From a3e6e13addee8335926e4e5ea4e8f5caf98e783c Mon Sep 17 00:00:00 2001 From: John Stultz Date: Fri, 23 Sep 2016 17:01:05 -0700 Subject: arm: dts: qcom: apq8064-nexus7: Add DSI and panel nodes Add DSI and panel nodes to get graphics up and running on the Nexus7. This still depends on the panel driver being present along with the rpmclk code. Feedback would be greatly appreciated! Cc: Archit Taneja Cc: vinay simha Cc: andy.gross@linaro.org Cc: robdclark@gmail.com Cc: linux-arm-msm@vger.kernel.org Cc: dri-devel@lists.freedesktop.org Signed-off-by: John Stultz Signed-off-by: Andy Gross --- arch/arm/boot/dts/qcom-apq8064-asus-nexus7-flo.dts | 63 +++++++++++++++++++++- 1 file changed, 61 insertions(+), 2 deletions(-) (limited to 'arch/arm/boot/dts/qcom-apq8064-asus-nexus7-flo.dts') diff --git a/arch/arm/boot/dts/qcom-apq8064-asus-nexus7-flo.dts b/arch/arm/boot/dts/qcom-apq8064-asus-nexus7-flo.dts index b72e09506448..4225652aa880 100644 --- a/arch/arm/boot/dts/qcom-apq8064-asus-nexus7-flo.dts +++ b/arch/arm/boot/dts/qcom-apq8064-asus-nexus7-flo.dts @@ -99,6 +99,7 @@ l2 { regulator-min-microvolt = <1200000>; regulator-max-microvolt = <1200000>; + regulator-always-on; }; /* msm_otg-HSUSB_3p3 */ @@ -133,13 +134,14 @@ regulator-min-microvolt = <3000000>; regulator-max-microvolt = <3000000>; bias-pull-down; + regulator-always-on; }; /* pwm_power for backlight */ l17 { regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3600000>; - bias-pull-down; + regulator-max-microvolt = <3000000>; + regulator-always-on; }; /* camera, qdsp6 */ @@ -184,6 +186,63 @@ }; }; + mdp@5100000 { + status = "okay"; + ports { + port@1 { + mdp_dsi1_out: endpoint { + remote-endpoint = <&dsi0_in>; + }; + }; + }; + }; + + dsi0: mdss_dsi@4700000 { + status = "okay"; + vdda-supply = <&pm8921_l2>;/*VDD_MIPI1 to 4*/ + vdd-supply = <&pm8921_l8>; + vddio-supply = <&pm8921_lvs7>; + avdd-supply = <&pm8921_l11>; + vcss-supply = <&ext_3p3v>; + + panel@0 { + reg = <0>; + compatible = "jdi,lt070me05000"; + + vddp-supply = <&pm8921_l17>; + iovcc-supply = <&pm8921_lvs7>; + + enable-gpios = <&pm8921_gpio 36 GPIO_ACTIVE_HIGH>; + reset-gpios = <&tlmm_pinmux 54 GPIO_ACTIVE_LOW>; + dcdc-en-gpios = <&pm8921_gpio 23 GPIO_ACTIVE_HIGH>; + + port { + panel_in: endpoint { + remote-endpoint = <&dsi0_out>; + }; + }; + }; + ports { + port@0 { + dsi0_in: endpoint { + remote-endpoint = <&mdp_dsi1_out>; + }; + }; + + port@1 { + dsi0_out: endpoint { + remote-endpoint = <&panel_in>; + data-lanes = <0 1 2 3>; + }; + }; + }; + }; + + dsi-phy@4700200 { + status = "okay"; + vddio-supply = <&pm8921_lvs7>;/*VDD_PLL2_1 to 7*/ + }; + gsbi@16200000 { status = "okay"; qcom,mode = ; -- cgit v1.2.1