From 93fff4ce19f9978cc1c59db42760717477939249 Mon Sep 17 00:00:00 2001 From: Jason Cooper Date: Tue, 29 Jan 2013 20:36:43 +0000 Subject: ARM: kirkwood: of_serial: fix clock gating by removing clock-frequency When DT support for kirkwood was first introduced, there was no clock infrastructure. As a result, we had to manually pass the clock-frequency to the driver from the device node. Unfortunately, on kirkwood, with minimal config or all module configs, clock-frequency breaks booting because of_serial doesn't consume the gate_clk when clock-frequency is defined. The end result on kirkwood is that runit gets gated, and then the boot fails when the kernel tries to write to the serial port. Fix the issue by removing the clock-frequency parameter from all kirkwood dts files. Booted on dreamplug without earlyprintk and successfully logged in via ttyS0. Reported-by: Simon Baatz Tested-by: Simon Baatz Cc: Signed-off-by: Jason Cooper --- arch/arm/boot/dts/kirkwood.dtsi | 2 -- 1 file changed, 2 deletions(-) (limited to 'arch/arm/boot/dts/kirkwood.dtsi') diff --git a/arch/arm/boot/dts/kirkwood.dtsi b/arch/arm/boot/dts/kirkwood.dtsi index 2c738d9dc82a..19709fbe12cf 100644 --- a/arch/arm/boot/dts/kirkwood.dtsi +++ b/arch/arm/boot/dts/kirkwood.dtsi @@ -57,7 +57,6 @@ reg-shift = <2>; interrupts = <33>; clocks = <&gate_clk 7>; - /* set clock-frequency in board dts */ status = "disabled"; }; @@ -67,7 +66,6 @@ reg-shift = <2>; interrupts = <34>; clocks = <&gate_clk 7>; - /* set clock-frequency in board dts */ status = "disabled"; }; -- cgit v1.2.1 From de88747f514a4e0cca416a8871de2302f4f77790 Mon Sep 17 00:00:00 2001 From: Andrew Lunn Date: Sun, 3 Feb 2013 11:34:26 +0100 Subject: gpio: mvebu: Add clk support to prevent lockup The kirkwood SoC GPIO cores use the runit clock. Add code to clk_prepare_enable() runit, otherwise there is a danger of locking up the SoC by accessing the GPIO registers when runit clock is not ticking. Reported-by: Simon Baatz Signed-off-by: Andrew Lunn Tested-by: Simon Baatz Acked-by: Linus Walleij Cc: Signed-off-by: Jason Cooper --- arch/arm/boot/dts/kirkwood.dtsi | 2 ++ 1 file changed, 2 insertions(+) (limited to 'arch/arm/boot/dts/kirkwood.dtsi') diff --git a/arch/arm/boot/dts/kirkwood.dtsi b/arch/arm/boot/dts/kirkwood.dtsi index 19709fbe12cf..cf8e8926a034 100644 --- a/arch/arm/boot/dts/kirkwood.dtsi +++ b/arch/arm/boot/dts/kirkwood.dtsi @@ -38,6 +38,7 @@ interrupt-controller; #interrupt-cells = <2>; interrupts = <35>, <36>, <37>, <38>; + clocks = <&gate_clk 7>; }; gpio1: gpio@10140 { @@ -49,6 +50,7 @@ interrupt-controller; #interrupt-cells = <2>; interrupts = <39>, <40>, <41>; + clocks = <&gate_clk 7>; }; serial@12000 { -- cgit v1.2.1 From 89c58c198b252f2bc20657fdd72a2aea788c435c Mon Sep 17 00:00:00 2001 From: Andrew Lunn Date: Sun, 3 Feb 2013 12:32:06 +0100 Subject: rtc: rtc-mv: Add support for clk to avoid lockups The Marvell RTC on Kirkwood makes use of the runit clock. Ensure the driver clk_prepare_enable() this clock, otherwise there is a danger the SoC will lockup when accessing RTC registers with the clock disabled. Reported-by: Simon Baatz Signed-off-by: Andrew Lunn Tested-by: Simon Baatz Cc: Signed-off-by: Jason Cooper --- arch/arm/boot/dts/kirkwood.dtsi | 1 + 1 file changed, 1 insertion(+) (limited to 'arch/arm/boot/dts/kirkwood.dtsi') diff --git a/arch/arm/boot/dts/kirkwood.dtsi b/arch/arm/boot/dts/kirkwood.dtsi index cf8e8926a034..fada7e6d24d8 100644 --- a/arch/arm/boot/dts/kirkwood.dtsi +++ b/arch/arm/boot/dts/kirkwood.dtsi @@ -75,6 +75,7 @@ compatible = "marvell,kirkwood-rtc", "marvell,orion-rtc"; reg = <0x10300 0x20>; interrupts = <53>; + clocks = <&gate_clk 7>; }; spi@10600 { -- cgit v1.2.1