From 3d61510f4ecacfe47c75c0eb51c0659dfa77fb1b Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Fri, 2 Apr 2010 13:21:58 -0400 Subject: HID: usbhid: enable remote wakeup for keyboards This patch (as1365) enables remote wakeup by default for USB keyboard devices. Keyboards in general are supposed to be wakeup devices, but the correct place to enable it depends on the device's bus; no single approach will work for all keyboard devices. In particular, this covers only USB keyboards (and then only those supporting the boot protocol). Signed-off-by: Alan Stern Signed-off-by: Jiri Kosina --- drivers/hid/usbhid/hid-core.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) (limited to 'drivers/hid/usbhid/hid-core.c') diff --git a/drivers/hid/usbhid/hid-core.c b/drivers/hid/usbhid/hid-core.c index 56d06cd8075b..9cd61a52e9e3 100644 --- a/drivers/hid/usbhid/hid-core.c +++ b/drivers/hid/usbhid/hid-core.c @@ -1026,12 +1026,15 @@ static int usbhid_start(struct hid_device *hid) /* Some keyboards don't work until their LEDs have been set. * Since BIOSes do set the LEDs, it must be safe for any device * that supports the keyboard boot protocol. + * In addition, enable remote wakeup by default for all keyboard + * devices supporting the boot protocol. */ if (interface->desc.bInterfaceSubClass == USB_INTERFACE_SUBCLASS_BOOT && interface->desc.bInterfaceProtocol == - USB_INTERFACE_PROTOCOL_KEYBOARD) + USB_INTERFACE_PROTOCOL_KEYBOARD) { usbhid_set_leds(hid); - + device_set_wakeup_enable(&dev->dev, 1); + } return 0; fail: -- cgit v1.2.1 From b5e5a37e36cd4d355b875665312d7aaae4e5833c Mon Sep 17 00:00:00 2001 From: Bastien Nocera Date: Fri, 16 Apr 2010 17:19:50 +0100 Subject: HID: add HID_QUIRK_HIDDEV_FORCE and HID_QUIRK_NO_IGNORE Add two quirks to make it possible for usbhid module options to override whether a device is ignored (HID_QUIRK_NO_IGNORE) and whether to connect a hiddev device (HID_QUIRK_HIDDEV_FORCE). Passing HID_QUIRK_NO_IGNORE for your device means that it will not be ignored by the HID layer, even if present in a blacklist. HID_QUIRK_HIDDEV_FORCE will force the creation of a hiddev for that device, making it accessible from user-space. Tested with an Apple IR Receiver, switching it from using appleir to using lirc's macmini driver. Signed-off-by: Bastien Nocera Signed-off-by: Jiri Kosina --- drivers/hid/usbhid/hid-core.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers/hid/usbhid/hid-core.c') diff --git a/drivers/hid/usbhid/hid-core.c b/drivers/hid/usbhid/hid-core.c index 9cd61a52e9e3..245aef0de8f2 100644 --- a/drivers/hid/usbhid/hid-core.c +++ b/drivers/hid/usbhid/hid-core.c @@ -1143,6 +1143,7 @@ static int usbhid_probe(struct usb_interface *intf, const struct usb_device_id * hid->vendor = le16_to_cpu(dev->descriptor.idVendor); hid->product = le16_to_cpu(dev->descriptor.idProduct); hid->name[0] = 0; + hid->quirks = usbhid_lookup_quirk(hid->vendor, hid->product); if (intf->cur_altsetting->desc.bInterfaceProtocol == USB_INTERFACE_PROTOCOL_MOUSE) hid->type = HID_TYPE_USBMOUSE; -- cgit v1.2.1 From a8ab5d58b0238b8199cc699b8dff7c5e1da24138 Mon Sep 17 00:00:00 2001 From: Alan Ott Date: Sun, 16 May 2010 18:07:09 -0400 Subject: HID: hidraw: Use Interrupt Endpoint for OUT Transfers if Available This patch makes the hidraw driver use the first Interrupt OUT endpoint for HID transfers to the device if such an endpoint exists. This is consistent with the behavior of the hiddev driver, and the logic is similar. From the USB HID specification: The Interrupt Out pipe is optional. If a device declares an Interrupt Out endpoint then Output reports are transmitted by the host to the device through the Interrupt Out endpoint. If no Interrupt Out endpoint is declared then Output reports are transmitted to a device through the Control endpoint, using Set_Report(Output) requests. Signed-off-by: Alan Ott Signed-off-by: Jiri Kosina --- drivers/hid/usbhid/hid-core.c | 40 ++++++++++++++++++++++++++++++---------- 1 file changed, 30 insertions(+), 10 deletions(-) (limited to 'drivers/hid/usbhid/hid-core.c') diff --git a/drivers/hid/usbhid/hid-core.c b/drivers/hid/usbhid/hid-core.c index 245aef0de8f2..f9640a362caa 100644 --- a/drivers/hid/usbhid/hid-core.c +++ b/drivers/hid/usbhid/hid-core.c @@ -807,16 +807,36 @@ static int usbhid_output_raw_report(struct hid_device *hid, __u8 *buf, size_t co struct usb_host_interface *interface = intf->cur_altsetting; int ret; - ret = usb_control_msg(dev, usb_sndctrlpipe(dev, 0), - HID_REQ_SET_REPORT, - USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_INTERFACE, - ((report_type + 1) << 8) | *buf, - interface->desc.bInterfaceNumber, buf + 1, count - 1, - USB_CTRL_SET_TIMEOUT); - - /* count also the report id */ - if (ret > 0) - ret++; + if (usbhid->urbout) { + int actual_length; + int skipped_report_id = 0; + if (buf[0] == 0x0) { + /* Don't send the Report ID */ + buf++; + count--; + skipped_report_id = 1; + } + ret = usb_interrupt_msg(dev, usbhid->urbout->pipe, + buf, count, &actual_length, + USB_CTRL_SET_TIMEOUT); + /* return the number of bytes transferred */ + if (ret == 0) { + ret = actual_length; + /* count also the report id */ + if (skipped_report_id) + ret++; + } + } else { + ret = usb_control_msg(dev, usb_sndctrlpipe(dev, 0), + HID_REQ_SET_REPORT, + USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_INTERFACE, + ((report_type + 1) << 8) | *buf, + interface->desc.bInterfaceNumber, buf + 1, count - 1, + USB_CTRL_SET_TIMEOUT); + /* count also the report id */ + if (ret > 0) + ret++; + } return ret; } -- cgit v1.2.1