From 995a9190ac9ca85cc15d11d9566017e91c58a118 Mon Sep 17 00:00:00 2001 From: Laurent Pinchart Date: Tue, 7 Jan 2014 17:47:52 +0100 Subject: clk: shmobile: rcar-gen2: Fix clock parent all non-PLL clocks The lb, qspi, sdh, sd0 and sd1 clocks have the PLL1 (divided by 2) as their parent, not the main clock. Fix it. Reported-by: Geert Uytterhoeven Signed-off-by: Laurent Pinchart Tested-by: Geert Uytterhoeven Acked-by: Simon Horman Signed-off-by: Mike Turquette --- drivers/clk/shmobile/clk-rcar-gen2.c | 10 +++++++++- 1 file changed, 9 insertions(+), 1 deletion(-) (limited to 'drivers/clk/shmobile') diff --git a/drivers/clk/shmobile/clk-rcar-gen2.c b/drivers/clk/shmobile/clk-rcar-gen2.c index a59ec217a124..8c7bcbd727df 100644 --- a/drivers/clk/shmobile/clk-rcar-gen2.c +++ b/drivers/clk/shmobile/clk-rcar-gen2.c @@ -186,7 +186,7 @@ rcar_gen2_cpg_register_clock(struct device_node *np, struct rcar_gen2_cpg *cpg, const char *name) { const struct clk_div_table *table = NULL; - const char *parent_name = "main"; + const char *parent_name; unsigned int shift; unsigned int mult = 1; unsigned int div = 1; @@ -201,23 +201,31 @@ rcar_gen2_cpg_register_clock(struct device_node *np, struct rcar_gen2_cpg *cpg, * the multiplier value. */ u32 value = clk_readl(cpg->reg + CPG_PLL0CR); + parent_name = "main"; mult = ((value >> 24) & ((1 << 7) - 1)) + 1; } else if (!strcmp(name, "pll1")) { + parent_name = "main"; mult = config->pll1_mult / 2; } else if (!strcmp(name, "pll3")) { + parent_name = "main"; mult = config->pll3_mult; } else if (!strcmp(name, "lb")) { + parent_name = "pll1_div2"; div = cpg_mode & BIT(18) ? 36 : 24; } else if (!strcmp(name, "qspi")) { + parent_name = "pll1_div2"; div = (cpg_mode & (BIT(3) | BIT(2) | BIT(1))) == BIT(2) ? 16 : 20; } else if (!strcmp(name, "sdh")) { + parent_name = "pll1_div2"; table = cpg_sdh_div_table; shift = 8; } else if (!strcmp(name, "sd0")) { + parent_name = "pll1_div2"; table = cpg_sd01_div_table; shift = 4; } else if (!strcmp(name, "sd1")) { + parent_name = "pll1_div2"; table = cpg_sd01_div_table; shift = 0; } else if (!strcmp(name, "z")) { -- cgit v1.2.1 From 8510e7263ad9399e771e0f67517a0d5409390445 Mon Sep 17 00:00:00 2001 From: Laurent Pinchart Date: Tue, 7 Jan 2014 17:47:53 +0100 Subject: clk: shmobile: rcar-gen2: Fix qspi divisor The qspi clock divisor is incorrectly set to twice the value it should have, possibly because it has been computed based on PLL1 as the clock parent instead of PLL1 / 2 (the datasheets specifies the qspi nominal frequencies, not the divisor values). Fix it. Reported-by: Geert Uytterhoeven Signed-off-by: Laurent Pinchart Tested-by: Geert Uytterhoeven Acked-by: Simon Horman Signed-off-by: Mike Turquette --- drivers/clk/shmobile/clk-rcar-gen2.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/clk/shmobile') diff --git a/drivers/clk/shmobile/clk-rcar-gen2.c b/drivers/clk/shmobile/clk-rcar-gen2.c index 8c7bcbd727df..dd272a0d1446 100644 --- a/drivers/clk/shmobile/clk-rcar-gen2.c +++ b/drivers/clk/shmobile/clk-rcar-gen2.c @@ -215,7 +215,7 @@ rcar_gen2_cpg_register_clock(struct device_node *np, struct rcar_gen2_cpg *cpg, } else if (!strcmp(name, "qspi")) { parent_name = "pll1_div2"; div = (cpg_mode & (BIT(3) | BIT(2) | BIT(1))) == BIT(2) - ? 16 : 20; + ? 8 : 10; } else if (!strcmp(name, "sdh")) { parent_name = "pll1_div2"; table = cpg_sdh_div_table; -- cgit v1.2.1