From 9066073c6c27994a30187abf3b674770b4088348 Mon Sep 17 00:00:00 2001 From: Rajendra Nayak Date: Thu, 5 May 2016 14:21:39 +0530 Subject: thermal: qcom: tsens: Add a skeletal TSENS drivers TSENS is Qualcomms' thermal temperature sensor device. It supports reading temperatures from multiple thermal sensors present on various QCOM SoCs. Calibration data is generally read from a non-volatile memory (eeprom) device. Add a skeleton driver with all the necessary abstractions so a variety of qcom device families which support TSENS can add driver extensions. Also add the required device tree bindings which can be used to describe the TSENS device in DT. Signed-off-by: Rajendra Nayak Reviewed-by: Lina Iyer Signed-off-by: Eduardo Valentin Signed-off-by: Zhang Rui --- .../devicetree/bindings/thermal/qcom-tsens.txt | 21 +++++++++++++++++++++ 1 file changed, 21 insertions(+) create mode 100644 Documentation/devicetree/bindings/thermal/qcom-tsens.txt (limited to 'Documentation/devicetree') diff --git a/Documentation/devicetree/bindings/thermal/qcom-tsens.txt b/Documentation/devicetree/bindings/thermal/qcom-tsens.txt new file mode 100644 index 000000000000..292ed89d900b --- /dev/null +++ b/Documentation/devicetree/bindings/thermal/qcom-tsens.txt @@ -0,0 +1,21 @@ +* QCOM SoC Temperature Sensor (TSENS) + +Required properties: +- compatible : + - "qcom,msm8916-tsens" : For 8916 Family of SoCs + - "qcom,msm8974-tsens" : For 8974 Family of SoCs + - "qcom,msm8996-tsens" : For 8996 Family of SoCs + +- reg: Address range of the thermal registers +- #thermal-sensor-cells : Should be 1. See ./thermal.txt for a description. +- Refer to Documentation/devicetree/bindings/nvmem/nvmem.txt to know how to specify +nvmem cells + +Example: +tsens: thermal-sensor@900000 { + compatible = "qcom,msm8916-tsens"; + reg = <0x4a8000 0x2000>; + nvmem-cells = <&tsens_caldata>, <&tsens_calsel>; + nvmem-cell-names = "caldata", "calsel"; + #thermal-sensor-cells = <1>; + }; -- cgit v1.2.1 From 94c2004ef530a9692ae9f417241eb44a51723c51 Mon Sep 17 00:00:00 2001 From: Laxman Dewangan Date: Tue, 23 Aug 2016 13:50:26 +0530 Subject: thermal: max77620: Add DT binding doc for thermal driver Maxim Semiconductor MAX77620 supports alarm interrupts when its die temperature crosses 120C and 140C. These threshold temperatures are not configurable. Add DT binding document to details out the DT property related to MAX77620 thermal functionality. Signed-off-by: Laxman Dewangan Acked-by: Rob Herring Signed-off-by: Zhang Rui --- .../bindings/thermal/max77620_thermal.txt | 70 ++++++++++++++++++++++ 1 file changed, 70 insertions(+) create mode 100644 Documentation/devicetree/bindings/thermal/max77620_thermal.txt (limited to 'Documentation/devicetree') diff --git a/Documentation/devicetree/bindings/thermal/max77620_thermal.txt b/Documentation/devicetree/bindings/thermal/max77620_thermal.txt new file mode 100644 index 000000000000..323a3b3822aa --- /dev/null +++ b/Documentation/devicetree/bindings/thermal/max77620_thermal.txt @@ -0,0 +1,70 @@ +Thermal driver for MAX77620 Power management IC from Maxim Semiconductor. + +Maxim Semiconductor MAX77620 supports alarm interrupts when its +die temperature crosses 120C and 140C. These threshold temperatures +are not configurable. Device does not provide the real temperature +of die other than just indicating whether temperature is above or +below threshold level. + +Required properties: +------------------- +#thermal-sensor-cells: Please refer + for more details. + The value must be 0. + +For more details, please refer generic thermal DT binding document +. + +Please refer for mfd DT binding +document for the MAX77620. + +Example: +-------- +#include +#include +... + +i2c@7000d000 { + spmic: max77620@3c { + compatible = "maxim,max77620"; + ::::: + #thermal-sensor-cells = <0>; + ::: + }; +}; + +cool_dev: cool-dev { + compatible = "cooling-dev"; + #cooling-cells = <2>; +}; + +thermal-zones { + PMIC-Die { + polling-delay = <0>; + polling-delay-passive = <0>; + thermal-sensors = <&spmic>; + + trips { + pmic_die_warn_temp_thresh: hot-die { + temperature = <120000>; + type = "hot"; + hysteresis = <0>; + }; + + pmic_die_cirt_temp_thresh: cirtical-die { + temperature = <140000>; + type = "critical"; + hysteresis = <0>; + }; + }; + + cooling-maps { + map0 { + trip = <&pmic_die_warn_temp_thresh>; + cooling-device = <&cool_dev THERMAL_NO_LIMIT + THERMAL_NO_LIMIT>; + contribution = <100>; + }; + }; + }; +}; -- cgit v1.2.1 From 77d6e7212cd53dd93de6fab26d7ca89c8d591c07 Mon Sep 17 00:00:00 2001 From: "dawei.chien@mediatek.com" Date: Thu, 18 Aug 2016 11:50:51 +0800 Subject: dt-bindings: thermal: Add binding document for Mediatek thermal controller This adds the device tree binding documentation for the mediatek thermal controller found on Mediatek MT2701. Signed-off-by: Dawei Chien Reviewed-by: Keerthy Acked-by: Rob Herring Signed-off-by: Zhang Rui --- Documentation/devicetree/bindings/thermal/mediatek-thermal.txt | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) (limited to 'Documentation/devicetree') diff --git a/Documentation/devicetree/bindings/thermal/mediatek-thermal.txt b/Documentation/devicetree/bindings/thermal/mediatek-thermal.txt index 81f9a512bc2a..e2f494d74d8a 100644 --- a/Documentation/devicetree/bindings/thermal/mediatek-thermal.txt +++ b/Documentation/devicetree/bindings/thermal/mediatek-thermal.txt @@ -8,7 +8,9 @@ apmixedsys register space via AHB bus accesses, so a phandle to the APMIXEDSYS is also needed. Required properties: -- compatible: "mediatek,mt8173-thermal" +- compatible: + - "mediatek,mt8173-thermal" : For MT8173 family of SoCs + - "mediatek,mt2701-thermal" : For MT2701 family of SoCs - reg: Address range of the thermal controller - interrupts: IRQ for the thermal controller - clocks, clock-names: Clocks needed for the thermal controller. required -- cgit v1.2.1 From 44f3d4170e00debf154e778e7068e5d78c41dd82 Mon Sep 17 00:00:00 2001 From: Wei Ni Date: Wed, 11 May 2016 18:20:16 +0800 Subject: of: Add bindings of hw throttle for Tegra soctherm Add HW throttle configuration sub-node for soctherm, which is used to describe the throttle event, and worked as a cooling device. The "hot" type trip in thermal zone can be bound to this cooling device, and trigger the throttle function. Signed-off-by: Wei Ni Acked-by: Rob Herring Signed-off-by: Zhang Rui --- .../bindings/thermal/nvidia,tegra124-soctherm.txt | 121 ++++++++++++++++++++- 1 file changed, 119 insertions(+), 2 deletions(-) (limited to 'Documentation/devicetree') diff --git a/Documentation/devicetree/bindings/thermal/nvidia,tegra124-soctherm.txt b/Documentation/devicetree/bindings/thermal/nvidia,tegra124-soctherm.txt index edebfa0a985e..b6c0ae53d4dc 100644 --- a/Documentation/devicetree/bindings/thermal/nvidia,tegra124-soctherm.txt +++ b/Documentation/devicetree/bindings/thermal/nvidia,tegra124-soctherm.txt @@ -10,8 +10,14 @@ Required properties : - compatible : For Tegra124, must contain "nvidia,tegra124-soctherm". For Tegra132, must contain "nvidia,tegra132-soctherm". For Tegra210, must contain "nvidia,tegra210-soctherm". -- reg : Should contain 1 entry: +- reg : Should contain at least 2 entries for each entry in reg-names: - SOCTHERM register set + - Tegra CAR register set: Required for Tegra124 and Tegra210. + - CCROC register set: Required for Tegra132. +- reg-names : Should contain at least 2 entries: + - soctherm-reg + - car-reg + - ccroc-reg - interrupts : Defines the interrupt used by SOCTHERM - clocks : Must contain an entry for each entry in clock-names. See ../clocks/clock-bindings.txt for details. @@ -25,17 +31,45 @@ Required properties : - #thermal-sensor-cells : Should be 1. See ./thermal.txt for a description of this property. See for a list of valid values when referring to thermal sensors. +- throttle-cfgs: A sub-node which is a container of configuration for each + hardware throttle events. These events can be set as cooling devices. + * throttle events: Sub-nodes must be named as "light" or "heavy". + Properties: + - nvidia,priority: Each throttles has its own throttle settings, so the + SW need to set priorities for various throttle, the HW arbiter can select + the final throttle settings. + Bigger value indicates higher priority, In general, higher priority + translates to lower target frequency. SW needs to ensure that critical + thermal alarms are given higher priority, and ensure that there is + no race if priority of two vectors is set to the same value. + The range of this value is 1~100. + - nvidia,cpu-throt-percent: This property is for Tegra124 and Tegra210. + It is the throttling depth of pulse skippers, it's the percentage + throttling. + - nvidia,cpu-throt-level: This property is only for Tegra132, it is the + level of pulse skippers, which used to throttle clock frequencies. It + indicates cpu clock throttling depth, and the depth can be programmed. + Must set as following values: + TEGRA_SOCTHERM_THROT_LEVEL_LOW, TEGRA_SOCTHERM_THROT_LEVEL_MED + TEGRA_SOCTHERM_THROT_LEVEL_HIGH, TEGRA_SOCTHERM_THROT_LEVEL_NONE + - #cooling-cells: Should be 1. This cooling device only support on/off state. + See ./thermal.txt for a description of this property. Note: - the "critical" type trip points will be set to SOC_THERM hardware as the shut down temperature. Once the temperature of this thermal zone is higher than it, the system will be shutdown or reset by hardware. +- the "hot" type trip points will be set to SOC_THERM hardware as the throttle +temperature. Once the the temperature of this thermal zone is higher +than it, it will trigger the HW throttle event. Example : soctherm@700e2000 { compatible = "nvidia,tegra124-soctherm"; - reg = <0x0 0x700e2000 0x0 0x1000>; + reg = <0x0 0x700e2000 0x0 0x600 /* SOC_THERM reg_base */ + 0x0 0x60006000 0x0 0x400 /* CAR reg_base */ + reg-names = "soctherm-reg", "car-reg"; interrupts = ; clocks = <&tegra_car TEGRA124_CLK_TSENSOR>, <&tegra_car TEGRA124_CLK_SOC_THERM>; @@ -44,6 +78,76 @@ Example : reset-names = "soctherm"; #thermal-sensor-cells = <1>; + + throttle-cfgs { + /* + * When the "heavy" cooling device triggered, + * the HW will skip cpu clock's pulse in 85% depth + */ + throttle_heavy: heavy { + nvidia,priority = <100>; + nvidia,cpu-throt-percent = <85>; + + #cooling-cells = <1>; + }; + + /* + * When the "light" cooling device triggered, + * the HW will skip cpu clock's pulse in 50% depth + */ + throttle_light: light { + nvidia,priority = <80>; + nvidia,cpu-throt-percent = <50>; + + #cooling-cells = <1>; + }; + + /* + * If these two devices are triggered in same time, the HW throttle + * arbiter will select the highest priority as the final throttle + * settings to skip cpu pulse. + */ + }; + }; + +Example: referring to Tegra132's "reg", "reg-names" and "throttle-cfgs" : + + soctherm@700e2000 { + compatible = "nvidia,tegra132-soctherm"; + reg = <0x0 0x700e2000 0x0 0x600 /* SOC_THERM reg_base */ + 0x0 0x70040000 0x0 0x200>; /* CCROC reg_base */; + reg-names = "soctherm-reg", "ccroc-reg"; + + throttle-cfgs { + /* + * When the "heavy" cooling device triggered, + * the HW will skip cpu clock's pulse in HIGH level + */ + throttle_heavy: heavy { + nvidia,priority = <100>; + nvidia,cpu-throt-level = ; + + #cooling-cells = <1>; + }; + + /* + * When the "light" cooling device triggered, + * the HW will skip cpu clock's pulse in MED level + */ + throttle_light: light { + nvidia,priority = <80>; + nvidia,cpu-throt-level = ; + + #cooling-cells = <1>; + }; + + /* + * If these two devices are triggered in same time, the HW throttle + * arbiter will select the highest priority as the final throttle + * settings to skip cpu pulse. + */ + + }; }; Example: referring to thermal sensors : @@ -62,6 +166,19 @@ Example: referring to thermal sensors : hysteresis = <1000>; type = "critical"; }; + + cpu_throttle_trip: throttle-trip { + temperature = <100000>; + hysteresis = <1000>; + type = "hot"; + }; + }; + + cooling-maps { + map0 { + trip = <&cpu_throttle_trip>; + cooling-device = <&throttle_heavy 1 1>; + }; }; }; }; -- cgit v1.2.1