From 543853de356b8ce95d6d99757501d9d5c916ca09 Mon Sep 17 00:00:00 2001 From: Matthias Kaehlcke Date: Tue, 16 May 2017 11:43:42 -0700 Subject: regulator: DT: Add properties for asymmetric settling times Some regulators have different settling times for voltage increases and decreases. Add DT properties to define separate settling times for up- and downward voltage changes. Signed-off-by: Matthias Kaehlcke Acked-by: Laxman Dewangan Acked-by: Rob Herring Signed-off-by: Mark Brown --- Documentation/devicetree/bindings/regulator/regulator.txt | 8 ++++++++ 1 file changed, 8 insertions(+) (limited to 'Documentation') diff --git a/Documentation/devicetree/bindings/regulator/regulator.txt b/Documentation/devicetree/bindings/regulator/regulator.txt index d18edb075e1c..378f6dc8b8bd 100644 --- a/Documentation/devicetree/bindings/regulator/regulator.txt +++ b/Documentation/devicetree/bindings/regulator/regulator.txt @@ -24,6 +24,14 @@ Optional properties: - regulator-settling-time-us: Settling time, in microseconds, for voltage change if regulator have the constant time for any level voltage change. This is useful when regulator have exponential voltage change. +- regulator-settling-time-up-us: Settling time, in microseconds, for voltage + increase if the regulator needs a constant time to settle after voltage + increases of any level. This is useful for regulators with exponential + voltage changes. +- regulator-settling-time-down-us: Settling time, in microseconds, for voltage + decrease if the regulator needs a constant time to settle after voltage + decreases of any level. This is useful for regulators with exponential + voltage changes. - regulator-soft-start: Enable soft start so that voltage ramps slowly - regulator-state-mem sub-root node for Suspend-to-RAM mode : suspend to memory, the device goes to sleep, but all data stored in memory, -- cgit v1.2.1 From a9bc67de0c5713a8675bfe33bfe9cb36c7934589 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Micha=C5=82=20Miros=C5=82aw?= Date: Wed, 14 Jun 2017 21:04:14 +0200 Subject: regulator: tps65910: wire up sleep control configuration MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit This enables configuring the PMIC's sleep mode via device-tree. A pointer indirection to sleep mode data is removed, as it simplifies the implementation slightly. In current kernel tree, platform data structure is not used outside MFD cell drivers. Signed-off-by: Michał Mirosław Signed-off-by: Mark Brown --- Documentation/devicetree/bindings/mfd/tps65910.txt | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'Documentation') diff --git a/Documentation/devicetree/bindings/mfd/tps65910.txt b/Documentation/devicetree/bindings/mfd/tps65910.txt index 38833e63a59f..8af1202b381d 100644 --- a/Documentation/devicetree/bindings/mfd/tps65910.txt +++ b/Documentation/devicetree/bindings/mfd/tps65910.txt @@ -61,6 +61,10 @@ Optional properties: There should be 9 entries here, one for each gpio. - ti,system-power-controller: Telling whether or not this pmic is controlling the system power. +- ti,sleep-enable: Enable SLEEP state. +- ti,sleep-keep-therm: Keep thermal monitoring on in sleep state. +- ti,sleep-keep-ck32k: Keep the 32KHz clock output on in sleep state. +- ti,sleep-keep-hsclk: Keep high speed internal clock on in sleep state. Regulator Optional properties: - ti,regulator-ext-sleep-control: enable external sleep -- cgit v1.2.1