From 923c53caea446d246949c94703be83e68f251af7 Mon Sep 17 00:00:00 2001 From: Paul Mackerras Date: Wed, 29 Jun 2011 00:20:24 +0000 Subject: powerpc: Set up LPCR for running guest partitions In hypervisor mode, the LPCR controls several aspects of guest partitions, including virtual partition memory mode, and also controls whether the hypervisor decrementer interrupts are enabled. This sets up LPCR at boot time so that guest partitions will use a virtual real memory area (VRMA) composed of 16MB large pages, and hypervisor decrementer interrupts are disabled. Signed-off-by: Paul Mackerras Signed-off-by: Alexander Graf --- arch/powerpc/kernel/cpu_setup_power7.S | 18 +++++++++++------- 1 file changed, 11 insertions(+), 7 deletions(-) (limited to 'arch/powerpc/kernel/cpu_setup_power7.S') diff --git a/arch/powerpc/kernel/cpu_setup_power7.S b/arch/powerpc/kernel/cpu_setup_power7.S index 4f9a93fcfe07..2ef6749688e9 100644 --- a/arch/powerpc/kernel/cpu_setup_power7.S +++ b/arch/powerpc/kernel/cpu_setup_power7.S @@ -61,19 +61,23 @@ __init_LPCR: * LPES = 0b01 (HSRR0/1 used for 0x500) * PECE = 0b111 * DPFD = 4 + * HDICE = 0 + * VC = 0b100 (VPM0=1, VPM1=0, ISL=0) + * VRMASD = 0b10000 (L=1, LP=00) * * Other bits untouched for now */ mfspr r3,SPRN_LPCR - ori r3,r3,(LPCR_LPES0|LPCR_LPES1) - xori r3,r3, LPCR_LPES0 + li r5,1 + rldimi r3,r5, LPCR_LPES_SH, 64-LPCR_LPES_SH-2 ori r3,r3,(LPCR_PECE0|LPCR_PECE1|LPCR_PECE2) - li r5,7 - sldi r5,r5,LPCR_DPFD_SH - andc r3,r3,r5 li r5,4 - sldi r5,r5,LPCR_DPFD_SH - or r3,r3,r5 + rldimi r3,r5, LPCR_DPFD_SH, 64-LPCR_DPFD_SH-3 + clrrdi r3,r3,1 /* clear HDICE */ + li r5,4 + rldimi r3,r5, LPCR_VC_SH, 0 + li r5,0x10 + rldimi r3,r5, LPCR_VRMASD_SH, 64-LPCR_VRMASD_SH-5 mtspr SPRN_LPCR,r3 isync blr -- cgit v1.2.1 From 969391c58a4efb8411d6881179945f425ad9cbb5 Mon Sep 17 00:00:00 2001 From: Paul Mackerras Date: Wed, 29 Jun 2011 00:26:11 +0000 Subject: powerpc, KVM: Split HVMODE_206 cpu feature bit into separate HV and architecture bits This replaces the single CPU_FTR_HVMODE_206 bit with two bits, one to indicate that we have a usable hypervisor mode, and another to indicate that the processor conforms to PowerISA version 2.06. We also add another bit to indicate that the processor conforms to ISA version 2.01 and set that for PPC970 and derivatives. Some PPC970 chips (specifically those in Apple machines) have a hypervisor mode in that MSR[HV] is always 1, but the hypervisor mode is not useful in the sense that there is no way to run any code in supervisor mode (HV=0 PR=0). On these processors, the LPES0 and LPES1 bits in HID4 are always 0, and we use that as a way of detecting that hypervisor mode is not useful. Where we have a feature section in assembly code around code that only applies on POWER7 in hypervisor mode, we use a construct like END_FTR_SECTION_IFSET(CPU_FTR_HVMODE | CPU_FTR_ARCH_206) The definition of END_FTR_SECTION_IFSET is such that the code will be enabled (not overwritten with nops) only if all bits in the provided mask are set. Note that the CPU feature check in __tlbie() only needs to check the ARCH_206 bit, not the HVMODE bit, because __tlbie() can only get called if we are running bare-metal, i.e. in hypervisor mode. Signed-off-by: Paul Mackerras Signed-off-by: Alexander Graf --- arch/powerpc/kernel/cpu_setup_power7.S | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'arch/powerpc/kernel/cpu_setup_power7.S') diff --git a/arch/powerpc/kernel/cpu_setup_power7.S b/arch/powerpc/kernel/cpu_setup_power7.S index 2ef6749688e9..76797c5105d6 100644 --- a/arch/powerpc/kernel/cpu_setup_power7.S +++ b/arch/powerpc/kernel/cpu_setup_power7.S @@ -45,12 +45,12 @@ _GLOBAL(__restore_cpu_power7) blr __init_hvmode_206: - /* Disable CPU_FTR_HVMODE_206 and exit if MSR:HV is not set */ + /* Disable CPU_FTR_HVMODE and exit if MSR:HV is not set */ mfmsr r3 rldicl. r0,r3,4,63 bnelr ld r5,CPU_SPEC_FEATURES(r4) - LOAD_REG_IMMEDIATE(r6,CPU_FTR_HVMODE_206) + LOAD_REG_IMMEDIATE(r6,CPU_FTR_HVMODE) xor r5,r5,r6 std r5,CPU_SPEC_FEATURES(r4) blr -- cgit v1.2.1