From 97f7f8189fe54e3cfe324ef9ad35064f3d2d3bff Mon Sep 17 00:00:00 2001 From: Robert Richter Date: Mon, 10 Oct 2011 16:21:10 +0200 Subject: oprofile, x86: Fix crash when unloading module (nmi timer mode) If oprofile uses the nmi timer interrupt there is a crash while unloading the module. The bug can be triggered with oprofile build as module and kernel parameter nolapic set. This patch fixes this. oprofile: using NMI timer interrupt. BUG: unable to handle kernel NULL pointer dereference at 0000000000000008 IP: [] unregister_syscore_ops+0x41/0x58 PGD 42dbca067 PUD 41da6a067 PMD 0 Oops: 0002 [#1] PREEMPT SMP CPU 5 Modules linked in: oprofile(-) [last unloaded: oprofile] Pid: 2518, comm: modprobe Not tainted 3.1.0-rc7-00019-gb2fb49d #19 Advanced Micro Device Anaheim/Anaheim RIP: 0010:[] [] unregister_syscore_ops+0x41/0x58 RSP: 0018:ffff88041ef71e98 EFLAGS: 00010296 RAX: 0000000000000000 RBX: ffffffffa0017100 RCX: dead000000200200 RDX: 0000000000000000 RSI: dead000000100100 RDI: ffffffff8178c620 RBP: ffff88041ef71ea8 R08: 0000000000000001 R09: 0000000000000082 R10: 0000000000000000 R11: ffff88041ef71de8 R12: 0000000000000080 R13: fffffffffffffff5 R14: 0000000000000001 R15: 0000000000610210 FS: 00007fc902f20700(0000) GS:ffff88042fd40000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b CR2: 0000000000000008 CR3: 000000041cdb6000 CR4: 00000000000006e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Process modprobe (pid: 2518, threadinfo ffff88041ef70000, task ffff88041d348040) Stack: ffff88041ef71eb8 ffffffffa0017790 ffff88041ef71eb8 ffffffffa0013532 ffff88041ef71ec8 ffffffffa00132d6 ffff88041ef71ed8 ffffffffa00159b2 ffff88041ef71f78 ffffffff81073115 656c69666f72706f 0000000000610200 Call Trace: [] op_nmi_exit+0x15/0x17 [oprofile] [] oprofile_arch_exit+0xe/0x10 [oprofile] [] oprofile_exit+0x1e/0x20 [oprofile] [] sys_delete_module+0x1c3/0x22f [] ? trace_hardirqs_on_thunk+0x3a/0x3f [] system_call_fastpath+0x16/0x1b Code: 20 c6 78 81 e8 c5 cc 23 00 48 8b 13 48 8b 43 08 48 be 00 01 10 00 00 00 ad de 48 b9 00 02 20 00 00 00 ad de 48 c7 c7 20 c6 78 81 89 42 08 48 89 10 48 89 33 48 89 4b 08 e8 a6 c0 23 00 5a 5b RIP [] unregister_syscore_ops+0x41/0x58 RSP CR2: 0000000000000008 ---[ end trace 43a541a52956b7b0 ]--- CC: stable@kernel.org # 2.6.37+ Signed-off-by: Robert Richter --- arch/x86/oprofile/init.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/x86/oprofile/init.c b/arch/x86/oprofile/init.c index cdfe4c54deca..f148cf652678 100644 --- a/arch/x86/oprofile/init.c +++ b/arch/x86/oprofile/init.c @@ -21,6 +21,7 @@ extern int op_nmi_timer_init(struct oprofile_operations *ops); extern void op_nmi_exit(void); extern void x86_backtrace(struct pt_regs * const regs, unsigned int depth); +static int nmi_timer; int __init oprofile_arch_init(struct oprofile_operations *ops) { @@ -31,8 +32,9 @@ int __init oprofile_arch_init(struct oprofile_operations *ops) #ifdef CONFIG_X86_LOCAL_APIC ret = op_nmi_init(ops); #endif + nmi_timer = (ret != 0); #ifdef CONFIG_X86_IO_APIC - if (ret < 0) + if (nmi_timer) ret = op_nmi_timer_init(ops); #endif ops->backtrace = x86_backtrace; @@ -44,6 +46,7 @@ int __init oprofile_arch_init(struct oprofile_operations *ops) void oprofile_arch_exit(void) { #ifdef CONFIG_X86_LOCAL_APIC - op_nmi_exit(); + if (!nmi_timer) + op_nmi_exit(); #endif } -- cgit v1.2.1 From 5698eb4eda657fd4a74612a65cd5d583f35a5bdb Mon Sep 17 00:00:00 2001 From: Kevin Hilman Date: Mon, 7 Nov 2011 15:58:40 -0800 Subject: ARM: OMAP3: CPUidle: include The CPUidle use THIS_MODULE, so needs Signed-off-by: Kevin Hilman Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/cpuidle34xx.c | 1 + 1 file changed, 1 insertion(+) (limited to 'arch') diff --git a/arch/arm/mach-omap2/cpuidle34xx.c b/arch/arm/mach-omap2/cpuidle34xx.c index 4bf6e6e8b100..2e0fa5a4aaeb 100644 --- a/arch/arm/mach-omap2/cpuidle34xx.c +++ b/arch/arm/mach-omap2/cpuidle34xx.c @@ -24,6 +24,7 @@ #include #include +#include #include #include -- cgit v1.2.1 From 1258ea596fe0422272525d9ec8a25b703de4623f Mon Sep 17 00:00:00 2001 From: Tomi Valkeinen Date: Tue, 8 Nov 2011 03:16:09 -0700 Subject: ARM: OMAP2xxx: HWMOD: Fix DSS reset DSS needs all DSS clocks to be enabled to be able to finish reset properly. Before v3.1-rc1 the omapdss driver was managing clocks and resets correctly. However, when omapdss started using runtime PM at v3.1-rc1, the responsibility for the reset moved to HWMOD framework. HWMOD framework does not currently enable all the DSS clocks when resetting the DSS hardware. This hasn't caused any problems so far, but we may just have been lucky. This patch sets HWMOD_CONTROL_OPT_CLKS_IN_RESET for dss_core in OMAP2xxx HWMOD data, fixing the issue. Signed-off-by: Tomi Valkeinen [paul@pwsan.com: merged duplicate .flags fields] Signed-off-by: Paul Walmsley --- arch/arm/mach-omap2/omap_hwmod_2420_data.c | 6 +++++- arch/arm/mach-omap2/omap_hwmod_2430_data.c | 6 +++++- 2 files changed, 10 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-omap2/omap_hwmod_2420_data.c b/arch/arm/mach-omap2/omap_hwmod_2420_data.c index 6d7206213525..5160e3509d5d 100644 --- a/arch/arm/mach-omap2/omap_hwmod_2420_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_2420_data.c @@ -875,6 +875,10 @@ static struct omap_hwmod_ocp_if *omap2420_dss_slaves[] = { }; static struct omap_hwmod_opt_clk dss_opt_clks[] = { + /* + * The DSS HW needs all DSS clocks enabled during reset. The dss_core + * driver does not use these clocks. + */ { .role = "tv_clk", .clk = "dss_54m_fck" }, { .role = "sys_clk", .clk = "dss2_fck" }, }; @@ -899,7 +903,7 @@ static struct omap_hwmod omap2420_dss_core_hwmod = { .slaves_cnt = ARRAY_SIZE(omap2420_dss_slaves), .masters = omap2420_dss_masters, .masters_cnt = ARRAY_SIZE(omap2420_dss_masters), - .flags = HWMOD_NO_IDLEST, + .flags = HWMOD_NO_IDLEST | HWMOD_CONTROL_OPT_CLKS_IN_RESET, }; /* l4_core -> dss_dispc */ diff --git a/arch/arm/mach-omap2/omap_hwmod_2430_data.c b/arch/arm/mach-omap2/omap_hwmod_2430_data.c index a2580d01c3ff..d02a44ea7f9b 100644 --- a/arch/arm/mach-omap2/omap_hwmod_2430_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_2430_data.c @@ -942,6 +942,10 @@ static struct omap_hwmod_ocp_if *omap2430_dss_slaves[] = { }; static struct omap_hwmod_opt_clk dss_opt_clks[] = { + /* + * The DSS HW needs all DSS clocks enabled during reset. The dss_core + * driver does not use these clocks. + */ { .role = "tv_clk", .clk = "dss_54m_fck" }, { .role = "sys_clk", .clk = "dss2_fck" }, }; @@ -966,7 +970,7 @@ static struct omap_hwmod omap2430_dss_core_hwmod = { .slaves_cnt = ARRAY_SIZE(omap2430_dss_slaves), .masters = omap2430_dss_masters, .masters_cnt = ARRAY_SIZE(omap2430_dss_masters), - .flags = HWMOD_NO_IDLEST, + .flags = HWMOD_NO_IDLEST | HWMOD_CONTROL_OPT_CLKS_IN_RESET, }; /* l4_core -> dss_dispc */ -- cgit v1.2.1 From b8ac10d8b75843c9ddd6aadf70a0cdf8aa783659 Mon Sep 17 00:00:00 2001 From: Tomi Valkeinen Date: Tue, 8 Nov 2011 03:16:09 -0700 Subject: ARM: OMAP2xxx: HWMOD: fix DSS clock data The OMAP2xxx HWMOD data currently contains two errors with DSS clocks: - dss_rfbi is missing ick opt-clock, which is needed for RFBI to calculate timings - dss_venc's interface and main clocks are wrong, causing VENC to fail to start These problems were temporarily fixed with a DSS patch 9ede365aa6f74428a1f69c21ca1cf21213167576 ("HACK: OMAP: DSS2: clk hack for OMAP2/3"), which can be reverted after this patch (and the similar patches for other OMAPs). Signed-off-by: Tomi Valkeinen Signed-off-by: Paul Walmsley --- arch/arm/mach-omap2/omap_hwmod_2420_data.c | 10 ++++++++-- arch/arm/mach-omap2/omap_hwmod_2430_data.c | 10 ++++++++-- 2 files changed, 16 insertions(+), 4 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-omap2/omap_hwmod_2420_data.c b/arch/arm/mach-omap2/omap_hwmod_2420_data.c index 5160e3509d5d..74037a5807af 100644 --- a/arch/arm/mach-omap2/omap_hwmod_2420_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_2420_data.c @@ -965,6 +965,10 @@ static struct omap_hwmod_ocp_if *omap2420_dss_rfbi_slaves[] = { &omap2420_l4_core__dss_rfbi, }; +static struct omap_hwmod_opt_clk dss_rfbi_opt_clks[] = { + { .role = "ick", .clk = "dss_ick" }, +}; + static struct omap_hwmod omap2420_dss_rfbi_hwmod = { .name = "dss_rfbi", .class = &omap2_rfbi_hwmod_class, @@ -976,6 +980,8 @@ static struct omap_hwmod omap2420_dss_rfbi_hwmod = { .module_offs = CORE_MOD, }, }, + .opt_clks = dss_rfbi_opt_clks, + .opt_clks_cnt = ARRAY_SIZE(dss_rfbi_opt_clks), .slaves = omap2420_dss_rfbi_slaves, .slaves_cnt = ARRAY_SIZE(omap2420_dss_rfbi_slaves), .flags = HWMOD_NO_IDLEST, @@ -985,7 +991,7 @@ static struct omap_hwmod omap2420_dss_rfbi_hwmod = { static struct omap_hwmod_ocp_if omap2420_l4_core__dss_venc = { .master = &omap2420_l4_core_hwmod, .slave = &omap2420_dss_venc_hwmod, - .clk = "dss_54m_fck", + .clk = "dss_ick", .addr = omap2_dss_venc_addrs, .fw = { .omap2 = { @@ -1005,7 +1011,7 @@ static struct omap_hwmod_ocp_if *omap2420_dss_venc_slaves[] = { static struct omap_hwmod omap2420_dss_venc_hwmod = { .name = "dss_venc", .class = &omap2_venc_hwmod_class, - .main_clk = "dss1_fck", + .main_clk = "dss_54m_fck", .prcm = { .omap2 = { .prcm_reg_id = 1, diff --git a/arch/arm/mach-omap2/omap_hwmod_2430_data.c b/arch/arm/mach-omap2/omap_hwmod_2430_data.c index d02a44ea7f9b..6f0365388dfc 100644 --- a/arch/arm/mach-omap2/omap_hwmod_2430_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_2430_data.c @@ -1020,6 +1020,10 @@ static struct omap_hwmod_ocp_if *omap2430_dss_rfbi_slaves[] = { &omap2430_l4_core__dss_rfbi, }; +static struct omap_hwmod_opt_clk dss_rfbi_opt_clks[] = { + { .role = "ick", .clk = "dss_ick" }, +}; + static struct omap_hwmod omap2430_dss_rfbi_hwmod = { .name = "dss_rfbi", .class = &omap2_rfbi_hwmod_class, @@ -1031,6 +1035,8 @@ static struct omap_hwmod omap2430_dss_rfbi_hwmod = { .module_offs = CORE_MOD, }, }, + .opt_clks = dss_rfbi_opt_clks, + .opt_clks_cnt = ARRAY_SIZE(dss_rfbi_opt_clks), .slaves = omap2430_dss_rfbi_slaves, .slaves_cnt = ARRAY_SIZE(omap2430_dss_rfbi_slaves), .flags = HWMOD_NO_IDLEST, @@ -1040,7 +1046,7 @@ static struct omap_hwmod omap2430_dss_rfbi_hwmod = { static struct omap_hwmod_ocp_if omap2430_l4_core__dss_venc = { .master = &omap2430_l4_core_hwmod, .slave = &omap2430_dss_venc_hwmod, - .clk = "dss_54m_fck", + .clk = "dss_ick", .addr = omap2_dss_venc_addrs, .flags = OCPIF_SWSUP_IDLE, .user = OCP_USER_MPU | OCP_USER_SDMA, @@ -1054,7 +1060,7 @@ static struct omap_hwmod_ocp_if *omap2430_dss_venc_slaves[] = { static struct omap_hwmod omap2430_dss_venc_hwmod = { .name = "dss_venc", .class = &omap2_venc_hwmod_class, - .main_clk = "dss1_fck", + .main_clk = "dss_54m_fck", .prcm = { .omap2 = { .prcm_reg_id = 1, -- cgit v1.2.1 From 8c3105ca1a42783b13930fbd375484ec8c72e608 Mon Sep 17 00:00:00 2001 From: Tomi Valkeinen Date: Tue, 8 Nov 2011 03:16:10 -0700 Subject: ARM: OMAP3: HWMOD: Fix DSS reset DSS needs all DSS clocks to be enabled to be able to finish reset properly. Before v3.1-rc1 the omapdss driver was managing clocks and resets correctly. However, when omapdss started using runtime PM at v3.1-rc1, the responsibility for the reset moved to HWMOD framework. HWMOD framework does not currently enable all the DSS clocks when resetting the DSS hardware. This hasn't caused any problems so far, but we may just have been lucky. dss_core's opt-clocks is also missing dss_96m_fck, which is a DSS clock present only on OMAP3430, and thus required on OMAP3430 to finish the reset. This patch sets HWMOD_CONTROL_OPT_CLKS_IN_RESET and adds the dss_96m_fck opt-clock for dss_core in OMAP3 HWMOD data, fixing the issue. Signed-off-by: Tomi Valkeinen [paul@pwsan.com: merged duplicate .flags fields] Signed-off-by: Paul Walmsley --- arch/arm/mach-omap2/omap_hwmod_3xxx_data.c | 12 +++++++++--- 1 file changed, 9 insertions(+), 3 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c index bc9035ec87fc..45ccd4f07cff 100644 --- a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c @@ -1369,9 +1369,14 @@ static struct omap_hwmod_ocp_if *omap3xxx_dss_slaves[] = { }; static struct omap_hwmod_opt_clk dss_opt_clks[] = { - { .role = "tv_clk", .clk = "dss_tv_fck" }, - { .role = "video_clk", .clk = "dss_96m_fck" }, + /* + * The DSS HW needs all DSS clocks enabled during reset. The dss_core + * driver does not use these clocks. + */ { .role = "sys_clk", .clk = "dss2_alwon_fck" }, + { .role = "tv_clk", .clk = "dss_tv_fck" }, + /* required only on OMAP3430 */ + { .role = "tv_dac_clk", .clk = "dss_96m_fck" }, }; static struct omap_hwmod omap3430es1_dss_core_hwmod = { @@ -1394,11 +1399,12 @@ static struct omap_hwmod omap3430es1_dss_core_hwmod = { .slaves_cnt = ARRAY_SIZE(omap3430es1_dss_slaves), .masters = omap3xxx_dss_masters, .masters_cnt = ARRAY_SIZE(omap3xxx_dss_masters), - .flags = HWMOD_NO_IDLEST, + .flags = HWMOD_NO_IDLEST | HWMOD_CONTROL_OPT_CLKS_IN_RESET, }; static struct omap_hwmod omap3xxx_dss_core_hwmod = { .name = "dss_core", + .flags = HWMOD_CONTROL_OPT_CLKS_IN_RESET, .class = &omap2_dss_hwmod_class, .main_clk = "dss1_alwon_fck", /* instead of dss_fck */ .sdma_reqs = omap3xxx_dss_sdma_chs, -- cgit v1.2.1 From 6c3d7e34d68ffae888d33bf364f447e0b415591f Mon Sep 17 00:00:00 2001 From: Tomi Valkeinen Date: Tue, 8 Nov 2011 03:16:10 -0700 Subject: ARM: OMAP3: HWMOD: fix DSS clock data The OMAP3 HWMOD data currently contains these errors with DSS clocks: - dss_rfbi is missing ick opt-clock, which is needed for RFBI to calculate timings - dss_dsi is missing ick and sys_clk - dss_venc is missing dss_96m_fck opt-clock, which is required on OMAP3430 - dss_venc's interface and main clocks are wrong, causing VENC to fail to start These problems were temporarily fixed with a DSS patch 9ede365aa6f74428a1f69c21ca1cf21213167576 ("HACK: OMAP: DSS2: clk hack for OMAP2/3"), which can be reverted after this patch (and the similar patches for other OMAPs). Signed-off-by: Tomi Valkeinen Signed-off-by: Paul Walmsley --- arch/arm/mach-omap2/omap_hwmod_3xxx_data.c | 24 ++++++++++++++++++++++-- 1 file changed, 22 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c index 45ccd4f07cff..4aaf0caaf3cc 100644 --- a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c @@ -1492,6 +1492,7 @@ static struct omap_hwmod_addr_space omap3xxx_dss_dsi1_addrs[] = { static struct omap_hwmod_ocp_if omap3xxx_l4_core__dss_dsi1 = { .master = &omap3xxx_l4_core_hwmod, .slave = &omap3xxx_dss_dsi1_hwmod, + .clk = "dss_ick", .addr = omap3xxx_dss_dsi1_addrs, .fw = { .omap2 = { @@ -1508,6 +1509,10 @@ static struct omap_hwmod_ocp_if *omap3xxx_dss_dsi1_slaves[] = { &omap3xxx_l4_core__dss_dsi1, }; +static struct omap_hwmod_opt_clk dss_dsi1_opt_clks[] = { + { .role = "sys_clk", .clk = "dss2_alwon_fck" }, +}; + static struct omap_hwmod omap3xxx_dss_dsi1_hwmod = { .name = "dss_dsi1", .class = &omap3xxx_dsi_hwmod_class, @@ -1520,6 +1525,8 @@ static struct omap_hwmod omap3xxx_dss_dsi1_hwmod = { .module_offs = OMAP3430_DSS_MOD, }, }, + .opt_clks = dss_dsi1_opt_clks, + .opt_clks_cnt = ARRAY_SIZE(dss_dsi1_opt_clks), .slaves = omap3xxx_dss_dsi1_slaves, .slaves_cnt = ARRAY_SIZE(omap3xxx_dss_dsi1_slaves), .flags = HWMOD_NO_IDLEST, @@ -1546,6 +1553,10 @@ static struct omap_hwmod_ocp_if *omap3xxx_dss_rfbi_slaves[] = { &omap3xxx_l4_core__dss_rfbi, }; +static struct omap_hwmod_opt_clk dss_rfbi_opt_clks[] = { + { .role = "ick", .clk = "dss_ick" }, +}; + static struct omap_hwmod omap3xxx_dss_rfbi_hwmod = { .name = "dss_rfbi", .class = &omap2_rfbi_hwmod_class, @@ -1557,6 +1568,8 @@ static struct omap_hwmod omap3xxx_dss_rfbi_hwmod = { .module_offs = OMAP3430_DSS_MOD, }, }, + .opt_clks = dss_rfbi_opt_clks, + .opt_clks_cnt = ARRAY_SIZE(dss_rfbi_opt_clks), .slaves = omap3xxx_dss_rfbi_slaves, .slaves_cnt = ARRAY_SIZE(omap3xxx_dss_rfbi_slaves), .flags = HWMOD_NO_IDLEST, @@ -1566,7 +1579,7 @@ static struct omap_hwmod omap3xxx_dss_rfbi_hwmod = { static struct omap_hwmod_ocp_if omap3xxx_l4_core__dss_venc = { .master = &omap3xxx_l4_core_hwmod, .slave = &omap3xxx_dss_venc_hwmod, - .clk = "dss_tv_fck", + .clk = "dss_ick", .addr = omap2_dss_venc_addrs, .fw = { .omap2 = { @@ -1584,10 +1597,15 @@ static struct omap_hwmod_ocp_if *omap3xxx_dss_venc_slaves[] = { &omap3xxx_l4_core__dss_venc, }; +static struct omap_hwmod_opt_clk dss_venc_opt_clks[] = { + /* required only on OMAP3430 */ + { .role = "tv_dac_clk", .clk = "dss_96m_fck" }, +}; + static struct omap_hwmod omap3xxx_dss_venc_hwmod = { .name = "dss_venc", .class = &omap2_venc_hwmod_class, - .main_clk = "dss1_alwon_fck", + .main_clk = "dss_tv_fck", .prcm = { .omap2 = { .prcm_reg_id = 1, @@ -1595,6 +1613,8 @@ static struct omap_hwmod omap3xxx_dss_venc_hwmod = { .module_offs = OMAP3430_DSS_MOD, }, }, + .opt_clks = dss_venc_opt_clks, + .opt_clks_cnt = ARRAY_SIZE(dss_venc_opt_clks), .slaves = omap3xxx_dss_venc_slaves, .slaves_cnt = ARRAY_SIZE(omap3xxx_dss_venc_slaves), .flags = HWMOD_NO_IDLEST, -- cgit v1.2.1 From 4247878efca76143aa015ed1142652056052abb8 Mon Sep 17 00:00:00 2001 From: Tomi Valkeinen Date: Tue, 8 Nov 2011 03:16:11 -0700 Subject: ARM: OMAP4: HWMOD: remove extra clocks Remove the dss_dss_clk from dss_core's opt-clocks. dss_dss_clk already defined as the dss main_clk, and thus is not needed as an opt-clock. Remove opt-clocks for dss_dispc, as dispc only uses the main_clk. Signed-off-by: Tomi Valkeinen Signed-off-by: Paul Walmsley --- arch/arm/mach-omap2/omap_hwmod_44xx_data.c | 9 --------- 1 file changed, 9 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c index 7695e5d43316..3b9f2d9f1471 100644 --- a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c @@ -1240,7 +1240,6 @@ static struct omap_hwmod_ocp_if *omap44xx_dss_slaves[] = { static struct omap_hwmod_opt_clk dss_opt_clks[] = { { .role = "sys_clk", .clk = "dss_sys_clk" }, { .role = "tv_clk", .clk = "dss_tv_clk" }, - { .role = "dss_clk", .clk = "dss_dss_clk" }, { .role = "video_clk", .clk = "dss_48mhz_clk" }, }; @@ -1340,12 +1339,6 @@ static struct omap_hwmod_ocp_if *omap44xx_dss_dispc_slaves[] = { &omap44xx_l4_per__dss_dispc, }; -static struct omap_hwmod_opt_clk dss_dispc_opt_clks[] = { - { .role = "sys_clk", .clk = "dss_sys_clk" }, - { .role = "tv_clk", .clk = "dss_tv_clk" }, - { .role = "hdmi_clk", .clk = "dss_48mhz_clk" }, -}; - static struct omap_hwmod omap44xx_dss_dispc_hwmod = { .name = "dss_dispc", .class = &omap44xx_dispc_hwmod_class, @@ -1359,8 +1352,6 @@ static struct omap_hwmod omap44xx_dss_dispc_hwmod = { .context_offs = OMAP4_RM_DSS_DSS_CONTEXT_OFFSET, }, }, - .opt_clks = dss_dispc_opt_clks, - .opt_clks_cnt = ARRAY_SIZE(dss_dispc_opt_clks), .slaves = omap44xx_dss_dispc_slaves, .slaves_cnt = ARRAY_SIZE(omap44xx_dss_dispc_slaves), }; -- cgit v1.2.1 From 37ad085527860397438f27c81a2cb13272378458 Mon Sep 17 00:00:00 2001 From: Tomi Valkeinen Date: Tue, 8 Nov 2011 03:16:11 -0700 Subject: ARM: OMAP4: HWMOD: Add HWMOD_CONTROL_OPT_CLKS_IN_RESET for dss_core DSS needs all DSS clocks to be enabled to be able to finish reset properly. Before v3.1-rc1 the omapdss driver was managing clocks and resets correctly. However, when omapdss started using runtime PM at v3.1-rc1, the responsibility for the reset moved to HWMOD framework. HWMOD framework does not currently enable all the DSS clocks when resetting the DSS hardware. This causes the HWMOD frameworks boot-time reset to fail, possibly leaving the DSS hardware in undefined state. This patch sets HWMOD_CONTROL_OPT_CLKS_IN_RESET for dss_core. The flag is actually not used on OMAP4, because dss_core hardware does not have soft-reset functionality and thus the HWMOD framework never resets nor waits for the reset to finish. However, while the flag is not strictly needed currently, I think it represents the HW correctly: all the DSS clocks should be enabled after power-on to allow DSS hardware to finish its reset. A custom reset function will be added in the following patches which manages this correctly for OMAP4. Signed-off-by: Tomi Valkeinen Signed-off-by: Paul Walmsley --- arch/arm/mach-omap2/omap_hwmod_44xx_data.c | 1 + 1 file changed, 1 insertion(+) (limited to 'arch') diff --git a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c index 3b9f2d9f1471..b82720abf210 100644 --- a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c @@ -1245,6 +1245,7 @@ static struct omap_hwmod_opt_clk dss_opt_clks[] = { static struct omap_hwmod omap44xx_dss_hwmod = { .name = "dss_core", + .flags = HWMOD_CONTROL_OPT_CLKS_IN_RESET, .class = &omap44xx_dss_hwmod_class, .clkdm_name = "l3_dss_clkdm", .main_clk = "dss_dss_clk", -- cgit v1.2.1 From 4d0698d98f501b86d3bef38c46a54a702e0469a0 Mon Sep 17 00:00:00 2001 From: Tomi Valkeinen Date: Tue, 8 Nov 2011 03:16:12 -0700 Subject: ARM: OMAP4: HWMOD: fix DSS clock data The OMAP4 HWMOD data currently contains errors with DSS clocks: dss_hdmi and dss_venc have their main_clks wrong. The clocks should be dss_48mhz_clk and dss_tv_clk, respectively. These problems were temporarily fixed with the DSS patches 9ede365aa6f74428a1f69c21ca1cf21213167576 ("HACK: OMAP: DSS2: clk hack for OMAP2/3"), and df5d3ed23cf73ee0763a8963003bda9b69d9620f ("OMAP: DSS2: HDMI: fix hdmi clock name"), which can be reverted after this patch. Signed-off-by: Tomi Valkeinen Signed-off-by: Paul Walmsley --- arch/arm/mach-omap2/omap_hwmod_44xx_data.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c index b82720abf210..cadf0bb2d3b7 100644 --- a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c @@ -1240,7 +1240,7 @@ static struct omap_hwmod_ocp_if *omap44xx_dss_slaves[] = { static struct omap_hwmod_opt_clk dss_opt_clks[] = { { .role = "sys_clk", .clk = "dss_sys_clk" }, { .role = "tv_clk", .clk = "dss_tv_clk" }, - { .role = "video_clk", .clk = "dss_48mhz_clk" }, + { .role = "hdmi_clk", .clk = "dss_48mhz_clk" }, }; static struct omap_hwmod omap44xx_dss_hwmod = { @@ -1616,7 +1616,7 @@ static struct omap_hwmod omap44xx_dss_hdmi_hwmod = { .clkdm_name = "l3_dss_clkdm", .mpu_irqs = omap44xx_dss_hdmi_irqs, .sdma_reqs = omap44xx_dss_hdmi_sdma_reqs, - .main_clk = "dss_dss_clk", + .main_clk = "dss_48mhz_clk", .prcm = { .omap4 = { .clkctrl_offs = OMAP4_CM_DSS_DSS_CLKCTRL_OFFSET, @@ -1777,7 +1777,7 @@ static struct omap_hwmod omap44xx_dss_venc_hwmod = { .name = "dss_venc", .class = &omap44xx_venc_hwmod_class, .clkdm_name = "l3_dss_clkdm", - .main_clk = "dss_dss_clk", + .main_clk = "dss_tv_clk", .prcm = { .omap4 = { .clkctrl_offs = OMAP4_CM_DSS_DSS_CLKCTRL_OFFSET, -- cgit v1.2.1 From 3ce32676bb355420ceeda57b73dd84df0ff5ad6f Mon Sep 17 00:00:00 2001 From: Tomi Valkeinen Date: Tue, 8 Nov 2011 03:16:12 -0700 Subject: ARM: OMAP2/3: HWMOD: Add SYSS_HAS_RESET_STATUS for dss OMAP2/3 dss_core has a reset status flag in sysstatus register. Add SYSS_HAS_RESET_STATUS flag to HWMOD data so it can be used. Signed-off-by: Tomi Valkeinen Signed-off-by: Paul Walmsley --- arch/arm/mach-omap2/omap_hwmod_2xxx_3xxx_ipblock_data.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/mach-omap2/omap_hwmod_2xxx_3xxx_ipblock_data.c b/arch/arm/mach-omap2/omap_hwmod_2xxx_3xxx_ipblock_data.c index c451729d289a..d78c1324ae59 100644 --- a/arch/arm/mach-omap2/omap_hwmod_2xxx_3xxx_ipblock_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_2xxx_3xxx_ipblock_data.c @@ -43,7 +43,8 @@ static struct omap_hwmod_class_sysconfig omap2_dss_sysc = { .rev_offs = 0x0000, .sysc_offs = 0x0010, .syss_offs = 0x0014, - .sysc_flags = (SYSC_HAS_SOFTRESET | SYSC_HAS_AUTOIDLE), + .sysc_flags = (SYSC_HAS_SOFTRESET | SYSC_HAS_AUTOIDLE | + SYSS_HAS_RESET_STATUS), .sysc_fields = &omap_hwmod_sysc_type1, }; -- cgit v1.2.1 From 13662dc5b177d68885695ef513dd4ae0e4d2a099 Mon Sep 17 00:00:00 2001 From: Tomi Valkeinen Date: Tue, 8 Nov 2011 03:16:13 -0700 Subject: ARM: OMAP: HWMOD: Unify DSS resets for OMAPs This patch adds a custom DSS reset function used on OMAPs from OMAP2 forward. The function doesn't actually do a reset, it only waits for the reset to complete. The reason for this is that on OMAP4 there is no possibility to do a SW reset, and on OMAP2/3 doing a SW reset for dss_core resets all the other DSS modules also, thus breaking the HWMOD model where every DSS module is handled independently. This fixes the problem with DSS reset on OMAP4, caused by the fact that because there's no SW reset for dss_core on OMAP4, the HWMOD framework doesn't try to reset dss_core and thus the DSS clocks were never enabled at the same time. This causes causes the HWMOD reset to fail for dss_dispc and dss_rfbi. The common reset function will also allow us to fix another problem in the future: before doing a reset we need to disable DSS outputs, which are in some cases enabled by the bootloader, as otherwise DSS HW seems to get more or less stuck, requiring a power reset to recover. Signed-off-by: Tomi Valkeinen [paul@pwsan.com: modified to build arch/arm/mach-omap2/display.o unconditionally to avoid an error when !CONFIG_OMAP2_DSS] Signed-off-by: Paul Walmsley --- arch/arm/mach-omap2/Makefile | 5 +--- arch/arm/mach-omap2/display.c | 35 ++++++++++++++++++++++ .../mach-omap2/omap_hwmod_2xxx_3xxx_ipblock_data.c | 2 ++ arch/arm/mach-omap2/omap_hwmod_44xx_data.c | 2 ++ arch/arm/plat-omap/include/plat/common.h | 3 ++ 5 files changed, 43 insertions(+), 4 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile index 69ab1c069134..b009f17dee56 100644 --- a/arch/arm/mach-omap2/Makefile +++ b/arch/arm/mach-omap2/Makefile @@ -4,7 +4,7 @@ # Common support obj-y := id.o io.o control.o mux.o devices.o serial.o gpmc.o timer.o pm.o \ - common.o gpio.o dma.o wd_timer.o + common.o gpio.o dma.o wd_timer.o display.o omap-2-3-common = irq.o sdrc.o hwmod-common = omap_hwmod.o \ @@ -264,7 +264,4 @@ smsc911x-$(CONFIG_SMSC911X) := gpmc-smsc911x.o obj-y += $(smsc911x-m) $(smsc911x-y) obj-$(CONFIG_ARCH_OMAP4) += hwspinlock.o -disp-$(CONFIG_OMAP2_DSS) := display.o -obj-y += $(disp-m) $(disp-y) - obj-y += common-board-devices.o twl-common.o diff --git a/arch/arm/mach-omap2/display.c b/arch/arm/mach-omap2/display.c index adb2756e242f..941b5459707f 100644 --- a/arch/arm/mach-omap2/display.c +++ b/arch/arm/mach-omap2/display.c @@ -27,6 +27,7 @@ #include #include #include +#include #include "control.h" @@ -172,3 +173,37 @@ int __init omap_display_init(struct omap_dss_board_info *board_data) return r; } + +#define MAX_MODULE_SOFTRESET_WAIT 10000 +int omap_dss_reset(struct omap_hwmod *oh) +{ + struct omap_hwmod_opt_clk *oc; + int c = 0; + int i, r; + + if (!(oh->class->sysc->sysc_flags & SYSS_HAS_RESET_STATUS)) { + pr_err("dss_core: hwmod data doesn't contain reset data\n"); + return -EINVAL; + } + + for (i = oh->opt_clks_cnt, oc = oh->opt_clks; i > 0; i--, oc++) + if (oc->_clk) + clk_enable(oc->_clk); + + omap_test_timeout((omap_hwmod_read(oh, oh->class->sysc->syss_offs) + & SYSS_RESETDONE_MASK), + MAX_MODULE_SOFTRESET_WAIT, c); + + if (c == MAX_MODULE_SOFTRESET_WAIT) + pr_warning("dss_core: waiting for reset to finish failed\n"); + else + pr_debug("dss_core: softreset done\n"); + + for (i = oh->opt_clks_cnt, oc = oh->opt_clks; i > 0; i--, oc++) + if (oc->_clk) + clk_disable(oc->_clk); + + r = (c == MAX_MODULE_SOFTRESET_WAIT) ? -ETIMEDOUT : 0; + + return r; +} diff --git a/arch/arm/mach-omap2/omap_hwmod_2xxx_3xxx_ipblock_data.c b/arch/arm/mach-omap2/omap_hwmod_2xxx_3xxx_ipblock_data.c index d78c1324ae59..c11273da5dcc 100644 --- a/arch/arm/mach-omap2/omap_hwmod_2xxx_3xxx_ipblock_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_2xxx_3xxx_ipblock_data.c @@ -11,6 +11,7 @@ #include #include #include +#include #include @@ -51,6 +52,7 @@ static struct omap_hwmod_class_sysconfig omap2_dss_sysc = { struct omap_hwmod_class omap2_dss_hwmod_class = { .name = "dss", .sysc = &omap2_dss_sysc, + .reset = omap_dss_reset, }; /* diff --git a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c index cadf0bb2d3b7..3b04d63316f5 100644 --- a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c @@ -30,6 +30,7 @@ #include #include #include +#include #include "omap_hwmod_common_data.h" @@ -1187,6 +1188,7 @@ static struct omap_hwmod_class_sysconfig omap44xx_dss_sysc = { static struct omap_hwmod_class omap44xx_dss_hwmod_class = { .name = "dss", .sysc = &omap44xx_dss_sysc, + .reset = omap_dss_reset, }; /* dss */ diff --git a/arch/arm/plat-omap/include/plat/common.h b/arch/arm/plat-omap/include/plat/common.h index c50df4814f6f..3ff3e36580f2 100644 --- a/arch/arm/plat-omap/include/plat/common.h +++ b/arch/arm/plat-omap/include/plat/common.h @@ -30,6 +30,7 @@ #include #include +#include struct sys_timer; @@ -55,6 +56,8 @@ void am35xx_init_early(void); void ti816x_init_early(void); void omap4430_init_early(void); +extern int omap_dss_reset(struct omap_hwmod *); + void omap_sram_init(void); /* -- cgit v1.2.1 From b923d40dd4211c4ef7d4efa2bd81b7ca1d8744c1 Mon Sep 17 00:00:00 2001 From: Archit Taneja Date: Thu, 6 Oct 2011 18:04:08 -0600 Subject: ARM: OMAP2PLUS: DSS: Ensure DSS works correctly if display is enabled in bootloader Resetting DISPC when a DISPC output is enabled causes the DSS to go into an inconsistent state. Thus if the bootloader has enabled a display, the hwmod code cannot reset the DISPC module just like that, but the outputs need to be disabled first. Add function dispc_disable_outputs() which disables all active overlay manager and ensure all frame transfers are completed. Modify omap_dss_reset() to call this function and clear DSS_CONTROL, DSS_SDI_CONTROL and DSS_PLL_CONTROL so that DSS is in a clean state when the DSS2 driver starts. This resolves the hang issue(caused by a L3 error during boot) seen on the beagle board C3, which has a factory bootloader that enables display. The issue is resolved with this patch. Thanks to Tomi and Sricharan for some additional testing. Acked-by: Tomi Valkeinen Tested-by: R, Sricharan Signed-off-by: Archit Taneja [paul@pwsan.com: restructured code, removed omap_{read,write}l(), removed cpu_is_omap*() calls and converted to dev_attr] Signed-off-by: Paul Walmsley --- arch/arm/mach-omap2/display.c | 124 +++++++++++++++++++++++++++ arch/arm/mach-omap2/display.h | 29 +++++++ arch/arm/mach-omap2/omap_hwmod_2420_data.c | 1 + arch/arm/mach-omap2/omap_hwmod_2430_data.c | 1 + arch/arm/mach-omap2/omap_hwmod_3xxx_data.c | 1 + arch/arm/mach-omap2/omap_hwmod_44xx_data.c | 6 ++ arch/arm/mach-omap2/omap_hwmod_common_data.c | 4 + arch/arm/mach-omap2/omap_hwmod_common_data.h | 4 + 8 files changed, 170 insertions(+) create mode 100644 arch/arm/mach-omap2/display.h (limited to 'arch') diff --git a/arch/arm/mach-omap2/display.c b/arch/arm/mach-omap2/display.c index 941b5459707f..dce9905d64bb 100644 --- a/arch/arm/mach-omap2/display.c +++ b/arch/arm/mach-omap2/display.c @@ -30,6 +30,32 @@ #include #include "control.h" +#include "display.h" + +#define DISPC_CONTROL 0x0040 +#define DISPC_CONTROL2 0x0238 +#define DISPC_IRQSTATUS 0x0018 + +#define DSS_SYSCONFIG 0x10 +#define DSS_SYSSTATUS 0x14 +#define DSS_CONTROL 0x40 +#define DSS_SDI_CONTROL 0x44 +#define DSS_PLL_CONTROL 0x48 + +#define LCD_EN_MASK (0x1 << 0) +#define DIGIT_EN_MASK (0x1 << 1) + +#define FRAMEDONE_IRQ_SHIFT 0 +#define EVSYNC_EVEN_IRQ_SHIFT 2 +#define EVSYNC_ODD_IRQ_SHIFT 3 +#define FRAMEDONE2_IRQ_SHIFT 22 +#define FRAMEDONETV_IRQ_SHIFT 24 + +/* + * FRAMEDONE_IRQ_TIMEOUT: how long (in milliseconds) to wait during DISPC + * reset before deciding that something has gone wrong + */ +#define FRAMEDONE_IRQ_TIMEOUT 100 static struct platform_device omap_display_device = { .name = "omapdss", @@ -174,6 +200,90 @@ int __init omap_display_init(struct omap_dss_board_info *board_data) return r; } +static void dispc_disable_outputs(void) +{ + u32 v, irq_mask = 0; + bool lcd_en, digit_en, lcd2_en = false; + int i; + struct omap_dss_dispc_dev_attr *da; + struct omap_hwmod *oh; + + oh = omap_hwmod_lookup("dss_dispc"); + if (!oh) { + WARN(1, "display: could not disable outputs during reset - could not find dss_dispc hwmod\n"); + return; + } + + if (!oh->dev_attr) { + pr_err("display: could not disable outputs during reset due to missing dev_attr\n"); + return; + } + + da = (struct omap_dss_dispc_dev_attr *)oh->dev_attr; + + /* store value of LCDENABLE and DIGITENABLE bits */ + v = omap_hwmod_read(oh, DISPC_CONTROL); + lcd_en = v & LCD_EN_MASK; + digit_en = v & DIGIT_EN_MASK; + + /* store value of LCDENABLE for LCD2 */ + if (da->manager_count > 2) { + v = omap_hwmod_read(oh, DISPC_CONTROL2); + lcd2_en = v & LCD_EN_MASK; + } + + if (!(lcd_en | digit_en | lcd2_en)) + return; /* no managers currently enabled */ + + /* + * If any manager was enabled, we need to disable it before + * DSS clocks are disabled or DISPC module is reset + */ + if (lcd_en) + irq_mask |= 1 << FRAMEDONE_IRQ_SHIFT; + + if (digit_en) { + if (da->has_framedonetv_irq) { + irq_mask |= 1 << FRAMEDONETV_IRQ_SHIFT; + } else { + irq_mask |= 1 << EVSYNC_EVEN_IRQ_SHIFT | + 1 << EVSYNC_ODD_IRQ_SHIFT; + } + } + + if (lcd2_en) + irq_mask |= 1 << FRAMEDONE2_IRQ_SHIFT; + + /* + * clear any previous FRAMEDONE, FRAMEDONETV, + * EVSYNC_EVEN/ODD or FRAMEDONE2 interrupts + */ + omap_hwmod_write(irq_mask, oh, DISPC_IRQSTATUS); + + /* disable LCD and TV managers */ + v = omap_hwmod_read(oh, DISPC_CONTROL); + v &= ~(LCD_EN_MASK | DIGIT_EN_MASK); + omap_hwmod_write(v, oh, DISPC_CONTROL); + + /* disable LCD2 manager */ + if (da->manager_count > 2) { + v = omap_hwmod_read(oh, DISPC_CONTROL2); + v &= ~LCD_EN_MASK; + omap_hwmod_write(v, oh, DISPC_CONTROL2); + } + + i = 0; + while ((omap_hwmod_read(oh, DISPC_IRQSTATUS) & irq_mask) != + irq_mask) { + i++; + if (i > FRAMEDONE_IRQ_TIMEOUT) { + pr_err("didn't get FRAMEDONE1/2 or TV interrupt\n"); + break; + } + mdelay(1); + } +} + #define MAX_MODULE_SOFTRESET_WAIT 10000 int omap_dss_reset(struct omap_hwmod *oh) { @@ -190,6 +300,20 @@ int omap_dss_reset(struct omap_hwmod *oh) if (oc->_clk) clk_enable(oc->_clk); + dispc_disable_outputs(); + + /* clear SDI registers */ + if (cpu_is_omap3430()) { + omap_hwmod_write(0x0, oh, DSS_SDI_CONTROL); + omap_hwmod_write(0x0, oh, DSS_PLL_CONTROL); + } + + /* + * clear DSS_CONTROL register to switch DSS clock sources to + * PRCM clock, if any + */ + omap_hwmod_write(0x0, oh, DSS_CONTROL); + omap_test_timeout((omap_hwmod_read(oh, oh->class->sysc->syss_offs) & SYSS_RESETDONE_MASK), MAX_MODULE_SOFTRESET_WAIT, c); diff --git a/arch/arm/mach-omap2/display.h b/arch/arm/mach-omap2/display.h new file mode 100644 index 000000000000..b871b017b352 --- /dev/null +++ b/arch/arm/mach-omap2/display.h @@ -0,0 +1,29 @@ +/* + * display.h - OMAP2+ integration-specific DSS header + * + * Copyright (C) 2011 Texas Instruments, Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published by + * the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program. If not, see . + */ + +#ifndef __ARCH_ARM_MACH_OMAP2_DISPLAY_H +#define __ARCH_ARM_MACH_OMAP2_DISPLAY_H + +#include + +struct omap_dss_dispc_dev_attr { + u8 manager_count; + bool has_framedonetv_irq; +}; + +#endif diff --git a/arch/arm/mach-omap2/omap_hwmod_2420_data.c b/arch/arm/mach-omap2/omap_hwmod_2420_data.c index 74037a5807af..a5409ce3f323 100644 --- a/arch/arm/mach-omap2/omap_hwmod_2420_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_2420_data.c @@ -943,6 +943,7 @@ static struct omap_hwmod omap2420_dss_dispc_hwmod = { .slaves = omap2420_dss_dispc_slaves, .slaves_cnt = ARRAY_SIZE(omap2420_dss_dispc_slaves), .flags = HWMOD_NO_IDLEST, + .dev_attr = &omap2_3_dss_dispc_dev_attr }; /* l4_core -> dss_rfbi */ diff --git a/arch/arm/mach-omap2/omap_hwmod_2430_data.c b/arch/arm/mach-omap2/omap_hwmod_2430_data.c index 6f0365388dfc..c4f56cb60d7d 100644 --- a/arch/arm/mach-omap2/omap_hwmod_2430_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_2430_data.c @@ -1004,6 +1004,7 @@ static struct omap_hwmod omap2430_dss_dispc_hwmod = { .slaves = omap2430_dss_dispc_slaves, .slaves_cnt = ARRAY_SIZE(omap2430_dss_dispc_slaves), .flags = HWMOD_NO_IDLEST, + .dev_attr = &omap2_3_dss_dispc_dev_attr }; /* l4_core -> dss_rfbi */ diff --git a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c index 4aaf0caaf3cc..7f8915ad5099 100644 --- a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c @@ -1462,6 +1462,7 @@ static struct omap_hwmod omap3xxx_dss_dispc_hwmod = { .slaves = omap3xxx_dss_dispc_slaves, .slaves_cnt = ARRAY_SIZE(omap3xxx_dss_dispc_slaves), .flags = HWMOD_NO_IDLEST, + .dev_attr = &omap2_3_dss_dispc_dev_attr }; /* diff --git a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c index 3b04d63316f5..daaf165af696 100644 --- a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c @@ -1327,6 +1327,11 @@ static struct omap_hwmod_addr_space omap44xx_dss_dispc_addrs[] = { { } }; +static struct omap_dss_dispc_dev_attr omap44xx_dss_dispc_dev_attr = { + .manager_count = 3, + .has_framedonetv_irq = 1 +}; + /* l4_per -> dss_dispc */ static struct omap_hwmod_ocp_if omap44xx_l4_per__dss_dispc = { .master = &omap44xx_l4_per_hwmod, @@ -1357,6 +1362,7 @@ static struct omap_hwmod omap44xx_dss_dispc_hwmod = { }, .slaves = omap44xx_dss_dispc_slaves, .slaves_cnt = ARRAY_SIZE(omap44xx_dss_dispc_slaves), + .dev_attr = &omap44xx_dss_dispc_dev_attr }; /* diff --git a/arch/arm/mach-omap2/omap_hwmod_common_data.c b/arch/arm/mach-omap2/omap_hwmod_common_data.c index de832ebc93a9..51e5418899fb 100644 --- a/arch/arm/mach-omap2/omap_hwmod_common_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_common_data.c @@ -49,3 +49,7 @@ struct omap_hwmod_sysc_fields omap_hwmod_sysc_type2 = { .srst_shift = SYSC_TYPE2_SOFTRESET_SHIFT, }; +struct omap_dss_dispc_dev_attr omap2_3_dss_dispc_dev_attr = { + .manager_count = 2, + .has_framedonetv_irq = 0 +}; diff --git a/arch/arm/mach-omap2/omap_hwmod_common_data.h b/arch/arm/mach-omap2/omap_hwmod_common_data.h index 39a7c37f4587..ad5d8f04c0b8 100644 --- a/arch/arm/mach-omap2/omap_hwmod_common_data.h +++ b/arch/arm/mach-omap2/omap_hwmod_common_data.h @@ -16,6 +16,8 @@ #include +#include "display.h" + /* Common address space across OMAP2xxx */ extern struct omap_hwmod_addr_space omap2xxx_uart1_addr_space[]; extern struct omap_hwmod_addr_space omap2xxx_uart2_addr_space[]; @@ -111,4 +113,6 @@ extern struct omap_hwmod_class omap2xxx_dma_hwmod_class; extern struct omap_hwmod_class omap2xxx_mailbox_hwmod_class; extern struct omap_hwmod_class omap2xxx_mcspi_class; +extern struct omap_dss_dispc_dev_attr omap2_3_dss_dispc_dev_attr; + #endif -- cgit v1.2.1 From 76ee4557137ce12a60a1e1a070ed341182163a64 Mon Sep 17 00:00:00 2001 From: Kyungmin Park Date: Tue, 8 Nov 2011 19:57:59 +0900 Subject: ARM: EXYNOS: Fix compiler error with THIS_MODULE CC arch/arm/mach-exynos/cpuidle.o arch/arm/mach-exynos/cpuidle.c:36: error: 'THIS_MODULE' undeclared here (not in a function) arch/arm/mach-exynos/cpuidle.c: In function 'exynos4_enter_idle': arch/arm/mach-exynos/cpuidle.c:42: error: storage size of 'before' isn't known arch/arm/mach-exynos/cpuidle.c:42: error: storage size of 'after' isn't known arch/arm/mach-exynos/cpuidle.c:46: error: implicit declaration of function 'do_gettimeofday' arch/arm/mach-exynos/cpuidle.c:52: error: 'USEC_PER_SEC' undeclared (first use in this function) arch/arm/mach-exynos/cpuidle.c:52: error: (Each undeclared identifier is reported only once arch/arm/mach-exynos/cpuidle.c:52: error: for each function it appears in.) arch/arm/mach-exynos/cpuidle.c:42: warning: unused variable 'after' arch/arm/mach-exynos/cpuidle.c:42: warning: unused variable 'before' make[1]: *** [arch/arm/mach-exynos/cpuidle.o] Error 1 Signed-off-by: Kyungmin Park [kgene.kim@samsung.com: Fixed as per Stephen's suggestion] Signed-off-by: Kukjin Kim --- arch/arm/mach-exynos/cpuidle.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'arch') diff --git a/arch/arm/mach-exynos/cpuidle.c b/arch/arm/mach-exynos/cpuidle.c index 35f6502144ae..4ebb382c5979 100644 --- a/arch/arm/mach-exynos/cpuidle.c +++ b/arch/arm/mach-exynos/cpuidle.c @@ -12,6 +12,8 @@ #include #include #include +#include +#include #include -- cgit v1.2.1 From 5bb01a991897d74295ff8de548d350400d7370a9 Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Wed, 9 Nov 2011 15:29:31 -0800 Subject: ARM: OMAP: Fix map_io for Amstrad E3 Commit 7b88e62f5d219a86d81bdf4388012c97dc42e8f8 (ARM: OMAP1: Use generic map_io, init_early and init_irq) changed omap1 to use generic map_io. Looks like I missed one board though. Fix this by adding a custom map_io for Amstrad E3. Reported-by: Aaro Koskinen Signed-off-by: Tony Lindgren --- arch/arm/mach-omap1/board-ams-delta.c | 10 +++++++--- 1 file changed, 7 insertions(+), 3 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-omap1/board-ams-delta.c b/arch/arm/mach-omap1/board-ams-delta.c index 51bae31cf361..b0f15d234a12 100644 --- a/arch/arm/mach-omap1/board-ams-delta.c +++ b/arch/arm/mach-omap1/board-ams-delta.c @@ -302,8 +302,6 @@ static void __init ams_delta_init(void) omap_cfg_reg(J19_1610_CAM_D6); omap_cfg_reg(J18_1610_CAM_D7); - iotable_init(ams_delta_io_desc, ARRAY_SIZE(ams_delta_io_desc)); - omap_board_config = ams_delta_config; omap_board_config_size = ARRAY_SIZE(ams_delta_config); omap_serial_init(); @@ -373,10 +371,16 @@ static int __init ams_delta_modem_init(void) } arch_initcall(ams_delta_modem_init); +static void __init ams_delta_map_io(void) +{ + omap15xx_map_io(); + iotable_init(ams_delta_io_desc, ARRAY_SIZE(ams_delta_io_desc)); +} + MACHINE_START(AMS_DELTA, "Amstrad E3 (Delta)") /* Maintainer: Jonathan McDowell */ .atag_offset = 0x100, - .map_io = omap15xx_map_io, + .map_io = ams_delta_map_io, .init_early = omap1_init_early, .reserve = omap_reserve, .init_irq = omap1_init_irq, -- cgit v1.2.1 From c0a39151a4055332897cba615623d3de2f3896df Mon Sep 17 00:00:00 2001 From: Haojian Zhuang Date: Thu, 10 Nov 2011 07:13:07 +0800 Subject: ARM: pxa: fix inconsistent CONFIG_USB_PXA27X Since CONFIG_USB_GADGET_PXA27X and other macros are renamed to CONFIG_USB_PXA27X. Update them in arch/arm/mach-pxa and arch/arm/configs to keep consistent. Cc: stable@kernel.org Signed-off-by: Haojian Zhuang Acked-by: Felipe Balbi Signed-off-by: Eric Miao --- arch/arm/configs/ezx_defconfig | 2 +- arch/arm/configs/imote2_defconfig | 2 +- arch/arm/configs/magician_defconfig | 2 +- arch/arm/configs/zeus_defconfig | 2 +- arch/arm/mach-pxa/balloon3.c | 2 +- arch/arm/mach-pxa/colibri-pxa320.c | 2 +- arch/arm/mach-pxa/gumstix.c | 2 +- arch/arm/mach-pxa/include/mach/palm27x.h | 4 ++-- arch/arm/mach-pxa/palm27x.c | 4 ++-- arch/arm/mach-pxa/palmtc.c | 2 +- arch/arm/mach-pxa/vpac270.c | 2 +- 11 files changed, 13 insertions(+), 13 deletions(-) (limited to 'arch') diff --git a/arch/arm/configs/ezx_defconfig b/arch/arm/configs/ezx_defconfig index 227a477346ed..d95763d5f0d8 100644 --- a/arch/arm/configs/ezx_defconfig +++ b/arch/arm/configs/ezx_defconfig @@ -287,7 +287,7 @@ CONFIG_USB=y # CONFIG_USB_DEVICE_CLASS is not set CONFIG_USB_OHCI_HCD=y CONFIG_USB_GADGET=y -CONFIG_USB_GADGET_PXA27X=y +CONFIG_USB_PXA27X=y CONFIG_USB_ETH=m # CONFIG_USB_ETH_RNDIS is not set CONFIG_MMC=y diff --git a/arch/arm/configs/imote2_defconfig b/arch/arm/configs/imote2_defconfig index 176ec22af034..fd996bb13022 100644 --- a/arch/arm/configs/imote2_defconfig +++ b/arch/arm/configs/imote2_defconfig @@ -263,7 +263,7 @@ CONFIG_USB=y # CONFIG_USB_DEVICE_CLASS is not set CONFIG_USB_OHCI_HCD=y CONFIG_USB_GADGET=y -CONFIG_USB_GADGET_PXA27X=y +CONFIG_USB_PXA27X=y CONFIG_USB_ETH=m # CONFIG_USB_ETH_RNDIS is not set CONFIG_MMC=y diff --git a/arch/arm/configs/magician_defconfig b/arch/arm/configs/magician_defconfig index a88e64d4e9a5..443675d317e6 100644 --- a/arch/arm/configs/magician_defconfig +++ b/arch/arm/configs/magician_defconfig @@ -132,7 +132,7 @@ CONFIG_USB_MON=m CONFIG_USB_OHCI_HCD=y CONFIG_USB_GADGET=y CONFIG_USB_GADGET_VBUS_DRAW=500 -CONFIG_USB_GADGET_PXA27X=y +CONFIG_USB_PXA27X=y CONFIG_USB_ETH=m # CONFIG_USB_ETH_RNDIS is not set CONFIG_USB_GADGETFS=m diff --git a/arch/arm/configs/zeus_defconfig b/arch/arm/configs/zeus_defconfig index 59577ad3f4ef..547a3c1e59db 100644 --- a/arch/arm/configs/zeus_defconfig +++ b/arch/arm/configs/zeus_defconfig @@ -140,7 +140,7 @@ CONFIG_USB_SERIAL=m CONFIG_USB_SERIAL_GENERIC=y CONFIG_USB_SERIAL_MCT_U232=m CONFIG_USB_GADGET=m -CONFIG_USB_GADGET_PXA27X=y +CONFIG_USB_PXA27X=y CONFIG_USB_ETH=m CONFIG_USB_GADGETFS=m CONFIG_USB_FILE_STORAGE=m diff --git a/arch/arm/mach-pxa/balloon3.c b/arch/arm/mach-pxa/balloon3.c index fc0b8544e174..4b81f59a4cba 100644 --- a/arch/arm/mach-pxa/balloon3.c +++ b/arch/arm/mach-pxa/balloon3.c @@ -307,7 +307,7 @@ static inline void balloon3_mmc_init(void) {} /****************************************************************************** * USB Gadget ******************************************************************************/ -#if defined(CONFIG_USB_GADGET_PXA27X)||defined(CONFIG_USB_GADGET_PXA27X_MODULE) +#if defined(CONFIG_USB_PXA27X)||defined(CONFIG_USB_PXA27X_MODULE) static void balloon3_udc_command(int cmd) { if (cmd == PXA2XX_UDC_CMD_CONNECT) diff --git a/arch/arm/mach-pxa/colibri-pxa320.c b/arch/arm/mach-pxa/colibri-pxa320.c index 692e1ffc5586..d23b92b80488 100644 --- a/arch/arm/mach-pxa/colibri-pxa320.c +++ b/arch/arm/mach-pxa/colibri-pxa320.c @@ -146,7 +146,7 @@ static void __init colibri_pxa320_init_eth(void) static inline void __init colibri_pxa320_init_eth(void) {} #endif /* CONFIG_AX88796 */ -#if defined(CONFIG_USB_GADGET_PXA27X)||defined(CONFIG_USB_GADGET_PXA27X_MODULE) +#if defined(CONFIG_USB_PXA27X)||defined(CONFIG_USB_PXA27X_MODULE) static struct gpio_vbus_mach_info colibri_pxa320_gpio_vbus_info = { .gpio_vbus = mfp_to_gpio(MFP_PIN_GPIO96), .gpio_pullup = -1, diff --git a/arch/arm/mach-pxa/gumstix.c b/arch/arm/mach-pxa/gumstix.c index 9c8208ca0415..ffdd70dad327 100644 --- a/arch/arm/mach-pxa/gumstix.c +++ b/arch/arm/mach-pxa/gumstix.c @@ -106,7 +106,7 @@ static void __init gumstix_mmc_init(void) } #endif -#ifdef CONFIG_USB_GADGET_PXA25X +#ifdef CONFIG_USB_PXA25X static struct gpio_vbus_mach_info gumstix_udc_info = { .gpio_vbus = GPIO_GUMSTIX_USB_GPIOn, .gpio_pullup = GPIO_GUMSTIX_USB_GPIOx, diff --git a/arch/arm/mach-pxa/include/mach/palm27x.h b/arch/arm/mach-pxa/include/mach/palm27x.h index f80bbe246afe..d4eac3d6ffb5 100644 --- a/arch/arm/mach-pxa/include/mach/palm27x.h +++ b/arch/arm/mach-pxa/include/mach/palm27x.h @@ -37,8 +37,8 @@ extern void __init palm27x_lcd_init(int power, #define palm27x_lcd_init(power, mode) do {} while (0) #endif -#if defined(CONFIG_USB_GADGET_PXA27X) || \ - defined(CONFIG_USB_GADGET_PXA27X_MODULE) +#if defined(CONFIG_USB_PXA27X) || \ + defined(CONFIG_USB_PXA27X_MODULE) extern void __init palm27x_udc_init(int vbus, int pullup, int vbus_inverted); #else diff --git a/arch/arm/mach-pxa/palm27x.c b/arch/arm/mach-pxa/palm27x.c index 325c245c0a0d..fbc10d7b95d1 100644 --- a/arch/arm/mach-pxa/palm27x.c +++ b/arch/arm/mach-pxa/palm27x.c @@ -164,8 +164,8 @@ void __init palm27x_lcd_init(int power, struct pxafb_mode_info *mode) /****************************************************************************** * USB Gadget ******************************************************************************/ -#if defined(CONFIG_USB_GADGET_PXA27X) || \ - defined(CONFIG_USB_GADGET_PXA27X_MODULE) +#if defined(CONFIG_USB_PXA27X) || \ + defined(CONFIG_USB_PXA27X_MODULE) static struct gpio_vbus_mach_info palm27x_udc_info = { .gpio_vbus_inverted = 1, }; diff --git a/arch/arm/mach-pxa/palmtc.c b/arch/arm/mach-pxa/palmtc.c index 6ec7caefb37c..2c24c67fd92b 100644 --- a/arch/arm/mach-pxa/palmtc.c +++ b/arch/arm/mach-pxa/palmtc.c @@ -338,7 +338,7 @@ static inline void palmtc_mkp_init(void) {} /****************************************************************************** * UDC ******************************************************************************/ -#if defined(CONFIG_USB_GADGET_PXA25X)||defined(CONFIG_USB_GADGET_PXA25X_MODULE) +#if defined(CONFIG_USB_PXA25X)||defined(CONFIG_USB_PXA25X_MODULE) static struct gpio_vbus_mach_info palmtc_udc_info = { .gpio_vbus = GPIO_NR_PALMTC_USB_DETECT_N, .gpio_vbus_inverted = 1, diff --git a/arch/arm/mach-pxa/vpac270.c b/arch/arm/mach-pxa/vpac270.c index a7539a6ed1ff..ca0c6615028c 100644 --- a/arch/arm/mach-pxa/vpac270.c +++ b/arch/arm/mach-pxa/vpac270.c @@ -343,7 +343,7 @@ static inline void vpac270_uhc_init(void) {} /****************************************************************************** * USB Gadget ******************************************************************************/ -#if defined(CONFIG_USB_GADGET_PXA27X)||defined(CONFIG_USB_GADGET_PXA27X_MODULE) +#if defined(CONFIG_USB_PXA27X)||defined(CONFIG_USB_PXA27X_MODULE) static struct gpio_vbus_mach_info vpac270_gpio_vbus_info = { .gpio_vbus = GPIO41_VPAC270_UDC_DETECT, .gpio_pullup = -1, -- cgit v1.2.1 From 7be620f79714b6598275bd5c71d89bb24dfe332e Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Thu, 10 Nov 2011 12:12:55 -0800 Subject: ARM: OMAP: Fix dpll_data compile error when omap2 only is selected Without this patch we get the following error: arch/arm/mach-omap2/clkt_dpll.c: In function '_dpll_test_fint': arch/arm/mach-omap2/clkt_dpll.c:98: error: 'struct dpll_data' has no member named 'flags' Signed-off-by: Tony Lindgren --- arch/arm/plat-omap/include/plat/clock.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/plat-omap/include/plat/clock.h b/arch/arm/plat-omap/include/plat/clock.h index 197ca03c3f7d..eb73ab40e955 100644 --- a/arch/arm/plat-omap/include/plat/clock.h +++ b/arch/arm/plat-omap/include/plat/clock.h @@ -165,8 +165,8 @@ struct dpll_data { u8 auto_recal_bit; u8 recal_en_bit; u8 recal_st_bit; - u8 flags; # endif + u8 flags; }; #endif -- cgit v1.2.1 From 6a53fc531dcf4719e80d0152ca044e35b0f92591 Mon Sep 17 00:00:00 2001 From: Fabio Estevam Date: Thu, 25 Aug 2011 08:52:36 -0300 Subject: ARM: imx: Remove unused chip revision strings Since commit (167a19d2: ARM: imx: Introduce generic function for displaying silicon revision) we no longer need the chip revision strings, so remove them. Signed-off-by: Fabio Estevam Signed-off-by: Sascha Hauer --- arch/arm/plat-mxc/include/mach/mxc.h | 14 -------------- 1 file changed, 14 deletions(-) (limited to 'arch') diff --git a/arch/arm/plat-mxc/include/mach/mxc.h b/arch/arm/plat-mxc/include/mach/mxc.h index 00a78193c681..a4d36d601d55 100644 --- a/arch/arm/plat-mxc/include/mach/mxc.h +++ b/arch/arm/plat-mxc/include/mach/mxc.h @@ -50,20 +50,6 @@ #define IMX_CHIP_REVISION_3_3 0x33 #define IMX_CHIP_REVISION_UNKNOWN 0xff -#define IMX_CHIP_REVISION_1_0_STRING "1.0" -#define IMX_CHIP_REVISION_1_1_STRING "1.1" -#define IMX_CHIP_REVISION_1_2_STRING "1.2" -#define IMX_CHIP_REVISION_1_3_STRING "1.3" -#define IMX_CHIP_REVISION_2_0_STRING "2.0" -#define IMX_CHIP_REVISION_2_1_STRING "2.1" -#define IMX_CHIP_REVISION_2_2_STRING "2.2" -#define IMX_CHIP_REVISION_2_3_STRING "2.3" -#define IMX_CHIP_REVISION_3_0_STRING "3.0" -#define IMX_CHIP_REVISION_3_1_STRING "3.1" -#define IMX_CHIP_REVISION_3_2_STRING "3.2" -#define IMX_CHIP_REVISION_3_3_STRING "3.3" -#define IMX_CHIP_REVISION_UNKNOWN_STRING "unknown" - #ifndef __ASSEMBLY__ extern unsigned int __mxc_cpu_type; #endif -- cgit v1.2.1 From 8c6d8319eca370f804fb8e1fcf7070b587d1b81d Mon Sep 17 00:00:00 2001 From: Shawn Guo Date: Fri, 11 Nov 2011 13:09:18 +0800 Subject: arm/imx: remove imx_idle hook and use pm_idle instead The patch removes imx_idle hook and use pm_idle instead to get imx arch_idle prepared for the cleanup. It's suggested by Russel King as below. > The final removal of mach/system.h depends on getting rid of the arch_idle > thing. While going through these headers, I was dismayed to find these: > > arch/arm/mach-s3c2410/include/mach/system.h:void (*s3c24xx_idle)(void); > arch/arm/plat-mxc/include/mach/system.h:extern void (*imx_idle)(void); > > when we have a perfectly good pm_idle hook already in place - so there's > no excuse for these especially when other platforms are already using > pm_idle to hook their platform specific idle function into. This is > something that better be gone at the next merge window! Suggested-by: Russell King Signed-off-by: Shawn Guo Acked-by: Russell King Signed-off-by: Sascha Hauer --- arch/arm/mach-imx/mm-imx3.c | 53 +++++++++++++++++---------------- arch/arm/mach-mx5/mm.c | 6 ++-- arch/arm/plat-mxc/include/mach/common.h | 1 - arch/arm/plat-mxc/include/mach/system.h | 7 +---- arch/arm/plat-mxc/system.c | 1 - 5 files changed, 33 insertions(+), 35 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-imx/mm-imx3.c b/arch/arm/mach-imx/mm-imx3.c index 9f0e82ec3398..6d01de326f90 100644 --- a/arch/arm/mach-imx/mm-imx3.c +++ b/arch/arm/mach-imx/mm-imx3.c @@ -33,29 +33,32 @@ static void imx3_idle(void) { unsigned long reg = 0; - __asm__ __volatile__( - /* disable I and D cache */ - "mrc p15, 0, %0, c1, c0, 0\n" - "bic %0, %0, #0x00001000\n" - "bic %0, %0, #0x00000004\n" - "mcr p15, 0, %0, c1, c0, 0\n" - /* invalidate I cache */ - "mov %0, #0\n" - "mcr p15, 0, %0, c7, c5, 0\n" - /* clear and invalidate D cache */ - "mov %0, #0\n" - "mcr p15, 0, %0, c7, c14, 0\n" - /* WFI */ - "mov %0, #0\n" - "mcr p15, 0, %0, c7, c0, 4\n" - "nop\n" "nop\n" "nop\n" "nop\n" - "nop\n" "nop\n" "nop\n" - /* enable I and D cache */ - "mrc p15, 0, %0, c1, c0, 0\n" - "orr %0, %0, #0x00001000\n" - "orr %0, %0, #0x00000004\n" - "mcr p15, 0, %0, c1, c0, 0\n" - : "=r" (reg)); + + if (!need_resched()) + __asm__ __volatile__( + /* disable I and D cache */ + "mrc p15, 0, %0, c1, c0, 0\n" + "bic %0, %0, #0x00001000\n" + "bic %0, %0, #0x00000004\n" + "mcr p15, 0, %0, c1, c0, 0\n" + /* invalidate I cache */ + "mov %0, #0\n" + "mcr p15, 0, %0, c7, c5, 0\n" + /* clear and invalidate D cache */ + "mov %0, #0\n" + "mcr p15, 0, %0, c7, c14, 0\n" + /* WFI */ + "mov %0, #0\n" + "mcr p15, 0, %0, c7, c0, 4\n" + "nop\n" "nop\n" "nop\n" "nop\n" + "nop\n" "nop\n" "nop\n" + /* enable I and D cache */ + "mrc p15, 0, %0, c1, c0, 0\n" + "orr %0, %0, #0x00001000\n" + "orr %0, %0, #0x00000004\n" + "mcr p15, 0, %0, c1, c0, 0\n" + : "=r" (reg)); + local_irq_enable(); } static void __iomem *imx3_ioremap(unsigned long phys_addr, size_t size, @@ -143,7 +146,7 @@ void __init imx31_init_early(void) { mxc_set_cpu_type(MXC_CPU_MX31); mxc_arch_reset_init(MX31_IO_ADDRESS(MX31_WDOG_BASE_ADDR)); - imx_idle = imx3_idle; + pm_idle = imx3_idle; imx_ioremap = imx3_ioremap; } @@ -152,7 +155,7 @@ void __init imx35_init_early(void) mxc_set_cpu_type(MXC_CPU_MX35); mxc_iomux_v3_init(MX35_IO_ADDRESS(MX35_IOMUXC_BASE_ADDR)); mxc_arch_reset_init(MX35_IO_ADDRESS(MX35_WDOG_BASE_ADDR)); - imx_idle = imx3_idle; + pm_idle = imx3_idle; imx_ioremap = imx3_ioremap; } diff --git a/arch/arm/mach-mx5/mm.c b/arch/arm/mach-mx5/mm.c index 26eacc9d0d90..df4a508f240a 100644 --- a/arch/arm/mach-mx5/mm.c +++ b/arch/arm/mach-mx5/mm.c @@ -23,7 +23,9 @@ static void imx5_idle(void) { - mx5_cpu_lp_set(WAIT_UNCLOCKED_POWER_OFF); + if (!need_resched()) + mx5_cpu_lp_set(WAIT_UNCLOCKED_POWER_OFF); + local_irq_enable(); } /* @@ -89,7 +91,7 @@ void __init imx51_init_early(void) mxc_set_cpu_type(MXC_CPU_MX51); mxc_iomux_v3_init(MX51_IO_ADDRESS(MX51_IOMUXC_BASE_ADDR)); mxc_arch_reset_init(MX51_IO_ADDRESS(MX51_WDOG1_BASE_ADDR)); - imx_idle = imx5_idle; + pm_idle = imx5_idle; } void __init imx53_init_early(void) diff --git a/arch/arm/plat-mxc/include/mach/common.h b/arch/arm/plat-mxc/include/mach/common.h index 83b745a5e1b7..7143d52c25e1 100644 --- a/arch/arm/plat-mxc/include/mach/common.h +++ b/arch/arm/plat-mxc/include/mach/common.h @@ -85,7 +85,6 @@ enum mxc_cpu_pwr_mode { }; extern void mx5_cpu_lp_set(enum mxc_cpu_pwr_mode mode); -extern void (*imx_idle)(void); extern void imx_print_silicon_rev(const char *cpu, int srev); void avic_handle_irq(struct pt_regs *); diff --git a/arch/arm/plat-mxc/include/mach/system.h b/arch/arm/plat-mxc/include/mach/system.h index cf88b3593fba..b9895d250167 100644 --- a/arch/arm/plat-mxc/include/mach/system.h +++ b/arch/arm/plat-mxc/include/mach/system.h @@ -17,14 +17,9 @@ #ifndef __ASM_ARCH_MXC_SYSTEM_H__ #define __ASM_ARCH_MXC_SYSTEM_H__ -extern void (*imx_idle)(void); - static inline void arch_idle(void) { - if (imx_idle != NULL) - (imx_idle)(); - else - cpu_do_idle(); + cpu_do_idle(); } void arch_reset(char mode, const char *cmd); diff --git a/arch/arm/plat-mxc/system.c b/arch/arm/plat-mxc/system.c index 9dad8dcc2ea9..a0bcccf9b640 100644 --- a/arch/arm/plat-mxc/system.c +++ b/arch/arm/plat-mxc/system.c @@ -28,7 +28,6 @@ #include #include -void (*imx_idle)(void) = NULL; void __iomem *(*imx_ioremap)(unsigned long, size_t, unsigned int) = NULL; static void __iomem *wdog_base; -- cgit v1.2.1 From e9b7086b80c4d9e354f4edc9e280ae85a60df408 Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Fri, 11 Nov 2011 10:15:11 -0800 Subject: ARM: OMAP: Fix reprogramming of dpll1 rate Commit a66cb3454f220f49f900646ebdc76cb943319eb7 (ARM: OMAP: Map SRAM later on with ioremap_exec()) moved the SRAM init to happen later to remove a dependency to early SoC detection for map_io. This broke booting on some boards not using Kconfig option for OMAP_CLOCKS_SET_BY_BOOTLOADER as the dpll1 reprogramming would cause the following error: kernel BUG at arch/arm/plat-omap/sram.c:226! Internal error: Oops - undefined instruction: 0 [#1] PREEMPT Modules linked in: CPU: 0 Not tainted (3.2.0-rc1-e3 #9) PC is at omap_sram_reprogram_clock+0x28/0x30 LR is at omap1_select_table_rate+0x88/0xb4 pc : [] lr : [] psr: 600000d3 sp : c035bf10 ip : c035bf20 fp : c035bf1c r10: c035bfd4 r9 : 54029252 r8 : c03f8120 r7 : c0362b50 r6 : 00b71b00 r5 : c03873cc r4 : c0362b40 r3 : 00000000 r2 : c0362b40 r1 : 0000010a r0 : 00002cb0 Flags: nZCv IRQs off FIQs off Mode SVC_32 ISA ARM Segment kernel Control: 0000317f Table: 10004000 DAC: 00000017 Process swapper (pid: 0, stack limit = 0xc035a270) Stack: (0xc035bf10 to 0xc035c000) bf00: c035bf3c c035bf20 c0019f54 c001b0ac bf20: 00001000 00002cb3 00000004 c035ed4c c035bf74 c035bf40 c033ea24 c0019edc bf40: c02f526c 00000002 00000015 bc058c9b 93111a16 c035335c 02000000 c035ed4c bf60: c035ed4c c03f8120 c035bf84 c035bf78 c00194c4 c033e8ec c035bfc4 c035bf88 bf80: c033bc24 c00194a0 c035bf90 c035bf98 00000000 00000000 00000000 00000000 bfa0: 00000001 00000000 c0354678 c035ece4 10004000 103532f4 c035bff4 c035bfc8 bfc0: c0338574 c033b598 00000000 00000000 00000000 c035467c 0000317d c035c03c bfe0: c0354678 c035ece4 00000000 c035bff8 10008040 c0338508 00000000 00000000 Backtrace: [] (omap_sram_reprogram_clock+0x0/0x30) from [] (omap1_select_table_rate+0x88/0xb4) [] (omap1_select_table_rate+0x0/0xb4) from [] (omap1_clk_init+0x148/0x334) r7:c035ed4c r6:00000004 r5:00002cb3 r4:00001000 [] (omap1_clk_init+0x0/0x334) from [] (omap1_init_early+0x34/0x48) r8:c03f8120 r7:c035ed4c r6:c035ed4c r5:02000000 r4:c035335c [] (omap1_init_early+0x0/0x48) from [] (setup_arch+0x69c/0x79c) [] (setup_arch+0x0/0x79c) from [] (start_kernel+0x7c/0x2f4) [] (start_kernel+0x0/0x2f4) from [<10008040>] (0x10008040) r7:c035ece4 r6:c0354678 r5:c035c03c r4:0000317d Code: 0a000002 e1a0e00f e12fff13 e89da800 (e7f001f2) Fix this by adding omap1_clk_late_init() that only reprograms dpll1 if the bootloader rate is less than 60MHz. This also allows removing of the OMAP_CLOCKS_SET_BY_BOOTLOADER option. Reported-by: Aaro Koskinen Tested-by: Aaro Koskinen Signed-off-by: Tony Lindgren --- arch/arm/configs/omap1_defconfig | 1 - arch/arm/mach-omap1/Kconfig | 8 ------ arch/arm/mach-omap1/clock.h | 3 ++- arch/arm/mach-omap1/clock_data.c | 53 ++++++++++++++++++++++++++-------------- arch/arm/mach-omap1/devices.c | 3 +++ 5 files changed, 39 insertions(+), 29 deletions(-) (limited to 'arch') diff --git a/arch/arm/configs/omap1_defconfig b/arch/arm/configs/omap1_defconfig index 7b63462b349d..a7e777581378 100644 --- a/arch/arm/configs/omap1_defconfig +++ b/arch/arm/configs/omap1_defconfig @@ -48,7 +48,6 @@ CONFIG_MACH_SX1=y CONFIG_MACH_NOKIA770=y CONFIG_MACH_AMS_DELTA=y CONFIG_MACH_OMAP_GENERIC=y -CONFIG_OMAP_CLOCKS_SET_BY_BOOTLOADER=y CONFIG_OMAP_ARM_216MHZ=y CONFIG_OMAP_ARM_195MHZ=y CONFIG_OMAP_ARM_192MHZ=y diff --git a/arch/arm/mach-omap1/Kconfig b/arch/arm/mach-omap1/Kconfig index e0a028161dde..73f287d6429b 100644 --- a/arch/arm/mach-omap1/Kconfig +++ b/arch/arm/mach-omap1/Kconfig @@ -171,14 +171,6 @@ config MACH_OMAP_GENERIC comment "OMAP CPU Speed" depends on ARCH_OMAP1 -config OMAP_CLOCKS_SET_BY_BOOTLOADER - bool "OMAP clocks set by bootloader" - depends on ARCH_OMAP1 - help - Enable this option to prevent the kernel from overriding the clock - frequencies programmed by bootloader for MPU, DSP, MMUs, TC, - internal LCD controller and MPU peripherals. - config OMAP_ARM_216MHZ bool "OMAP ARM 216 MHz CPU (1710 only)" depends on ARCH_OMAP1 && ARCH_OMAP16XX diff --git a/arch/arm/mach-omap1/clock.h b/arch/arm/mach-omap1/clock.h index eaf09efb91ca..16b1423b454a 100644 --- a/arch/arm/mach-omap1/clock.h +++ b/arch/arm/mach-omap1/clock.h @@ -17,7 +17,8 @@ #include -extern int __init omap1_clk_init(void); +int omap1_clk_init(void); +void omap1_clk_late_init(void); extern int omap1_clk_enable(struct clk *clk); extern void omap1_clk_disable(struct clk *clk); extern long omap1_clk_round_rate(struct clk *clk, unsigned long rate); diff --git a/arch/arm/mach-omap1/clock_data.c b/arch/arm/mach-omap1/clock_data.c index 92400b9eb69f..1297bb58869c 100644 --- a/arch/arm/mach-omap1/clock_data.c +++ b/arch/arm/mach-omap1/clock_data.c @@ -767,6 +767,15 @@ static struct clk_functions omap1_clk_functions = { .clk_disable_unused = omap1_clk_disable_unused, }; +static void __init omap1_show_rates(void) +{ + pr_notice("Clocking rate (xtal/DPLL1/MPU): " + "%ld.%01ld/%ld.%01ld/%ld.%01ld MHz\n", + ck_ref.rate / 1000000, (ck_ref.rate / 100000) % 10, + ck_dpll1.rate / 1000000, (ck_dpll1.rate / 100000) % 10, + arm_ck.rate / 1000000, (arm_ck.rate / 100000) % 10); +} + int __init omap1_clk_init(void) { struct omap_clk *c; @@ -835,9 +844,12 @@ int __init omap1_clk_init(void) /* We want to be in syncronous scalable mode */ omap_writew(0x1000, ARM_SYSST); -#ifdef CONFIG_OMAP_CLOCKS_SET_BY_BOOTLOADER - /* Use values set by bootloader. Determine PLL rate and recalculate - * dependent clocks as if kernel had changed PLL or divisors. + + /* + * Initially use the values set by bootloader. Determine PLL rate and + * recalculate dependent clocks as if kernel had changed PLL or + * divisors. See also omap1_clk_late_init() that can reprogram dpll1 + * after the SRAM is initialized. */ { unsigned pll_ctl_val = omap_readw(DPLL_CTL); @@ -862,25 +874,10 @@ int __init omap1_clk_init(void) } } } -#else - /* Find the highest supported frequency and enable it */ - if (omap1_select_table_rate(&virtual_ck_mpu, ~0)) { - printk(KERN_ERR "System frequencies not set. Check your config.\n"); - /* Guess sane values (60MHz) */ - omap_writew(0x2290, DPLL_CTL); - omap_writew(cpu_is_omap7xx() ? 0x3005 : 0x1005, ARM_CKCTL); - ck_dpll1.rate = 60000000; - } -#endif propagate_rate(&ck_dpll1); /* Cache rates for clocks connected to ck_ref (not dpll1) */ propagate_rate(&ck_ref); - printk(KERN_INFO "Clocking rate (xtal/DPLL1/MPU): " - "%ld.%01ld/%ld.%01ld/%ld.%01ld MHz\n", - ck_ref.rate / 1000000, (ck_ref.rate / 100000) % 10, - ck_dpll1.rate / 1000000, (ck_dpll1.rate / 100000) % 10, - arm_ck.rate / 1000000, (arm_ck.rate / 100000) % 10); - + omap1_show_rates(); if (machine_is_omap_perseus2() || machine_is_omap_fsample()) { /* Select slicer output as OMAP input clock */ omap_writew(omap_readw(OMAP7XX_PCC_UPLD_CTRL) & ~0x1, @@ -925,3 +922,21 @@ int __init omap1_clk_init(void) return 0; } + +#define OMAP1_DPLL1_SANE_VALUE 60000000 + +void __init omap1_clk_late_init(void) +{ + if (ck_dpll1.rate >= OMAP1_DPLL1_SANE_VALUE) + return; + + /* Find the highest supported frequency and enable it */ + if (omap1_select_table_rate(&virtual_ck_mpu, ~0)) { + pr_err("System frequencies not set, using default. Check your config.\n"); + omap_writew(0x2290, DPLL_CTL); + omap_writew(cpu_is_omap7xx() ? 0x3005 : 0x1005, ARM_CKCTL); + ck_dpll1.rate = OMAP1_DPLL1_SANE_VALUE; + } + propagate_rate(&ck_dpll1); + omap1_show_rates(); +} diff --git a/arch/arm/mach-omap1/devices.c b/arch/arm/mach-omap1/devices.c index 48ef9888e820..475cb2f50d87 100644 --- a/arch/arm/mach-omap1/devices.c +++ b/arch/arm/mach-omap1/devices.c @@ -30,6 +30,8 @@ #include #include +#include "clock.h" + /*-------------------------------------------------------------------------*/ #if defined(CONFIG_RTC_DRV_OMAP) || defined(CONFIG_RTC_DRV_OMAP_MODULE) @@ -293,6 +295,7 @@ static int __init omap1_init_devices(void) return -ENODEV; omap_sram_init(); + omap1_clk_late_init(); /* please keep these calls, and their implementations above, * in alphabetical order so they're easier to sort through. -- cgit v1.2.1 From 22f4cb4bd06db14912f69039917422fe0c5b11fb Mon Sep 17 00:00:00 2001 From: Haojian Zhuang Date: Wed, 9 Nov 2011 10:47:21 +0800 Subject: ARM: mmp: fix build error on gpio MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Parameters of GPIO_REG() should be assigned as volatile. arch/arm/plat-pxa/include/plat/gpio.h: In function ‘gpio_get_value’: arch/arm/plat-pxa/include/plat/gpio.h:12:21: error: invalid operands to binary & (have ‘void *’ and ‘int’) arch/arm/plat-pxa/include/plat/gpio.h: In function ‘gpio_set_value’: arch/arm/plat-pxa/include/plat/gpio.h:21:4: error: lvalue required as left operand of assignment arch/arm/plat-pxa/include/plat/gpio.h:23:4: error: lvalue required as left operand of assignment Signed-off-by: Haojian Zhuang Signed-off-by: Eric Miao --- arch/arm/mach-mmp/include/mach/gpio-pxa.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/mach-mmp/include/mach/gpio-pxa.h b/arch/arm/mach-mmp/include/mach/gpio-pxa.h index d14eeaf16322..99b4ce1b6562 100644 --- a/arch/arm/mach-mmp/include/mach/gpio-pxa.h +++ b/arch/arm/mach-mmp/include/mach/gpio-pxa.h @@ -7,7 +7,7 @@ #define GPIO_REGS_VIRT (APB_VIRT_BASE + 0x19000) #define BANK_OFF(n) (((n) < 3) ? (n) << 2 : 0x100 + (((n) - 3) << 2)) -#define GPIO_REG(x) (GPIO_REGS_VIRT + (x)) +#define GPIO_REG(x) (*(volatile u32 *)(GPIO_REGS_VIRT + (x))) #define NR_BUILTIN_GPIO IRQ_GPIO_NUM -- cgit v1.2.1 From 57d1c0c03c6b48b2b96870d831b9ce6b917f53ac Mon Sep 17 00:00:00 2001 From: Peter Zijlstra Date: Fri, 7 Oct 2011 13:36:40 +0200 Subject: perf/x86: Fix PEBS instruction unwind Masami spotted that we always try to decode the instruction stream as 64bit instructions when running a 64bit kernel, this doesn't work for ia32-compat proglets. Use TIF_IA32 to detect if we need to use the 32bit instruction decoder. Reported-by: Masami Hiramatsu Cc: stable@kernel.org Signed-off-by: Peter Zijlstra Signed-off-by: Ingo Molnar --- arch/x86/kernel/cpu/perf_event_intel_ds.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/x86/kernel/cpu/perf_event_intel_ds.c b/arch/x86/kernel/cpu/perf_event_intel_ds.c index c0d238f49db8..73da6b64f5b7 100644 --- a/arch/x86/kernel/cpu/perf_event_intel_ds.c +++ b/arch/x86/kernel/cpu/perf_event_intel_ds.c @@ -493,6 +493,7 @@ static int intel_pmu_pebs_fixup_ip(struct pt_regs *regs) unsigned long from = cpuc->lbr_entries[0].from; unsigned long old_to, to = cpuc->lbr_entries[0].to; unsigned long ip = regs->ip; + int is_64bit = 0; /* * We don't need to fixup if the PEBS assist is fault like @@ -544,7 +545,10 @@ static int intel_pmu_pebs_fixup_ip(struct pt_regs *regs) } else kaddr = (void *)to; - kernel_insn_init(&insn, kaddr); +#ifdef CONFIG_X86_64 + is_64bit = kernel_ip(to) || !test_thread_flag(TIF_IA32); +#endif + insn_init(&insn, kaddr, is_64bit); insn_get_length(&insn); to += insn.length; } while (to < ip); -- cgit v1.2.1 From aa2bc1ade59003a379ffc485d6da2d92ea3370a6 Mon Sep 17 00:00:00 2001 From: Peter Zijlstra Date: Wed, 9 Nov 2011 17:56:37 +0100 Subject: perf: Don't use -ENOSPC for out of PMU resources People (Linus) objected to using -ENOSPC to signal not having enough resources on the PMU to satisfy the request. Use -EINVAL. Requested-by: Linus Torvalds Cc: Stephane Eranian Cc: Will Deacon Cc: Deng-Cheng Zhu Cc: David Daney Cc: Ralf Baechle Signed-off-by: Peter Zijlstra Link: http://lkml.kernel.org/n/tip-xv8geaz2zpbjhlx0svmpp28n@git.kernel.org [ merged to newer kernel, fixed up MIPS impact ] Signed-off-by: Ingo Molnar --- arch/arm/kernel/perf_event.c | 6 +++--- arch/mips/kernel/perf_event_mipsxx.c | 8 ++++---- arch/x86/kernel/cpu/perf_event.c | 10 +++++----- arch/x86/kernel/cpu/perf_event_p4.c | 2 +- 4 files changed, 13 insertions(+), 13 deletions(-) (limited to 'arch') diff --git a/arch/arm/kernel/perf_event.c b/arch/arm/kernel/perf_event.c index 24e2347be6b1..ff17b17b668e 100644 --- a/arch/arm/kernel/perf_event.c +++ b/arch/arm/kernel/perf_event.c @@ -347,15 +347,15 @@ validate_group(struct perf_event *event) memset(&fake_pmu, 0, sizeof(fake_pmu)); if (!validate_event(&fake_pmu, leader)) - return -ENOSPC; + return -EINVAL; list_for_each_entry(sibling, &leader->sibling_list, group_entry) { if (!validate_event(&fake_pmu, sibling)) - return -ENOSPC; + return -EINVAL; } if (!validate_event(&fake_pmu, event)) - return -ENOSPC; + return -EINVAL; return 0; } diff --git a/arch/mips/kernel/perf_event_mipsxx.c b/arch/mips/kernel/perf_event_mipsxx.c index 4f2971bcf8e5..315fc0b250f8 100644 --- a/arch/mips/kernel/perf_event_mipsxx.c +++ b/arch/mips/kernel/perf_event_mipsxx.c @@ -623,7 +623,7 @@ static int mipspmu_event_init(struct perf_event *event) if (!atomic_inc_not_zero(&active_events)) { if (atomic_read(&active_events) > MIPS_MAX_HWEVENTS) { atomic_dec(&active_events); - return -ENOSPC; + return -EINVAL; } mutex_lock(&pmu_reserve_mutex); @@ -732,15 +732,15 @@ static int validate_group(struct perf_event *event) memset(&fake_cpuc, 0, sizeof(fake_cpuc)); if (!validate_event(&fake_cpuc, leader)) - return -ENOSPC; + return -EINVAL; list_for_each_entry(sibling, &leader->sibling_list, group_entry) { if (!validate_event(&fake_cpuc, sibling)) - return -ENOSPC; + return -EINVAL; } if (!validate_event(&fake_cpuc, event)) - return -ENOSPC; + return -EINVAL; return 0; } diff --git a/arch/x86/kernel/cpu/perf_event.c b/arch/x86/kernel/cpu/perf_event.c index 640891014b2a..ff0e8d498750 100644 --- a/arch/x86/kernel/cpu/perf_event.c +++ b/arch/x86/kernel/cpu/perf_event.c @@ -588,7 +588,7 @@ done: x86_pmu.put_event_constraints(cpuc, cpuc->event_list[i]); } } - return num ? -ENOSPC : 0; + return num ? -EINVAL : 0; } /* @@ -607,7 +607,7 @@ static int collect_events(struct cpu_hw_events *cpuc, struct perf_event *leader, if (is_x86_event(leader)) { if (n >= max_count) - return -ENOSPC; + return -EINVAL; cpuc->event_list[n] = leader; n++; } @@ -620,7 +620,7 @@ static int collect_events(struct cpu_hw_events *cpuc, struct perf_event *leader, continue; if (n >= max_count) - return -ENOSPC; + return -EINVAL; cpuc->event_list[n] = event; n++; @@ -1316,7 +1316,7 @@ static int validate_event(struct perf_event *event) c = x86_pmu.get_event_constraints(fake_cpuc, event); if (!c || !c->weight) - ret = -ENOSPC; + ret = -EINVAL; if (x86_pmu.put_event_constraints) x86_pmu.put_event_constraints(fake_cpuc, event); @@ -1341,7 +1341,7 @@ static int validate_group(struct perf_event *event) { struct perf_event *leader = event->group_leader; struct cpu_hw_events *fake_cpuc; - int ret = -ENOSPC, n; + int ret = -EINVAL, n; fake_cpuc = allocate_fake_cpuc(); if (IS_ERR(fake_cpuc)) diff --git a/arch/x86/kernel/cpu/perf_event_p4.c b/arch/x86/kernel/cpu/perf_event_p4.c index 492bf1358a7c..ef484d9d0a25 100644 --- a/arch/x86/kernel/cpu/perf_event_p4.c +++ b/arch/x86/kernel/cpu/perf_event_p4.c @@ -1268,7 +1268,7 @@ reserve: } done: - return num ? -ENOSPC : 0; + return num ? -EINVAL : 0; } static __initconst const struct x86_pmu p4_pmu = { -- cgit v1.2.1 From ed13ec58bfe0d5dc95f748e6118432cb0fa283cb Mon Sep 17 00:00:00 2001 From: Peter Zijlstra Date: Mon, 14 Nov 2011 10:03:25 +0100 Subject: perf/x86: Enable raw event access to Intel offcore events Now that the core offcore support is fixed up (thanks Stephane) and we have sane generic events utilizing them, re-enable the raw access to the feature as well. Note that it doesn't matter if you use event 0x1b7 or 0x1bb to specify an offcore event, either one works and neither guarantees you'll end up on a particular offcore MSR. Based on original patch from: Vince Weaver . Signed-off-by: Peter Zijlstra Cc: Vince Weaver . Cc: Stephane Eranian Link: http://lkml.kernel.org/r/alpine.DEB.2.00.1108031200390.703@cl320.eecs.utk.edu Signed-off-by: Ingo Molnar --- arch/x86/kernel/cpu/perf_event.c | 6 +----- 1 file changed, 1 insertion(+), 5 deletions(-) (limited to 'arch') diff --git a/arch/x86/kernel/cpu/perf_event.c b/arch/x86/kernel/cpu/perf_event.c index ff0e8d498750..2bda212a0010 100644 --- a/arch/x86/kernel/cpu/perf_event.c +++ b/arch/x86/kernel/cpu/perf_event.c @@ -312,12 +312,8 @@ int x86_setup_perfctr(struct perf_event *event) return -EOPNOTSUPP; } - /* - * Do not allow config1 (extended registers) to propagate, - * there's no sane user-space generalization yet: - */ if (attr->type == PERF_TYPE_RAW) - return 0; + return x86_pmu_extra_regs(event->attr.config, event); if (attr->type == PERF_TYPE_HW_CACHE) return set_ext_hw_attr(hwc, event); -- cgit v1.2.1 From ec84d529b689f4ae31813cf74673f3271c36c83a Mon Sep 17 00:00:00 2001 From: Will Deacon Date: Mon, 14 Nov 2011 16:12:52 +0000 Subject: ARM: PMU: re-export release_pmu symbol to modules Commit b0e89590 ("ARM: PMU: move CPU PMU platform device handling and init into perf") inadvertently removed the EXPORT_SYMBOL_GPL on release_pmu, so out-of-tree modules can no longer play nice with perf, even if they tried in the first place. This patch re-exports the symbol. Reported-by: Jon Medhurst (Tixy) Signed-off-by: Will Deacon --- arch/arm/kernel/pmu.c | 1 + 1 file changed, 1 insertion(+) (limited to 'arch') diff --git a/arch/arm/kernel/pmu.c b/arch/arm/kernel/pmu.c index 2c3407ee8576..2334bf8a650a 100644 --- a/arch/arm/kernel/pmu.c +++ b/arch/arm/kernel/pmu.c @@ -33,3 +33,4 @@ release_pmu(enum arm_pmu_type type) { clear_bit_unlock(type, pmu_lock); } +EXPORT_SYMBOL_GPL(release_pmu); -- cgit v1.2.1 From 14e25c5eeb90d4f61cc94933307d04a19738ad2f Mon Sep 17 00:00:00 2001 From: Will Deacon Date: Wed, 16 Nov 2011 10:05:18 +0000 Subject: ARM: PMU: remove pmu_init declaration pmu_init no longer exists, so don't declare it in asm/pmu.h. Reported-by: Pawel Moll Signed-off-by: Will Deacon --- arch/arm/include/asm/pmu.h | 10 ---------- 1 file changed, 10 deletions(-) (limited to 'arch') diff --git a/arch/arm/include/asm/pmu.h b/arch/arm/include/asm/pmu.h index 71d99b83cdb9..0bda22c094a6 100644 --- a/arch/arm/include/asm/pmu.h +++ b/arch/arm/include/asm/pmu.h @@ -55,16 +55,6 @@ reserve_pmu(enum arm_pmu_type type); extern void release_pmu(enum arm_pmu_type type); -/** - * init_pmu() - Initialise the PMU. - * - * Initialise the system ready for PMU enabling. This should typically set the - * IRQ affinity and nothing else. The users (oprofile/perf events etc) will do - * the actual hardware initialisation. - */ -extern int -init_pmu(enum arm_pmu_type type); - #else /* CONFIG_CPU_HAS_PMU */ #include -- cgit v1.2.1 From bf14fc54d6386ccd1ef3f1b0ff69e7a765cf8ded Mon Sep 17 00:00:00 2001 From: Will Deacon Date: Mon, 6 Jun 2011 12:35:46 +0100 Subject: ARM: highbank: convert logical CPU numbers to physical numbers This patch uses the new cpu_logical_map() macro for converting logical CPU numbers into physical numbers when releasing CPUs during the SMP boot and CPU hotplug paths. Acked-by: Rob Herring Signed-off-by: Will Deacon --- arch/arm/mach-highbank/highbank.c | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'arch') diff --git a/arch/arm/mach-highbank/highbank.c b/arch/arm/mach-highbank/highbank.c index b82dcf08e747..88660d500f5b 100644 --- a/arch/arm/mach-highbank/highbank.c +++ b/arch/arm/mach-highbank/highbank.c @@ -22,6 +22,7 @@ #include #include #include +#include #include #include @@ -72,6 +73,9 @@ static void __init highbank_map_io(void) void highbank_set_cpu_jump(int cpu, void *jump_addr) { +#ifdef CONFIG_SMP + cpu = cpu_logical_map(cpu); +#endif writel(BSYM(virt_to_phys(jump_addr)), HB_JUMP_TABLE_VIRT(cpu)); __cpuc_flush_dcache_area(HB_JUMP_TABLE_VIRT(cpu), 16); outer_clean_range(HB_JUMP_TABLE_PHYS(cpu), -- cgit v1.2.1 From eaa142ca3dee1478aca1a645bb0e5a249a33241a Mon Sep 17 00:00:00 2001 From: Will Deacon Date: Tue, 9 Aug 2011 12:24:07 +0100 Subject: ARM: mach-imx: convert logical CPU numbers to physical numbers This patch uses the new cpu_logical_map() macro for converting logical CPU numbers into physical numbers when releasing CPUs during the SMP boot and CPU hotplug paths. Cc: Sascha Hauer Acked-by: Shawn Guo Signed-off-by: Will Deacon --- arch/arm/mach-imx/src.c | 7 +++++++ 1 file changed, 7 insertions(+) (limited to 'arch') diff --git a/arch/arm/mach-imx/src.c b/arch/arm/mach-imx/src.c index 36cacbd0dcc2..a8e33681b732 100644 --- a/arch/arm/mach-imx/src.c +++ b/arch/arm/mach-imx/src.c @@ -14,6 +14,7 @@ #include #include #include +#include #include #define SRC_SCR 0x000 @@ -23,10 +24,15 @@ static void __iomem *src_base; +#ifndef CONFIG_SMP +#define cpu_logical_map(cpu) 0 +#endif + void imx_enable_cpu(int cpu, bool enable) { u32 mask, val; + cpu = cpu_logical_map(cpu); mask = 1 << (BP_SRC_SCR_CORE1_ENABLE + cpu - 1); val = readl_relaxed(src_base + SRC_SCR); val = enable ? val | mask : val & ~mask; @@ -35,6 +41,7 @@ void imx_enable_cpu(int cpu, bool enable) void imx_set_cpu_jump(int cpu, void *jump_addr) { + cpu = cpu_logical_map(cpu); writel_relaxed(BSYM(virt_to_phys(jump_addr)), src_base + SRC_GPR1 + cpu * 8); } -- cgit v1.2.1 From 12b248eba4fd189216cad14b7dd1cfdacdf90cdf Mon Sep 17 00:00:00 2001 From: Kukjin Kim Date: Thu, 17 Nov 2011 01:13:34 +0900 Subject: ARM: S5P: Fix export.h inclusion Commit 32aaeffbd4a7 ("Merge branch 'modsplit-Oct31 2011'...") breaks build like following and this fixes it to add inclusion . arch/arm/plat-s5p/sysmmu.c:302: error: 'THIS_MODULE' undeclared here (not in a function) Signed-off-by: Kukjin Kim --- arch/arm/plat-s5p/sysmmu.c | 1 + 1 file changed, 1 insertion(+) (limited to 'arch') diff --git a/arch/arm/plat-s5p/sysmmu.c b/arch/arm/plat-s5p/sysmmu.c index e1cbc728c775..c8bec9c7655d 100644 --- a/arch/arm/plat-s5p/sysmmu.c +++ b/arch/arm/plat-s5p/sysmmu.c @@ -11,6 +11,7 @@ #include #include #include +#include #include -- cgit v1.2.1 From a69e4c28b2bddc21b5752b1da8f43ab0a817305c Mon Sep 17 00:00:00 2001 From: Kukjin Kim Date: Thu, 17 Nov 2011 01:14:38 +0900 Subject: ARM: SAMSUNG: inclusion export.h instead of module.h Only for THIS_MODULE, the file should be added instead of . Signed-off-by: Kukjin Kim --- arch/arm/mach-s3c64xx/mach-crag6410-module.c | 2 +- arch/arm/plat-s3c24xx/cpu-freq-debugfs.c | 2 +- arch/arm/plat-samsung/pd.c | 2 +- arch/arm/plat-samsung/pwm.c | 2 +- 4 files changed, 4 insertions(+), 4 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-s3c64xx/mach-crag6410-module.c b/arch/arm/mach-s3c64xx/mach-crag6410-module.c index 66668565ee75..f208154b1382 100644 --- a/arch/arm/mach-s3c64xx/mach-crag6410-module.c +++ b/arch/arm/mach-s3c64xx/mach-crag6410-module.c @@ -8,7 +8,7 @@ * published by the Free Software Foundation. */ -#include +#include #include #include diff --git a/arch/arm/plat-s3c24xx/cpu-freq-debugfs.c b/arch/arm/plat-s3c24xx/cpu-freq-debugfs.c index a9276667c2fb..c7adad0e8de0 100644 --- a/arch/arm/plat-s3c24xx/cpu-freq-debugfs.c +++ b/arch/arm/plat-s3c24xx/cpu-freq-debugfs.c @@ -12,7 +12,7 @@ */ #include -#include +#include #include #include #include diff --git a/arch/arm/plat-samsung/pd.c b/arch/arm/plat-samsung/pd.c index efe1d564473e..312b510d86b7 100644 --- a/arch/arm/plat-samsung/pd.c +++ b/arch/arm/plat-samsung/pd.c @@ -11,7 +11,7 @@ */ #include -#include +#include #include #include #include diff --git a/arch/arm/plat-samsung/pwm.c b/arch/arm/plat-samsung/pwm.c index dc1185dcf80d..c559d8438c70 100644 --- a/arch/arm/plat-samsung/pwm.c +++ b/arch/arm/plat-samsung/pwm.c @@ -11,7 +11,7 @@ * the Free Software Foundation; either version 2 of the License. */ -#include +#include #include #include #include -- cgit v1.2.1 From dc2c83582eac2682808b80e9dce7d2cac2b20596 Mon Sep 17 00:00:00 2001 From: Axel Lin Date: Thu, 17 Nov 2011 01:17:18 +0900 Subject: ARM: SAMSUNG: include linux/types.h at gpio-cfg.h Include linux/types.h to fix below build error: CC drivers/power/max8903_charger.o In file included from arch/arm/plat-samsung/include/plat/gpio-fns.h:27, from arch/arm/mach-s3c2410/include/mach/gpio-fns.h:1, from arch/arm/mach-s3c2410/include/mach/gpio.h:27, from /home/axel/repos/git/linux-2.6/arch/arm/include/asm/gpio.h:5, from include/linux/gpio.h:30, from drivers/power/max8903_charger.c:23: arch/arm/plat-samsung/include/plat/gpio-cfg.h:27: error: expected '=', ',', ';', 'asm' or '__attribute__' before 'samsung_gpio_pull_t' arch/arm/plat-samsung/include/plat/gpio-cfg.h:28: error: expected '=', ',', ';', 'asm' or '__attribute__' before 's5p_gpio_drvstr_t' arch/arm/plat-samsung/include/plat/gpio-cfg.h:55: error: expected specifier-qualifier-list before 'samsung_gpio_pull_t' arch/arm/plat-samsung/include/plat/gpio-cfg.h:146: error: expected declaration specifiers or '...' before 'samsung_gpio_pull_t' arch/arm/plat-samsung/include/plat/gpio-cfg.h:154: error: expected '=', ',', ';', 'asm' or '__attribute__' before 's3c_gpio_getpull' arch/arm/plat-samsung/include/plat/gpio-cfg.h:173: error: expected declaration specifiers or '...' before 'samsung_gpio_pull_t' arch/arm/plat-samsung/include/plat/gpio-cfg.h: In function 's3c_gpio_cfgrange_nopull': arch/arm/plat-samsung/include/plat/gpio-cfg.h:178: error: '__force' undeclared (first use in this function) arch/arm/plat-samsung/include/plat/gpio-cfg.h:178: error: (Each undeclared identifier is reported only once arch/arm/plat-samsung/include/plat/gpio-cfg.h:178: error: for each function it appears in.) arch/arm/plat-samsung/include/plat/gpio-cfg.h:178: error: expected ')' before 'samsung_gpio_pull_t' arch/arm/plat-samsung/include/plat/gpio-cfg.h:178: error: expected ')' before numeric constant arch/arm/plat-samsung/include/plat/gpio-cfg.h:178: error: too many arguments to function 's3c_gpio_cfgall_range' arch/arm/plat-samsung/include/plat/gpio-cfg.h: At top level: arch/arm/plat-samsung/include/plat/gpio-cfg.h:197: error: expected '=', ',', ';', 'asm' or '__attribute__' before 's5p_gpio_get_drvstr' arch/arm/plat-samsung/include/plat/gpio-cfg.h:208: error: expected declaration specifiers or '...' before 's5p_gpio_drvstr_t' make[2]: *** [drivers/power/max8903_charger.o] Error 1 make[1]: *** [drivers/power] Error 2 make: *** [drivers] Error 2 Signed-off-by: Axel Lin Cc: stable@kernel.org Signed-off-by: Kukjin Kim --- arch/arm/plat-samsung/include/plat/gpio-cfg.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'arch') diff --git a/arch/arm/plat-samsung/include/plat/gpio-cfg.h b/arch/arm/plat-samsung/include/plat/gpio-cfg.h index d48245bb02b3..df8155b9d4d1 100644 --- a/arch/arm/plat-samsung/include/plat/gpio-cfg.h +++ b/arch/arm/plat-samsung/include/plat/gpio-cfg.h @@ -24,6 +24,8 @@ #ifndef __PLAT_GPIO_CFG_H #define __PLAT_GPIO_CFG_H __FILE__ +#include + typedef unsigned int __bitwise__ samsung_gpio_pull_t; typedef unsigned int __bitwise__ s5p_gpio_drvstr_t; -- cgit v1.2.1 From 4cecf6d401a01d054afc1e5f605bcbfe553cb9b9 Mon Sep 17 00:00:00 2001 From: Salman Qazi Date: Tue, 15 Nov 2011 14:12:06 -0800 Subject: sched, x86: Avoid unnecessary overflow in sched_clock (Added the missing signed-off-by line) In hundreds of days, the __cycles_2_ns calculation in sched_clock has an overflow. cyc * per_cpu(cyc2ns, cpu) exceeds 64 bits, causing the final value to become zero. We can solve this without losing any precision. We can decompose TSC into quotient and remainder of division by the scale factor, and then use this to convert TSC into nanoseconds. Signed-off-by: Salman Qazi Acked-by: John Stultz Reviewed-by: Paul Turner Cc: stable@kernel.org Signed-off-by: Peter Zijlstra Link: http://lkml.kernel.org/r/20111115221121.7262.88871.stgit@dungbeetle.mtv.corp.google.com Signed-off-by: Ingo Molnar --- arch/x86/include/asm/timer.h | 23 ++++++++++++++++++++++- 1 file changed, 22 insertions(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/x86/include/asm/timer.h b/arch/x86/include/asm/timer.h index fa7b9176b76c..431793e5d484 100644 --- a/arch/x86/include/asm/timer.h +++ b/arch/x86/include/asm/timer.h @@ -32,6 +32,22 @@ extern int no_timer_check; * (mathieu.desnoyers@polymtl.ca) * * -johnstul@us.ibm.com "math is hard, lets go shopping!" + * + * In: + * + * ns = cycles * cyc2ns_scale / SC + * + * Although we may still have enough bits to store the value of ns, + * in some cases, we may not have enough bits to store cycles * cyc2ns_scale, + * leading to an incorrect result. + * + * To avoid this, we can decompose 'cycles' into quotient and remainder + * of division by SC. Then, + * + * ns = (quot * SC + rem) * cyc2ns_scale / SC + * = quot * cyc2ns_scale + (rem * cyc2ns_scale) / SC + * + * - sqazi@google.com */ DECLARE_PER_CPU(unsigned long, cyc2ns); @@ -41,9 +57,14 @@ DECLARE_PER_CPU(unsigned long long, cyc2ns_offset); static inline unsigned long long __cycles_2_ns(unsigned long long cyc) { + unsigned long long quot; + unsigned long long rem; int cpu = smp_processor_id(); unsigned long long ns = per_cpu(cyc2ns_offset, cpu); - ns += cyc * per_cpu(cyc2ns, cpu) >> CYC2NS_SCALE_FACTOR; + quot = (cyc >> CYC2NS_SCALE_FACTOR); + rem = cyc & ((1ULL << CYC2NS_SCALE_FACTOR) - 1); + ns += quot * per_cpu(cyc2ns, cpu) + + ((rem * per_cpu(cyc2ns, cpu)) >> CYC2NS_SCALE_FACTOR); return ns; } -- cgit v1.2.1 From 9b7c547f7747991fe62f622698ea1bf470f256f4 Mon Sep 17 00:00:00 2001 From: Shawn Guo Date: Wed, 16 Nov 2011 21:44:33 +0800 Subject: ARM: Update mach-types to fix mxs build breakage MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Add entry m28evk to fix the following mxs build breakage. CHK include/generated/compile.h CC arch/arm/mach-mxs/clock-mx28.o arch/arm/mach-mxs/clock-mx28.c: In function 'clk_misc_init': arch/arm/mach-mxs/clock-mx28.c:748: error: implicit declaration of function 'machine_is_m28evk' make[1]: *** [arch/arm/mach-mxs/clock-mx28.o] Error 1 make: *** [arch/arm/mach-mxs] Error 2 Signed-off-by: Shawn Guo Acked-by: Uwe Kleine-König --- arch/arm/tools/mach-types | 1 + 1 file changed, 1 insertion(+) (limited to 'arch') diff --git a/arch/arm/tools/mach-types b/arch/arm/tools/mach-types index 5bdeef969847..ccbe16f47227 100644 --- a/arch/arm/tools/mach-types +++ b/arch/arm/tools/mach-types @@ -1123,5 +1123,6 @@ blissc MACH_BLISSC BLISSC 3491 thales_adc MACH_THALES_ADC THALES_ADC 3492 ubisys_p9d_evp MACH_UBISYS_P9D_EVP UBISYS_P9D_EVP 3493 atdgp318 MACH_ATDGP318 ATDGP318 3494 +m28evk MACH_M28EVK M28EVK 3613 smdk4212 MACH_SMDK4212 SMDK4212 3638 smdk4412 MACH_SMDK4412 SMDK4412 3765 -- cgit v1.2.1 From e4b3bbe31d9a1e9540c6e9c95f5e7fd92acbcacf Mon Sep 17 00:00:00 2001 From: Eric Miao Date: Fri, 11 Nov 2011 20:11:14 +0800 Subject: ARM: pxa168/gplugd: add the correct SSP device There is no SSP0, but SSP1 is used on gplugd as an I2S port. Acked-by: Tanmay Upadhyay Signed-off-by: Eric Miao --- arch/arm/mach-mmp/gplugd.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/mach-mmp/gplugd.c b/arch/arm/mach-mmp/gplugd.c index 69156568bc41..4665767a4f79 100644 --- a/arch/arm/mach-mmp/gplugd.c +++ b/arch/arm/mach-mmp/gplugd.c @@ -182,7 +182,7 @@ static void __init gplugd_init(void) /* on-chip devices */ pxa168_add_uart(3); - pxa168_add_ssp(0); + pxa168_add_ssp(1); pxa168_add_twsi(0, NULL, ARRAY_AND_SIZE(gplugd_i2c_board_info)); pxa168_add_eth(&gplugd_eth_platform_data); -- cgit v1.2.1 From f475058f48d3acb3c3979311c9532f3113839468 Mon Sep 17 00:00:00 2001 From: Richard Zhao Date: Thu, 17 Nov 2011 18:54:29 +0800 Subject: ARM: imx6q: move clock register map to machine_desc.map_io map_io is the only place to call iotable_init. Signed-off-by: Richard Zhao [shawn.guo: rename imx_clock_map_io() to imx6q_clock_map_io()] Signed-off-by: Shawn Guo --- arch/arm/mach-imx/clock-imx6q.c | 7 +++++-- arch/arm/mach-imx/mach-imx6q.c | 1 + arch/arm/plat-mxc/include/mach/common.h | 1 + 3 files changed, 7 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-imx/clock-imx6q.c b/arch/arm/mach-imx/clock-imx6q.c index 613a1b993bff..039a7abb165a 100644 --- a/arch/arm/mach-imx/clock-imx6q.c +++ b/arch/arm/mach-imx/clock-imx6q.c @@ -1953,14 +1953,17 @@ static struct map_desc imx6q_clock_desc[] = { imx_map_entry(MX6Q, ANATOP, MT_DEVICE), }; +void __init imx6q_clock_map_io(void) +{ + iotable_init(imx6q_clock_desc, ARRAY_SIZE(imx6q_clock_desc)); +} + int __init mx6q_clocks_init(void) { struct device_node *np; void __iomem *base; int i, irq; - iotable_init(imx6q_clock_desc, ARRAY_SIZE(imx6q_clock_desc)); - /* retrieve the freqency of fixed clocks from device tree */ for_each_compatible_node(np, NULL, "fixed-clock") { u32 rate; diff --git a/arch/arm/mach-imx/mach-imx6q.c b/arch/arm/mach-imx/mach-imx6q.c index 8bf5fa349484..9cd860a27af5 100644 --- a/arch/arm/mach-imx/mach-imx6q.c +++ b/arch/arm/mach-imx/mach-imx6q.c @@ -34,6 +34,7 @@ static void __init imx6q_map_io(void) { imx_lluart_map_io(); imx_scu_map_io(); + imx6q_clock_map_io(); } static void __init imx6q_gpio_add_irq_domain(struct device_node *np, diff --git a/arch/arm/plat-mxc/include/mach/common.h b/arch/arm/plat-mxc/include/mach/common.h index 83b745a5e1b7..7a5b6afc0982 100644 --- a/arch/arm/plat-mxc/include/mach/common.h +++ b/arch/arm/plat-mxc/include/mach/common.h @@ -133,4 +133,5 @@ extern void imx53_qsb_common_init(void); extern void imx53_smd_common_init(void); extern int imx6q_set_lpm(enum mxc_cpu_pwr_mode mode); extern void imx6q_pm_init(void); +extern void imx6q_clock_map_io(void); #endif -- cgit v1.2.1 From bce34d14428d35d9a06ddc10cd46ecef311764c9 Mon Sep 17 00:00:00 2001 From: Will Deacon Date: Thu, 17 Nov 2011 15:05:14 +0000 Subject: ARM: perf: initialise used_mask for fake PMU during validation When validating an event group, we call pmu->get_event_idx for each group member in order to check that the group can be scheduled as a unit on an empty PMU. As a result of 3fc2c830 ("ARM: perf: remove event limit from pmu_hw_events"), the used_mask member of struct cpu_hw_events must be setup explicitly, something which we don't do for the fake cpu_hw_events used for validation. This patch sets up an empty used_mask for the fake validation cpu_hw_events, preventing NULL deferences when trying to get the event index. Reported-by: Pawel Moll Signed-off-by: Will Deacon --- arch/arm/kernel/perf_event.c | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/kernel/perf_event.c b/arch/arm/kernel/perf_event.c index 24e2347be6b1..e508066d3d64 100644 --- a/arch/arm/kernel/perf_event.c +++ b/arch/arm/kernel/perf_event.c @@ -343,8 +343,14 @@ validate_group(struct perf_event *event) { struct perf_event *sibling, *leader = event->group_leader; struct pmu_hw_events fake_pmu; + DECLARE_BITMAP(fake_used_mask, ARMPMU_MAX_HWEVENTS); - memset(&fake_pmu, 0, sizeof(fake_pmu)); + /* + * Initialise the fake PMU. We only need to populate the + * used_mask for the purposes of validation. + */ + memset(fake_used_mask, 0, sizeof(fake_used_mask)); + fake_pmu.used_mask = fake_used_mask; if (!validate_event(&fake_pmu, leader)) return -ENOSPC; -- cgit v1.2.1 From 19d7ca2998e095086869318dd2ad966952f5ac82 Mon Sep 17 00:00:00 2001 From: Yoshihiro Shimoda Date: Fri, 18 Nov 2011 16:32:34 +0900 Subject: sh: fix build warning in board-sh7757lcr MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit This patch fixed the following build warnings: CC arch/sh/boards/board-sh7757lcr.o arch/sh/boards/board-sh7757lcr.c:77: warning: initialization from incompatible pointer type arch/sh/boards/board-sh7757lcr.c:106: warning: initialization from incompatible pointer type arch/sh/boards/board-sh7757lcr.c:151: warning: initialization from incompatible pointer type arch/sh/boards/board-sh7757lcr.c:181: warning: initialization from incompatible pointer type arch/sh/boards/board-sh7757lcr.c:213: warning: missing braces around initializer arch/sh/boards/board-sh7757lcr.c:213: warning: (near initialization for ‘sh7757lcr_mmcif_dma.chan_priv_tx’) Signed-off-by: Yoshihiro Shimoda Signed-off-by: Paul Mundt --- arch/sh/boards/board-sh7757lcr.c | 16 ++++++++++------ 1 file changed, 10 insertions(+), 6 deletions(-) (limited to 'arch') diff --git a/arch/sh/boards/board-sh7757lcr.c b/arch/sh/boards/board-sh7757lcr.c index ec8c84c14b17..895e337c79b6 100644 --- a/arch/sh/boards/board-sh7757lcr.c +++ b/arch/sh/boards/board-sh7757lcr.c @@ -50,9 +50,9 @@ static struct platform_device heartbeat_device = { #define GBECONT 0xffc10100 #define GBECONT_RMII1 BIT(17) #define GBECONT_RMII0 BIT(16) -static void sh7757_eth_set_mdio_gate(unsigned long addr) +static void sh7757_eth_set_mdio_gate(void *addr) { - if ((addr & 0x00000fff) < 0x0800) + if (((unsigned long)addr & 0x00000fff) < 0x0800) writel(readl(GBECONT) | GBECONT_RMII0, GBECONT); else writel(readl(GBECONT) | GBECONT_RMII1, GBECONT); @@ -116,9 +116,9 @@ static struct platform_device sh7757_eth1_device = { }, }; -static void sh7757_eth_giga_set_mdio_gate(unsigned long addr) +static void sh7757_eth_giga_set_mdio_gate(void *addr) { - if ((addr & 0x00000fff) < 0x0800) { + if (((unsigned long)addr & 0x00000fff) < 0x0800) { gpio_set_value(GPIO_PTT4, 1); writel(readl(GBECONT) & ~GBECONT_RMII0, GBECONT); } else { @@ -210,8 +210,12 @@ static struct resource sh_mmcif_resources[] = { }; static struct sh_mmcif_dma sh7757lcr_mmcif_dma = { - .chan_priv_tx = SHDMA_SLAVE_MMCIF_TX, - .chan_priv_rx = SHDMA_SLAVE_MMCIF_RX, + .chan_priv_tx = { + .slave_id = SHDMA_SLAVE_MMCIF_TX, + }, + .chan_priv_rx = { + .slave_id = SHDMA_SLAVE_MMCIF_RX, + } }; static struct sh_mmcif_plat_data sh_mmcif_plat = { -- cgit v1.2.1 From 11ed0ba1754841316d4095478944300acf19acc3 Mon Sep 17 00:00:00 2001 From: Will Deacon Date: Mon, 14 Nov 2011 17:24:58 +0100 Subject: ARM: 7161/1: errata: no automatic store buffer drain This patch implements a workaround for PL310 erratum 769419. On revisions of the PL310 prior to r3p2, the Store Buffer does not automatically drain. This can cause normal, non-cacheable writes to be retained when the memory system is idle, leading to suboptimal I/O performance for drivers using coherent DMA. This patch adds an optional wmb() call to the cpu_idle loop. On systems with an outer cache, this causes an explicit flush of the store buffer. Cc: stable@vger.kernel.org Acked-by: Catalin Marinas Tested-by: Marc Zyngier Signed-off-by: Will Deacon Signed-off-by: Russell King --- arch/arm/Kconfig | 12 ++++++++++++ arch/arm/kernel/process.c | 3 +++ 2 files changed, 15 insertions(+) (limited to 'arch') diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 44789eff983f..83aa746e71d6 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -1352,6 +1352,18 @@ config ARM_ERRATA_764369 relevant cache maintenance functions and sets a specific bit in the diagnostic control register of the SCU. +config PL310_ERRATA_769419 + bool "PL310 errata: no automatic Store Buffer drain" + depends on CACHE_L2X0 + help + On revisions of the PL310 prior to r3p2, the Store Buffer does + not automatically drain. This can cause normal, non-cacheable + writes to be retained when the memory system is idle, leading + to suboptimal I/O performance for drivers using coherent DMA. + This option adds a write barrier to the cpu_idle loop so that, + on systems with an outer cache, the store buffer is drained + explicitly. + endmenu source "arch/arm/common/Kconfig" diff --git a/arch/arm/kernel/process.c b/arch/arm/kernel/process.c index 75316f0dd02a..3d0c6fb74ae4 100644 --- a/arch/arm/kernel/process.c +++ b/arch/arm/kernel/process.c @@ -192,6 +192,9 @@ void cpu_idle(void) #endif local_irq_disable(); +#ifdef CONFIG_PL310_ERRATA_769419 + wmb(); +#endif if (hlt_counter) { local_irq_enable(); cpu_relax(); -- cgit v1.2.1 From fa0ce4035d4897b0642132866d896a906429f45e Mon Sep 17 00:00:00 2001 From: Will Deacon Date: Mon, 14 Nov 2011 17:24:57 +0100 Subject: ARM: 7162/1: errata: tidy up Kconfig options for PL310 errata workarounds The Kconfig options for the PL310 errata workarounds do not use a consistent naming scheme for either the config option or the bool description. This patch tidies up the options by ensuring that the bool descriptions are prefixed with "PL310 errata:" and the config options are prefixed with PL310_ERRATA_, making it much clearer in menuconfig as to what the workarounds are for. Signed-off-by: Will Deacon Signed-off-by: Russell King --- arch/arm/Kconfig | 8 ++++---- arch/arm/mm/cache-l2x0.c | 2 +- 2 files changed, 5 insertions(+), 5 deletions(-) (limited to 'arch') diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 83aa746e71d6..e084b7e981e8 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -1231,7 +1231,7 @@ config ARM_ERRATA_742231 capabilities of the processor. config PL310_ERRATA_588369 - bool "Clean & Invalidate maintenance operations do not invalidate clean lines" + bool "PL310 errata: Clean & Invalidate maintenance operations do not invalidate clean lines" depends on CACHE_L2X0 help The PL310 L2 cache controller implements three types of Clean & @@ -1256,7 +1256,7 @@ config ARM_ERRATA_720789 entries regardless of the ASID. config PL310_ERRATA_727915 - bool "Background Clean & Invalidate by Way operation can cause data corruption" + bool "PL310 errata: Background Clean & Invalidate by Way operation can cause data corruption" depends on CACHE_L2X0 help PL310 implements the Clean & Invalidate by Way L2 cache maintenance @@ -1289,8 +1289,8 @@ config ARM_ERRATA_751472 operation is received by a CPU before the ICIALLUIS has completed, potentially leading to corrupted entries in the cache or TLB. -config ARM_ERRATA_753970 - bool "ARM errata: cache sync operation may be faulty" +config PL310_ERRATA_753970 + bool "PL310 errata: cache sync operation may be faulty" depends on CACHE_PL310 help This option enables the workaround for the 753970 PL310 (r3p0) erratum. diff --git a/arch/arm/mm/cache-l2x0.c b/arch/arm/mm/cache-l2x0.c index 8ac9e9f84790..b1e192ba8c24 100644 --- a/arch/arm/mm/cache-l2x0.c +++ b/arch/arm/mm/cache-l2x0.c @@ -61,7 +61,7 @@ static inline void cache_sync(void) { void __iomem *base = l2x0_base; -#ifdef CONFIG_ARM_ERRATA_753970 +#ifdef CONFIG_PL310_ERRATA_753970 /* write to an unmmapped register */ writel_relaxed(0, base + L2X0_DUMMY_REG); #else -- cgit v1.2.1 From 2674dd0b1c07d8b8dfb4872fc7b41841f05cb957 Mon Sep 17 00:00:00 2001 From: Javi Merino Date: Wed, 16 Nov 2011 12:21:24 +0100 Subject: ARM: 7163/2: PL330: Only register usable channels When the manager is running non-secure, the only channels that can issue interrupts are the ones that have a 1 in their corresponding bit in Configuration Register 3. The other ones will generate an abort when trying to signal the end of the transaction so they are useless in non-secure mode. Reference: <1320244259-10496-2-git-send-email-javi.merino@arm.com> Signed-off-by: Javi Merino Acked-by: Jassi Brar Signed-off-by: Russell King --- arch/arm/common/pl330.c | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/common/pl330.c b/arch/arm/common/pl330.c index 7129cfbdacd6..f748a385693f 100644 --- a/arch/arm/common/pl330.c +++ b/arch/arm/common/pl330.c @@ -1623,6 +1623,11 @@ static inline int _alloc_event(struct pl330_thread *thrd) return -1; } +static bool _chan_ns(const struct pl330_info *pi, int i) +{ + return pi->pcfg.irq_ns & (1 << i); +} + /* Upon success, returns IdentityToken for the * allocated channel, NULL otherwise. */ @@ -1647,7 +1652,8 @@ void *pl330_request_channel(const struct pl330_info *pi) for (i = 0; i < chans; i++) { thrd = &pl330->channels[i]; - if (thrd->free) { + if ((thrd->free) && (!_manager_ns(thrd) || + _chan_ns(pi, i))) { thrd->ev = _alloc_event(thrd); if (thrd->ev >= 0) { thrd->free = false; -- cgit v1.2.1 From 1c8a7c1fbfc7ae2362d26559df26b99c806b68b5 Mon Sep 17 00:00:00 2001 From: Javi Merino Date: Wed, 16 Nov 2011 12:45:39 +0100 Subject: ARM: 7165/2: PL330: Fix typo in _prepare_ccr() scctl should be shifted by CC_SRCCTRL_SHFT and dcctl by CC_DSTCCTRL_SHFT, not the other way round. Reference: <1320244259-10496-4-git-send-email-javi.merino@arm.com> Signed-off-by: Javi Merino Acked-by: Jassi Brar Signed-off-by: Russell King --- arch/arm/common/pl330.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/arm/common/pl330.c b/arch/arm/common/pl330.c index f748a385693f..f407a6b35d3d 100644 --- a/arch/arm/common/pl330.c +++ b/arch/arm/common/pl330.c @@ -1211,8 +1211,8 @@ static inline u32 _prepare_ccr(const struct pl330_reqcfg *rqc) ccr |= (rqc->brst_size << CC_SRCBRSTSIZE_SHFT); ccr |= (rqc->brst_size << CC_DSTBRSTSIZE_SHFT); - ccr |= (rqc->dcctl << CC_SRCCCTRL_SHFT); - ccr |= (rqc->scctl << CC_DSTCCTRL_SHFT); + ccr |= (rqc->scctl << CC_SRCCCTRL_SHFT); + ccr |= (rqc->dcctl << CC_DSTCCTRL_SHFT); ccr |= (rqc->swap << CC_SWAP_SHFT); -- cgit v1.2.1 From 53cbcbcf4362ef39e0a692b1d23c395999397fca Mon Sep 17 00:00:00 2001 From: Catalin Marinas Date: Thu, 17 Nov 2011 13:11:21 +0100 Subject: ARM: 7166/1: Use PMD_SHIFT instead of PGDIR_SHIFT in dma-consistent.c Commit 99d1717d (ARM: Add init_consistent_dma_size()) introduces dynamic allocation of the consistent_pte array. The number of PTEs should be calculated based on the number of PMD entries rather than PGD, hence the PMD_SHIFT. Signed-off-by: Catalin Marinas Cc: Jon Medhurst Acked-by: Nicolas Pitre Signed-off-by: Russell King --- arch/arm/mm/dma-mapping.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/mm/dma-mapping.c b/arch/arm/mm/dma-mapping.c index e4e7f6cba1ab..ab584569930e 100644 --- a/arch/arm/mm/dma-mapping.c +++ b/arch/arm/mm/dma-mapping.c @@ -168,7 +168,7 @@ static int __init consistent_init(void) pte_t *pte; int i = 0; unsigned long base = consistent_base; - unsigned long num_ptes = (CONSISTENT_END - base) >> PGDIR_SHIFT; + unsigned long num_ptes = (CONSISTENT_END - base) >> PMD_SHIFT; consistent_pte = kmalloc(num_ptes * sizeof(pte_t), GFP_KERNEL); if (!consistent_pte) { -- cgit v1.2.1 From e760b5260d39113794da17c64cbd6e6311155b66 Mon Sep 17 00:00:00 2001 From: Paul Bolle Date: Mon, 21 Nov 2011 14:34:05 +0100 Subject: ARM: imx: drop 'ARCH_MX31' and 'ARCH_MX35' Commit 27ad4bf72a ("ARM: imx: move mx3 support to mach-imx") kept ARCH_MX31 and ARCH_MX35 'for compatibility'. Now that they aren't actually used anymore, they can be dropped entirely. Signed-off-by: Paul Bolle Signed-off-by: Sascha Hauer --- arch/arm/mach-imx/Kconfig | 13 ------------- 1 file changed, 13 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig index 5f7f9c2a34ae..c44aa974e79c 100644 --- a/arch/arm/mach-imx/Kconfig +++ b/arch/arm/mach-imx/Kconfig @@ -10,11 +10,6 @@ config HAVE_IMX_MMDC config HAVE_IMX_SRC bool -# -# ARCH_MX31 and ARCH_MX35 are left for compatibility -# Some usages assume that having one of them implies not having (e.g.) ARCH_MX2. -# To easily distinguish good and reviewed from unreviewed usages new (and IMHO -# more sensible) names are used: SOC_IMX31 and SOC_IMX35 config ARCH_MX1 bool @@ -27,12 +22,6 @@ config ARCH_MX25 config MACH_MX27 bool -config ARCH_MX31 - bool - -config ARCH_MX35 - bool - config SOC_IMX1 bool select ARCH_MX1 @@ -72,7 +61,6 @@ config SOC_IMX31 select CPU_V6 select IMX_HAVE_PLATFORM_MXC_RNGA select ARCH_MXC_AUDMUX_V2 - select ARCH_MX31 select MXC_AVIC select SMP_ON_UP if SMP @@ -82,7 +70,6 @@ config SOC_IMX35 select ARCH_MXC_IOMUX_V3 select ARCH_MXC_AUDMUX_V2 select HAVE_EPIT - select ARCH_MX35 select MXC_AVIC select SMP_ON_UP if SMP -- cgit v1.2.1 From ca06679d758933b726c2677b523a26bc581eadcf Mon Sep 17 00:00:00 2001 From: Fabio Estevam Date: Mon, 21 Nov 2011 16:26:52 -0200 Subject: ARM: mx5: Fix checkpatch warnings in cpu-imx5.c Fix the following warnings reported by checkpatch: WARNING: Use #include instead of #19: FILE: arm/mach-imx/cpu-imx5.c:19: +#include WARNING: line over 80 characters #70: FILE: arm/mach-imx/cpu-imx5.c:70: + if (mx51_revision() < IMX_CHIP_REVISION_3_0 && (elf_hwcap & HWCAP_NEON)) { Signed-off-by: Fabio Estevam Signed-off-by: Sascha Hauer --- arch/arm/mach-mx5/cpu.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-mx5/cpu.c b/arch/arm/mach-mx5/cpu.c index 5c5328257dca..5e2e7a843860 100644 --- a/arch/arm/mach-mx5/cpu.c +++ b/arch/arm/mach-mx5/cpu.c @@ -16,7 +16,7 @@ #include #include #include -#include +#include static int mx5_cpu_rev = -1; @@ -67,7 +67,8 @@ static int __init mx51_neon_fixup(void) if (!cpu_is_mx51()) return 0; - if (mx51_revision() < IMX_CHIP_REVISION_3_0 && (elf_hwcap & HWCAP_NEON)) { + if (mx51_revision() < IMX_CHIP_REVISION_3_0 && + (elf_hwcap & HWCAP_NEON)) { elf_hwcap &= ~HWCAP_NEON; pr_info("Turning off NEON support, detected broken NEON implementation\n"); } -- cgit v1.2.1 From 87514fced7c347a7cdd8a7a346d935a168428ff7 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Uwe=20Kleine-K=C3=B6nig?= Date: Tue, 22 Nov 2011 10:07:26 +0100 Subject: ARM: imx/mm-imx3: conditionally compile i.MX31 and i.MX35 code MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit This fixes building a kernel for only one of the two SOCs. Without this patch an i.MX31 only build fails with: arch/arm/mach-imx/built-in.o: In function `imx35_init_early': mach-bug.c:(.init.text+0x2c): undefined reference to `mxc_iomux_v3_init' arch/arm/mach-imx/built-in.o: In function `imx35_soc_init': mach-bug.c:(.init.text+0xe4): undefined reference to `mx35_revision' Signed-off-by: Uwe Kleine-König Signed-off-by: Sascha Hauer --- arch/arm/mach-imx/mm-imx3.c | 58 ++++++++++++++++++++++++--------------------- 1 file changed, 31 insertions(+), 27 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-imx/mm-imx3.c b/arch/arm/mach-imx/mm-imx3.c index 9f0e82ec3398..72613c4b0e72 100644 --- a/arch/arm/mach-imx/mm-imx3.c +++ b/arch/arm/mach-imx/mm-imx3.c @@ -108,6 +108,7 @@ void imx3_init_l2x0(void) l2x0_init(l2x0_base, 0x00030024, 0x00000000); } +#ifdef CONFIG_SOC_IMX31 static struct map_desc mx31_io_desc[] __initdata = { imx_map_entry(MX31, X_MEMC, MT_DEVICE), imx_map_entry(MX31, AVIC, MT_DEVICE_NONSHARED), @@ -126,19 +127,6 @@ void __init mx31_map_io(void) iotable_init(mx31_io_desc, ARRAY_SIZE(mx31_io_desc)); } -static struct map_desc mx35_io_desc[] __initdata = { - imx_map_entry(MX35, X_MEMC, MT_DEVICE), - imx_map_entry(MX35, AVIC, MT_DEVICE_NONSHARED), - imx_map_entry(MX35, AIPS1, MT_DEVICE_NONSHARED), - imx_map_entry(MX35, AIPS2, MT_DEVICE_NONSHARED), - imx_map_entry(MX35, SPBA0, MT_DEVICE_NONSHARED), -}; - -void __init mx35_map_io(void) -{ - iotable_init(mx35_io_desc, ARRAY_SIZE(mx35_io_desc)); -} - void __init imx31_init_early(void) { mxc_set_cpu_type(MXC_CPU_MX31); @@ -147,25 +135,11 @@ void __init imx31_init_early(void) imx_ioremap = imx3_ioremap; } -void __init imx35_init_early(void) -{ - mxc_set_cpu_type(MXC_CPU_MX35); - mxc_iomux_v3_init(MX35_IO_ADDRESS(MX35_IOMUXC_BASE_ADDR)); - mxc_arch_reset_init(MX35_IO_ADDRESS(MX35_WDOG_BASE_ADDR)); - imx_idle = imx3_idle; - imx_ioremap = imx3_ioremap; -} - void __init mx31_init_irq(void) { mxc_init_irq(MX31_IO_ADDRESS(MX31_AVIC_BASE_ADDR)); } -void __init mx35_init_irq(void) -{ - mxc_init_irq(MX35_IO_ADDRESS(MX35_AVIC_BASE_ADDR)); -} - static struct sdma_script_start_addrs imx31_to1_sdma_script __initdata = { .per_2_per_addr = 1677, }; @@ -199,6 +173,35 @@ void __init imx31_soc_init(void) imx_add_imx_sdma("imx31-sdma", MX31_SDMA_BASE_ADDR, MX31_INT_SDMA, &imx31_sdma_pdata); } +#endif /* ifdef CONFIG_SOC_IMX31 */ + +#ifdef CONFIG_SOC_IMX35 +static struct map_desc mx35_io_desc[] __initdata = { + imx_map_entry(MX35, X_MEMC, MT_DEVICE), + imx_map_entry(MX35, AVIC, MT_DEVICE_NONSHARED), + imx_map_entry(MX35, AIPS1, MT_DEVICE_NONSHARED), + imx_map_entry(MX35, AIPS2, MT_DEVICE_NONSHARED), + imx_map_entry(MX35, SPBA0, MT_DEVICE_NONSHARED), +}; + +void __init mx35_map_io(void) +{ + iotable_init(mx35_io_desc, ARRAY_SIZE(mx35_io_desc)); +} + +void __init imx35_init_early(void) +{ + mxc_set_cpu_type(MXC_CPU_MX35); + mxc_iomux_v3_init(MX35_IO_ADDRESS(MX35_IOMUXC_BASE_ADDR)); + mxc_arch_reset_init(MX35_IO_ADDRESS(MX35_WDOG_BASE_ADDR)); + imx_idle = imx3_idle; + imx_ioremap = imx3_ioremap; +} + +void __init mx35_init_irq(void) +{ + mxc_init_irq(MX35_IO_ADDRESS(MX35_AVIC_BASE_ADDR)); +} static struct sdma_script_start_addrs imx35_to1_sdma_script __initdata = { .ap_2_ap_addr = 642, @@ -254,3 +257,4 @@ void __init imx35_soc_init(void) imx_add_imx_sdma("imx35-sdma", MX35_SDMA_BASE_ADDR, MX35_INT_SDMA, &imx35_sdma_pdata); } +#endif /* ifdef CONFIG_SOC_IMX35 */ -- cgit v1.2.1 From 807dfe7041fb1ff2b076b999800553440e61234d Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Sat, 8 Oct 2011 17:16:49 +0200 Subject: ARM: imx: export imx_ioremap The arch_ioremap function on i.MX is now an indirect function pointer. In order to use it from any loadable module, the pointer itself has to be exported. ERROR: "imx_ioremap" [drivers/video/tmiofb.ko] undefined! ERROR: "imx_ioremap" [drivers/usb/host/sl811-hcd.ko] undefined! ERROR: "imx_ioremap" [drivers/usb/host/r8a66597-hcd.ko] undefined! ERROR: "imx_ioremap" [drivers/usb/host/oxu210hp-hcd.ko] undefined! ERROR: "imx_ioremap" [drivers/usb/gadget/r8a66597-udc.ko] undefined! Signed-off-by: Arnd Bergmann Acked-by: Shawn Guo Signed-off-by: Sascha Hauer --- arch/arm/plat-mxc/system.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'arch') diff --git a/arch/arm/plat-mxc/system.c b/arch/arm/plat-mxc/system.c index 9dad8dcc2ea9..45e1b5f6be44 100644 --- a/arch/arm/plat-mxc/system.c +++ b/arch/arm/plat-mxc/system.c @@ -21,6 +21,7 @@ #include #include #include +#include #include #include @@ -30,6 +31,7 @@ void (*imx_idle)(void) = NULL; void __iomem *(*imx_ioremap)(unsigned long, size_t, unsigned int) = NULL; +EXPORT_SYMBOL_GPL(imx_ioremap); static void __iomem *wdog_base; -- cgit v1.2.1 From e5a21327644adba32816f74a415114d11c57f2e9 Mon Sep 17 00:00:00 2001 From: Will Deacon Date: Tue, 22 Nov 2011 18:01:46 +0000 Subject: ARM: perf: check that we have a platform device when reserving PMU Attempting to use a hardware counter on a platform with a supported PMU but where the platform_device (defining the interrupts) has not been registered results in a NULL pointer dereference. This patch fixes the problem by checking that we actually have a platform device registered before attempting to grab the interrupts. Reported-by: Pawel Moll Signed-off-by: Will Deacon --- arch/arm/kernel/perf_event.c | 3 +++ 1 file changed, 3 insertions(+) (limited to 'arch') diff --git a/arch/arm/kernel/perf_event.c b/arch/arm/kernel/perf_event.c index e508066d3d64..c475379199b1 100644 --- a/arch/arm/kernel/perf_event.c +++ b/arch/arm/kernel/perf_event.c @@ -402,6 +402,9 @@ armpmu_reserve_hardware(struct arm_pmu *armpmu) int i, err, irq, irqs; struct platform_device *pmu_device = armpmu->plat_device; + if (!pmu_device) + return -ENODEV; + err = reserve_pmu(armpmu->type); if (err) { pr_warning("unable to reserve pmu\n"); -- cgit v1.2.1 From c2735391fbc68feae10d6d14e60956c8106e725f Mon Sep 17 00:00:00 2001 From: Wolfram Sang Date: Sat, 10 Sep 2011 12:26:07 +0200 Subject: arm: mx28: fix bit operation in clock setting reg | (1 << clk->enable_shift) always evaluates to true. Switch it to & which makes much more sense. Same fix as 13be9f00 (ARM i.MX28: fix bit operation) at a different location. Signed-off-by: Wolfram Sang Cc: Sascha Hauer Cc: Shawn Guo Signed-off-by: Shawn Guo Cc: stable@kernel.org Signed-off-by: Arnd Bergmann --- arch/arm/mach-mxs/clock-mx28.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/mach-mxs/clock-mx28.c b/arch/arm/mach-mxs/clock-mx28.c index 229ae3494216..da6e4aad177c 100644 --- a/arch/arm/mach-mxs/clock-mx28.c +++ b/arch/arm/mach-mxs/clock-mx28.c @@ -404,7 +404,7 @@ static int name##_set_rate(struct clk *clk, unsigned long rate) \ reg = __raw_readl(CLKCTRL_BASE_ADDR + HW_CLKCTRL_##dr); \ reg &= ~BM_CLKCTRL_##dr##_DIV; \ reg |= div << BP_CLKCTRL_##dr##_DIV; \ - if (reg | (1 << clk->enable_shift)) { \ + if (reg & (1 << clk->enable_shift)) { \ pr_err("%s: clock is gated\n", __func__); \ return -EINVAL; \ } \ -- cgit v1.2.1 From cc1b0765da6078b906772b79ff211b88cc0ae958 Mon Sep 17 00:00:00 2001 From: sricharan Date: Wed, 23 Nov 2011 14:35:07 -0800 Subject: ARM: OMAP: hwmod: Fix the addr space, irq, dma count APIs The address spaces, irqs and dma reqs count APIs return the number of corresponding entries in a hwmod including a additional null value or a -1 terminator in the structure introduced recently. More information here: - 212738a4: omap_hwmod: use a terminator record with omap_hwmod_mpu_irqs arrays - 78183f3f: omap_hwmod: use a null structure record to terminate omap_hwmod_addr_space arrays - bc614958: omap_hwmod: use a terminator record with omap_hwmod_dma_info arrays The issue with irqs and dma info was originally reported by Benoit Cousson. The devices which have multiple hwmods and use device_build_ss are broken with this, as their resources are populated with a extra null value, subsequently the probe fails. So fix the API not to include the array terminator in the count. Reported-by: Benoit Cousson Signed-off-by: Santosh Shilimkar Signed-off-by: sricharan Signed-off-by: Benoit Cousson Cc: Paul Walmsley Cc: stable@vger.kernel.org Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/omap_hwmod.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-omap2/omap_hwmod.c b/arch/arm/mach-omap2/omap_hwmod.c index 6b3088db83b7..207a2ff9a8c4 100644 --- a/arch/arm/mach-omap2/omap_hwmod.c +++ b/arch/arm/mach-omap2/omap_hwmod.c @@ -749,7 +749,7 @@ static int _count_mpu_irqs(struct omap_hwmod *oh) ohii = &oh->mpu_irqs[i++]; } while (ohii->irq != -1); - return i; + return i-1; } /** @@ -772,7 +772,7 @@ static int _count_sdma_reqs(struct omap_hwmod *oh) ohdi = &oh->sdma_reqs[i++]; } while (ohdi->dma_req != -1); - return i; + return i-1; } /** @@ -795,7 +795,7 @@ static int _count_ocp_if_addr_spaces(struct omap_hwmod_ocp_if *os) mem = &os->addr[i++]; } while (mem->pa_start != mem->pa_end); - return i; + return i-1; } /** -- cgit v1.2.1 From 46232a3622c6e33605906ee6690dfef372925f53 Mon Sep 17 00:00:00 2001 From: Kevin Hilman Date: Wed, 23 Nov 2011 14:43:01 -0800 Subject: ARM: OMAP: PM: only register TWL with voltage layer when device is present Current code registers voltage layer details for TWL PMIC even when a TWL has not been registered. Fix this to only register the TWL with voltage layer when the TWL PMIC is initialized by board-level code. Signed-off-by: Kevin Hilman Cc: stable@vger.kernel.org Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/pm.c | 6 ++---- arch/arm/mach-omap2/twl-common.c | 11 +++++++++++ arch/arm/mach-omap2/twl-common.h | 3 +++ 3 files changed, 16 insertions(+), 4 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-omap2/pm.c b/arch/arm/mach-omap2/pm.c index 1e79bdf313e3..00bff46ca48b 100644 --- a/arch/arm/mach-omap2/pm.c +++ b/arch/arm/mach-omap2/pm.c @@ -24,6 +24,7 @@ #include "powerdomain.h" #include "clockdomain.h" #include "pm.h" +#include "twl-common.h" static struct omap_device_pm_latency *pm_lats; @@ -226,11 +227,8 @@ postcore_initcall(omap2_common_pm_init); static int __init omap2_common_pm_late_init(void) { - /* Init the OMAP TWL parameters */ - omap3_twl_init(); - omap4_twl_init(); - /* Init the voltage layer */ + omap_pmic_late_init(); omap_voltage_late_init(); /* Initialize the voltages */ diff --git a/arch/arm/mach-omap2/twl-common.c b/arch/arm/mach-omap2/twl-common.c index 522435772168..10b20c652e5d 100644 --- a/arch/arm/mach-omap2/twl-common.c +++ b/arch/arm/mach-omap2/twl-common.c @@ -30,6 +30,7 @@ #include #include "twl-common.h" +#include "pm.h" static struct i2c_board_info __initdata pmic_i2c_board_info = { .addr = 0x48, @@ -48,6 +49,16 @@ void __init omap_pmic_init(int bus, u32 clkrate, omap_register_i2c_bus(bus, clkrate, &pmic_i2c_board_info, 1); } +void __init omap_pmic_late_init(void) +{ + /* Init the OMAP TWL parameters (if PMIC has been registerd) */ + if (!pmic_i2c_board_info.irq) + return; + + omap3_twl_init(); + omap4_twl_init(); +} + #if defined(CONFIG_ARCH_OMAP3) static struct twl4030_usb_data omap3_usb_pdata = { .usb_mode = T2_USB_MODE_ULPI, diff --git a/arch/arm/mach-omap2/twl-common.h b/arch/arm/mach-omap2/twl-common.h index 5e83a5bd37fb..275dde8cb27a 100644 --- a/arch/arm/mach-omap2/twl-common.h +++ b/arch/arm/mach-omap2/twl-common.h @@ -1,6 +1,8 @@ #ifndef __OMAP_PMIC_COMMON__ #define __OMAP_PMIC_COMMON__ +#include + #define TWL_COMMON_PDATA_USB (1 << 0) #define TWL_COMMON_PDATA_BCI (1 << 1) #define TWL_COMMON_PDATA_MADC (1 << 2) @@ -30,6 +32,7 @@ struct twl4030_platform_data; void omap_pmic_init(int bus, u32 clkrate, const char *pmic_type, int pmic_irq, struct twl4030_platform_data *pmic_data); +void omap_pmic_late_init(void); static inline void omap2_pmic_init(const char *pmic_type, struct twl4030_platform_data *pmic_data) -- cgit v1.2.1 From 5a4f1844c2ba21f804d7729306d9b16eaeb724a8 Mon Sep 17 00:00:00 2001 From: Felipe Balbi Date: Wed, 23 Nov 2011 14:43:37 -0800 Subject: ARM: OMAP: smartreflex: fix IRQ handling bug Fix a bug which has been on this driver since it was added by the original commit 984aa6db which would never clear IRQSTATUS bits. Signed-off-by: Felipe Balbi Signed-off-by: Kevin Hilman Cc: stable@vger.kernel.org Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/smartreflex.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/mach-omap2/smartreflex.c b/arch/arm/mach-omap2/smartreflex.c index 6a4f6839a7d9..cf246b39bac7 100644 --- a/arch/arm/mach-omap2/smartreflex.c +++ b/arch/arm/mach-omap2/smartreflex.c @@ -139,7 +139,7 @@ static irqreturn_t sr_interrupt(int irq, void *data) sr_write_reg(sr_info, ERRCONFIG_V1, status); } else if (sr_info->ip_type == SR_TYPE_V2) { /* Read the status bits */ - sr_read_reg(sr_info, IRQSTATUS); + status = sr_read_reg(sr_info, IRQSTATUS); /* Clear them by writing back */ sr_write_reg(sr_info, IRQSTATUS, status); -- cgit v1.2.1 From a8a6565c7615cab3608d75af95b5c8a3522cd7c4 Mon Sep 17 00:00:00 2001 From: Ming Lei Date: Wed, 23 Nov 2011 14:44:50 -0800 Subject: ARM: OMAP2: select ARM_AMBA if OMAP3_EMU is defined This patch selects ARM_AMBA if OMAP3_EMU is defined because OC_ETM depends on ARM_AMBA, so fix the link failure[1]. [1], arch/arm/kernel/built-in.o: In function `etm_remove': /home/tom/git/omap/linux-2.6-omap/arch/arm/kernel/etm.c:609: undefined reference to `amba_release_regions' arch/arm/kernel/built-in.o: In function `etb_remove': /home/tom/git/omap/linux-2.6-omap/arch/arm/kernel/etm.c:409: undefined reference to `amba_release_regions' arch/arm/kernel/built-in.o: In function `etm_init': /home/tom/git/omap/linux-2.6-omap/arch/arm/kernel/etm.c:640: undefined reference to `amba_driver_register' /home/tom/git/omap/linux-2.6-omap/arch/arm/kernel/etm.c:646: undefined reference to `amba_driver_register' /home/tom/git/omap/linux-2.6-omap/arch/arm/kernel/etm.c:648: undefined reference to `amba_driver_unregister' arch/arm/kernel/built-in.o: In function `etm_probe': /home/tom/git/omap/linux-2.6-omap/arch/arm/kernel/etm.c:545: undefined reference to `amba_request_regions' /home/tom/git/omap/linux-2.6-omap/arch/arm/kernel/etm.c:595: undefined reference to `amba_release_regions' arch/arm/kernel/built-in.o: In function `etb_probe': /home/tom/git/omap/linux-2.6-omap/arch/arm/kernel/etm.c:347: undefined reference to `amba_request_regions' /home/tom/git/omap/linux-2.6-omap/arch/arm/kernel/etm.c:392: undefined reference to `amba_release_regions' arch/arm/mach-omap2/built-in.o: In function `emu_init': /home/tom/git/omap/linux-2.6-omap/arch/arm/mach-omap2/emu.c:62: undefined reference to `amba_device_register' /home/tom/git/omap/linux-2.6-omap/arch/arm/mach-omap2/emu.c:63: undefined reference to `amba_device_register' make: *** [.tmp_vmlinux1] Error 1 making modules Signed-off-by: Ming Lei Cc: stable@vger.kernel.org Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/Kconfig | 1 + 1 file changed, 1 insertion(+) (limited to 'arch') diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig index 503414718905..e1293aa513d3 100644 --- a/arch/arm/mach-omap2/Kconfig +++ b/arch/arm/mach-omap2/Kconfig @@ -334,6 +334,7 @@ config MACH_OMAP4_PANDA config OMAP3_EMU bool "OMAP3 debugging peripherals" depends on ARCH_OMAP3 + select ARM_AMBA select OC_ETM help Say Y here to enable debugging hardware of omap3 -- cgit v1.2.1 From 52a2396249478018ea2e83d962a347d38d8cccbe Mon Sep 17 00:00:00 2001 From: Thomas Weber Date: Wed, 23 Nov 2011 14:45:22 -0800 Subject: ARM: OMAP2+: Remove empty io.h The file arch/arm/mach-omap2/io.h is empty, so we can remove it. Signed-off-by: Thomas Weber Acked-by: Kevin Hilman Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/io.h | 0 1 file changed, 0 insertions(+), 0 deletions(-) delete mode 100644 arch/arm/mach-omap2/io.h (limited to 'arch') diff --git a/arch/arm/mach-omap2/io.h b/arch/arm/mach-omap2/io.h deleted file mode 100644 index e69de29bb2d1..000000000000 -- cgit v1.2.1 From 8770b07c2dff3cec2c751b289ee690137c88ea54 Mon Sep 17 00:00:00 2001 From: "Govindraj.R" Date: Wed, 23 Nov 2011 14:45:37 -0800 Subject: ARM: OMAP2+: Fix Compilation error when omap_l3_noc built as module Fix below compilation failure on mainline kernel 3.2-rc1 when omap_l3_noc.c is built as module. arch/arm/mach-omap2/omap_l3_noc.c:240: error: expected ',' or ';' before 'MODULE_DEVICE_TABLE' Signed-off-by: Govindraj.R Acked-by: Santosh Shilimkar Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/omap_l3_noc.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/mach-omap2/omap_l3_noc.c b/arch/arm/mach-omap2/omap_l3_noc.c index 6a66aa5e2a5b..d15225ff5c49 100644 --- a/arch/arm/mach-omap2/omap_l3_noc.c +++ b/arch/arm/mach-omap2/omap_l3_noc.c @@ -237,7 +237,7 @@ static int __devexit omap4_l3_remove(struct platform_device *pdev) static const struct of_device_id l3_noc_match[] = { {.compatible = "ti,omap4-l3-noc", }, {}, -} +}; MODULE_DEVICE_TABLE(of, l3_noc_match); #else #define l3_noc_match NULL -- cgit v1.2.1 From c3c3ced77fd1949af753be7731bfdadae88a226b Mon Sep 17 00:00:00 2001 From: Roy Zang Date: Mon, 7 Nov 2011 16:32:58 +0800 Subject: powerpc/p1023: set IRQ[4:6,11] to active-high level sensitive for PCIe P1023 external IRQ[4:6, 11] are not pin out, but the interrupts are utilized by the PCIe controllers. As they are not exposed as pins we need to set them as active-high (internal to the SoC these interrupts are pulled down). IRQs[0:3,7:10] are pulled up on the board so we have them set as active-low. Signed-off-by: Roy Zang Signed-off-by: Kumar Gala --- arch/powerpc/boot/dts/p1023rds.dts | 17 +++++++++++++---- 1 file changed, 13 insertions(+), 4 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/boot/dts/p1023rds.dts b/arch/powerpc/boot/dts/p1023rds.dts index d9b776740a67..d3b478242ea9 100644 --- a/arch/powerpc/boot/dts/p1023rds.dts +++ b/arch/powerpc/boot/dts/p1023rds.dts @@ -449,6 +449,7 @@ interrupt-parent = <&mpic>; interrupts = <16 2>; interrupt-map-mask = <0xf800 0 0 7>; + /* IRQ[0:3] are pulled up on board, set to active-low */ interrupt-map = < /* IDSEL 0x0 */ 0000 0 0 1 &mpic 0 1 @@ -488,11 +489,15 @@ interrupt-parent = <&mpic>; interrupts = <16 2>; interrupt-map-mask = <0xf800 0 0 7>; + /* + * IRQ[4:6] only for PCIe, set to active-high, + * IRQ[7] is pulled up on board, set to active-low + */ interrupt-map = < /* IDSEL 0x0 */ - 0000 0 0 1 &mpic 4 1 - 0000 0 0 2 &mpic 5 1 - 0000 0 0 3 &mpic 6 1 + 0000 0 0 1 &mpic 4 2 + 0000 0 0 2 &mpic 5 2 + 0000 0 0 3 &mpic 6 2 0000 0 0 4 &mpic 7 1 >; ranges = <0x2000000 0x0 0xa0000000 @@ -527,12 +532,16 @@ interrupt-parent = <&mpic>; interrupts = <16 2>; interrupt-map-mask = <0xf800 0 0 7>; + /* + * IRQ[8:10] are pulled up on board, set to active-low + * IRQ[11] only for PCIe, set to active-high, + */ interrupt-map = < /* IDSEL 0x0 */ 0000 0 0 1 &mpic 8 1 0000 0 0 2 &mpic 9 1 0000 0 0 3 &mpic 10 1 - 0000 0 0 4 &mpic 11 1 + 0000 0 0 4 &mpic 11 2 >; ranges = <0x2000000 0x0 0x80000000 0x2000000 0x0 0x80000000 -- cgit v1.2.1 From a92282524aee149de0014eef10a0771d1d19821f Mon Sep 17 00:00:00 2001 From: Paul Bolle Date: Sun, 13 Nov 2011 00:50:30 +0100 Subject: powerpc/p3060qds: Fix select of 'MPC8xxx_GPIO' The driver for the Freescale P3060 QDS got added by commit 96cc017c5b ("[...] Add support for P3060QDS board"). Its Kconfig entry selects MPC8xxx_GPIO. But at the time that driver got added MPC8xxx_GPIO was already renamed to GPIO_MPC8XXX, by commit c68308dd50c ("gpio: move mpc8xxx/512x gpio driver to drivers/gpio"). So make this driver select GPIO_MPC8XXX. Signed-off-by: Paul Bolle Acked-by: Wolfram Sang Signed-off-by: Kumar Gala --- arch/powerpc/platforms/85xx/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/powerpc/platforms/85xx/Kconfig b/arch/powerpc/platforms/85xx/Kconfig index 45023e26aea3..d7946be298b6 100644 --- a/arch/powerpc/platforms/85xx/Kconfig +++ b/arch/powerpc/platforms/85xx/Kconfig @@ -203,7 +203,7 @@ config P3060_QDS select PPC_E500MC select PHYS_64BIT select SWIOTLB - select MPC8xxx_GPIO + select GPIO_MPC8XXX select HAS_RAPIDIO select PPC_EPAPR_HV_PIC help -- cgit v1.2.1 From 05011f370a4f549da69f3841e319043728f65542 Mon Sep 17 00:00:00 2001 From: Kumar Gala Date: Sun, 20 Nov 2011 09:58:11 -0600 Subject: powerpc/85xx: Fix compile error on p3060_qds.c arch/powerpc/platforms/85xx/p3060_qds.c: In function '__machine_initcall_p3060_qds_declare_of_platform_devices': arch/powerpc/platforms/85xx/p3060_qds.c:73:1: error: implicit declaration of function 'declare_of_platform_devices' declare_of_platform_devices should have been corenet_ds_publish_devices. Signed-off-by: Kumar Gala --- arch/powerpc/platforms/85xx/p3060_qds.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/powerpc/platforms/85xx/p3060_qds.c b/arch/powerpc/platforms/85xx/p3060_qds.c index 01dcf44871e9..081cf4ac1881 100644 --- a/arch/powerpc/platforms/85xx/p3060_qds.c +++ b/arch/powerpc/platforms/85xx/p3060_qds.c @@ -70,7 +70,7 @@ define_machine(p3060_qds) { .power_save = e500_idle, }; -machine_device_initcall(p3060_qds, declare_of_platform_devices); +machine_device_initcall(p3060_qds, corenet_ds_publish_devices); #ifdef CONFIG_SWIOTLB machine_arch_initcall(p3060_qds, swiotlb_setup_bus_notifier); -- cgit v1.2.1 From ae5f8c19827493e5a8d48c2c6a8a92201a94f08b Mon Sep 17 00:00:00 2001 From: Joakim Tjernlund Date: Tue, 23 Aug 2011 14:30:05 +0200 Subject: powerpc/qe: Fixup QE_General4 errata QE_General4 should only round up the divisor iff divisor is > 3. Rounding up lower divisors makes the error too big, causing USB on MPC832x to fail. Signed-off-by: Joakim Tjernlund Acked-by: Timur Tabi Signed-off-by: Kumar Gala --- arch/powerpc/sysdev/qe_lib/qe.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/powerpc/sysdev/qe_lib/qe.c b/arch/powerpc/sysdev/qe_lib/qe.c index 3363fbc964f8..ceb09cbd2329 100644 --- a/arch/powerpc/sysdev/qe_lib/qe.c +++ b/arch/powerpc/sysdev/qe_lib/qe.c @@ -216,7 +216,7 @@ int qe_setbrg(enum qe_clock brg, unsigned int rate, unsigned int multiplier) /* Errata QE_General4, which affects some MPC832x and MPC836x SOCs, says that the BRG divisor must be even if you're not using divide-by-16 mode. */ - if (!div16 && (divisor & 1)) + if (!div16 && (divisor & 1) && (divisor > 3)) divisor++; tempval = ((divisor - 1) << QE_BRGC_DIVISOR_SHIFT) | -- cgit v1.2.1 From 7145cf12095265b8a292835d0f6da87f89fac1d1 Mon Sep 17 00:00:00 2001 From: Alexandre Rusev Date: Thu, 27 Oct 2011 18:18:37 +0400 Subject: powerpc/fsl-lbc: Fix for fsl_upm If Freescale LBC driver fails to initialise itself from device tree, then internal structure is freed only but not NULL-fied. As result functions fsl_lbc_find() after checking the structure is not NULL are trying to access device registers. Signed-off-by: Alexandre Rusev Signed-off-by: Kumar Gala --- arch/powerpc/sysdev/fsl_lbc.c | 1 + 1 file changed, 1 insertion(+) (limited to 'arch') diff --git a/arch/powerpc/sysdev/fsl_lbc.c b/arch/powerpc/sysdev/fsl_lbc.c index c4d96fa32ba5..d5c3c90ee698 100644 --- a/arch/powerpc/sysdev/fsl_lbc.c +++ b/arch/powerpc/sysdev/fsl_lbc.c @@ -328,6 +328,7 @@ static int __devinit fsl_lbc_ctrl_probe(struct platform_device *dev) err: iounmap(fsl_lbc_ctrl_dev->regs); kfree(fsl_lbc_ctrl_dev); + fsl_lbc_ctrl_dev = NULL; return ret; } -- cgit v1.2.1 From e3854b6e25d1b092c30c5f81a04fe6fc839b1e26 Mon Sep 17 00:00:00 2001 From: Julia Lawall Date: Mon, 8 Aug 2011 13:18:02 +0200 Subject: arch/powerpc/sysdev/ehv_pic.c: add missing kfree At this point, ehv_pic has been allocated but not stored anywhere, so it should be freed before leaving the function. A simplified version of the semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // @exists@ local idexpression x; statement S,S1; expression E; identifier fl; expression *ptr != NULL; @@ x = \(kmalloc\|kzalloc\|kcalloc\)(...); ... if (x == NULL) S <... when != x when != if (...) { <+...kfree(x)...+> } when any when != true x == NULL x->fl ...> ( if (x == NULL) S1 | if (...) { ... when != x when forall ( return \(0\|<+...x...+>\|ptr\); | * return ...; ) } ) // Signed-off-by: Julia Lawall Acked-by: Timur Tabi Signed-off-by: Kumar Gala --- arch/powerpc/sysdev/ehv_pic.c | 1 + 1 file changed, 1 insertion(+) (limited to 'arch') diff --git a/arch/powerpc/sysdev/ehv_pic.c b/arch/powerpc/sysdev/ehv_pic.c index af1a5df46b3e..b6731e4a6646 100644 --- a/arch/powerpc/sysdev/ehv_pic.c +++ b/arch/powerpc/sysdev/ehv_pic.c @@ -280,6 +280,7 @@ void __init ehv_pic_init(void) if (!ehv_pic->irqhost) { of_node_put(np); + kfree(ehv_pic); return; } -- cgit v1.2.1 From 1b6cec8a6910ca08d727898453baad22b0122920 Mon Sep 17 00:00:00 2001 From: Magnus Damm Date: Tue, 22 Nov 2011 15:15:57 +0900 Subject: ARM: mach-shmobile: Kota2 PINT fix Support PINT on sh73a0 and Kota2 using INTC PINT macros. With this patch applied the Kota2 ethernet is handled through one of the chained sh73a0 PINT interrupt controllers. sh73a0 PINT support is included in 3.2-rc but the Kota2 board code does not make use of this shared code base without this patch. Without this patch kota2 on-board ethernet is broken. Signed-off-by: Magnus Damm Signed-off-by: Paul Mundt --- arch/arm/mach-shmobile/board-kota2.c | 16 ++-------------- 1 file changed, 2 insertions(+), 14 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-shmobile/board-kota2.c b/arch/arm/mach-shmobile/board-kota2.c index bd9a78424d6b..5e084b9a8404 100644 --- a/arch/arm/mach-shmobile/board-kota2.c +++ b/arch/arm/mach-shmobile/board-kota2.c @@ -56,7 +56,7 @@ static struct resource smsc9220_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = gic_spi(33), /* PINTA2 @ PORT144 */ + .start = SH73A0_PINT0_IRQ(2), /* PINTA2 */ .flags = IORESOURCE_IRQ, }, }; @@ -317,18 +317,6 @@ static void __init kota2_map_io(void) shmobile_setup_console(); } -#define PINTER0A 0xe69000a0 -#define PINTCR0A 0xe69000b0 - -void __init kota2_init_irq(void) -{ - sh73a0_init_irq(); - - /* setup PINT: enable PINTA2 as active low */ - __raw_writel(1 << 29, PINTER0A); - __raw_writew(2 << 10, PINTCR0A); -} - static void __init kota2_init(void) { sh73a0_pinmux_init(); @@ -447,7 +435,7 @@ struct sys_timer kota2_timer = { MACHINE_START(KOTA2, "kota2") .map_io = kota2_map_io, - .init_irq = kota2_init_irq, + .init_irq = sh73a0_init_irq, .handle_irq = shmobile_handle_irq_gic, .init_machine = kota2_init, .timer = &kota2_timer, -- cgit v1.2.1 From dcb4ea869877b00fd1c761662bfd9359d15a8c2a Mon Sep 17 00:00:00 2001 From: Magnus Damm Date: Tue, 22 Nov 2011 15:29:54 +0900 Subject: ARM: mach-shmobile: Kota2 GIC Sparse IRQ fix Fix IRQ support on the Kota2 board. The sh73a0 and the Kota2 board make use of the ARM GIC hardware block as main interrupt controller. The following commit changed the default behaviour for non-device tree platforms and broke Kota2 irq support: f37a53c ARM: gic: fix irq_alloc_descs handling for sparse irq Without this fix the following warning triggers at boot: NR_IRQS:1024 nr_irqs:1024 1024 ------------[ cut here ]------------ WARNING: at arch/arm/common/gic.c:607 gic_init+0x90/0x2e4() Cannot allocate irq_descs @ IRQ16, assuming pre-allocated [] (unwind_backtrace+0x0/0xe0) from [] (warn_slowpath_commo) [] (warn_slowpath_common+0x48/0x60) from [] (warn_slowpath_) [] (warn_slowpath_fmt+0x2c/0x3c) from [] (gic_init+0x90/0x2) [] (gic_init+0x90/0x2e4) from [] (sh73a0_init_irq+0x30/0x18) [] (sh73a0_init_irq+0x30/0x184) from [] (init_IRQ+0x14/0x1c) [] (init_IRQ+0x14/0x1c) from [] (start_kernel+0x15c/0x2b8) [] (start_kernel+0x15c/0x2b8) from [<4000803c>] (0x4000803c) ---[ end trace 1b75b31a2719ed1c ]--- With this fix applied interrupts work as expected. Signed-off-by: Magnus Damm Acked-by: Rob Herring Signed-off-by: Paul Mundt --- arch/arm/mach-shmobile/board-kota2.c | 1 + 1 file changed, 1 insertion(+) (limited to 'arch') diff --git a/arch/arm/mach-shmobile/board-kota2.c b/arch/arm/mach-shmobile/board-kota2.c index 5e084b9a8404..53e5e45521aa 100644 --- a/arch/arm/mach-shmobile/board-kota2.c +++ b/arch/arm/mach-shmobile/board-kota2.c @@ -435,6 +435,7 @@ struct sys_timer kota2_timer = { MACHINE_START(KOTA2, "kota2") .map_io = kota2_map_io, + .nr_irqs = NR_IRQS_LEGACY, .init_irq = sh73a0_init_irq, .handle_irq = shmobile_handle_irq_gic, .init_machine = kota2_init, -- cgit v1.2.1 From 33661c9e2062865acde9d421c971f1c142cf99ca Mon Sep 17 00:00:00 2001 From: Magnus Damm Date: Tue, 22 Nov 2011 15:44:58 +0900 Subject: ARM: mach-shmobile: Kota2 TPU LED platform data This patch updates the Kota2 board support code to use the recently merged TPU LED driver whenever possible. The sh73a0 SoC has 5 TPU hardware blocks each with 4 timer channels which in theory allows a total of 20 LEDs to be controlled by "leds-renesas-tpu" driver instances. The Kota2 board has 4 LEDs connected to GPIO pins that also come with TPU pin functions, so this patch ties up these 4 LEDS and leaves the remaining 3 LEDS for the GPIO based LED driver. Signed-off-by: Magnus Damm Signed-off-by: Paul Mundt --- arch/arm/mach-shmobile/board-kota2.c | 122 ++++++++++++++++++++++++++++++++-- arch/arm/mach-shmobile/clock-sh73a0.c | 16 +++++ 2 files changed, 134 insertions(+), 4 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-shmobile/board-kota2.c b/arch/arm/mach-shmobile/board-kota2.c index 53e5e45521aa..f44150b5ae46 100644 --- a/arch/arm/mach-shmobile/board-kota2.c +++ b/arch/arm/mach-shmobile/board-kota2.c @@ -33,6 +33,7 @@ #include #include #include +#include #include #include #include @@ -157,10 +158,6 @@ static struct platform_device gpio_keys_device = { #define GPIO_LED(n, g) { .name = n, .gpio = g } static struct gpio_led gpio_leds[] = { - GPIO_LED("V2513", GPIO_PORT153), /* PORT153 [TPU1T02] -> V2513 */ - GPIO_LED("V2514", GPIO_PORT199), /* PORT199 [TPU4TO1] -> V2514 */ - GPIO_LED("V2515", GPIO_PORT197), /* PORT197 [TPU2TO1] -> V2515 */ - GPIO_LED("KEYLED", GPIO_PORT163), /* PORT163 [TPU3TO0] -> KEYLED */ GPIO_LED("G", GPIO_PORT20), /* PORT20 [GPO0] -> LED7 -> "G" */ GPIO_LED("H", GPIO_PORT21), /* PORT21 [GPO1] -> LED8 -> "H" */ GPIO_LED("J", GPIO_PORT22), /* PORT22 [GPO2] -> LED9 -> "J" */ @@ -179,6 +176,119 @@ static struct platform_device gpio_leds_device = { }, }; +/* TPU LED */ +static struct led_renesas_tpu_config led_renesas_tpu12_pdata = { + .name = "V2513", + .pin_gpio_fn = GPIO_FN_TPU1TO2, + .pin_gpio = GPIO_PORT153, + .channel_offset = 0x90, + .timer_bit = 2, + .max_brightness = 1000, +}; + +static struct resource tpu12_resources[] = { + [0] = { + .name = "TPU12", + .start = 0xe6610090, + .end = 0xe66100b5, + .flags = IORESOURCE_MEM, + }, +}; + +static struct platform_device leds_tpu12_device = { + .name = "leds-renesas-tpu", + .id = 12, + .dev = { + .platform_data = &led_renesas_tpu12_pdata, + }, + .num_resources = ARRAY_SIZE(tpu12_resources), + .resource = tpu12_resources, +}; + +static struct led_renesas_tpu_config led_renesas_tpu41_pdata = { + .name = "V2514", + .pin_gpio_fn = GPIO_FN_TPU4TO1, + .pin_gpio = GPIO_PORT199, + .channel_offset = 0x50, + .timer_bit = 1, + .max_brightness = 1000, +}; + +static struct resource tpu41_resources[] = { + [0] = { + .name = "TPU41", + .start = 0xe6640050, + .end = 0xe6640075, + .flags = IORESOURCE_MEM, + }, +}; + +static struct platform_device leds_tpu41_device = { + .name = "leds-renesas-tpu", + .id = 41, + .dev = { + .platform_data = &led_renesas_tpu41_pdata, + }, + .num_resources = ARRAY_SIZE(tpu41_resources), + .resource = tpu41_resources, +}; + +static struct led_renesas_tpu_config led_renesas_tpu21_pdata = { + .name = "V2515", + .pin_gpio_fn = GPIO_FN_TPU2TO1, + .pin_gpio = GPIO_PORT197, + .channel_offset = 0x50, + .timer_bit = 1, + .max_brightness = 1000, +}; + +static struct resource tpu21_resources[] = { + [0] = { + .name = "TPU21", + .start = 0xe6620050, + .end = 0xe6620075, + .flags = IORESOURCE_MEM, + }, +}; + +static struct platform_device leds_tpu21_device = { + .name = "leds-renesas-tpu", + .id = 21, + .dev = { + .platform_data = &led_renesas_tpu21_pdata, + }, + .num_resources = ARRAY_SIZE(tpu21_resources), + .resource = tpu21_resources, +}; + +static struct led_renesas_tpu_config led_renesas_tpu30_pdata = { + .name = "KEYLED", + .pin_gpio_fn = GPIO_FN_TPU3TO0, + .pin_gpio = GPIO_PORT163, + .channel_offset = 0x10, + .timer_bit = 0, + .max_brightness = 1000, +}; + +static struct resource tpu30_resources[] = { + [0] = { + .name = "TPU30", + .start = 0xe6630010, + .end = 0xe6630035, + .flags = IORESOURCE_MEM, + }, +}; + +static struct platform_device leds_tpu30_device = { + .name = "leds-renesas-tpu", + .id = 30, + .dev = { + .platform_data = &led_renesas_tpu30_pdata, + }, + .num_resources = ARRAY_SIZE(tpu30_resources), + .resource = tpu30_resources, +}; + /* MMCIF */ static struct resource mmcif_resources[] = { [0] = { @@ -291,6 +401,10 @@ static struct platform_device *kota2_devices[] __initdata = { &keysc_device, &gpio_keys_device, &gpio_leds_device, + &leds_tpu12_device, + &leds_tpu41_device, + &leds_tpu21_device, + &leds_tpu30_device, &mmcif_device, &sdhi0_device, &sdhi1_device, diff --git a/arch/arm/mach-shmobile/clock-sh73a0.c b/arch/arm/mach-shmobile/clock-sh73a0.c index 61a846bb30f2..a56d6c63b71e 100644 --- a/arch/arm/mach-shmobile/clock-sh73a0.c +++ b/arch/arm/mach-shmobile/clock-sh73a0.c @@ -113,6 +113,12 @@ static struct clk main_clk = { .ops = &main_clk_ops, }; +/* Divide Main clock by two */ +static struct clk main_div2_clk = { + .ops = &div2_clk_ops, + .parent = &main_clk, +}; + /* PLL0, PLL1, PLL2, PLL3 */ static unsigned long pll_recalc(struct clk *clk) { @@ -181,6 +187,7 @@ static struct clk *main_clks[] = { &extal1_div2_clk, &extal2_div2_clk, &main_clk, + &main_div2_clk, &pll0_clk, &pll1_clk, &pll2_clk, @@ -268,6 +275,7 @@ enum { MSTP001, MSTP207, MSTP206, MSTP204, MSTP203, MSTP202, MSTP201, MSTP200, MSTP331, MSTP329, MSTP325, MSTP323, MSTP318, MSTP314, MSTP313, MSTP312, MSTP311, + MSTP303, MSTP302, MSTP301, MSTP300, MSTP411, MSTP410, MSTP403, MSTP_NR }; @@ -301,6 +309,10 @@ static struct clk mstp_clks[MSTP_NR] = { [MSTP313] = MSTP(&div6_clks[DIV6_SDHI1], SMSTPCR3, 13, 0), /* SDHI1 */ [MSTP312] = MSTP(&div4_clks[DIV4_HP], SMSTPCR3, 12, 0), /* MMCIF0 */ [MSTP311] = MSTP(&div6_clks[DIV6_SDHI2], SMSTPCR3, 11, 0), /* SDHI2 */ + [MSTP303] = MSTP(&main_div2_clk, SMSTPCR3, 3, 0), /* TPU1 */ + [MSTP302] = MSTP(&main_div2_clk, SMSTPCR3, 2, 0), /* TPU2 */ + [MSTP301] = MSTP(&main_div2_clk, SMSTPCR3, 1, 0), /* TPU3 */ + [MSTP300] = MSTP(&main_div2_clk, SMSTPCR3, 0, 0), /* TPU4 */ [MSTP411] = MSTP(&div4_clks[DIV4_HP], SMSTPCR4, 11, 0), /* IIC3 */ [MSTP410] = MSTP(&div4_clks[DIV4_HP], SMSTPCR4, 10, 0), /* IIC4 */ [MSTP403] = MSTP(&r_clk, SMSTPCR4, 3, 0), /* KEYSC */ @@ -350,6 +362,10 @@ static struct clk_lookup lookups[] = { CLKDEV_DEV_ID("sh_mobile_sdhi.1", &mstp_clks[MSTP313]), /* SDHI1 */ CLKDEV_DEV_ID("sh_mmcif.0", &mstp_clks[MSTP312]), /* MMCIF0 */ CLKDEV_DEV_ID("sh_mobile_sdhi.2", &mstp_clks[MSTP311]), /* SDHI2 */ + CLKDEV_DEV_ID("leds-renesas-tpu.12", &mstp_clks[MSTP303]), /* TPU1 */ + CLKDEV_DEV_ID("leds-renesas-tpu.21", &mstp_clks[MSTP302]), /* TPU2 */ + CLKDEV_DEV_ID("leds-renesas-tpu.30", &mstp_clks[MSTP301]), /* TPU3 */ + CLKDEV_DEV_ID("leds-renesas-tpu.41", &mstp_clks[MSTP300]), /* TPU4 */ CLKDEV_DEV_ID("i2c-sh_mobile.3", &mstp_clks[MSTP411]), /* I2C3 */ CLKDEV_DEV_ID("i2c-sh_mobile.4", &mstp_clks[MSTP410]), /* I2C4 */ CLKDEV_DEV_ID("sh_keysc.0", &mstp_clks[MSTP403]), /* KEYSC */ -- cgit v1.2.1 From eded9143151a116753b1d8e893bc2d37f8687e0b Mon Sep 17 00:00:00 2001 From: Magnus Damm Date: Tue, 22 Nov 2011 15:31:40 +0900 Subject: ARM: mach-shmobile: AG5EVM GIC Sparse IRQ fix Fix IRQ support on the AG5EVM board. The sh73a0 and the AG5EVM board make use of the ARM GIC hardware block as main interrupt controller. The following commit changed the default behaviour for non-device tree platforms and broke AG5EVM irq support: f37a53c ARM: gic: fix irq_alloc_descs handling for sparse irq Without this fix the following warning triggers at boot: NR_IRQS:1024 nr_irqs:1024 1024 ------------[ cut here ]------------ WARNING: at arch/arm/common/gic.c:607 gic_init+0x90/0x2e4() Cannot allocate irq_descs @ IRQ16, assuming pre-allocated [] (unwind_backtrace+0x0/0xe0) from [] (warn_slowpath_commo) [] (warn_slowpath_common+0x48/0x60) from [] (warn_slowpath_) [] (warn_slowpath_fmt+0x2c/0x3c) from [] (gic_init+0x90/0x2) [] (gic_init+0x90/0x2e4) from [] (sh73a0_init_irq+0x30/0x18) [] (sh73a0_init_irq+0x30/0x184) from [] (init_IRQ+0x14/0x1c) [] (init_IRQ+0x14/0x1c) from [] (start_kernel+0x15c/0x2b8) [] (start_kernel+0x15c/0x2b8) from [<4000803c>] (0x4000803c) ---[ end trace 1b75b31a2719ed1c ]--- With this fix applied interrupts work as expected. Signed-off-by: Magnus Damm Acked-by: Rob Herring Signed-off-by: Paul Mundt --- arch/arm/mach-shmobile/board-ag5evm.c | 1 + 1 file changed, 1 insertion(+) (limited to 'arch') diff --git a/arch/arm/mach-shmobile/board-ag5evm.c b/arch/arm/mach-shmobile/board-ag5evm.c index b862e9f81e3e..7119b87cbfa0 100644 --- a/arch/arm/mach-shmobile/board-ag5evm.c +++ b/arch/arm/mach-shmobile/board-ag5evm.c @@ -607,6 +607,7 @@ struct sys_timer ag5evm_timer = { MACHINE_START(AG5EVM, "ag5evm") .map_io = ag5evm_map_io, + .nr_irqs = NR_IRQS_LEGACY, .init_irq = sh73a0_init_irq, .handle_irq = shmobile_handle_irq_gic, .init_machine = ag5evm_init, -- cgit v1.2.1 From 9bcc0a5d0de137b3a154dc951c5ff70dce815879 Mon Sep 17 00:00:00 2001 From: Magnus Damm Date: Tue, 22 Nov 2011 15:23:17 +0900 Subject: ARM: mach-shmobile: SH73A0 external Ethernet fix Keep the ZB clock enabled on sh73a0 to allow the BSC to access external peripherals hooked up to CS signals. This is needed to unbreak Ethernet support on sh73a0 boards such as AG5EVM and Kota2 together with the following patch: 794d78f drivers: sh: late disabling of clocks V2 Signed-off-by: Magnus Damm Signed-off-by: Paul Mundt --- arch/arm/mach-shmobile/clock-sh73a0.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/mach-shmobile/clock-sh73a0.c b/arch/arm/mach-shmobile/clock-sh73a0.c index 61a846bb30f2..84fd33c9f4ee 100644 --- a/arch/arm/mach-shmobile/clock-sh73a0.c +++ b/arch/arm/mach-shmobile/clock-sh73a0.c @@ -243,7 +243,7 @@ static struct clk div6_clks[DIV6_NR] = { [DIV6_VCK1] = SH_CLK_DIV6(&pll1_div2_clk, VCLKCR1, 0), [DIV6_VCK2] = SH_CLK_DIV6(&pll1_div2_clk, VCLKCR2, 0), [DIV6_VCK3] = SH_CLK_DIV6(&pll1_div2_clk, VCLKCR3, 0), - [DIV6_ZB1] = SH_CLK_DIV6(&pll1_div2_clk, ZBCKCR, 0), + [DIV6_ZB1] = SH_CLK_DIV6(&pll1_div2_clk, ZBCKCR, CLK_ENABLE_ON_INIT), [DIV6_FLCTL] = SH_CLK_DIV6(&pll1_div2_clk, FLCKCR, 0), [DIV6_SDHI0] = SH_CLK_DIV6(&pll1_div2_clk, SD0CKCR, 0), [DIV6_SDHI1] = SH_CLK_DIV6(&pll1_div2_clk, SD1CKCR, 0), -- cgit v1.2.1 From 85d096db6764fd89cea232cf64b65a5f3b0f1ffc Mon Sep 17 00:00:00 2001 From: Jean-Christophe PLAGNIOL-VILLARD Date: Sun, 16 Oct 2011 00:07:20 +0800 Subject: ARM: at91: rename defconfig files appropriately rename all Atmel reference board as soc defconfig Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD Cc: Nicolas Ferre Signed-off-by: Arnd Bergmann --- arch/arm/configs/at91cap9_defconfig | 115 +++++++++++++++++++++++++++++ arch/arm/configs/at91cap9adk_defconfig | 115 ----------------------------- arch/arm/configs/at91sam9260_defconfig | 83 +++++++++++++++++++++ arch/arm/configs/at91sam9260ek_defconfig | 83 --------------------- arch/arm/configs/at91sam9g20_defconfig | 123 +++++++++++++++++++++++++++++++ arch/arm/configs/at91sam9g20ek_defconfig | 123 ------------------------------- arch/arm/configs/at91sam9rl_defconfig | 84 +++++++++++++++++++++ arch/arm/configs/at91sam9rlek_defconfig | 84 --------------------- 8 files changed, 405 insertions(+), 405 deletions(-) create mode 100644 arch/arm/configs/at91cap9_defconfig delete mode 100644 arch/arm/configs/at91cap9adk_defconfig create mode 100644 arch/arm/configs/at91sam9260_defconfig delete mode 100644 arch/arm/configs/at91sam9260ek_defconfig create mode 100644 arch/arm/configs/at91sam9g20_defconfig delete mode 100644 arch/arm/configs/at91sam9g20ek_defconfig create mode 100644 arch/arm/configs/at91sam9rl_defconfig delete mode 100644 arch/arm/configs/at91sam9rlek_defconfig (limited to 'arch') diff --git a/arch/arm/configs/at91cap9_defconfig b/arch/arm/configs/at91cap9_defconfig new file mode 100644 index 000000000000..ffb1edd93363 --- /dev/null +++ b/arch/arm/configs/at91cap9_defconfig @@ -0,0 +1,115 @@ +CONFIG_EXPERIMENTAL=y +# CONFIG_LOCALVERSION_AUTO is not set +# CONFIG_SWAP is not set +CONFIG_SYSVIPC=y +CONFIG_LOG_BUF_SHIFT=14 +CONFIG_BLK_DEV_INITRD=y +CONFIG_SLAB=y +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +# CONFIG_BLK_DEV_BSG is not set +# CONFIG_IOSCHED_DEADLINE is not set +# CONFIG_IOSCHED_CFQ is not set +CONFIG_ARCH_AT91=y +CONFIG_ARCH_AT91CAP9=y +CONFIG_MACH_AT91CAP9ADK=y +CONFIG_MTD_AT91_DATAFLASH_CARD=y +CONFIG_AT91_PROGRAMMABLE_CLOCKS=y +# CONFIG_ARM_THUMB is not set +CONFIG_AEABI=y +CONFIG_LEDS=y +CONFIG_LEDS_CPU=y +CONFIG_ZBOOT_ROM_TEXT=0x0 +CONFIG_ZBOOT_ROM_BSS=0x0 +CONFIG_CMDLINE="console=ttyS0,115200 root=/dev/ram0 rw" +CONFIG_FPE_NWFPE=y +CONFIG_NET=y +CONFIG_PACKET=y +CONFIG_UNIX=y +CONFIG_INET=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_BOOTP=y +CONFIG_IP_PNP_RARP=y +# CONFIG_INET_XFRM_MODE_TRANSPORT is not set +# CONFIG_INET_XFRM_MODE_TUNNEL is not set +# CONFIG_INET_XFRM_MODE_BEET is not set +# CONFIG_INET_LRO is not set +# CONFIG_INET_DIAG is not set +# CONFIG_IPV6 is not set +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_MTD=y +CONFIG_MTD_PARTITIONS=y +CONFIG_MTD_CMDLINE_PARTS=y +CONFIG_MTD_CHAR=y +CONFIG_MTD_BLOCK=y +CONFIG_MTD_CFI=y +CONFIG_MTD_JEDECPROBE=y +CONFIG_MTD_CFI_AMDSTD=y +CONFIG_MTD_PHYSMAP=y +CONFIG_MTD_DATAFLASH=y +CONFIG_MTD_NAND=y +CONFIG_MTD_NAND_ATMEL=y +CONFIG_BLK_DEV_LOOP=y +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_SIZE=8192 +CONFIG_ATMEL_SSC=y +CONFIG_SCSI=y +CONFIG_BLK_DEV_SD=y +CONFIG_SCSI_MULTI_LUN=y +CONFIG_NETDEVICES=y +CONFIG_NET_ETHERNET=y +CONFIG_MII=y +CONFIG_MACB=y +# CONFIG_NETDEV_1000 is not set +# CONFIG_NETDEV_10000 is not set +# CONFIG_INPUT_MOUSEDEV_PSAUX is not set +CONFIG_INPUT_EVDEV=y +# CONFIG_INPUT_KEYBOARD is not set +# CONFIG_INPUT_MOUSE is not set +CONFIG_INPUT_TOUCHSCREEN=y +CONFIG_TOUCHSCREEN_ADS7846=y +# CONFIG_SERIO is not set +CONFIG_SERIAL_ATMEL=y +CONFIG_SERIAL_ATMEL_CONSOLE=y +CONFIG_HW_RANDOM=y +CONFIG_I2C=y +CONFIG_I2C_CHARDEV=y +CONFIG_SPI=y +CONFIG_SPI_ATMEL=y +# CONFIG_HWMON is not set +CONFIG_WATCHDOG=y +CONFIG_WATCHDOG_NOWAYOUT=y +CONFIG_FB=y +CONFIG_FB_ATMEL=y +# CONFIG_VGA_CONSOLE is not set +CONFIG_LOGO=y +# CONFIG_LOGO_LINUX_MONO is not set +# CONFIG_LOGO_LINUX_CLUT224 is not set +# CONFIG_USB_HID is not set +CONFIG_USB=y +CONFIG_USB_DEVICEFS=y +CONFIG_USB_MON=y +CONFIG_USB_OHCI_HCD=y +CONFIG_USB_STORAGE=y +CONFIG_USB_GADGET=y +CONFIG_USB_ETH=m +CONFIG_USB_FILE_STORAGE=m +CONFIG_MMC=y +CONFIG_MMC_AT91=m +CONFIG_RTC_CLASS=y +CONFIG_RTC_DRV_AT91SAM9=y +CONFIG_EXT2_FS=y +CONFIG_INOTIFY=y +CONFIG_VFAT_FS=y +CONFIG_TMPFS=y +CONFIG_JFFS2_FS=y +CONFIG_CRAMFS=y +CONFIG_NFS_FS=y +CONFIG_ROOT_NFS=y +CONFIG_NLS_CODEPAGE_437=y +CONFIG_NLS_CODEPAGE_850=y +CONFIG_NLS_ISO8859_1=y +CONFIG_DEBUG_FS=y +CONFIG_DEBUG_KERNEL=y +CONFIG_DEBUG_INFO=y +CONFIG_DEBUG_USER=y diff --git a/arch/arm/configs/at91cap9adk_defconfig b/arch/arm/configs/at91cap9adk_defconfig deleted file mode 100644 index ffb1edd93363..000000000000 --- a/arch/arm/configs/at91cap9adk_defconfig +++ /dev/null @@ -1,115 +0,0 @@ -CONFIG_EXPERIMENTAL=y -# CONFIG_LOCALVERSION_AUTO is not set -# CONFIG_SWAP is not set -CONFIG_SYSVIPC=y -CONFIG_LOG_BUF_SHIFT=14 -CONFIG_BLK_DEV_INITRD=y -CONFIG_SLAB=y -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -# CONFIG_BLK_DEV_BSG is not set -# CONFIG_IOSCHED_DEADLINE is not set -# CONFIG_IOSCHED_CFQ is not set -CONFIG_ARCH_AT91=y -CONFIG_ARCH_AT91CAP9=y -CONFIG_MACH_AT91CAP9ADK=y -CONFIG_MTD_AT91_DATAFLASH_CARD=y -CONFIG_AT91_PROGRAMMABLE_CLOCKS=y -# CONFIG_ARM_THUMB is not set -CONFIG_AEABI=y -CONFIG_LEDS=y -CONFIG_LEDS_CPU=y -CONFIG_ZBOOT_ROM_TEXT=0x0 -CONFIG_ZBOOT_ROM_BSS=0x0 -CONFIG_CMDLINE="console=ttyS0,115200 root=/dev/ram0 rw" -CONFIG_FPE_NWFPE=y -CONFIG_NET=y -CONFIG_PACKET=y -CONFIG_UNIX=y -CONFIG_INET=y -CONFIG_IP_PNP=y -CONFIG_IP_PNP_BOOTP=y -CONFIG_IP_PNP_RARP=y -# CONFIG_INET_XFRM_MODE_TRANSPORT is not set -# CONFIG_INET_XFRM_MODE_TUNNEL is not set -# CONFIG_INET_XFRM_MODE_BEET is not set -# CONFIG_INET_LRO is not set -# CONFIG_INET_DIAG is not set -# CONFIG_IPV6 is not set -CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" -CONFIG_MTD=y -CONFIG_MTD_PARTITIONS=y -CONFIG_MTD_CMDLINE_PARTS=y -CONFIG_MTD_CHAR=y -CONFIG_MTD_BLOCK=y -CONFIG_MTD_CFI=y -CONFIG_MTD_JEDECPROBE=y -CONFIG_MTD_CFI_AMDSTD=y -CONFIG_MTD_PHYSMAP=y -CONFIG_MTD_DATAFLASH=y -CONFIG_MTD_NAND=y -CONFIG_MTD_NAND_ATMEL=y -CONFIG_BLK_DEV_LOOP=y -CONFIG_BLK_DEV_RAM=y -CONFIG_BLK_DEV_RAM_SIZE=8192 -CONFIG_ATMEL_SSC=y -CONFIG_SCSI=y -CONFIG_BLK_DEV_SD=y -CONFIG_SCSI_MULTI_LUN=y -CONFIG_NETDEVICES=y -CONFIG_NET_ETHERNET=y -CONFIG_MII=y -CONFIG_MACB=y -# CONFIG_NETDEV_1000 is not set -# CONFIG_NETDEV_10000 is not set -# CONFIG_INPUT_MOUSEDEV_PSAUX is not set -CONFIG_INPUT_EVDEV=y -# CONFIG_INPUT_KEYBOARD is not set -# CONFIG_INPUT_MOUSE is not set -CONFIG_INPUT_TOUCHSCREEN=y -CONFIG_TOUCHSCREEN_ADS7846=y -# CONFIG_SERIO is not set -CONFIG_SERIAL_ATMEL=y -CONFIG_SERIAL_ATMEL_CONSOLE=y -CONFIG_HW_RANDOM=y -CONFIG_I2C=y -CONFIG_I2C_CHARDEV=y -CONFIG_SPI=y -CONFIG_SPI_ATMEL=y -# CONFIG_HWMON is not set -CONFIG_WATCHDOG=y -CONFIG_WATCHDOG_NOWAYOUT=y -CONFIG_FB=y -CONFIG_FB_ATMEL=y -# CONFIG_VGA_CONSOLE is not set -CONFIG_LOGO=y -# CONFIG_LOGO_LINUX_MONO is not set -# CONFIG_LOGO_LINUX_CLUT224 is not set -# CONFIG_USB_HID is not set -CONFIG_USB=y -CONFIG_USB_DEVICEFS=y -CONFIG_USB_MON=y -CONFIG_USB_OHCI_HCD=y -CONFIG_USB_STORAGE=y -CONFIG_USB_GADGET=y -CONFIG_USB_ETH=m -CONFIG_USB_FILE_STORAGE=m -CONFIG_MMC=y -CONFIG_MMC_AT91=m -CONFIG_RTC_CLASS=y -CONFIG_RTC_DRV_AT91SAM9=y -CONFIG_EXT2_FS=y -CONFIG_INOTIFY=y -CONFIG_VFAT_FS=y -CONFIG_TMPFS=y -CONFIG_JFFS2_FS=y -CONFIG_CRAMFS=y -CONFIG_NFS_FS=y -CONFIG_ROOT_NFS=y -CONFIG_NLS_CODEPAGE_437=y -CONFIG_NLS_CODEPAGE_850=y -CONFIG_NLS_ISO8859_1=y -CONFIG_DEBUG_FS=y -CONFIG_DEBUG_KERNEL=y -CONFIG_DEBUG_INFO=y -CONFIG_DEBUG_USER=y diff --git a/arch/arm/configs/at91sam9260_defconfig b/arch/arm/configs/at91sam9260_defconfig new file mode 100644 index 000000000000..f8a9226413bf --- /dev/null +++ b/arch/arm/configs/at91sam9260_defconfig @@ -0,0 +1,83 @@ +CONFIG_EXPERIMENTAL=y +# CONFIG_LOCALVERSION_AUTO is not set +# CONFIG_SWAP is not set +CONFIG_SYSVIPC=y +CONFIG_LOG_BUF_SHIFT=14 +CONFIG_BLK_DEV_INITRD=y +CONFIG_SLAB=y +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +# CONFIG_BLK_DEV_BSG is not set +# CONFIG_IOSCHED_DEADLINE is not set +# CONFIG_IOSCHED_CFQ is not set +CONFIG_ARCH_AT91=y +CONFIG_ARCH_AT91SAM9260=y +CONFIG_MACH_AT91SAM9260EK=y +CONFIG_AT91_PROGRAMMABLE_CLOCKS=y +# CONFIG_ARM_THUMB is not set +CONFIG_ZBOOT_ROM_TEXT=0x0 +CONFIG_ZBOOT_ROM_BSS=0x0 +CONFIG_CMDLINE="mem=64M console=ttyS0,115200 initrd=0x21100000,3145728 root=/dev/ram0 rw" +CONFIG_FPE_NWFPE=y +CONFIG_NET=y +CONFIG_PACKET=y +CONFIG_UNIX=y +CONFIG_INET=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_BOOTP=y +# CONFIG_INET_XFRM_MODE_TRANSPORT is not set +# CONFIG_INET_XFRM_MODE_TUNNEL is not set +# CONFIG_INET_XFRM_MODE_BEET is not set +# CONFIG_INET_LRO is not set +# CONFIG_IPV6 is not set +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_SIZE=8192 +CONFIG_ATMEL_SSC=y +CONFIG_SCSI=y +CONFIG_BLK_DEV_SD=y +CONFIG_SCSI_MULTI_LUN=y +CONFIG_NETDEVICES=y +CONFIG_NET_ETHERNET=y +CONFIG_MII=y +CONFIG_MACB=y +# CONFIG_INPUT_MOUSEDEV_PSAUX is not set +# CONFIG_INPUT_KEYBOARD is not set +# CONFIG_INPUT_MOUSE is not set +# CONFIG_SERIO is not set +CONFIG_SERIAL_ATMEL=y +CONFIG_SERIAL_ATMEL_CONSOLE=y +# CONFIG_HW_RANDOM is not set +CONFIG_I2C=y +CONFIG_I2C_CHARDEV=y +CONFIG_I2C_GPIO=y +# CONFIG_HWMON is not set +CONFIG_WATCHDOG=y +CONFIG_WATCHDOG_NOWAYOUT=y +CONFIG_AT91SAM9X_WATCHDOG=y +# CONFIG_VGA_CONSOLE is not set +# CONFIG_USB_HID is not set +CONFIG_USB=y +CONFIG_USB_DEVICEFS=y +CONFIG_USB_MON=y +CONFIG_USB_OHCI_HCD=y +CONFIG_USB_STORAGE=y +CONFIG_USB_STORAGE_DEBUG=y +CONFIG_USB_GADGET=y +CONFIG_USB_ZERO=m +CONFIG_USB_GADGETFS=m +CONFIG_USB_FILE_STORAGE=m +CONFIG_USB_G_SERIAL=m +CONFIG_RTC_CLASS=y +CONFIG_RTC_DRV_AT91SAM9=y +CONFIG_EXT2_FS=y +CONFIG_INOTIFY=y +CONFIG_VFAT_FS=y +CONFIG_TMPFS=y +CONFIG_CRAMFS=y +CONFIG_NLS_CODEPAGE_437=y +CONFIG_NLS_CODEPAGE_850=y +CONFIG_NLS_ISO8859_1=y +CONFIG_DEBUG_KERNEL=y +CONFIG_DEBUG_USER=y +CONFIG_DEBUG_LL=y diff --git a/arch/arm/configs/at91sam9260ek_defconfig b/arch/arm/configs/at91sam9260ek_defconfig deleted file mode 100644 index f8a9226413bf..000000000000 --- a/arch/arm/configs/at91sam9260ek_defconfig +++ /dev/null @@ -1,83 +0,0 @@ -CONFIG_EXPERIMENTAL=y -# CONFIG_LOCALVERSION_AUTO is not set -# CONFIG_SWAP is not set -CONFIG_SYSVIPC=y -CONFIG_LOG_BUF_SHIFT=14 -CONFIG_BLK_DEV_INITRD=y -CONFIG_SLAB=y -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -# CONFIG_BLK_DEV_BSG is not set -# CONFIG_IOSCHED_DEADLINE is not set -# CONFIG_IOSCHED_CFQ is not set -CONFIG_ARCH_AT91=y -CONFIG_ARCH_AT91SAM9260=y -CONFIG_MACH_AT91SAM9260EK=y -CONFIG_AT91_PROGRAMMABLE_CLOCKS=y -# CONFIG_ARM_THUMB is not set -CONFIG_ZBOOT_ROM_TEXT=0x0 -CONFIG_ZBOOT_ROM_BSS=0x0 -CONFIG_CMDLINE="mem=64M console=ttyS0,115200 initrd=0x21100000,3145728 root=/dev/ram0 rw" -CONFIG_FPE_NWFPE=y -CONFIG_NET=y -CONFIG_PACKET=y -CONFIG_UNIX=y -CONFIG_INET=y -CONFIG_IP_PNP=y -CONFIG_IP_PNP_BOOTP=y -# CONFIG_INET_XFRM_MODE_TRANSPORT is not set -# CONFIG_INET_XFRM_MODE_TUNNEL is not set -# CONFIG_INET_XFRM_MODE_BEET is not set -# CONFIG_INET_LRO is not set -# CONFIG_IPV6 is not set -CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" -CONFIG_BLK_DEV_RAM=y -CONFIG_BLK_DEV_RAM_SIZE=8192 -CONFIG_ATMEL_SSC=y -CONFIG_SCSI=y -CONFIG_BLK_DEV_SD=y -CONFIG_SCSI_MULTI_LUN=y -CONFIG_NETDEVICES=y -CONFIG_NET_ETHERNET=y -CONFIG_MII=y -CONFIG_MACB=y -# CONFIG_INPUT_MOUSEDEV_PSAUX is not set -# CONFIG_INPUT_KEYBOARD is not set -# CONFIG_INPUT_MOUSE is not set -# CONFIG_SERIO is not set -CONFIG_SERIAL_ATMEL=y -CONFIG_SERIAL_ATMEL_CONSOLE=y -# CONFIG_HW_RANDOM is not set -CONFIG_I2C=y -CONFIG_I2C_CHARDEV=y -CONFIG_I2C_GPIO=y -# CONFIG_HWMON is not set -CONFIG_WATCHDOG=y -CONFIG_WATCHDOG_NOWAYOUT=y -CONFIG_AT91SAM9X_WATCHDOG=y -# CONFIG_VGA_CONSOLE is not set -# CONFIG_USB_HID is not set -CONFIG_USB=y -CONFIG_USB_DEVICEFS=y -CONFIG_USB_MON=y -CONFIG_USB_OHCI_HCD=y -CONFIG_USB_STORAGE=y -CONFIG_USB_STORAGE_DEBUG=y -CONFIG_USB_GADGET=y -CONFIG_USB_ZERO=m -CONFIG_USB_GADGETFS=m -CONFIG_USB_FILE_STORAGE=m -CONFIG_USB_G_SERIAL=m -CONFIG_RTC_CLASS=y -CONFIG_RTC_DRV_AT91SAM9=y -CONFIG_EXT2_FS=y -CONFIG_INOTIFY=y -CONFIG_VFAT_FS=y -CONFIG_TMPFS=y -CONFIG_CRAMFS=y -CONFIG_NLS_CODEPAGE_437=y -CONFIG_NLS_CODEPAGE_850=y -CONFIG_NLS_ISO8859_1=y -CONFIG_DEBUG_KERNEL=y -CONFIG_DEBUG_USER=y -CONFIG_DEBUG_LL=y diff --git a/arch/arm/configs/at91sam9g20_defconfig b/arch/arm/configs/at91sam9g20_defconfig new file mode 100644 index 000000000000..9e90e6d79297 --- /dev/null +++ b/arch/arm/configs/at91sam9g20_defconfig @@ -0,0 +1,123 @@ +CONFIG_EXPERIMENTAL=y +# CONFIG_LOCALVERSION_AUTO is not set +# CONFIG_SWAP is not set +CONFIG_SYSVIPC=y +CONFIG_LOG_BUF_SHIFT=14 +CONFIG_BLK_DEV_INITRD=y +CONFIG_SLAB=y +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +# CONFIG_BLK_DEV_BSG is not set +# CONFIG_IOSCHED_DEADLINE is not set +# CONFIG_IOSCHED_CFQ is not set +CONFIG_ARCH_AT91=y +CONFIG_ARCH_AT91SAM9G20=y +CONFIG_MACH_AT91SAM9G20EK=y +CONFIG_MACH_AT91SAM9G20EK_2MMC=y +CONFIG_AT91_PROGRAMMABLE_CLOCKS=y +# CONFIG_ARM_THUMB is not set +CONFIG_AEABI=y +CONFIG_LEDS=y +CONFIG_LEDS_CPU=y +CONFIG_ZBOOT_ROM_TEXT=0x0 +CONFIG_ZBOOT_ROM_BSS=0x0 +CONFIG_CMDLINE="mem=64M console=ttyS0,115200 initrd=0x21100000,3145728 root=/dev/ram0 rw" +CONFIG_FPE_NWFPE=y +CONFIG_PM=y +CONFIG_NET=y +CONFIG_PACKET=y +CONFIG_UNIX=y +CONFIG_INET=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_BOOTP=y +# CONFIG_INET_XFRM_MODE_TRANSPORT is not set +# CONFIG_INET_XFRM_MODE_TUNNEL is not set +# CONFIG_INET_XFRM_MODE_BEET is not set +# CONFIG_INET_LRO is not set +# CONFIG_IPV6 is not set +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_MTD=y +CONFIG_MTD_CONCAT=y +CONFIG_MTD_PARTITIONS=y +CONFIG_MTD_CMDLINE_PARTS=y +CONFIG_MTD_CHAR=y +CONFIG_MTD_BLOCK=y +CONFIG_MTD_DATAFLASH=y +CONFIG_MTD_NAND=y +CONFIG_MTD_NAND_ATMEL=y +CONFIG_BLK_DEV_LOOP=y +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_SIZE=8192 +CONFIG_ATMEL_SSC=y +CONFIG_SCSI=y +CONFIG_BLK_DEV_SD=y +CONFIG_SCSI_MULTI_LUN=y +# CONFIG_SCSI_LOWLEVEL is not set +CONFIG_NETDEVICES=y +CONFIG_NET_ETHERNET=y +CONFIG_MII=y +CONFIG_MACB=y +# CONFIG_NETDEV_1000 is not set +# CONFIG_NETDEV_10000 is not set +# CONFIG_INPUT_MOUSEDEV_PSAUX is not set +CONFIG_INPUT_MOUSEDEV_SCREEN_X=320 +CONFIG_INPUT_MOUSEDEV_SCREEN_Y=240 +CONFIG_INPUT_EVDEV=y +# CONFIG_KEYBOARD_ATKBD is not set +CONFIG_KEYBOARD_GPIO=y +# CONFIG_INPUT_MOUSE is not set +CONFIG_SERIAL_ATMEL=y +CONFIG_SERIAL_ATMEL_CONSOLE=y +CONFIG_LEGACY_PTY_COUNT=16 +CONFIG_HW_RANDOM=y +CONFIG_SPI=y +CONFIG_SPI_ATMEL=y +CONFIG_SPI_SPIDEV=y +# CONFIG_HWMON is not set +# CONFIG_VGA_CONSOLE is not set +CONFIG_SOUND=y +CONFIG_SND=y +CONFIG_SND_SEQUENCER=y +CONFIG_SND_MIXER_OSS=y +CONFIG_SND_PCM_OSS=y +CONFIG_SND_SEQUENCER_OSS=y +# CONFIG_SND_VERBOSE_PROCFS is not set +CONFIG_SND_AT73C213=y +CONFIG_USB=y +CONFIG_USB_DEVICEFS=y +# CONFIG_USB_DEVICE_CLASS is not set +CONFIG_USB_MON=y +CONFIG_USB_OHCI_HCD=y +CONFIG_USB_STORAGE=y +CONFIG_USB_GADGET=y +CONFIG_USB_ZERO=m +CONFIG_USB_GADGETFS=m +CONFIG_USB_FILE_STORAGE=m +CONFIG_USB_G_SERIAL=m +CONFIG_MMC=y +CONFIG_MMC_AT91=m +CONFIG_NEW_LEDS=y +CONFIG_LEDS_CLASS=y +CONFIG_LEDS_GPIO=y +CONFIG_LEDS_TRIGGERS=y +CONFIG_LEDS_TRIGGER_TIMER=y +CONFIG_LEDS_TRIGGER_HEARTBEAT=y +CONFIG_RTC_CLASS=y +CONFIG_RTC_DRV_AT91SAM9=y +CONFIG_EXT2_FS=y +CONFIG_INOTIFY=y +CONFIG_MSDOS_FS=y +CONFIG_VFAT_FS=y +CONFIG_TMPFS=y +CONFIG_JFFS2_FS=y +CONFIG_JFFS2_SUMMARY=y +CONFIG_CRAMFS=y +CONFIG_NFS_FS=y +CONFIG_NFS_V3=y +CONFIG_ROOT_NFS=y +CONFIG_NLS_CODEPAGE_437=y +CONFIG_NLS_CODEPAGE_850=y +CONFIG_NLS_ISO8859_1=y +CONFIG_NLS_ISO8859_15=y +CONFIG_NLS_UTF8=y +# CONFIG_ENABLE_WARN_DEPRECATED is not set diff --git a/arch/arm/configs/at91sam9g20ek_defconfig b/arch/arm/configs/at91sam9g20ek_defconfig deleted file mode 100644 index 9e90e6d79297..000000000000 --- a/arch/arm/configs/at91sam9g20ek_defconfig +++ /dev/null @@ -1,123 +0,0 @@ -CONFIG_EXPERIMENTAL=y -# CONFIG_LOCALVERSION_AUTO is not set -# CONFIG_SWAP is not set -CONFIG_SYSVIPC=y -CONFIG_LOG_BUF_SHIFT=14 -CONFIG_BLK_DEV_INITRD=y -CONFIG_SLAB=y -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -# CONFIG_BLK_DEV_BSG is not set -# CONFIG_IOSCHED_DEADLINE is not set -# CONFIG_IOSCHED_CFQ is not set -CONFIG_ARCH_AT91=y -CONFIG_ARCH_AT91SAM9G20=y -CONFIG_MACH_AT91SAM9G20EK=y -CONFIG_MACH_AT91SAM9G20EK_2MMC=y -CONFIG_AT91_PROGRAMMABLE_CLOCKS=y -# CONFIG_ARM_THUMB is not set -CONFIG_AEABI=y -CONFIG_LEDS=y -CONFIG_LEDS_CPU=y -CONFIG_ZBOOT_ROM_TEXT=0x0 -CONFIG_ZBOOT_ROM_BSS=0x0 -CONFIG_CMDLINE="mem=64M console=ttyS0,115200 initrd=0x21100000,3145728 root=/dev/ram0 rw" -CONFIG_FPE_NWFPE=y -CONFIG_PM=y -CONFIG_NET=y -CONFIG_PACKET=y -CONFIG_UNIX=y -CONFIG_INET=y -CONFIG_IP_PNP=y -CONFIG_IP_PNP_BOOTP=y -# CONFIG_INET_XFRM_MODE_TRANSPORT is not set -# CONFIG_INET_XFRM_MODE_TUNNEL is not set -# CONFIG_INET_XFRM_MODE_BEET is not set -# CONFIG_INET_LRO is not set -# CONFIG_IPV6 is not set -CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" -CONFIG_MTD=y -CONFIG_MTD_CONCAT=y -CONFIG_MTD_PARTITIONS=y -CONFIG_MTD_CMDLINE_PARTS=y -CONFIG_MTD_CHAR=y -CONFIG_MTD_BLOCK=y -CONFIG_MTD_DATAFLASH=y -CONFIG_MTD_NAND=y -CONFIG_MTD_NAND_ATMEL=y -CONFIG_BLK_DEV_LOOP=y -CONFIG_BLK_DEV_RAM=y -CONFIG_BLK_DEV_RAM_SIZE=8192 -CONFIG_ATMEL_SSC=y -CONFIG_SCSI=y -CONFIG_BLK_DEV_SD=y -CONFIG_SCSI_MULTI_LUN=y -# CONFIG_SCSI_LOWLEVEL is not set -CONFIG_NETDEVICES=y -CONFIG_NET_ETHERNET=y -CONFIG_MII=y -CONFIG_MACB=y -# CONFIG_NETDEV_1000 is not set -# CONFIG_NETDEV_10000 is not set -# CONFIG_INPUT_MOUSEDEV_PSAUX is not set -CONFIG_INPUT_MOUSEDEV_SCREEN_X=320 -CONFIG_INPUT_MOUSEDEV_SCREEN_Y=240 -CONFIG_INPUT_EVDEV=y -# CONFIG_KEYBOARD_ATKBD is not set -CONFIG_KEYBOARD_GPIO=y -# CONFIG_INPUT_MOUSE is not set -CONFIG_SERIAL_ATMEL=y -CONFIG_SERIAL_ATMEL_CONSOLE=y -CONFIG_LEGACY_PTY_COUNT=16 -CONFIG_HW_RANDOM=y -CONFIG_SPI=y -CONFIG_SPI_ATMEL=y -CONFIG_SPI_SPIDEV=y -# CONFIG_HWMON is not set -# CONFIG_VGA_CONSOLE is not set -CONFIG_SOUND=y -CONFIG_SND=y -CONFIG_SND_SEQUENCER=y -CONFIG_SND_MIXER_OSS=y -CONFIG_SND_PCM_OSS=y -CONFIG_SND_SEQUENCER_OSS=y -# CONFIG_SND_VERBOSE_PROCFS is not set -CONFIG_SND_AT73C213=y -CONFIG_USB=y -CONFIG_USB_DEVICEFS=y -# CONFIG_USB_DEVICE_CLASS is not set -CONFIG_USB_MON=y -CONFIG_USB_OHCI_HCD=y -CONFIG_USB_STORAGE=y -CONFIG_USB_GADGET=y -CONFIG_USB_ZERO=m -CONFIG_USB_GADGETFS=m -CONFIG_USB_FILE_STORAGE=m -CONFIG_USB_G_SERIAL=m -CONFIG_MMC=y -CONFIG_MMC_AT91=m -CONFIG_NEW_LEDS=y -CONFIG_LEDS_CLASS=y -CONFIG_LEDS_GPIO=y -CONFIG_LEDS_TRIGGERS=y -CONFIG_LEDS_TRIGGER_TIMER=y -CONFIG_LEDS_TRIGGER_HEARTBEAT=y -CONFIG_RTC_CLASS=y -CONFIG_RTC_DRV_AT91SAM9=y -CONFIG_EXT2_FS=y -CONFIG_INOTIFY=y -CONFIG_MSDOS_FS=y -CONFIG_VFAT_FS=y -CONFIG_TMPFS=y -CONFIG_JFFS2_FS=y -CONFIG_JFFS2_SUMMARY=y -CONFIG_CRAMFS=y -CONFIG_NFS_FS=y -CONFIG_NFS_V3=y -CONFIG_ROOT_NFS=y -CONFIG_NLS_CODEPAGE_437=y -CONFIG_NLS_CODEPAGE_850=y -CONFIG_NLS_ISO8859_1=y -CONFIG_NLS_ISO8859_15=y -CONFIG_NLS_UTF8=y -# CONFIG_ENABLE_WARN_DEPRECATED is not set diff --git a/arch/arm/configs/at91sam9rl_defconfig b/arch/arm/configs/at91sam9rl_defconfig new file mode 100644 index 000000000000..75621e4d03fc --- /dev/null +++ b/arch/arm/configs/at91sam9rl_defconfig @@ -0,0 +1,84 @@ +CONFIG_EXPERIMENTAL=y +# CONFIG_LOCALVERSION_AUTO is not set +# CONFIG_SWAP is not set +CONFIG_SYSVIPC=y +CONFIG_LOG_BUF_SHIFT=14 +CONFIG_BLK_DEV_INITRD=y +CONFIG_SLAB=y +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +# CONFIG_BLK_DEV_BSG is not set +# CONFIG_IOSCHED_DEADLINE is not set +# CONFIG_IOSCHED_CFQ is not set +CONFIG_ARCH_AT91=y +CONFIG_ARCH_AT91SAM9RL=y +CONFIG_MACH_AT91SAM9RLEK=y +CONFIG_AT91_PROGRAMMABLE_CLOCKS=y +# CONFIG_ARM_THUMB is not set +CONFIG_ZBOOT_ROM_TEXT=0x0 +CONFIG_ZBOOT_ROM_BSS=0x0 +CONFIG_CMDLINE="mem=64M console=ttyS0,115200 initrd=0x21100000,17105363 root=/dev/ram0 rw" +CONFIG_FPE_NWFPE=y +CONFIG_NET=y +CONFIG_UNIX=y +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_MTD=y +CONFIG_MTD_CONCAT=y +CONFIG_MTD_PARTITIONS=y +CONFIG_MTD_CMDLINE_PARTS=y +CONFIG_MTD_CHAR=y +CONFIG_MTD_BLOCK=y +CONFIG_MTD_DATAFLASH=y +CONFIG_MTD_NAND=y +CONFIG_MTD_NAND_ATMEL=y +CONFIG_BLK_DEV_LOOP=y +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=4 +CONFIG_BLK_DEV_RAM_SIZE=24576 +CONFIG_ATMEL_SSC=y +CONFIG_SCSI=y +CONFIG_BLK_DEV_SD=y +CONFIG_SCSI_MULTI_LUN=y +# CONFIG_INPUT_MOUSEDEV_PSAUX is not set +CONFIG_INPUT_MOUSEDEV_SCREEN_X=320 +CONFIG_INPUT_MOUSEDEV_SCREEN_Y=240 +CONFIG_INPUT_EVDEV=y +# CONFIG_INPUT_KEYBOARD is not set +# CONFIG_INPUT_MOUSE is not set +CONFIG_INPUT_TOUCHSCREEN=y +CONFIG_TOUCHSCREEN_ATMEL_TSADCC=y +# CONFIG_SERIO is not set +CONFIG_SERIAL_ATMEL=y +CONFIG_SERIAL_ATMEL_CONSOLE=y +# CONFIG_HW_RANDOM is not set +CONFIG_I2C=y +CONFIG_I2C_CHARDEV=y +CONFIG_I2C_GPIO=y +CONFIG_SPI=y +CONFIG_SPI_ATMEL=y +# CONFIG_HWMON is not set +CONFIG_WATCHDOG=y +CONFIG_WATCHDOG_NOWAYOUT=y +CONFIG_AT91SAM9X_WATCHDOG=y +CONFIG_FB=y +CONFIG_FB_ATMEL=y +# CONFIG_VGA_CONSOLE is not set +CONFIG_MMC=y +CONFIG_MMC_AT91=m +CONFIG_RTC_CLASS=y +CONFIG_RTC_DRV_AT91SAM9=y +CONFIG_EXT2_FS=y +CONFIG_INOTIFY=y +CONFIG_MSDOS_FS=y +CONFIG_VFAT_FS=y +CONFIG_TMPFS=y +CONFIG_CRAMFS=y +CONFIG_NLS_CODEPAGE_437=y +CONFIG_NLS_CODEPAGE_850=y +CONFIG_NLS_ISO8859_1=y +CONFIG_NLS_ISO8859_15=y +CONFIG_NLS_UTF8=y +CONFIG_DEBUG_KERNEL=y +CONFIG_DEBUG_INFO=y +CONFIG_DEBUG_USER=y +CONFIG_DEBUG_LL=y diff --git a/arch/arm/configs/at91sam9rlek_defconfig b/arch/arm/configs/at91sam9rlek_defconfig deleted file mode 100644 index 75621e4d03fc..000000000000 --- a/arch/arm/configs/at91sam9rlek_defconfig +++ /dev/null @@ -1,84 +0,0 @@ -CONFIG_EXPERIMENTAL=y -# CONFIG_LOCALVERSION_AUTO is not set -# CONFIG_SWAP is not set -CONFIG_SYSVIPC=y -CONFIG_LOG_BUF_SHIFT=14 -CONFIG_BLK_DEV_INITRD=y -CONFIG_SLAB=y -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -# CONFIG_BLK_DEV_BSG is not set -# CONFIG_IOSCHED_DEADLINE is not set -# CONFIG_IOSCHED_CFQ is not set -CONFIG_ARCH_AT91=y -CONFIG_ARCH_AT91SAM9RL=y -CONFIG_MACH_AT91SAM9RLEK=y -CONFIG_AT91_PROGRAMMABLE_CLOCKS=y -# CONFIG_ARM_THUMB is not set -CONFIG_ZBOOT_ROM_TEXT=0x0 -CONFIG_ZBOOT_ROM_BSS=0x0 -CONFIG_CMDLINE="mem=64M console=ttyS0,115200 initrd=0x21100000,17105363 root=/dev/ram0 rw" -CONFIG_FPE_NWFPE=y -CONFIG_NET=y -CONFIG_UNIX=y -CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" -CONFIG_MTD=y -CONFIG_MTD_CONCAT=y -CONFIG_MTD_PARTITIONS=y -CONFIG_MTD_CMDLINE_PARTS=y -CONFIG_MTD_CHAR=y -CONFIG_MTD_BLOCK=y -CONFIG_MTD_DATAFLASH=y -CONFIG_MTD_NAND=y -CONFIG_MTD_NAND_ATMEL=y -CONFIG_BLK_DEV_LOOP=y -CONFIG_BLK_DEV_RAM=y -CONFIG_BLK_DEV_RAM_COUNT=4 -CONFIG_BLK_DEV_RAM_SIZE=24576 -CONFIG_ATMEL_SSC=y -CONFIG_SCSI=y -CONFIG_BLK_DEV_SD=y -CONFIG_SCSI_MULTI_LUN=y -# CONFIG_INPUT_MOUSEDEV_PSAUX is not set -CONFIG_INPUT_MOUSEDEV_SCREEN_X=320 -CONFIG_INPUT_MOUSEDEV_SCREEN_Y=240 -CONFIG_INPUT_EVDEV=y -# CONFIG_INPUT_KEYBOARD is not set -# CONFIG_INPUT_MOUSE is not set -CONFIG_INPUT_TOUCHSCREEN=y -CONFIG_TOUCHSCREEN_ATMEL_TSADCC=y -# CONFIG_SERIO is not set -CONFIG_SERIAL_ATMEL=y -CONFIG_SERIAL_ATMEL_CONSOLE=y -# CONFIG_HW_RANDOM is not set -CONFIG_I2C=y -CONFIG_I2C_CHARDEV=y -CONFIG_I2C_GPIO=y -CONFIG_SPI=y -CONFIG_SPI_ATMEL=y -# CONFIG_HWMON is not set -CONFIG_WATCHDOG=y -CONFIG_WATCHDOG_NOWAYOUT=y -CONFIG_AT91SAM9X_WATCHDOG=y -CONFIG_FB=y -CONFIG_FB_ATMEL=y -# CONFIG_VGA_CONSOLE is not set -CONFIG_MMC=y -CONFIG_MMC_AT91=m -CONFIG_RTC_CLASS=y -CONFIG_RTC_DRV_AT91SAM9=y -CONFIG_EXT2_FS=y -CONFIG_INOTIFY=y -CONFIG_MSDOS_FS=y -CONFIG_VFAT_FS=y -CONFIG_TMPFS=y -CONFIG_CRAMFS=y -CONFIG_NLS_CODEPAGE_437=y -CONFIG_NLS_CODEPAGE_850=y -CONFIG_NLS_ISO8859_1=y -CONFIG_NLS_ISO8859_15=y -CONFIG_NLS_UTF8=y -CONFIG_DEBUG_KERNEL=y -CONFIG_DEBUG_INFO=y -CONFIG_DEBUG_USER=y -CONFIG_DEBUG_LL=y -- cgit v1.2.1 From 9f939adeb2d0bcc079a8b2684761b34709d65407 Mon Sep 17 00:00:00 2001 From: Jean-Christophe PLAGNIOL-VILLARD Date: Sun, 16 Oct 2011 00:07:20 +0800 Subject: ARM: at91: refresh soc defconfig files for 3.2 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD Cc: Nicolas Ferre Signed-off-by: Arnd Bergmann --- arch/arm/configs/at91cap9_defconfig | 7 ----- arch/arm/configs/at91rm9200_defconfig | 47 ++++++++++------------------------ arch/arm/configs/at91sam9260_defconfig | 4 --- arch/arm/configs/at91sam9g20_defconfig | 12 +-------- arch/arm/configs/at91sam9g45_defconfig | 6 +---- arch/arm/configs/at91sam9rl_defconfig | 5 ---- 6 files changed, 16 insertions(+), 65 deletions(-) (limited to 'arch') diff --git a/arch/arm/configs/at91cap9_defconfig b/arch/arm/configs/at91cap9_defconfig index ffb1edd93363..8826eb218e73 100644 --- a/arch/arm/configs/at91cap9_defconfig +++ b/arch/arm/configs/at91cap9_defconfig @@ -38,7 +38,6 @@ CONFIG_IP_PNP_RARP=y # CONFIG_IPV6 is not set CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_MTD=y -CONFIG_MTD_PARTITIONS=y CONFIG_MTD_CMDLINE_PARTS=y CONFIG_MTD_CHAR=y CONFIG_MTD_BLOCK=y @@ -52,16 +51,12 @@ CONFIG_MTD_NAND_ATMEL=y CONFIG_BLK_DEV_LOOP=y CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_SIZE=8192 -CONFIG_ATMEL_SSC=y CONFIG_SCSI=y CONFIG_BLK_DEV_SD=y CONFIG_SCSI_MULTI_LUN=y CONFIG_NETDEVICES=y -CONFIG_NET_ETHERNET=y CONFIG_MII=y CONFIG_MACB=y -# CONFIG_NETDEV_1000 is not set -# CONFIG_NETDEV_10000 is not set # CONFIG_INPUT_MOUSEDEV_PSAUX is not set CONFIG_INPUT_EVDEV=y # CONFIG_INPUT_KEYBOARD is not set @@ -81,7 +76,6 @@ CONFIG_WATCHDOG=y CONFIG_WATCHDOG_NOWAYOUT=y CONFIG_FB=y CONFIG_FB_ATMEL=y -# CONFIG_VGA_CONSOLE is not set CONFIG_LOGO=y # CONFIG_LOGO_LINUX_MONO is not set # CONFIG_LOGO_LINUX_CLUT224 is not set @@ -99,7 +93,6 @@ CONFIG_MMC_AT91=m CONFIG_RTC_CLASS=y CONFIG_RTC_DRV_AT91SAM9=y CONFIG_EXT2_FS=y -CONFIG_INOTIFY=y CONFIG_VFAT_FS=y CONFIG_TMPFS=y CONFIG_JFFS2_FS=y diff --git a/arch/arm/configs/at91rm9200_defconfig b/arch/arm/configs/at91rm9200_defconfig index 38cb7c985426..bbe4e1a1f5d8 100644 --- a/arch/arm/configs/at91rm9200_defconfig +++ b/arch/arm/configs/at91rm9200_defconfig @@ -5,7 +5,6 @@ CONFIG_SYSVIPC=y CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=14 -CONFIG_SYSFS_DEPRECATED_V2=y CONFIG_BLK_DEV_INITRD=y CONFIG_MODULES=y CONFIG_MODULE_FORCE_LOAD=y @@ -56,7 +55,6 @@ CONFIG_IP_PNP=y CONFIG_IP_PNP_DHCP=y CONFIG_IP_PNP_BOOTP=y CONFIG_NET_IPIP=m -CONFIG_NET_IPGRE=m CONFIG_INET_AH=m CONFIG_INET_ESP=m CONFIG_INET_IPCOMP=m @@ -75,18 +73,8 @@ CONFIG_IPV6_TUNNEL=m CONFIG_BRIDGE=m CONFIG_VLAN_8021Q=m CONFIG_BT=m -CONFIG_BT_L2CAP=m -CONFIG_BT_SCO=m -CONFIG_BT_RFCOMM=m -CONFIG_BT_RFCOMM_TTY=y -CONFIG_BT_BNEP=m -CONFIG_BT_BNEP_MC_FILTER=y -CONFIG_BT_BNEP_PROTO_FILTER=y -CONFIG_BT_HIDP=m CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_MTD=y -CONFIG_MTD_CONCAT=y -CONFIG_MTD_PARTITIONS=y CONFIG_MTD_CMDLINE_PARTS=y CONFIG_MTD_AFS_PARTS=y CONFIG_MTD_CHAR=y @@ -108,8 +96,6 @@ CONFIG_BLK_DEV_LOOP=y CONFIG_BLK_DEV_NBD=y CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_SIZE=8192 -CONFIG_ATMEL_TCLIB=y -CONFIG_EEPROM_LEGACY=m CONFIG_SCSI=y CONFIG_BLK_DEV_SD=y CONFIG_BLK_DEV_SR=m @@ -119,14 +105,23 @@ CONFIG_SCSI_MULTI_LUN=y # CONFIG_SCSI_LOWLEVEL is not set CONFIG_NETDEVICES=y CONFIG_TUN=m +CONFIG_ARM_AT91_ETHER=y CONFIG_PHYLIB=y CONFIG_DAVICOM_PHY=y CONFIG_SMSC_PHY=y CONFIG_MICREL_PHY=y -CONFIG_NET_ETHERNET=y -CONFIG_ARM_AT91_ETHER=y -# CONFIG_NETDEV_1000 is not set -# CONFIG_NETDEV_10000 is not set +CONFIG_PPP=y +CONFIG_PPP_BSDCOMP=y +CONFIG_PPP_DEFLATE=y +CONFIG_PPP_FILTER=y +CONFIG_PPP_MPPE=m +CONFIG_PPP_MULTILINK=y +CONFIG_PPPOE=m +CONFIG_PPP_ASYNC=y +CONFIG_SLIP=m +CONFIG_SLIP_COMPRESSED=y +CONFIG_SLIP_SMART=y +CONFIG_SLIP_MODE_SLIP6=y CONFIG_USB_CATC=m CONFIG_USB_KAWETH=m CONFIG_USB_PEGASUS=m @@ -139,18 +134,6 @@ CONFIG_USB_NET_RNDIS_HOST=m CONFIG_USB_ALI_M5632=y CONFIG_USB_AN2720=y CONFIG_USB_EPSON2888=y -CONFIG_PPP=y -CONFIG_PPP_MULTILINK=y -CONFIG_PPP_FILTER=y -CONFIG_PPP_ASYNC=y -CONFIG_PPP_DEFLATE=y -CONFIG_PPP_BSDCOMP=y -CONFIG_PPP_MPPE=m -CONFIG_PPPOE=m -CONFIG_SLIP=m -CONFIG_SLIP_COMPRESSED=y -CONFIG_SLIP_SMART=y -CONFIG_SLIP_MODE_SLIP6=y # CONFIG_INPUT_MOUSEDEV_PSAUX is not set CONFIG_INPUT_MOUSEDEV_SCREEN_X=640 CONFIG_INPUT_MOUSEDEV_SCREEN_Y=480 @@ -158,9 +141,9 @@ CONFIG_INPUT_EVDEV=y CONFIG_KEYBOARD_GPIO=y # CONFIG_INPUT_MOUSE is not set CONFIG_INPUT_TOUCHSCREEN=y +CONFIG_LEGACY_PTY_COUNT=32 CONFIG_SERIAL_ATMEL=y CONFIG_SERIAL_ATMEL_CONSOLE=y -CONFIG_LEGACY_PTY_COUNT=32 CONFIG_HW_RANDOM=y CONFIG_I2C=y CONFIG_I2C_CHARDEV=y @@ -290,7 +273,6 @@ CONFIG_NFS_V3_ACL=y CONFIG_NFS_V4=y CONFIG_ROOT_NFS=y CONFIG_NFSD=y -CONFIG_SMB_FS=m CONFIG_CIFS=m CONFIG_PARTITION_ADVANCED=y CONFIG_MAC_PARTITION=y @@ -335,7 +317,6 @@ CONFIG_NLS_UTF8=y CONFIG_MAGIC_SYSRQ=y CONFIG_DEBUG_FS=y CONFIG_DEBUG_KERNEL=y -# CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_FTRACE is not set CONFIG_CRYPTO_PCBC=y CONFIG_CRYPTO_SHA1=y diff --git a/arch/arm/configs/at91sam9260_defconfig b/arch/arm/configs/at91sam9260_defconfig index f8a9226413bf..8a4c22d7be61 100644 --- a/arch/arm/configs/at91sam9260_defconfig +++ b/arch/arm/configs/at91sam9260_defconfig @@ -33,12 +33,10 @@ CONFIG_IP_PNP_BOOTP=y CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_SIZE=8192 -CONFIG_ATMEL_SSC=y CONFIG_SCSI=y CONFIG_BLK_DEV_SD=y CONFIG_SCSI_MULTI_LUN=y CONFIG_NETDEVICES=y -CONFIG_NET_ETHERNET=y CONFIG_MII=y CONFIG_MACB=y # CONFIG_INPUT_MOUSEDEV_PSAUX is not set @@ -55,7 +53,6 @@ CONFIG_I2C_GPIO=y CONFIG_WATCHDOG=y CONFIG_WATCHDOG_NOWAYOUT=y CONFIG_AT91SAM9X_WATCHDOG=y -# CONFIG_VGA_CONSOLE is not set # CONFIG_USB_HID is not set CONFIG_USB=y CONFIG_USB_DEVICEFS=y @@ -71,7 +68,6 @@ CONFIG_USB_G_SERIAL=m CONFIG_RTC_CLASS=y CONFIG_RTC_DRV_AT91SAM9=y CONFIG_EXT2_FS=y -CONFIG_INOTIFY=y CONFIG_VFAT_FS=y CONFIG_TMPFS=y CONFIG_CRAMFS=y diff --git a/arch/arm/configs/at91sam9g20_defconfig b/arch/arm/configs/at91sam9g20_defconfig index 9e90e6d79297..23966c699065 100644 --- a/arch/arm/configs/at91sam9g20_defconfig +++ b/arch/arm/configs/at91sam9g20_defconfig @@ -23,7 +23,6 @@ CONFIG_ZBOOT_ROM_TEXT=0x0 CONFIG_ZBOOT_ROM_BSS=0x0 CONFIG_CMDLINE="mem=64M console=ttyS0,115200 initrd=0x21100000,3145728 root=/dev/ram0 rw" CONFIG_FPE_NWFPE=y -CONFIG_PM=y CONFIG_NET=y CONFIG_PACKET=y CONFIG_UNIX=y @@ -37,8 +36,6 @@ CONFIG_IP_PNP_BOOTP=y # CONFIG_IPV6 is not set CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_MTD=y -CONFIG_MTD_CONCAT=y -CONFIG_MTD_PARTITIONS=y CONFIG_MTD_CMDLINE_PARTS=y CONFIG_MTD_CHAR=y CONFIG_MTD_BLOCK=y @@ -48,17 +45,13 @@ CONFIG_MTD_NAND_ATMEL=y CONFIG_BLK_DEV_LOOP=y CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_SIZE=8192 -CONFIG_ATMEL_SSC=y CONFIG_SCSI=y CONFIG_BLK_DEV_SD=y CONFIG_SCSI_MULTI_LUN=y # CONFIG_SCSI_LOWLEVEL is not set CONFIG_NETDEVICES=y -CONFIG_NET_ETHERNET=y CONFIG_MII=y CONFIG_MACB=y -# CONFIG_NETDEV_1000 is not set -# CONFIG_NETDEV_10000 is not set # CONFIG_INPUT_MOUSEDEV_PSAUX is not set CONFIG_INPUT_MOUSEDEV_SCREEN_X=320 CONFIG_INPUT_MOUSEDEV_SCREEN_Y=240 @@ -66,15 +59,14 @@ CONFIG_INPUT_EVDEV=y # CONFIG_KEYBOARD_ATKBD is not set CONFIG_KEYBOARD_GPIO=y # CONFIG_INPUT_MOUSE is not set +CONFIG_LEGACY_PTY_COUNT=16 CONFIG_SERIAL_ATMEL=y CONFIG_SERIAL_ATMEL_CONSOLE=y -CONFIG_LEGACY_PTY_COUNT=16 CONFIG_HW_RANDOM=y CONFIG_SPI=y CONFIG_SPI_ATMEL=y CONFIG_SPI_SPIDEV=y # CONFIG_HWMON is not set -# CONFIG_VGA_CONSOLE is not set CONFIG_SOUND=y CONFIG_SND=y CONFIG_SND_SEQUENCER=y @@ -82,7 +74,6 @@ CONFIG_SND_MIXER_OSS=y CONFIG_SND_PCM_OSS=y CONFIG_SND_SEQUENCER_OSS=y # CONFIG_SND_VERBOSE_PROCFS is not set -CONFIG_SND_AT73C213=y CONFIG_USB=y CONFIG_USB_DEVICEFS=y # CONFIG_USB_DEVICE_CLASS is not set @@ -105,7 +96,6 @@ CONFIG_LEDS_TRIGGER_HEARTBEAT=y CONFIG_RTC_CLASS=y CONFIG_RTC_DRV_AT91SAM9=y CONFIG_EXT2_FS=y -CONFIG_INOTIFY=y CONFIG_MSDOS_FS=y CONFIG_VFAT_FS=y CONFIG_TMPFS=y diff --git a/arch/arm/configs/at91sam9g45_defconfig b/arch/arm/configs/at91sam9g45_defconfig index c5876d244f4b..7f8f99919d34 100644 --- a/arch/arm/configs/at91sam9g45_defconfig +++ b/arch/arm/configs/at91sam9g45_defconfig @@ -73,11 +73,8 @@ CONFIG_SCSI_MULTI_LUN=y # CONFIG_SCSI_LOWLEVEL is not set CONFIG_NETDEVICES=y CONFIG_MII=y -CONFIG_DAVICOM_PHY=y -CONFIG_NET_ETHERNET=y CONFIG_MACB=y -# CONFIG_NETDEV_1000 is not set -# CONFIG_NETDEV_10000 is not set +CONFIG_DAVICOM_PHY=y CONFIG_LIBERTAS_THINFIRM=m CONFIG_LIBERTAS_THINFIRM_USB=m CONFIG_AT76C50X_USB=m @@ -131,7 +128,6 @@ CONFIG_I2C_GPIO=y CONFIG_SPI=y CONFIG_SPI_ATMEL=y # CONFIG_HWMON is not set -# CONFIG_MFD_SUPPORT is not set CONFIG_FB=y CONFIG_FB_ATMEL=y CONFIG_FB_UDL=m diff --git a/arch/arm/configs/at91sam9rl_defconfig b/arch/arm/configs/at91sam9rl_defconfig index 75621e4d03fc..ad562ee64209 100644 --- a/arch/arm/configs/at91sam9rl_defconfig +++ b/arch/arm/configs/at91sam9rl_defconfig @@ -23,8 +23,6 @@ CONFIG_NET=y CONFIG_UNIX=y CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_MTD=y -CONFIG_MTD_CONCAT=y -CONFIG_MTD_PARTITIONS=y CONFIG_MTD_CMDLINE_PARTS=y CONFIG_MTD_CHAR=y CONFIG_MTD_BLOCK=y @@ -35,7 +33,6 @@ CONFIG_BLK_DEV_LOOP=y CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=4 CONFIG_BLK_DEV_RAM_SIZE=24576 -CONFIG_ATMEL_SSC=y CONFIG_SCSI=y CONFIG_BLK_DEV_SD=y CONFIG_SCSI_MULTI_LUN=y @@ -62,13 +59,11 @@ CONFIG_WATCHDOG_NOWAYOUT=y CONFIG_AT91SAM9X_WATCHDOG=y CONFIG_FB=y CONFIG_FB_ATMEL=y -# CONFIG_VGA_CONSOLE is not set CONFIG_MMC=y CONFIG_MMC_AT91=m CONFIG_RTC_CLASS=y CONFIG_RTC_DRV_AT91SAM9=y CONFIG_EXT2_FS=y -CONFIG_INOTIFY=y CONFIG_MSDOS_FS=y CONFIG_VFAT_FS=y CONFIG_TMPFS=y -- cgit v1.2.1 From db5509f0c2b7e7c02e1294a10a4d4b04f2720c28 Mon Sep 17 00:00:00 2001 From: Jean-Christophe PLAGNIOL-VILLARD Date: Sun, 16 Oct 2011 00:03:17 +0800 Subject: ARM: at91: enable additional boards in existing soc defconfig files Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD Cc: Nicolas Ferre Signed-off-by: Arnd Bergmann --- arch/arm/configs/at91sam9260_defconfig | 12 ++++++++++++ arch/arm/configs/at91sam9g20_defconfig | 11 +++++++++++ arch/arm/configs/at91sam9g45_defconfig | 1 + 3 files changed, 24 insertions(+) (limited to 'arch') diff --git a/arch/arm/configs/at91sam9260_defconfig b/arch/arm/configs/at91sam9260_defconfig index 8a4c22d7be61..505b3765f87e 100644 --- a/arch/arm/configs/at91sam9260_defconfig +++ b/arch/arm/configs/at91sam9260_defconfig @@ -12,11 +12,23 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_IOSCHED_CFQ is not set CONFIG_ARCH_AT91=y CONFIG_ARCH_AT91SAM9260=y +CONFIG_ARCH_AT91SAM9260_SAM9XE=y CONFIG_MACH_AT91SAM9260EK=y +CONFIG_MACH_CAM60=y +CONFIG_MACH_SAM9_L9260=y +CONFIG_MACH_AFEB9260=y +CONFIG_MACH_USB_A9260=y +CONFIG_MACH_QIL_A9260=y +CONFIG_MACH_CPU9260=y +CONFIG_MACH_FLEXIBITY=y +CONFIG_MACH_SNAPPER_9260=y +CONFIG_MACH_AT91SAM_DT=y CONFIG_AT91_PROGRAMMABLE_CLOCKS=y # CONFIG_ARM_THUMB is not set CONFIG_ZBOOT_ROM_TEXT=0x0 CONFIG_ZBOOT_ROM_BSS=0x0 +CONFIG_ARM_APPENDED_DTB=y +CONFIG_ARM_ATAG_DTB_COMPAT=y CONFIG_CMDLINE="mem=64M console=ttyS0,115200 initrd=0x21100000,3145728 root=/dev/ram0 rw" CONFIG_FPE_NWFPE=y CONFIG_NET=y diff --git a/arch/arm/configs/at91sam9g20_defconfig b/arch/arm/configs/at91sam9g20_defconfig index 23966c699065..9123568d9a8d 100644 --- a/arch/arm/configs/at91sam9g20_defconfig +++ b/arch/arm/configs/at91sam9g20_defconfig @@ -14,6 +14,15 @@ CONFIG_ARCH_AT91=y CONFIG_ARCH_AT91SAM9G20=y CONFIG_MACH_AT91SAM9G20EK=y CONFIG_MACH_AT91SAM9G20EK_2MMC=y +CONFIG_MACH_CPU9G20=y +CONFIG_MACH_ACMENETUSFOXG20=y +CONFIG_MACH_PORTUXG20=y +CONFIG_MACH_STAMP9G20=y +CONFIG_MACH_PCONTROL_G20=y +CONFIG_MACH_GSIA18S=y +CONFIG_MACH_USB_A9G20=y +CONFIG_MACH_SNAPPER_9260=y +CONFIG_MACH_AT91SAM_DT=y CONFIG_AT91_PROGRAMMABLE_CLOCKS=y # CONFIG_ARM_THUMB is not set CONFIG_AEABI=y @@ -21,6 +30,8 @@ CONFIG_LEDS=y CONFIG_LEDS_CPU=y CONFIG_ZBOOT_ROM_TEXT=0x0 CONFIG_ZBOOT_ROM_BSS=0x0 +CONFIG_ARM_APPENDED_DTB=y +CONFIG_ARM_ATAG_DTB_COMPAT=y CONFIG_CMDLINE="mem=64M console=ttyS0,115200 initrd=0x21100000,3145728 root=/dev/ram0 rw" CONFIG_FPE_NWFPE=y CONFIG_NET=y diff --git a/arch/arm/configs/at91sam9g45_defconfig b/arch/arm/configs/at91sam9g45_defconfig index 7f8f99919d34..606d48f3b8f8 100644 --- a/arch/arm/configs/at91sam9g45_defconfig +++ b/arch/arm/configs/at91sam9g45_defconfig @@ -18,6 +18,7 @@ CONFIG_MODULE_UNLOAD=y CONFIG_ARCH_AT91=y CONFIG_ARCH_AT91SAM9G45=y CONFIG_MACH_AT91SAM9M10G45EK=y +CONFIG_MACH_AT91SAM_DT=y CONFIG_AT91_PROGRAMMABLE_CLOCKS=y CONFIG_AT91_SLOW_CLOCK=y CONFIG_AEABI=y -- cgit v1.2.1 From 13020be8be2d5843c3810169cdbcc51f07ff020f Mon Sep 17 00:00:00 2001 From: Kumar Gala Date: Thu, 24 Nov 2011 09:40:07 +0000 Subject: powerpc: Fix compiliation with hugetlbfs enabled arch/powerpc/mm/hugetlbpage.c: In function 'reserve_hugetlb_gpages': arch/powerpc/mm/hugetlbpage.c:312:2: error: implicit declaration of function 'parse_args' Signed-off-by: Kumar Gala Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/mm/hugetlbpage.c | 1 + 1 file changed, 1 insertion(+) (limited to 'arch') diff --git a/arch/powerpc/mm/hugetlbpage.c b/arch/powerpc/mm/hugetlbpage.c index 5964371303ac..8558b572e55d 100644 --- a/arch/powerpc/mm/hugetlbpage.c +++ b/arch/powerpc/mm/hugetlbpage.c @@ -15,6 +15,7 @@ #include #include #include +#include #include #include #include -- cgit v1.2.1 From 49e44064d7e3f24f874a51dd513b83ef9994aa8a Mon Sep 17 00:00:00 2001 From: Tony Breeds Date: Tue, 22 Nov 2011 13:50:46 +0000 Subject: powerpc/44x: Add mtd ndfc to the ppx44x defconfig Signed-off-by: Tony Breeds Acked-by: Josh Boyer Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/configs/ppc44x_defconfig | 2 ++ 1 file changed, 2 insertions(+) (limited to 'arch') diff --git a/arch/powerpc/configs/ppc44x_defconfig b/arch/powerpc/configs/ppc44x_defconfig index 6cdf1c0d2c8a..3b98d7354341 100644 --- a/arch/powerpc/configs/ppc44x_defconfig +++ b/arch/powerpc/configs/ppc44x_defconfig @@ -52,6 +52,8 @@ CONFIG_MTD_CFI=y CONFIG_MTD_JEDECPROBE=y CONFIG_MTD_CFI_AMDSTD=y CONFIG_MTD_PHYSMAP_OF=y +CONFIG_MTD_NAND=m +CONFIG_MTD_NAND_NDFC=m CONFIG_MTD_UBI=m CONFIG_MTD_UBI_GLUEBI=m CONFIG_PROC_DEVICETREE=y -- cgit v1.2.1 From 41dfaa934c5d866d626de9bea785e6168524a47e Mon Sep 17 00:00:00 2001 From: Rob Herring Date: Tue, 22 Nov 2011 04:01:06 +0100 Subject: ARM: 7168/1: use cache type functions for arch_get_unmapped_area There are already cache type decoding functions, so use those instead of custom decode code which only works for ARMv6. Signed-off-by: Rob Herring Acked-by: Nicolas Pitre Acked-by: Will Deacon Signed-off-by: Russell King --- arch/arm/mm/mmap.c | 23 ++++++----------------- 1 file changed, 6 insertions(+), 17 deletions(-) (limited to 'arch') diff --git a/arch/arm/mm/mmap.c b/arch/arm/mm/mmap.c index 74be05f3e03a..44b628e4d6ea 100644 --- a/arch/arm/mm/mmap.c +++ b/arch/arm/mm/mmap.c @@ -9,8 +9,7 @@ #include #include #include -#include -#include +#include #define COLOUR_ALIGN(addr,pgoff) \ ((((addr)+SHMLBA-1)&~(SHMLBA-1)) + \ @@ -32,25 +31,15 @@ arch_get_unmapped_area(struct file *filp, unsigned long addr, struct mm_struct *mm = current->mm; struct vm_area_struct *vma; unsigned long start_addr; -#if defined(CONFIG_CPU_V6) || defined(CONFIG_CPU_V6K) - unsigned int cache_type; - int do_align = 0, aliasing = 0; + int do_align = 0; + int aliasing = cache_is_vipt_aliasing(); /* * We only need to do colour alignment if either the I or D - * caches alias. This is indicated by bits 9 and 21 of the - * cache type register. + * caches alias. */ - cache_type = read_cpuid_cachetype(); - if (cache_type != read_cpuid_id()) { - aliasing = (cache_type | cache_type >> 12) & (1 << 11); - if (aliasing) - do_align = filp || flags & MAP_SHARED; - } -#else -#define do_align 0 -#define aliasing 0 -#endif + if (aliasing) + do_align = filp || (flags & MAP_SHARED); /* * We enforce the MAP_FIXED case. -- cgit v1.2.1 From c89cefed35c8c5f53f36757f8a6768e390394ee3 Mon Sep 17 00:00:00 2001 From: Guennadi Liakhovetski Date: Tue, 22 Nov 2011 23:42:12 +0100 Subject: ARM: 7170/2: fix compilation breakage in entry-armv.S Fix compilation failure, when Thumb support is not enabled: arch/arm/kernel/entry-armv.S: Assembler messages: arch/arm/kernel/entry-armv.S:501: Error: backward ref to unknown label "2:" arch/arm/kernel/entry-armv.S:502: Error: backward ref to unknown label "3:" make[2]: *** [arch/arm/kernel/entry-armv.o] Error 1 Signed-off-by: Guennadi Liakhovetski Reviewed-by: Dave Martin Signed-off-by: Russell King --- arch/arm/kernel/entry-armv.S | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/kernel/entry-armv.S b/arch/arm/kernel/entry-armv.S index 9ad50c4208ae..b145f16c91bc 100644 --- a/arch/arm/kernel/entry-armv.S +++ b/arch/arm/kernel/entry-armv.S @@ -497,7 +497,7 @@ ENDPROC(__und_usr) .popsection .pushsection __ex_table,"a" .long 1b, 4b -#if __LINUX_ARM_ARCH__ >= 7 +#if CONFIG_ARM_THUMB && __LINUX_ARM_ARCH__ >= 6 && CONFIG_CPU_V7 .long 2b, 4b .long 3b, 4b #endif -- cgit v1.2.1 From c36ef4b1762302a493c6cb754073bded084700e2 Mon Sep 17 00:00:00 2001 From: Will Deacon Date: Wed, 23 Nov 2011 11:28:25 +0100 Subject: ARM: 7171/1: unwind: add unwind directives to bitops assembly macros The bitops functions (e.g. _test_and_set_bit) on ARM do not have unwind annotations and therefore the kernel cannot backtrace out of them on a fatal error (for example, NULL pointer dereference). This patch annotates the bitops assembly macros with UNWIND annotations so that we can produce a meaningful backtrace on error. Callers of the macros are modified to pass their function name as a macro parameter, enforcing that the macros are used as standalone function implementations. Acked-by: Dave Martin Signed-off-by: Will Deacon Signed-off-by: Russell King --- arch/arm/lib/bitops.h | 26 ++++++++++++++++++++++---- arch/arm/lib/changebit.S | 4 +--- arch/arm/lib/clearbit.S | 4 +--- arch/arm/lib/setbit.S | 4 +--- arch/arm/lib/testchangebit.S | 4 +--- arch/arm/lib/testclearbit.S | 4 +--- arch/arm/lib/testsetbit.S | 4 +--- 7 files changed, 28 insertions(+), 22 deletions(-) (limited to 'arch') diff --git a/arch/arm/lib/bitops.h b/arch/arm/lib/bitops.h index 10d868a5a481..d6408d1ee543 100644 --- a/arch/arm/lib/bitops.h +++ b/arch/arm/lib/bitops.h @@ -1,5 +1,9 @@ +#include + #if __LINUX_ARM_ARCH__ >= 6 - .macro bitop, instr + .macro bitop, name, instr +ENTRY( \name ) +UNWIND( .fnstart ) ands ip, r1, #3 strneb r1, [ip] @ assert word-aligned mov r2, #1 @@ -13,9 +17,13 @@ cmp r0, #0 bne 1b bx lr +UNWIND( .fnend ) +ENDPROC(\name ) .endm - .macro testop, instr, store + .macro testop, name, instr, store +ENTRY( \name ) +UNWIND( .fnstart ) ands ip, r1, #3 strneb r1, [ip] @ assert word-aligned mov r2, #1 @@ -34,9 +42,13 @@ cmp r0, #0 movne r0, #1 2: bx lr +UNWIND( .fnend ) +ENDPROC(\name ) .endm #else - .macro bitop, instr + .macro bitop, name, instr +ENTRY( \name ) +UNWIND( .fnstart ) ands ip, r1, #3 strneb r1, [ip] @ assert word-aligned and r2, r0, #31 @@ -49,6 +61,8 @@ str r2, [r1, r0, lsl #2] restore_irqs ip mov pc, lr +UNWIND( .fnend ) +ENDPROC(\name ) .endm /** @@ -59,7 +73,9 @@ * Note: we can trivially conditionalise the store instruction * to avoid dirtying the data cache. */ - .macro testop, instr, store + .macro testop, name, instr, store +ENTRY( \name ) +UNWIND( .fnstart ) ands ip, r1, #3 strneb r1, [ip] @ assert word-aligned and r3, r0, #31 @@ -73,5 +89,7 @@ moveq r0, #0 restore_irqs ip mov pc, lr +UNWIND( .fnend ) +ENDPROC(\name ) .endm #endif diff --git a/arch/arm/lib/changebit.S b/arch/arm/lib/changebit.S index 68ed5b62e839..f4027862172f 100644 --- a/arch/arm/lib/changebit.S +++ b/arch/arm/lib/changebit.S @@ -12,6 +12,4 @@ #include "bitops.h" .text -ENTRY(_change_bit) - bitop eor -ENDPROC(_change_bit) +bitop _change_bit, eor diff --git a/arch/arm/lib/clearbit.S b/arch/arm/lib/clearbit.S index 4c04c3b51eeb..f6b75fb64d30 100644 --- a/arch/arm/lib/clearbit.S +++ b/arch/arm/lib/clearbit.S @@ -12,6 +12,4 @@ #include "bitops.h" .text -ENTRY(_clear_bit) - bitop bic -ENDPROC(_clear_bit) +bitop _clear_bit, bic diff --git a/arch/arm/lib/setbit.S b/arch/arm/lib/setbit.S index bbee5c66a23e..618fedae4b37 100644 --- a/arch/arm/lib/setbit.S +++ b/arch/arm/lib/setbit.S @@ -12,6 +12,4 @@ #include "bitops.h" .text -ENTRY(_set_bit) - bitop orr -ENDPROC(_set_bit) +bitop _set_bit, orr diff --git a/arch/arm/lib/testchangebit.S b/arch/arm/lib/testchangebit.S index 15a4d431f229..4becdc3a59cb 100644 --- a/arch/arm/lib/testchangebit.S +++ b/arch/arm/lib/testchangebit.S @@ -12,6 +12,4 @@ #include "bitops.h" .text -ENTRY(_test_and_change_bit) - testop eor, str -ENDPROC(_test_and_change_bit) +testop _test_and_change_bit, eor, str diff --git a/arch/arm/lib/testclearbit.S b/arch/arm/lib/testclearbit.S index 521b66b5b95d..918841dcce7a 100644 --- a/arch/arm/lib/testclearbit.S +++ b/arch/arm/lib/testclearbit.S @@ -12,6 +12,4 @@ #include "bitops.h" .text -ENTRY(_test_and_clear_bit) - testop bicne, strne -ENDPROC(_test_and_clear_bit) +testop _test_and_clear_bit, bicne, strne diff --git a/arch/arm/lib/testsetbit.S b/arch/arm/lib/testsetbit.S index 1c98cc2185bb..8d1b2fe9e487 100644 --- a/arch/arm/lib/testsetbit.S +++ b/arch/arm/lib/testsetbit.S @@ -12,6 +12,4 @@ #include "bitops.h" .text -ENTRY(_test_and_set_bit) - testop orreq, streq -ENDPROC(_test_and_set_bit) +testop _test_and_set_bit, orreq, streq -- cgit v1.2.1 From ea2e7057c0234cfb8b09467d8f137760d371fc72 Mon Sep 17 00:00:00 2001 From: Sumit Bhattacharya Date: Thu, 24 Nov 2011 00:47:12 +0100 Subject: ARM: 7172/1: dma: Drop GFP_COMP for DMA memory allocations dma_alloc_coherent wants to split pages after allocation in order to reduce the memory footprint. This does not work well with GFP_COMP pages, so drop this flag before allocation. This patch is ported from arch/avr32 (commit 3611553ef985ef7c5863c8a94641738addd04cff). [swarren: s/HUGETLB_PAGE/HUGETLBFS/ in comment, minor comment cleanup] Signed-off-by: Sumit Bhattacharya Tested-by: Varun Colbert Signed-off-by: Stephen Warren Signed-off-by: Russell King --- arch/arm/mm/dma-mapping.c | 9 +++++++++ 1 file changed, 9 insertions(+) (limited to 'arch') diff --git a/arch/arm/mm/dma-mapping.c b/arch/arm/mm/dma-mapping.c index ab584569930e..1aa664a1999f 100644 --- a/arch/arm/mm/dma-mapping.c +++ b/arch/arm/mm/dma-mapping.c @@ -332,6 +332,15 @@ __dma_alloc(struct device *dev, size_t size, dma_addr_t *handle, gfp_t gfp, struct page *page; void *addr; + /* + * Following is a work-around (a.k.a. hack) to prevent pages + * with __GFP_COMP being passed to split_page() which cannot + * handle them. The real problem is that this flag probably + * should be 0 on ARM as it is not supported on this + * platform; see CONFIG_HUGETLBFS. + */ + gfp &= ~(__GFP_COMP); + *handle = ~0; size = PAGE_ALIGN(size); -- cgit v1.2.1 From 46589e2922509f9134ce79fa75180886c9765c58 Mon Sep 17 00:00:00 2001 From: Jon Medhurst Date: Thu, 24 Nov 2011 13:01:08 +0100 Subject: ARM: 7174/1: Fix build error in kprobes test code on Thumb2 kernels When compiling kprobes-test-thumb.c an error like below may occur: /tmp/ccKcuJcG.s:19179: Error: offset out of range This is caused by the compiler underestimating the size of the inline assembler instructions containing ".space 0x1000" and failing to spill the literal pool in time to prevent the generation of PC relative load instruction with invalid offsets. The fix implemented by this patch is to replace a single large .space directive by a number of 4 byte .space's. This requires splitting the macros which generate test cases for branch instructions into two forms: one with, and one without support for inserting extra code between branch and target. Acked-by: Nicolas Pitre Signed-off-by: Jon Medhurst Signed-off-by: Russell King --- arch/arm/kernel/kprobes-test-thumb.c | 16 +++--- arch/arm/kernel/kprobes-test.h | 100 ++++++++++++++++++++++++----------- 2 files changed, 78 insertions(+), 38 deletions(-) (limited to 'arch') diff --git a/arch/arm/kernel/kprobes-test-thumb.c b/arch/arm/kernel/kprobes-test-thumb.c index 5e726c31c45a..5d8b85792222 100644 --- a/arch/arm/kernel/kprobes-test-thumb.c +++ b/arch/arm/kernel/kprobes-test-thumb.c @@ -222,8 +222,8 @@ void kprobe_thumb16_test_cases(void) DONT_TEST_IN_ITBLOCK( TEST_BF_R( "cbnz r",0,0, ", 2f") TEST_BF_R( "cbz r",2,-1,", 2f") - TEST_BF_RX( "cbnz r",4,1, ", 2f",0x20) - TEST_BF_RX( "cbz r",7,0, ", 2f",0x40) + TEST_BF_RX( "cbnz r",4,1, ", 2f", SPACE_0x20) + TEST_BF_RX( "cbz r",7,0, ", 2f", SPACE_0x40) ) TEST_R("sxth r0, r",7, HH1,"") TEST_R("sxth r7, r",0, HH2,"") @@ -246,7 +246,7 @@ DONT_TEST_IN_ITBLOCK( TESTCASE_START(code) \ TEST_ARG_PTR(13, offset) \ TEST_ARG_END("") \ - TEST_BRANCH_F(code,0) \ + TEST_BRANCH_F(code) \ TESTCASE_END TEST("push {r0}") @@ -319,8 +319,8 @@ CONDITION_INSTRUCTIONS(8, TEST_BF( "b 2f") TEST_BB( "b 2b") - TEST_BF_X("b 2f", 0x400) - TEST_BB_X("b 2b", 0x400) + TEST_BF_X("b 2f", SPACE_0x400) + TEST_BB_X("b 2b", SPACE_0x400) TEST_GROUP("Testing instructions in IT blocks") @@ -746,7 +746,7 @@ CONDITION_INSTRUCTIONS(22, TEST_BB("bne.w 2b") TEST_BF("bgt.w 2f") TEST_BB("blt.w 2b") - TEST_BF_X("bpl.w 2f",0x1000) + TEST_BF_X("bpl.w 2f", SPACE_0x1000) ) TEST_UNSUPPORTED("msr cpsr, r0") @@ -786,11 +786,11 @@ CONDITION_INSTRUCTIONS(22, TEST_BF( "b.w 2f") TEST_BB( "b.w 2b") - TEST_BF_X("b.w 2f", 0x1000) + TEST_BF_X("b.w 2f", SPACE_0x1000) TEST_BF( "bl.w 2f") TEST_BB( "bl.w 2b") - TEST_BB_X("bl.w 2b", 0x1000) + TEST_BB_X("bl.w 2b", SPACE_0x1000) TEST_X( "blx __dummy_arm_subroutine", ".arm \n\t" diff --git a/arch/arm/kernel/kprobes-test.h b/arch/arm/kernel/kprobes-test.h index 0dc5d77b9356..e28a869b1ae4 100644 --- a/arch/arm/kernel/kprobes-test.h +++ b/arch/arm/kernel/kprobes-test.h @@ -149,23 +149,31 @@ struct test_arg_end { "1: "instruction" \n\t" \ " nop \n\t" -#define TEST_BRANCH_F(instruction, xtra_dist) \ +#define TEST_BRANCH_F(instruction) \ TEST_INSTRUCTION(instruction) \ - ".if "#xtra_dist" \n\t" \ " b 99f \n\t" \ - ".space "#xtra_dist" \n\t" \ - ".endif \n\t" \ + "2: nop \n\t" + +#define TEST_BRANCH_B(instruction) \ + " b 50f \n\t" \ + " b 99f \n\t" \ + "2: nop \n\t" \ + " b 99f \n\t" \ + TEST_INSTRUCTION(instruction) + +#define TEST_BRANCH_FX(instruction, codex) \ + TEST_INSTRUCTION(instruction) \ + " b 99f \n\t" \ + codex" \n\t" \ " b 99f \n\t" \ "2: nop \n\t" -#define TEST_BRANCH_B(instruction, xtra_dist) \ +#define TEST_BRANCH_BX(instruction, codex) \ " b 50f \n\t" \ " b 99f \n\t" \ "2: nop \n\t" \ " b 99f \n\t" \ - ".if "#xtra_dist" \n\t" \ - ".space "#xtra_dist" \n\t" \ - ".endif \n\t" \ + codex" \n\t" \ TEST_INSTRUCTION(instruction) #define TESTCASE_END \ @@ -301,47 +309,60 @@ struct test_arg_end { TESTCASE_START(code1 #reg1 code2) \ TEST_ARG_PTR(reg1, val1) \ TEST_ARG_END("") \ - TEST_BRANCH_F(code1 #reg1 code2, 0) \ + TEST_BRANCH_F(code1 #reg1 code2) \ TESTCASE_END -#define TEST_BF_X(code, xtra_dist) \ +#define TEST_BF(code) \ TESTCASE_START(code) \ TEST_ARG_END("") \ - TEST_BRANCH_F(code, xtra_dist) \ + TEST_BRANCH_F(code) \ TESTCASE_END -#define TEST_BB_X(code, xtra_dist) \ +#define TEST_BB(code) \ TESTCASE_START(code) \ TEST_ARG_END("") \ - TEST_BRANCH_B(code, xtra_dist) \ + TEST_BRANCH_B(code) \ TESTCASE_END -#define TEST_BF_RX(code1, reg, val, code2, xtra_dist) \ - TESTCASE_START(code1 #reg code2) \ - TEST_ARG_REG(reg, val) \ - TEST_ARG_END("") \ - TEST_BRANCH_F(code1 #reg code2, xtra_dist) \ +#define TEST_BF_R(code1, reg, val, code2) \ + TESTCASE_START(code1 #reg code2) \ + TEST_ARG_REG(reg, val) \ + TEST_ARG_END("") \ + TEST_BRANCH_F(code1 #reg code2) \ TESTCASE_END -#define TEST_BB_RX(code1, reg, val, code2, xtra_dist) \ - TESTCASE_START(code1 #reg code2) \ - TEST_ARG_REG(reg, val) \ - TEST_ARG_END("") \ - TEST_BRANCH_B(code1 #reg code2, xtra_dist) \ +#define TEST_BB_R(code1, reg, val, code2) \ + TESTCASE_START(code1 #reg code2) \ + TEST_ARG_REG(reg, val) \ + TEST_ARG_END("") \ + TEST_BRANCH_B(code1 #reg code2) \ TESTCASE_END -#define TEST_BF(code) TEST_BF_X(code, 0) -#define TEST_BB(code) TEST_BB_X(code, 0) - -#define TEST_BF_R(code1, reg, val, code2) TEST_BF_RX(code1, reg, val, code2, 0) -#define TEST_BB_R(code1, reg, val, code2) TEST_BB_RX(code1, reg, val, code2, 0) - #define TEST_BF_RR(code1, reg1, val1, code2, reg2, val2, code3) \ TESTCASE_START(code1 #reg1 code2 #reg2 code3) \ TEST_ARG_REG(reg1, val1) \ TEST_ARG_REG(reg2, val2) \ TEST_ARG_END("") \ - TEST_BRANCH_F(code1 #reg1 code2 #reg2 code3, 0) \ + TEST_BRANCH_F(code1 #reg1 code2 #reg2 code3) \ + TESTCASE_END + +#define TEST_BF_X(code, codex) \ + TESTCASE_START(code) \ + TEST_ARG_END("") \ + TEST_BRANCH_FX(code, codex) \ + TESTCASE_END + +#define TEST_BB_X(code, codex) \ + TESTCASE_START(code) \ + TEST_ARG_END("") \ + TEST_BRANCH_BX(code, codex) \ + TESTCASE_END + +#define TEST_BF_RX(code1, reg, val, code2, codex) \ + TESTCASE_START(code1 #reg code2) \ + TEST_ARG_REG(reg, val) \ + TEST_ARG_END("") \ + TEST_BRANCH_FX(code1 #reg code2, codex) \ TESTCASE_END #define TEST_X(code, codex) \ @@ -372,6 +393,25 @@ struct test_arg_end { TESTCASE_END +/* + * Macros for defining space directives spread over multiple lines. + * These are required so the compiler guesses better the length of inline asm + * code and will spill the literal pool early enough to avoid generating PC + * relative loads with out of range offsets. + */ +#define TWICE(x) x x +#define SPACE_0x8 TWICE(".space 4\n\t") +#define SPACE_0x10 TWICE(SPACE_0x8) +#define SPACE_0x20 TWICE(SPACE_0x10) +#define SPACE_0x40 TWICE(SPACE_0x20) +#define SPACE_0x80 TWICE(SPACE_0x40) +#define SPACE_0x100 TWICE(SPACE_0x80) +#define SPACE_0x200 TWICE(SPACE_0x100) +#define SPACE_0x400 TWICE(SPACE_0x200) +#define SPACE_0x800 TWICE(SPACE_0x400) +#define SPACE_0x1000 TWICE(SPACE_0x800) + + /* Various values used in test cases... */ #define N(val) (val ^ 0xffffffff) #define VAL1 0x12345678 -- cgit v1.2.1 From abdd7b91dab2f8b2e32e90e4b7e809ffb462a662 Mon Sep 17 00:00:00 2001 From: Marc Zyngier Date: Fri, 25 Nov 2011 17:58:19 +0100 Subject: ARM: 7176/1: cpu_pm: register GIC PM notifier only once When multiple GICs exist on a platform (RealView PB1176/11MP), we must make sure the PM notifier block is only registered once, otherwise we end up corrupting the PM notifier list. The fix is to only register the notifier when initializing the first GIC, as the power management functions seem to iterate over all the registered GICs. Tested on PB11MP and PB1176. Reported-by: Will Deacon Tested-by: Will Deacon Cc: Colin Cross Signed-off-by: Marc Zyngier Signed-off-by: Russell King --- arch/arm/common/gic.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/common/gic.c b/arch/arm/common/gic.c index 0e6ae470c94f..43240f315dea 100644 --- a/arch/arm/common/gic.c +++ b/arch/arm/common/gic.c @@ -526,7 +526,8 @@ static void __init gic_pm_init(struct gic_chip_data *gic) sizeof(u32)); BUG_ON(!gic->saved_ppi_conf); - cpu_pm_register_notifier(&gic_notifier_block); + if (gic == &gic_data[0]) + cpu_pm_register_notifier(&gic_notifier_block); } #else static void __init gic_pm_init(struct gic_chip_data *gic) -- cgit v1.2.1 From fe41db7b3aca512e19b8ef4fbd5ad55545005d25 Mon Sep 17 00:00:00 2001 From: Will Deacon Date: Fri, 25 Nov 2011 19:23:36 +0100 Subject: ARM: 7177/1: GIC: avoid skipping non-existent PPIs in irq_start calculation Commit 4294f8baa ("ARM: gic: add irq_domain support") defines irq_start as irq_start = (irq_start & ~31) + 16; On a platform with a GIC and a CPU without PPIs, this results in irq_start being off by 16. This patch fixes gic_init so that we only carve out a PPI space when PPIs exist for the GIC being initialised. Cc: Rob Herring Signed-off-by: Will Deacon Signed-off-by: Russell King --- arch/arm/common/gic.c | 13 ++++++++----- 1 file changed, 8 insertions(+), 5 deletions(-) (limited to 'arch') diff --git a/arch/arm/common/gic.c b/arch/arm/common/gic.c index 43240f315dea..410a546060a2 100644 --- a/arch/arm/common/gic.c +++ b/arch/arm/common/gic.c @@ -582,13 +582,16 @@ void __init gic_init(unsigned int gic_nr, int irq_start, * For primary GICs, skip over SGIs. * For secondary GICs, skip over PPIs, too. */ + domain->hwirq_base = 32; if (gic_nr == 0) { gic_cpu_base_addr = cpu_base; - domain->hwirq_base = 16; - if (irq_start > 0) - irq_start = (irq_start & ~31) + 16; - } else - domain->hwirq_base = 32; + + if ((irq_start & 31) > 0) { + domain->hwirq_base = 16; + if (irq_start != -1) + irq_start = (irq_start & ~31) + 16; + } + } /* * Find out how many interrupts are supported. -- cgit v1.2.1 From a5f70b6717a229ad10aa79382a29a8ee6f1976c3 Mon Sep 17 00:00:00 2001 From: Christian Hitz Date: Mon, 24 Oct 2011 08:57:32 +0200 Subject: ARM: at91: fix NAND bus width decoding from system_rev Make it is safe to assign the return value of this function to u8/u16 variables. Signed-off-by: Christian Hitz Signed-off-by: Nicolas Ferre --- arch/arm/mach-at91/include/mach/system_rev.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/mach-at91/include/mach/system_rev.h b/arch/arm/mach-at91/include/mach/system_rev.h index 8f4866045b41..ec164a4124c9 100644 --- a/arch/arm/mach-at91/include/mach/system_rev.h +++ b/arch/arm/mach-at91/include/mach/system_rev.h @@ -19,7 +19,7 @@ #define BOARD_HAVE_NAND_16BIT (1 << 31) static inline int board_have_nand_16bit(void) { - return system_rev & BOARD_HAVE_NAND_16BIT; + return (system_rev & BOARD_HAVE_NAND_16BIT) ? 1 : 0; } #endif /* __ARCH_SYSTEM_REV_H__ */ -- cgit v1.2.1 From 58aa4ebe9c718f77f2003a9f815e070bdb4bff5e Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Wed, 16 Nov 2011 20:44:13 +0100 Subject: ARM: u300: update defconfig This updates the U300 defconfig to support some new drivers like FSMC, sets it to use the MMC clock gating scheme, and removes some stale config options. Signed-off-by: Linus Walleij --- arch/arm/configs/u300_defconfig | 13 ++++++------- 1 file changed, 6 insertions(+), 7 deletions(-) (limited to 'arch') diff --git a/arch/arm/configs/u300_defconfig b/arch/arm/configs/u300_defconfig index 4a5a12681be2..374000ec4e4e 100644 --- a/arch/arm/configs/u300_defconfig +++ b/arch/arm/configs/u300_defconfig @@ -14,8 +14,6 @@ CONFIG_MODULE_UNLOAD=y CONFIG_ARCH_U300=y CONFIG_MACH_U300=y CONFIG_MACH_U300_BS335=y -CONFIG_MACH_U300_DUAL_RAM=y -CONFIG_U300_DEBUG=y CONFIG_MACH_U300_SPIDUMMY=y CONFIG_NO_HZ=y CONFIG_HIGH_RES_TIMERS=y @@ -26,19 +24,21 @@ CONFIG_ZBOOT_ROM_BSS=0x0 CONFIG_CMDLINE="root=/dev/ram0 rw rootfstype=rootfs console=ttyAMA0,115200n8 lpj=515072" CONFIG_CPU_IDLE=y CONFIG_FPE_NWFPE=y -CONFIG_PM=y # CONFIG_SUSPEND is not set CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" # CONFIG_PREVENT_FIRMWARE_BUILD is not set -# CONFIG_MISC_DEVICES is not set +CONFIG_MTD=y +CONFIG_MTD_CMDLINE_PARTS=y +CONFIG_MTD_NAND=y +CONFIG_MTD_NAND_FSMC=y # CONFIG_INPUT_MOUSEDEV is not set CONFIG_INPUT_EVDEV=y # CONFIG_KEYBOARD_ATKBD is not set # CONFIG_INPUT_MOUSE is not set # CONFIG_SERIO is not set +CONFIG_LEGACY_PTY_COUNT=16 CONFIG_SERIAL_AMBA_PL011=y CONFIG_SERIAL_AMBA_PL011_CONSOLE=y -CONFIG_LEGACY_PTY_COUNT=16 # CONFIG_HW_RANDOM is not set CONFIG_I2C=y # CONFIG_HWMON is not set @@ -51,6 +51,7 @@ CONFIG_BACKLIGHT_CLASS_DEVICE=y # CONFIG_HID_SUPPORT is not set # CONFIG_USB_SUPPORT is not set CONFIG_MMC=y +CONFIG_MMC_CLKGATE=y CONFIG_MMC_ARMMMCI=y CONFIG_RTC_CLASS=y # CONFIG_RTC_HCTOSYS is not set @@ -65,10 +66,8 @@ CONFIG_NLS_CODEPAGE_437=y CONFIG_NLS_ISO8859_1=y CONFIG_PRINTK_TIME=y CONFIG_DEBUG_FS=y -CONFIG_DEBUG_KERNEL=y # CONFIG_SCHED_DEBUG is not set CONFIG_TIMER_STATS=y # CONFIG_DEBUG_PREEMPT is not set CONFIG_DEBUG_INFO=y -# CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_CRC32 is not set -- cgit v1.2.1 From 6e2a587eb99267367409097b70cb2d61b09e5269 Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Wed, 16 Nov 2011 20:30:35 +0100 Subject: ARM: ux500: update defconfig This updates the Ux500 defconfig with the new drivers for HWSEM and AB5500 core that were merged in the 3.2 cycle. Signed-off-by: Linus Walleij --- arch/arm/configs/u8500_defconfig | 14 +++++--------- 1 file changed, 5 insertions(+), 9 deletions(-) (limited to 'arch') diff --git a/arch/arm/configs/u8500_defconfig b/arch/arm/configs/u8500_defconfig index 97d31a4663da..2d7b6e7b7271 100644 --- a/arch/arm/configs/u8500_defconfig +++ b/arch/arm/configs/u8500_defconfig @@ -10,7 +10,7 @@ CONFIG_MODULE_UNLOAD=y CONFIG_ARCH_U8500=y CONFIG_UX500_SOC_DB5500=y CONFIG_UX500_SOC_DB8500=y -CONFIG_MACH_U8500=y +CONFIG_MACH_HREFV60=y CONFIG_MACH_SNOWBALL=y CONFIG_MACH_U5500=y CONFIG_NO_HZ=y @@ -24,6 +24,7 @@ CONFIG_CPU_FREQ=y CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y CONFIG_VFP=y CONFIG_NEON=y +CONFIG_PM_RUNTIME=y CONFIG_NET=y CONFIG_PACKET=y CONFIG_UNIX=y @@ -41,11 +42,8 @@ CONFIG_MISC_DEVICES=y CONFIG_AB8500_PWM=y CONFIG_SENSORS_BH1780=y CONFIG_NETDEVICES=y -CONFIG_SMSC_PHY=y -CONFIG_NET_ETHERNET=y CONFIG_SMSC911X=y -# CONFIG_NETDEV_1000 is not set -# CONFIG_NETDEV_10000 is not set +CONFIG_SMSC_PHY=y # CONFIG_WLAN is not set # CONFIG_INPUT_MOUSEDEV_PSAUX is not set CONFIG_INPUT_EVDEV=y @@ -72,15 +70,12 @@ CONFIG_SPI=y CONFIG_SPI_PL022=y CONFIG_GPIO_STMPE=y CONFIG_GPIO_TC3589X=y -# CONFIG_HWMON is not set CONFIG_MFD_STMPE=y CONFIG_MFD_TC3589X=y +CONFIG_AB5500_CORE=y CONFIG_AB8500_CORE=y CONFIG_REGULATOR_AB8500=y # CONFIG_HID_SUPPORT is not set -CONFIG_USB_MUSB_HDRC=y -CONFIG_USB_GADGET_MUSB_HDRC=y -CONFIG_MUSB_PIO_ONLY=y CONFIG_USB_GADGET=y CONFIG_AB8500_USB=y CONFIG_MMC=y @@ -97,6 +92,7 @@ CONFIG_DMADEVICES=y CONFIG_STE_DMA40=y CONFIG_STAGING=y CONFIG_TOUCHSCREEN_SYNAPTICS_I2C_RMI4=y +CONFIG_HSEM_U8500=y CONFIG_EXT2_FS=y CONFIG_EXT2_FS_XATTR=y CONFIG_EXT2_FS_POSIX_ACL=y -- cgit v1.2.1 From 1808958d27b1250295f01dff4997d8a8814adaab Mon Sep 17 00:00:00 2001 From: Jean-Christophe PLAGNIOL-VILLARD Date: Mon, 28 Nov 2011 12:53:08 +0100 Subject: ARM: at91: fix clock conid for atmel_tcb.1 on 9260/9g20 The conid is supposed to be t0/t1/t2_clk. Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD Acked-by: Nicolas Ferre Cc: stable --- arch/arm/mach-at91/at91sam9260.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-at91/at91sam9260.c b/arch/arm/mach-at91/at91sam9260.c index b84a9f642f59..0d20677fbef0 100644 --- a/arch/arm/mach-at91/at91sam9260.c +++ b/arch/arm/mach-at91/at91sam9260.c @@ -195,9 +195,9 @@ static struct clk_lookup periph_clocks_lookups[] = { CLKDEV_CON_DEV_ID("t0_clk", "atmel_tcb.0", &tc0_clk), CLKDEV_CON_DEV_ID("t1_clk", "atmel_tcb.0", &tc1_clk), CLKDEV_CON_DEV_ID("t2_clk", "atmel_tcb.0", &tc2_clk), - CLKDEV_CON_DEV_ID("t3_clk", "atmel_tcb.1", &tc3_clk), - CLKDEV_CON_DEV_ID("t4_clk", "atmel_tcb.1", &tc4_clk), - CLKDEV_CON_DEV_ID("t5_clk", "atmel_tcb.1", &tc5_clk), + CLKDEV_CON_DEV_ID("t0_clk", "atmel_tcb.1", &tc3_clk), + CLKDEV_CON_DEV_ID("t1_clk", "atmel_tcb.1", &tc4_clk), + CLKDEV_CON_DEV_ID("t2_clk", "atmel_tcb.1", &tc5_clk), CLKDEV_CON_DEV_ID("pclk", "ssc.0", &ssc_clk), /* more usart lookup table for DT entries */ CLKDEV_CON_DEV_ID("usart", "fffff200.serial", &mck), -- cgit v1.2.1 From 0e934e22f3fabb98c41737e2e30bd9db2668e935 Mon Sep 17 00:00:00 2001 From: Anders Darander Date: Wed, 30 Nov 2011 08:47:44 +0100 Subject: ARM: at91: Fix USB AT91 gadget registration Since 193ab2a6070039e7ee2b9b9bebea754a7c52fd1b, various AT91 boards don't register at91_udc anymore due to depending on a now non-existing symbol. Fix the symbol name. Signed-off-by: Anders Darander Signed-off-by: Nicolas Ferre Cc: stable --- arch/arm/mach-at91/at91rm9200_devices.c | 2 +- arch/arm/mach-at91/at91sam9260_devices.c | 2 +- arch/arm/mach-at91/at91sam9261_devices.c | 2 +- arch/arm/mach-at91/at91sam9263_devices.c | 2 +- 4 files changed, 4 insertions(+), 4 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-at91/at91rm9200_devices.c b/arch/arm/mach-at91/at91rm9200_devices.c index 66591fa53e05..ad930688358c 100644 --- a/arch/arm/mach-at91/at91rm9200_devices.c +++ b/arch/arm/mach-at91/at91rm9200_devices.c @@ -83,7 +83,7 @@ void __init at91_add_device_usbh(struct at91_usbh_data *data) {} * USB Device (Gadget) * -------------------------------------------------------------------- */ -#ifdef CONFIG_USB_GADGET_AT91 +#ifdef CONFIG_USB_AT91 static struct at91_udc_data udc_data; static struct resource udc_resources[] = { diff --git a/arch/arm/mach-at91/at91sam9260_devices.c b/arch/arm/mach-at91/at91sam9260_devices.c index 25e3464fb07f..629fa9774972 100644 --- a/arch/arm/mach-at91/at91sam9260_devices.c +++ b/arch/arm/mach-at91/at91sam9260_devices.c @@ -84,7 +84,7 @@ void __init at91_add_device_usbh(struct at91_usbh_data *data) {} * USB Device (Gadget) * -------------------------------------------------------------------- */ -#ifdef CONFIG_USB_GADGET_AT91 +#ifdef CONFIG_USB_AT91 static struct at91_udc_data udc_data; static struct resource udc_resources[] = { diff --git a/arch/arm/mach-at91/at91sam9261_devices.c b/arch/arm/mach-at91/at91sam9261_devices.c index ae78f4d03b73..a178b58b0b9c 100644 --- a/arch/arm/mach-at91/at91sam9261_devices.c +++ b/arch/arm/mach-at91/at91sam9261_devices.c @@ -87,7 +87,7 @@ void __init at91_add_device_usbh(struct at91_usbh_data *data) {} * USB Device (Gadget) * -------------------------------------------------------------------- */ -#ifdef CONFIG_USB_GADGET_AT91 +#ifdef CONFIG_USB_AT91 static struct at91_udc_data udc_data; static struct resource udc_resources[] = { diff --git a/arch/arm/mach-at91/at91sam9263_devices.c b/arch/arm/mach-at91/at91sam9263_devices.c index ad017eb1f8df..d5fbac9ff4fa 100644 --- a/arch/arm/mach-at91/at91sam9263_devices.c +++ b/arch/arm/mach-at91/at91sam9263_devices.c @@ -92,7 +92,7 @@ void __init at91_add_device_usbh(struct at91_usbh_data *data) {} * USB Device (Gadget) * -------------------------------------------------------------------- */ -#ifdef CONFIG_USB_GADGET_AT91 +#ifdef CONFIG_USB_AT91 static struct at91_udc_data udc_data; static struct resource udc_resources[] = { -- cgit v1.2.1 From 14383c295ab48178c449336f5d74e9e615e36723 Mon Sep 17 00:00:00 2001 From: "Jon Medhurst (Tixy)" Date: Tue, 29 Nov 2011 08:14:35 +0100 Subject: ARM: 7180/1: Change kprobes testcase with unpredictable STRD instruction There is a kprobes testcase for the instruction "strd r2, [r3], r4". This has unpredictable behaviour as it uses r3 for register writeback addressing and also stores it to memory. On a cortex A9, this testcase would fail because the instruction writes the updated value of r3 to memory, whereas the kprobes emulation code writes the original value. Fix this by changing testcase to used r5 instead of r3. Reported-by: Leif Lindholm Tested-by: Leif Lindholm Acked-by: Nicolas Pitre Signed-off-by: Jon Medhurst Signed-off-by: Russell King --- arch/arm/kernel/kprobes-test-arm.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/kernel/kprobes-test-arm.c b/arch/arm/kernel/kprobes-test-arm.c index fc82de8bdcce..edf9ad8d3c6b 100644 --- a/arch/arm/kernel/kprobes-test-arm.c +++ b/arch/arm/kernel/kprobes-test-arm.c @@ -550,7 +550,7 @@ void kprobe_arm_test_cases(void) TEST_RPR( "strccd r",8, VAL2,", [r",13,0, ", r",12,48,"]") TEST_RPR( "strd r",4, VAL1,", [r",2, 24,", r",3, 48,"]!") TEST_RPR( "strcsd r",12,VAL2,", [r",11,48,", -r",10,24,"]!") - TEST_RPR( "strd r",2, VAL1,", [r",3, 24,"], r",4,48,"") + TEST_RPR( "strd r",2, VAL1,", [r",5, 24,"], r",4,48,"") TEST_RPR( "strd r",10,VAL2,", [r",9, 48,"], -r",7,24,"") TEST_UNSUPPORTED(".word 0xe1afc0fa @ strd r12, [pc, r10]!") -- cgit v1.2.1 From b5bed7fe801d1460424b7aeb6b06464e23d2a1e6 Mon Sep 17 00:00:00 2001 From: "Jon Medhurst (Tixy)" Date: Tue, 29 Nov 2011 08:16:02 +0100 Subject: ARM: 7181/1: Restrict kprobes probing SWP instructions to ARMv5 and below The SWP instruction is deprecated on ARMv6 and with ARMv7 it will be UNDEFINED when CONFIG_SWP_EMULATE is selected. In this case, probing a SWP instruction will cause an oops when the kprobes emulation code executes an undefined instruction. As the SWP instruction should be rare or non-existent in kernels for ARMv6 and later, we can simply avoid these problems by not allowing probing of these. Reported-by: Leif Lindholm Tested-by: Leif Lindholm Acked-by: Nicolas Pitre Signed-off-by: Jon Medhurst Signed-off-by: Russell King --- arch/arm/kernel/kprobes-arm.c | 4 +++- arch/arm/kernel/kprobes-test-arm.c | 25 ++++++++++++++++--------- 2 files changed, 19 insertions(+), 10 deletions(-) (limited to 'arch') diff --git a/arch/arm/kernel/kprobes-arm.c b/arch/arm/kernel/kprobes-arm.c index 9fe8910308af..8a30c89da70e 100644 --- a/arch/arm/kernel/kprobes-arm.c +++ b/arch/arm/kernel/kprobes-arm.c @@ -519,10 +519,12 @@ static const union decode_item arm_cccc_0000_____1001_table[] = { static const union decode_item arm_cccc_0001_____1001_table[] = { /* Synchronization primitives */ +#if __LINUX_ARM_ARCH__ < 6 + /* Deprecated on ARMv6 and may be UNDEFINED on v7 */ /* SMP/SWPB cccc 0001 0x00 xxxx xxxx xxxx 1001 xxxx */ DECODE_EMULATEX (0x0fb000f0, 0x01000090, emulate_rd12rn16rm0_rwflags_nopc, REGS(NOPC, NOPC, 0, 0, NOPC)), - +#endif /* LDREX/STREX{,D,B,H} cccc 0001 1xxx xxxx xxxx xxxx 1001 xxxx */ /* And unallocated instructions... */ DECODE_END diff --git a/arch/arm/kernel/kprobes-test-arm.c b/arch/arm/kernel/kprobes-test-arm.c index edf9ad8d3c6b..ba32b393b3f0 100644 --- a/arch/arm/kernel/kprobes-test-arm.c +++ b/arch/arm/kernel/kprobes-test-arm.c @@ -427,18 +427,25 @@ void kprobe_arm_test_cases(void) TEST_GROUP("Synchronization primitives") - /* - * Use hard coded constants for SWP instructions to avoid warnings - * about deprecated instructions. - */ - TEST_RP( ".word 0xe108e097 @ swp lr, r",7,VAL2,", [r",8,0,"]") - TEST_R( ".word 0x610d0091 @ swpvs r0, r",1,VAL1,", [sp]") - TEST_RP( ".word 0xe10cd09e @ swp sp, r",14,VAL2,", [r",12,13*4,"]") +#if __LINUX_ARM_ARCH__ < 6 + TEST_RP("swp lr, r",7,VAL2,", [r",8,0,"]") + TEST_R( "swpvs r0, r",1,VAL1,", [sp]") + TEST_RP("swp sp, r",14,VAL2,", [r",12,13*4,"]") +#else + TEST_UNSUPPORTED(".word 0xe108e097 @ swp lr, r7, [r8]") + TEST_UNSUPPORTED(".word 0x610d0091 @ swpvs r0, r1, [sp]") + TEST_UNSUPPORTED(".word 0xe10cd09e @ swp sp, r14 [r12]") +#endif TEST_UNSUPPORTED(".word 0xe102f091 @ swp pc, r1, [r2]") TEST_UNSUPPORTED(".word 0xe102009f @ swp r0, pc, [r2]") TEST_UNSUPPORTED(".word 0xe10f0091 @ swp r0, r1, [pc]") - TEST_RP( ".word 0xe148e097 @ swpb lr, r",7,VAL2,", [r",8,0,"]") - TEST_R( ".word 0x614d0091 @ swpvsb r0, r",1,VAL1,", [sp]") +#if __LINUX_ARM_ARCH__ < 6 + TEST_RP("swpb lr, r",7,VAL2,", [r",8,0,"]") + TEST_R( "swpvsb r0, r",1,VAL1,", [sp]") +#else + TEST_UNSUPPORTED(".word 0xe148e097 @ swpb lr, r7, [r8]") + TEST_UNSUPPORTED(".word 0x614d0091 @ swpvsb r0, r1, [sp]") +#endif TEST_UNSUPPORTED(".word 0xe142f091 @ swpb pc, r1, [r2]") TEST_UNSUPPORTED(".word 0xe1100090") /* Unallocated space */ -- cgit v1.2.1 From 4cbd6b167f9ed756ced970e0a95538f60ae3b9ab Mon Sep 17 00:00:00 2001 From: Vincent Guittot Date: Tue, 29 Nov 2011 15:50:20 +0100 Subject: ARM: 7182/1: ARM cpu topology: fix warning kernel/sched.c:7354:2: warning: initialization from incompatible pointer type Align cpu_coregroup_mask prototype interface with sched_domain_mask_f typedef use int cpu instead of unsigned int cpu Cc: Signed-off-by: Vincent Guittot Signed-off-by: Russell King --- arch/arm/include/asm/topology.h | 2 +- arch/arm/kernel/topology.c | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/arm/include/asm/topology.h b/arch/arm/include/asm/topology.h index a7e457ed27c3..58b8b84adcd2 100644 --- a/arch/arm/include/asm/topology.h +++ b/arch/arm/include/asm/topology.h @@ -25,7 +25,7 @@ extern struct cputopo_arm cpu_topology[NR_CPUS]; void init_cpu_topology(void); void store_cpu_topology(unsigned int cpuid); -const struct cpumask *cpu_coregroup_mask(unsigned int cpu); +const struct cpumask *cpu_coregroup_mask(int cpu); #else diff --git a/arch/arm/kernel/topology.c b/arch/arm/kernel/topology.c index 1040c00405d0..8200deaa14f6 100644 --- a/arch/arm/kernel/topology.c +++ b/arch/arm/kernel/topology.c @@ -43,7 +43,7 @@ struct cputopo_arm cpu_topology[NR_CPUS]; -const struct cpumask *cpu_coregroup_mask(unsigned int cpu) +const struct cpumask *cpu_coregroup_mask(int cpu) { return &cpu_topology[cpu].core_sibling; } -- cgit v1.2.1 From 2a3267a489f1dc4284b64a4b88c62011946dc7ff Mon Sep 17 00:00:00 2001 From: Shawn Guo Date: Thu, 1 Dec 2011 14:35:29 +0800 Subject: arm/imx: fix return type of callback passed to of_irq_init() The of_irq_init() expects the callback passed by .data of of_device_id return 'int' instead of 'void'. This patch fixes it to have irq_init_cb() return the correct value, and in turn have the secondary interrupt controller (gpio in this case) initialized properly and also eliminate the error message 'of_irq_init: children remain, but no parents' which was overlooked before. Signed-off-by: Shawn Guo --- arch/arm/mach-imx/mach-imx6q.c | 4 +++- arch/arm/mach-mx5/imx51-dt.c | 7 +++++-- arch/arm/mach-mx5/imx53-dt.c | 7 +++++-- 3 files changed, 13 insertions(+), 5 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-imx/mach-imx6q.c b/arch/arm/mach-imx/mach-imx6q.c index 8bf5fa349484..eb7531bdfed7 100644 --- a/arch/arm/mach-imx/mach-imx6q.c +++ b/arch/arm/mach-imx/mach-imx6q.c @@ -36,7 +36,7 @@ static void __init imx6q_map_io(void) imx_scu_map_io(); } -static void __init imx6q_gpio_add_irq_domain(struct device_node *np, +static int __init imx6q_gpio_add_irq_domain(struct device_node *np, struct device_node *interrupt_parent) { static int gpio_irq_base = MXC_GPIO_IRQ_START + ARCH_NR_GPIOS - @@ -44,6 +44,8 @@ static void __init imx6q_gpio_add_irq_domain(struct device_node *np, irq_domain_add_simple(np, gpio_irq_base); gpio_irq_base += 32; + + return 0; } static const struct of_device_id imx6q_irq_match[] __initconst = { diff --git a/arch/arm/mach-mx5/imx51-dt.c b/arch/arm/mach-mx5/imx51-dt.c index ccc61585659b..3451a463a79a 100644 --- a/arch/arm/mach-mx5/imx51-dt.c +++ b/arch/arm/mach-mx5/imx51-dt.c @@ -44,13 +44,14 @@ static const struct of_dev_auxdata imx51_auxdata_lookup[] __initconst = { { /* sentinel */ } }; -static void __init imx51_tzic_add_irq_domain(struct device_node *np, +static int __init imx51_tzic_add_irq_domain(struct device_node *np, struct device_node *interrupt_parent) { irq_domain_add_simple(np, 0); + return 0; } -static void __init imx51_gpio_add_irq_domain(struct device_node *np, +static int __init imx51_gpio_add_irq_domain(struct device_node *np, struct device_node *interrupt_parent) { static int gpio_irq_base = MXC_GPIO_IRQ_START + ARCH_NR_GPIOS - @@ -58,6 +59,8 @@ static void __init imx51_gpio_add_irq_domain(struct device_node *np, irq_domain_add_simple(np, gpio_irq_base); gpio_irq_base += 32; + + return 0; } static const struct of_device_id imx51_irq_match[] __initconst = { diff --git a/arch/arm/mach-mx5/imx53-dt.c b/arch/arm/mach-mx5/imx53-dt.c index ccaa0b81b768..022bc0364b5f 100644 --- a/arch/arm/mach-mx5/imx53-dt.c +++ b/arch/arm/mach-mx5/imx53-dt.c @@ -48,13 +48,14 @@ static const struct of_dev_auxdata imx53_auxdata_lookup[] __initconst = { { /* sentinel */ } }; -static void __init imx53_tzic_add_irq_domain(struct device_node *np, +static int __init imx53_tzic_add_irq_domain(struct device_node *np, struct device_node *interrupt_parent) { irq_domain_add_simple(np, 0); + return 0; } -static void __init imx53_gpio_add_irq_domain(struct device_node *np, +static int __init imx53_gpio_add_irq_domain(struct device_node *np, struct device_node *interrupt_parent) { static int gpio_irq_base = MXC_GPIO_IRQ_START + ARCH_NR_GPIOS - @@ -62,6 +63,8 @@ static void __init imx53_gpio_add_irq_domain(struct device_node *np, irq_domain_add_simple(np, gpio_irq_base); gpio_irq_base += 32; + + return 0; } static const struct of_device_id imx53_irq_match[] __initconst = { -- cgit v1.2.1 From 04aafd713bae8a75933c7821dc012b0ec9046bca Mon Sep 17 00:00:00 2001 From: Shawn Guo Date: Thu, 1 Dec 2011 14:49:29 +0800 Subject: arm/imx: fix irq_base for gpio When gpio core dynamically allocate gpio number for a port, it starts from the end of the total range, 0 ~ ARCH_NR_GPIOS. That said, the earlier a port gets probed, the bigger gpio number it gets assigned. To match this, the irq_base for gpio should be assigned from 'MXC_GPIO_IRQ_START + ARCH_NR_GPIOS' decreasingly. Signed-off-by: Shawn Guo --- arch/arm/mach-imx/mach-imx6q.c | 5 ++--- arch/arm/mach-mx5/imx51-dt.c | 5 ++--- arch/arm/mach-mx5/imx53-dt.c | 5 ++--- 3 files changed, 6 insertions(+), 9 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-imx/mach-imx6q.c b/arch/arm/mach-imx/mach-imx6q.c index eb7531bdfed7..22aa54aa9b2a 100644 --- a/arch/arm/mach-imx/mach-imx6q.c +++ b/arch/arm/mach-imx/mach-imx6q.c @@ -39,11 +39,10 @@ static void __init imx6q_map_io(void) static int __init imx6q_gpio_add_irq_domain(struct device_node *np, struct device_node *interrupt_parent) { - static int gpio_irq_base = MXC_GPIO_IRQ_START + ARCH_NR_GPIOS - - 32 * 7; /* imx6q gets 7 gpio ports */ + static int gpio_irq_base = MXC_GPIO_IRQ_START + ARCH_NR_GPIOS; + gpio_irq_base -= 32; irq_domain_add_simple(np, gpio_irq_base); - gpio_irq_base += 32; return 0; } diff --git a/arch/arm/mach-mx5/imx51-dt.c b/arch/arm/mach-mx5/imx51-dt.c index 3451a463a79a..596edd967dbf 100644 --- a/arch/arm/mach-mx5/imx51-dt.c +++ b/arch/arm/mach-mx5/imx51-dt.c @@ -54,11 +54,10 @@ static int __init imx51_tzic_add_irq_domain(struct device_node *np, static int __init imx51_gpio_add_irq_domain(struct device_node *np, struct device_node *interrupt_parent) { - static int gpio_irq_base = MXC_GPIO_IRQ_START + ARCH_NR_GPIOS - - 32 * 4; /* imx51 gets 4 gpio ports */ + static int gpio_irq_base = MXC_GPIO_IRQ_START + ARCH_NR_GPIOS; + gpio_irq_base -= 32; irq_domain_add_simple(np, gpio_irq_base); - gpio_irq_base += 32; return 0; } diff --git a/arch/arm/mach-mx5/imx53-dt.c b/arch/arm/mach-mx5/imx53-dt.c index 022bc0364b5f..85bfd5ff21b0 100644 --- a/arch/arm/mach-mx5/imx53-dt.c +++ b/arch/arm/mach-mx5/imx53-dt.c @@ -58,11 +58,10 @@ static int __init imx53_tzic_add_irq_domain(struct device_node *np, static int __init imx53_gpio_add_irq_domain(struct device_node *np, struct device_node *interrupt_parent) { - static int gpio_irq_base = MXC_GPIO_IRQ_START + ARCH_NR_GPIOS - - 32 * 7; /* imx53 gets 7 gpio ports */ + static int gpio_irq_base = MXC_GPIO_IRQ_START + ARCH_NR_GPIOS; + gpio_irq_base -= 32; irq_domain_add_simple(np, gpio_irq_base); - gpio_irq_base += 32; return 0; } -- cgit v1.2.1 From 5f894cbb6890d317699aa622b4dc9d73d009cd22 Mon Sep 17 00:00:00 2001 From: Michael Holzheu Date: Thu, 1 Dec 2011 13:32:14 +0100 Subject: [S390] kdump: Replace is_kdump_kernel() with OLDMEM_BASE check In order to have the same behavior for kdump based stand-alone dump as for the kexec method, the is_kdump_kernel() check (only true for the kexec method) has to be replaced by the OLDMEM_BASE check (true for both methods). Signed-off-by: Michael Holzheu Signed-off-by: Martin Schwidefsky --- arch/s390/kernel/setup.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/s390/kernel/setup.c b/arch/s390/kernel/setup.c index e58a462949b1..e54c4ff8abaa 100644 --- a/arch/s390/kernel/setup.c +++ b/arch/s390/kernel/setup.c @@ -579,7 +579,7 @@ static unsigned long __init find_crash_base(unsigned long crash_size, *msg = "first memory chunk must be at least crashkernel size"; return 0; } - if (is_kdump_kernel() && (crash_size == OLDMEM_SIZE)) + if (OLDMEM_BASE && crash_size == OLDMEM_SIZE) return OLDMEM_BASE; for (i = MEMORY_CHUNKS - 1; i >= 0; i--) { -- cgit v1.2.1 From d9ae6772d3a3d7325d535577d9fd09c0de8a9da3 Mon Sep 17 00:00:00 2001 From: Martin Schwidefsky Date: Thu, 1 Dec 2011 13:32:15 +0100 Subject: [S390] ptrace inferior call interactions with TIF_SYSCALL The TIF_SYSCALL bit needs to be cleared if the debugger changes the state of the ptraced process in regard to the presence of a system call. Otherwise the system call will be restarted although the debugger set up an inferior call. Signed-off-by: Martin Schwidefsky --- arch/s390/kernel/signal.c | 8 +++----- 1 file changed, 3 insertions(+), 5 deletions(-) (limited to 'arch') diff --git a/arch/s390/kernel/signal.c b/arch/s390/kernel/signal.c index 05a85bc14c98..7f6f9f354545 100644 --- a/arch/s390/kernel/signal.c +++ b/arch/s390/kernel/signal.c @@ -460,9 +460,9 @@ void do_signal(struct pt_regs *regs) regs->svc_code >> 16); break; } - /* No longer in a system call */ - clear_thread_flag(TIF_SYSCALL); } + /* No longer in a system call */ + clear_thread_flag(TIF_SYSCALL); if ((is_compat_task() ? handle_signal32(signr, &ka, &info, oldset, regs) : @@ -486,6 +486,7 @@ void do_signal(struct pt_regs *regs) } /* No handlers present - check for system call restart */ + clear_thread_flag(TIF_SYSCALL); if (current_thread_info()->system_call) { regs->svc_code = current_thread_info()->system_call; switch (regs->gprs[2]) { @@ -500,9 +501,6 @@ void do_signal(struct pt_regs *regs) regs->gprs[2] = regs->orig_gpr2; set_thread_flag(TIF_SYSCALL); break; - default: - clear_thread_flag(TIF_SYSCALL); - break; } } -- cgit v1.2.1 From 7c81878b34dd1b75dec5c8b68951d1439854d358 Mon Sep 17 00:00:00 2001 From: Carsten Otte Date: Thu, 1 Dec 2011 13:32:16 +0100 Subject: [S390] fix page change underindication in pgste_update_all This patch makes sure we don't underindicate _PAGE_CHANGED in case we have a race between an operation that changes the page and this code path that hits us between page_get_storage_key and page_set_storage_key. Note that we still have a potential underindication on _PAGE_REFERENCED in the unlikely event that the page was changed but not referenced _and_ someone references the page in the race window. That's not considered to be a problem. Signed-off-by: Carsten Otte Signed-off-by: Martin Schwidefsky --- arch/s390/include/asm/pgtable.h | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) (limited to 'arch') diff --git a/arch/s390/include/asm/pgtable.h b/arch/s390/include/asm/pgtable.h index 524d23b8610c..4f289ff0b7fe 100644 --- a/arch/s390/include/asm/pgtable.h +++ b/arch/s390/include/asm/pgtable.h @@ -599,10 +599,10 @@ static inline pgste_t pgste_update_all(pte_t *ptep, pgste_t pgste) skey = page_get_storage_key(address); bits = skey & (_PAGE_CHANGED | _PAGE_REFERENCED); /* Clear page changed & referenced bit in the storage key */ - if (bits) { - skey ^= bits; - page_set_storage_key(address, skey, 1); - } + if (bits & _PAGE_CHANGED) + page_set_storage_key(address, skey ^ bits, 1); + else if (bits) + page_reset_referenced(address); /* Transfer page changed & referenced bit to guest bits in pgste */ pgste_val(pgste) |= bits << 48; /* RCP_GR_BIT & RCP_GC_BIT */ /* Get host changed & referenced bits from pgste */ -- cgit v1.2.1 From b934069c991355d27a053a932591c77960f4e414 Mon Sep 17 00:00:00 2001 From: Martin Schwidefsky Date: Thu, 1 Dec 2011 13:32:17 +0100 Subject: [S390] add missing .set function for NT_S390_LAST_BREAK regset The last breaking event address is a read-only value, the regset misses the .set function. If a PTRACE_SETREGSET is done for NT_S390_LAST_BREAK we get an oops due to a branch to zero: Kernel BUG at 0000000000000002 verbose debug info unavailable illegal operation: 0001 #1 SMP ... Call Trace: (<0000000000158294> ptrace_regset+0x184/0x188) <00000000001595b6> ptrace_request+0x37a/0x4fc <0000000000109a78> arch_ptrace+0x108/0x1fc <00000000001590d6> SyS_ptrace+0xaa/0x12c <00000000005c7a42> sysc_noemu+0x16/0x1c <000003fffd5ec10c> 0x3fffd5ec10c Last Breaking-Event-Address: <0000000000158242> ptrace_regset+0x132/0x188 Add a nop .set function to prevent the branch to zero. Signed-off-by: Martin Schwidefsky Cc: stable@kernel.org --- arch/s390/kernel/ptrace.c | 18 ++++++++++++++++++ 1 file changed, 18 insertions(+) (limited to 'arch') diff --git a/arch/s390/kernel/ptrace.c b/arch/s390/kernel/ptrace.c index 450931a45b68..f05649fd0547 100644 --- a/arch/s390/kernel/ptrace.c +++ b/arch/s390/kernel/ptrace.c @@ -905,6 +905,14 @@ static int s390_last_break_get(struct task_struct *target, return 0; } +static int s390_last_break_set(struct task_struct *target, + const struct user_regset *regset, + unsigned int pos, unsigned int count, + const void *kbuf, const void __user *ubuf) +{ + return 0; +} + #endif static int s390_system_call_get(struct task_struct *target, @@ -951,6 +959,7 @@ static const struct user_regset s390_regsets[] = { .size = sizeof(long), .align = sizeof(long), .get = s390_last_break_get, + .set = s390_last_break_set, }, #endif [REGSET_SYSTEM_CALL] = { @@ -1116,6 +1125,14 @@ static int s390_compat_last_break_get(struct task_struct *target, return 0; } +static int s390_compat_last_break_set(struct task_struct *target, + const struct user_regset *regset, + unsigned int pos, unsigned int count, + const void *kbuf, const void __user *ubuf) +{ + return 0; +} + static const struct user_regset s390_compat_regsets[] = { [REGSET_GENERAL] = { .core_note_type = NT_PRSTATUS, @@ -1139,6 +1156,7 @@ static const struct user_regset s390_compat_regsets[] = { .size = sizeof(long), .align = sizeof(long), .get = s390_compat_last_break_get, + .set = s390_compat_last_break_set, }, [REGSET_SYSTEM_CALL] = { .core_note_type = NT_S390_SYSTEM_CALL, -- cgit v1.2.1 From cfc9066bcd3ab498268e1d075f1556bb5244c0aa Mon Sep 17 00:00:00 2001 From: Martin Schwidefsky Date: Thu, 1 Dec 2011 13:32:18 +0100 Subject: [S390] remove reset of system call restart on psw changes git commit 20b40a794baf3b4b "signal race with restarting system calls" added code to the poke_user/poke_user_compat to reset the system call restart information in the thread-info if the PSW address is changed. The purpose of that change has been to workaround old gdbs that do not know about the REGSET_SYSTEM_CALL. It turned out that this is not a good idea, it makes the behaviour of the debuggee dependent on the order of specific ptrace call, e.g. the REGSET_SYSTEM_CALL register set needs to be written last. And the workaround does not really fix old gdbs, inferior calls on interrupted restarting system calls do not work either way. Signed-off-by: Martin Schwidefsky --- arch/s390/kernel/ptrace.c | 12 ------------ 1 file changed, 12 deletions(-) (limited to 'arch') diff --git a/arch/s390/kernel/ptrace.c b/arch/s390/kernel/ptrace.c index f05649fd0547..573bc29551ef 100644 --- a/arch/s390/kernel/ptrace.c +++ b/arch/s390/kernel/ptrace.c @@ -296,13 +296,6 @@ static int __poke_user(struct task_struct *child, addr_t addr, addr_t data) ((data & PSW_MASK_EA) && !(data & PSW_MASK_BA)))) /* Invalid psw mask. */ return -EINVAL; - if (addr == (addr_t) &dummy->regs.psw.addr) - /* - * The debugger changed the instruction address, - * reset system call restart, see signal.c:do_signal - */ - task_thread_info(child)->system_call = 0; - *(addr_t *)((addr_t) &task_pt_regs(child)->psw + addr) = data; } else if (addr < (addr_t) (&dummy->regs.orig_gpr2)) { @@ -614,11 +607,6 @@ static int __poke_user_compat(struct task_struct *child, /* Transfer 31 bit amode bit to psw mask. */ regs->psw.mask = (regs->psw.mask & ~PSW_MASK_BA) | (__u64)(tmp & PSW32_ADDR_AMODE); - /* - * The debugger changed the instruction address, - * reset system call restart, see signal.c:do_signal - */ - task_thread_info(child)->system_call = 0; } else { /* gpr 0-15 */ *(__u32*)((addr_t) ®s->psw + addr*2 + 4) = tmp; -- cgit v1.2.1 From 650f7a72b8cc235ffe4a0e3eff37954349026721 Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Thu, 1 Dec 2011 17:47:06 -0800 Subject: ARM: OMAP1: Fix reprogramming of DPLL1 for systems that boot at rates below 60MHz Commit e9b7086b80c4d9e354f4edc9e280ae85a60df408 (ARM: OMAP: Fix reprogramming of dpll1 rate) fixed a regression for systems that did not rely on bootloader set rates. However, it also introduced a new problem where the rates selected in .config would not take affect as omap1_select_table_rate currently refuses to reprogram DPLL1 if it's already initialized. This was not a problem earlier, as the reprogramming was done earlier with ck_dpll1_p->rate uninitialized. Fix this by forcing the reprogramming on systems booting at rates below 60MHz. Note that the long term fix is to make the rates SoC specific later on. Thanks for Janusz Krzysztofik for figuring this one out. Reported-by: Janusz Krzysztofik Acked-by: Janusz Krzysztofik Signed-off-by: Tony Lindgren --- arch/arm/mach-omap1/clock_data.c | 3 +++ 1 file changed, 3 insertions(+) (limited to 'arch') diff --git a/arch/arm/mach-omap1/clock_data.c b/arch/arm/mach-omap1/clock_data.c index 1297bb58869c..3f305610efa0 100644 --- a/arch/arm/mach-omap1/clock_data.c +++ b/arch/arm/mach-omap1/clock_data.c @@ -930,6 +930,9 @@ void __init omap1_clk_late_init(void) if (ck_dpll1.rate >= OMAP1_DPLL1_SANE_VALUE) return; + /* System booting at unusable rate, force reprogramming of DPLL1 */ + ck_dpll1_p->rate = 0; + /* Find the highest supported frequency and enable it */ if (omap1_select_table_rate(&virtual_ck_mpu, ~0)) { pr_err("System frequencies not set, using default. Check your config.\n"); -- cgit v1.2.1 From b29e23547ecb2a609777288cd81fc83b01f9f43f Mon Sep 17 00:00:00 2001 From: Janusz Krzysztofik Date: Thu, 1 Dec 2011 21:30:39 +0100 Subject: ARM: OMAP1: Remove unsafe clock values from omap1_defconfig DPLL1 reprogramming to a different rate is actually blocked inside omap1_select_table_rate(), resulting in the defalut rate of 60 MHz always used instead of the one selected in .config. OTOH, in omap1_defconfig we currently rely on Kconfig options for the supported MHz rates in case of boards which boot with dpll1 not set correctly by their boot loaders. This means that before we allow for reprogramming of dpll1 rate, we should remove all unsafe clock selections from omap1_defconfig, otherwise it will stop booting on boards with imperfect boot loaders, as it would always try to change to 216MHz. Keep only one safe clock rate per each supported xtal frequency, i.e. 60MHZ dpll1 for 12MHz xtal and 182MHz dpll1 for 13MHz xtal. BTW, this change goes into the direction of removing all OMAP1 clock rate options, planned for next merge window. Signed-off-by: Janusz Krzysztofik Signed-off-by: Tony Lindgren --- arch/arm/configs/omap1_defconfig | 5 ----- 1 file changed, 5 deletions(-) (limited to 'arch') diff --git a/arch/arm/configs/omap1_defconfig b/arch/arm/configs/omap1_defconfig index a7e777581378..945a34f2a34d 100644 --- a/arch/arm/configs/omap1_defconfig +++ b/arch/arm/configs/omap1_defconfig @@ -48,12 +48,7 @@ CONFIG_MACH_SX1=y CONFIG_MACH_NOKIA770=y CONFIG_MACH_AMS_DELTA=y CONFIG_MACH_OMAP_GENERIC=y -CONFIG_OMAP_ARM_216MHZ=y -CONFIG_OMAP_ARM_195MHZ=y -CONFIG_OMAP_ARM_192MHZ=y CONFIG_OMAP_ARM_182MHZ=y -CONFIG_OMAP_ARM_168MHZ=y -# CONFIG_OMAP_ARM_60MHZ is not set # CONFIG_ARM_THUMB is not set CONFIG_PCCARD=y CONFIG_OMAP_CF=y -- cgit v1.2.1 From c2cb211116192690605eaa70d39deb04241003e2 Mon Sep 17 00:00:00 2001 From: Janusz Krzysztofik Date: Thu, 1 Dec 2011 21:13:01 +0100 Subject: ARM: OMAP1: Fix ckctl value used for dpll1 defualt rate Use the exact value found in omap1_rate_table, otherwise I have been experiencing issues with correct timekeeping on my Amstrad Delta. Signed-off-by: Janusz Krzysztofik [tony@atomide.com: removed comment referencing a development branch] Signed-off-by: Tony Lindgren --- arch/arm/mach-omap1/clock_data.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/mach-omap1/clock_data.c b/arch/arm/mach-omap1/clock_data.c index 3f305610efa0..86b2dec11788 100644 --- a/arch/arm/mach-omap1/clock_data.c +++ b/arch/arm/mach-omap1/clock_data.c @@ -937,7 +937,7 @@ void __init omap1_clk_late_init(void) if (omap1_select_table_rate(&virtual_ck_mpu, ~0)) { pr_err("System frequencies not set, using default. Check your config.\n"); omap_writew(0x2290, DPLL_CTL); - omap_writew(cpu_is_omap7xx() ? 0x3005 : 0x1005, ARM_CKCTL); + omap_writew(cpu_is_omap7xx() ? 0x2005 : 0x0005, ARM_CKCTL); ck_dpll1.rate = OMAP1_DPLL1_SANE_VALUE; } propagate_rate(&ck_dpll1); -- cgit v1.2.1 From 1bdfd27a0bd65ccdd7294c1080bdb59f6a5a6e72 Mon Sep 17 00:00:00 2001 From: Barry Song Date: Thu, 17 Nov 2011 22:18:14 +0800 Subject: ARM: CSR: fix build error due to new mdesc->dma_zone_size commit 98b0124f0e2b88 "ARM: mach-prima2: move ARM_DMA_ZONE_SIZE to mdesc->dma_zone_size" causes building error: arch/arm/mach-prima2/prima2.c:39:19: error: 'SZ_256M' undeclared here (not in a function) Signed-off-by: Barry Song --- arch/arm/mach-prima2/prima2.c | 1 + 1 file changed, 1 insertion(+) (limited to 'arch') diff --git a/arch/arm/mach-prima2/prima2.c b/arch/arm/mach-prima2/prima2.c index ef555c041962..a12b689a8702 100644 --- a/arch/arm/mach-prima2/prima2.c +++ b/arch/arm/mach-prima2/prima2.c @@ -8,6 +8,7 @@ #include #include +#include #include #include #include -- cgit v1.2.1 From b2dcb8723eb61d00c40d526702d08f6d805f5f01 Mon Sep 17 00:00:00 2001 From: Barry Song Date: Thu, 17 Nov 2011 22:27:22 +0800 Subject: ARM: CSR: PM: fix build error due to undeclared 'THIS_MODULE' In the new kernel, we will get the following compile error: arch/arm/mach-prima2/pm.c:141: error: 'THIS_MODULE' undeclared here (not in a function) so include module.h head file explicitly Signed-off-by: Barry Song --- arch/arm/mach-prima2/pm.c | 1 + 1 file changed, 1 insertion(+) (limited to 'arch') diff --git a/arch/arm/mach-prima2/pm.c b/arch/arm/mach-prima2/pm.c index cb53160f6c5d..26ebb57719df 100644 --- a/arch/arm/mach-prima2/pm.c +++ b/arch/arm/mach-prima2/pm.c @@ -9,6 +9,7 @@ #include #include #include +#include #include #include #include -- cgit v1.2.1 From ade145cc4885fbdf47b3abd9cd6baf23b8367fef Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Fri, 2 Dec 2011 14:17:36 +0900 Subject: ARM: S3C64XX: Remove extern from definition of framebuffer setup call The extern is only useful on prototypes. Signed-off-by: Mark Brown Cc: stable@kernel.org Signed-off-by: Kukjin Kim --- arch/arm/mach-s3c64xx/setup-fb-24bpp.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/mach-s3c64xx/setup-fb-24bpp.c b/arch/arm/mach-s3c64xx/setup-fb-24bpp.c index 83d2afb79e9f..2cf80026c58d 100644 --- a/arch/arm/mach-s3c64xx/setup-fb-24bpp.c +++ b/arch/arm/mach-s3c64xx/setup-fb-24bpp.c @@ -20,7 +20,7 @@ #include #include -extern void s3c64xx_fb_gpio_setup_24bpp(void) +void s3c64xx_fb_gpio_setup_24bpp(void) { s3c_gpio_cfgrange_nopull(S3C64XX_GPI(0), 16, S3C_GPIO_SFN(2)); s3c_gpio_cfgrange_nopull(S3C64XX_GPJ(0), 12, S3C_GPIO_SFN(2)); -- cgit v1.2.1 From f4a65ad6eb9b56180724de52ddd6dd6712121be1 Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Fri, 2 Dec 2011 14:17:54 +0900 Subject: ARM: S3C64XX: Add linux/export.h to dev-spi.c This is required for the EXPORT_SYMBOL()s the code uses, previously the header was being included implicitly by another header. Signed-off-by: Mark Brown Signed-off-by: Kukjin Kim --- arch/arm/mach-s3c64xx/dev-spi.c | 1 + 1 file changed, 1 insertion(+) (limited to 'arch') diff --git a/arch/arm/mach-s3c64xx/dev-spi.c b/arch/arm/mach-s3c64xx/dev-spi.c index 5e6b42089eb4..3341fd118723 100644 --- a/arch/arm/mach-s3c64xx/dev-spi.c +++ b/arch/arm/mach-s3c64xx/dev-spi.c @@ -10,6 +10,7 @@ #include #include +#include #include #include #include -- cgit v1.2.1 From 71b33a4f7c864bf5fc893b5ca144770ad05f1d4a Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Fri, 2 Dec 2011 14:18:02 +0900 Subject: ARM: S3C64XX: Staticise s3c6400_sysclass The symbol is not exported and doesn't need to be. Signed-off-by: Mark Brown Cc: stable@kernel.org Signed-off-by: Kukjin Kim --- arch/arm/mach-s3c64xx/s3c6400.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/mach-s3c64xx/s3c6400.c b/arch/arm/mach-s3c64xx/s3c6400.c index 7a3bc32df425..51c00f2453c6 100644 --- a/arch/arm/mach-s3c64xx/s3c6400.c +++ b/arch/arm/mach-s3c64xx/s3c6400.c @@ -70,7 +70,7 @@ void __init s3c6400_init_irq(void) s3c64xx_init_irq(~0 & ~(0xf << 5), ~0); } -struct sysdev_class s3c6400_sysclass = { +static struct sysdev_class s3c6400_sysclass = { .name = "s3c6400-core", }; -- cgit v1.2.1 From 5d348401ed03450395ce674594c1c08c7d85bd8d Mon Sep 17 00:00:00 2001 From: Dong Aisheng Date: Sat, 12 Nov 2011 00:09:05 +0800 Subject: ARM: mxs/tx28: add __initconst for fec pdata MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Signed-off-by: Dong Aisheng Acked-by: Lothar Waßmann Signed-off-by: Shawn Guo --- arch/arm/mach-mxs/module-tx28.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-mxs/module-tx28.c b/arch/arm/mach-mxs/module-tx28.c index 0fcff47009cf..9a7b08b2a925 100644 --- a/arch/arm/mach-mxs/module-tx28.c +++ b/arch/arm/mach-mxs/module-tx28.c @@ -66,11 +66,11 @@ static const iomux_cfg_t tx28_fec1_pads[] __initconst = { MX28_PAD_ENET0_CRS__ENET1_RX_EN, }; -static struct fec_platform_data tx28_fec0_data = { +static const struct fec_platform_data tx28_fec0_data __initconst = { .phy = PHY_INTERFACE_MODE_RMII, }; -static struct fec_platform_data tx28_fec1_data = { +static const struct fec_platform_data tx28_fec1_data __initconst = { .phy = PHY_INTERFACE_MODE_RMII, }; -- cgit v1.2.1 From 8d2d2d1d7e96f12d9fe140169fb39ef9fd27b7c1 Mon Sep 17 00:00:00 2001 From: Lauri Hintsala Date: Mon, 21 Nov 2011 10:55:55 +0200 Subject: ARM: mxs: fix machines' initializers order Initializers of m28evk and stmp378x_devb fixed to be in order they are called. reference: http://article.gmane.org/gmane.linux.ports.arm.omap/50721 Cc: Shawn Guo Signed-off-by: Lauri Hintsala Acked-by: Russell King Signed-off-by: Shawn Guo --- arch/arm/mach-mxs/mach-m28evk.c | 2 +- arch/arm/mach-mxs/mach-stmp378x_devb.c | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-mxs/mach-m28evk.c b/arch/arm/mach-mxs/mach-m28evk.c index 3b1681e4f49a..6b00577b7025 100644 --- a/arch/arm/mach-mxs/mach-m28evk.c +++ b/arch/arm/mach-mxs/mach-m28evk.c @@ -361,6 +361,6 @@ static struct sys_timer m28evk_timer = { MACHINE_START(M28EVK, "DENX M28 EVK") .map_io = mx28_map_io, .init_irq = mx28_init_irq, - .init_machine = m28evk_init, .timer = &m28evk_timer, + .init_machine = m28evk_init, MACHINE_END diff --git a/arch/arm/mach-mxs/mach-stmp378x_devb.c b/arch/arm/mach-mxs/mach-stmp378x_devb.c index 177e53123a02..6834dea38c04 100644 --- a/arch/arm/mach-mxs/mach-stmp378x_devb.c +++ b/arch/arm/mach-mxs/mach-stmp378x_devb.c @@ -115,6 +115,6 @@ static struct sys_timer stmp378x_dvb_timer = { MACHINE_START(STMP378X, "STMP378X") .map_io = mx23_map_io, .init_irq = mx23_init_irq, - .init_machine = stmp378x_dvb_init, .timer = &stmp378x_dvb_timer, + .init_machine = stmp378x_dvb_init, MACHINE_END -- cgit v1.2.1 From 11357be9246c7d1acf9b37ad54a18b29bbb734be Mon Sep 17 00:00:00 2001 From: Wolfram Sang Date: Sat, 26 Nov 2011 11:39:14 +0100 Subject: arm: mx23: recognise stmp378x as mx23 Adding the machine_is_* line was forgotten when converting mach-stmp378x to mach-mxs. Signed-off-by: Wolfram Sang Signed-off-by: Shawn Guo Cc: stable@kernel.org --- arch/arm/mach-mxs/include/mach/mxs.h | 1 + 1 file changed, 1 insertion(+) (limited to 'arch') diff --git a/arch/arm/mach-mxs/include/mach/mxs.h b/arch/arm/mach-mxs/include/mach/mxs.h index 0d2d2b470998..bde5f6634747 100644 --- a/arch/arm/mach-mxs/include/mach/mxs.h +++ b/arch/arm/mach-mxs/include/mach/mxs.h @@ -30,6 +30,7 @@ */ #define cpu_is_mx23() ( \ machine_is_mx23evk() || \ + machine_is_stmp378x() || \ 0) #define cpu_is_mx28() ( \ machine_is_mx28evk() || \ -- cgit v1.2.1 From 7d8b894ca135a896f32934f7d096714d5bc687e6 Mon Sep 17 00:00:00 2001 From: Peter Rusko Date: Wed, 30 Nov 2011 16:43:27 +0100 Subject: ARM: mx28: LRADC macro rename It's a correction of two macro names, renaming them from IRADC to LRADC. Signed-off-by: Peter Rusko Acked-by: Wolfram Sang Signed-off-by: Shawn Guo --- arch/arm/mach-mxs/include/mach/mx28.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-mxs/include/mach/mx28.h b/arch/arm/mach-mxs/include/mach/mx28.h index 75d86118b76a..30c7990f3c01 100644 --- a/arch/arm/mach-mxs/include/mach/mx28.h +++ b/arch/arm/mach-mxs/include/mach/mx28.h @@ -104,8 +104,8 @@ #define MX28_INT_CAN1 9 #define MX28_INT_LRADC_TOUCH 10 #define MX28_INT_HSADC 13 -#define MX28_INT_IRADC_THRESH0 14 -#define MX28_INT_IRADC_THRESH1 15 +#define MX28_INT_LRADC_THRESH0 14 +#define MX28_INT_LRADC_THRESH1 15 #define MX28_INT_LRADC_CH0 16 #define MX28_INT_LRADC_CH1 17 #define MX28_INT_LRADC_CH2 18 -- cgit v1.2.1 From e5fd47bfab2df0c2184cc0bf4245d8e1bb7724fb Mon Sep 17 00:00:00 2001 From: Konrad Rzeszutek Wilk Date: Mon, 21 Nov 2011 18:02:02 -0500 Subject: xen/pm_idle: Make pm_idle be default_idle under Xen. The idea behind commit d91ee5863b71 ("cpuidle: replace xen access to x86 pm_idle and default_idle") was to have one call - disable_cpuidle() which would make pm_idle not be molested by other code. It disallows cpuidle_idle_call to be set to pm_idle (which is excellent). But in the select_idle_routine() and idle_setup(), the pm_idle can still be set to either: amd_e400_idle, mwait_idle or default_idle. This depends on some CPU flags (MWAIT) and in AMD case on the type of CPU. In case of mwait_idle we can hit some instances where the hypervisor (Amazon EC2 specifically) sets the MWAIT and we get: Brought up 2 CPUs invalid opcode: 0000 [#1] SMP Pid: 0, comm: swapper Not tainted 3.1.0-0.rc6.git0.3.fc16.x86_64 #1 RIP: e030:[] [] mwait_idle+0x6f/0xb4 ... Call Trace: [] cpu_idle+0xae/0xe8 [] cpu_bringup_and_idle+0xe/0x10 RIP [] mwait_idle+0x6f/0xb4 RSP In the case of amd_e400_idle we don't get so spectacular crashes, but we do end up making an MSR which is trapped in the hypervisor, and then follow it up with a yield hypercall. Meaning we end up going to hypervisor twice instead of just once. The previous behavior before v3.0 was that pm_idle was set to default_idle regardless of select_idle_routine/idle_setup. We want to do that, but only for one specific case: Xen. This patch does that. Fixes RH BZ #739499 and Ubuntu #881076 Reported-by: Stefan Bader Signed-off-by: Konrad Rzeszutek Wilk Signed-off-by: Linus Torvalds --- arch/x86/include/asm/system.h | 1 + arch/x86/kernel/process.c | 8 ++++++++ arch/x86/xen/setup.c | 2 +- 3 files changed, 10 insertions(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/x86/include/asm/system.h b/arch/x86/include/asm/system.h index c2ff2a1d845e..2d2f01ce6dcb 100644 --- a/arch/x86/include/asm/system.h +++ b/arch/x86/include/asm/system.h @@ -401,6 +401,7 @@ extern unsigned long arch_align_stack(unsigned long sp); extern void free_init_pages(char *what, unsigned long begin, unsigned long end); void default_idle(void); +bool set_pm_idle_to_default(void); void stop_this_cpu(void *dummy); diff --git a/arch/x86/kernel/process.c b/arch/x86/kernel/process.c index b9b3b1a51643..ee5d4fbd53b4 100644 --- a/arch/x86/kernel/process.c +++ b/arch/x86/kernel/process.c @@ -403,6 +403,14 @@ void default_idle(void) EXPORT_SYMBOL(default_idle); #endif +bool set_pm_idle_to_default(void) +{ + bool ret = !!pm_idle; + + pm_idle = default_idle; + + return ret; +} void stop_this_cpu(void *dummy) { local_irq_disable(); diff --git a/arch/x86/xen/setup.c b/arch/x86/xen/setup.c index 38d0af4fefec..1093f80c162d 100644 --- a/arch/x86/xen/setup.c +++ b/arch/x86/xen/setup.c @@ -410,6 +410,6 @@ void __init xen_arch_setup(void) #endif disable_cpuidle(); boot_option_idle_override = IDLE_HALT; - + WARN_ON(set_pm_idle_to_default()); fiddle_vdso(); } -- cgit v1.2.1 From 3989efb77046ad334518b6cddcf817184affe7c9 Mon Sep 17 00:00:00 2001 From: Chris Metcalf Date: Thu, 1 Dec 2011 11:37:20 -0500 Subject: arch/tile: add a few #includes and an EXPORT to catch up with kernel changes. The empty_zero_page[] export is required for ZERO_PAGE() module references. The #includes are due to changes in implicit inclusion, and should of course have been in the sources from the beginning. Signed-off-by: Chris Metcalf --- arch/tile/kernel/pci-dma.c | 1 + arch/tile/kernel/pci.c | 1 + arch/tile/kernel/sysfs.c | 1 + arch/tile/lib/exports.c | 3 +++ 4 files changed, 6 insertions(+) (limited to 'arch') diff --git a/arch/tile/kernel/pci-dma.c b/arch/tile/kernel/pci-dma.c index 658f2ce426a4..b3ed19f8779c 100644 --- a/arch/tile/kernel/pci-dma.c +++ b/arch/tile/kernel/pci-dma.c @@ -15,6 +15,7 @@ #include #include #include +#include #include #include diff --git a/arch/tile/kernel/pci.c b/arch/tile/kernel/pci.c index 2a8014cb1ff5..9d610d3fb11e 100644 --- a/arch/tile/kernel/pci.c +++ b/arch/tile/kernel/pci.c @@ -24,6 +24,7 @@ #include #include #include +#include #include #include diff --git a/arch/tile/kernel/sysfs.c b/arch/tile/kernel/sysfs.c index b671a86f4515..602908268093 100644 --- a/arch/tile/kernel/sysfs.c +++ b/arch/tile/kernel/sysfs.c @@ -18,6 +18,7 @@ #include #include #include +#include #include /* Return a string queried from the hypervisor, truncated to page size. */ diff --git a/arch/tile/lib/exports.c b/arch/tile/lib/exports.c index a87d2a859ba9..2a81d32de0da 100644 --- a/arch/tile/lib/exports.c +++ b/arch/tile/lib/exports.c @@ -39,6 +39,9 @@ EXPORT_SYMBOL(finv_user_asm); EXPORT_SYMBOL(current_text_addr); EXPORT_SYMBOL(dump_stack); +/* arch/tile/kernel/head.S */ +EXPORT_SYMBOL(empty_zero_page); + /* arch/tile/lib/, various memcpy files */ EXPORT_SYMBOL(memcpy); EXPORT_SYMBOL(__copy_to_user_inatomic); -- cgit v1.2.1 From c2851a9b1caa420c2cdbd517617166990e3723c0 Mon Sep 17 00:00:00 2001 From: Chris Metcalf Date: Thu, 1 Dec 2011 12:51:05 -0500 Subject: arch/tile: fix double-free bug in homecache_free_pages() When freeing the page with this API, the page was "put" twice. This was only discovered bringing up an MPT fusion controller, which actually used the API; it hadn't been invoked previously, so the bug had gone unnoticed. Signed-off-by: Chris Metcalf --- arch/tile/mm/homecache.c | 9 ++++++--- 1 file changed, 6 insertions(+), 3 deletions(-) (limited to 'arch') diff --git a/arch/tile/mm/homecache.c b/arch/tile/mm/homecache.c index cbe6f4f9eca3..1cc6ae477c98 100644 --- a/arch/tile/mm/homecache.c +++ b/arch/tile/mm/homecache.c @@ -449,9 +449,12 @@ void homecache_free_pages(unsigned long addr, unsigned int order) VM_BUG_ON(!virt_addr_valid((void *)addr)); page = virt_to_page((void *)addr); if (put_page_testzero(page)) { - int pages = (1 << order); homecache_change_page_home(page, order, initial_page_home()); - while (pages--) - __free_page(page++); + if (order == 0) { + free_hot_cold_page(page, 0); + } else { + init_page_count(page); + __free_pages(page, order); + } } } -- cgit v1.2.1 From 0c90547b4a3fcee184db4d54ffc1a4fb17fd54d6 Mon Sep 17 00:00:00 2001 From: Chris Metcalf Date: Thu, 1 Dec 2011 12:58:19 -0500 Subject: arch/tile: use new generic {enable,disable}_percpu_irq() routines We provided very similar routines internally, but now we can hook into the generic framework by supplying our routines as function pointers in the irq_chip structure instead. Signed-off-by: Chris Metcalf --- arch/tile/include/asm/irq.h | 10 ---------- arch/tile/kernel/irq.c | 16 ++++++++-------- 2 files changed, 8 insertions(+), 18 deletions(-) (limited to 'arch') diff --git a/arch/tile/include/asm/irq.h b/arch/tile/include/asm/irq.h index 94e9a511de84..f80f8ceabc67 100644 --- a/arch/tile/include/asm/irq.h +++ b/arch/tile/include/asm/irq.h @@ -74,16 +74,6 @@ enum { */ void tile_irq_activate(unsigned int irq, int tile_irq_type); -/* - * For onboard, non-PCI (e.g. TILE_IRQ_PERCPU) devices, drivers know - * how to use enable/disable_percpu_irq() to manage interrupts on each - * core. We can't use the generic enable/disable_irq() because they - * use a single reference count per irq, rather than per cpu per irq. - */ -void enable_percpu_irq(unsigned int irq); -void disable_percpu_irq(unsigned int irq); - - void setup_irq_regs(void); #endif /* _ASM_TILE_IRQ_H */ diff --git a/arch/tile/kernel/irq.c b/arch/tile/kernel/irq.c index aa0134db2dd6..02e628065012 100644 --- a/arch/tile/kernel/irq.c +++ b/arch/tile/kernel/irq.c @@ -152,14 +152,13 @@ void tile_dev_intr(struct pt_regs *regs, int intnum) * Remove an irq from the disabled mask. If we're in an interrupt * context, defer enabling the HW interrupt until we leave. */ -void enable_percpu_irq(unsigned int irq) +static void tile_irq_chip_enable(struct irq_data *d) { - get_cpu_var(irq_disable_mask) &= ~(1UL << irq); + get_cpu_var(irq_disable_mask) &= ~(1UL << d->irq); if (__get_cpu_var(irq_depth) == 0) - unmask_irqs(1UL << irq); + unmask_irqs(1UL << d->irq); put_cpu_var(irq_disable_mask); } -EXPORT_SYMBOL(enable_percpu_irq); /* * Add an irq to the disabled mask. We disable the HW interrupt @@ -167,13 +166,12 @@ EXPORT_SYMBOL(enable_percpu_irq); * in an interrupt context, the return path is careful to avoid * unmasking a newly disabled interrupt. */ -void disable_percpu_irq(unsigned int irq) +static void tile_irq_chip_disable(struct irq_data *d) { - get_cpu_var(irq_disable_mask) |= (1UL << irq); - mask_irqs(1UL << irq); + get_cpu_var(irq_disable_mask) |= (1UL << d->irq); + mask_irqs(1UL << d->irq); put_cpu_var(irq_disable_mask); } -EXPORT_SYMBOL(disable_percpu_irq); /* Mask an interrupt. */ static void tile_irq_chip_mask(struct irq_data *d) @@ -209,6 +207,8 @@ static void tile_irq_chip_eoi(struct irq_data *d) static struct irq_chip tile_irq_chip = { .name = "tile_irq_chip", + .irq_enable = tile_irq_chip_enable, + .irq_disable = tile_irq_chip_disable, .irq_ack = tile_irq_chip_ack, .irq_eoi = tile_irq_chip_eoi, .irq_mask = tile_irq_chip_mask, -- cgit v1.2.1 From f0a4cf31017ac8179a2fe295c1bd8e821d7674f4 Mon Sep 17 00:00:00 2001 From: Thomas Meyer Date: Thu, 17 Nov 2011 12:43:40 +0000 Subject: sparc: Use kmemdup rather than duplicating its implementation The semantic patch that makes this change is available in scripts/coccinelle/api/memdup.cocci. Signed-off-by: Thomas Meyer Signed-off-by: David S. Miller --- arch/sparc/kernel/ds.c | 6 ++---- arch/sparc/kernel/prom_common.c | 4 +--- 2 files changed, 3 insertions(+), 7 deletions(-) (limited to 'arch') diff --git a/arch/sparc/kernel/ds.c b/arch/sparc/kernel/ds.c index 7429b47c3aca..381edcd5bc29 100644 --- a/arch/sparc/kernel/ds.c +++ b/arch/sparc/kernel/ds.c @@ -1181,13 +1181,11 @@ static int __devinit ds_probe(struct vio_dev *vdev, dp->rcv_buf_len = 4096; - dp->ds_states = kzalloc(sizeof(ds_states_template), - GFP_KERNEL); + dp->ds_states = kmemdup(ds_states_template, + sizeof(ds_states_template), GFP_KERNEL); if (!dp->ds_states) goto out_free_rcv_buf; - memcpy(dp->ds_states, ds_states_template, - sizeof(ds_states_template)); dp->num_ds_states = ARRAY_SIZE(ds_states_template); for (i = 0; i < dp->num_ds_states; i++) diff --git a/arch/sparc/kernel/prom_common.c b/arch/sparc/kernel/prom_common.c index 46614807a57f..741df916c124 100644 --- a/arch/sparc/kernel/prom_common.c +++ b/arch/sparc/kernel/prom_common.c @@ -58,12 +58,10 @@ int of_set_property(struct device_node *dp, const char *name, void *val, int len void *new_val; int err; - new_val = kmalloc(len, GFP_KERNEL); + new_val = kmemdup(val, len, GFP_KERNEL); if (!new_val) return -ENOMEM; - memcpy(new_val, val, len); - err = -ENODEV; mutex_lock(&of_set_property_mutex); -- cgit v1.2.1 From 8e8da023f5af71662867729db5547dc54786093c Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Sun, 4 Dec 2011 11:57:09 -0800 Subject: x86: Fix boot failures on older AMD CPU's People with old AMD chips are getting hung boots, because commit bcb80e53877c ("x86, microcode, AMD: Add microcode revision to /proc/cpuinfo") moved the microcode detection too early into "early_init_amd()". At that point we are *so* early in the booth that the exception tables haven't even been set up yet, so the whole rdmsr_safe(MSR_AMD64_PATCH_LEVEL, &c->microcode, &dummy); doesn't actually work: if the rdmsr does a GP fault (due to non-existant MSR register on older CPU's), we can't fix it up yet, and the boot fails. Fix it by simply moving the code to a slightly later point in the boot (init_amd() instead of early_init_amd()), since the kernel itself doesn't even really care about the microcode patchlevel at this point (or really ever: it's made available to user space in /proc/cpuinfo, and updated if you do a microcode load). Reported-tested-and-bisected-by: Larry Finger Tested-by: Bob Tracy Acked-by: Borislav Petkov Cc: Ingo Molnar Cc: Srivatsa S. Bhat Signed-off-by: Linus Torvalds --- arch/x86/kernel/cpu/amd.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) (limited to 'arch') diff --git a/arch/x86/kernel/cpu/amd.c b/arch/x86/kernel/cpu/amd.c index c7e46cb35327..0bab2b18bb20 100644 --- a/arch/x86/kernel/cpu/amd.c +++ b/arch/x86/kernel/cpu/amd.c @@ -442,8 +442,6 @@ static void __cpuinit bsp_init_amd(struct cpuinfo_x86 *c) static void __cpuinit early_init_amd(struct cpuinfo_x86 *c) { - u32 dummy; - early_init_amd_mc(c); /* @@ -473,12 +471,12 @@ static void __cpuinit early_init_amd(struct cpuinfo_x86 *c) set_cpu_cap(c, X86_FEATURE_EXTD_APICID); } #endif - - rdmsr_safe(MSR_AMD64_PATCH_LEVEL, &c->microcode, &dummy); } static void __cpuinit init_amd(struct cpuinfo_x86 *c) { + u32 dummy; + #ifdef CONFIG_SMP unsigned long long value; @@ -657,6 +655,8 @@ static void __cpuinit init_amd(struct cpuinfo_x86 *c) checking_wrmsrl(MSR_AMD64_MCx_MASK(4), mask); } } + + rdmsr_safe(MSR_AMD64_PATCH_LEVEL, &c->microcode, &dummy); } #ifdef CONFIG_X86_32 -- cgit v1.2.1 From 6a600a8b8749566a7d81ad75dcb8bf5342b5a39a Mon Sep 17 00:00:00 2001 From: Peter Zijlstra Date: Tue, 15 Nov 2011 10:51:15 +0100 Subject: perf, x86: Disable PEBS on SandyBridge chips Cc: Stephane Eranian Cc: stable@kernel.org Signed-off-by: Peter Zijlstra Signed-off-by: Ingo Molnar --- arch/x86/kernel/cpu/perf_event_intel.c | 8 ++++++++ 1 file changed, 8 insertions(+) (limited to 'arch') diff --git a/arch/x86/kernel/cpu/perf_event_intel.c b/arch/x86/kernel/cpu/perf_event_intel.c index 2be5ebe99872..8d601b18bf9f 100644 --- a/arch/x86/kernel/cpu/perf_event_intel.c +++ b/arch/x86/kernel/cpu/perf_event_intel.c @@ -1545,6 +1545,13 @@ static void intel_clovertown_quirks(void) x86_pmu.pebs_constraints = NULL; } +static void intel_sandybridge_quirks(void) +{ + printk(KERN_WARNING "PEBS disabled due to CPU errata.\n"); + x86_pmu.pebs = 0; + x86_pmu.pebs_constraints = NULL; +} + __init int intel_pmu_init(void) { union cpuid10_edx edx; @@ -1694,6 +1701,7 @@ __init int intel_pmu_init(void) break; case 42: /* SandyBridge */ + x86_pmu.quirks = intel_sandybridge_quirks; case 45: /* SandyBridge, "Romely-EP" */ memcpy(hw_cache_event_ids, snb_hw_cache_event_ids, sizeof(hw_cache_event_ids)); -- cgit v1.2.1 From 16e5294e5f8303756a179cf218e37dfb9ed34417 Mon Sep 17 00:00:00 2001 From: Robert Richter Date: Tue, 8 Nov 2011 19:20:44 +0100 Subject: perf, x86: Force IBS LVT offset assignment for family 10h On AMD family 10h we see firmware bug messages like the following: [Firmware Bug]: cpu 6, try to use APIC500 (LVT offset 0) for vector 0x10400, but the register is already in use for vector 0xf9 on another cpu [Firmware Bug]: cpu 6, IBS interrupt offset 0 not available (MSRC001103A=0x0000000000000100) [Firmware Bug]: using offset 1 for IBS interrupts [Firmware Bug]: workaround enabled for IBS LVT offset perf: AMD IBS detected (0x00000007) We always see this, since the offsets are not assigned by the BIOS for this family. Force LVT offset assignment in this case. If the OS assignment fails, fallback to BIOS settings and try to setup this. The fallback to BIOS settings weakens the family check since force_ibs_eilvt_setup() may fail e.g. in case of virtual machines. But setup may still succeed if BIOS offsets are correct. Other families don't have a workaround implemented that assigns LVT offsets. It's ok, to drop calling force_ibs_eilvt_setup() for that families. With the patch the [Firmware Bug] messages vanish. We see now: IBS: LVT offset 1 assigned perf: AMD IBS detected (0x00000007) Signed-off-by: Robert Richter Signed-off-by: Peter Zijlstra Link: http://lkml.kernel.org/r/20111109162225.GO12451@erda.amd.com Signed-off-by: Ingo Molnar --- arch/x86/kernel/cpu/perf_event_amd_ibs.c | 29 ++++++++++++++++++----------- 1 file changed, 18 insertions(+), 11 deletions(-) (limited to 'arch') diff --git a/arch/x86/kernel/cpu/perf_event_amd_ibs.c b/arch/x86/kernel/cpu/perf_event_amd_ibs.c index ab6343d21825..3b8a2d30d14e 100644 --- a/arch/x86/kernel/cpu/perf_event_amd_ibs.c +++ b/arch/x86/kernel/cpu/perf_event_amd_ibs.c @@ -199,8 +199,7 @@ static int force_ibs_eilvt_setup(void) goto out; } - pr_err(FW_BUG "using offset %d for IBS interrupts\n", offset); - pr_err(FW_BUG "workaround enabled for IBS LVT offset\n"); + pr_info("IBS: LVT offset %d assigned\n", offset); return 0; out: @@ -265,19 +264,23 @@ perf_ibs_cpu_notifier(struct notifier_block *self, unsigned long action, void *h static __init int amd_ibs_init(void) { u32 caps; - int ret; + int ret = -EINVAL; caps = __get_ibs_caps(); if (!caps) return -ENODEV; /* ibs not supported by the cpu */ - if (!ibs_eilvt_valid()) { - ret = force_ibs_eilvt_setup(); - if (ret) { - pr_err("Failed to setup IBS, %d\n", ret); - return ret; - } - } + /* + * Force LVT offset assignment for family 10h: The offsets are + * not assigned by the BIOS for this family, so the OS is + * responsible for doing it. If the OS assignment fails, fall + * back to BIOS settings and try to setup this. + */ + if (boot_cpu_data.x86 == 0x10) + force_ibs_eilvt_setup(); + + if (!ibs_eilvt_valid()) + goto out; get_online_cpus(); ibs_caps = caps; @@ -287,7 +290,11 @@ static __init int amd_ibs_init(void) smp_call_function(setup_APIC_ibs, NULL, 1); put_online_cpus(); - return perf_event_ibs_init(); + ret = perf_event_ibs_init(); +out: + if (ret) + pr_err("Failed to setup IBS, %d\n", ret); + return ret; } /* Since we need the pci subsystem to init ibs we can't do this earlier: */ -- cgit v1.2.1 From 69682b625a043b567873e6cda397969b502f0054 Mon Sep 17 00:00:00 2001 From: Mitsuo Hayasaka Date: Tue, 29 Nov 2011 15:08:21 +0900 Subject: x86: Add user_mode_vm check in stack_overflow_check The kernel stack overflow is checked in stack_overflow_check(), which may wrongly detect the overflow if the stack pointer in user space points to the kernel stack intentionally or accidentally. So, the actual overflow is never detected after this misdetection because WARN_ONCE() is used on the detection of it. This patch adds user-mode-vm checking before it to avoid this problem and bails out early if the user stack is used. Signed-off-by: Mitsuo Hayasaka Cc: yrl.pp-manager.tt@hitachi.com Cc: Randy Dunlap Link: http://lkml.kernel.org/r/20111129060821.11076.55315.stgit@ltc219.sdl.hitachi.co.jp Signed-off-by: Ingo Molnar Cc: "H. Peter Anvin" --- arch/x86/kernel/irq_64.c | 3 +++ 1 file changed, 3 insertions(+) (limited to 'arch') diff --git a/arch/x86/kernel/irq_64.c b/arch/x86/kernel/irq_64.c index acf8fbf8fbda..69bca468c47a 100644 --- a/arch/x86/kernel/irq_64.c +++ b/arch/x86/kernel/irq_64.c @@ -38,6 +38,9 @@ static inline void stack_overflow_check(struct pt_regs *regs) #ifdef CONFIG_DEBUG_STACKOVERFLOW u64 curbase = (u64)task_stack_page(current); + if (user_mode_vm(regs)) + return; + WARN_ONCE(regs->sp >= curbase && regs->sp <= curbase + THREAD_SIZE && regs->sp < curbase + sizeof(struct thread_info) + -- cgit v1.2.1 From b495e039b4ce2ce4a96b3006004faf082f4d50e2 Mon Sep 17 00:00:00 2001 From: Jack Steiner Date: Tue, 29 Nov 2011 15:00:58 -0600 Subject: x86, UV: Fix UV2 hub part number There was a mixup when the SGI UV2 hub chip was sent to be fabricated, and it ended up with the wrong part number in the HRP_NODE_ID mmr. Future versions of the chip will (may) have the correct part number. Change the UV infrastructure to recognize both part numbers as valid IDs of a UV2 hub chip. Signed-off-by: Jack Steiner Link: http://lkml.kernel.org/r/20111129210058.GA20452@sgi.com Signed-off-by: Ingo Molnar --- arch/x86/include/asm/uv/uv_mmrs.h | 1 + arch/x86/kernel/apic/x2apic_uv_x.c | 2 ++ 2 files changed, 3 insertions(+) (limited to 'arch') diff --git a/arch/x86/include/asm/uv/uv_mmrs.h b/arch/x86/include/asm/uv/uv_mmrs.h index 10474fb1185d..cf1d73643f60 100644 --- a/arch/x86/include/asm/uv/uv_mmrs.h +++ b/arch/x86/include/asm/uv/uv_mmrs.h @@ -57,6 +57,7 @@ #define UV1_HUB_PART_NUMBER 0x88a5 #define UV2_HUB_PART_NUMBER 0x8eb8 +#define UV2_HUB_PART_NUMBER_X 0x1111 /* Compat: if this #define is present, UV headers support UV2 */ #define UV2_HUB_IS_SUPPORTED 1 diff --git a/arch/x86/kernel/apic/x2apic_uv_x.c b/arch/x86/kernel/apic/x2apic_uv_x.c index 62ae3001ae02..9d59bbacd4e3 100644 --- a/arch/x86/kernel/apic/x2apic_uv_x.c +++ b/arch/x86/kernel/apic/x2apic_uv_x.c @@ -93,6 +93,8 @@ static int __init early_get_pnodeid(void) if (node_id.s.part_number == UV2_HUB_PART_NUMBER) uv_min_hub_revision_id += UV2_HUB_REVISION_BASE - 1; + if (node_id.s.part_number == UV2_HUB_PART_NUMBER_X) + uv_min_hub_revision_id += UV2_HUB_REVISION_BASE - 1; uv_hub_info->hub_revision = uv_min_hub_revision_id; pnode = (node_id.s.node_id >> 1) & ((1 << m_n_config.s.n_skt) - 1); -- cgit v1.2.1 From 8f9a0981aca6bd454ef2a4bdac510af0f6e55bd4 Mon Sep 17 00:00:00 2001 From: Murali Karicheri Date: Tue, 15 Nov 2011 01:42:06 +0530 Subject: ARM: davinci: psc: fix incorrect mask There are 5 LSB bits defined in PDSTAT and the code currently uses a mask of 1 bit to check the status. Use a proper mask per the hardware specification. While at it, use a #define for the mask to improve readability. Reviewed-by: Sergei Shtylyov Signed-off-by: Murali Karicheri Signed-off-by: Sekhar Nori --- arch/arm/mach-davinci/include/mach/psc.h | 1 + arch/arm/mach-davinci/psc.c | 2 +- 2 files changed, 2 insertions(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/mach-davinci/include/mach/psc.h b/arch/arm/mach-davinci/include/mach/psc.h index fa59c097223d..8bf279a88b4b 100644 --- a/arch/arm/mach-davinci/include/mach/psc.h +++ b/arch/arm/mach-davinci/include/mach/psc.h @@ -244,6 +244,7 @@ #define PSC_STATE_ENABLE 3 #define MDSTAT_STATE_MASK 0x3f +#define PDSTAT_STATE_MASK 0x1f #define MDCTL_FORCE BIT(31) #ifndef __ASSEMBLER__ diff --git a/arch/arm/mach-davinci/psc.c b/arch/arm/mach-davinci/psc.c index 1fb6bdff38c1..a0e17707c981 100644 --- a/arch/arm/mach-davinci/psc.c +++ b/arch/arm/mach-davinci/psc.c @@ -80,7 +80,7 @@ void davinci_psc_config(unsigned int domain, unsigned int ctlr, __raw_writel(mdctl, psc_base + MDCTL + 4 * id); pdstat = __raw_readl(psc_base + PDSTAT); - if ((pdstat & 0x00000001) == 0) { + if ((pdstat & PDSTAT_STATE_MASK) == 0) { pdctl1 = __raw_readl(psc_base + PDCTL1); pdctl1 |= 0x1; __raw_writel(pdctl1, psc_base + PDCTL1); -- cgit v1.2.1 From 78b838252fa986f66c7ec8047726ea500a08d98f Mon Sep 17 00:00:00 2001 From: Murali Karicheri Date: Tue, 15 Nov 2011 01:42:07 +0530 Subject: ARM: davinci: psc: fix incorrect offsets Seperate PDSTAT and PDCTL registers are defined for domain 0 and domain 1 where as the code always reads the domain 0 PDSTAT register and domain 1 PDCTL register. Fix this issue. While at it, introduce usage of macros for register masks to improve readability. Reviewed-by: Sergei Shtylyov Signed-off-by: Murali Karicheri Signed-off-by: Sekhar Nori --- arch/arm/mach-davinci/include/mach/psc.h | 4 +++- arch/arm/mach-davinci/psc.c | 16 ++++++++-------- 2 files changed, 11 insertions(+), 9 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-davinci/include/mach/psc.h b/arch/arm/mach-davinci/include/mach/psc.h index 8bf279a88b4b..8bc3fc256171 100644 --- a/arch/arm/mach-davinci/include/mach/psc.h +++ b/arch/arm/mach-davinci/include/mach/psc.h @@ -233,7 +233,7 @@ #define PTCMD 0x120 #define PTSTAT 0x128 #define PDSTAT 0x200 -#define PDCTL1 0x304 +#define PDCTL 0x300 #define MDSTAT 0x800 #define MDCTL 0xA00 @@ -246,6 +246,8 @@ #define MDSTAT_STATE_MASK 0x3f #define PDSTAT_STATE_MASK 0x1f #define MDCTL_FORCE BIT(31) +#define PDCTL_NEXT BIT(1) +#define PDCTL_EPCGOOD BIT(8) #ifndef __ASSEMBLER__ diff --git a/arch/arm/mach-davinci/psc.c b/arch/arm/mach-davinci/psc.c index a0e17707c981..d7e210f4b55c 100644 --- a/arch/arm/mach-davinci/psc.c +++ b/arch/arm/mach-davinci/psc.c @@ -52,7 +52,7 @@ int __init davinci_psc_is_clk_active(unsigned int ctlr, unsigned int id) void davinci_psc_config(unsigned int domain, unsigned int ctlr, unsigned int id, bool enable, u32 flags) { - u32 epcpr, ptcmd, ptstat, pdstat, pdctl1, mdstat, mdctl; + u32 epcpr, ptcmd, ptstat, pdstat, pdctl, mdstat, mdctl; void __iomem *psc_base; struct davinci_soc_info *soc_info = &davinci_soc_info; u32 next_state = PSC_STATE_ENABLE; @@ -79,11 +79,11 @@ void davinci_psc_config(unsigned int domain, unsigned int ctlr, mdctl |= MDCTL_FORCE; __raw_writel(mdctl, psc_base + MDCTL + 4 * id); - pdstat = __raw_readl(psc_base + PDSTAT); + pdstat = __raw_readl(psc_base + PDSTAT + 4 * domain); if ((pdstat & PDSTAT_STATE_MASK) == 0) { - pdctl1 = __raw_readl(psc_base + PDCTL1); - pdctl1 |= 0x1; - __raw_writel(pdctl1, psc_base + PDCTL1); + pdctl = __raw_readl(psc_base + PDCTL + 4 * domain); + pdctl |= PDCTL_NEXT; + __raw_writel(pdctl, psc_base + PDCTL + 4 * domain); ptcmd = 1 << domain; __raw_writel(ptcmd, psc_base + PTCMD); @@ -92,9 +92,9 @@ void davinci_psc_config(unsigned int domain, unsigned int ctlr, epcpr = __raw_readl(psc_base + EPCPR); } while ((((epcpr >> domain) & 1) == 0)); - pdctl1 = __raw_readl(psc_base + PDCTL1); - pdctl1 |= 0x100; - __raw_writel(pdctl1, psc_base + PDCTL1); + pdctl = __raw_readl(psc_base + PDCTL + 4 * domain); + pdctl |= PDCTL_EPCGOOD; + __raw_writel(pdctl, psc_base + PDCTL + 4 * domain); } else { ptcmd = 1 << domain; __raw_writel(ptcmd, psc_base + PTCMD); -- cgit v1.2.1 From 9ab409e402cbfde11e2516be43921954db480f4d Mon Sep 17 00:00:00 2001 From: Sekhar Nori Date: Tue, 15 Nov 2011 01:42:08 +0530 Subject: ARM: davinci: dm646x does not have a DSP domain Fix the incorrect classification of DSP clock into a seperate DSP domain on DM646x. Per the reference guide (http://www.ti.com/lit/ug/spruep9e/spruep9e.pdf) there is only one "AlwaysON" power domain on DM6467. Signed-off-by: Sekhar Nori --- arch/arm/mach-davinci/dm646x.c | 1 - 1 file changed, 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/mach-davinci/dm646x.c b/arch/arm/mach-davinci/dm646x.c index 0b68ed534f8e..af27c130595f 100644 --- a/arch/arm/mach-davinci/dm646x.c +++ b/arch/arm/mach-davinci/dm646x.c @@ -161,7 +161,6 @@ static struct clk dsp_clk = { .name = "dsp", .parent = &pll1_sysclk1, .lpsc = DM646X_LPSC_C64X_CPU, - .flags = PSC_DSP, .usecount = 1, /* REVISIT how to disable? */ }; -- cgit v1.2.1 From 83713fc9373be2e943f82e9d36213708c6b0050e Mon Sep 17 00:00:00 2001 From: Hans Verkuil Date: Mon, 14 Nov 2011 19:20:49 +0100 Subject: ARM: davinci: dm646x evm: wrong register used in setup_vpif_input_channel_mode The function setup_vpif_input_channel_mode() used the VSCLKDIS register instead of VIDCLKCTL. This meant that when in HD mode videoport channel 0 used a different clock from channel 1. Clearly a copy-and-paste error. Signed-off-by: Hans Verkuil Acked-by: Manjunath Hadli Signed-off-by: Sekhar Nori Cc: stable@kernel.org --- arch/arm/mach-davinci/board-dm646x-evm.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-davinci/board-dm646x-evm.c b/arch/arm/mach-davinci/board-dm646x-evm.c index e574d7f837a8..635bf7740157 100644 --- a/arch/arm/mach-davinci/board-dm646x-evm.c +++ b/arch/arm/mach-davinci/board-dm646x-evm.c @@ -564,7 +564,7 @@ static int setup_vpif_input_channel_mode(int mux_mode) int val; u32 value; - if (!vpif_vsclkdis_reg || !cpld_client) + if (!vpif_vidclkctl_reg || !cpld_client) return -ENXIO; val = i2c_smbus_read_byte(cpld_client); @@ -572,7 +572,7 @@ static int setup_vpif_input_channel_mode(int mux_mode) return val; spin_lock_irqsave(&vpif_reg_lock, flags); - value = __raw_readl(vpif_vsclkdis_reg); + value = __raw_readl(vpif_vidclkctl_reg); if (mux_mode) { val &= VPIF_INPUT_TWO_CHANNEL; value |= VIDCH1CLK; @@ -580,7 +580,7 @@ static int setup_vpif_input_channel_mode(int mux_mode) val |= VPIF_INPUT_ONE_CHANNEL; value &= ~VIDCH1CLK; } - __raw_writel(value, vpif_vsclkdis_reg); + __raw_writel(value, vpif_vidclkctl_reg); spin_unlock_irqrestore(&vpif_reg_lock, flags); err = i2c_smbus_write_byte(cpld_client, val); -- cgit v1.2.1 From f1b21c525693b0159aed83b5871f2d0f077f208e Mon Sep 17 00:00:00 2001 From: "Manjunathappa, Prakash" Date: Thu, 10 Nov 2011 11:43:21 +0530 Subject: ARM: davinci: da850 evm: change audio edma event queue to EVENTQ_0 On OMAP-L138 platform, EDMA event queue 0 should be used for audio transfers so that they are not starved by video data moving on event queue 1. Commit 48519f0ae03bc7e86b3dc93e56f1334d53803770 (ASoC: davinci: let platform data define edma queue numbers) had a side-effect of changing this behavior by making the driver actually honor the platform data passed. Fix this now by passing event queue 0 as the queue to be used for audio transfers. Signed-off-by: Manjunathappa, Prakash Signed-off-by: Sekhar Nori Cc: # v2.6.36.x and above --- arch/arm/mach-davinci/board-da850-evm.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/mach-davinci/board-da850-evm.c b/arch/arm/mach-davinci/board-da850-evm.c index 1d7d24995226..6659a90dbcad 100644 --- a/arch/arm/mach-davinci/board-da850-evm.c +++ b/arch/arm/mach-davinci/board-da850-evm.c @@ -753,7 +753,7 @@ static struct snd_platform_data da850_evm_snd_data = { .num_serializer = ARRAY_SIZE(da850_iis_serializer_direction), .tdm_slots = 2, .serial_dir = da850_iis_serializer_direction, - .asp_chan_q = EVENTQ_1, + .asp_chan_q = EVENTQ_0, .version = MCASP_VERSION_2, .txnumevt = 1, .rxnumevt = 1, -- cgit v1.2.1 From 45fc4cce939adc883fba5e02f1f3e0e9ff020c30 Mon Sep 17 00:00:00 2001 From: "Shankarmurthy,Akshay" Date: Wed, 9 Nov 2011 17:55:20 +0530 Subject: ARM: davinci: dm365 evm: align nand partition table to u-boot Current partition information maintained in kernel does not match with u-boot, this leads to corruption of u-boot env when we update uImage from kernel. Patch fixes it to match with u-boot partition information. Signed-off-by: Shankarmurthy,Akshay Signed-off-by: Sekhar Nori --- arch/arm/mach-davinci/board-dm365-evm.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/mach-davinci/board-dm365-evm.c b/arch/arm/mach-davinci/board-dm365-evm.c index 1918ae711428..46e1f4173b97 100644 --- a/arch/arm/mach-davinci/board-dm365-evm.c +++ b/arch/arm/mach-davinci/board-dm365-evm.c @@ -107,7 +107,7 @@ static struct mtd_partition davinci_nand_partitions[] = { /* UBL (a few copies) plus U-Boot */ .name = "bootloader", .offset = 0, - .size = 28 * NAND_BLOCK_SIZE, + .size = 30 * NAND_BLOCK_SIZE, .mask_flags = MTD_WRITEABLE, /* force read-only */ }, { /* U-Boot environment */ -- cgit v1.2.1 From 6be30bb7d7504ec687a65c9bbdae8d1d2f8eaa19 Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Wed, 16 Nov 2011 00:19:51 +0100 Subject: x86/reboot: Blacklist Dell OptiPlex 990 known to require PCI reboot Dell OptiPlex 990 is known to require PCI reboot, so add it to the reboot blacklist in pci_reboot_dmi_table[]. Signed-off-by: Rafael J. Wysocki Link: http://lkml.kernel.org/r/201111160019.51303.rjw@sisk.pl Signed-off-by: Ingo Molnar --- arch/x86/kernel/reboot.c | 8 ++++++++ 1 file changed, 8 insertions(+) (limited to 'arch') diff --git a/arch/x86/kernel/reboot.c b/arch/x86/kernel/reboot.c index e334be1182b9..4463d2fee4e3 100644 --- a/arch/x86/kernel/reboot.c +++ b/arch/x86/kernel/reboot.c @@ -443,6 +443,14 @@ static struct dmi_system_id __initdata pci_reboot_dmi_table[] = { DMI_MATCH(DMI_PRODUCT_NAME, "Latitude E6420"), }, }, + { /* Handle problems with rebooting on the OptiPlex 990. */ + .callback = set_pci_reboot, + .ident = "Dell OptiPlex 990", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."), + DMI_MATCH(DMI_PRODUCT_NAME, "OptiPlex 990"), + }, + }, { } }; -- cgit v1.2.1 From 48bc5562103412590e4487b666b49e7b6c84ba44 Mon Sep 17 00:00:00 2001 From: Jacob Pan Date: Wed, 16 Nov 2011 16:07:22 +0000 Subject: x86,mrst: Power control commands update On the Intel MID devices SCU commands are issued to manage power off and the like. We need to issue different ones for non-Lincroft based devices. Signed-off-by: Alek Du Signed-off-by: Jacob Pan Signed-off-by: Alan Cox Signed-off-by: Ingo Molnar --- arch/x86/include/asm/intel_scu_ipc.h | 14 +++++++++----- arch/x86/platform/mrst/mrst.c | 25 ++++++++++++++----------- 2 files changed, 23 insertions(+), 16 deletions(-) (limited to 'arch') diff --git a/arch/x86/include/asm/intel_scu_ipc.h b/arch/x86/include/asm/intel_scu_ipc.h index 4420993acc47..925b605eb5c6 100644 --- a/arch/x86/include/asm/intel_scu_ipc.h +++ b/arch/x86/include/asm/intel_scu_ipc.h @@ -3,11 +3,15 @@ #include -#define IPCMSG_VRTC 0xFA /* Set vRTC device */ - -/* Command id associated with message IPCMSG_VRTC */ -#define IPC_CMD_VRTC_SETTIME 1 /* Set time */ -#define IPC_CMD_VRTC_SETALARM 2 /* Set alarm */ +#define IPCMSG_WARM_RESET 0xF0 +#define IPCMSG_COLD_RESET 0xF1 +#define IPCMSG_SOFT_RESET 0xF2 +#define IPCMSG_COLD_BOOT 0xF3 + +#define IPCMSG_VRTC 0xFA /* Set vRTC device */ + /* Command id associated with message IPCMSG_VRTC */ + #define IPC_CMD_VRTC_SETTIME 1 /* Set time */ + #define IPC_CMD_VRTC_SETALARM 2 /* Set alarm */ /* Read single register */ int intel_scu_ipc_ioread8(u16 addr, u8 *data); diff --git a/arch/x86/platform/mrst/mrst.c b/arch/x86/platform/mrst/mrst.c index b1489a06a49d..fedc3d7ffa77 100644 --- a/arch/x86/platform/mrst/mrst.c +++ b/arch/x86/platform/mrst/mrst.c @@ -76,6 +76,20 @@ struct sfi_rtc_table_entry sfi_mrtc_array[SFI_MRTC_MAX]; EXPORT_SYMBOL_GPL(sfi_mrtc_array); int sfi_mrtc_num; +static void mrst_power_off(void) +{ + if (__mrst_cpu_chip == MRST_CPU_CHIP_LINCROFT) + intel_scu_ipc_simple_command(IPCMSG_COLD_RESET, 1); +} + +static void mrst_reboot(void) +{ + if (__mrst_cpu_chip == MRST_CPU_CHIP_LINCROFT) + intel_scu_ipc_simple_command(IPCMSG_COLD_RESET, 0); + else + intel_scu_ipc_simple_command(IPCMSG_COLD_BOOT, 0); +} + /* parse all the mtimer info to a static mtimer array */ static int __init sfi_parse_mtmr(struct sfi_table_header *table) { @@ -265,17 +279,6 @@ static int mrst_i8042_detect(void) return 0; } -/* Reboot and power off are handled by the SCU on a MID device */ -static void mrst_power_off(void) -{ - intel_scu_ipc_simple_command(0xf1, 1); -} - -static void mrst_reboot(void) -{ - intel_scu_ipc_simple_command(0xf1, 0); -} - /* * Moorestown does not have external NMI source nor port 0x61 to report * NMI status. The possible NMI sources are from pmu as a result of NMI -- cgit v1.2.1 From 28744b3e9c85ea281d6371d4914c2498bceec10c Mon Sep 17 00:00:00 2001 From: Jekyll Lai Date: Wed, 16 Nov 2011 18:01:20 +0000 Subject: mrst: Added some platform data for the SFI translations Add SFI glue for the following devices: tca6416: a gpio expander compatible with max7315 mpu3050: gyro sensor Both of these actual drivers are already upstream Signed-off-by: Jekyll Lai Signed-off-by: Alan Cox Signed-off-by: Ingo Molnar --- arch/x86/platform/mrst/mrst.c | 42 ++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 42 insertions(+) (limited to 'arch') diff --git a/arch/x86/platform/mrst/mrst.c b/arch/x86/platform/mrst/mrst.c index fedc3d7ffa77..940a0807a5ca 100644 --- a/arch/x86/platform/mrst/mrst.c +++ b/arch/x86/platform/mrst/mrst.c @@ -487,6 +487,46 @@ static void __init *max7315_platform_data(void *info) return max7315; } +static void *tca6416_platform_data(void *info) +{ + static struct pca953x_platform_data tca6416; + struct i2c_board_info *i2c_info = info; + int gpio_base, intr; + char base_pin_name[SFI_NAME_LEN + 1]; + char intr_pin_name[SFI_NAME_LEN + 1]; + + strcpy(i2c_info->type, "tca6416"); + strcpy(base_pin_name, "tca6416_base"); + strcpy(intr_pin_name, "tca6416_int"); + + gpio_base = get_gpio_by_name(base_pin_name); + intr = get_gpio_by_name(intr_pin_name); + + if (gpio_base == -1) + return NULL; + tca6416.gpio_base = gpio_base; + if (intr != -1) { + i2c_info->irq = intr + MRST_IRQ_OFFSET; + tca6416.irq_base = gpio_base + MRST_IRQ_OFFSET; + } else { + i2c_info->irq = -1; + tca6416.irq_base = -1; + } + return &tca6416; +} + +static void *mpu3050_platform_data(void *info) +{ + struct i2c_board_info *i2c_info = info; + int intr = get_gpio_by_name("mpu3050_int"); + + if (intr == -1) + return NULL; + + i2c_info->irq = intr + MRST_IRQ_OFFSET; + return NULL; +} + static void __init *emc1403_platform_data(void *info) { static short intr2nd_pdata; @@ -652,9 +692,11 @@ static const struct devs_id __initconst device_ids[] = { {"spi_max3111", SFI_DEV_TYPE_SPI, 0, &max3111_platform_data}, {"i2c_max7315", SFI_DEV_TYPE_I2C, 1, &max7315_platform_data}, {"i2c_max7315_2", SFI_DEV_TYPE_I2C, 1, &max7315_platform_data}, + {"tca6416", SFI_DEV_TYPE_I2C, 1, &tca6416_platform_data}, {"emc1403", SFI_DEV_TYPE_I2C, 1, &emc1403_platform_data}, {"i2c_accel", SFI_DEV_TYPE_I2C, 0, &lis331dl_platform_data}, {"pmic_audio", SFI_DEV_TYPE_IPC, 1, &no_platform_data}, + {"mpu3050", SFI_DEV_TYPE_I2C, 1, &mpu3050_platform_data}, /* MSIC subdevices */ {"msic_battery", SFI_DEV_TYPE_IPC, 1, &msic_battery_platform_data}, -- cgit v1.2.1 From efa221268566c2caa0e2a540068a2e8250fbb819 Mon Sep 17 00:00:00 2001 From: Feng Tang Date: Wed, 16 Nov 2011 18:32:34 +0000 Subject: x86, mrst: Change the pmic_gpio device type to IPC In latest firmware's SFI tables, pmic_gpio has been set to IPC type of device, so we need handle it too. Signed-off-by: Feng Tang Signed-off-by: Alan Cox Signed-off-by: Ingo Molnar --- arch/x86/platform/mrst/mrst.c | 1 + 1 file changed, 1 insertion(+) (limited to 'arch') diff --git a/arch/x86/platform/mrst/mrst.c b/arch/x86/platform/mrst/mrst.c index 940a0807a5ca..ad4ec1cb097e 100644 --- a/arch/x86/platform/mrst/mrst.c +++ b/arch/x86/platform/mrst/mrst.c @@ -689,6 +689,7 @@ static void *msic_ocd_platform_data(void *info) static const struct devs_id __initconst device_ids[] = { {"bma023", SFI_DEV_TYPE_I2C, 1, &no_platform_data}, {"pmic_gpio", SFI_DEV_TYPE_SPI, 1, &pmic_gpio_platform_data}, + {"pmic_gpio", SFI_DEV_TYPE_IPC, 1, &pmic_gpio_platform_data}, {"spi_max3111", SFI_DEV_TYPE_SPI, 0, &max3111_platform_data}, {"i2c_max7315", SFI_DEV_TYPE_I2C, 1, &max7315_platform_data}, {"i2c_max7315_2", SFI_DEV_TYPE_I2C, 1, &max7315_platform_data}, -- cgit v1.2.1 From 9e6866686bdf2dcf3aeb0838076237ede532dcc8 Mon Sep 17 00:00:00 2001 From: Bjorn Helgaas Date: Sun, 25 Sep 2011 15:29:00 -0600 Subject: x86/mpparse: Account for bus types other than ISA and PCI In commit f8924e770e04 ("x86: unify mp_bus_info"), the 32-bit and 64-bit versions of MP_bus_info were rearranged to match each other better. Unfortunately it introduced a regression: prior to that change we used to always set the mp_bus_not_pci bit, then clear it if we found a PCI bus. After it, we set mp_bus_not_pci for ISA buses, clear it for PCI buses, and leave it alone otherwise. In the cases of ISA and PCI, there's not much difference. But ISA is not the only non-PCI bus, so it's better to always set mp_bus_not_pci and clear it only for PCI. Without this change, Dan's Dell PowerEdge 4200 panics on boot with a log indicating interrupt routing trouble unless the "noapic" option is supplied. With this change, the machine boots reliably without "noapic". Fixes http://bugs.debian.org/586494 Reported-bisected-and-tested-by: Dan McGrath Signed-off-by: Bjorn Helgaas Cc: stable@vger.kernel.org # 2.6.26+ Cc: Dan McGrath Cc: Alexey Starikovskiy [jrnieder@gmail.com: clarified commit message] Signed-off-by: Jonathan Nieder Link: http://lkml.kernel.org/r/20111122215000.GA9151@elie.hsd1.il.comcast.net Signed-off-by: Ingo Molnar --- arch/x86/kernel/mpparse.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/x86/kernel/mpparse.c b/arch/x86/kernel/mpparse.c index 9103b89c145a..0741b062a304 100644 --- a/arch/x86/kernel/mpparse.c +++ b/arch/x86/kernel/mpparse.c @@ -95,8 +95,8 @@ static void __init MP_bus_info(struct mpc_bus *m) } #endif + set_bit(m->busid, mp_bus_not_pci); if (strncmp(str, BUSTYPE_ISA, sizeof(BUSTYPE_ISA) - 1) == 0) { - set_bit(m->busid, mp_bus_not_pci); #if defined(CONFIG_EISA) || defined(CONFIG_MCA) mp_bus_id_to_type[m->busid] = MP_BUS_ISA; #endif -- cgit v1.2.1 From 644ddf588f5dba34df483a6ea8abe639cc102289 Mon Sep 17 00:00:00 2001 From: Prarit Bhargava Date: Tue, 18 Oct 2011 13:24:10 -0400 Subject: Add TAINT_FIRMWARE_WORKAROUND on MTRR fixup TAINT_FIRMWARE_WORKAROUND should be set when an MTRR fixup is done. Signed-off-by: Prarit Bhargava Acked-by: David Rientjes Link: http://lkml.kernel.org/r/1318958650-12447-1-git-send-email-prarit@redhat.com Signed-off-by: Ingo Molnar --- arch/x86/kernel/cpu/mtrr/generic.c | 1 + 1 file changed, 1 insertion(+) (limited to 'arch') diff --git a/arch/x86/kernel/cpu/mtrr/generic.c b/arch/x86/kernel/cpu/mtrr/generic.c index a71efcdbb092..e1fe7f42e0fb 100644 --- a/arch/x86/kernel/cpu/mtrr/generic.c +++ b/arch/x86/kernel/cpu/mtrr/generic.c @@ -547,6 +547,7 @@ static void generic_get_mtrr(unsigned int reg, unsigned long *base, if (tmp != mask_lo) { printk(KERN_WARNING "mtrr: your BIOS has configured an incorrect mask, fixing it.\n"); + add_taint(TAINT_FIRMWARE_WORKAROUND); mask_lo = tmp; } } -- cgit v1.2.1 From bd399063976c6c7a09beb4730ed1d93cadbcc739 Mon Sep 17 00:00:00 2001 From: "Srivatsa S. Bhat" Date: Mon, 7 Nov 2011 18:05:32 +0530 Subject: x86, microcode: Fix the failure path of microcode update driver init code The microcode update driver's initialization code does not handle failures correctly. This patch fixes this issue. Signed-off-by: Jan Beulich Signed-off-by: Srivatsa S. Bhat Link: http://lkml.kernel.org/r/20111107123530.12164.31227.stgit@srivatsabhat.in.ibm.com Link: http://lkml.kernel.org/r/4ED8E2270200007800065120@nat28.tlf.novell.com Signed-off-by: Borislav Petkov --- arch/x86/kernel/microcode_core.c | 28 +++++++++++++++++++--------- 1 file changed, 19 insertions(+), 9 deletions(-) (limited to 'arch') diff --git a/arch/x86/kernel/microcode_core.c b/arch/x86/kernel/microcode_core.c index f2d2a664e797..9d46f5e43b51 100644 --- a/arch/x86/kernel/microcode_core.c +++ b/arch/x86/kernel/microcode_core.c @@ -256,7 +256,7 @@ static int __init microcode_dev_init(void) return 0; } -static void microcode_dev_exit(void) +static void __exit microcode_dev_exit(void) { misc_deregister(µcode_dev); } @@ -519,10 +519,8 @@ static int __init microcode_init(void) microcode_pdev = platform_device_register_simple("microcode", -1, NULL, 0); - if (IS_ERR(microcode_pdev)) { - microcode_dev_exit(); + if (IS_ERR(microcode_pdev)) return PTR_ERR(microcode_pdev); - } get_online_cpus(); mutex_lock(µcode_mutex); @@ -532,14 +530,12 @@ static int __init microcode_init(void) mutex_unlock(µcode_mutex); put_online_cpus(); - if (error) { - platform_device_unregister(microcode_pdev); - return error; - } + if (error) + goto out_pdev; error = microcode_dev_init(); if (error) - return error; + goto out_sysdev_driver; register_syscore_ops(&mc_syscore_ops); register_hotcpu_notifier(&mc_cpu_notifier); @@ -548,6 +544,20 @@ static int __init microcode_init(void) " , Peter Oruba\n"); return 0; + +out_sysdev_driver: + get_online_cpus(); + mutex_lock(µcode_mutex); + + sysdev_driver_unregister(&cpu_sysdev_class, &mc_sysdev_driver); + + mutex_unlock(µcode_mutex); + put_online_cpus(); + +out_pdev: + platform_device_unregister(microcode_pdev); + return error; + } module_init(microcode_init); -- cgit v1.2.1 From ce37defc0f6673f5ca2c92ed5cfcaf290ae7dd16 Mon Sep 17 00:00:00 2001 From: Borislav Petkov Date: Mon, 5 Dec 2011 14:28:37 +0100 Subject: x86: Document rdmsr_safe restrictions Recently, I got bitten by using rdmsr_safe too early in the boot process. Document its shortcomings for future reference. Link: http://lkml.kernel.org/r/4ED5B70F.606@lwfinger.net Signed-off-by: Borislav Petkov --- arch/x86/include/asm/msr.h | 9 ++++++++- 1 file changed, 8 insertions(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/x86/include/asm/msr.h b/arch/x86/include/asm/msr.h index 084ef95274cd..95203d40ffdd 100644 --- a/arch/x86/include/asm/msr.h +++ b/arch/x86/include/asm/msr.h @@ -169,7 +169,14 @@ static inline int wrmsr_safe(unsigned msr, unsigned low, unsigned high) return native_write_msr_safe(msr, low, high); } -/* rdmsr with exception handling */ +/* + * rdmsr with exception handling. + * + * Please note that the exception handling works only after we've + * switched to the "smart" #GP handler in trap_init() which knows about + * exception tables - using this macro earlier than that causes machine + * hangs on boxes which do not implement the @msr in the first argument. + */ #define rdmsr_safe(msr, p1, p2) \ ({ \ int __err; \ -- cgit v1.2.1 From 8dbf4a30033ff61091015f0076e872b5c8f717cc Mon Sep 17 00:00:00 2001 From: Ajaykumar Hotchandani Date: Fri, 11 Nov 2011 18:31:57 +0530 Subject: x86/mtrr: Resolve inconsistency with Intel processor manual Following is from Notes of section 11.5.3 of Intel processor manual available at: http://www.intel.com/Assets/PDF/manual/325384.pdf For the Pentium 4 and Intel Xeon processors, after the sequence of steps given above has been executed, the cache lines containing the code between the end of the WBINVD instruction and before the MTRRS have actually been disabled may be retained in the cache hierarchy. Here, to remove code from the cache completely, a second WBINVD instruction must be executed after the MTRRs have been disabled. This patch provides resolution for that. Ideally, I will like to make changes only for Pentium 4 and Xeon processors. But, I am not finding easier way to do it. And, extra wbinvd() instruction does not hurt much for other processors. Signed-off-by: Ajaykumar Hotchandani Cc: Linus Torvalds Cc: Arjan van de Ven Cc: Lucas De Marchi Link: http://lkml.kernel.org/r/4EBD1CC5.3030008@oracle.com Signed-off-by: Ingo Molnar --- arch/x86/kernel/cpu/mtrr/generic.c | 1 + 1 file changed, 1 insertion(+) (limited to 'arch') diff --git a/arch/x86/kernel/cpu/mtrr/generic.c b/arch/x86/kernel/cpu/mtrr/generic.c index e1fe7f42e0fb..97b26356e9ee 100644 --- a/arch/x86/kernel/cpu/mtrr/generic.c +++ b/arch/x86/kernel/cpu/mtrr/generic.c @@ -694,6 +694,7 @@ static void prepare_set(void) __acquires(set_atomicity_lock) /* Disable MTRRs, and set the default type to uncached */ mtrr_wrmsr(MSR_MTRRdefType, deftype_lo & ~0xcff, deftype_hi); + wbinvd(); } static void post_set(void) __releases(set_atomicity_lock) -- cgit v1.2.1 From 1ef03890969932e9359b9a4c658f7f87771910ac Mon Sep 17 00:00:00 2001 From: Peter Chubb Date: Mon, 5 Dec 2011 16:53:53 +0300 Subject: x86: Fix "Acer Aspire 1" reboot hang MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Looks like on some Acer Aspire 1s with older bioses, reboot via bios fails. It works on my machine, (with BIOS version 0.3310) but not on some others (BIOS version 0.3309). There's a log of problems at: https://bbs.archlinux.org/viewtopic.php?id=124136 This patch adds a different callback to the reboot quirk table, to allow rebooting via keybaord controller. Reported-by: Uroš Vampl Tested-by: Vasily Khoruzhick Signed-off-by: Peter Chubb Cc: Don Zickus Cc: Peter Zijlstra Cc: stable@kernel.org Link: http://lkml.kernel.org/r/1323093233-9481-1-git-send-email-anarsoul@gmail.com Signed-off-by: Ingo Molnar --- arch/x86/kernel/reboot.c | 13 +++++++++++-- 1 file changed, 11 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/x86/kernel/reboot.c b/arch/x86/kernel/reboot.c index 4463d2fee4e3..37a458b521a6 100644 --- a/arch/x86/kernel/reboot.c +++ b/arch/x86/kernel/reboot.c @@ -124,7 +124,7 @@ __setup("reboot=", reboot_setup); */ /* - * Some machines require the "reboot=b" commandline option, + * Some machines require the "reboot=b" or "reboot=k" commandline options, * this quirk makes that automatic. */ static int __init set_bios_reboot(const struct dmi_system_id *d) @@ -136,6 +136,15 @@ static int __init set_bios_reboot(const struct dmi_system_id *d) return 0; } +static int __init set_kbd_reboot(const struct dmi_system_id *d) +{ + if (reboot_type != BOOT_KBD) { + reboot_type = BOOT_KBD; + printk(KERN_INFO "%s series board detected. Selecting KBD-method for reboot.\n", d->ident); + } + return 0; +} + static struct dmi_system_id __initdata reboot_dmi_table[] = { { /* Handle problems with rebooting on Dell E520's */ .callback = set_bios_reboot, @@ -295,7 +304,7 @@ static struct dmi_system_id __initdata reboot_dmi_table[] = { }, }, { /* Handle reboot issue on Acer Aspire one */ - .callback = set_bios_reboot, + .callback = set_kbd_reboot, .ident = "Acer Aspire One A110", .matches = { DMI_MATCH(DMI_SYS_VENDOR, "Acer"), -- cgit v1.2.1 From 2cd1c8d4dc7ecca9e9431e2dabe41ae9c7d89e51 Mon Sep 17 00:00:00 2001 From: Konrad Rzeszutek Wilk Date: Tue, 15 Nov 2011 14:49:09 -0800 Subject: x86/paravirt: PTE updates in k(un)map_atomic need to be synchronous, regardless of lazy_mmu mode Fix an outstanding issue that has been reported since 2.6.37. Under a heavy loaded machine processing "fork()" calls could crash with: BUG: unable to handle kernel paging request at f573fc8c IP: [] swap_count_continued+0x104/0x180 *pdpt = 000000002a3b9027 *pde = 0000000001bed067 *pte = 0000000000000000 Oops: 0000 [#1] SMP Modules linked in: Pid: 1638, comm: apache2 Not tainted 3.0.4-linode37 #1 EIP: 0061:[] EFLAGS: 00210246 CPU: 3 EIP is at swap_count_continued+0x104/0x180 .. snip.. Call Trace: [] ? __swap_duplicate+0xc2/0x160 [] ? pte_mfn_to_pfn+0x87/0xe0 [] ? swap_duplicate+0x14/0x40 [] ? copy_pte_range+0x45b/0x500 [] ? copy_page_range+0x195/0x200 [] ? dup_mmap+0x1c6/0x2c0 [] ? dup_mm+0xa8/0x130 [] ? copy_process+0x98a/0xb30 [] ? do_fork+0x4f/0x280 [] ? getnstimeofday+0x43/0x100 [] ? sys_clone+0x30/0x40 [] ? ptregs_clone+0x15/0x48 [] ? syscall_call+0x7/0xb The problem is that in copy_page_range() we turn lazy mode on, and then in swap_entry_free() we call swap_count_continued() which ends up in: map = kmap_atomic(page, KM_USER0) + offset; and then later we touch *map. Since we are running in batched mode (lazy) we don't actually set up the PTE mappings and the kmap_atomic is not done synchronously and ends up trying to dereference a page that has not been set. Looking at kmap_atomic_prot_pfn(), it uses 'arch_flush_lazy_mmu_mode' and doing the same in kmap_atomic_prot() and __kunmap_atomic() makes the problem go away. Interestingly, commit b8bcfe997e4615 ("x86/paravirt: remove lazy mode in interrupts") removed part of this to fix an interrupt issue - but it went to far and did not consider this scenario. Signed-off-by: Konrad Rzeszutek Wilk Cc: Peter Zijlstra Cc: Jeremy Fitzhardinge Cc: Signed-off-by: Andrew Morton Signed-off-by: Ingo Molnar --- arch/x86/mm/highmem_32.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'arch') diff --git a/arch/x86/mm/highmem_32.c b/arch/x86/mm/highmem_32.c index b49962662101..f4f29b19fac5 100644 --- a/arch/x86/mm/highmem_32.c +++ b/arch/x86/mm/highmem_32.c @@ -45,6 +45,7 @@ void *kmap_atomic_prot(struct page *page, pgprot_t prot) vaddr = __fix_to_virt(FIX_KMAP_BEGIN + idx); BUG_ON(!pte_none(*(kmap_pte-idx))); set_pte(kmap_pte-idx, mk_pte(page, prot)); + arch_flush_lazy_mmu_mode(); return (void *)vaddr; } @@ -88,6 +89,7 @@ void __kunmap_atomic(void *kvaddr) */ kpte_clear_flush(kmap_pte-idx, vaddr); kmap_atomic_idx_pop(); + arch_flush_lazy_mmu_mode(); } #ifdef CONFIG_DEBUG_HIGHMEM else { -- cgit v1.2.1 From 35d476996288af6a4aaa8b172bcd31decd233de7 Mon Sep 17 00:00:00 2001 From: Mathias Nyman Date: Tue, 15 Nov 2011 14:46:52 -0800 Subject: x86/rtc, mrst: Don't register a platform RTC device for for Intel MID platforms Intel MID x86 platforms have a memory mapped virtual RTC instead. No MID platform have the default ports (and accessing them may do weird stuff). Signed-off-by: Mathias Nyman Signed-off-by: Alan Cox Cc: feng.tang@intel.com Cc: Feng Tang Cc: "H. Peter Anvin" Signed-off-by: Andrew Morton Signed-off-by: Ingo Molnar --- arch/x86/include/asm/mrst.h | 9 +++++++++ arch/x86/kernel/rtc.c | 5 +++++ 2 files changed, 14 insertions(+) (limited to 'arch') diff --git a/arch/x86/include/asm/mrst.h b/arch/x86/include/asm/mrst.h index e6283129c821..93f79094c224 100644 --- a/arch/x86/include/asm/mrst.h +++ b/arch/x86/include/asm/mrst.h @@ -31,11 +31,20 @@ enum mrst_cpu_type { }; extern enum mrst_cpu_type __mrst_cpu_chip; + +#ifdef CONFIG_X86_INTEL_MID + static inline enum mrst_cpu_type mrst_identify_cpu(void) { return __mrst_cpu_chip; } +#else /* !CONFIG_X86_INTEL_MID */ + +#define mrst_identify_cpu() (0) + +#endif /* !CONFIG_X86_INTEL_MID */ + enum mrst_timer_options { MRST_TIMER_DEFAULT, MRST_TIMER_APBT_ONLY, diff --git a/arch/x86/kernel/rtc.c b/arch/x86/kernel/rtc.c index 348ce016a835..af6db6ec5b2a 100644 --- a/arch/x86/kernel/rtc.c +++ b/arch/x86/kernel/rtc.c @@ -12,6 +12,7 @@ #include #include #include +#include #ifdef CONFIG_X86_32 /* @@ -242,6 +243,10 @@ static __init int add_rtc_cmos(void) if (of_have_populated_dt()) return 0; + /* Intel MID platforms don't have ioport rtc */ + if (mrst_identify_cpu()) + return -ENODEV; + platform_device_register(&rtc_device); dev_info(&rtc_device.dev, "registered platform RTC device (no PNP device found)\n"); -- cgit v1.2.1 From f62ef5f3e9cff065aa845e2b7f487e1810b8e57e Mon Sep 17 00:00:00 2001 From: Andreas Herrmann Date: Fri, 2 Dec 2011 08:21:43 +0100 Subject: x86, amd: Fix up numa_node information for AMD CPU family 15h model 0-0fh northbridge functions I've received complaints that the numa_node attribute for family 15h model 00-0fh (e.g. Interlagos) northbridge functions shows -1 instead of the proper node ID. Correct this with attached quirks (similar to quirks for other AMD CPU families used in multi-socket systems). Signed-off-by: Andreas Herrmann Cc: Frank Arnold Cc: Borislav Petkov Link: http://lkml.kernel.org/r/20111202072143.GA31916@alberich.amd.com Signed-off-by: Ingo Molnar --- arch/x86/kernel/quirks.c | 13 +++++++++++++ 1 file changed, 13 insertions(+) (limited to 'arch') diff --git a/arch/x86/kernel/quirks.c b/arch/x86/kernel/quirks.c index b78643d0f9a5..03920a15a632 100644 --- a/arch/x86/kernel/quirks.c +++ b/arch/x86/kernel/quirks.c @@ -553,4 +553,17 @@ DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_10H_NB_MISC, quirk_amd_nb_node); DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_10H_NB_LINK, quirk_amd_nb_node); +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_15H_NB_F0, + quirk_amd_nb_node); +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_15H_NB_F1, + quirk_amd_nb_node); +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_15H_NB_F2, + quirk_amd_nb_node); +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_15H_NB_F3, + quirk_amd_nb_node); +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_15H_NB_F4, + quirk_amd_nb_node); +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_15H_NB_F5, + quirk_amd_nb_node); + #endif -- cgit v1.2.1 From 6560ee07dc946e94f7cc2cd8e3b5a5f5ee7340c1 Mon Sep 17 00:00:00 2001 From: Janusz Krzysztofik Date: Thu, 1 Dec 2011 21:13:02 +0100 Subject: ARM: OMAP1: recalculate loops per jiffy after dpll1 reprogram Otherwise timing is inaccurate, resulting in devices which depend on it, like omap-keypad, broken. Tested on Amstrad Delta. Signed-off-by: Janusz Krzysztofik [tony@atomide.com: removed comment referencing a development branch] Signed-off-by: Tony Lindgren --- arch/arm/mach-omap1/clock_data.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/mach-omap1/clock_data.c b/arch/arm/mach-omap1/clock_data.c index 86b2dec11788..9ff90a744a21 100644 --- a/arch/arm/mach-omap1/clock_data.c +++ b/arch/arm/mach-omap1/clock_data.c @@ -16,6 +16,8 @@ #include #include +#include +#include #include #include /* for machine_is_* */ @@ -927,7 +929,9 @@ int __init omap1_clk_init(void) void __init omap1_clk_late_init(void) { - if (ck_dpll1.rate >= OMAP1_DPLL1_SANE_VALUE) + unsigned long rate = ck_dpll1.rate; + + if (rate >= OMAP1_DPLL1_SANE_VALUE) return; /* System booting at unusable rate, force reprogramming of DPLL1 */ @@ -942,4 +946,5 @@ void __init omap1_clk_late_init(void) } propagate_rate(&ck_dpll1); omap1_show_rates(); + loops_per_jiffy = cpufreq_scale(loops_per_jiffy, rate, ck_dpll1.rate); } -- cgit v1.2.1 From 96f176a310e447966e45112fe4511b9d9fa0caf4 Mon Sep 17 00:00:00 2001 From: Joerg Roedel Date: Tue, 6 Dec 2011 11:17:34 +0100 Subject: iommu/msm: Fix compile error in mach-msm/devices-iommu.c Fix compile error due to missing include. Signed-off-by: Joerg Roedel --- arch/arm/mach-msm/devices-iommu.c | 1 + 1 file changed, 1 insertion(+) (limited to 'arch') diff --git a/arch/arm/mach-msm/devices-iommu.c b/arch/arm/mach-msm/devices-iommu.c index 24030d0da6e3..0fb7a17df398 100644 --- a/arch/arm/mach-msm/devices-iommu.c +++ b/arch/arm/mach-msm/devices-iommu.c @@ -18,6 +18,7 @@ #include #include #include +#include #include #include -- cgit v1.2.1 From dd13752537d36cc6c145cb040f71ce7acda31e6e Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Mon, 5 Dec 2011 23:14:39 +0000 Subject: x86/intel_mid: Fix the Kconfig for MID selection We currently fail to build on CONFIG_X86_INTEL_MID=y and CONFIG_X86_MRST unset. We could build all the bits to make generic MID work if you picked MID platform alone but that's really silly. Instead use select and two variables. This looks a bit daft right now but once we add a Medfield selection it'll start to look a good deal more sensible. Reported-by: Ingo Molnar Reported-by: Stanislaw Gruszka Signed-off-by: Alan Cox Link: http://lkml.kernel.org/r/20111205231433.28811.51297.stgit@bob.linux.org.uk Signed-off-by: Ingo Molnar --- arch/x86/Kconfig | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig index cb9a1044a771..5553f9f1a70d 100644 --- a/arch/x86/Kconfig +++ b/arch/x86/Kconfig @@ -390,7 +390,7 @@ config X86_INTEL_CE This option compiles in support for the CE4100 SOC for settop boxes and media devices. -config X86_INTEL_MID +config X86_WANT_INTEL_MID bool "Intel MID platform support" depends on X86_32 depends on X86_EXTENDED_PLATFORM @@ -399,7 +399,7 @@ config X86_INTEL_MID systems which do not have the PCI legacy interfaces (Moorestown, Medfield). If you are building for a PC class system say N here. -if X86_INTEL_MID +if X86_WANT_INTEL_MID config X86_MRST bool "Moorestown MID platform" @@ -411,6 +411,7 @@ config X86_MRST select SPI select INTEL_SCU_IPC select X86_PLATFORM_DEVICES + select X86_INTEL_MID ---help--- Moorestown is Intel's Low Power Intel Architecture (LPIA) based Moblin Internet Device(MID) platform. Moorestown consists of two chips: -- cgit v1.2.1 From 974c07249b06d948154be3275bf4f6e55b585300 Mon Sep 17 00:00:00 2001 From: Nicolas Pitre Date: Fri, 2 Dec 2011 23:09:42 +0100 Subject: ARM: 7186/1: fix Kconfig issue with PHYS_OFFSET and !MMU MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Commit 1b9f95f8ade9 (ARM: prepare for removal of a bunch of files) introduced CONFIG_PHYS_OFFSET but the Kconfig hex prompt did not provide a default value. This has the undesired side effect of breaking a reportedly used trick for updating defconfigs on the fly for routine buildtesting across all arch and all platforms, i.e. cp /path/to/somedefconfig .config ; yes "" | make oldconfig because the config system will endlessly loop until a valid address is provided. However we can't just pick a random default value since it is likely to be wrong for the majority of the boards as the right answer for this option is quite varied. So the fact that the config system insists on having a proper value be entered is actually a good thing. It turns out that only at91x40_defconfig has this problem because it has CONFIG_MMU=n. However, in the !MMU case, there is already a CONFIG_DRAM_BASE value that can be used here. So let's use that as a default in that case and suppress the redundant CONFIG_PHYS_OFFSET prompt. Eventually the DRAM_BASE config option could simply be replaced by PHYS_OFFSET directly, but that's a larger change better suited for later. Reported-by: Paul Gortmaker Signed-off-by: Nicolas Pitre Acked-by: Uwe Kleine-König Signed-off-by: Russell King --- arch/arm/Kconfig | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index e084b7e981e8..776d76b8cb69 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -220,8 +220,9 @@ config NEED_MACH_MEMORY_H be avoided when possible. config PHYS_OFFSET - hex "Physical address of main memory" + hex "Physical address of main memory" if MMU depends on !ARM_PATCH_PHYS_VIRT && !NEED_MACH_MEMORY_H + default DRAM_BASE if !MMU help Please provide the physical address corresponding to the location of main memory in your system. -- cgit v1.2.1 From de66a979012dbc66b1ec0125795a3f79ee667b8a Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Uwe=20Kleine-K=C3=B6nig?= Date: Mon, 5 Dec 2011 09:39:59 +0100 Subject: ARM: 7187/1: fix unwinding for XIP kernels MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The linker places the unwind tables in readonly sections. So when using an XIP kernel these are located in ROM and cannot be modified. For that reason the current approach to convert the relative offsets in the unwind index to absolute addresses early in the boot process doesn't work with XIP. The offsets in the unwind index section are signed 31 bit numbers and the structs are sorted by this offset. So it first has offsets between 0x40000000 and 0x7fffffff (i.e. the negative offsets) and then offsets between 0x00000000 and 0x3fffffff. When seperating these two blocks the numbers are sorted even when interpreting the offsets as unsigned longs. So determine the first non-negative entry once and track that using the new origin pointer. The actual bisection can then use a plain unsigned long comparison. The only thing that makes the new bisection more complicated is that the offsets are relative to their position in the index section, so the key to search needs to be adapted accordingly in each step. Moreover several consts are added to catch future writes and rename the member "addr" of struct unwind_idx to "addr_offset" to better match the new semantic. (This has the additional benefit of breaking eventual users at compile time to make them aware of the change.) In my tests the new algorithm was a tad faster than the original and has the additional upside of not needing the initial conversion and so saves some boot time and it's possible to unwind even earlier. Acked-by: Catalin Marinas Acked-by: Nicolas Pitre Signed-off-by: Uwe Kleine-König Signed-off-by: Russell King --- arch/arm/include/asm/unwind.h | 16 ++---- arch/arm/kernel/setup.c | 2 - arch/arm/kernel/unwind.c | 129 +++++++++++++++++++++++++++--------------- 3 files changed, 88 insertions(+), 59 deletions(-) (limited to 'arch') diff --git a/arch/arm/include/asm/unwind.h b/arch/arm/include/asm/unwind.h index a5edf421005c..d1c3f3a71c94 100644 --- a/arch/arm/include/asm/unwind.h +++ b/arch/arm/include/asm/unwind.h @@ -30,14 +30,15 @@ enum unwind_reason_code { }; struct unwind_idx { - unsigned long addr; + unsigned long addr_offset; unsigned long insn; }; struct unwind_table { struct list_head list; - struct unwind_idx *start; - struct unwind_idx *stop; + const struct unwind_idx *start; + const struct unwind_idx *origin; + const struct unwind_idx *stop; unsigned long begin_addr; unsigned long end_addr; }; @@ -49,15 +50,6 @@ extern struct unwind_table *unwind_table_add(unsigned long start, extern void unwind_table_del(struct unwind_table *tab); extern void unwind_backtrace(struct pt_regs *regs, struct task_struct *tsk); -#ifdef CONFIG_ARM_UNWIND -extern int __init unwind_init(void); -#else -static inline int __init unwind_init(void) -{ - return 0; -} -#endif - #endif /* !__ASSEMBLY__ */ #ifdef CONFIG_ARM_UNWIND diff --git a/arch/arm/kernel/setup.c b/arch/arm/kernel/setup.c index 3448a3f9cc8c..1bdd0adbb7dd 100644 --- a/arch/arm/kernel/setup.c +++ b/arch/arm/kernel/setup.c @@ -895,8 +895,6 @@ void __init setup_arch(char **cmdline_p) { struct machine_desc *mdesc; - unwind_init(); - setup_processor(); mdesc = setup_machine_fdt(__atags_pointer); if (!mdesc) diff --git a/arch/arm/kernel/unwind.c b/arch/arm/kernel/unwind.c index e7e8365795c3..3f03fe0c3269 100644 --- a/arch/arm/kernel/unwind.c +++ b/arch/arm/kernel/unwind.c @@ -67,7 +67,7 @@ EXPORT_SYMBOL(__aeabi_unwind_cpp_pr2); struct unwind_ctrl_block { unsigned long vrs[16]; /* virtual register set */ - unsigned long *insn; /* pointer to the current instructions word */ + const unsigned long *insn; /* pointer to the current instructions word */ int entries; /* number of entries left to interpret */ int byte; /* current byte number in the instructions word */ }; @@ -83,8 +83,9 @@ enum regs { PC = 15 }; -extern struct unwind_idx __start_unwind_idx[]; -extern struct unwind_idx __stop_unwind_idx[]; +extern const struct unwind_idx __start_unwind_idx[]; +static const struct unwind_idx *__origin_unwind_idx; +extern const struct unwind_idx __stop_unwind_idx[]; static DEFINE_SPINLOCK(unwind_lock); static LIST_HEAD(unwind_tables); @@ -98,45 +99,99 @@ static LIST_HEAD(unwind_tables); }) /* - * Binary search in the unwind index. The entries entries are + * Binary search in the unwind index. The entries are * guaranteed to be sorted in ascending order by the linker. + * + * start = first entry + * origin = first entry with positive offset (or stop if there is no such entry) + * stop - 1 = last entry */ -static struct unwind_idx *search_index(unsigned long addr, - struct unwind_idx *first, - struct unwind_idx *last) +static const struct unwind_idx *search_index(unsigned long addr, + const struct unwind_idx *start, + const struct unwind_idx *origin, + const struct unwind_idx *stop) { - pr_debug("%s(%08lx, %p, %p)\n", __func__, addr, first, last); + unsigned long addr_prel31; + + pr_debug("%s(%08lx, %p, %p, %p)\n", + __func__, addr, start, origin, stop); + + /* + * only search in the section with the matching sign. This way the + * prel31 numbers can be compared as unsigned longs. + */ + if (addr < (unsigned long)start) + /* negative offsets: [start; origin) */ + stop = origin; + else + /* positive offsets: [origin; stop) */ + start = origin; + + /* prel31 for address relavive to start */ + addr_prel31 = (addr - (unsigned long)start) & 0x7fffffff; - if (addr < first->addr) { + while (start < stop - 1) { + const struct unwind_idx *mid = start + ((stop - start) >> 1); + + /* + * As addr_prel31 is relative to start an offset is needed to + * make it relative to mid. + */ + if (addr_prel31 - ((unsigned long)mid - (unsigned long)start) < + mid->addr_offset) + stop = mid; + else { + /* keep addr_prel31 relative to start */ + addr_prel31 -= ((unsigned long)mid - + (unsigned long)start); + start = mid; + } + } + + if (likely(start->addr_offset <= addr_prel31)) + return start; + else { pr_warning("unwind: Unknown symbol address %08lx\n", addr); return NULL; - } else if (addr >= last->addr) - return last; + } +} - while (first < last - 1) { - struct unwind_idx *mid = first + ((last - first + 1) >> 1); +static const struct unwind_idx *unwind_find_origin( + const struct unwind_idx *start, const struct unwind_idx *stop) +{ + pr_debug("%s(%p, %p)\n", __func__, start, stop); + while (start < stop - 1) { + const struct unwind_idx *mid = start + ((stop - start) >> 1); - if (addr < mid->addr) - last = mid; + if (mid->addr_offset >= 0x40000000) + /* negative offset */ + start = mid; else - first = mid; + /* positive offset */ + stop = mid; } - - return first; + pr_debug("%s -> %p\n", __func__, stop); + return stop; } -static struct unwind_idx *unwind_find_idx(unsigned long addr) +static const struct unwind_idx *unwind_find_idx(unsigned long addr) { - struct unwind_idx *idx = NULL; + const struct unwind_idx *idx = NULL; unsigned long flags; pr_debug("%s(%08lx)\n", __func__, addr); - if (core_kernel_text(addr)) + if (core_kernel_text(addr)) { + if (unlikely(!__origin_unwind_idx)) + __origin_unwind_idx = + unwind_find_origin(__start_unwind_idx, + __stop_unwind_idx); + /* main unwind table */ idx = search_index(addr, __start_unwind_idx, - __stop_unwind_idx - 1); - else { + __origin_unwind_idx, + __stop_unwind_idx); + } else { /* module unwind tables */ struct unwind_table *table; @@ -145,7 +200,8 @@ static struct unwind_idx *unwind_find_idx(unsigned long addr) if (addr >= table->begin_addr && addr < table->end_addr) { idx = search_index(addr, table->start, - table->stop - 1); + table->origin, + table->stop); /* Move-to-front to exploit common traces */ list_move(&table->list, &unwind_tables); break; @@ -274,7 +330,7 @@ static int unwind_exec_insn(struct unwind_ctrl_block *ctrl) int unwind_frame(struct stackframe *frame) { unsigned long high, low; - struct unwind_idx *idx; + const struct unwind_idx *idx; struct unwind_ctrl_block ctrl; /* only go to a higher address on the stack */ @@ -399,7 +455,6 @@ struct unwind_table *unwind_table_add(unsigned long start, unsigned long size, unsigned long text_size) { unsigned long flags; - struct unwind_idx *idx; struct unwind_table *tab = kmalloc(sizeof(*tab), GFP_KERNEL); pr_debug("%s(%08lx, %08lx, %08lx, %08lx)\n", __func__, start, size, @@ -408,15 +463,12 @@ struct unwind_table *unwind_table_add(unsigned long start, unsigned long size, if (!tab) return tab; - tab->start = (struct unwind_idx *)start; - tab->stop = (struct unwind_idx *)(start + size); + tab->start = (const struct unwind_idx *)start; + tab->stop = (const struct unwind_idx *)(start + size); + tab->origin = unwind_find_origin(tab->start, tab->stop); tab->begin_addr = text_addr; tab->end_addr = text_addr + text_size; - /* Convert the symbol addresses to absolute values */ - for (idx = tab->start; idx < tab->stop; idx++) - idx->addr = prel31_to_addr(&idx->addr); - spin_lock_irqsave(&unwind_lock, flags); list_add_tail(&tab->list, &unwind_tables); spin_unlock_irqrestore(&unwind_lock, flags); @@ -437,16 +489,3 @@ void unwind_table_del(struct unwind_table *tab) kfree(tab); } - -int __init unwind_init(void) -{ - struct unwind_idx *idx; - - /* Convert the symbol addresses to absolute values */ - for (idx = __start_unwind_idx; idx < __stop_unwind_idx; idx++) - idx->addr = prel31_to_addr(&idx->addr); - - pr_debug("unwind: ARM stack unwinding initialised\n"); - - return 0; -} -- cgit v1.2.1 From 6bd054096dce061560cee0e016e292e588dc438f Mon Sep 17 00:00:00 2001 From: Will Deacon Date: Fri, 2 Dec 2011 18:16:01 +0100 Subject: ARM: 7185/1: perf: don't assign platform_device on unsupported CPUs In the unlikely case that a platform registers a PMU platform_device when running on a CPU that is unsupported by perf, we will encounter a NULL dereference when trying to assign the platform_device to the cpu_pmu structure. This patch checks that the CPU is supported by perf before assigning the platform_device. Reported-by: Pawel Moll Signed-off-by: Will Deacon Signed-off-by: Russell King --- arch/arm/kernel/perf_event.c | 3 +++ 1 file changed, 3 insertions(+) (limited to 'arch') diff --git a/arch/arm/kernel/perf_event.c b/arch/arm/kernel/perf_event.c index 8e9c98edc068..88b0941ce51e 100644 --- a/arch/arm/kernel/perf_event.c +++ b/arch/arm/kernel/perf_event.c @@ -640,6 +640,9 @@ static struct platform_device_id armpmu_plat_device_ids[] = { static int __devinit armpmu_device_probe(struct platform_device *pdev) { + if (!cpu_pmu) + return -ENODEV; + cpu_pmu->plat_device = pdev; return 0; } -- cgit v1.2.1 From 4e2b1c4f56227c742bbd2ea8e8f559567eb80c3f Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Tue, 6 Dec 2011 13:28:22 +0000 Subject: x86/intel_mid: Kconfig select fix If we select a symbol it should have a type declared first otherwise in some situations the config tools get upset. They are currently perhaps a bit too resilient which is why this wasn't noticed initially. Signed-off-by: Alan Cox Link: http://lkml.kernel.org/r/20111206132811.4041.32549.stgit@bob.linux.org.uk Signed-off-by: Ingo Molnar --- arch/x86/Kconfig | 3 +++ 1 file changed, 3 insertions(+) (limited to 'arch') diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig index 5553f9f1a70d..efb42949cc09 100644 --- a/arch/x86/Kconfig +++ b/arch/x86/Kconfig @@ -401,6 +401,9 @@ config X86_WANT_INTEL_MID if X86_WANT_INTEL_MID +config X86_INTEL_MID + bool + config X86_MRST bool "Moorestown MID platform" depends on PCI -- cgit v1.2.1 From 5bf1e97dc34bf09643815ed48be3d1761a5985e1 Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Tue, 15 Nov 2011 22:22:49 +0100 Subject: m68k: Wire up process_vm_{read,write}v Signed-off-by: Geert Uytterhoeven Acked-by: Greg Ungerer --- arch/m68k/include/asm/unistd.h | 4 +++- arch/m68k/kernel/syscalltable.S | 2 ++ 2 files changed, 5 insertions(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/m68k/include/asm/unistd.h b/arch/m68k/include/asm/unistd.h index 43f984e93970..303192fc9260 100644 --- a/arch/m68k/include/asm/unistd.h +++ b/arch/m68k/include/asm/unistd.h @@ -350,10 +350,12 @@ #define __NR_clock_adjtime 342 #define __NR_syncfs 343 #define __NR_setns 344 +#define __NR_process_vm_readv 345 +#define __NR_process_vm_writev 346 #ifdef __KERNEL__ -#define NR_syscalls 345 +#define NR_syscalls 347 #define __ARCH_WANT_IPC_PARSE_VERSION #define __ARCH_WANT_OLD_READDIR diff --git a/arch/m68k/kernel/syscalltable.S b/arch/m68k/kernel/syscalltable.S index c468f2edaa85..ce827b376110 100644 --- a/arch/m68k/kernel/syscalltable.S +++ b/arch/m68k/kernel/syscalltable.S @@ -365,4 +365,6 @@ ENTRY(sys_call_table) .long sys_clock_adjtime .long sys_syncfs .long sys_setns + .long sys_process_vm_readv /* 345 */ + .long sys_process_vm_writev -- cgit v1.2.1 From d7a4c45ec24b6c6773ff302c3c9cb5ed46c8e211 Mon Sep 17 00:00:00 2001 From: Jingoo Han Date: Thu, 8 Dec 2011 10:07:53 +0900 Subject: ARM: SAMSUNG: remove duplicated header include This patch removes duplicated slab header for pwm backlight. arch/arm/plat-samsung/dev-backlight.c: slab.h is included more than once. Signed-off-by: Jingoo Han Signed-off-by: Kukjin Kim --- arch/arm/plat-samsung/dev-backlight.c | 1 - 1 file changed, 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/plat-samsung/dev-backlight.c b/arch/arm/plat-samsung/dev-backlight.c index e657305644cc..a976c023b286 100644 --- a/arch/arm/plat-samsung/dev-backlight.c +++ b/arch/arm/plat-samsung/dev-backlight.c @@ -15,7 +15,6 @@ #include #include #include -#include #include #include -- cgit v1.2.1 From de611dd4078499d5aa5ae9655652687ae630585f Mon Sep 17 00:00:00 2001 From: Jingoo Han Date: Thu, 8 Dec 2011 10:08:38 +0900 Subject: ARM: S5PV210: Set 1000ns as PWM backlight period on SMDKV210 The SMDK board uses LT3591 as backlight LED driver of LTE480WV LCD. According to the LT3591 datasheet, the switching frequency should be 1MHz. So, PWM period is calculated by following formula: PWM period = 1/switching frequency = 1/1MHz = 1000ns Thus, the PWM backlight period should be 1000ns. Signed-off-by: Jingoo Han Signed-off-by: Kukjin Kim --- arch/arm/mach-s5pv210/mach-smdkv210.c | 1 + 1 file changed, 1 insertion(+) (limited to 'arch') diff --git a/arch/arm/mach-s5pv210/mach-smdkv210.c b/arch/arm/mach-s5pv210/mach-smdkv210.c index a9106c392398..8662ef6e5681 100644 --- a/arch/arm/mach-s5pv210/mach-smdkv210.c +++ b/arch/arm/mach-s5pv210/mach-smdkv210.c @@ -273,6 +273,7 @@ static struct samsung_bl_gpio_info smdkv210_bl_gpio_info = { static struct platform_pwm_backlight_data smdkv210_bl_data = { .pwm_id = 3, + .pwm_period_ns = 1000, }; static void __init smdkv210_map_io(void) -- cgit v1.2.1 From e248cd5d5f1c28c82781d4122dddd1b7c3d7b46f Mon Sep 17 00:00:00 2001 From: Amit Daniel Kachhap Date: Thu, 8 Dec 2011 10:07:08 +0900 Subject: ARM: EXYNOS: Fix for stall in case of cpu hotplug or sleep This patch adds remove_irq in place of disable_irq which is correct equivalent function for setup_irq used in exynos4_mct_tick_init. Signed-off-by: Amit Daniel Kachhap Tested-by: Inderpal Singh Signed-off-by: Kukjin Kim --- arch/arm/mach-exynos/mct.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/mach-exynos/mct.c b/arch/arm/mach-exynos/mct.c index 97343df8f132..959f2514796c 100644 --- a/arch/arm/mach-exynos/mct.c +++ b/arch/arm/mach-exynos/mct.c @@ -428,9 +428,13 @@ int __cpuinit local_timer_setup(struct clock_event_device *evt) void local_timer_stop(struct clock_event_device *evt) { + unsigned int cpu = smp_processor_id(); evt->set_mode(CLOCK_EVT_MODE_UNUSED, evt); if (mct_int_type == MCT_INT_SPI) - disable_irq(evt->irq); + if (cpu == 0) + remove_irq(evt->irq, &mct_tick0_event_irq); + else + remove_irq(evt->irq, &mct_tick1_event_irq); else disable_percpu_irq(IRQ_MCT_LOCALTIMER); } -- cgit v1.2.1 From 991a6c7d94a9be53f0302a1ada06e66a6ebf51e8 Mon Sep 17 00:00:00 2001 From: Kukjin Kim Date: Thu, 8 Dec 2011 10:04:49 +0900 Subject: ARM: EXYNOS: Fix build error without CONFIG_LOCAL_TIMERS arch/arm/mach-exynos/mct.c: In function 'exynos4_timer_resources': arch/arm/mach-exynos/mct.c:450: error: 'exynos4_mct_tick_isr' undeclared (first use in this function) arch/arm/mach-exynos/mct.c:450: error: (Each undeclared identifier is reported only once arch/arm/mach-exynos/mct.c:450: error: for each function it appears in.) make[1]: *** [arch/arm/mach-exynos/mct.o] Error 1 Reported-by: Kyungmin Park Acked-by: Changhwan Youn Signed-off-by: Kukjin Kim Cc: Marc Zyngier --- arch/arm/mach-exynos/mct.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-exynos/mct.c b/arch/arm/mach-exynos/mct.c index 959f2514796c..85b5527d0918 100644 --- a/arch/arm/mach-exynos/mct.c +++ b/arch/arm/mach-exynos/mct.c @@ -44,8 +44,6 @@ struct mct_clock_event_device { char name[10]; }; -static DEFINE_PER_CPU(struct mct_clock_event_device, percpu_mct_tick); - static void exynos4_mct_write(unsigned int value, void *addr) { void __iomem *stat_addr; @@ -264,6 +262,9 @@ static void exynos4_clockevent_init(void) } #ifdef CONFIG_LOCAL_TIMERS + +static DEFINE_PER_CPU(struct mct_clock_event_device, percpu_mct_tick); + /* Clock event handling */ static void exynos4_mct_tick_stop(struct mct_clock_event_device *mevt) { @@ -447,6 +448,7 @@ static void __init exynos4_timer_resources(void) clk_rate = clk_get_rate(mct_clk); +#ifdef CONFIG_LOCAL_TIMERS if (mct_int_type == MCT_INT_PPI) { int err; @@ -456,6 +458,7 @@ static void __init exynos4_timer_resources(void) WARN(err, "MCT: can't request IRQ %d (%d)\n", IRQ_MCT_LOCALTIMER, err); } +#endif /* CONFIG_LOCAL_TIMERS */ } static void __init exynos4_timer_init(void) -- cgit v1.2.1 From c564a0cb9d0c7f4ac50f1e9ca8bc67fd66cd550f Mon Sep 17 00:00:00 2001 From: "Jett.Zhou" Date: Wed, 30 Nov 2011 14:32:54 +0800 Subject: ARM: sa1100: fix build error arm-eabi-4.4.3-ld:--defsym zreladdr=: syntax error make[2]: *** [arch/arm/boot/compressed/vmlinux] Error 1 make[1]: *** [arch/arm/boot/compressed/vmlinux] Error 2 make: *** [uImage] Error 2 Signed-off-by: Haojian Zhuang Signed-off-by: Jett.Zhou --- arch/arm/mach-sa1100/Makefile.boot | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-sa1100/Makefile.boot b/arch/arm/mach-sa1100/Makefile.boot index 5a616f6e5612..f7951aa04562 100644 --- a/arch/arm/mach-sa1100/Makefile.boot +++ b/arch/arm/mach-sa1100/Makefile.boot @@ -1,5 +1,5 @@ -ifeq ($(CONFIG_ARCH_SA1100),y) - zreladdr-$(CONFIG_SA1111) += 0xc0208000 +ifeq ($(CONFIG_SA1111),y) + zreladdr-y += 0xc0208000 else zreladdr-y += 0xc0008000 endif -- cgit v1.2.1 From 2ded6e6a94c98ea453a156748cb7fabaf39a76b9 Mon Sep 17 00:00:00 2001 From: Mark Langsdorf Date: Fri, 18 Nov 2011 16:33:06 +0100 Subject: x86, hpet: Immediately disable HPET timer 1 if rtc irq is masked When HPET is operating in RTC mode, the TN_ENABLE bit on timer1 controls whether the HPET or the RTC delivers interrupts to irq8. When the system goes into suspend, the RTC driver sends a signal to the HPET driver so that the HPET releases control of irq8, allowing the RTC to wake the system from suspend. The switchover is accomplished by a write to the HPET configuration registers which currently only occurs while servicing the HPET interrupt. On some systems, I have seen the system suspend before an HPET interrupt occurs, preventing the write to the HPET configuration register and leaving the HPET in control of the irq8. As the HPET is not active during suspend, it does not generate a wake signal and RTC alarms do not work. This patch forces the HPET driver to immediately transfer control of the irq8 channel to the RTC instead of waiting until the next interrupt event. Signed-off-by: Mark Langsdorf Link: http://lkml.kernel.org/r/20111118153306.GB16319@alberich.amd.com Tested-by: Andreas Herrmann Signed-off-by: Andreas Herrmann Signed-off-by: Thomas Gleixner Cc: stable@vger.kernel.org --- arch/x86/kernel/hpet.c | 21 ++++++++++++++------- 1 file changed, 14 insertions(+), 7 deletions(-) (limited to 'arch') diff --git a/arch/x86/kernel/hpet.c b/arch/x86/kernel/hpet.c index b946a9eac7d9..1bb0bf4d92cd 100644 --- a/arch/x86/kernel/hpet.c +++ b/arch/x86/kernel/hpet.c @@ -1049,6 +1049,14 @@ int hpet_rtc_timer_init(void) } EXPORT_SYMBOL_GPL(hpet_rtc_timer_init); +static void hpet_disable_rtc_channel(void) +{ + unsigned long cfg; + cfg = hpet_readl(HPET_T1_CFG); + cfg &= ~HPET_TN_ENABLE; + hpet_writel(cfg, HPET_T1_CFG); +} + /* * The functions below are called from rtc driver. * Return 0 if HPET is not being used. @@ -1060,6 +1068,9 @@ int hpet_mask_rtc_irq_bit(unsigned long bit_mask) return 0; hpet_rtc_flags &= ~bit_mask; + if (unlikely(!hpet_rtc_flags)) + hpet_disable_rtc_channel(); + return 1; } EXPORT_SYMBOL_GPL(hpet_mask_rtc_irq_bit); @@ -1125,15 +1136,11 @@ EXPORT_SYMBOL_GPL(hpet_rtc_dropped_irq); static void hpet_rtc_timer_reinit(void) { - unsigned int cfg, delta; + unsigned int delta; int lost_ints = -1; - if (unlikely(!hpet_rtc_flags)) { - cfg = hpet_readl(HPET_T1_CFG); - cfg &= ~HPET_TN_ENABLE; - hpet_writel(cfg, HPET_T1_CFG); - return; - } + if (unlikely(!hpet_rtc_flags)) + hpet_disable_rtc_channel(); if (!(hpet_rtc_flags & RTC_PIE) || hpet_pie_limit) delta = hpet_default_delta; -- cgit v1.2.1 From e8c7106280a305e1ff2a3a8a4dfce141469fb039 Mon Sep 17 00:00:00 2001 From: Matt Fleming Date: Fri, 18 Nov 2011 13:09:11 +0000 Subject: x86, efi: Calling __pa() with an ioremap()ed address is invalid If we encounter an efi_memory_desc_t without EFI_MEMORY_WB set in ->attribute we currently call set_memory_uc(), which in turn calls __pa() on a potentially ioremap'd address. On CONFIG_X86_32 this is invalid, resulting in the following oops on some machines: BUG: unable to handle kernel paging request at f7f22280 IP: [] reserve_ram_pages_type+0x89/0x210 [...] Call Trace: [] ? page_is_ram+0x1a/0x40 [] reserve_memtype+0xdf/0x2f0 [] set_memory_uc+0x49/0xa0 [] efi_enter_virtual_mode+0x1c2/0x3aa [] start_kernel+0x291/0x2f2 [] ? loglevel+0x1b/0x1b [] i386_start_kernel+0xbf/0xc8 A better approach to this problem is to map the memory region with the correct attributes from the start, instead of modifying it after the fact. The uncached case can be handled by ioremap_nocache() and the cached by ioremap_cache(). Despite first impressions, it's not possible to use ioremap_cache() to map all cached memory regions on CONFIG_X86_64 because EFI_RUNTIME_SERVICES_DATA regions really don't like being mapped into the vmalloc space, as detailed in the following bug report, https://bugzilla.redhat.com/show_bug.cgi?id=748516 Therefore, we need to ensure that any EFI_RUNTIME_SERVICES_DATA regions are covered by the direct kernel mapping table on CONFIG_X86_64. To accomplish this we now map E820_RESERVED_EFI regions via the direct kernel mapping with the initial call to init_memory_mapping() in setup_arch(), whereas previously these regions wouldn't be mapped if they were after the last E820_RAM region until efi_ioremap() was called. Doing it this way allows us to delete efi_ioremap() completely. Signed-off-by: Matt Fleming Cc: H. Peter Anvin Cc: Matthew Garrett Cc: Zhang Rui Cc: Huang Ying Cc: Linus Torvalds Cc: Andrew Morton Link: http://lkml.kernel.org/r/1321621751-3650-1-git-send-email-matt@console-pimps.org Signed-off-by: Ingo Molnar --- arch/x86/include/asm/e820.h | 8 ++++++++ arch/x86/include/asm/efi.h | 5 ----- arch/x86/kernel/e820.c | 3 ++- arch/x86/kernel/setup.c | 21 ++++++++++++++++++++- arch/x86/platform/efi/efi.c | 29 ++++++++++++++++++----------- arch/x86/platform/efi/efi_64.c | 17 ----------------- 6 files changed, 48 insertions(+), 35 deletions(-) (limited to 'arch') diff --git a/arch/x86/include/asm/e820.h b/arch/x86/include/asm/e820.h index 908b96957d88..c9547033e38e 100644 --- a/arch/x86/include/asm/e820.h +++ b/arch/x86/include/asm/e820.h @@ -53,6 +53,13 @@ */ #define E820_RESERVED_KERN 128 +/* + * Address ranges that need to be mapped by the kernel direct + * mapping. This is used to make sure regions such as + * EFI_RUNTIME_SERVICES_DATA are directly mapped. See setup_arch(). + */ +#define E820_RESERVED_EFI 129 + #ifndef __ASSEMBLY__ #include struct e820entry { @@ -115,6 +122,7 @@ static inline void early_memtest(unsigned long start, unsigned long end) } #endif +extern unsigned long e820_end_pfn(unsigned long limit_pfn, unsigned type); extern unsigned long e820_end_of_ram_pfn(void); extern unsigned long e820_end_of_low_ram_pfn(void); extern u64 early_reserve_e820(u64 startt, u64 sizet, u64 align); diff --git a/arch/x86/include/asm/efi.h b/arch/x86/include/asm/efi.h index 7093e4a6a0bc..b8d8bfcd44a9 100644 --- a/arch/x86/include/asm/efi.h +++ b/arch/x86/include/asm/efi.h @@ -33,8 +33,6 @@ extern unsigned long asmlinkage efi_call_phys(void *, ...); #define efi_call_virt6(f, a1, a2, a3, a4, a5, a6) \ efi_call_virt(f, a1, a2, a3, a4, a5, a6) -#define efi_ioremap(addr, size, type) ioremap_cache(addr, size) - #else /* !CONFIG_X86_32 */ extern u64 efi_call0(void *fp); @@ -84,9 +82,6 @@ extern u64 efi_call6(void *fp, u64 arg1, u64 arg2, u64 arg3, efi_call6((void *)(efi.systab->runtime->f), (u64)(a1), (u64)(a2), \ (u64)(a3), (u64)(a4), (u64)(a5), (u64)(a6)) -extern void __iomem *efi_ioremap(unsigned long addr, unsigned long size, - u32 type); - #endif /* CONFIG_X86_32 */ extern int add_efi_memmap; diff --git a/arch/x86/kernel/e820.c b/arch/x86/kernel/e820.c index 303a0e48f076..65ffd110a81b 100644 --- a/arch/x86/kernel/e820.c +++ b/arch/x86/kernel/e820.c @@ -135,6 +135,7 @@ static void __init e820_print_type(u32 type) printk(KERN_CONT "(usable)"); break; case E820_RESERVED: + case E820_RESERVED_EFI: printk(KERN_CONT "(reserved)"); break; case E820_ACPI: @@ -783,7 +784,7 @@ u64 __init early_reserve_e820(u64 startt, u64 sizet, u64 align) /* * Find the highest page frame number we have available */ -static unsigned long __init e820_end_pfn(unsigned long limit_pfn, unsigned type) +unsigned long __init e820_end_pfn(unsigned long limit_pfn, unsigned type) { int i; unsigned long last_pfn = 0; diff --git a/arch/x86/kernel/setup.c b/arch/x86/kernel/setup.c index cf0ef986cb6d..9a9e40fb091c 100644 --- a/arch/x86/kernel/setup.c +++ b/arch/x86/kernel/setup.c @@ -691,6 +691,8 @@ early_param("reservelow", parse_reservelow); void __init setup_arch(char **cmdline_p) { + unsigned long end_pfn; + #ifdef CONFIG_X86_32 memcpy(&boot_cpu_data, &new_cpu_data, sizeof(new_cpu_data)); visws_early_detect(); @@ -932,7 +934,24 @@ void __init setup_arch(char **cmdline_p) init_gbpages(); /* max_pfn_mapped is updated here */ - max_low_pfn_mapped = init_memory_mapping(0, max_low_pfn<>PAGE_SHIFT, E820_RESERVED_EFI); + if (efi_end > max_low_pfn) + end_pfn = efi_end; + } +#endif + + max_low_pfn_mapped = init_memory_mapping(0, end_pfn << PAGE_SHIFT); max_pfn_mapped = max_low_pfn_mapped; #ifdef CONFIG_X86_64 diff --git a/arch/x86/platform/efi/efi.c b/arch/x86/platform/efi/efi.c index 37718f0f053d..c9718a16be15 100644 --- a/arch/x86/platform/efi/efi.c +++ b/arch/x86/platform/efi/efi.c @@ -323,10 +323,13 @@ static void __init do_add_efi_memmap(void) case EFI_UNUSABLE_MEMORY: e820_type = E820_UNUSABLE; break; + case EFI_RUNTIME_SERVICES_DATA: + e820_type = E820_RESERVED_EFI; + break; default: /* * EFI_RESERVED_TYPE EFI_RUNTIME_SERVICES_CODE - * EFI_RUNTIME_SERVICES_DATA EFI_MEMORY_MAPPED_IO + * EFI_MEMORY_MAPPED_IO * EFI_MEMORY_MAPPED_IO_PORT_SPACE EFI_PAL_CODE */ e820_type = E820_RESERVED; @@ -671,10 +674,21 @@ void __init efi_enter_virtual_mode(void) end_pfn = PFN_UP(end); if (end_pfn <= max_low_pfn_mapped || (end_pfn > (1UL << (32 - PAGE_SHIFT)) - && end_pfn <= max_pfn_mapped)) + && end_pfn <= max_pfn_mapped)) { va = __va(md->phys_addr); - else - va = efi_ioremap(md->phys_addr, size, md->type); + + if (!(md->attribute & EFI_MEMORY_WB)) { + addr = (u64) (unsigned long)va; + npages = md->num_pages; + memrange_efi_to_native(&addr, &npages); + set_memory_uc(addr, npages); + } + } else { + if (!(md->attribute & EFI_MEMORY_WB)) + va = ioremap_nocache(md->phys_addr, size); + else + va = ioremap_cache(md->phys_addr, size); + } md->virt_addr = (u64) (unsigned long) va; @@ -684,13 +698,6 @@ void __init efi_enter_virtual_mode(void) continue; } - if (!(md->attribute & EFI_MEMORY_WB)) { - addr = md->virt_addr; - npages = md->num_pages; - memrange_efi_to_native(&addr, &npages); - set_memory_uc(addr, npages); - } - systab = (u64) (unsigned long) efi_phys.systab; if (md->phys_addr <= systab && systab < end) { systab += md->virt_addr - md->phys_addr; diff --git a/arch/x86/platform/efi/efi_64.c b/arch/x86/platform/efi/efi_64.c index ac3aa54e2654..312250c6b2de 100644 --- a/arch/x86/platform/efi/efi_64.c +++ b/arch/x86/platform/efi/efi_64.c @@ -80,20 +80,3 @@ void __init efi_call_phys_epilog(void) local_irq_restore(efi_flags); early_code_mapping_set_exec(0); } - -void __iomem *__init efi_ioremap(unsigned long phys_addr, unsigned long size, - u32 type) -{ - unsigned long last_map_pfn; - - if (type == EFI_MEMORY_MAPPED_IO) - return ioremap(phys_addr, size); - - last_map_pfn = init_memory_mapping(phys_addr, phys_addr + size); - if ((last_map_pfn << PAGE_SHIFT) < phys_addr + size) { - unsigned long top = last_map_pfn << PAGE_SHIFT; - efi_ioremap(top, size - (top - phys_addr), type); - } - - return (void __iomem *)__va(phys_addr); -} -- cgit v1.2.1 From c0d96aed8c6dd925afe9ea35491a0cd458642a86 Mon Sep 17 00:00:00 2001 From: Jason Chen Date: Wed, 30 Nov 2011 11:34:27 +0800 Subject: MXC PWM: should active during DOZE/WAIT/DBG mode Signed-off-by: Jason Chen Signed-off-by: Sascha Hauer Cc: stable@kernel.org --- arch/arm/plat-mxc/pwm.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/plat-mxc/pwm.c b/arch/arm/plat-mxc/pwm.c index 42d74ea59084..845de59f07ed 100644 --- a/arch/arm/plat-mxc/pwm.c +++ b/arch/arm/plat-mxc/pwm.c @@ -32,6 +32,9 @@ #define MX3_PWMSAR 0x0C /* PWM Sample Register */ #define MX3_PWMPR 0x10 /* PWM Period Register */ #define MX3_PWMCR_PRESCALER(x) (((x - 1) & 0xFFF) << 4) +#define MX3_PWMCR_DOZEEN (1 << 24) +#define MX3_PWMCR_WAITEN (1 << 23) +#define MX3_PWMCR_DBGEN (1 << 22) #define MX3_PWMCR_CLKSRC_IPG_HIGH (2 << 16) #define MX3_PWMCR_CLKSRC_IPG (1 << 16) #define MX3_PWMCR_EN (1 << 0) @@ -77,7 +80,9 @@ int pwm_config(struct pwm_device *pwm, int duty_ns, int period_ns) writel(duty_cycles, pwm->mmio_base + MX3_PWMSAR); writel(period_cycles, pwm->mmio_base + MX3_PWMPR); - cr = MX3_PWMCR_PRESCALER(prescale) | MX3_PWMCR_EN; + cr = MX3_PWMCR_PRESCALER(prescale) | + MX3_PWMCR_DOZEEN | MX3_PWMCR_WAITEN | + MX3_PWMCR_DBGEN | MX3_PWMCR_EN; if (cpu_is_mx25()) cr |= MX3_PWMCR_CLKSRC_IPG; -- cgit v1.2.1 From 16b3647d333a18141fc9d172e89a142250be0c57 Mon Sep 17 00:00:00 2001 From: Dong Aisheng Date: Sat, 12 Nov 2011 00:09:06 +0800 Subject: ARM: mx5: add __initconst for fec pdata MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Signed-off-by: Dong Aisheng Acked-by: Uwe Kleine-König Signed-off-by: Sascha Hauer --- arch/arm/mach-mx5/board-mx53_evk.c | 2 +- arch/arm/mach-mx5/board-mx53_loco.c | 2 +- arch/arm/mach-mx5/board-mx53_smd.c | 2 +- 3 files changed, 3 insertions(+), 3 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-mx5/board-mx53_evk.c b/arch/arm/mach-mx5/board-mx53_evk.c index 6bea31ab8f85..64bbfcea6f35 100644 --- a/arch/arm/mach-mx5/board-mx53_evk.c +++ b/arch/arm/mach-mx5/board-mx53_evk.c @@ -106,7 +106,7 @@ static inline void mx53_evk_fec_reset(void) gpio_set_value(MX53_EVK_FEC_PHY_RST, 1); } -static struct fec_platform_data mx53_evk_fec_pdata = { +static const struct fec_platform_data mx53_evk_fec_pdata __initconst = { .phy = PHY_INTERFACE_MODE_RMII, }; diff --git a/arch/arm/mach-mx5/board-mx53_loco.c b/arch/arm/mach-mx5/board-mx53_loco.c index 7678f7734db6..237bdecd9331 100644 --- a/arch/arm/mach-mx5/board-mx53_loco.c +++ b/arch/arm/mach-mx5/board-mx53_loco.c @@ -242,7 +242,7 @@ static inline void mx53_loco_fec_reset(void) gpio_set_value(LOCO_FEC_PHY_RST, 1); } -static struct fec_platform_data mx53_loco_fec_data = { +static const struct fec_platform_data mx53_loco_fec_data __initconst = { .phy = PHY_INTERFACE_MODE_RMII, }; diff --git a/arch/arm/mach-mx5/board-mx53_smd.c b/arch/arm/mach-mx5/board-mx53_smd.c index 59c0845eb4a6..d42132a80e8f 100644 --- a/arch/arm/mach-mx5/board-mx53_smd.c +++ b/arch/arm/mach-mx5/board-mx53_smd.c @@ -104,7 +104,7 @@ static inline void mx53_smd_fec_reset(void) gpio_set_value(SMD_FEC_PHY_RST, 1); } -static struct fec_platform_data mx53_smd_fec_data = { +static const struct fec_platform_data mx53_smd_fec_data __initconst = { .phy = PHY_INTERFACE_MODE_RMII, }; -- cgit v1.2.1 From 300a47b4378a3b2e7c2a423b0aa4d75fc78987d3 Mon Sep 17 00:00:00 2001 From: Richard Zhao Date: Fri, 9 Dec 2011 10:46:21 +0800 Subject: ARM: imx: fix cpufreq build errors CC arch/arm/plat-mxc/cpufreq.o arch/arm/plat-mxc/cpufreq.c:203: error: expected declaration specifiers or '...' before string constant arch/arm/plat-mxc/cpufreq.c:203: warning: data definition has no type or storage class arch/arm/plat-mxc/cpufreq.c:203: warning: type defaults to 'int' in declaration of 'MODULE_AUTHOR' arch/arm/plat-mxc/cpufreq.c:203: warning: function declaration isn't a prototype arch/arm/plat-mxc/cpufreq.c:204: error: expected declaration specifiers or '...' before string constant arch/arm/plat-mxc/cpufreq.c:204: warning: data definition has no type or storage class arch/arm/plat-mxc/cpufreq.c:204: warning: type defaults to 'int' in declaration of 'MODULE_DESCRIPTION' arch/arm/plat-mxc/cpufreq.c:204: warning: function declaration isn't a prototype arch/arm/plat-mxc/cpufreq.c:205: error: expected declaration specifiers or '...' before string constant arch/arm/plat-mxc/cpufreq.c:205: warning: data definition has no type or storage class arch/arm/plat-mxc/cpufreq.c:205: warning: type defaults to 'int' in declaration of 'MODULE_LICENSE' arch/arm/plat-mxc/cpufreq.c:205: warning: function declaration isn't a prototype make[1]: *** [arch/arm/plat-mxc/cpufreq.o] Error 1 make: *** [arch/arm/plat-mxc] Error 2 Signed-off-by: Richard Zhao Signed-off-by: Richard Zhao Signed-off-by: Sascha Hauer --- arch/arm/plat-mxc/cpufreq.c | 1 + 1 file changed, 1 insertion(+) (limited to 'arch') diff --git a/arch/arm/plat-mxc/cpufreq.c b/arch/arm/plat-mxc/cpufreq.c index 74aac96cda20..adbff706ef6f 100644 --- a/arch/arm/plat-mxc/cpufreq.c +++ b/arch/arm/plat-mxc/cpufreq.c @@ -17,6 +17,7 @@ * the CPU clock speed on the fly. */ +#include #include #include #include -- cgit v1.2.1 From 847a2ee7392e7d3278f9b82c4b503744c72ee463 Mon Sep 17 00:00:00 2001 From: Shawn Guo Date: Mon, 5 Dec 2011 10:28:11 +0800 Subject: arm/imx: fix power button on imx51 babbage board Since commit 6571534 (plat-mxc: iomux-v3.h: implicitly enable pull-up/down when that's desired) was in, the power button on imx51 babbage board stopped working because it's pulled up by mistake. The patch removes the pull-up setting from the pad configuration for that gpio to make the power button back to work. Signed-off-by: Shawn Guo Signed-off-by: Sascha Hauer --- arch/arm/mach-mx5/board-mx51_babbage.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/mach-mx5/board-mx51_babbage.c b/arch/arm/mach-mx5/board-mx51_babbage.c index 5c837603ff0f..24994bb52147 100644 --- a/arch/arm/mach-mx5/board-mx51_babbage.c +++ b/arch/arm/mach-mx5/board-mx51_babbage.c @@ -362,7 +362,7 @@ static void __init mx51_babbage_init(void) { iomux_v3_cfg_t usbh1stp = MX51_PAD_USBH1_STP__USBH1_STP; iomux_v3_cfg_t power_key = NEW_PAD_CTRL(MX51_PAD_EIM_A27__GPIO2_21, - PAD_CTL_SRE_FAST | PAD_CTL_DSE_HIGH | PAD_CTL_PUS_100K_UP); + PAD_CTL_SRE_FAST | PAD_CTL_DSE_HIGH); imx51_soc_init(); -- cgit v1.2.1 From b6999b19120931ede364fa3b685e698a61fed31d Mon Sep 17 00:00:00 2001 From: Youquan Song Date: Thu, 8 Dec 2011 14:34:16 -0800 Subject: thp: add compound tail page _mapcount when mapped With the 3.2-rc kernel, IOMMU 2M pages in KVM works. But when I tried to use IOMMU 1GB pages in KVM, I encountered an oops and the 1GB page failed to be used. The root cause is that 1GB page allocation calls gup_huge_pud() while 2M page calls gup_huge_pmd. If compound pages are used and the page is a tail page, gup_huge_pmd() increases _mapcount to record tail page are mapped while gup_huge_pud does not do that. So when the mapped page is relesed, it will result in kernel oops because the page is not marked mapped. This patch add tail process for compound page in 1GB huge page which keeps the same process as 2M page. Reproduce like: 1. Add grub boot option: hugepagesz=1G hugepages=8 2. mount -t hugetlbfs -o pagesize=1G hugetlbfs /dev/hugepages 3. qemu-kvm -m 2048 -hda os-kvm.img -cpu kvm64 -smp 4 -mem-path /dev/hugepages -net none -device pci-assign,host=07:00.1 kernel BUG at mm/swap.c:114! invalid opcode: 0000 [#1] SMP Call Trace: put_page+0x15/0x37 kvm_release_pfn_clean+0x31/0x36 kvm_iommu_put_pages+0x94/0xb1 kvm_iommu_unmap_memslots+0x80/0xb6 kvm_assign_device+0xba/0x117 kvm_vm_ioctl_assigned_device+0x301/0xa47 kvm_vm_ioctl+0x36c/0x3a2 do_vfs_ioctl+0x49e/0x4e4 sys_ioctl+0x5a/0x7c system_call_fastpath+0x16/0x1b RIP put_compound_page+0xd4/0x168 Signed-off-by: Youquan Song Reviewed-by: Andrea Arcangeli Cc: Andi Kleen Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/x86/mm/gup.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'arch') diff --git a/arch/x86/mm/gup.c b/arch/x86/mm/gup.c index ea305856151c..dd74e46828c0 100644 --- a/arch/x86/mm/gup.c +++ b/arch/x86/mm/gup.c @@ -201,6 +201,8 @@ static noinline int gup_huge_pud(pud_t pud, unsigned long addr, do { VM_BUG_ON(compound_head(page) != head); pages[*nr] = page; + if (PageTail(page)) + get_huge_page_tail(page); (*nr)++; page++; refs++; -- cgit v1.2.1 From 6d3e32e63f1fb47b3ba104d13dfac116df7b2bbb Mon Sep 17 00:00:00 2001 From: Matt Fleming Date: Thu, 8 Dec 2011 12:10:50 +0000 Subject: x86, efi: Make efi_call_phys_{prelog,epilog} CONFIG_RELOCATABLE-aware efi_call_phys_prelog() sets up a 1:1 mapping of the physical address range in swapper_pg_dir. Instead of replacing then restoring entries in swapper_pg_dir we should be using initial_page_table which already contains the 1:1 mapping. It's safe to blindly switch back to swapper_pg_dir in the epilog because the physical EFI routines are only called before efi_enter_virtual_mode(), e.g. before any user processes have been forked. Therefore, we don't need to track which pgd was in %cr3 when we entered the prelog. The previous code actually contained a bug because it assumed that the kernel was loaded at a physical address within the first 8MB of ram, usually at 0x100000. However, this isn't the case with a CONFIG_RELOCATABLE=y kernel which could have been loaded anywhere in the physical address space. Also delete the ancient (and bogus) comments about the page table being restored after the lock is released. There is no locking. Cc: Matthew Garrett Cc: Darrent Hart Signed-off-by: Matt Fleming Link: http://lkml.kernel.org/r/1323346250.3894.74.camel@mfleming-mobl1.ger.corp.intel.com Signed-off-by: H. Peter Anvin --- arch/x86/platform/efi/efi_32.c | 48 ++---------------------------------------- 1 file changed, 2 insertions(+), 46 deletions(-) (limited to 'arch') diff --git a/arch/x86/platform/efi/efi_32.c b/arch/x86/platform/efi/efi_32.c index e36bf714cb77..40e446941dd7 100644 --- a/arch/x86/platform/efi/efi_32.c +++ b/arch/x86/platform/efi/efi_32.c @@ -39,43 +39,14 @@ */ static unsigned long efi_rt_eflags; -static pgd_t efi_bak_pg_dir_pointer[2]; void efi_call_phys_prelog(void) { - unsigned long cr4; - unsigned long temp; struct desc_ptr gdt_descr; local_irq_save(efi_rt_eflags); - /* - * If I don't have PAE, I should just duplicate two entries in page - * directory. If I have PAE, I just need to duplicate one entry in - * page directory. - */ - cr4 = read_cr4_safe(); - - if (cr4 & X86_CR4_PAE) { - efi_bak_pg_dir_pointer[0].pgd = - swapper_pg_dir[pgd_index(0)].pgd; - swapper_pg_dir[0].pgd = - swapper_pg_dir[pgd_index(PAGE_OFFSET)].pgd; - } else { - efi_bak_pg_dir_pointer[0].pgd = - swapper_pg_dir[pgd_index(0)].pgd; - efi_bak_pg_dir_pointer[1].pgd = - swapper_pg_dir[pgd_index(0x400000)].pgd; - swapper_pg_dir[pgd_index(0)].pgd = - swapper_pg_dir[pgd_index(PAGE_OFFSET)].pgd; - temp = PAGE_OFFSET + 0x400000; - swapper_pg_dir[pgd_index(0x400000)].pgd = - swapper_pg_dir[pgd_index(temp)].pgd; - } - - /* - * After the lock is released, the original page table is restored. - */ + load_cr3(initial_page_table); __flush_tlb_all(); gdt_descr.address = __pa(get_cpu_gdt_table(0)); @@ -85,28 +56,13 @@ void efi_call_phys_prelog(void) void efi_call_phys_epilog(void) { - unsigned long cr4; struct desc_ptr gdt_descr; gdt_descr.address = (unsigned long)get_cpu_gdt_table(0); gdt_descr.size = GDT_SIZE - 1; load_gdt(&gdt_descr); - cr4 = read_cr4_safe(); - - if (cr4 & X86_CR4_PAE) { - swapper_pg_dir[pgd_index(0)].pgd = - efi_bak_pg_dir_pointer[0].pgd; - } else { - swapper_pg_dir[pgd_index(0)].pgd = - efi_bak_pg_dir_pointer[0].pgd; - swapper_pg_dir[pgd_index(0x400000)].pgd = - efi_bak_pg_dir_pointer[1].pgd; - } - - /* - * After the lock is released, the original page table is restored. - */ + load_cr3(swapper_pg_dir); __flush_tlb_all(); local_irq_restore(efi_rt_eflags); -- cgit v1.2.1 From 9811ccdfa94b4773c8030569bd8ec75eafa485ac Mon Sep 17 00:00:00 2001 From: Arnaud Patard Date: Sun, 11 Dec 2011 20:32:25 +0100 Subject: ARM: 7204/1: arch/arm/kernel/setup.c: initialize arm_dma_zone_size earlier arm_dma_zone_size is used by arm_bootmem_free() which is called by paging_init(). Thus it needs to be set before calling it. Signed-off-by: Arnaud Patard Acked-by: Nicolas Pitre Cc: stable@kernel.org Signed-off-by: Russell King --- arch/arm/kernel/setup.c | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) (limited to 'arch') diff --git a/arch/arm/kernel/setup.c b/arch/arm/kernel/setup.c index 1bdd0adbb7dd..8fc2c8fcbdc6 100644 --- a/arch/arm/kernel/setup.c +++ b/arch/arm/kernel/setup.c @@ -902,6 +902,12 @@ void __init setup_arch(char **cmdline_p) machine_desc = mdesc; machine_name = mdesc->name; +#ifdef CONFIG_ZONE_DMA + if (mdesc->dma_zone_size) { + extern unsigned long arm_dma_zone_size; + arm_dma_zone_size = mdesc->dma_zone_size; + } +#endif if (mdesc->soft_reboot) reboot_setup("s"); @@ -932,12 +938,6 @@ void __init setup_arch(char **cmdline_p) tcm_init(); -#ifdef CONFIG_ZONE_DMA - if (mdesc->dma_zone_size) { - extern unsigned long arm_dma_zone_size; - arm_dma_zone_size = mdesc->dma_zone_size; - } -#endif #ifdef CONFIG_MULTI_IRQ_HANDLER handle_arch_irq = mdesc->handle_irq; #endif -- cgit v1.2.1 From e1ad783b12ec8b69da83479c5d21a0d8180bc519 Mon Sep 17 00:00:00 2001 From: Keith Packard Date: Sun, 11 Dec 2011 16:12:42 -0800 Subject: Revert "x86, efi: Calling __pa() with an ioremap()ed address is invalid" This hangs my MacBook Air at boot time; I get no console messages at all. I reverted this on top of -rc5 and my machine boots again. This reverts commit e8c7106280a305e1ff2a3a8a4dfce141469fb039. Signed-off-by: Matt Fleming Signed-off-by: Keith Packard Acked-by: H. Peter Anvin Cc: Matthew Garrett Cc: Zhang Rui Cc: Huang Ying Cc: Linus Torvalds Cc: Andrew Morton Link: http://lkml.kernel.org/r/1321621751-3650-1-git-send-email-matt@console Signed-off-by: Ingo Molnar --- arch/x86/include/asm/e820.h | 8 -------- arch/x86/include/asm/efi.h | 5 +++++ arch/x86/kernel/e820.c | 3 +-- arch/x86/kernel/setup.c | 21 +-------------------- arch/x86/platform/efi/efi.c | 29 +++++++++++------------------ arch/x86/platform/efi/efi_64.c | 17 +++++++++++++++++ 6 files changed, 35 insertions(+), 48 deletions(-) (limited to 'arch') diff --git a/arch/x86/include/asm/e820.h b/arch/x86/include/asm/e820.h index c9547033e38e..908b96957d88 100644 --- a/arch/x86/include/asm/e820.h +++ b/arch/x86/include/asm/e820.h @@ -53,13 +53,6 @@ */ #define E820_RESERVED_KERN 128 -/* - * Address ranges that need to be mapped by the kernel direct - * mapping. This is used to make sure regions such as - * EFI_RUNTIME_SERVICES_DATA are directly mapped. See setup_arch(). - */ -#define E820_RESERVED_EFI 129 - #ifndef __ASSEMBLY__ #include struct e820entry { @@ -122,7 +115,6 @@ static inline void early_memtest(unsigned long start, unsigned long end) } #endif -extern unsigned long e820_end_pfn(unsigned long limit_pfn, unsigned type); extern unsigned long e820_end_of_ram_pfn(void); extern unsigned long e820_end_of_low_ram_pfn(void); extern u64 early_reserve_e820(u64 startt, u64 sizet, u64 align); diff --git a/arch/x86/include/asm/efi.h b/arch/x86/include/asm/efi.h index b8d8bfcd44a9..7093e4a6a0bc 100644 --- a/arch/x86/include/asm/efi.h +++ b/arch/x86/include/asm/efi.h @@ -33,6 +33,8 @@ extern unsigned long asmlinkage efi_call_phys(void *, ...); #define efi_call_virt6(f, a1, a2, a3, a4, a5, a6) \ efi_call_virt(f, a1, a2, a3, a4, a5, a6) +#define efi_ioremap(addr, size, type) ioremap_cache(addr, size) + #else /* !CONFIG_X86_32 */ extern u64 efi_call0(void *fp); @@ -82,6 +84,9 @@ extern u64 efi_call6(void *fp, u64 arg1, u64 arg2, u64 arg3, efi_call6((void *)(efi.systab->runtime->f), (u64)(a1), (u64)(a2), \ (u64)(a3), (u64)(a4), (u64)(a5), (u64)(a6)) +extern void __iomem *efi_ioremap(unsigned long addr, unsigned long size, + u32 type); + #endif /* CONFIG_X86_32 */ extern int add_efi_memmap; diff --git a/arch/x86/kernel/e820.c b/arch/x86/kernel/e820.c index 65ffd110a81b..303a0e48f076 100644 --- a/arch/x86/kernel/e820.c +++ b/arch/x86/kernel/e820.c @@ -135,7 +135,6 @@ static void __init e820_print_type(u32 type) printk(KERN_CONT "(usable)"); break; case E820_RESERVED: - case E820_RESERVED_EFI: printk(KERN_CONT "(reserved)"); break; case E820_ACPI: @@ -784,7 +783,7 @@ u64 __init early_reserve_e820(u64 startt, u64 sizet, u64 align) /* * Find the highest page frame number we have available */ -unsigned long __init e820_end_pfn(unsigned long limit_pfn, unsigned type) +static unsigned long __init e820_end_pfn(unsigned long limit_pfn, unsigned type) { int i; unsigned long last_pfn = 0; diff --git a/arch/x86/kernel/setup.c b/arch/x86/kernel/setup.c index 9a9e40fb091c..cf0ef986cb6d 100644 --- a/arch/x86/kernel/setup.c +++ b/arch/x86/kernel/setup.c @@ -691,8 +691,6 @@ early_param("reservelow", parse_reservelow); void __init setup_arch(char **cmdline_p) { - unsigned long end_pfn; - #ifdef CONFIG_X86_32 memcpy(&boot_cpu_data, &new_cpu_data, sizeof(new_cpu_data)); visws_early_detect(); @@ -934,24 +932,7 @@ void __init setup_arch(char **cmdline_p) init_gbpages(); /* max_pfn_mapped is updated here */ - end_pfn = max_low_pfn; - -#ifdef CONFIG_X86_64 - /* - * There may be regions after the last E820_RAM region that we - * want to include in the kernel direct mapping, such as - * EFI_RUNTIME_SERVICES_DATA. - */ - if (efi_enabled) { - unsigned long efi_end; - - efi_end = e820_end_pfn(MAXMEM>>PAGE_SHIFT, E820_RESERVED_EFI); - if (efi_end > max_low_pfn) - end_pfn = efi_end; - } -#endif - - max_low_pfn_mapped = init_memory_mapping(0, end_pfn << PAGE_SHIFT); + max_low_pfn_mapped = init_memory_mapping(0, max_low_pfn< (1UL << (32 - PAGE_SHIFT)) - && end_pfn <= max_pfn_mapped)) { + && end_pfn <= max_pfn_mapped)) va = __va(md->phys_addr); - - if (!(md->attribute & EFI_MEMORY_WB)) { - addr = (u64) (unsigned long)va; - npages = md->num_pages; - memrange_efi_to_native(&addr, &npages); - set_memory_uc(addr, npages); - } - } else { - if (!(md->attribute & EFI_MEMORY_WB)) - va = ioremap_nocache(md->phys_addr, size); - else - va = ioremap_cache(md->phys_addr, size); - } + else + va = efi_ioremap(md->phys_addr, size, md->type); md->virt_addr = (u64) (unsigned long) va; @@ -698,6 +684,13 @@ void __init efi_enter_virtual_mode(void) continue; } + if (!(md->attribute & EFI_MEMORY_WB)) { + addr = md->virt_addr; + npages = md->num_pages; + memrange_efi_to_native(&addr, &npages); + set_memory_uc(addr, npages); + } + systab = (u64) (unsigned long) efi_phys.systab; if (md->phys_addr <= systab && systab < end) { systab += md->virt_addr - md->phys_addr; diff --git a/arch/x86/platform/efi/efi_64.c b/arch/x86/platform/efi/efi_64.c index 312250c6b2de..ac3aa54e2654 100644 --- a/arch/x86/platform/efi/efi_64.c +++ b/arch/x86/platform/efi/efi_64.c @@ -80,3 +80,20 @@ void __init efi_call_phys_epilog(void) local_irq_restore(efi_flags); early_code_mapping_set_exec(0); } + +void __iomem *__init efi_ioremap(unsigned long phys_addr, unsigned long size, + u32 type) +{ + unsigned long last_map_pfn; + + if (type == EFI_MEMORY_MAPPED_IO) + return ioremap(phys_addr, size); + + last_map_pfn = init_memory_mapping(phys_addr, phys_addr + size); + if ((last_map_pfn << PAGE_SHIFT) < phys_addr + size) { + unsigned long top = last_map_pfn << PAGE_SHIFT; + efi_ioremap(top, size - (top - phys_addr), type); + } + + return (void __iomem *)__va(phys_addr); +} -- cgit v1.2.1 From 0c8551e5fa3833c6080542da662394817fea4616 Mon Sep 17 00:00:00 2001 From: Jarkko Nikula Date: Mon, 12 Dec 2011 10:38:26 +0200 Subject: ARM: OMAP: mcbsp: Fix possible memory corruption Commits 09d28d ("ARM: OMAP: mcbsp: Start generalize omap2_mcbsp_set_clks_src") and 7bc0c4 ("ARM: OMAP: mcbsp: Start generalize signal muxing functions") incorrectly set two struct omap_mcbsp_platform_data fields after omap_device_build_ss and kfree calls. Fix this by moving these pdata assignments before those calls. Signed-off-by: Jarkko Nikula Reported-by: NeilBrown Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/mcbsp.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-omap2/mcbsp.c b/arch/arm/mach-omap2/mcbsp.c index 292eee3be15f..28fcb27005d2 100644 --- a/arch/arm/mach-omap2/mcbsp.c +++ b/arch/arm/mach-omap2/mcbsp.c @@ -145,6 +145,9 @@ static int omap_init_mcbsp(struct omap_hwmod *oh, void *unused) pdata->reg_size = 4; pdata->has_ccr = true; } + pdata->set_clk_src = omap2_mcbsp_set_clk_src; + if (id == 1) + pdata->mux_signal = omap2_mcbsp1_mux_rx_clk; if (oh->class->rev == MCBSP_CONFIG_TYPE3) { if (id == 2) @@ -174,9 +177,6 @@ static int omap_init_mcbsp(struct omap_hwmod *oh, void *unused) name, oh->name); return PTR_ERR(pdev); } - pdata->set_clk_src = omap2_mcbsp_set_clk_src; - if (id == 1) - pdata->mux_signal = omap2_mcbsp1_mux_rx_clk; omap_mcbsp_count++; return 0; } -- cgit v1.2.1 From e5fe29c7198a1f6616286dfc8602a69da165cb3f Mon Sep 17 00:00:00 2001 From: Felipe Contreras Date: Thu, 8 Dec 2011 22:23:00 +0200 Subject: ARM: OMAP: rx51: fix USB Commit 10299e2e4e3ed3b16503d4e04edd48b33083f4e2 (ARM: RX-51: Enable isp1704 power on/off) added power management for isp1704. However, the transceiver should be powered on by default, otherwise USB doesn't work at all for networking during boot. All kernels after v3.0 are affected. Cc: stable@kernel.org Signed-off-by: Felipe Contreras Reviewed-by: Sebastian Reichel [tony@atomide.com: updated comments] Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/board-rx51-peripherals.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/mach-omap2/board-rx51-peripherals.c b/arch/arm/mach-omap2/board-rx51-peripherals.c index ba1aa07bdb29..c15c5c9c9085 100644 --- a/arch/arm/mach-omap2/board-rx51-peripherals.c +++ b/arch/arm/mach-omap2/board-rx51-peripherals.c @@ -193,7 +193,7 @@ static struct platform_device rx51_charger_device = { static void __init rx51_charger_init(void) { WARN_ON(gpio_request_one(RX51_USB_TRANSCEIVER_RST_GPIO, - GPIOF_OUT_INIT_LOW, "isp1704_reset")); + GPIOF_OUT_INIT_HIGH, "isp1704_reset")); platform_device_register(&rx51_charger_device); } -- cgit v1.2.1 From b1f44e13a525d2ffb7d5afe2273b7169d6f2222e Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Wed, 14 Dec 2011 10:05:22 -0800 Subject: sparc32: Be less strict in matching %lo part of relocation. The "(insn & 0x01800000) != 0x01800000" test matches 'restore' but that is a legitimate place to see the %lo() part of a 32-bit symbol relocation, particularly in tail calls. Signed-off-by: David S. Miller Tested-by: Sergei Trofimovich --- arch/sparc/mm/btfixup.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/sparc/mm/btfixup.c b/arch/sparc/mm/btfixup.c index 5175ac2f4820..8a7f81743c12 100644 --- a/arch/sparc/mm/btfixup.c +++ b/arch/sparc/mm/btfixup.c @@ -302,8 +302,7 @@ void __init btfixup(void) case 'i': /* INT */ if ((insn & 0xc1c00000) == 0x01000000) /* %HI */ set_addr(addr, q[1], fmangled, (insn & 0xffc00000) | (p[1] >> 10)); - else if ((insn & 0x80002000) == 0x80002000 && - (insn & 0x01800000) != 0x01800000) /* %LO */ + else if ((insn & 0x80002000) == 0x80002000) /* %LO */ set_addr(addr, q[1], fmangled, (insn & 0xffffe000) | (p[1] & 0x3ff)); else { prom_printf(insn_i, p, addr, insn); -- cgit v1.2.1 From d3db728125c4470a2d061ac10fa7395e18237263 Mon Sep 17 00:00:00 2001 From: Ian Campbell Date: Wed, 14 Dec 2011 12:16:08 +0000 Subject: xen: only limit memory map to maximum reservation for domain 0. d312ae878b6a "xen: use maximum reservation to limit amount of usable RAM" clamped the total amount of RAM to the current maximum reservation. This is correct for dom0 but is not correct for guest domains. In order to boot a guest "pre-ballooned" (e.g. with memory=1G but maxmem=2G) in order to allow for future memory expansion the guest must derive max_pfn from the e820 provided by the toolstack and not the current maximum reservation (which can reflect only the current maximum, not the guest lifetime max). The existing algorithm already behaves this correctly if we do not artificially limit the maximum number of pages for the guest case. For a guest booted with maxmem=512, memory=128 this results in: [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] Xen: 0000000000000000 - 00000000000a0000 (usable) [ 0.000000] Xen: 00000000000a0000 - 0000000000100000 (reserved) -[ 0.000000] Xen: 0000000000100000 - 0000000008100000 (usable) -[ 0.000000] Xen: 0000000008100000 - 0000000020800000 (unusable) +[ 0.000000] Xen: 0000000000100000 - 0000000020800000 (usable) ... [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] DMI not present or invalid. [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) [ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable) -[ 0.000000] last_pfn = 0x8100 max_arch_pfn = 0x1000000 +[ 0.000000] last_pfn = 0x20800 max_arch_pfn = 0x1000000 [ 0.000000] initial memory mapped : 0 - 027ff000 [ 0.000000] Base memory trampoline at [c009f000] 9f000 size 4096 -[ 0.000000] init_memory_mapping: 0000000000000000-0000000008100000 -[ 0.000000] 0000000000 - 0008100000 page 4k -[ 0.000000] kernel direct mapping tables up to 8100000 @ 27bb000-27ff000 +[ 0.000000] init_memory_mapping: 0000000000000000-0000000020800000 +[ 0.000000] 0000000000 - 0020800000 page 4k +[ 0.000000] kernel direct mapping tables up to 20800000 @ 26f8000-27ff000 [ 0.000000] xen: setting RW the range 27e8000 - 27ff000 [ 0.000000] 0MB HIGHMEM available. -[ 0.000000] 129MB LOWMEM available. -[ 0.000000] mapped low ram: 0 - 08100000 -[ 0.000000] low ram: 0 - 08100000 +[ 0.000000] 520MB LOWMEM available. +[ 0.000000] mapped low ram: 0 - 20800000 +[ 0.000000] low ram: 0 - 20800000 With this change "xl mem-set 512M" will successfully increase the guest RAM (by reducing the balloon). There is no change for dom0. Reported-and-Tested-by: George Shuklin Signed-off-by: Ian Campbell Cc: stable@kernel.org Reviewed-by: David Vrabel Signed-off-by: Konrad Rzeszutek Wilk --- arch/x86/xen/setup.c | 18 +++++++++++++++--- 1 file changed, 15 insertions(+), 3 deletions(-) (limited to 'arch') diff --git a/arch/x86/xen/setup.c b/arch/x86/xen/setup.c index 38d0af4fefec..a54ff1aab6eb 100644 --- a/arch/x86/xen/setup.c +++ b/arch/x86/xen/setup.c @@ -173,9 +173,21 @@ static unsigned long __init xen_get_max_pages(void) domid_t domid = DOMID_SELF; int ret; - ret = HYPERVISOR_memory_op(XENMEM_maximum_reservation, &domid); - if (ret > 0) - max_pages = ret; + /* + * For the initial domain we use the maximum reservation as + * the maximum page. + * + * For guest domains the current maximum reservation reflects + * the current maximum rather than the static maximum. In this + * case the e820 map provided to us will cover the static + * maximum region. + */ + if (xen_initial_domain()) { + ret = HYPERVISOR_memory_op(XENMEM_maximum_reservation, &domid); + if (ret > 0) + max_pages = ret; + } + return min(max_pages, MAX_DOMAIN_PAGES); } -- cgit v1.2.1 From ddf5a25c5fdd4cc276edf451871c38002eec0f95 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Uwe=20Kleine-K=C3=B6nig?= Date: Thu, 15 Dec 2011 21:47:56 +0100 Subject: ARM: unwinder: fix bisection to find origin in .idx section MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The bisection implemented in unwind_find_origin() stopped to early. If there is only a single entry left to check the original code just took the end point as origin which might be wrong. This was introduced in commit de66a979012d ("ARM: 7187/1: fix unwinding for XIP kernels"). Reported-and-tested-by: Nick Bowler Signed-off-by: Uwe Kleine-König Signed-off-by: Linus Torvalds --- arch/arm/kernel/unwind.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/arm/kernel/unwind.c b/arch/arm/kernel/unwind.c index 3f03fe0c3269..00df012c4678 100644 --- a/arch/arm/kernel/unwind.c +++ b/arch/arm/kernel/unwind.c @@ -160,12 +160,12 @@ static const struct unwind_idx *unwind_find_origin( const struct unwind_idx *start, const struct unwind_idx *stop) { pr_debug("%s(%p, %p)\n", __func__, start, stop); - while (start < stop - 1) { + while (start < stop) { const struct unwind_idx *mid = start + ((stop - start) >> 1); if (mid->addr_offset >= 0x40000000) /* negative offset */ - start = mid; + start = mid + 1; else /* positive offset */ stop = mid; -- cgit v1.2.1 From 913050b91eb94f194392dd797b1ff3779f606ac0 Mon Sep 17 00:00:00 2001 From: Robert Richter Date: Mon, 19 Dec 2011 16:38:30 +0100 Subject: oprofile: Fix uninitialized memory access when writing to writing to oprofilefs If oprofilefs_ulong_from_user() is called with count equals zero, *val remains unchanged. Depending on the implementation it might be uninitialized. Change oprofilefs_ulong_from_user()'s interface to return count on success. Thus, we are able to return early if count equals zero which avoids using *val uninitialized. Fixing all users of oprofilefs_ulong_ from_user(). This follows write syscall implementation when count is zero: "If count is zero ... [and if] no errors are detected, 0 will be returned without causing any other effect." (man 2 write) Reported-By: Mike Waychison Signed-off-by: Robert Richter Cc: Andrew Morton Cc: Cc: oprofile-list Link: http://lkml.kernel.org/r/20111219153830.GH16765@erda.amd.com Signed-off-by: Ingo Molnar --- arch/s390/oprofile/init.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/s390/oprofile/init.c b/arch/s390/oprofile/init.c index 6efc18b5e60a..bd58b72454cf 100644 --- a/arch/s390/oprofile/init.c +++ b/arch/s390/oprofile/init.c @@ -88,7 +88,7 @@ static ssize_t hwsampler_write(struct file *file, char const __user *buf, return -EINVAL; retval = oprofilefs_ulong_from_user(&val, buf, count); - if (retval) + if (retval <= 0) return retval; if (oprofile_started) -- cgit v1.2.1 From 13f541c10b30fc6529200d7f9a0073217709622f Mon Sep 17 00:00:00 2001 From: Clemens Ladisch Date: Mon, 19 Dec 2011 22:07:58 +0100 Subject: x86, dumpstack: Fix code bytes breakage due to missing KERN_CONT When printing the code bytes in show_registers(), the markers around the byte at the fault address could make the printk() format string look like a valid log level and facility code. This would prevent this byte from being printed and result in a spurious newline: [ 7555.765589] Code: 8b 32 e9 94 00 00 00 81 7d 00 ff 00 00 00 0f 87 96 00 00 00 48 8b 83 c0 00 00 00 44 89 e2 44 89 e6 48 89 df 48 8b 80 d8 02 00 00 [ 7555.765683] 8b 48 28 48 89 d0 81 e2 ff 0f 00 00 48 c1 e8 0c 48 c1 e0 04 Add KERN_CONT where needed, and elsewhere in show_registers() for consistency. Signed-off-by: Clemens Ladisch Link: http://lkml.kernel.org/r/4EEFA7AE.9020407@ladisch.de Signed-off-by: H. Peter Anvin --- arch/x86/kernel/dumpstack_32.c | 8 ++++---- arch/x86/kernel/dumpstack_64.c | 8 ++++---- 2 files changed, 8 insertions(+), 8 deletions(-) (limited to 'arch') diff --git a/arch/x86/kernel/dumpstack_32.c b/arch/x86/kernel/dumpstack_32.c index 3b97a80ce329..c99f9ed013d5 100644 --- a/arch/x86/kernel/dumpstack_32.c +++ b/arch/x86/kernel/dumpstack_32.c @@ -116,16 +116,16 @@ void show_registers(struct pt_regs *regs) for (i = 0; i < code_len; i++, ip++) { if (ip < (u8 *)PAGE_OFFSET || probe_kernel_address(ip, c)) { - printk(" Bad EIP value."); + printk(KERN_CONT " Bad EIP value."); break; } if (ip == (u8 *)regs->ip) - printk("<%02x> ", c); + printk(KERN_CONT "<%02x> ", c); else - printk("%02x ", c); + printk(KERN_CONT "%02x ", c); } } - printk("\n"); + printk(KERN_CONT "\n"); } int is_valid_bugaddr(unsigned long ip) diff --git a/arch/x86/kernel/dumpstack_64.c b/arch/x86/kernel/dumpstack_64.c index 19853ad8afc5..6d728d9284bd 100644 --- a/arch/x86/kernel/dumpstack_64.c +++ b/arch/x86/kernel/dumpstack_64.c @@ -284,16 +284,16 @@ void show_registers(struct pt_regs *regs) for (i = 0; i < code_len; i++, ip++) { if (ip < (u8 *)PAGE_OFFSET || probe_kernel_address(ip, c)) { - printk(" Bad RIP value."); + printk(KERN_CONT " Bad RIP value."); break; } if (ip == (u8 *)regs->ip) - printk("<%02x> ", c); + printk(KERN_CONT "<%02x> ", c); else - printk("%02x ", c); + printk(KERN_CONT "%02x ", c); } } - printk("\n"); + printk(KERN_CONT "\n"); } int is_valid_bugaddr(unsigned long ip) -- cgit v1.2.1