From 06b4f2a51c02ad6190b569b67ac493659d9df68c Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Fri, 19 Oct 2007 20:35:02 +0200 Subject: x86: move cpufreq Kconfigs to the same directory Move the 64bit Kconfig file to arch/x86/kernel/cpu/cpufreq, so we can unify them. Signed-off-by: Thomas Gleixner --- arch/i386/Kconfig | 2 +- arch/x86/kernel/cpu/cpufreq/Kconfig | 250 --------------------------------- arch/x86/kernel/cpu/cpufreq/Kconfig_32 | 250 +++++++++++++++++++++++++++++++++ arch/x86/kernel/cpu/cpufreq/Kconfig_64 | 108 ++++++++++++++ arch/x86/kernel/cpufreq/Kconfig | 108 -------------- arch/x86_64/Kconfig | 2 +- 6 files changed, 360 insertions(+), 360 deletions(-) delete mode 100644 arch/x86/kernel/cpu/cpufreq/Kconfig create mode 100644 arch/x86/kernel/cpu/cpufreq/Kconfig_32 create mode 100644 arch/x86/kernel/cpu/cpufreq/Kconfig_64 delete mode 100644 arch/x86/kernel/cpufreq/Kconfig (limited to 'arch') diff --git a/arch/i386/Kconfig b/arch/i386/Kconfig index b84d5050e92e..ffcbbba806e0 100644 --- a/arch/i386/Kconfig +++ b/arch/i386/Kconfig @@ -1080,7 +1080,7 @@ config APM_REAL_MODE_POWER_OFF endif # APM -source "arch/x86/kernel/cpu/cpufreq/Kconfig" +source "arch/x86/kernel/cpu/cpufreq/Kconfig_32" endmenu diff --git a/arch/x86/kernel/cpu/cpufreq/Kconfig b/arch/x86/kernel/cpu/cpufreq/Kconfig deleted file mode 100644 index d8c6f132dc7a..000000000000 --- a/arch/x86/kernel/cpu/cpufreq/Kconfig +++ /dev/null @@ -1,250 +0,0 @@ -# -# CPU Frequency scaling -# - -menu "CPU Frequency scaling" - -source "drivers/cpufreq/Kconfig" - -if CPU_FREQ - -comment "CPUFreq processor drivers" - -config X86_ACPI_CPUFREQ - tristate "ACPI Processor P-States driver" - select CPU_FREQ_TABLE - depends on ACPI_PROCESSOR - help - This driver adds a CPUFreq driver which utilizes the ACPI - Processor Performance States. - This driver also supports Intel Enhanced Speedstep. - - For details, take a look at . - - If in doubt, say N. - -config ELAN_CPUFREQ - tristate "AMD Elan SC400 and SC410" - select CPU_FREQ_TABLE - depends on X86_ELAN - ---help--- - This adds the CPUFreq driver for AMD Elan SC400 and SC410 - processors. - - You need to specify the processor maximum speed as boot - parameter: elanfreq=maxspeed (in kHz) or as module - parameter "max_freq". - - For details, take a look at . - - If in doubt, say N. - -config SC520_CPUFREQ - tristate "AMD Elan SC520" - select CPU_FREQ_TABLE - depends on X86_ELAN - ---help--- - This adds the CPUFreq driver for AMD Elan SC520 processor. - - For details, take a look at . - - If in doubt, say N. - - -config X86_POWERNOW_K6 - tristate "AMD Mobile K6-2/K6-3 PowerNow!" - select CPU_FREQ_TABLE - help - This adds the CPUFreq driver for mobile AMD K6-2+ and mobile - AMD K6-3+ processors. - - For details, take a look at . - - If in doubt, say N. - -config X86_POWERNOW_K7 - tristate "AMD Mobile Athlon/Duron PowerNow!" - select CPU_FREQ_TABLE - help - This adds the CPUFreq driver for mobile AMD K7 mobile processors. - - For details, take a look at . - - If in doubt, say N. - -config X86_POWERNOW_K7_ACPI - bool - depends on X86_POWERNOW_K7 && ACPI_PROCESSOR - depends on !(X86_POWERNOW_K7 = y && ACPI_PROCESSOR = m) - default y - -config X86_POWERNOW_K8 - tristate "AMD Opteron/Athlon64 PowerNow!" - select CPU_FREQ_TABLE - depends on EXPERIMENTAL - help - This adds the CPUFreq driver for mobile AMD Opteron/Athlon64 processors. - - For details, take a look at . - - If in doubt, say N. - -config X86_POWERNOW_K8_ACPI - bool "ACPI Support" - select ACPI_PROCESSOR - depends on ACPI && X86_POWERNOW_K8 - default y - help - This provides access to the K8s Processor Performance States via ACPI. - This driver is probably required for CPUFreq to work with multi-socket and - SMP systems. It is not required on at least some single-socket yet - multi-core systems, even if SMP is enabled. - - It is safe to say Y here. - -config X86_GX_SUSPMOD - tristate "Cyrix MediaGX/NatSemi Geode Suspend Modulation" - depends on PCI - help - This add the CPUFreq driver for NatSemi Geode processors which - support suspend modulation. - - For details, take a look at . - - If in doubt, say N. - -config X86_SPEEDSTEP_CENTRINO - tristate "Intel Enhanced SpeedStep" - select CPU_FREQ_TABLE - select X86_SPEEDSTEP_CENTRINO_TABLE - help - This adds the CPUFreq driver for Enhanced SpeedStep enabled - mobile CPUs. This means Intel Pentium M (Centrino) CPUs. However, - you also need to say Y to "Use ACPI tables to decode..." below - [which might imply enabling ACPI] if you want to use this driver - on non-Banias CPUs. - - For details, take a look at . - - If in doubt, say N. - -config X86_SPEEDSTEP_CENTRINO_TABLE - bool "Built-in tables for Banias CPUs" - depends on X86_SPEEDSTEP_CENTRINO - default y - help - Use built-in tables for Banias CPUs if ACPI encoding - is not available. - - If in doubt, say N. - -config X86_SPEEDSTEP_ICH - tristate "Intel Speedstep on ICH-M chipsets (ioport interface)" - select CPU_FREQ_TABLE - help - This adds the CPUFreq driver for certain mobile Intel Pentium III - (Coppermine), all mobile Intel Pentium III-M (Tualatin) and all - mobile Intel Pentium 4 P4-M on systems which have an Intel ICH2, - ICH3 or ICH4 southbridge. - - For details, take a look at . - - If in doubt, say N. - -config X86_SPEEDSTEP_SMI - tristate "Intel SpeedStep on 440BX/ZX/MX chipsets (SMI interface)" - select CPU_FREQ_TABLE - depends on EXPERIMENTAL - help - This adds the CPUFreq driver for certain mobile Intel Pentium III - (Coppermine), all mobile Intel Pentium III-M (Tualatin) - on systems which have an Intel 440BX/ZX/MX southbridge. - - For details, take a look at . - - If in doubt, say N. - -config X86_P4_CLOCKMOD - tristate "Intel Pentium 4 clock modulation" - select CPU_FREQ_TABLE - help - This adds the CPUFreq driver for Intel Pentium 4 / XEON - processors. - - For details, take a look at . - - If in doubt, say N. - -config X86_CPUFREQ_NFORCE2 - tristate "nVidia nForce2 FSB changing" - depends on EXPERIMENTAL - help - This adds the CPUFreq driver for FSB changing on nVidia nForce2 - platforms. - - For details, take a look at . - - If in doubt, say N. - -config X86_LONGRUN - tristate "Transmeta LongRun" - help - This adds the CPUFreq driver for Transmeta Crusoe and Efficeon processors - which support LongRun. - - For details, take a look at . - - If in doubt, say N. - -config X86_LONGHAUL - tristate "VIA Cyrix III Longhaul" - select CPU_FREQ_TABLE - depends on ACPI_PROCESSOR - help - This adds the CPUFreq driver for VIA Samuel/CyrixIII, - VIA Cyrix Samuel/C3, VIA Cyrix Ezra and VIA Cyrix Ezra-T - processors. - - For details, take a look at . - - If in doubt, say N. - -config X86_E_POWERSAVER - tristate "VIA C7 Enhanced PowerSaver (EXPERIMENTAL)" - select CPU_FREQ_TABLE - depends on EXPERIMENTAL - help - This adds the CPUFreq driver for VIA C7 processors. - - If in doubt, say N. - -comment "shared options" - -config X86_ACPI_CPUFREQ_PROC_INTF - bool "/proc/acpi/processor/../performance interface (deprecated)" - depends on PROC_FS - depends on X86_ACPI_CPUFREQ || X86_POWERNOW_K7_ACPI || X86_POWERNOW_K8_ACPI - help - This enables the deprecated /proc/acpi/processor/../performance - interface. While it is helpful for debugging, the generic, - cross-architecture cpufreq interfaces should be used. - - If in doubt, say N. - -config X86_SPEEDSTEP_LIB - tristate - default X86_SPEEDSTEP_ICH || X86_SPEEDSTEP_SMI || X86_P4_CLOCKMOD - -config X86_SPEEDSTEP_RELAXED_CAP_CHECK - bool "Relaxed speedstep capability checks" - depends on (X86_SPEEDSTEP_SMI || X86_SPEEDSTEP_ICH) - help - Don't perform all checks for a speedstep capable system which would - normally be done. Some ancient or strange systems, though speedstep - capable, don't always indicate that they are speedstep capable. This - option lets the probing code bypass some of those checks if the - parameter "relaxed_check=1" is passed to the module. - -endif # CPU_FREQ - -endmenu diff --git a/arch/x86/kernel/cpu/cpufreq/Kconfig_32 b/arch/x86/kernel/cpu/cpufreq/Kconfig_32 new file mode 100644 index 000000000000..d8c6f132dc7a --- /dev/null +++ b/arch/x86/kernel/cpu/cpufreq/Kconfig_32 @@ -0,0 +1,250 @@ +# +# CPU Frequency scaling +# + +menu "CPU Frequency scaling" + +source "drivers/cpufreq/Kconfig" + +if CPU_FREQ + +comment "CPUFreq processor drivers" + +config X86_ACPI_CPUFREQ + tristate "ACPI Processor P-States driver" + select CPU_FREQ_TABLE + depends on ACPI_PROCESSOR + help + This driver adds a CPUFreq driver which utilizes the ACPI + Processor Performance States. + This driver also supports Intel Enhanced Speedstep. + + For details, take a look at . + + If in doubt, say N. + +config ELAN_CPUFREQ + tristate "AMD Elan SC400 and SC410" + select CPU_FREQ_TABLE + depends on X86_ELAN + ---help--- + This adds the CPUFreq driver for AMD Elan SC400 and SC410 + processors. + + You need to specify the processor maximum speed as boot + parameter: elanfreq=maxspeed (in kHz) or as module + parameter "max_freq". + + For details, take a look at . + + If in doubt, say N. + +config SC520_CPUFREQ + tristate "AMD Elan SC520" + select CPU_FREQ_TABLE + depends on X86_ELAN + ---help--- + This adds the CPUFreq driver for AMD Elan SC520 processor. + + For details, take a look at . + + If in doubt, say N. + + +config X86_POWERNOW_K6 + tristate "AMD Mobile K6-2/K6-3 PowerNow!" + select CPU_FREQ_TABLE + help + This adds the CPUFreq driver for mobile AMD K6-2+ and mobile + AMD K6-3+ processors. + + For details, take a look at . + + If in doubt, say N. + +config X86_POWERNOW_K7 + tristate "AMD Mobile Athlon/Duron PowerNow!" + select CPU_FREQ_TABLE + help + This adds the CPUFreq driver for mobile AMD K7 mobile processors. + + For details, take a look at . + + If in doubt, say N. + +config X86_POWERNOW_K7_ACPI + bool + depends on X86_POWERNOW_K7 && ACPI_PROCESSOR + depends on !(X86_POWERNOW_K7 = y && ACPI_PROCESSOR = m) + default y + +config X86_POWERNOW_K8 + tristate "AMD Opteron/Athlon64 PowerNow!" + select CPU_FREQ_TABLE + depends on EXPERIMENTAL + help + This adds the CPUFreq driver for mobile AMD Opteron/Athlon64 processors. + + For details, take a look at . + + If in doubt, say N. + +config X86_POWERNOW_K8_ACPI + bool "ACPI Support" + select ACPI_PROCESSOR + depends on ACPI && X86_POWERNOW_K8 + default y + help + This provides access to the K8s Processor Performance States via ACPI. + This driver is probably required for CPUFreq to work with multi-socket and + SMP systems. It is not required on at least some single-socket yet + multi-core systems, even if SMP is enabled. + + It is safe to say Y here. + +config X86_GX_SUSPMOD + tristate "Cyrix MediaGX/NatSemi Geode Suspend Modulation" + depends on PCI + help + This add the CPUFreq driver for NatSemi Geode processors which + support suspend modulation. + + For details, take a look at . + + If in doubt, say N. + +config X86_SPEEDSTEP_CENTRINO + tristate "Intel Enhanced SpeedStep" + select CPU_FREQ_TABLE + select X86_SPEEDSTEP_CENTRINO_TABLE + help + This adds the CPUFreq driver for Enhanced SpeedStep enabled + mobile CPUs. This means Intel Pentium M (Centrino) CPUs. However, + you also need to say Y to "Use ACPI tables to decode..." below + [which might imply enabling ACPI] if you want to use this driver + on non-Banias CPUs. + + For details, take a look at . + + If in doubt, say N. + +config X86_SPEEDSTEP_CENTRINO_TABLE + bool "Built-in tables for Banias CPUs" + depends on X86_SPEEDSTEP_CENTRINO + default y + help + Use built-in tables for Banias CPUs if ACPI encoding + is not available. + + If in doubt, say N. + +config X86_SPEEDSTEP_ICH + tristate "Intel Speedstep on ICH-M chipsets (ioport interface)" + select CPU_FREQ_TABLE + help + This adds the CPUFreq driver for certain mobile Intel Pentium III + (Coppermine), all mobile Intel Pentium III-M (Tualatin) and all + mobile Intel Pentium 4 P4-M on systems which have an Intel ICH2, + ICH3 or ICH4 southbridge. + + For details, take a look at . + + If in doubt, say N. + +config X86_SPEEDSTEP_SMI + tristate "Intel SpeedStep on 440BX/ZX/MX chipsets (SMI interface)" + select CPU_FREQ_TABLE + depends on EXPERIMENTAL + help + This adds the CPUFreq driver for certain mobile Intel Pentium III + (Coppermine), all mobile Intel Pentium III-M (Tualatin) + on systems which have an Intel 440BX/ZX/MX southbridge. + + For details, take a look at . + + If in doubt, say N. + +config X86_P4_CLOCKMOD + tristate "Intel Pentium 4 clock modulation" + select CPU_FREQ_TABLE + help + This adds the CPUFreq driver for Intel Pentium 4 / XEON + processors. + + For details, take a look at . + + If in doubt, say N. + +config X86_CPUFREQ_NFORCE2 + tristate "nVidia nForce2 FSB changing" + depends on EXPERIMENTAL + help + This adds the CPUFreq driver for FSB changing on nVidia nForce2 + platforms. + + For details, take a look at . + + If in doubt, say N. + +config X86_LONGRUN + tristate "Transmeta LongRun" + help + This adds the CPUFreq driver for Transmeta Crusoe and Efficeon processors + which support LongRun. + + For details, take a look at . + + If in doubt, say N. + +config X86_LONGHAUL + tristate "VIA Cyrix III Longhaul" + select CPU_FREQ_TABLE + depends on ACPI_PROCESSOR + help + This adds the CPUFreq driver for VIA Samuel/CyrixIII, + VIA Cyrix Samuel/C3, VIA Cyrix Ezra and VIA Cyrix Ezra-T + processors. + + For details, take a look at . + + If in doubt, say N. + +config X86_E_POWERSAVER + tristate "VIA C7 Enhanced PowerSaver (EXPERIMENTAL)" + select CPU_FREQ_TABLE + depends on EXPERIMENTAL + help + This adds the CPUFreq driver for VIA C7 processors. + + If in doubt, say N. + +comment "shared options" + +config X86_ACPI_CPUFREQ_PROC_INTF + bool "/proc/acpi/processor/../performance interface (deprecated)" + depends on PROC_FS + depends on X86_ACPI_CPUFREQ || X86_POWERNOW_K7_ACPI || X86_POWERNOW_K8_ACPI + help + This enables the deprecated /proc/acpi/processor/../performance + interface. While it is helpful for debugging, the generic, + cross-architecture cpufreq interfaces should be used. + + If in doubt, say N. + +config X86_SPEEDSTEP_LIB + tristate + default X86_SPEEDSTEP_ICH || X86_SPEEDSTEP_SMI || X86_P4_CLOCKMOD + +config X86_SPEEDSTEP_RELAXED_CAP_CHECK + bool "Relaxed speedstep capability checks" + depends on (X86_SPEEDSTEP_SMI || X86_SPEEDSTEP_ICH) + help + Don't perform all checks for a speedstep capable system which would + normally be done. Some ancient or strange systems, though speedstep + capable, don't always indicate that they are speedstep capable. This + option lets the probing code bypass some of those checks if the + parameter "relaxed_check=1" is passed to the module. + +endif # CPU_FREQ + +endmenu diff --git a/arch/x86/kernel/cpu/cpufreq/Kconfig_64 b/arch/x86/kernel/cpu/cpufreq/Kconfig_64 new file mode 100644 index 000000000000..9c9699fdcf52 --- /dev/null +++ b/arch/x86/kernel/cpu/cpufreq/Kconfig_64 @@ -0,0 +1,108 @@ +# +# CPU Frequency scaling +# + +menu "CPU Frequency scaling" + +source "drivers/cpufreq/Kconfig" + +if CPU_FREQ + +comment "CPUFreq processor drivers" + +config X86_POWERNOW_K8 + tristate "AMD Opteron/Athlon64 PowerNow!" + select CPU_FREQ_TABLE + help + This adds the CPUFreq driver for mobile AMD Opteron/Athlon64 processors. + + To compile this driver as a module, choose M here: the + module will be called powernow-k8. + + For details, take a look at . + + If in doubt, say N. + +config X86_POWERNOW_K8_ACPI + bool + depends on X86_POWERNOW_K8 && ACPI_PROCESSOR + depends on !(X86_POWERNOW_K8 = y && ACPI_PROCESSOR = m) + default y + +config X86_SPEEDSTEP_CENTRINO + tristate "Intel Enhanced SpeedStep (deprecated)" + select CPU_FREQ_TABLE + depends on ACPI_PROCESSOR + help + This is deprecated and this functionality is now merged into + acpi_cpufreq (X86_ACPI_CPUFREQ). Use that driver instead of + speedstep_centrino. + This adds the CPUFreq driver for Enhanced SpeedStep enabled + mobile CPUs. This means Intel Pentium M (Centrino) CPUs + or 64bit enabled Intel Xeons. + + To compile this driver as a module, choose M here: the + module will be called speedstep-centrino. + + For details, take a look at . + + If in doubt, say N. + +config X86_ACPI_CPUFREQ + tristate "ACPI Processor P-States driver" + select CPU_FREQ_TABLE + depends on ACPI_PROCESSOR + help + This driver adds a CPUFreq driver which utilizes the ACPI + Processor Performance States. + This driver also supports Intel Enhanced Speedstep. + + To compile this driver as a module, choose M here: the + module will be called acpi-cpufreq. + + For details, take a look at . + + If in doubt, say N. + +comment "shared options" + +config X86_ACPI_CPUFREQ_PROC_INTF + bool "/proc/acpi/processor/../performance interface (deprecated)" + depends on PROC_FS + depends on X86_ACPI_CPUFREQ || X86_POWERNOW_K8_ACPI + help + This enables the deprecated /proc/acpi/processor/../performance + interface. While it is helpful for debugging, the generic, + cross-architecture cpufreq interfaces should be used. + + If in doubt, say N. + +config X86_P4_CLOCKMOD + tristate "Intel Pentium 4 clock modulation" + depends on EMBEDDED + select CPU_FREQ_TABLE + help + This adds the clock modulation driver for Intel Pentium 4 / XEON + processors. When enabled it will lower CPU temperature by skipping + clocks. + + This driver should be only used in exceptional + circumstances when very low power is needed because it causes severe + slowdowns and noticeable latencies. Normally Speedstep should be used + instead. + + To compile this driver as a module, choose M here: the + module will be called p4-clockmod. + + For details, take a look at . + + Unless you are absolutely sure say N. + + +config X86_SPEEDSTEP_LIB + tristate + default X86_P4_CLOCKMOD + +endif + +endmenu diff --git a/arch/x86/kernel/cpufreq/Kconfig b/arch/x86/kernel/cpufreq/Kconfig deleted file mode 100644 index a3fd51926cbd..000000000000 --- a/arch/x86/kernel/cpufreq/Kconfig +++ /dev/null @@ -1,108 +0,0 @@ -# -# CPU Frequency scaling -# - -menu "CPU Frequency scaling" - -source "drivers/cpufreq/Kconfig" - -if CPU_FREQ - -comment "CPUFreq processor drivers" - -config X86_POWERNOW_K8 - tristate "AMD Opteron/Athlon64 PowerNow!" - select CPU_FREQ_TABLE - help - This adds the CPUFreq driver for mobile AMD Opteron/Athlon64 processors. - - To compile this driver as a module, choose M here: the - module will be called powernow-k8. - - For details, take a look at . - - If in doubt, say N. - -config X86_POWERNOW_K8_ACPI - bool - depends on X86_POWERNOW_K8 && ACPI_PROCESSOR - depends on !(X86_POWERNOW_K8 = y && ACPI_PROCESSOR = m) - default y - -config X86_SPEEDSTEP_CENTRINO - tristate "Intel Enhanced SpeedStep (deprecated)" - select CPU_FREQ_TABLE - depends on ACPI_PROCESSOR - help - This is deprecated and this functionality is now merged into - acpi_cpufreq (X86_ACPI_CPUFREQ). Use that driver instead of - speedstep_centrino. - This adds the CPUFreq driver for Enhanced SpeedStep enabled - mobile CPUs. This means Intel Pentium M (Centrino) CPUs - or 64bit enabled Intel Xeons. - - To compile this driver as a module, choose M here: the - module will be called speedstep-centrino. - - For details, take a look at . - - If in doubt, say N. - -config X86_ACPI_CPUFREQ - tristate "ACPI Processor P-States driver" - select CPU_FREQ_TABLE - depends on ACPI_PROCESSOR - help - This driver adds a CPUFreq driver which utilizes the ACPI - Processor Performance States. - This driver also supports Intel Enhanced Speedstep. - - To compile this driver as a module, choose M here: the - module will be called acpi-cpufreq. - - For details, take a look at . - - If in doubt, say N. - -comment "shared options" - -config X86_ACPI_CPUFREQ_PROC_INTF - bool "/proc/acpi/processor/../performance interface (deprecated)" - depends on PROC_FS - depends on X86_ACPI_CPUFREQ || X86_POWERNOW_K8_ACPI - help - This enables the deprecated /proc/acpi/processor/../performance - interface. While it is helpful for debugging, the generic, - cross-architecture cpufreq interfaces should be used. - - If in doubt, say N. - -config X86_P4_CLOCKMOD - tristate "Intel Pentium 4 clock modulation" - depends on EMBEDDED - select CPU_FREQ_TABLE - help - This adds the clock modulation driver for Intel Pentium 4 / XEON - processors. When enabled it will lower CPU temperature by skipping - clocks. - - This driver should be only used in exceptional - circumstances when very low power is needed because it causes severe - slowdowns and noticeable latencies. Normally Speedstep should be used - instead. - - To compile this driver as a module, choose M here: the - module will be called p4-clockmod. - - For details, take a look at . - - Unless you are absolutely sure say N. - - -config X86_SPEEDSTEP_LIB - tristate - default X86_P4_CLOCKMOD - -endif - -endmenu diff --git a/arch/x86_64/Kconfig b/arch/x86_64/Kconfig index 78cb68f2ebbd..712ebd9c5d6a 100644 --- a/arch/x86_64/Kconfig +++ b/arch/x86_64/Kconfig @@ -723,7 +723,7 @@ config ARCH_HIBERNATION_HEADER source "drivers/acpi/Kconfig" -source "arch/x86/kernel/cpufreq/Kconfig" +source "arch/x86/kernel/cpu/cpufreq/Kconfig_64" endmenu -- cgit v1.2.1