From be96447e0d49622fe00b07474f9a86805d389ca7 Mon Sep 17 00:00:00 2001 From: Kay Sievers Date: Tue, 8 May 2012 17:24:20 +0200 Subject: acpi: use KERN_CONT in printk() continuation lines Cc: Len Brown Signed-off-by: Kay Sievers Signed-off-by: Greg Kroah-Hartman --- drivers/acpi/sleep.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) (limited to 'drivers/acpi/sleep.c') diff --git a/drivers/acpi/sleep.c b/drivers/acpi/sleep.c index eb6fd233764b..06527c526618 100644 --- a/drivers/acpi/sleep.c +++ b/drivers/acpi/sleep.c @@ -887,7 +887,7 @@ int __init acpi_sleep_init(void) status = acpi_get_sleep_type_data(i, &type_a, &type_b); if (ACPI_SUCCESS(status)) { sleep_states[i] = 1; - printk(" S%d", i); + printk(KERN_CONT " S%d", i); } } @@ -901,7 +901,7 @@ int __init acpi_sleep_init(void) hibernation_set_ops(old_suspend_ordering ? &acpi_hibernation_ops_old : &acpi_hibernation_ops); sleep_states[ACPI_STATE_S4] = 1; - printk(" S4"); + printk(KERN_CONT " S4"); if (!nosigcheck) { acpi_get_table(ACPI_SIG_FACS, 1, (struct acpi_table_header **)&facs); @@ -914,11 +914,11 @@ int __init acpi_sleep_init(void) status = acpi_get_sleep_type_data(ACPI_STATE_S5, &type_a, &type_b); if (ACPI_SUCCESS(status)) { sleep_states[ACPI_STATE_S5] = 1; - printk(" S5"); + printk(KERN_CONT " S5"); pm_power_off_prepare = acpi_power_off_prepare; pm_power_off = acpi_power_off; } - printk(")\n"); + printk(KERN_CONT ")\n"); /* * Register the tts_notifier to reboot notifier list so that the _TTS * object can also be evaluated when the system enters S5. -- cgit v1.2.3 From c9b77ccb52a5c77233b0e557b7d4417b00ef4012 Mon Sep 17 00:00:00 2001 From: Jarkko Sakkinen Date: Tue, 8 May 2012 21:22:29 +0300 Subject: x86, realmode: Move ACPI wakeup to unified realmode code Migrated ACPI wakeup code to the real-mode blob. Code existing in .x86_trampoline can be completely removed. Static descriptor table in wakeup_asm.S is courtesy of H. Peter Anvin. Signed-off-by: Jarkko Sakkinen Link: http://lkml.kernel.org/r/1336501366-28617-7-git-send-email-jarkko.sakkinen@intel.com Cc: Rafael J. Wysocki Cc: Len Brown Signed-off-by: H. Peter Anvin --- arch/x86/include/asm/acpi.h | 2 - arch/x86/include/asm/realmode.h | 4 + arch/x86/include/asm/trampoline.h | 39 ------ arch/x86/kernel/Makefile | 1 - arch/x86/kernel/acpi/Makefile | 9 +- arch/x86/kernel/acpi/realmode/.gitignore | 3 - arch/x86/kernel/acpi/realmode/Makefile | 59 --------- arch/x86/kernel/acpi/realmode/bioscall.S | 1 - arch/x86/kernel/acpi/realmode/copy.S | 1 - arch/x86/kernel/acpi/realmode/regs.c | 1 - arch/x86/kernel/acpi/realmode/video-bios.c | 1 - arch/x86/kernel/acpi/realmode/video-mode.c | 1 - arch/x86/kernel/acpi/realmode/video-vesa.c | 1 - arch/x86/kernel/acpi/realmode/video-vga.c | 1 - arch/x86/kernel/acpi/realmode/wakemain.c | 81 ------------- arch/x86/kernel/acpi/realmode/wakeup.S | 170 -------------------------- arch/x86/kernel/acpi/realmode/wakeup.h | 48 -------- arch/x86/kernel/acpi/realmode/wakeup.lds.S | 62 ---------- arch/x86/kernel/acpi/sleep.c | 33 +---- arch/x86/kernel/acpi/sleep.h | 2 +- arch/x86/kernel/acpi/wakeup_rm.S | 12 -- arch/x86/kernel/head32.c | 1 - arch/x86/kernel/head64.c | 1 - arch/x86/kernel/mpparse.c | 1 - arch/x86/kernel/setup.c | 2 - arch/x86/kernel/tboot.c | 5 +- arch/x86/kernel/trampoline.c | 42 ------- arch/x86/kernel/trampoline_32.S | 83 ------------- arch/x86/kernel/trampoline_64.S | 171 -------------------------- arch/x86/kernel/vmlinux.lds.S | 12 -- arch/x86/realmode/rm/Makefile | 4 + arch/x86/realmode/rm/header.S | 5 + arch/x86/realmode/rm/realmode.lds.S | 4 + arch/x86/realmode/rm/wakeup/.gitignore | 3 + arch/x86/realmode/rm/wakeup/Makefile | 33 +++++ arch/x86/realmode/rm/wakeup/bioscall.S | 1 + arch/x86/realmode/rm/wakeup/copy.S | 1 + arch/x86/realmode/rm/wakeup/regs.c | 1 + arch/x86/realmode/rm/wakeup/video-bios.c | 1 + arch/x86/realmode/rm/wakeup/video-mode.c | 1 + arch/x86/realmode/rm/wakeup/video-vesa.c | 1 + arch/x86/realmode/rm/wakeup/video-vga.c | 1 + arch/x86/realmode/rm/wakeup/wakemain.c | 82 +++++++++++++ arch/x86/realmode/rm/wakeup/wakeup.h | 41 +++++++ arch/x86/realmode/rm/wakeup/wakeup_asm.S | 189 +++++++++++++++++++++++++++++ drivers/acpi/sleep.c | 8 +- 46 files changed, 386 insertions(+), 840 deletions(-) delete mode 100644 arch/x86/include/asm/trampoline.h delete mode 100644 arch/x86/kernel/acpi/realmode/.gitignore delete mode 100644 arch/x86/kernel/acpi/realmode/Makefile delete mode 100644 arch/x86/kernel/acpi/realmode/bioscall.S delete mode 100644 arch/x86/kernel/acpi/realmode/copy.S delete mode 100644 arch/x86/kernel/acpi/realmode/regs.c delete mode 100644 arch/x86/kernel/acpi/realmode/video-bios.c delete mode 100644 arch/x86/kernel/acpi/realmode/video-mode.c delete mode 100644 arch/x86/kernel/acpi/realmode/video-vesa.c delete mode 100644 arch/x86/kernel/acpi/realmode/video-vga.c delete mode 100644 arch/x86/kernel/acpi/realmode/wakemain.c delete mode 100644 arch/x86/kernel/acpi/realmode/wakeup.S delete mode 100644 arch/x86/kernel/acpi/realmode/wakeup.h delete mode 100644 arch/x86/kernel/acpi/realmode/wakeup.lds.S delete mode 100644 arch/x86/kernel/acpi/wakeup_rm.S delete mode 100644 arch/x86/kernel/trampoline.c delete mode 100644 arch/x86/kernel/trampoline_32.S delete mode 100644 arch/x86/kernel/trampoline_64.S create mode 100644 arch/x86/realmode/rm/wakeup/.gitignore create mode 100644 arch/x86/realmode/rm/wakeup/Makefile create mode 100644 arch/x86/realmode/rm/wakeup/bioscall.S create mode 100644 arch/x86/realmode/rm/wakeup/copy.S create mode 100644 arch/x86/realmode/rm/wakeup/regs.c create mode 100644 arch/x86/realmode/rm/wakeup/video-bios.c create mode 100644 arch/x86/realmode/rm/wakeup/video-mode.c create mode 100644 arch/x86/realmode/rm/wakeup/video-vesa.c create mode 100644 arch/x86/realmode/rm/wakeup/video-vga.c create mode 100644 arch/x86/realmode/rm/wakeup/wakemain.c create mode 100644 arch/x86/realmode/rm/wakeup/wakeup.h create mode 100644 arch/x86/realmode/rm/wakeup/wakeup_asm.S (limited to 'drivers/acpi/sleep.c') diff --git a/arch/x86/include/asm/acpi.h b/arch/x86/include/asm/acpi.h index 610001d385dd..724aa441de7d 100644 --- a/arch/x86/include/asm/acpi.h +++ b/arch/x86/include/asm/acpi.h @@ -29,7 +29,6 @@ #include #include #include -#include #define COMPILER_DEPENDENT_INT64 long long #define COMPILER_DEPENDENT_UINT64 unsigned long long @@ -118,7 +117,6 @@ static inline void acpi_disable_pci(void) extern int acpi_suspend_lowlevel(void); extern const unsigned char acpi_wakeup_code[]; -#define acpi_wakeup_address (__pa(TRAMPOLINE_SYM(acpi_wakeup_code))) /* early initialization routine */ extern void acpi_reserve_wakeup_memory(void); diff --git a/arch/x86/include/asm/realmode.h b/arch/x86/include/asm/realmode.h index 9b4a5da5e22e..1bfc74d213a4 100644 --- a/arch/x86/include/asm/realmode.h +++ b/arch/x86/include/asm/realmode.h @@ -24,6 +24,10 @@ struct real_mode_header { u32 level3_ident_pgt; u32 level3_kernel_pgt; #endif +#ifdef CONFIG_ACPI_SLEEP + u32 wakeup_start; + u32 wakeup_header; +#endif } __attribute__((__packed__)); extern struct real_mode_header real_mode_header; diff --git a/arch/x86/include/asm/trampoline.h b/arch/x86/include/asm/trampoline.h deleted file mode 100644 index feca3118a73b..000000000000 --- a/arch/x86/include/asm/trampoline.h +++ /dev/null @@ -1,39 +0,0 @@ -#ifndef _ASM_X86_TRAMPOLINE_H -#define _ASM_X86_TRAMPOLINE_H - -#ifndef __ASSEMBLY__ - -#include -#include - -/* - * Trampoline 80x86 program as an array. These are in the init rodata - * segment, but that's okay, because we only care about the relative - * addresses of the symbols. - */ -extern const unsigned char x86_trampoline_start []; -extern const unsigned char x86_trampoline_end []; -extern unsigned char *x86_trampoline_base; - -extern unsigned long init_rsp; -extern unsigned long initial_code; -extern unsigned long initial_gs; - -extern void __init setup_trampolines(void); - -extern const unsigned char trampoline_data[]; -extern const unsigned char trampoline_status[]; - -#define TRAMPOLINE_SYM(x) \ - ((void *)(x86_trampoline_base + \ - ((const unsigned char *)(x) - x86_trampoline_start))) - -/* Address of the SMP trampoline */ -static inline unsigned long trampoline_address(void) -{ - return virt_to_phys(TRAMPOLINE_SYM(trampoline_data)); -} - -#endif /* __ASSEMBLY__ */ - -#endif /* _ASM_X86_TRAMPOLINE_H */ diff --git a/arch/x86/kernel/Makefile b/arch/x86/kernel/Makefile index b71ef35c7d77..4a20f4441ffe 100644 --- a/arch/x86/kernel/Makefile +++ b/arch/x86/kernel/Makefile @@ -35,7 +35,6 @@ obj-y += tsc.o io_delay.o rtc.o obj-y += pci-iommu_table.o obj-y += resource.o -obj-y += trampoline.o trampoline_$(BITS).o obj-y += realmode.o obj-y += process.o obj-y += i387.o xsave.o diff --git a/arch/x86/kernel/acpi/Makefile b/arch/x86/kernel/acpi/Makefile index 6f35260bb3ef..163b22581472 100644 --- a/arch/x86/kernel/acpi/Makefile +++ b/arch/x86/kernel/acpi/Makefile @@ -1,14 +1,7 @@ -subdir- := realmode - obj-$(CONFIG_ACPI) += boot.o -obj-$(CONFIG_ACPI_SLEEP) += sleep.o wakeup_rm.o wakeup_$(BITS).o +obj-$(CONFIG_ACPI_SLEEP) += sleep.o wakeup_$(BITS).o ifneq ($(CONFIG_ACPI_PROCESSOR),) obj-y += cstate.o endif -$(obj)/wakeup_rm.o: $(obj)/realmode/wakeup.bin - -$(obj)/realmode/wakeup.bin: FORCE - $(Q)$(MAKE) $(build)=$(obj)/realmode - diff --git a/arch/x86/kernel/acpi/realmode/.gitignore b/arch/x86/kernel/acpi/realmode/.gitignore deleted file mode 100644 index 58f1f48a58f8..000000000000 --- a/arch/x86/kernel/acpi/realmode/.gitignore +++ /dev/null @@ -1,3 +0,0 @@ -wakeup.bin -wakeup.elf -wakeup.lds diff --git a/arch/x86/kernel/acpi/realmode/Makefile b/arch/x86/kernel/acpi/realmode/Makefile deleted file mode 100644 index 6a564ac67ef5..000000000000 --- a/arch/x86/kernel/acpi/realmode/Makefile +++ /dev/null @@ -1,59 +0,0 @@ -# -# arch/x86/kernel/acpi/realmode/Makefile -# -# This file is subject to the terms and conditions of the GNU General Public -# License. See the file "COPYING" in the main directory of this archive -# for more details. -# - -always := wakeup.bin -targets := wakeup.elf wakeup.lds - -wakeup-y += wakeup.o wakemain.o video-mode.o copy.o bioscall.o regs.o - -# The link order of the video-*.o modules can matter. In particular, -# video-vga.o *must* be listed first, followed by video-vesa.o. -# Hardware-specific drivers should follow in the order they should be -# probed, and video-bios.o should typically be last. -wakeup-y += video-vga.o -wakeup-y += video-vesa.o -wakeup-y += video-bios.o - -targets += $(wakeup-y) - -bootsrc := $(src)/../../../boot - -# --------------------------------------------------------------------------- - -# How to compile the 16-bit code. Note we always compile for -march=i386, -# that way we can complain to the user if the CPU is insufficient. -# Compile with _SETUP since this is similar to the boot-time setup code. -KBUILD_CFLAGS := $(LINUXINCLUDE) -g -Os -D_SETUP -D_WAKEUP -D__KERNEL__ \ - -I$(srctree)/$(bootsrc) \ - $(cflags-y) \ - -Wall -Wstrict-prototypes \ - -march=i386 -mregparm=3 \ - -include $(srctree)/$(bootsrc)/code16gcc.h \ - -fno-strict-aliasing -fomit-frame-pointer \ - $(call cc-option, -ffreestanding) \ - $(call cc-option, -fno-toplevel-reorder,\ - $(call cc-option, -fno-unit-at-a-time)) \ - $(call cc-option, -fno-stack-protector) \ - $(call cc-option, -mpreferred-stack-boundary=2) -KBUILD_CFLAGS += $(call cc-option, -m32) -KBUILD_AFLAGS := $(KBUILD_CFLAGS) -D__ASSEMBLY__ -GCOV_PROFILE := n - -WAKEUP_OBJS = $(addprefix $(obj)/,$(wakeup-y)) - -LDFLAGS_wakeup.elf := -T - -CPPFLAGS_wakeup.lds += -P -C - -$(obj)/wakeup.elf: $(obj)/wakeup.lds $(WAKEUP_OBJS) FORCE - $(call if_changed,ld) - -OBJCOPYFLAGS_wakeup.bin := -O binary - -$(obj)/wakeup.bin: $(obj)/wakeup.elf FORCE - $(call if_changed,objcopy) diff --git a/arch/x86/kernel/acpi/realmode/bioscall.S b/arch/x86/kernel/acpi/realmode/bioscall.S deleted file mode 100644 index f51eb0bb56ce..000000000000 --- a/arch/x86/kernel/acpi/realmode/bioscall.S +++ /dev/null @@ -1 +0,0 @@ -#include "../../../boot/bioscall.S" diff --git a/arch/x86/kernel/acpi/realmode/copy.S b/arch/x86/kernel/acpi/realmode/copy.S deleted file mode 100644 index dc59ebee69d8..000000000000 --- a/arch/x86/kernel/acpi/realmode/copy.S +++ /dev/null @@ -1 +0,0 @@ -#include "../../../boot/copy.S" diff --git a/arch/x86/kernel/acpi/realmode/regs.c b/arch/x86/kernel/acpi/realmode/regs.c deleted file mode 100644 index 6206033ba202..000000000000 --- a/arch/x86/kernel/acpi/realmode/regs.c +++ /dev/null @@ -1 +0,0 @@ -#include "../../../boot/regs.c" diff --git a/arch/x86/kernel/acpi/realmode/video-bios.c b/arch/x86/kernel/acpi/realmode/video-bios.c deleted file mode 100644 index 7deabc144a27..000000000000 --- a/arch/x86/kernel/acpi/realmode/video-bios.c +++ /dev/null @@ -1 +0,0 @@ -#include "../../../boot/video-bios.c" diff --git a/arch/x86/kernel/acpi/realmode/video-mode.c b/arch/x86/kernel/acpi/realmode/video-mode.c deleted file mode 100644 index 328ad209f113..000000000000 --- a/arch/x86/kernel/acpi/realmode/video-mode.c +++ /dev/null @@ -1 +0,0 @@ -#include "../../../boot/video-mode.c" diff --git a/arch/x86/kernel/acpi/realmode/video-vesa.c b/arch/x86/kernel/acpi/realmode/video-vesa.c deleted file mode 100644 index 9dbb9672226a..000000000000 --- a/arch/x86/kernel/acpi/realmode/video-vesa.c +++ /dev/null @@ -1 +0,0 @@ -#include "../../../boot/video-vesa.c" diff --git a/arch/x86/kernel/acpi/realmode/video-vga.c b/arch/x86/kernel/acpi/realmode/video-vga.c deleted file mode 100644 index bcc81255f374..000000000000 --- a/arch/x86/kernel/acpi/realmode/video-vga.c +++ /dev/null @@ -1 +0,0 @@ -#include "../../../boot/video-vga.c" diff --git a/arch/x86/kernel/acpi/realmode/wakemain.c b/arch/x86/kernel/acpi/realmode/wakemain.c deleted file mode 100644 index 883962d9eef2..000000000000 --- a/arch/x86/kernel/acpi/realmode/wakemain.c +++ /dev/null @@ -1,81 +0,0 @@ -#include "wakeup.h" -#include "boot.h" - -static void udelay(int loops) -{ - while (loops--) - io_delay(); /* Approximately 1 us */ -} - -static void beep(unsigned int hz) -{ - u8 enable; - - if (!hz) { - enable = 0x00; /* Turn off speaker */ - } else { - u16 div = 1193181/hz; - - outb(0xb6, 0x43); /* Ctr 2, squarewave, load, binary */ - io_delay(); - outb(div, 0x42); /* LSB of counter */ - io_delay(); - outb(div >> 8, 0x42); /* MSB of counter */ - io_delay(); - - enable = 0x03; /* Turn on speaker */ - } - inb(0x61); /* Dummy read of System Control Port B */ - io_delay(); - outb(enable, 0x61); /* Enable timer 2 output to speaker */ - io_delay(); -} - -#define DOT_HZ 880 -#define DASH_HZ 587 -#define US_PER_DOT 125000 - -/* Okay, this is totally silly, but it's kind of fun. */ -static void send_morse(const char *pattern) -{ - char s; - - while ((s = *pattern++)) { - switch (s) { - case '.': - beep(DOT_HZ); - udelay(US_PER_DOT); - beep(0); - udelay(US_PER_DOT); - break; - case '-': - beep(DASH_HZ); - udelay(US_PER_DOT * 3); - beep(0); - udelay(US_PER_DOT); - break; - default: /* Assume it's a space */ - udelay(US_PER_DOT * 3); - break; - } - } -} - -void main(void) -{ - /* Kill machine if structures are wrong */ - if (wakeup_header.real_magic != 0x12345678) - while (1); - - if (wakeup_header.realmode_flags & 4) - send_morse("...-"); - - if (wakeup_header.realmode_flags & 1) - asm volatile("lcallw $0xc000,$3"); - - if (wakeup_header.realmode_flags & 2) { - /* Need to call BIOS */ - probe_cards(0); - set_mode(wakeup_header.video_mode); - } -} diff --git a/arch/x86/kernel/acpi/realmode/wakeup.S b/arch/x86/kernel/acpi/realmode/wakeup.S deleted file mode 100644 index b4fd836e4053..000000000000 --- a/arch/x86/kernel/acpi/realmode/wakeup.S +++ /dev/null @@ -1,170 +0,0 @@ -/* - * ACPI wakeup real mode startup stub - */ -#include -#include -#include -#include -#include -#include "wakeup.h" - - .code16 - .section ".jump", "ax" - .globl _start -_start: - cli - jmp wakeup_code - -/* This should match the structure in wakeup.h */ - .section ".header", "a" - .globl wakeup_header -wakeup_header: -video_mode: .short 0 /* Video mode number */ -pmode_return: .byte 0x66, 0xea /* ljmpl */ - .long 0 /* offset goes here */ - .short __KERNEL_CS -pmode_cr0: .long 0 /* Saved %cr0 */ -pmode_cr3: .long 0 /* Saved %cr3 */ -pmode_cr4: .long 0 /* Saved %cr4 */ -pmode_efer: .quad 0 /* Saved EFER */ -pmode_gdt: .quad 0 -pmode_misc_en: .quad 0 /* Saved MISC_ENABLE MSR */ -pmode_behavior: .long 0 /* Wakeup behavior flags */ -realmode_flags: .long 0 -real_magic: .long 0 -trampoline_segment: .word 0 -_pad1: .byte 0 -wakeup_jmp: .byte 0xea /* ljmpw */ -wakeup_jmp_off: .word 3f -wakeup_jmp_seg: .word 0 -wakeup_gdt: .quad 0, 0, 0 -signature: .long WAKEUP_HEADER_SIGNATURE - - .text - .code16 -wakeup_code: - cld - - /* Apparently some dimwit BIOS programmers don't know how to - program a PM to RM transition, and we might end up here with - junk in the data segment descriptor registers. The only way - to repair that is to go into PM and fix it ourselves... */ - movw $16, %cx - lgdtl %cs:wakeup_gdt - movl %cr0, %eax - orb $X86_CR0_PE, %al - movl %eax, %cr0 - jmp 1f -1: ljmpw $8, $2f -2: - movw %cx, %ds - movw %cx, %es - movw %cx, %ss - movw %cx, %fs - movw %cx, %gs - - andb $~X86_CR0_PE, %al - movl %eax, %cr0 - jmp wakeup_jmp -3: - /* Set up segments */ - movw %cs, %ax - movw %ax, %ds - movw %ax, %es - movw %ax, %ss - lidtl wakeup_idt - - movl $wakeup_stack_end, %esp - - /* Clear the EFLAGS */ - pushl $0 - popfl - - /* Check header signature... */ - movl signature, %eax - cmpl $WAKEUP_HEADER_SIGNATURE, %eax - jne bogus_real_magic - - /* Check we really have everything... */ - movl end_signature, %eax - cmpl $WAKEUP_END_SIGNATURE, %eax - jne bogus_real_magic - - /* Call the C code */ - calll main - - /* Restore MISC_ENABLE before entering protected mode, in case - BIOS decided to clear XD_DISABLE during S3. */ - movl pmode_behavior, %eax - btl $WAKEUP_BEHAVIOR_RESTORE_MISC_ENABLE, %eax - jnc 1f - - movl pmode_misc_en, %eax - movl pmode_misc_en + 4, %edx - movl $MSR_IA32_MISC_ENABLE, %ecx - wrmsr -1: - - /* Do any other stuff... */ - -#ifndef CONFIG_64BIT - /* This could also be done in C code... */ - movl pmode_cr3, %eax - movl %eax, %cr3 - - movl pmode_cr4, %ecx - jecxz 1f - movl %ecx, %cr4 -1: - movl pmode_efer, %eax - movl pmode_efer + 4, %edx - movl %eax, %ecx - orl %edx, %ecx - jz 1f - movl $MSR_EFER, %ecx - wrmsr -1: - - lgdtl pmode_gdt - - /* This really couldn't... */ - movl pmode_cr0, %eax - movl %eax, %cr0 - jmp pmode_return -#else - pushw $0 - pushw trampoline_segment - pushw $0 - lret -#endif - -bogus_real_magic: -1: - hlt - jmp 1b - - .data - .balign 8 - - /* This is the standard real-mode IDT */ -wakeup_idt: - .word 0xffff /* limit */ - .long 0 /* address */ - .word 0 - - .globl HEAP, heap_end -HEAP: - .long wakeup_heap -heap_end: - .long wakeup_stack - - .bss -wakeup_heap: - .space 2048 -wakeup_stack: - .space 2048 -wakeup_stack_end: - - .section ".signature","a" -end_signature: - .long WAKEUP_END_SIGNATURE diff --git a/arch/x86/kernel/acpi/realmode/wakeup.h b/arch/x86/kernel/acpi/realmode/wakeup.h deleted file mode 100644 index 97a29e1430e3..000000000000 --- a/arch/x86/kernel/acpi/realmode/wakeup.h +++ /dev/null @@ -1,48 +0,0 @@ -/* - * Definitions for the wakeup data structure at the head of the - * wakeup code. - */ - -#ifndef ARCH_X86_KERNEL_ACPI_RM_WAKEUP_H -#define ARCH_X86_KERNEL_ACPI_RM_WAKEUP_H - -#ifndef __ASSEMBLY__ -#include - -/* This must match data at wakeup.S */ -struct wakeup_header { - u16 video_mode; /* Video mode number */ - u16 _jmp1; /* ljmpl opcode, 32-bit only */ - u32 pmode_entry; /* Protected mode resume point, 32-bit only */ - u16 _jmp2; /* CS value, 32-bit only */ - u32 pmode_cr0; /* Protected mode cr0 */ - u32 pmode_cr3; /* Protected mode cr3 */ - u32 pmode_cr4; /* Protected mode cr4 */ - u32 pmode_efer_low; /* Protected mode EFER */ - u32 pmode_efer_high; - u64 pmode_gdt; - u32 pmode_misc_en_low; /* Protected mode MISC_ENABLE */ - u32 pmode_misc_en_high; - u32 pmode_behavior; /* Wakeup routine behavior flags */ - u32 realmode_flags; - u32 real_magic; - u16 trampoline_segment; /* segment with trampoline code, 64-bit only */ - u8 _pad1; - u8 wakeup_jmp; - u16 wakeup_jmp_off; - u16 wakeup_jmp_seg; - u64 wakeup_gdt[3]; - u32 signature; /* To check we have correct structure */ -} __attribute__((__packed__)); - -extern struct wakeup_header wakeup_header; -#endif - -#define WAKEUP_HEADER_OFFSET 8 -#define WAKEUP_HEADER_SIGNATURE 0x51ee1111 -#define WAKEUP_END_SIGNATURE 0x65a22c82 - -/* Wakeup behavior bits */ -#define WAKEUP_BEHAVIOR_RESTORE_MISC_ENABLE 0 - -#endif /* ARCH_X86_KERNEL_ACPI_RM_WAKEUP_H */ diff --git a/arch/x86/kernel/acpi/realmode/wakeup.lds.S b/arch/x86/kernel/acpi/realmode/wakeup.lds.S deleted file mode 100644 index d4f8010a5b1b..000000000000 --- a/arch/x86/kernel/acpi/realmode/wakeup.lds.S +++ /dev/null @@ -1,62 +0,0 @@ -/* - * wakeup.ld - * - * Linker script for the real-mode wakeup code - */ -#undef i386 -#include "wakeup.h" - -OUTPUT_FORMAT("elf32-i386", "elf32-i386", "elf32-i386") -OUTPUT_ARCH(i386) -ENTRY(_start) - -SECTIONS -{ - . = 0; - .jump : { - *(.jump) - } = 0x90909090 - - . = WAKEUP_HEADER_OFFSET; - .header : { - *(.header) - } - - . = ALIGN(16); - .text : { - *(.text*) - } = 0x90909090 - - . = ALIGN(16); - .rodata : { - *(.rodata*) - } - - .videocards : { - video_cards = .; - *(.videocards) - video_cards_end = .; - } - - . = ALIGN(16); - .data : { - *(.data*) - } - - . = ALIGN(16); - .bss : { - __bss_start = .; - *(.bss) - __bss_end = .; - } - - .signature : { - *(.signature) - } - - _end = .; - - /DISCARD/ : { - *(.note*) - } -} diff --git a/arch/x86/kernel/acpi/sleep.c b/arch/x86/kernel/acpi/sleep.c index 146a49c763a4..d941b62da4b6 100644 --- a/arch/x86/kernel/acpi/sleep.c +++ b/arch/x86/kernel/acpi/sleep.c @@ -14,8 +14,9 @@ #include #include #include +#include -#include "realmode/wakeup.h" +#include "../../realmode/rm/wakeup/wakeup.h" #include "sleep.h" unsigned long acpi_realmode_flags; @@ -36,13 +37,9 @@ asmlinkage void acpi_enter_s3(void) */ int acpi_suspend_lowlevel(void) { - struct wakeup_header *header; - /* address in low memory of the wakeup routine. */ - char *acpi_realmode; + struct wakeup_header *header = + (struct wakeup_header *) __va(real_mode_header.wakeup_header); - acpi_realmode = TRAMPOLINE_SYM(acpi_wakeup_code); - - header = (struct wakeup_header *)(acpi_realmode + WAKEUP_HEADER_OFFSET); if (header->signature != WAKEUP_HEADER_SIGNATURE) { printk(KERN_ERR "wakeup header does not match\n"); return -EINVAL; @@ -50,27 +47,6 @@ int acpi_suspend_lowlevel(void) header->video_mode = saved_video_mode; - header->wakeup_jmp_seg = acpi_wakeup_address >> 4; - - /* - * Set up the wakeup GDT. We set these up as Big Real Mode, - * that is, with limits set to 4 GB. At least the Lenovo - * Thinkpad X61 is known to need this for the video BIOS - * initialization quirk to work; this is likely to also - * be the case for other laptops or integrated video devices. - */ - - /* GDT[0]: GDT self-pointer */ - header->wakeup_gdt[0] = - (u64)(sizeof(header->wakeup_gdt) - 1) + - ((u64)__pa(&header->wakeup_gdt) << 16); - /* GDT[1]: big real mode-like code segment */ - header->wakeup_gdt[1] = - GDT_ENTRY(0x809b, acpi_wakeup_address, 0xfffff); - /* GDT[2]: big real mode-like data segment */ - header->wakeup_gdt[2] = - GDT_ENTRY(0x8093, acpi_wakeup_address, 0xfffff); - #ifndef CONFIG_64BIT store_gdt((struct desc_ptr *)&header->pmode_gdt); @@ -95,7 +71,6 @@ int acpi_suspend_lowlevel(void) header->pmode_cr3 = (u32)__pa(&initial_page_table); saved_magic = 0x12345678; #else /* CONFIG_64BIT */ - header->trampoline_segment = trampoline_address() >> 4; #ifdef CONFIG_SMP stack_start = (unsigned long)temp_stack + sizeof(temp_stack); early_gdt_descr.address = diff --git a/arch/x86/kernel/acpi/sleep.h b/arch/x86/kernel/acpi/sleep.h index d68677a2a010..5653a5791ec9 100644 --- a/arch/x86/kernel/acpi/sleep.h +++ b/arch/x86/kernel/acpi/sleep.h @@ -2,8 +2,8 @@ * Variables and functions used by the code in sleep.c */ -#include #include +#include extern unsigned long saved_video_mode; extern long saved_magic; diff --git a/arch/x86/kernel/acpi/wakeup_rm.S b/arch/x86/kernel/acpi/wakeup_rm.S deleted file mode 100644 index 63b8ab524f2c..000000000000 --- a/arch/x86/kernel/acpi/wakeup_rm.S +++ /dev/null @@ -1,12 +0,0 @@ -/* - * Wrapper script for the realmode binary as a transport object - * before copying to low memory. - */ -#include - - .section ".x86_trampoline","a" - .balign PAGE_SIZE - .globl acpi_wakeup_code -acpi_wakeup_code: - .incbin "arch/x86/kernel/acpi/realmode/wakeup.bin" - .size acpi_wakeup_code, .-acpi_wakeup_code diff --git a/arch/x86/kernel/head32.c b/arch/x86/kernel/head32.c index 51ff18616d50..c18f59d10101 100644 --- a/arch/x86/kernel/head32.c +++ b/arch/x86/kernel/head32.c @@ -14,7 +14,6 @@ #include #include #include -#include #include #include #include diff --git a/arch/x86/kernel/head64.c b/arch/x86/kernel/head64.c index 3a3b779f41d3..037df57a99ac 100644 --- a/arch/x86/kernel/head64.c +++ b/arch/x86/kernel/head64.c @@ -24,7 +24,6 @@ #include #include #include -#include #include static void __init zap_identity_mappings(void) diff --git a/arch/x86/kernel/mpparse.c b/arch/x86/kernel/mpparse.c index ca470e4c92dc..f44d31157353 100644 --- a/arch/x86/kernel/mpparse.c +++ b/arch/x86/kernel/mpparse.c @@ -27,7 +27,6 @@ #include #include #include -#include #include #include diff --git a/arch/x86/kernel/setup.c b/arch/x86/kernel/setup.c index 56e41242a6b8..7a14fece9cfc 100644 --- a/arch/x86/kernel/setup.c +++ b/arch/x86/kernel/setup.c @@ -73,7 +73,6 @@ #include #include -#include #include #include #include @@ -918,7 +917,6 @@ void __init setup_arch(char **cmdline_p) printk(KERN_DEBUG "initial memory mapped : 0 - %08lx\n", max_pfn_mapped< #include -#include +#include #include #include #include @@ -201,7 +201,8 @@ static int tboot_setup_sleep(void) add_mac_region(e820.map[i].addr, e820.map[i].size); } - tboot->acpi_sinfo.kernel_s3_resume_vector = acpi_wakeup_address; + tboot->acpi_sinfo.kernel_s3_resume_vector = + real_mode_header.wakeup_start; return 0; } diff --git a/arch/x86/kernel/trampoline.c b/arch/x86/kernel/trampoline.c deleted file mode 100644 index a73b61055ad6..000000000000 --- a/arch/x86/kernel/trampoline.c +++ /dev/null @@ -1,42 +0,0 @@ -#include -#include - -#include -#include -#include - -unsigned char *x86_trampoline_base; - -void __init setup_trampolines(void) -{ - phys_addr_t mem; - size_t size = PAGE_ALIGN(x86_trampoline_end - x86_trampoline_start); - - /* Has to be in very low memory so we can execute real-mode AP code. */ - mem = memblock_find_in_range(0, 1<<20, size, PAGE_SIZE); - if (!mem) - panic("Cannot allocate trampoline\n"); - - x86_trampoline_base = __va(mem); - memblock_reserve(mem, size); - - printk(KERN_DEBUG "Base memory trampoline at [%p] %llx size %zu\n", - x86_trampoline_base, (unsigned long long)mem, size); - - memcpy(x86_trampoline_base, x86_trampoline_start, size); -} - -/* - * setup_trampolines() gets called very early, to guarantee the - * availability of low memory. This is before the proper kernel page - * tables are set up, so we cannot set page permissions in that - * function. Thus, we use an arch_initcall instead. - */ -static int __init configure_trampolines(void) -{ - size_t size = PAGE_ALIGN(x86_trampoline_end - x86_trampoline_start); - - set_memory_x((unsigned long)x86_trampoline_base, size >> PAGE_SHIFT); - return 0; -} -arch_initcall(configure_trampolines); diff --git a/arch/x86/kernel/trampoline_32.S b/arch/x86/kernel/trampoline_32.S deleted file mode 100644 index 451c0a7ef7fd..000000000000 --- a/arch/x86/kernel/trampoline_32.S +++ /dev/null @@ -1,83 +0,0 @@ -/* - * - * Trampoline.S Derived from Setup.S by Linus Torvalds - * - * 4 Jan 1997 Michael Chastain: changed to gnu as. - * - * This is only used for booting secondary CPUs in SMP machine - * - * Entry: CS:IP point to the start of our code, we are - * in real mode with no stack, but the rest of the - * trampoline page to make our stack and everything else - * is a mystery. - * - * We jump into arch/x86/kernel/head_32.S. - * - * On entry to trampoline_data, the processor is in real mode - * with 16-bit addressing and 16-bit data. CS has some value - * and IP is zero. Thus, data addresses need to be absolute - * (no relocation) and are taken with regard to r_base. - * - * If you work on this file, check the object module with - * objdump --reloc to make sure there are no relocation - * entries except for: - * - * TYPE VALUE - * R_386_32 startup_32_smp - * R_386_32 boot_gdt - */ - -#include -#include -#include -#include - -#ifdef CONFIG_SMP - - .section ".x86_trampoline","a" - .balign PAGE_SIZE - .code16 - -ENTRY(trampoline_data) -r_base = . - wbinvd # Needed for NUMA-Q should be harmless for others - mov %cs, %ax # Code and data in the same place - mov %ax, %ds - - cli # We should be safe anyway - - movl $0xA5A5A5A5, trampoline_status - r_base - # write marker for master knows we're running - - /* GDT tables in non default location kernel can be beyond 16MB and - * lgdt will not be able to load the address as in real mode default - * operand size is 16bit. Use lgdtl instead to force operand size - * to 32 bit. - */ - - lidtl boot_idt_descr - r_base # load idt with 0, 0 - lgdtl boot_gdt_descr - r_base # load gdt with whatever is appropriate - - xor %ax, %ax - inc %ax # protected mode (PE) bit - lmsw %ax # into protected mode - # flush prefetch and jump to startup_32_smp in arch/i386/kernel/head.S - ljmpl $__BOOT_CS, $(startup_32_smp-__PAGE_OFFSET) - - # These need to be in the same 64K segment as the above; - # hence we don't use the boot_gdt_descr defined in head.S -boot_gdt_descr: - .word __BOOT_DS + 7 # gdt limit - .long boot_gdt - __PAGE_OFFSET # gdt base - -boot_idt_descr: - .word 0 # idt limit = 0 - .long 0 # idt base = 0L - -ENTRY(trampoline_status) - .long 0 - -.globl trampoline_end -trampoline_end: - -#endif /* CONFIG_SMP */ diff --git a/arch/x86/kernel/trampoline_64.S b/arch/x86/kernel/trampoline_64.S deleted file mode 100644 index 09ff51799e96..000000000000 --- a/arch/x86/kernel/trampoline_64.S +++ /dev/null @@ -1,171 +0,0 @@ -/* - * - * Trampoline.S Derived from Setup.S by Linus Torvalds - * - * 4 Jan 1997 Michael Chastain: changed to gnu as. - * 15 Sept 2005 Eric Biederman: 64bit PIC support - * - * Entry: CS:IP point to the start of our code, we are - * in real mode with no stack, but the rest of the - * trampoline page to make our stack and everything else - * is a mystery. - * - * On entry to trampoline_data, the processor is in real mode - * with 16-bit addressing and 16-bit data. CS has some value - * and IP is zero. Thus, data addresses need to be absolute - * (no relocation) and are taken with regard to r_base. - * - * With the addition of trampoline_level4_pgt this code can - * now enter a 64bit kernel that lives at arbitrary 64bit - * physical addresses. - * - * If you work on this file, check the object module with objdump - * --full-contents --reloc to make sure there are no relocation - * entries. - */ - -#include -#include -#include -#include -#include -#include -#include - - .section ".x86_trampoline","a" - .balign PAGE_SIZE - .code16 - -ENTRY(trampoline_data) -r_base = . - cli # We should be safe anyway - wbinvd - mov %cs, %ax # Code and data in the same place - mov %ax, %ds - mov %ax, %es - mov %ax, %ss - - - movl $0xA5A5A5A5, trampoline_status - r_base - # write marker for master knows we're running - - # Setup stack - movw $(trampoline_stack_end - r_base), %sp - - call verify_cpu # Verify the cpu supports long mode - testl %eax, %eax # Check for return code - jnz no_longmode - - mov %cs, %ax - movzx %ax, %esi # Find the 32bit trampoline location - shll $4, %esi - - # Fixup the absolute vectors - leal (startup_32 - r_base)(%esi), %eax - movl %eax, startup_32_vector - r_base - leal (startup_64 - r_base)(%esi), %eax - movl %eax, startup_64_vector - r_base - leal (tgdt - r_base)(%esi), %eax - movl %eax, (tgdt + 2 - r_base) - - /* - * GDT tables in non default location kernel can be beyond 16MB and - * lgdt will not be able to load the address as in real mode default - * operand size is 16bit. Use lgdtl instead to force operand size - * to 32 bit. - */ - - lidtl tidt - r_base # load idt with 0, 0 - lgdtl tgdt - r_base # load gdt with whatever is appropriate - - mov $X86_CR0_PE, %ax # protected mode (PE) bit - lmsw %ax # into protected mode - - # flush prefetch and jump to startup_32 - ljmpl *(startup_32_vector - r_base) - - .code32 - .balign 4 -startup_32: - movl $__KERNEL_DS, %eax # Initialize the %ds segment register - movl %eax, %ds - - movl $X86_CR4_PAE, %eax - movl %eax, %cr4 # Enable PAE mode - - # Setup trampoline 4 level pagetables - leal (trampoline_level4_pgt - r_base)(%esi), %eax - movl %eax, %cr3 - - movl $MSR_EFER, %ecx - movl $(1 << _EFER_LME), %eax # Enable Long Mode - xorl %edx, %edx - wrmsr - - # Enable paging and in turn activate Long Mode - # Enable protected mode - movl $(X86_CR0_PG | X86_CR0_PE), %eax - movl %eax, %cr0 - - /* - * At this point we're in long mode but in 32bit compatibility mode - * with EFER.LME = 1, CS.L = 0, CS.D = 1 (and in turn - * EFER.LMA = 1). Now we want to jump in 64bit mode, to do that we use - * the new gdt/idt that has __KERNEL_CS with CS.L = 1. - */ - ljmp *(startup_64_vector - r_base)(%esi) - - .code64 - .balign 4 -startup_64: - # Now jump into the kernel using virtual addresses - movq $secondary_startup_64, %rax - jmp *%rax - - .code16 -no_longmode: - hlt - jmp no_longmode -#include "verify_cpu.S" - - .balign 4 - # Careful these need to be in the same 64K segment as the above; -tidt: - .word 0 # idt limit = 0 - .word 0, 0 # idt base = 0L - - # Duplicate the global descriptor table - # so the kernel can live anywhere - .balign 4 -tgdt: - .short tgdt_end - tgdt # gdt limit - .long tgdt - r_base - .short 0 - .quad 0x00cf9b000000ffff # __KERNEL32_CS - .quad 0x00af9b000000ffff # __KERNEL_CS - .quad 0x00cf93000000ffff # __KERNEL_DS -tgdt_end: - - .balign 4 -startup_32_vector: - .long startup_32 - r_base - .word __KERNEL32_CS, 0 - - .balign 4 -startup_64_vector: - .long startup_64 - r_base - .word __KERNEL_CS, 0 - - .balign 4 -ENTRY(trampoline_status) - .long 0 - -trampoline_stack: - .org 0x1000 -trampoline_stack_end: -ENTRY(trampoline_level4_pgt) - .quad level3_ident_pgt - __START_KERNEL_map + _KERNPG_TABLE - .fill 510,8,0 - .quad level3_kernel_pgt - __START_KERNEL_map + _KERNPG_TABLE - -ENTRY(trampoline_end) diff --git a/arch/x86/kernel/vmlinux.lds.S b/arch/x86/kernel/vmlinux.lds.S index 0f703f10901a..22a1530146a8 100644 --- a/arch/x86/kernel/vmlinux.lds.S +++ b/arch/x86/kernel/vmlinux.lds.S @@ -197,18 +197,6 @@ SECTIONS INIT_DATA_SECTION(16) - /* - * Code and data for a variety of lowlevel trampolines, to be - * copied into base memory (< 1 MiB) during initialization. - * Since it is copied early, the main copy can be discarded - * afterwards. - */ - .x86_trampoline : AT(ADDR(.x86_trampoline) - LOAD_OFFSET) { - x86_trampoline_start = .; - *(.x86_trampoline) - x86_trampoline_end = .; - } - .x86_cpu_dev.init : AT(ADDR(.x86_cpu_dev.init) - LOAD_OFFSET) { __x86_cpu_dev_start = .; *(.x86_cpu_dev.init) diff --git a/arch/x86/realmode/rm/Makefile b/arch/x86/realmode/rm/Makefile index 56ec64f94e69..2432acb6b04f 100644 --- a/arch/x86/realmode/rm/Makefile +++ b/arch/x86/realmode/rm/Makefile @@ -14,9 +14,13 @@ always := realmode.bin realmode-y += header.o realmode-$(CONFIG_X86_32) += reboot_32.o realmode-y += trampoline_$(BITS).o +realmode-$(CONFIG_ACPI_SLEEP) += wakeup/wakeup.o targets += $(realmode-y) +$(obj)/wakeup/wakeup.o: FORCE + $(Q)$(MAKE) $(build)=$(obj)/wakeup $@ + REALMODE_OBJS = $(addprefix $(obj)/,$(realmode-y)) sed-pasyms := -n -r -e 's/^([0-9a-fA-F]+) [ABCDGRSTVW] (.+)$$/pa_\2 = \2;/p' diff --git a/arch/x86/realmode/rm/header.S b/arch/x86/realmode/rm/header.S index a97900409c61..730b1316c099 100644 --- a/arch/x86/realmode/rm/header.S +++ b/arch/x86/realmode/rm/header.S @@ -26,5 +26,10 @@ ENTRY(real_mode_header) .long pa_startup_64_smp .long pa_level3_ident_pgt .long pa_level3_kernel_pgt +#endif + /* ACPI sleep */ +#ifdef CONFIG_ACPI_SLEEP + .long pa_wakeup_start + .long pa_wakeup_header #endif END(real_mode_header) diff --git a/arch/x86/realmode/rm/realmode.lds.S b/arch/x86/realmode/rm/realmode.lds.S index c5b8a4f31ba3..91b83ea55c37 100644 --- a/arch/x86/realmode/rm/realmode.lds.S +++ b/arch/x86/realmode/rm/realmode.lds.S @@ -25,6 +25,10 @@ SECTIONS .rodata : { *(.rodata) *(.rodata.*) + . = ALIGN(16); + video_cards = .; + *(.videocards) + video_cards_end = .; } . = ALIGN(PAGE_SIZE); diff --git a/arch/x86/realmode/rm/wakeup/.gitignore b/arch/x86/realmode/rm/wakeup/.gitignore new file mode 100644 index 000000000000..58f1f48a58f8 --- /dev/null +++ b/arch/x86/realmode/rm/wakeup/.gitignore @@ -0,0 +1,3 @@ +wakeup.bin +wakeup.elf +wakeup.lds diff --git a/arch/x86/realmode/rm/wakeup/Makefile b/arch/x86/realmode/rm/wakeup/Makefile new file mode 100644 index 000000000000..4c8533240cdd --- /dev/null +++ b/arch/x86/realmode/rm/wakeup/Makefile @@ -0,0 +1,33 @@ +# +# arch/x86/kernel/acpi/realmode/Makefile +# +# This file is subject to the terms and conditions of the GNU General Public +# License. See the file "COPYING" in the main directory of this archive +# for more details. +# + +always := wakeup.o + +wakeup-y += wakeup_asm.o wakemain.o video-mode.o +wakeup-y += copy.o bioscall.o regs.o + +# The link order of the video-*.o modules can matter. In particular, +# video-vga.o *must* be listed first, followed by video-vesa.o. +# Hardware-specific drivers should follow in the order they should be +# probed, and video-bios.o should typically be last. +wakeup-y += video-vga.o +wakeup-y += video-vesa.o +wakeup-y += video-bios.o + +targets += $(wakeup-y) + +WAKEUP_OBJS = $(addprefix $(obj)/,$(wakeup-y)) + +LDFLAGS_wakeup.o := -m elf_i386 -r +$(obj)/wakeup.o: $(WAKEUP_OBJS) FORCE + $(call if_changed,ld) + +bootsrc := $(src)/../../../boot + +ccflags-y += -D_WAKEUP -I$(srctree)/$(bootsrc) +asflags-y += -D_WAKEUP -I$(srctree)/$(bootsrc) diff --git a/arch/x86/realmode/rm/wakeup/bioscall.S b/arch/x86/realmode/rm/wakeup/bioscall.S new file mode 100644 index 000000000000..f51eb0bb56ce --- /dev/null +++ b/arch/x86/realmode/rm/wakeup/bioscall.S @@ -0,0 +1 @@ +#include "../../../boot/bioscall.S" diff --git a/arch/x86/realmode/rm/wakeup/copy.S b/arch/x86/realmode/rm/wakeup/copy.S new file mode 100644 index 000000000000..dc59ebee69d8 --- /dev/null +++ b/arch/x86/realmode/rm/wakeup/copy.S @@ -0,0 +1 @@ +#include "../../../boot/copy.S" diff --git a/arch/x86/realmode/rm/wakeup/regs.c b/arch/x86/realmode/rm/wakeup/regs.c new file mode 100644 index 000000000000..6206033ba202 --- /dev/null +++ b/arch/x86/realmode/rm/wakeup/regs.c @@ -0,0 +1 @@ +#include "../../../boot/regs.c" diff --git a/arch/x86/realmode/rm/wakeup/video-bios.c b/arch/x86/realmode/rm/wakeup/video-bios.c new file mode 100644 index 000000000000..7deabc144a27 --- /dev/null +++ b/arch/x86/realmode/rm/wakeup/video-bios.c @@ -0,0 +1 @@ +#include "../../../boot/video-bios.c" diff --git a/arch/x86/realmode/rm/wakeup/video-mode.c b/arch/x86/realmode/rm/wakeup/video-mode.c new file mode 100644 index 000000000000..328ad209f113 --- /dev/null +++ b/arch/x86/realmode/rm/wakeup/video-mode.c @@ -0,0 +1 @@ +#include "../../../boot/video-mode.c" diff --git a/arch/x86/realmode/rm/wakeup/video-vesa.c b/arch/x86/realmode/rm/wakeup/video-vesa.c new file mode 100644 index 000000000000..9dbb9672226a --- /dev/null +++ b/arch/x86/realmode/rm/wakeup/video-vesa.c @@ -0,0 +1 @@ +#include "../../../boot/video-vesa.c" diff --git a/arch/x86/realmode/rm/wakeup/video-vga.c b/arch/x86/realmode/rm/wakeup/video-vga.c new file mode 100644 index 000000000000..bcc81255f374 --- /dev/null +++ b/arch/x86/realmode/rm/wakeup/video-vga.c @@ -0,0 +1 @@ +#include "../../../boot/video-vga.c" diff --git a/arch/x86/realmode/rm/wakeup/wakemain.c b/arch/x86/realmode/rm/wakeup/wakemain.c new file mode 100644 index 000000000000..91405d515ec6 --- /dev/null +++ b/arch/x86/realmode/rm/wakeup/wakemain.c @@ -0,0 +1,82 @@ +#include "wakeup.h" +#include "boot.h" + +static void udelay(int loops) +{ + while (loops--) + io_delay(); /* Approximately 1 us */ +} + +static void beep(unsigned int hz) +{ + u8 enable; + + if (!hz) { + enable = 0x00; /* Turn off speaker */ + } else { + u16 div = 1193181/hz; + + outb(0xb6, 0x43); /* Ctr 2, squarewave, load, binary */ + io_delay(); + outb(div, 0x42); /* LSB of counter */ + io_delay(); + outb(div >> 8, 0x42); /* MSB of counter */ + io_delay(); + + enable = 0x03; /* Turn on speaker */ + } + inb(0x61); /* Dummy read of System Control Port B */ + io_delay(); + outb(enable, 0x61); /* Enable timer 2 output to speaker */ + io_delay(); +} + +#define DOT_HZ 880 +#define DASH_HZ 587 +#define US_PER_DOT 125000 + +/* Okay, this is totally silly, but it's kind of fun. */ +static void send_morse(const char *pattern) +{ + char s; + + while ((s = *pattern++)) { + switch (s) { + case '.': + beep(DOT_HZ); + udelay(US_PER_DOT); + beep(0); + udelay(US_PER_DOT); + break; + case '-': + beep(DASH_HZ); + udelay(US_PER_DOT * 3); + beep(0); + udelay(US_PER_DOT); + break; + default: /* Assume it's a space */ + udelay(US_PER_DOT * 3); + break; + } + } +} + +void main(void) +{ + /* Kill machine if structures are wrong */ + if (wakeup_header.real_magic != 0x12345678) + while (1) + ; + + if (wakeup_header.realmode_flags & 4) + send_morse("...-"); + + if (wakeup_header.realmode_flags & 1) + asm volatile("lcallw $0xc000,$3"); + + if (wakeup_header.realmode_flags & 2) { + /* Need to call BIOS */ + probe_cards(0); + set_mode(wakeup_header.video_mode); + } +} diff --git a/arch/x86/realmode/rm/wakeup/wakeup.h b/arch/x86/realmode/rm/wakeup/wakeup.h new file mode 100644 index 000000000000..2dfaf06b8af1 --- /dev/null +++ b/arch/x86/realmode/rm/wakeup/wakeup.h @@ -0,0 +1,41 @@ +/* + * Definitions for the wakeup data structure at the head of the + * wakeup code. + */ + +#ifndef ARCH_X86_KERNEL_ACPI_RM_WAKEUP_H +#define ARCH_X86_KERNEL_ACPI_RM_WAKEUP_H + +#ifndef __ASSEMBLY__ +#include + +/* This must match data at wakeup.S */ +struct wakeup_header { + u16 video_mode; /* Video mode number */ + u32 pmode_entry; /* Protected mode resume point, 32-bit only */ + u16 pmode_cs; + u32 pmode_cr0; /* Protected mode cr0 */ + u32 pmode_cr3; /* Protected mode cr3 */ + u32 pmode_cr4; /* Protected mode cr4 */ + u32 pmode_efer_low; /* Protected mode EFER */ + u32 pmode_efer_high; + u64 pmode_gdt; + u32 pmode_misc_en_low; /* Protected mode MISC_ENABLE */ + u32 pmode_misc_en_high; + u32 pmode_behavior; /* Wakeup routine behavior flags */ + u32 realmode_flags; + u32 real_magic; + u32 signature; /* To check we have correct structure */ +} __attribute__((__packed__)); + +extern struct wakeup_header wakeup_header; +#endif + +#define WAKEUP_HEADER_OFFSET 8 +#define WAKEUP_HEADER_SIGNATURE 0x51ee1111 +#define WAKEUP_END_SIGNATURE 0x65a22c82 + +/* Wakeup behavior bits */ +#define WAKEUP_BEHAVIOR_RESTORE_MISC_ENABLE 0 + +#endif /* ARCH_X86_KERNEL_ACPI_RM_WAKEUP_H */ diff --git a/arch/x86/realmode/rm/wakeup/wakeup_asm.S b/arch/x86/realmode/rm/wakeup/wakeup_asm.S new file mode 100644 index 000000000000..b61126cb599e --- /dev/null +++ b/arch/x86/realmode/rm/wakeup/wakeup_asm.S @@ -0,0 +1,189 @@ +/* + * ACPI wakeup real mode startup stub + */ +#include +#include +#include +#include +#include +#include "wakeup.h" + + .code16 + +/* This should match the structure in wakeup.h */ + .section ".data", "aw" + .globl wakeup_header +wakeup_header: +video_mode: .short 0 /* Video mode number */ +pmode_entry: .long 0 +pmode_cs: .short __KERNEL_CS +pmode_cr0: .long 0 /* Saved %cr0 */ +pmode_cr3: .long 0 /* Saved %cr3 */ +pmode_cr4: .long 0 /* Saved %cr4 */ +pmode_efer: .quad 0 /* Saved EFER */ +pmode_gdt: .quad 0 +pmode_misc_en: .quad 0 /* Saved MISC_ENABLE MSR */ +pmode_behavior: .long 0 /* Wakeup behavior flags */ +realmode_flags: .long 0 +real_magic: .long 0 +signature: .long WAKEUP_HEADER_SIGNATURE + .size wakeup_header, .-wakeup_header + + .text + .code16 + .globl wakeup_start +wakeup_start: + cli + cld + + .byte 0xea /* ljmpw */ + .word 3f + .word real_mode_seg +3: + /* Apparently some dimwit BIOS programmers don't know how to + program a PM to RM transition, and we might end up here with + junk in the data segment descriptor registers. The only way + to repair that is to go into PM and fix it ourselves... */ + movw $16, %cx + lgdtl %cs:wakeup_gdt + movl %cr0, %eax + orb $X86_CR0_PE, %al + movl %eax, %cr0 + ljmpw $8, $2f +2: + movw %cx, %ds + movw %cx, %es + movw %cx, %ss + movw %cx, %fs + movw %cx, %gs + + andb $~X86_CR0_PE, %al + movl %eax, %cr0 + .byte 0xea /* ljmpw */ + .word 3f + .word real_mode_seg +3: + /* Set up segments */ + movw %cs, %ax + movw %ax, %ds + movw %ax, %es + movw %ax, %ss + lidtl wakeup_idt + + movl $wakeup_stack_end, %esp + + /* Clear the EFLAGS */ + pushl $0 + popfl + + /* Check header signature... */ + movl signature, %eax + cmpl $WAKEUP_HEADER_SIGNATURE, %eax + jne bogus_real_magic + + /* Check we really have everything... */ + movl end_signature, %eax + cmpl $WAKEUP_END_SIGNATURE, %eax + jne bogus_real_magic + + /* Call the C code */ + calll main + + /* Restore MISC_ENABLE before entering protected mode, in case + BIOS decided to clear XD_DISABLE during S3. */ + movl pmode_behavior, %eax + btl $WAKEUP_BEHAVIOR_RESTORE_MISC_ENABLE, %eax + jnc 1f + + movl pmode_misc_en, %eax + movl pmode_misc_en + 4, %edx + movl $MSR_IA32_MISC_ENABLE, %ecx + wrmsr +1: + + /* Do any other stuff... */ + +#ifndef CONFIG_64BIT + /* This could also be done in C code... */ + movl pmode_cr3, %eax + movl %eax, %cr3 + + movl pmode_cr4, %ecx + jecxz 1f + movl %ecx, %cr4 +1: + movl pmode_efer, %eax + movl pmode_efer + 4, %edx + movl %eax, %ecx + orl %edx, %ecx + jz 1f + movl $MSR_EFER, %ecx + wrmsr +1: + + lgdtl pmode_gdt + + /* This really couldn't... */ + movl pmode_cr0, %eax + movl %eax, %cr0 + ljmpl *pmode_entry +#else + jmp trampoline_data +#endif + +bogus_real_magic: +1: + hlt + jmp 1b + + .section ".rodata","a" + + /* + * Set up the wakeup GDT. We set these up as Big Real Mode, + * that is, with limits set to 4 GB. At least the Lenovo + * Thinkpad X61 is known to need this for the video BIOS + * initialization quirk to work; this is likely to also + * be the case for other laptops or integrated video devices. + */ + + .globl wakeup_gdt + .balign 16 +wakeup_gdt: + .word 3*8-1 /* Self-descriptor */ + .long pa_wakeup_gdt + .word 0 + + .word 0xffff /* 16-bit code segment @ real_mode_base */ + .long 0x9b000000 + pa_real_mode_base + .word 0x008f /* big real mode */ + + .word 0xffff /* 16-bit data segment @ real_mode_base */ + .long 0x93000000 + pa_real_mode_base + .word 0x008f /* big real mode */ + .size wakeup_gdt, .-wakeup_gdt + + .data + .balign 8 + + /* This is the standard real-mode IDT */ +wakeup_idt: + .word 0xffff /* limit */ + .long 0 /* address */ + .word 0 + + .globl HEAP, heap_end +HEAP: + .long wakeup_heap +heap_end: + .long wakeup_stack + + .bss +wakeup_heap: + .space 2048 +wakeup_stack: + .space 2048 +wakeup_stack_end: + + .section ".signature","a" +end_signature: + .long WAKEUP_END_SIGNATURE diff --git a/drivers/acpi/sleep.c b/drivers/acpi/sleep.c index eb6fd233764b..e77aa4a1c9f6 100644 --- a/drivers/acpi/sleep.c +++ b/drivers/acpi/sleep.c @@ -25,6 +25,8 @@ #include #include +#include + #include "internal.h" #include "sleep.h" @@ -91,13 +93,13 @@ static struct notifier_block tts_notifier = { static int acpi_sleep_prepare(u32 acpi_state) { #ifdef CONFIG_ACPI_SLEEP + unsigned long wakeup_pa = real_mode_header.wakeup_start; /* do we have a wakeup address for S2 and S3? */ if (acpi_state == ACPI_STATE_S3) { - if (!acpi_wakeup_address) { + if (!wakeup_pa) return -EFAULT; - } acpi_set_firmware_waking_vector( - (acpi_physical_address)acpi_wakeup_address); + (acpi_physical_address)wakeup_pa); } ACPI_FLUSH_CPU_CACHE(); -- cgit v1.2.3 From b429dbf6e866bd6dadb56fae66f61f611cde57ff Mon Sep 17 00:00:00 2001 From: Jarkko Sakkinen Date: Tue, 8 May 2012 21:22:41 +0300 Subject: x86, realmode: don't copy real_mode_header Replaced copying of real_mode_header with a pointer to beginning of RM memory. Signed-off-by: Jarkko Sakkinen Link: http://lkml.kernel.org/r/1336501366-28617-19-git-send-email-jarkko.sakkinen@intel.com Signed-off-by: H. Peter Anvin --- arch/x86/include/asm/realmode.h | 5 ++-- arch/x86/kernel/acpi/sleep.c | 2 +- arch/x86/kernel/realmode.c | 57 ++++++++++++++++--------------------- arch/x86/kernel/reboot.c | 2 +- arch/x86/kernel/smpboot.c | 4 +-- arch/x86/kernel/tboot.c | 2 +- arch/x86/realmode/rm/header.S | 1 - arch/x86/realmode/rm/realmode.lds.S | 1 - arch/x86/realmode/rmpiggy.S | 2 ++ drivers/acpi/sleep.c | 2 +- 10 files changed, 35 insertions(+), 43 deletions(-) (limited to 'drivers/acpi/sleep.c') diff --git a/arch/x86/include/asm/realmode.h b/arch/x86/include/asm/realmode.h index 1bfc74d213a4..d3ae49f4c3ef 100644 --- a/arch/x86/include/asm/realmode.h +++ b/arch/x86/include/asm/realmode.h @@ -8,7 +8,6 @@ struct real_mode_header { u32 text_start; u32 ro_end; - u32 end; /* reboot */ #ifdef CONFIG_X86_32 u32 machine_real_restart_asm; @@ -30,8 +29,8 @@ struct real_mode_header { #endif } __attribute__((__packed__)); -extern struct real_mode_header real_mode_header; -extern unsigned char *real_mode_base; +extern struct real_mode_header *real_mode_header; +extern unsigned char real_mode_blob_end[]; extern unsigned long init_rsp; extern unsigned long initial_code; diff --git a/arch/x86/kernel/acpi/sleep.c b/arch/x86/kernel/acpi/sleep.c index d941b62da4b6..6ca3f54ebe7d 100644 --- a/arch/x86/kernel/acpi/sleep.c +++ b/arch/x86/kernel/acpi/sleep.c @@ -38,7 +38,7 @@ asmlinkage void acpi_enter_s3(void) int acpi_suspend_lowlevel(void) { struct wakeup_header *header = - (struct wakeup_header *) __va(real_mode_header.wakeup_header); + (struct wakeup_header *) __va(real_mode_header->wakeup_header); if (header->signature != WAKEUP_HEADER_SIGNATURE) { printk(KERN_ERR "wakeup header does not match\n"); diff --git a/arch/x86/kernel/realmode.c b/arch/x86/kernel/realmode.c index e7bf82a409bf..632c810ec8ea 100644 --- a/arch/x86/kernel/realmode.c +++ b/arch/x86/kernel/realmode.c @@ -5,8 +5,7 @@ #include #include -unsigned char *real_mode_base; -struct real_mode_header real_mode_header; +struct real_mode_header *real_mode_header; void __init setup_real_mode(void) { @@ -17,33 +16,32 @@ void __init setup_real_mode(void) u32 *ptr; u16 *seg; int i; + unsigned char *base; - struct real_mode_header *header = - (struct real_mode_header *) real_mode_blob; - - size_t size = PAGE_ALIGN(header->end); + size_t size = PAGE_ALIGN(real_mode_blob_end - real_mode_blob); /* Has to be in very low memory so we can execute real-mode AP code. */ mem = memblock_find_in_range(0, 1<<20, size, PAGE_SIZE); if (!mem) panic("Cannot allocate trampoline\n"); - real_mode_base = __va(mem); + base = __va(mem); memblock_reserve(mem, size); + real_mode_header = (struct real_mode_header *) base; printk(KERN_DEBUG "Base memory trampoline at [%p] %llx size %zu\n", - real_mode_base, (unsigned long long)mem, size); + base, (unsigned long long)mem, size); - memcpy(real_mode_base, real_mode_blob, size); + memcpy(base, real_mode_blob, size); - real_mode_seg = __pa(real_mode_base) >> 4; + real_mode_seg = __pa(base) >> 4; rel = (u32 *) real_mode_relocs; /* 16-bit segment relocations. */ count = rel[0]; rel = &rel[1]; for (i = 0; i < count; i++) { - seg = (u16 *) (real_mode_base + rel[i]); + seg = (u16 *) (base + rel[i]); *seg = real_mode_seg; } @@ -51,25 +49,21 @@ void __init setup_real_mode(void) count = rel[i]; rel = &rel[i + 1]; for (i = 0; i < count; i++) { - ptr = (u32 *) (real_mode_base + rel[i]); - *ptr += __pa(real_mode_base); + ptr = (u32 *) (base + rel[i]); + *ptr += __pa(base); } - /* Copied header will contain relocated physical addresses. */ - memcpy(&real_mode_header, real_mode_base, - sizeof(struct real_mode_header)); - #ifdef CONFIG_X86_32 - *((u32 *)__va(real_mode_header.startup_32_smp)) = __pa(startup_32_smp); - *((u32 *)__va(real_mode_header.boot_gdt)) = __pa(boot_gdt); + *((u32 *)__va(real_mode_header->startup_32_smp)) = __pa(startup_32_smp); + *((u32 *)__va(real_mode_header->boot_gdt)) = __pa(boot_gdt); #else - *((u64 *) __va(real_mode_header.startup_64_smp)) = + *((u64 *) __va(real_mode_header->startup_64_smp)) = (u64)secondary_startup_64; - *((u64 *) __va(real_mode_header.level3_ident_pgt)) = + *((u64 *) __va(real_mode_header->level3_ident_pgt)) = __pa(level3_ident_pgt) + _KERNPG_TABLE; - *((u64 *) __va(real_mode_header.level3_kernel_pgt)) = + *((u64 *) __va(real_mode_header->level3_kernel_pgt)) = __pa(level3_kernel_pgt) + _KERNPG_TABLE; #endif } @@ -82,23 +76,22 @@ void __init setup_real_mode(void) */ static int __init set_real_mode_permissions(void) { - size_t all_size = - PAGE_ALIGN(real_mode_header.end) - - __pa(real_mode_base); + unsigned char *base = (unsigned char *) real_mode_header; + size_t size = PAGE_ALIGN(real_mode_blob_end - real_mode_blob); size_t ro_size = - PAGE_ALIGN(real_mode_header.ro_end) - - __pa(real_mode_base); + PAGE_ALIGN(real_mode_header->ro_end) - + __pa(base); size_t text_size = - PAGE_ALIGN(real_mode_header.ro_end) - - real_mode_header.text_start; + PAGE_ALIGN(real_mode_header->ro_end) - + real_mode_header->text_start; unsigned long text_start = - (unsigned long) __va(real_mode_header.text_start); + (unsigned long) __va(real_mode_header->text_start); - set_memory_nx((unsigned long) real_mode_base, all_size >> PAGE_SHIFT); - set_memory_ro((unsigned long) real_mode_base, ro_size >> PAGE_SHIFT); + set_memory_nx((unsigned long) base, size >> PAGE_SHIFT); + set_memory_ro((unsigned long) base, ro_size >> PAGE_SHIFT); set_memory_x((unsigned long) text_start, text_size >> PAGE_SHIFT); return 0; diff --git a/arch/x86/kernel/reboot.c b/arch/x86/kernel/reboot.c index 050eff29a4bb..658f856f09a3 100644 --- a/arch/x86/kernel/reboot.c +++ b/arch/x86/kernel/reboot.c @@ -336,7 +336,7 @@ core_initcall(reboot_init); void machine_real_restart(unsigned int type) { void (*restart_lowmem)(unsigned int) = (void (*)(unsigned int)) - real_mode_header.machine_real_restart_asm; + real_mode_header->machine_real_restart_asm; local_irq_disable(); diff --git a/arch/x86/kernel/smpboot.c b/arch/x86/kernel/smpboot.c index c7971ea74bd0..b8c0661e2341 100644 --- a/arch/x86/kernel/smpboot.c +++ b/arch/x86/kernel/smpboot.c @@ -665,9 +665,9 @@ static void __cpuinit announce_cpu(int cpu, int apicid) static int __cpuinit do_boot_cpu(int apicid, int cpu) { volatile u32 *trampoline_status = - (volatile u32 *) __va(real_mode_header.trampoline_status); + (volatile u32 *) __va(real_mode_header->trampoline_status); /* start_ip had better be page-aligned! */ - unsigned long start_ip = real_mode_header.trampoline_data; + unsigned long start_ip = real_mode_header->trampoline_data; unsigned long boot_error = 0; int timeout; diff --git a/arch/x86/kernel/tboot.c b/arch/x86/kernel/tboot.c index c136e2325062..65adda4fde93 100644 --- a/arch/x86/kernel/tboot.c +++ b/arch/x86/kernel/tboot.c @@ -202,7 +202,7 @@ static int tboot_setup_sleep(void) } tboot->acpi_sinfo.kernel_s3_resume_vector = - real_mode_header.wakeup_start; + real_mode_header->wakeup_start; return 0; } diff --git a/arch/x86/realmode/rm/header.S b/arch/x86/realmode/rm/header.S index a91ec8f6b15f..c83005c4d455 100644 --- a/arch/x86/realmode/rm/header.S +++ b/arch/x86/realmode/rm/header.S @@ -12,7 +12,6 @@ GLOBAL(real_mode_header) .long pa_text_start .long pa_ro_end - .long pa_end #ifdef CONFIG_X86_32 .long pa_machine_real_restart_asm #endif diff --git a/arch/x86/realmode/rm/realmode.lds.S b/arch/x86/realmode/rm/realmode.lds.S index 4d4afcaf5f02..86b2e8d6b1f1 100644 --- a/arch/x86/realmode/rm/realmode.lds.S +++ b/arch/x86/realmode/rm/realmode.lds.S @@ -65,7 +65,6 @@ SECTIONS .signature : { *(.signature) } - pa_end = .; /DISCARD/ : { *(.note*) diff --git a/arch/x86/realmode/rmpiggy.S b/arch/x86/realmode/rmpiggy.S index fd72a99d12ae..204c6ece0e97 100644 --- a/arch/x86/realmode/rmpiggy.S +++ b/arch/x86/realmode/rmpiggy.S @@ -13,6 +13,8 @@ GLOBAL(real_mode_blob) .incbin "arch/x86/realmode/rm/realmode.bin" END(real_mode_blob) +GLOBAL(real_mode_blob_end); + GLOBAL(real_mode_relocs) .incbin "arch/x86/realmode/rm/realmode.relocs" END(real_mode_relocs) diff --git a/drivers/acpi/sleep.c b/drivers/acpi/sleep.c index e77aa4a1c9f6..06139005c4dd 100644 --- a/drivers/acpi/sleep.c +++ b/drivers/acpi/sleep.c @@ -93,7 +93,7 @@ static struct notifier_block tts_notifier = { static int acpi_sleep_prepare(u32 acpi_state) { #ifdef CONFIG_ACPI_SLEEP - unsigned long wakeup_pa = real_mode_header.wakeup_start; + unsigned long wakeup_pa = real_mode_header->wakeup_start; /* do we have a wakeup address for S2 and S3? */ if (acpi_state == ACPI_STATE_S3) { if (!wakeup_pa) -- cgit v1.2.3 From c10d7a13846bffa5c77f1122500b687ab902e2d2 Mon Sep 17 00:00:00 2001 From: Daniel Drake Date: Thu, 10 May 2012 00:08:43 +0100 Subject: ACPI / PM: Generate wakeup events on fixed power button When the system is woken up by the ACPI fixed power button, currently there is no way of userspace becoming aware that the power button was pressed. OLPC would like to know this, so that we can respond appropriately. For example, if the system was woken up by a network packet, we know we can go back to sleep very quickly. But if the user explicitly woke the system with the power button, we're going to want to stay awake for a while. The wakeup count mechanism seems like a good fit for communicating this. Mark the fixed power button as wakeup-enabled, and increment its wakeup counter when the system is woken with the power button. (The wakeup counter is also incremented when the power button is pressed during system operation; this is already handled by an existing acpi-button codepath). Signed-off-by: Daniel Drake Acked-by: Zhang Rui Signed-off-by: Rafael J. Wysocki --- drivers/acpi/scan.c | 1 + drivers/acpi/sleep.c | 45 +++++++++++++++++++++++++++++++++++++++++++-- 2 files changed, 44 insertions(+), 2 deletions(-) (limited to 'drivers/acpi/sleep.c') diff --git a/drivers/acpi/scan.c b/drivers/acpi/scan.c index 85cbfdccc97c..c8a1f3b68110 100644 --- a/drivers/acpi/scan.c +++ b/drivers/acpi/scan.c @@ -1567,6 +1567,7 @@ static int acpi_bus_scan_fixed(void) ACPI_BUS_TYPE_POWER_BUTTON, ACPI_STA_DEFAULT, &ops); + device_init_wakeup(&device->dev, true); } if ((acpi_gbl_FADT.flags & ACPI_FADT_SLEEP_BUTTON) == 0) { diff --git a/drivers/acpi/sleep.c b/drivers/acpi/sleep.c index eb6fd233764b..a564fc3ffa1c 100644 --- a/drivers/acpi/sleep.c +++ b/drivers/acpi/sleep.c @@ -57,6 +57,7 @@ MODULE_PARM_DESC(gts, "Enable evaluation of _GTS on suspend."); MODULE_PARM_DESC(bfs, "Enable evaluation of _BFS on resume".); static u8 sleep_states[ACPI_S_STATE_COUNT]; +static bool pwr_btn_event_pending; static void acpi_sleep_tts_switch(u32 acpi_state) { @@ -186,6 +187,14 @@ static int acpi_pm_prepare(void) return error; } +static int find_powerf_dev(struct device *dev, void *data) +{ + struct acpi_device *device = to_acpi_device(dev); + const char *hid = acpi_device_hid(device); + + return !strcmp(hid, ACPI_BUTTON_HID_POWERF); +} + /** * acpi_pm_finish - Instruct the platform to leave a sleep state. * @@ -194,6 +203,7 @@ static int acpi_pm_prepare(void) */ static void acpi_pm_finish(void) { + struct device *pwr_btn_dev; u32 acpi_state = acpi_target_sleep_state; acpi_ec_unblock_transactions(); @@ -211,6 +221,23 @@ static void acpi_pm_finish(void) acpi_set_firmware_waking_vector((acpi_physical_address) 0); acpi_target_sleep_state = ACPI_STATE_S0; + + /* If we were woken with the fixed power button, provide a small + * hint to userspace in the form of a wakeup event on the fixed power + * button device (if it can be found). + * + * We delay the event generation til now, as the PM layer requires + * timekeeping to be running before we generate events. */ + if (!pwr_btn_event_pending) + return; + + pwr_btn_event_pending = false; + pwr_btn_dev = bus_find_device(&acpi_bus_type, NULL, NULL, + find_powerf_dev); + if (pwr_btn_dev) { + pm_wakeup_event(pwr_btn_dev, 0); + put_device(pwr_btn_dev); + } } /** @@ -300,9 +327,23 @@ static int acpi_suspend_enter(suspend_state_t pm_state) /* ACPI 3.0 specs (P62) says that it's the responsibility * of the OSPM to clear the status bit [ implying that the * POWER_BUTTON event should not reach userspace ] + * + * However, we do generate a small hint for userspace in the form of + * a wakeup event. We flag this condition for now and generate the + * event later, as we're currently too early in resume to be able to + * generate wakeup events. */ - if (ACPI_SUCCESS(status) && (acpi_state == ACPI_STATE_S3)) - acpi_clear_event(ACPI_EVENT_POWER_BUTTON); + if (ACPI_SUCCESS(status) && (acpi_state == ACPI_STATE_S3)) { + acpi_event_status pwr_btn_status; + + acpi_get_event_status(ACPI_EVENT_POWER_BUTTON, &pwr_btn_status); + + if (pwr_btn_status & ACPI_EVENT_FLAG_SET) { + acpi_clear_event(ACPI_EVENT_POWER_BUTTON); + /* Flag for later */ + pwr_btn_event_pending = true; + } + } /* * Disable and clear GPE status before interrupt is enabled. Some GPEs -- cgit v1.2.3 From dbe9a2edd17d843d80faf2b99f20a691c1853418 Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Tue, 29 May 2012 21:21:07 +0200 Subject: ACPI / PM: Make acpi_pm_device_sleep_state() follow the specification The comparison between the system sleep state being entered and the lowest system sleep state the given device may wake up from in acpi_pm_device_sleep_state() is reversed, because the specification (ACPI 5.0) says that for wakeup to work: "The sleeping state being entered must be less than or equal to the power state declared in element 1 of the _PRW object." In other words, the state returned by _PRW is the deepest (lowest-power) system sleep state the device is capable of waking up the system from. Moreover, acpi_pm_device_sleep_state() also should check if the wakeup capability is supported through ACPI, because in principle it may be done via native PCIe PME, for example, in which case _SxW should not be evaluated. Signed-off-by: Rafael J. Wysocki --- drivers/acpi/sleep.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers/acpi/sleep.c') diff --git a/drivers/acpi/sleep.c b/drivers/acpi/sleep.c index a564fc3ffa1c..d8b381e94ee2 100644 --- a/drivers/acpi/sleep.c +++ b/drivers/acpi/sleep.c @@ -773,8 +773,8 @@ int acpi_pm_device_sleep_state(struct device *dev, int *d_min_p) * can wake the system. _S0W may be valid, too. */ if (acpi_target_sleep_state == ACPI_STATE_S0 || - (device_may_wakeup(dev) && - adev->wakeup.sleep_state <= acpi_target_sleep_state)) { + (device_may_wakeup(dev) && adev->wakeup.flags.valid && + adev->wakeup.sleep_state >= acpi_target_sleep_state)) { acpi_status status; acpi_method[3] = 'W'; -- cgit v1.2.3 From 319b6ffc6df892e4ccffff823cc5521a4a5d2dca Mon Sep 17 00:00:00 2001 From: "H. Peter Anvin" Date: Wed, 30 May 2012 12:33:41 +0300 Subject: x86, realmode: Unbreak the ia64 build of drivers/acpi/sleep.c Revert usage of acpi_wakeup_address and move definition to x86 architecture code in order to make compilation work in ia64. [jsakkine: tested compilation in ia64/x86-64 and added proper commit message] Reported-by: Paul Gortmaker Originally-by: H. Peter Anvin Signed-off-by: Jarkko Sakkinen Link: http://lkml.kernel.org/r/1338370421-27735-1-git-send-email-jarkko.sakkinen@intel.com Cc: Tony Luck Cc: Len Brown Signed-off-by: H. Peter Anvin --- arch/x86/include/asm/acpi.h | 7 +++---- drivers/acpi/sleep.c | 8 ++------ 2 files changed, 5 insertions(+), 10 deletions(-) (limited to 'drivers/acpi/sleep.c') diff --git a/arch/x86/include/asm/acpi.h b/arch/x86/include/asm/acpi.h index 724aa441de7d..0c44630d1789 100644 --- a/arch/x86/include/asm/acpi.h +++ b/arch/x86/include/asm/acpi.h @@ -29,6 +29,7 @@ #include #include #include +#include #define COMPILER_DEPENDENT_INT64 long long #define COMPILER_DEPENDENT_UINT64 unsigned long long @@ -116,10 +117,8 @@ static inline void acpi_disable_pci(void) /* Low-level suspend routine. */ extern int acpi_suspend_lowlevel(void); -extern const unsigned char acpi_wakeup_code[]; - -/* early initialization routine */ -extern void acpi_reserve_wakeup_memory(void); +/* Physical address to resume after wakeup */ +#define acpi_wakeup_address ((unsigned long)(real_mode_header->wakeup_start)) /* * Check if the CPU can handle C2 and deeper diff --git a/drivers/acpi/sleep.c b/drivers/acpi/sleep.c index ebaa04593236..74ee4ab577b6 100644 --- a/drivers/acpi/sleep.c +++ b/drivers/acpi/sleep.c @@ -25,8 +25,6 @@ #include #include -#include - #include "internal.h" #include "sleep.h" @@ -93,13 +91,11 @@ static struct notifier_block tts_notifier = { static int acpi_sleep_prepare(u32 acpi_state) { #ifdef CONFIG_ACPI_SLEEP - unsigned long wakeup_pa = real_mode_header->wakeup_start; /* do we have a wakeup address for S2 and S3? */ if (acpi_state == ACPI_STATE_S3) { - if (!wakeup_pa) + if (!acpi_wakeup_address) return -EFAULT; - acpi_set_firmware_waking_vector( - (acpi_physical_address)wakeup_pa); + acpi_set_firmware_waking_vector(acpi_wakeup_address); } ACPI_FLUSH_CPU_CACHE(); -- cgit v1.2.3