From a54fe8a6cf66828499b121c3c39c194b43b8ed94 Mon Sep 17 00:00:00 2001 From: Stefan Wahren Date: Mon, 27 Aug 2018 19:31:17 +0200 Subject: ARM: dts: add Raspberry Pi Compute Module 3 and IO board The Raspberry Pi Compute Module 3 (CM3) and the Raspberry Pi Compute Module 3 Lite (CM3L) are SoMs which contains a BCM2837 processor, 1 GB RAM and a GPIO expander. The CM3 has a 4 GB eMMC, but on the CM3L the eMMC is unpopulated and it's up to the user to connect their own SD/MMC device. The dtsi file is designed to work for both modules. There is also a matching carrier board which is called Compute Module IO Board V3. Signed-off-by: Stefan Wahren --- arch/arm/boot/dts/Makefile | 1 + 1 file changed, 1 insertion(+) (limited to 'arch/arm/boot/dts/Makefile') diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index b5bd3de87c33..35c749fe22eb 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -81,6 +81,7 @@ dtb-$(CONFIG_ARCH_BCM2835) += \ bcm2836-rpi-2-b.dtb \ bcm2837-rpi-3-b.dtb \ bcm2837-rpi-3-b-plus.dtb \ + bcm2837-rpi-cm3-io3.dtb \ bcm2835-rpi-zero.dtb \ bcm2835-rpi-zero-w.dtb dtb-$(CONFIG_ARCH_BCM_5301X) += \ -- cgit v1.2.1 From 202eb5481421040e115526b75317b5ca72584806 Mon Sep 17 00:00:00 2001 From: Marek Vasut Date: Wed, 29 Aug 2018 17:15:04 +0200 Subject: ARM: dts: socfpga: Rename socfpga_cyclone5_de0_{sockit,nano_soc} Rename DT source for DE0 Nano SoC . The board name is really DE0-Nano-SoC or Atlas SoC, and it is not to be confused with SoCkit board, which is a different one. Rename the DT source file to match the board name and to avoid this possible mixup with another different board. Signed-off-by: Marek Vasut Cc: Dinh Nguyen Cc: Jan Kiszka Signed-off-by: Dinh Nguyen --- arch/arm/boot/dts/Makefile | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch/arm/boot/dts/Makefile') diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index b5bd3de87c33..1036d396da83 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -892,7 +892,7 @@ dtb-$(CONFIG_ARCH_SOCFPGA) += \ socfpga_arria10_socdk_sdmmc.dtb \ socfpga_cyclone5_mcvevk.dtb \ socfpga_cyclone5_socdk.dtb \ - socfpga_cyclone5_de0_sockit.dtb \ + socfpga_cyclone5_de0_nano_soc.dtb \ socfpga_cyclone5_sockit.dtb \ socfpga_cyclone5_socrates.dtb \ socfpga_cyclone5_sodia.dtb \ -- cgit v1.2.1 From 742fdc0f2270ec2988518f9d7d629c4415048178 Mon Sep 17 00:00:00 2001 From: Alex Gonzalez Date: Mon, 10 Sep 2018 11:37:52 +0200 Subject: ARM: dts: imx6ul: Add DTS for ConnectCore 6UL SBC Pro The ConnectCore 6UL Single Board Computer (SBC) Pro contains the ConnectCore 6UL System-On-Module. Its hardware specifications are: * 256MB DDR3 memory * On module 256MB NAND flash * Dual 10/100 Ethernet * USB Host and USB OTG * Parallel RGB display header * LVDS display header * CSI camera * GPIO header * I2C, SPI, CAN headers * PCIe mini card and micro SIM slot * MicroSD external storage * On board 4GB eMMC flash * Audio headphone, line in/out, microphone lines Signed-off-by: Alex Gonzalez Signed-off-by: Shawn Guo --- arch/arm/boot/dts/Makefile | 1 + 1 file changed, 1 insertion(+) (limited to 'arch/arm/boot/dts/Makefile') diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index b5bd3de87c33..b3ec70dc517a 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -548,6 +548,7 @@ dtb-$(CONFIG_SOC_IMX6SX) += \ dtb-$(CONFIG_SOC_IMX6UL) += \ imx6ul-14x14-evk.dtb \ imx6ul-ccimx6ulsbcexpress.dtb \ + imx6ul-ccimx6ulsbcpro.dtb \ imx6ul-geam.dtb \ imx6ul-isiot-emmc.dtb \ imx6ul-isiot-nand.dtb \ -- cgit v1.2.1 From c8551f6f3e8ce0a8183ccfe466d3ff6d7c915ab5 Mon Sep 17 00:00:00 2001 From: Yuan Yao Date: Thu, 13 Sep 2018 10:25:16 +0800 Subject: ARM: dts: aspeed: Add HXT StarDragon 4800 REP2 BMC The HXT StarDragon 4800 REP2 (Reference Evaluation Platform) is an aarch64 ARMv8 server platform with an ast2520 BMC. Signed-off-by: Yuan Yao Signed-off-by: Joel Stanley --- arch/arm/boot/dts/Makefile | 1 + 1 file changed, 1 insertion(+) (limited to 'arch/arm/boot/dts/Makefile') diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index b5bd3de87c33..a1b88168c3b0 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -1199,6 +1199,7 @@ dtb-$(CONFIG_ARCH_ZX) += zx296702-ad1.dtb dtb-$(CONFIG_ARCH_ASPEED) += \ aspeed-ast2500-evb.dtb \ aspeed-bmc-arm-centriq2400-rep.dtb \ + aspeed-bmc-arm-stardragon4800-rep2.dtb \ aspeed-bmc-intel-s2600wf.dtb \ aspeed-bmc-opp-lanyang.dtb \ aspeed-bmc-opp-palmetto.dtb \ -- cgit v1.2.1 From 3368e06e2a91a65cff59e520acc51b9adf4900bf Mon Sep 17 00:00:00 2001 From: Vijay Khemka Date: Tue, 18 Sep 2018 16:41:08 -0700 Subject: ARM: dts: aspeed: Adding Facebook TiogaPass BMC Initial introduction of Facebook TiogaPass family equipped with Aspeed 2500 BMC SoC. TiogaPass is a x86 server development kit with a ASPEED ast2500 BMC manufactured by Facebook. Specifically, This adds the TiogaPass platform device tree file including the flash layout used by the TiogaPass BMC machines. Signed-off-by: Vijay Khemka Signed-off-by: Joel Stanley --- arch/arm/boot/dts/Makefile | 1 + 1 file changed, 1 insertion(+) (limited to 'arch/arm/boot/dts/Makefile') diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index a1b88168c3b0..a7c313bfe490 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -1200,6 +1200,7 @@ dtb-$(CONFIG_ARCH_ASPEED) += \ aspeed-ast2500-evb.dtb \ aspeed-bmc-arm-centriq2400-rep.dtb \ aspeed-bmc-arm-stardragon4800-rep2.dtb \ + aspeed-bmc-facebook-tiogapass.dtb \ aspeed-bmc-intel-s2600wf.dtb \ aspeed-bmc-opp-lanyang.dtb \ aspeed-bmc-opp-palmetto.dtb \ -- cgit v1.2.1 From 354c97a9042fd2588f47283910f2e487ab17593f Mon Sep 17 00:00:00 2001 From: Chris Packham Date: Thu, 26 Jul 2018 16:02:57 +1200 Subject: ARM: dts: mvebu: Add device tree for db-88f6820-amc board This board is a plugin card for some of Marvell's switch development kits. It's similar to the non-amc board except that it has no SATA support. [gregory: fix DTC warning and use the new partition binding] Signed-off-by: Chris Packham Signed-off-by: Gregory CLEMENT --- arch/arm/boot/dts/Makefile | 1 + 1 file changed, 1 insertion(+) (limited to 'arch/arm/boot/dts/Makefile') diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index b5bd3de87c33..5575ab02c01b 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -1149,6 +1149,7 @@ dtb-$(CONFIG_MACH_ARMADA_370) += \ dtb-$(CONFIG_MACH_ARMADA_375) += \ armada-375-db.dtb dtb-$(CONFIG_MACH_ARMADA_38X) += \ + armada-385-db-88f6820-amc.dtb \ armada-385-db-ap.dtb \ armada-385-linksys-caiman.dtb \ armada-385-linksys-cobra.dtb \ -- cgit v1.2.1 From bbedc1f1d90e33803001ceb8d9585b2f04fc10d0 Mon Sep 17 00:00:00 2001 From: Martin Blumenstingl Date: Sat, 22 Sep 2018 17:10:03 +0200 Subject: ARM: dts: meson8b: Add support for the Endless Mini (EC-100) The Endless Mini (EC-100) is a grapefruit-sized computer based on the Amlogic Meson8b (S805) SoC which comes in two variants. Both variants have in common: - Amlogic Meson8b (S805) SoC - two USB 2.0 ports on the rear, one one the front (connected to the SoC through an internal hub) - 3.5mm Stereo out and MIC combo port - HDMI and CVBS output - 5V power supply (rated at 3A / 15W) - an internal embedded micro-controller (called "EC") which implements a "breathing" effect for the LED and allows shutting down (powering off) the whole device - 10/100 Mbit/s Ethernet using an IC Plus IP101A/G PHY (note: the website incorrectly lists a Gigabit Ethernet port) - the CPU voltage is regulated using a PWM regulator. The GPL sources of the EC-100 are using a PWM value of 0x1c0000 for 0.86V and a PWM value of 0x00001c for 1.14V. When using the XTAL (24MHz) as input this translates into a PWM period of 1148ns with 0.86V using a duty cycle of 100% and 1.14V using a duty cycle of 0%. The main differences are: - the main indicator for the variant is the RAM size: the "cheaper" variant has 1 GB of RAM, while the more expensive one comes with 2GB - the storage size differs: 24 GB vs 32 GB - the "1 GB RAM" variant has Ethernet connectivity only, while the "2 GB" variant has a Realtek RTL8723BS SDIO chip which adds 802.11b/g/n wifi and Bluetooth 4.0 support Signed-off-by: Martin Blumenstingl Signed-off-by: Kevin Hilman --- arch/arm/boot/dts/Makefile | 1 + 1 file changed, 1 insertion(+) (limited to 'arch/arm/boot/dts/Makefile') diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index b5bd3de87c33..856ebc036cc4 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -321,6 +321,7 @@ dtb-$(CONFIG_MACH_MESON6) += \ meson6-atv1200.dtb dtb-$(CONFIG_MACH_MESON8) += \ meson8-minix-neo-x8.dtb \ + meson8b-ec100.dtb \ meson8b-mxq.dtb \ meson8b-odroidc1.dtb \ meson8m2-mxiii-plus.dtb -- cgit v1.2.1 From 186b45657b244ce865e01b65d73868a48252e1ff Mon Sep 17 00:00:00 2001 From: David Summers Date: Sun, 23 Sep 2018 13:38:07 +0200 Subject: ARM: dts: rockchip: add rk3288-based Tinker board S Add the actual dts for the tinker board S, which brings its own emmc device, not therefore not requiring an sd-card to boot. Signed-off-by: David Summers Signed-off-by: Heiko Stuebner --- arch/arm/boot/dts/Makefile | 1 + 1 file changed, 1 insertion(+) (limited to 'arch/arm/boot/dts/Makefile') diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index b5bd3de87c33..dc86080c60e3 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -864,6 +864,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += \ rk3288-r89.dtb \ rk3288-rock2-square.dtb \ rk3288-tinker.dtb \ + rk3288-tinker-s.dtb \ rk3288-veyron-brain.dtb \ rk3288-veyron-jaq.dtb \ rk3288-veyron-jerry.dtb \ -- cgit v1.2.1 From b57d6b996ebe25e7f1e92de0abc7a2da42005454 Mon Sep 17 00:00:00 2001 From: Marcel Ziswiler Date: Fri, 31 Aug 2018 18:38:16 +0200 Subject: ARM: tegra: apalis_t30: support v1.1 hardware revision Support the V1.1 hardware revisions with the following change: Changed power rail for MMC1 interface to a 3.3V/1.8V switchable rail in order to be able to run UHS SD cards in ultra high speed 1.8V mode. [ 207.502011] mmc2: host does not support reading read-only switch, assuming write-enable [ 207.517011] mmc2: new ultra high speed SDR104 SDHC card at address aaaa [ 207.534190] mmcblk2: mmc2:aaaa SE32G 29.7 GiB [ 207.545096] mmcblk2: p1 root@apalis-t30:~# cat /sys/kernel/debug/mmc2/ios clock: 208000000 Hz actual clock: 204000000 Hz vdd: 21 (3.3 ~ 3.4 V) bus mode: 2 (push-pull) chip select: 0 (don't care) power mode: 2 (on) bus width: 2 (4 bits) timing spec: 6 (sd uhs SDR104) signal voltage: 1 (1.80 V) driver type: 0 (driver type B) root@apalis-t30:~# hdparm -t /dev/mmcblk2 /dev/mmcblk2: Timing buffered disk reads: 256 MB in 3.02 seconds = 84.71 MB/sec Signed-off-by: Marcel Ziswiler Reviewed-by: Rob Herring Signed-off-by: Thierry Reding --- arch/arm/boot/dts/Makefile | 1 + 1 file changed, 1 insertion(+) (limited to 'arch/arm/boot/dts/Makefile') diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index b5bd3de87c33..9d6d7790d627 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -1071,6 +1071,7 @@ dtb-$(CONFIG_ARCH_TEGRA_2x_SOC) += \ tegra20-ventana.dtb dtb-$(CONFIG_ARCH_TEGRA_3x_SOC) += \ tegra30-apalis-eval.dtb \ + tegra30-apalis-v1.1-eval.dtb \ tegra30-beaver.dtb \ tegra30-cardhu-a02.dtb \ tegra30-cardhu-a04.dtb \ -- cgit v1.2.1 From fee8cdc2df088fa2ee4b7f86a803918a3664a26b Mon Sep 17 00:00:00 2001 From: Marcel Ziswiler Date: Sun, 2 Sep 2018 12:09:06 +0200 Subject: ARM: tegra: colibri_t20: add eval board device tree Add an evaluation board device tree more in-line with all our other device trees. Signed-off-by: Marcel Ziswiler Signed-off-by: Thierry Reding --- arch/arm/boot/dts/Makefile | 1 + 1 file changed, 1 insertion(+) (limited to 'arch/arm/boot/dts/Makefile') diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index 9d6d7790d627..d89c31088158 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -1061,6 +1061,7 @@ dtb-$(CONFIG_ARCH_TANGO) += \ tango4-vantage-1172.dtb dtb-$(CONFIG_ARCH_TEGRA_2x_SOC) += \ tegra20-harmony.dtb \ + tegra20-colibri-eval-v3.dtb \ tegra20-colibri-iris.dtb \ tegra20-medcom-wide.dtb \ tegra20-paz00.dtb \ -- cgit v1.2.1 From 20bcd4a4d76d7474047ff4539e7d65b990bb2556 Mon Sep 17 00:00:00 2001 From: "H. Nikolaus Schaller" Date: Tue, 25 Sep 2018 08:04:24 +0200 Subject: ARM: dts: add omap3-gta04a5one to Makefile We have defined a new DTS and it should be compiled. Signed-off-by: H. Nikolaus Schaller Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/Makefile | 1 + 1 file changed, 1 insertion(+) (limited to 'arch/arm/boot/dts/Makefile') diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index b5bd3de87c33..8cb78264adee 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -649,6 +649,7 @@ dtb-$(CONFIG_ARCH_OMAP3) += \ omap3-gta04a3.dtb \ omap3-gta04a4.dtb \ omap3-gta04a5.dtb \ + omap3-gta04a5one.dtb \ omap3-ha.dtb \ omap3-ha-lcd.dtb \ omap3-igep0020.dtb \ -- cgit v1.2.1 From 7f4ddf50c92b6a1d8f25a2a610c3a75785f77a1e Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?SZ=20Lin=20=28=E6=9E=97=E4=B8=8A=E6=99=BA=29?= Date: Fri, 28 Sep 2018 18:47:52 +0800 Subject: ARM: dts: am335x: add support for Moxa UC-2101 open platform MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Add support for Moxa UC-2101 open platform The UC-2101 computing platform is designed for industrial embedded data acquisition and processing applications. The features of UC-2101 are: * eMMC * SPI flash * 1x LAN * 1x RS-232/422/485 ports, software-selectable * EEPROM * TPM 2.0 * Watchdog * RTC * User gpio-keys * User LEDs * User button Signed-off-by: Wes Huang (黃淵河) Signed-off-by: Fero JD Zhou (周俊達) Signed-off-by: SZ Lin (林上智) Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/Makefile | 1 + 1 file changed, 1 insertion(+) (limited to 'arch/arm/boot/dts/Makefile') diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index 8cb78264adee..927fd0ed514e 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -707,6 +707,7 @@ dtb-$(CONFIG_SOC_AM33XX) += \ am335x-evmsk.dtb \ am335x-icev2.dtb \ am335x-lxm.dtb \ + am335x-moxa-uc-2101.dtb \ am335x-moxa-uc-8100-me-t.dtb \ am335x-nano.dtb \ am335x-pdu001.dtb \ -- cgit v1.2.1 From cd3f03df13d4eb1e727fab4a8a20d43eb392c34f Mon Sep 17 00:00:00 2001 From: Diego Rondini Date: Fri, 3 Aug 2018 09:56:25 +0200 Subject: ARM: dts: sun8i: Add initial Orangepi Zero Plus 2 H3 support Orangepi Zero Plus 2 is an open-source single-board computer, available in two Allwinner SOC variants, H3 and H5. We add support for H3 variant here, as the H5 is already supported by sun50i-h5-orangepi-zero-plus2.dts. H3 Orangepi Zero Plus 2 has: - Quad-core Cortex-A7 - 512MB DDR3 - microSD slot and 8GB eMMC - Debug TTL UART - HDMI - Wifi + BT - OTG + power supply Signed-off-by: Diego Rondini Signed-off-by: Maxime Ripard --- arch/arm/boot/dts/Makefile | 1 + 1 file changed, 1 insertion(+) (limited to 'arch/arm/boot/dts/Makefile') diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index b5bd3de87c33..92dc4f05cf23 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -1046,6 +1046,7 @@ dtb-$(CONFIG_MACH_SUN8I) += \ sun8i-h3-orangepi-pc-plus.dtb \ sun8i-h3-orangepi-plus.dtb \ sun8i-h3-orangepi-plus2e.dtb \ + sun8i-h3-orangepi-zero-plus2.dtb \ sun8i-r16-bananapi-m2m.dtb \ sun8i-r16-nintendo-nes-classic.dtb \ sun8i-r16-nintendo-super-nes-classic.dtb \ -- cgit v1.2.1 From 6eeb4180d4b9887b6bc8bbe0a22c1ce3634417f0 Mon Sep 17 00:00:00 2001 From: Chen-Yu Tsai Date: Wed, 26 Sep 2018 21:23:39 +0800 Subject: ARM: dts: sunxi: h3-h5: Add Bananapi M2+ v1.2 device trees Bananapi released an updated revision of the H3/H5 based Bananapi M2+. Version 1.2 enables voltage control for the CPU's regulator by using a GPIO line to toggle a MOSFET that can change the effective resistance value in the regulator's feedback network. This patch adds a common .dtsi file for this new revision, which includes the original common sunxi-bananapi-m2-plus.dtsi file, and adds the GPIO-controlled regulator and a cpu-supply reference. H3 and H5 variant dts files are added as well. Acked-by: Maxime Ripard Signed-off-by: Chen-Yu Tsai --- arch/arm/boot/dts/Makefile | 1 + 1 file changed, 1 insertion(+) (limited to 'arch/arm/boot/dts/Makefile') diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index 92dc4f05cf23..2a1a8c6625ad 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -1033,6 +1033,7 @@ dtb-$(CONFIG_MACH_SUN8I) += \ sun8i-h2-plus-orangepi-r1.dtb \ sun8i-h2-plus-orangepi-zero.dtb \ sun8i-h3-bananapi-m2-plus.dtb \ + sun8i-h3-bananapi-m2-plus-v1.2.dtb \ sun8i-h3-beelink-x2.dtb \ sun8i-h3-libretech-all-h3-cc.dtb \ sun8i-h3-nanopi-m1.dtb \ -- cgit v1.2.1 From 04007fe4c65f4cf3133dd256d9fd82169b7f2f22 Mon Sep 17 00:00:00 2001 From: Anson Huang Date: Sun, 30 Sep 2018 11:32:28 +0800 Subject: ARM: dts: imx: add i.mx6ulz and i.mx6ulz 14x14 evk support i.MX6ULZ is new SoC of i.MX6 family, compared to i.MX6ULL, it removes below modules: - UART5/UART6/UART7/UART8; - PWM5/PWM6/PWM7/PWM8; - eCSPI3/eCSPI4; - CAN1/CAN2; - FEC1/FEC2; - I2C3/I2C4; - EPIT2; - LCDIF; - GPT2; - ADC1; - TSC; This patch adds support for i.MX6ULZ and i.MX6ULZ 14x14 EVK board. Signed-off-by: Anson Huang Signed-off-by: Shawn Guo --- arch/arm/boot/dts/Makefile | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'arch/arm/boot/dts/Makefile') diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index b3ec70dc517a..d7268ae35220 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -560,7 +560,8 @@ dtb-$(CONFIG_SOC_IMX6UL) += \ imx6ul-tx6ul-mainboard.dtb \ imx6ull-14x14-evk.dtb \ imx6ull-colibri-eval-v3.dtb \ - imx6ull-colibri-wifi-eval-v3.dtb + imx6ull-colibri-wifi-eval-v3.dtb \ + imx6ulz-14x14-evk.dtb dtb-$(CONFIG_SOC_IMX7D) += \ imx7d-cl-som-imx7.dtb \ imx7d-colibri-emmc-eval-v3.dtb \ -- cgit v1.2.1