From 0ca71737fee65521ede964afbd2d5484976ed0ed Mon Sep 17 00:00:00 2001 From: Shane McDonald Date: Sun, 12 Jul 2009 10:42:06 -0600 Subject: MIPS: Simplify and correct interrupt handling for MSP4200 The current interrupt handling code for the MSP4200 always masks an interrupt before acknowledging it. This is not required, as that will be handled by the level interrupt handler. This change simplifies the MSP4200 code to remove the masking in the ack routine, and makes sure that the minimum required operation is performed for masking and acking, rather than always both masking and acking the interrupt. Signed-off-by: Shane McDonald Signed-off-by: Ralf Baechle --- arch/mips/pmc-sierra/msp71xx/msp_irq_slp.c | 10 +--------- 1 file changed, 1 insertion(+), 9 deletions(-) (limited to 'arch/mips/pmc-sierra/msp71xx/msp_irq_slp.c') diff --git a/arch/mips/pmc-sierra/msp71xx/msp_irq_slp.c b/arch/mips/pmc-sierra/msp71xx/msp_irq_slp.c index 66f6f8505e7c..61f390232346 100644 --- a/arch/mips/pmc-sierra/msp71xx/msp_irq_slp.c +++ b/arch/mips/pmc-sierra/msp71xx/msp_irq_slp.c @@ -45,13 +45,6 @@ static inline void mask_msp_slp_irq(unsigned int irq) */ static inline void ack_msp_slp_irq(unsigned int irq) { - mask_msp_slp_irq(irq); - - /* - * only really necessary for 18, 16-14 and sometimes 3:0 (since - * these can be edge sensitive) but it doesn't hurt for the others. - */ - /* check for PER interrupt range */ if (irq < MSP_PER_INTBASE) *SLP_INT_STS_REG = (1 << (irq - MSP_SLP_INTBASE)); @@ -62,8 +55,7 @@ static inline void ack_msp_slp_irq(unsigned int irq) static struct irq_chip msp_slp_irq_controller = { .name = "MSP_SLP", .ack = ack_msp_slp_irq, - .mask = ack_msp_slp_irq, - .mask_ack = ack_msp_slp_irq, + .mask = mask_msp_slp_irq, .unmask = unmask_msp_slp_irq, }; -- cgit v1.2.1