From 1c8c38c588ea91f8deeae21284840459d1bb58e3 Mon Sep 17 00:00:00 2001 From: Chris Wilson Date: Sun, 20 Jan 2013 16:11:20 +0000 Subject: drm/i915: Disable AsyncFlip performance optimisations This is a required workarounds for all products, especially on gen6+ where it causes the command streamer to fail to parse instructions following a WAIT_FOR_EVENT. We use WAIT_FOR_EVENT for synchronising between the GPU and the display engines, and so this bit being unset may cause hangs. References: https://bugzilla.kernel.org/show_bug.cgi?id=52311 Signed-off-by: Chris Wilson Cc: stable@vger.kernel.org Reviewed-by: Imre Deak Signed-off-by: Daniel Vetter --- drivers/gpu/drm/i915/i915_reg.h | 1 + drivers/gpu/drm/i915/intel_ringbuffer.c | 19 +++++++++++++------ 2 files changed, 14 insertions(+), 6 deletions(-) (limited to 'drivers/gpu') diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h index b401788e1791..59afb7eb6db6 100644 --- a/drivers/gpu/drm/i915/i915_reg.h +++ b/drivers/gpu/drm/i915/i915_reg.h @@ -533,6 +533,7 @@ #define MI_MODE 0x0209c # define VS_TIMER_DISPATCH (1 << 6) # define MI_FLUSH_ENABLE (1 << 12) +# define ASYNC_FLIP_PERF_DISABLE (1 << 14) #define GEN6_GT_MODE 0x20d0 #define GEN6_GT_MODE_HI (1 << 9) diff --git a/drivers/gpu/drm/i915/intel_ringbuffer.c b/drivers/gpu/drm/i915/intel_ringbuffer.c index ae253e04c391..1f46a8bf2b05 100644 --- a/drivers/gpu/drm/i915/intel_ringbuffer.c +++ b/drivers/gpu/drm/i915/intel_ringbuffer.c @@ -505,13 +505,20 @@ static int init_render_ring(struct intel_ring_buffer *ring) struct drm_i915_private *dev_priv = dev->dev_private; int ret = init_ring_common(ring); - if (INTEL_INFO(dev)->gen > 3) { + if (INTEL_INFO(dev)->gen > 3) I915_WRITE(MI_MODE, _MASKED_BIT_ENABLE(VS_TIMER_DISPATCH)); - if (IS_GEN7(dev)) - I915_WRITE(GFX_MODE_GEN7, - _MASKED_BIT_DISABLE(GFX_TLB_INVALIDATE_ALWAYS) | - _MASKED_BIT_ENABLE(GFX_REPLAY_MODE)); - } + + /* We need to disable the AsyncFlip performance optimisations in order + * to use MI_WAIT_FOR_EVENT within the CS. It should already be + * programmed to '1' on all products. + */ + if (INTEL_INFO(dev)->gen >= 6) + I915_WRITE(MI_MODE, _MASKED_BIT_ENABLE(ASYNC_FLIP_PERF_DISABLE)); + + if (IS_GEN7(dev)) + I915_WRITE(GFX_MODE_GEN7, + _MASKED_BIT_DISABLE(GFX_TLB_INVALIDATE_ALWAYS) | + _MASKED_BIT_ENABLE(GFX_REPLAY_MODE)); if (INTEL_INFO(dev)->gen >= 5) { ret = init_pipe_control(ring); -- cgit v1.2.1 From f05bb0c7b624252a5e768287e340e8e45df96e42 Mon Sep 17 00:00:00 2001 From: Chris Wilson Date: Sun, 20 Jan 2013 16:33:32 +0000 Subject: drm/i915: GFX_MODE Flush TLB Invalidate Mode must be '1' for scanline waits On SNB, if bit 13 of GFX_MODE, Flush TLB Invalidate Mode, is not set to 1, the hardware can not program the scanline values. Those scanline values then control when the signal is sent from the display engine to the render ring for MI_WAIT_FOR_EVENTs. Note setting this bit means that TLB invalidations must be performed explicitly through the appropriate bits being set in PIPE_CONTROL. References: https://bugzilla.kernel.org/show_bug.cgi?id=52311 Signed-off-by: Chris Wilson Cc: stable@vger.kernel.org Reviewed-by: Ben Widawsky Signed-off-by: Daniel Vetter --- drivers/gpu/drm/i915/intel_ringbuffer.c | 5 +++++ 1 file changed, 5 insertions(+) (limited to 'drivers/gpu') diff --git a/drivers/gpu/drm/i915/intel_ringbuffer.c b/drivers/gpu/drm/i915/intel_ringbuffer.c index 1f46a8bf2b05..42ff97d667d2 100644 --- a/drivers/gpu/drm/i915/intel_ringbuffer.c +++ b/drivers/gpu/drm/i915/intel_ringbuffer.c @@ -515,6 +515,11 @@ static int init_render_ring(struct intel_ring_buffer *ring) if (INTEL_INFO(dev)->gen >= 6) I915_WRITE(MI_MODE, _MASKED_BIT_ENABLE(ASYNC_FLIP_PERF_DISABLE)); + /* Required for the hardware to program scanline values for waiting */ + if (INTEL_INFO(dev)->gen == 6) + I915_WRITE(GFX_MODE, + _MASKED_BIT_ENABLE(GFX_TLB_INVALIDATE_ALWAYS)); + if (IS_GEN7(dev)) I915_WRITE(GFX_MODE_GEN7, _MASKED_BIT_DISABLE(GFX_TLB_INVALIDATE_ALWAYS) | -- cgit v1.2.1 From 4518f611ba21ba165ea3714055938a8984a44ff9 Mon Sep 17 00:00:00 2001 From: Daniel Vetter Date: Wed, 23 Jan 2013 16:16:35 +0100 Subject: drm/i915: dump UTS_RELEASE into the error_state Useful for statistics or on overflowing bug reports to keep things all lined up. Reviewed-by: Chris Wilson Cc: stable@vger.kernel.org Signed-off-by: Daniel Vetter --- drivers/gpu/drm/i915/i915_debugfs.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'drivers/gpu') diff --git a/drivers/gpu/drm/i915/i915_debugfs.c b/drivers/gpu/drm/i915/i915_debugfs.c index 7944d301518a..9d4a2c2adf0e 100644 --- a/drivers/gpu/drm/i915/i915_debugfs.c +++ b/drivers/gpu/drm/i915/i915_debugfs.c @@ -30,6 +30,7 @@ #include #include #include +#include #include #include "intel_drv.h" #include "intel_ringbuffer.h" @@ -690,6 +691,7 @@ static int i915_error_state(struct seq_file *m, void *unused) seq_printf(m, "Time: %ld s %ld us\n", error->time.tv_sec, error->time.tv_usec); + seq_printf(m, "Kernel: " UTS_RELEASE); seq_printf(m, "PCI ID: 0x%04x\n", dev->pci_device); seq_printf(m, "EIR: 0x%08x\n", error->eir); seq_printf(m, "IER: 0x%08x\n", error->ier); -- cgit v1.2.1