From ceed73a2cf4aff2921802aa3d21d45280677547d Mon Sep 17 00:00:00 2001 From: Subash Abhinov Kasiviswanathan Date: Tue, 29 Aug 2017 22:44:18 -0600 Subject: drivers: net: ethernet: qualcomm: rmnet: Initial implementation RmNet driver provides a transport agnostic MAP (multiplexing and aggregation protocol) support in embedded module. Module provides virtual network devices which can be attached to any IP-mode physical device. This will be used to provide all MAP functionality on future hardware in a single consistent location. Signed-off-by: Subash Abhinov Kasiviswanathan Signed-off-by: David S. Miller --- Documentation/networking/rmnet.txt | 82 ++++++++++++++++++++++++++++++++++++++ 1 file changed, 82 insertions(+) create mode 100644 Documentation/networking/rmnet.txt (limited to 'Documentation/networking') diff --git a/Documentation/networking/rmnet.txt b/Documentation/networking/rmnet.txt new file mode 100644 index 000000000000..6b341eaf2062 --- /dev/null +++ b/Documentation/networking/rmnet.txt @@ -0,0 +1,82 @@ +1. Introduction + +rmnet driver is used for supporting the Multiplexing and aggregation +Protocol (MAP). This protocol is used by all recent chipsets using Qualcomm +Technologies, Inc. modems. + +This driver can be used to register onto any physical network device in +IP mode. Physical transports include USB, HSIC, PCIe and IP accelerator. + +Multiplexing allows for creation of logical netdevices (rmnet devices) to +handle multiple private data networks (PDN) like a default internet, tethering, +multimedia messaging service (MMS) or IP media subsystem (IMS). Hardware sends +packets with MAP headers to rmnet. Based on the multiplexer id, rmnet +routes to the appropriate PDN after removing the MAP header. + +Aggregation is required to achieve high data rates. This involves hardware +sending aggregated bunch of MAP frames. rmnet driver will de-aggregate +these MAP frames and send them to appropriate PDN's. + +2. Packet format + +a. MAP packet (data / control) + +MAP header has the same endianness of the IP packet. + +Packet format - + +Bit 0 1 2-7 8 - 15 16 - 31 +Function Command / Data Reserved Pad Multiplexer ID Payload length +Bit 32 - x +Function Raw Bytes + +Command (1)/ Data (0) bit value is to indicate if the packet is a MAP command +or data packet. Control packet is used for transport level flow control. Data +packets are standard IP packets. + +Reserved bits are usually zeroed out and to be ignored by receiver. + +Padding is number of bytes to be added for 4 byte alignment if required by +hardware. + +Multiplexer ID is to indicate the PDN on which data has to be sent. + +Payload length includes the padding length but does not include MAP header +length. + +b. MAP packet (command specific) + +Bit 0 1 2-7 8 - 15 16 - 31 +Function Command Reserved Pad Multiplexer ID Payload length +Bit 32 - 39 40 - 45 46 - 47 48 - 63 +Function Command name Reserved Command Type Reserved +Bit 64 - 95 +Function Transaction ID +Bit 96 - 127 +Function Command data + +Command 1 indicates disabling flow while 2 is enabling flow + +Command types - +0 for MAP command request +1 is to acknowledge the receipt of a command +2 is for unsupported commands +3 is for error during processing of commands + +c. Aggregation + +Aggregation is multiple MAP packets (can be data or command) delivered to +rmnet in a single linear skb. rmnet will process the individual +packets and either ACK the MAP command or deliver the IP packet to the +network stack as needed + +MAP header|IP Packet|Optional padding|MAP header|IP Packet|Optional padding.... +MAP header|IP Packet|Optional padding|MAP header|Command Packet|Optional pad... + +3. Userspace configuration + +rmnet userspace configuration is done through netlink library librmnetctl +and command line utility rmnetcli. Utility is hosted in codeaurora forum git. +The driver uses rtnl_link_ops for communication. + +https://source.codeaurora.org/quic/la/platform/vendor/qcom-opensource/dataservices/tree/rmnetctl -- cgit v1.2.1