From 867e359b97c970a60626d5d76bbe2a8fadbf38fb Mon Sep 17 00:00:00 2001 From: Chris Metcalf Date: Fri, 28 May 2010 23:09:12 -0400 Subject: arch/tile: core support for Tilera 32-bit chips. This change is the core kernel support for TILEPro and TILE64 chips. No driver support (except the console driver) is included yet. This includes the relevant Linux headers in asm/; the low-level low-level "Tile architecture" headers in arch/, which are shared with the hypervisor, etc., and are build-system agnostic; and the relevant hypervisor headers in hv/. Signed-off-by: Chris Metcalf Acked-by: Arnd Bergmann Acked-by: FUJITA Tomonori Reviewed-by: Paul Mundt --- arch/tile/kernel/time.c | 220 ++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 220 insertions(+) create mode 100644 arch/tile/kernel/time.c (limited to 'arch/tile/kernel/time.c') diff --git a/arch/tile/kernel/time.c b/arch/tile/kernel/time.c new file mode 100644 index 000000000000..47500a324e32 --- /dev/null +++ b/arch/tile/kernel/time.c @@ -0,0 +1,220 @@ +/* + * Copyright 2010 Tilera Corporation. All Rights Reserved. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation, version 2. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or + * NON INFRINGEMENT. See the GNU General Public License for + * more details. + * + * Support the cycle counter clocksource and tile timer clock event device. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + + +/* + * Define the cycle counter clock source. + */ + +/* How many cycles per second we are running at. */ +static cycles_t cycles_per_sec __write_once; + +/* + * We set up shift and multiply values with a minsec of five seconds, + * since our timer counter counts down 31 bits at a frequency of + * no less than 500 MHz. See @minsec for clocks_calc_mult_shift(). + * We could use a different value for the 64-bit free-running + * cycle counter, but we use the same one for consistency, and since + * we will be reasonably precise with this value anyway. + */ +#define TILE_MINSEC 5 + +cycles_t get_clock_rate() +{ + return cycles_per_sec; +} + +#if CHIP_HAS_SPLIT_CYCLE() +cycles_t get_cycles() +{ + unsigned int high = __insn_mfspr(SPR_CYCLE_HIGH); + unsigned int low = __insn_mfspr(SPR_CYCLE_LOW); + unsigned int high2 = __insn_mfspr(SPR_CYCLE_HIGH); + + while (unlikely(high != high2)) { + low = __insn_mfspr(SPR_CYCLE_LOW); + high = high2; + high2 = __insn_mfspr(SPR_CYCLE_HIGH); + } + + return (((cycles_t)high) << 32) | low; +} +#endif + +cycles_t clocksource_get_cycles(struct clocksource *cs) +{ + return get_cycles(); +} + +static struct clocksource cycle_counter_cs = { + .name = "cycle counter", + .rating = 300, + .read = clocksource_get_cycles, + .mask = CLOCKSOURCE_MASK(64), + .flags = CLOCK_SOURCE_IS_CONTINUOUS, +}; + +/* + * Called very early from setup_arch() to set cycles_per_sec. + * We initialize it early so we can use it to set up loops_per_jiffy. + */ +void __init setup_clock(void) +{ + cycles_per_sec = hv_sysconf(HV_SYSCONF_CPU_SPEED); + clocksource_calc_mult_shift(&cycle_counter_cs, cycles_per_sec, + TILE_MINSEC); +} + +void __init calibrate_delay(void) +{ + loops_per_jiffy = get_clock_rate() / HZ; + pr_info("Clock rate yields %lu.%02lu BogoMIPS (lpj=%lu)\n", + loops_per_jiffy/(500000/HZ), + (loops_per_jiffy/(5000/HZ)) % 100, loops_per_jiffy); +} + +/* Called fairly late in init/main.c, but before we go smp. */ +void __init time_init(void) +{ + /* Initialize and register the clock source. */ + clocksource_register(&cycle_counter_cs); + + /* Start up the tile-timer interrupt source on the boot cpu. */ + setup_tile_timer(); +} + + +/* + * Define the tile timer clock event device. The timer is driven by + * the TILE_TIMER_CONTROL register, which consists of a 31-bit down + * counter, plus bit 31, which signifies that the counter has wrapped + * from zero to (2**31) - 1. The INT_TILE_TIMER interrupt will be + * raised as long as bit 31 is set. + */ + +#define MAX_TICK 0x7fffffff /* we have 31 bits of countdown timer */ + +static int tile_timer_set_next_event(unsigned long ticks, + struct clock_event_device *evt) +{ + BUG_ON(ticks > MAX_TICK); + __insn_mtspr(SPR_TILE_TIMER_CONTROL, ticks); + raw_local_irq_unmask_now(INT_TILE_TIMER); + return 0; +} + +/* + * Whenever anyone tries to change modes, we just mask interrupts + * and wait for the next event to get set. + */ +static void tile_timer_set_mode(enum clock_event_mode mode, + struct clock_event_device *evt) +{ + raw_local_irq_mask_now(INT_TILE_TIMER); +} + +/* + * Set min_delta_ns to 1 microsecond, since it takes about + * that long to fire the interrupt. + */ +static DEFINE_PER_CPU(struct clock_event_device, tile_timer) = { + .name = "tile timer", + .features = CLOCK_EVT_FEAT_ONESHOT, + .min_delta_ns = 1000, + .rating = 100, + .irq = -1, + .set_next_event = tile_timer_set_next_event, + .set_mode = tile_timer_set_mode, +}; + +void __cpuinit setup_tile_timer(void) +{ + struct clock_event_device *evt = &__get_cpu_var(tile_timer); + + /* Fill in fields that are speed-specific. */ + clockevents_calc_mult_shift(evt, cycles_per_sec, TILE_MINSEC); + evt->max_delta_ns = clockevent_delta2ns(MAX_TICK, evt); + + /* Mark as being for this cpu only. */ + evt->cpumask = cpumask_of(smp_processor_id()); + + /* Start out with timer not firing. */ + raw_local_irq_mask_now(INT_TILE_TIMER); + + /* Register tile timer. */ + clockevents_register_device(evt); +} + +/* Called from the interrupt vector. */ +void do_timer_interrupt(struct pt_regs *regs, int fault_num) +{ + struct pt_regs *old_regs = set_irq_regs(regs); + struct clock_event_device *evt = &__get_cpu_var(tile_timer); + + /* + * Mask the timer interrupt here, since we are a oneshot timer + * and there are now by definition no events pending. + */ + raw_local_irq_mask(INT_TILE_TIMER); + + /* Track time spent here in an interrupt context */ + irq_enter(); + + /* Track interrupt count. */ + __get_cpu_var(irq_stat).irq_timer_count++; + + /* Call the generic timer handler */ + evt->event_handler(evt); + + /* + * Track time spent against the current process again and + * process any softirqs if they are waiting. + */ + irq_exit(); + + set_irq_regs(old_regs); +} + +/* + * Scheduler clock - returns current time in nanosec units. + * Note that with LOCKDEP, this is called during lockdep_init(), and + * we will claim that sched_clock() is zero for a little while, until + * we run setup_clock(), above. + */ +unsigned long long sched_clock(void) +{ + return clocksource_cyc2ns(get_cycles(), + cycle_counter_cs.mult, + cycle_counter_cs.shift); +} + +int setup_profiling_timer(unsigned int multiplier) +{ + return -EINVAL; +} -- cgit v1.2.1