From 8edf63710bd43e62d59bfe017df542fa0713bbb3 Mon Sep 17 00:00:00 2001 From: Andrei Warkentin Date: Mon, 23 May 2011 15:06:39 -0500 Subject: mmc: sdhci: Auto-CMD23 support. Enables Auto-CMD23 support where available (SDHCI 3.0 controllers) Signed-off-by: Andrei Warkentin Tested-by: Arindam Nath Signed-off-by: Chris Ball --- drivers/mmc/host/sdhci.c | 17 ++++++++++++++++- 1 file changed, 16 insertions(+), 1 deletion(-) (limited to 'drivers/mmc/host/sdhci.c') diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c index b9ed66307ac3..f845fd6a64ae 100644 --- a/drivers/mmc/host/sdhci.c +++ b/drivers/mmc/host/sdhci.c @@ -857,7 +857,12 @@ static void sdhci_set_transfer_mode(struct sdhci_host *host, */ if (!host->mrq->sbc && (host->flags & SDHCI_AUTO_CMD12)) mode |= SDHCI_TRNS_AUTO_CMD12; + else if (host->mrq->sbc && (host->flags & SDHCI_AUTO_CMD23)) { + mode |= SDHCI_TRNS_AUTO_CMD23; + sdhci_writel(host, host->mrq->sbc->arg, SDHCI_ARGUMENT2); + } } + if (data->flags & MMC_DATA_READ) mode |= SDHCI_TRNS_READ; if (host->flags & SDHCI_REQ_USE_DMA) @@ -1252,7 +1257,7 @@ static void sdhci_request(struct mmc_host *mmc, struct mmc_request *mrq) host->mrq = mrq; } - if (mrq->sbc) + if (mrq->sbc && !(host->flags & SDHCI_AUTO_CMD23)) sdhci_send_command(host, mrq->sbc); else sdhci_send_command(host, mrq->cmd); @@ -2488,6 +2493,16 @@ int sdhci_add_host(struct sdhci_host *host) if (host->quirks & SDHCI_QUIRK_MULTIBLOCK_READ_ACMD12) host->flags |= SDHCI_AUTO_CMD12; + /* Auto-CMD23 stuff only works in ADMA or PIO. */ + if ((host->version == SDHCI_SPEC_300) && + ((host->flags & SDHCI_USE_ADMA) || + !(host->flags & SDHCI_REQ_USE_DMA))) { + host->flags |= SDHCI_AUTO_CMD23; + DBG("%s: Auto-CMD23 available\n", mmc_hostname(mmc)); + } else { + DBG("%s: Auto-CMD23 unavailable\n", mmc_hostname(mmc)); + } + /* * A controller may support 8-bit width, but the board itself * might not have the pins brought out. Boards that support -- cgit v1.2.1