From 070276d5d049f385763dee19112bea08f56c9a0d Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Sun, 17 May 2009 22:32:23 +0100 Subject: [ARM] S3C24XX: GPIO: Change to macros for GPIO numbering Prepare to remove the large number of S3C2410_GPxn defines by moving to S3C2410_GPx(n) in arch/arm. The following perl was used to change the files: perl -pi~ -e 's/S3C2410_GP([A-Z])([0-9]+)([^_^0-9])/S3C2410_GP\1\(\2\)\3/g' Signed-off-by: Ben Dooks --- arch/arm/mach-s3c2412/mach-jive.c | 42 +++++++++++++++++------------------ arch/arm/mach-s3c2412/mach-smdk2413.c | 8 +++---- 2 files changed, 25 insertions(+), 25 deletions(-) (limited to 'arch/arm/mach-s3c2412') diff --git a/arch/arm/mach-s3c2412/mach-jive.c b/arch/arm/mach-s3c2412/mach-jive.c index 56d12b56c9d9..8df506eac903 100644 --- a/arch/arm/mach-s3c2412/mach-jive.c +++ b/arch/arm/mach-s3c2412/mach-jive.c @@ -357,8 +357,8 @@ static void jive_lcm_reset(unsigned int set) { printk(KERN_DEBUG "%s(%d)\n", __func__, set); - s3c2410_gpio_setpin(S3C2410_GPG13, set); - s3c2410_gpio_cfgpin(S3C2410_GPG13, S3C2410_GPIO_OUTPUT); + s3c2410_gpio_setpin(S3C2410_GPG(13), set); + s3c2410_gpio_cfgpin(S3C2410_GPG(13), S3C2410_GPIO_OUTPUT); } #undef LCD_UPPER_MARGIN @@ -391,13 +391,13 @@ static struct ili9320_platdata jive_lcm_config = { static void jive_lcd_spi_chipselect(struct s3c2410_spigpio_info *spi, int cs) { - s3c2410_gpio_setpin(S3C2410_GPB7, cs ? 0 : 1); + s3c2410_gpio_setpin(S3C2410_GPB(7), cs ? 0 : 1); } static struct s3c2410_spigpio_info jive_lcd_spi = { .bus_num = 1, - .pin_clk = S3C2410_GPG8, - .pin_mosi = S3C2410_GPB8, + .pin_clk = S3C2410_GPG(8), + .pin_mosi = S3C2410_GPB(8), .num_chipselect = 1, .chip_select = jive_lcd_spi_chipselect, }; @@ -413,13 +413,13 @@ static struct platform_device jive_device_lcdspi = { static void jive_wm8750_chipselect(struct s3c2410_spigpio_info *spi, int cs) { - s3c2410_gpio_setpin(S3C2410_GPH10, cs ? 0 : 1); + s3c2410_gpio_setpin(S3C2410_GPH(10), cs ? 0 : 1); } static struct s3c2410_spigpio_info jive_wm8750_spi = { .bus_num = 2, - .pin_clk = S3C2410_GPB4, - .pin_mosi = S3C2410_GPB9, + .pin_clk = S3C2410_GPB(4), + .pin_mosi = S3C2410_GPB(9), .num_chipselect = 1, .chip_select = jive_wm8750_chipselect, }; @@ -480,7 +480,7 @@ static struct platform_device *jive_devices[] __initdata = { }; static struct s3c2410_udc_mach_info jive_udc_cfg __initdata = { - .vbus_pin = S3C2410_GPG1, /* detect is on GPG1 */ + .vbus_pin = S3C2410_GPG(1), /* detect is on GPG1 */ }; /* Jive power management device */ @@ -530,8 +530,8 @@ static void jive_power_off(void) { printk(KERN_INFO "powering system down...\n"); - s3c2410_gpio_setpin(S3C2410_GPC5, 1); - s3c2410_gpio_cfgpin(S3C2410_GPC5, S3C2410_GPIO_OUTPUT); + s3c2410_gpio_setpin(S3C2410_GPC(5), 1); + s3c2410_gpio_cfgpin(S3C2410_GPC(5), S3C2410_GPIO_OUTPUT); } static void __init jive_machine_init(void) @@ -635,22 +635,22 @@ static void __init jive_machine_init(void) /* initialise the spi */ - s3c2410_gpio_setpin(S3C2410_GPG13, 0); - s3c2410_gpio_cfgpin(S3C2410_GPG13, S3C2410_GPIO_OUTPUT); + s3c2410_gpio_setpin(S3C2410_GPG(13), 0); + s3c2410_gpio_cfgpin(S3C2410_GPG(13), S3C2410_GPIO_OUTPUT); - s3c2410_gpio_setpin(S3C2410_GPB7, 1); - s3c2410_gpio_cfgpin(S3C2410_GPB7, S3C2410_GPIO_OUTPUT); + s3c2410_gpio_setpin(S3C2410_GPB(7), 1); + s3c2410_gpio_cfgpin(S3C2410_GPB(7), S3C2410_GPIO_OUTPUT); - s3c2410_gpio_setpin(S3C2410_GPB6, 0); - s3c2410_gpio_cfgpin(S3C2410_GPB6, S3C2410_GPIO_OUTPUT); + s3c2410_gpio_setpin(S3C2410_GPB(6), 0); + s3c2410_gpio_cfgpin(S3C2410_GPB(6), S3C2410_GPIO_OUTPUT); - s3c2410_gpio_setpin(S3C2410_GPG8, 1); - s3c2410_gpio_cfgpin(S3C2410_GPG8, S3C2410_GPIO_OUTPUT); + s3c2410_gpio_setpin(S3C2410_GPG(8), 1); + s3c2410_gpio_cfgpin(S3C2410_GPG(8), S3C2410_GPIO_OUTPUT); /* initialise the WM8750 spi */ - s3c2410_gpio_setpin(S3C2410_GPH10, 1); - s3c2410_gpio_cfgpin(S3C2410_GPH10, S3C2410_GPIO_OUTPUT); + s3c2410_gpio_setpin(S3C2410_GPH(10), 1); + s3c2410_gpio_cfgpin(S3C2410_GPH(10), S3C2410_GPIO_OUTPUT); /* Turn off suspend on both USB ports, and switch the * selectable USB port to USB device mode. */ diff --git a/arch/arm/mach-s3c2412/mach-smdk2413.c b/arch/arm/mach-s3c2412/mach-smdk2413.c index 753aaedae551..9a5e43419722 100644 --- a/arch/arm/mach-s3c2412/mach-smdk2413.c +++ b/arch/arm/mach-s3c2412/mach-smdk2413.c @@ -85,10 +85,10 @@ static void smdk2413_udc_pullup(enum s3c2410_udc_cmd_e cmd) switch (cmd) { case S3C2410_UDC_P_ENABLE : - s3c2410_gpio_setpin(S3C2410_GPF2, 1); + s3c2410_gpio_setpin(S3C2410_GPF(2), 1); break; case S3C2410_UDC_P_DISABLE : - s3c2410_gpio_setpin(S3C2410_GPF2, 0); + s3c2410_gpio_setpin(S3C2410_GPF(2), 0); break; case S3C2410_UDC_P_RESET : break; @@ -135,8 +135,8 @@ static void __init smdk2413_machine_init(void) { /* Turn off suspend on both USB ports, and switch the * selectable USB port to USB device mode. */ - s3c2410_gpio_setpin(S3C2410_GPF2, 0); - s3c2410_gpio_cfgpin(S3C2410_GPF2, S3C2410_GPIO_OUTPUT); + s3c2410_gpio_setpin(S3C2410_GPF(2), 0); + s3c2410_gpio_cfgpin(S3C2410_GPF(2), S3C2410_GPIO_OUTPUT); s3c2410_modify_misccr(S3C2410_MISCCR_USBHOST | S3C2410_MISCCR_USBSUSPND0 | -- cgit v1.2.1