From c6a33e2464edd87f8c12cc2d11369a5b44c65b77 Mon Sep 17 00:00:00 2001 From: Albert Lee Date: Wed, 12 Oct 2005 15:12:26 +0800 Subject: [PATCH] libata CHS: LBA28/LBA48 optimization (revise #6) - add lba_28_ok() and lba_48_ok() to ata.h. - check ending block number instead of staring block number. - use lba_28_ok() for CHS range check - LBA28/LBA48 optimization Suggested by Mark Lord and Alan Cox. Signed-off-by: Albert Lee ===== Signed-off-by: Jeff Garzik --- drivers/scsi/libata-scsi.c | 48 ++++++++++++++++++++-------------------------- 1 file changed, 21 insertions(+), 27 deletions(-) (limited to 'drivers/scsi') diff --git a/drivers/scsi/libata-scsi.c b/drivers/scsi/libata-scsi.c index 90bf22204668..efbe6fe65442 100644 --- a/drivers/scsi/libata-scsi.c +++ b/drivers/scsi/libata-scsi.c @@ -636,9 +636,13 @@ static unsigned int ata_scsi_verify_xlat(struct ata_queued_cmd *qc, u8 *scsicmd) if (dev->flags & ATA_DFLAG_LBA) { tf->flags |= ATA_TFLAG_LBA; - if (dev->flags & ATA_DFLAG_LBA48) { - if (n_block > (64 * 1024)) - goto invalid_fld; + if (lba_28_ok(block, n_block)) { + /* use LBA28 */ + tf->command = ATA_CMD_VERIFY; + tf->device |= (block >> 24) & 0xf; + } else if (lba_48_ok(block, n_block)) { + if (!(dev->flags & ATA_DFLAG_LBA48)) + goto out_of_range; /* use LBA48 */ tf->flags |= ATA_TFLAG_LBA48; @@ -649,15 +653,9 @@ static unsigned int ata_scsi_verify_xlat(struct ata_queued_cmd *qc, u8 *scsicmd) tf->hob_lbah = (block >> 40) & 0xff; tf->hob_lbam = (block >> 32) & 0xff; tf->hob_lbal = (block >> 24) & 0xff; - } else { - if (n_block > 256) - goto invalid_fld; - - /* use LBA28 */ - tf->command = ATA_CMD_VERIFY; - - tf->device |= (block >> 24) & 0xf; - } + } else + /* request too large even for LBA48 */ + goto out_of_range; tf->nsect = n_block & 0xff; @@ -670,8 +668,8 @@ static unsigned int ata_scsi_verify_xlat(struct ata_queued_cmd *qc, u8 *scsicmd) /* CHS */ u32 sect, head, cyl, track; - if (n_block > 256) - goto invalid_fld; + if (!lba_28_ok(block, n_block)) + goto out_of_range; /* Convert LBA to CHS */ track = (u32)block / dev->sectors; @@ -784,9 +782,11 @@ static unsigned int ata_scsi_rw_xlat(struct ata_queued_cmd *qc, u8 *scsicmd) if (dev->flags & ATA_DFLAG_LBA) { tf->flags |= ATA_TFLAG_LBA; - if (dev->flags & ATA_DFLAG_LBA48) { - /* The request -may- be too large for LBA48. */ - if ((block >> 48) || (n_block > 65536)) + if (lba_28_ok(block, n_block)) { + /* use LBA28 */ + tf->device |= (block >> 24) & 0xf; + } else if (lba_48_ok(block, n_block)) { + if (!(dev->flags & ATA_DFLAG_LBA48)) goto out_of_range; /* use LBA48 */ @@ -797,15 +797,9 @@ static unsigned int ata_scsi_rw_xlat(struct ata_queued_cmd *qc, u8 *scsicmd) tf->hob_lbah = (block >> 40) & 0xff; tf->hob_lbam = (block >> 32) & 0xff; tf->hob_lbal = (block >> 24) & 0xff; - } else { - /* use LBA28 */ - - /* The request -may- be too large for LBA28. */ - if ((block >> 28) || (n_block > 256)) - goto out_of_range; - - tf->device |= (block >> 24) & 0xf; - } + } else + /* request too large even for LBA48 */ + goto out_of_range; ata_rwcmd_protocol(qc); @@ -822,7 +816,7 @@ static unsigned int ata_scsi_rw_xlat(struct ata_queued_cmd *qc, u8 *scsicmd) u32 sect, head, cyl, track; /* The request -may- be too large for CHS addressing. */ - if ((block >> 28) || (n_block > 256)) + if (!lba_28_ok(block, n_block)) goto out_of_range; ata_rwcmd_protocol(qc); -- cgit v1.2.1 From 3be680b7329e65b9165d6d8dc81baa1e9e89dfc7 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Mon, 19 Dec 2005 22:35:02 +0900 Subject: [PATCH] libata: separate out ata_sata_print_link_status Separate out sata_print_link_status() from __sata_phy_reset(). Signed-off-by: Tejun Heo Signed-off-by: Jeff Garzik --- drivers/scsi/libata-core.c | 58 ++++++++++++++++++++++++++++++++-------------- 1 file changed, 40 insertions(+), 18 deletions(-) (limited to 'drivers/scsi') diff --git a/drivers/scsi/libata-core.c b/drivers/scsi/libata-core.c index 46c4cdbaee86..a07bd35da912 100644 --- a/drivers/scsi/libata-core.c +++ b/drivers/scsi/libata-core.c @@ -1525,6 +1525,41 @@ void ata_port_probe(struct ata_port *ap) ap->flags &= ~ATA_FLAG_PORT_DISABLED; } +/** + * sata_print_link_status - Print SATA link status + * @ap: SATA port to printk link status about + * + * This function prints link speed and status of a SATA link. + * + * LOCKING: + * None. + */ +static void sata_print_link_status(struct ata_port *ap) +{ + u32 sstatus, tmp; + const char *speed; + + if (!ap->ops->scr_read) + return; + + sstatus = scr_read(ap, SCR_STATUS); + + if (sata_dev_present(ap)) { + tmp = (sstatus >> 4) & 0xf; + if (tmp & (1 << 0)) + speed = "1.5"; + else if (tmp & (1 << 1)) + speed = "3.0"; + else + speed = ""; + printk(KERN_INFO "ata%u: SATA link up %s Gbps (SStatus %X)\n", + ap->id, speed, sstatus); + } else { + printk(KERN_INFO "ata%u: SATA link down (SStatus %X)\n", + ap->id, sstatus); + } +} + /** * __sata_phy_reset - Wake/reset a low-level SATA PHY * @ap: SATA port associated with target SATA PHY. @@ -1559,27 +1594,14 @@ void __sata_phy_reset(struct ata_port *ap) break; } while (time_before(jiffies, timeout)); - /* TODO: phy layer with polling, timeouts, etc. */ - sstatus = scr_read(ap, SCR_STATUS); - if (sata_dev_present(ap)) { - const char *speed; - u32 tmp; + /* print link status */ + sata_print_link_status(ap); - tmp = (sstatus >> 4) & 0xf; - if (tmp & (1 << 0)) - speed = "1.5"; - else if (tmp & (1 << 1)) - speed = "3.0"; - else - speed = ""; - printk(KERN_INFO "ata%u: SATA link up %s Gbps (SStatus %X)\n", - ap->id, speed, sstatus); + /* TODO: phy layer with polling, timeouts, etc. */ + if (sata_dev_present(ap)) ata_port_probe(ap); - } else { - printk(KERN_INFO "ata%u: SATA link down (SStatus %X)\n", - ap->id, sstatus); + else ata_port_disable(ap); - } if (ap->flags & ATA_FLAG_PORT_DISABLED) return; -- cgit v1.2.1 From 7c76d1e83961a4e355c3ebd53191bc6072c238bd Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Mon, 19 Dec 2005 22:36:34 +0900 Subject: [PATCH] ahci: separate out ahci_stop/start_engine Separate out ahci_stop/start_engine(). Signed-off-by: Tejun Heo Signed-off-by: Jeff Garzik --- drivers/scsi/ahci.c | 58 +++++++++++++++++++++++++++++++++++------------------ 1 file changed, 39 insertions(+), 19 deletions(-) (limited to 'drivers/scsi') diff --git a/drivers/scsi/ahci.c b/drivers/scsi/ahci.c index 19bd346951dd..f3dfdab173f2 100644 --- a/drivers/scsi/ahci.c +++ b/drivers/scsi/ahci.c @@ -446,6 +446,43 @@ static void ahci_scr_write (struct ata_port *ap, unsigned int sc_reg_in, writel(val, (void __iomem *) ap->ioaddr.scr_addr + (sc_reg * 4)); } +static int ahci_stop_engine(struct ata_port *ap) +{ + void __iomem *mmio = ap->host_set->mmio_base; + void __iomem *port_mmio = ahci_port_base(mmio, ap->port_no); + int work; + u32 tmp; + + tmp = readl(port_mmio + PORT_CMD); + tmp &= ~PORT_CMD_START; + writel(tmp, port_mmio + PORT_CMD); + + /* wait for engine to stop. TODO: this could be + * as long as 500 msec + */ + work = 1000; + while (work-- > 0) { + tmp = readl(port_mmio + PORT_CMD); + if ((tmp & PORT_CMD_LIST_ON) == 0) + return 0; + udelay(10); + } + + return -EIO; +} + +static void ahci_start_engine(struct ata_port *ap) +{ + void __iomem *mmio = ap->host_set->mmio_base; + void __iomem *port_mmio = ahci_port_base(mmio, ap->port_no); + u32 tmp; + + tmp = readl(port_mmio + PORT_CMD); + tmp |= PORT_CMD_START; + writel(tmp, port_mmio + PORT_CMD); + readl(port_mmio + PORT_CMD); /* flush */ +} + static void ahci_phy_reset(struct ata_port *ap) { void __iomem *port_mmio = (void __iomem *) ap->ioaddr.cmd_addr; @@ -572,7 +609,6 @@ static void ahci_restart_port(struct ata_port *ap, u32 irq_stat) void __iomem *mmio = ap->host_set->mmio_base; void __iomem *port_mmio = ahci_port_base(mmio, ap->port_no); u32 tmp; - int work; if ((ap->device[0].class != ATA_DEV_ATAPI) || ((irq_stat & PORT_IRQ_TF_ERR) == 0)) @@ -588,20 +624,7 @@ static void ahci_restart_port(struct ata_port *ap, u32 irq_stat) readl(port_mmio + PORT_SCR_ERR)); /* stop DMA */ - tmp = readl(port_mmio + PORT_CMD); - tmp &= ~PORT_CMD_START; - writel(tmp, port_mmio + PORT_CMD); - - /* wait for engine to stop. TODO: this could be - * as long as 500 msec - */ - work = 1000; - while (work-- > 0) { - tmp = readl(port_mmio + PORT_CMD); - if ((tmp & PORT_CMD_LIST_ON) == 0) - break; - udelay(10); - } + ahci_stop_engine(ap); /* clear SATA phy error, if any */ tmp = readl(port_mmio + PORT_SCR_ERR); @@ -620,10 +643,7 @@ static void ahci_restart_port(struct ata_port *ap, u32 irq_stat) } /* re-start DMA */ - tmp = readl(port_mmio + PORT_CMD); - tmp |= PORT_CMD_START; - writel(tmp, port_mmio + PORT_CMD); - readl(port_mmio + PORT_CMD); /* flush */ + ahci_start_engine(ap); } static void ahci_eng_timeout(struct ata_port *ap) -- cgit v1.2.1 From 422b75956cd11f9d9214e6e2a99d6e52d98812d4 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Mon, 19 Dec 2005 22:37:17 +0900 Subject: [PATCH] ahci: separate out ahci_dev_classify Separate out ahci_dev_classify(). Signed-off-by: Tejun Heo Signed-off-by: Jeff Garzik --- drivers/scsi/ahci.c | 24 ++++++++++++++++-------- 1 file changed, 16 insertions(+), 8 deletions(-) (limited to 'drivers/scsi') diff --git a/drivers/scsi/ahci.c b/drivers/scsi/ahci.c index f3dfdab173f2..30676b0eb366 100644 --- a/drivers/scsi/ahci.c +++ b/drivers/scsi/ahci.c @@ -483,10 +483,24 @@ static void ahci_start_engine(struct ata_port *ap) readl(port_mmio + PORT_CMD); /* flush */ } -static void ahci_phy_reset(struct ata_port *ap) +static unsigned int ahci_dev_classify(struct ata_port *ap) { void __iomem *port_mmio = (void __iomem *) ap->ioaddr.cmd_addr; struct ata_taskfile tf; + u32 tmp; + + tmp = readl(port_mmio + PORT_SIG); + tf.lbah = (tmp >> 24) & 0xff; + tf.lbam = (tmp >> 16) & 0xff; + tf.lbal = (tmp >> 8) & 0xff; + tf.nsect = (tmp) & 0xff; + + return ata_dev_classify(&tf); +} + +static void ahci_phy_reset(struct ata_port *ap) +{ + void __iomem *port_mmio = (void __iomem *) ap->ioaddr.cmd_addr; struct ata_device *dev = &ap->device[0]; u32 new_tmp, tmp; @@ -495,13 +509,7 @@ static void ahci_phy_reset(struct ata_port *ap) if (ap->flags & ATA_FLAG_PORT_DISABLED) return; - tmp = readl(port_mmio + PORT_SIG); - tf.lbah = (tmp >> 24) & 0xff; - tf.lbam = (tmp >> 16) & 0xff; - tf.lbal = (tmp >> 8) & 0xff; - tf.nsect = (tmp) & 0xff; - - dev->class = ata_dev_classify(&tf); + dev->class = ahci_dev_classify(ap); if (!ata_dev_present(dev)) { ata_port_disable(ap); return; -- cgit v1.2.1 From ff0fc1467f8189c8e2340b91161c97138a75e484 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Sun, 18 Dec 2005 17:17:07 +0900 Subject: [PATCH] ata_piix: fix MAP VALUE interpretation for for ICH6/7 Unlike their older siblings, ICH6 and 7 use different scheme for MAP VALUE. This patch makes ata_piix interpret MV properly on ICH6/7. Pre-ICH6/7 The value of these bits indicate the address range the SATA port responds to, and whether or not the SATA and IDE functions are combined. 000 = Non-combined. P0 is primary master. P1 is secondary master. 001 = Non-combined. P0 is secondary master. P1 is primary master. 100 = Combined. P0 is primary master. P1 is primary slave. P-ATA is 2:0 Map Value secondary. 101 = Combined. P0 is primary slave. P1 is primary master. P-ATA is secondary. 110 = Combined. P-ATA is primary. P0 is secondary master. P1 is secondary slave. 111 = Combined. P-ATA is primary. P0 is secondary slave. P1 is secondary master. ICH6/7 Map Value - R/W. Map Value (MV): The value in the bits below indicate the address range the SATA ports responds to, and whether or not the PATA and SATA functions are combined. When in combined mode, the AHCI memory space is not available and AHCI may not be used. 00 = Non-combined. P0 is primary master, P2 is the primary slave. P1 is secondary master, P3 is the 1:0 secondary slave (desktop only). P0 is primary master, P2 is the primary slave (mobile only). 01 = Combined. IDE is primary. P1 is secondary master, P3 is the secondary slave. (desktop only) 10 = Combined. P0 is primary master. P2 is primary slave. IDE is secondary 11 = Reserved Signed-off-by: Tejun Heo -- Jeff, without this patch, ata_piix misdetects my ICH7's combined mode, ending up not applying bridge limits to PX-710SA and configuring IDE drive on 40-c cable to UDMA/66. Thanks. Signed-off-by: Jeff Garzik --- drivers/scsi/ata_piix.c | 53 ++++++++++++++++++++++++++++++++++++------------- 1 file changed, 39 insertions(+), 14 deletions(-) (limited to 'drivers/scsi') diff --git a/drivers/scsi/ata_piix.c b/drivers/scsi/ata_piix.c index fc3ca051ceed..19d8d4ba6a1e 100644 --- a/drivers/scsi/ata_piix.c +++ b/drivers/scsi/ata_piix.c @@ -101,9 +101,11 @@ enum { ICH5_PCS = 0x92, /* port control and status */ PIIX_SCC = 0x0A, /* sub-class code register */ - PIIX_FLAG_AHCI = (1 << 28), /* AHCI possible */ - PIIX_FLAG_CHECKINTR = (1 << 29), /* make sure PCI INTx enabled */ - PIIX_FLAG_COMBINED = (1 << 30), /* combined mode possible */ + PIIX_FLAG_AHCI = (1 << 27), /* AHCI possible */ + PIIX_FLAG_CHECKINTR = (1 << 28), /* make sure PCI INTx enabled */ + PIIX_FLAG_COMBINED = (1 << 29), /* combined mode possible */ + /* ICH6/7 use different scheme for map value */ + PIIX_FLAG_COMBINED_ICH6 = PIIX_FLAG_COMBINED | (1 << 30), /* combined mode. if set, PATA is channel 0. * if clear, PATA is channel 1. @@ -297,8 +299,8 @@ static struct ata_port_info piix_port_info[] = { { .sht = &piix_sht, .host_flags = ATA_FLAG_SATA | ATA_FLAG_SRST | - PIIX_FLAG_COMBINED | PIIX_FLAG_CHECKINTR | - ATA_FLAG_SLAVE_POSS, + PIIX_FLAG_COMBINED_ICH6 | + PIIX_FLAG_CHECKINTR | ATA_FLAG_SLAVE_POSS, .pio_mask = 0x1f, /* pio0-4 */ .mwdma_mask = 0x07, /* mwdma0-2 */ .udma_mask = 0x7f, /* udma0-6 */ @@ -309,8 +311,9 @@ static struct ata_port_info piix_port_info[] = { { .sht = &piix_sht, .host_flags = ATA_FLAG_SATA | ATA_FLAG_SRST | - PIIX_FLAG_COMBINED | PIIX_FLAG_CHECKINTR | - ATA_FLAG_SLAVE_POSS | PIIX_FLAG_AHCI, + PIIX_FLAG_COMBINED_ICH6 | + PIIX_FLAG_CHECKINTR | ATA_FLAG_SLAVE_POSS | + PIIX_FLAG_AHCI, .pio_mask = 0x1f, /* pio0-4 */ .mwdma_mask = 0x07, /* mwdma0-2 */ .udma_mask = 0x7f, /* udma0-6 */ @@ -680,6 +683,7 @@ static int piix_init_one (struct pci_dev *pdev, const struct pci_device_id *ent) struct ata_port_info *port_info[2]; unsigned int combined = 0; unsigned int pata_chan = 0, sata_chan = 0; + unsigned long host_flags; if (!printed_version++) dev_printk(KERN_DEBUG, &pdev->dev, @@ -692,7 +696,9 @@ static int piix_init_one (struct pci_dev *pdev, const struct pci_device_id *ent) port_info[0] = &piix_port_info[ent->driver_data]; port_info[1] = &piix_port_info[ent->driver_data]; - if (port_info[0]->host_flags & PIIX_FLAG_AHCI) { + host_flags = port_info[0]->host_flags; + + if (host_flags & PIIX_FLAG_AHCI) { u8 tmp; pci_read_config_byte(pdev, PIIX_SCC, &tmp); if (tmp == PIIX_AHCI_DEVICE) { @@ -702,16 +708,35 @@ static int piix_init_one (struct pci_dev *pdev, const struct pci_device_id *ent) } } - if (port_info[0]->host_flags & PIIX_FLAG_COMBINED) { + if (host_flags & PIIX_FLAG_COMBINED) { u8 tmp; pci_read_config_byte(pdev, ICH5_PMR, &tmp); - if (tmp & PIIX_COMB) { - combined = 1; - if (tmp & PIIX_COMB_PATA_P0) + if (host_flags & PIIX_FLAG_COMBINED_ICH6) { + switch (tmp) { + case 0: + break; + case 1: + combined = 1; sata_chan = 1; - else + break; + case 2: + combined = 1; pata_chan = 1; + break; + case 3: + dev_printk(KERN_WARNING, &pdev->dev, + "invalid MAP value %u\n", tmp); + break; + } + } else { + if (tmp & PIIX_COMB) { + combined = 1; + if (tmp & PIIX_COMB_PATA_P0) + sata_chan = 1; + else + pata_chan = 1; + } } } @@ -721,7 +746,7 @@ static int piix_init_one (struct pci_dev *pdev, const struct pci_device_id *ent) * MSI is disabled (and it is disabled, as we don't use * message-signalled interrupts currently). */ - if (port_info[0]->host_flags & PIIX_FLAG_CHECKINTR) + if (host_flags & PIIX_FLAG_CHECKINTR) pci_intx(pdev, 1); if (combined) { -- cgit v1.2.1 From 4ba946e9d8e10fada7bbce527f6ea05842592e06 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Mon, 23 Jan 2006 13:09:36 +0900 Subject: [PATCH] libata: fold __ata_qc_complete() into ata_qc_free() All ata_qc_free() does is calling __ata_qc_complete() which isn't used anywhere else. Fold __ata_qc_complete() into ata_qc_free(). Signed-off-by: Tejun Heo Signed-off-by: Jeff Garzik --- drivers/scsi/libata-core.c | 30 ++++++++++++------------------ 1 file changed, 12 insertions(+), 18 deletions(-) (limited to 'drivers/scsi') diff --git a/drivers/scsi/libata-core.c b/drivers/scsi/libata-core.c index a07bd35da912..0e4932362949 100644 --- a/drivers/scsi/libata-core.c +++ b/drivers/scsi/libata-core.c @@ -73,7 +73,6 @@ static int fgb(u32 bitmap); static int ata_choose_xfer_mode(const struct ata_port *ap, u8 *xfer_mode_out, unsigned int *xfer_shift_out); -static void __ata_qc_complete(struct ata_queued_cmd *qc); static unsigned int ata_unique_id = 1; static struct workqueue_struct *ata_wq; @@ -3593,21 +3592,6 @@ struct ata_queued_cmd *ata_qc_new_init(struct ata_port *ap, return qc; } -static void __ata_qc_complete(struct ata_queued_cmd *qc) -{ - struct ata_port *ap = qc->ap; - unsigned int tag; - - qc->flags = 0; - tag = qc->tag; - if (likely(ata_tag_valid(tag))) { - if (tag == ap->active_tag) - ap->active_tag = ATA_TAG_POISON; - qc->tag = ATA_TAG_POISON; - clear_bit(tag, &ap->qactive); - } -} - /** * ata_qc_free - free unused ata_queued_cmd * @qc: Command to complete @@ -3620,9 +3604,19 @@ static void __ata_qc_complete(struct ata_queued_cmd *qc) */ void ata_qc_free(struct ata_queued_cmd *qc) { + struct ata_port *ap = qc->ap; + unsigned int tag; + assert(qc != NULL); /* ata_qc_from_tag _might_ return NULL */ - __ata_qc_complete(qc); + qc->flags = 0; + tag = qc->tag; + if (likely(ata_tag_valid(tag))) { + if (tag == ap->active_tag) + ap->active_tag = ATA_TAG_POISON; + qc->tag = ATA_TAG_POISON; + clear_bit(tag, &ap->qactive); + } } /** @@ -3662,7 +3656,7 @@ void ata_qc_complete(struct ata_queued_cmd *qc) if (rc != 0) return; - __ata_qc_complete(qc); + ata_qc_free(qc); VPRINTK("EXIT\n"); } -- cgit v1.2.1 From 77853bf2b48e34449e826a9ef4df5ea0dbe947f4 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Mon, 23 Jan 2006 13:09:36 +0900 Subject: [PATCH] libata: make the owner of a qc responsible for freeing it qc used to be freed automatically on command completion. However, as a qc can carry information about its completion status, it can be useful to its owner/issuer after command completion. This patch makes freeing qc responsibility of its owner. This simplifies ata_exec_internal() and makes command turn-around for atapi request sensing less hackish. This change was originally suggested by Jeff Garzik. Signed-off-by: Tejun Heo Signed-off-by: Jeff Garzik --- drivers/scsi/libata-core.c | 47 +++++++++++++--------------------------------- drivers/scsi/libata-scsi.c | 14 +++++++------- 2 files changed, 20 insertions(+), 41 deletions(-) (limited to 'drivers/scsi') diff --git a/drivers/scsi/libata-core.c b/drivers/scsi/libata-core.c index 0e4932362949..15df633521d0 100644 --- a/drivers/scsi/libata-core.c +++ b/drivers/scsi/libata-core.c @@ -1072,24 +1072,12 @@ static unsigned int ata_pio_modes(const struct ata_device *adev) timing API will get this right anyway */ } -struct ata_exec_internal_arg { - unsigned int err_mask; - struct ata_taskfile *tf; - struct completion *waiting; -}; - -int ata_qc_complete_internal(struct ata_queued_cmd *qc) +void ata_qc_complete_internal(struct ata_queued_cmd *qc) { - struct ata_exec_internal_arg *arg = qc->private_data; - struct completion *waiting = arg->waiting; + struct completion *waiting = qc->private_data; - if (!(qc->err_mask & ~AC_ERR_DEV)) - qc->ap->ops->tf_read(qc->ap, arg->tf); - arg->err_mask = qc->err_mask; - arg->waiting = NULL; + qc->ap->ops->tf_read(qc->ap, &qc->tf); complete(waiting); - - return 0; } /** @@ -1120,7 +1108,7 @@ ata_exec_internal(struct ata_port *ap, struct ata_device *dev, struct ata_queued_cmd *qc; DECLARE_COMPLETION(wait); unsigned long flags; - struct ata_exec_internal_arg arg; + unsigned int err_mask; spin_lock_irqsave(&ap->host_set->lock, flags); @@ -1134,9 +1122,7 @@ ata_exec_internal(struct ata_port *ap, struct ata_device *dev, qc->nsect = buflen / ATA_SECT_SIZE; } - arg.waiting = &wait; - arg.tf = tf; - qc->private_data = &arg; + qc->private_data = &wait; qc->complete_fn = ata_qc_complete_internal; if (ata_qc_issue(qc)) @@ -1153,7 +1139,7 @@ ata_exec_internal(struct ata_port *ap, struct ata_device *dev, * before the caller cleans up, it will result in a * spurious interrupt. We can live with that. */ - if (arg.waiting) { + if (qc->flags & ATA_QCFLAG_ACTIVE) { qc->err_mask = AC_ERR_OTHER; ata_qc_complete(qc); printk(KERN_WARNING "ata%u: qc timeout (cmd 0x%x)\n", @@ -1163,7 +1149,12 @@ ata_exec_internal(struct ata_port *ap, struct ata_device *dev, spin_unlock_irqrestore(&ap->host_set->lock, flags); } - return arg.err_mask; + *tf = qc->tf; + err_mask = qc->err_mask; + + ata_qc_free(qc); + + return err_mask; issue_fail: ata_qc_free(qc); @@ -3633,8 +3624,6 @@ void ata_qc_free(struct ata_queued_cmd *qc) void ata_qc_complete(struct ata_queued_cmd *qc) { - int rc; - assert(qc != NULL); /* ata_qc_from_tag _might_ return NULL */ assert(qc->flags & ATA_QCFLAG_ACTIVE); @@ -3648,17 +3637,7 @@ void ata_qc_complete(struct ata_queued_cmd *qc) qc->flags &= ~ATA_QCFLAG_ACTIVE; /* call completion callback */ - rc = qc->complete_fn(qc); - - /* if callback indicates not to complete command (non-zero), - * return immediately - */ - if (rc != 0) - return; - - ata_qc_free(qc); - - VPRINTK("EXIT\n"); + qc->complete_fn(qc); } static inline int ata_should_dma_map(struct ata_queued_cmd *qc) diff --git a/drivers/scsi/libata-scsi.c b/drivers/scsi/libata-scsi.c index 0e65bfe92e6f..ce3fe928a386 100644 --- a/drivers/scsi/libata-scsi.c +++ b/drivers/scsi/libata-scsi.c @@ -1219,7 +1219,7 @@ nothing_to_do: return 1; } -static int ata_scsi_qc_complete(struct ata_queued_cmd *qc) +static void ata_scsi_qc_complete(struct ata_queued_cmd *qc) { struct scsi_cmnd *cmd = qc->scsicmd; u8 *cdb = cmd->cmnd; @@ -1256,7 +1256,7 @@ static int ata_scsi_qc_complete(struct ata_queued_cmd *qc) qc->scsidone(cmd); - return 0; + ata_qc_free(qc); } /** @@ -1982,7 +1982,7 @@ void ata_scsi_badcmd(struct scsi_cmnd *cmd, void (*done)(struct scsi_cmnd *), u8 done(cmd); } -static int atapi_sense_complete(struct ata_queued_cmd *qc) +static void atapi_sense_complete(struct ata_queued_cmd *qc) { if (qc->err_mask && ((qc->err_mask & AC_ERR_DEV) == 0)) /* FIXME: not quite right; we don't want the @@ -1993,7 +1993,7 @@ static int atapi_sense_complete(struct ata_queued_cmd *qc) ata_gen_ata_desc_sense(qc); qc->scsidone(qc->scsicmd); - return 0; + ata_qc_free(qc); } /* is it pointless to prefer PIO for "safety reasons"? */ @@ -2050,7 +2050,7 @@ static void atapi_request_sense(struct ata_queued_cmd *qc) DPRINTK("EXIT\n"); } -static int atapi_qc_complete(struct ata_queued_cmd *qc) +static void atapi_qc_complete(struct ata_queued_cmd *qc) { struct scsi_cmnd *cmd = qc->scsicmd; unsigned int err_mask = qc->err_mask; @@ -2060,7 +2060,7 @@ static int atapi_qc_complete(struct ata_queued_cmd *qc) if (unlikely(err_mask & AC_ERR_DEV)) { cmd->result = SAM_STAT_CHECK_CONDITION; atapi_request_sense(qc); - return 1; + return; } else if (unlikely(err_mask)) @@ -2100,7 +2100,7 @@ static int atapi_qc_complete(struct ata_queued_cmd *qc) } qc->scsidone(cmd); - return 0; + ata_qc_free(qc); } /** * atapi_xlat - Initialize PACKET taskfile -- cgit v1.2.1 From 8e436af9326f5cc2e07d76505154ffddfb04b485 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Mon, 23 Jan 2006 13:09:36 +0900 Subject: [PATCH] libata: fix ata_qc_issue() error handling When ata_qc_issue() fails, the qc might have been dma mapped or not. So, performing only ata_qc_free() results in dma map leak. This patch makes ata_qc_issue() mark dma map flags correctly on failure and calls ata_qc_complete() after ata_qc_issue() fails. Signed-off-by: Tejun Heo Signed-off-by: Jeff Garzik --- drivers/scsi/libata-core.c | 18 ++++++++---------- drivers/scsi/libata-scsi.c | 6 ++++-- 2 files changed, 12 insertions(+), 12 deletions(-) (limited to 'drivers/scsi') diff --git a/drivers/scsi/libata-core.c b/drivers/scsi/libata-core.c index 15df633521d0..43a23286d6fe 100644 --- a/drivers/scsi/libata-core.c +++ b/drivers/scsi/libata-core.c @@ -1125,8 +1125,10 @@ ata_exec_internal(struct ata_port *ap, struct ata_device *dev, qc->private_data = &wait; qc->complete_fn = ata_qc_complete_internal; - if (ata_qc_issue(qc)) - goto issue_fail; + if (ata_qc_issue(qc)) { + qc->err_mask = AC_ERR_OTHER; + ata_qc_complete(qc); + } spin_unlock_irqrestore(&ap->host_set->lock, flags); @@ -1155,11 +1157,6 @@ ata_exec_internal(struct ata_port *ap, struct ata_device *dev, ata_qc_free(qc); return err_mask; - - issue_fail: - ata_qc_free(qc); - spin_unlock_irqrestore(&ap->host_set->lock, flags); - return AC_ERR_OTHER; } /** @@ -3687,10 +3684,10 @@ int ata_qc_issue(struct ata_queued_cmd *qc) if (ata_should_dma_map(qc)) { if (qc->flags & ATA_QCFLAG_SG) { if (ata_sg_setup(qc)) - goto err_out; + goto sg_err; } else if (qc->flags & ATA_QCFLAG_SINGLE) { if (ata_sg_setup_one(qc)) - goto err_out; + goto sg_err; } } else { qc->flags &= ~ATA_QCFLAG_DMAMAP; @@ -3703,7 +3700,8 @@ int ata_qc_issue(struct ata_queued_cmd *qc) return ap->ops->qc_issue(qc); -err_out: +sg_err: + qc->flags &= ~ATA_QCFLAG_DMAMAP; return -1; } diff --git a/drivers/scsi/libata-scsi.c b/drivers/scsi/libata-scsi.c index ce3fe928a386..c496309f691a 100644 --- a/drivers/scsi/libata-scsi.c +++ b/drivers/scsi/libata-scsi.c @@ -1322,8 +1322,10 @@ static void ata_scsi_translate(struct ata_port *ap, struct ata_device *dev, goto early_finish; /* select device, send command to hardware */ - if (ata_qc_issue(qc)) - goto err_did; + if (ata_qc_issue(qc)) { + qc->err_mask |= AC_ERR_OTHER; + ata_qc_complete(qc); + } VPRINTK("EXIT\n"); return; -- cgit v1.2.1 From 284b6481cc7112ca6a9e60b7a9b650fba3bf0492 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Mon, 23 Jan 2006 13:09:36 +0900 Subject: [PATCH] ahci: fix err_mask setting in ahci_host_intr In ahci_host_intr err_mask is determined from IRQ status but never used. This patch sets qc->err_mask to the determined err_mask. Signed-off-by: Tejun Heo Signed-off-by: Jeff Garzik --- drivers/scsi/ahci.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/scsi') diff --git a/drivers/scsi/ahci.c b/drivers/scsi/ahci.c index 30676b0eb366..a168b525d079 100644 --- a/drivers/scsi/ahci.c +++ b/drivers/scsi/ahci.c @@ -721,7 +721,7 @@ static inline int ahci_host_intr(struct ata_port *ap, struct ata_queued_cmd *qc) ahci_restart_port(ap, status); if (qc) { - qc->err_mask |= AC_ERR_OTHER; + qc->err_mask |= err_mask; ata_qc_complete(qc); } } -- cgit v1.2.1 From 11a56d2439259892319df81cf1582687d7e7fde5 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Mon, 23 Jan 2006 13:09:36 +0900 Subject: [PATCH] libata: add detailed AC_ERR_* flags Add detailed AC_ERR_* flags and use them. Long-term goal is to describe all errors with err_mask and tf combination (tf for failed sector information, etc...). After proper error diagnosis is implemented, sense data should also be generated from err_mask instead of directly from hardware tf registers as it is currently. Signed-off-by: Tejun Heo Signed-off-by: Jeff Garzik --- drivers/scsi/ahci.c | 2 +- drivers/scsi/libata-core.c | 12 ++++++------ drivers/scsi/sata_mv.c | 2 +- drivers/scsi/sata_sil24.c | 2 +- 4 files changed, 9 insertions(+), 9 deletions(-) (limited to 'drivers/scsi') diff --git a/drivers/scsi/ahci.c b/drivers/scsi/ahci.c index a168b525d079..bb3686ae1885 100644 --- a/drivers/scsi/ahci.c +++ b/drivers/scsi/ahci.c @@ -680,7 +680,7 @@ static void ahci_eng_timeout(struct ata_port *ap) * not being called from the SCSI EH. */ qc->scsidone = scsi_finish_command; - qc->err_mask |= AC_ERR_OTHER; + qc->err_mask |= AC_ERR_TIMEOUT; ata_qc_complete(qc); } diff --git a/drivers/scsi/libata-core.c b/drivers/scsi/libata-core.c index 43a23286d6fe..f5519f01491c 100644 --- a/drivers/scsi/libata-core.c +++ b/drivers/scsi/libata-core.c @@ -1142,7 +1142,7 @@ ata_exec_internal(struct ata_port *ap, struct ata_device *dev, * spurious interrupt. We can live with that. */ if (qc->flags & ATA_QCFLAG_ACTIVE) { - qc->err_mask = AC_ERR_OTHER; + qc->err_mask = AC_ERR_TIMEOUT; ata_qc_complete(qc); printk(KERN_WARNING "ata%u: qc timeout (cmd 0x%x)\n", ap->id, command); @@ -2917,7 +2917,7 @@ static unsigned long ata_pio_poll(struct ata_port *ap) status = ata_chk_status(ap); if (status & ATA_BUSY) { if (time_after(jiffies, ap->pio_task_timeout)) { - qc->err_mask |= AC_ERR_ATA_BUS; + qc->err_mask |= AC_ERR_TIMEOUT; ap->hsm_task_state = HSM_ST_TMOUT; return 0; } @@ -3295,7 +3295,7 @@ static void atapi_pio_bytes(struct ata_queued_cmd *qc) err_out: printk(KERN_INFO "ata%u: dev %u: ATAPI check failed\n", ap->id, dev->devno); - qc->err_mask |= AC_ERR_ATA_BUS; + qc->err_mask |= AC_ERR_HSM; ap->hsm_task_state = HSM_ST_ERR; } @@ -3353,7 +3353,7 @@ static void ata_pio_block(struct ata_port *ap) } else { /* handle BSY=0, DRQ=0 as error */ if ((status & ATA_DRQ) == 0) { - qc->err_mask |= AC_ERR_ATA_BUS; + qc->err_mask |= AC_ERR_HSM; ap->hsm_task_state = HSM_ST_ERR; return; } @@ -4159,14 +4159,14 @@ static void atapi_packet_task(void *_data) /* sleep-wait for BSY to clear */ DPRINTK("busy wait\n"); if (ata_busy_sleep(ap, ATA_TMOUT_CDB_QUICK, ATA_TMOUT_CDB)) { - qc->err_mask |= AC_ERR_ATA_BUS; + qc->err_mask |= AC_ERR_TIMEOUT; goto err_out; } /* make sure DRQ is set */ status = ata_chk_status(ap); if ((status & (ATA_BUSY | ATA_DRQ)) != ATA_DRQ) { - qc->err_mask |= AC_ERR_ATA_BUS; + qc->err_mask |= AC_ERR_HSM; goto err_out; } diff --git a/drivers/scsi/sata_mv.c b/drivers/scsi/sata_mv.c index cd54244058b5..89bcd85fa58c 100644 --- a/drivers/scsi/sata_mv.c +++ b/drivers/scsi/sata_mv.c @@ -1866,7 +1866,7 @@ static void mv_eng_timeout(struct ata_port *ap) */ spin_lock_irqsave(&ap->host_set->lock, flags); qc->scsidone = scsi_finish_command; - qc->err_mask |= AC_ERR_OTHER; + qc->err_mask |= AC_ERR_TIMEOUT; ata_qc_complete(qc); spin_unlock_irqrestore(&ap->host_set->lock, flags); } diff --git a/drivers/scsi/sata_sil24.c b/drivers/scsi/sata_sil24.c index 923130185a9e..fb59012b9fbe 100644 --- a/drivers/scsi/sata_sil24.c +++ b/drivers/scsi/sata_sil24.c @@ -653,7 +653,7 @@ static void sil24_eng_timeout(struct ata_port *ap) */ printk(KERN_ERR "ata%u: command timeout\n", ap->id); qc->scsidone = scsi_finish_command; - qc->err_mask |= AC_ERR_OTHER; + qc->err_mask |= AC_ERR_TIMEOUT; ata_qc_complete(qc); sil24_reset_controller(ap); -- cgit v1.2.1 From 9a3d9eb0177eb10500d49cd283b35576082a522d Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Mon, 23 Jan 2006 13:09:36 +0900 Subject: [PATCH] libata: return AC_ERR_* from issue functions Return AC_ERR_* mask from issue fuctions instead of 0/-1. This enables things like failing a qc with AC_ERR_HSM when the device doesn't set DRDY when the qc is about to be issued. Signed-off-by: Tejun Heo Signed-off-by: Jeff Garzik --- drivers/scsi/ahci.c | 4 ++-- drivers/scsi/libata-core.c | 17 ++++++++--------- drivers/scsi/libata-scsi.c | 10 ++++------ drivers/scsi/libata.h | 2 +- drivers/scsi/pdc_adma.c | 4 ++-- drivers/scsi/sata_mv.c | 4 ++-- drivers/scsi/sata_promise.c | 4 ++-- drivers/scsi/sata_qstor.c | 4 ++-- drivers/scsi/sata_sil24.c | 4 ++-- drivers/scsi/sata_sx4.c | 4 ++-- 10 files changed, 27 insertions(+), 30 deletions(-) (limited to 'drivers/scsi') diff --git a/drivers/scsi/ahci.c b/drivers/scsi/ahci.c index bb3686ae1885..0f6e4dd22901 100644 --- a/drivers/scsi/ahci.c +++ b/drivers/scsi/ahci.c @@ -184,7 +184,7 @@ struct ahci_port_priv { static u32 ahci_scr_read (struct ata_port *ap, unsigned int sc_reg); static void ahci_scr_write (struct ata_port *ap, unsigned int sc_reg, u32 val); static int ahci_init_one (struct pci_dev *pdev, const struct pci_device_id *ent); -static int ahci_qc_issue(struct ata_queued_cmd *qc); +static unsigned int ahci_qc_issue(struct ata_queued_cmd *qc); static irqreturn_t ahci_interrupt (int irq, void *dev_instance, struct pt_regs *regs); static void ahci_phy_reset(struct ata_port *ap); static void ahci_irq_clear(struct ata_port *ap); @@ -800,7 +800,7 @@ static irqreturn_t ahci_interrupt (int irq, void *dev_instance, struct pt_regs * return IRQ_RETVAL(handled); } -static int ahci_qc_issue(struct ata_queued_cmd *qc) +static unsigned int ahci_qc_issue(struct ata_queued_cmd *qc) { struct ata_port *ap = qc->ap; void __iomem *port_mmio = (void __iomem *) ap->ioaddr.cmd_addr; diff --git a/drivers/scsi/libata-core.c b/drivers/scsi/libata-core.c index f5519f01491c..b29bf0dc948a 100644 --- a/drivers/scsi/libata-core.c +++ b/drivers/scsi/libata-core.c @@ -1125,10 +1125,9 @@ ata_exec_internal(struct ata_port *ap, struct ata_device *dev, qc->private_data = &wait; qc->complete_fn = ata_qc_complete_internal; - if (ata_qc_issue(qc)) { - qc->err_mask = AC_ERR_OTHER; + qc->err_mask = ata_qc_issue(qc); + if (qc->err_mask) ata_qc_complete(qc); - } spin_unlock_irqrestore(&ap->host_set->lock, flags); @@ -3674,10 +3673,10 @@ static inline int ata_should_dma_map(struct ata_queued_cmd *qc) * spin_lock_irqsave(host_set lock) * * RETURNS: - * Zero on success, negative on error. + * Zero on success, AC_ERR_* mask on failure */ -int ata_qc_issue(struct ata_queued_cmd *qc) +unsigned int ata_qc_issue(struct ata_queued_cmd *qc) { struct ata_port *ap = qc->ap; @@ -3702,7 +3701,7 @@ int ata_qc_issue(struct ata_queued_cmd *qc) sg_err: qc->flags &= ~ATA_QCFLAG_DMAMAP; - return -1; + return AC_ERR_SYSTEM; } @@ -3721,10 +3720,10 @@ sg_err: * spin_lock_irqsave(host_set lock) * * RETURNS: - * Zero on success, negative on error. + * Zero on success, AC_ERR_* mask on failure */ -int ata_qc_issue_prot(struct ata_queued_cmd *qc) +unsigned int ata_qc_issue_prot(struct ata_queued_cmd *qc) { struct ata_port *ap = qc->ap; @@ -3769,7 +3768,7 @@ int ata_qc_issue_prot(struct ata_queued_cmd *qc) default: WARN_ON(1); - return -1; + return AC_ERR_SYSTEM; } return 0; diff --git a/drivers/scsi/libata-scsi.c b/drivers/scsi/libata-scsi.c index c496309f691a..95e3c278dd43 100644 --- a/drivers/scsi/libata-scsi.c +++ b/drivers/scsi/libata-scsi.c @@ -1322,10 +1322,9 @@ static void ata_scsi_translate(struct ata_port *ap, struct ata_device *dev, goto early_finish; /* select device, send command to hardware */ - if (ata_qc_issue(qc)) { - qc->err_mask |= AC_ERR_OTHER; + qc->err_mask = ata_qc_issue(qc); + if (qc->err_mask) ata_qc_complete(qc); - } VPRINTK("EXIT\n"); return; @@ -2044,10 +2043,9 @@ static void atapi_request_sense(struct ata_queued_cmd *qc) qc->complete_fn = atapi_sense_complete; - if (ata_qc_issue(qc)) { - qc->err_mask |= AC_ERR_OTHER; + qc->err_mask = ata_qc_issue(qc); + if (qc->err_mask) ata_qc_complete(qc); - } DPRINTK("EXIT\n"); } diff --git a/drivers/scsi/libata.h b/drivers/scsi/libata.h index e03ce48b7b4b..9d76923a2253 100644 --- a/drivers/scsi/libata.h +++ b/drivers/scsi/libata.h @@ -45,7 +45,7 @@ extern struct ata_queued_cmd *ata_qc_new_init(struct ata_port *ap, struct ata_device *dev); extern int ata_rwcmd_protocol(struct ata_queued_cmd *qc); extern void ata_qc_free(struct ata_queued_cmd *qc); -extern int ata_qc_issue(struct ata_queued_cmd *qc); +extern unsigned int ata_qc_issue(struct ata_queued_cmd *qc); extern int ata_check_atapi_dma(struct ata_queued_cmd *qc); extern void ata_dev_select(struct ata_port *ap, unsigned int device, unsigned int wait, unsigned int can_sleep); diff --git a/drivers/scsi/pdc_adma.c b/drivers/scsi/pdc_adma.c index e8df0c9ec1e6..3a6bf58dc37b 100644 --- a/drivers/scsi/pdc_adma.c +++ b/drivers/scsi/pdc_adma.c @@ -131,7 +131,7 @@ static void adma_host_stop(struct ata_host_set *host_set); static void adma_port_stop(struct ata_port *ap); static void adma_phy_reset(struct ata_port *ap); static void adma_qc_prep(struct ata_queued_cmd *qc); -static int adma_qc_issue(struct ata_queued_cmd *qc); +static unsigned int adma_qc_issue(struct ata_queued_cmd *qc); static int adma_check_atapi_dma(struct ata_queued_cmd *qc); static void adma_bmdma_stop(struct ata_queued_cmd *qc); static u8 adma_bmdma_status(struct ata_port *ap); @@ -419,7 +419,7 @@ static inline void adma_packet_start(struct ata_queued_cmd *qc) writew(aPIOMD4 | aGO, chan + ADMA_CONTROL); } -static int adma_qc_issue(struct ata_queued_cmd *qc) +static unsigned int adma_qc_issue(struct ata_queued_cmd *qc) { struct adma_port_priv *pp = qc->ap->private_data; diff --git a/drivers/scsi/sata_mv.c b/drivers/scsi/sata_mv.c index 89bcd85fa58c..281223a0e45f 100644 --- a/drivers/scsi/sata_mv.c +++ b/drivers/scsi/sata_mv.c @@ -328,7 +328,7 @@ static void mv_host_stop(struct ata_host_set *host_set); static int mv_port_start(struct ata_port *ap); static void mv_port_stop(struct ata_port *ap); static void mv_qc_prep(struct ata_queued_cmd *qc); -static int mv_qc_issue(struct ata_queued_cmd *qc); +static unsigned int mv_qc_issue(struct ata_queued_cmd *qc); static irqreturn_t mv_interrupt(int irq, void *dev_instance, struct pt_regs *regs); static void mv_eng_timeout(struct ata_port *ap); @@ -1040,7 +1040,7 @@ static void mv_qc_prep(struct ata_queued_cmd *qc) * LOCKING: * Inherited from caller. */ -static int mv_qc_issue(struct ata_queued_cmd *qc) +static unsigned int mv_qc_issue(struct ata_queued_cmd *qc) { void __iomem *port_mmio = mv_ap_base(qc->ap); struct mv_port_priv *pp = qc->ap->private_data; diff --git a/drivers/scsi/sata_promise.c b/drivers/scsi/sata_promise.c index b0b0a69b3563..bac36d5b7c3e 100644 --- a/drivers/scsi/sata_promise.c +++ b/drivers/scsi/sata_promise.c @@ -95,7 +95,7 @@ static void pdc_qc_prep(struct ata_queued_cmd *qc); static void pdc_tf_load_mmio(struct ata_port *ap, const struct ata_taskfile *tf); static void pdc_exec_command_mmio(struct ata_port *ap, const struct ata_taskfile *tf); static void pdc_irq_clear(struct ata_port *ap); -static int pdc_qc_issue_prot(struct ata_queued_cmd *qc); +static unsigned int pdc_qc_issue_prot(struct ata_queued_cmd *qc); static struct scsi_host_template pdc_ata_sht = { @@ -544,7 +544,7 @@ static inline void pdc_packet_start(struct ata_queued_cmd *qc) readl((void __iomem *) ap->ioaddr.cmd_addr + PDC_PKT_SUBMIT); /* flush */ } -static int pdc_qc_issue_prot(struct ata_queued_cmd *qc) +static unsigned int pdc_qc_issue_prot(struct ata_queued_cmd *qc) { switch (qc->tf.protocol) { case ATA_PROT_DMA: diff --git a/drivers/scsi/sata_qstor.c b/drivers/scsi/sata_qstor.c index de05e2883f9c..2afbeb77f6fe 100644 --- a/drivers/scsi/sata_qstor.c +++ b/drivers/scsi/sata_qstor.c @@ -120,7 +120,7 @@ static void qs_host_stop(struct ata_host_set *host_set); static void qs_port_stop(struct ata_port *ap); static void qs_phy_reset(struct ata_port *ap); static void qs_qc_prep(struct ata_queued_cmd *qc); -static int qs_qc_issue(struct ata_queued_cmd *qc); +static unsigned int qs_qc_issue(struct ata_queued_cmd *qc); static int qs_check_atapi_dma(struct ata_queued_cmd *qc); static void qs_bmdma_stop(struct ata_queued_cmd *qc); static u8 qs_bmdma_status(struct ata_port *ap); @@ -352,7 +352,7 @@ static inline void qs_packet_start(struct ata_queued_cmd *qc) readl(chan + QS_CCT_CFF); /* flush */ } -static int qs_qc_issue(struct ata_queued_cmd *qc) +static unsigned int qs_qc_issue(struct ata_queued_cmd *qc) { struct qs_port_priv *pp = qc->ap->private_data; diff --git a/drivers/scsi/sata_sil24.c b/drivers/scsi/sata_sil24.c index fb59012b9fbe..5a7a7b1d4add 100644 --- a/drivers/scsi/sata_sil24.c +++ b/drivers/scsi/sata_sil24.c @@ -251,7 +251,7 @@ static void sil24_scr_write(struct ata_port *ap, unsigned sc_reg, u32 val); static void sil24_tf_read(struct ata_port *ap, struct ata_taskfile *tf); static void sil24_phy_reset(struct ata_port *ap); static void sil24_qc_prep(struct ata_queued_cmd *qc); -static int sil24_qc_issue(struct ata_queued_cmd *qc); +static unsigned int sil24_qc_issue(struct ata_queued_cmd *qc); static void sil24_irq_clear(struct ata_port *ap); static void sil24_eng_timeout(struct ata_port *ap); static irqreturn_t sil24_interrupt(int irq, void *dev_instance, struct pt_regs *regs); @@ -557,7 +557,7 @@ static void sil24_qc_prep(struct ata_queued_cmd *qc) sil24_fill_sg(qc, sge); } -static int sil24_qc_issue(struct ata_queued_cmd *qc) +static unsigned int sil24_qc_issue(struct ata_queued_cmd *qc) { struct ata_port *ap = qc->ap; void __iomem *port = (void __iomem *)ap->ioaddr.cmd_addr; diff --git a/drivers/scsi/sata_sx4.c b/drivers/scsi/sata_sx4.c index bc87c16c80d2..3175c6bb4fec 100644 --- a/drivers/scsi/sata_sx4.c +++ b/drivers/scsi/sata_sx4.c @@ -174,7 +174,7 @@ static void pdc20621_get_from_dimm(struct ata_probe_ent *pe, static void pdc20621_put_to_dimm(struct ata_probe_ent *pe, void *psource, u32 offset, u32 size); static void pdc20621_irq_clear(struct ata_port *ap); -static int pdc20621_qc_issue_prot(struct ata_queued_cmd *qc); +static unsigned int pdc20621_qc_issue_prot(struct ata_queued_cmd *qc); static struct scsi_host_template pdc_sata_sht = { @@ -678,7 +678,7 @@ static void pdc20621_packet_start(struct ata_queued_cmd *qc) } } -static int pdc20621_qc_issue_prot(struct ata_queued_cmd *qc) +static unsigned int pdc20621_qc_issue_prot(struct ata_queued_cmd *qc) { switch (qc->tf.protocol) { case ATA_PROT_DMA: -- cgit v1.2.1 From 041c5fc33cb7ed4fe5322585a611fb6e29a05d3a Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Mon, 23 Jan 2006 13:09:36 +0900 Subject: [PATCH] SCSI: export scsi_eh_finish_cmd() and scsi_eh_flush_done_q() Export two SCSI EH command handling functions. To be used by libata EH. Signed-off-by: Tejun Heo Signed-off-by: Jeff Garzik --- drivers/scsi/scsi_error.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) (limited to 'drivers/scsi') diff --git a/drivers/scsi/scsi_error.c b/drivers/scsi/scsi_error.c index a2333d2c7af0..6bac3d2668fa 100644 --- a/drivers/scsi/scsi_error.c +++ b/drivers/scsi/scsi_error.c @@ -584,8 +584,7 @@ static int scsi_request_sense(struct scsi_cmnd *scmd) * keep a list of pending commands for final completion, and once we * are ready to leave error handling we handle completion for real. **/ -static void scsi_eh_finish_cmd(struct scsi_cmnd *scmd, - struct list_head *done_q) +void scsi_eh_finish_cmd(struct scsi_cmnd *scmd, struct list_head *done_q) { scmd->device->host->host_failed--; scmd->eh_eflags = 0; @@ -597,6 +596,7 @@ static void scsi_eh_finish_cmd(struct scsi_cmnd *scmd, scsi_setup_cmd_retry(scmd); list_move_tail(&scmd->eh_entry, done_q); } +EXPORT_SYMBOL(scsi_eh_finish_cmd); /** * scsi_eh_get_sense - Get device sense data. @@ -1425,7 +1425,7 @@ static void scsi_eh_ready_devs(struct Scsi_Host *shost, * @done_q: list_head of processed commands. * **/ -static void scsi_eh_flush_done_q(struct list_head *done_q) +void scsi_eh_flush_done_q(struct list_head *done_q) { struct scsi_cmnd *scmd, *next; @@ -1454,6 +1454,7 @@ static void scsi_eh_flush_done_q(struct list_head *done_q) } } } +EXPORT_SYMBOL(scsi_eh_flush_done_q); /** * scsi_unjam_host - Attempt to fix a host which has a cmd that failed. -- cgit v1.2.1 From a72ec4ce6d3ae92e76baf5b2c65cc26e5e775e83 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Mon, 23 Jan 2006 13:09:37 +0900 Subject: [PATCH] libata: implement and apply ata_eh_qc_complete/retry() Implement ata_eh_qc_complete/retry() using scsi_eh_finish_cmd() and scsi_eh_flush_done_q(). This removes all eh scsicmd finish hacks from low level drivers. This change was first suggested by Jeff Garzik. Signed-off-by: Tejun Heo Signed-off-by: Jeff Garzik --- drivers/scsi/ahci.c | 12 +++------ drivers/scsi/libata-core.c | 14 ++++------- drivers/scsi/libata-scsi.c | 59 ++++++++++++++++++++++++++++++++++++++++----- drivers/scsi/sata_mv.c | 12 +-------- drivers/scsi/sata_promise.c | 12 ++------- drivers/scsi/sata_sil24.c | 10 +------- drivers/scsi/sata_sx4.c | 12 ++------- 7 files changed, 67 insertions(+), 64 deletions(-) (limited to 'drivers/scsi') diff --git a/drivers/scsi/ahci.c b/drivers/scsi/ahci.c index 0f6e4dd22901..5a6b23009897 100644 --- a/drivers/scsi/ahci.c +++ b/drivers/scsi/ahci.c @@ -672,19 +672,13 @@ static void ahci_eng_timeout(struct ata_port *ap) ap->id); } else { ahci_restart_port(ap, readl(port_mmio + PORT_IRQ_STAT)); - - /* hack alert! We cannot use the supplied completion - * function from inside the ->eh_strategy_handler() thread. - * libata is the only user of ->eh_strategy_handler() in - * any kernel, so the default scsi_done() assumes it is - * not being called from the SCSI EH. - */ - qc->scsidone = scsi_finish_command; qc->err_mask |= AC_ERR_TIMEOUT; - ata_qc_complete(qc); } spin_unlock_irqrestore(&host_set->lock, flags); + + if (qc) + ata_eh_qc_complete(qc); } static inline int ahci_host_intr(struct ata_port *ap, struct ata_queued_cmd *qc) diff --git a/drivers/scsi/libata-core.c b/drivers/scsi/libata-core.c index b29bf0dc948a..93ae2dcc837c 100644 --- a/drivers/scsi/libata-core.c +++ b/drivers/scsi/libata-core.c @@ -3449,14 +3449,6 @@ static void ata_qc_timeout(struct ata_queued_cmd *qc) spin_lock_irqsave(&host_set->lock, flags); - /* hack alert! We cannot use the supplied completion - * function from inside the ->eh_strategy_handler() thread. - * libata is the only user of ->eh_strategy_handler() in - * any kernel, so the default scsi_done() assumes it is - * not being called from the SCSI EH. - */ - qc->scsidone = scsi_finish_command; - switch (qc->tf.protocol) { case ATA_PROT_DMA: @@ -3480,12 +3472,13 @@ static void ata_qc_timeout(struct ata_queued_cmd *qc) /* complete taskfile transaction */ qc->err_mask |= ac_err_mask(drv_stat); - ata_qc_complete(qc); break; } spin_unlock_irqrestore(&host_set->lock, flags); + ata_eh_qc_complete(qc); + DPRINTK("EXIT\n"); } @@ -4422,6 +4415,7 @@ static void ata_host_init(struct ata_port *ap, struct Scsi_Host *host, INIT_WORK(&ap->packet_task, atapi_packet_task, ap); INIT_WORK(&ap->pio_task, ata_pio_task, ap); + INIT_LIST_HEAD(&ap->eh_done_q); for (i = 0; i < ATA_MAX_DEVICES; i++) ap->device[i].devno = i; @@ -5165,6 +5159,8 @@ EXPORT_SYMBOL_GPL(ata_dev_classify); EXPORT_SYMBOL_GPL(ata_dev_id_string); EXPORT_SYMBOL_GPL(ata_dev_config); EXPORT_SYMBOL_GPL(ata_scsi_simulate); +EXPORT_SYMBOL_GPL(ata_eh_qc_complete); +EXPORT_SYMBOL_GPL(ata_eh_qc_retry); EXPORT_SYMBOL_GPL(ata_pio_need_iordy); EXPORT_SYMBOL_GPL(ata_timing_compute); diff --git a/drivers/scsi/libata-scsi.c b/drivers/scsi/libata-scsi.c index 95e3c278dd43..ab6b53349d6f 100644 --- a/drivers/scsi/libata-scsi.c +++ b/drivers/scsi/libata-scsi.c @@ -738,17 +738,64 @@ int ata_scsi_error(struct Scsi_Host *host) ap = (struct ata_port *) &host->hostdata[0]; ap->ops->eng_timeout(ap); - /* TODO: this is per-command; when queueing is supported - * this code will either change or move to a more - * appropriate place - */ - host->host_failed--; - INIT_LIST_HEAD(&host->eh_cmd_q); + assert(host->host_failed == 0 && list_empty(&host->eh_cmd_q)); + + scsi_eh_flush_done_q(&ap->eh_done_q); DPRINTK("EXIT\n"); return 0; } +static void ata_eh_scsidone(struct scsi_cmnd *scmd) +{ + /* nada */ +} + +static void __ata_eh_qc_complete(struct ata_queued_cmd *qc) +{ + struct ata_port *ap = qc->ap; + struct scsi_cmnd *scmd = qc->scsicmd; + unsigned long flags; + + spin_lock_irqsave(&ap->host_set->lock, flags); + qc->scsidone = ata_eh_scsidone; + ata_qc_complete(qc); + assert(!ata_tag_valid(qc->tag)); + spin_unlock_irqrestore(&ap->host_set->lock, flags); + + scsi_eh_finish_cmd(scmd, &ap->eh_done_q); +} + +/** + * ata_eh_qc_complete - Complete an active ATA command from EH + * @qc: Command to complete + * + * Indicate to the mid and upper layers that an ATA command has + * completed. To be used from EH. + */ +void ata_eh_qc_complete(struct ata_queued_cmd *qc) +{ + struct scsi_cmnd *scmd = qc->scsicmd; + scmd->retries = scmd->allowed; + __ata_eh_qc_complete(qc); +} + +/** + * ata_eh_qc_retry - Tell midlayer to retry an ATA command after EH + * @qc: Command to retry + * + * Indicate to the mid and upper layers that an ATA command + * should be retried. To be used from EH. + * + * SCSI midlayer limits the number of retries to scmd->allowed. + * This function might need to adjust scmd->retries for commands + * which get retried due to unrelated NCQ failures. + */ +void ata_eh_qc_retry(struct ata_queued_cmd *qc) +{ + __ata_eh_qc_complete(qc); +} + /** * ata_scsi_start_stop_xlat - Translate SCSI START STOP UNIT command * @qc: Storage for translated ATA taskfile diff --git a/drivers/scsi/sata_mv.c b/drivers/scsi/sata_mv.c index 281223a0e45f..d9a554ca45c7 100644 --- a/drivers/scsi/sata_mv.c +++ b/drivers/scsi/sata_mv.c @@ -1839,7 +1839,6 @@ static void mv_phy_reset(struct ata_port *ap) static void mv_eng_timeout(struct ata_port *ap) { struct ata_queued_cmd *qc; - unsigned long flags; printk(KERN_ERR "ata%u: Entering mv_eng_timeout\n",ap->id); DPRINTK("All regs @ start of eng_timeout\n"); @@ -1858,17 +1857,8 @@ static void mv_eng_timeout(struct ata_port *ap) printk(KERN_ERR "ata%u: BUG: timeout without command\n", ap->id); } else { - /* hack alert! We cannot use the supplied completion - * function from inside the ->eh_strategy_handler() thread. - * libata is the only user of ->eh_strategy_handler() in - * any kernel, so the default scsi_done() assumes it is - * not being called from the SCSI EH. - */ - spin_lock_irqsave(&ap->host_set->lock, flags); - qc->scsidone = scsi_finish_command; qc->err_mask |= AC_ERR_TIMEOUT; - ata_qc_complete(qc); - spin_unlock_irqrestore(&ap->host_set->lock, flags); + ata_eh_qc_complete(qc); } } diff --git a/drivers/scsi/sata_promise.c b/drivers/scsi/sata_promise.c index bac36d5b7c3e..77ef646b0f92 100644 --- a/drivers/scsi/sata_promise.c +++ b/drivers/scsi/sata_promise.c @@ -400,21 +400,12 @@ static void pdc_eng_timeout(struct ata_port *ap) goto out; } - /* hack alert! We cannot use the supplied completion - * function from inside the ->eh_strategy_handler() thread. - * libata is the only user of ->eh_strategy_handler() in - * any kernel, so the default scsi_done() assumes it is - * not being called from the SCSI EH. - */ - qc->scsidone = scsi_finish_command; - switch (qc->tf.protocol) { case ATA_PROT_DMA: case ATA_PROT_NODATA: printk(KERN_ERR "ata%u: command timeout\n", ap->id); drv_stat = ata_wait_idle(ap); qc->err_mask |= __ac_err_mask(drv_stat); - ata_qc_complete(qc); break; default: @@ -424,12 +415,13 @@ static void pdc_eng_timeout(struct ata_port *ap) ap->id, qc->tf.command, drv_stat); qc->err_mask |= ac_err_mask(drv_stat); - ata_qc_complete(qc); break; } out: spin_unlock_irqrestore(&host_set->lock, flags); + if (qc) + ata_eh_qc_complete(qc); DPRINTK("EXIT\n"); } diff --git a/drivers/scsi/sata_sil24.c b/drivers/scsi/sata_sil24.c index 5a7a7b1d4add..7222fc7ff3fc 100644 --- a/drivers/scsi/sata_sil24.c +++ b/drivers/scsi/sata_sil24.c @@ -644,17 +644,9 @@ static void sil24_eng_timeout(struct ata_port *ap) return; } - /* - * hack alert! We cannot use the supplied completion - * function from inside the ->eh_strategy_handler() thread. - * libata is the only user of ->eh_strategy_handler() in - * any kernel, so the default scsi_done() assumes it is - * not being called from the SCSI EH. - */ printk(KERN_ERR "ata%u: command timeout\n", ap->id); - qc->scsidone = scsi_finish_command; qc->err_mask |= AC_ERR_TIMEOUT; - ata_qc_complete(qc); + ata_eh_qc_complete(qc); sil24_reset_controller(ap); } diff --git a/drivers/scsi/sata_sx4.c b/drivers/scsi/sata_sx4.c index 3175c6bb4fec..9f992fbcf2e7 100644 --- a/drivers/scsi/sata_sx4.c +++ b/drivers/scsi/sata_sx4.c @@ -872,20 +872,11 @@ static void pdc_eng_timeout(struct ata_port *ap) goto out; } - /* hack alert! We cannot use the supplied completion - * function from inside the ->eh_strategy_handler() thread. - * libata is the only user of ->eh_strategy_handler() in - * any kernel, so the default scsi_done() assumes it is - * not being called from the SCSI EH. - */ - qc->scsidone = scsi_finish_command; - switch (qc->tf.protocol) { case ATA_PROT_DMA: case ATA_PROT_NODATA: printk(KERN_ERR "ata%u: command timeout\n", ap->id); qc->err_mask |= __ac_err_mask(ata_wait_idle(ap)); - ata_qc_complete(qc); break; default: @@ -895,12 +886,13 @@ static void pdc_eng_timeout(struct ata_port *ap) ap->id, qc->tf.command, drv_stat); qc->err_mask |= ac_err_mask(drv_stat); - ata_qc_complete(qc); break; } out: spin_unlock_irqrestore(&host_set->lock, flags); + if (qc) + ata_eh_qc_complete(qc); DPRINTK("EXIT\n"); } -- cgit v1.2.1 From 9506437921504df18c6601f7d09bb23d72d2f6ba Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Mon, 23 Jan 2006 13:09:37 +0900 Subject: [PATCH] libata: create pio/atapi task queueing wrappers Wrap pio/atapi task queueing in correspondingly named functions. This change doesn't change anything. It's preparation for follow-up pio-task/eh sync patch. Signed-off-by: Tejun Heo Signed-off-by: Jeff Garzik --- drivers/scsi/libata-core.c | 30 ++++++++++++++++++++++++------ 1 file changed, 24 insertions(+), 6 deletions(-) (limited to 'drivers/scsi') diff --git a/drivers/scsi/libata-core.c b/drivers/scsi/libata-core.c index 93ae2dcc837c..71de697e2327 100644 --- a/drivers/scsi/libata-core.c +++ b/drivers/scsi/libata-core.c @@ -1072,6 +1072,24 @@ static unsigned int ata_pio_modes(const struct ata_device *adev) timing API will get this right anyway */ } +static inline void +ata_queue_packet_task(struct ata_port *ap) +{ + queue_work(ata_wq, &ap->packet_task); +} + +static inline void +ata_queue_pio_task(struct ata_port *ap) +{ + queue_work(ata_wq, &ap->pio_task); +} + +static inline void +ata_queue_delayed_pio_task(struct ata_port *ap, unsigned long delay) +{ + queue_delayed_work(ata_wq, &ap->pio_task, delay); +} + void ata_qc_complete_internal(struct ata_queued_cmd *qc) { struct completion *waiting = qc->private_data; @@ -3414,7 +3432,7 @@ fsm_start: } if (timeout) - queue_delayed_work(ata_wq, &ap->pio_task, timeout); + ata_queue_delayed_pio_task(ap, timeout); else if (!qc_completed) goto fsm_start; } @@ -3737,26 +3755,26 @@ unsigned int ata_qc_issue_prot(struct ata_queued_cmd *qc) ata_qc_set_polling(qc); ata_tf_to_host(ap, &qc->tf); ap->hsm_task_state = HSM_ST; - queue_work(ata_wq, &ap->pio_task); + ata_queue_pio_task(ap); break; case ATA_PROT_ATAPI: ata_qc_set_polling(qc); ata_tf_to_host(ap, &qc->tf); - queue_work(ata_wq, &ap->packet_task); + ata_queue_packet_task(ap); break; case ATA_PROT_ATAPI_NODATA: ap->flags |= ATA_FLAG_NOINTR; ata_tf_to_host(ap, &qc->tf); - queue_work(ata_wq, &ap->packet_task); + ata_queue_packet_task(ap); break; case ATA_PROT_ATAPI_DMA: ap->flags |= ATA_FLAG_NOINTR; ap->ops->tf_load(ap, &qc->tf); /* load tf registers */ ap->ops->bmdma_setup(qc); /* set up bmdma */ - queue_work(ata_wq, &ap->packet_task); + ata_queue_packet_task(ap); break; default: @@ -4187,7 +4205,7 @@ static void atapi_packet_task(void *_data) /* PIO commands are handled by polling */ ap->hsm_task_state = HSM_ST; - queue_work(ata_wq, &ap->pio_task); + ata_queue_pio_task(ap); } return; -- cgit v1.2.1 From e0bfd149973d22a4330dd6665b54d1dcca07174a Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Mon, 23 Jan 2006 16:31:53 +0900 Subject: [PATCH] ahci: stop engine during hard reset AHCI spec mandates engine to be stopped during hard resets. Signed-off-by: Tejun Heo Signed-off-by: Jeff Garzik --- drivers/scsi/ahci.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'drivers/scsi') diff --git a/drivers/scsi/ahci.c b/drivers/scsi/ahci.c index 5a6b23009897..2abc0aca5a8d 100644 --- a/drivers/scsi/ahci.c +++ b/drivers/scsi/ahci.c @@ -504,7 +504,9 @@ static void ahci_phy_reset(struct ata_port *ap) struct ata_device *dev = &ap->device[0]; u32 new_tmp, tmp; + ahci_stop_engine(ap); __sata_phy_reset(ap); + ahci_start_engine(ap); if (ap->flags & ATA_FLAG_PORT_DISABLED) return; -- cgit v1.2.1 From 22b49985f526796471c074c0e56bcebfd633a6ff Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Mon, 23 Jan 2006 21:38:44 +0900 Subject: [PATCH] ahci: add constants for SRST Add constants needed to perform SRST. This is preparation for adding softreset method. Signed-off-by: Tejun Heo Signed-off-by: Jeff Garzik --- drivers/scsi/ahci.c | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'drivers/scsi') diff --git a/drivers/scsi/ahci.c b/drivers/scsi/ahci.c index 2abc0aca5a8d..5caf6dec1d40 100644 --- a/drivers/scsi/ahci.c +++ b/drivers/scsi/ahci.c @@ -66,6 +66,8 @@ enum { AHCI_IRQ_ON_SG = (1 << 31), AHCI_CMD_ATAPI = (1 << 5), AHCI_CMD_WRITE = (1 << 6), + AHCI_CMD_RESET = (1 << 8), + AHCI_CMD_CLR_BUSY = (1 << 10), RX_FIS_D2H_REG = 0x40, /* offset of D2H Register FIS data */ @@ -85,6 +87,7 @@ enum { /* HOST_CAP bits */ HOST_CAP_64 = (1 << 31), /* PCI DAC (64-bit DMA) support */ + HOST_CAP_CLO = (1 << 24), /* Command List Override support */ /* registers for each SATA port */ PORT_LST_ADDR = 0x00, /* command list DMA addr */ @@ -138,6 +141,7 @@ enum { PORT_CMD_LIST_ON = (1 << 15), /* cmd list DMA engine running */ PORT_CMD_FIS_ON = (1 << 14), /* FIS DMA engine running */ PORT_CMD_FIS_RX = (1 << 4), /* Enable FIS receive DMA engine */ + PORT_CMD_CLO = (1 << 3), /* Command list override */ PORT_CMD_POWER_ON = (1 << 2), /* Power up device */ PORT_CMD_SPIN_UP = (1 << 1), /* Spin up device */ PORT_CMD_START = (1 << 0), /* Enable port DMA engine */ -- cgit v1.2.1 From 6f8b99589524f3e759e44721376abcdf88ed8915 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Tue, 24 Jan 2006 17:05:21 +0900 Subject: [PATCH] libata: export ata_busy_sleep Export ata_busy_sleep(), to be used by low level driver reset functions. Signed-off-by: Tejun Heo Signed-off-by: Jeff Garzik --- drivers/scsi/libata-core.c | 9 +++------ 1 file changed, 3 insertions(+), 6 deletions(-) (limited to 'drivers/scsi') diff --git a/drivers/scsi/libata-core.c b/drivers/scsi/libata-core.c index 71de697e2327..4336fc889acd 100644 --- a/drivers/scsi/libata-core.c +++ b/drivers/scsi/libata-core.c @@ -61,9 +61,6 @@ #include "libata.h" -static unsigned int ata_busy_sleep (struct ata_port *ap, - unsigned long tmout_pat, - unsigned long tmout); static void ata_dev_reread_id(struct ata_port *ap, struct ata_device *dev); static void ata_dev_init_params(struct ata_port *ap, struct ata_device *dev); static void ata_set_mode(struct ata_port *ap); @@ -1960,9 +1957,8 @@ err_out: * */ -static unsigned int ata_busy_sleep (struct ata_port *ap, - unsigned long tmout_pat, - unsigned long tmout) +unsigned int ata_busy_sleep (struct ata_port *ap, + unsigned long tmout_pat, unsigned long tmout) { unsigned long timer_start, timeout; u8 status; @@ -5167,6 +5163,7 @@ EXPORT_SYMBOL_GPL(__sata_phy_reset); EXPORT_SYMBOL_GPL(ata_bus_reset); EXPORT_SYMBOL_GPL(ata_port_disable); EXPORT_SYMBOL_GPL(ata_ratelimit); +EXPORT_SYMBOL_GPL(ata_busy_sleep); EXPORT_SYMBOL_GPL(ata_scsi_ioctl); EXPORT_SYMBOL_GPL(ata_scsi_queuecmd); EXPORT_SYMBOL_GPL(ata_scsi_error); -- cgit v1.2.1 From b4dc7623c1bb258b66418261dab40f0e4cfc6d42 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Tue, 24 Jan 2006 17:05:22 +0900 Subject: [PATCH] libata: modify ata_dev_try_classify Make ata_dev_try_classify take @r_err to store tf error register value on completion and return device class instead of directly manipulating dev->class. This is preparation for new reset mechanism. Signed-off-by: Tejun Heo Signed-off-by: Jeff Garzik --- drivers/scsi/libata-core.c | 30 ++++++++++++++++-------------- 1 file changed, 16 insertions(+), 14 deletions(-) (limited to 'drivers/scsi') diff --git a/drivers/scsi/libata-core.c b/drivers/scsi/libata-core.c index 4336fc889acd..1f78e246f5e0 100644 --- a/drivers/scsi/libata-core.c +++ b/drivers/scsi/libata-core.c @@ -830,6 +830,7 @@ unsigned int ata_dev_classify(const struct ata_taskfile *tf) * ata_dev_try_classify - Parse returned ATA device signature * @ap: ATA channel to examine * @device: Device to examine (starting at zero) + * @r_err: Value of error register on completion * * After an event -- SRST, E.D.D., or SATA COMRESET -- occurs, * an ATA/ATAPI-defined set of values is placed in the ATA @@ -842,11 +843,14 @@ unsigned int ata_dev_classify(const struct ata_taskfile *tf) * * LOCKING: * caller. + * + * RETURNS: + * Device type - %ATA_DEV_ATA, %ATA_DEV_ATAPI or %ATA_DEV_NONE. */ -static u8 ata_dev_try_classify(struct ata_port *ap, unsigned int device) +static unsigned int +ata_dev_try_classify(struct ata_port *ap, unsigned int device, u8 *r_err) { - struct ata_device *dev = &ap->device[device]; struct ata_taskfile tf; unsigned int class; u8 err; @@ -857,8 +861,8 @@ static u8 ata_dev_try_classify(struct ata_port *ap, unsigned int device) ap->ops->tf_read(ap, &tf); err = tf.feature; - - dev->class = ATA_DEV_NONE; + if (r_err) + *r_err = err; /* see if device passed diags */ if (err == 1) @@ -866,18 +870,16 @@ static u8 ata_dev_try_classify(struct ata_port *ap, unsigned int device) else if ((device == 0) && (err == 0x81)) /* do nothing */ ; else - return err; + return ATA_DEV_NONE; - /* determine if device if ATA or ATAPI */ + /* determine if device is ATA or ATAPI */ class = ata_dev_classify(&tf); + if (class == ATA_DEV_UNKNOWN) - return err; + return ATA_DEV_NONE; if ((class == ATA_DEV_ATA) && (ata_chk_status(ap) == 0)) - return err; - - dev->class = class; - - return err; + return ATA_DEV_NONE; + return class; } /** @@ -2177,9 +2179,9 @@ void ata_bus_reset(struct ata_port *ap) /* * determine by signature whether we have ATA or ATAPI devices */ - err = ata_dev_try_classify(ap, 0); + ap->device[0].class = ata_dev_try_classify(ap, 0, &err); if ((slave_possible) && (err != 0x81)) - ata_dev_try_classify(ap, 1); + ap->device[1].class = ata_dev_try_classify(ap, 1, &err); /* re-enable interrupts */ if (ap->ioaddr.ctl_addr) /* FIXME: hack. create a hook instead */ -- cgit v1.2.1 From c19ba8af4f104cca28d548cac55c128b28dd31fb Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Tue, 24 Jan 2006 17:05:22 +0900 Subject: [PATCH] libata: new ->probe_reset operation Add new ->probe_reset operation to ata_port_operations obsoleting ->phy_reset. The main difference from ->phy_reset is that the new operation is not allowed to manipulate libata internals directly. It's not allowed to configure or disable the port or devices. It can only succeed or fail and classify attached devices into passed @classes. This change gives more control to higher level and eases sharing reset methods with EH. Signed-off-by: Tejun Heo Signed-off-by: Jeff Garzik --- drivers/scsi/libata-core.c | 19 ++++++++++++++++++- 1 file changed, 18 insertions(+), 1 deletion(-) (limited to 'drivers/scsi') diff --git a/drivers/scsi/libata-core.c b/drivers/scsi/libata-core.c index 1f78e246f5e0..147e1461062d 100644 --- a/drivers/scsi/libata-core.c +++ b/drivers/scsi/libata-core.c @@ -1485,7 +1485,24 @@ static int ata_bus_probe(struct ata_port *ap) { unsigned int i, found = 0; - ap->ops->phy_reset(ap); + if (ap->ops->probe_reset) { + unsigned int classes[ATA_MAX_DEVICES]; + int rc; + + ata_port_probe(ap); + + rc = ap->ops->probe_reset(ap, classes); + if (rc == 0) { + for (i = 0; i < ATA_MAX_DEVICES; i++) + ap->device[i].class = classes[i]; + } else { + printk(KERN_ERR "ata%u: probe reset failed, " + "disabling port\n", ap->id); + ata_port_disable(ap); + } + } else + ap->ops->phy_reset(ap); + if (ap->flags & ATA_FLAG_PORT_DISABLED) goto err_out; -- cgit v1.2.1 From a62c0fc526c344d8163f7a9e45e68cc63826ffd3 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Tue, 24 Jan 2006 17:05:22 +0900 Subject: [PATCH] libata: implement ata_drive_probe_reset() Most low level drivers share supported reset/classify actions and sequence. This patch implements ata_drive_probe_reset() which helps constructing ->probe_reset from three component operations - softreset, hardreset and postreset. This minimizes duplicate code and yet allows flexibility if needed. The three component operations can also be shared by EH later. Signed-off-by: Tejun Heo Signed-off-by: Jeff Garzik --- drivers/scsi/libata-core.c | 89 ++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 89 insertions(+) (limited to 'drivers/scsi') diff --git a/drivers/scsi/libata-core.c b/drivers/scsi/libata-core.c index 147e1461062d..cf91fdc08ef6 100644 --- a/drivers/scsi/libata-core.c +++ b/drivers/scsi/libata-core.c @@ -2233,6 +2233,94 @@ err_out: DPRINTK("EXIT\n"); } +static int do_probe_reset(struct ata_port *ap, ata_reset_fn_t reset, + ata_postreset_fn_t postreset, + unsigned int *classes) +{ + int i, rc; + + for (i = 0; i < ATA_MAX_DEVICES; i++) + classes[i] = ATA_DEV_UNKNOWN; + + rc = reset(ap, 0, classes); + if (rc) + return rc; + + /* If any class isn't ATA_DEV_UNKNOWN, consider classification + * is complete and convert all ATA_DEV_UNKNOWN to + * ATA_DEV_NONE. + */ + for (i = 0; i < ATA_MAX_DEVICES; i++) + if (classes[i] != ATA_DEV_UNKNOWN) + break; + + if (i < ATA_MAX_DEVICES) + for (i = 0; i < ATA_MAX_DEVICES; i++) + if (classes[i] == ATA_DEV_UNKNOWN) + classes[i] = ATA_DEV_NONE; + + if (postreset) + postreset(ap, classes); + + return classes[0] != ATA_DEV_UNKNOWN ? 0 : -ENODEV; +} + +/** + * ata_drive_probe_reset - Perform probe reset with given methods + * @ap: port to reset + * @softreset: softreset method (can be NULL) + * @hardreset: hardreset method (can be NULL) + * @postreset: postreset method (can be NULL) + * @classes: resulting classes of attached devices + * + * Reset the specified port and classify attached devices using + * given methods. This function prefers softreset but tries all + * possible reset sequences to reset and classify devices. This + * function is intended to be used for constructing ->probe_reset + * callback by low level drivers. + * + * Reset methods should follow the following rules. + * + * - Return 0 on sucess, -errno on failure. + * - If classification is supported, fill classes[] with + * recognized class codes. + * - If classification is not supported, leave classes[] alone. + * - If verbose is non-zero, print error message on failure; + * otherwise, shut up. + * + * LOCKING: + * Kernel thread context (may sleep) + * + * RETURNS: + * 0 on success, -EINVAL if no reset method is avaliable, -ENODEV + * if classification fails, and any error code from reset + * methods. + */ +int ata_drive_probe_reset(struct ata_port *ap, + ata_reset_fn_t softreset, ata_reset_fn_t hardreset, + ata_postreset_fn_t postreset, unsigned int *classes) +{ + int rc = -EINVAL; + + if (softreset) { + rc = do_probe_reset(ap, softreset, postreset, classes); + if (rc == 0) + return 0; + } + + if (!hardreset) + return rc; + + rc = do_probe_reset(ap, hardreset, postreset, classes); + if (rc == 0 || rc != -ENODEV) + return rc; + + if (softreset) + rc = do_probe_reset(ap, softreset, postreset, classes); + + return rc; +} + static void ata_pr_blacklisted(const struct ata_port *ap, const struct ata_device *dev) { @@ -5180,6 +5268,7 @@ EXPORT_SYMBOL_GPL(ata_port_probe); EXPORT_SYMBOL_GPL(sata_phy_reset); EXPORT_SYMBOL_GPL(__sata_phy_reset); EXPORT_SYMBOL_GPL(ata_bus_reset); +EXPORT_SYMBOL_GPL(ata_drive_probe_reset); EXPORT_SYMBOL_GPL(ata_port_disable); EXPORT_SYMBOL_GPL(ata_ratelimit); EXPORT_SYMBOL_GPL(ata_busy_sleep); -- cgit v1.2.1 From c2bd58047b9b5c91a3b0a851de66a877f2eb7ae3 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Tue, 24 Jan 2006 17:05:22 +0900 Subject: [PATCH] libata: implement standard reset component operations and ->probe_reset Implement SRST, COMRESET and standard postreset component operations for ata_drive_probe_reset(), and use these three functions to implement ata_std_probe_reset. Signed-off-by: Tejun Heo Signed-off-by: Jeff Garzik --- drivers/scsi/libata-core.c | 206 +++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 206 insertions(+) (limited to 'drivers/scsi') diff --git a/drivers/scsi/libata-core.c b/drivers/scsi/libata-core.c index cf91fdc08ef6..b369dbd7cb23 100644 --- a/drivers/scsi/libata-core.c +++ b/drivers/scsi/libata-core.c @@ -2233,6 +2233,208 @@ err_out: DPRINTK("EXIT\n"); } +/** + * ata_std_softreset - reset host port via ATA SRST + * @ap: port to reset + * @verbose: fail verbosely + * @classes: resulting classes of attached devices + * + * Reset host port using ATA SRST. This function is to be used + * as standard callback for ata_drive_*_reset() functions. + * + * LOCKING: + * Kernel thread context (may sleep) + * + * RETURNS: + * 0 on success, -errno otherwise. + */ +int ata_std_softreset(struct ata_port *ap, int verbose, unsigned int *classes) +{ + unsigned int slave_possible = ap->flags & ATA_FLAG_SLAVE_POSS; + unsigned int devmask = 0, err_mask; + u8 err; + + DPRINTK("ENTER\n"); + + /* determine if device 0/1 are present */ + if (ata_devchk(ap, 0)) + devmask |= (1 << 0); + if (slave_possible && ata_devchk(ap, 1)) + devmask |= (1 << 1); + + /* devchk reports device presence without actual device on + * most SATA controllers. Check SStatus and turn devmask off + * if link is offline. Note that we should continue resetting + * even when it seems like there's no device. + */ + if (ap->ops->scr_read && !sata_dev_present(ap)) + devmask = 0; + + /* select device 0 again */ + ap->ops->dev_select(ap, 0); + + /* issue bus reset */ + DPRINTK("about to softreset, devmask=%x\n", devmask); + err_mask = ata_bus_softreset(ap, devmask); + if (err_mask) { + if (verbose) + printk(KERN_ERR "ata%u: SRST failed (err_mask=0x%x)\n", + ap->id, err_mask); + else + DPRINTK("EXIT, softreset failed (err_mask=0x%x)\n", + err_mask); + return -EIO; + } + + /* determine by signature whether we have ATA or ATAPI devices */ + classes[0] = ata_dev_try_classify(ap, 0, &err); + if (slave_possible && err != 0x81) + classes[1] = ata_dev_try_classify(ap, 1, &err); + + DPRINTK("EXIT, classes[0]=%u [1]=%u\n", classes[0], classes[1]); + return 0; +} + +/** + * sata_std_hardreset - reset host port via SATA phy reset + * @ap: port to reset + * @verbose: fail verbosely + * @class: resulting class of attached device + * + * SATA phy-reset host port using DET bits of SControl register. + * This function is to be used as standard callback for + * ata_drive_*_reset(). + * + * LOCKING: + * Kernel thread context (may sleep) + * + * RETURNS: + * 0 on success, -errno otherwise. + */ +int sata_std_hardreset(struct ata_port *ap, int verbose, unsigned int *class) +{ + u32 sstatus, serror; + unsigned long timeout = jiffies + (HZ * 5); + + DPRINTK("ENTER\n"); + + /* Issue phy wake/reset */ + scr_write_flush(ap, SCR_CONTROL, 0x301); + + /* + * Couldn't find anything in SATA I/II specs, but AHCI-1.1 + * 10.4.2 says at least 1 ms. + */ + msleep(1); + + scr_write_flush(ap, SCR_CONTROL, 0x300); + + /* Wait for phy to become ready, if necessary. */ + do { + msleep(200); + sstatus = scr_read(ap, SCR_STATUS); + if ((sstatus & 0xf) != 1) + break; + } while (time_before(jiffies, timeout)); + + /* Clear SError */ + serror = scr_read(ap, SCR_ERROR); + scr_write(ap, SCR_ERROR, serror); + + /* TODO: phy layer with polling, timeouts, etc. */ + if (!sata_dev_present(ap)) { + *class = ATA_DEV_NONE; + DPRINTK("EXIT, link offline\n"); + return 0; + } + + if (ata_busy_sleep(ap, ATA_TMOUT_BOOT_QUICK, ATA_TMOUT_BOOT)) { + if (verbose) + printk(KERN_ERR "ata%u: COMRESET failed " + "(device not ready)\n", ap->id); + else + DPRINTK("EXIT, device not ready\n"); + return -EIO; + } + + *class = ata_dev_try_classify(ap, 0, NULL); + + DPRINTK("EXIT, class=%u\n", *class); + return 0; +} + +/** + * ata_std_postreset - standard postreset callback + * @ap: the target ata_port + * @classes: classes of attached devices + * + * This function is invoked after a successful reset. Note that + * the device might have been reset more than once using + * different reset methods before postreset is invoked. + * postreset is also reponsible for setting cable type. + * + * This function is to be used as standard callback for + * ata_drive_*_reset(). + * + * LOCKING: + * Kernel thread context (may sleep) + */ +void ata_std_postreset(struct ata_port *ap, unsigned int *classes) +{ + DPRINTK("ENTER\n"); + + /* set cable type */ + if (ap->cbl == ATA_CBL_NONE && ap->flags & ATA_FLAG_SATA) + ap->cbl = ATA_CBL_SATA; + + /* print link status */ + if (ap->cbl == ATA_CBL_SATA) + sata_print_link_status(ap); + + /* bail out if no device is present */ + if (classes[0] == ATA_DEV_NONE && classes[1] == ATA_DEV_NONE) { + DPRINTK("EXIT, no device\n"); + return; + } + + /* is double-select really necessary? */ + if (classes[0] != ATA_DEV_NONE) + ap->ops->dev_select(ap, 1); + if (classes[1] != ATA_DEV_NONE) + ap->ops->dev_select(ap, 0); + + /* re-enable interrupts & set up device control */ + if (ap->ioaddr.ctl_addr) /* FIXME: hack. create a hook instead */ + ata_irq_on(ap); + + DPRINTK("EXIT\n"); +} + +/** + * ata_std_probe_reset - standard probe reset method + * @ap: prot to perform probe-reset + * @classes: resulting classes of attached devices + * + * The stock off-the-shelf ->probe_reset method. + * + * LOCKING: + * Kernel thread context (may sleep) + * + * RETURNS: + * 0 on success, -errno otherwise. + */ +int ata_std_probe_reset(struct ata_port *ap, unsigned int *classes) +{ + ata_reset_fn_t hardreset; + + hardreset = NULL; + if (ap->cbl == ATA_CBL_SATA && ap->ops->scr_read) + hardreset = sata_std_hardreset; + + return ata_drive_probe_reset(ap, ata_std_softreset, hardreset, + ata_std_postreset, classes); +} + static int do_probe_reset(struct ata_port *ap, ata_reset_fn_t reset, ata_postreset_fn_t postreset, unsigned int *classes) @@ -5268,6 +5470,10 @@ EXPORT_SYMBOL_GPL(ata_port_probe); EXPORT_SYMBOL_GPL(sata_phy_reset); EXPORT_SYMBOL_GPL(__sata_phy_reset); EXPORT_SYMBOL_GPL(ata_bus_reset); +EXPORT_SYMBOL_GPL(ata_std_softreset); +EXPORT_SYMBOL_GPL(sata_std_hardreset); +EXPORT_SYMBOL_GPL(ata_std_postreset); +EXPORT_SYMBOL_GPL(ata_std_probe_reset); EXPORT_SYMBOL_GPL(ata_drive_probe_reset); EXPORT_SYMBOL_GPL(ata_port_disable); EXPORT_SYMBOL_GPL(ata_ratelimit); -- cgit v1.2.1 From b376bc1f6b4258112d714fb4ee8e5d57b53625f2 Mon Sep 17 00:00:00 2001 From: Jeff Garzik Date: Sat, 28 Jan 2006 12:26:23 -0500 Subject: [libata ata_piix] Fix ICH6/7 map value interpretation The previous change failed to properly mask out unrelated bits, which resulted in a failure to detect devices. --- drivers/scsi/ata_piix.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/scsi') diff --git a/drivers/scsi/ata_piix.c b/drivers/scsi/ata_piix.c index 19d8d4ba6a1e..2d984b090b23 100644 --- a/drivers/scsi/ata_piix.c +++ b/drivers/scsi/ata_piix.c @@ -713,7 +713,7 @@ static int piix_init_one (struct pci_dev *pdev, const struct pci_device_id *ent) pci_read_config_byte(pdev, ICH5_PMR, &tmp); if (host_flags & PIIX_FLAG_COMBINED_ICH6) { - switch (tmp) { + switch (tmp & 0x3) { case 0: break; case 1: -- cgit v1.2.1 From 6340f019695a08e3b2e317e307014801fc86b178 Mon Sep 17 00:00:00 2001 From: Luke Kosewski Date: Sat, 28 Jan 2006 12:39:29 -0500 Subject: [libata sata_promise] add correct read/write of hotplug registers for SATAII devices This patch adds support for correctly masking out and knowing about hotplug events on Promise SATAII150 Tx4/Tx2 Plus controllers. Also, a kmalloc->kzalloc cleanup. Signed-off-by: Luke Kosewski Signed-off-by: Jeff Garzik --- drivers/scsi/sata_promise.c | 104 ++++++++++++++++++++++++++++++++++---------- 1 file changed, 82 insertions(+), 22 deletions(-) (limited to 'drivers/scsi') diff --git a/drivers/scsi/sata_promise.c b/drivers/scsi/sata_promise.c index 77ef646b0f92..0950a8e45814 100644 --- a/drivers/scsi/sata_promise.c +++ b/drivers/scsi/sata_promise.c @@ -46,7 +46,7 @@ #include "sata_promise.h" #define DRV_NAME "sata_promise" -#define DRV_VERSION "1.03" +#define DRV_VERSION "1.04" enum { @@ -58,6 +58,7 @@ enum { PDC_GLOBAL_CTL = 0x48, /* Global control/status (per port) */ PDC_CTLSTAT = 0x60, /* IDE control and status (per port) */ PDC_SATA_PLUG_CSR = 0x6C, /* SATA Plug control/status reg */ + PDC2_SATA_PLUG_CSR = 0x60, /* SATAII Plug control/status reg */ PDC_SLEW_CTL = 0x470, /* slew rate control reg */ PDC_ERR_MASK = (1<<19) | (1<<20) | (1<<21) | (1<<22) | @@ -67,8 +68,10 @@ enum { board_20319 = 1, /* FastTrak S150 TX4 */ board_20619 = 2, /* FastTrak TX4000 */ board_20771 = 3, /* FastTrak TX2300 */ + board_2057x = 4, /* SATAII150 Tx2plus */ + board_40518 = 5, /* SATAII150 Tx4 */ - PDC_HAS_PATA = (1 << 1), /* PDC20375 has PATA */ + PDC_HAS_PATA = (1 << 1), /* PDC20375/20575 has PATA */ PDC_RESET = (1 << 11), /* HDMA reset */ @@ -82,6 +85,10 @@ struct pdc_port_priv { dma_addr_t pkt_dma; }; +struct pdc_host_priv { + int hotplug_offset; +}; + static u32 pdc_sata_scr_read (struct ata_port *ap, unsigned int sc_reg); static void pdc_sata_scr_write (struct ata_port *ap, unsigned int sc_reg, u32 val); static int pdc_ata_init_one (struct pci_dev *pdev, const struct pci_device_id *ent); @@ -96,6 +103,7 @@ static void pdc_tf_load_mmio(struct ata_port *ap, const struct ata_taskfile *tf) static void pdc_exec_command_mmio(struct ata_port *ap, const struct ata_taskfile *tf); static void pdc_irq_clear(struct ata_port *ap); static unsigned int pdc_qc_issue_prot(struct ata_queued_cmd *qc); +static void pdc_host_stop(struct ata_host_set *host_set); static struct scsi_host_template pdc_ata_sht = { @@ -137,7 +145,7 @@ static const struct ata_port_operations pdc_sata_ops = { .scr_write = pdc_sata_scr_write, .port_start = pdc_port_start, .port_stop = pdc_port_stop, - .host_stop = ata_pci_host_stop, + .host_stop = pdc_host_stop, }; static const struct ata_port_operations pdc_pata_ops = { @@ -158,7 +166,7 @@ static const struct ata_port_operations pdc_pata_ops = { .port_start = pdc_port_start, .port_stop = pdc_port_stop, - .host_stop = ata_pci_host_stop, + .host_stop = pdc_host_stop, }; static const struct ata_port_info pdc_port_info[] = { @@ -201,6 +209,26 @@ static const struct ata_port_info pdc_port_info[] = { .udma_mask = 0x7f, /* udma0-6 ; FIXME */ .port_ops = &pdc_sata_ops, }, + + /* board_2057x */ + { + .sht = &pdc_ata_sht, + .host_flags = PDC_COMMON_FLAGS | ATA_FLAG_SATA, + .pio_mask = 0x1f, /* pio0-4 */ + .mwdma_mask = 0x07, /* mwdma0-2 */ + .udma_mask = 0x7f, /* udma0-6 ; FIXME */ + .port_ops = &pdc_sata_ops, + }, + + /* board_40518 */ + { + .sht = &pdc_ata_sht, + .host_flags = PDC_COMMON_FLAGS | ATA_FLAG_SATA, + .pio_mask = 0x1f, /* pio0-4 */ + .mwdma_mask = 0x07, /* mwdma0-2 */ + .udma_mask = 0x7f, /* udma0-6 ; FIXME */ + .port_ops = &pdc_sata_ops, + }, }; static const struct pci_device_id pdc_ata_pci_tbl[] = { @@ -217,9 +245,9 @@ static const struct pci_device_id pdc_ata_pci_tbl[] = { { PCI_VENDOR_ID_PROMISE, 0x3376, PCI_ANY_ID, PCI_ANY_ID, 0, 0, board_2037x }, { PCI_VENDOR_ID_PROMISE, 0x3574, PCI_ANY_ID, PCI_ANY_ID, 0, 0, - board_2037x }, + board_2057x }, { PCI_VENDOR_ID_PROMISE, 0x3d75, PCI_ANY_ID, PCI_ANY_ID, 0, 0, - board_2037x }, + board_2057x }, { PCI_VENDOR_ID_PROMISE, 0x3d73, PCI_ANY_ID, PCI_ANY_ID, 0, 0, board_2037x }, @@ -232,7 +260,7 @@ static const struct pci_device_id pdc_ata_pci_tbl[] = { { PCI_VENDOR_ID_PROMISE, 0x3d17, PCI_ANY_ID, PCI_ANY_ID, 0, 0, board_20319 }, { PCI_VENDOR_ID_PROMISE, 0x3d18, PCI_ANY_ID, PCI_ANY_ID, 0, 0, - board_20319 }, + board_40518 }, { PCI_VENDOR_ID_PROMISE, 0x6629, PCI_ANY_ID, PCI_ANY_ID, 0, 0, board_20619 }, @@ -261,12 +289,11 @@ static int pdc_port_start(struct ata_port *ap) if (rc) return rc; - pp = kmalloc(sizeof(*pp), GFP_KERNEL); + pp = kzalloc(sizeof(*pp), GFP_KERNEL); if (!pp) { rc = -ENOMEM; goto err_out; } - memset(pp, 0, sizeof(*pp)); pp->pkt = dma_alloc_coherent(dev, 128, &pp->pkt_dma, GFP_KERNEL); if (!pp->pkt) { @@ -298,6 +325,16 @@ static void pdc_port_stop(struct ata_port *ap) } +static void pdc_host_stop(struct ata_host_set *host_set) +{ + struct pdc_host_priv *hp = host_set->private_data; + + ata_pci_host_stop(host_set); + + kfree(hp); +} + + static void pdc_reset_port(struct ata_port *ap) { void __iomem *mmio = (void __iomem *) ap->ioaddr.cmd_addr + PDC_CTLSTAT; @@ -487,14 +524,15 @@ static irqreturn_t pdc_interrupt (int irq, void *dev_instance, struct pt_regs *r VPRINTK("QUICK EXIT 2\n"); return IRQ_NONE; } + + spin_lock(&host_set->lock); + mask &= 0xffff; /* only 16 tags possible */ if (!mask) { VPRINTK("QUICK EXIT 3\n"); - return IRQ_NONE; + goto done_irq; } - spin_lock(&host_set->lock); - writel(mask, mmio_base + PDC_INT_SEQMASK); for (i = 0; i < host_set->n_ports; i++) { @@ -511,10 +549,10 @@ static irqreturn_t pdc_interrupt (int irq, void *dev_instance, struct pt_regs *r } } - spin_unlock(&host_set->lock); - VPRINTK("EXIT\n"); +done_irq: + spin_unlock(&host_set->lock); return IRQ_RETVAL(handled); } @@ -592,6 +630,8 @@ static void pdc_ata_setup_port(struct ata_ioports *port, unsigned long base) static void pdc_host_init(unsigned int chip_id, struct ata_probe_ent *pe) { void __iomem *mmio = pe->mmio_base; + struct pdc_host_priv *hp = pe->private_data; + int hotplug_offset = hp->hotplug_offset; u32 tmp; /* @@ -606,12 +646,12 @@ static void pdc_host_init(unsigned int chip_id, struct ata_probe_ent *pe) writel(tmp, mmio + PDC_FLASH_CTL); /* clear plug/unplug flags for all ports */ - tmp = readl(mmio + PDC_SATA_PLUG_CSR); - writel(tmp | 0xff, mmio + PDC_SATA_PLUG_CSR); + tmp = readl(mmio + hotplug_offset); + writel(tmp | 0xff, mmio + hotplug_offset); /* mask plug/unplug ints */ - tmp = readl(mmio + PDC_SATA_PLUG_CSR); - writel(tmp | 0xff0000, mmio + PDC_SATA_PLUG_CSR); + tmp = readl(mmio + hotplug_offset); + writel(tmp | 0xff0000, mmio + hotplug_offset); /* reduce TBG clock to 133 Mhz. */ tmp = readl(mmio + PDC_TBG_MODE); @@ -633,6 +673,7 @@ static int pdc_ata_init_one (struct pci_dev *pdev, const struct pci_device_id *e { static int printed_version; struct ata_probe_ent *probe_ent = NULL; + struct pdc_host_priv *hp; unsigned long base; void __iomem *mmio_base; unsigned int board_idx = (unsigned int) ent->driver_data; @@ -663,13 +704,12 @@ static int pdc_ata_init_one (struct pci_dev *pdev, const struct pci_device_id *e if (rc) goto err_out_regions; - probe_ent = kmalloc(sizeof(*probe_ent), GFP_KERNEL); + probe_ent = kzalloc(sizeof(*probe_ent), GFP_KERNEL); if (probe_ent == NULL) { rc = -ENOMEM; goto err_out_regions; } - memset(probe_ent, 0, sizeof(*probe_ent)); probe_ent->dev = pci_dev_to_dev(pdev); INIT_LIST_HEAD(&probe_ent->node); @@ -680,6 +720,16 @@ static int pdc_ata_init_one (struct pci_dev *pdev, const struct pci_device_id *e } base = (unsigned long) mmio_base; + hp = kzalloc(sizeof(*hp), GFP_KERNEL); + if (hp == NULL) { + rc = -ENOMEM; + goto err_out_free_ent; + } + + /* Set default hotplug offset */ + hp->hotplug_offset = PDC_SATA_PLUG_CSR; + probe_ent->private_data = hp; + probe_ent->sht = pdc_port_info[board_idx].sht; probe_ent->host_flags = pdc_port_info[board_idx].host_flags; probe_ent->pio_mask = pdc_port_info[board_idx].pio_mask; @@ -699,6 +749,10 @@ static int pdc_ata_init_one (struct pci_dev *pdev, const struct pci_device_id *e /* notice 4-port boards */ switch (board_idx) { + case board_40518: + /* Override hotplug offset for SATAII150 */ + hp->hotplug_offset = PDC2_SATA_PLUG_CSR; + /* Fall through */ case board_20319: probe_ent->n_ports = 4; @@ -708,6 +762,10 @@ static int pdc_ata_init_one (struct pci_dev *pdev, const struct pci_device_id *e probe_ent->port[2].scr_addr = base + 0x600; probe_ent->port[3].scr_addr = base + 0x700; break; + case board_2057x: + /* Override hotplug offset for SATAII150 */ + hp->hotplug_offset = PDC2_SATA_PLUG_CSR; + /* Fall through */ case board_2037x: probe_ent->n_ports = 2; break; @@ -733,8 +791,10 @@ static int pdc_ata_init_one (struct pci_dev *pdev, const struct pci_device_id *e /* initialize adapter */ pdc_host_init(board_idx, probe_ent); - /* FIXME: check ata_device_add return value */ - ata_device_add(probe_ent); + /* FIXME: Need any other frees than hp? */ + if (!ata_device_add(probe_ent)) + kfree(hp); + kfree(probe_ent); return 0; -- cgit v1.2.1 From c893a3ae49279a4ab6aa6cf594a2ec6d286e1187 Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Sat, 28 Jan 2006 13:15:32 -0500 Subject: Various libata documentation updates. This is a merger of libata docs + cleanups from Martin Waitz and me. From: Randy Dunlap From: Martin Waitz Fix libata kernel-doc comments to match code. Add some function parameters to kernel-doc. Fix some typos/spellos. Put comments in <= 80 columns. Make one DPRINTK string unique. Fix sparse cast warnings. Signed-off-by: Randy Dunlap Signed-off-by: Jeff Garzik --- drivers/scsi/ata_piix.c | 1 + drivers/scsi/libata-core.c | 60 +++++++++++++++++++++++----------------------- drivers/scsi/libata-scsi.c | 9 +++---- 3 files changed, 36 insertions(+), 34 deletions(-) (limited to 'drivers/scsi') diff --git a/drivers/scsi/ata_piix.c b/drivers/scsi/ata_piix.c index 2d984b090b23..49cc4209fe16 100644 --- a/drivers/scsi/ata_piix.c +++ b/drivers/scsi/ata_piix.c @@ -630,6 +630,7 @@ static int piix_disable_ahci(struct pci_dev *pdev) /** * piix_check_450nx_errata - Check for problem 450NX setup + * @ata_dev: the PCI device to check * * Check for the present of 450NX errata #19 and errata #25. If * they are found return an error code so we can turn off DMA diff --git a/drivers/scsi/libata-core.c b/drivers/scsi/libata-core.c index b369dbd7cb23..249e67fab81f 100644 --- a/drivers/scsi/libata-core.c +++ b/drivers/scsi/libata-core.c @@ -1442,12 +1442,11 @@ static inline u8 ata_dev_knobble(const struct ata_port *ap) } /** - * ata_dev_config - Run device specific handlers and check for - * SATA->PATA bridges - * @ap: Bus - * @i: Device + * ata_dev_config - Run device specific handlers & check for SATA->PATA bridges + * @ap: Bus + * @i: Device * - * LOCKING: + * LOCKING: */ void ata_dev_config(struct ata_port *ap, unsigned int i) @@ -1794,9 +1793,9 @@ int ata_timing_compute(struct ata_device *adev, unsigned short speed, ata_timing_quantize(t, t, T, UT); /* - * Even in DMA/UDMA modes we still use PIO access for IDENTIFY, S.M.A.R.T - * and some other commands. We have to ensure that the DMA cycle timing is - * slower/equal than the fastest PIO timing. + * Even in DMA/UDMA modes we still use PIO access for IDENTIFY, + * S.M.A.R.T * and some other commands. We have to ensure that the + * DMA cycle timing is slower/equal than the fastest PIO timing. */ if (speed > XFER_PIO_4) { @@ -1805,7 +1804,7 @@ int ata_timing_compute(struct ata_device *adev, unsigned short speed, } /* - * Lenghten active & recovery time so that cycle time is correct. + * Lengthen active & recovery time so that cycle time is correct. */ if (t->act8b + t->rec8b < t->cyc8b) { @@ -1924,7 +1923,6 @@ static void ata_host_set_dma(struct ata_port *ap, u8 xfer_mode, * * LOCKING: * PCI/etc. bus probe sem. - * */ static void ata_set_mode(struct ata_port *ap) { @@ -1973,7 +1971,6 @@ err_out: * or a timeout occurs. * * LOCKING: None. - * */ unsigned int ata_busy_sleep (struct ata_port *ap, @@ -3200,7 +3197,7 @@ void ata_poll_qc_complete(struct ata_queued_cmd *qc) } /** - * ata_pio_poll - + * ata_pio_poll - poll using PIO, depending on current state * @ap: the target ata_port * * LOCKING: @@ -3307,7 +3304,7 @@ static int ata_pio_complete (struct ata_port *ap) /** - * swap_buf_le16 - swap halves of 16-words in place + * swap_buf_le16 - swap halves of 16-bit words in place * @buf: Buffer to swap * @buf_words: Number of 16-bit words in buffer. * @@ -4520,19 +4517,6 @@ err_out: } -/** - * ata_port_start - Set port up for dma. - * @ap: Port to initialize - * - * Called just after data structures for each port are - * initialized. Allocates space for PRD table. - * - * May be used as the port_start() entry in ata_port_operations. - * - * LOCKING: - * Inherited from caller. - */ - /* * Execute a 'simple' command, that only consists of the opcode 'cmd' itself, * without filling any other registers @@ -4584,6 +4568,8 @@ static int ata_start_drive(struct ata_port *ap, struct ata_device *dev) /** * ata_device_resume - wakeup a previously suspended devices + * @ap: port the device is connected to + * @dev: the device to resume * * Kick the drive back into action, by sending it an idle immediate * command and making sure its transfer mode matches between drive @@ -4606,10 +4592,11 @@ int ata_device_resume(struct ata_port *ap, struct ata_device *dev) /** * ata_device_suspend - prepare a device for suspend + * @ap: port the device is connected to + * @dev: the device to suspend * * Flush the cache on the drive, if appropriate, then issue a * standbynow command. - * */ int ata_device_suspend(struct ata_port *ap, struct ata_device *dev) { @@ -4623,6 +4610,19 @@ int ata_device_suspend(struct ata_port *ap, struct ata_device *dev) return 0; } +/** + * ata_port_start - Set port up for dma. + * @ap: Port to initialize + * + * Called just after data structures for each port are + * initialized. Allocates space for PRD table. + * + * May be used as the port_start() entry in ata_port_operations. + * + * LOCKING: + * Inherited from caller. + */ + int ata_port_start (struct ata_port *ap) { struct device *dev = ap->host_set->dev; @@ -4880,9 +4880,9 @@ int ata_device_add(const struct ata_probe_ent *ent) ap = host_set->ports[i]; - DPRINTK("ata%u: probe begin\n", ap->id); + DPRINTK("ata%u: bus probe begin\n", ap->id); rc = ata_bus_probe(ap); - DPRINTK("ata%u: probe end\n", ap->id); + DPRINTK("ata%u: bus probe end\n", ap->id); if (rc) { /* FIXME: do something useful here? @@ -4906,7 +4906,7 @@ int ata_device_add(const struct ata_probe_ent *ent) } /* probes are done, now scan each port's disk(s) */ - DPRINTK("probe begin\n"); + DPRINTK("host probe begin\n"); for (i = 0; i < count; i++) { struct ata_port *ap = host_set->ports[i]; diff --git a/drivers/scsi/libata-scsi.c b/drivers/scsi/libata-scsi.c index ab6b53349d6f..6df82934d2d6 100644 --- a/drivers/scsi/libata-scsi.c +++ b/drivers/scsi/libata-scsi.c @@ -151,7 +151,7 @@ int ata_cmd_ioctl(struct scsi_device *scsidev, void __user *arg) struct scsi_sense_hdr sshdr; enum dma_data_direction data_dir; - if (NULL == (void *)arg) + if (arg == NULL) return -EINVAL; if (copy_from_user(args, arg, sizeof(args))) @@ -201,7 +201,7 @@ int ata_cmd_ioctl(struct scsi_device *scsidev, void __user *arg) /* Need code to retrieve data from check condition? */ if ((argbuf) - && copy_to_user((void *)(arg + sizeof(args)), argbuf, argsize)) + && copy_to_user(arg + sizeof(args), argbuf, argsize)) rc = -EFAULT; error: if (argbuf) @@ -228,7 +228,7 @@ int ata_task_ioctl(struct scsi_device *scsidev, void __user *arg) u8 args[7]; struct scsi_sense_hdr sshdr; - if (NULL == (void *)arg) + if (arg == NULL) return -EINVAL; if (copy_from_user(args, arg, sizeof(args))) @@ -2533,7 +2533,8 @@ out_unlock: /** * ata_scsi_simulate - simulate SCSI command on ATA device - * @id: current IDENTIFY data for target device. + * @ap: port the device is connected to + * @dev: the target device * @cmd: SCSI command being sent to device. * @done: SCSI command completion function. * -- cgit v1.2.1 From e4e7b89280d1d666e2c09e5ad36cf071796c4c7e Mon Sep 17 00:00:00 2001 From: Jeff Garzik Date: Tue, 31 Jan 2006 12:18:41 -0500 Subject: [libata sata_mv] add 6042 support, fix 60xx/50xx EDMA configuration --- drivers/scsi/sata_mv.c | 212 ++++++++++++++++++++++++++++++++++++++++++++++--- 1 file changed, 200 insertions(+), 12 deletions(-) (limited to 'drivers/scsi') diff --git a/drivers/scsi/sata_mv.c b/drivers/scsi/sata_mv.c index d9a554ca45c7..b55dd839ddbd 100644 --- a/drivers/scsi/sata_mv.c +++ b/drivers/scsi/sata_mv.c @@ -37,7 +37,7 @@ #include #define DRV_NAME "sata_mv" -#define DRV_VERSION "0.5" +#define DRV_VERSION "0.6" enum { /* BAR's are enumerated in terms of pci_resource_start() terms */ @@ -228,7 +228,9 @@ enum { MV_HP_ERRATA_50XXB2 = (1 << 2), MV_HP_ERRATA_60X1B2 = (1 << 3), MV_HP_ERRATA_60X1C0 = (1 << 4), - MV_HP_50XX = (1 << 5), + MV_HP_ERRATA_XX42A0 = (1 << 5), + MV_HP_50XX = (1 << 6), + MV_HP_GEN_IIE = (1 << 7), /* Port private flags (pp_flags) */ MV_PP_FLAG_EDMA_EN = (1 << 0), @@ -237,6 +239,9 @@ enum { #define IS_50XX(hpriv) ((hpriv)->hp_flags & MV_HP_50XX) #define IS_60XX(hpriv) (((hpriv)->hp_flags & MV_HP_50XX) == 0) +#define IS_GEN_I(hpriv) IS_50XX(hpriv) +#define IS_GEN_II(hpriv) IS_60XX(hpriv) +#define IS_GEN_IIE(hpriv) ((hpriv)->hp_flags & MV_HP_GEN_IIE) enum { /* Our DMA boundary is determined by an ePRD being unable to handle @@ -255,6 +260,8 @@ enum chip_type { chip_5080, chip_604x, chip_608x, + chip_6042, + chip_7042, }; /* Command ReQuest Block: 32B */ @@ -265,6 +272,14 @@ struct mv_crqb { u16 ata_cmd[11]; }; +struct mv_crqb_iie { + u32 addr; + u32 addr_hi; + u32 flags; + u32 len; + u32 ata_cmd[4]; +}; + /* Command ResPonse Block: 8B */ struct mv_crpb { u16 id; @@ -328,6 +343,7 @@ static void mv_host_stop(struct ata_host_set *host_set); static int mv_port_start(struct ata_port *ap); static void mv_port_stop(struct ata_port *ap); static void mv_qc_prep(struct ata_queued_cmd *qc); +static void mv_qc_prep_iie(struct ata_queued_cmd *qc); static unsigned int mv_qc_issue(struct ata_queued_cmd *qc); static irqreturn_t mv_interrupt(int irq, void *dev_instance, struct pt_regs *regs); @@ -430,6 +446,33 @@ static const struct ata_port_operations mv6_ops = { .host_stop = mv_host_stop, }; +static const struct ata_port_operations mv_iie_ops = { + .port_disable = ata_port_disable, + + .tf_load = ata_tf_load, + .tf_read = ata_tf_read, + .check_status = ata_check_status, + .exec_command = ata_exec_command, + .dev_select = ata_std_dev_select, + + .phy_reset = mv_phy_reset, + + .qc_prep = mv_qc_prep_iie, + .qc_issue = mv_qc_issue, + + .eng_timeout = mv_eng_timeout, + + .irq_handler = mv_interrupt, + .irq_clear = mv_irq_clear, + + .scr_read = mv_scr_read, + .scr_write = mv_scr_write, + + .port_start = mv_port_start, + .port_stop = mv_port_stop, + .host_stop = mv_host_stop, +}; + static const struct ata_port_info mv_port_info[] = { { /* chip_504x */ .sht = &mv_sht, @@ -467,6 +510,21 @@ static const struct ata_port_info mv_port_info[] = { .udma_mask = 0x7f, /* udma0-6 */ .port_ops = &mv6_ops, }, + { /* chip_6042 */ + .sht = &mv_sht, + .host_flags = (MV_COMMON_FLAGS | MV_6XXX_FLAGS), + .pio_mask = 0x1f, /* pio0-4 */ + .udma_mask = 0x7f, /* udma0-6 */ + .port_ops = &mv_iie_ops, + }, + { /* chip_7042 */ + .sht = &mv_sht, + .host_flags = (MV_COMMON_FLAGS | MV_6XXX_FLAGS | + MV_FLAG_DUAL_HC), + .pio_mask = 0x1f, /* pio0-4 */ + .udma_mask = 0x7f, /* udma0-6 */ + .port_ops = &mv_iie_ops, + }, }; static const struct pci_device_id mv_pci_tbl[] = { @@ -477,6 +535,7 @@ static const struct pci_device_id mv_pci_tbl[] = { {PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x6040), 0, 0, chip_604x}, {PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x6041), 0, 0, chip_604x}, + {PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x6042), 0, 0, chip_6042}, {PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x6080), 0, 0, chip_608x}, {PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x6081), 0, 0, chip_608x}, @@ -767,6 +826,33 @@ static inline void mv_priv_free(struct mv_port_priv *pp, struct device *dev) dma_free_coherent(dev, MV_PORT_PRIV_DMA_SZ, pp->crpb, pp->crpb_dma); } +static void mv_edma_cfg(struct mv_host_priv *hpriv, void __iomem *port_mmio) +{ + u32 cfg = readl(port_mmio + EDMA_CFG_OFS); + + /* set up non-NCQ EDMA configuration */ + cfg &= ~0x1f; /* clear queue depth */ + cfg &= ~EDMA_CFG_NCQ; /* clear NCQ mode */ + cfg &= ~(1 << 9); /* disable equeue */ + + if (IS_GEN_I(hpriv)) + cfg |= (1 << 8); /* enab config burst size mask */ + + else if (IS_GEN_II(hpriv)) + cfg |= EDMA_CFG_RD_BRST_EXT | EDMA_CFG_WR_BUFF_LEN; + + else if (IS_GEN_IIE(hpriv)) { + cfg |= (1 << 23); /* dis RX PM port mask */ + cfg &= ~(1 << 16); /* dis FIS-based switching (for now) */ + cfg &= ~(1 << 19); /* dis 128-entry queue (for now?) */ + cfg |= (1 << 18); /* enab early completion */ + cfg |= (1 << 17); /* enab host q cache */ + cfg |= (1 << 22); /* enab cutthrough */ + } + + writelfl(cfg, port_mmio + EDMA_CFG_OFS); +} + /** * mv_port_start - Port specific init/start routine. * @ap: ATA channel to manipulate @@ -780,6 +866,7 @@ static inline void mv_priv_free(struct mv_port_priv *pp, struct device *dev) static int mv_port_start(struct ata_port *ap) { struct device *dev = ap->host_set->dev; + struct mv_host_priv *hpriv = ap->host_set->private_data; struct mv_port_priv *pp; void __iomem *port_mmio = mv_ap_base(ap); void *mem; @@ -823,17 +910,26 @@ static int mv_port_start(struct ata_port *ap) pp->sg_tbl = mem; pp->sg_tbl_dma = mem_dma; - writelfl(EDMA_CFG_Q_DEPTH | EDMA_CFG_RD_BRST_EXT | - EDMA_CFG_WR_BUFF_LEN, port_mmio + EDMA_CFG_OFS); + mv_edma_cfg(hpriv, port_mmio); writel((pp->crqb_dma >> 16) >> 16, port_mmio + EDMA_REQ_Q_BASE_HI_OFS); writelfl(pp->crqb_dma & EDMA_REQ_Q_BASE_LO_MASK, port_mmio + EDMA_REQ_Q_IN_PTR_OFS); - writelfl(0, port_mmio + EDMA_REQ_Q_OUT_PTR_OFS); - writelfl(0, port_mmio + EDMA_RSP_Q_IN_PTR_OFS); + if (hpriv->hp_flags & MV_HP_ERRATA_XX42A0) + writelfl(pp->crqb_dma & 0xffffffff, + port_mmio + EDMA_REQ_Q_OUT_PTR_OFS); + else + writelfl(0, port_mmio + EDMA_REQ_Q_OUT_PTR_OFS); writel((pp->crpb_dma >> 16) >> 16, port_mmio + EDMA_RSP_Q_BASE_HI_OFS); + + if (hpriv->hp_flags & MV_HP_ERRATA_XX42A0) + writelfl(pp->crpb_dma & 0xffffffff, + port_mmio + EDMA_RSP_Q_IN_PTR_OFS); + else + writelfl(0, port_mmio + EDMA_RSP_Q_IN_PTR_OFS); + writelfl(pp->crpb_dma & EDMA_RSP_Q_BASE_LO_MASK, port_mmio + EDMA_RSP_Q_OUT_PTR_OFS); @@ -954,9 +1050,8 @@ static void mv_qc_prep(struct ata_queued_cmd *qc) struct ata_taskfile *tf; u16 flags = 0; - if (ATA_PROT_DMA != qc->tf.protocol) { + if (ATA_PROT_DMA != qc->tf.protocol) return; - } /* the req producer index should be the same as we remember it */ assert(((readl(mv_ap_base(qc->ap) + EDMA_REQ_Q_IN_PTR_OFS) >> @@ -965,9 +1060,8 @@ static void mv_qc_prep(struct ata_queued_cmd *qc) /* Fill in command request block */ - if (!(qc->tf.flags & ATA_TFLAG_WRITE)) { + if (!(qc->tf.flags & ATA_TFLAG_WRITE)) flags |= CRQB_FLAG_READ; - } assert(MV_MAX_Q_DEPTH > qc->tag); flags |= qc->tag << CRQB_TAG_SHIFT; @@ -1022,9 +1116,76 @@ static void mv_qc_prep(struct ata_queued_cmd *qc) mv_crqb_pack_cmd(cw++, tf->device, ATA_REG_DEVICE, 0); mv_crqb_pack_cmd(cw++, tf->command, ATA_REG_CMD, 1); /* last */ - if (!(qc->flags & ATA_QCFLAG_DMAMAP)) { + if (!(qc->flags & ATA_QCFLAG_DMAMAP)) + return; + mv_fill_sg(qc); +} + +/** + * mv_qc_prep_iie - Host specific command preparation. + * @qc: queued command to prepare + * + * This routine simply redirects to the general purpose routine + * if command is not DMA. Else, it handles prep of the CRQB + * (command request block), does some sanity checking, and calls + * the SG load routine. + * + * LOCKING: + * Inherited from caller. + */ +static void mv_qc_prep_iie(struct ata_queued_cmd *qc) +{ + struct ata_port *ap = qc->ap; + struct mv_port_priv *pp = ap->private_data; + struct mv_crqb_iie *crqb; + struct ata_taskfile *tf; + u32 flags = 0; + + if (ATA_PROT_DMA != qc->tf.protocol) + return; + + /* the req producer index should be the same as we remember it */ + assert(((readl(mv_ap_base(qc->ap) + EDMA_REQ_Q_IN_PTR_OFS) >> + EDMA_REQ_Q_PTR_SHIFT) & MV_MAX_Q_DEPTH_MASK) == + pp->req_producer); + + /* Fill in Gen IIE command request block + */ + if (!(qc->tf.flags & ATA_TFLAG_WRITE)) + flags |= CRQB_FLAG_READ; + + assert(MV_MAX_Q_DEPTH > qc->tag); + flags |= qc->tag << CRQB_TAG_SHIFT; + + crqb = (struct mv_crqb_iie *) &pp->crqb[pp->req_producer]; + crqb->addr = cpu_to_le32(pp->sg_tbl_dma & 0xffffffff); + crqb->addr_hi = cpu_to_le32((pp->sg_tbl_dma >> 16) >> 16); + crqb->flags = cpu_to_le32(flags); + + tf = &qc->tf; + crqb->ata_cmd[0] = cpu_to_le32( + (tf->command << 16) | + (tf->feature << 24) + ); + crqb->ata_cmd[1] = cpu_to_le32( + (tf->lbal << 0) | + (tf->lbam << 8) | + (tf->lbah << 16) | + (tf->device << 24) + ); + crqb->ata_cmd[2] = cpu_to_le32( + (tf->hob_lbal << 0) | + (tf->hob_lbam << 8) | + (tf->hob_lbah << 16) | + (tf->hob_feature << 24) + ); + crqb->ata_cmd[3] = cpu_to_le32( + (tf->nsect << 0) | + (tf->hob_nsect << 8) + ); + + if (!(qc->flags & ATA_QCFLAG_DMAMAP)) return; - } mv_fill_sg(qc); } @@ -1674,6 +1835,12 @@ static void mv6_phy_errata(struct mv_host_priv *hpriv, void __iomem *mmio, m2 |= hpriv->signal[port].pre; m2 &= ~(1 << 16); + /* according to mvSata 3.6.1, some IIE values are fixed */ + if (IS_GEN_IIE(hpriv)) { + m2 &= ~0xC30FF01F; + m2 |= 0x0000900F; + } + writel(m2, port_mmio + PHY_MODE2); } @@ -1978,6 +2145,27 @@ static int mv_chip_id(struct pci_dev *pdev, struct mv_host_priv *hpriv, } break; + case chip_7042: + case chip_6042: + hpriv->ops = &mv6xxx_ops; + + hp_flags |= MV_HP_GEN_IIE; + + switch (rev_id) { + case 0x0: + hp_flags |= MV_HP_ERRATA_XX42A0; + break; + case 0x1: + hp_flags |= MV_HP_ERRATA_60X1C0; + break; + default: + dev_printk(KERN_WARNING, &pdev->dev, + "Applying 60X1C0 workarounds to unknown rev\n"); + hp_flags |= MV_HP_ERRATA_60X1C0; + break; + } + break; + default: printk(KERN_ERR DRV_NAME ": BUG: invalid board index %u\n", board_idx); return 1; -- cgit v1.2.1 From dde44589bf9fac0168c6ce6d097c99c33b18074f Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Thu, 2 Feb 2006 00:56:10 +0900 Subject: [PATCH] libata: implement ATA_FLAG_IN_EH port flag ATA_FLAG_IN_EH flag is set on entry to EH and cleared on completion. This patch just sets and clears the flag. Following patches will build normal qc execution / EH synchronization aroung this flag. Signed-off-by: Tejun Heo Signed-off-by: Jeff Garzik --- drivers/scsi/libata-scsi.c | 9 +++++++++ 1 file changed, 9 insertions(+) (limited to 'drivers/scsi') diff --git a/drivers/scsi/libata-scsi.c b/drivers/scsi/libata-scsi.c index 2d328b3af067..3a4f40b251fb 100644 --- a/drivers/scsi/libata-scsi.c +++ b/drivers/scsi/libata-scsi.c @@ -735,6 +735,11 @@ int ata_scsi_error(struct Scsi_Host *host) DPRINTK("ENTER\n"); + spin_lock_irqsave(&ap->host_set->lock, flags); + assert(!(ap->flags & ATA_FLAG_IN_EH)); + ap->flags |= ATA_FLAG_IN_EH; + spin_unlock_irqrestore(&ap->host_set->lock, flags); + ap = (struct ata_port *) &host->hostdata[0]; ap->ops->eng_timeout(ap); @@ -742,6 +747,10 @@ int ata_scsi_error(struct Scsi_Host *host) scsi_eh_flush_done_q(&ap->eh_done_q); + spin_lock_irqsave(&ap->host_set->lock, flags); + ap->flags &= ~ATA_FLAG_IN_EH; + spin_unlock_irqrestore(&ap->host_set->lock, flags); + DPRINTK("EXIT\n"); return 0; } -- cgit v1.2.1 From c18d06f89fd09ee0059c4899e615c471d59af66a Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Thu, 2 Feb 2006 00:56:10 +0900 Subject: [PATCH] libata: EH / pio tasks synchronization This patch makes sure that pio tasks are flushed before proceeding with EH. Signed-off-by: Tejun Heo Signed-off-by: Jeff Garzik --- drivers/scsi/libata-core.c | 56 +++++++++++++++++++++++++++++++++++++++++++--- 1 file changed, 53 insertions(+), 3 deletions(-) (limited to 'drivers/scsi') diff --git a/drivers/scsi/libata-core.c b/drivers/scsi/libata-core.c index 249e67fab81f..9a785cf0c5b1 100644 --- a/drivers/scsi/libata-core.c +++ b/drivers/scsi/libata-core.c @@ -1074,19 +1074,66 @@ static unsigned int ata_pio_modes(const struct ata_device *adev) static inline void ata_queue_packet_task(struct ata_port *ap) { - queue_work(ata_wq, &ap->packet_task); + if (!(ap->flags & ATA_FLAG_FLUSH_PIO_TASK)) + queue_work(ata_wq, &ap->packet_task); } static inline void ata_queue_pio_task(struct ata_port *ap) { - queue_work(ata_wq, &ap->pio_task); + if (!(ap->flags & ATA_FLAG_FLUSH_PIO_TASK)) + queue_work(ata_wq, &ap->pio_task); } static inline void ata_queue_delayed_pio_task(struct ata_port *ap, unsigned long delay) { - queue_delayed_work(ata_wq, &ap->pio_task, delay); + if (!(ap->flags & ATA_FLAG_FLUSH_PIO_TASK)) + queue_delayed_work(ata_wq, &ap->pio_task, delay); +} + +/** + * ata_flush_pio_tasks - Flush pio_task and packet_task + * @ap: the target ata_port + * + * After this function completes, pio_task and packet_task are + * guranteed not to be running or scheduled. + * + * LOCKING: + * Kernel thread context (may sleep) + */ + +static void ata_flush_pio_tasks(struct ata_port *ap) +{ + int tmp = 0; + unsigned long flags; + + DPRINTK("ENTER\n"); + + spin_lock_irqsave(&ap->host_set->lock, flags); + ap->flags |= ATA_FLAG_FLUSH_PIO_TASK; + spin_unlock_irqrestore(&ap->host_set->lock, flags); + + DPRINTK("flush #1\n"); + flush_workqueue(ata_wq); + + /* + * At this point, if a task is running, it's guaranteed to see + * the FLUSH flag; thus, it will never queue pio tasks again. + * Cancel and flush. + */ + tmp |= cancel_delayed_work(&ap->pio_task); + tmp |= cancel_delayed_work(&ap->packet_task); + if (!tmp) { + DPRINTK("flush #2\n"); + flush_workqueue(ata_wq); + } + + spin_lock_irqsave(&ap->host_set->lock, flags); + ap->flags &= ~ATA_FLAG_FLUSH_PIO_TASK; + spin_unlock_irqrestore(&ap->host_set->lock, flags); + + DPRINTK("EXIT\n"); } void ata_qc_complete_internal(struct ata_queued_cmd *qc) @@ -3767,6 +3814,9 @@ static void ata_qc_timeout(struct ata_queued_cmd *qc) DPRINTK("ENTER\n"); + ata_flush_pio_tasks(ap); + ap->hsm_task_state = HSM_ST_IDLE; + spin_lock_irqsave(&host_set->lock, flags); switch (qc->tf.protocol) { -- cgit v1.2.1 From b911fc3ae0121ff0b72a52e58823c3f8ac3094d0 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Thu, 2 Feb 2006 18:20:00 +0900 Subject: [PATCH] libata: fix ata_std_probe_reset() SATA detection ap->cbl is initialized during postreset and thus unknown on entry to ata_std_probe_reset(). This patch makes ata_std_probe_reset() use ATA_FLAG_SATA flag instead of ap->cbl to detect SATA port. Signed-off-by: Tejun Heo Signed-off-by: Jeff Garzik --- drivers/scsi/libata-core.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/scsi') diff --git a/drivers/scsi/libata-core.c b/drivers/scsi/libata-core.c index 9a785cf0c5b1..d4fb0f754c91 100644 --- a/drivers/scsi/libata-core.c +++ b/drivers/scsi/libata-core.c @@ -2472,7 +2472,7 @@ int ata_std_probe_reset(struct ata_port *ap, unsigned int *classes) ata_reset_fn_t hardreset; hardreset = NULL; - if (ap->cbl == ATA_CBL_SATA && ap->ops->scr_read) + if (ap->flags & ATA_FLAG_SATA && ap->ops->scr_read) hardreset = sata_std_hardreset; return ata_drive_probe_reset(ap, ata_std_softreset, hardreset, -- cgit v1.2.1 From 7a7921e8661a6b9fb99400983ee67df7e125853b Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Thu, 2 Feb 2006 18:20:00 +0900 Subject: [PATCH] libata: separate out sata_phy_resume() from sata_std_hardreset() This patch separates out sata_phy_resume() from sata_std_hardreset(). The function will later be used by probeinit callback. Signed-off-by: Tejun Heo Signed-off-by: Jeff Garzik --- drivers/scsi/libata-core.c | 32 +++++++++++++++++++++----------- 1 file changed, 21 insertions(+), 11 deletions(-) (limited to 'drivers/scsi') diff --git a/drivers/scsi/libata-core.c b/drivers/scsi/libata-core.c index d4fb0f754c91..99f4bf6022ee 100644 --- a/drivers/scsi/libata-core.c +++ b/drivers/scsi/libata-core.c @@ -2277,6 +2277,24 @@ err_out: DPRINTK("EXIT\n"); } +static int sata_phy_resume(struct ata_port *ap) +{ + unsigned long timeout = jiffies + (HZ * 5); + u32 sstatus; + + scr_write_flush(ap, SCR_CONTROL, 0x300); + + /* Wait for phy to become ready, if necessary. */ + do { + msleep(200); + sstatus = scr_read(ap, SCR_STATUS); + if ((sstatus & 0xf) != 1) + return 0; + } while (time_before(jiffies, timeout)); + + return -1; +} + /** * ata_std_softreset - reset host port via ATA SRST * @ap: port to reset @@ -2357,8 +2375,7 @@ int ata_std_softreset(struct ata_port *ap, int verbose, unsigned int *classes) */ int sata_std_hardreset(struct ata_port *ap, int verbose, unsigned int *class) { - u32 sstatus, serror; - unsigned long timeout = jiffies + (HZ * 5); + u32 serror; DPRINTK("ENTER\n"); @@ -2371,15 +2388,8 @@ int sata_std_hardreset(struct ata_port *ap, int verbose, unsigned int *class) */ msleep(1); - scr_write_flush(ap, SCR_CONTROL, 0x300); - - /* Wait for phy to become ready, if necessary. */ - do { - msleep(200); - sstatus = scr_read(ap, SCR_STATUS); - if ((sstatus & 0xf) != 1) - break; - } while (time_before(jiffies, timeout)); + /* Bring phy back */ + sata_phy_resume(ap); /* Clear SError */ serror = scr_read(ap, SCR_ERROR); -- cgit v1.2.1 From 5140788f77d71b4f05fde217adbfb0c92f28f20c Mon Sep 17 00:00:00 2001 From: Jeff Garzik Date: Thu, 9 Feb 2006 01:56:05 -0500 Subject: [libata scsi] build fix for ATA_FLAG_IN_EH change --- drivers/scsi/libata-scsi.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) (limited to 'drivers/scsi') diff --git a/drivers/scsi/libata-scsi.c b/drivers/scsi/libata-scsi.c index 3a4f40b251fb..b007bb409382 100644 --- a/drivers/scsi/libata-scsi.c +++ b/drivers/scsi/libata-scsi.c @@ -732,15 +732,17 @@ int ata_scsi_slave_config(struct scsi_device *sdev) int ata_scsi_error(struct Scsi_Host *host) { struct ata_port *ap; + unsigned long flags; DPRINTK("ENTER\n"); + ap = (struct ata_port *) &host->hostdata[0]; + spin_lock_irqsave(&ap->host_set->lock, flags); assert(!(ap->flags & ATA_FLAG_IN_EH)); ap->flags |= ATA_FLAG_IN_EH; spin_unlock_irqrestore(&ap->host_set->lock, flags); - ap = (struct ata_port *) &host->hostdata[0]; ap->ops->eng_timeout(ap); assert(host->host_failed == 0 && list_empty(&host->eh_cmd_q)); -- cgit v1.2.1 From 7944ea9522ce0ea32d57894b3dc2540b0bdca66e Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Thu, 2 Feb 2006 18:20:00 +0900 Subject: [PATCH] libata: add probeinit component operation to ata_drive_probe_reset() This patch adds probeinit component operation to ata_drive_probe_reset(). If present, this new operation is called before performing any reset. The operations's roll is to prepare @ap for following probe-reset operations. Signed-off-by: Tejun Heo Signed-off-by: Jeff Garzik --- drivers/scsi/libata-core.c | 9 +++++++-- 1 file changed, 7 insertions(+), 2 deletions(-) (limited to 'drivers/scsi') diff --git a/drivers/scsi/libata-core.c b/drivers/scsi/libata-core.c index 99f4bf6022ee..c36c5a9a4617 100644 --- a/drivers/scsi/libata-core.c +++ b/drivers/scsi/libata-core.c @@ -2485,7 +2485,8 @@ int ata_std_probe_reset(struct ata_port *ap, unsigned int *classes) if (ap->flags & ATA_FLAG_SATA && ap->ops->scr_read) hardreset = sata_std_hardreset; - return ata_drive_probe_reset(ap, ata_std_softreset, hardreset, + return ata_drive_probe_reset(ap, NULL, + ata_std_softreset, hardreset, ata_std_postreset, classes); } @@ -2524,6 +2525,7 @@ static int do_probe_reset(struct ata_port *ap, ata_reset_fn_t reset, /** * ata_drive_probe_reset - Perform probe reset with given methods * @ap: port to reset + * @probeinit: probeinit method (can be NULL) * @softreset: softreset method (can be NULL) * @hardreset: hardreset method (can be NULL) * @postreset: postreset method (can be NULL) @@ -2552,12 +2554,15 @@ static int do_probe_reset(struct ata_port *ap, ata_reset_fn_t reset, * if classification fails, and any error code from reset * methods. */ -int ata_drive_probe_reset(struct ata_port *ap, +int ata_drive_probe_reset(struct ata_port *ap, ata_probeinit_fn_t probeinit, ata_reset_fn_t softreset, ata_reset_fn_t hardreset, ata_postreset_fn_t postreset, unsigned int *classes) { int rc = -EINVAL; + if (probeinit) + probeinit(ap); + if (softreset) { rc = do_probe_reset(ap, softreset, postreset, classes); if (rc == 0) -- cgit v1.2.1 From 8a19ac89edbe9b702c10fd2039b8cb2db4644a5f Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Thu, 2 Feb 2006 18:20:00 +0900 Subject: [PATCH] libata: implement ata_std_probeinit() This patch implements the off-the-shelf probeinit component operation. Currently, all it does is waking up the PHY if it's a SATA port. Signed-off-by: Tejun Heo Signed-off-by: Jeff Garzik --- drivers/scsi/libata-core.c | 16 +++++++++++++++- 1 file changed, 15 insertions(+), 1 deletion(-) (limited to 'drivers/scsi') diff --git a/drivers/scsi/libata-core.c b/drivers/scsi/libata-core.c index c36c5a9a4617..14cdbb336dd5 100644 --- a/drivers/scsi/libata-core.c +++ b/drivers/scsi/libata-core.c @@ -2295,6 +2295,19 @@ static int sata_phy_resume(struct ata_port *ap) return -1; } +/** + * ata_std_probeinit - initialize probing + * @ap: port to be probed + * + * @ap is about to be probed. Initialize it. This function is + * to be used as standard callback for ata_drive_probe_reset(). + */ +extern void ata_std_probeinit(struct ata_port *ap) +{ + if (ap->flags & ATA_FLAG_SATA && ap->ops->scr_read) + sata_phy_resume(ap); +} + /** * ata_std_softreset - reset host port via ATA SRST * @ap: port to reset @@ -2485,7 +2498,7 @@ int ata_std_probe_reset(struct ata_port *ap, unsigned int *classes) if (ap->flags & ATA_FLAG_SATA && ap->ops->scr_read) hardreset = sata_std_hardreset; - return ata_drive_probe_reset(ap, NULL, + return ata_drive_probe_reset(ap, ata_std_probeinit, ata_std_softreset, hardreset, ata_std_postreset, classes); } @@ -5535,6 +5548,7 @@ EXPORT_SYMBOL_GPL(ata_port_probe); EXPORT_SYMBOL_GPL(sata_phy_reset); EXPORT_SYMBOL_GPL(__sata_phy_reset); EXPORT_SYMBOL_GPL(ata_bus_reset); +EXPORT_SYMBOL_GPL(ata_std_probeinit); EXPORT_SYMBOL_GPL(ata_std_softreset); EXPORT_SYMBOL_GPL(sata_std_hardreset); EXPORT_SYMBOL_GPL(ata_std_postreset); -- cgit v1.2.1 From 1fdffbce0332b3e00993d741e76935e7f4f0d40f Mon Sep 17 00:00:00 2001 From: Jeff Garzik Date: Thu, 9 Feb 2006 05:15:27 -0500 Subject: [libata] Move PCI IDE BMDMA-related code to new file libata-bmdma.c. --- drivers/scsi/Makefile | 2 +- drivers/scsi/libata-bmdma.c | 703 ++++++++++++++++++++++++++++++++++++++++++++ drivers/scsi/libata-core.c | 693 ++----------------------------------------- 3 files changed, 724 insertions(+), 674 deletions(-) create mode 100644 drivers/scsi/libata-bmdma.c (limited to 'drivers/scsi') diff --git a/drivers/scsi/Makefile b/drivers/scsi/Makefile index 320e765fa0cd..15dc2e00e1b2 100644 --- a/drivers/scsi/Makefile +++ b/drivers/scsi/Makefile @@ -163,7 +163,7 @@ ncr53c8xx-flags-$(CONFIG_SCSI_ZALON) \ CFLAGS_ncr53c8xx.o := $(ncr53c8xx-flags-y) $(ncr53c8xx-flags-m) zalon7xx-objs := zalon.o ncr53c8xx.o NCR_Q720_mod-objs := NCR_Q720.o ncr53c8xx.o -libata-objs := libata-core.o libata-scsi.o +libata-objs := libata-core.o libata-scsi.o libata-bmdma.o oktagon_esp_mod-objs := oktagon_esp.o oktagon_io.o # Files generated that shall be removed upon make clean diff --git a/drivers/scsi/libata-bmdma.c b/drivers/scsi/libata-bmdma.c new file mode 100644 index 000000000000..a93336adcd23 --- /dev/null +++ b/drivers/scsi/libata-bmdma.c @@ -0,0 +1,703 @@ +/* + * libata-bmdma.c - helper library for PCI IDE BMDMA + * + * Maintained by: Jeff Garzik + * Please ALWAYS copy linux-ide@vger.kernel.org + * on emails. + * + * Copyright 2003-2006 Red Hat, Inc. All rights reserved. + * Copyright 2003-2006 Jeff Garzik + * + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; see the file COPYING. If not, write to + * the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA. + * + * + * libata documentation is available via 'make {ps|pdf}docs', + * as Documentation/DocBook/libata.* + * + * Hardware documentation available from http://www.t13.org/ and + * http://www.sata-io.org/ + * + */ + +#include +#include +#include +#include + +#include "libata.h" + +/** + * ata_tf_load_pio - send taskfile registers to host controller + * @ap: Port to which output is sent + * @tf: ATA taskfile register set + * + * Outputs ATA taskfile to standard ATA host controller. + * + * LOCKING: + * Inherited from caller. + */ + +static void ata_tf_load_pio(struct ata_port *ap, const struct ata_taskfile *tf) +{ + struct ata_ioports *ioaddr = &ap->ioaddr; + unsigned int is_addr = tf->flags & ATA_TFLAG_ISADDR; + + if (tf->ctl != ap->last_ctl) { + outb(tf->ctl, ioaddr->ctl_addr); + ap->last_ctl = tf->ctl; + ata_wait_idle(ap); + } + + if (is_addr && (tf->flags & ATA_TFLAG_LBA48)) { + outb(tf->hob_feature, ioaddr->feature_addr); + outb(tf->hob_nsect, ioaddr->nsect_addr); + outb(tf->hob_lbal, ioaddr->lbal_addr); + outb(tf->hob_lbam, ioaddr->lbam_addr); + outb(tf->hob_lbah, ioaddr->lbah_addr); + VPRINTK("hob: feat 0x%X nsect 0x%X, lba 0x%X 0x%X 0x%X\n", + tf->hob_feature, + tf->hob_nsect, + tf->hob_lbal, + tf->hob_lbam, + tf->hob_lbah); + } + + if (is_addr) { + outb(tf->feature, ioaddr->feature_addr); + outb(tf->nsect, ioaddr->nsect_addr); + outb(tf->lbal, ioaddr->lbal_addr); + outb(tf->lbam, ioaddr->lbam_addr); + outb(tf->lbah, ioaddr->lbah_addr); + VPRINTK("feat 0x%X nsect 0x%X lba 0x%X 0x%X 0x%X\n", + tf->feature, + tf->nsect, + tf->lbal, + tf->lbam, + tf->lbah); + } + + if (tf->flags & ATA_TFLAG_DEVICE) { + outb(tf->device, ioaddr->device_addr); + VPRINTK("device 0x%X\n", tf->device); + } + + ata_wait_idle(ap); +} + +/** + * ata_tf_load_mmio - send taskfile registers to host controller + * @ap: Port to which output is sent + * @tf: ATA taskfile register set + * + * Outputs ATA taskfile to standard ATA host controller using MMIO. + * + * LOCKING: + * Inherited from caller. + */ + +static void ata_tf_load_mmio(struct ata_port *ap, const struct ata_taskfile *tf) +{ + struct ata_ioports *ioaddr = &ap->ioaddr; + unsigned int is_addr = tf->flags & ATA_TFLAG_ISADDR; + + if (tf->ctl != ap->last_ctl) { + writeb(tf->ctl, (void __iomem *) ap->ioaddr.ctl_addr); + ap->last_ctl = tf->ctl; + ata_wait_idle(ap); + } + + if (is_addr && (tf->flags & ATA_TFLAG_LBA48)) { + writeb(tf->hob_feature, (void __iomem *) ioaddr->feature_addr); + writeb(tf->hob_nsect, (void __iomem *) ioaddr->nsect_addr); + writeb(tf->hob_lbal, (void __iomem *) ioaddr->lbal_addr); + writeb(tf->hob_lbam, (void __iomem *) ioaddr->lbam_addr); + writeb(tf->hob_lbah, (void __iomem *) ioaddr->lbah_addr); + VPRINTK("hob: feat 0x%X nsect 0x%X, lba 0x%X 0x%X 0x%X\n", + tf->hob_feature, + tf->hob_nsect, + tf->hob_lbal, + tf->hob_lbam, + tf->hob_lbah); + } + + if (is_addr) { + writeb(tf->feature, (void __iomem *) ioaddr->feature_addr); + writeb(tf->nsect, (void __iomem *) ioaddr->nsect_addr); + writeb(tf->lbal, (void __iomem *) ioaddr->lbal_addr); + writeb(tf->lbam, (void __iomem *) ioaddr->lbam_addr); + writeb(tf->lbah, (void __iomem *) ioaddr->lbah_addr); + VPRINTK("feat 0x%X nsect 0x%X lba 0x%X 0x%X 0x%X\n", + tf->feature, + tf->nsect, + tf->lbal, + tf->lbam, + tf->lbah); + } + + if (tf->flags & ATA_TFLAG_DEVICE) { + writeb(tf->device, (void __iomem *) ioaddr->device_addr); + VPRINTK("device 0x%X\n", tf->device); + } + + ata_wait_idle(ap); +} + + +/** + * ata_tf_load - send taskfile registers to host controller + * @ap: Port to which output is sent + * @tf: ATA taskfile register set + * + * Outputs ATA taskfile to standard ATA host controller using MMIO + * or PIO as indicated by the ATA_FLAG_MMIO flag. + * Writes the control, feature, nsect, lbal, lbam, and lbah registers. + * Optionally (ATA_TFLAG_LBA48) writes hob_feature, hob_nsect, + * hob_lbal, hob_lbam, and hob_lbah. + * + * This function waits for idle (!BUSY and !DRQ) after writing + * registers. If the control register has a new value, this + * function also waits for idle after writing control and before + * writing the remaining registers. + * + * May be used as the tf_load() entry in ata_port_operations. + * + * LOCKING: + * Inherited from caller. + */ +void ata_tf_load(struct ata_port *ap, const struct ata_taskfile *tf) +{ + if (ap->flags & ATA_FLAG_MMIO) + ata_tf_load_mmio(ap, tf); + else + ata_tf_load_pio(ap, tf); +} + +/** + * ata_exec_command_pio - issue ATA command to host controller + * @ap: port to which command is being issued + * @tf: ATA taskfile register set + * + * Issues PIO write to ATA command register, with proper + * synchronization with interrupt handler / other threads. + * + * LOCKING: + * spin_lock_irqsave(host_set lock) + */ + +static void ata_exec_command_pio(struct ata_port *ap, const struct ata_taskfile *tf) +{ + DPRINTK("ata%u: cmd 0x%X\n", ap->id, tf->command); + + outb(tf->command, ap->ioaddr.command_addr); + ata_pause(ap); +} + + +/** + * ata_exec_command_mmio - issue ATA command to host controller + * @ap: port to which command is being issued + * @tf: ATA taskfile register set + * + * Issues MMIO write to ATA command register, with proper + * synchronization with interrupt handler / other threads. + * + * LOCKING: + * spin_lock_irqsave(host_set lock) + */ + +static void ata_exec_command_mmio(struct ata_port *ap, const struct ata_taskfile *tf) +{ + DPRINTK("ata%u: cmd 0x%X\n", ap->id, tf->command); + + writeb(tf->command, (void __iomem *) ap->ioaddr.command_addr); + ata_pause(ap); +} + + +/** + * ata_exec_command - issue ATA command to host controller + * @ap: port to which command is being issued + * @tf: ATA taskfile register set + * + * Issues PIO/MMIO write to ATA command register, with proper + * synchronization with interrupt handler / other threads. + * + * LOCKING: + * spin_lock_irqsave(host_set lock) + */ +void ata_exec_command(struct ata_port *ap, const struct ata_taskfile *tf) +{ + if (ap->flags & ATA_FLAG_MMIO) + ata_exec_command_mmio(ap, tf); + else + ata_exec_command_pio(ap, tf); +} + +/** + * ata_tf_read_pio - input device's ATA taskfile shadow registers + * @ap: Port from which input is read + * @tf: ATA taskfile register set for storing input + * + * Reads ATA taskfile registers for currently-selected device + * into @tf. + * + * LOCKING: + * Inherited from caller. + */ + +static void ata_tf_read_pio(struct ata_port *ap, struct ata_taskfile *tf) +{ + struct ata_ioports *ioaddr = &ap->ioaddr; + + tf->command = ata_check_status(ap); + tf->feature = inb(ioaddr->error_addr); + tf->nsect = inb(ioaddr->nsect_addr); + tf->lbal = inb(ioaddr->lbal_addr); + tf->lbam = inb(ioaddr->lbam_addr); + tf->lbah = inb(ioaddr->lbah_addr); + tf->device = inb(ioaddr->device_addr); + + if (tf->flags & ATA_TFLAG_LBA48) { + outb(tf->ctl | ATA_HOB, ioaddr->ctl_addr); + tf->hob_feature = inb(ioaddr->error_addr); + tf->hob_nsect = inb(ioaddr->nsect_addr); + tf->hob_lbal = inb(ioaddr->lbal_addr); + tf->hob_lbam = inb(ioaddr->lbam_addr); + tf->hob_lbah = inb(ioaddr->lbah_addr); + } +} + +/** + * ata_tf_read_mmio - input device's ATA taskfile shadow registers + * @ap: Port from which input is read + * @tf: ATA taskfile register set for storing input + * + * Reads ATA taskfile registers for currently-selected device + * into @tf via MMIO. + * + * LOCKING: + * Inherited from caller. + */ + +static void ata_tf_read_mmio(struct ata_port *ap, struct ata_taskfile *tf) +{ + struct ata_ioports *ioaddr = &ap->ioaddr; + + tf->command = ata_check_status(ap); + tf->feature = readb((void __iomem *)ioaddr->error_addr); + tf->nsect = readb((void __iomem *)ioaddr->nsect_addr); + tf->lbal = readb((void __iomem *)ioaddr->lbal_addr); + tf->lbam = readb((void __iomem *)ioaddr->lbam_addr); + tf->lbah = readb((void __iomem *)ioaddr->lbah_addr); + tf->device = readb((void __iomem *)ioaddr->device_addr); + + if (tf->flags & ATA_TFLAG_LBA48) { + writeb(tf->ctl | ATA_HOB, (void __iomem *) ap->ioaddr.ctl_addr); + tf->hob_feature = readb((void __iomem *)ioaddr->error_addr); + tf->hob_nsect = readb((void __iomem *)ioaddr->nsect_addr); + tf->hob_lbal = readb((void __iomem *)ioaddr->lbal_addr); + tf->hob_lbam = readb((void __iomem *)ioaddr->lbam_addr); + tf->hob_lbah = readb((void __iomem *)ioaddr->lbah_addr); + } +} + + +/** + * ata_tf_read - input device's ATA taskfile shadow registers + * @ap: Port from which input is read + * @tf: ATA taskfile register set for storing input + * + * Reads ATA taskfile registers for currently-selected device + * into @tf. + * + * Reads nsect, lbal, lbam, lbah, and device. If ATA_TFLAG_LBA48 + * is set, also reads the hob registers. + * + * May be used as the tf_read() entry in ata_port_operations. + * + * LOCKING: + * Inherited from caller. + */ +void ata_tf_read(struct ata_port *ap, struct ata_taskfile *tf) +{ + if (ap->flags & ATA_FLAG_MMIO) + ata_tf_read_mmio(ap, tf); + else + ata_tf_read_pio(ap, tf); +} + +/** + * ata_check_status_pio - Read device status reg & clear interrupt + * @ap: port where the device is + * + * Reads ATA taskfile status register for currently-selected device + * and return its value. This also clears pending interrupts + * from this device + * + * LOCKING: + * Inherited from caller. + */ +static u8 ata_check_status_pio(struct ata_port *ap) +{ + return inb(ap->ioaddr.status_addr); +} + +/** + * ata_check_status_mmio - Read device status reg & clear interrupt + * @ap: port where the device is + * + * Reads ATA taskfile status register for currently-selected device + * via MMIO and return its value. This also clears pending interrupts + * from this device + * + * LOCKING: + * Inherited from caller. + */ +static u8 ata_check_status_mmio(struct ata_port *ap) +{ + return readb((void __iomem *) ap->ioaddr.status_addr); +} + + +/** + * ata_check_status - Read device status reg & clear interrupt + * @ap: port where the device is + * + * Reads ATA taskfile status register for currently-selected device + * and return its value. This also clears pending interrupts + * from this device + * + * May be used as the check_status() entry in ata_port_operations. + * + * LOCKING: + * Inherited from caller. + */ +u8 ata_check_status(struct ata_port *ap) +{ + if (ap->flags & ATA_FLAG_MMIO) + return ata_check_status_mmio(ap); + return ata_check_status_pio(ap); +} + + +/** + * ata_altstatus - Read device alternate status reg + * @ap: port where the device is + * + * Reads ATA taskfile alternate status register for + * currently-selected device and return its value. + * + * Note: may NOT be used as the check_altstatus() entry in + * ata_port_operations. + * + * LOCKING: + * Inherited from caller. + */ +u8 ata_altstatus(struct ata_port *ap) +{ + if (ap->ops->check_altstatus) + return ap->ops->check_altstatus(ap); + + if (ap->flags & ATA_FLAG_MMIO) + return readb((void __iomem *)ap->ioaddr.altstatus_addr); + return inb(ap->ioaddr.altstatus_addr); +} + +#ifdef CONFIG_PCI +static struct ata_probe_ent * +ata_probe_ent_alloc(struct device *dev, const struct ata_port_info *port) +{ + struct ata_probe_ent *probe_ent; + + probe_ent = kzalloc(sizeof(*probe_ent), GFP_KERNEL); + if (!probe_ent) { + printk(KERN_ERR DRV_NAME "(%s): out of memory\n", + kobject_name(&(dev->kobj))); + return NULL; + } + + INIT_LIST_HEAD(&probe_ent->node); + probe_ent->dev = dev; + + probe_ent->sht = port->sht; + probe_ent->host_flags = port->host_flags; + probe_ent->pio_mask = port->pio_mask; + probe_ent->mwdma_mask = port->mwdma_mask; + probe_ent->udma_mask = port->udma_mask; + probe_ent->port_ops = port->port_ops; + + return probe_ent; +} + + +/** + * ata_pci_init_native_mode - Initialize native-mode driver + * @pdev: pci device to be initialized + * @port: array[2] of pointers to port info structures. + * @ports: bitmap of ports present + * + * Utility function which allocates and initializes an + * ata_probe_ent structure for a standard dual-port + * PIO-based IDE controller. The returned ata_probe_ent + * structure can be passed to ata_device_add(). The returned + * ata_probe_ent structure should then be freed with kfree(). + * + * The caller need only pass the address of the primary port, the + * secondary will be deduced automatically. If the device has non + * standard secondary port mappings this function can be called twice, + * once for each interface. + */ + +struct ata_probe_ent * +ata_pci_init_native_mode(struct pci_dev *pdev, struct ata_port_info **port, int ports) +{ + struct ata_probe_ent *probe_ent = + ata_probe_ent_alloc(pci_dev_to_dev(pdev), port[0]); + int p = 0; + + if (!probe_ent) + return NULL; + + probe_ent->irq = pdev->irq; + probe_ent->irq_flags = SA_SHIRQ; + probe_ent->private_data = port[0]->private_data; + + if (ports & ATA_PORT_PRIMARY) { + probe_ent->port[p].cmd_addr = pci_resource_start(pdev, 0); + probe_ent->port[p].altstatus_addr = + probe_ent->port[p].ctl_addr = + pci_resource_start(pdev, 1) | ATA_PCI_CTL_OFS; + probe_ent->port[p].bmdma_addr = pci_resource_start(pdev, 4); + ata_std_ports(&probe_ent->port[p]); + p++; + } + + if (ports & ATA_PORT_SECONDARY) { + probe_ent->port[p].cmd_addr = pci_resource_start(pdev, 2); + probe_ent->port[p].altstatus_addr = + probe_ent->port[p].ctl_addr = + pci_resource_start(pdev, 3) | ATA_PCI_CTL_OFS; + probe_ent->port[p].bmdma_addr = pci_resource_start(pdev, 4) + 8; + ata_std_ports(&probe_ent->port[p]); + p++; + } + + probe_ent->n_ports = p; + return probe_ent; +} + + +static struct ata_probe_ent *ata_pci_init_legacy_port(struct pci_dev *pdev, + struct ata_port_info *port, int port_num) +{ + struct ata_probe_ent *probe_ent; + + probe_ent = ata_probe_ent_alloc(pci_dev_to_dev(pdev), port); + if (!probe_ent) + return NULL; + + probe_ent->legacy_mode = 1; + probe_ent->n_ports = 1; + probe_ent->hard_port_no = port_num; + probe_ent->private_data = port->private_data; + + switch(port_num) + { + case 0: + probe_ent->irq = 14; + probe_ent->port[0].cmd_addr = 0x1f0; + probe_ent->port[0].altstatus_addr = + probe_ent->port[0].ctl_addr = 0x3f6; + break; + case 1: + probe_ent->irq = 15; + probe_ent->port[0].cmd_addr = 0x170; + probe_ent->port[0].altstatus_addr = + probe_ent->port[0].ctl_addr = 0x376; + break; + } + + probe_ent->port[0].bmdma_addr = + pci_resource_start(pdev, 4) + 8 * port_num; + ata_std_ports(&probe_ent->port[0]); + + return probe_ent; +} + + +/** + * ata_pci_init_one - Initialize/register PCI IDE host controller + * @pdev: Controller to be initialized + * @port_info: Information from low-level host driver + * @n_ports: Number of ports attached to host controller + * + * This is a helper function which can be called from a driver's + * xxx_init_one() probe function if the hardware uses traditional + * IDE taskfile registers. + * + * This function calls pci_enable_device(), reserves its register + * regions, sets the dma mask, enables bus master mode, and calls + * ata_device_add() + * + * LOCKING: + * Inherited from PCI layer (may sleep). + * + * RETURNS: + * Zero on success, negative on errno-based value on error. + */ + +int ata_pci_init_one (struct pci_dev *pdev, struct ata_port_info **port_info, + unsigned int n_ports) +{ + struct ata_probe_ent *probe_ent = NULL, *probe_ent2 = NULL; + struct ata_port_info *port[2]; + u8 tmp8, mask; + unsigned int legacy_mode = 0; + int disable_dev_on_err = 1; + int rc; + + DPRINTK("ENTER\n"); + + port[0] = port_info[0]; + if (n_ports > 1) + port[1] = port_info[1]; + else + port[1] = port[0]; + + if ((port[0]->host_flags & ATA_FLAG_NO_LEGACY) == 0 + && (pdev->class >> 8) == PCI_CLASS_STORAGE_IDE) { + /* TODO: What if one channel is in native mode ... */ + pci_read_config_byte(pdev, PCI_CLASS_PROG, &tmp8); + mask = (1 << 2) | (1 << 0); + if ((tmp8 & mask) != mask) + legacy_mode = (1 << 3); + } + + /* FIXME... */ + if ((!legacy_mode) && (n_ports > 2)) { + printk(KERN_ERR "ata: BUG: native mode, n_ports > 2\n"); + n_ports = 2; + /* For now */ + } + + /* FIXME: Really for ATA it isn't safe because the device may be + multi-purpose and we want to leave it alone if it was already + enabled. Secondly for shared use as Arjan says we want refcounting + + Checking dev->is_enabled is insufficient as this is not set at + boot for the primary video which is BIOS enabled + */ + + rc = pci_enable_device(pdev); + if (rc) + return rc; + + rc = pci_request_regions(pdev, DRV_NAME); + if (rc) { + disable_dev_on_err = 0; + goto err_out; + } + + /* FIXME: Should use platform specific mappers for legacy port ranges */ + if (legacy_mode) { + if (!request_region(0x1f0, 8, "libata")) { + struct resource *conflict, res; + res.start = 0x1f0; + res.end = 0x1f0 + 8 - 1; + conflict = ____request_resource(&ioport_resource, &res); + if (!strcmp(conflict->name, "libata")) + legacy_mode |= (1 << 0); + else { + disable_dev_on_err = 0; + printk(KERN_WARNING "ata: 0x1f0 IDE port busy\n"); + } + } else + legacy_mode |= (1 << 0); + + if (!request_region(0x170, 8, "libata")) { + struct resource *conflict, res; + res.start = 0x170; + res.end = 0x170 + 8 - 1; + conflict = ____request_resource(&ioport_resource, &res); + if (!strcmp(conflict->name, "libata")) + legacy_mode |= (1 << 1); + else { + disable_dev_on_err = 0; + printk(KERN_WARNING "ata: 0x170 IDE port busy\n"); + } + } else + legacy_mode |= (1 << 1); + } + + /* we have legacy mode, but all ports are unavailable */ + if (legacy_mode == (1 << 3)) { + rc = -EBUSY; + goto err_out_regions; + } + + rc = pci_set_dma_mask(pdev, ATA_DMA_MASK); + if (rc) + goto err_out_regions; + rc = pci_set_consistent_dma_mask(pdev, ATA_DMA_MASK); + if (rc) + goto err_out_regions; + + if (legacy_mode) { + if (legacy_mode & (1 << 0)) + probe_ent = ata_pci_init_legacy_port(pdev, port[0], 0); + if (legacy_mode & (1 << 1)) + probe_ent2 = ata_pci_init_legacy_port(pdev, port[1], 1); + } else { + if (n_ports == 2) + probe_ent = ata_pci_init_native_mode(pdev, port, ATA_PORT_PRIMARY | ATA_PORT_SECONDARY); + else + probe_ent = ata_pci_init_native_mode(pdev, port, ATA_PORT_PRIMARY); + } + if (!probe_ent && !probe_ent2) { + rc = -ENOMEM; + goto err_out_regions; + } + + pci_set_master(pdev); + + /* FIXME: check ata_device_add return */ + if (legacy_mode) { + if (legacy_mode & (1 << 0)) + ata_device_add(probe_ent); + if (legacy_mode & (1 << 1)) + ata_device_add(probe_ent2); + } else + ata_device_add(probe_ent); + + kfree(probe_ent); + kfree(probe_ent2); + + return 0; + +err_out_regions: + if (legacy_mode & (1 << 0)) + release_region(0x1f0, 8); + if (legacy_mode & (1 << 1)) + release_region(0x170, 8); + pci_release_regions(pdev); +err_out: + if (disable_dev_on_err) + pci_disable_device(pdev); + return rc; +} + +#endif /* CONFIG_PCI */ + diff --git a/drivers/scsi/libata-core.c b/drivers/scsi/libata-core.c index 14cdbb336dd5..22db73932253 100644 --- a/drivers/scsi/libata-core.c +++ b/drivers/scsi/libata-core.c @@ -83,403 +83,6 @@ MODULE_DESCRIPTION("Library module for ATA devices"); MODULE_LICENSE("GPL"); MODULE_VERSION(DRV_VERSION); -/** - * ata_tf_load_pio - send taskfile registers to host controller - * @ap: Port to which output is sent - * @tf: ATA taskfile register set - * - * Outputs ATA taskfile to standard ATA host controller. - * - * LOCKING: - * Inherited from caller. - */ - -static void ata_tf_load_pio(struct ata_port *ap, const struct ata_taskfile *tf) -{ - struct ata_ioports *ioaddr = &ap->ioaddr; - unsigned int is_addr = tf->flags & ATA_TFLAG_ISADDR; - - if (tf->ctl != ap->last_ctl) { - outb(tf->ctl, ioaddr->ctl_addr); - ap->last_ctl = tf->ctl; - ata_wait_idle(ap); - } - - if (is_addr && (tf->flags & ATA_TFLAG_LBA48)) { - outb(tf->hob_feature, ioaddr->feature_addr); - outb(tf->hob_nsect, ioaddr->nsect_addr); - outb(tf->hob_lbal, ioaddr->lbal_addr); - outb(tf->hob_lbam, ioaddr->lbam_addr); - outb(tf->hob_lbah, ioaddr->lbah_addr); - VPRINTK("hob: feat 0x%X nsect 0x%X, lba 0x%X 0x%X 0x%X\n", - tf->hob_feature, - tf->hob_nsect, - tf->hob_lbal, - tf->hob_lbam, - tf->hob_lbah); - } - - if (is_addr) { - outb(tf->feature, ioaddr->feature_addr); - outb(tf->nsect, ioaddr->nsect_addr); - outb(tf->lbal, ioaddr->lbal_addr); - outb(tf->lbam, ioaddr->lbam_addr); - outb(tf->lbah, ioaddr->lbah_addr); - VPRINTK("feat 0x%X nsect 0x%X lba 0x%X 0x%X 0x%X\n", - tf->feature, - tf->nsect, - tf->lbal, - tf->lbam, - tf->lbah); - } - - if (tf->flags & ATA_TFLAG_DEVICE) { - outb(tf->device, ioaddr->device_addr); - VPRINTK("device 0x%X\n", tf->device); - } - - ata_wait_idle(ap); -} - -/** - * ata_tf_load_mmio - send taskfile registers to host controller - * @ap: Port to which output is sent - * @tf: ATA taskfile register set - * - * Outputs ATA taskfile to standard ATA host controller using MMIO. - * - * LOCKING: - * Inherited from caller. - */ - -static void ata_tf_load_mmio(struct ata_port *ap, const struct ata_taskfile *tf) -{ - struct ata_ioports *ioaddr = &ap->ioaddr; - unsigned int is_addr = tf->flags & ATA_TFLAG_ISADDR; - - if (tf->ctl != ap->last_ctl) { - writeb(tf->ctl, (void __iomem *) ap->ioaddr.ctl_addr); - ap->last_ctl = tf->ctl; - ata_wait_idle(ap); - } - - if (is_addr && (tf->flags & ATA_TFLAG_LBA48)) { - writeb(tf->hob_feature, (void __iomem *) ioaddr->feature_addr); - writeb(tf->hob_nsect, (void __iomem *) ioaddr->nsect_addr); - writeb(tf->hob_lbal, (void __iomem *) ioaddr->lbal_addr); - writeb(tf->hob_lbam, (void __iomem *) ioaddr->lbam_addr); - writeb(tf->hob_lbah, (void __iomem *) ioaddr->lbah_addr); - VPRINTK("hob: feat 0x%X nsect 0x%X, lba 0x%X 0x%X 0x%X\n", - tf->hob_feature, - tf->hob_nsect, - tf->hob_lbal, - tf->hob_lbam, - tf->hob_lbah); - } - - if (is_addr) { - writeb(tf->feature, (void __iomem *) ioaddr->feature_addr); - writeb(tf->nsect, (void __iomem *) ioaddr->nsect_addr); - writeb(tf->lbal, (void __iomem *) ioaddr->lbal_addr); - writeb(tf->lbam, (void __iomem *) ioaddr->lbam_addr); - writeb(tf->lbah, (void __iomem *) ioaddr->lbah_addr); - VPRINTK("feat 0x%X nsect 0x%X lba 0x%X 0x%X 0x%X\n", - tf->feature, - tf->nsect, - tf->lbal, - tf->lbam, - tf->lbah); - } - - if (tf->flags & ATA_TFLAG_DEVICE) { - writeb(tf->device, (void __iomem *) ioaddr->device_addr); - VPRINTK("device 0x%X\n", tf->device); - } - - ata_wait_idle(ap); -} - - -/** - * ata_tf_load - send taskfile registers to host controller - * @ap: Port to which output is sent - * @tf: ATA taskfile register set - * - * Outputs ATA taskfile to standard ATA host controller using MMIO - * or PIO as indicated by the ATA_FLAG_MMIO flag. - * Writes the control, feature, nsect, lbal, lbam, and lbah registers. - * Optionally (ATA_TFLAG_LBA48) writes hob_feature, hob_nsect, - * hob_lbal, hob_lbam, and hob_lbah. - * - * This function waits for idle (!BUSY and !DRQ) after writing - * registers. If the control register has a new value, this - * function also waits for idle after writing control and before - * writing the remaining registers. - * - * May be used as the tf_load() entry in ata_port_operations. - * - * LOCKING: - * Inherited from caller. - */ -void ata_tf_load(struct ata_port *ap, const struct ata_taskfile *tf) -{ - if (ap->flags & ATA_FLAG_MMIO) - ata_tf_load_mmio(ap, tf); - else - ata_tf_load_pio(ap, tf); -} - -/** - * ata_exec_command_pio - issue ATA command to host controller - * @ap: port to which command is being issued - * @tf: ATA taskfile register set - * - * Issues PIO write to ATA command register, with proper - * synchronization with interrupt handler / other threads. - * - * LOCKING: - * spin_lock_irqsave(host_set lock) - */ - -static void ata_exec_command_pio(struct ata_port *ap, const struct ata_taskfile *tf) -{ - DPRINTK("ata%u: cmd 0x%X\n", ap->id, tf->command); - - outb(tf->command, ap->ioaddr.command_addr); - ata_pause(ap); -} - - -/** - * ata_exec_command_mmio - issue ATA command to host controller - * @ap: port to which command is being issued - * @tf: ATA taskfile register set - * - * Issues MMIO write to ATA command register, with proper - * synchronization with interrupt handler / other threads. - * - * LOCKING: - * spin_lock_irqsave(host_set lock) - */ - -static void ata_exec_command_mmio(struct ata_port *ap, const struct ata_taskfile *tf) -{ - DPRINTK("ata%u: cmd 0x%X\n", ap->id, tf->command); - - writeb(tf->command, (void __iomem *) ap->ioaddr.command_addr); - ata_pause(ap); -} - - -/** - * ata_exec_command - issue ATA command to host controller - * @ap: port to which command is being issued - * @tf: ATA taskfile register set - * - * Issues PIO/MMIO write to ATA command register, with proper - * synchronization with interrupt handler / other threads. - * - * LOCKING: - * spin_lock_irqsave(host_set lock) - */ -void ata_exec_command(struct ata_port *ap, const struct ata_taskfile *tf) -{ - if (ap->flags & ATA_FLAG_MMIO) - ata_exec_command_mmio(ap, tf); - else - ata_exec_command_pio(ap, tf); -} - -/** - * ata_tf_to_host - issue ATA taskfile to host controller - * @ap: port to which command is being issued - * @tf: ATA taskfile register set - * - * Issues ATA taskfile register set to ATA host controller, - * with proper synchronization with interrupt handler and - * other threads. - * - * LOCKING: - * spin_lock_irqsave(host_set lock) - */ - -static inline void ata_tf_to_host(struct ata_port *ap, - const struct ata_taskfile *tf) -{ - ap->ops->tf_load(ap, tf); - ap->ops->exec_command(ap, tf); -} - -/** - * ata_tf_read_pio - input device's ATA taskfile shadow registers - * @ap: Port from which input is read - * @tf: ATA taskfile register set for storing input - * - * Reads ATA taskfile registers for currently-selected device - * into @tf. - * - * LOCKING: - * Inherited from caller. - */ - -static void ata_tf_read_pio(struct ata_port *ap, struct ata_taskfile *tf) -{ - struct ata_ioports *ioaddr = &ap->ioaddr; - - tf->command = ata_check_status(ap); - tf->feature = inb(ioaddr->error_addr); - tf->nsect = inb(ioaddr->nsect_addr); - tf->lbal = inb(ioaddr->lbal_addr); - tf->lbam = inb(ioaddr->lbam_addr); - tf->lbah = inb(ioaddr->lbah_addr); - tf->device = inb(ioaddr->device_addr); - - if (tf->flags & ATA_TFLAG_LBA48) { - outb(tf->ctl | ATA_HOB, ioaddr->ctl_addr); - tf->hob_feature = inb(ioaddr->error_addr); - tf->hob_nsect = inb(ioaddr->nsect_addr); - tf->hob_lbal = inb(ioaddr->lbal_addr); - tf->hob_lbam = inb(ioaddr->lbam_addr); - tf->hob_lbah = inb(ioaddr->lbah_addr); - } -} - -/** - * ata_tf_read_mmio - input device's ATA taskfile shadow registers - * @ap: Port from which input is read - * @tf: ATA taskfile register set for storing input - * - * Reads ATA taskfile registers for currently-selected device - * into @tf via MMIO. - * - * LOCKING: - * Inherited from caller. - */ - -static void ata_tf_read_mmio(struct ata_port *ap, struct ata_taskfile *tf) -{ - struct ata_ioports *ioaddr = &ap->ioaddr; - - tf->command = ata_check_status(ap); - tf->feature = readb((void __iomem *)ioaddr->error_addr); - tf->nsect = readb((void __iomem *)ioaddr->nsect_addr); - tf->lbal = readb((void __iomem *)ioaddr->lbal_addr); - tf->lbam = readb((void __iomem *)ioaddr->lbam_addr); - tf->lbah = readb((void __iomem *)ioaddr->lbah_addr); - tf->device = readb((void __iomem *)ioaddr->device_addr); - - if (tf->flags & ATA_TFLAG_LBA48) { - writeb(tf->ctl | ATA_HOB, (void __iomem *) ap->ioaddr.ctl_addr); - tf->hob_feature = readb((void __iomem *)ioaddr->error_addr); - tf->hob_nsect = readb((void __iomem *)ioaddr->nsect_addr); - tf->hob_lbal = readb((void __iomem *)ioaddr->lbal_addr); - tf->hob_lbam = readb((void __iomem *)ioaddr->lbam_addr); - tf->hob_lbah = readb((void __iomem *)ioaddr->lbah_addr); - } -} - - -/** - * ata_tf_read - input device's ATA taskfile shadow registers - * @ap: Port from which input is read - * @tf: ATA taskfile register set for storing input - * - * Reads ATA taskfile registers for currently-selected device - * into @tf. - * - * Reads nsect, lbal, lbam, lbah, and device. If ATA_TFLAG_LBA48 - * is set, also reads the hob registers. - * - * May be used as the tf_read() entry in ata_port_operations. - * - * LOCKING: - * Inherited from caller. - */ -void ata_tf_read(struct ata_port *ap, struct ata_taskfile *tf) -{ - if (ap->flags & ATA_FLAG_MMIO) - ata_tf_read_mmio(ap, tf); - else - ata_tf_read_pio(ap, tf); -} - -/** - * ata_check_status_pio - Read device status reg & clear interrupt - * @ap: port where the device is - * - * Reads ATA taskfile status register for currently-selected device - * and return its value. This also clears pending interrupts - * from this device - * - * LOCKING: - * Inherited from caller. - */ -static u8 ata_check_status_pio(struct ata_port *ap) -{ - return inb(ap->ioaddr.status_addr); -} - -/** - * ata_check_status_mmio - Read device status reg & clear interrupt - * @ap: port where the device is - * - * Reads ATA taskfile status register for currently-selected device - * via MMIO and return its value. This also clears pending interrupts - * from this device - * - * LOCKING: - * Inherited from caller. - */ -static u8 ata_check_status_mmio(struct ata_port *ap) -{ - return readb((void __iomem *) ap->ioaddr.status_addr); -} - - -/** - * ata_check_status - Read device status reg & clear interrupt - * @ap: port where the device is - * - * Reads ATA taskfile status register for currently-selected device - * and return its value. This also clears pending interrupts - * from this device - * - * May be used as the check_status() entry in ata_port_operations. - * - * LOCKING: - * Inherited from caller. - */ -u8 ata_check_status(struct ata_port *ap) -{ - if (ap->flags & ATA_FLAG_MMIO) - return ata_check_status_mmio(ap); - return ata_check_status_pio(ap); -} - - -/** - * ata_altstatus - Read device alternate status reg - * @ap: port where the device is - * - * Reads ATA taskfile alternate status register for - * currently-selected device and return its value. - * - * Note: may NOT be used as the check_altstatus() entry in - * ata_port_operations. - * - * LOCKING: - * Inherited from caller. - */ -u8 ata_altstatus(struct ata_port *ap) -{ - if (ap->ops->check_altstatus) - return ap->ops->check_altstatus(ap); - - if (ap->flags & ATA_FLAG_MMIO) - return readb((void __iomem *)ap->ioaddr.altstatus_addr); - return inb(ap->ioaddr.altstatus_addr); -} - /** * ata_tf_to_fis - Convert ATA taskfile to SATA FIS structure @@ -2008,6 +1611,26 @@ err_out: ata_port_disable(ap); } +/** + * ata_tf_to_host - issue ATA taskfile to host controller + * @ap: port to which command is being issued + * @tf: ATA taskfile register set + * + * Issues ATA taskfile register set to ATA host controller, + * with proper synchronization with interrupt handler and + * other threads. + * + * LOCKING: + * spin_lock_irqsave(host_set lock) + */ + +static inline void ata_tf_to_host(struct ata_port *ap, + const struct ata_taskfile *tf) +{ + ap->ops->tf_load(ap, tf); + ap->ops->exec_command(ap, tf); +} + /** * ata_busy_sleep - sleep until BSY clears, or timeout * @ap: port containing status register to be polled @@ -5106,32 +4729,6 @@ void ata_std_ports(struct ata_ioports *ioaddr) ioaddr->command_addr = ioaddr->cmd_addr + ATA_REG_CMD; } -static struct ata_probe_ent * -ata_probe_ent_alloc(struct device *dev, const struct ata_port_info *port) -{ - struct ata_probe_ent *probe_ent; - - probe_ent = kzalloc(sizeof(*probe_ent), GFP_KERNEL); - if (!probe_ent) { - printk(KERN_ERR DRV_NAME "(%s): out of memory\n", - kobject_name(&(dev->kobj))); - return NULL; - } - - INIT_LIST_HEAD(&probe_ent->node); - probe_ent->dev = dev; - - probe_ent->sht = port->sht; - probe_ent->host_flags = port->host_flags; - probe_ent->pio_mask = port->pio_mask; - probe_ent->mwdma_mask = port->mwdma_mask; - probe_ent->udma_mask = port->udma_mask; - probe_ent->port_ops = port->port_ops; - - return probe_ent; -} - - #ifdef CONFIG_PCI @@ -5142,256 +4739,6 @@ void ata_pci_host_stop (struct ata_host_set *host_set) pci_iounmap(pdev, host_set->mmio_base); } -/** - * ata_pci_init_native_mode - Initialize native-mode driver - * @pdev: pci device to be initialized - * @port: array[2] of pointers to port info structures. - * @ports: bitmap of ports present - * - * Utility function which allocates and initializes an - * ata_probe_ent structure for a standard dual-port - * PIO-based IDE controller. The returned ata_probe_ent - * structure can be passed to ata_device_add(). The returned - * ata_probe_ent structure should then be freed with kfree(). - * - * The caller need only pass the address of the primary port, the - * secondary will be deduced automatically. If the device has non - * standard secondary port mappings this function can be called twice, - * once for each interface. - */ - -struct ata_probe_ent * -ata_pci_init_native_mode(struct pci_dev *pdev, struct ata_port_info **port, int ports) -{ - struct ata_probe_ent *probe_ent = - ata_probe_ent_alloc(pci_dev_to_dev(pdev), port[0]); - int p = 0; - - if (!probe_ent) - return NULL; - - probe_ent->irq = pdev->irq; - probe_ent->irq_flags = SA_SHIRQ; - probe_ent->private_data = port[0]->private_data; - - if (ports & ATA_PORT_PRIMARY) { - probe_ent->port[p].cmd_addr = pci_resource_start(pdev, 0); - probe_ent->port[p].altstatus_addr = - probe_ent->port[p].ctl_addr = - pci_resource_start(pdev, 1) | ATA_PCI_CTL_OFS; - probe_ent->port[p].bmdma_addr = pci_resource_start(pdev, 4); - ata_std_ports(&probe_ent->port[p]); - p++; - } - - if (ports & ATA_PORT_SECONDARY) { - probe_ent->port[p].cmd_addr = pci_resource_start(pdev, 2); - probe_ent->port[p].altstatus_addr = - probe_ent->port[p].ctl_addr = - pci_resource_start(pdev, 3) | ATA_PCI_CTL_OFS; - probe_ent->port[p].bmdma_addr = pci_resource_start(pdev, 4) + 8; - ata_std_ports(&probe_ent->port[p]); - p++; - } - - probe_ent->n_ports = p; - return probe_ent; -} - -static struct ata_probe_ent *ata_pci_init_legacy_port(struct pci_dev *pdev, struct ata_port_info *port, int port_num) -{ - struct ata_probe_ent *probe_ent; - - probe_ent = ata_probe_ent_alloc(pci_dev_to_dev(pdev), port); - if (!probe_ent) - return NULL; - - probe_ent->legacy_mode = 1; - probe_ent->n_ports = 1; - probe_ent->hard_port_no = port_num; - probe_ent->private_data = port->private_data; - - switch(port_num) - { - case 0: - probe_ent->irq = 14; - probe_ent->port[0].cmd_addr = 0x1f0; - probe_ent->port[0].altstatus_addr = - probe_ent->port[0].ctl_addr = 0x3f6; - break; - case 1: - probe_ent->irq = 15; - probe_ent->port[0].cmd_addr = 0x170; - probe_ent->port[0].altstatus_addr = - probe_ent->port[0].ctl_addr = 0x376; - break; - } - probe_ent->port[0].bmdma_addr = pci_resource_start(pdev, 4) + 8 * port_num; - ata_std_ports(&probe_ent->port[0]); - return probe_ent; -} - -/** - * ata_pci_init_one - Initialize/register PCI IDE host controller - * @pdev: Controller to be initialized - * @port_info: Information from low-level host driver - * @n_ports: Number of ports attached to host controller - * - * This is a helper function which can be called from a driver's - * xxx_init_one() probe function if the hardware uses traditional - * IDE taskfile registers. - * - * This function calls pci_enable_device(), reserves its register - * regions, sets the dma mask, enables bus master mode, and calls - * ata_device_add() - * - * LOCKING: - * Inherited from PCI layer (may sleep). - * - * RETURNS: - * Zero on success, negative on errno-based value on error. - */ - -int ata_pci_init_one (struct pci_dev *pdev, struct ata_port_info **port_info, - unsigned int n_ports) -{ - struct ata_probe_ent *probe_ent = NULL, *probe_ent2 = NULL; - struct ata_port_info *port[2]; - u8 tmp8, mask; - unsigned int legacy_mode = 0; - int disable_dev_on_err = 1; - int rc; - - DPRINTK("ENTER\n"); - - port[0] = port_info[0]; - if (n_ports > 1) - port[1] = port_info[1]; - else - port[1] = port[0]; - - if ((port[0]->host_flags & ATA_FLAG_NO_LEGACY) == 0 - && (pdev->class >> 8) == PCI_CLASS_STORAGE_IDE) { - /* TODO: What if one channel is in native mode ... */ - pci_read_config_byte(pdev, PCI_CLASS_PROG, &tmp8); - mask = (1 << 2) | (1 << 0); - if ((tmp8 & mask) != mask) - legacy_mode = (1 << 3); - } - - /* FIXME... */ - if ((!legacy_mode) && (n_ports > 2)) { - printk(KERN_ERR "ata: BUG: native mode, n_ports > 2\n"); - n_ports = 2; - /* For now */ - } - - /* FIXME: Really for ATA it isn't safe because the device may be - multi-purpose and we want to leave it alone if it was already - enabled. Secondly for shared use as Arjan says we want refcounting - - Checking dev->is_enabled is insufficient as this is not set at - boot for the primary video which is BIOS enabled - */ - - rc = pci_enable_device(pdev); - if (rc) - return rc; - - rc = pci_request_regions(pdev, DRV_NAME); - if (rc) { - disable_dev_on_err = 0; - goto err_out; - } - - /* FIXME: Should use platform specific mappers for legacy port ranges */ - if (legacy_mode) { - if (!request_region(0x1f0, 8, "libata")) { - struct resource *conflict, res; - res.start = 0x1f0; - res.end = 0x1f0 + 8 - 1; - conflict = ____request_resource(&ioport_resource, &res); - if (!strcmp(conflict->name, "libata")) - legacy_mode |= (1 << 0); - else { - disable_dev_on_err = 0; - printk(KERN_WARNING "ata: 0x1f0 IDE port busy\n"); - } - } else - legacy_mode |= (1 << 0); - - if (!request_region(0x170, 8, "libata")) { - struct resource *conflict, res; - res.start = 0x170; - res.end = 0x170 + 8 - 1; - conflict = ____request_resource(&ioport_resource, &res); - if (!strcmp(conflict->name, "libata")) - legacy_mode |= (1 << 1); - else { - disable_dev_on_err = 0; - printk(KERN_WARNING "ata: 0x170 IDE port busy\n"); - } - } else - legacy_mode |= (1 << 1); - } - - /* we have legacy mode, but all ports are unavailable */ - if (legacy_mode == (1 << 3)) { - rc = -EBUSY; - goto err_out_regions; - } - - rc = pci_set_dma_mask(pdev, ATA_DMA_MASK); - if (rc) - goto err_out_regions; - rc = pci_set_consistent_dma_mask(pdev, ATA_DMA_MASK); - if (rc) - goto err_out_regions; - - if (legacy_mode) { - if (legacy_mode & (1 << 0)) - probe_ent = ata_pci_init_legacy_port(pdev, port[0], 0); - if (legacy_mode & (1 << 1)) - probe_ent2 = ata_pci_init_legacy_port(pdev, port[1], 1); - } else { - if (n_ports == 2) - probe_ent = ata_pci_init_native_mode(pdev, port, ATA_PORT_PRIMARY | ATA_PORT_SECONDARY); - else - probe_ent = ata_pci_init_native_mode(pdev, port, ATA_PORT_PRIMARY); - } - if (!probe_ent && !probe_ent2) { - rc = -ENOMEM; - goto err_out_regions; - } - - pci_set_master(pdev); - - /* FIXME: check ata_device_add return */ - if (legacy_mode) { - if (legacy_mode & (1 << 0)) - ata_device_add(probe_ent); - if (legacy_mode & (1 << 1)) - ata_device_add(probe_ent2); - } else - ata_device_add(probe_ent); - - kfree(probe_ent); - kfree(probe_ent2); - - return 0; - -err_out_regions: - if (legacy_mode & (1 << 0)) - release_region(0x1f0, 8); - if (legacy_mode & (1 << 1)) - release_region(0x170, 8); - pci_release_regions(pdev); -err_out: - if (disable_dev_on_err) - pci_disable_device(pdev); - return rc; -} - /** * ata_pci_remove_one - PCI layer callback for device removal * @pdev: PCI device that was removed -- cgit v1.2.1 From 341963b909a01d2f38d86f5db8dd1f8c80bd6dbf Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Fri, 10 Feb 2006 15:10:48 +0900 Subject: [PATCH] libata: add ATA_QCFLAG_EH_SCHEDULED Add ATA_QCFLAG_EH_SCHEDULED. If this flag is set, the qc is owned by EH and normal completion path is not allowed to finish it. This patch doesn't actually use this flag. Signed-off-by: Tejun Heo Signed-off-by: Jeff Garzik --- drivers/scsi/libata-core.c | 33 ++++++++++++++++++++------------- drivers/scsi/libata-scsi.c | 2 +- drivers/scsi/libata.h | 1 + 3 files changed, 22 insertions(+), 14 deletions(-) (limited to 'drivers/scsi') diff --git a/drivers/scsi/libata-core.c b/drivers/scsi/libata-core.c index 22db73932253..977a53dd1677 100644 --- a/drivers/scsi/libata-core.c +++ b/drivers/scsi/libata-core.c @@ -3620,19 +3620,7 @@ void ata_qc_free(struct ata_queued_cmd *qc) } } -/** - * ata_qc_complete - Complete an active ATA command - * @qc: Command to complete - * @err_mask: ATA Status register contents - * - * Indicate to the mid and upper layers that an ATA - * command has completed, with either an ok or not-ok status. - * - * LOCKING: - * spin_lock_irqsave(host_set lock) - */ - -void ata_qc_complete(struct ata_queued_cmd *qc) +inline void __ata_qc_complete(struct ata_queued_cmd *qc) { assert(qc != NULL); /* ata_qc_from_tag _might_ return NULL */ assert(qc->flags & ATA_QCFLAG_ACTIVE); @@ -3650,6 +3638,25 @@ void ata_qc_complete(struct ata_queued_cmd *qc) qc->complete_fn(qc); } +/** + * ata_qc_complete - Complete an active ATA command + * @qc: Command to complete + * @err_mask: ATA Status register contents + * + * Indicate to the mid and upper layers that an ATA + * command has completed, with either an ok or not-ok status. + * + * LOCKING: + * spin_lock_irqsave(host_set lock) + */ +void ata_qc_complete(struct ata_queued_cmd *qc) +{ + if (unlikely(qc->flags & ATA_QCFLAG_EH_SCHEDULED)) + return; + + __ata_qc_complete(qc); +} + static inline int ata_should_dma_map(struct ata_queued_cmd *qc) { struct ata_port *ap = qc->ap; diff --git a/drivers/scsi/libata-scsi.c b/drivers/scsi/libata-scsi.c index b007bb409382..1df468eb2bf3 100644 --- a/drivers/scsi/libata-scsi.c +++ b/drivers/scsi/libata-scsi.c @@ -770,7 +770,7 @@ static void __ata_eh_qc_complete(struct ata_queued_cmd *qc) spin_lock_irqsave(&ap->host_set->lock, flags); qc->scsidone = ata_eh_scsidone; - ata_qc_complete(qc); + __ata_qc_complete(qc); assert(!ata_tag_valid(qc->tag)); spin_unlock_irqrestore(&ap->host_set->lock, flags); diff --git a/drivers/scsi/libata.h b/drivers/scsi/libata.h index 9d76923a2253..1cd071a32e93 100644 --- a/drivers/scsi/libata.h +++ b/drivers/scsi/libata.h @@ -46,6 +46,7 @@ extern struct ata_queued_cmd *ata_qc_new_init(struct ata_port *ap, extern int ata_rwcmd_protocol(struct ata_queued_cmd *qc); extern void ata_qc_free(struct ata_queued_cmd *qc); extern unsigned int ata_qc_issue(struct ata_queued_cmd *qc); +extern void __ata_qc_complete(struct ata_queued_cmd *qc); extern int ata_check_atapi_dma(struct ata_queued_cmd *qc); extern void ata_dev_select(struct ata_port *ap, unsigned int device, unsigned int wait, unsigned int can_sleep); -- cgit v1.2.1 From f29841e08fa20a7f2c8bc1b70306975299c66ee7 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Fri, 10 Feb 2006 15:10:48 +0900 Subject: [PATCH] libata: implement ata_scsi_timed_out() Implement ata_scsi_timed_out(), to be used as scsi_host_template->eh_timed_out callback for all libata drivers. Without this function, the following race exists. If a qc completes after SCSI timer expires but before libata EH kicks in, the qc gets completed but the scsicmd still gets passed to libata EH resulting in ->eng_timeout invocation with NULL qc, which none is handling properly. This patch makes sure that scmd and qc share the same lifetime. Original idea from Jeff Garzik . Signed-off-by: Tejun Heo Signed-off-by: Jeff Garzik --- drivers/scsi/libata-core.c | 1 + drivers/scsi/libata-scsi.c | 41 +++++++++++++++++++++++++++++++++++++++++ 2 files changed, 42 insertions(+) (limited to 'drivers/scsi') diff --git a/drivers/scsi/libata-core.c b/drivers/scsi/libata-core.c index 977a53dd1677..d53e0bce2bec 100644 --- a/drivers/scsi/libata-core.c +++ b/drivers/scsi/libata-core.c @@ -4913,6 +4913,7 @@ EXPORT_SYMBOL_GPL(ata_ratelimit); EXPORT_SYMBOL_GPL(ata_busy_sleep); EXPORT_SYMBOL_GPL(ata_scsi_ioctl); EXPORT_SYMBOL_GPL(ata_scsi_queuecmd); +EXPORT_SYMBOL_GPL(ata_scsi_timed_out); EXPORT_SYMBOL_GPL(ata_scsi_error); EXPORT_SYMBOL_GPL(ata_scsi_slave_config); EXPORT_SYMBOL_GPL(ata_scsi_release); diff --git a/drivers/scsi/libata-scsi.c b/drivers/scsi/libata-scsi.c index 1df468eb2bf3..d67cc2fb5694 100644 --- a/drivers/scsi/libata-scsi.c +++ b/drivers/scsi/libata-scsi.c @@ -716,6 +716,47 @@ int ata_scsi_slave_config(struct scsi_device *sdev) return 0; /* scsi layer doesn't check return value, sigh */ } +/** + * ata_scsi_timed_out - SCSI layer time out callback + * @cmd: timed out SCSI command + * + * Handles SCSI layer timeout. We race with normal completion of + * the qc for @cmd. If the qc is already gone, we lose and let + * the scsi command finish (EH_HANDLED). Otherwise, the qc has + * timed out and EH should be invoked. Prevent ata_qc_complete() + * from finishing it by setting EH_SCHEDULED and return + * EH_NOT_HANDLED. + * + * LOCKING: + * Called from timer context + * + * RETURNS: + * EH_HANDLED or EH_NOT_HANDLED + */ +enum scsi_eh_timer_return ata_scsi_timed_out(struct scsi_cmnd *cmd) +{ + struct Scsi_Host *host = cmd->device->host; + struct ata_port *ap = (struct ata_port *) &host->hostdata[0]; + unsigned long flags; + struct ata_queued_cmd *qc; + enum scsi_eh_timer_return ret = EH_HANDLED; + + DPRINTK("ENTER\n"); + + spin_lock_irqsave(&ap->host_set->lock, flags); + qc = ata_qc_from_tag(ap, ap->active_tag); + if (qc) { + assert(qc->scsicmd == cmd); + qc->flags |= ATA_QCFLAG_EH_SCHEDULED; + qc->err_mask |= AC_ERR_TIMEOUT; + ret = EH_NOT_HANDLED; + } + spin_unlock_irqrestore(&ap->host_set->lock, flags); + + DPRINTK("EXIT, ret=%d\n", ret); + return ret; +} + /** * ata_scsi_error - SCSI layer error handler callback * @host: SCSI host on which error occurred -- cgit v1.2.1 From 35daeb8f9b41fd13180e8a6f8bec9fc5268938f9 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Fri, 10 Feb 2006 15:10:48 +0900 Subject: [PATCH] libata: use ata_scsi_timed_out() Make all libata low level drivers use ata_scsi_timed_out(). Signed-off-by: Tejun Heo Signed-off-by: Jeff Garzik --- drivers/scsi/ahci.c | 1 + drivers/scsi/ata_piix.c | 1 + drivers/scsi/pdc_adma.c | 1 + drivers/scsi/sata_mv.c | 1 + drivers/scsi/sata_nv.c | 1 + drivers/scsi/sata_promise.c | 1 + drivers/scsi/sata_qstor.c | 1 + drivers/scsi/sata_sil.c | 1 + drivers/scsi/sata_sil24.c | 1 + drivers/scsi/sata_sis.c | 1 + drivers/scsi/sata_svw.c | 1 + drivers/scsi/sata_sx4.c | 1 + drivers/scsi/sata_uli.c | 1 + drivers/scsi/sata_via.c | 1 + drivers/scsi/sata_vsc.c | 1 + 15 files changed, 15 insertions(+) (limited to 'drivers/scsi') diff --git a/drivers/scsi/ahci.c b/drivers/scsi/ahci.c index c840d5ec12a7..c67189a4e0b1 100644 --- a/drivers/scsi/ahci.c +++ b/drivers/scsi/ahci.c @@ -206,6 +206,7 @@ static struct scsi_host_template ahci_sht = { .name = DRV_NAME, .ioctl = ata_scsi_ioctl, .queuecommand = ata_scsi_queuecmd, + .eh_timed_out = ata_scsi_timed_out, .eh_strategy_handler = ata_scsi_error, .can_queue = ATA_DEF_QUEUE, .this_id = ATA_SHT_THIS_ID, diff --git a/drivers/scsi/ata_piix.c b/drivers/scsi/ata_piix.c index 49cc4209fe16..4933ba284885 100644 --- a/drivers/scsi/ata_piix.c +++ b/drivers/scsi/ata_piix.c @@ -180,6 +180,7 @@ static struct scsi_host_template piix_sht = { .name = DRV_NAME, .ioctl = ata_scsi_ioctl, .queuecommand = ata_scsi_queuecmd, + .eh_timed_out = ata_scsi_timed_out, .eh_strategy_handler = ata_scsi_error, .can_queue = ATA_DEF_QUEUE, .this_id = ATA_SHT_THIS_ID, diff --git a/drivers/scsi/pdc_adma.c b/drivers/scsi/pdc_adma.c index 3a6bf58dc37b..d0ad3ebe9685 100644 --- a/drivers/scsi/pdc_adma.c +++ b/drivers/scsi/pdc_adma.c @@ -143,6 +143,7 @@ static struct scsi_host_template adma_ata_sht = { .name = DRV_NAME, .ioctl = ata_scsi_ioctl, .queuecommand = ata_scsi_queuecmd, + .eh_timed_out = ata_scsi_timed_out, .eh_strategy_handler = ata_scsi_error, .can_queue = ATA_DEF_QUEUE, .this_id = ATA_SHT_THIS_ID, diff --git a/drivers/scsi/sata_mv.c b/drivers/scsi/sata_mv.c index 3e916327ae37..1db05f23f12f 100644 --- a/drivers/scsi/sata_mv.c +++ b/drivers/scsi/sata_mv.c @@ -378,6 +378,7 @@ static struct scsi_host_template mv_sht = { .name = DRV_NAME, .ioctl = ata_scsi_ioctl, .queuecommand = ata_scsi_queuecmd, + .eh_timed_out = ata_scsi_timed_out, .eh_strategy_handler = ata_scsi_error, .can_queue = MV_USE_Q_DEPTH, .this_id = ATA_SHT_THIS_ID, diff --git a/drivers/scsi/sata_nv.c b/drivers/scsi/sata_nv.c index bbbb55eeb73a..cdfeb9aa600b 100644 --- a/drivers/scsi/sata_nv.c +++ b/drivers/scsi/sata_nv.c @@ -229,6 +229,7 @@ static struct scsi_host_template nv_sht = { .name = DRV_NAME, .ioctl = ata_scsi_ioctl, .queuecommand = ata_scsi_queuecmd, + .eh_timed_out = ata_scsi_timed_out, .eh_strategy_handler = ata_scsi_error, .can_queue = ATA_DEF_QUEUE, .this_id = ATA_SHT_THIS_ID, diff --git a/drivers/scsi/sata_promise.c b/drivers/scsi/sata_promise.c index 0950a8e45814..5d4ed54d9452 100644 --- a/drivers/scsi/sata_promise.c +++ b/drivers/scsi/sata_promise.c @@ -111,6 +111,7 @@ static struct scsi_host_template pdc_ata_sht = { .name = DRV_NAME, .ioctl = ata_scsi_ioctl, .queuecommand = ata_scsi_queuecmd, + .eh_timed_out = ata_scsi_timed_out, .eh_strategy_handler = ata_scsi_error, .can_queue = ATA_DEF_QUEUE, .this_id = ATA_SHT_THIS_ID, diff --git a/drivers/scsi/sata_qstor.c b/drivers/scsi/sata_qstor.c index 2afbeb77f6fe..82c3df7048ea 100644 --- a/drivers/scsi/sata_qstor.c +++ b/drivers/scsi/sata_qstor.c @@ -132,6 +132,7 @@ static struct scsi_host_template qs_ata_sht = { .name = DRV_NAME, .ioctl = ata_scsi_ioctl, .queuecommand = ata_scsi_queuecmd, + .eh_timed_out = ata_scsi_timed_out, .eh_strategy_handler = ata_scsi_error, .can_queue = ATA_DEF_QUEUE, .this_id = ATA_SHT_THIS_ID, diff --git a/drivers/scsi/sata_sil.c b/drivers/scsi/sata_sil.c index 17f74d3c10e7..f40f25edbb11 100644 --- a/drivers/scsi/sata_sil.c +++ b/drivers/scsi/sata_sil.c @@ -135,6 +135,7 @@ static struct scsi_host_template sil_sht = { .name = DRV_NAME, .ioctl = ata_scsi_ioctl, .queuecommand = ata_scsi_queuecmd, + .eh_timed_out = ata_scsi_timed_out, .eh_strategy_handler = ata_scsi_error, .can_queue = ATA_DEF_QUEUE, .this_id = ATA_SHT_THIS_ID, diff --git a/drivers/scsi/sata_sil24.c b/drivers/scsi/sata_sil24.c index 7222fc7ff3fc..f4742ad3c962 100644 --- a/drivers/scsi/sata_sil24.c +++ b/drivers/scsi/sata_sil24.c @@ -280,6 +280,7 @@ static struct scsi_host_template sil24_sht = { .name = DRV_NAME, .ioctl = ata_scsi_ioctl, .queuecommand = ata_scsi_queuecmd, + .eh_timed_out = ata_scsi_timed_out, .eh_strategy_handler = ata_scsi_error, .can_queue = ATA_DEF_QUEUE, .this_id = ATA_SHT_THIS_ID, diff --git a/drivers/scsi/sata_sis.c b/drivers/scsi/sata_sis.c index 2df8c5632ac3..2f1815715705 100644 --- a/drivers/scsi/sata_sis.c +++ b/drivers/scsi/sata_sis.c @@ -87,6 +87,7 @@ static struct scsi_host_template sis_sht = { .name = DRV_NAME, .ioctl = ata_scsi_ioctl, .queuecommand = ata_scsi_queuecmd, + .eh_timed_out = ata_scsi_timed_out, .eh_strategy_handler = ata_scsi_error, .can_queue = ATA_DEF_QUEUE, .this_id = ATA_SHT_THIS_ID, diff --git a/drivers/scsi/sata_svw.c b/drivers/scsi/sata_svw.c index d8472563fde8..f369c3003adf 100644 --- a/drivers/scsi/sata_svw.c +++ b/drivers/scsi/sata_svw.c @@ -288,6 +288,7 @@ static struct scsi_host_template k2_sata_sht = { .name = DRV_NAME, .ioctl = ata_scsi_ioctl, .queuecommand = ata_scsi_queuecmd, + .eh_timed_out = ata_scsi_timed_out, .eh_strategy_handler = ata_scsi_error, .can_queue = ATA_DEF_QUEUE, .this_id = ATA_SHT_THIS_ID, diff --git a/drivers/scsi/sata_sx4.c b/drivers/scsi/sata_sx4.c index 9f992fbcf2e7..3319f03b61a0 100644 --- a/drivers/scsi/sata_sx4.c +++ b/drivers/scsi/sata_sx4.c @@ -182,6 +182,7 @@ static struct scsi_host_template pdc_sata_sht = { .name = DRV_NAME, .ioctl = ata_scsi_ioctl, .queuecommand = ata_scsi_queuecmd, + .eh_timed_out = ata_scsi_timed_out, .eh_strategy_handler = ata_scsi_error, .can_queue = ATA_DEF_QUEUE, .this_id = ATA_SHT_THIS_ID, diff --git a/drivers/scsi/sata_uli.c b/drivers/scsi/sata_uli.c index 9635ca700977..c500f2490902 100644 --- a/drivers/scsi/sata_uli.c +++ b/drivers/scsi/sata_uli.c @@ -75,6 +75,7 @@ static struct scsi_host_template uli_sht = { .name = DRV_NAME, .ioctl = ata_scsi_ioctl, .queuecommand = ata_scsi_queuecmd, + .eh_timed_out = ata_scsi_timed_out, .eh_strategy_handler = ata_scsi_error, .can_queue = ATA_DEF_QUEUE, .this_id = ATA_SHT_THIS_ID, diff --git a/drivers/scsi/sata_via.c b/drivers/scsi/sata_via.c index 6d5b0a794cfd..2e20887dc88f 100644 --- a/drivers/scsi/sata_via.c +++ b/drivers/scsi/sata_via.c @@ -94,6 +94,7 @@ static struct scsi_host_template svia_sht = { .name = DRV_NAME, .ioctl = ata_scsi_ioctl, .queuecommand = ata_scsi_queuecmd, + .eh_timed_out = ata_scsi_timed_out, .eh_strategy_handler = ata_scsi_error, .can_queue = ATA_DEF_QUEUE, .this_id = ATA_SHT_THIS_ID, diff --git a/drivers/scsi/sata_vsc.c b/drivers/scsi/sata_vsc.c index 2e2c3b7acb0c..cf1f8a61bda0 100644 --- a/drivers/scsi/sata_vsc.c +++ b/drivers/scsi/sata_vsc.c @@ -223,6 +223,7 @@ static struct scsi_host_template vsc_sata_sht = { .name = DRV_NAME, .ioctl = ata_scsi_ioctl, .queuecommand = ata_scsi_queuecmd, + .eh_timed_out = ata_scsi_timed_out, .eh_strategy_handler = ata_scsi_error, .can_queue = ATA_DEF_QUEUE, .this_id = ATA_SHT_THIS_ID, -- cgit v1.2.1 From f63790201521ccadb63673ff121dac46ab300cf0 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Fri, 10 Feb 2006 15:10:48 +0900 Subject: [PATCH] libata: kill NULL qc handling from ->eng_timeout callbacks ->eng_timeout cannot be invoked with NULL qc anymore. Add an assertion in ata_scsi_error() and kill NULL qc handling from all ->eng_timeout callbacks. Signed-off-by: Tejun Heo Signed-off-by: Jeff Garzik --- drivers/scsi/ahci.c | 12 +++--------- drivers/scsi/libata-core.c | 12 +----------- drivers/scsi/libata-scsi.c | 1 + drivers/scsi/sata_mv.c | 9 ++------- drivers/scsi/sata_promise.c | 9 +-------- drivers/scsi/sata_sil24.c | 5 ----- drivers/scsi/sata_sx4.c | 9 +-------- 7 files changed, 9 insertions(+), 48 deletions(-) (limited to 'drivers/scsi') diff --git a/drivers/scsi/ahci.c b/drivers/scsi/ahci.c index c67189a4e0b1..fa01894fc41b 100644 --- a/drivers/scsi/ahci.c +++ b/drivers/scsi/ahci.c @@ -677,19 +677,13 @@ static void ahci_eng_timeout(struct ata_port *ap) spin_lock_irqsave(&host_set->lock, flags); + ahci_restart_port(ap, readl(port_mmio + PORT_IRQ_STAT)); qc = ata_qc_from_tag(ap, ap->active_tag); - if (!qc) { - printk(KERN_ERR "ata%u: BUG: timeout without command\n", - ap->id); - } else { - ahci_restart_port(ap, readl(port_mmio + PORT_IRQ_STAT)); - qc->err_mask |= AC_ERR_TIMEOUT; - } + qc->err_mask |= AC_ERR_TIMEOUT; spin_unlock_irqrestore(&host_set->lock, flags); - if (qc) - ata_eh_qc_complete(qc); + ata_eh_qc_complete(qc); } static inline int ahci_host_intr(struct ata_port *ap, struct ata_queued_cmd *qc) diff --git a/drivers/scsi/libata-core.c b/drivers/scsi/libata-core.c index d53e0bce2bec..b938c7a37664 100644 --- a/drivers/scsi/libata-core.c +++ b/drivers/scsi/libata-core.c @@ -3524,20 +3524,10 @@ static void ata_qc_timeout(struct ata_queued_cmd *qc) void ata_eng_timeout(struct ata_port *ap) { - struct ata_queued_cmd *qc; - DPRINTK("ENTER\n"); - qc = ata_qc_from_tag(ap, ap->active_tag); - if (qc) - ata_qc_timeout(qc); - else { - printk(KERN_ERR "ata%u: BUG: timeout without command\n", - ap->id); - goto out; - } + ata_qc_timeout(ata_qc_from_tag(ap, ap->active_tag)); -out: DPRINTK("EXIT\n"); } diff --git a/drivers/scsi/libata-scsi.c b/drivers/scsi/libata-scsi.c index d67cc2fb5694..9d67c6768335 100644 --- a/drivers/scsi/libata-scsi.c +++ b/drivers/scsi/libata-scsi.c @@ -782,6 +782,7 @@ int ata_scsi_error(struct Scsi_Host *host) spin_lock_irqsave(&ap->host_set->lock, flags); assert(!(ap->flags & ATA_FLAG_IN_EH)); ap->flags |= ATA_FLAG_IN_EH; + assert(ata_qc_from_tag(ap, ap->active_tag) != NULL); spin_unlock_irqrestore(&ap->host_set->lock, flags); ap->ops->eng_timeout(ap); diff --git a/drivers/scsi/sata_mv.c b/drivers/scsi/sata_mv.c index 1db05f23f12f..6c80527ddd21 100644 --- a/drivers/scsi/sata_mv.c +++ b/drivers/scsi/sata_mv.c @@ -2027,13 +2027,8 @@ static void mv_eng_timeout(struct ata_port *ap) mv_err_intr(ap); mv_stop_and_reset(ap); - if (!qc) { - printk(KERN_ERR "ata%u: BUG: timeout without command\n", - ap->id); - } else { - qc->err_mask |= AC_ERR_TIMEOUT; - ata_eh_qc_complete(qc); - } + qc->err_mask |= AC_ERR_TIMEOUT; + ata_eh_qc_complete(qc); } /** diff --git a/drivers/scsi/sata_promise.c b/drivers/scsi/sata_promise.c index 5d4ed54d9452..c9dfd9370919 100644 --- a/drivers/scsi/sata_promise.c +++ b/drivers/scsi/sata_promise.c @@ -432,11 +432,6 @@ static void pdc_eng_timeout(struct ata_port *ap) spin_lock_irqsave(&host_set->lock, flags); qc = ata_qc_from_tag(ap, ap->active_tag); - if (!qc) { - printk(KERN_ERR "ata%u: BUG: timeout without command\n", - ap->id); - goto out; - } switch (qc->tf.protocol) { case ATA_PROT_DMA: @@ -456,10 +451,8 @@ static void pdc_eng_timeout(struct ata_port *ap) break; } -out: spin_unlock_irqrestore(&host_set->lock, flags); - if (qc) - ata_eh_qc_complete(qc); + ata_eh_qc_complete(qc); DPRINTK("EXIT\n"); } diff --git a/drivers/scsi/sata_sil24.c b/drivers/scsi/sata_sil24.c index f4742ad3c962..962396b36f61 100644 --- a/drivers/scsi/sata_sil24.c +++ b/drivers/scsi/sata_sil24.c @@ -639,11 +639,6 @@ static void sil24_eng_timeout(struct ata_port *ap) struct ata_queued_cmd *qc; qc = ata_qc_from_tag(ap, ap->active_tag); - if (!qc) { - printk(KERN_ERR "ata%u: BUG: timeout without command\n", - ap->id); - return; - } printk(KERN_ERR "ata%u: command timeout\n", ap->id); qc->err_mask |= AC_ERR_TIMEOUT; diff --git a/drivers/scsi/sata_sx4.c b/drivers/scsi/sata_sx4.c index 3319f03b61a0..212cff4fe5f5 100644 --- a/drivers/scsi/sata_sx4.c +++ b/drivers/scsi/sata_sx4.c @@ -867,11 +867,6 @@ static void pdc_eng_timeout(struct ata_port *ap) spin_lock_irqsave(&host_set->lock, flags); qc = ata_qc_from_tag(ap, ap->active_tag); - if (!qc) { - printk(KERN_ERR "ata%u: BUG: timeout without command\n", - ap->id); - goto out; - } switch (qc->tf.protocol) { case ATA_PROT_DMA: @@ -890,10 +885,8 @@ static void pdc_eng_timeout(struct ata_port *ap) break; } -out: spin_unlock_irqrestore(&host_set->lock, flags); - if (qc) - ata_eh_qc_complete(qc); + ata_eh_qc_complete(qc); DPRINTK("EXIT\n"); } -- cgit v1.2.1 From cc9278ed5e992122a654a3f762561ee5e013810f Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Fri, 10 Feb 2006 17:25:47 +0900 Subject: [PATCH] ahci: separate out ahci_fill_cmd_slot() Separate out ahci_fill_cmd_slot() from ahci_qc_prep(). ahci_fill_cmd_slot() can later be used to issue non-standard commands. (e.g. softreset) Signed-off-by: Tejun Heo Signed-off-by: Jeff Garzik --- drivers/scsi/ahci.c | 44 +++++++++++++++++++++++--------------------- 1 file changed, 23 insertions(+), 21 deletions(-) (limited to 'drivers/scsi') diff --git a/drivers/scsi/ahci.c b/drivers/scsi/ahci.c index fa01894fc41b..98ce6bb62ff8 100644 --- a/drivers/scsi/ahci.c +++ b/drivers/scsi/ahci.c @@ -507,6 +507,15 @@ static unsigned int ahci_dev_classify(struct ata_port *ap) return ata_dev_classify(&tf); } +static void ahci_fill_cmd_slot(struct ata_port *ap, u32 opts) +{ + struct ahci_port_priv *pp = ap->private_data; + pp->cmd_slot[0].opts = cpu_to_le32(opts); + pp->cmd_slot[0].status = 0; + pp->cmd_slot[0].tbl_addr = cpu_to_le32(pp->cmd_tbl_dma & 0xffffffff); + pp->cmd_slot[0].tbl_addr_hi = cpu_to_le32((pp->cmd_tbl_dma >> 16) >> 16); +} + static void ahci_phy_reset(struct ata_port *ap) { void __iomem *port_mmio = (void __iomem *) ap->ioaddr.cmd_addr; @@ -585,42 +594,35 @@ static void ahci_qc_prep(struct ata_queued_cmd *qc) { struct ata_port *ap = qc->ap; struct ahci_port_priv *pp = ap->private_data; + int is_atapi = is_atapi_taskfile(&qc->tf); u32 opts; const u32 cmd_fis_len = 5; /* five dwords */ unsigned int n_elem; - /* - * Fill in command slot information (currently only one slot, - * slot 0, is currently since we don't do queueing) - */ - - opts = cmd_fis_len; - if (qc->tf.flags & ATA_TFLAG_WRITE) - opts |= AHCI_CMD_WRITE; - if (is_atapi_taskfile(&qc->tf)) - opts |= AHCI_CMD_ATAPI; - - pp->cmd_slot[0].opts = cpu_to_le32(opts); - pp->cmd_slot[0].status = 0; - pp->cmd_slot[0].tbl_addr = cpu_to_le32(pp->cmd_tbl_dma & 0xffffffff); - pp->cmd_slot[0].tbl_addr_hi = cpu_to_le32((pp->cmd_tbl_dma >> 16) >> 16); - /* * Fill in command table information. First, the header, * a SATA Register - Host to Device command FIS. */ ata_tf_to_fis(&qc->tf, pp->cmd_tbl, 0); - if (opts & AHCI_CMD_ATAPI) { + if (is_atapi) { memset(pp->cmd_tbl + AHCI_CMD_TBL_CDB, 0, 32); memcpy(pp->cmd_tbl + AHCI_CMD_TBL_CDB, qc->cdb, ap->cdb_len); } - if (!(qc->flags & ATA_QCFLAG_DMAMAP)) - return; + n_elem = 0; + if (qc->flags & ATA_QCFLAG_DMAMAP) + n_elem = ahci_fill_sg(qc); - n_elem = ahci_fill_sg(qc); + /* + * Fill in command slot information. + */ + opts = cmd_fis_len | n_elem << 16; + if (qc->tf.flags & ATA_TFLAG_WRITE) + opts |= AHCI_CMD_WRITE; + if (is_atapi) + opts |= AHCI_CMD_ATAPI; - pp->cmd_slot[0].opts |= cpu_to_le32(n_elem << 16); + ahci_fill_cmd_slot(ap, opts); } static void ahci_restart_port(struct ata_port *ap, u32 irq_stat) -- cgit v1.2.1 From 3a39746a5290445ea4238f21ac260e42106c1454 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Fri, 10 Feb 2006 23:58:48 +0900 Subject: [PATCH] libata: make new reset act identical to ->phy_reset register-wise This patch makes std component operations act identical to ->phy_reset register-wise except for SError clearing on sata_std_hardreset. Note that if a driver only implements/uses hardreset, it should not use ata_std_probeinit() to avoid extra sata_phy_resume() and ata_busy_sleep() compared to ->phy_reset. Signed-off-by: Tejun Heo Signed-off-by: Jeff Garzik --- drivers/scsi/libata-core.c | 51 ++++++++++++++++++++++++++++++---------------- 1 file changed, 34 insertions(+), 17 deletions(-) (limited to 'drivers/scsi') diff --git a/drivers/scsi/libata-core.c b/drivers/scsi/libata-core.c index b938c7a37664..8424bd9ee26d 100644 --- a/drivers/scsi/libata-core.c +++ b/drivers/scsi/libata-core.c @@ -1924,11 +1924,20 @@ static int sata_phy_resume(struct ata_port *ap) * * @ap is about to be probed. Initialize it. This function is * to be used as standard callback for ata_drive_probe_reset(). + * + * NOTE!!! Do not use this function as probeinit if a low level + * driver implements only hardreset. Just pass NULL as probeinit + * in that case. Using this function is probably okay but doing + * so makes reset sequence different from the original + * ->phy_reset implementation and Jeff nervous. :-P */ extern void ata_std_probeinit(struct ata_port *ap) { - if (ap->flags & ATA_FLAG_SATA && ap->ops->scr_read) + if (ap->flags & ATA_FLAG_SATA && ap->ops->scr_read) { sata_phy_resume(ap); + if (sata_dev_present(ap)) + ata_busy_sleep(ap, ATA_TMOUT_BOOT_QUICK, ATA_TMOUT_BOOT); + } } /** @@ -1954,20 +1963,17 @@ int ata_std_softreset(struct ata_port *ap, int verbose, unsigned int *classes) DPRINTK("ENTER\n"); + if (ap->ops->scr_read && !sata_dev_present(ap)) { + classes[0] = ATA_DEV_NONE; + goto out; + } + /* determine if device 0/1 are present */ if (ata_devchk(ap, 0)) devmask |= (1 << 0); if (slave_possible && ata_devchk(ap, 1)) devmask |= (1 << 1); - /* devchk reports device presence without actual device on - * most SATA controllers. Check SStatus and turn devmask off - * if link is offline. Note that we should continue resetting - * even when it seems like there's no device. - */ - if (ap->ops->scr_read && !sata_dev_present(ap)) - devmask = 0; - /* select device 0 again */ ap->ops->dev_select(ap, 0); @@ -1989,6 +1995,7 @@ int ata_std_softreset(struct ata_port *ap, int verbose, unsigned int *classes) if (slave_possible && err != 0x81) classes[1] = ata_dev_try_classify(ap, 1, &err); + out: DPRINTK("EXIT, classes[0]=%u [1]=%u\n", classes[0], classes[1]); return 0; } @@ -2047,6 +2054,8 @@ int sata_std_hardreset(struct ata_port *ap, int verbose, unsigned int *class) return -EIO; } + ap->ops->dev_select(ap, 0); /* probably unnecessary */ + *class = ata_dev_try_classify(ap, 0, NULL); DPRINTK("EXIT, class=%u\n", *class); @@ -2081,11 +2090,9 @@ void ata_std_postreset(struct ata_port *ap, unsigned int *classes) if (ap->cbl == ATA_CBL_SATA) sata_print_link_status(ap); - /* bail out if no device is present */ - if (classes[0] == ATA_DEV_NONE && classes[1] == ATA_DEV_NONE) { - DPRINTK("EXIT, no device\n"); - return; - } + /* re-enable interrupts */ + if (ap->ioaddr.ctl_addr) /* FIXME: hack. create a hook instead */ + ata_irq_on(ap); /* is double-select really necessary? */ if (classes[0] != ATA_DEV_NONE) @@ -2093,9 +2100,19 @@ void ata_std_postreset(struct ata_port *ap, unsigned int *classes) if (classes[1] != ATA_DEV_NONE) ap->ops->dev_select(ap, 0); - /* re-enable interrupts & set up device control */ - if (ap->ioaddr.ctl_addr) /* FIXME: hack. create a hook instead */ - ata_irq_on(ap); + /* bail out if no device is present */ + if (classes[0] == ATA_DEV_NONE && classes[1] == ATA_DEV_NONE) { + DPRINTK("EXIT, no device\n"); + return; + } + + /* set up device control */ + if (ap->ioaddr.ctl_addr) { + if (ap->flags & ATA_FLAG_MMIO) + writeb(ap->ctl, (void __iomem *) ap->ioaddr.ctl_addr); + else + outb(ap->ctl, ap->ioaddr.ctl_addr); + } DPRINTK("EXIT\n"); } -- cgit v1.2.1 From ac7c6d596e2177857ffc35b8d453ee313a874d8d Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Fri, 10 Feb 2006 23:58:48 +0900 Subject: [PATCH] libata: kill SError clearing in sata_std_hardreset(). Don't clear SError in sata_std_hardreset(). This makes hardreset act identically to ->phy_reset register-wise. Signed-off-by: Tejun Heo Signed-off-by: Jeff Garzik --- drivers/scsi/libata-core.c | 6 ------ 1 file changed, 6 deletions(-) (limited to 'drivers/scsi') diff --git a/drivers/scsi/libata-core.c b/drivers/scsi/libata-core.c index 8424bd9ee26d..38e72c1dd689 100644 --- a/drivers/scsi/libata-core.c +++ b/drivers/scsi/libata-core.c @@ -2018,8 +2018,6 @@ int ata_std_softreset(struct ata_port *ap, int verbose, unsigned int *classes) */ int sata_std_hardreset(struct ata_port *ap, int verbose, unsigned int *class) { - u32 serror; - DPRINTK("ENTER\n"); /* Issue phy wake/reset */ @@ -2034,10 +2032,6 @@ int sata_std_hardreset(struct ata_port *ap, int verbose, unsigned int *class) /* Bring phy back */ sata_phy_resume(ap); - /* Clear SError */ - serror = scr_read(ap, SCR_ERROR); - scr_write(ap, SCR_ERROR, serror); - /* TODO: phy layer with polling, timeouts, etc. */ if (!sata_dev_present(ap)) { *class = ATA_DEV_NONE; -- cgit v1.2.1 From 531db7aa0db09f188b71108c35f334af35968291 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Fri, 10 Feb 2006 23:58:48 +0900 Subject: [PATCH] sata_sil: convert to new reset mechanism Convert sata_sil to use new reset mechanism. sata_sil is fairly generic and can directly use std routine. Signed-off-by: Tejun Heo Signed-off-by: Jeff Garzik --- drivers/scsi/sata_sil.c | 9 ++++----- 1 file changed, 4 insertions(+), 5 deletions(-) (limited to 'drivers/scsi') diff --git a/drivers/scsi/sata_sil.c b/drivers/scsi/sata_sil.c index f40f25edbb11..bd2887741d78 100644 --- a/drivers/scsi/sata_sil.c +++ b/drivers/scsi/sata_sil.c @@ -158,7 +158,7 @@ static const struct ata_port_operations sil_ops = { .check_status = ata_check_status, .exec_command = ata_exec_command, .dev_select = ata_std_dev_select, - .phy_reset = sata_phy_reset, + .probe_reset = ata_std_probe_reset, .post_set_mode = sil_post_set_mode, .bmdma_setup = ata_bmdma_setup, .bmdma_start = ata_bmdma_start, @@ -181,7 +181,7 @@ static const struct ata_port_info sil_port_info[] = { { .sht = &sil_sht, .host_flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY | - ATA_FLAG_SRST | ATA_FLAG_MMIO, + ATA_FLAG_MMIO, .pio_mask = 0x1f, /* pio0-4 */ .mwdma_mask = 0x07, /* mwdma0-2 */ .udma_mask = 0x3f, /* udma0-5 */ @@ -190,8 +190,7 @@ static const struct ata_port_info sil_port_info[] = { { .sht = &sil_sht, .host_flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY | - ATA_FLAG_SRST | ATA_FLAG_MMIO | - SIL_FLAG_MOD15WRITE, + ATA_FLAG_MMIO | SIL_FLAG_MOD15WRITE, .pio_mask = 0x1f, /* pio0-4 */ .mwdma_mask = 0x07, /* mwdma0-2 */ .udma_mask = 0x3f, /* udma0-5 */ @@ -200,7 +199,7 @@ static const struct ata_port_info sil_port_info[] = { { .sht = &sil_sht, .host_flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY | - ATA_FLAG_SRST | ATA_FLAG_MMIO, + ATA_FLAG_MMIO, .pio_mask = 0x1f, /* pio0-4 */ .mwdma_mask = 0x07, /* mwdma0-2 */ .udma_mask = 0x3f, /* udma0-5 */ -- cgit v1.2.1 From 07b734702a96efbc260bf50c2ce57e34167f431b Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Fri, 10 Feb 2006 23:58:48 +0900 Subject: [PATCH] sata_sil24: convert to new reset mechanism Convert sata_sil24 ->phy_reset to new reset mechanism. Signed-off-by: Tejun Heo Signed-off-by: Jeff Garzik --- drivers/scsi/sata_sil24.c | 56 +++++++++++++++++++++++------------------------ 1 file changed, 28 insertions(+), 28 deletions(-) (limited to 'drivers/scsi') diff --git a/drivers/scsi/sata_sil24.c b/drivers/scsi/sata_sil24.c index 962396b36f61..ccac05a5eb6d 100644 --- a/drivers/scsi/sata_sil24.c +++ b/drivers/scsi/sata_sil24.c @@ -249,7 +249,7 @@ static u8 sil24_check_status(struct ata_port *ap); static u32 sil24_scr_read(struct ata_port *ap, unsigned sc_reg); static void sil24_scr_write(struct ata_port *ap, unsigned sc_reg, u32 val); static void sil24_tf_read(struct ata_port *ap, struct ata_taskfile *tf); -static void sil24_phy_reset(struct ata_port *ap); +static int sil24_probe_reset(struct ata_port *ap, unsigned int *classes); static void sil24_qc_prep(struct ata_queued_cmd *qc); static unsigned int sil24_qc_issue(struct ata_queued_cmd *qc); static void sil24_irq_clear(struct ata_port *ap); @@ -306,7 +306,7 @@ static const struct ata_port_operations sil24_ops = { .tf_read = sil24_tf_read, - .phy_reset = sil24_phy_reset, + .probe_reset = sil24_probe_reset, .qc_prep = sil24_qc_prep, .qc_issue = sil24_qc_issue, @@ -336,8 +336,8 @@ static struct ata_port_info sil24_port_info[] = { { .sht = &sil24_sht, .host_flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY | - ATA_FLAG_SRST | ATA_FLAG_MMIO | - ATA_FLAG_PIO_DMA | SIL24_NPORTS2FLAG(4), + ATA_FLAG_MMIO | ATA_FLAG_PIO_DMA | + SIL24_NPORTS2FLAG(4), .pio_mask = 0x1f, /* pio0-4 */ .mwdma_mask = 0x07, /* mwdma0-2 */ .udma_mask = 0x3f, /* udma0-5 */ @@ -347,8 +347,8 @@ static struct ata_port_info sil24_port_info[] = { { .sht = &sil24_sht, .host_flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY | - ATA_FLAG_SRST | ATA_FLAG_MMIO | - ATA_FLAG_PIO_DMA | SIL24_NPORTS2FLAG(2), + ATA_FLAG_MMIO | ATA_FLAG_PIO_DMA | + SIL24_NPORTS2FLAG(2), .pio_mask = 0x1f, /* pio0-4 */ .mwdma_mask = 0x07, /* mwdma0-2 */ .udma_mask = 0x3f, /* udma0-5 */ @@ -358,8 +358,8 @@ static struct ata_port_info sil24_port_info[] = { { .sht = &sil24_sht, .host_flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY | - ATA_FLAG_SRST | ATA_FLAG_MMIO | - ATA_FLAG_PIO_DMA | SIL24_NPORTS2FLAG(1), + ATA_FLAG_MMIO | ATA_FLAG_PIO_DMA | + SIL24_NPORTS2FLAG(1), .pio_mask = 0x1f, /* pio0-4 */ .mwdma_mask = 0x07, /* mwdma0-2 */ .udma_mask = 0x3f, /* udma0-5 */ @@ -428,7 +428,8 @@ static void sil24_tf_read(struct ata_port *ap, struct ata_taskfile *tf) *tf = pp->tf; } -static int sil24_issue_SRST(struct ata_port *ap) +static int sil24_softreset(struct ata_port *ap, int verbose, + unsigned int *class) { void __iomem *port = (void __iomem *)ap->ioaddr.cmd_addr; struct sil24_port_priv *pp = ap->private_data; @@ -437,6 +438,8 @@ static int sil24_issue_SRST(struct ata_port *ap) u32 irq_enable, irq_stat; int cnt; + DPRINTK("ENTER\n"); + /* temporarily turn off IRQs during SRST */ irq_enable = readl(port + PORT_IRQ_ENABLE_SET); writel(irq_enable, port + PORT_IRQ_ENABLE_CLR); @@ -466,30 +469,27 @@ static int sil24_issue_SRST(struct ata_port *ap) /* restore IRQs */ writel(irq_enable, port + PORT_IRQ_ENABLE_SET); - if (!(irq_stat & PORT_IRQ_COMPLETE)) - return -1; + if (sata_dev_present(ap)) { + if (!(irq_stat & PORT_IRQ_COMPLETE)) { + DPRINTK("EXIT, srst failed\n"); + return -EIO; + } - /* update TF */ - sil24_update_tf(ap); + sil24_update_tf(ap); + *class = ata_dev_classify(&pp->tf); + } + if (*class == ATA_DEV_UNKNOWN) + *class = ATA_DEV_NONE; + + DPRINTK("EXIT, class=%u\n", *class); return 0; } -static void sil24_phy_reset(struct ata_port *ap) +static int sil24_probe_reset(struct ata_port *ap, unsigned int *classes) { - struct sil24_port_priv *pp = ap->private_data; - - __sata_phy_reset(ap); - if (ap->flags & ATA_FLAG_PORT_DISABLED) - return; - - if (sil24_issue_SRST(ap) < 0) { - printk(KERN_ERR DRV_NAME - " ata%u: SRST failed, disabling port\n", ap->id); - ap->ops->port_disable(ap); - return; - } - - ap->device->class = ata_dev_classify(&pp->tf); + return ata_drive_probe_reset(ap, ata_std_probeinit, + sil24_softreset, NULL, + ata_std_postreset, classes); } static inline void sil24_fill_sg(struct ata_queued_cmd *qc, -- cgit v1.2.1 From 489ff4c7d167be954f715128790bd80d3c888322 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Fri, 10 Feb 2006 23:58:48 +0900 Subject: [PATCH] sata_sil24: add hardreset Now that libata is smart enough to handle both soft and hard resets, add hardreset method. Note that sil24 hardreset doesn't supply signature; still, the new reset mechanism can make good use of it. Signed-off-by: Tejun Heo Signed-off-by: Jeff Garzik --- drivers/scsi/sata_sil24.c | 11 ++++++++++- 1 file changed, 10 insertions(+), 1 deletion(-) (limited to 'drivers/scsi') diff --git a/drivers/scsi/sata_sil24.c b/drivers/scsi/sata_sil24.c index ccac05a5eb6d..228a7fabffff 100644 --- a/drivers/scsi/sata_sil24.c +++ b/drivers/scsi/sata_sil24.c @@ -485,10 +485,19 @@ static int sil24_softreset(struct ata_port *ap, int verbose, return 0; } +static int sil24_hardreset(struct ata_port *ap, int verbose, + unsigned int *class) +{ + unsigned int dummy_class; + + /* sil24 doesn't report device signature after hard reset */ + return sata_std_hardreset(ap, verbose, &dummy_class); +} + static int sil24_probe_reset(struct ata_port *ap, unsigned int *classes) { return ata_drive_probe_reset(ap, ata_std_probeinit, - sil24_softreset, NULL, + sil24_softreset, sil24_hardreset, ata_std_postreset, classes); } -- cgit v1.2.1 From 76014427e60f7ecfdc689dfbcb48e9760e1da4fb Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Sat, 11 Feb 2006 15:13:49 +0900 Subject: [PATCH] libata: inline ata_qc_complete() This patch inlines ata_qc_complete() and uninlines __ata_qc_complete() as suggested by Jeff Garzik. Signed-off-by: Tejun Heo Signed-off-by: Jeff Garzik --- drivers/scsi/libata-core.c | 23 ++--------------------- drivers/scsi/libata.h | 1 - 2 files changed, 2 insertions(+), 22 deletions(-) (limited to 'drivers/scsi') diff --git a/drivers/scsi/libata-core.c b/drivers/scsi/libata-core.c index 38e72c1dd689..fffbaa9dae76 100644 --- a/drivers/scsi/libata-core.c +++ b/drivers/scsi/libata-core.c @@ -3621,7 +3621,7 @@ void ata_qc_free(struct ata_queued_cmd *qc) } } -inline void __ata_qc_complete(struct ata_queued_cmd *qc) +void __ata_qc_complete(struct ata_queued_cmd *qc) { assert(qc != NULL); /* ata_qc_from_tag _might_ return NULL */ assert(qc->flags & ATA_QCFLAG_ACTIVE); @@ -3639,25 +3639,6 @@ inline void __ata_qc_complete(struct ata_queued_cmd *qc) qc->complete_fn(qc); } -/** - * ata_qc_complete - Complete an active ATA command - * @qc: Command to complete - * @err_mask: ATA Status register contents - * - * Indicate to the mid and upper layers that an ATA - * command has completed, with either an ok or not-ok status. - * - * LOCKING: - * spin_lock_irqsave(host_set lock) - */ -void ata_qc_complete(struct ata_queued_cmd *qc) -{ - if (unlikely(qc->flags & ATA_QCFLAG_EH_SCHEDULED)) - return; - - __ata_qc_complete(qc); -} - static inline int ata_should_dma_map(struct ata_queued_cmd *qc) { struct ata_port *ap = qc->ap; @@ -4877,7 +4858,7 @@ EXPORT_SYMBOL_GPL(ata_device_add); EXPORT_SYMBOL_GPL(ata_host_set_remove); EXPORT_SYMBOL_GPL(ata_sg_init); EXPORT_SYMBOL_GPL(ata_sg_init_one); -EXPORT_SYMBOL_GPL(ata_qc_complete); +EXPORT_SYMBOL_GPL(__ata_qc_complete); EXPORT_SYMBOL_GPL(ata_qc_issue_prot); EXPORT_SYMBOL_GPL(ata_eng_timeout); EXPORT_SYMBOL_GPL(ata_tf_load); diff --git a/drivers/scsi/libata.h b/drivers/scsi/libata.h index 1cd071a32e93..9d76923a2253 100644 --- a/drivers/scsi/libata.h +++ b/drivers/scsi/libata.h @@ -46,7 +46,6 @@ extern struct ata_queued_cmd *ata_qc_new_init(struct ata_port *ap, extern int ata_rwcmd_protocol(struct ata_queued_cmd *qc); extern void ata_qc_free(struct ata_queued_cmd *qc); extern unsigned int ata_qc_issue(struct ata_queued_cmd *qc); -extern void __ata_qc_complete(struct ata_queued_cmd *qc); extern int ata_check_atapi_dma(struct ata_queued_cmd *qc); extern void ata_dev_select(struct ata_port *ap, unsigned int device, unsigned int wait, unsigned int can_sleep); -- cgit v1.2.1 From a42fc659ba4e4026b2397344180458bebb79e1d2 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Sat, 11 Feb 2006 16:26:02 +0900 Subject: [PATCH] ahci: make ahci_fill_cmd_slot() take *pp instead of *ap Make ahci_fill_cmd_slot() take struct ahci_port_priv *pp instead of struct ata_port *ap as suggested by Jeff Garzik. Signed-off-by: Tejun Heo Signed-off-by: Jeff Garzik --- drivers/scsi/ahci.c | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) (limited to 'drivers/scsi') diff --git a/drivers/scsi/ahci.c b/drivers/scsi/ahci.c index 98ce6bb62ff8..72bdd434159e 100644 --- a/drivers/scsi/ahci.c +++ b/drivers/scsi/ahci.c @@ -507,9 +507,8 @@ static unsigned int ahci_dev_classify(struct ata_port *ap) return ata_dev_classify(&tf); } -static void ahci_fill_cmd_slot(struct ata_port *ap, u32 opts) +static void ahci_fill_cmd_slot(struct ahci_port_priv *pp, u32 opts) { - struct ahci_port_priv *pp = ap->private_data; pp->cmd_slot[0].opts = cpu_to_le32(opts); pp->cmd_slot[0].status = 0; pp->cmd_slot[0].tbl_addr = cpu_to_le32(pp->cmd_tbl_dma & 0xffffffff); @@ -622,7 +621,7 @@ static void ahci_qc_prep(struct ata_queued_cmd *qc) if (is_atapi) opts |= AHCI_CMD_ATAPI; - ahci_fill_cmd_slot(ap, opts); + ahci_fill_cmd_slot(pp, opts); } static void ahci_restart_port(struct ata_port *ap, u32 irq_stat) -- cgit v1.2.1 From 4bd00f6a201897af4cd50250a761e6bc4b2221ec Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Sat, 11 Feb 2006 16:26:02 +0900 Subject: [PATCH] ahci: convert to new reset mechanism Convert ahci ->phy_reset to new reset mechanism. Signed-off-by: Tejun Heo Signed-off-by: Jeff Garzik --- drivers/scsi/ahci.c | 46 +++++++++++++++++++++++++++++----------------- 1 file changed, 29 insertions(+), 17 deletions(-) (limited to 'drivers/scsi') diff --git a/drivers/scsi/ahci.c b/drivers/scsi/ahci.c index 72bdd434159e..86bccb7128f9 100644 --- a/drivers/scsi/ahci.c +++ b/drivers/scsi/ahci.c @@ -190,7 +190,7 @@ static void ahci_scr_write (struct ata_port *ap, unsigned int sc_reg, u32 val); static int ahci_init_one (struct pci_dev *pdev, const struct pci_device_id *ent); static unsigned int ahci_qc_issue(struct ata_queued_cmd *qc); static irqreturn_t ahci_interrupt (int irq, void *dev_instance, struct pt_regs *regs); -static void ahci_phy_reset(struct ata_port *ap); +static int ahci_probe_reset(struct ata_port *ap, unsigned int *classes); static void ahci_irq_clear(struct ata_port *ap); static void ahci_eng_timeout(struct ata_port *ap); static int ahci_port_start(struct ata_port *ap); @@ -230,7 +230,7 @@ static const struct ata_port_operations ahci_ops = { .tf_read = ahci_tf_read, - .phy_reset = ahci_phy_reset, + .probe_reset = ahci_probe_reset, .qc_prep = ahci_qc_prep, .qc_issue = ahci_qc_issue, @@ -252,8 +252,7 @@ static const struct ata_port_info ahci_port_info[] = { { .sht = &ahci_sht, .host_flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY | - ATA_FLAG_SATA_RESET | ATA_FLAG_MMIO | - ATA_FLAG_PIO_DMA, + ATA_FLAG_MMIO | ATA_FLAG_PIO_DMA, .pio_mask = 0x1f, /* pio0-4 */ .udma_mask = 0x7f, /* udma0-6 ; FIXME */ .port_ops = &ahci_ops, @@ -515,28 +514,35 @@ static void ahci_fill_cmd_slot(struct ahci_port_priv *pp, u32 opts) pp->cmd_slot[0].tbl_addr_hi = cpu_to_le32((pp->cmd_tbl_dma >> 16) >> 16); } -static void ahci_phy_reset(struct ata_port *ap) +static int ahci_hardreset(struct ata_port *ap, int verbose, unsigned int *class) { - void __iomem *port_mmio = (void __iomem *) ap->ioaddr.cmd_addr; - struct ata_device *dev = &ap->device[0]; - u32 new_tmp, tmp; + int rc; + + DPRINTK("ENTER\n"); ahci_stop_engine(ap); - __sata_phy_reset(ap); + rc = sata_std_hardreset(ap, verbose, class); ahci_start_engine(ap); - if (ap->flags & ATA_FLAG_PORT_DISABLED) - return; + if (rc == 0) + *class = ahci_dev_classify(ap); + if (*class == ATA_DEV_UNKNOWN) + *class = ATA_DEV_NONE; - dev->class = ahci_dev_classify(ap); - if (!ata_dev_present(dev)) { - ata_port_disable(ap); - return; - } + DPRINTK("EXIT, rc=%d, class=%u\n", rc, *class); + return rc; +} + +static void ahci_postreset(struct ata_port *ap, unsigned int *class) +{ + void __iomem *port_mmio = (void __iomem *) ap->ioaddr.cmd_addr; + u32 new_tmp, tmp; + + ata_std_postreset(ap, class); /* Make sure port's ATAPI bit is set appropriately */ new_tmp = tmp = readl(port_mmio + PORT_CMD); - if (dev->class == ATA_DEV_ATAPI) + if (*class == ATA_DEV_ATAPI) new_tmp |= PORT_CMD_ATAPI; else new_tmp &= ~PORT_CMD_ATAPI; @@ -546,6 +552,12 @@ static void ahci_phy_reset(struct ata_port *ap) } } +static int ahci_probe_reset(struct ata_port *ap, unsigned int *classes) +{ + return ata_drive_probe_reset(ap, NULL, NULL, ahci_hardreset, + ahci_postreset, classes); +} + static u8 ahci_check_status(struct ata_port *ap) { void __iomem *mmio = (void __iomem *) ap->ioaddr.cmd_addr; -- cgit v1.2.1 From a46314744d8fadb91451bf2e5d2fd949c4a752d8 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Sat, 11 Feb 2006 19:11:13 +0900 Subject: [PATCH] libata: convert assert(X)'s in libata core layer to WARN_ON(!X)'s In an effort to kill libata-specific assert() and use generic WARN_ON(), this patch converts all assert(X)'s in libata core layer to WARN_ON(!X)'s. Most conversions are straight-forward logical negation exception for the followings. * In libata-core.c:ata_fill_sg(), assert(qc->n_elem > 0) is converted to WARN_ON(qc->n_elem == 0) because qc->n_elem is unsigned and unsigned <= 0 is weird. * In libata-scsi.c:ata_gen_ata_desc/fixed_sense(), assert(NULL != qc->ap->ops->tf_read) is converted to WARN_ON(qc->ap->ops->tf_read == NULL), as there are no other users of 'constant cond var' style in libata. Signed-off-by: Tejun Heo Signed-off-by: Jeff Garzik --- drivers/scsi/libata-core.c | 46 +++++++++++++++++++++++----------------------- drivers/scsi/libata-scsi.c | 14 +++++++------- 2 files changed, 30 insertions(+), 30 deletions(-) (limited to 'drivers/scsi') diff --git a/drivers/scsi/libata-core.c b/drivers/scsi/libata-core.c index fffbaa9dae76..cef85e515c4c 100644 --- a/drivers/scsi/libata-core.c +++ b/drivers/scsi/libata-core.c @@ -904,8 +904,8 @@ static void ata_dev_identify(struct ata_port *ap, unsigned int device) DPRINTK("ENTER, host %u, dev %u\n", ap->id, device); - assert (dev->class == ATA_DEV_ATA || dev->class == ATA_DEV_ATAPI || - dev->class == ATA_DEV_NONE); + WARN_ON(dev->class != ATA_DEV_ATA && dev->class != ATA_DEV_ATAPI && + dev->class != ATA_DEV_NONE); ata_dev_select(ap, device, 1, 1); /* select device 0/1 */ @@ -2301,7 +2301,7 @@ static unsigned int ata_get_mode_mask(const struct ata_port *ap, int shift) master = &ap->device[0]; slave = &ap->device[1]; - assert (ata_dev_present(master) || ata_dev_present(slave)); + WARN_ON(!ata_dev_present(master) && !ata_dev_present(slave)); if (shift == ATA_SHIFT_UDMA) { mask = ap->udma_mask; @@ -2547,11 +2547,11 @@ static void ata_sg_clean(struct ata_queued_cmd *qc) int dir = qc->dma_dir; void *pad_buf = NULL; - assert(qc->flags & ATA_QCFLAG_DMAMAP); - assert(sg != NULL); + WARN_ON(!(qc->flags & ATA_QCFLAG_DMAMAP)); + WARN_ON(sg == NULL); if (qc->flags & ATA_QCFLAG_SINGLE) - assert(qc->n_elem == 1); + WARN_ON(qc->n_elem != 1); VPRINTK("unmapping %u sg elements\n", qc->n_elem); @@ -2606,8 +2606,8 @@ static void ata_fill_sg(struct ata_queued_cmd *qc) struct scatterlist *sg; unsigned int idx; - assert(qc->__sg != NULL); - assert(qc->n_elem > 0); + WARN_ON(qc->__sg == NULL); + WARN_ON(qc->n_elem == 0); idx = 0; ata_for_each_sg(sg, qc) { @@ -2759,7 +2759,7 @@ static int ata_sg_setup_one(struct ata_queued_cmd *qc) void *pad_buf = ap->pad + (qc->tag * ATA_DMA_PAD_SZ); struct scatterlist *psg = &qc->pad_sgent; - assert(qc->dev->class == ATA_DEV_ATAPI); + WARN_ON(qc->dev->class != ATA_DEV_ATAPI); memset(pad_buf, 0, ATA_DMA_PAD_SZ); @@ -2821,7 +2821,7 @@ static int ata_sg_setup(struct ata_queued_cmd *qc) int n_elem, pre_n_elem, dir, trim_sg = 0; VPRINTK("ENTER, ata%u\n", ap->id); - assert(qc->flags & ATA_QCFLAG_SG); + WARN_ON(!(qc->flags & ATA_QCFLAG_SG)); /* we must lengthen transfers to end on a 32-bit boundary */ qc->pad_len = lsg->length & 3; @@ -2830,7 +2830,7 @@ static int ata_sg_setup(struct ata_queued_cmd *qc) struct scatterlist *psg = &qc->pad_sgent; unsigned int offset; - assert(qc->dev->class == ATA_DEV_ATAPI); + WARN_ON(qc->dev->class != ATA_DEV_ATAPI); memset(pad_buf, 0, ATA_DMA_PAD_SZ); @@ -2924,7 +2924,7 @@ static unsigned long ata_pio_poll(struct ata_port *ap) unsigned int reg_state = HSM_ST_UNKNOWN; qc = ata_qc_from_tag(ap, ap->active_tag); - assert(qc != NULL); + WARN_ON(qc == NULL); switch (ap->hsm_task_state) { case HSM_ST: @@ -2992,7 +2992,7 @@ static int ata_pio_complete (struct ata_port *ap) } qc = ata_qc_from_tag(ap, ap->active_tag); - assert(qc != NULL); + WARN_ON(qc == NULL); drv_stat = ata_wait_idle(ap); if (!ata_ok(drv_stat)) { @@ -3003,7 +3003,7 @@ static int ata_pio_complete (struct ata_port *ap) ap->hsm_task_state = HSM_ST_IDLE; - assert(qc->err_mask == 0); + WARN_ON(qc->err_mask); ata_poll_qc_complete(qc); /* another command may start at this point */ @@ -3360,7 +3360,7 @@ static void ata_pio_block(struct ata_port *ap) } qc = ata_qc_from_tag(ap, ap->active_tag); - assert(qc != NULL); + WARN_ON(qc == NULL); /* check error */ if (status & (ATA_ERR | ATA_DF)) { @@ -3397,12 +3397,12 @@ static void ata_pio_error(struct ata_port *ap) printk(KERN_WARNING "ata%u: PIO error\n", ap->id); qc = ata_qc_from_tag(ap, ap->active_tag); - assert(qc != NULL); + WARN_ON(qc == NULL); /* make sure qc->err_mask is available to * know what's wrong and recover */ - assert(qc->err_mask); + WARN_ON(qc->err_mask == 0); ap->hsm_task_state = HSM_ST_IDLE; @@ -3609,7 +3609,7 @@ void ata_qc_free(struct ata_queued_cmd *qc) struct ata_port *ap = qc->ap; unsigned int tag; - assert(qc != NULL); /* ata_qc_from_tag _might_ return NULL */ + WARN_ON(qc == NULL); /* ata_qc_from_tag _might_ return NULL */ qc->flags = 0; tag = qc->tag; @@ -3623,8 +3623,8 @@ void ata_qc_free(struct ata_queued_cmd *qc) void __ata_qc_complete(struct ata_queued_cmd *qc) { - assert(qc != NULL); /* ata_qc_from_tag _might_ return NULL */ - assert(qc->flags & ATA_QCFLAG_ACTIVE); + WARN_ON(qc == NULL); /* ata_qc_from_tag _might_ return NULL */ + WARN_ON(!(qc->flags & ATA_QCFLAG_ACTIVE)); if (likely(qc->flags & ATA_QCFLAG_DMAMAP)) ata_sg_clean(qc); @@ -4155,8 +4155,8 @@ static void atapi_packet_task(void *_data) u8 status; qc = ata_qc_from_tag(ap, ap->active_tag); - assert(qc != NULL); - assert(qc->flags & ATA_QCFLAG_ACTIVE); + WARN_ON(qc == NULL); + WARN_ON(!(qc->flags & ATA_QCFLAG_ACTIVE)); /* sleep-wait for BSY to clear */ DPRINTK("busy wait\n"); @@ -4174,7 +4174,7 @@ static void atapi_packet_task(void *_data) /* send SCSI cdb */ DPRINTK("send cdb\n"); - assert(ap->cdb_len >= 12); + WARN_ON(ap->cdb_len < 12); if (qc->tf.protocol == ATA_PROT_ATAPI_DMA || qc->tf.protocol == ATA_PROT_ATAPI_NODATA) { diff --git a/drivers/scsi/libata-scsi.c b/drivers/scsi/libata-scsi.c index 9d67c6768335..26f07a2617f9 100644 --- a/drivers/scsi/libata-scsi.c +++ b/drivers/scsi/libata-scsi.c @@ -553,7 +553,7 @@ void ata_gen_ata_desc_sense(struct ata_queued_cmd *qc) /* * Read the controller registers. */ - assert(NULL != qc->ap->ops->tf_read); + WARN_ON(qc->ap->ops->tf_read == NULL); qc->ap->ops->tf_read(qc->ap, tf); /* @@ -628,7 +628,7 @@ void ata_gen_fixed_sense(struct ata_queued_cmd *qc) /* * Read the controller registers. */ - assert(NULL != qc->ap->ops->tf_read); + WARN_ON(qc->ap->ops->tf_read == NULL); qc->ap->ops->tf_read(qc->ap, tf); /* @@ -746,7 +746,7 @@ enum scsi_eh_timer_return ata_scsi_timed_out(struct scsi_cmnd *cmd) spin_lock_irqsave(&ap->host_set->lock, flags); qc = ata_qc_from_tag(ap, ap->active_tag); if (qc) { - assert(qc->scsicmd == cmd); + WARN_ON(qc->scsicmd != cmd); qc->flags |= ATA_QCFLAG_EH_SCHEDULED; qc->err_mask |= AC_ERR_TIMEOUT; ret = EH_NOT_HANDLED; @@ -780,14 +780,14 @@ int ata_scsi_error(struct Scsi_Host *host) ap = (struct ata_port *) &host->hostdata[0]; spin_lock_irqsave(&ap->host_set->lock, flags); - assert(!(ap->flags & ATA_FLAG_IN_EH)); + WARN_ON(ap->flags & ATA_FLAG_IN_EH); ap->flags |= ATA_FLAG_IN_EH; - assert(ata_qc_from_tag(ap, ap->active_tag) != NULL); + WARN_ON(ata_qc_from_tag(ap, ap->active_tag) == NULL); spin_unlock_irqrestore(&ap->host_set->lock, flags); ap->ops->eng_timeout(ap); - assert(host->host_failed == 0 && list_empty(&host->eh_cmd_q)); + WARN_ON(host->host_failed || !list_empty(&host->eh_cmd_q)); scsi_eh_flush_done_q(&ap->eh_done_q); @@ -813,7 +813,7 @@ static void __ata_eh_qc_complete(struct ata_queued_cmd *qc) spin_lock_irqsave(&ap->host_set->lock, flags); qc->scsidone = ata_eh_scsidone; __ata_qc_complete(qc); - assert(!ata_tag_valid(qc->tag)); + WARN_ON(ata_tag_valid(qc->tag)); spin_unlock_irqrestore(&ap->host_set->lock, flags); scsi_eh_finish_cmd(scmd, &ap->eh_done_q); -- cgit v1.2.1 From beec7dbc6ff003bbc94de62b3323519c878fb2ac Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Sat, 11 Feb 2006 19:11:13 +0900 Subject: [PATCH] libata: convert assert(xxx)'s in low-level drivers to WARN_ON(!xxx)'s This patch converts all assert(xxx)'s in low-level drivers to WARN_ON(!xxx)'s. After this patch, there is no in-kernel user of the libata assert() macro. Signed-off-by: Tejun Heo Signed-off-by: Jeff Garzik --- drivers/scsi/ahci.c | 2 +- drivers/scsi/sata_mv.c | 50 +++++++++++++++++++++++------------------------ drivers/scsi/sata_qstor.c | 4 ++-- drivers/scsi/sata_sx4.c | 2 +- 4 files changed, 29 insertions(+), 29 deletions(-) (limited to 'drivers/scsi') diff --git a/drivers/scsi/ahci.c b/drivers/scsi/ahci.c index 86bccb7128f9..24a54a5a91b8 100644 --- a/drivers/scsi/ahci.c +++ b/drivers/scsi/ahci.c @@ -714,7 +714,7 @@ static inline int ahci_host_intr(struct ata_port *ap, struct ata_queued_cmd *qc) ci = readl(port_mmio + PORT_CMD_ISSUE); if (likely((ci & 0x1) == 0)) { if (qc) { - assert(qc->err_mask == 0); + WARN_ON(qc->err_mask); ata_qc_complete(qc); qc = NULL; } diff --git a/drivers/scsi/sata_mv.c b/drivers/scsi/sata_mv.c index 6c80527ddd21..732cb64a4d1b 100644 --- a/drivers/scsi/sata_mv.c +++ b/drivers/scsi/sata_mv.c @@ -632,8 +632,8 @@ static void mv_irq_clear(struct ata_port *ap) * @base: port base address * @pp: port private data * - * Verify the local cache of the eDMA state is accurate with an - * assert. + * Verify the local cache of the eDMA state is accurate with a + * WARN_ON. * * LOCKING: * Inherited from caller. @@ -644,15 +644,15 @@ static void mv_start_dma(void __iomem *base, struct mv_port_priv *pp) writelfl(EDMA_EN, base + EDMA_CMD_OFS); pp->pp_flags |= MV_PP_FLAG_EDMA_EN; } - assert(EDMA_EN & readl(base + EDMA_CMD_OFS)); + WARN_ON(!(EDMA_EN & readl(base + EDMA_CMD_OFS))); } /** * mv_stop_dma - Disable eDMA engine * @ap: ATA channel to manipulate * - * Verify the local cache of the eDMA state is accurate with an - * assert. + * Verify the local cache of the eDMA state is accurate with a + * WARN_ON. * * LOCKING: * Inherited from caller. @@ -670,7 +670,7 @@ static void mv_stop_dma(struct ata_port *ap) writelfl(EDMA_DS, port_mmio + EDMA_CMD_OFS); pp->pp_flags &= ~MV_PP_FLAG_EDMA_EN; } else { - assert(!(EDMA_EN & readl(port_mmio + EDMA_CMD_OFS))); + WARN_ON(EDMA_EN & readl(port_mmio + EDMA_CMD_OFS)); } /* now properly wait for the eDMA to stop */ @@ -1061,15 +1061,15 @@ static void mv_qc_prep(struct ata_queued_cmd *qc) return; /* the req producer index should be the same as we remember it */ - assert(((readl(mv_ap_base(qc->ap) + EDMA_REQ_Q_IN_PTR_OFS) >> - EDMA_REQ_Q_PTR_SHIFT) & MV_MAX_Q_DEPTH_MASK) == - pp->req_producer); + WARN_ON(((readl(mv_ap_base(qc->ap) + EDMA_REQ_Q_IN_PTR_OFS) >> + EDMA_REQ_Q_PTR_SHIFT) & MV_MAX_Q_DEPTH_MASK) != + pp->req_producer); /* Fill in command request block */ if (!(qc->tf.flags & ATA_TFLAG_WRITE)) flags |= CRQB_FLAG_READ; - assert(MV_MAX_Q_DEPTH > qc->tag); + WARN_ON(MV_MAX_Q_DEPTH <= qc->tag); flags |= qc->tag << CRQB_TAG_SHIFT; pp->crqb[pp->req_producer].sg_addr = @@ -1152,16 +1152,16 @@ static void mv_qc_prep_iie(struct ata_queued_cmd *qc) return; /* the req producer index should be the same as we remember it */ - assert(((readl(mv_ap_base(qc->ap) + EDMA_REQ_Q_IN_PTR_OFS) >> - EDMA_REQ_Q_PTR_SHIFT) & MV_MAX_Q_DEPTH_MASK) == - pp->req_producer); + WARN_ON(((readl(mv_ap_base(qc->ap) + EDMA_REQ_Q_IN_PTR_OFS) >> + EDMA_REQ_Q_PTR_SHIFT) & MV_MAX_Q_DEPTH_MASK) != + pp->req_producer); /* Fill in Gen IIE command request block */ if (!(qc->tf.flags & ATA_TFLAG_WRITE)) flags |= CRQB_FLAG_READ; - assert(MV_MAX_Q_DEPTH > qc->tag); + WARN_ON(MV_MAX_Q_DEPTH <= qc->tag); flags |= qc->tag << CRQB_TAG_SHIFT; crqb = (struct mv_crqb_iie *) &pp->crqb[pp->req_producer]; @@ -1226,12 +1226,12 @@ static unsigned int mv_qc_issue(struct ata_queued_cmd *qc) in_ptr = readl(port_mmio + EDMA_REQ_Q_IN_PTR_OFS); /* the req producer index should be the same as we remember it */ - assert(((in_ptr >> EDMA_REQ_Q_PTR_SHIFT) & MV_MAX_Q_DEPTH_MASK) == - pp->req_producer); + WARN_ON(((in_ptr >> EDMA_REQ_Q_PTR_SHIFT) & MV_MAX_Q_DEPTH_MASK) != + pp->req_producer); /* until we do queuing, the queue should be empty at this point */ - assert(((in_ptr >> EDMA_REQ_Q_PTR_SHIFT) & MV_MAX_Q_DEPTH_MASK) == - ((readl(port_mmio + EDMA_REQ_Q_OUT_PTR_OFS) >> - EDMA_REQ_Q_PTR_SHIFT) & MV_MAX_Q_DEPTH_MASK)); + WARN_ON(((in_ptr >> EDMA_REQ_Q_PTR_SHIFT) & MV_MAX_Q_DEPTH_MASK) != + ((readl(port_mmio + EDMA_REQ_Q_OUT_PTR_OFS) >> + EDMA_REQ_Q_PTR_SHIFT) & MV_MAX_Q_DEPTH_MASK)); mv_inc_q_index(&pp->req_producer); /* now incr producer index */ @@ -1251,7 +1251,7 @@ static unsigned int mv_qc_issue(struct ata_queued_cmd *qc) * * This routine is for use when the port is in DMA mode, when it * will be using the CRPB (command response block) method of - * returning command completion information. We assert indices + * returning command completion information. We check indices * are good, grab status, and bump the response consumer index to * prove that we're up to date. * @@ -1267,16 +1267,16 @@ static u8 mv_get_crpb_status(struct ata_port *ap) out_ptr = readl(port_mmio + EDMA_RSP_Q_OUT_PTR_OFS); /* the response consumer index should be the same as we remember it */ - assert(((out_ptr >> EDMA_RSP_Q_PTR_SHIFT) & MV_MAX_Q_DEPTH_MASK) == - pp->rsp_consumer); + WARN_ON(((out_ptr >> EDMA_RSP_Q_PTR_SHIFT) & MV_MAX_Q_DEPTH_MASK) != + pp->rsp_consumer); /* increment our consumer index... */ pp->rsp_consumer = mv_inc_q_index(&pp->rsp_consumer); /* and, until we do NCQ, there should only be 1 CRPB waiting */ - assert(((readl(port_mmio + EDMA_RSP_Q_IN_PTR_OFS) >> - EDMA_RSP_Q_PTR_SHIFT) & MV_MAX_Q_DEPTH_MASK) == - pp->rsp_consumer); + WARN_ON(((readl(port_mmio + EDMA_RSP_Q_IN_PTR_OFS) >> + EDMA_RSP_Q_PTR_SHIFT) & MV_MAX_Q_DEPTH_MASK) != + pp->rsp_consumer); /* write out our inc'd consumer index so EDMA knows we're caught up */ out_ptr &= EDMA_RSP_Q_BASE_LO_MASK; diff --git a/drivers/scsi/sata_qstor.c b/drivers/scsi/sata_qstor.c index 82c3df7048ea..955131b43206 100644 --- a/drivers/scsi/sata_qstor.c +++ b/drivers/scsi/sata_qstor.c @@ -277,8 +277,8 @@ static unsigned int qs_fill_sg(struct ata_queued_cmd *qc) unsigned int nelem; u8 *prd = pp->pkt + QS_CPB_BYTES; - assert(qc->__sg != NULL); - assert(qc->n_elem > 0); + WARN_ON(qc->__sg == NULL); + WARN_ON(qc->n_elem == 0); nelem = 0; ata_for_each_sg(sg, qc) { diff --git a/drivers/scsi/sata_sx4.c b/drivers/scsi/sata_sx4.c index 212cff4fe5f5..e158f7a34d62 100644 --- a/drivers/scsi/sata_sx4.c +++ b/drivers/scsi/sata_sx4.c @@ -461,7 +461,7 @@ static void pdc20621_dma_prep(struct ata_queued_cmd *qc) unsigned int i, idx, total_len = 0, sgt_len; u32 *buf = (u32 *) &pp->dimm_buf[PDC_DIMM_HEADER_SZ]; - assert(qc->flags & ATA_QCFLAG_DMAMAP); + WARN_ON(!(qc->flags & ATA_QCFLAG_DMAMAP)); VPRINTK("ata%u: ENTER\n", ap->id); -- cgit v1.2.1 From 06ab78222bd119a0a3d8a1f89997ce902a219703 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Sun, 12 Feb 2006 15:01:49 +0900 Subject: [PATCH] libata: allow ->probe_reset to return ATA_DEV_UNKNOWN This patch makes ata_bus_probe() normalize classes[] returned by ->probe_reset such that ->probe_reset can return ATA_DEV_UNKNOWN. This eases implementation of ->probe_reset's which don't directly use ata_drive_probe_reset(). Signed-off-by: Tejun Heo Signed-off-by: Jeff Garzik --- drivers/scsi/libata-core.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) (limited to 'drivers/scsi') diff --git a/drivers/scsi/libata-core.c b/drivers/scsi/libata-core.c index cef85e515c4c..9ddb568267e1 100644 --- a/drivers/scsi/libata-core.c +++ b/drivers/scsi/libata-core.c @@ -1142,8 +1142,11 @@ static int ata_bus_probe(struct ata_port *ap) rc = ap->ops->probe_reset(ap, classes); if (rc == 0) { - for (i = 0; i < ATA_MAX_DEVICES; i++) + for (i = 0; i < ATA_MAX_DEVICES; i++) { + if (classes[i] == ATA_DEV_UNKNOWN) + classes[i] = ATA_DEV_NONE; ap->device[i].class = classes[i]; + } } else { printk(KERN_ERR "ata%u: probe reset failed, " "disabling port\n", ap->id); -- cgit v1.2.1 From 48f80e12abbc1e9034e54614c30e7c304209ce99 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Sun, 12 Feb 2006 19:05:07 +0900 Subject: [PATCH] ata_piix: kill spurious assignment in piix_sata_probe() In piix_sata_probe(), mask gets assigned unnecessarily at the beginning of the function. Kill the assignment. Signed-off-by: Tejun Heo Signed-off-by: Jeff Garzik --- drivers/scsi/ata_piix.c | 3 --- 1 file changed, 3 deletions(-) (limited to 'drivers/scsi') diff --git a/drivers/scsi/ata_piix.c b/drivers/scsi/ata_piix.c index 4933ba284885..8e0529601730 100644 --- a/drivers/scsi/ata_piix.c +++ b/drivers/scsi/ata_piix.c @@ -415,9 +415,6 @@ static int piix_sata_probe (struct ata_port *ap) int orig_mask, mask, i; u8 pcs; - mask = (PIIX_PORT_PRESENT << ap->hard_port_no) | - (PIIX_PORT_ENABLED << ap->hard_port_no); - pci_read_config_byte(pdev, ICH5_PCS, &pcs); orig_mask = (int) pcs & 0xff; -- cgit v1.2.1 From 0e949ff304a7ca07db38c17fbbf3ead1085d7bbf Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Sun, 12 Feb 2006 22:47:04 +0900 Subject: [PATCH] libata: implement ata_dev_id_c_string() ata_dev_id_c_string() reads ATA string from the specified offset of the given IDENTIFY PAGE and puts it in the specified buffer in trimmed and NULL-terminated form. The caller must supply a buffer which is one byte larger than the maximum size of the target ID string. Signed-off-by: Tejun Heo Signed-off-by: Jeff Garzik --- drivers/scsi/libata-core.c | 29 +++++++++++++++++++++++++++++ 1 file changed, 29 insertions(+) (limited to 'drivers/scsi') diff --git a/drivers/scsi/libata-core.c b/drivers/scsi/libata-core.c index 9ddb568267e1..7e410299d67a 100644 --- a/drivers/scsi/libata-core.c +++ b/drivers/scsi/libata-core.c @@ -519,6 +519,34 @@ void ata_dev_id_string(const u16 *id, unsigned char *s, } } +/** + * ata_dev_id_c_string - Convert IDENTIFY DEVICE page into C string + * @id: IDENTIFY DEVICE results we will examine + * @s: string into which data is output + * @ofs: offset into identify device page + * @len: length of string to return. must be an odd number. + * + * This function is identical to ata_dev_id_string except that it + * trims trailing spaces and terminates the resulting string with + * null. @len must be actual maximum length (even number) + 1. + * + * LOCKING: + * caller. + */ +void ata_dev_id_c_string(const u16 *id, unsigned char *s, + unsigned int ofs, unsigned int len) +{ + unsigned char *p; + + WARN_ON(!(len & 1)); + + ata_dev_id_string(id, s, ofs, len - 1); + + p = s + strnlen(s, len - 1); + while (p > s && p[-1] == ' ') + p--; + *p = '\0'; +} /** * ata_noop_dev_select - Select device 0/1 on ATA bus @@ -4905,6 +4933,7 @@ EXPORT_SYMBOL_GPL(ata_scsi_release); EXPORT_SYMBOL_GPL(ata_host_intr); EXPORT_SYMBOL_GPL(ata_dev_classify); EXPORT_SYMBOL_GPL(ata_dev_id_string); +EXPORT_SYMBOL_GPL(ata_dev_id_c_string); EXPORT_SYMBOL_GPL(ata_dev_config); EXPORT_SYMBOL_GPL(ata_scsi_simulate); EXPORT_SYMBOL_GPL(ata_eh_qc_complete); -- cgit v1.2.1 From 2e02671daa2cd69d93c828c40579bbe953f17210 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Sun, 12 Feb 2006 22:47:04 +0900 Subject: [PATCH] libata: use ata_dev_id_c_string() Use ata_dev_id_c_string() Signed-off-by: Tejun Heo Signed-off-by: Jeff Garzik --- drivers/scsi/libata-core.c | 18 ++++-------------- drivers/scsi/libata-scsi.c | 11 ++++------- drivers/scsi/sata_sil.c | 19 +++++-------------- 3 files changed, 13 insertions(+), 35 deletions(-) (limited to 'drivers/scsi') diff --git a/drivers/scsi/libata-core.c b/drivers/scsi/libata-core.c index 7e410299d67a..1d65f703348e 100644 --- a/drivers/scsi/libata-core.c +++ b/drivers/scsi/libata-core.c @@ -2301,24 +2301,14 @@ static const char * const ata_dma_blacklist [] = { static int ata_dma_blacklisted(const struct ata_device *dev) { - unsigned char model_num[40]; - char *s; - unsigned int len; + unsigned char model_num[41]; int i; - ata_dev_id_string(dev->id, model_num, ATA_ID_PROD_OFS, - sizeof(model_num)); - s = &model_num[0]; - len = strnlen(s, sizeof(model_num)); - - /* ATAPI specifies that empty space is blank-filled; remove blanks */ - while ((len > 0) && (s[len - 1] == ' ')) { - len--; - s[len] = 0; - } + ata_dev_id_c_string(dev->id, model_num, ATA_ID_PROD_OFS, + sizeof(model_num)); for (i = 0; i < ARRAY_SIZE(ata_dma_blacklist); i++) - if (!strncmp(ata_dma_blacklist[i], s, len)) + if (!strcmp(ata_dma_blacklist[i], model_num)) return 1; return 0; diff --git a/drivers/scsi/libata-scsi.c b/drivers/scsi/libata-scsi.c index 26f07a2617f9..ebd7cf42550b 100644 --- a/drivers/scsi/libata-scsi.c +++ b/drivers/scsi/libata-scsi.c @@ -1806,15 +1806,12 @@ static int ata_dev_supports_fua(u16 *id) if (!ata_id_has_fua(id)) return 0; - model[40] = '\0'; - fw[8] = '\0'; + ata_dev_id_c_string(id, model, ATA_ID_PROD_OFS, sizeof(model)); + ata_dev_id_c_string(id, fw, ATA_ID_FW_REV_OFS, sizeof(fw)); - ata_dev_id_string(id, model, ATA_ID_PROD_OFS, sizeof(model) - 1); - ata_dev_id_string(id, fw, ATA_ID_FW_REV_OFS, sizeof(fw) - 1); - - if (strncmp(model, "Maxtor", 6)) + if (strcmp(model, "Maxtor")) return 1; - if (strncmp(fw, "BANC1G10", 8)) + if (strcmp(fw, "BANC1G10")) return 1; return 0; /* blacklisted */ diff --git a/drivers/scsi/sata_sil.c b/drivers/scsi/sata_sil.c index bd2887741d78..61c4ac7ff9db 100644 --- a/drivers/scsi/sata_sil.c +++ b/drivers/scsi/sata_sil.c @@ -337,22 +337,13 @@ static void sil_scr_write (struct ata_port *ap, unsigned int sc_reg, u32 val) static void sil_dev_config(struct ata_port *ap, struct ata_device *dev) { unsigned int n, quirks = 0; - unsigned char model_num[40]; - const char *s; - unsigned int len; + unsigned char model_num[41]; - ata_dev_id_string(dev->id, model_num, ATA_ID_PROD_OFS, - sizeof(model_num)); - s = &model_num[0]; - len = strnlen(s, sizeof(model_num)); - - /* ATAPI specifies that empty space is blank-filled; remove blanks */ - while ((len > 0) && (s[len - 1] == ' ')) - len--; + ata_dev_id_c_string(dev->id, model_num, ATA_ID_PROD_OFS, + sizeof(model_num)); for (n = 0; sil_blacklist[n].product; n++) - if (!memcmp(sil_blacklist[n].product, s, - strlen(sil_blacklist[n].product))) { + if (!strcmp(sil_blacklist[n].product, model_num)) { quirks = sil_blacklist[n].quirk; break; } @@ -372,7 +363,7 @@ static void sil_dev_config(struct ata_port *ap, struct ata_device *dev) /* limit to udma5 */ if (quirks & SIL_QUIRK_UDMA5MAX) { printk(KERN_INFO "ata%u(%u): applying Maxtor errata fix %s\n", - ap->id, dev->devno, s); + ap->id, dev->devno, model_num); ap->udma_mask &= ATA_UDMA5; return; } -- cgit v1.2.1 From 2940740bcaa5948967d261dfceec04f40b2d2fa1 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Sun, 12 Feb 2006 22:47:04 +0900 Subject: [PATCH] libata: separate out ata_id_n_sectors() Separate out n_sectors calculation into ata_id_n_sectors() from ata_dev_identify(). This will be used by revalidation. Signed-off-by: Tejun Heo Signed-off-by: Jeff Garzik --- drivers/scsi/libata-core.c | 26 ++++++++++++++++++-------- 1 file changed, 18 insertions(+), 8 deletions(-) (limited to 'drivers/scsi') diff --git a/drivers/scsi/libata-core.c b/drivers/scsi/libata-core.c index 1d65f703348e..4df5024c3888 100644 --- a/drivers/scsi/libata-core.c +++ b/drivers/scsi/libata-core.c @@ -548,6 +548,21 @@ void ata_dev_id_c_string(const u16 *id, unsigned char *s, *p = '\0'; } +static u64 ata_id_n_sectors(const u16 *id) +{ + if (ata_id_has_lba(id)) { + if (ata_id_has_lba48(id)) + return ata_id_u64(id, 100); + else + return ata_id_u32(id, 60); + } else { + if (ata_id_current_chs_valid(id)) + return ata_id_u32(id, 57); + else + return id[1] * id[3] * id[6]; + } +} + /** * ata_noop_dev_select - Select device 0/1 on ATA bus * @ap: ATA channel to manipulate @@ -1009,6 +1024,8 @@ retry: /* ATA-specific feature tests */ if (dev->class == ATA_DEV_ATA) { + dev->n_sectors = ata_id_n_sectors(dev->id); + if (!ata_id_is_ata(dev->id)) /* sanity check */ goto err_out_nosup; @@ -1038,12 +1055,8 @@ retry: if (ata_id_has_lba(dev->id)) { dev->flags |= ATA_DFLAG_LBA; - if (ata_id_has_lba48(dev->id)) { + if (ata_id_has_lba48(dev->id)) dev->flags |= ATA_DFLAG_LBA48; - dev->n_sectors = ata_id_u64(dev->id, 100); - } else { - dev->n_sectors = ata_id_u32(dev->id, 60); - } /* print device info to dmesg */ printk(KERN_INFO "ata%u: dev %u ATA-%d, max %s, %Lu sectors:%s\n", @@ -1059,15 +1072,12 @@ retry: dev->cylinders = dev->id[1]; dev->heads = dev->id[3]; dev->sectors = dev->id[6]; - dev->n_sectors = dev->cylinders * dev->heads * dev->sectors; if (ata_id_current_chs_valid(dev->id)) { /* Current CHS translation is valid. */ dev->cylinders = dev->id[54]; dev->heads = dev->id[55]; dev->sectors = dev->id[56]; - - dev->n_sectors = ata_id_u32(dev->id, 57); } /* print device info to dmesg */ -- cgit v1.2.1 From 3d2ca91095f8ab6dc0cb925374eec62fa5336764 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Sun, 12 Feb 2006 22:47:04 +0900 Subject: [PATCH] libata: separate out ata_id_major_version() Separate out ATA major version calculation from ata_dev_identify() into ata_id_major_version(). It's preparation for splitting ata_dev_identify(). Signed-off-by: Tejun Heo Signed-off-by: Jeff Garzik --- drivers/scsi/libata-core.c | 6 +----- 1 file changed, 1 insertion(+), 5 deletions(-) (limited to 'drivers/scsi') diff --git a/drivers/scsi/libata-core.c b/drivers/scsi/libata-core.c index 4df5024c3888..d87854e199f6 100644 --- a/drivers/scsi/libata-core.c +++ b/drivers/scsi/libata-core.c @@ -927,7 +927,6 @@ static void ata_dev_identify(struct ata_port *ap, unsigned int device) { struct ata_device *dev = &ap->device[device]; unsigned int major_version; - u16 tmp; unsigned long xfer_modes; unsigned int using_edd; struct ata_taskfile tf; @@ -1030,10 +1029,7 @@ retry: goto err_out_nosup; /* get major version */ - tmp = dev->id[ATA_ID_MAJOR_VER]; - for (major_version = 14; major_version >= 1; major_version--) - if (tmp & (1 << major_version)) - break; + major_version = ata_id_major_version(dev->id); /* * The exact sequence expected by certain pre-ATA4 drives is: -- cgit v1.2.1 From 0bd3300ac9158b6ceef38fab6fb473765a40e77e Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Sun, 12 Feb 2006 22:47:05 +0900 Subject: [PATCH] libata: make ata_dump_id() take @id instead of @dev Make ata_dump_id() take @id instead of @dev. This is preparation for splitting ata_dev_identify(). Signed-off-by: Tejun Heo Signed-off-by: Jeff Garzik --- drivers/scsi/libata-core.c | 36 ++++++++++++++++++------------------ 1 file changed, 18 insertions(+), 18 deletions(-) (limited to 'drivers/scsi') diff --git a/drivers/scsi/libata-core.c b/drivers/scsi/libata-core.c index d87854e199f6..a0b6ca3d1a0c 100644 --- a/drivers/scsi/libata-core.c +++ b/drivers/scsi/libata-core.c @@ -651,41 +651,41 @@ void ata_dev_select(struct ata_port *ap, unsigned int device, /** * ata_dump_id - IDENTIFY DEVICE info debugging output - * @dev: Device whose IDENTIFY DEVICE page we will dump + * @id: IDENTIFY DEVICE page to dump * - * Dump selected 16-bit words from a detected device's - * IDENTIFY PAGE page. + * Dump selected 16-bit words from the given IDENTIFY DEVICE + * page. * * LOCKING: * caller. */ -static inline void ata_dump_id(const struct ata_device *dev) +static inline void ata_dump_id(const u16 *id) { DPRINTK("49==0x%04x " "53==0x%04x " "63==0x%04x " "64==0x%04x " "75==0x%04x \n", - dev->id[49], - dev->id[53], - dev->id[63], - dev->id[64], - dev->id[75]); + id[49], + id[53], + id[63], + id[64], + id[75]); DPRINTK("80==0x%04x " "81==0x%04x " "82==0x%04x " "83==0x%04x " "84==0x%04x \n", - dev->id[80], - dev->id[81], - dev->id[82], - dev->id[83], - dev->id[84]); + id[80], + id[81], + id[82], + id[83], + id[84]); DPRINTK("88==0x%04x " "93==0x%04x\n", - dev->id[88], - dev->id[93]); + id[88], + id[93]); } /* @@ -1019,7 +1019,7 @@ retry: if (!xfer_modes) xfer_modes = ata_pio_modes(dev); - ata_dump_id(dev); + ata_dump_id(dev->id); /* ATA-specific feature tests */ if (dev->class == ATA_DEV_ATA) { @@ -2510,7 +2510,7 @@ static void ata_dev_reread_id(struct ata_port *ap, struct ata_device *dev) swap_buf_le16(dev->id, ATA_ID_WORDS); - ata_dump_id(dev); + ata_dump_id(dev->id); DPRINTK("EXIT\n"); -- cgit v1.2.1 From 61eb066affc02e16c548aef8b876c49c84113f40 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Sun, 12 Feb 2006 23:22:37 +0900 Subject: [PATCH] libata: don't do EDD handling if ->probe_reset is used EDD is never used with ->probe_reset. Don't handle EDD special case in ata_dev_identify if ->probe_reset is in use. Signed-off-by: Tejun Heo Signed-off-by: Jeff Garzik --- drivers/scsi/libata-core.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers/scsi') diff --git a/drivers/scsi/libata-core.c b/drivers/scsi/libata-core.c index a0b6ca3d1a0c..21ae752cd95c 100644 --- a/drivers/scsi/libata-core.c +++ b/drivers/scsi/libata-core.c @@ -939,7 +939,8 @@ static void ata_dev_identify(struct ata_port *ap, unsigned int device) return; } - if (ap->flags & (ATA_FLAG_SRST | ATA_FLAG_SATA_RESET)) + if (ap->ops->probe_reset || + ap->flags & (ATA_FLAG_SRST | ATA_FLAG_SATA_RESET)) using_edd = 0; else using_edd = 1; -- cgit v1.2.1 From 8eabd02c246b808e0e27c3ee9ea17d0349efb06d Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Sun, 12 Feb 2006 23:32:58 +0900 Subject: [PATCH] libata: make ata_dev_knobble() per-device ata_dev_knobble() unconditionally used the first device of the port to determine whether a device is bridged or not. This causes bridge limit to be incorrectly applied or unapplied for hosts with slave devices (e.g. ata_piix). Signed-off-by: Tejun Heo Signed-off-by: Jeff Garzik --- drivers/scsi/libata-core.c | 9 +++++---- 1 file changed, 5 insertions(+), 4 deletions(-) (limited to 'drivers/scsi') diff --git a/drivers/scsi/libata-core.c b/drivers/scsi/libata-core.c index 21ae752cd95c..5e8a32052a1e 100644 --- a/drivers/scsi/libata-core.c +++ b/drivers/scsi/libata-core.c @@ -1121,9 +1121,10 @@ err_out: } -static inline u8 ata_dev_knobble(const struct ata_port *ap) +static inline u8 ata_dev_knobble(const struct ata_port *ap, + struct ata_device *dev) { - return ((ap->cbl == ATA_CBL_SATA) && (!ata_id_is_sata(ap->device->id))); + return ((ap->cbl == ATA_CBL_SATA) && (!ata_id_is_sata(dev->id))); } /** @@ -1137,9 +1138,9 @@ static inline u8 ata_dev_knobble(const struct ata_port *ap) void ata_dev_config(struct ata_port *ap, unsigned int i) { /* limit bridge transfers to udma5, 200 sectors */ - if (ata_dev_knobble(ap)) { + if (ata_dev_knobble(ap, &ap->device[i])) { printk(KERN_INFO "ata%u(%u): applying bridge limits\n", - ap->id, ap->device->devno); + ap->id, i); ap->udma_mask &= ATA_UDMA5; ap->host->max_sectors = ATA_MAX_SECTORS; ap->host->hostt->max_sectors = ATA_MAX_SECTORS; -- cgit v1.2.1 From 6e7846e9c548443c86cfbad9e4defb4bdcfc538b Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Sun, 12 Feb 2006 23:32:58 +0900 Subject: [PATCH] libata: move cdb_len for host to device cdb_len is per-device property. Sharing cdb_len on ap results in inaccurate configuration on revalidation and hotplugging. This patch makes cdb_len per-device. Signed-off-by: Tejun Heo Signed-off-by: Jeff Garzik --- drivers/scsi/ahci.c | 3 ++- drivers/scsi/libata-core.c | 19 ++++++++++++------- drivers/scsi/libata-scsi.c | 4 ++-- drivers/scsi/sata_sil24.c | 4 ++-- 4 files changed, 18 insertions(+), 12 deletions(-) (limited to 'drivers/scsi') diff --git a/drivers/scsi/ahci.c b/drivers/scsi/ahci.c index 24a54a5a91b8..23caa0c4019b 100644 --- a/drivers/scsi/ahci.c +++ b/drivers/scsi/ahci.c @@ -617,7 +617,8 @@ static void ahci_qc_prep(struct ata_queued_cmd *qc) ata_tf_to_fis(&qc->tf, pp->cmd_tbl, 0); if (is_atapi) { memset(pp->cmd_tbl + AHCI_CMD_TBL_CDB, 0, 32); - memcpy(pp->cmd_tbl + AHCI_CMD_TBL_CDB, qc->cdb, ap->cdb_len); + memcpy(pp->cmd_tbl + AHCI_CMD_TBL_CDB, qc->cdb, + qc->dev->cdb_len); } n_elem = 0; diff --git a/drivers/scsi/libata-core.c b/drivers/scsi/libata-core.c index 5e8a32052a1e..1a373b4d0e22 100644 --- a/drivers/scsi/libata-core.c +++ b/drivers/scsi/libata-core.c @@ -931,7 +931,7 @@ static void ata_dev_identify(struct ata_port *ap, unsigned int device) unsigned int using_edd; struct ata_taskfile tf; unsigned int err_mask; - int rc; + int i, rc; if (!ata_dev_present(dev)) { DPRINTK("ENTER/EXIT (host %u, dev %u) -- nodev\n", @@ -1087,7 +1087,7 @@ retry: } - ap->host->max_cmd_len = 16; + dev->cdb_len = 16; } /* ATAPI-specific feature tests */ @@ -1100,8 +1100,7 @@ retry: printk(KERN_WARNING "ata%u: unsupported CDB len\n", ap->id); goto err_out_nosup; } - ap->cdb_len = (unsigned int) rc; - ap->host->max_cmd_len = (unsigned char) ap->cdb_len; + dev->cdb_len = (unsigned int) rc; /* print device info to dmesg */ printk(KERN_INFO "ata%u: dev %u ATAPI, max %s\n", @@ -1109,6 +1108,12 @@ retry: ata_mode_string(xfer_modes)); } + ap->host->max_cmd_len = 0; + for (i = 0; i < ATA_MAX_DEVICES; i++) + ap->host->max_cmd_len = max_t(unsigned int, + ap->host->max_cmd_len, + ap->device[i].cdb_len); + DPRINTK("EXIT, drv_stat = 0x%x\n", ata_chk_status(ap)); return; @@ -4203,7 +4208,7 @@ static void atapi_packet_task(void *_data) /* send SCSI cdb */ DPRINTK("send cdb\n"); - WARN_ON(ap->cdb_len < 12); + WARN_ON(qc->dev->cdb_len < 12); if (qc->tf.protocol == ATA_PROT_ATAPI_DMA || qc->tf.protocol == ATA_PROT_ATAPI_NODATA) { @@ -4217,12 +4222,12 @@ static void atapi_packet_task(void *_data) */ spin_lock_irqsave(&ap->host_set->lock, flags); ap->flags &= ~ATA_FLAG_NOINTR; - ata_data_xfer(ap, qc->cdb, ap->cdb_len, 1); + ata_data_xfer(ap, qc->cdb, qc->dev->cdb_len, 1); if (qc->tf.protocol == ATA_PROT_ATAPI_DMA) ap->ops->bmdma_start(qc); /* initiate bmdma */ spin_unlock_irqrestore(&ap->host_set->lock, flags); } else { - ata_data_xfer(ap, qc->cdb, ap->cdb_len, 1); + ata_data_xfer(ap, qc->cdb, qc->dev->cdb_len, 1); /* PIO commands are handled by polling */ ap->hsm_task_state = HSM_ST; diff --git a/drivers/scsi/libata-scsi.c b/drivers/scsi/libata-scsi.c index ebd7cf42550b..3628fedc9865 100644 --- a/drivers/scsi/libata-scsi.c +++ b/drivers/scsi/libata-scsi.c @@ -2146,7 +2146,7 @@ static void atapi_request_sense(struct ata_queued_cmd *qc) ata_sg_init_one(qc, cmd->sense_buffer, sizeof(cmd->sense_buffer)); qc->dma_dir = DMA_FROM_DEVICE; - memset(&qc->cdb, 0, ap->cdb_len); + memset(&qc->cdb, 0, qc->dev->cdb_len); qc->cdb[0] = REQUEST_SENSE; qc->cdb[4] = SCSI_SENSE_BUFFERSIZE; @@ -2248,7 +2248,7 @@ static unsigned int atapi_xlat(struct ata_queued_cmd *qc, const u8 *scsicmd) if (ata_check_atapi_dma(qc)) using_pio = 1; - memcpy(&qc->cdb, scsicmd, qc->ap->cdb_len); + memcpy(&qc->cdb, scsicmd, dev->cdb_len); qc->complete_fn = atapi_qc_complete; diff --git a/drivers/scsi/sata_sil24.c b/drivers/scsi/sata_sil24.c index 228a7fabffff..24020c68903a 100644 --- a/drivers/scsi/sata_sil24.c +++ b/drivers/scsi/sata_sil24.c @@ -371,7 +371,7 @@ static void sil24_dev_config(struct ata_port *ap, struct ata_device *dev) { void __iomem *port = (void __iomem *)ap->ioaddr.cmd_addr; - if (ap->cdb_len == 16) + if (dev->cdb_len == 16) writel(PORT_CS_CDB16, port + PORT_CTRL_STAT); else writel(PORT_CS_CDB16, port + PORT_CTRL_CLR); @@ -543,7 +543,7 @@ static void sil24_qc_prep(struct ata_queued_cmd *qc) prb = &cb->atapi.prb; sge = cb->atapi.sge; memset(cb->atapi.cdb, 0, 32); - memcpy(cb->atapi.cdb, qc->cdb, ap->cdb_len); + memcpy(cb->atapi.cdb, qc->cdb, qc->dev->cdb_len); if (qc->tf.protocol != ATA_PROT_ATAPI_NODATA) { if (qc->tf.flags & ATA_TFLAG_WRITE) -- cgit v1.2.1 From b00eec1d58ee71131375bfeb86e64bceec3f5618 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Sun, 12 Feb 2006 23:32:59 +0900 Subject: [PATCH] libata: add per-device max_sectors If a low level driver wants to control max_sectors, it had to adjust ap->host->max_sectors and set ATA_DFLAG_LOCK_SECTORS to tell ata_scsi_slave_config not to override the limit. This is not only cumbersome but also incorrect for hosts which support more than one devices per port. This patch adds per-device ->max_sectors. If the field is unset (zero), libata core layer will adjust ->max_sectors according to default rules. If the field is set, libata honors the setting. Signed-off-by: Tejun Heo Signed-off-by: Jeff Garzik --- drivers/scsi/libata-core.c | 4 +--- drivers/scsi/libata-scsi.c | 18 +++++++++--------- drivers/scsi/sata_sil.c | 4 +--- 3 files changed, 11 insertions(+), 15 deletions(-) (limited to 'drivers/scsi') diff --git a/drivers/scsi/libata-core.c b/drivers/scsi/libata-core.c index 1a373b4d0e22..61cba39a6834 100644 --- a/drivers/scsi/libata-core.c +++ b/drivers/scsi/libata-core.c @@ -1147,9 +1147,7 @@ void ata_dev_config(struct ata_port *ap, unsigned int i) printk(KERN_INFO "ata%u(%u): applying bridge limits\n", ap->id, i); ap->udma_mask &= ATA_UDMA5; - ap->host->max_sectors = ATA_MAX_SECTORS; - ap->host->hostt->max_sectors = ATA_MAX_SECTORS; - ap->device[i].flags |= ATA_DFLAG_LOCK_SECTORS; + ap->device[i].max_sectors = ATA_MAX_SECTORS; } if (ap->ops->dev_config) diff --git a/drivers/scsi/libata-scsi.c b/drivers/scsi/libata-scsi.c index 3628fedc9865..86da46502b3e 100644 --- a/drivers/scsi/libata-scsi.c +++ b/drivers/scsi/libata-scsi.c @@ -684,23 +684,23 @@ int ata_scsi_slave_config(struct scsi_device *sdev) if (sdev->id < ATA_MAX_DEVICES) { struct ata_port *ap; struct ata_device *dev; + unsigned int max_sectors; ap = (struct ata_port *) &sdev->host->hostdata[0]; dev = &ap->device[sdev->id]; - /* TODO: 1024 is an arbitrary number, not the + /* TODO: 2048 is an arbitrary number, not the * hardware maximum. This should be increased to * 65534 when Jens Axboe's patch for dynamically * determining max_sectors is merged. */ - if ((dev->flags & ATA_DFLAG_LBA48) && - ((dev->flags & ATA_DFLAG_LOCK_SECTORS) == 0)) { - /* - * do not overwrite sdev->host->max_sectors, since - * other drives on this host may not support LBA48 - */ - blk_queue_max_sectors(sdev->request_queue, 2048); - } + max_sectors = ATA_MAX_SECTORS; + if (dev->flags & ATA_DFLAG_LBA48) + max_sectors = 2048; + if (dev->max_sectors) + max_sectors = dev->max_sectors; + + blk_queue_max_sectors(sdev->request_queue, max_sectors); /* * SATA DMA transfers must be multiples of 4 byte, so diff --git a/drivers/scsi/sata_sil.c b/drivers/scsi/sata_sil.c index 61c4ac7ff9db..6c482c8be254 100644 --- a/drivers/scsi/sata_sil.c +++ b/drivers/scsi/sata_sil.c @@ -354,9 +354,7 @@ static void sil_dev_config(struct ata_port *ap, struct ata_device *dev) (quirks & SIL_QUIRK_MOD15WRITE))) { printk(KERN_INFO "ata%u(%u): applying Seagate errata fix (mod15write workaround)\n", ap->id, dev->devno); - ap->host->max_sectors = 15; - ap->host->hostt->max_sectors = 15; - dev->flags |= ATA_DFLAG_LOCK_SECTORS; + dev->max_sectors = 15; return; } -- cgit v1.2.1 From 49430f97dd952eda60848bf6bf161b4917ba103d Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Sun, 12 Feb 2006 23:32:59 +0900 Subject: [PATCH] libata: kill sht->max_sectors The previous dev->max_sectors patch made sht->max_sectors meaningless. Kill all initializations of sht->max_sectors. Signed-off-by: Tejun Heo Signed-off-by: Jeff Garzik --- drivers/scsi/ahci.c | 1 - drivers/scsi/ata_piix.c | 1 - drivers/scsi/pdc_adma.c | 1 - drivers/scsi/sata_mv.c | 1 - drivers/scsi/sata_nv.c | 1 - drivers/scsi/sata_promise.c | 1 - drivers/scsi/sata_qstor.c | 1 - drivers/scsi/sata_sil.c | 1 - drivers/scsi/sata_sil24.c | 1 - drivers/scsi/sata_sis.c | 1 - drivers/scsi/sata_svw.c | 1 - drivers/scsi/sata_sx4.c | 1 - drivers/scsi/sata_uli.c | 1 - drivers/scsi/sata_via.c | 1 - drivers/scsi/sata_vsc.c | 1 - 15 files changed, 15 deletions(-) (limited to 'drivers/scsi') diff --git a/drivers/scsi/ahci.c b/drivers/scsi/ahci.c index 23caa0c4019b..1c2ab3dede71 100644 --- a/drivers/scsi/ahci.c +++ b/drivers/scsi/ahci.c @@ -211,7 +211,6 @@ static struct scsi_host_template ahci_sht = { .can_queue = ATA_DEF_QUEUE, .this_id = ATA_SHT_THIS_ID, .sg_tablesize = AHCI_MAX_SG, - .max_sectors = ATA_MAX_SECTORS, .cmd_per_lun = ATA_SHT_CMD_PER_LUN, .emulated = ATA_SHT_EMULATED, .use_clustering = AHCI_USE_CLUSTERING, diff --git a/drivers/scsi/ata_piix.c b/drivers/scsi/ata_piix.c index 8e0529601730..4cc1108f721a 100644 --- a/drivers/scsi/ata_piix.c +++ b/drivers/scsi/ata_piix.c @@ -185,7 +185,6 @@ static struct scsi_host_template piix_sht = { .can_queue = ATA_DEF_QUEUE, .this_id = ATA_SHT_THIS_ID, .sg_tablesize = LIBATA_MAX_PRD, - .max_sectors = ATA_MAX_SECTORS, .cmd_per_lun = ATA_SHT_CMD_PER_LUN, .emulated = ATA_SHT_EMULATED, .use_clustering = ATA_SHT_USE_CLUSTERING, diff --git a/drivers/scsi/pdc_adma.c b/drivers/scsi/pdc_adma.c index d0ad3ebe9685..5f33cc932e70 100644 --- a/drivers/scsi/pdc_adma.c +++ b/drivers/scsi/pdc_adma.c @@ -148,7 +148,6 @@ static struct scsi_host_template adma_ata_sht = { .can_queue = ATA_DEF_QUEUE, .this_id = ATA_SHT_THIS_ID, .sg_tablesize = LIBATA_MAX_PRD, - .max_sectors = ATA_MAX_SECTORS, .cmd_per_lun = ATA_SHT_CMD_PER_LUN, .emulated = ATA_SHT_EMULATED, .use_clustering = ENABLE_CLUSTERING, diff --git a/drivers/scsi/sata_mv.c b/drivers/scsi/sata_mv.c index 732cb64a4d1b..c158de2e757d 100644 --- a/drivers/scsi/sata_mv.c +++ b/drivers/scsi/sata_mv.c @@ -383,7 +383,6 @@ static struct scsi_host_template mv_sht = { .can_queue = MV_USE_Q_DEPTH, .this_id = ATA_SHT_THIS_ID, .sg_tablesize = MV_MAX_SG_CT / 2, - .max_sectors = ATA_MAX_SECTORS, .cmd_per_lun = ATA_SHT_CMD_PER_LUN, .emulated = ATA_SHT_EMULATED, .use_clustering = ATA_SHT_USE_CLUSTERING, diff --git a/drivers/scsi/sata_nv.c b/drivers/scsi/sata_nv.c index cdfeb9aa600b..caffadc2e0ae 100644 --- a/drivers/scsi/sata_nv.c +++ b/drivers/scsi/sata_nv.c @@ -234,7 +234,6 @@ static struct scsi_host_template nv_sht = { .can_queue = ATA_DEF_QUEUE, .this_id = ATA_SHT_THIS_ID, .sg_tablesize = LIBATA_MAX_PRD, - .max_sectors = ATA_MAX_SECTORS, .cmd_per_lun = ATA_SHT_CMD_PER_LUN, .emulated = ATA_SHT_EMULATED, .use_clustering = ATA_SHT_USE_CLUSTERING, diff --git a/drivers/scsi/sata_promise.c b/drivers/scsi/sata_promise.c index c9dfd9370919..ba2b7a0983db 100644 --- a/drivers/scsi/sata_promise.c +++ b/drivers/scsi/sata_promise.c @@ -116,7 +116,6 @@ static struct scsi_host_template pdc_ata_sht = { .can_queue = ATA_DEF_QUEUE, .this_id = ATA_SHT_THIS_ID, .sg_tablesize = LIBATA_MAX_PRD, - .max_sectors = ATA_MAX_SECTORS, .cmd_per_lun = ATA_SHT_CMD_PER_LUN, .emulated = ATA_SHT_EMULATED, .use_clustering = ATA_SHT_USE_CLUSTERING, diff --git a/drivers/scsi/sata_qstor.c b/drivers/scsi/sata_qstor.c index 955131b43206..286482630be3 100644 --- a/drivers/scsi/sata_qstor.c +++ b/drivers/scsi/sata_qstor.c @@ -137,7 +137,6 @@ static struct scsi_host_template qs_ata_sht = { .can_queue = ATA_DEF_QUEUE, .this_id = ATA_SHT_THIS_ID, .sg_tablesize = QS_MAX_PRD, - .max_sectors = ATA_MAX_SECTORS, .cmd_per_lun = ATA_SHT_CMD_PER_LUN, .emulated = ATA_SHT_EMULATED, //FIXME .use_clustering = ATA_SHT_USE_CLUSTERING, diff --git a/drivers/scsi/sata_sil.c b/drivers/scsi/sata_sil.c index 6c482c8be254..15346888faf2 100644 --- a/drivers/scsi/sata_sil.c +++ b/drivers/scsi/sata_sil.c @@ -140,7 +140,6 @@ static struct scsi_host_template sil_sht = { .can_queue = ATA_DEF_QUEUE, .this_id = ATA_SHT_THIS_ID, .sg_tablesize = LIBATA_MAX_PRD, - .max_sectors = ATA_MAX_SECTORS, .cmd_per_lun = ATA_SHT_CMD_PER_LUN, .emulated = ATA_SHT_EMULATED, .use_clustering = ATA_SHT_USE_CLUSTERING, diff --git a/drivers/scsi/sata_sil24.c b/drivers/scsi/sata_sil24.c index 24020c68903a..a0e35a262156 100644 --- a/drivers/scsi/sata_sil24.c +++ b/drivers/scsi/sata_sil24.c @@ -285,7 +285,6 @@ static struct scsi_host_template sil24_sht = { .can_queue = ATA_DEF_QUEUE, .this_id = ATA_SHT_THIS_ID, .sg_tablesize = LIBATA_MAX_PRD, - .max_sectors = ATA_MAX_SECTORS, .cmd_per_lun = ATA_SHT_CMD_PER_LUN, .emulated = ATA_SHT_EMULATED, .use_clustering = ATA_SHT_USE_CLUSTERING, diff --git a/drivers/scsi/sata_sis.c b/drivers/scsi/sata_sis.c index 2f1815715705..7fd45f86de99 100644 --- a/drivers/scsi/sata_sis.c +++ b/drivers/scsi/sata_sis.c @@ -92,7 +92,6 @@ static struct scsi_host_template sis_sht = { .can_queue = ATA_DEF_QUEUE, .this_id = ATA_SHT_THIS_ID, .sg_tablesize = ATA_MAX_PRD, - .max_sectors = ATA_MAX_SECTORS, .cmd_per_lun = ATA_SHT_CMD_PER_LUN, .emulated = ATA_SHT_EMULATED, .use_clustering = ATA_SHT_USE_CLUSTERING, diff --git a/drivers/scsi/sata_svw.c b/drivers/scsi/sata_svw.c index f369c3003adf..4aaccd53e736 100644 --- a/drivers/scsi/sata_svw.c +++ b/drivers/scsi/sata_svw.c @@ -293,7 +293,6 @@ static struct scsi_host_template k2_sata_sht = { .can_queue = ATA_DEF_QUEUE, .this_id = ATA_SHT_THIS_ID, .sg_tablesize = LIBATA_MAX_PRD, - .max_sectors = ATA_MAX_SECTORS, .cmd_per_lun = ATA_SHT_CMD_PER_LUN, .emulated = ATA_SHT_EMULATED, .use_clustering = ATA_SHT_USE_CLUSTERING, diff --git a/drivers/scsi/sata_sx4.c b/drivers/scsi/sata_sx4.c index e158f7a34d62..9f8a76815402 100644 --- a/drivers/scsi/sata_sx4.c +++ b/drivers/scsi/sata_sx4.c @@ -187,7 +187,6 @@ static struct scsi_host_template pdc_sata_sht = { .can_queue = ATA_DEF_QUEUE, .this_id = ATA_SHT_THIS_ID, .sg_tablesize = LIBATA_MAX_PRD, - .max_sectors = ATA_MAX_SECTORS, .cmd_per_lun = ATA_SHT_CMD_PER_LUN, .emulated = ATA_SHT_EMULATED, .use_clustering = ATA_SHT_USE_CLUSTERING, diff --git a/drivers/scsi/sata_uli.c b/drivers/scsi/sata_uli.c index c500f2490902..37a487b7d655 100644 --- a/drivers/scsi/sata_uli.c +++ b/drivers/scsi/sata_uli.c @@ -80,7 +80,6 @@ static struct scsi_host_template uli_sht = { .can_queue = ATA_DEF_QUEUE, .this_id = ATA_SHT_THIS_ID, .sg_tablesize = LIBATA_MAX_PRD, - .max_sectors = ATA_MAX_SECTORS, .cmd_per_lun = ATA_SHT_CMD_PER_LUN, .emulated = ATA_SHT_EMULATED, .use_clustering = ATA_SHT_USE_CLUSTERING, diff --git a/drivers/scsi/sata_via.c b/drivers/scsi/sata_via.c index 2e20887dc88f..ff65a0b0457f 100644 --- a/drivers/scsi/sata_via.c +++ b/drivers/scsi/sata_via.c @@ -99,7 +99,6 @@ static struct scsi_host_template svia_sht = { .can_queue = ATA_DEF_QUEUE, .this_id = ATA_SHT_THIS_ID, .sg_tablesize = LIBATA_MAX_PRD, - .max_sectors = ATA_MAX_SECTORS, .cmd_per_lun = ATA_SHT_CMD_PER_LUN, .emulated = ATA_SHT_EMULATED, .use_clustering = ATA_SHT_USE_CLUSTERING, diff --git a/drivers/scsi/sata_vsc.c b/drivers/scsi/sata_vsc.c index cf1f8a61bda0..e124db8e8284 100644 --- a/drivers/scsi/sata_vsc.c +++ b/drivers/scsi/sata_vsc.c @@ -228,7 +228,6 @@ static struct scsi_host_template vsc_sata_sht = { .can_queue = ATA_DEF_QUEUE, .this_id = ATA_SHT_THIS_ID, .sg_tablesize = LIBATA_MAX_PRD, - .max_sectors = ATA_MAX_SECTORS, .cmd_per_lun = ATA_SHT_CMD_PER_LUN, .emulated = ATA_SHT_EMULATED, .use_clustering = ATA_SHT_USE_CLUSTERING, -- cgit v1.2.1 From 6a62a04d4705df4f9f9bee39e889b9e920eeca47 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Mon, 13 Feb 2006 10:02:46 +0900 Subject: [PATCH] libata: rename ata_dev_id_[c_]string() This patch renames ata_dev_id_[c_]string() to ata_id_[c_]string(). All other functions which read data from ATA ID data start with ata_id and those two function names were getting too long. Signed-off-by: Tejun Heo Signed-off-by: Jeff Garzik --- drivers/scsi/libata-core.c | 23 +++++++++++------------ drivers/scsi/libata-scsi.c | 12 ++++++------ drivers/scsi/sata_sil.c | 3 +-- 3 files changed, 18 insertions(+), 20 deletions(-) (limited to 'drivers/scsi') diff --git a/drivers/scsi/libata-core.c b/drivers/scsi/libata-core.c index adc5b440c9bc..d694b20e81bf 100644 --- a/drivers/scsi/libata-core.c +++ b/drivers/scsi/libata-core.c @@ -486,7 +486,7 @@ ata_dev_try_classify(struct ata_port *ap, unsigned int device, u8 *r_err) } /** - * ata_dev_id_string - Convert IDENTIFY DEVICE page into string + * ata_id_string - Convert IDENTIFY DEVICE page into string * @id: IDENTIFY DEVICE results we will examine * @s: string into which data is output * @ofs: offset into identify device page @@ -500,8 +500,8 @@ ata_dev_try_classify(struct ata_port *ap, unsigned int device, u8 *r_err) * caller. */ -void ata_dev_id_string(const u16 *id, unsigned char *s, - unsigned int ofs, unsigned int len) +void ata_id_string(const u16 *id, unsigned char *s, + unsigned int ofs, unsigned int len) { unsigned int c; @@ -520,27 +520,27 @@ void ata_dev_id_string(const u16 *id, unsigned char *s, } /** - * ata_dev_id_c_string - Convert IDENTIFY DEVICE page into C string + * ata_id_c_string - Convert IDENTIFY DEVICE page into C string * @id: IDENTIFY DEVICE results we will examine * @s: string into which data is output * @ofs: offset into identify device page * @len: length of string to return. must be an odd number. * - * This function is identical to ata_dev_id_string except that it + * This function is identical to ata_id_string except that it * trims trailing spaces and terminates the resulting string with * null. @len must be actual maximum length (even number) + 1. * * LOCKING: * caller. */ -void ata_dev_id_c_string(const u16 *id, unsigned char *s, - unsigned int ofs, unsigned int len) +void ata_id_c_string(const u16 *id, unsigned char *s, + unsigned int ofs, unsigned int len) { unsigned char *p; WARN_ON(!(len & 1)); - ata_dev_id_string(id, s, ofs, len - 1); + ata_id_string(id, s, ofs, len - 1); p = s + strnlen(s, len - 1); while (p > s && p[-1] == ' ') @@ -2315,8 +2315,7 @@ static int ata_dma_blacklisted(const struct ata_device *dev) unsigned char model_num[41]; int i; - ata_dev_id_c_string(dev->id, model_num, ATA_ID_PROD_OFS, - sizeof(model_num)); + ata_id_c_string(dev->id, model_num, ATA_ID_PROD_OFS, sizeof(model_num)); for (i = 0; i < ARRAY_SIZE(ata_dma_blacklist); i++) if (!strcmp(ata_dma_blacklist[i], model_num)) @@ -4934,8 +4933,8 @@ EXPORT_SYMBOL_GPL(ata_scsi_slave_config); EXPORT_SYMBOL_GPL(ata_scsi_release); EXPORT_SYMBOL_GPL(ata_host_intr); EXPORT_SYMBOL_GPL(ata_dev_classify); -EXPORT_SYMBOL_GPL(ata_dev_id_string); -EXPORT_SYMBOL_GPL(ata_dev_id_c_string); +EXPORT_SYMBOL_GPL(ata_id_string); +EXPORT_SYMBOL_GPL(ata_id_c_string); EXPORT_SYMBOL_GPL(ata_dev_config); EXPORT_SYMBOL_GPL(ata_scsi_simulate); EXPORT_SYMBOL_GPL(ata_eh_qc_complete); diff --git a/drivers/scsi/libata-scsi.c b/drivers/scsi/libata-scsi.c index 86da46502b3e..538784e65cdc 100644 --- a/drivers/scsi/libata-scsi.c +++ b/drivers/scsi/libata-scsi.c @@ -1567,8 +1567,8 @@ unsigned int ata_scsiop_inq_std(struct ata_scsi_args *args, u8 *rbuf, if (buflen > 35) { memcpy(&rbuf[8], "ATA ", 8); - ata_dev_id_string(args->id, &rbuf[16], ATA_ID_PROD_OFS, 16); - ata_dev_id_string(args->id, &rbuf[32], ATA_ID_FW_REV_OFS, 4); + ata_id_string(args->id, &rbuf[16], ATA_ID_PROD_OFS, 16); + ata_id_string(args->id, &rbuf[32], ATA_ID_FW_REV_OFS, 4); if (rbuf[32] == 0 || rbuf[32] == ' ') memcpy(&rbuf[32], "n/a ", 4); } @@ -1642,8 +1642,8 @@ unsigned int ata_scsiop_inq_80(struct ata_scsi_args *args, u8 *rbuf, memcpy(rbuf, hdr, sizeof(hdr)); if (buflen > (ATA_SERNO_LEN + 4 - 1)) - ata_dev_id_string(args->id, (unsigned char *) &rbuf[4], - ATA_ID_SERNO_OFS, ATA_SERNO_LEN); + ata_id_string(args->id, (unsigned char *) &rbuf[4], + ATA_ID_SERNO_OFS, ATA_SERNO_LEN); return 0; } @@ -1806,8 +1806,8 @@ static int ata_dev_supports_fua(u16 *id) if (!ata_id_has_fua(id)) return 0; - ata_dev_id_c_string(id, model, ATA_ID_PROD_OFS, sizeof(model)); - ata_dev_id_c_string(id, fw, ATA_ID_FW_REV_OFS, sizeof(fw)); + ata_id_c_string(id, model, ATA_ID_PROD_OFS, sizeof(model)); + ata_id_c_string(id, fw, ATA_ID_FW_REV_OFS, sizeof(fw)); if (strcmp(model, "Maxtor")) return 1; diff --git a/drivers/scsi/sata_sil.c b/drivers/scsi/sata_sil.c index 15346888faf2..e14ed4ebbeed 100644 --- a/drivers/scsi/sata_sil.c +++ b/drivers/scsi/sata_sil.c @@ -338,8 +338,7 @@ static void sil_dev_config(struct ata_port *ap, struct ata_device *dev) unsigned int n, quirks = 0; unsigned char model_num[41]; - ata_dev_id_c_string(dev->id, model_num, ATA_ID_PROD_OFS, - sizeof(model_num)); + ata_id_c_string(dev->id, model_num, ATA_ID_PROD_OFS, sizeof(model_num)); for (n = 0; sil_blacklist[n].product; n++) if (!strcmp(sil_blacklist[n].product, model_num)) { -- cgit v1.2.1 From 6aff8f1f07a7fff48121d1ad4a550f3af24ccc81 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Wed, 15 Feb 2006 18:24:09 +0900 Subject: [PATCH] libata: update ata_dev_init_params() Update ata_dev_init_params() such that it doesn't disable port directly but return with appropriate error mask on failure. This is preparation for splitting ata_dev_identify(). Note that this patch changes behavior of dev_init_params failure such that only failing devices are taken offline not the whole port. This change is intended. Signed-off-by: Tejun Heo Signed-off-by: Jeff Garzik --- drivers/scsi/libata-core.c | 29 +++++++++++++++++++---------- 1 file changed, 19 insertions(+), 10 deletions(-) (limited to 'drivers/scsi') diff --git a/drivers/scsi/libata-core.c b/drivers/scsi/libata-core.c index d694b20e81bf..76621463b499 100644 --- a/drivers/scsi/libata-core.c +++ b/drivers/scsi/libata-core.c @@ -62,7 +62,8 @@ #include "libata.h" static void ata_dev_reread_id(struct ata_port *ap, struct ata_device *dev); -static void ata_dev_init_params(struct ata_port *ap, struct ata_device *dev); +static unsigned int ata_dev_init_params(struct ata_port *ap, + struct ata_device *dev); static void ata_set_mode(struct ata_port *ap); static void ata_dev_set_xfermode(struct ata_port *ap, struct ata_device *dev); static unsigned int ata_get_mode_mask(const struct ata_port *ap, int shift); @@ -1041,7 +1042,12 @@ retry: * Some drives were very specific about that exact sequence. */ if (major_version < 4 || (!ata_id_has_lba(dev->id))) { - ata_dev_init_params(ap, dev); + err_mask = ata_dev_init_params(ap, dev); + if (err_mask) { + printk(KERN_ERR "ata%u: failed to init " + "parameters, disabled\n", ap->id); + goto err_out; + } /* current CHS translation info (id[53-58]) might be * changed. reread the identify device info. @@ -2530,17 +2536,23 @@ err_out: * @dev: Device to which command will be sent * * LOCKING: + * Kernel thread context (may sleep) + * + * RETURNS: + * 0 on success, AC_ERR_* mask otherwise. */ -static void ata_dev_init_params(struct ata_port *ap, struct ata_device *dev) +static unsigned int ata_dev_init_params(struct ata_port *ap, + struct ata_device *dev) { struct ata_taskfile tf; + unsigned int err_mask; u16 sectors = dev->id[6]; u16 heads = dev->id[3]; /* Number of sectors per track 1-255. Number of heads 1-16 */ if (sectors < 1 || sectors > 255 || heads < 1 || heads > 16) - return; + return 0; /* set up init dev params taskfile */ DPRINTK("init dev params \n"); @@ -2552,13 +2564,10 @@ static void ata_dev_init_params(struct ata_port *ap, struct ata_device *dev) tf.nsect = sectors; tf.device |= (heads - 1) & 0x0f; /* max head = num. of heads - 1 */ - if (ata_exec_internal(ap, dev, &tf, DMA_NONE, NULL, 0)) { - printk(KERN_ERR "ata%u: failed to init parameters, disabled\n", - ap->id); - ata_port_disable(ap); - } + err_mask = ata_exec_internal(ap, dev, &tf, DMA_NONE, NULL, 0); - DPRINTK("EXIT\n"); + DPRINTK("EXIT, err_mask=%x\n", err_mask); + return err_mask; } /** -- cgit v1.2.1 From 56497bd5f1340cb97d94cab953b050be6f729790 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Wed, 15 Feb 2006 15:01:42 +0900 Subject: [PATCH] libata: fix comment regarding setting cable type The comment above ata_std_postreset() specified that setting cable type is the responsibility of postreset(), which isn't possible / optimal depending on controller / driver. This patch kills the comment. Setting cable type is responsibility of ->probe_reset. libata doesn't care whether it's done in probeinit, reset or postreset. Signed-off-by: Tejun Heo Signed-off-by: Jeff Garzik --- drivers/scsi/libata-core.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) (limited to 'drivers/scsi') diff --git a/drivers/scsi/libata-core.c b/drivers/scsi/libata-core.c index 76621463b499..62340f4ef004 100644 --- a/drivers/scsi/libata-core.c +++ b/drivers/scsi/libata-core.c @@ -2112,7 +2112,6 @@ int sata_std_hardreset(struct ata_port *ap, int verbose, unsigned int *class) * This function is invoked after a successful reset. Note that * the device might have been reset more than once using * different reset methods before postreset is invoked. - * postreset is also reponsible for setting cable type. * * This function is to be used as standard callback for * ata_drive_*_reset(). @@ -2124,7 +2123,7 @@ void ata_std_postreset(struct ata_port *ap, unsigned int *classes) { DPRINTK("ENTER\n"); - /* set cable type */ + /* set cable type if it isn't already set */ if (ap->cbl == ATA_CBL_NONE && ap->flags & ATA_FLAG_SATA) ap->cbl = ATA_CBL_SATA; -- cgit v1.2.1 From 573db6b8f93b5e359abd9a05e620fd9a589b0209 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Wed, 15 Feb 2006 15:01:42 +0900 Subject: [PATCH] ata_piix: convert pata to new reset mechanism Convert ata_piix pata ->phy_reset to new reset mechanism. Signed-off-by: Tejun Heo Signed-off-by: Jeff Garzik --- drivers/scsi/ata_piix.c | 43 +++++++++++++++++++++++++++---------------- 1 file changed, 27 insertions(+), 16 deletions(-) (limited to 'drivers/scsi') diff --git a/drivers/scsi/ata_piix.c b/drivers/scsi/ata_piix.c index 4cc1108f721a..d79c252a3f60 100644 --- a/drivers/scsi/ata_piix.c +++ b/drivers/scsi/ata_piix.c @@ -131,7 +131,7 @@ enum { static int piix_init_one (struct pci_dev *pdev, const struct pci_device_id *ent); -static void piix_pata_phy_reset(struct ata_port *ap); +static int piix_pata_probe_reset(struct ata_port *ap, unsigned int *classes); static void piix_sata_phy_reset(struct ata_port *ap); static void piix_set_piomode (struct ata_port *ap, struct ata_device *adev); static void piix_set_dmamode (struct ata_port *ap, struct ata_device *adev); @@ -207,7 +207,7 @@ static const struct ata_port_operations piix_pata_ops = { .exec_command = ata_exec_command, .dev_select = ata_std_dev_select, - .phy_reset = piix_pata_phy_reset, + .probe_reset = piix_pata_probe_reset, .bmdma_setup = ata_bmdma_setup, .bmdma_start = ata_bmdma_start, @@ -258,8 +258,7 @@ static struct ata_port_info piix_port_info[] = { /* ich5_pata */ { .sht = &piix_sht, - .host_flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST | - PIIX_FLAG_CHECKINTR, + .host_flags = ATA_FLAG_SLAVE_POSS | PIIX_FLAG_CHECKINTR, .pio_mask = 0x1f, /* pio0-4 */ #if 0 .mwdma_mask = 0x06, /* mwdma1-2 */ @@ -284,7 +283,7 @@ static struct ata_port_info piix_port_info[] = { /* piix4_pata */ { .sht = &piix_sht, - .host_flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST, + .host_flags = ATA_FLAG_SLAVE_POSS, .pio_mask = 0x1f, /* pio0-4 */ #if 0 .mwdma_mask = 0x06, /* mwdma1-2 */ @@ -366,30 +365,42 @@ cbl40: } /** - * piix_pata_phy_reset - Probe specified port on PATA host controller - * @ap: Port to probe + * piix_pata_probeinit - probeinit for PATA host controller + * @ap: Target port * - * Probe PATA phy. + * Probeinit including cable detection. * * LOCKING: * None (inherited from caller). */ +static void piix_pata_probeinit(struct ata_port *ap) +{ + piix_pata_cbl_detect(ap); + ata_std_probeinit(ap); +} -static void piix_pata_phy_reset(struct ata_port *ap) +/** + * piix_pata_probe_reset - Perform reset on PATA port and classify + * @ap: Port to reset + * @classes: Resulting classes of attached devices + * + * Reset PATA phy and classify attached devices. + * + * LOCKING: + * None (inherited from caller). + */ +static int piix_pata_probe_reset(struct ata_port *ap, unsigned int *classes) { struct pci_dev *pdev = to_pci_dev(ap->host_set->dev); if (!pci_test_config_bits(pdev, &piix_enable_bits[ap->hard_port_no])) { - ata_port_disable(ap); printk(KERN_INFO "ata%u: port disabled. ignoring.\n", ap->id); - return; + return 0; } - piix_pata_cbl_detect(ap); - - ata_port_probe(ap); - - ata_bus_reset(ap); + return ata_drive_probe_reset(ap, piix_pata_probeinit, + ata_std_softreset, NULL, + ata_std_postreset, classes); } /** -- cgit v1.2.1 From ccbe6d5ee0eb3182675ef1c84322810fd884586d Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Wed, 15 Feb 2006 15:01:42 +0900 Subject: [PATCH] ata_piix: convert sata to new reset mechanism Convert ata_piix sata ->phy_reset to new reset mechanism. Signed-off-by: Tejun Heo Signed-off-by: Jeff Garzik --- drivers/scsi/ata_piix.c | 35 +++++++++++++++-------------------- 1 file changed, 15 insertions(+), 20 deletions(-) (limited to 'drivers/scsi') diff --git a/drivers/scsi/ata_piix.c b/drivers/scsi/ata_piix.c index d79c252a3f60..c662bf531514 100644 --- a/drivers/scsi/ata_piix.c +++ b/drivers/scsi/ata_piix.c @@ -132,7 +132,7 @@ static int piix_init_one (struct pci_dev *pdev, const struct pci_device_id *ent); static int piix_pata_probe_reset(struct ata_port *ap, unsigned int *classes); -static void piix_sata_phy_reset(struct ata_port *ap); +static int piix_sata_probe_reset(struct ata_port *ap, unsigned int *classes); static void piix_set_piomode (struct ata_port *ap, struct ata_device *adev); static void piix_set_dmamode (struct ata_port *ap, struct ata_device *adev); @@ -235,7 +235,7 @@ static const struct ata_port_operations piix_sata_ops = { .exec_command = ata_exec_command, .dev_select = ata_std_dev_select, - .phy_reset = piix_sata_phy_reset, + .probe_reset = piix_sata_probe_reset, .bmdma_setup = ata_bmdma_setup, .bmdma_start = ata_bmdma_start, @@ -272,8 +272,8 @@ static struct ata_port_info piix_port_info[] = { /* ich5_sata */ { .sht = &piix_sht, - .host_flags = ATA_FLAG_SATA | ATA_FLAG_SRST | - PIIX_FLAG_COMBINED | PIIX_FLAG_CHECKINTR, + .host_flags = ATA_FLAG_SATA | PIIX_FLAG_COMBINED | + PIIX_FLAG_CHECKINTR, .pio_mask = 0x1f, /* pio0-4 */ .mwdma_mask = 0x07, /* mwdma0-2 */ .udma_mask = 0x7f, /* udma0-6 */ @@ -297,8 +297,7 @@ static struct ata_port_info piix_port_info[] = { /* ich6_sata */ { .sht = &piix_sht, - .host_flags = ATA_FLAG_SATA | ATA_FLAG_SRST | - PIIX_FLAG_COMBINED_ICH6 | + .host_flags = ATA_FLAG_SATA | PIIX_FLAG_COMBINED_ICH6 | PIIX_FLAG_CHECKINTR | ATA_FLAG_SLAVE_POSS, .pio_mask = 0x1f, /* pio0-4 */ .mwdma_mask = 0x07, /* mwdma0-2 */ @@ -309,8 +308,7 @@ static struct ata_port_info piix_port_info[] = { /* ich6_sata_ahci */ { .sht = &piix_sht, - .host_flags = ATA_FLAG_SATA | ATA_FLAG_SRST | - PIIX_FLAG_COMBINED_ICH6 | + .host_flags = ATA_FLAG_SATA | PIIX_FLAG_COMBINED_ICH6 | PIIX_FLAG_CHECKINTR | ATA_FLAG_SLAVE_POSS | PIIX_FLAG_AHCI, .pio_mask = 0x1f, /* pio0-4 */ @@ -448,28 +446,25 @@ static int piix_sata_probe (struct ata_port *ap) } /** - * piix_sata_phy_reset - Probe specified port on SATA host controller - * @ap: Port to probe + * piix_sata_probe_reset - Perform reset on SATA port and classify + * @ap: Port to reset + * @classes: Resulting classes of attached devices * - * Probe SATA phy. + * Reset SATA phy and classify attached devices. * * LOCKING: * None (inherited from caller). */ - -static void piix_sata_phy_reset(struct ata_port *ap) +static int piix_sata_probe_reset(struct ata_port *ap, unsigned int *classes) { if (!piix_sata_probe(ap)) { - ata_port_disable(ap); printk(KERN_INFO "ata%u: SATA port has no device.\n", ap->id); - return; + return 0; } - ap->cbl = ATA_CBL_SATA; - - ata_port_probe(ap); - - ata_bus_reset(ap); + return ata_drive_probe_reset(ap, ata_std_probeinit, + ata_std_softreset, NULL, + ata_std_postreset, classes); } /** -- cgit v1.2.1 From 49016aca2e54c64f08c31d5512dfd8d35f934c58 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Tue, 21 Feb 2006 02:12:11 +0900 Subject: [PATCH] libata: separate out ata_dev_read_id() Separate out ata_dev_read_id() from ata_dev_identify(). This is the first half of splitting ata_dev_identify(). ata_dev_read_id() will also be used for revalidation. This patch does not make any behavior change. ata_dev_read_id() doesn't modify any of libata-internal data structures. It simply reads IDENTIFY page and returns error code on failure. INIT_DEV_PARAMS and EDD wrong class code are also handled by this function. Re-reading IDENTIFY after INIT_DEV_PARAMS is performed by jumping to retry: instead of calling ata_dev_reread_id(). This is done because 1. there's retry label anyway 2. ata_dev_reread_id() cannot be used anywhere else so there's no reason to keep it. This function is probably the place to set transfer mode to PIO0 before IDENTIFY. However, reset -> identify -> init_dev_params order should be kept for pre-ATA4 devices so we cannot set transfer mode before IDENTIFY for them. How do we know if a device is post-ATA4 before IDENTIFY? Signed-off-by: Tejun Heo Signed-off-by: Jeff Garzik --- drivers/scsi/libata-core.c | 210 +++++++++++++++++++++++++++------------------ 1 file changed, 128 insertions(+), 82 deletions(-) (limited to 'drivers/scsi') diff --git a/drivers/scsi/libata-core.c b/drivers/scsi/libata-core.c index 70efde99f652..d0a26e9553a1 100644 --- a/drivers/scsi/libata-core.c +++ b/drivers/scsi/libata-core.c @@ -903,42 +903,36 @@ unsigned int ata_pio_need_iordy(const struct ata_device *adev) } /** - * ata_dev_identify - obtain IDENTIFY x DEVICE page - * @ap: port on which device we wish to probe resides - * @device: device bus address, starting at zero - * - * Following bus reset, we issue the IDENTIFY [PACKET] DEVICE - * command, and read back the 512-byte device information page. - * The device information page is fed to us via the standard - * PIO-IN protocol, but we hand-code it here. (TODO: investigate - * using standard PIO-IN paths) - * - * After reading the device information page, we use several - * bits of information from it to initialize data structures - * that will be used during the lifetime of the ata_device. - * Other data from the info page is used to disqualify certain - * older ATA devices we do not wish to support. + * ata_dev_read_id - Read ID data from the specified device + * @ap: port on which target device resides + * @dev: target device + * @p_class: pointer to class of the target device (may be changed) + * @post_reset: is this read ID post-reset? + * @id: buffer to fill IDENTIFY page into + * + * Read ID data from the specified device. ATA_CMD_ID_ATA is + * performed on ATA devices and ATA_CMD_ID_ATAPI on ATAPI + * devices. This function also takes care of EDD signature + * misreporting (to be removed once EDD support is gone) and + * issues ATA_CMD_INIT_DEV_PARAMS for pre-ATA4 drives. * * LOCKING: - * Inherited from caller. Some functions called by this function - * obtain the host_set lock. + * Kernel thread context (may sleep) + * + * RETURNS: + * 0 on success, -errno otherwise. */ - -static void ata_dev_identify(struct ata_port *ap, unsigned int device) +static int ata_dev_read_id(struct ata_port *ap, struct ata_device *dev, + unsigned int *p_class, int post_reset, u16 *id) { - struct ata_device *dev = &ap->device[device]; - unsigned int major_version; - unsigned long xfer_modes; + unsigned int class = *p_class; unsigned int using_edd; struct ata_taskfile tf; - unsigned int err_mask; - int i, rc; + unsigned int err_mask = 0; + const char *reason; + int rc; - if (!ata_dev_present(dev)) { - DPRINTK("ENTER/EXIT (host %u, dev %u) -- nodev\n", - ap->id, device); - return; - } + DPRINTK("ENTER, host %u, dev %u\n", ap->id, dev->devno); if (ap->ops->probe_reset || ap->flags & (ATA_FLAG_SRST | ATA_FLAG_SATA_RESET)) @@ -946,30 +940,33 @@ static void ata_dev_identify(struct ata_port *ap, unsigned int device) else using_edd = 1; - DPRINTK("ENTER, host %u, dev %u\n", ap->id, device); - - WARN_ON(dev->class != ATA_DEV_ATA && dev->class != ATA_DEV_ATAPI && - dev->class != ATA_DEV_NONE); - - ata_dev_select(ap, device, 1, 1); /* select device 0/1 */ + ata_dev_select(ap, dev->devno, 1, 1); /* select device 0/1 */ -retry: - ata_tf_init(ap, &tf, device); + retry: + ata_tf_init(ap, &tf, dev->devno); - if (dev->class == ATA_DEV_ATA) { + switch (class) { + case ATA_DEV_ATA: tf.command = ATA_CMD_ID_ATA; - DPRINTK("do ATA identify\n"); - } else { + break; + case ATA_DEV_ATAPI: tf.command = ATA_CMD_ID_ATAPI; - DPRINTK("do ATAPI identify\n"); + break; + default: + rc = -ENODEV; + reason = "unsupported class"; + goto err_out; } tf.protocol = ATA_PROT_PIO; err_mask = ata_exec_internal(ap, dev, &tf, DMA_FROM_DEVICE, - dev->id, sizeof(dev->id)); + id, sizeof(id[0]) * ATA_ID_WORDS); if (err_mask) { + rc = -EIO; + reason = "I/O error"; + if (err_mask & ~AC_ERR_DEV) goto err_out; @@ -984,25 +981,105 @@ retry: * ATA software reset (SRST, the default) does not appear * to have this problem. */ - if ((using_edd) && (dev->class == ATA_DEV_ATA)) { + if ((using_edd) && (class == ATA_DEV_ATA)) { u8 err = tf.feature; if (err & ATA_ABORTED) { - dev->class = ATA_DEV_ATAPI; + class = ATA_DEV_ATAPI; goto retry; } } goto err_out; } - swap_buf_le16(dev->id, ATA_ID_WORDS); + swap_buf_le16(id, ATA_ID_WORDS); /* print device capabilities */ printk(KERN_DEBUG "ata%u: dev %u cfg " "49:%04x 82:%04x 83:%04x 84:%04x 85:%04x 86:%04x 87:%04x 88:%04x\n", - ap->id, device, dev->id[49], - dev->id[82], dev->id[83], dev->id[84], - dev->id[85], dev->id[86], dev->id[87], - dev->id[88]); + ap->id, dev->devno, + id[49], id[82], id[83], id[84], id[85], id[86], id[87], id[88]); + + /* sanity check */ + if ((class == ATA_DEV_ATA) != ata_id_is_ata(id)) { + rc = -EINVAL; + reason = "device reports illegal type"; + goto err_out; + } + + if (post_reset && class == ATA_DEV_ATA) { + /* + * The exact sequence expected by certain pre-ATA4 drives is: + * SRST RESET + * IDENTIFY + * INITIALIZE DEVICE PARAMETERS + * anything else.. + * Some drives were very specific about that exact sequence. + */ + if (ata_id_major_version(id) < 4 || !ata_id_has_lba(id)) { + err_mask = ata_dev_init_params(ap, dev); + if (err_mask) { + rc = -EIO; + reason = "INIT_DEV_PARAMS failed"; + goto err_out; + } + + /* current CHS translation info (id[53-58]) might be + * changed. reread the identify device info. + */ + post_reset = 0; + goto retry; + } + } + + *p_class = class; + return 0; + + err_out: + printk(KERN_WARNING "ata%u: dev %u failed to IDENTIFY (%s)\n", + ap->id, dev->devno, reason); + kfree(id); + return rc; +} + +/** + * ata_dev_identify - obtain IDENTIFY x DEVICE page + * @ap: port on which device we wish to probe resides + * @device: device bus address, starting at zero + * + * Following bus reset, we issue the IDENTIFY [PACKET] DEVICE + * command, and read back the 512-byte device information page. + * The device information page is fed to us via the standard + * PIO-IN protocol, but we hand-code it here. (TODO: investigate + * using standard PIO-IN paths) + * + * After reading the device information page, we use several + * bits of information from it to initialize data structures + * that will be used during the lifetime of the ata_device. + * Other data from the info page is used to disqualify certain + * older ATA devices we do not wish to support. + * + * LOCKING: + * Inherited from caller. Some functions called by this function + * obtain the host_set lock. + */ + +static void ata_dev_identify(struct ata_port *ap, unsigned int device) +{ + struct ata_device *dev = &ap->device[device]; + unsigned long xfer_modes; + int i, rc; + + if (!ata_dev_present(dev)) { + DPRINTK("ENTER/EXIT (host %u, dev %u) -- nodev\n", + ap->id, device); + return; + } + + DPRINTK("ENTER, host %u, dev %u\n", ap->id, device); + + rc = ata_dev_read_id(ap, dev, &dev->class, 1, dev->id); + if (rc) + goto err_out; /* * common ATA, ATAPI feature tests @@ -1027,34 +1104,6 @@ retry: if (dev->class == ATA_DEV_ATA) { dev->n_sectors = ata_id_n_sectors(dev->id); - if (!ata_id_is_ata(dev->id)) /* sanity check */ - goto err_out_nosup; - - /* get major version */ - major_version = ata_id_major_version(dev->id); - - /* - * The exact sequence expected by certain pre-ATA4 drives is: - * SRST RESET - * IDENTIFY - * INITIALIZE DEVICE PARAMETERS - * anything else.. - * Some drives were very specific about that exact sequence. - */ - if (major_version < 4 || (!ata_id_has_lba(dev->id))) { - err_mask = ata_dev_init_params(ap, dev); - if (err_mask) { - printk(KERN_ERR "ata%u: failed to init " - "parameters, disabled\n", ap->id); - goto err_out; - } - - /* current CHS translation info (id[53-58]) might be - * changed. reread the identify device info. - */ - ata_dev_reread_id(ap, dev); - } - if (ata_id_has_lba(dev->id)) { dev->flags |= ATA_DFLAG_LBA; @@ -1064,7 +1113,7 @@ retry: /* print device info to dmesg */ printk(KERN_INFO "ata%u: dev %u ATA-%d, max %s, %Lu sectors:%s\n", ap->id, device, - major_version, + ata_id_major_version(dev->id), ata_mode_string(xfer_modes), (unsigned long long)dev->n_sectors, dev->flags & ATA_DFLAG_LBA48 ? " LBA48" : " LBA"); @@ -1086,7 +1135,7 @@ retry: /* print device info to dmesg */ printk(KERN_INFO "ata%u: dev %u ATA-%d, max %s, %Lu sectors: CHS %d/%d/%d\n", ap->id, device, - major_version, + ata_id_major_version(dev->id), ata_mode_string(xfer_modes), (unsigned long long)dev->n_sectors, (int)dev->cylinders, (int)dev->heads, (int)dev->sectors); @@ -1098,9 +1147,6 @@ retry: /* ATAPI-specific feature tests */ else if (dev->class == ATA_DEV_ATAPI) { - if (ata_id_is_ata(dev->id)) /* sanity check */ - goto err_out_nosup; - rc = atapi_cdb_len(dev->id); if ((rc < 12) || (rc > ATAPI_CDB_LEN)) { printk(KERN_WARNING "ata%u: unsupported CDB len\n", ap->id); -- cgit v1.2.1 From ba70d0614728892b86b2be2f7eae0c696b436461 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Tue, 21 Feb 2006 02:12:11 +0900 Subject: [PATCH] libata: kill ata_dev_reread_id() Kill now-unused ata_dev_reread_id(). Signed-off-by: Tejun Heo Signed-off-by: Jeff Garzik --- drivers/scsi/libata-core.c | 42 ------------------------------------------ 1 file changed, 42 deletions(-) (limited to 'drivers/scsi') diff --git a/drivers/scsi/libata-core.c b/drivers/scsi/libata-core.c index d0a26e9553a1..ab3257a6b860 100644 --- a/drivers/scsi/libata-core.c +++ b/drivers/scsi/libata-core.c @@ -61,7 +61,6 @@ #include "libata.h" -static void ata_dev_reread_id(struct ata_port *ap, struct ata_device *dev); static unsigned int ata_dev_init_params(struct ata_port *ap, struct ata_device *dev); static void ata_set_mode(struct ata_port *ap); @@ -2534,47 +2533,6 @@ static void ata_dev_set_xfermode(struct ata_port *ap, struct ata_device *dev) DPRINTK("EXIT\n"); } -/** - * ata_dev_reread_id - Reread the device identify device info - * @ap: port where the device is - * @dev: device to reread the identify device info - * - * LOCKING: - */ - -static void ata_dev_reread_id(struct ata_port *ap, struct ata_device *dev) -{ - struct ata_taskfile tf; - - ata_tf_init(ap, &tf, dev->devno); - - if (dev->class == ATA_DEV_ATA) { - tf.command = ATA_CMD_ID_ATA; - DPRINTK("do ATA identify\n"); - } else { - tf.command = ATA_CMD_ID_ATAPI; - DPRINTK("do ATAPI identify\n"); - } - - tf.flags |= ATA_TFLAG_DEVICE; - tf.protocol = ATA_PROT_PIO; - - if (ata_exec_internal(ap, dev, &tf, DMA_FROM_DEVICE, - dev->id, sizeof(dev->id))) - goto err_out; - - swap_buf_le16(dev->id, ATA_ID_WORDS); - - ata_dump_id(dev->id); - - DPRINTK("EXIT\n"); - - return; -err_out: - printk(KERN_ERR "ata%u: failed to reread ID, disabled\n", ap->id); - ata_port_disable(ap); -} - /** * ata_dev_init_params - Issue INIT DEV PARAMS command * @ap: Port associated with device @dev -- cgit v1.2.1 From 4b9d7e04a8daaf3e5afe775ec9cbbfda5e32dd5b Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Thu, 23 Feb 2006 10:46:47 +0900 Subject: [PATCH] sata_sil24: add a new PCI ID for SiI 3124 Add a new PCI ID for SiI 3124. Reported by Silicon Image. Signed-off-by: Tejun Heo Cc: Carlos Pardo Signed-off-by: Jeff Garzik --- drivers/scsi/sata_sil24.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers/scsi') diff --git a/drivers/scsi/sata_sil24.c b/drivers/scsi/sata_sil24.c index a0e35a262156..5c5822e33a49 100644 --- a/drivers/scsi/sata_sil24.c +++ b/drivers/scsi/sata_sil24.c @@ -262,6 +262,7 @@ static int sil24_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) static const struct pci_device_id sil24_pci_tbl[] = { { 0x1095, 0x3124, PCI_ANY_ID, PCI_ANY_ID, 0, 0, BID_SIL3124 }, + { 0x8086, 0x3124, PCI_ANY_ID, PCI_ANY_ID, 0, 0, BID_SIL3124 }, { 0x1095, 0x3132, PCI_ANY_ID, PCI_ANY_ID, 0, 0, BID_SIL3132 }, { 0x1095, 0x3131, PCI_ANY_ID, PCI_ANY_ID, 0, 0, BID_SIL3131 }, { 0x1095, 0x3531, PCI_ANY_ID, PCI_ANY_ID, 0, 0, BID_SIL3131 }, -- cgit v1.2.1 From a9d01d2b49f528ffcf3093a77c66f254d297d5c8 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Tue, 28 Feb 2006 17:38:10 +0900 Subject: [PATCH] libata: kill illegal kfree(id) Kill kfree(id) in failure path of ata_dev_read_id(). id is not dynamically allocated yet. Signed-off-by: Tejun Heo Cc: Randy Dunlap Signed-off-by: Jeff Garzik --- drivers/scsi/libata-core.c | 1 - 1 file changed, 1 deletion(-) (limited to 'drivers/scsi') diff --git a/drivers/scsi/libata-core.c b/drivers/scsi/libata-core.c index 17c1df435cc8..e34b421eb2a3 100644 --- a/drivers/scsi/libata-core.c +++ b/drivers/scsi/libata-core.c @@ -1040,7 +1040,6 @@ static int ata_dev_read_id(struct ata_port *ap, struct ata_device *dev, err_out: printk(KERN_WARNING "ata%u: dev %u failed to IDENTIFY (%s)\n", ap->id, dev->devno, reason); - kfree(id); return rc; } -- cgit v1.2.1 From 348edc59a8f9b9a66700781d972c24a46a79ae86 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Wed, 1 Mar 2006 19:07:27 +0900 Subject: [PATCH] sata_sil: remove unneeded ATA_FLAG_SRST from 3512 port info Now unneeded ATA_FLAG_SRST sneaked into sil_3512 port info while merging upstream-fixes. Kill it. Signed-off-by: Tejun Heo Signed-off-by: Jeff Garzik --- drivers/scsi/sata_sil.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/scsi') diff --git a/drivers/scsi/sata_sil.c b/drivers/scsi/sata_sil.c index 91ecf527bb8a..cdf800e3ec13 100644 --- a/drivers/scsi/sata_sil.c +++ b/drivers/scsi/sata_sil.c @@ -202,7 +202,7 @@ static const struct ata_port_info sil_port_info[] = { { .sht = &sil_sht, .host_flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY | - ATA_FLAG_SRST | ATA_FLAG_MMIO | + ATA_FLAG_MMIO | SIL_FLAG_RERR_ON_DMA_ACT, .pio_mask = 0x1f, /* pio0-4 */ .mwdma_mask = 0x07, /* mwdma0-2 */ -- cgit v1.2.1 From 98acfc7e8e2606fadae6d2bf99fa040be917ce8c Mon Sep 17 00:00:00 2001 From: Matthew Wilcox Date: Wed, 1 Mar 2006 12:04:46 -0700 Subject: [SCSI] Add Brownie to blacklist This device spews total rubbish to a REPORT LUNS command, so avoid sending it one. Signed-off-by: Matthew Wilcox Signed-off-by: James Bottomley --- drivers/scsi/scsi_devinfo.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers/scsi') diff --git a/drivers/scsi/scsi_devinfo.c b/drivers/scsi/scsi_devinfo.c index f01ec0a7c506..84c3937ae8fb 100644 --- a/drivers/scsi/scsi_devinfo.c +++ b/drivers/scsi/scsi_devinfo.c @@ -126,6 +126,7 @@ static struct { {"ADAPTEC", "Adaptec 5400S", NULL, BLIST_FORCELUN}, {"AFT PRO", "-IX CF", "0.0>", BLIST_FORCELUN}, {"BELKIN", "USB 2 HS-CF", "1.95", BLIST_FORCELUN | BLIST_INQUIRY_36}, + {"BROWNIE", "1600U3P", NULL, BLIST_NOREPORTLUN}, {"CANON", "IPUBJD", NULL, BLIST_SPARSELUN}, {"CBOX3", "USB Storage-SMC", "300A", BLIST_FORCELUN | BLIST_INQUIRY_36}, {"CMD", "CRA-7280", NULL, BLIST_SPARSELUN}, /* CMD RAID Controller */ -- cgit v1.2.1 From 1d076e5b8d91babc018ffaefafd4f85a53c9a1b1 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Wed, 1 Mar 2006 01:25:39 +0900 Subject: [PATCH] ata_piix: finer-grained port_info Make port_info finer-grained. This patch doesn't cause any functional change. Later init reimplementation will make use of it. Signed-off-by: Tejun Heo Signed-off-by: Jeff Garzik --- drivers/scsi/ata_piix.c | 77 +++++++++++++++++++++++++++++++++++++------------ 1 file changed, 58 insertions(+), 19 deletions(-) (limited to 'drivers/scsi') diff --git a/drivers/scsi/ata_piix.c b/drivers/scsi/ata_piix.c index c662bf531514..5988d5fe1e18 100644 --- a/drivers/scsi/ata_piix.c +++ b/drivers/scsi/ata_piix.c @@ -119,11 +119,14 @@ enum { PIIX_80C_PRI = (1 << 5) | (1 << 4), PIIX_80C_SEC = (1 << 7) | (1 << 6), - ich5_pata = 0, - ich5_sata = 1, - piix4_pata = 2, - ich6_sata = 3, - ich6_sata_ahci = 4, + /* controller IDs */ + piix4_pata = 0, + ich5_pata = 1, + ich5_sata = 2, + esb_sata = 3, + ich6_sata = 4, + ich6_sata_ahci = 5, + ich6m_sata_ahci = 6, PIIX_AHCI_DEVICE = 6, }; @@ -149,19 +152,32 @@ static const struct pci_device_id piix_pci_tbl[] = { * list in drivers/pci/quirks.c. */ + /* 82801EB (ICH5) */ { 0x8086, 0x24d1, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich5_sata }, + /* 82801EB (ICH5) */ { 0x8086, 0x24df, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich5_sata }, - { 0x8086, 0x25a3, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich5_sata }, - { 0x8086, 0x25b0, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich5_sata }, + /* 6300ESB (ICH5 variant with broken PCS present bits) */ + { 0x8086, 0x25a3, PCI_ANY_ID, PCI_ANY_ID, 0, 0, esb_sata }, + /* 6300ESB pretending RAID */ + { 0x8086, 0x25b0, PCI_ANY_ID, PCI_ANY_ID, 0, 0, esb_sata }, + /* 82801FB/FW (ICH6/ICH6W) */ { 0x8086, 0x2651, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich6_sata }, + /* 82801FR/FRW (ICH6R/ICH6RW) */ { 0x8086, 0x2652, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich6_sata_ahci }, - { 0x8086, 0x2653, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich6_sata_ahci }, + /* 82801FBM ICH6M (ICH6R with only port 0 and 2 implemented) */ + { 0x8086, 0x2653, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich6m_sata_ahci }, + /* 82801GB/GR/GH (ICH7, identical to ICH6) */ { 0x8086, 0x27c0, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich6_sata_ahci }, - { 0x8086, 0x27c4, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich6_sata_ahci }, + /* 2801GBM/GHM (ICH7M, identical to ICH6M) */ + { 0x8086, 0x27c4, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich6m_sata_ahci }, + /* Enterprise Southbridge 2 (where's the datasheet?) */ { 0x8086, 0x2680, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich6_sata_ahci }, + /* SATA Controller 1 IDE (ICH8, no datasheet yet) */ { 0x8086, 0x2820, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich6_sata_ahci }, + /* SATA Controller 2 IDE (ICH8, ditto) */ { 0x8086, 0x2825, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich6_sata_ahci }, - { 0x8086, 0x2828, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich6_sata_ahci }, + /* Mobile SATA Controller IDE (ICH8M, ditto) */ + { 0x8086, 0x2828, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich6m_sata_ahci }, { } /* terminate list */ }; @@ -255,6 +271,20 @@ static const struct ata_port_operations piix_sata_ops = { }; static struct ata_port_info piix_port_info[] = { + /* piix4_pata */ + { + .sht = &piix_sht, + .host_flags = ATA_FLAG_SLAVE_POSS, + .pio_mask = 0x1f, /* pio0-4 */ +#if 0 + .mwdma_mask = 0x06, /* mwdma1-2 */ +#else + .mwdma_mask = 0x00, /* mwdma broken */ +#endif + .udma_mask = ATA_UDMA_MASK_40C, + .port_ops = &piix_pata_ops, + }, + /* ich5_pata */ { .sht = &piix_sht, @@ -280,18 +310,15 @@ static struct ata_port_info piix_port_info[] = { .port_ops = &piix_sata_ops, }, - /* piix4_pata */ + /* i6300esb_sata */ { .sht = &piix_sht, - .host_flags = ATA_FLAG_SLAVE_POSS, + .host_flags = ATA_FLAG_SATA | PIIX_FLAG_COMBINED | + PIIX_FLAG_CHECKINTR, .pio_mask = 0x1f, /* pio0-4 */ -#if 0 - .mwdma_mask = 0x06, /* mwdma1-2 */ -#else - .mwdma_mask = 0x00, /* mwdma broken */ -#endif - .udma_mask = ATA_UDMA_MASK_40C, - .port_ops = &piix_pata_ops, + .mwdma_mask = 0x07, /* mwdma0-2 */ + .udma_mask = 0x7f, /* udma0-6 */ + .port_ops = &piix_sata_ops, }, /* ich6_sata */ @@ -316,6 +343,18 @@ static struct ata_port_info piix_port_info[] = { .udma_mask = 0x7f, /* udma0-6 */ .port_ops = &piix_sata_ops, }, + + /* ich6m_sata_ahci */ + { + .sht = &piix_sht, + .host_flags = ATA_FLAG_SATA | PIIX_FLAG_COMBINED_ICH6 | + PIIX_FLAG_CHECKINTR | ATA_FLAG_SLAVE_POSS | + PIIX_FLAG_AHCI, + .pio_mask = 0x1f, /* pio0-4 */ + .mwdma_mask = 0x07, /* mwdma0-2 */ + .udma_mask = 0x7f, /* udma0-6 */ + .port_ops = &piix_sata_ops, + }, }; static struct pci_bits piix_enable_bits[] = { -- cgit v1.2.1 From d435804803befedbda9fdc1be088e7930b60982b Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Wed, 1 Mar 2006 01:25:39 +0900 Subject: [PATCH] ata_piix: add a couple of flags Add PIIX_FLAG_IGN_PRESENT and SCR flags. Thi patch doesn't cause any functional change. To be used by later init/scr updates. Signed-off-by: Tejun Heo Signed-off-by: Jeff Garzik --- drivers/scsi/ata_piix.c | 11 +++++++---- 1 file changed, 7 insertions(+), 4 deletions(-) (limited to 'drivers/scsi') diff --git a/drivers/scsi/ata_piix.c b/drivers/scsi/ata_piix.c index 5988d5fe1e18..987a7ccac917 100644 --- a/drivers/scsi/ata_piix.c +++ b/drivers/scsi/ata_piix.c @@ -101,6 +101,8 @@ enum { ICH5_PCS = 0x92, /* port control and status */ PIIX_SCC = 0x0A, /* sub-class code register */ + PIIX_FLAG_IGN_PRESENT = (1 << 25), /* ignore PCS present bits */ + PIIX_FLAG_SCR = (1 << 26), /* SCR available */ PIIX_FLAG_AHCI = (1 << 27), /* AHCI possible */ PIIX_FLAG_CHECKINTR = (1 << 28), /* make sure PCI INTx enabled */ PIIX_FLAG_COMBINED = (1 << 29), /* combined mode possible */ @@ -314,7 +316,7 @@ static struct ata_port_info piix_port_info[] = { { .sht = &piix_sht, .host_flags = ATA_FLAG_SATA | PIIX_FLAG_COMBINED | - PIIX_FLAG_CHECKINTR, + PIIX_FLAG_CHECKINTR | PIIX_FLAG_IGN_PRESENT, .pio_mask = 0x1f, /* pio0-4 */ .mwdma_mask = 0x07, /* mwdma0-2 */ .udma_mask = 0x7f, /* udma0-6 */ @@ -325,7 +327,8 @@ static struct ata_port_info piix_port_info[] = { { .sht = &piix_sht, .host_flags = ATA_FLAG_SATA | PIIX_FLAG_COMBINED_ICH6 | - PIIX_FLAG_CHECKINTR | ATA_FLAG_SLAVE_POSS, + PIIX_FLAG_CHECKINTR | ATA_FLAG_SLAVE_POSS | + PIIX_FLAG_SCR, .pio_mask = 0x1f, /* pio0-4 */ .mwdma_mask = 0x07, /* mwdma0-2 */ .udma_mask = 0x7f, /* udma0-6 */ @@ -337,7 +340,7 @@ static struct ata_port_info piix_port_info[] = { .sht = &piix_sht, .host_flags = ATA_FLAG_SATA | PIIX_FLAG_COMBINED_ICH6 | PIIX_FLAG_CHECKINTR | ATA_FLAG_SLAVE_POSS | - PIIX_FLAG_AHCI, + PIIX_FLAG_SCR | PIIX_FLAG_AHCI, .pio_mask = 0x1f, /* pio0-4 */ .mwdma_mask = 0x07, /* mwdma0-2 */ .udma_mask = 0x7f, /* udma0-6 */ @@ -349,7 +352,7 @@ static struct ata_port_info piix_port_info[] = { .sht = &piix_sht, .host_flags = ATA_FLAG_SATA | PIIX_FLAG_COMBINED_ICH6 | PIIX_FLAG_CHECKINTR | ATA_FLAG_SLAVE_POSS | - PIIX_FLAG_AHCI, + PIIX_FLAG_SCR | PIIX_FLAG_AHCI, .pio_mask = 0x1f, /* pio0-4 */ .mwdma_mask = 0x07, /* mwdma0-2 */ .udma_mask = 0x7f, /* udma0-6 */ -- cgit v1.2.1 From d33f58b883a3f624b9362227bf73fc52a6cbd4b4 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Wed, 1 Mar 2006 01:25:39 +0900 Subject: [PATCH] ata_piix: implement proper port map Replace combined mode handling via PIIX_COMB/COMB_PATA_P0 with proper port map. PIIX now prints port configuration during initialization. ATA_FLAG_SLAVE_POSS is now turned on for SATA ports only when the slave device is actually avaliable. Signed-off-by: Tejun Heo Signed-off-by: Jeff Garzik --- drivers/scsi/ata_piix.c | 182 ++++++++++++++++++++++++++++++++---------------- 1 file changed, 122 insertions(+), 60 deletions(-) (limited to 'drivers/scsi') diff --git a/drivers/scsi/ata_piix.c b/drivers/scsi/ata_piix.c index 987a7ccac917..4080b8be847b 100644 --- a/drivers/scsi/ata_piix.c +++ b/drivers/scsi/ata_piix.c @@ -112,9 +112,6 @@ enum { /* combined mode. if set, PATA is channel 0. * if clear, PATA is channel 1. */ - PIIX_COMB_PATA_P0 = (1 << 1), - PIIX_COMB = (1 << 2), /* combined mode enabled? */ - PIIX_PORT_ENABLED = (1 << 0), PIIX_PORT_PRESENT = (1 << 4), @@ -130,9 +127,23 @@ enum { ich6_sata_ahci = 5, ich6m_sata_ahci = 6, + /* constants for mapping table */ + P0 = 0, /* port 0 */ + P1 = 1, /* port 1 */ + P2 = 2, /* port 2 */ + P3 = 3, /* port 3 */ + IDE = -1, /* IDE */ + NA = -2, /* not avaliable */ + RV = -3, /* reserved */ + PIIX_AHCI_DEVICE = 6, }; +struct piix_map_db { + const u32 mask; + const int map[][4]; +}; + static int piix_init_one (struct pci_dev *pdev, const struct pci_device_id *ent); @@ -272,6 +283,43 @@ static const struct ata_port_operations piix_sata_ops = { .host_stop = ata_host_stop, }; +static struct piix_map_db ich5_map_db = { + .mask = 0x7, + .map = { + /* PM PS SM SS MAP */ + { P0, NA, P1, NA }, /* 000b */ + { P1, NA, P0, NA }, /* 001b */ + { RV, RV, RV, RV }, + { RV, RV, RV, RV }, + { P0, P1, IDE, IDE }, /* 100b */ + { P1, P0, IDE, IDE }, /* 101b */ + { IDE, IDE, P0, P1 }, /* 110b */ + { IDE, IDE, P1, P0 }, /* 111b */ + }, +}; + +static struct piix_map_db ich6_map_db = { + .mask = 0x3, + .map = { + /* PM PS SM SS MAP */ + { P0, P1, P2, P3 }, /* 00b */ + { IDE, IDE, P1, P3 }, /* 01b */ + { P0, P2, IDE, IDE }, /* 10b */ + { RV, RV, RV, RV }, + }, +}; + +static struct piix_map_db ich6m_map_db = { + .mask = 0x3, + .map = { + /* PM PS SM SS MAP */ + { P0, P1, P2, P3 }, /* 00b */ + { RV, RV, RV, RV }, + { P0, P2, IDE, IDE }, /* 10b */ + { RV, RV, RV, RV }, + }, +}; + static struct ata_port_info piix_port_info[] = { /* piix4_pata */ { @@ -310,6 +358,7 @@ static struct ata_port_info piix_port_info[] = { .mwdma_mask = 0x07, /* mwdma0-2 */ .udma_mask = 0x7f, /* udma0-6 */ .port_ops = &piix_sata_ops, + .private_data = &ich5_map_db, }, /* i6300esb_sata */ @@ -321,42 +370,45 @@ static struct ata_port_info piix_port_info[] = { .mwdma_mask = 0x07, /* mwdma0-2 */ .udma_mask = 0x7f, /* udma0-6 */ .port_ops = &piix_sata_ops, + .private_data = &ich5_map_db, }, /* ich6_sata */ { .sht = &piix_sht, .host_flags = ATA_FLAG_SATA | PIIX_FLAG_COMBINED_ICH6 | - PIIX_FLAG_CHECKINTR | ATA_FLAG_SLAVE_POSS | - PIIX_FLAG_SCR, + PIIX_FLAG_CHECKINTR | PIIX_FLAG_SCR, .pio_mask = 0x1f, /* pio0-4 */ .mwdma_mask = 0x07, /* mwdma0-2 */ .udma_mask = 0x7f, /* udma0-6 */ .port_ops = &piix_sata_ops, + .private_data = &ich6_map_db, }, /* ich6_sata_ahci */ { .sht = &piix_sht, .host_flags = ATA_FLAG_SATA | PIIX_FLAG_COMBINED_ICH6 | - PIIX_FLAG_CHECKINTR | ATA_FLAG_SLAVE_POSS | - PIIX_FLAG_SCR | PIIX_FLAG_AHCI, + PIIX_FLAG_CHECKINTR | PIIX_FLAG_SCR | + PIIX_FLAG_AHCI, .pio_mask = 0x1f, /* pio0-4 */ .mwdma_mask = 0x07, /* mwdma0-2 */ .udma_mask = 0x7f, /* udma0-6 */ .port_ops = &piix_sata_ops, + .private_data = &ich6_map_db, }, /* ich6m_sata_ahci */ { .sht = &piix_sht, .host_flags = ATA_FLAG_SATA | PIIX_FLAG_COMBINED_ICH6 | - PIIX_FLAG_CHECKINTR | ATA_FLAG_SLAVE_POSS | - PIIX_FLAG_SCR | PIIX_FLAG_AHCI, + PIIX_FLAG_CHECKINTR | PIIX_FLAG_SCR | + PIIX_FLAG_AHCI, .pio_mask = 0x1f, /* pio0-4 */ .mwdma_mask = 0x07, /* mwdma0-2 */ .udma_mask = 0x7f, /* udma0-6 */ .port_ops = &piix_sata_ops, + .private_data = &ich6m_map_db, }, }; @@ -708,6 +760,54 @@ static int __devinit piix_check_450nx_errata(struct pci_dev *ata_dev) return no_piix_dma; } +static void __devinit piix_init_sata_map(struct pci_dev *pdev, + struct ata_port_info *pinfo) +{ + struct piix_map_db *map_db = pinfo[0].private_data; + const unsigned int *map; + int i, invalid_map = 0; + u8 map_value; + + pci_read_config_byte(pdev, ICH5_PMR, &map_value); + + map = map_db->map[map_value & map_db->mask]; + + dev_printk(KERN_INFO, &pdev->dev, "MAP ["); + for (i = 0; i < 4; i++) { + switch (map[i]) { + case RV: + invalid_map = 1; + printk(" XX"); + break; + + case NA: + printk(" --"); + break; + + case IDE: + WARN_ON((i & 1) || map[i + 1] != IDE); + pinfo[i / 2] = piix_port_info[ich5_pata]; + i++; + printk(" IDE IDE"); + break; + + default: + printk(" P%d", map[i]); + if (i & 1) + pinfo[i / 2].host_flags |= ATA_FLAG_SLAVE_POSS; + break; + } + } + printk(" ]\n"); + + if (invalid_map) + dev_printk(KERN_ERR, &pdev->dev, + "invalid MAP value %u\n", map_value); + + pinfo[0].private_data = (void *)map; + pinfo[1].private_data = (void *)map; +} + /** * piix_init_one - Register PIIX ATA PCI device with kernel services * @pdev: PCI device to register @@ -726,9 +826,8 @@ static int __devinit piix_check_450nx_errata(struct pci_dev *ata_dev) static int piix_init_one (struct pci_dev *pdev, const struct pci_device_id *ent) { static int printed_version; - struct ata_port_info *port_info[2]; - unsigned int combined = 0; - unsigned int pata_chan = 0, sata_chan = 0; + struct ata_port_info port_info[2]; + struct ata_port_info *ppinfo[2] = { &port_info[0], &port_info[1] }; unsigned long host_flags; if (!printed_version++) @@ -739,10 +838,10 @@ static int piix_init_one (struct pci_dev *pdev, const struct pci_device_id *ent) if (!in_module_init) return -ENODEV; - port_info[0] = &piix_port_info[ent->driver_data]; - port_info[1] = &piix_port_info[ent->driver_data]; + port_info[0] = piix_port_info[ent->driver_data]; + port_info[1] = piix_port_info[ent->driver_data]; - host_flags = port_info[0]->host_flags; + host_flags = port_info[0].host_flags; if (host_flags & PIIX_FLAG_AHCI) { u8 tmp; @@ -754,37 +853,9 @@ static int piix_init_one (struct pci_dev *pdev, const struct pci_device_id *ent) } } - if (host_flags & PIIX_FLAG_COMBINED) { - u8 tmp; - pci_read_config_byte(pdev, ICH5_PMR, &tmp); - - if (host_flags & PIIX_FLAG_COMBINED_ICH6) { - switch (tmp & 0x3) { - case 0: - break; - case 1: - combined = 1; - sata_chan = 1; - break; - case 2: - combined = 1; - pata_chan = 1; - break; - case 3: - dev_printk(KERN_WARNING, &pdev->dev, - "invalid MAP value %u\n", tmp); - break; - } - } else { - if (tmp & PIIX_COMB) { - combined = 1; - if (tmp & PIIX_COMB_PATA_P0) - sata_chan = 1; - else - pata_chan = 1; - } - } - } + /* Initialize SATA map */ + if (host_flags & ATA_FLAG_SATA) + piix_init_sata_map(pdev, port_info); /* On ICH5, some BIOSen disable the interrupt using the * PCI_COMMAND_INTX_DISABLE bit added in PCI 2.3. @@ -795,25 +866,16 @@ static int piix_init_one (struct pci_dev *pdev, const struct pci_device_id *ent) if (host_flags & PIIX_FLAG_CHECKINTR) pci_intx(pdev, 1); - if (combined) { - port_info[sata_chan] = &piix_port_info[ent->driver_data]; - port_info[sata_chan]->host_flags |= ATA_FLAG_SLAVE_POSS; - port_info[pata_chan] = &piix_port_info[ich5_pata]; - - dev_printk(KERN_WARNING, &pdev->dev, - "combined mode detected (p=%u, s=%u)\n", - pata_chan, sata_chan); - } if (piix_check_450nx_errata(pdev)) { /* This writes into the master table but it does not really matter for this errata as we will apply it to all the PIIX devices on the board */ - port_info[0]->mwdma_mask = 0; - port_info[0]->udma_mask = 0; - port_info[1]->mwdma_mask = 0; - port_info[1]->udma_mask = 0; + port_info[0].mwdma_mask = 0; + port_info[0].udma_mask = 0; + port_info[1].mwdma_mask = 0; + port_info[1].udma_mask = 0; } - return ata_pci_init_one(pdev, port_info, 2); + return ata_pci_init_one(pdev, ppinfo, 2); } static int __init piix_init(void) -- cgit v1.2.1 From d133ecab8ff1233c2eb3ecb94f7956aa10002300 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Wed, 1 Mar 2006 01:25:39 +0900 Subject: [PATCH] ata_piix: reimplement piix_sata_probe() Reimplement piix_sata_probe() such that it turns on PCS enable bits on all avaliable ports and check present bits after a while to determine device presence. This should help broken BIOSes. After device presence detection is complete, PCS enable bits of unoccupied bits are turned off unless the controller supports AHCI (ICH6/7 docs mandate all enables bits are always set on AHCI capable controllers). Note that PCS present bits are ignored on 6300ESB as described in the datasheet. This should fix device detection problems reported with the controller. Signed-off-by: Tejun Heo Signed-off-by: Jeff Garzik --- drivers/scsi/ata_piix.c | 61 ++++++++++++++++++++++++++++++------------------- 1 file changed, 38 insertions(+), 23 deletions(-) (limited to 'drivers/scsi') diff --git a/drivers/scsi/ata_piix.c b/drivers/scsi/ata_piix.c index 4080b8be847b..72e38e6ea756 100644 --- a/drivers/scsi/ata_piix.c +++ b/drivers/scsi/ata_piix.c @@ -499,44 +499,59 @@ static int piix_pata_probe_reset(struct ata_port *ap, unsigned int *classes) * piix_sata_probe - Probe PCI device for present SATA devices * @ap: Port associated with the PCI device we wish to probe * - * Reads SATA PCI device's PCI config register Port Configuration - * and Status (PCS) to determine port and device availability. + * Reads and configures SATA PCI device's PCI config register + * Port Configuration and Status (PCS) to determine port and + * device availability. * * LOCKING: * None (inherited from caller). * * RETURNS: - * Non-zero if port is enabled, it may or may not have a device - * attached in that case (PRESENT bit would only be set if BIOS probe - * was done). Zero is returned if port is disabled. + * Mask of avaliable devices on the port. */ -static int piix_sata_probe (struct ata_port *ap) +static unsigned int piix_sata_probe (struct ata_port *ap) { struct pci_dev *pdev = to_pci_dev(ap->host_set->dev); - int combined = (ap->flags & ATA_FLAG_SLAVE_POSS); - int orig_mask, mask, i; + const unsigned int *map = ap->host_set->private_data; + int base = 2 * ap->hard_port_no; + unsigned int present_mask = 0; + int port, i; u8 pcs; pci_read_config_byte(pdev, ICH5_PCS, &pcs); - orig_mask = (int) pcs & 0xff; - - /* TODO: this is vaguely wrong for ICH6 combined mode, - * where only two of the four SATA ports are mapped - * onto a single ATA channel. It is also vaguely inaccurate - * for ICH5, which has only two ports. However, this is ok, - * as further device presence detection code will handle - * any false positives produced here. - */ + DPRINTK("ata%u: ENTER, pcs=0x%x base=%d\n", ap->id, pcs, base); - for (i = 0; i < 4; i++) { - mask = (PIIX_PORT_ENABLED << i); + /* enable all ports on this ap and wait for them to settle */ + for (i = 0; i < 2; i++) { + port = map[base + i]; + if (port >= 0) + pcs |= 1 << port; + } - if ((orig_mask & mask) == mask) - if (combined || (i == ap->hard_port_no)) - return 1; + pci_write_config_byte(pdev, ICH5_PCS, pcs); + msleep(100); + + /* let's see which devices are present */ + pci_read_config_byte(pdev, ICH5_PCS, &pcs); + + for (i = 0; i < 2; i++) { + port = map[base + i]; + if (port < 0) + continue; + if (ap->flags & PIIX_FLAG_IGN_PRESENT || pcs & 1 << (4 + port)) + present_mask |= 1 << i; + else + pcs &= ~(1 << port); } - return 0; + /* disable offline ports on non-AHCI controllers */ + if (!(ap->flags & PIIX_FLAG_AHCI)) + pci_write_config_byte(pdev, ICH5_PCS, pcs); + + DPRINTK("ata%u: LEAVE, pcs=0x%x present_mask=0x%x\n", + ap->id, pcs, present_mask); + + return present_mask; } /** -- cgit v1.2.1 From d9572b1d5e60b63e27e17f1f7771c5a26dd5d81e Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Wed, 1 Mar 2006 16:09:35 +0900 Subject: [PATCH] libata: convert dev->id to pointer Convert dev->id from array to pointer. This is to accomodate revalidation. During revalidation, both old and new IDENTIFY pages should be accessible and single ->id array doesn't cut it. Signed-off-by: Tejun Heo Signed-off-by: Jeff Garzik --- drivers/scsi/libata-core.c | 20 +++++++++++++++++--- 1 file changed, 17 insertions(+), 3 deletions(-) (limited to 'drivers/scsi') diff --git a/drivers/scsi/libata-core.c b/drivers/scsi/libata-core.c index e34b421eb2a3..fecda706d85f 100644 --- a/drivers/scsi/libata-core.c +++ b/drivers/scsi/libata-core.c @@ -911,7 +911,7 @@ unsigned int ata_pio_need_iordy(const struct ata_device *adev) * @dev: target device * @p_class: pointer to class of the target device (may be changed) * @post_reset: is this read ID post-reset? - * @id: buffer to fill IDENTIFY page into + * @p_id: read IDENTIFY page (newly allocated) * * Read ID data from the specified device. ATA_CMD_ID_ATA is * performed on ATA devices and ATA_CMD_ID_ATAPI on ATAPI @@ -926,12 +926,13 @@ unsigned int ata_pio_need_iordy(const struct ata_device *adev) * 0 on success, -errno otherwise. */ static int ata_dev_read_id(struct ata_port *ap, struct ata_device *dev, - unsigned int *p_class, int post_reset, u16 *id) + unsigned int *p_class, int post_reset, u16 **p_id) { unsigned int class = *p_class; unsigned int using_edd; struct ata_taskfile tf; unsigned int err_mask = 0; + u16 *id; const char *reason; int rc; @@ -945,6 +946,13 @@ static int ata_dev_read_id(struct ata_port *ap, struct ata_device *dev, ata_dev_select(ap, dev->devno, 1, 1); /* select device 0/1 */ + id = kmalloc(sizeof(id[0]) * ATA_ID_WORDS, GFP_KERNEL); + if (id == NULL) { + rc = -ENOMEM; + reason = "out of memory"; + goto err_out; + } + retry: ata_tf_init(ap, &tf, dev->devno); @@ -1035,11 +1043,13 @@ static int ata_dev_read_id(struct ata_port *ap, struct ata_device *dev, } *p_class = class; + *p_id = id; return 0; err_out: printk(KERN_WARNING "ata%u: dev %u failed to IDENTIFY (%s)\n", ap->id, dev->devno, reason); + kfree(id); return rc; } @@ -1079,7 +1089,8 @@ static void ata_dev_identify(struct ata_port *ap, unsigned int device) DPRINTK("ENTER, host %u, dev %u\n", ap->id, device); - rc = ata_dev_read_id(ap, dev, &dev->class, 1, dev->id); + WARN_ON(dev->id != NULL); + rc = ata_dev_read_id(ap, dev, &dev->class, 1, &dev->id); if (rc) goto err_out; @@ -4732,11 +4743,14 @@ void ata_host_set_remove(struct ata_host_set *host_set) int ata_scsi_release(struct Scsi_Host *host) { struct ata_port *ap = (struct ata_port *) &host->hostdata[0]; + int i; DPRINTK("ENTER\n"); ap->ops->port_disable(ap); ata_host_remove(ap, 0); + for (i = 0; i < ATA_MAX_DEVICES; i++) + kfree(ap->device[i].id); DPRINTK("EXIT\n"); return 1; -- cgit v1.2.1 From ffeae418c12a304f6a9b6468043954d4e67a2b1e Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Wed, 1 Mar 2006 16:09:35 +0900 Subject: [PATCH] libata: separate out ata_dev_configure() Separate out ata_dev_configure() from ata_dev_identify() such that ata_dev_configure() only configures @dev according to passed in @id. The function now does not disable device on failure, it just returns appropirate error code. As this change leaves ata_dev_identify() with only reading ID, calling configure and disabling devices according to the results, this patch also kills ata_dev_identify() and inlines the logic into ata_bus_probe(). Signed-off-by: Tejun Heo Signed-off-by: Jeff Garzik --- drivers/scsi/libata-core.c | 80 +++++++++++++++++++++++----------------------- 1 file changed, 40 insertions(+), 40 deletions(-) (limited to 'drivers/scsi') diff --git a/drivers/scsi/libata-core.c b/drivers/scsi/libata-core.c index fecda706d85f..ba26c66cc11b 100644 --- a/drivers/scsi/libata-core.c +++ b/drivers/scsi/libata-core.c @@ -1054,45 +1054,31 @@ static int ata_dev_read_id(struct ata_port *ap, struct ata_device *dev, } /** - * ata_dev_identify - obtain IDENTIFY x DEVICE page - * @ap: port on which device we wish to probe resides - * @device: device bus address, starting at zero - * - * Following bus reset, we issue the IDENTIFY [PACKET] DEVICE - * command, and read back the 512-byte device information page. - * The device information page is fed to us via the standard - * PIO-IN protocol, but we hand-code it here. (TODO: investigate - * using standard PIO-IN paths) - * - * After reading the device information page, we use several - * bits of information from it to initialize data structures - * that will be used during the lifetime of the ata_device. - * Other data from the info page is used to disqualify certain - * older ATA devices we do not wish to support. + * ata_dev_configure - Configure the specified ATA/ATAPI device + * @ap: Port on which target device resides + * @dev: Target device to configure + * + * Configure @dev according to @dev->id. Generic and low-level + * driver specific fixups are also applied. * * LOCKING: - * Inherited from caller. Some functions called by this function - * obtain the host_set lock. + * Kernel thread context (may sleep) + * + * RETURNS: + * 0 on success, -errno otherwise */ - -static void ata_dev_identify(struct ata_port *ap, unsigned int device) +static int ata_dev_configure(struct ata_port *ap, struct ata_device *dev) { - struct ata_device *dev = &ap->device[device]; unsigned long xfer_modes; int i, rc; if (!ata_dev_present(dev)) { DPRINTK("ENTER/EXIT (host %u, dev %u) -- nodev\n", - ap->id, device); - return; + ap->id, dev->devno); + return 0; } - DPRINTK("ENTER, host %u, dev %u\n", ap->id, device); - - WARN_ON(dev->id != NULL); - rc = ata_dev_read_id(ap, dev, &dev->class, 1, &dev->id); - if (rc) - goto err_out; + DPRINTK("ENTER, host %u, dev %u\n", ap->id, dev->devno); /* * common ATA, ATAPI feature tests @@ -1101,6 +1087,7 @@ static void ata_dev_identify(struct ata_port *ap, unsigned int device) /* we require DMA support (bits 8 of word 49) */ if (!ata_id_has_dma(dev->id)) { printk(KERN_DEBUG "ata%u: no dma\n", ap->id); + rc = -EINVAL; goto err_out_nosup; } @@ -1125,12 +1112,12 @@ static void ata_dev_identify(struct ata_port *ap, unsigned int device) /* print device info to dmesg */ printk(KERN_INFO "ata%u: dev %u ATA-%d, max %s, %Lu sectors:%s\n", - ap->id, device, + ap->id, dev->devno, ata_id_major_version(dev->id), ata_mode_string(xfer_modes), (unsigned long long)dev->n_sectors, dev->flags & ATA_DFLAG_LBA48 ? " LBA48" : " LBA"); - } else { + } else { /* CHS */ /* Default translation */ @@ -1147,7 +1134,7 @@ static void ata_dev_identify(struct ata_port *ap, unsigned int device) /* print device info to dmesg */ printk(KERN_INFO "ata%u: dev %u ATA-%d, max %s, %Lu sectors: CHS %d/%d/%d\n", - ap->id, device, + ap->id, dev->devno, ata_id_major_version(dev->id), ata_mode_string(xfer_modes), (unsigned long long)dev->n_sectors, @@ -1163,13 +1150,14 @@ static void ata_dev_identify(struct ata_port *ap, unsigned int device) rc = atapi_cdb_len(dev->id); if ((rc < 12) || (rc > ATAPI_CDB_LEN)) { printk(KERN_WARNING "ata%u: unsupported CDB len\n", ap->id); + rc = -EINVAL; goto err_out_nosup; } dev->cdb_len = (unsigned int) rc; /* print device info to dmesg */ printk(KERN_INFO "ata%u: dev %u ATAPI, max %s\n", - ap->id, device, + ap->id, dev->devno, ata_mode_string(xfer_modes)); } @@ -1180,14 +1168,13 @@ static void ata_dev_identify(struct ata_port *ap, unsigned int device) ap->device[i].cdb_len); DPRINTK("EXIT, drv_stat = 0x%x\n", ata_chk_status(ap)); - return; + return 0; err_out_nosup: printk(KERN_WARNING "ata%u: dev %u not supported, ignoring\n", - ap->id, device); -err_out: - dev->class++; /* converts ATA_DEV_xxx into ATA_DEV_xxx_UNSUP */ + ap->id, dev->devno); DPRINTK("EXIT, err\n"); + return rc; } @@ -1263,11 +1250,24 @@ static int ata_bus_probe(struct ata_port *ap) goto err_out; for (i = 0; i < ATA_MAX_DEVICES; i++) { - ata_dev_identify(ap, i); - if (ata_dev_present(&ap->device[i])) { - found = 1; - ata_dev_config(ap,i); + struct ata_device *dev = &ap->device[i]; + + if (!ata_dev_present(dev)) + continue; + + WARN_ON(dev->id != NULL); + if (ata_dev_read_id(ap, dev, &dev->class, 1, &dev->id)) { + dev->class = ATA_DEV_NONE; + continue; } + + if (ata_dev_configure(ap, dev)) { + dev->class++; /* disable device */ + continue; + } + + ata_dev_config(ap, i); + found = 1; } if ((!found) || (ap->flags & ATA_FLAG_PORT_DISABLED)) -- cgit v1.2.1 From 4b2f3ededc035525038a7a9247074243dac6b351 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Wed, 1 Mar 2006 16:09:36 +0900 Subject: [PATCH] libata: fold ata_dev_config() into ata_dev_configure() ata_dev_config() needs to be done everytime a device is configured. Fold it into ata_dev_configure(). Signed-off-by: Tejun Heo Signed-off-by: Jeff Garzik --- drivers/scsi/libata-core.c | 48 ++++++++++++++++------------------------------ 1 file changed, 17 insertions(+), 31 deletions(-) (limited to 'drivers/scsi') diff --git a/drivers/scsi/libata-core.c b/drivers/scsi/libata-core.c index ba26c66cc11b..10803f72c57d 100644 --- a/drivers/scsi/libata-core.c +++ b/drivers/scsi/libata-core.c @@ -1053,6 +1053,12 @@ static int ata_dev_read_id(struct ata_port *ap, struct ata_device *dev, return rc; } +static inline u8 ata_dev_knobble(const struct ata_port *ap, + struct ata_device *dev) +{ + return ((ap->cbl == ATA_CBL_SATA) && (!ata_id_is_sata(dev->id))); +} + /** * ata_dev_configure - Configure the specified ATA/ATAPI device * @ap: Port on which target device resides @@ -1167,6 +1173,17 @@ static int ata_dev_configure(struct ata_port *ap, struct ata_device *dev) ap->host->max_cmd_len, ap->device[i].cdb_len); + /* limit bridge transfers to udma5, 200 sectors */ + if (ata_dev_knobble(ap, dev)) { + printk(KERN_INFO "ata%u(%u): applying bridge limits\n", + ap->id, dev->devno); + ap->udma_mask &= ATA_UDMA5; + dev->max_sectors = ATA_MAX_SECTORS; + } + + if (ap->ops->dev_config) + ap->ops->dev_config(ap, dev); + DPRINTK("EXIT, drv_stat = 0x%x\n", ata_chk_status(ap)); return 0; @@ -1177,35 +1194,6 @@ err_out_nosup: return rc; } - -static inline u8 ata_dev_knobble(const struct ata_port *ap, - struct ata_device *dev) -{ - return ((ap->cbl == ATA_CBL_SATA) && (!ata_id_is_sata(dev->id))); -} - -/** - * ata_dev_config - Run device specific handlers & check for SATA->PATA bridges - * @ap: Bus - * @i: Device - * - * LOCKING: - */ - -void ata_dev_config(struct ata_port *ap, unsigned int i) -{ - /* limit bridge transfers to udma5, 200 sectors */ - if (ata_dev_knobble(ap, &ap->device[i])) { - printk(KERN_INFO "ata%u(%u): applying bridge limits\n", - ap->id, i); - ap->udma_mask &= ATA_UDMA5; - ap->device[i].max_sectors = ATA_MAX_SECTORS; - } - - if (ap->ops->dev_config) - ap->ops->dev_config(ap, &ap->device[i]); -} - /** * ata_bus_probe - Reset and probe ATA bus * @ap: Bus to probe @@ -1266,7 +1254,6 @@ static int ata_bus_probe(struct ata_port *ap) continue; } - ata_dev_config(ap, i); found = 1; } @@ -4967,7 +4954,6 @@ EXPORT_SYMBOL_GPL(ata_host_intr); EXPORT_SYMBOL_GPL(ata_dev_classify); EXPORT_SYMBOL_GPL(ata_id_string); EXPORT_SYMBOL_GPL(ata_id_c_string); -EXPORT_SYMBOL_GPL(ata_dev_config); EXPORT_SYMBOL_GPL(ata_scsi_simulate); EXPORT_SYMBOL_GPL(ata_eh_qc_complete); EXPORT_SYMBOL_GPL(ata_eh_qc_retry); -- cgit v1.2.1 From 28ca5c57dc9f235f7cba609f2b541328de47beb2 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Wed, 1 Mar 2006 16:09:36 +0900 Subject: [PATCH] libata: reorganize ata_bus_probe() Now that reset and configure are converted such that they don't modify or disable libata core data structures, reorganize ata_bus_probe() to reflect this change. Signed-off-by: Tejun Heo Signed-off-by: Jeff Garzik --- drivers/scsi/libata-core.c | 46 +++++++++++++++++++++++++--------------------- 1 file changed, 25 insertions(+), 21 deletions(-) (limited to 'drivers/scsi') diff --git a/drivers/scsi/libata-core.c b/drivers/scsi/libata-core.c index 10803f72c57d..b710fc480740 100644 --- a/drivers/scsi/libata-core.c +++ b/drivers/scsi/libata-core.c @@ -1211,35 +1211,40 @@ err_out_nosup: static int ata_bus_probe(struct ata_port *ap) { - unsigned int i, found = 0; + unsigned int classes[ATA_MAX_DEVICES]; + unsigned int i, rc, found = 0; - if (ap->ops->probe_reset) { - unsigned int classes[ATA_MAX_DEVICES]; - int rc; - - ata_port_probe(ap); + ata_port_probe(ap); + /* reset */ + if (ap->ops->probe_reset) { rc = ap->ops->probe_reset(ap, classes); - if (rc == 0) { - for (i = 0; i < ATA_MAX_DEVICES; i++) { - if (classes[i] == ATA_DEV_UNKNOWN) - classes[i] = ATA_DEV_NONE; - ap->device[i].class = classes[i]; - } - } else { - printk(KERN_ERR "ata%u: probe reset failed, " - "disabling port\n", ap->id); - ata_port_disable(ap); + if (rc) { + printk("ata%u: reset failed (errno=%d)\n", ap->id, rc); + return rc; } - } else + + for (i = 0; i < ATA_MAX_DEVICES; i++) + if (classes[i] == ATA_DEV_UNKNOWN) + classes[i] = ATA_DEV_NONE; + } else { ap->ops->phy_reset(ap); - if (ap->flags & ATA_FLAG_PORT_DISABLED) - goto err_out; + for (i = 0; i < ATA_MAX_DEVICES; i++) { + if (!(ap->flags & ATA_FLAG_PORT_DISABLED)) + classes[i] = ap->device[i].class; + else + ap->device[i].class = ATA_DEV_UNKNOWN; + } + ata_port_probe(ap); + } + /* read IDENTIFY page and configure devices */ for (i = 0; i < ATA_MAX_DEVICES; i++) { struct ata_device *dev = &ap->device[i]; + dev->class = classes[i]; + if (!ata_dev_present(dev)) continue; @@ -1257,7 +1262,7 @@ static int ata_bus_probe(struct ata_port *ap) found = 1; } - if ((!found) || (ap->flags & ATA_FLAG_PORT_DISABLED)) + if (!found) goto err_out_disable; ata_set_mode(ap); @@ -1268,7 +1273,6 @@ static int ata_bus_probe(struct ata_port *ap) err_out_disable: ap->ops->port_disable(ap); -err_out: return -1; } -- cgit v1.2.1 From e1fd263c772e89706dee28aa794399ac4bd6b9c1 Mon Sep 17 00:00:00 2001 From: Daniel Drake Date: Sat, 4 Mar 2006 15:36:21 +0000 Subject: [PATCH] sata_promise: Support FastTrak TX4300/TX4310 This patch adds support for the Promise FastTrak TX4300/TX4310 4-port PCI SATA controllers based on the PDC40719 chip. Signed-off-by: Daniel Drake Signed-off-by: Jeff Garzik --- drivers/scsi/sata_promise.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'drivers/scsi') diff --git a/drivers/scsi/sata_promise.c b/drivers/scsi/sata_promise.c index ba2b7a0983db..84cb3940ad88 100644 --- a/drivers/scsi/sata_promise.c +++ b/drivers/scsi/sata_promise.c @@ -255,6 +255,8 @@ static const struct pci_device_id pdc_ata_pci_tbl[] = { board_20319 }, { PCI_VENDOR_ID_PROMISE, 0x3319, PCI_ANY_ID, PCI_ANY_ID, 0, 0, board_20319 }, + { PCI_VENDOR_ID_PROMISE, 0x3515, PCI_ANY_ID, PCI_ANY_ID, 0, 0, + board_20319 }, { PCI_VENDOR_ID_PROMISE, 0x3519, PCI_ANY_ID, PCI_ANY_ID, 0, 0, board_20319 }, { PCI_VENDOR_ID_PROMISE, 0x3d17, PCI_ANY_ID, PCI_ANY_ID, 0, 0, -- cgit v1.2.1 From 219e621443a1d0bba2a6d15cbc9a1181892c6d79 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Sun, 5 Mar 2006 14:28:51 +0900 Subject: [PATCH] ata_piix: rename PIIX_FLAG_IGN_PRESENT to PIIX_FLAG_IGNORE_PCS Rename PIIX_FLAG_IGN_PRESENT to PIIX_FLAG_IGNORE_PCS as Jeff requested. Signed-off-by: Tejun Heo Cc: Jeff Garzik Signed-off-by: Jeff Garzik --- drivers/scsi/ata_piix.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'drivers/scsi') diff --git a/drivers/scsi/ata_piix.c b/drivers/scsi/ata_piix.c index 72e38e6ea756..9327b62f97de 100644 --- a/drivers/scsi/ata_piix.c +++ b/drivers/scsi/ata_piix.c @@ -101,7 +101,7 @@ enum { ICH5_PCS = 0x92, /* port control and status */ PIIX_SCC = 0x0A, /* sub-class code register */ - PIIX_FLAG_IGN_PRESENT = (1 << 25), /* ignore PCS present bits */ + PIIX_FLAG_IGNORE_PCS = (1 << 25), /* ignore PCS present bits */ PIIX_FLAG_SCR = (1 << 26), /* SCR available */ PIIX_FLAG_AHCI = (1 << 27), /* AHCI possible */ PIIX_FLAG_CHECKINTR = (1 << 28), /* make sure PCI INTx enabled */ @@ -365,7 +365,7 @@ static struct ata_port_info piix_port_info[] = { { .sht = &piix_sht, .host_flags = ATA_FLAG_SATA | PIIX_FLAG_COMBINED | - PIIX_FLAG_CHECKINTR | PIIX_FLAG_IGN_PRESENT, + PIIX_FLAG_CHECKINTR | PIIX_FLAG_IGNORE_PCS, .pio_mask = 0x1f, /* pio0-4 */ .mwdma_mask = 0x07, /* mwdma0-2 */ .udma_mask = 0x7f, /* udma0-6 */ @@ -538,7 +538,7 @@ static unsigned int piix_sata_probe (struct ata_port *ap) port = map[base + i]; if (port < 0) continue; - if (ap->flags & PIIX_FLAG_IGN_PRESENT || pcs & 1 << (4 + port)) + if (ap->flags & PIIX_FLAG_IGNORE_PCS || pcs & 1 << (4 + port)) present_mask |= 1 << i; else pcs &= ~(1 << port); -- cgit v1.2.1 From 81c2af3561db54a4d3b439c84c58d8c2a469ec9b Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Sun, 5 Mar 2006 16:03:52 +0900 Subject: [PATCH] sata_sil: replace sil_3112_m15w board id with sil_3112 All 3112's have m15w. Replace sil_3112_m15w with sil_3112 and flag sil_3112 with SIL_FLAG_MOD15WRITE. Signed-off-by: Tejun Heo Cc: Carlos Pardo Signed-off-by: Jeff Garzik --- drivers/scsi/sata_sil.c | 25 +++++++------------------ 1 file changed, 7 insertions(+), 18 deletions(-) (limited to 'drivers/scsi') diff --git a/drivers/scsi/sata_sil.c b/drivers/scsi/sata_sil.c index cdf800e3ec13..8cb662d537a3 100644 --- a/drivers/scsi/sata_sil.c +++ b/drivers/scsi/sata_sil.c @@ -53,9 +53,8 @@ enum { SIL_FLAG_MOD15WRITE = (1 << 30), sil_3112 = 0, - sil_3112_m15w = 1, - sil_3512 = 2, - sil_3114 = 3, + sil_3512 = 1, + sil_3114 = 2, SIL_FIFO_R0 = 0x40, SIL_FIFO_W0 = 0x41, @@ -90,13 +89,13 @@ static void sil_post_set_mode (struct ata_port *ap); static const struct pci_device_id sil_pci_tbl[] = { - { 0x1095, 0x3112, PCI_ANY_ID, PCI_ANY_ID, 0, 0, sil_3112_m15w }, - { 0x1095, 0x0240, PCI_ANY_ID, PCI_ANY_ID, 0, 0, sil_3112_m15w }, + { 0x1095, 0x3112, PCI_ANY_ID, PCI_ANY_ID, 0, 0, sil_3112 }, + { 0x1095, 0x0240, PCI_ANY_ID, PCI_ANY_ID, 0, 0, sil_3112 }, { 0x1095, 0x3512, PCI_ANY_ID, PCI_ANY_ID, 0, 0, sil_3512 }, { 0x1095, 0x3114, PCI_ANY_ID, PCI_ANY_ID, 0, 0, sil_3114 }, - { 0x1002, 0x436e, PCI_ANY_ID, PCI_ANY_ID, 0, 0, sil_3112_m15w }, - { 0x1002, 0x4379, PCI_ANY_ID, PCI_ANY_ID, 0, 0, sil_3112_m15w }, - { 0x1002, 0x437a, PCI_ANY_ID, PCI_ANY_ID, 0, 0, sil_3112_m15w }, + { 0x1002, 0x436e, PCI_ANY_ID, PCI_ANY_ID, 0, 0, sil_3112 }, + { 0x1002, 0x4379, PCI_ANY_ID, PCI_ANY_ID, 0, 0, sil_3112 }, + { 0x1002, 0x437a, PCI_ANY_ID, PCI_ANY_ID, 0, 0, sil_3112 }, { } /* terminate list */ }; @@ -179,16 +178,6 @@ static const struct ata_port_operations sil_ops = { static const struct ata_port_info sil_port_info[] = { /* sil_3112 */ - { - .sht = &sil_sht, - .host_flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY | - ATA_FLAG_MMIO, - .pio_mask = 0x1f, /* pio0-4 */ - .mwdma_mask = 0x07, /* mwdma0-2 */ - .udma_mask = 0x3f, /* udma0-5 */ - .port_ops = &sil_ops, - }, - /* sil_3112_15w - keep it sync'd w/ sil_3112 */ { .sht = &sil_sht, .host_flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY | -- cgit v1.2.1 From 9a5314432a07251c2a8d71bfc793adcf00f4122e Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Sun, 5 Mar 2006 16:03:52 +0900 Subject: [PATCH] sata_sil: use kzalloc Use kzalloc instead of kmalloc/memset. Signed-off-by: Tejun Heo Signed-off-by: Jeff Garzik --- drivers/scsi/sata_sil.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) (limited to 'drivers/scsi') diff --git a/drivers/scsi/sata_sil.c b/drivers/scsi/sata_sil.c index 8cb662d537a3..5cdcb9db3e71 100644 --- a/drivers/scsi/sata_sil.c +++ b/drivers/scsi/sata_sil.c @@ -407,13 +407,12 @@ static int sil_init_one (struct pci_dev *pdev, const struct pci_device_id *ent) if (rc) goto err_out_regions; - probe_ent = kmalloc(sizeof(*probe_ent), GFP_KERNEL); + probe_ent = kzalloc(sizeof(*probe_ent), GFP_KERNEL); if (probe_ent == NULL) { rc = -ENOMEM; goto err_out_regions; } - memset(probe_ent, 0, sizeof(*probe_ent)); INIT_LIST_HEAD(&probe_ent->node); probe_ent->dev = pci_dev_to_dev(pdev); probe_ent->port_ops = sil_port_info[ent->driver_data].port_ops; -- cgit v1.2.1 From 48d4ef2a1df9867c67b515d66732ba028a73735d Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Sun, 5 Mar 2006 16:03:52 +0900 Subject: [PATCH] sata_sil: replace register address constants with sil_port[] entry Kill SIL_FIFO_* and SIL_IDE2_BMDMA and replace them with proper sil_port[] entry. Signed-off-by: Tejun Heo Signed-off-by: Jeff Garzik --- drivers/scsi/sata_sil.c | 39 +++++++++++---------------------------- 1 file changed, 11 insertions(+), 28 deletions(-) (limited to 'drivers/scsi') diff --git a/drivers/scsi/sata_sil.c b/drivers/scsi/sata_sil.c index 5cdcb9db3e71..81bdc10a6e95 100644 --- a/drivers/scsi/sata_sil.c +++ b/drivers/scsi/sata_sil.c @@ -56,15 +56,6 @@ enum { sil_3512 = 1, sil_3114 = 2, - SIL_FIFO_R0 = 0x40, - SIL_FIFO_W0 = 0x41, - SIL_FIFO_R1 = 0x44, - SIL_FIFO_W1 = 0x45, - SIL_FIFO_R2 = 0x240, - SIL_FIFO_W2 = 0x241, - SIL_FIFO_R3 = 0x244, - SIL_FIFO_W3 = 0x245, - SIL_SYSCFG = 0x48, SIL_MASK_IDE0_INT = (1 << 22), SIL_MASK_IDE1_INT = (1 << 23), @@ -74,8 +65,6 @@ enum { SIL_MASK_4PORT = SIL_MASK_2PORT | SIL_MASK_IDE2_INT | SIL_MASK_IDE3_INT, - SIL_IDE2_BMDMA = 0x200, - SIL_INTR_STEERING = (1 << 1), SIL_QUIRK_MOD15WRITE = (1 << 0), SIL_QUIRK_UDMA5MAX = (1 << 1), @@ -217,16 +206,17 @@ static const struct { unsigned long tf; /* ATA taskfile register block */ unsigned long ctl; /* ATA control/altstatus register block */ unsigned long bmdma; /* DMA register block */ + unsigned long fifo_cfg; /* FIFO Valid Byte Count and Control */ unsigned long scr; /* SATA control register block */ unsigned long sien; /* SATA Interrupt Enable register */ unsigned long xfer_mode;/* data transfer mode register */ unsigned long sfis_cfg; /* SATA FIS reception config register */ } sil_port[] = { /* port 0 ... */ - { 0x80, 0x8A, 0x00, 0x100, 0x148, 0xb4, 0x14c }, - { 0xC0, 0xCA, 0x08, 0x180, 0x1c8, 0xf4, 0x1cc }, - { 0x280, 0x28A, 0x200, 0x300, 0x348, 0x2b4, 0x34c }, - { 0x2C0, 0x2CA, 0x208, 0x380, 0x3c8, 0x2f4, 0x3cc }, + { 0x80, 0x8A, 0x00, 0x40, 0x100, 0x148, 0xb4, 0x14c }, + { 0xC0, 0xCA, 0x08, 0x44, 0x180, 0x1c8, 0xf4, 0x1cc }, + { 0x280, 0x28A, 0x200, 0x240, 0x300, 0x348, 0x2b4, 0x34c }, + { 0x2C0, 0x2CA, 0x208, 0x244, 0x380, 0x3c8, 0x2f4, 0x3cc }, /* ... port 3 */ }; @@ -449,19 +439,12 @@ static int sil_init_one (struct pci_dev *pdev, const struct pci_device_id *ent) if (cls) { cls >>= 3; cls++; /* cls = (line_size/8)+1 */ - writeb(cls, mmio_base + SIL_FIFO_R0); - writeb(cls, mmio_base + SIL_FIFO_W0); - writeb(cls, mmio_base + SIL_FIFO_R1); - writeb(cls, mmio_base + SIL_FIFO_W1); - if (ent->driver_data == sil_3114) { - writeb(cls, mmio_base + SIL_FIFO_R2); - writeb(cls, mmio_base + SIL_FIFO_W2); - writeb(cls, mmio_base + SIL_FIFO_R3); - writeb(cls, mmio_base + SIL_FIFO_W3); - } + for (i = 0; i < probe_ent->n_ports; i++) + writew(cls << 8 | cls, + mmio_base + sil_port[i].fifo_cfg); } else dev_printk(KERN_WARNING, &pdev->dev, - "cache line size not set. Driver may not function\n"); + "cache line size not set. Driver may not function\n"); /* Apply R_ERR on DMA activate FIS errata workaround */ if (probe_ent->host_flags & SIL_FLAG_RERR_ON_DMA_ACT) { @@ -484,10 +467,10 @@ static int sil_init_one (struct pci_dev *pdev, const struct pci_device_id *ent) irq_mask = SIL_MASK_4PORT; /* flip the magic "make 4 ports work" bit */ - tmp = readl(mmio_base + SIL_IDE2_BMDMA); + tmp = readl(mmio_base + sil_port[2].bmdma); if ((tmp & SIL_INTR_STEERING) == 0) writel(tmp | SIL_INTR_STEERING, - mmio_base + SIL_IDE2_BMDMA); + mmio_base + sil_port[2].bmdma); } else { irq_mask = SIL_MASK_2PORT; -- cgit v1.2.1 From e653a1e6131d0a819288a2e2de654627233604e0 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Sun, 5 Mar 2006 16:03:52 +0900 Subject: [PATCH] sata_sil: cosmetic flag/constant changes Collect common host flags into SIL_DFL_HOST_FLAGS and add comments to constants. Signed-off-by: Tejun Heo Signed-off-by: Jeff Garzik --- drivers/scsi/sata_sil.c | 32 ++++++++++++++++++++++++-------- 1 file changed, 24 insertions(+), 8 deletions(-) (limited to 'drivers/scsi') diff --git a/drivers/scsi/sata_sil.c b/drivers/scsi/sata_sil.c index 81bdc10a6e95..4f2a67ed39d8 100644 --- a/drivers/scsi/sata_sil.c +++ b/drivers/scsi/sata_sil.c @@ -49,14 +49,30 @@ #define DRV_VERSION "0.9" enum { + /* + * host flags + */ SIL_FLAG_RERR_ON_DMA_ACT = (1 << 29), SIL_FLAG_MOD15WRITE = (1 << 30), + SIL_DFL_HOST_FLAGS = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY | + ATA_FLAG_MMIO, + /* + * Controller IDs + */ sil_3112 = 0, sil_3512 = 1, sil_3114 = 2, + /* + * Register offsets + */ SIL_SYSCFG = 0x48, + + /* + * Register bits + */ + /* SYSCFG */ SIL_MASK_IDE0_INT = (1 << 22), SIL_MASK_IDE1_INT = (1 << 23), SIL_MASK_IDE2_INT = (1 << 24), @@ -65,7 +81,12 @@ enum { SIL_MASK_4PORT = SIL_MASK_2PORT | SIL_MASK_IDE2_INT | SIL_MASK_IDE3_INT, + /* BMDMA/BMDMA2 */ SIL_INTR_STEERING = (1 << 1), + + /* + * Others + */ SIL_QUIRK_MOD15WRITE = (1 << 0), SIL_QUIRK_UDMA5MAX = (1 << 1), }; @@ -169,8 +190,7 @@ static const struct ata_port_info sil_port_info[] = { /* sil_3112 */ { .sht = &sil_sht, - .host_flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY | - ATA_FLAG_MMIO | SIL_FLAG_MOD15WRITE, + .host_flags = SIL_DFL_HOST_FLAGS | SIL_FLAG_MOD15WRITE, .pio_mask = 0x1f, /* pio0-4 */ .mwdma_mask = 0x07, /* mwdma0-2 */ .udma_mask = 0x3f, /* udma0-5 */ @@ -179,9 +199,7 @@ static const struct ata_port_info sil_port_info[] = { /* sil_3512 */ { .sht = &sil_sht, - .host_flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY | - ATA_FLAG_MMIO | - SIL_FLAG_RERR_ON_DMA_ACT, + .host_flags = SIL_DFL_HOST_FLAGS | SIL_FLAG_RERR_ON_DMA_ACT, .pio_mask = 0x1f, /* pio0-4 */ .mwdma_mask = 0x07, /* mwdma0-2 */ .udma_mask = 0x3f, /* udma0-5 */ @@ -190,9 +208,7 @@ static const struct ata_port_info sil_port_info[] = { /* sil_3114 */ { .sht = &sil_sht, - .host_flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY | - ATA_FLAG_MMIO | - SIL_FLAG_RERR_ON_DMA_ACT, + .host_flags = SIL_DFL_HOST_FLAGS | SIL_FLAG_RERR_ON_DMA_ACT, .pio_mask = 0x1f, /* pio0-4 */ .mwdma_mask = 0x07, /* mwdma0-2 */ .udma_mask = 0x3f, /* udma0-5 */ -- cgit v1.2.1 From cdaeedae9844ec3deaafa00b7dd8c21e01368633 Mon Sep 17 00:00:00 2001 From: Dominik Brodowski Date: Sun, 5 Mar 2006 11:42:06 +0100 Subject: [SCSI] scsi: aha152x pcmcia driver needs spi transport AHA152X PCMCIA module needs spi_print_msg. Signed-off-by: Dominik Brodowski Signed-off-by: James Bottomley --- drivers/scsi/pcmcia/Kconfig | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers/scsi') diff --git a/drivers/scsi/pcmcia/Kconfig b/drivers/scsi/pcmcia/Kconfig index df52190f4d94..eac8e179cfff 100644 --- a/drivers/scsi/pcmcia/Kconfig +++ b/drivers/scsi/pcmcia/Kconfig @@ -8,6 +8,7 @@ menu "PCMCIA SCSI adapter support" config PCMCIA_AHA152X tristate "Adaptec AHA152X PCMCIA support" depends on m && !64BIT + select SCSI_SPI_ATTRS help Say Y here if you intend to attach this type of PCMCIA SCSI host adapter to your computer. -- cgit v1.2.1 From 208a9933bc7d71e7ad194a9ffbfbcd7878c48dfe Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Sun, 5 Mar 2006 17:55:58 +0900 Subject: [PATCH] libata: re-initialize parameters before configuring In ata_dev_configure(), reinitialize parameters before configuring. This change is for revalidation and hotplug. As ata_dev_configure() can be entered multiple times, parameters need to be reinitialized. Signed-off-by: Tejun Heo Signed-off-by: Jeff Garzik --- drivers/scsi/libata-core.c | 9 +++++++++ 1 file changed, 9 insertions(+) (limited to 'drivers/scsi') diff --git a/drivers/scsi/libata-core.c b/drivers/scsi/libata-core.c index b710fc480740..59828490a750 100644 --- a/drivers/scsi/libata-core.c +++ b/drivers/scsi/libata-core.c @@ -1086,6 +1086,15 @@ static int ata_dev_configure(struct ata_port *ap, struct ata_device *dev) DPRINTK("ENTER, host %u, dev %u\n", ap->id, dev->devno); + /* initialize to-be-configured parameters */ + dev->flags = 0; + dev->max_sectors = 0; + dev->cdb_len = 0; + dev->n_sectors = 0; + dev->cylinders = 0; + dev->heads = 0; + dev->sectors = 0; + /* * common ATA, ATAPI feature tests */ -- cgit v1.2.1 From 4c2d721ab6413ee4ff33617ed1413458261f36ea Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Sun, 5 Mar 2006 17:55:58 +0900 Subject: [PATCH] libata: add @print_info argument to ata_dev_configure() Add @print_info argument to ata_dev_configure(). Details of configured device is printed only when @pinfo_info is non-zero. This patch also reorganizes device info printing for LBA case to simplify code (necessary as @print_info adds extra nesting around it). Signed-off-by: Tejun Heo Signed-off-by: Jeff Garzik --- drivers/scsi/libata-core.c | 54 +++++++++++++++++++++++++++------------------- 1 file changed, 32 insertions(+), 22 deletions(-) (limited to 'drivers/scsi') diff --git a/drivers/scsi/libata-core.c b/drivers/scsi/libata-core.c index 59828490a750..d65aa86ddbb2 100644 --- a/drivers/scsi/libata-core.c +++ b/drivers/scsi/libata-core.c @@ -1063,6 +1063,7 @@ static inline u8 ata_dev_knobble(const struct ata_port *ap, * ata_dev_configure - Configure the specified ATA/ATAPI device * @ap: Port on which target device resides * @dev: Target device to configure + * @print_info: Enable device info printout * * Configure @dev according to @dev->id. Generic and low-level * driver specific fixups are also applied. @@ -1073,7 +1074,8 @@ static inline u8 ata_dev_knobble(const struct ata_port *ap, * RETURNS: * 0 on success, -errno otherwise */ -static int ata_dev_configure(struct ata_port *ap, struct ata_device *dev) +static int ata_dev_configure(struct ata_port *ap, struct ata_device *dev, + int print_info) { unsigned long xfer_modes; int i, rc; @@ -1120,18 +1122,24 @@ static int ata_dev_configure(struct ata_port *ap, struct ata_device *dev) dev->n_sectors = ata_id_n_sectors(dev->id); if (ata_id_has_lba(dev->id)) { - dev->flags |= ATA_DFLAG_LBA; + const char *lba_desc; - if (ata_id_has_lba48(dev->id)) + lba_desc = "LBA"; + dev->flags |= ATA_DFLAG_LBA; + if (ata_id_has_lba48(dev->id)) { dev->flags |= ATA_DFLAG_LBA48; + lba_desc = "LBA48"; + } /* print device info to dmesg */ - printk(KERN_INFO "ata%u: dev %u ATA-%d, max %s, %Lu sectors:%s\n", - ap->id, dev->devno, - ata_id_major_version(dev->id), - ata_mode_string(xfer_modes), - (unsigned long long)dev->n_sectors, - dev->flags & ATA_DFLAG_LBA48 ? " LBA48" : " LBA"); + if (print_info) + printk(KERN_INFO "ata%u: dev %u ATA-%d, " + "max %s, %Lu sectors: %s\n", + ap->id, dev->devno, + ata_id_major_version(dev->id), + ata_mode_string(xfer_modes), + (unsigned long long)dev->n_sectors, + lba_desc); } else { /* CHS */ @@ -1148,13 +1156,14 @@ static int ata_dev_configure(struct ata_port *ap, struct ata_device *dev) } /* print device info to dmesg */ - printk(KERN_INFO "ata%u: dev %u ATA-%d, max %s, %Lu sectors: CHS %d/%d/%d\n", - ap->id, dev->devno, - ata_id_major_version(dev->id), - ata_mode_string(xfer_modes), - (unsigned long long)dev->n_sectors, - (int)dev->cylinders, (int)dev->heads, (int)dev->sectors); - + if (print_info) + printk(KERN_INFO "ata%u: dev %u ATA-%d, " + "max %s, %Lu sectors: CHS %u/%u/%u\n", + ap->id, dev->devno, + ata_id_major_version(dev->id), + ata_mode_string(xfer_modes), + (unsigned long long)dev->n_sectors, + dev->cylinders, dev->heads, dev->sectors); } dev->cdb_len = 16; @@ -1171,9 +1180,9 @@ static int ata_dev_configure(struct ata_port *ap, struct ata_device *dev) dev->cdb_len = (unsigned int) rc; /* print device info to dmesg */ - printk(KERN_INFO "ata%u: dev %u ATAPI, max %s\n", - ap->id, dev->devno, - ata_mode_string(xfer_modes)); + if (print_info) + printk(KERN_INFO "ata%u: dev %u ATAPI, max %s\n", + ap->id, dev->devno, ata_mode_string(xfer_modes)); } ap->host->max_cmd_len = 0; @@ -1184,8 +1193,9 @@ static int ata_dev_configure(struct ata_port *ap, struct ata_device *dev) /* limit bridge transfers to udma5, 200 sectors */ if (ata_dev_knobble(ap, dev)) { - printk(KERN_INFO "ata%u(%u): applying bridge limits\n", - ap->id, dev->devno); + if (print_info) + printk(KERN_INFO "ata%u(%u): applying bridge limits\n", + ap->id, dev->devno); ap->udma_mask &= ATA_UDMA5; dev->max_sectors = ATA_MAX_SECTORS; } @@ -1263,7 +1273,7 @@ static int ata_bus_probe(struct ata_port *ap) continue; } - if (ata_dev_configure(ap, dev)) { + if (ata_dev_configure(ap, dev, 1)) { dev->class++; /* disable device */ continue; } -- cgit v1.2.1 From 623a3128aa2b86caa8e06e762e9e444177e4fa47 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Sun, 5 Mar 2006 17:55:58 +0900 Subject: [PATCH] libata: implement ata_dev_revalidate() ata_dev_revalidate() re-reads IDENTIFY PAGE of the given device and makes sure it's the same device as the configured one. Once it's verified that it's the same device, @dev is configured according to newly read IDENTIFY PAGE. Note that revalidation currently doesn't invoke transfer mode reconfiguration. Criteria for 'same device' * same class (of course) * same model string * same serial string * if ATA, same n_sectors (to catch geometry parameter changes) Signed-off-by: Tejun Heo Signed-off-by: Jeff Garzik --- drivers/scsi/libata-core.c | 115 +++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 115 insertions(+) (limited to 'drivers/scsi') diff --git a/drivers/scsi/libata-core.c b/drivers/scsi/libata-core.c index d65aa86ddbb2..5d0adfa4610a 100644 --- a/drivers/scsi/libata-core.c +++ b/drivers/scsi/libata-core.c @@ -2345,6 +2345,120 @@ int ata_drive_probe_reset(struct ata_port *ap, ata_probeinit_fn_t probeinit, return rc; } +/** + * ata_dev_same_device - Determine whether new ID matches configured device + * @ap: port on which the device to compare against resides + * @dev: device to compare against + * @new_class: class of the new device + * @new_id: IDENTIFY page of the new device + * + * Compare @new_class and @new_id against @dev and determine + * whether @dev is the device indicated by @new_class and + * @new_id. + * + * LOCKING: + * None. + * + * RETURNS: + * 1 if @dev matches @new_class and @new_id, 0 otherwise. + */ +static int ata_dev_same_device(struct ata_port *ap, struct ata_device *dev, + unsigned int new_class, const u16 *new_id) +{ + const u16 *old_id = dev->id; + unsigned char model[2][41], serial[2][21]; + u64 new_n_sectors; + + if (dev->class != new_class) { + printk(KERN_INFO + "ata%u: dev %u class mismatch %d != %d\n", + ap->id, dev->devno, dev->class, new_class); + return 0; + } + + ata_id_c_string(old_id, model[0], ATA_ID_PROD_OFS, sizeof(model[0])); + ata_id_c_string(new_id, model[1], ATA_ID_PROD_OFS, sizeof(model[1])); + ata_id_c_string(old_id, serial[0], ATA_ID_SERNO_OFS, sizeof(serial[0])); + ata_id_c_string(new_id, serial[1], ATA_ID_SERNO_OFS, sizeof(serial[1])); + new_n_sectors = ata_id_n_sectors(new_id); + + if (strcmp(model[0], model[1])) { + printk(KERN_INFO + "ata%u: dev %u model number mismatch '%s' != '%s'\n", + ap->id, dev->devno, model[0], model[1]); + return 0; + } + + if (strcmp(serial[0], serial[1])) { + printk(KERN_INFO + "ata%u: dev %u serial number mismatch '%s' != '%s'\n", + ap->id, dev->devno, serial[0], serial[1]); + return 0; + } + + if (dev->class == ATA_DEV_ATA && dev->n_sectors != new_n_sectors) { + printk(KERN_INFO + "ata%u: dev %u n_sectors mismatch %llu != %llu\n", + ap->id, dev->devno, (unsigned long long)dev->n_sectors, + (unsigned long long)new_n_sectors); + return 0; + } + + return 1; +} + +/** + * ata_dev_revalidate - Revalidate ATA device + * @ap: port on which the device to revalidate resides + * @dev: device to revalidate + * @post_reset: is this revalidation after reset? + * + * Re-read IDENTIFY page and make sure @dev is still attached to + * the port. + * + * LOCKING: + * Kernel thread context (may sleep) + * + * RETURNS: + * 0 on success, negative errno otherwise + */ +int ata_dev_revalidate(struct ata_port *ap, struct ata_device *dev, + int post_reset) +{ + unsigned int class; + u16 *id; + int rc; + + if (!ata_dev_present(dev)) + return -ENODEV; + + class = dev->class; + id = NULL; + + /* allocate & read ID data */ + rc = ata_dev_read_id(ap, dev, &class, post_reset, &id); + if (rc) + goto fail; + + /* is the device still there? */ + if (!ata_dev_same_device(ap, dev, class, id)) { + rc = -ENODEV; + goto fail; + } + + kfree(dev->id); + dev->id = id; + + /* configure device according to the new ID */ + return ata_dev_configure(ap, dev, 0); + + fail: + printk(KERN_ERR "ata%u: dev %u revalidation failed (errno=%d)\n", + ap->id, dev->devno, rc); + kfree(id); + return rc; +} + static void ata_pr_blacklisted(const struct ata_port *ap, const struct ata_device *dev) { @@ -4964,6 +5078,7 @@ EXPORT_SYMBOL_GPL(sata_std_hardreset); EXPORT_SYMBOL_GPL(ata_std_postreset); EXPORT_SYMBOL_GPL(ata_std_probe_reset); EXPORT_SYMBOL_GPL(ata_drive_probe_reset); +EXPORT_SYMBOL_GPL(ata_dev_revalidate); EXPORT_SYMBOL_GPL(ata_port_disable); EXPORT_SYMBOL_GPL(ata_ratelimit); EXPORT_SYMBOL_GPL(ata_busy_sleep); -- cgit v1.2.1 From 48a8a14ff1f13aa4dba3f6b4381b886727609db4 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Sun, 5 Mar 2006 17:55:58 +0900 Subject: [PATCH] libata: revalidate after transfer mode configuration Revalidate device after transfer mode configuration. This also makes dev->id up-to-date. Signed-off-by: Tejun Heo Signed-off-by: Jeff Garzik --- drivers/scsi/libata-core.c | 6 ++++++ 1 file changed, 6 insertions(+) (limited to 'drivers/scsi') diff --git a/drivers/scsi/libata-core.c b/drivers/scsi/libata-core.c index 5d0adfa4610a..5dbcf0cf4a10 100644 --- a/drivers/scsi/libata-core.c +++ b/drivers/scsi/libata-core.c @@ -1625,6 +1625,12 @@ static void ata_dev_set_mode(struct ata_port *ap, struct ata_device *dev) idx = ofs + dev->xfer_shift; WARN_ON(idx >= ARRAY_SIZE(xfer_mode_str)); + if (ata_dev_revalidate(ap, dev, 0)) { + printk(KERN_ERR "ata%u: failed to revalidate after set " + "xfermode, disabled\n", ap->id); + ata_port_disable(ap); + } + DPRINTK("idx=%d xfer_shift=%u, xfer_mode=0x%x, base=0x%x, offset=%d\n", idx, dev->xfer_shift, (int)dev->xfer_mode, (int)base, ofs); -- cgit v1.2.1 From fbfda6e71bbdd3b4d41a56c3f20f31762c455a5e Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Sun, 5 Mar 2006 23:03:42 +0900 Subject: [PATCH] sata_sil24: fix mwdma_mask setting mwdma_mask was not copied from port_info to probe_ent. Fix it. Signed-off-by: Tejun Heo Signed-off-by: Jeff Garzik --- drivers/scsi/sata_sil24.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers/scsi') diff --git a/drivers/scsi/sata_sil24.c b/drivers/scsi/sata_sil24.c index 5c5822e33a49..8fb62427be84 100644 --- a/drivers/scsi/sata_sil24.c +++ b/drivers/scsi/sata_sil24.c @@ -892,6 +892,7 @@ static int sil24_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) probe_ent->sht = pinfo->sht; probe_ent->host_flags = pinfo->host_flags; probe_ent->pio_mask = pinfo->pio_mask; + probe_ent->mwdma_mask = pinfo->mwdma_mask; probe_ent->udma_mask = pinfo->udma_mask; probe_ent->port_ops = pinfo->port_ops; probe_ent->n_ports = SIL24_FLAG2NPORTS(pinfo->host_flags); -- cgit v1.2.1 From ad139a2f56e5789aa8a9f74e3600a7f854a38de9 Mon Sep 17 00:00:00 2001 From: Andreas Herrmann Date: Thu, 9 Mar 2006 16:37:49 +0100 Subject: [SCSI] scsi_transport_fc: fix FC_HOST_NUM_ATTRS In the past I added an host attribute but unfortunately I forgot to increase FC_HOST_NUM_ATTRS. This is fixed with the patch. Otherwise an fibre channel lld might run into BUG_ON(count > FC_HOST_NUM_ATTRS); in fc_attach_transport(). Signed-off-by: Andreas Herrmann Signed-off-by: James Bottomley --- drivers/scsi/scsi_transport_fc.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/scsi') diff --git a/drivers/scsi/scsi_transport_fc.c b/drivers/scsi/scsi_transport_fc.c index 929032e370db..13ea64119b73 100644 --- a/drivers/scsi/scsi_transport_fc.c +++ b/drivers/scsi/scsi_transport_fc.c @@ -223,7 +223,7 @@ static void fc_rport_terminate(struct fc_rport *rport); */ #define FC_STARGET_NUM_ATTRS 3 #define FC_RPORT_NUM_ATTRS 9 -#define FC_HOST_NUM_ATTRS 16 +#define FC_HOST_NUM_ATTRS 17 struct fc_internal { struct scsi_transport_template t; -- cgit v1.2.1 From 86e45b6bd6900c4a0b3666fb18b46e215f775c4f Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Sun, 5 Mar 2006 15:29:09 +0900 Subject: [PATCH] libata: implement port_task Implement port_task. LLDD's can schedule a function to be executed with context after specified delay. libata core takes care of synchronization against EH. This is generalized form of pio_task and packet_task which are tied to PIO hsm implementation. Signed-off-by: Tejun Heo Signed-off-by: Jeff Garzik --- drivers/scsi/libata-core.c | 77 ++++++++++++++++++++++++++++++++++++++++++++++ drivers/scsi/libata-scsi.c | 2 ++ drivers/scsi/libata.h | 1 + 3 files changed, 80 insertions(+) (limited to 'drivers/scsi') diff --git a/drivers/scsi/libata-core.c b/drivers/scsi/libata-core.c index 5dbcf0cf4a10..d59d462130c1 100644 --- a/drivers/scsi/libata-core.c +++ b/drivers/scsi/libata-core.c @@ -721,6 +721,81 @@ static unsigned int ata_pio_modes(const struct ata_device *adev) timing API will get this right anyway */ } +/** + * ata_port_queue_task - Queue port_task + * @ap: The ata_port to queue port_task for + * + * Schedule @fn(@data) for execution after @delay jiffies using + * port_task. There is one port_task per port and it's the + * user(low level driver)'s responsibility to make sure that only + * one task is active at any given time. + * + * libata core layer takes care of synchronization between + * port_task and EH. ata_port_queue_task() may be ignored for EH + * synchronization. + * + * LOCKING: + * Inherited from caller. + */ +void ata_port_queue_task(struct ata_port *ap, void (*fn)(void *), void *data, + unsigned long delay) +{ + int rc; + + if (ap->flags & ATA_FLAG_FLUSH_PIO_TASK) + return; + + PREPARE_WORK(&ap->port_task, fn, data); + + if (!delay) + rc = queue_work(ata_wq, &ap->port_task); + else + rc = queue_delayed_work(ata_wq, &ap->port_task, delay); + + /* rc == 0 means that another user is using port task */ + WARN_ON(rc == 0); +} + +/** + * ata_port_flush_task - Flush port_task + * @ap: The ata_port to flush port_task for + * + * After this function completes, port_task is guranteed not to + * be running or scheduled. + * + * LOCKING: + * Kernel thread context (may sleep) + */ +void ata_port_flush_task(struct ata_port *ap) +{ + unsigned long flags; + + DPRINTK("ENTER\n"); + + spin_lock_irqsave(&ap->host_set->lock, flags); + ap->flags |= ATA_FLAG_FLUSH_PIO_TASK; + spin_unlock_irqrestore(&ap->host_set->lock, flags); + + DPRINTK("flush #1\n"); + flush_workqueue(ata_wq); + + /* + * At this point, if a task is running, it's guaranteed to see + * the FLUSH flag; thus, it will never queue pio tasks again. + * Cancel and flush. + */ + if (!cancel_delayed_work(&ap->port_task)) { + DPRINTK("flush #2\n"); + flush_workqueue(ata_wq); + } + + spin_lock_irqsave(&ap->host_set->lock, flags); + ap->flags &= ~ATA_FLAG_FLUSH_PIO_TASK; + spin_unlock_irqrestore(&ap->host_set->lock, flags); + + DPRINTK("EXIT\n"); +} + static inline void ata_queue_packet_task(struct ata_port *ap) { @@ -4617,6 +4692,7 @@ static void ata_host_init(struct ata_port *ap, struct Scsi_Host *host, ap->active_tag = ATA_TAG_POISON; ap->last_ctl = 0xFF; + INIT_WORK(&ap->port_task, NULL, NULL); INIT_WORK(&ap->packet_task, atapi_packet_task, ap); INIT_WORK(&ap->pio_task, ata_pio_task, ap); INIT_LIST_HEAD(&ap->eh_done_q); @@ -5088,6 +5164,7 @@ EXPORT_SYMBOL_GPL(ata_dev_revalidate); EXPORT_SYMBOL_GPL(ata_port_disable); EXPORT_SYMBOL_GPL(ata_ratelimit); EXPORT_SYMBOL_GPL(ata_busy_sleep); +EXPORT_SYMBOL_GPL(ata_port_queue_task); EXPORT_SYMBOL_GPL(ata_scsi_ioctl); EXPORT_SYMBOL_GPL(ata_scsi_queuecmd); EXPORT_SYMBOL_GPL(ata_scsi_timed_out); diff --git a/drivers/scsi/libata-scsi.c b/drivers/scsi/libata-scsi.c index d0bd94abb413..ccedb4536977 100644 --- a/drivers/scsi/libata-scsi.c +++ b/drivers/scsi/libata-scsi.c @@ -785,6 +785,8 @@ int ata_scsi_error(struct Scsi_Host *host) WARN_ON(ata_qc_from_tag(ap, ap->active_tag) == NULL); spin_unlock_irqrestore(&ap->host_set->lock, flags); + ata_port_flush_task(ap); + ap->ops->eng_timeout(ap); WARN_ON(host->host_failed || !list_empty(&host->eh_cmd_q)); diff --git a/drivers/scsi/libata.h b/drivers/scsi/libata.h index d822eba05f3c..f4c48c91b63d 100644 --- a/drivers/scsi/libata.h +++ b/drivers/scsi/libata.h @@ -45,6 +45,7 @@ extern int libata_fua; extern struct ata_queued_cmd *ata_qc_new_init(struct ata_port *ap, struct ata_device *dev); extern int ata_rwcmd_protocol(struct ata_queued_cmd *qc); +extern void ata_port_flush_task(struct ata_port *ap); extern void ata_qc_free(struct ata_queued_cmd *qc); extern unsigned int ata_qc_issue(struct ata_queued_cmd *qc); extern int ata_check_atapi_dma(struct ata_queued_cmd *qc); -- cgit v1.2.1 From 8061f5f0a04cfd2bc7aa273596ad3fcd426f8eea Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Sun, 5 Mar 2006 15:29:09 +0900 Subject: [PATCH] libata: convert pio_task and packet_task to port_task Make pio_task and atapi_packet_task use port_task. atapi_packet_task() is moved upward such that it's right after ata_pio_task(). This position is more natural and makes adding prototype for ata_qc_issue_prot() unnecessary. Signed-off-by: Tejun Heo Signed-off-by: Jeff Garzik --- drivers/scsi/libata-core.c | 154 ++++++++++++++++++++++----------------------- 1 file changed, 77 insertions(+), 77 deletions(-) (limited to 'drivers/scsi') diff --git a/drivers/scsi/libata-core.c b/drivers/scsi/libata-core.c index d59d462130c1..16a108d2f9a9 100644 --- a/drivers/scsi/libata-core.c +++ b/drivers/scsi/libata-core.c @@ -3709,11 +3709,83 @@ fsm_start: } if (timeout) - ata_queue_delayed_pio_task(ap, timeout); + ata_port_queue_task(ap, ata_pio_task, ap, timeout); else if (!qc_completed) goto fsm_start; } +/** + * atapi_packet_task - Write CDB bytes to hardware + * @_data: Port to which ATAPI device is attached. + * + * When device has indicated its readiness to accept + * a CDB, this function is called. Send the CDB. + * If DMA is to be performed, exit immediately. + * Otherwise, we are in polling mode, so poll + * status under operation succeeds or fails. + * + * LOCKING: + * Kernel thread context (may sleep) + */ + +static void atapi_packet_task(void *_data) +{ + struct ata_port *ap = _data; + struct ata_queued_cmd *qc; + u8 status; + + qc = ata_qc_from_tag(ap, ap->active_tag); + WARN_ON(qc == NULL); + WARN_ON(!(qc->flags & ATA_QCFLAG_ACTIVE)); + + /* sleep-wait for BSY to clear */ + DPRINTK("busy wait\n"); + if (ata_busy_sleep(ap, ATA_TMOUT_CDB_QUICK, ATA_TMOUT_CDB)) { + qc->err_mask |= AC_ERR_TIMEOUT; + goto err_out; + } + + /* make sure DRQ is set */ + status = ata_chk_status(ap); + if ((status & (ATA_BUSY | ATA_DRQ)) != ATA_DRQ) { + qc->err_mask |= AC_ERR_HSM; + goto err_out; + } + + /* send SCSI cdb */ + DPRINTK("send cdb\n"); + WARN_ON(qc->dev->cdb_len < 12); + + if (qc->tf.protocol == ATA_PROT_ATAPI_DMA || + qc->tf.protocol == ATA_PROT_ATAPI_NODATA) { + unsigned long flags; + + /* Once we're done issuing command and kicking bmdma, + * irq handler takes over. To not lose irq, we need + * to clear NOINTR flag before sending cdb, but + * interrupt handler shouldn't be invoked before we're + * finished. Hence, the following locking. + */ + spin_lock_irqsave(&ap->host_set->lock, flags); + ap->flags &= ~ATA_FLAG_NOINTR; + ata_data_xfer(ap, qc->cdb, qc->dev->cdb_len, 1); + if (qc->tf.protocol == ATA_PROT_ATAPI_DMA) + ap->ops->bmdma_start(qc); /* initiate bmdma */ + spin_unlock_irqrestore(&ap->host_set->lock, flags); + } else { + ata_data_xfer(ap, qc->cdb, qc->dev->cdb_len, 1); + + /* PIO commands are handled by polling */ + ap->hsm_task_state = HSM_ST; + ata_port_queue_task(ap, ata_pio_task, ap, 0); + } + + return; + +err_out: + ata_poll_qc_complete(qc); +} + /** * ata_qc_timeout - Handle timeout of queued command * @qc: Command that timed out @@ -4013,26 +4085,26 @@ unsigned int ata_qc_issue_prot(struct ata_queued_cmd *qc) ata_qc_set_polling(qc); ata_tf_to_host(ap, &qc->tf); ap->hsm_task_state = HSM_ST; - ata_queue_pio_task(ap); + ata_port_queue_task(ap, ata_pio_task, ap, 0); break; case ATA_PROT_ATAPI: ata_qc_set_polling(qc); ata_tf_to_host(ap, &qc->tf); - ata_queue_packet_task(ap); + ata_port_queue_task(ap, atapi_packet_task, ap, 0); break; case ATA_PROT_ATAPI_NODATA: ap->flags |= ATA_FLAG_NOINTR; ata_tf_to_host(ap, &qc->tf); - ata_queue_packet_task(ap); + ata_port_queue_task(ap, atapi_packet_task, ap, 0); break; case ATA_PROT_ATAPI_DMA: ap->flags |= ATA_FLAG_NOINTR; ap->ops->tf_load(ap, &qc->tf); /* load tf registers */ ap->ops->bmdma_setup(qc); /* set up bmdma */ - ata_queue_packet_task(ap); + ata_port_queue_task(ap, atapi_packet_task, ap, 0); break; default: @@ -4400,78 +4472,6 @@ irqreturn_t ata_interrupt (int irq, void *dev_instance, struct pt_regs *regs) return IRQ_RETVAL(handled); } -/** - * atapi_packet_task - Write CDB bytes to hardware - * @_data: Port to which ATAPI device is attached. - * - * When device has indicated its readiness to accept - * a CDB, this function is called. Send the CDB. - * If DMA is to be performed, exit immediately. - * Otherwise, we are in polling mode, so poll - * status under operation succeeds or fails. - * - * LOCKING: - * Kernel thread context (may sleep) - */ - -static void atapi_packet_task(void *_data) -{ - struct ata_port *ap = _data; - struct ata_queued_cmd *qc; - u8 status; - - qc = ata_qc_from_tag(ap, ap->active_tag); - WARN_ON(qc == NULL); - WARN_ON(!(qc->flags & ATA_QCFLAG_ACTIVE)); - - /* sleep-wait for BSY to clear */ - DPRINTK("busy wait\n"); - if (ata_busy_sleep(ap, ATA_TMOUT_CDB_QUICK, ATA_TMOUT_CDB)) { - qc->err_mask |= AC_ERR_TIMEOUT; - goto err_out; - } - - /* make sure DRQ is set */ - status = ata_chk_status(ap); - if ((status & (ATA_BUSY | ATA_DRQ)) != ATA_DRQ) { - qc->err_mask |= AC_ERR_HSM; - goto err_out; - } - - /* send SCSI cdb */ - DPRINTK("send cdb\n"); - WARN_ON(qc->dev->cdb_len < 12); - - if (qc->tf.protocol == ATA_PROT_ATAPI_DMA || - qc->tf.protocol == ATA_PROT_ATAPI_NODATA) { - unsigned long flags; - - /* Once we're done issuing command and kicking bmdma, - * irq handler takes over. To not lose irq, we need - * to clear NOINTR flag before sending cdb, but - * interrupt handler shouldn't be invoked before we're - * finished. Hence, the following locking. - */ - spin_lock_irqsave(&ap->host_set->lock, flags); - ap->flags &= ~ATA_FLAG_NOINTR; - ata_data_xfer(ap, qc->cdb, qc->dev->cdb_len, 1); - if (qc->tf.protocol == ATA_PROT_ATAPI_DMA) - ap->ops->bmdma_start(qc); /* initiate bmdma */ - spin_unlock_irqrestore(&ap->host_set->lock, flags); - } else { - ata_data_xfer(ap, qc->cdb, qc->dev->cdb_len, 1); - - /* PIO commands are handled by polling */ - ap->hsm_task_state = HSM_ST; - ata_queue_pio_task(ap); - } - - return; - -err_out: - ata_poll_qc_complete(qc); -} - /* * Execute a 'simple' command, that only consists of the opcode 'cmd' itself, -- cgit v1.2.1 From 507ceda00302c071029277652d9faa5a0a55419a Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Sun, 5 Mar 2006 15:29:09 +0900 Subject: [PATCH] libata: kill unused pio_task and packet_task Kill unused pio_task and packet_task. Signed-off-by: Tejun Heo Signed-off-by: Jeff Garzik --- drivers/scsi/libata-core.c | 68 ---------------------------------------------- 1 file changed, 68 deletions(-) (limited to 'drivers/scsi') diff --git a/drivers/scsi/libata-core.c b/drivers/scsi/libata-core.c index 16a108d2f9a9..2974438d3bb7 100644 --- a/drivers/scsi/libata-core.c +++ b/drivers/scsi/libata-core.c @@ -796,71 +796,6 @@ void ata_port_flush_task(struct ata_port *ap) DPRINTK("EXIT\n"); } -static inline void -ata_queue_packet_task(struct ata_port *ap) -{ - if (!(ap->flags & ATA_FLAG_FLUSH_PIO_TASK)) - queue_work(ata_wq, &ap->packet_task); -} - -static inline void -ata_queue_pio_task(struct ata_port *ap) -{ - if (!(ap->flags & ATA_FLAG_FLUSH_PIO_TASK)) - queue_work(ata_wq, &ap->pio_task); -} - -static inline void -ata_queue_delayed_pio_task(struct ata_port *ap, unsigned long delay) -{ - if (!(ap->flags & ATA_FLAG_FLUSH_PIO_TASK)) - queue_delayed_work(ata_wq, &ap->pio_task, delay); -} - -/** - * ata_flush_pio_tasks - Flush pio_task and packet_task - * @ap: the target ata_port - * - * After this function completes, pio_task and packet_task are - * guranteed not to be running or scheduled. - * - * LOCKING: - * Kernel thread context (may sleep) - */ - -static void ata_flush_pio_tasks(struct ata_port *ap) -{ - int tmp = 0; - unsigned long flags; - - DPRINTK("ENTER\n"); - - spin_lock_irqsave(&ap->host_set->lock, flags); - ap->flags |= ATA_FLAG_FLUSH_PIO_TASK; - spin_unlock_irqrestore(&ap->host_set->lock, flags); - - DPRINTK("flush #1\n"); - flush_workqueue(ata_wq); - - /* - * At this point, if a task is running, it's guaranteed to see - * the FLUSH flag; thus, it will never queue pio tasks again. - * Cancel and flush. - */ - tmp |= cancel_delayed_work(&ap->pio_task); - tmp |= cancel_delayed_work(&ap->packet_task); - if (!tmp) { - DPRINTK("flush #2\n"); - flush_workqueue(ata_wq); - } - - spin_lock_irqsave(&ap->host_set->lock, flags); - ap->flags &= ~ATA_FLAG_FLUSH_PIO_TASK; - spin_unlock_irqrestore(&ap->host_set->lock, flags); - - DPRINTK("EXIT\n"); -} - void ata_qc_complete_internal(struct ata_queued_cmd *qc) { struct completion *waiting = qc->private_data; @@ -3814,7 +3749,6 @@ static void ata_qc_timeout(struct ata_queued_cmd *qc) DPRINTK("ENTER\n"); - ata_flush_pio_tasks(ap); ap->hsm_task_state = HSM_ST_IDLE; spin_lock_irqsave(&host_set->lock, flags); @@ -4693,8 +4627,6 @@ static void ata_host_init(struct ata_port *ap, struct Scsi_Host *host, ap->last_ctl = 0xFF; INIT_WORK(&ap->port_task, NULL, NULL); - INIT_WORK(&ap->packet_task, atapi_packet_task, ap); - INIT_WORK(&ap->pio_task, ata_pio_task, ap); INIT_LIST_HEAD(&ap->eh_done_q); for (i = 0; i < ATA_MAX_DEVICES; i++) -- cgit v1.2.1 From 2e755f68ee23b03484fde18d978f910cc5479cb8 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Sun, 5 Mar 2006 15:29:09 +0900 Subject: [PATCH] libata: rename ATA_FLAG_FLUSH_PIO_TASK to ATA_FLAG_FLUSH_PORT_TASK Rename ATA_FLAG_FLUSH_PIO_TASK to ATA_FLAG_FLUSH_PORT_TASK. Signed-off-by: Tejun Heo Signed-off-by: Jeff Garzik --- drivers/scsi/libata-core.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'drivers/scsi') diff --git a/drivers/scsi/libata-core.c b/drivers/scsi/libata-core.c index 2974438d3bb7..6d8aa86f2f6b 100644 --- a/drivers/scsi/libata-core.c +++ b/drivers/scsi/libata-core.c @@ -742,7 +742,7 @@ void ata_port_queue_task(struct ata_port *ap, void (*fn)(void *), void *data, { int rc; - if (ap->flags & ATA_FLAG_FLUSH_PIO_TASK) + if (ap->flags & ATA_FLAG_FLUSH_PORT_TASK) return; PREPARE_WORK(&ap->port_task, fn, data); @@ -773,7 +773,7 @@ void ata_port_flush_task(struct ata_port *ap) DPRINTK("ENTER\n"); spin_lock_irqsave(&ap->host_set->lock, flags); - ap->flags |= ATA_FLAG_FLUSH_PIO_TASK; + ap->flags |= ATA_FLAG_FLUSH_PORT_TASK; spin_unlock_irqrestore(&ap->host_set->lock, flags); DPRINTK("flush #1\n"); @@ -790,7 +790,7 @@ void ata_port_flush_task(struct ata_port *ap) } spin_lock_irqsave(&ap->host_set->lock, flags); - ap->flags &= ~ATA_FLAG_FLUSH_PIO_TASK; + ap->flags &= ~ATA_FLAG_FLUSH_PORT_TASK; spin_unlock_irqrestore(&ap->host_set->lock, flags); DPRINTK("EXIT\n"); -- cgit v1.2.1 From 1da7b0d01b20bf21f3263d8d2f17fa49a214d773 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Mon, 6 Mar 2006 04:31:56 +0900 Subject: [PATCH] libata: improve xfer mask constants and update ata_mode_string() Add ATA_BITS_*, ATA_MASK_* macros and reorder xfer_mask fields such that higher transfer mode is placed at higher order bit. As thie reordering breaks ata_mode_string(), this patch also rewrites ata_mode_string(). Signed-off-by: Tejun Heo Signed-off-by: Jeff Garzik --- drivers/scsi/libata-core.c | 44 +++++++++++++++++--------------------------- 1 file changed, 17 insertions(+), 27 deletions(-) (limited to 'drivers/scsi') diff --git a/drivers/scsi/libata-core.c b/drivers/scsi/libata-core.c index 6d8aa86f2f6b..18418c82d6f6 100644 --- a/drivers/scsi/libata-core.c +++ b/drivers/scsi/libata-core.c @@ -232,6 +232,14 @@ int ata_rwcmd_protocol(struct ata_queued_cmd *qc) } static const char * const xfer_mode_str[] = { + "PIO0", + "PIO1", + "PIO2", + "PIO3", + "PIO4", + "MWDMA0", + "MWDMA1", + "MWDMA2", "UDMA/16", "UDMA/25", "UDMA/33", @@ -240,49 +248,31 @@ static const char * const xfer_mode_str[] = { "UDMA/100", "UDMA/133", "UDMA7", - "MWDMA0", - "MWDMA1", - "MWDMA2", - "PIO0", - "PIO1", - "PIO2", - "PIO3", - "PIO4", }; /** - * ata_udma_string - convert UDMA bit offset to string - * @mask: mask of bits supported; only highest bit counts. + * ata_mode_string - convert xfer_mask to string + * @xfer_mask: mask of bits supported; only highest bit counts. * * Determine string which represents the highest speed - * (highest bit in @udma_mask). + * (highest bit in @modemask). * * LOCKING: * None. * * RETURNS: * Constant C string representing highest speed listed in - * @udma_mask, or the constant C string "". + * @mode_mask, or the constant C string "". */ -static const char *ata_mode_string(unsigned int mask) +static const char *ata_mode_string(unsigned int xfer_mask) { - int i; - - for (i = 7; i >= 0; i--) - if (mask & (1 << i)) - goto out; - for (i = ATA_SHIFT_MWDMA + 2; i >= ATA_SHIFT_MWDMA; i--) - if (mask & (1 << i)) - goto out; - for (i = ATA_SHIFT_PIO + 4; i >= ATA_SHIFT_PIO; i--) - if (mask & (1 << i)) - goto out; + int highbit; + highbit = fls(xfer_mask) - 1; + if (highbit >= 0 && highbit < ARRAY_SIZE(xfer_mode_str)) + return xfer_mode_str[highbit]; return ""; - -out: - return xfer_mode_str[i]; } /** -- cgit v1.2.1 From cb95d562e40140572efbca809f372e608aff7326 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Mon, 6 Mar 2006 04:31:56 +0900 Subject: [PATCH] libata: add xfer_mask handling functions Add ata_pack_xfermask(), ata_xfer_mask2mode(), ata_xfer_mode2mask(), ata_xfer_mode2shift() and ata_id_xfermask(). These functions will be used by following patches to simplify xfer_mask handling. Signed-off-by: Tejun Heo Signed-off-by: Jeff Garzik --- drivers/scsi/libata-core.c | 147 +++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 147 insertions(+) (limited to 'drivers/scsi') diff --git a/drivers/scsi/libata-core.c b/drivers/scsi/libata-core.c index 18418c82d6f6..9946618f1a35 100644 --- a/drivers/scsi/libata-core.c +++ b/drivers/scsi/libata-core.c @@ -231,6 +231,108 @@ int ata_rwcmd_protocol(struct ata_queued_cmd *qc) return -1; } +/** + * ata_pack_xfermask - Pack pio, mwdma and udma masks into xfer_mask + * @pio_mask: pio_mask + * @mwdma_mask: mwdma_mask + * @udma_mask: udma_mask + * + * Pack @pio_mask, @mwdma_mask and @udma_mask into a single + * unsigned int xfer_mask. + * + * LOCKING: + * None. + * + * RETURNS: + * Packed xfer_mask. + */ +static unsigned int ata_pack_xfermask(unsigned int pio_mask, + unsigned int mwdma_mask, + unsigned int udma_mask) +{ + return ((pio_mask << ATA_SHIFT_PIO) & ATA_MASK_PIO) | + ((mwdma_mask << ATA_SHIFT_MWDMA) & ATA_MASK_MWDMA) | + ((udma_mask << ATA_SHIFT_UDMA) & ATA_MASK_UDMA); +} + +static const struct ata_xfer_ent { + unsigned int shift, bits; + u8 base; +} ata_xfer_tbl[] = { + { ATA_SHIFT_PIO, ATA_BITS_PIO, XFER_PIO_0 }, + { ATA_SHIFT_MWDMA, ATA_BITS_MWDMA, XFER_MW_DMA_0 }, + { ATA_SHIFT_UDMA, ATA_BITS_UDMA, XFER_UDMA_0 }, + { -1, }, +}; + +/** + * ata_xfer_mask2mode - Find matching XFER_* for the given xfer_mask + * @xfer_mask: xfer_mask of interest + * + * Return matching XFER_* value for @xfer_mask. Only the highest + * bit of @xfer_mask is considered. + * + * LOCKING: + * None. + * + * RETURNS: + * Matching XFER_* value, 0 if no match found. + */ +static u8 ata_xfer_mask2mode(unsigned int xfer_mask) +{ + int highbit = fls(xfer_mask) - 1; + const struct ata_xfer_ent *ent; + + for (ent = ata_xfer_tbl; ent->shift >= 0; ent++) + if (highbit >= ent->shift && highbit < ent->shift + ent->bits) + return ent->base + highbit - ent->shift; + return 0; +} + +/** + * ata_xfer_mode2mask - Find matching xfer_mask for XFER_* + * @xfer_mode: XFER_* of interest + * + * Return matching xfer_mask for @xfer_mode. + * + * LOCKING: + * None. + * + * RETURNS: + * Matching xfer_mask, 0 if no match found. + */ +static unsigned int ata_xfer_mode2mask(u8 xfer_mode) +{ + const struct ata_xfer_ent *ent; + + for (ent = ata_xfer_tbl; ent->shift >= 0; ent++) + if (xfer_mode >= ent->base && xfer_mode < ent->base + ent->bits) + return 1 << (ent->shift + xfer_mode - ent->base); + return 0; +} + +/** + * ata_xfer_mode2shift - Find matching xfer_shift for XFER_* + * @xfer_mode: XFER_* of interest + * + * Return matching xfer_shift for @xfer_mode. + * + * LOCKING: + * None. + * + * RETURNS: + * Matching xfer_shift, -1 if no match found. + */ +static int ata_xfer_mode2shift(unsigned int xfer_mode) +{ + const struct ata_xfer_ent *ent; + + for (ent = ata_xfer_tbl; ent->shift >= 0; ent++) + if (xfer_mode >= ent->base && xfer_mode < ent->base + ent->bits) + return ent->shift; + return -1; +} + static const char * const xfer_mode_str[] = { "PIO0", "PIO1", @@ -682,6 +784,51 @@ static inline void ata_dump_id(const u16 *id) id[93]); } +/** + * ata_id_xfermask - Compute xfermask from the given IDENTIFY data + * @id: IDENTIFY data to compute xfer mask from + * + * Compute the xfermask for this device. This is not as trivial + * as it seems if we must consider early devices correctly. + * + * FIXME: pre IDE drive timing (do we care ?). + * + * LOCKING: + * None. + * + * RETURNS: + * Computed xfermask + */ +static unsigned int ata_id_xfermask(const u16 *id) +{ + unsigned int pio_mask, mwdma_mask, udma_mask; + + /* Usual case. Word 53 indicates word 64 is valid */ + if (id[ATA_ID_FIELD_VALID] & (1 << 1)) { + pio_mask = id[ATA_ID_PIO_MODES] & 0x03; + pio_mask <<= 3; + pio_mask |= 0x7; + } else { + /* If word 64 isn't valid then Word 51 high byte holds + * the PIO timing number for the maximum. Turn it into + * a mask. + */ + pio_mask = (2 << (id[ATA_ID_OLD_PIO_MODES] & 0xFF)) - 1 ; + + /* But wait.. there's more. Design your standards by + * committee and you too can get a free iordy field to + * process. However its the speeds not the modes that + * are supported... Note drivers using the timing API + * will get this right anyway + */ + } + + mwdma_mask = id[ATA_ID_MWDMA_MODES] & 0x07; + udma_mask = id[ATA_ID_UDMA_MODES] & 0xff; + + return ata_pack_xfermask(pio_mask, mwdma_mask, udma_mask); +} + /* * Compute the PIO modes available for this device. This is not as * trivial as it seems if we must consider early devices correctly. -- cgit v1.2.1 From ff8854b2719b9d26f5d3e84db4f66eb7e35e4ed9 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Mon, 6 Mar 2006 04:31:56 +0900 Subject: [PATCH] libata: use ata_id_xfermask() in ata_dev_configure() Replace quick & dirty max transfer mode determination in ata_dev_configure() with ata_id_xfermask(). While at it, rename xfer_modes variable to xfer_mask and make it unsigned int for consistency. Signed-off-by: Tejun Heo Signed-off-by: Jeff Garzik --- drivers/scsi/libata-core.c | 16 ++++++---------- 1 file changed, 6 insertions(+), 10 deletions(-) (limited to 'drivers/scsi') diff --git a/drivers/scsi/libata-core.c b/drivers/scsi/libata-core.c index 9946618f1a35..84a8550c56a4 100644 --- a/drivers/scsi/libata-core.c +++ b/drivers/scsi/libata-core.c @@ -1224,7 +1224,7 @@ static inline u8 ata_dev_knobble(const struct ata_port *ap, static int ata_dev_configure(struct ata_port *ap, struct ata_device *dev, int print_info) { - unsigned long xfer_modes; + unsigned int xfer_mask; int i, rc; if (!ata_dev_present(dev)) { @@ -1255,12 +1255,8 @@ static int ata_dev_configure(struct ata_port *ap, struct ata_device *dev, goto err_out_nosup; } - /* quick-n-dirty find max transfer mode; for printk only */ - xfer_modes = dev->id[ATA_ID_UDMA_MODES]; - if (!xfer_modes) - xfer_modes = (dev->id[ATA_ID_MWDMA_MODES]) << ATA_SHIFT_MWDMA; - if (!xfer_modes) - xfer_modes = ata_pio_modes(dev); + /* find max transfer mode; for printk only */ + xfer_mask = ata_id_xfermask(dev->id); ata_dump_id(dev->id); @@ -1284,7 +1280,7 @@ static int ata_dev_configure(struct ata_port *ap, struct ata_device *dev, "max %s, %Lu sectors: %s\n", ap->id, dev->devno, ata_id_major_version(dev->id), - ata_mode_string(xfer_modes), + ata_mode_string(xfer_mask), (unsigned long long)dev->n_sectors, lba_desc); } else { @@ -1308,7 +1304,7 @@ static int ata_dev_configure(struct ata_port *ap, struct ata_device *dev, "max %s, %Lu sectors: CHS %u/%u/%u\n", ap->id, dev->devno, ata_id_major_version(dev->id), - ata_mode_string(xfer_modes), + ata_mode_string(xfer_mask), (unsigned long long)dev->n_sectors, dev->cylinders, dev->heads, dev->sectors); } @@ -1329,7 +1325,7 @@ static int ata_dev_configure(struct ata_port *ap, struct ata_device *dev, /* print device info to dmesg */ if (print_info) printk(KERN_INFO "ata%u: dev %u ATAPI, max %s\n", - ap->id, dev->devno, ata_mode_string(xfer_modes)); + ap->id, dev->devno, ata_mode_string(xfer_mask)); } ap->host->max_cmd_len = 0; -- cgit v1.2.1 From 23e71c3d3e88b9f554ecd47d6f9aec76e89e2e6d Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Mon, 6 Mar 2006 04:31:57 +0900 Subject: [PATCH] libata: use xfer_mask helpers in ata_dev_set_mode() Rewrite hardcoded xfer_mode string determination in ata_dev_set_mode() using xfer_mask helpers. Signed-off-by: Tejun Heo Signed-off-by: Jeff Garzik --- drivers/scsi/libata-core.c | 15 ++++----------- 1 file changed, 4 insertions(+), 11 deletions(-) (limited to 'drivers/scsi') diff --git a/drivers/scsi/libata-core.c b/drivers/scsi/libata-core.c index 84a8550c56a4..88495127efb2 100644 --- a/drivers/scsi/libata-core.c +++ b/drivers/scsi/libata-core.c @@ -1752,9 +1752,6 @@ static u8 base_from_shift(unsigned int shift) static void ata_dev_set_mode(struct ata_port *ap, struct ata_device *dev) { - int ofs, idx; - u8 base; - if (!ata_dev_present(dev) || (ap->flags & ATA_FLAG_PORT_DISABLED)) return; @@ -1763,22 +1760,18 @@ static void ata_dev_set_mode(struct ata_port *ap, struct ata_device *dev) ata_dev_set_xfermode(ap, dev); - base = base_from_shift(dev->xfer_shift); - ofs = dev->xfer_mode - base; - idx = ofs + dev->xfer_shift; - WARN_ON(idx >= ARRAY_SIZE(xfer_mode_str)); - if (ata_dev_revalidate(ap, dev, 0)) { printk(KERN_ERR "ata%u: failed to revalidate after set " "xfermode, disabled\n", ap->id); ata_port_disable(ap); } - DPRINTK("idx=%d xfer_shift=%u, xfer_mode=0x%x, base=0x%x, offset=%d\n", - idx, dev->xfer_shift, (int)dev->xfer_mode, (int)base, ofs); + DPRINTK("xfer_shift=%u, xfer_mode=0x%x\n", + dev->xfer_shift, (int)dev->xfer_mode); printk(KERN_INFO "ata%u: dev %u configured for %s\n", - ap->id, dev->devno, xfer_mode_str[idx]); + ap->id, dev->devno, + ata_mode_string(ata_xfer_mode2mask(dev->xfer_mode))); } static int ata_host_set_pio(struct ata_port *ap) -- cgit v1.2.1 From a6d5a51cf1bf5d83ddd2e06fd372a79b395fb393 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Mon, 6 Mar 2006 04:31:57 +0900 Subject: [PATCH] libata: reimplement ata_set_mode() using xfer_mask helpers Use xfer_mask helpers to determine transfer mode. This rewrite also makes transfer mode determination done before any actual configuration. This patch doesn't result in any functional changes. Signed-off-by: Tejun Heo Signed-off-by: Jeff Garzik --- drivers/scsi/libata-core.c | 233 +++++++++++++++------------------------------ 1 file changed, 79 insertions(+), 154 deletions(-) (limited to 'drivers/scsi') diff --git a/drivers/scsi/libata-core.c b/drivers/scsi/libata-core.c index 88495127efb2..d211f0b1d721 100644 --- a/drivers/scsi/libata-core.c +++ b/drivers/scsi/libata-core.c @@ -65,11 +65,9 @@ static unsigned int ata_dev_init_params(struct ata_port *ap, struct ata_device *dev); static void ata_set_mode(struct ata_port *ap); static void ata_dev_set_xfermode(struct ata_port *ap, struct ata_device *dev); -static unsigned int ata_get_mode_mask(const struct ata_port *ap, int shift); +static unsigned int ata_dev_xfermask(struct ata_port *ap, + struct ata_device *dev); static int fgb(u32 bitmap); -static int ata_choose_xfer_mode(const struct ata_port *ap, - u8 *xfer_mode_out, - unsigned int *xfer_shift_out); static unsigned int ata_unique_id = 1; static struct workqueue_struct *ata_wq; @@ -1776,51 +1774,42 @@ static void ata_dev_set_mode(struct ata_port *ap, struct ata_device *dev) static int ata_host_set_pio(struct ata_port *ap) { - unsigned int mask; - int x, i; - u8 base, xfer_mode; - - mask = ata_get_mode_mask(ap, ATA_SHIFT_PIO); - x = fgb(mask); - if (x < 0) { - printk(KERN_WARNING "ata%u: no PIO support\n", ap->id); - return -1; - } - - base = base_from_shift(ATA_SHIFT_PIO); - xfer_mode = base + x; - - DPRINTK("base 0x%x xfer_mode 0x%x mask 0x%x x %d\n", - (int)base, (int)xfer_mode, mask, x); + int i; for (i = 0; i < ATA_MAX_DEVICES; i++) { struct ata_device *dev = &ap->device[i]; - if (ata_dev_present(dev)) { - dev->pio_mode = xfer_mode; - dev->xfer_mode = xfer_mode; - dev->xfer_shift = ATA_SHIFT_PIO; - if (ap->ops->set_piomode) - ap->ops->set_piomode(ap, dev); + + if (!ata_dev_present(dev)) + continue; + + if (!dev->pio_mode) { + printk(KERN_WARNING "ata%u: no PIO support\n", ap->id); + return -1; } + + dev->xfer_mode = dev->pio_mode; + dev->xfer_shift = ATA_SHIFT_PIO; + if (ap->ops->set_piomode) + ap->ops->set_piomode(ap, dev); } return 0; } -static void ata_host_set_dma(struct ata_port *ap, u8 xfer_mode, - unsigned int xfer_shift) +static void ata_host_set_dma(struct ata_port *ap) { int i; for (i = 0; i < ATA_MAX_DEVICES; i++) { struct ata_device *dev = &ap->device[i]; - if (ata_dev_present(dev)) { - dev->dma_mode = xfer_mode; - dev->xfer_mode = xfer_mode; - dev->xfer_shift = xfer_shift; - if (ap->ops->set_dmamode) - ap->ops->set_dmamode(ap, dev); - } + + if (!ata_dev_present(dev) || !dev->dma_mode) + continue; + + dev->xfer_mode = dev->dma_mode; + dev->xfer_shift = ata_xfer_mode2shift(dev->dma_mode); + if (ap->ops->set_dmamode) + ap->ops->set_dmamode(ap, dev); } } @@ -1835,28 +1824,34 @@ static void ata_host_set_dma(struct ata_port *ap, u8 xfer_mode, */ static void ata_set_mode(struct ata_port *ap) { - unsigned int xfer_shift; - u8 xfer_mode; - int rc; + int i, rc; - /* step 1: always set host PIO timings */ - rc = ata_host_set_pio(ap); - if (rc) - goto err_out; + /* step 1: calculate xfer_mask */ + for (i = 0; i < ATA_MAX_DEVICES; i++) { + struct ata_device *dev = &ap->device[i]; + unsigned int xfer_mask; + + if (!ata_dev_present(dev)) + continue; - /* step 2: choose the best data xfer mode */ - xfer_mode = xfer_shift = 0; - rc = ata_choose_xfer_mode(ap, &xfer_mode, &xfer_shift); + xfer_mask = ata_dev_xfermask(ap, dev); + + dev->pio_mode = ata_xfer_mask2mode(xfer_mask & ATA_MASK_PIO); + dev->dma_mode = ata_xfer_mask2mode(xfer_mask & (ATA_MASK_MWDMA | + ATA_MASK_UDMA)); + } + + /* step 2: always set host PIO timings */ + rc = ata_host_set_pio(ap); if (rc) goto err_out; - /* step 3: if that xfer mode isn't PIO, set host DMA timings */ - if (xfer_shift != ATA_SHIFT_PIO) - ata_host_set_dma(ap, xfer_mode, xfer_shift); + /* step 3: set host DMA timings */ + ata_host_set_dma(ap); /* step 4: update devices' xfer mode */ - ata_dev_set_mode(ap, &ap->device[0]); - ata_dev_set_mode(ap, &ap->device[1]); + for (i = 0; i < ATA_MAX_DEVICES; i++) + ata_dev_set_mode(ap, &ap->device[i]); if (ap->flags & ATA_FLAG_PORT_DISABLED) return; @@ -2654,77 +2649,45 @@ static int ata_dma_blacklisted(const struct ata_device *dev) return 0; } -static unsigned int ata_get_mode_mask(const struct ata_port *ap, int shift) +/** + * ata_dev_xfermask - Compute supported xfermask of the given device + * @ap: Port on which the device to compute xfermask for resides + * @dev: Device to compute xfermask for + * + * Compute supported xfermask of @dev. This function is + * responsible for applying all known limits including host + * controller limits, device blacklist, etc... + * + * LOCKING: + * None. + * + * RETURNS: + * Computed xfermask. + */ +static unsigned int ata_dev_xfermask(struct ata_port *ap, + struct ata_device *dev) { - const struct ata_device *master, *slave; - unsigned int mask; - - master = &ap->device[0]; - slave = &ap->device[1]; + unsigned long xfer_mask; + int i; - WARN_ON(!ata_dev_present(master) && !ata_dev_present(slave)); + xfer_mask = ata_pack_xfermask(ap->pio_mask, ap->mwdma_mask, + ap->udma_mask); - if (shift == ATA_SHIFT_UDMA) { - mask = ap->udma_mask; - if (ata_dev_present(master)) { - mask &= (master->id[ATA_ID_UDMA_MODES] & 0xff); - if (ata_dma_blacklisted(master)) { - mask = 0; - ata_pr_blacklisted(ap, master); - } - } - if (ata_dev_present(slave)) { - mask &= (slave->id[ATA_ID_UDMA_MODES] & 0xff); - if (ata_dma_blacklisted(slave)) { - mask = 0; - ata_pr_blacklisted(ap, slave); - } - } - } - else if (shift == ATA_SHIFT_MWDMA) { - mask = ap->mwdma_mask; - if (ata_dev_present(master)) { - mask &= (master->id[ATA_ID_MWDMA_MODES] & 0x07); - if (ata_dma_blacklisted(master)) { - mask = 0; - ata_pr_blacklisted(ap, master); - } - } - if (ata_dev_present(slave)) { - mask &= (slave->id[ATA_ID_MWDMA_MODES] & 0x07); - if (ata_dma_blacklisted(slave)) { - mask = 0; - ata_pr_blacklisted(ap, slave); - } - } - } - else if (shift == ATA_SHIFT_PIO) { - mask = ap->pio_mask; - if (ata_dev_present(master)) { - /* spec doesn't return explicit support for - * PIO0-2, so we fake it - */ - u16 tmp_mode = master->id[ATA_ID_PIO_MODES] & 0x03; - tmp_mode <<= 3; - tmp_mode |= 0x7; - mask &= tmp_mode; - } - if (ata_dev_present(slave)) { - /* spec doesn't return explicit support for - * PIO0-2, so we fake it - */ - u16 tmp_mode = slave->id[ATA_ID_PIO_MODES] & 0x03; - tmp_mode <<= 3; - tmp_mode |= 0x7; - mask &= tmp_mode; - } - } - else { - mask = 0xffffffff; /* shut up compiler warning */ - BUG(); + /* use port-wide xfermask for now */ + for (i = 0; i < ATA_MAX_DEVICES; i++) { + struct ata_device *d = &ap->device[i]; + if (!ata_dev_present(d)) + continue; + xfer_mask &= ata_id_xfermask(d->id); + if (ata_dma_blacklisted(d)) + xfer_mask &= ~(ATA_MASK_MWDMA | ATA_MASK_UDMA); } - return mask; + if (ata_dma_blacklisted(dev)) + printk(KERN_WARNING "ata%u: dev %u is on DMA blacklist, " + "disabling DMA\n", ap->id, dev->devno); + + return xfer_mask; } /* find greatest bit */ @@ -2740,44 +2703,6 @@ static int fgb(u32 bitmap) return x; } -/** - * ata_choose_xfer_mode - attempt to find best transfer mode - * @ap: Port for which an xfer mode will be selected - * @xfer_mode_out: (output) SET FEATURES - XFER MODE code - * @xfer_shift_out: (output) bit shift that selects this mode - * - * Based on host and device capabilities, determine the - * maximum transfer mode that is amenable to all. - * - * LOCKING: - * PCI/etc. bus probe sem. - * - * RETURNS: - * Zero on success, negative on error. - */ - -static int ata_choose_xfer_mode(const struct ata_port *ap, - u8 *xfer_mode_out, - unsigned int *xfer_shift_out) -{ - unsigned int mask, shift; - int x, i; - - for (i = 0; i < ARRAY_SIZE(xfer_mode_classes); i++) { - shift = xfer_mode_classes[i].shift; - mask = ata_get_mode_mask(ap, shift); - - x = fgb(mask); - if (x >= 0) { - *xfer_mode_out = xfer_mode_classes[i].base + x; - *xfer_shift_out = shift; - return 0; - } - } - - return -1; -} - /** * ata_dev_set_xfermode - Issue SET FEATURES - XFER MODE command * @ap: Port associated with device @dev -- cgit v1.2.1 From 75f554bc139461a5a926fad6a6fa90433a00a117 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Mon, 6 Mar 2006 04:31:57 +0900 Subject: [PATCH] libata: kill unused xfer_mode functions Preceding xfer_mask changes make the following functions unused. ata_pio_modes(), base_from_shift(), ata_pr_blacklisted(), fgb() Kill them. Also, as xfer_mode_str[] is now only used by ata_mode_string(), move it into the function. Signed-off-by: Tejun Heo Signed-off-by: Jeff Garzik --- drivers/scsi/libata-core.c | 108 ++++++++------------------------------------- 1 file changed, 18 insertions(+), 90 deletions(-) (limited to 'drivers/scsi') diff --git a/drivers/scsi/libata-core.c b/drivers/scsi/libata-core.c index d211f0b1d721..5acb0798534c 100644 --- a/drivers/scsi/libata-core.c +++ b/drivers/scsi/libata-core.c @@ -67,7 +67,6 @@ static void ata_set_mode(struct ata_port *ap); static void ata_dev_set_xfermode(struct ata_port *ap, struct ata_device *dev); static unsigned int ata_dev_xfermask(struct ata_port *ap, struct ata_device *dev); -static int fgb(u32 bitmap); static unsigned int ata_unique_id = 1; static struct workqueue_struct *ata_wq; @@ -331,25 +330,6 @@ static int ata_xfer_mode2shift(unsigned int xfer_mode) return -1; } -static const char * const xfer_mode_str[] = { - "PIO0", - "PIO1", - "PIO2", - "PIO3", - "PIO4", - "MWDMA0", - "MWDMA1", - "MWDMA2", - "UDMA/16", - "UDMA/25", - "UDMA/33", - "UDMA/44", - "UDMA/66", - "UDMA/100", - "UDMA/133", - "UDMA7", -}; - /** * ata_mode_string - convert xfer_mask to string * @xfer_mask: mask of bits supported; only highest bit counts. @@ -364,9 +344,26 @@ static const char * const xfer_mode_str[] = { * Constant C string representing highest speed listed in * @mode_mask, or the constant C string "". */ - static const char *ata_mode_string(unsigned int xfer_mask) { + static const char * const xfer_mode_str[] = { + "PIO0", + "PIO1", + "PIO2", + "PIO3", + "PIO4", + "MWDMA0", + "MWDMA1", + "MWDMA2", + "UDMA/16", + "UDMA/25", + "UDMA/33", + "UDMA/44", + "UDMA/66", + "UDMA/100", + "UDMA/133", + "UDMA7", + }; int highbit; highbit = fls(xfer_mask) - 1; @@ -827,35 +824,6 @@ static unsigned int ata_id_xfermask(const u16 *id) return ata_pack_xfermask(pio_mask, mwdma_mask, udma_mask); } -/* - * Compute the PIO modes available for this device. This is not as - * trivial as it seems if we must consider early devices correctly. - * - * FIXME: pre IDE drive timing (do we care ?). - */ - -static unsigned int ata_pio_modes(const struct ata_device *adev) -{ - u16 modes; - - /* Usual case. Word 53 indicates word 64 is valid */ - if (adev->id[ATA_ID_FIELD_VALID] & (1 << 1)) { - modes = adev->id[ATA_ID_PIO_MODES] & 0x03; - modes <<= 3; - modes |= 0x7; - return modes; - } - - /* If word 64 isn't valid then Word 51 high byte holds the PIO timing - number for the maximum. Turn it into a mask and return it */ - modes = (2 << ((adev->id[ATA_ID_OLD_PIO_MODES] >> 8) & 0xFF)) - 1 ; - return modes; - /* But wait.. there's more. Design your standards by committee and - you too can get a free iordy field to process. However its the - speeds not the modes that are supported... Note drivers using the - timing API will get this right anyway */ -} - /** * ata_port_queue_task - Queue port_task * @ap: The ata_port to queue port_task for @@ -1728,26 +1696,6 @@ int ata_timing_compute(struct ata_device *adev, unsigned short speed, return 0; } -static const struct { - unsigned int shift; - u8 base; -} xfer_mode_classes[] = { - { ATA_SHIFT_UDMA, XFER_UDMA_0 }, - { ATA_SHIFT_MWDMA, XFER_MW_DMA_0 }, - { ATA_SHIFT_PIO, XFER_PIO_0 }, -}; - -static u8 base_from_shift(unsigned int shift) -{ - int i; - - for (i = 0; i < ARRAY_SIZE(xfer_mode_classes); i++) - if (xfer_mode_classes[i].shift == shift) - return xfer_mode_classes[i].base; - - return 0xff; -} - static void ata_dev_set_mode(struct ata_port *ap, struct ata_device *dev) { if (!ata_dev_present(dev) || (ap->flags & ATA_FLAG_PORT_DISABLED)) @@ -2596,13 +2544,6 @@ int ata_dev_revalidate(struct ata_port *ap, struct ata_device *dev, return rc; } -static void ata_pr_blacklisted(const struct ata_port *ap, - const struct ata_device *dev) -{ - printk(KERN_WARNING "ata%u: dev %u is on DMA blacklist, disabling DMA\n", - ap->id, dev->devno); -} - static const char * const ata_dma_blacklist [] = { "WDC AC11000H", "WDC AC22100H", @@ -2690,19 +2631,6 @@ static unsigned int ata_dev_xfermask(struct ata_port *ap, return xfer_mask; } -/* find greatest bit */ -static int fgb(u32 bitmap) -{ - unsigned int i; - int x = -1; - - for (i = 0; i < 32; i++) - if (bitmap & (1 << i)) - x = i; - - return x; -} - /** * ata_dev_set_xfermode - Issue SET FEATURES - XFER MODE command * @ap: Port associated with device @dev -- cgit v1.2.1 From 2061a47a9b9530a9523e51167c996307db951c31 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Sun, 12 Mar 2006 00:57:39 +0900 Subject: [PATCH] libata: fix missing classes[] initialization in ata_bus_probe() ata_bus_probe() didn't initialize classes[] properly with ATA_DEV_UNKNOWN. As ->probe_reset() is allowed to leave @classes alone when no device is present, this results in garbage class values. ATM, the only affected driver is ata_piix. Signed-off-by: Tejun Heo Cc: Jiri Slaby Signed-off-by: Jeff Garzik --- drivers/scsi/libata-core.c | 3 +++ 1 file changed, 3 insertions(+) (limited to 'drivers/scsi') diff --git a/drivers/scsi/libata-core.c b/drivers/scsi/libata-core.c index 5acb0798534c..5a0b67a602df 100644 --- a/drivers/scsi/libata-core.c +++ b/drivers/scsi/libata-core.c @@ -1346,6 +1346,9 @@ static int ata_bus_probe(struct ata_port *ap) /* reset */ if (ap->ops->probe_reset) { + for (i = 0; i < ATA_MAX_DEVICES; i++) + classes[i] = ATA_DEV_UNKNOWN; + rc = ap->ops->probe_reset(ap, classes); if (rc) { printk("ata%u: reset failed (errno=%d)\n", ap->id, rc); -- cgit v1.2.1 From 10d996ad1990ec2338c463042db6d5ef4f347187 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Sat, 11 Mar 2006 11:42:34 +0900 Subject: [PATCH] sata_sil24: exit early from softreset if SStatus reports no device sata_sil24 softreset routine used to check sata_dev_present() after SRST is complete in the hope that SRST may do some good even when SStatus reports no device. This is okay as long as SRST timeout is short (> 100ms in the current code) but it seems that not all SATA devices are happy with short SRST timeout. This patch makes softreset exit early without performing actual SRST if SStatus reports no device in preparation for lengthening SRST timeout. Signed-off-by: Tejun Heo Signed-off-by: Jeff Garzik --- drivers/scsi/sata_sil24.c | 22 ++++++++++++++-------- 1 file changed, 14 insertions(+), 8 deletions(-) (limited to 'drivers/scsi') diff --git a/drivers/scsi/sata_sil24.c b/drivers/scsi/sata_sil24.c index 8fb62427be84..fa1a5ac60639 100644 --- a/drivers/scsi/sata_sil24.c +++ b/drivers/scsi/sata_sil24.c @@ -440,6 +440,12 @@ static int sil24_softreset(struct ata_port *ap, int verbose, DPRINTK("ENTER\n"); + if (!sata_dev_present(ap)) { + DPRINTK("PHY reports no device\n"); + *class = ATA_DEV_NONE; + goto out; + } + /* temporarily turn off IRQs during SRST */ irq_enable = readl(port + PORT_IRQ_ENABLE_SET); writel(irq_enable, port + PORT_IRQ_ENABLE_CLR); @@ -469,18 +475,18 @@ static int sil24_softreset(struct ata_port *ap, int verbose, /* restore IRQs */ writel(irq_enable, port + PORT_IRQ_ENABLE_SET); - if (sata_dev_present(ap)) { - if (!(irq_stat & PORT_IRQ_COMPLETE)) { - DPRINTK("EXIT, srst failed\n"); - return -EIO; - } - - sil24_update_tf(ap); - *class = ata_dev_classify(&pp->tf); + if (!(irq_stat & PORT_IRQ_COMPLETE)) { + DPRINTK("EXIT, srst failed\n"); + return -EIO; } + + sil24_update_tf(ap); + *class = ata_dev_classify(&pp->tf); + if (*class == ATA_DEV_UNKNOWN) *class = ATA_DEV_NONE; + out: DPRINTK("EXIT, class=%u\n", *class); return 0; } -- cgit v1.2.1 From 8645984c357a0262a29b8a28353a576645e2c707 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Sat, 11 Mar 2006 11:44:08 +0900 Subject: [PATCH] sata_sil24: lengthen softreset timeout sil24 softreset timeout was > 100ms (100 loops with msleep(1)), which turned out to be too short for some devices (ASI ARAID99 2000). This patch converts sil24 softreset waiting loop to use proper timeout condition and lengthen the timeout to ATA_TMOUT_BOOT secs and check interval to 100ms. Chisato Yamauchi discovered the problem and supplied initial patch. Signed-off-by: Tejun Heo Cc: Chisato Yamauchi Signed-off-by: Jeff Garzik --- drivers/scsi/sata_sil24.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) (limited to 'drivers/scsi') diff --git a/drivers/scsi/sata_sil24.c b/drivers/scsi/sata_sil24.c index fa1a5ac60639..9a53a5ed38c5 100644 --- a/drivers/scsi/sata_sil24.c +++ b/drivers/scsi/sata_sil24.c @@ -435,8 +435,8 @@ static int sil24_softreset(struct ata_port *ap, int verbose, struct sil24_port_priv *pp = ap->private_data; struct sil24_prb *prb = &pp->cmd_block[0].ata.prb; dma_addr_t paddr = pp->cmd_block_dma; + unsigned long timeout = jiffies + ATA_TMOUT_BOOT * HZ; u32 irq_enable, irq_stat; - int cnt; DPRINTK("ENTER\n"); @@ -461,7 +461,7 @@ static int sil24_softreset(struct ata_port *ap, int verbose, writel((u32)paddr, port + PORT_CMD_ACTIVATE); - for (cnt = 0; cnt < 100; cnt++) { + do { irq_stat = readl(port + PORT_IRQ_STAT); writel(irq_stat, port + PORT_IRQ_STAT); /* clear irq */ @@ -469,8 +469,8 @@ static int sil24_softreset(struct ata_port *ap, int verbose, if (irq_stat & (PORT_IRQ_COMPLETE | PORT_IRQ_ERROR)) break; - msleep(1); - } + msleep(100); + } while (time_before(jiffies, timeout)); /* restore IRQs */ writel(irq_enable, port + PORT_IRQ_ENABLE_SET); -- cgit v1.2.1 From 418dc1f5a805822fcf1118804ddc689a4156db4a Mon Sep 17 00:00:00 2001 From: Jeff Garzik Date: Sat, 11 Mar 2006 20:50:08 -0500 Subject: libata: turn on ATAPI by default --- drivers/scsi/libata-core.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/scsi') diff --git a/drivers/scsi/libata-core.c b/drivers/scsi/libata-core.c index 5a0b67a602df..42d43b55fb8f 100644 --- a/drivers/scsi/libata-core.c +++ b/drivers/scsi/libata-core.c @@ -71,7 +71,7 @@ static unsigned int ata_dev_xfermask(struct ata_port *ap, static unsigned int ata_unique_id = 1; static struct workqueue_struct *ata_wq; -int atapi_enabled = 0; +int atapi_enabled = 1; module_param(atapi_enabled, int, 0444); MODULE_PARM_DESC(atapi_enabled, "Enable discovery of ATAPI devices (0=off, 1=on)"); -- cgit v1.2.1 From 4b10e559277de490bf5c257a1e3264a2bf51404b Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Sun, 12 Mar 2006 11:25:27 +0900 Subject: [PATCH] ahci: enable prefetching for PACKET commands Turn on AHCI_CMD_PREFETCH for PACKET commands. This hints the controller that it can prefetch the CDB and the PRD entries. This patch is originally from Jeff Garzik. Signed-off-by: Tejun Heo Signed-off-by: Jeff Garzik --- drivers/scsi/ahci.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers/scsi') diff --git a/drivers/scsi/ahci.c b/drivers/scsi/ahci.c index 00dfdefe2967..e97ab3e6de4d 100644 --- a/drivers/scsi/ahci.c +++ b/drivers/scsi/ahci.c @@ -66,6 +66,7 @@ enum { AHCI_IRQ_ON_SG = (1 << 31), AHCI_CMD_ATAPI = (1 << 5), AHCI_CMD_WRITE = (1 << 6), + AHCI_CMD_PREFETCH = (1 << 7), AHCI_CMD_RESET = (1 << 8), AHCI_CMD_CLR_BUSY = (1 << 10), @@ -631,7 +632,7 @@ static void ahci_qc_prep(struct ata_queued_cmd *qc) if (qc->tf.flags & ATA_TFLAG_WRITE) opts |= AHCI_CMD_WRITE; if (is_atapi) - opts |= AHCI_CMD_ATAPI; + opts |= AHCI_CMD_ATAPI | AHCI_CMD_PREFETCH; ahci_fill_cmd_slot(pp, opts); } -- cgit v1.2.1 From 2044470cccec1bfe6bb819027975df302ff43bf8 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Mon, 13 Mar 2006 01:57:01 +0900 Subject: [PATCH] libata: fix class handling in ata_bus_probe() ata_bus_probe() didn't set classes[] properly for port disabled case of ->phy_reset() compatibility path. This patch moves classes[] initialization and normalization out of ->probe_reset block such that it applies to both ->probe_reset and ->phy_reset paths. Signed-off-by: Tejun Heo Signed-off-by: Jeff Garzik --- drivers/scsi/libata-core.c | 24 +++++++++++------------- 1 file changed, 11 insertions(+), 13 deletions(-) (limited to 'drivers/scsi') diff --git a/drivers/scsi/libata-core.c b/drivers/scsi/libata-core.c index 42d43b55fb8f..c17df3f22fd1 100644 --- a/drivers/scsi/libata-core.c +++ b/drivers/scsi/libata-core.c @@ -1344,32 +1344,30 @@ static int ata_bus_probe(struct ata_port *ap) ata_port_probe(ap); - /* reset */ - if (ap->ops->probe_reset) { - for (i = 0; i < ATA_MAX_DEVICES; i++) - classes[i] = ATA_DEV_UNKNOWN; + /* reset and determine device classes */ + for (i = 0; i < ATA_MAX_DEVICES; i++) + classes[i] = ATA_DEV_UNKNOWN; + if (ap->ops->probe_reset) { rc = ap->ops->probe_reset(ap, classes); if (rc) { printk("ata%u: reset failed (errno=%d)\n", ap->id, rc); return rc; } - - for (i = 0; i < ATA_MAX_DEVICES; i++) - if (classes[i] == ATA_DEV_UNKNOWN) - classes[i] = ATA_DEV_NONE; } else { ap->ops->phy_reset(ap); - for (i = 0; i < ATA_MAX_DEVICES; i++) { - if (!(ap->flags & ATA_FLAG_PORT_DISABLED)) + if (!(ap->flags & ATA_FLAG_PORT_DISABLED)) + for (i = 0; i < ATA_MAX_DEVICES; i++) classes[i] = ap->device[i].class; - else - ap->device[i].class = ATA_DEV_UNKNOWN; - } + ata_port_probe(ap); } + for (i = 0; i < ATA_MAX_DEVICES; i++) + if (classes[i] == ATA_DEV_UNKNOWN) + classes[i] = ATA_DEV_NONE; + /* read IDENTIFY page and configure devices */ for (i = 0; i < ATA_MAX_DEVICES; i++) { struct ata_device *dev = &ap->device[i]; -- cgit v1.2.1 From fb21f0d0ec7e31cc814165e1a9d2662d9c9dd980 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Sun, 12 Mar 2006 12:34:35 +0900 Subject: [PATCH] libata: check Word 88 validity in ata_id_xfer_mask() Check bit 2 of Word 53 for Word 88 validity before using Word 88 to determine UDMA mask. Note that the original xfer mask implementation using ata_get_mode_mask() didn't consider bit 2 of Word 53. This patch introduces different (correct) behavior. Signed-off-by: Tejun Heo Signed-off-by: Jeff Garzik --- drivers/scsi/libata-core.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) (limited to 'drivers/scsi') diff --git a/drivers/scsi/libata-core.c b/drivers/scsi/libata-core.c index c17df3f22fd1..439b6db13802 100644 --- a/drivers/scsi/libata-core.c +++ b/drivers/scsi/libata-core.c @@ -819,7 +819,10 @@ static unsigned int ata_id_xfermask(const u16 *id) } mwdma_mask = id[ATA_ID_MWDMA_MODES] & 0x07; - udma_mask = id[ATA_ID_UDMA_MODES] & 0xff; + + udma_mask = 0; + if (id[ATA_ID_FIELD_VALID] & (1 << 2)) + udma_mask = id[ATA_ID_UDMA_MODES] & 0xff; return ata_pack_xfermask(pio_mask, mwdma_mask, udma_mask); } -- cgit v1.2.1 From 1148c3a78aa9f1e84229cd17f94fd38a15ca65bd Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Mon, 13 Mar 2006 19:48:04 +0900 Subject: [PATCH] libata: use local *id instead of dev->id in ata_dev_configure() dev->id is used many times in ata_dev_configure(). Use local variable id instead for shorter notation. Signed-off-by: Tejun Heo Signed-off-by: Jeff Garzik --- drivers/scsi/libata-core.c | 33 +++++++++++++++++---------------- 1 file changed, 17 insertions(+), 16 deletions(-) (limited to 'drivers/scsi') diff --git a/drivers/scsi/libata-core.c b/drivers/scsi/libata-core.c index 439b6db13802..6fe41fb03929 100644 --- a/drivers/scsi/libata-core.c +++ b/drivers/scsi/libata-core.c @@ -1193,6 +1193,7 @@ static inline u8 ata_dev_knobble(const struct ata_port *ap, static int ata_dev_configure(struct ata_port *ap, struct ata_device *dev, int print_info) { + const u16 *id = dev->id; unsigned int xfer_mask; int i, rc; @@ -1218,27 +1219,27 @@ static int ata_dev_configure(struct ata_port *ap, struct ata_device *dev, */ /* we require DMA support (bits 8 of word 49) */ - if (!ata_id_has_dma(dev->id)) { + if (!ata_id_has_dma(id)) { printk(KERN_DEBUG "ata%u: no dma\n", ap->id); rc = -EINVAL; goto err_out_nosup; } /* find max transfer mode; for printk only */ - xfer_mask = ata_id_xfermask(dev->id); + xfer_mask = ata_id_xfermask(id); - ata_dump_id(dev->id); + ata_dump_id(id); /* ATA-specific feature tests */ if (dev->class == ATA_DEV_ATA) { - dev->n_sectors = ata_id_n_sectors(dev->id); + dev->n_sectors = ata_id_n_sectors(id); - if (ata_id_has_lba(dev->id)) { + if (ata_id_has_lba(id)) { const char *lba_desc; lba_desc = "LBA"; dev->flags |= ATA_DFLAG_LBA; - if (ata_id_has_lba48(dev->id)) { + if (ata_id_has_lba48(id)) { dev->flags |= ATA_DFLAG_LBA48; lba_desc = "LBA48"; } @@ -1248,7 +1249,7 @@ static int ata_dev_configure(struct ata_port *ap, struct ata_device *dev, printk(KERN_INFO "ata%u: dev %u ATA-%d, " "max %s, %Lu sectors: %s\n", ap->id, dev->devno, - ata_id_major_version(dev->id), + ata_id_major_version(id), ata_mode_string(xfer_mask), (unsigned long long)dev->n_sectors, lba_desc); @@ -1256,15 +1257,15 @@ static int ata_dev_configure(struct ata_port *ap, struct ata_device *dev, /* CHS */ /* Default translation */ - dev->cylinders = dev->id[1]; - dev->heads = dev->id[3]; - dev->sectors = dev->id[6]; + dev->cylinders = id[1]; + dev->heads = id[3]; + dev->sectors = id[6]; - if (ata_id_current_chs_valid(dev->id)) { + if (ata_id_current_chs_valid(id)) { /* Current CHS translation is valid. */ - dev->cylinders = dev->id[54]; - dev->heads = dev->id[55]; - dev->sectors = dev->id[56]; + dev->cylinders = id[54]; + dev->heads = id[55]; + dev->sectors = id[56]; } /* print device info to dmesg */ @@ -1272,7 +1273,7 @@ static int ata_dev_configure(struct ata_port *ap, struct ata_device *dev, printk(KERN_INFO "ata%u: dev %u ATA-%d, " "max %s, %Lu sectors: CHS %u/%u/%u\n", ap->id, dev->devno, - ata_id_major_version(dev->id), + ata_id_major_version(id), ata_mode_string(xfer_mask), (unsigned long long)dev->n_sectors, dev->cylinders, dev->heads, dev->sectors); @@ -1283,7 +1284,7 @@ static int ata_dev_configure(struct ata_port *ap, struct ata_device *dev, /* ATAPI-specific feature tests */ else if (dev->class == ATA_DEV_ATAPI) { - rc = atapi_cdb_len(dev->id); + rc = atapi_cdb_len(id); if ((rc < 12) || (rc > ATAPI_CDB_LEN)) { printk(KERN_WARNING "ata%u: unsupported CDB len\n", ap->id); rc = -EINVAL; -- cgit v1.2.1 From c39f5ebe0a542caab30c88e60623709c7bc6fe30 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Mon, 13 Mar 2006 19:51:19 +0900 Subject: [PATCH] libata: move IDENTIFY info printing from ata_dev_read_id() to ata_dev_configure() Move IDENTIFY info printing from ata_dev_read_id() to ata_dev_configure() and print only if @print_info is non-zero. This kills duplicate IDENTIFY info printing during probing. Signed-off-by: Tejun Heo Signed-off-by: Jeff Garzik --- drivers/scsi/libata-core.c | 13 +++++++------ 1 file changed, 7 insertions(+), 6 deletions(-) (limited to 'drivers/scsi') diff --git a/drivers/scsi/libata-core.c b/drivers/scsi/libata-core.c index 6fe41fb03929..714b42bad935 100644 --- a/drivers/scsi/libata-core.c +++ b/drivers/scsi/libata-core.c @@ -1120,12 +1120,6 @@ static int ata_dev_read_id(struct ata_port *ap, struct ata_device *dev, swap_buf_le16(id, ATA_ID_WORDS); - /* print device capabilities */ - printk(KERN_DEBUG "ata%u: dev %u cfg " - "49:%04x 82:%04x 83:%04x 84:%04x 85:%04x 86:%04x 87:%04x 88:%04x\n", - ap->id, dev->devno, - id[49], id[82], id[83], id[84], id[85], id[86], id[87], id[88]); - /* sanity check */ if ((class == ATA_DEV_ATA) != ata_id_is_ata(id)) { rc = -EINVAL; @@ -1205,6 +1199,13 @@ static int ata_dev_configure(struct ata_port *ap, struct ata_device *dev, DPRINTK("ENTER, host %u, dev %u\n", ap->id, dev->devno); + /* print device capabilities */ + if (print_info) + printk(KERN_DEBUG "ata%u: dev %u cfg 49:%04x 82:%04x 83:%04x " + "84:%04x 85:%04x 86:%04x 87:%04x 88:%04x\n", + ap->id, dev->devno, id[49], id[82], id[83], + id[84], id[85], id[86], id[87], id[88]); + /* initialize to-be-configured parameters */ dev->flags = 0; dev->max_sectors = 0; -- cgit v1.2.1 From 8075f21fc6dac8fb16372a7d4e28d9f21077cdda Mon Sep 17 00:00:00 2001 From: Adrian Bunk Date: Mon, 20 Mar 2006 20:21:24 +0100 Subject: SCSI_AACRAID: add a help text Most of the text by Mark Salyzyn . Signed-off-by: Adrian Bunk Acked-by: Mark Salyzyn --- drivers/scsi/Kconfig | 8 ++++++++ 1 file changed, 8 insertions(+) (limited to 'drivers/scsi') diff --git a/drivers/scsi/Kconfig b/drivers/scsi/Kconfig index 3c606cf8c8ca..5c94a5d4efc0 100644 --- a/drivers/scsi/Kconfig +++ b/drivers/scsi/Kconfig @@ -379,6 +379,14 @@ config SCSI_AHA1740 config SCSI_AACRAID tristate "Adaptec AACRAID support" depends on SCSI && PCI + help + This driver supports a variety of Dell, HP, Adaptec, IBM and + ICP storage products. For a list of supported products, refer + to . + + To compile this driver as a module, choose M here: the module + will be called aacraid. + source "drivers/scsi/aic7xxx/Kconfig.aic7xxx" -- cgit v1.2.1 From cd85f6e2f58282186ad720fc18482be228f0b972 Mon Sep 17 00:00:00 2001 From: Jeff Garzik Date: Mon, 20 Mar 2006 19:49:54 -0500 Subject: [libata] sata_mv: fix irq port status usage Interrupt handler did not properly initialize a variable on a per-port basis, leading to incorrect behavior on ports other than port 0. Bug caught and fixed by Mark Lord. Signed-off-by: Jeff Garzik --- drivers/scsi/sata_mv.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/scsi') diff --git a/drivers/scsi/sata_mv.c b/drivers/scsi/sata_mv.c index aceaf56999a5..e561281967dd 100644 --- a/drivers/scsi/sata_mv.c +++ b/drivers/scsi/sata_mv.c @@ -1353,7 +1353,6 @@ static void mv_host_intr(struct ata_host_set *host_set, u32 relevant, u32 hc_irq_cause; int shift, port, port0, hard_port, handled; unsigned int err_mask; - u8 ata_status = 0; if (hc == 0) { port0 = 0; @@ -1371,6 +1370,7 @@ static void mv_host_intr(struct ata_host_set *host_set, u32 relevant, hc,relevant,hc_irq_cause); for (port = port0; port < port0 + MV_PORTS_PER_HC; port++) { + u8 ata_status = 0; ap = host_set->ports[port]; hard_port = port & MV_PORT_MASK; /* range 0-3 */ handled = 0; /* ensure ata_status is set if handled++ */ -- cgit v1.2.1