From aa2f80e752c75e593b3820f42c416ed9458fa73e Mon Sep 17 00:00:00 2001 From: Marek Szyprowski Date: Thu, 10 May 2018 08:41:13 +0200 Subject: serial: samsung: fix maxburst parameter for DMA transactions The best granularity of residue that DMA engine can report is in the BURST units, so the serial driver must use MAXBURST = 1 and DMA_SLAVE_BUSWIDTH_1_BYTE if it relies on exact number of bytes transferred by DMA engine. Fixes: 62c37eedb74c ("serial: samsung: add dma reqest/release functions") Signed-off-by: Marek Szyprowski Acked-by: Krzysztof Kozlowski Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/samsung.c | 7 ++----- 1 file changed, 2 insertions(+), 5 deletions(-) (limited to 'drivers/tty/serial') diff --git a/drivers/tty/serial/samsung.c b/drivers/tty/serial/samsung.c index 3f2f8c118ce0..64e96926f1ad 100644 --- a/drivers/tty/serial/samsung.c +++ b/drivers/tty/serial/samsung.c @@ -862,15 +862,12 @@ static int s3c24xx_serial_request_dma(struct s3c24xx_uart_port *p) dma->rx_conf.direction = DMA_DEV_TO_MEM; dma->rx_conf.src_addr_width = DMA_SLAVE_BUSWIDTH_1_BYTE; dma->rx_conf.src_addr = p->port.mapbase + S3C2410_URXH; - dma->rx_conf.src_maxburst = 16; + dma->rx_conf.src_maxburst = 1; dma->tx_conf.direction = DMA_MEM_TO_DEV; dma->tx_conf.dst_addr_width = DMA_SLAVE_BUSWIDTH_1_BYTE; dma->tx_conf.dst_addr = p->port.mapbase + S3C2410_UTXH; - if (dma_get_cache_alignment() >= 16) - dma->tx_conf.dst_maxburst = 16; - else - dma->tx_conf.dst_maxburst = 1; + dma->tx_conf.dst_maxburst = 1; dma->rx_chan = dma_request_chan(p->port.dev, "rx"); -- cgit v1.2.1