From 651be26f2daf31e61faf4b55ada709cf39ec76a2 Mon Sep 17 00:00:00 2001 From: Olivier Hochreutiner Date: Wed, 8 Mar 2006 03:13:55 +0800 Subject: [PATCH] ipw2200: wireless extension sensitivity threshold support The patch allows the user to set the handover threshold, i.e. the number of consecutively missed beacons that will trigger a roaming attempt. The disassociation threshold is set to 3 times the handover threshold. Signed-off-by: Olivier Hochreutiner Signed-off-by: Zhu Yi Signed-off-by: John W. Linville --- Documentation/networking/README.ipw2200 | 10 ++++++++++ 1 file changed, 10 insertions(+) (limited to 'Documentation/networking') diff --git a/Documentation/networking/README.ipw2200 b/Documentation/networking/README.ipw2200 index 712c5681338b..c2f693e24c7d 100644 --- a/Documentation/networking/README.ipw2200 +++ b/Documentation/networking/README.ipw2200 @@ -30,6 +30,7 @@ Index 2. Ad-Hoc Networking 3. Interacting with Wireless Tools 3.1. iwconfig mode +3.2. iwconfig sens 4. About the Version Numbers 5. Firmware installation 6. Support @@ -383,6 +384,15 @@ When configuring the mode of the adapter, all run-time configured parameters are reset to the value used when the module was loaded. This includes channels, rates, ESSID, etc. +3.2 iwconfig sens +----------------------------------------------- + +The 'iwconfig ethX sens XX' command will not set the signal sensitivity +threshold, as described in iwconfig documentation, but rather the number +of consecutive missed beacons that will trigger handover, i.e. roaming +to another access point. At the same time, it will set the disassociation +threshold to 3 times the given value. + 4. About the Version Numbers ----------------------------------------------- -- cgit v1.2.1