priv->irqstatus; - if (!irqstatus) - goto end; + priv->last_status = curr = priv->read_reg(priv, C_CAN_STS_REG); + /* Ack status on C_CAN. D_CAN is self clearing */ + if (priv->type != BOSCH_D_CAN) + priv->write_reg(priv, C_CAN_STS_REG, LEC_UNUSED); - /* status events have the highest priority */ - if (irqstatus == STATUS_INTERRUPT) { - priv->current_status = priv->read_reg(priv, - C_CAN_STS_REG); - - /* handle Tx/Rx events */ - if (priv->current_status & STATUS_TXOK && - priv->type != BOSCH_D_CAN) - priv->write_reg(priv, C_CAN_STS_REG, - priv->current_status & ~STATUS_TXOK); - - if (priv->current_status & STATUS_RXOK && - priv->type != BOSCH_D_CAN) - priv->write_reg(priv, C_CAN_STS_REG, - priv->current_status & ~STATUS_RXOK); - - /* handle state changes */ - if ((priv->current_status & STATUS_EWARN) && - (!(priv->last_status & STATUS_EWARN))) { - netdev_dbg(dev, "entered error warning state\n"); - work_done += c_can_handle_state_change(dev, - C_CAN_ERROR_WARNING); - } - if ((priv->current_status & STATUS_EPASS) && - (!(priv->last_status & STATUS_EPASS))) { - netdev_dbg(dev, "entered error passive state\n"); - work_done += c_can_handle_state_change(dev, - C_CAN_ERROR_PASSIVE); - } - if ((priv->current_status & STATUS_BOFF) && - (!(priv->last_status & STATUS_BOFF))) { - netdev_dbg(dev, "entered bus off state\n"); - work_done += c_can_handle_state_change(dev, - C_CAN_BUS_OFF); - goto end; - } + /* handle state changes */ + if ((curr & STATUS_EWARN) && (!(last & STATUS_EWARN))) { + netdev_dbg(dev, "entered error warning state\n"); + work_done += c_can_handle_state_change(dev, C_CAN_ERROR_WARNING); + } - /* handle bus recovery events */ - if ((!(priv->current_status & STATUS_BOFF)) && - (priv->last_status & STATUS_BOFF)) { - netdev_dbg(dev, "left bus off state\n"); - priv->can.state = CAN_STATE_ERROR_ACTIVE; - } - if ((!(priv->current_status & STATUS_EPASS)) && - (priv->last_status & STATUS_EPASS)) { - netdev_dbg(dev, "left error passive state\n"); - priv->can.state = CAN_STATE_ERROR_ACTIVE; - } + if ((curr & STATUS_EPASS) && (!(last & STATUS_EPASS))) { + netdev_dbg(dev, "entered error passive state\n"); + work_done += c_can_handle_state_change(dev, C_CAN_ERROR_PASSIVE); + } - priv->last_status = priv->current_status; - - /* handle lec errors on the bus */ - work_done += c_can_handle_bus_err(dev, - priv->current_status & LEC_MASK); - } else if ((irqstatus >= C_CAN_MSG_OBJ_RX_FIRST) && - (irqstatus <= C_CAN_MSG_OBJ_RX_LAST)) { - /* handle events corresponding to receive message objects */ - work_done += c_can_do_rx_poll(dev, (quota - work_done)); - } else if ((irqstatus >= C_CAN_MSG_OBJ_TX_FIRST) && - (irqstatus <= C_CAN_MSG_OBJ_TX_LAST)) { - /* handle events corresponding to transmit message objects */ - c_can_do_tx(dev); + if ((curr & STATUS_BOFF) && (!(last & STATUS_BOFF))) { + netdev_dbg(dev, "entered bus off state\n"); + work_done += c_can_handle_state_change(dev, C_CAN_BUS_OFF); + goto end; } + /* handle bus recovery events */ + if ((!(curr & STATUS_BOFF)) && (last & STATUS_BOFF)) { + netdev_dbg(dev, "left bus off state\n"); + priv->can.state = CAN_STATE_ERROR_ACTIVE; + } + if ((!(curr & STATUS_EPASS)) && (last & STATUS_EPASS)) { + netdev_dbg(dev, "left error passive state\n"); + priv->can.state = CAN_STATE_ERROR_ACTIVE; + } + + /* handle lec errors on the bus */ + work_done += c_can_handle_bus_err(dev, curr & LEC_MASK); + + /* Handle Tx/Rx events. We do this unconditionally */ + work_done += c_can_do_rx_poll(dev, (quota - work_done)); + c_can_do_tx(dev); + end: if (work_done < quota) { napi_complete(napi); @@ -1141,8 +1114,7 @@ static irqreturn_t c_can_isr(int irq, void *dev_id) struct net_device *dev = (struct net_device *)dev_id; struct c_can_priv *priv = netdev_priv(dev); - priv->irqstatus = priv->read_reg(priv, C_CAN_INT_REG); - if (!priv->irqstatus) + if (!priv->read_reg(priv, C_CAN_INT_REG)) return IRQ_NONE; /* disable all interrupts and schedule the NAPI */ diff --git a/drivers/net/can/c_can/c_can.h b/drivers/net/can/c_can/c_can.h index faa8404162b3..cd91960ce92c 100644 --- a/drivers/net/can/c_can/c_can.h +++ b/drivers/net/can/c_can/c_can.h @@ -185,7 +185,6 @@ struct c_can_priv { struct device *device; spinlock_t xmit_lock; int tx_object; - int current_status; int last_status; u16 (*read_reg) (struct c_can_priv *priv, enum reg index); void (*write_reg) (struct c_can_priv *priv, enum reg index, u16 val); @@ -195,11 +194,11 @@ struct c_can_priv { unsigned int tx_next; unsigned int tx_echo; void *priv; /* for board-specific data */ - u16 irqstatus; enum c_can_dev_id type; u32 __iomem *raminit_ctrlreg; unsigned int instance; void (*raminit) (const struct c_can_priv *priv, bool enable); + u32 rxmasked; u32 dlc[C_CAN_MSG_OBJ_TX_NUM]; }; -- cgit v1.2.1 From 2b9aecdce227e099349b73e3a074936d3c51f2a9 Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Fri, 11 Apr 2014 08:13:16 +0000 Subject: can: c_can: Disable rx split as workaround The RX buffer split causes packet loss in the hardware: What happens is: RX Packet 1 --> message buffer 1 (newdat bit is not cleared) RX Packet 2 --> message buffer 2 (newdat bit is not cleared) RX Packet 3 --> message buffer 3 (newdat bit is not cleared) RX Packet 4 --> message buffer 4 (newdat bit is not cleared) RX Packet 5 --> message buffer 5 (newdat bit is not cleared) RX Packet 6 --> message buffer 6 (newdat bit is not cleared) RX Packet 7 --> message buffer 7 (newdat bit is not cleared) RX Packet 8 --> message buffer 8 (newdat bit is not cleared) Clear newdat bit in message buffer 1 Clear newdat bit in message buffer 2 Clear newdat bit in message buffer 3 Clear newdat bit in message buffer 4 Clear newdat bit in message buffer 5 Clear newdat bit in message buffer 6 Clear newdat bit in message buffer 7 Clear newdat bit in message buffer 8 Now if during that clearing of newdat bits, a new message comes in, the HW gets confused and drops it. It does not matter how many of them you clear. I put a delay between clear of buffer 1 and buffer 2 which was long enough that the message should have been queued either in buffer 1 or buffer 9. But it did not show up anywhere. The next message ended up in buffer 1. So the hardware lost a packet of course without telling it via one of the error handlers. That does not happen on all clear newdat bit events. I see one of 10k packets dropped in the scenario which allows us to reproduce. But the trace looks always the same. Not splitting the RX Buffer avoids the packet loss but can cause reordering. It's hard to trigger, but it CAN happen. With that mode we use the HW as it was probably designed for. We read from the buffer 1 upwards and clear the buffer as we get the message. That's how all microcontrollers use it. So I assume that the way we handle the buffers was never really tested. According to the public documentation it should just work :) Let the user decide which evil is the lesser one. [ Oliver Hartkopp: Provided a sane config option and help text and made me switch to favour potential and unlikely reordering over packet loss ] Signed-off-by: Thomas Gleixner Tested-by: Alexander Stein Signed-off-by: Marc Kleine-Budde --- drivers/net/can/c_can/Kconfig | 7 +++++ drivers/net/can/c_can/c_can.c | 62 +++++++++++++++++++++++++++++++++---------- 2 files changed, 55 insertions(+), 14 deletions(-) (limited to 'drivers') diff --git a/drivers/net/can/c_can/Kconfig b/drivers/net/can/c_can/Kconfig index 61ffc12d8fd8..8ab7103d4f44 100644 --- a/drivers/net/can/c_can/Kconfig +++ b/drivers/net/can/c_can/Kconfig @@ -14,6 +14,13 @@ config CAN_C_CAN_PLATFORM SPEAr1310 and SPEAr320 evaluation boards & TI (www.ti.com) boards like am335x, dm814x, dm813x and dm811x. +config CAN_C_CAN_STRICT_FRAME_ORDERING + bool "Force a strict RX CAN frame order (may cause frame loss)" + ---help--- + The RX split buffer prevents packet reordering but can cause packet + loss. Only enable this option when you accept to lose CAN frames + in favour of getting the received CAN frames in the correct order. + config CAN_C_CAN_PCI tristate "Generic PCI Bus based C_CAN/D_CAN driver" depends on PCI diff --git a/drivers/net/can/c_can/c_can.c b/drivers/net/can/c_can/c_can.c index 09cb68772737..c1a8684ed1c8 100644 --- a/drivers/net/can/c_can/c_can.c +++ b/drivers/net/can/c_can/c_can.c @@ -791,18 +791,39 @@ static u32 c_can_adjust_pending(u32 pend) return pend & ~((1 << lasts) - 1); } +static inline void c_can_rx_object_get(struct net_device *dev, u32 obj) +{ +#ifdef CONFIG_CAN_C_CAN_STRICT_FRAME_ORDERING + if (obj < C_CAN_MSG_RX_LOW_LAST) + c_can_object_get(dev, IF_RX, obj, IF_COMM_RCV_LOW); + else +#endif + c_can_object_get(dev, IF_RX, obj, IF_COMM_RCV_HIGH); +} + +static inline void c_can_rx_finalize(struct net_device *dev, + struct c_can_priv *priv, u32 obj) +{ +#ifdef CONFIG_CAN_C_CAN_STRICT_FRAME_ORDERING + if (obj < C_CAN_MSG_RX_LOW_LAST) + priv->rxmasked |= BIT(obj - 1); + else if (obj == C_CAN_MSG_RX_LOW_LAST) { + priv->rxmasked = 0; + /* activate all lower message objects */ + c_can_activate_all_lower_rx_msg_obj(dev, IF_RX); + } +#endif +} + static int c_can_read_objects(struct net_device *dev, struct c_can_priv *priv, u32 pend, int quota) { - u32 pkts = 0, ctrl, obj, mcmd; + u32 pkts = 0, ctrl, obj; while ((obj = ffs(pend)) && quota > 0) { pend &= ~BIT(obj - 1); - mcmd = obj < C_CAN_MSG_RX_LOW_LAST ? - IF_COMM_RCV_LOW : IF_COMM_RCV_HIGH; - - c_can_object_get(dev, IF_RX, obj, mcmd); + c_can_rx_object_get(dev, obj); ctrl = priv->read_reg(priv, C_CAN_IFACE(MSGCTRL_REG, IF_RX)); if (ctrl & IF_MCONT_MSGLST) { @@ -824,13 +845,7 @@ static int c_can_read_objects(struct net_device *dev, struct c_can_priv *priv, /* read the data from the message object */ c_can_read_msg_object(dev, IF_RX, ctrl); - if (obj < C_CAN_MSG_RX_LOW_LAST) - priv->rxmasked |= BIT(obj - 1); - else if (obj == C_CAN_MSG_RX_LOW_LAST) { - priv->rxmasked = 0; - /* activate all lower message objects */ - c_can_activate_all_lower_rx_msg_obj(dev, IF_RX); - } + c_can_rx_finalize(dev, priv, obj); pkts++; quota--; @@ -839,6 +854,16 @@ static int c_can_read_objects(struct net_device *dev, struct c_can_priv *priv, return pkts; } +static inline u32 c_can_get_pending(struct c_can_priv *priv) +{ + u32 pend = priv->read_reg(priv, C_CAN_NEWDAT1_REG); + +#ifdef CONFIG_CAN_C_CAN_STRICT_FRAME_ORDERING + pend &= ~priv->rxmasked; +#endif + return pend; +} + /* * theory of operation: * @@ -848,6 +873,8 @@ static int c_can_read_objects(struct net_device *dev, struct c_can_priv *priv, * has arrived. To work-around this issue, we keep two groups of message * objects whose partitioning is defined by C_CAN_MSG_OBJ_RX_SPLIT. * + * If CONFIG_CAN_C_CAN_STRICT_FRAME_ORDERING = y + * * To ensure in-order frame reception we use the following * approach while re-activating a message object to receive further * frames: @@ -860,6 +887,14 @@ static int c_can_read_objects(struct net_device *dev, struct c_can_priv *priv, * - if the current message object number is greater than * C_CAN_MSG_RX_LOW_LAST then clear the NEWDAT bit of * only this message object. + * + * This can cause packet loss! + * + * If CONFIG_CAN_C_CAN_STRICT_FRAME_ORDERING = n + * + * We clear the newdat bit right away. + * + * This can result in packet reordering when the readout is slow. */ static int c_can_do_rx_poll(struct net_device *dev, int quota) { @@ -875,8 +910,7 @@ static int c_can_do_rx_poll(struct net_device *dev, int quota) while (quota > 0) { if (!pend) { - pend = priv->read_reg(priv, C_CAN_NEWDAT1_REG); - pend &= ~priv->rxmasked; + pend = c_can_get_pending(priv); if (!pend) break; /* -- cgit v1.2.1 From d61d09de023320b95a536eb4d31941e67002a93c Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Fri, 11 Apr 2014 08:13:17 +0000 Subject: can: c_can: Work around C_CAN RX wreckage Alexander reported that the new optimized handling of the RX fifo causes random packet loss on Intel PCH C_CAN hardware. After a few fruitless debugging sessions I got hold of a PCH (eg20t) afflicted system. That machine does not have the CAN interface wired up, but it was possible to reproduce the issue with the HW loopback mode. As Alexander observed correctly, clearing the NewDat flag along with reading out the message buffer causes that issue on C_CAN, while D_CAN handles that correctly. Instead of restoring the original message buffer handling horror the following workaround solves the issue: transfer buffer to IF without clearing the NewDat handle the message clear NewDat bit That's similar to the original code but conditional for C_CAN. I really wonder why all user manuals (C_CAN, Intel PCH and some more) recommend to clear the NewDat bit right away. The knows it all Oracle operated by Gurgle does not unearth any useful information either. I simply cannot believe that we are the first to uncover that HW issue. Reported-and-tested-by: Alexander Stein Signed-off-by: Thomas Gleixner Signed-off-by: Marc Kleine-Budde --- drivers/net/can/c_can/c_can.c | 13 ++++++++++--- drivers/net/can/c_can/c_can.h | 1 + 2 files changed, 11 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/net/can/c_can/c_can.c b/drivers/net/can/c_can/c_can.c index c1a8684ed1c8..5d43c5a0e2d9 100644 --- a/drivers/net/can/c_can/c_can.c +++ b/drivers/net/can/c_can/c_can.c @@ -647,6 +647,10 @@ static int c_can_start(struct net_device *dev) if (err) return err; + /* Setup the command for new messages */ + priv->comm_rcv_high = priv->type != BOSCH_D_CAN ? + IF_COMM_RCV_LOW : IF_COMM_RCV_HIGH; + priv->can.state = CAN_STATE_ERROR_ACTIVE; /* reset tx helper pointers and the rx mask */ @@ -791,14 +795,15 @@ static u32 c_can_adjust_pending(u32 pend) return pend & ~((1 << lasts) - 1); } -static inline void c_can_rx_object_get(struct net_device *dev, u32 obj) +static inline void c_can_rx_object_get(struct net_device *dev, + struct c_can_priv *priv, u32 obj) { #ifdef CONFIG_CAN_C_CAN_STRICT_FRAME_ORDERING if (obj < C_CAN_MSG_RX_LOW_LAST) c_can_object_get(dev, IF_RX, obj, IF_COMM_RCV_LOW); else #endif - c_can_object_get(dev, IF_RX, obj, IF_COMM_RCV_HIGH); + c_can_object_get(dev, IF_RX, obj, priv->comm_rcv_high); } static inline void c_can_rx_finalize(struct net_device *dev, @@ -813,6 +818,8 @@ static inline void c_can_rx_finalize(struct net_device *dev, c_can_activate_all_lower_rx_msg_obj(dev, IF_RX); } #endif + if (priv->type != BOSCH_D_CAN) + c_can_object_get(dev, IF_RX, obj, IF_COMM_CLR_NEWDAT); } static int c_can_read_objects(struct net_device *dev, struct c_can_priv *priv, @@ -823,7 +830,7 @@ static int c_can_read_objects(struct net_device *dev, struct c_can_priv *priv, while ((obj = ffs(pend)) && quota > 0) { pend &= ~BIT(obj - 1); - c_can_rx_object_get(dev, obj); + c_can_rx_object_get(dev, priv, obj); ctrl = priv->read_reg(priv, C_CAN_IFACE(MSGCTRL_REG, IF_RX)); if (ctrl & IF_MCONT_MSGLST) { diff --git a/drivers/net/can/c_can/c_can.h b/drivers/net/can/c_can/c_can.h index cd91960ce92c..792944c74b94 100644 --- a/drivers/net/can/c_can/c_can.h +++ b/drivers/net/can/c_can/c_can.h @@ -198,6 +198,7 @@ struct c_can_priv { u32 __iomem *raminit_ctrlreg; unsigned int instance; void (*raminit) (const struct c_can_priv *priv, bool enable); + u32 comm_rcv_high; u32 rxmasked; u32 dlc[C_CAN_MSG_OBJ_TX_NUM]; }; -- cgit v1.2.1 From 2d5f4f85695623fab5fac7db19fd0290ef54eca8 Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Fri, 11 Apr 2014 08:13:17 +0000 Subject: can: c_can: Cleanup irq enable/disable Signed-off-by: Thomas Gleixner Tested-by: Alexander Stein Signed-off-by: Marc Kleine-Budde --- drivers/net/can/c_can/c_can.c | 37 ++++++++++++------------------------- 1 file changed, 12 insertions(+), 25 deletions(-) (limited to 'drivers') diff --git a/drivers/net/can/c_can/c_can.c b/drivers/net/can/c_can/c_can.c index 5d43c5a0e2d9..562faef29896 100644 --- a/drivers/net/can/c_can/c_can.c +++ b/drivers/net/can/c_can/c_can.c @@ -60,6 +60,8 @@ #define CONTROL_IE BIT(1) #define CONTROL_INIT BIT(0) +#define CONTROL_IRQMSK (CONTROL_EIE | CONTROL_IE | CONTROL_SIE) + /* test register */ #define TEST_RX BIT(7) #define TEST_TX1 BIT(6) @@ -146,13 +148,6 @@ #define IF_RX 0 #define IF_TX 1 -/* status interrupt */ -#define STATUS_INTERRUPT 0x8000 - -/* global interrupt masks */ -#define ENABLE_ALL_INTERRUPTS 1 -#define DISABLE_ALL_INTERRUPTS 0 - /* minimum timeout for checking BUSY status */ #define MIN_TIMEOUT_VALUE 6 @@ -246,18 +241,14 @@ static u32 c_can_read_reg32(struct c_can_priv *priv, enum reg index) return val; } -static void c_can_enable_all_interrupts(struct c_can_priv *priv, - int enable) +static void c_can_irq_control(struct c_can_priv *priv, bool enable) { - unsigned int cntrl_save = priv->read_reg(priv, - C_CAN_CTRL_REG); + u32 ctrl = priv->read_reg(priv, C_CAN_CTRL_REG) & ~CONTROL_IRQMSK; if (enable) - cntrl_save |= (CONTROL_SIE | CONTROL_EIE | CONTROL_IE); - else - cntrl_save &= ~(CONTROL_EIE | CONTROL_IE | CONTROL_SIE); + ctrl |= CONTROL_IRQMSK; - priv->write_reg(priv, C_CAN_CTRL_REG, cntrl_save); + priv->write_reg(priv, C_CAN_CTRL_REG, ctrl); } static inline int c_can_msg_obj_is_busy(struct c_can_priv *priv, int iface) @@ -664,10 +655,7 @@ static void c_can_stop(struct net_device *dev) { struct c_can_priv *priv = netdev_priv(dev); - /* disable all interrupts */ - c_can_enable_all_interrupts(priv, DISABLE_ALL_INTERRUPTS); - - /* set the state as STOPPED */ + c_can_irq_control(priv, false); priv->can.state = CAN_STATE_STOPPED; } @@ -682,8 +670,7 @@ static int c_can_set_mode(struct net_device *dev, enum can_mode mode) if (err) return err; netif_wake_queue(dev); - /* enable status change, error and module interrupts */ - c_can_enable_all_interrupts(priv, ENABLE_ALL_INTERRUPTS); + c_can_irq_control(priv, true); break; default: return -EOPNOTSUPP; @@ -1144,7 +1131,7 @@ end: napi_complete(napi); /* enable all IRQs if we are not in bus off state */ if (priv->can.state != CAN_STATE_BUS_OFF) - c_can_enable_all_interrupts(priv, ENABLE_ALL_INTERRUPTS); + c_can_irq_control(priv, true); } return work_done; @@ -1159,7 +1146,7 @@ static irqreturn_t c_can_isr(int irq, void *dev_id) return IRQ_NONE; /* disable all interrupts and schedule the NAPI */ - c_can_enable_all_interrupts(priv, DISABLE_ALL_INTERRUPTS); + c_can_irq_control(priv, false); napi_schedule(&priv->napi); return IRQ_HANDLED; @@ -1197,7 +1184,7 @@ static int c_can_open(struct net_device *dev) napi_enable(&priv->napi); /* enable status change, error and module interrupts */ - c_can_enable_all_interrupts(priv, ENABLE_ALL_INTERRUPTS); + c_can_irq_control(priv, true); netif_start_queue(dev); return 0; @@ -1324,7 +1311,7 @@ int c_can_power_up(struct net_device *dev) ret = c_can_start(dev); if (!ret) - c_can_enable_all_interrupts(priv, ENABLE_ALL_INTERRUPTS); + c_can_irq_control(priv, true); return ret; } -- cgit v1.2.1 From 4fb6dccd13b27651998f773755e2a1db461c62f1 Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Fri, 11 Apr 2014 08:13:18 +0000 Subject: can: c_can: Cleanup c_can_read_msg_object() Signed-off-by: Thomas Gleixner Tested-by: Alexander Stein Signed-off-by: Marc Kleine-Budde --- drivers/net/can/c_can/c_can.c | 32 +++++++++++++++----------------- 1 file changed, 15 insertions(+), 17 deletions(-) (limited to 'drivers') diff --git a/drivers/net/can/c_can/c_can.c b/drivers/net/can/c_can/c_can.c index 562faef29896..d0daef8d67e1 100644 --- a/drivers/net/can/c_can/c_can.c +++ b/drivers/net/can/c_can/c_can.c @@ -380,15 +380,13 @@ static int c_can_handle_lost_msg_obj(struct net_device *dev, return 1; } -static int c_can_read_msg_object(struct net_device *dev, int iface, int ctrl) +static int c_can_read_msg_object(struct net_device *dev, int iface, u32 ctrl) { - u16 flags, data; - int i; - unsigned int val; - struct c_can_priv *priv = netdev_priv(dev); struct net_device_stats *stats = &dev->stats; - struct sk_buff *skb; + struct c_can_priv *priv = netdev_priv(dev); struct can_frame *frame; + struct sk_buff *skb; + u32 arb, data; skb = alloc_can_skb(dev, &frame); if (!skb) { @@ -398,21 +396,21 @@ static int c_can_read_msg_object(struct net_device *dev, int iface, int ctrl) frame->can_dlc = get_can_dlc(ctrl & 0x0F); - flags = priv->read_reg(priv, C_CAN_IFACE(ARB2_REG, iface)); - val = priv->read_reg(priv, C_CAN_IFACE(ARB1_REG, iface)) | - (flags << 16); + arb = priv->read_reg(priv, C_CAN_IFACE(ARB1_REG, iface)); + arb |= priv->read_reg(priv, C_CAN_IFACE(ARB2_REG, iface)) << 16; - if (flags & IF_ARB_MSGXTD) - frame->can_id = (val & CAN_EFF_MASK) | CAN_EFF_FLAG; + if (arb & (IF_ARB_MSGXTD << 16)) + frame->can_id = (arb & CAN_EFF_MASK) | CAN_EFF_FLAG; else - frame->can_id = (val >> 18) & CAN_SFF_MASK; + frame->can_id = (arb >> 18) & CAN_SFF_MASK; - if (flags & IF_ARB_TRANSMIT) + if (arb & (IF_ARB_TRANSMIT << 16)) { frame->can_id |= CAN_RTR_FLAG; - else { - for (i = 0; i < frame->can_dlc; i += 2) { - data = priv->read_reg(priv, - C_CAN_IFACE(DATA1_REG, iface) + i / 2); + } else { + int i, dreg = C_CAN_IFACE(DATA1_REG, iface); + + for (i = 0; i < frame->can_dlc; i += 2, dreg ++) { + data = priv->read_reg(priv, dreg); frame->data[i] = data; frame->data[i + 1] = data >> 8; } -- cgit v1.2.1 From 8ff2de0fb41560cfdf072eb41b5a5b4799d126ea Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Fri, 11 Apr 2014 08:13:18 +0000 Subject: can: c_can: Cleanup setup of receive buffers Signed-off-by: Thomas Gleixner Tested-by: Alexander Stein Signed-off-by: Marc Kleine-Budde --- drivers/net/can/c_can/c_can.c | 38 +++++++++++++++++--------------------- 1 file changed, 17 insertions(+), 21 deletions(-) (limited to 'drivers') diff --git a/drivers/net/can/c_can/c_can.c b/drivers/net/can/c_can/c_can.c index d0daef8d67e1..e4eaa841a826 100644 --- a/drivers/net/can/c_can/c_can.c +++ b/drivers/net/can/c_can/c_can.c @@ -125,6 +125,10 @@ /* For the high buffers we clear the interrupt bit and newdat */ #define IF_COMM_RCV_HIGH (IF_COMM_RCV_LOW | IF_COMM_CLR_NEWDAT) + +/* Receive setup of message objects */ +#define IF_COMM_RCV_SETUP (IF_COMM_MASK | IF_COMM_ARB | IF_COMM_CONTROL) + /* IFx arbitration */ #define IF_ARB_MSGVAL BIT(15) #define IF_ARB_MSGXTD BIT(14) @@ -142,6 +146,9 @@ #define IF_MCONT_EOB BIT(7) #define IF_MCONT_DLC_MASK 0xf +#define IF_MCONT_RCV (IF_MCONT_RXIE | IF_MCONT_UMASK) +#define IF_MCONT_RCV_EOB (IF_MCONT_RCV | IF_MCONT_EOB) + /* * Use IF1 for RX and IF2 for TX */ @@ -424,30 +431,20 @@ static int c_can_read_msg_object(struct net_device *dev, int iface, u32 ctrl) } static void c_can_setup_receive_object(struct net_device *dev, int iface, - int objno, unsigned int mask, - unsigned int id, unsigned int mcont) + u32 obj, u32 mask, u32 id, u32 mcont) { struct c_can_priv *priv = netdev_priv(dev); - priv->write_reg(priv, C_CAN_IFACE(MASK1_REG, iface), - IFX_WRITE_LOW_16BIT(mask)); - - /* According to C_CAN documentation, the reserved bit - * in IFx_MASK2 register is fixed 1 - */ - priv->write_reg(priv, C_CAN_IFACE(MASK2_REG, iface), - IFX_WRITE_HIGH_16BIT(mask) | BIT(13)); + mask |= BIT(29); + priv->write_reg(priv, C_CAN_IFACE(MASK1_REG, iface), mask); + priv->write_reg(priv, C_CAN_IFACE(MASK2_REG, iface), mask >> 16); - priv->write_reg(priv, C_CAN_IFACE(ARB1_REG, iface), - IFX_WRITE_LOW_16BIT(id)); - priv->write_reg(priv, C_CAN_IFACE(ARB2_REG, iface), - (IF_ARB_MSGVAL | IFX_WRITE_HIGH_16BIT(id))); + id |= IF_ARB_MSGVAL << 16; + priv->write_reg(priv, C_CAN_IFACE(ARB1_REG, iface), id); + priv->write_reg(priv, C_CAN_IFACE(ARB2_REG, iface), id >> 16); priv->write_reg(priv, C_CAN_IFACE(MSGCTRL_REG, iface), mcont); - c_can_object_put(dev, iface, objno, IF_COMM_ALL & ~IF_COMM_TXRQST); - - netdev_dbg(dev, "obj no:%d, msgval:0x%08x\n", objno, - c_can_read_reg32(priv, C_CAN_MSGVAL1_REG)); + c_can_object_put(dev, iface, obj, IF_COMM_RCV_SETUP); } static void c_can_inval_msg_object(struct net_device *dev, int iface, int objno) @@ -581,11 +578,10 @@ static void c_can_configure_msg_objects(struct net_device *dev) /* setup receive message objects */ for (i = C_CAN_MSG_OBJ_RX_FIRST; i < C_CAN_MSG_OBJ_RX_LAST; i++) - c_can_setup_receive_object(dev, IF_RX, i, 0, 0, - IF_MCONT_RXIE | IF_MCONT_UMASK); + c_can_setup_receive_object(dev, IF_RX, i, 0, 0, IF_MCONT_RCV); c_can_setup_receive_object(dev, IF_RX, C_CAN_MSG_OBJ_RX_LAST, 0, 0, - IF_MCONT_EOB | IF_MCONT_RXIE | IF_MCONT_UMASK); + IF_MCONT_RCV_EOB); } /* -- cgit v1.2.1 From b07faaaf1f60c2b76604917fc5a9937974d78e92 Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Fri, 11 Apr 2014 08:13:19 +0000 Subject: can: c_can: Cleanup c_can_inval_msg_object() Signed-off-by: Thomas Gleixner Tested-by: Alexander Stein Signed-off-by: Marc Kleine-Budde --- drivers/net/can/c_can/c_can.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) (limited to 'drivers') diff --git a/drivers/net/can/c_can/c_can.c b/drivers/net/can/c_can/c_can.c index e4eaa841a826..bf3aed43cf2c 100644 --- a/drivers/net/can/c_can/c_can.c +++ b/drivers/net/can/c_can/c_can.c @@ -129,6 +129,9 @@ /* Receive setup of message objects */ #define IF_COMM_RCV_SETUP (IF_COMM_MASK | IF_COMM_ARB | IF_COMM_CONTROL) +/* Invalidation of message objects */ +#define IF_COMM_INVAL (IF_COMM_ARB | IF_COMM_CONTROL) + /* IFx arbitration */ #define IF_ARB_MSGVAL BIT(15) #define IF_ARB_MSGXTD BIT(14) @@ -447,7 +450,7 @@ static void c_can_setup_receive_object(struct net_device *dev, int iface, c_can_object_put(dev, iface, obj, IF_COMM_RCV_SETUP); } -static void c_can_inval_msg_object(struct net_device *dev, int iface, int objno) +static void c_can_inval_msg_object(struct net_device *dev, int iface, int obj) { struct c_can_priv *priv = netdev_priv(dev); @@ -455,10 +458,7 @@ static void c_can_inval_msg_object(struct net_device *dev, int iface, int objno) priv->write_reg(priv, C_CAN_IFACE(ARB2_REG, iface), 0); priv->write_reg(priv, C_CAN_IFACE(MSGCTRL_REG, iface), 0); - c_can_object_put(dev, iface, objno, IF_COMM_ARB | IF_COMM_CONTROL); - - netdev_dbg(dev, "obj no:%d, msgval:0x%08x\n", objno, - c_can_read_reg32(priv, C_CAN_MSGVAL1_REG)); + c_can_object_put(dev, iface, obj, IF_COMM_INVAL); } static inline int c_can_is_next_tx_obj_busy(struct c_can_priv *priv, int objno) -- cgit v1.2.1 From 7af28630b87d0b2eefeee8547ad52df7e0e1b1c4 Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Fri, 11 Apr 2014 08:13:20 +0000 Subject: can: c_can: Cleanup c_can_msg_obj_put/get() Sigh! Signed-off-by: Thomas Gleixner Tested-by: Alexander Stein Signed-off-by: Marc Kleine-Budde --- drivers/net/can/c_can/c_can.c | 60 ++++++++++++------------------------------- 1 file changed, 16 insertions(+), 44 deletions(-) (limited to 'drivers') diff --git a/drivers/net/can/c_can/c_can.c b/drivers/net/can/c_can/c_can.c index bf3aed43cf2c..c654efbcc527 100644 --- a/drivers/net/can/c_can/c_can.c +++ b/drivers/net/can/c_can/c_can.c @@ -261,61 +261,33 @@ static void c_can_irq_control(struct c_can_priv *priv, bool enable) priv->write_reg(priv, C_CAN_CTRL_REG, ctrl); } -static inline int c_can_msg_obj_is_busy(struct c_can_priv *priv, int iface) +static void c_can_obj_update(struct net_device *dev, int iface, u32 cmd, u32 obj) { - int count = MIN_TIMEOUT_VALUE; + struct c_can_priv *priv = netdev_priv(dev); + int cnt, reg = C_CAN_IFACE(COMREQ_REG, iface); + + priv->write_reg(priv, reg + 1, cmd); + priv->write_reg(priv, reg, obj); - while (count && priv->read_reg(priv, - C_CAN_IFACE(COMREQ_REG, iface)) & - IF_COMR_BUSY) { - count--; + for (cnt = MIN_TIMEOUT_VALUE; cnt; cnt--) { + if (!(priv->read_reg(priv, reg) & IF_COMR_BUSY)) + return; udelay(1); } + netdev_err(dev, "Updating object timed out\n"); - if (!count) - return 1; - - return 0; } -static inline void c_can_object_get(struct net_device *dev, - int iface, int objno, int mask) +static inline void c_can_object_get(struct net_device *dev, int iface, + u32 obj, u32 cmd) { - struct c_can_priv *priv = netdev_priv(dev); - - /* - * As per specs, after writting the message object number in the - * IF command request register the transfer b/w interface - * register and message RAM must be complete in 6 CAN-CLK - * period. - */ - priv->write_reg(priv, C_CAN_IFACE(COMMSK_REG, iface), - IFX_WRITE_LOW_16BIT(mask)); - priv->write_reg(priv, C_CAN_IFACE(COMREQ_REG, iface), - IFX_WRITE_LOW_16BIT(objno)); - - if (c_can_msg_obj_is_busy(priv, iface)) - netdev_err(dev, "timed out in object get\n"); + c_can_obj_update(dev, iface, cmd, obj); } -static inline void c_can_object_put(struct net_device *dev, - int iface, int objno, int mask) +static inline void c_can_object_put(struct net_device *dev, int iface, + u32 obj, u32 cmd) { - struct c_can_priv *priv = netdev_priv(dev); - - /* - * As per specs, after writting the message object number in the - * IF command request register the transfer b/w interface - * register and message RAM must be complete in 6 CAN-CLK - * period. - */ - priv->write_reg(priv, C_CAN_IFACE(COMMSK_REG, iface), - (IF_COMM_WR | IFX_WRITE_LOW_16BIT(mask))); - priv->write_reg(priv, C_CAN_IFACE(COMREQ_REG, iface), - IFX_WRITE_LOW_16BIT(objno)); - - if (c_can_msg_obj_is_busy(priv, iface)) - netdev_err(dev, "timed out in object put\n"); + c_can_obj_update(dev, iface, cmd | IF_COMM_WR, obj); } static void c_can_write_msg_object(struct net_device *dev, -- cgit v1.2.1 From 23ef0a895dd3f115909ca70958aeb3d04f374b0d Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Fri, 11 Apr 2014 08:13:21 +0000 Subject: can: c_can: Cleanup c_can_write_msg_object() Remove the MASK from the TX transfer side. Make the code readable and get rid of the annoying IFX_WRITE_XXX_16BIT macros which are just obfuscating the code. Signed-off-by: Thomas Gleixner Tested-by: Alexander Stein Signed-off-by: Marc Kleine-Budde --- drivers/net/can/c_can/c_can.c | 49 +++++++++++++++++++++---------------------- drivers/net/can/c_can/c_can.h | 8 ------- 2 files changed, 24 insertions(+), 33 deletions(-) (limited to 'drivers') diff --git a/drivers/net/can/c_can/c_can.c b/drivers/net/can/c_can/c_can.c index c654efbcc527..7c60e6affe7a 100644 --- a/drivers/net/can/c_can/c_can.c +++ b/drivers/net/can/c_can/c_can.c @@ -113,9 +113,11 @@ #define IF_COMM_CLR_NEWDAT IF_COMM_TXRQST #define IF_COMM_DATAA BIT(1) #define IF_COMM_DATAB BIT(0) -#define IF_COMM_ALL (IF_COMM_MASK | IF_COMM_ARB | \ - IF_COMM_CONTROL | IF_COMM_TXRQST | \ - IF_COMM_DATAA | IF_COMM_DATAB) + +/* TX buffer setup */ +#define IF_COMM_TX (IF_COMM_ARB | IF_COMM_CONTROL | \ + IF_COMM_TXRQST | \ + IF_COMM_DATAA | IF_COMM_DATAB) /* For the low buffers we clear the interrupt bit, but keep newdat */ #define IF_COMM_RCV_LOW (IF_COMM_MASK | IF_COMM_ARB | \ @@ -152,6 +154,8 @@ #define IF_MCONT_RCV (IF_MCONT_RXIE | IF_MCONT_UMASK) #define IF_MCONT_RCV_EOB (IF_MCONT_RCV | IF_MCONT_EOB) +#define IF_MCONT_TX (IF_MCONT_TXIE | IF_MCONT_EOB) + /* * Use IF1 for RX and IF2 for TX */ @@ -290,40 +294,35 @@ static inline void c_can_object_put(struct net_device *dev, int iface, c_can_obj_update(dev, iface, cmd | IF_COMM_WR, obj); } -static void c_can_write_msg_object(struct net_device *dev, - int iface, struct can_frame *frame, int objno) +static void c_can_write_msg_object(struct net_device *dev, int iface, + struct can_frame *frame, int obj) { - int i; - u16 flags = 0; - unsigned int id; struct c_can_priv *priv = netdev_priv(dev); - - if (!(frame->can_id & CAN_RTR_FLAG)) - flags |= IF_ARB_TRANSMIT; + u16 ctrl = IF_MCONT_TX | frame->can_dlc; + u32 arb = IF_ARB_MSGVAL << 16; + int i; if (frame->can_id & CAN_EFF_FLAG) { - id = frame->can_id & CAN_EFF_MASK; - flags |= IF_ARB_MSGXTD; - } else - id = ((frame->can_id & CAN_SFF_MASK) << 18); + arb |= frame->can_id & CAN_EFF_MASK; + arb |= IF_ARB_MSGXTD << 16; + } else { + arb |= (frame->can_id & CAN_SFF_MASK) << 18; + } - flags |= IF_ARB_MSGVAL; + if (!(frame->can_id & CAN_RTR_FLAG)) + arb |= IF_ARB_TRANSMIT << 16; + + priv->write_reg(priv, C_CAN_IFACE(ARB1_REG, iface), arb); + priv->write_reg(priv, C_CAN_IFACE(ARB2_REG, iface), arb >> 16); - priv->write_reg(priv, C_CAN_IFACE(ARB1_REG, iface), - IFX_WRITE_LOW_16BIT(id)); - priv->write_reg(priv, C_CAN_IFACE(ARB2_REG, iface), flags | - IFX_WRITE_HIGH_16BIT(id)); + priv->write_reg(priv, C_CAN_IFACE(MSGCTRL_REG, iface), ctrl); for (i = 0; i < frame->can_dlc; i += 2) { priv->write_reg(priv, C_CAN_IFACE(DATA1_REG, iface) + i / 2, frame->data[i] | (frame->data[i + 1] << 8)); } - /* enable interrupt for this message object */ - priv->write_reg(priv, C_CAN_IFACE(MSGCTRL_REG, iface), - IF_MCONT_TXIE | IF_MCONT_TXRQST | IF_MCONT_EOB | - frame->can_dlc); - c_can_object_put(dev, iface, objno, IF_COMM_ALL); + c_can_object_put(dev, iface, obj, IF_COMM_TX); } static inline void c_can_activate_all_lower_rx_msg_obj(struct net_device *dev, diff --git a/drivers/net/can/c_can/c_can.h b/drivers/net/can/c_can/c_can.h index 792944c74b94..d9f59cc4fcb5 100644 --- a/drivers/net/can/c_can/c_can.h +++ b/drivers/net/can/c_can/c_can.h @@ -22,14 +22,6 @@ #ifndef C_CAN_H #define C_CAN_H -/* - * IFx register masks: - * allow easy operation on 16-bit registers when the - * argument is 32-bit instead - */ -#define IFX_WRITE_LOW_16BIT(x) ((x) & 0xFFFF) -#define IFX_WRITE_HIGH_16BIT(x) (((x) & 0xFFFF0000) >> 16) - /* message object split */ #define C_CAN_NO_OF_OBJECTS 32 #define C_CAN_MSG_OBJ_RX_NUM 16 -- cgit v1.2.1 From d48071be6cb94912cf3c3ac0b4d520438fab4778 Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Fri, 11 Apr 2014 08:13:21 +0000 Subject: can: c_can: Use proper u32 variables in c_can_write_msg_object() Instead of obfuscating the code by artificial 16 bit splits use the proper 32 bit assignments and split the result when writing to the interface. Signed-off-by: Thomas Gleixner Tested-by: Alexander Stein Signed-off-by: Marc Kleine-Budde --- drivers/net/can/c_can/c_can.c | 18 +++++++++--------- 1 file changed, 9 insertions(+), 9 deletions(-) (limited to 'drivers') diff --git a/drivers/net/can/c_can/c_can.c b/drivers/net/can/c_can/c_can.c index 7c60e6affe7a..61fde414bb1f 100644 --- a/drivers/net/can/c_can/c_can.c +++ b/drivers/net/can/c_can/c_can.c @@ -135,9 +135,9 @@ #define IF_COMM_INVAL (IF_COMM_ARB | IF_COMM_CONTROL) /* IFx arbitration */ -#define IF_ARB_MSGVAL BIT(15) -#define IF_ARB_MSGXTD BIT(14) -#define IF_ARB_TRANSMIT BIT(13) +#define IF_ARB_MSGVAL BIT(31) +#define IF_ARB_MSGXTD BIT(30) +#define IF_ARB_TRANSMIT BIT(29) /* IFx message control */ #define IF_MCONT_NEWDAT BIT(15) @@ -299,18 +299,18 @@ static void c_can_write_msg_object(struct net_device *dev, int iface, { struct c_can_priv *priv = netdev_priv(dev); u16 ctrl = IF_MCONT_TX | frame->can_dlc; - u32 arb = IF_ARB_MSGVAL << 16; + u32 arb = IF_ARB_MSGVAL; int i; if (frame->can_id & CAN_EFF_FLAG) { arb |= frame->can_id & CAN_EFF_MASK; - arb |= IF_ARB_MSGXTD << 16; + arb |= IF_ARB_MSGXTD; } else { arb |= (frame->can_id & CAN_SFF_MASK) << 18; } if (!(frame->can_id & CAN_RTR_FLAG)) - arb |= IF_ARB_TRANSMIT << 16; + arb |= IF_ARB_TRANSMIT; priv->write_reg(priv, C_CAN_IFACE(ARB1_REG, iface), arb); priv->write_reg(priv, C_CAN_IFACE(ARB2_REG, iface), arb >> 16); @@ -380,12 +380,12 @@ static int c_can_read_msg_object(struct net_device *dev, int iface, u32 ctrl) arb = priv->read_reg(priv, C_CAN_IFACE(ARB1_REG, iface)); arb |= priv->read_reg(priv, C_CAN_IFACE(ARB2_REG, iface)) << 16; - if (arb & (IF_ARB_MSGXTD << 16)) + if (arb & IF_ARB_MSGXTD) frame->can_id = (arb & CAN_EFF_MASK) | CAN_EFF_FLAG; else frame->can_id = (arb >> 18) & CAN_SFF_MASK; - if (arb & (IF_ARB_TRANSMIT << 16)) { + if (arb & IF_ARB_TRANSMIT) { frame->can_id |= CAN_RTR_FLAG; } else { int i, dreg = C_CAN_IFACE(DATA1_REG, iface); @@ -413,7 +413,7 @@ static void c_can_setup_receive_object(struct net_device *dev, int iface, priv->write_reg(priv, C_CAN_IFACE(MASK1_REG, iface), mask); priv->write_reg(priv, C_CAN_IFACE(MASK2_REG, iface), mask >> 16); - id |= IF_ARB_MSGVAL << 16; + id |= IF_ARB_MSGVAL; priv->write_reg(priv, C_CAN_IFACE(ARB1_REG, iface), id); priv->write_reg(priv, C_CAN_IFACE(ARB2_REG, iface), id >> 16); -- cgit v1.2.1 From 35bdafb576c5c0a06815e7a681571c3ab950ff7e Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Fri, 11 Apr 2014 08:13:22 +0000 Subject: can: c_can: Remove tx locking Mark suggested to use one IF for the softirq and the other for the xmit function to avoid the xmit lock. That requires to write the frame into the interface first, then handle the echo skb and store the dlc before committing the TX request to the message ram. We use an atomic to handle the active buffers instead of reading the MSGVAL register as thats way faster especially on PCH/x86. Suggested-by: Mark Signed-off-by: Thomas Gleixner Tested-by: Alexander Stein Signed-off-by: Marc Kleine-Budde --- drivers/net/can/c_can/c_can.c | 127 ++++++++++++++---------------------------- drivers/net/can/c_can/c_can.h | 8 +-- 2 files changed, 43 insertions(+), 92 deletions(-) (limited to 'drivers') diff --git a/drivers/net/can/c_can/c_can.c b/drivers/net/can/c_can/c_can.c index 61fde414bb1f..99d36bf1ba21 100644 --- a/drivers/net/can/c_can/c_can.c +++ b/drivers/net/can/c_can/c_can.c @@ -237,24 +237,6 @@ static inline void c_can_reset_ram(const struct c_can_priv *priv, bool enable) priv->raminit(priv, enable); } -static inline int get_tx_next_msg_obj(const struct c_can_priv *priv) -{ - return (priv->tx_next & C_CAN_NEXT_MSG_OBJ_MASK) + - C_CAN_MSG_OBJ_TX_FIRST; -} - -static inline int get_tx_echo_msg_obj(int txecho) -{ - return (txecho & C_CAN_NEXT_MSG_OBJ_MASK) + C_CAN_MSG_OBJ_TX_FIRST; -} - -static u32 c_can_read_reg32(struct c_can_priv *priv, enum reg index) -{ - u32 val = priv->read_reg(priv, index); - val |= ((u32) priv->read_reg(priv, index + 1)) << 16; - return val; -} - static void c_can_irq_control(struct c_can_priv *priv, bool enable) { u32 ctrl = priv->read_reg(priv, C_CAN_CTRL_REG) & ~CONTROL_IRQMSK; @@ -294,8 +276,8 @@ static inline void c_can_object_put(struct net_device *dev, int iface, c_can_obj_update(dev, iface, cmd | IF_COMM_WR, obj); } -static void c_can_write_msg_object(struct net_device *dev, int iface, - struct can_frame *frame, int obj) +static void c_can_setup_tx_object(struct net_device *dev, int iface, + struct can_frame *frame, int obj) { struct c_can_priv *priv = netdev_priv(dev); u16 ctrl = IF_MCONT_TX | frame->can_dlc; @@ -321,8 +303,6 @@ static void c_can_write_msg_object(struct net_device *dev, int iface, priv->write_reg(priv, C_CAN_IFACE(DATA1_REG, iface) + i / 2, frame->data[i] | (frame->data[i + 1] << 8)); } - - c_can_object_put(dev, iface, obj, IF_COMM_TX); } static inline void c_can_activate_all_lower_rx_msg_obj(struct net_device *dev, @@ -432,47 +412,38 @@ static void c_can_inval_msg_object(struct net_device *dev, int iface, int obj) c_can_object_put(dev, iface, obj, IF_COMM_INVAL); } -static inline int c_can_is_next_tx_obj_busy(struct c_can_priv *priv, int objno) -{ - int val = c_can_read_reg32(priv, C_CAN_TXRQST1_REG); - - /* - * as transmission request register's bit n-1 corresponds to - * message object n, we need to handle the same properly. - */ - if (val & (1 << (objno - 1))) - return 1; - - return 0; -} - static netdev_tx_t c_can_start_xmit(struct sk_buff *skb, - struct net_device *dev) + struct net_device *dev) { - u32 msg_obj_no; - struct c_can_priv *priv = netdev_priv(dev); struct can_frame *frame = (struct can_frame *)skb->data; + struct c_can_priv *priv = netdev_priv(dev); + u32 idx, obj; if (can_dropped_invalid_skb(dev, skb)) return NETDEV_TX_OK; - - spin_lock_bh(&priv->xmit_lock); - msg_obj_no = get_tx_next_msg_obj(priv); - - /* prepare message object for transmission */ - c_can_write_msg_object(dev, IF_TX, frame, msg_obj_no); - priv->dlc[msg_obj_no - C_CAN_MSG_OBJ_TX_FIRST] = frame->can_dlc; - can_put_echo_skb(skb, dev, msg_obj_no - C_CAN_MSG_OBJ_TX_FIRST); - /* - * we have to stop the queue in case of a wrap around or - * if the next TX message object is still in use + * This is not a FIFO. C/D_CAN sends out the buffers + * prioritized. The lowest buffer number wins. */ - priv->tx_next++; - if (c_can_is_next_tx_obj_busy(priv, get_tx_next_msg_obj(priv)) || - (priv->tx_next & C_CAN_NEXT_MSG_OBJ_MASK) == 0) + idx = fls(atomic_read(&priv->tx_active)); + obj = idx + C_CAN_MSG_OBJ_TX_FIRST; + + /* If this is the last buffer, stop the xmit queue */ + if (idx == C_CAN_MSG_OBJ_TX_NUM - 1) netif_stop_queue(dev); - spin_unlock_bh(&priv->xmit_lock); + /* + * Store the message in the interface so we can call + * can_put_echo_skb(). We must do this before we enable + * transmit as we might race against do_tx(). + */ + c_can_setup_tx_object(dev, IF_TX, frame, obj); + priv->dlc[idx] = frame->can_dlc; + can_put_echo_skb(skb, dev, idx); + + /* Update the active bits */ + atomic_add((1 << idx), &priv->tx_active); + /* Start transmission */ + c_can_object_put(dev, IF_TX, obj, IF_COMM_TX); return NETDEV_TX_OK; } @@ -589,6 +560,10 @@ static int c_can_chip_config(struct net_device *dev) /* set a `lec` value so that we can check for updates later */ priv->write_reg(priv, C_CAN_STS_REG, LEC_UNUSED); + /* Clear all internal status */ + atomic_set(&priv->tx_active, 0); + priv->rxmasked = 0; + /* set bittiming params */ return c_can_set_bittiming(dev); } @@ -609,10 +584,6 @@ static int c_can_start(struct net_device *dev) priv->can.state = CAN_STATE_ERROR_ACTIVE; - /* reset tx helper pointers and the rx mask */ - priv->tx_next = priv->tx_echo = 0; - priv->rxmasked = 0; - return 0; } @@ -671,42 +642,29 @@ static int c_can_get_berr_counter(const struct net_device *dev, return err; } -/* - * priv->tx_echo holds the number of the oldest can_frame put for - * transmission into the hardware, but not yet ACKed by the CAN tx - * complete IRQ. - * - * We iterate from priv->tx_echo to priv->tx_next and check if the - * packet has been transmitted, echo it back to the CAN framework. - * If we discover a not yet transmitted packet, stop looking for more. - */ static void c_can_do_tx(struct net_device *dev) { struct c_can_priv *priv = netdev_priv(dev); struct net_device_stats *stats = &dev->stats; - u32 val, obj, pkts = 0, bytes = 0; + u32 idx, obj, pkts = 0, bytes = 0, pend, clr; - spin_lock_bh(&priv->xmit_lock); + clr = pend = priv->read_reg(priv, C_CAN_INTPND2_REG); - for (; (priv->tx_next - priv->tx_echo) > 0; priv->tx_echo++) { - obj = get_tx_echo_msg_obj(priv->tx_echo); - val = c_can_read_reg32(priv, C_CAN_TXRQST1_REG); - - if (val & (1 << (obj - 1))) - break; - - can_get_echo_skb(dev, obj - C_CAN_MSG_OBJ_TX_FIRST); - bytes += priv->dlc[obj - C_CAN_MSG_OBJ_TX_FIRST]; + while ((idx = ffs(pend))) { + idx--; + pend &= ~(1 << idx); + obj = idx + C_CAN_MSG_OBJ_TX_FIRST; + c_can_inval_msg_object(dev, IF_RX, obj); + can_get_echo_skb(dev, idx); + bytes += priv->dlc[idx]; pkts++; - c_can_inval_msg_object(dev, IF_TX, obj); } - /* restart queue if wrap-up or if queue stalled on last pkt */ - if (((priv->tx_next & C_CAN_NEXT_MSG_OBJ_MASK) != 0) || - ((priv->tx_echo & C_CAN_NEXT_MSG_OBJ_MASK) == 0)) - netif_wake_queue(dev); + /* Clear the bits in the tx_active mask */ + atomic_sub(clr, &priv->tx_active); - spin_unlock_bh(&priv->xmit_lock); + if (clr & (1 << (C_CAN_MSG_OBJ_TX_NUM - 1))) + netif_wake_queue(dev); if (pkts) { stats->tx_bytes += bytes; @@ -1192,7 +1150,6 @@ struct net_device *alloc_c_can_dev(void) return NULL; priv = netdev_priv(dev); - spin_lock_init(&priv->xmit_lock); netif_napi_add(dev, &priv->napi, c_can_poll, C_CAN_NAPI_WEIGHT); priv->dev = dev; diff --git a/drivers/net/can/c_can/c_can.h b/drivers/net/can/c_can/c_can.h index d9f59cc4fcb5..a5f10a01e49f 100644 --- a/drivers/net/can/c_can/c_can.h +++ b/drivers/net/can/c_can/c_can.h @@ -37,8 +37,6 @@ #define C_CAN_MSG_OBJ_RX_SPLIT 9 #define C_CAN_MSG_RX_LOW_LAST (C_CAN_MSG_OBJ_RX_SPLIT - 1) - -#define C_CAN_NEXT_MSG_OBJ_MASK (C_CAN_MSG_OBJ_TX_NUM - 1) #define RECEIVE_OBJECT_BITS 0x0000ffff enum reg { @@ -175,16 +173,12 @@ struct c_can_priv { struct napi_struct napi; struct net_device *dev; struct device *device; - spinlock_t xmit_lock; - int tx_object; + atomic_t tx_active; int last_status; u16 (*read_reg) (struct c_can_priv *priv, enum reg index); void (*write_reg) (struct c_can_priv *priv, enum reg index, u16 val); void __iomem *base; const u16 *regs; - unsigned long irq_flags; /* for request_irq() */ - unsigned int tx_next; - unsigned int tx_echo; void *priv; /* for board-specific data */ enum c_can_dev_id type; u32 __iomem *raminit_ctrlreg; -- cgit v1.2.1 From 939415973fdfb2c16a474e2575ba2581b828ccac Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Fri, 11 Apr 2014 08:13:22 +0000 Subject: can: c_can: Speed up tx buffer invalidation It's suffcient to kill the TXIE bit in the message control register even if the documentation of C and D CAN says that it's not allowed to do that while MSGVAL is set. Reality tells a different story and this change gives us another 2% of CPU back for not waiting on I/O. Signed-off-by: Thomas Gleixner Tested-by: Alexander Stein Signed-off-by: Marc Kleine-Budde --- drivers/net/can/c_can/c_can.c | 54 +++++++++++++++++++++++++++++++------------ drivers/net/can/c_can/c_can.h | 1 + 2 files changed, 40 insertions(+), 15 deletions(-) (limited to 'drivers') diff --git a/drivers/net/can/c_can/c_can.c b/drivers/net/can/c_can/c_can.c index 99d36bf1ba21..a2ca820b5373 100644 --- a/drivers/net/can/c_can/c_can.c +++ b/drivers/net/can/c_can/c_can.c @@ -276,11 +276,34 @@ static inline void c_can_object_put(struct net_device *dev, int iface, c_can_obj_update(dev, iface, cmd | IF_COMM_WR, obj); } +/* + * Note: According to documentation clearing TXIE while MSGVAL is set + * is not allowed, but works nicely on C/DCAN. And that lowers the I/O + * load significantly. + */ +static void c_can_inval_tx_object(struct net_device *dev, int iface, int obj) +{ + struct c_can_priv *priv = netdev_priv(dev); + + priv->write_reg(priv, C_CAN_IFACE(MSGCTRL_REG, iface), 0); + c_can_object_put(dev, iface, obj, IF_COMM_INVAL); +} + +static void c_can_inval_msg_object(struct net_device *dev, int iface, int obj) +{ + struct c_can_priv *priv = netdev_priv(dev); + + priv->write_reg(priv, C_CAN_IFACE(ARB1_REG, iface), 0); + priv->write_reg(priv, C_CAN_IFACE(ARB2_REG, iface), 0); + c_can_inval_tx_object(dev, iface, obj); +} + static void c_can_setup_tx_object(struct net_device *dev, int iface, - struct can_frame *frame, int obj) + struct can_frame *frame, int idx) { struct c_can_priv *priv = netdev_priv(dev); u16 ctrl = IF_MCONT_TX | frame->can_dlc; + bool rtr = frame->can_id & CAN_RTR_FLAG; u32 arb = IF_ARB_MSGVAL; int i; @@ -291,9 +314,20 @@ static void c_can_setup_tx_object(struct net_device *dev, int iface, arb |= (frame->can_id & CAN_SFF_MASK) << 18; } - if (!(frame->can_id & CAN_RTR_FLAG)) + if (!rtr) arb |= IF_ARB_TRANSMIT; + /* + * If we change the DIR bit, we need to invalidate the buffer + * first, i.e. clear the MSGVAL flag in the arbiter. + */ + if (rtr != (bool)test_bit(idx, &priv->tx_dir)) { + u32 obj = idx + C_CAN_MSG_OBJ_TX_FIRST; + + c_can_inval_msg_object(dev, iface, obj); + change_bit(idx, &priv->tx_dir); + } + priv->write_reg(priv, C_CAN_IFACE(ARB1_REG, iface), arb); priv->write_reg(priv, C_CAN_IFACE(ARB2_REG, iface), arb >> 16); @@ -401,17 +435,6 @@ static void c_can_setup_receive_object(struct net_device *dev, int iface, c_can_object_put(dev, iface, obj, IF_COMM_RCV_SETUP); } -static void c_can_inval_msg_object(struct net_device *dev, int iface, int obj) -{ - struct c_can_priv *priv = netdev_priv(dev); - - priv->write_reg(priv, C_CAN_IFACE(ARB1_REG, iface), 0); - priv->write_reg(priv, C_CAN_IFACE(ARB2_REG, iface), 0); - priv->write_reg(priv, C_CAN_IFACE(MSGCTRL_REG, iface), 0); - - c_can_object_put(dev, iface, obj, IF_COMM_INVAL); -} - static netdev_tx_t c_can_start_xmit(struct sk_buff *skb, struct net_device *dev) { @@ -436,7 +459,7 @@ static netdev_tx_t c_can_start_xmit(struct sk_buff *skb, * can_put_echo_skb(). We must do this before we enable * transmit as we might race against do_tx(). */ - c_can_setup_tx_object(dev, IF_TX, frame, obj); + c_can_setup_tx_object(dev, IF_TX, frame, idx); priv->dlc[idx] = frame->can_dlc; can_put_echo_skb(skb, dev, idx); @@ -563,6 +586,7 @@ static int c_can_chip_config(struct net_device *dev) /* Clear all internal status */ atomic_set(&priv->tx_active, 0); priv->rxmasked = 0; + priv->tx_dir = 0; /* set bittiming params */ return c_can_set_bittiming(dev); @@ -654,7 +678,7 @@ static void c_can_do_tx(struct net_device *dev) idx--; pend &= ~(1 << idx); obj = idx + C_CAN_MSG_OBJ_TX_FIRST; - c_can_inval_msg_object(dev, IF_RX, obj); + c_can_inval_tx_object(dev, IF_RX, obj); can_get_echo_skb(dev, idx); bytes += priv->dlc[idx]; pkts++; diff --git a/drivers/net/can/c_can/c_can.h b/drivers/net/can/c_can/c_can.h index a5f10a01e49f..e7de2b9f26bb 100644 --- a/drivers/net/can/c_can/c_can.h +++ b/drivers/net/can/c_can/c_can.h @@ -174,6 +174,7 @@ struct c_can_priv { struct net_device *dev; struct device *device; atomic_t tx_active; + unsigned long tx_dir; int last_status; u16 (*read_reg) (struct c_can_priv *priv, enum reg index); void (*write_reg) (struct c_can_priv *priv, enum reg index, u16 val); -- cgit v1.2.1 From f323d7a1d2868c00b2604dca36ad82e8ecbe4270 Mon Sep 17 00:00:00 2001 From: Wolfram Sang Date: Thu, 17 Apr 2014 10:57:18 +0200 Subject: can: c_can: use proper type for 'instance' Commit 6439fbce1075 (can: c_can: fix error checking of priv->instance in probe()) found the warning but applied a suboptimal solution. Since, both pdev->id and of_alias_get_id() return integers, it makes sense to convert the variable to an integer and avoid the cast. Signed-off-by: Wolfram Sang Signed-off-by: Marc Kleine-Budde --- drivers/net/can/c_can/c_can.h | 2 +- drivers/net/can/c_can/c_can_platform.c | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/net/can/c_can/c_can.h b/drivers/net/can/c_can/c_can.h index e7de2b9f26bb..c56f1b1c11ca 100644 --- a/drivers/net/can/c_can/c_can.h +++ b/drivers/net/can/c_can/c_can.h @@ -183,7 +183,7 @@ struct c_can_priv { void *priv; /* for board-specific data */ enum c_can_dev_id type; u32 __iomem *raminit_ctrlreg; - unsigned int instance; + int instance; void (*raminit) (const struct c_can_priv *priv, bool enable); u32 comm_rcv_high; u32 rxmasked; diff --git a/drivers/net/can/c_can/c_can_platform.c b/drivers/net/can/c_can/c_can_platform.c index 806d92753427..1df0b322d1e4 100644 --- a/drivers/net/can/c_can/c_can_platform.c +++ b/drivers/net/can/c_can/c_can_platform.c @@ -222,7 +222,7 @@ static int c_can_plat_probe(struct platform_device *pdev) res = platform_get_resource(pdev, IORESOURCE_MEM, 1); priv->raminit_ctrlreg = devm_ioremap_resource(&pdev->dev, res); - if (IS_ERR(priv->raminit_ctrlreg) || (int)priv->instance < 0) + if (IS_ERR(priv->raminit_ctrlreg) || priv->instance < 0) dev_info(&pdev->dev, "control memory is not used for raminit\n"); else priv->raminit = c_can_hw_raminit; -- cgit v1.2.1 From 78c181bc8a75d3f0624eaf24aa8265d441990c8c Mon Sep 17 00:00:00 2001 From: Wolfgang Grandegger Date: Thu, 3 Apr 2014 20:41:24 +0200 Subject: can: c_can_pci: enable PCI bus master only for MSI Coverity complains that c_can_pci_probe() calls pci_enable_msi() without checking the result: CID 712278 (#1 of 1): Unchecked return value (CHECKED_RETURN) 3. check_return: Calling pci_enable_msi_block without checking return value (as is done elsewhere 88 out of 105 times). 88 pci_enable_msi(pdev); This is CID 712278. Signed-off-by: Wolfgang Grandegger Reported-by: Bjorn Helgaas Signed-off-by: Marc Kleine-Budde --- drivers/net/can/c_can/c_can_pci.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/net/can/c_can/c_can_pci.c b/drivers/net/can/c_can/c_can_pci.c index 1b7ff400711a..fe5f6303b584 100644 --- a/drivers/net/can/c_can/c_can_pci.c +++ b/drivers/net/can/c_can/c_can_pci.c @@ -84,8 +84,11 @@ static int c_can_pci_probe(struct pci_dev *pdev, goto out_disable_device; } - pci_set_master(pdev); - pci_enable_msi(pdev); + ret = pci_enable_msi(pdev); + if (!ret) { + dev_info(&pdev->dev, "MSI enabled\n"); + pci_set_master(pdev); + } addr = pci_iomap(pdev, 0, pci_resource_len(pdev, 0)); if (!addr) { -- cgit v1.2.1 From a9edcdedbd3d8f3ffcd7bdcab5812707a25e554e Mon Sep 17 00:00:00 2001 From: Oliver Hartkopp Date: Tue, 15 Apr 2014 19:30:00 +0200 Subject: can: sja1000_isa: add locking for indirect register access mode When accessing the SJA1000 controller registers in the indirect access mode, writing the register number and reading/writing the data has to be an atomic attempt. As the sja1000_isa driver is an old style driver with a fixed number of instances the locking variable depends on the same index like all the other configuration elements given on the module command line. As a positive side effect dev->dev_id is populated by the instance index, which was missing in 3e66d0138c05d9 ("can: populate netdev::dev_id for udev discrimination"). Reported-by: Marc Kleine-Budde Signed-off-by: Oliver Hartkopp Signed-off-by: Marc Kleine-Budde --- drivers/net/can/sja1000/sja1000_isa.c | 16 +++++++++++++--- 1 file changed, 13 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/net/can/sja1000/sja1000_isa.c b/drivers/net/can/sja1000/sja1000_isa.c index df136a2516c4..014695d7e6a3 100644 --- a/drivers/net/can/sja1000/sja1000_isa.c +++ b/drivers/net/can/sja1000/sja1000_isa.c @@ -46,6 +46,7 @@ static int clk[MAXDEV]; static unsigned char cdr[MAXDEV] = {[0 ... (MAXDEV - 1)] = 0xff}; static unsigned char ocr[MAXDEV] = {[0 ... (MAXDEV - 1)] = 0xff}; static int indirect[MAXDEV] = {[0 ... (MAXDEV - 1)] = -1}; +static spinlock_t indirect_lock[MAXDEV]; /* lock for indirect access mode */ module_param_array(port, ulong, NULL, S_IRUGO); MODULE_PARM_DESC(port, "I/O port number"); @@ -101,19 +102,26 @@ static void sja1000_isa_port_write_reg(const struct sja1000_priv *priv, static u8 sja1000_isa_port_read_reg_indirect(const struct sja1000_priv *priv, int reg) { - unsigned long base = (unsigned long)priv->reg_base; + unsigned long flags, base = (unsigned long)priv->reg_base; + u8 readval; + spin_lock_irqsave(&indirect_lock[priv->dev->dev_id], flags); outb(reg, base); - return inb(base + 1); + readval = inb(base + 1); + spin_unlock_irqrestore(&indirect_lock[priv->dev->dev_id], flags); + + return readval; } static void sja1000_isa_port_write_reg_indirect(const struct sja1000_priv *priv, int reg, u8 val) { - unsigned long base = (unsigned long)priv->reg_base; + unsigned long flags, base = (unsigned long)priv->reg_base; + spin_lock_irqsave(&indirect_lock[priv->dev->dev_id], flags); outb(reg, base); outb(val, base + 1); + spin_unlock_irqrestore(&indirect_lock[priv->dev->dev_id], flags); } static int sja1000_isa_probe(struct platform_device *pdev) @@ -169,6 +177,7 @@ static int sja1000_isa_probe(struct platform_device *pdev) if (iosize == SJA1000_IOSIZE_INDIRECT) { priv->read_reg = sja1000_isa_port_read_reg_indirect; priv->write_reg = sja1000_isa_port_write_reg_indirect; + spin_lock_init(&indirect_lock[idx]); } else { priv->read_reg = sja1000_isa_port_read_reg; priv->write_reg = sja1000_isa_port_write_reg; @@ -198,6 +207,7 @@ static int sja1000_isa_probe(struct platform_device *pdev) platform_set_drvdata(pdev, dev); SET_NETDEV_DEV(dev, &pdev->dev); + dev->dev_id = idx; err = register_sja1000dev(dev); if (err) { -- cgit v1.2.1 From d482443244b820f03a5a07d1bca6a0f5e2b4804c Mon Sep 17 00:00:00 2001 From: Oliver Hartkopp Date: Wed, 23 Apr 2014 22:10:55 +0200 Subject: can: fix return value from can_get_bittiming() When trying to set a data bitrate on non CAN FD devices the 'ip' tool answers with: RTNETLINK answers: Unknown error 524 Rename '-ENOTSUPP' to '-EOPNOTSUPP' so that 'ip' answers correctly: RTNETLINK answers: Operation not supported Signed-off-by: Oliver Hartkopp Signed-off-by: Marc Kleine-Budde --- drivers/net/can/dev.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/can/dev.c b/drivers/net/can/dev.c index c7a260478749..e318e87e2bfc 100644 --- a/drivers/net/can/dev.c +++ b/drivers/net/can/dev.c @@ -256,7 +256,7 @@ static int can_get_bittiming(struct net_device *dev, struct can_bittiming *bt, /* Check if the CAN device has bit-timing parameters */ if (!btc) - return -ENOTSUPP; + return -EOPNOTSUPP; /* * Depending on the given can_bittiming parameter structure the CAN -- cgit v1.2.1 From 367525c8c20a34560afe1d0c7cca52a44ccd62e9 Mon Sep 17 00:00:00 2001 From: Alexander Stein Date: Tue, 15 Apr 2014 16:51:04 +0200 Subject: can: slcan: Fix spinlock variant slc_xmit is called within softirq context and locks sl->lock, but slcan_write_wakeup is not softirq context, so we need to use spin_[un]lock_bh! Detected using kernel lock debugging mechanism. Signed-off-by: Alexander Stein Acked-by: Oliver Hartkopp Signed-off-by: Marc Kleine-Budde --- drivers/net/can/slcan.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/net/can/slcan.c b/drivers/net/can/slcan.c index f5b16e0e3a12..dcf9196f6316 100644 --- a/drivers/net/can/slcan.c +++ b/drivers/net/can/slcan.c @@ -322,13 +322,13 @@ static void slcan_write_wakeup(struct tty_struct *tty) if (!sl || sl->magic != SLCAN_MAGIC || !netif_running(sl->dev)) return; - spin_lock(&sl->lock); + spin_lock_bh(&sl->lock); if (sl->xleft <= 0) { /* Now serial buffer is almost free & we can start * transmission of another packet */ sl->dev->stats.tx_packets++; clear_bit(TTY_DO_WRITE_WAKEUP, &tty->flags); - spin_unlock(&sl->lock); + spin_unlock_bh(&sl->lock); netif_wake_queue(sl->dev); return; } @@ -336,7 +336,7 @@ static void slcan_write_wakeup(struct tty_struct *tty) actual = tty->ops->write(tty, sl->xhead, sl->xleft); sl->xleft -= actual; sl->xhead += actual; - spin_unlock(&sl->lock); + spin_unlock_bh(&sl->lock); } /* Send a can_frame to a TTY queue. */ -- cgit v1.2.1 From 9ec36cafe43bf835f8f29273597a5b0cbc8267ef Mon Sep 17 00:00:00 2001 From: Rob Herring Date: Wed, 23 Apr 2014 17:57:41 -0500 Subject: of/irq: do irq resolution in platform_get_irq Currently we get the following kind of errors if we try to use interrupt phandles to irqchips that have not yet initialized: irq: no irq domain found for /ocp/pinmux@48002030 ! ------------[ cut here ]------------ WARNING: CPU: 0 PID: 1 at drivers/of/platform.c:171 of_device_alloc+0x144/0x184() Modules linked in: CPU: 0 PID: 1 Comm: swapper/0 Not tainted 3.12.0-00038-g42a9708 #1012 (show_stack+0x14/0x1c) (dump_stack+0x6c/0xa0) (warn_slowpath_common+0x64/0x84) (warn_slowpath_null+0x1c/0x24) (of_device_alloc+0x144/0x184) (of_platform_device_create_pdata+0x44/0x9c) (of_platform_bus_create+0xd0/0x170) (of_platform_bus_create+0x12c/0x170) (of_platform_populate+0x60/0x98) This is because we're wrongly trying to populate resources that are not yet available. It's perfectly valid to create irqchips dynamically, so let's fix up the issue by resolving the interrupt resources when platform_get_irq is called. And then we also need to accept the fact that some irqdomains do not exist that early on, and only get initialized later on. So we can make the current WARN_ON into just into a pr_debug(). We still attempt to populate irq resources when we create the devices. This allows current drivers which don't use platform_get_irq to continue to function. Once all drivers are fixed, this code can be removed. Suggested-by: Russell King Signed-off-by: Rob Herring Signed-off-by: Tony Lindgren Tested-by: Tony Lindgren Cc: stable@vger.kernel.org # v3.10+ Signed-off-by: Grant Likely --- drivers/base/platform.c | 7 ++++++- drivers/of/irq.c | 26 ++++++++++++++++++++++++++ drivers/of/platform.c | 4 +++- 3 files changed, 35 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/base/platform.c b/drivers/base/platform.c index e714709704e4..5b47210889e0 100644 --- a/drivers/base/platform.c +++ b/drivers/base/platform.c @@ -13,6 +13,7 @@ #include #include #include +#include #include #include #include @@ -87,7 +88,11 @@ int platform_get_irq(struct platform_device *dev, unsigned int num) return -ENXIO; return dev->archdata.irqs[num]; #else - struct resource *r = platform_get_resource(dev, IORESOURCE_IRQ, num); + struct resource *r; + if (IS_ENABLED(CONFIG_OF_IRQ) && dev->dev.of_node) + return of_irq_get(dev->dev.of_node, num); + + r = platform_get_resource(dev, IORESOURCE_IRQ, num); return r ? r->start : -ENXIO; #endif diff --git a/drivers/of/irq.c b/drivers/of/irq.c index e2e4c548a42f..5aeb89411350 100644 --- a/drivers/of/irq.c +++ b/drivers/of/irq.c @@ -379,6 +379,32 @@ int of_irq_to_resource(struct device_node *dev, int index, struct resource *r) } EXPORT_SYMBOL_GPL(of_irq_to_resource); +/** + * of_irq_get - Decode a node's IRQ and return it as a Linux irq number + * @dev: pointer to device tree node + * @index: zero-based index of the irq + * + * Returns Linux irq number on success, or -EPROBE_DEFER if the irq domain + * is not yet created. + * + */ +int of_irq_get(struct device_node *dev, int index) +{ + int rc; + struct of_phandle_args oirq; + struct irq_domain *domain; + + rc = of_irq_parse_one(dev, index, &oirq); + if (rc) + return rc; + + domain = irq_find_host(oirq.np); + if (!domain) + return -EPROBE_DEFER; + + return irq_create_of_mapping(&oirq); +} + /** * of_irq_count - Count the number of IRQs a node uses * @dev: pointer to device tree node diff --git a/drivers/of/platform.c b/drivers/of/platform.c index 404d1daebefa..bd47fbc53dc9 100644 --- a/drivers/of/platform.c +++ b/drivers/of/platform.c @@ -168,7 +168,9 @@ struct platform_device *of_device_alloc(struct device_node *np, rc = of_address_to_resource(np, i, res); WARN_ON(rc); } - WARN_ON(of_irq_to_resource_table(np, res, num_irq) != num_irq); + if (of_irq_to_resource_table(np, res, num_irq) != num_irq) + pr_debug("not all legacy IRQ resources mapped for %s\n", + np->name); } dev->dev.of_node = of_node_get(np); -- cgit v1.2.1 From 6a20dbd6caa2358716136144bf524331d70b1e03 Mon Sep 17 00:00:00 2001 From: Manfred Schlaegl Date: Tue, 8 Apr 2014 14:42:04 +0200 Subject: tty: Fix race condition between __tty_buffer_request_room and flush_to_ldisc The race was introduced while development of linux-3.11 by e8437d7ecbc50198705331449367d401ebb3181f and e9975fdec0138f1b2a85b9624e41660abd9865d4. Originally it was found and reproduced on linux-3.12.15 and linux-3.12.15-rt25, by sending 500 byte blocks with 115kbaud to the target uart in a loop with 100 milliseconds delay. In short: 1. The consumer flush_to_ldisc is on to remove the head tty_buffer. 2. The producer adds a number of bytes, so that a new tty_buffer must be allocated and added by __tty_buffer_request_room. 3. The consumer removes the head tty_buffer element, without handling newly committed data. Detailed example: * Initial buffer: * Head, Tail -> 0: used=250; commit=250; read=240; next=NULL * Consumer: ''flush_to_ldisc'' * consumed 10 Byte * buffer: * Head, Tail -> 0: used=250; commit=250; read=250; next=NULL {{{ count = head->commit - head->read; // count = 0 if (!count) { // enter // INTERRUPTED BY PRODUCER -> if (head->next == NULL) break; buf->head = head->next; tty_buffer_free(port, head); continue; } }}} * Producer: tty_insert_flip_... 10 bytes + tty_flip_buffer_push * buffer: * Head, Tail -> 0: used=250; commit=250; read=250; next=NULL * added 6 bytes: head-element filled to maximum. * buffer: * Head, Tail -> 0: used=256; commit=250; read=250; next=NULL * added 4 bytes: __tty_buffer_request_room is called * buffer: * Head -> 0: used=256; commit=256; read=250; next=1 * Tail -> 1: used=4; commit=0; read=250 next=NULL * push (tty_flip_buffer_push) * buffer: * Head -> 0: used=256; commit=256; read=250; next=1 * Tail -> 1: used=4; commit=4; read=250 next=NULL * Consumer {{{ count = head->commit - head->read; if (!count) { // INTERRUPTED BY PRODUCER <- if (head->next == NULL) // -> no break break; buf->head = head->next; tty_buffer_free(port, head); // ERROR: tty_buffer head freed -> 6 bytes lost continue; } }}} This patch reintroduces a spin_lock to protect this case. Perhaps later a lock-less solution could be found. Signed-off-by: Manfred Schlaegl Cc: stable # 3.11 Signed-off-by: Greg Kroah-Hartman --- drivers/tty/tty_buffer.c | 16 ++++++++++++++-- 1 file changed, 14 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/tty/tty_buffer.c b/drivers/tty/tty_buffer.c index 8ebd9f88a6f6..f1d30f6945af 100644 --- a/drivers/tty/tty_buffer.c +++ b/drivers/tty/tty_buffer.c @@ -255,11 +255,16 @@ static int __tty_buffer_request_room(struct tty_port *port, size_t size, if (change || left < size) { /* This is the slow path - looking for new buffers to use */ if ((n = tty_buffer_alloc(port, size)) != NULL) { + unsigned long iflags; + n->flags = flags; buf->tail = n; + + spin_lock_irqsave(&buf->flush_lock, iflags); b->commit = b->used; - smp_mb(); b->next = n; + spin_unlock_irqrestore(&buf->flush_lock, iflags); + } else if (change) size = 0; else @@ -443,6 +448,7 @@ static void flush_to_ldisc(struct work_struct *work) mutex_lock(&buf->lock); while (1) { + unsigned long flags; struct tty_buffer *head = buf->head; int count; @@ -450,14 +456,19 @@ static void flush_to_ldisc(struct work_struct *work) if (atomic_read(&buf->priority)) break; + spin_lock_irqsave(&buf->flush_lock, flags); count = head->commit - head->read; if (!count) { - if (head->next == NULL) + if (head->next == NULL) { + spin_unlock_irqrestore(&buf->flush_lock, flags); break; + } buf->head = head->next; + spin_unlock_irqrestore(&buf->flush_lock, flags); tty_buffer_free(port, head); continue; } + spin_unlock_irqrestore(&buf->flush_lock, flags); count = receive_buf(tty, head, count); if (!count) @@ -512,6 +523,7 @@ void tty_buffer_init(struct tty_port *port) struct tty_bufhead *buf = &port->buf; mutex_init(&buf->lock); + spin_lock_init(&buf->flush_lock); tty_buffer_reset(&buf->sentinel, 0); buf->head = &buf->sentinel; buf->tail = &buf->sentinel; -- cgit v1.2.1 From b08c9c317e3f7764a91d522cd031639ba42b98cc Mon Sep 17 00:00:00 2001 From: Loic Poulain Date: Thu, 24 Apr 2014 11:38:56 +0200 Subject: 8250_core: Fix unwanted TX chars write On transmit-hold-register empty, serial8250_tx_chars should be called only if we don't use DMA. DMA has its own tx cycle. Signed-off-by: Loic Poulain Reviewed-by: Heikki Krogerus Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/8250/8250_core.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/tty/serial/8250/8250_core.c b/drivers/tty/serial/8250/8250_core.c index 81f909c2101f..0e1bf8858431 100644 --- a/drivers/tty/serial/8250/8250_core.c +++ b/drivers/tty/serial/8250/8250_core.c @@ -1520,7 +1520,7 @@ int serial8250_handle_irq(struct uart_port *port, unsigned int iir) status = serial8250_rx_chars(up, status); } serial8250_modem_status(up); - if (status & UART_LSR_THRE) + if (!up->dma && (status & UART_LSR_THRE)) serial8250_tx_chars(up); spin_unlock_irqrestore(&port->lock, flags); -- cgit v1.2.1 From f8fd1b0350d3a4581125f5eda6528f5a2c5f9183 Mon Sep 17 00:00:00 2001 From: Loic Poulain Date: Thu, 24 Apr 2014 11:34:48 +0200 Subject: serial: 8250: Fix thread unsafe __dma_tx_complete function __dma_tx_complete is not protected against concurrent call of serial8250_tx_dma. it can lead to circular tail index corruption or parallel call of serial_tx_dma on the same data portion. This patch fixes this issue by holding the port lock. Signed-off-by: Loic Poulain Reviewed-by: Heikki Krogerus Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/8250/8250_dma.c | 9 +++++++-- 1 file changed, 7 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/tty/serial/8250/8250_dma.c b/drivers/tty/serial/8250/8250_dma.c index 7046769608d4..ab9096dc3849 100644 --- a/drivers/tty/serial/8250/8250_dma.c +++ b/drivers/tty/serial/8250/8250_dma.c @@ -20,12 +20,15 @@ static void __dma_tx_complete(void *param) struct uart_8250_port *p = param; struct uart_8250_dma *dma = p->dma; struct circ_buf *xmit = &p->port.state->xmit; - - dma->tx_running = 0; + unsigned long flags; dma_sync_single_for_cpu(dma->txchan->device->dev, dma->tx_addr, UART_XMIT_SIZE, DMA_TO_DEVICE); + spin_lock_irqsave(&p->port.lock, flags); + + dma->tx_running = 0; + xmit->tail += dma->tx_size; xmit->tail &= UART_XMIT_SIZE - 1; p->port.icount.tx += dma->tx_size; @@ -35,6 +38,8 @@ static void __dma_tx_complete(void *param) if (!uart_circ_empty(xmit) && !uart_tx_stopped(&p->port)) serial8250_tx_dma(p); + + spin_unlock_irqrestore(&p->port.lock, flags); } static void __dma_rx_complete(void *param) -- cgit v1.2.1 From bb7f09ba961dd43a2398975cc2d4ad0eb77ec865 Mon Sep 17 00:00:00 2001 From: Doug Anderson Date: Mon, 21 Apr 2014 09:40:34 -0700 Subject: serial: samsung: Use the passed in "port", fixing kgdb w/ no console The two functions in the samsung serial driver used for writing characters out to the port were inconsistent about whether they used the passed in "port" or the global "cons_uart". There was no reason to use the global and the use of the global in s3c24xx_serial_put_poll_char() caused a crash in the case where you used the serial port for kgdboc but not for console. Fix it so we used the passed in variable. Note that this doesn't fix all problems with the samsung serial driver. Specifically: * s3c24xx_serial_console_putchar() is still 99% identical to s3c24xx_serial_put_poll_char() (the function signature is different, but that's about it). A future patch will make them slightly less identical and judging by other serial drivers we may need yet more differences eventually. * The samsung serial driver still doesn't allow you to have more than one console port since it still uses the global cons_uart in s3c24xx_serial_console_write(). Signed-off-by: Doug Anderson Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/samsung.c | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) (limited to 'drivers') diff --git a/drivers/tty/serial/samsung.c b/drivers/tty/serial/samsung.c index 23f459600738..a8e8b796f4f7 100644 --- a/drivers/tty/serial/samsung.c +++ b/drivers/tty/serial/samsung.c @@ -1446,8 +1446,8 @@ static int s3c24xx_serial_get_poll_char(struct uart_port *port) static void s3c24xx_serial_put_poll_char(struct uart_port *port, unsigned char c) { - unsigned int ufcon = rd_regl(cons_uart, S3C2410_UFCON); - unsigned int ucon = rd_regl(cons_uart, S3C2410_UCON); + unsigned int ufcon = rd_regl(port, S3C2410_UFCON); + unsigned int ucon = rd_regl(port, S3C2410_UCON); /* not possible to xmit on unconfigured port */ if (!s3c24xx_port_configured(ucon)) @@ -1455,7 +1455,7 @@ static void s3c24xx_serial_put_poll_char(struct uart_port *port, while (!s3c24xx_serial_console_txrdy(port, ufcon)) cpu_relax(); - wr_regb(cons_uart, S3C2410_UTXH, c); + wr_regb(port, S3C2410_UTXH, c); } #endif /* CONFIG_CONSOLE_POLL */ @@ -1463,8 +1463,8 @@ static void s3c24xx_serial_put_poll_char(struct uart_port *port, static void s3c24xx_serial_console_putchar(struct uart_port *port, int ch) { - unsigned int ufcon = rd_regl(cons_uart, S3C2410_UFCON); - unsigned int ucon = rd_regl(cons_uart, S3C2410_UCON); + unsigned int ufcon = rd_regl(port, S3C2410_UFCON); + unsigned int ucon = rd_regl(port, S3C2410_UCON); /* not possible to xmit on unconfigured port */ if (!s3c24xx_port_configured(ucon)) @@ -1472,7 +1472,7 @@ s3c24xx_serial_console_putchar(struct uart_port *port, int ch) while (!s3c24xx_serial_console_txrdy(port, ufcon)) barrier(); - wr_regb(cons_uart, S3C2410_UTXH, ch); + wr_regb(port, S3C2410_UTXH, ch); } static void -- cgit v1.2.1 From ab88c8dc3bd667bcf21c8319165db92b930cf7e7 Mon Sep 17 00:00:00 2001 From: Doug Anderson Date: Mon, 21 Apr 2014 09:40:35 -0700 Subject: serial: samsung: don't check config for every character The s3c24xx_serial_console_putchar() is _only_ ever used by s3c24xx_serial_console_write() and is called in a loop (indirectly through uart_console_write()). There's no reason to call s3c24xx_port_configured() for every iteration through the loop. Move it outside the loop. Signed-off-by: Doug Anderson Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/samsung.c | 11 ++++++----- 1 file changed, 6 insertions(+), 5 deletions(-) (limited to 'drivers') diff --git a/drivers/tty/serial/samsung.c b/drivers/tty/serial/samsung.c index a8e8b796f4f7..12442748d69f 100644 --- a/drivers/tty/serial/samsung.c +++ b/drivers/tty/serial/samsung.c @@ -1464,11 +1464,6 @@ static void s3c24xx_serial_console_putchar(struct uart_port *port, int ch) { unsigned int ufcon = rd_regl(port, S3C2410_UFCON); - unsigned int ucon = rd_regl(port, S3C2410_UCON); - - /* not possible to xmit on unconfigured port */ - if (!s3c24xx_port_configured(ucon)) - return; while (!s3c24xx_serial_console_txrdy(port, ufcon)) barrier(); @@ -1479,6 +1474,12 @@ static void s3c24xx_serial_console_write(struct console *co, const char *s, unsigned int count) { + unsigned int ucon = rd_regl(cons_uart, S3C2410_UCON); + + /* not possible to xmit on unconfigured port */ + if (!s3c24xx_port_configured(ucon)) + return; + uart_console_write(cons_uart, s, count, s3c24xx_serial_console_putchar); } -- cgit v1.2.1 From f94b0572683716f727b25086f8d39671506593ab Mon Sep 17 00:00:00 2001 From: Doug Anderson Date: Mon, 21 Apr 2014 09:40:36 -0700 Subject: serial: samsung: Change barrier() to cpu_relax() in console output The two functions to write out to the console (one used in normal console mode and one in polling console mode) were slightly different. One used a barrier() in its loop and the other a cpu_relax(). The barrier() really doesn't do anything since we're using rd_regl() to read the port anyway. Switch it to cpu_relax() to make things consistent. No known bugs / issues are fixed by this change--it just makes things more consistent. Signed-off-by: Doug Anderson Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/samsung.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/tty/serial/samsung.c b/drivers/tty/serial/samsung.c index 12442748d69f..1f5505e7f90d 100644 --- a/drivers/tty/serial/samsung.c +++ b/drivers/tty/serial/samsung.c @@ -1466,7 +1466,7 @@ s3c24xx_serial_console_putchar(struct uart_port *port, int ch) unsigned int ufcon = rd_regl(port, S3C2410_UFCON); while (!s3c24xx_serial_console_txrdy(port, ufcon)) - barrier(); + cpu_relax(); wr_regb(port, S3C2410_UTXH, ch); } -- cgit v1.2.1 From 7deb39ed8d9494ea541bcaa69b56036a94f79dc2 Mon Sep 17 00:00:00 2001 From: Thomas Pfaff Date: Wed, 23 Apr 2014 12:33:22 +0200 Subject: serial_core: fix uart PORT_UNKNOWN handling While porting a RS485 driver from 2.6.29 to 3.14, i noticed that the serial tty driver could break it by using uart ports that it does not own : 1. uart_change_pm ist called during uart_open and calls the uart pm function without checking for PORT_UNKNOWN. The fix is to move uart_change_pm from uart_open to uart_port_startup. 2. The return code from the uart request_port call in uart_set_info is not handled properly, leading to the situation that the serial driver also thinks it owns the uart ports. This can triggered by doing following actions : setserial /dev/ttyS0 uart none # release the uart ports modprobe lirc-serial # or any other device that uses the uart setserial /dev/ttyS0 uart 16550 # gives no error and the uart tty driver # can use the ports as well Signed-off-by: Thomas Pfaff Reviewed-by: Alan Cox Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/serial_core.c | 39 +++++++++++++++++++++------------------ 1 file changed, 21 insertions(+), 18 deletions(-) (limited to 'drivers') diff --git a/drivers/tty/serial/serial_core.c b/drivers/tty/serial/serial_core.c index f26834d262b3..b68550d95a40 100644 --- a/drivers/tty/serial/serial_core.c +++ b/drivers/tty/serial/serial_core.c @@ -136,6 +136,11 @@ static int uart_port_startup(struct tty_struct *tty, struct uart_state *state, if (uport->type == PORT_UNKNOWN) return 1; + /* + * Make sure the device is in D0 state. + */ + uart_change_pm(state, UART_PM_STATE_ON); + /* * Initialise and allocate the transmit and temporary * buffer. @@ -825,25 +830,29 @@ static int uart_set_info(struct tty_struct *tty, struct tty_port *port, * If we fail to request resources for the * new port, try to restore the old settings. */ - if (retval && old_type != PORT_UNKNOWN) { + if (retval) { uport->iobase = old_iobase; uport->type = old_type; uport->hub6 = old_hub6; uport->iotype = old_iotype; uport->regshift = old_shift; uport->mapbase = old_mapbase; - retval = uport->ops->request_port(uport); - /* - * If we failed to restore the old settings, - * we fail like this. - */ - if (retval) - uport->type = PORT_UNKNOWN; - /* - * We failed anyway. - */ - retval = -EBUSY; + if (old_type != PORT_UNKNOWN) { + retval = uport->ops->request_port(uport); + /* + * If we failed to restore the old settings, + * we fail like this. + */ + if (retval) + uport->type = PORT_UNKNOWN; + + /* + * We failed anyway. + */ + retval = -EBUSY; + } + /* Added to return the correct error -Ram Gupta */ goto exit; } @@ -1570,12 +1579,6 @@ static int uart_open(struct tty_struct *tty, struct file *filp) goto err_dec_count; } - /* - * Make sure the device is in D0 state. - */ - if (port->count == 1) - uart_change_pm(state, UART_PM_STATE_ON); - /* * Start up the serial port. */ -- cgit v1.2.1 From 8c7ae357cc5b6bd037ad2d666e9f3789cf882925 Mon Sep 17 00:00:00 2001 From: Rajkumar Manoharan Date: Wed, 23 Apr 2014 15:07:57 +0530 Subject: ath9k: fix race in setting ATH_OP_INVALID The commit "ath9k: move sc_flags to ath_common" moved setting ATH_OP_INVALID flag below ieee80211_register_hw. This is causing the flag never being cleared randomly as the drv_start is called prior to setting flag. Fix this by setting the flag prior to register_hw. Signed-off-by: Rajkumar Manoharan Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ath9k/ahb.c | 4 ---- drivers/net/wireless/ath/ath9k/init.c | 3 +++ drivers/net/wireless/ath/ath9k/pci.c | 5 ----- 3 files changed, 3 insertions(+), 9 deletions(-) (limited to 'drivers') diff --git a/drivers/net/wireless/ath/ath9k/ahb.c b/drivers/net/wireless/ath/ath9k/ahb.c index a0398fe3eb28..be3eb2a8d602 100644 --- a/drivers/net/wireless/ath/ath9k/ahb.c +++ b/drivers/net/wireless/ath/ath9k/ahb.c @@ -86,7 +86,6 @@ static int ath_ahb_probe(struct platform_device *pdev) int irq; int ret = 0; struct ath_hw *ah; - struct ath_common *common; char hw_name[64]; if (!dev_get_platdata(&pdev->dev)) { @@ -146,9 +145,6 @@ static int ath_ahb_probe(struct platform_device *pdev) wiphy_info(hw->wiphy, "%s mem=0x%lx, irq=%d\n", hw_name, (unsigned long)mem, irq); - common = ath9k_hw_common(sc->sc_ah); - /* Will be cleared in ath9k_start() */ - set_bit(ATH_OP_INVALID, &common->op_flags); return 0; err_irq: diff --git a/drivers/net/wireless/ath/ath9k/init.c b/drivers/net/wireless/ath/ath9k/init.c index cbbb02a6b13b..36ae6490e554 100644 --- a/drivers/net/wireless/ath/ath9k/init.c +++ b/drivers/net/wireless/ath/ath9k/init.c @@ -783,6 +783,9 @@ int ath9k_init_device(u16 devid, struct ath_softc *sc, common = ath9k_hw_common(ah); ath9k_set_hw_capab(sc, hw); + /* Will be cleared in ath9k_start() */ + set_bit(ATH_OP_INVALID, &common->op_flags); + /* Initialize regulatory */ error = ath_regd_init(&common->regulatory, sc->hw->wiphy, ath9k_reg_notifier); diff --git a/drivers/net/wireless/ath/ath9k/pci.c b/drivers/net/wireless/ath/ath9k/pci.c index 25304adece57..914dbc6b1720 100644 --- a/drivers/net/wireless/ath/ath9k/pci.c +++ b/drivers/net/wireless/ath/ath9k/pci.c @@ -784,7 +784,6 @@ static int ath_pci_probe(struct pci_dev *pdev, const struct pci_device_id *id) { struct ath_softc *sc; struct ieee80211_hw *hw; - struct ath_common *common; u8 csz; u32 val; int ret = 0; @@ -877,10 +876,6 @@ static int ath_pci_probe(struct pci_dev *pdev, const struct pci_device_id *id) wiphy_info(hw->wiphy, "%s mem=0x%lx, irq=%d\n", hw_name, (unsigned long)sc->mem, pdev->irq); - /* Will be cleared in ath9k_start() */ - common = ath9k_hw_common(sc->sc_ah); - set_bit(ATH_OP_INVALID, &common->op_flags); - return 0; err_init: -- cgit v1.2.1 From ffa216bb5eecfce0f01b0b2a95d5c320dde90005 Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Wed, 23 Apr 2014 12:20:55 +0200 Subject: brcmfmac: Fix brcmf_chip_ai_coredisable not applying reset bits to BCMA_IOCTL brcmfmac has been broken on my cubietruck with a BCM43362: brcmfmac: brcmf_chip_recognition: found AXI chip: BCM43362, rev=1 brcmfmac: brcmf_c_preinit_dcmds: Firmware version = wl0: Apr 22 2013 14:50:00 version 5.90.195.89.6 FWID 01-b30a427d since commit 53036261033: "brcmfmac: update core reset and disable routines". The problem is that since this commit brcmf_chip_ai_resetcore no longer sets BCMA_IOCTL itself before bringing the core out of reset, instead relying on brcmf_chip_ai_coredisable to do so. But brcmf_chip_ai_coredisable is a nop of the chip is already in reset. This patch modifies brcmf_chip_ai_coredisable to always set BCMA_IOCTL even if the core is already in reset. This fixes brcmfmac hanging in firmware loading on my board. Cc: stable@vger.kernel.org # v3.14 Signed-off-by: Hans de Goede Acked-by: Arend van Spriel Signed-off-by: John W. Linville --- drivers/net/wireless/brcm80211/brcmfmac/chip.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/net/wireless/brcm80211/brcmfmac/chip.c b/drivers/net/wireless/brcm80211/brcmfmac/chip.c index df130ef53d1c..c7c9f15c0fe0 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/chip.c +++ b/drivers/net/wireless/brcm80211/brcmfmac/chip.c @@ -303,10 +303,10 @@ static void brcmf_chip_ai_coredisable(struct brcmf_core_priv *core, ci = core->chip; - /* if core is already in reset, just return */ + /* if core is already in reset, skip reset */ regdata = ci->ops->read32(ci->ctx, core->wrapbase + BCMA_RESET_CTL); if ((regdata & BCMA_RESET_CTL_RESET) != 0) - return; + goto in_reset_configure; /* configure reset */ ci->ops->write32(ci->ctx, core->wrapbase + BCMA_IOCTL, @@ -322,6 +322,7 @@ static void brcmf_chip_ai_coredisable(struct brcmf_core_priv *core, SPINWAIT(ci->ops->read32(ci->ctx, core->wrapbase + BCMA_RESET_CTL) != BCMA_RESET_CTL_RESET, 300); +in_reset_configure: /* in-reset configure */ ci->ops->write32(ci->ctx, core->wrapbase + BCMA_IOCTL, reset | BCMA_IOCTL_FGC | BCMA_IOCTL_CLK); -- cgit v1.2.1 From 3d725caa9dcc78c3dc9e7ea0c04f626468edd9c9 Mon Sep 17 00:00:00 2001 From: Sheng-Liang Song Date: Thu, 24 Apr 2014 16:28:29 -0700 Subject: Input: atkbd - fix keyboard not working on some LG laptops After issuing ATKBD_CMD_RESET_DIS, keyboard on some LG laptops stops working. The workaround is to stop issuing ATKBD_CMD_RESET_DIS commands. In order to keep changes in atkbd driver to the minimum we check DMI signature and only skip ATKBD_CMD_RESET_DIS if we are running on LG LW25-B7HV or P1-J273B. Cc: stable@vger.kernel.org Signed-off-by: Sheng-Liang Song Signed-off-by: Dmitry Torokhov --- drivers/input/keyboard/atkbd.c | 29 ++++++++++++++++++++++++++++- 1 file changed, 28 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/input/keyboard/atkbd.c b/drivers/input/keyboard/atkbd.c index 2626773ff29b..2dd1d0dd4f7d 100644 --- a/drivers/input/keyboard/atkbd.c +++ b/drivers/input/keyboard/atkbd.c @@ -243,6 +243,12 @@ static void (*atkbd_platform_fixup)(struct atkbd *, const void *data); static void *atkbd_platform_fixup_data; static unsigned int (*atkbd_platform_scancode_fixup)(struct atkbd *, unsigned int); +/* + * Certain keyboards to not like ATKBD_CMD_RESET_DIS and stop responding + * to many commands until full reset (ATKBD_CMD_RESET_BAT) is performed. + */ +static bool atkbd_skip_deactivate; + static ssize_t atkbd_attr_show_helper(struct device *dev, char *buf, ssize_t (*handler)(struct atkbd *, char *)); static ssize_t atkbd_attr_set_helper(struct device *dev, const char *buf, size_t count, @@ -768,7 +774,8 @@ static int atkbd_probe(struct atkbd *atkbd) * Make sure nothing is coming from the keyboard and disturbs our * internal state. */ - atkbd_deactivate(atkbd); + if (!atkbd_skip_deactivate) + atkbd_deactivate(atkbd); return 0; } @@ -1638,6 +1645,12 @@ static int __init atkbd_setup_scancode_fixup(const struct dmi_system_id *id) return 1; } +static int __init atkbd_deactivate_fixup(const struct dmi_system_id *id) +{ + atkbd_skip_deactivate = true; + return 1; +} + static const struct dmi_system_id atkbd_dmi_quirk_table[] __initconst = { { .matches = { @@ -1775,6 +1788,20 @@ static const struct dmi_system_id atkbd_dmi_quirk_table[] __initconst = { .callback = atkbd_setup_scancode_fixup, .driver_data = atkbd_oqo_01plus_scancode_fixup, }, + { + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "LG Electronics"), + DMI_MATCH(DMI_PRODUCT_NAME, "LW25-B7HV"), + }, + .callback = atkbd_deactivate_fixup, + }, + { + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "LG Electronics"), + DMI_MATCH(DMI_PRODUCT_NAME, "P1-J273B"), + }, + .callback = atkbd_deactivate_fixup, + }, { } }; -- cgit v1.2.1 From 3c49aa852e00978ba2f1a4d1e4598a0c669a5347 Mon Sep 17 00:00:00 2001 From: Marcel Holtmann Date: Tue, 22 Apr 2014 14:04:16 -0700 Subject: Revert "Bluetooth: Enable autosuspend for Intel Bluetooth device" This reverts commit d2bee8fb6e18f6116aada39851918473761f7ab1. Enabling autosuspend for Intel Bluetooth devices has been shown to not work reliable. It does work for some people with certain combinations of USB host controllers, but for others it puts the device to sleep and it will not wake up for any event. These events can be important ones like HCI Inquiry Complete or HCI Connection Request. The events will arrive as soon as you poke the device with a new command, but that is not something we can do in these cases. Initially there were patches to the xHCI USB controller that fixed this for some people, but not for all. This could be well a problem somewhere in the USB subsystem or in the USB host controllers or just plain a hardware issue somewhere. At this moment we just do not know and the only safe action is to revert this patch. Signed-off-by: Marcel Holtmann Cc: Tedd Ho-Jeong An Cc: stable@vger.kernel.org Signed-off-by: Gustavo Padovan --- drivers/bluetooth/btusb.c | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c index f338b0c5a8de..dc99eff2a4de 100644 --- a/drivers/bluetooth/btusb.c +++ b/drivers/bluetooth/btusb.c @@ -1485,10 +1485,8 @@ static int btusb_probe(struct usb_interface *intf, if (id->driver_info & BTUSB_BCM92035) hdev->setup = btusb_setup_bcm92035; - if (id->driver_info & BTUSB_INTEL) { - usb_enable_autosuspend(data->udev); + if (id->driver_info & BTUSB_INTEL) hdev->setup = btusb_setup_intel; - } /* Interface numbers are hardcoded in the specification */ data->isoc = usb_ifnum_to_if(data->udev, 1); -- cgit v1.2.1 From 1fb4e09a7e780b915dbd172592ae7e2a4c071065 Mon Sep 17 00:00:00 2001 From: Mohammed Habibulla Date: Thu, 17 Apr 2014 11:37:13 -0700 Subject: Bluetooth: Add support for Lite-on [04ca:3007] Add support for the AR9462 chip T: Bus=01 Lev=01 Prnt=01 Port=03 Cnt=03 Dev#= 3 Spd=12 MxCh= 0 D: Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=04ca ProdID=3007 Rev= 0.01 C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms Signed-off-by: Mohammed Habibulla Cc: stable@vger.kernel.org Signed-off-by: Gustavo Padovan --- drivers/bluetooth/ath3k.c | 2 ++ drivers/bluetooth/btusb.c | 1 + 2 files changed, 3 insertions(+) (limited to 'drivers') diff --git a/drivers/bluetooth/ath3k.c b/drivers/bluetooth/ath3k.c index be571fef185d..a83b57e57b63 100644 --- a/drivers/bluetooth/ath3k.c +++ b/drivers/bluetooth/ath3k.c @@ -82,6 +82,7 @@ static const struct usb_device_id ath3k_table[] = { { USB_DEVICE(0x04CA, 0x3004) }, { USB_DEVICE(0x04CA, 0x3005) }, { USB_DEVICE(0x04CA, 0x3006) }, + { USB_DEVICE(0x04CA, 0x3007) }, { USB_DEVICE(0x04CA, 0x3008) }, { USB_DEVICE(0x04CA, 0x300b) }, { USB_DEVICE(0x0930, 0x0219) }, @@ -131,6 +132,7 @@ static const struct usb_device_id ath3k_blist_tbl[] = { { USB_DEVICE(0x04ca, 0x3004), .driver_info = BTUSB_ATH3012 }, { USB_DEVICE(0x04ca, 0x3005), .driver_info = BTUSB_ATH3012 }, { USB_DEVICE(0x04ca, 0x3006), .driver_info = BTUSB_ATH3012 }, + { USB_DEVICE(0x04ca, 0x3007), .driver_info = BTUSB_ATH3012 }, { USB_DEVICE(0x04ca, 0x3008), .driver_info = BTUSB_ATH3012 }, { USB_DEVICE(0x04ca, 0x300b), .driver_info = BTUSB_ATH3012 }, { USB_DEVICE(0x0930, 0x0219), .driver_info = BTUSB_ATH3012 }, diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c index dc99eff2a4de..a7dfbf9a3afb 100644 --- a/drivers/bluetooth/btusb.c +++ b/drivers/bluetooth/btusb.c @@ -152,6 +152,7 @@ static const struct usb_device_id blacklist_table[] = { { USB_DEVICE(0x04ca, 0x3004), .driver_info = BTUSB_ATH3012 }, { USB_DEVICE(0x04ca, 0x3005), .driver_info = BTUSB_ATH3012 }, { USB_DEVICE(0x04ca, 0x3006), .driver_info = BTUSB_ATH3012 }, + { USB_DEVICE(0x04ca, 0x3007), .driver_info = BTUSB_ATH3012 }, { USB_DEVICE(0x04ca, 0x3008), .driver_info = BTUSB_ATH3012 }, { USB_DEVICE(0x04ca, 0x300b), .driver_info = BTUSB_ATH3012 }, { USB_DEVICE(0x0930, 0x0219), .driver_info = BTUSB_ATH3012 }, -- cgit v1.2.1 From ef3714fdbc8d4bb0af2eff584519f9687aed0fcb Mon Sep 17 00:00:00 2001 From: "Dr. H. Nikolaus Schaller" Date: Thu, 24 Apr 2014 23:42:43 -0700 Subject: Input: bma150 - extend chip detection for bma180 This driver has been used while on the OpenPhoenux GTA04 with a BMA180. Signed-off-by: H. Nikolaus Schaller Signed-off-by: Dmitry Torokhov --- drivers/input/misc/bma150.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/input/misc/bma150.c b/drivers/input/misc/bma150.c index 52d3a9b28f0b..b36831c828d3 100644 --- a/drivers/input/misc/bma150.c +++ b/drivers/input/misc/bma150.c @@ -70,6 +70,7 @@ #define BMA150_CFG_5_REG 0x11 #define BMA150_CHIP_ID 2 +#define BMA180_CHIP_ID 3 #define BMA150_CHIP_ID_REG BMA150_DATA_0_REG #define BMA150_ACC_X_LSB_REG BMA150_DATA_2_REG @@ -539,7 +540,7 @@ static int bma150_probe(struct i2c_client *client, } chip_id = i2c_smbus_read_byte_data(client, BMA150_CHIP_ID_REG); - if (chip_id != BMA150_CHIP_ID) { + if (chip_id != BMA150_CHIP_ID && chip_id != BMA180_CHIP_ID) { dev_err(&client->dev, "BMA150 chip id error: %d\n", chip_id); return -EINVAL; } @@ -643,6 +644,7 @@ static UNIVERSAL_DEV_PM_OPS(bma150_pm, bma150_suspend, bma150_resume, NULL); static const struct i2c_device_id bma150_id[] = { { "bma150", 0 }, + { "bma180", 0 }, { "smb380", 0 }, { "bma023", 0 }, { } -- cgit v1.2.1 From c16134976fb27d325ae037a8b39b537a77ba1d12 Mon Sep 17 00:00:00 2001 From: "Dr. H. Nikolaus Schaller" Date: Thu, 24 Apr 2014 23:43:36 -0700 Subject: Input: tca8418 - fix loading this driver as a module from a device tree Loading the tca8418 driver as a module on a device tree based system needs a MODULE_ALIAS because the driver name does not match the automatic name generation rules of a 'compatible' entry on i2c bus. Signed-off-by: H. Nikolaus Schaller Signed-off-by: Dmitry Torokhov --- drivers/input/keyboard/tca8418_keypad.c | 7 +++++++ 1 file changed, 7 insertions(+) (limited to 'drivers') diff --git a/drivers/input/keyboard/tca8418_keypad.c b/drivers/input/keyboard/tca8418_keypad.c index 55c15304ddbc..4e491c1762cf 100644 --- a/drivers/input/keyboard/tca8418_keypad.c +++ b/drivers/input/keyboard/tca8418_keypad.c @@ -392,6 +392,13 @@ static const struct of_device_id tca8418_dt_ids[] = { { } }; MODULE_DEVICE_TABLE(of, tca8418_dt_ids); + +/* + * The device tree based i2c loader looks for + * "i2c:" + second_component_of(property("compatible")) + * and therefore we need an alias to be found. + */ +MODULE_ALIAS("i2c:tca8418"); #endif static struct i2c_driver tca8418_keypad_driver = { -- cgit v1.2.1 From 1ffa2425bf7cc70f87d5cdbe12175fd4c661dd19 Mon Sep 17 00:00:00 2001 From: Micah Richert Date: Wed, 9 Apr 2014 14:11:31 -0700 Subject: drm/msm: fix memory leak Signed-off-by: Micah Richert Signed-off-by: Rob Clark --- drivers/gpu/drm/msm/msm_gem.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/msm/msm_gem.c b/drivers/gpu/drm/msm/msm_gem.c index 3da8264d3039..bb8026daebc9 100644 --- a/drivers/gpu/drm/msm/msm_gem.c +++ b/drivers/gpu/drm/msm/msm_gem.c @@ -118,8 +118,10 @@ static void put_pages(struct drm_gem_object *obj) if (iommu_present(&platform_bus_type)) drm_gem_put_pages(obj, msm_obj->pages, true, false); - else + else { drm_mm_remove_node(msm_obj->vram_node); + drm_free_large(msm_obj->pages); + } msm_obj->pages = NULL; } -- cgit v1.2.1 From 96673ecbd7f638c0865045377a44f53cd8606850 Mon Sep 17 00:00:00 2001 From: Rob Clark Date: Fri, 25 Apr 2014 08:50:08 -0400 Subject: drm/msm: default to XR24 rather than AR24 Since X11 is going to create an XR24 fb, if the pixel formats do not match then crtc helpers will think it is a full modeset even if mode is the same, which prevents smooth/flickerless handover from fbcon/plymouth to X11. Signed-off-by: Rob Clark --- drivers/gpu/drm/msm/msm_fbdev.c | 5 +---- 1 file changed, 1 insertion(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/msm/msm_fbdev.c b/drivers/gpu/drm/msm/msm_fbdev.c index 6c6d7d4c9b4e..a752ab83b810 100644 --- a/drivers/gpu/drm/msm/msm_fbdev.c +++ b/drivers/gpu/drm/msm/msm_fbdev.c @@ -62,11 +62,8 @@ static int msm_fbdev_create(struct drm_fb_helper *helper, dma_addr_t paddr; int ret, size; - /* only doing ARGB32 since this is what is needed to alpha-blend - * with video overlays: - */ sizes->surface_bpp = 32; - sizes->surface_depth = 32; + sizes->surface_depth = 24; DBG("create fbdev: %dx%d@%d (%dx%d)", sizes->surface_width, sizes->surface_height, sizes->surface_bpp, -- cgit v1.2.1 From 7d8d9f670513593377cd1442f987ce03a64ba55d Mon Sep 17 00:00:00 2001 From: Rob Clark Date: Tue, 22 Apr 2014 12:27:28 -0400 Subject: drm/msm/mdp4: cure for the cursor blues (v2) The hw cursor is relatively adept at triggering underflows, which manifest as a "blue flash" (since blue is configured as the underflow color). Juggle a few things around to tighten up the timing for setting cursor registers in DONE irq. And most importantly, don't ever disable the hw cursor. Instead flip it to a blank/empty cursor. This seems far more reliable, as even simply clearing the cursor-enable bit (with no other updates in previous/ following frames) can in some cases cause underflow. v1: original v2: add missing locking spotted by Micah Cc: Micah Richert Signed-off-by: Rob Clark --- drivers/gpu/drm/msm/mdp/mdp4/mdp4_crtc.c | 9 +++------ drivers/gpu/drm/msm/mdp/mdp4/mdp4_irq.c | 4 ++-- drivers/gpu/drm/msm/mdp/mdp4/mdp4_kms.c | 21 +++++++++++++++++++++ drivers/gpu/drm/msm/mdp/mdp4/mdp4_kms.h | 4 ++++ drivers/gpu/drm/msm/mdp/mdp5/mdp5_irq.c | 4 ++-- 5 files changed, 32 insertions(+), 10 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/msm/mdp/mdp4/mdp4_crtc.c b/drivers/gpu/drm/msm/mdp/mdp4/mdp4_crtc.c index 3e6c0f3ed592..ef9957dbac94 100644 --- a/drivers/gpu/drm/msm/mdp/mdp4/mdp4_crtc.c +++ b/drivers/gpu/drm/msm/mdp/mdp4/mdp4_crtc.c @@ -510,9 +510,8 @@ static void update_cursor(struct drm_crtc *crtc) MDP4_DMA_CURSOR_BLEND_CONFIG_CURSOR_EN); } else { /* disable cursor: */ - mdp4_write(mdp4_kms, REG_MDP4_DMA_CURSOR_BASE(dma), 0); - mdp4_write(mdp4_kms, REG_MDP4_DMA_CURSOR_BLEND_CONFIG(dma), - MDP4_DMA_CURSOR_BLEND_CONFIG_FORMAT(CURSOR_ARGB)); + mdp4_write(mdp4_kms, REG_MDP4_DMA_CURSOR_BASE(dma), + mdp4_kms->blank_cursor_iova); } /* and drop the iova ref + obj rev when done scanning out: */ @@ -574,11 +573,9 @@ static int mdp4_crtc_cursor_set(struct drm_crtc *crtc, if (old_bo) { /* drop our previous reference: */ - msm_gem_put_iova(old_bo, mdp4_kms->id); - drm_gem_object_unreference_unlocked(old_bo); + drm_flip_work_queue(&mdp4_crtc->unref_cursor_work, old_bo); } - crtc_flush(crtc); request_pending(crtc, PENDING_CURSOR); return 0; diff --git a/drivers/gpu/drm/msm/mdp/mdp4/mdp4_irq.c b/drivers/gpu/drm/msm/mdp/mdp4/mdp4_irq.c index c740ccd1cc67..8edd531cb621 100644 --- a/drivers/gpu/drm/msm/mdp/mdp4/mdp4_irq.c +++ b/drivers/gpu/drm/msm/mdp/mdp4/mdp4_irq.c @@ -70,12 +70,12 @@ irqreturn_t mdp4_irq(struct msm_kms *kms) VERB("status=%08x", status); + mdp_dispatch_irqs(mdp_kms, status); + for (id = 0; id < priv->num_crtcs; id++) if (status & mdp4_crtc_vblank(priv->crtcs[id])) drm_handle_vblank(dev, id); - mdp_dispatch_irqs(mdp_kms, status); - return IRQ_HANDLED; } diff --git a/drivers/gpu/drm/msm/mdp/mdp4/mdp4_kms.c b/drivers/gpu/drm/msm/mdp/mdp4/mdp4_kms.c index 272e707c9487..0bb4faa17523 100644 --- a/drivers/gpu/drm/msm/mdp/mdp4/mdp4_kms.c +++ b/drivers/gpu/drm/msm/mdp/mdp4/mdp4_kms.c @@ -144,6 +144,10 @@ static void mdp4_preclose(struct msm_kms *kms, struct drm_file *file) static void mdp4_destroy(struct msm_kms *kms) { struct mdp4_kms *mdp4_kms = to_mdp4_kms(to_mdp_kms(kms)); + if (mdp4_kms->blank_cursor_iova) + msm_gem_put_iova(mdp4_kms->blank_cursor_bo, mdp4_kms->id); + if (mdp4_kms->blank_cursor_bo) + drm_gem_object_unreference(mdp4_kms->blank_cursor_bo); kfree(mdp4_kms); } @@ -372,6 +376,23 @@ struct msm_kms *mdp4_kms_init(struct drm_device *dev) goto fail; } + mutex_lock(&dev->struct_mutex); + mdp4_kms->blank_cursor_bo = msm_gem_new(dev, SZ_16K, MSM_BO_WC); + mutex_unlock(&dev->struct_mutex); + if (IS_ERR(mdp4_kms->blank_cursor_bo)) { + ret = PTR_ERR(mdp4_kms->blank_cursor_bo); + dev_err(dev->dev, "could not allocate blank-cursor bo: %d\n", ret); + mdp4_kms->blank_cursor_bo = NULL; + goto fail; + } + + ret = msm_gem_get_iova(mdp4_kms->blank_cursor_bo, mdp4_kms->id, + &mdp4_kms->blank_cursor_iova); + if (ret) { + dev_err(dev->dev, "could not pin blank-cursor bo: %d\n", ret); + goto fail; + } + return kms; fail: diff --git a/drivers/gpu/drm/msm/mdp/mdp4/mdp4_kms.h b/drivers/gpu/drm/msm/mdp/mdp4/mdp4_kms.h index 66a4d31aec80..715520c54cde 100644 --- a/drivers/gpu/drm/msm/mdp/mdp4/mdp4_kms.h +++ b/drivers/gpu/drm/msm/mdp/mdp4/mdp4_kms.h @@ -44,6 +44,10 @@ struct mdp4_kms { struct clk *lut_clk; struct mdp_irq error_handler; + + /* empty/blank cursor bo to use when cursor is "disabled" */ + struct drm_gem_object *blank_cursor_bo; + uint32_t blank_cursor_iova; }; #define to_mdp4_kms(x) container_of(x, struct mdp4_kms, base) diff --git a/drivers/gpu/drm/msm/mdp/mdp5/mdp5_irq.c b/drivers/gpu/drm/msm/mdp/mdp5/mdp5_irq.c index 353d494a497f..f2b985bc2adf 100644 --- a/drivers/gpu/drm/msm/mdp/mdp5/mdp5_irq.c +++ b/drivers/gpu/drm/msm/mdp/mdp5/mdp5_irq.c @@ -71,11 +71,11 @@ static void mdp5_irq_mdp(struct mdp_kms *mdp_kms) VERB("status=%08x", status); + mdp_dispatch_irqs(mdp_kms, status); + for (id = 0; id < priv->num_crtcs; id++) if (status & mdp5_crtc_vblank(priv->crtcs[id])) drm_handle_vblank(dev, id); - - mdp_dispatch_irqs(mdp_kms, status); } irqreturn_t mdp5_irq(struct msm_kms *kms) -- cgit v1.2.1 From 3ff04a160a891e56cdcee5c198d4c764d1c8c78b Mon Sep 17 00:00:00 2001 From: Daniel Vetter Date: Thu, 24 Apr 2014 12:03:17 +0200 Subject: drm/i915: Don't WARN nor handle unexpected hpd interrupts on gmch platforms The status bits are unconditionally set, the control bits only enable the actual interrupt generation. Which means if we get some random other interrupts we'll bogusly complain about them. So restrict the WARN to platforms with a sane hotplug interrupt handling scheme. And even more important also don't attempt to process the hpd bit since we've detected a storm already. Instead just clear the bit silently. This WARN has been introduced in commit b8f102e8bf71cacf33326360fdf9dcfd1a63925b Author: Egbert Eich Date: Fri Jul 26 14:14:24 2013 +0200 drm/i915: Add messages useful for HPD storm detection debugging (v2) before that we silently handled the hpd event and so partially defeated the storm detection. v2: Pimp commit message (Jani) Cc: Jani Nikula Cc: Egbert Eich Cc: bitlord Reported-by: bitlord Cc: stable@vger.kernel.org Signed-off-by: Daniel Vetter Signed-off-by: Jani Nikula --- drivers/gpu/drm/i915/i915_irq.c | 18 ++++++++++++++---- 1 file changed, 14 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/i915/i915_irq.c b/drivers/gpu/drm/i915/i915_irq.c index 7753249b3a95..f98ba4e6e70b 100644 --- a/drivers/gpu/drm/i915/i915_irq.c +++ b/drivers/gpu/drm/i915/i915_irq.c @@ -1362,10 +1362,20 @@ static inline void intel_hpd_irq_handler(struct drm_device *dev, spin_lock(&dev_priv->irq_lock); for (i = 1; i < HPD_NUM_PINS; i++) { - WARN_ONCE(hpd[i] & hotplug_trigger && - dev_priv->hpd_stats[i].hpd_mark == HPD_DISABLED, - "Received HPD interrupt (0x%08x) on pin %d (0x%08x) although disabled\n", - hotplug_trigger, i, hpd[i]); + if (hpd[i] & hotplug_trigger && + dev_priv->hpd_stats[i].hpd_mark == HPD_DISABLED) { + /* + * On GMCH platforms the interrupt mask bits only + * prevent irq generation, not the setting of the + * hotplug bits itself. So only WARN about unexpected + * interrupts on saner platforms. + */ + WARN_ONCE(INTEL_INFO(dev)->gen >= 5 && !IS_VALLEYVIEW(dev), + "Received HPD interrupt (0x%08x) on pin %d (0x%08x) although disabled\n", + hotplug_trigger, i, hpd[i]); + + continue; + } if (!(hpd[i] & hotplug_trigger) || dev_priv->hpd_stats[i].hpd_mark != HPD_ENABLED) -- cgit v1.2.1 From 78f2975eec9faff353a6194e854d3d39907bab68 Mon Sep 17 00:00:00 2001 From: Chris Wilson Date: Wed, 2 Apr 2014 16:36:07 +0100 Subject: drm/i915: Move all ring resets before setting the HWS page In commit a51435a3137ad8ae75c288c39bd2d8b2696bae8f Author: Naresh Kumar Kachhi Date: Wed Mar 12 16:39:40 2014 +0530 drm/i915: disable rings before HW status page setup we reordered stopping the rings to do so before we set the HWS register. However, there is an extra workaround for g45 to reset the rings twice, and for consistency we should apply that workaround before setting the HWS to be sure that the rings are truly stopped. Reference: http://lkml.kernel.org/r/20140423202248.GA3621@amd.pavel.ucw.cz Tested-by: Pavel Machek Cc: Naresh Kumar Kachhi Signed-off-by: Chris Wilson Reviewed-by: Jesse Barnes Signed-off-by: Daniel Vetter Signed-off-by: Jani Nikula --- drivers/gpu/drm/i915/i915_reg.h | 1 + drivers/gpu/drm/i915/intel_ringbuffer.c | 54 +++++++++++++++++++++------------ drivers/gpu/drm/i915/intel_ringbuffer.h | 1 + 3 files changed, 36 insertions(+), 20 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h index 9f5b18d9d885..c77af69c2d8f 100644 --- a/drivers/gpu/drm/i915/i915_reg.h +++ b/drivers/gpu/drm/i915/i915_reg.h @@ -827,6 +827,7 @@ enum punit_power_well { # define MI_FLUSH_ENABLE (1 << 12) # define ASYNC_FLIP_PERF_DISABLE (1 << 14) # define MODE_IDLE (1 << 9) +# define STOP_RING (1 << 8) #define GEN6_GT_MODE 0x20d0 #define GEN7_GT_MODE 0x7008 diff --git a/drivers/gpu/drm/i915/intel_ringbuffer.c b/drivers/gpu/drm/i915/intel_ringbuffer.c index 6bc68bdcf433..79fb4cc2137c 100644 --- a/drivers/gpu/drm/i915/intel_ringbuffer.c +++ b/drivers/gpu/drm/i915/intel_ringbuffer.c @@ -437,32 +437,41 @@ static void ring_setup_phys_status_page(struct intel_ring_buffer *ring) I915_WRITE(HWS_PGA, addr); } -static int init_ring_common(struct intel_ring_buffer *ring) +static bool stop_ring(struct intel_ring_buffer *ring) { - struct drm_device *dev = ring->dev; - struct drm_i915_private *dev_priv = dev->dev_private; - struct drm_i915_gem_object *obj = ring->obj; - int ret = 0; - u32 head; + struct drm_i915_private *dev_priv = to_i915(ring->dev); - gen6_gt_force_wake_get(dev_priv, FORCEWAKE_ALL); + if (!IS_GEN2(ring->dev)) { + I915_WRITE_MODE(ring, _MASKED_BIT_ENABLE(STOP_RING)); + if (wait_for_atomic((I915_READ_MODE(ring) & MODE_IDLE) != 0, 1000)) { + DRM_ERROR("%s :timed out trying to stop ring\n", ring->name); + return false; + } + } - /* Stop the ring if it's running. */ I915_WRITE_CTL(ring, 0); I915_WRITE_HEAD(ring, 0); ring->write_tail(ring, 0); - if (wait_for_atomic((I915_READ_MODE(ring) & MODE_IDLE) != 0, 1000)) - DRM_ERROR("%s :timed out trying to stop ring\n", ring->name); - if (I915_NEED_GFX_HWS(dev)) - intel_ring_setup_status_page(ring); - else - ring_setup_phys_status_page(ring); + if (!IS_GEN2(ring->dev)) { + (void)I915_READ_CTL(ring); + I915_WRITE_MODE(ring, _MASKED_BIT_DISABLE(STOP_RING)); + } - head = I915_READ_HEAD(ring) & HEAD_ADDR; + return (I915_READ_HEAD(ring) & HEAD_ADDR) == 0; +} - /* G45 ring initialization fails to reset head to zero */ - if (head != 0) { +static int init_ring_common(struct intel_ring_buffer *ring) +{ + struct drm_device *dev = ring->dev; + struct drm_i915_private *dev_priv = dev->dev_private; + struct drm_i915_gem_object *obj = ring->obj; + int ret = 0; + + gen6_gt_force_wake_get(dev_priv, FORCEWAKE_ALL); + + if (!stop_ring(ring)) { + /* G45 ring initialization often fails to reset head to zero */ DRM_DEBUG_KMS("%s head not reset to zero " "ctl %08x head %08x tail %08x start %08x\n", ring->name, @@ -471,9 +480,7 @@ static int init_ring_common(struct intel_ring_buffer *ring) I915_READ_TAIL(ring), I915_READ_START(ring)); - I915_WRITE_HEAD(ring, 0); - - if (I915_READ_HEAD(ring) & HEAD_ADDR) { + if (!stop_ring(ring)) { DRM_ERROR("failed to set %s head to zero " "ctl %08x head %08x tail %08x start %08x\n", ring->name, @@ -481,9 +488,16 @@ static int init_ring_common(struct intel_ring_buffer *ring) I915_READ_HEAD(ring), I915_READ_TAIL(ring), I915_READ_START(ring)); + ret = -EIO; + goto out; } } + if (I915_NEED_GFX_HWS(dev)) + intel_ring_setup_status_page(ring); + else + ring_setup_phys_status_page(ring); + /* Initialize the ring. This must happen _after_ we've cleared the ring * registers with the above sequence (the readback of the HEAD registers * also enforces ordering), otherwise the hw might lose the new ring diff --git a/drivers/gpu/drm/i915/intel_ringbuffer.h b/drivers/gpu/drm/i915/intel_ringbuffer.h index 270a6a973438..2b91c4b4d34b 100644 --- a/drivers/gpu/drm/i915/intel_ringbuffer.h +++ b/drivers/gpu/drm/i915/intel_ringbuffer.h @@ -34,6 +34,7 @@ struct intel_hw_status_page { #define I915_WRITE_IMR(ring, val) I915_WRITE(RING_IMR((ring)->mmio_base), val) #define I915_READ_MODE(ring) I915_READ(RING_MI_MODE((ring)->mmio_base)) +#define I915_WRITE_MODE(ring, val) I915_WRITE(RING_MI_MODE((ring)->mmio_base), val) enum intel_ring_hangcheck_action { HANGCHECK_IDLE = 0, -- cgit v1.2.1 From 7f1950fbb989e8fc5463b307e062b4529d51c862 Mon Sep 17 00:00:00 2001 From: Egbert Eich Date: Fri, 25 Apr 2014 10:56:22 +0200 Subject: drm/i915: Break encoder->crtc link separately in intel_sanitize_crtc() Depending on the SDVO output_flags SDVO may have multiple connectors linking to the same encoder (in intel_connector->encoder->base). Only one of those connectors should be active (ie link to the encoder thru drm_connector->encoder). If intel_connector_break_all_links() is called from intel_sanitize_crtc() we may break the crtc connection of an encoder thru an inactive connector in which case intel_connector_break_all_links() will not be called again for the active connector if this happens to come later in the list due to: if (connector->encoder->base.crtc != &crtc->base) continue; in intel_sanitize_crtc(). This will however leave the drm_connector->encoder linkage for this active connector in place. Subsequently this will cause multiple warnings in intel_connector_check_state() to trigger and the driver will eventually die in drm_encoder_crtc_ok() (because of crtc == NULL). To avoid this remove intel_connector_break_all_links() and move its code to its two calling functions: intel_sanitize_crtc() and intel_sanitize_encoder(). This allows to implement the link breaking more flexibly matching the surrounding code: ie. in intel_sanitize_crtc() we can break the crtc link separatly after the links to the encoders have been broken which avoids above problem. This regression has been introduced in: commit 24929352481f085c5f85d4d4cbc919ddf106d381 Author: Daniel Vetter Date: Mon Jul 2 20:28:59 2012 +0200 drm/i915: read out the modeset hw state at load and resume time so goes back to the very beginning of the modeset rework. v2: This patch takes care of the concernes voiced by Chris Wilson and Daniel Vetter that only breaking links if the drm_connector is linked to an encoder may miss some links. v3: move all encoder handling to encoder loop as suggested by Daniel Vetter. Signed-off-by: Egbert Eich Reviewed-by: Daniel Vetter Cc: stable@vger.kernel.org Cc: Jani Nikula Signed-off-by: Jani Nikula --- drivers/gpu/drm/i915/intel_display.c | 26 ++++++++++++++------------ 1 file changed, 14 insertions(+), 12 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c index 69bcc42a0e44..48aa516a1ac0 100644 --- a/drivers/gpu/drm/i915/intel_display.c +++ b/drivers/gpu/drm/i915/intel_display.c @@ -11395,15 +11395,6 @@ void intel_modeset_init(struct drm_device *dev) } } -static void -intel_connector_break_all_links(struct intel_connector *connector) -{ - connector->base.dpms = DRM_MODE_DPMS_OFF; - connector->base.encoder = NULL; - connector->encoder->connectors_active = false; - connector->encoder->base.crtc = NULL; -} - static void intel_enable_pipe_a(struct drm_device *dev) { struct intel_connector *connector; @@ -11485,8 +11476,17 @@ static void intel_sanitize_crtc(struct intel_crtc *crtc) if (connector->encoder->base.crtc != &crtc->base) continue; - intel_connector_break_all_links(connector); + connector->base.dpms = DRM_MODE_DPMS_OFF; + connector->base.encoder = NULL; } + /* multiple connectors may have the same encoder: + * handle them and break crtc link separately */ + list_for_each_entry(connector, &dev->mode_config.connector_list, + base.head) + if (connector->encoder->base.crtc == &crtc->base) { + connector->encoder->base.crtc = NULL; + connector->encoder->connectors_active = false; + } WARN_ON(crtc->active); crtc->base.enabled = false; @@ -11568,6 +11568,8 @@ static void intel_sanitize_encoder(struct intel_encoder *encoder) drm_get_encoder_name(&encoder->base)); encoder->disable(encoder); } + encoder->base.crtc = NULL; + encoder->connectors_active = false; /* Inconsistent output/port/pipe state happens presumably due to * a bug in one of the get_hw_state functions. Or someplace else @@ -11578,8 +11580,8 @@ static void intel_sanitize_encoder(struct intel_encoder *encoder) base.head) { if (connector->encoder != encoder) continue; - - intel_connector_break_all_links(connector); + connector->base.dpms = DRM_MODE_DPMS_OFF; + connector->base.encoder = NULL; } } /* Enabled encoders without active connectors will be fixed in -- cgit v1.2.1 From 1f81b6d22a5980955b01e08cf27fb745dc9b686f Mon Sep 17 00:00:00 2001 From: Julius Werner Date: Fri, 25 Apr 2014 19:20:13 +0300 Subject: usb: xhci: Prefer endpoint context dequeue pointer over stopped_trb We have observed a rare cycle state desync bug after Set TR Dequeue Pointer commands on Intel LynxPoint xHCs (resulting in an endpoint that doesn't fetch new TRBs and thus an unresponsive USB device). It always triggers when a previous Set TR Dequeue Pointer command has set the pointer to the final Link TRB of a segment, and then another URB gets enqueued and cancelled again before it can be completed. Further investigation showed that the xHC had returned the Link TRB in the TRB Pointer field of the Transfer Event (CC == Stopped -- Length Invalid), but when xhci_find_new_dequeue_state() later accesses the Endpoint Context's TR Dequeue Pointer field it is set to the first TRB of the next segment. The driver expects those two values to be the same in this situation, and uses the cycle state of the latter together with the address of the former. This should be fine according to the XHCI specification, since the endpoint ring should be stopped when returning the Transfer Event and thus should not advance over the Link TRB before it gets restarted. However, real-world XHCI implementations apparently don't really care that much about these details, so the driver should follow a more defensive approach to try to work around HC spec violations. This patch removes the stopped_trb variable that had been used to store the TRB Pointer from the last Transfer Event of a stopped TRB. Instead, xhci_find_new_dequeue_state() now relies only on the Endpoint Context, requiring a small amount of additional processing to find the virtual address corresponding to the TR Dequeue Pointer. Some other parts of the function were slightly rearranged to better fit into this model. This patch should be backported to kernels as old as 2.6.31 that contain the commit ae636747146ea97efa18e04576acd3416e2514f5 "USB: xhci: URB cancellation support." Signed-off-by: Julius Werner Cc: stable@vger.kernel.org Signed-off-by: Mathias Nyman Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/xhci-ring.c | 67 ++++++++++++++++++++------------------------ drivers/usb/host/xhci.c | 1 - drivers/usb/host/xhci.h | 2 -- 3 files changed, 31 insertions(+), 39 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c index 5f926bea5ab1..7a0e3c720c00 100644 --- a/drivers/usb/host/xhci-ring.c +++ b/drivers/usb/host/xhci-ring.c @@ -550,6 +550,7 @@ void xhci_find_new_dequeue_state(struct xhci_hcd *xhci, struct xhci_ring *ep_ring; struct xhci_generic_trb *trb; dma_addr_t addr; + u64 hw_dequeue; ep_ring = xhci_triad_to_transfer_ring(xhci, slot_id, ep_index, stream_id); @@ -559,16 +560,6 @@ void xhci_find_new_dequeue_state(struct xhci_hcd *xhci, stream_id); return; } - state->new_cycle_state = 0; - xhci_dbg_trace(xhci, trace_xhci_dbg_cancel_urb, - "Finding segment containing stopped TRB."); - state->new_deq_seg = find_trb_seg(cur_td->start_seg, - dev->eps[ep_index].stopped_trb, - &state->new_cycle_state); - if (!state->new_deq_seg) { - WARN_ON(1); - return; - } /* Dig out the cycle state saved by the xHC during the stop ep cmd */ xhci_dbg_trace(xhci, trace_xhci_dbg_cancel_urb, @@ -577,46 +568,57 @@ void xhci_find_new_dequeue_state(struct xhci_hcd *xhci, if (ep->ep_state & EP_HAS_STREAMS) { struct xhci_stream_ctx *ctx = &ep->stream_info->stream_ctx_array[stream_id]; - state->new_cycle_state = 0x1 & le64_to_cpu(ctx->stream_ring); + hw_dequeue = le64_to_cpu(ctx->stream_ring); } else { struct xhci_ep_ctx *ep_ctx = xhci_get_ep_ctx(xhci, dev->out_ctx, ep_index); - state->new_cycle_state = 0x1 & le64_to_cpu(ep_ctx->deq); + hw_dequeue = le64_to_cpu(ep_ctx->deq); } + /* Find virtual address and segment of hardware dequeue pointer */ + state->new_deq_seg = ep_ring->deq_seg; + state->new_deq_ptr = ep_ring->dequeue; + while (xhci_trb_virt_to_dma(state->new_deq_seg, state->new_deq_ptr) + != (dma_addr_t)(hw_dequeue & ~0xf)) { + next_trb(xhci, ep_ring, &state->new_deq_seg, + &state->new_deq_ptr); + if (state->new_deq_ptr == ep_ring->dequeue) { + WARN_ON(1); + return; + } + } + /* + * Find cycle state for last_trb, starting at old cycle state of + * hw_dequeue. If there is only one segment ring, find_trb_seg() will + * return immediately and cannot toggle the cycle state if this search + * wraps around, so add one more toggle manually in that case. + */ + state->new_cycle_state = hw_dequeue & 0x1; + if (ep_ring->first_seg == ep_ring->first_seg->next && + cur_td->last_trb < state->new_deq_ptr) + state->new_cycle_state ^= 0x1; + state->new_deq_ptr = cur_td->last_trb; xhci_dbg_trace(xhci, trace_xhci_dbg_cancel_urb, "Finding segment containing last TRB in TD."); state->new_deq_seg = find_trb_seg(state->new_deq_seg, - state->new_deq_ptr, - &state->new_cycle_state); + state->new_deq_ptr, &state->new_cycle_state); if (!state->new_deq_seg) { WARN_ON(1); return; } + /* Increment to find next TRB after last_trb. Cycle if appropriate. */ trb = &state->new_deq_ptr->generic; if (TRB_TYPE_LINK_LE32(trb->field[3]) && (trb->field[3] & cpu_to_le32(LINK_TOGGLE))) state->new_cycle_state ^= 0x1; next_trb(xhci, ep_ring, &state->new_deq_seg, &state->new_deq_ptr); - /* - * If there is only one segment in a ring, find_trb_seg()'s while loop - * will not run, and it will return before it has a chance to see if it - * needs to toggle the cycle bit. It can't tell if the stalled transfer - * ended just before the link TRB on a one-segment ring, or if the TD - * wrapped around the top of the ring, because it doesn't have the TD in - * question. Look for the one-segment case where stalled TRB's address - * is greater than the new dequeue pointer address. - */ - if (ep_ring->first_seg == ep_ring->first_seg->next && - state->new_deq_ptr < dev->eps[ep_index].stopped_trb) - state->new_cycle_state ^= 0x1; + /* Don't update the ring cycle state for the producer (us). */ xhci_dbg_trace(xhci, trace_xhci_dbg_cancel_urb, "Cycle state = 0x%x", state->new_cycle_state); - /* Don't update the ring cycle state for the producer (us). */ xhci_dbg_trace(xhci, trace_xhci_dbg_cancel_urb, "New dequeue segment = %p (virtual)", state->new_deq_seg); @@ -799,7 +801,6 @@ static void xhci_handle_cmd_stop_ep(struct xhci_hcd *xhci, int slot_id, if (list_empty(&ep->cancelled_td_list)) { xhci_stop_watchdog_timer_in_irq(xhci, ep); ep->stopped_td = NULL; - ep->stopped_trb = NULL; ring_doorbell_for_active_rings(xhci, slot_id, ep_index); return; } @@ -867,11 +868,9 @@ remove_finished_td: ring_doorbell_for_active_rings(xhci, slot_id, ep_index); } - /* Clear stopped_td and stopped_trb if endpoint is not halted */ - if (!(ep->ep_state & EP_HALTED)) { + /* Clear stopped_td if endpoint is not halted */ + if (!(ep->ep_state & EP_HALTED)) ep->stopped_td = NULL; - ep->stopped_trb = NULL; - } /* * Drop the lock and complete the URBs in the cancelled TD list. @@ -1941,14 +1940,12 @@ static void xhci_cleanup_halted_endpoint(struct xhci_hcd *xhci, struct xhci_virt_ep *ep = &xhci->devs[slot_id]->eps[ep_index]; ep->ep_state |= EP_HALTED; ep->stopped_td = td; - ep->stopped_trb = event_trb; ep->stopped_stream = stream_id; xhci_queue_reset_ep(xhci, slot_id, ep_index); xhci_cleanup_stalled_ring(xhci, td->urb->dev, ep_index); ep->stopped_td = NULL; - ep->stopped_trb = NULL; ep->stopped_stream = 0; xhci_ring_cmd_db(xhci); @@ -2030,7 +2027,6 @@ static int finish_td(struct xhci_hcd *xhci, struct xhci_td *td, * the ring dequeue pointer or take this TD off any lists yet. */ ep->stopped_td = td; - ep->stopped_trb = event_trb; return 0; } else { if (trb_comp_code == COMP_STALL) { @@ -2042,7 +2038,6 @@ static int finish_td(struct xhci_hcd *xhci, struct xhci_td *td, * USB class driver clear the stall later. */ ep->stopped_td = td; - ep->stopped_trb = event_trb; ep->stopped_stream = ep_ring->stream_id; } else if (xhci_requires_manual_halt_cleanup(xhci, ep_ctx, trb_comp_code)) { diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c index 8fe4e124ddd4..988ed5f1cb2c 100644 --- a/drivers/usb/host/xhci.c +++ b/drivers/usb/host/xhci.c @@ -2954,7 +2954,6 @@ void xhci_endpoint_reset(struct usb_hcd *hcd, xhci_ring_cmd_db(xhci); } virt_ep->stopped_td = NULL; - virt_ep->stopped_trb = NULL; virt_ep->stopped_stream = 0; spin_unlock_irqrestore(&xhci->lock, flags); diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h index d280e9213d08..4746816aed3e 100644 --- a/drivers/usb/host/xhci.h +++ b/drivers/usb/host/xhci.h @@ -865,8 +865,6 @@ struct xhci_virt_ep { #define EP_GETTING_NO_STREAMS (1 << 5) /* ---- Related to URB cancellation ---- */ struct list_head cancelled_td_list; - /* The TRB that was last reported in a stopped endpoint ring */ - union xhci_trb *stopped_trb; struct xhci_td *stopped_td; unsigned int stopped_stream; /* Watchdog timer for stop endpoint command to cancel URBs */ -- cgit v1.2.1 From c09ec25d3684cad74d851c0f028a495999591279 Mon Sep 17 00:00:00 2001 From: Denis Turischev Date: Fri, 25 Apr 2014 19:20:14 +0300 Subject: xhci: Switch Intel Lynx Point ports to EHCI on shutdown. The same issue like with Panther Point chipsets. If the USB ports are switched to xHCI on shutdown, the xHCI host will send a spurious interrupt, which will wake the system. Some BIOS have work around for this, but not all. One example is Compulab's mini-desktop, the Intense-PC2. The bug can be avoided if the USB ports are switched back to EHCI on shutdown. This patch should be backported to stable kernels as old as 3.12, that contain the commit 638298dc66ea36623dbc2757a24fc2c4ab41b016 "xhci: Fix spurious wakeups after S5 on Haswell" Signed-off-by: Denis Turischev Cc: stable@vger.kernel.org Signed-off-by: Mathias Nyman Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/xhci-pci.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'drivers') diff --git a/drivers/usb/host/xhci-pci.c b/drivers/usb/host/xhci-pci.c index 47390e369cd4..1715063630bd 100644 --- a/drivers/usb/host/xhci-pci.c +++ b/drivers/usb/host/xhci-pci.c @@ -134,6 +134,8 @@ static void xhci_pci_quirks(struct device *dev, struct xhci_hcd *xhci) */ if (pdev->subsystem_vendor == PCI_VENDOR_ID_HP) xhci->quirks |= XHCI_SPURIOUS_WAKEUP; + + xhci->quirks |= XHCI_SPURIOUS_REBOOT; } if (pdev->vendor == PCI_VENDOR_ID_ETRON && pdev->device == PCI_DEVICE_ID_ASROCK_P67) { -- cgit v1.2.1 From 6db249ebefc6bf5c39f35dfaacc046d8ad3ffd70 Mon Sep 17 00:00:00 2001 From: Igor Gnatenko Date: Fri, 25 Apr 2014 19:20:15 +0300 Subject: xhci: extend quirk for Renesas cards After suspend another Renesas PCI-X USB 3.0 card doesn't work. [root@fedora-20 ~]# lspci -vmnnd 1912: Device: 03:00.0 Class: USB controller [0c03] Vendor: Renesas Technology Corp. [1912] Device: uPD720202 USB 3.0 Host Controller [0015] SVendor: Renesas Technology Corp. [1912] SDevice: uPD720202 USB 3.0 Host Controller [0015] Rev: 02 ProgIf: 30 This patch should be applied to stable kernel 3.14 that contain the commit 1aa9578c1a9450fb21501c4f549f5b1edb557e6d "xhci: Fix resume issues on Renesas chips in Samsung laptops" Reported-and-tested-by: Anatoly Kharchenko Reference: http://redmine.russianfedora.pro/issues/1315 Signed-off-by: Igor Gnatenko Cc: stable@vger.kernel.org # 3.14 Signed-off-by: Mathias Nyman Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/xhci-pci.c | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/host/xhci-pci.c b/drivers/usb/host/xhci-pci.c index 1715063630bd..35d447780707 100644 --- a/drivers/usb/host/xhci-pci.c +++ b/drivers/usb/host/xhci-pci.c @@ -145,9 +145,7 @@ static void xhci_pci_quirks(struct device *dev, struct xhci_hcd *xhci) xhci->quirks |= XHCI_TRUST_TX_LENGTH; } if (pdev->vendor == PCI_VENDOR_ID_RENESAS && - pdev->device == 0x0015 && - pdev->subsystem_vendor == PCI_VENDOR_ID_SAMSUNG && - pdev->subsystem_device == 0xc0cd) + pdev->device == 0x0015) xhci->quirks |= XHCI_RESET_ON_RESUME; if (pdev->vendor == PCI_VENDOR_ID_VIA) xhci->quirks |= XHCI_RESET_ON_RESUME; -- cgit v1.2.1 From 01bb59ebffdec314da8da66266edf29529372f9b Mon Sep 17 00:00:00 2001 From: David Cohen Date: Fri, 25 Apr 2014 19:20:16 +0300 Subject: usb/xhci: fix compilation warning when !CONFIG_PCI && !CONFIG_PM MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit When CONFIG_PCI and CONFIG_PM are not selected, xhci.c gets this warning: drivers/usb/host/xhci.c:409:13: warning: ‘xhci_msix_sync_irqs’ defined but not used [-Wunused-function] Instead of creating nested #ifdefs, this patch fixes it by defining the xHCI PCI stubs as inline. This warning has been in since 3.2 kernel and was caused by commit 421aa841a134f6a743111cf44d0c6d3b45e3cf8c "usb/xhci: hide MSI code behind PCI bars", but wasn't noticed until 3.13 when a configuration with these options was tried Signed-off-by: David Cohen Cc: stable@vger.kernel.org # 3.2 Signed-off-by: Mathias Nyman Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/xhci.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c index 988ed5f1cb2c..300836972faa 100644 --- a/drivers/usb/host/xhci.c +++ b/drivers/usb/host/xhci.c @@ -408,16 +408,16 @@ static int xhci_try_enable_msi(struct usb_hcd *hcd) #else -static int xhci_try_enable_msi(struct usb_hcd *hcd) +static inline int xhci_try_enable_msi(struct usb_hcd *hcd) { return 0; } -static void xhci_cleanup_msix(struct xhci_hcd *xhci) +static inline void xhci_cleanup_msix(struct xhci_hcd *xhci) { } -static void xhci_msix_sync_irqs(struct xhci_hcd *xhci) +static inline void xhci_msix_sync_irqs(struct xhci_hcd *xhci) { } -- cgit v1.2.1 From 5509076d1b4485ce9fb07705fcbcd2695907ab5b Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Fri, 25 Apr 2014 15:23:03 +0200 Subject: USB: io_ti: fix firmware download on big-endian machines During firmware download the device expects memory addresses in big-endian byte order. As the wIndex parameter which hold the address is sent in little-endian byte order regardless of host byte order, we need to use swab16 rather than cpu_to_be16. Also make sure to handle the struct ti_i2c_desc size parameter which is returned in little-endian byte order. Reported-by: Ludovic Drolez Tested-by: Ludovic Drolez Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/io_ti.c | 50 ++++++++++++++++++++++++++++++---------------- 1 file changed, 33 insertions(+), 17 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/serial/io_ti.c b/drivers/usb/serial/io_ti.c index a2db5be9c305..df90dae53eb9 100644 --- a/drivers/usb/serial/io_ti.c +++ b/drivers/usb/serial/io_ti.c @@ -28,6 +28,7 @@ #include #include #include +#include #include #include #include @@ -280,7 +281,7 @@ static int read_download_mem(struct usb_device *dev, int start_address, { int status = 0; __u8 read_length; - __be16 be_start_address; + u16 be_start_address; dev_dbg(&dev->dev, "%s - @ %x for %d\n", __func__, start_address, length); @@ -296,10 +297,14 @@ static int read_download_mem(struct usb_device *dev, int start_address, if (read_length > 1) { dev_dbg(&dev->dev, "%s - @ %x for %d\n", __func__, start_address, read_length); } - be_start_address = cpu_to_be16(start_address); + /* + * NOTE: Must use swab as wIndex is sent in little-endian + * byte order regardless of host byte order. + */ + be_start_address = swab16((u16)start_address); status = ti_vread_sync(dev, UMPC_MEMORY_READ, (__u16)address_type, - (__force __u16)be_start_address, + be_start_address, buffer, read_length); if (status) { @@ -394,7 +399,7 @@ static int write_i2c_mem(struct edgeport_serial *serial, struct device *dev = &serial->serial->dev->dev; int status = 0; int write_length; - __be16 be_start_address; + u16 be_start_address; /* We can only send a maximum of 1 aligned byte page at a time */ @@ -409,11 +414,16 @@ static int write_i2c_mem(struct edgeport_serial *serial, __func__, start_address, write_length); usb_serial_debug_data(dev, __func__, write_length, buffer); - /* Write first page */ - be_start_address = cpu_to_be16(start_address); + /* + * Write first page. + * + * NOTE: Must use swab as wIndex is sent in little-endian byte order + * regardless of host byte order. + */ + be_start_address = swab16((u16)start_address); status = ti_vsend_sync(serial->serial->dev, UMPC_MEMORY_WRITE, (__u16)address_type, - (__force __u16)be_start_address, + be_start_address, buffer, write_length); if (status) { dev_dbg(dev, "%s - ERROR %d\n", __func__, status); @@ -436,11 +446,16 @@ static int write_i2c_mem(struct edgeport_serial *serial, __func__, start_address, write_length); usb_serial_debug_data(dev, __func__, write_length, buffer); - /* Write next page */ - be_start_address = cpu_to_be16(start_address); + /* + * Write next page. + * + * NOTE: Must use swab as wIndex is sent in little-endian byte + * order regardless of host byte order. + */ + be_start_address = swab16((u16)start_address); status = ti_vsend_sync(serial->serial->dev, UMPC_MEMORY_WRITE, (__u16)address_type, - (__force __u16)be_start_address, + be_start_address, buffer, write_length); if (status) { dev_err(dev, "%s - ERROR %d\n", __func__, status); @@ -585,8 +600,8 @@ static int get_descriptor_addr(struct edgeport_serial *serial, if (rom_desc->Type == desc_type) return start_address; - start_address = start_address + sizeof(struct ti_i2c_desc) - + rom_desc->Size; + start_address = start_address + sizeof(struct ti_i2c_desc) + + le16_to_cpu(rom_desc->Size); } while ((start_address < TI_MAX_I2C_SIZE) && rom_desc->Type); @@ -599,7 +614,7 @@ static int valid_csum(struct ti_i2c_desc *rom_desc, __u8 *buffer) __u16 i; __u8 cs = 0; - for (i = 0; i < rom_desc->Size; i++) + for (i = 0; i < le16_to_cpu(rom_desc->Size); i++) cs = (__u8)(cs + buffer[i]); if (cs != rom_desc->CheckSum) { @@ -650,7 +665,7 @@ static int check_i2c_image(struct edgeport_serial *serial) break; if ((start_address + sizeof(struct ti_i2c_desc) + - rom_desc->Size) > TI_MAX_I2C_SIZE) { + le16_to_cpu(rom_desc->Size)) > TI_MAX_I2C_SIZE) { status = -ENODEV; dev_dbg(dev, "%s - structure too big, erroring out.\n", __func__); break; @@ -665,7 +680,8 @@ static int check_i2c_image(struct edgeport_serial *serial) /* Read the descriptor data */ status = read_rom(serial, start_address + sizeof(struct ti_i2c_desc), - rom_desc->Size, buffer); + le16_to_cpu(rom_desc->Size), + buffer); if (status) break; @@ -674,7 +690,7 @@ static int check_i2c_image(struct edgeport_serial *serial) break; } start_address = start_address + sizeof(struct ti_i2c_desc) + - rom_desc->Size; + le16_to_cpu(rom_desc->Size); } while ((rom_desc->Type != I2C_DESC_TYPE_ION) && (start_address < TI_MAX_I2C_SIZE)); @@ -712,7 +728,7 @@ static int get_manuf_info(struct edgeport_serial *serial, __u8 *buffer) /* Read the descriptor data */ status = read_rom(serial, start_address+sizeof(struct ti_i2c_desc), - rom_desc->Size, buffer); + le16_to_cpu(rom_desc->Size), buffer); if (status) goto exit; -- cgit v1.2.1 From a00986f81182a69dee4d2c48e8c19805bdf0f790 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Bj=C3=B8rn=20Mork?= Date: Fri, 25 Apr 2014 18:49:15 +0200 Subject: usb: qcserial: add Sierra Wireless EM7355 MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Cc: Signed-off-by: Bjørn Mork Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/qcserial.c | 3 +++ 1 file changed, 3 insertions(+) (limited to 'drivers') diff --git a/drivers/usb/serial/qcserial.c b/drivers/usb/serial/qcserial.c index 968a40201e5f..662235240f3f 100644 --- a/drivers/usb/serial/qcserial.c +++ b/drivers/usb/serial/qcserial.c @@ -139,6 +139,9 @@ static const struct usb_device_id id_table[] = { {USB_DEVICE_INTERFACE_NUMBER(0x1199, 0x901c, 0)}, /* Sierra Wireless EM7700 Device Management */ {USB_DEVICE_INTERFACE_NUMBER(0x1199, 0x901c, 2)}, /* Sierra Wireless EM7700 NMEA */ {USB_DEVICE_INTERFACE_NUMBER(0x1199, 0x901c, 3)}, /* Sierra Wireless EM7700 Modem */ + {USB_DEVICE_INTERFACE_NUMBER(0x1199, 0x901f, 0)}, /* Sierra Wireless EM7355 Device Management */ + {USB_DEVICE_INTERFACE_NUMBER(0x1199, 0x901f, 2)}, /* Sierra Wireless EM7355 NMEA */ + {USB_DEVICE_INTERFACE_NUMBER(0x1199, 0x901f, 3)}, /* Sierra Wireless EM7355 Modem */ {USB_DEVICE_INTERFACE_NUMBER(0x1199, 0x9051, 0)}, /* Netgear AirCard 340U Device Management */ {USB_DEVICE_INTERFACE_NUMBER(0x1199, 0x9051, 2)}, /* Netgear AirCard 340U NMEA */ {USB_DEVICE_INTERFACE_NUMBER(0x1199, 0x9051, 3)}, /* Netgear AirCard 340U Modem */ -- cgit v1.2.1 From 70a3615fc07c2330ed7c1e922f3c44f4a67c0762 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Bj=C3=B8rn=20Mork?= Date: Fri, 25 Apr 2014 18:49:16 +0200 Subject: usb: qcserial: add Sierra Wireless MC73xx MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Cc: Signed-off-by: Bjørn Mork Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/qcserial.c | 3 +++ 1 file changed, 3 insertions(+) (limited to 'drivers') diff --git a/drivers/usb/serial/qcserial.c b/drivers/usb/serial/qcserial.c index 662235240f3f..1d1bc9b41337 100644 --- a/drivers/usb/serial/qcserial.c +++ b/drivers/usb/serial/qcserial.c @@ -136,6 +136,9 @@ static const struct usb_device_id id_table[] = { {USB_DEVICE_INTERFACE_NUMBER(0x1199, 0x68a2, 0)}, /* Sierra Wireless MC7710 Device Management */ {USB_DEVICE_INTERFACE_NUMBER(0x1199, 0x68a2, 2)}, /* Sierra Wireless MC7710 NMEA */ {USB_DEVICE_INTERFACE_NUMBER(0x1199, 0x68a2, 3)}, /* Sierra Wireless MC7710 Modem */ + {USB_DEVICE_INTERFACE_NUMBER(0x1199, 0x68c0, 0)}, /* Sierra Wireless MC73xx Device Management */ + {USB_DEVICE_INTERFACE_NUMBER(0x1199, 0x68c0, 2)}, /* Sierra Wireless MC73xx NMEA */ + {USB_DEVICE_INTERFACE_NUMBER(0x1199, 0x68c0, 3)}, /* Sierra Wireless MC73xx Modem */ {USB_DEVICE_INTERFACE_NUMBER(0x1199, 0x901c, 0)}, /* Sierra Wireless EM7700 Device Management */ {USB_DEVICE_INTERFACE_NUMBER(0x1199, 0x901c, 2)}, /* Sierra Wireless EM7700 NMEA */ {USB_DEVICE_INTERFACE_NUMBER(0x1199, 0x901c, 3)}, /* Sierra Wireless EM7700 Modem */ -- cgit v1.2.1 From bce4f588f19d59fc07fadfeb0b2a3a06c942827a Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Bj=C3=B8rn=20Mork?= Date: Fri, 25 Apr 2014 18:49:17 +0200 Subject: usb: qcserial: add Sierra Wireless MC7305/MC7355 MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Cc: Signed-off-by: Bjørn Mork Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/qcserial.c | 3 +++ 1 file changed, 3 insertions(+) (limited to 'drivers') diff --git a/drivers/usb/serial/qcserial.c b/drivers/usb/serial/qcserial.c index 1d1bc9b41337..7ed681a714a5 100644 --- a/drivers/usb/serial/qcserial.c +++ b/drivers/usb/serial/qcserial.c @@ -145,6 +145,9 @@ static const struct usb_device_id id_table[] = { {USB_DEVICE_INTERFACE_NUMBER(0x1199, 0x901f, 0)}, /* Sierra Wireless EM7355 Device Management */ {USB_DEVICE_INTERFACE_NUMBER(0x1199, 0x901f, 2)}, /* Sierra Wireless EM7355 NMEA */ {USB_DEVICE_INTERFACE_NUMBER(0x1199, 0x901f, 3)}, /* Sierra Wireless EM7355 Modem */ + {USB_DEVICE_INTERFACE_NUMBER(0x1199, 0x9041, 0)}, /* Sierra Wireless MC7305/MC7355 Device Management */ + {USB_DEVICE_INTERFACE_NUMBER(0x1199, 0x9041, 2)}, /* Sierra Wireless MC7305/MC7355 NMEA */ + {USB_DEVICE_INTERFACE_NUMBER(0x1199, 0x9041, 3)}, /* Sierra Wireless MC7305/MC7355 Modem */ {USB_DEVICE_INTERFACE_NUMBER(0x1199, 0x9051, 0)}, /* Netgear AirCard 340U Device Management */ {USB_DEVICE_INTERFACE_NUMBER(0x1199, 0x9051, 2)}, /* Netgear AirCard 340U NMEA */ {USB_DEVICE_INTERFACE_NUMBER(0x1199, 0x9051, 3)}, /* Netgear AirCard 340U Modem */ -- cgit v1.2.1 From 533b3994610f316e5cd61b56d0c4daa15c830f89 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Bj=C3=B8rn=20Mork?= Date: Fri, 25 Apr 2014 18:49:18 +0200 Subject: usb: option: add Olivetti Olicard 500 MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Device interface layout: 0: ff/ff/ff - serial 1: ff/ff/ff - serial AT+PPP 2: 08/06/50 - storage 3: ff/ff/ff - serial 4: ff/ff/ff - QMI/wwan Cc: Reported-by: Julio Araujo Signed-off-by: Bjørn Mork Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/option.c | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'drivers') diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c index 367c7f08b27c..6335222cb892 100644 --- a/drivers/usb/serial/option.c +++ b/drivers/usb/serial/option.c @@ -349,6 +349,7 @@ static void option_instat_callback(struct urb *urb); #define OLIVETTI_PRODUCT_OLICARD100 0xc000 #define OLIVETTI_PRODUCT_OLICARD145 0xc003 #define OLIVETTI_PRODUCT_OLICARD200 0xc005 +#define OLIVETTI_PRODUCT_OLICARD500 0xc00b /* Celot products */ #define CELOT_VENDOR_ID 0x211f @@ -1545,6 +1546,9 @@ static const struct usb_device_id option_ids[] = { { USB_DEVICE(OLIVETTI_VENDOR_ID, OLIVETTI_PRODUCT_OLICARD200), .driver_info = (kernel_ulong_t)&net_intf6_blacklist }, + { USB_DEVICE(OLIVETTI_VENDOR_ID, OLIVETTI_PRODUCT_OLICARD500), + .driver_info = (kernel_ulong_t)&net_intf4_blacklist + }, { USB_DEVICE(CELOT_VENDOR_ID, CELOT_PRODUCT_CT680M) }, /* CT-650 CDMA 450 1xEVDO modem */ { USB_DEVICE_AND_INTERFACE_INFO(SAMSUNG_VENDOR_ID, SAMSUNG_PRODUCT_GT_B3730, USB_CLASS_CDC_DATA, 0x00, 0x00) }, /* Samsung GT-B3730 LTE USB modem.*/ { USB_DEVICE(YUGA_VENDOR_ID, YUGA_PRODUCT_CEM600) }, -- cgit v1.2.1 From dd6b48ecec2ea7d15f28d5e5474388681899a5e1 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Bj=C3=B8rn=20Mork?= Date: Fri, 25 Apr 2014 18:49:19 +0200 Subject: usb: option: add Alcatel L800MA MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Device interface layout: 0: ff/ff/ff - serial 1: ff/00/00 - serial AT+PPP 2: ff/ff/ff - QMI/wwan 3: 08/06/50 - storage Cc: Signed-off-by: Bjørn Mork Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/option.c | 3 +++ 1 file changed, 3 insertions(+) (limited to 'drivers') diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c index 6335222cb892..776c86f3c091 100644 --- a/drivers/usb/serial/option.c +++ b/drivers/usb/serial/option.c @@ -287,6 +287,7 @@ static void option_instat_callback(struct urb *urb); #define ALCATEL_PRODUCT_X060S_X200 0x0000 #define ALCATEL_PRODUCT_X220_X500D 0x0017 #define ALCATEL_PRODUCT_L100V 0x011e +#define ALCATEL_PRODUCT_L800MA 0x0203 #define PIRELLI_VENDOR_ID 0x1266 #define PIRELLI_PRODUCT_C100_1 0x1002 @@ -1501,6 +1502,8 @@ static const struct usb_device_id option_ids[] = { .driver_info = (kernel_ulong_t)&net_intf5_blacklist }, { USB_DEVICE(ALCATEL_VENDOR_ID, ALCATEL_PRODUCT_L100V), .driver_info = (kernel_ulong_t)&net_intf4_blacklist }, + { USB_DEVICE(ALCATEL_VENDOR_ID, ALCATEL_PRODUCT_L800MA), + .driver_info = (kernel_ulong_t)&net_intf2_blacklist }, { USB_DEVICE(AIRPLUS_VENDOR_ID, AIRPLUS_PRODUCT_MCD650) }, { USB_DEVICE(TLAYTECH_VENDOR_ID, TLAYTECH_PRODUCT_TEU800) }, { USB_DEVICE(LONGCHEER_VENDOR_ID, FOUR_G_SYSTEMS_PRODUCT_W14), -- cgit v1.2.1 From 34f972d6156fe9eea2ab7bb418c71f9d1d5c8e7b Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Bj=C3=B8rn=20Mork?= Date: Fri, 25 Apr 2014 18:49:20 +0200 Subject: usb: option: add and update a number of CMOTech devices MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit A number of older CMOTech modems are based on Qualcomm chips. The blacklisted interfaces are QMI/wwan. Reported-by: Lars Melin Cc: Signed-off-by: Bjørn Mork Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/option.c | 74 ++++++++++++++++++++++++++++++++++++++++++--- 1 file changed, 70 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c index 776c86f3c091..f213ee978516 100644 --- a/drivers/usb/serial/option.c +++ b/drivers/usb/serial/option.c @@ -234,8 +234,31 @@ static void option_instat_callback(struct urb *urb); #define QUALCOMM_VENDOR_ID 0x05C6 #define CMOTECH_VENDOR_ID 0x16d8 -#define CMOTECH_PRODUCT_6008 0x6008 -#define CMOTECH_PRODUCT_6280 0x6280 +#define CMOTECH_PRODUCT_6001 0x6001 +#define CMOTECH_PRODUCT_CMU_300 0x6002 +#define CMOTECH_PRODUCT_6003 0x6003 +#define CMOTECH_PRODUCT_6004 0x6004 +#define CMOTECH_PRODUCT_6005 0x6005 +#define CMOTECH_PRODUCT_CGU_628A 0x6006 +#define CMOTECH_PRODUCT_CHE_628S 0x6007 +#define CMOTECH_PRODUCT_CMU_301 0x6008 +#define CMOTECH_PRODUCT_CHU_628 0x6280 +#define CMOTECH_PRODUCT_CHU_628S 0x6281 +#define CMOTECH_PRODUCT_CDU_680 0x6803 +#define CMOTECH_PRODUCT_CDU_685A 0x6804 +#define CMOTECH_PRODUCT_CHU_720S 0x7001 +#define CMOTECH_PRODUCT_7002 0x7002 +#define CMOTECH_PRODUCT_CHU_629K 0x7003 +#define CMOTECH_PRODUCT_7004 0x7004 +#define CMOTECH_PRODUCT_7005 0x7005 +#define CMOTECH_PRODUCT_CGU_629 0x7006 +#define CMOTECH_PRODUCT_CHU_629S 0x700a +#define CMOTECH_PRODUCT_CHU_720I 0x7211 +#define CMOTECH_PRODUCT_7212 0x7212 +#define CMOTECH_PRODUCT_7213 0x7213 +#define CMOTECH_PRODUCT_7251 0x7251 +#define CMOTECH_PRODUCT_7252 0x7252 +#define CMOTECH_PRODUCT_7253 0x7253 #define TELIT_VENDOR_ID 0x1bc7 #define TELIT_PRODUCT_UC864E 0x1003 @@ -504,6 +527,10 @@ static const struct option_blacklist_info huawei_cdc12_blacklist = { .reserved = BIT(1) | BIT(2), }; +static const struct option_blacklist_info net_intf0_blacklist = { + .reserved = BIT(0), +}; + static const struct option_blacklist_info net_intf1_blacklist = { .reserved = BIT(1), }; @@ -1037,8 +1064,47 @@ static const struct usb_device_id option_ids[] = { { USB_DEVICE(QUALCOMM_VENDOR_ID, 0x6613)}, /* Onda H600/ZTE MF330 */ { USB_DEVICE(QUALCOMM_VENDOR_ID, 0x0023)}, /* ONYX 3G device */ { USB_DEVICE(QUALCOMM_VENDOR_ID, 0x9000)}, /* SIMCom SIM5218 */ - { USB_DEVICE(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_6280) }, /* BP3-USB & BP3-EXT HSDPA */ - { USB_DEVICE(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_6008) }, + { USB_DEVICE(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_6001) }, + { USB_DEVICE(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_CMU_300) }, + { USB_DEVICE(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_6003), + .driver_info = (kernel_ulong_t)&net_intf0_blacklist }, + { USB_DEVICE(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_6004) }, + { USB_DEVICE(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_6005) }, + { USB_DEVICE(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_CGU_628A) }, + { USB_DEVICE(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_CHE_628S), + .driver_info = (kernel_ulong_t)&net_intf0_blacklist }, + { USB_DEVICE(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_CMU_301), + .driver_info = (kernel_ulong_t)&net_intf0_blacklist }, + { USB_DEVICE(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_CHU_628), + .driver_info = (kernel_ulong_t)&net_intf0_blacklist }, + { USB_DEVICE(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_CHU_628S) }, + { USB_DEVICE(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_CDU_680) }, + { USB_DEVICE(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_CDU_685A) }, + { USB_DEVICE(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_CHU_720S), + .driver_info = (kernel_ulong_t)&net_intf0_blacklist }, + { USB_DEVICE(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_7002), + .driver_info = (kernel_ulong_t)&net_intf0_blacklist }, + { USB_DEVICE(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_CHU_629K), + .driver_info = (kernel_ulong_t)&net_intf4_blacklist }, + { USB_DEVICE(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_7004), + .driver_info = (kernel_ulong_t)&net_intf3_blacklist }, + { USB_DEVICE(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_7005) }, + { USB_DEVICE(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_CGU_629), + .driver_info = (kernel_ulong_t)&net_intf5_blacklist }, + { USB_DEVICE(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_CHU_629S), + .driver_info = (kernel_ulong_t)&net_intf4_blacklist }, + { USB_DEVICE(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_CHU_720I), + .driver_info = (kernel_ulong_t)&net_intf0_blacklist }, + { USB_DEVICE(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_7212), + .driver_info = (kernel_ulong_t)&net_intf0_blacklist }, + { USB_DEVICE(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_7213), + .driver_info = (kernel_ulong_t)&net_intf0_blacklist }, + { USB_DEVICE(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_7251), + .driver_info = (kernel_ulong_t)&net_intf1_blacklist }, + { USB_DEVICE(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_7252), + .driver_info = (kernel_ulong_t)&net_intf1_blacklist }, + { USB_DEVICE(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_7253), + .driver_info = (kernel_ulong_t)&net_intf1_blacklist }, { USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_UC864E) }, { USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_UC864G) }, { USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_CC864_DUAL) }, -- cgit v1.2.1 From c60e5760b0a62b072ba00ac07643d9b6fb29f2b4 Mon Sep 17 00:00:00 2001 From: Jimmy Li Date: Fri, 25 Apr 2014 03:52:00 +0100 Subject: staging:iio:ad2s1200 fix missing parenthesis in a for statment. Signed-off-by: Jimmy Li Signed-off-by: Jonathan Cameron --- drivers/staging/iio/resolver/ad2s1200.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/staging/iio/resolver/ad2s1200.c b/drivers/staging/iio/resolver/ad2s1200.c index e2b482045158..017d2f8379b7 100644 --- a/drivers/staging/iio/resolver/ad2s1200.c +++ b/drivers/staging/iio/resolver/ad2s1200.c @@ -107,7 +107,7 @@ static int ad2s1200_probe(struct spi_device *spi) int pn, ret = 0; unsigned short *pins = spi->dev.platform_data; - for (pn = 0; pn < AD2S1200_PN; pn++) + for (pn = 0; pn < AD2S1200_PN; pn++) { ret = devm_gpio_request_one(&spi->dev, pins[pn], GPIOF_DIR_OUT, DRV_NAME); if (ret) { @@ -115,6 +115,7 @@ static int ad2s1200_probe(struct spi_device *spi) pins[pn]); return ret; } + } indio_dev = devm_iio_device_alloc(&spi->dev, sizeof(*st)); if (!indio_dev) return -ENOMEM; -- cgit v1.2.1 From b9b3a41893c3f1be67b5aacfa525969914bea0e9 Mon Sep 17 00:00:00 2001 From: Atilla Filiz Date: Fri, 11 Apr 2014 16:51:23 +0200 Subject: iio:imu:mpu6050: Fixed segfault in Invensens MPU driver due to null dereference The driver segfaults when the kernel boots with device tree as the platform data is then not present and the pointer is deferenced without checking it is not null. This patch introduces such a check avoiding the crash. Signed-off-by: Atilla Filiz Signed-off-by: Jonathan Cameron Cc: Stable@vger.kernel.org --- drivers/iio/imu/inv_mpu6050/inv_mpu_core.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/iio/imu/inv_mpu6050/inv_mpu_core.c b/drivers/iio/imu/inv_mpu6050/inv_mpu_core.c index cb9f96b446a5..d8ad606c7cd0 100644 --- a/drivers/iio/imu/inv_mpu6050/inv_mpu_core.c +++ b/drivers/iio/imu/inv_mpu6050/inv_mpu_core.c @@ -660,6 +660,7 @@ static int inv_mpu_probe(struct i2c_client *client, { struct inv_mpu6050_state *st; struct iio_dev *indio_dev; + struct inv_mpu6050_platform_data *pdata; int result; if (!i2c_check_functionality(client->adapter, @@ -672,8 +673,10 @@ static int inv_mpu_probe(struct i2c_client *client, st = iio_priv(indio_dev); st->client = client; - st->plat_data = *(struct inv_mpu6050_platform_data - *)dev_get_platdata(&client->dev); + pdata = (struct inv_mpu6050_platform_data + *)dev_get_platdata(&client->dev); + if (pdata) + st->plat_data = *pdata; /* power is turned on inside check chip type*/ result = inv_check_and_setup_chip(st, id); if (result) -- cgit v1.2.1 From 3d821a1747a0abbb7a179af10188ad7ad9b35b72 Mon Sep 17 00:00:00 2001 From: Naveen Krishna Ch Date: Fri, 25 Apr 2014 11:14:00 +0100 Subject: iio: exynos_adc: use indio_dev->dev structure to handle child nodes Using pdev->dev with device_for_each_child() would iterate over all of the children of the platform device and delete them. Thus, causing crashes during module unload. We should be using the indio_dev->dev structure for registering/unregistering child nodes. Reported-by: Doug Anderson Signed-off-by: Naveen Krishna Ch Reviewed-by: Doug Anderson Tested-by: Doug Anderson Signed-off-by: Jonathan Cameron --- drivers/iio/adc/exynos_adc.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/iio/adc/exynos_adc.c b/drivers/iio/adc/exynos_adc.c index d25b262193a7..affa93f51789 100644 --- a/drivers/iio/adc/exynos_adc.c +++ b/drivers/iio/adc/exynos_adc.c @@ -344,7 +344,7 @@ static int exynos_adc_probe(struct platform_device *pdev) exynos_adc_hw_init(info); - ret = of_platform_populate(np, exynos_adc_match, NULL, &pdev->dev); + ret = of_platform_populate(np, exynos_adc_match, NULL, &indio_dev->dev); if (ret < 0) { dev_err(&pdev->dev, "failed adding child nodes\n"); goto err_of_populate; @@ -353,7 +353,7 @@ static int exynos_adc_probe(struct platform_device *pdev) return 0; err_of_populate: - device_for_each_child(&pdev->dev, NULL, + device_for_each_child(&indio_dev->dev, NULL, exynos_adc_remove_devices); regulator_disable(info->vdd); clk_disable_unprepare(info->clk); @@ -369,7 +369,7 @@ static int exynos_adc_remove(struct platform_device *pdev) struct iio_dev *indio_dev = platform_get_drvdata(pdev); struct exynos_adc *info = iio_priv(indio_dev); - device_for_each_child(&pdev->dev, NULL, + device_for_each_child(&indio_dev->dev, NULL, exynos_adc_remove_devices); regulator_disable(info->vdd); clk_disable_unprepare(info->clk); -- cgit v1.2.1 From bbc28134e915d2e2e8cac0254d1d056db0ae3247 Mon Sep 17 00:00:00 2001 From: Doug Anderson Date: Tue, 22 Apr 2014 01:03:00 +0100 Subject: iio: adc: Nothing in ADC should be a bool CONFIG The whole IIO subsystem can be built as modules. If you make it a module then stuff marked as "Y" in the adc directory simply won't be linked in properly. The two configs that were wrong were EXYNOS_ADC and LP8788_ADC. I know for a fact that EXYNOS_ADC will work as a module. I assume LP8788_ADC will also be fine. Signed-off-by: Doug Anderson Signed-off-by: Jonathan Cameron --- drivers/iio/adc/Kconfig | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/iio/adc/Kconfig b/drivers/iio/adc/Kconfig index d86196cfe4b4..24c28e3f93a3 100644 --- a/drivers/iio/adc/Kconfig +++ b/drivers/iio/adc/Kconfig @@ -106,7 +106,7 @@ config AT91_ADC Say yes here to build support for Atmel AT91 ADC. config EXYNOS_ADC - bool "Exynos ADC driver support" + tristate "Exynos ADC driver support" depends on OF help Core support for the ADC block found in the Samsung EXYNOS series @@ -114,7 +114,7 @@ config EXYNOS_ADC this resource. config LP8788_ADC - bool "LP8788 ADC driver" + tristate "LP8788 ADC driver" depends on MFD_LP8788 help Say yes here to build support for TI LP8788 ADC. -- cgit v1.2.1 From a3fe964135d0e4b925eaf4a5891c84daa7885c86 Mon Sep 17 00:00:00 2001 From: Shawn Guo Date: Thu, 10 Apr 2014 14:19:05 +0800 Subject: imx-drm: imx-tve: correct DDC property name to 'ddc-i2c-bus' Commit 62e3879 (imx-drm: imx-tve: Fix DDC I2C bus property) was trying to use 'ddc-i2c-bus' as the DDC property name (we can see that from the commit log), but unfortunately 'i2c-ddc-bus' which is a typo was actually used in the code. This results in some unnecessary inconsistency and confusions, because all the documented DDC property in device tree bindings use 'ddc-i2c-bus'. Documentation/devicetree/bindings/staging/imx-drm/hdmi.txt Documentation/devicetree/bindings/panel/simple-panel.txt Documentation/devicetree/bindings/video/dvi-connector.txt Let's fix it before the error spreads. Signed-off-by: Shawn Guo Acked-by: Philipp Zabel Acked-by: Arnd Bergmann Signed-off-by: Russell King --- drivers/staging/imx-drm/imx-tve.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/staging/imx-drm/imx-tve.c b/drivers/staging/imx-drm/imx-tve.c index 575533f4fd64..a23f4f773146 100644 --- a/drivers/staging/imx-drm/imx-tve.c +++ b/drivers/staging/imx-drm/imx-tve.c @@ -582,7 +582,7 @@ static int imx_tve_bind(struct device *dev, struct device *master, void *data) tve->dev = dev; spin_lock_init(&tve->lock); - ddc_node = of_parse_phandle(np, "i2c-ddc-bus", 0); + ddc_node = of_parse_phandle(np, "ddc-i2c-bus", 0); if (ddc_node) { tve->ddc = of_find_i2c_adapter_by_node(ddc_node); of_node_put(ddc_node); -- cgit v1.2.1 From e2a367f8e3c2afd5cfd5f0892844c74960ecc031 Mon Sep 17 00:00:00 2001 From: Yuval Mintz Date: Thu, 24 Apr 2014 19:29:52 +0300 Subject: bnx2x: Memory leak during VF removal When removing a VF interface, the driver fails to release that VF's mailbox and bulletin board allocated memory. Signed-off-by: Yuval Mintz Signed-off-by: Ariel Elior Signed-off-by: David S. Miller --- drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c | 2 ++ drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.c | 13 +++++++++---- drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.h | 2 ++ 3 files changed, 13 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c index a78edaccceee..b260913db236 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c @@ -13233,6 +13233,8 @@ static void __bnx2x_remove(struct pci_dev *pdev, iounmap(bp->doorbells); bnx2x_release_firmware(bp); + } else { + bnx2x_vf_pci_dealloc(bp); } bnx2x_free_mem_bp(bp); diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.c index 5c523b32db70..046c9cca0072 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.c +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.c @@ -2896,6 +2896,14 @@ void __iomem *bnx2x_vf_doorbells(struct bnx2x *bp) return bp->regview + PXP_VF_ADDR_DB_START; } +void bnx2x_vf_pci_dealloc(struct bnx2x *bp) +{ + BNX2X_PCI_FREE(bp->vf2pf_mbox, bp->vf2pf_mbox_mapping, + sizeof(struct bnx2x_vf_mbx_msg)); + BNX2X_PCI_FREE(bp->vf2pf_mbox, bp->pf2vf_bulletin_mapping, + sizeof(union pf_vf_bulletin)); +} + int bnx2x_vf_pci_alloc(struct bnx2x *bp) { mutex_init(&bp->vf2pf_mutex); @@ -2915,10 +2923,7 @@ int bnx2x_vf_pci_alloc(struct bnx2x *bp) return 0; alloc_mem_err: - BNX2X_PCI_FREE(bp->vf2pf_mbox, bp->vf2pf_mbox_mapping, - sizeof(struct bnx2x_vf_mbx_msg)); - BNX2X_PCI_FREE(bp->vf2pf_mbox, bp->pf2vf_bulletin_mapping, - sizeof(union pf_vf_bulletin)); + bnx2x_vf_pci_dealloc(bp); return -ENOMEM; } diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.h b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.h index 8bf764570eef..bb16c4b5c2af 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.h +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.h @@ -502,6 +502,7 @@ static inline int bnx2x_vf_ustorm_prods_offset(struct bnx2x *bp, enum sample_bulletin_result bnx2x_sample_bulletin(struct bnx2x *bp); void bnx2x_timer_sriov(struct bnx2x *bp); void __iomem *bnx2x_vf_doorbells(struct bnx2x *bp); +void bnx2x_vf_pci_dealloc(struct bnx2x *bp); int bnx2x_vf_pci_alloc(struct bnx2x *bp); int bnx2x_enable_sriov(struct bnx2x *bp); void bnx2x_disable_sriov(struct bnx2x *bp); @@ -568,6 +569,7 @@ static inline void __iomem *bnx2x_vf_doorbells(struct bnx2x *bp) return NULL; } +static inline void bnx2x_vf_pci_dealloc(struct bnx2 *bp) {return 0; } static inline int bnx2x_vf_pci_alloc(struct bnx2x *bp) {return 0; } static inline void bnx2x_pf_set_vfs_vlan(struct bnx2x *bp) {} static inline int bnx2x_sriov_configure(struct pci_dev *dev, int num_vfs) {return 0; } -- cgit v1.2.1 From 1a3d94240bc5e969e7e8cef661fbad24296ba36f Mon Sep 17 00:00:00 2001 From: Yuval Mintz Date: Thu, 24 Apr 2014 19:29:53 +0300 Subject: bnx2x: Fix vlan credit issues for VFs Starting with commit 2dc33bbc "bnx2x: Remove the sriov VFOP mechanism", the bnx2x started enforcing vlan credits for all vlan configurations. This exposed 2 issues: - Vlan credits are not returned once a VF is removed; this causes a leak of credits, and eventually will lead to VFs with no vlan credits. - A vlan credit must be set aside for the Hypervisor to use, and should not be visible to the VF. Although linux VFs at the moment do not support vlan configuration [from the VF side] which causes them to be resilient to this sort of issue, Windows VF over linux hypervisors might fail to load as the vlan credits become depleted. Signed-off-by: Yuval Mintz Signed-off-by: Ariel Elior Signed-off-by: David S. Miller --- drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.c | 44 +++++++++++++++++------ drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.h | 2 ++ drivers/net/ethernet/broadcom/bnx2x/bnx2x_vfpf.c | 2 +- 3 files changed, 37 insertions(+), 11 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.c index 046c9cca0072..eefe8f528309 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.c +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.c @@ -427,7 +427,9 @@ static int bnx2x_vf_mac_vlan_config(struct bnx2x *bp, if (filter->add && filter->type == BNX2X_VF_FILTER_VLAN && (atomic_read(&bnx2x_vfq(vf, qid, vlan_count)) >= vf_vlan_rules_cnt(vf))) { - BNX2X_ERR("No credits for vlan\n"); + BNX2X_ERR("No credits for vlan [%d >= %d]\n", + atomic_read(&bnx2x_vfq(vf, qid, vlan_count)), + vf_vlan_rules_cnt(vf)); return -ENOMEM; } @@ -837,6 +839,29 @@ int bnx2x_vf_flr_clnup_epilog(struct bnx2x *bp, u8 abs_vfid) return 0; } +static void bnx2x_iov_re_set_vlan_filters(struct bnx2x *bp, + struct bnx2x_virtf *vf, + int new) +{ + int num = vf_vlan_rules_cnt(vf); + int diff = new - num; + bool rc = true; + + DP(BNX2X_MSG_IOV, "vf[%d] - %d vlan filter credits [previously %d]\n", + vf->abs_vfid, new, num); + + if (diff > 0) + rc = bp->vlans_pool.get(&bp->vlans_pool, diff); + else if (diff < 0) + rc = bp->vlans_pool.put(&bp->vlans_pool, -diff); + + if (rc) + vf_vlan_rules_cnt(vf) = new; + else + DP(BNX2X_MSG_IOV, "vf[%d] - Failed to configure vlan filter credits change\n", + vf->abs_vfid); +} + /* must be called after the number of PF queues and the number of VFs are * both known */ @@ -854,9 +879,11 @@ bnx2x_iov_static_resc(struct bnx2x *bp, struct bnx2x_virtf *vf) resc->num_mac_filters = 1; /* divvy up vlan rules */ + bnx2x_iov_re_set_vlan_filters(bp, vf, 0); vlan_count = bp->vlans_pool.check(&bp->vlans_pool); vlan_count = 1 << ilog2(vlan_count); - resc->num_vlan_filters = vlan_count / BNX2X_NR_VIRTFN(bp); + bnx2x_iov_re_set_vlan_filters(bp, vf, + vlan_count / BNX2X_NR_VIRTFN(bp)); /* no real limitation */ resc->num_mc_filters = 0; @@ -1478,10 +1505,6 @@ int bnx2x_iov_nic_init(struct bnx2x *bp) bnx2x_iov_static_resc(bp, vf); /* queues are initialized during VF-ACQUIRE */ - - /* reserve the vf vlan credit */ - bp->vlans_pool.get(&bp->vlans_pool, vf_vlan_rules_cnt(vf)); - vf->filter_state = 0; vf->sp_cl_id = bnx2x_fp(bp, 0, cl_id); @@ -1912,11 +1935,12 @@ int bnx2x_vf_chk_avail_resc(struct bnx2x *bp, struct bnx2x_virtf *vf, u8 rxq_cnt = vf_rxq_count(vf) ? : bnx2x_vf_max_queue_cnt(bp, vf); u8 txq_cnt = vf_txq_count(vf) ? : bnx2x_vf_max_queue_cnt(bp, vf); + /* Save a vlan filter for the Hypervisor */ return ((req_resc->num_rxqs <= rxq_cnt) && (req_resc->num_txqs <= txq_cnt) && (req_resc->num_sbs <= vf_sb_count(vf)) && (req_resc->num_mac_filters <= vf_mac_rules_cnt(vf)) && - (req_resc->num_vlan_filters <= vf_vlan_rules_cnt(vf))); + (req_resc->num_vlan_filters <= vf_vlan_rules_visible_cnt(vf))); } /* CORE VF API */ @@ -1972,14 +1996,14 @@ int bnx2x_vf_acquire(struct bnx2x *bp, struct bnx2x_virtf *vf, vf_txq_count(vf) = resc->num_txqs ? : bnx2x_vf_max_queue_cnt(bp, vf); if (resc->num_mac_filters) vf_mac_rules_cnt(vf) = resc->num_mac_filters; - if (resc->num_vlan_filters) - vf_vlan_rules_cnt(vf) = resc->num_vlan_filters; + /* Add an additional vlan filter credit for the hypervisor */ + bnx2x_iov_re_set_vlan_filters(bp, vf, resc->num_vlan_filters + 1); DP(BNX2X_MSG_IOV, "Fulfilling vf request: sb count %d, tx_count %d, rx_count %d, mac_rules_count %d, vlan_rules_count %d\n", vf_sb_count(vf), vf_rxq_count(vf), vf_txq_count(vf), vf_mac_rules_cnt(vf), - vf_vlan_rules_cnt(vf)); + vf_vlan_rules_visible_cnt(vf)); /* Initialize the queues */ if (!vf->vfqs) { diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.h b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.h index bb16c4b5c2af..6929adba52f9 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.h +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.h @@ -159,6 +159,8 @@ struct bnx2x_virtf { #define vf_mac_rules_cnt(vf) ((vf)->alloc_resc.num_mac_filters) #define vf_vlan_rules_cnt(vf) ((vf)->alloc_resc.num_vlan_filters) #define vf_mc_rules_cnt(vf) ((vf)->alloc_resc.num_mc_filters) + /* Hide a single vlan filter credit for the hypervisor */ +#define vf_vlan_rules_visible_cnt(vf) (vf_vlan_rules_cnt(vf) - 1) u8 sb_count; /* actual number of SBs */ u8 igu_base_id; /* base igu status block id */ diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_vfpf.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_vfpf.c index 0622884596b2..0c067e8564dd 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_vfpf.c +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_vfpf.c @@ -1163,7 +1163,7 @@ static void bnx2x_vf_mbx_acquire_resp(struct bnx2x *bp, struct bnx2x_virtf *vf, bnx2x_vf_max_queue_cnt(bp, vf); resc->num_sbs = vf_sb_count(vf); resc->num_mac_filters = vf_mac_rules_cnt(vf); - resc->num_vlan_filters = vf_vlan_rules_cnt(vf); + resc->num_vlan_filters = vf_vlan_rules_visible_cnt(vf); resc->num_mc_filters = 0; if (status == PFVF_STATUS_SUCCESS) { -- cgit v1.2.1 From ab15f86b8d3c3e7a1437010bb57ea543fc422463 Mon Sep 17 00:00:00 2001 From: Narender Kumar Date: Thu, 24 Apr 2014 19:29:54 +0300 Subject: bnx2x: Fix failure to configure VF multicast filters Commit 2dc33bbc "bnx2x: Remove the sriov VFOP mechanism" caused a regression, preventing VFs from configuring multicast filters. Signed-off-by: Naredner Kumar Signed-off-by: Yuval Mintz Signed-off-by: Ariel Elior Signed-off-by: David S. Miller --- drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.c index eefe8f528309..81cc2d9831c2 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.c +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.c @@ -612,6 +612,7 @@ int bnx2x_vf_mcast(struct bnx2x *bp, struct bnx2x_virtf *vf, } /* add new mcasts */ + mcast.mcast_list_len = mc_num; rc = bnx2x_config_mcast(bp, &mcast, BNX2X_MCAST_CMD_ADD); if (rc) BNX2X_ERR("Faled to add multicasts\n"); -- cgit v1.2.1 From 37c0ffaad21401eacc6618a121cc2c501131026f Mon Sep 17 00:00:00 2001 From: Vince Bridgers Date: Thu, 24 Apr 2014 16:58:08 -0500 Subject: Altera TSE: Work around unaligned DMA receive packet issue with Altera SGDMA This patch works around a recently discovered unaligned receive dma problem with the Altera SGMDA. The Altera SGDMA component cannot be configured to DMA data to unaligned addresses for receive packet operations from the Triple Speed Ethernet component because of a potential data transfer corruption that can occur. This patch addresses this issue by utilizing the shift 16 bits feature of the Altera Triple Speed Ethernet component and modifying the receive buffer physical addresses accordingly such that the target receive DMA address is always aligned on a 32-bit boundary. Signed-off-by: Vince Bridgers Tested-by: Matthew Gerlach Signed-off-by: David S. Miller --- drivers/net/ethernet/altera/altera_msgdma.c | 7 +- drivers/net/ethernet/altera/altera_msgdma.h | 3 +- drivers/net/ethernet/altera/altera_sgdma.c | 105 +++++++++++++++++--------- drivers/net/ethernet/altera/altera_sgdma.h | 3 +- drivers/net/ethernet/altera/altera_tse.h | 4 +- drivers/net/ethernet/altera/altera_tse_main.c | 30 +++++--- 6 files changed, 101 insertions(+), 51 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/altera/altera_msgdma.c b/drivers/net/ethernet/altera/altera_msgdma.c index 3df18669ea30..219a8a1e7ba0 100644 --- a/drivers/net/ethernet/altera/altera_msgdma.c +++ b/drivers/net/ethernet/altera/altera_msgdma.c @@ -29,6 +29,10 @@ void msgdma_uninitialize(struct altera_tse_private *priv) { } +void msgdma_start_rxdma(struct altera_tse_private *priv) +{ +} + void msgdma_reset(struct altera_tse_private *priv) { int counter; @@ -154,7 +158,7 @@ u32 msgdma_tx_completions(struct altera_tse_private *priv) /* Put buffer to the mSGDMA RX FIFO */ -int msgdma_add_rx_desc(struct altera_tse_private *priv, +void msgdma_add_rx_desc(struct altera_tse_private *priv, struct tse_buffer *rxbuffer) { struct msgdma_extended_desc *desc = priv->rx_dma_desc; @@ -175,7 +179,6 @@ int msgdma_add_rx_desc(struct altera_tse_private *priv, iowrite32(0, &desc->burst_seq_num); iowrite32(0x00010001, &desc->stride); iowrite32(control, &desc->control); - return 1; } /* status is returned on upper 16 bits, diff --git a/drivers/net/ethernet/altera/altera_msgdma.h b/drivers/net/ethernet/altera/altera_msgdma.h index 7f0f5bf2bba2..42cf61c81057 100644 --- a/drivers/net/ethernet/altera/altera_msgdma.h +++ b/drivers/net/ethernet/altera/altera_msgdma.h @@ -25,10 +25,11 @@ void msgdma_disable_txirq(struct altera_tse_private *); void msgdma_clear_rxirq(struct altera_tse_private *); void msgdma_clear_txirq(struct altera_tse_private *); u32 msgdma_tx_completions(struct altera_tse_private *); -int msgdma_add_rx_desc(struct altera_tse_private *, struct tse_buffer *); +void msgdma_add_rx_desc(struct altera_tse_private *, struct tse_buffer *); int msgdma_tx_buffer(struct altera_tse_private *, struct tse_buffer *); u32 msgdma_rx_status(struct altera_tse_private *); int msgdma_initialize(struct altera_tse_private *); void msgdma_uninitialize(struct altera_tse_private *); +void msgdma_start_rxdma(struct altera_tse_private *); #endif /* __ALTERA_MSGDMA_H__ */ diff --git a/drivers/net/ethernet/altera/altera_sgdma.c b/drivers/net/ethernet/altera/altera_sgdma.c index 0ee96639ae44..4bcdd34f5d24 100644 --- a/drivers/net/ethernet/altera/altera_sgdma.c +++ b/drivers/net/ethernet/altera/altera_sgdma.c @@ -64,11 +64,15 @@ queue_rx_peekhead(struct altera_tse_private *priv); int sgdma_initialize(struct altera_tse_private *priv) { - priv->txctrlreg = SGDMA_CTRLREG_ILASTD; + priv->txctrlreg = SGDMA_CTRLREG_ILASTD | + SGDMA_CTRLREG_INTEN; priv->rxctrlreg = SGDMA_CTRLREG_IDESCRIP | + SGDMA_CTRLREG_INTEN | SGDMA_CTRLREG_ILASTD; + priv->sgdmadesclen = sizeof(sgdma_descrip); + INIT_LIST_HEAD(&priv->txlisthd); INIT_LIST_HEAD(&priv->rxlisthd); @@ -93,6 +97,16 @@ int sgdma_initialize(struct altera_tse_private *priv) return -EINVAL; } + /* Initialize descriptor memory to all 0's, sync memory to cache */ + memset(priv->tx_dma_desc, 0, priv->txdescmem); + memset(priv->rx_dma_desc, 0, priv->rxdescmem); + + dma_sync_single_for_device(priv->device, priv->txdescphys, + priv->txdescmem, DMA_TO_DEVICE); + + dma_sync_single_for_device(priv->device, priv->rxdescphys, + priv->rxdescmem, DMA_TO_DEVICE); + return 0; } @@ -130,26 +144,23 @@ void sgdma_reset(struct altera_tse_private *priv) iowrite32(0, &prxsgdma->control); } +/* For SGDMA, interrupts remain enabled after initially enabling, + * so no need to provide implementations for abstract enable + * and disable + */ + void sgdma_enable_rxirq(struct altera_tse_private *priv) { - struct sgdma_csr *csr = (struct sgdma_csr *)priv->rx_dma_csr; - priv->rxctrlreg |= SGDMA_CTRLREG_INTEN; - tse_set_bit(&csr->control, SGDMA_CTRLREG_INTEN); } void sgdma_enable_txirq(struct altera_tse_private *priv) { - struct sgdma_csr *csr = (struct sgdma_csr *)priv->tx_dma_csr; - priv->txctrlreg |= SGDMA_CTRLREG_INTEN; - tse_set_bit(&csr->control, SGDMA_CTRLREG_INTEN); } -/* for SGDMA, RX interrupts remain enabled after enabling */ void sgdma_disable_rxirq(struct altera_tse_private *priv) { } -/* for SGDMA, TX interrupts remain enabled after enabling */ void sgdma_disable_txirq(struct altera_tse_private *priv) { } @@ -219,11 +230,15 @@ u32 sgdma_tx_completions(struct altera_tse_private *priv) return ready; } -int sgdma_add_rx_desc(struct altera_tse_private *priv, - struct tse_buffer *rxbuffer) +void sgdma_start_rxdma(struct altera_tse_private *priv) +{ + sgdma_async_read(priv); +} + +void sgdma_add_rx_desc(struct altera_tse_private *priv, + struct tse_buffer *rxbuffer) { queue_rx(priv, rxbuffer); - return sgdma_async_read(priv); } /* status is returned on upper 16 bits, @@ -240,28 +255,52 @@ u32 sgdma_rx_status(struct altera_tse_private *priv) unsigned int pktstatus = 0; struct tse_buffer *rxbuffer = NULL; - dma_sync_single_for_cpu(priv->device, - priv->rxdescphys, - priv->rxdescmem, - DMA_BIDIRECTIONAL); + u32 sts = ioread32(&csr->status); desc = &base[0]; - if ((ioread32(&csr->status) & SGDMA_STSREG_EOP) || - (desc->status & SGDMA_STATUS_EOP)) { + if (sts & SGDMA_STSREG_EOP) { + dma_sync_single_for_cpu(priv->device, + priv->rxdescphys, + priv->sgdmadesclen, + DMA_FROM_DEVICE); + pktlength = desc->bytes_xferred; pktstatus = desc->status & 0x3f; rxstatus = pktstatus; rxstatus = rxstatus << 16; rxstatus |= (pktlength & 0xffff); - desc->status = 0; + if (rxstatus) { + desc->status = 0; - rxbuffer = dequeue_rx(priv); - if (rxbuffer == NULL) - netdev_err(priv->dev, - "sgdma rx and rx queue empty!\n"); + rxbuffer = dequeue_rx(priv); + if (rxbuffer == NULL) + netdev_info(priv->dev, + "sgdma rx and rx queue empty!\n"); + + /* Clear control */ + iowrite32(0, &csr->control); + /* clear status */ + iowrite32(0xf, &csr->status); - /* kick the rx sgdma after reaping this descriptor */ + /* kick the rx sgdma after reaping this descriptor */ + pktsrx = sgdma_async_read(priv); + + } else { + /* If the SGDMA indicated an end of packet on recv, + * then it's expected that the rxstatus from the + * descriptor is non-zero - meaning a valid packet + * with a nonzero length, or an error has been + * indicated. if not, then all we can do is signal + * an error and return no packet received. Most likely + * there is a system design error, or an error in the + * underlying kernel (cache or cache management problem) + */ + netdev_err(priv->dev, + "SGDMA RX Error Info: %x, %x, %x\n", + sts, desc->status, rxstatus); + } + } else if (sts == 0) { pktsrx = sgdma_async_read(priv); } @@ -319,13 +358,14 @@ static int sgdma_async_read(struct altera_tse_private *priv) struct sgdma_descrip *cdesc = &descbase[0]; struct sgdma_descrip *ndesc = &descbase[1]; - unsigned int sts = ioread32(&csr->status); struct tse_buffer *rxbuffer = NULL; if (!sgdma_rxbusy(priv)) { rxbuffer = queue_rx_peekhead(priv); - if (rxbuffer == NULL) + if (rxbuffer == NULL) { + netdev_err(priv->dev, "no rx buffers available\n"); return 0; + } sgdma_descrip(cdesc, /* current descriptor */ ndesc, /* next descriptor */ @@ -337,17 +377,10 @@ static int sgdma_async_read(struct altera_tse_private *priv) 0, /* read fixed: NA for rx dma */ 0); /* SOP: NA for rx DMA */ - /* clear control and status */ - iowrite32(0, &csr->control); - - /* If status available, clear those bits */ - if (sts & 0xf) - iowrite32(0xf, &csr->status); - dma_sync_single_for_device(priv->device, priv->rxdescphys, - priv->rxdescmem, - DMA_BIDIRECTIONAL); + priv->sgdmadesclen, + DMA_TO_DEVICE); iowrite32(lower_32_bits(sgdma_rxphysaddr(priv, cdesc)), &csr->next_descrip); @@ -374,7 +407,7 @@ static int sgdma_async_write(struct altera_tse_private *priv, iowrite32(0x1f, &csr->status); dma_sync_single_for_device(priv->device, priv->txdescphys, - priv->txdescmem, DMA_TO_DEVICE); + priv->sgdmadesclen, DMA_TO_DEVICE); iowrite32(lower_32_bits(sgdma_txphysaddr(priv, desc)), &csr->next_descrip); diff --git a/drivers/net/ethernet/altera/altera_sgdma.h b/drivers/net/ethernet/altera/altera_sgdma.h index 07d471729dc4..584977e29ef9 100644 --- a/drivers/net/ethernet/altera/altera_sgdma.h +++ b/drivers/net/ethernet/altera/altera_sgdma.h @@ -26,10 +26,11 @@ void sgdma_clear_rxirq(struct altera_tse_private *); void sgdma_clear_txirq(struct altera_tse_private *); int sgdma_tx_buffer(struct altera_tse_private *priv, struct tse_buffer *); u32 sgdma_tx_completions(struct altera_tse_private *); -int sgdma_add_rx_desc(struct altera_tse_private *priv, struct tse_buffer *); +void sgdma_add_rx_desc(struct altera_tse_private *priv, struct tse_buffer *); void sgdma_status(struct altera_tse_private *); u32 sgdma_rx_status(struct altera_tse_private *); int sgdma_initialize(struct altera_tse_private *); void sgdma_uninitialize(struct altera_tse_private *); +void sgdma_start_rxdma(struct altera_tse_private *); #endif /* __ALTERA_SGDMA_H__ */ diff --git a/drivers/net/ethernet/altera/altera_tse.h b/drivers/net/ethernet/altera/altera_tse.h index 8feeed05de0e..6059a09bb8ae 100644 --- a/drivers/net/ethernet/altera/altera_tse.h +++ b/drivers/net/ethernet/altera/altera_tse.h @@ -390,10 +390,11 @@ struct altera_dmaops { void (*clear_rxirq)(struct altera_tse_private *); int (*tx_buffer)(struct altera_tse_private *, struct tse_buffer *); u32 (*tx_completions)(struct altera_tse_private *); - int (*add_rx_desc)(struct altera_tse_private *, struct tse_buffer *); + void (*add_rx_desc)(struct altera_tse_private *, struct tse_buffer *); u32 (*get_rx_status)(struct altera_tse_private *); int (*init_dma)(struct altera_tse_private *); void (*uninit_dma)(struct altera_tse_private *); + void (*start_rxdma)(struct altera_tse_private *); }; /* This structure is private to each device. @@ -453,6 +454,7 @@ struct altera_tse_private { u32 rxctrlreg; dma_addr_t rxdescphys; dma_addr_t txdescphys; + size_t sgdmadesclen; struct list_head txlisthd; struct list_head rxlisthd; diff --git a/drivers/net/ethernet/altera/altera_tse_main.c b/drivers/net/ethernet/altera/altera_tse_main.c index c70a29e0b9f7..dabba5ed67bd 100644 --- a/drivers/net/ethernet/altera/altera_tse_main.c +++ b/drivers/net/ethernet/altera/altera_tse_main.c @@ -224,6 +224,7 @@ static int tse_init_rx_buffer(struct altera_tse_private *priv, dev_kfree_skb_any(rxbuffer->skb); return -EINVAL; } + rxbuffer->dma_addr &= (dma_addr_t)~3; rxbuffer->len = len; return 0; } @@ -425,9 +426,10 @@ static int tse_rx(struct altera_tse_private *priv, int limit) priv->dev->stats.rx_bytes += pktlength; entry = next_entry; + + tse_rx_refill(priv); } - tse_rx_refill(priv); return count; } @@ -520,7 +522,6 @@ static irqreturn_t altera_isr(int irq, void *dev_id) struct altera_tse_private *priv; unsigned long int flags; - if (unlikely(!dev)) { pr_err("%s: invalid dev pointer\n", __func__); return IRQ_NONE; @@ -868,13 +869,13 @@ static int init_mac(struct altera_tse_private *priv) /* Disable RX/TX shift 16 for alignment of all received frames on 16-bit * start address */ - tse_clear_bit(&mac->rx_cmd_stat, ALTERA_TSE_RX_CMD_STAT_RX_SHIFT16); + tse_set_bit(&mac->rx_cmd_stat, ALTERA_TSE_RX_CMD_STAT_RX_SHIFT16); tse_clear_bit(&mac->tx_cmd_stat, ALTERA_TSE_TX_CMD_STAT_TX_SHIFT16 | ALTERA_TSE_TX_CMD_STAT_OMIT_CRC); /* Set the MAC options */ cmd = ioread32(&mac->command_config); - cmd |= MAC_CMDCFG_PAD_EN; /* Padding Removal on Receive */ + cmd &= ~MAC_CMDCFG_PAD_EN; /* No padding Removal on Receive */ cmd &= ~MAC_CMDCFG_CRC_FWD; /* CRC Removal */ cmd |= MAC_CMDCFG_RX_ERR_DISC; /* Automatically discard frames * with CRC errors @@ -882,6 +883,12 @@ static int init_mac(struct altera_tse_private *priv) cmd |= MAC_CMDCFG_CNTL_FRM_ENA; cmd &= ~MAC_CMDCFG_TX_ENA; cmd &= ~MAC_CMDCFG_RX_ENA; + + /* Default speed and duplex setting, full/100 */ + cmd &= ~MAC_CMDCFG_HD_ENA; + cmd &= ~MAC_CMDCFG_ETH_SPEED; + cmd &= ~MAC_CMDCFG_ENA_10; + iowrite32(cmd, &mac->command_config); if (netif_msg_hw(priv)) @@ -1085,17 +1092,19 @@ static int tse_open(struct net_device *dev) spin_unlock_irqrestore(&priv->rxdma_irq_lock, flags); - /* Start MAC Rx/Tx */ - spin_lock(&priv->mac_cfg_lock); - tse_set_mac(priv, true); - spin_unlock(&priv->mac_cfg_lock); - if (priv->phydev) phy_start(priv->phydev); napi_enable(&priv->napi); netif_start_queue(dev); + priv->dmaops->start_rxdma(priv); + + /* Start MAC Rx/Tx */ + spin_lock(&priv->mac_cfg_lock); + tse_set_mac(priv, true); + spin_unlock(&priv->mac_cfg_lock); + return 0; tx_request_irq_error: @@ -1167,7 +1176,6 @@ static struct net_device_ops altera_tse_netdev_ops = { .ndo_validate_addr = eth_validate_addr, }; - static int request_and_map(struct platform_device *pdev, const char *name, struct resource **res, void __iomem **ptr) { @@ -1496,6 +1504,7 @@ struct altera_dmaops altera_dtype_sgdma = { .get_rx_status = sgdma_rx_status, .init_dma = sgdma_initialize, .uninit_dma = sgdma_uninitialize, + .start_rxdma = sgdma_start_rxdma, }; struct altera_dmaops altera_dtype_msgdma = { @@ -1514,6 +1523,7 @@ struct altera_dmaops altera_dtype_msgdma = { .get_rx_status = msgdma_rx_status, .init_dma = msgdma_initialize, .uninit_dma = msgdma_uninitialize, + .start_rxdma = msgdma_start_rxdma, }; static struct of_device_id altera_tse_ids[] = { -- cgit v1.2.1 From 5aec4ee3724ad93ee63cafc6f6b5f9cd40adda52 Mon Sep 17 00:00:00 2001 From: Vince Bridgers Date: Thu, 24 Apr 2014 16:58:09 -0500 Subject: Altera TSE: Set the Pause Quanta value to the IEEE default value This patch initializes the pause quanta set for transmitted pause frames to the IEEE specified default of 0xffff. Signed-off-by: Vince Bridgers Signed-off-by: David S. Miller --- drivers/net/ethernet/altera/altera_tse.h | 2 ++ drivers/net/ethernet/altera/altera_tse_main.c | 2 ++ 2 files changed, 4 insertions(+) (limited to 'drivers') diff --git a/drivers/net/ethernet/altera/altera_tse.h b/drivers/net/ethernet/altera/altera_tse.h index 6059a09bb8ae..465c4aabebbd 100644 --- a/drivers/net/ethernet/altera/altera_tse.h +++ b/drivers/net/ethernet/altera/altera_tse.h @@ -58,6 +58,8 @@ /* MAC function configuration default settings */ #define ALTERA_TSE_TX_IPG_LENGTH 12 +#define ALTERA_TSE_PAUSE_QUANTA 0xffff + #define GET_BIT_VALUE(v, bit) (((v) >> (bit)) & 0x1) /* MAC Command_Config Register Bit Definitions diff --git a/drivers/net/ethernet/altera/altera_tse_main.c b/drivers/net/ethernet/altera/altera_tse_main.c index dabba5ed67bd..63712830b333 100644 --- a/drivers/net/ethernet/altera/altera_tse_main.c +++ b/drivers/net/ethernet/altera/altera_tse_main.c @@ -891,6 +891,8 @@ static int init_mac(struct altera_tse_private *priv) iowrite32(cmd, &mac->command_config); + iowrite32(ALTERA_TSE_PAUSE_QUANTA, &mac->pause_quanta); + if (netif_msg_hw(priv)) dev_dbg(priv->device, "MAC post-initialization: CMD_CONFIG = 0x%08x\n", cmd); -- cgit v1.2.1 From a76420092d3d9f2e52ad7469c210c0e2fa962fe4 Mon Sep 17 00:00:00 2001 From: Vince Bridgers Date: Thu, 24 Apr 2014 16:58:10 -0500 Subject: Altera TSE: Fix Panic in probe routine when phy probe fails This patch addresses a fault in the error recovery path of the probe routine where the netdev structure was not being unregistered properly leading to a panic only when the phy probe failed. Abbreviated panic stack seen is as follows: (free_netdev+0xXX) from (altera_tse_probe+0xXX) (altera_tse_probe+0xXX) from (platform_drv_probe+0xXX) (platform_drv_probe+0xXX) from (driver_probe_device+0xXX) (driver_probe_device+0xXX) from (__driver_attach+0xXX) (__driver_attach+0xXX) from (bus_for_each_dev+0xXX) (bus_for_each_dev+0xXX) from (driver_attach+0xXX) (driver_attach+0xXX) from (bus_add_driver+0xXX) (bus_add_driver+0xXX) from (driver_register+0xXX) (driver_register+0xXX) from (__platform_driver_register+0xXX) (__platform_driver_register+0xXX) from (altera_tse_driver_init+0xXX) (altera_tse_driver_init+0xXX) from (do_one_initcall+0xXX) (do_one_initcall+0xXX) from (kernel_init_freeable+0xXX) (kernel_init_freeable+0xXX) from (kernel_init+0xXX) (kernel_init+0xXX) from (ret_from_fork+0xXX) Signed-off-by: Vince Bridgers Signed-off-by: David S. Miller --- drivers/net/ethernet/altera/altera_tse_main.c | 45 ++++++++++++++------------- 1 file changed, 24 insertions(+), 21 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/altera/altera_tse_main.c b/drivers/net/ethernet/altera/altera_tse_main.c index 63712830b333..e44a4aeb9701 100644 --- a/drivers/net/ethernet/altera/altera_tse_main.c +++ b/drivers/net/ethernet/altera/altera_tse_main.c @@ -1245,7 +1245,7 @@ static int altera_tse_probe(struct platform_device *pdev) /* Get the mapped address to the SGDMA descriptor memory */ ret = request_and_map(pdev, "s1", &dma_res, &descmap); if (ret) - goto out_free; + goto err_free_netdev; /* Start of that memory is for transmit descriptors */ priv->tx_dma_desc = descmap; @@ -1264,24 +1264,24 @@ static int altera_tse_probe(struct platform_device *pdev) if (upper_32_bits(priv->rxdescmem_busaddr)) { dev_dbg(priv->device, "SGDMA bus addresses greater than 32-bits\n"); - goto out_free; + goto err_free_netdev; } if (upper_32_bits(priv->txdescmem_busaddr)) { dev_dbg(priv->device, "SGDMA bus addresses greater than 32-bits\n"); - goto out_free; + goto err_free_netdev; } } else if (priv->dmaops && priv->dmaops->altera_dtype == ALTERA_DTYPE_MSGDMA) { ret = request_and_map(pdev, "rx_resp", &dma_res, &priv->rx_dma_resp); if (ret) - goto out_free; + goto err_free_netdev; ret = request_and_map(pdev, "tx_desc", &dma_res, &priv->tx_dma_desc); if (ret) - goto out_free; + goto err_free_netdev; priv->txdescmem = resource_size(dma_res); priv->txdescmem_busaddr = dma_res->start; @@ -1289,13 +1289,13 @@ static int altera_tse_probe(struct platform_device *pdev) ret = request_and_map(pdev, "rx_desc", &dma_res, &priv->rx_dma_desc); if (ret) - goto out_free; + goto err_free_netdev; priv->rxdescmem = resource_size(dma_res); priv->rxdescmem_busaddr = dma_res->start; } else { - goto out_free; + goto err_free_netdev; } if (!dma_set_mask(priv->device, DMA_BIT_MASK(priv->dmaops->dmamask))) @@ -1304,26 +1304,26 @@ static int altera_tse_probe(struct platform_device *pdev) else if (!dma_set_mask(priv->device, DMA_BIT_MASK(32))) dma_set_coherent_mask(priv->device, DMA_BIT_MASK(32)); else - goto out_free; + goto err_free_netdev; /* MAC address space */ ret = request_and_map(pdev, "control_port", &control_port, (void __iomem **)&priv->mac_dev); if (ret) - goto out_free; + goto err_free_netdev; /* xSGDMA Rx Dispatcher address space */ ret = request_and_map(pdev, "rx_csr", &dma_res, &priv->rx_dma_csr); if (ret) - goto out_free; + goto err_free_netdev; /* xSGDMA Tx Dispatcher address space */ ret = request_and_map(pdev, "tx_csr", &dma_res, &priv->tx_dma_csr); if (ret) - goto out_free; + goto err_free_netdev; /* Rx IRQ */ @@ -1331,7 +1331,7 @@ static int altera_tse_probe(struct platform_device *pdev) if (priv->rx_irq == -ENXIO) { dev_err(&pdev->dev, "cannot obtain Rx IRQ\n"); ret = -ENXIO; - goto out_free; + goto err_free_netdev; } /* Tx IRQ */ @@ -1339,7 +1339,7 @@ static int altera_tse_probe(struct platform_device *pdev) if (priv->tx_irq == -ENXIO) { dev_err(&pdev->dev, "cannot obtain Tx IRQ\n"); ret = -ENXIO; - goto out_free; + goto err_free_netdev; } /* get FIFO depths from device tree */ @@ -1347,14 +1347,14 @@ static int altera_tse_probe(struct platform_device *pdev) &priv->rx_fifo_depth)) { dev_err(&pdev->dev, "cannot obtain rx-fifo-depth\n"); ret = -ENXIO; - goto out_free; + goto err_free_netdev; } if (of_property_read_u32(pdev->dev.of_node, "tx-fifo-depth", &priv->rx_fifo_depth)) { dev_err(&pdev->dev, "cannot obtain tx-fifo-depth\n"); ret = -ENXIO; - goto out_free; + goto err_free_netdev; } /* get hash filter settings for this instance */ @@ -1403,7 +1403,7 @@ static int altera_tse_probe(struct platform_device *pdev) ((priv->phy_addr >= 0) && (priv->phy_addr < PHY_MAX_ADDR)))) { dev_err(&pdev->dev, "invalid phy-addr specified %d\n", priv->phy_addr); - goto out_free; + goto err_free_netdev; } /* Create/attach to MDIO bus */ @@ -1411,7 +1411,7 @@ static int altera_tse_probe(struct platform_device *pdev) atomic_add_return(1, &instance_count)); if (ret) - goto out_free; + goto err_free_netdev; /* initialize netdev */ ether_setup(ndev); @@ -1448,7 +1448,7 @@ static int altera_tse_probe(struct platform_device *pdev) ret = register_netdev(ndev); if (ret) { dev_err(&pdev->dev, "failed to register TSE net device\n"); - goto out_free_mdio; + goto err_register_netdev; } platform_set_drvdata(pdev, ndev); @@ -1465,13 +1465,16 @@ static int altera_tse_probe(struct platform_device *pdev) ret = init_phy(ndev); if (ret != 0) { netdev_err(ndev, "Cannot attach to PHY (error: %d)\n", ret); - goto out_free_mdio; + goto err_init_phy; } return 0; -out_free_mdio: +err_init_phy: + unregister_netdev(ndev); +err_register_netdev: + netif_napi_del(&priv->napi); altera_tse_mdio_destroy(ndev); -out_free: +err_free_netdev: free_netdev(ndev); return ret; } -- cgit v1.2.1 From 99514e116c2e297e03a1434eb7e9f4e8fd2a492b Mon Sep 17 00:00:00 2001 From: Vince Bridgers Date: Thu, 24 Apr 2014 16:58:11 -0500 Subject: Altera TSE: Change driver name used by Ethtool This patch changes the name used by Ethtool to something more conventional in preparation for TSE Ethtool register dump support to be added in the near future. Signed-off-by: Vince Bridgers Signed-off-by: David S. Miller --- drivers/net/ethernet/altera/altera_tse_ethtool.c | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/altera/altera_tse_ethtool.c b/drivers/net/ethernet/altera/altera_tse_ethtool.c index 319ca74f5e74..76133caffa78 100644 --- a/drivers/net/ethernet/altera/altera_tse_ethtool.c +++ b/drivers/net/ethernet/altera/altera_tse_ethtool.c @@ -77,7 +77,7 @@ static void tse_get_drvinfo(struct net_device *dev, struct altera_tse_private *priv = netdev_priv(dev); u32 rev = ioread32(&priv->mac_dev->megacore_revision); - strcpy(info->driver, "Altera TSE MAC IP Driver"); + strcpy(info->driver, "altera_tse"); strcpy(info->version, "v8.0"); snprintf(info->fw_version, ETHTOOL_FWVERS_LEN, "v%d.%d", rev & 0xFFFF, (rev & 0xFFFF0000) >> 16); @@ -185,6 +185,12 @@ static void tse_get_regs(struct net_device *dev, struct ethtool_regs *regs, * how to do any special formatting of this data. * This version number will need to change if and * when this register table is changed. + * + * version[31:0] = 1: Dump the first 128 TSE Registers + * Upper bits are all 0 by default + * + * Upper 16-bits will indicate feature presence for + * Ethtool register decoding in future version. */ regs->version = 1; -- cgit v1.2.1 From cafa1fca9de584dcd920629cf075091a7df64bb0 Mon Sep 17 00:00:00 2001 From: Jacob Keller Date: Thu, 24 Apr 2014 18:05:03 -0700 Subject: i40e: fix Timesync Tx interrupt handler code This patch fixes the PTP Tx timestamp interrupt handler. The original code misinterpreted the interrupt handler design. We were clearing the ena_mask bit for the Timesync interrupts. This is done to indicate that the interrupt will be handled in a scheduled work item (instead of immediately) and that work item is responsible for re-enabling the interrupts. However, the Tx timestamp was being handled immediately and nothing was ever re-enabling it. This resulted in a single interrupt working for the life of the driver. This patch fixes the issue by instead clearing the bit from icr0 which is used to indicate that the interrupt was immediately handled and can be re-enabled right away. This patch also clears up a related issue due to writing the PRTTSYN_STAT_0 register, which was unintentionally clearing the cause bits for Timesync interrupts. Change-ID: I057bd70d53c302f60fab78246989cbdfa469d83b Signed-off-by: Jacob Keller Acked-by: Anjali Singhai Jain Acked-by: Shannon Nelson Tested-by: Kavindya Deegala Signed-off-by: Jeff Kirsher Signed-off-by: David S. Miller --- drivers/net/ethernet/intel/i40e/i40e_main.c | 5 +---- 1 file changed, 1 insertion(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/intel/i40e/i40e_main.c b/drivers/net/ethernet/intel/i40e/i40e_main.c index 59eada31e211..cf0761f08911 100644 --- a/drivers/net/ethernet/intel/i40e/i40e_main.c +++ b/drivers/net/ethernet/intel/i40e/i40e_main.c @@ -2897,12 +2897,9 @@ static irqreturn_t i40e_intr(int irq, void *data) u32 prttsyn_stat = rd32(hw, I40E_PRTTSYN_STAT_0); if (prttsyn_stat & I40E_PRTTSYN_STAT_0_TXTIME_MASK) { - ena_mask &= ~I40E_PFINT_ICR0_ENA_TIMESYNC_MASK; + icr0 &= ~I40E_PFINT_ICR0_ENA_TIMESYNC_MASK; i40e_ptp_tx_hwtstamp(pf); - prttsyn_stat &= ~I40E_PRTTSYN_STAT_0_TXTIME_MASK; } - - wr32(hw, I40E_PRTTSYN_STAT_0, prttsyn_stat); } /* If a critical error is pending we have no choice but to reset the -- cgit v1.2.1 From 535cdf3c195ed4125414f6bb780382aed1b4e19c Mon Sep 17 00:00:00 2001 From: Hariprasad Shenai Date: Fri, 25 Apr 2014 18:00:12 +0530 Subject: cxgb4: Update Kconfig to include Chelsio T5 adapter Signed-off-by: Hariprasad Shenai Signed-off-by: David S. Miller --- drivers/net/ethernet/chelsio/Kconfig | 13 +++++++------ 1 file changed, 7 insertions(+), 6 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/chelsio/Kconfig b/drivers/net/ethernet/chelsio/Kconfig index d40c994a4f6a..570222c33410 100644 --- a/drivers/net/ethernet/chelsio/Kconfig +++ b/drivers/net/ethernet/chelsio/Kconfig @@ -67,13 +67,13 @@ config CHELSIO_T3 will be called cxgb3. config CHELSIO_T4 - tristate "Chelsio Communications T4 Ethernet support" + tristate "Chelsio Communications T4/T5 Ethernet support" depends on PCI select FW_LOADER select MDIO ---help--- - This driver supports Chelsio T4-based gigabit and 10Gb Ethernet - adapters. + This driver supports Chelsio T4 and T5 based gigabit, 10Gb Ethernet + adapter and T5 based 40Gb Ethernet adapter. For general information about Chelsio and our products, visit our website at . @@ -87,11 +87,12 @@ config CHELSIO_T4 will be called cxgb4. config CHELSIO_T4VF - tristate "Chelsio Communications T4 Virtual Function Ethernet support" + tristate "Chelsio Communications T4/T5 Virtual Function Ethernet support" depends on PCI ---help--- - This driver supports Chelsio T4-based gigabit and 10Gb Ethernet - adapters with PCI-E SR-IOV Virtual Functions. + This driver supports Chelsio T4 and T5 based gigabit, 10Gb Ethernet + adapters and T5 based 40Gb Ethernet adapters with PCI-E SR-IOV Virtual + Functions. For general information about Chelsio and our products, visit our website at . -- cgit v1.2.1 From 796bec1efbbd3be98d84cd68279c6ec03a4782f9 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Heiko=20St=C3=BCbner?= Date: Fri, 25 Apr 2014 10:03:29 +0200 Subject: arc_emac: fix probe error path The probe function at the moment only frees the netdev but does not disconnect the phy or removes the mdio bus it registered. Signed-off-by: Heiko Stuebner Signed-off-by: David S. Miller --- drivers/net/ethernet/arc/emac_main.c | 23 ++++++++++++++--------- 1 file changed, 14 insertions(+), 9 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/arc/emac_main.c b/drivers/net/ethernet/arc/emac_main.c index 9f45782819ec..9747ddaf6ad2 100644 --- a/drivers/net/ethernet/arc/emac_main.c +++ b/drivers/net/ethernet/arc/emac_main.c @@ -683,7 +683,7 @@ static int arc_emac_probe(struct platform_device *pdev) priv->regs = devm_ioremap_resource(&pdev->dev, &res_regs); if (IS_ERR(priv->regs)) { err = PTR_ERR(priv->regs); - goto out; + goto out_netdev; } dev_dbg(&pdev->dev, "Registers base address is 0x%p\n", priv->regs); @@ -693,7 +693,7 @@ static int arc_emac_probe(struct platform_device *pdev) if (!(id == 0x0005fd02 || id == 0x0007fd02)) { dev_err(&pdev->dev, "ARC EMAC not detected, id=0x%x\n", id); err = -ENODEV; - goto out; + goto out_netdev; } dev_info(&pdev->dev, "ARC EMAC detected with id: 0x%x\n", id); @@ -708,7 +708,7 @@ static int arc_emac_probe(struct platform_device *pdev) ndev->name, ndev); if (err) { dev_err(&pdev->dev, "could not allocate IRQ\n"); - goto out; + goto out_netdev; } /* Get MAC address from device tree */ @@ -729,7 +729,7 @@ static int arc_emac_probe(struct platform_device *pdev) if (!priv->rxbd) { dev_err(&pdev->dev, "failed to allocate data buffers\n"); err = -ENOMEM; - goto out; + goto out_netdev; } priv->txbd = priv->rxbd + RX_BD_NUM; @@ -741,7 +741,7 @@ static int arc_emac_probe(struct platform_device *pdev) err = arc_mdio_probe(pdev, priv); if (err) { dev_err(&pdev->dev, "failed to probe MII bus\n"); - goto out; + goto out_netdev; } priv->phy_dev = of_phy_connect(ndev, phy_node, arc_emac_adjust_link, 0, @@ -749,7 +749,7 @@ static int arc_emac_probe(struct platform_device *pdev) if (!priv->phy_dev) { dev_err(&pdev->dev, "of_phy_connect() failed\n"); err = -ENODEV; - goto out; + goto out_mdio; } dev_info(&pdev->dev, "connected to %s phy with id 0x%x\n", @@ -759,14 +759,19 @@ static int arc_emac_probe(struct platform_device *pdev) err = register_netdev(ndev); if (err) { - netif_napi_del(&priv->napi); dev_err(&pdev->dev, "failed to register network device\n"); - goto out; + goto out_netif_api; } return 0; -out: +out_netif_api: + netif_napi_del(&priv->napi); + phy_disconnect(priv->phy_dev); + priv->phy_dev = NULL; +out_mdio: + arc_mdio_remove(priv); +out_netdev: free_netdev(ndev); return err; } -- cgit v1.2.1 From 88154c96ee2dab84ae78ad41562b4a3a23d83788 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Heiko=20St=C3=BCbner?= Date: Fri, 25 Apr 2014 10:06:13 +0200 Subject: arc_emac: add clock handling This adds ability for the arc_emac to really handle its supplying clock. To get the needed clock-frequency either a real clock or the previous clock-frequency property must be provided. Signed-off-by: Heiko Stuebner Tested-by: Max Schwarz Signed-off-by: David S. Miller --- drivers/net/ethernet/arc/emac.h | 2 ++ drivers/net/ethernet/arc/emac_main.c | 46 +++++++++++++++++++++++++++--------- 2 files changed, 37 insertions(+), 11 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/arc/emac.h b/drivers/net/ethernet/arc/emac.h index 928fac6dd10a..53f85bf71526 100644 --- a/drivers/net/ethernet/arc/emac.h +++ b/drivers/net/ethernet/arc/emac.h @@ -11,6 +11,7 @@ #include #include #include +#include /* STATUS and ENABLE Register bit masks */ #define TXINT_MASK (1<<0) /* Transmit interrupt */ @@ -131,6 +132,7 @@ struct arc_emac_priv { struct mii_bus *bus; void __iomem *regs; + struct clk *clk; struct napi_struct napi; struct net_device_stats stats; diff --git a/drivers/net/ethernet/arc/emac_main.c b/drivers/net/ethernet/arc/emac_main.c index 9747ddaf6ad2..d647a7d115ac 100644 --- a/drivers/net/ethernet/arc/emac_main.c +++ b/drivers/net/ethernet/arc/emac_main.c @@ -649,13 +649,6 @@ static int arc_emac_probe(struct platform_device *pdev) return -ENODEV; } - /* Get CPU clock frequency from device tree */ - if (of_property_read_u32(pdev->dev.of_node, "clock-frequency", - &clock_frequency)) { - dev_err(&pdev->dev, "failed to retrieve from device tree\n"); - return -EINVAL; - } - /* Get IRQ from device tree */ irq = irq_of_parse_and_map(pdev->dev.of_node, 0); if (!irq) { @@ -687,13 +680,32 @@ static int arc_emac_probe(struct platform_device *pdev) } dev_dbg(&pdev->dev, "Registers base address is 0x%p\n", priv->regs); + priv->clk = of_clk_get(pdev->dev.of_node, 0); + if (IS_ERR(priv->clk)) { + /* Get CPU clock frequency from device tree */ + if (of_property_read_u32(pdev->dev.of_node, "clock-frequency", + &clock_frequency)) { + dev_err(&pdev->dev, "failed to retrieve from device tree\n"); + err = -EINVAL; + goto out_netdev; + } + } else { + err = clk_prepare_enable(priv->clk); + if (err) { + dev_err(&pdev->dev, "failed to enable clock\n"); + goto out_clkget; + } + + clock_frequency = clk_get_rate(priv->clk); + } + id = arc_reg_get(priv, R_ID); /* Check for EMAC revision 5 or 7, magic number */ if (!(id == 0x0005fd02 || id == 0x0007fd02)) { dev_err(&pdev->dev, "ARC EMAC not detected, id=0x%x\n", id); err = -ENODEV; - goto out_netdev; + goto out_clken; } dev_info(&pdev->dev, "ARC EMAC detected with id: 0x%x\n", id); @@ -708,7 +720,7 @@ static int arc_emac_probe(struct platform_device *pdev) ndev->name, ndev); if (err) { dev_err(&pdev->dev, "could not allocate IRQ\n"); - goto out_netdev; + goto out_clken; } /* Get MAC address from device tree */ @@ -729,7 +741,7 @@ static int arc_emac_probe(struct platform_device *pdev) if (!priv->rxbd) { dev_err(&pdev->dev, "failed to allocate data buffers\n"); err = -ENOMEM; - goto out_netdev; + goto out_clken; } priv->txbd = priv->rxbd + RX_BD_NUM; @@ -741,7 +753,7 @@ static int arc_emac_probe(struct platform_device *pdev) err = arc_mdio_probe(pdev, priv); if (err) { dev_err(&pdev->dev, "failed to probe MII bus\n"); - goto out_netdev; + goto out_clken; } priv->phy_dev = of_phy_connect(ndev, phy_node, arc_emac_adjust_link, 0, @@ -771,6 +783,12 @@ out_netif_api: priv->phy_dev = NULL; out_mdio: arc_mdio_remove(priv); +out_clken: + if (!IS_ERR(priv->clk)) + clk_disable_unprepare(priv->clk); +out_clkget: + if (!IS_ERR(priv->clk)) + clk_put(priv->clk); out_netdev: free_netdev(ndev); return err; @@ -786,6 +804,12 @@ static int arc_emac_remove(struct platform_device *pdev) arc_mdio_remove(priv); unregister_netdev(ndev); netif_napi_del(&priv->napi); + + if (!IS_ERR(priv->clk)) { + clk_disable_unprepare(priv->clk); + clk_put(priv->clk); + } + free_netdev(ndev); return 0; -- cgit v1.2.1 From b85f5deaf052340021d025e120a9858f084a1d79 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Bj=C3=B8rn=20Mork?= Date: Fri, 25 Apr 2014 19:00:28 +0200 Subject: net: qmi_wwan: add Sierra Wireless EM7355 MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Signed-off-by: Bjørn Mork Signed-off-by: David S. Miller --- drivers/net/usb/qmi_wwan.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/net/usb/qmi_wwan.c b/drivers/net/usb/qmi_wwan.c index e3458e3c44f1..f4c9290aa117 100644 --- a/drivers/net/usb/qmi_wwan.c +++ b/drivers/net/usb/qmi_wwan.c @@ -731,6 +731,7 @@ static const struct usb_device_id products[] = { {QMI_FIXED_INTF(0x1199, 0x68a2, 8)}, /* Sierra Wireless MC7710 in QMI mode */ {QMI_FIXED_INTF(0x1199, 0x68a2, 19)}, /* Sierra Wireless MC7710 in QMI mode */ {QMI_FIXED_INTF(0x1199, 0x901c, 8)}, /* Sierra Wireless EM7700 */ + {QMI_FIXED_INTF(0x1199, 0x901f, 8)}, /* Sierra Wireless EM7355 */ {QMI_FIXED_INTF(0x1199, 0x9051, 8)}, /* Netgear AirCard 340U */ {QMI_FIXED_INTF(0x1bbb, 0x011e, 4)}, /* Telekom Speedstick LTE II (Alcatel One Touch L100V LTE) */ {QMI_FIXED_INTF(0x2357, 0x0201, 4)}, /* TP-LINK HSUPA Modem MA180 */ -- cgit v1.2.1 From 1c138607a7be64074d7fba68d0d533ec38f9d17b Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Bj=C3=B8rn=20Mork?= Date: Fri, 25 Apr 2014 19:00:29 +0200 Subject: net: qmi_wwan: add Sierra Wireless MC73xx MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Signed-off-by: Bjørn Mork Signed-off-by: David S. Miller --- drivers/net/usb/qmi_wwan.c | 3 +++ 1 file changed, 3 insertions(+) (limited to 'drivers') diff --git a/drivers/net/usb/qmi_wwan.c b/drivers/net/usb/qmi_wwan.c index f4c9290aa117..60a95ab243d6 100644 --- a/drivers/net/usb/qmi_wwan.c +++ b/drivers/net/usb/qmi_wwan.c @@ -730,6 +730,9 @@ static const struct usb_device_id products[] = { {QMI_FIXED_INTF(0x114f, 0x68a2, 8)}, /* Sierra Wireless MC7750 */ {QMI_FIXED_INTF(0x1199, 0x68a2, 8)}, /* Sierra Wireless MC7710 in QMI mode */ {QMI_FIXED_INTF(0x1199, 0x68a2, 19)}, /* Sierra Wireless MC7710 in QMI mode */ + {QMI_FIXED_INTF(0x1199, 0x68c0, 8)}, /* Sierra Wireless MC73xx */ + {QMI_FIXED_INTF(0x1199, 0x68c0, 10)}, /* Sierra Wireless MC73xx */ + {QMI_FIXED_INTF(0x1199, 0x68c0, 11)}, /* Sierra Wireless MC73xx */ {QMI_FIXED_INTF(0x1199, 0x901c, 8)}, /* Sierra Wireless EM7700 */ {QMI_FIXED_INTF(0x1199, 0x901f, 8)}, /* Sierra Wireless EM7355 */ {QMI_FIXED_INTF(0x1199, 0x9051, 8)}, /* Netgear AirCard 340U */ -- cgit v1.2.1 From 9214224e43e4264b02686ea8b455f310935607b5 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Bj=C3=B8rn=20Mork?= Date: Fri, 25 Apr 2014 19:00:30 +0200 Subject: net: qmi_wwan: add Sierra Wireless MC7305/MC7355 MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Signed-off-by: Bjørn Mork Signed-off-by: David S. Miller --- drivers/net/usb/qmi_wwan.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/net/usb/qmi_wwan.c b/drivers/net/usb/qmi_wwan.c index 60a95ab243d6..336b5375b00b 100644 --- a/drivers/net/usb/qmi_wwan.c +++ b/drivers/net/usb/qmi_wwan.c @@ -735,6 +735,7 @@ static const struct usb_device_id products[] = { {QMI_FIXED_INTF(0x1199, 0x68c0, 11)}, /* Sierra Wireless MC73xx */ {QMI_FIXED_INTF(0x1199, 0x901c, 8)}, /* Sierra Wireless EM7700 */ {QMI_FIXED_INTF(0x1199, 0x901f, 8)}, /* Sierra Wireless EM7355 */ + {QMI_FIXED_INTF(0x1199, 0x9041, 8)}, /* Sierra Wireless MC7305/MC7355 */ {QMI_FIXED_INTF(0x1199, 0x9051, 8)}, /* Netgear AirCard 340U */ {QMI_FIXED_INTF(0x1bbb, 0x011e, 4)}, /* Telekom Speedstick LTE II (Alcatel One Touch L100V LTE) */ {QMI_FIXED_INTF(0x2357, 0x0201, 4)}, /* TP-LINK HSUPA Modem MA180 */ -- cgit v1.2.1 From efc0b25c3add97717ece57bf5319792ca98f348e Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Bj=C3=B8rn=20Mork?= Date: Fri, 25 Apr 2014 19:00:31 +0200 Subject: net: qmi_wwan: add Olivetti Olicard 500 MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Device interface layout: 0: ff/ff/ff - serial 1: ff/ff/ff - serial AT+PPP 2: 08/06/50 - storage 3: ff/ff/ff - serial 4: ff/ff/ff - QMI/wwan Reported-by: Julio Araujo Signed-off-by: Bjørn Mork Signed-off-by: David S. Miller --- drivers/net/usb/qmi_wwan.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/net/usb/qmi_wwan.c b/drivers/net/usb/qmi_wwan.c index 336b5375b00b..127b745d2e15 100644 --- a/drivers/net/usb/qmi_wwan.c +++ b/drivers/net/usb/qmi_wwan.c @@ -743,6 +743,7 @@ static const struct usb_device_id products[] = { {QMI_FIXED_INTF(0x1bc7, 0x1200, 5)}, /* Telit LE920 */ {QMI_FIXED_INTF(0x1bc7, 0x1201, 2)}, /* Telit LE920 */ {QMI_FIXED_INTF(0x0b3c, 0xc005, 6)}, /* Olivetti Olicard 200 */ + {QMI_FIXED_INTF(0x0b3c, 0xc00b, 4)}, /* Olivetti Olicard 500 */ {QMI_FIXED_INTF(0x1e2d, 0x0060, 4)}, /* Cinterion PLxx */ {QMI_FIXED_INTF(0x1e2d, 0x0053, 4)}, /* Cinterion PHxx,PXxx */ -- cgit v1.2.1 From 75573660c47a0db7cc931dcf154945610e02130a Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Bj=C3=B8rn=20Mork?= Date: Fri, 25 Apr 2014 19:00:32 +0200 Subject: net: qmi_wwan: add Alcatel L800MA MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Device interface layout: 0: ff/ff/ff - serial 1: ff/00/00 - serial AT+PPP 2: ff/ff/ff - QMI/wwan 3: 08/06/50 - storage Signed-off-by: Bjørn Mork Signed-off-by: David S. Miller --- drivers/net/usb/qmi_wwan.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/net/usb/qmi_wwan.c b/drivers/net/usb/qmi_wwan.c index 127b745d2e15..46937c1b8181 100644 --- a/drivers/net/usb/qmi_wwan.c +++ b/drivers/net/usb/qmi_wwan.c @@ -738,6 +738,7 @@ static const struct usb_device_id products[] = { {QMI_FIXED_INTF(0x1199, 0x9041, 8)}, /* Sierra Wireless MC7305/MC7355 */ {QMI_FIXED_INTF(0x1199, 0x9051, 8)}, /* Netgear AirCard 340U */ {QMI_FIXED_INTF(0x1bbb, 0x011e, 4)}, /* Telekom Speedstick LTE II (Alcatel One Touch L100V LTE) */ + {QMI_FIXED_INTF(0x1bbb, 0x0203, 2)}, /* Alcatel L800MA */ {QMI_FIXED_INTF(0x2357, 0x0201, 4)}, /* TP-LINK HSUPA Modem MA180 */ {QMI_FIXED_INTF(0x2357, 0x9000, 4)}, /* TP-LINK MA260 */ {QMI_FIXED_INTF(0x1bc7, 0x1200, 5)}, /* Telit LE920 */ -- cgit v1.2.1 From 41be7d90993b1502d445bfc59e58348c258ce66a Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Bj=C3=B8rn=20Mork?= Date: Fri, 25 Apr 2014 19:00:33 +0200 Subject: net: qmi_wwan: add a number of CMOTech devices MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit A number of older CMOTech modems are based on Qualcomm chips and exporting a QMI/wwan function. Reported-by: Lars Melin Signed-off-by: Bjørn Mork Signed-off-by: David S. Miller --- drivers/net/usb/qmi_wwan.c | 16 ++++++++++++++++ 1 file changed, 16 insertions(+) (limited to 'drivers') diff --git a/drivers/net/usb/qmi_wwan.c b/drivers/net/usb/qmi_wwan.c index 46937c1b8181..ac1ad189f0c1 100644 --- a/drivers/net/usb/qmi_wwan.c +++ b/drivers/net/usb/qmi_wwan.c @@ -669,6 +669,22 @@ static const struct usb_device_id products[] = { {QMI_FIXED_INTF(0x05c6, 0x920d, 5)}, {QMI_FIXED_INTF(0x12d1, 0x140c, 1)}, /* Huawei E173 */ {QMI_FIXED_INTF(0x12d1, 0x14ac, 1)}, /* Huawei E1820 */ + {QMI_FIXED_INTF(0x16d8, 0x6003, 0)}, /* CMOTech 6003 */ + {QMI_FIXED_INTF(0x16d8, 0x6007, 0)}, /* CMOTech CHE-628S */ + {QMI_FIXED_INTF(0x16d8, 0x6008, 0)}, /* CMOTech CMU-301 */ + {QMI_FIXED_INTF(0x16d8, 0x6280, 0)}, /* CMOTech CHU-628 */ + {QMI_FIXED_INTF(0x16d8, 0x7001, 0)}, /* CMOTech CHU-720S */ + {QMI_FIXED_INTF(0x16d8, 0x7002, 0)}, /* CMOTech 7002 */ + {QMI_FIXED_INTF(0x16d8, 0x7003, 4)}, /* CMOTech CHU-629K */ + {QMI_FIXED_INTF(0x16d8, 0x7004, 3)}, /* CMOTech 7004 */ + {QMI_FIXED_INTF(0x16d8, 0x7006, 5)}, /* CMOTech CGU-629 */ + {QMI_FIXED_INTF(0x16d8, 0x700a, 4)}, /* CMOTech CHU-629S */ + {QMI_FIXED_INTF(0x16d8, 0x7211, 0)}, /* CMOTech CHU-720I */ + {QMI_FIXED_INTF(0x16d8, 0x7212, 0)}, /* CMOTech 7212 */ + {QMI_FIXED_INTF(0x16d8, 0x7213, 0)}, /* CMOTech 7213 */ + {QMI_FIXED_INTF(0x16d8, 0x7251, 1)}, /* CMOTech 7251 */ + {QMI_FIXED_INTF(0x16d8, 0x7252, 1)}, /* CMOTech 7252 */ + {QMI_FIXED_INTF(0x16d8, 0x7253, 1)}, /* CMOTech 7253 */ {QMI_FIXED_INTF(0x19d2, 0x0002, 1)}, {QMI_FIXED_INTF(0x19d2, 0x0012, 1)}, {QMI_FIXED_INTF(0x19d2, 0x0017, 3)}, -- cgit v1.2.1 From 6f10c5d1b1aeddb63d33070abb8bc5a177beeb1f Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Bj=C3=B8rn=20Mork?= Date: Fri, 25 Apr 2014 19:00:34 +0200 Subject: net: qmi_wwan: add a number of Dell devices MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Dan writes: "The Dell drivers use the same configuration for PIDs: 81A2: Dell Wireless 5806 Gobi(TM) 4G LTE Mobile Broadband Card 81A3: Dell Wireless 5570 HSPA+ (42Mbps) Mobile Broadband Card 81A4: Dell Wireless 5570e HSPA+ (42Mbps) Mobile Broadband Card 81A8: Dell Wireless 5808 Gobi(TM) 4G LTE Mobile Broadband Card 81A9: Dell Wireless 5808e Gobi(TM) 4G LTE Mobile Broadband Card These devices are all clearly Sierra devices, but are also definitely Gobi-based. The A8 might be the MC7700/7710 and A9 is likely a MC7750. >From DellGobi5kSetup.exe from the Dell drivers: usbif0: serial/firmware loader? usbif2: nmea usbif3: modem/ppp usbif8: net/QMI" Reported-by: AceLan Kao Reported-by: Dan Williams Signed-off-by: Bjørn Mork Signed-off-by: David S. Miller --- drivers/net/usb/qmi_wwan.c | 5 +++++ 1 file changed, 5 insertions(+) (limited to 'drivers') diff --git a/drivers/net/usb/qmi_wwan.c b/drivers/net/usb/qmi_wwan.c index ac1ad189f0c1..83208d4fdc59 100644 --- a/drivers/net/usb/qmi_wwan.c +++ b/drivers/net/usb/qmi_wwan.c @@ -763,6 +763,11 @@ static const struct usb_device_id products[] = { {QMI_FIXED_INTF(0x0b3c, 0xc00b, 4)}, /* Olivetti Olicard 500 */ {QMI_FIXED_INTF(0x1e2d, 0x0060, 4)}, /* Cinterion PLxx */ {QMI_FIXED_INTF(0x1e2d, 0x0053, 4)}, /* Cinterion PHxx,PXxx */ + {QMI_FIXED_INTF(0x413c, 0x81a2, 8)}, /* Dell Wireless 5806 Gobi(TM) 4G LTE Mobile Broadband Card */ + {QMI_FIXED_INTF(0x413c, 0x81a3, 8)}, /* Dell Wireless 5570 HSPA+ (42Mbps) Mobile Broadband Card */ + {QMI_FIXED_INTF(0x413c, 0x81a4, 8)}, /* Dell Wireless 5570e HSPA+ (42Mbps) Mobile Broadband Card */ + {QMI_FIXED_INTF(0x413c, 0x81a8, 8)}, /* Dell Wireless 5808 Gobi(TM) 4G LTE Mobile Broadband Card */ + {QMI_FIXED_INTF(0x413c, 0x81a9, 8)}, /* Dell Wireless 5808e Gobi(TM) 4G LTE Mobile Broadband Card */ /* 4. Gobi 1000 devices */ {QMI_GOBI1K_DEVICE(0x05c6, 0x9212)}, /* Acer Gobi Modem Device */ -- cgit v1.2.1 From ddcde142bed44490e338ed1124cb149976d355bb Mon Sep 17 00:00:00 2001 From: Oliver Hartkopp Date: Sat, 26 Apr 2014 21:18:32 +0200 Subject: slip: fix spinlock variant With commit cc9fa74e2a ("slip/slcan: added locking in wakeup function") a formerly missing locking was added to slip.c and slcan.c by Andre Naujoks. Alexander Stein contributed the fix 367525c8c2 ("can: slcan: Fix spinlock variant") as the kernel lock debugging advised to use spin_lock_bh() instead of just using spin_lock(). This fix has to be applied to the same code section in slip.c for the same reason too. Signed-off-by: Oliver Hartkopp Signed-off-by: David S. Miller --- drivers/net/slip/slip.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/net/slip/slip.c b/drivers/net/slip/slip.c index cc70ecfc7062..ad4a94e9ff57 100644 --- a/drivers/net/slip/slip.c +++ b/drivers/net/slip/slip.c @@ -429,13 +429,13 @@ static void slip_write_wakeup(struct tty_struct *tty) if (!sl || sl->magic != SLIP_MAGIC || !netif_running(sl->dev)) return; - spin_lock(&sl->lock); + spin_lock_bh(&sl->lock); if (sl->xleft <= 0) { /* Now serial buffer is almost free & we can start * transmission of another packet */ sl->dev->stats.tx_packets++; clear_bit(TTY_DO_WRITE_WAKEUP, &tty->flags); - spin_unlock(&sl->lock); + spin_unlock_bh(&sl->lock); sl_unlock(sl); return; } @@ -443,7 +443,7 @@ static void slip_write_wakeup(struct tty_struct *tty) actual = tty->ops->write(tty, sl->xhead, sl->xleft); sl->xleft -= actual; sl->xhead += actual; - spin_unlock(&sl->lock); + spin_unlock_bh(&sl->lock); } static void sl_tx_timeout(struct net_device *dev) -- cgit v1.2.1 From 05a812ac474d0d6aef6d54b66bb08b81abde79c6 Mon Sep 17 00:00:00 2001 From: Vladimir Murzin Date: Sun, 27 Apr 2014 10:09:12 +0100 Subject: xen/events/fifo: correctly align bitops FIFO event channels require bitops on 32-bit aligned values (the event words). Linux's bitops require unsigned long alignment which may be 64-bits. On arm64 an incorrectly unaligned access will fault. Fix this by aligning the bitops along with an adjustment for bit position and using an unsigned long for the local copy of the ready word. Cc: stable@vger.kernel.org Signed-off-by: Vladimir Murzin Tested-by: Pranavkumar Sawargaonkar Reviewed-by: Ian Campbell Signed-off-by: David Vrabel --- drivers/xen/events/events_fifo.c | 41 +++++++++++++++++++++++++++++----------- 1 file changed, 30 insertions(+), 11 deletions(-) (limited to 'drivers') diff --git a/drivers/xen/events/events_fifo.c b/drivers/xen/events/events_fifo.c index 96109a9972b6..84b4bfb84344 100644 --- a/drivers/xen/events/events_fifo.c +++ b/drivers/xen/events/events_fifo.c @@ -66,7 +66,22 @@ static DEFINE_PER_CPU(struct evtchn_fifo_queue, cpu_queue); static event_word_t *event_array[MAX_EVENT_ARRAY_PAGES] __read_mostly; static unsigned event_array_pages __read_mostly; +/* + * sync_set_bit() and friends must be unsigned long aligned on non-x86 + * platforms. + */ +#if !defined(CONFIG_X86) && BITS_PER_LONG > 32 + +#define BM(w) (unsigned long *)((unsigned long)w & ~0x7UL) +#define EVTCHN_FIFO_BIT(b, w) \ + (((unsigned long)w & 0x4UL) ? (EVTCHN_FIFO_ ##b + 32) : EVTCHN_FIFO_ ##b) + +#else + #define BM(w) ((unsigned long *)(w)) +#define EVTCHN_FIFO_BIT(b, w) EVTCHN_FIFO_ ##b + +#endif static inline event_word_t *event_word_from_port(unsigned port) { @@ -161,33 +176,38 @@ static void evtchn_fifo_bind_to_cpu(struct irq_info *info, unsigned cpu) static void evtchn_fifo_clear_pending(unsigned port) { event_word_t *word = event_word_from_port(port); - sync_clear_bit(EVTCHN_FIFO_PENDING, BM(word)); + sync_clear_bit(EVTCHN_FIFO_BIT(PENDING, word), BM(word)); } static void evtchn_fifo_set_pending(unsigned port) { event_word_t *word = event_word_from_port(port); - sync_set_bit(EVTCHN_FIFO_PENDING, BM(word)); + sync_set_bit(EVTCHN_FIFO_BIT(PENDING, word), BM(word)); } static bool evtchn_fifo_is_pending(unsigned port) { event_word_t *word = event_word_from_port(port); - return sync_test_bit(EVTCHN_FIFO_PENDING, BM(word)); + return sync_test_bit(EVTCHN_FIFO_BIT(PENDING, word), BM(word)); } static bool evtchn_fifo_test_and_set_mask(unsigned port) { event_word_t *word = event_word_from_port(port); - return sync_test_and_set_bit(EVTCHN_FIFO_MASKED, BM(word)); + return sync_test_and_set_bit(EVTCHN_FIFO_BIT(MASKED, word), BM(word)); } static void evtchn_fifo_mask(unsigned port) { event_word_t *word = event_word_from_port(port); - sync_set_bit(EVTCHN_FIFO_MASKED, BM(word)); + sync_set_bit(EVTCHN_FIFO_BIT(MASKED, word), BM(word)); } +static bool evtchn_fifo_is_masked(unsigned port) +{ + event_word_t *word = event_word_from_port(port); + return sync_test_bit(EVTCHN_FIFO_BIT(MASKED, word), BM(word)); +} /* * Clear MASKED, spinning if BUSY is set. */ @@ -211,7 +231,7 @@ static void evtchn_fifo_unmask(unsigned port) BUG_ON(!irqs_disabled()); clear_masked(word); - if (sync_test_bit(EVTCHN_FIFO_PENDING, BM(word))) { + if (evtchn_fifo_is_pending(port)) { struct evtchn_unmask unmask = { .port = port }; (void)HYPERVISOR_event_channel_op(EVTCHNOP_unmask, &unmask); } @@ -243,7 +263,7 @@ static void handle_irq_for_port(unsigned port) static void consume_one_event(unsigned cpu, struct evtchn_fifo_control_block *control_block, - unsigned priority, uint32_t *ready) + unsigned priority, unsigned long *ready) { struct evtchn_fifo_queue *q = &per_cpu(cpu_queue, cpu); uint32_t head; @@ -273,10 +293,9 @@ static void consume_one_event(unsigned cpu, * copy of the ready word. */ if (head == 0) - clear_bit(priority, BM(ready)); + clear_bit(priority, ready); - if (sync_test_bit(EVTCHN_FIFO_PENDING, BM(word)) - && !sync_test_bit(EVTCHN_FIFO_MASKED, BM(word))) + if (evtchn_fifo_is_pending(port) && !evtchn_fifo_is_masked(port)) handle_irq_for_port(port); q->head[priority] = head; @@ -285,7 +304,7 @@ static void consume_one_event(unsigned cpu, static void evtchn_fifo_handle_events(unsigned cpu) { struct evtchn_fifo_control_block *control_block; - uint32_t ready; + unsigned long ready; unsigned q; control_block = per_cpu(cpu_control_block, cpu); -- cgit v1.2.1 From 27c5fb7a84242b66bf1e0b2fe6bf40d19bcc5c04 Mon Sep 17 00:00:00 2001 From: Horia Geanta Date: Fri, 18 Apr 2014 13:01:42 +0300 Subject: crypto: caam - add allocation failure handling in SPRINTFCAT macro GFP_ATOMIC memory allocation could fail. In this case, avoid NULL pointer dereference and notify user. Cc: # 3.2+ Cc: Kim Phillips Signed-off-by: Horia Geanta Signed-off-by: Herbert Xu --- drivers/crypto/caam/error.c | 10 +++++++--- 1 file changed, 7 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/crypto/caam/error.c b/drivers/crypto/caam/error.c index 9f25f5296029..0eabd81e1a90 100644 --- a/drivers/crypto/caam/error.c +++ b/drivers/crypto/caam/error.c @@ -16,9 +16,13 @@ char *tmp; \ \ tmp = kmalloc(sizeof(format) + max_alloc, GFP_ATOMIC); \ - sprintf(tmp, format, param); \ - strcat(str, tmp); \ - kfree(tmp); \ + if (likely(tmp)) { \ + sprintf(tmp, format, param); \ + strcat(str, tmp); \ + kfree(tmp); \ + } else { \ + strcat(str, "kmalloc failure in SPRINTFCAT"); \ + } \ } static void report_jump_idx(u32 status, char *outstr) -- cgit v1.2.1 From af61e27c3f77c7623b5335590ae24b6a5c323e22 Mon Sep 17 00:00:00 2001 From: Tyler Stachecki Date: Fri, 25 Apr 2014 16:41:04 -0400 Subject: [SCSI] mpt2sas: Don't disable device twice at suspend. On suspend, _scsih_suspend calls mpt2sas_base_free_resources, which in turn calls pci_disable_device if the device is enabled prior to suspending. However, _scsih_suspend also calls pci_disable_device itself. Thus, in the event that the device is enabled prior to suspending, pci_disable_device will be called twice. This patch removes the duplicate call to pci_disable_device in _scsi_suspend as it is both unnecessary and results in a kernel oops. Signed-off-by: Tyler Stachecki Cc: stable@vger.kernel.org Signed-off-by: James Bottomley --- drivers/scsi/mpt2sas/mpt2sas_scsih.c | 1 - 1 file changed, 1 deletion(-) (limited to 'drivers') diff --git a/drivers/scsi/mpt2sas/mpt2sas_scsih.c b/drivers/scsi/mpt2sas/mpt2sas_scsih.c index 7f0af4fcc001..6fd7d40b2c4d 100644 --- a/drivers/scsi/mpt2sas/mpt2sas_scsih.c +++ b/drivers/scsi/mpt2sas/mpt2sas_scsih.c @@ -8293,7 +8293,6 @@ _scsih_suspend(struct pci_dev *pdev, pm_message_t state) mpt2sas_base_free_resources(ioc); pci_save_state(pdev); - pci_disable_device(pdev); pci_set_power_state(pdev, device_state); return 0; } -- cgit v1.2.1 From 014f1b20108dc2c0bb0777d8383654a089c790f8 Mon Sep 17 00:00:00 2001 From: Masanari Iida Date: Tue, 29 Apr 2014 00:41:21 +0900 Subject: net: bonding: Fix format string mismatch in bond_sysfs.c Fix format string mismatch in bonding_show_min_links(). Signed-off-by: Masanari Iida Signed-off-by: David S. Miller --- drivers/net/bonding/bond_sysfs.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/bonding/bond_sysfs.c b/drivers/net/bonding/bond_sysfs.c index 0e8b268da0a0..5f6babcfc26e 100644 --- a/drivers/net/bonding/bond_sysfs.c +++ b/drivers/net/bonding/bond_sysfs.c @@ -534,7 +534,7 @@ static ssize_t bonding_show_min_links(struct device *d, { struct bonding *bond = to_bond(d); - return sprintf(buf, "%d\n", bond->params.min_links); + return sprintf(buf, "%u\n", bond->params.min_links); } static ssize_t bonding_store_min_links(struct device *d, -- cgit v1.2.1 From 8cc3cfc5ccf1680b7c88f874912b6bec2797b76b Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Tue, 4 Mar 2014 20:43:41 +0000 Subject: irqchip: armanda: Sanitize set_irq_affinity() The set_irq_affinity() function has two issues: 1) It has no protection against selecting an offline cpu from the given mask. 2) It pointlessly restricts the affinity masks to have a single cpu set. This collides with the irq migration code of arm. irq affinity is set to core 3 core 3 goes offline migration code sets mask to cpu_online_mask and calls the irq_set_affinity() callback of the irq_chip which fails due to bit 0,1,2 set. So instead of doing silly for_each_cpu() loops just pick any bit of the mask which intersects with the online mask. Get rid of fiddling with the default_irq_affinity as well. [ Gregory: Fixed the access to the routing register ] Signed-off-by: Thomas Gleixner Acked-by: Gregory CLEMENT Tested-by: Gregory CLEMENT Cc: Jason Cooper Cc: Peter Zijlstra Cc: Ingo Molnar Link: http://lkml.kernel.org/r/20140304203101.088889302@linutronix.de Signed-off-by: Thomas Gleixner --- drivers/irqchip/irq-armada-370-xp.c | 37 ++++++------------------------------- 1 file changed, 6 insertions(+), 31 deletions(-) (limited to 'drivers') diff --git a/drivers/irqchip/irq-armada-370-xp.c b/drivers/irqchip/irq-armada-370-xp.c index 41be897df8d5..304a20d0ad15 100644 --- a/drivers/irqchip/irq-armada-370-xp.c +++ b/drivers/irqchip/irq-armada-370-xp.c @@ -41,6 +41,7 @@ #define ARMADA_370_XP_INT_SET_ENABLE_OFFS (0x30) #define ARMADA_370_XP_INT_CLEAR_ENABLE_OFFS (0x34) #define ARMADA_370_XP_INT_SOURCE_CTL(irq) (0x100 + irq*4) +#define ARMADA_370_XP_INT_SOURCE_CPU_MASK 0xF #define ARMADA_370_XP_CPU_INTACK_OFFS (0x44) #define ARMADA_375_PPI_CAUSE (0x10) @@ -244,35 +245,18 @@ static DEFINE_RAW_SPINLOCK(irq_controller_lock); static int armada_xp_set_affinity(struct irq_data *d, const struct cpumask *mask_val, bool force) { - unsigned long reg; - unsigned long new_mask = 0; - unsigned long online_mask = 0; - unsigned long count = 0; irq_hw_number_t hwirq = irqd_to_hwirq(d); + unsigned long reg, mask; int cpu; - for_each_cpu(cpu, mask_val) { - new_mask |= 1 << cpu_logical_map(cpu); - count++; - } - - /* - * Forbid mutlicore interrupt affinity - * This is required since the MPIC HW doesn't limit - * several CPUs from acknowledging the same interrupt. - */ - if (count > 1) - return -EINVAL; - - for_each_cpu(cpu, cpu_online_mask) - online_mask |= 1 << cpu_logical_map(cpu); + /* Select a single core from the affinity mask which is online */ + cpu = cpumask_any_and(mask_val, cpu_online_mask); + mask = 1UL << cpu_logical_map(cpu); raw_spin_lock(&irq_controller_lock); - reg = readl(main_int_base + ARMADA_370_XP_INT_SOURCE_CTL(hwirq)); - reg = (reg & (~online_mask)) | new_mask; + reg = (reg & (~ARMADA_370_XP_INT_SOURCE_CPU_MASK)) | mask; writel(reg, main_int_base + ARMADA_370_XP_INT_SOURCE_CTL(hwirq)); - raw_spin_unlock(&irq_controller_lock); return 0; @@ -494,15 +478,6 @@ static int __init armada_370_xp_mpic_of_init(struct device_node *node, #ifdef CONFIG_SMP armada_xp_mpic_smp_cpu_init(); - - /* - * Set the default affinity from all CPUs to the boot cpu. - * This is required since the MPIC doesn't limit several CPUs - * from acknowledging the same interrupt. - */ - cpumask_clear(irq_default_affinity); - cpumask_set_cpu(smp_processor_id(), irq_default_affinity); - #endif armada_370_xp_msi_init(node, main_int_res.start); -- cgit v1.2.1 From 3894e9e82dfdc87fa35dc7976e0472d220228826 Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Thu, 3 Apr 2014 10:21:34 +0300 Subject: irqchip: irq-crossbar: Not allocating enough memory We are allocating the size of a pointer and not the size of the data. This will lead to memory corruption. There isn't actually a "cb_device" struct, btw. The code is only able to compile because GCC knows that all pointers are the same size. Fixes: 96ca848ef7ea ('DRIVERS: IRQCHIP: CROSSBAR: Add support for Crossbar IP') Signed-off-by: Dan Carpenter Acked-by: Sricharan R Cc: Grant Likely Cc: Rob Herring Link: http://lkml.kernel.org/r/20140403072134.GA14286@mwanda Signed-off-by: Thomas Gleixner --- drivers/irqchip/irq-crossbar.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/irqchip/irq-crossbar.c b/drivers/irqchip/irq-crossbar.c index fc817d28d1fe..3d15d16a7088 100644 --- a/drivers/irqchip/irq-crossbar.c +++ b/drivers/irqchip/irq-crossbar.c @@ -107,7 +107,7 @@ static int __init crossbar_of_init(struct device_node *node) int i, size, max, reserved = 0, entry; const __be32 *irqsr; - cb = kzalloc(sizeof(struct cb_device *), GFP_KERNEL); + cb = kzalloc(sizeof(*cb), GFP_KERNEL); if (!cb) return -ENOMEM; -- cgit v1.2.1 From 0c8482ac92db5ac15792caf23b7f7df9e4f48ae1 Mon Sep 17 00:00:00 2001 From: Fam Zheng Date: Mon, 14 Apr 2014 10:16:09 +0800 Subject: [SCSI] virtio-scsi: Skip setting affinity on uninitialized vq virtscsi_init calls virtscsi_remove_vqs on err, even before initializing the vqs. The latter calls virtscsi_set_affinity, so let's check the pointer there before setting affinity on it. This fixes a panic when setting device's num_queues=2 on RHEL 6.5: qemu-system-x86_64 ... \ -device virtio-scsi-pci,id=scsi0,addr=0x13,...,num_queues=2 \ -drive file=/stor/vm/dummy.raw,id=drive-scsi-disk,... \ -device scsi-hd,drive=drive-scsi-disk,... [ 0.354734] scsi0 : Virtio SCSI HBA [ 0.379504] BUG: unable to handle kernel NULL pointer dereference at 0000000000000020 [ 0.380141] IP: [] __virtscsi_set_affinity+0x4f/0x120 [ 0.380141] PGD 0 [ 0.380141] Oops: 0000 [#1] SMP [ 0.380141] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 3.14.0+ #5 [ 0.380141] Hardware name: Red Hat KVM, BIOS 0.5.1 01/01/2007 [ 0.380141] task: ffff88003c9f0000 ti: ffff88003c9f8000 task.ti: ffff88003c9f8000 [ 0.380141] RIP: 0010:[] [] __virtscsi_set_affinity+0x4f/0x120 [ 0.380141] RSP: 0000:ffff88003c9f9c08 EFLAGS: 00010256 [ 0.380141] RAX: 0000000000000000 RBX: ffff88003c3a9d40 RCX: 0000000000001070 [ 0.380141] RDX: 0000000000000002 RSI: 0000000000000000 RDI: 0000000000000000 [ 0.380141] RBP: ffff88003c9f9c28 R08: 00000000000136c0 R09: ffff88003c801c00 [ 0.380141] R10: ffffffff81475229 R11: 0000000000000008 R12: 0000000000000000 [ 0.380141] R13: ffffffff81cc7ca8 R14: ffff88003cac3d40 R15: ffff88003cac37a0 [ 0.380141] FS: 0000000000000000(0000) GS:ffff88003e400000(0000) knlGS:0000000000000000 [ 0.380141] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b [ 0.380141] CR2: 0000000000000020 CR3: 0000000001c0e000 CR4: 00000000000006f0 [ 0.380141] Stack: [ 0.380141] ffff88003c3a9d40 0000000000000000 ffff88003cac3d80 ffff88003cac3d40 [ 0.380141] ffff88003c9f9c48 ffffffff814742e8 ffff88003c26d000 ffff88003c26d000 [ 0.380141] ffff88003c9f9c68 ffffffff81474321 ffff88003c26d000 ffff88003c3a9d40 [ 0.380141] Call Trace: [ 0.380141] [] virtscsi_set_affinity+0x28/0x40 [ 0.380141] [] virtscsi_remove_vqs+0x21/0x50 [ 0.380141] [] virtscsi_init+0x91/0x240 [ 0.380141] [] ? vp_get+0x50/0x70 [ 0.380141] [] virtscsi_probe+0xf4/0x280 [ 0.380141] [] virtio_dev_probe+0xe5/0x140 [ 0.380141] [] driver_probe_device+0x89/0x230 [ 0.380141] [] __driver_attach+0x9b/0xa0 [ 0.380141] [] ? driver_probe_device+0x230/0x230 [ 0.380141] [] ? driver_probe_device+0x230/0x230 [ 0.380141] [] bus_for_each_dev+0x8c/0xb0 [ 0.380141] [] driver_attach+0x19/0x20 [ 0.380141] [] bus_add_driver+0x198/0x220 [ 0.380141] [] driver_register+0x5f/0xf0 [ 0.380141] [] ? spi_transport_init+0x79/0x79 [ 0.380141] [] register_virtio_driver+0x1b/0x30 [ 0.380141] [] init+0x88/0xd6 [ 0.380141] [] ? scsi_init_procfs+0x5b/0x5b [ 0.380141] [] do_one_initcall+0x7f/0x10a [ 0.380141] [] kernel_init_freeable+0x14a/0x1de [ 0.380141] [] ? kernel_init_freeable+0x1de/0x1de [ 0.380141] [] ? rest_init+0x80/0x80 [ 0.380141] [] kernel_init+0x9/0xf0 [ 0.380141] [] ret_from_fork+0x7c/0xb0 [ 0.380141] [] ? rest_init+0x80/0x80 [ 0.380141] RIP [] __virtscsi_set_affinity+0x4f/0x120 [ 0.380141] RSP [ 0.380141] CR2: 0000000000000020 [ 0.380141] ---[ end trace 8074b70c3d5e1d73 ]--- [ 0.475018] Kernel panic - not syncing: Attempted to kill init! exitcode=0x00000009 [ 0.475018] [ 0.475068] Kernel Offset: 0x0 from 0xffffffff81000000 (relocation range: 0xffffffff80000000-0xffffffff9fffffff) [ 0.475068] ---[ end Kernel panic - not syncing: Attempted to kill init! exitcode=0x00000009 [jejb: checkpatch fixes] Signed-off-by: Fam Zheng Acked-by: Paolo Bonzini Cc: stable@vger.kernel.org Signed-off-by: James Bottomley --- drivers/scsi/virtio_scsi.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/scsi/virtio_scsi.c b/drivers/scsi/virtio_scsi.c index 16bfd50cd3fe..db3b494e5926 100644 --- a/drivers/scsi/virtio_scsi.c +++ b/drivers/scsi/virtio_scsi.c @@ -750,8 +750,12 @@ static void __virtscsi_set_affinity(struct virtio_scsi *vscsi, bool affinity) vscsi->affinity_hint_set = true; } else { - for (i = 0; i < vscsi->num_queues; i++) + for (i = 0; i < vscsi->num_queues; i++) { + if (!vscsi->req_vqs[i].vq) + continue; + virtqueue_set_affinity(vscsi->req_vqs[i].vq, -1); + } vscsi->affinity_hint_set = false; } -- cgit v1.2.1 From 7aa0557fae5ce26dddc877869c7ad934e71f30db Mon Sep 17 00:00:00 2001 From: "Srivatsa S. Bhat" Date: Tue, 29 Apr 2014 00:24:09 +0530 Subject: cpufreq: longhaul: Fix double invocation of cpufreq_freq_transition_begin/end During frequency transitions, the cpufreq core takes the responsibility of invoking cpufreq_freq_transition_begin() and cpufreq_freq_transition_end() for those cpufreq drivers that define the ->target_index callback but don't set the ASYNC_NOTIFICATION flag. The longhaul cpufreq driver falls under this category, but this driver was invoking the _begin() and _end() APIs itself around frequency transitions, which led to double invocation of the _begin() API. The _begin API makes contending callers wait until the previous invocation is complete. Hence, the longhaul driver ended up waiting on itself, leading to system hangs during boot. Fix this by removing the calls to the _begin() and _end() APIs from the longhaul driver, since they rightly belong to the cpufreq core. (Note that during module_exit(), the longhaul driver sets the frequency without any help from the cpufreq core. So add explicit calls to the _begin() and _end() APIs around that frequency transition alone, to take care of that special case.) Fixes: 12478cf0c55e (cpufreq: Make sure frequency transitions are serialized) Reported-and-tested-by: Meelis Roos Signed-off-by: Srivatsa S. Bhat Signed-off-by: Rafael J. Wysocki --- drivers/cpufreq/longhaul.c | 36 ++++++++++++++++++++++++------------ 1 file changed, 24 insertions(+), 12 deletions(-) (limited to 'drivers') diff --git a/drivers/cpufreq/longhaul.c b/drivers/cpufreq/longhaul.c index d00e5d1abd25..5c4369b5d834 100644 --- a/drivers/cpufreq/longhaul.c +++ b/drivers/cpufreq/longhaul.c @@ -242,7 +242,7 @@ static void do_powersaver(int cx_address, unsigned int mults_index, * Sets a new clock ratio. */ -static void longhaul_setstate(struct cpufreq_policy *policy, +static int longhaul_setstate(struct cpufreq_policy *policy, unsigned int table_index) { unsigned int mults_index; @@ -258,10 +258,12 @@ static void longhaul_setstate(struct cpufreq_policy *policy, /* Safety precautions */ mult = mults[mults_index & 0x1f]; if (mult == -1) - return; + return -EINVAL; + speed = calc_speed(mult); if ((speed > highest_speed) || (speed < lowest_speed)) - return; + return -EINVAL; + /* Voltage transition before frequency transition? */ if (can_scale_voltage && longhaul_index < table_index) dir = 1; @@ -269,8 +271,6 @@ static void longhaul_setstate(struct cpufreq_policy *policy, freqs.old = calc_speed(longhaul_get_cpu_mult()); freqs.new = speed; - cpufreq_freq_transition_begin(policy, &freqs); - pr_debug("Setting to FSB:%dMHz Mult:%d.%dx (%s)\n", fsb, mult/10, mult%10, print_speed(speed/1000)); retry_loop: @@ -385,12 +385,14 @@ retry_loop: goto retry_loop; } } - /* Report true CPU frequency */ - cpufreq_freq_transition_end(policy, &freqs, 0); - if (!bm_timeout) + if (!bm_timeout) { printk(KERN_INFO PFX "Warning: Timeout while waiting for " "idle PCI bus.\n"); + return -EBUSY; + } + + return 0; } /* @@ -631,9 +633,10 @@ static int longhaul_target(struct cpufreq_policy *policy, unsigned int i; unsigned int dir = 0; u8 vid, current_vid; + int retval = 0; if (!can_scale_voltage) - longhaul_setstate(policy, table_index); + retval = longhaul_setstate(policy, table_index); else { /* On test system voltage transitions exceeding single * step up or down were turning motherboard off. Both @@ -648,7 +651,7 @@ static int longhaul_target(struct cpufreq_policy *policy, while (i != table_index) { vid = (longhaul_table[i].driver_data >> 8) & 0x1f; if (vid != current_vid) { - longhaul_setstate(policy, i); + retval = longhaul_setstate(policy, i); current_vid = vid; msleep(200); } @@ -657,10 +660,11 @@ static int longhaul_target(struct cpufreq_policy *policy, else i--; } - longhaul_setstate(policy, table_index); + retval = longhaul_setstate(policy, table_index); } + longhaul_index = table_index; - return 0; + return retval; } @@ -968,7 +972,15 @@ static void __exit longhaul_exit(void) for (i = 0; i < numscales; i++) { if (mults[i] == maxmult) { + struct cpufreq_freqs freqs; + + freqs.old = policy->cur; + freqs.new = longhaul_table[i].frequency; + freqs.flags = 0; + + cpufreq_freq_transition_begin(policy, &freqs); longhaul_setstate(policy, i); + cpufreq_freq_transition_end(policy, &freqs, 0); break; } } -- cgit v1.2.1 From 237ede16ba5bcd4d6c612ea280518c48ca31986c Mon Sep 17 00:00:00 2001 From: "Srivatsa S. Bhat" Date: Tue, 29 Apr 2014 00:24:27 +0530 Subject: cpufreq: powernow-k6: Fix incorrect comparison with max_multipler The value of 'max_multiplier' is meant to be used for comparison with clock_ratio[index].driver_data, not the index itself! Fix the code in powernow_k6_cpu_exit() that has this bug. Also, while at it, make the for-loop condition look for CPUFREQ_TABLE_END, instead of hard-coding the loop count to 8. Reported-by: Viresh Kumar Signed-off-by: Srivatsa S. Bhat Acked-by: Viresh Kumar Signed-off-by: Rafael J. Wysocki --- drivers/cpufreq/powernow-k6.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/cpufreq/powernow-k6.c b/drivers/cpufreq/powernow-k6.c index 49f120e1bc7b..695a68cfdcd4 100644 --- a/drivers/cpufreq/powernow-k6.c +++ b/drivers/cpufreq/powernow-k6.c @@ -227,8 +227,9 @@ have_busfreq: static int powernow_k6_cpu_exit(struct cpufreq_policy *policy) { unsigned int i; - for (i = 0; i < 8; i++) { - if (i == max_multiplier) + + for (i = 0; (clock_ratio[i].frequency != CPUFREQ_TABLE_END); i++) { + if (clock_ratio[i].driver_data == max_multiplier) powernow_k6_target(policy, i); } return 0; -- cgit v1.2.1 From 3221e55b72359c44ed75afbcf707710af5bc2d59 Mon Sep 17 00:00:00 2001 From: "Srivatsa S. Bhat" Date: Tue, 29 Apr 2014 00:24:42 +0530 Subject: cpufreq: powernow-k6: Fix double invocation of cpufreq_freq_transition_begin/end During frequency transitions, the cpufreq core takes the responsibility of invoking cpufreq_freq_transition_begin() and cpufreq_freq_transition_end() for those cpufreq drivers that define the ->target_index callback but don't set the ASYNC_NOTIFICATION flag. The powernow-k6 cpufreq driver falls under this category, but this driver was invoking the _begin() and _end() APIs itself around frequency transitions, which led to double invocation of the _begin() API. The _begin API makes contending callers wait until the previous invocation is complete. Hence, the powernow-k6 driver ended up waiting on itself, leading to system hangs during boot. Fix this by removing the calls to the _begin() and _end() APIs from the powernow-k6 driver, since they rightly belong to the cpufreq core. (Note that during ->exit(), the powernow-k6 driver sets the frequency without any help from the cpufreq core. So add explicit calls to the _begin() and _end() APIs around that frequency transition alone, to take care of that special case. Also, add a missing 'break' statement there.) Fixes: 12478cf0c55e (cpufreq: Make sure frequency transitions are serialized) Signed-off-by: Srivatsa S. Bhat Acked-by: Viresh Kumar Signed-off-by: Rafael J. Wysocki --- drivers/cpufreq/powernow-k6.c | 20 +++++++++++--------- 1 file changed, 11 insertions(+), 9 deletions(-) (limited to 'drivers') diff --git a/drivers/cpufreq/powernow-k6.c b/drivers/cpufreq/powernow-k6.c index 695a68cfdcd4..78904e6ca4a0 100644 --- a/drivers/cpufreq/powernow-k6.c +++ b/drivers/cpufreq/powernow-k6.c @@ -138,22 +138,14 @@ static void powernow_k6_set_cpu_multiplier(unsigned int best_i) static int powernow_k6_target(struct cpufreq_policy *policy, unsigned int best_i) { - struct cpufreq_freqs freqs; if (clock_ratio[best_i].driver_data > max_multiplier) { printk(KERN_ERR PFX "invalid target frequency\n"); return -EINVAL; } - freqs.old = busfreq * powernow_k6_get_cpu_multiplier(); - freqs.new = busfreq * clock_ratio[best_i].driver_data; - - cpufreq_freq_transition_begin(policy, &freqs); - powernow_k6_set_cpu_multiplier(best_i); - cpufreq_freq_transition_end(policy, &freqs, 0); - return 0; } @@ -229,8 +221,18 @@ static int powernow_k6_cpu_exit(struct cpufreq_policy *policy) unsigned int i; for (i = 0; (clock_ratio[i].frequency != CPUFREQ_TABLE_END); i++) { - if (clock_ratio[i].driver_data == max_multiplier) + if (clock_ratio[i].driver_data == max_multiplier) { + struct cpufreq_freqs freqs; + + freqs.old = policy->cur; + freqs.new = clock_ratio[i].frequency; + freqs.flags = 0; + + cpufreq_freq_transition_begin(policy, &freqs); powernow_k6_target(policy, i); + cpufreq_freq_transition_end(policy, &freqs, 0); + break; + } } return 0; } -- cgit v1.2.1 From 8997b185119966c62c6e95e7b010b4060407e358 Mon Sep 17 00:00:00 2001 From: "Srivatsa S. Bhat" Date: Tue, 29 Apr 2014 00:24:58 +0530 Subject: cpufreq: powernow-k7: Fix double invocation of cpufreq_freq_transition_begin/end During frequency transitions, the cpufreq core takes the responsibility of invoking cpufreq_freq_transition_begin() and cpufreq_freq_transition_end() for those cpufreq drivers that define the ->target_index callback but don't set the ASYNC_NOTIFICATION flag. The powernow-k7 cpufreq driver falls under this category, but this driver was invoking the _begin() and _end() APIs itself around frequency transitions, which led to double invocation of the _begin() API. The _begin API makes contending callers wait until the previous invocation is complete. Hence, the powernow-k7 driver ended up waiting on itself, leading to system hangs during boot. Fix this by removing the calls to the _begin() and _end() APIs from the powernow-k7 driver, since they rightly belong to the cpufreq core. Fixes: 12478cf0c55e (cpufreq: Make sure frequency transitions are serialized) Signed-off-by: Srivatsa S. Bhat Acked-by: Viresh Kumar Signed-off-by: Rafael J. Wysocki --- drivers/cpufreq/powernow-k7.c | 4 ---- 1 file changed, 4 deletions(-) (limited to 'drivers') diff --git a/drivers/cpufreq/powernow-k7.c b/drivers/cpufreq/powernow-k7.c index f911645c3f6d..e61e224475ad 100644 --- a/drivers/cpufreq/powernow-k7.c +++ b/drivers/cpufreq/powernow-k7.c @@ -269,8 +269,6 @@ static int powernow_target(struct cpufreq_policy *policy, unsigned int index) freqs.new = powernow_table[index].frequency; - cpufreq_freq_transition_begin(policy, &freqs); - /* Now do the magic poking into the MSRs. */ if (have_a0 == 1) /* A0 errata 5 */ @@ -290,8 +288,6 @@ static int powernow_target(struct cpufreq_policy *policy, unsigned int index) if (have_a0 == 1) local_irq_enable(); - cpufreq_freq_transition_end(policy, &freqs, 0); - return 0; } -- cgit v1.2.1 From 6712d2931933ada259b82f06c03a855b19937074 Mon Sep 17 00:00:00 2001 From: Tim Gardner Date: Mon, 28 Apr 2014 10:18:18 -0600 Subject: cpufreq: ppc-corenet-cpufreq: Fix __udivdi3 modpost error bfa709bc823fc32ee8dd5220d1711b46078235d8 (cpufreq: powerpc: add cpufreq transition latency for FSL e500mc SoCs) introduced a modpost error: ERROR: "__udivdi3" [drivers/cpufreq/ppc-corenet-cpufreq.ko] undefined! make[1]: *** [__modpost] Error 1 Fix this by avoiding 64 bit integer division. gcc version 4.8.2 Fixes: bfa709bc823f (cpufreq: powerpc: add cpufreq transition latency for FSL e500mc SoCs) Signed-off-by: Tim Gardner Signed-off-by: Rafael J. Wysocki --- drivers/cpufreq/ppc-corenet-cpufreq.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/cpufreq/ppc-corenet-cpufreq.c b/drivers/cpufreq/ppc-corenet-cpufreq.c index a1ca3dd04a8e..0af618abebaf 100644 --- a/drivers/cpufreq/ppc-corenet-cpufreq.c +++ b/drivers/cpufreq/ppc-corenet-cpufreq.c @@ -138,6 +138,7 @@ static int corenet_cpufreq_cpu_init(struct cpufreq_policy *policy) struct cpufreq_frequency_table *table; struct cpu_data *data; unsigned int cpu = policy->cpu; + u64 transition_latency_hz; np = of_get_cpu_node(cpu, NULL); if (!np) @@ -205,8 +206,10 @@ static int corenet_cpufreq_cpu_init(struct cpufreq_policy *policy) for_each_cpu(i, per_cpu(cpu_mask, cpu)) per_cpu(cpu_data, i) = data; + transition_latency_hz = 12ULL * NSEC_PER_SEC; policy->cpuinfo.transition_latency = - (12ULL * NSEC_PER_SEC) / fsl_get_sys_freq(); + do_div(transition_latency_hz, fsl_get_sys_freq()); + of_node_put(np); return 0; -- cgit v1.2.1 From cc18b939e1efbc2a47f62dbd2b1df53d974df6b7 Mon Sep 17 00:00:00 2001 From: Steve Wise Date: Thu, 24 Apr 2014 14:31:53 -0500 Subject: RDMA/cxgb4: Fix endpoint mutex deadlocks In cases where the cm calls c4iw_modify_rc_qp() with the endpoint mutex held, they must be called with internal == 1. rx_data() and process_mpa_reply() are not doing this. This causes a deadlock because c4iw_modify_rc_qp() might call c4iw_ep_disconnect() in some !internal cases, and c4iw_ep_disconnect() acquires the endpoint mutex. The design was intended to only do the disconnect for !internal calls. Change rx_data(), FPDU_MODE case, to call c4iw_modify_rc_qp() with internal == 1, and then disconnect only after releasing the mutex. Change process_mpa_reply() to call c4iw_modify_rc_qp(TERMINATE) with internal == 1 and set a new attr flag telling it to send a TERMINATE message. Previously this was implied by !internal. Change process_mpa_reply() to return whether the caller should disconnect after releasing the endpoint mutex. Now rx_data() will do the disconnect in the cases where process_mpa_reply() wants to disconnect after the TERMINATE is sent. Change c4iw_modify_rc_qp() RTS->TERM to only disconnect if !internal, and to send a TERMINATE message if attrs->send_term is 1. Change abort_connection() to not aquire the ep mutex for setting the state, and make all calls to abort_connection() do so with the mutex held. Signed-off-by: Steve Wise Signed-off-by: Roland Dreier --- drivers/infiniband/hw/cxgb4/cm.c | 31 ++++++++++++++++++++----------- drivers/infiniband/hw/cxgb4/iw_cxgb4.h | 1 + drivers/infiniband/hw/cxgb4/qp.c | 9 +++++---- 3 files changed, 26 insertions(+), 15 deletions(-) (limited to 'drivers') diff --git a/drivers/infiniband/hw/cxgb4/cm.c b/drivers/infiniband/hw/cxgb4/cm.c index 185452abf32c..f9b04bc7e602 100644 --- a/drivers/infiniband/hw/cxgb4/cm.c +++ b/drivers/infiniband/hw/cxgb4/cm.c @@ -996,7 +996,7 @@ static void close_complete_upcall(struct c4iw_ep *ep, int status) static int abort_connection(struct c4iw_ep *ep, struct sk_buff *skb, gfp_t gfp) { PDBG("%s ep %p tid %u\n", __func__, ep, ep->hwtid); - state_set(&ep->com, ABORTING); + __state_set(&ep->com, ABORTING); set_bit(ABORT_CONN, &ep->com.history); return send_abort(ep, skb, gfp); } @@ -1154,7 +1154,7 @@ static int update_rx_credits(struct c4iw_ep *ep, u32 credits) return credits; } -static void process_mpa_reply(struct c4iw_ep *ep, struct sk_buff *skb) +static int process_mpa_reply(struct c4iw_ep *ep, struct sk_buff *skb) { struct mpa_message *mpa; struct mpa_v2_conn_params *mpa_v2_params; @@ -1164,6 +1164,7 @@ static void process_mpa_reply(struct c4iw_ep *ep, struct sk_buff *skb) struct c4iw_qp_attributes attrs; enum c4iw_qp_attr_mask mask; int err; + int disconnect = 0; PDBG("%s ep %p tid %u\n", __func__, ep, ep->hwtid); @@ -1173,7 +1174,7 @@ static void process_mpa_reply(struct c4iw_ep *ep, struct sk_buff *skb) * will abort the connection. */ if (stop_ep_timer(ep)) - return; + return 0; /* * If we get more than the supported amount of private data @@ -1195,7 +1196,7 @@ static void process_mpa_reply(struct c4iw_ep *ep, struct sk_buff *skb) * if we don't even have the mpa message, then bail. */ if (ep->mpa_pkt_len < sizeof(*mpa)) - return; + return 0; mpa = (struct mpa_message *) ep->mpa_pkt; /* Validate MPA header. */ @@ -1235,7 +1236,7 @@ static void process_mpa_reply(struct c4iw_ep *ep, struct sk_buff *skb) * We'll continue process when more data arrives. */ if (ep->mpa_pkt_len < (sizeof(*mpa) + plen)) - return; + return 0; if (mpa->flags & MPA_REJECT) { err = -ECONNREFUSED; @@ -1337,9 +1338,11 @@ static void process_mpa_reply(struct c4iw_ep *ep, struct sk_buff *skb) attrs.layer_etype = LAYER_MPA | DDP_LLP; attrs.ecode = MPA_NOMATCH_RTR; attrs.next_state = C4IW_QP_STATE_TERMINATE; + attrs.send_term = 1; err = c4iw_modify_qp(ep->com.qp->rhp, ep->com.qp, - C4IW_QP_ATTR_NEXT_STATE, &attrs, 0); + C4IW_QP_ATTR_NEXT_STATE, &attrs, 1); err = -ENOMEM; + disconnect = 1; goto out; } @@ -1355,9 +1358,11 @@ static void process_mpa_reply(struct c4iw_ep *ep, struct sk_buff *skb) attrs.layer_etype = LAYER_MPA | DDP_LLP; attrs.ecode = MPA_INSUFF_IRD; attrs.next_state = C4IW_QP_STATE_TERMINATE; + attrs.send_term = 1; err = c4iw_modify_qp(ep->com.qp->rhp, ep->com.qp, - C4IW_QP_ATTR_NEXT_STATE, &attrs, 0); + C4IW_QP_ATTR_NEXT_STATE, &attrs, 1); err = -ENOMEM; + disconnect = 1; goto out; } goto out; @@ -1366,7 +1371,7 @@ err: send_abort(ep, skb, GFP_KERNEL); out: connect_reply_upcall(ep, err); - return; + return disconnect; } static void process_mpa_request(struct c4iw_ep *ep, struct sk_buff *skb) @@ -1524,6 +1529,7 @@ static int rx_data(struct c4iw_dev *dev, struct sk_buff *skb) unsigned int tid = GET_TID(hdr); struct tid_info *t = dev->rdev.lldi.tids; __u8 status = hdr->status; + int disconnect = 0; ep = lookup_tid(t, tid); if (!ep) @@ -1539,7 +1545,7 @@ static int rx_data(struct c4iw_dev *dev, struct sk_buff *skb) switch (ep->com.state) { case MPA_REQ_SENT: ep->rcv_seq += dlen; - process_mpa_reply(ep, skb); + disconnect = process_mpa_reply(ep, skb); break; case MPA_REQ_WAIT: ep->rcv_seq += dlen; @@ -1555,13 +1561,16 @@ static int rx_data(struct c4iw_dev *dev, struct sk_buff *skb) ep->com.state, ep->hwtid, status); attrs.next_state = C4IW_QP_STATE_TERMINATE; c4iw_modify_qp(ep->com.qp->rhp, ep->com.qp, - C4IW_QP_ATTR_NEXT_STATE, &attrs, 0); + C4IW_QP_ATTR_NEXT_STATE, &attrs, 1); + disconnect = 1; break; } default: break; } mutex_unlock(&ep->com.mutex); + if (disconnect) + c4iw_ep_disconnect(ep, 0, GFP_KERNEL); return 0; } @@ -3482,9 +3491,9 @@ static void process_timeout(struct c4iw_ep *ep) __func__, ep, ep->hwtid, ep->com.state); abort = 0; } - mutex_unlock(&ep->com.mutex); if (abort) abort_connection(ep, NULL, GFP_KERNEL); + mutex_unlock(&ep->com.mutex); c4iw_put_ep(&ep->com); } diff --git a/drivers/infiniband/hw/cxgb4/iw_cxgb4.h b/drivers/infiniband/hw/cxgb4/iw_cxgb4.h index 7b8c5806a09d..7474b490760a 100644 --- a/drivers/infiniband/hw/cxgb4/iw_cxgb4.h +++ b/drivers/infiniband/hw/cxgb4/iw_cxgb4.h @@ -435,6 +435,7 @@ struct c4iw_qp_attributes { u8 ecode; u16 sq_db_inc; u16 rq_db_inc; + u8 send_term; }; struct c4iw_qp { diff --git a/drivers/infiniband/hw/cxgb4/qp.c b/drivers/infiniband/hw/cxgb4/qp.c index 7b5114cb486f..f18ef34e8184 100644 --- a/drivers/infiniband/hw/cxgb4/qp.c +++ b/drivers/infiniband/hw/cxgb4/qp.c @@ -1388,11 +1388,12 @@ int c4iw_modify_qp(struct c4iw_dev *rhp, struct c4iw_qp *qhp, qhp->attr.layer_etype = attrs->layer_etype; qhp->attr.ecode = attrs->ecode; ep = qhp->ep; - disconnect = 1; - c4iw_get_ep(&qhp->ep->com); - if (!internal) + if (!internal) { + c4iw_get_ep(&qhp->ep->com); terminate = 1; - else { + disconnect = 1; + } else { + terminate = qhp->attr.send_term; ret = rdma_fini(rhp, qhp, ep); if (ret) goto err; -- cgit v1.2.1 From 92e5011ab0e073ab8fbb726c11529021e5e63973 Mon Sep 17 00:00:00 2001 From: Steve Wise Date: Thu, 24 Apr 2014 14:31:59 -0500 Subject: RDMA/cxgb4: Force T5 connections to use TAHOE congestion control This is required to work around a T5 HW issue. Signed-off-by: Steve Wise Signed-off-by: Roland Dreier --- drivers/infiniband/hw/cxgb4/cm.c | 8 ++++++++ drivers/infiniband/hw/cxgb4/t4fw_ri_api.h | 14 ++++++++++++++ 2 files changed, 22 insertions(+) (limited to 'drivers') diff --git a/drivers/infiniband/hw/cxgb4/cm.c b/drivers/infiniband/hw/cxgb4/cm.c index f9b04bc7e602..1f863a96a480 100644 --- a/drivers/infiniband/hw/cxgb4/cm.c +++ b/drivers/infiniband/hw/cxgb4/cm.c @@ -587,6 +587,10 @@ static int send_connect(struct c4iw_ep *ep) opt2 |= SACK_EN(1); if (wscale && enable_tcp_window_scaling) opt2 |= WND_SCALE_EN(1); + if (is_t5(ep->com.dev->rdev.lldi.adapter_type)) { + opt2 |= T5_OPT_2_VALID; + opt2 |= V_CONG_CNTRL(CONG_ALG_TAHOE); + } t4_set_arp_err_handler(skb, NULL, act_open_req_arp_failure); if (is_t4(ep->com.dev->rdev.lldi.adapter_type)) { @@ -2018,6 +2022,10 @@ static void accept_cr(struct c4iw_ep *ep, struct sk_buff *skb, if (tcph->ece && tcph->cwr) opt2 |= CCTRL_ECN(1); } + if (is_t5(ep->com.dev->rdev.lldi.adapter_type)) { + opt2 |= T5_OPT_2_VALID; + opt2 |= V_CONG_CNTRL(CONG_ALG_TAHOE); + } rpl = cplhdr(skb); INIT_TP_WR(rpl, ep->hwtid); diff --git a/drivers/infiniband/hw/cxgb4/t4fw_ri_api.h b/drivers/infiniband/hw/cxgb4/t4fw_ri_api.h index dc193c292671..6121ca08fe58 100644 --- a/drivers/infiniband/hw/cxgb4/t4fw_ri_api.h +++ b/drivers/infiniband/hw/cxgb4/t4fw_ri_api.h @@ -836,4 +836,18 @@ struct ulptx_idata { #define V_RX_DACK_CHANGE(x) ((x) << S_RX_DACK_CHANGE) #define F_RX_DACK_CHANGE V_RX_DACK_CHANGE(1U) +enum { /* TCP congestion control algorithms */ + CONG_ALG_RENO, + CONG_ALG_TAHOE, + CONG_ALG_NEWRENO, + CONG_ALG_HIGHSPEED +}; + +#define S_CONG_CNTRL 14 +#define M_CONG_CNTRL 0x3 +#define V_CONG_CNTRL(x) ((x) << S_CONG_CNTRL) +#define G_CONG_CNTRL(x) (((x) >> S_CONG_CNTRL) & M_CONG_CNTRL) + +#define T5_OPT_2_VALID (1 << 31) + #endif /* _T4FW_RI_API_H_ */ -- cgit v1.2.1 From c2f9da92f2fd6dbf8f40ef4d5e00db688cc0416a Mon Sep 17 00:00:00 2001 From: Steve Wise Date: Thu, 24 Apr 2014 14:32:04 -0500 Subject: RDMA/cxgb4: Only allow kernel db ringing for T4 devs The whole db drop avoidance stuff is for T4 only. So we cannot allow that to be enabled for T5 devices. Signed-off-by: Steve Wise Signed-off-by: Roland Dreier --- drivers/infiniband/hw/cxgb4/qp.c | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'drivers') diff --git a/drivers/infiniband/hw/cxgb4/qp.c b/drivers/infiniband/hw/cxgb4/qp.c index f18ef34e8184..086f62f5dc9e 100644 --- a/drivers/infiniband/hw/cxgb4/qp.c +++ b/drivers/infiniband/hw/cxgb4/qp.c @@ -1777,11 +1777,15 @@ int c4iw_ib_modify_qp(struct ib_qp *ibqp, struct ib_qp_attr *attr, /* * Use SQ_PSN and RQ_PSN to pass in IDX_INC values for * ringing the queue db when we're in DB_FULL mode. + * Only allow this on T4 devices. */ attrs.sq_db_inc = attr->sq_psn; attrs.rq_db_inc = attr->rq_psn; mask |= (attr_mask & IB_QP_SQ_PSN) ? C4IW_QP_ATTR_SQ_DB : 0; mask |= (attr_mask & IB_QP_RQ_PSN) ? C4IW_QP_ATTR_RQ_DB : 0; + if (is_t5(to_c4iw_qp(ibqp)->rhp->rdev.lldi.adapter_type) && + (mask & (C4IW_QP_ATTR_SQ_DB|C4IW_QP_ATTR_RQ_DB))) + return -EINVAL; return c4iw_modify_qp(rhp, qhp, mask, &attrs, 0); } -- cgit v1.2.1 From 7d0a73a40c5ceb7524aa6a43f108de0dd8dbe3f0 Mon Sep 17 00:00:00 2001 From: Hariprasad S Date: Sat, 26 Apr 2014 00:51:18 +0530 Subject: RDMA/cxgb4: Update Kconfig to include Chelsio T5 adapter Signed-off-by: Hariprasad Shenai Signed-off-by: Roland Dreier --- drivers/infiniband/hw/cxgb4/Kconfig | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/infiniband/hw/cxgb4/Kconfig b/drivers/infiniband/hw/cxgb4/Kconfig index d4e8983fba53..23f38cf2c5cd 100644 --- a/drivers/infiniband/hw/cxgb4/Kconfig +++ b/drivers/infiniband/hw/cxgb4/Kconfig @@ -1,10 +1,10 @@ config INFINIBAND_CXGB4 - tristate "Chelsio T4 RDMA Driver" + tristate "Chelsio T4/T5 RDMA Driver" depends on CHELSIO_T4 && INET && (IPV6 || IPV6=n) select GENERIC_ALLOCATOR ---help--- - This is an iWARP/RDMA driver for the Chelsio T4 1GbE and - 10GbE adapters. + This is an iWARP/RDMA driver for the Chelsio T4 and T5 + 1GbE, 10GbE adapters and T5 40GbE adapter. For general information about Chelsio and our products, visit our website at . -- cgit v1.2.1 From 82a5619410d4c4df65c04272db198eca5a867c18 Mon Sep 17 00:00:00 2001 From: Lorenzo Pieralisi Date: Tue, 8 Apr 2014 10:04:32 +0100 Subject: clocksource: arch_arm_timer: Fix age-old arch timer C3STOP detection issue ARM arch timers are tightly coupled with the CPU logic and lose context on platform implementing HW power management when cores are powered down at run-time. Marking the arch timers as C3STOP regardless of power management capabilities causes issues on platforms with no power management, since in that case the arch timers cannot possibly enter states where the timer loses context at runtime and therefore can always be used as a high resolution clockevent device. In order to fix the C3STOP issue in a way compliant with how real HW works, this patch adds a boolean property to the arch timer bindings to define if the arch timer is managed by an always-on power domain. This power domain is present on all ARM platforms to date, and manages HW that must not be turned off, whatever the state of other HW components (eg power controller). On platforms with no power management capabilities, it is the only power domain present, which encompasses and manages power supply for all HW components in the system. If the timer is powered by the always-on power domain, the always-on property must be present in the bindings which means that the timer cannot be shutdown at runtime, so it is not a C3STOP clockevent device. If the timer binding does not contain the always-on property, the timer is assumed to be power-gateable, hence it must be defined as a C3STOP clockevent device. Cc: Daniel Lezcano Cc: Magnus Damm Cc: Marc Carino Cc: Mark Rutland Acked-by: Marc Zyngier Acked-by: Rob Herring Signed-off-by: Lorenzo Pieralisi Signed-off-by: Daniel Lezcano --- drivers/clocksource/arm_arch_timer.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/clocksource/arm_arch_timer.c b/drivers/clocksource/arm_arch_timer.c index 57e823c44d2a..5163ec13429d 100644 --- a/drivers/clocksource/arm_arch_timer.c +++ b/drivers/clocksource/arm_arch_timer.c @@ -66,6 +66,7 @@ static int arch_timer_ppi[MAX_TIMER_PPI]; static struct clock_event_device __percpu *arch_timer_evt; static bool arch_timer_use_virtual = true; +static bool arch_timer_c3stop; static bool arch_timer_mem_use_virtual; /* @@ -263,7 +264,8 @@ static void __arch_timer_setup(unsigned type, clk->features = CLOCK_EVT_FEAT_ONESHOT; if (type == ARCH_CP15_TIMER) { - clk->features |= CLOCK_EVT_FEAT_C3STOP; + if (arch_timer_c3stop) + clk->features |= CLOCK_EVT_FEAT_C3STOP; clk->name = "arch_sys_timer"; clk->rating = 450; clk->cpumask = cpumask_of(smp_processor_id()); @@ -665,6 +667,8 @@ static void __init arch_timer_init(struct device_node *np) } } + arch_timer_c3stop = !of_property_read_bool(np, "always-on"); + arch_timer_register(); arch_timer_common_init(); } -- cgit v1.2.1 From 9afa27ce9414c92e271b0d7eec937bd9f5565da5 Mon Sep 17 00:00:00 2001 From: Alexander Shiyan Date: Sat, 26 Apr 2014 09:32:16 +0400 Subject: clocksource: nspire: Fix compiler warning CC drivers/clocksource/zevio-timer.o drivers/clocksource/zevio-timer.c:215:1: warning: comparison of distinct pointer types lacks a cast [enabled by default] Signed-off-by: Alexander Shiyan Signed-off-by: Daniel Lezcano --- drivers/clocksource/zevio-timer.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/clocksource/zevio-timer.c b/drivers/clocksource/zevio-timer.c index ca81809d159d..7ce442148c3f 100644 --- a/drivers/clocksource/zevio-timer.c +++ b/drivers/clocksource/zevio-timer.c @@ -212,4 +212,9 @@ error_free: return ret; } -CLOCKSOURCE_OF_DECLARE(zevio_timer, "lsi,zevio-timer", zevio_timer_add); +static void __init zevio_timer_init(struct device_node *node) +{ + BUG_ON(zevio_timer_add(node)); +} + +CLOCKSOURCE_OF_DECLARE(zevio_timer, "lsi,zevio-timer", zevio_timer_init); -- cgit v1.2.1 From 58b116bce13612e5aa6fcd49ecbd4cf8bb59e835 Mon Sep 17 00:00:00 2001 From: Grant Likely Date: Tue, 29 Apr 2014 12:05:22 +0100 Subject: drivercore: deferral race condition fix When the kernel is built with CONFIG_PREEMPT it is possible to reach a state when all modules loaded but some driver still stuck in the deferred list and there is a need for external event to kick the deferred queue to probe these drivers. The issue has been observed on embedded systems with CONFIG_PREEMPT enabled, audio support built as modules and using nfsroot for root filesystem. The following log fragment shows such sequence when all audio modules were loaded but the sound card is not present since the machine driver has failed to probe due to missing dependency during it's probe. The board is am335x-evmsk (McASP<->tlv320aic3106 codec) with davinci-evm machine driver: ... [ 12.615118] davinci-mcasp 4803c000.mcasp: davinci_mcasp_probe: ENTER [ 12.719969] davinci_evm sound.3: davinci_evm_probe: ENTER [ 12.725753] davinci_evm sound.3: davinci_evm_probe: snd_soc_register_card [ 12.753846] davinci-mcasp 4803c000.mcasp: davinci_mcasp_probe: snd_soc_register_component [ 12.922051] davinci-mcasp 4803c000.mcasp: davinci_mcasp_probe: snd_soc_register_component DONE [ 12.950839] davinci_evm sound.3: ASoC: platform (null) not registered [ 12.957898] davinci_evm sound.3: davinci_evm_probe: snd_soc_register_card DONE (-517) [ 13.099026] davinci-mcasp 4803c000.mcasp: Kicking the deferred list [ 13.177838] davinci-mcasp 4803c000.mcasp: really_probe: probe_count = 2 [ 13.194130] davinci_evm sound.3: snd_soc_register_card failed (-517) [ 13.346755] davinci_mcasp_driver_init: LEAVE [ 13.377446] platform sound.3: Driver davinci_evm requests probe deferral [ 13.592527] platform sound.3: really_probe: probe_count = 0 In the log the machine driver enters it's probe at 12.719969 (this point it has been removed from the deferred lists). McASP driver already executing it's probing (since 12.615118). The machine driver tries to construct the sound card (12.950839) but did not found one of the components so it fails. After this McASP driver registers all the ASoC components (the machine driver still in it's probe function after it failed to construct the card) and the deferred work is prepared at 13.099026 (note that this time the machine driver is not in the lists so it is not going to be handled when the work is executing). Lastly the machine driver exit from it's probe and the core places it to the deferred list but there will be no other driver going to load and the deferred queue is not going to be kicked again - till we have external event like connecting USB stick, etc. The proposed solution is to try the deferred queue once more when the last driver is asking for deferring and we had drivers loaded while this last driver was probing. This way we can avoid drivers stuck in the deferred queue. Signed-off-by: Grant Likely Reviewed-by: Peter Ujfalusi Tested-by: Peter Ujfalusi Acked-by: Greg Kroah-Hartman Cc: Mark Brown Cc: Stable # v3.4+ --- drivers/base/dd.c | 17 +++++++++++++++++ 1 file changed, 17 insertions(+) (limited to 'drivers') diff --git a/drivers/base/dd.c b/drivers/base/dd.c index 8986b9f22781..62ec61e8f84a 100644 --- a/drivers/base/dd.c +++ b/drivers/base/dd.c @@ -52,6 +52,7 @@ static DEFINE_MUTEX(deferred_probe_mutex); static LIST_HEAD(deferred_probe_pending_list); static LIST_HEAD(deferred_probe_active_list); static struct workqueue_struct *deferred_wq; +static atomic_t deferred_trigger_count = ATOMIC_INIT(0); /** * deferred_probe_work_func() - Retry probing devices in the active list. @@ -135,6 +136,17 @@ static bool driver_deferred_probe_enable = false; * This functions moves all devices from the pending list to the active * list and schedules the deferred probe workqueue to process them. It * should be called anytime a driver is successfully bound to a device. + * + * Note, there is a race condition in multi-threaded probe. In the case where + * more than one device is probing at the same time, it is possible for one + * probe to complete successfully while another is about to defer. If the second + * depends on the first, then it will get put on the pending list after the + * trigger event has already occured and will be stuck there. + * + * The atomic 'deferred_trigger_count' is used to determine if a successful + * trigger has occurred in the midst of probing a driver. If the trigger count + * changes in the midst of a probe, then deferred processing should be triggered + * again. */ static void driver_deferred_probe_trigger(void) { @@ -147,6 +159,7 @@ static void driver_deferred_probe_trigger(void) * into the active list so they can be retried by the workqueue */ mutex_lock(&deferred_probe_mutex); + atomic_inc(&deferred_trigger_count); list_splice_tail_init(&deferred_probe_pending_list, &deferred_probe_active_list); mutex_unlock(&deferred_probe_mutex); @@ -265,6 +278,7 @@ static DECLARE_WAIT_QUEUE_HEAD(probe_waitqueue); static int really_probe(struct device *dev, struct device_driver *drv) { int ret = 0; + int local_trigger_count = atomic_read(&deferred_trigger_count); atomic_inc(&probe_count); pr_debug("bus: '%s': %s: probing driver %s with device %s\n", @@ -310,6 +324,9 @@ probe_failed: /* Driver requested deferred probing */ dev_info(dev, "Driver %s requests probe deferral\n", drv->name); driver_deferred_probe_add(dev); + /* Did a trigger occur while probing? Need to re-trigger if yes */ + if (local_trigger_count != atomic_read(&deferred_trigger_count)) + driver_deferred_probe_trigger(); } else if (ret != -ENODEV && ret != -ENXIO) { /* driver matched but the probe failed */ printk(KERN_WARNING -- cgit v1.2.1 From fbcde3d8b9c2d97704b8ca299e5266147b24c8ee Mon Sep 17 00:00:00 2001 From: Mike Snitzer Date: Tue, 29 Apr 2014 11:22:04 -0400 Subject: dm thin: use INIT_WORK_ONSTACK in noflush_work to avoid ODEBUG warning MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Use INIT_WORK_ONSTACK to silence "ODEBUG: object is on stack, but not annotated". Reported-by: Zdeněk Kabeláč Signed-off-by: Mike Snitzer Acked-by: Joe Thornber --- drivers/md/dm-thin.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/md/dm-thin.c b/drivers/md/dm-thin.c index 28fc282b61b2..13abade76ad9 100644 --- a/drivers/md/dm-thin.c +++ b/drivers/md/dm-thin.c @@ -1625,7 +1625,7 @@ static void noflush_work(struct thin_c *tc, void (*fn)(struct work_struct *)) { struct noflush_work w; - INIT_WORK(&w.worker, fn); + INIT_WORK_ONSTACK(&w.worker, fn); w.tc = tc; atomic_set(&w.complete, 0); init_waitqueue_head(&w.wait); -- cgit v1.2.1 From cfa7c862982b431add7f2b362526bf31372fc7b0 Mon Sep 17 00:00:00 2001 From: Daniel Vetter Date: Tue, 29 Apr 2014 11:53:58 +0200 Subject: drm/i915: Sanitize the enable_ppgtt module option once Otherwise we'll end up spamming dmesg on every context creation on snb with vt-d enabled. This regression was introduced in commit 246cbfb5fb9a1ca0997fbb135464c1ff5bb9c549 Author: Ben Widawsky Date: Fri Dec 6 14:11:14 2013 -0800 drm/i915: Reorganize intel_enable_ppgtt As the i915.enable_ppgtt is read-only it cannot be changed after the module is loaded and so we can perform an early sanitization of the values. v2: - Add comment and pimp commit message (Chris) - Use the param consistently (Jani) v3: - Fix init sequence on pre-gen6 by moving the sanitize_ppgtt call to gtt_init. Fixes boot hangs on pre-gen6. - Add a debug output for the sanitize ppgtt mode. References: https://lkml.org/lkml/2014/4/17/599 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=77916 Cc: Alessandro Suardi Cc: Ben Widawsky Cc: Chris Wilson Reviewed-by: Chris Wilson Signed-off-by: Daniel Vetter Signed-off-by: Jani Nikula --- drivers/gpu/drm/i915/i915_gem_gtt.c | 32 +++++++++++++++++++++++++------- 1 file changed, 25 insertions(+), 7 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/i915/i915_gem_gtt.c b/drivers/gpu/drm/i915/i915_gem_gtt.c index 62a5c3627b90..154b0f8bb88d 100644 --- a/drivers/gpu/drm/i915/i915_gem_gtt.c +++ b/drivers/gpu/drm/i915/i915_gem_gtt.c @@ -34,25 +34,35 @@ static void gen8_setup_private_ppat(struct drm_i915_private *dev_priv); bool intel_enable_ppgtt(struct drm_device *dev, bool full) { - if (i915.enable_ppgtt == 0 || !HAS_ALIASING_PPGTT(dev)) + if (i915.enable_ppgtt == 0) return false; if (i915.enable_ppgtt == 1 && full) return false; + return true; +} + +static int sanitize_enable_ppgtt(struct drm_device *dev, int enable_ppgtt) +{ + if (enable_ppgtt == 0 || !HAS_ALIASING_PPGTT(dev)) + return 0; + + if (enable_ppgtt == 1) + return 1; + + if (enable_ppgtt == 2 && HAS_PPGTT(dev)) + return 2; + #ifdef CONFIG_INTEL_IOMMU /* Disable ppgtt on SNB if VT-d is on. */ if (INTEL_INFO(dev)->gen == 6 && intel_iommu_gfx_mapped) { DRM_INFO("Disabling PPGTT because VT-d is on\n"); - return false; + return 0; } #endif - /* Full ppgtt disabled by default for now due to issues. */ - if (full) - return HAS_PPGTT(dev) && (i915.enable_ppgtt == 2); - else - return HAS_ALIASING_PPGTT(dev); + return HAS_ALIASING_PPGTT(dev) ? 1 : 0; } #define GEN6_PPGTT_PD_ENTRIES 512 @@ -2031,6 +2041,14 @@ int i915_gem_gtt_init(struct drm_device *dev) gtt->base.total >> 20); DRM_DEBUG_DRIVER("GMADR size = %ldM\n", gtt->mappable_end >> 20); DRM_DEBUG_DRIVER("GTT stolen size = %zdM\n", gtt->stolen_size >> 20); + /* + * i915.enable_ppgtt is read-only, so do an early pass to validate the + * user's requested state against the hardware/driver capabilities. We + * do this now so that we can print out any log messages once rather + * than every time we check intel_enable_ppgtt(). + */ + i915.enable_ppgtt = sanitize_enable_ppgtt(dev, i915.enable_ppgtt); + DRM_DEBUG_DRIVER("ppgtt mode: %i\n", i915.enable_ppgtt); return 0; } -- cgit v1.2.1 From 3eba563e280101209bad27d40bfc83ddf1489234 Mon Sep 17 00:00:00 2001 From: Kieran Clancy Date: Wed, 30 Apr 2014 00:21:20 +0930 Subject: ACPI / EC: Process rather than discard events in acpi_ec_clear Address a regression caused by commit ad332c8a4533: (ACPI / EC: Clear stale EC events on Samsung systems) After the earlier patch, there was found to be a race condition on some earlier Samsung systems (N150/N210/N220). The function acpi_ec_clear was sometimes discarding a new EC event before its GPE was triggered by the system. In the case of these systems, this meant that the "lid open" event was not registered on resume if that was the cause of the wake, leading to problems when attempting to close the lid to suspend again. After testing on a number of Samsung systems, both those affected by the previous EC bug and those affected by the race condition, it seemed that the best course of action was to process rather than discard the events. On Samsung systems which accumulate stale EC events, there does not seem to be any adverse side-effects of running the associated _Q methods. This patch adds an argument to the static function acpi_ec_sync_query so that it may be used within the acpi_ec_clear loop in place of acpi_ec_query_unlocked which was used previously. With thanks to Stefan Biereigel for reporting the issue, and for all the people who helped test the new patch on affected systems. Fixes: ad332c8a4533 (ACPI / EC: Clear stale EC events on Samsung systems) References: https://lkml.kernel.org/r/532FE3B2.9060808@biereigel-wb.de References: https://bugzilla.kernel.org/show_bug.cgi?id=44161#c173 Reported-by: Stefan Biereigel Signed-off-by: Kieran Clancy Tested-by: Stefan Biereigel Tested-by: Dennis Jansen Tested-by: Nicolas Porcel Tested-by: Maurizio D'Addona Tested-by: Juan Manuel Cabo Tested-by: Giannis Koutsou Tested-by: Kieran Clancy Cc: 3.14+ # 3.14+ Signed-off-by: Rafael J. Wysocki --- drivers/acpi/ec.c | 21 ++++++++++++--------- 1 file changed, 12 insertions(+), 9 deletions(-) (limited to 'drivers') diff --git a/drivers/acpi/ec.c b/drivers/acpi/ec.c index d7d32c28829b..ad11ba4a412d 100644 --- a/drivers/acpi/ec.c +++ b/drivers/acpi/ec.c @@ -206,13 +206,13 @@ unlock: spin_unlock_irqrestore(&ec->lock, flags); } -static int acpi_ec_sync_query(struct acpi_ec *ec); +static int acpi_ec_sync_query(struct acpi_ec *ec, u8 *data); static int ec_check_sci_sync(struct acpi_ec *ec, u8 state) { if (state & ACPI_EC_FLAG_SCI) { if (!test_and_set_bit(EC_FLAGS_QUERY_PENDING, &ec->flags)) - return acpi_ec_sync_query(ec); + return acpi_ec_sync_query(ec, NULL); } return 0; } @@ -443,10 +443,8 @@ acpi_handle ec_get_handle(void) EXPORT_SYMBOL(ec_get_handle); -static int acpi_ec_query_unlocked(struct acpi_ec *ec, u8 *data); - /* - * Clears stale _Q events that might have accumulated in the EC. + * Process _Q events that might have accumulated in the EC. * Run with locked ec mutex. */ static void acpi_ec_clear(struct acpi_ec *ec) @@ -455,7 +453,7 @@ static void acpi_ec_clear(struct acpi_ec *ec) u8 value = 0; for (i = 0; i < ACPI_EC_CLEAR_MAX; i++) { - status = acpi_ec_query_unlocked(ec, &value); + status = acpi_ec_sync_query(ec, &value); if (status || !value) break; } @@ -582,13 +580,18 @@ static void acpi_ec_run(void *cxt) kfree(handler); } -static int acpi_ec_sync_query(struct acpi_ec *ec) +static int acpi_ec_sync_query(struct acpi_ec *ec, u8 *data) { u8 value = 0; int status; struct acpi_ec_query_handler *handler, *copy; - if ((status = acpi_ec_query_unlocked(ec, &value))) + + status = acpi_ec_query_unlocked(ec, &value); + if (data) + *data = value; + if (status) return status; + list_for_each_entry(handler, &ec->list, node) { if (value == handler->query_bit) { /* have custom handler for this bit */ @@ -612,7 +615,7 @@ static void acpi_ec_gpe_query(void *ec_cxt) if (!ec) return; mutex_lock(&ec->mutex); - acpi_ec_sync_query(ec); + acpi_ec_sync_query(ec, NULL); mutex_unlock(&ec->mutex); } -- cgit v1.2.1 From b3413afb4a8995a67f5df6218c6d0ff3a53a6978 Mon Sep 17 00:00:00 2001 From: Bjorn Helgaas Date: Tue, 29 Apr 2014 00:20:34 +0200 Subject: PNP: Fix compile error in quirks.c Fix the compile error: drivers/pnp/quirks.c:393:2: error: implicit declaration of function 'pcibios_bus_to_resource' that occurs when building with CONFIG_PCI unset. The quirk is only relevent to Intel devices, so we could use "#if defined(CONFIG_X86) && defined(CONFIG_PCI)" instead, but testing CONFIG_X86 is not strictly necessary. Fixes: cb171f7abb9a (PNP: Work around BIOS defects in Intel MCH area reporting) Reported-by: Randy Dunlap Signed-off-by: Bjorn Helgaas Signed-off-by: Rafael J. Wysocki --- drivers/pnp/quirks.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/pnp/quirks.c b/drivers/pnp/quirks.c index 3736bc408adb..ebf0d6710b5a 100644 --- a/drivers/pnp/quirks.c +++ b/drivers/pnp/quirks.c @@ -335,7 +335,7 @@ static void quirk_amd_mmconfig_area(struct pnp_dev *dev) } #endif -#ifdef CONFIG_X86 +#ifdef CONFIG_PCI /* Device IDs of parts that have 32KB MCH space */ static const unsigned int mch_quirk_devices[] = { 0x0154, /* Ivy Bridge */ @@ -440,7 +440,7 @@ static struct pnp_fixup pnp_fixups[] = { #ifdef CONFIG_AMD_NB {"PNP0c01", quirk_amd_mmconfig_area}, #endif -#ifdef CONFIG_X86 +#ifdef CONFIG_PCI {"PNP0c02", quirk_intel_mch}, #endif {""} -- cgit v1.2.1 From 25c8b5c3048cb6c98d402ca8d4735ccf910f727c Mon Sep 17 00:00:00 2001 From: Andrzej Hajda Date: Tue, 15 Apr 2014 15:33:01 +0200 Subject: drm/exynos: balance framebuffer refcount exynos_drm_crtc_mode_set assigns primary framebuffer to plane without taking reference. Then during framebuffer removal it is dereferenced twice, causing oops. The patch fixes it. Signed-off-by: Andrzej Hajda Signed-off-by: Inki Dae Signed-off-by: Dave Airlie --- drivers/gpu/drm/exynos/exynos_drm_crtc.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/gpu/drm/exynos/exynos_drm_crtc.c b/drivers/gpu/drm/exynos/exynos_drm_crtc.c index e930d4fe29c7..1ef5ab9c9d51 100644 --- a/drivers/gpu/drm/exynos/exynos_drm_crtc.c +++ b/drivers/gpu/drm/exynos/exynos_drm_crtc.c @@ -145,6 +145,7 @@ exynos_drm_crtc_mode_set(struct drm_crtc *crtc, struct drm_display_mode *mode, plane->crtc = crtc; plane->fb = crtc->primary->fb; + drm_framebuffer_reference(plane->fb); return 0; } -- cgit v1.2.1 From 293d3f6a70704691c3539bc3630ba1acbabc5c43 Mon Sep 17 00:00:00 2001 From: Jingoo Han Date: Thu, 17 Apr 2014 19:08:40 +0900 Subject: drm/exynos: dsi: use IS_ERR() to check devm_ioremap_resource() results devm_ioremap_resource() returns an error pointer, not NULL. Thus, the result should be checked with IS_ERR(). Signed-off-by: Jingoo Han Signed-off-by: Inki Dae Signed-off-by: Dave Airlie --- drivers/gpu/drm/exynos/exynos_drm_dsi.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/exynos/exynos_drm_dsi.c b/drivers/gpu/drm/exynos/exynos_drm_dsi.c index eb73e3bf2a0c..4ac438187568 100644 --- a/drivers/gpu/drm/exynos/exynos_drm_dsi.c +++ b/drivers/gpu/drm/exynos/exynos_drm_dsi.c @@ -1426,9 +1426,9 @@ static int exynos_dsi_probe(struct platform_device *pdev) res = platform_get_resource(pdev, IORESOURCE_MEM, 0); dsi->reg_base = devm_ioremap_resource(&pdev->dev, res); - if (!dsi->reg_base) { + if (IS_ERR(dsi->reg_base)) { dev_err(&pdev->dev, "failed to remap io region\n"); - return -EADDRNOTAVAIL; + return PTR_ERR(dsi->reg_base); } dsi->phy = devm_phy_get(&pdev->dev, "dsim"); -- cgit v1.2.1 From b8eade24c9891b8f153c40cf310ef4696c873af9 Mon Sep 17 00:00:00 2001 From: Jingoo Han Date: Tue, 22 Apr 2014 14:45:32 +0900 Subject: drm/exynos: use %pad for dma_addr_t Use %pad for dma_addr_t, because a dma_addr_t type can vary based on build options. So, it prevents possible build warnings in printks. Signed-off-by: Jingoo Han Reviewed-by: Daniel Kurtz Signed-off-by: Inki Dae Signed-off-by: Dave Airlie --- drivers/gpu/drm/exynos/exynos_drm_dmabuf.c | 2 +- drivers/gpu/drm/exynos/exynos_drm_vidi.c | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/exynos/exynos_drm_dmabuf.c b/drivers/gpu/drm/exynos/exynos_drm_dmabuf.c index c786cd4f457b..2a3ad24276f8 100644 --- a/drivers/gpu/drm/exynos/exynos_drm_dmabuf.c +++ b/drivers/gpu/drm/exynos/exynos_drm_dmabuf.c @@ -263,7 +263,7 @@ struct drm_gem_object *exynos_dmabuf_prime_import(struct drm_device *drm_dev, buffer->sgt = sgt; exynos_gem_obj->base.import_attach = attach; - DRM_DEBUG_PRIME("dma_addr = 0x%x, size = 0x%lx\n", buffer->dma_addr, + DRM_DEBUG_PRIME("dma_addr = %pad, size = 0x%lx\n", &buffer->dma_addr, buffer->size); return &exynos_gem_obj->base; diff --git a/drivers/gpu/drm/exynos/exynos_drm_vidi.c b/drivers/gpu/drm/exynos/exynos_drm_vidi.c index 7afead9c3f30..852f2dadaebd 100644 --- a/drivers/gpu/drm/exynos/exynos_drm_vidi.c +++ b/drivers/gpu/drm/exynos/exynos_drm_vidi.c @@ -220,7 +220,7 @@ static void vidi_win_commit(struct exynos_drm_manager *mgr, int zpos) win_data->enabled = true; - DRM_DEBUG_KMS("dma_addr = 0x%x\n", win_data->dma_addr); + DRM_DEBUG_KMS("dma_addr = %pad\n", &win_data->dma_addr); if (ctx->vblank_on) schedule_work(&ctx->work); -- cgit v1.2.1 From 9bbfd20abe5025adbb0ac75160bd2e41158a9e83 Mon Sep 17 00:00:00 2001 From: Paulo Zanoni Date: Tue, 29 Apr 2014 11:00:22 -0300 Subject: drm/i915: don't try DP_LINK_BW_5_4 on HSW ULX Because the docs say ULX doesn't support it on HSW. Reviewed-by: Dave Airlie Signed-off-by: Paulo Zanoni Signed-off-by: Jani Nikula --- drivers/gpu/drm/i915/i915_drv.h | 3 +++ drivers/gpu/drm/i915/intel_dp.c | 3 ++- 2 files changed, 5 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h index ec82f6bff122..108e1ec2fa4b 100644 --- a/drivers/gpu/drm/i915/i915_drv.h +++ b/drivers/gpu/drm/i915/i915_drv.h @@ -1954,6 +1954,9 @@ struct drm_i915_cmd_table { #define IS_ULT(dev) (IS_HSW_ULT(dev) || IS_BDW_ULT(dev)) #define IS_HSW_GT3(dev) (IS_HASWELL(dev) && \ ((dev)->pdev->device & 0x00F0) == 0x0020) +/* ULX machines are also considered ULT. */ +#define IS_HSW_ULX(dev) ((dev)->pdev->device == 0x0A0E || \ + (dev)->pdev->device == 0x0A1E) #define IS_PRELIMINARY_HW(intel_info) ((intel_info)->is_preliminary) /* diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c index dfa85289f28f..5ca68aa9f237 100644 --- a/drivers/gpu/drm/i915/intel_dp.c +++ b/drivers/gpu/drm/i915/intel_dp.c @@ -105,7 +105,8 @@ intel_dp_max_link_bw(struct intel_dp *intel_dp) case DP_LINK_BW_2_7: break; case DP_LINK_BW_5_4: /* 1.2 capable displays may advertise higher bw */ - if ((IS_HASWELL(dev) || INTEL_INFO(dev)->gen >= 8) && + if (((IS_HASWELL(dev) && !IS_HSW_ULX(dev)) || + INTEL_INFO(dev)->gen >= 8) && intel_dp->dpcd[DP_DPCD_REV] >= 0x12) max_link_bw = DP_LINK_BW_5_4; else -- cgit v1.2.1 From ae9c25a1826ca9602e89fe9c11700c63ce16d077 Mon Sep 17 00:00:00 2001 From: Felix Fietkau Date: Sun, 27 Apr 2014 16:37:39 +0200 Subject: ath9k_hw: do not lower ANI setting below default on AR913x When the amount of noise fluctuates strongly, low immunity settings can sometimes disrupt signal detection on AR913x chips. When that happens, no OFDM/CCK errors are reported anymore, and ANI tunes the radio to the lowest immunity settings. Usually rx/tx fails as well in that case. To fix this, keep noise immunity settings at or above ANI default level, which will keep radio parameters at or above INI values. Signed-off-by: Felix Fietkau Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ath9k/ani.c | 6 ++++++ 1 file changed, 6 insertions(+) (limited to 'drivers') diff --git a/drivers/net/wireless/ath/ath9k/ani.c b/drivers/net/wireless/ath/ath9k/ani.c index 6d47783f2e5b..ba502a2d199b 100644 --- a/drivers/net/wireless/ath/ath9k/ani.c +++ b/drivers/net/wireless/ath/ath9k/ani.c @@ -155,6 +155,9 @@ static void ath9k_hw_set_ofdm_nil(struct ath_hw *ah, u8 immunityLevel, ATH9K_ANI_RSSI_THR_LOW, ATH9K_ANI_RSSI_THR_HIGH); + if (AR_SREV_9100(ah) && immunityLevel < ATH9K_ANI_OFDM_DEF_LEVEL) + immunityLevel = ATH9K_ANI_OFDM_DEF_LEVEL; + if (!scan) aniState->ofdmNoiseImmunityLevel = immunityLevel; @@ -235,6 +238,9 @@ static void ath9k_hw_set_cck_nil(struct ath_hw *ah, u_int8_t immunityLevel, BEACON_RSSI(ah), ATH9K_ANI_RSSI_THR_LOW, ATH9K_ANI_RSSI_THR_HIGH); + if (AR_SREV_9100(ah) && immunityLevel < ATH9K_ANI_CCK_DEF_LEVEL) + immunityLevel = ATH9K_ANI_CCK_DEF_LEVEL; + if (ah->opmode == NL80211_IFTYPE_STATION && BEACON_RSSI(ah) <= ATH9K_ANI_RSSI_THR_LOW && immunityLevel > ATH9K_ANI_CCK_MAX_LEVEL_LOW_RSSI) -- cgit v1.2.1 From 62e54dbb599103ff461bb3fe6e32a3066da79754 Mon Sep 17 00:00:00 2001 From: Felix Fietkau Date: Mon, 28 Apr 2014 18:32:12 +0200 Subject: ath9k: remove tid->paused flag There are some corner cases where the driver could get stuck with a full tid queue that is paused, leading to a software tx queue hang. Since the tx queueing rework, pausing per-tid queues on aggregation session setup is no longer necessary. The driver will assign sequence numbers to buffered frames when a new session is established, in order to get the correct starting sequence number. mac80211 prevents new frames from entering the queue during setup. Signed-off-by: Felix Fietkau Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ath9k/ath9k.h | 1 - drivers/net/wireless/ath/ath9k/debug_sta.c | 5 ++--- drivers/net/wireless/ath/ath9k/xmit.c | 14 +------------- 3 files changed, 3 insertions(+), 17 deletions(-) (limited to 'drivers') diff --git a/drivers/net/wireless/ath/ath9k/ath9k.h b/drivers/net/wireless/ath/ath9k/ath9k.h index 44d74495c4de..3ba03dde4215 100644 --- a/drivers/net/wireless/ath/ath9k/ath9k.h +++ b/drivers/net/wireless/ath/ath9k/ath9k.h @@ -251,7 +251,6 @@ struct ath_atx_tid { s8 bar_index; bool sched; - bool paused; bool active; }; diff --git a/drivers/net/wireless/ath/ath9k/debug_sta.c b/drivers/net/wireless/ath/ath9k/debug_sta.c index d76e6e0120d2..ffca918ff16a 100644 --- a/drivers/net/wireless/ath/ath9k/debug_sta.c +++ b/drivers/net/wireless/ath/ath9k/debug_sta.c @@ -72,7 +72,7 @@ static ssize_t read_file_node_aggr(struct file *file, char __user *user_buf, ath_txq_lock(sc, txq); if (tid->active) { len += scnprintf(buf + len, size - len, - "%3d%11d%10d%10d%10d%10d%9d%6d%8d\n", + "%3d%11d%10d%10d%10d%10d%9d%6d\n", tid->tidno, tid->seq_start, tid->seq_next, @@ -80,8 +80,7 @@ static ssize_t read_file_node_aggr(struct file *file, char __user *user_buf, tid->baw_head, tid->baw_tail, tid->bar_index, - tid->sched, - tid->paused); + tid->sched); } ath_txq_unlock(sc, txq); } diff --git a/drivers/net/wireless/ath/ath9k/xmit.c b/drivers/net/wireless/ath/ath9k/xmit.c index 87cbec47fb48..66acb2cbd9df 100644 --- a/drivers/net/wireless/ath/ath9k/xmit.c +++ b/drivers/net/wireless/ath/ath9k/xmit.c @@ -107,9 +107,6 @@ static void ath_tx_queue_tid(struct ath_txq *txq, struct ath_atx_tid *tid) { struct ath_atx_ac *ac = tid->ac; - if (tid->paused) - return; - if (tid->sched) return; @@ -1407,7 +1404,6 @@ int ath_tx_aggr_start(struct ath_softc *sc, struct ieee80211_sta *sta, ath_tx_tid_change_state(sc, txtid); txtid->active = true; - txtid->paused = true; *ssn = txtid->seq_start = txtid->seq_next; txtid->bar_index = -1; @@ -1427,7 +1423,6 @@ void ath_tx_aggr_stop(struct ath_softc *sc, struct ieee80211_sta *sta, u16 tid) ath_txq_lock(sc, txq); txtid->active = false; - txtid->paused = false; ath_tx_flush_tid(sc, txtid); ath_tx_tid_change_state(sc, txtid); ath_txq_unlock_complete(sc, txq); @@ -1487,7 +1482,7 @@ void ath_tx_aggr_wakeup(struct ath_softc *sc, struct ath_node *an) ath_txq_lock(sc, txq); ac->clear_ps_filter = true; - if (!tid->paused && ath_tid_has_buffered(tid)) { + if (ath_tid_has_buffered(tid)) { ath_tx_queue_tid(txq, tid); ath_txq_schedule(sc, txq); } @@ -1510,7 +1505,6 @@ void ath_tx_aggr_resume(struct ath_softc *sc, struct ieee80211_sta *sta, ath_txq_lock(sc, txq); tid->baw_size = IEEE80211_MIN_AMPDU_BUF << sta->ht_cap.ampdu_factor; - tid->paused = false; if (ath_tid_has_buffered(tid)) { ath_tx_queue_tid(txq, tid); @@ -1544,8 +1538,6 @@ void ath9k_release_buffered_frames(struct ieee80211_hw *hw, continue; tid = ATH_AN_2_TID(an, i); - if (tid->paused) - continue; ath_txq_lock(sc, tid->ac->txq); while (nframes > 0) { @@ -1844,9 +1836,6 @@ void ath_txq_schedule(struct ath_softc *sc, struct ath_txq *txq) list_del(&tid->list); tid->sched = false; - if (tid->paused) - continue; - if (ath_tx_sched_aggr(sc, txq, tid, &stop)) sent = true; @@ -2698,7 +2687,6 @@ void ath_tx_node_init(struct ath_softc *sc, struct ath_node *an) tid->baw_size = WME_MAX_BA; tid->baw_head = tid->baw_tail = 0; tid->sched = false; - tid->paused = false; tid->active = false; __skb_queue_head_init(&tid->buf_q); __skb_queue_head_init(&tid->retry_q); -- cgit v1.2.1 From 5f9186990ec4579ee5b7a99b3254c29eda479f36 Mon Sep 17 00:00:00 2001 From: Larry Finger Date: Fri, 25 Apr 2014 10:05:43 -0500 Subject: rtlwifi: rtl8192se: Fix regression due to commit 1bf4bbb Beginning with kernel 3.13, this driver fails on some systems. The problem was bisected to: Commit 1bf4bbb4024dcdab5e57634dd8ae1072d42a53ac Author: Felix Fietkau Title: mac80211: send control port protocol frames to the VO queue There is noting wrong with the above commit. The regression occurs because V0 queue on RTL8192SE cards uses priority 6, not the usual 7. The fix is to modify the rtl8192se routine that sets the correct transmit queue. Bug: https://bugzilla.kernel.org/show_bug.cgi?id=74541 Reported-by: Alex Miller Tested-by: Alex Miller Signed-off-by: Larry Finger Cc: Stable [3.13+] Signed-off-by: John W. Linville --- drivers/net/wireless/rtlwifi/rtl8192se/trx.c | 6 ++++++ 1 file changed, 6 insertions(+) (limited to 'drivers') diff --git a/drivers/net/wireless/rtlwifi/rtl8192se/trx.c b/drivers/net/wireless/rtlwifi/rtl8192se/trx.c index 36b48be8329c..2b3c78baa9f8 100644 --- a/drivers/net/wireless/rtlwifi/rtl8192se/trx.c +++ b/drivers/net/wireless/rtlwifi/rtl8192se/trx.c @@ -49,6 +49,12 @@ static u8 _rtl92se_map_hwqueue_to_fwqueue(struct sk_buff *skb, u8 skb_queue) if (ieee80211_is_nullfunc(fc)) return QSLT_HIGH; + /* Kernel commit 1bf4bbb4024dcdab changed EAPOL packets to use + * queue V0 at priority 7; however, the RTL8192SE appears to have + * that queue at priority 6 + */ + if (skb->priority == 7) + return QSLT_VO; return skb->priority; } -- cgit v1.2.1 From 3234f5b06fc3094176a86772cc64baf3decc98fc Mon Sep 17 00:00:00 2001 From: Ben Hutchings Date: Sat, 26 Apr 2014 21:59:04 +0100 Subject: rtl8192cu: Fix unbalanced irq enable in error path of rtl92cu_hw_init() Fixes: a53268be0cb9 ('rtlwifi: rtl8192cu: Fix too long disable of IRQs') Cc: stable@vger.kernel.org Signed-off-by: Ben Hutchings Signed-off-by: John W. Linville --- drivers/net/wireless/rtlwifi/rtl8192cu/hw.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/wireless/rtlwifi/rtl8192cu/hw.c b/drivers/net/wireless/rtlwifi/rtl8192cu/hw.c index 68b5c7e92cfb..07cb06da6729 100644 --- a/drivers/net/wireless/rtlwifi/rtl8192cu/hw.c +++ b/drivers/net/wireless/rtlwifi/rtl8192cu/hw.c @@ -1001,7 +1001,7 @@ int rtl92cu_hw_init(struct ieee80211_hw *hw) err = _rtl92cu_init_mac(hw); if (err) { RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG, "init mac failed!\n"); - return err; + goto exit; } err = rtl92c_download_fw(hw); if (err) { -- cgit v1.2.1 From 886c7c426d465732ec9d1b2bbdda5642fc2e7e05 Mon Sep 17 00:00:00 2001 From: Jean-Jacques Hiblot Date: Wed, 12 Mar 2014 17:30:08 +0100 Subject: usb: gadget: at91-udc: fix irq and iomem resource retrieval When using dt resources retrieval (interrupts and reg properties) there is no predefined order for these resources in the platform dev resource table. Also don't expect the number of resource to be always 2. Signed-off-by: Jean-Jacques Hiblot Acked-by: Boris BREZILLON Acked-by: Nicolas Ferre Cc: stable # 3.4 Signed-off-by: Felipe Balbi --- drivers/usb/gadget/at91_udc.c | 10 ---------- 1 file changed, 10 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/gadget/at91_udc.c b/drivers/usb/gadget/at91_udc.c index f605ad8c1902..cfd18bcca723 100644 --- a/drivers/usb/gadget/at91_udc.c +++ b/drivers/usb/gadget/at91_udc.c @@ -1709,16 +1709,6 @@ static int at91udc_probe(struct platform_device *pdev) return -ENODEV; } - if (pdev->num_resources != 2) { - DBG("invalid num_resources\n"); - return -ENODEV; - } - if ((pdev->resource[0].flags != IORESOURCE_MEM) - || (pdev->resource[1].flags != IORESOURCE_IRQ)) { - DBG("invalid resource type\n"); - return -ENODEV; - } - res = platform_get_resource(pdev, IORESOURCE_MEM, 0); if (!res) return -ENXIO; -- cgit v1.2.1 From e813d49d2a477e3b64a9ff32ca7db5737d36cd91 Mon Sep 17 00:00:00 2001 From: Alex Elder Date: Mon, 7 Apr 2014 08:22:12 -0500 Subject: clk: bcm281xx: don't use unnamed structs or unions The Broadcom Kona clock code, as originally written, made use of unnamed union and struct fields. This is a feature present in C11, and is a GNU extension otherwise. It worked very well for me. Unfortunately, Russell King reported that this feature was not supported in a build environment he used, which meant attempting to build this code failed spectacularly. Add names to these unnamed fields, and update the code accordingly. Reported-by: Russell King Tested-by: Markus Mayer Signed-off-by: Alex Elder Signed-off-by: Mike Turquette --- drivers/clk/bcm/clk-kona-setup.c | 33 +++++++++++---------- drivers/clk/bcm/clk-kona.c | 64 +++++++++++++++++++++------------------- drivers/clk/bcm/clk-kona.h | 28 +++++++++--------- 3 files changed, 64 insertions(+), 61 deletions(-) (limited to 'drivers') diff --git a/drivers/clk/bcm/clk-kona-setup.c b/drivers/clk/bcm/clk-kona-setup.c index c7607feb18dd..54a06526f64f 100644 --- a/drivers/clk/bcm/clk-kona-setup.c +++ b/drivers/clk/bcm/clk-kona-setup.c @@ -27,7 +27,7 @@ LIST_HEAD(ccu_list); /* The list of set up CCUs */ static bool clk_requires_trigger(struct kona_clk *bcm_clk) { - struct peri_clk_data *peri = bcm_clk->peri; + struct peri_clk_data *peri = bcm_clk->u.peri; struct bcm_clk_sel *sel; struct bcm_clk_div *div; @@ -63,7 +63,7 @@ static bool peri_clk_data_offsets_valid(struct kona_clk *bcm_clk) u32 limit; BUG_ON(bcm_clk->type != bcm_clk_peri); - peri = bcm_clk->peri; + peri = bcm_clk->u.peri; name = bcm_clk->name; range = bcm_clk->ccu->range; @@ -81,19 +81,19 @@ static bool peri_clk_data_offsets_valid(struct kona_clk *bcm_clk) div = &peri->div; if (divider_exists(div)) { - if (div->offset > limit) { + if (div->u.s.offset > limit) { pr_err("%s: bad divider offset for %s (%u > %u)\n", - __func__, name, div->offset, limit); + __func__, name, div->u.s.offset, limit); return false; } } div = &peri->pre_div; if (divider_exists(div)) { - if (div->offset > limit) { + if (div->u.s.offset > limit) { pr_err("%s: bad pre-divider offset for %s " "(%u > %u)\n", - __func__, name, div->offset, limit); + __func__, name, div->u.s.offset, limit); return false; } } @@ -249,21 +249,22 @@ static bool div_valid(struct bcm_clk_div *div, const char *field_name, { if (divider_is_fixed(div)) { /* Any fixed divider value but 0 is OK */ - if (div->fixed == 0) { + if (div->u.fixed == 0) { pr_err("%s: bad %s fixed value 0 for %s\n", __func__, field_name, clock_name); return false; } return true; } - if (!bitfield_valid(div->shift, div->width, field_name, clock_name)) + if (!bitfield_valid(div->u.s.shift, div->u.s.width, + field_name, clock_name)) return false; if (divider_has_fraction(div)) - if (div->frac_width > div->width) { + if (div->u.s.frac_width > div->u.s.width) { pr_warn("%s: bad %s fraction width for %s (%u > %u)\n", __func__, field_name, clock_name, - div->frac_width, div->width); + div->u.s.frac_width, div->u.s.width); return false; } @@ -278,7 +279,7 @@ static bool div_valid(struct bcm_clk_div *div, const char *field_name, */ static bool kona_dividers_valid(struct kona_clk *bcm_clk) { - struct peri_clk_data *peri = bcm_clk->peri; + struct peri_clk_data *peri = bcm_clk->u.peri; struct bcm_clk_div *div; struct bcm_clk_div *pre_div; u32 limit; @@ -295,7 +296,7 @@ static bool kona_dividers_valid(struct kona_clk *bcm_clk) limit = BITS_PER_BYTE * sizeof(u32); - return div->frac_width + pre_div->frac_width <= limit; + return div->u.s.frac_width + pre_div->u.s.frac_width <= limit; } @@ -328,7 +329,7 @@ peri_clk_data_valid(struct kona_clk *bcm_clk) if (!peri_clk_data_offsets_valid(bcm_clk)) return false; - peri = bcm_clk->peri; + peri = bcm_clk->u.peri; name = bcm_clk->name; gate = &peri->gate; if (gate_exists(gate) && !gate_valid(gate, "gate", name)) @@ -588,12 +589,12 @@ static void bcm_clk_teardown(struct kona_clk *bcm_clk) { switch (bcm_clk->type) { case bcm_clk_peri: - peri_clk_teardown(bcm_clk->data, &bcm_clk->init_data); + peri_clk_teardown(bcm_clk->u.data, &bcm_clk->init_data); break; default: break; } - bcm_clk->data = NULL; + bcm_clk->u.data = NULL; bcm_clk->type = bcm_clk_none; } @@ -644,7 +645,7 @@ struct clk *kona_clk_setup(struct ccu_data *ccu, const char *name, break; } bcm_clk->type = type; - bcm_clk->data = data; + bcm_clk->u.data = data; /* Make sure everything makes sense before we set it up */ if (!kona_clk_valid(bcm_clk)) { diff --git a/drivers/clk/bcm/clk-kona.c b/drivers/clk/bcm/clk-kona.c index e3d339e08309..db11a87449f2 100644 --- a/drivers/clk/bcm/clk-kona.c +++ b/drivers/clk/bcm/clk-kona.c @@ -61,7 +61,7 @@ u64 do_div_round_closest(u64 dividend, unsigned long divisor) /* Convert a divider into the scaled divisor value it represents. */ static inline u64 scaled_div_value(struct bcm_clk_div *div, u32 reg_div) { - return (u64)reg_div + ((u64)1 << div->frac_width); + return (u64)reg_div + ((u64)1 << div->u.s.frac_width); } /* @@ -77,7 +77,7 @@ u64 scaled_div_build(struct bcm_clk_div *div, u32 div_value, u32 billionths) BUG_ON(billionths >= BILLION); combined = (u64)div_value * BILLION + billionths; - combined <<= div->frac_width; + combined <<= div->u.s.frac_width; return do_div_round_closest(combined, BILLION); } @@ -87,7 +87,7 @@ static inline u64 scaled_div_min(struct bcm_clk_div *div) { if (divider_is_fixed(div)) - return (u64)div->fixed; + return (u64)div->u.fixed; return scaled_div_value(div, 0); } @@ -98,9 +98,9 @@ u64 scaled_div_max(struct bcm_clk_div *div) u32 reg_div; if (divider_is_fixed(div)) - return (u64)div->fixed; + return (u64)div->u.fixed; - reg_div = ((u32)1 << div->width) - 1; + reg_div = ((u32)1 << div->u.s.width) - 1; return scaled_div_value(div, reg_div); } @@ -115,7 +115,7 @@ divider(struct bcm_clk_div *div, u64 scaled_div) BUG_ON(scaled_div < scaled_div_min(div)); BUG_ON(scaled_div > scaled_div_max(div)); - return (u32)(scaled_div - ((u64)1 << div->frac_width)); + return (u32)(scaled_div - ((u64)1 << div->u.s.frac_width)); } /* Return a rate scaled for use when dividing by a scaled divisor. */ @@ -125,7 +125,7 @@ scale_rate(struct bcm_clk_div *div, u32 rate) if (divider_is_fixed(div)) return (u64)rate; - return (u64)rate << div->frac_width; + return (u64)rate << div->u.s.frac_width; } /* CCU access */ @@ -398,14 +398,14 @@ static u64 divider_read_scaled(struct ccu_data *ccu, struct bcm_clk_div *div) u32 reg_div; if (divider_is_fixed(div)) - return (u64)div->fixed; + return (u64)div->u.fixed; flags = ccu_lock(ccu); - reg_val = __ccu_read(ccu, div->offset); + reg_val = __ccu_read(ccu, div->u.s.offset); ccu_unlock(ccu, flags); /* Extract the full divider field from the register value */ - reg_div = bitfield_extract(reg_val, div->shift, div->width); + reg_div = bitfield_extract(reg_val, div->u.s.shift, div->u.s.width); /* Return the scaled divisor value it represents */ return scaled_div_value(div, reg_div); @@ -433,16 +433,17 @@ static int __div_commit(struct ccu_data *ccu, struct bcm_clk_gate *gate, * state was defined in the device tree, we just find out * what its current value is rather than updating it. */ - if (div->scaled_div == BAD_SCALED_DIV_VALUE) { - reg_val = __ccu_read(ccu, div->offset); - reg_div = bitfield_extract(reg_val, div->shift, div->width); - div->scaled_div = scaled_div_value(div, reg_div); + if (div->u.s.scaled_div == BAD_SCALED_DIV_VALUE) { + reg_val = __ccu_read(ccu, div->u.s.offset); + reg_div = bitfield_extract(reg_val, div->u.s.shift, + div->u.s.width); + div->u.s.scaled_div = scaled_div_value(div, reg_div); return 0; } /* Convert the scaled divisor to the value we need to record */ - reg_div = divider(div, div->scaled_div); + reg_div = divider(div, div->u.s.scaled_div); /* Clock needs to be enabled before changing the rate */ enabled = __is_clk_gate_enabled(ccu, gate); @@ -452,9 +453,10 @@ static int __div_commit(struct ccu_data *ccu, struct bcm_clk_gate *gate, } /* Replace the divider value and record the result */ - reg_val = __ccu_read(ccu, div->offset); - reg_val = bitfield_replace(reg_val, div->shift, div->width, reg_div); - __ccu_write(ccu, div->offset, reg_val); + reg_val = __ccu_read(ccu, div->u.s.offset); + reg_val = bitfield_replace(reg_val, div->u.s.shift, div->u.s.width, + reg_div); + __ccu_write(ccu, div->u.s.offset, reg_val); /* If the trigger fails we still want to disable the gate */ if (!__clk_trigger(ccu, trig)) @@ -490,11 +492,11 @@ static int divider_write(struct ccu_data *ccu, struct bcm_clk_gate *gate, BUG_ON(divider_is_fixed(div)); - previous = div->scaled_div; + previous = div->u.s.scaled_div; if (previous == scaled_div) return 0; /* No change */ - div->scaled_div = scaled_div; + div->u.s.scaled_div = scaled_div; flags = ccu_lock(ccu); __ccu_write_enable(ccu); @@ -505,7 +507,7 @@ static int divider_write(struct ccu_data *ccu, struct bcm_clk_gate *gate, ccu_unlock(ccu, flags); if (ret) - div->scaled_div = previous; /* Revert the change */ + div->u.s.scaled_div = previous; /* Revert the change */ return ret; @@ -802,7 +804,7 @@ static int selector_write(struct ccu_data *ccu, struct bcm_clk_gate *gate, static int kona_peri_clk_enable(struct clk_hw *hw) { struct kona_clk *bcm_clk = to_kona_clk(hw); - struct bcm_clk_gate *gate = &bcm_clk->peri->gate; + struct bcm_clk_gate *gate = &bcm_clk->u.peri->gate; return clk_gate(bcm_clk->ccu, bcm_clk->name, gate, true); } @@ -810,7 +812,7 @@ static int kona_peri_clk_enable(struct clk_hw *hw) static void kona_peri_clk_disable(struct clk_hw *hw) { struct kona_clk *bcm_clk = to_kona_clk(hw); - struct bcm_clk_gate *gate = &bcm_clk->peri->gate; + struct bcm_clk_gate *gate = &bcm_clk->u.peri->gate; (void)clk_gate(bcm_clk->ccu, bcm_clk->name, gate, false); } @@ -818,7 +820,7 @@ static void kona_peri_clk_disable(struct clk_hw *hw) static int kona_peri_clk_is_enabled(struct clk_hw *hw) { struct kona_clk *bcm_clk = to_kona_clk(hw); - struct bcm_clk_gate *gate = &bcm_clk->peri->gate; + struct bcm_clk_gate *gate = &bcm_clk->u.peri->gate; return is_clk_gate_enabled(bcm_clk->ccu, gate) ? 1 : 0; } @@ -827,7 +829,7 @@ static unsigned long kona_peri_clk_recalc_rate(struct clk_hw *hw, unsigned long parent_rate) { struct kona_clk *bcm_clk = to_kona_clk(hw); - struct peri_clk_data *data = bcm_clk->peri; + struct peri_clk_data *data = bcm_clk->u.peri; return clk_recalc_rate(bcm_clk->ccu, &data->div, &data->pre_div, parent_rate); @@ -837,20 +839,20 @@ static long kona_peri_clk_round_rate(struct clk_hw *hw, unsigned long rate, unsigned long *parent_rate) { struct kona_clk *bcm_clk = to_kona_clk(hw); - struct bcm_clk_div *div = &bcm_clk->peri->div; + struct bcm_clk_div *div = &bcm_clk->u.peri->div; if (!divider_exists(div)) return __clk_get_rate(hw->clk); /* Quietly avoid a zero rate */ - return round_rate(bcm_clk->ccu, div, &bcm_clk->peri->pre_div, + return round_rate(bcm_clk->ccu, div, &bcm_clk->u.peri->pre_div, rate ? rate : 1, *parent_rate, NULL); } static int kona_peri_clk_set_parent(struct clk_hw *hw, u8 index) { struct kona_clk *bcm_clk = to_kona_clk(hw); - struct peri_clk_data *data = bcm_clk->peri; + struct peri_clk_data *data = bcm_clk->u.peri; struct bcm_clk_sel *sel = &data->sel; struct bcm_clk_trig *trig; int ret; @@ -884,7 +886,7 @@ static int kona_peri_clk_set_parent(struct clk_hw *hw, u8 index) static u8 kona_peri_clk_get_parent(struct clk_hw *hw) { struct kona_clk *bcm_clk = to_kona_clk(hw); - struct peri_clk_data *data = bcm_clk->peri; + struct peri_clk_data *data = bcm_clk->u.peri; u8 index; index = selector_read_index(bcm_clk->ccu, &data->sel); @@ -897,7 +899,7 @@ static int kona_peri_clk_set_rate(struct clk_hw *hw, unsigned long rate, unsigned long parent_rate) { struct kona_clk *bcm_clk = to_kona_clk(hw); - struct peri_clk_data *data = bcm_clk->peri; + struct peri_clk_data *data = bcm_clk->u.peri; struct bcm_clk_div *div = &data->div; u64 scaled_div = 0; int ret; @@ -958,7 +960,7 @@ struct clk_ops kona_peri_clk_ops = { static bool __peri_clk_init(struct kona_clk *bcm_clk) { struct ccu_data *ccu = bcm_clk->ccu; - struct peri_clk_data *peri = bcm_clk->peri; + struct peri_clk_data *peri = bcm_clk->u.peri; const char *name = bcm_clk->name; struct bcm_clk_trig *trig; diff --git a/drivers/clk/bcm/clk-kona.h b/drivers/clk/bcm/clk-kona.h index 5e139adc3dc5..dee690951bb6 100644 --- a/drivers/clk/bcm/clk-kona.h +++ b/drivers/clk/bcm/clk-kona.h @@ -57,7 +57,7 @@ #define divider_exists(div) FLAG_TEST(div, DIV, EXISTS) #define divider_is_fixed(div) FLAG_TEST(div, DIV, FIXED) #define divider_has_fraction(div) (!divider_is_fixed(div) && \ - (div)->frac_width > 0) + (div)->u.s.frac_width > 0) #define selector_exists(sel) ((sel)->width != 0) #define trigger_exists(trig) FLAG_TEST(trig, TRIG, EXISTS) @@ -244,9 +244,9 @@ struct bcm_clk_div { u32 frac_width; /* field fraction width */ u64 scaled_div; /* scaled divider value */ - }; + } s; u32 fixed; /* non-zero fixed divider value */ - }; + } u; u32 flags; /* BCM_CLK_DIV_FLAGS_* below */ }; @@ -263,28 +263,28 @@ struct bcm_clk_div { /* A fixed (non-zero) divider */ #define FIXED_DIVIDER(_value) \ { \ - .fixed = (_value), \ + .u.fixed = (_value), \ .flags = FLAG(DIV, EXISTS)|FLAG(DIV, FIXED), \ } /* A divider with an integral divisor */ #define DIVIDER(_offset, _shift, _width) \ { \ - .offset = (_offset), \ - .shift = (_shift), \ - .width = (_width), \ - .scaled_div = BAD_SCALED_DIV_VALUE, \ + .u.s.offset = (_offset), \ + .u.s.shift = (_shift), \ + .u.s.width = (_width), \ + .u.s.scaled_div = BAD_SCALED_DIV_VALUE, \ .flags = FLAG(DIV, EXISTS), \ } /* A divider whose divisor has an integer and fractional part */ #define FRAC_DIVIDER(_offset, _shift, _width, _frac_width) \ { \ - .offset = (_offset), \ - .shift = (_shift), \ - .width = (_width), \ - .frac_width = (_frac_width), \ - .scaled_div = BAD_SCALED_DIV_VALUE, \ + .u.s.offset = (_offset), \ + .u.s.shift = (_shift), \ + .u.s.width = (_width), \ + .u.s.frac_width = (_frac_width), \ + .u.s.scaled_div = BAD_SCALED_DIV_VALUE, \ .flags = FLAG(DIV, EXISTS), \ } @@ -380,7 +380,7 @@ struct kona_clk { union { void *data; struct peri_clk_data *peri; - }; + } u; }; #define to_kona_clk(_hw) \ container_of(_hw, struct kona_clk, hw) -- cgit v1.2.1 From dd23c2cd38da2c64af381b19795d2c4f115e8ecb Mon Sep 17 00:00:00 2001 From: Maxime COQUELIN Date: Wed, 29 Jan 2014 17:24:06 +0100 Subject: clk: divider: Fix best div calculation for power-of-two and table dividers The divider returned by clk_divider_bestdiv() is likely to be invalid in case of power-of-two and table dividers when CLK_SET_RATE_PARENT flag isn't set. Fixes boot on STiH416 platform. Signed-off-by: Maxime Coquelin Signed-off-by: Mike Turquette [mturquette@linaro.org: trivial merge conflict & updated changelog] --- drivers/clk/clk-divider.c | 37 ++++++++++++++++++++++++++++++++++++- 1 file changed, 36 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/clk/clk-divider.c b/drivers/clk/clk-divider.c index ec22112e569f..4637697c139f 100644 --- a/drivers/clk/clk-divider.c +++ b/drivers/clk/clk-divider.c @@ -144,6 +144,37 @@ static bool _is_valid_div(struct clk_divider *divider, unsigned int div) return true; } +static int _round_up_table(const struct clk_div_table *table, int div) +{ + const struct clk_div_table *clkt; + int up = _get_table_maxdiv(table); + + for (clkt = table; clkt->div; clkt++) { + if (clkt->div == div) + return clkt->div; + else if (clkt->div < div) + continue; + + if ((clkt->div - div) < (up - div)) + up = clkt->div; + } + + return up; +} + +static int _div_round_up(struct clk_divider *divider, + unsigned long parent_rate, unsigned long rate) +{ + int div = DIV_ROUND_UP(parent_rate, rate); + + if (divider->flags & CLK_DIVIDER_POWER_OF_TWO) + div = __roundup_pow_of_two(div); + if (divider->table) + div = _round_up_table(divider->table, div); + + return div; +} + static int clk_divider_bestdiv(struct clk_hw *hw, unsigned long rate, unsigned long *best_parent_rate) { @@ -159,7 +190,7 @@ static int clk_divider_bestdiv(struct clk_hw *hw, unsigned long rate, if (!(__clk_get_flags(hw->clk) & CLK_SET_RATE_PARENT)) { parent_rate = *best_parent_rate; - bestdiv = DIV_ROUND_UP(parent_rate, rate); + bestdiv = _div_round_up(divider, parent_rate, rate); bestdiv = bestdiv == 0 ? 1 : bestdiv; bestdiv = bestdiv > maxdiv ? maxdiv : bestdiv; return bestdiv; @@ -219,6 +250,10 @@ static int clk_divider_set_rate(struct clk_hw *hw, unsigned long rate, u32 val; div = DIV_ROUND_UP(parent_rate, rate); + + if (!_is_valid_div(divider, div)) + return -EINVAL; + value = _get_val(divider, div); if (value > div_mask(divider)) -- cgit v1.2.1 From a30d27ed739b2c6662f07c76e5deea7bc916bd12 Mon Sep 17 00:00:00 2001 From: Dinh Nguyen Date: Mon, 14 Apr 2014 07:59:32 -0500 Subject: clk: socfpga: fix clock driver for 3.15 commit [1771b10d6 clk: respect the clock dependencies in of_clk_init] exposed a flaw in the socfpga clock driver and prevents the platform from booting on 3.15-rc1. Because the "altr,clk-mgr" is not really a clock, it should not be using CLK_OF_DECLARE, instead we should be mapping the clk-mgr's base address one of the functional clock init function. Use the socfpga_pll_init function to map the clk_mgr_base_addr as this clock should always be initialized first. Signed-off-by: Dinh Nguyen Tested-by: Pavel Machek --- drivers/clk/socfpga/clk-pll.c | 7 +++++++ drivers/clk/socfpga/clk.c | 23 +++-------------------- 2 files changed, 10 insertions(+), 20 deletions(-) (limited to 'drivers') diff --git a/drivers/clk/socfpga/clk-pll.c b/drivers/clk/socfpga/clk-pll.c index 88dafb5e9627..de6da957a09d 100644 --- a/drivers/clk/socfpga/clk-pll.c +++ b/drivers/clk/socfpga/clk-pll.c @@ -20,6 +20,7 @@ #include #include #include +#include #include "clk.h" @@ -43,6 +44,8 @@ #define to_socfpga_clk(p) container_of(p, struct socfpga_pll, hw.hw) +void __iomem *clk_mgr_base_addr; + static unsigned long clk_pll_recalc_rate(struct clk_hw *hwclk, unsigned long parent_rate) { @@ -87,6 +90,7 @@ static __init struct clk *__socfpga_pll_init(struct device_node *node, const char *clk_name = node->name; const char *parent_name[SOCFPGA_MAX_PARENTS]; struct clk_init_data init; + struct device_node *clkmgr_np; int rc; int i = 0; @@ -96,6 +100,9 @@ static __init struct clk *__socfpga_pll_init(struct device_node *node, if (WARN_ON(!pll_clk)) return NULL; + clkmgr_np = of_find_compatible_node(NULL, NULL, "altr,clk-mgr"); + clk_mgr_base_addr = of_iomap(clkmgr_np, 0); + BUG_ON(!clk_mgr_base_addr); pll_clk->hw.reg = clk_mgr_base_addr + reg; of_property_read_string(node, "clock-output-names", &clk_name); diff --git a/drivers/clk/socfpga/clk.c b/drivers/clk/socfpga/clk.c index 35a960a993f9..43db947e5f0e 100644 --- a/drivers/clk/socfpga/clk.c +++ b/drivers/clk/socfpga/clk.c @@ -17,28 +17,11 @@ * You should have received a copy of the GNU General Public License * along with this program. If not, see . */ -#include -#include -#include -#include #include -#include #include "clk.h" -void __iomem *clk_mgr_base_addr; - -static const struct of_device_id socfpga_child_clocks[] __initconst = { - { .compatible = "altr,socfpga-pll-clock", socfpga_pll_init, }, - { .compatible = "altr,socfpga-perip-clk", socfpga_periph_init, }, - { .compatible = "altr,socfpga-gate-clk", socfpga_gate_init, }, - {}, -}; - -static void __init socfpga_clkmgr_init(struct device_node *node) -{ - clk_mgr_base_addr = of_iomap(node, 0); - of_clk_init(socfpga_child_clocks); -} -CLK_OF_DECLARE(socfpga_mgr, "altr,clk-mgr", socfpga_clkmgr_init); +CLK_OF_DECLARE(socfpga_pll_clk, "altr,socfpga-pll-clock", socfpga_pll_init); +CLK_OF_DECLARE(socfpga_perip_clk, "altr,socfpga-perip-clk", socfpga_periph_init); +CLK_OF_DECLARE(socfpga_gate_clk, "altr,socfpga-gate-clk", socfpga_gate_init); -- cgit v1.2.1 From 293ba3b4a4fd54891b900f2911d1a57e1ed4a843 Mon Sep 17 00:00:00 2001 From: Stephen Boyd Date: Fri, 18 Apr 2014 16:29:42 -0700 Subject: clk: Fix double free due to devm_clk_register() Now that clk_unregister() frees the struct clk we're unregistering we'll free memory twice: first we'll call kfree() in __clk_release() with an address kmalloc doesn't know about and second we'll call kfree() in the devres layer. Remove the allocation of struct clk in devm_clk_register() and let clk_release() handle it. This fixes slab errors like: ============================================================================= BUG kmalloc-128 (Not tainted): Invalid object pointer 0xed08e8d0 ----------------------------------------------------------------------------- Disabling lock debugging due to kernel taint INFO: Slab 0xeec503f8 objects=25 used=15 fp=0xed08ea00 flags=0x4081 CPU: 2 PID: 73 Comm: rmmod Tainted: G B 3.14.0-11032-g526e9c764381 #34 [] (unwind_backtrace) from [] (show_stack+0x10/0x14) [] (show_stack) from [] (dump_stack+0x70/0xbc) [] (dump_stack) from [] (slab_err+0x74/0x84) [] (slab_err) from [] (free_debug_processing+0x2cc/0x31c) [] (free_debug_processing) from [] (__slab_free+0x38/0x41c) [] (__slab_free) from [] (clk_unregister+0xd4/0x140) [] (clk_unregister) from [] (release_nodes+0x164/0x1d8) [] (release_nodes) from [] (__device_release_driver+0x60/0xb0) [] (__device_release_driver) from [] (driver_detach+0xb4/0xb8) [] (driver_detach) from [] (bus_remove_driver+0x5c/0xc4) [] (bus_remove_driver) from [] (SyS_delete_module+0x148/0x1d8) [] (SyS_delete_module) from [] (ret_fast_syscall+0x0/0x48) FIX kmalloc-128: Object at 0xed08e8d0 not freed Fixes: fcb0ee6a3d33 (clk: Implement clk_unregister) Cc: Jiada Wang Cc: Sylwester Nawrocki Cc: Kyungmin Park Signed-off-by: Stephen Boyd Signed-off-by: Mike Turquette Cc: stable@vger.kernel.org --- drivers/clk/clk.c | 71 +++++++++++++++++++++++-------------------------------- 1 file changed, 30 insertions(+), 41 deletions(-) (limited to 'drivers') diff --git a/drivers/clk/clk.c b/drivers/clk/clk.c index dff0373f53c1..f71093bf83ab 100644 --- a/drivers/clk/clk.c +++ b/drivers/clk/clk.c @@ -1984,9 +1984,28 @@ struct clk *__clk_register(struct device *dev, struct clk_hw *hw) } EXPORT_SYMBOL_GPL(__clk_register); -static int _clk_register(struct device *dev, struct clk_hw *hw, struct clk *clk) +/** + * clk_register - allocate a new clock, register it and return an opaque cookie + * @dev: device that is registering this clock + * @hw: link to hardware-specific clock data + * + * clk_register is the primary interface for populating the clock tree with new + * clock nodes. It returns a pointer to the newly allocated struct clk which + * cannot be dereferenced by driver code but may be used in conjuction with the + * rest of the clock API. In the event of an error clk_register will return an + * error code; drivers must test for an error code after calling clk_register. + */ +struct clk *clk_register(struct device *dev, struct clk_hw *hw) { int i, ret; + struct clk *clk; + + clk = kzalloc(sizeof(*clk), GFP_KERNEL); + if (!clk) { + pr_err("%s: could not allocate clk\n", __func__); + ret = -ENOMEM; + goto fail_out; + } clk->name = kstrdup(hw->init->name, GFP_KERNEL); if (!clk->name) { @@ -2026,7 +2045,7 @@ static int _clk_register(struct device *dev, struct clk_hw *hw, struct clk *clk) ret = __clk_init(dev, clk); if (!ret) - return 0; + return clk; fail_parent_names_copy: while (--i >= 0) @@ -2035,36 +2054,6 @@ fail_parent_names_copy: fail_parent_names: kfree(clk->name); fail_name: - return ret; -} - -/** - * clk_register - allocate a new clock, register it and return an opaque cookie - * @dev: device that is registering this clock - * @hw: link to hardware-specific clock data - * - * clk_register is the primary interface for populating the clock tree with new - * clock nodes. It returns a pointer to the newly allocated struct clk which - * cannot be dereferenced by driver code but may be used in conjuction with the - * rest of the clock API. In the event of an error clk_register will return an - * error code; drivers must test for an error code after calling clk_register. - */ -struct clk *clk_register(struct device *dev, struct clk_hw *hw) -{ - int ret; - struct clk *clk; - - clk = kzalloc(sizeof(*clk), GFP_KERNEL); - if (!clk) { - pr_err("%s: could not allocate clk\n", __func__); - ret = -ENOMEM; - goto fail_out; - } - - ret = _clk_register(dev, hw, clk); - if (!ret) - return clk; - kfree(clk); fail_out: return ERR_PTR(ret); @@ -2173,7 +2162,7 @@ EXPORT_SYMBOL_GPL(clk_unregister); static void devm_clk_release(struct device *dev, void *res) { - clk_unregister(res); + clk_unregister(*(struct clk **)res); } /** @@ -2188,18 +2177,18 @@ static void devm_clk_release(struct device *dev, void *res) struct clk *devm_clk_register(struct device *dev, struct clk_hw *hw) { struct clk *clk; - int ret; + struct clk **clkp; - clk = devres_alloc(devm_clk_release, sizeof(*clk), GFP_KERNEL); - if (!clk) + clkp = devres_alloc(devm_clk_release, sizeof(*clkp), GFP_KERNEL); + if (!clkp) return ERR_PTR(-ENOMEM); - ret = _clk_register(dev, hw, clk); - if (!ret) { - devres_add(dev, clk); + clk = clk_register(dev, hw); + if (!IS_ERR(clk)) { + *clkp = clk; + devres_add(dev, clkp); } else { - devres_free(clk); - clk = ERR_PTR(ret); + devres_free(clkp); } return clk; -- cgit v1.2.1 From 874f224cc52d64c912087e68e3724be95ad80ee7 Mon Sep 17 00:00:00 2001 From: Stephen Boyd Date: Fri, 18 Apr 2014 16:29:43 -0700 Subject: clk: Fix slab corruption in clk_unregister() When a clock is unregsitered, we iterate over the list of children and reparent them to NULL (i.e. orphan list). While iterating the list, we should use the safe iterators because the children list for this clock is changing when we reparent the children to NULL. Failure to iterate safely can lead to slab corruption like this: ============================================================================= BUG kmalloc-128 (Not tainted): Poison overwritten ----------------------------------------------------------------------------- Disabling lock debugging due to kernel taint INFO: 0xed0c4900-0xed0c4903. First byte 0x0 instead of 0x6b INFO: Allocated in clk_register+0x20/0x1bc age=297 cpu=2 pid=70 __slab_alloc.isra.39.constprop.42+0x410/0x454 kmem_cache_alloc_trace+0x200/0x24c clk_register+0x20/0x1bc devm_clk_register+0x34/0x68 0xbf0000f0 platform_drv_probe+0x18/0x48 driver_probe_device+0x94/0x360 __driver_attach+0x94/0x98 bus_for_each_dev+0x54/0x88 bus_add_driver+0xe8/0x204 driver_register+0x78/0xf4 do_one_initcall+0xc4/0x17c load_module+0x19ac/0x2294 SyS_init_module+0xa4/0x110 ret_fast_syscall+0x0/0x48 INFO: Freed in clk_unregister+0xd4/0x140 age=23 cpu=2 pid=73 __slab_free+0x38/0x41c clk_unregister+0xd4/0x140 release_nodes+0x164/0x1d8 __device_release_driver+0x60/0xb0 driver_detach+0xb4/0xb8 bus_remove_driver+0x5c/0xc4 SyS_delete_module+0x148/0x1d8 ret_fast_syscall+0x0/0x48 INFO: Slab 0xeec50b90 objects=25 used=0 fp=0xed0c5400 flags=0x4080 INFO: Object 0xed0c48c0 @offset=2240 fp=0xed0c4a00 Bytes b4 ed0c48b0: 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a ZZZZZZZZZZZZZZZZ Object ed0c48c0: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b kkkkkkkkkkkkkkkk Object ed0c48d0: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b kkkkkkkkkkkkkkkk Object ed0c48e0: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b kkkkkkkkkkkkkkkk Object ed0c48f0: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b kkkkkkkkkkkkkkkk Object ed0c4900: 00 00 00 00 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b ....kkkkkkkkkkkk Object ed0c4910: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b kkkkkkkkkkkkkkkk Object ed0c4920: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b kkkkkkkkkkkkkkkk Object ed0c4930: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b a5 kkkkkkkkkkkkkkk. Redzone ed0c4940: bb bb bb bb .... Padding ed0c49e8: 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a ZZZZZZZZZZZZZZZZ Padding ed0c49f8: 5a 5a 5a 5a 5a 5a 5a 5a ZZZZZZZZ CPU: 3 PID: 75 Comm: mdev Tainted: G B 3.14.0-11033-g2054ba5ca781 #35 [] (unwind_backtrace) from [] (show_stack+0x10/0x14) [] (show_stack) from [] (dump_stack+0x70/0xbc) [] (dump_stack) from [] (check_bytes_and_report+0xbc/0x100) [] (check_bytes_and_report) from [] (check_object+0x18c/0x218) [] (check_object) from [] (__free_slab+0x104/0x144) [] (__free_slab) from [] (__slab_free+0x3dc/0x41c) [] (__slab_free) from [] (load_elf_binary+0x88/0x12b4) [] (load_elf_binary) from [] (search_binary_handler+0x78/0x18c) [] (search_binary_handler) from [] (do_execve+0x490/0x5dc) [] (do_execve) from [] (____call_usermodehelper+0x134/0x168) [] (____call_usermodehelper) from [] (ret_from_fork+0x14/0x2c) FIX kmalloc-128: Restoring 0xed0c4900-0xed0c4903=0x6b Fixes: fcb0ee6a3d33 (clk: Implement clk_unregister) Cc: Jiada Wang Cc: Sylwester Nawrocki Cc: Kyungmin Park Signed-off-by: Stephen Boyd Signed-off-by: Mike Turquette Cc: stable@vger.kernel.org --- drivers/clk/clk.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/clk/clk.c b/drivers/clk/clk.c index f71093bf83ab..7cf2c093cc54 100644 --- a/drivers/clk/clk.c +++ b/drivers/clk/clk.c @@ -2140,9 +2140,10 @@ void clk_unregister(struct clk *clk) if (!hlist_empty(&clk->children)) { struct clk *child; + struct hlist_node *t; /* Reparent all children to the orphan list. */ - hlist_for_each_entry(child, &clk->children, child_node) + hlist_for_each_entry_safe(child, t, &clk->children, child_node) clk_set_parent(child, NULL); } -- cgit v1.2.1 From 1b4448815ee746f878ca4c6b8fffa23441f6d16c Mon Sep 17 00:00:00 2001 From: Tobias Klauser Date: Mon, 28 Apr 2014 23:23:01 +0200 Subject: Altera TSE: Fix DMA secriptor length initialization sgdma_descrip is a function name as well as the name of a struct. In sgdma_initialize(), we should initialize the descriptor length field with the actual length of a descriptor not with the size of the function. In order to prevent such things from happening in the future, rename the function to sgdma_setup_descrip(). Found by sparse which yields the following warning: drivers/net/ethernet/altera/altera_sgdma.c:74:30: warning: expression using sizeof on a function Signed-off-by: Tobias Klauser Signed-off-by: David S. Miller --- drivers/net/ethernet/altera/altera_sgdma.c | 74 +++++++++++++++--------------- 1 file changed, 37 insertions(+), 37 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/altera/altera_sgdma.c b/drivers/net/ethernet/altera/altera_sgdma.c index 4bcdd34f5d24..9ce8630692b6 100644 --- a/drivers/net/ethernet/altera/altera_sgdma.c +++ b/drivers/net/ethernet/altera/altera_sgdma.c @@ -20,15 +20,15 @@ #include "altera_sgdmahw.h" #include "altera_sgdma.h" -static void sgdma_descrip(struct sgdma_descrip *desc, - struct sgdma_descrip *ndesc, - dma_addr_t ndesc_phys, - dma_addr_t raddr, - dma_addr_t waddr, - u16 length, - int generate_eop, - int rfixed, - int wfixed); +static void sgdma_setup_descrip(struct sgdma_descrip *desc, + struct sgdma_descrip *ndesc, + dma_addr_t ndesc_phys, + dma_addr_t raddr, + dma_addr_t waddr, + u16 length, + int generate_eop, + int rfixed, + int wfixed); static int sgdma_async_write(struct altera_tse_private *priv, struct sgdma_descrip *desc); @@ -71,7 +71,7 @@ int sgdma_initialize(struct altera_tse_private *priv) SGDMA_CTRLREG_INTEN | SGDMA_CTRLREG_ILASTD; - priv->sgdmadesclen = sizeof(sgdma_descrip); + priv->sgdmadesclen = sizeof(struct sgdma_descrip); INIT_LIST_HEAD(&priv->txlisthd); INIT_LIST_HEAD(&priv->rxlisthd); @@ -195,15 +195,15 @@ int sgdma_tx_buffer(struct altera_tse_private *priv, struct tse_buffer *buffer) if (sgdma_txbusy(priv)) return 0; - sgdma_descrip(cdesc, /* current descriptor */ - ndesc, /* next descriptor */ - sgdma_txphysaddr(priv, ndesc), - buffer->dma_addr, /* address of packet to xmit */ - 0, /* write addr 0 for tx dma */ - buffer->len, /* length of packet */ - SGDMA_CONTROL_EOP, /* Generate EOP */ - 0, /* read fixed */ - SGDMA_CONTROL_WR_FIXED); /* Generate SOP */ + sgdma_setup_descrip(cdesc, /* current descriptor */ + ndesc, /* next descriptor */ + sgdma_txphysaddr(priv, ndesc), + buffer->dma_addr, /* address of packet to xmit */ + 0, /* write addr 0 for tx dma */ + buffer->len, /* length of packet */ + SGDMA_CONTROL_EOP, /* Generate EOP */ + 0, /* read fixed */ + SGDMA_CONTROL_WR_FIXED); /* Generate SOP */ pktstx = sgdma_async_write(priv, cdesc); @@ -309,15 +309,15 @@ u32 sgdma_rx_status(struct altera_tse_private *priv) /* Private functions */ -static void sgdma_descrip(struct sgdma_descrip *desc, - struct sgdma_descrip *ndesc, - dma_addr_t ndesc_phys, - dma_addr_t raddr, - dma_addr_t waddr, - u16 length, - int generate_eop, - int rfixed, - int wfixed) +static void sgdma_setup_descrip(struct sgdma_descrip *desc, + struct sgdma_descrip *ndesc, + dma_addr_t ndesc_phys, + dma_addr_t raddr, + dma_addr_t waddr, + u16 length, + int generate_eop, + int rfixed, + int wfixed) { /* Clear the next descriptor as not owned by hardware */ u32 ctrl = ndesc->control; @@ -367,15 +367,15 @@ static int sgdma_async_read(struct altera_tse_private *priv) return 0; } - sgdma_descrip(cdesc, /* current descriptor */ - ndesc, /* next descriptor */ - sgdma_rxphysaddr(priv, ndesc), - 0, /* read addr 0 for rx dma */ - rxbuffer->dma_addr, /* write addr for rx dma */ - 0, /* read 'til EOP */ - 0, /* EOP: NA for rx dma */ - 0, /* read fixed: NA for rx dma */ - 0); /* SOP: NA for rx DMA */ + sgdma_setup_descrip(cdesc, /* current descriptor */ + ndesc, /* next descriptor */ + sgdma_rxphysaddr(priv, ndesc), + 0, /* read addr 0 for rx dma */ + rxbuffer->dma_addr, /* write addr for rx dma */ + 0, /* read 'til EOP */ + 0, /* EOP: NA for rx dma */ + 0, /* read fixed: NA for rx dma */ + 0); /* SOP: NA for rx DMA */ dma_sync_single_for_device(priv->device, priv->rxdescphys, -- cgit v1.2.1 From 652f99ead8319941216c64d7f92c8dcdc9b95970 Mon Sep 17 00:00:00 2001 From: Tobias Klauser Date: Mon, 28 Apr 2014 23:23:13 +0200 Subject: Altera TSE: Add missing include to silence sparse warnings This fixes the following sparse warnings: drivers/net/ethernet/altera/altera_msgdma.c:23:5: warning: symbol 'msgdma_initialize' was not declared. Should it be static? drivers/net/ethernet/altera/altera_msgdma.c:28:6: warning: symbol 'msgdma_uninitialize' was not declared. Should it be static? drivers/net/ethernet/altera/altera_msgdma.c:32:6: warning: symbol 'msgdma_reset' was not declared. Should it be static? drivers/net/ethernet/altera/altera_msgdma.c:77:6: warning: symbol 'msgdma_disable_rxirq' was not declared. Should it be static? drivers/net/ethernet/altera/altera_msgdma.c:83:6: warning: symbol 'msgdma_enable_rxirq' was not declared. Should it be static? drivers/net/ethernet/altera/altera_msgdma.c:89:6: warning: symbol 'msgdma_disable_txirq' was not declared. Should it be static? drivers/net/ethernet/altera/altera_msgdma.c:95:6: warning: symbol 'msgdma_enable_txirq' was not declared. Should it be static? drivers/net/ethernet/altera/altera_msgdma.c:101:6: warning: symbol 'msgdma_clear_rxirq' was not declared. Should it be static? drivers/net/ethernet/altera/altera_msgdma.c:107:6: warning: symbol 'msgdma_clear_txirq' was not declared. Should it be static? drivers/net/ethernet/altera/altera_msgdma.c:114:5: warning: symbol 'msgdma_tx_buffer' was not declared. Should it be static? drivers/net/ethernet/altera/altera_msgdma.c:129:5: warning: symbol 'msgdma_tx_completions' was not declared. Should it be static? drivers/net/ethernet/altera/altera_msgdma.c:154:5: warning: symbol 'msgdma_add_rx_desc' was not declared. Should it be static? drivers/net/ethernet/altera/altera_msgdma.c:181:5: warning: symbol 'msgdma_rx_status' was not declared. Should it be static? Signed-off-by: Tobias Klauser Acked-by: Vince Bridgers Signed-off-by: David S. Miller --- drivers/net/ethernet/altera/altera_msgdma.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/net/ethernet/altera/altera_msgdma.c b/drivers/net/ethernet/altera/altera_msgdma.c index 219a8a1e7ba0..4d1f2fdd5c32 100644 --- a/drivers/net/ethernet/altera/altera_msgdma.c +++ b/drivers/net/ethernet/altera/altera_msgdma.c @@ -18,6 +18,7 @@ #include "altera_utils.h" #include "altera_tse.h" #include "altera_msgdmahw.h" +#include "altera_msgdma.h" /* No initialization work to do for MSGDMA */ int msgdma_initialize(struct altera_tse_private *priv) -- cgit v1.2.1 From d2e752db6d05374a35dddb2e17864fe310fbcf69 Mon Sep 17 00:00:00 2001 From: Roland Dreier Date: Mon, 28 Apr 2014 17:36:20 -0700 Subject: cxgb4: Decode PCIe Gen3 link speed Add handling for " 8 GT/s" in print_port_info(). Signed-off-by: Roland Dreier Signed-off-by: David S. Miller --- drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'drivers') diff --git a/drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c b/drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c index 6fe58913403a..24e16e3301e0 100644 --- a/drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c +++ b/drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c @@ -5870,6 +5870,8 @@ static void print_port_info(const struct net_device *dev) spd = " 2.5 GT/s"; else if (adap->params.pci.speed == PCI_EXP_LNKSTA_CLS_5_0GB) spd = " 5 GT/s"; + else if (adap->params.pci.speed == PCI_EXP_LNKSTA_CLS_8_0GB) + spd = " 8 GT/s"; if (pi->link_cfg.supported & FW_PORT_CAP_SPEED_100M) bufp += sprintf(bufp, "100/"); -- cgit v1.2.1 From 0a0347b1e65d0757024d9db0ffdeafb41a9d14f4 Mon Sep 17 00:00:00 2001 From: Byungho An Date: Tue, 29 Apr 2014 13:15:15 +0900 Subject: net: sxgbe: sw reset moved to probe function This patch moves sw reset to probe function because sw reset is needed early stage before open function. Signed-off-by: Byungho An Signed-off-by: David S. Miller --- drivers/net/ethernet/samsung/sxgbe/sxgbe_dma.c | 13 ------------- drivers/net/ethernet/samsung/sxgbe/sxgbe_main.c | 22 ++++++++++++++++++++++ 2 files changed, 22 insertions(+), 13 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/samsung/sxgbe/sxgbe_dma.c b/drivers/net/ethernet/samsung/sxgbe/sxgbe_dma.c index 4d989ff6c978..bb9b5b8afc5f 100644 --- a/drivers/net/ethernet/samsung/sxgbe/sxgbe_dma.c +++ b/drivers/net/ethernet/samsung/sxgbe/sxgbe_dma.c @@ -23,21 +23,8 @@ /* DMA core initialization */ static int sxgbe_dma_init(void __iomem *ioaddr, int fix_burst, int burst_map) { - int retry_count = 10; u32 reg_val; - /* reset the DMA */ - writel(SXGBE_DMA_SOFT_RESET, ioaddr + SXGBE_DMA_MODE_REG); - while (retry_count--) { - if (!(readl(ioaddr + SXGBE_DMA_MODE_REG) & - SXGBE_DMA_SOFT_RESET)) - break; - mdelay(10); - } - - if (retry_count < 0) - return -EBUSY; - reg_val = readl(ioaddr + SXGBE_DMA_SYSBUS_MODE_REG); /* if fix_burst = 0, Set UNDEF = 1 of DMA_Sys_Mode Register. diff --git a/drivers/net/ethernet/samsung/sxgbe/sxgbe_main.c b/drivers/net/ethernet/samsung/sxgbe/sxgbe_main.c index 27e8c824b204..6ad7b3aaaada 100644 --- a/drivers/net/ethernet/samsung/sxgbe/sxgbe_main.c +++ b/drivers/net/ethernet/samsung/sxgbe/sxgbe_main.c @@ -2070,6 +2070,24 @@ static int sxgbe_hw_init(struct sxgbe_priv_data * const priv) return 0; } +static int sxgbe_sw_reset(void __iomem *addr) +{ + int retry_count = 10; + + writel(SXGBE_DMA_SOFT_RESET, addr + SXGBE_DMA_MODE_REG); + while (retry_count--) { + if (!(readl(addr + SXGBE_DMA_MODE_REG) & + SXGBE_DMA_SOFT_RESET)) + break; + mdelay(10); + } + + if (retry_count < 0) + return -EBUSY; + + return 0; +} + /** * sxgbe_drv_probe * @device: device pointer @@ -2102,6 +2120,10 @@ struct sxgbe_priv_data *sxgbe_drv_probe(struct device *device, priv->plat = plat_dat; priv->ioaddr = addr; + ret = sxgbe_sw_reset(priv->ioaddr); + if (ret) + goto error_free_netdev; + /* Verify driver arguments */ sxgbe_verify_args(); -- cgit v1.2.1 From 325b94f7e63080f3e371e35f063a8be138c1873b Mon Sep 17 00:00:00 2001 From: Byungho An Date: Tue, 29 Apr 2014 13:15:17 +0900 Subject: net: sxgbe: Added rxqueue enable function This patch adds rxqueue enable function according to number of rxqueue and adds rxqueue disable function for removing. Signed-off-by: Byungho An Signed-off-by: David S. Miller --- drivers/net/ethernet/samsung/sxgbe/sxgbe_common.h | 2 ++ drivers/net/ethernet/samsung/sxgbe/sxgbe_core.c | 22 ++++++++++++++++++++++ drivers/net/ethernet/samsung/sxgbe/sxgbe_main.c | 8 ++++++++ drivers/net/ethernet/samsung/sxgbe/sxgbe_reg.h | 4 ++++ 4 files changed, 36 insertions(+) (limited to 'drivers') diff --git a/drivers/net/ethernet/samsung/sxgbe/sxgbe_common.h b/drivers/net/ethernet/samsung/sxgbe/sxgbe_common.h index 6203c7d8550f..45019649bbbd 100644 --- a/drivers/net/ethernet/samsung/sxgbe/sxgbe_common.h +++ b/drivers/net/ethernet/samsung/sxgbe/sxgbe_common.h @@ -358,6 +358,8 @@ struct sxgbe_core_ops { /* Enable disable checksum offload operations */ void (*enable_rx_csum)(void __iomem *ioaddr); void (*disable_rx_csum)(void __iomem *ioaddr); + void (*enable_rxqueue)(void __iomem *ioaddr, int queue_num); + void (*disable_rxqueue)(void __iomem *ioaddr, int queue_num); }; const struct sxgbe_core_ops *sxgbe_get_core_ops(void); diff --git a/drivers/net/ethernet/samsung/sxgbe/sxgbe_core.c b/drivers/net/ethernet/samsung/sxgbe/sxgbe_core.c index c4da7a2b002a..58c35692560e 100644 --- a/drivers/net/ethernet/samsung/sxgbe/sxgbe_core.c +++ b/drivers/net/ethernet/samsung/sxgbe/sxgbe_core.c @@ -165,6 +165,26 @@ static void sxgbe_core_set_speed(void __iomem *ioaddr, unsigned char speed) writel(tx_cfg, ioaddr + SXGBE_CORE_TX_CONFIG_REG); } +static void sxgbe_core_enable_rxqueue(void __iomem *ioaddr, int queue_num) +{ + u32 reg_val; + + reg_val = readl(ioaddr + SXGBE_CORE_RX_CTL0_REG); + reg_val &= ~(SXGBE_CORE_RXQ_ENABLE_MASK << queue_num); + reg_val |= SXGBE_CORE_RXQ_ENABLE; + writel(reg_val, ioaddr + SXGBE_CORE_RX_CTL0_REG); +} + +static void sxgbe_core_disable_rxqueue(void __iomem *ioaddr, int queue_num) +{ + u32 reg_val; + + reg_val = readl(ioaddr + SXGBE_CORE_RX_CTL0_REG); + reg_val &= ~(SXGBE_CORE_RXQ_ENABLE_MASK << queue_num); + reg_val |= SXGBE_CORE_RXQ_DISABLE; + writel(reg_val, ioaddr + SXGBE_CORE_RX_CTL0_REG); +} + static void sxgbe_set_eee_mode(void __iomem *ioaddr) { u32 ctrl; @@ -254,6 +274,8 @@ static const struct sxgbe_core_ops core_ops = { .set_eee_pls = sxgbe_set_eee_pls, .enable_rx_csum = sxgbe_enable_rx_csum, .disable_rx_csum = sxgbe_disable_rx_csum, + .enable_rxqueue = sxgbe_core_enable_rxqueue, + .disable_rxqueue = sxgbe_core_disable_rxqueue, }; const struct sxgbe_core_ops *sxgbe_get_core_ops(void) diff --git a/drivers/net/ethernet/samsung/sxgbe/sxgbe_main.c b/drivers/net/ethernet/samsung/sxgbe/sxgbe_main.c index 6ad7b3aaaada..fd5c428411eb 100644 --- a/drivers/net/ethernet/samsung/sxgbe/sxgbe_main.c +++ b/drivers/net/ethernet/samsung/sxgbe/sxgbe_main.c @@ -1076,6 +1076,9 @@ static int sxgbe_open(struct net_device *dev) /* Initialize the MAC Core */ priv->hw->mac->core_init(priv->ioaddr); + SXGBE_FOR_EACH_QUEUE(SXGBE_RX_QUEUES, queue_num) { + priv->hw->mac->enable_rxqueue(priv->ioaddr, queue_num); + } /* Request the IRQ lines */ ret = devm_request_irq(priv->device, priv->irq, sxgbe_common_interrupt, @@ -2240,9 +2243,14 @@ error_free_netdev: int sxgbe_drv_remove(struct net_device *ndev) { struct sxgbe_priv_data *priv = netdev_priv(ndev); + u8 queue_num; netdev_info(ndev, "%s: removing driver\n", __func__); + SXGBE_FOR_EACH_QUEUE(SXGBE_RX_QUEUES, queue_num) { + priv->hw->mac->disable_rxqueue(priv->ioaddr, queue_num); + } + priv->hw->dma->stop_rx(priv->ioaddr, SXGBE_RX_QUEUES); priv->hw->dma->stop_tx(priv->ioaddr, SXGBE_TX_QUEUES); diff --git a/drivers/net/ethernet/samsung/sxgbe/sxgbe_reg.h b/drivers/net/ethernet/samsung/sxgbe/sxgbe_reg.h index 5a89acb4c505..56f8bf5a3f1b 100644 --- a/drivers/net/ethernet/samsung/sxgbe/sxgbe_reg.h +++ b/drivers/net/ethernet/samsung/sxgbe/sxgbe_reg.h @@ -52,6 +52,10 @@ #define SXGBE_CORE_RX_CTL2_REG 0x00A8 #define SXGBE_CORE_RX_CTL3_REG 0x00AC +#define SXGBE_CORE_RXQ_ENABLE_MASK 0x0003 +#define SXGBE_CORE_RXQ_ENABLE 0x0002 +#define SXGBE_CORE_RXQ_DISABLE 0x0000 + /* Interrupt Registers */ #define SXGBE_CORE_INT_STATUS_REG 0x00B0 #define SXGBE_CORE_INT_ENABLE_REG 0x00B4 -- cgit v1.2.1 From 3dc638d13aced7baad40517a3d70b3b43bf6b90f Mon Sep 17 00:00:00 2001 From: Byungho An Date: Tue, 29 Apr 2014 13:15:27 +0900 Subject: net: sxgbe: Added set function for interrupt on complete This patch adds set_rx_int_on_com function for interrupt when dma is completed. Signed-off-by: Byungho An Signed-off-by: David S. Miller --- drivers/net/ethernet/samsung/sxgbe/sxgbe_desc.c | 7 +++++++ drivers/net/ethernet/samsung/sxgbe/sxgbe_desc.h | 3 +++ drivers/net/ethernet/samsung/sxgbe/sxgbe_main.c | 1 + 3 files changed, 11 insertions(+) (limited to 'drivers') diff --git a/drivers/net/ethernet/samsung/sxgbe/sxgbe_desc.c b/drivers/net/ethernet/samsung/sxgbe/sxgbe_desc.c index d71691be4136..2686bb5b6765 100644 --- a/drivers/net/ethernet/samsung/sxgbe/sxgbe_desc.c +++ b/drivers/net/ethernet/samsung/sxgbe/sxgbe_desc.c @@ -233,6 +233,12 @@ static void sxgbe_set_rx_owner(struct sxgbe_rx_norm_desc *p) p->rdes23.rx_rd_des23.own_bit = 1; } +/* Set Interrupt on completion bit */ +static void sxgbe_set_rx_int_on_com(struct sxgbe_rx_norm_desc *p) +{ + p->rdes23.rx_rd_des23.int_on_com = 1; +} + /* Get the receive frame size */ static int sxgbe_get_rx_frame_len(struct sxgbe_rx_norm_desc *p) { @@ -498,6 +504,7 @@ static const struct sxgbe_desc_ops desc_ops = { .init_rx_desc = sxgbe_init_rx_desc, .get_rx_owner = sxgbe_get_rx_owner, .set_rx_owner = sxgbe_set_rx_owner, + .set_rx_int_on_com = sxgbe_set_rx_int_on_com, .get_rx_frame_len = sxgbe_get_rx_frame_len, .get_rx_fd_status = sxgbe_get_rx_fd_status, .get_rx_ld_status = sxgbe_get_rx_ld_status, diff --git a/drivers/net/ethernet/samsung/sxgbe/sxgbe_desc.h b/drivers/net/ethernet/samsung/sxgbe/sxgbe_desc.h index 022630098aea..18609324db72 100644 --- a/drivers/net/ethernet/samsung/sxgbe/sxgbe_desc.h +++ b/drivers/net/ethernet/samsung/sxgbe/sxgbe_desc.h @@ -258,6 +258,9 @@ struct sxgbe_desc_ops { /* Set own bit */ void (*set_rx_owner)(struct sxgbe_rx_norm_desc *p); + /* Set Interrupt on completion bit */ + void (*set_rx_int_on_com)(struct sxgbe_rx_norm_desc *p); + /* Get the receive frame size */ int (*get_rx_frame_len)(struct sxgbe_rx_norm_desc *p); diff --git a/drivers/net/ethernet/samsung/sxgbe/sxgbe_main.c b/drivers/net/ethernet/samsung/sxgbe/sxgbe_main.c index fd5c428411eb..82a9a983869f 100644 --- a/drivers/net/ethernet/samsung/sxgbe/sxgbe_main.c +++ b/drivers/net/ethernet/samsung/sxgbe/sxgbe_main.c @@ -1456,6 +1456,7 @@ static void sxgbe_rx_refill(struct sxgbe_priv_data *priv) /* Added memory barrier for RX descriptor modification */ wmb(); priv->hw->desc->set_rx_owner(p); + priv->hw->desc->set_rx_int_on_com(p); /* Added memory barrier for RX descriptor modification */ wmb(); } -- cgit v1.2.1 From cbdb04279ccaefcc702c8757757eea8ed76e50cf Mon Sep 17 00:00:00 2001 From: Vlad Yasevich Date: Tue, 29 Apr 2014 10:09:50 -0400 Subject: mactap: Fix checksum errors for non-gso packets in bridge mode The following is a problematic configuration: VM1: virtio-net device connected to macvtap0@eth0 VM2: e1000 device connect to macvtap1@eth0 The problem is is that virtio-net supports checksum offloading and thus sends the packets to the host with CHECKSUM_PARTIAL set. On the other hand, e1000 does not support any acceleration. For small TCP packets (and this includes the 3-way handshake), e1000 ends up receiving packets that only have a partial checksum set. This causes TCP to fail checksum validation and to drop packets. As a result tcp connections can not be established. Commit 3e4f8b787370978733ca6cae452720a4f0c296b8 macvtap: Perform GSO on forwarding path. fixes this issue for large packets wthat will end up undergoing GSO. This commit adds a check for the non-GSO case and attempts to compute the checksum for partially checksummed packets in the non-GSO case. CC: Daniel Lezcano CC: Patrick McHardy CC: Andrian Nord CC: Eric Dumazet CC: Michael S. Tsirkin CC: Jason Wang Signed-off-by: Vlad Yasevich Acked-by: Jason Wang Signed-off-by: David S. Miller --- drivers/net/macvtap.c | 9 +++++++++ 1 file changed, 9 insertions(+) (limited to 'drivers') diff --git a/drivers/net/macvtap.c b/drivers/net/macvtap.c index ff111a89e17f..3381c4f91a8c 100644 --- a/drivers/net/macvtap.c +++ b/drivers/net/macvtap.c @@ -322,6 +322,15 @@ static rx_handler_result_t macvtap_handle_frame(struct sk_buff **pskb) segs = nskb; } } else { + /* If we receive a partial checksum and the tap side + * doesn't support checksum offload, compute the checksum. + * Note: it doesn't matter which checksum feature to + * check, we either support them all or none. + */ + if (skb->ip_summed == CHECKSUM_PARTIAL && + !(features & NETIF_F_ALL_CSUM) && + skb_checksum_help(skb)) + goto drop; skb_queue_tail(&q->sk.sk_receive_queue, skb); } -- cgit v1.2.1 From f114890cdf84d753f6b41cd0cc44ba51d16313da Mon Sep 17 00:00:00 2001 From: Vlad Yasevich Date: Tue, 29 Apr 2014 10:09:51 -0400 Subject: Revert "macvlan : fix checksums error when we are in bridge mode" This reverts commit 12a2856b604476c27d85a5f9a57ae1661fc46019. The commit above doesn't appear to be necessary any more as the checksums appear to be correctly computed/validated. Additionally the above commit breaks kvm configurations where one VM is using a device that support checksum offload (virtio) and the other VM does not. In this case, packets leaving virtio device will have CHECKSUM_PARTIAL set. The packets is forwarded to a macvtap that has offload features turned off. Since we use CHECKSUM_UNNECESSARY, the host does does not update the checksum and thus a bad checksum is passed up to the guest. CC: Daniel Lezcano CC: Patrick McHardy CC: Andrian Nord CC: Eric Dumazet CC: Michael S. Tsirkin CC: Jason Wang Signed-off-by: Vlad Yasevich Acked-by: Michael S. Tsirkin Acked-by: Jason Wang Signed-off-by: David S. Miller --- drivers/net/macvlan.c | 3 --- 1 file changed, 3 deletions(-) (limited to 'drivers') diff --git a/drivers/net/macvlan.c b/drivers/net/macvlan.c index 753a8c23d15d..b0e2865a6810 100644 --- a/drivers/net/macvlan.c +++ b/drivers/net/macvlan.c @@ -263,11 +263,9 @@ static int macvlan_queue_xmit(struct sk_buff *skb, struct net_device *dev) const struct macvlan_dev *vlan = netdev_priv(dev); const struct macvlan_port *port = vlan->port; const struct macvlan_dev *dest; - __u8 ip_summed = skb->ip_summed; if (vlan->mode == MACVLAN_MODE_BRIDGE) { const struct ethhdr *eth = (void *)skb->data; - skb->ip_summed = CHECKSUM_UNNECESSARY; /* send to other bridge ports directly */ if (is_multicast_ether_addr(eth->h_dest)) { @@ -285,7 +283,6 @@ static int macvlan_queue_xmit(struct sk_buff *skb, struct net_device *dev) } xmit_world: - skb->ip_summed = ip_summed; skb->dev = vlan->lowerdev; return dev_queue_xmit(skb); } -- cgit v1.2.1 From 6ce29b0e2a04ea85617cd21099af67449a76f589 Mon Sep 17 00:00:00 2001 From: Claudiu Manoil Date: Wed, 30 Apr 2014 14:27:21 +0300 Subject: gianfar: Avoid unnecessary reg accesses in adjust_link() For phy devices that don't issue interrupts upon link state changes, phylib polls the link state resulting in repeated calls to adjust_link(), even if the link state didn't change. As a result, some mac registers are repeatedly read and written with the same values, which is not ok. To fix this, adjust_link() has been refactored to check first whether the link state has changed and to take action only if needed, updating mac registers and local state variables. The 'new_state' local flag, set if one of the link params changed (link, speed or duplex), has been rendered useless and removed by this refactoring. Signed-off-by: Claudiu Manoil Signed-off-by: David S. Miller --- drivers/net/ethernet/freescale/gianfar.c | 223 ++++++++++++++++--------------- 1 file changed, 113 insertions(+), 110 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/freescale/gianfar.c b/drivers/net/ethernet/freescale/gianfar.c index 9125d9abf099..e2d42475b006 100644 --- a/drivers/net/ethernet/freescale/gianfar.c +++ b/drivers/net/ethernet/freescale/gianfar.c @@ -121,6 +121,7 @@ static irqreturn_t gfar_error(int irq, void *dev_id); static irqreturn_t gfar_transmit(int irq, void *dev_id); static irqreturn_t gfar_interrupt(int irq, void *dev_id); static void adjust_link(struct net_device *dev); +static noinline void gfar_update_link_state(struct gfar_private *priv); static int init_phy(struct net_device *dev); static int gfar_probe(struct platform_device *ofdev); static int gfar_remove(struct platform_device *ofdev); @@ -3076,41 +3077,6 @@ static irqreturn_t gfar_interrupt(int irq, void *grp_id) return IRQ_HANDLED; } -static u32 gfar_get_flowctrl_cfg(struct gfar_private *priv) -{ - struct phy_device *phydev = priv->phydev; - u32 val = 0; - - if (!phydev->duplex) - return val; - - if (!priv->pause_aneg_en) { - if (priv->tx_pause_en) - val |= MACCFG1_TX_FLOW; - if (priv->rx_pause_en) - val |= MACCFG1_RX_FLOW; - } else { - u16 lcl_adv, rmt_adv; - u8 flowctrl; - /* get link partner capabilities */ - rmt_adv = 0; - if (phydev->pause) - rmt_adv = LPA_PAUSE_CAP; - if (phydev->asym_pause) - rmt_adv |= LPA_PAUSE_ASYM; - - lcl_adv = mii_advertise_flowctrl(phydev->advertising); - - flowctrl = mii_resolve_flowctrl_fdx(lcl_adv, rmt_adv); - if (flowctrl & FLOW_CTRL_TX) - val |= MACCFG1_TX_FLOW; - if (flowctrl & FLOW_CTRL_RX) - val |= MACCFG1_RX_FLOW; - } - - return val; -} - /* Called every time the controller might need to be made * aware of new link state. The PHY code conveys this * information through variables in the phydev structure, and this @@ -3120,83 +3086,12 @@ static u32 gfar_get_flowctrl_cfg(struct gfar_private *priv) static void adjust_link(struct net_device *dev) { struct gfar_private *priv = netdev_priv(dev); - struct gfar __iomem *regs = priv->gfargrp[0].regs; struct phy_device *phydev = priv->phydev; - int new_state = 0; - if (test_bit(GFAR_RESETTING, &priv->state)) - return; - - if (phydev->link) { - u32 tempval1 = gfar_read(®s->maccfg1); - u32 tempval = gfar_read(®s->maccfg2); - u32 ecntrl = gfar_read(®s->ecntrl); - - /* Now we make sure that we can be in full duplex mode. - * If not, we operate in half-duplex mode. - */ - if (phydev->duplex != priv->oldduplex) { - new_state = 1; - if (!(phydev->duplex)) - tempval &= ~(MACCFG2_FULL_DUPLEX); - else - tempval |= MACCFG2_FULL_DUPLEX; - - priv->oldduplex = phydev->duplex; - } - - if (phydev->speed != priv->oldspeed) { - new_state = 1; - switch (phydev->speed) { - case 1000: - tempval = - ((tempval & ~(MACCFG2_IF)) | MACCFG2_GMII); - - ecntrl &= ~(ECNTRL_R100); - break; - case 100: - case 10: - tempval = - ((tempval & ~(MACCFG2_IF)) | MACCFG2_MII); - - /* Reduced mode distinguishes - * between 10 and 100 - */ - if (phydev->speed == SPEED_100) - ecntrl |= ECNTRL_R100; - else - ecntrl &= ~(ECNTRL_R100); - break; - default: - netif_warn(priv, link, dev, - "Ack! Speed (%d) is not 10/100/1000!\n", - phydev->speed); - break; - } - - priv->oldspeed = phydev->speed; - } - - tempval1 &= ~(MACCFG1_TX_FLOW | MACCFG1_RX_FLOW); - tempval1 |= gfar_get_flowctrl_cfg(priv); - - gfar_write(®s->maccfg1, tempval1); - gfar_write(®s->maccfg2, tempval); - gfar_write(®s->ecntrl, ecntrl); - - if (!priv->oldlink) { - new_state = 1; - priv->oldlink = 1; - } - } else if (priv->oldlink) { - new_state = 1; - priv->oldlink = 0; - priv->oldspeed = 0; - priv->oldduplex = -1; - } - - if (new_state && netif_msg_link(priv)) - phy_print_status(phydev); + if (unlikely(phydev->link != priv->oldlink || + phydev->duplex != priv->oldduplex || + phydev->speed != priv->oldspeed)) + gfar_update_link_state(priv); } /* Update the hash table based on the current list of multicast @@ -3442,6 +3337,114 @@ static irqreturn_t gfar_error(int irq, void *grp_id) return IRQ_HANDLED; } +static u32 gfar_get_flowctrl_cfg(struct gfar_private *priv) +{ + struct phy_device *phydev = priv->phydev; + u32 val = 0; + + if (!phydev->duplex) + return val; + + if (!priv->pause_aneg_en) { + if (priv->tx_pause_en) + val |= MACCFG1_TX_FLOW; + if (priv->rx_pause_en) + val |= MACCFG1_RX_FLOW; + } else { + u16 lcl_adv, rmt_adv; + u8 flowctrl; + /* get link partner capabilities */ + rmt_adv = 0; + if (phydev->pause) + rmt_adv = LPA_PAUSE_CAP; + if (phydev->asym_pause) + rmt_adv |= LPA_PAUSE_ASYM; + + lcl_adv = mii_advertise_flowctrl(phydev->advertising); + + flowctrl = mii_resolve_flowctrl_fdx(lcl_adv, rmt_adv); + if (flowctrl & FLOW_CTRL_TX) + val |= MACCFG1_TX_FLOW; + if (flowctrl & FLOW_CTRL_RX) + val |= MACCFG1_RX_FLOW; + } + + return val; +} + +static noinline void gfar_update_link_state(struct gfar_private *priv) +{ + struct gfar __iomem *regs = priv->gfargrp[0].regs; + struct phy_device *phydev = priv->phydev; + + if (unlikely(test_bit(GFAR_RESETTING, &priv->state))) + return; + + if (phydev->link) { + u32 tempval1 = gfar_read(®s->maccfg1); + u32 tempval = gfar_read(®s->maccfg2); + u32 ecntrl = gfar_read(®s->ecntrl); + + if (phydev->duplex != priv->oldduplex) { + if (!(phydev->duplex)) + tempval &= ~(MACCFG2_FULL_DUPLEX); + else + tempval |= MACCFG2_FULL_DUPLEX; + + priv->oldduplex = phydev->duplex; + } + + if (phydev->speed != priv->oldspeed) { + switch (phydev->speed) { + case 1000: + tempval = + ((tempval & ~(MACCFG2_IF)) | MACCFG2_GMII); + + ecntrl &= ~(ECNTRL_R100); + break; + case 100: + case 10: + tempval = + ((tempval & ~(MACCFG2_IF)) | MACCFG2_MII); + + /* Reduced mode distinguishes + * between 10 and 100 + */ + if (phydev->speed == SPEED_100) + ecntrl |= ECNTRL_R100; + else + ecntrl &= ~(ECNTRL_R100); + break; + default: + netif_warn(priv, link, priv->ndev, + "Ack! Speed (%d) is not 10/100/1000!\n", + phydev->speed); + break; + } + + priv->oldspeed = phydev->speed; + } + + tempval1 &= ~(MACCFG1_TX_FLOW | MACCFG1_RX_FLOW); + tempval1 |= gfar_get_flowctrl_cfg(priv); + + gfar_write(®s->maccfg1, tempval1); + gfar_write(®s->maccfg2, tempval); + gfar_write(®s->ecntrl, ecntrl); + + if (!priv->oldlink) + priv->oldlink = 1; + + } else if (priv->oldlink) { + priv->oldlink = 0; + priv->oldspeed = 0; + priv->oldduplex = -1; + } + + if (netif_msg_link(priv)) + phy_print_status(phydev); +} + static struct of_device_id gfar_match[] = { { -- cgit v1.2.1 From 22041fb05b66387b2854f789d1e1f55c7d07b4f4 Mon Sep 17 00:00:00 2001 From: KY Srinivasan Date: Wed, 30 Apr 2014 11:58:25 -0700 Subject: hyperv: Properly handle checksum offload Do checksum offload only if the client of the driver wants checksum to be offloaded. In V1 version of this patch, I addressed comments from Stephen Hemminger and Eric Dumazet . In this version of the patch I have addressed comments from David Miller. This patch fixes a bug that is exposed in gateway scenarios. Signed-off-by: K. Y. Srinivasan Reviewed-by: Haiyang Zhang Signed-off-by: David S. Miller --- drivers/net/hyperv/netvsc_drv.c | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'drivers') diff --git a/drivers/net/hyperv/netvsc_drv.c b/drivers/net/hyperv/netvsc_drv.c index 31e55fba7cad..7918d5132c1f 100644 --- a/drivers/net/hyperv/netvsc_drv.c +++ b/drivers/net/hyperv/netvsc_drv.c @@ -382,6 +382,10 @@ static int netvsc_start_xmit(struct sk_buff *skb, struct net_device *net) if (skb_is_gso(skb)) goto do_lso; + if ((skb->ip_summed == CHECKSUM_NONE) || + (skb->ip_summed == CHECKSUM_UNNECESSARY)) + goto do_send; + rndis_msg_size += NDIS_CSUM_PPI_SIZE; ppi = init_ppi_data(rndis_msg, NDIS_CSUM_PPI_SIZE, TCPIP_CHKSUM_PKTINFO); -- cgit v1.2.1 From a8d22396302b7e4e5f0a594c1c1594388c29edaf Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Wed, 30 Apr 2014 22:36:33 +0200 Subject: PNP / ACPI: Do not return errors if _DIS or _SRS are not present The ACPI PNP subsystem returns errors from pnpacpi_set_resources() and pnpacpi_disable_resources() if the _SRS or _DIS methods are not present, respectively, but it should not do that, because those methods are optional. For this reason, modify pnpacpi_set_resources() and pnpacpi_disable_resources(), respectively, to ignore missing _SRS or _DIS. This problem has been uncovered by commit 202317a573b2 (ACPI / scan: Add acpi_device objects for all device nodes in the namespace) and manifested itself by causing serial port suspend to fail on some systems. Fixes: 202317a573b2 (ACPI / scan: Add acpi_device objects for all device nodes in the namespace) References: https://bugzilla.kernel.org/show_bug.cgi?id=74371 Reported-by: wxg4net Reported-and-tested-by: Cc: 3.14+ # 3.14+ Signed-off-by: Rafael J. Wysocki --- drivers/pnp/pnpacpi/core.c | 44 ++++++++++++++++++++++++++------------------ 1 file changed, 26 insertions(+), 18 deletions(-) (limited to 'drivers') diff --git a/drivers/pnp/pnpacpi/core.c b/drivers/pnp/pnpacpi/core.c index 9f611cbbc294..c31aa07b3ba5 100644 --- a/drivers/pnp/pnpacpi/core.c +++ b/drivers/pnp/pnpacpi/core.c @@ -83,8 +83,7 @@ static int pnpacpi_set_resources(struct pnp_dev *dev) { struct acpi_device *acpi_dev; acpi_handle handle; - struct acpi_buffer buffer; - int ret; + int ret = 0; pnp_dbg(&dev->dev, "set resources\n"); @@ -97,19 +96,26 @@ static int pnpacpi_set_resources(struct pnp_dev *dev) if (WARN_ON_ONCE(acpi_dev != dev->data)) dev->data = acpi_dev; - ret = pnpacpi_build_resource_template(dev, &buffer); - if (ret) - return ret; - ret = pnpacpi_encode_resources(dev, &buffer); - if (ret) { + if (acpi_has_method(handle, METHOD_NAME__SRS)) { + struct acpi_buffer buffer; + + ret = pnpacpi_build_resource_template(dev, &buffer); + if (ret) + return ret; + + ret = pnpacpi_encode_resources(dev, &buffer); + if (!ret) { + acpi_status status; + + status = acpi_set_current_resources(handle, &buffer); + if (ACPI_FAILURE(status)) + ret = -EIO; + } kfree(buffer.pointer); - return ret; } - if (ACPI_FAILURE(acpi_set_current_resources(handle, &buffer))) - ret = -EINVAL; - else if (acpi_bus_power_manageable(handle)) + if (!ret && acpi_bus_power_manageable(handle)) ret = acpi_bus_set_power(handle, ACPI_STATE_D0); - kfree(buffer.pointer); + return ret; } @@ -117,7 +123,7 @@ static int pnpacpi_disable_resources(struct pnp_dev *dev) { struct acpi_device *acpi_dev; acpi_handle handle; - int ret; + acpi_status status; dev_dbg(&dev->dev, "disable resources\n"); @@ -128,13 +134,15 @@ static int pnpacpi_disable_resources(struct pnp_dev *dev) } /* acpi_unregister_gsi(pnp_irq(dev, 0)); */ - ret = 0; if (acpi_bus_power_manageable(handle)) acpi_bus_set_power(handle, ACPI_STATE_D3_COLD); - /* continue even if acpi_bus_set_power() fails */ - if (ACPI_FAILURE(acpi_evaluate_object(handle, "_DIS", NULL, NULL))) - ret = -ENODEV; - return ret; + + /* continue even if acpi_bus_set_power() fails */ + status = acpi_evaluate_object(handle, "_DIS", NULL, NULL); + if (ACPI_FAILURE(status) && status != AE_NOT_FOUND) + return -ENODEV; + + return 0; } #ifdef CONFIG_ACPI_SLEEP -- cgit v1.2.1 From 28c015a9daabe4ed3aeb0ccf669a3f1c2b8b81d5 Mon Sep 17 00:00:00 2001 From: Murali Karicheri Date: Thu, 20 Mar 2014 22:08:32 +0200 Subject: mtd: davinci-nand: disable subpage write for keystone-nand Sub page write doesn't work because of hw issue in controller found on Keystone SOCs. AEMIF controller is also used on DaVinci SOCs which don't seems to have any issue. So add "ti,keysone-nand" compatible to nand driver in order to set NAND_NO_SUBPAGE_WRITE option. Cc: Warner Losh Signed-off-by: Murali Karicheri Signed-off-by: Ivan Khoronzhuk Acked-by: Santosh Shilimkar Signed-off-by: Brian Norris --- drivers/mtd/nand/davinci_nand.c | 6 ++++++ 1 file changed, 6 insertions(+) (limited to 'drivers') diff --git a/drivers/mtd/nand/davinci_nand.c b/drivers/mtd/nand/davinci_nand.c index 4615d79fc93f..b922c8efcf40 100644 --- a/drivers/mtd/nand/davinci_nand.c +++ b/drivers/mtd/nand/davinci_nand.c @@ -523,6 +523,7 @@ static struct nand_ecclayout hwecc4_2048 = { #if defined(CONFIG_OF) static const struct of_device_id davinci_nand_of_match[] = { {.compatible = "ti,davinci-nand", }, + {.compatible = "ti,keystone-nand", }, {}, }; MODULE_DEVICE_TABLE(of, davinci_nand_of_match); @@ -581,6 +582,11 @@ static struct davinci_nand_pdata of_property_read_bool(pdev->dev.of_node, "ti,davinci-nand-use-bbt")) pdata->bbt_options = NAND_BBT_USE_FLASH; + + if (of_device_is_compatible(pdev->dev.of_node, + "ti,keystone-nand")) { + pdata->options |= NAND_NO_SUBPAGE_WRITE; + } } return dev_get_platdata(&pdev->dev); -- cgit v1.2.1 From 4985c32ee4241d1aba1beeac72294faa46aaff10 Mon Sep 17 00:00:00 2001 From: Lan Tianyu Date: Wed, 30 Apr 2014 15:46:33 +0800 Subject: ACPI / processor: Fix failure of loading acpi-cpufreq driver According commit d640113fe (ACPI: processor: fix acpi_get_cpuid for UP processor), BIOS may not provide _MAT or MADT tables and acpi_get_apicid() always returns -1. For these cases, original code will pass apic_id with vaule of -1 to acpi_map_cpuid() and it will check the acpi_id. If acpi_id is equal to zero, ignores apic_id and return zero for CPU0. Commit b981513 (ACPI / scan: bail out early if failed to parse APIC ID for CPU) changed the behavior. Return ENODEV when find apic_id is less than zero after calling acpi_get_apicid(). This causes acpi-cpufreq driver fails to be loaded on some machines. This patch is to fix it. Fixes: b981513f806d (ACPI / scan: bail out early if failed to parse APIC ID for CPU) References: https://bugzilla.kernel.org/show_bug.cgi?id=73781 Cc: 3.14+ # 3.14+ Reported-and-tested-by: KATO Hiroshi Reported-and-tested-by: Stuart Foster Signed-off-by: Lan Tianyu Signed-off-by: Rafael J. Wysocki --- drivers/acpi/acpi_processor.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/acpi/acpi_processor.c b/drivers/acpi/acpi_processor.c index c29c2c3ec0ad..b06f5f55ada9 100644 --- a/drivers/acpi/acpi_processor.c +++ b/drivers/acpi/acpi_processor.c @@ -170,6 +170,9 @@ static int acpi_processor_hotadd_init(struct acpi_processor *pr) acpi_status status; int ret; + if (pr->apic_id == -1) + return -ENODEV; + status = acpi_evaluate_integer(pr->handle, "_STA", NULL, &sta); if (ACPI_FAILURE(status) || !(sta & ACPI_STA_DEVICE_PRESENT)) return -ENODEV; @@ -260,10 +263,8 @@ static int acpi_processor_get_info(struct acpi_device *device) } apic_id = acpi_get_apicid(pr->handle, device_declaration, pr->acpi_id); - if (apic_id < 0) { + if (apic_id < 0) acpi_handle_debug(pr->handle, "failed to get CPU APIC ID.\n"); - return -ENODEV; - } pr->apic_id = apic_id; cpu_index = acpi_map_cpuid(pr->apic_id, pr->acpi_id); -- cgit v1.2.1 From e45187620f9fc103edf68fa5ea78e73033e1668c Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Christian=20K=C3=B6nig?= Date: Thu, 10 Apr 2014 16:11:36 +0200 Subject: drm/radeon/uvd: use lower clocks on old UVD to boot v2 MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Some RV7xx generation hardware crashes after you raise the UVD clocks for the first time. Try to avoid this by using the lower clocks to boot these. Workaround for: https://bugzilla.kernel.org/show_bug.cgi?id=71891 v2: lower clocks on IB test as well Signed-off-by: Christian König Reviewed-by: Alex Deucher Cc: stable@vger.kernel.org --- drivers/gpu/drm/radeon/uvd_v1_0.c | 10 ++++++++-- 1 file changed, 8 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/radeon/uvd_v1_0.c b/drivers/gpu/drm/radeon/uvd_v1_0.c index 0a243f0e5d68..be42c8125203 100644 --- a/drivers/gpu/drm/radeon/uvd_v1_0.c +++ b/drivers/gpu/drm/radeon/uvd_v1_0.c @@ -83,7 +83,10 @@ int uvd_v1_0_init(struct radeon_device *rdev) int r; /* raise clocks while booting up the VCPU */ - radeon_set_uvd_clocks(rdev, 53300, 40000); + if (rdev->family < CHIP_RV740) + radeon_set_uvd_clocks(rdev, 10000, 10000); + else + radeon_set_uvd_clocks(rdev, 53300, 40000); r = uvd_v1_0_start(rdev); if (r) @@ -407,7 +410,10 @@ int uvd_v1_0_ib_test(struct radeon_device *rdev, struct radeon_ring *ring) struct radeon_fence *fence = NULL; int r; - r = radeon_set_uvd_clocks(rdev, 53300, 40000); + if (rdev->family < CHIP_RV740) + r = radeon_set_uvd_clocks(rdev, 10000, 10000); + else + r = radeon_set_uvd_clocks(rdev, 53300, 40000); if (r) { DRM_ERROR("radeon: failed to raise UVD clocks (%d).\n", r); return r; -- cgit v1.2.1 From f5d636d2a74b755879feec35e14a259de52ccc07 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Christian=20K=C3=B6nig?= Date: Wed, 23 Apr 2014 20:46:06 +0200 Subject: drm/radeon: use pflip irq on R600+ v2 MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Testing the update pending bit directly after issuing an update is nonsense cause depending on the pixel clock the CRTC needs a bit of time to execute the flip even when we are in the VBLANK period. This is just a non invasive patch to solve the problem at hand, a more complete and cleaner solution should follow in the next merge window. Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=76564 v2: fix source IDs for CRTC2-6 Signed-off-by: Christian König Cc: stable@vger.kernel.org --- drivers/gpu/drm/radeon/cik.c | 76 +++++++++++++++++++++++++++++++++ drivers/gpu/drm/radeon/cikd.h | 9 ++++ drivers/gpu/drm/radeon/evergreen.c | 28 +++++++++--- drivers/gpu/drm/radeon/r600.c | 13 ++++-- drivers/gpu/drm/radeon/radeon.h | 6 +++ drivers/gpu/drm/radeon/radeon_display.c | 4 ++ drivers/gpu/drm/radeon/si.c | 28 +++++++++--- 7 files changed, 147 insertions(+), 17 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/radeon/cik.c b/drivers/gpu/drm/radeon/cik.c index 199eb194716f..421c6084cbfc 100644 --- a/drivers/gpu/drm/radeon/cik.c +++ b/drivers/gpu/drm/radeon/cik.c @@ -6693,6 +6693,19 @@ static void cik_disable_interrupt_state(struct radeon_device *rdev) WREG32(LB_INTERRUPT_MASK + EVERGREEN_CRTC4_REGISTER_OFFSET, 0); WREG32(LB_INTERRUPT_MASK + EVERGREEN_CRTC5_REGISTER_OFFSET, 0); } + /* pflip */ + if (rdev->num_crtc >= 2) { + WREG32(GRPH_INT_CONTROL + EVERGREEN_CRTC0_REGISTER_OFFSET, 0); + WREG32(GRPH_INT_CONTROL + EVERGREEN_CRTC1_REGISTER_OFFSET, 0); + } + if (rdev->num_crtc >= 4) { + WREG32(GRPH_INT_CONTROL + EVERGREEN_CRTC2_REGISTER_OFFSET, 0); + WREG32(GRPH_INT_CONTROL + EVERGREEN_CRTC3_REGISTER_OFFSET, 0); + } + if (rdev->num_crtc >= 6) { + WREG32(GRPH_INT_CONTROL + EVERGREEN_CRTC4_REGISTER_OFFSET, 0); + WREG32(GRPH_INT_CONTROL + EVERGREEN_CRTC5_REGISTER_OFFSET, 0); + } /* dac hotplug */ WREG32(DAC_AUTODETECT_INT_CONTROL, 0); @@ -7049,6 +7062,25 @@ int cik_irq_set(struct radeon_device *rdev) WREG32(LB_INTERRUPT_MASK + EVERGREEN_CRTC5_REGISTER_OFFSET, crtc6); } + if (rdev->num_crtc >= 2) { + WREG32(GRPH_INT_CONTROL + EVERGREEN_CRTC0_REGISTER_OFFSET, + GRPH_PFLIP_INT_MASK); + WREG32(GRPH_INT_CONTROL + EVERGREEN_CRTC1_REGISTER_OFFSET, + GRPH_PFLIP_INT_MASK); + } + if (rdev->num_crtc >= 4) { + WREG32(GRPH_INT_CONTROL + EVERGREEN_CRTC2_REGISTER_OFFSET, + GRPH_PFLIP_INT_MASK); + WREG32(GRPH_INT_CONTROL + EVERGREEN_CRTC3_REGISTER_OFFSET, + GRPH_PFLIP_INT_MASK); + } + if (rdev->num_crtc >= 6) { + WREG32(GRPH_INT_CONTROL + EVERGREEN_CRTC4_REGISTER_OFFSET, + GRPH_PFLIP_INT_MASK); + WREG32(GRPH_INT_CONTROL + EVERGREEN_CRTC5_REGISTER_OFFSET, + GRPH_PFLIP_INT_MASK); + } + WREG32(DC_HPD1_INT_CONTROL, hpd1); WREG32(DC_HPD2_INT_CONTROL, hpd2); WREG32(DC_HPD3_INT_CONTROL, hpd3); @@ -7085,6 +7117,29 @@ static inline void cik_irq_ack(struct radeon_device *rdev) rdev->irq.stat_regs.cik.disp_int_cont5 = RREG32(DISP_INTERRUPT_STATUS_CONTINUE5); rdev->irq.stat_regs.cik.disp_int_cont6 = RREG32(DISP_INTERRUPT_STATUS_CONTINUE6); + rdev->irq.stat_regs.cik.d1grph_int = RREG32(GRPH_INT_STATUS + + EVERGREEN_CRTC0_REGISTER_OFFSET); + rdev->irq.stat_regs.cik.d2grph_int = RREG32(GRPH_INT_STATUS + + EVERGREEN_CRTC1_REGISTER_OFFSET); + if (rdev->num_crtc >= 4) { + rdev->irq.stat_regs.cik.d3grph_int = RREG32(GRPH_INT_STATUS + + EVERGREEN_CRTC2_REGISTER_OFFSET); + rdev->irq.stat_regs.cik.d4grph_int = RREG32(GRPH_INT_STATUS + + EVERGREEN_CRTC3_REGISTER_OFFSET); + } + if (rdev->num_crtc >= 6) { + rdev->irq.stat_regs.cik.d5grph_int = RREG32(GRPH_INT_STATUS + + EVERGREEN_CRTC4_REGISTER_OFFSET); + rdev->irq.stat_regs.cik.d6grph_int = RREG32(GRPH_INT_STATUS + + EVERGREEN_CRTC5_REGISTER_OFFSET); + } + + if (rdev->irq.stat_regs.cik.d1grph_int & GRPH_PFLIP_INT_OCCURRED) + WREG32(GRPH_INT_STATUS + EVERGREEN_CRTC0_REGISTER_OFFSET, + GRPH_PFLIP_INT_CLEAR); + if (rdev->irq.stat_regs.cik.d2grph_int & GRPH_PFLIP_INT_OCCURRED) + WREG32(GRPH_INT_STATUS + EVERGREEN_CRTC1_REGISTER_OFFSET, + GRPH_PFLIP_INT_CLEAR); if (rdev->irq.stat_regs.cik.disp_int & LB_D1_VBLANK_INTERRUPT) WREG32(LB_VBLANK_STATUS + EVERGREEN_CRTC0_REGISTER_OFFSET, VBLANK_ACK); if (rdev->irq.stat_regs.cik.disp_int & LB_D1_VLINE_INTERRUPT) @@ -7095,6 +7150,12 @@ static inline void cik_irq_ack(struct radeon_device *rdev) WREG32(LB_VLINE_STATUS + EVERGREEN_CRTC1_REGISTER_OFFSET, VLINE_ACK); if (rdev->num_crtc >= 4) { + if (rdev->irq.stat_regs.cik.d3grph_int & GRPH_PFLIP_INT_OCCURRED) + WREG32(GRPH_INT_STATUS + EVERGREEN_CRTC2_REGISTER_OFFSET, + GRPH_PFLIP_INT_CLEAR); + if (rdev->irq.stat_regs.cik.d4grph_int & GRPH_PFLIP_INT_OCCURRED) + WREG32(GRPH_INT_STATUS + EVERGREEN_CRTC3_REGISTER_OFFSET, + GRPH_PFLIP_INT_CLEAR); if (rdev->irq.stat_regs.cik.disp_int_cont2 & LB_D3_VBLANK_INTERRUPT) WREG32(LB_VBLANK_STATUS + EVERGREEN_CRTC2_REGISTER_OFFSET, VBLANK_ACK); if (rdev->irq.stat_regs.cik.disp_int_cont2 & LB_D3_VLINE_INTERRUPT) @@ -7106,6 +7167,12 @@ static inline void cik_irq_ack(struct radeon_device *rdev) } if (rdev->num_crtc >= 6) { + if (rdev->irq.stat_regs.cik.d5grph_int & GRPH_PFLIP_INT_OCCURRED) + WREG32(GRPH_INT_STATUS + EVERGREEN_CRTC4_REGISTER_OFFSET, + GRPH_PFLIP_INT_CLEAR); + if (rdev->irq.stat_regs.cik.d6grph_int & GRPH_PFLIP_INT_OCCURRED) + WREG32(GRPH_INT_STATUS + EVERGREEN_CRTC5_REGISTER_OFFSET, + GRPH_PFLIP_INT_CLEAR); if (rdev->irq.stat_regs.cik.disp_int_cont4 & LB_D5_VBLANK_INTERRUPT) WREG32(LB_VBLANK_STATUS + EVERGREEN_CRTC4_REGISTER_OFFSET, VBLANK_ACK); if (rdev->irq.stat_regs.cik.disp_int_cont4 & LB_D5_VLINE_INTERRUPT) @@ -7457,6 +7524,15 @@ restart_ih: break; } break; + case 8: /* D1 page flip */ + case 10: /* D2 page flip */ + case 12: /* D3 page flip */ + case 14: /* D4 page flip */ + case 16: /* D5 page flip */ + case 18: /* D6 page flip */ + DRM_DEBUG("IH: D%d flip\n", ((src_id - 8) >> 1) + 1); + radeon_crtc_handle_flip(rdev, (src_id - 8) >> 1); + break; case 42: /* HPD hotplug */ switch (src_data) { case 0: diff --git a/drivers/gpu/drm/radeon/cikd.h b/drivers/gpu/drm/radeon/cikd.h index 213873270d5f..dd7926394a8f 100644 --- a/drivers/gpu/drm/radeon/cikd.h +++ b/drivers/gpu/drm/radeon/cikd.h @@ -888,6 +888,15 @@ # define DC_HPD6_RX_INTERRUPT (1 << 18) #define DISP_INTERRUPT_STATUS_CONTINUE6 0x6780 +/* 0x6858, 0x7458, 0x10058, 0x10c58, 0x11858, 0x12458 */ +#define GRPH_INT_STATUS 0x6858 +# define GRPH_PFLIP_INT_OCCURRED (1 << 0) +# define GRPH_PFLIP_INT_CLEAR (1 << 8) +/* 0x685c, 0x745c, 0x1005c, 0x10c5c, 0x1185c, 0x1245c */ +#define GRPH_INT_CONTROL 0x685c +# define GRPH_PFLIP_INT_MASK (1 << 0) +# define GRPH_PFLIP_INT_TYPE (1 << 8) + #define DAC_AUTODETECT_INT_CONTROL 0x67c8 #define DC_HPD1_INT_STATUS 0x601c diff --git a/drivers/gpu/drm/radeon/evergreen.c b/drivers/gpu/drm/radeon/evergreen.c index b406546440da..0f7a51a3694f 100644 --- a/drivers/gpu/drm/radeon/evergreen.c +++ b/drivers/gpu/drm/radeon/evergreen.c @@ -4371,7 +4371,6 @@ int evergreen_irq_set(struct radeon_device *rdev) u32 crtc1 = 0, crtc2 = 0, crtc3 = 0, crtc4 = 0, crtc5 = 0, crtc6 = 0; u32 hpd1, hpd2, hpd3, hpd4, hpd5, hpd6; u32 grbm_int_cntl = 0; - u32 grph1 = 0, grph2 = 0, grph3 = 0, grph4 = 0, grph5 = 0, grph6 = 0; u32 afmt1 = 0, afmt2 = 0, afmt3 = 0, afmt4 = 0, afmt5 = 0, afmt6 = 0; u32 dma_cntl, dma_cntl1 = 0; u32 thermal_int = 0; @@ -4554,15 +4553,21 @@ int evergreen_irq_set(struct radeon_device *rdev) WREG32(INT_MASK + EVERGREEN_CRTC5_REGISTER_OFFSET, crtc6); } - WREG32(GRPH_INT_CONTROL + EVERGREEN_CRTC0_REGISTER_OFFSET, grph1); - WREG32(GRPH_INT_CONTROL + EVERGREEN_CRTC1_REGISTER_OFFSET, grph2); + WREG32(GRPH_INT_CONTROL + EVERGREEN_CRTC0_REGISTER_OFFSET, + GRPH_PFLIP_INT_MASK); + WREG32(GRPH_INT_CONTROL + EVERGREEN_CRTC1_REGISTER_OFFSET, + GRPH_PFLIP_INT_MASK); if (rdev->num_crtc >= 4) { - WREG32(GRPH_INT_CONTROL + EVERGREEN_CRTC2_REGISTER_OFFSET, grph3); - WREG32(GRPH_INT_CONTROL + EVERGREEN_CRTC3_REGISTER_OFFSET, grph4); + WREG32(GRPH_INT_CONTROL + EVERGREEN_CRTC2_REGISTER_OFFSET, + GRPH_PFLIP_INT_MASK); + WREG32(GRPH_INT_CONTROL + EVERGREEN_CRTC3_REGISTER_OFFSET, + GRPH_PFLIP_INT_MASK); } if (rdev->num_crtc >= 6) { - WREG32(GRPH_INT_CONTROL + EVERGREEN_CRTC4_REGISTER_OFFSET, grph5); - WREG32(GRPH_INT_CONTROL + EVERGREEN_CRTC5_REGISTER_OFFSET, grph6); + WREG32(GRPH_INT_CONTROL + EVERGREEN_CRTC4_REGISTER_OFFSET, + GRPH_PFLIP_INT_MASK); + WREG32(GRPH_INT_CONTROL + EVERGREEN_CRTC5_REGISTER_OFFSET, + GRPH_PFLIP_INT_MASK); } WREG32(DC_HPD1_INT_CONTROL, hpd1); @@ -4951,6 +4956,15 @@ restart_ih: break; } break; + case 8: /* D1 page flip */ + case 10: /* D2 page flip */ + case 12: /* D3 page flip */ + case 14: /* D4 page flip */ + case 16: /* D5 page flip */ + case 18: /* D6 page flip */ + DRM_DEBUG("IH: D%d flip\n", ((src_id - 8) >> 1) + 1); + radeon_crtc_handle_flip(rdev, (src_id - 8) >> 1); + break; case 42: /* HPD hotplug */ switch (src_data) { case 0: diff --git a/drivers/gpu/drm/radeon/r600.c b/drivers/gpu/drm/radeon/r600.c index 6e887d004eba..6c4699362bca 100644 --- a/drivers/gpu/drm/radeon/r600.c +++ b/drivers/gpu/drm/radeon/r600.c @@ -3505,7 +3505,6 @@ int r600_irq_set(struct radeon_device *rdev) u32 hpd1, hpd2, hpd3, hpd4 = 0, hpd5 = 0, hpd6 = 0; u32 grbm_int_cntl = 0; u32 hdmi0, hdmi1; - u32 d1grph = 0, d2grph = 0; u32 dma_cntl; u32 thermal_int = 0; @@ -3614,8 +3613,8 @@ int r600_irq_set(struct radeon_device *rdev) WREG32(CP_INT_CNTL, cp_int_cntl); WREG32(DMA_CNTL, dma_cntl); WREG32(DxMODE_INT_MASK, mode_int); - WREG32(D1GRPH_INTERRUPT_CONTROL, d1grph); - WREG32(D2GRPH_INTERRUPT_CONTROL, d2grph); + WREG32(D1GRPH_INTERRUPT_CONTROL, DxGRPH_PFLIP_INT_MASK); + WREG32(D2GRPH_INTERRUPT_CONTROL, DxGRPH_PFLIP_INT_MASK); WREG32(GRBM_INT_CNTL, grbm_int_cntl); if (ASIC_IS_DCE3(rdev)) { WREG32(DC_HPD1_INT_CONTROL, hpd1); @@ -3918,6 +3917,14 @@ restart_ih: break; } break; + case 9: /* D1 pflip */ + DRM_DEBUG("IH: D1 flip\n"); + radeon_crtc_handle_flip(rdev, 0); + break; + case 11: /* D2 pflip */ + DRM_DEBUG("IH: D2 flip\n"); + radeon_crtc_handle_flip(rdev, 1); + break; case 19: /* HPD/DAC hotplug */ switch (src_data) { case 0: diff --git a/drivers/gpu/drm/radeon/radeon.h b/drivers/gpu/drm/radeon/radeon.h index b58e1afdda76..68528619834a 100644 --- a/drivers/gpu/drm/radeon/radeon.h +++ b/drivers/gpu/drm/radeon/radeon.h @@ -730,6 +730,12 @@ struct cik_irq_stat_regs { u32 disp_int_cont4; u32 disp_int_cont5; u32 disp_int_cont6; + u32 d1grph_int; + u32 d2grph_int; + u32 d3grph_int; + u32 d4grph_int; + u32 d5grph_int; + u32 d6grph_int; }; union radeon_irq_stat_regs { diff --git a/drivers/gpu/drm/radeon/radeon_display.c b/drivers/gpu/drm/radeon/radeon_display.c index 8d99d5ee8014..14bd701e316c 100644 --- a/drivers/gpu/drm/radeon/radeon_display.c +++ b/drivers/gpu/drm/radeon/radeon_display.c @@ -284,6 +284,10 @@ void radeon_crtc_handle_flip(struct radeon_device *rdev, int crtc_id) u32 update_pending; int vpos, hpos; + /* can happen during initialization */ + if (radeon_crtc == NULL) + return; + spin_lock_irqsave(&rdev->ddev->event_lock, flags); work = radeon_crtc->unpin_work; if (work == NULL || diff --git a/drivers/gpu/drm/radeon/si.c b/drivers/gpu/drm/radeon/si.c index ac708e006180..22a63c98ba14 100644 --- a/drivers/gpu/drm/radeon/si.c +++ b/drivers/gpu/drm/radeon/si.c @@ -5780,7 +5780,6 @@ int si_irq_set(struct radeon_device *rdev) u32 crtc1 = 0, crtc2 = 0, crtc3 = 0, crtc4 = 0, crtc5 = 0, crtc6 = 0; u32 hpd1 = 0, hpd2 = 0, hpd3 = 0, hpd4 = 0, hpd5 = 0, hpd6 = 0; u32 grbm_int_cntl = 0; - u32 grph1 = 0, grph2 = 0, grph3 = 0, grph4 = 0, grph5 = 0, grph6 = 0; u32 dma_cntl, dma_cntl1; u32 thermal_int = 0; @@ -5919,16 +5918,22 @@ int si_irq_set(struct radeon_device *rdev) } if (rdev->num_crtc >= 2) { - WREG32(GRPH_INT_CONTROL + EVERGREEN_CRTC0_REGISTER_OFFSET, grph1); - WREG32(GRPH_INT_CONTROL + EVERGREEN_CRTC1_REGISTER_OFFSET, grph2); + WREG32(GRPH_INT_CONTROL + EVERGREEN_CRTC0_REGISTER_OFFSET, + GRPH_PFLIP_INT_MASK); + WREG32(GRPH_INT_CONTROL + EVERGREEN_CRTC1_REGISTER_OFFSET, + GRPH_PFLIP_INT_MASK); } if (rdev->num_crtc >= 4) { - WREG32(GRPH_INT_CONTROL + EVERGREEN_CRTC2_REGISTER_OFFSET, grph3); - WREG32(GRPH_INT_CONTROL + EVERGREEN_CRTC3_REGISTER_OFFSET, grph4); + WREG32(GRPH_INT_CONTROL + EVERGREEN_CRTC2_REGISTER_OFFSET, + GRPH_PFLIP_INT_MASK); + WREG32(GRPH_INT_CONTROL + EVERGREEN_CRTC3_REGISTER_OFFSET, + GRPH_PFLIP_INT_MASK); } if (rdev->num_crtc >= 6) { - WREG32(GRPH_INT_CONTROL + EVERGREEN_CRTC4_REGISTER_OFFSET, grph5); - WREG32(GRPH_INT_CONTROL + EVERGREEN_CRTC5_REGISTER_OFFSET, grph6); + WREG32(GRPH_INT_CONTROL + EVERGREEN_CRTC4_REGISTER_OFFSET, + GRPH_PFLIP_INT_MASK); + WREG32(GRPH_INT_CONTROL + EVERGREEN_CRTC5_REGISTER_OFFSET, + GRPH_PFLIP_INT_MASK); } if (!ASIC_IS_NODCE(rdev)) { @@ -6292,6 +6297,15 @@ restart_ih: break; } break; + case 8: /* D1 page flip */ + case 10: /* D2 page flip */ + case 12: /* D3 page flip */ + case 14: /* D4 page flip */ + case 16: /* D5 page flip */ + case 18: /* D6 page flip */ + DRM_DEBUG("IH: D%d flip\n", ((src_id - 8) >> 1) + 1); + radeon_crtc_handle_flip(rdev, (src_id - 8) >> 1); + break; case 42: /* HPD hotplug */ switch (src_data) { case 0: -- cgit v1.2.1 From 695daf1a8e731a4b5b89de89a61f32a4d7ad7094 Mon Sep 17 00:00:00 2001 From: Leo Liu Date: Mon, 28 Apr 2014 09:40:22 -0400 Subject: drm/radeon: check buffer relocation offset MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Signed-off-by: Leo Liu Signed-off-by: Christian König Cc: stable@vger.kernel.org --- drivers/gpu/drm/radeon/radeon_uvd.c | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'drivers') diff --git a/drivers/gpu/drm/radeon/radeon_uvd.c b/drivers/gpu/drm/radeon/radeon_uvd.c index 5748bdaeacce..0f96c471c6d8 100644 --- a/drivers/gpu/drm/radeon/radeon_uvd.c +++ b/drivers/gpu/drm/radeon/radeon_uvd.c @@ -465,6 +465,10 @@ static int radeon_uvd_cs_reloc(struct radeon_cs_parser *p, cmd = radeon_get_ib_value(p, p->idx) >> 1; if (cmd < 0x4) { + if (end <= start) { + DRM_ERROR("invalid reloc offset %X!\n", offset); + return -EINVAL; + } if ((end - start) < buf_sizes[cmd]) { DRM_ERROR("buffer (%d) to small (%d / %d)!\n", cmd, (unsigned)(end - start), buf_sizes[cmd]); -- cgit v1.2.1 From 3b333c55485fef0089ae7398906599d000df195e Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Christian=20K=C3=B6nig?= Date: Thu, 24 Apr 2014 18:39:59 +0200 Subject: drm/radeon: avoid high jitter with small frac divs MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Signed-off-by: Christian König --- drivers/gpu/drm/radeon/radeon_display.c | 14 ++++++++++++-- 1 file changed, 12 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/radeon/radeon_display.c b/drivers/gpu/drm/radeon/radeon_display.c index 14bd701e316c..9ff0e2f1be6a 100644 --- a/drivers/gpu/drm/radeon/radeon_display.c +++ b/drivers/gpu/drm/radeon/radeon_display.c @@ -830,14 +830,14 @@ static void avivo_reduce_ratio(unsigned *nom, unsigned *den, /* make sure nominator is large enough */ if (*nom < nom_min) { - tmp = (nom_min + *nom - 1) / *nom; + tmp = DIV_ROUND_UP(nom_min, *nom); *nom *= tmp; *den *= tmp; } /* make sure the denominator is large enough */ if (*den < den_min) { - tmp = (den_min + *den - 1) / *den; + tmp = DIV_ROUND_UP(den_min, *den); *nom *= tmp; *den *= tmp; } @@ -997,6 +997,16 @@ void radeon_compute_pll_avivo(struct radeon_pll *pll, /* this also makes sure that the reference divider is large enough */ avivo_reduce_ratio(&fb_div, &ref_div, fb_div_min, ref_div_min); + /* avoid high jitter with small fractional dividers */ + if (pll->flags & RADEON_PLL_USE_FRAC_FB_DIV && (fb_div % 10)) { + fb_div_min = max(fb_div_min, (9 - (fb_div % 10)) * 20 + 60); + if (fb_div < fb_div_min) { + unsigned tmp = DIV_ROUND_UP(fb_div_min, fb_div); + fb_div *= tmp; + ref_div *= tmp; + } + } + /* and finally save the result */ if (pll->flags & RADEON_PLL_USE_FRAC_FB_DIV) { *fb_div_p = fb_div / 10; -- cgit v1.2.1 From aa019b791a3e138ca0eaa38e72b4ea97d482a7bc Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Wed, 30 Apr 2014 09:27:15 -0400 Subject: drm/radeon/dp: check for errors in dpcd reads MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Check to make sure the transaction succeeded before using the register value. Fixes occasional link training problems. Noticed-by: Sergei Antonov Signed-off-by: Alex Deucher Signed-off-by: Christian König --- drivers/gpu/drm/radeon/atombios_dp.c | 44 ++++++++++++++++++++---------------- 1 file changed, 25 insertions(+), 19 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/radeon/atombios_dp.c b/drivers/gpu/drm/radeon/atombios_dp.c index bc0119fb6c12..54e4f52549af 100644 --- a/drivers/gpu/drm/radeon/atombios_dp.c +++ b/drivers/gpu/drm/radeon/atombios_dp.c @@ -366,11 +366,11 @@ static void radeon_dp_probe_oui(struct radeon_connector *radeon_connector) if (!(dig_connector->dpcd[DP_DOWN_STREAM_PORT_COUNT] & DP_OUI_SUPPORT)) return; - if (drm_dp_dpcd_read(&radeon_connector->ddc_bus->aux, DP_SINK_OUI, buf, 3)) + if (drm_dp_dpcd_read(&radeon_connector->ddc_bus->aux, DP_SINK_OUI, buf, 3) == 3) DRM_DEBUG_KMS("Sink OUI: %02hx%02hx%02hx\n", buf[0], buf[1], buf[2]); - if (drm_dp_dpcd_read(&radeon_connector->ddc_bus->aux, DP_BRANCH_OUI, buf, 3)) + if (drm_dp_dpcd_read(&radeon_connector->ddc_bus->aux, DP_BRANCH_OUI, buf, 3) == 3) DRM_DEBUG_KMS("Branch OUI: %02hx%02hx%02hx\n", buf[0], buf[1], buf[2]); } @@ -419,21 +419,23 @@ int radeon_dp_get_panel_mode(struct drm_encoder *encoder, if (dp_bridge != ENCODER_OBJECT_ID_NONE) { /* DP bridge chips */ - drm_dp_dpcd_readb(&radeon_connector->ddc_bus->aux, - DP_EDP_CONFIGURATION_CAP, &tmp); - if (tmp & 1) - panel_mode = DP_PANEL_MODE_INTERNAL_DP2_MODE; - else if ((dp_bridge == ENCODER_OBJECT_ID_NUTMEG) || - (dp_bridge == ENCODER_OBJECT_ID_TRAVIS)) - panel_mode = DP_PANEL_MODE_INTERNAL_DP1_MODE; - else - panel_mode = DP_PANEL_MODE_EXTERNAL_DP_MODE; + if (drm_dp_dpcd_readb(&radeon_connector->ddc_bus->aux, + DP_EDP_CONFIGURATION_CAP, &tmp) == 1) { + if (tmp & 1) + panel_mode = DP_PANEL_MODE_INTERNAL_DP2_MODE; + else if ((dp_bridge == ENCODER_OBJECT_ID_NUTMEG) || + (dp_bridge == ENCODER_OBJECT_ID_TRAVIS)) + panel_mode = DP_PANEL_MODE_INTERNAL_DP1_MODE; + else + panel_mode = DP_PANEL_MODE_EXTERNAL_DP_MODE; + } } else if (connector->connector_type == DRM_MODE_CONNECTOR_eDP) { /* eDP */ - drm_dp_dpcd_readb(&radeon_connector->ddc_bus->aux, - DP_EDP_CONFIGURATION_CAP, &tmp); - if (tmp & 1) - panel_mode = DP_PANEL_MODE_INTERNAL_DP2_MODE; + if (drm_dp_dpcd_readb(&radeon_connector->ddc_bus->aux, + DP_EDP_CONFIGURATION_CAP, &tmp) == 1) { + if (tmp & 1) + panel_mode = DP_PANEL_MODE_INTERNAL_DP2_MODE; + } } return panel_mode; @@ -809,11 +811,15 @@ void radeon_dp_link_train(struct drm_encoder *encoder, else dp_info.enc_id |= ATOM_DP_CONFIG_LINK_A; - drm_dp_dpcd_readb(&radeon_connector->ddc_bus->aux, DP_MAX_LANE_COUNT, &tmp); - if (ASIC_IS_DCE5(rdev) && (tmp & DP_TPS3_SUPPORTED)) - dp_info.tp3_supported = true; - else + if (drm_dp_dpcd_readb(&radeon_connector->ddc_bus->aux, DP_MAX_LANE_COUNT, &tmp) + == 1) { + if (ASIC_IS_DCE5(rdev) && (tmp & DP_TPS3_SUPPORTED)) + dp_info.tp3_supported = true; + else + dp_info.tp3_supported = false; + } else { dp_info.tp3_supported = false; + } memcpy(dp_info.dpcd, dig_connector->dpcd, DP_RECEIVER_CAP_SIZE); dp_info.rdev = rdev; -- cgit v1.2.1 From c0940e95f7a78be0525c8d31df0b1f71e149e57e Mon Sep 17 00:00:00 2001 From: Guenter Roeck Date: Wed, 30 Apr 2014 14:08:14 -0700 Subject: Revert "hwmon: (coretemp) Refine TjMax detection" This reverts commit 9fb6c9c73b11bef65ba80a362547fd116c1e1c9d. Tjmax on some Intel CPUs is below 85 degrees C. One known example is L5630 with Tjmax of 71 degrees C. There are other Xeon processors with Tjmax of 70 or 80 degrees C. Also, the Intel IA32 System Programming document states that the temperature target is in bits 23:16 of MSR 0x1a2 (MSR_TEMPERATURE_TARGET), which is 8 bits, not 7. So even if turbostat uses similar checks to validate Tjmax, there is no evidence that the checks are actually required. On the contrary, the checks are known to cause problems and therefore need to be removed. This fixes https://bugzilla.kernel.org/show_bug.cgi?id=75071. Fixes: 9fb6c9c hwmon: (coretemp) Refine TjMax detection Reviewed-by: Jean Delvare Cc: stable@vger.kernel.org # 3.14+ Signed-off-by: Guenter Roeck --- drivers/hwmon/coretemp.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/hwmon/coretemp.c b/drivers/hwmon/coretemp.c index 6d02e3b06375..d76f0b70c6e0 100644 --- a/drivers/hwmon/coretemp.c +++ b/drivers/hwmon/coretemp.c @@ -365,12 +365,12 @@ static int get_tjmax(struct cpuinfo_x86 *c, u32 id, struct device *dev) if (cpu_has_tjmax(c)) dev_warn(dev, "Unable to read TjMax from CPU %u\n", id); } else { - val = (eax >> 16) & 0x7f; + val = (eax >> 16) & 0xff; /* * If the TjMax is not plausible, an assumption * will be used */ - if (val >= 85) { + if (val) { dev_dbg(dev, "TjMax is %d degrees C\n", val); return val * 1000; } -- cgit v1.2.1 From e6a623460e5fc960ac3ee9f946d3106233fd28d8 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Salva=20Peir=C3=B3?= Date: Wed, 30 Apr 2014 19:48:02 +0200 Subject: [media] media-device: fix infoleak in ioctl media_enum_entities() MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit This fixes CVE-2014-1739. Signed-off-by: Salva Peiró Acked-by: Laurent Pinchart Cc: stable@vger.kernel.org Signed-off-by: Mauro Carvalho Chehab --- drivers/media/media-device.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/media/media-device.c b/drivers/media/media-device.c index d5a7a135f75d..703560fa5e73 100644 --- a/drivers/media/media-device.c +++ b/drivers/media/media-device.c @@ -93,6 +93,7 @@ static long media_device_enum_entities(struct media_device *mdev, struct media_entity *ent; struct media_entity_desc u_ent; + memset(&u_ent, 0, sizeof(u_ent)); if (copy_from_user(&u_ent.id, &uent->id, sizeof(u_ent.id))) return -EFAULT; -- cgit v1.2.1 From 131cd131a9ff63d4b84f3fe15073a2984ac30066 Mon Sep 17 00:00:00 2001 From: Mike Snitzer Date: Thu, 1 May 2014 16:14:24 -0400 Subject: dm cache: fix writethrough mode quiescing in cache_map Commit 2ee57d58735 ("dm cache: add passthrough mode") inadvertently removed the deferred set reference that was taken in cache_map()'s writethrough mode support. Restore taking this reference. This issue was found with code inspection. Signed-off-by: Mike Snitzer Acked-by: Joe Thornber Cc: stable@vger.kernel.org # 3.13+ --- drivers/md/dm-cache-target.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/md/dm-cache-target.c b/drivers/md/dm-cache-target.c index 1bf4a71919ec..9380be7b1895 100644 --- a/drivers/md/dm-cache-target.c +++ b/drivers/md/dm-cache-target.c @@ -2488,6 +2488,7 @@ static int cache_map(struct dm_target *ti, struct bio *bio) } else { inc_hit_counter(cache, bio); + pb->all_io_entry = dm_deferred_entry_inc(cache->all_io_ds); if (bio_data_dir(bio) == WRITE && writethrough_mode(&cache->features) && !is_dirty(cache, lookup_result.cblock)) -- cgit v1.2.1 From a3d0b1218d351c6e6f3cea36abe22236a08cb246 Mon Sep 17 00:00:00 2001 From: Ilia Mirkin Date: Wed, 26 Mar 2014 19:37:21 -0400 Subject: drm/nouveau/acpi: allow non-optimus setups to load vbios from acpi There appear to be a crop of new hardware where the vbios is not available from PROM/PRAMIN, but there is a valid _ROM method in ACPI. The data read from PCIROM almost invariably contains invalid instructions (still has the x86 opcodes), which makes this a low-risk way to try to obtain a valid vbios image. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=76475 Signed-off-by: Ilia Mirkin Cc: # v2.6.35+ Signed-off-by: Ben Skeggs --- drivers/gpu/drm/nouveau/nouveau_acpi.c | 3 --- 1 file changed, 3 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/nouveau/nouveau_acpi.c b/drivers/gpu/drm/nouveau/nouveau_acpi.c index 83face3f608f..279206997e5c 100644 --- a/drivers/gpu/drm/nouveau/nouveau_acpi.c +++ b/drivers/gpu/drm/nouveau/nouveau_acpi.c @@ -389,9 +389,6 @@ bool nouveau_acpi_rom_supported(struct pci_dev *pdev) acpi_status status; acpi_handle dhandle, rom_handle; - if (!nouveau_dsm_priv.dsm_detected && !nouveau_dsm_priv.optimus_detected) - return false; - dhandle = ACPI_HANDLE(&pdev->dev); if (!dhandle) return false; -- cgit v1.2.1 From ce23b234d157f1dfea098fcc77cb5b6887d10df2 Mon Sep 17 00:00:00 2001 From: Ben Skeggs Date: Mon, 31 Mar 2014 13:25:09 +1000 Subject: drm/nouveau/bios: fix shadowing from PROM on big-endian systems Signed-off-by: Ben Skeggs --- drivers/gpu/drm/nouveau/core/subdev/bios/base.c | 10 ++++++---- 1 file changed, 6 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/nouveau/core/subdev/bios/base.c b/drivers/gpu/drm/nouveau/core/subdev/bios/base.c index e9df94f96d78..3de7d818be76 100644 --- a/drivers/gpu/drm/nouveau/core/subdev/bios/base.c +++ b/drivers/gpu/drm/nouveau/core/subdev/bios/base.c @@ -168,7 +168,8 @@ nouveau_bios_shadow_prom(struct nouveau_bios *bios) */ i = 16; do { - if ((nv_rd32(bios, 0x300000) & 0xffff) == 0xaa55) + u32 data = le32_to_cpu(nv_rd32(bios, 0x300000)) & 0xffff; + if (data == 0xaa55) break; } while (i--); @@ -176,14 +177,15 @@ nouveau_bios_shadow_prom(struct nouveau_bios *bios) goto out; /* read entire bios image to system memory */ - bios->size = ((nv_rd32(bios, 0x300000) >> 16) & 0xff) * 512; + bios->size = (le32_to_cpu(nv_rd32(bios, 0x300000)) >> 16) & 0xff; + bios->size = bios->size * 512; if (!bios->size) goto out; bios->data = kmalloc(bios->size, GFP_KERNEL); if (bios->data) { - for (i = 0; i < bios->size; i+=4) - nv_wo32(bios, i, nv_rd32(bios, 0x300000 + i)); + for (i = 0; i < bios->size; i += 4) + ((u32 *)bios->data)[i/4] = nv_rd32(bios, 0x300000 + i); } /* check the PCI record header */ -- cgit v1.2.1 From 806cbc5026933a781b66adecf6d1658fde9138e6 Mon Sep 17 00:00:00 2001 From: Maarten Lankhorst Date: Thu, 1 May 2014 13:58:05 +0200 Subject: drm/nouveau: fix another lock unbalance in nouveau_crtc_page_flip Fixes a regression introduced by 060810d7abaabca "drm/nouveau: fix locking issues in page flipping paths". chan->cli->mutex is unlocked a second time in the fail_unreserve path, fix this by moving mutex_unlock down. Cc: stable@vger.kernel.org # v3.11+ Signed-off-by: Maarten Lankhorst Signed-off-by: Ben Skeggs --- drivers/gpu/drm/nouveau/nouveau_display.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/nouveau/nouveau_display.c b/drivers/gpu/drm/nouveau/nouveau_display.c index b1547b032150..72e1571393e5 100644 --- a/drivers/gpu/drm/nouveau/nouveau_display.c +++ b/drivers/gpu/drm/nouveau/nouveau_display.c @@ -764,9 +764,9 @@ nouveau_crtc_page_flip(struct drm_crtc *crtc, struct drm_framebuffer *fb, } ret = nouveau_page_flip_emit(chan, old_bo, new_bo, s, &fence); - mutex_unlock(&chan->cli->mutex); if (ret) goto fail_unreserve; + mutex_unlock(&chan->cli->mutex); /* Update the crtc struct and cleanup */ crtc->fb = fb; -- cgit v1.2.1 From c7e74306632c71398ce6db878cd316cb43072ffb Mon Sep 17 00:00:00 2001 From: Ben Skeggs Date: Fri, 2 May 2014 16:21:45 +1000 Subject: drm/gm107/gr: bump attrib cb size quite a bit When initially looking at traces, missed the fact the binary driver was using large pages. Fixes page faults when launching geometry shaders. Signed-off-by: Ben Skeggs --- drivers/gpu/drm/nouveau/core/engine/graph/ctxgm107.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/nouveau/core/engine/graph/ctxgm107.c b/drivers/gpu/drm/nouveau/core/engine/graph/ctxgm107.c index 1dc37b1ddbfa..b0d0fb2f4d08 100644 --- a/drivers/gpu/drm/nouveau/core/engine/graph/ctxgm107.c +++ b/drivers/gpu/drm/nouveau/core/engine/graph/ctxgm107.c @@ -863,7 +863,7 @@ gm107_grctx_generate_mods(struct nvc0_graph_priv *priv, struct nvc0_grctx *info) { mmio_data(0x003000, 0x0100, NV_MEM_ACCESS_RW | NV_MEM_ACCESS_SYS); mmio_data(0x008000, 0x0100, NV_MEM_ACCESS_RW | NV_MEM_ACCESS_SYS); - mmio_data(0x060000, 0x1000, NV_MEM_ACCESS_RW); + mmio_data(0x200000, 0x1000, NV_MEM_ACCESS_RW); mmio_list(0x40800c, 0x00000000, 8, 1); mmio_list(0x408010, 0x80000000, 0, 0); @@ -877,6 +877,8 @@ gm107_grctx_generate_mods(struct nvc0_graph_priv *priv, struct nvc0_grctx *info) mmio_list(0x418e24, 0x00000000, 8, 0); mmio_list(0x418e28, 0x80000030, 0, 0); + mmio_list(0x4064c8, 0x018002c0, 0, 0); + mmio_list(0x418810, 0x80000000, 12, 2); mmio_list(0x419848, 0x10000000, 12, 2); mmio_list(0x419c2c, 0x10000000, 12, 2); -- cgit v1.2.1 From 2de440f59ca9615c92820d165d5e59756e54026b Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Fri, 2 May 2014 06:29:34 +0200 Subject: spi: core: Protect DMA code by #ifdef CONFIG_HAS_DMA If NO_DMA=y: drivers/built-in.o: In function `spi_map_buf': spi.c:(.text+0x21bc60): undefined reference to `dma_map_sg' drivers/built-in.o: In function `spi_unmap_buf.isra.33': spi.c:(.text+0x21c32e): undefined reference to `dma_unmap_sg' make[3]: *** [vmlinux] Error 1 Protect the DMA code by #ifdef CONFIG_HAS_DMA to fix this: - Extract __spi_map_msg() from spi_map_msg(), - Provide dummy definitions of __spi_map_msg() and spi_unmap_msg() if !CONFIG_HAS_DMA. Signed-off-by: Geert Uytterhoeven Signed-off-by: Mark Brown --- drivers/spi/spi.c | 109 ++++++++++++++++++++++++++++++++---------------------- 1 file changed, 65 insertions(+), 44 deletions(-) (limited to 'drivers') diff --git a/drivers/spi/spi.c b/drivers/spi/spi.c index 1534fa1dac34..6046dcd7487e 100644 --- a/drivers/spi/spi.c +++ b/drivers/spi/spi.c @@ -580,6 +580,7 @@ static void spi_set_cs(struct spi_device *spi, bool enable) spi->master->set_cs(spi, !enable); } +#ifdef CONFIG_HAS_DMA static int spi_map_buf(struct spi_master *master, struct device *dev, struct sg_table *sgt, void *buf, size_t len, enum dma_data_direction dir) @@ -637,55 +638,12 @@ static void spi_unmap_buf(struct spi_master *master, struct device *dev, } } -static int spi_map_msg(struct spi_master *master, struct spi_message *msg) +static int __spi_map_msg(struct spi_master *master, struct spi_message *msg) { struct device *tx_dev, *rx_dev; struct spi_transfer *xfer; - void *tmp; - unsigned int max_tx, max_rx; int ret; - if (master->flags & (SPI_MASTER_MUST_RX | SPI_MASTER_MUST_TX)) { - max_tx = 0; - max_rx = 0; - - list_for_each_entry(xfer, &msg->transfers, transfer_list) { - if ((master->flags & SPI_MASTER_MUST_TX) && - !xfer->tx_buf) - max_tx = max(xfer->len, max_tx); - if ((master->flags & SPI_MASTER_MUST_RX) && - !xfer->rx_buf) - max_rx = max(xfer->len, max_rx); - } - - if (max_tx) { - tmp = krealloc(master->dummy_tx, max_tx, - GFP_KERNEL | GFP_DMA); - if (!tmp) - return -ENOMEM; - master->dummy_tx = tmp; - memset(tmp, 0, max_tx); - } - - if (max_rx) { - tmp = krealloc(master->dummy_rx, max_rx, - GFP_KERNEL | GFP_DMA); - if (!tmp) - return -ENOMEM; - master->dummy_rx = tmp; - } - - if (max_tx || max_rx) { - list_for_each_entry(xfer, &msg->transfers, - transfer_list) { - if (!xfer->tx_buf) - xfer->tx_buf = master->dummy_tx; - if (!xfer->rx_buf) - xfer->rx_buf = master->dummy_rx; - } - } - } - if (!master->can_dma) return 0; @@ -742,6 +700,69 @@ static int spi_unmap_msg(struct spi_master *master, struct spi_message *msg) return 0; } +#else /* !CONFIG_HAS_DMA */ +static inline int __spi_map_msg(struct spi_master *master, + struct spi_message *msg) +{ + return 0; +} + +static inline int spi_unmap_msg(struct spi_master *master, + struct spi_message *msg) +{ + return 0; +} +#endif /* !CONFIG_HAS_DMA */ + +static int spi_map_msg(struct spi_master *master, struct spi_message *msg) +{ + struct spi_transfer *xfer; + void *tmp; + unsigned int max_tx, max_rx; + + if (master->flags & (SPI_MASTER_MUST_RX | SPI_MASTER_MUST_TX)) { + max_tx = 0; + max_rx = 0; + + list_for_each_entry(xfer, &msg->transfers, transfer_list) { + if ((master->flags & SPI_MASTER_MUST_TX) && + !xfer->tx_buf) + max_tx = max(xfer->len, max_tx); + if ((master->flags & SPI_MASTER_MUST_RX) && + !xfer->rx_buf) + max_rx = max(xfer->len, max_rx); + } + + if (max_tx) { + tmp = krealloc(master->dummy_tx, max_tx, + GFP_KERNEL | GFP_DMA); + if (!tmp) + return -ENOMEM; + master->dummy_tx = tmp; + memset(tmp, 0, max_tx); + } + + if (max_rx) { + tmp = krealloc(master->dummy_rx, max_rx, + GFP_KERNEL | GFP_DMA); + if (!tmp) + return -ENOMEM; + master->dummy_rx = tmp; + } + + if (max_tx || max_rx) { + list_for_each_entry(xfer, &msg->transfers, + transfer_list) { + if (!xfer->tx_buf) + xfer->tx_buf = master->dummy_tx; + if (!xfer->rx_buf) + xfer->rx_buf = master->dummy_rx; + } + } + } + + return __spi_map_msg(master, msg); +} /* * spi_transfer_one_message - Default implementation of transfer_one_message() -- cgit v1.2.1 From e46e08b843d8ff8c46ad8d7b0b95acaacc4e6195 Mon Sep 17 00:00:00 2001 From: Balakumaran Kannan Date: Thu, 24 Apr 2014 08:22:47 +0530 Subject: net phy: Check for aneg completion before setting state to PHY_RUNNING phy_state_machine should check whether auto-negotiatin is completed before changing phydev->state from PHY_NOLINK to PHY_RUNNING. If auto-negotiation is not completed phydev->state should be set to PHY_AN. Signed-off-by: Balakumaran Kannan Reviewed-by: Florian Fainelli Signed-off-by: David S. Miller --- drivers/net/phy/phy.c | 11 +++++++++++ 1 file changed, 11 insertions(+) (limited to 'drivers') diff --git a/drivers/net/phy/phy.c b/drivers/net/phy/phy.c index 1b6d09aef427..a972056b2249 100644 --- a/drivers/net/phy/phy.c +++ b/drivers/net/phy/phy.c @@ -765,6 +765,17 @@ void phy_state_machine(struct work_struct *work) break; if (phydev->link) { + if (AUTONEG_ENABLE == phydev->autoneg) { + err = phy_aneg_done(phydev); + if (err < 0) + break; + + if (!err) { + phydev->state = PHY_AN; + phydev->link_timeout = PHY_AN_TIMEOUT; + break; + } + } phydev->state = PHY_RUNNING; netif_carrier_on(phydev->attached_dev); phydev->adjust_link(phydev->attached_dev); -- cgit v1.2.1 From 39076b047b160821110cb4deed13424ddfdf8d00 Mon Sep 17 00:00:00 2001 From: Ezequiel Garcia Date: Wed, 30 Apr 2014 13:28:51 -0300 Subject: net: mvmdio: Check for a valid interrupt instead of an error The following commit: commit 9ec36cafe43bf835f8f29273597a5b0cbc8267ef Author: Rob Herring Date: Wed Apr 23 17:57:41 2014 -0500 of/irq: do irq resolution in platform_get_irq changed platform_get_irq() which now returns EINVAL and EPROBE_DEFER, in addition to ENXIO. If there's no interrupt for mvmdio, platform_get_irq() returns EINVAL, but we currently check only for ENXIO. Fix this by looking for a positive integer, which is the proper way of validating a virtual interrupt number. While at it, add a proper handling for the deferral probe case. Signed-off-by: Ezequiel Garcia Reviewed-by: Sebastian Hesselbarth Signed-off-by: David S. Miller --- drivers/net/ethernet/marvell/mvmdio.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/marvell/mvmdio.c b/drivers/net/ethernet/marvell/mvmdio.c index b161a525fc5b..9d5ced263a5e 100644 --- a/drivers/net/ethernet/marvell/mvmdio.c +++ b/drivers/net/ethernet/marvell/mvmdio.c @@ -232,7 +232,7 @@ static int orion_mdio_probe(struct platform_device *pdev) clk_prepare_enable(dev->clk); dev->err_interrupt = platform_get_irq(pdev, 0); - if (dev->err_interrupt != -ENXIO) { + if (dev->err_interrupt > 0) { ret = devm_request_irq(&pdev->dev, dev->err_interrupt, orion_mdio_err_irq, IRQF_SHARED, pdev->name, dev); @@ -241,6 +241,9 @@ static int orion_mdio_probe(struct platform_device *pdev) writel(MVMDIO_ERR_INT_SMI_DONE, dev->regs + MVMDIO_ERR_INT_MASK); + + } else if (dev->err_interrupt == -EPROBE_DEFER) { + return -EPROBE_DEFER; } mutex_init(&dev->lock); -- cgit v1.2.1 From 3d89e141bbf8619f3db97c38e33cb6d7a563614d Mon Sep 17 00:00:00 2001 From: Axel Lin Date: Sat, 3 May 2014 10:57:57 +0800 Subject: spi: qup: Fix return value checking for pm_runtime_get_sync() pm_runtime_get_sync() returns 1 if !CONFIG_PM_RUNTIME. Signed-off-by: Axel Lin Signed-off-by: Mark Brown --- drivers/spi/spi-qup.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/spi/spi-qup.c b/drivers/spi/spi-qup.c index b032e8885e24..78c66e3c53ed 100644 --- a/drivers/spi/spi-qup.c +++ b/drivers/spi/spi-qup.c @@ -734,7 +734,7 @@ static int spi_qup_remove(struct platform_device *pdev) int ret; ret = pm_runtime_get_sync(&pdev->dev); - if (ret) + if (ret < 0) return ret; ret = spi_qup_set_state(controller, QUP_STATE_RESET); -- cgit v1.2.1 From c3676d5ceff213cba35af5ee5f320d2e8dc48cdf Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Thu, 1 May 2014 10:47:52 -0700 Subject: spi: core: Don't destroy master queue if we fail to create it If we fail to create the master queue for some reason we should not attempt to clean it up since attempting to stop a kthread that was not created will hang and it's just generally bad practice. Unfortunately at present we call spi_destroy_queue() even in cases where the creation fails. Fix this by fixing the error handling in spi_master_initialize_queue() so that we only flag the master as queued or destroy the queue if creation succeeded. The change to the flag is done since the general master cleanup uses this to destroy the queue. Reported-by: Ricardo Ribalda Delgado Signed-off-by: Mark Brown Acked-by: Geert Uytterhoeven --- drivers/spi/spi.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/spi/spi.c b/drivers/spi/spi.c index 6046dcd7487e..939edf473235 100644 --- a/drivers/spi/spi.c +++ b/drivers/spi/spi.c @@ -1172,7 +1172,6 @@ static int spi_master_initialize_queue(struct spi_master *master) { int ret; - master->queued = true; master->transfer = spi_queued_transfer; if (!master->transfer_one_message) master->transfer_one_message = spi_transfer_one_message; @@ -1183,6 +1182,7 @@ static int spi_master_initialize_queue(struct spi_master *master) dev_err(&master->dev, "problem initializing queue\n"); goto err_init_queue; } + master->queued = true; ret = spi_start_queue(master); if (ret) { dev_err(&master->dev, "problem starting queue\n"); @@ -1192,8 +1192,8 @@ static int spi_master_initialize_queue(struct spi_master *master) return 0; err_start_queue: -err_init_queue: spi_destroy_queue(master); +err_init_queue: return ret; } -- cgit v1.2.1 From c1db30a2a79eb59997b13b8cabf2a50bea9f04e1 Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Thu, 1 May 2014 15:21:42 -0400 Subject: USB: OHCI: fix problem with global suspend on ATI controllers MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Some OHCI controllers from ATI/AMD seem to have difficulty with "global" USB suspend, that is, suspending an entire USB bus without setting the suspend feature for each port connected to a device. When we try to resume the child devices, the controller gives timeout errors on the unsuspended ports, requiring resets, and can even cause ohci-hcd to hang; see http://marc.info/?l=linux-usb&m=139514332820398&w=2 and the following messages. This patch fixes the problem by adding a new quirk flag to ohci-hcd. The flag causes the ohci_rh_suspend() routine to suspend each unsuspended, enabled port before suspending the root hub. This effectively converts the "global" suspend to an ordinary root-hub suspend. There is no need to unsuspend these ports when the root hub is resumed, because the child devices will be resumed anyway in the course of a normal system resume ("global" suspend is never used for runtime PM). This patch should be applied to all stable kernels which include commit 0aa2832dd0d9 (USB: use "global suspend" for system sleep on USB-2 buses) or a backported version thereof. Signed-off-by: Alan Stern Reported-by: Peter Münster Tested-by: Peter Münster CC: Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/ohci-hub.c | 18 ++++++++++++++++++ drivers/usb/host/ohci-pci.c | 1 + drivers/usb/host/ohci.h | 2 ++ 3 files changed, 21 insertions(+) (limited to 'drivers') diff --git a/drivers/usb/host/ohci-hub.c b/drivers/usb/host/ohci-hub.c index c81c8721cc5a..cd871b895013 100644 --- a/drivers/usb/host/ohci-hub.c +++ b/drivers/usb/host/ohci-hub.c @@ -90,6 +90,24 @@ __acquires(ohci->lock) dl_done_list (ohci); finish_unlinks (ohci, ohci_frame_no(ohci)); + /* + * Some controllers don't handle "global" suspend properly if + * there are unsuspended ports. For these controllers, put all + * the enabled ports into suspend before suspending the root hub. + */ + if (ohci->flags & OHCI_QUIRK_GLOBAL_SUSPEND) { + __hc32 __iomem *portstat = ohci->regs->roothub.portstatus; + int i; + unsigned temp; + + for (i = 0; i < ohci->num_ports; (++i, ++portstat)) { + temp = ohci_readl(ohci, portstat); + if ((temp & (RH_PS_PES | RH_PS_PSS)) == + RH_PS_PES) + ohci_writel(ohci, RH_PS_PSS, portstat); + } + } + /* maybe resume can wake root hub */ if (ohci_to_hcd(ohci)->self.root_hub->do_remote_wakeup || autostop) { ohci->hc_control |= OHCI_CTRL_RWE; diff --git a/drivers/usb/host/ohci-pci.c b/drivers/usb/host/ohci-pci.c index 90879e9ccbec..bb1509675727 100644 --- a/drivers/usb/host/ohci-pci.c +++ b/drivers/usb/host/ohci-pci.c @@ -160,6 +160,7 @@ static int ohci_quirk_amd700(struct usb_hcd *hcd) ohci_dbg(ohci, "enabled AMD prefetch quirk\n"); } + ohci->flags |= OHCI_QUIRK_GLOBAL_SUSPEND; return 0; } diff --git a/drivers/usb/host/ohci.h b/drivers/usb/host/ohci.h index 9250cada13f0..4550ce05af7f 100644 --- a/drivers/usb/host/ohci.h +++ b/drivers/usb/host/ohci.h @@ -405,6 +405,8 @@ struct ohci_hcd { #define OHCI_QUIRK_HUB_POWER 0x100 /* distrust firmware power/oc setup */ #define OHCI_QUIRK_AMD_PLL 0x200 /* AMD PLL quirk*/ #define OHCI_QUIRK_AMD_PREFETCH 0x400 /* pre-fetch for ISO transfer */ +#define OHCI_QUIRK_GLOBAL_SUSPEND 0x800 /* must suspend ports */ + // there are also chip quirks/bugs in init logic struct work_struct nec_work; /* Worker for NEC quirk */ -- cgit v1.2.1 From 4d7c0136a54f62501f8a34c4d08a5e0258d3d3ca Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Bj=C3=B8rn=20Mork?= Date: Sun, 27 Apr 2014 16:47:42 +0200 Subject: usb: qcserial: add a number of Dell devices MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Dan writes: "The Dell drivers use the same configuration for PIDs: 81A2: Dell Wireless 5806 Gobi(TM) 4G LTE Mobile Broadband Card 81A3: Dell Wireless 5570 HSPA+ (42Mbps) Mobile Broadband Card 81A4: Dell Wireless 5570e HSPA+ (42Mbps) Mobile Broadband Card 81A8: Dell Wireless 5808 Gobi(TM) 4G LTE Mobile Broadband Card 81A9: Dell Wireless 5808e Gobi(TM) 4G LTE Mobile Broadband Card These devices are all clearly Sierra devices, but are also definitely Gobi-based. The A8 might be the MC7700/7710 and A9 is likely a MC7750. >From DellGobi5kSetup.exe from the Dell drivers: usbif0: serial/firmware loader? usbif2: nmea usbif3: modem/ppp usbif8: net/QMI" Cc: Reported-by: AceLan Kao Reported-by: Dan Williams Signed-off-by: Bjørn Mork Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/qcserial.c | 15 +++++++++++++++ 1 file changed, 15 insertions(+) (limited to 'drivers') diff --git a/drivers/usb/serial/qcserial.c b/drivers/usb/serial/qcserial.c index 7ed681a714a5..6c0a542e8ec1 100644 --- a/drivers/usb/serial/qcserial.c +++ b/drivers/usb/serial/qcserial.c @@ -151,6 +151,21 @@ static const struct usb_device_id id_table[] = { {USB_DEVICE_INTERFACE_NUMBER(0x1199, 0x9051, 0)}, /* Netgear AirCard 340U Device Management */ {USB_DEVICE_INTERFACE_NUMBER(0x1199, 0x9051, 2)}, /* Netgear AirCard 340U NMEA */ {USB_DEVICE_INTERFACE_NUMBER(0x1199, 0x9051, 3)}, /* Netgear AirCard 340U Modem */ + {USB_DEVICE_INTERFACE_NUMBER(0x413c, 0x81a2, 0)}, /* Dell Wireless 5806 Gobi(TM) 4G LTE Mobile Broadband Card Device Management */ + {USB_DEVICE_INTERFACE_NUMBER(0x413c, 0x81a2, 2)}, /* Dell Wireless 5806 Gobi(TM) 4G LTE Mobile Broadband Card NMEA */ + {USB_DEVICE_INTERFACE_NUMBER(0x413c, 0x81a2, 3)}, /* Dell Wireless 5806 Gobi(TM) 4G LTE Mobile Broadband Card Modem */ + {USB_DEVICE_INTERFACE_NUMBER(0x413c, 0x81a3, 0)}, /* Dell Wireless 5570 HSPA+ (42Mbps) Mobile Broadband Card Device Management */ + {USB_DEVICE_INTERFACE_NUMBER(0x413c, 0x81a3, 2)}, /* Dell Wireless 5570 HSPA+ (42Mbps) Mobile Broadband Card NMEA */ + {USB_DEVICE_INTERFACE_NUMBER(0x413c, 0x81a3, 3)}, /* Dell Wireless 5570 HSPA+ (42Mbps) Mobile Broadband Card Modem */ + {USB_DEVICE_INTERFACE_NUMBER(0x413c, 0x81a4, 0)}, /* Dell Wireless 5570e HSPA+ (42Mbps) Mobile Broadband Card Device Management */ + {USB_DEVICE_INTERFACE_NUMBER(0x413c, 0x81a4, 2)}, /* Dell Wireless 5570e HSPA+ (42Mbps) Mobile Broadband Card NMEA */ + {USB_DEVICE_INTERFACE_NUMBER(0x413c, 0x81a4, 3)}, /* Dell Wireless 5570e HSPA+ (42Mbps) Mobile Broadband Card Modem */ + {USB_DEVICE_INTERFACE_NUMBER(0x413c, 0x81a8, 0)}, /* Dell Wireless 5808 Gobi(TM) 4G LTE Mobile Broadband Card Device Management */ + {USB_DEVICE_INTERFACE_NUMBER(0x413c, 0x81a8, 2)}, /* Dell Wireless 5808 Gobi(TM) 4G LTE Mobile Broadband Card NMEA */ + {USB_DEVICE_INTERFACE_NUMBER(0x413c, 0x81a8, 3)}, /* Dell Wireless 5808 Gobi(TM) 4G LTE Mobile Broadband Card Modem */ + {USB_DEVICE_INTERFACE_NUMBER(0x413c, 0x81a9, 0)}, /* Dell Wireless 5808e Gobi(TM) 4G LTE Mobile Broadband Card Device Management */ + {USB_DEVICE_INTERFACE_NUMBER(0x413c, 0x81a9, 2)}, /* Dell Wireless 5808e Gobi(TM) 4G LTE Mobile Broadband Card NMEA */ + {USB_DEVICE_INTERFACE_NUMBER(0x413c, 0x81a9, 3)}, /* Dell Wireless 5808e Gobi(TM) 4G LTE Mobile Broadband Card Modem */ { } /* Terminating entry */ }; -- cgit v1.2.1 From df602c2d2358f02c6e49cffc5b49b9daa16db033 Mon Sep 17 00:00:00 2001 From: Daniele Forsi Date: Tue, 29 Apr 2014 11:44:03 +0200 Subject: usb: storage: shuttle_usbat: fix discs being detected twice Even if the USB-to-ATAPI converter supported multiple LUNs, this driver would always detect the same physical device or media because it doesn't use srb->device->lun in any way. Tested with an Hewlett-Packard CD-Writer Plus 8200e. Signed-off-by: Daniele Forsi Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/usb/storage/shuttle_usbat.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/usb/storage/shuttle_usbat.c b/drivers/usb/storage/shuttle_usbat.c index 4ef2a80728f7..008d805c3d21 100644 --- a/drivers/usb/storage/shuttle_usbat.c +++ b/drivers/usb/storage/shuttle_usbat.c @@ -1851,7 +1851,7 @@ static int usbat_probe(struct usb_interface *intf, us->transport_name = "Shuttle USBAT"; us->transport = usbat_flash_transport; us->transport_reset = usb_stor_CB_reset; - us->max_lun = 1; + us->max_lun = 0; result = usb_stor_probe2(us); return result; -- cgit v1.2.1 From d183c81929beeba842b74422f754446ef2b8b49c Mon Sep 17 00:00:00 2001 From: Nikita Yushchenko Date: Mon, 28 Apr 2014 19:23:44 +0400 Subject: fsl-usb: do not test for PHY_CLK_VALID bit on controller version 1.6 Per reference manuals of Freescale P1020 and P2020 SoCs, USB controller present in these SoCs has bit 17 of USBx_CONTROL register marked as Reserved - there is no PHY_CLK_VALID bit there. Testing for this bit in ehci_fsl_setup_phy() behaves differently on two P1020RDB boards available here - on one board test passes and fsl-usb init succeeds, but on other board test fails, causing fsl-usb init to fail. This patch changes ehci_fsl_setup_phy() not to test PHY_CLK_VALID on controller version 1.6 that (per manual) does not have this bit. Signed-off-by: Nikita Yushchenko Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/ehci-fsl.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/usb/host/ehci-fsl.c b/drivers/usb/host/ehci-fsl.c index 6f2c8d3899d2..cf2734b532a7 100644 --- a/drivers/usb/host/ehci-fsl.c +++ b/drivers/usb/host/ehci-fsl.c @@ -248,7 +248,8 @@ static int ehci_fsl_setup_phy(struct usb_hcd *hcd, break; } - if (pdata->have_sysif_regs && pdata->controller_ver && + if (pdata->have_sysif_regs && + pdata->controller_ver > FSL_USB_VER_1_6 && (phy_mode == FSL_USB2_PHY_ULPI)) { /* check PHY_CLK_VALID to get phy clk valid */ if (!(spin_event_timeout(in_be32(non_ehci + FSL_SOC_USB_CTRL) & -- cgit v1.2.1 From b790f210fe8423eff881b2a8a93ba5dbc45534d0 Mon Sep 17 00:00:00 2001 From: Michael Welling Date: Fri, 25 Apr 2014 19:27:48 -0500 Subject: tty: serial: 8250_core.c Bug fix for Exar chips. MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The sleep function was updated to put the serial port to sleep only when necessary. This appears to resolve the errant behavior of the driver as described in Kernel Bug 61961 – "My Exar Corp. XR17C/D152 Dual PCI UART modem does not work with 3.8.0". Signed-off-by: Michael Welling Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/8250/8250_core.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/tty/serial/8250/8250_core.c b/drivers/tty/serial/8250/8250_core.c index 0e1bf8858431..2d4bd3929e50 100644 --- a/drivers/tty/serial/8250/8250_core.c +++ b/drivers/tty/serial/8250/8250_core.c @@ -555,7 +555,7 @@ static void serial8250_set_sleep(struct uart_8250_port *p, int sleep) */ if ((p->port.type == PORT_XR17V35X) || (p->port.type == PORT_XR17D15X)) { - serial_out(p, UART_EXAR_SLEEP, 0xff); + serial_out(p, UART_EXAR_SLEEP, sleep ? 0xff : 0); return; } -- cgit v1.2.1 From 4291086b1f081b869c6d79e5b7441633dc3ace00 Mon Sep 17 00:00:00 2001 From: Peter Hurley Date: Sat, 3 May 2014 14:04:59 +0200 Subject: n_tty: Fix n_tty_write crash when echoing in raw mode The tty atomic_write_lock does not provide an exclusion guarantee for the tty driver if the termios settings are LECHO & !OPOST. And since it is unexpected and not allowed to call TTY buffer helpers like tty_insert_flip_string concurrently, this may lead to crashes when concurrect writers call pty_write. In that case the following two writers: * the ECHOing from a workqueue and * pty_write from the process race and can overflow the corresponding TTY buffer like follows. If we look into tty_insert_flip_string_fixed_flag, there is: int space = __tty_buffer_request_room(port, goal, flags); struct tty_buffer *tb = port->buf.tail; ... memcpy(char_buf_ptr(tb, tb->used), chars, space); ... tb->used += space; so the race of the two can result in something like this: A B __tty_buffer_request_room __tty_buffer_request_room memcpy(buf(tb->used), ...) tb->used += space; memcpy(buf(tb->used), ...) ->BOOM B's memcpy is past the tty_buffer due to the previous A's tb->used increment. Since the N_TTY line discipline input processing can output concurrently with a tty write, obtain the N_TTY ldisc output_lock to serialize echo output with normal tty writes. This ensures the tty buffer helper tty_insert_flip_string is not called concurrently and everything is fine. Note that this is nicely reproducible by an ordinary user using forkpty and some setup around that (raw termios + ECHO). And it is present in kernels at least after commit d945cb9cce20ac7143c2de8d88b187f62db99bdc (pty: Rework the pty layer to use the normal buffering logic) in 2.6.31-rc3. js: add more info to the commit log js: switch to bool js: lock unconditionally js: lock only the tty->ops->write call References: CVE-2014-0196 Reported-and-tested-by: Jiri Slaby Signed-off-by: Peter Hurley Signed-off-by: Jiri Slaby Cc: Linus Torvalds Cc: Alan Cox Cc: Signed-off-by: Greg Kroah-Hartman --- drivers/tty/n_tty.c | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'drivers') diff --git a/drivers/tty/n_tty.c b/drivers/tty/n_tty.c index 41fe8a047d37..fe9d129c8735 100644 --- a/drivers/tty/n_tty.c +++ b/drivers/tty/n_tty.c @@ -2353,8 +2353,12 @@ static ssize_t n_tty_write(struct tty_struct *tty, struct file *file, if (tty->ops->flush_chars) tty->ops->flush_chars(tty); } else { + struct n_tty_data *ldata = tty->disc_data; + while (nr > 0) { + mutex_lock(&ldata->output_lock); c = tty->ops->write(tty, b, nr); + mutex_unlock(&ldata->output_lock); if (c < 0) { retval = c; goto break_out; -- cgit v1.2.1 From 501fed45b7e8836ee9373f4d31e2d85e3db6103a Mon Sep 17 00:00:00 2001 From: Tomoki Sekiyama Date: Fri, 2 May 2014 18:58:24 -0400 Subject: drivers/tty/hvc: don't free hvc_console_setup after init When 'console=hvc0' is specified to the kernel parameter in x86 KVM guest, hvc console is setup within a kthread. However, that will cause SEGV and the boot will fail when the driver is builtin to the kernel, because currently hvc_console_setup() is annotated with '__init'. This patch removes '__init' to boot the guest successfully with 'console=hvc0'. Signed-off-by: Tomoki Sekiyama Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/tty/hvc/hvc_console.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/tty/hvc/hvc_console.c b/drivers/tty/hvc/hvc_console.c index 94f9e3a38412..0ff7fda0742f 100644 --- a/drivers/tty/hvc/hvc_console.c +++ b/drivers/tty/hvc/hvc_console.c @@ -190,7 +190,7 @@ static struct tty_driver *hvc_console_device(struct console *c, int *index) return hvc_driver; } -static int __init hvc_console_setup(struct console *co, char *options) +static int hvc_console_setup(struct console *co, char *options) { if (co->index < 0 || co->index >= MAX_NR_HVC_CONSOLES) return -ENODEV; -- cgit v1.2.1 From 5fbf1a65dd53ef313783c34a0e93a6e29def6136 Mon Sep 17 00:00:00 2001 From: Peter Hurley Date: Fri, 2 May 2014 10:56:11 -0400 Subject: Revert "tty: Fix race condition between __tty_buffer_request_room and flush_to_ldisc" This reverts commit 6a20dbd6caa2358716136144bf524331d70b1e03. Although the commit correctly identifies an unsafe race condition between __tty_buffer_request_room() and flush_to_ldisc(), the commit fixes the race with an unnecessary spinlock in a lockless algorithm. The follow-on commit, "tty: Fix lockless tty buffer race" fixes the race locklessly. Signed-off-by: Peter Hurley Signed-off-by: Greg Kroah-Hartman --- drivers/tty/tty_buffer.c | 16 ++-------------- 1 file changed, 2 insertions(+), 14 deletions(-) (limited to 'drivers') diff --git a/drivers/tty/tty_buffer.c b/drivers/tty/tty_buffer.c index f1d30f6945af..8ebd9f88a6f6 100644 --- a/drivers/tty/tty_buffer.c +++ b/drivers/tty/tty_buffer.c @@ -255,16 +255,11 @@ static int __tty_buffer_request_room(struct tty_port *port, size_t size, if (change || left < size) { /* This is the slow path - looking for new buffers to use */ if ((n = tty_buffer_alloc(port, size)) != NULL) { - unsigned long iflags; - n->flags = flags; buf->tail = n; - - spin_lock_irqsave(&buf->flush_lock, iflags); b->commit = b->used; + smp_mb(); b->next = n; - spin_unlock_irqrestore(&buf->flush_lock, iflags); - } else if (change) size = 0; else @@ -448,7 +443,6 @@ static void flush_to_ldisc(struct work_struct *work) mutex_lock(&buf->lock); while (1) { - unsigned long flags; struct tty_buffer *head = buf->head; int count; @@ -456,19 +450,14 @@ static void flush_to_ldisc(struct work_struct *work) if (atomic_read(&buf->priority)) break; - spin_lock_irqsave(&buf->flush_lock, flags); count = head->commit - head->read; if (!count) { - if (head->next == NULL) { - spin_unlock_irqrestore(&buf->flush_lock, flags); + if (head->next == NULL) break; - } buf->head = head->next; - spin_unlock_irqrestore(&buf->flush_lock, flags); tty_buffer_free(port, head); continue; } - spin_unlock_irqrestore(&buf->flush_lock, flags); count = receive_buf(tty, head, count); if (!count) @@ -523,7 +512,6 @@ void tty_buffer_init(struct tty_port *port) struct tty_bufhead *buf = &port->buf; mutex_init(&buf->lock); - spin_lock_init(&buf->flush_lock); tty_buffer_reset(&buf->sentinel, 0); buf->head = &buf->sentinel; buf->tail = &buf->sentinel; -- cgit v1.2.1 From 62a0d8d7c2b29f92850e4ee3c38e5dfd936e92b2 Mon Sep 17 00:00:00 2001 From: Peter Hurley Date: Fri, 2 May 2014 10:56:12 -0400 Subject: tty: Fix lockless tty buffer race Commit 6a20dbd6caa2358716136144bf524331d70b1e03, "tty: Fix race condition between __tty_buffer_request_room and flush_to_ldisc" correctly identifies an unsafe race condition between __tty_buffer_request_room() and flush_to_ldisc(), where the consumer flush_to_ldisc() prematurely advances the head before consuming the last of the data committed. For example: CPU 0 | CPU 1 __tty_buffer_request_room | flush_to_ldisc ... | ... | count = head->commit - head->read n = tty_buffer_alloc() | b->commit = b->used | b->next = n | | if (!count) /* T */ | if (head->next == NULL) /* F */ | buf->head = head->next In this case, buf->head has been advanced but head->commit may have been updated with a new value. Instead of reintroducing an unnecessary lock, fix the race locklessly. Read the commit-next pair in the reverse order of writing, which guarantees the commit value read is the latest value written if the head is advancing. Reported-by: Manfred Schlaegl Cc: # 3.12.x+ Signed-off-by: Peter Hurley Signed-off-by: Greg Kroah-Hartman --- drivers/tty/tty_buffer.c | 17 ++++++++++++++--- 1 file changed, 14 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/tty/tty_buffer.c b/drivers/tty/tty_buffer.c index 8ebd9f88a6f6..cf78d1985cd8 100644 --- a/drivers/tty/tty_buffer.c +++ b/drivers/tty/tty_buffer.c @@ -258,7 +258,11 @@ static int __tty_buffer_request_room(struct tty_port *port, size_t size, n->flags = flags; buf->tail = n; b->commit = b->used; - smp_mb(); + /* paired w/ barrier in flush_to_ldisc(); ensures the + * latest commit value can be read before the head is + * advanced to the next buffer + */ + smp_wmb(); b->next = n; } else if (change) size = 0; @@ -444,17 +448,24 @@ static void flush_to_ldisc(struct work_struct *work) while (1) { struct tty_buffer *head = buf->head; + struct tty_buffer *next; int count; /* Ldisc or user is trying to gain exclusive access */ if (atomic_read(&buf->priority)) break; + next = head->next; + /* paired w/ barrier in __tty_buffer_request_room(); + * ensures commit value read is not stale if the head + * is advancing to the next buffer + */ + smp_rmb(); count = head->commit - head->read; if (!count) { - if (head->next == NULL) + if (next == NULL) break; - buf->head = head->next; + buf->head = next; tty_buffer_free(port, head); continue; } -- cgit v1.2.1 From f0ef5d41792a46a1085dead9dfb0bdb2c574638e Mon Sep 17 00:00:00 2001 From: "Victor A. Santos" Date: Sat, 26 Apr 2014 23:20:14 -0300 Subject: USB: Nokia 305 should be treated as unusual dev Signed-off-by: Victor A. Santos Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/usb/storage/unusual_devs.h | 7 +++++++ 1 file changed, 7 insertions(+) (limited to 'drivers') diff --git a/drivers/usb/storage/unusual_devs.h b/drivers/usb/storage/unusual_devs.h index f4a82291894a..6eee0ced7330 100644 --- a/drivers/usb/storage/unusual_devs.h +++ b/drivers/usb/storage/unusual_devs.h @@ -234,6 +234,13 @@ UNUSUAL_DEV( 0x0421, 0x0495, 0x0370, 0x0370, USB_SC_DEVICE, USB_PR_DEVICE, NULL, US_FL_MAX_SECTORS_64 ), +/* Patch submitted by Victor A. Santos */ +UNUSUAL_DEV( 0x0421, 0x05af, 0x0742, 0x0742, + "Nokia", + "305", + USB_SC_DEVICE, USB_PR_DEVICE, NULL, + US_FL_MAX_SECTORS_64), + /* Patch submitted by Mikhail Zolotaryov */ UNUSUAL_DEV( 0x0421, 0x06aa, 0x1110, 0x1110, "Nokia", -- cgit v1.2.1 From 6ed07d45d09bc2aa60e27b845543db9972e22a38 Mon Sep 17 00:00:00 2001 From: Daniele Forsi Date: Mon, 28 Apr 2014 17:09:11 +0200 Subject: USB: Nokia 5300 should be treated as unusual dev Signed-off-by: Daniele Forsi Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/usb/storage/unusual_devs.h | 7 +++++++ 1 file changed, 7 insertions(+) (limited to 'drivers') diff --git a/drivers/usb/storage/unusual_devs.h b/drivers/usb/storage/unusual_devs.h index 6eee0ced7330..174a447868cd 100644 --- a/drivers/usb/storage/unusual_devs.h +++ b/drivers/usb/storage/unusual_devs.h @@ -234,6 +234,13 @@ UNUSUAL_DEV( 0x0421, 0x0495, 0x0370, 0x0370, USB_SC_DEVICE, USB_PR_DEVICE, NULL, US_FL_MAX_SECTORS_64 ), +/* Reported by Daniele Forsi */ +UNUSUAL_DEV( 0x0421, 0x04b9, 0x0350, 0x0350, + "Nokia", + "5300", + USB_SC_DEVICE, USB_PR_DEVICE, NULL, + US_FL_MAX_SECTORS_64 ), + /* Patch submitted by Victor A. Santos */ UNUSUAL_DEV( 0x0421, 0x05af, 0x0742, 0x0742, "Nokia", -- cgit v1.2.1 From e715eb2e73918f4cefbba0b717ff8902e8030b39 Mon Sep 17 00:00:00 2001 From: Catalin Marinas Date: Mon, 28 Apr 2014 17:08:37 +0100 Subject: vexpress: Initialise the sysregs before setting up the clocks Following arm64 commit bc3ee18a7a57 (arm64: init: Move of_clk_init to time_init()), vexpress_osc_of_setup() is called via of_clk_init() long before initcalls are issued. Initialising the vexpress oscillators requires the vespress sysregs to be already initialised, so this patch adds an explicit call to vexpress_sysreg_of_early_init() in vexpress oscillator setup function. Signed-off-by: Catalin Marinas Tested-by: Will Deacon Acked-by: Will Deacon Tested-by: Pawel Moll Acked-by: Pawel Moll Cc: Mike Turquette --- drivers/clk/versatile/clk-vexpress-osc.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'drivers') diff --git a/drivers/clk/versatile/clk-vexpress-osc.c b/drivers/clk/versatile/clk-vexpress-osc.c index a535c7bf8574..422391242b39 100644 --- a/drivers/clk/versatile/clk-vexpress-osc.c +++ b/drivers/clk/versatile/clk-vexpress-osc.c @@ -100,6 +100,8 @@ void __init vexpress_osc_of_setup(struct device_node *node) struct clk *clk; u32 range[2]; + vexpress_sysreg_of_early_init(); + osc = kzalloc(sizeof(*osc), GFP_KERNEL); if (!osc) return; -- cgit v1.2.1 From 24a9ad5b82929cdeaff70018d82263de0c34c45d Mon Sep 17 00:00:00 2001 From: Shawn Guo Date: Sun, 4 May 2014 21:48:05 +0800 Subject: ahci: imx: add namespace for register enums Update register enums a little bit to add proper namespace prefix, and have the names match i.MX reference manual. Signed-off-by: Shawn Guo Signed-off-by: Tejun Heo --- drivers/ata/ahci_imx.c | 16 +++++++++------- 1 file changed, 9 insertions(+), 7 deletions(-) (limited to 'drivers') diff --git a/drivers/ata/ahci_imx.c b/drivers/ata/ahci_imx.c index 497c7abe1c7d..776757634e90 100644 --- a/drivers/ata/ahci_imx.c +++ b/drivers/ata/ahci_imx.c @@ -29,9 +29,11 @@ #include "ahci.h" enum { - PORT_PHY_CTL = 0x178, /* Port0 PHY Control */ - PORT_PHY_CTL_PDDQ_LOC = 0x100000, /* PORT_PHY_CTL bits */ - HOST_TIMER1MS = 0xe0, /* Timer 1-ms */ + /* Timer 1-ms Register */ + IMX_TIMER1MS = 0x00e0, + /* Port0 PHY Control Register */ + IMX_P0PHYCR = 0x0178, + IMX_P0PHYCR_TEST_PDDQ = 1 << 20, }; enum ahci_imx_type { @@ -156,8 +158,8 @@ static void ahci_imx_error_handler(struct ata_port *ap) * without full reset once the pddq mode is enabled making it * impossible to use as part of libata LPM. */ - reg_val = readl(mmio + PORT_PHY_CTL); - writel(reg_val | PORT_PHY_CTL_PDDQ_LOC, mmio + PORT_PHY_CTL); + reg_val = readl(mmio + IMX_P0PHYCR); + writel(reg_val | IMX_P0PHYCR_TEST_PDDQ, mmio + IMX_P0PHYCR); imx_sata_disable(hpriv); imxpriv->no_device = true; } @@ -248,7 +250,7 @@ static int imx_ahci_probe(struct platform_device *pdev) /* * Configure the HWINIT bits of the HOST_CAP and HOST_PORTS_IMPL, - * and IP vendor specific register HOST_TIMER1MS. + * and IP vendor specific register IMX_TIMER1MS. * Configure CAP_SSS (support stagered spin up). * Implement the port0. * Get the ahb clock rate, and configure the TIMER1MS register. @@ -265,7 +267,7 @@ static int imx_ahci_probe(struct platform_device *pdev) } reg_val = clk_get_rate(imxpriv->ahb_clk) / 1000; - writel(reg_val, hpriv->mmio + HOST_TIMER1MS); + writel(reg_val, hpriv->mmio + IMX_TIMER1MS); ret = ahci_platform_init_host(pdev, hpriv, &ahci_imx_port_info, 0, 0); if (ret) -- cgit v1.2.1 From e783c51cce94521c10e599e991acdcfd9a996c4a Mon Sep 17 00:00:00 2001 From: Shawn Guo Date: Sun, 4 May 2014 21:48:06 +0800 Subject: ahci: imx: software workaround for phy reset issue in resume When suspending imx6q systems which have rootfs on SATA, the following error will likely be seen in resume. The SATA link will fail to come up, and it results in an unusable system across the suspend/resume cycle. $ echo mem > /sys/power/state PM: Syncing filesystems ... done. PM: Preparing system for mem sleep Freezing user space processes ... (elapsed 0.002 seconds) done. Freezing remaining freezable tasks ... (elapsed 0.002 seconds) done. PM: Entering mem sleep sd 0:0:0:0: [sda] Synchronizing SCSI cache sd 0:0:0:0: [sda] Stopping disk PM: suspend of devices complete after 61.914 msecs PM: suspend devices took 0.070 seconds PM: late suspend of devices complete after 4.906 msecs PM: noirq suspend of devices complete after 4.521 msecs Disabling non-boot CPUs ... CPU1: shutdown CPU2: shutdown CPU3: shutdown Enabling non-boot CPUs ... CPU1: Booted secondary processor CPU1 is up CPU2: Booted secondary processor CPU2 is up CPU3: Booted secondary processor CPU3 is up PM: noirq resume of devices complete after 10.486 msecs PM: early resume of devices complete after 4.679 msecs sd 0:0:0:0: [sda] Starting disk PM: resume of devices complete after 22.674 msecs PM: resume devices took 0.030 seconds PM: Finishing wakeup. Restarting tasks ... done. $ ata1: SATA link down (SStatus 1 SControl 300) ata1: SATA link down (SStatus 1 SControl 300) ata1: limiting SATA link speed to 1.5 Gbps ata1: SATA link down (SStatus 1 SControl 310) ata1.00: disabled ata1: exception Emask 0x10 SAct 0x0 SErr 0x4040000 action 0xe frozen t4 ata1: irq_stat 0x00000040, connection status changed ata1: SError: { CommWake DevExch } ata1: hard resetting link sd 0:0:0:0: rejecting I/O to offline device sd 0:0:0:0: killing request sd 0:0:0:0: rejecting I/O to offline device Aborting journal on device sda2-8. sd 0:0:0:0: rejecting I/O to offline device EXT4-fs warning (device sda2): ext4_end_bio:317: I/O error writing to inode 132577 (offset 0 size 0 starting block 26235) Buffer I/O error on device sda2, logical block 10169 ... It's caused by a silicon issue that SATA phy does not get reset by controller when coming back from LPM. The patch adds a software workaround for this issue. It enforces a software reset on SATA phy in imx_sata_enable() function, so that we can ensure SATA link will come up properly in both power-on and resume. The software reset is implemented by writing phy reset register through the phy control register bus interface. Functions imx_phy_reg_[addressing|write|read]() implement this bus interface, while imx_sata_phy_reset() performs the actually reset operation. Signed-off-by: Richard Zhu Signed-off-by: Shawn Guo Signed-off-by: Tejun Heo --- drivers/ata/ahci_imx.c | 161 +++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 161 insertions(+) (limited to 'drivers') diff --git a/drivers/ata/ahci_imx.c b/drivers/ata/ahci_imx.c index 776757634e90..5824d99e63fd 100644 --- a/drivers/ata/ahci_imx.c +++ b/drivers/ata/ahci_imx.c @@ -34,6 +34,20 @@ enum { /* Port0 PHY Control Register */ IMX_P0PHYCR = 0x0178, IMX_P0PHYCR_TEST_PDDQ = 1 << 20, + IMX_P0PHYCR_CR_READ = 1 << 19, + IMX_P0PHYCR_CR_WRITE = 1 << 18, + IMX_P0PHYCR_CR_CAP_DATA = 1 << 17, + IMX_P0PHYCR_CR_CAP_ADDR = 1 << 16, + /* Port0 PHY Status Register */ + IMX_P0PHYSR = 0x017c, + IMX_P0PHYSR_CR_ACK = 1 << 18, + IMX_P0PHYSR_CR_DATA_OUT = 0xffff << 0, + /* Lane0 Output Status Register */ + IMX_LANE0_OUT_STAT = 0x2003, + IMX_LANE0_OUT_STAT_RX_PLL_STATE = 1 << 1, + /* Clock Reset Register */ + IMX_CLOCK_RESET = 0x7f3f, + IMX_CLOCK_RESET_RESET = 1 << 0, }; enum ahci_imx_type { @@ -56,9 +70,149 @@ MODULE_PARM_DESC(hotplug, "AHCI IMX hot-plug support (0=Don't support, 1=support static void ahci_imx_host_stop(struct ata_host *host); +static int imx_phy_crbit_assert(void __iomem *mmio, u32 bit, bool assert) +{ + int timeout = 10; + u32 crval; + u32 srval; + + /* Assert or deassert the bit */ + crval = readl(mmio + IMX_P0PHYCR); + if (assert) + crval |= bit; + else + crval &= ~bit; + writel(crval, mmio + IMX_P0PHYCR); + + /* Wait for the cr_ack signal */ + do { + srval = readl(mmio + IMX_P0PHYSR); + if ((assert ? srval : ~srval) & IMX_P0PHYSR_CR_ACK) + break; + usleep_range(100, 200); + } while (--timeout); + + return timeout ? 0 : -ETIMEDOUT; +} + +static int imx_phy_reg_addressing(u16 addr, void __iomem *mmio) +{ + u32 crval = addr; + int ret; + + /* Supply the address on cr_data_in */ + writel(crval, mmio + IMX_P0PHYCR); + + /* Assert the cr_cap_addr signal */ + ret = imx_phy_crbit_assert(mmio, IMX_P0PHYCR_CR_CAP_ADDR, true); + if (ret) + return ret; + + /* Deassert cr_cap_addr */ + ret = imx_phy_crbit_assert(mmio, IMX_P0PHYCR_CR_CAP_ADDR, false); + if (ret) + return ret; + + return 0; +} + +static int imx_phy_reg_write(u16 val, void __iomem *mmio) +{ + u32 crval = val; + int ret; + + /* Supply the data on cr_data_in */ + writel(crval, mmio + IMX_P0PHYCR); + + /* Assert the cr_cap_data signal */ + ret = imx_phy_crbit_assert(mmio, IMX_P0PHYCR_CR_CAP_DATA, true); + if (ret) + return ret; + + /* Deassert cr_cap_data */ + ret = imx_phy_crbit_assert(mmio, IMX_P0PHYCR_CR_CAP_DATA, false); + if (ret) + return ret; + + if (val & IMX_CLOCK_RESET_RESET) { + /* + * In case we're resetting the phy, it's unable to acknowledge, + * so we return immediately here. + */ + crval |= IMX_P0PHYCR_CR_WRITE; + writel(crval, mmio + IMX_P0PHYCR); + goto out; + } + + /* Assert the cr_write signal */ + ret = imx_phy_crbit_assert(mmio, IMX_P0PHYCR_CR_WRITE, true); + if (ret) + return ret; + + /* Deassert cr_write */ + ret = imx_phy_crbit_assert(mmio, IMX_P0PHYCR_CR_WRITE, false); + if (ret) + return ret; + +out: + return 0; +} + +static int imx_phy_reg_read(u16 *val, void __iomem *mmio) +{ + int ret; + + /* Assert the cr_read signal */ + ret = imx_phy_crbit_assert(mmio, IMX_P0PHYCR_CR_READ, true); + if (ret) + return ret; + + /* Capture the data from cr_data_out[] */ + *val = readl(mmio + IMX_P0PHYSR) & IMX_P0PHYSR_CR_DATA_OUT; + + /* Deassert cr_read */ + ret = imx_phy_crbit_assert(mmio, IMX_P0PHYCR_CR_READ, false); + if (ret) + return ret; + + return 0; +} + +static int imx_sata_phy_reset(struct ahci_host_priv *hpriv) +{ + void __iomem *mmio = hpriv->mmio; + int timeout = 10; + u16 val; + int ret; + + /* Reset SATA PHY by setting RESET bit of PHY register CLOCK_RESET */ + ret = imx_phy_reg_addressing(IMX_CLOCK_RESET, mmio); + if (ret) + return ret; + ret = imx_phy_reg_write(IMX_CLOCK_RESET_RESET, mmio); + if (ret) + return ret; + + /* Wait for PHY RX_PLL to be stable */ + do { + usleep_range(100, 200); + ret = imx_phy_reg_addressing(IMX_LANE0_OUT_STAT, mmio); + if (ret) + return ret; + ret = imx_phy_reg_read(&val, mmio); + if (ret) + return ret; + if (val & IMX_LANE0_OUT_STAT_RX_PLL_STATE) + break; + } while (--timeout); + + return timeout ? 0 : -ETIMEDOUT; +} + static int imx_sata_enable(struct ahci_host_priv *hpriv) { struct imx_ahci_priv *imxpriv = hpriv->plat_data; + struct device *dev = &imxpriv->ahci_pdev->dev; int ret; if (imxpriv->no_device) @@ -103,6 +257,12 @@ static int imx_sata_enable(struct ahci_host_priv *hpriv) regmap_update_bits(imxpriv->gpr, IOMUXC_GPR13, IMX6Q_GPR13_SATA_MPLL_CLK_EN, IMX6Q_GPR13_SATA_MPLL_CLK_EN); + + ret = imx_sata_phy_reset(hpriv); + if (ret) { + dev_err(dev, "failed to reset phy: %d\n", ret); + goto disable_regulator; + } } usleep_range(1000, 2000); @@ -219,6 +379,7 @@ static int imx_ahci_probe(struct platform_device *pdev) if (!imxpriv) return -ENOMEM; + imxpriv->ahci_pdev = pdev; imxpriv->no_device = false; imxpriv->first_time = true; imxpriv->type = (enum ahci_imx_type)of_id->data; -- cgit v1.2.1 From 3cf0b0311e746a26dcc7c0b5ba0756f61d636a33 Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Sat, 3 May 2014 23:27:00 +0300 Subject: agp: info leak in agpioc_info_wrap() On 64 bit systems the agp_info struct has a 4 byte hole between ->agp_mode and ->aper_base. We need to clear it to avoid disclosing stack information to userspace. Signed-off-by: Dan Carpenter Signed-off-by: Dave Airlie --- drivers/char/agp/frontend.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/char/agp/frontend.c b/drivers/char/agp/frontend.c index 8121b4c70ede..b29703324e94 100644 --- a/drivers/char/agp/frontend.c +++ b/drivers/char/agp/frontend.c @@ -730,6 +730,7 @@ static int agpioc_info_wrap(struct agp_file_private *priv, void __user *arg) agp_copy_info(agp_bridge, &kerninfo); + memset(&userinfo, 0, sizeof(userinfo)); userinfo.version.major = kerninfo.version.major; userinfo.version.minor = kerninfo.version.minor; userinfo.bridge_id = kerninfo.device->vendor | -- cgit v1.2.1 From 87ed89d21ede38f86be9419ca7c6dd4761764bbb Mon Sep 17 00:00:00 2001 From: Tanya Brokhman Date: Tue, 1 Apr 2014 11:01:12 +0300 Subject: UBI: fix error path in __wl_get_peb In case of an error (if there are not free PEB's for example), __wl_get_peb will return a negative value. In order to prevent access violation we need to test the returned value prior to using it later on. Signed-off-by: Tatyana Brokhman Reviewed-by: Dolev Raviv Acked-by: Richard Weinberger Signed-off-by: Artem Bityutskiy --- drivers/mtd/ubi/wl.c | 3 +++ 1 file changed, 3 insertions(+) (limited to 'drivers') diff --git a/drivers/mtd/ubi/wl.c b/drivers/mtd/ubi/wl.c index 02317c1c0238..457ead32105c 100644 --- a/drivers/mtd/ubi/wl.c +++ b/drivers/mtd/ubi/wl.c @@ -684,6 +684,9 @@ int ubi_wl_get_peb(struct ubi_device *ubi) peb = __wl_get_peb(ubi); spin_unlock(&ubi->wl_lock); + if (peb < 0) + return peb; + err = ubi_self_check_all_ff(ubi, peb, ubi->vid_hdr_aloffset, ubi->peb_size - ubi->vid_hdr_aloffset); if (err) { -- cgit v1.2.1 From 3d21bb7667c4b57a15077d60d23385d9a1c01d08 Mon Sep 17 00:00:00 2001 From: Tanya Brokhman Date: Tue, 1 Apr 2014 11:02:07 +0300 Subject: UBI: fix ubi free PEBs count calculation The ubi->free_count should be updated with every insert/remove to/from the ubi->free list. Signed-off-by: Tanya Brokhman Reviewed-by: Dolev Raviv Acked-by: Richard Weinberger Signed-off-by: Artem Bityutskiy --- drivers/mtd/ubi/wl.c | 3 +++ 1 file changed, 3 insertions(+) (limited to 'drivers') diff --git a/drivers/mtd/ubi/wl.c b/drivers/mtd/ubi/wl.c index 457ead32105c..0f3425dac910 100644 --- a/drivers/mtd/ubi/wl.c +++ b/drivers/mtd/ubi/wl.c @@ -671,6 +671,8 @@ static struct ubi_wl_entry *get_peb_for_wl(struct ubi_device *ubi) e = find_wl_entry(ubi, &ubi->free, WL_FREE_MAX_DIFF); self_check_in_wl_tree(ubi, e, &ubi->free); + ubi->free_count--; + ubi_assert(ubi->free_count >= 0); rb_erase(&e->u.rb, &ubi->free); return e; @@ -1071,6 +1073,7 @@ static int wear_leveling_worker(struct ubi_device *ubi, struct ubi_work *wrk, /* Give the unused PEB back */ wl_tree_add(e2, &ubi->free); + ubi->free_count++; goto out_cancel; } self_check_in_wl_tree(ubi, e1, &ubi->used); -- cgit v1.2.1 From bebfef150e0b8fa68704cddacf05b8c26462d565 Mon Sep 17 00:00:00 2001 From: Kees Cook Date: Mon, 7 Apr 2014 21:44:07 -0700 Subject: UBI: avoid workqueue format string leak When building the name for the workqueue thread, make sure a format string cannot leak in from the disk name. Signed-off-by: Kees Cook Signed-off-by: Artem Bityutskiy --- drivers/mtd/ubi/block.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/mtd/ubi/block.c b/drivers/mtd/ubi/block.c index 7ff473c871a9..8d659e6a1b4c 100644 --- a/drivers/mtd/ubi/block.c +++ b/drivers/mtd/ubi/block.c @@ -431,7 +431,7 @@ int ubiblock_create(struct ubi_volume_info *vi) * Create one workqueue per volume (per registered block device). * Rembember workqueues are cheap, they're not threads. */ - dev->wq = alloc_workqueue(gd->disk_name, 0, 0); + dev->wq = alloc_workqueue("%s", 0, 0, gd->disk_name); if (!dev->wq) goto out_free_queue; INIT_WORK(&dev->work, ubiblock_do_work); -- cgit v1.2.1 From 19e4ec525b37cdecbdb4f86edaae7f56a67339ee Mon Sep 17 00:00:00 2001 From: Benjamin Tissoires Date: Wed, 30 Apr 2014 17:48:40 -0400 Subject: HID: core: fix computation of the report size The extra seven bits are only required when allocating the report buffer. We can not use those extra bytes for the length of the report in the generic implementation of .request because the device might (will) refuse the set_report command. This has been verified on the Atmel touchpad found on the Samsung Ativ 9 plus, which uses hid-multitouch and HID over I2C. Without this fix, the device refuses to switch to the multitouch mode, and it becomes unresponsive from the user point of view. Actually, this has been discussed during the initial submission of the commit 4fa5a7f76cc7b6ac87f57741edd2b124851d119f, see https://patchwork.kernel.org/patch/3621751/ Unfortunately, I completely forgot about it later. Reported-by: Matthias Bayer Signed-off-by: Benjamin Tissoires Signed-off-by: Jiri Kosina --- drivers/hid/hid-core.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/hid/hid-core.c b/drivers/hid/hid-core.c index 10a2c0866459..da52279de939 100644 --- a/drivers/hid/hid-core.c +++ b/drivers/hid/hid-core.c @@ -1253,7 +1253,8 @@ EXPORT_SYMBOL_GPL(hid_output_report); static int hid_report_len(struct hid_report *report) { - return ((report->size - 1) >> 3) + 1 + (report->id > 0) + 7; + /* equivalent to DIV_ROUND_UP(report->size, 8) + !!(report->id > 0) */ + return ((report->size - 1) >> 3) + 1 + (report->id > 0); } /* @@ -1266,7 +1267,7 @@ u8 *hid_alloc_report_buf(struct hid_report *report, gfp_t flags) * of implement() working on 8 byte chunks */ - int len = hid_report_len(report); + int len = hid_report_len(report) + 7; return kmalloc(len, flags); } -- cgit v1.2.1 From 2f433083e854ec72c19dc9b0e1cebcc8e230fd75 Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Fri, 2 May 2014 19:48:13 +0200 Subject: HID: add NO_INIT_REPORTS quirk for Synaptics Touch Pad V 103S This touchpad seriously dislikes init reports, not only timeing out, but also refusing to work after this. Cc: stable@vger.kernel.org Reported-and-tested-by: Vincent Fortier Signed-off-by: Hans de Goede Reviewed-by: Benjamin Tissoires Signed-off-by: Jiri Kosina --- drivers/hid/hid-ids.h | 1 + drivers/hid/usbhid/hid-quirks.c | 1 + 2 files changed, 2 insertions(+) (limited to 'drivers') diff --git a/drivers/hid/hid-ids.h b/drivers/hid/hid-ids.h index e7e44f53db59..5c75774cdaf2 100644 --- a/drivers/hid/hid-ids.h +++ b/drivers/hid/hid-ids.h @@ -837,6 +837,7 @@ #define USB_DEVICE_ID_SYNAPTICS_LTS2 0x1d10 #define USB_DEVICE_ID_SYNAPTICS_HD 0x0ac3 #define USB_DEVICE_ID_SYNAPTICS_QUAD_HD 0x1ac3 +#define USB_DEVICE_ID_SYNAPTICS_TP_V103 0x5710 #define USB_VENDOR_ID_THINGM 0x27b8 #define USB_DEVICE_ID_BLINK1 0x01ed diff --git a/drivers/hid/usbhid/hid-quirks.c b/drivers/hid/usbhid/hid-quirks.c index dbd83878ff99..8e4ddb369883 100644 --- a/drivers/hid/usbhid/hid-quirks.c +++ b/drivers/hid/usbhid/hid-quirks.c @@ -119,6 +119,7 @@ static const struct hid_blacklist { { USB_VENDOR_ID_SYNAPTICS, USB_DEVICE_ID_SYNAPTICS_LTS2, HID_QUIRK_NO_INIT_REPORTS }, { USB_VENDOR_ID_SYNAPTICS, USB_DEVICE_ID_SYNAPTICS_HD, HID_QUIRK_NO_INIT_REPORTS }, { USB_VENDOR_ID_SYNAPTICS, USB_DEVICE_ID_SYNAPTICS_QUAD_HD, HID_QUIRK_NO_INIT_REPORTS }, + { USB_VENDOR_ID_SYNAPTICS, USB_DEVICE_ID_SYNAPTICS_TP_V103, HID_QUIRK_NO_INIT_REPORTS }, { 0, 0 } }; -- cgit v1.2.1 From ef87dbe7614341c2e7bfe8d32fcb7028cc97442c Mon Sep 17 00:00:00 2001 From: Matthew Daley Date: Mon, 28 Apr 2014 19:05:20 +1200 Subject: floppy: ignore kernel-only members in FDRAWCMD ioctl input Always clear out these floppy_raw_cmd struct members after copying the entire structure from userspace so that the in-kernel version is always valid and never left in an interdeterminate state. Signed-off-by: Matthew Daley Signed-off-by: Linus Torvalds --- drivers/block/floppy.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/block/floppy.c b/drivers/block/floppy.c index 8f5565bf34cd..12251a688871 100644 --- a/drivers/block/floppy.c +++ b/drivers/block/floppy.c @@ -3121,10 +3121,11 @@ loop: return -ENOMEM; *rcmd = ptr; ret = copy_from_user(ptr, param, sizeof(*ptr)); - if (ret) - return -EFAULT; ptr->next = NULL; ptr->buffer_length = 0; + ptr->kernel_data = NULL; + if (ret) + return -EFAULT; param += sizeof(struct floppy_raw_cmd); if (ptr->cmd_count > 33) /* the command may now also take up the space @@ -3140,7 +3141,6 @@ loop: for (i = 0; i < 16; i++) ptr->reply[i] = 0; ptr->resultcode = 0; - ptr->kernel_data = NULL; if (ptr->flags & (FD_RAW_READ | FD_RAW_WRITE)) { if (ptr->length <= 0) -- cgit v1.2.1 From 2145e15e0557a01b9195d1c7199a1b92cb9be81f Mon Sep 17 00:00:00 2001 From: Matthew Daley Date: Mon, 28 Apr 2014 19:05:21 +1200 Subject: floppy: don't write kernel-only members to FDRAWCMD ioctl output Do not leak kernel-only floppy_raw_cmd structure members to userspace. This includes the linked-list pointer and the pointer to the allocated DMA space. Signed-off-by: Matthew Daley Signed-off-by: Linus Torvalds --- drivers/block/floppy.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/block/floppy.c b/drivers/block/floppy.c index 12251a688871..fa9bb742df6e 100644 --- a/drivers/block/floppy.c +++ b/drivers/block/floppy.c @@ -3067,7 +3067,10 @@ static int raw_cmd_copyout(int cmd, void __user *param, int ret; while (ptr) { - ret = copy_to_user(param, ptr, sizeof(*ptr)); + struct floppy_raw_cmd cmd = *ptr; + cmd.next = NULL; + cmd.kernel_data = NULL; + ret = copy_to_user(param, &cmd, sizeof(cmd)); if (ret) return -EFAULT; param += sizeof(struct floppy_raw_cmd); -- cgit v1.2.1 From 9d4619c492c84e4c1e6d7127f1cbf55da04599d0 Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Fri, 2 May 2014 06:29:21 +0200 Subject: Altera TSE: ALTERA_TSE should depend on HAS_DMA If NO_DMA=y: drivers/built-in.o: In function `altera_tse_probe': altera_tse_main.c:(.text+0x25ec2e): undefined reference to `dma_set_mask' altera_tse_main.c:(.text+0x25ec78): undefined reference to `dma_supported' altera_tse_main.c:(.text+0x25ecb6): undefined reference to `dma_supported' drivers/built-in.o: In function `sgdma_async_read': altera_sgdma.c:(.text+0x25f620): undefined reference to `dma_sync_single_for_cpu' drivers/built-in.o: In function `sgdma_uninitialize': (.text+0x25f678): undefined reference to `dma_unmap_single' drivers/built-in.o: In function `sgdma_uninitialize': (.text+0x25f696): undefined reference to `dma_unmap_single' drivers/built-in.o: In function `sgdma_initialize': (.text+0x25f6f0): undefined reference to `dma_map_single' drivers/built-in.o: In function `sgdma_initialize': (.text+0x25f702): undefined reference to `dma_mapping_error' drivers/built-in.o: In function `sgdma_tx_buffer': (.text+0x25f92a): undefined reference to `dma_sync_single_for_cpu' drivers/built-in.o: In function `sgdma_rx_status': (.text+0x25fa24): undefined reference to `dma_sync_single_for_cpu' make[3]: *** [vmlinux] Error 1 Signed-off-by: Geert Uytterhoeven Acked-by: Vince Bridgers Signed-off-by: David S. Miller --- drivers/net/ethernet/altera/Kconfig | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/net/ethernet/altera/Kconfig b/drivers/net/ethernet/altera/Kconfig index 80c1ab74a4b8..fdddba51473e 100644 --- a/drivers/net/ethernet/altera/Kconfig +++ b/drivers/net/ethernet/altera/Kconfig @@ -1,5 +1,6 @@ config ALTERA_TSE tristate "Altera Triple-Speed Ethernet MAC support" + depends on HAS_DMA select PHYLIB ---help--- This driver supports the Altera Triple-Speed (TSE) Ethernet MAC. -- cgit v1.2.1 From 9becd707841207652449a8dfd90fe9c476d88546 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Bj=C3=B8rn=20Mork?= Date: Fri, 2 May 2014 23:27:00 +0200 Subject: net: cdc_ncm: fix buffer overflow MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Commit 4d619f625a60 ("net: cdc_ncm: no point in filling up the NTBs if we send ZLPs") changed the padding logic for devices with the ZLP flag set. This meant that frames of any size will be sent without additional padding, except for the single byte added if the size is a multiple of the USB packet size. But if the unpadded size is identical to the maximum frame size, and the maximum size is a multiplum of the USB packet size, then this one-byte padding will overflow the buffer. Prevent padding if already at maximum frame size, letting usbnet transmit a ZLP instead in this case. Fixes: 4d619f625a60 ("net: cdc_ncm: no point in filling up the NTBs if we send ZLPs") Reported by: Yu-an Shih Signed-off-by: Bjørn Mork Signed-off-by: David S. Miller --- drivers/net/usb/cdc_ncm.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/usb/cdc_ncm.c b/drivers/net/usb/cdc_ncm.c index 549dbac710ed..9a2bd11943eb 100644 --- a/drivers/net/usb/cdc_ncm.c +++ b/drivers/net/usb/cdc_ncm.c @@ -785,7 +785,7 @@ cdc_ncm_fill_tx_frame(struct usbnet *dev, struct sk_buff *skb, __le32 sign) skb_out->len > CDC_NCM_MIN_TX_PKT) memset(skb_put(skb_out, ctx->tx_max - skb_out->len), 0, ctx->tx_max - skb_out->len); - else if ((skb_out->len % dev->maxpacket) == 0) + else if (skb_out->len < ctx->tx_max && (skb_out->len % dev->maxpacket) == 0) *skb_put(skb_out, 1) = 0; /* force short packet */ /* set final frame length */ -- cgit v1.2.1 From 36189cc3cd57ab0f1cd75241f93fe01de928ac06 Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Mon, 5 May 2014 09:36:43 -0700 Subject: Input: elantech - fix touchpad initialization on Gigabyte U2442 The hw_version 3 Elantech touchpad on the Gigabyte U2442 does not accept 0x0b as initialization value for r10, this stand-alone version of the driver: http://planet76.com/drivers/elantech/psmouse-elantech-v6.tar.bz2 Uses 0x03 which does work, so this means not setting bit 3 of r10 which sets: "Enable Real H/W Resolution In Absolute mode" Which will result in half the x and y resolution we get with that bit set, so simply not setting it everywhere is not a solution. We've been unable to find a way to identify touchpads where setting the bit will fail, so this patch uses a dmi based blacklist for this. https://bugzilla.kernel.org/show_bug.cgi?id=61151 Cc: stable@vger.kernel.org Reported-by: Philipp Wolfer Tested-by: Philipp Wolfer Signed-off-by: Hans de Goede Signed-off-by: Dmitry Torokhov --- drivers/input/mouse/elantech.c | 26 +++++++++++++++++++++++++- drivers/input/mouse/elantech.h | 1 + 2 files changed, 26 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/input/mouse/elantech.c b/drivers/input/mouse/elantech.c index 088d3541c7d3..b96e978a37b7 100644 --- a/drivers/input/mouse/elantech.c +++ b/drivers/input/mouse/elantech.c @@ -11,6 +11,7 @@ */ #include +#include #include #include #include @@ -831,7 +832,11 @@ static int elantech_set_absolute_mode(struct psmouse *psmouse) break; case 3: - etd->reg_10 = 0x0b; + if (etd->set_hw_resolution) + etd->reg_10 = 0x0b; + else + etd->reg_10 = 0x03; + if (elantech_write_reg(psmouse, 0x10, etd->reg_10)) rc = -1; @@ -1330,6 +1335,22 @@ static int elantech_reconnect(struct psmouse *psmouse) return 0; } +/* + * Some hw_version 3 models go into error state when we try to set bit 3 of r10 + */ +static const struct dmi_system_id no_hw_res_dmi_table[] = { +#if defined(CONFIG_DMI) && defined(CONFIG_X86) + { + /* Gigabyte U2442 */ + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "GIGABYTE"), + DMI_MATCH(DMI_PRODUCT_NAME, "U2442"), + }, + }, +#endif + { } +}; + /* * determine hardware version and set some properties according to it. */ @@ -1390,6 +1411,9 @@ static int elantech_set_properties(struct elantech_data *etd) */ etd->crc_enabled = ((etd->fw_version & 0x4000) == 0x4000); + /* Enable real hardware resolution on hw_version 3 ? */ + etd->set_hw_resolution = !dmi_check_system(no_hw_res_dmi_table); + return 0; } diff --git a/drivers/input/mouse/elantech.h b/drivers/input/mouse/elantech.h index 036a04abaef7..9e0e2a1f340d 100644 --- a/drivers/input/mouse/elantech.h +++ b/drivers/input/mouse/elantech.h @@ -130,6 +130,7 @@ struct elantech_data { bool jumpy_cursor; bool reports_pressure; bool crc_enabled; + bool set_hw_resolution; unsigned char hw_version; unsigned int fw_version; unsigned int single_finger_reports; -- cgit v1.2.1 From 531d9014d5c870fdf493e626c4b4e448273cb616 Mon Sep 17 00:00:00 2001 From: Jack Morgenstein Date: Sun, 4 May 2014 17:07:22 +0300 Subject: net/mlx4_core: Adjust port number in qp_attach wrapper when detaching When using single ported VFs and the VF is using port 2, we need to adjust the port accordingly (change it from 1 to 2). Fixes: 449fc48 ('net/mlx4: Adapt code for N-Port VF') Signed-off-by: Matan Barak Signed-off-by: Jack Morgenstein Signed-off-by: Or Gerlitz Signed-off-by: David S. Miller --- .../net/ethernet/mellanox/mlx4/resource_tracker.c | 23 ++++++++++++++++++++++ 1 file changed, 23 insertions(+) (limited to 'drivers') diff --git a/drivers/net/ethernet/mellanox/mlx4/resource_tracker.c b/drivers/net/ethernet/mellanox/mlx4/resource_tracker.c index 3b5f53ef29b2..1c3fdd4a1f7d 100644 --- a/drivers/net/ethernet/mellanox/mlx4/resource_tracker.c +++ b/drivers/net/ethernet/mellanox/mlx4/resource_tracker.c @@ -3733,6 +3733,25 @@ static int qp_detach(struct mlx4_dev *dev, struct mlx4_qp *qp, } } +static int mlx4_adjust_port(struct mlx4_dev *dev, int slave, + u8 *gid, enum mlx4_protocol prot) +{ + int real_port; + + if (prot != MLX4_PROT_ETH) + return 0; + + if (dev->caps.steering_mode == MLX4_STEERING_MODE_B0 || + dev->caps.steering_mode == MLX4_STEERING_MODE_DEVICE_MANAGED) { + real_port = mlx4_slave_convert_port(dev, slave, gid[5]); + if (real_port < 0) + return -EINVAL; + gid[5] = real_port; + } + + return 0; +} + int mlx4_QP_ATTACH_wrapper(struct mlx4_dev *dev, int slave, struct mlx4_vhcr *vhcr, struct mlx4_cmd_mailbox *inbox, @@ -3768,6 +3787,10 @@ int mlx4_QP_ATTACH_wrapper(struct mlx4_dev *dev, int slave, if (err) goto ex_detach; } else { + err = mlx4_adjust_port(dev, slave, gid, prot); + if (err) + goto ex_put; + err = rem_mcg_res(dev, slave, rqp, gid, prot, type, ®_id); if (err) goto ex_put; -- cgit v1.2.1 From 0254bc8205195c96b47abe33c67f8ccd2f2dad69 Mon Sep 17 00:00:00 2001 From: Matan Barak Date: Sun, 4 May 2014 17:07:23 +0300 Subject: net/mlx4_core: Fix slave id computation for single port VF The code that deals with computing the slave id based on a given GID gave wrong results when the number of single port VFs wasn't the same for port 1 vs. port 2 and the relevant VF is single ported on port 2. As a result, incoming CM MADs were dispatched to the wrong VF. Fixed that and added documentation to clarify the computation steps. Fixes: 449fc48 ('net/mlx4: Adapt code for N-Port VF') Signed-off-by: Matan Barak Signed-off-by: Or Gerlitz Signed-off-by: David S. Miller --- drivers/net/ethernet/mellanox/mlx4/port.c | 35 ++++++++++++++++++------------- 1 file changed, 20 insertions(+), 15 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/mellanox/mlx4/port.c b/drivers/net/ethernet/mellanox/mlx4/port.c index cfcad26ed40f..b5b3549b0c8d 100644 --- a/drivers/net/ethernet/mellanox/mlx4/port.c +++ b/drivers/net/ethernet/mellanox/mlx4/port.c @@ -1106,6 +1106,9 @@ int mlx4_get_slave_from_roce_gid(struct mlx4_dev *dev, int port, u8 *gid, } if (found_ix >= 0) { + /* Calculate a slave_gid which is the slave number in the gid + * table and not a globally unique slave number. + */ if (found_ix < MLX4_ROCE_PF_GIDS) slave_gid = 0; else if (found_ix < MLX4_ROCE_PF_GIDS + (vf_gids % num_vfs) * @@ -1118,41 +1121,43 @@ int mlx4_get_slave_from_roce_gid(struct mlx4_dev *dev, int port, u8 *gid, ((vf_gids % num_vfs) * ((vf_gids / num_vfs + 1)))) / (vf_gids / num_vfs)) + vf_gids % num_vfs + 1; + /* Calculate the globally unique slave id */ if (slave_gid) { struct mlx4_active_ports exclusive_ports; struct mlx4_active_ports actv_ports; struct mlx4_slaves_pport slaves_pport_actv; unsigned max_port_p_one; - int num_slaves_before = 1; + int num_vfs_before = 0; + int candidate_slave_gid; + /* Calculate how many VFs are on the previous port, if exists */ for (i = 1; i < port; i++) { bitmap_zero(exclusive_ports.ports, dev->caps.num_ports); - set_bit(i, exclusive_ports.ports); + set_bit(i - 1, exclusive_ports.ports); slaves_pport_actv = mlx4_phys_to_slaves_pport_actv( dev, &exclusive_ports); - num_slaves_before += bitmap_weight( + num_vfs_before += bitmap_weight( slaves_pport_actv.slaves, dev->num_vfs + 1); } - if (slave_gid < num_slaves_before) { - bitmap_zero(exclusive_ports.ports, dev->caps.num_ports); - set_bit(port - 1, exclusive_ports.ports); - slaves_pport_actv = - mlx4_phys_to_slaves_pport_actv( - dev, &exclusive_ports); - slave_gid += bitmap_weight( - slaves_pport_actv.slaves, - dev->num_vfs + 1) - - num_slaves_before; - } - actv_ports = mlx4_get_active_ports(dev, slave_gid); + /* candidate_slave_gid isn't necessarily the correct slave, but + * it has the same number of ports and is assigned to the same + * ports as the real slave we're looking for. On dual port VF, + * slave_gid = [single port VFs on port ] + + * [offset of the current slave from the first dual port VF] + + * 1 (for the PF). + */ + candidate_slave_gid = slave_gid + num_vfs_before; + + actv_ports = mlx4_get_active_ports(dev, candidate_slave_gid); max_port_p_one = find_first_bit( actv_ports.ports, dev->caps.num_ports) + bitmap_weight(actv_ports.ports, dev->caps.num_ports) + 1; + /* Calculate the real slave number */ for (i = 1; i < max_port_p_one; i++) { if (i == port) continue; -- cgit v1.2.1 From f24f790f8eb8bca00c66781b21de2a9ff7cd1c00 Mon Sep 17 00:00:00 2001 From: Or Gerlitz Date: Sun, 4 May 2014 17:07:24 +0300 Subject: net/mlx4_core: Load the Eth driver first When running in SRIOV mode, VM that is assigned with a non-provisioned Ethernet VFs get themselves a random mac when the Eth driver starts. In this case, if the IB driver startup code that deals with RoCE runs first, it will use a zero mac as the source mac for the Para-Virtual CM MADs which is buggy. To handle that, we change the order of loading. Signed-off-by: Or Gerlitz Signed-off-by: David S. Miller --- drivers/net/ethernet/mellanox/mlx4/main.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/mellanox/mlx4/main.c b/drivers/net/ethernet/mellanox/mlx4/main.c index cef267e24f9c..e98c15adb7e2 100644 --- a/drivers/net/ethernet/mellanox/mlx4/main.c +++ b/drivers/net/ethernet/mellanox/mlx4/main.c @@ -754,10 +754,10 @@ static void mlx4_request_modules(struct mlx4_dev *dev) has_eth_port = true; } - if (has_ib_port || (dev->caps.flags & MLX4_DEV_CAP_FLAG_IBOE)) - request_module_nowait(IB_DRV_NAME); if (has_eth_port) request_module_nowait(EN_DRV_NAME); + if (has_ib_port || (dev->caps.flags & MLX4_DEV_CAP_FLAG_IBOE)) + request_module_nowait(IB_DRV_NAME); } /* -- cgit v1.2.1 From 83d3459a5928f18c9344683e31bc2a7c3c25562a Mon Sep 17 00:00:00 2001 From: Eyal Perry Date: Sun, 4 May 2014 17:07:25 +0300 Subject: net/mlx4_core: Don't issue PCIe speed/width checks for VFs Carrying out PCI speed/width checks through pcie_get_minimum_link() on VFs yield wrong results, so remove them. Fixes: b912b2f ('net/mlx4_core: Warn if device doesn't have enough PCI bandwidth') Signed-off-by: Eyal Perry Signed-off-by: Or Gerlitz Signed-off-by: David S. Miller --- drivers/net/ethernet/mellanox/mlx4/main.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/mellanox/mlx4/main.c b/drivers/net/ethernet/mellanox/mlx4/main.c index e98c15adb7e2..7cf9dadcb471 100644 --- a/drivers/net/ethernet/mellanox/mlx4/main.c +++ b/drivers/net/ethernet/mellanox/mlx4/main.c @@ -2440,7 +2440,8 @@ slave_start: * No return code for this call, just warn the user in case of PCI * express device capabilities are under-satisfied by the bus. */ - mlx4_check_pcie_caps(dev); + if (!mlx4_is_slave(dev)) + mlx4_check_pcie_caps(dev); /* In master functions, the communication channel must be initialized * after obtaining its address from fw */ -- cgit v1.2.1 From 77e61146c67765deae45faa7db088c64a9fbca00 Mon Sep 17 00:00:00 2001 From: David Ertman Date: Tue, 22 Apr 2014 05:25:53 +0000 Subject: e1000e: Workaround for dropped packets in Gig/100 speeds on 82579 This is a workaround for a HW erratum on 82579 devices. Erratum is #23 in Intel 6 Series Chipset and Intel C200 Series Chipset specification Update June 2013. Problem: 82579 parts experience packet loss in Gig and 100 speeds when interconnect between PHY and MAC is exiting K1 power saving state. This was previously believed to only affect 1Gig speed, but has been observed at 100Mbs also. Workaround: Disable K1 for 82579 devices at Gig and 100 speeds. Signed-off-by: Dave Ertman Tested-by: Aaron Brown Signed-off-by: Jeff Kirsher --- drivers/net/ethernet/intel/e1000e/ich8lan.c | 31 +++++++++++------------------ drivers/net/ethernet/intel/e1000e/phy.h | 1 + 2 files changed, 13 insertions(+), 19 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/intel/e1000e/ich8lan.c b/drivers/net/ethernet/intel/e1000e/ich8lan.c index 9866f264f55e..9b736b8625ae 100644 --- a/drivers/net/ethernet/intel/e1000e/ich8lan.c +++ b/drivers/net/ethernet/intel/e1000e/ich8lan.c @@ -2493,51 +2493,44 @@ release: * e1000_k1_gig_workaround_lv - K1 Si workaround * @hw: pointer to the HW structure * - * Workaround to set the K1 beacon duration for 82579 parts + * Workaround to set the K1 beacon duration for 82579 parts in 10Mbps + * Disable K1 in 1000Mbps and 100Mbps **/ static s32 e1000_k1_workaround_lv(struct e1000_hw *hw) { s32 ret_val = 0; u16 status_reg = 0; - u32 mac_reg; - u16 phy_reg; if (hw->mac.type != e1000_pch2lan) return 0; - /* Set K1 beacon duration based on 1Gbps speed or otherwise */ + /* Set K1 beacon duration based on 10Mbs speed */ ret_val = e1e_rphy(hw, HV_M_STATUS, &status_reg); if (ret_val) return ret_val; if ((status_reg & (HV_M_STATUS_LINK_UP | HV_M_STATUS_AUTONEG_COMPLETE)) == (HV_M_STATUS_LINK_UP | HV_M_STATUS_AUTONEG_COMPLETE)) { - mac_reg = er32(FEXTNVM4); - mac_reg &= ~E1000_FEXTNVM4_BEACON_DURATION_MASK; - - ret_val = e1e_rphy(hw, I82579_LPI_CTRL, &phy_reg); - if (ret_val) - return ret_val; - - if (status_reg & HV_M_STATUS_SPEED_1000) { + if (status_reg & + (HV_M_STATUS_SPEED_1000 | HV_M_STATUS_SPEED_100)) { u16 pm_phy_reg; - mac_reg |= E1000_FEXTNVM4_BEACON_DURATION_8USEC; - phy_reg &= ~I82579_LPI_CTRL_FORCE_PLL_LOCK_COUNT; - /* LV 1G Packet drop issue wa */ + /* LV 1G/100 Packet drop issue wa */ ret_val = e1e_rphy(hw, HV_PM_CTRL, &pm_phy_reg); if (ret_val) return ret_val; - pm_phy_reg &= ~HV_PM_CTRL_PLL_STOP_IN_K1_GIGA; + pm_phy_reg &= ~HV_PM_CTRL_K1_ENABLE; ret_val = e1e_wphy(hw, HV_PM_CTRL, pm_phy_reg); if (ret_val) return ret_val; } else { + u32 mac_reg; + + mac_reg = er32(FEXTNVM4); + mac_reg &= ~E1000_FEXTNVM4_BEACON_DURATION_MASK; mac_reg |= E1000_FEXTNVM4_BEACON_DURATION_16USEC; - phy_reg |= I82579_LPI_CTRL_FORCE_PLL_LOCK_COUNT; + ew32(FEXTNVM4, mac_reg); } - ew32(FEXTNVM4, mac_reg); - ret_val = e1e_wphy(hw, I82579_LPI_CTRL, phy_reg); } return ret_val; diff --git a/drivers/net/ethernet/intel/e1000e/phy.h b/drivers/net/ethernet/intel/e1000e/phy.h index 3841bccf058c..537d2780b408 100644 --- a/drivers/net/ethernet/intel/e1000e/phy.h +++ b/drivers/net/ethernet/intel/e1000e/phy.h @@ -164,6 +164,7 @@ s32 e1000_get_cable_length_82577(struct e1000_hw *hw); #define HV_M_STATUS_AUTONEG_COMPLETE 0x1000 #define HV_M_STATUS_SPEED_MASK 0x0300 #define HV_M_STATUS_SPEED_1000 0x0200 +#define HV_M_STATUS_SPEED_100 0x0100 #define HV_M_STATUS_LINK_UP 0x0040 #define IGP01E1000_PHY_PCS_INIT_REG 0x00B4 -- cgit v1.2.1 From fbb9ab10a289ff28b70f53af302d119401960a39 Mon Sep 17 00:00:00 2001 From: David Ertman Date: Tue, 22 Apr 2014 05:48:54 +0000 Subject: e1000e: Expand workaround for 10Mb HD throughput bug In commit 772d05c51c4f4896c120ad418b1e91144a2ac813 "e1000e: slow performance between two 82579 connected via 10Mbit hub", a workaround was put into place to address the overaggressive transmit behavior of 82579 parts when connecting at 10Mbs half-duplex. This same behavior is seen on i217 and i218 parts as well. This patch expands the original workaround to encompass these parts. Signed-off-by: Dave Ertman Tested-by: Aaron Brown Signed-off-by: Jeff Kirsher --- drivers/net/ethernet/intel/e1000e/ich8lan.c | 15 +++++++++++---- drivers/net/ethernet/intel/e1000e/ich8lan.h | 1 + 2 files changed, 12 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/intel/e1000e/ich8lan.c b/drivers/net/ethernet/intel/e1000e/ich8lan.c index 9b736b8625ae..059f1b0112f4 100644 --- a/drivers/net/ethernet/intel/e1000e/ich8lan.c +++ b/drivers/net/ethernet/intel/e1000e/ich8lan.c @@ -1314,14 +1314,17 @@ static s32 e1000_check_for_copper_link_ich8lan(struct e1000_hw *hw) return ret_val; } - /* When connected at 10Mbps half-duplex, 82579 parts are excessively + /* When connected at 10Mbps half-duplex, some parts are excessively * aggressive resulting in many collisions. To avoid this, increase * the IPG and reduce Rx latency in the PHY. */ - if ((hw->mac.type == e1000_pch2lan) && link) { + if (((hw->mac.type == e1000_pch2lan) || + (hw->mac.type == e1000_pch_lpt)) && link) { u32 reg; reg = er32(STATUS); if (!(reg & (E1000_STATUS_FD | E1000_STATUS_SPEED_MASK))) { + u16 emi_addr; + reg = er32(TIPG); reg &= ~E1000_TIPG_IPGT_MASK; reg |= 0xFF; @@ -1332,8 +1335,12 @@ static s32 e1000_check_for_copper_link_ich8lan(struct e1000_hw *hw) if (ret_val) return ret_val; - ret_val = - e1000_write_emi_reg_locked(hw, I82579_RX_CONFIG, 0); + if (hw->mac.type == e1000_pch2lan) + emi_addr = I82579_RX_CONFIG; + else + emi_addr = I217_RX_CONFIG; + + ret_val = e1000_write_emi_reg_locked(hw, emi_addr, 0); hw->phy.ops.release(hw); diff --git a/drivers/net/ethernet/intel/e1000e/ich8lan.h b/drivers/net/ethernet/intel/e1000e/ich8lan.h index bead50f9187b..8fc6c15f31c8 100644 --- a/drivers/net/ethernet/intel/e1000e/ich8lan.h +++ b/drivers/net/ethernet/intel/e1000e/ich8lan.h @@ -242,6 +242,7 @@ #define I217_EEE_CAPABILITY 0x8000 /* IEEE MMD Register 3.20 */ #define I217_EEE_ADVERTISEMENT 0x8001 /* IEEE MMD Register 7.60 */ #define I217_EEE_LP_ABILITY 0x8002 /* IEEE MMD Register 7.61 */ +#define I217_RX_CONFIG 0xB20C /* Receive configuration */ #define E1000_EEE_RX_LPI_RCVD 0x0400 /* Tx LP idle received */ #define E1000_EEE_TX_LPI_RCVD 0x0800 /* Rx LP idle received */ -- cgit v1.2.1 From 7142a55c3c1fee89a60aa7b402c834b6b8afcb0a Mon Sep 17 00:00:00 2001 From: David Ertman Date: Thu, 1 May 2014 01:22:26 +0000 Subject: e1000e: Fix issue with link flap on 82579 Several customers have reported a link flap issue on 82579. The symptoms are random and intermittent link losses when 82579 is connected to specific link partners. Issue has been root caused as interoperability problem between 82579 and at least some Broadcom PHYs in the Energy Efficient Ethernet wake mechanism. To fix the issue, we are disabling the Phase Locked Loop shutdown in 100M Low Power Idle. This solution will cause an increase of power in 100M EEE link. It will cost additional 28mW in this specific mode. Cc: Lukasz Adamczuk Signed-off-by: Dave Ertman Tested-by: Aaron Brown Signed-off-by: Jeff Kirsher --- drivers/net/ethernet/intel/e1000e/ich8lan.c | 11 +++++++++++ drivers/net/ethernet/intel/e1000e/ich8lan.h | 2 ++ 2 files changed, 13 insertions(+) (limited to 'drivers') diff --git a/drivers/net/ethernet/intel/e1000e/ich8lan.c b/drivers/net/ethernet/intel/e1000e/ich8lan.c index 059f1b0112f4..e8587b94b138 100644 --- a/drivers/net/ethernet/intel/e1000e/ich8lan.c +++ b/drivers/net/ethernet/intel/e1000e/ich8lan.c @@ -842,6 +842,17 @@ s32 e1000_set_eee_pchlan(struct e1000_hw *hw) } } + if (hw->phy.type == e1000_phy_82579) { + ret_val = e1000_read_emi_reg_locked(hw, I82579_LPI_PLL_SHUT, + &data); + if (ret_val) + goto release; + + data &= ~I82579_LPI_100_PLL_SHUT; + ret_val = e1000_write_emi_reg_locked(hw, I82579_LPI_PLL_SHUT, + data); + } + /* R/Clr IEEE MMD 3.1 bits 11:10 - Tx/Rx LPI Received */ ret_val = e1000_read_emi_reg_locked(hw, pcs_status, &data); if (ret_val) diff --git a/drivers/net/ethernet/intel/e1000e/ich8lan.h b/drivers/net/ethernet/intel/e1000e/ich8lan.h index 8fc6c15f31c8..5515126c81c1 100644 --- a/drivers/net/ethernet/intel/e1000e/ich8lan.h +++ b/drivers/net/ethernet/intel/e1000e/ich8lan.h @@ -232,12 +232,14 @@ #define I82577_MSE_THRESHOLD 0x0887 /* 82577 Mean Square Error Threshold */ #define I82579_MSE_LINK_DOWN 0x2411 /* MSE count before dropping link */ #define I82579_RX_CONFIG 0x3412 /* Receive configuration */ +#define I82579_LPI_PLL_SHUT 0x4412 /* LPI PLL Shut Enable */ #define I82579_EEE_PCS_STATUS 0x182E /* IEEE MMD Register 3.1 >> 8 */ #define I82579_EEE_CAPABILITY 0x0410 /* IEEE MMD Register 3.20 */ #define I82579_EEE_ADVERTISEMENT 0x040E /* IEEE MMD Register 7.60 */ #define I82579_EEE_LP_ABILITY 0x040F /* IEEE MMD Register 7.61 */ #define I82579_EEE_100_SUPPORTED (1 << 1) /* 100BaseTx EEE */ #define I82579_EEE_1000_SUPPORTED (1 << 2) /* 1000BaseTx EEE */ +#define I82579_LPI_100_PLL_SHUT (1 << 2) /* 100M LPI PLL Shut Enabled */ #define I217_EEE_PCS_STATUS 0x9401 /* IEEE MMD Register 3.1 */ #define I217_EEE_CAPABILITY 0x8000 /* IEEE MMD Register 3.20 */ #define I217_EEE_ADVERTISEMENT 0x8001 /* IEEE MMD Register 7.60 */ -- cgit v1.2.1 From 2c9826243bebeb90a57a7946d4144a2a9a43dc39 Mon Sep 17 00:00:00 2001 From: David Ertman Date: Thu, 1 May 2014 02:19:03 +0000 Subject: e1000e: Restrict MDIO Slow Mode workaround to relevant parts It has been determined that the workaround of putting the PHY into MDIO slow mode to access the PHY id is not necessary with Lynx Point and newer parts. The issue that necessitated the workaround has been fixed on the newer hardware. We will maintains, as a last ditch attempt, the conversion to MDIO Slow Mode in the failure branch when attempting to access the PHY id so as to cover all contingencies. Signed-off-by: Dave Ertman Tested-by: Aaron Brown Signed-off-by: Jeff Kirsher --- drivers/net/ethernet/intel/e1000e/ich8lan.c | 14 ++++++++------ 1 file changed, 8 insertions(+), 6 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/intel/e1000e/ich8lan.c b/drivers/net/ethernet/intel/e1000e/ich8lan.c index e8587b94b138..f0bbd4246d71 100644 --- a/drivers/net/ethernet/intel/e1000e/ich8lan.c +++ b/drivers/net/ethernet/intel/e1000e/ich8lan.c @@ -186,7 +186,7 @@ static bool e1000_phy_is_accessible_pchlan(struct e1000_hw *hw) { u16 phy_reg = 0; u32 phy_id = 0; - s32 ret_val; + s32 ret_val = 0; u16 retry_count; u32 mac_reg = 0; @@ -217,11 +217,13 @@ static bool e1000_phy_is_accessible_pchlan(struct e1000_hw *hw) /* In case the PHY needs to be in mdio slow mode, * set slow mode and try to get the PHY id again. */ - hw->phy.ops.release(hw); - ret_val = e1000_set_mdio_slow_mode_hv(hw); - if (!ret_val) - ret_val = e1000e_get_phy_id(hw); - hw->phy.ops.acquire(hw); + if (hw->mac.type < e1000_pch_lpt) { + hw->phy.ops.release(hw); + ret_val = e1000_set_mdio_slow_mode_hv(hw); + if (!ret_val) + ret_val = e1000e_get_phy_id(hw); + hw->phy.ops.acquire(hw); + } if (ret_val) return false; -- cgit v1.2.1 From ccd6d0a9104e9075e57fa539ed6bb622b15284d9 Mon Sep 17 00:00:00 2001 From: Soren Brinkmann Date: Sun, 4 May 2014 15:42:58 -0700 Subject: net: macb: Pass same size to DMA_UNMAP as used for DMA_MAP Just as commit "net: macb: DMA-unmap full rx-buffer" (48330e08fa168395b9fd9f369f06cca1df204361), pass the size that was used for mapping the memory also to the unmap routine to avoid warnings from the DMA_API. Signed-off-by: Soren Brinkmann Signed-off-by: David S. Miller --- drivers/net/ethernet/cadence/macb.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/cadence/macb.c b/drivers/net/ethernet/cadence/macb.c index ca97005e24b4..18fdcd9d51b3 100644 --- a/drivers/net/ethernet/cadence/macb.c +++ b/drivers/net/ethernet/cadence/macb.c @@ -1113,7 +1113,7 @@ static void gem_free_rx_buffers(struct macb *bp) desc = &bp->rx_ring[i]; addr = MACB_BF(RX_WADDR, MACB_BFEXT(RX_WADDR, desc->addr)); - dma_unmap_single(&bp->pdev->dev, addr, skb->len, + dma_unmap_single(&bp->pdev->dev, addr, bp->rx_buffer_size, DMA_FROM_DEVICE); dev_kfree_skb_any(skb); skb = NULL; -- cgit v1.2.1 From 6a027b705fb6d2214647a638b44ea91ee6ce7e4c Mon Sep 17 00:00:00 2001 From: Soren Brinkmann Date: Sun, 4 May 2014 15:42:59 -0700 Subject: net: macb: Clear interrupt flags A few interrupt flags were not cleared in the ISR, resulting in a sytem trapped in the ISR in cases one of those interrupts occurred. Clear all flags to avoid such situations. Signed-off-by: Soren Brinkmann Signed-off-by: David S. Miller --- drivers/net/ethernet/cadence/macb.c | 10 ++++++++++ 1 file changed, 10 insertions(+) (limited to 'drivers') diff --git a/drivers/net/ethernet/cadence/macb.c b/drivers/net/ethernet/cadence/macb.c index 18fdcd9d51b3..e38fe39d9589 100644 --- a/drivers/net/ethernet/cadence/macb.c +++ b/drivers/net/ethernet/cadence/macb.c @@ -951,6 +951,10 @@ static irqreturn_t macb_interrupt(int irq, void *dev_id) if (unlikely(status & (MACB_TX_ERR_FLAGS))) { macb_writel(bp, IDR, MACB_TX_INT_FLAGS); schedule_work(&bp->tx_error_task); + + if (bp->caps & MACB_CAPS_ISR_CLEAR_ON_WRITE) + macb_writel(bp, ISR, MACB_TX_ERR_FLAGS); + break; } @@ -968,6 +972,9 @@ static irqreturn_t macb_interrupt(int irq, void *dev_id) bp->hw_stats.gem.rx_overruns++; else bp->hw_stats.macb.rx_overruns++; + + if (bp->caps & MACB_CAPS_ISR_CLEAR_ON_WRITE) + macb_writel(bp, ISR, MACB_BIT(ISR_ROVR)); } if (status & MACB_BIT(HRESP)) { @@ -977,6 +984,9 @@ static irqreturn_t macb_interrupt(int irq, void *dev_id) * (work queue?) */ netdev_err(dev, "DMA bus error: HRESP not OK\n"); + + if (bp->caps & MACB_CAPS_ISR_CLEAR_ON_WRITE) + macb_writel(bp, ISR, MACB_BIT(HRESP)); } status = macb_readl(bp, ISR); -- cgit v1.2.1 From 02f7a34f34e30ee6fd02e01201ae130003e516ab Mon Sep 17 00:00:00 2001 From: Soren Brinkmann Date: Sun, 4 May 2014 15:43:00 -0700 Subject: net: macb: Re-enable RX interrupt only when RX is done When data is received during the driver processing received data the NAPI is re-scheduled. In that case the RX interrupt should not be re-enabled. Signed-off-by: Soren Brinkmann Signed-off-by: David S. Miller --- drivers/net/ethernet/cadence/macb.c | 13 ++++++------- 1 file changed, 6 insertions(+), 7 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/cadence/macb.c b/drivers/net/ethernet/cadence/macb.c index e38fe39d9589..3f4b8ee0b0e7 100644 --- a/drivers/net/ethernet/cadence/macb.c +++ b/drivers/net/ethernet/cadence/macb.c @@ -891,16 +891,15 @@ static int macb_poll(struct napi_struct *napi, int budget) if (work_done < budget) { napi_complete(napi); - /* - * We've done what we can to clean the buffers. Make sure we - * get notified when new packets arrive. - */ - macb_writel(bp, IER, MACB_RX_INT_FLAGS); - /* Packets received while interrupts were disabled */ status = macb_readl(bp, RSR); - if (unlikely(status)) + if (unlikely(status)) { + if (bp->caps & MACB_CAPS_ISR_CLEAR_ON_WRITE) + macb_writel(bp, ISR, MACB_BIT(RCOMP)); napi_reschedule(napi); + } else { + macb_writel(bp, IER, MACB_RX_INT_FLAGS); + } } /* TODO: Handle errors */ -- cgit v1.2.1 From 504ad98df3a6b027ce997ca8f620e949cafb151f Mon Sep 17 00:00:00 2001 From: Soren Brinkmann Date: Sun, 4 May 2014 15:43:01 -0700 Subject: net: macb: Remove 'unlikely' optimization Coverage data suggests that the unlikely case of receiving data while the receive handler is running may not be that unlikely. Coverage data after running iperf for a while: 91320: 891: work_done = bp->macbgem_ops.mog_rx(bp, budget); 91320: 892: if (work_done < budget) { 2362: 893: napi_complete(napi); -: 894: -: 895: /* Packets received while interrupts were disabled */ 4724: 896: status = macb_readl(bp, RSR); 2362: 897: if (unlikely(status)) { 762: 898: if (bp->caps & MACB_CAPS_ISR_CLEAR_ON_WRITE) 762: 899: macb_writel(bp, ISR, MACB_BIT(RCOMP)); -: 900: napi_reschedule(napi); -: 901: } else { 1600: 902: macb_writel(bp, IER, MACB_RX_INT_FLAGS); -: 903: } -: 904: } Signed-off-by: Soren Brinkmann Signed-off-by: David S. Miller --- drivers/net/ethernet/cadence/macb.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/cadence/macb.c b/drivers/net/ethernet/cadence/macb.c index 3f4b8ee0b0e7..3e13aa31548a 100644 --- a/drivers/net/ethernet/cadence/macb.c +++ b/drivers/net/ethernet/cadence/macb.c @@ -893,7 +893,7 @@ static int macb_poll(struct napi_struct *napi, int budget) /* Packets received while interrupts were disabled */ status = macb_readl(bp, RSR); - if (unlikely(status)) { + if (status) { if (bp->caps & MACB_CAPS_ISR_CLEAR_ON_WRITE) macb_writel(bp, ISR, MACB_BIT(RCOMP)); napi_reschedule(napi); -- cgit v1.2.1 From c8ea5a22bd3b27d68ec2f95483ce8bfe7f114933 Mon Sep 17 00:00:00 2001 From: Soren Brinkmann Date: Sun, 4 May 2014 15:43:02 -0700 Subject: net: macb: Fix race between HW and driver Under "heavy" RX load, the driver cannot handle the descriptors fast enough. In detail, when a descriptor is consumed, its used flag is cleared and once the RX budget is consumed all descriptors with a cleared used flag are prepared to receive more data. Under load though, the HW may constantly receive more data and use those descriptors with a cleared used flag before they are actually prepared for next usage. The head and tail pointers into the RX-ring should always be valid and we can omit clearing and checking of the used flag. Signed-off-by: Soren Brinkmann Signed-off-by: David S. Miller --- drivers/net/ethernet/cadence/macb.c | 10 ---------- 1 file changed, 10 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/cadence/macb.c b/drivers/net/ethernet/cadence/macb.c index 3e13aa31548a..e9daa072ebb4 100644 --- a/drivers/net/ethernet/cadence/macb.c +++ b/drivers/net/ethernet/cadence/macb.c @@ -599,25 +599,16 @@ static void gem_rx_refill(struct macb *bp) { unsigned int entry; struct sk_buff *skb; - struct macb_dma_desc *desc; dma_addr_t paddr; while (CIRC_SPACE(bp->rx_prepared_head, bp->rx_tail, RX_RING_SIZE) > 0) { - u32 addr, ctrl; - entry = macb_rx_ring_wrap(bp->rx_prepared_head); - desc = &bp->rx_ring[entry]; /* Make hw descriptor updates visible to CPU */ rmb(); - addr = desc->addr; - ctrl = desc->ctrl; bp->rx_prepared_head++; - if ((addr & MACB_BIT(RX_USED))) - continue; - if (bp->rx_skbuff[entry] == NULL) { /* allocate sk_buff for this free entry in ring */ skb = netdev_alloc_skb(bp->dev, bp->rx_buffer_size); @@ -698,7 +689,6 @@ static int gem_rx(struct macb *bp, int budget) if (!(addr & MACB_BIT(RX_USED))) break; - desc->addr &= ~MACB_BIT(RX_USED); bp->rx_tail++; count++; -- cgit v1.2.1 From 825747bb85634a2a7b7dce4e373831e211ab1644 Mon Sep 17 00:00:00 2001 From: "Peter F. Patel-Schneider" Date: Mon, 5 May 2014 15:55:32 -0700 Subject: HID: sensor-hub: Add in quirk for sensor hub in Lenovo Ideapad Yogas The sensor hub in Lenovo Yogas needs the enumeration quirk. I've been running the patch for over a month with no problems, whereas the unpatched drivers reliably mis-initialized the sensors. Signed-off-by: Peter F. Patel-Schneider Acked-by: Srinivas Pandruvada Signed-off-by: Jiri Kosina --- drivers/hid/hid-ids.h | 3 +++ drivers/hid/hid-sensor-hub.c | 3 +++ 2 files changed, 6 insertions(+) (limited to 'drivers') diff --git a/drivers/hid/hid-ids.h b/drivers/hid/hid-ids.h index 5c75774cdaf2..34bb2205d2ea 100644 --- a/drivers/hid/hid-ids.h +++ b/drivers/hid/hid-ids.h @@ -839,6 +839,9 @@ #define USB_DEVICE_ID_SYNAPTICS_QUAD_HD 0x1ac3 #define USB_DEVICE_ID_SYNAPTICS_TP_V103 0x5710 +#define USB_VENDOR_ID_TEXAS_INSTRUMENTS 0x2047 +#define USB_DEVICE_ID_TEXAS_INSTRUMENTS_LENOVO_YOGA 0x0855 + #define USB_VENDOR_ID_THINGM 0x27b8 #define USB_DEVICE_ID_BLINK1 0x01ed diff --git a/drivers/hid/hid-sensor-hub.c b/drivers/hid/hid-sensor-hub.c index af8244b1c1f4..be14b5690e94 100644 --- a/drivers/hid/hid-sensor-hub.c +++ b/drivers/hid/hid-sensor-hub.c @@ -708,6 +708,9 @@ static const struct hid_device_id sensor_hub_devices[] = { { HID_DEVICE(HID_BUS_ANY, HID_GROUP_SENSOR_HUB, USB_VENDOR_ID_STM_0, USB_DEVICE_ID_STM_HID_SENSOR), .driver_data = HID_SENSOR_HUB_ENUM_QUIRK}, + { HID_DEVICE(HID_BUS_ANY, HID_GROUP_SENSOR_HUB, USB_VENDOR_ID_TEXAS_INSTRUMENTS, + USB_DEVICE_ID_TEXAS_INSTRUMENTS_LENOVO_YOGA), + .driver_data = HID_SENSOR_HUB_ENUM_QUIRK}, { HID_DEVICE(HID_BUS_ANY, HID_GROUP_SENSOR_HUB, HID_ANY_ID, HID_ANY_ID) }, { } -- cgit v1.2.1 From 722a9f9299ca720a3f14660e7c0dce7b76a9cb42 Mon Sep 17 00:00:00 2001 From: Andi Kleen Date: Fri, 2 May 2014 00:44:38 +0200 Subject: asmlinkage: Add explicit __visible to drivers/*, lib/*, kernel/* As requested by Linus add explicit __visible to the asmlinkage users. This marks functions visible to assembler. Tree sweep for rest of tree. Signed-off-by: Andi Kleen Link: http://lkml.kernel.org/r/1398984278-29319-4-git-send-email-andi@firstfloor.org Signed-off-by: H. Peter Anvin --- drivers/pnp/pnpbios/bioscalls.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/pnp/pnpbios/bioscalls.c b/drivers/pnp/pnpbios/bioscalls.c index deb7f4bcdb7b..438d4c72c7b3 100644 --- a/drivers/pnp/pnpbios/bioscalls.c +++ b/drivers/pnp/pnpbios/bioscalls.c @@ -37,7 +37,7 @@ __visible struct { * kernel begins at offset 3GB... */ -asmlinkage void pnp_bios_callfunc(void); +asmlinkage __visible void pnp_bios_callfunc(void); __asm__(".text \n" __ALIGN_STR "\n" -- cgit v1.2.1 From d48dc067450d84324067f4472dc0b169e9af4454 Mon Sep 17 00:00:00 2001 From: Lv Zheng Date: Wed, 30 Apr 2014 10:05:40 +0800 Subject: ACPICA: Tables: Fix invalid pointer accesses in acpi_tb_parse_root_table(). Linux XSDT validation mechanism backport has introduced a regreession: Commit: 671cc68dc61f029d44b43a681356078e02d8dab8 Subject: ACPICA: Back port and refine validation of the XSDT root table. There is a pointer still accessed after unmapping. This patch fixes this issue. Lv Zheng. Fixes: 671cc68dc61f (ACPICA: Back port and refine validation of the XSDT root table.) References: https://bugzilla.kernel.org/show_bug.cgi?id=73911 References: https://bugs.archlinux.org/task/39811 Signed-off-by: Lv Zheng Reported-and-tested-by: Bruce Chiarelli Reported-and-tested-by: Spyros Stathopoulos Signed-off-by: Bob Moore Cc: 3.14+ # 3.14+ Signed-off-by: Rafael J. Wysocki --- drivers/acpi/acpica/tbutils.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/acpi/acpica/tbutils.c b/drivers/acpi/acpica/tbutils.c index a4702eee91a8..9fb85f38de90 100644 --- a/drivers/acpi/acpica/tbutils.c +++ b/drivers/acpi/acpica/tbutils.c @@ -461,6 +461,7 @@ acpi_status __init acpi_tb_parse_root_table(acpi_physical_address rsdp_address) u32 table_count; struct acpi_table_header *table; acpi_physical_address address; + acpi_physical_address rsdt_address; u32 length; u8 *table_entry; acpi_status status; @@ -488,11 +489,14 @@ acpi_status __init acpi_tb_parse_root_table(acpi_physical_address rsdp_address) * as per the ACPI specification. */ address = (acpi_physical_address) rsdp->xsdt_physical_address; + rsdt_address = + (acpi_physical_address) rsdp->rsdt_physical_address; table_entry_size = ACPI_XSDT_ENTRY_SIZE; } else { /* Root table is an RSDT (32-bit physical addresses) */ address = (acpi_physical_address) rsdp->rsdt_physical_address; + rsdt_address = address; table_entry_size = ACPI_RSDT_ENTRY_SIZE; } @@ -515,8 +519,7 @@ acpi_status __init acpi_tb_parse_root_table(acpi_physical_address rsdp_address) /* Fall back to the RSDT */ - address = - (acpi_physical_address) rsdp->rsdt_physical_address; + address = rsdt_address; table_entry_size = ACPI_RSDT_ENTRY_SIZE; } } -- cgit v1.2.1 From cc13b1d1500656a20e41960668f3392dda9fa6e2 Mon Sep 17 00:00:00 2001 From: NeilBrown Date: Mon, 5 May 2014 13:34:37 +1000 Subject: md/raid10: call wait_barrier() for each request submitted. wait_barrier() includes a counter, so we must call it precisely once (unless balanced by allow_barrier()) for each request submitted. Since commit 20d0189b1012a37d2533a87fb451f7852f2418d1 block: Introduce new bio_split() in 3.14-rc1, we don't call it for the extra requests generated when we need to split a bio. When this happens the counter goes negative, any resync/recovery will never start, and "mdadm --stop" will hang. Reported-by: Chris Murphy Fixes: 20d0189b1012a37d2533a87fb451f7852f2418d1 Cc: stable@vger.kernel.org (3.14+) Cc: Kent Overstreet Signed-off-by: NeilBrown --- drivers/md/raid10.c | 13 +++++++------ 1 file changed, 7 insertions(+), 6 deletions(-) (limited to 'drivers') diff --git a/drivers/md/raid10.c b/drivers/md/raid10.c index 33fc408e5eac..cb882aae9e20 100644 --- a/drivers/md/raid10.c +++ b/drivers/md/raid10.c @@ -1172,6 +1172,13 @@ static void __make_request(struct mddev *mddev, struct bio *bio) int max_sectors; int sectors; + /* + * Register the new request and wait if the reconstruction + * thread has put up a bar for new requests. + * Continue immediately if no resync is active currently. + */ + wait_barrier(conf); + sectors = bio_sectors(bio); while (test_bit(MD_RECOVERY_RESHAPE, &mddev->recovery) && bio->bi_iter.bi_sector < conf->reshape_progress && @@ -1552,12 +1559,6 @@ static void make_request(struct mddev *mddev, struct bio *bio) md_write_start(mddev, bio); - /* - * Register the new request and wait if the reconstruction - * thread has put up a bar for new requests. - * Continue immediately if no resync is active currently. - */ - wait_barrier(conf); do { -- cgit v1.2.1 From 0f62fb220aa4ebabe8547d3a9ce4a16d3c045f21 Mon Sep 17 00:00:00 2001 From: NeilBrown Date: Tue, 6 May 2014 09:36:08 +1000 Subject: md: avoid possible spinning md thread at shutdown. If an md array with externally managed metadata (e.g. DDF or IMSM) is in use, then we should not set safemode==2 at shutdown because: 1/ this is ineffective: user-space need to be involved in any 'safemode' handling, 2/ The safemode management code doesn't cope with safemode==2 on external metadata and md_check_recover enters an infinite loop. Even at shutdown, an infinite-looping process can be problematic, so this could cause shutdown to hang. Cc: stable@vger.kernel.org (any kernel) Signed-off-by: NeilBrown --- drivers/md/md.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/md/md.c b/drivers/md/md.c index 8fda38d23e38..237b7e0ddc7a 100644 --- a/drivers/md/md.c +++ b/drivers/md/md.c @@ -8516,7 +8516,8 @@ static int md_notify_reboot(struct notifier_block *this, if (mddev_trylock(mddev)) { if (mddev->pers) __md_stop_writes(mddev); - mddev->safemode = 2; + if (mddev->persistent) + mddev->safemode = 2; mddev_unlock(mddev); } need_delay = 1; -- cgit v1.2.1 From e2a7c3d7812369daae56f069eab2e8f3e548d231 Mon Sep 17 00:00:00 2001 From: Lan Tianyu Date: Sun, 4 May 2014 11:07:24 +0800 Subject: ACPI: Revert "ACPI: Remove CONFIG_ACPI_PROCFS_POWER and cm_sbsc.c" The commit 1e2d9cd and 7d7ee95 remove ACPI Proc Battery directory and breaks some old userspace tools. This patch is to revert 7d7ee95. Fixes: 7d7ee958867a (ACPI: Remove CONFIG_ACPI_PROCFS_POWER and cm_sbsc.c) Cc: 3.13+ # 3.13+ Signed-off-by: Lan Tianyu Signed-off-by: Rafael J. Wysocki --- drivers/acpi/Kconfig | 17 ++++++++ drivers/acpi/Makefile | 1 + drivers/acpi/cm_sbs.c | 105 ++++++++++++++++++++++++++++++++++++++++++++++++++ 3 files changed, 123 insertions(+) create mode 100644 drivers/acpi/cm_sbs.c (limited to 'drivers') diff --git a/drivers/acpi/Kconfig b/drivers/acpi/Kconfig index ab686b310100..c0160bb451e9 100644 --- a/drivers/acpi/Kconfig +++ b/drivers/acpi/Kconfig @@ -47,6 +47,23 @@ config ACPI_SLEEP depends on SUSPEND || HIBERNATION default y +config ACPI_PROCFS_POWER + bool "Deprecated power /proc/acpi directories" + depends on PROC_FS + help + For backwards compatibility, this option allows + deprecated power /proc/acpi/ directories to exist, even when + they have been replaced by functions in /sys. + The deprecated directories (and their replacements) include: + /proc/acpi/battery/* (/sys/class/power_supply/*) + /proc/acpi/ac_adapter/* (sys/class/power_supply/*) + This option has no effect on /proc/acpi/ directories + and functions, which do not yet exist in /sys + This option, together with the proc directories, will be + deleted in 2.6.39. + + Say N to delete power /proc/acpi/ directories that have moved to /sys/ + config ACPI_EC_DEBUGFS tristate "EC read/write access through /sys/kernel/debug/ec" default n diff --git a/drivers/acpi/Makefile b/drivers/acpi/Makefile index 0331f91d56e6..bce34afadcd0 100644 --- a/drivers/acpi/Makefile +++ b/drivers/acpi/Makefile @@ -47,6 +47,7 @@ acpi-y += sysfs.o acpi-$(CONFIG_X86) += acpi_cmos_rtc.o acpi-$(CONFIG_DEBUG_FS) += debugfs.o acpi-$(CONFIG_ACPI_NUMA) += numa.o +acpi-$(CONFIG_ACPI_PROCFS_POWER) += cm_sbs.o ifdef CONFIG_ACPI_VIDEO acpi-y += video_detect.o endif diff --git a/drivers/acpi/cm_sbs.c b/drivers/acpi/cm_sbs.c new file mode 100644 index 000000000000..6c9ee68e46fb --- /dev/null +++ b/drivers/acpi/cm_sbs.c @@ -0,0 +1,105 @@ +/* + * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or (at + * your option) any later version. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA. + * + * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define PREFIX "ACPI: " + +ACPI_MODULE_NAME("cm_sbs"); +#define ACPI_AC_CLASS "ac_adapter" +#define ACPI_BATTERY_CLASS "battery" +#define _COMPONENT ACPI_SBS_COMPONENT +static struct proc_dir_entry *acpi_ac_dir; +static struct proc_dir_entry *acpi_battery_dir; + +static DEFINE_MUTEX(cm_sbs_mutex); + +static int lock_ac_dir_cnt; +static int lock_battery_dir_cnt; + +struct proc_dir_entry *acpi_lock_ac_dir(void) +{ + mutex_lock(&cm_sbs_mutex); + if (!acpi_ac_dir) + acpi_ac_dir = proc_mkdir(ACPI_AC_CLASS, acpi_root_dir); + if (acpi_ac_dir) { + lock_ac_dir_cnt++; + } else { + printk(KERN_ERR PREFIX + "Cannot create %s\n", ACPI_AC_CLASS); + } + mutex_unlock(&cm_sbs_mutex); + return acpi_ac_dir; +} +EXPORT_SYMBOL(acpi_lock_ac_dir); + +void acpi_unlock_ac_dir(struct proc_dir_entry *acpi_ac_dir_param) +{ + mutex_lock(&cm_sbs_mutex); + if (acpi_ac_dir_param) + lock_ac_dir_cnt--; + if (lock_ac_dir_cnt == 0 && acpi_ac_dir_param && acpi_ac_dir) { + remove_proc_entry(ACPI_AC_CLASS, acpi_root_dir); + acpi_ac_dir = NULL; + } + mutex_unlock(&cm_sbs_mutex); +} +EXPORT_SYMBOL(acpi_unlock_ac_dir); + +struct proc_dir_entry *acpi_lock_battery_dir(void) +{ + mutex_lock(&cm_sbs_mutex); + if (!acpi_battery_dir) { + acpi_battery_dir = + proc_mkdir(ACPI_BATTERY_CLASS, acpi_root_dir); + } + if (acpi_battery_dir) { + lock_battery_dir_cnt++; + } else { + printk(KERN_ERR PREFIX + "Cannot create %s\n", ACPI_BATTERY_CLASS); + } + mutex_unlock(&cm_sbs_mutex); + return acpi_battery_dir; +} +EXPORT_SYMBOL(acpi_lock_battery_dir); + +void acpi_unlock_battery_dir(struct proc_dir_entry *acpi_battery_dir_param) +{ + mutex_lock(&cm_sbs_mutex); + if (acpi_battery_dir_param) + lock_battery_dir_cnt--; + if (lock_battery_dir_cnt == 0 && acpi_battery_dir_param + && acpi_battery_dir) { + remove_proc_entry(ACPI_BATTERY_CLASS, acpi_root_dir); + acpi_battery_dir = NULL; + } + mutex_unlock(&cm_sbs_mutex); + return; +} +EXPORT_SYMBOL(acpi_unlock_battery_dir); -- cgit v1.2.1 From 3a670cc79342c36d308decd5f90351830ed1685c Mon Sep 17 00:00:00 2001 From: Lan Tianyu Date: Sun, 4 May 2014 11:07:25 +0800 Subject: ACPI: Revert "ACPI / Battery: Remove battery's proc directory" The commit 1e2d9cd and 7d7ee95 remove ACPI Proc Battery directory and breaks some old userspace tools. This patch is to revert commit 1e2d9cd. Fixes: 1e2d9cdfb449 (ACPI / Battery: Remove battery's proc directory) Cc: 3.13+ # 3.13+ Signed-off-by: Lan Tianyu Signed-off-by: Rafael J. Wysocki --- drivers/acpi/battery.c | 329 ++++++++++++++++++++++++++++++++++++++++++++++++- 1 file changed, 328 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/acpi/battery.c b/drivers/acpi/battery.c index 9a2c63b20050..6e7b2a12860d 100644 --- a/drivers/acpi/battery.c +++ b/drivers/acpi/battery.c @@ -36,6 +36,12 @@ #include #include +#ifdef CONFIG_ACPI_PROCFS_POWER +#include +#include +#include +#endif + #include #include @@ -64,6 +70,19 @@ static unsigned int cache_time = 1000; module_param(cache_time, uint, 0644); MODULE_PARM_DESC(cache_time, "cache time in milliseconds"); +#ifdef CONFIG_ACPI_PROCFS_POWER +extern struct proc_dir_entry *acpi_lock_battery_dir(void); +extern void *acpi_unlock_battery_dir(struct proc_dir_entry *acpi_battery_dir); + +enum acpi_battery_files { + info_tag = 0, + state_tag, + alarm_tag, + ACPI_BATTERY_NUMFILES, +}; + +#endif + static const struct acpi_device_id battery_device_ids[] = { {"PNP0C0A", 0}, {"", 0}, @@ -299,6 +318,14 @@ static enum power_supply_property energy_battery_props[] = { POWER_SUPPLY_PROP_SERIAL_NUMBER, }; +#ifdef CONFIG_ACPI_PROCFS_POWER +inline char *acpi_battery_units(struct acpi_battery *battery) +{ + return (battery->power_unit == ACPI_BATTERY_POWER_UNIT_MA) ? + "mA" : "mW"; +} +#endif + /* -------------------------------------------------------------------------- Battery Management -------------------------------------------------------------------------- */ @@ -716,6 +743,279 @@ static void acpi_battery_refresh(struct acpi_battery *battery) sysfs_add_battery(battery); } +/* -------------------------------------------------------------------------- + FS Interface (/proc) + -------------------------------------------------------------------------- */ + +#ifdef CONFIG_ACPI_PROCFS_POWER +static struct proc_dir_entry *acpi_battery_dir; + +static int acpi_battery_print_info(struct seq_file *seq, int result) +{ + struct acpi_battery *battery = seq->private; + + if (result) + goto end; + + seq_printf(seq, "present: %s\n", + acpi_battery_present(battery) ? "yes" : "no"); + if (!acpi_battery_present(battery)) + goto end; + if (battery->design_capacity == ACPI_BATTERY_VALUE_UNKNOWN) + seq_printf(seq, "design capacity: unknown\n"); + else + seq_printf(seq, "design capacity: %d %sh\n", + battery->design_capacity, + acpi_battery_units(battery)); + + if (battery->full_charge_capacity == ACPI_BATTERY_VALUE_UNKNOWN) + seq_printf(seq, "last full capacity: unknown\n"); + else + seq_printf(seq, "last full capacity: %d %sh\n", + battery->full_charge_capacity, + acpi_battery_units(battery)); + + seq_printf(seq, "battery technology: %srechargeable\n", + (!battery->technology)?"non-":""); + + if (battery->design_voltage == ACPI_BATTERY_VALUE_UNKNOWN) + seq_printf(seq, "design voltage: unknown\n"); + else + seq_printf(seq, "design voltage: %d mV\n", + battery->design_voltage); + seq_printf(seq, "design capacity warning: %d %sh\n", + battery->design_capacity_warning, + acpi_battery_units(battery)); + seq_printf(seq, "design capacity low: %d %sh\n", + battery->design_capacity_low, + acpi_battery_units(battery)); + seq_printf(seq, "cycle count: %i\n", battery->cycle_count); + seq_printf(seq, "capacity granularity 1: %d %sh\n", + battery->capacity_granularity_1, + acpi_battery_units(battery)); + seq_printf(seq, "capacity granularity 2: %d %sh\n", + battery->capacity_granularity_2, + acpi_battery_units(battery)); + seq_printf(seq, "model number: %s\n", battery->model_number); + seq_printf(seq, "serial number: %s\n", battery->serial_number); + seq_printf(seq, "battery type: %s\n", battery->type); + seq_printf(seq, "OEM info: %s\n", battery->oem_info); + end: + if (result) + seq_printf(seq, "ERROR: Unable to read battery info\n"); + return result; +} + +static int acpi_battery_print_state(struct seq_file *seq, int result) +{ + struct acpi_battery *battery = seq->private; + + if (result) + goto end; + + seq_printf(seq, "present: %s\n", + acpi_battery_present(battery) ? "yes" : "no"); + if (!acpi_battery_present(battery)) + goto end; + + seq_printf(seq, "capacity state: %s\n", + (battery->state & 0x04) ? "critical" : "ok"); + if ((battery->state & 0x01) && (battery->state & 0x02)) + seq_printf(seq, + "charging state: charging/discharging\n"); + else if (battery->state & 0x01) + seq_printf(seq, "charging state: discharging\n"); + else if (battery->state & 0x02) + seq_printf(seq, "charging state: charging\n"); + else + seq_printf(seq, "charging state: charged\n"); + + if (battery->rate_now == ACPI_BATTERY_VALUE_UNKNOWN) + seq_printf(seq, "present rate: unknown\n"); + else + seq_printf(seq, "present rate: %d %s\n", + battery->rate_now, acpi_battery_units(battery)); + + if (battery->capacity_now == ACPI_BATTERY_VALUE_UNKNOWN) + seq_printf(seq, "remaining capacity: unknown\n"); + else + seq_printf(seq, "remaining capacity: %d %sh\n", + battery->capacity_now, acpi_battery_units(battery)); + if (battery->voltage_now == ACPI_BATTERY_VALUE_UNKNOWN) + seq_printf(seq, "present voltage: unknown\n"); + else + seq_printf(seq, "present voltage: %d mV\n", + battery->voltage_now); + end: + if (result) + seq_printf(seq, "ERROR: Unable to read battery state\n"); + + return result; +} + +static int acpi_battery_print_alarm(struct seq_file *seq, int result) +{ + struct acpi_battery *battery = seq->private; + + if (result) + goto end; + + if (!acpi_battery_present(battery)) { + seq_printf(seq, "present: no\n"); + goto end; + } + seq_printf(seq, "alarm: "); + if (!battery->alarm) + seq_printf(seq, "unsupported\n"); + else + seq_printf(seq, "%u %sh\n", battery->alarm, + acpi_battery_units(battery)); + end: + if (result) + seq_printf(seq, "ERROR: Unable to read battery alarm\n"); + return result; +} + +static ssize_t acpi_battery_write_alarm(struct file *file, + const char __user * buffer, + size_t count, loff_t * ppos) +{ + int result = 0; + char alarm_string[12] = { '\0' }; + struct seq_file *m = file->private_data; + struct acpi_battery *battery = m->private; + + if (!battery || (count > sizeof(alarm_string) - 1)) + return -EINVAL; + if (!acpi_battery_present(battery)) { + result = -ENODEV; + goto end; + } + if (copy_from_user(alarm_string, buffer, count)) { + result = -EFAULT; + goto end; + } + alarm_string[count] = '\0'; + battery->alarm = simple_strtol(alarm_string, NULL, 0); + result = acpi_battery_set_alarm(battery); + end: + if (!result) + return count; + return result; +} + +typedef int(*print_func)(struct seq_file *seq, int result); + +static print_func acpi_print_funcs[ACPI_BATTERY_NUMFILES] = { + acpi_battery_print_info, + acpi_battery_print_state, + acpi_battery_print_alarm, +}; + +static int acpi_battery_read(int fid, struct seq_file *seq) +{ + struct acpi_battery *battery = seq->private; + int result = acpi_battery_update(battery); + return acpi_print_funcs[fid](seq, result); +} + +#define DECLARE_FILE_FUNCTIONS(_name) \ +static int acpi_battery_read_##_name(struct seq_file *seq, void *offset) \ +{ \ + return acpi_battery_read(_name##_tag, seq); \ +} \ +static int acpi_battery_##_name##_open_fs(struct inode *inode, struct file *file) \ +{ \ + return single_open(file, acpi_battery_read_##_name, PDE_DATA(inode)); \ +} + +DECLARE_FILE_FUNCTIONS(info); +DECLARE_FILE_FUNCTIONS(state); +DECLARE_FILE_FUNCTIONS(alarm); + +#undef DECLARE_FILE_FUNCTIONS + +#define FILE_DESCRIPTION_RO(_name) \ + { \ + .name = __stringify(_name), \ + .mode = S_IRUGO, \ + .ops = { \ + .open = acpi_battery_##_name##_open_fs, \ + .read = seq_read, \ + .llseek = seq_lseek, \ + .release = single_release, \ + .owner = THIS_MODULE, \ + }, \ + } + +#define FILE_DESCRIPTION_RW(_name) \ + { \ + .name = __stringify(_name), \ + .mode = S_IFREG | S_IRUGO | S_IWUSR, \ + .ops = { \ + .open = acpi_battery_##_name##_open_fs, \ + .read = seq_read, \ + .llseek = seq_lseek, \ + .write = acpi_battery_write_##_name, \ + .release = single_release, \ + .owner = THIS_MODULE, \ + }, \ + } + +static const struct battery_file { + struct file_operations ops; + umode_t mode; + const char *name; +} acpi_battery_file[] = { + FILE_DESCRIPTION_RO(info), + FILE_DESCRIPTION_RO(state), + FILE_DESCRIPTION_RW(alarm), +}; + +#undef FILE_DESCRIPTION_RO +#undef FILE_DESCRIPTION_RW + +static int acpi_battery_add_fs(struct acpi_device *device) +{ + struct proc_dir_entry *entry = NULL; + int i; + + printk(KERN_WARNING PREFIX "Deprecated procfs I/F for battery is loaded," + " please retry with CONFIG_ACPI_PROCFS_POWER cleared\n"); + if (!acpi_device_dir(device)) { + acpi_device_dir(device) = proc_mkdir(acpi_device_bid(device), + acpi_battery_dir); + if (!acpi_device_dir(device)) + return -ENODEV; + } + + for (i = 0; i < ACPI_BATTERY_NUMFILES; ++i) { + entry = proc_create_data(acpi_battery_file[i].name, + acpi_battery_file[i].mode, + acpi_device_dir(device), + &acpi_battery_file[i].ops, + acpi_driver_data(device)); + if (!entry) + return -ENODEV; + } + return 0; +} + +static void acpi_battery_remove_fs(struct acpi_device *device) +{ + int i; + if (!acpi_device_dir(device)) + return; + for (i = 0; i < ACPI_BATTERY_NUMFILES; ++i) + remove_proc_entry(acpi_battery_file[i].name, + acpi_device_dir(device)); + + remove_proc_entry(acpi_device_bid(device), acpi_battery_dir); + acpi_device_dir(device) = NULL; +} + +#endif + /* -------------------------------------------------------------------------- Driver Interface -------------------------------------------------------------------------- */ @@ -790,6 +1090,15 @@ static int acpi_battery_add(struct acpi_device *device) result = acpi_battery_update(battery); if (result) goto fail; +#ifdef CONFIG_ACPI_PROCFS_POWER + result = acpi_battery_add_fs(device); +#endif + if (result) { +#ifdef CONFIG_ACPI_PROCFS_POWER + acpi_battery_remove_fs(device); +#endif + goto fail; + } printk(KERN_INFO PREFIX "%s Slot [%s] (battery %s)\n", ACPI_BATTERY_DEVICE_NAME, acpi_device_bid(device), @@ -816,6 +1125,9 @@ static int acpi_battery_remove(struct acpi_device *device) return -EINVAL; battery = acpi_driver_data(device); unregister_pm_notifier(&battery->pm_nb); +#ifdef CONFIG_ACPI_PROCFS_POWER + acpi_battery_remove_fs(device); +#endif sysfs_remove_battery(battery); mutex_destroy(&battery->lock); mutex_destroy(&battery->sysfs_lock); @@ -866,7 +1178,19 @@ static void __init acpi_battery_init_async(void *unused, async_cookie_t cookie) if (dmi_check_system(bat_dmi_table)) battery_bix_broken_package = 1; - acpi_bus_register_driver(&acpi_battery_driver); + +#ifdef CONFIG_ACPI_PROCFS_POWER + acpi_battery_dir = acpi_lock_battery_dir(); + if (!acpi_battery_dir) + return; +#endif + if (acpi_bus_register_driver(&acpi_battery_driver) < 0) { +#ifdef CONFIG_ACPI_PROCFS_POWER + acpi_unlock_battery_dir(acpi_battery_dir); +#endif + return; + } + return; } static int __init acpi_battery_init(void) @@ -878,6 +1202,9 @@ static int __init acpi_battery_init(void) static void __exit acpi_battery_exit(void) { acpi_bus_unregister_driver(&acpi_battery_driver); +#ifdef CONFIG_ACPI_PROCFS_POWER + acpi_unlock_battery_dir(acpi_battery_dir); +#endif } module_init(acpi_battery_init); -- cgit v1.2.1 From 43d9490244254d2d6adb0f3c6275c7b8d032a2dd Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Mon, 5 May 2014 11:38:08 +0200 Subject: ACPI / video: Add use_native_backlight quirks for more systems ThinkPad T430: extend the T430s entry to also cover the T430 (note we also have another entry for T430's with a different DMI_PRODUCT_VERSION). ThinkPad T430 Reported-and-tested-by: edm References: https://bugzilla.kernel.org/show_bug.cgi?id=51231 Thinkpad T530 Reported-and-tested-by: Balint Szigeti References: https://bugzilla.redhat.com/show_bug.cgi?id=1089545 Acer Aspire 5742G Reported-and-tested-by: AnAkkk References: https://bugzilla.kernel.org/show_bug.cgi?id=35622 Cc: All applicable Signed-off-by: Hans de Goede Signed-off-by: Rafael J. Wysocki --- drivers/acpi/video.c | 20 ++++++++++++++++++-- 1 file changed, 18 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/acpi/video.c b/drivers/acpi/video.c index 8b6990e417ec..88393899a0bc 100644 --- a/drivers/acpi/video.c +++ b/drivers/acpi/video.c @@ -457,10 +457,10 @@ static struct dmi_system_id video_dmi_table[] __initdata = { }, { .callback = video_set_use_native_backlight, - .ident = "ThinkPad T430s", + .ident = "ThinkPad T430 and T430s", .matches = { DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"), - DMI_MATCH(DMI_PRODUCT_VERSION, "ThinkPad T430s"), + DMI_MATCH(DMI_PRODUCT_VERSION, "ThinkPad T430"), }, }, { @@ -471,6 +471,14 @@ static struct dmi_system_id video_dmi_table[] __initdata = { DMI_MATCH(DMI_PRODUCT_VERSION, "ThinkPad X230"), }, }, + { + .callback = video_set_use_native_backlight, + .ident = "ThinkPad T530", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"), + DMI_MATCH(DMI_PRODUCT_VERSION, "ThinkPad T530"), + }, + }, { .callback = video_set_use_native_backlight, .ident = "ThinkPad X1 Carbon", @@ -511,6 +519,14 @@ static struct dmi_system_id video_dmi_table[] __initdata = { DMI_MATCH(DMI_PRODUCT_NAME, "Aspire 5733Z"), }, }, + { + .callback = video_set_use_native_backlight, + .ident = "Acer Aspire 5742G", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Acer"), + DMI_MATCH(DMI_PRODUCT_NAME, "Aspire 5742G"), + }, + }, { .callback = video_set_use_native_backlight, .ident = "Acer Aspire V5-431", -- cgit v1.2.1 From e9d14aeb3005fc09a937ca419c08b3c612a76a90 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Michel=20D=C3=A4nzer?= Date: Tue, 22 Apr 2014 16:53:52 +0900 Subject: drm/radeon: Fix num_banks calculation for SI MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The way the tile mode array index was calculated only makes sense for the CIK specific macrotile mode array. For SI, we need to use one of the tile mode array indices reserved for displayable surfaces. This happened to result in correct display most if not all of the time because most of the SI tiling modes use the same number of banks. Signed-off-by: Michel Dänzer Reviewed-by: Alex Deucher Signed-off-by: Christian König --- drivers/gpu/drm/radeon/atombios_crtc.c | 46 +++++++++++++++++++++++----------- 1 file changed, 31 insertions(+), 15 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/radeon/atombios_crtc.c b/drivers/gpu/drm/radeon/atombios_crtc.c index fb187c78978f..229be38cc6ca 100644 --- a/drivers/gpu/drm/radeon/atombios_crtc.c +++ b/drivers/gpu/drm/radeon/atombios_crtc.c @@ -1177,27 +1177,43 @@ static int dce4_crtc_do_set_base(struct drm_crtc *crtc, /* Set NUM_BANKS. */ if (rdev->family >= CHIP_TAHITI) { - unsigned tileb, index, num_banks, tile_split_bytes; + unsigned index, num_banks; - /* Calculate the macrotile mode index. */ - tile_split_bytes = 64 << tile_split; - tileb = 8 * 8 * target_fb->bits_per_pixel / 8; - tileb = min(tile_split_bytes, tileb); + if (rdev->family >= CHIP_BONAIRE) { + unsigned tileb, tile_split_bytes; - for (index = 0; tileb > 64; index++) { - tileb >>= 1; - } + /* Calculate the macrotile mode index. */ + tile_split_bytes = 64 << tile_split; + tileb = 8 * 8 * target_fb->bits_per_pixel / 8; + tileb = min(tile_split_bytes, tileb); - if (index >= 16) { - DRM_ERROR("Wrong screen bpp (%u) or tile split (%u)\n", - target_fb->bits_per_pixel, tile_split); - return -EINVAL; - } + for (index = 0; tileb > 64; index++) + tileb >>= 1; + + if (index >= 16) { + DRM_ERROR("Wrong screen bpp (%u) or tile split (%u)\n", + target_fb->bits_per_pixel, tile_split); + return -EINVAL; + } - if (rdev->family >= CHIP_BONAIRE) num_banks = (rdev->config.cik.macrotile_mode_array[index] >> 6) & 0x3; - else + } else { + switch (target_fb->bits_per_pixel) { + case 8: + index = 10; + break; + case 16: + index = SI_TILE_MODE_COLOR_2D_SCANOUT_16BPP; + break; + default: + case 32: + index = SI_TILE_MODE_COLOR_2D_SCANOUT_32BPP; + break; + } + num_banks = (rdev->config.si.tile_mode_array[index] >> 20) & 0x3; + } + fb_format |= EVERGREEN_GRPH_NUM_BANKS(num_banks); } else { /* NI and older. */ -- cgit v1.2.1 From aa4c8b36e5fcf70ba5ec7d175da19dac4a33c51a Mon Sep 17 00:00:00 2001 From: Maarten Lankhorst Date: Thu, 24 Apr 2014 13:29:14 +0200 Subject: drm/radeon: drm/radeon: add missing radeon_semaphore_free to error path MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit It would appear this bug has been copy/pasted many times without being noticed. Signed-off-by: Maarten Lankhorst Signed-off-by: Christian König Reviewed-by: Alex Deucher --- drivers/gpu/drm/radeon/cik.c | 1 + drivers/gpu/drm/radeon/cik_sdma.c | 1 + drivers/gpu/drm/radeon/evergreen_dma.c | 1 + drivers/gpu/drm/radeon/r600.c | 1 + drivers/gpu/drm/radeon/r600_dma.c | 1 + drivers/gpu/drm/radeon/rv770_dma.c | 1 + drivers/gpu/drm/radeon/si_dma.c | 1 + 7 files changed, 7 insertions(+) (limited to 'drivers') diff --git a/drivers/gpu/drm/radeon/cik.c b/drivers/gpu/drm/radeon/cik.c index 421c6084cbfc..5143e0bf2172 100644 --- a/drivers/gpu/drm/radeon/cik.c +++ b/drivers/gpu/drm/radeon/cik.c @@ -3702,6 +3702,7 @@ int cik_copy_cpdma(struct radeon_device *rdev, r = radeon_fence_emit(rdev, fence, ring->idx); if (r) { radeon_ring_unlock_undo(rdev, ring); + radeon_semaphore_free(rdev, &sem, NULL); return r; } diff --git a/drivers/gpu/drm/radeon/cik_sdma.c b/drivers/gpu/drm/radeon/cik_sdma.c index f7e46cf682af..72e464c79a88 100644 --- a/drivers/gpu/drm/radeon/cik_sdma.c +++ b/drivers/gpu/drm/radeon/cik_sdma.c @@ -562,6 +562,7 @@ int cik_copy_dma(struct radeon_device *rdev, r = radeon_fence_emit(rdev, fence, ring->idx); if (r) { radeon_ring_unlock_undo(rdev, ring); + radeon_semaphore_free(rdev, &sem, NULL); return r; } diff --git a/drivers/gpu/drm/radeon/evergreen_dma.c b/drivers/gpu/drm/radeon/evergreen_dma.c index 287fe966d7de..478caefe0fef 100644 --- a/drivers/gpu/drm/radeon/evergreen_dma.c +++ b/drivers/gpu/drm/radeon/evergreen_dma.c @@ -151,6 +151,7 @@ int evergreen_copy_dma(struct radeon_device *rdev, r = radeon_fence_emit(rdev, fence, ring->idx); if (r) { radeon_ring_unlock_undo(rdev, ring); + radeon_semaphore_free(rdev, &sem, NULL); return r; } diff --git a/drivers/gpu/drm/radeon/r600.c b/drivers/gpu/drm/radeon/r600.c index 6c4699362bca..bbc189fd3ddc 100644 --- a/drivers/gpu/drm/radeon/r600.c +++ b/drivers/gpu/drm/radeon/r600.c @@ -2839,6 +2839,7 @@ int r600_copy_cpdma(struct radeon_device *rdev, r = radeon_fence_emit(rdev, fence, ring->idx); if (r) { radeon_ring_unlock_undo(rdev, ring); + radeon_semaphore_free(rdev, &sem, NULL); return r; } diff --git a/drivers/gpu/drm/radeon/r600_dma.c b/drivers/gpu/drm/radeon/r600_dma.c index 53fcb28f5578..4969cef44a19 100644 --- a/drivers/gpu/drm/radeon/r600_dma.c +++ b/drivers/gpu/drm/radeon/r600_dma.c @@ -489,6 +489,7 @@ int r600_copy_dma(struct radeon_device *rdev, r = radeon_fence_emit(rdev, fence, ring->idx); if (r) { radeon_ring_unlock_undo(rdev, ring); + radeon_semaphore_free(rdev, &sem, NULL); return r; } diff --git a/drivers/gpu/drm/radeon/rv770_dma.c b/drivers/gpu/drm/radeon/rv770_dma.c index aca8cbe8a335..bbf2e076ee45 100644 --- a/drivers/gpu/drm/radeon/rv770_dma.c +++ b/drivers/gpu/drm/radeon/rv770_dma.c @@ -86,6 +86,7 @@ int rv770_copy_dma(struct radeon_device *rdev, r = radeon_fence_emit(rdev, fence, ring->idx); if (r) { radeon_ring_unlock_undo(rdev, ring); + radeon_semaphore_free(rdev, &sem, NULL); return r; } diff --git a/drivers/gpu/drm/radeon/si_dma.c b/drivers/gpu/drm/radeon/si_dma.c index cf0fdad8c278..de0ca070122f 100644 --- a/drivers/gpu/drm/radeon/si_dma.c +++ b/drivers/gpu/drm/radeon/si_dma.c @@ -213,6 +213,7 @@ int si_copy_dma(struct radeon_device *rdev, r = radeon_fence_emit(rdev, fence, ring->idx); if (r) { radeon_ring_unlock_undo(rdev, ring); + radeon_semaphore_free(rdev, &sem, NULL); return r; } -- cgit v1.2.1 From cde10122dc126a223e783f0b40bdb08cc332ab17 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Christian=20K=C3=B6nig?= Date: Fri, 2 May 2014 14:27:42 +0200 Subject: drm/radeon: check that we have a clock before PLL setup MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Partially fixes: https://bugzilla.kernel.org/show_bug.cgi?id=75211 Signed-off-by: Christian König --- drivers/gpu/drm/radeon/atombios_crtc.c | 3 +++ 1 file changed, 3 insertions(+) (limited to 'drivers') diff --git a/drivers/gpu/drm/radeon/atombios_crtc.c b/drivers/gpu/drm/radeon/atombios_crtc.c index 229be38cc6ca..b7983aaee445 100644 --- a/drivers/gpu/drm/radeon/atombios_crtc.c +++ b/drivers/gpu/drm/radeon/atombios_crtc.c @@ -1901,6 +1901,9 @@ int atombios_crtc_mode_set(struct drm_crtc *crtc, (ATOM_DEVICE_TV_SUPPORT | ATOM_DEVICE_CV_SUPPORT)) is_tvcv = true; + if (!radeon_crtc->adjusted_clock) + return -EINVAL; + atombios_crtc_set_pll(crtc, adjusted_mode); if (ASIC_IS_DCE4(rdev)) -- cgit v1.2.1 From cbe655137aa8f644f4985021a1e1e65df1d28fa8 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Christian=20K=C3=B6nig?= Date: Thu, 1 May 2014 19:00:41 +0200 Subject: drm/radeon: lower the ref * post PLL maximum MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Fixes: https://bugzilla.kernel.org/show_bug.cgi?id=75241 Signed-off-by: Christian König --- drivers/gpu/drm/radeon/radeon_display.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/radeon/radeon_display.c b/drivers/gpu/drm/radeon/radeon_display.c index 9ff0e2f1be6a..408b6ac53f0b 100644 --- a/drivers/gpu/drm/radeon/radeon_display.c +++ b/drivers/gpu/drm/radeon/radeon_display.c @@ -862,7 +862,7 @@ static void avivo_get_fb_ref_div(unsigned nom, unsigned den, unsigned post_div, unsigned *fb_div, unsigned *ref_div) { /* limit reference * post divider to a maximum */ - ref_div_max = min(210 / post_div, ref_div_max); + ref_div_max = min(128 / post_div, ref_div_max); /* get matching reference and feedback divider */ *ref_div = min(max(DIV_ROUND_CLOSEST(den, post_div), 1u), ref_div_max); -- cgit v1.2.1 From b0a9f22a182487996e530b38e07f02d8ea0bc3cc Mon Sep 17 00:00:00 2001 From: Samuel Li Date: Wed, 30 Apr 2014 18:40:48 -0400 Subject: drm/radeon: add Mullins chip family MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Mullins is a new CI-based APU. Signed-off-by: Samuel Li Signed-off-by: Alex Deucher Signed-off-by: Christian König --- drivers/gpu/drm/radeon/radeon_asic.c | 1 + drivers/gpu/drm/radeon/radeon_device.c | 1 + drivers/gpu/drm/radeon/radeon_family.h | 1 + 3 files changed, 3 insertions(+) (limited to 'drivers') diff --git a/drivers/gpu/drm/radeon/radeon_asic.c b/drivers/gpu/drm/radeon/radeon_asic.c index b8a24a75d4ff..be20e62dac83 100644 --- a/drivers/gpu/drm/radeon/radeon_asic.c +++ b/drivers/gpu/drm/radeon/radeon_asic.c @@ -2516,6 +2516,7 @@ int radeon_asic_init(struct radeon_device *rdev) break; case CHIP_KAVERI: case CHIP_KABINI: + case CHIP_MULLINS: rdev->asic = &kv_asic; /* set num crtcs */ if (rdev->family == CHIP_KAVERI) { diff --git a/drivers/gpu/drm/radeon/radeon_device.c b/drivers/gpu/drm/radeon/radeon_device.c index 511fe26198e4..0e770bbf7e29 100644 --- a/drivers/gpu/drm/radeon/radeon_device.c +++ b/drivers/gpu/drm/radeon/radeon_device.c @@ -99,6 +99,7 @@ static const char radeon_family_name[][16] = { "KAVERI", "KABINI", "HAWAII", + "MULLINS", "LAST", }; diff --git a/drivers/gpu/drm/radeon/radeon_family.h b/drivers/gpu/drm/radeon/radeon_family.h index 9da5da4ffd17..4b7b87f71a63 100644 --- a/drivers/gpu/drm/radeon/radeon_family.h +++ b/drivers/gpu/drm/radeon/radeon_family.h @@ -97,6 +97,7 @@ enum radeon_family { CHIP_KAVERI, CHIP_KABINI, CHIP_HAWAII, + CHIP_MULLINS, CHIP_LAST, }; -- cgit v1.2.1 From f73a9e837286bb67c54701441cb51c54aa4abd6a Mon Sep 17 00:00:00 2001 From: Samuel Li Date: Wed, 30 Apr 2014 18:40:49 -0400 Subject: drm/radeon: update cik init for Mullins. MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Also add golden registers, update firmware loading functions. Signed-off-by: Samuel Li Signed-off-by: Alex Deucher Signed-off-by: Christian König --- drivers/gpu/drm/radeon/cik.c | 71 +++++++++++++++++++++++++++++++++++ drivers/gpu/drm/radeon/radeon_ucode.h | 1 + 2 files changed, 72 insertions(+) (limited to 'drivers') diff --git a/drivers/gpu/drm/radeon/cik.c b/drivers/gpu/drm/radeon/cik.c index 5143e0bf2172..d2fd98968085 100644 --- a/drivers/gpu/drm/radeon/cik.c +++ b/drivers/gpu/drm/radeon/cik.c @@ -63,6 +63,12 @@ MODULE_FIRMWARE("radeon/KABINI_ce.bin"); MODULE_FIRMWARE("radeon/KABINI_mec.bin"); MODULE_FIRMWARE("radeon/KABINI_rlc.bin"); MODULE_FIRMWARE("radeon/KABINI_sdma.bin"); +MODULE_FIRMWARE("radeon/MULLINS_pfp.bin"); +MODULE_FIRMWARE("radeon/MULLINS_me.bin"); +MODULE_FIRMWARE("radeon/MULLINS_ce.bin"); +MODULE_FIRMWARE("radeon/MULLINS_mec.bin"); +MODULE_FIRMWARE("radeon/MULLINS_rlc.bin"); +MODULE_FIRMWARE("radeon/MULLINS_sdma.bin"); extern int r600_ih_ring_alloc(struct radeon_device *rdev); extern void r600_ih_ring_fini(struct radeon_device *rdev); @@ -1473,6 +1479,43 @@ static const u32 hawaii_mgcg_cgcg_init[] = 0xd80c, 0xff000ff0, 0x00000100 }; +static const u32 godavari_golden_registers[] = +{ + 0x55e4, 0xff607fff, 0xfc000100, + 0x6ed8, 0x00010101, 0x00010000, + 0x9830, 0xffffffff, 0x00000000, + 0x98302, 0xf00fffff, 0x00000400, + 0x6130, 0xffffffff, 0x00010000, + 0x5bb0, 0x000000f0, 0x00000070, + 0x5bc0, 0xf0311fff, 0x80300000, + 0x98f8, 0x73773777, 0x12010001, + 0x98fc, 0xffffffff, 0x00000010, + 0x8030, 0x00001f0f, 0x0000100a, + 0x2f48, 0x73773777, 0x12010001, + 0x2408, 0x000fffff, 0x000c007f, + 0x8a14, 0xf000003f, 0x00000007, + 0x8b24, 0xffffffff, 0x00ff0fff, + 0x30a04, 0x0000ff0f, 0x00000000, + 0x28a4c, 0x07ffffff, 0x06000000, + 0x4d8, 0x00000fff, 0x00000100, + 0xd014, 0x00010000, 0x00810001, + 0xd814, 0x00010000, 0x00810001, + 0x3e78, 0x00000001, 0x00000002, + 0xc768, 0x00000008, 0x00000008, + 0xc770, 0x00000f00, 0x00000800, + 0xc774, 0x00000f00, 0x00000800, + 0xc798, 0x00ffffff, 0x00ff7fbf, + 0xc79c, 0x00ffffff, 0x00ff7faf, + 0x8c00, 0x000000ff, 0x00000001, + 0x214f8, 0x01ff01ff, 0x00000002, + 0x21498, 0x007ff800, 0x00200000, + 0x2015c, 0xffffffff, 0x00000f40, + 0x88c4, 0x001f3ae3, 0x00000082, + 0x88d4, 0x0000001f, 0x00000010, + 0x30934, 0xffffffff, 0x00000000 +}; + + static void cik_init_golden_registers(struct radeon_device *rdev) { switch (rdev->family) { @@ -1504,6 +1547,20 @@ static void cik_init_golden_registers(struct radeon_device *rdev) kalindi_golden_spm_registers, (const u32)ARRAY_SIZE(kalindi_golden_spm_registers)); break; + case CHIP_MULLINS: + radeon_program_register_sequence(rdev, + kalindi_mgcg_cgcg_init, + (const u32)ARRAY_SIZE(kalindi_mgcg_cgcg_init)); + radeon_program_register_sequence(rdev, + godavari_golden_registers, + (const u32)ARRAY_SIZE(godavari_golden_registers)); + radeon_program_register_sequence(rdev, + kalindi_golden_common_registers, + (const u32)ARRAY_SIZE(kalindi_golden_common_registers)); + radeon_program_register_sequence(rdev, + kalindi_golden_spm_registers, + (const u32)ARRAY_SIZE(kalindi_golden_spm_registers)); + break; case CHIP_KAVERI: radeon_program_register_sequence(rdev, spectre_mgcg_cgcg_init, @@ -1834,6 +1891,15 @@ static int cik_init_microcode(struct radeon_device *rdev) rlc_req_size = KB_RLC_UCODE_SIZE * 4; sdma_req_size = CIK_SDMA_UCODE_SIZE * 4; break; + case CHIP_MULLINS: + chip_name = "MULLINS"; + pfp_req_size = CIK_PFP_UCODE_SIZE * 4; + me_req_size = CIK_ME_UCODE_SIZE * 4; + ce_req_size = CIK_CE_UCODE_SIZE * 4; + mec_req_size = CIK_MEC_UCODE_SIZE * 4; + rlc_req_size = ML_RLC_UCODE_SIZE * 4; + sdma_req_size = CIK_SDMA_UCODE_SIZE * 4; + break; default: BUG(); } @@ -3272,6 +3338,7 @@ static void cik_gpu_init(struct radeon_device *rdev) gb_addr_config = BONAIRE_GB_ADDR_CONFIG_GOLDEN; break; case CHIP_KABINI: + case CHIP_MULLINS: default: rdev->config.cik.max_shader_engines = 1; rdev->config.cik.max_tile_pipes = 2; @@ -5801,6 +5868,9 @@ static int cik_rlc_resume(struct radeon_device *rdev) case CHIP_KABINI: size = KB_RLC_UCODE_SIZE; break; + case CHIP_MULLINS: + size = ML_RLC_UCODE_SIZE; + break; } cik_rlc_stop(rdev); @@ -6549,6 +6619,7 @@ void cik_get_csb_buffer(struct radeon_device *rdev, volatile u32 *buffer) buffer[count++] = cpu_to_le32(0x00000000); break; case CHIP_KABINI: + case CHIP_MULLINS: buffer[count++] = cpu_to_le32(0x00000000); /* XXX */ buffer[count++] = cpu_to_le32(0x00000000); break; diff --git a/drivers/gpu/drm/radeon/radeon_ucode.h b/drivers/gpu/drm/radeon/radeon_ucode.h index 58d12938c0b8..4e7c3269b183 100644 --- a/drivers/gpu/drm/radeon/radeon_ucode.h +++ b/drivers/gpu/drm/radeon/radeon_ucode.h @@ -52,6 +52,7 @@ #define BONAIRE_RLC_UCODE_SIZE 2048 #define KB_RLC_UCODE_SIZE 2560 #define KV_RLC_UCODE_SIZE 2560 +#define ML_RLC_UCODE_SIZE 2560 /* MC */ #define BTC_MC_UCODE_SIZE 6024 -- cgit v1.2.1 From 3f6f0737ba8e9a1bbd47b8cd221386c39c76cd6a Mon Sep 17 00:00:00 2001 From: Samuel Li Date: Wed, 30 Apr 2014 18:40:50 -0400 Subject: drm/radeon: add Mullins UVD support. MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Has same version of UVD as other CIK parts. Signed-off-by: Samuel Li Signed-off-by: Alex Deucher Signed-off-by: Christian König --- drivers/gpu/drm/radeon/radeon_uvd.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/gpu/drm/radeon/radeon_uvd.c b/drivers/gpu/drm/radeon/radeon_uvd.c index 0f96c471c6d8..1b65ae2433cd 100644 --- a/drivers/gpu/drm/radeon/radeon_uvd.c +++ b/drivers/gpu/drm/radeon/radeon_uvd.c @@ -99,6 +99,7 @@ int radeon_uvd_init(struct radeon_device *rdev) case CHIP_KABINI: case CHIP_KAVERI: case CHIP_HAWAII: + case CHIP_MULLINS: fw_name = FIRMWARE_BONAIRE; break; -- cgit v1.2.1 From 7d032a4b8d460397b6e4a3f343a59fdd1bd5a487 Mon Sep 17 00:00:00 2001 From: Samuel Li Date: Wed, 30 Apr 2014 18:40:51 -0400 Subject: drm/radeon: add Mullins dpm support. MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Generic dpm support similar to Kabini. Mullins specific features will be worked on later. Signed-off-by: Samuel Li Signed-off-by: Alex Deucher Signed-off-by: Christian König --- drivers/gpu/drm/radeon/kv_dpm.c | 20 ++++++++++---------- drivers/gpu/drm/radeon/radeon_pm.c | 1 + 2 files changed, 11 insertions(+), 10 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/radeon/kv_dpm.c b/drivers/gpu/drm/radeon/kv_dpm.c index 16ec9d56a234..6666370e58fa 100644 --- a/drivers/gpu/drm/radeon/kv_dpm.c +++ b/drivers/gpu/drm/radeon/kv_dpm.c @@ -639,7 +639,7 @@ static int kv_force_lowest_valid(struct radeon_device *rdev) static int kv_unforce_levels(struct radeon_device *rdev) { - if (rdev->family == CHIP_KABINI) + if (rdev->family == CHIP_KABINI || rdev->family == CHIP_MULLINS) return kv_notify_message_to_smu(rdev, PPSMC_MSG_NoForcedLevel); else return kv_set_enabled_levels(rdev); @@ -1617,7 +1617,7 @@ static void kv_dpm_powergate_acp(struct radeon_device *rdev, bool gate) if (pi->acp_power_gated == gate) return; - if (rdev->family == CHIP_KABINI) + if (rdev->family == CHIP_KABINI || rdev->family == CHIP_MULLINS) return; pi->acp_power_gated = gate; @@ -1786,7 +1786,7 @@ int kv_dpm_set_power_state(struct radeon_device *rdev) } } - if (rdev->family == CHIP_KABINI) { + if (rdev->family == CHIP_KABINI || rdev->family == CHIP_MULLINS) { if (pi->enable_dpm) { kv_set_valid_clock_range(rdev, new_ps); kv_update_dfs_bypass_settings(rdev, new_ps); @@ -1862,7 +1862,7 @@ void kv_dpm_reset_asic(struct radeon_device *rdev) { struct kv_power_info *pi = kv_get_pi(rdev); - if (rdev->family == CHIP_KABINI) { + if (rdev->family == CHIP_KABINI || rdev->family == CHIP_MULLINS) { kv_force_lowest_valid(rdev); kv_init_graphics_levels(rdev); kv_program_bootup_state(rdev); @@ -1941,7 +1941,7 @@ static int kv_force_dpm_highest(struct radeon_device *rdev) break; } - if (rdev->family == CHIP_KABINI) + if (rdev->family == CHIP_KABINI || rdev->family == CHIP_MULLINS) return kv_send_msg_to_smc_with_parameter(rdev, PPSMC_MSG_DPM_ForceState, i); else return kv_set_enabled_level(rdev, i); @@ -1961,7 +1961,7 @@ static int kv_force_dpm_lowest(struct radeon_device *rdev) break; } - if (rdev->family == CHIP_KABINI) + if (rdev->family == CHIP_KABINI || rdev->family == CHIP_MULLINS) return kv_send_msg_to_smc_with_parameter(rdev, PPSMC_MSG_DPM_ForceState, i); else return kv_set_enabled_level(rdev, i); @@ -2118,7 +2118,7 @@ static void kv_apply_state_adjust_rules(struct radeon_device *rdev, else pi->battery_state = false; - if (rdev->family == CHIP_KABINI) { + if (rdev->family == CHIP_KABINI || rdev->family == CHIP_MULLINS) { ps->dpm0_pg_nb_ps_lo = 0x1; ps->dpm0_pg_nb_ps_hi = 0x0; ps->dpmx_nb_ps_lo = 0x1; @@ -2179,7 +2179,7 @@ static int kv_calculate_nbps_level_settings(struct radeon_device *rdev) if (pi->lowest_valid > pi->highest_valid) return -EINVAL; - if (rdev->family == CHIP_KABINI) { + if (rdev->family == CHIP_KABINI || rdev->family == CHIP_MULLINS) { for (i = pi->lowest_valid; i <= pi->highest_valid; i++) { pi->graphics_level[i].GnbSlow = 1; pi->graphics_level[i].ForceNbPs1 = 0; @@ -2324,7 +2324,7 @@ static void kv_program_nbps_index_settings(struct radeon_device *rdev, struct kv_power_info *pi = kv_get_pi(rdev); u32 nbdpmconfig1; - if (rdev->family == CHIP_KABINI) + if (rdev->family == CHIP_KABINI || rdev->family == CHIP_MULLINS) return; if (pi->sys_info.nb_dpm_enable) { @@ -2631,7 +2631,7 @@ int kv_dpm_init(struct radeon_device *rdev) pi->sram_end = SMC_RAM_END; - if (rdev->family == CHIP_KABINI) + if (rdev->family == CHIP_KABINI || rdev->family == CHIP_MULLINS) pi->high_voltage_t = 4001; pi->enable_nb_dpm = true; diff --git a/drivers/gpu/drm/radeon/radeon_pm.c b/drivers/gpu/drm/radeon/radeon_pm.c index 6fac8efe8340..f30b8426eee2 100644 --- a/drivers/gpu/drm/radeon/radeon_pm.c +++ b/drivers/gpu/drm/radeon/radeon_pm.c @@ -1300,6 +1300,7 @@ int radeon_pm_init(struct radeon_device *rdev) case CHIP_KABINI: case CHIP_KAVERI: case CHIP_HAWAII: + case CHIP_MULLINS: /* DPM requires the RLC, RV770+ dGPU requires SMC */ if (!rdev->rlc_fw) rdev->pm.pm_method = PM_METHOD_PROFILE; -- cgit v1.2.1 From 47f5c7461660b6b550018b83b5b98e330b2d0f7e Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Wed, 30 Apr 2014 18:40:52 -0400 Subject: drm/radeon: dpm updates for KV/KB MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit - Use vddc/sclk dep table for voltage if available - Fix UVD DPM setup - Patch voltage tables properly for non-UVD blocks - Fix DPM + UVD/VCE on Mullins Signed-off-by: Alex Deucher Signed-off-by: Christian König --- drivers/gpu/drm/radeon/kv_dpm.c | 117 +++++++++++++++++++++++++++++++++------- 1 file changed, 97 insertions(+), 20 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/radeon/kv_dpm.c b/drivers/gpu/drm/radeon/kv_dpm.c index 6666370e58fa..3f6e817d97ee 100644 --- a/drivers/gpu/drm/radeon/kv_dpm.c +++ b/drivers/gpu/drm/radeon/kv_dpm.c @@ -546,6 +546,52 @@ static int kv_set_divider_value(struct radeon_device *rdev, return 0; } +static u32 kv_convert_vid2_to_vid7(struct radeon_device *rdev, + struct sumo_vid_mapping_table *vid_mapping_table, + u32 vid_2bit) +{ + struct radeon_clock_voltage_dependency_table *vddc_sclk_table = + &rdev->pm.dpm.dyn_state.vddc_dependency_on_sclk; + u32 i; + + if (vddc_sclk_table && vddc_sclk_table->count) { + if (vid_2bit < vddc_sclk_table->count) + return vddc_sclk_table->entries[vid_2bit].v; + else + return vddc_sclk_table->entries[vddc_sclk_table->count - 1].v; + } else { + for (i = 0; i < vid_mapping_table->num_entries; i++) { + if (vid_mapping_table->entries[i].vid_2bit == vid_2bit) + return vid_mapping_table->entries[i].vid_7bit; + } + return vid_mapping_table->entries[vid_mapping_table->num_entries - 1].vid_7bit; + } +} + +static u32 kv_convert_vid7_to_vid2(struct radeon_device *rdev, + struct sumo_vid_mapping_table *vid_mapping_table, + u32 vid_7bit) +{ + struct radeon_clock_voltage_dependency_table *vddc_sclk_table = + &rdev->pm.dpm.dyn_state.vddc_dependency_on_sclk; + u32 i; + + if (vddc_sclk_table && vddc_sclk_table->count) { + for (i = 0; i < vddc_sclk_table->count; i++) { + if (vddc_sclk_table->entries[i].v == vid_7bit) + return i; + } + return vddc_sclk_table->count - 1; + } else { + for (i = 0; i < vid_mapping_table->num_entries; i++) { + if (vid_mapping_table->entries[i].vid_7bit == vid_7bit) + return vid_mapping_table->entries[i].vid_2bit; + } + + return vid_mapping_table->entries[vid_mapping_table->num_entries - 1].vid_2bit; + } +} + static u16 kv_convert_8bit_index_to_voltage(struct radeon_device *rdev, u16 voltage) { @@ -556,9 +602,9 @@ static u16 kv_convert_2bit_index_to_voltage(struct radeon_device *rdev, u32 vid_2bit) { struct kv_power_info *pi = kv_get_pi(rdev); - u32 vid_8bit = sumo_convert_vid2_to_vid7(rdev, - &pi->sys_info.vid_mapping_table, - vid_2bit); + u32 vid_8bit = kv_convert_vid2_to_vid7(rdev, + &pi->sys_info.vid_mapping_table, + vid_2bit); return kv_convert_8bit_index_to_voltage(rdev, (u16)vid_8bit); } @@ -1362,13 +1408,20 @@ static int kv_update_uvd_dpm(struct radeon_device *rdev, bool gate) struct radeon_uvd_clock_voltage_dependency_table *table = &rdev->pm.dpm.dyn_state.uvd_clock_voltage_dependency_table; int ret; + u32 mask; if (!gate) { - if (!pi->caps_uvd_dpm || table->count || pi->caps_stable_p_state) + if (table->count) pi->uvd_boot_level = table->count - 1; else pi->uvd_boot_level = 0; + if (!pi->caps_uvd_dpm || pi->caps_stable_p_state) { + mask = 1 << pi->uvd_boot_level; + } else { + mask = 0x1f; + } + ret = kv_copy_bytes_to_smc(rdev, pi->dpm_table_start + offsetof(SMU7_Fusion_DpmTable, UvdBootLevel), @@ -1377,11 +1430,9 @@ static int kv_update_uvd_dpm(struct radeon_device *rdev, bool gate) if (ret) return ret; - if (!pi->caps_uvd_dpm || - pi->caps_stable_p_state) - kv_send_msg_to_smc_with_parameter(rdev, - PPSMC_MSG_UVDDPM_SetEnabledMask, - (1 << pi->uvd_boot_level)); + kv_send_msg_to_smc_with_parameter(rdev, + PPSMC_MSG_UVDDPM_SetEnabledMask, + mask); } return kv_enable_uvd_dpm(rdev, !gate); @@ -1812,6 +1863,8 @@ int kv_dpm_set_power_state(struct radeon_device *rdev) return ret; } kv_update_sclk_t(rdev); + if (rdev->family == CHIP_MULLINS) + kv_enable_nb_dpm(rdev); } } else { if (pi->enable_dpm) { @@ -1901,14 +1954,41 @@ static void kv_construct_max_power_limits_table(struct radeon_device *rdev, static void kv_patch_voltage_values(struct radeon_device *rdev) { int i; - struct radeon_uvd_clock_voltage_dependency_table *table = + struct radeon_uvd_clock_voltage_dependency_table *uvd_table = &rdev->pm.dpm.dyn_state.uvd_clock_voltage_dependency_table; + struct radeon_vce_clock_voltage_dependency_table *vce_table = + &rdev->pm.dpm.dyn_state.vce_clock_voltage_dependency_table; + struct radeon_clock_voltage_dependency_table *samu_table = + &rdev->pm.dpm.dyn_state.samu_clock_voltage_dependency_table; + struct radeon_clock_voltage_dependency_table *acp_table = + &rdev->pm.dpm.dyn_state.acp_clock_voltage_dependency_table; + + if (uvd_table->count) { + for (i = 0; i < uvd_table->count; i++) + uvd_table->entries[i].v = + kv_convert_8bit_index_to_voltage(rdev, + uvd_table->entries[i].v); + } + + if (vce_table->count) { + for (i = 0; i < vce_table->count; i++) + vce_table->entries[i].v = + kv_convert_8bit_index_to_voltage(rdev, + vce_table->entries[i].v); + } - if (table->count) { - for (i = 0; i < table->count; i++) - table->entries[i].v = + if (samu_table->count) { + for (i = 0; i < samu_table->count; i++) + samu_table->entries[i].v = kv_convert_8bit_index_to_voltage(rdev, - table->entries[i].v); + samu_table->entries[i].v); + } + + if (acp_table->count) { + for (i = 0; i < acp_table->count; i++) + acp_table->entries[i].v = + kv_convert_8bit_index_to_voltage(rdev, + acp_table->entries[i].v); } } @@ -2253,9 +2333,9 @@ static void kv_init_graphics_levels(struct radeon_device *rdev) break; kv_set_divider_value(rdev, i, table->entries[i].clk); - vid_2bit = sumo_convert_vid7_to_vid2(rdev, - &pi->sys_info.vid_mapping_table, - table->entries[i].v); + vid_2bit = kv_convert_vid7_to_vid2(rdev, + &pi->sys_info.vid_mapping_table, + table->entries[i].v); kv_set_vid(rdev, i, vid_2bit); kv_set_at(rdev, i, pi->at[i]); kv_dpm_power_level_enabled_for_throttle(rdev, i, true); @@ -2631,9 +2711,6 @@ int kv_dpm_init(struct radeon_device *rdev) pi->sram_end = SMC_RAM_END; - if (rdev->family == CHIP_KABINI || rdev->family == CHIP_MULLINS) - pi->high_voltage_t = 4001; - pi->enable_nb_dpm = true; pi->caps_power_containment = true; -- cgit v1.2.1 From b214f2a4ba415dcad40fcc7c195d0a402f8211de Mon Sep 17 00:00:00 2001 From: Samuel Li Date: Wed, 30 Apr 2014 18:40:53 -0400 Subject: drm/radeon: modesetting updates for Mullins. MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Uses the same code as Kabini. Signed-off-by: Samuel Li Signed-off-by: Alex Deucher Signed-off-by: Christian König --- drivers/gpu/drm/radeon/atombios_crtc.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/radeon/atombios_crtc.c b/drivers/gpu/drm/radeon/atombios_crtc.c index b7983aaee445..c31c12b4e666 100644 --- a/drivers/gpu/drm/radeon/atombios_crtc.c +++ b/drivers/gpu/drm/radeon/atombios_crtc.c @@ -1736,8 +1736,9 @@ static int radeon_atom_pick_pll(struct drm_crtc *crtc) } /* otherwise, pick one of the plls */ if ((rdev->family == CHIP_KAVERI) || - (rdev->family == CHIP_KABINI)) { - /* KB/KV has PPLL1 and PPLL2 */ + (rdev->family == CHIP_KABINI) || + (rdev->family == CHIP_MULLINS)) { + /* KB/KV/ML has PPLL1 and PPLL2 */ pll_in_use = radeon_get_pll_use_mask(crtc); if (!(pll_in_use & (1 << ATOM_PPLL2))) return ATOM_PPLL2; -- cgit v1.2.1 From 428beddd0236842c6e8f4aabe9597763c2ae9a3b Mon Sep 17 00:00:00 2001 From: Leo Liu Date: Wed, 30 Apr 2014 18:40:54 -0400 Subject: drm/radeon: add Mullins VCE support MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit VCE 2.0 just like the other CIK parts. Signed-off-by: Leo Liu Signed-off-by: Alex Deucher Signed-off-by: Christian König --- drivers/gpu/drm/radeon/radeon_vce.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/gpu/drm/radeon/radeon_vce.c b/drivers/gpu/drm/radeon/radeon_vce.c index ced53dd03e7c..f73324c81491 100644 --- a/drivers/gpu/drm/radeon/radeon_vce.c +++ b/drivers/gpu/drm/radeon/radeon_vce.c @@ -66,6 +66,7 @@ int radeon_vce_init(struct radeon_device *rdev) case CHIP_BONAIRE: case CHIP_KAVERI: case CHIP_KABINI: + case CHIP_MULLINS: fw_name = FIRMWARE_BONAIRE; break; -- cgit v1.2.1 From 35738392b6c050625e41cc6b941f9828794149b3 Mon Sep 17 00:00:00 2001 From: Chris Cui Date: Tue, 6 May 2014 12:49:58 -0700 Subject: drivers/rtc/rtc-pcf8523.c: fix month definition PCF8523 uses 1-12 to represent month according to datasheet. link: www.nxp.com/documents/data_sheet/PCF8523.pdf. Signed-off-by: Chris Cui Cc: Alessandro Zummo Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/rtc/rtc-pcf8523.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/rtc/rtc-pcf8523.c b/drivers/rtc/rtc-pcf8523.c index 5c8f8226c848..4cdb64be061b 100644 --- a/drivers/rtc/rtc-pcf8523.c +++ b/drivers/rtc/rtc-pcf8523.c @@ -206,7 +206,7 @@ static int pcf8523_rtc_read_time(struct device *dev, struct rtc_time *tm) tm->tm_hour = bcd2bin(regs[2] & 0x3f); tm->tm_mday = bcd2bin(regs[3] & 0x3f); tm->tm_wday = regs[4] & 0x7; - tm->tm_mon = bcd2bin(regs[5] & 0x1f); + tm->tm_mon = bcd2bin(regs[5] & 0x1f) - 1; tm->tm_year = bcd2bin(regs[6]) + 100; return rtc_valid_tm(tm); @@ -229,7 +229,7 @@ static int pcf8523_rtc_set_time(struct device *dev, struct rtc_time *tm) regs[3] = bin2bcd(tm->tm_hour); regs[4] = bin2bcd(tm->tm_mday); regs[5] = tm->tm_wday; - regs[6] = bin2bcd(tm->tm_mon); + regs[6] = bin2bcd(tm->tm_mon + 1); regs[7] = bin2bcd(tm->tm_year - 100); msg.addr = client->addr; -- cgit v1.2.1 From 3ca9e5d36afb5c0a6ee6ceee69e507370beb59c6 Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Tue, 6 May 2014 12:50:12 -0700 Subject: agp: info leak in agpioc_info_wrap() On 64 bit systems the agp_info struct has a 4 byte hole between ->agp_mode and ->aper_base. We need to clear it to avoid disclosing stack information to userspace. Signed-off-by: Dan Carpenter Cc: David Airlie Cc: Daniel Vetter Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/char/agp/frontend.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/char/agp/frontend.c b/drivers/char/agp/frontend.c index 8121b4c70ede..b29703324e94 100644 --- a/drivers/char/agp/frontend.c +++ b/drivers/char/agp/frontend.c @@ -730,6 +730,7 @@ static int agpioc_info_wrap(struct agp_file_private *priv, void __user *arg) agp_copy_info(agp_bridge, &kerninfo); + memset(&userinfo, 0, sizeof(userinfo)); userinfo.version.major = kerninfo.version.major; userinfo.version.minor = kerninfo.version.minor; userinfo.bridge_id = kerninfo.device->vendor | -- cgit v1.2.1 From eeb6324dd6668b05192708916f2a4bc463f382ca Mon Sep 17 00:00:00 2001 From: Paulo Zanoni Date: Tue, 6 May 2014 14:56:50 +0300 Subject: drm/i915: consider the source max DP lane count too Even if the panel claims it can support 4 lanes, there's the possibility that the HW can't, so consider this while selecting the max lane count. Reviewed-by: Damien Lespiau Signed-off-by: Paulo Zanoni Signed-off-by: Jani Nikula --- drivers/gpu/drm/i915/intel_dp.c | 20 ++++++++++++++++++-- 1 file changed, 18 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c index 5ca68aa9f237..115662c2f048 100644 --- a/drivers/gpu/drm/i915/intel_dp.c +++ b/drivers/gpu/drm/i915/intel_dp.c @@ -121,6 +121,22 @@ intel_dp_max_link_bw(struct intel_dp *intel_dp) return max_link_bw; } +static u8 intel_dp_max_lane_count(struct intel_dp *intel_dp) +{ + struct intel_digital_port *intel_dig_port = dp_to_dig_port(intel_dp); + struct drm_device *dev = intel_dig_port->base.base.dev; + u8 source_max, sink_max; + + source_max = 4; + if (HAS_DDI(dev) && intel_dig_port->port == PORT_A && + (intel_dig_port->saved_port_bits & DDI_A_4_LANES) == 0) + source_max = 2; + + sink_max = drm_dp_max_lane_count(intel_dp->dpcd); + + return min(source_max, sink_max); +} + /* * The units on the numbers in the next two are... bizarre. Examples will * make it clearer; this one parallels an example in the eDP spec. @@ -171,7 +187,7 @@ intel_dp_mode_valid(struct drm_connector *connector, } max_link_clock = drm_dp_bw_code_to_link_rate(intel_dp_max_link_bw(intel_dp)); - max_lanes = drm_dp_max_lane_count(intel_dp->dpcd); + max_lanes = intel_dp_max_lane_count(intel_dp); max_rate = intel_dp_max_data_rate(max_link_clock, max_lanes); mode_rate = intel_dp_link_required(target_clock, 18); @@ -751,7 +767,7 @@ intel_dp_compute_config(struct intel_encoder *encoder, struct intel_crtc *intel_crtc = encoder->new_crtc; struct intel_connector *intel_connector = intel_dp->attached_connector; int lane_count, clock; - int max_lane_count = drm_dp_max_lane_count(intel_dp->dpcd); + int max_lane_count = intel_dp_max_lane_count(intel_dp); /* Conveniently, the link BW constants become indices with a shift...*/ int max_clock = intel_dp_max_link_bw(intel_dp) >> 3; int bpp, mode_rate; -- cgit v1.2.1 From e13e2b2c468bc54e872ad68126411d6a3f77001a Mon Sep 17 00:00:00 2001 From: Jani Nikula Date: Tue, 6 May 2014 14:56:51 +0300 Subject: drm/i915: clean up VBT eDP link param decoding Use defines, do not set anything if VBT has values unknown to us. Reviewed-by: Damien Lespiau Signed-off-by: Jani Nikula --- drivers/gpu/drm/i915/intel_bios.c | 52 ++++++++++++++++++++++++++++----------- 1 file changed, 38 insertions(+), 14 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/i915/intel_bios.c b/drivers/gpu/drm/i915/intel_bios.c index fa486c5fbb02..aff4a113cda3 100644 --- a/drivers/gpu/drm/i915/intel_bios.c +++ b/drivers/gpu/drm/i915/intel_bios.c @@ -560,47 +560,71 @@ parse_edp(struct drm_i915_private *dev_priv, struct bdb_header *bdb) dev_priv->vbt.edp_pps = *edp_pps; - dev_priv->vbt.edp_rate = edp_link_params->rate ? DP_LINK_BW_2_7 : - DP_LINK_BW_1_62; + switch (edp_link_params->rate) { + case EDP_RATE_1_62: + dev_priv->vbt.edp_rate = DP_LINK_BW_1_62; + break; + case EDP_RATE_2_7: + dev_priv->vbt.edp_rate = DP_LINK_BW_2_7; + break; + default: + DRM_DEBUG_KMS("VBT has unknown eDP link rate value %u\n", + edp_link_params->rate); + break; + } + switch (edp_link_params->lanes) { - case 0: + case EDP_LANE_1: dev_priv->vbt.edp_lanes = 1; break; - case 1: + case EDP_LANE_2: dev_priv->vbt.edp_lanes = 2; break; - case 3: - default: + case EDP_LANE_4: dev_priv->vbt.edp_lanes = 4; break; + default: + DRM_DEBUG_KMS("VBT has unknown eDP lane count value %u\n", + edp_link_params->lanes); + break; } + switch (edp_link_params->preemphasis) { - case 0: + case EDP_PREEMPHASIS_NONE: dev_priv->vbt.edp_preemphasis = DP_TRAIN_PRE_EMPHASIS_0; break; - case 1: + case EDP_PREEMPHASIS_3_5dB: dev_priv->vbt.edp_preemphasis = DP_TRAIN_PRE_EMPHASIS_3_5; break; - case 2: + case EDP_PREEMPHASIS_6dB: dev_priv->vbt.edp_preemphasis = DP_TRAIN_PRE_EMPHASIS_6; break; - case 3: + case EDP_PREEMPHASIS_9_5dB: dev_priv->vbt.edp_preemphasis = DP_TRAIN_PRE_EMPHASIS_9_5; break; + default: + DRM_DEBUG_KMS("VBT has unknown eDP pre-emphasis value %u\n", + edp_link_params->preemphasis); + break; } + switch (edp_link_params->vswing) { - case 0: + case EDP_VSWING_0_4V: dev_priv->vbt.edp_vswing = DP_TRAIN_VOLTAGE_SWING_400; break; - case 1: + case EDP_VSWING_0_6V: dev_priv->vbt.edp_vswing = DP_TRAIN_VOLTAGE_SWING_600; break; - case 2: + case EDP_VSWING_0_8V: dev_priv->vbt.edp_vswing = DP_TRAIN_VOLTAGE_SWING_800; break; - case 3: + case EDP_VSWING_1_2V: dev_priv->vbt.edp_vswing = DP_TRAIN_VOLTAGE_SWING_1200; break; + default: + DRM_DEBUG_KMS("VBT has unknown eDP voltage swing value %u\n", + edp_link_params->vswing); + break; } } -- cgit v1.2.1 From 56071a207602a451f0c46d3dcc8379b59ef576e2 Mon Sep 17 00:00:00 2001 From: Jani Nikula Date: Tue, 6 May 2014 14:56:52 +0300 Subject: drm/i915: use lane count and link rate from VBT as minimums for eDP Most likely the minimums for both should be enough for enabling the native resolution on the eDP, and we'll end up using the predetermined optimal link config for the panel. v2: Add debug prints. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=73539 Tested-by: Markus Blank-Burian Reviewed-by: Damien Lespiau Signed-off-by: Jani Nikula --- drivers/gpu/drm/i915/intel_dp.c | 30 +++++++++++++++++++++++------- 1 file changed, 23 insertions(+), 7 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c index 115662c2f048..8233f2aea665 100644 --- a/drivers/gpu/drm/i915/intel_dp.c +++ b/drivers/gpu/drm/i915/intel_dp.c @@ -767,8 +767,10 @@ intel_dp_compute_config(struct intel_encoder *encoder, struct intel_crtc *intel_crtc = encoder->new_crtc; struct intel_connector *intel_connector = intel_dp->attached_connector; int lane_count, clock; + int min_lane_count = 1; int max_lane_count = intel_dp_max_lane_count(intel_dp); /* Conveniently, the link BW constants become indices with a shift...*/ + int min_clock = 0; int max_clock = intel_dp_max_link_bw(intel_dp) >> 3; int bpp, mode_rate; static int bws[] = { DP_LINK_BW_1_62, DP_LINK_BW_2_7, DP_LINK_BW_5_4 }; @@ -801,19 +803,33 @@ intel_dp_compute_config(struct intel_encoder *encoder, /* Walk through all bpp values. Luckily they're all nicely spaced with 2 * bpc in between. */ bpp = pipe_config->pipe_bpp; - if (is_edp(intel_dp) && dev_priv->vbt.edp_bpp && - dev_priv->vbt.edp_bpp < bpp) { - DRM_DEBUG_KMS("clamping bpp for eDP panel to BIOS-provided %i\n", - dev_priv->vbt.edp_bpp); - bpp = dev_priv->vbt.edp_bpp; + if (is_edp(intel_dp)) { + if (dev_priv->vbt.edp_bpp && dev_priv->vbt.edp_bpp < bpp) { + DRM_DEBUG_KMS("clamping bpp for eDP panel to BIOS-provided %i\n", + dev_priv->vbt.edp_bpp); + bpp = dev_priv->vbt.edp_bpp; + } + + if (dev_priv->vbt.edp_lanes) { + min_lane_count = min(dev_priv->vbt.edp_lanes, + max_lane_count); + DRM_DEBUG_KMS("using min %u lanes per VBT\n", + min_lane_count); + } + + if (dev_priv->vbt.edp_rate) { + min_clock = min(dev_priv->vbt.edp_rate >> 3, max_clock); + DRM_DEBUG_KMS("using min %02x link bw per VBT\n", + bws[min_clock]); + } } for (; bpp >= 6*3; bpp -= 2*3) { mode_rate = intel_dp_link_required(adjusted_mode->crtc_clock, bpp); - for (lane_count = 1; lane_count <= max_lane_count; lane_count <<= 1) { - for (clock = 0; clock <= max_clock; clock++) { + for (lane_count = min_lane_count; lane_count <= max_lane_count; lane_count <<= 1) { + for (clock = min_clock; clock <= max_clock; clock++) { link_clock = drm_dp_bw_code_to_link_rate(bws[clock]); link_avail = intel_dp_max_data_rate(link_clock, lane_count); -- cgit v1.2.1 From e4c610fe051579ba0a1fadf339905b0231c6ef94 Mon Sep 17 00:00:00 2001 From: Egbert Eich Date: Fri, 11 Apr 2014 19:07:44 +0200 Subject: drm/i915/SDVO: For sysfs link put directory and target in correct order When linking the i2c sysfs file into the connector's directory pass directory and link target in the right order. This code was introduced with: commit 931c1c26983b4f84e33b78579fc8d57e4a14c6b4 Author: Imre Deak Date: Tue Feb 11 17:12:51 2014 +0200 drm/i915: sdvo: add i2c sysfs symlink to the connector's directory This is the same what we do for DP connectors, so make things more consistent. Signed-off-by: Egbert Eich Reviewed-by: Imre Deak Signed-off-by: Daniel Vetter Signed-off-by: Jani Nikula --- drivers/gpu/drm/i915/intel_sdvo.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/i915/intel_sdvo.c b/drivers/gpu/drm/i915/intel_sdvo.c index d27155adf5db..46be00d66df3 100644 --- a/drivers/gpu/drm/i915/intel_sdvo.c +++ b/drivers/gpu/drm/i915/intel_sdvo.c @@ -2424,8 +2424,8 @@ intel_sdvo_connector_init(struct intel_sdvo_connector *connector, if (ret < 0) goto err1; - ret = sysfs_create_link(&encoder->ddc.dev.kobj, - &drm_connector->kdev->kobj, + ret = sysfs_create_link(&drm_connector->kdev->kobj, + &encoder->ddc.dev.kobj, encoder->ddc.dev.kobj.name); if (ret < 0) goto err2; -- cgit v1.2.1 From a6f9bf4d2f965b862b95213303d154e02957eed8 Mon Sep 17 00:00:00 2001 From: Levente Kurusa Date: Tue, 6 May 2014 15:57:48 +0200 Subject: libata: clean up ZPODD when a port is detached When a ZPODD device is unbound via sysfs, the ACPI notify handler is not removed. This causes panics as observed in Bug #74601. The panic only happens when the wake happens from outside the kernel (i.e. inserting a media or pressing a button). Add a loop to ata_port_detach which loops through the port's devices and checks if zpodd is enabled, if so call zpodd_exit. Cc: stable@vger.kernel.org Reviewed-by: Aaron Lu Signed-off-by: Levente Kurusa Signed-off-by: Tejun Heo --- drivers/ata/libata-core.c | 9 +++++++++ 1 file changed, 9 insertions(+) (limited to 'drivers') diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c index 73c5d0410d47..886d4d3d63a3 100644 --- a/drivers/ata/libata-core.c +++ b/drivers/ata/libata-core.c @@ -6314,6 +6314,8 @@ int ata_host_activate(struct ata_host *host, int irq, static void ata_port_detach(struct ata_port *ap) { unsigned long flags; + struct ata_link *link; + struct ata_device *dev; if (!ap->ops->error_handler) goto skip_eh; @@ -6333,6 +6335,13 @@ static void ata_port_detach(struct ata_port *ap) cancel_delayed_work_sync(&ap->hotplug_task); skip_eh: + /* clean up zpodd on port removal */ + ata_for_each_link(link, ap, HOST_FIRST) { + ata_for_each_dev(dev, link, ALL) { + if (zpodd_dev_enabled(dev)) + zpodd_exit(dev); + } + } if (ap->pmp_link) { int i; for (i = 0; i < SATA_PMP_MAX_PORTS; i++) -- cgit v1.2.1 From b753631b3576bf343151a82513c5d56fcda1e24f Mon Sep 17 00:00:00 2001 From: Edward Lin Date: Wed, 7 May 2014 10:47:24 +0800 Subject: ACPI: blacklist win8 OSI for Dell Inspiron 7737 With win8 capabiltiy, the machine will boot itself immediately after shutdown command has executed. Work around this issue by disabling win8 capcability. This workaround also makes wireless hotkey work. Signed-off-by: Edward Lin Cc: All applicable Signed-off-by: Rafael J. Wysocki --- drivers/acpi/blacklist.c | 8 ++++++++ 1 file changed, 8 insertions(+) (limited to 'drivers') diff --git a/drivers/acpi/blacklist.c b/drivers/acpi/blacklist.c index afec4526c48a..4fc6cf53cd51 100644 --- a/drivers/acpi/blacklist.c +++ b/drivers/acpi/blacklist.c @@ -314,6 +314,14 @@ static struct dmi_system_id acpi_osi_dmi_table[] __initdata = { DMI_MATCH(DMI_PRODUCT_VERSION, "2349D15"), }, }, + { + .callback = dmi_disable_osi_win8, + .ident = "Dell Inspiron 7737", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."), + DMI_MATCH(DMI_PRODUCT_NAME, "Inspiron 7737"), + }, + }, /* * BIOS invocation of _OSI(Linux) is almost always a BIOS bug. -- cgit v1.2.1 From f6e6e1b9fee88c90586787b71dc49bb3ce62bb89 Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Mon, 5 May 2014 11:38:09 +0200 Subject: ACPI / blacklist: Add dmi_enable_osi_linux quirk for Asus EEE PC 1015PX Without this this EEE PC exports a non working WMI interface, with this it exports a working "good old" eeepc_laptop interface, fixing brightness control not working as well as rfkill being stuck in a permanent wireless blocked state. This is not an ideal way to fix this, but various attempts to fix this otherwise have failed, see: References: https://bugzilla.redhat.com/show_bug.cgi?id=1067181 Reported-and-tested-by: lou.cardone@gmail.com Signed-off-by: Hans de Goede Cc: All applicable Signed-off-by: Rafael J. Wysocki --- drivers/acpi/blacklist.c | 13 +++++++++++++ 1 file changed, 13 insertions(+) (limited to 'drivers') diff --git a/drivers/acpi/blacklist.c b/drivers/acpi/blacklist.c index 4fc6cf53cd51..3d8413d02a97 100644 --- a/drivers/acpi/blacklist.c +++ b/drivers/acpi/blacklist.c @@ -382,6 +382,19 @@ static struct dmi_system_id acpi_osi_dmi_table[] __initdata = { DMI_MATCH(DMI_PRODUCT_VERSION, "ThinkPad T500"), }, }, + /* + * Without this this EEEpc exports a non working WMI interface, with + * this it exports a working "good old" eeepc_laptop interface, fixing + * both brightness control, and rfkill not working. + */ + { + .callback = dmi_enable_osi_linux, + .ident = "Asus EEE PC 1015PX", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK Computer INC."), + DMI_MATCH(DMI_PRODUCT_NAME, "1015PX"), + }, + }, {} }; -- cgit v1.2.1 From 98012849e0cbf980326f8e34d571f4474866a88e Mon Sep 17 00:00:00 2001 From: Guenter Roeck Date: Tue, 6 May 2014 19:18:28 -0700 Subject: ACPI: Revert "ACPI / AC: convert ACPI ac driver to platform bus" Revert commit cc8ef5270734 (ACPI / AC: convert ACPI ac driver to platform bus) that is reported to break thermal management on MacBook Air 2013 with ArchLinux. Fixes: cc8ef5270734 (ACPI / AC: convert ACPI ac driver to platform bus) References: https://bugzilla.kernel.org/show_bug.cgi?id=71711 Cc: Zhang Rui Reported-and-tested-by: Manuel Krause Signed-off-by: Guenter Roeck Cc: 3.13+ # 3.13+ Signed-off-by: Rafael J. Wysocki --- drivers/acpi/ac.c | 117 +++++++++++++++++++++---------------------- drivers/acpi/acpi_platform.c | 1 - 2 files changed, 58 insertions(+), 60 deletions(-) (limited to 'drivers') diff --git a/drivers/acpi/ac.c b/drivers/acpi/ac.c index 2c01c1da29ce..c67f6f5ad611 100644 --- a/drivers/acpi/ac.c +++ b/drivers/acpi/ac.c @@ -52,11 +52,39 @@ MODULE_AUTHOR("Paul Diefenbaugh"); MODULE_DESCRIPTION("ACPI AC Adapter Driver"); MODULE_LICENSE("GPL"); +static int acpi_ac_add(struct acpi_device *device); +static int acpi_ac_remove(struct acpi_device *device); +static void acpi_ac_notify(struct acpi_device *device, u32 event); + +static const struct acpi_device_id ac_device_ids[] = { + {"ACPI0003", 0}, + {"", 0}, +}; +MODULE_DEVICE_TABLE(acpi, ac_device_ids); + +#ifdef CONFIG_PM_SLEEP +static int acpi_ac_resume(struct device *dev); +#endif +static SIMPLE_DEV_PM_OPS(acpi_ac_pm, NULL, acpi_ac_resume); + static int ac_sleep_before_get_state_ms; +static struct acpi_driver acpi_ac_driver = { + .name = "ac", + .class = ACPI_AC_CLASS, + .ids = ac_device_ids, + .flags = ACPI_DRIVER_ALL_NOTIFY_EVENTS, + .ops = { + .add = acpi_ac_add, + .remove = acpi_ac_remove, + .notify = acpi_ac_notify, + }, + .drv.pm = &acpi_ac_pm, +}; + struct acpi_ac { struct power_supply charger; - struct platform_device *pdev; + struct acpi_device * device; unsigned long long state; struct notifier_block battery_nb; }; @@ -69,10 +97,12 @@ struct acpi_ac { static int acpi_ac_get_state(struct acpi_ac *ac) { - acpi_status status; - acpi_handle handle = ACPI_HANDLE(&ac->pdev->dev); + acpi_status status = AE_OK; + + if (!ac) + return -EINVAL; - status = acpi_evaluate_integer(handle, "_PSR", NULL, + status = acpi_evaluate_integer(ac->device->handle, "_PSR", NULL, &ac->state); if (ACPI_FAILURE(status)) { ACPI_EXCEPTION((AE_INFO, status, @@ -117,10 +147,9 @@ static enum power_supply_property ac_props[] = { Driver Model -------------------------------------------------------------------------- */ -static void acpi_ac_notify_handler(acpi_handle handle, u32 event, void *data) +static void acpi_ac_notify(struct acpi_device *device, u32 event) { - struct acpi_ac *ac = data; - struct acpi_device *adev; + struct acpi_ac *ac = acpi_driver_data(device); if (!ac) return; @@ -143,11 +172,10 @@ static void acpi_ac_notify_handler(acpi_handle handle, u32 event, void *data) msleep(ac_sleep_before_get_state_ms); acpi_ac_get_state(ac); - adev = ACPI_COMPANION(&ac->pdev->dev); - acpi_bus_generate_netlink_event(adev->pnp.device_class, - dev_name(&ac->pdev->dev), - event, (u32) ac->state); - acpi_notifier_call_chain(adev, event, (u32) ac->state); + acpi_bus_generate_netlink_event(device->pnp.device_class, + dev_name(&device->dev), event, + (u32) ac->state); + acpi_notifier_call_chain(device, event, (u32) ac->state); kobject_uevent(&ac->charger.dev->kobj, KOBJ_CHANGE); } @@ -192,49 +220,39 @@ static struct dmi_system_id ac_dmi_table[] = { {}, }; -static int acpi_ac_probe(struct platform_device *pdev) +static int acpi_ac_add(struct acpi_device *device) { int result = 0; struct acpi_ac *ac = NULL; - struct acpi_device *adev; - if (!pdev) - return -EINVAL; - adev = ACPI_COMPANION(&pdev->dev); - if (!adev) - return -ENODEV; + if (!device) + return -EINVAL; ac = kzalloc(sizeof(struct acpi_ac), GFP_KERNEL); if (!ac) return -ENOMEM; - strcpy(acpi_device_name(adev), ACPI_AC_DEVICE_NAME); - strcpy(acpi_device_class(adev), ACPI_AC_CLASS); - ac->pdev = pdev; - platform_set_drvdata(pdev, ac); + ac->device = device; + strcpy(acpi_device_name(device), ACPI_AC_DEVICE_NAME); + strcpy(acpi_device_class(device), ACPI_AC_CLASS); + device->driver_data = ac; result = acpi_ac_get_state(ac); if (result) goto end; - ac->charger.name = acpi_device_bid(adev); + ac->charger.name = acpi_device_bid(device); ac->charger.type = POWER_SUPPLY_TYPE_MAINS; ac->charger.properties = ac_props; ac->charger.num_properties = ARRAY_SIZE(ac_props); ac->charger.get_property = get_ac_property; - result = power_supply_register(&pdev->dev, &ac->charger); + result = power_supply_register(&ac->device->dev, &ac->charger); if (result) goto end; - result = acpi_install_notify_handler(ACPI_HANDLE(&pdev->dev), - ACPI_ALL_NOTIFY, acpi_ac_notify_handler, ac); - if (result) { - power_supply_unregister(&ac->charger); - goto end; - } printk(KERN_INFO PREFIX "%s [%s] (%s)\n", - acpi_device_name(adev), acpi_device_bid(adev), + acpi_device_name(device), acpi_device_bid(device), ac->state ? "on-line" : "off-line"); ac->battery_nb.notifier_call = acpi_ac_battery_notify; @@ -256,7 +274,7 @@ static int acpi_ac_resume(struct device *dev) if (!dev) return -EINVAL; - ac = platform_get_drvdata(to_platform_device(dev)); + ac = acpi_driver_data(to_acpi_device(dev)); if (!ac) return -EINVAL; @@ -270,19 +288,17 @@ static int acpi_ac_resume(struct device *dev) #else #define acpi_ac_resume NULL #endif -static SIMPLE_DEV_PM_OPS(acpi_ac_pm_ops, NULL, acpi_ac_resume); -static int acpi_ac_remove(struct platform_device *pdev) +static int acpi_ac_remove(struct acpi_device *device) { - struct acpi_ac *ac; + struct acpi_ac *ac = NULL; + - if (!pdev) + if (!device || !acpi_driver_data(device)) return -EINVAL; - acpi_remove_notify_handler(ACPI_HANDLE(&pdev->dev), - ACPI_ALL_NOTIFY, acpi_ac_notify_handler); + ac = acpi_driver_data(device); - ac = platform_get_drvdata(pdev); if (ac->charger.dev) power_supply_unregister(&ac->charger); unregister_acpi_notifier(&ac->battery_nb); @@ -292,23 +308,6 @@ static int acpi_ac_remove(struct platform_device *pdev) return 0; } -static const struct acpi_device_id acpi_ac_match[] = { - { "ACPI0003", 0 }, - { } -}; -MODULE_DEVICE_TABLE(acpi, acpi_ac_match); - -static struct platform_driver acpi_ac_driver = { - .probe = acpi_ac_probe, - .remove = acpi_ac_remove, - .driver = { - .name = "acpi-ac", - .owner = THIS_MODULE, - .pm = &acpi_ac_pm_ops, - .acpi_match_table = ACPI_PTR(acpi_ac_match), - }, -}; - static int __init acpi_ac_init(void) { int result; @@ -316,7 +315,7 @@ static int __init acpi_ac_init(void) if (acpi_disabled) return -ENODEV; - result = platform_driver_register(&acpi_ac_driver); + result = acpi_bus_register_driver(&acpi_ac_driver); if (result < 0) return -ENODEV; @@ -325,7 +324,7 @@ static int __init acpi_ac_init(void) static void __exit acpi_ac_exit(void) { - platform_driver_unregister(&acpi_ac_driver); + acpi_bus_unregister_driver(&acpi_ac_driver); } module_init(acpi_ac_init); module_exit(acpi_ac_exit); diff --git a/drivers/acpi/acpi_platform.c b/drivers/acpi/acpi_platform.c index dbfe49e5fd63..1d4950388fa1 100644 --- a/drivers/acpi/acpi_platform.c +++ b/drivers/acpi/acpi_platform.c @@ -29,7 +29,6 @@ ACPI_MODULE_NAME("platform"); static const struct acpi_device_id acpi_platform_device_ids[] = { { "PNP0D40" }, - { "ACPI0003" }, { "VPC2004" }, { "BCM4752" }, -- cgit v1.2.1 From 98fcc5762dcecbb264fa4af5a9ae51136858e299 Mon Sep 17 00:00:00 2001 From: Micky Ching Date: Tue, 29 Apr 2014 09:54:54 +0800 Subject: mmc: rtsx: Revert "mmc: rtsx: add support for pre_req and post_req" This reverts commit c42deffd5b53c9e583d83c7964854ede2f12410d. commit did use mutex_unlock() in tasklet, but mutex_unlock() can't be used in tasklet(atomic context). The driver needs to use mutex to avoid concurrency, so we can't use tasklet here, the patch need to be removed. The spinlock host->lock and pcr->lock may deadlock, one way to solve the deadlock is remove host->lock in sd_isr_done_transfer(), but if using workqueue the we can avoid using the spinlock and also avoid the problem. Signed-off-by: Micky Ching Acked-by: Ulf Hansson Signed-off-by: Lee Jones --- drivers/mfd/rtsx_pcr.c | 132 ++++-------- drivers/mmc/host/rtsx_pci_sdmmc.c | 418 +++++++------------------------------- 2 files changed, 109 insertions(+), 441 deletions(-) (limited to 'drivers') diff --git a/drivers/mfd/rtsx_pcr.c b/drivers/mfd/rtsx_pcr.c index c9de3d598ea5..1d15735f9ef9 100644 --- a/drivers/mfd/rtsx_pcr.c +++ b/drivers/mfd/rtsx_pcr.c @@ -338,28 +338,58 @@ int rtsx_pci_transfer_data(struct rtsx_pcr *pcr, struct scatterlist *sglist, int num_sg, bool read, int timeout) { struct completion trans_done; - int err = 0, count; + u8 dir; + int err = 0, i, count; long timeleft; unsigned long flags; + struct scatterlist *sg; + enum dma_data_direction dma_dir; + u32 val; + dma_addr_t addr; + unsigned int len; + + dev_dbg(&(pcr->pci->dev), "--> %s: num_sg = %d\n", __func__, num_sg); + + /* don't transfer data during abort processing */ + if (pcr->remove_pci) + return -EINVAL; + + if ((sglist == NULL) || (num_sg <= 0)) + return -EINVAL; - count = rtsx_pci_dma_map_sg(pcr, sglist, num_sg, read); + if (read) { + dir = DEVICE_TO_HOST; + dma_dir = DMA_FROM_DEVICE; + } else { + dir = HOST_TO_DEVICE; + dma_dir = DMA_TO_DEVICE; + } + + count = dma_map_sg(&(pcr->pci->dev), sglist, num_sg, dma_dir); if (count < 1) { dev_err(&(pcr->pci->dev), "scatterlist map failed\n"); return -EINVAL; } dev_dbg(&(pcr->pci->dev), "DMA mapping count: %d\n", count); + val = ((u32)(dir & 0x01) << 29) | TRIG_DMA | ADMA_MODE; + pcr->sgi = 0; + for_each_sg(sglist, sg, count, i) { + addr = sg_dma_address(sg); + len = sg_dma_len(sg); + rtsx_pci_add_sg_tbl(pcr, addr, len, i == count - 1); + } spin_lock_irqsave(&pcr->lock, flags); pcr->done = &trans_done; pcr->trans_result = TRANS_NOT_READY; init_completion(&trans_done); + rtsx_pci_writel(pcr, RTSX_HDBAR, pcr->host_sg_tbl_addr); + rtsx_pci_writel(pcr, RTSX_HDBCTLR, val); spin_unlock_irqrestore(&pcr->lock, flags); - rtsx_pci_dma_transfer(pcr, sglist, count, read); - timeleft = wait_for_completion_interruptible_timeout( &trans_done, msecs_to_jiffies(timeout)); if (timeleft <= 0) { @@ -383,7 +413,7 @@ out: pcr->done = NULL; spin_unlock_irqrestore(&pcr->lock, flags); - rtsx_pci_dma_unmap_sg(pcr, sglist, num_sg, read); + dma_unmap_sg(&(pcr->pci->dev), sglist, num_sg, dma_dir); if ((err < 0) && (err != -ENODEV)) rtsx_pci_stop_cmd(pcr); @@ -395,73 +425,6 @@ out: } EXPORT_SYMBOL_GPL(rtsx_pci_transfer_data); -int rtsx_pci_dma_map_sg(struct rtsx_pcr *pcr, struct scatterlist *sglist, - int num_sg, bool read) -{ - enum dma_data_direction dir = read ? DMA_FROM_DEVICE : DMA_TO_DEVICE; - - if (pcr->remove_pci) - return -EINVAL; - - if ((sglist == NULL) || num_sg < 1) - return -EINVAL; - - return dma_map_sg(&(pcr->pci->dev), sglist, num_sg, dir); -} -EXPORT_SYMBOL_GPL(rtsx_pci_dma_map_sg); - -int rtsx_pci_dma_unmap_sg(struct rtsx_pcr *pcr, struct scatterlist *sglist, - int num_sg, bool read) -{ - enum dma_data_direction dir = read ? DMA_FROM_DEVICE : DMA_TO_DEVICE; - - if (pcr->remove_pci) - return -EINVAL; - - if (sglist == NULL || num_sg < 1) - return -EINVAL; - - dma_unmap_sg(&(pcr->pci->dev), sglist, num_sg, dir); - return num_sg; -} -EXPORT_SYMBOL_GPL(rtsx_pci_dma_unmap_sg); - -int rtsx_pci_dma_transfer(struct rtsx_pcr *pcr, struct scatterlist *sglist, - int sg_count, bool read) -{ - struct scatterlist *sg; - dma_addr_t addr; - unsigned int len; - int i; - u32 val; - u8 dir = read ? DEVICE_TO_HOST : HOST_TO_DEVICE; - unsigned long flags; - - if (pcr->remove_pci) - return -EINVAL; - - if ((sglist == NULL) || (sg_count < 1)) - return -EINVAL; - - val = ((u32)(dir & 0x01) << 29) | TRIG_DMA | ADMA_MODE; - pcr->sgi = 0; - for_each_sg(sglist, sg, sg_count, i) { - addr = sg_dma_address(sg); - len = sg_dma_len(sg); - rtsx_pci_add_sg_tbl(pcr, addr, len, i == sg_count - 1); - } - - spin_lock_irqsave(&pcr->lock, flags); - - rtsx_pci_writel(pcr, RTSX_HDBAR, pcr->host_sg_tbl_addr); - rtsx_pci_writel(pcr, RTSX_HDBCTLR, val); - - spin_unlock_irqrestore(&pcr->lock, flags); - - return 0; -} -EXPORT_SYMBOL_GPL(rtsx_pci_dma_transfer); - int rtsx_pci_read_ppbuf(struct rtsx_pcr *pcr, u8 *buf, int buf_len) { int err; @@ -873,8 +836,6 @@ static irqreturn_t rtsx_pci_isr(int irq, void *dev_id) int_reg = rtsx_pci_readl(pcr, RTSX_BIPR); /* Clear interrupt flag */ rtsx_pci_writel(pcr, RTSX_BIPR, int_reg); - dev_dbg(&pcr->pci->dev, "=========== BIPR 0x%8x ==========\n", int_reg); - if ((int_reg & pcr->bier) == 0) { spin_unlock(&pcr->lock); return IRQ_NONE; @@ -905,28 +866,17 @@ static irqreturn_t rtsx_pci_isr(int irq, void *dev_id) } if (int_reg & (NEED_COMPLETE_INT | DELINK_INT)) { - if (int_reg & (TRANS_FAIL_INT | DELINK_INT)) + if (int_reg & (TRANS_FAIL_INT | DELINK_INT)) { pcr->trans_result = TRANS_RESULT_FAIL; - else if (int_reg & TRANS_OK_INT) + if (pcr->done) + complete(pcr->done); + } else if (int_reg & TRANS_OK_INT) { pcr->trans_result = TRANS_RESULT_OK; - - if (pcr->done) - complete(pcr->done); - - if (int_reg & SD_EXIST) { - struct rtsx_slot *slot = &pcr->slots[RTSX_SD_CARD]; - if (slot && slot->done_transfer) - slot->done_transfer(slot->p_dev); - } - - if (int_reg & MS_EXIST) { - struct rtsx_slot *slot = &pcr->slots[RTSX_SD_CARD]; - if (slot && slot->done_transfer) - slot->done_transfer(slot->p_dev); + if (pcr->done) + complete(pcr->done); } } - if (pcr->card_inserted || pcr->card_removed) schedule_delayed_work(&pcr->carddet_work, msecs_to_jiffies(200)); diff --git a/drivers/mmc/host/rtsx_pci_sdmmc.c b/drivers/mmc/host/rtsx_pci_sdmmc.c index 5fb994f9a653..0b9ded13a3ae 100644 --- a/drivers/mmc/host/rtsx_pci_sdmmc.c +++ b/drivers/mmc/host/rtsx_pci_sdmmc.c @@ -31,28 +31,14 @@ #include #include -struct realtek_next { - unsigned int sg_count; - s32 cookie; -}; - struct realtek_pci_sdmmc { struct platform_device *pdev; struct rtsx_pcr *pcr; struct mmc_host *mmc; struct mmc_request *mrq; - struct mmc_command *cmd; - struct mmc_data *data; - - spinlock_t lock; - struct timer_list timer; - struct tasklet_struct cmd_tasklet; - struct tasklet_struct data_tasklet; - struct tasklet_struct finish_tasklet; - - u8 rsp_type; - u8 rsp_len; - int sg_count; + + struct mutex host_mutex; + u8 ssc_depth; unsigned int clock; bool vpclk; @@ -62,13 +48,8 @@ struct realtek_pci_sdmmc { int power_state; #define SDMMC_POWER_ON 1 #define SDMMC_POWER_OFF 0 - - struct realtek_next next_data; }; -static int sd_start_multi_rw(struct realtek_pci_sdmmc *host, - struct mmc_request *mrq); - static inline struct device *sdmmc_dev(struct realtek_pci_sdmmc *host) { return &(host->pdev->dev); @@ -105,95 +86,6 @@ static void sd_print_debug_regs(struct realtek_pci_sdmmc *host) #define sd_print_debug_regs(host) #endif /* DEBUG */ -static void sd_isr_done_transfer(struct platform_device *pdev) -{ - struct realtek_pci_sdmmc *host = platform_get_drvdata(pdev); - - spin_lock(&host->lock); - if (host->cmd) - tasklet_schedule(&host->cmd_tasklet); - if (host->data) - tasklet_schedule(&host->data_tasklet); - spin_unlock(&host->lock); -} - -static void sd_request_timeout(unsigned long host_addr) -{ - struct realtek_pci_sdmmc *host = (struct realtek_pci_sdmmc *)host_addr; - unsigned long flags; - - spin_lock_irqsave(&host->lock, flags); - - if (!host->mrq) { - dev_err(sdmmc_dev(host), "error: no request exist\n"); - goto out; - } - - if (host->cmd) - host->cmd->error = -ETIMEDOUT; - if (host->data) - host->data->error = -ETIMEDOUT; - - dev_dbg(sdmmc_dev(host), "timeout for request\n"); - -out: - tasklet_schedule(&host->finish_tasklet); - spin_unlock_irqrestore(&host->lock, flags); -} - -static void sd_finish_request(unsigned long host_addr) -{ - struct realtek_pci_sdmmc *host = (struct realtek_pci_sdmmc *)host_addr; - struct rtsx_pcr *pcr = host->pcr; - struct mmc_request *mrq; - struct mmc_command *cmd; - struct mmc_data *data; - unsigned long flags; - bool any_error; - - spin_lock_irqsave(&host->lock, flags); - - del_timer(&host->timer); - mrq = host->mrq; - if (!mrq) { - dev_err(sdmmc_dev(host), "error: no request need finish\n"); - goto out; - } - - cmd = mrq->cmd; - data = mrq->data; - - any_error = (mrq->sbc && mrq->sbc->error) || - (mrq->stop && mrq->stop->error) || - (cmd && cmd->error) || (data && data->error); - - if (any_error) { - rtsx_pci_stop_cmd(pcr); - sd_clear_error(host); - } - - if (data) { - if (any_error) - data->bytes_xfered = 0; - else - data->bytes_xfered = data->blocks * data->blksz; - - if (!data->host_cookie) - rtsx_pci_dma_unmap_sg(pcr, data->sg, data->sg_len, - data->flags & MMC_DATA_READ); - - } - - host->mrq = NULL; - host->cmd = NULL; - host->data = NULL; - -out: - spin_unlock_irqrestore(&host->lock, flags); - mutex_unlock(&pcr->pcr_mutex); - mmc_request_done(host->mmc, mrq); -} - static int sd_read_data(struct realtek_pci_sdmmc *host, u8 *cmd, u16 byte_cnt, u8 *buf, int buf_len, int timeout) { @@ -311,7 +203,8 @@ static int sd_write_data(struct realtek_pci_sdmmc *host, u8 *cmd, u16 byte_cnt, return 0; } -static void sd_send_cmd(struct realtek_pci_sdmmc *host, struct mmc_command *cmd) +static void sd_send_cmd_get_rsp(struct realtek_pci_sdmmc *host, + struct mmc_command *cmd) { struct rtsx_pcr *pcr = host->pcr; u8 cmd_idx = (u8)cmd->opcode; @@ -319,14 +212,11 @@ static void sd_send_cmd(struct realtek_pci_sdmmc *host, struct mmc_command *cmd) int err = 0; int timeout = 100; int i; + u8 *ptr; + int stat_idx = 0; u8 rsp_type; int rsp_len = 5; - unsigned long flags; - - if (host->cmd) - dev_err(sdmmc_dev(host), "error: cmd already exist\n"); - - host->cmd = cmd; + bool clock_toggled = false; dev_dbg(sdmmc_dev(host), "%s: SD/MMC CMD %d, arg = 0x%08x\n", __func__, cmd_idx, arg); @@ -361,8 +251,6 @@ static void sd_send_cmd(struct realtek_pci_sdmmc *host, struct mmc_command *cmd) err = -EINVAL; goto out; } - host->rsp_type = rsp_type; - host->rsp_len = rsp_len; if (rsp_type == SD_RSP_TYPE_R1b) timeout = 3000; @@ -372,6 +260,8 @@ static void sd_send_cmd(struct realtek_pci_sdmmc *host, struct mmc_command *cmd) 0xFF, SD_CLK_TOGGLE_EN); if (err < 0) goto out; + + clock_toggled = true; } rtsx_pci_init_cmd(pcr); @@ -395,60 +285,25 @@ static void sd_send_cmd(struct realtek_pci_sdmmc *host, struct mmc_command *cmd) /* Read data from ping-pong buffer */ for (i = PPBUF_BASE2; i < PPBUF_BASE2 + 16; i++) rtsx_pci_add_cmd(pcr, READ_REG_CMD, (u16)i, 0, 0); + stat_idx = 16; } else if (rsp_type != SD_RSP_TYPE_R0) { /* Read data from SD_CMDx registers */ for (i = SD_CMD0; i <= SD_CMD4; i++) rtsx_pci_add_cmd(pcr, READ_REG_CMD, (u16)i, 0, 0); + stat_idx = 5; } rtsx_pci_add_cmd(pcr, READ_REG_CMD, SD_STAT1, 0, 0); - mod_timer(&host->timer, jiffies + msecs_to_jiffies(timeout)); - - spin_lock_irqsave(&pcr->lock, flags); - pcr->trans_result = TRANS_NOT_READY; - rtsx_pci_send_cmd_no_wait(pcr); - spin_unlock_irqrestore(&pcr->lock, flags); - - return; - -out: - cmd->error = err; - tasklet_schedule(&host->finish_tasklet); -} - -static void sd_get_rsp(unsigned long host_addr) -{ - struct realtek_pci_sdmmc *host = (struct realtek_pci_sdmmc *)host_addr; - struct rtsx_pcr *pcr = host->pcr; - struct mmc_command *cmd; - int i, err = 0, stat_idx; - u8 *ptr, rsp_type; - unsigned long flags; - - spin_lock_irqsave(&host->lock, flags); - - cmd = host->cmd; - host->cmd = NULL; - - if (!cmd) { - dev_err(sdmmc_dev(host), "error: cmd not exist\n"); + err = rtsx_pci_send_cmd(pcr, timeout); + if (err < 0) { + sd_print_debug_regs(host); + sd_clear_error(host); + dev_dbg(sdmmc_dev(host), + "rtsx_pci_send_cmd error (err = %d)\n", err); goto out; } - spin_lock(&pcr->lock); - if (pcr->trans_result == TRANS_NO_DEVICE) - err = -ENODEV; - else if (pcr->trans_result != TRANS_RESULT_OK) - err = -EINVAL; - spin_unlock(&pcr->lock); - - if (err < 0) - goto out; - - rsp_type = host->rsp_type; - stat_idx = host->rsp_len; - if (rsp_type == SD_RSP_TYPE_R0) { err = 0; goto out; @@ -485,106 +340,26 @@ static void sd_get_rsp(unsigned long host_addr) cmd->resp[0]); } - if (cmd == host->mrq->sbc) { - sd_send_cmd(host, host->mrq->cmd); - spin_unlock_irqrestore(&host->lock, flags); - return; - } - - if (cmd == host->mrq->stop) - goto out; - - if (cmd->data) { - sd_start_multi_rw(host, host->mrq); - spin_unlock_irqrestore(&host->lock, flags); - return; - } - out: cmd->error = err; - tasklet_schedule(&host->finish_tasklet); - spin_unlock_irqrestore(&host->lock, flags); -} - -static int sd_pre_dma_transfer(struct realtek_pci_sdmmc *host, - struct mmc_data *data, struct realtek_next *next) -{ - struct rtsx_pcr *pcr = host->pcr; - int read = data->flags & MMC_DATA_READ; - int sg_count = 0; - - if (!next && data->host_cookie && - data->host_cookie != host->next_data.cookie) { - dev_err(sdmmc_dev(host), - "error: invalid cookie data[%d] host[%d]\n", - data->host_cookie, host->next_data.cookie); - data->host_cookie = 0; - } - - if (next || (!next && data->host_cookie != host->next_data.cookie)) - sg_count = rtsx_pci_dma_map_sg(pcr, - data->sg, data->sg_len, read); - else - sg_count = host->next_data.sg_count; - - if (next) { - next->sg_count = sg_count; - if (++next->cookie < 0) - next->cookie = 1; - data->host_cookie = next->cookie; - } - - return sg_count; -} - -static void sdmmc_pre_req(struct mmc_host *mmc, struct mmc_request *mrq, - bool is_first_req) -{ - struct realtek_pci_sdmmc *host = mmc_priv(mmc); - struct mmc_data *data = mrq->data; - - if (data->host_cookie) { - dev_err(sdmmc_dev(host), - "error: descard already cookie data[%d]\n", - data->host_cookie); - data->host_cookie = 0; - } - - dev_dbg(sdmmc_dev(host), "dma sg prepared: %d\n", - sd_pre_dma_transfer(host, data, &host->next_data)); -} - -static void sdmmc_post_req(struct mmc_host *mmc, struct mmc_request *mrq, - int err) -{ - struct realtek_pci_sdmmc *host = mmc_priv(mmc); - struct rtsx_pcr *pcr = host->pcr; - struct mmc_data *data = mrq->data; - int read = data->flags & MMC_DATA_READ; - - rtsx_pci_dma_unmap_sg(pcr, data->sg, data->sg_len, read); - data->host_cookie = 0; + if (err && clock_toggled) + rtsx_pci_write_register(pcr, SD_BUS_STAT, + SD_CLK_TOGGLE_EN | SD_CLK_FORCE_STOP, 0); } -static int sd_start_multi_rw(struct realtek_pci_sdmmc *host, - struct mmc_request *mrq) +static int sd_rw_multi(struct realtek_pci_sdmmc *host, struct mmc_request *mrq) { struct rtsx_pcr *pcr = host->pcr; struct mmc_host *mmc = host->mmc; struct mmc_card *card = mmc->card; struct mmc_data *data = mrq->data; int uhs = mmc_card_uhs(card); - int read = data->flags & MMC_DATA_READ; + int read = (data->flags & MMC_DATA_READ) ? 1 : 0; u8 cfg2, trans_mode; int err; size_t data_len = data->blksz * data->blocks; - if (host->data) - dev_err(sdmmc_dev(host), "error: data already exist\n"); - - host->data = data; - if (read) { cfg2 = SD_CALCULATE_CRC7 | SD_CHECK_CRC16 | SD_NO_WAIT_BUSY_END | SD_CHECK_CRC7 | SD_RSP_LEN_0; @@ -635,54 +410,15 @@ static int sd_start_multi_rw(struct realtek_pci_sdmmc *host, rtsx_pci_add_cmd(pcr, CHECK_REG_CMD, SD_TRANSFER, SD_TRANSFER_END, SD_TRANSFER_END); - mod_timer(&host->timer, jiffies + 10 * HZ); rtsx_pci_send_cmd_no_wait(pcr); - err = rtsx_pci_dma_transfer(pcr, data->sg, host->sg_count, read); - if (err < 0) { - data->error = err; - tasklet_schedule(&host->finish_tasklet); - } - return 0; -} - -static void sd_finish_multi_rw(unsigned long host_addr) -{ - struct realtek_pci_sdmmc *host = (struct realtek_pci_sdmmc *)host_addr; - struct rtsx_pcr *pcr = host->pcr; - struct mmc_data *data; - int err = 0; - unsigned long flags; - - spin_lock_irqsave(&host->lock, flags); - - if (!host->data) { - dev_err(sdmmc_dev(host), "error: no data exist\n"); - goto out; - } - - data = host->data; - host->data = NULL; - - if (pcr->trans_result == TRANS_NO_DEVICE) - err = -ENODEV; - else if (pcr->trans_result != TRANS_RESULT_OK) - err = -EINVAL; - + err = rtsx_pci_transfer_data(pcr, data->sg, data->sg_len, read, 10000); if (err < 0) { - data->error = err; - goto out; - } - - if (!host->mrq->sbc && data->stop) { - sd_send_cmd(host, data->stop); - spin_unlock_irqrestore(&host->lock, flags); - return; + sd_clear_error(host); + return err; } -out: - tasklet_schedule(&host->finish_tasklet); - spin_unlock_irqrestore(&host->lock, flags); + return 0; } static inline void sd_enable_initial_mode(struct realtek_pci_sdmmc *host) @@ -901,13 +637,6 @@ static int sd_tuning_rx(struct realtek_pci_sdmmc *host, u8 opcode) return 0; } -static inline bool sd_use_muti_rw(struct mmc_command *cmd) -{ - return mmc_op_multi(cmd->opcode) || - (cmd->opcode == MMC_READ_SINGLE_BLOCK) || - (cmd->opcode == MMC_WRITE_BLOCK); -} - static void sdmmc_request(struct mmc_host *mmc, struct mmc_request *mrq) { struct realtek_pci_sdmmc *host = mmc_priv(mmc); @@ -916,14 +645,6 @@ static void sdmmc_request(struct mmc_host *mmc, struct mmc_request *mrq) struct mmc_data *data = mrq->data; unsigned int data_size = 0; int err; - unsigned long flags; - - mutex_lock(&pcr->pcr_mutex); - spin_lock_irqsave(&host->lock, flags); - - if (host->mrq) - dev_err(sdmmc_dev(host), "error: request already exist\n"); - host->mrq = mrq; if (host->eject) { cmd->error = -ENOMEDIUM; @@ -936,6 +657,8 @@ static void sdmmc_request(struct mmc_host *mmc, struct mmc_request *mrq) goto finish; } + mutex_lock(&pcr->pcr_mutex); + rtsx_pci_start_run(pcr); rtsx_pci_switch_clock(pcr, host->clock, host->ssc_depth, @@ -944,28 +667,46 @@ static void sdmmc_request(struct mmc_host *mmc, struct mmc_request *mrq) rtsx_pci_write_register(pcr, CARD_SHARE_MODE, CARD_SHARE_MASK, CARD_SHARE_48_SD); + mutex_lock(&host->host_mutex); + host->mrq = mrq; + mutex_unlock(&host->host_mutex); + if (mrq->data) data_size = data->blocks * data->blksz; - if (sd_use_muti_rw(cmd)) - host->sg_count = sd_pre_dma_transfer(host, data, NULL); + if (!data_size || mmc_op_multi(cmd->opcode) || + (cmd->opcode == MMC_READ_SINGLE_BLOCK) || + (cmd->opcode == MMC_WRITE_BLOCK)) { + sd_send_cmd_get_rsp(host, cmd); - if (!data_size || sd_use_muti_rw(cmd)) { - if (mrq->sbc) - sd_send_cmd(host, mrq->sbc); - else - sd_send_cmd(host, cmd); - spin_unlock_irqrestore(&host->lock, flags); + if (!cmd->error && data_size) { + sd_rw_multi(host, mrq); + + if (mmc_op_multi(cmd->opcode) && mrq->stop) + sd_send_cmd_get_rsp(host, mrq->stop); + } } else { - spin_unlock_irqrestore(&host->lock, flags); sd_normal_rw(host, mrq); - tasklet_schedule(&host->finish_tasklet); } - return; + + if (mrq->data) { + if (cmd->error || data->error) + data->bytes_xfered = 0; + else + data->bytes_xfered = data->blocks * data->blksz; + } + + mutex_unlock(&pcr->pcr_mutex); finish: - tasklet_schedule(&host->finish_tasklet); - spin_unlock_irqrestore(&host->lock, flags); + if (cmd->error) + dev_dbg(sdmmc_dev(host), "cmd->error = %d\n", cmd->error); + + mutex_lock(&host->host_mutex); + host->mrq = NULL; + mutex_unlock(&host->host_mutex); + + mmc_request_done(mmc, mrq); } static int sd_set_bus_width(struct realtek_pci_sdmmc *host, @@ -1400,8 +1141,6 @@ out: } static const struct mmc_host_ops realtek_pci_sdmmc_ops = { - .pre_req = sdmmc_pre_req, - .post_req = sdmmc_post_req, .request = sdmmc_request, .set_ios = sdmmc_set_ios, .get_ro = sdmmc_get_ro, @@ -1465,7 +1204,6 @@ static int rtsx_pci_sdmmc_drv_probe(struct platform_device *pdev) struct realtek_pci_sdmmc *host; struct rtsx_pcr *pcr; struct pcr_handle *handle = pdev->dev.platform_data; - unsigned long host_addr; if (!handle) return -ENXIO; @@ -1489,15 +1227,8 @@ static int rtsx_pci_sdmmc_drv_probe(struct platform_device *pdev) pcr->slots[RTSX_SD_CARD].p_dev = pdev; pcr->slots[RTSX_SD_CARD].card_event = rtsx_pci_sdmmc_card_event; - host_addr = (unsigned long)host; - host->next_data.cookie = 1; - setup_timer(&host->timer, sd_request_timeout, host_addr); - tasklet_init(&host->cmd_tasklet, sd_get_rsp, host_addr); - tasklet_init(&host->data_tasklet, sd_finish_multi_rw, host_addr); - tasklet_init(&host->finish_tasklet, sd_finish_request, host_addr); - spin_lock_init(&host->lock); + mutex_init(&host->host_mutex); - pcr->slots[RTSX_SD_CARD].done_transfer = sd_isr_done_transfer; realtek_init_host(host); mmc_add_host(mmc); @@ -1510,8 +1241,6 @@ static int rtsx_pci_sdmmc_drv_remove(struct platform_device *pdev) struct realtek_pci_sdmmc *host = platform_get_drvdata(pdev); struct rtsx_pcr *pcr; struct mmc_host *mmc; - struct mmc_request *mrq; - unsigned long flags; if (!host) return 0; @@ -1519,33 +1248,22 @@ static int rtsx_pci_sdmmc_drv_remove(struct platform_device *pdev) pcr = host->pcr; pcr->slots[RTSX_SD_CARD].p_dev = NULL; pcr->slots[RTSX_SD_CARD].card_event = NULL; - pcr->slots[RTSX_SD_CARD].done_transfer = NULL; mmc = host->mmc; - mrq = host->mrq; - spin_lock_irqsave(&host->lock, flags); + mutex_lock(&host->host_mutex); if (host->mrq) { dev_dbg(&(pdev->dev), "%s: Controller removed during transfer\n", mmc_hostname(mmc)); - if (mrq->sbc) - mrq->sbc->error = -ENOMEDIUM; - if (mrq->cmd) - mrq->cmd->error = -ENOMEDIUM; - if (mrq->stop) - mrq->stop->error = -ENOMEDIUM; - if (mrq->data) - mrq->data->error = -ENOMEDIUM; + rtsx_pci_complete_unfinished_transfer(pcr); - tasklet_schedule(&host->finish_tasklet); + host->mrq->cmd->error = -ENOMEDIUM; + if (host->mrq->stop) + host->mrq->stop->error = -ENOMEDIUM; + mmc_request_done(mmc, host->mrq); } - spin_unlock_irqrestore(&host->lock, flags); - - del_timer_sync(&host->timer); - tasklet_kill(&host->cmd_tasklet); - tasklet_kill(&host->data_tasklet); - tasklet_kill(&host->finish_tasklet); + mutex_unlock(&host->host_mutex); mmc_remove_host(mmc); host->eject = true; -- cgit v1.2.1 From 0b9d46dd7debf8e6dc8614106f1c1909fa8de64d Mon Sep 17 00:00:00 2001 From: Igor Mammedov Date: Mon, 5 May 2014 22:49:49 +0200 Subject: ACPI / processor: do not mark present at boot but not onlined CPU as onlined acpi_processor_add() assumes that present at boot CPUs are always onlined, it is not so if a CPU failed to become onlined. As result acpi_processor_add() will mark such CPU device as onlined in sysfs and following attempts to online/offline it using /sys/device/system/cpu/cpuX/online attribute will fail. Do not poke into device internals in acpi_processor_add() and touch "struct device { .offline }" attribute, since for CPUs onlined at boot it's set by: topology_init() -> arch_register_cpu() -> register_cpu() before ACPI device tree is parsed, and for hotplugged CPUs it's set when userspace onlines CPU via sysfs. Signed-off-by: Igor Mammedov Acked-by: Toshi Kani Cc: 3.11+ # 3.11+ Signed-off-by: Rafael J. Wysocki --- drivers/acpi/acpi_processor.c | 1 - 1 file changed, 1 deletion(-) (limited to 'drivers') diff --git a/drivers/acpi/acpi_processor.c b/drivers/acpi/acpi_processor.c index b06f5f55ada9..52c81c49cc7d 100644 --- a/drivers/acpi/acpi_processor.c +++ b/drivers/acpi/acpi_processor.c @@ -405,7 +405,6 @@ static int acpi_processor_add(struct acpi_device *device, goto err; pr->dev = dev; - dev->offline = pr->flags.need_hotplug_init; /* Trigger the processor driver's .probe() if present. */ if (device_attach(dev) >= 0) -- cgit v1.2.1 From 2af89a3cde1beb88a2c65e0558d828c1a9e4677f Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Thu, 8 May 2014 16:56:21 +0200 Subject: ata: pata_at91 only works on sam9 The smc driver used by pata_at91 is at91sam9 specific, so building this driver on another at91 platform results in this error: ERROR: "sam9_smc_configure" [drivers/ata/pata_at91.ko] undefined! ERROR: "sam9_smc_write_mode" [drivers/ata/pata_at91.ko] undefined! ERROR: "sam9_smc_read_mode" [drivers/ata/pata_at91.ko] undefined! This patch changes the Kconfig dependency to ensure it always works. Signed-off-by: Arnd Bergmann Signed-off-by: Tejun Heo Cc: linux-ide@vger.kernel.org Cc: Jean-Christophe Plagniol-Villard Cc: Nicolas Ferre --- drivers/ata/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/ata/Kconfig b/drivers/ata/Kconfig index c2706047337f..0033fafc470b 100644 --- a/drivers/ata/Kconfig +++ b/drivers/ata/Kconfig @@ -815,7 +815,7 @@ config PATA_AT32 config PATA_AT91 tristate "PATA support for AT91SAM9260" - depends on ARM && ARCH_AT91 + depends on ARM && SOC_AT91SAM9 help This option enables support for IDE devices on the Atmel AT91SAM9260 SoC. -- cgit v1.2.1 From a7008ee1a423720e755e08f33b63669795c1f072 Mon Sep 17 00:00:00 2001 From: Vincent Donnefort Date: Tue, 15 Apr 2014 14:21:43 +0200 Subject: gpio: ich: set regs and reglen for i3100 and ich6 chipset This patch fixes kernel NULL pointer BUG introduced by the following commit: b667cf488aa9476b0ab64acd91f2a96f188cfd21 gpio: ich: Add support for multiple register addresses. Signed-off-by: Vincent Donnefort Tested-by: Eric Paris Signed-off-by: Linus Walleij --- drivers/gpio/gpio-ich.c | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'drivers') diff --git a/drivers/gpio/gpio-ich.c b/drivers/gpio/gpio-ich.c index e73c6755a5eb..70304220a479 100644 --- a/drivers/gpio/gpio-ich.c +++ b/drivers/gpio/gpio-ich.c @@ -305,6 +305,8 @@ static struct ichx_desc ich6_desc = { .ngpio = 50, .have_blink = true, + .regs = ichx_regs, + .reglen = ichx_reglen, }; /* Intel 3100 */ @@ -324,6 +326,8 @@ static struct ichx_desc i3100_desc = { .uses_gpe0 = true, .ngpio = 50, + .regs = ichx_regs, + .reglen = ichx_reglen, }; /* ICH7 and ICH8-based */ -- cgit v1.2.1 From 99e4b98dbe3ad1fe38a74d12c3b8d44a55930de4 Mon Sep 17 00:00:00 2001 From: Michael Welling Date: Wed, 16 Apr 2014 20:00:24 -0500 Subject: gpio: mcp23s08: Bug fix of SPI device tree registration. The chips variable needs to be incremented for each chip that is found in the spi_present_mask when registering via device tree. Without this and the checking a negative index is passed to the data->chip array in a subsequent loop. Cc: stable@vger.kernel.org Signed-off-by: Michael Welling Acked-by: Peter Korsgaard Signed-off-by: Linus Walleij --- drivers/gpio/gpio-mcp23s08.c | 12 +++++++----- 1 file changed, 7 insertions(+), 5 deletions(-) (limited to 'drivers') diff --git a/drivers/gpio/gpio-mcp23s08.c b/drivers/gpio/gpio-mcp23s08.c index 99a68310e7c0..3d53fd6880d1 100644 --- a/drivers/gpio/gpio-mcp23s08.c +++ b/drivers/gpio/gpio-mcp23s08.c @@ -894,9 +894,11 @@ static int mcp23s08_probe(struct spi_device *spi) dev_err(&spi->dev, "invalid spi-present-mask\n"); return -ENODEV; } - - for (addr = 0; addr < ARRAY_SIZE(pdata->chip); addr++) + for (addr = 0; addr < ARRAY_SIZE(pdata->chip); addr++) { + if ((spi_present_mask & (1 << addr))) + chips++; pullups[addr] = 0; + } } else { type = spi_get_device_id(spi)->driver_data; pdata = dev_get_platdata(&spi->dev); @@ -919,12 +921,12 @@ static int mcp23s08_probe(struct spi_device *spi) pullups[addr] = pdata->chip[addr].pullups; } - if (!chips) - return -ENODEV; - base = pdata->base; } + if (!chips) + return -ENODEV; + data = kzalloc(sizeof(*data) + chips * sizeof(struct mcp23s08), GFP_KERNEL); if (!data) -- cgit v1.2.1 From 05adaf1f101f25f40f12c29403e6488f0e45f6b6 Mon Sep 17 00:00:00 2001 From: Jani Nikula Date: Fri, 9 May 2014 14:52:34 +0300 Subject: drm/i915/vlv: reset VLV media force wake request register Media force wake get hangs the machine when the system is booted without displays attached. The assumption is that (at least some versions of) the firmware has skipped some initialization in that case. Empirical evidence suggests we need to reset the media force wake request register in addition to the render one to avoid hangs. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=75895 Reported-by: Imre Deak Reported-by: Darren Hart Tested-by: Darren Hart Reviewed-by: Mika Kuoppala Cc: stable@vger.kernel.org Signed-off-by: Jani Nikula --- drivers/gpu/drm/i915/intel_uncore.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'drivers') diff --git a/drivers/gpu/drm/i915/intel_uncore.c b/drivers/gpu/drm/i915/intel_uncore.c index f729dc71d5be..d0c75779d3f6 100644 --- a/drivers/gpu/drm/i915/intel_uncore.c +++ b/drivers/gpu/drm/i915/intel_uncore.c @@ -185,6 +185,8 @@ static void vlv_force_wake_reset(struct drm_i915_private *dev_priv) { __raw_i915_write32(dev_priv, FORCEWAKE_VLV, _MASKED_BIT_DISABLE(0xffff)); + __raw_i915_write32(dev_priv, FORCEWAKE_MEDIA_VLV, + _MASKED_BIT_DISABLE(0xffff)); /* something from same cacheline, but !FORCEWAKE_VLV */ __raw_posting_read(dev_priv, FORCEWAKE_ACK_VLV); } -- cgit v1.2.1 From 3afcb96fee9ba33ce838f2ceaa248358cffe2f56 Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Sat, 10 May 2014 13:51:36 +0200 Subject: ACPI / proc: Do not say when /proc interfaces will be deleted in Kconfig Do not tell people in the Kconfig help when exactly we are going to remove the deprecated ACPI interfaces in /proc, because, honestly, we don't know. We will remove them when they are not used any more. In particular, do not tell them that the interfaces will be removed in a kernel release that already happened long ago. Signed-off-by: Rafael J. Wysocki --- drivers/acpi/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/acpi/Kconfig b/drivers/acpi/Kconfig index c0160bb451e9..a34a22841002 100644 --- a/drivers/acpi/Kconfig +++ b/drivers/acpi/Kconfig @@ -60,7 +60,7 @@ config ACPI_PROCFS_POWER This option has no effect on /proc/acpi/ directories and functions, which do not yet exist in /sys This option, together with the proc directories, will be - deleted in 2.6.39. + deleted in the future. Say N to delete power /proc/acpi/ directories that have moved to /sys/ -- cgit v1.2.1 From 282cba6b00a95f0277ed71551e3f6b0477e8836b Mon Sep 17 00:00:00 2001 From: Heiko Stuebner Date: Fri, 9 May 2014 15:36:57 -0700 Subject: drivers/rtc/rtc-hym8563.c: set uie_unsupported The alarm of the hym8563 only supports a minute accuracy, while the uie wants an alarm one second in the future. Therefore things like the select() syscall will fail with a timeout, because the next alarm will happen in a worst case of 60 seconds. Signed-off-by: Heiko Stuebner Cc: Alessandro Zummo Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/rtc/rtc-hym8563.c | 3 +++ 1 file changed, 3 insertions(+) (limited to 'drivers') diff --git a/drivers/rtc/rtc-hym8563.c b/drivers/rtc/rtc-hym8563.c index bd628a6f981d..e5f13c4310fe 100644 --- a/drivers/rtc/rtc-hym8563.c +++ b/drivers/rtc/rtc-hym8563.c @@ -569,6 +569,9 @@ static int hym8563_probe(struct i2c_client *client, if (IS_ERR(hym8563->rtc)) return PTR_ERR(hym8563->rtc); + /* the hym8563 alarm only supports a minute accuracy */ + hym8563->rtc->uie_unsupported = 1; + #ifdef CONFIG_COMMON_CLK hym8563_clkout_register_clk(hym8563); #endif -- cgit v1.2.1 From f759546498d820670934c901a2fdf1ce948d2e5c Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Mon, 12 May 2014 01:13:28 +0200 Subject: ACPI / TPM: Fix resume regression on Chromebooks Chromebooks (at least Acer C720 and Pixel) implement an ACPI object for TPM, but don't implement the _DSM method to support PPI. As a result, the TPM driver fails to load on those machines after commit 1569a4c4ceba (ACPI / TPM: detect PPI features by checking availability of _DSM functions) which causes them to fail to resume from system suspend, becuase they require the TPM hardware to be put into the right state during resume and the TPM driver is necessary for that. Fix the problem by making tpm_add_ppi() return 0 when tpm_ppi_handle is still NULL after walking the ACPI namespace in search for the PPI _DSM, which allows the TPM driver to load and operate the hardware (during system resume in particular), but avoid creating the PPI sysfs group in that case. This change is based on a prototype patch from Jiang Liu. Fixes: 1569a4c4ceba (ACPI / TPM: detect PPI features by checking availability of _DSM functions) References: https://bugzilla.kernel.org/show_bug.cgi?id=74021 Reported-by: James Duley Reported-by: Phillip Dixon Tested-by: Brandon Casey Cc: 3.14+ # 3.14+ Signed-off-by: Rafael J. Wysocki --- drivers/char/tpm/tpm_ppi.c | 8 +++----- 1 file changed, 3 insertions(+), 5 deletions(-) (limited to 'drivers') diff --git a/drivers/char/tpm/tpm_ppi.c b/drivers/char/tpm/tpm_ppi.c index b3ea223585bd..61dcc8011ec7 100644 --- a/drivers/char/tpm/tpm_ppi.c +++ b/drivers/char/tpm/tpm_ppi.c @@ -328,13 +328,11 @@ int tpm_add_ppi(struct kobject *parent) /* Cache TPM ACPI handle and version string */ acpi_walk_namespace(ACPI_TYPE_DEVICE, ACPI_ROOT_OBJECT, ACPI_UINT32_MAX, ppi_callback, NULL, NULL, &tpm_ppi_handle); - if (tpm_ppi_handle == NULL) - return -ENODEV; - - return sysfs_create_group(parent, &ppi_attr_grp); + return tpm_ppi_handle ? sysfs_create_group(parent, &ppi_attr_grp) : 0; } void tpm_remove_ppi(struct kobject *parent) { - sysfs_remove_group(parent, &ppi_attr_grp); + if (tpm_ppi_handle) + sysfs_remove_group(parent, &ppi_attr_grp); } -- cgit v1.2.1 From 21855ff5bcbdd075e1c99772827a84912ab083dd Mon Sep 17 00:00:00 2001 From: Dirk Brandewie Date: Thu, 8 May 2014 12:57:23 -0700 Subject: intel_pstate: Set turbo VID for BayTrail A documentation update exposed that there is a separate set of VID values that must be used in the turbo/boost P state range. Add enumerating and setting the correct VID for P states in the turbo range. Cc: v3.13+ # v3.13+ Signed-off-by: Dirk Brandewie Signed-off-by: Rafael J. Wysocki --- drivers/cpufreq/intel_pstate.c | 21 +++++++++++++++------ 1 file changed, 15 insertions(+), 6 deletions(-) (limited to 'drivers') diff --git a/drivers/cpufreq/intel_pstate.c b/drivers/cpufreq/intel_pstate.c index 099967302bf2..39c4f8520848 100644 --- a/drivers/cpufreq/intel_pstate.c +++ b/drivers/cpufreq/intel_pstate.c @@ -37,6 +37,7 @@ #define BYT_RATIOS 0x66a #define BYT_VIDS 0x66b #define BYT_TURBO_RATIOS 0x66c +#define BYT_TURBO_VIDS 0x66d #define FRAC_BITS 6 @@ -70,8 +71,9 @@ struct pstate_data { }; struct vid_data { - int32_t min; - int32_t max; + int min; + int max; + int turbo; int32_t ratio; }; @@ -359,14 +361,14 @@ static int byt_get_min_pstate(void) { u64 value; rdmsrl(BYT_RATIOS, value); - return (value >> 8) & 0xFF; + return (value >> 8) & 0x3F; } static int byt_get_max_pstate(void) { u64 value; rdmsrl(BYT_RATIOS, value); - return (value >> 16) & 0xFF; + return (value >> 16) & 0x3F; } static int byt_get_turbo_pstate(void) @@ -393,6 +395,9 @@ static void byt_set_pstate(struct cpudata *cpudata, int pstate) vid_fp = clamp_t(int32_t, vid_fp, cpudata->vid.min, cpudata->vid.max); vid = fp_toint(vid_fp); + if (pstate > cpudata->pstate.max_pstate) + vid = cpudata->vid.turbo; + val |= vid; wrmsrl(MSR_IA32_PERF_CTL, val); @@ -402,13 +407,17 @@ static void byt_get_vid(struct cpudata *cpudata) { u64 value; + rdmsrl(BYT_VIDS, value); - cpudata->vid.min = int_tofp((value >> 8) & 0x7f); - cpudata->vid.max = int_tofp((value >> 16) & 0x7f); + cpudata->vid.min = int_tofp((value >> 8) & 0x3f); + cpudata->vid.max = int_tofp((value >> 16) & 0x3f); cpudata->vid.ratio = div_fp( cpudata->vid.max - cpudata->vid.min, int_tofp(cpudata->pstate.max_pstate - cpudata->pstate.min_pstate)); + + rdmsrl(BYT_TURBO_VIDS, value); + cpudata->vid.turbo = value & 0x7f; } -- cgit v1.2.1 From 3c90c55dcde745bed81f6447f24ba96bda43d984 Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Tue, 6 May 2014 23:26:19 +0200 Subject: drivers: sh: compile drivers/sh/pm_runtime.c if ARCH_SHMOBILE_MULTI If the kernel is built to support multi-ARM configuration with shmobile support built in, then drivers/sh is not built. This contains the PM runtime code in drivers/sh/pm_runtime.c, which implicitly enables the module clocks for all devices, and thus is quite essential. Without this, the state of clocks depends on implicit reset state, or on the bootloader. If ARCH_SHMOBILE_MULTI then build the drivers/sh directory, but ensure that bits that may conflict (drivers/sh/clk if the common clock framework is enabled) or are not used (drivers/sh/intc), are not built. Also, only enable the PM runtime code when actually running on a shmobile SoCs that needs it. ARCH_SHMOBILE_MULTI was added a while ago by commit efacfce5f8a523457e9419a25d52fe39db00b26a ("ARM: shmobile: Introduce ARCH_SHMOBILE_MULTI"), but drivers/sh was compiled for both ARCH_SHMOBILE_LEGACY and ARCH_SHMOBILE_MULTI until commit bf98c1eac1d4a6bcf00532e4fa41d8126cd6c187 ("ARM: Rename ARCH_SHMOBILE to ARCH_SHMOBILE_LEGACY"). Inspired by a patch from Ben Dooks . Signed-off-by: Geert Uytterhoeven Signed-off-by: Simon Horman --- drivers/Makefile | 2 +- drivers/sh/Makefile | 14 ++++++++------ drivers/sh/pm_runtime.c | 20 +++++++++++++++++++- 3 files changed, 28 insertions(+), 8 deletions(-) (limited to 'drivers') diff --git a/drivers/Makefile b/drivers/Makefile index e3ced91b1784..c033798f300a 100644 --- a/drivers/Makefile +++ b/drivers/Makefile @@ -119,7 +119,7 @@ obj-$(CONFIG_SGI_SN) += sn/ obj-y += firmware/ obj-$(CONFIG_CRYPTO) += crypto/ obj-$(CONFIG_SUPERH) += sh/ -obj-$(CONFIG_ARCH_SHMOBILE_LEGACY) += sh/ +obj-$(CONFIG_ARCH_SHMOBILE) += sh/ ifndef CONFIG_ARCH_USES_GETTIMEOFFSET obj-y += clocksource/ endif diff --git a/drivers/sh/Makefile b/drivers/sh/Makefile index fc67f564f02c..788ed9b59b4e 100644 --- a/drivers/sh/Makefile +++ b/drivers/sh/Makefile @@ -1,10 +1,12 @@ # # Makefile for the SuperH specific drivers. # -obj-y := intc/ +obj-$(CONFIG_SUPERH) += intc/ +obj-$(CONFIG_ARCH_SHMOBILE_LEGACY) += intc/ +ifneq ($(CONFIG_COMMON_CLK),y) +obj-$(CONFIG_HAVE_CLK) += clk/ +endif +obj-$(CONFIG_MAPLE) += maple/ +obj-$(CONFIG_SUPERHYWAY) += superhyway/ -obj-$(CONFIG_HAVE_CLK) += clk/ -obj-$(CONFIG_MAPLE) += maple/ -obj-$(CONFIG_SUPERHYWAY) += superhyway/ - -obj-y += pm_runtime.o +obj-y += pm_runtime.o diff --git a/drivers/sh/pm_runtime.c b/drivers/sh/pm_runtime.c index 8afa5a4589f2..10c65eb51f85 100644 --- a/drivers/sh/pm_runtime.c +++ b/drivers/sh/pm_runtime.c @@ -50,8 +50,25 @@ static struct pm_clk_notifier_block platform_bus_notifier = { .con_ids = { NULL, }, }; +static bool default_pm_on; + static int __init sh_pm_runtime_init(void) { + if (IS_ENABLED(CONFIG_ARCH_SHMOBILE_MULTI)) { + if (!of_machine_is_compatible("renesas,emev2") && + !of_machine_is_compatible("renesas,r7s72100") && + !of_machine_is_compatible("renesas,r8a73a4") && + !of_machine_is_compatible("renesas,r8a7740") && + !of_machine_is_compatible("renesas,r8a7778") && + !of_machine_is_compatible("renesas,r8a7779") && + !of_machine_is_compatible("renesas,r8a7790") && + !of_machine_is_compatible("renesas,r8a7791") && + !of_machine_is_compatible("renesas,sh7372") && + !of_machine_is_compatible("renesas,sh73a0")) + return 0; + } + + default_pm_on = true; pm_clk_add_notifier(&platform_bus_type, &platform_bus_notifier); return 0; } @@ -59,7 +76,8 @@ core_initcall(sh_pm_runtime_init); static int __init sh_pm_runtime_late_init(void) { - pm_genpd_poweroff_unused(); + if (default_pm_on) + pm_genpd_poweroff_unused(); return 0; } late_initcall(sh_pm_runtime_late_init); -- cgit v1.2.1 From 17c048fc4bd95efea208a1920f169547d8588f1f Mon Sep 17 00:00:00 2001 From: Josef Gajdusek Date: Sun, 11 May 2014 14:40:44 +0200 Subject: hwmon: (emc1403) fix inverted store_hyst() Attempts to set the hysteresis value to a temperature below the target limit fails with "write error: Numerical result out of range" due to an inverted comparison. Signed-off-by: Josef Gajdusek Reviewed-by: Jean Delvare Cc: stable@vger.kernel.org [Guenter Roeck: Updated headline and description] Signed-off-by: Guenter Roeck --- drivers/hwmon/emc1403.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/hwmon/emc1403.c b/drivers/hwmon/emc1403.c index 90ec1173b8a1..61d89d6d58fe 100644 --- a/drivers/hwmon/emc1403.c +++ b/drivers/hwmon/emc1403.c @@ -163,7 +163,7 @@ static ssize_t store_hyst(struct device *dev, if (retval < 0) goto fail; - hyst = val - retval * 1000; + hyst = retval * 1000 - val; hyst = DIV_ROUND_CLOSEST(hyst, 1000); if (hyst < 0 || hyst > 255) { retval = -ERANGE; -- cgit v1.2.1 From 8759f9046550f463098148bf577ccd32cdb895e3 Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Mon, 12 May 2014 11:44:51 +0200 Subject: hwmon: (emc1403) Fix resource leak on module unload Commit 454aee17f claims to convert driver emc1403 to use devm_hwmon_device_register_with_groups, however the patch itself makes use of hwmon_device_register_with_groups instead. As the driver remove function was still dropped, the hwmon device is no longer unregistered on driver removal, leading to a resource leak. Signed-off-by: Jean Delvare Fixes: 454aee17f hwmon: (emc1403) Convert to use devm_hwmon_device_register_with_groups Cc: Guenter Roeck Cc: stable@vger.kernel.org [3.13+] Signed-off-by: Guenter Roeck --- drivers/hwmon/emc1403.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/hwmon/emc1403.c b/drivers/hwmon/emc1403.c index 61d89d6d58fe..42a3cfcd15c1 100644 --- a/drivers/hwmon/emc1403.c +++ b/drivers/hwmon/emc1403.c @@ -355,9 +355,9 @@ static int emc1403_probe(struct i2c_client *client, if (id->driver_data) data->groups[1] = &emc1404_group; - hwmon_dev = hwmon_device_register_with_groups(&client->dev, - client->name, data, - data->groups); + hwmon_dev = devm_hwmon_device_register_with_groups(&client->dev, + client->name, data, + data->groups); if (IS_ERR(hwmon_dev)) return PTR_ERR(hwmon_dev); -- cgit v1.2.1 From 3a18e1398fc2dc9c32bbdc50664da3a77959a8d1 Mon Sep 17 00:00:00 2001 From: Josef Gajdusek Date: Mon, 12 May 2014 13:48:26 +0200 Subject: hwmon: (emc1403) Support full range of known chip revision numbers The datasheet for EMC1413/EMC1414, which is fully compatible to EMC1403/1404 and uses the same chip identification, references revision numbers 0x01, 0x03, and 0x04. Accept the full range of revision numbers from 0x01 to 0x04 to make sure none are missed. Signed-off-by: Josef Gajdusek Cc: stable@vger.kernel.org [Guenter Roeck: Updated headline and description] Signed-off-by: Guenter Roeck --- drivers/hwmon/emc1403.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/hwmon/emc1403.c b/drivers/hwmon/emc1403.c index 42a3cfcd15c1..01723f04fe45 100644 --- a/drivers/hwmon/emc1403.c +++ b/drivers/hwmon/emc1403.c @@ -330,7 +330,7 @@ static int emc1403_detect(struct i2c_client *client, } id = i2c_smbus_read_byte_data(client, THERMAL_REVISION_REG); - if (id != 0x01) + if (id < 0x01 || id > 0x04) return -ENODEV; return 0; -- cgit v1.2.1 From 111e0a9dc71ed75baa5e739289b9bdb06fda13be Mon Sep 17 00:00:00 2001 From: Mika Westerberg Date: Thu, 8 May 2014 17:30:31 +0300 Subject: spi/pxa2xx: Prevent DMA from transferring too many bytes In case we are doing DMA transfer and the size of the buffer is not multiple of 4 bytes the driver truncates that to 4-byte boundary and tries to handle remaining bytes using PIO. Or that is what it tried to do. What actually happens is that it calls ALIGN() to the buffer size which aligns it to the next 4-byte boundary (doesn't truncate). Doing this results 1-3 bytes extra to be transferred. Furthermore we handle remaining bytes using PIO which results one extra byte to be transferred. In worst case the driver transfers 4 extra bytes. While investigating this it turned out that the DMA hardware doesn't even have such limitation so we can solve this by dropping the code that tries to handle unaligned bytes. Reported-by: Chiau Ee Chew Reported-by: Hock Leong Kweh Signed-off-by: Mika Westerberg Signed-off-by: Mark Brown --- drivers/spi/spi-pxa2xx-dma.c | 16 ---------------- 1 file changed, 16 deletions(-) (limited to 'drivers') diff --git a/drivers/spi/spi-pxa2xx-dma.c b/drivers/spi/spi-pxa2xx-dma.c index 713af4806f26..f6759dc0153b 100644 --- a/drivers/spi/spi-pxa2xx-dma.c +++ b/drivers/spi/spi-pxa2xx-dma.c @@ -29,18 +29,6 @@ static int pxa2xx_spi_map_dma_buffer(struct driver_data *drv_data, struct sg_table *sgt; void *buf, *pbuf; - /* - * Some DMA controllers have problems transferring buffers that are - * not multiple of 4 bytes. So we truncate the transfer so that it - * is suitable for such controllers, and handle the trailing bytes - * manually after the DMA completes. - * - * REVISIT: It would be better if this information could be - * retrieved directly from the DMA device in a similar way than - * ->copy_align etc. is done. - */ - len = ALIGN(drv_data->len, 4); - if (dir == DMA_TO_DEVICE) { dmadev = drv_data->tx_chan->device->dev; sgt = &drv_data->tx_sgt; @@ -144,12 +132,8 @@ static void pxa2xx_spi_dma_transfer_complete(struct driver_data *drv_data, if (!error) { pxa2xx_spi_unmap_dma_buffers(drv_data); - /* Handle the last bytes of unaligned transfer */ drv_data->tx += drv_data->tx_map_len; - drv_data->write(drv_data); - drv_data->rx += drv_data->rx_map_len; - drv_data->read(drv_data); msg->actual_length += drv_data->len; msg->state = pxa2xx_spi_next_transfer(drv_data); -- cgit v1.2.1 From 8e8acb32960f42c81b1d50deac56a2c07bb6a18a Mon Sep 17 00:00:00 2001 From: Aaro Koskinen Date: Thu, 3 Apr 2014 22:24:01 +0300 Subject: MIPS/loongson2_cpufreq: Fix CPU clock rate setting Loongson2 has been using (incorrectly) kHz for cpu_clk rate. This has been unnoticed, as loongson2_cpufreq was the only place where the rate was set/get. After commit 652ed95d5fa6074b3c4ea245deb0691f1acb6656 (cpufreq: introduce cpufreq_generic_get() routine) things however broke, and now loops_per_jiffy adjustments are incorrect (1000 times too long). The patch fixes this by changing cpu_clk rate to Hz. Signed-off-by: Aaro Koskinen Cc: stable@vger.kernel.org Cc: Rafael J. Wysocki Cc: Viresh Kumar Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Cc: cpufreq@vger.kernel.org Cc: Aaro Koskinen Patchwork: https://patchwork.linux-mips.org/patch/6678/ Signed-off-by: Ralf Baechle --- drivers/cpufreq/loongson2_cpufreq.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/cpufreq/loongson2_cpufreq.c b/drivers/cpufreq/loongson2_cpufreq.c index f0bc31f5db27..d4add8621944 100644 --- a/drivers/cpufreq/loongson2_cpufreq.c +++ b/drivers/cpufreq/loongson2_cpufreq.c @@ -62,7 +62,7 @@ static int loongson2_cpufreq_target(struct cpufreq_policy *policy, set_cpus_allowed_ptr(current, &cpus_allowed); /* setting the cpu frequency */ - clk_set_rate(policy->clk, freq); + clk_set_rate(policy->clk, freq * 1000); return 0; } @@ -92,7 +92,7 @@ static int loongson2_cpufreq_cpu_init(struct cpufreq_policy *policy) i++) loongson2_clockmod_table[i].frequency = (rate * i) / 8; - ret = clk_set_rate(cpuclk, rate); + ret = clk_set_rate(cpuclk, rate * 1000); if (ret) { clk_put(cpuclk); return ret; -- cgit v1.2.1 From 8e33f91a0b84ae1964bef77cb92f5d41d97530c8 Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Tue, 15 Apr 2014 17:06:34 +0100 Subject: clk: shmobile: clk-mstp: change to using clock-indices With the addition of clock-indices, we need to change the renesas clock implementation to use these instead of the local definition of "renesas,clock-indices". Since this will break booting with older device trees, we add a simple auto-detection of which properties are present. Signed-off-by: Ben Dooks Acked-by: Geert Uytterhoeven Reviewed-by: Wolfram Sang Signed-off-by: Mike Turquette --- drivers/clk/shmobile/clk-mstp.c | 9 +++++++-- 1 file changed, 7 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/clk/shmobile/clk-mstp.c b/drivers/clk/shmobile/clk-mstp.c index 2e5810c88d11..1f6324e29a80 100644 --- a/drivers/clk/shmobile/clk-mstp.c +++ b/drivers/clk/shmobile/clk-mstp.c @@ -156,6 +156,7 @@ cpg_mstp_clock_register(const char *name, const char *parent_name, static void __init cpg_mstp_clocks_init(struct device_node *np) { struct mstp_clock_group *group; + const char *idxname; struct clk **clks; unsigned int i; @@ -184,6 +185,11 @@ static void __init cpg_mstp_clocks_init(struct device_node *np) for (i = 0; i < MSTP_MAX_CLOCKS; ++i) clks[i] = ERR_PTR(-ENOENT); + if (of_find_property(np, "clock-indices", &i)) + idxname = "clock-indices"; + else + idxname = "renesas,clock-indices"; + for (i = 0; i < MSTP_MAX_CLOCKS; ++i) { const char *parent_name; const char *name; @@ -197,8 +203,7 @@ static void __init cpg_mstp_clocks_init(struct device_node *np) continue; parent_name = of_clk_get_parent_name(np, i); - ret = of_property_read_u32_index(np, "renesas,clock-indices", i, - &clkidx); + ret = of_property_read_u32_index(np, idxname, i, &clkidx); if (parent_name == NULL || ret < 0) break; -- cgit v1.2.1 From e028a9e6b8a637af09ac4114083280df4a7045f1 Mon Sep 17 00:00:00 2001 From: Alex Williamson Date: Tue, 22 Apr 2014 10:08:40 -0600 Subject: iommu/amd: Fix interrupt remapping for aliased devices An apparent cut and paste error prevents the correct flags from being set on the alias device resulting in MSI on conventional PCI devices failing to work. This also produces error events from the IOMMU like: AMD-Vi: Event logged [INVALID_DEVICE_REQUEST device=00:14.4 address=0x000000fdf8000000 flags=0x0a00] Where 14.4 is a PCIe-to-PCI bridge with a device behind it trying to use MSI interrupts. Signed-off-by: Alex Williamson Cc: stable@vger.kernel.org Signed-off-by: Joerg Roedel --- drivers/iommu/amd_iommu.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/iommu/amd_iommu.c b/drivers/iommu/amd_iommu.c index c949520bd196..57068e8035b5 100644 --- a/drivers/iommu/amd_iommu.c +++ b/drivers/iommu/amd_iommu.c @@ -3999,7 +3999,7 @@ static struct irq_remap_table *get_irq_table(u16 devid, bool ioapic) iommu_flush_dte(iommu, devid); if (devid != alias) { irq_lookup_table[alias] = table; - set_dte_irq_entry(devid, table); + set_dte_irq_entry(alias, table); iommu_flush_dte(iommu, alias); } -- cgit v1.2.1 From 4378d99295fae5fd42b0ed1a3eeef2a1684e0c17 Mon Sep 17 00:00:00 2001 From: Jay Cornwall Date: Mon, 28 Apr 2014 17:27:46 -0500 Subject: iommu/amd: Take mmap_sem when calling get_user_pages get_user_pages requires caller to hold a read lock on mmap_sem. Signed-off-by: Jay Cornwall Signed-off-by: Suravee Suthikulpanit Signed-off-by: Joerg Roedel --- drivers/iommu/amd_iommu_v2.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'drivers') diff --git a/drivers/iommu/amd_iommu_v2.c b/drivers/iommu/amd_iommu_v2.c index 5208828792e6..203b2e6a91cf 100644 --- a/drivers/iommu/amd_iommu_v2.c +++ b/drivers/iommu/amd_iommu_v2.c @@ -504,8 +504,10 @@ static void do_fault(struct work_struct *work) write = !!(fault->flags & PPR_FAULT_WRITE); + down_read(&fault->state->mm->mmap_sem); npages = get_user_pages(fault->state->task, fault->state->mm, fault->address, 1, write, 0, &page, NULL); + up_read(&fault->state->mm->mmap_sem); if (npages == 1) { put_page(page); -- cgit v1.2.1 From 2c16c9fdacbbf3bd8ff6390e12c5d28b3f2c78ac Mon Sep 17 00:00:00 2001 From: Su Friendy Date: Wed, 7 May 2014 13:54:52 +0800 Subject: iommu/amd: fix enabling exclusion range for an exact device set_device_exclusion_range(u16 devid, struct ivmd_header *m) enables exclusion range for ONE device. IOMMU does not translate the access to the exclusion range from the device. The device is specified by input argument 'devid'. But 'devid' is not passed to the actual set function set_dev_entry_bit(), instead 'm->devid' is passed. 'm->devid' does not specify the exact device which needs enable the exclusion range. 'm->devid' represents DeviceID field of IVMD, which has different meaning depends on IVMD type. The caller init_exclusion_range() sets 'devid' for ONE device. When m->type is equal to ACPI_IVMD_TYPE_ALL or ACPI_IVMD_TYPE_RANGE, 'm->devid' is not equal to 'devid'. This patch fixes 'm->devid' to 'devid'. Signed-off-by: Su Friendy Signed-off-by: Tamori Masahiro Signed-off-by: Joerg Roedel --- drivers/iommu/amd_iommu_init.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/iommu/amd_iommu_init.c b/drivers/iommu/amd_iommu_init.c index b76c58dbe30c..0e08545d7298 100644 --- a/drivers/iommu/amd_iommu_init.c +++ b/drivers/iommu/amd_iommu_init.c @@ -788,7 +788,7 @@ static void __init set_device_exclusion_range(u16 devid, struct ivmd_header *m) * per device. But we can enable the exclusion range per * device. This is done here */ - set_dev_entry_bit(m->devid, DEV_ENTRY_EX); + set_dev_entry_bit(devid, DEV_ENTRY_EX); iommu->exclusion_start = m->range_start; iommu->exclusion_length = m->range_length; } -- cgit v1.2.1 From 5ff365fb6aed4c7ee5aae7b0239ce0b514aefabc Mon Sep 17 00:00:00 2001 From: Aaron Lu Date: Tue, 13 May 2014 09:51:50 +0800 Subject: ACPI / video: correct DMI tag for Dell Inspiron 7520 MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The DMI tag used to identify Dell Inspiron 7520 should be product name instead of product version. Fixes: 0e9f81d3b7cd (ACPI / video: Add systems that should favour native backlight interface) Reported-and-tested-by: Téo Mazars References: https://bugzilla.redhat.com/show_bug.cgi?id=909552 Cc: All applicable Signed-off-by: Aaron Lu Signed-off-by: Rafael J. Wysocki --- drivers/acpi/video.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/acpi/video.c b/drivers/acpi/video.c index 88393899a0bc..6c76a49be12e 100644 --- a/drivers/acpi/video.c +++ b/drivers/acpi/video.c @@ -508,7 +508,7 @@ static struct dmi_system_id video_dmi_table[] __initdata = { .ident = "Dell Inspiron 7520", .matches = { DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."), - DMI_MATCH(DMI_PRODUCT_VERSION, "Inspiron 7520"), + DMI_MATCH(DMI_PRODUCT_NAME, "Inspiron 7520"), }, }, { -- cgit v1.2.1 From 85dbd5801f62b66e2aa7826aaefcaebead44c8a6 Mon Sep 17 00:00:00 2001 From: Lv Zheng Date: Tue, 13 May 2014 16:50:30 +0800 Subject: ACPICA: Tables: Restore old behavor to favor 32-bit FADT addresses. We need to find a smarter way to switch to 64-bit FADT addresses according to the bug report. This patch reverts Linux to the original behavior. Fixes: 0249ed2444d6 (ACPICA: Add option to favor 32-bit FADT addresses.) References: https://bugzilla.kernel.org/show_bug.cgi?id=74021 Reported-and-tested-by: Oswald Buddenhagen Signed-off-by: Lv Zheng Cc: 3.14+ # 3.14+ Signed-off-by: Rafael J. Wysocki --- drivers/acpi/acpica/acglobal.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/acpi/acpica/acglobal.h b/drivers/acpi/acpica/acglobal.h index 49bbc71fad54..a08a448068dd 100644 --- a/drivers/acpi/acpica/acglobal.h +++ b/drivers/acpi/acpica/acglobal.h @@ -141,9 +141,9 @@ ACPI_INIT_GLOBAL(u8, acpi_gbl_do_not_use_xsdt, FALSE); * address. Although ACPICA adheres to the ACPI specification which * requires the use of the corresponding 64-bit address if it is non-zero, * some machines have been found to have a corrupted non-zero 64-bit - * address. Default is FALSE, do not favor the 32-bit addresses. + * address. Default is TRUE, favor the 32-bit addresses. */ -ACPI_INIT_GLOBAL(u8, acpi_gbl_use32_bit_fadt_addresses, FALSE); +ACPI_INIT_GLOBAL(u8, acpi_gbl_use32_bit_fadt_addresses, TRUE); /* * Optionally truncate I/O addresses to 16 bits. Provides compatibility -- cgit v1.2.1 From d40a63c45b506b0681918d7c62a15cc9d48c8681 Mon Sep 17 00:00:00 2001 From: Dirk Brandewie Date: Thu, 8 May 2014 12:57:24 -0700 Subject: intel_pstate: remove setting P state to MAX on init Setting the P state of the core to max at init time is a hold over from early implementation of intel_pstate where intel_pstate disabled cpufreq and loaded VERY early in the boot sequence. This was to ensure that intel_pstate did not affect boot time. This in not needed now that intel_pstate is a cpufreq driver. Removing this covers the case where a CPU has gone through a manual CPU offline/online cycle and the P state is set to MAX on init and the CPU immediately goes idle. Due to HW coordination the P state request on the idle CPU will drag all cores to MAX P state until the load is reevaluated when to core goes non-idle. Reported-by: Patrick Marlier Signed-off-by: Dirk Brandewie Cc: 3.14+ # 3.14+ Signed-off-by: Rafael J. Wysocki --- drivers/cpufreq/intel_pstate.c | 13 +------------ 1 file changed, 1 insertion(+), 12 deletions(-) (limited to 'drivers') diff --git a/drivers/cpufreq/intel_pstate.c b/drivers/cpufreq/intel_pstate.c index 39c4f8520848..eab8ccfe6beb 100644 --- a/drivers/cpufreq/intel_pstate.c +++ b/drivers/cpufreq/intel_pstate.c @@ -554,12 +554,7 @@ static void intel_pstate_get_cpu_pstates(struct cpudata *cpu) if (pstate_funcs.get_vid) pstate_funcs.get_vid(cpu); - - /* - * goto max pstate so we don't slow up boot if we are built-in if we are - * a module we will take care of it during normal operation - */ - intel_pstate_set_pstate(cpu, cpu->pstate.max_pstate); + intel_pstate_set_pstate(cpu, cpu->pstate.min_pstate); } static inline void intel_pstate_calc_busy(struct cpudata *cpu, @@ -704,11 +699,6 @@ static int intel_pstate_init_cpu(unsigned int cpunum) cpu = all_cpu_data[cpunum]; intel_pstate_get_cpu_pstates(cpu); - if (!cpu->pstate.current_pstate) { - all_cpu_data[cpunum] = NULL; - kfree(cpu); - return -ENODATA; - } cpu->cpu = cpunum; @@ -719,7 +709,6 @@ static int intel_pstate_init_cpu(unsigned int cpunum) cpu->timer.expires = jiffies + HZ/100; intel_pstate_busy_pid_reset(cpu); intel_pstate_sample(cpu); - intel_pstate_set_pstate(cpu, cpu->pstate.max_pstate); add_timer_on(&cpu->timer, cpunum); -- cgit v1.2.1 From 629c27aa0c930b9c67188cfc625bf6cdd2af6764 Mon Sep 17 00:00:00 2001 From: Vikas Chaudhary Date: Tue, 13 May 2014 07:41:32 -0400 Subject: iscsi_ibft: Fix finding Broadcom specific ibft sign MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Search for Broadcom specific ibft sign "BIFT" along with other possible values on UEFI This patch is fix for regression introduced in “935a9fee51c945b8942be2d7b4bae069167b4886”. https://lkml.org/lkml/2011/12/16/353 This impacts Broadcom CNA for iSCSI Boot on UEFI platform. Signed-off-by: Vikas Chaudhary Signed-off-by: Konrad Rzeszutek Wilk Acked-by: Mike Christie --- drivers/firmware/iscsi_ibft.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/firmware/iscsi_ibft.c b/drivers/firmware/iscsi_ibft.c index 3ee852c9925b..071c2c969eec 100644 --- a/drivers/firmware/iscsi_ibft.c +++ b/drivers/firmware/iscsi_ibft.c @@ -756,6 +756,7 @@ static const struct { */ { ACPI_SIG_IBFT }, { "iBFT" }, + { "BIFT" }, /* Broadcom iSCSI Offload */ }; static void __init acpi_find_ibft_region(void) -- cgit v1.2.1 From cfece5857ca51d1dcdb157017aba226f594e9dcf Mon Sep 17 00:00:00 2001 From: Guennadi Liakhovetski Date: Mon, 14 Apr 2014 10:49:34 -0300 Subject: [media] V4L2: ov7670: fix a wrong index, potentially Oopsing the kernel from user-space Commit 75e2bdad8901a0b599e01a96229be922eef1e488 "ov7670: allow configuration of image size, clock speed, and I/O method" uses a wrong index to iterate an array. Apart from being wrong, it also uses an unchecked value from user-space, which can cause access to unmapped memory in the kernel, triggered by a normal desktop user with rights to use V4L2 devices. Signed-off-by: Guennadi Liakhovetski Acked-by: Jonathan Corbet Cc: stable@vger.kernel.org Signed-off-by: Mauro Carvalho Chehab --- drivers/media/i2c/ov7670.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/media/i2c/ov7670.c b/drivers/media/i2c/ov7670.c index e8a1ce204036..cdd7c1b7259b 100644 --- a/drivers/media/i2c/ov7670.c +++ b/drivers/media/i2c/ov7670.c @@ -1109,7 +1109,7 @@ static int ov7670_enum_framesizes(struct v4l2_subdev *sd, * windows that fall outside that. */ for (i = 0; i < n_win_sizes; i++) { - struct ov7670_win_size *win = &info->devtype->win_sizes[index]; + struct ov7670_win_size *win = &info->devtype->win_sizes[i]; if (info->min_width && win->width < info->min_width) continue; if (info->min_height && win->height < info->min_height) -- cgit v1.2.1 From 97d9d23dda6f37d90aefeec4ed619d52df525382 Mon Sep 17 00:00:00 2001 From: Guennadi Liakhovetski Date: Sat, 26 Apr 2014 12:51:31 -0300 Subject: [media] V4L2: fix VIDIOC_CREATE_BUFS in 64- / 32-bit compatibility mode If a struct contains 64-bit fields, it is aligned on 64-bit boundaries within containing structs in 64-bit compilations. This is the case with struct v4l2_window, which contains pointers and is embedded into struct v4l2_format, and that one is embedded into struct v4l2_create_buffers. Unlike some other structs, used as a part of the kernel ABI as ioctl() arguments, that are packed, these structs aren't packed. This isn't a problem per se, but the ioctl-compat code for VIDIOC_CREATE_BUFS contains a bug, that triggers in such 64-bit builds. That code wrongly assumes, that in struct v4l2_create_buffers, struct v4l2_format immediately follows the __u32 memory field, which in fact isn't the case. This bug wasn't visible until now, because until recently hardly any applications used this ioctl() and mostly embedded 32-bit only drivers implemented it. This is changing now with addition of this ioctl() to some USB drivers, e.g. UVC. This patch fixes the bug by copying parts of struct v4l2_create_buffers separately. Signed-off-by: Guennadi Liakhovetski Acked-by: Laurent Pinchart Signed-off-by: Mauro Carvalho Chehab Cc: stable@vger.kernel.org --- drivers/media/v4l2-core/v4l2-compat-ioctl32.c | 12 +++++++----- 1 file changed, 7 insertions(+), 5 deletions(-) (limited to 'drivers') diff --git a/drivers/media/v4l2-core/v4l2-compat-ioctl32.c b/drivers/media/v4l2-core/v4l2-compat-ioctl32.c index 04b2daf567be..7e2411c36419 100644 --- a/drivers/media/v4l2-core/v4l2-compat-ioctl32.c +++ b/drivers/media/v4l2-core/v4l2-compat-ioctl32.c @@ -178,6 +178,9 @@ struct v4l2_create_buffers32 { static int __get_v4l2_format32(struct v4l2_format *kp, struct v4l2_format32 __user *up) { + if (get_user(kp->type, &up->type)) + return -EFAULT; + switch (kp->type) { case V4L2_BUF_TYPE_VIDEO_CAPTURE: case V4L2_BUF_TYPE_VIDEO_OUTPUT: @@ -204,17 +207,16 @@ static int __get_v4l2_format32(struct v4l2_format *kp, struct v4l2_format32 __us static int get_v4l2_format32(struct v4l2_format *kp, struct v4l2_format32 __user *up) { - if (!access_ok(VERIFY_READ, up, sizeof(struct v4l2_format32)) || - get_user(kp->type, &up->type)) - return -EFAULT; + if (!access_ok(VERIFY_READ, up, sizeof(struct v4l2_format32))) + return -EFAULT; return __get_v4l2_format32(kp, up); } static int get_v4l2_create32(struct v4l2_create_buffers *kp, struct v4l2_create_buffers32 __user *up) { if (!access_ok(VERIFY_READ, up, sizeof(struct v4l2_create_buffers32)) || - copy_from_user(kp, up, offsetof(struct v4l2_create_buffers32, format.fmt))) - return -EFAULT; + copy_from_user(kp, up, offsetof(struct v4l2_create_buffers32, format))) + return -EFAULT; return __get_v4l2_format32(&kp->format, &up->format); } -- cgit v1.2.1 From 582da6527da30f6e21a95c9f3f2810d46a8f406e Mon Sep 17 00:00:00 2001 From: Thomas Petazzoni Date: Wed, 14 May 2014 13:36:36 +0200 Subject: of: make of_update_property() usable earlier in the boot process Commit 75b57ecf9d1d1e17d099ab13b8f48e6e038676be ('of: Make device nodes kobjects so they show up in sysfs') has turned Device Tree nodes in kobjects and added a sysfs based representation for Device Tree nodes. Since the sysfs logic is only available after the execution of a core_initcall(), the patch took precautions in of_add_property() and of_remove_property() to not do any sysfs related manipulation early in the boot process. However, it forgot to do the same for of_update_property(), which if used early in the boot process (before core_initcalls have been called), tries to call sysfs_remove_bin_file(), and crashes: ------------[ cut here ]------------ WARNING: CPU: 0 PID: 0 at /home/thomas/projets/linux-2.6/fs/kernfs/dir.c:1216 kernfs_remove_by_name_ns+0x80/0x88() kernfs: can not remove '(null)', no directory Modules linked in: CPU: 0 PID: 0 Comm: swapper/0 Not tainted 3.15.0-rc1-00127-g1d7e7b2-dirty #423 [] (unwind_backtrace) from [] (show_stack+0x10/0x14) [] (show_stack) from [] (dump_stack+0x84/0x94) [] (dump_stack) from [] (warn_slowpath_common+0x6c/0x88) [] (warn_slowpath_common) from [] (warn_slowpath_fmt+0x30/0x40) [] (warn_slowpath_fmt) from [] (kernfs_remove_by_name_ns+0x80/0x88) [] (kernfs_remove_by_name_ns) from [] (of_update_property+0xc0/0xf0) [] (of_update_property) from [] (mvebu_timer_and_clk_init+0xfc/0x194) [] (mvebu_timer_and_clk_init) from [] (start_kernel+0x218/0x350) [] (start_kernel) from [<00008070>] (0x8070) ---[ end trace 3406ff24bd97382e ]--- Unable to handle kernel NULL pointer dereference at virtual address 0000003c pgd = c0004000 [0000003c] *pgd=00000000 Internal error: Oops: 5 [#1] SMP ARM Modules linked in: CPU: 0 PID: 0 Comm: swapper/0 Tainted: G W 3.15.0-rc1-00127-g1d7e7b2-dirty #423 task: c10ad4d8 ti: c10a2000 task.ti: c10a2000 PC is at kernfs_find_ns+0x8/0xf0 LR is at kernfs_find_and_get_ns+0x30/0x48 pc : [] lr : [] psr: 600001d3 sp : c10a3f34 ip : 00000073 fp : 00000000 r10: 00000000 r9 : cfffc240 r8 : cfdf2980 r7 : cf812c00 r6 : 00000000 r5 : 00000000 r4 : c10b45e0 r3 : c10ad4d8 r2 : 00000000 r1 : cf812c00 r0 : 00000000 Flags: nZCv IRQs off FIQs off Mode SVC_32 ISA ARM Segment kernel Control: 10c53c7d Table: 0000404a DAC: 00000015 Process swapper/0 (pid: 0, stack limit = 0xc10a2240) Stack: (0xc10a3f34 to 0xc10a4000) 3f20: c10b45e0 00000000 00000000 3f40: cf812c00 c010394c 00000063 cf812c00 00000001 cf812c00 cfdf29ac c03932cc 3f60: 00000063 cf812bc0 cfdf29ac cf812c00 ffffffff c03943f8 cfdf2980 c0104468 3f80: cfdf2a04 cfdf2980 cf812bc0 c06634b0 c10aa3c0 c0394da4 c10f74dc cfdf2980 3fa0: cf812bc0 c0647248 c10aa3c0 ffffffff c10de940 c10aa3c0 ffffffff c0640934 3fc0: ffffffff ffffffff c06404ec 00000000 00000000 c06634b0 00000000 10c53c7d 3fe0: c10aa434 c06634ac c10ae4c8 0000406a 414fc091 00008070 00000000 00000000 [] (kernfs_find_ns) from [<00000001>] (0x1) Code: e5c89001 eaffffcf e92d40f0 e1a06002 (e1d023bc) ---[ end trace 3406ff24bd97382f ]--- Kernel panic - not syncing: Attempted to kill the idle task! ---[ end Kernel panic - not syncing: Attempted to kill the idle task! To fix this problem, we simply skip the sysfs related calls in of_update_property(), and rely on of_init() to fix up things when it will be called, exactly as is done in of_add_property() and of_remove_property(). Signed-off-by: Thomas Petazzoni Fixes: 75b57ecf9d1d ("of: Make device nodes kobjects so they show up in sysfs") Signed-off-by: Grant Likely --- drivers/of/base.c | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'drivers') diff --git a/drivers/of/base.c b/drivers/of/base.c index 6d4ee22708c9..32e969d95319 100644 --- a/drivers/of/base.c +++ b/drivers/of/base.c @@ -1831,6 +1831,10 @@ int of_update_property(struct device_node *np, struct property *newprop) if (!found) return -ENODEV; + /* At early boot, bail out and defer setup to of_init() */ + if (!of_kset) + return found ? 0 : -ENODEV; + /* Update the sysfs attribute */ sysfs_remove_bin_file(&np->kobj, &oldprop->attr); __of_add_property_sysfs(np, newprop); -- cgit v1.2.1 From 47bb27e78867997040a228328f2a631c3c7f2c82 Mon Sep 17 00:00:00 2001 From: "Du, Wenkai" Date: Thu, 10 Apr 2014 23:03:19 +0000 Subject: i2c: designware: Mask all interrupts during i2c controller enable There have been "i2c_designware 80860F41:00: controller timed out" errors on a number of Baytrail platforms. The issue is caused by incorrect value in Interrupt Mask Register (DW_IC_INTR_MASK) when i2c core is being enabled. This causes call to __i2c_dw_enable() to immediately start the transfer which leads to timeout. There are 3 failure modes observed: 1. Failure in S0 to S3 resume path The default value after reset for DW_IC_INTR_MASK is 0x8ff. When we start the first transaction after resuming from system sleep, TX_EMPTY interrupt is already unmasked because of the hardware default. 2. Failure in normal operational path This failure happens rarely and is hard to reproduce. Debug trace showed that DW_IC_INTR_MASK had value of 0x254 when failure occurred, which meant TX_EMPTY was unmasked. 3. Failure in S3 to S0 suspend path This failure also happens rarely and is hard to reproduce. Adding debug trace that read DW_IC_INTR_MASK made this failure not reproducible. But from ISR call trace we could conclude TX_EMPTY was unmasked when problem occurred. The patch masks all interrupts before the controller is enabled to resolve the faulty DW_IC_INTR_MASK conditions. Signed-off-by: Wenkai Du Acked-by: Mika Westerberg [wsa: improved the comment and removed typo in commit msg] Signed-off-by: Wolfram Sang Cc: stable@kernel.org --- drivers/i2c/busses/i2c-designware-core.c | 3 +++ 1 file changed, 3 insertions(+) (limited to 'drivers') diff --git a/drivers/i2c/busses/i2c-designware-core.c b/drivers/i2c/busses/i2c-designware-core.c index 22e92c3d3d07..3c20e4bd6dd1 100644 --- a/drivers/i2c/busses/i2c-designware-core.c +++ b/drivers/i2c/busses/i2c-designware-core.c @@ -422,6 +422,9 @@ static void i2c_dw_xfer_init(struct dw_i2c_dev *dev) */ dw_writel(dev, msgs[dev->msg_write_idx].addr | ic_tar, DW_IC_TAR); + /* enforce disabled interrupts (due to HW issues) */ + i2c_dw_disable_int(dev); + /* Enable the adapter */ __i2c_dw_enable(dev, true); -- cgit v1.2.1 From 37e5eb0bae7bb4d98c2153c3c3400b5c00c3cad1 Mon Sep 17 00:00:00 2001 From: Ulf Hansson Date: Thu, 10 Apr 2014 16:19:29 +0200 Subject: i2c: nomadik: Don't use IS_ERR for devm_ioremap devm_ioremap() returns NULL on error, not an error. Signed-off-by: Ulf Hansson Acked-by: Linus Walleij Signed-off-by: Wolfram Sang Cc: stable@kernel.org --- drivers/i2c/busses/i2c-nomadik.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/i2c/busses/i2c-nomadik.c b/drivers/i2c/busses/i2c-nomadik.c index 28cbe1b2a2ec..32c85e9ecdae 100644 --- a/drivers/i2c/busses/i2c-nomadik.c +++ b/drivers/i2c/busses/i2c-nomadik.c @@ -999,7 +999,7 @@ static int nmk_i2c_probe(struct amba_device *adev, const struct amba_id *id) dev->virtbase = devm_ioremap(&adev->dev, adev->res.start, resource_size(&adev->res)); - if (IS_ERR(dev->virtbase)) { + if (!dev->virtbase) { ret = -ENOMEM; goto err_no_mem; } -- cgit v1.2.1 From ce78cc071f5f541480e381cc0241d37590041a9d Mon Sep 17 00:00:00 2001 From: Olof Johansson Date: Fri, 11 Apr 2014 15:19:41 -0700 Subject: i2c: s3c2410: resume race fix Don't unmark the device as suspended until after it's been re-setup. The main race would be w.r.t. an i2c driver that gets resumed at the same time (asyncronously), that is allowed to do a transfer since suspended is set to 0 before reinit, but really should have seen the -EIO return instead. Signed-off-by: Olof Johansson Signed-off-by: Doug Anderson Acked-by: Kukjin Kim Signed-off-by: Wolfram Sang Cc: stable@kernel.org --- drivers/i2c/busses/i2c-s3c2410.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/i2c/busses/i2c-s3c2410.c b/drivers/i2c/busses/i2c-s3c2410.c index ae4491062e41..bb3a9964f7e0 100644 --- a/drivers/i2c/busses/i2c-s3c2410.c +++ b/drivers/i2c/busses/i2c-s3c2410.c @@ -1276,10 +1276,10 @@ static int s3c24xx_i2c_resume(struct device *dev) struct platform_device *pdev = to_platform_device(dev); struct s3c24xx_i2c *i2c = platform_get_drvdata(pdev); - i2c->suspended = 0; clk_prepare_enable(i2c->clk); s3c24xx_i2c_init(i2c); clk_disable_unprepare(i2c->clk); + i2c->suspended = 0; return 0; } -- cgit v1.2.1 From fa01d096bfcfd89398b1f3a3f91805dab76f7fe5 Mon Sep 17 00:00:00 2001 From: Andy Gross Date: Fri, 2 May 2014 20:54:29 -0500 Subject: i2c: qup: Fix pm_runtime_get_sync usage This patch corrects the error check on the call to pm_runtime_get_sync. Signed-off-by: Andy Gross Reviewed-by: Ivan T. Ivanov Acked-by: Bjorn Andersson Signed-off-by: Wolfram Sang --- drivers/i2c/busses/i2c-qup.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/i2c/busses/i2c-qup.c b/drivers/i2c/busses/i2c-qup.c index 1b4cf14f1106..2a5efb5b487c 100644 --- a/drivers/i2c/busses/i2c-qup.c +++ b/drivers/i2c/busses/i2c-qup.c @@ -479,7 +479,7 @@ static int qup_i2c_xfer(struct i2c_adapter *adap, int ret, idx; ret = pm_runtime_get_sync(qup->dev); - if (ret) + if (ret < 0) goto out; writel(1, qup->base + QUP_SW_RESET); -- cgit v1.2.1 From d7653964c590ba846aa11a8f6edf409773cbc492 Mon Sep 17 00:00:00 2001 From: Wolfram Sang Date: Mon, 5 May 2014 18:36:21 +0200 Subject: i2c: rcar: bail out on zero length transfers This hardware does not support zero length transfers. Instead, the driver does one (random) byte transfers currently with undefined results for the slaves. We now bail out. Signed-off-by: Wolfram Sang Signed-off-by: Wolfram Sang Cc: stable@kernel.org --- drivers/i2c/busses/i2c-rcar.c | 9 ++++++++- 1 file changed, 8 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/i2c/busses/i2c-rcar.c b/drivers/i2c/busses/i2c-rcar.c index d4fa8eba6e9d..06d47aafbb79 100644 --- a/drivers/i2c/busses/i2c-rcar.c +++ b/drivers/i2c/busses/i2c-rcar.c @@ -561,6 +561,12 @@ static int rcar_i2c_master_xfer(struct i2c_adapter *adap, ret = -EINVAL; for (i = 0; i < num; i++) { + /* This HW can't send STOP after address phase */ + if (msgs[i].len == 0) { + ret = -EOPNOTSUPP; + break; + } + /*-------------- spin lock -----------------*/ spin_lock_irqsave(&priv->lock, flags); @@ -625,7 +631,8 @@ static int rcar_i2c_master_xfer(struct i2c_adapter *adap, static u32 rcar_i2c_func(struct i2c_adapter *adap) { - return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL; + /* This HW can't do SMBUS_QUICK and NOSTART */ + return I2C_FUNC_I2C | (I2C_FUNC_SMBUS_EMUL & ~I2C_FUNC_SMBUS_QUICK); } static const struct i2c_algorithm rcar_i2c_algo = { -- cgit v1.2.1 From 610f2de3559c383caf8fbbf91e9968102dff7ca0 Mon Sep 17 00:00:00 2001 From: Mikulas Patocka Date: Thu, 20 Feb 2014 18:01:01 -0500 Subject: dm crypt: fix cpu hotplug crash by removing per-cpu structure The DM crypt target used per-cpu structures to hold pointers to a ablkcipher_request structure. The code assumed that the work item keeps executing on a single CPU, so it didn't use synchronization when accessing this structure. If a CPU is disabled by writing 0 to /sys/devices/system/cpu/cpu*/online, the work item could be moved to another CPU. This causes dm-crypt crashes, like the following, because the code starts using an incorrect ablkcipher_request: smpboot: CPU 7 is now offline BUG: unable to handle kernel NULL pointer dereference at 0000000000000130 IP: [] crypt_convert+0x12d/0x3c0 [dm_crypt] ... Call Trace: [] ? kcryptd_crypt+0x305/0x470 [dm_crypt] [] ? finish_task_switch+0x40/0xc0 [] ? process_one_work+0x168/0x470 [] ? worker_thread+0x10b/0x390 [] ? manage_workers.isra.26+0x290/0x290 [] ? kthread+0xaf/0xc0 [] ? kthread_create_on_node+0x120/0x120 [] ? ret_from_fork+0x7c/0xb0 [] ? kthread_create_on_node+0x120/0x120 Fix this bug by removing the per-cpu definition. The structure ablkcipher_request is accessed via a pointer from convert_context. Consequently, if the work item is rescheduled to a different CPU, the thread still uses the same ablkcipher_request. This change may undermine performance improvements intended by commit c0297721 ("dm crypt: scale to multiple cpus") on select hardware. In practice no performance difference was observed on recent hardware. But regardless, correctness is more important than performance. Signed-off-by: Mikulas Patocka Signed-off-by: Mike Snitzer Cc: stable@vger.kernel.org --- drivers/md/dm-crypt.c | 61 ++++++++++----------------------------------------- 1 file changed, 12 insertions(+), 49 deletions(-) (limited to 'drivers') diff --git a/drivers/md/dm-crypt.c b/drivers/md/dm-crypt.c index 784695d22fde..53b213226c01 100644 --- a/drivers/md/dm-crypt.c +++ b/drivers/md/dm-crypt.c @@ -19,7 +19,6 @@ #include #include #include -#include #include #include #include @@ -43,6 +42,7 @@ struct convert_context { struct bvec_iter iter_out; sector_t cc_sector; atomic_t cc_pending; + struct ablkcipher_request *req; }; /* @@ -111,15 +111,7 @@ struct iv_tcw_private { enum flags { DM_CRYPT_SUSPENDED, DM_CRYPT_KEY_VALID }; /* - * Duplicated per-CPU state for cipher. - */ -struct crypt_cpu { - struct ablkcipher_request *req; -}; - -/* - * The fields in here must be read only after initialization, - * changing state should be in crypt_cpu. + * The fields in here must be read only after initialization. */ struct crypt_config { struct dm_dev *dev; @@ -150,12 +142,6 @@ struct crypt_config { sector_t iv_offset; unsigned int iv_size; - /* - * Duplicated per cpu state. Access through - * per_cpu_ptr() only. - */ - struct crypt_cpu __percpu *cpu; - /* ESSIV: struct crypto_cipher *essiv_tfm */ void *iv_private; struct crypto_ablkcipher **tfms; @@ -192,11 +178,6 @@ static void clone_init(struct dm_crypt_io *, struct bio *); static void kcryptd_queue_crypt(struct dm_crypt_io *io); static u8 *iv_of_dmreq(struct crypt_config *cc, struct dm_crypt_request *dmreq); -static struct crypt_cpu *this_crypt_config(struct crypt_config *cc) -{ - return this_cpu_ptr(cc->cpu); -} - /* * Use this to access cipher attributes that are the same for each CPU. */ @@ -903,16 +884,15 @@ static void kcryptd_async_done(struct crypto_async_request *async_req, static void crypt_alloc_req(struct crypt_config *cc, struct convert_context *ctx) { - struct crypt_cpu *this_cc = this_crypt_config(cc); unsigned key_index = ctx->cc_sector & (cc->tfms_count - 1); - if (!this_cc->req) - this_cc->req = mempool_alloc(cc->req_pool, GFP_NOIO); + if (!ctx->req) + ctx->req = mempool_alloc(cc->req_pool, GFP_NOIO); - ablkcipher_request_set_tfm(this_cc->req, cc->tfms[key_index]); - ablkcipher_request_set_callback(this_cc->req, + ablkcipher_request_set_tfm(ctx->req, cc->tfms[key_index]); + ablkcipher_request_set_callback(ctx->req, CRYPTO_TFM_REQ_MAY_BACKLOG | CRYPTO_TFM_REQ_MAY_SLEEP, - kcryptd_async_done, dmreq_of_req(cc, this_cc->req)); + kcryptd_async_done, dmreq_of_req(cc, ctx->req)); } /* @@ -921,7 +901,6 @@ static void crypt_alloc_req(struct crypt_config *cc, static int crypt_convert(struct crypt_config *cc, struct convert_context *ctx) { - struct crypt_cpu *this_cc = this_crypt_config(cc); int r; atomic_set(&ctx->cc_pending, 1); @@ -932,7 +911,7 @@ static int crypt_convert(struct crypt_config *cc, atomic_inc(&ctx->cc_pending); - r = crypt_convert_block(cc, ctx, this_cc->req); + r = crypt_convert_block(cc, ctx, ctx->req); switch (r) { /* async */ @@ -941,7 +920,7 @@ static int crypt_convert(struct crypt_config *cc, reinit_completion(&ctx->restart); /* fall through*/ case -EINPROGRESS: - this_cc->req = NULL; + ctx->req = NULL; ctx->cc_sector++; continue; @@ -1040,6 +1019,7 @@ static struct dm_crypt_io *crypt_io_alloc(struct crypt_config *cc, io->sector = sector; io->error = 0; io->base_io = NULL; + io->ctx.req = NULL; atomic_set(&io->io_pending, 0); return io; @@ -1065,6 +1045,8 @@ static void crypt_dec_pending(struct dm_crypt_io *io) if (!atomic_dec_and_test(&io->io_pending)) return; + if (io->ctx.req) + mempool_free(io->ctx.req, cc->req_pool); mempool_free(io, cc->io_pool); if (likely(!base_io)) @@ -1492,8 +1474,6 @@ static int crypt_wipe_key(struct crypt_config *cc) static void crypt_dtr(struct dm_target *ti) { struct crypt_config *cc = ti->private; - struct crypt_cpu *cpu_cc; - int cpu; ti->private = NULL; @@ -1505,13 +1485,6 @@ static void crypt_dtr(struct dm_target *ti) if (cc->crypt_queue) destroy_workqueue(cc->crypt_queue); - if (cc->cpu) - for_each_possible_cpu(cpu) { - cpu_cc = per_cpu_ptr(cc->cpu, cpu); - if (cpu_cc->req) - mempool_free(cpu_cc->req, cc->req_pool); - } - crypt_free_tfms(cc); if (cc->bs) @@ -1530,9 +1503,6 @@ static void crypt_dtr(struct dm_target *ti) if (cc->dev) dm_put_device(ti, cc->dev); - if (cc->cpu) - free_percpu(cc->cpu); - kzfree(cc->cipher); kzfree(cc->cipher_string); @@ -1588,13 +1558,6 @@ static int crypt_ctr_cipher(struct dm_target *ti, if (tmp) DMWARN("Ignoring unexpected additional cipher options"); - cc->cpu = __alloc_percpu(sizeof(*(cc->cpu)), - __alignof__(struct crypt_cpu)); - if (!cc->cpu) { - ti->error = "Cannot allocate per cpu state"; - goto bad_mem; - } - /* * For compatibility with the original dm-crypt mapping format, if * only the cipher name is supplied, use cbc-plain. -- cgit v1.2.1 From 8d07e8a5f5bc7b90f755d9b427ea930024f4c986 Mon Sep 17 00:00:00 2001 From: Joe Thornber Date: Tue, 6 May 2014 16:28:14 +0100 Subject: dm thin: allow metadata commit if pool is in PM_OUT_OF_DATA_SPACE mode Commit 3e1a0699 ("dm thin: fix out of data space handling") introduced a regression in the metadata commit() method by returning an error if the pool is in PM_OUT_OF_DATA_SPACE mode. This oversight caused a thin device to return errors even if the default queue_if_no_space ENOSPC handling mode is used. Fix commit() to only fail if pool is in PM_READ_ONLY or PM_FAIL mode. Reported-by: qindehua@163.com Signed-off-by: Joe Thornber Signed-off-by: Mike Snitzer Cc: stable@vger.kernel.org # 3.14+ --- drivers/md/dm-thin.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/md/dm-thin.c b/drivers/md/dm-thin.c index 13abade76ad9..15f748ba6754 100644 --- a/drivers/md/dm-thin.c +++ b/drivers/md/dm-thin.c @@ -935,7 +935,7 @@ static int commit(struct pool *pool) { int r; - if (get_pool_mode(pool) != PM_WRITE) + if (get_pool_mode(pool) >= PM_READ_ONLY) return -EINVAL; r = dm_pool_commit_metadata(pool->pmd); -- cgit v1.2.1 From 85ad643b7e7e52d37620fb272a9fd577a8095647 Mon Sep 17 00:00:00 2001 From: Joe Thornber Date: Fri, 9 May 2014 15:59:38 +0100 Subject: dm thin: add timeout to stop out-of-data-space mode holding IO forever If the pool runs out of data space, dm-thin can be configured to either error IOs that would trigger provisioning, or hold those IOs until the pool is resized. Unfortunately, holding IOs until the pool is resized can result in a cascade of tasks hitting the hung_task_timeout, which may render the system unavailable. Add a fixed timeout so IOs can only be held for a maximum of 60 seconds. If LVM is going to resize a thin-pool that is out of data space it needs to be prompt about it. Signed-off-by: Joe Thornber Signed-off-by: Mike Snitzer Cc: stable@vger.kernel.org # 3.14+ --- drivers/md/dm-thin.c | 21 +++++++++++++++++++++ 1 file changed, 21 insertions(+) (limited to 'drivers') diff --git a/drivers/md/dm-thin.c b/drivers/md/dm-thin.c index 15f748ba6754..2e71de8e0048 100644 --- a/drivers/md/dm-thin.c +++ b/drivers/md/dm-thin.c @@ -27,6 +27,7 @@ #define MAPPING_POOL_SIZE 1024 #define PRISON_CELLS 1024 #define COMMIT_PERIOD HZ +#define NO_SPACE_TIMEOUT (HZ * 60) DECLARE_DM_KCOPYD_THROTTLE_WITH_MODULE_PARM(snapshot_copy_throttle, "A percentage of time allocated for copy on write"); @@ -175,6 +176,7 @@ struct pool { struct workqueue_struct *wq; struct work_struct worker; struct delayed_work waker; + struct delayed_work no_space_timeout; unsigned long last_commit_jiffies; unsigned ref_count; @@ -1590,6 +1592,20 @@ static void do_waker(struct work_struct *ws) queue_delayed_work(pool->wq, &pool->waker, COMMIT_PERIOD); } +/* + * We're holding onto IO to allow userland time to react. After the + * timeout either the pool will have been resized (and thus back in + * PM_WRITE mode), or we degrade to PM_READ_ONLY and start erroring IO. + */ +static void do_no_space_timeout(struct work_struct *ws) +{ + struct pool *pool = container_of(to_delayed_work(ws), struct pool, + no_space_timeout); + + if (get_pool_mode(pool) == PM_OUT_OF_DATA_SPACE && !pool->pf.error_if_no_space) + set_pool_mode(pool, PM_READ_ONLY); +} + /*----------------------------------------------------------------*/ struct noflush_work { @@ -1715,6 +1731,9 @@ static void set_pool_mode(struct pool *pool, enum pool_mode new_mode) pool->process_discard = process_discard; pool->process_prepared_mapping = process_prepared_mapping; pool->process_prepared_discard = process_prepared_discard_passdown; + + if (!pool->pf.error_if_no_space) + queue_delayed_work(pool->wq, &pool->no_space_timeout, NO_SPACE_TIMEOUT); break; case PM_WRITE: @@ -2100,6 +2119,7 @@ static struct pool *pool_create(struct mapped_device *pool_md, INIT_WORK(&pool->worker, do_worker); INIT_DELAYED_WORK(&pool->waker, do_waker); + INIT_DELAYED_WORK(&pool->no_space_timeout, do_no_space_timeout); spin_lock_init(&pool->lock); bio_list_init(&pool->deferred_flush_bios); INIT_LIST_HEAD(&pool->prepared_mappings); @@ -2662,6 +2682,7 @@ static void pool_postsuspend(struct dm_target *ti) struct pool *pool = pt->pool; cancel_delayed_work(&pool->waker); + cancel_delayed_work(&pool->no_space_timeout); flush_workqueue(pool->wq); (void) commit(pool); } -- cgit v1.2.1 From 4cdd2ad78098244c1bc9ec4374ea1c225fd1cd6f Mon Sep 17 00:00:00 2001 From: Mike Snitzer Date: Tue, 13 May 2014 13:49:39 -0400 Subject: dm mpath: fix lock order inconsistency in multipath_ioctl Commit 3e9f1be1b40 ("dm mpath: remove process_queued_ios()") did not consistently take the multipath device's spinlock (m->lock) before calling dm_table_run_md_queue_async() -- which takes the q->queue_lock. Found with code inspection using hint from reported lockdep warning. Reported-by: Bart Van Assche Signed-off-by: Mike Snitzer --- drivers/md/dm-mpath.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/md/dm-mpath.c b/drivers/md/dm-mpath.c index aa009e865871..fa0f6cbd6a41 100644 --- a/drivers/md/dm-mpath.c +++ b/drivers/md/dm-mpath.c @@ -1566,8 +1566,8 @@ static int multipath_ioctl(struct dm_target *ti, unsigned int cmd, } if (m->pg_init_required) __pg_init_all_paths(m); - spin_unlock_irqrestore(&m->lock, flags); dm_table_run_md_queue_async(m->ti->table); + spin_unlock_irqrestore(&m->lock, flags); } return r ? : __blkdev_driver_ioctl(bdev, mode, cmd, arg); -- cgit v1.2.1 From f4cdbc21444a45d207a8dc175f44d2facfbd0845 Mon Sep 17 00:00:00 2001 From: Jani Nikula Date: Wed, 14 May 2014 13:02:19 +0300 Subject: drm/i915/dp: force eDP lane count to max available lanes on BDW There are certain BDW high res eDP machines that regressed due to commit 38aecea0ccbb909d635619cba22f1891e589b434 Author: Daniel Vetter Date: Mon Mar 3 11:18:10 2014 +0100 drm/i915: reverse dp link param selection, prefer fast over wide again The commit lead to 2 lanes at 5.4 Gbps being used instead of 4 lanes at 2.7 Gbps on the affected machines. Link training succeeded for both, but the screen remained blank with the former config. Further investigation showed that 4 lanes at 5.4 Gbps worked also. The root cause for the blank screen using 2 lanes remains unknown, but apparently the driver for a certain other operating system by default uses the max available lanes. Follow suit on Broadwell eDP, for at least until we figure out what is going on. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=76711 Reviewed-by: Daniel Vetter Reviewed-by: Rodrigo Vivi Tested-by: Rodrigo Vivi Signed-off-by: Jani Nikula --- drivers/gpu/drm/i915/intel_dp.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c index 8233f2aea665..2a00cb828d20 100644 --- a/drivers/gpu/drm/i915/intel_dp.c +++ b/drivers/gpu/drm/i915/intel_dp.c @@ -810,7 +810,12 @@ intel_dp_compute_config(struct intel_encoder *encoder, bpp = dev_priv->vbt.edp_bpp; } - if (dev_priv->vbt.edp_lanes) { + if (IS_BROADWELL(dev)) { + /* Yes, it's an ugly hack. */ + min_lane_count = max_lane_count; + DRM_DEBUG_KMS("forcing lane count to max (%u) on BDW\n", + min_lane_count); + } else if (dev_priv->vbt.edp_lanes) { min_lane_count = min(dev_priv->vbt.edp_lanes, max_lane_count); DRM_DEBUG_KMS("using min %u lanes per VBT\n", -- cgit v1.2.1 From afba0b5a221c0dacbbdf3a778d539fbc90fc6191 Mon Sep 17 00:00:00 2001 From: Chris Wilson Date: Tue, 13 May 2014 16:07:37 +0100 Subject: drm/i915: Use the first mode if there is no preferred mode in the EDID This matches the algorithm used by earlier kernels when selecting the mode for the fbcon. And only if there is no modes at all, do we fall back to using the BIOS configuration. Seamless transition is still preserved (from the BIOS configuration to ours) so long as the BIOS has also chosen what we hope is the native configuration. Reported-by: Knut Petersen Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=78655 Reviewed-by: Jesse Barnes Tested-by: Knut Petersen Signed-off-by: Chris Wilson [Jani: applied Chris' "Please imagine that I wrote this correctly."] Signed-off-by: Jani Nikula --- drivers/gpu/drm/i915/intel_fbdev.c | 9 +++++++++ 1 file changed, 9 insertions(+) (limited to 'drivers') diff --git a/drivers/gpu/drm/i915/intel_fbdev.c b/drivers/gpu/drm/i915/intel_fbdev.c index fce4a0d93c0b..f73ba5e6b7a8 100644 --- a/drivers/gpu/drm/i915/intel_fbdev.c +++ b/drivers/gpu/drm/i915/intel_fbdev.c @@ -387,6 +387,15 @@ static bool intel_fb_initial_config(struct drm_fb_helper *fb_helper, height); } + /* No preferred mode marked by the EDID? Are there any modes? */ + if (!modes[i] && !list_empty(&connector->modes)) { + DRM_DEBUG_KMS("using first mode listed on connector %s\n", + drm_get_connector_name(connector)); + modes[i] = list_first_entry(&connector->modes, + struct drm_display_mode, + head); + } + /* last resort: use current mode */ if (!modes[i]) { /* -- cgit v1.2.1 From 721e82c08c1afd6b47367b0e0c4a62140b0667f3 Mon Sep 17 00:00:00 2001 From: Aaron Lu Date: Mon, 12 May 2014 16:55:45 +0800 Subject: drm/i915: restore backlight precision when converting from ACPI When we set backlight on behalf of ACPI opregion, we will convert the backlight value in the 0-255 range defined in opregion to the actual hardware level. Commit 22505b82a2 (drm/i915: avoid brightness overflow when doing scale) is meant to fix the overflow problem when doing the conversion, but it also caused a problem that the converted hardware level doesn't quite represent the intended value: say user wants maximum backlight level(255 in opregion's range), then we will calculate the actual hardware level to be: level = freq / max * level, where freq is the hardware's max backlight level(937 on an user's box), and max and level are all 255. The converted value should be 937 but the above calculation will yield 765. To fix this issue, just use 64 bits to do the calculation to keep the precision and avoid overflow at the same time. Buglink: https://bugzilla.kernel.org/show_bug.cgi?id=72491 Reported-by: Nico Schottelius Reviewed-by: Chris Wilson Cc: stable@vger.kernel.org Signed-off-by: Aaron Lu Signed-off-by: Jani Nikula --- drivers/gpu/drm/i915/intel_panel.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/i915/intel_panel.c b/drivers/gpu/drm/i915/intel_panel.c index 0eead16aeda7..cb8cfb7e0974 100644 --- a/drivers/gpu/drm/i915/intel_panel.c +++ b/drivers/gpu/drm/i915/intel_panel.c @@ -492,6 +492,7 @@ void intel_panel_set_backlight(struct intel_connector *connector, u32 level, enum pipe pipe = intel_get_pipe_from_connector(connector); u32 freq; unsigned long flags; + u64 n; if (!panel->backlight.present || pipe == INVALID_PIPE) return; @@ -502,10 +503,9 @@ void intel_panel_set_backlight(struct intel_connector *connector, u32 level, /* scale to hardware max, but be careful to not overflow */ freq = panel->backlight.max; - if (freq < max) - level = level * freq / max; - else - level = freq / max * level; + n = (u64)level * freq; + do_div(n, max); + level = n; panel->backlight.level = level; if (panel->backlight.device) -- cgit v1.2.1 From e95a2f7509f5219177d6821a0a8754f93892ca56 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Ville=20Syrj=C3=A4l=C3=A4?= Date: Thu, 8 May 2014 15:09:19 +0300 Subject: drm/i915: Increase WM memory latency values on SNB MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit On SNB the BIOS provided WM memory latency values seem insufficient to handle high resolution displays. In this particular case the display mode was a 2560x1440@60Hz, which makes the pixel clock 241.5 MHz. It was empirically found that a memory latency value if 1.2 usec is enough to avoid underruns, whereas the BIOS provided value of 0.7 usec was clearly too low. Incidentally 1.2 usec is what the typical BIOS provided values are on IVB systems. Increase the WM memory latency values to at least 1.2 usec on SNB. Hopefully this won't have a significant effect on power consumption. v2: Increase the latency values regardless of the pixel clock Cc: Robert N Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=70254 Tested-by: Robert Navarro Tested-by: Vitaly Minko Cc: stable@vger.kernel.org Signed-off-by: Ville Syrjälä Signed-off-by: Jani Nikula --- drivers/gpu/drm/i915/intel_pm.c | 40 ++++++++++++++++++++++++++++++++++++++++ 1 file changed, 40 insertions(+) (limited to 'drivers') diff --git a/drivers/gpu/drm/i915/intel_pm.c b/drivers/gpu/drm/i915/intel_pm.c index 19e94c3edc19..d93dcf683e8c 100644 --- a/drivers/gpu/drm/i915/intel_pm.c +++ b/drivers/gpu/drm/i915/intel_pm.c @@ -2095,6 +2095,43 @@ static void intel_print_wm_latency(struct drm_device *dev, } } +static bool ilk_increase_wm_latency(struct drm_i915_private *dev_priv, + uint16_t wm[5], uint16_t min) +{ + int level, max_level = ilk_wm_max_level(dev_priv->dev); + + if (wm[0] >= min) + return false; + + wm[0] = max(wm[0], min); + for (level = 1; level <= max_level; level++) + wm[level] = max_t(uint16_t, wm[level], DIV_ROUND_UP(min, 5)); + + return true; +} + +static void snb_wm_latency_quirk(struct drm_device *dev) +{ + struct drm_i915_private *dev_priv = dev->dev_private; + bool changed; + + /* + * The BIOS provided WM memory latency values are often + * inadequate for high resolution displays. Adjust them. + */ + changed = ilk_increase_wm_latency(dev_priv, dev_priv->wm.pri_latency, 12) | + ilk_increase_wm_latency(dev_priv, dev_priv->wm.spr_latency, 12) | + ilk_increase_wm_latency(dev_priv, dev_priv->wm.cur_latency, 12); + + if (!changed) + return; + + DRM_DEBUG_KMS("WM latency values increased to avoid potential underruns\n"); + intel_print_wm_latency(dev, "Primary", dev_priv->wm.pri_latency); + intel_print_wm_latency(dev, "Sprite", dev_priv->wm.spr_latency); + intel_print_wm_latency(dev, "Cursor", dev_priv->wm.cur_latency); +} + static void ilk_setup_wm_latency(struct drm_device *dev) { struct drm_i915_private *dev_priv = dev->dev_private; @@ -2112,6 +2149,9 @@ static void ilk_setup_wm_latency(struct drm_device *dev) intel_print_wm_latency(dev, "Primary", dev_priv->wm.pri_latency); intel_print_wm_latency(dev, "Sprite", dev_priv->wm.spr_latency); intel_print_wm_latency(dev, "Cursor", dev_priv->wm.cur_latency); + + if (IS_GEN6(dev)) + snb_wm_latency_quirk(dev); } static void ilk_compute_wm_parameters(struct drm_crtc *crtc, -- cgit v1.2.1 From 93fa9d32670f5592c8e56abc9928fc194e1e72fc Mon Sep 17 00:00:00 2001 From: Marcel Apfelbaum Date: Thu, 15 May 2014 12:42:49 -0600 Subject: PCI: shpchp: Check bridge's secondary (not primary) bus speed When a new device is added below a hotplug bridge, the bridge's secondary bus speed and the device's bus speed must match. The shpchp driver previously checked the bridge's *primary* bus speed, not the secondary bus speed. This caused hot-add errors like: shpchp 0000:00:03.0: Speed of bus ff and adapter 0 mismatch Check the secondary bus speed instead. [bhelgaas: changelog] Link: https://bugzilla.kernel.org/show_bug.cgi?id=75251 Fixes: 3749c51ac6c1 ("PCI: Make current and maximum bus speeds part of the PCI core") Signed-off-by: Marcel Apfelbaum Signed-off-by: Bjorn Helgaas Acked-by: Michael S. Tsirkin CC: stable@vger.kernel.org # v2.6.34+ --- drivers/pci/hotplug/shpchp_ctrl.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/pci/hotplug/shpchp_ctrl.c b/drivers/pci/hotplug/shpchp_ctrl.c index 58499277903a..6efc2ec5e4db 100644 --- a/drivers/pci/hotplug/shpchp_ctrl.c +++ b/drivers/pci/hotplug/shpchp_ctrl.c @@ -282,8 +282,8 @@ static int board_added(struct slot *p_slot) return WRONG_BUS_FREQUENCY; } - bsp = ctrl->pci_dev->bus->cur_bus_speed; - msp = ctrl->pci_dev->bus->max_bus_speed; + bsp = ctrl->pci_dev->subordinate->cur_bus_speed; + msp = ctrl->pci_dev->subordinate->max_bus_speed; /* Check if there are other slots or devices on the same bus */ if (!list_empty(&ctrl->pci_dev->subordinate->devices)) -- cgit v1.2.1 From 448ba904160f9d8f69217c28a1692cee5afbff88 Mon Sep 17 00:00:00 2001 From: Andy Grover Date: Tue, 15 Apr 2014 14:13:12 -0700 Subject: target: Allow non-supporting backends to set pi_prot_type to 0 Userspace tools assume if a value is read from configfs, it is valid and will not cause an error if the same value is written back. The only valid value for pi_prot_type for backends not supporting DIF is 0, so allow this particular value to be set without returning an error. Reported-by: Krzysztof Chojnowski Signed-off-by: Andy Grover Reviewed-by: Sagi Grimberg Cc: stable@vger.kernel.org # 3.14+ Signed-off-by: Nicholas Bellinger --- drivers/target/target_core_device.c | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'drivers') diff --git a/drivers/target/target_core_device.c b/drivers/target/target_core_device.c index 65001e133670..382b66b212ae 100644 --- a/drivers/target/target_core_device.c +++ b/drivers/target/target_core_device.c @@ -936,6 +936,10 @@ int se_dev_set_pi_prot_type(struct se_device *dev, int flag) return 0; } if (!dev->transport->init_prot || !dev->transport->free_prot) { + /* 0 is only allowed value for non-supporting backends */ + if (flag == 0) + return 0; + pr_err("DIF protection not supported by backend: %s\n", dev->transport->name); return -ENOSYS; -- cgit v1.2.1 From 9fe63c88b1d59f1ce054d6948ccd3096496ecedb Mon Sep 17 00:00:00 2001 From: Sagi Grimberg Date: Tue, 29 Apr 2014 13:13:44 +0300 Subject: Target/iser: Fix wrong connection requests list addition Should be adding list_add_tail($new, $head) and not the other way around. Signed-off-by: Sagi Grimberg Cc: stable@vger.kernel.org # 3.10+ Signed-off-by: Nicholas Bellinger --- drivers/infiniband/ulp/isert/ib_isert.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/infiniband/ulp/isert/ib_isert.c b/drivers/infiniband/ulp/isert/ib_isert.c index c98fdb185931..fda3feb45008 100644 --- a/drivers/infiniband/ulp/isert/ib_isert.c +++ b/drivers/infiniband/ulp/isert/ib_isert.c @@ -663,7 +663,7 @@ isert_connect_request(struct rdma_cm_id *cma_id, struct rdma_cm_event *event) goto out_conn_dev; mutex_lock(&isert_np->np_accept_mutex); - list_add_tail(&isert_np->np_accept_list, &isert_conn->conn_accept_node); + list_add_tail(&isert_conn->conn_accept_node, &isert_np->np_accept_list); mutex_unlock(&isert_np->np_accept_mutex); pr_debug("isert_connect_request() waking up np_accept_wq: %p\n", np); -- cgit v1.2.1 From 531b7bf4bd795d9a09eac92504322a472c010bc8 Mon Sep 17 00:00:00 2001 From: Sagi Grimberg Date: Tue, 29 Apr 2014 13:13:45 +0300 Subject: Target/iser: Fix iscsit_accept_np and rdma_cm racy flow RDMA CM and iSCSI target flows are asynchronous and completely uncorrelated. Relying on the fact that iscsi_accept_np will be called after CM connection request event and will wait for it is a mistake. When attempting to login to a few targets this flow is racy and unpredictable, but for parallel login to dozens of targets will race and hang every time. The correct synchronizing mechanism in this case is pending on a semaphore rather than a wait_for_event. We keep the pending interruptible for iscsi_np cleanup stage. (Squash patch to remove dead code into parent - nab) Reported-by: Slava Shwartsman Signed-off-by: Sagi Grimberg Cc: stable@vger.kernel.org # 3.10+ Signed-off-by: Nicholas Bellinger --- drivers/infiniband/ulp/isert/ib_isert.c | 25 ++++++------------------- drivers/infiniband/ulp/isert/ib_isert.h | 2 +- 2 files changed, 7 insertions(+), 20 deletions(-) (limited to 'drivers') diff --git a/drivers/infiniband/ulp/isert/ib_isert.c b/drivers/infiniband/ulp/isert/ib_isert.c index fda3feb45008..826eaf5741f6 100644 --- a/drivers/infiniband/ulp/isert/ib_isert.c +++ b/drivers/infiniband/ulp/isert/ib_isert.c @@ -28,6 +28,7 @@ #include #include #include +#include #include "isert_proto.h" #include "ib_isert.h" @@ -666,8 +667,8 @@ isert_connect_request(struct rdma_cm_id *cma_id, struct rdma_cm_event *event) list_add_tail(&isert_conn->conn_accept_node, &isert_np->np_accept_list); mutex_unlock(&isert_np->np_accept_mutex); - pr_debug("isert_connect_request() waking up np_accept_wq: %p\n", np); - wake_up(&isert_np->np_accept_wq); + pr_debug("isert_connect_request() up np_sem np: %p\n", np); + up(&isert_np->np_sem); return 0; out_conn_dev: @@ -2999,7 +3000,7 @@ isert_setup_np(struct iscsi_np *np, pr_err("Unable to allocate struct isert_np\n"); return -ENOMEM; } - init_waitqueue_head(&isert_np->np_accept_wq); + sema_init(&isert_np->np_sem, 0); mutex_init(&isert_np->np_accept_mutex); INIT_LIST_HEAD(&isert_np->np_accept_list); init_completion(&isert_np->np_login_comp); @@ -3047,18 +3048,6 @@ out: return ret; } -static int -isert_check_accept_queue(struct isert_np *isert_np) -{ - int empty; - - mutex_lock(&isert_np->np_accept_mutex); - empty = list_empty(&isert_np->np_accept_list); - mutex_unlock(&isert_np->np_accept_mutex); - - return empty; -} - static int isert_rdma_accept(struct isert_conn *isert_conn) { @@ -3151,16 +3140,14 @@ isert_accept_np(struct iscsi_np *np, struct iscsi_conn *conn) int max_accept = 0, ret; accept_wait: - ret = wait_event_interruptible(isert_np->np_accept_wq, - !isert_check_accept_queue(isert_np) || - np->np_thread_state == ISCSI_NP_THREAD_RESET); + ret = down_interruptible(&isert_np->np_sem); if (max_accept > 5) return -ENODEV; spin_lock_bh(&np->np_thread_lock); if (np->np_thread_state == ISCSI_NP_THREAD_RESET) { spin_unlock_bh(&np->np_thread_lock); - pr_err("ISCSI_NP_THREAD_RESET for isert_accept_np\n"); + pr_debug("ISCSI_NP_THREAD_RESET for isert_accept_np\n"); return -ENODEV; } spin_unlock_bh(&np->np_thread_lock); diff --git a/drivers/infiniband/ulp/isert/ib_isert.h b/drivers/infiniband/ulp/isert/ib_isert.h index 4c072ae34c01..da6612e68000 100644 --- a/drivers/infiniband/ulp/isert/ib_isert.h +++ b/drivers/infiniband/ulp/isert/ib_isert.h @@ -182,7 +182,7 @@ struct isert_device { }; struct isert_np { - wait_queue_head_t np_accept_wq; + struct semaphore np_sem; struct rdma_cm_id *np_cm_id; struct mutex np_accept_mutex; struct list_head np_accept_list; -- cgit v1.2.1 From 14f4b54fe38f3a8f8392a50b951c8aa43b63687a Mon Sep 17 00:00:00 2001 From: Sagi Grimberg Date: Tue, 29 Apr 2014 13:13:47 +0300 Subject: Target/iscsi,iser: Avoid accepting transport connections during stop stage When the target is in stop stage, iSER transport initiates RDMA disconnects. The iSER initiator may wish to establish a new connection over the still existing network portal. In this case iSER transport should not accept and resume new RDMA connections. In order to learn that, iscsi_np is added with enabled flag so the iSER transport can check when deciding weather to accept and resume a new connection request. The iscsi_np is enabled after successful transport setup, and disabled before iscsi_np login threads are cleaned up. Signed-off-by: Sagi Grimberg Cc: stable@vger.kernel.org # 3.10+ Signed-off-by: Nicholas Bellinger --- drivers/infiniband/ulp/isert/ib_isert.c | 11 ++++++++++- drivers/target/iscsi/iscsi_target_core.h | 1 + drivers/target/iscsi/iscsi_target_login.c | 1 + drivers/target/iscsi/iscsi_target_tpg.c | 1 + 4 files changed, 13 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/infiniband/ulp/isert/ib_isert.c b/drivers/infiniband/ulp/isert/ib_isert.c index 826eaf5741f6..a1710465faaf 100644 --- a/drivers/infiniband/ulp/isert/ib_isert.c +++ b/drivers/infiniband/ulp/isert/ib_isert.c @@ -562,7 +562,15 @@ isert_connect_request(struct rdma_cm_id *cma_id, struct rdma_cm_event *event) struct isert_device *device; struct ib_device *ib_dev = cma_id->device; int ret = 0; - u8 pi_support = np->tpg_np->tpg->tpg_attrib.t10_pi; + u8 pi_support; + + spin_lock_bh(&np->np_thread_lock); + if (!np->enabled) { + spin_unlock_bh(&np->np_thread_lock); + pr_debug("iscsi_np is not enabled, reject connect request\n"); + return rdma_reject(cma_id, NULL, 0); + } + spin_unlock_bh(&np->np_thread_lock); pr_debug("Entering isert_connect_request cma_id: %p, context: %p\n", cma_id, cma_id->context); @@ -653,6 +661,7 @@ isert_connect_request(struct rdma_cm_id *cma_id, struct rdma_cm_event *event) goto out_mr; } + pi_support = np->tpg_np->tpg->tpg_attrib.t10_pi; if (pi_support && !device->pi_capable) { pr_err("Protection information requested but not supported\n"); ret = -EINVAL; diff --git a/drivers/target/iscsi/iscsi_target_core.h b/drivers/target/iscsi/iscsi_target_core.h index 6960f22909ae..302eb3b78715 100644 --- a/drivers/target/iscsi/iscsi_target_core.h +++ b/drivers/target/iscsi/iscsi_target_core.h @@ -775,6 +775,7 @@ struct iscsi_np { int np_ip_proto; int np_sock_type; enum np_thread_state_table np_thread_state; + bool enabled; enum iscsi_timer_flags_table np_login_timer_flags; u32 np_exports; enum np_flags_table np_flags; diff --git a/drivers/target/iscsi/iscsi_target_login.c b/drivers/target/iscsi/iscsi_target_login.c index 8739b98f6f93..b72d8550e8bc 100644 --- a/drivers/target/iscsi/iscsi_target_login.c +++ b/drivers/target/iscsi/iscsi_target_login.c @@ -984,6 +984,7 @@ int iscsi_target_setup_login_socket( } np->np_transport = t; + np->enabled = true; return 0; } diff --git a/drivers/target/iscsi/iscsi_target_tpg.c b/drivers/target/iscsi/iscsi_target_tpg.c index eb96b20dc09e..ca1811858afd 100644 --- a/drivers/target/iscsi/iscsi_target_tpg.c +++ b/drivers/target/iscsi/iscsi_target_tpg.c @@ -184,6 +184,7 @@ static void iscsit_clear_tpg_np_login_thread( return; } + tpg_np->tpg_np->enabled = false; iscsit_reset_np_thread(tpg_np->tpg_np, tpg_np, tpg, shutdown); } -- cgit v1.2.1 From 7cbfcc953789ff864c2bf8365a82a3fba4869649 Mon Sep 17 00:00:00 2001 From: Nicholas Bellinger Date: Thu, 1 May 2014 13:44:56 -0700 Subject: iscsi-target: Change BUG_ON to REJECT in iscsit_process_nop_out This patch changes an incorrect use of BUG_ON to instead generate a REJECT + PROTOCOL_ERROR in iscsit_process_nop_out() code. This case can occur with traditional TCP where a flood of zeros in the data stream can reach this block for what is presumed to be a NOP-OUT with a solicited reply, but without a valid iscsi_cmd pointer. This incorrect BUG_ON was introduced during the v3.11-rc timeframe with the following commit: commit 778de368964c5b7e8100cde9f549992d521e9c89 Author: Nicholas Bellinger Date: Fri Jun 14 16:07:47 2013 -0700 iscsi/isert-target: Refactor ISCSI_OP_NOOP RX handling Reported-by: Arshad Hussain Cc: stable@vger.kernel.org # 3.11+ Signed-off-by: Nicholas Bellinger --- drivers/target/iscsi/iscsi_target.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/target/iscsi/iscsi_target.c b/drivers/target/iscsi/iscsi_target.c index 78cab13bbb1b..46588c85d39b 100644 --- a/drivers/target/iscsi/iscsi_target.c +++ b/drivers/target/iscsi/iscsi_target.c @@ -1593,7 +1593,9 @@ int iscsit_process_nop_out(struct iscsi_conn *conn, struct iscsi_cmd *cmd, * Initiator is expecting a NopIN ping reply.. */ if (hdr->itt != RESERVED_ITT) { - BUG_ON(!cmd); + if (!cmd) + return iscsit_add_reject(conn, ISCSI_REASON_PROTOCOL_ERROR, + (unsigned char *)hdr); spin_lock_bh(&conn->cmd_lock); list_add_tail(&cmd->i_conn_node, &conn->conn_cmd_list); -- cgit v1.2.1 From ed8ec8f707ed4760c124d47b27c93df8ec5b1eba Mon Sep 17 00:00:00 2001 From: Nicholas Bellinger Date: Mon, 12 May 2014 12:18:32 -0700 Subject: tcm_fc: Fix free-after-use regression in ft_free_cmd This patch fixes a free-after-use regression in ft_free_cmd(), where ft_sess_put() is called with cmd->sess after percpu_ida_free() has already released the tag. Fix this bug by saving the ft_sess pointer ahead of percpu_ida_free(), and pass it directly to ft_sess_put(). The regression was originally introduced in v3.13-rc1 commit: commit 5f544cfac956971099e906f94568bc3fd1a7108a Author: Nicholas Bellinger Date: Mon Sep 23 12:12:42 2013 -0700 tcm_fc: Convert to per-cpu command map pre-allocation of ft_cmd Reported-by: Jun Wu Cc: Mark Rustad Cc: Robert Love Cc: #3.13+ Signed-off-by: Nicholas Bellinger --- drivers/target/tcm_fc/tfc_cmd.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/target/tcm_fc/tfc_cmd.c b/drivers/target/tcm_fc/tfc_cmd.c index 01cf37f212c3..f5fd515b2bee 100644 --- a/drivers/target/tcm_fc/tfc_cmd.c +++ b/drivers/target/tcm_fc/tfc_cmd.c @@ -90,18 +90,18 @@ static void ft_free_cmd(struct ft_cmd *cmd) { struct fc_frame *fp; struct fc_lport *lport; - struct se_session *se_sess; + struct ft_sess *sess; if (!cmd) return; - se_sess = cmd->sess->se_sess; + sess = cmd->sess; fp = cmd->req_frame; lport = fr_dev(fp); if (fr_seq(fp)) lport->tt.seq_release(fr_seq(fp)); fc_frame_free(fp); - percpu_ida_free(&se_sess->sess_tag_pool, cmd->se_cmd.map_tag); - ft_sess_put(cmd->sess); /* undo get from lookup at recv */ + percpu_ida_free(&sess->se_sess->sess_tag_pool, cmd->se_cmd.map_tag); + ft_sess_put(sess); /* undo get from lookup at recv */ } void ft_release_cmd(struct se_cmd *se_cmd) -- cgit v1.2.1 From 52d0aa7980cfee85c831b2969e659055395386d4 Mon Sep 17 00:00:00 2001 From: Nicholas Bellinger Date: Wed, 14 May 2014 20:54:26 +0000 Subject: iscsi-target: Disable Immediate + Unsolicited Data with ISER Protection This patch explicitly disables Immediate + Unsolicited Data for ISER connections during login in iscsi_login_zero_tsih_s2() when protection has been enabled for the session by the underlying hardware. This is currently required because protection / signature memory regions (MRs) expect T10 PI to occur on RDMA READs + RDMA WRITEs transfers, and not on a immediate data payload associated with ISCSI_OP_SCSI_CMD, or unsolicited data-out associated with a ISCSI_OP_SCSI_DATA_OUT. v2 changes: - Add TARGET_PROT_DOUT_INSERT check (Sagi) - Add pr_debug noisemaker (Sagi) - Add goto to avoid early return from MRDSL check (nab) Cc: Sagi Grimberg Cc: Or Gerlitz Signed-off-by: Nicholas Bellinger --- drivers/target/iscsi/iscsi_target_login.c | 27 ++++++++++++++++++++++++++- 1 file changed, 26 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/target/iscsi/iscsi_target_login.c b/drivers/target/iscsi/iscsi_target_login.c index b72d8550e8bc..ca31fa1b8a4b 100644 --- a/drivers/target/iscsi/iscsi_target_login.c +++ b/drivers/target/iscsi/iscsi_target_login.c @@ -436,7 +436,7 @@ static int iscsi_login_zero_tsih_s2( } off = mrdsl % PAGE_SIZE; if (!off) - return 0; + goto check_prot; if (mrdsl < PAGE_SIZE) mrdsl = PAGE_SIZE; @@ -452,6 +452,31 @@ static int iscsi_login_zero_tsih_s2( ISCSI_LOGIN_STATUS_NO_RESOURCES); return -1; } + /* + * ISER currently requires that ImmediateData + Unsolicited + * Data be disabled when protection / signature MRs are enabled. + */ +check_prot: + if (sess->se_sess->sup_prot_ops & + (TARGET_PROT_DOUT_STRIP | TARGET_PROT_DOUT_PASS | + TARGET_PROT_DOUT_INSERT)) { + + sprintf(buf, "ImmediateData=No"); + if (iscsi_change_param_value(buf, conn->param_list, 0) < 0) { + iscsit_tx_login_rsp(conn, ISCSI_STATUS_CLS_TARGET_ERR, + ISCSI_LOGIN_STATUS_NO_RESOURCES); + return -1; + } + + sprintf(buf, "InitialR2T=Yes"); + if (iscsi_change_param_value(buf, conn->param_list, 0) < 0) { + iscsit_tx_login_rsp(conn, ISCSI_STATUS_CLS_TARGET_ERR, + ISCSI_LOGIN_STATUS_NO_RESOURCES); + return -1; + } + pr_debug("Forcing ImmediateData=No + InitialR2T=Yes for" + " T10-PI enabled ISER session\n"); + } } return 0; -- cgit v1.2.1 From 07b8dae38b09bcfede7e726f172e39b5ce8390d9 Mon Sep 17 00:00:00 2001 From: Andy Grover Date: Wed, 14 May 2014 15:48:06 -0700 Subject: target: Don't allow setting WC emulation if device doesn't support Just like for pSCSI, if the transport sets get_write_cache, then it is not valid to enable write cache emulation for it. Return an error. see https://bugzilla.redhat.com/show_bug.cgi?id=1082675 Reviewed-by: Chris Leech Signed-off-by: Andy Grover Cc: stable@vger.kernel.org # 3.10+ Signed-off-by: Nicholas Bellinger --- drivers/target/target_core_device.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/target/target_core_device.c b/drivers/target/target_core_device.c index 382b66b212ae..26416c15d65c 100644 --- a/drivers/target/target_core_device.c +++ b/drivers/target/target_core_device.c @@ -798,10 +798,10 @@ int se_dev_set_emulate_write_cache(struct se_device *dev, int flag) pr_err("emulate_write_cache not supported for pSCSI\n"); return -EINVAL; } - if (dev->transport->get_write_cache) { - pr_warn("emulate_write_cache cannot be changed when underlying" - " HW reports WriteCacheEnabled, ignoring request\n"); - return 0; + if (flag && + dev->transport->get_write_cache) { + pr_err("emulate_write_cache not supported for this device\n"); + return -EINVAL; } dev->dev_attrib.emulate_write_cache = flag; -- cgit v1.2.1 From be02f259fda66bcfc60ecd78a819e1ce28c8bfb9 Mon Sep 17 00:00:00 2001 From: Jes Sorensen Date: Fri, 16 May 2014 10:05:04 +0200 Subject: staging: rtl8723au: Use correct pipe type for USB interrupts Use a correct pipe type when filling un interrupt urbs. This should finally take care of the WARN() messages on the console when USB urbs are submitted. Signed-off-by: Jes Sorensen Signed-off-by: Greg Kroah-Hartman --- drivers/staging/rtl8723au/os_dep/usb_ops_linux.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/staging/rtl8723au/os_dep/usb_ops_linux.c b/drivers/staging/rtl8723au/os_dep/usb_ops_linux.c index c49160e477d8..07e542e5d156 100644 --- a/drivers/staging/rtl8723au/os_dep/usb_ops_linux.c +++ b/drivers/staging/rtl8723au/os_dep/usb_ops_linux.c @@ -26,7 +26,7 @@ unsigned int ffaddr2pipehdl23a(struct dvobj_priv *pdvobj, u32 addr) if (addr == RECV_BULK_IN_ADDR) { pipe = usb_rcvbulkpipe(pusbd, pdvobj->RtInPipe[0]); } else if (addr == RECV_INT_IN_ADDR) { - pipe = usb_rcvbulkpipe(pusbd, pdvobj->RtInPipe[1]); + pipe = usb_rcvintpipe(pusbd, pdvobj->RtInPipe[1]); } else if (addr < HW_QUEUE_ENTRY) { ep_num = pdvobj->Queue2Pipe[addr]; pipe = usb_sndbulkpipe(pusbd, ep_num); -- cgit v1.2.1 From 07d1d29ee1e194b932328ad2dc1d40297062ab7f Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Fri, 16 May 2014 21:10:41 +0200 Subject: ACPI / video: Revert native brightness quirk for ThinkPad T530 Seems it helps some users, but causes issues for other users: https://bugzilla.redhat.com/show_bug.cgi?id=1089545 So lets drop it for now until we've figured out a better fix. Fixes: 43d949024425 (ACPI / video: Add use_native_backlight quirks for more systems) References: https://bugzilla.redhat.com/show_bug.cgi?id=1089545 Cc: All applicable Signed-off-by: Hans de Goede Signed-off-by: Rafael J. Wysocki --- drivers/acpi/video.c | 8 -------- 1 file changed, 8 deletions(-) (limited to 'drivers') diff --git a/drivers/acpi/video.c b/drivers/acpi/video.c index 6c76a49be12e..f8bc5a755dda 100644 --- a/drivers/acpi/video.c +++ b/drivers/acpi/video.c @@ -473,14 +473,6 @@ static struct dmi_system_id video_dmi_table[] __initdata = { }, { .callback = video_set_use_native_backlight, - .ident = "ThinkPad T530", - .matches = { - DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"), - DMI_MATCH(DMI_PRODUCT_VERSION, "ThinkPad T530"), - }, - }, - { - .callback = video_set_use_native_backlight, .ident = "ThinkPad X1 Carbon", .matches = { DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"), -- cgit v1.2.1 From bb4e506565cfc0a2f534dfda1fb7ca5c26f7a604 Mon Sep 17 00:00:00 2001 From: Jes Sorensen Date: Fri, 16 May 2014 22:59:18 +0200 Subject: staging: rtl8723au: Do not reset wdev->iftype in netdev_close() wdev->ifdev should be set by .change_virtual_intf(). This solves the problem of WARN() messages on module unload. Signed-off-by: Jes Sorensen Signed-off-by: Greg Kroah-Hartman --- drivers/staging/rtl8723au/os_dep/os_intfs.c | 2 -- 1 file changed, 2 deletions(-) (limited to 'drivers') diff --git a/drivers/staging/rtl8723au/os_dep/os_intfs.c b/drivers/staging/rtl8723au/os_dep/os_intfs.c index 57eca7a45672..4fe751f7c2bf 100644 --- a/drivers/staging/rtl8723au/os_dep/os_intfs.c +++ b/drivers/staging/rtl8723au/os_dep/os_intfs.c @@ -953,8 +953,6 @@ static int netdev_close(struct net_device *pnetdev) #endif /* CONFIG_8723AU_P2P */ rtw_scan_abort23a(padapter); - /* set this at the end */ - padapter->rtw_wdev->iftype = NL80211_IFTYPE_MONITOR; RT_TRACE(_module_os_intfs_c_, _drv_info_, ("-871x_drv - drv_close\n")); DBG_8723A("-871x_drv - drv_close, bup =%d\n", padapter->bup); -- cgit v1.2.1 From d2c834abe2b39a2d5a6c38ef44de87c97cbb34b4 Mon Sep 17 00:00:00 2001 From: Tuomas Tynkkynen Date: Fri, 16 May 2014 16:50:20 +0300 Subject: clk: tegra: Fix wrong value written to PLLE_AUX The value written to PLLE_AUX was incorrect due to a wrong variable being used. Without this fix SATA does not work. Cc: stable@vger.kernel.org Signed-off-by: Tuomas Tynkkynen Tested-by: Mikko Perttunen Reviewed-by: Thierry Reding Tested-by: Thierry Reding Acked-by: Thierry Reding Signed-off-by: Mike Turquette [mturquette@linaro.org: improved changelog] --- drivers/clk/tegra/clk-pll.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/clk/tegra/clk-pll.c b/drivers/clk/tegra/clk-pll.c index 0d20241e0770..e1769addf435 100644 --- a/drivers/clk/tegra/clk-pll.c +++ b/drivers/clk/tegra/clk-pll.c @@ -1718,7 +1718,7 @@ struct clk *tegra_clk_register_plle_tegra114(const char *name, "pll_re_vco"); } else { val_aux &= ~(PLLE_AUX_PLLRE_SEL | PLLE_AUX_PLLP_SEL); - pll_writel(val, pll_params->aux_reg, pll); + pll_writel(val_aux, pll_params->aux_reg, pll); } clk = _tegra_clk_register_pll(pll, name, parent_name, flags, -- cgit v1.2.1 From f9c6d4987b23e0a514464bae6771933a48e4cd01 Mon Sep 17 00:00:00 2001 From: Theodore Ts'o Date: Fri, 16 May 2014 21:40:41 -0400 Subject: random: fix BUG_ON caused by accounting simplification Commit ee1de406ba6eb1 ("random: simplify accounting logic") simplified things too much, in that it allows the following to trigger an overflow that results in a BUG_ON crash: dd if=/dev/urandom of=/dev/zero bs=67108707 count=1 Thanks to Peter Zihlstra for discovering the crash, and Hannes Frederic for analyizing the root cause. Signed-off-by: "Theodore Ts'o" Reported-by: Peter Zijlstra Reported-by: Hannes Frederic Sowa Cc: Greg Price --- drivers/char/random.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/char/random.c b/drivers/char/random.c index 6b75713d953a..102c50d38902 100644 --- a/drivers/char/random.c +++ b/drivers/char/random.c @@ -995,8 +995,11 @@ retry: ibytes = min_t(size_t, ibytes, have_bytes - reserved); if (ibytes < min) ibytes = 0; - entropy_count = max_t(int, 0, - entropy_count - (ibytes << (ENTROPY_SHIFT + 3))); + if (have_bytes >= ibytes + reserved) + entropy_count -= ibytes << (ENTROPY_SHIFT + 3); + else + entropy_count = reserved << (ENTROPY_SHIFT + 3); + if (cmpxchg(&r->entropy_count, orig, entropy_count) != orig) goto retry; -- cgit v1.2.1 From 1e1110c43b1cda9fe77fc4a04835e460550e6b3c Mon Sep 17 00:00:00 2001 From: Mikulas Patocka Date: Sat, 17 May 2014 06:49:22 -0400 Subject: target: fix memory leak on XCOPY On each processed XCOPY command, two "kmalloc-512" memory objects are leaked. These represent two allocations of struct xcopy_pt_cmd in target_core_xcopy.c. The reason for the memory leak is that the cmd_kref field is not initialized (thus, it is zero because the allocations were done with kzalloc). When we decrement zero kref in target_put_sess_cmd, the result is not zero, thus target_release_cmd_kref is not called. This patch fixes the bug by moving kref initialization from target_get_sess_cmd to transport_init_se_cmd (this function is called from target_core_xcopy.c, so it will correctly initialize cmd_kref). It can be easily verified that all code that calls target_get_sess_cmd also calls transport_init_se_cmd earlier, thus moving kref_init shouldn't introduce any new problems. Signed-off-by: Mikulas Patocka Cc: stable@vger.kernel.org # 3.12+ Signed-off-by: Nicholas Bellinger --- drivers/target/target_core_transport.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/target/target_core_transport.c b/drivers/target/target_core_transport.c index d4b98690a736..789aa9eb0a1e 100644 --- a/drivers/target/target_core_transport.c +++ b/drivers/target/target_core_transport.c @@ -1113,6 +1113,7 @@ void transport_init_se_cmd( init_completion(&cmd->cmd_wait_comp); init_completion(&cmd->task_stop_comp); spin_lock_init(&cmd->t_state_lock); + kref_init(&cmd->cmd_kref); cmd->transport_state = CMD_T_DEV_ACTIVE; cmd->se_tfo = tfo; @@ -2357,7 +2358,6 @@ int target_get_sess_cmd(struct se_session *se_sess, struct se_cmd *se_cmd, unsigned long flags; int ret = 0; - kref_init(&se_cmd->cmd_kref); /* * Add a second kref if the fabric caller is expecting to handle * fabric acknowledgement that requires two target_put_sess_cmd() -- cgit v1.2.1 From d0b4cc4e32705ff00d90d32da7783c266c702c04 Mon Sep 17 00:00:00 2001 From: Gavin Shan Date: Mon, 19 May 2014 13:06:46 +1000 Subject: PCI: Wrong register used to check pending traffic The incorrect register offset is passed to pci_wait_for_pending(), which is caused by commit 157e876ffe ("PCI: Add pci_wait_for_pending() (refactor pci_wait_for_pending_transaction())"). Fixes: 157e876ffe ("PCI: Add pci_wait_for_pending() (refactor pci_wait_for_pending_transaction()) Signed-off-by: Gavin Shan Signed-off-by: Bjorn Helgaas Acked-by: Alex Williamson CC: stable@vger.kernel.org # v3.14+ --- drivers/pci/pci.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c index 7325d43bf030..759475ef6ff3 100644 --- a/drivers/pci/pci.c +++ b/drivers/pci/pci.c @@ -3067,7 +3067,8 @@ int pci_wait_for_pending_transaction(struct pci_dev *dev) if (!pci_is_pcie(dev)) return 1; - return pci_wait_for_pending(dev, PCI_EXP_DEVSTA, PCI_EXP_DEVSTA_TRPND); + return pci_wait_for_pending(dev, pci_pcie_cap(dev) + PCI_EXP_DEVSTA, + PCI_EXP_DEVSTA_TRPND); } EXPORT_SYMBOL(pci_wait_for_pending_transaction); @@ -3109,7 +3110,7 @@ static int pci_af_flr(struct pci_dev *dev, int probe) return 0; /* Wait for Transaction Pending bit clean */ - if (pci_wait_for_pending(dev, PCI_AF_STATUS, PCI_AF_STATUS_TP)) + if (pci_wait_for_pending(dev, pos + PCI_AF_STATUS, PCI_AF_STATUS_TP)) goto clear; dev_err(&dev->dev, "transaction is not cleared; " -- cgit v1.2.1 From 3685f2516116c5f3b9d498d531955ad70216ad84 Mon Sep 17 00:00:00 2001 From: Shawn Guo Date: Sat, 17 May 2014 20:46:01 +0800 Subject: ahci: imx: PLL clock needs 100us to settle down The commit e783c51 (ahci: imx: software workaround for phy reset issue in resume) calls imx_sata_phy_reset() to reset phy immediately after SATA MPLL is enabled. It seems working fine mostly, but fails in some case as below. ... ahci-imx 2200000.sata: failed to reset phy: -110 ahci-imx: probe of 2200000.sata failed with error -110 After talking to the designer, we learnt that when enabling i.MX6Q SATA MPLL, we need to wait 100us for it to settle down for safety. Add this required delay to fix above failure. Signed-off-by: Shawn Guo Tested-by: Fabio Estevam Signed-off-by: Tejun Heo --- drivers/ata/ahci_imx.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'drivers') diff --git a/drivers/ata/ahci_imx.c b/drivers/ata/ahci_imx.c index 5824d99e63fd..8befeb69eeb1 100644 --- a/drivers/ata/ahci_imx.c +++ b/drivers/ata/ahci_imx.c @@ -258,6 +258,8 @@ static int imx_sata_enable(struct ahci_host_priv *hpriv) IMX6Q_GPR13_SATA_MPLL_CLK_EN, IMX6Q_GPR13_SATA_MPLL_CLK_EN); + usleep_range(100, 200); + ret = imx_sata_phy_reset(hpriv); if (ret) { dev_err(dev, "failed to reset phy: %d\n", ret); -- cgit v1.2.1