From 40dd46048c155b8f0683f468c950a1c107f77a7c Mon Sep 17 00:00:00 2001 From: Daniele Palmas Date: Wed, 3 May 2017 10:28:54 +0200 Subject: usb: serial: option: add Telit ME910 support This patch adds support for Telit ME910 PID 0x1100. Signed-off-by: Daniele Palmas Cc: stable Signed-off-by: Johan Hovold --- drivers/usb/serial/option.c | 8 ++++++++ 1 file changed, 8 insertions(+) (limited to 'drivers/usb') diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c index af67a0de6b5d..3bf61acfc26b 100644 --- a/drivers/usb/serial/option.c +++ b/drivers/usb/serial/option.c @@ -281,6 +281,7 @@ static void option_instat_callback(struct urb *urb); #define TELIT_PRODUCT_LE922_USBCFG0 0x1042 #define TELIT_PRODUCT_LE922_USBCFG3 0x1043 #define TELIT_PRODUCT_LE922_USBCFG5 0x1045 +#define TELIT_PRODUCT_ME910 0x1100 #define TELIT_PRODUCT_LE920 0x1200 #define TELIT_PRODUCT_LE910 0x1201 #define TELIT_PRODUCT_LE910_USBCFG4 0x1206 @@ -640,6 +641,11 @@ static const struct option_blacklist_info simcom_sim7100e_blacklist = { .reserved = BIT(5) | BIT(6), }; +static const struct option_blacklist_info telit_me910_blacklist = { + .sendsetup = BIT(0), + .reserved = BIT(1) | BIT(3), +}; + static const struct option_blacklist_info telit_le910_blacklist = { .sendsetup = BIT(0), .reserved = BIT(1) | BIT(2), @@ -1235,6 +1241,8 @@ static const struct usb_device_id option_ids[] = { .driver_info = (kernel_ulong_t)&telit_le922_blacklist_usbcfg3 }, { USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, TELIT_PRODUCT_LE922_USBCFG5, 0xff), .driver_info = (kernel_ulong_t)&telit_le922_blacklist_usbcfg0 }, + { USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_ME910), + .driver_info = (kernel_ulong_t)&telit_me910_blacklist }, { USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_LE910), .driver_info = (kernel_ulong_t)&telit_le910_blacklist }, { USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_LE910_USBCFG4), -- cgit v1.2.1 From bb246681b3ed0967489a7401ad528c1aaa1a4c2e Mon Sep 17 00:00:00 2001 From: Anthony Mallet Date: Fri, 5 May 2017 17:30:16 +0200 Subject: USB: serial: ftdi_sio: fix setting latency for unprivileged users Commit 557aaa7ffab6 ("ft232: support the ASYNC_LOW_LATENCY flag") enables unprivileged users to set the FTDI latency timer, but there was a logic flaw that skipped sending the corresponding USB control message to the device. Specifically, the device latency timer would not be updated until next open, something which was later also inadvertently broken by commit c19db4c9e49a ("USB: ftdi_sio: set device latency timeout at port probe"). A recent commit c6dce2626606 ("USB: serial: ftdi_sio: fix extreme low-latency setting") disabled the low-latency mode by default so we now need this fix to allow unprivileged users to again enable it. Signed-off-by: Anthony Mallet [johan: amend commit message] Fixes: 557aaa7ffab6 ("ft232: support the ASYNC_LOW_LATENCY flag") Fixes: c19db4c9e49a ("USB: ftdi_sio: set device latency timeout at port probe"). Cc: stable # 2.6.31 Signed-off-by: Johan Hovold --- drivers/usb/serial/ftdi_sio.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/usb') diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c index d38780fa8788..0e634c11abbf 100644 --- a/drivers/usb/serial/ftdi_sio.c +++ b/drivers/usb/serial/ftdi_sio.c @@ -1527,9 +1527,9 @@ static int set_serial_info(struct tty_struct *tty, (new_serial.flags & ASYNC_FLAGS)); priv->custom_divisor = new_serial.custom_divisor; +check_and_exit: write_latency_timer(port); -check_and_exit: if ((old_priv.flags & ASYNC_SPD_MASK) != (priv->flags & ASYNC_SPD_MASK)) { if ((priv->flags & ASYNC_SPD_MASK) == ASYNC_SPD_HI) -- cgit v1.2.1 From ad0ccac76dcc92c3331f4c94c9fc54f8bf1ab20c Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Thu, 11 May 2017 11:41:19 +0200 Subject: USB: serial: ir-usb: fix big-endian baud-rate debug printk Add missing endianness conversion when printing the supported baud rates. Found using sparse: warning: restricted __le16 degrades to integer Fixes: e0d795e4f36c ("usb: irda: cleanup on ir-usb module") Reviewed-by: Greg Kroah-Hartman Signed-off-by: Johan Hovold --- drivers/usb/serial/ir-usb.c | 21 ++++++++++++--------- 1 file changed, 12 insertions(+), 9 deletions(-) (limited to 'drivers/usb') diff --git a/drivers/usb/serial/ir-usb.c b/drivers/usb/serial/ir-usb.c index 73956d48a0c5..f9734a96d516 100644 --- a/drivers/usb/serial/ir-usb.c +++ b/drivers/usb/serial/ir-usb.c @@ -197,6 +197,7 @@ static u8 ir_xbof_change(u8 xbof) static int ir_startup(struct usb_serial *serial) { struct usb_irda_cs_descriptor *irda_desc; + int rates; irda_desc = irda_usb_find_class_desc(serial, 0); if (!irda_desc) { @@ -205,18 +206,20 @@ static int ir_startup(struct usb_serial *serial) return -ENODEV; } + rates = le16_to_cpu(irda_desc->wBaudRate); + dev_dbg(&serial->dev->dev, "%s - Baud rates supported:%s%s%s%s%s%s%s%s%s\n", __func__, - (irda_desc->wBaudRate & USB_IRDA_BR_2400) ? " 2400" : "", - (irda_desc->wBaudRate & USB_IRDA_BR_9600) ? " 9600" : "", - (irda_desc->wBaudRate & USB_IRDA_BR_19200) ? " 19200" : "", - (irda_desc->wBaudRate & USB_IRDA_BR_38400) ? " 38400" : "", - (irda_desc->wBaudRate & USB_IRDA_BR_57600) ? " 57600" : "", - (irda_desc->wBaudRate & USB_IRDA_BR_115200) ? " 115200" : "", - (irda_desc->wBaudRate & USB_IRDA_BR_576000) ? " 576000" : "", - (irda_desc->wBaudRate & USB_IRDA_BR_1152000) ? " 1152000" : "", - (irda_desc->wBaudRate & USB_IRDA_BR_4000000) ? " 4000000" : ""); + (rates & USB_IRDA_BR_2400) ? " 2400" : "", + (rates & USB_IRDA_BR_9600) ? " 9600" : "", + (rates & USB_IRDA_BR_19200) ? " 19200" : "", + (rates & USB_IRDA_BR_38400) ? " 38400" : "", + (rates & USB_IRDA_BR_57600) ? " 57600" : "", + (rates & USB_IRDA_BR_115200) ? " 115200" : "", + (rates & USB_IRDA_BR_576000) ? " 576000" : "", + (rates & USB_IRDA_BR_1152000) ? " 1152000" : "", + (rates & USB_IRDA_BR_4000000) ? " 4000000" : ""); switch (irda_desc->bmAdditionalBOFs) { case USB_IRDA_AB_48: -- cgit v1.2.1 From 26cede343656c0bc2c33cdc783771282405c7fb2 Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Thu, 11 May 2017 11:41:20 +0200 Subject: USB: serial: mct_u232: fix big-endian baud-rate handling Drop erroneous cpu_to_le32 when setting the baud rate, something which corrupted the divisor on big-endian hosts. Found using sparse: warning: incorrect type in argument 1 (different base types) expected unsigned int [unsigned] [usertype] val got restricted __le32 [usertype] Fixes: af2ac1a091bc ("USB: serial mct_usb232: move DMA buffers to heap") Cc: stable # 2.6.34 Reviewed-by: Greg Kroah-Hartman Acked-By: Pete Zaitcev Signed-off-by: Johan Hovold --- drivers/usb/serial/mct_u232.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/usb') diff --git a/drivers/usb/serial/mct_u232.c b/drivers/usb/serial/mct_u232.c index edbc81f205c2..70f346f1aa86 100644 --- a/drivers/usb/serial/mct_u232.c +++ b/drivers/usb/serial/mct_u232.c @@ -189,7 +189,7 @@ static int mct_u232_set_baud_rate(struct tty_struct *tty, return -ENOMEM; divisor = mct_u232_calculate_baud_rate(serial, value, &speed); - put_unaligned_le32(cpu_to_le32(divisor), buf); + put_unaligned_le32(divisor, buf); rc = usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0), MCT_U232_SET_BAUD_RATE_REQUEST, MCT_U232_SET_REQUEST_TYPE, -- cgit v1.2.1 From 6aeb75e6adfaed16e58780309613a578fe1ee90b Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Thu, 11 May 2017 11:41:21 +0200 Subject: USB: serial: io_ti: fix div-by-zero in set_termios Fix a division-by-zero in set_termios when debugging is enabled and a high-enough speed has been requested so that the divisor value becomes zero. Instead of just fixing the offending debug statement, cap the baud rate at the base as a zero divisor value also appears to crash the firmware. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Cc: stable # 2.6.12 Reviewed-by: Greg Kroah-Hartman Signed-off-by: Johan Hovold --- drivers/usb/serial/io_ti.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) (limited to 'drivers/usb') diff --git a/drivers/usb/serial/io_ti.c b/drivers/usb/serial/io_ti.c index 87798e625d6c..6cefb9cb133d 100644 --- a/drivers/usb/serial/io_ti.c +++ b/drivers/usb/serial/io_ti.c @@ -2336,8 +2336,11 @@ static void change_port_settings(struct tty_struct *tty, if (!baud) { /* pick a default, any default... */ baud = 9600; - } else + } else { + /* Avoid a zero divisor. */ + baud = min(baud, 461550); tty_encode_baud_rate(tty, baud, baud); + } edge_port->baud_rate = baud; config->wBaudRate = (__u16)((461550L + baud/2) / baud); -- cgit v1.2.1 From 682179592e48fa66056fbad1a86604be4992f885 Mon Sep 17 00:00:00 2001 From: Heikki Krogerus Date: Fri, 1 Apr 2016 17:13:13 +0300 Subject: usb: dwc3: pci: add Intel Cannonlake PCI IDs Intel Cannonlake PCH has the same DWC3 than Intel Sunrisepoint. Add the new IDs to the supported devices. Signed-off-by: Heikki Krogerus Signed-off-by: Felipe Balbi --- drivers/usb/dwc3/dwc3-pci.c | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'drivers/usb') diff --git a/drivers/usb/dwc3/dwc3-pci.c b/drivers/usb/dwc3/dwc3-pci.c index a15ec71d0423..84a2cebfc712 100644 --- a/drivers/usb/dwc3/dwc3-pci.c +++ b/drivers/usb/dwc3/dwc3-pci.c @@ -39,6 +39,8 @@ #define PCI_DEVICE_ID_INTEL_APL 0x5aaa #define PCI_DEVICE_ID_INTEL_KBP 0xa2b0 #define PCI_DEVICE_ID_INTEL_GLK 0x31aa +#define PCI_DEVICE_ID_INTEL_CNPLP 0x9dee +#define PCI_DEVICE_ID_INTEL_CNPH 0xa36e #define PCI_INTEL_BXT_DSM_UUID "732b85d5-b7a7-4a1b-9ba0-4bbd00ffd511" #define PCI_INTEL_BXT_FUNC_PMU_PWR 4 @@ -270,6 +272,8 @@ static const struct pci_device_id dwc3_pci_id_table[] = { { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_APL), }, { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_KBP), }, { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_GLK), }, + { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_CNPLP), }, + { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_CNPH), }, { PCI_DEVICE(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_NL_USB), }, { } /* Terminating Entry */ }; -- cgit v1.2.1 From f1d6826cae30e97e37a1f2481d7e1dc4faa09ce1 Mon Sep 17 00:00:00 2001 From: Roger Quadros Date: Fri, 21 Apr 2017 15:58:08 +0300 Subject: usb: dwc3: gadget: Fix ISO transfer performance Commit 08a36b543803 ("usb: dwc3: gadget: simplify __dwc3_gadget_ep_queue()") caused a small change in the way ISO transfer is handled in the case when XferInProgress event happens on Isoc EP with an active transfer. This caused a performance degradation of 50%. e.g. using g_webcam on DUT and luvcview on host the video frame rate dropped from 16fps to 8fps @high-speed. Make the ISO transfer handling equivalent to that prior to that commit to get back the original ISO performance numbers. Fixes: 08a36b543803 ("usb: dwc3: gadget: simplify __dwc3_gadget_ep_queue()") Signed-off-by: Roger Quadros Signed-off-by: Felipe Balbi --- drivers/usb/dwc3/gadget.c | 12 +++++++++++- 1 file changed, 11 insertions(+), 1 deletion(-) (limited to 'drivers/usb') diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c index 6f6f0b3be3ad..3d6180805eb8 100644 --- a/drivers/usb/dwc3/gadget.c +++ b/drivers/usb/dwc3/gadget.c @@ -1261,14 +1261,24 @@ static int __dwc3_gadget_ep_queue(struct dwc3_ep *dep, struct dwc3_request *req) __dwc3_gadget_start_isoc(dwc, dep, cur_uf); dep->flags &= ~DWC3_EP_PENDING_REQUEST; } + return 0; } - return 0; + + if ((dep->flags & DWC3_EP_BUSY) && + !(dep->flags & DWC3_EP_MISSED_ISOC)) { + WARN_ON_ONCE(!dep->resource_index); + ret = __dwc3_gadget_kick_transfer(dep, + dep->resource_index); + } + + goto out; } if (!dwc3_calc_trbs_left(dep)) return 0; ret = __dwc3_gadget_kick_transfer(dep, 0); +out: if (ret == -EBUSY) ret = 0; -- cgit v1.2.1 From d325a1de49d61ee11aca58a529571c91ecea7879 Mon Sep 17 00:00:00 2001 From: Thinh Nguyen Date: Thu, 11 May 2017 17:26:47 -0700 Subject: usb: dwc3: gadget: Prevent losing events in event cache The dwc3 driver can overwite its previous events if its top-half IRQ handler (TH) gets invoked again before processing the events in the cache. We see this as a hang in the file transfer and the host will attempt to reset the device. TH gets the event count and deasserts the interrupt line by writing DWC3_GEVNTSIZ_INTMASK to DWC3_GEVNTSIZ. If there's a new event coming between reading the event count and interrupt deassertion, dwc3 will lose previous pending events. More generally, we will see 0 event count, which should not affect anything. This shouldn't be possible in the current dwc3 implementation. However, through testing and reading the PCIe trace, the TH occasionally still gets invoked one more time after HW interrupt deassertion. (With PCIe legacy interrupts, TH is called repeatedly as long as the interrupt line is asserted). We suspect that there is a small detection delay in the SW. To avoid this issue, Check DWC3_EVENT_PENDING flag to determine if the events are processed in the bottom-half IRQ handler. If not, return IRQ_HANDLED and don't process new event. Cc: stable@vger.kernel.org Signed-off-by: Thinh Nguyen Signed-off-by: Felipe Balbi --- drivers/usb/dwc3/gadget.c | 9 +++++++++ 1 file changed, 9 insertions(+) (limited to 'drivers/usb') diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c index 3d6180805eb8..aea9a5b948b4 100644 --- a/drivers/usb/dwc3/gadget.c +++ b/drivers/usb/dwc3/gadget.c @@ -3036,6 +3036,15 @@ static irqreturn_t dwc3_check_event_buf(struct dwc3_event_buffer *evt) return IRQ_HANDLED; } + /* + * With PCIe legacy interrupt, test shows that top-half irq handler can + * be called again after HW interrupt deassertion. Check if bottom-half + * irq event handler completes before caching new event to prevent + * losing events. + */ + if (evt->flags & DWC3_EVENT_PENDING) + return IRQ_HANDLED; + count = dwc3_readl(dwc->regs, DWC3_GEVNTCOUNT(0)); count &= DWC3_GEVNTCOUNT_MASK; if (!count) -- cgit v1.2.1 From 844cf8a9d51f1d1e116d0bb18c353a2a94c70e79 Mon Sep 17 00:00:00 2001 From: Bogdan Mirea Date: Sun, 30 Apr 2017 13:21:26 +0300 Subject: usb: gadget: gserial: check if console kthread exists Check for bad pointer that may result because of kthread_create failure. This check is needed since the gserial setup callback function (gs_console_setup()) is only freeing the info->con_buf in case of kthread_create failure which will result into bad info->console_thread pointer. Without checking info->console_thread pointer validity in the gserial_console_exit() function, before calling kthread_stop(), the rmmod will generate Kernel Oops. Signed-off-by: Bogdan Mirea Signed-off-by: Felipe Balbi --- drivers/usb/gadget/function/u_serial.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/usb') diff --git a/drivers/usb/gadget/function/u_serial.c b/drivers/usb/gadget/function/u_serial.c index 000677c991b0..9b0805f55ad7 100644 --- a/drivers/usb/gadget/function/u_serial.c +++ b/drivers/usb/gadget/function/u_serial.c @@ -1256,7 +1256,7 @@ static void gserial_console_exit(void) struct gscons_info *info = &gscons_info; unregister_console(&gserial_cons); - if (info->console_thread != NULL) + if (!IS_ERR_OR_NULL(info->console_thread)) kthread_stop(info->console_thread); gs_buf_free(&info->con_buf); } -- cgit v1.2.1 From b7f73850bb4fac1e2209a4dd5e636d39be92f42c Mon Sep 17 00:00:00 2001 From: William Wu Date: Tue, 25 Apr 2017 17:45:48 +0800 Subject: usb: gadget: f_fs: avoid out of bounds access on comp_desc Companion descriptor is only used for SuperSpeed endpoints, if the endpoints are HighSpeed or FullSpeed, the Companion descriptor will not allocated, so we can only access it if gadget is SuperSpeed. I can reproduce this issue on Rockchip platform rk3368 SoC which supports USB 2.0, and use functionfs for ADB. Kernel build with CONFIG_KASAN=y and CONFIG_SLUB_DEBUG=y report the following BUG: ================================================================== BUG: KASAN: slab-out-of-bounds in ffs_func_set_alt+0x224/0x3a0 at addr ffffffc0601f6509 Read of size 1 by task swapper/0/0 ============================================================================ BUG kmalloc-256 (Not tainted): kasan: bad access detected ---------------------------------------------------------------------------- Disabling lock debugging due to kernel taint INFO: Allocated in ffs_func_bind+0x52c/0x99c age=1275 cpu=0 pid=1 alloc_debug_processing+0x128/0x17c ___slab_alloc.constprop.58+0x50c/0x610 __slab_alloc.isra.55.constprop.57+0x24/0x34 __kmalloc+0xe0/0x250 ffs_func_bind+0x52c/0x99c usb_add_function+0xd8/0x1d4 configfs_composite_bind+0x48c/0x570 udc_bind_to_driver+0x6c/0x170 usb_udc_attach_driver+0xa4/0xd0 gadget_dev_desc_UDC_store+0xcc/0x118 configfs_write_file+0x1a0/0x1f8 __vfs_write+0x64/0x174 vfs_write+0xe4/0x200 SyS_write+0x68/0xc8 el0_svc_naked+0x24/0x28 INFO: Freed in inode_doinit_with_dentry+0x3f0/0x7c4 age=1275 cpu=7 pid=247 ... Call trace: [] dump_backtrace+0x0/0x230 [] show_stack+0x14/0x1c [] dump_stack+0xa0/0xc8 [] print_trailer+0x188/0x198 [] object_err+0x3c/0x4c [] kasan_report+0x324/0x4dc [] __asan_load1+0x24/0x50 [] ffs_func_set_alt+0x224/0x3a0 [] composite_setup+0xdcc/0x1ac8 [] android_setup+0x124/0x1a0 [] _setup+0x54/0x74 [] handle_ep0+0x3288/0x4390 [] dwc_otg_pcd_handle_out_ep_intr+0x14dc/0x2ae4 [] dwc_otg_pcd_handle_intr+0x1ec/0x298 [] dwc_otg_pcd_irq+0x10/0x20 [] handle_irq_event_percpu+0x124/0x3ac [] handle_irq_event+0x60/0xa0 [] handle_fasteoi_irq+0x10c/0x1d4 [] generic_handle_irq+0x30/0x40 [] __handle_domain_irq+0xac/0xdc [] gic_handle_irq+0x64/0xa4 ... Memory state around the buggy address: ffffffc0601f6400: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ffffffc0601f6480: 00 00 00 00 00 00 00 00 00 00 06 fc fc fc fc fc >ffffffc0601f6500: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc ^ ffffffc0601f6580: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc ffffffc0601f6600: fc fc fc fc fc fc fc fc 00 00 00 00 00 00 00 00 ================================================================== Signed-off-by: William Wu Signed-off-by: Felipe Balbi --- drivers/usb/gadget/function/f_fs.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) (limited to 'drivers/usb') diff --git a/drivers/usb/gadget/function/f_fs.c b/drivers/usb/gadget/function/f_fs.c index 71dd27c0d7f2..47dda3450abd 100644 --- a/drivers/usb/gadget/function/f_fs.c +++ b/drivers/usb/gadget/function/f_fs.c @@ -1858,12 +1858,12 @@ static int ffs_func_eps_enable(struct ffs_function *func) ep->ep->driver_data = ep; ep->ep->desc = ds; - comp_desc = (struct usb_ss_ep_comp_descriptor *)(ds + - USB_DT_ENDPOINT_SIZE); - ep->ep->maxburst = comp_desc->bMaxBurst + 1; - - if (needs_comp_desc) + if (needs_comp_desc) { + comp_desc = (struct usb_ss_ep_comp_descriptor *)(ds + + USB_DT_ENDPOINT_SIZE); + ep->ep->maxburst = comp_desc->bMaxBurst + 1; ep->ep->comp_desc = comp_desc; + } ret = usb_ep_enable(ep->ep); if (likely(!ret)) { -- cgit v1.2.1 From 018047a1dba7636e1f7fdae2cc290a528991d648 Mon Sep 17 00:00:00 2001 From: Pan Bian Date: Sun, 23 Apr 2017 13:55:13 +0800 Subject: usb: dwc3: keystone: check return value Function devm_clk_get() returns an ERR_PTR when it fails. However, in function kdwc3_probe(), its return value is not checked, which may result in a bad memory access bug. This patch fixes the bug. Signed-off-by: Pan Bian Signed-off-by: Felipe Balbi --- drivers/usb/dwc3/dwc3-keystone.c | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'drivers/usb') diff --git a/drivers/usb/dwc3/dwc3-keystone.c b/drivers/usb/dwc3/dwc3-keystone.c index 72664700b8a2..12ee23f53cdd 100644 --- a/drivers/usb/dwc3/dwc3-keystone.c +++ b/drivers/usb/dwc3/dwc3-keystone.c @@ -107,6 +107,10 @@ static int kdwc3_probe(struct platform_device *pdev) return PTR_ERR(kdwc->usbss); kdwc->clk = devm_clk_get(kdwc->dev, "usb"); + if (IS_ERR(kdwc->clk)) { + dev_err(kdwc->dev, "unable to get usb clock\n"); + return PTR_ERR(kdwc->clk); + } error = clk_prepare_enable(kdwc->clk); if (error < 0) { -- cgit v1.2.1 From 5f63424ab7daac840df2b12dd5bcc5b38d50f779 Mon Sep 17 00:00:00 2001 From: Andrey Korolyov Date: Tue, 16 May 2017 23:54:41 +0300 Subject: USB: serial: ftdi_sio: add Olimex ARM-USB-TINY(H) PIDs This patch adds support for recognition of ARM-USB-TINY(H) devices which are almost identical to ARM-USB-OCD(H) but lacking separate barrel jack and serial console. By suggestion from Johan Hovold it is possible to replace ftdi_jtag_quirk with a bit more generic construction. Since all Olimex-ARM debuggers has exactly two ports, we could safely always use only second port within the debugger family. Signed-off-by: Andrey Korolyov Cc: stable Signed-off-by: Johan Hovold --- drivers/usb/serial/ftdi_sio.c | 8 ++++---- drivers/usb/serial/ftdi_sio_ids.h | 2 ++ 2 files changed, 6 insertions(+), 4 deletions(-) (limited to 'drivers/usb') diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c index 0e634c11abbf..aba74f817dc6 100644 --- a/drivers/usb/serial/ftdi_sio.c +++ b/drivers/usb/serial/ftdi_sio.c @@ -809,10 +809,10 @@ static const struct usb_device_id id_table_combined[] = { { USB_DEVICE(FTDI_VID, FTDI_PROPOX_ISPCABLEIII_PID) }, { USB_DEVICE(FTDI_VID, CYBER_CORTEX_AV_PID), .driver_info = (kernel_ulong_t)&ftdi_jtag_quirk }, - { USB_DEVICE(OLIMEX_VID, OLIMEX_ARM_USB_OCD_PID), - .driver_info = (kernel_ulong_t)&ftdi_jtag_quirk }, - { USB_DEVICE(OLIMEX_VID, OLIMEX_ARM_USB_OCD_H_PID), - .driver_info = (kernel_ulong_t)&ftdi_jtag_quirk }, + { USB_DEVICE_INTERFACE_NUMBER(OLIMEX_VID, OLIMEX_ARM_USB_OCD_PID, 1) }, + { USB_DEVICE_INTERFACE_NUMBER(OLIMEX_VID, OLIMEX_ARM_USB_OCD_H_PID, 1) }, + { USB_DEVICE_INTERFACE_NUMBER(OLIMEX_VID, OLIMEX_ARM_USB_TINY_PID, 1) }, + { USB_DEVICE_INTERFACE_NUMBER(OLIMEX_VID, OLIMEX_ARM_USB_TINY_H_PID, 1) }, { USB_DEVICE(FIC_VID, FIC_NEO1973_DEBUG_PID), .driver_info = (kernel_ulong_t)&ftdi_jtag_quirk }, { USB_DEVICE(FTDI_VID, FTDI_OOCDLINK_PID), diff --git a/drivers/usb/serial/ftdi_sio_ids.h b/drivers/usb/serial/ftdi_sio_ids.h index 71fb9e59db71..4fcf1cecb6d7 100644 --- a/drivers/usb/serial/ftdi_sio_ids.h +++ b/drivers/usb/serial/ftdi_sio_ids.h @@ -882,6 +882,8 @@ /* Olimex */ #define OLIMEX_VID 0x15BA #define OLIMEX_ARM_USB_OCD_PID 0x0003 +#define OLIMEX_ARM_USB_TINY_PID 0x0004 +#define OLIMEX_ARM_USB_TINY_H_PID 0x002a #define OLIMEX_ARM_USB_OCD_H_PID 0x002b /* -- cgit v1.2.1 From 628c2893d44876ddd11602400c70606ade62e129 Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Tue, 16 May 2017 11:47:29 -0400 Subject: USB: ene_usb6250: fix DMA to the stack The ene_usb6250 sub-driver in usb-storage does USB I/O to buffers on the stack, which doesn't work with vmapped stacks. This patch fixes the problem by allocating a separate 512-byte buffer at probe time and using it for all of the offending I/O operations. Signed-off-by: Alan Stern Reported-and-tested-by: Andreas Hartmann CC: Signed-off-by: Greg Kroah-Hartman --- drivers/usb/storage/ene_ub6250.c | 90 ++++++++++++++++++++++++---------------- 1 file changed, 55 insertions(+), 35 deletions(-) (limited to 'drivers/usb') diff --git a/drivers/usb/storage/ene_ub6250.c b/drivers/usb/storage/ene_ub6250.c index 369f3c24815a..44af719194b2 100644 --- a/drivers/usb/storage/ene_ub6250.c +++ b/drivers/usb/storage/ene_ub6250.c @@ -446,6 +446,10 @@ struct ms_lib_ctrl { #define SD_BLOCK_LEN 9 struct ene_ub6250_info { + + /* I/O bounce buffer */ + u8 *bbuf; + /* for 6250 code */ struct SD_STATUS SD_Status; struct MS_STATUS MS_Status; @@ -493,8 +497,11 @@ static int ene_load_bincode(struct us_data *us, unsigned char flag); static void ene_ub6250_info_destructor(void *extra) { + struct ene_ub6250_info *info = (struct ene_ub6250_info *) extra; + if (!extra) return; + kfree(info->bbuf); } static int ene_send_scsi_cmd(struct us_data *us, u8 fDir, void *buf, int use_sg) @@ -860,8 +867,9 @@ static int ms_read_readpage(struct us_data *us, u32 PhyBlockAddr, u8 PageNum, u32 *PageBuf, struct ms_lib_type_extdat *ExtraDat) { struct bulk_cb_wrap *bcb = (struct bulk_cb_wrap *) us->iobuf; + struct ene_ub6250_info *info = (struct ene_ub6250_info *) us->extra; + u8 *bbuf = info->bbuf; int result; - u8 ExtBuf[4]; u32 bn = PhyBlockAddr * 0x20 + PageNum; result = ene_load_bincode(us, MS_RW_PATTERN); @@ -901,7 +909,7 @@ static int ms_read_readpage(struct us_data *us, u32 PhyBlockAddr, bcb->CDB[2] = (unsigned char)(PhyBlockAddr>>16); bcb->CDB[6] = 0x01; - result = ene_send_scsi_cmd(us, FDIR_READ, &ExtBuf, 0); + result = ene_send_scsi_cmd(us, FDIR_READ, bbuf, 0); if (result != USB_STOR_XFER_GOOD) return USB_STOR_TRANSPORT_ERROR; @@ -910,9 +918,9 @@ static int ms_read_readpage(struct us_data *us, u32 PhyBlockAddr, ExtraDat->status0 = 0x10; /* Not yet,fireware support */ ExtraDat->status1 = 0x00; /* Not yet,fireware support */ - ExtraDat->ovrflg = ExtBuf[0]; - ExtraDat->mngflg = ExtBuf[1]; - ExtraDat->logadr = memstick_logaddr(ExtBuf[2], ExtBuf[3]); + ExtraDat->ovrflg = bbuf[0]; + ExtraDat->mngflg = bbuf[1]; + ExtraDat->logadr = memstick_logaddr(bbuf[2], bbuf[3]); return USB_STOR_TRANSPORT_GOOD; } @@ -1332,8 +1340,9 @@ static int ms_lib_read_extra(struct us_data *us, u32 PhyBlock, u8 PageNum, struct ms_lib_type_extdat *ExtraDat) { struct bulk_cb_wrap *bcb = (struct bulk_cb_wrap *) us->iobuf; + struct ene_ub6250_info *info = (struct ene_ub6250_info *) us->extra; + u8 *bbuf = info->bbuf; int result; - u8 ExtBuf[4]; memset(bcb, 0, sizeof(struct bulk_cb_wrap)); bcb->Signature = cpu_to_le32(US_BULK_CB_SIGN); @@ -1347,7 +1356,7 @@ static int ms_lib_read_extra(struct us_data *us, u32 PhyBlock, bcb->CDB[2] = (unsigned char)(PhyBlock>>16); bcb->CDB[6] = 0x01; - result = ene_send_scsi_cmd(us, FDIR_READ, &ExtBuf, 0); + result = ene_send_scsi_cmd(us, FDIR_READ, bbuf, 0); if (result != USB_STOR_XFER_GOOD) return USB_STOR_TRANSPORT_ERROR; @@ -1355,9 +1364,9 @@ static int ms_lib_read_extra(struct us_data *us, u32 PhyBlock, ExtraDat->intr = 0x80; /* Not yet, waiting for fireware support */ ExtraDat->status0 = 0x10; /* Not yet, waiting for fireware support */ ExtraDat->status1 = 0x00; /* Not yet, waiting for fireware support */ - ExtraDat->ovrflg = ExtBuf[0]; - ExtraDat->mngflg = ExtBuf[1]; - ExtraDat->logadr = memstick_logaddr(ExtBuf[2], ExtBuf[3]); + ExtraDat->ovrflg = bbuf[0]; + ExtraDat->mngflg = bbuf[1]; + ExtraDat->logadr = memstick_logaddr(bbuf[2], bbuf[3]); return USB_STOR_TRANSPORT_GOOD; } @@ -1556,9 +1565,9 @@ static int ms_lib_scan_logicalblocknumber(struct us_data *us, u16 btBlk1st) u16 PhyBlock, newblk, i; u16 LogStart, LogEnde; struct ms_lib_type_extdat extdat; - u8 buf[0x200]; u32 count = 0, index = 0; struct ene_ub6250_info *info = (struct ene_ub6250_info *) us->extra; + u8 *bbuf = info->bbuf; for (PhyBlock = 0; PhyBlock < info->MS_Lib.NumberOfPhyBlock;) { ms_lib_phy_to_log_range(PhyBlock, &LogStart, &LogEnde); @@ -1572,14 +1581,16 @@ static int ms_lib_scan_logicalblocknumber(struct us_data *us, u16 btBlk1st) } if (count == PhyBlock) { - ms_lib_read_extrablock(us, PhyBlock, 0, 0x80, &buf); + ms_lib_read_extrablock(us, PhyBlock, 0, 0x80, + bbuf); count += 0x80; } index = (PhyBlock % 0x80) * 4; - extdat.ovrflg = buf[index]; - extdat.mngflg = buf[index+1]; - extdat.logadr = memstick_logaddr(buf[index+2], buf[index+3]); + extdat.ovrflg = bbuf[index]; + extdat.mngflg = bbuf[index+1]; + extdat.logadr = memstick_logaddr(bbuf[index+2], + bbuf[index+3]); if ((extdat.ovrflg & MS_REG_OVR_BKST) != MS_REG_OVR_BKST_OK) { ms_lib_setacquired_errorblock(us, PhyBlock); @@ -2062,9 +2073,9 @@ static int ene_ms_init(struct us_data *us) { struct bulk_cb_wrap *bcb = (struct bulk_cb_wrap *) us->iobuf; int result; - u8 buf[0x200]; u16 MSP_BlockSize, MSP_UserAreaBlocks; struct ene_ub6250_info *info = (struct ene_ub6250_info *) us->extra; + u8 *bbuf = info->bbuf; printk(KERN_INFO "transport --- ENE_MSInit\n"); @@ -2083,13 +2094,13 @@ static int ene_ms_init(struct us_data *us) bcb->CDB[0] = 0xF1; bcb->CDB[1] = 0x01; - result = ene_send_scsi_cmd(us, FDIR_READ, &buf, 0); + result = ene_send_scsi_cmd(us, FDIR_READ, bbuf, 0); if (result != USB_STOR_XFER_GOOD) { printk(KERN_ERR "Execution MS Init Code Fail !!\n"); return USB_STOR_TRANSPORT_ERROR; } /* the same part to test ENE */ - info->MS_Status = *(struct MS_STATUS *)&buf[0]; + info->MS_Status = *(struct MS_STATUS *) bbuf; if (info->MS_Status.Insert && info->MS_Status.Ready) { printk(KERN_INFO "Insert = %x\n", info->MS_Status.Insert); @@ -2098,15 +2109,15 @@ static int ene_ms_init(struct us_data *us) printk(KERN_INFO "IsMSPHG = %x\n", info->MS_Status.IsMSPHG); printk(KERN_INFO "WtP= %x\n", info->MS_Status.WtP); if (info->MS_Status.IsMSPro) { - MSP_BlockSize = (buf[6] << 8) | buf[7]; - MSP_UserAreaBlocks = (buf[10] << 8) | buf[11]; + MSP_BlockSize = (bbuf[6] << 8) | bbuf[7]; + MSP_UserAreaBlocks = (bbuf[10] << 8) | bbuf[11]; info->MSP_TotalBlock = MSP_BlockSize * MSP_UserAreaBlocks; } else { ms_card_init(us); /* Card is MS (to ms.c)*/ } usb_stor_dbg(us, "MS Init Code OK !!\n"); } else { - usb_stor_dbg(us, "MS Card Not Ready --- %x\n", buf[0]); + usb_stor_dbg(us, "MS Card Not Ready --- %x\n", bbuf[0]); return USB_STOR_TRANSPORT_ERROR; } @@ -2116,9 +2127,9 @@ static int ene_ms_init(struct us_data *us) static int ene_sd_init(struct us_data *us) { int result; - u8 buf[0x200]; struct bulk_cb_wrap *bcb = (struct bulk_cb_wrap *) us->iobuf; struct ene_ub6250_info *info = (struct ene_ub6250_info *) us->extra; + u8 *bbuf = info->bbuf; usb_stor_dbg(us, "transport --- ENE_SDInit\n"); /* SD Init Part-1 */ @@ -2152,17 +2163,17 @@ static int ene_sd_init(struct us_data *us) bcb->Flags = US_BULK_FLAG_IN; bcb->CDB[0] = 0xF1; - result = ene_send_scsi_cmd(us, FDIR_READ, &buf, 0); + result = ene_send_scsi_cmd(us, FDIR_READ, bbuf, 0); if (result != USB_STOR_XFER_GOOD) { usb_stor_dbg(us, "Execution SD Init Code Fail !!\n"); return USB_STOR_TRANSPORT_ERROR; } - info->SD_Status = *(struct SD_STATUS *)&buf[0]; + info->SD_Status = *(struct SD_STATUS *) bbuf; if (info->SD_Status.Insert && info->SD_Status.Ready) { struct SD_STATUS *s = &info->SD_Status; - ene_get_card_status(us, (unsigned char *)&buf); + ene_get_card_status(us, bbuf); usb_stor_dbg(us, "Insert = %x\n", s->Insert); usb_stor_dbg(us, "Ready = %x\n", s->Ready); usb_stor_dbg(us, "IsMMC = %x\n", s->IsMMC); @@ -2170,7 +2181,7 @@ static int ene_sd_init(struct us_data *us) usb_stor_dbg(us, "HiSpeed = %x\n", s->HiSpeed); usb_stor_dbg(us, "WtP = %x\n", s->WtP); } else { - usb_stor_dbg(us, "SD Card Not Ready --- %x\n", buf[0]); + usb_stor_dbg(us, "SD Card Not Ready --- %x\n", bbuf[0]); return USB_STOR_TRANSPORT_ERROR; } return USB_STOR_TRANSPORT_GOOD; @@ -2180,13 +2191,15 @@ static int ene_sd_init(struct us_data *us) static int ene_init(struct us_data *us) { int result; - u8 misc_reg03 = 0; + u8 misc_reg03; struct ene_ub6250_info *info = (struct ene_ub6250_info *)(us->extra); + u8 *bbuf = info->bbuf; - result = ene_get_card_type(us, REG_CARD_STATUS, &misc_reg03); + result = ene_get_card_type(us, REG_CARD_STATUS, bbuf); if (result != USB_STOR_XFER_GOOD) return USB_STOR_TRANSPORT_ERROR; + misc_reg03 = bbuf[0]; if (misc_reg03 & 0x01) { if (!info->SD_Status.Ready) { result = ene_sd_init(us); @@ -2303,8 +2316,9 @@ static int ene_ub6250_probe(struct usb_interface *intf, const struct usb_device_id *id) { int result; - u8 misc_reg03 = 0; + u8 misc_reg03; struct us_data *us; + struct ene_ub6250_info *info; result = usb_stor_probe1(&us, intf, id, (id - ene_ub6250_usb_ids) + ene_ub6250_unusual_dev_list, @@ -2313,11 +2327,16 @@ static int ene_ub6250_probe(struct usb_interface *intf, return result; /* FIXME: where should the code alloc extra buf ? */ - if (!us->extra) { - us->extra = kzalloc(sizeof(struct ene_ub6250_info), GFP_KERNEL); - if (!us->extra) - return -ENOMEM; - us->extra_destructor = ene_ub6250_info_destructor; + us->extra = kzalloc(sizeof(struct ene_ub6250_info), GFP_KERNEL); + if (!us->extra) + return -ENOMEM; + us->extra_destructor = ene_ub6250_info_destructor; + + info = (struct ene_ub6250_info *)(us->extra); + info->bbuf = kmalloc(512, GFP_KERNEL); + if (!info->bbuf) { + kfree(us->extra); + return -ENOMEM; } us->transport_name = "ene_ub6250"; @@ -2329,12 +2348,13 @@ static int ene_ub6250_probe(struct usb_interface *intf, return result; /* probe card type */ - result = ene_get_card_type(us, REG_CARD_STATUS, &misc_reg03); + result = ene_get_card_type(us, REG_CARD_STATUS, info->bbuf); if (result != USB_STOR_XFER_GOOD) { usb_stor_disconnect(intf); return USB_STOR_TRANSPORT_ERROR; } + misc_reg03 = info->bbuf[0]; if (!(misc_reg03 & 0x01)) { pr_info("ums_eneub6250: This driver only supports SD/MS cards. " "It does not support SM cards.\n"); -- cgit v1.2.1 From 2f964780c03b73de269b08d12aff96a9618d13f3 Mon Sep 17 00:00:00 2001 From: Vamsi Krishna Samavedam Date: Tue, 16 May 2017 14:38:08 +0200 Subject: USB: core: replace %p with %pK Format specifier %p can leak kernel addresses while not valuing the kptr_restrict system settings. When kptr_restrict is set to (1), kernel pointers printed using the %pK format specifier will be replaced with Zeros. Debugging Note : &pK prints only Zeros as address. If you need actual address information, write 0 to kptr_restrict. echo 0 > /proc/sys/kernel/kptr_restrict [Found by poking around in a random vendor kernel tree, it would be nice if someone would actually send these types of patches upstream - gkh] Signed-off-by: Vamsi Krishna Samavedam Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/usb/core/devio.c | 14 +++++++------- drivers/usb/core/hcd.c | 4 ++-- drivers/usb/core/urb.c | 2 +- 3 files changed, 10 insertions(+), 10 deletions(-) (limited to 'drivers/usb') diff --git a/drivers/usb/core/devio.c b/drivers/usb/core/devio.c index cfc3cff6e8d5..8e6ef671be9b 100644 --- a/drivers/usb/core/devio.c +++ b/drivers/usb/core/devio.c @@ -475,11 +475,11 @@ static void snoop_urb(struct usb_device *udev, if (userurb) { /* Async */ if (when == SUBMIT) - dev_info(&udev->dev, "userurb %p, ep%d %s-%s, " + dev_info(&udev->dev, "userurb %pK, ep%d %s-%s, " "length %u\n", userurb, ep, t, d, length); else - dev_info(&udev->dev, "userurb %p, ep%d %s-%s, " + dev_info(&udev->dev, "userurb %pK, ep%d %s-%s, " "actual_length %u status %d\n", userurb, ep, t, d, length, timeout_or_status); @@ -1895,7 +1895,7 @@ static int proc_reapurb(struct usb_dev_state *ps, void __user *arg) if (as) { int retval; - snoop(&ps->dev->dev, "reap %p\n", as->userurb); + snoop(&ps->dev->dev, "reap %pK\n", as->userurb); retval = processcompl(as, (void __user * __user *)arg); free_async(as); return retval; @@ -1912,7 +1912,7 @@ static int proc_reapurbnonblock(struct usb_dev_state *ps, void __user *arg) as = async_getcompleted(ps); if (as) { - snoop(&ps->dev->dev, "reap %p\n", as->userurb); + snoop(&ps->dev->dev, "reap %pK\n", as->userurb); retval = processcompl(as, (void __user * __user *)arg); free_async(as); } else { @@ -2043,7 +2043,7 @@ static int proc_reapurb_compat(struct usb_dev_state *ps, void __user *arg) if (as) { int retval; - snoop(&ps->dev->dev, "reap %p\n", as->userurb); + snoop(&ps->dev->dev, "reap %pK\n", as->userurb); retval = processcompl_compat(as, (void __user * __user *)arg); free_async(as); return retval; @@ -2060,7 +2060,7 @@ static int proc_reapurbnonblock_compat(struct usb_dev_state *ps, void __user *ar as = async_getcompleted(ps); if (as) { - snoop(&ps->dev->dev, "reap %p\n", as->userurb); + snoop(&ps->dev->dev, "reap %pK\n", as->userurb); retval = processcompl_compat(as, (void __user * __user *)arg); free_async(as); } else { @@ -2489,7 +2489,7 @@ static long usbdev_do_ioctl(struct file *file, unsigned int cmd, #endif case USBDEVFS_DISCARDURB: - snoop(&dev->dev, "%s: DISCARDURB %p\n", __func__, p); + snoop(&dev->dev, "%s: DISCARDURB %pK\n", __func__, p); ret = proc_unlinkurb(ps, p); break; diff --git a/drivers/usb/core/hcd.c b/drivers/usb/core/hcd.c index 49550790a3cb..5235d6be1bdf 100644 --- a/drivers/usb/core/hcd.c +++ b/drivers/usb/core/hcd.c @@ -1723,7 +1723,7 @@ int usb_hcd_unlink_urb (struct urb *urb, int status) if (retval == 0) retval = -EINPROGRESS; else if (retval != -EIDRM && retval != -EBUSY) - dev_dbg(&udev->dev, "hcd_unlink_urb %p fail %d\n", + dev_dbg(&udev->dev, "hcd_unlink_urb %pK fail %d\n", urb, retval); usb_put_dev(udev); } @@ -1890,7 +1890,7 @@ rescan: /* kick hcd */ unlink1(hcd, urb, -ESHUTDOWN); dev_dbg (hcd->self.controller, - "shutdown urb %p ep%d%s%s\n", + "shutdown urb %pK ep%d%s%s\n", urb, usb_endpoint_num(&ep->desc), is_in ? "in" : "out", ({ char *s; diff --git a/drivers/usb/core/urb.c b/drivers/usb/core/urb.c index d75cb8c0f7df..47903d510955 100644 --- a/drivers/usb/core/urb.c +++ b/drivers/usb/core/urb.c @@ -338,7 +338,7 @@ int usb_submit_urb(struct urb *urb, gfp_t mem_flags) if (!urb || !urb->complete) return -EINVAL; if (urb->hcpriv) { - WARN_ONCE(1, "URB %p submitted while active\n", urb); + WARN_ONCE(1, "URB %pK submitted while active\n", urb); return -EBUSY; } -- cgit v1.2.1 From 0bd193d62b4270a2a7a09da43ad1034c7ca5b3d3 Mon Sep 17 00:00:00 2001 From: Maksim Salau Date: Sat, 13 May 2017 23:49:26 +0300 Subject: usb: misc: legousbtower: Fix memory leak get_version_reply is not freed if function returns with success. Fixes: 942a48730faf ("usb: misc: legousbtower: Fix buffers on stack") Reported-by: Heikki Krogerus Signed-off-by: Maksim Salau Signed-off-by: Greg Kroah-Hartman --- drivers/usb/misc/legousbtower.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers/usb') diff --git a/drivers/usb/misc/legousbtower.c b/drivers/usb/misc/legousbtower.c index aa3c280fdf8d..0782ac6f5edf 100644 --- a/drivers/usb/misc/legousbtower.c +++ b/drivers/usb/misc/legousbtower.c @@ -926,6 +926,7 @@ static int tower_probe (struct usb_interface *interface, const struct usb_device USB_MAJOR, dev->minor); exit: + kfree(get_version_reply); return retval; error: -- cgit v1.2.1 From 7cdfe4ddea47dbc66306edf802fd2ef86a6c8867 Mon Sep 17 00:00:00 2001 From: Jiri Slaby Date: Fri, 12 May 2017 10:06:29 +0200 Subject: sisusb_con: fix coccinelle warning After commit d705ff3818 (tty: vt, cleanup and document con_scroll), in the coccinelle output, we can see: drivers/usb/misc/sisusbvga/sisusb_con.c:852:8-9: WARNING: return of 0/1 in function 'sisusbcon_scroll_area' with return type bool Return true instead of 1 in the function returning bool which was intended to do in d705ff3818 but omitted. Signed-off-by: Jiri Slaby Fixes: d705ff3818 (tty: vt, cleanup and document con_scroll) Cc: Thomas Winischhofer Cc: Greg Kroah-Hartman Cc: linux-usb@vger.kernel.org Signed-off-by: Greg Kroah-Hartman --- drivers/usb/misc/sisusbvga/sisusb_con.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/usb') diff --git a/drivers/usb/misc/sisusbvga/sisusb_con.c b/drivers/usb/misc/sisusbvga/sisusb_con.c index 3c6948af726a..f019d80ca9e4 100644 --- a/drivers/usb/misc/sisusbvga/sisusb_con.c +++ b/drivers/usb/misc/sisusbvga/sisusb_con.c @@ -973,7 +973,7 @@ sisusbcon_set_origin(struct vc_data *c) mutex_unlock(&sisusb->lock); - return 1; + return true; } /* Interface routine */ -- cgit v1.2.1 From 63afd5cc78775018ea2dec4004428dafa5283e93 Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Thu, 11 May 2017 11:36:01 +0200 Subject: USB: chaoskey: fix Alea quirk on big-endian hosts Add missing endianness conversion when applying the Alea timeout quirk. Found using sparse: warning: restricted __le16 degrades to integer Fixes: e4a886e811cd ("hwrng: chaoskey - Fix URB warning due to timeout on Alea") Cc: stable # 4.8 Cc: Bob Ham Cc: Herbert Xu Cc: Keith Packard Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman --- drivers/usb/misc/chaoskey.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/usb') diff --git a/drivers/usb/misc/chaoskey.c b/drivers/usb/misc/chaoskey.c index e9cae4d82af2..15d4e64d3b65 100644 --- a/drivers/usb/misc/chaoskey.c +++ b/drivers/usb/misc/chaoskey.c @@ -192,7 +192,7 @@ static int chaoskey_probe(struct usb_interface *interface, dev->in_ep = in_ep; - if (udev->descriptor.idVendor != ALEA_VENDOR_ID) + if (le16_to_cpu(udev->descriptor.idVendor) != ALEA_VENDOR_ID) dev->reads_started = 1; dev->size = size; -- cgit v1.2.1 From dd5ca753fa92fb736b1395db892bd29f78e6d408 Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Thu, 11 May 2017 11:36:02 +0200 Subject: USB: iowarrior: fix info ioctl on big-endian hosts Drop erroneous le16_to_cpu when returning the USB device speed which is already in host byte order. Found using sparse: warning: cast to restricted __le16 Fixes: 946b960d13c1 ("USB: add driver for iowarrior devices.") Cc: stable # 2.6.21 Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman --- drivers/usb/misc/iowarrior.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/usb') diff --git a/drivers/usb/misc/iowarrior.c b/drivers/usb/misc/iowarrior.c index 77569531b78a..83b05a287b0c 100644 --- a/drivers/usb/misc/iowarrior.c +++ b/drivers/usb/misc/iowarrior.c @@ -554,7 +554,7 @@ static long iowarrior_ioctl(struct file *file, unsigned int cmd, info.revision = le16_to_cpu(dev->udev->descriptor.bcdDevice); /* 0==UNKNOWN, 1==LOW(usb1.1) ,2=FULL(usb1.1), 3=HIGH(usb2.0) */ - info.speed = le16_to_cpu(dev->udev->speed); + info.speed = dev->udev->speed; info.if_num = dev->interface->cur_altsetting->desc.bInterfaceNumber; info.report_size = dev->report_size; -- cgit v1.2.1 From 1a744d2eb76aaafb997fda004ae3ae62a1538f85 Mon Sep 17 00:00:00 2001 From: Anton Bondarenko Date: Sun, 7 May 2017 01:53:46 +0200 Subject: usb: core: fix potential memory leak in error path during hcd creation Free memory allocated for address0_mutex if allocation of bandwidth_mutex failed. Fixes: feb26ac31a2a ("usb: core: hub: hub_port_init lock controller instead of bus") Signed-off-by: Anton Bondarenko Acked-by: Alan Stern Signed-off-by: Greg Kroah-Hartman --- drivers/usb/core/hcd.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers/usb') diff --git a/drivers/usb/core/hcd.c b/drivers/usb/core/hcd.c index 5235d6be1bdf..5dea98358c05 100644 --- a/drivers/usb/core/hcd.c +++ b/drivers/usb/core/hcd.c @@ -2520,6 +2520,7 @@ struct usb_hcd *__usb_create_hcd(const struct hc_driver *driver, hcd->bandwidth_mutex = kmalloc(sizeof(*hcd->bandwidth_mutex), GFP_KERNEL); if (!hcd->bandwidth_mutex) { + kfree(hcd->address0_mutex); kfree(hcd); dev_dbg(dev, "hcd bandwidth mutex alloc failed\n"); return NULL; -- cgit v1.2.1 From dd14a3e9b92ac6f0918054f9e3477438760a4fa6 Mon Sep 17 00:00:00 2001 From: Chris Brandt Date: Thu, 27 Apr 2017 12:12:49 -0700 Subject: usb: r8a66597-hcd: decrease timeout The timeout for BULK packets was 300ms which is a long time if other endpoints or devices are waiting for their turn. Changing it to 50ms greatly increased the overall performance for multi-endpoint devices. Fixes: 5d3043586db4 ("usb: r8a66597-hcd: host controller driver for R8A6659") Signed-off-by: Chris Brandt Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/r8a66597-hcd.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/usb') diff --git a/drivers/usb/host/r8a66597-hcd.c b/drivers/usb/host/r8a66597-hcd.c index bfa7fa3d2eea..698ec8721403 100644 --- a/drivers/usb/host/r8a66597-hcd.c +++ b/drivers/usb/host/r8a66597-hcd.c @@ -1269,7 +1269,7 @@ static void set_td_timer(struct r8a66597 *r8a66597, struct r8a66597_td *td) time = 30; break; default: - time = 300; + time = 50; break; } -- cgit v1.2.1 From 1f873d857b6c2fefb4dada952674aa01bcfb92bd Mon Sep 17 00:00:00 2001 From: Chris Brandt Date: Thu, 27 Apr 2017 12:12:02 -0700 Subject: usb: r8a66597-hcd: select a different endpoint on timeout If multiple endpoints on a single device have pending IN URBs and one endpoint times out due to NAKs (perfectly legal), select a different endpoint URB to try. The existing code only checked to see another device address has pending URBs and ignores other IN endpoints on the current device address. This leads to endpoints never getting serviced if one endpoint is using NAK as a flow control method. Fixes: 5d3043586db4 ("usb: r8a66597-hcd: host controller driver for R8A6659") Signed-off-by: Chris Brandt Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/r8a66597-hcd.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) (limited to 'drivers/usb') diff --git a/drivers/usb/host/r8a66597-hcd.c b/drivers/usb/host/r8a66597-hcd.c index 698ec8721403..7bf78be1fd32 100644 --- a/drivers/usb/host/r8a66597-hcd.c +++ b/drivers/usb/host/r8a66597-hcd.c @@ -1785,6 +1785,7 @@ static void r8a66597_td_timer(unsigned long _r8a66597) pipe = td->pipe; pipe_stop(r8a66597, pipe); + /* Select a different address or endpoint */ new_td = td; do { list_move_tail(&new_td->queue, @@ -1794,7 +1795,8 @@ static void r8a66597_td_timer(unsigned long _r8a66597) new_td = td; break; } - } while (td != new_td && td->address == new_td->address); + } while (td != new_td && td->address == new_td->address && + td->pipe->info.epnum == new_td->pipe->info.epnum); start_transfer(r8a66597, new_td); -- cgit v1.2.1 From a7415477a20448bbb7d13765784c0b29249a176f Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Tue, 16 May 2017 16:26:13 +0200 Subject: USB: ehci-platform: fix companion-device leak Make sure do drop the reference taken to the companion device during resume. Fixes: d4d75128b8fd ("usb: host: ehci-platform: fix usb 1.1 device is not connected in system resume") Cc: stable # 4.11 Signed-off-by: Johan Hovold Acked-by: Yoshihiro Shimoda Acked-by: Alan Stern Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/ehci-platform.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) (limited to 'drivers/usb') diff --git a/drivers/usb/host/ehci-platform.c b/drivers/usb/host/ehci-platform.c index bc7b9be12f54..f1908ea9fbd8 100644 --- a/drivers/usb/host/ehci-platform.c +++ b/drivers/usb/host/ehci-platform.c @@ -384,8 +384,10 @@ static int ehci_platform_resume(struct device *dev) } companion_dev = usb_of_get_companion_dev(hcd->self.controller); - if (companion_dev) + if (companion_dev) { device_pm_wait_for_dev(hcd->self.controller, companion_dev); + put_device(companion_dev); + } ehci_resume(hcd, priv->reset_on_resume); return 0; -- cgit v1.2.1 From ef53b92ece675ed9778b50f4432e004683696d01 Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Tue, 16 May 2017 16:26:14 +0200 Subject: USB: core: of: document reference taken by companion helper Document that the new companion-device lookup helper takes a reference to the companion device which needs to be dropped after use. Signed-off-by: Johan Hovold Acked-by: Alan Stern Signed-off-by: Greg Kroah-Hartman --- drivers/usb/core/of.c | 3 +++ 1 file changed, 3 insertions(+) (limited to 'drivers/usb') diff --git a/drivers/usb/core/of.c b/drivers/usb/core/of.c index d787f195a9a6..d563cbcf76cf 100644 --- a/drivers/usb/core/of.c +++ b/drivers/usb/core/of.c @@ -53,6 +53,9 @@ EXPORT_SYMBOL_GPL(usb_of_get_child_node); * * Find the companion device from platform bus. * + * Takes a reference to the returned struct device which needs to be dropped + * after use. + * * Return: On success, a pointer to the companion device, %NULL on failure. */ struct device *usb_of_get_companion_dev(struct device *dev) -- cgit v1.2.1 From d81182ce30dbd497a1e7047d7fda2af040347790 Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Wed, 10 May 2017 18:18:25 +0200 Subject: USB: gadget: dummy_hcd: fix hub-descriptor removable fields Flag the first and only port as removable while also leaving the remaining bits (including the reserved bit zero) unset in accordance with the specifications: "Within a byte, if no port exists for a given location, the bit field representing the port characteristics shall be 0." Also add a comment marking the legacy PortPwrCtrlMask field. Fixes: 1cd8fd2887e1 ("usb: gadget: dummy_hcd: add SuperSpeed support") Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Cc: Tatyana Brokhman Signed-off-by: Johan Hovold Acked-by: Alan Stern Signed-off-by: Greg Kroah-Hartman --- drivers/usb/gadget/udc/dummy_hcd.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'drivers/usb') diff --git a/drivers/usb/gadget/udc/dummy_hcd.c b/drivers/usb/gadget/udc/dummy_hcd.c index c79081952ea0..ccabb51cb98d 100644 --- a/drivers/usb/gadget/udc/dummy_hcd.c +++ b/drivers/usb/gadget/udc/dummy_hcd.c @@ -2008,7 +2008,7 @@ ss_hub_descriptor(struct usb_hub_descriptor *desc) HUB_CHAR_COMMON_OCPM); desc->bNbrPorts = 1; desc->u.ss.bHubHdrDecLat = 0x04; /* Worst case: 0.4 micro sec*/ - desc->u.ss.DeviceRemovable = 0xffff; + desc->u.ss.DeviceRemovable = 0; } static inline void hub_descriptor(struct usb_hub_descriptor *desc) @@ -2020,8 +2020,8 @@ static inline void hub_descriptor(struct usb_hub_descriptor *desc) HUB_CHAR_INDV_PORT_LPSM | HUB_CHAR_COMMON_OCPM); desc->bNbrPorts = 1; - desc->u.hs.DeviceRemovable[0] = 0xff; - desc->u.hs.DeviceRemovable[1] = 0xff; + desc->u.hs.DeviceRemovable[0] = 0; + desc->u.hs.DeviceRemovable[1] = 0xff; /* PortPwrCtrlMask */ } static int dummy_hub_control( -- cgit v1.2.1 From ec963b412a54aac8e527708ecad06a6988a86fb4 Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Wed, 10 May 2017 18:18:26 +0200 Subject: USB: usbip: fix nonconforming hub descriptor Fix up the root-hub descriptor to accommodate the variable-length DeviceRemovable and PortPwrCtrlMask fields, while marking all ports as removable (and leaving the reserved bit zero unset). Also add a build-time constraint on VHCI_HC_PORTS which must never be greater than USB_MAXCHILDREN (but this was only enforced through a KConfig constant). This specifically fixes the descriptor layout whenever VHCI_HC_PORTS is greater than seven (default is 8). Fixes: 04679b3489e0 ("Staging: USB/IP: add client driver") Cc: Takahiro Hirofuchi Cc: Valentina Manea Signed-off-by: Johan Hovold Acked-by: Shuah Khan Signed-off-by: Greg Kroah-Hartman --- drivers/usb/usbip/vhci_hcd.c | 11 ++++++++--- 1 file changed, 8 insertions(+), 3 deletions(-) (limited to 'drivers/usb') diff --git a/drivers/usb/usbip/vhci_hcd.c b/drivers/usb/usbip/vhci_hcd.c index 5d8b2c261940..0585078638db 100644 --- a/drivers/usb/usbip/vhci_hcd.c +++ b/drivers/usb/usbip/vhci_hcd.c @@ -235,14 +235,19 @@ done: static inline void hub_descriptor(struct usb_hub_descriptor *desc) { + int width; + memset(desc, 0, sizeof(*desc)); desc->bDescriptorType = USB_DT_HUB; - desc->bDescLength = 9; desc->wHubCharacteristics = cpu_to_le16( HUB_CHAR_INDV_PORT_LPSM | HUB_CHAR_COMMON_OCPM); + desc->bNbrPorts = VHCI_HC_PORTS; - desc->u.hs.DeviceRemovable[0] = 0xff; - desc->u.hs.DeviceRemovable[1] = 0xff; + BUILD_BUG_ON(VHCI_HC_PORTS > USB_MAXCHILDREN); + width = desc->bNbrPorts / 8 + 1; + desc->bDescLength = USB_DT_HUB_NONVAR_SIZE + 2 * width; + memset(&desc->u.hs.DeviceRemovable[0], 0, width); + memset(&desc->u.hs.DeviceRemovable[width], 0xff, width); } static int vhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue, -- cgit v1.2.1 From 2c25a2c818023df64463aac3288a9f969491e507 Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Wed, 10 May 2017 18:18:27 +0200 Subject: USB: hub: fix SS hub-descriptor handling A SuperSpeed hub descriptor does not have any variable-length fields so bail out when reading a short descriptor. This avoids parsing and leaking two bytes of uninitialised slab data through sysfs removable-attributes. Fixes: dbe79bbe9dcb ("USB 3.0 Hub Changes") Cc: stable # 2.6.39 Cc: John Youn Acked-by: Alan Stern Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman --- drivers/usb/core/hub.c | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) (limited to 'drivers/usb') diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c index 9dca59ef18b3..3ff1e9f89f2d 100644 --- a/drivers/usb/core/hub.c +++ b/drivers/usb/core/hub.c @@ -380,8 +380,12 @@ static int get_hub_descriptor(struct usb_device *hdev, void *data) USB_REQ_GET_DESCRIPTOR, USB_DIR_IN | USB_RT_HUB, dtype << 8, 0, data, size, USB_CTRL_GET_TIMEOUT); - if (ret >= (USB_DT_HUB_NONVAR_SIZE + 2)) + if (hub_is_superspeed(hdev)) { + if (ret == size) + return ret; + } else if (ret >= (USB_DT_HUB_NONVAR_SIZE + 2)) { return ret; + } } return -EINVAL; } @@ -1321,7 +1325,7 @@ static int hub_configure(struct usb_hub *hub, /* Request the entire hub descriptor. * hub->descriptor can handle USB_MAXCHILDREN ports, - * but the hub can/will return fewer bytes here. + * but a (non-SS) hub can/will return fewer bytes here. */ ret = get_hub_descriptor(hdev, hub->descriptor); if (ret < 0) { -- cgit v1.2.1 From bec444cd1c94c48df409a35ad4e5b143c245c3f7 Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Wed, 10 May 2017 18:18:28 +0200 Subject: USB: hub: fix non-SS hub-descriptor handling Add missing sanity check on the non-SuperSpeed hub-descriptor length in order to avoid parsing and leaking two bytes of uninitialised slab data through sysfs removable-attributes (or a compound-device debug statement). Note that we only make sure that the DeviceRemovable field is always present (and specifically ignore the unused PortPwrCtrlMask field) in order to continue support any hubs with non-compliant descriptors. As a further safeguard, the descriptor buffer is also cleared. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Cc: stable # 2.6.12 Signed-off-by: Johan Hovold Acked-by: Alan Stern Signed-off-by: Greg Kroah-Hartman --- drivers/usb/core/hub.c | 13 +++++++++---- 1 file changed, 9 insertions(+), 4 deletions(-) (limited to 'drivers/usb') diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c index 3ff1e9f89f2d..f77a4ebde7d5 100644 --- a/drivers/usb/core/hub.c +++ b/drivers/usb/core/hub.c @@ -362,7 +362,8 @@ static void usb_set_lpm_parameters(struct usb_device *udev) } /* USB 2.0 spec Section 11.24.4.5 */ -static int get_hub_descriptor(struct usb_device *hdev, void *data) +static int get_hub_descriptor(struct usb_device *hdev, + struct usb_hub_descriptor *desc) { int i, ret, size; unsigned dtype; @@ -378,12 +379,16 @@ static int get_hub_descriptor(struct usb_device *hdev, void *data) for (i = 0; i < 3; i++) { ret = usb_control_msg(hdev, usb_rcvctrlpipe(hdev, 0), USB_REQ_GET_DESCRIPTOR, USB_DIR_IN | USB_RT_HUB, - dtype << 8, 0, data, size, + dtype << 8, 0, desc, size, USB_CTRL_GET_TIMEOUT); if (hub_is_superspeed(hdev)) { if (ret == size) return ret; - } else if (ret >= (USB_DT_HUB_NONVAR_SIZE + 2)) { + } else if (ret >= USB_DT_HUB_NONVAR_SIZE + 2) { + /* Make sure we have the DeviceRemovable field. */ + size = USB_DT_HUB_NONVAR_SIZE + desc->bNbrPorts / 8 + 1; + if (ret < size) + return -EMSGSIZE; return ret; } } @@ -1317,7 +1322,7 @@ static int hub_configure(struct usb_hub *hub, } mutex_init(&hub->status_mutex); - hub->descriptor = kmalloc(sizeof(*hub->descriptor), GFP_KERNEL); + hub->descriptor = kzalloc(sizeof(*hub->descriptor), GFP_KERNEL); if (!hub->descriptor) { ret = -ENOMEM; goto fail; -- cgit v1.2.1 From 93491ced3c87c94b12220dbac0527e1356702179 Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Wed, 10 May 2017 18:18:29 +0200 Subject: USB: hub: fix SS max number of ports Add define for the maximum number of ports on a SuperSpeed hub as per USB 3.1 spec Table 10-5, and use it when verifying the retrieved hub descriptor. This specifically avoids benign attempts to update the DeviceRemovable mask for non-existing ports (should we get that far). Fixes: dbe79bbe9dcb ("USB 3.0 Hub Changes") Acked-by: Alan Stern Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman --- drivers/usb/core/hub.c | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-) (limited to 'drivers/usb') diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c index f77a4ebde7d5..b8bb20d7acdb 100644 --- a/drivers/usb/core/hub.c +++ b/drivers/usb/core/hub.c @@ -1336,7 +1336,13 @@ static int hub_configure(struct usb_hub *hub, if (ret < 0) { message = "can't read hub descriptor"; goto fail; - } else if (hub->descriptor->bNbrPorts > USB_MAXCHILDREN) { + } + + maxchild = USB_MAXCHILDREN; + if (hub_is_superspeed(hdev)) + maxchild = min_t(unsigned, maxchild, USB_SS_MAXPORTS); + + if (hub->descriptor->bNbrPorts > maxchild) { message = "hub has too many ports!"; ret = -ENODEV; goto fail; -- cgit v1.2.1 From 5120a266928a07231d198bb518f6fe73148786a3 Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Wed, 10 May 2017 18:18:30 +0200 Subject: USB: host: xhci: use max-port define Use the new define for the maximum number of SuperSpeed ports instead of a constant when allocating xHCI root hubs. Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/xhci-mem.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) (limited to 'drivers/usb') diff --git a/drivers/usb/host/xhci-mem.c b/drivers/usb/host/xhci-mem.c index bbe22bcc550a..69428e970925 100644 --- a/drivers/usb/host/xhci-mem.c +++ b/drivers/usb/host/xhci-mem.c @@ -2307,10 +2307,11 @@ static int xhci_setup_port_arrays(struct xhci_hcd *xhci, gfp_t flags) /* Place limits on the number of roothub ports so that the hub * descriptors aren't longer than the USB core will allocate. */ - if (xhci->num_usb3_ports > 15) { + if (xhci->num_usb3_ports > USB_SS_MAXPORTS) { xhci_dbg_trace(xhci, trace_xhci_dbg_init, - "Limiting USB 3.0 roothub ports to 15."); - xhci->num_usb3_ports = 15; + "Limiting USB 3.0 roothub ports to %u.", + USB_SS_MAXPORTS); + xhci->num_usb3_ports = USB_SS_MAXPORTS; } if (xhci->num_usb2_ports > USB_MAXCHILDREN) { xhci_dbg_trace(xhci, trace_xhci_dbg_init, -- cgit v1.2.1 From 8d7a10dd323993cc40bd37bce8bc570133b0c396 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Bj=C3=B8rn=20Mork?= Date: Wed, 17 May 2017 16:30:50 +0200 Subject: USB: serial: qcserial: add more Lenovo EM74xx device IDs MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit In their infinite wisdom, and never ending quest for end user frustration, Lenovo has decided to use new USB device IDs for the wwan modules in their 2017 laptops. The actual hardware is still the Sierra Wireless EM7455 or EM7430, depending on region. Cc: Signed-off-by: Bjørn Mork Signed-off-by: Johan Hovold --- drivers/usb/serial/qcserial.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'drivers/usb') diff --git a/drivers/usb/serial/qcserial.c b/drivers/usb/serial/qcserial.c index 38b3f0d8cd58..fd509ed6cf70 100644 --- a/drivers/usb/serial/qcserial.c +++ b/drivers/usb/serial/qcserial.c @@ -162,6 +162,8 @@ static const struct usb_device_id id_table[] = { {DEVICE_SWI(0x1199, 0x9071)}, /* Sierra Wireless MC74xx */ {DEVICE_SWI(0x1199, 0x9078)}, /* Sierra Wireless EM74xx */ {DEVICE_SWI(0x1199, 0x9079)}, /* Sierra Wireless EM74xx */ + {DEVICE_SWI(0x1199, 0x907a)}, /* Sierra Wireless EM74xx QDL */ + {DEVICE_SWI(0x1199, 0x907b)}, /* Sierra Wireless EM74xx */ {DEVICE_SWI(0x413c, 0x81a2)}, /* Dell Wireless 5806 Gobi(TM) 4G LTE Mobile Broadband Card */ {DEVICE_SWI(0x413c, 0x81a3)}, /* Dell Wireless 5570 HSPA+ (42Mbps) Mobile Broadband Card */ {DEVICE_SWI(0x413c, 0x81a4)}, /* Dell Wireless 5570e HSPA+ (42Mbps) Mobile Broadband Card */ -- cgit v1.2.1 From 7bc5d5aff356f3ba16c4d1e9eaf95cc99b7574ab Mon Sep 17 00:00:00 2001 From: Mathias Nyman Date: Wed, 17 May 2017 18:31:59 +0300 Subject: usb: xhci: trace URB before giving it back instead of after Don't access any members of a URB after giving it back. URB might be freed by then already. Signed-off-by: Mathias Nyman Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/xhci-ring.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/usb') diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c index 74bf5c60a260..507ba7734b94 100644 --- a/drivers/usb/host/xhci-ring.c +++ b/drivers/usb/host/xhci-ring.c @@ -641,8 +641,8 @@ static void xhci_giveback_urb_in_irq(struct xhci_hcd *xhci, xhci_urb_free_priv(urb_priv); usb_hcd_unlink_urb_from_ep(hcd, urb); spin_unlock(&xhci->lock); - usb_hcd_giveback_urb(hcd, urb, status); trace_xhci_urb_giveback(urb); + usb_hcd_giveback_urb(hcd, urb, status); spin_lock(&xhci->lock); } -- cgit v1.2.1 From a0c16630d35a874e82bdf2088f58ecaca1024315 Mon Sep 17 00:00:00 2001 From: Mathias Nyman Date: Wed, 17 May 2017 18:32:00 +0300 Subject: xhci: apply PME_STUCK_QUIRK and MISSING_CAS quirk for Denverton Intel Denverton microserver is Atom based and need the PME and CAS quirks as well. Cc: stable Signed-off-by: Mathias Nyman Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/xhci-pci.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) (limited to 'drivers/usb') diff --git a/drivers/usb/host/xhci-pci.c b/drivers/usb/host/xhci-pci.c index 7b86508ac8cf..fcf1f3f63e7a 100644 --- a/drivers/usb/host/xhci-pci.c +++ b/drivers/usb/host/xhci-pci.c @@ -52,6 +52,7 @@ #define PCI_DEVICE_ID_INTEL_BROXTON_M_XHCI 0x0aa8 #define PCI_DEVICE_ID_INTEL_BROXTON_B_XHCI 0x1aa8 #define PCI_DEVICE_ID_INTEL_APL_XHCI 0x5aa8 +#define PCI_DEVICE_ID_INTEL_DNV_XHCI 0x19d0 static const char hcd_name[] = "xhci_hcd"; @@ -166,7 +167,8 @@ static void xhci_pci_quirks(struct device *dev, struct xhci_hcd *xhci) pdev->device == PCI_DEVICE_ID_INTEL_CHERRYVIEW_XHCI || pdev->device == PCI_DEVICE_ID_INTEL_BROXTON_M_XHCI || pdev->device == PCI_DEVICE_ID_INTEL_BROXTON_B_XHCI || - pdev->device == PCI_DEVICE_ID_INTEL_APL_XHCI)) { + pdev->device == PCI_DEVICE_ID_INTEL_APL_XHCI || + pdev->device == PCI_DEVICE_ID_INTEL_DNV_XHCI)) { xhci->quirks |= XHCI_PME_STUCK_QUIRK; } if (pdev->vendor == PCI_VENDOR_ID_INTEL && @@ -175,7 +177,8 @@ static void xhci_pci_quirks(struct device *dev, struct xhci_hcd *xhci) } if (pdev->vendor == PCI_VENDOR_ID_INTEL && (pdev->device == PCI_DEVICE_ID_INTEL_CHERRYVIEW_XHCI || - pdev->device == PCI_DEVICE_ID_INTEL_APL_XHCI)) + pdev->device == PCI_DEVICE_ID_INTEL_APL_XHCI || + pdev->device == PCI_DEVICE_ID_INTEL_DNV_XHCI)) xhci->quirks |= XHCI_MISSING_CAS; if (pdev->vendor == PCI_VENDOR_ID_ETRON && -- cgit v1.2.1 From 7480d912d549f414e0ce39331870899e89a5598c Mon Sep 17 00:00:00 2001 From: Peter Chen Date: Wed, 17 May 2017 18:32:01 +0300 Subject: usb: host: xhci-mem: allocate zeroed Scratchpad Buffer According to xHCI ch4.20 Scratchpad Buffers, the Scratchpad Buffer needs to be zeroed. ... The following operations take place to allocate Scratchpad Buffers to the xHC: ... b. Software clears the Scratchpad Buffer to '0' Cc: stable Signed-off-by: Peter Chen Signed-off-by: Mathias Nyman Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/xhci-mem.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/usb') diff --git a/drivers/usb/host/xhci-mem.c b/drivers/usb/host/xhci-mem.c index 69428e970925..12b573cfb846 100644 --- a/drivers/usb/host/xhci-mem.c +++ b/drivers/usb/host/xhci-mem.c @@ -1724,7 +1724,7 @@ static int scratchpad_alloc(struct xhci_hcd *xhci, gfp_t flags) xhci->dcbaa->dev_context_ptrs[0] = cpu_to_le64(xhci->scratchpad->sp_dma); for (i = 0; i < num_sp; i++) { dma_addr_t dma; - void *buf = dma_alloc_coherent(dev, xhci->page_size, &dma, + void *buf = dma_zalloc_coherent(dev, xhci->page_size, &dma, flags); if (!buf) goto fail_sp4; -- cgit v1.2.1 From 6a29beef9d1b16c762e469d77e28c3de3f5c3dbb Mon Sep 17 00:00:00 2001 From: Peter Chen Date: Wed, 17 May 2017 18:32:02 +0300 Subject: usb: host: xhci-ring: don't need to clear interrupt pending for MSI enabled hcd According to xHCI spec Figure 30: Interrupt Throttle Flow Diagram If PCI Message Signaled Interrupts (MSI or MSI-X) are enabled, then the assertion of the Interrupt Pending (IP) flag in Figure 30 generates a PCI Dword write. The IP flag is automatically cleared by the completion of the PCI write. the MSI enabled HCs don't need to clear interrupt pending bit, but hcd->irq = 0 doesn't equal to MSI enabled HCD. At some Dual-role controller software designs, it sets hcd->irq as 0 to avoid HCD requesting interrupt, and they want to decide when to call usb_hcd_irq by software. Signed-off-by: Peter Chen Signed-off-by: Mathias Nyman Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/xhci-ring.c | 5 +---- drivers/usb/host/xhci.c | 5 +++-- 2 files changed, 4 insertions(+), 6 deletions(-) (limited to 'drivers/usb') diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c index 507ba7734b94..0830b25f9499 100644 --- a/drivers/usb/host/xhci-ring.c +++ b/drivers/usb/host/xhci-ring.c @@ -2707,12 +2707,9 @@ irqreturn_t xhci_irq(struct usb_hcd *hcd) */ status |= STS_EINT; writel(status, &xhci->op_regs->status); - /* FIXME when MSI-X is supported and there are multiple vectors */ - /* Clear the MSI-X event interrupt status */ - if (hcd->irq) { + if (!hcd->msi_enabled) { u32 irq_pending; - /* Acknowledge the PCI interrupt */ irq_pending = readl(&xhci->ir_set->irq_pending); irq_pending |= IMAN_IP; writel(irq_pending, &xhci->ir_set->irq_pending); diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c index 2d1310220832..71eb2991c698 100644 --- a/drivers/usb/host/xhci.c +++ b/drivers/usb/host/xhci.c @@ -359,9 +359,10 @@ static int xhci_try_enable_msi(struct usb_hcd *hcd) /* fall back to msi*/ ret = xhci_setup_msi(xhci); - if (!ret) - /* hcd->irq is 0, we have MSI */ + if (!ret) { + hcd->msi_enabled = 1; return 0; + } if (!pdev->irq) { xhci_err(xhci, "No msi-x/msi found and no IRQ in BIOS\n"); -- cgit v1.2.1 From 63aea0dbab90a2461faaae357cbc8cfd6c8de9fe Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Wed, 17 May 2017 18:32:03 +0300 Subject: USB: xhci: fix lock-inversion problem With threaded interrupts, bottom-half handlers are called with interrupts enabled. Therefore they can't safely use spin_lock(); they have to use spin_lock_irqsave(). Lockdep warns about a violation occurring in xhci_irq(): ========================================================= [ INFO: possible irq lock inversion dependency detected ] 4.11.0-rc8-dbg+ #1 Not tainted --------------------------------------------------------- swapper/7/0 just changed the state of lock: (&(&ehci->lock)->rlock){-.-...}, at: [] ehci_hrtimer_func+0x29/0xc0 [ehci_hcd] but this lock took another, HARDIRQ-unsafe lock in the past: (hcd_urb_list_lock){+.....} and interrupts could create inverse lock ordering between them. other info that might help us debug this: Possible interrupt unsafe locking scenario: CPU0 CPU1 ---- ---- lock(hcd_urb_list_lock); local_irq_disable(); lock(&(&ehci->lock)->rlock); lock(hcd_urb_list_lock); lock(&(&ehci->lock)->rlock); *** DEADLOCK *** no locks held by swapper/7/0. the shortest dependencies between 2nd lock and 1st lock: -> (hcd_urb_list_lock){+.....} ops: 252 { HARDIRQ-ON-W at: __lock_acquire+0x602/0x1280 lock_acquire+0xd5/0x1c0 _raw_spin_lock+0x2f/0x40 usb_hcd_unlink_urb_from_ep+0x1b/0x60 [usbcore] xhci_giveback_urb_in_irq.isra.45+0x70/0x1b0 [xhci_hcd] finish_td.constprop.60+0x1d8/0x2e0 [xhci_hcd] xhci_irq+0xdd6/0x1fa0 [xhci_hcd] usb_hcd_irq+0x26/0x40 [usbcore] irq_forced_thread_fn+0x2f/0x70 irq_thread+0x149/0x1d0 kthread+0x113/0x150 ret_from_fork+0x2e/0x40 This patch fixes the problem. Signed-off-by: Alan Stern Reported-and-tested-by: Bart Van Assche CC: Signed-off-by: Mathias Nyman Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/xhci-ring.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) (limited to 'drivers/usb') diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c index 0830b25f9499..6d2492c1c643 100644 --- a/drivers/usb/host/xhci-ring.c +++ b/drivers/usb/host/xhci-ring.c @@ -2677,11 +2677,12 @@ irqreturn_t xhci_irq(struct usb_hcd *hcd) struct xhci_hcd *xhci = hcd_to_xhci(hcd); union xhci_trb *event_ring_deq; irqreturn_t ret = IRQ_NONE; + unsigned long flags; dma_addr_t deq; u64 temp_64; u32 status; - spin_lock(&xhci->lock); + spin_lock_irqsave(&xhci->lock, flags); /* Check if the xHC generated the interrupt, or the irq is shared */ status = readl(&xhci->op_regs->status); if (status == ~(u32)0) { @@ -2754,7 +2755,7 @@ irqreturn_t xhci_irq(struct usb_hcd *hcd) ret = IRQ_HANDLED; out: - spin_unlock(&xhci->lock); + spin_unlock_irqrestore(&xhci->lock, flags); return ret; } -- cgit v1.2.1 From 5db851cf20857c5504b146046e97cb7781f2a743 Mon Sep 17 00:00:00 2001 From: Matthias Lange Date: Wed, 17 May 2017 18:32:04 +0300 Subject: xhci: remove GFP_DMA flag from allocation There is no reason to restrict allocations to the first 16MB ISA DMA addresses. It is causing problems in a virtualization setup with enabled IOMMU (x86_64). The result is that USB is not working in the VM. CC: Signed-off-by: Matthias Lange Signed-off-by: Mathias Nyman Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/xhci-mem.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/usb') diff --git a/drivers/usb/host/xhci-mem.c b/drivers/usb/host/xhci-mem.c index 12b573cfb846..1f1687e888d6 100644 --- a/drivers/usb/host/xhci-mem.c +++ b/drivers/usb/host/xhci-mem.c @@ -56,7 +56,7 @@ static struct xhci_segment *xhci_segment_alloc(struct xhci_hcd *xhci, } if (max_packet) { - seg->bounce_buf = kzalloc(max_packet, flags | GFP_DMA); + seg->bounce_buf = kzalloc(max_packet, flags); if (!seg->bounce_buf) { dma_pool_free(xhci->segment_pool, seg->trbs, dma); kfree(seg); -- cgit v1.2.1 From 604d02a2a66ab7f93fd3b2bde3698c29ef057b65 Mon Sep 17 00:00:00 2001 From: Mathias Nyman Date: Wed, 17 May 2017 18:32:05 +0300 Subject: xhci: Fix command ring stop regression in 4.11 In 4.11 TRB completion codes were renamed to match spec. Completion codes for command ring stopped and endpoint stopped were mixed, leading to failures while handling a stopped command ring. Use the correct completion code for command ring stopped events. Fixes: 0b7c105a04ca ("usb: host: xhci: rename completion codes to match spec") Cc: # 4.11 Signed-off-by: Mathias Nyman Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/xhci-hub.c | 2 +- drivers/usb/host/xhci-ring.c | 8 ++++---- drivers/usb/host/xhci.c | 8 ++++---- 3 files changed, 9 insertions(+), 9 deletions(-) (limited to 'drivers/usb') diff --git a/drivers/usb/host/xhci-hub.c b/drivers/usb/host/xhci-hub.c index 5e3e9d4c6956..0dde49c35dd2 100644 --- a/drivers/usb/host/xhci-hub.c +++ b/drivers/usb/host/xhci-hub.c @@ -419,7 +419,7 @@ static int xhci_stop_device(struct xhci_hcd *xhci, int slot_id, int suspend) wait_for_completion(cmd->completion); if (cmd->status == COMP_COMMAND_ABORTED || - cmd->status == COMP_STOPPED) { + cmd->status == COMP_COMMAND_RING_STOPPED) { xhci_warn(xhci, "Timeout while waiting for stop endpoint command\n"); ret = -ETIME; } diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c index 6d2492c1c643..03f63f50afb6 100644 --- a/drivers/usb/host/xhci-ring.c +++ b/drivers/usb/host/xhci-ring.c @@ -323,7 +323,7 @@ static void xhci_handle_stopped_cmd_ring(struct xhci_hcd *xhci, if (i_cmd->status != COMP_COMMAND_ABORTED) continue; - i_cmd->status = COMP_STOPPED; + i_cmd->status = COMP_COMMAND_RING_STOPPED; xhci_dbg(xhci, "Turn aborted command %p to no-op\n", i_cmd->command_trb); @@ -1380,7 +1380,7 @@ static void handle_cmd_completion(struct xhci_hcd *xhci, cmd_comp_code = GET_COMP_CODE(le32_to_cpu(event->status)); /* If CMD ring stopped we own the trbs between enqueue and dequeue */ - if (cmd_comp_code == COMP_STOPPED) { + if (cmd_comp_code == COMP_COMMAND_RING_STOPPED) { complete_all(&xhci->cmd_ring_stop_completion); return; } @@ -1436,8 +1436,8 @@ static void handle_cmd_completion(struct xhci_hcd *xhci, break; case TRB_CMD_NOOP: /* Is this an aborted command turned to NO-OP? */ - if (cmd->status == COMP_STOPPED) - cmd_comp_code = COMP_STOPPED; + if (cmd->status == COMP_COMMAND_RING_STOPPED) + cmd_comp_code = COMP_COMMAND_RING_STOPPED; break; case TRB_RESET_EP: WARN_ON(slot_id != TRB_TO_SLOT_ID( diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c index 71eb2991c698..30f47d92a610 100644 --- a/drivers/usb/host/xhci.c +++ b/drivers/usb/host/xhci.c @@ -1764,7 +1764,7 @@ static int xhci_configure_endpoint_result(struct xhci_hcd *xhci, switch (*cmd_status) { case COMP_COMMAND_ABORTED: - case COMP_STOPPED: + case COMP_COMMAND_RING_STOPPED: xhci_warn(xhci, "Timeout while waiting for configure endpoint command\n"); ret = -ETIME; break; @@ -1814,7 +1814,7 @@ static int xhci_evaluate_context_result(struct xhci_hcd *xhci, switch (*cmd_status) { case COMP_COMMAND_ABORTED: - case COMP_STOPPED: + case COMP_COMMAND_RING_STOPPED: xhci_warn(xhci, "Timeout while waiting for evaluate context command\n"); ret = -ETIME; break; @@ -3433,7 +3433,7 @@ static int xhci_discover_or_reset_device(struct usb_hcd *hcd, ret = reset_device_cmd->status; switch (ret) { case COMP_COMMAND_ABORTED: - case COMP_STOPPED: + case COMP_COMMAND_RING_STOPPED: xhci_warn(xhci, "Timeout waiting for reset device command\n"); ret = -ETIME; goto command_cleanup; @@ -3818,7 +3818,7 @@ static int xhci_setup_device(struct usb_hcd *hcd, struct usb_device *udev, */ switch (command->status) { case COMP_COMMAND_ABORTED: - case COMP_STOPPED: + case COMP_COMMAND_RING_STOPPED: xhci_warn(xhci, "Timeout while waiting for setup device command\n"); ret = -ETIME; break; -- cgit v1.2.1 From 4b148d5144d64ee135b8924350cb0b3a7fd21150 Mon Sep 17 00:00:00 2001 From: Thomas Petazzoni Date: Wed, 17 May 2017 18:32:06 +0300 Subject: usb: host: xhci-plat: propagate return value of platform_get_irq() platform_get_irq() returns an error code, but the xhci-plat driver ignores it and always returns -ENODEV. This is not correct, and prevents -EPROBE_DEFER from being propagated properly. CC: Signed-off-by: Thomas Petazzoni Signed-off-by: Mathias Nyman Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/xhci-plat.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/usb') diff --git a/drivers/usb/host/xhci-plat.c b/drivers/usb/host/xhci-plat.c index 7c2a9e7c8e0f..c04144b25a67 100644 --- a/drivers/usb/host/xhci-plat.c +++ b/drivers/usb/host/xhci-plat.c @@ -177,7 +177,7 @@ static int xhci_plat_probe(struct platform_device *pdev) irq = platform_get_irq(pdev, 0); if (irq < 0) - return -ENODEV; + return irq; /* * sysdev must point to a device that is known to the system firmware -- cgit v1.2.1 From 3c50ffef25855a9d9e4b07b02d756a8cdd653069 Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Wed, 17 May 2017 11:23:10 -0500 Subject: usb: musb: Fix trying to suspend while active for OTG configurations Commit d8e5f0eca1e8 ("usb: musb: Fix hardirq-safe hardirq-unsafe lock order error") caused a regression where musb keeps trying to enable host mode with no cable connected. This seems to be caused by the fact that now phy is enabled earlier, and we are wrongly trying to force USB host mode on an OTG port. The errors we are getting are "trying to suspend as a_idle while active". For ports configured as OTG, we should not need to do anything to try to force USB host mode on it's OTG port. Trying to force host mode in this case just seems to completely confuse the musb state machine. Let's fix the issue by making musb_host_setup() attempt to force the mode only if port_mode is configured for host mode. Fixes: d8e5f0eca1e8 ("usb: musb: Fix hardirq-safe hardirq-unsafe lock order error") Cc: Johan Hovold Cc: stable Reported-by: Laurent Pinchart Reported-by: Peter Ujfalusi Tested-by: Peter Ujfalusi Signed-off-by: Tony Lindgren Signed-off-by: Bin Liu Signed-off-by: Greg Kroah-Hartman --- drivers/usb/musb/musb_host.c | 9 +++++---- 1 file changed, 5 insertions(+), 4 deletions(-) (limited to 'drivers/usb') diff --git a/drivers/usb/musb/musb_host.c b/drivers/usb/musb/musb_host.c index ac3a4952abb4..dbe617a735d8 100644 --- a/drivers/usb/musb/musb_host.c +++ b/drivers/usb/musb/musb_host.c @@ -2780,10 +2780,11 @@ int musb_host_setup(struct musb *musb, int power_budget) int ret; struct usb_hcd *hcd = musb->hcd; - MUSB_HST_MODE(musb); - musb->xceiv->otg->default_a = 1; - musb->xceiv->otg->state = OTG_STATE_A_IDLE; - + if (musb->port_mode == MUSB_PORT_MODE_HOST) { + MUSB_HST_MODE(musb); + musb->xceiv->otg->default_a = 1; + musb->xceiv->otg->state = OTG_STATE_A_IDLE; + } otg_set_host(musb->xceiv->otg, &hcd->self); hcd->self.otg_port = 1; musb->xceiv->otg->host = &hcd->self; -- cgit v1.2.1 From 6df2b42f7c040d57d9ecb67244e04e905ab87ac6 Mon Sep 17 00:00:00 2001 From: Peter Ujfalusi Date: Wed, 17 May 2017 11:23:11 -0500 Subject: usb: musb: tusb6010_omap: Do not reset the other direction's packet size We have one register for each EP to set the maximum packet size for both TX and RX. If for example an RX programming would happen before the previous TX transfer finishes we would reset the TX packet side. To fix this issue, only modify the TX or RX part of the register. Fixes: 550a7375fe72 ("USB: Add MUSB and TUSB support") Signed-off-by: Peter Ujfalusi Tested-by: Tony Lindgren Signed-off-by: Bin Liu Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/usb/musb/tusb6010_omap.c | 13 +++++++++---- 1 file changed, 9 insertions(+), 4 deletions(-) (limited to 'drivers/usb') diff --git a/drivers/usb/musb/tusb6010_omap.c b/drivers/usb/musb/tusb6010_omap.c index 8b43c4b99f04..7870b37e0ea5 100644 --- a/drivers/usb/musb/tusb6010_omap.c +++ b/drivers/usb/musb/tusb6010_omap.c @@ -219,6 +219,7 @@ static int tusb_omap_dma_program(struct dma_channel *channel, u16 packet_sz, u32 dma_remaining; int src_burst, dst_burst; u16 csr; + u32 psize; int ch; s8 dmareq; s8 sync_dev; @@ -390,15 +391,19 @@ static int tusb_omap_dma_program(struct dma_channel *channel, u16 packet_sz, if (chdat->tx) { /* Send transfer_packet_sz packets at a time */ - musb_writel(ep_conf, TUSB_EP_MAX_PACKET_SIZE_OFFSET, - chdat->transfer_packet_sz); + psize = musb_readl(ep_conf, TUSB_EP_MAX_PACKET_SIZE_OFFSET); + psize &= ~0x7ff; + psize |= chdat->transfer_packet_sz; + musb_writel(ep_conf, TUSB_EP_MAX_PACKET_SIZE_OFFSET, psize); musb_writel(ep_conf, TUSB_EP_TX_OFFSET, TUSB_EP_CONFIG_XFR_SIZE(chdat->transfer_len)); } else { /* Receive transfer_packet_sz packets at a time */ - musb_writel(ep_conf, TUSB_EP_MAX_PACKET_SIZE_OFFSET, - chdat->transfer_packet_sz << 16); + psize = musb_readl(ep_conf, TUSB_EP_MAX_PACKET_SIZE_OFFSET); + psize &= ~(0x7ff << 16); + psize |= (chdat->transfer_packet_sz << 16); + musb_writel(ep_conf, TUSB_EP_MAX_PACKET_SIZE_OFFSET, psize); musb_writel(ep_conf, TUSB_EP_RX_OFFSET, TUSB_EP_CONFIG_XFR_SIZE(chdat->transfer_len)); -- cgit v1.2.1